SunRed/Marlin-Artillery-M600
Archived
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
7699 commits 1 branch 0 tags 119 MiB
Commit graph

6384 commits

Author SHA1 Message Date
Roxy-3D
a20b7d9581 Better tuned Example file for FolgerTech i3-2020 
Also setting up Z-Probe on the machine.
 2017-04-27 11:16:38 -05:00
Kai
bf2fe46062 Update language_de.h 2017-04-27 10:13:02 +02:00
Kai
11d34be060 Update language_de.h 2017-04-27 10:06:26 +02:00
Scott Lahteine
817ecb9ff4 Merge pull request #6453 from thinkyhead/rc_cleanup_wednesday 
Minor cleanups, work-in-progress
 2017-04-26 19:41:52 -05:00
Roxy-3D
22f6e277af Get example files fully into compliance 
Change to support new name GRID_MAX_POINTS_XY
Start UBL at version 1.0 in the CUSTOM_MACHINE_NAME
 2017-04-26 16:22:17 -05:00
LVD-AC
a9bc1d30cc z_offset change 
Avoids to have to recalibrate the delta_height after a z_offset change
 2017-04-26 21:57:11 +03:00
Roxy-3D
ec26e23e7e Add my two 'Nice' machines as example configurations 
These are my two 'Nice' machines.  Both are good example machines.  The
FolgerTech i3-2020 is probably the best value kit on the market right
now.  And it has developed a 'Cult Following' of hobbiests.  I'll always
have an up to date Configuration.h file set for it, so it may as well be
an example configuration.

