Commit graph

5617 commits

Author SHA1 Message Date
Scott Lahteine
f60b4f8659 Allow case light pin to be active low 2016-12-01 23:32:34 -06:00
Scott Lahteine
3f4c02e42f Merge pull request #5259 from Sebastianv650/Allow_UART-ISR_inside_Stepper
Allow UART ISRs inside the stepper ISR
2016-12-01 23:17:42 -06:00
Scott Lahteine
d07229f185 Fix redraw in SD Card menus 2016-12-01 18:15:58 -06:00
Scott Lahteine
47b4b21308 Merge pull request #5331 from esenapaj/Fix-for-the-PR-#5072
Fix for the PR #5072 (Add predefined AUTO_FAN_PINs to pins files), etc
2016-12-01 13:37:02 -06:00
Scott Lahteine
8d14420331 Fix compile without ENABLE_LEVELING_FADE_HEIGHT 2016-12-01 11:37:24 -06:00
Scott Lahteine
415294801f Merge pull request #5330 from thinkyhead/rc_rgb_led
Support for an RGB LED using 3 pins
2016-11-30 14:14:00 -06:00
esenapaj
0909cf3d46 Adjust spacing 2016-11-30 19:39:39 +09:00
esenapaj
8e9e9c17b0 Follow-up the PR #5323 (Adding ukrainian language support)
・Update forgotten Configuration_adv.h of Felix\DUAL and K8400\Dual-head
2016-11-30 19:39:39 +09:00
esenapaj
d92ce8849b Fix for the PR #5072 (Add predefined AUTO_FAN_PINs to pins files), etc
・Make descriptions the same as others
2016-11-30 19:39:38 +09:00
Scott Lahteine
e00b380489 Merge pull request #5323 from akaJes/lang-ua
Adding ukrainian language support
2016-11-30 01:10:40 -06:00
Scott Lahteine
65c50e062e Support for an RGB LED using 3 pins 2016-11-30 00:02:31 -06:00
esenapaj
3047f3c85c Suppress warning 2016-11-30 00:32:56 +09:00
jes
f674246397 extend Configurations files 2016-11-29 15:04:36 +02:00
jes
c90191faaf adding ukrainian laguage support 2016-11-29 14:49:45 +02:00
Sebastianv650
912704a0d8 Enable ISRs inside temperature ISR
to capture chars at UART at 250000 baud.
2016-11-28 20:08:50 +01:00
Sebastianv650
f62f4006af Account for LCD improvements in ENSURE_SMOOTH_MOVES
.. and give the hint to try lower values if possible.
2016-11-28 17:44:19 +01:00
Scott Lahteine
092e949b58 Merge pull request #5169 from thinkyhead/rc_core_inverted
Support for COREYX, COREZX, COREZY
2016-11-28 02:26:41 -06:00
Scott Lahteine
e9e4208ff1 Merge pull request #5274 from Sebastianv650/improve_smooth_moves
Improvement for ENSURE_SMOOTH_MOVES
2016-11-28 02:22:08 -06:00
Scott Lahteine
c7935bb0d2 Merge pull request #5299 from thinkyhead/rc_bed_correction_fade
Add a fade factor for mesh leveling
2016-11-28 02:07:51 -06:00
Scott Lahteine
a69b1ee691 Merge pull request #5313 from thinkyhead/rc_fix_menu_actions
Keep drawing menu unless screen changes
2016-11-28 02:01:39 -06:00
Scott Lahteine
32ee3acf86 Merge pull request #5315 from thinkyhead/rc_fixup_material_menus
Refine material heatup menu items
2016-11-28 01:46:51 -06:00
Scott Lahteine
c70a06daf1 lcd_save_previous_menu => lcd_save_previous_screen 2016-11-28 01:46:18 -06:00
Scott Lahteine
13ea43cc8d Only exit menu handler when the screen changes 2016-11-28 01:46:18 -06:00
Scott Lahteine
f45b6a7762 Merge pull request #5314 from thinkyhead/case_light_menu_fix
Fix and optimize case-light code
2016-11-28 01:45:27 -06:00
Scott Lahteine
59fafb93b2 Merge pull request #5304 from AnHardt/pixel-shifting
MENU_HOLLOW_FRAME for the menu screens
2016-11-28 01:41:47 -06:00
Scott Lahteine
0951d385ce Don't set heater temperature above its maximum 2016-11-28 01:37:24 -06:00
Scott Lahteine
c9193e856d Limit preheat parameters based on all nozzles 2016-11-28 01:37:24 -06:00
Scott Lahteine
bb4529f7d2 PLA / ABS => Material 1 / 2 2016-11-28 01:37:24 -06:00
Scott Lahteine
61437d988a Fix and optimize case-light code 2016-11-28 01:34:52 -06:00
AnHardt
7a9fa78822 MENU_HOLLOW_FRAME for the menu screens
MENU_HOLLOW_FRAME for the menu screens and
some pixel shifting to optimize the look with tall fonts. (cn)
2016-11-27 22:59:05 +01:00
AnHardt
24ca1a6289 Not more then 4 stripes for u8g-devices
To optimise speed.
