Commit graph

9294 commits

Author SHA1 Message Date
Eduardo José Tagle d6955f25b2 Expand serial support in DUE/AVR hals exploiting the templated MarlinSerial classes (#11988) 2018-10-03 00:47:27 -05:00
Eduardo José Tagle f6f2246f59 Templatized serial classes (#11982) 2018-10-02 22:15:30 -05:00
Scott Lahteine ee53f7d813 Revert header reorg. 2018-10-02 22:09:41 -05:00
Scott Lahteine d619ba2685 Tweak STM32F4 config 2018-10-02 22:03:00 -05:00
LineF d777cef837 fixed minimum macro (#11986) 2018-10-02 21:35:34 -05:00
Scott Lahteine e3f7b69105
Add PROBING_STEPPERS_OFF (#11984)
Co-Authored-By: houseofbugs <houseofbugs@gmail.com>
2018-10-02 05:13:58 -05:00
Scott Lahteine 0e5bcdf695 Make DISABLE_INACTIVE_EXTRUDER a simple switch 2018-10-02 04:57:03 -05:00
Scott Lahteine 0dedb3e139
Reorganize some core headers (#11983) 2018-10-02 04:25:46 -05:00
Thomas Moore ab4549d2bc [2.0.x] Add simultaneous retraction for mixing extruder (#11941) 2018-10-01 23:32:02 -05:00
Scott Lahteine c75f5a376b Tweak some comments 2018-10-01 18:34:14 -05:00
Scott Lahteine f4c625d3a1 Ensure MIN/MAX overrides 2018-10-01 05:32:55 -05:00
Scott Lahteine 3019713402 Reorganize some enums 2018-10-01 05:32:55 -05:00
Scott Lahteine 606a4362b3 Reduce STM32F4 compile warnings 2018-10-01 04:41:17 -05:00
Scott Lahteine b3154b2120 Apply MOVE_Z_WHEN_IDLE to example configurations
Co-Authored-By: dot-bob <gibben@gmail.com>
2018-10-01 01:41:11 -05:00
dot-bob b0fd8f2d74 Add option to move Z on double-click when idle 2018-10-01 01:41:11 -05:00
Scott Lahteine 389376c40e Clean up softspi.h 2018-10-01 01:29:48 -05:00
Scott Lahteine e78bdd654d Clean up BABYSTEP options 2018-10-01 01:29:21 -05:00
InsanityAutomation 8ae113ff36 Show zprobe_zoffset when BABYSTEP_HOTEND_Z_OFFSET is disabled (#11973) 2018-10-01 00:30:10 -05:00
InsanityAutomation 2e98437392 Clean up main menu (#11972) 2018-10-01 00:15:06 -05:00
InsanityAutomation 6d862b2916 Home before level corners, if needed (#11976)
…and add a consistent homing screen for all LCD pre-homing.
2018-10-01 00:14:28 -05:00
Scott Lahteine 11ac75edcb
Use PGM_P for PSTR pointers (#11977) 2018-09-30 23:44:33 -05:00
InsanityAutomation 4d5566a6b7 Add filament runout sensor menu item (#11971) 2018-09-30 21:33:46 -05:00
Scott Lahteine 8489673cea Adjust some HAL formatting 2018-09-30 21:24:37 -05:00
Scott Lahteine fb8a07660a Followup to minmax patch
Co-Authored-By: Palatis <palatis@gmail.com>
2018-09-30 21:17:31 -05:00
Scott Lahteine 3c40933713 Remove trailing spaces, old comment 2018-09-30 20:47:06 -05:00
Hannes Brandstätter-Müller a3ec805c97 Anycubic Kossel Linear+: corrected DELTA_DIAGONAL_ROD (#11964) 2018-09-30 05:41:26 -05:00
AnoNymous b30ca652ae Replace MIN# / MAX# with variadic MIN / MAX (#11960) 2018-09-30 04:59:14 -05:00
Scott Lahteine e10f730478 Tweak vector_3::apply_rotation 2018-09-30 01:51:33 -05:00
Scott Lahteine e2ab78d876 Fix SERIAL_PORT_2 sanity check 2018-09-30 00:24:10 -05:00
AnoNymous a644d8cb93 Avoid copies in vector and matrix (#11959) 2018-09-29 23:04:40 -05:00
Scott Lahteine 693865a649 Fix some whitespace 2018-09-29 22:36:36 -05:00
Scott Lahteine 9903305dda
Merge pull request #9582 from tcm0116/2.0.x-sensorless_probing
[2.0.x] Add TMC2130 sensorless probing
2018-09-29 21:02:22 -05:00
Scott Lahteine 14df753086 Correction for block->mix_steps
Fix #11484
2018-09-29 19:13:17 -05:00
Alexander Amelkin 2ecfda80ac Improve support for JTAG/SWD pins reuse (#11963)
STM32 can reuse JTAG and SWD pins separately. Add `DISABLE_DEBUG` option to disable both interfaces and retain `DISABLE_JTAG` to disable JTAG only.
2018-09-29 19:00:49 -05:00
Scott Lahteine bb47009656 Apply sensorless changes to example configs 2018-09-29 18:54:14 -05:00
Thomas Moore 3286325044 Add TMC2130 sensorless probing 2018-09-29 18:54:14 -05:00
Scott Lahteine 7d5c336c56 Corrections for dylsexic TMC 2018-09-29 18:51:11 -05:00
