Scott Lahteine
68b866b5dd
Add M155 - Auto-report temperature with interval
2016-11-09 02:32:58 -06:00
Scott Lahteine
75bfde9945
M155=>M260, M156=>M261
2016-11-08 17:54:54 -06:00
Scott Lahteine
dcfd7c69e8
Merge pull request #5163 from nzinov/RCBugFix
...
Improve G30 probing command - add optional arguments
2016-11-07 11:37:13 -06:00
Scott Lahteine
e765eebfb0
Patch spacing in bilinear grid report
2016-11-07 04:08:25 -06:00
Scott Lahteine
1864b282c5
Implement reversed CORE options
2016-11-05 23:47:51 -05:00
Nikolay Zinov
dea00bbcf1
improve G30 probing
...
Add optional parameters
X, Y for probe point
S sets stowing on and off
2016-11-05 13:22:45 +03:00
Scott Lahteine
176aeafc19
Don't define bilinear_line_to_destination on kinematic setups
2016-11-03 14:10:07 -05:00
Scott Lahteine
236853df22
Corrections to bilinear_line_to_destination
...
- Allow more than 9x9 probe points
- Account for the probe starting position
2016-11-03 04:43:59 -05:00
Scott Lahteine
0115e495fe
Fix up Dual X switch blocks
2016-11-02 21:38:50 -05:00
Scott Lahteine
2495ab7af2
Make dual_x_carriage_mode an enumeration
2016-11-02 21:38:49 -05:00
Scott Lahteine
d6c36f5bb9
Fix Z raise with DXC_AUTO_PARK_MODE
2016-11-02 21:36:50 -05:00
Scott Lahteine
0c79553fc5
Cast int to AxisEnum for some accessors
2016-11-02 17:42:24 -05:00
Scott Lahteine
adbf1f7dca
Add M355 to the GCodes list.
2016-11-02 16:43:52 -05:00
Scott Lahteine
63efc10599
Merge pull request #5134 from thinkyhead/rc_bilinear_split_lines
...
Split cartesian moves on grid boundaries with bilinear ABL
2016-11-02 16:14:55 -05:00
Scott Lahteine
ee5b8d6dc8
Split moves on grid boundaries with bilinear ABL on cartesian
2016-11-01 08:25:47 -05:00
Scott Lahteine
66744a6076
Merge pull request #5133 from thinkyhead/rc_M355_case_light
...
M355 Case light
2016-11-01 07:51:27 -05:00
Scott Lahteine
955d14acb0
Patch photo pin code style
2016-11-01 06:30:14 -05:00
Stanley
ab3f966f5f
Case light G-code M355
...
implemented G-Code M355 into Marlin
2016-11-01 06:30:14 -05:00
Sebastianv650
f9bea7968f
BugFix for incorrect E-speed calculation
...
The extrusion speed was wrong due to a not high enough precision of
esteps to XY steps, therefore now the target float values are used to
calculate the ratio between XY movement and extrusion speed.
The e_speed_multiplier8 was replaced by an absolute multiplier called
abs_adv_steps_multiplier8, therefore one multiplication and bitshift can
be saved inside the stepper ISR. Due to this, also extruder_advance_k is
better suited inside the planner and not the stepper files any more.
2016-11-01 08:08:47 +01:00
Scott Lahteine
ff3a8ca0d1
Use NUM_DIGITAL_PINS instead of custom DIO_COUNT
2016-10-31 08:08:03 -05:00
Scott Lahteine
04a1fac029
Some cleanup to M43
2016-10-31 08:08:03 -05:00
Bob-the-Kuhn
c7f1f0dae6
Add endstop monitor & make pins report pretty
2016-10-31 08:08:02 -05:00
Scott Lahteine
396434a445
Fix compiler warning in M145
2016-10-28 20:57:36 -05:00
Scott Lahteine
07bfc45df8
Adjust spacing in gcode_M149
2016-10-28 20:57:36 -05:00
Scott Lahteine
1a2310c494
Make LCD preheat vars an array to reduce code size
2016-10-28 20:57:36 -05:00
Scott Lahteine
50ee749082
Centralize click-handling in the LCD loop
2016-10-28 20:57:21 -05:00
Scott Lahteine
47ad97c35e
Merge pull request #5109 from thinkyhead/rc_eeprom_M218_tool_offset
...
