SunRed/Marlin-Artillery-M600
Archived
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
6113 commits 1 branch 0 tags 119 MiB
Commit graph

4997 commits

Author SHA1 Message Date
Scott Lahteine
6f59560526 Merge pull request #4448 from jbrazio/speaker-followup 
A little cleanup at speaker.h
 2016-07-28 17:37:36 -07:00
Scott Lahteine
c94b6dd3e7 Revert to SanityCheck on every .cpp file 2016-07-28 17:17:50 -07:00
Scott Lahteine
256b03598d Merge pull request #4450 from thinkyhead/rc_fix_delta_optimization 
Fix DELTA speed calculation
 2016-07-28 16:50:04 -07:00
Scott Lahteine
753283e020 inverse_second => inverse_mm_s 2016-07-28 16:35:18 -07:00
Scott Lahteine
83e1d90ca3 Undo errant optimization of block->millimeters 2016-07-28 16:26:52 -07:00
João Brázio
909e98b1af A little cleanup at speaker.h 2016-07-29 00:03:25 +01:00
Scott Lahteine
ae1c7bca1b Merge pull request #4445 from thinkyhead/rc_fix_rdfgsc_mega3 
Fix for R.D.F.G.S.C. with MEGATRONICS 3 board
 2016-07-28 15:55:30 -07:00
Scott Lahteine
03fdb26cd2 Wrangle encoder bits, LCD_CLICKED 2016-07-28 14:44:37 -07:00
Scott Lahteine
155def24c6 BLEN_A, B, C are defined in ultralcd headers 2016-07-28 14:38:50 -07:00
Scott Lahteine
42dcc3bf50 Remove "the click" comments 2016-07-28 14:38:50 -07:00
Scott Lahteine
0eba65f96b Fix for R.D.F.G.S.C. with MINITRONICS board 2016-07-28 14:38:50 -07:00
fabtopia
83d0d59303 Fix for R.D.F.G.S.C. with MEGATRONICS 3 board 
The support for reprapworld LCD boke the code for the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER. See Full Grapics Display does not work any more after #4408  #4439
 2016-07-28 13:12:19 -07:00
João Brázio
4f191a384b
Moves the font folder into the buildroot 2016-07-28 19:56:41 +01:00
Scott Lahteine
5367d56f87 Merge pull request #4434 from thinkyhead/rc_delta_safe_homing 
DELTA should ignore Z_SAFE_HOMING
 2016-07-27 23:41:52 -07:00
Scott Lahteine
2525528fb2 DELTA should ignore Z_SAFE_HOMING 2016-07-27 23:25:56 -07:00
Scott Lahteine
ab4b2a66ff Allow zero Z_RAISE_BETWEEN_PROBINGS 2016-07-27 05:00:58 -07:00
Scott Lahteine
8953e3e984 Allow Z_SAFE_HOMING without a probe 2016-07-27 04:33:56 -07:00
AnHardt
e4942d2163 Switch SD2cadrLib to fastio 
Replace all fastDigitalRead/Write() with READ/WRITE()

Define SCK_PIN, MISO_PIN, MOSI_PIN in pins.h if not already defined in the pins_*.h files.

Remove these conditional pin definitions from the pin-files. They are now always defined.

Define separate sets of SPI-pins for AT90USB with and without Teensy support in fastio.h.
Likely this was the main reason for all that confusion about the AT90USB-SPI pins.
 2016-07-27 12:40:44 +02:00
Scott Lahteine
21e744c454 Allow zero raise for deploy/stow 2016-07-26 17:19:25 -07:00
Scott Lahteine
54084612fd Merge pull request #4415 from petrzjunior/transl 
[LANGUAGE] Update Czech (Info screen strings)
 2016-07-26 13:20:20 -07:00
Scott Lahteine
5597400cda Merge pull request #4414 from thinkyhead/rc_split_conditionals 
Split up Conditionals.h into two files
 2016-07-26 13:16:52 -07:00
Scott Lahteine
4be635ec6e Remove MSG_PRINT_TIME from languages 2016-07-26 12:47:45 -07:00
Scott Lahteine
3be49881c0 Make SanityCheck.h a catch-all for obsolete configs 2016-07-26 12:41:40 -07:00
Scott Lahteine
fa647cca23 Do the sanity check just once per build 2016-07-26 12:37:14 -07:00
Scott Lahteine
24a1a16e5d Move versioning to MarlinConfig.h 2016-07-26 12:37:14 -07:00
Scott Lahteine
7e70a0b05d Move pins / Arduino includes to MarlinConfig.h 2016-07-26 12:37:14 -07:00
Scott Lahteine
d9f7ed9a3c Move some macros from Marlin.h to macros.h 2016-07-26 12:37:13 -07:00
Scott Lahteine
277899c175 Move include _Bootscreen.h where needed 2016-07-26 12:37:13 -07:00
Scott Lahteine
83c4653c71 Include boards and macros ahead of configs 2016-07-26 12:19:50 -07:00
Scott Lahteine
5f4702ecb2 Make Conditionals.h a catch-all for old configs 2016-07-26 12:19:50 -07:00
Scott Lahteine
8a44928df3 Make Conditionals.h a catch-all for old configs 2016-07-26 12:19:50 -07:00
Petr Zahradník junior
3d9b878cf0 Czech update 2016-07-26 13:48:27 +02:00
Scott Lahteine
c6226bb0aa Unify config in a single include without nested includes 2016-07-25 23:04:19 -07:00
Scott Lahteine
2d378fac1b No need to include thermistortables.h in Configuration.h 2016-07-25 22:43:50 -07:00
Scott Lahteine
df27d01cd9 Arrange needed includes in Marlin.h 2016-07-25 20:53:36 -07:00
Scott Lahteine
93ea281061 Split up Conditionals.h into two files 
Rather than include twice, which is tricky but may confuse
 2016-07-25 20:30:45 -07:00
Scott Lahteine
8684570f68 Merge pull request #4412 from thinkyhead/rc_followup_4402 
Followup #4402 fixing 3-point leveling
 2016-07-25 16:10:50 -07:00
Scott Lahteine
c55b7d0750 Merge pull request #4405 from thinkyhead/rc_theres_always_something 
Move HAS_DIGIPOTSS to Conditionals.h
 2016-07-25 15:58:42 -07:00
Scott Lahteine
42eebcd518 Merge pull request #4409 from thinkyhead/rc_cleanup_comment 
Clean up Transfer Buffer Size comment
 2016-07-25 15:58:34 -07:00
Scott Lahteine
5272147f7c Followup #4402 fixing 3-point leveling 2016-07-25 15:56:34 -07:00
Scott Lahteine
fcc39e2b5f Clean up Transfer Buffer Size comment 2016-07-25 12:54:55 -07:00
Scott Lahteine
0c0a63322b Patches to prepare REPRAPWORLD_GRAPHICAL_LCD 2016-07-25 12:10:25 -07:00
brupje
a60a668f6b Support for REPRAPWORLD_GRAPHICAL_LCD 2016-07-25 12:10:25 -07:00
Scott Lahteine
4f2ff46ab9 Move HAS_DIGIPOTSS to conditionals 2016-07-25 00:10:46 -07:00
Scott Lahteine
54f4f80077 Merge pull request #4404 from thinkyhead/rc_better_stepper_indirection 
Arrange stepper_indirection by axis
 2016-07-24 19:26:39 -07:00
Scott Lahteine
169c21b477 Merge pull request #4402 from thinkyhead/rc_consistent_positioning 
Account for coordinate space offsets
 2016-07-24 19:23:20 -07:00
Scott Lahteine
750a1e5116 Arrange stepper_indirection by axis 2016-07-24 19:00:51 -07:00
Scott Lahteine
7c27f34996 Merge pull request #4397 from thinkyhead/rc_tweak_eeprom 
Neaten up EEPROM read/write functions
 2016-07-24 18:45:54 -07:00
Scott Lahteine
2595a40a61 Account for coordinate space more in G28 / G29 / M48 2016-07-24 18:34:05 -07:00
Scott Lahteine
060dc6d95a Neaten up EEPROM read/write functions 2016-07-24 18:19:39 -07:00
Scott Lahteine
b7b7c90477 Merge pull request #4389 from thinkyhead/rc_optimize_planner 
Optimize planner with precalculation, etc.
