SunRed/Marlin-Artillery-M600
Archived
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
8954 commits 1 branch 0 tags 119 MiB
Commit graph

7406 commits

Author SHA1 Message Date
Tannoo
94dd39b3b7 LCD_UBL_memory_slot_corrections (#7516) 
* LCD_UBL_memory_slot_corrections

Changed the memory slot edit function to work with the
`settings.calc_num_meshes()`

* Add a little more safety margin...

* More corrections

Error handling when the EEPROM is not available.
 2017-08-31 18:33:07 -05:00
Roxy-3D
8587c4e1ec Minor corrections to 32-bit branch (#7514) 
Mostly...  clean up some compile time warnings for the 20x4 LCD Display.
 2017-08-31 18:32:09 -05:00
Bob-the-Kuhn
7342d5c07a ST7565 2017-08-31 18:31:43 -05:00
Bob-the-Kuhn
97444391e0 Servo & PWM support for LPC1768 (#7500) 2017-08-31 18:31:43 -05:00
Tannoo
859fa35287 Re-Arm bugfixes (#7495) 
* UBL_correction

* RGB Map function
 2017-08-31 18:31:43 -05:00
Bob-the-Kuhn
d80877d570 Set pinMode with every digitalWrite (legacy compatibility) 2017-08-31 18:31:07 -05:00
Chris Pepper
9a950e3a5a Update the delay functions and change the default pinmap for character displays (#7434) 2017-08-31 18:31:07 -05:00
Scott Lahteine
105324b85b Match the license headers in other files 2017-08-31 18:31:07 -05:00
Bob-the-Kuhn
69704b93f2 ultralcd.cpp fix compile error - switch to int16_t 2017-08-31 18:31:07 -05:00
Chris Pepper
61c0a10efe Revert "SPI API platform implementation stubs" (#7416) 
This reverts commit 2dfa6ca72a2e8d43caf4932ca0d35792f0638917.

Revert "Base HAL SPI Changes"

This reverts commit 2afc521b8b6a81b2281a038f1b99a69f4a008e64.

Revert "Initial HAL SPI API"

This reverts commit 58f7ffe09ab5bc034b6510f5204f8d342138abaa.
 2017-08-31 18:31:07 -05:00
Chris Pepper
a5cf3a190c bugfix-2.0.x critical fix (#7401) 
* Fix mistake in gitignore file and add in missing core files.

The missing leading slash on "lib" meant all folders names lib in the directory tree are ignored, rather than just the top level PlatformIO lib folder

* Add LiquidCrystal Library and associated headers modified to compile.
 2017-08-31 18:23:44 -05:00
Bob-the-Kuhn
76da81c1de minimize SD card reads when using SDCARD_SORT_ALPHA (Re-ARM board) 
Because of the Re-ARM card's pinout there is only one SPI connected to
the RepRap Discount Full Graphic LCD display.  The LCD responds to ANY
SCK transitions no matter if it's enable is inactive.  The result is
garbage (usually bars) on the LCD display whenever there is SD card
activity.

This code minimizes this by only accessing the SD card when changing
directory levels if :
SDCARD_SORT_ALPHA is enabled
SDSORT_USES_RAM is true
SDSORT_CACHE_NAMES is true

The code changes result in file names being pulled from the ALPHA SORT
memory array rather than the SD card.

The code also gives the file count and file index functions their own
variables.  When they shared a common variable the index function
sometimes resulted in the file count being short by 1.

=======================================================================

cardreader.cpp & pins_RAMPS_RE_ARM.h changes

Added another condition to cardreader.cpp to enable getting file names
only from RAM.

pins_RAMPS_RE_ARM.h :
Added comments about the SD card accesses and the LCD display
Combined all versions into this one.
 2017-08-31 18:23:44 -05:00
Bob-the-Kuhn
84a11cfedc HAL compatible pinsDebug & misc 
Re-ARM has been tested.  AVR has not been tested.

1) moved all cpu specific items to files in the low level HAL directory
for that CPU (pinDebug_Re-ARM.h & pinsDebug_AVR_8_bit.h

2) added pinsDebug.h to the top level directory

3) modified HAL_pinsDebug.h to select the correct support file for the
selected CPU

4) Patched sanitycheck to stop throwing false errors.  A long term
solution will be done

5) misc changes & bug fixes
arduino.cpp - included macros.h to fix a missing definition
pinmap_re-arm.h - removed a duplicated line.
pinmapping.h - changed from "ENABLED" to "defined" to fix a compile
error

======================================================================

split SanityCheck up, improve pinsDebug system

======================================================================

switch to latest pins_RAMPS_RE_ARM.h
 2017-08-31 18:23:44 -05:00
Christopher Pepper
32e759c928 SPI API platform implementation stubs 2017-08-31 18:23:44 -05:00
Christopher Pepper
4183a249b6 Moved CMSIS and other LPC1768 dependencies 
Fixes Arduino IDE builds for 8-bit AVR,
misc: Adafruit NeoPixel currently incompatible with Teensy 3.5-6, blacklisted
 2017-08-31 18:23:44 -05:00
Christopher Pepper
b55295ad33 Post merge fix 
Add macros.h to allow Enabled macro, also need to reference include files directly
 2017-08-31 18:23:44 -05:00
Christopher Pepper
c66d1ac651 Debug Pins Support 2017-08-31 18:21:38 -05:00
Christopher Pepper
a31e32969f Base HAL SPI Changes 2017-08-31 18:21:38 -05:00
Christopher Pepper
bcd050f33b Initial HAL SPI API 2017-08-31 18:21:38 -05:00
Christopher Pepper
44b0c186a6 HAL for Re:ARM (LPC1768) architecture 2017-08-31 18:21:38 -05:00
teemuatlut
f3e562e46e HAL for 32-bit Teensy (3.5, 3.6) architecture 2017-08-31 18:15:07 -05:00
Christopher Pepper
cfef925559 HAL for DUE architecture 2017-08-31 18:15:07 -05:00
Christopher Pepper
4b16fa3272 Implement HAL and apply macros across code-base 
Implement AVR Platform
 2017-08-31 18:14:31 -05:00
Scott Lahteine
e4fcf460e7 Marlin bugfix-2.0.x Version/README 2017-08-31 17:56:08 -05:00
Scott Lahteine
367e1b54ba Merge pull request #7591 from thinkyhead/bf1_misc_patches 
M111: no args reports current flags
 2017-08-31 15:19:29 -05:00
Scott Lahteine
8a184a526a Marlin: Patch G33, allow M111 to give status 2017-08-31 14:35:00 -05:00
Scott Lahteine
353c23b16e Enforce BED_CENTER_AT_0_0 on Delta, SCARA 2017-08-31 14:34:59 -05:00
Scott Lahteine
898f48e331 CNC workspace planes for G5 
According to LinuxCNC, G5 should throw an error if the current plane mode isn't XY.
 2017-08-31 14:29:29 -05:00
Scott Lahteine
5851c2d36f MAX7219 followup (#7564) 
* Add MAX7219_DEBUG to Travis CI testing

* Tweak config and use standard pin naming for MAX7219_DEBUG

* MAX7219: Apply coding standards, use macros, etc.

* Make code work...
 2017-08-31 11:44:43 -05:00
Scott Lahteine
52073f21c5 Merge pull request #7556 from thinkyhead/bf1_slovak_language 
Slovak UTF-8 translation
 2017-08-27 21:05:53 -05:00
Scott Lahteine
321f98f867 Fix servo delay in Folgertech config 2017-08-27 20:53:27 -05:00
jneilliii
36771e9492 Fixes required for Creality CR-10 2017-08-27 20:39:16 -05:00
Roxy-3D
3f0b38ed5d Add Max7219 LED Matrix Debug Support (#7563) 
* Add Max7219 LED Matrix Debug Support

The Max7219 8x8 LED Matrix's are very helpful for debugging new code.
And for that matter, just trying to maximize printer settings without
causing stuttering.

The displays are very inexpensive (under $2.00 with shipping) and
provide a lot of help when trying to debug complicated code.

* Try to keep Makefile up to date.
 2017-08-25 17:03:07 -05:00
GMagician
0067bb2840 Addressing #7552 
When M405 is used it changes 'volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]' value. When M406 disables M405 it leaves the value unchanged.
This PR applies 'calculate_volumetric_multipliers' in M406 instead of resetting it to 1.0 because M200 may not be compatible with M405 hence I'm sure to restore anyway with correct value.
 2017-08-25 03:23:16 -05:00
Scott Lahteine
2b12093589 Merge pull request #7532 from thinkyhead/bf1_fan_mux_vben 
New feature: Part-Cooling Fan Multiplexer
 2017-08-25 03:16:40 -05:00
Michal Holes
54d48130f3 Slovak UTF-8 translation 
Slovak UTF-8 translation
 2017-08-23 19:14:35 -05:00
Scott Lahteine
86c024ce98 Organize, document pins.h include lines 2017-08-23 18:33:00 -05:00
Scott Lahteine
c7b07d20f2 Minor patches to pins files 2017-08-23 18:32:59 -05:00
Scott Lahteine
356af7dcb0 Tweak Sanguinololu-related pins files 2017-08-23 18:32:59 -05:00
Scott Lahteine
11a724d8fc Sanguinololu example configuration 2017-08-23 18:32:59 -05:00
Scott Lahteine
e337df2e98 Miscellaneous tweaks to serial outputs, code cleanups 2017-08-23 18:32:58 -05:00
Vben
c0409b85e7 New feature: Part-Cooling Fan Multiplexer 2017-08-18 15:59:04 -05:00
Scott Lahteine
e82e9073d6 Merge pull request #7530 from GMagician/Code-reduction 
Code reduction with some configurations
 2017-08-18 13:57:59 -05:00
GMagician
6127154af3 Fix identation by tab 
There was a tab instead of spaces
 2017-08-18 11:34:55 +02:00
GMagician
b94a1c6b9f Code reduction this some configurations 
When switching noozle and extruder but these operations are done by the same servo in 'setup' function there is a unnecessary call
 2017-08-18 11:11:00 +02:00
GMagician
405a2132f3 #7529 compile fix 
I made an error in previous fix
 2017-08-17 22:04:28 +02:00
GMagician
869d7f3703 #7504 missing part 
#7504 integration has missed this part.
When more than 1 servo is used with bltouch it's impossible to predefine default servo delay for it.
In my original fix I completely removed this part but maybe this is a better compromise
 2017-08-17 21:43:47 +02:00
Scott Lahteine
101ba70517 Merge pull request #7505 from thinkyhead/bf1_anet_1_pio 
Add Anet 1.0 to Platformio.ini
 2017-08-17 00:33:20 -05:00
Vben
4817b39d98 Added new feature for AutoParking Extruder (APE) 2017-08-16 17:33:11 -05:00
Scott Lahteine
6772e33ef6 Use [XY]_CENTER for error correction 
Followup to #7512
 2017-08-16 16:13:09 -05:00
Scott Lahteine
385f1bb9e5 Merge pull request #7504 from thinkyhead/bf1_servo_delays 
Individual servo delays
 2017-08-16 16:05:22 -05:00
Scott Lahteine
2a31c9f2ce Merge pull request #7515 from cdedwards/bugfix-1.1.x 
Fix for G26 spam output
 2017-08-16 16:01:10 -05:00
MTrab
5fa61c0ad3 Add Anet 1.0 to Platformio.ini 
Added env:anet10 to platformio.ini for easy compile and upload to this board
 2017-08-16 15:59:20 -05:00
Scott Lahteine
b3f59ec945 Merge pull request #7519 from thinkyhead/bf1_cleanups_aug_16 
Add "Level Corners" menu item
 2017-08-16 15:58:15 -05:00
Tannoo
b33739d493 UBL_Language_Update (#7520) 
* UBL_Language_Update

Translatable strings

* Use slightly better wording...

