Commit graph

7260 commits

Author SHA1 Message Date
Øystein Krog
e948f77cf9 Fix DUAL_X_CARRIAGE not moving at all
Axis would only move when homing.
Bug introduced in 91841d75c9.
Fixes #6956, fixes #7050 and fixes #7291
2017-07-31 18:44:26 +02:00
Scott Lahteine
08b0456d91 Merge pull request #7379 from thinkyhead/bf_manual_bed_level_floor
Manual Bed Leveling: Goto previous Z height at each probe point
2017-07-30 05:41:12 -05:00
teemuatlut
936d00dda8 Implement probing delay for piezo sensors 2017-07-29 21:46:40 -05:00
Scott Lahteine
29eef360d0 Merge pull request #7308 from thinkyhead/bf_cleanup_config_adv
Fixes for FWRETRACT
2017-07-29 21:20:19 -05:00
Wilfried Chauveau
894608f8a3 Manual Bed Leveling: Goto previous Z height at each probe point 2017-07-29 21:15:37 -05:00
Scott Lahteine
ff06e1a030 Merge pull request #7372 from tcm0116/delta_calib_menu
Move Delta Calibration menu to the Prepare menu
2017-07-29 21:05:03 -05:00
Thomas Moore
15e009b6ca Move Delta Calibration menu to the Prepare menu 2017-07-28 08:33:18 -05:00
Scott Lahteine
bfd396c13a Patch to fix some compiler warnings 2017-07-28 02:27:16 -05:00
Scott Lahteine
48c5f3dddf Tweak kill action #ifdef 2017-07-27 23:42:01 -05:00
Scott Lahteine
be7a9a07c5 Don't reset grid with G29 Q + PROBE_MANUALLY 2017-07-27 22:47:43 -05:00
Scott Lahteine
dfe670247d Merge pull request #7363 from marcio-ao/bugfix-1.1.x
Makefile fixes and U8G support.
2017-07-27 21:31:56 -05:00
Marcio Teixeira
af83c512b8 Added support for U8G. 2017-07-27 07:49:25 -06:00
Scott Lahteine
4eff18854b Rename options with swap_ prefix 2017-07-27 04:14:29 -05:00
Scott Lahteine
14482d2f2a Strip auto-retract for impossible M(IN|AX)_AUTORETRACT combo 2017-07-27 04:14:29 -05:00
Scott Lahteine
9fc72422e4 Don't let the flow multiplier affect retract/recover length 2017-07-27 04:14:29 -05:00
Scott Lahteine
fee696db5d Improve retract() for G10/G11/autoretract 2017-07-27 04:14:29 -05:00
Scott Lahteine
423b0f3a1e Replace MIN_RETRACT with MIN_AUTORETRACT, MAX_AUTORETRACT 2017-07-27 04:14:29 -05:00
Scott Lahteine
51864fd365 Add bed size as a configuration option 2017-07-26 23:04:54 -05:00
Scott Lahteine
dc7c95e07b Remove @ section fwretract 2017-07-26 22:46:16 -05:00
Dave Johnson
4718c09c48 Remove extraneous USBCON defines for AT90USB boards
USBCON is definied by serial.h pullikng in MarlinConfig.h which in turn pulls in Arduino.h.  Defining in later includes has shown to cause compile issues so removing all extraneous calls for and potentially easier future linker troubleshooting.
more USBCON unification
2017-07-23 16:41:48 -07:00
C. Scott Ananian
890e7a16a9 Add support for Printrbot Neopixel RGBW strip.
Connected as described at http://printrbot.com/shop/led-strip/

Based on patch by Kelly Anderson <kelly@xilka.com> at
http://www.xilka.com/printrbot/marlin/1.1.4/20170707/
2017-07-22 16:07:55 -05:00
Scott Lahteine
a059e95463 Bring Infitary i3 config up to date 2017-07-21 20:49:19 -05:00
Scott Lahteine
d6d6043548 Merge pull request #7338 from thinkyhead/bf_mks_ps_on_pin
MKS 1.3+: Add pin mapping for PS_ON
2017-07-21 20:00:26 -05:00
Alexey Shvetsov
851f9f5399 Update Russian translation - Part 1
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
2017-07-21 19:32:37 -05:00
Scott Lahteine
b7a16e4468 Merge pull request #7315 from fixoid/patch-1
Fixing SWITCHING_EXTRUDER feature to work with HOTENDS > 1
2017-07-21 19:10:54 -05:00
Alexey Shvetsov
f38b8c5bf8 MKS 1.3+: Add pin mapping for PS_ON
This allows the use of D4 as PS_ON since MKS Gen doesn't have a PS_ON pin. However this effectively allows only 3 servos (instead of 4).

Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
2017-07-21 18:50:05 -05:00
Scott Lahteine
8a3bc6be4d Improve FWRETRACT config options and commentary
Add more details as requested in #7198
2017-07-20 22:57:50 -05:00
Scott Lahteine
b0173ccdb9 Drop extra initializers for vars initialized by EEPROM code 2017-07-20 22:57:49 -05:00
Scott Lahteine
7afafb05b8 Split G10/G11 into separate functions 2017-07-20 02:24:13 -05:00
Scott Lahteine
c45798694f Add some more requirements to the G-code list 2017-07-20 02:24:13 -05:00
Scott Lahteine
72de280c1e BARICUDA valve pressure consistently uint8_t 2017-07-20 02:21:40 -05:00
Scott Lahteine
4d98e3f0a7 General cleanup 2017-07-20 02:21:40 -05:00
fixoid
e530c67349 Fixing SWITCHING_EXTRUDER feature 2017-07-19 21:15:26 +03:00
Tannoo
2ad3ca5d8a Bugfix (#7310) 2017-07-18 22:55:14 -05:00
Roxy-3D
37a6833d7e Allow the sampled point to be added into the Least Squares Best Fit (#7289)
Without this...  The LSF won't work because none of the sampled points
in this code block get added.
2017-07-13 16:33:02 -05:00
C. Scott Ananian
a519b093b9 Fix build by replacing qr_solve by least_squares_fit. (#7285)
This was broken by 9af67e2446.
2017-07-13 12:02:15 -05:00
Scott Lahteine
0873c667fa Apply coding standards to recent merges 2017-07-13 00:46:16 -05:00
Scott Lahteine
8c2907d10f Fix ABL broken by recent change 2017-07-12 22:56:18 -05:00
Roxy-3D
9af67e2446 Save 7714 bytes of program memory when doing AUTO_BED_LEVELING_LINEAR (#7276)
We can save more and a pile of RAM by eleminating the eqnBVector and
EqnAMatrix arrays next.
2017-07-10 19:05:11 -05:00
Scott Lahteine
76e90b93b7 Volatile keyword not needed for parser.seen 2017-07-10 15:38:54 -05:00
Jamie Bainbridge
00e4ced58e Stay in User Menu after command. Add feedback.
When a user executes a User Menu command, the LCD returns to the main menu. If the user has multiple menu items they want to run, such as one menu item per bed leveling corner, then it's better to stay in the User Menu rather than return to the main menu.

