thinkyhead
f59c0ab842
[cron] Bump distribution date (2020-04-14)
2020-04-14 00:08:34 +00:00
InsanityAutomation
6ce0c94d12
Fix bad comparison ( #17470 )
...
* Suggested message change
* Fix Bad Comparison
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-04-13 17:23:54 -05:00
Scott Lahteine
e9c8da35c5
Subcall overflow error message
2020-04-13 14:54:51 -05:00
Scott Lahteine
421825259e
Shorter M32 error message
2020-04-13 14:54:50 -05:00
Scott Lahteine
e6ccec17a6
Expose SD_PROCEDURE_DEPTH in config
2020-04-13 14:54:50 -05:00
Scott Lahteine
22da1b2b31
Rename some "kill" messages
2020-04-13 14:54:50 -05:00
thinkyhead
a7a76f123d
[cron] Bump distribution date (2020-04-13)
2020-04-13 00:03:48 +00:00
Scott Lahteine
e3321920f3
Update Marlin website links to https
2020-04-12 17:21:14 -05:00
Scott Lahteine
f090a927f4
Reapply BLTouch deploy/stow patch
...
- Fixes #14328
- Originally #14352
- Reverted in 2580104
2020-04-12 15:16:43 -05:00
Scott Lahteine
ac7b484703
Safe homing: Raise Z on G28 Z ( #17501 )
...
Co-Authored-By: RFBomb <robbery525@gmail.com>
2020-04-12 14:58:58 -05:00
Scott Lahteine
a2e9a02429
Fix PLR when card isn't mounted yet
...
Fixes a regression from 9bff67bc74
2020-04-12 14:44:45 -05:00
Gustavo Alvarez
7894937737
Update Spanish language ( #17505 )
2020-04-12 14:12:08 -05:00
Scott Lahteine
4cdd51cd3a
Apply TERN to status screen
2020-04-12 13:28:07 -05:00
Gustavo Alvarez
37752bd8bb
Update Spanish language ( #17465 )
2020-04-12 01:35:30 -05:00
dandantsui
333092c488
Fix MKS Robin infinite boot ( #17497 )
2020-04-12 01:23:08 -05:00
Scott Lahteine
2493cf0364
Fix M1001 with HAS_LEDS_OFF_FLAG
2020-04-12 01:22:10 -05:00
Scott Lahteine
7aed32df00
Fix SD_FINISHED_RELEASECOMMAND bug
...
Fixes #17401 bug that was introduced in 8f26c3a
2020-04-11 22:08:37 -05:00
Ryan
a97ae51cc7
Archim: PIO upload on Windows, Arduino IDE LCD ( #17405 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-04-11 20:39:02 -05:00
Scott Lahteine
e4903396d4
Fix up pausing / parking display ( #17460 )
2020-04-11 20:36:17 -05:00
thinkyhead
dfb5968bfe
[cron] Bump distribution date (2020-04-12)
2020-04-12 00:03:21 +00:00
Roxy-3D
07c9dc4142
Make pid_debug_flag match declaration in M303.cpp
...
Get it right this time!
2020-04-11 11:03:04 -05:00
Roxy-3D
a65198882f
Make declaration of PID_debug_flag match M303.cpp
2020-04-11 10:25:19 -05:00
thinkyhead
8647d6b8d8
[cron] Bump distribution date (2020-04-11)
2020-04-11 00:03:20 +00:00
Scott Lahteine
48919c54fb
Add SRAM command injection ( #17459 )
2020-04-09 20:05:58 -05:00
thinkyhead
7af0da7f93
[cron] Bump distribution date (2020-04-10)
2020-04-10 00:03:54 +00:00
Scott Lahteine
c2bd9dd4f5
Show "Pausing…" during pause
2020-04-09 18:09:54 -05:00
Marcio T
dbdfe61644
Fix and improve FTDI Eve Touch UI ( #17426 )
2020-04-09 16:00:25 -05:00
Gustavo Alvarez
5158106c12
Update Spanish translation ( #17406 )
2020-04-09 13:35:32 -05:00
Scott Lahteine
3645e59893
Minor style tweaks
2020-04-09 12:31:33 -05:00
Scott Lahteine
71a4ab3331
Add "Settings Stored" message
2020-04-09 12:31:33 -05:00
thinkyhead
556406a127
[cron] Bump distribution date (2020-04-09)
2020-04-09 00:02:53 +00:00
studiodyne
a1523d6419
Fix: const needed for operator* ( #17443 )
2020-04-08 15:00:31 -05:00
Scott Lahteine
3ea23712eb
Fix stepper DAC compile
...