Save hotend_offset array (M218) in EEPROM
2016-10-28 20:08:29 -05:00
Scott Lahteine
67ab54185b
Save hotend_offset array (M218) in EEPROM
2016-10-28 18:45:23 -05:00
MagoKimbra
dfcdbb437b
Fix Command M420
2016-10-28 20:53:48 +02:00
Scott Lahteine
c34dbfb248
Merge pull request #5072 from thinkyhead/rc_preset_auto_fans
...
Add predefined AUTO_FAN_PINs to pins files
2016-10-27 17:12:11 -05:00
Scott Lahteine
c4c53856a4
Merge pull request #5094 from esenapaj/Fix-for-the-PR-#5088
...
Fix for the PR #5088 (Handle M108 in M1 also with ULTIPANEL)
2016-10-26 21:51:18 -05:00
esenapaj
d5a5042d23
Fix for the PR #5088 (Handle M108 in M1 also with ULTIPANEL)
2016-10-27 10:32:20 +09:00
Scott Lahteine
3f94b15cef
Fix bilinear grid constraints
...
Followup to #5090
2016-10-26 18:11:26 -05:00
Scott Lahteine
ada935de87
Allow TEMP_STAT_LEDS with only one LED defined
2016-10-26 17:51:26 -05:00
Scott Lahteine
f0d673561f
Fix for bilinear grid outside bounds
2016-10-26 05:00:03 -05:00
Scott Lahteine
1ba1ec0db9
Handle M108 in M1 also with ULTIPANEL
2016-10-25 23:25:47 -05:00
Greg Cormier
f0aed9dac7
Fix #4995 - M48/G29 on CoreXY maybe others?
2016-10-22 20:45:13 -04:00
Scott Lahteine
3544c3632f
Merge pull request #5062 from thinkyhead/rc_warnings_fix
...
Warnings fixed redux
2016-10-22 12:21:36 -05:00
Josef Pavlik
0bd66807b2
fixed warning: extra ;
2016-10-22 11:12:29 -05:00
Scott Lahteine
5f5a55a0de
Add a ZERO macro to clear arrays
2016-10-22 10:07:18 -05:00
Scott Lahteine
2783dcb4cc
Save some RAM in MBL's G29
2016-10-22 02:52:56 -05:00
esenapaj
385bd8a4a3
Fix freezing and MINTEMP Error with MAX31855 thermocouple
2016-10-16 07:33:14 +09:00
Scott Lahteine
ca7275a67a
Disable EXTRAPOLATE_FROM_EDGE by default
2016-10-14 14:44:28 -05:00
Scott Lahteine
e7cf566fc5
Do kinematic segments with buffer_line_kinematic
...
This breaks the raw option, but in the future perhaps all planner moves
will be sent in raw form instead of logical.
2016-10-10 17:14:03 -05:00
Scott Lahteine
a10e81dc2a
Minor cleanup of set_bed_leveling_enabled
2016-10-10 17:14:03 -05:00
Scott Lahteine
029824bc49
Patch ADJUST_DELTA macro for SCARA
2016-10-10 17:14:03 -05:00
Scott Lahteine
d963020532
Sort out some header dependencies
2016-10-10 17:14:03 -05:00
Scott Lahteine
a07033a6c1
Merge pull request #4974 from esenapaj/Follow-up-the-PR-#4955
...
Fix and follow-up the PR #4955 (PINS_DEBUGGING and M43: Read pin states), etc
2016-10-10 13:27:52 -05:00
Scott Lahteine
f8199b2cc1
Merge pull request #4982 from thinkyhead/rc_abl_bugfix
...
