Scott Lahteine
ea0dbee3c9
Enable ABL by type, support bilinear on cartesian
2016-09-25 23:35:37 -05:00
Scott Lahteine
9cebbabd05
Merge pull request #4893 from thinkyhead/rc_stat_led_check
...
Define status LED pins without condition
2016-09-25 18:50:47 -05:00
Scott Lahteine
5fff8d148b
Clean up digital pots and microsteps
2016-09-25 11:16:22 -05:00
Scott Lahteine
570676d265
Include requirements in "Implemented Codes"
2016-09-25 07:50:33 -05:00
Scott Lahteine
cb48292338
Use fastio for literal pins
2016-09-25 06:33:38 -05:00
Scott Lahteine
07703d2bd6
Use _PIN suffix on some pins
2016-09-25 06:33:38 -05:00
Scott Lahteine
203e519bf4
Sanity check for status LED pins
2016-09-25 06:33:38 -05:00
Scott Lahteine
ba43277429
Always define status LED pins
2016-09-25 06:33:37 -05:00
Scott Lahteine
ad691022d7
Fix up spacing in A4JP pins
2016-09-25 06:33:37 -05:00
Scott Lahteine
fba0b67f7d
Rename status led pins
2016-09-25 06:33:37 -05:00
Scott Lahteine
9d86c07702
Clean up some fastio.h spacing
2016-09-25 06:33:37 -05:00
Scott Lahteine
ab84ed22ca
No such thing as G6 and G7 pins
2016-09-25 05:28:22 -05:00
Scott Lahteine
c2f13be750
Mightyboard Revision E
2016-09-25 05:28:04 -05:00
Scott Lahteine
041d127cd3
Match bltouch test in do_homing_move with new code
2016-09-24 23:58:08 -05:00
Scott Lahteine
16461900c2
Fix for HEATERS_PARALLEL
2016-09-24 05:34:40 -05:00
Scott Lahteine
1583d37edd
Comment on M851 case
2016-09-24 05:34:36 -05:00
Scott Lahteine
076f3a8284
unsigned char => uint8_t
2016-09-24 05:23:40 -05:00
Scott Lahteine
8935bed594
MIDDLE_DEAD_ZONE => MIDDLE_DEAD_ZONE_R
2016-09-24 05:18:36 -05:00
Scott Lahteine
6cf0952bf9
Merge pull request #4887 from thinkyhead/rc_autumn_fixups
...
Improve MINIMUM_STEPPER_PULSE
2016-09-24 03:23:42 -05:00
Scott Lahteine
8061f1fac9
Merge pull request #4888 from thinkyhead/fix_warnings_etc
...
Suppress warnings, fix nonlinear_z_offset
2016-09-24 03:22:49 -05:00
esenapaj
7bdc58a818
Suppress warnings, fix nonlinear_z_offset
2016-09-24 03:06:08 -05:00
Scott Lahteine
eabff30e75
Improve MINIMUM_STEPPER_PULSE
2016-09-24 02:23:43 -05:00
esenapaj
3ed8f8331c
Update Japanese translation
...
・Add new translation
2016-09-24 09:24:38 +09:00
Scott Lahteine
da1644313d
Merge pull request #4883 from esenapaj/Follow-up-the-PR-#4860
...
Follow-up the PR #4860 (Fix BLTOUCH string and SERVO_DELAY)
2016-09-23 16:39:37 -05:00
Scott Lahteine
903b8bb60c
No need for auto_bed_leveling_was_enabled
2016-09-23 16:38:22 -05:00
esenapaj
ee60225c07
Follow-up the PR #4860 (Fix BLTOUCH string and SERVO_DELAY)
2016-09-24 06:18:27 +09:00
Scott Lahteine
0951bffcc0
Sanity check homing bumps
2016-09-23 15:39:02 -05:00
Scott Lahteine
a9a21db39f
No homing bump if bump distance is 0 (or less)
2016-09-23 15:39:02 -05:00
Scott Lahteine
2b4da57ea7
Patch Z safe homing for probe Z homing
2016-09-23 15:39:02 -05:00
Scott Lahteine
c6dd539c84
Print error for M42 bad pin
2016-09-23 15:39:02 -05:00
Scott Lahteine
8b399610fb
Skip raw moves to current position
2016-09-23 15:39:02 -05:00
Scott Lahteine
22ece0081e
Pass array pointer to unapply_leveling
2016-09-23 15:39:01 -05:00
Scott Lahteine
cbc158eb62
Add a proper flag for ABL enabled
2016-09-23 15:39:01 -05:00
Scott Lahteine
666e944336
Init xProbe/yProbe for compiler
2016-09-23 15:39:01 -05:00
Scott Lahteine
2c52e6ecf4
Clean up G28 MBL code
2016-09-23 15:39:01 -05:00
Scott Lahteine
0bf1054bb2
Patch do_homing_move for SCARA
2016-09-23 15:39:00 -05:00
Scott Lahteine
6ad0da661c
Report position in G92
2016-09-23 15:39:00 -05:00
Scott Lahteine
199a7b5dd5
Tweak SCARA debugging
2016-09-23 15:39:00 -05:00
Scott Lahteine
865ad25781
Fix prepare_kinematic_move_to precision
2016-09-23 15:39:00 -05:00
Scott Lahteine
85e607153b
Improve kinematic optimization options
2016-09-23 03:03:15 -05:00
Scott Lahteine
2846531f0b
const argument in do_homing_move
2016-09-23 03:03:15 -05:00
Scott Lahteine
cc639d7d9c
Less indentation in Stepper::isr
2016-09-23 03:03:14 -05:00
Scott Lahteine
7dec8071b2
Always synchronize in Stepper::set_position
2016-09-23 03:03:14 -05:00
Scott Lahteine
c6142aa2a1
Minor cleanups in Marlin_main.cpp
2016-09-23 03:03:14 -05:00
Scott Lahteine
0427f3cc3b
Use memcpy/memset in planner
2016-09-23 03:03:14 -05:00
Scott Lahteine
6b9bf8e8fe
Add Planner::sync_from_steppers
...
