Commit graph

1678 commits

Author SHA1 Message Date
esenapaj 069c6b38dd Remove unnecessary tabs and spaces 2016-12-16 00:21:32 +09:00
Scott Lahteine 8d9fcd8e6f Merge pull request #5495 from AnHardt/autoadjusting_display-updates
Adaptive screen updates for all kinds of displays
2016-12-14 04:16:26 -08:00
AnHardt d0e24e0876 Adaptive screen updates for all kinds of displays
The target here is to update the screens of graphical and char base
displays as fast as possible, without draining the planner buffer too much.

For that measure the time it takes to draw and transfer one
(partial) screen to the display. Build a max. value from that.
Because ther can be large differences, depending on how much the display
updates are interrupted, the max value is decreased by one ms/s. This way
it can shrink again.
On the other side we keep track on how much time it takes to empty the
planner buffer.
Now we draw the next (partial) display update only then, when we do not
drain the planner buffer to much. We draw only when the time in the
buffer is two times larger than a update takes, or the buffer is empty anyway.

When we have begun to draw a screen we do not wait until the next 100ms
time slot comes. We draw the next partial screen as fast as possible, but
give the system a chance to refill the buffers a bit.

When we see, during drawing a screen, the screen contend has changed,
we stop the current draw and begin to draw the new content from the top.
2016-12-13 18:44:34 +01:00
Scott Lahteine 94ffb58da7 Prevent retract un-hop at wrong height 2016-12-13 08:24:12 -08:00
Scott Lahteine 4bc6536f54 Move to safe zone on DELTA if using do_blocking_move_to* 2016-12-10 21:28:24 -08:00
esenapaj e9393c3634 Suppress warnings, etc
・Suppress warnings
・Remove unused variable "did_update"
2016-12-08 17:47:59 +09:00
Scott Lahteine 83c5026db1 Ignore homing button when SD printing
As suggested in #5404 by @android444
2016-12-06 14:22:34 -06:00
akaJes d7b948610a Experimental bilinear subdivision option 2016-12-05 20:11:24 -06:00
Scott Lahteine b203901143 Merge pull request #5393 from AnHardt/Fix-auto_report_temperatures
Fix auto_report_temperatures()
2016-12-05 19:38:23 -06:00
AnHardt 59a27ed27d Fix auto_report_temperatures()
The `auto_report_temperatures` needs a linefeed to be recognized by Repetier Host.
2016-12-06 01:26:44 +01:00
Scott Lahteine b6b100c471 Merge pull request #5371 from thinkyhead/rc_extruders_can_differ
Allow distinct factors for multiple extruders
2016-12-05 11:22:31 -06:00
Scott Lahteine 3391c785c6 Support for distinct E factors 2016-12-05 07:26:18 -06:00
Scott Lahteine c47e07d129 Fix Dual X software endstops 2016-12-05 06:51:41 -06:00
Scott Lahteine 4217e9653e Adjust park code in tool_change 2016-12-05 06:51:41 -06:00
Scott Lahteine b20405db31 Only DXC_AUTO_PARK_MODE should auto-move in tool_change 2016-12-05 06:48:43 -06:00
Scott Lahteine ca24af7d5d Dual X with home_z_safely is not parked 2016-12-05 06:43:26 -06:00
Scott Lahteine 0e15b4f434 Dual X set_axis_is_at_home can use x_home_pos for both 2016-12-05 06:43:26 -06:00
Scott Lahteine 54109dfaec Reduce code size for Dual X un-park 2016-12-05 06:43:26 -06:00
Scott Lahteine fe96f74db1 Use const arguments in Dual X helper functions 2016-12-05 06:43:26 -06:00
Scott Lahteine 41278c1e8b Apply LOGICAL_POSITION to home positions on Dual X 2016-12-05 06:43:26 -06:00