This PR modifies Marlin to stay in the User Menu after a command.
2017-07-10 13:47:12 -05:00
Scott Lahteine
1066b17457 Merge pull request #7260 from thinkyhead/bf_G33_update_27
Updates to G33 and its LCD code
2017-07-10 13:39:36 -05:00
Tannoo
e927941c06 Bugfix (#7265)
Fix compile error when UBL is enabled but there is no LCD Panel.
2017-07-08 09:44:50 -05:00
Scott Lahteine
68aea9c01d Merge pull request #7261 from thinkyhead/bf_configs_by_vendor
Arrange more example configs by vendor
2017-07-07 15:46:22 -05:00
Tannoo
aaacef9441 Corrections (#7231)
20x4 map integration.    Also some minor changes to the UBL Menu layout.     Both 20x4 LCD's and Graphical LCD panels should have similar functionality now.
2017-07-07 11:05:08 -05:00
LVD-AC
4bc79ec877 Updates for G33-LCD interface 2017-07-07 05:00:59 -05:00
Scott Lahteine
186580b55f Arrange example configurations by vendor 2017-07-07 04:48:23 -05:00
Scott Lahteine
6be369f3ea Add some config names to AUTHOR 2017-07-07 04:46:33 -05:00
Scott Lahteine
7fc31a7940 Merge pull request #7258 from thinkyhead/bf_cleanups_jbrazio
Add support for BQ heated bed kit with Hephestos 2
2017-07-07 04:11:07 -05:00
Scott Lahteine
11e376e920 Merge pull request #7256 from thinkyhead/bf_cleanup_july_6
Assign -1 to LCD_PINS_D4-7 if not defined
2017-07-07 03:22:47 -05:00
João Brázio
2065591daf Add support for BQ heated bed kit with Hephestos 2 2017-07-07 03:10:38 -05:00
essgcee
61be28133d Support for Creality CR-10
Creality board is a Melzi / Sanguinololu variant, but using different pins for LCD control (and maybe other minor variations)
2017-07-06 23:08:10 -05:00
Scott Lahteine
9248a90a4c Assign -1 to LCD_PINS_D4-7 if not defined 2017-07-06 22:47:51 -05:00
Scott Lahteine
5ef1e5ef60 Tweaks for M43 2017-07-06 21:47:50 -05:00
Scott Lahteine
c7732db99d Fix: Use of digitalRead, digitalWrite breaks on AT90USB 2017-07-06 21:25:56 -05:00
Scott Lahteine
f713f25fa5 Clean up excess whitespace 2017-07-06 21:24:30 -05:00
Scott Lahteine
fc9ce65095 Add BUSY_WHILE_HEATING for hosts that need it 2017-07-06 16:28:57 -05:00
Scott Lahteine
c6d430670a Clear SHOW_BOOTSCREEN with no LCD 2017-07-06 14:21:27 -05:00
Scott Lahteine
11c589c3ec Fix compile issue with G38
Fixes #7250
2017-07-06 14:21:27 -05:00
Scott Lahteine
678914be25 Patch M23 to work around Simplify3D bug
Addressing #7227
2017-07-06 14:00:58 -05:00
LVD-AC
3efe4aeef8 Add PROBE_MANUALLY support to G33 2017-07-04 18:06:54 -05:00
Scott Lahteine
cca1cca3a5 Merge pull request #7237 from thinkyhead/bf_cz_mapper
UTF-8 mapper for Czech
2017-07-04 16:45:13 -05:00
Scott Lahteine
a2babb532d Merge pull request #7217 from benlye/add-kill-action
Add configurable action command to send when printer is killed
2017-07-04 16:44:08 -05:00
Petr Zahradník
8c34233452 UTF-8 mapper for Czech 2017-07-04 15:51:23 -05:00
Dave Johnson
20f6676d63 DISABLE_[XYZ] compatibility check
DISABLE_[XYZ] is incompatible with HOME_AFTER_DEACTIVATE and Z_SAFE_HOMING
2017-07-03 17:23:53 -07:00
Ben Lye
c28749a567 Add kill action
Sends pre-defined string as action command when printer is kill.
2017-07-03 23:45:19 +01:00
Scott Lahteine
df87278fce Add "CAP:PRINT_JOB:1" (M75 / M76 / M77) to M115 output 2017-07-03 15:59:06 -05:00
Scott Lahteine
4be8d7720e Fix spelling of "Chinese" 2017-07-03 15:24:49 -05:00
LVD-AC
567941e341 Fix for issues #6997 and #7152
Probing with the effector in the printing area, but an eccentric probe (e.g. allen key) outside it but still touching the bed gives meaninfull information for calibration. Since calibration is most accurate when probing as close to the towers as possible the testing was way to restrictive hence this fix.
2017-07-03 02:53:49 -05:00
Scott Lahteine
57fff2e95e Merge pull request #7219 from thinkyhead/bf_update_git_scripts
Update Marlin+git helper scripts
2017-07-03 01:49:27 -05:00
Scott Lahteine
6a3967ee33 Corrections for probe_pt parameters 2017-07-03 01:34:27 -05:00
Scott Lahteine
534bffa7a9 Correct comment on ABL G29 2017-07-03 01:13:07 -05:00
Scott Lahteine
e1e1a0c344 Provide a default CUSTOM_BOOTSCREEN_TIMEOUT 2017-07-03 01:13:07 -05:00
Scott Lahteine
69297b2d7b Make all EEPROM optimization options available 2017-07-02 20:47:03 -05:00
Scott Lahteine
d609489b22 Drop setup_homepin 2017-07-02 02:27:09 -05:00
Scott Lahteine
167169e1bf Sanity check for a real probe with M48 2017-07-02 02:27:09 -05:00
Scott Lahteine
395a9f59ac Merge pull request #7211 from thinkyhead/bf_lcd_bootscreen
Use lcd_bootscreen for both
2017-07-02 02:11:07 -05:00
Scott Lahteine
14663efe0d Merge pull request #7210 from fiveangle/printrboard_revf_cleanup
Printrboard RevF cleanup
2017-07-02 01:02:26 -05:00
Scott Lahteine
ae5923a3d0 Make lcd_bootscreen common to both 2017-07-02 00:47:36 -05:00
Scott Lahteine
859248433f Patch for gcode debug 2017-07-02 00:47:35 -05:00
Dave Johnson
09c90c2f6c Printrboard RevF Cleanup
-Update Arduino IDE extension descriptions
-Set default motor currents if not defined in Configuration_adv.h
-Support for MINIPANEL LCD
-Support for choosing internal or panel SD
2017-07-01 22:33:39 -07:00
Scott Lahteine
232a10410d LCD_FOR_MELZI 2017-07-01 22:32:20 -05:00
Scott Lahteine
76c92a1fab Clean up some trailing spaces 2017-07-01 22:32:20 -05:00
Scott Lahteine
cf96109056 Implement the EEPROM_CHITCHAT option 2017-07-01 21:48:18 -05:00
Scott Lahteine
dcec7178d1 Expose DISABLE_M503 option as a test option 2017-07-01 21:31:28 -05:00
Scott Lahteine
3e78a01262 Merge pull request #7204 from thinkyhead/bf_update_ubl_lcd
UBL radar map corrections
2017-07-01 20:59:03 -05:00
Tom
1ff7d10c80 Add configuration for Infitary M508 (i3 clone)
Based on Infitary's own firmware settings.
2017-07-01 20:04:08 -05:00
Scott Lahteine
4cb45c10dd Patch ubl lcd mesh map indentation 2017-07-01 19:47:52 -05:00
Scott Lahteine
abd6ba62b4 Some cleanups for ubl lcd mesh map 2017-07-01 19:47:49 -05:00
Scott Lahteine
f17bae1f70 Changes for ubl_lcd_map_control patch 2017-07-01 19:47:02 -05:00
Tannoo
8e0f3b7eba UBL radar map corrections 2017-07-01 19:00:44 -05:00
Bob-the-Kuhn
fcceed5be6 intermittent Teensy & G26 compile problem
===============================================

