SunRed/Marlin-Artillery-M600
Archived
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
3552 commits 1 branch 0 tags 119 MiB
Commit graph

2816 commits

Author SHA1 Message Date
Edward Patel
5360158545 Merge branch 'Development-Marlin' into Development 2015-04-05 20:28:44 +02:00
AnHardt
bf04a92cc0 Draw content in display loop only when needed 
Example for splash screen.
 2015-04-05 12:53:20 +02:00
AnHardt
9865318f1c Disable splash-screen when done once 
Splash screen was shown with every display init.
That means every time the menus where entered.

Note the 2 in the initialisation.
The buffer is already written in two steps a 512 byte.
Without the 2 only the upper half is shown.
 2015-04-05 12:24:01 +02:00
Scott Lahteine
53eb662908 Have the configurator read from MarlinFirmware repo 2015-04-04 20:19:17 -07:00
Edward Patel
d24ea7c03f Added Comment in hope of github seeing these updates 2015-04-05 05:14:06 +02:00
Edward Patel
61de6ecd54 Added change to example Configuration.h's 2015-04-05 04:26:35 +02:00
Edward Patel
2f0081bbb5 Compile error fix! Fix for merge artifacts. 2015-04-05 04:16:16 +02:00
Edward Patel
0e6514e7bd Bug fix! Missed putting z value back in right slot after zigzag mod. 2015-04-05 04:13:34 +02:00
Edward Patel
ea10601406 Merge branch 'Development-Marlin' into Development 
Conflicts:
	Marlin/Configuration.h
	Marlin/Marlin_main.cpp
 2015-04-05 04:06:02 +02:00
Scott Lahteine
cb02bc6db4 Merge pull request #1817 from AnHardt/dogm_looptest 
Execute DOGM display-loop less often
 2015-04-04 17:29:56 -07:00
quillford
b02a55e60f Fixed scara directions 
Config said for a delta instead of for a scara
 2015-04-04 15:26:35 -07:00
Scott Lahteine
6c5f07c5cb Merge pull request #1813 from thinkyhead/fixup_probing 
Fix bad thermal runaway trigger
 2015-04-04 14:41:43 -07:00
AnHardt
340d165a9c Reduce display updates for dogm displays 
In 'if (encoderPastThreshold || LCD_CLICKED)' lcdDrawUpdate was not set.

'lcd_status_update_delay'-loop was not effective in  function
lcd_status_screen().
The loop prevented the update of the status screen but not the displays
update.
Shifted the loop into lcd_update().
 2015-04-04 22:02:24 +02:00
AnHardt
418d22d7b3 Revert "Testloop cleanup" 
This reverts commit 6361404b91.
 2015-04-04 18:33:36 +02:00
AnHardt
6361404b91 Testloop cleanup 
Shifted condition should still be in.
 2015-04-04 17:56:13 +02:00
AnHardt
6d4b3f0d6a Move the condition before the loop 
Result see: https://youtu.be/AEnBzdu9_tk
Dot is moving not so fast -> less executed loops.
 2015-04-04 17:49:39 +02:00
AnHardt
4cb7dfc546 Move the 'alive dot' in every displayloop 
Result see: https://www.youtube.com/watch?v=tdu7J0i-c4g
Loop is executed several times per display update.
 2015-04-04 17:34:28 +02:00
Scott Lahteine
b0f198c153 heater_index above its use 2015-04-04 06:18:08 -07:00
Scott Lahteine
60f8e0386f More thermal runaway states 2015-04-04 05:45:36 -07:00
Scott Lahteine
f9dbd73652 Fix tr_target_temperature type - float! 2015-04-04 05:25:53 -07:00
Scott Lahteine
c83faa9c5e Merge pull request #1811 from thinkyhead/fixup_probing 
Compare indices instead of floats for probe actions
 2015-04-04 05:14:59 -07:00
Scott Lahteine
61f8394361 Compare indices instead of floats for probe actions 2015-04-04 05:01:16 -07:00
Scott Lahteine
a98183b463 Merge pull request #1809 from Wackerbarth/LanguageCleanup 
Deferring default definition made #undef unnecessary
 2015-04-04 04:37:20 -07:00
Scott Lahteine
41ded7e996 Merge pull request #1805 from thinkyhead/fixup_probing 
Optimize coordinate copying, fix EXTRUDER_RUNOUT_PREVENT
 2015-04-04 03:49:54 -07:00
Richard Wackerbarth
4119738e69 Deferring default definition made #undef unnecessary 2015-04-04 05:48:07 -05:00
Scott Lahteine
6f06d33be5 Fix missing refresh_cmd_timeout function 2015-04-04 03:47:25 -07:00
Scott Lahteine
2d099a2c70 Fix missing backslash in macro 2015-04-04 03:35:16 -07:00
Scott Lahteine
0f9b29e6c5 Merge pull request #1803 from Natealus/Development 
Z_PROBE_ENDSTOP Pin for Azteeg X3 Pro
 2015-04-03 23:45:05 -07:00
Scott Lahteine
0935084141 Fix manage_inactivity 
- Document `manage_inactivity` function
- Allow `EXTRUDER_RUNOUT_PREVENT` to work with all extruders
- Use faster `memcpy` for copying coordinates
 2015-04-03 23:42:50 -07:00
Scott Lahteine
c065da52ec Spacing and spelling 2015-04-03 22:54:48 -07:00
Scott Lahteine
a3e129e091 Merge pull request #1801 from thinkyhead/fixup_probing 
Minor optimizations
 2015-04-03 22:30:01 -07:00
Natealus
ab11f90da0 Z_PROBE_ENDSTOP Pin for Azteeg X3 Pro 
Just a simple #ifdef Z_PROBE_ENDSTOP to define the pin for it. Also has
a couple commented lines for switching Z_MIN_PIN if needed.
 2015-04-03 23:14:03 -06:00
Scott Lahteine
8680b515b0 Fix missing tmp_extruder -> target_extruder 2015-04-03 22:12:49 -07:00
Natealus
a6ba40ae48 Compiling error temperature.cpp with multiple extruders defined 
It wouldn't compile because of this line in temperature.cpp it turns out
it was just a stray ( that didn't line up with the previous lines so I
just made it in line with the rest and it compiled fine.
 2015-04-03 23:09:31 -06:00
Scott Lahteine
fc3c76fc16 Fix #1800 2015-04-03 22:04:42 -07:00
Scott Lahteine
c185912c19 Latest upstream commits, mostly 2015-04-03 21:58:48 -07:00
Scott Lahteine
1e5c18bb14 Add code_value_short and SERIAL_CHAR 2015-04-03 21:43:30 -07:00
Scott Lahteine
e0d4368cb5 Minor code cleanup, move NUM_AXIS out of config 2015-04-03 20:45:24 -07:00
Scott Lahteine
4c7af484f8 Merge pull request #1787 from thinkyhead/fixup_tr 
Fix: thermal_runaway_protection triggered by target temperature increase
 2015-04-03 20:06:56 -07:00
Scott Lahteine
c747becec1 Merge pull request #1796 from thinkyhead/pidbed_temp_eeprom 
Add PIDTEMPBED to EEPROM
 2015-04-03 20:03:38 -07:00
Scott Lahteine
84e4edaea7 Add M48 comment for #1794 2015-04-03 19:52:00 -07:00
Scott Lahteine
9ba55baa5b Track target temperature separately for each heater 2015-04-03 19:42:40 -07:00
Scott Lahteine
528e32a1d4 Fix timeout in thermal_runaway when temperature is set higher 2015-04-03 19:34:55 -07:00
Scott Lahteine
b98ebd517e disable / enable_all_steppers functions 2015-04-03 19:25:22 -07:00
Scott Lahteine
713953d8c1 Upstream commits, allow no extruder in M105 2015-04-03 19:16:38 -07:00
Scott Lahteine
8f893eb8df Merge pull request #1798 from thinkyhead/fixup_probing 
Fix probe height at G28 start
 2015-04-03 19:03:00 -07:00
Scott Lahteine
dde7e11f8e Merge branch 'Development' into fixup_tr 
Latest upstream commits
 2015-04-03 18:56:52 -07:00
Scott Lahteine
abd7fc36b6 Fix probe height at G28 start 2015-04-03 18:54:55 -07:00
Scott Lahteine
610c8c5471 Merge pull request #1795 from thinkyhead/fixup_probing 
Finish pin tests
 2015-04-03 18:44:44 -07:00
Scott Lahteine
e4934164e4 Merge pull request #1790 from Wurstnase/fix_home_z 
fix feedrate for homing z
 2015-04-03 18:35:09 -07:00
Scott Lahteine
a469d796e1 Add cleanups needed for #1772 2015-04-03 18:14:57 -07:00
Scott Lahteine
c0ca26cd50 Merge branch 'Development' into fixup_probing 
Latest upstream commits
 2015-04-03 18:05:17 -07:00
Scott Lahteine
5c1f08a35f Merge pull request #1772 from croadfeldt/Merge_cleanup 
Z_PROBE_ENDSTOP
 2015-04-03 18:04:31 -07:00
Scott Lahteine
db7b0ea0cf Merge pull request #1569 from Wackerbarth/Development 
Incorporating Build Numbers
 2015-04-03 16:56:31 -07:00
Scott Lahteine
92119d0f7d Static delta[] for SCARA 2015-04-03 16:46:56 -07:00
Scott Lahteine
007a4bd421 Adjust spacing in view function 2015-04-03 16:41:58 -07:00
Scott Lahteine
424d5495e4 Add PIDTEMPBED to EEPROM 2015-04-03 16:38:05 -07:00
Scott Lahteine
6b919e14c1 Group all universal variables 2015-04-03 15:45:41 -07:00
Scott Lahteine
21cd2e4fae Merge branch 'Development' into fixup_probing 
Latest upstream commits
 2015-04-03 15:32:15 -07:00
Scott Lahteine
0e8182bbf2 Additional pin tests, cleanup 2015-04-03 15:31:35 -07:00
Wurstnase
45565b680d second wrong feedrate 2015-04-03 18:01:28 +02:00
Wurstnase
581b2aae04 fix feedrate for homing z 
max_feedrate is in mm/s. line_to_destination needs a feedrate in mm/min because there is feedrate/60.
 2015-04-03 16:11:32 +02:00
Edward Patel
48b1c3822f Merge branch 'Development-Marlin' into Development 2015-04-03 00:46:30 +02:00
Richard Wackerbarth
ccdaea51ba Add KosselPro 2015-04-02 09:20:24 -05:00
Richard Wackerbarth
f4599143eb Allow M115 to better reflect the build 2015-04-02 09:20:24 -05:00
Richard Wackerbarth
34c7d45879 Hook for Auto-generated Build Version 
The automatic versioning system extracts a
build version number from the SCM system

That versioning information is written to the file
_Version.h, a file that is NOT preserved in the SCM.

If such a file will be present,
we include it here to utilize the parameters
that are defined therein.
 2015-04-02 09:20:24 -05:00
Scott Lahteine
c756b4cf07 Comment tweak 2015-04-02 06:11:03 -07:00
AnHardt
23cd54755f Fix typo in Marlin_main.cpp 
related to current_position[Z_AXIS] and retract_zlift.

