Update Delta example files
Signed-off-by: Joseivaldo Benito Junior <jrbenito@benito.qsl.br>
This commit is contained in:
parent
46d2443c7d
commit
8e48e24c7f
2 changed files with 189 additions and 23 deletions
|
@ -5,6 +5,13 @@
|
||||||
// Advanced settings can be found in Configuration_adv.h
|
// Advanced settings can be found in Configuration_adv.h
|
||||||
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
|
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
|
||||||
|
|
||||||
|
//===========================================================================
|
||||||
|
//============================= DELTA Printer ===============================
|
||||||
|
//===========================================================================
|
||||||
|
// For a Delta printer rplace the configuration files wilth the files in the
|
||||||
|
// example_configurations/delta directory.
|
||||||
|
//
|
||||||
|
|
||||||
// User-specified version info of this build to display in [Pronterface, etc] terminal window during
|
// User-specified version info of this build to display in [Pronterface, etc] terminal window during
|
||||||
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
|
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
|
||||||
// build by the user have been successfully uploaded into firmware.
|
// build by the user have been successfully uploaded into firmware.
|
||||||
|
@ -18,13 +25,18 @@
|
||||||
|
|
||||||
// This determines the communication speed of the printer
|
// This determines the communication speed of the printer
|
||||||
#define BAUDRATE 250000
|
#define BAUDRATE 250000
|
||||||
//#define BAUDRATE 115200
|
|
||||||
|
// This enables the serial port associated to the Bluetooth interface
|
||||||
|
//#define BTENABLED // Enable BT interface on AT90USB devices
|
||||||
|
|
||||||
|
|
||||||
//// The following define selects which electronics board you have. Please choose the one that matches your setup
|
//// The following define selects which electronics board you have. Please choose the one that matches your setup
|
||||||
// 10 = Gen7 custom (Alfons3 Version) "https://github.com/Alfons3/Generation_7_Electronics"
|
// 10 = Gen7 custom (Alfons3 Version) "https://github.com/Alfons3/Generation_7_Electronics"
|
||||||
// 11 = Gen7 v1.1, v1.2 = 11
|
// 11 = Gen7 v1.1, v1.2 = 11
|
||||||
// 12 = Gen7 v1.3
|
// 12 = Gen7 v1.3
|
||||||
// 13 = Gen7 v1.4
|
// 13 = Gen7 v1.4
|
||||||
|
// 2 = Cheaptronic v1.0
|
||||||
|
// 20 = Sethi 3D_1
|
||||||
// 3 = MEGA/RAMPS up to 1.2 = 3
|
// 3 = MEGA/RAMPS up to 1.2 = 3
|
||||||
// 33 = RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Bed)
|
// 33 = RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Bed)
|
||||||
// 34 = RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Bed)
|
// 34 = RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Bed)
|
||||||
|
@ -38,6 +50,7 @@
|
||||||
// 64 = STB V1.1
|
// 64 = STB V1.1
|
||||||
// 65 = Azteeg X1
|
// 65 = Azteeg X1
|
||||||
// 66 = Melzi with ATmega1284 (MaKr3d version)
|
// 66 = Melzi with ATmega1284 (MaKr3d version)
|
||||||
|
// 67 = Azteeg X3
|
||||||
// 7 = Ultimaker
|
// 7 = Ultimaker
|
||||||
// 71 = Ultimaker (Older electronics. Pre 1.5.4. This is rare)
|
// 71 = Ultimaker (Older electronics. Pre 1.5.4. This is rare)
|
||||||
// 77 = 3Drag Controller
|
// 77 = 3Drag Controller
|
||||||
|
@ -45,6 +58,7 @@
|
||||||
// 80 = Rumba
|
// 80 = Rumba
|
||||||
// 81 = Printrboard (AT90USB1286)
|
// 81 = Printrboard (AT90USB1286)
|
||||||
// 82 = Brainwave (AT90USB646)
|
// 82 = Brainwave (AT90USB646)
|
||||||
|
// 83 = SAV Mk-I (AT90USB1286)
|
||||||
// 9 = Gen3+
|
// 9 = Gen3+
|
||||||
// 70 = Megatronics
|
// 70 = Megatronics
|
||||||
// 701= Megatronics v2.0
|
// 701= Megatronics v2.0
|
||||||
|
@ -61,6 +75,10 @@
|
||||||
// Define this to set a custom name for your generic Mendel,
|
// Define this to set a custom name for your generic Mendel,
|
||||||
// #define CUSTOM_MENDEL_NAME "This Mendel"
|
// #define CUSTOM_MENDEL_NAME "This Mendel"
|
||||||
|
|
||||||
|
// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
|
||||||
|
// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
|
||||||
|
// #define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
|
||||||
|
|
||||||
// This defines the number of extruders
|
// This defines the number of extruders
|
||||||
#define EXTRUDERS 1
|
#define EXTRUDERS 1
|
||||||
|
|
||||||
|
@ -70,6 +88,8 @@
|
||||||
|
|
||||||
#define POWER_SUPPLY 1
|
#define POWER_SUPPLY 1
|
||||||
|
|
||||||
|
// Define this to have the electronics keep the powersupply off on startup. If you don't know what this is leave it.