Costs well invested 128Byte of RAM.
2016-11-26 19:08:33 +01:00
Scott Lahteine
aee71c543e Minor formatting in language.h 2016-11-26 06:53:52 -06:00
Scott Lahteine
05d8d189f6 Adjust spacing in utf_mapper.h 2016-11-26 06:53:52 -06:00
Scott Lahteine
5460a529da Add option DOGM_SPI_DELAY_US 2016-11-26 06:53:52 -06:00
Scott Lahteine
71842b6a17 Apply const to LCD arguments and locals 2016-11-26 06:53:52 -06:00
Scott Lahteine
b1abd7edef Optimize graphical display with selective rendering 2016-11-26 06:53:52 -06:00
AnHardt
b91fab2d7d Fix USE_BIG_EDIT_FONT 2016-11-26 13:50:25 +01:00
Scott Lahteine
4cd73e183d Hide hidden files and folders 2016-11-26 06:26:28 -06:00
Scott Lahteine
f6f77d34a1 Add a fade factor for mesh leveling 2016-11-26 03:41:26 -06:00
AnHardt
75fdcc14b7 Activate font and mapper for el-gr 2016-11-26 02:30:37 +01:00
AnHardt
a0004e7cd3 Change font decent to -1 for tt and gr
For speeding up font drawing unify font decent.
Tr and Gr have ben the only fonts with a font decent of -2.
Sorry for some, a bit compressd, but hopefully still readeble symbols.
2016-11-26 02:29:23 +01:00
Scott Lahteine
307f263f89 Merge pull request #5292 from esenapaj/Update-Japanese-translation
Update Japanese translation
2016-11-25 16:56:49 -06:00
esenapaj
7070143042 Update Japanese translation
・Add new translation
2016-11-24 21:10:40 +09:00
esenapaj
ef97645002 Follow-up the PR #5255 (Case light menu (3rd attempt)) 2016-11-24 19:42:05 +09:00
Scott Lahteine
2a9b3376a9 Merge pull request #5289 from thinkyhead/rc_which_menu_actions
Drop "static" keyword in ultralcd.cpp function declarations
2016-11-23 23:04:05 -06:00
Scott Lahteine
b97dafe4b8 Drop "static" keyword in ultralcd.cpp function declarations 2016-11-23 20:43:01 -06:00
Scott Lahteine
2e966f8e5b Patch Capabilities Report for "PROGRESS" 2016-11-23 19:31:46 -06:00
Scott Lahteine
f60321d3e3 Merge pull request #5284 from thinkyhead/rc_turkish_update
Turkish update (squashed)
2016-11-23 14:57:52 -06:00
Mehmet Sutas
a26668b10c Add UTF8 Turkish Translation 2016-11-23 14:19:16 -06:00
Mehmet Sutas
61aa796307 Added Human Readable Comments 2016-11-23 14:19:16 -06:00
Mehmet Sutas
6fb9c6fe07 Follow-up for #5167 Turkish Language
Add check for Turkish Font before setting better font for graphic displays
2016-11-23 14:19:15 -06:00
Scott Lahteine
d891324830 Merge pull request #5258 from mosh1/mbl_speed_fix
Fix z feedrate value when doing mesh bed leveling. probe feedrate use…
2016-11-23 14:15:01 -06:00
Scott Lahteine
7f8133a51f Merge pull request #5255 from Kaibob2/CaseLightMenu
Case light menu (3rd attempt)
2016-11-23 13:46:33 -06:00
Kai
e9b42f4f47 Update language_de.h 2016-11-23 19:29:19 +01:00
Kai
0c341f0c50 Added Menu entry for Case light 2016-11-23 19:29:15 +01:00
Scott Lahteine
3bc2273ac9 Comment M540 2016-11-21 18:08:00 -06:00
Scott Lahteine
14b74181f5 Merge pull request #5179 from thinkyhead/rc_TMC2130
TMC2130 "Silent StepStick" support
2016-11-21 14:10:52 -06:00
Scott Lahteine
bb2114a060 Merge pull request #5264 from thinkyhead/rc_delta_safe_zone
Add an option for delta to home to the top
2016-11-21 13:56:44 -06:00
Scott Lahteine
38466b1d2f Merge pull request #5271 from esenapaj/Fix-for-the-PR-#5267
Fix for thePR #5267 (Introduce a +1234.56 format for over 999 steps/mm)
2016-11-21 13:55:56 -06:00
Scott Lahteine
9b96a4a53b Merge pull request #5246 from thinkyhead/rc_some_cleanup
Minor stepper cleanup
2016-11-21 13:55:25 -06:00
Sebastianv650
8190483eeb Improvement for ENSURE_SMOOTH_MOVES
Instead of waiting for a single long block, compare the complete block
buffer runtime for the long_move() check.
