Moved gen7 boards to motherboard type 10, 11 and 12.
Split ramps1.3 in Sprinter like config and multiextruder config.
This commit is contained in:
Erik van der Zalm
parent
5aa9c41ab1
commit
84ea2d61e8
5 changed files with 174 additions and 379 deletions
|
|
@ -16,15 +16,16 @@
|
|||
#define BAUDRATE 115200
|
||||
|
||||
//// The following define selects which electronics board you have. Please choose the one that matches your setup
|
||||
// MEGA/RAMPS up to 1.2 = 3,
|
||||
// RAMPS 1.3 = 33
|
||||
// Gen6 = 5,
|
||||
// Gen7 custom (Alfons3 Version) = 10 "https://github.com/Alfons3/Generation_7_Electronics"
|
||||
// Gen7 v1.1, v1.2 = 11
|
||||
// Gen7 v1.3 = 12
|
||||
// MEGA/RAMPS up to 1.2 = 3
|
||||
// RAMPS 1.3 = 33 (Power outputs: Extruder, Bed, Fan)
|
||||
// RAMPS 1.3 = 34 (Power outputs: Extruder0, Extruder1, Bed)
|
||||
// Gen6 =
|
||||
// Sanguinololu 1.2 and above = 62
|
||||
// Ultimaker = 7,
|
||||
// Gen7 custom (Alfons3 Version) = 77, "https://github.com/Alfons3/Generation_7_Electronics"
|
||||
// Gen7 v1.1, v1.2 = 78
|
||||
// Gen7 v1.3 = 79
|
||||
// Teensylu = 8,
|
||||
// Ultimaker = 7
|
||||
// Teensylu = 8
|
||||
// Gen3+ =9
|
||||
#define MOTHERBOARD 33
|
||||
|
||||
|
|
|
|||
|
|
@ -128,7 +128,6 @@ volatile int feedmultiply=100; //100->1 200->2
|
|||
int saved_feedmultiply;
|
||||
volatile bool feedmultiplychanged=false;
|
||||
volatile int extrudemultiply=100; //100->1 200->2
|
||||
volatile bool extrudemultiplychanged=false;
|
||||
float current_position[NUM_AXIS] = { 0.0, 0.0, 0.0, 0.0 };
|
||||
float add_homeing[3]={0,0,0};
|
||||
uint8_t active_extruder = 0;
|
||||
|
|
@ -1110,7 +1109,7 @@ void process_commands()
|
|||
if(code_seen('S'))
|
||||
{
|
||||
extrudemultiply = code_value() ;
|
||||
extrudemultiplychanged=true;
|
||||
}
|
||||
}
|
||||
break;
|
||||
|
||||
|
|
|
|||
529
Marlin/pins.h
529
Marlin/pins.h
|
|
@ -45,221 +45,179 @@
|
|||
#endif /* 99 */
|
||||
|
||||
/****************************************************************************************
|
||||
* Arduino pin assignment
|
||||
*
|
||||
* ATMega168
|
||||
* +-\/-+
|
||||
* PC6 1| |28 PC5 (AI 5 / D19)
|
||||
* (D 0) PD0 2| |27 PC4 (AI 4 / D18)
|
||||
* (D 1) PD1 3| |26 PC3 (AI 3 / D17)
|
||||
* (D 2) PD2 4| |25 PC2 (AI 2 / D16)
|
||||
* PWM+ (D 3) PD3 5| |24 PC1 (AI 1 / D15)
|
||||
* (D 4) PD4 6| |23 PC0 (AI 0 / D14)
|
||||
* VCC 7| |22 GND
|
||||
* GND 8| |21 AREF
|
||||
* PB6 9| |20 AVCC
|
||||
* PB7 10| |19 PB5 (D 13)
|
||||
* PWM+ (D 5) PD5 11| |18 PB4 (D 12)
|
||||
* PWM+ (D 6) PD6 12| |17 PB3 (D 11) PWM
|
||||
* (D 7) PD7 13| |16 PB2 (D 10) PWM
|
||||
* (D 8) PB0 14| |15 PB1 (D 9) PWM
|
||||
* +----+
|
||||
****************************************************************************************/
|
||||
#if MOTHERBOARD == 0
|
||||
#define KNOWN_BOARD 1
|
||||
|
||||
#ifndef __AVR_ATmega168__
|
||||
#error Oops! Make sure you have 'Arduino Diecimila' selected from the boards menu.