|
||||||
|
// #define PS_DEFAULT_OFF
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================== Delta Settings =============================
|
//============================== Delta Settings =============================
|
||||||
|
@ -82,8 +102,6 @@
|
||||||
// and processor overload (too many expensive sqrt calls).
|
// and processor overload (too many expensive sqrt calls).
|
||||||
#define DELTA_SEGMENTS_PER_SECOND 200
|
#define DELTA_SEGMENTS_PER_SECOND 200
|
||||||
|
|
||||||
// NOTE NB all values for DELTA_* values MOUST be floating point, so always have a decimal point in them
|
|
||||||
|
|
||||||
// Center-to-center distance of the holes in the diagonal push rods.
|
// Center-to-center distance of the holes in the diagonal push rods.
|
||||||
#define DELTA_DIAGONAL_ROD 250.0 // mm
|
#define DELTA_DIAGONAL_ROD 250.0 // mm
|
||||||
|
|
||||||
|
@ -99,8 +117,6 @@
|
||||||
// Effective horizontal distance bridged by diagonal push rods.
|
// Effective horizontal distance bridged by diagonal push rods.
|
||||||
#define DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-DELTA_EFFECTOR_OFFSET-DELTA_CARRIAGE_OFFSET)
|
#define DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-DELTA_EFFECTOR_OFFSET-DELTA_CARRIAGE_OFFSET)
|
||||||
|
|
||||||
#define DELTA_DIAGONAL_ROD_2 sq(DELTA_DIAGONAL_ROD)
|
|
||||||
|
|
||||||
// Effective X/Y positions of the three vertical towers.
|
// Effective X/Y positions of the three vertical towers.
|
||||||
#define SIN_60 0.8660254037844386
|
#define SIN_60 0.8660254037844386
|
||||||
#define COS_60 0.5
|
#define COS_60 0.5
|
||||||
|
@ -125,9 +141,10 @@
|
||||||
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||||
// 3 is mendel-parts thermistor (4.7k pullup)
|
// 3 is mendel-parts thermistor (4.7k pullup)
|
||||||
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||||
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan) (4.7k pullup)
|
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
||||||
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||||
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||||
|
// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||||
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||||
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
|
@ -137,7 +154,7 @@
|
||||||
// (but gives greater accuracy and more stable PID)
|
// (but gives greater accuracy and more stable PID)
|
||||||
// 51 is 100k thermistor - EPCOS (1k pullup)
|
// 51 is 100k thermistor - EPCOS (1k pullup)
|
||||||
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||||
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan) (1k pullup)
|
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||||
|
|
||||||
#define TEMP_SENSOR_0 -1
|
#define TEMP_SENSOR_0 -1
|
||||||
#define TEMP_SENSOR_1 -1
|
#define TEMP_SENSOR_1 -1
|
||||||
|
@ -282,16 +299,15 @@
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins.
|
// The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins.
