Commit graph

578 commits

Author SHA1 Message Date
AnHardt 20f909567a Merge https://github.com/MarlinFirmware/Marlin into tm-utf-minus-kanji
Conflicts:
	README.md
Solved
2015-03-26 10:05:00 +01:00
Christian Bohn eab5fad539 code formatting 2015-03-26 09:00:34 +01:00
Scott Lahteine 5eff15c409 Merge branch 'Development' into fixup_leveling
Latest upstream commits
2015-03-25 21:24:38 -07:00
Scott Lahteine 5261d35737 Fix custom m-code behavior
Don’t set CUSTOM_M_CODE_SET_Z_PROBE_OFFSET if there’s no Z probe
2015-03-25 21:20:50 -07:00
chris-bo 2dfd0e5ce7 Update Configuration.h
documentation how to disable buzzer feedback
2015-03-25 12:44:29 +01:00
AnHardt 94330705c7 Move definition of PIDdT back to temperature.h
make it unconditional
remove all definitions in the 'Configuration.h's
remove form 'Conditionals.h'
2015-03-25 11:51:41 +01:00
AnHardt 9d589cbb2a Merge https://github.com/MarlinFirmware/Marlin into tm3-utf-minus-kanji
Conflicts:
	Marlin/example_configurations/delta/generic/Configuration.h
	Marlin/example_configurations/delta/kossel_mini/Configuration.h
	Marlin/language.h

Conflicts solved
2015-03-24 16:59:15 +01:00
Scott Lahteine 4fbb80567e Get upstream commits 2015-03-22 23:07:22 -07:00
Scott Lahteine 7717e1ce33 Fix bad insert in configuration 2015-03-22 21:48:46 -07:00
Scott Lahteine 146501215f Fix mangled probe_pt calls
- Address issue #1669
- Remove the TOPO_ORIGIN configuration setting
2015-03-22 21:45:20 -07:00
Scott Lahteine 15eb5d35a2 Merge branch 'Development' into config_testing
Latest upstream commits
2015-03-21 15:42:45 -07:00
Scott Lahteine 2c9bd15625 Move LCD items to Conditionals.h
- `Conditionals.h` is included twice, setting LCD values the first time
2015-03-21 15:24:57 -07:00
Edward Patel a7e89d4cfa Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 2015-03-20 15:46:01 +01:00
AnHardt e72cb3e45d Merge https://github.com/MarlinFirmware/Marlin into tm2-utf-minus-kanji
Conflicts:
	Marlin/dogm_lcd_implementation.h
	Marlin/ultralcd_implementation_hitachi_HD44780.h

Fix merge conflicts 2
2015-03-20 13:35:47 +01:00
Scott Lahteine 63d5d28085 Merge branch 'Development' into config_testing
Latest upstream changes
2015-03-20 04:15:18 -07:00
Scott Lahteine b6d381f863 Divide up Conditionals to get LCD items early 2015-03-20 02:50:28 -07:00
Scott Lahteine 670006b919 Remove invariant code from Configurations
- Add `Conditionals.h` with calculated configuration values
- Add `SanityCheck.h` with checks for configuration errors
- Remove equivalent code from all configurations
- Move error checks from some sources to `SanityCheck.h` also
- Fix initialization of count_direction in stepper.cpp
2015-03-19 22:22:23 -07:00
AnHardt 47c1ea72af Merge https://github.com/kieranc/Marlin into PIDdebug
Conflicts:
	Marlin/temperature.cpp

Cleaned merge conflict.

Codeposition had changed.
Variable pid_input had vanished.

Signed-off-by: AnHardt <github@kitelab.de>
2015-03-20 00:07:36 +01:00
AnHardt e917477fec Merge https://github.com/MarlinFirmware/Marlin into tm-utf-minus-kanji
Conflicts:
	Marlin/dogm_lcd_implementation.h
	Marlin/fonts/make_fonts.bat

Claerd conflicts with my own #1621. (His was easy. :-) )

corrected typo in fonts/README.fonts

Applied changes to the new delta-configurations
 and deletet there some extra whitespace at the line-endings.
2015-03-19 12:35:43 +01:00
Edward Patel 8067a985ce Merge branch 'Development' into manual-bed-leveling+mesh-bed-level
Fixed conflicts:
	Marlin/planner.h
2015-03-17 22:48:08 +01:00
AnHardt 1883e1bb60 Applied thinkyheads corrections from 2015-03-17 2015-03-17 11:23:44 +01:00
AnHardt 00b162a993 Merge remote-tracking branch 'origin/utf-kanji' into tm-utf-minus-kanji
Conflicts:
	Marlin/language.h
Conflict cleaned
2015-03-16 17:13:49 +01:00
maverikou 8a739b6fba Merge branch 'Development' into delta_auto_bed_level
Conflicts:
	Marlin/Marlin_main.cpp
2015-03-16 08:24:26 +02:00
Edward Patel e983a5ab92 Disable option. Enable for use/test. 2015-03-16 02:50:11 +01:00
Edward Patel f34b9c83d1 Added comment about MESH_NUM axis points. 2015-03-16 01:48:46 +01:00
Scott Lahteine a686c9878f Move TOPO_ORIGIN define to Configuration.h
- Addressing issue #1608
2015-03-15 15:49:36 -07:00
Edward Patel 8005d22c81 Added menu option for bed leveling. 2015-03-15 23:24:32 +01:00
Edward Patel 0e51e53813 WIP. Adding bed leveling code. 2015-03-15 23:24:32 +01:00
AnHardt 2f374f1465 Removed Kanji. 2015-03-15 16:44:37 +01:00
Scott Lahteine 4b50205f11 Merge branch 'Development' into marlin_configurator
Latest upstream changes
2015-03-15 06:37:32 -07:00
AnHardt 96f8d20f2f Change selection logic another time
Automatic selection was to unflexible.

Updated documentation

Updated language files to new logic and documentation.

Updated bdf2u8g.exe
2015-03-13 14:26:58 +01:00
Scott Lahteine 08694339eb Merge branch 'Development' into marlin_configurator
Conflicts:
	Marlin/Configuration.h
2015-03-11 15:47:32 -07:00
Mehmet Sutas b373826428 Merge pull request #2 from MarlinFirmware/Development
update
2015-03-12 00:07:39 +02:00
AnHardt 5bafb1fe1f Add user test to language_test.h and make it default.
Improve description in Configuration.h
2015-03-11 20:46:52 +01:00
alexborro 9157cbd8f3 Add Travel Acceleration and change the M204 options
Added option to set Travel Acceleration (non printing moves).
The M204 options was a non sense (S for printing moves and T for retract
moves).