Use to sync the planner after an interrupted move (when not overriding
the logical position).
2016-09-23 03:03:14 -05:00
Scott Lahteine
be11a8a938
Fix debug in Planner::buffer_line
2016-09-23 03:03:13 -05:00
Scott Lahteine
b211df818e
Make movement functions more available
2016-09-23 03:03:13 -05:00
Scott Lahteine
6335acbf5c
Patch bug in linear unapply_leveling
2016-09-23 03:03:13 -05:00
Scott Lahteine
e8d5073a90
Use probe clearance for bump when homing Z with probe
2016-09-22 15:41:28 -05:00
Scott Lahteine
dbe41245f1
Merge pull request #4821 from thinkyhead/rc_revert_to_raises
...
Z Raise/Clearance rather than Height
2016-09-22 15:30:07 -05:00
Scott Lahteine
747a2257dd
Only deploy/stow BLTOUCH on downward move
2016-09-22 15:26:19 -05:00
Scott Lahteine
e242946ac3
Patch G29 for linear leveling, reachable with probe
2016-09-22 15:26:19 -05:00
Scott Lahteine
b800eb0fed
Add probe option to position_is_reachable
2016-09-22 15:26:19 -05:00
Scott Lahteine
fafafcf9d1
Use unapply_leveling in set_current_from_steppers_for_axis
2016-09-22 15:26:18 -05:00
Scott Lahteine
e69d1e2879
Homing/probing feedrate, comments
2016-09-22 15:26:18 -05:00
Scott Lahteine
7d72ed688c
Revert motor_current_setting to constexpr
...
We should use `constexpr` wherever it makes sense, for its added benefits. See http://stackoverflow.com/questions/13346879/const-vs-constexpr-on-variables
2016-09-22 15:26:18 -05:00
Scott Lahteine
145d9005d1
Fix BLTOUCH string and SERVO_DELAY
2016-09-21 01:45:23 -05:00
Scott Lahteine
2b7cc27c37
Merge pull request #4840 from thinkyhead/rc_G2_G3_arc_r_method
...
Add support for G2/G3 with R parameter
2016-09-21 01:30:37 -05:00
Scott Lahteine
e0e10e0e45
Merge pull request #4859 from thinkyhead/rc_kinematic_and_scara
...
Kinematic and SCARA patches
2016-09-21 01:21:49 -05:00
Scott Lahteine
31f03c838a
Only deploy/stow BLTouch for Z axis
2016-09-21 00:54:54 -05:00
Scott Lahteine
3913e04ac7
Add Delta kinematic optimization options
2016-09-20 18:48:06 -05:00
Scott Lahteine
8e31640229
Optimize prepare_kinematic_move_to
2016-09-20 18:48:06 -05:00
Scott Lahteine
fd9b8ae4d4
Use position_is_reachable in G29, M48
2016-09-20 18:48:06 -05:00
Scott Lahteine
7194e4434f
SCARA support in position_is_reachable
2016-09-20 18:48:06 -05:00
Scott Lahteine
1c5f9821c4
SCARA support in homeaxis
2016-09-20 18:48:05 -05:00
Scott Lahteine
92b4459f6c
Simpler G92 for SCARA
2016-09-20 18:48:05 -05:00
Scott Lahteine
46cc2e3f6a
Fix get_cartesian_from_steppers
2016-09-20 18:31:36 -05:00
Scott Lahteine
435c3ed404
Patch SCARA_move_to_cal for coordinate space
2016-09-20 18:31:36 -05:00
Scott Lahteine
5efb12e889
Simpler report_current_position for SCARA
2016-09-20 18:31:36 -05:00
Scott Lahteine
83fc5e1540
No line_to_* functions with IS_KINEMATIC
2016-09-20 18:31:36 -05:00
Scott Lahteine
59d39d7655
G0 direct move for SCARA
2016-09-20 18:31:36 -05:00
Scott Lahteine
ad9d6870ed
SCARA support in do_blocking_move_to
2016-09-20 18:31:36 -05:00
Scott Lahteine
8542ebcecd
prepare_move_to_destination_raw => prepare_uninterpolated_move_to_destination
2016-09-20 18:31:36 -05:00
Scott Lahteine
f900f97611
Update sw endstops in set_axis_is_at_home
2016-09-20 18:31:36 -05:00
Scott Lahteine
0d43cef1de
M206 for MORGAN_SCARA
2016-09-20 18:31:36 -05:00
Scott Lahteine
e94cb7a380
MORGAN_SCARA kinematics
2016-09-20 18:31:36 -05:00
Scott Lahteine
890bade2fa
Additions, mods to SCARA config
2016-09-20 18:31:36 -05:00
Scott Lahteine
01f1028510
Try on "CLEARANCE" for size
2016-09-20 18:29:49 -05:00
Scott Lahteine
0e7d638a7a
Revert to Probe Raise rather than Probe Height
2016-09-20 18:29:49 -05:00
Scott Lahteine
51e42a2d77
Adjust BLTouch probe behavior
...
