0934563b97
Made the double touch portion a conditional compile based on the PROBE_DOUBLE_TOUCH flag. ============================================== Bugfix The current G38 only stopped a move if it involved the Z axis. Moved all the G38 code to it's own section and put it where it would always be executed no matter what axis was moving or if the endstop was enabled. Also added a comment to configuration_adv to alert the user the double tap had to be turned on. ============================================== Change G38 back to using Z_MIN_PROBE There's no Z_MIN endstop if Z_DUAL_ENDSTOPS is enabled and you have them set to the top of the gantry. G38 started out as using the Z_MIN_PROBE pin. I don't remember why we changed it to the Z_MIN endstop. |
||
|---|---|---|
| .. | ||
| Dual-head | ||
| Configuration.h | ||
| Configuration_adv.h | ||
| README.md | ||
Configuration for Velleman K8400 Vertex
Configuration files for the K8400, ported upstream from the official Velleman firmware. Like it's predecessor, (K8200), the K8400 is a 3Drag clone. There are some minor differences, documented in pins_K8400.h.
Single and dual head configurations provided. Copy the correct Configuration.h and Configuration_adv.h to the /Marlin/ directory.
NOTE: This configuration includes the community sourced feed rate fix. Use 100% feed rate in Repetier!
For implementation and updated K8400 firmware, see https://github.com/birkett/Velleman-K8400-Firmware
Original Sources
Credit to Velleman for the original 1.0.x based code:
http://www.vertex3dprinter.eu/downloads/files/vertex/firmware/vertex-m1-v1.4-h2.zip