Commit graph

7666 commits

Author SHA1 Message Date
LVD-AC 471a321624 leaner code for probe routine 2017-04-30 19:15:16 +03:00
bgort 3c0d5ba0a1 allow idle() to be called - fixes sometimes crash/hang in G29 I; (#6505) 2017-04-30 10:22:31 -05:00
Roxy-3D 2509587b5a Correct over optimization of pre-initialized variables (#6500)
* Correct over optimization of pre-initialized variables

NEAR_ZERO() works most of the time...  But it leaves corner cases
uncovered.  We need to explicitly check if these variables are +/-
infinity.

* Correct over optimization of pre-initialized variables
2017-04-29 22:01:29 -05:00
LVD-AC 585c00a728 Proposed changes
This is what I did yesterday:

- basicly gave the tests more comprehensive names; put all the
declarations at the top; got rid of the magic negative C-value (renamed
to P + A, O, T)

- "cos(RADIANS(180 + 30 * axis)) * (1 + circles * 0.1 * ((zig_zag) ? 1 :
-1)) * delta_calibration_radius" compiles wrong is zig_zag statement is
without brackets

- DELTA_TOWER_ANGLE_TRIM reset to 3 values (the calcs use the 3th value
to normalize will not compile otherwise)

-Wrote 3 dummies to keep EEPROM lenght the same

-Reset the configs to the 'original' with autocal + menu disabled (but
can be enabled of course)
2017-04-29 18:53:14 +03:00
Scott Lahteine 29fa241617 Initial patches to G33 2017-04-29 15:29:49 +03:00
Scott Lahteine 12ce051b55 Add a function to output spaces to serial 2017-04-29 15:29:49 +03:00
Scott Lahteine 42f4c53254 Starting on G33 rewrite 2017-04-29 15:29:49 +03:00
Scott Lahteine baf3b91460 DELTA_TOWER_ANGLE_TRIM only needs AB 2017-04-29 15:29:49 +03:00
Scott Lahteine 6424068412 Merge pull request #6495 from emartinez167/Spanish-language-changes
Last three Spanish language strings
2017-04-29 05:43:04 -05:00
emartinez167 27cd165adf Last three Spanish language strings
Updates as per @thinkyhead request.
2017-04-29 11:33:30 +08:00
Scott Lahteine 2cc9774f34 Apply bltouch_menu
As proffered in #6252
2017-04-28 18:43:03 -05:00
Scott Lahteine 1a111180de Clean up set_heaters_for_bltouch 2017-04-28 18:32:39 -05:00
Scott Lahteine 7db805930a Cleanup configurations 2017-04-28 18:32:39 -05:00
Scott Lahteine 8bf3a3fcdb Remove inaccurate comments from ubl.h 2017-04-28 18:32:38 -05:00
Scott Lahteine 47557d5a19 Fix up formatting in ubl.h 2017-04-28 18:32:38 -05:00
Scott Lahteine 0a8e09c723 Clean up excess whitespace, comment formatting 2017-04-28 18:32:38 -05:00
Scott Lahteine a35c681453 Clean up least_squares_fit 2017-04-28 17:33:28 -05:00
Bob-the-Kuhn 40089249c3 add PIN_EXISTS to HAS_xyz_MIN macro 2017-04-28 16:47:59 -05:00
Scott Lahteine 8020069371 Apply coding standards for indentation 2017-04-28 15:43:06 -05:00
Scott Lahteine dabca83742 Merge pull request #6437 from Kaibob2/patch-1
Update language_de.h
2017-04-28 14:47:47 -05:00
Kai 3d0a4c4ea9 Update language_de.h 2017-04-28 21:09:10 +02:00
Silvio 6bf1d50188 Added missing translations (#6458) 2017-04-28 13:49:16 -05:00
Mehmet Sutas 404f767d44 Update language_tr.h (#6463) 2017-04-28 13:48:31 -05:00
Petr Zahradnik 5e701524f8 Update language_cz.h for new translations (#6465)
* Update language_cz.h for new translations

* Correction translate

* Revert correction back to hotend
2017-04-28 13:47:43 -05:00
gege2b 0a92ce7a98 Completed french translation (#6475) 2017-04-28 13:46:09 -05:00
Ernesto Martinez ff4fb42e7d Add new strings as per recent changes in RCBugFix (#6482)
Adding missing strings to Spanish language, as per changes recently
done to the RCBugFix branch.
2017-04-28 13:45:22 -05:00
paulusjacobus 67d1fc5556 Update language_nl.h (#6478)
updated the RCbugfix release with additional Dutch translations
2017-04-28 13:42:39 -05:00
benlye 8c6b4537a6 Fix issue in itostr4sign with numbers <100 (#6487)
The first character in the string wasn't blanked if the number went from >= 100 to <100, resulting in artefacts in the displayed string.
2017-04-28 13:35:11 -05:00
LVD-AC 4ea8d0f89b Solved "The Travis CI build failed " 2017-04-28 19:55:21 +03:00
LVD-AC ed6b361e27 cleanup ready to squash 2017-04-28 18:09:18 +03:00
LVD-AC 7a6a1ef583 M666 normalize positive values to <=0
M666