Addressing #4855
- Have the pin deploy only immediately before probing
- Have the pin retract immediately after every probe
2016-09-20 16:20:36 -05:00
Scott Lahteine
13523cbf29
Fix and extend BLTouch support
2016-09-20 16:20:36 -05:00
Scott Lahteine
5cbed13f41
'constexpr' => 'const' for PWM_MOTOR_CURRENT
2016-09-20 15:57:48 -05:00
Scott Lahteine
7ae351c92f
Merge pull request #4842 from thinkyhead/rc_DISABLE_Z_MIN_PROBE_ENDSTOP_whassup
...
Drop DISABLE_Z_MIN_PROBE_ENDSTOP, clean up probe config
2016-09-20 12:16:51 -05:00
Scott Lahteine
ba94c89e21
Merge pull request #4852 from esenapaj/Fix-for-advance-extrusion-algorithms
...
Fix for advance extrusion algorithms
2016-09-20 11:33:14 -05:00
esenapaj
954563d603
Adjust spacing
2016-09-20 19:35:44 +09:00
esenapaj
7e9576dc5b
Extend the e_steps[] from int to long for allowing more than 32,767 E steps
...
Probably needed for long straight lines when using high microstepping
2016-09-20 19:35:44 +09:00
esenapaj
b04ed8f9c3
Fix inverted stepper signal of ADVANCED and LIN_ADVANCED
2016-09-20 19:35:44 +09:00
esenapaj
8692748ecd
Fix broken direction signal of ADVANCED and LIN_ADVANCED
...
Remove a setting proccess of E direction in advance_isr()
2016-09-20 19:35:44 +09:00
Scott Lahteine
e9ce42353e
Patch G29 for 3-point leveling
2016-09-20 04:46:41 -05:00
Scott Lahteine
c2744d8a8b
Add support for G2/G3 with R parameter
2016-09-19 00:35:09 -05:00
Scott Lahteine
e05af606a8
Clean up probe config options
2016-09-19 00:26:16 -05:00
Scott Lahteine
153e240cdd
Probe conditionals to Conditionals_LCD.h
2016-09-19 00:25:53 -05:00
Scott Lahteine
ff38a3c3b1
Use SD Detect Pin 53 for 3DRAG, K8200, and K8400
...
See #4316
2016-09-18 23:46:09 -05:00
Scott Lahteine
f38a33a5d8
Add handling of BLTouch error state
2016-09-18 22:00:32 -05:00
Scott Lahteine
c4dcfa254e
Allow override of Z_ENDSTOP_SERVO_NR with BLTOUCH
2016-09-18 22:00:32 -05:00
Scott Lahteine
7d9ebda478
Remove redundant servo probe sanity check
2016-09-18 21:46:18 -05:00
Scott Lahteine
f0beae7641
Fix stupid, stupid, stupid oversight in G29 update
...
Mea culpa!
2016-09-18 16:24:47 -05:00
Scott Lahteine
77639672d7
Move NONLINEAR bed leveling to planner
...
This is in advance of moving non-linear bed leveling to the planner
class.
2016-09-18 13:50:38 -05:00
Scott Lahteine
9429c7db89
Use ABC indices in delta[]
2016-09-18 13:50:38 -05:00
Scott Lahteine
5f2f991192
Use 'logical' rather than 'target' or 'cartesian'
2016-09-18 13:50:38 -05:00
Scott Lahteine
40d3e854f6
Remove redundant extern delta[]
2016-09-18 13:39:47 -05:00
Scott Lahteine
2ebfbc4c8d
Merge pull request #4836 from thinkyhead/rc_some_comments
...
Some comments, const args, debug output tweaks
2016-09-18 13:38:07 -05:00
Scott Lahteine
e5505e3b33
Allow non-square leveling grid
2016-09-18 13:11:20 -05:00
Scott Lahteine
2fc9ad6657
Use const ref args in probe_pt
2016-09-18 12:58:43 -05:00
Scott Lahteine
2c2688d7ad
Adjust comments, spacing
2016-09-18 12:58:42 -05:00
Scott Lahteine
b9d19b0008
Tweak extrapolate_one_point
2016-09-18 12:58:42 -05:00
Scott Lahteine
3c0b591935
Fix nozzle position description
2016-09-18 12:58:42 -05:00
Scott Lahteine
18d8dd4c0f
set_current_from_steppers_for_axis const arg
2016-09-18 12:58:42 -05:00
Scott Lahteine
edfaf1c582
Stepper::report_positions patch
2016-09-18 12:58:42 -05:00
Scott Lahteine
d1f4c3d73b
Patch sync_plan_position comment
2016-09-18 12:58:41 -05:00
Scott Lahteine
0c25af30d4
Document homeaxis
2016-09-18 12:58:41 -05:00
Scott Lahteine
e7882e45e3
Document set_axis_is_at_home
2016-09-18 12:58:40 -05:00
Scott Lahteine
fef959c31a
Merge pull request #4834 from thinkyhead/rc_code_bool
...
Standardize code_value_bool
2016-09-18 12:44:20 -05:00
Scott Lahteine
07ac9a1152
Merge pull request #4822 from blubbfish/patch-3
...
