SunRed/Marlin-Artillery-M600
Archived
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
5149 commits 1 branch 0 tags 119 MiB
Commit graph

4156 commits

Author SHA1 Message Date
Scott Lahteine
8198cc30b5 More bits when encoderPosition is cast as signed 2016-04-09 14:22:12 -07:00
Michael Neumann
95acba2cfa Wrong Pin Assignment Megatronics 3 
SERVO2 is doubled defined and causes compiler errors
 2016-04-09 11:23:22 +02:00
Scott Lahteine
50c3140040 Merge pull request #3414 from thinkyhead/rc_host_timeout_mods 
Host Keepalive configurable timeout with 2s default
 2016-04-08 21:45:45 -07:00
Scott Lahteine
6bd20371f0 Merge pull request #3438 from thinkyhead/rc_M109_residency_loop_fix 
Fix bug which can cause an infinite M109 loop
 2016-04-08 21:36:30 -07:00
Scott Lahteine
96e37bb70a Merge pull request #3419 from DavidBjerreBjoerklund/patch-2 
Update language_da.h
 2016-04-08 21:35:58 -07:00
Scott Lahteine
13d758c651 Merge pull request #3420 from DavidBjerreBjoerklund/patch-3 
Update language_da.h
 2016-04-08 21:31:14 -07:00
Scott Lahteine
518068a5a8 Merge pull request #3425 from tnw513/FixLangIt 
Optimized Italian strings to fit in 16 character display
 2016-04-08 21:29:28 -07:00
Scott Lahteine
1b81e5adc7 Merge pull request #3431 from AnHardt/lang-de 
de-language additions
 2016-04-08 21:25:00 -07:00
Scott Lahteine
1acf901b63 Adjustments to residency_start_ms handling 2016-04-08 21:20:23 -07:00
gralco
907aed57db Fix bug which can cause an infinite M109 loop 
Since residency_start_ms is -1 when entering the heatup while loop whilst the hotend temp is close to the target them already then it may not escape.

Hence "Start the TEMP_RESIDENCY_TIME timer when we reach target temp for the first time."
 2016-04-08 21:20:23 -07:00
jbrazio
dd3a06a95a Implemented M155 and M156, a generic TWI/I2C interface for Marlin 2016-04-08 20:14:37 -07:00
Scott Lahteine
843aa90b5a Merge pull request #3434 from thinkyhead/rc_more_debug_leveling 
Additional debug leveling output
 2016-04-08 18:57:18 -07:00
Scott Lahteine
a644ab1de4 Minor patch ups to G29 
This may fix a subtle bug caused by doing `G29` more than once without
`G28` between.
 2016-04-08 17:53:15 -07:00
Scott Lahteine
cba2698871 Additional DEBUG_LEVELING output 2016-04-08 17:53:15 -07:00
AnHardt
c3d1b7db2d de-language additions 2016-04-08 22:51:04 +02:00
Scott Lahteine
4e17187c96 Merge pull request #3426 from thinkyhead/rc_no_unhomed_lcd_move_on_delta_scara 
No LCD Move for unhomed Delta/SCARA
 2016-04-07 19:29:45 -07:00
Scott Lahteine
5e18d650c4 Merge pull request #3427 from thinkyhead/rc_better_SERIAL_ECHOPAIR 
No casting needed for SERIAL_ECHOPAIR
 2016-04-07 19:29:18 -07:00
Scott Lahteine
e0b0d1eb6b Add M113 to get/set Host Keepalive 2016-04-07 19:25:56 -07:00
Scott Lahteine
85883da90c Implement basic HOST_KEEPALIVE_INTERVAL 2016-04-07 19:25:56 -07:00
Scott Lahteine
2eca8d63b3 Add DEFAULT_KEEPALIVE_INTERVAL setting 2016-04-07 19:25:56 -07:00
Scott Lahteine
098fb8f8c9 Merge pull request #3413 from thinkyhead/rc_probe_G30_position 
Report the probe position in G30
 2016-04-07 19:25:33 -07:00
Scott Lahteine
3460d01441 Merge pull request #3422 from jbrazio/translate/pt_PT 
Update pt_PT translation
 2016-04-07 19:18:56 -07:00
Scott Lahteine
c9c7c66b95 Merge pull request #3421 from jbrazio/bugfix/m109-EXTRUDE_MINTEMP-expansion 
M109: Protect against EXTRUDE_MINTEMP expansion
 2016-04-07 19:18:34 -07:00
Scott Lahteine
d7cbb2eec9 Merge pull request #3403 from jbrazio/feature/stopwatch 
Print job timer rework
 2016-04-07 19:18:03 -07:00
Scott Lahteine
f834bcd43a Merge pull request #3415 from thinkyhead/rc_filwidth_issue 
Fix FILAMENT_WIDTH_SENSOR measurement
 2016-04-07 19:08:42 -07:00
Scott Lahteine
5fc6daba2b Disallow REPRAPWORLD_KEYPAD moves on Delta/SCARA until homed 2016-04-07 18:40:54 -07:00
Scott Lahteine
7bb15a1c57 Consolidate REPRAPWORLD_KEYPAD definitions 2016-04-07 18:40:54 -07:00
Scott Lahteine
dc19b69697 No casting needed for SERIAL_ECHOPAIR 2016-04-07 16:33:21 -07:00
Scott Lahteine
165e73794a Tweak encoderPosition non-zero test 2016-04-07 16:09:42 -07:00
Scott Lahteine
479d307a44 Disable LCD Move XYZ for unhomed Delta/SCARA 2016-04-07 16:09:42 -07:00
Silvio Didonna
9088802da1 Optimized Italian strings to fit in 16 character display 2016-04-07 19:18:22 +02:00
João Brázio
801cd48a72
Added missing pt_BR translation 2016-04-07 13:07:57 +01:00
João Brázio
013f19054b
Update pt_PT translation 2016-04-07 13:00:08 +01:00
João Brázio
471d30cc1c
M109: Protected against EXTRUDE_MINTEMP expansion 2016-04-07 12:50:57 +01:00
DavidBjerreBjoerklund
5f840d2e30 Update language_da.h 
Corrected:
MSG_KILLED
MSG_NO_MOVE
MSG_STOPPED
MSG_PRINT_ABORTED
MSG_ON
MSG_OFF
 2016-04-07 13:42:27 +02:00
João Brázio
7c7e30f4cc
Adherence to the new OOP coding standards 2016-04-07 12:41:09 +01:00
DavidBjerreBjoerklund
b80b40a578 Update language_da.h 
Added translation mentioned in issue #3351:
Homing would be best tranlated homing, or "Kører til udgangsposition".

#define MSG_SET_HOME_OFFSETS
#define MSG_LEVEL_BED_HOMING
#define MSG_LEVEL_BED_WAITING 
#define MSG_LEVEL_BED_DONE
#define MSG_LEVEL_BED_CANCEL 
#define MSG_HOME_OFFSETS_APPLIED
 2016-04-07 12:52:31 +02:00
Scott Lahteine
573d772c92 Merge pull request #3416 from paulusjacobus/RCBugFix 
Optimised Ducth messages to fit in 16 Char display Update language_nl.h
 2016-04-06 20:41:14 -07:00
paulusjacobus
3f7ae9a7ce Update language_nl.h 
Optimised all added messages to fit within 16 Characters
 2016-04-07 13:15:00 +10:00
Scott Lahteine
865dcf3fb4 Fix FILAMENT_WIDTH_SENSOR measurement 
Only measure and store filament width when E is going forward.
 2016-04-06 19:48:04 -07:00
Scott Lahteine
2f6c5fe2da Report the probe position in G30 2016-04-06 16:55:21 -07:00
Scott Lahteine
74effedbf5 Merge pull request #3412 from paulusjacobus/RCBugFix 
rebased my fork with RCBugFix release in order to push language_nl.h
 2016-04-06 16:53:35 -07:00
Scott Lahteine
bba1f16589 Merge pull request #3411 from esenapaj/patch-1 
Update Readme.fonts about Kana
 2016-04-06 16:19:19 -07:00
Paul de Groot
48a4410f02 rebased my fork with RCBugFix release in order to push language_nl.h 2016-04-07 08:17:59 +10:00
esenapaj
ff9511b870 Update Readme.fonts about Kana 
I think that that sentence has been completed its part. 
Because Kana fonts were revised by me the other day(PR #3289), who am a native Japanese.