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||||
const bool X_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||||
|
//#define DISABLE_MAX_ENDSTOPS
|
||||||
// deltas never have min endstops
|
// Deltas never have min endstops
|
||||||
#define DISABLE_MIN_ENDSTOPS
|
#define DISABLE_MIN_ENDSTOPS
|
||||||
|
|
||||||
// Disable max endstops for compatibility with endstop checking routine
|
// Disable max endstops for compatibility with endstop checking routine
|
||||||
#if defined(COREXY) && !defined(DISABLE_MAX_ENDSTOPS)
|
#if defined(COREXY) && !defined(DISABLE_MAX_ENDSTOPS)
|
||||||
#define DISABLE_MAX_ENDSTOPS
|
#define DISABLE_MAX_ENDSTOPS
|
||||||
|
@ -338,6 +354,58 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||||
#define X_MAX_LENGTH (X_MAX_POS - X_MIN_POS)
|
#define X_MAX_LENGTH (X_MAX_POS - X_MIN_POS)
|
||||||
#define Y_MAX_LENGTH (Y_MAX_POS - Y_MIN_POS)
|
#define Y_MAX_LENGTH (Y_MAX_POS - Y_MIN_POS)
|
||||||
#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS)
|
#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS)
|
||||||
|
//============================= Bed Auto Leveling ===========================
|
||||||
|
|
||||||
|
//#define ENABLE_AUTO_BED_LEVELING // Delete the comment to enable (remove // at the start of the line)
|
||||||
|
|
||||||
|
#ifdef ENABLE_AUTO_BED_LEVELING
|
||||||
|
|
||||||
|
// these are the positions on the bed to do the probing
|
||||||
|
#define LEFT_PROBE_BED_POSITION 15
|
||||||
|
#define RIGHT_PROBE_BED_POSITION 170
|
||||||
|
#define BACK_PROBE_BED_POSITION 180
|
||||||
|
#define FRONT_PROBE_BED_POSITION 20
|
||||||
|
|
||||||
|
// these are the offsets to the prob relative to the extruder tip (Hotend - Probe)
|
||||||
|
#define X_PROBE_OFFSET_FROM_EXTRUDER -25
|
||||||
|
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29
|
||||||
|
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35
|
||||||
|
|
||||||
|
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z before homing (G28) for Probe Clearance.
|
||||||
|
// Be sure you have this distance over your Z_MAX_POS in case
|
||||||
|
|
||||||
|
#define XY_TRAVEL_SPEED 8000 // X and Y axis travel speed between probes, in mm/min
|
||||||
|
|
||||||
|
#define Z_RAISE_BEFORE_PROBING 15 //How much the extruder will be raised before traveling to the first probing point.
|
||||||
|
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when traveling from between next probing points
|
||||||
|
|
||||||
|
|
||||||
|
//If defined, the Probe servo will be turned on only during movement and then turned off to avoid jerk
|
||||||
|
//The value is the delay to turn the servo off after powered on - depends on the servo speed; 300ms is good value, but you can try lower it.
|
||||||
|
// You MUST HAVE the SERVO_ENDSTOPS defined to use here a value higher than zero otherwise your code will not compile.
|
||||||
|
|
||||||
|
// #define PROBE_SERVO_DEACTIVATION_DELAY 300
|
||||||
|
|
||||||
|
|
||||||
|
//If you have enabled the Bed Auto Levelling and are using the same Z Probe for Z Homing,
|
||||||
|
//it is highly recommended you let this Z_SAFE_HOMING enabled!!!
|
||||||
|
|
||||||
|
#define Z_SAFE_HOMING // This feature is meant to avoid Z homing with probe outside the bed area.
|
||||||
|
// When defined, it will:
|
||||||
|
// - Allow Z homing only after X and Y homing AND stepper drivers still enabled
|
||||||
|
// - If stepper drivers timeout, it will need X and Y homing again before Z homing
|
||||||
|
// - Position the probe in a defined XY point before Z Homing when homing all axis (G28)
|
||||||
|
// - Block Z homing only when the probe is outside bed area.