 2016-07-24 17:48:23 -07:00
Scott Lahteine
6900bb2286 Merge pull request #4395 from tnw513/italian_fix 
Update Italian translations. Remove trailing spaces.
 2016-07-24 17:47:48 -07:00
Scott Lahteine
e4816293a8 serial_echopair_P for uint16_t 2016-07-24 17:46:37 -07:00
Scott Lahteine
d8e5af6834 Use RAW_POSITION for MBL in planner.set_position_mm 2016-07-24 17:20:36 -07:00
Scott Lahteine
b183442c61 Fix inactive_extruder_x_pos for coordinate space 2016-07-24 17:20:36 -07:00
Scott Lahteine
f75b0c2ee1 Make POSITION macros global 2016-07-24 17:20:36 -07:00
Scott Lahteine
101b60ef42 Tweak Dual X Carriage data spacing 2016-07-24 17:20:35 -07:00
Scott Lahteine
1fe60b723f Merge pull request #4400 from thinkyhead/rc_sanity_check_temp_sensor 
Sanity check for too many temp sensors
 2016-07-24 15:38:41 -07:00
Scott Lahteine
bedda3be61 Patch generic delta error caught by sanity check 2016-07-24 15:24:40 -07:00
Scott Lahteine
a5212bf277 Sanity check for too many temp sensors 2016-07-24 13:47:27 -07:00
Scott Lahteine
d8f2876753 Replace some float division with multiplication 2016-07-24 13:27:50 -07:00
Scott Lahteine
ddde785b37 Code formatting in planner.cpp 2016-07-24 13:27:50 -07:00
Scott Lahteine
f8b5749235 Replace division in planner with multiplication 2016-07-24 13:27:49 -07:00
Scott Lahteine
b921f6b69d Optimize calculation of block->millimeters for DELTA 2016-07-24 13:27:49 -07:00
Scott Lahteine
db5df9500b Move sync_plan_position closer to the top 2016-07-24 13:27:49 -07:00
Scott Lahteine
2839c56f5a Merge pull request #4390 from jbrazio/duration_t 
Renamed timestamp_t to duration_t
 2016-07-24 13:24:05 -07:00
Scott Lahteine
d6c50671d3 Sanitycheck: Z_SAFE_HOMING points are reachable 2016-07-24 10:54:47 -07:00
Scott Lahteine
a6203366b6 Sanitycheck: Z_SAFE_HOMING requires a probe 2016-07-24 10:54:25 -07:00
Scott Lahteine
bbe5b80492 Always define probe limits if there is a probe 2016-07-24 10:53:58 -07:00
Silvio Didonna
950397f2a0 Added missing translations. Removed trailing spaces for consistency (#4376) 2016-07-24 17:22:30 +02:00
João Brázio
50fb0f7cec M31 serial output is now always in EN 2016-07-24 15:52:03 +01:00
João Brázio
62d96d72f3 Renamed timestamp_t to duration_t 2016-07-24 03:16:02 +01:00
Scott Lahteine
3e2b3353b0 Fix axis indices for COREYZ 2016-07-23 19:02:14 -07:00
Scott Lahteine
c287846f46 Merge pull request #4387 from thinkyhead/rc_anhardt_more_4370 
Update Z in a unified way in run_z_probe
 2016-07-23 16:47:10 -07:00
Scott Lahteine
22d0654fe6 Merge pull request #4382 from esenapaj/Update-Japanese-translation 
Update Japanese translation
 2016-07-23 16:31:38 -07:00
Scott Lahteine
bb93b6822a Use set_current_from_steppers_for_axis 2016-07-23 15:25:54 -07:00
AnHardt
96a162beda Use implications from #4370 in run_z_probe() 
See also https://github.com/MarlinFirmware/Marlin/pull/4370#issuecomment-234713680
 2016-07-23 13:09:28 -07:00
Scott Lahteine
4e67a85a5d Macros to loop over axes 2016-07-23 13:09:28 -07:00
esenapaj
784be56e99 Follow-up the PR #4353 (General cleanup: enum) 
・Update description of M111
 2016-07-24 00:53:35 +09:00
esenapaj
3c11977558 Update Japanese translation 
・Add translation
・Change translation
・Remove translation
 2016-07-23 22:07:20 +09:00
Scott Lahteine
08459a003f Undo the self-sabotage that is do_blocking_move_to_axis_pos 2016-07-23 00:59:11 -07:00
esenapaj
d32c4056ad Fix for the PR #4379 (Additional logging of do_blocking_move_to) 
・Remove unneeded PSTR()
 2016-07-23 16:38:57 +09:00
Scott Lahteine
8099ee51a5 Merge pull request #4379 from thinkyhead/rc_blocking_move_logging 
Additional logging of do_blocking_move_to
 2016-07-23 00:10:55 -07:00
Scott Lahteine
8633b644cf Merge pull request #4378 from thinkyhead/rc_debug_leveling_docs 
Document DEBUG_LEVELING_FEATURE
 2016-07-22 23:57:01 -07:00
Scott Lahteine
ad16d5019e Additional logging of do_blocking_move_to 2016-07-22 23:53:08 -07:00
Scott Lahteine
bb9da6ebdd Document DEBUG_LEVELING_FEATURE 2016-07-22 23:37:41 -07:00
Scott Lahteine
652fd8a826 Merge pull request #4362 from thinkyhead/rc_duplication_mode 
DUAL_NOZZLE_DUPLICATION_MODE
 2016-07-22 21:17:59 -07:00
Scott Lahteine
1766b990b8 Merge pull request #4376 from jbrazio/timestamp_t-short 
Adds short format to timestamp_t
 2016-07-22 21:17:17 -07:00
Scott Lahteine
