Commit graph

739 commits

Author SHA1 Message Date
Yuri Valentini
86358dd6cd Panelolu pin assignment for sanguinololu from http://reprap.org/wiki/Panelolu 2013-01-10 12:23:20 +01:00
daid
6ec56fa923 Merge pull request #334 from KevinOConnor/FanKick
Add feature to briefly run the cooling fan at full speed when it first starts.
2013-01-09 02:47:59 -08:00
daid
965baf2683 Merge pull request #362 from daid/Marlin_v1
Finnish language
2013-01-09 02:42:09 -08:00
daid
4fde836d83 Merge pull request #8 from randomev/Marlin_v1
+ Finnish translation
2013-01-09 02:39:43 -08:00
Kevin O'Connor
3d91bd486c Add "kick fan" feature - briefly run fan at full speed on start.
Add a feature to run the cooling fan at full speed for a small period
(default 100ms) when first starting the fan.  Some fans wont reliably
start spinning at low power, and many fans have issue with the PWM at
low power.  However, once the fan starts spinning it can reliably be
set to a wide range of PWM values.
2013-01-08 18:50:15 -05:00
Kevin O'Connor
3f2f94ef28 Be consistent in setting of the fan PWM.
Always set the FAN PWM value in check_axes_activity() and always use
the value of the active move if a move is active.
2013-01-08 18:49:18 -05:00
Henry Palonen
7f30039d2a + Finnish translation 2013-01-08 19:21:34 +02:00
daid303
14e1d495ef Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1 2013-01-08 17:10:30 +01:00
daid303
bbe7d3d0fe Fixed #312 2013-01-08 17:09:57 +01:00
daid
7ce509b9a7 Merge pull request #361 from yuroller/MakefileSanguino
Makefile sanguino
2013-01-08 06:22:27 -08:00
Yuri Valentini
9c34c4f05b fixes for ramps compilation using installed arduino ide 2013-01-08 12:54:31 +01:00
daid303
442ade15a6 Move Gen6 stuff into a proper location. 2013-01-08 12:31:28 +01:00
daid
5fd4582cc8 Merge pull request #242 from Drakelive/Marlin_v1
Fixes issues # 216 and # 135 for Gen6 and Gen6 Deluxe board
2013-01-08 03:29:20 -08:00
daid303
8b88e3b386 Fixed #345, Fixed #267. 2013-01-08 12:14:55 +01:00
daid
27843388c6 Merge pull request #360 from njprossi/Marlin_v1
Power signal control definitions for other power supplies
2013-01-08 02:58:02 -08:00
daid303
bfa5bb86e4 Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1 2013-01-08 11:54:13 +01:00
daid303
921273baa0 Added optional feature to stop printing when an endstop is hit. Made the Z display on the LCD in 3.2 format instead of 3.1. Added LCD message when and endstop is hit. 2013-01-08 11:53:18 +01:00
Yuri Valentini
7d20ec706e Added libraries from Arduino 1.0.3 for sanguino build 2013-01-07 17:26:50 +01:00
Nicolas Rossi
437eb3bafc Initialize PS_ON at startup 2013-01-07 14:57:51 +01:00
Nicolas Rossi
f3c1fc70a9 Power signal control definitions for ATX and others 2013-01-07 14:33:30 +01:00
Yuri Valentini
dad7691df9 makefile for sanguino standalone compilation 2013-01-07 11:08:10 +01:00
daid
3a1cd30ce1 Merge pull request #358 from yuroller/sanguino_spi
Definitions for Sanguino SPI
2013-01-04 11:53:10 -08:00
Yuri Valentini
69582042d7 Definitions for Sanguino SPI 2013-01-04 18:32:08 +01:00
daid303
5e3873c8db Add german MSG_RESUMING. 2012-12-25 20:53:11 +01:00
daid303
01aac2a142 Small changes on the LCD panel, let the speed control work better, line up the parameter edit the same as the menu, remove some unused defines, and remove the Z from the 10mm move menu. 2012-12-21 16:14:47 +01:00
daid303
b69cb9fbd9 Change the end of SD cart print message from minutes/seconds to hours/minutes. 2012-12-19 12:26:40 +01:00
daid
30254e3388 Merge pull request #350 from jcrocholl/Marlin_v1
Automatically set *_MIN_PIN and *_MAX_PIN according to *_HOME_DIR.