And the gCreate gMax 1.5+ is the best printer I've ever seen that runs
Marlin.  For sure, I'll always have up to the minute Configuration.h
files for this printer also.   I've moved over to using the gMax as my
primary development machine for Marlin.   So...  Besides being a good
machine, it is a nice convienience for me to have this Configuration.h
file as an 'Example'.
 2017-04-26 12:46:12 -05:00
Scott Lahteine
adb8e68592 Fix stuck "Print Aborted" LCD message 
Fixes #6393
 2017-04-26 06:24:23 -05:00
Scott Lahteine
096b927102 Minor optimization of FILAMENT_WIDTH_SENSOR 2017-04-26 06:24:23 -05:00
Scott Lahteine
5bdb0b567d Cosmetic patches 2017-04-26 06:24:23 -05:00
Kai
38ae7f4238 Added more translation strings 
There are some quite tricky ones which are hardly translateable.
Maybe @Sebastianv650 can review this
 2017-04-26 11:58:11 +02:00
Scott Lahteine
4d96d3eab1 Bootscreen delay after clear, then set chars 
Fixes #6426
 2017-04-25 23:37:28 -05:00
Scott Lahteine
5512130d6c Only set Compare Mode for channel A 
Fixes #6445
 2017-04-25 23:14:16 -05:00
Roxy-3D
d467e97679 Smart-Fill and Mesh-Tilting (both 3-point and grid) working! 
Also...   The memory corruption issue may be fixed.   The GCC compiler
was inlining static functions and this caused the G29() stack frame to
become much larger than the AVR could handle.
 2017-04-25 21:03:41 -05:00
Scott Lahteine
a699967ec8 Merge pull request #6443 from thinkyhead/rc_interrupt_fastio 
Patch fastio.h with Timer 2 interrupt support
 2017-04-24 20:09:41 -05:00
Scott Lahteine
2823bf0874 Update fastio.h with special handling for Timer 2 2017-04-24 16:58:22 -05:00
Scott Lahteine
fd535e111a Fix up XYZ_CONSTS_FROM_CONFIG macro 2017-04-24 14:05:11 -05:00
Kai
03c2f756b9 Update language_de.h 2017-04-24 13:32:16 +02:00
LVD-AC
dcf30a69d6 Allowing #define DELTA_TOWER_ANGLE_TRIM[C_AXIS] 
More consistent with M665 where C-value is allowed as well, then
normalized
 2017-04-23 14:51:24 +03:00
Brian
f41fb2b635 Numerous UBL-related changes: 
* relocated ubl state to config. store:
 * removed a number of ubl state variables and padding which were largely unused - saved 58 bytes of both SRAM and EEPROM;
 * modified ubl sanity_check - no longer checks removed state variables that were otherwise unused, where checking didn't seem to accomplish anything, ultimately;
 * removed pre_initialized state, saving 64 bytes of SRAM;
 * removed automatic saving of UBL state after UBL activation/deactivation;
* consolidated multiple GRID_MAX_POINTS_X/Y to 'Global Leveling' section of EEPROM;
* minor update to G29 Sx notes/instructions;
* renamed mesh load and save parameter to 'slot' from 'm' for clarity;
 2017-04-22 18:44:39 -05:00
Brian
f1a4758cef use progmem instead of sram for mesh_index_to_x/ypos array; 
fix maximum mesh_index_ array size at 16 (15+1);
 2017-04-22 18:34:49 -05:00
Scott Lahteine
87d240042a Optimize number-to-string functions, no-fan display 2017-04-22 16:23:15 -05:00
Scott Lahteine
959566cf0a Update note about M163 / M164 2017-04-22 16:23:15 -05:00
Scott Lahteine
830851df13 Spend some SRAM to optimize bilinear leveling 2017-04-22 16:19:31 -05:00
Scott Lahteine
091179d960 bed_level_grid => z_values (also *_virt array) 2017-04-22 16:19:31 -05:00
Scott Lahteine
23cdbbb2d3 Add a method to refresh bilinear bed level after a change 2017-04-22 16:19:30 -05:00
Scott Lahteine
ccda63c473 Drop the accessor form for LCD value editing 2017-04-22 16:19:30 -05:00
Scott Lahteine
10da175be5 Fix a pair of compiler complaints 2017-04-22 16:19:30 -05:00
Scott Lahteine
ff0018e287 Format hex values as uppercase 2017-04-21 21:42:41 -05:00
android444
77aa16005d Polish font 
Add polish font for GLCD displays only.
HD44780 work properly without polish character.
Update language_pl.h.
 2017-04-21 21:42:41 -05:00
teemuatlut
244f67590e Delta probe height bug solved 2017-04-22 02:23:56 +03:00
Hans Raaf
406a83ff2d Fix for Meshpositions if printer has negative endstop positions 2017-04-22 00:16:16 +02:00
benlye
3ed737425d Fix typo in new SET_COM macro 2017-04-21 15:08:18 -05:00
Brian
88649b06a6 use planner.z_fade_height, etc. instead of private, ubl-specific g29 fade height 2017-04-21 09:09:09 -05:00
LVD-AC
004928148c Tower angles 
Adding '7-point' tower angle correction calibration
 2017-04-21 12:48:45 +03:00
LVD-AC
76ec7a0f80 Adding upto 7*7 probe grids 
- adding Cn 5, 6 and 7
 2017-04-21 11:58:39 +03:00
LVD-AC
d4f593d200 Delete 'expert level' 
and getting rid off verbose level 3 and configuration_adv settings
 2017-04-21 11:58:39 +03:00
LVD-AC
13c8493878 M665 rework and related issues (all delta's) 
- Making M665 compatible with repetier (see
http://reprap.org/wiki/G_code#M665:_Set_delta_configuration)

- M665 B also sets the radius for manual calibration menu

- Converting tower ajustment definitions to arrays - tower angle
corrections compatible with Esher 3D wizzard