2016-11-21 17:58:24 +01:00
esenapaj
da67037550 Fix for thePR #5267 (Introduce a +1234.56 format for over 999 steps/mm)
・Fix memory leak
2016-11-21 22:31:01 +09:00
Scott Lahteine
0f891e848b Merge pull request #5268 from esenapaj/Update-Japanese-translation
Update Japanese translation
2016-11-21 03:18:36 -06:00
esenapaj
190a04c467 Update Japanese translation
・Change translation for 16 width LCD
2016-11-21 17:51:43 +09:00
esenapaj
7b836a4000 Introduce a +1234.56 format for over 999 steps/mm 2016-11-21 17:45:07 +09:00
Scott Lahteine
3e0376b45e Reorder M114 and M119 gcode cases 2016-11-21 00:52:19 -06:00
Scott Lahteine
644fac5d34 Reduce all stepper_indirection init code with macros 2016-11-21 00:52:18 -06:00
Scott Lahteine
4e4f37b6c2 Code formatting for TMC and L6470 config options 2016-11-21 00:52:18 -06:00
Scott Lahteine
127e21ae00 Extend M122 for all steppers 2016-11-21 00:52:18 -06:00
Scott Lahteine
bf5f5f44cc Make TMC2130 init code auto-configure
Simply apply enabled settings instead of requiring users to edit
stepper_indirection.cpp
2016-11-21 00:52:17 -06:00
Moritz
d67c1d825f Add TMC2130 support 2016-11-21 00:17:45 -06:00
Scott Lahteine
11effeee2c Add an option for delta to home to the top 2016-11-20 23:12:07 -06:00
Sebastianv650
50059690e0 Allow UART ISRs inside the stepper ISR
If the stepper ISR takes too long, chars are lost which leads to serial
communication errors like "Line number not +1" or "Wrong checksum". In
worst case, the printer can even do crazy moves.

With this changes, UART interrupts are handled inside the stepper ISR.
This way, no chars should be lost.
2016-11-20 13:09:12 +01:00
Moshen Chan
29b174bfb9 Fix z feedrate value when doing mesh bed leveling. probe feedrate uses XY_PROBE_SPEED 2016-11-19 16:34:41 -08:00
AnHardt
88b38eafd8 Endstop interrupt refinement
At the start of a move, check if the endstops are already triggered.
The 'change' interrupts will not see a change if already triggered.
2016-11-19 13:30:49 +01:00
Scott Lahteine
79c8591192 Merge pull request #5253 from thinkyhead/rc_smooth_move_ex-lax
Ensure smooth print moves even with LCD enabled
2016-11-19 01:38:41 -06:00
Scott Lahteine
0215cacb30 Merge pull request #5247 from esenapaj/Re-follow-the-PR-#4634
Re-follow the PR #4634 (Set language display charset in language.h)
2016-11-19 01:32:40 -06:00
Scott Lahteine
2cc32d85a3 Adjust ENSURE_SMOOTH_MOVES coding style 2016-11-19 01:28:48 -06:00
Scott Lahteine
072541f286 Update ENSURE_SMOOTH_MOVES in all configs 2016-11-19 01:28:47 -06:00
Sebastianv650
de89dc9f04 Ensure smooth print moves even with LCD enabled
lcd_update can take so much time that the block buffer gets drained if
there are only short segments. This leads to jerky printer movements for
example in circles and a bad print quality.