6da3729531 Merge pull request #4370 from thinkyhead/rc_delta_fwd_kinematics 
Delta Forward Kinematics (and LOGICAL_POSITION)
 2016-07-22 21:16:00 -07:00
João Brázio
9e5dbf67e8 Update the stats menu to include longest job and extruded filament 2016-07-23 03:05:45 +01:00
João Brázio
86d9311495 Rework LCD implementation to use timestamp_t 2016-07-23 03:05:36 +01:00
Scott Lahteine
b3eb0c8569 Add LOGICAL_POSITION macro, apply to kinematics 2016-07-22 18:38:13 -07:00
Scott Lahteine
35a610abf9 const arg to inverse_kinematics 2016-07-22 17:42:48 -07:00
João Brázio
b4aad85c9a Rework stats menu to use timestamp_t 2016-07-23 01:42:21 +01:00
João Brázio
ecd48027fa Adds short timestamp format to timestamp_t 2016-07-23 01:41:25 +01:00
Scott Lahteine
b6afa028f4 Don't call adjust_delta on SCARA 2016-07-22 16:36:34 -07:00
Scott Lahteine
d5e2d523c7 Generalize kinematics function names 2016-07-22 16:36:34 -07:00
Scott Lahteine
9c4ad7d7ef Clean up delta declarations in Marlin_main.cpp 2016-07-22 16:36:33 -07:00
Scott Lahteine
4b1725628b Move kinematic functions to "private" scope 2016-07-22 16:36:33 -07:00
Scott Lahteine
cde068ea42 Use set_current_from_steppers in quickstop_stepper 2016-07-22 16:36:33 -07:00
Scott Lahteine
9f30cc84ce Use set_current_from_steppers for other kinematics 2016-07-22 16:36:33 -07:00
AnHardt
5db9b940ee Use forwardKinematics in DELTA run_z_probe() 2016-07-22 16:36:33 -07:00
Scott Lahteine
b5a9647fec Use ENABLED in stepper_indirection.h 2016-07-22 16:26:06 -07:00
Scott Lahteine
cbc7f22ad9 Implement DUAL_NOZZLE_DUPLICATION_MODE 2016-07-22 16:23:58 -07:00
Scott Lahteine
91777dd76c Add DUAL_NOZZLE_DUPLICATION_MODE option 2016-07-22 16:22:56 -07:00
Scott Lahteine
260bbb3109 Fix a couple of simple typos 2016-07-22 16:22:56 -07:00
Scott Lahteine
179e091473 Merge pull request #4374 from thinkyhead/rc_jbrazio_timestamp_t 
Implements timestamp_t structure
 2016-07-22 16:08:10 -07:00
AnHardt
499e404fbf forwardKinematics for Delta printers 2016-07-22 16:01:51 -07:00
João Brázio
23043a1e05 Rework some code to use timestamp_t struct (saves 72 bytes) 2016-07-22 15:53:31 -07:00
João Brázio
9388dcfa49 Implements timestamp_t structure 2016-07-22 15:53:31 -07:00
Scott Lahteine
0b2c608d2f Merge pull request #4372 from jbrazio/gcc-bark 
Fix minor gcc warning
 2016-07-22 15:18:53 -07:00
Scott Lahteine
311c7dadb6 Cleanup do_blocking_move_to for DELTA 2016-07-22 14:18:45 -07:00
Scott Lahteine
b78590e63d Patch and cleanup run_z_probe 2016-07-22 14:18:45 -07:00
João Brázio
2f7716987d Fix minor gcc warning 2016-07-22 16:08:56 +01:00
João Brázio
efd3aabda8 Adds missing documentation to the point_t structure 2016-07-22 15:19:20 +01:00
Scott Lahteine
39caef4279 Merge pull request #4361 from AnHardt/imp-dbmt-for-delta 
DELTA do_blocking_move_to() more like the Chartesian one
 2016-07-21 20:05:04 -07:00
Scott Lahteine
7d869ad98b Merge pull request #4365 from thinkyhead/rc_shrink_planner_accel 
Adjustments to planner acceleration limit
 2016-07-21 18:18:15 -07:00
AnHardt
376a57232e DELTA do_blocking_move_to() more like the Chartesian one 2016-07-22 03:12:46 +02:00
Scott Lahteine
824c6859e2 Merge pull request #4369 from thinkyhead/rc_no_static_moves 
inline to fix warnings, smaller build size (sometimes)
 2016-07-21 14:46:09 -07:00
Scott Lahteine
976c31235d inline to fix warnings, smaller build size (sometimes) 2016-07-21 13:49:37 -07:00
AnHardt
6ef26a85d8 Back to the differences method in run_z_probe() 2016-07-21 18:16:38 +02:00
Scott Lahteine
4226f56f53 Revert the planner acceleration logic somewhat 2016-07-20 19:19:47 -07:00
Scott Lahteine
16e5348659 Merge pull request #4360 from thinkyhead/rc_toolchange_for_G28 
Always switch to tool 0 for G28
 2016-07-20 19:07:35 -07:00
Scott Lahteine
209f5c03d0 Fewer temporary vars in planner accel limit 2016-07-20 18:29:29 -07:00
Scott Lahteine
62ecd107ba Patch ultralcd_impl header conditional names 2016-07-20 09:36:55 -07:00
Scott Lahteine
d2e9a9c188 Always switch to tool 0 for G28 2016-07-20 09:36:55 -07:00
Scott Lahteine
194d9521c3 Merge pull request #4356 from thinkyhead/rc_simpler_run_z_probe 
Unify run_z_probe
 2016-07-19 19:02:39 -07:00
Scott Lahteine
4a6ed5e221 Use HOMING_FEEDRATE_Z for Z_PROBE_SPEED_FAST 2016-07-19 18:42:48 -07:00
AnHardt
09a3cc33e6 Unify run_z_probe 
Unify run_z_probe
Add double touch for DELTAs.