Fixes #17438
2020-04-08 14:17:29 -05:00
Scott Lahteine
d6badb77a4
Clean up whitespace
2020-04-08 14:04:51 -05:00
grauerfuchs
293a0997c9
Fix / optimize PCA9533 LED (Mightyboard) ( #17381 )
2020-04-08 12:53:28 -05:00
thinkyhead
079644d012
[cron] Bump distribution date (2020-04-08)
2020-04-08 00:02:57 +00:00
thinkyhead
e1fc6f7e25
[cron] Bump distribution date (2020-04-07)
2020-04-07 00:03:10 +00:00
thisiskeithb
966e0e4a77
BTT002 release V1 uses STM32F407VGT6 ( #17387 )
2020-04-06 15:51:09 -05:00
Tor-p
d6f39a69af
Fix G76 probe height / position ( #17392 )
2020-04-06 15:32:06 -05:00
thinkyhead
1d81bb7a2b
[cron] Bump distribution date (2020-04-06)
2020-04-06 00:02:56 +00:00
Brais Fortes
c47feb1cfe
Update Galician language ( #17418 )
2020-04-05 18:36:27 -05:00
Scott Lahteine
fad9235cd8
Move MSG_x_LINE to multi_language.h
2020-04-05 18:25:59 -05:00
Scott Lahteine
07b3f38269
First SD status change is silent
2020-04-04 23:51:20 -05:00
Giuliano Zaro
86a3efda6f
Update Italian language ( #17407 )
2020-04-04 20:51:05 -05:00
thinkyhead
da0f63cd1c
[cron] Bump distribution date (2020-04-05)
2020-04-05 00:02:50 +00:00
Scott Lahteine
0e06aaa2bc
Add millis helper macros
2020-04-04 02:48:30 -05:00
Scott Lahteine
723d4d6f61
Fix Archim 2 build for PIO
2020-04-04 02:18:33 -05:00
Scott Lahteine
65f6a373b0
Refactor SD detect handler ( #17380 )
...
Co-Authored-By: Eric Ptak <trouch@users.noreply.github.com>
2020-04-04 00:08:25 -05:00
InsanityAutomation
bc01d8d023
Toolchange touchup ( #17395 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-04-03 19:17:05 -05:00
thinkyhead
ed0799d653
[cron] Bump distribution date (2020-04-04)
2020-04-04 00:03:24 +00:00
Ben
df8b7dfc40
Various Laser / Spindle improvements ( #15335 )
2020-04-02 19:31:08 -05:00
thinkyhead
e7e9304819
[cron] Bump distribution date (2020-04-03)
2020-04-03 00:03:31 +00:00
Scott Lahteine
2b9d2dce16
Apply GRID_LOOP
2020-04-02 14:33:04 -05:00
Marcio T
be0e313c07
Touch UI additions, bug fixes ( #17379 )
2020-04-02 14:24:55 -05:00
Scott Lahteine
11ce281694
Followup to #17351
2020-04-02 13:32:59 -05:00
Scott Lahteine
9f86dde195
Clean up UI declarations, apply TERN_
2020-04-02 01:31:03 -05:00
Scott Lahteine
f263782f1b
Fix ESP32 eeprom flag
2020-04-01 23:51:33 -05:00
Scott Lahteine
62e8c2dd87
Fix up 'system' includes
2020-04-01 23:51:09 -05:00
Scott Lahteine
514afddeb4
Minor code cleanup
2020-04-01 19:48:58 -05:00
Scott Lahteine
7f5dc7b919
More 8 extruders (TMC) support
2020-04-01 19:46:21 -05:00
thinkyhead
c47bdae9f2
[cron] Bump distribution date (2020-04-02)
2020-04-02 00:03:23 +00:00
Simon Jouet
192c7c27b9
Fix extra TMC serial begin calls ( #17351 )
2020-04-01 16:20:38 -05:00
Marcelo Castagna
178ca2bcdf
Fix M710 report formatting ( #17356 )
2020-03-31 19:13:37 -05:00
thinkyhead
5236889377
[cron] Bump distribution date (2020-04-01)
2020-04-01 00:03:36 +00:00
Scott Lahteine
e7f020f3f2
Shorten some internal pin names
2020-03-31 14:43:01 -05:00
Marcio T
d83ad6f321
Improve / fix FTDI EVE Touch UI ( #17338 )
...