This change implements a simple check: Only if the block currently
executed is long enough, run lcd_update.
This also means the printer will not show actual values on the LCD nor
will it respond to buttons pressed. A option that keeps the menu
accessible is also available.
Aditionaly, slow down if a block would be so fast that adding a new
block to the buffer would take more time. In this case, the buffer would
drain until it's empty in worst case.
2016-11-19 01:28:47 -06:00
Scott Lahteine
87b6b19256 Patch CASE_LIGHT typo 2016-11-18 23:49:12 -06:00
Scott Lahteine
0be6167f14 Merge pull request #5250 from CONSULitAS/RCBugFix_K8200_backinsync_2016-11-18
K8200: Example configuration back in sync
2016-11-18 22:49:18 -06:00
Scott Lahteine
eb714ee873 Move dummy thermistor opts, fix redundant sensor comment 2016-11-18 22:24:48 -06:00
Scott Lahteine
7a99c6ce4f Reformat temp sensor listing 2016-11-18 22:24:47 -06:00
Scott Lahteine
181cdb3cfe Move GCode list above include lines 2016-11-18 22:24:46 -06:00
Scott Lahteine
25d0c167bd More detailed static_assert messages 2016-11-18 22:24:46 -06:00
Scott Lahteine
eb120e518c Followup to new endstop interrupts feature
- Fix typos, verbiage
- Fix naming of `setup_endstop_interrupts`
- Some formatting, indentation, spacing
2016-11-18 21:53:45 -06:00
Scott Lahteine
832fe284b4 Merge pull request #5184 from AnHardt/endstop_interrupts
Introduce endstop interrupts
2016-11-18 20:50:24 -06:00
CONSULitAS
cbae44df64 K8200: Example configuration back in sync
Configuration.h: back in sync, new features configured
Configuration_adv.h: back in sync, new features configured
README.md: text updated
2016-11-18 22:55:02 +01:00
esenapaj
5db3738fe7 Re-follow the PR #4634 (Set language display charset in language.h) 2016-11-18 17:44:49 +09:00
Scott Lahteine
6eb6f12c64 Patch up some language formatting 2016-11-18 01:16:58 -06:00
Bo Herrmannsen
8cffa60cc5 Update to Danish language 10/11-2016 2016-11-18 01:16:57 -06:00
Scott Lahteine
98600e1433 Minor stepper cleanup 2016-11-18 01:15:57 -06:00
Florian Heilmann
d08867986e Add autotemp capabilities to M104
This allows M104 to pass the F and B parameters to enable autotemp as well
2016-11-17 11:28:19 -06:00
Sebastianv650
c11b2bb777 Bugfix LIN_ADV
Advance has nothing todo with Z_AXIS, strange copy&paste error?
2016-11-17 11:28:19 -06:00
Scott Lahteine
ee0765e872 Merge pull request #5233 from esenapaj/Update-Japanese-translation
Update Japanese translation
2016-11-17 03:38:19 -06:00
Scott Lahteine
2330619da0 Merge pull request #5191 from petrzjunior/const
Replace const bool with #define for consistency
2016-11-17 03:37:32 -06:00
esenapaj
b278b7a395 Update Japanese translation
Only adjust spacing
2016-11-17 09:05:51 +09:00
Petr Zahradník junior
d7ce5d271b
Replace const bool with #define for consistency 2016-11-16 18:55:21 +01:00
Scott Lahteine
d63230d73e Merge pull request #5192 from Kaibob2/patch-7
Printer Stats / Completed prints line doesn't fit in display (when german)
2016-11-16 00:16:36 -06:00
Scott Lahteine
548b45026d Merge pull request #5214 from Sebastianv650/RCBugFix_planner_opt
Save some cycle inside the planner
2016-11-16 00:06:55 -06:00
Scott Lahteine
5d23e52d75 Merge pull request #5228 from thinkyhead/rc_keep_last_mix
Fix DIRECT_MIXING_IN_G1 to preserve the previous mix
2016-11-15 19:12:01 -06:00
Scott Lahteine
db47aa983d Merge pull request #5226 from mtowara/RCBugFix
bump -std in Makefile to c++11
2016-11-15 16:13:32 -06:00
Scott Lahteine
99b0c1fe56 Fix DIRECT_MIXING_IN_G1 to preserve the previous mix 2016-11-15 16:12:26 -06:00
Markus Towara
23a675f621 reduce binary size of .hex
still a few bytes bigger than with arduino but nothing major
2016-11-15 21:57:15 +01:00
Markus Towara
5b6e2cecf5 bump c/c++ standard to gnu11
needed for constexpr
2016-11-15 21:54:12 +01:00
Scott Lahteine
410657b050 Fix G30 with limits, print correct probe XY 2016-11-15 14:10:28 -06:00
AnHardt
f3eee02596 Introduce endstop interrupts
If ENDSTOP_INTERRUPTS_FEATURE is enabled this tries to set up interrupt routines
for all used endstop pins. If this worked without errors, `endstops.update()` is called
only if one of the endstops changed its state.