also an issue with ubl_motion.cpp
2017-07-01 14:41:24 -05:00
Scott Lahteine
30b327d24c Finish the solution for #7166 2017-06-29 15:17:39 -05:00
Scott Lahteine
6c97c5595c Add a sanity check for DELTA_AUTO_CALIBRATION 2017-06-29 15:03:19 -05:00
Bob-the-Kuhn
e6e3132f79 make LETTTER_OFF return values that match param indices range 2017-06-29 09:01:58 -05:00
Bob-the-Kuhn
bfbf5f8200 correct value_bool() when FASTER_GCODE_PARSER is enabled
Also corrected compile issue when DEBUG_GCODE_PARSER and
AUTO_BED_LEVELING_UBL are both enabled.
2017-06-28 19:51:08 -05:00
Scott Lahteine
406ef69702 Move Anet A8 config to subfolder 2017-06-28 16:58:57 -05:00
Scott Lahteine
379926961c Add Anet A6 config, edit Anet A8 config 2017-06-28 16:58:57 -05:00
Scott Lahteine
5b03f23fa2 Bring configurations up to date, fix some comments 2017-06-28 16:41:49 -05:00
Scott Lahteine
e3cedfa0ec Fix a compiler warning 2017-06-28 16:41:46 -05:00
Scott Lahteine
bb0508b6cf Fix comment in M115 code 2017-06-28 13:08:33 -05:00
Scott Lahteine
85777a56c6 Add A (action) and E (echo) parameters to M118 2017-06-28 02:07:59 -05:00
Scott Lahteine
d1e8d4cd9d Merge pull request #7167 from thinkyhead/bf_20x4_lcd_update
UBL Map Cleanup and LCD display
2017-06-28 01:20:22 -05:00
Scott Lahteine
b492e0878d Changes to reduce and simplify 2017-06-28 01:10:30 -05:00
Ben Lye
98d362c2da Adding M118 command to send text to serial
Allows the user to send text to the serial console in order to
communicate with a host - sending debuging information or action
commands, for example.  Text must begin with '//' and this is added if
it is not already present at the beginning of the string.
2017-06-28 00:55:20 -05:00
Tannoo
80abc872f3 Updated to better support the coming "radar" 2017-06-27 22:51:58 -05:00
Tannoo
e90cbf5c16 UBL Map Cleanup 2017-06-27 22:51:58 -05:00
Scott Lahteine
fc140c4962 Followup for I2C_POSITION_ENCODERS 2017-06-27 20:46:40 -05:00
Scott Lahteine
f4246dc8ff Merge pull request #7165 from thinkyhead/bf_parser_shorthand
Use parser.seenval, add shorthand functions
2017-06-27 18:57:48 -05:00
Scott Lahteine
bd776df8c1 Optimize seen_axis by moving 'X' to index 24 2017-06-27 18:47:11 -05:00
Scott Lahteine
05449cf6ee Add shorthand value accessors to gcode.h 2017-06-27 18:39:41 -05:00
Scott Lahteine
12f092c812 Cleanups to gcode.h, use seenval() 2017-06-27 17:57:00 -05:00
Scott Lahteine
941943c167 Apply const, spacing, etc. 2017-06-27 05:23:49 -05:00
Scott Lahteine
5b11b33854 Add support for Průša MK2 Multiplexer 2017-06-27 04:55:30 -05:00
Scott Lahteine
a4a587a897 Fix spelling of Průša 2017-06-27 04:46:46 -05:00
Scott Lahteine
ba1706a265 Fix spacing in gcode.cpp
Followup to #6940
2017-06-27 04:46:46 -05:00
Scott Lahteine
c2c8aafda2 Merge pull request #7157 from thinkyhead/bf_g33_f_parameter
G33 F and Height bug fix
2017-06-27 04:36:22 -05:00
Scott Lahteine
627afb29df Merge pull request #7109 from tnw513/fix-italian
added missing italian translation
2017-06-27 04:12:30 -05:00
Scott Lahteine
f0f9fb7465 Remove line that does nothing 2017-06-27 04:08:50 -05:00
LVD-AC
99592c8458 Update G33: Add F, fix height bug 2017-06-27 04:02:02 -05:00
Ben Lye
31514f453a Fix #ifdef AVR_AT90USB1286_FAMILY in pinsDebug
Can't compile with PINS_DEBUGING enabled on Atmega1284p because it tries
to enumerate pins 46 and 47 (which don't exist) because `#ifdef
AVR_AT90USB1286_FAMILY ` doesn't work as expected.
2017-06-27 08:04:40 +01:00
Scott Lahteine
134116b874 Merge pull request #7153 from thinkyhead/bf_czech_update
Updated Czech language
2017-06-26 17:34:15 -05:00
Petr Zahradník
e80958b631 CZ Translate BLTouch and UBL
Fixup length
2017-06-26 16:15:31 -05:00
Scott Lahteine
fe7e890b09 Fix issues with ADC_KEYPAD
Fixes #7150
2017-06-26 16:08:31 -05:00
dot-bob
a1632cfa0a Added option 'H' to G29 P4.
- Added `H` to set a nozzle height adjustment to surface of the bed.
- Updated G29 P4 comments to reflect changes.
2017-06-25 17:14:08 -05:00
Scott Lahteine
e687782875 Merge pull request #7134 from thinkyhead/bf_skynet_a3_ready
Add Skynet/ANET A10 support
2017-06-25 14:35:22 -05:00
dot-bob
b3c36c98fd Edit digipot currents via LCD, save to EEPROM 2017-06-25 01:02:36 -05:00
Scott Lahteine
3c7bfe798d Various cleanups ahead of digipot save 2017-06-24 23:56:24 -05:00
Bob-the-Kuhn
9651d01e1a Add Skynet/ANET A10 support 2017-06-24 19:07:03 -05:00
Scott Lahteine
eb314373bb Config spacing & consistency, group custom LCDs 2017-06-24 14:33:40 -05:00
Scott Lahteine
6c45fa7dcc Apply #elif in LCD conditionals 2017-06-24 13:56:33 -05:00
Scott Lahteine
afbc6e3e2f Update DELTA/SCARA config comments 2017-06-24 12:47:17 -05:00
Paweł Stawicki
1e47c17b46 Fix: set digipot mcp4018 Vrefmax to 1.666V 2017-06-24 12:35:34 -05:00
Scott Lahteine
80a232419d CNC workspace planes and 'P' argument for G2/G3 2017-06-23 14:53:03 -05:00
Scott Lahteine
5fb0d401eb Formatting tweaks 2017-06-23 14:53:02 -05:00
Scott Lahteine
ed04d0b6be Label DualXMode enums 2017-06-23 14:53:02 -05:00
Scott Lahteine
786cdea124 Ensure REPRAPWORLD_KEYPAD_MOVE_STEP is defined 2017-06-23 14:53:01 -05:00
Scott Lahteine
ee7163fd3a Fix pinsDebug compile errors 2017-06-23 14:53:01 -05:00
Scott Lahteine
a9f8e518bf Fix FILAMENT_WIDTH_SENSOR infinite loop issue
Addressing #6992 and #5851
2017-06-23 14:53:01 -05:00
Scott Lahteine
254a11b083 Merge pull request #7120 from thinkyhead/bf_sainsmart_link
Add link to F. Malpartida LiquidCrystal library
2017-06-22 14:04:23 -05:00
Scott Lahteine
aeb6d465a4 Merge pull request #7118 from thinkyhead/bf_french_update
French update
2017-06-22 13:10:07 -05:00
Bob-the-Kuhn
325f09ea6c Add link to custom LiquidCrystal library by F. Malpartida 2017-06-22 13:07:08 -05:00
MagoKimbra
d26c8cc5c8 fix_planner_refresh_e_positioning (#7103)
* fix_planner_refresh_e_positioning

* Fix
2017-06-22 12:59:22 -05:00
Gege2B
c7f04fbcc7 French translation 2017-06-22 12:49:23 -05:00
Silvio Didonna
4171520729 added missing italian translation 2017-06-21 11:08:39 +02:00
Bob-the-Kuhn
41bfff14e2 Merge pull request #6991 from Bob-the-Kuhn/Mesh-with-babystepping
Mesh with BABYSTEP_ZPROBE_OFFSET: add sanity check
2017-06-20 16:36:22 -05:00
Scott Lahteine
424d0bae8b Merge pull request #7100 from thinkyhead/bf_HAL_prepare
Apply maths macros and type changes ahead of HAL
2017-06-20 01:15:23 -05:00
Scott Lahteine
5c59ee4e93 Use current (raw) Z if omitted from G29 WXY or G29 WIJ. 2017-06-20 00:10:52 -05:00
Scott Lahteine
37bc0fce62 Make G29 compatible with M206 Z and G92 Z
Use the raw position for mesh measurement. Otherwise the `M206` and
`M92` Z offsets will get canceled out by bed leveling. The downside is
`G29` will not compensate for a poorly set small `M206` fudge value.

To elaborate on this issue, imagine you are probing with a Z home
offset of -0.1, meaning when Z homes, -0.1 is the current position,
implying the ideal bed zero for the nozzle is 0.1mm higher than the Z
endstop. Ordinarily when printing, Z would raise 0.1mm higher.

What happens when we probe is that all points are measured with that
-0.1 included. So when bed leveling is enabled the `M206 Z` offset gets
exactly canceled out by the bed readings.
2017-06-20 00:09:59 -05:00
Scott Lahteine
6c45d0fd81 Apply maths macros and type changes ahead of HAL 2017-06-19 22:57:42 -05:00
Scott Lahteine
8a51e2960c Improve the experience of editing steps_per_mm 2017-06-19 22:17:15 -05:00
Scott Lahteine
725d9d9a56 Fix and improve LCD value editing display
- Fix: When "100.0" changes to "99.0" the LCD shows "199.0"
- Use 2 rows if needed on character LCD, (allowing longer labels…
Germany, et. al.)
- Known issue: A certain length label combined with a certain value
drawing function could, for example, display 99.0 on 1 line, but 100.0
on two lines. Workaround would be to pass a nominal value size argument.
2017-06-19 22:17:15 -05:00
Scott Lahteine
499bb85a95 Clean up, put ubl menu itemization closer at hand 2017-06-19 22:17:14 -05:00
Tannoo
90f5f82926 Step-by-Step Menu addition 2017-06-19 20:15:11 -05:00
Scott Lahteine
0c616700f3 Merge pull request #7097 from thinkyhead/bf_dac_percents_fix
Convert DAC percent to uint8_t
2017-06-19 17:58:55 -05:00
Florian Heilmann
6dcf42f1a7 Add Z Fade Height to M420 output if it is enabled (#7042)
* Add Z Fade Height to M420 Output

Echo the z-fade height when M420 is called, if it is enabled.

* Fix Whitespace

* Fix Compiler complaint

* Missing semi-colon
2017-06-19 17:53:07 -05:00
Bob-the-Kuhn
a1c65fd3d5 convert DAC percent to uint8_t
=====================

add test to Travis
2017-06-19 17:46:41 -05:00
Scott Lahteine
907cafcbfd Support for two switching extruders 2017-06-19 17:20:59 -05:00
Ross Allan
cfcd069501 Fix #5699 - LIN_ADVANCE freeze when ADV_RATE returns 0 2017-06-19 14:02:17 -05:00
Scott Lahteine
b8b7ef1902 Merge pull request #7090 from thinkyhead/bf_italian_refix
Fix Italian language mapper
2017-06-19 09:27:13 -05:00
Scott Lahteine
42f7f9e013 Merge pull request #7060 from bgort/i2cpefix
I2C Position Encoders Example Configs
2017-06-19 01:08:42 -05:00
Scott Lahteine
0b49bddec2 Fix Italian language mapper 2017-06-19 01:01:40 -05:00
Silvio Didonna
2e26a7c752 Added missing Italian translations 2017-06-18 23:37:48 -05:00
Scott Lahteine
4c3dc8bf07 Remove set_current_to_destination from resume_print
Addressing #7057
2017-06-18 23:01:13 -05:00
Scott Lahteine
4857a3ba48 Formatting and spelling 2017-06-18 23:01:12 -05:00
Thomas Moore
3d24c329af M600 fixes 2017-06-18 23:00:56 -05:00
Bob-the-Kuhn
8fb30aaed6 warn user of an invalid combination 2017-06-17 15:04:47 -05:00
Bob-the-Kuhn
6cb9bb27fe Move lcd_refresh_zprobe_zoffset definition 2017-06-16 21:46:33 -05:00
Scott Lahteine
d4270f15a9 Spacing tweak in setup() 2017-06-16 14:21:05 -05:00
Scott Lahteine
c61c0a9aeb Fix status message missing "blink" 2017-06-16 14:18:19 -05:00
Scott Lahteine
062131554f Followup to #7045 2017-06-16 14:18:19 -05:00
Jim Brown
3d043976f7 Add option to disallow filament change without homing first 2017-06-16 13:32:17 -05:00
Scott Lahteine
93da4e83f7 One more space on a short status message 2017-06-16 12:58:25 -05:00
Scott Lahteine
7c95f762f2 Show LCD bed options even without thermal protection 2017-06-15 15:29:56 -05:00
Scott Lahteine
92eb55f246 Reject generous donation of trailing whitespace 2017-06-15 15:25:24 -05:00
Scott Lahteine
428be27893 Formatting adjustments 2017-06-15 15:25:24 -05:00
Scott Lahteine
8d5a37fb3d Support for a 5th stepper in stepper code 2017-06-15 15:25:23 -05:00
Scott Lahteine
7769a22064 Tweaks to temperature code 2017-06-15 15:25:23 -05:00
Scott Lahteine
d9da126776 Cleanups for UBL / ultralcd.cpp 2017-06-15 15:22:36 -05:00
Scott Lahteine
499d5c3b24 Fix scrolling lcd message for DOGM 2017-06-15 15:07:39 -05:00
Scott Lahteine
7164fd499e Tweak to G33 P error 2017-06-15 14:43:40 -05:00
Scott Lahteine
c10d763d98 Simpler prepare move conditions 2017-06-15 14:43:40 -05:00
Scott Lahteine
4ebff8eaa5 Drop fastio timer cruft 2017-06-15 14:43:40 -05:00
Scott Lahteine
09bc34f4dc Allow arbitrarily long retraction 2017-06-15 14:43:30 -05:00
Scott Lahteine
4414825e0d Merge pull request #7038 from thinkyhead/bf_PCA9632
PCA9632 PWM color LED support
2017-06-15 14:41:24 -05:00
Bob-the-Kuhn
9dda022705 fix compile errors
================================