And for @AnHardt,
I'd like to take this opportunity to express one's heartfelt gratitude as a far eastern person,
about you has been maintaining the resource of Japanese despite you are a far western person.
 2016-04-07 07:13:46 +09:00
Silvio Didonna
e215c7100d fixed mistranslations and minor changes for consistency between "it" and "en" files. 2016-04-06 16:45:04 +02:00
Silvio Didonna
6208db3b00 fixed mistranslations and minor changes for consistency between "it" and "en" files. 2016-04-06 16:40:01 +02:00
João Brázio
e48d0263bf Bugfix: M32 was still using the old print timer 2016-04-06 04:41:36 +01:00
João Brázio
e8b80d8c20 Implemented M75, M76, M77 to control the print timer 2016-04-06 04:38:42 +01:00
João Brázio
eb61051556 Rework the print job timer to use the stopwatch class 2016-04-06 04:34:03 +01:00
João Brázio
399101fff3 Implemented the stopwatch class and methods 2016-04-06 04:23:45 +01:00
Scott Lahteine
98f2e9fc83 Reduce string storage required for DEBUG_LEVELING 2016-04-05 19:04:42 -07:00
Scott Lahteine
1af5d7b35f Add more leveling-debug output 2016-04-05 18:31:10 -07:00
Scott Lahteine
d5b19a49f6 Merge pull request #3384 from thinkyhead/rc_adjust_M111_output 
Final tweaks to M111 output
 2016-04-05 16:48:59 -07:00
Scott Lahteine
da2ff4a6d3 Catch a TEMP_SENSOR error before a pins issue 2016-04-05 16:17:28 -07:00
Scott Lahteine
90f6f02aca Merge pull request #3397 from thinkyhead/rc_menu_issues_fixer 
Revert #3388, clean up lcd_move code
 2016-04-05 15:45:35 -07:00
Scott Lahteine
fb38d698db Add feedback after "Click to Begin" 2016-04-05 15:35:05 -07:00
Scott Lahteine
d5f0db26dc Merge pull request #3390 from jbrazio/docs/update-source-url 
Update DEFAULT_SOURCE_URL comment
 2016-04-05 15:17:07 -07:00
Scott Lahteine
ce58d1d4d5 Merge pull request #3392 from barus93/patch-2 
Update language_it.h
 2016-04-05 15:16:24 -07:00
Scott Lahteine
582b58e660 Add audio feedback to edit items 2016-04-05 14:51:11 -07:00
Scott Lahteine
a70c3ffc21 Minor syntax tweak with encoderPosition 2016-04-05 14:51:11 -07:00
Scott Lahteine
0f247187b8 Drop extra setting of currentMenu 2016-04-05 14:51:11 -07:00
Scott Lahteine
24cde86a4f Fix syntax highlighting of menu_edit_type lines 2016-04-05 14:51:11 -07:00
Scott Lahteine
86372cd394 Add underscore to internal lcd move function names 2016-04-05 14:51:11 -07:00
Scott Lahteine
aa97328cd3 Use min_pos/max_pos for _lcd_move 2016-04-05 14:51:10 -07:00
Scott Lahteine
f936df9507 Small cleanup of feedrate dead-zone 2016-04-05 14:51:10 -07:00
Scott Lahteine
f5c2fb27cd Handle defer_return_to_status in lcd_goto_menu 2016-04-05 14:51:10 -07:00
Scott Lahteine
8459f7fa5c Use ms where possible. 2016-04-05 14:51:10 -07:00
Scott Lahteine
34ce9c4c1c Restore save previous for menu edit items 2016-04-05 14:26:36 -07:00
Gege2B
03d5c9a482 Merge remote-tracking branch 'upstream/RCBugFix' into RCBugFix 2016-04-05 12:14:15 +02:00
Gege2B
4ea45d5c56 Some omitted french translation 2016-04-05 12:04:29 +02:00
barus93
f43e37bb0c Update language_it.h 
New messages translated:
#define MSG_LEVEL_BED_HOMING "Homing XYZ"
#define MSG_LEVEL_BED_WAITING "Click to Begin"
#define MSG_LEVEL_BED_DONE "Leveling Done!"
#define MSG_LEVEL_BED_CANCEL "Cancel"
. . .
#define MSG_HOME_OFFSETS_APPLIED "Offsets applied"
 2016-04-05 07:24:07 +02:00
João Brázio
9240682630 Followup #3326: Update DEFAULT_SOURCE_URL comment 2016-04-05 02:21:23 +01:00
Scott Lahteine
4b8a71055e Merge pull request #3388 from thinkyhead/rc_fix_move_menu_bug 
Fix: menu edit items saving position twice
 2016-04-04 17:05:15 -07:00
Scott Lahteine
1220dfd5d6 Fix: menu edit items saving position twice 2016-04-04 16:36:04 -07:00
Scott Lahteine
b5920837ea Merge pull request #3370 from esenapaj/patch-1 
Drop DISABLE_M(IN|AX)_ENDSTOPS, replace with individual endstop flags
 2016-04-04 16:12:50 -07:00
Scott Lahteine
53b397ab14 Merge pull request #3364 from jbrazio/script/find-missing-translations 
Added a script to check all language files for missing translations
 2016-04-04 16:10:36 -07:00
Scott Lahteine
d6fe454a13 Merge pull request #3386 from thinkyhead/rc_spanish_rebase 
Add Missing Spanish translation
 2016-04-04 16:07:34 -07:00
Scott Lahteine
2abea41c41 Merge pull request #3385 from thinkyhead/rc_dutch_translation 
Update language_nl.h
 2016-04-04 16:02:11 -07:00
RicardoGA
1bfaf57ee5 Add Missing Spanish translation 
Add the missing translation (Spanish) issue #3353
 2016-04-04 15:55:59 -07:00
paulusjacobus
4a4b797dca Update language_nl.h 
Added these messages with Dutch translation
#define MSG_BED_Z
#define MSG_A_TRAVEL
#define MSG_HEATING_FAILED_LCD
#define MSG_ERR_REDUNDANT_TEMP
#define MSG_THERMAL_RUNAWAY
#define MSG_ERR_MAXTEMP
#define MSG_ERR_MINTEMP
#define MSG_ERR_MAXTEMP_BED
#define MSG_ERR_MINTEMP_BED
#define MSG_HEATING
#define MSG_HEATING_COMPLETE
#define MSG_BED_HEATING
#define MSG_BED_DONE
 2016-04-04 15:46:50 -07:00
Scott Lahteine
1ee903f30d Merge pull request #3376 from gege2b/RCBugFix 
French translation
 2016-04-04 15:40:00 -07:00
Scott Lahteine
c5ff2c7d32 Merge pull request #3377 from clexpert/patch-1 
Update language_cz.h
 2016-04-04 15:39:44 -07:00
Scott Lahteine
99898ea652 Merge pull request #3379 from barus93/patch-2 
Update language_it.h
 2016-04-04 15:39:15 -07:00
Scott Lahteine
56e8e2b0eb Final tweaks to M111 output 2016-04-04 15:36:07 -07:00
barus93
040a0c49db Update language_it.h 
ADD missing translation
 2016-04-04 20:22:34 +02:00
Petr Zahradnik
8b843e997a Update language_cz.h 2016-04-04 17:26:19 +02:00
Petr Zahradnik
3cd2beb750 Update language_cz.h 2016-04-04 16:54:26 +02:00
Gege2B
34bf9530c0 French translation 2016-04-04 16:45:06 +02:00
João Brázio
d819a4aff9 Fixes #3346, followup #3343: variables must defined with the static keyword to work with PROGMEM when defined inside functions 2016-04-04 15:02:18 +01:00
esenapaj
1326dc7258 Drop DISABLE_M(IN|AX)_ENDSTOPS, replace with individual endstop flags 
This is follow-up the commit e5771346a4.
Update unnoticed files.
 2016-04-04 17:49:25 +09:00
Scott Lahteine
0433df3835 Merge pull request #3366 from jbrazio/translate/pt_PT 
Added missing translations for pt_PT
 2016-04-03 21:02:13 -07:00
João Brázio
dff6adfbca Fixes #3361: Added missing translations for pt_PT 2016-04-04 04:57:32 +01:00
Scott Lahteine
c0e7257932 Fix bug in new endstop pullups handling 2016-04-03 20:52:32 -07:00
João Brázio
f94900ee79 Added a script to check all language files for missing translations 2016-04-04 04:46:04 +01:00
Scott Lahteine
de39056f68 Merge pull request #3343 from thinkyhead/rc_fix_m111_output 
Fix M111 output using pgm_read_word, as required
 2016-04-03 17:44:38 -07:00
Scott Lahteine
fd0ac371b0 Fix M111 output using pgm_read_word as required 
As noted by @taratata2016 in https://github.com/MarlinFirmware/Marlin/issues/3300#issuecomment-204687275
 2016-04-03 17:33:06 -07:00
esenapaj
c4d7e0307c Update Japanese translation 2016-04-04 09:11:23 +09:00
Scott Lahteine
c045ec8cb3 Merge pull request #3065 from thinkyhead/rc_doc_tweaks 
Simplified endstop configuration
 2016-04-03 17:05:47 -07:00
Scott Lahteine
d771174797 Merge pull request #3337 from esenapaj/patch-2 
suppress warnings
 2016-04-03 17:01:22 -07:00
Scott Lahteine
f2032cfcf6 Merge pull request #3341 from thinkyhead/rc_english_patch 
Fix English definition for MSG_LEVEL_BED_CANCEL
 2016-04-03 16:58:51 -07:00
Scott Lahteine
09c6f80c1e Fix MSG_LEVEL_BED_CANCEL english 2016-04-03 16:41:27 -07:00
esenapaj
afe7d26543 Update Japanese translation 2016-04-03 16:39:37 -07:00
Scott Lahteine
3aee89b93a Merge pull request #3338 from thinkyhead/rc_patches_april_3 
Add history to LCD Menus, fix up Manual Bed Leveling
 2016-04-03 16:37:39 -07:00
Scott Lahteine
7a2f73c6db Remove extra comma from LCDHandlerAction 2016-04-03 16:27:30 -07:00
Scott Lahteine
3fbf67e5ce Patch MBL feedback and event handling 2016-04-03 16:27:30 -07:00
Scott Lahteine
ef2fbaec98 Headings for menu sub-items, actions, etc. 2016-04-03 16:27:29 -07:00
Scott Lahteine
dc109ac4e2 Move MBL code to its logical place 2016-04-03 16:27:29 -07:00
Scott Lahteine
6730408ec1 Move lcd_autostart_sd to its logical place 2016-04-03 16:27:29 -07:00
Scott Lahteine
056b80dc53 Have "back" menu items go to the previous item 2016-04-03 16:27:29 -07:00
Scott Lahteine
c94482168b Add MSG_LEVEL_BED_CANCEL for MBL 2016-04-03 16:27:29 -07:00
Scott Lahteine
877fb1f588 Account for MAX31855 in conditionals 2016-04-03 16:19:17 -07:00
Scott Lahteine
d24f14a799 Add HAS_TEMP_HOTEND define 2016-04-03 16:18:49 -07:00
esenapaj
f9e1a0ee6c suppress warnings 2016-04-04 06:48:53 +09:00
Scott Lahteine
cf9a171aa9 Merge pull request #3330 from thinkyhead/rc_mbl_lcdDrawUpdate 
Improvements to MBL, general LCD menu handling
 2016-04-02 19:20:23 -07:00
Scott Lahteine
2b01649533 Move default machine info to pins files 2016-04-02 18:53:05 -07:00
Scott Lahteine
4f24323817 Split DEFAULT_MACHINE_NAME from DEFAULT_SOURCE_URL 
Addressing #3325 – Avoid undefined symbol errors in the compiler.
 2016-04-02 18:41:01 -07:00
Scott Lahteine
771ee1c1a9 Update MBL menu sub-function names 2016-04-02 18:20:47 -07:00
Scott Lahteine
d659777e70 Fix MBL to handle re-entrant calls 2016-04-02 18:14:49 -07:00
Scott Lahteine
5719fcba51 Add MSG_LEVEL_BED_DONE and MSG_LEVEL_BED_WAITING 2016-04-02 18:14:49 -07:00
Scott Lahteine
80b8fd1cad Add MSG_HOME_OFFSETS_APPLIED 2016-04-02 18:14:49 -07:00
Scott Lahteine
d1c45ff80b More user interaction in MBL 2016-04-02 18:14:49 -07:00
Scott Lahteine
240b71ee1c Give names to lcdDrawUpdate values 2016-04-02 18:14:48 -07:00
Scott Lahteine
b0a3c7a91c Add feedback sounds to MBL items 2016-04-02 17:08:43 -07:00
Scott Lahteine
782c598e66 Use ftostr43 with '+' option in MBL Z adjuster 2016-04-02 17:08:43 -07:00
Scott Lahteine
f08b0d034f Merge pull request #3328 from RicardoGA/RC_Babystepping_fix 
Babystepping Fix
 2016-04-02 16:48:45 -07:00
Scott Lahteine
09437466b1 Merge pull request #3324 from tnw513/fix_filament_dia 
changed DEFAULT_NOMINAL_FILAMENT_DIA for consistency between example config files
 2016-04-02 16:40:24 -07:00
Scott Lahteine
2b4c42610c Adjust SanityCheck messages 2016-04-02 16:39:23 -07:00
Scott Lahteine
a617d12f70 Account for Z_DUAL_ENDSTOPS in sanity checking of endstops 2016-04-02 16:39:23 -07:00
Scott Lahteine
868eebfdee Simplify configuration of Z2 endstops 2016-04-02 16:39:23 -07:00
Scott Lahteine
e5771346a4 Drop DISABLE_M(IN|AX)_ENDSTOPS, replace with individual endstop flags 2016-04-02 16:39:23 -07:00
Scott Lahteine
071c742b8a Move STRINGIFY to macros.h, use in language.h 2016-04-02 16:38:43 -07:00
Scott Lahteine
2ee599d873 Merge pull request #3321 from tnw513/fix_max_endstop 
Max endstops disabled for stock Prusa i3 Hephestos.
 2016-04-02 16:38:10 -07:00
Scott Lahteine
4e1bbdb89f Merge pull request #3320 from alhirzel/RCBugFix 
Fix manual Y movement on delta (regression).
 2016-04-02 16:37:14 -07:00
Scott Lahteine
5fb88a2754 Merge pull request #3314 from jbrazio/bugfix/followup-3235 
Fixes missing icons from status screen
 2016-04-02 16:36:18 -07:00
Scott Lahteine
3c14c01a3a Merge pull request #3310 from esenapaj/patch-2 
Follow-up the commit a393941
 2016-04-02 16:35:31 -07:00
RicardoGA
6b1d2263a2 Babystepping Fix 2016-04-02 14:53:57 -06:00
Silvio Didonna
dfe891fe11 changed filament diameter for consistency between all example config files. 2016-04-02 21:05:25 +02:00
Alexander Hirzel
6e0d627c8c Unbreak the Delta radius clipping 2016-04-02 12:58:39 -04:00
Silvio Didonna
6c528e63eb max endstops disabled. Stock Prusa i3 Hephestos have min endstops. 2016-04-02 16:54:59 +02:00
Alexander Hirzel
949172606f Fix manual Y movement on delta (regression). 2016-04-02 10:48:13 -04:00
João Brázio
55a248d6b4 Fixes #3313 : Wrong board def in pins.h 2016-04-02 09:28:58 +01:00
João Brázio
04b2abb6aa Fixes #3312: Missing all icons from status screen 2016-04-02 06:50:02 +01:00
esenapaj
81593cb3cb Follow-up the commit a393941 2016-04-02 11:23:33 +09:00
Scott Lahteine
6a245fe4f7 Release 1.1.0-RC5 2016-04-01 19:14:49 -07:00
Scott Lahteine
e8f8a46ef5 Merge pull request #3303 from thinkyhead/rc_various_fixes 
Various patches for LCD menu issues
 2016-04-01 18:02:25 -07:00
Scott Lahteine
b98f72b483 Small optimization for ftostr43 2016-04-01 17:54:16 -07:00
Scott Lahteine
a393941d2d Combine "XYZ" with MSG_LEVEL_BED_HOMING 2016-04-01 17:51:03 -07:00
Scott Lahteine
097cc75ba8 Patch _lcd_level_bed draw to fix flicker, show proper offset 2016-04-01 17:51:03 -07:00
Scott Lahteine
1e1a18e091 Remove extra semicolon in ultralcd.cpp 2016-04-01 17:51:03 -07:00
Scott Lahteine
0b4f65dca8 Always limit blink to ~1 second intervals 2016-04-01 17:51:03 -07:00
Scott Lahteine
ffe054c129 Fix comment about host keepalive interval 2016-04-01 17:28:08 -07:00
Scott Lahteine
0d6609c3c5 lcd_goto_menu should set lcdDrawUpdate to 2 2016-04-01 17:07:40 -07:00
Scott Lahteine
af89ccf96a Use flag to defer lcd return-to-status 2016-04-01 17:07:39 -07:00
Scott Lahteine
641b30217e Patch prevEncoderPosition compile issue 
Thanks to @jbrazio #3301
 2016-04-01 17:07:39 -07:00
Scott Lahteine
41aa4bdf1f Use XYZ translated strings in dogm 2016-04-01 17:07:39 -07:00
Scott Lahteine
92882fcc51 Allow lcd_implementation_drawedit to draw a message 2016-04-01 17:04:33 -07:00
Scott Lahteine
0114cf1101 RCBugFix version string 2016-04-01 17:04:33 -07:00
Scott Lahteine
9c43369ebb Merge pull request #3306 from thinkyhead/rc_fix_num2str 
Clean up num2str functions, extend ftostr43
 2016-04-01 17:04:03 -07:00
Scott Lahteine
1da9d10173 Support for MKS v1.3/1.4 and Sainsmart RAMPS 1.4 variants 2016-04-01 16:54:35 -07:00
Scott Lahteine
fcedfd6e99 Clean up num2str functions, extend ftostr43 2016-04-01 16:52:59 -07:00
Scott Lahteine
2512d8fd5e Merge pull request #3304 from thinkyhead/rc_slow_buttons 
Macros for buttons, some cleanup for slow buttons
 2016-04-01 15:31:54 -07:00
Scott Lahteine
f543aaa54e Apply standard pin test to buttons 
This is the easiest way to make button pin testing consistent without
renaming all the button pins. Just make a macro especially for testing
if button pins are set, since they are named consistently in the pins
files.
 2016-04-01 15:12:12 -07:00
Scott Lahteine
f2ffc8b28b Rename local slow_buttons for clarity 2016-04-01 15:06:33 -07:00
Scott Lahteine
26279fa43c Merge pull request #3289 from esenapaj/patch-1 
Update Kana font
 2016-04-01 14:31:32 -07:00
Scott Lahteine
0bee67e5f1 Merge pull request #3294 from jbrazio/bugfix/mandatory-extrude-mintemp 
Fix an error when EXTRUDE_MINTEMP is not defined
 2016-04-01 14:23:32 -07:00
João Brázio
709dd5aa4d Fix an error when EXTRUDE_MINTEMP is not defined 2016-03-31 16:25:48 +01:00
Scott Lahteine
bc86ee0271 Simplify homeaxis with some macros 2016-03-30 18:44:05 -07:00
esenapaj
cc5059478a Update Kana font 2016-03-31 10:02:47 +09:00
Scott Lahteine
82ef101ed5 Deploy & Stow in G29 for Delta + Z Servo Endstop 2016-03-30 16:41:16 -07:00
Scott Lahteine
33a9d32800 Merge pull request #3285 from thinkyhead/rc_fix_drawedit 
Fix string issues in ultralcd.cpp
 2016-03-30 13:01:07 -07:00
Scott Lahteine
6a4d394fff Fix pointer-to-string issues with set_home_offsets and _lcd_level_bed_homing 2016-03-30 12:32:25 -07:00
Scott Lahteine
de333c4fea Merge pull request #3279 from thinkyhead/rc_filament_width_sensor 
FILAMENT_SENSOR -> FILAMENT_WIDTH_SENSOR
 2016-03-30 12:16:27 -07:00
Scott Lahteine
0f835c0c4e Merge pull request #3259 from jbrazio/bugfix/old-ide-warning 
Show a warning message when Arduino IDE is prior to 1.5
 2016-03-30 12:15:51 -07:00
Scott Lahteine
8def2c31db Merge pull request #3284 from thinkyhead/rc_stop_watchheat_lcdset0 
Fix temperature checking conditions (backwards!)
 2016-03-30 12:10:39 -07:00
Scott Lahteine
b919a6f182 Merge pull request #3280 from esenapaj/patch-1 
Update U8glib URL
 2016-03-30 12:06:53 -07:00
Scott Lahteine
8bf5f7c676 Merge pull request #3282 from jbrazio/bugfix/m104-timer-wont-start 
M104 not starting the print timer
 2016-03-30 11:54:16 -07:00
Scott Lahteine
31450ad498 Fix temperature checking conditions (backwards!) 2016-03-30 11:52:03 -07:00
João Brázio
187c183c20 M104 was not starting the print timer 2016-03-30 11:33:24 +01:00
esenapaj
352294b5f5 Update U8glib URL 2016-03-30 14:26:28 +09:00
Scott Lahteine
507aef055f Patch broken M404 2016-03-29 20:54:31 -07:00
Scott Lahteine
1a79b13b7a FILAMENT_SENSOR -> FILAMENT_WIDTH_SENSOR 2016-03-29 20:54:31 -07:00
Scott Lahteine
7f81aa7ff3 Pins should always be defined (even for disabled features) 2016-03-29 20:44:14 -07:00
Scott Lahteine
5f32184254 Merge pull request #3278 from thinkyhead/rc_cleanup_m111_redo 
Echo all debug levels in M111, default to DEBUG_NONE
 2016-03-29 20:34:31 -07:00
Scott Lahteine
05765fb570 Add DEBUGGING macro 2016-03-29 19:50:01 -07:00
Scott Lahteine
4402760739 Echo all debug levels in M111, default to DEBUG_NONE 
Redo of #3268 by @jbrazio
 2016-03-29 19:18:45 -07:00
Scott Lahteine
f0b96f5cae Merge pull request #3276 from thinkyhead/rc_sdprint_and_lcd_sleuth 
Refinements, fixes, reduced stack usage in CardReader
 2016-03-29 18:30:18 -07:00
Scott Lahteine
12c0bf9521 Merge pull request #3277 from jbrazio/bugfix/m190-temp-never-reached 
M190 bed temp is never reached
 2016-03-29 18:28:51 -07:00
João Brázio
c6577aea60 M190 bed temp was never reached 2016-03-30 01:03:20 +01:00
Scott Lahteine
ce0a9d3dc6 A picky fix of indentation in cardreader.cpp 2016-03-29 16:23:12 -07:00
Scott Lahteine
4ed8351e3d Revert use of enqueue_and_echo_command_now 2016-03-29 16:23:12 -07:00
Scott Lahteine
70d1d4de5f Small code spacing adjustments 2016-03-29 03:19:27 -07:00
Scott Lahteine
0385acea7a Fix workDirParents -> getAbsFilename relationship 2016-03-29 03:18:53 -07:00
Scott Lahteine
27d70599d4 Change openFile default to "not-push" instead of "do-replace" 2016-03-29 03:16:35 -07:00
Scott Lahteine
372f93cc7a Rename "filenames" to "proc_filenames" 2016-03-29 03:15:01 -07:00
Scott Lahteine
6b01cf07c2 Use only as much stack as needed for the M23 command 2016-03-29 02:34:33 -07:00
Scott Lahteine
9e520ae319 Merge pull request #3272 from thinkyhead/rc_filament_sensor_scope 
Minor cleanup to filament sensor code
 2016-03-28 20:51:46 -07:00
Scott Lahteine
3252df7998 Minor cleanup to filament sensor code 2016-03-28 20:04:34 -07:00
Scott Lahteine
b60ea95adf Keep blinking limited to LCD_UPDATE_INTERVAL 2016-03-28 19:41:13 -07:00
Scott Lahteine
e0ab06cfae Merge pull request #3267 from thinkyhead/rc_command_args_null_oooops 
Cleanup, simplification of command dispatcher code
 2016-03-28 18:54:00 -07:00
Scott Lahteine
0b8ef5eba6 Split get_command into units, rename to get_available_commands 2016-03-28 06:00:04 -07:00
Scott Lahteine
545f7997ea Continue on empty lines instead of returning 2016-03-28 05:37:36 -07:00
Scott Lahteine
3dcf6d42ff Don't store escaped serial characters if comment_mode 2016-03-28 05:37:36 -07:00
Scott Lahteine
5f8e52aefb Minor cleanup to command dispatcher 2016-03-28 05:37:36 -07:00
jbrazio
0880fecbd4 Show a warning message when Arduino IDE is prior to 1.5 2016-03-28 11:55:42 +01:00
Scott Lahteine
f1ed310322 Add NUMERIC compare macros to simplify code 2016-03-28 03:52:49 -07:00
Scott Lahteine
3b2d159abd Relax the test for "Heating failed" errors 2016-03-27 07:02:10 -07:00
Scott Lahteine
2e4ddd5c22 Merge pull request #3260 from jbrazio/cleanup/standardize-comment-style 
Formatted multi-line comments
 2016-03-26 21:42:33 -07:00
jbrazio
443e6d26fe Formatted multi-line comments 2016-03-27 04:36:36 +01:00
esenapaj
7950b5268a Use SBI macro 2016-03-26 20:17:52 +09:00
Scott Lahteine
e4039a9b5b Merge pull request #3250 from esenapaj/patch-1 
Fix typo
 2016-03-26 00:41:31 -07:00
Scott Lahteine
1d987cd280 Merge pull request #3253 from thinkyhead/rc_autotune_menu_optional 
Make the Autotune option(s) in the LCD menu optional
 2016-03-26 00:32:05 -07:00
Scott Lahteine
d6f92f9efe Remove Tonokip remnant from recent PR 2016-03-25 23:50:29 -07:00
Scott Lahteine
ab412a2153 PIDTEMPBED on #endif 2016-03-25 23:50:28 -07:00
Scott Lahteine
53cc6cca46 Formalize some dependencies on PIDTEMPBED 2016-03-25 23:50:28 -07:00
Scott Lahteine
5955a3063f Sanity check PIDTEMPBED plus BED_LIMIT_SWITCHING 2016-03-25 23:50:28 -07:00
Scott Lahteine
67fabb6044 Merge pull request #3252 from thinkyhead/rc_keepalive_less 
Host Keepalive: Reduce frequency of "busy" messages
 2016-03-25 23:37:02 -07:00
Scott Lahteine
d1bdd25b84 Merge pull request #3249 from esenapaj/patch-2 
Update Japanese translation
 2016-03-25 22:53:00 -07:00
Scott Lahteine
0d554c10ac Merge pull request #3244 from ch100/RCBugFix 
Fixed backlight for PCF8575.
 2016-03-25 22:50:20 -07:00
Scott Lahteine
cd4c3e90bc Send a busy signal every 10 seconds instead of every 2 2016-03-25 22:15:40 -07:00
Scott Lahteine
8cb04816b5 Apply PID_AUTOTUNE_MENU option to ultralcd.cpp 2016-03-25 19:31:56 -07:00
Scott Lahteine
4b31c67dce Add PID_AUTOTUNE_MENU option 2016-03-25 19:31:56 -07:00
Scott Lahteine
e08915a723 Fix comments in Configuration_adv.h 2016-03-25 19:31:31 -07:00
Scott Lahteine
26168676e7 Merge pull request #3246 from thinkyhead/rc_fix_numeric_filenames 
Fix: current_command_args skips digits at the front
 2016-03-25 16:38:36 -07:00
esenapaj
f54315c728 Fix typo 
These are salvaged from closed-PR #3216.
 2016-03-26 08:37:17 +09:00
esenapaj
37a0806420 Update Japanese trasration 
Follow the PR #3242.
 2016-03-26 08:21:17 +09:00
Scott Lahteine
f423716c6a Fix: current_command_args skips digits at the front 
Closes #3245
 2016-03-25 16:12:41 -07:00
Christian Inci
627f39e1e3 Fixed backlight for PCF8575. 
Fixed backlight for PCF8575.