The new interrupt routines do not really check the endstops and react upon them. All what they
do, is to set a flag if it makes sense to call the endstop test we are used to.

This can be used on:
* ARM (DUE) based boards - all pins can raise interrupts,
* RAMPS - all 6 endstop pins plus some other on EXT-2 can raise interrupts,
* RAMPS based boards - as long the designers did not change the pins for the endstops or at least left enough,
* all boards, if there are enough pins that can raise interrupts, and you are willing/able to swap with pins dedicated to other purpose.
2016-11-15 12:07:41 +01:00
Sebastianv650
e3ffb58fbd Save some cycle inside the planner
planner.h:
fan speed is used to set integer variables, so no need for long.
Basicaly a byte should be enough for all the fan things, as it's 0-255?

planner.cpp:
Save some float multiplications.
We could squeeze out even more by defining feedrate_percentage,
saved_feedrate_percentage and flow_percentage as float instead of int.
Everytime they are used in the time-critical planner, they are casted to
float and multiplied by 0.01. Not done jet, as they are used in LCD menu
functions I don't know well enough.
2016-11-13 13:34:12 +01:00
Scott Lahteine
665b7f3893 Merge pull request #5212 from thinkyhead/rc_mixing_faster
Store mix factors as reciprocals and multiply
2016-11-12 18:47:11 -06:00
Scott Lahteine
60cc9342a4 Merge pull request #5188 from thinkyhead/rc_extended_host_support
Extended host support: M155 Auto temp report, M115 capabilities
2016-11-12 15:38:06 -06:00
Scott Lahteine
f663220e87 Store Mix factors as reciprocals and multiply 2016-11-12 15:19:18 -06:00
Scott Lahteine
ea3c08d249 Merge pull request #5186 from esenapaj/Follow-up-the-PR-#5167-etc
Follow up the PR #5167 (Add Turkish Language) again, etc
2016-11-12 13:11:54 -06:00
Scott Lahteine
c488378532 Merge pull request #5205 from Sebastianv650/RCBugFix_stepperpatch
Remove useless line from stepper ISR
2016-11-12 12:43:07 -06:00
Michael Neumann
8bdf303da0 Update pins_MEGATRONICS_3.h 2016-11-12 12:26:07 +01:00
Michael Neumann
3890366c83 Update pins.h 2016-11-12 12:25:45 +01:00
Michael Neumann
c0d45ca7f2 Update boards.h 2016-11-12 12:24:47 +01:00
Sebastianv650
cdc18f8c22 Remove useless line from stepper ISR
The flag is already set inside planner.get_current_block(). Doing it
twice isn't making it better..