Scott Lahteine d89d8fe852 Fix Busy State in temperature.cpp
Fix #11954
2018-09-29 17:03:35 -05:00
Giuliano Zaro 70e7a465d8 [2.0.x] Fix compile error (#11951)
Fix compile error intruduced with M109 modification
2018-09-29 13:48:23 -05:00
Hannes Brandstätter-Müller 935b120949 Anycubic Kossel: probe closer to the edge (#11950) 2018-09-29 02:26:16 -05:00
Scott Lahteine 1410e79e7f Ensure M109 handles autotemp 2018-09-29 02:12:06 -05:00
Scott Lahteine e4389f7d23
Standard methods to wait for heating (#11949) 2018-09-29 01:44:47 -05:00
Scott Lahteine bdc9889d3a Fix a sanity check 2018-09-29 00:24:25 -05:00
Scott Lahteine 321f9140d1 Followup to #11904 2018-09-28 20:04:40 -05:00
InsanityAutomation 23114aeb81 Fix garbled M119 output. Honor NUM_RUNOUT_SENSORS (#11948) 2018-09-28 19:00:11 -05:00
Scott Lahteine 1667ed9d1c Pause should use ECHOLNPGM 2018-09-28 18:15:38 -05:00
Victor Tseng 93839e2f73 Add option to enable/disable autoretract altogether (#11904) 2018-09-28 16:52:56 -05:00
Scott Lahteine ad21a4f07b Tweaks to HAL format and order 2018-09-28 15:59:50 -05:00
Scott Lahteine b682a1961a Tweak STM32F7 TMC2660 class 2018-09-27 21:13:15 -05:00
Scott Lahteine a0a3b23e35 Reduce Raptor bootscreen by 144 bytes 2018-09-27 18:24:40 -05:00
InsanityAutomation 95d793456b Add Formbot Raptor config, fix other Formbot configs (#11926) 2018-09-27 19:20:43 -04:00
Mitch Roote d016b572e3 [2.0.x] Add pin configuration for Fysetc F6 (#11932) 2018-09-27 19:20:19 -04:00
Alexander Amelkin 84926b1d5a HAL general support for DISABLE_JTAG option (#11211)
Some STM32-based boards may use multiplexed JTAG pins as IO. Up to now the `DISABLE_JTAG` option (defined in pins files) was only supported for AT90-based boards. This commit generalizes the code and adds support for boards based on STM32F1 and STM32F4.
2018-09-27 19:02:50 -04:00
Scott Lahteine c575c5d5f6
Bring example configs up to date (#11939) 2018-09-27 18:47:26 -04:00
Scott Lahteine 6b1a4f30a8 Fix case of T-Rex 3 _Statusscreen.h 2018-09-27 17:00:55 -05:00
Scott Lahteine ab7bfa86e2 Fix case of T-Rex-3 _Statusscreen.h 2018-09-27 17:00:55 -05:00
Scott Lahteine 241168926d Update some configs 2018-09-27 16:42:59 -05:00
Scott Lahteine cb6454118c Workaround for Pronterface M29 2018-09-27 16:27:02 -05:00
Victor Tseng eeab4141db [2.0.x] Anycubic Trigorilla 14 pins tweak (#11869) 2018-09-27 16:06:21 -04:00
InsanityAutomation cb9dc56630 Add GT2560 v3 support (#11914) 2018-09-27 15:13:15 -04:00
InsanityAutomation f2e630a05e Stow probe on probing failed (#11936)
Prevents probe from being left down should probing fail and print job continue
2018-09-27 13:26:14 -04:00
Hannes Brandstätter-Müller 0b602ae101 [2.0.x] Fix Anycubic Kossel with Probe V1, stuck LCD message after stow (#11929) 2018-09-27 13:23:53 -04:00
Giuliano Zaro dc11131656 [2.0.x] fix possible race condition (#11923)
Fix some commits done in #11900
2018-09-25 13:56:57 -04:00
Scott Lahteine d6b9327c11 Followup for Endstop Noise Threshold
Followup to #11912
2018-09-25 13:50:49 -04:00
Scott Lahteine aa6e8e9325 Tweak some config comments 2018-09-25 13:42:28 -04:00
Scott Lahteine 5490a664f5
Expose: Homing Validation and Endstop Noise Threshold (#11912) 2018-09-24 21:59:12 -04:00
Scott Lahteine cee34f7290
Followup for BABYSTEP_HOTEND_Z_OFFSET (#11916) 2018-09-24 21:46:56 -04:00
teemuatlut 884ad75cb8 Update config files 2018-09-24 17:26:18 -04:00
Giuliano Zaro 18e456d38d [2.0.x] fix home endstop bug (DON'T MERGE, needs discussion) (#11900) 2018-09-24 16:56:01 -04:00
Scott Lahteine 6742026568 Followup for 6 extruders 2018-09-24 14:36:50 -04:00
Scott Lahteine 04bdff4115 Add a blank line 2018-09-24 12:49:02 -04:00
Marcio Teixeira ccbd045f02 Fixed warning about comparing signed to unsigned (#11909) 2018-09-24 12:03:29 -04:00
InsanityAutomation 1104054d73 2.0 IDEX Independent z offset and other fixes (#11862)
* Add Formbot Raptor board

Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>

* Add a second Z probe Z offset

Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>

* Modify method to utilize live adjustment of hotend z offset

Should probably move config option to babystepping and rename as it may now apply to all multiextruder systems

* Move config item and catchup other code to current method
2018-09-24 09:40:48 -05:00
Scott Lahteine 217e0efd20
General option PAUSE_BEFORE_DEPLOY_STOW (#11905) 2018-09-24 00:43:43 -04:00
Scott Lahteine 849dea92a8 Move probe extras below probe types 2018-09-23 23:23:07 -04:00
Scott Lahteine a2b0260f0f Update Sublime files 2018-09-23 19:59:08 -04:00
Hannes Brandstätter-Müller a4cdffdd69 Support for manually deployed fixed probes (#11899) 2018-09-23 19:59:08 -04:00
Scott Lahteine ddcbf80f23 Followup for Z_TRIPLE_ENDSTOPS 2018-09-23 12:22:31 -04:00
Marcio Teixeira c411e7eb0d [2.0.x] Squelch compiler warnings seen with -Wall (#11889) 2018-09-23 12:00:34 -04:00
Roxy-3D 83105590a0 Better default values for Mesh Inset 2018-09-22 03:25:18 -04:00
Roxy-3D 4163c1a514 Fix end stop and Z-probe reporting logic 2018-09-22 03:25:18 -04:00
Scott Lahteine ea9eb2fc8f Fix servo angles in config-store 2018-09-21 15:41:36 -04:00
Roxy-3D d3d6be8210 Add MAX7219 reverse units option (#11860) 2018-09-19 18:54:51 -05:00
Scott Lahteine beab9733f8 Remove extra clauses in config-store 2018-09-19 17:06:51 -05:00
Scott Lahteine 5a74b12b45 Followup to #11769 2018-09-19 16:40:32 -05:00
InsanityAutomation f38570ac55 Add custom user menu title (#11769) 2018-09-19 15:04:34 -05:00
Scott Lahteine 17494099a9 Fix parking_extruder_tool_change
Fix #11872
2018-09-19 03:02:07 -05:00
Scott Alfter 140caf99b8 E0_CS_PIN moved from A13 to A15 on RAMPS-FD v2.2 (#11865) 2018-09-18 22:24:20 -05:00
Scott Lahteine 10590c2f80 Fix some fan conditionals 2018-09-18 21:23:33 -05:00
Scott Lahteine e4ee607fc8 Fix Dual X FRS in M600
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
2018-09-18 21:23:33 -05:00
Scott Lahteine bae8f82ba8
[2.0] Fix Mixing Extruder mixing factors (#11861) 2018-09-18 01:10:41 -05:00
Scott Lahteine c5e5cc5e9f Fix some trailing whitespace, macros 2018-09-17 17:30:04 -05:00
AnHardt 54bd124665 2.0.x: Fix normalize_mix() (#11856)
Mix factors needed to be updated consistent with the recent Stepper/Planner code refactor.
2018-09-17 16:37:38 -05:00
Roxy-3D 5fbfbde532
Fix example file to pull in correct pins file 2018-09-17 10:41:30 -05:00
Roxy-3D 378f354939
IDEX Scaled Duplication is still under development
Take it out of the menu until it is tested and working.
2018-09-17 10:26:44 -05:00
Scott Lahteine 65045ba54b tmc_util fix part 2
Followup to 115abf9
2018-09-17 05:36:17 -05:00
Scott Lahteine 09a2bee8aa
Support more filament runout sensors in M119 (#11851) 2018-09-17 03:27:13 -05:00
Scott Lahteine 115abf9c53 Fix syntax error in front of tmc_axes 2018-09-17 01:10:20 -05:00
Roxy-3D 0780913848 IDEX Improvements (#11848) 2018-09-17 01:06:22 -05:00
Scott Lahteine 39732838b4 Tweak indent of Chinese languages 2018-09-17 00:58:32 -05:00