Signed-off-by: Christian Inci <chris.pcguy.inci@gmail.com>
 2016-03-25 14:49:55 +01:00
Scott Lahteine
fc0baec991 Merge pull request #3240 from esenapaj/patch-1 
Fix distribution date
 2016-03-25 06:49:42 -07:00
Scott Lahteine
18de9f55ac Merge pull request #3242 from thinkyhead/rc_epatel_mesh_fixes 
Updated Mesh Bed Leveling
 2016-03-25 06:48:12 -07:00
Scott Lahteine
3a1e6b1752 Merge pull request #3243 from AnHardt/homed 
axis_known_position -> axis_homed
 2016-03-25 06:36:46 -07:00
AnHardt
94962ee678 axis_known_position -> axis_homed 
In all these cases we want the axis to be homed. If we could have lost
some steps is secondary.

Reenables homing seperate axis with DISABLE_X / DISABLE_Y true.
 2016-03-25 14:05:20 +01:00
Edward Patel
14afe1a017 Move to Z=0 for G28 when using Manual Bed Leveling 
copy of 406992f9dd
 2016-03-25 04:58:44 -07:00
Edward Patel
c606ed447a Add "G29 S4" to fine tune Z level for Mesh Bed Leveling. 
Also add mbl.z_offset to the EEPROM, bumping the version to V23.
 2016-03-25 04:58:43 -07:00
Scott Lahteine
5d8036e554 Code cleanup around MOTOR_CURRENT_PWM options 2016-03-25 04:23:46 -07:00
esenapaj
bec112de87 Fix distribution date 2016-03-25 18:56:16 +09:00
Scott Lahteine
f394c0639e Merge pull request #3230 from jbrazio/bugfix/ultra-lcd-warning 
Fix a compiler warning in ultralcd.cpp
 2016-03-25 01:14:54 -07:00
João Brázio
f077c7abbf Fix dogm lcd error when FAN_PIN is defined as -1 2016-03-25 01:09:09 -07:00
Scott Lahteine
0da744b7b0 Further cleanup of comments, partial Doxygen-style 
Following up on #3231
 2016-03-25 00:45:56 -07:00
Scott Lahteine
4823791eb0 Merge pull request #3228 from esenapaj/patch-1 
Fix spelling
 2016-03-25 00:40:51 -07:00
jbrazio
80f221ed11 Fixed: warning: extra tokens at end of #endif directive 2016-03-24 19:33:25 +00:00
jbrazio
5e5d250832 Added gplv3 header to all Marlin files 2016-03-24 18:01:20 +00:00
esenapaj
89a845659a Fix spelling 
PROBABLE ->PROBEABLE
This is follow-up to #3069?
 2016-03-25 02:13:37 +09:00
Scott Lahteine
a6e39c1005 Release 1.1.0-RC4 2016-03-24 05:32:33 -07:00
Scott Lahteine
42ec1f39e7 Merge pull request #3207 from jbrazio/bugfix/toshiba-sdhc-flashair 
Toshiba Flash Air Wifi SD card support
 2016-03-24 05:28:48 -07:00
Scott Lahteine
b6ca86b974 Merge pull request #3197 from PheiPheiPhei/RCBugFix 
Enabling servo usage on boards with PWM current control
 2016-03-24 05:27:57 -07:00
Scott Lahteine
a6805ddf30 Merge pull request #3225 from yarda/fix-melzi-makr3d 
Fix MELZI_MAKR3D to use correct motherboard
 2016-03-24 05:24:57 -07:00
Scott Lahteine
af32a7d5d6 M120/M121 also set endstops non-homing state 2016-03-24 03:24:23 -07:00
Scott Lahteine
04fa9d4f47 Make Autotune options into Menu Edit Items 2016-03-24 02:00:08 -07:00
WPBack
e3f583a3be Fixes for PID AutoTune from menu 
Fixes for #3189