|
||||||
|
|
||||||
|
#ifdef Z_SAFE_HOMING
|
||||||
|
|
||||||
|
#define Z_SAFE_HOMING_X_POINT (X_MAX_LENGTH/2) // X point for Z homing when homing all axis (G28)
|
||||||
|
#define Z_SAFE_HOMING_Y_POINT (Y_MAX_LENGTH/2) // Y point for Z homing when homing all axis (G28)
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
// The position of the homing switches
|
// The position of the homing switches
|
||||||
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
|
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
|
||||||
|
@ -406,7 +474,8 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||||
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
|
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
|
||||||
//#define SDSUPPORT // Enable SD Card Support in Hardware Console
|
//#define SDSUPPORT // Enable SD Card Support in Hardware Console
|
||||||
//#define SDSLOW // Use slower SD transfer mode (not normally needed - uncomment if you're getting volume init error)
|
//#define SDSLOW // Use slower SD transfer mode (not normally needed - uncomment if you're getting volume init error)
|
||||||
|
//#define ENCODER_PULSES_PER_STEP 1 // Increase if you have a high resolution encoder
|
||||||
|
//#define ENCODER_STEPS_PER_MENU_ITEM 5 // Set according to ENCODER_PULSES_PER_STEP or your liking
|
||||||
//#define ULTIMAKERCONTROLLER //as available from the ultimaker online store.
|
//#define ULTIMAKERCONTROLLER //as available from the ultimaker online store.
|
||||||
//#define ULTIPANEL //the ultipanel as on thingiverse
|
//#define ULTIPANEL //the ultipanel as on thingiverse
|
||||||
|
|
||||||
|
@ -510,6 +579,17 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||||
#define ULTIPANEL
|
#define ULTIPANEL
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Shift register panels
|
||||||
|
// ---------------------
|
||||||
|
// 2 wire Non-latching LCD SR from:
|
||||||
|
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
|
||||||
|
//#define SR_LCD
|
||||||
|
#ifdef SR_LCD
|
||||||
|
#define SR_LCD_2W_NL // Non latching 2 wire shiftregister
|
||||||
|
//#define NEWPANEL
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
#ifdef ULTIPANEL
|
#ifdef ULTIPANEL
|
||||||
// #define NEWPANEL //enable this if you have a click-encoder panel
|
// #define NEWPANEL //enable this if you have a click-encoder panel
|
||||||
#define SDSUPPORT
|
#define SDSUPPORT
|
||||||
|
@ -543,6 +623,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||||
// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino
|
// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino
|
||||||
//#define FAST_PWM_FAN
|
//#define FAST_PWM_FAN
|
||||||
|
|
||||||
|
// Temperature status leds that display the hotend and bet temperature.
|
||||||
|
// If alle hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on.
|
||||||
|
// Otherwise the RED led is on. There is 1C hysteresis.
|
||||||
|
//#define TEMP_STAT_LEDS
|
||||||
|
|
||||||
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
||||||
// which is not ass annoying as with the hardware PWM. On the other hand, if this frequency
|
// which is not ass annoying as with the hardware PWM. On the other hand, if this frequency
|
||||||
// is too low, you should also increment SOFT_PWM_SCALE.
|
// is too low, you should also increment SOFT_PWM_SCALE.
|
||||||
|
@ -564,6 +649,9 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||||
// Support for the BariCUDA Paste Extruder.
|
// Support for the BariCUDA Paste Extruder.
|
||||||
//#define BARICUDA
|
//#define BARICUDA
|
||||||
|
|
||||||
|
//define BlinkM/CyzRgb Support
|
||||||
|
//#define BLINKM
|
||||||
|
|
||||||
/*********************************************************************\
|
/*********************************************************************\
|
||||||
* R/C SERVO support
|
* R/C SERVO support
|
||||||
* Sponsored by TrinityLabs, Reworked by codexmas
|
* Sponsored by TrinityLabs, Reworked by codexmas
|
||||||
|
|
|
@ -40,6 +40,10 @@
|
||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
//Show Temperature ADC value
|
||||||
|
//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
|
||||||
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
|
|
||||||
// extruder run-out prevention.
|
// extruder run-out prevention.