|
||||
#endif
|
||||
|
||||
#define X_STEP_PIN 2
|
||||
#define X_DIR_PIN 3
|
||||
#define X_ENABLE_PIN -1
|
||||
#define X_MIN_PIN 4
|
||||
#define X_MAX_PIN 9
|
||||
|
||||
#define Y_STEP_PIN 10
|
||||
#define Y_DIR_PIN 7
|
||||
#define Y_ENABLE_PIN -1
|
||||
#define Y_MIN_PIN 8
|
||||
#define Y_MAX_PIN 13
|
||||
|
||||
#define Z_STEP_PIN 19
|
||||
#define Z_DIR_PIN 18
|
||||
#define Z_ENABLE_PIN 5
|
||||
#define Z_MIN_PIN 17
|
||||
#define Z_MAX_PIN 16
|
||||
|
||||
#define E0_STEP_PIN 11
|
||||
#define E0_DIR_PIN 12
|
||||
#define E0_ENABLE_PIN -1
|
||||
|
||||
#define SDPOWER -1
|
||||
#define SDSS -1
|
||||
#define LED_PIN -1
|
||||
#define FAN_PIN -1
|
||||
#define PS_ON_PIN 15
|
||||
#define KILL_PIN -1
|
||||
|
||||
#define HEATER_0_PIN 6
|
||||
#define HEATER_1_PIN -1
|
||||
#define HEATER_2_PIN -1
|
||||
#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
||||
#define TEMP_1_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
||||
#define TEMP_2_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
||||
#define HEATER_BED_PIN -1
|
||||
#define TEMP_BED_PIN -1
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
/****************************************************************************************
|
||||
* Sanguino/RepRap Motherboard with direct-drive extruders
|
||||
*
|
||||
* ATMega644P
|
||||
*
|
||||
* +---\/---+
|
||||
* (D 0) PB0 1| |40 PA0 (AI 0 / D31)
|
||||
* (D 1) PB1 2| |39 PA1 (AI 1 / D30)
|
||||
* INT2 (D 2) PB2 3| |38 PA2 (AI 2 / D29)
|
||||
* PWM (D 3) PB3 4| |37 PA3 (AI 3 / D28)
|
||||
* PWM (D 4) PB4 5| |36 PA4 (AI 4 / D27)
|
||||
* MOSI (D 5) PB5 6| |35 PA5 (AI 5 / D26)
|
||||
* MISO (D 6) PB6 7| |34 PA6 (AI 6 / D25)
|
||||
* SCK (D 7) PB7 8| |33 PA7 (AI 7 / D24)
|
||||
* RST 9| |32 AREF
|
||||
* VCC 10| |31 GND
|
||||
* GND 11| |30 AVCC
|
||||
* XTAL2 12| |29 PC7 (D 23)
|
||||
* XTAL1 13| |28 PC6 (D 22)
|
||||
* RX0 (D 8) PD0 14| |27 PC5 (D 21) TDI
|
||||
* TX0 (D 9) PD1 15| |26 PC4 (D 20) TDO
|
||||
* INT0 RX1 (D 10) PD2 16| |25 PC3 (D 19) TMS
|
||||
* INT1 TX1 (D 11) PD3 17| |24 PC2 (D 18) TCK
|
||||
* PWM (D 12) PD4 18| |23 PC1 (D 17) SDA
|
||||
* PWM (D 13) PD5 19| |22 PC0 (D 16) SCL
|
||||
* PWM (D 14) PD6 20| |21 PD7 (D 15) PWM
|
||||
* +--------+
|
||||
* Gen7 v1.1, v1.2, v1.3 pin assignment
|
||||
*
|
||||
****************************************************************************************/
|
||||
#if MOTHERBOARD == 1
|
||||
#define KNOWN_BOARD 1
|
||||
|
||||
#ifndef __AVR_ATmega644P__
|
||||
#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
|
||||
#if MOTHERBOARD == 12
|
||||
#define MOTHERBOARD 11
|
||||
#define GEN7_V_1_3
|
||||
#endif
|
||||
|
||||
#define X_STEP_PIN 15
|
||||
#define X_DIR_PIN 18
|
||||
#define X_ENABLE_PIN 19
|
||||
#define X_MIN_PIN 20
|
||||
#define X_MAX_PIN 21
|
||||
|
||||
#define Y_STEP_PIN 23
|
||||
#define Y_DIR_PIN 22
|
||||
#define Y_ENABLE_PIN 19
|
||||
#define Y_MIN_PIN 25
|
||||