2016-11-11 19:35:03 +01:00
Kai
8e8b4398f3 Printer Stats / Completed prints line doesn't fit in display (when german) 2016-11-09 22:03:25 +01:00
Scott Lahteine
b31a07e261 Stateful M355 with separate P parameter 2016-11-09 03:28:18 -06:00
Scott Lahteine
3c9a838651 Extended capabilities report in M115 2016-11-09 02:32:58 -06:00
Scott Lahteine
68b866b5dd Add M155 - Auto-report temperature with interval 2016-11-09 02:32:58 -06:00
Scott Lahteine
68b46fb2c9 Allow send to i2c address 0 (broadcast) 2016-11-08 17:54:55 -06:00
Scott Lahteine
75bfde9945 M155=>M260, M156=>M261 2016-11-08 17:54:54 -06:00
esenapaj
2ae72b0491 Follow up the PR #5167 (Add Turkish Language) again, etc
・Update forgotten K8400\Dual-head\Configuration.h
・Adjust spacing
2016-11-09 06:31:21 +09:00
Scott Lahteine
06f2282f82 Merge pull request #5176 from thinkyhead/rc_filchange_feedback
Give instant feedback for filament change
2016-11-07 12:11:54 -06:00
Scott Lahteine
dcfd7c69e8 Merge pull request #5163 from nzinov/RCBugFix
Improve G30 probing command - add optional arguments
2016-11-07 11:37:13 -06:00
Scott Lahteine
e765eebfb0 Patch spacing in bilinear grid report 2016-11-07 04:08:25 -06:00
Scott Lahteine
7780052fb3 Give instant feedback for filament change 2016-11-07 03:48:16 -06:00
esenapaj
24e3f7abe7 Update Turkish translation
・Add new translation
2016-11-07 04:59:18 +09:00
esenapaj
be48792e9c Follow up the PR #5167 (Add Turkish Language), etc
・Remove all the #ifndef
・Follow the PR #4603 (Strip never-translated strings from language
files)
・Follow the PR #4634 (Set language display charset in language.h)
・Follow the PR #4936 (Put max_jerk vars in array, clean up jerk code)
・Adjust spacing
2016-11-06 23:59:02 +09:00
Scott Lahteine
1864b282c5 Implement reversed CORE options 2016-11-05 23:47:51 -05:00
Scott Lahteine
e3c8318504 Add reversed CORE options 2016-11-05 23:47:46 -05:00
Rigid3D
2327764980 Add Turkish Language 2016-11-05 21:06:16 -05:00
Nikolay Zinov
dea00bbcf1 improve G30 probing
Add optional parameters
X, Y for probe point
S sets stowing on and off
2016-11-05 13:22:45 +03:00
Scott Lahteine
00662b8635 Minor babystep cleanup patches 2016-11-03 23:31:45 -05:00
Scott Lahteine
cad792e702 Reduce code for invariant lcd_detected 2016-11-03 23:31:45 -05:00
Scott Lahteine
b23d255491 Move macros above Stepper::babystep 2016-11-03 23:31:45 -05:00
Scott Lahteine
cc57d46158 Fix set_position for CoreYZ 2016-11-03 23:31:45 -05:00
Scott Lahteine
0269347682 Merge pull request #5141 from thinkyhead/rc_old_slowdown_what
OLD_SLOWDOWN does nothing, so remove it
2016-11-03 23:30:43 -05:00
Scott Lahteine
e92e2b2446 Merge pull request #5144 from Sebastianv650/RCBugFix_LIN_ADV_wipe
Account for wipe moves
2016-11-03 23:19:25 -05:00
Scott Lahteine
176aeafc19 Don't define bilinear_line_to_destination on kinematic setups 2016-11-03 14:10:07 -05:00
Sebastianv650
d448500643 Account for moves with negative E movements
Added a rule so that LIN_ADVANCE isn't used for moves with negative E movements (de_float will be negative in this cases).
I also added a more detailed comment to make it more clear what the if statement does.
2016-11-03 17:01:17 +01:00
Scott Lahteine
236853df22 Corrections to bilinear_line_to_destination
- Allow more than 9x9 probe points
- Account for the probe starting position
2016-11-03 04:43:59 -05:00
Scott Lahteine
0115e495fe Fix up Dual X switch blocks 2016-11-02 21:38:50 -05:00
Scott Lahteine
2495ab7af2 Make dual_x_carriage_mode an enumeration 2016-11-02 21:38:49 -05:00
Scott Lahteine
d6c36f5bb9 Fix Z raise with DXC_AUTO_PARK_MODE 2016-11-02 21:36:50 -05:00
Scott Lahteine
0c79553fc5 Cast int to AxisEnum for some accessors 2016-11-02 17:42:24 -05:00
Scott Lahteine
adbf1f7dca Add M355 to the GCodes list. 2016-11-02 16:43:52 -05:00
Scott Lahteine
63efc10599 Merge pull request #5134 from thinkyhead/rc_bilinear_split_lines
Split cartesian moves on grid boundaries with bilinear ABL
2016-11-02 16:14:55 -05:00