* Use slightly better wording...
 2017-08-16 09:49:04 -05:00
Scott Lahteine
a1878cd1c0 Add "Level Corners" menu option 2017-08-16 02:54:33 -05:00
Scott Lahteine
0a18fb735e Use "PSU" label to fit on screen 2017-08-16 02:51:00 -05:00
Scott Lahteine
30887feae3 Tweak some formatting in ABL G29 2017-08-16 02:51:00 -05:00
Thomas Moore
257b693ab0 Advanced pause fixes (#7518) 
* Disallow filament change while paused

* Use kinematic movemements in pause_print and resume_print
 2017-08-15 22:57:13 -05:00
Tannoo
ab2ac1af71 UBL_LCD_storage_corrections (#7517) 
Correcting the storage selection.
Also EEPROM error handling on the LCD.
 2017-08-15 21:01:11 -05:00
cdedwards
f1843211e6 Fix for G26 spam output 
while heating, G26 will continuously spam the heater states instead of printing it out every 5000ms.
 2017-08-15 17:04:53 -06:00
Roxy-3D
be5ca34215 Allow G29 to work correctly even if nozzle is off the mesh. (#7512) 
* work around previous regressions...
 2017-08-15 17:04:52 -05:00
Scott Lahteine
06541ec885 Merge pull request #7448 from thinkyhead/bf1_delta_fixes 
Prevent damage if DELTA_HEIGHT is set badly
 2017-08-15 16:35:09 -05:00
GMagician
e9c72978c7 Implement SERVO_DELAY as array 
This modify give SERVO_DELAY x servo basis
 2017-08-15 00:28:47 -05:00
Scott Lahteine
96ae53cf41 Use MOVE_SERVO macro where possible 2017-08-15 00:28:39 -05:00
Scott Lahteine
3be9c19f12 Hold on move axis screens 2017-08-14 22:51:47 -05:00
Scott Lahteine
8fd58cd6dc Patch goto labels for consistency 2017-08-14 22:51:47 -05:00
Scott Lahteine
75e6f72c89 Fix hexadecimal number formatting 2017-08-14 22:50:44 -05:00
Scott Lahteine
ac76101ec3 Eliminate goto in gcode_M48 2017-08-11 17:00:40 -05:00
Scott Lahteine
75e6ead5fd Eliminate goto in gcode_G33 2017-08-11 17:00:40 -05:00
Scott Lahteine
6bd63d27b5 Updates to G29 for probe error handling 2017-08-11 17:00:40 -05:00
Thomas Moore
f54e0fc90f Prevent damage if DELTA_HEIGHT is incorrect 2017-08-11 16:09:14 -05:00
Scott Lahteine
0938c62b48 Neater position_is_reachable call 2017-08-11 15:55:32 -05:00
Scott Lahteine
9d95b1b4df Tweak Conditionals_post.h 2017-08-11 15:55:32 -05:00
Scott Lahteine
35d5a7bdff Tweak CR-10 config/pins 2017-08-11 15:55:31 -05:00
Scott Lahteine
419c8969a7 Merge pull request #7479 from thinkyhead/bf1_fix_italian 
Fix Italian string length
 2017-08-10 18:42:35 -05:00
Frederik Kemner
25a11cd485 Use bed size and inset instead of travel limits to define mesh area\n\nAs proposed in #7435 (#7480) 2017-08-10 16:53:04 -05:00
Scott Lahteine
7f3406d47b Fix Italian string length 
Addressing #7264
 2017-08-10 15:41:35 -05:00
Jozsef Kiraly
97c21e9007 Support for Geeetech GT2560 Rev.A/Rev.A+ 2017-08-06 00:42:54 -05:00
Scott Lahteine
b2822a59f9 Add a sanity check for valid bed size 2017-08-05 03:49:04 -05:00
Scott Lahteine
a7e5c1bf19 Use float to init TMC2133 steps-per-mm 2017-08-05 03:48:52 -05:00
Scott Lahteine
dd66d21749 Extend DEACTIVATE_SERVOS_AFTER_MOVE sanity-check 
As proposed in #7429
 2017-08-05 03:48:52 -05:00
richarddeweerd
b370906031 Example config for Geeetech I3 Pro X with GT2560 controller 2017-08-05 03:48:52 -05:00
Scott Lahteine
804818b4d9 Bring configs up to date 2017-08-05 03:48:52 -05:00
Scott Lahteine
dd841a3675 Merge pull request #7410 from benlye/user-script-feedback 
Make audible user script feedback optional
 2017-08-05 02:59:56 -05:00
Florian Heilmann
0fd2923a9f Fix compilation with ADVANCED_PAUSE_FEATURE without SDSUPPORT (#7412) 
* Fix compilation of ADVANCED_PAUSE_FEATURE without SDSUPPORT

* Fix Identation

* Make use of IS_SD_PRINTING macro

as per @MagoKimbra
 2017-08-05 02:58:38 -05:00
benlye
24af9e1bf4 Make audible user script feedback optional 
Add a parameter to enable/disable audible user script feedback
 2017-08-04 17:24:10 +01:00
Florian Heilmann
6827a162bb Update language_de.h 
Add
MSG_BLTOUCH                    
MSG_DELTA_SETTINGS            
MSG_UBL_MESH_EDIT                
MSG_UBL_OUTPUT_MAP_BACKUP        
MSG_UBL_STEP_BY_STEP_MENU       
MSG_Z_FADE_HEIGHT
 2017-08-04 09:35:21 +02:00
Scott Lahteine
3497153cf1 Followup cleanup patch 
Fix regression in #7428
 2017-08-03 14:55:22 -05:00
Scott Lahteine
16f8c4865a Merge pull request #7409 from FHeilmann/bf_update_ru_translation 
Update Russian Translation
 2017-08-03 14:54:40 -05:00
Scott Lahteine
622048ffb0 Clean up whitespace, trailing space, bad tab conversion, etc. 2017-08-03 11:20:03 -05:00
Roxy-3D
2cbdc0ebb6 Fix large Z corrections when nozzle moves off of UBL mesh (#7415) 2017-08-02 16:51:04 -05:00
Florian Heilmann
650e5274c4 Update Russian Translation 2017-08-02 21:19:15 +02:00
Scott Lahteine
ce65c13a97 Merge pull request #7398 from fiveangle/bf_lcd_bed_level_requirements 
Clarify LCD_BED_LEVELING requirements
 2017-08-01 17:46:07 -05:00
Dave Johnson
936dfb965c Clarify LCD_BED_LEVELING requirements 
LCD_BED_LEVELING requires PROBE_MANUALLY with auto bed leveling enabled.  See #7396
 2017-08-01 14:13:54 -07:00
Kai
ffe3013bb5 Fix for #7395 
Filament change causes freeze during paused print. This PR disables Filament change in the prepare menu when a print from SD Card is paused. See #7395
 2017-08-01 21:45:41 +02:00
Øystein Krog
e948f77cf9 Fix DUAL_X_CARRIAGE not moving at all 
Axis would only move when homing.
Bug introduced in 91841d75c9.
Fixes #6956, fixes #7050 and fixes #7291
 2017-07-31 18:44:26 +02:00
Scott Lahteine
08b0456d91 Merge pull request #7379 from thinkyhead/bf_manual_bed_level_floor 
Manual Bed Leveling: Goto previous Z height at each probe point
 2017-07-30 05:41:12 -05:00
teemuatlut
936d00dda8 Implement probing delay for piezo sensors 2017-07-29 21:46:40 -05:00
Scott Lahteine
29eef360d0 Merge pull request #7308 from thinkyhead/bf_cleanup_config_adv 
Fixes for FWRETRACT
 2017-07-29 21:20:19 -05:00
Wilfried Chauveau
894608f8a3 Manual Bed Leveling: Goto previous Z height at each probe point 2017-07-29 21:15:37 -05:00
Scott Lahteine
ff06e1a030 Merge pull request #7372 from tcm0116/delta_calib_menu 
Move Delta Calibration menu to the Prepare menu
 2017-07-29 21:05:03 -05:00
Thomas Moore
15e009b6ca Move Delta Calibration menu to the Prepare menu 2017-07-28 08:33:18 -05:00
Scott Lahteine
bfd396c13a Patch to fix some compiler warnings 2017-07-28 02:27:16 -05:00
Scott Lahteine
48c5f3dddf Tweak kill action #ifdef 2017-07-27 23:42:01 -05:00
Scott Lahteine
be7a9a07c5 Don't reset grid with G29 Q + PROBE_MANUALLY 2017-07-27 22:47:43 -05:00
Scott Lahteine
dfe670247d Merge pull request #7363 from marcio-ao/bugfix-1.1.x 
Makefile fixes and U8G support.
 2017-07-27 21:31:56 -05:00
Marcio Teixeira
af83c512b8 Added support for U8G. 2017-07-27 07:49:25 -06:00
Scott Lahteine
4eff18854b Rename options with swap_ prefix 2017-07-27 04:14:29 -05:00
Scott Lahteine
14482d2f2a Strip auto-retract for impossible M(IN|AX)_AUTORETRACT combo 2017-07-27 04:14:29 -05:00
Scott Lahteine
9fc72422e4 Don't let the flow multiplier affect retract/recover length 2017-07-27 04:14:29 -05:00
Scott Lahteine
fee696db5d Improve retract() for G10/G11/autoretract 2017-07-27 04:14:29 -05:00
Scott Lahteine
423b0f3a1e Replace MIN_RETRACT with MIN_AUTORETRACT, MAX_AUTORETRACT 2017-07-27 04:14:29 -05:00
Scott Lahteine
51864fd365 Add bed size as a configuration option 2017-07-26 23:04:54 -05:00
Scott Lahteine
dc7c95e07b Remove @ section fwretract 2017-07-26 22:46:16 -05:00
Dave Johnson
4718c09c48 Remove extraneous USBCON defines for AT90USB boards 
USBCON is definied by serial.h pullikng in MarlinConfig.h which in turn pulls in Arduino.h.  Defining in later includes has shown to cause compile issues so removing all extraneous calls for and potentially easier future linker troubleshooting.
more USBCON unification
 2017-07-23 16:41:48 -07:00
C. Scott Ananian
890e7a16a9 Add support for Printrbot Neopixel RGBW strip. 
Connected as described at http://printrbot.com/shop/led-strip/