Tweak some german language strings
2016-09-18 11:38:22 -05:00
Scott Lahteine
661fe09ce7
Standardize code_value_bool
2016-09-18 11:32:32 -05:00
Scott Lahteine
20e5140e75
Merge pull request #4833 from thinkyhead/rc_no_scara_axis_scaling
...
Remove SCARA axis_scaling
2016-09-18 11:31:50 -05:00
Scott Lahteine
a501f430eb
Enable M0/M1 with Emergency Parser
2016-09-18 11:14:10 -05:00
Philip Schell
cd8b22b527
Tweak some german language strings
...
Change some string to get a better wording in german
2016-09-16 22:29:39 +02:00
Scott Lahteine
83a41c7ceb
Remove SCARA axis_scaling
2016-09-16 15:21:18 -05:00
Scott Lahteine
d41eeb62af
Merge pull request #4781 from thinkyhead/rc_final_z_correction
...
Use simplified Z correction in G29 when possible
2016-09-16 15:14:19 -05:00
Scott Lahteine
502150046c
Merge pull request #4805 from thinkyhead/rc_config_adjustment
...
Additional documentation of Configuration.h
2016-09-16 15:13:20 -05:00
Scott Lahteine
a1812b55f6
Space out array values
2016-09-16 14:41:05 -05:00
Scott Lahteine
d4599fd8ed
Comment patches to Configuration.h
2016-09-16 14:41:05 -05:00
Scott Lahteine
723e983073
Default EXTRUDE_MAXLENGTH to 200mm
2016-09-16 14:41:04 -05:00
Scott Lahteine
b08bd84f8e
Merge pull request #4806 from blubbfish/patch-2
...
Update language_de.h
2016-09-16 14:39:20 -05:00
darrelhunt
7b8bfa4358
Update pins_TEENSYLU.h
2016-09-16 11:26:37 -07:00
darrelhunt
829c8592f2
Update pins_TEENSY2.h
2016-09-16 11:26:09 -07:00
darrelhunt
e0aee20327
Update pins_SAV_MKI.h
2016-09-16 11:25:42 -07:00
darrelhunt
88d3fc0bcf
Update pins_PRINTRBOARD.h
2016-09-16 11:25:14 -07:00
darrelhunt
4277221abb
Update pins_BRAINWAVE_PRO.h
2016-09-16 11:24:32 -07:00
darrelhunt
b8ecbe9116
Update pins_BRAINWAVE.h
2016-09-16 11:23:52 -07:00
darrelhunt
60f757077e
Update pins_5DPRINT.h
2016-09-16 11:22:52 -07:00
Silvio Didonna
ff2b2d5939
Added missing translations
2016-09-16 01:17:58 +02:00
Philip Schell
2b11c3274c
Update language_de.h
2016-09-15 15:16:11 +02:00
Philip Schell
54e6d12382
Update language_de.h
...
@MarlinFirmware/language-team updated german languagefile to the latest english version
2016-09-14 14:17:21 +02:00
Scott Lahteine
57564ae576
Use last probe point to correct Z when possible
2016-09-14 02:03:43 -05:00
Scott Lahteine
e40646de42
Merge pull request #4803 from thinkyhead/rc_lcd_button_fix
...
Clear LCD button state, apply timer to all
2016-09-13 18:03:39 -05:00
Scott Lahteine
29f224594c
Fix some regressive typos in G29
2016-09-13 17:31:02 -05:00
Scott Lahteine
5ecc7d9f25
Clear LCD button state, apply timer to all
...
Addressing #3007
2016-09-13 16:10:27 -05:00
Scott Lahteine
9b0931ef74
Apply fixed EXTRUDER_RUNOUT_PREVENT
2016-09-13 03:33:04 -05:00
Scott Lahteine
b1a60e8954
Reformat, rearrange, tweak, and document
...
- Add comments to several functions
- Add an option to use Fast SQRT for Delta IK
- Group related functions together
- Outdent some leveling-related functions
2016-09-13 03:33:04 -05:00
Scott Lahteine
61284cbd8c
Various code style adjustments
2016-09-13 03:33:04 -05:00
Scott Lahteine
788a16fc46
Clean up serial out code
2016-09-13 03:33:03 -05:00
Scott Lahteine
0e38bea79d
Shrink 3-point leveling code
2016-09-13 03:33:03 -05:00
Scott Lahteine
4f75ce6957
Unify reset_bed_level for linear/non-linear
2016-09-13 03:33:03 -05:00
Scott Lahteine
41d8149bce
Sanity check for more than 1 controller
2016-09-13 03:33:02 -05:00
Scott Lahteine
40785ce8ac
Use count method for kinematic sanity check
2016-09-13 03:33:02 -05:00
Scott Lahteine
3236762e07
Clean up sanity check for LCD_PROGRESS_BAR
2016-09-13 03:33:02 -05:00
Scott Lahteine
a9ed23225f
bed_level => bed_level_grid
2016-09-13 03:33:02 -05:00
Scott Lahteine
82be65065c
Fix up untilted_stepper_position and set_current_from_steppers_for_axis
2016-09-13 03:33:01 -05:00
Scott Lahteine
d65f5d816f
Patch to fix kinematics
2016-09-13 03:33:01 -05:00
Scott Lahteine
e529c6407e
Rename set_cartesian_from_steppers, cartesian_position
2016-09-13 03:33:01 -05:00
Scott Lahteine
c109399bf6
Fix planner leveling and rename arguments
...