'+ =' -> '+='

Fix for #1786
 2015-04-02 14:50:31 +02:00
Scott Lahteine
e96df67630 Clarify thermal_runaway_protection 
- Add comments documenting `thermal_runaway_protection`
- Add an enum for the thermal runaway states
- Add macros for temperature helper functions
- Fix a glitch with the z probe sled in homeaxis
 2015-04-02 05:10:14 -07:00
Chris Roadfeldt
0afe6696f0 Merge remote-tracking branch 'MarlinFirmware/Development' into Merge_cleanup 2015-04-01 19:31:20 -05:00
Chris Roadfeldt
59994bd519 Not doing network admin work, pin not ping... :) 2015-04-01 19:24:42 -05:00
Chris Roadfeldt
916f59e35f Spaces not tabs in language.h. 
Catch unlikely but possible error and head crash when using
Z_PROBE_REPEATABILITY_TEST
 2015-04-01 19:22:05 -05:00
Scott Lahteine
66b3b53e76 Merge pull request #1762 from AnHardt/MiMa 
Fix MIN&MAX temperatures again
 2015-04-01 16:52:07 -07:00
Edward Patel
6b91b7b411 Mesh bed leveling: Added G29 S3 + finer steps in manual probing. 
* Use "G29 S3 Xn Yn Zn.nn" to modify bad probed point manually
* Changed manual Z steps from 0.05 to 0.025 and made brought it to Configuration.h
 2015-04-01 21:18:51 +02:00
Chris Roadfeldt
26dc80bf2d Typo fixed... 2015-04-01 13:47:17 -05:00
Chris Roadfeldt
2966ae2022 Fix Z_PROBE_PING not declared, allows code to compile if Z_PROBE_ENDSTOP 
is not used.
 2015-04-01 13:32:25 -05:00
Wurstnase
67d5e7973e old bump_divisor for cartesian/corexy-printer 
some people are starting to ask why homing is so slow. this is the old standard hard-coded value.
 2015-04-01 20:17:49 +02:00
Chris Roadfeldt
bb41edc2ef Fixed extra #endif 2015-04-01 12:13:25 -05:00
Chris Roadfeldt
a57862e29f Cleaning up code in prep for merge with upstream. 2015-04-01 11:40:24 -05:00
Chris Roadfeldt
745d9fe1a4 Merge remote-tracking branch 'MarlinFirmware/Development' into Merge_cleanup 
Conflicts:
	Marlin/Marlin_main.cpp
 2015-04-01 10:31:02 -05:00
AnHardt
488666832b Remove the previously introduced () 2015-04-01 13:40:05 +02:00
Scott Lahteine
443468df8d Merge pull request #1771 from AnHardt/iss1770 
Added new - changed entries from Fix up LCD_PROGRESS_BAR
 2015-04-01 02:13:30 -07:00
Scott Lahteine
9593f09b99 Merge pull request #1764 from thinkyhead/probe_leveling 
Fix homing and leveling
 2015-04-01 02:00:39 -07:00
Scott Lahteine
72c7de3570 Cleanup M48 2015-04-01 01:48:45 -07:00
Scott Lahteine
97a258b0b0 Clean up, document home_axis 2015-04-01 01:44:13 -07:00
AnHardt
831016b09f Added new - changed entries from Fix up LCD_PROGRESS_BAR 
for when no LCD is defined.
Fix for #1770.
 2015-04-01 10:17:17 +02:00
Chris Roadfeldt
a508d835db Changed Z_PROBE_AND_ENDSTOP to Z_PROBE_ENDSTOP. 
Updated documentation in Configuration.h.
Cleaned up and commented some code relating to Z_PROBE_ENDSTOP.
Separated Z_MIN_ENDSTOP and Z_PROBE_ENDSTOP completely.
 2015-04-01 02:14:55 -05:00
Chris Roadfeldt
fdb4ddbdea Merge remote-tracking branch 'MarlinFirmware/Development' into Development 2015-04-01 00:52:08 -05:00
atfield90
d273c90d53 Added support for Atmega 1281 chip 2015-04-01 05:15:27 +02:00
Scott Lahteine
1c7391717e Include sync_plan_position_delta for SCARA also 2015-03-31 19:58:03 -07:00
Scott Lahteine
8231fb166d Merge pull request #1758 from AnHardt/MENU_MULTIPLIER_ITEM 
Fix: Audio feedback for MENU_MILTIPLIER_ITEM click
 2015-03-31 19:29:48 -07:00
Scott Lahteine
0b57a2ab8b Merge pull request #1757 from bq/Translation-strings 
Added new trasnslatable labels.
 2015-03-31 18:56:25 -07:00
Scott Lahteine
18bb6be80e Fix homing and leveling 
- Include the current Z when raising the axis after and between probing
- Add `sync_plan_position_delta` for parity with `sync_plan_position`
- Clean up and clarify `M48`, `dock_sled`, and others
 2015-03-31 18:52:19 -07:00
AnHardt
3f2e863206 Improve conditions for HAS_TEMP 
and use them in temperuture.h

Flattened the if structure - the preprocessor is doing the work - not the Arduino. Arduino.
 2015-04-01 02:56:14 +02:00
AnHardt
85f8a26ba4 Fix MIN&MAX temperatures again 
replaced GE0 with th matching GEX in the second row.
added some ()
 2015-04-01 00:48:04 +02:00
AnHardt
19b11dfdd7 Fix can't enter MENU_MULTIPLIER_ITEM 2015-03-31 18:29:16 +02:00
Chris Roadfeldt
c89b8368ee Merge remote-tracking branch 'MarlinFirmware/Development' into Development 
Conflicts:
	Marlin/Marlin_main.cpp
 2015-03-31 11:08:36 -05:00
Ivan Galvez Junquera
d08782386b Added new trasnslatable labels. 
* Added MSG_END_HOUR and MSG_END_MINUTE labels to all language files.
* Available translations:
  EN, FR, DE, ES, IT, PT, PT-BR.
 2015-03-31 16:59:43 +02:00
Scott Lahteine
97a69d9b1c Correct XYZ after obtaining plan_bed_level_matrix 
The current position needs to be updated by using the inverse
`plan_bed_level_matrix` on X, Y, and Z. All moves in the planner are
transformed by the `plan_bed_level_matrix` from this point forward.
 2015-03-31 04:24:13 -07:00
Scott Lahteine
5f6962dd90 Merge pull request #1755 from thinkyhead/fixup_config 
Raise when not retracting
 2015-03-31 03:47:01 -07:00
Scott Lahteine
ae89ccd2c7 Use Z_RAISE_BETWEEN_PROBINGS 2015-03-31 03:45:21 -07:00
Scott Lahteine
9a5a7a3f68 Raise when not retracting 
Code to raise the probe before retraction is good, but the code should
always raise the probe, not just when retracting
 2015-03-31 03:38:03 -07:00
Scott Lahteine
6ff1620fcb Merge pull request #1753 from thinkyhead/fix_extruder_offset 
Fix EXTRUDER_OFFSET compiler error
 2015-03-31 03:21:45 -07:00
Scott Lahteine
cda4bd4ad9 Correct the comment about M206 2015-03-31 03:20:15 -07:00
Scott Lahteine
935592cf6a offsets off by default 2015-03-31 02:50:52 -07:00
Scott Lahteine
2a45922afe Restore extruder_offset, init more simply 2015-03-31 02:49:47 -07:00
Scott Lahteine
28792e5731 Fix typo in assignment 2015-03-31 02:10:49 -07:00
Scott Lahteine
bb6174524f Fix EXTRUDER_OFFSET compiler error 
- Addressing issue #1741
 2015-03-31 02:08:57 -07:00
Scott Lahteine
571652c49b Fix LCD click 
- Make the default LCD click sound more pleasant
- Fix warnings about bed temperature runaway
 2015-03-31 01:41:24 -07:00
Chris Roadfeldt
45ece5afb1 Merge remote-tracking branch 'MarlinFirmware/Development' into Development 2015-03-31 03:07:57 -05:00
Chris Roadfeldt
17707e7479 Fixed Z_PROBE_PIN pullup bug. 
Documented some additional areas that should be addressed if Z_PROBE is
fully separated from Z_MIN or Z_MAX.
Fixed a documentation error in sanity checks. Servos start at 0 not 1.
 2015-03-31 02:56:41 -05:00
Scott Lahteine
21ab44cfa7 Merge pull request #1750 from thinkyhead/fixup_config 
Bring all configs up to date
 2015-03-30 23:49:04 -07:00
Scott Lahteine
50145266cd Merge pull request #1748 from thinkyhead/raise_before_homing 
Apply Z_RAISE_BEFORE_HOMING before homing XY
 2015-03-30 23:37:41 -07:00
Scott Lahteine
a117b6bff6 Merge pull request #1747 from thinkyhead/progress_bar_tweak 
Fix up LCD_PROGRESS_BAR
 2015-03-30 23:37:28 -07:00
Scott Lahteine
3348b3bf0c Allow SD_FINISHED_RELEASECOMMAND to be undefined 2015-03-30 23:31:48 -07:00
Scott Lahteine
82794fa5f7 Add delta generic not renaming 2015-03-30 23:25:04 -07:00
Scott Lahteine
ba2c7cb467 Update configs with all the latest 2015-03-30 23:24:33 -07:00
Chris Roadfeldt
ec1d9c0b8f Use Z_PROBE_ENDSTOP_INVERTING when checking pin status. 2015-03-31 01:06:01 -05:00
Chris Roadfeldt
3175c70c79 Manually synching back up with MarlinFirmware/Development. 2015-03-31 00:11:11 -05:00
Chris Roadfeldt
faac2af4af Merge remote-tracking branch 'origin/Development' into Development 2015-03-31 00:03:07 -05:00
Chris Roadfeldt
3be00cce6f Merge remote-tracking branch 'MarlinFirmware/Development' into Development 
Conflicts:
	Marlin/Configuration.h
 2015-03-30 23:59:01 -05:00
Chris Roadfeldt
e08f8eed05 Revert 06f767d..cba5692 
This rolls back to commit 06f767d608.
 2015-03-30 23:51:36 -05:00
Scott Lahteine
5e82ed4f30 Restore ENDSTOPPULLUPS in Configuration.h 2015-03-30 21:15:16 -07:00
Chris Roadfeldt
992b07ca57 Don't disable Z_RAISE_BEFORE_HOMING when Z_PROBE_AND_ENDSTOP is enabled. 2015-03-30 22:58:10 -05:00
Chris Roadfeldt
cba5692673 Merge remote-tracking branch 'MarlinFirmware/Development' into Development 
Conflicts:
	Marlin/Marlin_main.cpp
	Marlin/stepper.cpp
 2015-03-30 22:33:05 -05:00
Scott Lahteine
8500c80b33 Apply Z_RAISE_BEFORE_HOMING before homing XY 2015-03-30 20:22:21 -07:00
Scott Lahteine
92b54aa27e #define HAS_POWER_SWITCH 2015-03-30 19:44:53 -07:00
Scott Lahteine
5519882eea Fix up LCD_PROGRESS_BAR 
- Some messages should not expire with `PROGRESS_MSG_EXPIRE`.
- Simplify conditional for progress bar with sanity checks.
- Rename `messageTick` to `expireStatusMillis` and make it the expire
time.
 2015-03-30 18:00:54 -07:00
Scott Lahteine
6864280803 Use elif and parentheses in conditionals 2015-03-30 16:52:27 -07:00
Scott Lahteine
8c136a5ab5 Conditionals and comments for PS = 0 2015-03-30 16:50:05 -07:00
Scott Lahteine
2faed961ce Allow POWER_SUPPLY 0 for no power switch 2015-03-30 16:39:47 -07:00
Scott Lahteine
baa6787393 Merge pull request #1740 from thinkyhead/fixup_homing 
Apply leveling for DELTA
 2015-03-30 15:45:33 -07:00
AnHardt
9ac7dc675e Make filament display on dogm_... same as hitachi... 
Thanks @MagoKimbra.
 2015-03-30 16:56:21 +02:00
AnHardt
50a732360a Replace extrudemultiply by extruder_multiply[active_extruder] 
Fix for #1460.