Based on patch by Kelly Anderson <kelly@xilka.com> at
http://www.xilka.com/printrbot/marlin/1.1.4/20170707/
 2017-07-22 16:07:55 -05:00
Scott Lahteine
a059e95463 Bring Infitary i3 config up to date 2017-07-21 20:49:19 -05:00
Scott Lahteine
d6d6043548 Merge pull request #7338 from thinkyhead/bf_mks_ps_on_pin 
MKS 1.3+: Add pin mapping for PS_ON
 2017-07-21 20:00:26 -05:00
Alexey Shvetsov
851f9f5399 Update Russian translation - Part 1 
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
 2017-07-21 19:32:37 -05:00
Scott Lahteine
b7a16e4468 Merge pull request #7315 from fixoid/patch-1 
Fixing SWITCHING_EXTRUDER feature to work with HOTENDS > 1
 2017-07-21 19:10:54 -05:00
Alexey Shvetsov
f38b8c5bf8 MKS 1.3+: Add pin mapping for PS_ON 
This allows the use of D4 as PS_ON since MKS Gen doesn't have a PS_ON pin. However this effectively allows only 3 servos (instead of 4).

Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
 2017-07-21 18:50:05 -05:00
Scott Lahteine
8a3bc6be4d Improve FWRETRACT config options and commentary 
Add more details as requested in #7198
 2017-07-20 22:57:50 -05:00
Scott Lahteine
b0173ccdb9 Drop extra initializers for vars initialized by EEPROM code 2017-07-20 22:57:49 -05:00
Scott Lahteine
7afafb05b8 Split G10/G11 into separate functions 2017-07-20 02:24:13 -05:00
Scott Lahteine
c45798694f Add some more requirements to the G-code list 2017-07-20 02:24:13 -05:00
Scott Lahteine
72de280c1e BARICUDA valve pressure consistently uint8_t 2017-07-20 02:21:40 -05:00
Scott Lahteine
4d98e3f0a7 General cleanup 2017-07-20 02:21:40 -05:00
fixoid
e530c67349 Fixing SWITCHING_EXTRUDER feature 2017-07-19 21:15:26 +03:00
Tannoo
2ad3ca5d8a Bugfix (#7310) 2017-07-18 22:55:14 -05:00
Roxy-3D
37a6833d7e Allow the sampled point to be added into the Least Squares Best Fit (#7289) 
Without this...  The LSF won't work because none of the sampled points
in this code block get added.
 2017-07-13 16:33:02 -05:00
C. Scott Ananian
a519b093b9 Fix build by replacing qr_solve by least_squares_fit. (#7285) 
This was broken by 9af67e2446.
 2017-07-13 12:02:15 -05:00
Scott Lahteine
0873c667fa Apply coding standards to recent merges 2017-07-13 00:46:16 -05:00
Scott Lahteine
8c2907d10f Fix ABL broken by recent change 2017-07-12 22:56:18 -05:00
Roxy-3D
9af67e2446 Save 7714 bytes of program memory when doing AUTO_BED_LEVELING_LINEAR (#7276) 
We can save more and a pile of RAM by eleminating the eqnBVector and
EqnAMatrix arrays next.
 2017-07-10 19:05:11 -05:00
Scott Lahteine
76e90b93b7 Volatile keyword not needed for parser.seen 2017-07-10 15:38:54 -05:00
Jamie Bainbridge
00e4ced58e Stay in User Menu after command. Add feedback. 
When a user executes a User Menu command, the LCD returns to the main menu. If the user has multiple menu items they want to run, such as one menu item per bed leveling corner, then it's better to stay in the User Menu rather than return to the main menu.

This PR modifies Marlin to stay in the User Menu after a command.
 2017-07-10 13:47:12 -05:00
Scott Lahteine
1066b17457 Merge pull request #7260 from thinkyhead/bf_G33_update_27 
Updates to G33 and its LCD code
 2017-07-10 13:39:36 -05:00
Tannoo
e927941c06 Bugfix (#7265) 
Fix compile error when UBL is enabled but there is no LCD Panel.
 2017-07-08 09:44:50 -05:00
Scott Lahteine
68aea9c01d Merge pull request #7261 from thinkyhead/bf_configs_by_vendor 
Arrange more example configs by vendor
 2017-07-07 15:46:22 -05:00
Tannoo
aaacef9441 Corrections (#7231) 
20x4 map integration.    Also some minor changes to the UBL Menu layout.     Both 20x4 LCD's and Graphical LCD panels should have similar functionality now.
 2017-07-07 11:05:08 -05:00
LVD-AC
4bc79ec877 Updates for G33-LCD interface 2017-07-07 05:00:59 -05:00
Scott Lahteine
186580b55f Arrange example configurations by vendor 2017-07-07 04:48:23 -05:00
Scott Lahteine
6be369f3ea Add some config names to AUTHOR 2017-07-07 04:46:33 -05:00
Scott Lahteine
7fc31a7940 Merge pull request #7258 from thinkyhead/bf_cleanups_jbrazio 
Add support for BQ heated bed kit with Hephestos 2
 2017-07-07 04:11:07 -05:00
Scott Lahteine
11e376e920 Merge pull request #7256 from thinkyhead/bf_cleanup_july_6 
Assign -1 to LCD_PINS_D4-7 if not defined
 2017-07-07 03:22:47 -05:00
João Brázio
2065591daf Add support for BQ heated bed kit with Hephestos 2 2017-07-07 03:10:38 -05:00
essgcee
61be28133d Support for Creality CR-10 
Creality board is a Melzi / Sanguinololu variant, but using different pins for LCD control (and maybe other minor variations)
 2017-07-06 23:08:10 -05:00
Scott Lahteine
9248a90a4c Assign -1 to LCD_PINS_D4-7 if not defined 2017-07-06 22:47:51 -05:00
Scott Lahteine
5ef1e5ef60 Tweaks for M43 2017-07-06 21:47:50 -05:00
Scott Lahteine
c7732db99d Fix: Use of digitalRead, digitalWrite breaks on AT90USB 2017-07-06 21:25:56 -05:00
Scott Lahteine
f713f25fa5 Clean up excess whitespace 2017-07-06 21:24:30 -05:00
Scott Lahteine
fc9ce65095 Add BUSY_WHILE_HEATING for hosts that need it 2017-07-06 16:28:57 -05:00
Scott Lahteine
c6d430670a Clear SHOW_BOOTSCREEN with no LCD 2017-07-06 14:21:27 -05:00
Scott Lahteine
11c589c3ec Fix compile issue with G38 
Fixes #7250
 2017-07-06 14:21:27 -05:00
Scott Lahteine
678914be25 Patch M23 to work around Simplify3D bug 
Addressing #7227
 2017-07-06 14:00:58 -05:00
LVD-AC
3efe4aeef8 Add PROBE_MANUALLY support to G33 2017-07-04 18:06:54 -05:00
Scott Lahteine
cca1cca3a5 Merge pull request #7237 from thinkyhead/bf_cz_mapper 
UTF-8 mapper for Czech
 2017-07-04 16:45:13 -05:00
Scott Lahteine
a2babb532d Merge pull request #7217 from benlye/add-kill-action 
Add configurable action command to send when printer is killed
 2017-07-04 16:44:08 -05:00
Petr Zahradník
8c34233452 UTF-8 mapper for Czech 2017-07-04 15:51:23 -05:00
Dave Johnson
20f6676d63 DISABLE_[XYZ] compatibility check 
DISABLE_[XYZ] is incompatible with HOME_AFTER_DEACTIVATE and Z_SAFE_HOMING
 2017-07-03 17:23:53 -07:00
Ben Lye
c28749a567 Add kill action 
Sends pre-defined string as action command when printer is kill.
 2017-07-03 23:45:19 +01:00
Scott Lahteine
df87278fce Add "CAP:PRINT_JOB:1" (M75 / M76 / M77) to M115 output 2017-07-03 15:59:06 -05:00
Scott Lahteine
4be8d7720e Fix spelling of "Chinese" 2017-07-03 15:24:49 -05:00
LVD-AC
567941e341 Fix for issues #6997 and #7152 
Probing with the effector in the printing area, but an eccentric probe (e.g. allen key) outside it but still touching the bed gives meaninfull information for calibration. Since calibration is most accurate when probing as close to the towers as possible the testing was way to restrictive hence this fix.
 2017-07-03 02:53:49 -05:00
Scott Lahteine
57fff2e95e Merge pull request #7219 from thinkyhead/bf_update_git_scripts 
Update Marlin+git helper scripts
 2017-07-03 01:49:27 -05:00
Scott Lahteine
6a3967ee33 Corrections for probe_pt parameters 2017-07-03 01:34:27 -05:00
Scott Lahteine
534bffa7a9 Correct comment on ABL G29 2017-07-03 01:13:07 -05:00
Scott Lahteine
e1e1a0c344 Provide a default CUSTOM_BOOTSCREEN_TIMEOUT 2017-07-03 01:13:07 -05:00
Scott Lahteine
69297b2d7b Make all EEPROM optimization options available 2017-07-02 20:47:03 -05:00
Scott Lahteine
d609489b22 Drop setup_homepin 2017-07-02 02:27:09 -05:00
Scott Lahteine
167169e1bf Sanity check for a real probe with M48 2017-07-02 02:27:09 -05:00
Scott Lahteine
395a9f59ac Merge pull request #7211 from thinkyhead/bf_lcd_bootscreen 
Use lcd_bootscreen for both
 2017-07-02 02:11:07 -05:00
Scott Lahteine
14663efe0d Merge pull request #7210 from fiveangle/printrboard_revf_cleanup 
Printrboard RevF cleanup
 2017-07-02 01:02:26 -05:00
Scott Lahteine
ae5923a3d0 Make lcd_bootscreen common to both 2017-07-02 00:47:36 -05:00
Scott Lahteine
859248433f Patch for gcode debug 2017-07-02 00:47:35 -05:00
Dave Johnson
09c90c2f6c Printrboard RevF Cleanup 
-Update Arduino IDE extension descriptions
-Set default motor currents if not defined in Configuration_adv.h
-Support for MINIPANEL LCD
-Support for choosing internal or panel SD
 2017-07-01 22:33:39 -07:00
Scott Lahteine
232a10410d LCD_FOR_MELZI 2017-07-01 22:32:20 -05:00
Scott Lahteine
76c92a1fab Clean up some trailing spaces 2017-07-01 22:32:20 -05:00
Scott Lahteine
cf96109056 Implement the EEPROM_CHITCHAT option 2017-07-01 21:48:18 -05:00
Scott Lahteine
dcec7178d1 Expose DISABLE_M503 option as a test option 2017-07-01 21:31:28 -05:00
Scott Lahteine
3e78a01262 Merge pull request #7204 from thinkyhead/bf_update_ubl_lcd 
UBL radar map corrections
 2017-07-01 20:59:03 -05:00
Tom
1ff7d10c80 Add configuration for Infitary M508 (i3 clone) 
Based on Infitary's own firmware settings.
 2017-07-01 20:04:08 -05:00
Scott Lahteine
4cb45c10dd Patch ubl lcd mesh map indentation 2017-07-01 19:47:52 -05:00
Scott Lahteine
abd6ba62b4 Some cleanups for ubl lcd mesh map 2017-07-01 19:47:49 -05:00
Scott Lahteine
f17bae1f70 Changes for ubl_lcd_map_control patch 2017-07-01 19:47:02 -05:00
Tannoo
8e0f3b7eba UBL radar map corrections 2017-07-01 19:00:44 -05:00
Bob-the-Kuhn
fcceed5be6 intermittent Teensy & G26 compile problem 
===============================================