- Only tower angles need to be adjustable with M665 and stored to EEPROM
- tower radius and diag rod can be adjusted in the FW only with #define
 2017-04-21 11:58:39 +03:00
Scott Lahteine
e0e069c6d8 Clean up trailing whitespace 2017-04-20 17:52:07 -05:00
Scott Lahteine
9b94210394 Bring FLSUN config more up to date 2017-04-20 17:52:06 -05:00
Scott Lahteine
b0aa256bc0 Updates for all configs 2017-04-20 17:52:05 -05:00
Scott Lahteine
ee46ce1743 Add and apply interrupt helper macros 2017-04-20 16:04:29 -05:00
Scott Lahteine
6131c62499 General cleanup 2017-04-20 16:04:29 -05:00
benlye
2c86dfd3b5 Fix compiler type conversion errors after LCD changes 2017-04-20 16:04:29 -05:00
Scott Lahteine
55f9e76610 Merge pull request #6367 from thinkyhead/rc_cleanup_followup 
Cleanup after some direct commits
 2017-04-20 15:13:24 -05:00
Scott Lahteine
d38a792a91 Merge pull request #6382 from MagoKimbra/fix_configuration_store 
Fix double definition in configuration_store
 2017-04-20 15:06:58 -05:00
Scott Lahteine
b98bc034ae Replace c_assert hack with static_assert 2017-04-19 13:07:35 -05:00
Scott Lahteine
5eb2b1a790 Clear up G29 compiler warnings 2017-04-19 13:07:35 -05:00
Scott Lahteine
4ce2a63db0 Apply const, spacing to Marlin_main.cpp 2017-04-19 13:07:34 -05:00
Scott Lahteine
e97f1284c1 Cleanup of pins testing code 2017-04-19 13:07:34 -05:00
Scott Lahteine
e9b53ae00c Cleanup after some direct commits 
https://github.com/MarlinFirmware/Marlin/commit/5e9726530ff21d3bc62beaa6
ac1b9437c276130a
 2017-04-19 13:07:34 -05:00
Scott Lahteine
e05d050a1e Add hex routine to print an address 2017-04-19 13:07:34 -05:00
Scott Lahteine
4542282f5e Fix broken TOGGLE macro in fastio.h 2017-04-19 12:38:13 -05:00
MagoKimbra
ed52275a14 Fix double definition in configuration_store 2017-04-18 17:57:40 +02:00
Scott Lahteine
de569e3d4e Merge pull request #6327 from Bob-the-Kuhn/M43-toggle-&-Z-probe-fixes 
M43 Toggle & Z servo test - fix bug & add another check
 2017-04-18 03:21:57 -05:00
Scott Lahteine
f33a650ecc Merge pull request #6368 from thinkyhead/rc_linear_advance_eeprom 
Add Linear Advance values to EEPROM and LCD
 2017-04-18 02:54:12 -05:00
Scott Lahteine
a00ae4790a Replace M905 with unique code M900 2017-04-17 16:39:37 -05:00
Scott Lahteine
1286d9603d Clean up and organize ultralcd.cpp 2017-04-17 16:39:36 -05:00
Scott Lahteine
3cdf78a79f MSG_VOLUMETRIC => MSG_FILAMENT 2017-04-17 16:39:36 -05:00
Thomas Moore
f8e77d6545 Add Linear Advance values to EEPROM and enable configuration of K via LCD 2017-04-17 16:39:36 -05:00
Scott Lahteine
eb2d073dae Add M905 R for setting the E/D ratio directly 2017-04-17 16:39:36 -05:00
Scott Lahteine
69dfa54a84 Use code_value_linear_units for known-linear axes 2017-04-17 16:39:36 -05:00
Scott Lahteine
b956f2642b Show M503 report with current linear units 2017-04-17 16:39:36 -05:00
Scott Lahteine
ba4a005ceb Merge pull request #6373 from mtowara/mt_makefile_fix 
Fix Makefile build
 2017-04-17 16:16:37 -05:00
towara
150b15c311 fix compiler errors generated by more stringent flags in Makefile: 
- use volatile for registers
- avoid implicit casts
 2017-04-17 11:59:47 +02:00
towara
f6095c9325 fix missing serial.cpp in Makefile 2017-04-17 11:59:03 +02:00
Scott Lahteine
871f92378c Tweak headings in EEPROM structure 2017-04-16 18:42:33 -05:00
Scott Lahteine
bf2548be4a Merge pull request #6362 from tcm0116/babystepping 
Only queue babysteps if axis is in a known position
 2017-04-16 17:46:06 -05:00
dot-bob
9c410ddf68 Fixed an issue where a display with a hardware reset pin (LCD_RESET) may not get initialized properly. 2017-04-15 22:45:15 -06:00
Thomas Moore
72a7fac461 Only queue babysteps if axis is in a known position 2017-04-15 23:19:43 -05:00
Roxy-3D
5e9726530f Setup to find data corruption and general clean up 
This data corruption problem is very difficult.  Just changing the code
a little bit changes whether the problem even happens and what is
affected.  I need these changes in the main branch so I can operate with
the extra debug code always available and turned on.