- Fix timeout and debugging string
- Fix check for whether `LCD_TIMEOUT_TO_STATUS` is valid
- Fix incorrect debugging message
- Make capitalization of callbacks consistent.
- Allow Touch UI to use hardware SPI on Einsy boards
- Move print stats to About Printer page.
- More generic about screen with GPL license.
- Add missing handler for power loss event
- Less code duplication on status screen and main/advanced menu; more legible
- Reorganize advanced and main menu to add more features
- Hide home Z button when using Z_SAFE_HOMING
- Fix compilation errors when certain features enabled
- Fix missing labels in UI
- Improve color scheme
- Add new preheat menus
- Fix incorrect rendering of Marlin logo on boot
- Add Level X Axis and Auto calibrate buttons
2020-03-31 14:22:04 -05:00
Tanguy Pruvot
c759729478
STM32F1: Restore M43 build support ( #17336 )
2020-03-31 14:13:20 -05:00
Scott Lahteine
e0e87ca19a
Fix last arc segment
...
Co-Authored-By: ellensp <ellensp@hotmail.com>
2020-03-31 12:50:48 -05:00
Scott Lahteine
528907cb16
Additional TERN macros
2020-03-31 12:50:48 -05:00
Scott Lahteine
96ab16a9dd
Pulldown for all FastIO headers
...
Co-Authored-By: borsegbr <borsegbr@users.noreply.github.com>
2020-03-31 12:37:22 -05:00
thinkyhead
0ea26d538b
[cron] Bump distribution date (2020-03-31)
2020-03-31 00:03:22 +00:00
thinkyhead
747a4bb623
[cron] Bump distribution date (2020-03-30)
2020-03-30 00:03:19 +00:00
Scott Lahteine
9b886c2ad4
Load balance some tests
2020-03-29 18:14:15 -05:00
Scott Lahteine
223aa5cc4e
No unscaled_e_move for CNC
2020-03-29 17:20:26 -05:00
Scott Lahteine
d029a09810
Minor HAL cleanup
2020-03-29 17:14:23 -05:00
Scott Lahteine
765a9f3471
do_pause_e_move => unscaled_e_move
2020-03-29 16:26:55 -05:00
Scott Lahteine
fc11e72174
Fix extra unskew call
...
Fixes #17264
2020-03-29 16:11:03 -05:00
oscarsan1
b35dc5f0b4
Fix Trigorilla 1.4 missing spaces
2020-03-29 13:46:03 -05:00
thinkyhead
fc74c6a7b6
[cron] Bump distribution date (2020-03-29)
2020-03-29 00:03:23 +00:00
Roxy-3D
2f7e5cf7dd
Fix typo...