Fix planner with kinematics, delta ABL
2016-10-10 13:24:22 -05:00
esenapaj
00456b0cb3
Fix compilation errors
2016-10-10 14:22:43 +09:00
Scott Lahteine
e4e290d957
Make EXTRUDER_RUNOUT_PREVENT kinematic compatible
2016-10-09 15:58:33 -05:00
Scott Lahteine
847429eff4
Make tool_change kinematic compatible
2016-10-09 15:58:32 -05:00
Scott Lahteine
a4a7ca10ca
Make USE_DELTA_IK_INTERPOLATION compatible with ABL
2016-10-09 15:58:32 -05:00
Scott Lahteine
c5cac486f5
Use a, b, c instead of lx, ly, lz
2016-10-09 14:34:24 -05:00
Josef Pavlik
f8c2473a71
Improve planner kinematics, fix delta ABL
2016-10-09 13:32:46 -05:00
Scott Lahteine
e4d2662d81
Use some macros in M48
2016-10-09 12:21:05 -05:00
Scott Lahteine
ee01def16d
Merge pull request #4955 from thinkyhead/rc_debug_pins
...
PINS_DEBUGGING and M43: Read pin states
2016-10-07 14:47:34 -05:00
Scott Lahteine
e21bab5243
PINS_DEBUGGING and M43 Read Pins
2016-10-07 14:11:48 -05:00
Scott Lahteine
48e63c4730
Comment some globals
2016-10-06 22:06:33 -05:00
Scott Lahteine
9a6c66602f
Fix formatting of extrapolate debug output
2016-10-06 17:04:22 -05:00
Scott Lahteine
cd77eb5c40
Clear grid for bilinear G29
2016-10-06 17:00:53 -05:00
Scott Lahteine
53a0856f5c
Print Y as int in print_bed_level
2016-10-06 16:46:54 -05:00
Brian
357854a7ef
tweak variables;
2016-10-05 19:49:05 -04:00
Brian
48cf19151a
Improve M48 output; Add min, max, range, etc.
2016-10-05 16:09:39 -04:00
Scott Lahteine
e6164d254d
Clean up GCode command short comments
2016-10-05 06:13:30 -05:00
Scott Lahteine
0c0deb5194
Common pin_is_protected function
2016-10-05 04:41:27 -05:00
Scott Lahteine
46839c222a
Comment and clean up some vars
2016-10-04 23:40:45 -05:00
Scott Lahteine
8910bb7c97
Fix buzzer conditional compile
2016-10-04 21:38:41 -05:00
Scott Lahteine
de7e798e6f
Replace single-char S_ECHOs with S_CHAR
2016-10-04 21:38:41 -05:00
Scott Lahteine
0e83f34174
Tweak debugging of probe_pt
2016-10-04 21:38:00 -05:00
Scott Lahteine
ca26011e3c
Merge pull request #4941 from MagoKimbra/rc_fix_M205
...
Add note for M205
2016-10-04 03:21:20 -05:00
Scott Lahteine
9485aa8f13
Include negative Z probe offset in clearance move
2016-10-03 16:18:04 -05:00
Scott Lahteine
5c1eb595e6
Fix for G2/G3 negative radius
...
As suggested in #4940
2016-10-03 14:48:44 -05:00
MagoKimbra
7b37539fe7
Add note for M205
2016-10-03 08:54:15 +02:00
Scott Lahteine
d5f598cd82
Tweak probe debug, add newline
2016-10-02 17:35:40 -05:00
Scott Lahteine
d19cfcfc1d
max_jerk array, DEFAULT_XYJERK => DEFAULT_[XY]JERK
2016-10-02 06:34:56 -05:00
Scott Lahteine
e7dc174f30
More detailed debugging of G28 delta
2016-10-02 02:18:57 -05:00
Scott Lahteine
bad8899ebc
Merge pull request #4900 from thinkyhead/rc_g38_changes
...