Changed to conditional compile for AT90USB issue
2017-06-15 13:18:14 -05:00
Bob-the-Kuhn
b3338ccb01 Merge pull request #6954 from Bob-the-Kuhn/Software-SPI-for-all-CPUs
SD card soft SPI - allow all CPU families to use it
2017-06-15 01:03:39 -05:00
Brian
40bb0cbf7a example configurations, etc. 2017-06-14 18:04:28 -04:00
Jim Brown
26d20ebcfc Don't allow filament change without homing first (#7054) 2017-06-13 17:11:37 -05:00
Roxy-3D
824f71d503 LCD Panel Interactive Mesh Editing (#7045)
Original Mesh Bed Leveling replacement put at top of UBL Menu Options to
help facilitate the removal of the Original Mesh Bed Leveling.

Radar display (and control) of the UBL Interactive Mesh Editing.
2017-06-12 18:26:49 -05:00
Scott Lahteine
445227c807 Fix missing LCD_STR_REFRESH 2017-06-12 01:28:52 -05:00
Scott Lahteine
699aa35df6 Code cleanup for G33 2017-06-12 01:25:40 -05:00
dot-bob
0bc66bf22c PCA9632 PWM color LED support
Add support for the PCA9632 PWM color LED driver used on the Ultimaker 2 and Wanhao Duplicator 6.
2017-06-12 01:09:24 -05:00
Luc Van Daele
896dfa0577 G33 eccentric probe fixes (#6850)
* excentric probe config fix

* undo last commit

* eccentric probe fix

* oops

* !stow after each probe

* deploy/stow fix

* E parameter + bit of cleanup

* comment

* LCD menu fix
2017-06-12 01:07:19 -05:00
Thomas Moore
e47029199e Remove ADVANCED_PAUSE_FEATURE requirement for PROBING_HEATERS_OFF (#7000)
* Remove ADVANCED_PAUSE_FEATURE requirement for PROBING_HEATERS_OFF

* Add HEATER_IDLE_HANDLER conditional
2017-06-12 00:22:31 -05:00
Scott Lahteine
8326c1c279 Merge pull request #7005 from Diederikvanderpant/bugfix-1.1.x
added shift register pins for reprapworld keypad v1.1
2017-06-11 23:12:11 -05:00
Scott Lahteine
07f8da36d2 CL-260 configs 2017-06-11 19:40:13 -05:00
Scott Lahteine
dce665a083 Merge pull request #7025 from magnuspub/patch-1
Mod in language_it.h
2017-06-11 19:09:46 -05:00
Scott Lahteine
7b09ab6bda Merge pull request #7033 from Bob-the-Kuhn/pinsDebug-&-dac_mcp4728-fixes
Fix pinsDebug problem & add capability to display more than 70 pins
2017-06-11 19:09:09 -05:00
Scott Lahteine
5bdb4bbc5e Merge pull request #7030 from thinkyhead/bf_circular_scroll
Circular scrolling of the status message
2017-06-11 19:07:38 -05:00
Federico
772275ab0c Create language_it.h 2017-06-11 10:37:34 +02:00
Bob-the-Kuhn
11e28f389e fix pinsDebug.h error, add capability to display more than 70 pins. 2017-06-10 22:01:15 -05:00
Scott Lahteine
21217d53df Circular scrolling of the status message 2017-06-10 20:56:00 -05:00
Scott Lahteine
da8e946efb Reduce size of heater state print code 2017-06-10 20:26:17 -05:00
Scott Lahteine
dde8bb7c8b Fix extrude_min_temp compiler warning 2017-06-10 20:07:36 -05:00
Scott Lahteine
83263076dc Merge pull request #7014 from fiveangle/fix_get-set_DrvPct_declarations
fix get/setDrvPct declarations
2017-06-10 19:06:50 -05:00
Scott Lahteine
57a51fd5db Tweak some else clauses 2017-06-10 16:40:10 -05:00
Scott Lahteine
fc89de6d8b Followup to German language update 2017-06-10 16:27:39 -05:00
Federico
92011e3d8c Create language_it.h 2017-06-10 21:50:14 +02:00
Dave Johnson
7864b133a8 Fix get/setDrvPct declarations 2017-06-09 20:21:28 -07:00
Scott Lahteine
0b6b7c9c7e Merge pull request #7013 from thinkyhead/bf_german_update
Update language_de.h
2017-06-09 21:41:19 -05:00
Scott Lahteine
f17a3c2474 Merge pull request #6889 from thinkyhead/bf_at90usb_mapping
Unify all AVR90USB pin mappings
2017-06-09 21:00:13 -05:00
Kai
5a72b6818e update language_de.h
Following #6990 some more translations and some grammar fixes
2017-06-09 19:45:09 -05:00
Scott Lahteine
4cc5444144 Merge pull request #7008 from Bob-the-Kuhn/Z_MIN_PROBE_ENDSTOP-and-Z_MAX_PIN
Can't use "#define Z_MIN_PROBE_PIN Z_MAX_PIN" in configuration.h
2017-06-09 19:42:56 -05:00
Scott Lahteine
51bc50214a Save 8 bytes of SRAM 2017-06-09 19:20:16 -05:00
Scott Lahteine
748bf32388 Unify AVR90USB: pinsDebug changes 2017-06-09 19:20:16 -05:00
Scott Lahteine
5426fc1735 Unify AVR90USB: Pins cleanup 2017-06-09 18:48:12 -05:00
Scott Lahteine
87d8223251 Unify AVR90USB: Pins remap to Arduino 2017-06-09 18:48:12 -05:00
Scott Lahteine
b378deaf89 Unify AVR90USB: fastio changes 2017-06-09 18:21:57 -05:00
Scott Lahteine
e94f79ccea Patch some serial macros 2017-06-09 17:17:23 -05:00
Scott Lahteine
d91710e9aa Followup for UBL translated strings 2017-06-09 16:59:26 -05:00
Scott Lahteine
761df686bd Minor cleanup in gcode.h 2017-06-09 16:59:26 -05:00
Thomas Moore
897bc2ac1f Updates for ensure_safe_temperature (#6963)
* Updates for ensure_safe_temperature

* M600 fixes
2017-06-09 15:19:08 -05:00
Bob-the-Kuhn
1c107b3949 delete problem line 2017-06-09 11:53:36 -05:00
Diederik van der Pant
5b270417ed added shift register pins for reprapworld keypad v1.1
I recently upgraded my Marlin to V1.1.x and decided to publish my fix to make marlin compile properly when #define board megatronics 2 in combination with #define reprapworld keypad v1.1. It was previously described in the comments of a closed pull request. MarlinFirmware#472. All the buttons on the keypad are now operational.
2017-06-09 14:17:47 +02:00
bgort
2f55870edb [New Feature] I2C position encoder support (#6946)
* [New Feature] I2C position encoder support

I plan to continue improving/cleaning this up, as there areas that need work.

* let the cleanups begin.

* progress

* more progress

* comments, rename files, etc.

* clean

* Cleanups per thinkyhead

* a few more cleanups

* cleanups, bugfixes, etc.

* remove unnecessary passes_test(), additional cleanups/optimizations

* cleanups

* misc.

* Fix up I2CPEM.init() and a few other things.

* organize, fix, rename, etc.