Use lx, ly, lz for “logical” positions
2016-09-13 03:33:01 -05:00
Scott Lahteine
d4f21af6b3
sync_plan_position_delta => sync_plan_position_kinematic
2016-09-13 03:33:01 -05:00
Scott Lahteine
acd1b6e9c0
Rename delta_grid spacing for general nonlinear
2016-09-13 03:33:00 -05:00
Scott Lahteine
c5fa70809b
Implement M0/M1 for EMERGENCY_PARSER
2016-09-13 03:33:00 -05:00
Scott Lahteine
786d1afb72
Add position_is_reachable, use in home_z_safely
2016-09-13 03:33:00 -05:00
Scott Lahteine
b4034915f8
Move z safe homing to its own function
2016-09-13 03:33:00 -05:00
Scott Lahteine
c84b14c77a
Move delta homing to its own function
2016-09-13 03:32:59 -05:00
Scott Lahteine
f9a192c7e3
Move setup() and loop() to the end
2016-09-13 03:32:59 -05:00
Scott Lahteine
8ff338c2b9
Patch stepper.h for SCARA
2016-09-13 03:32:59 -05:00
Scott Lahteine
74d7f5e57b
Patch SCARA example config
2016-09-13 03:32:59 -05:00
Scott Lahteine
6ab54c60b1
Add conditionals for kinematics, leveling
2016-09-13 03:32:59 -05:00
Scott Lahteine
21514568fd
Add enum for ALL_AXES
2016-09-13 03:32:58 -05:00
Scott Lahteine
413b61e64a
Add HYPOT2 and float comparison macros
2016-09-13 03:32:58 -05:00
Scott Lahteine
a6f6ed352b
Fix comment on FILAMENT_RUNOUT_SENSOR
2016-09-13 02:14:34 -05:00
Scott Lahteine
48e14d049a
Merge pull request #4710 from thinkyhead/rc_fix_leveling_maths
...
Bed leveling that accounts for home XYZ
2016-09-10 15:47:39 -05:00
Scott Lahteine
416821a71c
Merge pull request #4765 from thinkyhead/rc_endstop_direction
...
Sanitycheck endstop plugs based on homing direction
2016-09-10 14:49:50 -05:00
Scott Lahteine
9248cfb0ad
Bed leveling that accounts for home XYZ
2016-09-10 13:47:21 -05:00
Scott Lahteine
6ac9d895ca
Tweak Filament Width variables
2016-09-10 13:29:25 -05:00
Scott Lahteine
68ba45572e
Don't say "heating complete" unless done
2016-09-10 13:29:25 -05:00
Scott Lahteine
2bfc6fe1b0
Move XYZ constants closer to the top
2016-09-10 13:25:44 -05:00
Scott Lahteine
12b94e419f
Sanitycheck endstop plugs based on homing direction
2016-09-08 13:56:32 -05:00
Scott Lahteine
29c4f67a29
Additional path - followup to #4743
2016-09-07 15:08:12 -05:00
Robert Bartl
494d5770b8
makefile fix for arduino 1.6.9 unzipped
2016-09-03 19:45:27 -05:00
Scott Lahteine
6f71bd7372
Merge pull request #4754 from thinkyhead/rc_mixing_regression
...
Unify counter_m and counter_M
2016-09-02 12:27:43 -05:00
Scott Lahteine
9bf78ef465
Fix capitalization of counter_m
2016-09-02 11:31:45 -05:00
Scott Lahteine
42b5616327
Try bool for direction instead of long
2016-09-02 11:28:48 -05:00
Scott Lahteine
cbe9ab902c
Merge pull request #4747 from thinkyhead/rc_sd_show_percent
...
Option to show SD percent on Graphical LCD
2016-09-02 07:44:42 -05:00
Scott Lahteine
f20b2b21eb
Optimize LCD string/char printing
2016-09-02 06:41:24 -05:00
Scott Lahteine
3b2f7ba225
Merge pull request #4748 from thinkyhead/rc_sd_print_timer
...
Patch duration_t toDigital method
2016-09-02 04:41:11 -05:00
Kai
445d8215e4
Option to show SD percent on Graphical LCD
2016-09-02 02:17:36 -05:00
Scott Lahteine
d07a913f21
Tweak to stepper advance e_steps update
2016-09-02 02:06:17 -05:00
Scott Lahteine
aaef7c6b89
Fix a misspelling of minimum
2016-09-02 01:42:38 -05:00
Scott Lahteine
ad659b5f91
Merge pull request #4725 from thinkyhead/rc_log_machine_info
...
Log machine info in G28 and G29
2016-09-01 23:58:59 -05:00
Scott Lahteine
c6859a1e54
Handle hours >= 100
2016-09-01 23:54:48 -05:00
Kai
9f706a9635
Patch duration_t toDigital method
2016-09-01 23:34:15 -05:00
Scott Lahteine
c3caa42630
Merge pull request #4738 from thinkyhead/rc_ensure_floats
...