|
||||||
//if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
|
//if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
|
||||||
//#define EXTRUDER_RUNOUT_PREVENT
|
//#define EXTRUDER_RUNOUT_PREVENT
|
||||||
|
@ -146,6 +150,21 @@
|
||||||
#define EXTRUDERS 1
|
#define EXTRUDERS 1
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Same again but for Y Axis.
|
||||||
|
//#define Y_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
// Define if the two Y drives need to rotate in opposite directions
|
||||||
|
#define INVERT_Y2_VS_Y_DIR true
|
||||||
|
|
||||||
|
#ifdef Y_DUAL_STEPPER_DRIVERS
|
||||||
|
#undef EXTRUDERS
|
||||||
|
#define EXTRUDERS 1
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if defined (Z_DUAL_STEPPER_DRIVERS) && defined (Y_DUAL_STEPPER_DRIVERS)
|
||||||
|
#error "You cannot have dual drivers for both Y and Z"
|
||||||
|
#endif
|
||||||
|
|
||||||
// Enable this for dual x-carriage printers.
|
// Enable this for dual x-carriage printers.
|
||||||
// A dual x-carriage design has the advantage that the inactive extruder can be parked which
|
// A dual x-carriage design has the advantage that the inactive extruder can be parked which
|
||||||
// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage
|
// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage
|
||||||
|
@ -155,8 +174,8 @@
|
||||||
// Configuration for second X-carriage
|
// Configuration for second X-carriage
|
||||||
// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
|
// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
|
||||||
// the second x-carriage always homes to the maximum endstop.
|
// the second x-carriage always homes to the maximum endstop.
|
||||||
#define X2_MIN_POS 88 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
|
#define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
|
||||||
#define X2_MAX_POS 350.45 // set maximum to the distance between toolheads when both heads are homed
|
#define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed
|
||||||
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
|
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
|
||||||
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
|
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
|
||||||
// However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software
|
// However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software
|
||||||
|
@ -169,6 +188,28 @@
|
||||||
#define X2_STEP_PIN 25
|
#define X2_STEP_PIN 25
|
||||||
#define X2_DIR_PIN 23
|
#define X2_DIR_PIN 23
|
||||||
|
|
||||||
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||||
|
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||||
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||||
|
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||||
|
// that additional slicer support is not required. (M605 S1)
|
||||||
|
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||||
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||||
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||||
|
|
||||||
|
// This is the default power-up mode which can be later using M605.
|
||||||
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE 0
|
||||||
|
|
||||||
|
// As the x-carriages are independent we can now account for any relative Z offset
|
||||||
|
#define EXTRUDER1_Z_OFFSET 0.0 // z offset relative to extruder 0
|
||||||
|
|
||||||
|
// Default settings in "Auto-park Mode"
|
||||||
|
#define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder
|
||||||
|
#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder
|
||||||
|
|
||||||
|
// Default x offset in duplication mode (typically set to half print bed width)
|
||||||
|
#define DEFAULT_DUPLICATION_X_OFFSET 100
|
||||||
|
|
||||||
#endif //DUAL_X_CARRIAGE
|
#endif //DUAL_X_CARRIAGE
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
||||||
|
@ -176,7 +217,6 @@
|
||||||
#define Y_HOME_RETRACT_MM 5
|
#define Y_HOME_RETRACT_MM 5
|
||||||
#define Z_HOME_RETRACT_MM 5 // deltas need the same for all three axis
|
#define Z_HOME_RETRACT_MM 5 // deltas need the same for all three axis
|
||||||
|
|
||||||
|
|
||||||
//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
|
//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
|
||||||
|
|
||||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||||
|
@ -238,6 +278,11 @@
|
||||||
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
|
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
|
||||||
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
|
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
|
||||||
|
|
||||||
|
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the filesystem block order.
|
||||||
|
// if a file is deleted, it frees a block. hence, the order is not purely cronological. To still have auto0.g accessible, there is again the option to do that.
|
||||||
|
// using:
|
||||||
|
//#define MENU_ADDAUTOSTART
|
||||||
|
|
||||||
// The hardware watchdog should reset the Microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
// The hardware watchdog should reset the Microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
||||||
//#define USE_WATCHDOG
|
//#define USE_WATCHDOG
|
||||||
|
|
||||||
|
@ -251,6 +296,26 @@
|
||||||
// Enable the option to stop SD printing when hitting and endstops, needs to be enabled from the LCD menu when this option is enabled.