Seems to work with only one extruder. Can't test this myself with more.
 2015-03-30 13:35:03 +02:00
Scott Lahteine
e63076504d Merge pull request #1733 from AnHardt/c20 
Get back folder symbols on Hitachi displays
 2015-03-30 01:57:00 -07:00
Scott Lahteine
41d258697a Pass the z for after probing to retract_z_probe 
A `z_before` value is passed to probe_pt, but the `retract_z_probe`
function assumes that Z is 0, doesn’t add `current_position[Z_AXIS]` as
other cases do. This may be superfluous, so this is a test, and will be
reverted if it has no effect.
 2015-03-30 00:45:02 -07:00
croadfeldt
06f767d608 Merge remote-tracking branch 'upstream/development' into development 2015-03-30 02:10:49 -05:00
Scott Lahteine
b47fa8c064 Merge pull request #1735 from AnHardt/compilerCandy 
Remove some further warnings
 2015-03-29 23:55:19 -07:00
Scott Lahteine
e96db1cd6c Make G29 shared function inline 2015-03-29 23:21:39 -07:00
Scott Lahteine
d73b169de3 Apply leveling for DELTA, 
- Fix `prepare_move` function not calling `adjust_delta`
- Add more shorthand for plan_buffer_line.
- Fix wrong `federate` usage, assuming they are all mm/m
- Minor `stepper.cpp` cleanup
 2015-03-29 23:16:12 -07:00
Scott Lahteine
85b67e5223 Merge pull request #1738 from thinkyhead/fixup_homing 
Fix G29 E and M48 n
 2015-03-29 20:08:19 -07:00
Scott Lahteine
ce44bee28b Small code reduction 2015-03-29 19:45:14 -07:00
Scott Lahteine
0213f7f016 Cleanup case for M666 2015-03-29 19:39:43 -07:00
Scott Lahteine
803425e12c Fix G29 E and M48 n 
- Users prefer `G29 E` to work like `M48 E` so fixed that
- `M48 n` replaced with `M48 P` (or `p`). `n` legacy support
- Shorten some strings to save precious bytes
- Smaller code for 3-point probing
 2015-03-29 18:56:09 -07:00
Scott Lahteine
1e9999711c Merge pull request #1736 from thinkyhead/fixup_homing 
Fix G28 homing Y with X
 2015-03-29 18:27:17 -07:00
Scott Lahteine
d738b7acdd Merge pull request #1724 from Natealus/Development 
Viki 2 Pins from Manual and Azteeg X3 Pro Endstop Reswap
 2015-03-29 18:26:32 -07:00
Scott Lahteine
e8ae51bfe3 Fix G28 homing Y with X 
- Fixed a typo causing G28 to home incorrectly
- Added documentation to G28
- Added homeXYZ bools to neaten the code
- Added a note about home_offsets being questionable
 2015-03-29 18:06:59 -07:00
AnHardt
7b2550a604 Times can't be negative. 
cardreader.cpp needs temperature.h for autotempShutdown() when
AUTOTEMP is defined but warns about unused variables.
Unpublished variables by putting them in to temperature.cpp.
 2015-03-30 01:58:46 +02:00
AnHardt
507efa771b Remove unused variable fan_rot 
and satisfy the compiler about the implicit compare.
 2015-03-30 01:46:38 +02:00
AnHardt
2b959a7752 Some additional {} to make the compiler happy. 2015-03-30 01:42:35 +02:00
AnHardt
0f1bd6e4a7 In ST7920_SWSPI_SND_8BIT(uint8_t val) parameter is unsigned 
therefor in macro ST7920_WRITE_BYTE(a) cast a to uint8_t
to make the compiler happy.
 2015-03-30 01:40:58 +02:00
AnHardt
81bab8739d Get back folder symbols on Hitachi displays 
and make use of column 20.
 2015-03-29 17:29:48 +02:00
Chris Roadfeldt
a9802c95b3 Ensure Z_PROBE_PIN is defined if Z_PROBE_AND_ENDSTOP is. 2015-03-29 04:18:37 -05:00
Chris Roadfeldt
62834a1c43 Don't deploy probe on Z Axis homing if Z_PROBE_AND_ENDSTOP is enabled, 
unless Z_SAFE_HOMING is.
 2015-03-29 03:55:41 -05:00
Chris Roadfeldt
666fad3494 Typo fixed in sanity check. 2015-03-29 03:25:03 -05:00
Chris Roadfeldt
08a7aa16c5 Don't deploy Z Probe on Z homing if Z_PROBE_AND_ENDSTOP is defined. 2015-03-29 03:21:48 -05:00
Chris Roadfeldt
80285251cc More config cleanup work for Z_PROBE_AND_ENDSTOP. 2015-03-29 03:06:20 -05:00
Chris Roadfeldt
fe4549cd83 Config file Z_PROBE_AND_ENDSTOP description clean up. 2015-03-29 03:04:59 -05:00
Chris Roadfeldt
82d2f11129 More additional sanity checks for Z_PROBE_AND_ENDSTOP 2015-03-29 02:53:55 -05:00
Chris Roadfeldt
05134f0807 Additional Sanity Checks for Z_PROBE_AND_ENDSTOP 2015-03-29 02:51:51 -05:00
Chris Roadfeldt
c75a5e8c55 Fixed typo for Z_PROBE_AND_ENDSTOP support in pins_RAMPS.h. 
Confirmed Sanity checks are working.....
 2015-03-29 02:38:08 -05:00
Chris Roadfeldt
a98ac4033b Added Z_PROBE_PIN to #define for Z_PROBE_AND_ENDSTOP support. 2015-03-29 02:36:26 -05:00
Chris Roadfeldt
6125124d6c Config file cleanup for Z_PROBE_AND_ENDSTOP support. 2015-03-29 02:29:16 -05:00
Chris Roadfeldt
324c14943b Bug fixes for Z_PROBE_AND_ENDSTOP. 
Code cleanup for Z_PROBE_AND_ENDSTOP.
Added Z_PROBE_PIN to pins_RAMPS_13.h
 2015-03-29 02:16:09 -05:00
Natealus
ca5821aa57 Made #ifdef DELTA branch instead 
Another fellow here gave me the idea to do it this way
 2015-03-29 01:08:00 -06:00
Natealus
04fda6b3e9 Undesired behavior with endstops swapped 
Made my swap commented out so its the option not the default.
 2015-03-29 00:55:47 -06:00
Natealus
ca1477d830 Revert "Undesired behavior with endstops swapped" 
This reverts commit 15028e9b08.
 2015-03-29 00:52:53 -06:00
Natealus
15028e9b08 Undesired behavior with endstops swapped 
I made my changes to swap MIN and MAX endstops on the Azteeg X3 Pro the
option rather than the default to fix unexpected reversal.
 2015-03-29 00:42:40 -06:00
Nate Stokes
18245c6cd2 Update pins_RAMBO.h 
Updated for the changes that Thinkyhead made before I submitted mine.
 2015-03-28 22:29:54 -06:00
Natealus
234a9d0b12 Viki 2 Pins from Manual 
I added in the pins into the new board files for the Azteeg X3, X3 Pro,
Printrboard, and Rambo. I'm sure it can be added for others too but
these are the manual specified pins. Just like many things here though,
I can't test for the boards other than the Azteeg X3 Pro. Hopefully it
works smoothly for everyone who happens on this nifty display. :)
 2015-03-28 22:11:12 -06:00
Scott Lahteine
a22efc5f11 Merge pull request #1597 from Wurstnase/g29_auto_script 
G29 auto script
 2015-03-28 20:54:17 -07:00
Scott Lahteine
62a3da9618 Merge pull request #1723 from thinkyhead/tweak_g92 
Tweak G92
 2015-03-28 20:53:37 -07:00
Scott Lahteine
afff968e88 ARRAY_BY_EXTRUDERS, shorthand to sync planner 
- Add some documentation to planner and stepper headers
- Patch up RAMBO pins with undefs
- Add `sync_plan_position` inline to set current XYZE
- Swap indices in `extruder_offset` to fix initialization values
 2015-03-28 20:33:21 -07:00
Scott Lahteine
2b0c25a091 Tweak G92 to call plan_set_position only once, yes? 2015-03-28 19:18:24 -07:00
Natealus
22bea37393 Azteeg X3 Pro Pin Revisions 
I added the fan pins in here and left them at -1 in configuration_adv.h
and it works fine. Pinned for a 4 extruder from 1-4 and HE5 being the
controller fan, HE6 being the Extruder Auto Fan/Water pump in the Kraken
case, and HE7 being for part cooling fan. Added in descriptions for the
MIN MAX pin swap and for servo motor additions.
 2015-03-28 20:14:42 -06:00
Scott Lahteine
93dc0d0518 Merge pull request #1718 from AnHardt/blink 
Move variable blink from ultralcd.h to dogm_lcd_implementation.h
 2015-03-28 16:20:33 -07:00
Scott Lahteine
edb67ea165 Patch generic delta config 
- Addressing issue mentioned at #1699
 2015-03-28 14:13:25 -07:00
AnHardt
c481c3b180 Move variable blink from ultralcd.h to dogm_lcd_implementation.h 
to avoid warnings about unused blink.

Concentrate definitions of variables in dogm_lcd_implementation.h to one place.

