Scott Lahteine
20e5140e75
Merge pull request #4833 from thinkyhead/rc_no_scara_axis_scaling
...
Remove SCARA axis_scaling
2016-09-18 11:31:50 -05:00
Scott Lahteine
a501f430eb
Enable M0/M1 with Emergency Parser
2016-09-18 11:14:10 -05:00
Scott Lahteine
83a41c7ceb
Remove SCARA axis_scaling
2016-09-16 15:21:18 -05:00
Scott Lahteine
57564ae576
Use last probe point to correct Z when possible
2016-09-14 02:03:43 -05:00
Scott Lahteine
29f224594c
Fix some regressive typos in G29
2016-09-13 17:31:02 -05:00
Scott Lahteine
9b0931ef74
Apply fixed EXTRUDER_RUNOUT_PREVENT
2016-09-13 03:33:04 -05:00
Scott Lahteine
b1a60e8954
Reformat, rearrange, tweak, and document
...
- Add comments to several functions
- Add an option to use Fast SQRT for Delta IK
- Group related functions together
- Outdent some leveling-related functions
2016-09-13 03:33:04 -05:00
Scott Lahteine
61284cbd8c
Various code style adjustments
2016-09-13 03:33:04 -05:00
Scott Lahteine
788a16fc46
Clean up serial out code
2016-09-13 03:33:03 -05:00
Scott Lahteine
0e38bea79d
Shrink 3-point leveling code
2016-09-13 03:33:03 -05:00
Scott Lahteine
4f75ce6957
Unify reset_bed_level for linear/non-linear
2016-09-13 03:33:03 -05:00
Scott Lahteine
a9ed23225f
bed_level => bed_level_grid
2016-09-13 03:33:02 -05:00
Scott Lahteine
82be65065c
Fix up untilted_stepper_position and set_current_from_steppers_for_axis
2016-09-13 03:33:01 -05:00
Scott Lahteine
d65f5d816f
Patch to fix kinematics
2016-09-13 03:33:01 -05:00
Scott Lahteine
e529c6407e
Rename set_cartesian_from_steppers, cartesian_position
2016-09-13 03:33:01 -05:00
Scott Lahteine
d4f21af6b3
sync_plan_position_delta => sync_plan_position_kinematic
2016-09-13 03:33:01 -05:00
Scott Lahteine
acd1b6e9c0
Rename delta_grid spacing for general nonlinear
2016-09-13 03:33:00 -05:00
Scott Lahteine
c5fa70809b
Implement M0/M1 for EMERGENCY_PARSER
2016-09-13 03:33:00 -05:00
Scott Lahteine
786d1afb72
Add position_is_reachable, use in home_z_safely
2016-09-13 03:33:00 -05:00
Scott Lahteine
b4034915f8
Move z safe homing to its own function
2016-09-13 03:33:00 -05:00
Scott Lahteine
c84b14c77a
Move delta homing to its own function
2016-09-13 03:32:59 -05:00
Scott Lahteine
f9a192c7e3
Move setup() and loop() to the end
2016-09-13 03:32:59 -05:00
Scott Lahteine
74d7f5e57b
Patch SCARA example config
2016-09-13 03:32:59 -05:00
Scott Lahteine
6ab54c60b1
Add conditionals for kinematics, leveling
2016-09-13 03:32:59 -05:00
Scott Lahteine
9248cfb0ad
Bed leveling that accounts for home XYZ
2016-09-10 13:47:21 -05:00
Scott Lahteine
6ac9d895ca
Tweak Filament Width variables
2016-09-10 13:29:25 -05:00
Scott Lahteine
68ba45572e
Don't say "heating complete" unless done
2016-09-10 13:29:25 -05:00
Scott Lahteine
2bfc6fe1b0
Move XYZ constants closer to the top
2016-09-10 13:25:44 -05:00
Scott Lahteine
ad659b5f91
Merge pull request #4725 from thinkyhead/rc_log_machine_info
...