Setting a temp is still missing
 2016-03-24 01:47:30 -07:00
WPBack
3b3e8a02b5 Initial implementation of PID Autotune Menu Items 
Adds the parameter U to M303. If U1 is included , it will use the
PID-values from the auto-tune.
 2016-03-24 01:46:37 -07:00
Scott Lahteine
da9d4c4caf Merge pull request #3206 from esenapaj/patch-5 
Follow-up the PR #3082, etc
 2016-03-24 00:20:25 -07:00
Scott Lahteine
c5857f96c8 Merge pull request #3182 from thinkyhead/rcbugfix_printrboard_revf 
Add support for Printrboard RevF
 2016-03-24 00:12:06 -07:00
Scott Lahteine
f774420488 Merge pull request #3196 from thinkyhead/rc_controllerfan_bug 
Make DISABLE_INACTIVE_X, etc., true if missing
 2016-03-24 00:11:46 -07:00
Scott Lahteine
7d55d86081 Merge pull request #3219 from AnHardt/RH-pos-update 
Send position updates to RH
 2016-03-23 23:20:24 -07:00
Scott Lahteine
7ea4e095ad Merge pull request #3220 from thinkyhead/rc_tori_spelling 
Patch minor spelling error in cn, en, gl language file headings
 2016-03-23 22:43:11 -07:00
Scott Lahteine
bcbac698f2 Patch minor spelling issue in cn, en, gl language file headings 2016-03-23 22:30:07 -07:00
Scott Lahteine
49ed4696ea Merge pull request #3218 from AnHardt/lost-pin-undef 
Fix lost undef Y_MAX_PIN in pins.h
 2016-03-23 21:37:51 -07:00
Scott Lahteine
7112f2e41a Merge pull request #3204 from esenapaj/patch-3 
Change link to the document
 2016-03-23 20:56:52 -07:00
AnHardt
1c6a16d5bb Send position updates to RH 
Send position updates to RH where RH can not know the end position.

For example after G28 RepetierHost assumes to be at the homing-point,
but with a servo probe we are much higher. Now the RH-software-endstops
will prevent us from going down (if activated). With this patch the
internal position of RH is updated with `current_position[]`.
 2016-03-23 13:30:50 +01:00
AnHardt
1b336971ae Fix lost undef Y_MAX_PIN in pins.h 2016-03-23 12:48:06 +01:00
AnHardt
ba4eebad2f Fix Fan KICKSTART 
Sorting ot what else belongs to what if was not so hard.
But the static `ms = ms = millis();` was a bit surpising.
 2016-03-23 12:08:02 +01:00
Scott Lahteine
cbce025248 Merge pull request #3217 from thinkyhead/rc_updated_kana 
Patch-up to commits for Kana #3203.
Closes #3203.
 2016-03-23 02:46:26 -07:00
esenapaj
665338bb69 Update Japanese translation 2016-03-23 02:43:53 -07:00
AnHardt
6486e8b74a Call buzz() directly from M428 2016-03-22 15:05:04 +01:00
jbrazio
757661b299 Toshiba Flash Air Wifi SD card support 2016-03-22 11:42:11 +00:00
esenapaj
fc75e6f92d Follow-up the PR #3082, etc 
Follow-up the PR #3082
Follow-up the commit 143ad74: unnoticed updates
Fix for commit b0f5ba0: Z offset: -front [of the nozzle] +behind -> Y offset: -front [of the nozzle] +behind
Standardize the writing method: Z-probe, z-probe -> Z Probe
Adjust spacing
 2016-03-22 20:22:01 +09:00
esenapaj
22299c13c1 Change link to the document 
documentation/LCDLanguageFont.md moved to http://www.marlinfirmware.org/ at commit 12d0983757,
but http://www.marlinfirmware.org/ isn't working.
 2016-03-22 19:58:41 +09:00
PheiPheiPhei
adb5375a09 Enabling servo usage on boards with PWM current control 
Enabling servo usage on boards with PWM current control
timer5 is used by some boards like the Mini Rambo for controlling motor current via PWM, see stepper.cpp.
```cpp
  #ifdef MOTOR_CURRENT_PWM_XY_PIN
    pinMode(MOTOR_CURRENT_PWM_XY_PIN, OUTPUT);
    pinMode(MOTOR_CURRENT_PWM_Z_PIN, OUTPUT);
    pinMode(MOTOR_CURRENT_PWM_E_PIN, OUTPUT);
    digipot_current(0, motor_current_setting[0]);
    digipot_current(1, motor_current_setting[1]);
    digipot_current(2, motor_current_setting[2]);
    //Set timer5 to 31khz so the PWM of the motor power is as constant as possible. (removes a buzzing noise)
    TCCR5B = (TCCR5B & ~(_BV(CS50) | _BV(CS51) | _BV(CS52))) | _BV(CS50);
  #endif
}
```
Using the same timer for controlling servos results in loss of motor control. So use timer4/3 for those boards instead.
[See discussion here.](http://shop.prusa3d.com/forum/software-f13/enabling-auto-leveling-in-firmware-t416-s40.html)
 2016-03-22 00:56:31 +01:00
jbrazio
04e57e2b5e Update the Hephestos 2 default config 2016-03-21 18:20:29 +00:00
esenapaj
f260e00a72 fix spelling 
Thermister -> Thermistor
 2016-03-21 20:57:03 +09:00
Scott Lahteine
b1a3a95ad4 Tweak controllerFan to save a cycle or two 2016-03-20 22:11:09 -07:00
Scott Lahteine
04a6924633 Make DISABLE_INACTIVE_X, etc., the same as DISABLE_X (etc.) if missing 2016-03-20 22:10:52 -07:00
Scott Lahteine
15fccd43ee Fix spacing of an #endif 2016-03-20 20:32:55 -07:00
Scott Lahteine
be08eb6153 Merge pull request #3194 from jbrazio/feature/add-pt_pt-utf8 
Add pt_pt-utf8 language pack and fix some minor compiler warnings
 2016-03-20 17:42:45 -07:00
Scott Lahteine
d1ff7959b7 Merge pull request #3188 from esenapaj/patch-1 
follow-up the commit b82d91e
 2016-03-20 17:39:52 -07:00
Scott Lahteine
10caee2b7c Merge pull request #3187 from AnHardt/target_extruder_number 
Fix extrudernum in MSG_INVALID_EXTRUDER
 2016-03-20 17:15:22 -07:00
Scott Lahteine
1cc316f1fd Merge pull request #3082 from thinkyhead/updated_2820 
This is quite comprehensive. If probes are disabled in any case when they shouldn't be, I'm sure we will hear about it soon.
 2016-03-20 17:10:38 -07:00
Scott Lahteine
7bf5d117e7 Merge pull request #3069 from thinkyhead/rc_delta_compat_m48 
Delta-compatible extensions to M48
 2016-03-20 17:09:18 -07:00
Scott Lahteine
db8ab50c66 Merge pull request #3192 from tnw513/fix_lang 
Added missing translations.
 2016-03-20 17:07:00 -07:00
Scott Lahteine
06332f20be Merge pull request #3113 from jbrazio/bugfix/3061-stop-print-time-counter 
Stop print timer with M105/M109
 2016-03-20 17:05:07 -07:00
jbrazio
92a7d4515a Missing coma comment correction for the default cofig file 2016-03-20 23:23:11 +00:00
jbrazio
1aa531a3db Missing coma comment correction for all config files 2016-03-20 23:21:45 +00:00
jbrazio
68dda08fff Added pt_pt-utf8 language pack; Fixed some minor compiler warnings; Harmonize file suffix for the current existing UTF8 language packs; Updated all configuration files to reflect the new language packs 2016-03-20 23:14:24 +00:00
Silvio Didonna
f8c10d6b0e Added missing translations. 2016-03-20 22:34:00 +01:00
esenapaj
468df96b0f follow-up the commit b82d91e 
follow-up the commit b82d91eca6
 2016-03-20 20:57:14 +09:00
AnHardt
338b69c24b Fix extrudernum in MSG_INVALID_EXTRUDER 
SERIAL_ECHO is not very good in printing uint8_t - so cast. to int.
 2016-03-20 11:39:06 +01:00
AnHardt
b39b54031b Fix KEEPALIVE_STATE 
Add return to NOT_BUSY for M105
Replace WAIT_FOR_USER with PAUSED_FOR_USER

Add Travis test for FILAMENTCHANGEENABLE
 2016-03-20 10:41:56 +01:00
Scott Lahteine
32f75749e4 Merge pull request #3117 from Blue-Marlin/thermal-protection 
Improve the descriptions for THERMAL_PROTECTION
 2016-03-19 23:41:05 -07:00
esenapaj
37eaa1406b follow-up the PR #3180 2016-03-20 15:33:02 +09:00
esenapaj
198d5d56fd follow-up the PR #3183 2016-03-20 13:58:05 +09:00
Scott Lahteine
4119cef32f Merge pull request #3180 from clexpert/RCBugFix 
Czech language specific changes
 2016-03-19 20:18:05 -07:00
Scott Lahteine
da94bcfebb Merge pull request #3184 from thinkyhead/fix_command_injection 
Patch drain_queued_commands_P
 2016-03-19 20:12:16 -07:00
Scott Lahteine
41145e6e81 Patch drain_queued_commands_P 
Fix a SNAFU that should have been caught in #3012
 2016-03-19 20:10:41 -07:00
Scott Lahteine
3ce0c5063f Merge pull request #3183 from thinkyhead/rc_lcm1602_support 
Also closes #3181.
 2016-03-19 19:28:50 -07:00
CoderSquirrel
eda95d8bed Add support for LCM1602 16x2 I2C LCD adapter 2016-03-19 19:26:44 -07:00
Scott Lahteine
59483221d5 Move stepper DAC to a separate file 2016-03-19 19:24:26 -07:00
Scott Lahteine
5d0570cea0 Make digitalPotWrite depend on HAS_DIGIPOTSS 2016-03-19 19:24:26 -07:00
Scott Lahteine
f96bc03081 Add M907-M910 g-codes support for Printrbot Rev. F 2016-03-19 19:24:26 -07:00
Stephanie
6843b78f99 Add support for Printrboard RevF 
The PrintrBoard Rev F utilizes a mcp4728 DAC to set motor current. Printrbot's implementation utilizes 2 new M-codes to set and write the DAC settings to the DAC EEPROM: `M909` (Read DAC) and `M910` (Write DAC). `M907` is re-used to set value, `M908` for direct control.

The Pins file for the RevF board is included.
 2016-03-19 16:43:37 -07:00
Petr Zahradnik
98392782ea Update Configuration.h 2016-03-19 20:45:13 +01:00
Petr Zahradnik
daa52124b0 Update language_cz.h 2016-03-19 20:43:28 +01:00
Blue-Marlin
3166aed087 Improve the descriptions for THERMAL_PROTECTION 2016-03-19 14:08:59 +01:00
Scott Lahteine
a02ae36ae8 Include M65 "ABC" parameters in EEPROM 
Addressing #2773
 2016-03-19 05:52:20 -07:00
Scott Lahteine
cf7c444aff Apply unknown_position_error elsewhere 2016-03-19 05:13:40 -07:00
Scott Lahteine
eda5190581 Check for known position in M48 2016-03-19 05:13:40 -07:00
Scott Lahteine
68085ca855 Updated M48 friendly for DELTA 
Partial implementation with reference to MarlinFirmware/Marlin#3011
 2016-03-19 05:13:40 -07:00
Scott Lahteine
6a3529247f "Homing" as a translatable string 2016-03-19 04:41:03 -07:00
Scott Lahteine
c97c2dcaf7 Use const parameters instead of static casting 
Alternative fix to #3149
 2016-03-19 03:36:53 -07:00
Scott Lahteine
38b0082bf2 Additional tweaks to M42 exit conditions 2016-03-19 03:10:18 -07:00
Scott Lahteine
4bbea5124d Support for multiple PWM fans 2016-03-19 03:10:18 -07:00
Scott Lahteine
637cc03686 Fix M109 so it won't wait for cooling 
Addressing issue #2767
 2016-03-19 03:00:58 -07:00
AnHardt
3f45a1acf9 Check probes only when deployed 
Aim: Test probes in update_endstops only when activated

Changes:
Configurations
 Add define for FIX_MOUNTED_PROBE to handle the situation where formerly ENDSTOPS_ONLY_FOR_HOMING had to be set, or lowering the nozzle below Z_PROBE_OFFSET_FROM_EXTRUDER could give an "endstop hit" message.
 Add define for Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN to indicate a common situation, that we have a probe but it is connected to an endstop pin
 Add some comments
 Shift some entries to have related things together.