Make only local used variable currentfont static.
 2015-03-28 13:14:38 +01:00
Chris Roadfeldt
059052889f Further Sanity Checks for Z_PROBE_AND_ENDSTOP. 2015-03-28 06:08:04 -05:00
Chris Roadfeldt
8b81f20c61 Filling in more places where Z_PROBE_PIN and Z_PROBE_AND_ENDSTOP need to 
be.
Added Sanity Check for it.
Added hook so it's enabled.
 2015-03-28 05:55:42 -05:00
Chris Roadfeldt
fd823449ad Added serial message for Z Probe trigger. 2015-03-28 05:42:38 -05:00
Chris Roadfeldt
92eb8109ab Fix declaration of old_z_probe_endstop. 2015-03-28 05:09:48 -05:00
Chris Roadfeldt
44b88b41a2 Added credit for code. 2015-03-28 05:01:04 -05:00
Chris Roadfeldt
2979b40a7a Fixed typo in Z Probe and Endstop section. 2015-03-28 04:41:03 -05:00
Chris Roadfeldt
9f3ff14008 Enabled separate Z Probe and Z Axis endstop use at same time. 
Typo fixes in comments in existing code.
 2015-03-28 04:31:51 -05:00
Scott Lahteine
b14be7235e Merge pull request #1585 from galexander1/strtod_e_fix 
Fix `code_value` (so `G1X1E2` isn't evaluated as `G1 X100 E2`)
 2015-03-27 20:49:03 -07:00
Scott Lahteine
ba871e46bf Fix compiler warnings 
- Patched up for most included configurations
 2015-03-27 20:29:05 -07:00
Scott Lahteine
ffe0df4b36 Latest upstream commits 2015-03-27 18:30:56 -07:00
Scott Lahteine
bc2f249cc6 Merge pull request #1622 from AnHardt/tm-utf-minus-kanji 
The big Language Pack
 2015-03-27 18:24:19 -07:00
Scott Lahteine
abfcbd793f Merge pull request #1693 from chris-bo/rework_lcd_beeper 
use only one implementation for beeper feedback
 2015-03-27 17:03:38 -07:00
Scott Lahteine
55739a4efe Fix Z_APPLY_STEP 2015-03-27 17:02:11 -07:00
Scott Lahteine
df02b992b0 Fix redundant_temperatrure_raw setting 2015-03-27 16:37:22 -07:00
Scott Lahteine
fe29bdd72b Also fix temperature externs 2015-03-27 16:26:07 -07:00
Scott Lahteine
578f93bc26 Fixup temp arrays and leveling equation, prepare for merge 2015-03-27 16:20:23 -07:00
Scott Lahteine
7d472367e2 Merge pull request #1713 from epatel/Development 
Parentheses need here otherwise sanitycheck.h does wrong thing on line 222
 2015-03-27 16:14:55 -07:00
Scott Lahteine
ce485175eb Give all temp arrays 4 indices 2015-03-27 16:11:28 -07:00
Edward Patel
782464ea4d Parentheses need here otherwise sanitycheck.h does wrong thing on line 222 2015-03-27 20:22:59 +01:00
Scott Lahteine
460f73056b Fix ECHOPAIR ambiguity 
- Also patch up some warnings
 2015-03-27 00:46:39 -07:00
Scott Lahteine
19d418cd6a Fix up the code to eliminate warnings 2015-03-27 00:32:58 -07:00
Scott Lahteine
b2496533c6 Put " M" into pmem 2015-03-26 20:30:14 -07:00
Scott Lahteine
267d6bef15 Eliminate most warnings 
- Fix a bug reading `code_value` for `M503 Sn`
- Hide and remove unused variables
 2015-03-26 20:07:17 -07:00
Scott Lahteine
3fd7790a15 Merge branch 'Development' into fixup_leveling 
Latest upstream commits
 2015-03-26 19:56:58 -07:00
Scott Lahteine
b76a352d41 Fix the planeNormal calculation 2015-03-26 17:14:07 -07:00
Scott Lahteine
410f64782a Always 4 temp sensors 2015-03-26 16:22:21 -07:00
Scott Lahteine
0b32431551 Remove abs() from planeNormal.z 2015-03-26 16:20:23 -07:00
Scott Lahteine
53169d96e8 Set temp_meas_ready in set_current_temp_raw 2015-03-26 16:02:15 -07:00
Scott Lahteine
06eb7f5b3c Latest upstream commits 2015-03-26 15:30:51 -07:00
Scott Lahteine
04328d7537 Add zprobe_zoffset in set_bed_level_equation_* 
- Also a small tweak to SanityCheck.h
 2015-03-26 15:29:16 -07:00
Scott Lahteine
d2e73545ba Merge pull request #1705 from AnHardt/ddt 
Avoid warnings in SanitiCheck.h
 2015-03-26 15:16:37 -07:00
Scott Lahteine
78090275a9 Fix probe range editing 
- Increase the probe offset range to -20…20
- Apply the range limits to the menu item
 2015-03-26 13:52:48 -07:00
AnHardt
1ff6df8f9e Avoid warnings in SanitiCheck.h 
/SanityCheck.h:107:53: warning: missing terminating ' character
...
 2015-03-26 21:30:53 +01:00
AnHardt
ebe5b87c2c < like in the oher compareble loops 
to avoid:
Marlin_main.cpp:1790: warning: array subscript is above array bounds.
 2015-03-26 21:18:19 +01:00
AnHardt
20f909567a Merge https://github.com/MarlinFirmware/Marlin into tm-utf-minus-kanji 
Conflicts:
	README.md
Solved
 2015-03-26 10:05:00 +01:00
Christian Bohn
eab5fad539 code formatting 2015-03-26 09:00:34 +01:00
Scott Lahteine
abadeac08d Group zprobe_zoffset with bed leveling 2015-03-25 23:06:33 -07:00
Scott Lahteine
9e8427f253 Merge pull request #1698 from zeuseye/Development 
Clean "fromsd" array if not SDSUPPORT
 2015-03-25 22:21:57 -07:00
Scott Lahteine
32331faee4 Prettify Bed Level Correction Matrix 
- Put + in front of positive values in the output
 2015-03-25 22:13:59 -07:00
Scott Lahteine
f5f4c2b366 Merge branch 'Development' into fixup_leveling 
Latest upstream commits
 2015-03-25 21:30:49 -07:00
Scott Lahteine
7667023817 Merge pull request #1694 from Wurstnase/fix_z_config 
comment #define Z_DUAL_STEPPER_DRIVERS
 2015-03-25 21:28:17 -07:00
Scott Lahteine
5eff15c409 Merge branch 'Development' into fixup_leveling 
Latest upstream commits
 2015-03-25 21:24:38 -07:00
Scott Lahteine
ad05a726c1 Merge pull request #1691 from AnHardt/PID_dt 
Move definition of PIDdT back to temperature.h
 2015-03-25 21:22:39 -07:00
Scott Lahteine
5261d35737 Fix custom m-code behavior 
Don’t set CUSTOM_M_CODE_SET_Z_PROBE_OFFSET if there’s no Z probe
 2015-03-25 21:20:50 -07:00
Scott Lahteine
fbf9b21e0c Merge plus fixup zprobe_zoffset 
- Make `zprobe_zoffset` conditional
- Fix ConfigurationStore for `zprobe_zoffset`
 2015-03-25 21:14:00 -07:00
Scott Lahteine
96b5da7198 Fix up bed leveling code 
- Init `zprobe_zoffset`
- Remove `current_position[Z_AXIS] = zprobe_zoffset` lines from the
`set_bed_level_equation_*` functions
- Apply standards to `mesh_bed_leveling` files
- Document `MESH_BED_LEVELING`
 2015-03-25 20:36:24 -07:00
Scott Lahteine
02b4f5f9cd Merge pull request #1689 from AnHardt/MAXand161 
Fix MAX6675 again and introduce set_current_temp_raw()
 2015-03-25 20:23:51 -07:00
AnHardt
f680e509c4 Enclosed error-messages for TEMP_SENSOR_1_AS_REDUNDANT in PSTR() 2015-03-25 23:26:06 +01:00
Victor Torre
d43d47da14 Clean "fromsd" array is not SDSUPPORT 
if not have SDSUPPORT the fromsd array is not necessary
 2015-03-25 22:05:18 +01:00
AnHardt
ac81b4084f Make variables and function static. 2015-03-25 21:37:15 +01:00
alexborro
55025558dc Implement Dry-Run mode in G29 
It just probe all the bed without appliying the matrix.
Useful after a first G29 to check the topology.
 2015-03-25 11:12:30 -03:00
wurstnase
a4ad9117dd comment #define Z_DUAL_STEPPER_DRIVERS 2015-03-25 13:46:29 +01:00
chris-bo
2dfd0e5ce7 Update Configuration.h 
documentation how to disable buzzer feedback
 2015-03-25 12:44:29 +01:00
Christian Bohn
4c3cbc0961 use only one implementation for beeper feedback 2015-03-25 12:23:50 +01:00
AnHardt
01cc97a3c3 Corected condition for PIDdT 2015-03-25 12:08:23 +01:00
AnHardt
94330705c7 Move definition of PIDdT back to temperature.h 
make it unconditional
remove all definitions in the 'Configuration.h's
remove form 'Conditionals.h'
 2015-03-25 11:51:41 +01:00
AnHardt
dd0067afa6 Fix MAX6675 again and introduce set_current_temp_raw() 
to make the temperature-code work again with Arduino 1.0.6.

Sorry could not make an extra block on base level.
 2015-03-25 11:08:24 +01:00
AnHardt
8848b7e9ef Add the missed {} to END_MENU in ultralcd.cpp 
what caused an extra update of encoderLine most of the time.
 2015-03-25 09:48:21 +01:00
AnHardt
4beffbca69 Make SMALL_INFOFONT configurable. 
Tweak the documentation
 2015-03-24 23:40:04 +01:00
CONSULitAS
045ea42cc8 Merge remote-tracking branch 'upstream/Development' into Development 2015-03-24 22:52:02 +01:00
alexborro
c2ba5d0c09 Fix ZigZag and Topograph table 
ZigZag: Inverted Behavior.. If T supplied, it does not zigzag.
Topograph table: The table was rotated 90º clockwise.
 2015-03-24 15:50:31 -03:00
alexborro
0ce3576685 New Feature: Z_DUAL_ENDSTOPS 
Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z
steppers - Let's call them Z stepper and Z2 stepper.
That way the machine is capable to align the bed during home, since both
Z steppers are homed.
There is also an implementation of M666 (software endstops adjustment)
to this feature.
After Z homing, this adjustment is applied to just one of the steppers
in order to align the bed.
One just need to home the Z axis and measure the distance difference
between both Z axis and apply the math: Z adjust = Z - Z2.
If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it
is.. think about it) and the Z adjust would be positive.
Play a little bit with small adjustments (0.5mm) and check the
behaviour.
The M119 (endstops report) will start reporting the Z2 Endstop as well.
 2015-03-24 14:06:44 -03:00
AnHardt
c686069ccd Revert "Remove 6x9 font" 
This reverts commit e6cb8ee188.

Conflicts:
	Marlin/dogm_lcd_implementation.h
Confilkt solved
Needs rework.
 2015-03-24 17:13:05 +01:00
AnHardt
b00a531df8 Revert "Removed now unneded FONT_STATUSMENU" 
This reverts commit 8c5bb38748.
 2015-03-24 17:01:56 +01:00
AnHardt
9d589cbb2a Merge https://github.com/MarlinFirmware/Marlin into tm3-utf-minus-kanji 
Conflicts:
	Marlin/example_configurations/delta/generic/Configuration.h
	Marlin/example_configurations/delta/kossel_mini/Configuration.h
	Marlin/language.h

Conflicts solved
 2015-03-24 16:59:15 +01:00
Scott Lahteine
8db4fd7177 Merge branch 'Development' into planner_oh_planner 
Latest upstream commits
 2015-03-23 22:08:50 -07:00
Scott Lahteine
0d81abe1c9 Merge branch 'Development' into config_testing 
Latest upstream commits
 2015-03-23 21:13:04 -07:00
Scott Lahteine
01740fd9c6 Merge branch 'Development' into planner_oh_planner 
Latest upstream commits
 2015-03-23 21:12:36 -07:00
Scott Lahteine
fc53e43de6 Don't test raw temp for MAX6675 
- Remove test of raw temp for thermistor 0 when using MAX6675
- Longer `raw_temp_value` array for `TEMP_SENSOR_1_AS_REDUNDANT`
 2015-03-23 20:55:48 -07:00
Scott Lahteine
03fa9fae9f Merge branch 'Development' into fix_temperature_minmax 
Latest upstream commits
 2015-03-23 20:42:48 -07:00
Scott Lahteine
1fac388664 Revert measurement loop 2015-03-23 15:18:22 -07:00
CONSULitAS
703f3b38c4 Merge remote-tracking branch 'upstream/Development' into Development 2015-03-23 17:40:49 +01:00
nicolas-rambaud
37cde8a191 Report changes from previous PR from old code base including : 
I've updated the minimum values from the LCD.
It has been a while that i want to at least fix this.
I have an inductive probe and often i need to set my zOffset to something lower than 0.5.
With the current implementation, the default LCD value is set to 0.5 for some reason.
On my case i need to be able to set it down to 0.0 as my inductive probe can be lower than 0.5.
Before with the LCD we couldn't change this value below 0.5. We had to flash the firmware every time which was painful.
Now we are able to change this value down to 0.0 if needed.
I've also changed the minimum value for Z min acceleration.
In the default configuration it's set to 25 but on the LCD the minimum was 100 which is not coherent.
I've changes the minimum to 10. On this axis, depending on the mechanics/motor drivers we might require very low acceleration, so i guess 10 is somehow realistic.
 2015-03-23 12:29:12 +01:00
Scott Lahteine
b26a3ea02c Merge pull request #1662 from josla972/refactor_scara 
Refactor SCARA calibration. Save some lines of code and possibly ROM.
 2015-03-23 00:51:18 -07:00
wurstnase
e6f6c6e3a1 fix bad insertion config again 2015-03-23 08:32:48 +01:00
Scott Lahteine
6bdee87be3 Cleanup temperature code 
- Get rid of unused temp states in the ISR, resulting in more frequent
temperature reading with fewer sensors
- Shrink code slightly in min/max testing
 2015-03-23 00:27:29 -07:00
Scott Lahteine
34a41648ab Merge branch 'Development' into planner_oh_planner 
Latest upstream commits
 2015-03-22 23:40:29 -07:00
Scott Lahteine
4fbb80567e Get upstream commits 2015-03-22 23:07:22 -07:00
Scott Lahteine
7717e1ce33 Fix bad insert in configuration 2015-03-22 21:48:46 -07:00
Scott Lahteine
146501215f Fix mangled probe_pt calls 
- Address issue #1669
- Remove the TOPO_ORIGIN configuration setting
 2015-03-22 21:45:20 -07:00
maverikou
15345cc249 Corrected Z_PROBE_ALLEN_KEY behaviour. 2015-03-22 13:54:51 +02:00
maverikou
0f034dd97e Clean up Z_RAISE_AFTER_PROBING to work the same in all code paths except Z_PROBE_SLED. 2015-03-22 13:54:45 +02:00
maverikou
6c96f32069 Blind fix for #1507 2015-03-22 13:54:21 +02:00
Josef Larsson
379348487e Removed malplaced comment. 2015-03-22 12:21:31 +01:00
Scott Lahteine
8bd6e37b21 Merge pull request #1661 from thinkyhead/G92_no_offset 
Don't add home offsets in G29
 2015-03-21 16:49:06 -07:00
Scott Lahteine
582cd780cd Fix compile error with *_DUAL_STEPPER_DRIVERS 
- Patch up macros in stepper.cpp
 2015-03-21 16:43:47 -07:00
Josef Larsson
9b3462f73f Refactor SCARA calibration. Save some lines of code and possibly ROM. 2015-03-22 00:37:24 +01:00
Scott Lahteine
691e753cc3 Don't add home offsets in G29 
- Address #1262 by leaving values as set
- Rename `add_homing` to `home_offset`
 2015-03-21 16:30:02 -07:00
Scott Lahteine
88e81a4804 Latest upstream commits, plus fixes 
- Also add Manual Bed Leveling to the rest of the configs
 2015-03-21 16:12:57 -07:00
Scott Lahteine
15eb5d35a2 Merge branch 'Development' into config_testing 
Latest upstream commits
 2015-03-21 15:42:45 -07:00
Scott Lahteine
19df90622b Include Conditionals.h file in update 2015-03-21 15:40:20 -07:00
Scott Lahteine
9b639b4135 Merge pull request #1619 from epatel/manual-bed-leveling+mesh-bed-level 
Manual bed leveling + mesh bed leveling
 2015-03-21 15:39:42 -07:00
Scott Lahteine
2c9bd15625 Move LCD items to Conditionals.h 
- `Conditionals.h` is included twice, setting LCD values the first time
 2015-03-21 15:24:57 -07:00
Scott Lahteine
63abeaff38 Merge branch 'Development' into config_testing 
Latest upstream commits
 2015-03-21 15:03:06 -07:00
Scott Lahteine
3703694e30 Fix temperature min/max test 
- Base tests on all thermistors/thermocouples, not just heater 0
 2015-03-21 14:23:43 -07:00
Edward Patel
3d0a060a7a Added G29 command 2015-03-21 14:50:47 +01:00
Edward Patel
c516747847 Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 2015-03-21 14:49:52 +01:00
Scott Lahteine
af14c684b5 Minor optimizations to planner code 
- Prefetch values used more than once
 2015-03-20 20:57:06 -07:00
Scott Lahteine
13fbf42d95 Cleanup of planner code 
- Use named axis indexes, `X_AXIS` etc.
- Replace `block.steps_A` with block.steps[A]`
- Replace `A_segment_time` with `segment_time[A]`
- Add `A_AXIS`, `B_AXIS` for `COREXY` axes
- Conditional compile based on `EXTRUDERS`
- Add BLOCK_MOD macro for planner block indexes
- Apply coding standards to `planner.h` and `planner.cpp`
- Small optimizations of planner code
- Update `stepper.cpp` for new `block` struct
- Replace `memcpy` with loops, let the compiler unroll them
- Make `movesplanned` into an inline function
 2015-03-20 20:42:49 -07:00
AnHardt
64e3d33893 Fix shrinked menucode 
by updating 'encoderPosition' in END_MENU() line 1.
 2015-03-20 23:36:14 +01:00
Edward Patel
a7e89d4cfa Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 2015-03-20 15:46:01 +01:00
AnHardt
8c5bb38748 Removed now unneded FONT_STATUSMENU 2015-03-20 14:12:12 +01:00
Scott Lahteine
2176a22d42 Fix count_direction initializer 
- Addressing #1625
 2015-03-20 05:45:05 -07:00
AnHardt
e72cb3e45d Merge https://github.com/MarlinFirmware/Marlin into tm2-utf-minus-kanji 
Conflicts:
	Marlin/dogm_lcd_implementation.h
	Marlin/ultralcd_implementation_hitachi_HD44780.h