Log machine info in G28 and G29
2016-09-01 23:58:59 -05:00
Scott Lahteine
7e20448a2d
Add HOMING_Z_WITH_PROBE conditional
2016-08-30 13:29:26 -05:00
Scott Lahteine
0e4107da34
Minor cleanup of homeaxis, etc.
2016-08-30 13:29:26 -05:00
Scott Lahteine
fd2269f489
Log machine info in G28 and G29
2016-08-28 20:48:28 -05:00
Scott Lahteine
6eaf4f4909
Fix spacing of debug output in homeaxis
2016-08-28 19:43:33 -05:00
Scott Lahteine
0729a8f08d
Use the probe travel height for pre-probe move
...
Instead of using the home_bump for Z to move close to the bed before doing a slow probe, use the probe travel height.
2016-08-28 19:13:08 -05:00
Scott Lahteine
dd94d0b9d5
Fix bed probing bug without PROBE_DOUBLE_TOUCH
...
If `PROBE_DOUBLE_TOUCH` wasn't enabled, the probe move could be way too short! See #4701 for example.
2016-08-28 19:00:25 -05:00
Scott Lahteine
35a0c46f16
Tweak debug output for probe in G29
2016-08-28 18:44:44 -05:00
Scott Lahteine
2cb63f0bf7
Merge pull request #4719 from thinkyhead/rc_delta_homing_patch
...
Marlin patches for homing, esp. Delta
2016-08-27 20:46:50 -05:00
Scott Lahteine
73d86098b7
Marlin patches for homing, esp. Delta
2016-08-27 20:32:05 -05:00
Scott Lahteine
338bc768b1
Merge pull request #4717 from thinkyhead/rc_log_the_probe
...
Debug logging of nozzle type and offsets
2016-08-27 20:24:19 -05:00
Scott Lahteine
d641344d3a
Remove redundant probe offset in homing
2016-08-27 19:58:56 -05:00
Scott Lahteine
00638131e5
Debug logging of nozzle type and offsets
2016-08-27 15:21:01 -05:00
Scott Lahteine
991a34aff2
Log whether homing with probe or endstop
2016-08-26 15:50:10 -05:00
esenapaj
1749a7fae3
Suppress warning
2016-08-24 00:18:06 +09:00
Scott Lahteine
d07d85ac9f
Ensure probe points at the delta edge are kept
2016-08-23 05:09:56 -05:00
Scott Lahteine
27b80b1dd1
Merge pull request #4667 from thinkyhead/rc_M211_sw_endstop_switch
...
M211: Enable/Disable Software Endstops
2016-08-21 06:44:00 -05:00
Scott Lahteine
2f223b8c79
Use ABC and XYZ for "3"
2016-08-21 00:10:08 -05:00
Scott Lahteine
4cd1ad8f28
Adjustments to M209, G28, M605
2016-08-21 00:10:08 -05:00
Scott Lahteine
280534c06f
Add M211: Enable/Disable Software Endstops
2016-08-21 00:10:08 -05:00
Scott Lahteine
01d4703429
PREVENT_DANGEROUS_EXTRUDE => PREVENT_COLD_EXTRUSION
...
Also improve the documentation of this and related options, and set
EXTRUDE_MINTEMP to 170 everywhere.
2016-08-20 23:35:27 -05:00
MagoKimbra
28d1e5a946
Fix_Zig_Zag
2016-08-20 11:28:08 +02:00
Scott Lahteine
4d4c00d69c
Merge pull request #4651 from thinkyhead/rc_homing_vs_leveling_z
...