Everything is setup such that if M100 is turned off or DEBUG(ECHO) is
turned off, the code is not affected.   M100 has been made a little bit
more inteligent so it can display the serial command buffers in a more
meaningful way (because the data corruption seems to often times end up
in that area).
 2017-04-15 19:26:43 -05:00
Scott Lahteine
e519e95953 Merge pull request #6358 from thinkyhead/rc_doubleclick_fix 
Show Cancel/Continue screen for ABL "Level Bed"
 2017-04-15 17:25:37 -05:00
Scott Lahteine
a81606c680 Show Cancel/Continue screen for ABL "Level Bed" 2017-04-15 16:51:03 -05:00
Scott Lahteine
51021bc7b8 Merge pull request #6353 from thinkyhead/rc_endstop_coolness 
Clean up endstop triggering code
 2017-04-15 16:49:54 -05:00
Scott Lahteine
857dec0990 Merge pull request #6342 from benlye/benlye-fix-softspi 
Fix softspi variant conditional for 1284p
 2017-04-15 16:33:50 -05:00
Scott Lahteine
4e04383d18 Merge pull request #6354 from thinkyhead/rc_doubleclick_fix 
Fix undefined symbol if DOUBLECLICK_FOR_Z_BABYSTEPPING and HAS_BED_PROBE defined
 2017-04-15 16:06:29 -05:00
Thomas Moore
8dd0492e68 Show lcd_babystep_zoffset screen if DOUBLECLICK_FOR_Z_BABYSTEPPING is enabled and HAS_BED_PROBE is defined 2017-04-15 14:44:50 -05:00
benlye
0a2f60fab4 Make spi.h inclusion conditional 
spi.h is only needed if HEATER_0_USES_MAX6675 is defined, so making its inclusion conditional on HEATER_0_USES_MAX6675 being defined.
 2017-04-15 16:22:42 +01:00
Bob-the-Kuhn
60471b7592 minor improvements 
Configuration_store.cpp - changed a couple of print statements so the
values were printed.  The old method resulted in the formula being
printed.

ubl_G29
1) added support for R option to P4.  Now probes all points unless R is
present and the number is greater than 0.

2) P2 - moved map print statement so it showed the point that was
currently being probed,  The old location did this only for the first
point.

3) P4 - Moved the map print for the same reason.

ultralcd.cpp - changed "Mesh Editor :" to "Mesh Editor" because the LCD
draw routine puts a ":" in automatically so you end up with an extra ":"
using the old message.
 2017-04-15 09:31:55 -05:00
Scott Lahteine
25a61e9061 Improve motion-based endstop triggering code 2017-04-15 06:16:50 -05:00
Scott Lahteine
a2356c2825 Fix compiler warning about z-offset callback 2017-04-15 02:50:27 -05:00
Scott Lahteine
037c964d26 Reverse bools on prepare_move sub-functions 2017-04-15 01:08:19 -05:00
Scott Lahteine
d9c4333806 Extra logging of Dual X modes 2017-04-15 01:08:19 -05:00
Scott Lahteine
4067d15c92 Cleanup, extend TMC2130 implementation 2017-04-14 23:00:00 -05:00
Scott Lahteine
d60c02c5b1 Cleanup, extend TMC2130 configuration 2017-04-14 22:43:56 -05:00
Scott Lahteine
0e97b3d6d0 Fix some configuration spacing 2017-04-14 22:36:10 -05:00
Scott Lahteine
cf6f483378 Merge pull request #6187 from thinkyhead/rc_flsun_delta_autocal 
Delta: DELTA_HEIGHT, G33 Auto-Calibrate, drop M206/M428, add M665 H
 2017-04-14 22:32:12 -05:00
Scott Lahteine
24882adfbf Allow NO_WORKSPACE_OFFSETS with DELTA_AUTO_CALIBRATION 
- On `DELTA` the `M665 H` option supplants `M206`
- On `DELTA` `NO_WORKSPACE_OFFSETS` only reverts `G92` behavior
- Spawn 4 conditionals based on `NO_WORKSPACE_OFFSETS`
- Optimize coordinate space conversion for `DELTA` workspace
- To keep EEPROM version, retain `home_offset[XYZ]`, just ignore XY
 2017-04-14 21:56:49 -05:00
Bob-the-Kuhn
1acb84ba02 fix 1 bug, add error messages 
===============================================