Introduce Z_PROBE_SPEED_FAST and Z_PROBE_SPEED_SLOW
  defaulting to homing_feedrate_mm_m[Z_AXIS] and homing_feedrate_mm_m[Z_AXIS]/2
 2016-07-19 18:42:48 -07:00
Scott Lahteine
6137a1d934 Merge pull request #4359 from thinkyhead/rc_wrangle_movement_etc 
Use ENABLED(MAPPER_NON)
 2016-07-19 18:22:55 -07:00
Scott Lahteine
0432613ad7 use enabled macro for mapper setting 2016-07-19 18:08:56 -07:00
Scott Lahteine
e44b37cdc2 motion section marker below homing speeds 2016-07-19 17:31:58 -07:00
Scott Lahteine
204fd6ec44 Set homing feedrates individually 2016-07-19 17:31:58 -07:00
Scott Lahteine
2bad02e60d Reprapworld Keypad: F1 opens the Move Axis menu 2016-07-19 16:40:39 -07:00
Scott Lahteine
eaa6f568ee Prevent re-entrant call of Reprapworld Keypad handler 2016-07-19 16:40:39 -07:00
Scott Lahteine
6abf916575 Reprapworld Keypad move step is 1mm 2016-07-19 16:40:39 -07:00
Scott Lahteine
06ac1f3bcf Reduce Reprapworld Keypad move code size 2016-07-19 16:40:39 -07:00
Scott Lahteine
5d5affdfca Merge pull request #4355 from thinkyhead/rc_rename_ultralcd_files 
Rename ultralcd implementation files for consistency
 2016-07-19 16:14:27 -07:00
Scott Lahteine
bb225dedc6 Merge pull request #4354 from thinkyhead/rc_jbrazio_rework_g12 
NOZZLE_CLEAN_FEATURE with no dependency on HAS_BED_PROBE
 2016-07-19 15:26:59 -07:00
Scott Lahteine
8a2efd1155 Rename ultralcd implementation files for consistency 2016-07-19 15:26:14 -07:00
João Brázio
b869fbc05e Update all config files with the new G12 options 2016-07-19 15:07:03 -07:00
João Brázio
47fef80848 Nozzle::clean() no longer requires HAS_BED_PROBE 2016-07-19 15:07:02 -07:00
Scott Lahteine
f1f1bac0e1 Merge pull request #4341 from esenapaj/Update-Japanese-translation 
Update Japanese translation
 2016-07-19 15:04:22 -07:00
Scott Lahteine
6c899bb520 Merge pull request #4349 from jbrazio/gcc-bark-bark 
Removes some minor GCC warnings
 2016-07-19 13:42:33 -07:00
Scott Lahteine
ef0a22871e Merge pull request #4350 from jbrazio/followup-a875861 
Adds utility.h
 2016-07-19 13:40:52 -07:00
Scott Lahteine
9eba58a031 Merge pull request #4351 from jbrazio/u8glib-converter 
Updates u8glib's bmp2hex converter
 2016-07-19 13:39:33 -07:00
Scott Lahteine
c502018eab Merge pull request #4353 from jbrazio/global-enum-file 
General cleanup: enum
 2016-07-19 13:37:56 -07:00
Scott Lahteine
0f9953b031 Merge pull request #4342 from AnHardt/rep-cons-g28 
Introduce line_to_axis_pos() for use in homeaxis()
 2016-07-19 12:56:58 -07:00
AnHardt
11c075c6b2 Introduce line_to_axis_pos(axis_codes axis, float where, float feed_rate = 0.0) 
and use it in `homeaxis()` instead of `do_blocking_move_to_axis_pos()`.
`do_blocking_move_to_axis_pos` was wrong because it performed subdivided, delta-corrected moves for x- and y-axis.

The first common move for delta homing is like quick_home but for 3 towers.

Fix two warnings.
 2016-07-19 17:24:44 +02:00
João Brázio
3ebad4e020 Moves all global enums to a central file 2016-07-19 14:31:09 +01:00
João Brázio
238fefcb00 Updates Stopwatch class to use internal state enum 2016-07-19 14:30:44 +01:00
João Brázio
30ac0782a9 Comment section style correction 2016-07-19 03:27:42 +01:00
João Brázio
8ecee431c4 Updates u8glib's bmp2hex converter 2016-07-19 03:16:30 +01:00
João Brázio
79e7721b76 Removes some minor GCC warnings 2016-07-19 03:03:11 +01:00
João Brázio
f4d63796b2 Adds utility.h 2016-07-19 02:55:23 +01:00
esenapaj
361307831e Follow-up the PR #4335 (Debug char, fix compile errors for lcd pins) 
・Solve a flickering when SD card is inserted or removed at using a ASCII
LCD + language_kana.h
 2016-07-18 20:09:24 +09:00
esenapaj
ff48bbb86a Update Japanese translation 
・Add new translation
 2016-07-18 17:01:56 +09:00
Scott Lahteine
46117593b9 Merge pull request #4185 from esenapaj/Update-Japanese-translation 
Update Japanese translation (work in progress)
 2016-07-17 18:36:34 -07:00
Scott Lahteine
3422103863 Merge pull request #4310 from thinkyhead/rc_mbl_position_shift 
Fix position shift with MBL
 2016-07-17 18:31:25 -07:00
Scott Lahteine
92757bd7b3 Merge pull request #4339 from esenapaj/Follow-up-the-PR-#4163 
Follow-up the PR #4163 (Mixing and Switching Extruders)
 2016-07-17 18:15:23 -07:00
Scott Lahteine
493d30cd97 Drop intermediate nx, ny, and set destination directly 2016-07-17 17:59:52 -07:00
Scott Lahteine
07a735ad22 We always use destination so modify mesh_buffer_line 2016-07-17 17:57:33 -07:00
Scott Lahteine
04a5b7b257 A macro to normalize positions 2016-07-17 17:57:32 -07:00
esenapaj
5c8e87a866 Follow-up the PR #4163 (Mixing and Switching Extruders) 
・Update forgotten K8400 files
 2016-07-18 09:48:13 +09:00
Scott Lahteine
86eb5251c5 Fix some debug messages 2016-07-17 17:10:02 -07:00
Scott Lahteine
1e57a6af73 Use blocking_move, current_position in G28 homing 2016-07-17 16:56:13 -07:00
Scott Lahteine
f6a3a1da09 nz and ne are always set, so drop them down 2016-07-17 14:12:39 -07:00
Scott Lahteine
d0009e013b Rename cell index vars 2016-07-17 14:12:39 -07:00
Scott Lahteine
697373b071 Reduce code size of mesh_buffer_line 2016-07-17 14:11:25 -07:00
Scott Lahteine
103d312f6d MBL can actually do up to 9 x 9 2016-07-17 14:11:25 -07:00
Scott Lahteine
f4a69281fc Only call mesh_buffer_line when MBL is active 2016-07-17 14:11:25 -07:00
Scott Lahteine
799a31cd30 Include the position_shift when splitting mesh lines 2016-07-17 14:08:20 -07:00
Scott Lahteine
f242aea032 Merge pull request #4319 from thinkyhead/rc_feedrates_to_mess_with_you 
Wrangle feed rate variables
 2016-07-17 14:07:52 -07:00
Scott Lahteine
0342661b3f Merge pull request #4335 from thinkyhead/rc_status_pad_jp 