also an issue with ubl_motion.cpp
 2017-07-01 14:41:24 -05:00
Scott Lahteine
30b327d24c Finish the solution for #7166 2017-06-29 15:17:39 -05:00
Scott Lahteine
6c97c5595c Add a sanity check for DELTA_AUTO_CALIBRATION 2017-06-29 15:03:19 -05:00
Bob-the-Kuhn
e6e3132f79 make LETTTER_OFF return values that match param indices range 2017-06-29 09:01:58 -05:00
Bob-the-Kuhn
bfbf5f8200 correct value_bool() when FASTER_GCODE_PARSER is enabled 
Also corrected compile issue when DEBUG_GCODE_PARSER and
AUTO_BED_LEVELING_UBL are both enabled.
 2017-06-28 19:51:08 -05:00
Scott Lahteine
406ef69702 Move Anet A8 config to subfolder 2017-06-28 16:58:57 -05:00
Scott Lahteine
379926961c Add Anet A6 config, edit Anet A8 config 2017-06-28 16:58:57 -05:00
Scott Lahteine
5b03f23fa2 Bring configurations up to date, fix some comments 2017-06-28 16:41:49 -05:00
Scott Lahteine
e3cedfa0ec Fix a compiler warning 2017-06-28 16:41:46 -05:00
Scott Lahteine
bb0508b6cf Fix comment in M115 code 2017-06-28 13:08:33 -05:00
Scott Lahteine
85777a56c6 Add A (action) and E (echo) parameters to M118 2017-06-28 02:07:59 -05:00
Scott Lahteine
d1e8d4cd9d Merge pull request #7167 from thinkyhead/bf_20x4_lcd_update 
UBL Map Cleanup and LCD display
 2017-06-28 01:20:22 -05:00
Scott Lahteine
b492e0878d Changes to reduce and simplify 2017-06-28 01:10:30 -05:00
Ben Lye
98d362c2da Adding M118 command to send text to serial 
Allows the user to send text to the serial console in order to
communicate with a host - sending debuging information or action
commands, for example.  Text must begin with '//' and this is added if
it is not already present at the beginning of the string.
 2017-06-28 00:55:20 -05:00
Tannoo
80abc872f3 Updated to better support the coming "radar" 2017-06-27 22:51:58 -05:00
Tannoo
e90cbf5c16 UBL Map Cleanup 2017-06-27 22:51:58 -05:00
Scott Lahteine
fc140c4962 Followup for I2C_POSITION_ENCODERS 2017-06-27 20:46:40 -05:00
Scott Lahteine
f4246dc8ff Merge pull request #7165 from thinkyhead/bf_parser_shorthand 
Use parser.seenval, add shorthand functions
 2017-06-27 18:57:48 -05:00
Scott Lahteine
bd776df8c1 Optimize seen_axis by moving 'X' to index 24 2017-06-27 18:47:11 -05:00
Scott Lahteine
05449cf6ee Add shorthand value accessors to gcode.h 2017-06-27 18:39:41 -05:00
Scott Lahteine
12f092c812 Cleanups to gcode.h, use seenval() 2017-06-27 17:57:00 -05:00
Scott Lahteine
941943c167 Apply const, spacing, etc. 2017-06-27 05:23:49 -05:00
Scott Lahteine
5b11b33854 Add support for Průša MK2 Multiplexer 2017-06-27 04:55:30 -05:00
Scott Lahteine
a4a587a897 Fix spelling of Průša 2017-06-27 04:46:46 -05:00
Scott Lahteine
ba1706a265 Fix spacing in gcode.cpp 
Followup to #6940
 2017-06-27 04:46:46 -05:00
Scott Lahteine
c2c8aafda2 Merge pull request #7157 from thinkyhead/bf_g33_f_parameter 
G33 F and Height bug fix
 2017-06-27 04:36:22 -05:00
Scott Lahteine
627afb29df Merge pull request #7109 from tnw513/fix-italian 
added missing italian translation
 2017-06-27 04:12:30 -05:00
Scott Lahteine
f0f9fb7465 Remove line that does nothing 2017-06-27 04:08:50 -05:00
LVD-AC
99592c8458 Update G33: Add F, fix height bug 2017-06-27 04:02:02 -05:00
Ben Lye
31514f453a Fix #ifdef AVR_AT90USB1286_FAMILY in pinsDebug 
Can't compile with PINS_DEBUGING enabled on Atmega1284p because it tries
to enumerate pins 46 and 47 (which don't exist) because `#ifdef
AVR_AT90USB1286_FAMILY ` doesn't work as expected.
 2017-06-27 08:04:40 +01:00
Scott Lahteine
134116b874 Merge pull request #7153 from thinkyhead/bf_czech_update 
Updated Czech language
 2017-06-26 17:34:15 -05:00
Petr Zahradník
e80958b631 CZ Translate BLTouch and UBL 
Fixup length
 2017-06-26 16:15:31 -05:00
Scott Lahteine
fe7e890b09 Fix issues with ADC_KEYPAD 
Fixes #7150
 2017-06-26 16:08:31 -05:00
dot-bob
a1632cfa0a Added option 'H' to G29 P4. 
- Added `H` to set a nozzle height adjustment to surface of the bed.
- Updated G29 P4 comments to reflect changes.
 2017-06-25 17:14:08 -05:00
Scott Lahteine
e687782875 Merge pull request #7134 from thinkyhead/bf_skynet_a3_ready 
Add Skynet/ANET A10 support
 2017-06-25 14:35:22 -05:00
dot-bob
b3c36c98fd Edit digipot currents via LCD, save to EEPROM 2017-06-25 01:02:36 -05:00
Scott Lahteine
3c7bfe798d Various cleanups ahead of digipot save 2017-06-24 23:56:24 -05:00
Bob-the-Kuhn
9651d01e1a Add Skynet/ANET A10 support 2017-06-24 19:07:03 -05:00
Scott Lahteine
eb314373bb Config spacing & consistency, group custom LCDs 2017-06-24 14:33:40 -05:00
Scott Lahteine
6c45fa7dcc Apply #elif in LCD conditionals 2017-06-24 13:56:33 -05:00
Scott Lahteine
afbc6e3e2f Update DELTA/SCARA config comments 2017-06-24 12:47:17 -05:00
Paweł Stawicki
1e47c17b46 Fix: set digipot mcp4018 Vrefmax to 1.666V 2017-06-24 12:35:34 -05:00
Scott Lahteine
80a232419d CNC workspace planes and 'P' argument for G2/G3 2017-06-23 14:53:03 -05:00
Scott Lahteine
5fb0d401eb Formatting tweaks 2017-06-23 14:53:02 -05:00
Scott Lahteine
ed04d0b6be Label DualXMode enums 2017-06-23 14:53:02 -05:00
Scott Lahteine
786cdea124 Ensure REPRAPWORLD_KEYPAD_MOVE_STEP is defined 2017-06-23 14:53:01 -05:00
Scott Lahteine
ee7163fd3a Fix pinsDebug compile errors 2017-06-23 14:53:01 -05:00
Scott Lahteine
a9f8e518bf Fix FILAMENT_WIDTH_SENSOR infinite loop issue 
Addressing #6992 and #5851
 2017-06-23 14:53:01 -05:00
Scott Lahteine
254a11b083 Merge pull request #7120 from thinkyhead/bf_sainsmart_link 
Add link to F. Malpartida LiquidCrystal library
 2017-06-22 14:04:23 -05:00
Scott Lahteine
aeb6d465a4 Merge pull request #7118 from thinkyhead/bf_french_update 
French update
 2017-06-22 13:10:07 -05:00
Bob-the-Kuhn
325f09ea6c Add link to custom LiquidCrystal library by F. Malpartida 2017-06-22 13:07:08 -05:00
MagoKimbra
d26c8cc5c8 fix_planner_refresh_e_positioning (#7103) 
* fix_planner_refresh_e_positioning

* Fix
 2017-06-22 12:59:22 -05:00
Gege2B
c7f04fbcc7 French translation 2017-06-22 12:49:23 -05:00
Silvio Didonna
4171520729 added missing italian translation 2017-06-21 11:08:39 +02:00
Bob-the-Kuhn
41bfff14e2 Merge pull request #6991 from Bob-the-Kuhn/Mesh-with-babystepping 
Mesh with BABYSTEP_ZPROBE_OFFSET: add sanity check
 2017-06-20 16:36:22 -05:00
Scott Lahteine
424d0bae8b Merge pull request #7100 from thinkyhead/bf_HAL_prepare 
Apply maths macros and type changes ahead of HAL
 2017-06-20 01:15:23 -05:00
Scott Lahteine
5c59ee4e93 Use current (raw) Z if omitted from G29 WXY or G29 WIJ. 2017-06-20 00:10:52 -05:00
Scott Lahteine
37bc0fce62 Make G29 compatible with M206 Z and G92 Z 
Use the raw position for mesh measurement. Otherwise the `M206` and
`M92` Z offsets will get canceled out by bed leveling. The downside is
`G29` will not compensate for a poorly set small `M206` fudge value.