Conditionals.h
 We have a probe (HAS_Z_MIN_PROBE) if one of the pins is defined AND one of the probes is defined.

SanityCheck.h
 Add some tests if the probe is connected and if we have defined a probe.

stepper.cpp
 Changes to test the probe only when it is deployed (z_probe_is_active).
 Test update_endstops() when the probe is deployed.

MarlinMain.cpp
 a. set and reset z_probe_is_active in deploy_z_probe(), stow_z_probe() and dock_sled()
 b. set and reset z_probe_is_active in the case a z-servo is moved to a defined position. The only remaining unhandled servo move is in M280 where we do not end in a defined position. If you want to handle a probe use M401/402
 c. skip deploying/stowing when already deployed/stowed in the dedicated deploy/stow functions.
 d. Handle the new FIX_MOUNTED_PROBE in parallel to a servo driven probe/endstop.

 To do: In another PR. handle all probes in deploy/stow_z_probe.
 Sort out SERVO_LEVELING vs. HAS_SERVO_ENDSTOPS.
 2016-03-19 02:00:08 -07:00
Scott Lahteine
4634feaeab Merge pull request #3012 from thinkyhead/fix_command_injection 
Use a serial line buffer to prevent queue corruption
 2016-03-19 01:43:54 -07:00
Scott Lahteine
9bf87aac6a Merge pull request #3127 from thinkyhead/rc_core_babystepping 
Implement BABYSTEPPING for COREXY and COREXZ
 2016-03-18 23:25:26 -07:00
Scott Lahteine
4ae03df5c2 Merge pull request #3109 from thinkyhead/rc_host_keepalive 
Provide feedback to hosts when busy
 2016-03-18 23:22:29 -07:00
Scott Lahteine
963a92ceda Patch idle forevermore 2016-03-18 22:38:35 -07:00
Scott Lahteine
7ec7bb31c4 Send a Busy signal to hosts during long processes, wait for input, etc 
If Marlin is blocking the serial input or command queue for any length
of time (for example more than 2 seconds), it needs to send a message
to serial out to inform the host that it is busy. Marlin should only
send these messages out when busy, and preferably not when trying to
print formatted output.
 2016-03-18 22:38:35 -07:00
esenapaj
8d580ea7e8 follow-up the PR #3114 
follow-up the commit d56c6af24e
 2016-03-19 13:17:34 +09:00
Scott Lahteine
d9e1f22682 BABYSTEPPING requires ULTRA_LCD 2016-03-18 18:22:53 -07:00
Scott Lahteine
e5fd43f343 Implement BABYSTEPPING for COREXY and COREXZ 2016-03-18 18:22:53 -07:00
Scott Lahteine
80277cc9c8 drain_queued_commands_P now returns true if there are more 2016-03-18 17:56:48 -07:00
Scott Lahteine
8fe7420310 Use a separate serial line buffer 2016-03-18 16:46:20 -07:00
Scott Lahteine
7d25c107a8 Merge pull request #3149 from esenapaj/patch-1 
suppress warnings
 2016-03-18 15:40:14 -07:00
Scott Lahteine
d56c6af24e Merge pull request #3114 from thinkyhead/rc_reverse_lcd_menu 
Option to reverse the click-wheel direction in menus
 2016-03-18 15:39:29 -07:00
Scott Lahteine
cc291aeb3c Move definition of "blink" to main ultralcd file 2016-03-17 18:19:05 -07:00
Scott Lahteine
e7e1866589 Merge pull request #3161 from Alex9779/fix_InitialExtruderDirection 
Fix initial extruder direction for second/third/fourth extruder if they run inverted to the first
 2016-03-16 12:58:10 -07:00
Scott Lahteine
57e82cacc9 Merge pull request #3156 from esenapaj/patch-3 
Fix CardReader::lsDive()
 2016-03-16 12:48:22 -07:00
Alexander Leisentritt
4338813814 save last extruder and set stepper directions too in case the extruder changed 
fixes MarlinFirmware/Marlin#3144 and MarlinFirmware/Marlin#3083
 2016-03-16 20:20:34 +01:00
Scott Lahteine
8f24475e02 Simplify limiting encoderLine in END_MENU 2016-03-16 04:05:41 -07:00
Scott Lahteine
fbef2f5b61 Implement reverse menu direction in ultralcd.cpp 2016-03-16 04:03:49 -07:00
Scott Lahteine
b8b51d8da8 Add the REVERSE_MENU_DIRECTION option 2016-03-16 04:02:40 -07:00
Scott Lahteine
999a76dbdf Merge pull request #3157 from esenapaj/patch-4 
Use variable in lcd_erase_line()
 2016-03-16 02:46:42 -07:00
Scott Lahteine
e8fa843c2d Merge pull request #3164 from epatel/epatel/RCBugFix 
Fix for #3160 MESH_BED_LEVELING broke correct G1 movement in Z
 2016-03-16 02:40:54 -07:00
Scott Lahteine
fc04b587cf Merge pull request #3147 from thinkyhead/rc_stringify_macro 
Promote STRINGIFY to macros.h
 2016-03-15 17:37:03 -07:00
Scott Lahteine
d7c6fd5c2f Merge pull request #3146 from thinkyhead/rc_enabled_true_false 
Support "true" and "false" in the ENABLED macro
 2016-03-15 17:35:55 -07:00
Edward Patel
cb0dbfa3b5 Fix for #3160 MESH_BED_LEVELING broke correct G1 movement in Z 2016-03-16 01:26:00 +01:00
esenapaj
a15c5d222a Use variable in lcd_erase_line() 
lcd_erase_line() is called with argument, but the argument is ignored by lcd_erase_line().
 2016-03-16 02:59:06 +09:00
esenapaj
609c0d46d9 Fix CardReader::lsDive() 
If comparison between signed char(-128 ~ +127) and DIR_NAME_DELETED(uint8_t const 0XE5, it's +229),
it makes incorrect result.
 2016-03-16 02:47:58 +09:00
Scott Lahteine
2ef49a9d53 Wrap DEFAULT_Ki, DEFAULT_Kd, PID_dT 
Addition to #3140
 2016-03-15 03:49:44 -07:00
Scott Lahteine
eb8cf29464 Merge pull request #3151 from hydrocat/RCBugFix 
Uptades the pt-br translation
 2016-03-15 02:46:46 -07:00
Scott Lahteine
6e1bc03d3b Additional wrapping for #3140 2016-03-15 01:18:58 -07:00
Scott Lahteine
cc9968f893 Patch spacing in #3140 2016-03-15 01:18:58 -07:00
Scott Lahteine
1c384930f3 Merge pull request #3140 from thinkyhead/rc_fix_macro_expansion 
Wrap macros to prevent bad expansions
 2016-03-15 00:25:34 -07:00
VITORIO MIGUEL PRIETO CILIA
de2cca73ac Uptades the pt-br translation 2016-03-14 21:16:57 -03:00
esenapaj
a4314c4907 Use local variable in recalc_delta_settings() 
diagonal_rod hadn't been used anywhere.
 2016-03-15 06:47:27 +09:00
esenapaj
8de7a6f9b1 suppress warnings 2016-03-15 06:34:02 +09:00
Scott Lahteine
9418b4f2f3 Promote STRINGIFY to macros.h 2016-03-13 23:15:17 -07:00
Scott Lahteine
4b648793f2 Use ENABLED with DISABLE_[INACTIVE_][XYZ] 2016-03-13 22:15:45 -07:00
Scott Lahteine
73a59a4e45 Allow ENABLED(b) to work with "true" and "false" 2016-03-13 22:15:01 -07:00
Blue-Marlin
c73f1b2471 Extend stack_overflow_protection for lcd_move_e and _lcd_level_bed 
Extend stack_overflow_protection for lcd_move_e() and _lcd_level_bed() with
a refined method of 3050.
 2016-03-13 13:59:44 +01:00
Scott Lahteine
f4a3efd35e Merge pull request #3116 from thinkyhead/rc_fix_value_edit_bug 
Fix value edit click bug
 2016-03-13 04:08:43 -07:00
Scott Lahteine
3f5fbbd398 Merge pull request #3124 from jbrazio/bugfix/update-g29-auto-level-bed-topography 
Update the bed topography output done by G29
 2016-03-13 03:51:43 -07:00
Scott Lahteine
c16c47954c Merge pull request #3141 from esenapaj2/RCBugFix 
follow-up the PR #3131
 2016-03-13 03:37:39 -07:00
Scott Lahteine
30c3a21d1f Merge pull request #3112 from thinkyhead/rc_support_MAX31855 2016-03-13 03:30:48 -07:00
Scott Lahteine
81d759efb6 Merge pull request #3138 from jbrazio/bugfix/m109-r-could-wait-forever 2016-03-13 03:26:34 -07:00
Scott Lahteine
2179f598bf Merge pull request #3122 from thinkyhead/rc_group_filament_change 2016-03-13 03:25:38 -07:00
Scott Lahteine
62a9b9902d Merge pull request #3133 from thinkyhead/rc_machine_uuid_in_m115 2016-03-13 03:23:54 -07:00
Scott Lahteine
f928894c38 Merge pull request #3132 from thinkyhead/rc_heating_failed_err 2016-03-13 03:23:14 -07:00
esenapaj2
236a44c83b follow-up the PR #3131 
follow-up the commit 7326d63ce0
update Configration_adv.h of Hephestos2
delete unnecessary spaces
 2016-03-13 19:12:39 +09:00
Scott Lahteine
f9ded2a7c4 Wrap macros to prevent bad expansions 2016-03-12 22:38:55 -08:00
jbrazio
a645860431 All print timer related activity now uses print_job_start(), print_job_timer() or print_job_stop() 2016-03-12 07:16:39 +00:00
jbrazio
1981e53d68 M109 R option if misused could cause a wait-forever situation 2016-03-12 06:24:24 +00:00
Scott Lahteine
7976e29399 Use MACHINE_UUID in M115 
Addressing #2879. The M115 report should display `MACHINE_UUID` but it
always displays `UUID`.
 2016-03-11 05:34:48 -08:00
Scott Lahteine
81aab828e2 Fix a "Heating failed" error 
Addressing #3085. If the target_temperature is set directly it never invokes or disables the timer set in `start_watching_heater`, so after _stopping a print_ or turning off _all heaters_ you could get a “Heating failed” error.
 2016-03-11 05:07:48 -08:00
Scott Lahteine
0c48eaf3de Expose motor current in more configs, disable by default 2016-03-11 02:25:36 -08:00
Elijah Snyder
e8b10d2836 Adding PWM_MOTOR_CURRENT flag to help expose PWM_MOTOR_CURRENTS in Configuration_adv.h similar to DIGIPOT_MOTOR_CURRENT 2016-03-11 02:25:36 -08:00
João Brázio
4d4a842cfb Update the bed topography output done by G29 2016-03-10 13:24:17 +00:00
Scott Lahteine
89838cdb10 Move step macros to stepper_indirection.h 2016-03-10 04:34:55 -08:00
João Brázio
793cd0ae3b Clean up the code a bit 2016-03-10 11:52:43 +00:00
Scott Lahteine
27f244ba2c Support MAX31855 as Temperature Sensor -3 2016-03-10 02:49:54 -08:00
Scott Lahteine
ce639b8b03 Group FILAMENT_SENSOR options together 2016-03-10 02:41:37 -08:00
Scott Lahteine
3fd31976c3 Reduce code in stepper.cpp with macros 2016-03-10 01:42:58 -08:00
Scott Lahteine
b45a0c4c60 Fix bugs in edit submenus so they return to origin 
Expected behavior: After editing a value the menu should return to the
previous place with the edited item selected.
Actual behavior: Either the top (back) item from the previous screen is
selected, or the menu jumps up another level.
Solution: Pass the correct arguments to `lcd_goto_menu` on click when
editing a value.
 2016-03-09 21:06:56 -08:00
jbrazio
986b508ff7 Print timer now stops when it sees the last extruder temperature being shutdown 2016-03-08 18:11:02 +00:00
AnHardt
fd5414c6ea Z_RAISE_BEFORE_HOMING -> MIN_Z_HEIGHT_FOR_HOMING 
rebased
corrected spelling
changed to #elif for error

