Marlin-Artillery-M600/Marlin/src/pins/pins_3DRAG.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

/**
 * 3DRAG (and K8200 / K8400) Arduino Mega with RAMPS v1.4 pin assignments
 */

#ifndef BOARD_NAME
  #define BOARD_NAME "3Drag"
#endif

#ifndef DEFAULT_MACHINE_NAME
  #define DEFAULT_MACHINE_NAME "3Drag"
#endif

#ifndef DEFAULT_SOURCE_CODE_URL
  #define DEFAULT_SOURCE_CODE_URL "http://3dprint.elettronicain.it/"
#endif

//
// Heaters / Fans
//
#define RAMPS_D8_PIN        9
#define RAMPS_D9_PIN        8
#define MOSFET_D_PIN       12

#define CASE_LIGHT_PIN     -1   // MUST BE HARDWARE PWM but one is not available on expansion header

#include "pins_RAMPS.h"

//
// Limit Switches
//
#undef Z_MAX_PIN

//
// Steppers
//
#undef Z_ENABLE_PIN
#define Z_ENABLE_PIN       63

//
// Heaters / Fans
//
#define HEATER_2_PIN        6

//
// Misc. Functions
//
#undef SDSS
#define SDSS               25

#undef SD_DETECT_PIN
#define SD_DETECT_PIN      53

//
// LCD / Controller
//
#if BOTH(ULTRA_LCD, NEWPANEL)
  #undef BEEPER_PIN

  #undef LCD_PINS_RS
  #undef LCD_PINS_ENABLE
  #undef LCD_PINS_D4
  #undef LCD_PINS_D5
  #undef LCD_PINS_D6
  #undef LCD_PINS_D7
  #define LCD_PINS_RS      27
  #define LCD_PINS_ENABLE  29
  #define LCD_PINS_D4      37
  #define LCD_PINS_D5      35
  #define LCD_PINS_D6      33
  #define LCD_PINS_D7      31

  // Buttons
  #undef BTN_EN1
  #undef BTN_EN2
  #undef BTN_ENC
  #define BTN_EN1          16
  #define BTN_EN2          17
  #define BTN_ENC          23

#else

  #define BEEPER_PIN       33

#endif // HAS_SPI_LCD && NEWPANEL

/**
 *  M3/M4/M5 - Spindle/Laser Control
 *
 *  If you want to control the speed of your spindle then you'll have
 *  have to sacrifce the Extruder and pull some signals off the Z stepper
 *  driver socket.
 *
 *  The following assumes:
 *   - the Z stepper driver socket is empty
 *   - the extruder driver socket has a driver board plugged into it
 *   - the Z stepper wires are attached the the extruder connector
 *
 *  If you want to keep the extruder AND don't have a LCD display then
 *  you can still control the power on/off and spindle direction.
 *
 *  Where to get spindle signals
 *
 *      stepper signal           socket name       socket name
 *                                          -------
 *       SPINDLE_LASER_ENA_PIN    /ENABLE  O|     |O  VMOT
 *                                    MS1  O|     |O  GND
 *                                    MS2  O|     |O  2B
 *                                    MS3  O|     |O  2A
 *                                 /RESET  O|     |O  1A
 *                                 /SLEEP  O|     |O  1B
 *          SPINDLE_LASER_PWM_PIN    STEP  O|     |O  VDD
 *                SPINDLE_DIR_PIN     DIR  O|     |O  GND
 *                                          -------
 *
 *  Note: Socket names vary from vendor to vendor
 */
#undef SPINDLE_LASER_PWM_PIN    // Definitions in pins_RAMPS.h are not good with 3DRAG
#undef SPINDLE_LASER_ENA_PIN
#undef SPINDLE_DIR_PIN