Fix merge conflicts 2
 2015-03-20 13:35:47 +01:00
Scott Lahteine
cb6942d4a7 Merge branch 'Development' into config_testing 
Get upstream commits
 2015-03-20 05:30:36 -07:00
AnHardt
6bfccaf99e Merge https://github.com/MarlinFirmware/Marlin into tm2-utf-minus-kanji 
Conflicts:
	Marlin/dogm_lcd_implementation.h
	Marlin/ultralcd_implementation_hitachi_HD44780.h
Fixed conflicts 1
 2015-03-20 13:08:18 +01:00
Scott Lahteine
5644ad6809 Fix hiliting of edit items 2015-03-20 04:29:35 -07:00
Scott Lahteine
63d5d28085 Merge branch 'Development' into config_testing 
Latest upstream changes
 2015-03-20 04:15:18 -07:00
Scott Lahteine
526a755a66 Merge pull request #1652 from AnHardt/PIDdebug 
PID debug
 2015-03-20 04:14:08 -07:00
Scott Lahteine
a1c240b0a4 Delta supports some auto bed leveling options 2015-03-20 04:04:45 -07:00
Edward Patel
5112cf8422 Added comment for the EEPROM storage 2015-03-20 11:46:47 +01:00
Edward Patel
4619d80524 Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 2015-03-20 11:45:06 +01:00
Scott Lahteine
199151a4ed Merge pull request #1650 from AnHardt/beautify 
Beautivy statusscreen
 2015-03-20 03:38:02 -07:00
Scott Lahteine
2424713a8f Merge pull request #1640 from AnHardt/warning6 
codepos not used in gcode_M28()
 2015-03-20 02:58:00 -07:00
Scott Lahteine
b6d381f863 Divide up Conditionals to get LCD items early 2015-03-20 02:50:28 -07:00
AnHardt
e85061d20d Added changes to the 'new' Configuration.h s 2015-03-20 10:36:29 +01:00
Scott Lahteine
33c7c6e11d Conditionals.h requires Arduino.h 2015-03-20 01:27:14 -07:00
Scott Lahteine
8ade04b78e Felix and Hephestos configs 
- Not sure why these are showing as all new
 2015-03-19 22:25:05 -07:00
Scott Lahteine
670006b919 Remove invariant code from Configurations 
- Add `Conditionals.h` with calculated configuration values
- Add `SanityCheck.h` with checks for configuration errors
- Remove equivalent code from all configurations
- Move error checks from some sources to `SanityCheck.h` also
- Fix initialization of count_direction in stepper.cpp
 2015-03-19 22:22:23 -07:00
Edward Patel
a61f679568 Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 2015-03-20 02:28:35 +01:00
Edward Patel
c87faa69ed Shortened mesh_plan_buffer_line() 2015-03-20 02:18:49 +01:00
AnHardt
47c1ea72af Merge https://github.com/kieranc/Marlin into PIDdebug 
Conflicts:
	Marlin/temperature.cpp

Cleaned merge conflict.

Codeposition had changed.
Variable pid_input had vanished.

Signed-off-by: AnHardt <github@kitelab.de>
 2015-03-20 00:07:36 +01:00
AnHardt
f1d3d1524d Merge branch 'optimize_menu_code' of https://github.com/thinkyhead/Marlin into beautify 
Conflicts:
	Marlin/dogm_lcd_implementation.h

solved merge conflict.
 2015-03-19 22:51:22 +01:00
AnHardt
fa889cd6e1 Beautivy statusscreen 
by shifting things some pixels around
 2015-03-19 22:13:37 +01:00
Scott Lahteine
7279e4f82f Small code tweaks re lcd.print 2015-03-19 14:01:33 -07:00
Scott Lahteine
90ba61b9b8 Include indicator for new drawmenu_generic 
In the new method we pass the character that should be used for
selected state, not the character to print always.
 2015-03-19 13:49:06 -07:00
Scott Lahteine
15d29efad5 Pass sel to lcd_implementation_mark_as_selected 
- Pass selected state directly to lcd_implementation_mark_as_selected
- Rename sel function parameter
- Include a minor fix for SdBaseFile.h
 2015-03-19 13:40:36 -07:00
Scott Lahteine
a547dc2148 Merge branch 'Development' into optimize_menu_code 
Get upstream changes
 2015-03-19 13:31:37 -07:00
CONSULitAS
9c1f6e7ac7 Merge remote-tracking branch 'upstream/Development' into Development 2015-03-19 18:49:34 +01:00
alexborro
e650d4044e Fix "Stop Print" function in the LCD menu 
When one hit "Stop Print" option in LCD menu, the command buffer was not
cleared. The printer keep moving until the buffer has been emptied.
Actually I could not clear the command buffer as well.. I don't know
why, it doesnt work as expected.
I need to implement a routine inside Stepper ISR to handle such
situation.
 2015-03-19 14:16:18 -03:00
AnHardt
e917477fec Merge https://github.com/MarlinFirmware/Marlin into tm-utf-minus-kanji 
Conflicts:
	Marlin/dogm_lcd_implementation.h
	Marlin/fonts/make_fonts.bat

Claerd conflicts with my own #1621. (His was easy. :-) )

corrected typo in fonts/README.fonts

Applied changes to the new delta-configurations
 and deletet there some extra whitespace at the line-endings.
 2015-03-19 12:35:43 +01:00
AnHardt
ae01a6b5f2 Make use of codepos. 
Saves one addition.
Needs one pointer on the stack.

Don't know if this is a go trade.
 2015-03-19 09:45:16 +01:00
Scott Lahteine
a534ac197a Merge pull request #1621 from AnHardt/remove--6x9-font 
Remove 6x9 font
 2015-03-18 23:10:42 -07:00
Scott Lahteine
80e0ee10ca Merge pull request #1631 from AnHardt/iss1593 
Decrease KILL_DELAY
 2015-03-18 19:10:38 -07:00
Scott Lahteine
4ce79920e5 Merge pull request #1635 from AnHardt/warnings1 
Negative times are unlikly
 2015-03-18 19:10:12 -07:00
Scott Lahteine
76127b8a55 Merge pull request #1630 from Wurstnase/fix_g29 
optional parameters must be named when ignoring order
 2015-03-18 19:09:40 -07:00
Scott Lahteine
be3f2dc1d9 Merge pull request #1636 from AnHardt/warning2 
lcd_control_retract_menu() is conditional.
 2015-03-18 19:09:05 -07:00
Scott Lahteine
8d396584bf Merge pull request #1637 from AnHardt/warning3 
lcd_autostart_sd() has two conditions.
 2015-03-18 19:08:33 -07:00
Scott Lahteine
8664c6d465 Merge pull request #1638 from AnHardt/warning4 
delta[3] not used when DELTA not defined.
 2015-03-18 19:07:55 -07:00
Scott Lahteine
10711ccc6a Merge pull request #1639 from AnHardt/warning5 
G4 could wait for an undefined time
 2015-03-18 19:07:14 -07:00
Edward Patel
28c91deb5c EEPROM saving of z_values. 
Tried to make it a little intelligent.
 2015-03-18 21:07:07 +01:00
Edward Patel
240b5cfe04 Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 2015-03-18 19:19:46 +01:00
alexborro
4521f6655b Restore "S" parameter of M204 for retrocompatibility. 2015-03-18 12:19:30 -03:00
alexborro
5ddb8d94e2 Update Documentation related to M204 2015-03-18 11:09:10 -03:00
AnHardt
f8c4d43886 delta[3] is used with SCARA 
Shoot in the dark.
 2015-03-18 12:14:49 +01:00
AnHardt
72a9fed4fb codepos not used in gcode_M28() 
Got:
Marlin_main.cpp:2567: warning: unused variable 'codepos'

Needs revision.
Don't now how this should look like.
 2015-03-18 11:41:14 +01:00
AnHardt
b94dd33641 G4 could wait for an undefined time 
Got:
Marlin_main.cpp:1689: warning: 'codenum' may be used uninitialized in this function

And indeed codenum is undefined when no parameter is given.
 2015-03-18 11:23:41 +01:00
AnHardt
e90985a4e8 delta[3] not used when DELTA not defined. 
got:
Marlin_main.cpp:387: warning: 'delta' defined but not used

Compiles cleaner when definition is removed.
 2015-03-18 11:11:49 +01:00
AnHardt
5099b86ad4 lcd_autostart_sd() has two conditions. 
got:
ultralcd.cpp:408: warning: 'void lcd_autostart_sd()' defined but not used
 2015-03-18 10:51:13 +01:00
AnHardt
5d81c779cc lcd_control_retract_menu() is conditional. 
Got:
ultralcd.cpp:64: warning: 'void lcd_control_retract_menu()' declared 'static' but never defined
 2015-03-18 10:39:59 +01:00
AnHardt
450b89e63c Negative times are unlikly 
While bunting an other bug I stumbled across:
ultralcd.cpp:1250: warning: comparison between signed and unsigned
integer expressions
Changed to the type of lcd_next_update_millis.
 2015-03-18 10:31:34 +01:00
AnHardt
d1658eebfc Decrease KILL_DELAY 
Users hat to press kill-button for unexpexted lon times.
See #1593
 2015-03-18 01:45:42 +01:00
Wurstnase
00adb2a6c1 optional parameters must be named when ignoring order 2015-03-18 01:02:29 +01:00
Edward Patel
0d43898a22 Remove of mesh_plan_buffer_line parameter reference (e) 2015-03-17 22:55:29 +01:00
Edward Patel
8067a985ce Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 
Fixed conflicts:
	Marlin/planner.h
 2015-03-17 22:48:08 +01:00
wurstnase
05333f61b7 fix macro 2015-03-17 12:50:44 +01:00
AnHardt
1883e1bb60 Applied thinkyheads corrections from 2015-03-17 2015-03-17 11:23:44 +01:00
AnHardt
be79235ef2 Add new (cleaner) Marlin font 
with sources in /fonts
 2015-03-17 10:33:02 +01:00
Scott Lahteine
89fe77468d Merge pull request #1586 from maverikou/delta_auto_bed_level 
Delta auto bed level (Updated PR)
 2015-03-16 18:17:11 -07:00
CONSULitAS
2b1ddc0413 Merge remote-tracking branch 'upstream/Development' into Development 2015-03-16 22:12:17 +01:00
alexborro
cb676cdf39 Fix CoreXY homing bug introduced by PR #1606 
The Check Endstop logic must be:

if (current_block->steps_x != current_block->steps_y || (TEST(out_bits,
X_AXIS) == TEST(out_bits, Y_AXIS)))
if (TEST(out_bits, X_HEAD))

not

if (TEST(out_bits, X_HEAD) && (current_block->steps_x !=
current_block->steps_y || (TEST(out_bits, X_AXIS) == TEST(out_bits,
Y_AXIS))))