Scott Lahteine 053fb55af6 Fix modes ordering in prepare_move_to_destination_dualx 2016-12-05 06:43:26 -06:00
Scott Lahteine 56dd15c0ad Use SET_INPUT for PS_ON_PIN in kill 2016-12-05 06:43:26 -06:00
Scott Lahteine c06161b773 Use apply_leveling, not MBL directly 2016-12-05 01:53:36 -06:00
Scott Lahteine fccc97de6d Save PROGMEM with string changes
Unlike RAM-based strings, PROGMEM strings aren’t consolidated by the
compiler.
2016-12-03 19:21:46 -06:00
Scott Lahteine 27dd5acc22 Fix set_led_color for BLINKM
Follow-up to #5330
2016-12-03 01:51:11 -06:00
Scott Lahteine f60b4f8659 Allow case light pin to be active low 2016-12-01 23:32:34 -06:00
Scott Lahteine 65c50e062e Support for an RGB LED using 3 pins 2016-11-30 00:02:31 -06:00
Scott Lahteine 092e949b58 Merge pull request #5169 from thinkyhead/rc_core_inverted
Support for COREYX, COREZX, COREZY
2016-11-28 02:26:41 -06:00
Scott Lahteine c7935bb0d2 Merge pull request #5299 from thinkyhead/rc_bed_correction_fade
Add a fade factor for mesh leveling
2016-11-28 02:07:51 -06:00
Scott Lahteine 61437d988a Fix and optimize case-light code 2016-11-28 01:34:52 -06:00
Scott Lahteine f6f77d34a1 Add a fade factor for mesh leveling 2016-11-26 03:41:26 -06:00
Scott Lahteine 2e966f8e5b Patch Capabilities Report for "PROGRESS" 2016-11-23 19:31:46 -06:00
Scott Lahteine d891324830 Merge pull request #5258 from mosh1/mbl_speed_fix
Fix z feedrate value when doing mesh bed leveling. probe feedrate use…
2016-11-23 14:15:01 -06:00
Scott Lahteine 7f8133a51f Merge pull request #5255 from Kaibob2/CaseLightMenu
Case light menu (3rd attempt)
2016-11-23 13:46:33 -06:00
Kai 0c341f0c50 Added Menu entry for Case light 2016-11-23 19:29:15 +01:00
Scott Lahteine 3bc2273ac9 Comment M540 2016-11-21 18:08:00 -06:00
Scott Lahteine 14b74181f5 Merge pull request #5179 from thinkyhead/rc_TMC2130
TMC2130 "Silent StepStick" support
2016-11-21 14:10:52 -06:00
Scott Lahteine bb2114a060 Merge pull request #5264 from thinkyhead/rc_delta_safe_zone
Add an option for delta to home to the top
2016-11-21 13:56:44 -06:00
Scott Lahteine 9b96a4a53b Merge pull request #5246 from thinkyhead/rc_some_cleanup
Minor stepper cleanup
2016-11-21 13:55:25 -06:00
Scott Lahteine 3e0376b45e Reorder M114 and M119 gcode cases 2016-11-21 00:52:19 -06:00
Scott Lahteine 127e21ae00 Extend M122 for all steppers 2016-11-21 00:52:18 -06:00
Moritz d67c1d825f Add TMC2130 support 2016-11-21 00:17:45 -06:00
Scott Lahteine 11effeee2c Add an option for delta to home to the top 2016-11-20 23:12:07 -06:00
Moshen Chan 29b174bfb9 Fix z feedrate value when doing mesh bed leveling. probe feedrate uses XY_PROBE_SPEED 2016-11-19 16:34:41 -08:00
Scott Lahteine 87b6b19256 Patch CASE_LIGHT typo 2016-11-18 23:49:12 -06:00
Scott Lahteine 181cdb3cfe Move GCode list above include lines 2016-11-18 22:24:46 -06:00
Scott Lahteine eb120e518c Followup to new endstop interrupts feature
- Fix typos, verbiage
- Fix naming of `setup_endstop_interrupts`
- Some formatting, indentation, spacing
2016-11-18 21:53:45 -06:00
Scott Lahteine 832fe284b4 Merge pull request #5184 from AnHardt/endstop_interrupts
Introduce endstop interrupts
2016-11-18 20:50:24 -06:00
Scott Lahteine 98600e1433 Minor stepper cleanup 2016-11-18 01:15:57 -06:00
Florian Heilmann d08867986e Add autotemp capabilities to M104
This allows M104 to pass the F and B parameters to enable autotemp as well
2016-11-17 11:28:19 -06:00