2020-03-28 09:53:04 -05:00
Scott Lahteine
747b964295
Clean up user-wait, SD completion ( #17315 )
2020-03-28 03:18:53 -05:00
Scott Lahteine
a84990961a
Simplify TWIBus debug
2020-03-28 01:20:15 -05:00
Scott Lahteine
53fe572bbd
Limited backlash editing with Core kinematics ( #17281 )
2020-03-27 22:00:27 -05:00
InsanityAutomation
de648bfdc1
Add Funmat HT V4.0 board support ( #17305 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-03-27 21:08:47 -05:00
thinkyhead
e71b25a555
[cron] Bump distribution date (2020-03-28)
2020-03-28 00:03:16 +00:00
Mathias Rasmussen
8752fbd92c
Store case light brightness in EEPROM ( #17307 )
2020-03-27 17:38:28 -05:00
InsanityAutomation
bed41af868
Fix Stepper PWM menu ( #17298 )
2020-03-27 17:30:17 -05:00
Giuliano Zaro
129b270628
QSPI EEPROM for SAMD51 ( #17292 )
2020-03-27 17:29:17 -05:00
InsanityAutomation
3655e240f5
Fix SD finished ExtUI / host action ( #17285 )
2020-03-27 16:06:39 -05:00
thinkyhead
98ef161bfe
[cron] Bump distribution date (2020-03-27)
2020-03-27 00:03:27 +00:00
Scott Lahteine
54a12ee1d6
Tweak eeprom storage type
2020-03-25 21:07:08 -05:00
Scott Lahteine
d6a4c3079d
Tweak ui.finish_status
2020-03-25 21:07:08 -05:00
Giuliano Zaro
8122468a36
Update Italian language ( #17293 )
2020-03-25 21:05:36 -05:00
Acenotass
5c150c0c94
Update Russian language ( #17290 )
2020-03-25 21:04:57 -05:00
Scott Lahteine
5ec1a8bb2b
Fix M0 unused var warning
2020-03-25 20:27:21 -05:00
Scott Lahteine
dd6781217a
motion.cpp: HAS_DIST_MM_ARG
2020-03-25 19:21:48 -05:00
Scott Lahteine
0175189c34
Allow G2_PWM to be slimmer
2020-03-25 19:18:42 -05:00
Scott Lahteine
adb6334ba0
Use "dist" instead of "delta" for clarity
2020-03-25 19:18:42 -05:00
thinkyhead
4dea020050
[cron] Bump distribution date (2020-03-26)
2020-03-26 00:03:54 +00:00
Scott Lahteine
c86ee574ec
Drop old comment
2020-03-25 15:11:12 -05:00
Scott Lahteine
f2ed18d150
M303 followup
...
- Put 'D' before other params for clean exit.
- Use serial on/off for debug status.
2020-03-25 15:08:52 -05:00
Roxy-3D
1986e1cdf8
Allow PID_DEBUG to be turned on and off ( #17284 )
...
M303 D will now toggle activation of PID_DEBUG output. This allows the debug capability to be built into the firmware, but turned on and off as needed.
2020-03-24 19:38:09 -05:00
thinkyhead
0aeee64cca
[cron] Bump distribution date (2020-03-25)
2020-03-25 00:03:18 +00:00
Roxy-3D
075a86b076
Update LCD timing on Formbot T-Rex 2+ machines
...
The code is slightly more optimized than it used to be and this has caused the setup and hold times on the Formbot T-Rex 2+ machines to be insufficient. This change gives sufficient margin and the LCD Display is clean again.
2020-03-24 17:15:03 -05:00
Roxy-3D
5d515c3a2f
Adjust for timing shift on Max7219 displays on AVR's
...
Something has shifted. The previous timing delays on the Max7219 debug displays is too tight without this correction.
I suspect something has been optimized and roughly 50ns of needed setup and hold time has disappeared.
This corrects the issue and the display results are clean again.
2020-03-24 17:08:31 -05:00
Scott Lahteine
68face848a
Sanity check CONTROLLERFAN_SECS
2020-03-24 16:41:21 -05:00
Scott Lahteine
7455bb09b3
Add SoftwareSerialM for MKS Robin ( #17207 )
2020-03-24 16:14:30 -05:00
ellensp
41e944da00
Fix Emergency Parser on DUE ( #17276 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-03-24 15:14:52 -05:00
MarkMan0
4113481c4e
Fix limits on acceleration editing ( #17280 )
2020-03-24 15:13:37 -05:00
mkpfalz
3260228009
Sanity-check CORE backlash axes ( #17279 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-03-24 14:08:55 -05:00
rado79
bef9b9b07e
Delay after homing_backoff for CoreXY sensorless homing ( #17273 )
2020-03-23 20:32:36 -05:00
thinkyhead
edd6f6c5f2
[cron] Bump distribution date (2020-03-24)
2020-03-24 00:03:08 +00:00
Scott Lahteine
c87d73045b
Fix extra M114 output line
...