Still with MIN_Z_HEIGHT_FOR_HOMING but con be done with (folder wide) search-replace when we have a better name.
 2016-03-08 17:50:23 +01:00
Scott Lahteine
b7928a000a Merge pull request #3108 from AnHardt/M110+ 
M110 and M29 rework
 2016-03-08 03:54:07 -08:00
Scott Lahteine
5cba0b4187 Merge pull request #3111 from thinkyhead/rc_drop_old_condition 
Drop obsolete test for leading "N"
 2016-03-08 03:07:25 -08:00
Scott Lahteine
302d1bfbc4 Drop obsolete test for leading "N" 2016-03-08 02:25:11 -08:00
AnHardt
37b857e8ec M110 ang M29 rework 
Add 'ok' output for G29 actually closing the file.
Handle M110 when received without linenumber/checksumm.
 2016-03-07 22:27:01 +01:00
esenapaj2
29e09c7c3e update example configurations 
update old comments
update or delete deprecated definitions
complement forgotten updates
adjust spacing
some cosmetic changes
 2016-03-07 22:03:33 +09:00
Scott Lahteine
fac85f6fa1 Merge pull request #3102 from jbrazio/bugfix-g28-multiple-z-movements 
Bugfix: G28 was lifting Z-axis multiple times
 2016-03-07 03:52:00 -08:00
jbrazio
642e3699ce Z-axis was being lift multiple times if Z_SAFE_HOMING was enabled and Z_RAISE_BEFORE_HOMING was greater than zero 2016-03-07 03:49:11 +00:00
Scott Lahteine
501f63802a Merge pull request #3077 from Blue-Marlin/watchdogreset-in-kill 
Add Watchdog timer reset in kill()
 2016-03-06 16:21:39 -08:00
Scott Lahteine
1002eb67c8 Update name of st_get_axis_position_mm in stepper.h 2016-03-06 15:46:39 -08:00
Jaroslav Škarvada
d229c58df6 Fixed Makefile to work with Melzi2 boards on arduino-1.6.x 
- also by default use ${HOME}/Arduino as install directory which may be more
sane, especially with arduino packages provided by distributions
- bump arduino version to 106 (this seems to be useless)
- program firmware through the USB serial which is more comfortable way how
to program the firmware
- use 57600 programing speed by default which seems to be more reliable
with arduino bootloaders (at least with those shipped with the Melzi2 boards)

Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
 2016-03-06 20:12:01 +01:00
Jaroslav Škarvada
7dde761aa6 Fix MELZI_MAKR3D to use correct motherboard 
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
 2016-03-06 19:33:33 +01:00
Scott Lahteine
eafbc5e0cc Add AJ4P pins and fix RAMBO pins 2016-03-06 05:52:01 -08:00
Scott Lahteine
cf792fd8d8 Update configurations to use RAMPS 1.4 2016-03-06 05:52:01 -08:00
Scott Lahteine
cacf04f8a7 Base RAMPS-like boards on RAMPS 1.4 2016-03-06 05:52:00 -08:00
Scott Lahteine
50e3482e0a Handle RAMPS 1.3 as the special case 2016-03-06 05:52:00 -08:00
Scott Lahteine
679be3294f Rename RAMPS 1.3 pins for RAMPS 1.4 2016-03-06 05:52:00 -08:00
Scott Lahteine
f18d3f451a Limit LCD move_to_x/y coordinates for deltas 
Related to MarlinFirmware/MarlinDev#270
 2016-03-06 05:52:00 -08:00
Scott Lahteine
988332c67a Cosmetic tweaks from dev 2016-03-06 05:52:00 -08:00
Scott Lahteine
2690d8568e DOGLCD width/height in Conditionals.h 2016-03-06 05:51:59 -08:00
Scott Lahteine
614febaaf3 Fix acceleration limits 
See: https://github.com/Ultimaker/Marlin/pull/7
 2016-03-06 05:51:59 -08:00
Scott Lahteine
13ef12ad3f Fix power calculations 
As suggested by @max-pau in #3073 - #3074
 2016-03-06 05:51:59 -08:00
Scott Lahteine
e2b022cce2 Include #3053 2016-03-06 05:51:59 -08:00
Scott Lahteine
5cba0210f2 Small patch to Z_SAFE_HOMING comment 2016-03-06 05:51:58 -08:00
Scott Lahteine
6165fd41a5 Fix Hephestos 2 and other configs 2016-03-06 05:51:58 -08:00
Scott Lahteine
71718d888a Fix typos in check_axes_activity 2016-03-06 05:51:58 -08:00
Lukas Abfalterer
83795d3e63 deleted double used comments 2016-03-06 05:51:58 -08:00
jbrazio
143ad74db7 Update PROBE_OFFSET_FROM_EXTRUDER comment section in all example config 
files.
 2016-03-06 05:51:58 -08:00
jbrazio
b0f5ba0232 Update the PROBE_OFFSET_FROM_EXTRUDE comment section 
This changes have being discussed at MarlinFirmware/Marlin#2849.
 2016-03-06 05:51:57 -08:00
jbrazio
02b131b552 Replaced stock BQ PID values with fine tuned ones generated using M303 2016-03-06 05:51:57 -08:00
jbrazio
45dc8a51f3 Added readme file for bqh2 and disabled the SLOWDOWN config flag 2016-03-06 05:51:57 -08:00
Scott Lahteine
6a21180bd4 Implemented BQ ZUM Mega 3D board layout as an override to RAMPS 1.3 2016-03-06 05:51:57 -08:00
jbrazio
b18816fcbf Fine tuned XYJERK. 
Disallowed the Z_PROBE_OFFSET_RANGE_MAX to be greater than zero.
 2016-03-06 05:51:57 -08:00
jbrazio
be83036212 Applying suggestions by @thinkyhead at MarlinFirmware/Marlin#3049. 
- Remove the forced activation of SDSUPPORT, I guess people may use the ZUM
3D board and not the LCD module.
 - Fixed the tab issue within boards.h file.
 2016-03-06 05:51:56 -08:00
jbrazio
b82d91eca6 Added configuration example for the BQ Hephestos 2 3D printer. 
Added support for BQ ZUM Mega 3D board and stock Hephestos 2 thermistor.
 2016-03-06 05:51:56 -08:00
Scott Lahteine
45bcc43e48 Don't override SOURCE_CODE_URL in Default_Version.h 
- Defining `SOURCE_CODE_URL` in `Default_Version.h` overrides it
elsewhere. So don’t define it there.
- Also fix up `language.h` so no `#undef` will be needed.
 2016-03-06 05:51:56 -08:00
Scott Lahteine
ef68c1910c Check that the temperature is close to target 2016-03-06 05:51:56 -08:00
Scott Lahteine
ea9fd1200b Fix M109 so it won't wait for cooling 
Addressing issue #2767
 2016-03-06 05:51:56 -08:00
Scott Lahteine
e4945b30d2 sbi and cbi are deprecated 2016-03-06 05:51:55 -08:00
Scott Lahteine
ff13070b59 Use _BV macros, patch up others 2016-03-06 05:51:55 -08:00
Scott Lahteine
209f5f21e0 Use macros where possible 
Apply `constrain`, `NOMORE`, `NOLESS` and `CRITICAL_SECTION` macros
wherever possible.
 2016-03-06 05:51:55 -08:00
Scott Lahteine
c8f76bb8aa Create BITSET/BITCLR macros 2016-03-06 05:51:55 -08:00
Scott Lahteine
adc25db8c4 Merge pull request #3005 from thinkyhead/rcbugfix_eeprom 
Fix layout descr. in configuration_store.cpp
 2016-03-06 00:31:44 -08:00
Scott Lahteine
e7cf85b922 Merge pull request #3013 from thinkyhead/esenapaj-patch-1 
Enhanced #3010 - formal Mesh/Manual dependency
 2016-03-06 00:30:02 -08:00
Scott Lahteine
6e64895c30 Merge pull request #3001 from AlwaysTinkering/RCBugFix 
Rc bug fix - Fix for issue #2931
 2016-03-06 00:20:29 -08:00
Scott Lahteine
34b8b9f0f5 Merge pull request #2995 from thinkyhead/rcbugfix_corexy_corexz 
Add CORE support to st_get_position_mm (and elsewhere)
 2016-03-06 00:17:03 -08:00
Scott Lahteine
1e20949afb Merge pull request #3092 from thinkyhead/rc_2860_printrbot_lcd 
Fix Printrboard with LCD (redo)
 2016-03-06 00:14:29 -08:00
Scott Lahteine
f5972c4d2c Merge pull request #2994 from AnHardt/Inerrup-save-serial 
Interrupt safe serial --- Guard against non-atomic variable changes from interrupt routines
 2016-03-05 22:25:12 -08:00
Scott Lahteine
3a3d358df9 Fix Printrboard with LCD (redo) 
Based on #2860 - rebased for RCBugFix
 2016-03-05 22:13:00 -08:00
Scott Lahteine
eb85342fd9 Merge pull request #2989 from AnHardt/fix2661 
Pre home display - Stepper release
 2016-03-05 21:30:17 -08:00
Scott Lahteine
14f3ca1b2e Merge pull request #2978 from thinkyhead/tool_offset_abl_rcbugfix 
Apply bed leveling matrix when switching extruders
 2016-03-05 21:23:25 -08:00
Scott Lahteine
91fcdc2b99 Merge pull request #3090 from thinkyhead/rc_spelling 
Various minor spelling corrections
 2016-03-05 20:50:34 -08:00
Scott Lahteine
772460a7b8 Various minor spelling corrections 
Redo of #2939 rebased against RCBugFix
 2016-03-05 20:41:15 -08:00
lrpirlet
0fb507a75d correct raise_z_for_servo 2016-03-05 20:19:53 -08:00
Scott Lahteine
04a0d45c22 Merge pull request #2821 from MarlinFirmware/ReinitializeDisplay 
Fix status LEDs update when reinitializing the display
 2016-03-05 15:31:49 -08:00
Blue-Marlin
b4e5e0f11d Add Watchdog reset in kill() 
Add watchdog reset in the kill loop to simplify recovering.
 2016-03-04 00:35:18 +01:00
Scott Lahteine
547d35a921 Merge pull request #3067 from Blue-Marlin/ALARM_PIN 
Remove unused ALARM_PIN
 2016-03-02 20:20:26 -08:00
Scott Lahteine
79778d46d9 Merge pull request #3066 from Blue-Marlin/Fix-disable_all_heaters() 
Fix disable_all_heaters() for MAX6675
 2016-03-02 17:35:08 -08:00
Blue-Marlin
a68228bf55 Remove unused ALARM_PIN 
Remove unused ALARM_PIN from all the Configuration.h's
 2016-03-02 14:29:49 +01:00
Scott Lahteine
9eb4aceee4 Merge pull request #2986 from thinkyhead/enable_watchdog 
Enable USE_WATCHDOG by default
 2016-03-02 05:29:42 -08:00
Blue-Marlin
0631541166 Fix disable_all_heaters() for MAX6675 2016-03-02 14:17:23 +01:00
Scott Lahteine
222d13d5ed Merge pull request #3051 from thinkyhead/rcbugfix_dual_axis_offset 
Code cleanup in gcode_T
 2016-03-02 03:45:40 -08:00
Scott Lahteine
186629aee8 Merge pull request #3057 from jbrazio/3034-z_raise_after_probing_fix 
Fix Z_RAISE_AFTER_PROBING for non DELTA printers
 2016-03-02 03:14:27 -08:00
Scott Lahteine
a42fb35c56 Merge pull request #3050 from Blue-Marlin/fix-1166 
Temporary workaround for stack overflow
 2016-03-01 11:33:19 -08:00
jbrazio
67e15aac3d As pointed out by @Blue-Marlin the previous code would raise the Z axis 
twice for a servo based probe.
 2016-03-01 00:22:48 +00:00
jbrazio
17cc2a9663 Z_RAISE_AFTER_PROBING value was being ignored by Marlin because 
raise_z_after_probing() was only called if the printer type was set to a
DELTA or if the printer had a docking sled for the probe.
 2016-02-29 15:48:26 +00:00
Scott Lahteine
252f4a75cd Merge pull request #3043 from oxivanisher/RCBugFix 
Example configuration for Kossel XL
 2016-02-28 23:57:13 -08:00
Scott Lahteine
fd1243c184 Merge pull request #3052 from thinkyhead/rc_fix_m145_eeprom_output 
Fix "M145" output in M503 report
 2016-02-28 23:43:08 -08:00
Scott Lahteine
0bc648353f Merge pull request #3031 from tnw513/RCBugFix 
Fix board type for Hephestos: RAMPS 1.4
 2016-02-28 23:23:01 -08:00
AnHardt
f27c2b6b4b Reimplement #2892 
Include #2892 to fix the isHeating symbol in the extruder graphics
 2016-02-28 23:20:30 +01:00
AnHardt
615bec2329 Activate warning about possible reduced accuracy by default 
Renamed `WARN_REDUCED_ACCURACY` to `DISABLE_REDUCED_ACCURACY_WARNING`

Changed the condition for blinking from
```
#if ENABLED(WARN_REDUCED_ACCURACY)
```
to
```
#if DISABLED(DISABLE_REDUCED_ACCURACY_WARNING)
```
 2016-02-28 23:20:21 +01:00
AnHardt
1c889cd303 Refresh previous_cmd_ms during run_z_probe() 
Refresh previous_cmd_ms during run_z_probe() to prevent:
stepper shutdown for expired DEFAULT_STEPPER_DEACTIVE_TIME
and extrudes for expired EXTRUDER_RUNOUT_SECONDS
(https://github.com/MarlinFirmware/MarlinDev/issues/238)
 2016-02-28 23:20:12 +01:00
AnHardt
4b02f33e69 Distribute config-changes to the other configurations 2016-02-28 23:20:04 +01:00
AnHardt
be24fdacea The same changes to the axis-letters now for the char-displays 
Exactly the same - copy/paste.
 2016-02-28 23:19:54 +01:00
AnHardt
5b0f659355 Changes for graphics displays 
Replaced displaying "---" instead of the value of a coordinate when
unhomed or with reduced precision
with blinking the coordinate-prefix-character ('X','Y','Z').
For "unhomed" a '?' is shown every second second - until that axis is
homed. The value displayed is, as before the "---" where displayed, the
relative to the reset position coordinate value.
When the axis stepper was disabled, now we can display a hint on that,
by showing a blinking ' ' instead of the axis letter, when
WARN_REDUCED_ACCURACY is defined.