Debug char, fix compile errors for lcd pins
 2016-07-17 14:07:08 -07:00
Scott Lahteine
81e01152bb Merge pull request #4336 from thinkyhead/rc_bltouch_sensor 
BLTouch probe sensor
 2016-07-17 14:06:32 -07:00
Scott Lahteine
1583177ef4 BLTOUCH probe config option 2016-07-17 13:55:38 -07:00
Scott Lahteine
176b9627c7 Some cleanup ahead of BLTOUCH support 2016-07-17 13:55:38 -07:00
Scott Lahteine
39706f3e57 Endstop invert flags as macros instead of const bool 2016-07-17 13:51:02 -07:00
Scott Lahteine
7242d44810 Endstops vars already initialized 2016-07-17 13:38:48 -07:00
Scott Lahteine
5ed1e7a464 codenum => dwell_ms 2016-07-17 13:35:21 -07:00
Scott Lahteine
69d6016941 Revert default state of endstops in M502 2016-07-17 13:35:21 -07:00
Scott Lahteine
0fcd3706dd Replace ENDSTOPS_ONLY_FOR_HOMING with ENDSTOPS_ALWAYS_ON_DEFAULT 2016-07-17 13:35:21 -07:00
Scott Lahteine
671634bf11 Fix spacing after section header 2016-07-17 13:35:21 -07:00
Scott Lahteine
f38553b482 fix a debug message 2016-07-17 13:29:42 -07:00
Scott Lahteine
3d78b8f929 Use HYPOT macro instead of hypot function 2016-07-17 13:29:42 -07:00
Scott Lahteine
9f9fe043ba Apply sq macro throughout 2016-07-17 13:29:41 -07:00
Scott Lahteine
93ba5bddd7 Append units to feedrate variables 2016-07-17 13:29:41 -07:00
Scott Lahteine
5e3d3918b6 Patch compile error for RAMPS LCD pins 2016-07-17 12:27:37 -07:00
Scott Lahteine
94955a8bf7 pad string in lcd_finishstatus 2016-07-17 12:27:37 -07:00
Scott Lahteine
21ee0612e3 Debug char 2016-07-17 12:27:36 -07:00
Scott Lahteine
8f24e0a556 Debugging of MBL in G28 2016-07-17 11:08:30 -07:00
Scott Lahteine
05da02f0a2 Implement MIXING_EXTRUDER and SWITCHING_EXTRUDER 2016-07-17 10:53:10 -07:00
Scott Lahteine
22b4cff423 New extruder type configuration options 2016-07-17 00:13:56 -07:00
esenapaj
601015b73e Update Japanese translation 2016-07-17 16:04:12 +09:00
Scott Lahteine
9766e24504 Merge pull request #4277 from thinkyhead/rc_mks_13_viki2 
Support for VIKI2 with MKS 1.3 / 1.4
 2016-07-16 23:49:33 -07:00
Scott Lahteine
02285662f5 Merge pull request #4298 from jbrazio/feature/filament-counter 
Adds filamentUsed and longestPrint stats to PrintCounter
 2016-07-16 23:48:46 -07:00
Scott Lahteine
bf16ae5a70 Merge pull request #4299 from jbrazio/feature/g27-park-nozzle 
Implements park nozzle feature
 2016-07-16 23:47:12 -07:00
Scott Lahteine
aaa0d298b9 Merge pull request #4326 from thinkyhead/rc_no_static_items_fix 
Suppress compiler warnings in ultralcd.cpp
 2016-07-16 23:38:08 -07:00
Scott Lahteine
cc3ef73583 Merge pull request #4327 from thinkyhead/rc_petrzjr_long_print 
LCD Longer print
 2016-07-16 23:37:34 -07:00
Scott Lahteine
77c8fb627f Merge pull request #4329 from thinkyhead/rc_italian_fix 
Added missing Italian translations
 2016-07-16 23:37:15 -07:00
Scott Lahteine
b14888501b Merge pull request #4301 from Ingramz/RCBugFix 
Add Cartesio CN Controls V11
 2016-07-16 22:35:07 -07:00
Silvio Didonna
32e0d71729 Added missing translations 2016-07-16 22:26:46 -07:00
Scott Lahteine
0f3232065e Merge pull request #4305 from jbrazio/feature/splash-improvement 
Custom boot screen feature improvement
 2016-07-16 21:59:39 -07:00
Petr Zahradník junior
2d7fe9dc78 LCD Longer print 2016-07-16 18:21:06 -07:00
Scott Lahteine
eee903bd4b Format some DAC lines 2016-07-16 17:59:13 -07:00
Scott Lahteine
d53dcaa796 Suppress some compiler warnings 2016-07-16 17:59:01 -07:00
João Brázio
fa4274cf4c Improves the custom bootscreen logo feature 2016-07-17 01:31:44 +01:00
João Brázio
1f3283e3a5 Adds custom boot logos for bq Hephestos 2 and Cartesio 2016-07-17 01:31:36 +01:00
João Brázio
dfa1c45075 Adds a notice to vendors about the SHOW_CUSTOM_BOOTSCREEN directive 2016-07-17 01:15:17 +01:00
Scott Lahteine
ed468e848f Merge pull request #4321 from esenapaj/Follow-up-the-PR-#4287 
Follow-up and fix the PR #4287 (Allow stopwatch and printcounter to go over 18:12:15)
 2016-07-16 17:14:21 -07:00
João Brázio
a8758619ec The safe_delay() is now globaly accessible 2016-07-16 12:28:06 +01:00
João Brázio
9a00108cb6 Adds the WEBSITE_URL as the boot screen line 2 2016-07-16 12:24:37 +01:00
João Brázio
f5234b0695 Adds a customizable screen timeout for the default boot screen 2016-07-16 12:24:36 +01:00
João Brázio
2f26bc2153 Adds filamentUsed and longestPrint stats to PrintCounter 2016-07-16 12:12:27 +01:00
João Brázio
336481ea81 Added G27 configuration options to all configs 2016-07-16 12:07:59 +01:00
João Brázio
c711701626 Implements a nozzle parking command (G27) 2016-07-16 12:07:59 +01:00
João Brázio
5f368d1bc3 Followup for #4320 2016-07-16 11:57:35 +01:00
João Brázio
d7c51bc4b9 Merge pull request #4320 from jbrazio/followup/4307 
Moves do_blocking_move_to_xy() out of the HAS_BED_PROBE define
 2016-07-16 11:48:00 +01:00
esenapaj
af9b1d79b1 Follow-up and fix the PR #4287 (Allow stopwatch and printcounter to go over 18:12:15) 
・Remove MSG_END_HOUR and MSG_END_MINUTE from all the language files
・Change from MSG_INFO_TOTAL_PRINTS to MSG_INFO_PRINT_COUNT in German
file
 2016-07-16 18:39:22 +09:00
Scott Lahteine
e563634a25 Merge pull request #4314 from AnHardt/use-d_b_m_t-in-g28 
Use do_blicking_move_to*() in G28
 2016-07-15 20:22:02 -07:00
Scott Lahteine
59ae1811c2 Merge pull request #4303 from AnHardt/delta-g28 
DELTA: Move out of the clip-zone after G28
 2016-07-15 20:20:22 -07:00
João Brázio
fdea8b6e6a Moves do_blocking_move_to_xy() out of the HAS_BED_PROBE define 2016-07-16 03:59:49 +01:00
AnHardt
d2a49c016d DELTA: Move out of the clip-zone after G28 
Move down to a safe height after G28 for DELTAs.