Same applies for Y axis.
 2015-03-16 16:31:25 -03:00
AnHardt
8a29dd4839 Cleaned typo in dogm_lcd_implementation.h 2015-03-16 20:18:48 +01:00
AnHardt
7e69f72db6 Moved font directory. Updated README.fonts 2015-03-16 17:27:27 +01:00
AnHardt
00b162a993 Merge remote-tracking branch 'origin/utf-kanji' into tm-utf-minus-kanji 
Conflicts:
	Marlin/language.h
Conflict cleaned
 2015-03-16 17:13:49 +01:00
AnHardt
e38dd5f030 Merge remote-tracking branch 'origin/utf' into utf-kanji 2015-03-16 17:00:54 +01:00
AnHardt
08e4651ece Corrected cyrillic font again 
Thank you @Nprod.
 2015-03-16 16:59:14 +01:00
Wurstnase
752c804677 remove offset, add minimum scan area 2015-03-16 15:13:16 +01:00
Wurstnase
14f0250853 allow negative values 
and some more comments
 2015-03-16 14:26:59 +01:00
AnHardt
e6cb8ee188 Remove 6x9 font 
in dogm_lcd_implementation.h
by using standard font and
shifting down temperature displays by one pixel
Saves 2300 bytes.
 2015-03-16 11:18:27 +01:00
maverikou
e93eb3e8d3 Update test 2015-03-16 09:16:00 +02:00
maverikou
b8ae3feb9e Update test 2015-03-16 09:03:15 +02:00
maverikou
3570447ded Fix Z_RAISE_AFTER_PROBING 2015-03-16 08:35:49 +02:00
maverikou
8a739b6fba Merge branch 'Development' into delta_auto_bed_level 
Conflicts:
	Marlin/Marlin_main.cpp
 2015-03-16 08:24:26 +02:00
Scott Lahteine
7629c4f05c Cleanup for menu optimization 
- Compare pr_char to space
- Fewer calls to lcd_strlen
 2015-03-15 22:54:54 -07:00
Scott Lahteine
3405f85a6a Reduce size of menu code 
- Get rid of _selected functions, passing selected state instead
 2015-03-15 22:02:33 -07:00
Edward Patel
e983a5ab92 Disable option. Enable for use/test. 2015-03-16 02:50:11 +01:00
Edward Patel
f34b9c83d1 Added comment about MESH_NUM axis points. 2015-03-16 01:48:46 +01:00
Scott Lahteine
a686c9878f Move TOPO_ORIGIN define to Configuration.h 
- Addressing issue #1608
 2015-03-15 15:49:36 -07:00
Edward Patel
8005d22c81 Added menu option for bed leveling. 2015-03-15 23:24:32 +01:00
Edward Patel
0e51e53813 WIP. Adding bed leveling code. 2015-03-15 23:24:32 +01:00
Scott Lahteine
d0d12962e0 Merge pull request #1615 from AnHardt/fix-1611 
Fix #1611
 2015-03-15 15:19:02 -07:00
AnHardt
f0dcea7e14 Fix #1611 
Warning: suggest parentheses around comparison in operand of &

pretty much helped.
 2015-03-15 22:52:50 +01:00
AnHardt
28b1c37dea Fix for #1612 2015-03-15 21:35:33 +01:00
CONSULitAS
a8c1bdabd2 Update: readme.md for K8200 example 
* readme.md: updated typo and URLs
 2015-03-15 17:25:31 +01:00
AnHardt
2f374f1465 Removed Kanji. 2015-03-15 16:44:37 +01:00
Scott Lahteine
5efc798642 Merge pull request #1546 from apollo-ng/pr-felix 
Added support for Felix 2.0/3.0 printers
 2015-03-15 07:52:22 -07:00
Scott Lahteine
b83e52e50f Merge pull request #1467 from thinkyhead/marlin_configurator 
Configurator utility
 2015-03-15 07:49:19 -07:00
Scott Lahteine
7bc77dc134 Merge pull request #1583 from galexander1/m404fix 
M404 should not use 'N' address as parameter because 'N' is reserved
 2015-03-15 07:47:30 -07:00
Scott Lahteine
b80ed51fcc Fix controllerFan() code 
- Add support for 4th extruder
- Fix parentheses matching
- Apply coding standards
- Address issue mentioned at #1575
 2015-03-15 06:55:31 -07:00
Scott Lahteine
4b50205f11 Merge branch 'Development' into marlin_configurator 
Latest upstream changes
 2015-03-15 06:37:32 -07:00
Scott Lahteine
bb4cb1b15a Merge pull request #1606 from thinkyhead/cleanup_stepper 
Cleanup of stepper.cpp
 2015-03-15 06:05:08 -07:00
Scott Lahteine
63f41f56f8 Merge pull request #1607 from chris-bo/Development 
Update ultralcd_st7920_u8glib_rrd.h
 2015-03-15 01:04:40 -07:00
Scott Lahteine
4eabd80025 Fix babystep for extruder_duplication 2015-03-14 18:31:25 -07:00
alexborro
d3259d0dba Merge pull request #1581 from msutas/Development 
Filament Runout Sensor Feature
 2015-03-14 18:35:20 -03:00
AnHardt
25c4f17e5d Corrected Cyrillic fonts. Round II. 2015-03-14 15:10:45 +01:00
chris-bo
b73ba26b23 Update ultralcd_st7920_u8glib_rrd.h 2015-03-14 14:31:00 +01:00
Scott Lahteine
c37f7d15c9 - Rename WRITE_E_STEP for consistency 
- Add BIT and TEST macros
- Add _APPLY_ macros to stepper.cpp to help with consolidation
- Consolidate code in stepper.cpp using macros
- Apply standards in stepper.cpp
- Use >= 0 instead of > -1 as a better semantic
- Replace DUAL_Y_CARRIAGE with Y_DUAL_STEPPER_DRIVERS
 2015-03-14 04:28:22 -07:00
AnHardt
44a205d9d9 Corrected Cyrillic fonts. 
Cleaned typo in language_test.h Cyrillic part.
 2015-03-14 12:27:47 +01:00
chrono
4d878b9bac Fixed path typos in README 2015-03-14 10:18:12 +00:00
chrono
12ec557a75 Added DEFAULT_TRAVEL_ACCELERATION 2015-03-14 10:14:13 +00:00
chrono
1d25d510bc Upstream Merge Fixes 2015-03-14 09:48:30 +00:00
chrono
a89d690b77 Merge remote-tracking branch 'upstream/Development' into pr-felix 2015-03-14 09:25:43 +00:00
Scott Lahteine
cb57fc727d Declare pid_output for PIDBEDTEMP 2015-03-13 20:19:51 -07:00
Scott Lahteine
3d6deb9bdf Simplify manage_heater 
- Make separate get_pid_output(e) and get_pid_output_bed() function
- Reduce size of manage_heater function
- Hopefully work around linker errors
 2015-03-13 19:49:41 -07:00
AnHardt
730497aaa1 Make use of ligatures in language_kana_utf8.h 2015-03-13 19:47:40 +01:00
AnHardt
3240d89f7d Logic cleanup in utf_mapper. 2015-03-13 19:45:10 +01:00
alexborro
2f3c77b751 Fix decimal places in G29 Bed Equation Coeficients 2015-03-13 14:39:41 -03:00
AnHardt
96f8d20f2f Change selection logic another time 
Automatic selection was to unflexible.

Updated documentation

Updated language files to new logic and documentation.

Updated bdf2u8g.exe
 2015-03-13 14:26:58 +01:00
Wurstnase
76da32b567 add hash-bang for python3 2015-03-13 07:44:20 +01:00
Wurstnase
2e7ba44633 some renaming for readability 2015-03-13 07:31:27 +01:00
Scott Lahteine
352aa3f4c5 Merge branch 'Development' into marlin_configurator 
Latest upstream
 2015-03-12 17:12:51 -07:00
Scott Lahteine
e3ca9137b5 Fix missing temp_error declarations 
- Fix for #1591 replacing #1595
 2015-03-11 16:38:42 -07:00
Wurstnase
0620267ebb g29 auto-mode for the new G29 LRFB 
short:
this script scans the first few lines from a gcode. If the line between 2 different z are greater than min_g1 this is our first layer. On this layer we search the min and max values of X and Y. With an offset we write that in a new file.
 2015-03-11 23:53:28 +01:00
Scott Lahteine
08694339eb Merge branch 'Development' into marlin_configurator 
Conflicts:
	Marlin/Configuration.h
 2015-03-11 15:47:32 -07:00
Scott Lahteine
e4d77a6313 Merge pull request #1554 from 2PrintBeta/Development 
Macro indirection for stepper drivers + Support for TMC26X and L6470 Stepper Drivers
 2015-03-11 15:31:57 -07:00
Mehmet Sutas
b373826428 Merge pull request #2 from MarlinFirmware/Development 
update
 2015-03-12 00:07:39 +02:00
AnHardt
5bafb1fe1f Add user test to language_test.h and make it default. 
Improve description in Configuration.h
 2015-03-11 20:46:52 +01:00
alexborro
c0b6075f77 Fix max acceleration limits in planner 
The max acceleration limiting was in wrong place.
 2015-03-11 15:08:11 -03:00
alexborro
9157cbd8f3 Add Travel Acceleration and change the M204 options 
Added option to set Travel Acceleration (non printing moves).
The M204 options was a non sense (S for printing moves and T for retract
moves).

It has been changed to:
P = Printing moves
R = Retract only (no X, Y, Z) moves
T = Travel (non
printing) moves