make changes requested by reviewers

===============================================

add M43 test to Travis, fix EOL, remove trailing spaces
 2017-04-14 20:57:45 -05:00
LVD-AC
8821963873 Implement delta auto-calibration and delta_height 2017-04-14 19:46:31 -05:00
Scott Lahteine
b305699046 Merge pull request #6341 from benlye/benlye-lcd_babystep_zoffset 
Fix lcd_babystep_zoffset()
 2017-04-14 19:11:46 -05:00
LVD-AC
03bda24d19 Add delta auto-calibration and configuration for Flsun AC 2017-04-14 19:08:14 -05:00
Scott Lahteine
1bd25fd2b3 Clean up config spacing, section headings, etc. 2017-04-14 19:06:31 -05:00
Scott Lahteine
153b0ae967 Tweak Delta Printer configuration note 2017-04-14 19:06:06 -05:00
Scott Lahteine
81ffd98dd9 Allow faux leveling 2017-04-14 19:06:06 -05:00
Scott Lahteine
2355d87e11 Merge pull request #6346 from thinkyhead/rc_broken_abl_test 
Add support for SOLENOID_PROBE
 2017-04-14 18:36:32 -05:00
Scott Lahteine
f4685c28b7 Reorder Conditionals_post.h and add comments 2017-04-14 18:18:21 -05:00
Scott Lahteine
0ac2b5c045 Additional 5 extruders support (solenoids, microstepping) 2017-04-14 18:18:20 -05:00
Scott Lahteine
fd2a0784ba Add support for SOLENOID_PROBE 2017-04-14 17:24:36 -05:00
Scott Lahteine
5803ba43a9 Expose EXT_SOLENOID as an advanced option 2017-04-14 17:24:36 -05:00
Scott Lahteine
ea734f910b Use direct pin manipulation whenever possible 2017-04-14 16:55:35 -05:00
Scott Lahteine
19d0c6a0c0 Patch to init W with RGBW_LED 2017-04-14 16:55:23 -05:00
Scott Lahteine
3e079660b0 Never define SLED_PIN 2017-04-14 16:36:32 -05:00
benlye
1a447d0047 Fix variant conditional for 1284p 2017-04-14 18:46:09 +01:00
benlye
1f9ee42750 Fix lcd_babystep_zoffset() 
Resolve 'steps_to_mm was not declared in this scope' compilation error after recent changes to merge babystepping with M851
 2017-04-14 18:38:35 +01:00
Bob-the-Kuhn
445d39e95a CORExx endstop detection fixes 
1. The CORExx printers were checking more endstop axis than needed.

2. Removed all the CORE_xx_NOT logic.  The motor_direction(xx) routine
always returns the correct data so it is not needed.  It was actually
cause the wrong direction to be checked in some cases.

3. Made the logic/defines for X, Y & Z axis all the same.  The old logic
checked inappropriate configurations for Y and didn't check all the
correct configurations on Z.