 2016-07-15 15:22:44 +02:00
AnHardt
46994fd17d Use do_blicking_move_to*() in G28 2016-07-15 15:02:15 +02:00
João Brázio
ffbb31b235 Fixes an PSTR overflow with print_xyz() 2016-07-15 11:25:34 +01:00
Indrek Ardel
ecb23c1b65 Add Cartesio CN Controls V11 board 2016-07-15 12:55:47 +03:00
Indrek Ardel
c8f2dd7cd5 Fix CN Controls 12 styling 2016-07-15 09:54:09 +03:00
Scott Lahteine
cec7110409 Merge pull request #4308 from thinkyhead/rc_debug_gcode_t 
Added logging related to gcode_T
 2016-07-14 19:46:33 -07:00
Scott Lahteine
6446d3939a Merge pull request #4309 from thinkyhead/rc_static_item_fix_77 
Fix skipping of static items
 2016-07-14 19:28:49 -07:00
Scott Lahteine
95ab2fd3ae Fix skipping of static items 2016-07-14 19:16:16 -07:00
Scott Lahteine
166f19251e Add more debugging for leveling 
- Especially in `gcode_T`
- In `update_software_endstops`
- Some tweaks to observe
 2016-07-14 19:04:13 -07:00
Scott Lahteine
7ac0b91a45 Collapsible long comment in gcode_T 2016-07-14 18:28:41 -07:00
João Brázio
e71a631f8f do_blocking_move_*() no longer depend on HAS_BED_PROBE 2016-07-15 01:54:14 +01:00
Scott Lahteine
8bf6861af8 Merge pull request #4054 from jbrazio/feature/g12-clean-tool 
Implements clean nozzle feature (Lulzbot's REWIPE)
 2016-07-14 14:38:38 -07:00
Scott Lahteine
c5e51f6b96 finished => completed 2016-07-14 11:46:35 -07:00
Scott Lahteine
1618870c84 card.printingHasFinished does print_job_timer.stop 2016-07-14 11:39:58 -07:00
Scott Lahteine
34da77dad3 Simply run M31 at the end of an SD print 2016-07-14 11:39:58 -07:00
Scott Lahteine
23d2bc5ab0 Patch Greek for new strings 2016-07-14 11:39:58 -07:00
Scott Lahteine
a8d71f0ac6 Support longer print times in M31 2016-07-14 11:39:58 -07:00
Scott Lahteine
e481b79af1 Allow stopwatch and printcounter to go over 18 hours 2016-07-14 11:39:57 -07:00
João Brázio
68c343a09a Added G12 configuration options to all configs 2016-07-14 00:38:42 +01:00
João Brázio
4937f9ada4 Minor G12 tweaks and point_t struct extension 2016-07-14 00:07:36 +01:00
Scott Lahteine
6080924589 Merge pull request #4296 from jbrazio/feature/bqh2-update 
Update the bq Hephestos 2 configuration
 2016-07-13 13:18:09 -07:00
Scott Lahteine
ed89c71e53 Merge pull request #4291 from esenapaj/Follow-up-the-PR-#4278 
Follow-up the PR #4278 (Fixups for PID_ADD_EXTRUSION_RATE and HOTENDS==1)
 2016-07-13 13:17:03 -07:00
João Brázio
021544f572 Improves G12 zig-zag pattern 2016-07-13 21:14:56 +01:00
João Brázio
b05a75655a Implements a nozzle cleaning pattern generator (G12) 2016-07-13 21:14:19 +01:00
João Brázio
005af84140
Update the bq Hephestos 2 configuration 2016-07-13 21:06:31 +01:00
esenapaj
8f03f0be9b Follow-up the PR #4252 (Replace PLA/ABS preheating with generic) 2016-07-13 22:42:16 +09:00
esenapaj
c2c8ab4698 Follow-up the PR #4278 (Fixups for PID_ADD_EXTRUSION_RATE and HOTENDS==1) 2016-07-13 22:24:31 +09:00
Scott Lahteine
4f77adddbe Merge pull request #4286 from thinkyhead/rc_debug_clean 
Prefix and suffix in debug output
 2016-07-12 20:49:15 -07:00
Scott Lahteine
e5c7af5ddc Merge pull request #4222 from thinkyhead/rc_allow_cold_extrude 
M302: Add "P" parameter, status output
 2016-07-12 20:40:14 -07:00
Scott Lahteine
2224032568 Merge pull request #4285 from thinkyhead/rc_manual_move_fast_fine 
No delay for the smallest LCD moves
 2016-07-12 20:16:38 -07:00
Scott Lahteine
cdd77d23bb Neaten up temperature member data 2016-07-12 20:04:15 -07:00
Scott Lahteine
d4c68279c8 Add "P" parameter to M302 2016-07-12 20:04:15 -07:00
Scott Lahteine
a5bae3c7d5 Merge pull request #4229 from blubbfish/patch-1 
Update language_de.h for German translation
 2016-07-12 20:01:46 -07:00
Scott Lahteine
a8b6b6a128 Merge pull request #4252 from thinkyhead/rc_rename_hpb 
Replace PLA/ABS preheating with generic
 2016-07-12 20:00:33 -07:00
Scott Lahteine
1e14df876d Use varname as prefix in DEBUG_POS, string as suffix 2016-07-12 19:58:09 -07:00
Scott Lahteine
9e8b3e5ee6 Homing direction is irrelevant in probe raise! 2016-07-12 18:09:02 -07:00
Scott Lahteine
ecd5e810ac No delay for the smallest LCD moves 2016-07-12 18:09:01 -07:00
Scott Lahteine
2b9515d60f Merge pull request #4281 from AnHardt/lang-system 
Don't use UTF-strlen() if the text is not UTF
 2016-07-12 17:21:28 -07:00
Scott Lahteine
973a669aa3 Merge pull request #4264 from thinkyhead/rc_ultralcd_encoder_pos 
Remove extraneous conditions for encoder position
 2016-07-12 16:54:13 -07:00
Scott Lahteine
e9f62d8fdb Remove extraneous conditions for encoder position 2016-07-12 16:41:00 -07:00
Scott Lahteine
7c81398f95 Merge pull request #4279 from esenapaj/Follow-up-the-PR-#4271 
Follow-up the PR #4271 (X_DUAL_STEPPER_DRIVERS)
 2016-07-12 16:39:37 -07:00
Scott Lahteine
0554b65d22 Merge pull request #4284 from thinkyhead/rc_serial_ln_macros 
Sled-probe sanity fix, conditionals for remaining types of leveling
 2016-07-12 16:36:33 -07:00
Scott Lahteine
655c3fd55f Move delta ABL sanity checks up 2016-07-12 16:10:16 -07:00
Scott Lahteine
db0882d068 AUTO_BED_LEVELING_3POINT and DELTA_BED_LEVELING_GRID 2016-07-12 16:10:11 -07:00
Scott Lahteine
e974ac63ef Init matrix in planner.init 2016-07-12 15:55:27 -07:00
Scott Lahteine
47d55513ec Merge pull request #4280 from AnHardt/msg-file-upload 
Finalalize MSG_SD_WRITE_TO_FILE message with a \n
 2016-07-12 13:02:52 -07:00
AnHardt
b273736962 Make MAPPER_NON the fall back mapper 
Make MAPPER_NON the fall back mapper - if no other is defined.
One list less to maintain.