Improvements to homing / leveling
2016-08-19 15:45:49 -05:00
Scott Lahteine
12d72363cb
Do Delta radius check without sqrt
2016-08-19 05:05:48 -05:00
Scott Lahteine
044f800be9
Use SERIAL_PROTOCOLLNPGM in G28
2016-08-19 04:45:33 -05:00
Scott Lahteine
d309a9647d
Include probe offset for moving "close to the bed"
2016-08-19 04:45:33 -05:00
Scott Lahteine
35a08eeaeb
Use Z_HOME_DIR over axis_home_dir where we can
2016-08-19 04:45:32 -05:00
Scott Lahteine
55355a4fb8
Make probed points more symmetrical
2016-08-19 04:32:03 -05:00
Scott Lahteine
1f776f6034
Tweak some code comments
2016-08-19 04:32:02 -05:00
Scott Lahteine
748228cf40
Use named indices for delta_grid_spacing
2016-08-19 04:32:02 -05:00
Scott Lahteine
ead333e7da
line_to_axis_pos => do_homing_move
2016-08-19 04:32:02 -05:00
Scott Lahteine
7a4ccd7967
Add do_probe_move with Z fixes
2016-08-19 04:32:02 -05:00
Scott Lahteine
a1bad589c9
Augment debug/homing logging
2016-08-19 04:32:02 -05:00
Scott Lahteine
41b5c48129
Update software endstops if EEPROM is loaded
2016-08-19 04:32:01 -05:00
Scott Lahteine
628dcbc764
extruder_multiplier => flow_percentage
2016-08-18 22:13:47 -05:00
Scott Lahteine
d63b8e2b2b
Additional details for I2C_SLAVE_ADDRESS
2016-08-15 19:27:53 -07:00
Scott Lahteine
bd928a69ec
Add request, capture, flush to TWIBus
2016-08-15 00:04:20 -07:00
Scott Lahteine
97e0aed304
Further refinements of TWIBus
2016-08-13 18:32:41 -07:00
Scott Lahteine
67f119d18b
Add an i2c request handler
2016-08-11 18:09:18 -07:00
Scott Lahteine
d6a7ca6553
Merge pull request #4584 from thinkyhead/rc_delta_cal_more
...
Use configured feedrates, center in DELTA_CALIBRATION_MENU
2016-08-11 14:04:05 -07:00
Scott Lahteine
52560e257f
Merge pull request #4595 from thinkyhead/rc_i2c_slave
...
Add support for i2c slave address
2016-08-11 12:39:26 -07:00
Scott Lahteine
cd496dd9bd
do_blocking_move_to can't be 'inline', takes const ref args
2016-08-11 12:05:55 -07:00
Scott Lahteine
dd75fca4d9
Make M155 / M156 a bit more flexible
2016-08-11 00:52:01 -07:00
Scott Lahteine
a99ecf71d8
Add support for i2c slave address
2016-08-10 23:30:35 -07:00
Scott Lahteine
b63d70b186
Fix serial output for MBL, M303
2016-08-10 18:49:52 -07:00
Scott Lahteine
45f67164b6
Simplify the delay in kill()
2016-08-08 21:49:34 -07:00
Scott Lahteine
367dad5902
Sanity check Z_DUAL_ENDSTOPS with DELTA
2016-08-07 17:08:41 -07:00
Scott Lahteine
7b2abe6fc8
Use steps_to_mm in extruder runout prevent
2016-08-07 00:28:52 -07:00
Scott Lahteine
d320065320
Within Marlin, maintain most feed rates in mm/s
2016-08-07 00:28:52 -07:00
Scott Lahteine
a00783c41f
Format probe stowed test code
2016-08-06 14:31:07 -07:00
AnHardt
f37e8a31d7
Make Allen Key Probe stow
...
by switching off the tests for the probe before the stow move.
2016-08-06 14:30:38 -07:00
Scott Lahteine
938e6d15c4
Patch up some flaws, here and there
2016-08-05 08:17:37 -07:00
Scott Lahteine
7e2bd9a233
Z_RAISE_PROBE_* => Z_PROBE_*_HEIGHT
2016-08-03 21:18:38 -07:00
Scott Lahteine
445458c221
Don't include zprobe_zoffset
in do_probe_raise
2016-08-03 21:12:02 -07:00
Scott Lahteine
b73203a0b7
Move some includes around to uncover missing deps
2016-08-02 19:37:46 -07:00
Scott Lahteine
0f030aface
Merge pull request #4503 from AnHardt/fix-retract
...