#define Y_MAX_PIN 26
|
||||
|
||||
#define Z_STEP_PIN 29
|
||||
#define Z_DIR_PIN 30
|
||||
#define Z_ENABLE_PIN 31
|
||||
#define Z_MIN_PIN 2
|
||||
#define Z_MAX_PIN 1
|
||||
|
||||
#define E0_STEP_PIN 12
|
||||
#define E0_DIR_PIN 16
|
||||
#define E0_ENABLE_PIN 3
|
||||
|
||||
#define SDPOWER -1
|
||||
#define SDSS -1
|
||||
#define LED_PIN 0
|
||||
#define FAN_PIN -1
|
||||
#define PS_ON_PIN -1
|
||||
#define KILL_PIN -1
|
||||
|
||||
#define HEATER_0_PIN 14
|
||||
#define HEATER_1_PIN -1
|
||||
#define HEATER_2_PIN -1
|
||||
#define TEMP_0_PIN 4 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
||||
#define TEMP_1_PIN -1
|
||||
#define TEMP_2_PIN -1
|
||||
#define HEATER_BED_PIN -1
|
||||
#define TEMP_BED_PIN -1
|
||||
/* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */
|
||||
|
||||
#if MOTHERBOARD == 11
|
||||
#define KNOWN_BOARD
|
||||
|
||||
#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)
|
||||
#error Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu.
|
||||
|
||||
#endif
|
||||
|
||||
//x axis pins
|
||||
#define X_STEP_PIN 19
|
||||
#define X_DIR_PIN 18
|
||||
#define X_ENABLE_PIN 24
|
||||
#define X_MIN_PIN 7
|
||||
#define X_MAX_PIN -1
|
||||
|
||||
/****************************************************************************************
|
||||
* RepRap Motherboard ****---NOOOOOO RS485/EXTRUDER CONTROLLER!!!!!!!!!!!!!!!!!---*******
|
||||
*
|
||||
****************************************************************************************/
|
||||
#if MOTHERBOARD == 2
|
||||
#define KNOWN_BOARD 1
|
||||
//y axis pins
|
||||
#define Y_STEP_PIN 23
|
||||
#define Y_DIR_PIN 22
|
||||
#define Y_ENABLE_PIN 24
|
||||
#define Y_MIN_PIN 5
|
||||
#define Y_MAX_PIN -1
|
||||
|
||||
#ifndef __AVR_ATmega644P__
|
||||
#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
|
||||
//z axis pins
|
||||
#define Z_STEP_PIN 26
|
||||
#define Z_DIR_PIN 25
|
||||
#define Z_ENABLE_PIN 24
|
||||
#define Z_MIN_PIN 1
|
||||
#define Z_MAX_PIN
|
||||
|
||||
//extruder pins
|
||||
#define E0_STEP_PIN 28
|
||||
#define E0_DIR_PIN 27
|
||||
#define E0_ENABLE_PIN 24
|
||||
|
||||
#define TEMP_0_PIN 1
|
||||
#define TEMP_1_PIN -1
|
||||
#define TEMP_2_PIN -1
|
||||
#define TEMP_BED_PIN 2
|
||||
|
||||
#define HEATER_0_PIN 4
|
||||
#define HEATER_1_PIN -1
|
||||
#define HEATER_2_PIN -1
|
||||
#define HEATER_BED_PIN 3
|
||||
|
||||
|
||||
#define SDPOWER -1
|
||||
#define SDSS -1 // SCL pin of I2C header
|
||||
#define LED_PIN -1
|
||||
|
||||
#ifdef GEN7_V_1_3
|
||||
// Gen7 v1.3 removed the fan pin
|
||||
#define FAN_PIN -1
|
||||
#else
|
||||
#define FAN_PIN 31
|
||||
#endif
|
||||
#define PS_ON_PIN 15
|
||||
|
||||
#define X_STEP_PIN 15
|
||||
#define X_DIR_PIN 18
|
||||
#define X_ENABLE_PIN 19
|
||||
#define X_MIN_PIN 20
|
||||
#define X_MAX_PIN 21
|
||||
|
||||
#define Y_STEP_PIN 23
|
||||
#define Y_DIR_PIN 22
|
||||
#define Y_ENABLE_PIN 24
|
||||
#define Y_MIN_PIN 25
|
||||