To elaborate on this issue, imagine you are probing with a Z home
offset of -0.1, meaning when Z homes, -0.1 is the current position,
implying the ideal bed zero for the nozzle is 0.1mm higher than the Z
endstop. Ordinarily when printing, Z would raise 0.1mm higher.

What happens when we probe is that all points are measured with that
-0.1 included. So when bed leveling is enabled the `M206 Z` offset gets
exactly canceled out by the bed readings.
 2017-06-20 00:09:59 -05:00
Scott Lahteine
6c45d0fd81 Apply maths macros and type changes ahead of HAL 2017-06-19 22:57:42 -05:00
Scott Lahteine
8a51e2960c Improve the experience of editing steps_per_mm 2017-06-19 22:17:15 -05:00
Scott Lahteine
725d9d9a56 Fix and improve LCD value editing display 
- Fix: When "100.0" changes to "99.0" the LCD shows "199.0"
- Use 2 rows if needed on character LCD, (allowing longer labels…
Germany, et. al.)
- Known issue: A certain length label combined with a certain value
drawing function could, for example, display 99.0 on 1 line, but 100.0
on two lines. Workaround would be to pass a nominal value size argument.
 2017-06-19 22:17:15 -05:00
Scott Lahteine
499bb85a95 Clean up, put ubl menu itemization closer at hand 2017-06-19 22:17:14 -05:00
Tannoo
90f5f82926 Step-by-Step Menu addition 2017-06-19 20:15:11 -05:00
Scott Lahteine
0c616700f3 Merge pull request #7097 from thinkyhead/bf_dac_percents_fix 
Convert DAC percent to uint8_t
 2017-06-19 17:58:55 -05:00
Florian Heilmann
6dcf42f1a7 Add Z Fade Height to M420 output if it is enabled (#7042) 
* Add Z Fade Height to M420 Output

Echo the z-fade height when M420 is called, if it is enabled.

* Fix Whitespace

* Fix Compiler complaint

* Missing semi-colon
 2017-06-19 17:53:07 -05:00
Bob-the-Kuhn
a1c65fd3d5 convert DAC percent to uint8_t 
=====================

add test to Travis
 2017-06-19 17:46:41 -05:00
Scott Lahteine
907cafcbfd Support for two switching extruders 2017-06-19 17:20:59 -05:00
Ross Allan
cfcd069501 Fix #5699 - LIN_ADVANCE freeze when ADV_RATE returns 0 2017-06-19 14:02:17 -05:00
Scott Lahteine
b8b7ef1902 Merge pull request #7090 from thinkyhead/bf_italian_refix 
Fix Italian language mapper
 2017-06-19 09:27:13 -05:00
Scott Lahteine
42f7f9e013 Merge pull request #7060 from bgort/i2cpefix 
I2C Position Encoders Example Configs
 2017-06-19 01:08:42 -05:00
Scott Lahteine
0b49bddec2 Fix Italian language mapper 2017-06-19 01:01:40 -05:00
Silvio Didonna
2e26a7c752 Added missing Italian translations 2017-06-18 23:37:48 -05:00
Scott Lahteine
4c3dc8bf07 Remove set_current_to_destination from resume_print 
Addressing #7057
 2017-06-18 23:01:13 -05:00
Scott Lahteine
4857a3ba48 Formatting and spelling 2017-06-18 23:01:12 -05:00
Thomas Moore
3d24c329af M600 fixes 2017-06-18 23:00:56 -05:00
Bob-the-Kuhn
8fb30aaed6 warn user of an invalid combination 2017-06-17 15:04:47 -05:00
Bob-the-Kuhn
6cb9bb27fe Move lcd_refresh_zprobe_zoffset definition 2017-06-16 21:46:33 -05:00
Scott Lahteine
d4270f15a9 Spacing tweak in setup() 2017-06-16 14:21:05 -05:00
Scott Lahteine
c61c0a9aeb Fix status message missing "blink" 2017-06-16 14:18:19 -05:00
Scott Lahteine
062131554f Followup to #7045 2017-06-16 14:18:19 -05:00
Jim Brown
3d043976f7 Add option to disallow filament change without homing first 2017-06-16 13:32:17 -05:00
Scott Lahteine
93da4e83f7 One more space on a short status message 2017-06-16 12:58:25 -05:00
Scott Lahteine
7c95f762f2 Show LCD bed options even without thermal protection 2017-06-15 15:29:56 -05:00
Scott Lahteine
92eb55f246 Reject generous donation of trailing whitespace 2017-06-15 15:25:24 -05:00
Scott Lahteine
428be27893 Formatting adjustments 2017-06-15 15:25:24 -05:00
Scott Lahteine
8d5a37fb3d Support for a 5th stepper in stepper code 2017-06-15 15:25:23 -05:00
Scott Lahteine
7769a22064 Tweaks to temperature code 2017-06-15 15:25:23 -05:00
Scott Lahteine
d9da126776 Cleanups for UBL / ultralcd.cpp 2017-06-15 15:22:36 -05:00
Scott Lahteine
499d5c3b24 Fix scrolling lcd message for DOGM 2017-06-15 15:07:39 -05:00
Scott Lahteine
7164fd499e Tweak to G33 P error 2017-06-15 14:43:40 -05:00
Scott Lahteine
c10d763d98 Simpler prepare move conditions 2017-06-15 14:43:40 -05:00
Scott Lahteine
4ebff8eaa5 Drop fastio timer cruft 2017-06-15 14:43:40 -05:00
Scott Lahteine
09bc34f4dc Allow arbitrarily long retraction 2017-06-15 14:43:30 -05:00
Scott Lahteine
4414825e0d Merge pull request #7038 from thinkyhead/bf_PCA9632 
PCA9632 PWM color LED support
 2017-06-15 14:41:24 -05:00
Bob-the-Kuhn
9dda022705 fix compile errors 
================================

Changed to conditional compile for AT90USB issue
 2017-06-15 13:18:14 -05:00
Bob-the-Kuhn
b3338ccb01 Merge pull request #6954 from Bob-the-Kuhn/Software-SPI-for-all-CPUs 
SD card soft SPI - allow all CPU families to use it
 2017-06-15 01:03:39 -05:00
Brian
40bb0cbf7a example configurations, etc. 2017-06-14 18:04:28 -04:00
Jim Brown
26d20ebcfc Don't allow filament change without homing first (#7054) 2017-06-13 17:11:37 -05:00
Roxy-3D
824f71d503 LCD Panel Interactive Mesh Editing (#7045) 
Original Mesh Bed Leveling replacement put at top of UBL Menu Options to
help facilitate the removal of the Original Mesh Bed Leveling.

Radar display (and control) of the UBL Interactive Mesh Editing.
 2017-06-12 18:26:49 -05:00
Scott Lahteine
445227c807 Fix missing LCD_STR_REFRESH 2017-06-12 01:28:52 -05:00
Scott Lahteine
699aa35df6 Code cleanup for G33 2017-06-12 01:25:40 -05:00
dot-bob
0bc66bf22c PCA9632 PWM color LED support 
Add support for the PCA9632 PWM color LED driver used on the Ultimaker 2 and Wanhao Duplicator 6.
 2017-06-12 01:09:24 -05:00
Luc Van Daele
896dfa0577 G33 eccentric probe fixes (#6850) 
* excentric probe config fix

* undo last commit

* eccentric probe fix

* oops

* !stow after each probe

* deploy/stow fix

* E parameter + bit of cleanup

* comment

* LCD menu fix
 2017-06-12 01:07:19 -05:00
Thomas Moore
e47029199e Remove ADVANCED_PAUSE_FEATURE requirement for PROBING_HEATERS_OFF (#7000) 
* Remove ADVANCED_PAUSE_FEATURE requirement for PROBING_HEATERS_OFF

* Add HEATER_IDLE_HANDLER conditional
 2017-06-12 00:22:31 -05:00
Scott Lahteine
8326c1c279 Merge pull request #7005 from Diederikvanderpant/bugfix-1.1.x 
added shift register pins for reprapworld keypad v1.1
 2017-06-11 23:12:11 -05:00
Scott Lahteine
07f8da36d2 CL-260 configs 2017-06-11 19:40:13 -05:00
Scott Lahteine
dce665a083 Merge pull request #7025 from magnuspub/patch-1 
Mod in language_it.h
 2017-06-11 19:09:46 -05:00
Scott Lahteine
7b09ab6bda Merge pull request #7033 from Bob-the-Kuhn/pinsDebug-&-dac_mcp4728-fixes 
Fix pinsDebug problem & add capability to display more than 70 pins
 2017-06-11 19:09:09 -05:00
Scott Lahteine
5bdb4bbc5e Merge pull request #7030 from thinkyhead/bf_circular_scroll 
Circular scrolling of the status message
 2017-06-11 19:07:38 -05:00
Federico
772275ab0c Create language_it.h 2017-06-11 10:37:34 +02:00
Bob-the-Kuhn
11e28f389e fix pinsDebug.h error, add capability to display more than 70 pins. 2017-06-10 22:01:15 -05:00
Scott Lahteine
21217d53df Circular scrolling of the status message 2017-06-10 20:56:00 -05:00
Scott Lahteine
da8e946efb Reduce size of heater state print code 2017-06-10 20:26:17 -05:00
Scott Lahteine
dde8bb7c8b Fix extrude_min_temp compiler warning 2017-06-10 20:07:36 -05:00
Scott Lahteine
83263076dc Merge pull request #7014 from fiveangle/fix_get-set_DrvPct_declarations 
fix get/setDrvPct declarations
 2017-06-10 19:06:50 -05:00
Scott Lahteine
57a51fd5db Tweak some else clauses 2017-06-10 16:40:10 -05:00
Scott Lahteine
fc89de6d8b Followup to German language update 2017-06-10 16:27:39 -05:00
Federico
92011e3d8c Create language_it.h 2017-06-10 21:50:14 +02:00
Dave Johnson
7864b133a8 Fix get/setDrvPct declarations 2017-06-09 20:21:28 -07:00
Scott Lahteine
0b6b7c9c7e Merge pull request #7013 from thinkyhead/bf_german_update 
Update language_de.h
 2017-06-09 21:41:19 -05:00
Scott Lahteine
f17a3c2474 Merge pull request #6889 from thinkyhead/bf_at90usb_mapping 
Unify all AVR90USB pin mappings
 2017-06-09 21:00:13 -05:00
Kai
5a72b6818e update language_de.h 
Following #6990 some more translations and some grammar fixes
 2017-06-09 19:45:09 -05:00
Scott Lahteine
4cc5444144 Merge pull request #7008 from Bob-the-Kuhn/Z_MIN_PROBE_ENDSTOP-and-Z_MAX_PIN 
Can't use "#define Z_MIN_PROBE_PIN Z_MAX_PIN" in configuration.h
 2017-06-09 19:42:56 -05:00
Scott Lahteine
51bc50214a Save 8 bytes of SRAM 2017-06-09 19:20:16 -05:00
Scott Lahteine
748bf32388 Unify AVR90USB: pinsDebug changes 2017-06-09 19:20:16 -05:00
Scott Lahteine
5426fc1735 Unify AVR90USB: Pins cleanup 2017-06-09 18:48:12 -05:00
Scott Lahteine
87d8223251 Unify AVR90USB: Pins remap to Arduino 2017-06-09 18:48:12 -05:00
Scott Lahteine
b378deaf89 Unify AVR90USB: fastio changes 2017-06-09 18:21:57 -05:00
Scott Lahteine
e94f79ccea Patch some serial macros 2017-06-09 17:17:23 -05:00
Scott Lahteine
d91710e9aa Followup for UBL translated strings 2017-06-09 16:59:26 -05:00
Scott Lahteine
761df686bd Minor cleanup in gcode.h 2017-06-09 16:59:26 -05:00
Thomas Moore
897bc2ac1f Updates for ensure_safe_temperature (#6963) 
* Updates for ensure_safe_temperature