I will add this info o G-Code wiki in reprap.org. I also advise to put
this info in Marlin next version changelog.
 2015-03-11 13:19:02 -03:00
alexborro
888cf161bd fix travel speed option for G29 
I forgot to enclousure the variable with #ifdef
 2015-03-11 10:03:32 -03:00
alexborro
af63b54562 Add travel speed option to G29 command line 2015-03-11 09:51:56 -03:00
AnHardt
817751d4b9 Added new languages, the Cyrillic display and a test language to find out your hardware. 2015-03-11 11:10:35 +01:00
AnHardt
c4b0087f7a Insert utf_mapper.h 
Top -> down
- Decide what output function is to use.
- Precautions. If non of the DISPLAY_CHARSET_HD44780's is selected fall back to Japanese.
- When we are not on the dogms setup a mapping table depending on display type and mapper.
- If we are on dogm we use ONE To ONE mapping - except kanji.
- select and define one of the mapping functions.
 2015-03-11 10:55:16 +01:00
AnHardt
b60761bcff Removed some messages that shouldn't be translated in the Japanese files. 
And made falback to kana work.
 2015-03-11 10:30:38 +01:00
AnHardt
97ae3c5c6a Corected some errors inrtoduced by a faild global replacement. 2015-03-11 10:26:36 +01:00
AnHardt
ae76b1e8a8 Changes in dogm_lcd_implementation.h in detail. 
Top -> down
- We don't need the old Marlion_font package any more - we made new.
- But we need information about configured fonts and the mappers.
- We support Cyrillic now.
- LCD_CLASS is not used in this file. LiquidCrystalRus.h is deleted anyway.
- define some fonts
- BIG_EDIT_FONT works only together with western languages.
- Select a matching FONT for the MENUE depending on the defined language.
- Number the different font-types. Wanted to avoid to store complete font-structures when changing fonts back and forth.
- Marlin special symbols are now at the lower end - like in 'ultralcd_implementation_hitachi_HD44780.h'
- insert the new remembering setFont function.
- insert the new counting lcd_print functions.
- make use of the new setFont and lcd_print functions.
- On some places redefined one character long strings with chars to avoid overhead and reduce warnings.
 2015-03-10 22:34:56 +01:00
alexborro
5bf42066fa Fix typo in configuration.h 2015-03-10 15:06:34 -03:00
alexborro
8a4b62d081 Set more regular setup in configuration.h 2015-03-10 14:41:21 -03:00
AnHardt
255ca68123 Changes in ultralcd_implementation_hitachi_HD44780.h in detail 
Top -> down:
We don't need LiquidCrystalRus.cpp and LiquidCrystalRus.h any more. Functionality is now in utf_mapper.h
Comment on LCD_STR_BEDTEMP about behaviour in strings.
Change LCD_STR_ARROW_RIGHT from "\x7E" to ">" because "\x7E" is only ARROW_RIGHT on displays with DISPLAY_CHARSET_HD44780_JAPAN.
Introduce the counting UTF8 enabled lcd_print functions.
Replace the old lcd.print functions and make use of them.
A bit of reformatting around the changes.
 2015-03-10 18:30:09 +01:00
alexborro
60ceca1bc1 Add speed configuration for home-bumping movement 2015-03-10 14:08:32 -03:00
AnHardt
6fc2ccd568 Make use of new remenbering fontswitch. 2015-03-10 18:04:03 +01:00
AnHardt
0f26f3abf2 Add a test_language. 
Will show the compleet utf8 or ASCII charset
To se the second half of ASCII click on "01234..."
 2015-03-10 17:59:28 +01:00
AnHardt
901cf203fe Add legal stuff to marlin_kanji.h 2015-03-10 17:49:16 +01:00
AnHardt
2d5134b0ed Introduce - clean - prepae language files 2015-03-10 17:46:25 +01:00
domonoky
d813090d90 Merge remote-tracking branch 'remotes/upstream/Development' into Development 
Conflicts:
	Marlin/Marlin_main.cpp
	Marlin/stepper.cpp
 2015-03-10 10:46:37 +01:00
Scott Lahteine
c321c97f35 Merge pull request #1584 from galexander1/stringcleanup 
fix a handful of cases where strtod() was cast to int, instead of just using strtol()
 2015-03-10 01:48:30 -07:00
maverikou
53abc5e2f1 Merge branch 'Development' into delta_auto_bed_level 2015-03-09 22:28:57 +02:00
Mehmet Sutas
956fb2d278 Merge pull request #1 from MarlinFirmware/Development 
update
 2015-03-09 11:05:49 +02:00
Scott Lahteine
978dadf806 Base64 decode AJAX-fetched text properly 2015-03-08 21:54:17 -07:00
Scott Lahteine
0eae9c24bc Merge pull request #1582 from galexander1/deltaconftypo 
fix typo in delta example config introduced in commit 697ee2d
 2015-03-08 21:13:14 -07:00
Scott Lahteine
624f23f550 Merge pull request #1575 from Wurstnase/fix-controllerFan 
Fix controller fan
 2015-03-08 20:36:38 -07:00
maverikou
424c747fb3 Enable M401 and M402 for deltas with allen key z-probes. 2015-03-08 09:57:38 +02:00
maverikou
0d593ab7c1 Fix debug message 2015-03-08 09:41:31 +02:00
Greg Alexander
3e8c5678f5 fix bug where, i.e., "G1X1E1" would be interpretted as "G1 X10 E1", 
because strtod() will read the E address value as if it was a base 10
exponent.
 2015-03-07 21:14:34 -05:00
Greg Alexander
ed7874b4e0 M404 should not use 'N' address as parameter because 'N' is reserved for the line number 2015-03-07 17:35:06 -05:00
Greg Alexander
b9dfa5cad4 use code_value_long() instead of (int)code_value() 2015-03-07 17:33:15 -05:00
Greg Alexander
901b03d020 use strtol() instead of strtod() when an integer value is desired 2015-03-07 17:24:26 -05:00
Greg Alexander
4fba7b084f fix typo in delta example config introduced in 
commit 697ee2dc50
 2015-03-07 16:43:41 -05:00
Mehmet Sutas
cfc6a3a87a Filament Runout Sensor Feature 
With this change a mechanical or optical switch may be used to check the
availability of the filament and when the filament runs out an M600
(filament change) command is issued. This is only done while printing
with an SD card.

This feature was requested several times (issue #679), but the requests
were not accepted since it was believed that this situation should be
handled at host side. However during an SD print the control is totally
on firmware and I think that during an SD print it should be handled by
the firmware.

The original code was posted at reprap forum
(http://forums.reprap.org/read.php?1,297350) by Lazymonk. I have only
corrected some bugs of the code and improved it by adding definitions to
the configuration.h in order to make it more standardized.
 2015-03-07 22:43:15 +02:00
maverikou
e6862700af Add Z_RAISE_AFTER_PROBING to all config files 2015-03-07 20:55:30 +02:00
maverikou
39d255608d Test an extra delta configuration with auto bed leveling code paths 2015-03-07 20:53:23 +02:00
maverikou
7c24b97958 Ported over Johann Rocholl's improvements for delta printers: 
- Nonlinear auto bed leveling code (includes G29, G30, Z_RAISE_AFTER_PROBING). Cleaned it up to be a delta-specific AUTO_BED_LEVELING_GRID code path.
- Allen key z-probe deployment and retraction code. Cleaned it up and added safety checks.
 2015-03-07 20:36:21 +02:00
Wurstnase
a5342c942e Update Marlin_main.cpp 2015-03-07 16:47:53 +01:00
Scott Lahteine
0f3b7d5575 Update annotated configurations 
- Also update base configs
 2015-03-07 01:07:40 -08:00
Scott Lahteine
c5aa56bc4d Merge branch 'Development' into marlin_configurator 
Latest upstream commits
 2015-03-06 23:00:03 -08:00
Scott Lahteine
d085725c86 More sanity-checking for ABL 
- Moved sanity-checks to Marlin_main.cpp
- Applied to other configuration files
- Fixed formatting of ABL output
- Passing verbose level to probe_pt
- Miscellaneous cleanup
- Put CONFIG_STEPPERS_TOSHIBA into Configuration.h
 2015-03-06 22:14:34 -08:00
Scott Lahteine
8b6766b37b Merge branch 'Development' into marlin_configurator 
Latest upstream changes
 2015-03-06 16:32:57 -08:00
Scott Lahteine
9eed8c8cf0 Make sure a ROM is selected for ULTRA_LCD 2015-03-06 15:37:54 -08:00
AnHardt
7136268273 Added 'dogm_font_data_6x10_marlin_Kanji.h' 
This is copied from http://www.thingiverse.com/thing:664397

// Japanese Original font
// Version 0.1 by ichibey
//
// 営利目的で利用する際は、かならず許可を得てください。非営利の場合は、CCライセンスに従い使用ください。
// http://creativecommons.org/licenses/by-nc/2.1/jp/legalcode

This font is very special. It uses a mixture of katakana an kanji symbols, uses multi character symbols and is only addressable by '\xxx' sequences.
 2015-03-07 00:26:28 +01:00
AnHardt
16e173e167 Added 5 new font.h files to main directory. 
The former place of 'dogm_font_data_6x9_marlin.h' was in 'dogm_font_data_m0arlin.h'.

Deleted 'dogm_font_data_marlin.h'.
 2015-03-07 00:09:49 +01:00
Scott Lahteine
254970c92a Merge pull request #1570 from C-o-r-E/escape_fix 
Fixes gCode handling of comments and escaped characters
 2015-03-06 15:09:35 -08:00
Scott Lahteine
25dc79f124 Remove M48 credits also 2015-03-06 14:54:30 -08:00
Scott Lahteine
34e51f576f Fix compile error in gcode_G29 
- A redo of #1576, which missed topo_flag
- Always set verbose_level
 2015-03-06 14:52:05 -08:00
AnHardt
b14270b029 Added font tools 2015-03-06 23:48:55 +01:00
AnHardt
fe2bd237d5 Add font sources. 
Fonts have been created with fony.exe (http://hukka.ncn.fi/?fony)

The HD44760_? fonts simulate the fonts of the character based displays.
The ISO10646 fonts provide the right size of the standard fonts.
Marlin_symbols contains only the the special symbols of the original marlin font.
 2015-03-06 23:36:56 +01:00
Scott Lahteine
344a12bd10 Merge pull request #1571 from AnHardt/Undubble 
Undubble MSG_MIN & MSG MAX
 2015-03-06 10:08:19 -08:00
Scott Lahteine
1149c24b86 More grouping, cleanup, start on overrides 2015-03-06 08:48:53 -08:00
Wurstnase
62bd734612 fix controllerFan() for inverted enable pins 
add ```^ !(n_ENABLE_ON)``` for each stepper
 2015-03-06 12:01:17 +01:00
AnHardt
3024f6c706 Undubble MSG_MIN &MSG MAX 2015-03-06 00:25:44 +01:00
Gina Häußge
63b62d8d4e Fixed in-line comments and escaping 
* "G1 X1 ; test" was not executing "G1 X1" due to never leaving comment mode.
  * "M117 Hello \;)" printed "Hello \" to the display due to not replacing serial_char properly.