#if HAS_CUTTER
  #if !EXTRUDERS
    #undef E0_DIR_PIN
    #undef E0_ENABLE_PIN
    #undef E0_STEP_PIN
    #undef Z_DIR_PIN
    #undef Z_ENABLE_PIN
    #undef Z_STEP_PIN
    #define Z_DIR_PIN                28
    #define Z_ENABLE_PIN             24
    #define Z_STEP_PIN               26
    #define SPINDLE_LASER_PWM_PIN    46   // MUST BE HARDWARE PWM
    #define SPINDLE_LASER_ENA_PIN    62   // Pin should have a pullup!
    #define SPINDLE_DIR_PIN          48
  #elif !BOTH(ULTRA_LCD, NEWPANEL)     // use expansion header if no LCD in use
    #define SPINDLE_LASER_ENA_PIN    16   // Pin should have a pullup/pulldown!
    #define SPINDLE_DIR_PIN          17
  #endif
#endif
Further cleanup of comments, partial Doxygen-style Following up on #3231 2016-03-25 07:19:46 +01:00			`/**`
Added gplv3 header to all Marlin files 2016-03-24 19:01:20 +01:00			`* Marlin 3D Printer Firmware`
Update copyright in headers 2019-02-12 22:06:53 +01:00			`* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]`
Added gplv3 header to all Marlin files 2016-03-24 19:01:20 +01:00			`*`
			`* Based on Sprinter and grbl.`
			`* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm`
			`*`
			`* This program is free software: you can redistribute it and/or modify`
			`* it under the terms of the GNU General Public License as published by`
			`* the Free Software Foundation, either version 3 of the License, or`
			`* (at your option) any later version.`
			`*`
			`* This program is distributed in the hope that it will be useful,`
			`* but WITHOUT ANY WARRANTY; without even the implied warranty of`
			`* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
			`* GNU General Public License for more details.`
			`*`
			`* You should have received a copy of the GNU General Public License`
			`* along with this program. If not, see <http://www.gnu.org/licenses/>.`
			`*`
			`*/`

Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-26 03:40:00 +01:00			`/**`
Add a ported example configuration for the Velleman K8400 (Vertex) printer. Supports both dual and single head printers (with the correct config). Includes community sourced feed rate fix. Rename / move files. Remove redundant definitions. 2016-07-02 15:32:21 +02:00			`* 3DRAG (and K8200 / K8400) Arduino Mega with RAMPS v1.4 pin assignments`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-26 03:40:00 +01:00			`*/`

Add "About Printer" information menu. Includes: firmware version / branch / date. extruder count board information (name, serial details, power supply type) thermistors (names, min/max temperatures) *printer statistics (PRINTCOUNTER details) Thanks to @thinkyhead for contributions. 2016-06-30 11:24:29 +02:00			`#ifndef BOARD_NAME`
			`#define BOARD_NAME "3Drag"`
			`#endif`

			`#ifndef DEFAULT_MACHINE_NAME`
			`#define DEFAULT_MACHINE_NAME "3Drag"`
			`#endif`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-26 03:40:00 +01:00
Add "About Printer" information menu. Includes: firmware version / branch / date. extruder count board information (name, serial details, power supply type) thermistors (names, min/max temperatures) *printer statistics (PRINTCOUNTER details) Thanks to @thinkyhead for contributions. 2016-06-30 11:24:29 +02:00			`#ifndef DEFAULT_SOURCE_CODE_URL`
			`#define DEFAULT_SOURCE_CODE_URL "http://3dprint.elettronicain.it/"`
			`#endif`

Follow-up the PR #4955, etc ・More ANALOG NUMBERING to Analog Input ・Add comment header to all the section of all the pins files ・Sort sections as follows: 1. Some special definitions (USBCON, LARGE_FLASH, etc) 2. Servos 3. Limit Switches 4. Z Probe 5. Steppers 6. Temperature Sensors 7. Heaters / Fans 8. Misc. Functions 9. LCD / Controller ・Move MAX6675_SS into "Temperature Sensors" section ・Adjust spacing 2016-10-08 22:27:04 +02:00			`//`
			`// Heaters / Fans`
			`//`
Tweak some pins formatting 2019-02-04 07:06:06 +01:00			`#define RAMPS_D8_PIN 9`
			`#define RAMPS_D9_PIN 8`
			`#define MOSFET_D_PIN 12`
Fixup pins_3DRAG based on updated RAMPS pins 2016-08-12 00:49:47 +02:00
Tweak some pins formatting 2019-02-04 07:06:06 +01:00			`#define CASE_LIGHT_PIN -1 // MUST BE HARDWARE PWM but one is not available on expansion header`
SPINDLE/LASER pins changes 2017-04-07 20:52:21 +02:00
pins_RAMPS_14.h => pins_RAMPS.h 2016-07-30 12:10:30 +02:00			`#include "pins_RAMPS.h"`
Move default machine info to pins files 2016-04-03 03:53:05 +02:00
Consistent order/formatting of pins files 2016-08-23 00:05:22 +02:00			`//`
			`// Limit Switches`
			`//`
			`#undef Z_MAX_PIN`
Fixup pins_3DRAG based on updated RAMPS pins 2016-08-12 00:49:47 +02:00
Consistent order/formatting of pins files 2016-08-23 00:05:22 +02:00			`//`
			`// Steppers`
			`//`
Fix compiler warnings - Patched up for most included configurations 2015-03-28 04:29:05 +01:00			`#undef Z_ENABLE_PIN`
Issue #1504 – K8200 Z_ENABLE_PIN - K8200 uses a non-standard RAMPS with Z_ENABLE=63 ?? - Assuming from previous input that 3DRAG is the same. 2015-02-16 06:56:23 +01:00			`#define Z_ENABLE_PIN 63`