I suppose the code itself is here the better documentation.

A '+/-' character is in non of our charsets so i decided for a '?' for
now to reduce the work.
There is no additional space on the displays one could use to display
the information, so replacing something is the only option. As the axis
letters are totally redundant with their positions on the display they
contain the least information.
So my decision was to overwrite them.
 2016-02-28 23:19:32 +01:00
AnHardt
32ae9f9ab7 Fix stepper shutdown during waiting for temperatures 
In the wait loops of M109 M190 idle() is called, what checks
stepper_inactive_time against previous_cmd_ms.
Because we can be several minutes inside the loop, resetting
previous_cmd_ms only outside the loop caused stepper shutdowns.

The name of previous_cmd_ms does not really reflect its use. It's set
not only when a new command was received or executed but also in many of
the movement routines. For that the little extension of using it during
the wait will (hopefully) not hurt.

# Conflicts:
#	Marlin/Configuration_adv.h
 2016-02-28 16:58:50 +01:00
AnHardt
b6e69e71ce Make stepper shutdown after inactivity dependent 
Make stepper shutdown after inactivity dependent on a new set of
#defines.
DISABLE_INACTIV_X
DISABLE_INACTIV_Y
DISABLE_INACTIV_Z
DISABLE_INACTIV_E

And make exemplaric Configuration.
Names can be discussed.

This makes the disabling of the steppers independent from the DISABLE_?
settings witch shut down the steppers immediately.
 2016-02-28 16:58:42 +01:00
AnHardt
051325ccd7 Introduce axis_homed 
Introduce additional variable axis_homed to replace axix_known_position
when the coordinate display should indicate the axis is not homed.
This is to distinguish between "not homed" and "inexact position possible
because stepper was disabled".

# Conflicts:
#	Marlin/ultralcd_implementation_hitachi_HD44780.h
solved
 2016-02-28 16:58:28 +01:00
AnHardt
e736779d7e blink for char-lcds 
Implement and test blinking for char-lcds

# Conflicts:
#	Marlin/ultralcd_implementation_hitachi_HD44780.h
solved
 2016-02-28 16:58:19 +01:00
Scott Lahteine
7253a1971d Fix "M145" output in M503 report 2016-02-27 22:28:08 -08:00
Scott Lahteine
d118e3f985 Merge pull request #3044 from thinkyhead/rc_gcode_spaces 
Fix GCode handling of spaces between command letter and first digit
 2016-02-27 22:21:28 -08:00
Scott Lahteine
100271e6ac minor cleanup in gcode_T 2016-02-27 19:56:56 -08:00
Blue-Marlin
fd9e94e5a4 Fix crashes when the Z axis is moved via LCD 
Fix crashes when the Z axis is moved via LCD
by calling `plan_buffer_line` only when there is enough room in the
planner buffer, to avoid endless recursion.
A brief description about what went wrong is in #1166
 2016-02-28 00:59:47 +01:00
Scott Lahteine
8dccd5a7ea Merge pull request #3018 from CONSULitAS/RCBugFix_K8200_backinsync 
K8200: sample config back in sync
 2016-02-27 05:22:12 -08:00
Scott Lahteine
6a4f06d35d Fix GCode handling of spaces between command letter and first digit 2016-02-26 18:42:59 -08:00
Marc Urben
68eae2b5a8 added kossel xl example configuration 2016-02-27 01:48:45 +01:00
Silvio Didonna
eb5817675d Fix board type: RAMPS 1.4 2016-02-25 15:52:41 +01:00
AnHardt
cb88fdd242 Protect MarlinSerial against interrupts 
Protect MarlinSerial against interrupts
by shielding the CRITICAL_SECTIONs

Now with a test if RX_BUFFER_SIZE is in the required range.
Code in peek() and read() is now optimized for readability and showing the similarity between the two.

Maybe a bit overprotected in checkRx() and store_char(), but now some days without detected errors from this source.
 2016-02-24 17:18:12 +01:00
AnHardt
dc0f41868e Make rx tail/head atomic 2016-02-24 15:51:34 +01:00
CONSULitAS
ea8409ad5d Fix: current_command_args contains command 
@thinkyhead
Hi Scott,
your code from a0f362c@thinkyhead is great, but you forgot to skip the
command.
Symptom `M117 Test`shows `M117 Test` on LCD instead of `Test`.

see also
https://github.com/MarlinFirmware/Marlin/commit/a0f362c735401ebbcd95de3f
6f8e3c2f17ecc770 lines 941, 2851 and so on

Greetings and welcome back

Jochen
 2016-02-24 09:35:04 +01:00
Scott Lahteine
9a3408e58f Merge pull request #3024 from thinkyhead/rc_remove_steps_mm_e 
Remove obsolete STEPS_MM_E setting
 2016-02-23 23:37:09 -08:00
Scott Lahteine
1093c780c8 Remove obsolete STEPS_MM_E setting 2016-02-23 01:11:58 -08:00
CONSULitAS
a4fe6a45ae K8200: sample config back in sync 
* Configuration.h:
  * updated header comment
  * new UUID feature used
  * sync to default config
  * typos fixed
  * changes better documented
  * reflect change in SDSUPPORT feature
* Configuration_adv.h
  * updated header comment
  * thermal protection tuned to work with K8200
  * homing tuned
  * sync to default config
  * typos fixed
  * changes better documented
  * reflect change in LCD features
  * use long filenames
  * use Watchdog
  * use Babystepping
  * use Auto Filament Change
 2016-02-21 16:06:25 +01:00
Scott Lahteine
c2e5c6c12c Nest Manual Bed Leveling options 
This formalizes the dependency of MANUAL_BED_LEVELING on
MESH_BED_LEVELING
 2016-02-20 20:35:10 -08:00
Scott Lahteine
042a6a0a37 Extend existing MESH_BED_LEVELING test 2016-02-20 20:35:10 -08:00
esenapaj
08b3147791 sanity check for MANUAL_BED_LEVELING 2016-02-20 20:35:10 -08:00
Scott Lahteine
9f8e6dce20 Merge pull request #2942 from esenapaj/esenapaj-patch-2 
more suitable display format for delta printer
 2016-02-18 17:59:35 -08:00
Scott Lahteine
e1beaf61eb Merge pull request #2985 from AnHardt/adv-ok 
Repair N in ADVANCED_OK
 2016-02-18 17:06:26 -08:00
esenapaj
34cde1b77c Merge pull request #14 from MarlinFirmware/RCBugFix 
Rc bug fix
 2016-02-19 09:19:23 +09:00
Scott Lahteine
f00ca3fd89 Fix layout descr. in configuration_store.cpp 2016-02-17 19:44:04 -08:00
Scott Lahteine
0c9db67273 Merge pull request #2983 from AnHardt/ok-echo 
Replace the "ok" in M280, M301, M304, M851 with output not including …
 2016-02-17 19:09:41 -08:00
Scott Lahteine
fbfbc5e330 Enable USE_WATCHDOG by default 2016-02-17 17:14:57 -08:00
Scott Lahteine
d4e7c2d694 Merge pull request #2976 from thinkyhead/drop_configurator 
Drop the experimental Configurator
 2016-02-17 17:08:08 -08:00
Scott Lahteine
9df0e0e0cc Merge pull request #2974 from thinkyhead/sanitycheck_spi_speed 
Sanity-check deprecated options replaced by SPI_SPEED
 2016-02-17 17:07:58 -08:00
Scott Lahteine
3e2473e695 Merge pull request #2988 from thinkyhead/z2_more_extruders 
Use next open E connector for Y2/Z2
 2016-02-17 17:07:07 -08:00
Scott Lahteine
8eaba020fb Merge pull request #2973 from thinkyhead/fix_splash_url 
Remove references to marlinfirmware.org
 2016-02-17 17:05:06 -08:00
Scott Lahteine
438a87eba8 Sanity check deprecated SDSLOW, SDEXTRASLOW 2016-02-17 14:54:10 -08:00
Scott Lahteine
b19b272172 Update configurations with SPI_SPEED 
- Include aligned comment about new SDSUPPORT behavior
 2016-02-17 14:54:09 -08:00
Scott Lahteine
7f30f85602 Merge pull request #2987 from thinkyhead/gcode_allow_no_initial_space 
Fix handling of spaces in GCode
 2016-02-17 14:51:19 -08:00
Scott Lahteine
b81d3b83cf Drop the experimental Configurator 
Development moved to https://github.com/thinkyhead/MarlinConfigurator
 2016-02-17 14:49:37 -08:00
Scott Lahteine
be691b51f1 Remove references to marlinfirmware.org 
The domain is gone and doesn’t redirect, so for now show no URL on the boot screen.
 2016-02-17 14:41:46 -08:00
Scott Lahteine
f3f58bd619 Merge pull request #2992 from thinkyhead/rc_rename_fpos_t 
Rename fpos_t to avoid libc conflict
 2016-02-17 14:40:33 -08:00
Scott Lahteine
83ffc9eb4f Show raw steps in M114 
This is a proposed change. This section of M114 output is a debug
extension according to RepRap wiki.
 2016-02-15 15:59:24 -08:00
Scott Lahteine
373e8a1ad4 Fixes for COREXY and COREXZ coordinates 2016-02-15 15:59:24 -08:00
unknown
31656e68bc Fix for homing X and Y before raising Z when Z_SAFE_HOMING is set. 2016-02-15 15:53:40 -06:00
unknown
8ea55323d8 Fix for not raising Z before homing X and Y 2016-02-15 14:52:04 -06:00
Scott Lahteine
b83e472bd3 Rename fpos_t to avoid libc conflict 2016-02-10 20:49:25 -08:00
Scott Lahteine
68457ee903 For Dual Y/Z use the next available extruder pins 2016-02-09 21:59:09 -08:00
Scott Lahteine
711e5db19a Tweak comment in process_next_command 2016-02-09 18:16:35 -08:00
Scott Lahteine
400e9329be Allow spaces after a code letter 2016-02-09 18:03:13 -08:00
Scott Lahteine
cdcb80f3c5 Allow no-space after initial command 
Addresses issue #2715
 2016-02-09 18:00:35 -08:00
AnHardt
6f473f7fc6 Repair N in ADVANCED_OK 
Send the correct line number.
If no N was in the command - non't send an N.
 2016-02-09 19:23:26 +01:00
AnHardt
efbd705eda Replace the "ok" in M280, M301, M304, M851 with output not including an "ok" 
Replace the "ok" in M280, M301, M304, M851 with output not including an "ok"
to avoid senting two "ok"s for a single g-code.