Cleanup of G38.2 / G38.3
2016-10-01 06:57:17 -05:00
Scott Lahteine
73ce3a61c7
Cleanup, comment zigzag
2016-10-01 05:21:52 -05:00
Scott Lahteine
919fe3e4b8
Rename feature to G38_PROBE_TARGET
2016-10-01 05:00:53 -05:00
Scott Lahteine
a2864ab7fe
Patched up, cleaned up
2016-10-01 05:00:53 -05:00
Bob-the-Kuhn
2911aa7ffa
code changes to implement G38 commands
...
1) modified 3 code files
Marlin.h
Marlin_main.cpp
endstops.cpp
2) modified config files so I could test on my machine
Testing was done on an AzteegX3pro based machine.
The probe was hooked to the Z_MIN endstop.
My controller doesn't have a dedicated Z_PROBE input so I couldn't test
that functionality.
Verified that a large file (without any G38 commands) executed the same
before and after the changes.
Verified that the head moves as expected when G38.2 and G38.3 commands
are issued. Single & multiple axis moves were tested along with + and -
directions.
Code was added to the main ISR. In normal operation only one extra IF
statement is evaluated. I didn't notice any performance degradation
because of the added code.
The G38 commands are expected to be issued manually by the operator
during machine setup. The G38 commands wait until the machine is idle
before proceeding. That way the other commands are minimally impacted
by the extra ISR overhead when a G38 command is in the queue.
The G38 commands are very similar to the G28 commands except 1) only the
Z_PROBE is used and movement can be in the + or - direction.
See issue 4677 for a discussion on adding G38 commands to Marlin.
Feature request: add ability to use G38.2 command (CNC)
MarlinFirmware/Marlin#4677
2016-10-01 05:00:53 -05:00
Scott Lahteine
74d048e77e
Merge pull request #4927 from thinkyhead/rc_bltouch_noraise
...
Don't check Z_MAX on raise when the probe pwns the pin
2016-10-01 04:52:56 -05:00
Scott Lahteine
4afa293289
Say "BLTOUCH" in machine info report
2016-09-30 17:13:27 -05:00
Scott Lahteine
2d2c9bdf92
Add PROBE_Y_FIRST option for probe order
2016-09-29 02:00:27 -05:00
Scott Lahteine
c8c57e59fc
Patch the end of G29 to sync plan position
2016-09-29 02:00:27 -05:00
Scott Lahteine
81b8c9f8ec
Add XY parameters to G29 for mesh dimensions
2016-09-29 02:00:27 -05:00
Scott Lahteine
56cf674150
M420 can now enable/disable ABL
2016-09-29 02:00:26 -05:00
Scott Lahteine
06790977c4
Use updated position methods
2016-09-29 01:31:05 -05:00
Scott Lahteine
e8f2604a6f
Patch print_bed_level numbering
2016-09-29 01:31:05 -05:00
Scott Lahteine
d066610514
Patch up bilinear_z_offset
2016-09-29 01:31:05 -05:00
Scott Lahteine
850e38d013
G30 will only disable bed leveling
2016-09-29 01:31:04 -05:00
Scott Lahteine
510ef5d14a
Standard function to turn bed leveling on/off
2016-09-29 01:27:37 -05:00
Scott Lahteine
2febd8ec82
Double-touch debugging
2016-09-29 01:27:37 -05:00
Scott Lahteine
b331077c32
Use stepper.get_axis_position_degrees
2016-09-29 01:27:37 -05:00
Scott Lahteine
0d9efb24f3
Fix up bilinear_z_offset
2016-09-29 01:26:22 -05:00
Scott Lahteine
8b46eb3766
Fix bilinear interpolation
2016-09-27 03:18:49 -05:00
Scott Lahteine
5100bdac81
Improve Bilinear Grid
...
- Extrapolate properly for even numbered grid points
- Extrapolate using average, not median
- Improve bilinear grid report output
- Add debug output for bilinear extrapolation
- Add option to extrapolate from edge, not center
2016-09-27 00:03:19 -05:00
Scott Lahteine
a3e91ec65e
Add 'Q' option to G29 when debug leveling is on
2016-09-27 00:03:19 -05:00
Scott Lahteine
1fceda4fb0
Add leveling type and details to machine_info
2016-09-27 00:03:19 -05:00