* M600 fixes
 2017-06-09 15:19:08 -05:00
Bob-the-Kuhn
1c107b3949 delete problem line 2017-06-09 11:53:36 -05:00
Diederik van der Pant
5b270417ed added shift register pins for reprapworld keypad v1.1 
I recently upgraded my Marlin to V1.1.x and decided to publish my fix to make marlin compile properly when #define board megatronics 2 in combination with #define reprapworld keypad v1.1. It was previously described in the comments of a closed pull request. MarlinFirmware#472. All the buttons on the keypad are now operational.
 2017-06-09 14:17:47 +02:00
bgort
2f55870edb [New Feature] I2C position encoder support (#6946) 
* [New Feature] I2C position encoder support

I plan to continue improving/cleaning this up, as there areas that need work.

* let the cleanups begin.

* progress

* more progress

* comments, rename files, etc.

* clean

* Cleanups per thinkyhead

* a few more cleanups

* cleanups, bugfixes, etc.

* remove unnecessary passes_test(), additional cleanups/optimizations

* cleanups

* misc.

* Fix up I2CPEM.init() and a few other things.

* organize, fix, rename, etc.

* more optimization

* a few more tweaks
 2017-06-09 08:06:23 -04:00
Bob-the-Kuhn
28d72f48f1 change to DWORD 2017-06-08 16:15:02 -05:00
Bob-the-Kuhn
8d1d9040b6 add static 2017-06-08 14:59:21 -05:00
Bob-the-Kuhn
a17ffe1ece Merge pull request #6985 from Kaibob2/patch-1 
Fix for #6980 (case_light compile problem when EXTENDED_CAPABILITIES_REPORT is enabled)
 2017-06-08 11:18:56 -05:00
Tannoo
731c8e6372 Translatable Strings for ubl_G29 (#6990) 2017-06-08 10:09:39 -05:00
Kai
abb6b8ad54 update language_de.h (#6986) 
There was quite a lot to translate this time. I'm not absolutely confident with the whole UBL stuff and it's a PITA to translate. I don't use any kind of levelling myself as i just have a perfectly level cast aluminium plate as bed.
So maybe someone who really uses it might take a closer look at it after it's merged.
 2017-06-08 10:04:52 -05:00
Kai
c2eff60d3f Fix for #6980 
Line 7830 prevented successfull compilation when #define CASE_LIGHT_ENABLE is uncommented
 2017-06-08 09:19:04 +02:00
Scott Lahteine
1419126721 Merge pull request #6965 from thinkyhead/bf_save_more_sram 
Use createChar_P to save SRAM in bootscreen
 2017-06-07 17:34:19 -05:00
Scott Lahteine
a453be7357 Merge pull request #6973 from bgort/autoreportT 
Enable AUTO_REPORT_TEMPERATURES by default
 2017-06-07 17:33:40 -05:00
Scott Lahteine
1d615e0a67 Merge pull request #6976 from Tannoo/Leveling_in_About_Printer 
Leveling type in About Printer
 2017-06-07 17:26:21 -05:00
Scott Lahteine
707707d71a Fix LCD status message padding 2017-06-07 16:07:38 -05:00
Scott Lahteine
e556ab1dff Find three-point leveling points on Delta 2017-06-07 16:07:38 -05:00
Scott Lahteine
a27b08e6af Various code style tweaks 2017-06-07 16:07:38 -05:00
Scott Lahteine
dac29e0f75 Cleaner failure of UBL without EEPROM 2017-06-07 16:07:38 -05:00
Scott Lahteine
9128d9ab45 Improve sanity checks with static_assert, organize 2017-06-07 16:07:38 -05:00
Scott Lahteine
6bb05c4543 Save 20b in smart_fill_mesh with PROGMEM 2017-06-07 16:07:38 -05:00
Scott Lahteine
b7dc4d9973 Save 92b PROGMEM, 14b SRAM with extruder auto fan 2017-06-07 16:07:38 -05:00
Scott Lahteine
c9e3caf928 Save lots of PROGMEM, ~20b SRAM with DIGIPOT_I2C 2017-06-07 16:07:38 -05:00
Scott Lahteine
4134a6b526 Save 88b PROGMEM, 48 bytes SRAM in settings.reset 2017-06-07 16:07:38 -05:00
Scott Lahteine
36cc03a9b4 Save 224b PROGMEM, 48b SRAM in get_homing_bump_feedrate 2017-06-07 16:07:38 -05:00
Scott Lahteine
2a41f0ff84 Save 28b PROGMEM in ultralcd.cpp (line_to_current) 2017-06-07 16:07:38 -05:00
Scott Lahteine
e6d10f6ddd Spend 48b PROGMEM to save 16b SRAM 
...by moving `homing_feedrate_mm_s` to PROGMEM.
 2017-06-07 16:07:38 -05:00
Scott Lahteine
97e13a30ba Save over 100 bytes SRAM in pin_is_protected 2017-06-07 16:07:38 -05:00
Scott Lahteine
45c74406cf Recover 32 bytes of SRAM in Marlin bootscreen code 2017-06-07 16:07:38 -05:00
Scott Lahteine
e1c5a43247 Cleanup stepper current control config options 2017-06-07 16:07:38 -05:00
Scott Lahteine
efc198f952 Spacing, const, comments 2017-06-07 16:07:38 -05:00
Scott Lahteine
4406fba994 Fixes #6975 2017-06-07 11:14:30 -05:00
Scott Lahteine
d28f5d8a78 Fix: z_endstop_adj is never initialized 2017-06-07 10:29:56 -05:00
Scott Lahteine
5d5ff36446 Fix a compile error with _lcd_set_z_fade_height 2017-06-07 10:29:56 -05:00
Tannoo
b88957e0d4 Leveling type in About Printer 
Show the Leveling system in use on the About Printer screen.
 2017-06-07 06:28:33 -06:00
Brian
dd071a4a65 Enable AUTO_REPORT_TEMPERATURES by default 2017-06-07 02:52:35 -04:00
bgort
8db1197c9b Enable extended capabilities report by default (#6969) 
Ref #5139
 2017-06-07 02:36:34 -04:00
bgort
82e662fc69 Remove requirement for LCD when UBL is used. (#6971) 
* Remove requirement for LCD when UBL is used.

* fix previous oversights

* further refinement - error messages for P2 & P4

* require R on G26 when not using LCD; default to all points
 2017-06-07 02:24:36 -04:00
Tannoo
2c2b991b59 UBL Manual Build Menu Option (#6972) 
One click option to manually build UBL mesh.
 2017-06-06 22:14:18 -05:00
Roxy-3D
0dd0033b33 Save up to 94 bytes of RAM on 20x4 LCD Display machines (#6964) 
* Save up to 94 bytes of RAM on 20x4 LCD Display machines

Moved the custom screen characters out of RAM into Program Memory.  With
SD-Card support and the Progress Bar enabled, this saves 94 bytes of RAM
memory.

This was tested using the example_configurations/FolgerTech-i3-2020
files.  So a couple small changes to those files snuck into this Pull
Request.

Probably...  We can find similar savings in the Graphics LCD code it we
comb through it.   And if so...  That is the place we really need to
save RAM memory!

* Tidy up white space and indentation
 2017-06-05 17:02:00 -05:00
Bob-the-Kuhn
ba0bd33c38 Removed check for 2560 family 2017-06-04 22:16:27 -05:00
Scott Lahteine
04b07a6ecc Unused var in Stepper 2017-06-04 17:25:16 -05:00
Scott Lahteine
eb8af486d2 Ensure safe temperature for M600 2017-06-04 17:25:16 -05:00
Scott Lahteine
bfe7fbe5c0 Maintain message scroll rate 2017-06-04 17:25:15 -05:00
Scott Lahteine
6411d65c48 Fix Morgan SCARA S2 calculation 2017-06-04 12:24:09 -05:00
Scott Lahteine
46752588b9 Merge pull request #6948 from Bob-the-Kuhn/redundant_temperature 
fix redefinition errors for redundant_temperature
 2017-06-04 12:16:09 -05:00
Scott Lahteine
5938dae200 Merge pull request #6950 from MagoKimbra/fix_g29_3_point 
Fix G29 with 3 point
 2017-06-04 12:15:44 -05:00
Scott Lahteine
c5e0f08e35 Merge pull request #6951 from fixoid/patch-4 
Initializing extruder/nozzle servo when turning on the printer
 2017-06-04 12:13:05 -05:00
Scott Lahteine
e4937b0285 Cleanup of spacing and formatting 2017-06-04 11:31:43 -05:00
fixoid
1aab9906e6 Initializing extruder/nozzle servo when when turning on the printer 2017-06-04 16:57:24 +03:00
MagoKimbra
663ff7f92a Fix G29 with 3 point 2017-06-04 14:39:31 +02:00
oldmcg
9f295581f0 Ubl delta fixes and improvements (#6941) 
* Change all direct changes of ubl.state.active to
  set_bed_leveling_enabled() which handles apply/unapply
  leveling to maintain current_position consistency.

Fix invalidation of UBL mesh to invalid unreachable
  mesh points as well (delta corners).

Fix UBL_DELTA unapply_leveling logic and when
it gets applied, including fade_height changes.