Correct typo in retract()
2016-08-02 15:04:55 -07:00
Scott Lahteine
330f82971b
Buzzer requires BEEPER_PIN
2016-08-02 14:05:37 -07:00
AnHardt
39c4603598
Correct typo in retract.
2016-08-02 21:06:08 +02:00
Scott Lahteine
6eed37aafb
Merge pull request #4486 from thinkyhead/rc_pid_add_extrusion_rate_off
...
PID_EXTRUSION_SCALING, disabled by default
2016-07-31 18:23:51 -07:00
Scott Lahteine
4bf3526d00
Merge pull request #4463 from thinkyhead/rc_azteeg_x3_eeb
...
Wrangle RAMPS variants and derivatives
2016-07-31 18:22:49 -07:00
Scott Lahteine
63fd1f49a6
PID_EXTRUSION_SCALING, disabled by default
2016-07-31 17:49:34 -07:00
Scott Lahteine
f388beafa1
Merge pull request #4476 from otvald/RCBugFix
...
FIX for endstop adjustemt on delta is offset
2016-07-31 01:09:54 -07:00
Thomas Otvald Jensen
fe059f1221
During homing, line_to_axis_pos will make a path which moves across the
...
endstop trigger point. The move is stopped at endstop, so current_position
should also be adjusted to reflect this!
Caused error in subsequent call in endstop adjustment, since the movement
would assume a wrong starting position.
2016-07-30 16:50:31 +02:00
esenapaj
bd73e6d3c8
Fix for PR #4452 (Additional heater-state output changes)
...
・Add missing ';'
2016-07-30 22:49:30 +09:00
Scott Lahteine
bdac2eb13a
Don't set non-existent SLED_PIN
2016-07-30 04:17:21 -07:00
Scott Lahteine
8e2f095dde
Merge pull request #4456 from jbrazio/speaker-type3
...
Improvement to non-blocking speaker
2016-07-30 04:07:08 -07:00
Scott Lahteine
9e21b2e51d
Merge pull request #4455 from AnHardt/double-bump-feature
...
double bump probing as a feature
2016-07-29 20:00:10 -07:00
Scott Lahteine
db4d03bc81
Merge pull request #4452 from thinkyhead/rc_fix_heaterstates_part_2
...
Additional heater-state output changes
2016-07-29 19:58:00 -07:00
Scott Lahteine
844a4e799e
Account for DELTA in Planner::refresh_positioning
2016-07-29 18:41:11 -07:00
AnHardt
7188ce0ad6
double bump probing as a feature
...
Why double touch probing is not a good thing.
It's widely believed we can get better __probing__ results when using a double touch when probing.
Let's compare to double touch __homing__.
Or better let's begin with single touch __homing__.
We home to find out out position, so our position is unknown.
To find the endstop we have to move into the direction of the endstop.
The maximum way we have to move is a bit longer than the axis length.
When we arrive at the endstop - when it triggers, the stepper pulses are stopped immediately.
It's a sudden stop. No smooth deacceleration is possible.
Depending on the speed and the moving mass we lose steps here.
Only if we approached slow enough (below jerk speed?) we will not lose steps.
Moving a complete axis length, that slow, takes for ever.
To speed up homing, we now make the first approach faster, get a guess about our position,
back up a bit and make a second slower approach to get a exact result without losing steps.
What we do in double touch probing is the same. But the difference here is:
a. we already know where we are
b. if the first approach is to fast we will lose steps here to.
But this time there is no second approach to set the position to 0. We are measuring only.
The lost steps are permanent until we home the next time.
So if you experienced permanently rising values in M48 you now know why. (Too fast, suddenly stopped, first approach)
What can we do to improve probing?
We can use the information about our current position.