It has been changed to:
P = Printing moves
R = Retract only (no X, Y, Z) moves
T = Travel (non
printing) moves

I will add this info o G-Code wiki in reprap.org. I also advise to put
this info in Marlin next version changelog.
2015-03-11 13:19:02 -03:00
AnHardt 817751d4b9 Added new languages, the Cyrillic display and a test language to find out your hardware. 2015-03-11 11:10:35 +01:00
alexborro 5bf42066fa Fix typo in configuration.h 2015-03-10 15:06:34 -03:00
alexborro 8a4b62d081 Set more regular setup in configuration.h 2015-03-10 14:41:21 -03:00
alexborro 60ceca1bc1 Add speed configuration for home-bumping movement 2015-03-10 14:08:32 -03:00
Mehmet Sutas cfc6a3a87a Filament Runout Sensor Feature
With this change a mechanical or optical switch may be used to check the
availability of the filament and when the filament runs out an M600
(filament change) command is issued. This is only done while printing
with an SD card.

This feature was requested several times (issue #679), but the requests
were not accepted since it was believed that this situation should be
handled at host side. However during an SD print the control is totally
on firmware and I think that during an SD print it should be handled by
the firmware.

The original code was posted at reprap forum
(http://forums.reprap.org/read.php?1,297350) by Lazymonk. I have only
corrected some bugs of the code and improved it by adding definitions to
the configuration.h in order to make it more standardized.
2015-03-07 22:43:15 +02:00
maverikou e6862700af Add Z_RAISE_AFTER_PROBING to all config files 2015-03-07 20:55:30 +02:00
Scott Lahteine 0f3b7d5575 Update annotated configurations
- Also update base configs
2015-03-07 01:07:40 -08:00
Scott Lahteine d085725c86 More sanity-checking for ABL
- Moved sanity-checks to Marlin_main.cpp
- Applied to other configuration files
- Fixed formatting of ABL output
- Passing verbose level to probe_pt
- Miscellaneous cleanup
- Put CONFIG_STEPPERS_TOSHIBA into Configuration.h
2015-03-06 22:14:34 -08:00
Scott Lahteine 32744d41a9 Do sanity checking on LRFB values
- Setting boundaries based on configured limits, contrasting with G28
(which forgets these limits?)
2015-03-04 21:32:11 -08:00
Scott Lahteine a99470fbb0 Merge pull request #1527 from maverikou/panel_one
Added support for PanelOne from T3P3.
2015-02-26 16:01:13 -08:00
maverikou 8742b6bd56 Merge branch 'Development' into panel_one 2015-02-24 22:24:57 +02:00
AnHardt c6d2ebe452 Extend the idea of dummy temperature sensors.
Added a second sensor and made them configurable.
2015-02-24 11:02:16 +01:00
alexborro a57869ba49 Dummy Thermistor Table for testing purposes
Am I the only one who always need to change the thermistortable.h to add
a dummy table??
Ok, it is done. Just set the thermistor to 999 and it will always read
25C. Great for Testing or Development purposes.
2015-02-22 11:02:04 -03:00
Maverikou 2e166f5337 Added support for PanelOne from T3P3. 2015-02-22 09:14:43 +02:00
alexborro afc737ca0c Fix CoreXY Homing Routine.
Fixed how stepper ISR figure it out when the head (extruder) is going to
Min or Max direction.
Added Homing to Max Endstops.
2015-02-13 14:38:05 -02:00
Scott Lahteine 7866fa161f Merge pull request #1476 from Natealus/Development
Compiling errors with 4 Extruders defined and Viki 2 Implementation
2015-02-12 16:56:55 -08:00
kieranc b9ed873827 Enable PID debugging for heated bed 2015-02-10 14:13:06 +01:00
Natealus f4b0a40abb Additional fixes to temperature.cpp and found another missing line
Looks like INVERT_E3_DIR was missing in the configuration.h also as I
did a test compile with 4 extruders and Azteeg X3 Pro defined. So I also
added those lines too. Additional formatting to make the comments line
up better in that section.
2015-02-08 15:43:58 -07:00
AnHardt 8e92729141 Make display language configurable in Configuration.h 2015-02-08 13:45:22 +01:00
Natealus 38a500d05c Viki 2 Implementation
I've insert the define and pointer entries for the Viki 2 and miniViki
from Panucatt in all of the example configs and main config. With these
additions and with pins done in the old single pin.h style...I was able
to get the display working fine save for needing to turn Delta Segments
per Second down. But that's a common graphics lcd issue being looked
into right now.