* more optimization

* a few more tweaks
2017-06-09 08:06:23 -04:00
Bob-the-Kuhn
28d72f48f1 change to DWORD 2017-06-08 16:15:02 -05:00
Bob-the-Kuhn
8d1d9040b6 add static 2017-06-08 14:59:21 -05:00
Bob-the-Kuhn
a17ffe1ece Merge pull request #6985 from Kaibob2/patch-1
Fix for #6980 (case_light compile problem when EXTENDED_CAPABILITIES_REPORT is enabled)
2017-06-08 11:18:56 -05:00
Tannoo
731c8e6372 Translatable Strings for ubl_G29 (#6990) 2017-06-08 10:09:39 -05:00
Kai
abb6b8ad54 update language_de.h (#6986)
There was quite a lot to translate this time. I'm not absolutely confident with the whole UBL stuff and it's a PITA to translate. I don't use any kind of levelling myself as i just have a perfectly level cast aluminium plate as bed.
So maybe someone who really uses it might take a closer look at it after it's merged.
2017-06-08 10:04:52 -05:00
Kai
c2eff60d3f Fix for #6980
Line 7830 prevented successfull compilation when #define CASE_LIGHT_ENABLE is uncommented
2017-06-08 09:19:04 +02:00
Scott Lahteine
1419126721 Merge pull request #6965 from thinkyhead/bf_save_more_sram
Use createChar_P to save SRAM in bootscreen
2017-06-07 17:34:19 -05:00
Scott Lahteine
a453be7357 Merge pull request #6973 from bgort/autoreportT
Enable AUTO_REPORT_TEMPERATURES by default
2017-06-07 17:33:40 -05:00
Scott Lahteine
1d615e0a67 Merge pull request #6976 from Tannoo/Leveling_in_About_Printer
Leveling type in About Printer
2017-06-07 17:26:21 -05:00
Scott Lahteine
707707d71a Fix LCD status message padding 2017-06-07 16:07:38 -05:00
Scott Lahteine
e556ab1dff Find three-point leveling points on Delta 2017-06-07 16:07:38 -05:00
Scott Lahteine
a27b08e6af Various code style tweaks 2017-06-07 16:07:38 -05:00
Scott Lahteine
dac29e0f75 Cleaner failure of UBL without EEPROM 2017-06-07 16:07:38 -05:00
Scott Lahteine
9128d9ab45 Improve sanity checks with static_assert, organize 2017-06-07 16:07:38 -05:00
Scott Lahteine
6bb05c4543 Save 20b in smart_fill_mesh with PROGMEM 2017-06-07 16:07:38 -05:00
Scott Lahteine
b7dc4d9973 Save 92b PROGMEM, 14b SRAM with extruder auto fan 2017-06-07 16:07:38 -05:00
Scott Lahteine
c9e3caf928 Save lots of PROGMEM, ~20b SRAM with DIGIPOT_I2C 2017-06-07 16:07:38 -05:00
Scott Lahteine
4134a6b526 Save 88b PROGMEM, 48 bytes SRAM in settings.reset 2017-06-07 16:07:38 -05:00
Scott Lahteine
36cc03a9b4 Save 224b PROGMEM, 48b SRAM in get_homing_bump_feedrate 2017-06-07 16:07:38 -05:00
Scott Lahteine
2a41f0ff84 Save 28b PROGMEM in ultralcd.cpp (line_to_current) 2017-06-07 16:07:38 -05:00
Scott Lahteine
e6d10f6ddd Spend 48b PROGMEM to save 16b SRAM
...by moving `homing_feedrate_mm_s` to PROGMEM.
2017-06-07 16:07:38 -05:00
Scott Lahteine
97e13a30ba Save over 100 bytes SRAM in pin_is_protected 2017-06-07 16:07:38 -05:00
Scott Lahteine
45c74406cf Recover 32 bytes of SRAM in Marlin bootscreen code 2017-06-07 16:07:38 -05:00
Scott Lahteine
e1c5a43247 Cleanup stepper current control config options 2017-06-07 16:07:38 -05:00
Scott Lahteine
efc198f952 Spacing, const, comments 2017-06-07 16:07:38 -05:00
Scott Lahteine
4406fba994 Fixes #6975 2017-06-07 11:14:30 -05:00
Scott Lahteine
d28f5d8a78 Fix: z_endstop_adj is never initialized 2017-06-07 10:29:56 -05:00
Scott Lahteine
5d5ff36446 Fix a compile error with _lcd_set_z_fade_height 2017-06-07 10:29:56 -05:00
Tannoo
b88957e0d4 Leveling type in About Printer
Show the Leveling system in use on the About Printer screen.
2017-06-07 06:28:33 -06:00
Brian
dd071a4a65 Enable AUTO_REPORT_TEMPERATURES by default 2017-06-07 02:52:35 -04:00
bgort
8db1197c9b Enable extended capabilities report by default (#6969)
Ref #5139
2017-06-07 02:36:34 -04:00
bgort
82e662fc69 Remove requirement for LCD when UBL is used. (#6971)
* Remove requirement for LCD when UBL is used.

* fix previous oversights

* further refinement - error messages for P2 & P4

* require R on G26 when not using LCD; default to all points
2017-06-07 02:24:36 -04:00
Tannoo
2c2b991b59 UBL Manual Build Menu Option (#6972)
One click option to manually build UBL mesh.
2017-06-06 22:14:18 -05:00
Roxy-3D
0dd0033b33 Save up to 94 bytes of RAM on 20x4 LCD Display machines (#6964)
* Save up to 94 bytes of RAM on 20x4 LCD Display machines

Moved the custom screen characters out of RAM into Program Memory.  With
SD-Card support and the Progress Bar enabled, this saves 94 bytes of RAM
memory.

This was tested using the example_configurations/FolgerTech-i3-2020
files.  So a couple small changes to those files snuck into this Pull
Request.

Probably...  We can find similar savings in the Graphics LCD code it we
comb through it.   And if so...  That is the place we really need to
save RAM memory!

* Tidy up white space and indentation
2017-06-05 17:02:00 -05:00
Bob-the-Kuhn
ba0bd33c38 Removed check for 2560 family 2017-06-04 22:16:27 -05:00
Scott Lahteine
04b07a6ecc Unused var in Stepper 2017-06-04 17:25:16 -05:00
Scott Lahteine
eb8af486d2 Ensure safe temperature for M600 2017-06-04 17:25:16 -05:00
Scott Lahteine
bfe7fbe5c0 Maintain message scroll rate 2017-06-04 17:25:15 -05:00
Scott Lahteine
6411d65c48 Fix Morgan SCARA S2 calculation 2017-06-04 12:24:09 -05:00
Scott Lahteine
46752588b9 Merge pull request #6948 from Bob-the-Kuhn/redundant_temperature
fix redefinition errors for redundant_temperature
2017-06-04 12:16:09 -05:00
Scott Lahteine
5938dae200 Merge pull request #6950 from MagoKimbra/fix_g29_3_point
Fix G29 with 3 point
2017-06-04 12:15:44 -05:00
Scott Lahteine
c5e0f08e35 Merge pull request #6951 from fixoid/patch-4
Initializing extruder/nozzle servo when turning on the printer
2017-06-04 12:13:05 -05:00
Scott Lahteine
e4937b0285 Cleanup of spacing and formatting 2017-06-04 11:31:43 -05:00
fixoid
1aab9906e6 Initializing extruder/nozzle servo when when turning on the printer 2017-06-04 16:57:24 +03:00
MagoKimbra
663ff7f92a Fix G29 with 3 point 2017-06-04 14:39:31 +02:00
oldmcg
9f295581f0 Ubl delta fixes and improvements (#6941)
* Change all direct changes of ubl.state.active to
  set_bed_leveling_enabled() which handles apply/unapply
  leveling to maintain current_position consistency.

Fix invalidation of UBL mesh to invalid unreachable
  mesh points as well (delta corners).

Fix UBL_DELTA unapply_leveling logic and when
it gets applied, including fade_height changes.

Add optional M114 D for detailed position information,
disabled from compilation by default (M114_DETAIL).

* UBL_DELTA raw and inline kinematics

* UBL planner fall through fix

* consistent variable names

* Cleanup orphaned code and whitespace changes.
Use _O2.