Add optional M114 D for detailed position information,
disabled from compilation by default (M114_DETAIL).

* UBL_DELTA raw and inline kinematics

* UBL planner fall through fix

* consistent variable names

* Cleanup orphaned code and whitespace changes.
Use _O2.

* compile warnings cleanup

* Remove redundant #ifdef condition
 2017-06-03 17:11:43 -05:00
Bob-the-Kuhn
c34d7a29a6 fix redefinition errors for redundant_temperature 
Removing redundant_temperature from public section and leaving it in the
private section
 2017-06-03 16:40:14 -05:00
Bob-the-Kuhn
6a5d3b580d fix "hex_address not defined" when UBL is enabled 2017-06-03 13:19:55 -05:00
Scott Lahteine
789b2928a8 Tweak scrolling message code 2017-06-02 23:45:53 -05:00
Scott Lahteine
fc7d7f87b4 Init probe test pin with FastIO 2017-06-02 23:45:52 -05:00
Scott Lahteine
0282452cea Make Parser::seen volatile 2017-06-02 23:45:52 -05:00
Scott Lahteine
9a305a467b Patch LCD Contrast menu item 2017-06-02 23:45:52 -05:00
Scott Lahteine
90ccac4bcf Clean up after recent commits 2017-06-02 23:45:52 -05:00
Bob-the-Kuhn
2130f10de8 allow space between parameter and value 2017-06-02 19:57:22 -05:00
Bob-the-Kuhn
ebda4663c3 for discusion 2017-06-02 19:42:43 -05:00
FATALHERMIT
911079104e Support for ZRIB v2.0 Control Board 2017-06-02 12:05:46 -05:00
Scott Lahteine
65a0212866 Easier override of FILWIDTH_PIN 2017-06-02 12:05:46 -05:00
Scott Lahteine
147d9d76fc Merge pull request #6928 from Bob-the-Kuhn/Fix-case-light-logic-on-Azteeg-X3-boards 
Fix case light logic on Azteeg_X3 boards.
 2017-06-01 20:14:15 -05:00
guntherv73
4288c4fb4f Configurations for Malyan M150 2017-06-01 19:26:29 -05:00
Scott Lahteine
1919cb0d1e Config cleanups 2017-06-01 19:26:16 -05:00
Bob-the-Kuhn
9a9bbfc57c Fix case light logic on Azteeg_X3 boards. 2017-06-01 12:33:24 -05:00
Thomas Moore
a32f7b329c Fix heater status display for advanced pause 2017-06-01 12:29:47 -05:00
Scott Lahteine
445865ea03 REPRAPWORLD_KEYPAD is NEWPANEL but not ULTIPANEL 2017-05-31 23:48:03 -05:00
Scott Lahteine
4296a8b74e For status scrolling, pad a short message 2017-05-31 23:48:03 -05:00
Scott Lahteine
4a96433b7e Simplify counting of printable characters 2017-05-31 23:45:41 -05:00
Scott Lahteine
8d69394ae1 Fix LCD printing of progmem strings 2017-05-31 23:36:57 -05:00
Scott Lahteine
c74d4dede6 Prevent illegal leveling combinations 
Addressing issue #6901
 2017-05-31 23:36:57 -05:00
Scott Lahteine
155aa62fb0 Merge pull request #6912 from thinkyhead/bf_better_pulse_delay 
Account for dual XYZ in pulse delay cycles estimate
 2017-05-31 22:21:47 -05:00
Scott Lahteine
a5fa586642 Preferred patch to gcode.h 2017-05-31 21:18:16 -05:00
Bob-the-Kuhn
1b41e1f645 another compile error 
only seen if

#if ENABLED(TEMPERATURE_UNITS_SUPPORT)
      ...
    #if
ENABLED(ULTIPANEL) && DISABLED(DISABLE_M503)
 2017-05-31 13:59:49 -05:00
Bob-the-Kuhn
65bd4c8c94 Merge pull request #6797 from Bob-the-Kuhn/M355-case-lightimprovements-(1.1.x) 
M355 case light improvements (replaces PR #5685)
 2017-05-31 13:33:59 -05:00
Bob-the-Kuhn
9657e7d3ee copied file changes from PR #5685 
==============================

Configuration_adv.h changes

==============================

add "live" LCD update

==============================

P & S version

==============================

final (hopefully) tested version

==============================

update M115 capabilities print

==============================

Menu changes portion of the requested changes

==============================

changed USEABLE_HARDWARE_PWM from a function to a series of macros

==============================

changes per review
 2017-05-31 13:22:38 -05:00
Bob-the-Kuhn
8206bb9bb9 fix compile error 
invalid conversion from 'const char*' to 'char*' [-fpermissive]
 2017-05-31 13:17:01 -05:00
Scott Lahteine
df91346188 Account for dual XYZ in pulse delay cycles estimate 2017-05-31 12:23:28 -05:00
Scott Lahteine
7236109f2a Patch M24 / M125 for delta 2017-05-30 23:07:29 -05:00
Scott Lahteine
be17033762 Fix case light menu toggle 2017-05-30 14:03:45 -05:00
Scott Lahteine
89b93058e3 Merge pull request #6887 from christianh17/PR-sanitycheck 
enable DEACTIVATE_SERVOS_AFTER_MOVE with switching nozzle
 2017-05-30 13:43:39 -05:00
Scott Lahteine
05b66234ae Merge pull request #6895 from thinkyhead/bf_user_commands 
Custom user commands menu
 2017-05-30 13:40:50 -05:00
Scott Lahteine
84a0a77c59 Merge pull request #6852 from tcm0116/mixing_extruder_lin_advance 
Generate error if MIXING_EXTRUDER and LIN_ADVANCE are both enabled
 2017-05-30 13:37:51 -05:00
Scott Lahteine
266ae8912a Formatting in _draw_heater_status 2017-05-30 03:32:16 -05:00
Scott Lahteine
6b9ca16f36 Patch lcd_print edge limit code 2017-05-30 03:32:15 -05:00
Tannoo
74d6dee920 User Command (Script) Menu 
The menu (commands / scripts) is configurable in `Configuration_adv.h`.

- Added conditionals.
- Changed script handling.
- Slimmed and working!
- Added Status message.
- Returning to lcd status screen now!
- Example Configs Updated.
- Cleanups by @thinkyhead
 2017-05-30 02:33:57 -05:00
Scott Lahteine
d9c8072037 Edit PROPORTIONAL_FONT_RATIO comment 2017-05-30 01:29:39 -05:00
Scott Lahteine
46b32e4548 Cleanup LCD interface, add lcd_reset_status 2017-05-29 22:16:13 -05:00
Scott Lahteine
ca99d67ede Fix UBL "Info screen" menu items 2017-05-29 19:55:26 -05:00
Scott Lahteine
2c7a39bc0e Fix LCD print aborted message 2017-05-29 19:52:01 -05:00
Scott Lahteine
0f1e8c195d Draw on LCD after value has changed 2017-05-29 19:42:30 -05:00
Scott Lahteine
51587c4b43 Rename Feedrate to Velocity to match prior naming 2017-05-29 17:54:15 -05:00
Scott Lahteine
9677f3f2f5 Patch up LCD Bed Leveling menu 2017-05-29 17:51:11 -05:00
Scott Lahteine
fc2eaab7f3 Show home option in level bed menu 2017-05-29 17:51:10 -05:00
Scott Lahteine
c6a7adc293 Patch G29 A and Q arguments to bypass setup 2017-05-29 17:51:10 -05:00
Scott Lahteine
4cece2d72e Use NAN for G29 W omitted parameters 2017-05-29 17:51:10 -05:00
Scott Lahteine
2d71569138 Fix spacing in JSON output 2017-05-29 17:51:10 -05:00
Scott Lahteine
b2d3c8aedd Have G28 do a refresh of the display 2017-05-29 17:51:10 -05:00
Scott Lahteine
50ab9c2e04 General cleanup of spacing, comments 2017-05-29 15:34:14 -05:00
Scott Lahteine
f1e33afda4 Return to Bed Leveling menu when done 2017-05-29 15:31:02 -05:00
Scott Lahteine
78d8c598e1 Fix lcd_synchronize with message 2017-05-29 15:31:02 -05:00
Scott Lahteine
eb39d6e3e2 Don't draw progress bar until it has 1% 2017-05-29 15:31:01 -05:00
Scott Lahteine
194f8b2f55 Start at Z=0 in manual probing 2017-05-29 15:31:01 -05:00
Scott Lahteine
6f89db11f0 Allow lcd_setstatusPGM to reset the alert level 2017-05-29 15:31:00 -05:00
Scott Lahteine
3fe333143c Case light as a toggle menu item 2017-05-28 14:32:07 -05:00
Scott Lahteine
d013bddfa8 Merge pull request #6876 from thinkyhead/bf_extend_leveling_menu 
Extend the ABL/MBL Bed Leveling menu
 2017-05-28 14:19:02 -05:00
Scott Lahteine
01e7e234c6 Add more options to the Bed Leveling menu 2017-05-28 14:04:28 -05:00
Scott Lahteine
0cbe448edf Split up Control > Motion submenu 2017-05-28 12:52:24 -05:00
Scott Lahteine
a3645ec921 Reference op with variable name 2017-05-28 11:33:22 -05:00
Scott Lahteine
71367fd518 Scrolling status message option 2017-05-28 11:26:28 -05:00
Scott Lahteine
b0eae68f57 Prevent bed temperature being set too high 2017-05-28 11:11:17 -05:00
Scott Lahteine
493f0b0c62 Fix some compiler warnings 2017-05-28 11:06:33 -05:00
christianh17
f379a326cc enable DEACTIVATE_SERVOS_AFTER_MOVE with switching nozzle 
When using switching nozzle it should be possible to disable the servo after move. Do it only if you do not need the servo power to keep the position.
 2017-05-28 15:33:28 +02:00
Scott Lahteine
33279a1e02 Code style tweak to gcode.h 2017-05-27 19:47:26 -05:00
Ernesto Martinez
ac959b12ee Updates to language_es.h based on latest updates. (#6871) 
Spanish language updates
 2017-05-27 19:08:39 -05:00
Scott Lahteine
55c700d537 Tweak to gcode.h 2017-05-26 22:11:31 -05:00
Bob-the-Kuhn
868e7db4ae value check was looking at the code 2017-05-26 14:49:42 -05:00
Thomas Moore
fb5e0ffe16 Unify M600 and M125 pause features (#6407) 
* Unify M600 and M125 pause features
* Cleanup per thinkyhead's comments
* Rename filament_change_menu_response to advanced_pause_menu_response
* Include HAS_BED_PROBE in QUIET_PROBING
* Update gMax example file
* is_idle() is out of scope without the braces
* Convert FT-i3-2020 to Advance Pause names...
* Allow pause even if not printing
 2017-05-26 13:01:02 -05:00
Scott Lahteine
b3a97b5013 Patch up LCD level bed menus 2017-05-25 23:53:31 -05:00
Scott Lahteine
78af2b1444 Fix PROBE_MANUALLY via G-code 2017-05-25 23:53:31 -05:00
Scott Lahteine
082da23391 One fewer EOL in M503 output 2017-05-25 23:53:31 -05:00
Scott Lahteine
b15e531464 Fix screen change on character display 2017-05-25 15:29:14 -05:00
Thomas Moore
44e657766e Add incompatibility error to Sanity Check for MIXING_EXTRUDER and LIN_ADVANCE 2017-05-25 08:06:27 -05:00
Scott Lahteine
735405b2a4 Merge pull request #6848 from thinkyhead/bf_scara_M665 
Add M665 for SCARA
 2017-05-24 20:51:51 -05:00
Scott Lahteine
ffa901f373 Merge pull request #6839 from thinkyhead/bf_day_ending_in_y 
UBL ultralcd.cpp patches
 2017-05-24 17:55:44 -05:00
Scott Lahteine
361cbba113 Use M665 to set SCARA angle offsets 2017-05-24 17:49:24 -05:00
Scott Lahteine
5ed63a5724 Apply const in prepare_kinematic_move_to 2017-05-24 17:49:24 -05:00
Scott Lahteine
5cbe0244c5 Fixes for spindle/laser and SCARA probe bounds 2017-05-24 17:49:23 -05:00
Scott Lahteine
1f52c9f5df Neater Megatronics 3 pins 2017-05-24 17:49:23 -05:00
Scott Lahteine
af81cb4cbb Patch for M503 output 2017-05-24 17:49:09 -05:00
Scott Lahteine
1d167a6874 Some cleanup, fixes for ultralcd.cpp UBL code 
- Free up 30 bytes of SRAM in UBL LCD code
- Fix BUILD_ABS_MESH temperature
- Fix UBL indentation in ultralcd.cpp
- UBL vars lowercase, "convert to positive" sensibly
 2017-05-24 01:10:42 -05:00
Scott Lahteine
f4028fe088 New GCode Parser - Implementation 2017-05-23 14:15:10 -05:00
Scott Lahteine
002a06c507 New GCode Parser - Configuration 2017-05-23 14:15:07 -05:00
Scott Lahteine
ad915b667e One more mesh_index_to_npos update 
Followup to #6827
 2017-05-23 13:02:50 -05:00
Scott Lahteine
2881f0a48d Fix, extend G42 with P (probe) parameter 
- Also fix handling of SCARA and misuse of `codenum`.
 2017-05-23 04:55:42 -05:00
Scott Lahteine
d252d1b6a2 Merge pull request #6831 from thinkyhead/bf_move_g7 
Move G7 to G42
 2017-05-23 03:02:57 -05:00
Brian
82ca6248e2 Move G7 to G42 
See: #6777
 2017-05-22 23:21:35 -05:00
Scott Lahteine
26ffa558a3 Use redraw flag for both types of LCD 2017-05-22 18:34:54 -05:00
Scott Lahteine
3ff7515527 Merge pull request #6817 from cbusillo/patch-1 
missing enable for M605 for duplication mode
 2017-05-22 18:07:11 -05:00
Scott Lahteine
34cfbc90cd Use new attribute macros in more places 2017-05-22 17:38:58 -05:00
Scott Lahteine
85b967657e Embed G26/G29 in ubl class, with enhancements 2017-05-22 17:38:58 -05:00
Scott Lahteine
c99bd69889 Apply const float & more 2017-05-22 17:38:36 -05:00
Scott Lahteine
ad5638f78c Cleanup some fastio code 2017-05-22 17:38:36 -05:00
Scott Lahteine
e271521c39 Single user_canceled function in G26 2017-05-22 17:38:36 -05:00
Scott Lahteine
c2ea22da49 Clean up whitespace 2017-05-22 17:38:36 -05:00
Scott Lahteine
ceb62fc7e1 Fixes #6828: M428 bug 2017-05-22 17:34:03 -05:00
oldmcg
48f7652143 UBL G29 -P3.1 smart fill (#6823) 
* UBL G29 -P3.1 mesh fill with distance-weighted least squares fit.