I need assistance in understanding how the new divided pins files fit
together because my previous attempts at trying to get it to work
appropriately didn't seem successful. This originally came from trying
to find out how to swap the XYZ Min and Max Endstop pins in the Azteeg
X3 Pro. It only comes with one set of connectors and they're Min
Endstops. My previous experience didn't turn out well trying to tell the
firmware to home to the Min Endstops so the best solution I found was to
swap the pins in the firmware. If I'm missing a conflict with a setup
other than delta please let me know, but it makes sense in my setup.
2015-02-08 03:14:59 -07:00
Natealus 697ee2dc50 Compiling errors with 4 Extruders defined
Here were a few changes that I had to make/add lines for the 4th hotend.
A compiling problem in the Temperature.cpp and missing lines in
configuration.h and configuration_adv.h. I added these lines in all of
the example configs too.
2015-02-08 01:05:05 -07:00
AnHardt 33f8580255 Merge branch 'lcd-width' into b- 2015-02-03 14:45:58 +01:00
AnHardt 0c24bb6cfc Adjust LCD_WIDTH to make better use of DOGM LCDs 2015-02-03 14:21:43 +01:00
AnHardt 65642592ee Added dualline version. 2015-02-03 12:25:36 +01:00
AnHardt f9cc1df00b Droped URL from bootsplash. 2015-02-03 11:14:27 +01:00
Scott Lahteine b3973ed224 Fix HD44780 misspelled as HD44870 2015-02-02 22:33:58 -08:00
Scott Lahteine 6d81968db5 Merge pull request #1450 from docdawning/Development
Normalized section headers, added some headers, added help URLs for newb...
2015-02-02 21:17:06 -08:00
DocDawning 055c4beaf9 Normalized section headers, added some headers, added help URLs for newbies 2015-02-02 14:11:09 -07:00
AnHardt 26e55471f8 Update example configurations. 2015-02-01 13:46:32 +01:00
AnHardt 85385be132 Removed now automatic define of DISPLAY_CHARSET_DOGM + improved description. 2015-02-01 13:33:25 +01:00
AnHardt 27c638803e Defined three charsets. 2015-01-30 10:28:22 +01:00
AnHardt 8c792c7b22 Make STRING_VERSION and VERSION_STRING the same 2015-01-26 15:40:44 +01:00
daid 53f971095d Revert "Reduce PROGMEM warnings" 2015-01-16 16:48:22 +01:00
Bo Herrmannsen ab074dac17 Merge pull request #1344 from grob6000/independent_pid
Independent PID parameters for each extruder
2015-01-13 12:10:37 +01:00
Bo Herrmannsen d4a665694a Merge pull request #1350 from odewdney/Development
Reduce PROGMEM warnings
2015-01-13 11:26:50 +01:00
odewdney 23bfe30036 moved include themister to temperature.c 2015-01-11 18:18:32 +00:00
grob6000 bf2c923db5 Make multiple PID parameters a config option
* Adds config parameter `PID_PARAMS_PER_EXTRUDER` - allows single PID
parameters to be used where this would be preferable (e.g. dual
identical extruders)
* When disabled, will use `float Kp, Ki, Kd, Kc;` as before.
Preprocessor macros used to switch between.
* ultralcd.cpp defines extra menus for extra parameters only where
required
* M301 reports `e:xx` only if independent pid parameters enabled
* EEPROM structure still leaves space for 3 extruders worth, when undef
will save single parameter to all extruder positions, but only read the
first
* Switching off saves approx 330 B with no LCD enabled, 2634B with LCD
(RRD) enabled: this is significant.
* LCD modifications should be tested.
2015-01-11 13:50:17 +11:00
Steffen Vogel 8f0dba7cbf adding string for bouts splash string to config 2015-01-09 18:48:30 +01:00
Alex Borro 2bbb68be8a Fix calculation of BAL grid fitting into the bed
The previous calc was wrong. Between N points there are only N-1 gaps,
not N.

So changing AUTO_BED_LEVELING_GRID_POINTS to
(AUTO_BED_LEVELING_GRID_POINTS-1)
2015-01-09 10:17:33 -02:00
andrewsil1 269ec9f87f Fix grammar/typos in new Configuration.h option
(For the SLOW_PWM_HEATERS option)
2015-01-07 12:41:09 -08:00
Dino Del Favero 5cfe13f240 Correct some mistakes 2015-01-06 21:55:08 +01:00
DinoMesina 6730335657 Update Configuration.h 2015-01-06 18:06:02 +01:00
Lane Roberts 2701dd8a17 Due to the fix for #1248, X and Y probe offsets must not be floats.
The compiler does not support comparing float values: "error: floating constant in preprocessor expression"
The loss in X/Y precision shouldn't matter for Z probes, as most microswitches or inductive sensors are larger than 1mm square anyway.
2014-12-31 12:34:59 -06:00
Caleb Anderson 991a74b75b Move delta calibration menu to sample delta configuration.
Turn off by default.
2014-12-29 18:03:56 -07:00
Caleb Anderson 5b336a4cdb Delta calibration menu based on http://minow.blogspot.com/index.html#4918805519571907051
To test/enable, uncomment the #define DELTA_CALIBRATION_MENU in Configuration.h
2014-12-29 10:13:00 -07:00
fmalpartida ec33df0554 Merge branch 'SAV-MkI_merge' into Development
Tested for SAV MKI and SAV 3D LCD on lewihe.
2014-12-28 19:54:06 +01:00
alexborro 3afe66bb0c Fix issues #1248, #1240
- Fixed issue when BAL area probing is shorter than it should be for
grid probing
- Warning when BAL activated with Delta Kinematics
- Fix XY_TRAVEL_SPEED when homing Z axis
2014-12-28 13:27:39 -02:00
David Forrest cf52c48d19 Configuration.m: Set PID_INTEGRAL_DRIVE_MAX from PID_MAX from BANG_MAX.
Current defaults are all 255.  If it makes sense to reduce them, they should come down together, and
be in a  PID_INTEGRAL_DRIVE_MAX <= PID_MAX <- BANG_MAX relationship.
2014-12-27 15:26:09 -05:00
alexborro d74aabf259 Revert "Change Auto_Bed_Leveling to Auto_Bed_Compensation" 2014-12-21 10:06:05 -02:00
John Davis 81568c3c6d Update Configuration.h
Changed Auto Bed Level to Auto Bed Compensation
2014-12-19 17:06:56 -05:00
Scott Lahteine 3b1f186c0c Clean up configs 2014-12-18 13:59:31 -08:00
Scott Lahteine f83d0f2a68 Defines for electronics boards
Added boards.h which contains defines for all the board numbers, plus
some shorthand macros for less typing.
2014-12-18 13:59:31 -08:00
Bo Herrmannsen 280504e2e0 Merge pull request #908 from alromh87/Marlin_v1
Support for Gen3 Monolithic electronics
2014-12-17 22:28:07 +01:00
Bo Herrmannsen 91d740e128 Merge pull request #1141 from filipmu/Filament-Sensor
Display filament sensor data on a 20x4 LCD or Graphical LCD
2014-12-17 20:38:30 +01:00
Filip Mulier d84934d8c5 Display Filament Sensor data on 20x4 LCD
Changes to support displaying the real-time filament width and the
volume factor on a 20x4 LCD.  The data is displayed on the 4th line.
First the status message is displayed for 5 seconds, and then the
filament data is displayed.  The status message can be seen by
re-selecting the info screen in the menu.
2014-11-10 21:43:58 -06:00
Filip Mulier 5c8107bcdd Commented out FILAMENT_SENSOR #define
Commented out the FILAMENT_SENSOR define so that it is not enabled by
default.  Code does not work on all hardware variants.
2014-11-09 13:26:02 -06:00
Erik van der Zalm 058e446531 Merge pull request #1037 from filipmu/Filament-Sensor
Support for a filament diameter sensor
2014-10-11 22:56:01 +02:00
Erik van der Zalm aaaf8fe8dd Merge pull request #1068 from darkjavi/Marlin_v1
Added profile for RAMPS with 2 extruders and 1 fan, no heated bed
2014-10-06 13:41:38 +02:00
Erik van der Zalm ce85515428 Merge pull request #1082 from Fourmi/Marlin_v1
Add thermistor table
2014-10-06 13:39:36 +02:00
Scott Lahteine f989bd5435 Simple code cleanup. Rename "homeing" to homing. 2014-10-05 13:20:53 -07:00
Fourmi b5dc228a7a Update configuration.h
Add another comment for thermistor 13 ,use with Hotend "Simple ONE & All In ONE"
2014-09-27 09:02:58 +02:00
Fourmi 3cbb2f56c6 Update configuration.h
Add another comment on configuration.h for the value of thermistor.
I make a pull request on thermistortables.h with my thermistor (12),but y see there is a comment on configuration with number 12 but it's not present on thermistortables.h ?

