Commit graph

129 commits

Author SHA1 Message Date
Dave Johnson
2db666e99a Enable USE_ZMIN_PLUG on SCARA example (#9126) 2018-01-09 18:41:28 -06:00
GMagician
5295b4713d [2.0.x] add semitec 104NT-4 (#9119)
Table is very very similar to old 104-GT2 so I added only the name and recycled old ID
2018-01-09 16:53:12 -06:00
Scott Lahteine
8704e533da Apply FILAMENT_LOAD_UNLOAD_GCODES to example configs 2018-01-04 03:56:36 -06:00
Scott Lahteine
9312ee63b0
Merge pull request #8979 from thinkyhead/bf2_sync_up_configs
[2.0.x] Synchronize configs with 1.1.x
2017-12-31 01:15:43 -06:00
Scott Lahteine
10edb469bb Apply SLIM_LCD_MENUS to example configs 2017-12-31 00:11:21 -06:00
Scott Lahteine
0b4a46fa6c Bring configs up to date with 1.1.x 2017-12-30 23:28:53 -06:00
Scott Lahteine
7cc2193bce
Add Tronxy X1 example config (#8972) 2017-12-30 17:25:31 -06:00
Scott Lahteine
3b51f5c67e Add pause/resume action to example configs 2017-12-25 01:39:18 -06:00
Thomas Moore
f0a8a1a853 [2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8866)
* Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
2017-12-25 01:38:06 -06:00
Scott Lahteine
28fc8741d6 Reduce default jerk. XY by half. Z by 1/4 2017-12-24 19:54:11 -06:00
Scott Lahteine
1cf1cf8759 Add RADDS_DISPLAY to example configs 2017-12-24 19:00:23 -06:00
etagle
7447979110 Fixed some warnings on the MakerParts configuration, when compiling using the AVR toolchain (integer overflow on the preprocessor calculations) 2017-12-21 02:23:24 -03:00
Scott Lahteine
fdc5e72720 A single setting to validate filament width 2017-12-19 21:33:25 -06:00
Scott Lahteine
31e33d2acd Add NO_VOLUMETRICS to example configs 2017-12-19 19:51:25 -06:00
Scott Lahteine
de5ca96654 More parity with 1.1.x, plus whitespace 2017-12-19 18:36:16 -06:00
Scott Lahteine
f79026acc1 Apply MKS_12864OLED_SSD1306 to examples
Followup to #8814
2017-12-16 20:15:36 -06:00
Scott Lahteine
9abbcc3ee0 Apply ZONESTAR_LCD to example configs 2017-12-15 19:11:02 -06:00
Dave Johnson
aed0cfa3d1 Various fixes for 2.0.x configs 2017-12-15 17:09:46 -06:00
Scott Lahteine
674deaf223 Add NANODLP_ALL_AXIS to config examples 2017-12-15 16:22:56 -06:00
Scott Lahteine
2b7db90340 Bring Malyan M200 config up to date 2017-12-15 15:47:22 -06:00
teemuatlut
0cd1e91056 [2.0.x] TMC driver update (#8769) 2017-12-15 15:03:14 -06:00
Eduardo José Tagle
ac168a03c8 Fixes for the Arduino DUE HAL (Serial Port, Graphics Display, EEPROM emulation) (#8651)
* Fixing the DUE serial port assignments: Now -1 means the SAM3x USB Device emulating a serial port, and 0 means the USB to serial adapter included as a programming port

* Improving the Fast IO port access implementation on Arduino DUE

* Implemented EEPROM emulation on Due by storing data on the internal FLASH (with wear leveling)

* Implemented a Software SPI for the ST7920 graphics display for the Arduino RAMPS for DUE, as the default one in u8glib is clocking data too fast on ARM, and the display does not understand it.