 2016-07-12 19:59:14 +02:00
AnHardt
54d35230df Don't use UTF-strlen() if the text is not UTF 2016-07-12 19:59:03 +02:00
Scott Lahteine
a1de96d152 Merge pull request #4278 from thinkyhead/rc_more_hotends_1 
Fixups for PID_ADD_EXTRUSION_RATE and HOTENDS==1
 2016-07-12 10:36:13 -07:00
AnHardt
87957c7b44 Finalalize MSG_SD_WRITE_TO_FILE message with a \n 
Finalalize MSG_SD_WRITE_TO_FILE message with a \n
else RH hangs.
 2016-07-12 13:13:04 +02:00
esenapaj
9b5cbf2423 Follow-up the PR #4271 (X_DUAL_STEPPER_DRIVERS) 
・Update a forgotten Configuration_adv.h of K8400
 2016-07-12 17:50:49 +09:00
Scott Lahteine
809da999dc Apply HOTEND_INDEX in preheat methods 2016-07-11 22:27:25 -07:00
Scott Lahteine
3d78b690e5 Single PID dataset with HOTENDS == 1 2016-07-11 22:27:24 -07:00
Scott Lahteine
bf9967c65d Apply HOTEND_INDEX in MILLISECONDS_PREHEAT_TIME 2016-07-11 22:27:24 -07:00
Scott Lahteine
11dcbae7a2 Only a single E axis. Can tool-change reseed position[E_AXIS]? 2016-07-11 22:27:24 -07:00
Scott Lahteine
4865447830 Merge pull request #4276 from esenapaj/Suppress-warnings 
Suppress warnings
 2016-07-11 19:08:59 -07:00
Scott Lahteine
815df28b0b Merge pull request #4274 from esenapaj/Follow-up-the-PR-#4024 
Follow-up the PR #4024 (Greek Language by @psavva)
 2016-07-11 19:04:44 -07:00
Scott Lahteine
44f739a5eb Merge pull request #4273 from esenapaj/Fix-for-the-PR-#4256 
Fix for the PR #4256 (Additional tweaks for HOTENDS == 1)
 2016-07-11 19:02:45 -07:00
Scott Lahteine
02f711fe00 Merge pull request #4275 from AnHardt/dont-deploy 
Don't deploy/stow the probe if z-min-endstop is used for homing
 2016-07-11 18:46:23 -07:00
Scott Lahteine
6a45aad893 Merge pull request #4272 from AnHardt/m100-rep 
Repair M100
 2016-07-11 18:45:13 -07:00
Scott Lahteine
243ad4312a Merge pull request #4271 from thinkyhead/rc_X_DUAL_STEPPER_DRIVERS 
X_DUAL_STEPPER_DRIVERS
 2016-07-11 18:38:45 -07:00
Scott Lahteine
6e68dd292b Merge pull request #4243 from thinkyhead/rc_fix_static_scrolling 
Improve STATIC_ITEM implementation
 2016-07-11 18:25:00 -07:00
Scott Lahteine
d17b161832 Don't draw current screen if simply changing screens 2016-07-11 18:14:04 -07:00
Scott Lahteine
096f9981d1 Scroll to the top when changing screens 2016-07-11 18:14:04 -07:00
Scott Lahteine
7ae84d768e Tweak conditionals for REPRAPWORLD_KEYPAD 2016-07-11 18:14:04 -07:00
Scott Lahteine
155af6b861 Rename vars, add comments for menu macros 2016-07-11 18:14:04 -07:00
Scott Lahteine
31f2cf5f6f Make encoderLine signed for proper compares 2016-07-11 18:14:03 -07:00
Scott Lahteine
d9f75f62c0 START_ROW => START_COL 2016-07-11 18:14:03 -07:00
Scott Lahteine
d2099fef0d Left-justify thermistor info 2016-07-11 18:14:03 -07:00
Scott Lahteine
85aeb02aa6 Invert headings on Graphical LCD 2016-07-11 18:14:03 -07:00
Scott Lahteine
3a67fb77b0 Concatenate LCD static strings 2016-07-11 18:14:02 -07:00
Scott Lahteine
13dc619f43 Scroll static screens more simply 2016-07-11 18:14:02 -07:00
Scott Lahteine
5051723c2e Redraw after cursor correction in STATIC_ITEM 2016-07-11 18:14:02 -07:00
esenapaj
58177a1602 Suppress warnings 2016-07-12 08:22:24 +09:00
Scott Lahteine
10ebf28ee3 Allow override of ENCODER_FEEDRATE_DEADZONE, lower default for Viki 2016-07-11 15:43:08 -07:00
Scott Lahteine
9b1ba1012a Support for VIKI2 with MKS Gen 1.3 / 1.4 2016-07-11 15:43:08 -07:00
Scott Lahteine
55dc8051d8 Cleanup of RAMPS LCD pins 2016-07-11 15:38:55 -07:00
AnHardt
7bcab26f2a Don't deploy/stow the probe if z-min-endstop is used for homing 
Don't deploy/stow the probe if z-min-endstop is used for homing.
Don't apply `zprobe_zoffset` if probe was not used.
 2016-07-11 22:01:44 +02:00
esenapaj
84ded1f659 Follow-up the PR #4024 (Greek Language by @psavva) 
・Update forgotten Configuration.h of K8400
 2016-07-12 04:19:09 +09:00
esenapaj
6af525e252 Fix for the PR #4256 (Additional tweaks for HOTENDS == 1) 2016-07-12 03:51:29 +09:00
AnHardt
23e0134596 Repair M100 
M100 D was running too long - caused watchdog resets.
M100 I showed more free memory than a Arduino Mega has RAM.
 2016-07-11 20:44:30 +02:00
Scott Lahteine
4b4a582c4f X_DUAL_STEPPER_DRIVERS implementation 2016-07-11 10:22:19 -07:00
Scott Lahteine
91bd6eade7 X_DUAL_STEPPER_DRIVERS configuration option 2016-07-11 10:22:19 -07:00
Scott Lahteine
6121c9018a Merge pull request #4265 from thinkyhead/rc_buzzer_patchup 
Two strategies to address a stuck buzzer
 2016-07-10 19:46:15 -07:00
Scott Lahteine
4a100c6832 Merge pull request #4250 from AnHardt/wait-for-cooling-slope 
Adjust wait_for_cooling slope
 2016-07-10 19:45:23 -07:00
Scott Lahteine
ed018c98d5 Merge pull request #4024 from thinkyhead/rc_greek_language 
Greek Language by @psavva
 2016-07-10 19:42:09 -07:00
Scott Lahteine
d1dffc7ad1 timestamp => endtime 2016-07-10 19:36:46 -07:00
Scott Lahteine
71674059c3 Two strategies to address a stuck buzzer 2016-07-10 19:25:23 -07:00
Scott Lahteine
928ff6487a Greek language pack from @psavva 2016-07-10 18:59:04 -07:00
AnHardt
e92e58df1f Adjust wait_for_cooling slope 
Adjust wait_for_cooling slope
and drop mintemp for cooling.