Thx
2014-09-26 22:01:06 +02:00
Javi 40ba644bb4 Added profile for RAMPS with 2 extruders and 1 fan.
modified:   Marlin/Configuration.h
	modified:   Marlin/pins.h
2014-09-06 02:53:36 +02:00
Filip Mulier fe3a09bbcf Correct analog sampling time for additional A to D sample
Adjusted the  #define PID_dT to reflect 10 A to D sample steps, vs
original 8.
2014-09-01 06:26:19 -05:00
Erik van der Zalm 018b68a5c4 Merge pull request #976 from cocktailyogi/SCARA_by_Yogi
Implemented SCARA-Maths
2014-08-28 16:32:52 +02:00
Erik van der Zalm 0fbfb1bf82 Merge pull request #991 from bonm014/patch-1
Leapfrog controller board support
2014-08-28 16:27:52 +02:00
Erik van der Zalm 68dd5e635e Merge pull request #1024 from oliasmage/Marlin_v1
Adding Z Probe via sled mounted endstop
2014-08-28 16:15:54 +02:00
Filip Mulier e3c88a5120 Filament sensor changes to config file
Update the config file for improvements and clarifying what diameter to
use in the slicer software.
2014-08-16 07:08:09 -05:00
Roxy-3DPrintBoard 0adbc79571 Fix Default Configuration so Auto Bed Leveling is off
This snapshot has the Auto Bed Leveling turned off because most Marlin
users do not have that feature.
2014-08-10 10:18:54 -05:00
Roxy-3DPrintBoard 0091865583 Z_PROBE_REPEATABILITY test
Z_PROBE_REPEATABILITY test for Auto Bed Leveling.
Implemented as M48 with extra user specified options.
Full support at
http://3dprintboard.com/showthread.php?2802-Auto_Bed_Leveling-Z-Probe-Repeatability-code
2014-08-09 15:37:23 -05:00
Filip Mulier 85649a4549 Real-time filament diameter measurement and control
This feature allows the printer to read the filament diameter
automatically and adjust the printer in real time.  Added code to read
an analog voltage that represents a filament diameter measurement.  This
measurement is delayed in a ring buffer to compensate for sensors that
are a distance away from the extruder.  The measurement is used to
adjust the volumetric_multiplier for the extruder.  Some additional g
codes (M404, M405, M406, M407) are used to set parameters and turn
on/off the control. g code M221 is updated.  Pins for RAMPS1.4, RAMBO,
and Printrboard are identified for analog input.  The configuration file
is updated with relevant user parameters.
2014-08-06 19:30:57 -05:00
Charles Bell e7707aedbc Commented out new #defines in Configuration.h. 2014-08-04 10:18:25 -04:00
Charles Bell 0a8dc0e96b Added documentation to the README.md for the sled Z probe option. CAB 2014-08-04 10:07:43 -04:00
cocktailyogi 2f4a20257c imported last Marlin changes 2014-07-20 13:49:26 +02:00
alexborro 50b4e86f75 Add "Thermal Runaway Protection" feature
This is a feature to protect your printer from burn up in flames if it
has a thermistor coming off place (this happened to a friend of mine
recently and motivated me writing this feature).

The issue: If a thermistor come off, it will read a lower temperature
than actual. The system will turn the heater on forever, burning up the
filament and anything
else around.

After the temperature reaches the target for the first time, this
feature will start measuring for how long the current temperature stays
below the target minus _HYSTERESIS (set_temperature -
THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).

If it stays longer than _PERIOD, it means the thermistor temperature
cannot catch up with the target, so something *may be* wrong. Then, to
be on the safe side, the system will he halt.

Bear in mind the count down will just start AFTER the first time the
thermistor temperature is over the target, so you will have no problem
if your extruder heater takes 2 minutes to hit the target on heating.
2014-07-18 15:28:01 +02:00
bonm014 b5417be109 Update Configuration.h
Leapfrog added to the board list
2014-07-03 21:03:22 +02:00
alexborro 43c298a7a9 Add "Thermal Runaway Protection" feature
This is a feature to protect your printer from burn up in flames if it
has a thermistor coming off place (this happened to a friend of mine
recently and motivated me writing this feature).

The issue: If a thermistor come off, it will read a lower temperature
than actual. The system will turn the heater on forever, burning up the
filament and anything
else around.

After the temperature reaches the target for the first time, this
feature will start measuring for how long the current temperature stays
below the target minus _HYSTERESIS (set_temperature -
THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).

If it stays longer than _PERIOD, it means the thermistor temperature
cannot catch up with the target, so something *may be* wrong. Then, to
be on the safe side, the system will he halt.