#define Y_MAX_PIN 26
|
||||
|
||||
#define Z_STEP_PINN 27
|
||||
#define Z_DIR_PINN 28
|
||||
#define Z_ENABLE_PIN 29
|
||||
#define Z_MIN_PIN 30
|
||||
#define Z_MAX_PIN 31
|
||||
|
||||
#define E0_STEP_PIN 17
|
||||
#define E0_DIR_PIN 16
|
||||
#define E0_ENABLE_PIN -1
|
||||
|
||||
#define SDPOWER -1
|
||||
#define SDSS 4
|
||||
#define LED_PIN 0
|
||||
|
||||
#define SD_CARD_WRITE 2
|
||||
#define SD_CARD_DETECT 3
|
||||
#define SD_CARD_SELECT 4
|
||||
//our pin for debugging.
|
||||
#define DEBUG_PIN 0
|
||||
|
||||
//our RS485 pins
|
||||
#define TX_ENABLE_PIN 12
|
||||
#define RX_ENABLE_PIN 13
|
||||
#define TX_ENABLE_PIN 12
|
||||
#define RX_ENABLE_PIN 13
|
||||
|
||||
//pin for controlling the PSU.
|
||||
#define PS_ON_PIN 14
|
||||
#endif
|
||||
|
||||
#define FAN_PIN -1
|
||||
#define KILL_PIN -1
|
||||
/*******************************************************************************
|
||||
*********
|
||||
* Gen7 Alfons3 pin assignment
|
||||
*
|
||||
********************************************************************************
|
||||
********/
|
||||
/* These Pins are assigned for the modified GEN7 Board from Alfons3 Please review the pins and adjust it for your needs*/
|
||||
|
||||
#define HEATER_0_PIN -1
|
||||
#define HEATER_1_PIN -1
|
||||
#define HEATER_2_PIN -1
|
||||
#define TEMP_0_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
||||
#define TEMP_1_PIN -1
|
||||
#define TEMP_2_PIN -1
|
||||
#define HEATER_BED_PIN -1
|
||||
#define TEMP_BED_PIN -1
|
||||
#if MOTHERBOARD == 10
|
||||
#define KNOWN_BOARD
|
||||
|
||||
#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)
|
||||
#error Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu.
|
||||
|
||||
#endif
|
||||
|
||||
//x axis pins
|
||||
#define X_STEP_PIN 21 //different from stanard GEN7
|
||||
#define X_DIR_PIN 20 //different from stanard GEN7
|
||||
#define X_ENABLE_PIN 24
|
||||
#define X_MIN_PIN 0
|
||||
#define X_MAX_PIN -1
|
||||
|
||||
//y axis pins
|
||||
#define Y_STEP_PIN 23
|
||||
#define Y_DIR_PIN 22
|
||||
#define Y_ENABLE_PIN 24
|
||||
#define Y_MIN_PIN 1
|
||||
#define Y_MAX_PIN -1
|
||||
|
||||
//z axis pins
|
||||
#define Z_STEP_PIN 26
|
||||
#define Z_DIR_PIN 25
|
||||
#define Z_ENABLE_PIN 24
|
||||
#define Z_MIN_PIN 2
|
||||
#define Z_MAX_PIN -1
|
||||
|
||||
//extruder pins
|
||||
#define E0_STEP_PIN 28
|
||||
#define E0_DIR_PIN 27
|
||||
#define E0_ENABLE_PIN 24
|
||||
|
||||
#define TEMP_0_PIN 2
|
||||
#define TEMP_1_PIN -1
|
||||
#define TEMP_2_PIN -1
|
||||
#define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
|
||||
|
||||
#define HEATER_0_PIN 4
|
||||
#define HEATER_1_PIN -1
|
||||
#define HEATER_2_PIN -1
|
||||
#define HEATER_BED_PIN 3 // (bed)
|
||||
|
||||
#define SDPOWER -1
|
||||
#define SDSS 31 // SCL pin of I2C header || CS Pin for SD Card support
|
||||
#define LED_PIN -1
|
||||
|
||||
#define FAN_PIN -1
|
||||
#define PS_ON_PIN 19
|
||||
//our pin for debugging.