4. Added a check for zero steps before the X, Y & Z axis.  Previously
would check the they axis even if there were no movement.
 2017-04-13 21:43:37 -05:00
Roxy-3D
28fec61f92 M100 Fixes and Features 
All the memory accesses need to be unsigned char in  order to avoid
false errors being detected.   Two new features are available for
developers to call into the M100 functionality to look for data
corruption.
 2017-04-13 18:20:53 -05:00
Scott Lahteine
52c3ace102 Add BABYSTEP_ZPROBE_OFFSET as an optional feature 2017-04-13 16:29:43 -05:00
Scott Lahteine
cd4e6abec8 Group BABYSTEPPING options together 2017-04-13 16:26:45 -05:00
Scott Lahteine
60ac41a32c Add code to handle changes to zprobe_zoffset 2017-04-13 15:46:35 -05:00
Scott Lahteine
8fa4209916 Movement/adjustment should be reverse of probe offset change 2017-04-13 15:46:05 -05:00
Thomas Moore
361655828f Use babystepping to adjust bed probe z-offset 2017-04-13 15:46:05 -05:00
Scott Lahteine
36e5c7c389 Merge pull request #6330 from thinkyhead/rc_improvements 
Sanity check per-axis options' array sizes
 2017-04-13 13:08:44 -05:00
Scott Lahteine
02fca543bb Merge pull request #6272 from thinkyhead/rc_adc_variable_rate 
Make ADC sensor reading frequency adjustable
 2017-04-13 12:49:31 -05:00
Scott Lahteine
34308368c0 Sanity check per-axis settings for size 2017-04-13 11:35:20 -05:00
Scott Lahteine
ac96ae89f9 Apply const in Stepper::isr 2017-04-13 06:20:36 -05:00
Scott Lahteine
2fa1e882d0 Merge pull request #6325 from thinkyhead/rc_M20_with_size 
Simplified M20 with size
 2017-04-13 05:06:52 -05:00
Bob-the-Kuhn
1b12fea0fa simplified M20 with size 2017-04-13 04:56:58 -05:00
Scott Lahteine
4022b971db Merge pull request #6315 from thinkyhead/rc_unify_M421 
Unify M421
 2017-04-12 19:43:28 -05:00
Scott Lahteine
b236562354 Merge pull request #6306 from thinkyhead/cleanup_after_6302 
Adjustments to M100
 2017-04-12 19:12:27 -05:00
Scott Lahteine
5e4f4d387f Swap MBL z_values dimensions to [X][Y] 2017-04-12 17:24:05 -05:00
Scott Lahteine
063f641651 Unify M421 2017-04-11 15:46:13 -05:00
Scott Lahteine
6d5400dc31 Merge pull request #6240 from thinkyhead/rebuild_rgb_led 
Extend RGB LED with Printer Events
 2017-04-11 15:16:57 -05:00
Scott Lahteine
dac21ec680 Add support for an RGBW LED 2017-04-11 12:58:55 -05:00
Scott Lahteine
e7746ffee4 Extend RGB LED support, adding Printer Events 2017-04-11 12:15:41 -05:00
Scott Lahteine
c7063eb55c theTarget => target_temp 2017-04-11 12:15:41 -05:00
Scott Lahteine
36bda2bade Add HAS_RESUME_CONTINUE shorthand macro 2017-04-11 12:15:40 -05:00
Scott Lahteine
53e6c33c37 2 is DXC_DUPLICATION_MODE 2017-04-11 12:15:40 -05:00
Scott Lahteine
a2cb0a3d54 Use multiply for delta probe constraint 2017-04-11 12:15:40 -05:00
Scott Lahteine
6487c96a4a Merge pull request #6313 from Kaibob2/patch-10 
Allow 10mm Movements for Z-Axis
 2017-04-11 12:04:10 -05:00
Kai
001bc14255 Allow 10mm Movements for Z-Axis 
I use the movement options via LCD quite often. Especially to get the nozzle out of the way. I see no reason, why the 10mm option is disabled for the Z-Axis, this is why i always delete this line when i compile a new version.
If this is unwanted, please just close this PR
 2017-04-11 18:39:26 +02:00
Scott Lahteine
6a9b008044 Fix MINIMUM_STEPPER_PULSE maths 2017-04-11 11:11:17 -05:00
Scott Lahteine
68773f4486 Simplify stepper macros by renaming enable/disable macros 2017-04-11 11:10:26 -05:00
Scott Lahteine
e02a5a6371 Add macros for delays by machine cycle 2017-04-11 09:18:32 -05:00
Scott Lahteine
ecc537015a Have M109 / M190 do nothing with no parameters 2017-04-11 05:06:25 -05:00
Scott Lahteine
03aa9a390e Apply coding standards to M100, break up into functions 2017-04-10 21:09:43 -05:00
Scott Lahteine
48c16fc6ef Merge pull request #6307 from thinkyhead/rc_less_no_reentrance 
Only lcd_synchronize needs no_reentry
 2017-04-10 20:58:32 -05:00
Scott Lahteine
4fcfe926d6 Only lcd_synchronize needs no_reentry 2017-04-10 20:13:23 -05:00
Scott Lahteine
67fb7f82ac Merge pull request #6283 from thinkyhead/rc_eeprom_z_fade 
Save / restore z_fade_height in EEPROM
 2017-04-10 20:05:20 -05:00
Scott Lahteine
eff5af569b Merge pull request #6300 from MagoKimbra/rc_fix_mesh_report 
Fix mbl_mesh_report
 2017-04-10 19:37:19 -05:00
Scott Lahteine
4a18968c10 Merge pull request #6297 from Kaibob2/patch-9 
Fix EPROM -> EEPROM
 2017-04-10 19:35:30 -05:00
Roxy-3D
ba85faabc0 Fix M100 Free Memory Checker 
M100 had numerious changes and quit working.   Part of the problem is
the overloading of the SERIAL_PROTOCOL functions.   Also, some of the
address arithmatic was changed to use char *ptr and passing ptr into the
SERIAL_PROTOCOL functions caused them to try to print a string instead
of a number.     M100 is working again.   Let's keep it that way!