Optimize stepper ISRs, plus cleanup, shorthand
2016-09-01 14:36:22 -05:00
Scott Lahteine
426f662586
Apply MINIMUM_STEPPER_PULSE in stepper advance_isr
2016-08-30 14:31:48 -05:00
Scott Lahteine
8c7ee4599e
Optimize stepper advance_isr
2016-08-30 14:31:48 -05:00
Scott Lahteine
9725bcd099
Minor "optimizations" in stepper ISR
2016-08-30 14:21:43 -05:00
Scott Lahteine
4ec3d1ea58
Add some commentary to stepper ISR
2016-08-30 14:21:15 -05:00
Scott Lahteine
d9bcc7bb45
Set a bool when a stepper block is done
2016-08-30 14:20:48 -05:00
Scott Lahteine
08f717e5f7
Use bit-size typedefs for some stepper vars
2016-08-30 14:19:49 -05:00
Scott Lahteine
d554c1dda8
Clean up planner kernel pass methods
2016-08-30 14:16:13 -05:00
Scott Lahteine
b2e5ec85d7
Add [XYZ]_CENTER conditionals
2016-08-30 14:15:41 -05:00
Scott Lahteine
7e20448a2d
Add HOMING_Z_WITH_PROBE conditional
2016-08-30 13:29:26 -05:00
Scott Lahteine
0e4107da34
Minor cleanup of homeaxis, etc.
2016-08-30 13:29:26 -05:00
Scott Lahteine
f1201e11c7
Improve the Jerk description
2016-08-29 12:39:21 -05:00
Scott Lahteine
3f038bef00
Heading for movement settings
2016-08-29 02:01:34 -05:00
Scott Lahteine
fd2269f489
Log machine info in G28 and G29
2016-08-28 20:48:28 -05:00
Scott Lahteine
6eaf4f4909
Fix spacing of debug output in homeaxis
2016-08-28 19:43:33 -05:00
Scott Lahteine
1e6d1c39ea
Improve verbiage of dropsegments sanity error
2016-08-28 19:40:32 -05:00
Scott Lahteine
0729a8f08d
Use the probe travel height for pre-probe move
...
Instead of using the home_bump for Z to move close to the bed before doing a slow probe, use the probe travel height.
2016-08-28 19:13:08 -05:00
Scott Lahteine
dd94d0b9d5
Fix bed probing bug without PROBE_DOUBLE_TOUCH
...
If `PROBE_DOUBLE_TOUCH` wasn't enabled, the probe move could be way too short! See #4701 for example.
2016-08-28 19:00:25 -05:00
Scott Lahteine
35a0c46f16
Tweak debug output for probe in G29
2016-08-28 18:44:44 -05:00
Scott Lahteine
a82a89bc58
Merge pull request #4722 from thinkyhead/rc_minimum_stepper_pulse
...
MINIMUM_STEPPER_PULSE option
2016-08-28 10:03:32 -05:00
Scott Lahteine
a2572d2854
Fix Danish encoding and an error message
2016-08-28 09:51:06 -05:00
Scott Lahteine
759234af60
MINIMUM_STEPPER_PULSE option
2016-08-27 23:58:40 -05:00
Scott Lahteine
2cb63f0bf7
Merge pull request #4719 from thinkyhead/rc_delta_homing_patch
...
Marlin patches for homing, esp. Delta
2016-08-27 20:46:50 -05:00
Scott Lahteine
8241cf9901
Merge pull request #4720 from thinkyhead/rc_allow_stepper_omission
...
Patch stepper.cpp to allow omitting steppers
2016-08-27 20:36:22 -05:00
Scott Lahteine
7e893f4309
Merge pull request #4721 from thinkyhead/rc_temperature_isr_comments
...
Rc temperature isr comments
2016-08-27 20:36:03 -05:00
Scott Lahteine
73d86098b7
Marlin patches for homing, esp. Delta
2016-08-27 20:32:05 -05:00
Scott Lahteine
338bc768b1
Merge pull request #4717 from thinkyhead/rc_log_the_probe
...
Debug logging of nozzle type and offsets
2016-08-27 20:24:19 -05:00
Scott Lahteine
fae92e3f3c
Merge pull request #4718 from thinkyhead/rc_twibus_patch_20160827
...
TWIBus patch for proper use of Wire.requestFrom
2016-08-27 20:22:53 -05:00
Scott Lahteine
a485a19052
Added optional planner logging
2016-08-27 20:12:22 -05:00
Scott Lahteine
e9bfca5870
Additional comments for Temperature::isr
2016-08-27 20:12:22 -05:00
Scott Lahteine
a255945f29
Add DEBUG_ALL enum
2016-08-27 20:12:22 -05:00
Scott Lahteine
a28e15399f
Patch stepper.cpp to allow omitting steppers
2016-08-27 20:11:17 -05:00
Scott Lahteine
2b226bc5c2
TWIBus patch for proper use of Wire.requestFrom
2016-08-27 20:09:28 -05:00
Scott Lahteine
d641344d3a
Remove redundant probe offset in homing
2016-08-27 19:58:56 -05:00
Scott Lahteine
fb19a3cdec
Merge pull request #4649 from thinkyhead/rc_boelle_danish_update
...
Danish update (18 Aug 2016)
2016-08-27 19:06:05 -05:00
Scott Lahteine
00638131e5
Debug logging of nozzle type and offsets
2016-08-27 15:21:01 -05:00
Scott Lahteine
8e9ac72191
Merge pull request #4709 from thinkyhead/rc_log_the_reason
...
Log whether homing with probe or endstop
2016-08-26 17:05:55 -05:00
Scott Lahteine
991a34aff2
Log whether homing with probe or endstop
2016-08-26 15:50:10 -05:00
Scott Lahteine
3b93b79f5c
Merge pull request #4703 from bgort/RCBugFix
...