* Fixing the case where the serial port selected is the USB device

* Adding configuration for the Makerparts 3D printer (www.makerparts.net)

* Tuned MakerParts acceleration on X and Y axis so it never loses steps. Also adjusted pulses per mm to match default hw configuration

* Fine tuned Maximum acceleration for MakerParts printer

* Style cleanup

* Style cleanup (2)

* Style fixes (3)

* Fixing the DUE serial port assignments: Now -1 means the SAM3x USB Device emulating a serial port, and 0 means the USB to serial adapter included as a programming port

* Improving the Fast IO port access implementation on Arduino DUE

* Implemented EEPROM emulation on Due by storing data on the internal FLASH (with wear leveling)

* Implemented a Software SPI for the ST7920 graphics display for the Arduino RAMPS for DUE, as the default one in u8glib is clocking data too fast on ARM, and the display does not understand it.

* Fixing the case where the serial port selected is the USB device

* Adding configuration for the Makerparts 3D printer (www.makerparts.net)

* Tuned MakerParts acceleration on X and Y axis so it never loses steps. Also adjusted pulses per mm to match default hw configuration

* Fine tuned Maximum acceleration for MakerParts printer

* Style cleanup

* Style changes to u8g_dev_st7920_128_64_sw_spi.cpp

* Even more improvements to the FastIO HAL for DUE. Now WRITE() is 2 ASM instructions, if value is constant, and 5 cycles if value is not constant. Previously, it was 7..8 cycles

* After some problems and debugging, seems we need to align the interrupt vector table to 256 bytes, otherwise, the program sometimes stops working

* Moved comments out of macro, otherwise, token pasting does not properly work sometimes

* Improved Software SPI implementation on DUE: Now it honors the selected speed passed to spiInit(). This allows much faster SDCARD access, improving SDCARD menus and reducing latency

* Update u8g_dev_st7920_128_64_sw_spi.cpp

* Disabling EEPROM over FLASH emulatiion if an I2C or SPI EEPROM is present
2017-12-12 17:51:36 -06:00
victorpv
a5150c83a2 [2.0.x] Multiple updates to STM32F1 HAL (#8733)
* STM32F1 HAL

Adding files for STM32F1 HAL based on libmaple/stm32duino core.
Current persistent_store uses cardreader changes to be sent in separate
commit, but could be changed to use i2c eeprom.
There is another persistent_store implementation that uses the MCU flash memory
to emulate eeprom
Adding readme with some information about the stm32 HAL.

* Switch to Timer4 to avoid a hard reset on STM32F103C6 boards

On bluepill STM32F103C6 boards, using Timer5 results in a error() vector call. Switch to 4 since these are both general purpose, 16 bit timers.

* Add support for EEPROM emulation using Flash

Some low end machines doe not have EEPROM support. Simulate it using the last two pages of flash. Flash does not allow rewrite between erases, so skip writing the working version if that's enabled.

* Basic Pins for a malyan M200

This is a work in progress to go hand in hand with the STM32 work.

* Add support for ADC with DMA. This work has exposed a problem with the pin enumerations in STM boards vs what marlin expects (i.e, try defining PA0 as a temp pin). The hack can be removed with we go to fastio completely. To see this work, set something in adc_pins to a value like PA0 and connect your pullup resistor'd thermistor.

* Missing file - change HAL_adc_init to actually do something

We have an actual ADC init function now.

* Remove pinmode hack

Remove the pin mode hack that I was using to init PA0.

Updated Readme.md

* Several changes to timers and GPIO

Faster GPIO, and faster timer functions by accesing registers and
libmaple.
Still more changes pending for the Timer's code to skip using the
HardwareTimer class altogether.

Switch all enums to be within #defines

This change allows a user to have, for instance, TEMP_4 and TEMP_BED definied but nothing else. The enums which are not defined move "out", allowing the first ones to take the slots in the enum, and since the array is sized on ADC_PIN_COUNT, we always have the right size data and in order.

* Update Malyan M200 pins

Update Malyan M200 pins with correct fan values.

* Test all pins on actual hardware, update definitions

Some of the pin definitions were from knowlege base/pdfs. Now they've been tested against actual hardware. This should be very close to final.

* Update HAL_timers_Stm32f1.cpp

* Add sample configurations for Malyan M200

Add sample configuration for Malyan M200 without bed leveling, and move fan to auto cool E0 since this printer by default has only one fan.


Choose the timer based on MCU defintion. Timer5 is not valid on C8/CB class boards, so use Timer4 for the step timer.


readme.md update

* Updates to timers, and some stm32 boards definitiions

* Correct pin toggle macro.