See
https://github.com/MarlinFirmware/Marlin/pull/4169#issuecomment-231544532
 2016-07-11 03:36:23 +02:00
Scott Lahteine
167f4aa0cc Merge pull request #4259 from clexpert/patch-3 
Update language_cz.h
 2016-07-10 18:26:23 -07:00
Scott Lahteine
8dda05e92a Merge pull request #4258 from clexpert/patch-2 
Total print time for LCD correction (hours:minutes format)
 2016-07-10 18:25:18 -07:00
Scott Lahteine
182c8d7f8f Dyze High Temp Thermistor Support 2016-07-10 17:59:05 -07:00
Scott Lahteine
5b0e46c986 Merge pull request #4256 from thinkyhead/rc_fix_singlenozzle_temp 
Additional tweaks for HOTENDS == 1
 2016-07-10 17:57:00 -07:00
Scott Lahteine
ee0983ab57 Further reduction when HOTENDS == 1 2016-07-10 16:54:30 -07:00
Scott Lahteine
3e1bbd5e27 Indentation in gcode_M100 2016-07-10 16:33:51 -07:00
Scott Lahteine
b72238f406 Invariant get_pid_output with HOTENDS < 2 2016-07-10 16:33:51 -07:00
Petr Zahradnik
66602f4af6 Update language_cz.h 
New strings:
#define MSG_HALTED
#define MSG_PLEASE_RESET
Some texts shortened for smaller displays.
 2016-07-10 13:25:50 +02:00
Petr Zahradnik
eaf9e615ce Total print time for LCD correction (hours:minutes format) 2016-07-10 13:08:05 +02:00
esenapaj
9e56d5825e Adjust spacing 2016-07-10 14:25:29 +09:00
esenapaj
5832f4b848 Follow-up the PR #4253 (Runout Sensor without SD Card, Print Timer support in M104) 
・Update forgotten example configuration files
 2016-07-10 14:24:57 +09:00
Scott Lahteine
77283f5bf0 Merge pull request #4245 from thinkyhead/rc_simpler_therm_check 
Simpler/extensible thermistor test in thermistortables.h
 2016-07-09 21:13:42 -07:00
Scott Lahteine
f9e08b1fcd Merge pull request #4254 from AnHardt/killscreen 
Add a kill-screen
 2016-07-09 20:44:42 -07:00
AnHardt
faac2bcfdb Add a kill-screen 2016-07-10 04:50:45 +02:00
Scott Lahteine
3b3e52616c Merge pull request #4253 from thinkyhead/rc_clexpert_runout 
Runout Sensor without SD Card, Print Timer support in M104
 2016-07-09 19:10:36 -07:00
Scott Lahteine
aa3ab93971 Merge pull request #4240 from AnHardt/sampler-8-7-16 
Today's fix and cleanup collection
 2016-07-09 19:09:45 -07:00
Scott Lahteine
4cd045791c Reduce code size by trusting the compiler 2016-07-09 18:17:44 -07:00
Scott Lahteine
a8538bd7ce General cleanup, code reduction in Marlin_main.cpp 2016-07-09 18:17:44 -07:00
Scott Lahteine
1026e5b071 Replace PLA/ABS preheating with generic 2016-07-09 18:06:51 -07:00
Petr Zahradnik
e282d69f63 Print job timer comment changed 2016-07-09 17:57:54 -07:00
Petr Zahradnik
a2159cfbc3 Error message change in SanityCheck.h 2016-07-09 17:57:54 -07:00
Petr Zahradník junior
315b4c2153 Runout sensor without SD Card 2016-07-09 17:57:53 -07:00
Scott Lahteine
51c9c3fe2c Indentation in MarlinSerial.cpp 2016-07-09 17:57:53 -07:00
Scott Lahteine
e03414b2dd Simpler/extensible thermistor test in thermistortables.h 2016-07-08 19:54:45 -07:00
AnHardt
4b44a23a36 Add TX-buffer for MarlinSerial 
Similar to the current Arduino HardwareSerial
but with max. 256 byte buffer-size.

Deactivated by default.

The boards with AT90USB processor (USBCON) already use a TX-buffer.
 2016-07-08 17:25:21 +02:00
AnHardt
468f7f03a2 homeaxis() can leave early 
when no known axis needs to be homed.

Most changes are only caused from altering the indentation.
```
if (axis == X_AXIS ? HOMEAXIS_DO(X) : axis == Y_AXIS ? HOMEAXIS_DO(Y) : axis == Z_AXIS ? HOMEAXIS_DO(Z) : 0) {
  ...
}

to

if (!(axis == X_AXIS ? HOMEAXIS_DO(X) : axis == Y_AXIS ? HOMEAXIS_DO(Y) : axis == Z_AXIS ? HOMEAXIS_DO(Z) : 0)) return;
...

```
 2016-07-08 15:59:33 +02:00
AnHardt
eff7912243 Ensble/disable hardware endstops in G28 globally. 
For moving away from the endstops we do not have to disable them.
They are not tested anyway.
 2016-07-08 15:49:10 +02:00
AnHardt
f69434d81c Eliminate void setup_for_endstop_move() 2016-07-08 15:23:20 +02:00
AnHardt
0ea6247fc2 Use logic in Z_SAFE_HOMING 
Use logic in Z_SAFE_HOMING

From
```
if (home_all_axis || homeZ) {
  if (home_all_axis) {
  ...
  home z
  }
  else if (homeZ) { // Don't need to Home Z twice
  home z
  }
}

```
to
```
if (home_all_axis || homeZ) {
  if (home_all_axis) {
  ...
  }
  home z
}
```
 2016-07-08 15:08:50 +02:00
AnHardt
de3a169336 Always define MIN_Z_HEIGHT_FOR_HOMING even if 0 
Always define MIN_Z_HEIGHT_FOR_HOMING even if 0
Always make a potential rise to `home_offset[Z_AXIS]` possible in G28.
Get rid of some very ugly constructs in MBL (ultralcd.cpp).
 2016-07-08 15:08:32 +02:00
AnHardt
88ed232f53 Remove HAS_BED_PROBE case in first raise in G28 
Differentiating made sense here when we could save a dozen lines of code,
but not for one line.
 2016-07-08 14:59:44 +02:00
AnHardt
653eff3b31 Clean up quick_home_xy() 
Since we do the actual homing now in the 'normal' routines `quick_home_xy()`
can be simplified to a relative simple diagonal move.
 2016-07-08 14:59:27 +02:00
Scott Lahteine
98d0167a57 Merge pull request #4226 from thinkyhead/rc_emergency_command_parser 
MarlinSerial emergency-command parser (with M108)
 2016-07-07 16:53:55 -07:00
Scott Lahteine
2ee4e4f791 Make wait_for_heatup volatile 2016-07-07 16:37:23 -07:00
Scott Lahteine
bd5a825b8b Wait for end of line before invoking action 2016-07-07 16:37:23 -07:00
Scott Lahteine
ea47803ae2 Simplify emergency parser (only parse initial command) 2016-07-07 16:37:22 -07:00
Scott Lahteine
834ad14c8d Add quickstop_stepper to update current position with stepper.quick_stop() 2016-07-07 16:37:22 -07:00
Scott Lahteine
ecffe92e20 Group EMERGENCY_PARSER commands 2016-07-07 16:37:22 -07:00