Add note suggesting RAMBo users use the RAMBo board type or platformio environment
2016-08-26 14:53:56 -05:00
Scott Lahteine
00cdb15cec
Move invariant LCD strings to language.h
2016-08-26 02:48:57 -05:00
Bo Herrmannsen
d2ae5b00d9
Danish up to date (18 Aug 2016)
2016-08-26 02:48:57 -05:00
Scott Lahteine
e78274a7f4
Consistent order/formatting of pins files
2016-08-25 20:59:45 -05:00
Scott Lahteine
11e9530111
Properly handle probe pin for BQ printers
2016-08-25 20:59:44 -05:00
Scott Lahteine
1968983f35
Move PROBE_SELECTED to an earlier point
2016-08-25 20:59:44 -05:00
Brian
2fae32f35f
Add note suggesting RAMBo users use the RAMBo board type or platformio environment;
...
Add note that Viki 2.0 wiring diagram v1.2 has a mistake in it;
2016-08-25 15:05:29 -04:00
esenapaj
1749a7fae3
Suppress warning
2016-08-24 00:18:06 +09:00
Scott Lahteine
d07d85ac9f
Ensure probe points at the delta edge are kept
2016-08-23 05:09:56 -05:00
AnHardt
7e36b76af2
Repair MarlinSerial with TX-buffer
...
These '{' are important to avoid the redefinition of `unsigned char _sreg = SREG;`
at the same level.
Used in
```
#define CRITICAL_SECTION_START unsigned char _sreg = SREG; cli();
```
2016-08-22 23:40:09 +02:00
Gege2B
1e65f1a1d8
Update french language
2016-08-22 12:46:58 -05:00
Scott Lahteine
ab59280075
MIN_SEGMENTS_FOR_MOVE => MIN_STEPS_PER_SEGMENT
...
Follow-up to #4666
2016-08-21 08:56:03 -05:00
Scott Lahteine
27b80b1dd1
Merge pull request #4667 from thinkyhead/rc_M211_sw_endstop_switch
...
M211: Enable/Disable Software Endstops
2016-08-21 06:44:00 -05:00
Scott Lahteine
14a03727e1
Tweak serialprintPGM
2016-08-21 00:10:09 -05:00
Scott Lahteine
2f223b8c79
Use ABC and XYZ for "3"
2016-08-21 00:10:08 -05:00
Scott Lahteine
4cd1ad8f28
Adjustments to M209, G28, M605
2016-08-21 00:10:08 -05:00
Scott Lahteine
e354cf5884
Apply sw_endstops_enabled to manual move
2016-08-21 00:10:08 -05:00
Scott Lahteine
280534c06f
Add M211: Enable/Disable Software Endstops
2016-08-21 00:10:08 -05:00
Scott Lahteine
01d4703429
PREVENT_DANGEROUS_EXTRUDE => PREVENT_COLD_EXTRUSION
...
Also improve the documentation of this and related options, and set
EXTRUDE_MINTEMP to 170 everywhere.
2016-08-20 23:35:27 -05:00
Scott Lahteine
a1f6cf1e5d
Merge pull request #4665 from thinkyhead/rc_lcd_not_ultipanel
...
Clean up ultralcd code, dependencies on ULTIPANEL
2016-08-20 22:43:17 -05:00
Scott Lahteine
1a255afa36
Merge pull request #4666 from thinkyhead/rc_dropsegments_adj
...
dropsegments => MIN_SEGMENTS_FOR_MOVE
2016-08-20 22:42:16 -05:00
Scott Lahteine
374f8d2014
dropsegments => MIN_SEGMENTS_FOR_MOVE
2016-08-20 18:52:15 -05:00
Scott Lahteine
76c3f326ff
Clean up DOGM code, comments
2016-08-20 18:33:12 -05:00
Scott Lahteine
71319adbb8
Wrap ULTIPANEL-dependent code
2016-08-20 18:33:11 -05:00
Scott Lahteine
305913545e
Move number-to-string function to utility.*
2016-08-20 18:33:11 -05:00
Scott Lahteine
394c80c87b
Merge pull request #4655 from thinkyhead/rc_serial_static
...
Optimize, reduce size of MarlinSerial
2016-08-20 15:51:57 -05:00
MagoKimbra
28d1e5a946
Fix_Zig_Zag
2016-08-20 11:28:08 +02:00
Scott Lahteine
14395a1a96
Optimize, reduce size of MarlinSerial
2016-08-19 16:53:20 -05:00
Scott Lahteine
4d4c00d69c
Merge pull request #4651 from thinkyhead/rc_homing_vs_leveling_z
...
Improvements to homing / leveling
2016-08-19 15:45:49 -05:00
Brian Gortney
8fae3e1f9f
Add Rambo support/env to platformio.ini; properly maps extended pins
2016-08-19 07:11:23 -04:00
Scott Lahteine
12d72363cb
Do Delta radius check without sqrt
2016-08-19 05:05:48 -05:00
Scott Lahteine
044f800be9
Use SERIAL_PROTOCOLLNPGM in G28
2016-08-19 04:45:33 -05:00
Scott Lahteine
d309a9647d
Include probe offset for moving "close to the bed"
2016-08-19 04:45:33 -05:00
Scott Lahteine
35a08eeaeb
Use Z_HOME_DIR over axis_home_dir where we can
2016-08-19 04:45:32 -05:00
Scott Lahteine
99b22d5785
Default AUTO_BED_LEVELING_GRID_POINTS to 3
2016-08-19 04:45:32 -05:00
Scott Lahteine
9b1f3f7d12
Sanity-check DELTA + AUTO_BED_LEVELING_GRID_POINTS
2016-08-19 04:45:32 -05:00
Scott Lahteine
733453569b
Merge pull request #4650 from thinkyhead/rc_percent_is_percent
...