We can make a really fast, but deaccelerated, move to a place we know it is a bit before the trigger point.
And then move the rest of the way really slow.
2016-07-30 03:00:49 +02:00
Scott Lahteine
c31f56a38c
Deprecate EXTRUDER_WATTS and BED_WATTS
2016-07-29 17:34:14 -07:00
Scott Lahteine
e1970b4b28
Show power output in same order as temp output
2016-07-29 14:55:22 -07:00
Scott Lahteine
74df828acc
Show ADC values inline rather than after
2016-07-29 14:55:18 -07:00
João Brázio
2b5faa61e2
Consolidates Buzzer and Speaker into a single object
2016-07-29 19:25:39 +01:00
Scott Lahteine
b40661cb18
Fix output of heater states
2016-07-28 17:40:01 -07:00
Scott Lahteine
8953e3e984
Allow Z_SAFE_HOMING without a probe
2016-07-27 04:33:56 -07:00
Scott Lahteine
5272147f7c
Followup #4402 fixing 3-point leveling
2016-07-25 15:56:34 -07:00
Scott Lahteine
169c21b477
Merge pull request #4402 from thinkyhead/rc_consistent_positioning
...
Account for coordinate space offsets
2016-07-24 19:23:20 -07:00
Scott Lahteine
2595a40a61
Account for coordinate space more in G28 / G29 / M48
2016-07-24 18:34:05 -07:00
Scott Lahteine
b7b7c90477
Merge pull request #4389 from thinkyhead/rc_optimize_planner
...
Optimize planner with precalculation, etc.
2016-07-24 17:48:23 -07:00
Scott Lahteine
b183442c61
Fix inactive_extruder_x_pos for coordinate space
2016-07-24 17:20:36 -07:00
Scott Lahteine
f75b0c2ee1
Make POSITION macros global
2016-07-24 17:20:36 -07:00
Scott Lahteine
101b60ef42
Tweak Dual X Carriage data spacing
2016-07-24 17:20:35 -07:00
Scott Lahteine
d8f2876753
Replace some float division with multiplication
2016-07-24 13:27:50 -07:00
Scott Lahteine
f8b5749235
Replace division in planner with multiplication
2016-07-24 13:27:49 -07:00
Scott Lahteine
db5df9500b
Move sync_plan_position closer to the top
2016-07-24 13:27:49 -07:00
João Brázio
50fb0f7cec
M31 serial output is now always in EN
2016-07-24 15:52:03 +01:00
João Brázio
62d96d72f3
Renamed timestamp_t to duration_t
2016-07-24 03:16:02 +01:00
Scott Lahteine
bb93b6822a
Use set_current_from_steppers_for_axis
2016-07-23 15:25:54 -07:00
AnHardt
96a162beda
Use implications from #4370 in run_z_probe()
...
See also https://github.com/MarlinFirmware/Marlin/pull/4370#issuecomment-234713680
2016-07-23 13:09:28 -07:00
Scott Lahteine
4e67a85a5d
Macros to loop over axes
2016-07-23 13:09:28 -07:00
esenapaj
784be56e99
Follow-up the PR #4353 (General cleanup: enum)
...
・Update description of M111
2016-07-24 00:53:35 +09:00
Scott Lahteine
08459a003f
Undo the self-sabotage that is do_blocking_move_to_axis_pos
2016-07-23 00:59:11 -07:00
esenapaj
d32c4056ad
Fix for the PR #4379 (Additional logging of do_blocking_move_to)
...
・Remove unneeded PSTR()
2016-07-23 16:38:57 +09:00
Scott Lahteine
8099ee51a5
Merge pull request #4379 from thinkyhead/rc_blocking_move_logging
...
Additional logging of do_blocking_move_to
2016-07-23 00:10:55 -07:00
Scott Lahteine
ad16d5019e
Additional logging of do_blocking_move_to
2016-07-22 23:53:08 -07:00
Scott Lahteine
652fd8a826
Merge pull request #4362 from thinkyhead/rc_duplication_mode
...