Fixes #17255
2020-03-23 18:31:26 -05:00
George Fu
e3ebbe25e0
DGUS updates ( #17260 )
2020-03-23 18:00:22 -05:00
ellensp
cd4060a99c
Add USB serial support to SERIAL_PORT_2 on DUE ( #17245 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-03-23 17:55:21 -05:00
Scott Lahteine
adb7a88428
Fix an unused var warning
2020-03-23 17:35:43 -05:00
Scott Lahteine
580d314fbe
Skip impossible PWM sanity-checks
2020-03-23 17:35:43 -05:00
Scott Lahteine
fe154fa5de
Fix CONTROLLER_FAN options compile
2020-03-23 17:35:43 -05:00
RasmusAaen
717c216851
Fix Copymaster Y_MAX pin ( #17267 )
2020-03-23 17:34:38 -05:00
thinkyhead
27c281eec3
[cron] Bump distribution date (2020-03-23)
2020-03-23 00:03:08 +00:00
Scott Lahteine
e7a9f17371
Tweak serial port descriptions
2020-03-21 23:38:44 -05:00
Scott Lahteine
2460a3dfbb
Fix custom version file include
2020-03-21 23:34:19 -05:00
Scott Lahteine
2c325c2a7d
Format some pins files
2020-03-21 21:18:46 -05:00
Scott Lahteine
e62b52da99
Use pin/port names for CHITU pins
2020-03-21 21:18:46 -05:00
Scott Lahteine
7988e31f5e
whitespace
2020-03-21 21:16:15 -05:00
thinkyhead
29874b21b6
[cron] Bump distribution date (2020-03-22)
2020-03-22 00:03:15 +00:00
Scott Lahteine
04cea864bc
Split up STM32 pins files ( #17212 )
2020-03-20 23:45:00 -05:00
thinkyhead
3151856e98
[cron] Bump distribution date (2020-03-21)
2020-03-21 00:03:28 +00:00
thinkyhead
1738c13bc2
[cron] Bump distribution date (2020-03-20)
2020-03-20 00:03:07 +00:00
George Fu
71db5c1605
Fix FYSETC mini 12864 init / glitches ( #17209 )
2020-03-19 14:11:55 -05:00
thinkyhead
14daf1ee5e
[cron] Bump distribution date (2020-03-19)
2020-03-19 00:03:40 +00:00
InsanityAutomation
84dec5da10
Add M42 M, improve M43 ( #17173 )
2020-03-18 16:12:51 -05:00
Scott Lahteine
de45ac41ad
Implement CONTROLLER_FAN_USE_Z_ONLY
...
Followup to #17149
2020-03-18 14:36:40 -05:00
Erkan Colak
83eec683c9
New Controller Fan options and M710 gcode ( #17149 )
2020-03-18 13:41:12 -05:00
Scott Lahteine
abea6d5787
Tweak some lambdas
2020-03-18 10:33:15 -05:00
thinkyhead
252178fe62
[cron] Bump distribution date (2020-03-18)
2020-03-18 00:04:28 +00:00
RasmusAaen
c768605bde
Add Copymaster3D board ( #17188 )
2020-03-17 15:25:10 -05:00
Joe Prints
1f5824247f
More decimal places for babystep / Z probe offset ( #17195 )
2020-03-17 15:12:52 -05:00
Scott Lahteine
e8205af6fb
Apply HAS_TMC_UART to pins files
2020-03-17 15:06:01 -05:00
Karl Andersson
e5dcab8fd2
ARMED support for TMC UART, probe temp ( #17186 )
2020-03-17 15:05:12 -05:00
ellensp
40922c7da7
Fix MKS SBASE 1.6 E1 heater pin ( #17191 )
2020-03-17 14:51:57 -05:00
thinkyhead
c1672220fd
[cron] Bump distribution date (2020-03-17)
2020-03-17 00:04:33 +00:00
Scott Lahteine
f6e80d576d
Fix Z_MIN_PROBE_PIN on SKR 1.4 ( #17187 )
2020-03-16 17:49:33 -05:00
Scott Lahteine
b14c933171
LPC1768 EEPROM fallback to flash, add overrides ( #17184 )
2020-03-16 15:59:05 -05:00
Pascal de Bruijn
2fc0df1b39
Shorter LCD remaining time to prevent overlap ( #17181 )
2020-03-16 14:11:55 -05:00
thinkyhead
a662079cbc
[cron] Bump distribution date (2020-03-16)
2020-03-16 00:04:45 +00:00
InsanityAutomation
775a4294fc
Configurable SLOWDOWN divisor ( #17171 )
2020-03-15 18:29:18 -05:00
Giuliano Zaro
3b987dfcec
Fix G34 Z lower, extra "BLTOUCH" debug line ( #17175 )
2020-03-15 18:23:24 -05:00
Scott Lahteine
c39873759f
Fix Z after ABL Bilinear G29 with fade
...