M100 has been expanded to now have a function  int
free_memory_is_corrupted()  that can be called from other code to see if
the free space is still contiguous.  It may make sense to add a flag to
control its verbose nature but right now, the extra chit chat is very
helpful to know int free_memory_is_corrupted()  is doing the right thing
and what it found at various points when it was called.     A 'Show &
Tell' is coming up with int free_memory_is_corrupted().
 2017-04-10 15:33:55 -05:00
Kai
3b82db5fe9 Missing semicolon in ultralcd.cpp 
When PARK_HEAD_ON_PAUSE is defined Marlin won't compile because of two missing semicolon.
 2017-04-10 14:45:51 -05:00
MagoKimbra
7d2e637867 Fix mbl_mesh_report 2017-04-10 20:50:19 +02:00
Kai
afeb0452ef Fix EPROM -> EEPROM 
These fixes are neede because before it showed the englisch text even if language = de was selected
 2017-04-10 18:37:00 +02:00
Scott Lahteine
7f950a80c0 Make ADC sensor reading frequency adjustable 2017-04-09 22:18:21 -05:00
Scott Lahteine
786af73e24 Convert config code to a static class 2017-04-09 22:06:41 -05:00
james94jeans2
5b9476fe78 Added z_fade_height to EEPROM-Settings 
Firmware was forgetting the z_fade_height in Planner, set by M420 Z<f>,
after each reset or loading settings from EEPROM. Added the float
z_fade_height to EEPROM-Storage, now remembers the value.
 2017-04-09 21:16:58 -05:00
Scott Lahteine
9343f6a95f Put TOSHIBA with other stepper driver options 2017-04-09 20:52:49 -05:00
Scott Lahteine
7a704af5e6 Merge pull request #6284 from thinkyhead/rc_wt150_rebase 
wt150 (Mightyboard Rev E) & RRD Full Graphic Smart Controller
 2017-04-09 20:27:44 -05:00
Max Matveev
2031fb913b Fixed comparison of float values to NaN 2017-04-09 20:28:46 +02:00
Scott Lahteine
e48a52a530 Patch a display issue with LCD_DECIMAL_SMALL_XY 
The `ftostr4sign` function got munged by the `WITHIN` patch
 2017-04-09 10:25:35 -05:00
Scott Lahteine
1a3cd6a090 Merge pull request #6213 from thinkyhead/rc_gitattributes 
Init bed_level_virt_interpolate on EEPROM load
 2017-04-09 08:13:11 -05:00
Scott Lahteine
314a02e2d5 Toggle with XOR 2017-04-09 07:58:47 -05:00
Scott Lahteine
8bc0d90b00 Init bed_level_virt_interpolate on EEPROM load 2017-04-09 07:04:20 -05:00
MD
20dd5376b8 Cheaptronic V2 
Add support for new electronics
www.reprapobchod.cz
 2017-04-09 06:57:43 -05:00
Scott Lahteine
4cdda5615b Bring other configs up to date with wt150 changes 2017-04-09 06:45:42 -05:00
Paweł Stawicki
9b0885f4f6 Allow boards without a thermistor 2017-04-09 06:45:41 -05:00
Paweł Stawicki
64cfcebe66 Update SlowSoftI2CMaster link. MightyBoard digipots I2C bus has no resistors. 2017-04-09 06:45:03 -05:00
Paweł Stawicki
0eb16d9ff7 Add example config for the wt150 printer with RepRapDiscount Full Graphic Smart Controller 2017-04-09 06:44:54 -05:00
Paweł Stawicki
652bedfa18 Add RepRapDiscount Full Graphic Smart Controller support to MIGHTYBOARD REVE 2017-04-09 06:44:53 -05:00
Paweł Stawicki
44cdebb8f1 Add software spi support for max6675 2017-04-09 06:44:53 -05:00
Paweł Stawicki
191fec009f Add digipot i2c control for MCP4018 2017-04-09 06:44:53 -05:00
Scott Lahteine
e5b16081cb Update TinyBoy2 configurations 2017-04-09 06:44:53 -05:00
Scott Lahteine
1855534f20 Config files cleanup 2017-04-09 06:44:52 -05:00
Scott Lahteine
c26a315d0b Additional missed patches 2017-04-09 04:24:23 -05:00
Scott Lahteine
39617e10b8 Patch configs comment formatting 2017-04-09 03:49:16 -05:00
Scott Lahteine
c54f6cf23d Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
Scott Lahteine