extruder_multiplier => flow_percentage
2016-08-19 04:38:18 -05:00
Scott Lahteine
55355a4fb8
Make probed points more symmetrical
2016-08-19 04:32:03 -05:00
Scott Lahteine
1f776f6034
Tweak some code comments
2016-08-19 04:32:02 -05:00
Scott Lahteine
748228cf40
Use named indices for delta_grid_spacing
2016-08-19 04:32:02 -05:00
Scott Lahteine
ead333e7da
line_to_axis_pos => do_homing_move
2016-08-19 04:32:02 -05:00
Scott Lahteine
7a4ccd7967
Add do_probe_move with Z fixes
2016-08-19 04:32:02 -05:00
Scott Lahteine
a1bad589c9
Augment debug/homing logging
2016-08-19 04:32:02 -05:00
Scott Lahteine
41b5c48129
Update software endstops if EEPROM is loaded
2016-08-19 04:32:01 -05:00
Scott Lahteine
628dcbc764
extruder_multiplier => flow_percentage
2016-08-18 22:13:47 -05:00
Jason Westervelt
d222ee4de2
Update language_ru.h
...
Updated missing translations. Caught up on change to MSG_HOME.
2016-08-17 13:55:44 -07:00
Scott Lahteine
d63b8e2b2b
Additional details for I2C_SLAVE_ADDRESS
2016-08-15 19:27:53 -07:00
Scott Lahteine
7427290d3a
Merge pull request #4634 from thinkyhead/rc_lang_disp_char
...
Set language display charset in language.h
2016-08-15 19:25:56 -07:00
Scott Lahteine
aa30550b21
Keep SIMULATE_ROMFONT only language.h
2016-08-15 19:11:31 -07:00
Scott Lahteine
cec61c350d
Set language display charset in language.h
2016-08-15 19:01:12 -07:00
Scott Lahteine
165d7abb1b
Merge pull request #4625 from thinkyhead/rc_i2c_request_capture_flush
...
Add request, capture, flush to TWIBus
2016-08-15 18:15:43 -07:00
RicardoGA
507784b846
Fix Messages length
2016-08-15 10:30:51 -05:00
Scott Lahteine
bd928a69ec
Add request, capture, flush to TWIBus
2016-08-15 00:04:20 -07:00
RicardoGA
7b7f319ed5
Update Spanish Lenguage
...
Adds missing messages
2016-08-14 23:30:43 -05:00
Scott Lahteine
132322e4d9
Fix #4614 : currentScreen only defined with ULTIPANEL
2016-08-14 00:29:46 -07:00
Scott Lahteine
dcd26b0403
Merge pull request #4621 from thinkyhead/rc_fan_set_output
...
Init PWM-able AUTO_FAN pins with SET_OUTPUT
2016-08-13 21:22:27 -07:00
Scott Lahteine
79ba983782
Allow reply() to use const string with no warning
2016-08-13 21:05:44 -07:00
Scott Lahteine
3a0a94b21a
Always init configured fan pins
2016-08-13 20:38:40 -07:00
Scott Lahteine
c63003ed3e
Use matching auto-fan flags
2016-08-13 20:38:40 -07:00
Scott Lahteine
3475fd7b0f
Init PWM-able auto fan pins with SET_OUTPUT
2016-08-13 20:38:40 -07:00
Scott Lahteine
abf9696db1
Loop fan-pins based on array size
2016-08-13 20:05:32 -07:00
Scott Lahteine
e88575c8ec
Init next_auto_fan_check_ms to zero
2016-08-13 20:05:32 -07:00
Scott Lahteine
7272ec5608
Update HAS_FAN flags for 4 auto fans
2016-08-13 20:05:32 -07:00
Scott Lahteine
7b21811a9a
Flags for matching auto-fans
2016-08-13 20:05:32 -07:00
Scott Lahteine
97e0aed304
Further refinements of TWIBus
2016-08-13 18:32:41 -07:00
Scott Lahteine
38fa1b1939
Merge pull request #4196 from cimbalo/Platformio_support
...
Add working PlatformIO support
2016-08-12 17:32:09 -07:00
Scott Lahteine
d7edc039af
Merge pull request #4605 from thinkyhead/rc_3drag_fan_is_8
...
Fixup 3DRAG pins based on updated RAMPS pins
2016-08-12 17:30:27 -07:00
Silvio
923388e0c7
Fix acceleration and feedrate following bq/Marlin
2016-08-12 15:42:20 +02:00
Scott Lahteine
405afec393
Include decimeters in filamentUsed display
2016-08-12 05:16:43 -07:00
Scott Lahteine
fef0e8ba86
Merge pull request #4610 from thinkyhead/rc_sd_pause_and_stop
...
Fix stopSDPrint so it works when paused
2016-08-12 04:09:22 -07:00
Scott Lahteine
192ac2dfd7
Squish some CardReader code
2016-08-12 03:32:42 -07:00
Scott Lahteine
61932b859e
Fix bug in CardReader::stopSDPrint
...
If the SD print is paused, it cannot be stopped
2016-08-12 03:21:10 -07:00
Scott Lahteine
9e5d5a3b7c
Merge pull request #4597 from tnw513/italian_fix
...
Added hyphenated strings for full graphic display
2016-08-12 02:37:53 -07:00
Silvio Didonna
f999292eea
added hyphenated letters for full graphic display and fixed some strings
2016-08-12 08:57:22 +02:00