|
||||
|
||||
#define DEBUG_PIN -1
|
||||
|
||||
//our RS485 pins
|
||||
//#define TX_ENABLE_PIN 12
|
||||
//#define RX_ENABLE_PIN 13
|
||||
|
||||
#define BEEPER -1
|
||||
#define SDCARDDETECT -1
|
||||
#define SUICIDE_PIN -1 //has to be defined; otherwise Power_off doesn't work
|
||||
|
||||
//Pins for 4bit LCD Support
|
||||
#define LCD_PINS_RS 18
|
||||
#define LCD_PINS_ENABLE 17
|
||||
#define LCD_PINS_D4 16
|
||||
#define LCD_PINS_D5 15
|
||||
#define LCD_PINS_D6 13
|
||||
#define LCD_PINS_D7 14
|
||||
|
||||
//buttons are directly attached
|
||||
#define BTN_EN1 11
|
||||
#define BTN_EN2 10
|
||||
#define BTN_ENC 12 //the click
|
||||
|
||||
#define BLEN_C 2
|
||||
#define BLEN_B 1
|
||||
#define BLEN_A 0
|
||||
|
||||
#define encrot0 0
|
||||
#define encrot1 2
|
||||
#define encrot2 3
|
||||
#define encrot3 1
|
||||
#endif
|
||||
|
||||
/****************************************************************************************
|
||||
* Arduino Mega pin assignment
|
||||
*
|
||||
****************************************************************************************/
|
||||
#if MOTHERBOARD == 33
|
||||
#if MOTHERBOARD == 33 || MOTHERBOARD == 34
|
||||
#define MOTHERBOARD 3
|
||||
#define RAMPS_V_1_3
|
||||
#endif
|
||||
|
|
@ -295,7 +253,7 @@
|
|||
#define Z_DIR_PIN 48
|
||||
#define Z_ENABLE_PIN 62
|
||||
#define Z_MIN_PIN 18
|
||||
#define Z_MAX_PIN 19 //19
|
||||
#define Z_MAX_PIN 19
|
||||
|
||||
#define E0_STEP_PIN 26
|
||||
#define E0_DIR_PIN 28
|
||||
|
|
@ -308,13 +266,22 @@
|
|||
#define SDPOWER -1
|
||||
#define SDSS 53
|
||||
#define LED_PIN 13
|
||||
#define FAN_PIN 9 // Uses HEATER_1 on Ramps Board
|
||||
|
||||
#if MOTHERBOARD == 33
|
||||
#define FAN_PIN 9 // (Sprinter config)
|
||||
#else
|
||||
#define FAN_PIN 4 // IO pin. Buffer needed
|
||||
#endif
|
||||
#define PS_ON_PIN 12
|
||||
#define KILL_PIN -1
|
||||
|
||||
#define HEATER_0_PIN 10 // EXTRUDER 1
|
||||
#define HEATER_1_PIN 9 // EXTRUDER 2
|
||||
#define HEATER_2_PIN -1 // EXTRUDER 2
|
||||
#if MOTHERBOARD == 33
|
||||
#define HEATER_1_PIN -1
|
||||
#else
|
||||
#define HEATER_1_PIN 9 // EXTRUDER 2 (FAN On Sprinter)
|
||||
#endif
|
||||
#define HEATER_2_PIN -1
|
||||
#define TEMP_0_PIN 13 // ANALOG NUMBERING
|
||||
#define TEMP_1_PIN 15 // ANALOG NUMBERING
|
||||
#define TEMP_2_PIN -1 // ANALOG NUMBERING
|
||||
|
|
@ -635,180 +602,6 @@
|
|||
|
||||
#endif
|
||||
|
||||
/****************************************************************************************
|
||||
* Gen7 v1.1, v1.2, v1.3 pin assignment
|
||||
*
|
||||
****************************************************************************************/
|
||||
|
||||
#if MOTHERBOARD == 79
|
||||
#define MOTHERBOARD 78
|
||||
#define GEN7_V_1_3
|
||||
#endif
|
||||
|
||||
#if MOTHERBOARD == 78
|
||||
#define KNOWN_BOARD
|
||||
|
||||
#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)
|
||||
#error Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu.