DUAL_NOZZLE_DUPLICATION_MODE
2016-07-22 21:17:59 -07:00
Scott Lahteine
6da3729531
Merge pull request #4370 from thinkyhead/rc_delta_fwd_kinematics
...
Delta Forward Kinematics (and LOGICAL_POSITION)
2016-07-22 21:16:00 -07:00
Scott Lahteine
b3eb0c8569
Add LOGICAL_POSITION macro, apply to kinematics
2016-07-22 18:38:13 -07:00
Scott Lahteine
35a610abf9
const arg to inverse_kinematics
2016-07-22 17:42:48 -07:00
Scott Lahteine
b6afa028f4
Don't call adjust_delta on SCARA
2016-07-22 16:36:34 -07:00
Scott Lahteine
d5e2d523c7
Generalize kinematics function names
2016-07-22 16:36:34 -07:00
Scott Lahteine
9c4ad7d7ef
Clean up delta declarations in Marlin_main.cpp
2016-07-22 16:36:33 -07:00
Scott Lahteine
4b1725628b
Move kinematic functions to "private" scope
2016-07-22 16:36:33 -07:00
Scott Lahteine
cde068ea42
Use set_current_from_steppers in quickstop_stepper
2016-07-22 16:36:33 -07:00
Scott Lahteine
9f30cc84ce
Use set_current_from_steppers for other kinematics
2016-07-22 16:36:33 -07:00
AnHardt
5db9b940ee
Use forwardKinematics in DELTA run_z_probe()
2016-07-22 16:36:33 -07:00
Scott Lahteine
cbc7f22ad9
Implement DUAL_NOZZLE_DUPLICATION_MODE
2016-07-22 16:23:58 -07:00
Scott Lahteine
179e091473
Merge pull request #4374 from thinkyhead/rc_jbrazio_timestamp_t
...
Implements timestamp_t structure
2016-07-22 16:08:10 -07:00
AnHardt
499e404fbf
forwardKinematics for Delta printers
2016-07-22 16:01:51 -07:00
João Brázio
23043a1e05
Rework some code to use timestamp_t struct (saves 72 bytes)
2016-07-22 15:53:31 -07:00
Scott Lahteine
0b2c608d2f
Merge pull request #4372 from jbrazio/gcc-bark
...
Fix minor gcc warning
2016-07-22 15:18:53 -07:00
Scott Lahteine
311c7dadb6
Cleanup do_blocking_move_to for DELTA
2016-07-22 14:18:45 -07:00
Scott Lahteine
b78590e63d
Patch and cleanup run_z_probe
2016-07-22 14:18:45 -07:00
João Brázio
2f7716987d
Fix minor gcc warning
2016-07-22 16:08:56 +01:00
AnHardt
376a57232e
DELTA do_blocking_move_to() more like the Chartesian one
2016-07-22 03:12:46 +02:00
AnHardt
6ef26a85d8
Back to the differences method in run_z_probe()
2016-07-21 18:16:38 +02:00
Scott Lahteine
16e5348659
Merge pull request #4360 from thinkyhead/rc_toolchange_for_G28
...
Always switch to tool 0 for G28
2016-07-20 19:07:35 -07:00
Scott Lahteine
d2e9a9c188
Always switch to tool 0 for G28
2016-07-20 09:36:55 -07:00
Scott Lahteine
194d9521c3
Merge pull request #4356 from thinkyhead/rc_simpler_run_z_probe
...
Unify run_z_probe
2016-07-19 19:02:39 -07:00
AnHardt
09a3cc33e6
Unify run_z_probe
...
Unify run_z_probe
Add double touch for DELTAs.