Tested with the following commands:
    * M117 Hello ; test => displays "Hello" on display, ignores "test"
    * G1 X1 ; foo => moves 1mm in X, ignores "foo"
    * ; test => completely ignored, not even acknowledged
    * M117 Hello \;) => displays "Hello ;)" on display
    * M117 Hello \\;) => displays "Hello \" on display, ignores ")"
 2015-03-05 23:30:34 +01:00
C-o-r-E
99fb1bc3e8 Attempt to resolve #1568 and add basic escape character support 2015-03-05 15:22:37 -05:00
Scott Lahteine
fad14ae7eb Merge branch 'Development' into marlin_configurator 
Latest upstream changes
 2015-03-05 05:32:31 -08:00
Scott Lahteine
cdc38aa783 Move gcode handlers into inline functions 2015-03-05 04:27:24 -08:00
Scott Lahteine
6d9e9a6bef Merge branch 'Development' into enhanced_g29 
Latest upstream changes
 2015-03-05 02:49:18 -08:00
Scott Lahteine
4db2179f5c Include 4th extruder support 2015-03-05 02:37:36 -08:00
OhmEye
f90a947e65 Fix autoretract 
Autoretract was broken, looks like it was overlooked when the retracted flag was updated for multi extruders.
 2015-03-04 20:28:08 -10:00
Scott Lahteine
2ef6b3d57a Fix wrong defines, broken syntax 2015-03-04 22:24:44 -08:00
Scott Lahteine
08b722b635 Merge pull request #1555 from C-o-r-E/solenoids 
Add support for solenoid articulated extruders
 2015-03-04 21:36:29 -08:00
Scott Lahteine
32744d41a9 Do sanity checking on LRFB values 
- Setting boundaries based on configured limits, contrasting with G28
(which forgets these limits?)
 2015-03-04 21:32:11 -08:00
chrono
0a7d85c20e Minor fixes 2015-03-04 12:35:32 +00:00
chrono
48e3a97a18 Removed extra encoder definitions from pins_FELIX2.h 2015-03-04 12:21:18 +00:00
Scott Lahteine
d052a3c6aa Merge pull request #1551 from thinkyhead/redundant_encrot 
Cleanup rotary encoder encrot* defines
 2015-03-04 03:22:24 -08:00
chrono
d8eeddfb93 Updated DUAL Extruder config, added README and enabled NEWPANEL by default 2015-03-04 09:59:58 +00:00
chrono
b423b90c77 Added Configuration_adv.h to examples for LCD/SD Support 2015-03-03 19:09:25 +01:00
domonoky
075507fb9a missed one X_ENABLE_PIN 2015-03-03 11:09:56 +01:00
Scott Lahteine
dfb38874f8 Some suggested changes for #1555 2015-03-03 00:48:20 -08:00
Scott Lahteine
7f8ea7105f Arrange ProbeAction values bitwise 2015-03-02 20:14:37 -08:00
Scott Lahteine
7684721977 Enhanced G29 
- Adapted “Enhanced G29” code referred to in #1499 and posted at
[3dprintboard.com](http://3dprintboard.com/showthread.php?3105-Auto_Bed_
Leveling-Enhanced-G29-command)
- Compatible with current G29 while adding some new arguments
  - `V` sets the verbose level for serial out
  - `T` (or `V` > 2) send a Topology report to serial out
  - `E` works the same way as before
  - `P` works as before (source used `n` or `U`/`u`)
  - `L`, `R`, `B`, `F` work as before
- Still needs sanity checking for `LRBF`
 2015-03-02 20:00:17 -08:00
C-o-r-E
874d3d3fc5 Add support for solenoid articulated extruders 2015-03-02 20:07:12 -05:00
chrono
7540a81106 Minor fixes 2015-03-02 22:55:00 +01:00
chrono
a375d648c7 Merge remote-tracking branch 'upstream/Development' into Development 2015-03-02 17:21:05 +00:00
domonoky
4a7aca2736 Merge remote-tracking branch 'remotes/upstream/Development' into Development 2015-03-02 17:52:12 +01:00
alexborro
715104e477 Fix Endstop check for CoreXY bots. 
The X_Axis could not home to min while Y_Max endstop was trigged.
 2015-03-02 13:36:58 -03:00
Scott Lahteine
e428e8da75 Merge pull request #1552 from thinkyhead/cleanup_cardreader 
Cleanup of cardreader.*
 2015-03-02 07:57:26 -08:00
Scott Lahteine
20e59dc61e Don't skip files starting with underscores 2015-03-02 07:56:11 -08:00
Scott Lahteine
f171656f8e Cleanup of cardreader.* 
- Apply standards to cardreader.*
- Fix minor issues with cardreader.cpp
- Apply standards to some other stale regions
 2015-03-02 07:06:01 -08:00
Scott Lahteine
f379edca78 Cleanup rotary encoder encrot* defines 
The encrot values are used in only one place, and don’t vary, so remove
redundant references.
 2015-03-02 06:42:48 -08:00
Scott Lahteine
c7cdb176c8 Merge branch 'Development' into marlin_configurator 
Latest upstream changes
 2015-03-02 06:13:10 -08:00
Scott Lahteine
49f471a5fc Merge pull request #1541 from thinkyhead/fixup_temperature 
Cleanup of temperature code
 2015-03-02 05:38:10 -08:00
Scott Lahteine
f2710e11d1 Optimize initial loading, code cleanup 2015-03-02 05:23:36 -08:00
chrono
558c6313f7 Merge branch 'pr-felix' into Marlix 2015-03-02 10:27:58 +00:00
chrono
08bc723a3c Enable PIDBED 2015-03-02 10:26:42 +00:00
chrono
e487bd642b Updated PR to streamline integration 2015-03-02 09:49:45 +00:00
Scott Lahteine
2eeb241b42 Find fields that group together 
- Do field grouping
- Tweak configurations for better grouping
 2015-03-02 01:45:53 -08:00
Scott Lahteine
e30bfedce4 Fix undefined *_PROBE_BED_POSITION error 2015-03-01 19:57:35 -08:00
chrono
3eafea840d Minor fixes in Configuration.h 2015-03-01 11:04:02 +01:00
chrono
c7fb1b70f2 Initial Configuration.h for Felix 2.0/3.0 2015-03-01 09:54:36 +00:00
chrono
2e172f38bd Added support for Felix 2.0/3.0 printers 2015-03-01 09:16:55 +00:00
Scott Lahteine
f994729999 Parse and use dependent groups 
- Parse #if, #ifdef, etc. for rules to enable fields
 2015-02-28 22:40:20 -08:00
maverikou
9b50ec6512 Panel One encoder pins 2015-02-28 10:52:15 +02:00
Scott Lahteine
838a22de64 Fix switch value method, make app global 2015-02-27 21:08:09 -08:00
Scott Lahteine
8d5839151b Merge branch 'Development' into marlin_configurator 
Latest upstream changes
 2015-02-27 20:40:23 -08:00
domonoky
443e7edef4 - Add support for L6470 Drivers. 
- Both TMC, L6470 and pin-driven drivers work.
- All can be mixed and matched as needed.
 2015-02-27 12:43:23 +01:00
Scott Lahteine
1db02c2891 Merge branch 'Development' into fixup_temperature 
Merge upstream changes
 2015-02-26 17:25:28 -08:00
Scott Lahteine
a99470fbb0 Merge pull request #1527 from maverikou/panel_one 
Added support for PanelOne from T3P3.
 2015-02-26 16:01:13 -08:00
domonoky
5727cb3ed4 Cleanup TMC Stepper a bit. 2015-02-26 12:57:46 +01:00
Scott Lahteine
a5bbd402bf Merge pull request #1539 from AnHardt/dummysensor 
Extend the idea of dummy temperature sensors.
 2015-02-26 01:29:14 -08:00
Scott Lahteine
1a7b0d9a37 Redo HAS_* macros to fix define error 2015-02-26 01:14:59 -08:00
Scott Lahteine
864dddc878 Macros to the top, a few HAS_* macros 2015-02-26 00:33:30 -08:00
alexborro
227ab8c665 Merge pull request #1503 from MarcelMo/patch-2 
Support for simple customisable AutoZProbing area
 2015-02-25 13:22:42 -03:00
Scott Lahteine
fd1ea9d56f Move literal strings to language files 2015-02-24 23:03:08 -08:00
maverikou
8742b6bd56 Merge branch 'Development' into panel_one 2015-02-24 22:24:57 +02:00
Scott Lahteine
aa9c1f1bed Better name for ADC macro 2015-02-24 05:38:10 -08:00
Scott Lahteine
9c9726d469 Cleanup of temperature code 
- Reduce calls to millis()
- General cleanup of manage_heaters
- General cleanup of pid autotune
- Formatting here & there
- Macros to clean up and shrink ISR code (reduced by ~364 lines)
 2015-02-24 04:46:11 -08:00
AnHardt
c6d2ebe452 Extend the idea of dummy temperature sensors. 
Added a second sensor and made them configurable.
 2015-02-24 11:02:16 +01:00
Scott Lahteine
c9a3eb0c1a Spacing in calculate_volumetric_multiplier(s) 2015-02-23 20:35:18 -08:00
Scott Lahteine
2af559cca3 Shared function for menu_edit_* and menu_edit_callback_* 2015-02-23 20:31:28 -08:00
Scott Lahteine
df8c51528f Merge branch 'Development' into cleanup_ultralcd 
Latest upstream changes
 2015-02-23 20:13:08 -08:00
Scott Lahteine
517f411999 Spacing adjustment to menu_edit* macro 2015-02-23 20:11:52 -08:00
Scott Lahteine
4938ae5caf Add required backslash for macro expansion 2015-02-23 20:10:49 -08:00
Scott Lahteine
e182cdebf9 Add required backslash for macro expansion 2015-02-23 19:54:07 -08:00
Scott Lahteine
fa4c36df68 Fix menu callback issue wrt LCD_CLICKED 2015-02-23 19:40:57 -08:00
Scott Lahteine
0cf0c20532 Optimize calculate_volumetric_multiplier 2015-02-23 18:10:35 -08:00
domonoky
38500165ea First attempt at adding TMC Driver support. May need some cleanup. 2015-02-23 17:45:29 +01:00
domonoky
b55995aae8 Introduce a layer of macro indirection to all stepper pins. This allows other stepper drivers to redefine them, so they can use SPI/I2C instead of direct pin manipulation. 2015-02-23 16:12:35 +01:00
kieranc
8ccdac9898 Enable PID debugging for heated bed 2015-02-23 09:42:01 +01:00
kieranc
29097b0ab2 Enable PID debugging for heated bed 2015-02-23 09:41:25 +01:00
kieranc
21bd4fd6db Enable PID debugging for heated bed 2015-02-23 09:40:53 +01:00
kieranc
fb56aad898 Enable PID debugging for heated bed 2015-02-23 09:40:29 +01:00
kieranc
08c543f8fb Enable PID debugging for heated bed 2015-02-23 09:40:06 +01:00
kieranc
c89413db1e Enable PID debugging for heated bed 2015-02-23 09:39:39 +01:00
kieranc
1c71e4751a Enable PID debugging for heated bed 2015-02-23 09:39:07 +01:00
maverikou
a9e15aa503 Updated example configurations 2015-02-22 20:15:05 +02:00
Scott Lahteine
3ba47ea277 Remove test/demo multi=line code menu items 2015-02-22 10:10:37 -08:00
Scott Lahteine
c1240f23dd Merge branch 'Development' into marlin_configurator 
Latest upstream changes
 2015-02-22 10:02:25 -08:00
alexborro
a57869ba49 Dummy Thermistor Table for testing purposes 
Am I the only one who always need to change the thermistortable.h to add
a dummy table??
Ok, it is done. Just set the thermistor to 999 and it will always read
25C. Great for Testing or Development purposes.
 2015-02-22 11:02:04 -03:00
Maverikou
2e166f5337 Added support for PanelOne from T3P3. 2015-02-22 09:14:43 +02:00
Scott Lahteine
40ef472a25 Merge in encoder multiplier 2015-02-21 20:18:49 -08:00
Scott Lahteine
1c13cd604b Formatting in babysteps defines 2015-02-21 18:45:10 -08:00
Scott Lahteine
3a26804d80 Adapt to latest PID code and fix typos 2015-02-21 18:41:04 -08:00
Scott Lahteine
422582da71 Prep formatting for upcoming PR 2015-02-21 18:24:16 -08:00
Scott Lahteine
27ac3e985d Add options to example_configurations 2015-02-21 18:17:37 -08:00
Scott Lahteine
0d6a7a2df0 Merge with latest upstream changes 2015-02-21 18:13:31 -08:00
Scott Lahteine
c7a97e18b7 Merge branch 'Development' into cleanup_ultralcd 
Latest upstream changes
 2015-02-21 18:04:08 -08:00
Scott Lahteine
6d5c13df74 Merge pull request #1520 from thinkyhead/fixup_temperature 
Fix typos in checkExtruderAutoFans
 2015-02-21 17:53:26 -08:00
Scott Lahteine
5b9e341222 Merge pull request #1516 from thinkyhead/fixup_ramps 
Cleanup ramps boards
 2015-02-21 17:51:57 -08:00
Scott Lahteine
57bc28b42c Cleanup and fix ultralcd.cpp 
- Fix bug in lcd_control_temperature_menu
- Remove test menu-item left in from multi-line command feature
- Replace literals with translatable strings
- Reduce lcd_preheat code redundancy
- Reduce menu macro redundancy
- Clean up formatting
 2015-02-21 17:38:56 -08:00
Scott Lahteine
4fcd4b444e Merge pull request #1519 from thinkyhead/fix_recent_issues 
Fix implementation of PID menu items
 2015-02-21 16:43:11 -08:00
Scott Lahteine
9c35ed149d Merge pull request #1508 from AnHardt/iss1492 
Fix iss#1492
 2015-02-21 16:26:37 -08:00
Scott Lahteine
430c4b6538 Replace missing backslash 2015-02-20 02:17:16 -08:00
Scott Lahteine
3aa5f98b64 Download all as ZIP, adjust layout on resize 2015-02-20 02:12:00 -08:00
Scott Lahteine
a8939eec28 Readability of MENU_MULTIPLIER_ITEM 
Last commit before bed.
 2015-02-20 02:08:41 -08:00
Scott Lahteine
09e09b308e Tweaky spacing adjustments 2015-02-20 01:22:56 -08:00
Scott Lahteine
e3fd3e8fa4 Fix typos in checkExtruderAutoFans 2015-02-20 00:08:59 -08:00
Scott Lahteine
c610471b0c Add PID_PARAMS_PER_EXTRUDER conditional 2015-02-20 00:00:19 -08:00
Scott Lahteine
2d6fa9ce80 Proper implementation of PID menu items 
- Make this work per #1344
 2015-02-19 23:54:06 -08:00
wgm4321
b8e79dce89 Fix compilation errors when encoder multiplier is disabled 2015-02-19 21:51:23 -05:00
wgm4321
65e1fc71be Add encoder rate multiplier 2015-02-19 21:42:57 -05:00
Scott Lahteine
859c8d3fef Azteeg X3 overrides too 2015-02-19 17:28:38 -08:00
Scott Lahteine
7891eacf21 Merge branch 'Development' into fixup_ramps_boards 
- Also apply cleanup for #1514
 2015-02-19 17:26:22 -08:00
Scott Lahteine
1600506545 Merge remote-tracking branch 'upstream/Development' into marlin_configurator 2015-02-19 15:15:55 -08:00
Scott Lahteine
5d0c93ae10 Keep config boxes in view on wide screen 2015-02-19 03:41:41 -08:00