* Back to original -O0 on G29 for now.
 2017-05-22 12:33:50 -05:00
Scott Lahteine
850203fb3a Merge pull request #6816 from thinkyhead/bf_lcd_live_editing 
Constrain LCD status message rendering
 2017-05-22 11:15:35 -05:00
Roxy-3D
3129260c44 Misc. Clean Up (#6822) 
* Misc. Clean Up

Mostly UBL related clean up.
- But fixed a bug in the thermistortables.
- Made G26 more responsive to user aborts.
- Added sanity checks for older name for UBL_MESH_VALIDATION.
- Made G29 P4 able to edit invalidated mesh points
- Restore a reasonable Fade Height for UBL when creating new state information
- Get UBL's Topology Map to look a little bit better
- Make sure the user doesn't see a blank screen when doing Mesh Editing.

* Huh???   GitHub Desktop screwed up!

* get the planner object in scope

* Fix out of scope z_fade_height

* Travis timed out...

I need a change so I can force a new commit and sync.
 2017-05-21 22:09:51 -05:00
cbusillo
3b4116e73b missing enable for M605 for duplication mode 
I believe gcode_M605 will not be called when using DUAL_NOZZLE_DUPLICATION_MODE without this change.
 2017-05-21 13:54:20 -04:00
Scott Lahteine
5e8892d6b5 Show Restore Failsafe item with EEPROM off 2017-05-21 12:52:44 -05:00
Scott Lahteine
76af9ac7c5 tweaks 2017-05-21 12:51:58 -05:00
Scott Lahteine
ba5910ab6c Constrain LCD status message rendering 2017-05-21 12:35:16 -05:00
MagoKimbra
2c309a8f7c Fix set_lcd_contrast 2017-05-21 19:01:44 +02:00
Scott Lahteine
22dbb2117c Merge pull request #6812 from thinkyhead/bf_day_ending_in_y 
Cleanup code, organize & document fastio pin mappings
 2017-05-21 11:39:04 -05:00
Roxy-3D
364f8fb613 Update Configuration.h files to better names (#6814) 
Changed UBL_G26_MESH_EDITING to UBL_G26_MESH_VALIDATION
Added UBL_MESH_EDIT_MOVES_Z to prepare for that change (coming next)
 2017-05-21 11:10:22 -05:00
Scott Lahteine
d7fda2fe49 Formatting, const in G33 2017-05-21 10:40:05 -05:00
Scott Lahteine
1519b0e7c1 Split up fastio.h, document pin mappings 2017-05-21 10:33:27 -05:00
Scott Lahteine
49599caade General cleanup to utf_mapper.h 2017-05-21 10:33:27 -05:00
Scott Lahteine
02f15f6775 UBL-related cleanup, spacing, standards 
Reference: #6804
 2017-05-21 10:33:26 -05:00
Scott Lahteine
52e20aeab3 Pins-related cleanup, formatting 2017-05-21 07:18:03 -05:00
Scott Lahteine
ea906e4da7 Merge pull request #6810 from thinkyhead/bf_lcd_live_editing 
Add "live editing" option to LCD menus
 2017-05-21 06:11:52 -05:00
Scott Lahteine
11fc9564c9 Add live editing option to LCD menu 2017-05-21 05:29:46 -05:00
Scott Lahteine
8a0a5cfccc Temp-related cosmetic changes 2017-05-21 04:49:25 -05:00
Scott Lahteine
b29dbbd5e4 Use uint16_t for temps 2017-05-21 04:48:53 -05:00
Scott Lahteine
ebcd1aaf88 Access hotend/bed temperatures as float 2017-05-21 04:46:31 -05:00
Scott Lahteine
6ce2b1ff4a G33 evolutionary changes 2017-05-20 19:23:39 -05:00
Scott Lahteine
3c061a9f9a UBL tabs, whitespace, spelling, etc. 2017-05-19 14:16:50 -05:00
Scott Lahteine
75badae2f8 Disable PROBE_MANUALLY for UBL 
Plus some other UBL tweaks.
 2017-05-19 07:13:18 -05:00
Scott Lahteine
94a4af1d7f Merge pull request #6773 from thinkyhead/bf_lcd_patch_e5 
Patch LCD code for 5th extruder
 2017-05-18 15:26:55 -05:00
Brian
01f452c37c Tweak Azteeg X3 PRO _pins.h so Viki2 will work for those without a case light. 
- add comment explaining that the Panucatt Viki2 wiring diagram uses pin 44
 2017-05-18 13:00:13 -04:00
Brian
e09b4ce4a5 Add checking 2017-05-17 19:46:16 -04:00
Brian
13599a73c7 Add G7 gcode command to move between UBL mesh points 
- can be augmented in the future to enable for other leveling systems

Quite simple, but did not want to modify `G1` as the additional checking would slow it down.

Tested & working.
 2017-05-17 19:05:36 -04:00
Brian
43c24f0027 Fix recent regressions, &c. 
- fix broken `M421` due to less-than-careful optimization
- add HOME_AFTER_DEACTIVATE define to advanced config so not everyone has to rehome after steppers are deactivated
- misc. cleanups (remove unused label, unused variables)
 2017-05-17 17:21:46 -04:00
Scott Lahteine
3843a5151a Patch LCD code for 5th extruder, EEPROM reset 2017-05-17 15:33:51 -05:00
Scott Lahteine
6c064bb7d6 Some probe_pt error-handling 2017-05-17 15:33:51 -05:00
Brian
3370329751 Fix broken EEPROM save/load 2017-05-17 12:41:27 -04:00
Scott Lahteine
f0fe26c411 Ensure Arduino.h and configs are included for serial.cpp 2017-05-17 05:07:35 -05:00
Scott Lahteine
ffb5353294 Merge pull request #6738 from thinkyhead/bf_config_crc_rebase 
Implement CRC16, develop mesh allocation table
 2017-05-17 04:44:00 -05:00
Scott Lahteine
e806e6419a Merge pull request #6768 from thinkyhead/rc_spindle_m3_m5 
Spindle / Laser support
 2017-05-17 04:39:32 -05:00
Scott Lahteine
d6f49c6626 Merge pull request #6752 from jdelahayes/bugfix-1.1.x 
Update french language
 2017-05-17 04:32:28 -05:00
Scott Lahteine
55a87da036 SPINDLE/LASER implementation 2017-05-17 04:26:15 -05:00