Bear in mind the count down will just start AFTER the first time the
thermistor temperature is over the target, so you will have no problem
if your extruder heater takes 2 minutes to hit the target on heating.
2014-06-30 15:22:49 -03:00
cocktailyogi 512f2a3136 restore Branch from Backup
sorry for that
2014-06-23 17:09:57 +02:00
Greg Tan 6e6e4e2143 Added thermistor table for the 500C thermistor shipped with the Pico hot end. 2014-06-08 09:35:04 +08:00
Dim3nsioneer 8a32c5395b renaming the disable inactive extruder feature 2014-06-02 14:07:02 +02:00
Dim3nsioneer 29e7639933 Add switch unused feeder(s) off
Having the non-active feeder motors powered on all the time is not
necessary. A feature to deactivate the unused feeder motors has been
implemented. The feature is enabled on default but can be switched off
in the configuration.
2014-06-02 08:13:09 +02:00
David Forrest 09b84faa00 Configuration.h, pins.h: Add MOTHERBOARD 84 for Teensy++2.0 2014-05-29 17:19:16 -04:00
Alejandro Romero 1c9a70cee9 Support for Gen3 Monolithic electronics
Techzone Monotronics support, ignoring the tip manager and using fan connector as on Sprinter FW
TODO: Add support for tipmanager
2014-05-06 19:24:20 -05:00
daid 2acd3792fc Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1 2014-05-01 12:03:47 +02:00
daid 8b4c4aa5c3 Add feature to check&retry CRC read errors on SD. 2014-05-01 12:03:41 +02:00
Cameron Lai da6b536182 Add 5DPrint D8 Driver Board info and temperature table for Makibox hot bed 2014-04-24 16:49:42 +08:00
Nutz95 3161740df9 This table is made for thermistor 3950 (can be found on ebay for cheap)
it's caracteristics are :

R25℃ ;100KΩ±1%

B Value(R25/50℃):3990K 1%
Dissipation Factor(mW/℃):1.1~1.6 In still Air
Thermal Time Constant(S):10~17 In Still Air
Operating temperature range:  (-50~+260°C)
Dimension:  1.8mm Dia X4.1mm
Lead Length  :30mm

This table was found on the following blogs:
http://cae2100.wordpress.com/2014/03/08/beta3950-thermistor-table-for-marlin/

and

http://microfabricator.com/articles/view/id/531ad7e59aad9d3131000000/beta-3950-thermistor-table-for-marlin
2014-04-13 17:03:20 +02:00
Gabe Rosenhouse d3f305332a Allowable range now includes default value 2014-04-06 19:45:56 -05:00
Gabe Rosenhouse b0aeac117f Adjustable Z probe offset, via custom M-code 2014-04-06 19:45:56 -05:00
David Forrest b0093a1513 thermistortables.h: Add comments that table 60 uses beta=3950. 2014-03-26 23:41:10 -04:00
Gabe Rosenhouse 174b8d99d5 Simplify 3-point probing using new code only 2014-02-19 21:48:05 -08:00
Gabe Rosenhouse 3b718b816c better documentation 2014-02-19 14:04:37 -08:00
Gabe Rosenhouse 34fd59c370 ABL at any points 2014-02-19 13:18:21 -08:00
nothinman 3f455889d0 Merge pull request #769 from Cylindric3D/typofixes_1
Various typo fixes - only in comments, no code changes.
2014-02-17 11:30:01 +00:00
nothinman d4ba23bc28 Merge pull request #770 from josefpavlik/Marlin_v1
Marlin v1
2014-02-17 11:27:05 +00:00
Mark Hanford ab0d3c4fb3 Various typo fixes - only in comments, no code changes. 2014-02-14 11:48:24 +00:00
Josef Pavlik 831fc2a952 Pt100 and Pt1000 temperature sensors handling 2014-02-14 12:26:27 +01:00
daid 71bb3a8133 Add comments for Ultimainboard 2.0 configuration. 2014-02-13 10:53:46 +01:00
Jim Morris b819fc53ca Add Azteeg X3 Pro as motherboard 68
Add digipot i2c control for MCP4451
Allow M907 to set i2c digipot currents in amps
Fix Makefile to allow Azteeg motherboards
Fix Makefile to allow Wire libraries only
Add beeper pin for Azteeg X3 Pro
2014-02-05 01:47:12 -08:00
ErikZalm e1ae7952eb Merge pull request #743 from Opticalworm/Marlin_v1
Improved support for panelolu2 encoder and buzzer
2014-02-03 12:33:10 -08:00
David Forrest a5f53f0cf3 Heater wattage reporting for M105 using EXTRUDER_WATTS and BED_WATTS 2014-02-03 14:50:28 -05:00
Ronald 8d162e5bd7 Improved support for panelolu2 encoder and buzzer
I added #define for LCD_FEEDBACK_FREQUENCY_HZ and
LCD_FEEDBACK_FREQUENCY_DURATION_MS  which is used to alter the default
buzzer sound.

When selecting Panelolu2 in configuration.h:
- it automatically sets the correct ENCODER_PULSES_PER_STEP and
ENCODER_STEPS_PER_MENU_ITEM.
- if LCD_USE_I2C_BUZZER is defined it will also set the default
LCD_FEEDBACK_FREQUENCY_HZ and LCD_FEEDBACK_FREQUENCY_DURATION_MS

When selecting the sanguinololu 1284p the following is true:
- its now enables  LARGE_FLASH
- It enables the gcode M300 when the panelolu2 LCD_USE_I2C_BUZZER is
defined
2014-02-03 07:45:03 +00:00
David Forrest 76cf07c3f7 Configuration.h: Use OVERSAMPLENR in dT_PID definition. 2014-01-21 23:25:51 -05:00
fsantini 6ae7f7870d Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into ErikZalm
Conflicts:
	Marlin/Configuration.h
	Marlin/Marlin_main.cpp
2013-12-23 12:20:32 +01:00
- e5d3044801 Added posibility to set ENCODER_STEPS_PER_MENU_ITEM in Configuration.h like ENCODER_PULSES_PER_STEP as it depends on it for usability 2013-12-08 21:34:56 +01:00
Michal Dyntar e8786bf110 Added support for Cheaptronic v1 electronic 2013-12-07 13:29:47 +01:00
fsantini cc2925b705 Implemented a least squares fit of the bed equation for auto bed leveling.
The code for the LSQ solver (qr_solve) is copyrighted by John Burkardt and released under LGPL here:
http://people.sc.fsu.edu/~%20jburkardt/c_src/qr_solve/qr_solve.html
(see qr_solve.cpp for further copyright information)
2013-12-06 21:46:25 +01:00
Alex Borro b33375d438 Z Axis Safe Homing when using Z Probe
Recommended for those who are using the Z Probe for Z Homing (as
Z-Endstop)

This feature has two changes:

1) Allow user to choose where the Z Probe will touch the bed when homing
all axis together (G28) by setting below defines:

Z_SAFE_HOMING_X_POINT
Z_SAFE_HOMING_Y_POINT

2) Prevents the user to perform Z Axis Homing when the Z Probe is
outsite bed.
2013-11-27 22:37:35 -02:00
Erik van der Zalm 48a185d004 Fixed compile errors from bad commits. 2013-11-10 16:36:37 +01:00
ErikZalm 59b96e323e Merge pull request #640 from fmalpartida/SAV-MkI
Added support for BT on AT90USB devices, corrected LCD bug, added new board and LCD
2013-11-10 07:26:08 -08:00
fmalpartida 7b556d2e96 Added BT support on AT90USB devices
Added AT90USB device BT connectivity support using second UART.
2013-11-03 19:57:06 +01:00
Kaz Walker a5e8575829 Add UUID support to M115 responses. 2013-11-01 14:51:50 -06:00
fmalpartida b5a964fcc5 Initial SAV MkI (RepRap CloneWars board) integration.
Included support for BT dongle on AT90USB boards.
Added LCD Shift Register LCD control
Included support for RepRap Clone Wars project board (SAV MKI).
2013-10-30 11:45:32 +01:00
dumle29 f941203172 PS_ON configurable boot state
Allows the user to select wheter or not the PSU should be turned on or
kept in standby when marlin boots
2013-10-29 18:44:56 +01:00
Erik van der Zalm 8a08cca0f2 Added temperature status less.
Hopefully fixed viky button handling without braking other boards
2013-10-20 12:12:35 +02:00
ErikZalm 6a803ba9c5 Merge pull request #590 from timkoster/Marlin_v1
Added BlinkM support over i2c
2013-10-20 00:51:35 -07:00
Alex Borro 6f85a8c7aa Bed auto Leveling change: Raise Z before homing
- Added "Z_RAISE_BEFORE_HOMING" for raising Z the defined distance
before homing. This is useful to avoid Z-Probe collision when hotend is
near bed.

- Fixed the issue of Z not going bellow Z_PROBE_OFFSET when
"min_software_endstops" is true.
Now the Z_PROBE_OFFSET is not set in Z_MIN_POS, it is added after
homing.
2013-10-12 17:28:11 -03:00
Alex Borro 253dfc4bc1 Bed Auto Leveling feature
Check the Readme for instruction how to enable and configure the feature
2013-09-29 13:20:06 -03:00
phq1910 57173739a1 Update Configuration.h
Include CPU Sethi 3D
2013-09-26 11:29:44 -03:00
Erik van der Zalm 0dca49a7c0 Added Azteeg X3 board. 2013-09-24 17:31:16 +02:00
Erik van der Zalm d8c2c810b4 Added info to the delta configuration files in the configuration.h file 2013-09-23 23:29:46 +02:00
Erik van der Zalm 9bc88f8bab Placed optional ENCODER_PULSES_PER_STEP in the configuration.h file 2013-09-23 23:25:11 +02:00
Tim Koster 61db046b32 Added #ifdef BLINKM around new code. Also refined BlinkM.h. 2013-09-20 10:57:42 +03:00
Erik van der Zalm 3626b5ad8b Removed Delta from the default config file.
Changed EEPROM CHITCHAT behavior. M503 is always enabled.
2013-09-14 13:50:09 +02:00
Tim Koster 88dfeefca3 Define BlinkM default disabled 2013-09-10 12:32:21 +03:00
Tim Koster 5350faf2a2 Merge https://github.com/timkoster/MarlinBlinkM into Marlin_v1 2013-09-10 12:27:26 +03:00
Tim Koster 7016cc9511 Added BlinkM support over i2c 2013-09-10 12:18:29 +03:00
Tim Koster 3b315b3da0 Added BlinkM support over i2c 2013-09-06 22:25:39 +03:00
Nicolas Rossi a54fe2d73c Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin.git into Marlin_v1
Conflicts:
	Marlin/Marlin_main.cpp
2013-08-03 13:05:56 +02:00
hg42@gmx.net 2ca983568d separate INVERTING for MIN and MAX endstops (6 #defines instead of 3) 2013-08-01 15:06:39 +02:00
Nicolas Rossi 9bf1cf1b22 Pre-calculate diagonal rod length squared 2013-07-30 14:09:21 +02:00
Nicolas Rossi 4623e78ce0 Added Honeywell thermistor 135-104LAF-J01 2013-07-30 14:02:18 +02:00
Guillaume Seguin 34da3a0a3f Merge github.com:ErikZalm/Marlin into Marlin_v1
Conflicts:
	Marlin/language.h
2013-07-23 21:46:41 +02:00
Erik van der Zalm c4a2077951 M109 and M190 now wait when cooling down if R is used instead of S.
M109 S180 waits only when heating.
M109 R180 also waits when cooling.
2013-07-14 21:10:24 +02:00
Erik van der Zalm 6397b3339c restored configuration.h defaults 2013-07-14 15:49:03 +02:00
Michael Mayer e509cdbeb0 added contrast control function for gLCDs 2013-07-14 15:28:26 +07:00
Michael Mayer 99b7e926e7 added MaKr3d Melzi board 2013-07-14 15:17:55 +07:00
Erik van der Zalm ecf3ab5de4 Added thermistor 60 to configuration.h 2013-06-27 23:25:51 +02:00
Nicolas Rossi 2daa85918e Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin.git into Marlin_v1
Conflicts:
	Marlin/Configuration.h
	Marlin/Marlin_main.cpp
	Marlin/language.h
	Marlin/pins.h
	Marlin/ultralcd.cpp
2013-06-20 23:59:56 +02:00
Erik van der Zalm 2015989f84 Added DISABLE_MIN_ENDSTOPS 2013-06-18 19:20:26 +02:00
Christian Inci 648d45cfb2 Fix Pin Description Typo
Reverse 'Bed' and 'Fan' at the RAMPS 33 Description.