Doing the same for M105 would break the input filters of the hosts.
For M105 the other "ok" is omitted.
 2016-02-09 13:36:03 +01:00
Scott Lahteine
8e66028d25 Apply the ABL rotation matrix to the extruder offset. 2016-02-08 14:22:18 -08:00
esenapaj
ab5aa3fc92 Merge pull request #5 from MarlinFirmware/RCBugFix 
Rc bug fix
 2016-02-08 05:42:11 +09:00
esenapaj
27d918d836 Merge pull request #4 from MarlinFirmware/RCBugFix 
Rc bug fix
 2016-02-08 05:35:32 +09:00
Scott Lahteine
159ff94afd Remove obsolete HEATER_BED_DUTY_CYCLE_DIVIDER #2977 2016-02-07 08:02:11 -06:00
Ruwan J Egoda Gamage
1270fbfd38 Using SET_INPUT instead of pinMode 2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage
b58083b0fa Getting rid of SDEXTRASLOW, SDSLOW variables. 2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage
1833049b8a reusing millis() 2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage
1b7c443628 Adding SDULTRASLOW variable. 
Instead of changing SDEXTRASLOW variable to a slower speed,  the new
SDULTRASLOW is used for rigidbot panel.
 2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage
6f9e9c0e4f Cleaning up, getting rid of the fake encoder count variable. 2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage
becbfe1065 Fixing Rigidbot LCD Panel Support 2016-02-07 07:58:52 -06:00
esenapaj
4882a7eded more suitable display format for delta printer 2016-01-29 18:38:25 +09:00
esenapaj
d7272e3f36 Merge pull request #3 from MarlinFirmware/RCBugFix 
Rc bug fix
 2016-01-29 05:43:22 +09:00
Scott Lahteine
62bad1b60f Merge pull request #2848 from japzi/RCBugFix 
Fixing Rigidbot LCD Panel Support
 2016-01-26 17:30:12 -08:00
esenapaj
59d345a3dd Update Configuration.h 2016-01-22 07:27:11 -06:00
esenapaj
b8f0c8a4c7 Update Configuration.h 2016-01-22 07:27:11 -06:00
esenapaj
df0d599c79 Update Configuration.h 2016-01-22 07:27:11 -06:00
esenapaj
a366697649 Update Configuration.h 2016-01-22 07:27:11 -06:00
Richard Wackerbarth
7c94c83765 Repair formula mangled by PR#1319 in Jan 2015 2016-01-15 10:06:27 -06:00
Naruto-kyun
2932602643 Update stepper.cpp 
Forgot Z2_MIN_PIN
 2016-01-15 16:50:43 +01:00
Ruwan J Egoda Gamage
06555febdd Using SET_INPUT instead of pinMode 2015-12-24 12:12:25 -05:00
esenapaj
8d2aa2368d Update Configuration_adv.h 2015-12-23 08:16:36 +09:00
esenapaj
0de5fcad0a Update Configuration_adv.h 2015-12-23 08:16:06 +09:00
esenapaj
1403b9acc0 Update Configuration_adv.h 2015-12-23 08:15:20 +09:00
esenapaj
5cf1c38ea1 Update Configuration_adv.h 2015-12-23 08:12:54 +09:00
esenapaj
04ab61bf40 Update Configuration_adv.h 2015-12-23 08:12:28 +09:00
esenapaj
39c62fbd6f Update Configuration_adv.h 2015-12-23 08:12:04 +09:00
esenapaj
efcb769003 Update Configuration_adv.h 2015-12-23 08:09:57 +09:00
esenapaj
992fbb831d Update Configuration_adv.h 2015-12-23 08:08:45 +09:00
esenapaj
5ee6fe6385 Update Configuration_adv.h 2015-12-23 08:07:12 +09:00
esenapaj
056daf00fc Update Configuration_adv.h 2015-12-23 08:06:15 +09:00
esenapaj
71aafb79a0 Update Configuration_adv.h 2015-12-23 08:03:54 +09:00
Ruwan J Egoda Gamage
2c9e0415c7 Getting rid of SDEXTRASLOW, SDSLOW variables. 2015-12-13 23:23:01 -05:00
Ruwan J Egoda Gamage
a64bcd53e9 reusing millis() 2015-12-13 22:06:03 -05:00
Ruwan J Egoda Gamage
e6cc232184 Adding SDULTRASLOW variable. 
Instead of changing SDEXTRASLOW variable to a slower speed,  the new
SDULTRASLOW is used for rigidbot panel.
 2015-12-13 15:47:10 -05:00
Ruwan J Egoda Gamage
83c4131ba3 Cleaning up, getting rid of the fake encoder count variable. 2015-12-13 15:28:40 -05:00
Ruwan J Egoda Gamage
5eeea2f611 Fixing Rigidbot LCD Panel Support 2015-12-13 15:28:40 -05:00
Richard Wackerbarth
f6950acb8e Residual unused variable — Backport 2015-12-10 19:48:08 -06:00
Richard Wackerbarth
7a670e3911 Improve planner & stepper PR #263 2015-12-10 07:24:37 -06:00
Richard Wackerbarth
58658c9279 Call the probe pin a probe pin and not a min endstop 2015-12-10 07:20:52 -06:00
Richard Wackerbarth
0fa3bac8ee If unused, just don’t define it. 2015-12-10 07:20:52 -06:00
Richard Wackerbarth
3b2973da6a Prepare Ramps for user redefinition 2015-12-10 07:20:52 -06:00
Richard Wackerbarth
1635613c25 Backport cosmetic 2015-12-10 07:20:52 -06:00
Richard Wackerbarth
0b429461d5 Back port Cosmetic changes 2015-12-10 07:20:52 -06:00
Richard Wackerbarth
0cebe85e65 Clean up spacing and duplicate entries 
• Removing trailing whitespace
• Adjusting indention for better readability
• Removing duplicated entries
 2015-12-10 07:20:52 -06:00
Richard Wackerbarth
e7b40bbe98 Change link to U8glib source 2015-12-10 06:33:29 -06:00
Richard Wackerbarth
e2da2b4105 Back port language translation 2015-12-10 06:31:41 -06:00
Richard Wackerbarth
4f314afaf0 Allow Thermistor #12 to be used on hotends also 
//100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)

Caveat Emptor —- 
I’m not sure that this really makes sense,
but why keep someone from using it?
 2015-12-10 06:31:31 -06:00
Scott Lahteine
60d5658da8 Revert nozzle_bed_fan_menu_items 
For some reason that I cannot determine, using a sub-function causes
the Tune sub-menu to act strangely, yet replacing the function call
with its code content works perfectly.
 2015-12-09 20:33:52 -06:00
AnHardt
57da1b8497 Host parseble output for M109, M190 and M303 
Make the output of M105 more similar to Repetier.
Make the text-print pert of M105 an extra function to make it reusable. `print_heaterstates()`
Use `print_heaterstates()` in M019, M190 and M303
 2015-12-07 15:37:53 -06:00
AnHardt
fcceb98191 Unglobalize no_wait_for_cooling 2015-12-07 15:34:26 -06:00
Wurstnase
78a347a01a change nx, ny, nz and ne from float to long 
st_set_position takes long
```void st_set_position(const long& x, const long& y, const long& z, const long& e)```
 2015-12-07 08:22:44 -06:00
Wurstnase
6d691aceee change dx, dy, dz and de from float to long 
anything is long, we don't need float there
 2015-12-07 08:22:24 -06:00
Richard Wackerbarth
6bfcb74c25 The probe stowing coordinates have changed 2015-12-05 19:31:59 -06:00
Wurstnase
0fbfb22506 Renaming delta speeds (PR2824) 
dx -> dsx
dy -> dsy
dz -> dsz
de -> dse
 2015-12-04 07:55:45 -06:00
AnHardt
8d1eeff021 Fix status LEDs update when reinitializing the display 
Fix status LEDs update when reinitializing the display

By using the regular update function during init.

Fixing #2683
 2015-12-03 07:18:35 -06:00
Richard Wackerbarth
5a54204f72 Marlin 1.1.0 Release Candidate 3 - 01 December 2015 2015-12-01 07:24:45 -06:00
AnHardt
bb4efcf603 Handle temp callbacks when THERMAL_PROTECTION_HOTENDS is not defined 
by alternate definition for the callback macros
 2015-12-01 07:21:52 -06:00
AnHardt
96d0d04b8f Update LCD buttons less frequently 
Move slow_buttons_update into the LCD_UPDATE_INTERVAL block
lcd_implementation_read_slow_buttons() will then be executed ~10 times a
second.
 2015-11-30 05:44:32 -06:00
Richard Wackerbarth
e293ea57f0 Unbalanced brackets in setPwmFrequency 
This is a back port of the correct in issue #248
 2015-11-30 05:44:32 -06:00
AnHardt
c956b52c4a Babystep Multiplier 
Analog to https://github.com/MarlinFirmware/MarlinDev/pull/250 by
@RicardoGA

Restore the Babystep Multiplicator functionality and now it's available
for X/Y/Z
 2015-11-30 05:43:10 -06:00
Richard Wackerbarth
956418c674 Kc is also a multi-PID parameter 2015-11-23 06:08:01 -06:00
AnHardt
33addc52a1 Suppress Z_MIN_PROBE_REPEATABILITY_TEST for DELTA and SCARA configurations (PR#2747) 
For now Z_MIN_PROBE_REPEATABILITY_TEST is not possible for DELTA or SCARA
configurations.
This PR comments the feature out, where it is commented in by default.
 2015-11-13 07:33:33 -06:00
AnHardt
8da2e98985 Split RAMPS 1.3 an 1.4 (PR#2741) 
because of hardware differences on the SERVO0_PIN
 2015-11-13 07:13:48 -06:00
AnHardt
be7167ed97 Change XY formatting on LCD (PR#2740) 
According to #123 negative values for XY at or below -100 are displaying incorrectly, dropping the first digit. Deltas can easily have XY values in this range. This PR adds a function to display floats/ints formatted like `_123`, `-123`, `_-12`, or `__-1` as appropriate and applies it to the XY coordinates on Hitachi displays. It also moves the Z value to the right to be consistent with the XY formatting.
 2015-11-13 06:46:11 -06:00
Luis Correia
e7099ea597 Fix Portuguese (Portugal) strings (PR#2700) 
Align strings with release
 2015-11-12 00:08:42 -06:00
Scott Lahteine
754b13d8fe Patch issue #2315 2015-11-12 00:03:22 -06:00
Scott Lahteine
dbd4c17096 Init Kp, Ki, Kd to 0 2015-11-12 00:03:22 -06:00
Scott Lahteine
644c376e84 Use binary OR with endstop bits 2015-11-12 00:03:22 -06:00
Scott Lahteine
54a39d8c1a Use a ternary in qr_solve.cpp 2015-11-12 00:03:22 -06:00
Scott Lahteine
17c23bbaf3 Shorten gcode_M221 yet function the same 2015-11-12 00:03:22 -06:00
Scott Lahteine
c0e791dbe9 Only look for "N" line number as first parameter 2015-11-12 00:03:22 -06:00
Scott Lahteine
b4af4441c5 Clean up watchdog impl. 2015-11-12 00:03:22 -06:00
Scott Lahteine
8f16563bbd Use "defined" with LCD_PIN_BL and LCD_PIN_RESET 2015-11-12 00:03:22 -06:00
Scott Lahteine
6fa7e24af3 Use "UNUSED" to squash compiler warnings 2015-11-12 00:03:22 -06:00
Scott Lahteine
d5b7c595ae Use static locals in utf_mapper.h 2015-11-12 00:03:21 -06:00
Scott Lahteine
9bdab4f3a8 Clean up "else" and other spacing 2015-11-12 00:03:21 -06:00
Scott Lahteine
9b23490f01 Clean up spacing in configs 2015-11-12 00:03:21 -06:00
esenapaj
c6c37abd41 Update language_kana.h 2015-11-12 00:00:51 -06:00
esenapaj
c24045475a Update language_kana_utf8.h 2015-11-12 00:00:32 -06:00
Richard Wackerbarth
25d636c9e0 Compiler issues (PR#2696) 2015-11-11 23:52:11 -06:00
AnHardt
47401ec97b MSG_EXTRUDER_SWITCHED_OFF was renamed to MSG_REDUNDANCY 
in language.h, but was not renamed here. If TEMP_SENSOR_1 is enabled as redundant then
an error is thrown that MSG_EXTRUDER_SWITCHED_OFF is not defined.

Originaly by @12dstring
 2015-10-08 10:45:11 -05:00
Scott Lahteine
ba6a243197 DEBUG message has no parameter (PR#2671) 2015-10-03 22:03:03 -05:00
Scott Lahteine
0c7f7ebcfb Styling adjustments (PR#2668 & PR#2670) 
Keep "astyled" reformatting
 2015-10-03 22:02:45 -05:00
Rafa Couto
b5fb7075b9 Galician (gl) language. 2015-09-30 14:46:01 -05:00
Richard Wackerbarth
7b4bdc0203 DUAL_X_CARRIAGE motor enabling 
As noted by @darkjavi et.al. in #103, the E1 motor was not being enabled in planner.cpp when using DUAL_X_CARRIAGE. This patch enables and disables E1 as it should.
 2015-09-30 04:31:19 -05:00
Richard Wackerbarth
91b5156b3e Marlin 1.1.0 Release Candidate 2 - 29 September 2015 2015-09-29 20:28:41 -05:00
Richard Wackerbarth
03f0edb57e Fix high LCD status screen update frequency (PR#2655) 2015-09-28 11:07:33 -05:00
KiteLab
0ad25c6665 Hint for changed behaviour of SDSUPPORT 2015-09-28 11:07:33 -05:00
Richard Wackerbarth
e01f5e1ef7 Cleanup 2015-09-17 10:44:23 -05:00
Mike Cochrane
5e36b64635 SDEXTRASLOW for some SD card readers (PR#176) 
Add SDEXTRASLOW which runs the SD card at SPI_QUARTER_SPEED. Quarter speed is needed for RIGIDBOT_PANEL
 2015-09-14 07:58:08 -05:00
Scott Lahteine
5d65a36dee Give lcd_sd_status an UNKNOWN state (PR#180) 2015-09-14 06:32:27 -05:00
fmalpartida
0f149ea0c6 LCD home button causes repeated homing (PR#175) 
Fix: increased debounce delay.
 2015-09-14 06:31:49 -05:00
Scott Lahteine
b825567e0f Drop www. from marlinfirmware.org (PR#175) 2015-09-14 06:28:53 -05:00
Scott Lahteine
db27e67580 Apply PID_ADD_EXTRUSION_RATE to extras 2015-09-12 07:53:20 -05:00
Scott Lahteine
bc50db9cf6 Implement PID_ADD_EXTRUSION_RATE 2015-09-12 07:53:20 -05:00
Scott Lahteine
cffb2d457e Cleanup file formatting 2015-09-12 07:48:27 -05:00
Scott Lahteine
7ac7ddbf20 Show nozzles, heaters, and extruders numbered 1-4 2015-09-12 07:40:18 -05:00
Scott Lahteine
5bc480fee8 Fix Move E menu items 2015-09-12 07:33:49 -05:00
Scott Lahteine
fc882c34a3 Init lcd_sd_status as false to force lcd_update test 
Replaces #145 which is way out of date
 2015-09-12 07:32:20 -05:00
Scott Lahteine
e27dd5c22d Conditionalize functions that rely on SDSUPPORT 2015-09-12 07:30:09 -05:00
Scott Lahteine
fabf3ae4a0 Add final Z raise after Delta probe 2015-09-12 07:23:24 -05:00
Petr Zahradnik
8c768a76a2 Create language_cz.h 
Czech language translation.
 2015-09-12 07:18:05 -05:00