Introduce Z_PROBE_SPEED_FAST and Z_PROBE_SPEED_SLOW
defaulting to homing_feedrate_mm_m[Z_AXIS] and homing_feedrate_mm_m[Z_AXIS]/2
2016-07-19 18:42:48 -07:00
Scott Lahteine
204fd6ec44
Set homing feedrates individually
2016-07-19 17:31:58 -07:00
João Brázio
47fef80848
Nozzle::clean() no longer requires HAS_BED_PROBE
2016-07-19 15:07:02 -07:00
Scott Lahteine
6c899bb520
Merge pull request #4349 from jbrazio/gcc-bark-bark
...
Removes some minor GCC warnings
2016-07-19 13:42:33 -07:00
Scott Lahteine
c502018eab
Merge pull request #4353 from jbrazio/global-enum-file
...
General cleanup: enum
2016-07-19 13:37:56 -07:00
AnHardt
11c075c6b2
Introduce line_to_axis_pos(axis_codes axis, float where, float feed_rate = 0.0)
...
and use it in `homeaxis()` instead of `do_blocking_move_to_axis_pos()`.
`do_blocking_move_to_axis_pos` was wrong because it performed subdivided, delta-corrected moves for x- and y-axis.
The first common move for delta homing is like quick_home but for 3 towers.
Fix two warnings.
2016-07-19 17:24:44 +02:00
João Brázio
3ebad4e020
Moves all global enums to a central file
2016-07-19 14:31:09 +01:00
João Brázio
30ac0782a9
Comment section style correction
2016-07-19 03:27:42 +01:00
João Brázio
79e7721b76
Removes some minor GCC warnings
2016-07-19 03:03:11 +01:00
Scott Lahteine
3422103863
Merge pull request #4310 from thinkyhead/rc_mbl_position_shift
...
Fix position shift with MBL
2016-07-17 18:31:25 -07:00
Scott Lahteine
493d30cd97
Drop intermediate nx, ny, and set destination directly
2016-07-17 17:59:52 -07:00
Scott Lahteine
07a735ad22
We always use destination
so modify mesh_buffer_line
2016-07-17 17:57:33 -07:00
Scott Lahteine
04a5b7b257
A macro to normalize positions
2016-07-17 17:57:32 -07:00
Scott Lahteine
86eb5251c5
Fix some debug messages
2016-07-17 17:10:02 -07:00
Scott Lahteine
1e57a6af73
Use blocking_move, current_position in G28 homing
2016-07-17 16:56:13 -07:00
Scott Lahteine
f6a3a1da09
nz and ne are always set, so drop them down
2016-07-17 14:12:39 -07:00
Scott Lahteine
d0009e013b
Rename cell index vars
2016-07-17 14:12:39 -07:00
Scott Lahteine
697373b071
Reduce code size of mesh_buffer_line
2016-07-17 14:11:25 -07:00
Scott Lahteine
f4a69281fc
Only call mesh_buffer_line when MBL is active
2016-07-17 14:11:25 -07:00
Scott Lahteine
799a31cd30
Include the position_shift when splitting mesh lines
2016-07-17 14:08:20 -07:00
Scott Lahteine
f242aea032
Merge pull request #4319 from thinkyhead/rc_feedrates_to_mess_with_you
...
Wrangle feed rate variables
2016-07-17 14:07:52 -07:00
Scott Lahteine
0342661b3f
Merge pull request #4335 from thinkyhead/rc_status_pad_jp
...
Debug char, fix compile errors for lcd pins
2016-07-17 14:07:08 -07:00
Scott Lahteine
5ed1e7a464
codenum => dwell_ms
2016-07-17 13:35:21 -07:00
Scott Lahteine
f38553b482
fix a debug message
2016-07-17 13:29:42 -07:00
Scott Lahteine
3d78b8f929
Use HYPOT macro instead of hypot function
2016-07-17 13:29:42 -07:00
Scott Lahteine
9f9fe043ba
Apply sq macro throughout
2016-07-17 13:29:41 -07:00
Scott Lahteine
93ba5bddd7
Append units to feedrate variables
2016-07-17 13:29:41 -07:00
Scott Lahteine
21ee0612e3
Debug char
2016-07-17 12:27:36 -07:00
Scott Lahteine
8f24e0a556
Debugging of MBL in G28
2016-07-17 11:08:30 -07:00
Scott Lahteine
05da02f0a2
Implement MIXING_EXTRUDER and SWITCHING_EXTRUDER
2016-07-17 10:53:10 -07:00
Scott Lahteine
02285662f5
Merge pull request #4298 from jbrazio/feature/filament-counter
...