* compile warnings cleanup

* Remove redundant #ifdef condition
2017-06-03 17:11:43 -05:00
Bob-the-Kuhn
c34d7a29a6 fix redefinition errors for redundant_temperature
Removing redundant_temperature from public section and leaving it in the
private section
2017-06-03 16:40:14 -05:00
Bob-the-Kuhn
6a5d3b580d fix "hex_address not defined" when UBL is enabled 2017-06-03 13:19:55 -05:00
Scott Lahteine
789b2928a8 Tweak scrolling message code 2017-06-02 23:45:53 -05:00
Scott Lahteine
fc7d7f87b4 Init probe test pin with FastIO 2017-06-02 23:45:52 -05:00
Scott Lahteine
0282452cea Make Parser::seen volatile 2017-06-02 23:45:52 -05:00
Scott Lahteine
9a305a467b Patch LCD Contrast menu item 2017-06-02 23:45:52 -05:00
Scott Lahteine
90ccac4bcf Clean up after recent commits 2017-06-02 23:45:52 -05:00
Bob-the-Kuhn
2130f10de8 allow space between parameter and value 2017-06-02 19:57:22 -05:00
Bob-the-Kuhn
ebda4663c3 for discusion 2017-06-02 19:42:43 -05:00
FATALHERMIT
911079104e Support for ZRIB v2.0 Control Board 2017-06-02 12:05:46 -05:00
Scott Lahteine
65a0212866 Easier override of FILWIDTH_PIN 2017-06-02 12:05:46 -05:00
Scott Lahteine
147d9d76fc Merge pull request #6928 from Bob-the-Kuhn/Fix-case-light-logic-on-Azteeg-X3-boards
Fix case light logic on Azteeg_X3 boards.
2017-06-01 20:14:15 -05:00
guntherv73
4288c4fb4f Configurations for Malyan M150 2017-06-01 19:26:29 -05:00
Scott Lahteine
1919cb0d1e Config cleanups 2017-06-01 19:26:16 -05:00
Bob-the-Kuhn
9a9bbfc57c Fix case light logic on Azteeg_X3 boards. 2017-06-01 12:33:24 -05:00
Thomas Moore
a32f7b329c Fix heater status display for advanced pause 2017-06-01 12:29:47 -05:00
Scott Lahteine
445865ea03 REPRAPWORLD_KEYPAD is NEWPANEL but not ULTIPANEL 2017-05-31 23:48:03 -05:00
Scott Lahteine
4296a8b74e For status scrolling, pad a short message 2017-05-31 23:48:03 -05:00
Scott Lahteine
4a96433b7e Simplify counting of printable characters 2017-05-31 23:45:41 -05:00
Scott Lahteine
8d69394ae1 Fix LCD printing of progmem strings 2017-05-31 23:36:57 -05:00
Scott Lahteine
c74d4dede6 Prevent illegal leveling combinations
Addressing issue #6901
2017-05-31 23:36:57 -05:00
Scott Lahteine
155aa62fb0 Merge pull request #6912 from thinkyhead/bf_better_pulse_delay
Account for dual XYZ in pulse delay cycles estimate
2017-05-31 22:21:47 -05:00
Scott Lahteine
a5fa586642 Preferred patch to gcode.h 2017-05-31 21:18:16 -05:00
Bob-the-Kuhn
1b41e1f645 another compile error
only seen if

#if ENABLED(TEMPERATURE_UNITS_SUPPORT)
      ...
    #if
ENABLED(ULTIPANEL) && DISABLED(DISABLE_M503)
2017-05-31 13:59:49 -05:00
Bob-the-Kuhn
65bd4c8c94 Merge pull request #6797 from Bob-the-Kuhn/M355-case-lightimprovements-(1.1.x)
M355 case light improvements (replaces PR #5685)
2017-05-31 13:33:59 -05:00
Bob-the-Kuhn
9657e7d3ee copied file changes from PR #5685
==============================

Configuration_adv.h changes

==============================

add "live" LCD update

==============================

P & S version

==============================

final (hopefully) tested version

==============================

update M115 capabilities print

==============================

Menu changes portion of the requested changes

==============================

changed USEABLE_HARDWARE_PWM from a function to a series of macros

==============================

changes per review
2017-05-31 13:22:38 -05:00
Bob-the-Kuhn
8206bb9bb9 fix compile error
invalid conversion from 'const char*' to 'char*' [-fpermissive]
2017-05-31 13:17:01 -05:00
Scott Lahteine
df91346188 Account for dual XYZ in pulse delay cycles estimate 2017-05-31 12:23:28 -05:00
Scott Lahteine
7236109f2a Patch M24 / M125 for delta 2017-05-30 23:07:29 -05:00
Scott Lahteine
be17033762 Fix case light menu toggle 2017-05-30 14:03:45 -05:00
Scott Lahteine
89b93058e3 Merge pull request #6887 from christianh17/PR-sanitycheck
enable DEACTIVATE_SERVOS_AFTER_MOVE with switching nozzle
2017-05-30 13:43:39 -05:00
Scott Lahteine
05b66234ae Merge pull request #6895 from thinkyhead/bf_user_commands
Custom user commands menu
2017-05-30 13:40:50 -05:00
Scott Lahteine
84a0a77c59 Merge pull request #6852 from tcm0116/mixing_extruder_lin_advance
Generate error if MIXING_EXTRUDER and LIN_ADVANCE are both enabled
2017-05-30 13:37:51 -05:00
Scott Lahteine
266ae8912a Formatting in _draw_heater_status 2017-05-30 03:32:16 -05:00
Scott Lahteine
6b9ca16f36 Patch lcd_print edge limit code 2017-05-30 03:32:15 -05:00
Tannoo
74d6dee920 User Command (Script) Menu
The menu (commands / scripts) is configurable in `Configuration_adv.h`.

- Added conditionals.
- Changed script handling.
- Slimmed and working!
- Added Status message.
- Returning to lcd status screen now!
- Example Configs Updated.
- Cleanups by @thinkyhead
2017-05-30 02:33:57 -05:00
Scott Lahteine
d9c8072037 Edit PROPORTIONAL_FONT_RATIO comment 2017-05-30 01:29:39 -05:00
Scott Lahteine
46b32e4548 Cleanup LCD interface, add lcd_reset_status 2017-05-29 22:16:13 -05:00
Scott Lahteine
ca99d67ede Fix UBL "Info screen" menu items 2017-05-29 19:55:26 -05:00
Scott Lahteine
2c7a39bc0e Fix LCD print aborted message 2017-05-29 19:52:01 -05:00
Scott Lahteine
0f1e8c195d Draw on LCD after value has changed 2017-05-29 19:42:30 -05:00
Scott Lahteine
51587c4b43 Rename Feedrate to Velocity to match prior naming 2017-05-29 17:54:15 -05:00
Scott Lahteine
9677f3f2f5 Patch up LCD Bed Leveling menu 2017-05-29 17:51:11 -05:00
Scott Lahteine
fc2eaab7f3 Show home option in level bed menu 2017-05-29 17:51:10 -05:00
Scott Lahteine
c6a7adc293 Patch G29 A and Q arguments to bypass setup 2017-05-29 17:51:10 -05:00
Scott Lahteine
4cece2d72e Use NAN for G29 W omitted parameters 2017-05-29 17:51:10 -05:00
Scott Lahteine
2d71569138 Fix spacing in JSON output 2017-05-29 17:51:10 -05:00
Scott Lahteine
b2d3c8aedd Have G28 do a refresh of the display 2017-05-29 17:51:10 -05:00
Scott Lahteine
50ab9c2e04 General cleanup of spacing, comments 2017-05-29 15:34:14 -05:00
Scott Lahteine
f1e33afda4 Return to Bed Leveling menu when done 2017-05-29 15:31:02 -05:00
Scott Lahteine
78d8c598e1 Fix lcd_synchronize with message 2017-05-29 15:31:02 -05:00
Scott Lahteine
eb39d6e3e2 Don't draw progress bar until it has 1% 2017-05-29 15:31:01 -05:00
Scott Lahteine
194f8b2f55 Start at Z=0 in manual probing 2017-05-29 15:31:01 -05:00
Scott Lahteine
6f89db11f0 Allow lcd_setstatusPGM to reset the alert level 2017-05-29 15:31:00 -05:00
Scott Lahteine
3fe333143c Case light as a toggle menu item 2017-05-28 14:32:07 -05:00
Scott Lahteine
d013bddfa8 Merge pull request #6876 from thinkyhead/bf_extend_leveling_menu
Extend the ABL/MBL Bed Leveling menu
2017-05-28 14:19:02 -05:00
Scott Lahteine
01e7e234c6 Add more options to the Bed Leveling menu 2017-05-28 14:04:28 -05:00
Scott Lahteine
0cbe448edf Split up Control > Motion submenu 2017-05-28 12:52:24 -05:00
Scott Lahteine
a3645ec921 Reference op with variable name 2017-05-28 11:33:22 -05:00
Scott Lahteine
71367fd518 Scrolling status message option 2017-05-28 11:26:28 -05:00
Scott Lahteine
b0eae68f57 Prevent bed temperature being set too high 2017-05-28 11:11:17 -05:00
Scott Lahteine
493f0b0c62 Fix some compiler warnings 2017-05-28 11:06:33 -05:00
christianh17
f379a326cc enable DEACTIVATE_SERVOS_AFTER_MOVE with switching nozzle
When using switching nozzle it should be possible to disable the servo after move. Do it only if you do not need the servo power to keep the position.
2017-05-28 15:33:28 +02:00
Scott Lahteine
33279a1e02 Code style tweak to gcode.h 2017-05-27 19:47:26 -05:00
Ernesto Martinez
ac959b12ee Updates to language_es.h based on latest updates. (#6871)
Spanish language updates
2017-05-27 19:08:39 -05:00
Scott Lahteine
55c700d537 Tweak to gcode.h 2017-05-26 22:11:31 -05:00
Bob-the-Kuhn
868e7db4ae value check was looking at the code 2017-05-26 14:49:42 -05:00
Thomas Moore
fb5e0ffe16 Unify M600 and M125 pause features (#6407)
* Unify M600 and M125 pause features
* Cleanup per thinkyhead's comments
* Rename filament_change_menu_response to advanced_pause_menu_response
* Include HAS_BED_PROBE in QUIET_PROBING
* Update gMax example file
* is_idle() is out of scope without the braces
* Convert FT-i3-2020 to Advance Pause names...
* Allow pause even if not printing
2017-05-26 13:01:02 -05:00
Scott Lahteine
b3a97b5013 Patch up LCD level bed menus 2017-05-25 23:53:31 -05:00
Scott Lahteine
78af2b1444 Fix PROBE_MANUALLY via G-code 2017-05-25 23:53:31 -05:00
Scott Lahteine
082da23391 One fewer EOL in M503 output 2017-05-25 23:53:31 -05:00
Scott Lahteine
b15e531464 Fix screen change on character display 2017-05-25 15:29:14 -05:00
Thomas Moore
44e657766e Add incompatibility error to Sanity Check for MIXING_EXTRUDER and LIN_ADVANCE 2017-05-25 08:06:27 -05:00
Scott Lahteine
735405b2a4 Merge pull request #6848 from thinkyhead/bf_scara_M665
Add M665 for SCARA
2017-05-24 20:51:51 -05:00
Scott Lahteine
ffa901f373 Merge pull request #6839 from thinkyhead/bf_day_ending_in_y
UBL ultralcd.cpp patches
2017-05-24 17:55:44 -05:00
Scott Lahteine
361cbba113 Use M665 to set SCARA angle offsets 2017-05-24 17:49:24 -05:00
Scott Lahteine
5ed63a5724 Apply const in prepare_kinematic_move_to 2017-05-24 17:49:24 -05:00
Scott Lahteine
5cbe0244c5 Fixes for spindle/laser and SCARA probe bounds 2017-05-24 17:49:23 -05:00
Scott Lahteine
1f52c9f5df Neater Megatronics 3 pins 2017-05-24 17:49:23 -05:00
Scott Lahteine
af81cb4cbb Patch for M503 output 2017-05-24 17:49:09 -05:00
Scott Lahteine
1d167a6874 Some cleanup, fixes for ultralcd.cpp UBL code
- Free up 30 bytes of SRAM in UBL LCD code
- Fix BUILD_ABS_MESH temperature
- Fix UBL indentation in ultralcd.cpp
- UBL vars lowercase, "convert to positive" sensibly
2017-05-24 01:10:42 -05:00
Scott Lahteine
f4028fe088 New GCode Parser - Implementation 2017-05-23 14:15:10 -05:00
Scott Lahteine
002a06c507 New GCode Parser - Configuration 2017-05-23 14:15:07 -05:00
Scott Lahteine
ad915b667e One more mesh_index_to_npos update
Followup to #6827
2017-05-23 13:02:50 -05:00
Scott Lahteine
2881f0a48d Fix, extend G42 with P (probe) parameter
- Also fix handling of SCARA and misuse of `codenum`.
2017-05-23 04:55:42 -05:00
Scott Lahteine
d252d1b6a2 Merge pull request #6831 from thinkyhead/bf_move_g7
Move G7 to G42
2017-05-23 03:02:57 -05:00
Brian
82ca6248e2 Move G7 to G42
See: #6777
2017-05-22 23:21:35 -05:00
Scott Lahteine
26ffa558a3 Use redraw flag for both types of LCD 2017-05-22 18:34:54 -05:00
Scott Lahteine
3ff7515527 Merge pull request #6817 from cbusillo/patch-1
missing enable for M605 for duplication mode
2017-05-22 18:07:11 -05:00
Scott Lahteine
34cfbc90cd Use new attribute macros in more places 2017-05-22 17:38:58 -05:00
Scott Lahteine
85b967657e Embed G26/G29 in ubl class, with enhancements 2017-05-22 17:38:58 -05:00
Scott Lahteine
c99bd69889 Apply const float & more 2017-05-22 17:38:36 -05:00
Scott Lahteine
ad5638f78c Cleanup some fastio code 2017-05-22 17:38:36 -05:00
Scott Lahteine
e271521c39 Single user_canceled function in G26 2017-05-22 17:38:36 -05:00
Scott Lahteine
c2ea22da49 Clean up whitespace 2017-05-22 17:38:36 -05:00
Scott Lahteine
ceb62fc7e1 Fixes #6828: M428 bug 2017-05-22 17:34:03 -05:00
oldmcg
48f7652143 UBL G29 -P3.1 smart fill (#6823)
* UBL G29 -P3.1 mesh fill with distance-weighted least squares fit.