|
// Enable the option to stop SD printing when hitting and endstops, needs to be enabled from the LCD menu when this option is enabled.
|
||||||
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
|
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
|
||||||
|
|
||||||
|
// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
|
||||||
|
// it can e.g. be used to change z-positions in the print startup phase in realtime
|
||||||
|
// does not respect endstops!
|
||||||
|
//#define BABYSTEPPING
|
||||||
|
#ifdef BABYSTEPPING
|
||||||
|
#define BABYSTEP_XY //not only z, but also XY in the menu. more clutter, more functions
|
||||||
|
#define BABYSTEP_INVERT_Z false //true for inverse movements in Z
|
||||||
|
#define BABYSTEP_Z_MULTIPLICATOR 2 //faster z movements
|
||||||
|
|
||||||
|
#ifdef COREXY
|
||||||
|
#error BABYSTEPPING not implemented for COREXY yet.
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef DELTA
|
||||||
|
#ifdef BABYSTEP_XY
|
||||||
|
#error BABYSTEPPING only implemented for Z axis on deltabots.
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
// extruder advance constant (s2/mm3)
|
// extruder advance constant (s2/mm3)
|
||||||
//
|
//
|
||||||
// advance (steps) = STEPS_PER_CUBIC_MM_E * EXTUDER_ADVANCE_K * cubic mm per second ^ 2
|
// advance (steps) = STEPS_PER_CUBIC_MM_E * EXTUDER_ADVANCE_K * cubic mm per second ^ 2
|
||||||
|
@ -302,6 +367,9 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||||
#define PS_ON_ASLEEP LOW
|
#define PS_ON_ASLEEP LOW
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
// Control heater 0 and heater 1 in parallel.
|
||||||
|
//#define HEATERS_PARALLEL
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//=============================Buffers ============================
|
//=============================Buffers ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
@ -332,7 +400,7 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||||
|
|
||||||
//adds support for experimental filament exchange support M600; requires display
|
//adds support for experimental filament exchange support M600; requires display
|
||||||
#ifdef ULTIPANEL
|
#ifdef ULTIPANEL
|
||||||
//#define FILAMENTCHANGEENABLE
|
#define FILAMENTCHANGEENABLE
|
||||||
#ifdef FILAMENTCHANGEENABLE
|
#ifdef FILAMENTCHANGEENABLE
|
||||||
#define FILAMENTCHANGE_XPOS 3
|
#define FILAMENTCHANGE_XPOS 3
|
||||||
#define FILAMENTCHANGE_YPOS 3
|
#define FILAMENTCHANGE_YPOS 3
|
||||||
|
@ -342,6 +410,12 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#ifdef FILAMENTCHANGEENABLE
|
||||||
|
#ifdef EXTRUDER_RUNOUT_PREVENT
|
||||||
|
#error EXTRUDER_RUNOUT_PREVENT currently incompatible with FILAMENTCHANGE
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Define Defines ============================
|
//============================= Define Defines ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
@ -349,6 +423,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||||
#error "You cannot use TEMP_SENSOR_1_AS_REDUNDANT if EXTRUDERS > 1"
|
#error "You cannot use TEMP_SENSOR_1_AS_REDUNDANT if EXTRUDERS > 1"
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#if EXTRUDERS > 1 && defined HEATERS_PARALLEL
|
||||||
|
#error "You cannot use HEATERS_PARALLEL if EXTRUDERS > 1"
|
||||||
|
#endif
|
||||||
|
|
||||||
#if TEMP_SENSOR_0 > 0
|
#if TEMP_SENSOR_0 > 0
|
||||||
#define THERMISTORHEATER_0 TEMP_SENSOR_0
|
#define THERMISTORHEATER_0 TEMP_SENSOR_0
|
||||||
#define HEATER_0_USES_THERMISTOR
|
#define HEATER_0_USES_THERMISTOR
|
||||||
|
|
Reference in a new issue