Scott Lahteine
52fcc743ab
Replace "target" with "destination" in M600 (PR#2374)
...
- Also fix a bug in `M600` where `Z_MAX_ENDSTOP_INVERTING` is being
used as the index into the `destination[AxisEnum]` array.
2015-07-04 05:55:25 -05:00
Scott Lahteine
a5033c3652
Enable LCD_PIN_RESET if it exists (PR#2375)
2015-07-04 05:53:22 -05:00
AnHardt
23c8c5348f
Z-height fix V2b (PR#2351)
...
here the other two occurences of `Z_PROBE_OFFSET_FROM_EXTRUDER` are
replaced with `zprobe_zoffset`.
2015-07-02 20:30:40 -05:00
Todd Swindoll
a111fbbd0a
z-probe offset fix (PR#2361)
...
verified via 1.0.2 tag that compiles by multiple people,
credit for the fix goes to paulusjacobus for the initial find and
sniffle for the correction so M851 works.
2015-07-02 20:28:07 -05:00
AnHardt
dae4eb36ad
Add MagoKimbra to the list of contributors (PR#2356)
...
in Development
2015-06-30 08:23:38 -05:00
AnHardt
2c1414f81f
Reactivate tests for more extruders in Travis (PR#2348)
...
BOARD_ULTIMAKER was not the default any more
- sed failed to change the board
- RAMPS_EFB has no second extruder
- ...
- Added test for bed
Rebased.
2015-06-29 09:30:33 -05:00
Richard Wackerbarth
316469e76a
Clean up comments and spacing
2015-06-28 08:22:29 -05:00
Scott Lahteine
42465ee444
Cleanup of comments & spacing
2015-06-28 08:20:28 -05:00
Scott Lahteine
9682ed455e
Fix comment on M83, add comment to prepare_move
2015-06-28 08:20:19 -05:00
Richard Wackerbarth
8c760f1c31
Modify Travis build to use IDE 1.6.4
2015-06-27 16:51:42 -05:00
Richard Wackerbarth
cfb416fda9
Merge branch 'PrepareForIDE1.6' (PR#2306)
2015-06-27 15:49:12 -05:00
Richard Wackerbarth
9643e6c744
Make the platform.local a bit more generic
2015-06-27 15:45:25 -05:00
Richard Wackerbarth
4683645036
Vendor (Marlin) files
2015-06-27 15:45:25 -05:00
Richard Wackerbarth
efd5658e32
library - SPI
2015-06-27 15:45:25 -05:00
Richard Wackerbarth
9b13e60e38
core - AT90USB…
2015-06-27 15:45:25 -05:00
Richard Wackerbarth
907032616e
core - arduino
2015-06-27 15:45:25 -05:00
Richard Wackerbarth
e2f2458928
library - Liquid Crystal
2015-06-27 15:45:24 -05:00
Richard Wackerbarth
d8785ffc6f
library - TMC26x Stepper
2015-06-27 15:45:24 -05:00
Richard Wackerbarth
ae9de515b8
library - L6470
2015-06-27 15:45:24 -05:00
Richard Wackerbarth
363d7c505f
library - Wire
2015-06-27 15:45:24 -05:00
Richard Wackerbarth
7592bb1f2f
library - U8glib upgrade to v1.17
2015-06-27 15:45:24 -05:00
Richard Wackerbarth
deea00dde3
library - U8glib
2015-06-27 15:45:23 -05:00
Richard Wackerbarth
1fd335b702
Bootloaders
2015-06-27 15:45:22 -05:00
Richard Wackerbarth
bf629cf7b1
Have Travis Get additional information from the git repository
...
Travis builds from a detached head.
We need to use the current branch so that versioning works properly
2015-06-27 15:45:22 -05:00
Scott Lahteine
bb44fe17cf
Fix typo in buzzer.h endif (PR#2337)
2015-06-27 06:10:19 -05:00
AnHardt
36746143a1
Correct output of M48 (PR#2336)
...
n_samples is an uint8_t .
Got printouts like:
50 of 2 ...
2015-06-27 06:08:40 -05:00
Richard Wackerbarth
47b78ed1af
Merge Implement M110 (PR#2327)
2015-06-26 18:15:09 -05:00
Scott Lahteine
f6ca5a8da8
Allow "M110 N123" without a checksum
2015-06-26 18:13:54 -05:00
Scott Lahteine
aaad65ff5d
Include a comment documenting M110
2015-06-26 18:13:54 -05:00
Scott Lahteine
862c72b030
Put the mandatory test of gcode_N first
2015-06-26 18:13:54 -05:00
Scott Lahteine
30976f9773
Allow M110 to handle a second N argument
2015-06-26 18:13:53 -05:00
Scott Lahteine
d135b15bb8
Init all endstop bits to 0 (PR#2332)
2015-06-26 07:10:22 -05:00
Richard Wackerbarth
e09abb1b31
Merge Fix M600 (PR#2301)
2015-06-25 20:45:55 -05:00
Scott Lahteine
5ccb1c9e7d
Use millis for M600 audio feedback interval
2015-06-25 20:45:03 -05:00
Scott Lahteine
fb16a83b8a
Cleanup M600 documentation comments
2015-06-25 20:45:03 -05:00
Scott Lahteine
97ec224d72
Replace target with destination in M600
2015-06-25 20:45:03 -05:00
Scott Lahteine
4ce9ddbb74
Check the temperature before filament change
2015-06-25 20:45:03 -05:00
Richard Wackerbarth
a1e8714d5f
Merge 'Ultimaker' (PR#2331)
2015-06-25 09:13:50 -05:00
Jaime van Kessel
b8b5762e55
Update Ultimaker URL
2015-06-25 09:12:44 -05:00
Jaime van Kessel
d5bfbf5a59
Added correct dutch translation for calibrate.
2015-06-25 09:12:44 -05:00
Scott Lahteine
149c474e55
Updated Russian language (PR#2325)
...
Gleaned from
https://github.com/MarlinFirmware/Marlin/commit/4ac14a7e5fa8e6e395436664
8976eafd1ae220ae
2015-06-22 23:07:19 -04:00
AnHardt
722829b058
Move buzzing code to buzzr.h & buzzer.cpp (PR#2307)
...
at least the lcd independent part from Marlin_main.cpp.
2015-06-22 22:31:48 -04:00
AnHardt
c461975140
Rename and repair MELZI_1284 (PR#2301)
...
to MELZI_MAKR3D.
Fix for #2288
As the normal MELZI also can have a 1284.
2015-06-22 22:30:07 -04:00
schlotzz
1e9cf905c7
Enable ZigZag AutoBedLeveling on Deltas (PR#2273)
...
ZigZag has been disabled by fault due to do_topography_map
2015-06-15 20:26:25 -05:00
Scott Lahteine
ec93383ec8
Add SanityCheck for bed probe position settings (PR#2282)
2015-06-15 20:22:44 -05:00
Richard Wackerbarth
c2cef42f8e
Merge (PR#2285)
2015-06-15 20:21:01 -05:00
Scott Lahteine
dc40a5f6e0
Patch up more outdated config lines
2015-06-15 20:20:32 -05:00
Scott Lahteine
98c9111a7d
Update delta configs with latest settings
2015-06-15 20:20:32 -05:00
Scott Lahteine
e6baf8afd9
Fix up allen key settings in delta configs
2015-06-15 20:20:31 -05:00
Scott Lahteine
3b293fc5d1
Move Delta settings lower in delta files
2015-06-15 20:20:31 -05:00