* Back to original -O0 on G29 for now.
2017-05-22 12:33:50 -05:00
Scott Lahteine
850203fb3a Merge pull request #6816 from thinkyhead/bf_lcd_live_editing
Constrain LCD status message rendering
2017-05-22 11:15:35 -05:00
Roxy-3D
3129260c44 Misc. Clean Up (#6822)
* Misc. Clean Up

Mostly UBL related clean up.
- But fixed a bug in the thermistortables.
- Made G26 more responsive to user aborts.
- Added sanity checks for older name for UBL_MESH_VALIDATION.
- Made G29 P4 able to edit invalidated mesh points
- Restore a reasonable Fade Height for UBL when creating new state information
- Get UBL's Topology Map to look a little bit better
- Make sure the user doesn't see a blank screen when doing Mesh Editing.

* Huh???   GitHub Desktop screwed up!

* get the planner object in scope

* Fix out of scope z_fade_height

* Travis timed out...

I need a change so I can force a new commit and sync.
2017-05-21 22:09:51 -05:00
cbusillo
3b4116e73b missing enable for M605 for duplication mode
I believe gcode_M605 will not be called when using DUAL_NOZZLE_DUPLICATION_MODE without this change.
2017-05-21 13:54:20 -04:00
Scott Lahteine
5e8892d6b5 Show Restore Failsafe item with EEPROM off 2017-05-21 12:52:44 -05:00
Scott Lahteine
76af9ac7c5 tweaks 2017-05-21 12:51:58 -05:00
Scott Lahteine
ba5910ab6c Constrain LCD status message rendering 2017-05-21 12:35:16 -05:00
MagoKimbra
2c309a8f7c Fix set_lcd_contrast 2017-05-21 19:01:44 +02:00
Scott Lahteine
22dbb2117c Merge pull request #6812 from thinkyhead/bf_day_ending_in_y
Cleanup code, organize & document fastio pin mappings
2017-05-21 11:39:04 -05:00
Roxy-3D
364f8fb613 Update Configuration.h files to better names (#6814)
Changed UBL_G26_MESH_EDITING to UBL_G26_MESH_VALIDATION
Added UBL_MESH_EDIT_MOVES_Z to prepare for that change (coming next)
2017-05-21 11:10:22 -05:00
Scott Lahteine
d7fda2fe49 Formatting, const in G33 2017-05-21 10:40:05 -05:00
Scott Lahteine
1519b0e7c1 Split up fastio.h, document pin mappings 2017-05-21 10:33:27 -05:00
Scott Lahteine
49599caade General cleanup to utf_mapper.h 2017-05-21 10:33:27 -05:00
Scott Lahteine
02f15f6775 UBL-related cleanup, spacing, standards
Reference: #6804
2017-05-21 10:33:26 -05:00
Scott Lahteine
52e20aeab3 Pins-related cleanup, formatting 2017-05-21 07:18:03 -05:00
Scott Lahteine
ea906e4da7 Merge pull request #6810 from thinkyhead/bf_lcd_live_editing
Add "live editing" option to LCD menus
2017-05-21 06:11:52 -05:00
Scott Lahteine
11fc9564c9 Add live editing option to LCD menu 2017-05-21 05:29:46 -05:00
Scott Lahteine
8a0a5cfccc Temp-related cosmetic changes 2017-05-21 04:49:25 -05:00
Scott Lahteine
b29dbbd5e4 Use uint16_t for temps 2017-05-21 04:48:53 -05:00
Scott Lahteine
ebcd1aaf88 Access hotend/bed temperatures as float 2017-05-21 04:46:31 -05:00
Scott Lahteine
6ce2b1ff4a G33 evolutionary changes 2017-05-20 19:23:39 -05:00
Scott Lahteine
3c061a9f9a UBL tabs, whitespace, spelling, etc. 2017-05-19 14:16:50 -05:00
Scott Lahteine
75badae2f8 Disable PROBE_MANUALLY for UBL
Plus some other UBL tweaks.
2017-05-19 07:13:18 -05:00
Scott Lahteine
94a4af1d7f Merge pull request #6773 from thinkyhead/bf_lcd_patch_e5
Patch LCD code for 5th extruder
2017-05-18 15:26:55 -05:00
Brian
01f452c37c Tweak Azteeg X3 PRO _pins.h so Viki2 will work for those without a case light.
- add comment explaining that the Panucatt Viki2 wiring diagram uses pin 44
2017-05-18 13:00:13 -04:00
Brian
e09b4ce4a5 Add checking 2017-05-17 19:46:16 -04:00
Brian
13599a73c7 Add G7 gcode command to move between UBL mesh points
- can be augmented in the future to enable for other leveling systems

Quite simple, but did not want to modify `G1` as the additional checking would slow it down.