2012-12-17 02:16:31 -08:00
daid303
38ee395ac7 Replace the 1ms delay for 2 nops to get a 100ns delay. #259 2012-12-17 11:12:11 +01:00
daid303
5df5e4c4a2 Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1 2012-12-17 11:09:18 +01:00
daid303
a95dcd74e7 Fix some of the duplicated PSTRs, saving 500bytes of flash with LCD on. 2012-12-17 11:09:09 +01:00
daid
ab318beaaf Merge pull request #348 from oni303/Marlin_v1
fixed  (#328) pwm generation at pin D12 and D13
2012-12-17 02:08:28 -08:00
Johann Rocholl
8caf5d252d Remove bogus blank line. 2012-12-16 12:50:20 -08:00
Johann Rocholl
b39f5d614a For boards with only one endstop per axis, automatically set *_MIN_PIN and *_MAX_PIN according to *_HOME_DIR. 2012-12-16 12:09:53 -08:00
oni303
ab09fa4bbf fixed pwm generation at pin D12 and D13 when one of them is used as FAN_PIN on Sanguino, added soft pwm entry for FAN_PIN in temperature.cpp 2012-12-16 01:36:57 +01:00
daid
83ea7dc5b9 Merge pull request #342 from setar/Marlin_v1
Fix the russian translation.
2012-12-14 05:04:41 -08:00
Sergey Taranenko
5697451c72 fix lcd class 2012-12-14 15:39:47 +04:00
Sergey Taranenko
58e806f3fa Fix the russial translation. 2012-12-14 15:39:26 +04:00
Sergey Taranenko
50a5ce1dc4 deduplicate messages 2012-12-14 15:37:05 +04:00
daid303
6123a00e64 Fix the german translation. 2012-12-14 11:11:02 +01:00
daid303
7c21716886 Fixed #341 2012-12-14 10:53:11 +01:00
daid303
ae1bc83350 Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1 2012-12-13 13:25:22 +01:00
daid303
596a7e1904 Fix compiling for Arduin < 1.0.0 2012-12-13 13:24:55 +01:00
Daid
b264317fa0 Reverted the patch by KevinOConnor, as it crashes some versions of avr-gcc and caused linking issues. 2012-12-13 12:19:12 +01:00
Daid
673577a31b Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1 2012-12-13 11:41:34 +01:00
Daid
23022f1a82 Updates to Makefile to compile for Teensy. 2012-12-13 11:41:27 +01:00
daid
96e9db8919 Merge pull request #339 from KevinOConnor/CompilerFlags
Add additional optimization flags to Makefile
2012-12-13 01:30:17 -08:00
daid303
08356361ac Fixing a problem with heated beds not working without PID and BED_LIMIT_SWITCHING 2012-12-13 10:25:29 +01:00
daid303
047d037f8c #ifdef fix for #326 2012-12-13 09:04:41 +01:00
Kevin O'Connor
0908458381 Use gcc "-fwhole-program" optimization.
Use "whole program" and "link time optimization" features of gcc.  The
whole-program optimization enables the compiler to evaluate the entire
firmware for optimization instead of just one code file at a time.
This leads to better overall optimizations.
2012-12-12 23:22:35 -05:00
Kevin O'Connor
16fbb455ef Use linker "--relax" option.
The "relax" option enables the linker to convert certain "call"
instructions to the smaller "rcall" instruction.  This reduces the
size of the resulting binary.
2012-12-12 23:22:31 -05:00