Co-Authored-By: Alan T <interstellarmisfit@users.noreply.github.com>
2020-03-15 18:18:38 -05:00
Karl Andersson
85187290a7
Fix incorrect type on ubl_storage_slot ( #17170 )
2020-03-15 18:03:10 -05:00
Scott Lahteine
695e014075
Do later mounting of LCD-based SD
2020-03-14 19:24:35 -05:00
Scott Lahteine
090a90a036
Add EEPROM_BOOT_SILENT option
2020-03-14 19:24:35 -05:00
Scott Lahteine
095a1123c1
Add a global machine state
2020-03-14 19:24:35 -05:00
Scott Lahteine
41ffe9851d
Fix LCD progress bar
...
Fixes #17162
2020-03-14 19:24:33 -05:00
thinkyhead
5c1970a229
[cron] Bump distribution date (2020-03-15)
2020-03-15 00:04:39 +00:00
Roxy-3D
9f85165101
Allow Tool Offset adjustments to have another digit of precision
...
Some of the items in the Tool Offset Adjustment menu (in particular, the Z Offset!!!) were only adjustable with .1mm accuracy.
This is not enough. So the edit menu is switched to float52 to fix the issue.
2020-03-14 18:12:29 -05:00
Scott Lahteine
8b2d55e345
Config version 020005
2020-03-13 23:22:46 -05:00
InsanityAutomation
cee07f3f6b
Quad Z leveling, G34 (R)ecalculate ( #17122 )
2020-03-13 23:22:04 -05:00
Scott Lahteine
118bd2f8b2
Apply loop shorthand macros ( #17159 )
2020-03-13 23:18:16 -05:00
Scott Lahteine
a96be32fae
Fix G26 corrupted position
2020-03-13 19:27:02 -05:00
thinkyhead
983a8cee45
[cron] Bump distribution date (2020-03-14)
2020-03-14 00:04:00 +00:00
Scott Lahteine
6bead0c1b0
Shorter paths to HAL, ExtUI ( #17156 )
2020-03-13 16:29:29 -05:00
Scott Lahteine
ad980a72f7
M0 Q preserve status
2020-03-13 14:42:42 -05:00
Scott Lahteine
7ec45f4382
Fix end of short (auto0.g) prints
2020-03-13 13:59:17 -05:00
Scott Lahteine
81b0548518
Fix Emergency Parser stuck state
2020-03-13 13:59:17 -05:00
Erkan Colak
aa32c47fb5
Shorten German BLTouch menu item names ( #17151 )
2020-03-13 12:34:03 -05:00
nick-diel
7070ea0b49
Add OnPidTuning event to Malyan LCD ( #17143 )
...
All ExtUI LCDs need to keep up with ExtUI API changes.
2020-03-12 19:48:33 -05:00
Scott Lahteine
59cb1466b7
Fix DUGS / DGUS typo
2020-03-12 19:30:18 -05:00
Jason Smith
9c759e5f74
Fix BAUD_RATE_GCODE, etc. ( #17135 )
2020-03-12 19:26:09 -05:00
thinkyhead
8c11ecaf73
[cron] Bump distribution date (2020-03-13)
2020-03-13 00:04:16 +00:00
thinkyhead
1f55986ed2
[cron] Bump distribution date (2020-03-12)
2020-03-12 00:04:11 +00:00
Scott Lahteine
318a16637b
Fix M810 macro multiple use
...