Consistent order/formatting of pins files 2016-08-23 00:05:22 +02:00			`//`
Follow-up the PR #4955, etc ・More ANALOG NUMBERING to Analog Input ・Add comment header to all the section of all the pins files ・Sort sections as follows: 1. Some special definitions (USBCON, LARGE_FLASH, etc) 2. Servos 3. Limit Switches 4. Z Probe 5. Steppers 6. Temperature Sensors 7. Heaters / Fans 8. Misc. Functions 9. LCD / Controller ・Move MAX6675_SS into "Temperature Sensors" section ・Adjust spacing 2016-10-08 22:27:04 +02:00			`// Heaters / Fans`
			`//`
			`#define HEATER_2_PIN 6`

			`//`
			`// Misc. Functions`
Consistent order/formatting of pins files 2016-08-23 00:05:22 +02:00			`//`
Fix compiler warnings - Patched up for most included configurations 2015-03-28 04:29:05 +01:00			`#undef SDSS`
Use SD Detect Pin 53 for 3DRAG, K8200, and K8400 See #4316 2016-09-19 06:46:09 +02:00			`#define SDSS 25`

			`#undef SD_DETECT_PIN`
			`#define SD_DETECT_PIN 53`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-26 03:40:00 +01:00
Consistent order/formatting of pins files 2016-08-23 00:05:22 +02:00			`//`
			`// LCD / Controller`
			`//`
Extended condition macros (#13419) Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) \|\| PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)` 2019-03-17 05:43:06 +01:00			`#if BOTH(ULTRA_LCD, NEWPANEL)`
Rename BEEPER to BEEPER_PIN For consistency with other pins, allowing use of `PIN_EXISTS` macro. 2015-07-31 08:19:11 +02:00			`#undef BEEPER_PIN`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-26 03:40:00 +01:00
Fix compiler warnings - Patched up for most included configurations 2015-03-28 04:29:05 +01:00			`#undef LCD_PINS_RS`
			`#undef LCD_PINS_ENABLE`
			`#undef LCD_PINS_D4`
			`#undef LCD_PINS_D5`
			`#undef LCD_PINS_D6`
			`#undef LCD_PINS_D7`
Consistent order/formatting of pins files 2016-08-23 00:05:22 +02:00			`#define LCD_PINS_RS 27`
			`#define LCD_PINS_ENABLE 29`
			`#define LCD_PINS_D4 37`
			`#define LCD_PINS_D5 35`
			`#define LCD_PINS_D6 33`
			`#define LCD_PINS_D7 31`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-26 03:40:00 +01:00
			`// Buttons`
Fix compiler warnings - Patched up for most included configurations 2015-03-28 04:29:05 +01:00			`#undef BTN_EN1`
			`#undef BTN_EN2`
			`#undef BTN_ENC`
Consistent order/formatting of pins files 2016-08-23 00:05:22 +02:00			`#define BTN_EN1 16`
			`#define BTN_EN2 17`
			`#define BTN_ENC 23`
Fix compiler warnings - Patched up for most included configurations 2015-03-28 04:29:05 +01:00
			`#else`