2b88ccd0aa Apply UBL mesh bounds to remaining configs 2017-04-09 03:49:15 -05:00
Scott Lahteine
60be3d264b Macros to print floats, hiding imprecision 2017-04-09 03:48:40 -05:00
Scott Lahteine
b356d73239 Merge pull request #6278 from thinkyhead/pr_delta_angles 
Followup to additional delta trim options
 2017-04-08 22:25:57 -05:00
Jimmy Envall
f78d44e91a Added support for delta tower angle corrections. 2017-04-08 21:13:44 -05:00
Scott Lahteine
d3b4d84586 Merge pull request #6277 from thinkyhead/pr_roxy3d_rcbugfix 
Unify UBL Command Parsing
 2017-04-08 20:17:46 -05:00
Scott Lahteine
d4ce839351 Cleanup following Pins Debug update 2017-04-08 18:59:57 -05:00
Scott Lahteine
c7a8f7970b Formatting / cleanup 2017-04-08 18:59:57 -05:00
Scott Lahteine
29d4ec8257 Support 5 extruder auto fans 2017-04-08 18:59:57 -05:00
Scott Lahteine
824f3c1c0d Fix up configuration comments 2017-04-08 18:59:56 -05:00
Scott Lahteine
995ed90248 Clean up Filament Width Sensor comments 2017-04-08 18:59:56 -05:00
Scott Lahteine
5a7b810fdd General comment cleanup 2017-04-08 18:58:33 -05:00
Scott Lahteine
0027c22839 Drop extraneous calls to lcd_update 2017-04-08 18:58:33 -05:00
Scott Lahteine
d6db7a9b03 patch "step_remaining" 2017-04-08 18:13:20 -05:00
Scott Lahteine
cbc2331187 Use LCD_MESSAGEPGM over lcd_setstatuspgm 2017-04-08 18:04:39 -05:00
Scott Lahteine
3729510b1e Set and check main parameter values, report all errors 2017-04-08 17:15:55 -05:00
Roxy-3D
34d3ed9ab1 These items were removed from the UBL Command Parsing 
Having these items randomly (and errorniously) disappear cost me several
hours of work yesterday.
 2017-04-08 15:30:20 -05:00
Scott Lahteine
15edb41cee Patches to UBL 2017-04-08 14:59:14 -05:00
Roxy-3D
14cf527bb8 Getting setup for debugging 2017-04-08 14:59:14 -05:00
Scott Lahteine
f8408036f2 Merge pull request #6264 from thinkyhead/rc_five_extruders 
Support up to 5 extruders in Marlin
 2017-04-07 12:48:56 -05:00
Bob-the-Kuhn
f7fc49c3a3 Finish name change 
DAC_STEPPER_DFLT wasn't changed to DAC_MOTOR_CURRENT_DEFAULT in all
places on PR #6124
 2017-04-07 11:05:24 -05:00
Scott Lahteine
832064e4f2 Implementation changes to support 5 extruders 2017-04-07 10:46:37 -05:00
Scott Lahteine
04050237f0 Header and pins changes to support 5 extruders 2017-04-07 10:46:36 -05:00
Scott Lahteine
2a84122edd Configuration changes to support 5 extruders 2017-04-07 10:46:35 -05:00
Scott Lahteine
edf18977c1 Patch pins files hotends/e-steppers sanity check 2017-04-07 10:46:33 -05:00
Scott Lahteine
dc84678fc1 Fix HOTEND_STATUS_ITEM for graphical display 2017-04-06 23:07:30 -05:00
Scott Lahteine
a0de5d94e2 Merge pull request #6258 from benlye/benlye-bilinearfix2 
Better fix for bilinear Z offset and G29 Z (update to #6251)
 2017-04-06 20:51:57 -05:00
Scott Lahteine
b23aef5b8d Merge pull request #6190 from Bob-the-Kuhn/Stop-and-Kill-prints---round-2 
Message for every KILL and STOP (also need delays)
 2017-04-06 20:40:12 -05:00
Roxy-3D
945303c0d5 eleminate bootscreen.h 2017-04-06 19:55:41 -05:00
Roxy-3D
ef3da3971e Update ubl.h 2017-04-06 19:55:41 -05:00
Roxy-3D
8644dc170b get synchronized to current file names 2017-04-06 19:55:41 -05:00
Roxy-3D
1451b7eacf UBL's Grid Based Leveling code 
Pretty much...  The code is in place.  Still more work to do.    But it
has a lot of hooks and variables in other code, so commit and merge
before I pick up a million 'Conflicts'.
 2017-04-06 19:55:41 -05:00
Bob-the-Kuhn
549055f20c Merge pull request #6124 from Bob-the-Kuhn/MCP4728-consistency 
MCP4728 consistency & fix ultralcd.cpp (PRINTRBOARD Rev F and RIGIDBOARD V2)
 2017-04-06 16:35:50 -05:00