+ tower radians absolute value
2017-04-28 18:05:24 +03:00
Roxy-3D 4075b95519 Allow BL-Touch users to control heaters during probe event (#6485)
The Configuration.h file entries for BL-Touch have been updated to:
```cpp
//#define BLTOUCH
//#define BLTOUCH_DELAY 375      // (ms) Enable and increase if needed
//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are
turned off during probe event
```
2017-04-28 09:19:55 -05:00
Roxy-3D 6e8ecb908a Shut down heaters during BL-Touch probe event
The electro-magnetic interference from the bed and nozzle are affecting
the BL-Touch repeatability for some users.   This problem can be helped
by shutting down the heaters during the actual probe event and then
quickly turning them back on.

Because this code is messing with the heaters, it is written in a
paranoid manner.  It only turns the heaters back on if everything is
EXACTLY as it expects things to be.  The BL-Touch probe must have been
put into a deployed state less than 20 seconds prior, or the stow()
function will NOT turn the heaters on.

This code has been tested and works for both G28 and probing functions.
2017-04-27 18:52:58 -05:00
LVD-AC d8102aeca8 Cn negative : no tower angle calibration
Giving a negative number of probe points disables the tower angle
correction calibration ('4point' instead of '7point' solution)

EEPROM version updated
2017-04-27 21:13:07 +03:00
Roxy-3D 3601f08e87 Better tuned FolgerTech i3-2020 example file 2017-04-27 11:16:38 -05:00
Roxy-3D a20b7d9581 Better tuned Example file for FolgerTech i3-2020
Also setting up Z-Probe on the machine.
2017-04-27 11:16:38 -05:00
Kai bf2fe46062 Update language_de.h 2017-04-27 10:13:02 +02:00
Kai 11d34be060 Update language_de.h 2017-04-27 10:06:26 +02:00
Scott Lahteine 817ecb9ff4 Merge pull request #6453 from thinkyhead/rc_cleanup_wednesday
Minor cleanups, work-in-progress
2017-04-26 19:41:52 -05:00
Roxy-3D 22f6e277af Get example files fully into compliance
Change to support new name GRID_MAX_POINTS_XY
Start UBL at version 1.0 in the CUSTOM_MACHINE_NAME
2017-04-26 16:22:17 -05:00
LVD-AC a9bc1d30cc z_offset change
Avoids to have to recalibrate the delta_height after a z_offset change
2017-04-26 21:57:11 +03:00
Roxy-3D ec26e23e7e Add my two 'Nice' machines as example configurations
These are my two 'Nice' machines.  Both are good example machines.  The
FolgerTech i3-2020 is probably the best value kit on the market right
now.  And it has developed a 'Cult Following' of hobbiests.  I'll always
have an up to date Configuration.h file set for it, so it may as well be
an example configuration.

And the gCreate gMax 1.5+ is the best printer I've ever seen that runs
Marlin.  For sure, I'll always have up to the minute Configuration.h
files for this printer also.   I've moved over to using the gMax as my
primary development machine for Marlin.   So...  Besides being a good
machine, it is a nice convienience for me to have this Configuration.h
file as an 'Example'.
2017-04-26 12:46:12 -05:00
Scott Lahteine adb8e68592 Fix stuck "Print Aborted" LCD message
Fixes #6393
2017-04-26 06:24:23 -05:00
Scott Lahteine 096b927102 Minor optimization of FILAMENT_WIDTH_SENSOR 2017-04-26 06:24:23 -05:00
Scott Lahteine 5bdb0b567d Cosmetic patches 2017-04-26 06:24:23 -05:00
Kai 38ae7f4238 Added more translation strings
There are some quite tricky ones which are hardly translateable.
Maybe @Sebastianv650 can review this
2017-04-26 11:58:11 +02:00
Scott Lahteine 4d96d3eab1 Bootscreen delay after clear, then set chars
Fixes #6426
2017-04-25 23:37:28 -05:00
Scott Lahteine 5512130d6c Only set Compare Mode for channel A
Fixes #6445
2017-04-25 23:14:16 -05:00
Roxy-3D d467e97679 Smart-Fill and Mesh-Tilting (both 3-point and grid) working!
Also...   The memory corruption issue may be fixed.   The GCC compiler
was inlining static functions and this caused the G29() stack frame to
become much larger than the AVR could handle.
2017-04-25 21:03:41 -05:00
Scott Lahteine a699967ec8 Merge pull request #6443 from thinkyhead/rc_interrupt_fastio
Patch fastio.h with Timer 2 interrupt support
2017-04-24 20:09:41 -05:00