* Remove duplicated Malyan M200 entry from pins.h

* Update configuration_store.cpp

* Formatting, indentation

* Formatting in HAL_Stm32f1.cpp
2017-12-10 23:12:45 -06:00
Scott Lahteine
69d49a2438 Shorter segments may be better 2017-12-09 06:29:14 -06:00
Roxy-3D
f58eb391aa [2.0.0] Better off mesh behavior for UBL (#8714)
* Better off mesh behaviour for UBL

* Suggested ubl.h changes
2017-12-08 19:00:59 -06:00
Scott Lahteine
d7800e7975 Apply MULTIPLE_PROBING to example configs 2017-12-07 16:44:12 -06:00
Richard Wackerbarth
c1184552ac Change K1 to required option PID_K1 2017-12-05 19:59:59 -06:00
Bob-the-Kuhn
bb23286383 add README & modify spi_pins.h
still trying to fix file name
2017-12-03 20:00:56 -06:00
Scott Lahteine
967522b95e
Merge pull request #8615 from dot-bob/Duplicator_6-2.0.x
[2.0.x] Example configurations for Wanhao Duplicator 6
2017-12-03 03:37:48 -06:00
Scott Lahteine
aa7efb96bf Bring configurations up to date 2017-12-02 21:50:51 -06:00
Scott Lahteine
082ab8fcab Add SKEW_CORRECTION to example configs 2017-12-01 19:22:27 -06:00
dot-bob
bd45d0363d Add default configurations for the Wanhao Duplicator 6. 2017-11-30 23:24:33 -07:00
Roxy-3D
94e6b2976e
Restore correct G26 values for gMax 1.5+ printer 2017-11-30 18:12:17 -06:00
Scott Lahteine
8f90642eea LED_CONTROL_MENU config changes 2017-11-29 21:02:56 -06:00
Tannoo
cf0f78336b New Feature: LED_CONTROL_MENU 2017-11-29 21:02:55 -06:00
Scott Lahteine
7c61bcb058 Apply SEGMENT_LEVELED_MOVES to example configs 2017-11-29 16:57:31 -06:00
Scott Lahteine
a67cf78c6b Clean up whitespace, spacing 2017-11-26 20:18:52 -06:00
Scott Lahteine
7be4857ab9 Tweak BLOCK_BUFFER_SIZE description 2017-11-26 17:36:40 -06:00
Scott Lahteine
9badf5dc0d Fix Micromake C1 config 2017-11-25 18:41:07 -06:00
Scott Lahteine
d24b1190bd Don't use Z_MIN_PROBE_ENDSTOP on DELTA 2017-11-24 18:24:22 -06:00
Scott Lahteine
5926c9c97b Followup for MESH_EDIT_GFX_OVERLAY 2017-11-24 15:53:25 -06:00
Scott Lahteine
dc82babe8e Implement NANODLP_Z_SYNC for 2.0.x 2017-11-24 00:28:06 -06:00
Scott Lahteine
5ce7f23afa Config option G26_MESH_VALIDATION for all meshes 2017-11-23 21:43:23 -06:00
Scott Lahteine
bd8bcf06e7 Updates to Anet A8 configurations
Based on #8426
2017-11-16 23:19:36 -06:00
Scott Lahteine
54774841ba
Merge pull request #8416 from thinkyhead/bf2_M114_DETAIL
[2.0] Add M114_DETAIL to Configuration_adv.h
2017-11-14 00:28:55 -06:00
Scott Lahteine
009e3a7aa7 Add M114_DETAIL to Configuration_adv.h 2017-11-14 00:03:17 -06:00
Scott Lahteine
3f0a982b8c Move Filament Width Sensor to Configuration_adv.h 2017-11-13 21:05:57 -06:00
Scott Lahteine
b76e173205 Move test extrusion options under G26 2017-11-13 21:05:57 -06:00
Roxy-3D
faaae7a1b2
Provide more clearance for BL-Touch probe 2017-11-12 13:11:22 -06:00
LVD-AC
e334efb2a7 PROBE_MANUALLY etc. 2017-11-10 19:27:33 -06:00