Adds filamentUsed and longestPrint stats to PrintCounter
2016-07-16 23:48:46 -07:00
Scott Lahteine
bf16ae5a70
Merge pull request #4299 from jbrazio/feature/g27-park-nozzle
...
Implements park nozzle feature
2016-07-16 23:47:12 -07:00
João Brázio
a8758619ec
The safe_delay() is now globaly accessible
2016-07-16 12:28:06 +01:00
João Brázio
f5234b0695
Adds a customizable screen timeout for the default boot screen
2016-07-16 12:24:36 +01:00
João Brázio
2f26bc2153
Adds filamentUsed and longestPrint stats to PrintCounter
2016-07-16 12:12:27 +01:00
João Brázio
c711701626
Implements a nozzle parking command (G27)
2016-07-16 12:07:59 +01:00
João Brázio
5f368d1bc3
Followup for #4320
2016-07-16 11:57:35 +01:00
João Brázio
d7c51bc4b9
Merge pull request #4320 from jbrazio/followup/4307
...
Moves do_blocking_move_to_xy() out of the HAS_BED_PROBE define
2016-07-16 11:48:00 +01:00
Scott Lahteine
e563634a25
Merge pull request #4314 from AnHardt/use-d_b_m_t-in-g28
...
Use do_blicking_move_to*() in G28
2016-07-15 20:22:02 -07:00
Scott Lahteine
59ae1811c2
Merge pull request #4303 from AnHardt/delta-g28
...
DELTA: Move out of the clip-zone after G28
2016-07-15 20:20:22 -07:00
João Brázio
fdea8b6e6a
Moves do_blocking_move_to_xy() out of the HAS_BED_PROBE define
2016-07-16 03:59:49 +01:00
AnHardt
d2a49c016d
DELTA: Move out of the clip-zone after G28
...
Move down to a safe height after G28 for DELTAs.
2016-07-15 15:22:44 +02:00
AnHardt
46994fd17d
Use do_blicking_move_to*() in G28
2016-07-15 15:02:15 +02:00
João Brázio
ffbb31b235
Fixes an PSTR overflow with print_xyz()
2016-07-15 11:25:34 +01:00
Scott Lahteine
cec7110409
Merge pull request #4308 from thinkyhead/rc_debug_gcode_t
...
Added logging related to gcode_T
2016-07-14 19:46:33 -07:00
Scott Lahteine
166f19251e
Add more debugging for leveling
...
- Especially in `gcode_T`
- In `update_software_endstops`
- Some tweaks to observe
2016-07-14 19:04:13 -07:00
Scott Lahteine
7ac0b91a45
Collapsible long comment in gcode_T
2016-07-14 18:28:41 -07:00
João Brázio
e71a631f8f
do_blocking_move_*() no longer depend on HAS_BED_PROBE
2016-07-15 01:54:14 +01:00
Scott Lahteine
8bf6861af8
Merge pull request #4054 from jbrazio/feature/g12-clean-tool
...
Implements clean nozzle feature (Lulzbot's REWIPE)
2016-07-14 14:38:38 -07:00
Scott Lahteine
1618870c84
card.printingHasFinished does print_job_timer.stop
2016-07-14 11:39:58 -07:00
Scott Lahteine
34da77dad3
Simply run M31 at the end of an SD print
2016-07-14 11:39:58 -07:00
Scott Lahteine
a8d71f0ac6
Support longer print times in M31
2016-07-14 11:39:58 -07:00