Tested & working.
2017-05-17 19:05:36 -04:00
Brian
43c24f0027 Fix recent regressions, &c.
- fix broken `M421` due to less-than-careful optimization
- add HOME_AFTER_DEACTIVATE define to advanced config so not everyone has to rehome after steppers are deactivated
- misc. cleanups (remove unused label, unused variables)
2017-05-17 17:21:46 -04:00
Scott Lahteine
3843a5151a Patch LCD code for 5th extruder, EEPROM reset 2017-05-17 15:33:51 -05:00
Scott Lahteine
6c064bb7d6 Some probe_pt error-handling 2017-05-17 15:33:51 -05:00
Brian
3370329751 Fix broken EEPROM save/load 2017-05-17 12:41:27 -04:00
Scott Lahteine
f0fe26c411 Ensure Arduino.h and configs are included for serial.cpp 2017-05-17 05:07:35 -05:00
Scott Lahteine
ffb5353294 Merge pull request #6738 from thinkyhead/bf_config_crc_rebase
Implement CRC16, develop mesh allocation table
2017-05-17 04:44:00 -05:00
Scott Lahteine
e806e6419a Merge pull request #6768 from thinkyhead/rc_spindle_m3_m5
Spindle / Laser support
2017-05-17 04:39:32 -05:00
Scott Lahteine
d6f49c6626 Merge pull request #6752 from jdelahayes/bugfix-1.1.x
Update french language
2017-05-17 04:32:28 -05:00
Scott Lahteine
55a87da036 SPINDLE/LASER implementation 2017-05-17 04:26:15 -05:00
Scott Lahteine
ffe0e2d19a SPINDLE/LASER pins changes 2017-05-17 04:23:06 -05:00
Scott Lahteine
99c4900a98 SPINDLE/LASER config changes 2017-05-17 04:23:06 -05:00
Scott Lahteine
a3abfeac47 Mark strings needing translation 2017-05-17 03:49:33 -05:00
Scott Lahteine
7f4e4b1212 UBL name/state methods 2017-05-17 03:49:32 -05:00
Brian
7852369987 Implement CRC16, develop mesh allocation table
- Add crc16 utility function
 - Implement CRC16 for config store, remove old checksum, increment layout version
 - Move UBL mesh store/load to MarlinSettings; increment UBL_VERSION
 - Begin to lay out MAT structure, prototype functions, etc.
 - Rename ubl.state.eeprom_storage_slot to .storage_slot
 - Misc. optimization
 - Cleanup/standardize/improve some messages

This is a work in progress!
2017-05-17 03:49:19 -05:00
Scott Lahteine
00d358d92d Fix a PROBE_MANUALLY bug in ultralcd.cpp 2017-05-17 03:49:19 -05:00
fixoid
c2321b1cdd Separate SWITCHING_NOZZLE and SWITCHING_EXTRUDER 2017-05-16 19:25:17 -05:00
Scott Lahteine
238fb53617 Patch home_all_axes to ignore G28 XYZ parameters 2017-05-16 16:18:38 -05:00
Scott Lahteine
6b6630e11b Clean up trailing whitespace and tabs 2017-05-16 16:06:18 -05:00
Roxy-3D
d30e478f97 Fix incorrectly optimized find_closest_mesh_point_of_type() function (#6761) 2017-05-16 15:24:24 -05:00
oldmcg
5a9e52a3e0 Use COPY_XYZE macro to copy exactly 4 elements (#6758)
Fix undefined DELTA_PROBEABLE_RADIUS for UBL_DELTA
2017-05-16 11:47:51 -05:00
Roxy-3D
8606644343 M48 Fix for Delta Configuration Files & UBL G29 only homes when necessary (#6757)
* Fix M48 for Delta's  There was a scope issue: DELTA_PROBEABLE_RADIUS wasn't getting defined.

* Check if the specified G29 command requires homing
2017-05-16 11:23:50 -05:00
Tannoo
0cd398c25d UBL Menu Updates (#6751)
Things should be pretty stable for a while.   
But it wouldn't surprise me if the Delta people have a need for a few special commands.
2017-05-16 08:45:31 -05:00
Johann Delahayes
a5737cba7c Update french language 2017-05-16 12:27:42 +02:00
Scott Lahteine
0fef9a2983 Remove "ubl." prefix from calls within ubl method 2017-05-16 01:19:45 -05:00
Scott Lahteine
14a4257c7b UBL tabs, whitespace, spelling, etc. 2017-05-16 01:19:45 -05:00
Scott Lahteine
56e2e331ed UBL G29: replace 'O' with 'T'
Since we already used 'T' for `G29` Topology Report in the past, and since 'T' is available…
2017-05-16 01:18:41 -05:00
Scott Lahteine
091f94a6bf Fix up M421 and some comments 2017-05-16 01:14:03 -05:00
Scott Lahteine
4ec4ecff1a Reduce find_closest_mesh_point_of_type a little 2017-05-16 01:14:03 -05:00
Scott Lahteine
f1a1c6873e Patch lcd_implementation_status_screen compiler warning 2017-05-16 00:59:50 -05:00
moebyusDev
2266c0780d fixed spanish lang
It was missing MSG_FILAMENT_CHANGE_HEAT_2 and MSG_FILAMENT_CHANGE_HEATING_2
2017-05-16 00:35:36 -05:00
oldmcg
b213a45efb UBL_DELTA post merge cleanup (#6705)
* UBL_DELTA post merge cleanup:
   fix fade_height, lost during some previous merge
   fix float cx,cy which are not const
   move repeated z_cxcy calc line inside loop
   style fixes and comment fixes/alignment

* Update ubl_motion.cpp

remove unnecessary parentheses

* Update Conditionals_post.h

Change name of define to more accurate meaning:
UBL_GRANULAR_SEGMENTATION_FOR_CARTESIAN
which is not and should not be the default for cartesians with UBL.
2017-05-16 00:30:29 -05:00
Roxy-3D
6f86c46fa6 Fix typo that caused scope issues for DELTA (#6750) 2017-05-15 23:13:45 -05:00
Roxy-3D
1fbcbc05f6 UBL no longer flout's the sacred GCode standard (#6745)
Also clean up ubl_motion.cpp debug info and fix declaration of cx & cy
2017-05-15 16:25:01 -05:00
Scott Lahteine
c262ea92e0 Merge pull request #6733 from abusca/Euskera
Updated Basque translation
2017-05-15 02:30:11 -05:00
Scott Lahteine
267f77b18b More constraint on axis_unhomed_error 2017-05-14 16:03:02 -05:00
Aaron Busca
645096b87a Updated Basque translation
Updated Basque translation with new strings.
2017-05-14 18:29:50 +02:00
Roxy-3D
40d95a4e23 Update the gMax files to display better with Proportional Fonts (#6727)
Update the gMax files to display better with Proportional Fonts
2017-05-13 16:33:04 -05:00
Roxy-3D
c06af63f87 G26's default behaviour ought to be the entire mesh (#6726)
Adding the capability to specify ahead of time how much of the validation pattern to print made it so by default G26 only did one circle and no connecting lines.

It is more natural for the unsophisticated user to just do the entire mesh (bed).   We default the repetition count to GRID_MAX_POINTS+1 to insure we get every last one of them!
2017-05-13 15:53:44 -05:00
Roxy-3D
15040821e0 Setup FolgerTech-i3-2020 files better for the user (#6724)
UltiPanel was enabled, but technically, it is a REPRAP_DISCOUNT_SMART_CONTROLLER
Either configuration works on the machine.  But we want it 'Right'.

Setup the Proportional Font spacing so columns line up nicer on PronterFace and Repetier Host.
2017-05-13 15:14:03 -05:00
Scott Lahteine
67c9b1e332 Update M665 comment, fix M665 code_value code. 2017-05-13 05:11:29 -05:00
Scott Lahteine
37399e3cb5 Fix prepare_move_to_destination_cartesian for UBL 2017-05-13 04:13:19 -05:00
Scott Lahteine
a7fb55ea6d Use GRID_MAX_POINTS. Some formatting 2017-05-12 06:57:19 -05:00
Scott Lahteine
e51b5774db Merge pull request #6699 from mtowara/patch-1
Bugfix PRINTER_EVENT_LEDS
2017-05-12 05:58:25 -05:00
Scott Lahteine
056350d9bf Merge pull request #6656 from FHeilmann/fix_fwretract_pos_z_move
Fix FWRetract with positive z-moves during retracted state
2017-05-12 05:56:08 -05:00
Scott Lahteine
0e582bcfb7 Fix #6691 - redundant line in M665 2017-05-12 05:17:38 -05:00
Markus Towara
68ae7c8d7a Bugfix PRINTER_EVENT_LEDS
Extra closing curly bracket terminates while loop early if PRINTER_EVENT_LEDS defined
2017-05-12 12:13:23 +02:00
Scott Lahteine
ba29da56e0 Add disclaimer for verboten parameters 2017-05-12 02:34:53 -05:00
Scott Lahteine
0696dda470 Cleanups to UBL_DELTA 2017-05-12 02:34:53 -05:00
Scott Lahteine
cbfca29522 M421 tweaks, just to use const 2017-05-12 01:32:34 -05:00
Scott Lahteine
233f824dd6 Define GRID_MAX_POINTS 2017-05-12 01:32:34 -05:00
Scott Lahteine
b17e2d3dcd Apply const in Marlin_main.cpp 2017-05-12 01:32:33 -05:00
Scott Lahteine
92fbea2906 Add some GCodes to the header of Marlin_main.cpp 2017-05-12 01:32:33 -05:00
Scott Lahteine
94e90ca26c Tweak M80/M81 descriptions 2017-05-12 01:32:33 -05:00
Scott Lahteine
ee50dfaaf3 Adjust G26 arguments 2017-05-12 01:32:33 -05:00
Scott Lahteine
b0ba5cae73 Fix a spelling boo 2017-05-12 01:32:33 -05:00