|
||||
|
||||
#endif
|
||||
|
||||
//x axis pins
|
||||
#define X_STEP_PIN 19
|
||||
#define X_DIR_PIN 18
|
||||
#define X_ENABLE_PIN 24
|
||||
#define X_MIN_PIN 7
|
||||
#define X_MAX_PIN -1
|
||||
|
||||
//y axis pins
|
||||
#define Y_STEP_PIN 23
|
||||
#define Y_DIR_PIN 22
|
||||
#define Y_ENABLE_PIN 24
|
||||
#define Y_MIN_PIN 5
|
||||
#define Y_MAX_PIN -1
|
||||
|
||||
//z axis pins
|
||||
#define Z_STEP_PIN 26
|
||||
#define Z_DIR_PIN 25
|
||||
#define Z_ENABLE_PIN 24
|
||||
#define Z_MIN_PIN 1
|
||||
#define Z_MAX_PIN -1
|
||||
|
||||
//extruder pins
|
||||
#define E0_STEP_PIN 28
|
||||
#define E0_DIR_PIN 27
|
||||
#define E0_ENABLE_PIN 24
|
||||
|
||||
#define TEMP_0_PIN 1
|
||||
#define TEMP_1_PIN -1
|
||||
#define TEMP_2_PIN -1
|
||||
#define TEMP_BED_PIN 2
|
||||
|
||||
#define HEATER_0_PIN 4
|
||||
#define HEATER_1_PIN -1
|
||||
#define HEATER_2_PIN -1
|
||||
#define HEATER_BED_PIN 3
|
||||
|
||||
|
||||
#define SDPOWER -1
|
||||
#define SDSS -1 // SCL pin of I2C header
|
||||
#define LED_PIN -1
|
||||
|
||||
#ifdef GEN7_V_1_3
|
||||
// Gen7 v1.3 removed the fan pin
|
||||
#define FAN_PIN -1
|
||||
#else
|
||||
#define FAN_PIN 31
|
||||
#endif
|
||||
#define PS_ON_PIN 15
|
||||
|
||||
//our pin for debugging.
|
||||
#define DEBUG_PIN 0
|
||||
|
||||
//our RS485 pins
|
||||
#define TX_ENABLE_PIN 12
|
||||
#define RX_ENABLE_PIN 13
|
||||
|
||||
#endif
|
||||
|
||||
/*******************************************************************************
|
||||
*********
|
||||
* Gen7 Alfons3 pin assignment
|
||||
*
|
||||
********************************************************************************
|
||||
********/
|
||||
/* These Pins are assigned for the modified GEN7 Board from Alfons3 Please review the pins and adjust it for your needs*/
|
||||
|
||||
#if MOTHERBOARD == 77
|
||||
#define KNOWN_BOARD
|
||||
|
||||
#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)
|
||||
#error Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu.