Signed-off-by: Christian Inci <chris.pcguy.inci@gmail.com>
2013-06-16 23:35:33 +02:00
lajos 02dee80fa5 added Azteeg X1 motherboard 2013-06-15 16:58:17 -04:00
Erik van der Zalm e34c9981ab Delta disabled by default 2013-06-11 22:33:58 +02:00
Erik van der Zalm 7ad12be763 Merge branch 'Marlin_v1' of https://github.com/codexmas/Marlin into codexmas-Marlin_v1
Conflicts:
	Marlin/Configuration.h
	README.md
2013-06-09 23:10:41 +02:00
Erik van der Zalm 408169aef4 Merge branch 'Marlin_v1' of https://github.com/BorisLandoni/Marlin into BorisLandoni-Marlin_v1
Conflicts:
	Marlin/Configuration.h
	Marlin/language.h
	Marlin/pins.h
2013-06-09 22:57:40 +02:00
Erik van der Zalm bd96d22bfb Merge branch 'Marlin_v1' into thinkyhead
Conflicts:
	Marlin/Configuration.h
	Marlin/Configuration_adv.h
	Marlin/Marlin.h
	Marlin/Marlin_main.cpp
	Marlin/Servo.cpp
	Marlin/language.h
	Marlin/pins.h
	Marlin/planner.cpp
	Marlin/ultralcd_implementation_hitachi_HD44780.h
	README.md
2013-06-09 22:26:47 +02:00
Erik van der Zalm 6f4a6e531c Merge branch 'deltabot' into Marlin_v1 2013-06-09 13:55:18 +02:00
Erik van der Zalm ff6fa09ecf Moved corexy implementation from stepper to planner
(Thanks iquizzle)
2013-06-09 13:10:06 +02:00
Erik van der Zalm c8dcc7c208 Allow increasing the software PWM frequency. 2013-06-09 12:52:49 +02:00
Erik van der Zalm 373f3ecab3 Merge branch 'deltabot' of https://github.com/jcrocholl/Marlin into deltabot
Conflicts:
	Marlin/Configuration.h
	Marlin/Marlin_main.cpp
	Marlin/pins.h
2013-06-09 00:51:58 +02:00
kiyoshigawa 6a81291c57 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
This should fix issues with pull request 467, I hope.