Fixes #17125
2020-03-11 17:15:39 -05:00
BigTreeTech
8bad6e11e2
Fix STM32 _WRITE macro parameter ( #17121 )
2020-03-11 16:42:28 -05:00
Scott Lahteine
112245ee48
More explicit EEPROM types ( #17127 )
2020-03-11 16:41:18 -05:00
Scott Lahteine
924fa6045c
Non-const REMEMBER needed for RESTORE
2020-03-11 15:25:16 -05:00
Daniel Kreuzhofer (@danieldotnet)
f29d6f802f
Revert Anet 1.x envs change ( #17120 )
2020-03-11 15:08:47 -05:00
George Fu
201c991cfa
Fix and update DGUS displays ( #17072 )
2020-03-11 03:40:30 -05:00
Jamie
23c5701178
Apply soft limits to joystick jogging ( #17114 )
2020-03-10 22:59:49 -05:00
Scott Lahteine
eb6c992bfb
Announce SD file open
...
Requested in #17110
2020-03-10 22:54:19 -05:00
Gurmeet Athwal
bd44f041e8
M220 print FR percentage ( #17101 )
2020-03-10 20:13:59 -05:00
Daniel Kreuzhofer (@danieldotnet)
d78fbce827
Fix pio environments for Anet 1.x ( #17109 )
2020-03-10 20:04:44 -05:00
jufimu12
627aa8db2d
Fix G34, add HOME_AFTER_G34 option ( #17108 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-03-10 20:00:26 -05:00
Scott Lahteine
e7004550c4
Tweaks to finishSDPrinting ( #17082 )
2020-03-10 19:42:57 -05:00
thinkyhead
a31b7339cd
[cron] Bump distribution date (2020-03-11)
2020-03-11 00:04:19 +00:00
Scott Lahteine
4e3a793f1e
Fix broken enqueue_P
2020-03-10 18:28:49 -05:00
Scott Lahteine
9bff67bc74
Always look for PLR file, but more quickly
2020-03-10 17:07:14 -05:00
Vert
8bbcbc528c
Fix Z4 stepper indirection macros ( #17107 )
2020-03-10 15:57:10 -05:00
Scott Lahteine
8f66dbfcd5
SD_DETECT_INVERTED => SD_DETECT_STATE ( #17112 )
2020-03-10 15:43:06 -05:00
thinkyhead
8799f8bfdb
[cron] Bump distribution date (2020-03-10)
2020-03-10 00:04:08 +00:00
Scott Lahteine
972d1bf5b4
Ensure welcome message
2020-03-09 18:19:37 -05:00
Scott Lahteine
b5530775c9
Add debug logging for setup()
2020-03-09 17:46:49 -05:00
Scott Lahteine
13118dbd8d
Additional numtostr functions
2020-03-09 17:46:49 -05:00
Scott Lahteine
0f39386d9b
Make BOOTSCREEN_TIMEOUT generally available
2020-03-09 17:46:49 -05:00
Scott Lahteine
7674befa47
DOGM SPI delay is less common
2020-03-09 17:46:49 -05:00
Scott Lahteine
b579f5dc99
Move 'last_pause_state' closer to usage
2020-03-09 17:46:49 -05:00
thinkyhead
7f490c08da
[cron] Bump distribution date (2020-03-09)
2020-03-09 00:04:03 +00:00
Scott Lahteine
982197b162
Fixes for Z4 axis, CS pins ( #17097 )
2020-03-08 16:31:37 -05:00
MangaValk
57f488738b
[ToolChanger] Lock the current tool at power-up ( #17093 )
2020-03-08 16:13:41 -05:00
Scott Lahteine
b21edce943
More general SD_DETECT_INVERTED override
2020-03-08 14:47:16 -05:00
Scott Lahteine
2a71e4f336
Revert that wack backoff
2020-03-07 23:10:56 -06:00