|
||||
|
||||
#endif
|
||||
|
||||
//x axis pins
|
||||
#define X_STEP_PIN 21 //different from stanard GEN7
|
||||
#define X_DIR_PIN 20 //different from stanard GEN7
|
||||
#define X_ENABLE_PIN 24
|
||||
#define X_MIN_PIN 0
|
||||
#define X_MAX_PIN -1
|
||||
|
||||
//y axis pins
|
||||
#define Y_STEP_PIN 23
|
||||
#define Y_DIR_PIN 22
|
||||
#define Y_ENABLE_PIN 24
|
||||
#define Y_MIN_PIN 1
|
||||
#define Y_MAX_PIN -1
|
||||
|
||||
//z axis pins
|
||||
#define Z_STEP_PIN 26
|
||||
#define Z_DIR_PIN 25
|
||||
#define Z_ENABLE_PIN 24
|
||||
#define Z_MIN_PIN 2
|
||||
#define Z_MAX_PIN -1
|
||||
|
||||
//extruder pins
|
||||
#define E0_STEP_PIN 28
|
||||
#define E0_DIR_PIN 27
|
||||
#define E0_ENABLE_PIN 24
|
||||
|
||||
#define TEMP_0_PIN 2
|
||||
#define TEMP_1_PIN -1
|
||||
#define TEMP_2_PIN -1
|
||||
#define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
|
||||
|
||||
#define HEATER_0_PIN 4
|
||||
#define HEATER_1_PIN -1
|
||||
#define HEATER_2_PIN -1
|
||||
#define HEATER_BED_PIN 3 // (bed)
|
||||
|
||||
|
||||
|
||||
|
||||
#define SDPOWER -1
|
||||
#define SDSS 31 // SCL pin of I2C header || CS Pin for SD Card support
|
||||
#define LED_PIN -1
|
||||
|
||||
#define FAN_PIN -1
|
||||
#define PS_ON_PIN 19
|
||||
//our pin for debugging.
|
||||
|
||||
#define DEBUG_PIN -1
|
||||
|
||||
//our RS485 pins
|
||||
//#define TX_ENABLE_PIN 12
|
||||
//#define RX_ENABLE_PIN 13
|
||||
|
||||
#define BEEPER -1
|
||||
#define SDCARDDETECT -1
|
||||
#define SUICIDE_PIN -1 //has to be defined; otherwise Power_off doesn't work
|
||||
|
||||
//Pins for 4bit LCD Support
|
||||
#define LCD_PINS_RS 18
|
||||
#define LCD_PINS_ENABLE 17
|
||||
#define LCD_PINS_D4 16
|
||||
#define LCD_PINS_D5 15
|
||||
#define LCD_PINS_D6 13
|
||||
#define LCD_PINS_D7 14
|
||||
|
||||
//buttons are directly attached
|
||||
#define BTN_EN1 11
|
||||
#define BTN_EN2 10
|
||||
#define BTN_ENC 12 //the click
|
||||
|
||||
#define BLEN_C 2
|
||||
#define BLEN_B 1
|
||||
#define BLEN_A 0
|
||||
|
||||
|
||||
#define encrot0 0
|
||||
#define encrot1 2
|
||||
#define encrot2 3
|
||||
#define encrot3 1
|
||||
|
||||
|
||||
#endif
|
||||
|
||||
#if MOTHERBOARD == 7
|
||||
#define KNOWN_BOARD
|
||||
|
|
|
|||
|
|
@ -504,7 +504,7 @@ void plan_buffer_line(float &x, float &y, float &z, float &e, float feed_rate, u
|
|||
block->steps_z = labs(target[Z_AXIS]-position[Z_AXIS]);
|
||||
block->steps_e = labs(target[E_AXIS]-position[E_AXIS]);
|
||||
block->steps_e *= extrudemultiply;
|
||||
block-?steps_e /= 100;
|
||||
block->steps_e /= 100;
|
||||
block->step_event_count = max(block->steps_x, max(block->steps_y, max(block->steps_z, block->steps_e)));
|
||||
|
||||
// Bail if this is a zero-length block
|
||||
|
|
|
|||
|
|
@ -9,6 +9,8 @@
|
|||
extern volatile int feedmultiply;
|
||||
extern volatile bool feedmultiplychanged;
|
||||
|
||||
extern volatile int extrudemultiply;
|
||||
|
||||
extern long position[4];
|
||||
extern CardReader card;
|
||||
|
||||
|
|
|
|||
Reference in a new issue