Conflicts:
	Marlin/Configuration.h
	Marlin/Marlin.pde
	Marlin/ultralcd_implementation_hitachi_HD44780.h
2013-06-08 08:48:18 -06:00
BorisLandoni c1cb5977ee Update Configuration.h 2013-06-08 14:37:39 +02:00
BorisLandoni 8a5bd8a808 Update Configuration.h 2013-06-08 14:37:17 +02:00
BorisLandoni 6588933c04 Update Configuration.h 2013-06-07 18:36:16 +03:00
Scott Lahteine 5dabc95409 Apply all changes from latest Marlin_V1
Diffed and merged, preserving my updates
2013-06-06 15:49:25 -07:00
Gord Christmas f4f30c9d64 Added servo actuated enstop coding to allow G28 command to engage and retract a servo to specified angles. 2013-06-06 07:36:52 -07:00
Erik van der Zalm 79374f0b93 Merge branch 'reisnyderb' of https://github.com/ErikZalm/Marlin into Marlin_v1 2013-06-05 17:44:48 +02:00
kiyoshigawa 4b19c8552e Fixing changed Configuration.h settings to be default values per ErikZalm Request. 2013-06-04 12:01:55 -06:00
Erik van der Zalm 5090c56651 More redundant temp sensor changes. (After testing and debugging by reifsnderb) 2013-05-29 19:29:30 +02:00
Gatulibu b78fa6bb70 Added support for Megatronics v2.0 and Minitronics v1.0
merged from code downloaded from reprapworld.com
2013-05-28 14:03:31 +02:00
Erik van der Zalm 9be61cdc02 Added redundant temp sensor 2013-05-26 17:57:49 +02:00
Alexander Kasimir e2ff536b03 Fixed typo in Comment 2013-05-22 16:02:03 +03:00
Robert F-C 0d4a9444c4 Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1 2013-05-19 08:50:58 +10:00
Gord Christmas 28ada096e2 Adding servo documentation 2013-05-18 06:01:58 -07:00
Robert F-C dfa549f268 Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1 2013-05-18 21:59:39 +10:00
Gord Christmas dc59f07d24 First attempt at refactoring of original servo code. Only adding servo support as a start to keep things simple. 2013-05-16 07:03:01 -07:00
Erik van der Zalm bd2cd4903e Added #ifdef BARICUDA around the BariCUDA changes 2013-05-14 23:56:32 +02:00
gregor 2739c26c4f changes:
- changed the variables from keypad to reprapworld_keypad
- added a missing ifdef check
2013-05-10 22:20:02 +02:00
gregor 6fb9573157 added support for the reprapworld keypad 2013-05-10 21:57:17 +02:00
Tim Anderson 1fa61c297e Turning off Control Panel by Default and Updating the link to the LiquidCrystal_I2C library to avoid confusion. 2013-05-06 23:23:54 -06:00
kiyoshigawa b27a59f41e Added support for Elefu RA Board and Elefu Control Panel 2013-05-06 08:44:38 -06:00
Scott Lahteine 0ef54f2f85 Make M303 silent when "S0" is sent
If S is left out perhaps it should be silent, but check the spec for
this M code.
2013-05-02 09:55:15 -07:00
Scott Lahteine a200521eab Added CUSTOM_MENDEL_NAME option to Configuration.h and language.h
Also cosmetic comment changes and spelling corrections in printed
messages
2013-05-02 09:22:58 -07:00
Martin Renold 1a397825f9 fix DEFAULT_AXIS_STEPS_PER_UNIT minor Z rounding error 2013-05-01 08:30:24 +02:00
Robert F-C c3cdaceab3 Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1 2013-04-29 22:13:55 +10:00
Robert F-C 788d62bcc4 Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
Conflicts:
	Marlin/Marlin.pde
	Marlin/ultralcd.cpp
	Marlin/ultralcd_implementation_hitachi_HD44780.h
2013-04-29 21:13:46 +10:00
Lukasz Stefanowicz d71f1e9bf6 Add (as an option) slower SD transfer mode 2013-04-24 10:50:57 +02:00
MaikStohn 13596e8722 Added RepRapDiscount FULL GRAPHIC Smart Controller 2013-04-16 14:21:39 +02:00
daid303 c80a78bb70 Lower the default max E feedrate a bit. With the stepper fix this is much to high. 2013-04-12 13:54:38 +02:00
ErikZalm 7a5c474d91 Update Configuration.h 2013-03-28 21:27:50 +01:00
ErikZalm 9fb8bd5685 Merge pull request #433 from whosawhatsis/bang-mode
Separate PID_MAX from BANG_MAX
2013-03-25 13:11:34 -07:00
Robert F-C 9322c408c6 Updated for LiquidTWI2 library version 1.2.3
The new version of the library means that PANELOLU no longer needs to be
defined in LiquidTWI.h (the library file can be used as is) and the new
version of the library also enables the buzzer on the Panucatt VIKI
panel.
2013-03-24 18:19:58 +11:00
whosawhatsis fd5b7e0cec Separate PID_MAX from BANG_MAX
This allows PID_FUNCTIONAL_RANGE to use a maximum duty cycle higher
than PID_MAX. This is useful for powerful heaters to heat quickly in
bang-bang mode, but use a lower duty cycle that is easier to stabilize
in PID mode.
2013-03-22 18:16:26 -07:00
blddk 72419f69a9 Added rumba 2013-03-22 18:41:54 +01:00
Nicolas Rossi aba67e2449 No bed config for RAMPS
The motherboard 35 is a config without bed with this pins setting :
D8 Extruder
D9 Fan
D10 Controller Fan
2013-03-05 15:51:24 +01:00
Robert F-C 7bad72359c Support encoder click on PANELOLU2 being read through I2C
This change also handles the case where the pause/stop/restart button on
the VIKI is not used. Make LCD I2C buzz sound the same as the normal
buzz (300ms is too long for quick feedback).
2013-03-03 18:47:50 +11:00
Robert F-C 1daf2f3256 Number of extruders is not an advanced configuration - it is a basic property. 2013-03-02 16:14:19 +11:00
Dirk Eichel b2c1c64fb1 Add Motherboard variant 64 - STB V1.1
Definition for the graphic LCD are already in it, they will not harm the
configuration as they are only defined constants
2013-03-01 17:39:54 +01:00
Robert F-C 6beb42cdf6 Attempt to address Bernhard's comments
Refactor configuration to try to make items clearer (what defines a
panel vs what is user changeable).
2013-03-01 01:17:07 +11:00
Robert F-C 839bef6d5d Fix Configuration.h file to not define LCDs be default.
Also fix compile time check in Marlin.pde
2013-02-28 02:32:20 +11:00
Robert F-C 1292d735ba Converge all I2C LCD branches (PANELOLU2, VIKI & PCF8575)
This includes refactoring the buttons code to remove a large amount of
non-pin dependent duplication from pins.h.
2013-02-28 02:04:51 +11:00
MendelMax 67710df9f3 Made i2c mode wok with the hardware I am able to test (ywrobot / sainsmart i2c LCD 2004)
Removed incorrect LiquidCrystal_I2C Library
2013-02-26 22:22:12 +00:00
Bob Clough 2b567d1df5 Added I2C port expander support to HD44780 2013-02-25 14:22:14 +00:00
Bob Clough 06272f463d Added Config variables for activating I2C LCDs and setting type and address 2013-02-25 14:14:46 +00:00
Denis B 70871715e4 Added support for extruder offset handling
The extruder offset can be specified in the configuration
file or adjusted on the fly using the "M218 T# X# Y#" command.
The EEPROM support is not yet merged in.
The "T#" command can take option "F#" that specifies the feedrate
at which the printing head should be re-positioned. If not
specified the re-positioning move is not preformed immediately,
but the coordinates are adjusted for the printer to properly
position the head when the next movement happens.
2013-02-04 23:05:45 -05:00
Daniele Sdei 9ecb267b63 Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1 2013-01-14 15:47:40 +01:00
Daniele Sdei 3cf59f6f9a add RepRapPro Huxley thermistor tables 2013-01-14 15:36:08 +01:00
daid303 bbe7d3d0fe Fixed #312 2013-01-08 17:09:57 +01:00
daid303 8b88e3b386 Fixed #345, Fixed #267. 2013-01-08 12:14:55 +01:00
Nicolas Rossi f3c1fc70a9 Power signal control definitions for ATX and others 2013-01-07 14:33:30 +01:00
Erik vd Zalm 6752cb2d9c PID now per extruder. Fixed typo 2013-01-06 14:26:23 +01:00
Erik vd Zalm 0ac452e252 Disable is now multi extruder compatible. M84 got a T option. 2013-01-06 13:37:01 +01:00
Johann Rocholl 9e7b5056a0 {X,Y,Z}_{MIN,MAX}_POS are actually in Gcode coordinates. 2012-12-28 16:20:10 -08:00
Johann Rocholl 1c2ecddae4 Fix typo (# missing before define). 2012-12-16 12:33:44 -08:00
Johann Rocholl 3b2e5027e5 Merged updates from Marlin_v1. 2012-12-16 12:19:24 -08:00
daid303 55ba90ac19 Add PID functional range setting. With high powered heaters the current functional range of 10 degrees causes high overshoots as the PID needs to kick in before the temperature hits 10 degrees below target. 2012-12-12 09:08:37 +01:00
daid303 5ff5cee8ce Fix the sensitive pin definitions, there where analogue numbers in the digital pin list. Also made M42 without a P function on the LED_PIN (which was otherwise a useless pin definition) 2012-12-11 14:53:53 +01:00
Johann Rocholl 1f45cb0a51 Fix typo in MANUAL_HOME_POSITION (plural S missing) and improve comments. 2012-12-11 01:54:40 -08:00
Johann Rocholl c430906d3b Deltabot settings and configuration adjustments. 2012-12-10 00:10:56 -08:00
Johann Rocholl 42e21bb06e Add support for Printrboard (from https://github.com/lincomatic/Marlin) and Brainwave (from https://github.com/metrix/Sprinter). 2012-12-08 10:49:01 -08:00
Erik vd Zalm f934d0ef5b Merge remote-tracking branch 'tonokip/Marlin_v1' into Marlin_v1
Conflicts:
	Marlin/Configuration.h
2012-11-21 20:36:30 +01:00
Martin Lukasik 2f771b3979 Added automatic build numbering. 2012-11-12 21:06:59 +00:00
daid303 a27fef8750 Store the pre-heat constants outside of the ULTIPANEL define, so we can use them when storing EEPROM in a build without the ULTIPANEL. 2012-11-11 11:06:58 +01:00
daid303 ffc69537aa Update on some comments, make the MOTHERBOARD list complete again. 2012-11-09 09:10:51 +01:00
Jonathan Bastien-Filiatrault 46b9988e26 Search and replace failure. 2012-11-07 16:09:30 -05:00