Consistent order/formatting of pins files 2016-08-23 00:05:22 +02:00			`#define BEEPER_PIN 33`
Fix compiler warnings - Patched up for most included configurations 2015-03-28 04:29:05 +01:00
Use LCD conditionals in pins files (#14428) 2019-06-28 05:14:43 +02:00			`#endif // HAS_SPI_LCD && NEWPANEL`
SPINDLE/LASER pins changes 2017-04-07 20:52:21 +02:00
			`/**`
			`* M3/M4/M5 - Spindle/Laser Control`
			`*`
			`* If you want to control the speed of your spindle then you'll have`
			`* have to sacrifce the Extruder and pull some signals off the Z stepper`
			`* driver socket.`
			`*`
			`* The following assumes:`
			`* - the Z stepper driver socket is empty`
			`* - the extruder driver socket has a driver board plugged into it`
			`* - the Z stepper wires are attached the the extruder connector`
			`*`
			`* If you want to keep the extruder AND don't have a LCD display then`
			`* you can still control the power on/off and spindle direction.`
			`*`
			`* Where to get spindle signals`
			`*`
			`* stepper signal socket name socket name`
			`* -------`
SPINDLE_LASER_ENABLE => SPINDLE_LASER_ENA 2019-04-09 00:52:33 +02:00			`* SPINDLE_LASER_ENA_PIN /ENABLE O\| \|O VMOT`
SPINDLE/LASER pins changes 2017-04-07 20:52:21 +02:00			`* MS1 O\| \|O GND`
			`* MS2 O\| \|O 2B`
			`* MS3 O\| \|O 2A`
			`* /RESET O\| \|O 1A`
			`* /SLEEP O\| \|O 1B`
			`* SPINDLE_LASER_PWM_PIN STEP O\| \|O VDD`
			`* SPINDLE_DIR_PIN DIR O\| \|O GND`
			`* -------`
			`*`
			`* Note: Socket names vary from vendor to vendor`
			`*/`
			`#undef SPINDLE_LASER_PWM_PIN // Definitions in pins_RAMPS.h are not good with 3DRAG`
SPINDLE_LASER_ENABLE => SPINDLE_LASER_ENA 2019-04-09 00:52:33 +02:00			`#undef SPINDLE_LASER_ENA_PIN`
SPINDLE/LASER pins changes 2017-04-07 20:52:21 +02:00			`#undef SPINDLE_DIR_PIN`

Singleton for cutting tools (#14429) 2019-06-28 06:06:49 +02:00			`#if HAS_CUTTER`
SPINDLE/LASER pins changes 2017-04-07 20:52:21 +02:00			`#if !EXTRUDERS`
			`#undef E0_DIR_PIN`
			`#undef E0_ENABLE_PIN`
			`#undef E0_STEP_PIN`
			`#undef Z_DIR_PIN`
			`#undef Z_ENABLE_PIN`
			`#undef Z_STEP_PIN`
			`#define Z_DIR_PIN 28`
			`#define Z_ENABLE_PIN 24`
			`#define Z_STEP_PIN 26`
Apply spacing in pins files 2018-03-28 19:51:59 +02:00			`#define SPINDLE_LASER_PWM_PIN 46 // MUST BE HARDWARE PWM`
SPINDLE_LASER_ENABLE => SPINDLE_LASER_ENA 2019-04-09 00:52:33 +02:00			`#define SPINDLE_LASER_ENA_PIN 62 // Pin should have a pullup!`
SPINDLE/LASER pins changes 2017-04-07 20:52:21 +02:00			`#define SPINDLE_DIR_PIN 48`
Extended condition macros (#13419) Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) \|\| PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)` 2019-03-17 05:43:06 +01:00			`#elif !BOTH(ULTRA_LCD, NEWPANEL) // use expansion header if no LCD in use`
SPINDLE_LASER_ENABLE => SPINDLE_LASER_ENA 2019-04-09 00:52:33 +02:00			`#define SPINDLE_LASER_ENA_PIN 16 // Pin should have a pullup/pulldown!`
SPINDLE/LASER pins changes 2017-04-07 20:52:21 +02:00			`#define SPINDLE_DIR_PIN 17`
			`#endif`
			`#endif`