SunRed/Marlin-Artillery-M600
Archived
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
12091 commits 1 branch 0 tags 118 MiB
Commit graph

3303 commits

Author SHA1 Message Date
Scott Lahteine
f1efcfed14 Fix backslash in language_test.h 2018-11-23 20:39:23 -06:00
Yücel Temel
3b186a55ac Don't show superscript ³ with NOT_EXTENDED_ISO10646_1_5X7 (#12513) 2018-11-23 20:16:51 -06:00
Scott Lahteine
82c96c971e Bring superscripts slightly lower in BDF fonts 2018-11-23 20:02:34 -06:00
Sinisa Culic
8a0992d921 Fast PWM for controller fan (#12485) 2018-11-23 16:03:39 -06:00
Ludy
e98d195901 Remove extra declarations in cardreader.cpp (#12520) 2018-11-23 15:58:20 -06:00
Scott Lahteine
fd2998efd5
Revert ADC_KEYPAD direction behavior (#12508) 2018-11-22 06:00:00 -06:00
Scott Lahteine
d29cb09b3e Fix a minor compile warning 2018-11-22 05:35:38 -06:00
Yücel Temel
5b1d52671c Use superscript 3 in language_en.h (#12504) 2018-11-22 02:27:28 -06:00
Marcio Teixeira
7109dadd21 Additional pin definitions for Archim 2 (#12500) 
- Added GPIO pins to Archim 2
- Added new 108 pin to `fastio_Due.h`
 2018-11-22 01:07:02 -06:00
Andy Shaw
4975b13b74 Fix problems with LPC1768 EEPROM flash emulation (#12503) 
* Remove duplicate calls to PrepareSector

Some flash memory API calls require that a call to `PrepareSector` is done before use. However this call is already made by the LPC1768 framework so the calls in this code are not required.

* Ensure correct alignment of RAM buffer

The LPC176X flash API requires that the RAM buffer used for write operations must be word-aligned. This change ensures that this is the case.
 2018-11-22 01:03:32 -06:00
Scott Lahteine
b738972e69 General cleanup of Re-ARM pins 2018-11-21 19:00:49 -06:00
Scott Lahteine
ee423dcdd0 Invert hotend bitmaps, by default 2018-11-21 01:02:06 -06:00
Scott Lahteine
c5642a894f
Fix ADC_KEYPAD middle button (#12493) 2018-11-20 21:39:30 -06:00
Scott Lahteine
0946cbcdca Revert some const changes (for now) 2018-11-20 08:19:48 -06:00
Scott Lahteine
4def8b3b5e Expanded options for _Statusscreen.h (#12455) 
See the PR for full details. The updated system will be documented on the website in the near future.
 2018-11-20 07:50:37 -06:00
Scott Lahteine
d51e5690f4 Don't show updir with no card present 2018-11-20 07:01:46 -06:00
Scott Lahteine
ec9d21a234 Shift YZ on graphical display to fit Z+123.45 2018-11-20 06:58:18 -06:00
Scott Lahteine
817a37169a Apply/unapply const here and there 2018-11-20 06:44:21 -06:00
Scott Lahteine
643e0066a0 Followup to #12451 2018-11-20 06:27:19 -06:00
Marcio Teixeira
4bcb63b705 Fix for #12482 (#12483) 
Fix Z-move to uninitialized position in SWITCHING_EXTRUDERS tool_change (no_move=true)
 2018-11-20 00:04:11 -06:00
Marcio Teixeira
50ee747787 Fix compilation errors. Followup to #12439 (#12481) 2018-11-20 00:02:13 -06:00
Ludy
90a58488b5 Corrected unused var, default switch, Travis tests (#12477) 2018-11-19 23:59:48 -06:00
Scott Lahteine
a4c15dc54f
Modify MBL to use IJ instead of XY (#12478) 2018-11-19 09:08:15 -06:00
Scott Lahteine
fc3f1c4572 Get u8g reference for lcdprint 2018-11-19 06:23:15 -06:00
Scott Lahteine
88c57eaf55
Clean up some u8g code (#12476) 2018-11-19 01:33:59 -06:00
Ludy
1f93d2bcf7 Fix LCD compile error, etc. (#12472) 2018-11-18 20:39:49 -06:00
Scott Lahteine
826d570162
Combine Travis CI option-setting commands (#12474) 2018-11-18 19:58:02 -06:00
Scott Lahteine
9d13f07d09 GTM32 Pro VB changes from Markku Sinisalo 2018-11-18 19:56:38 -06:00
Roman Moravčík
5fbe5cabc8 Fixed displaying of kill MSG_OUTAGE_RECOVERY string. (#12470) 2018-11-18 18:05:29 -06:00
kAdonis
4ae9a06c60 Update M303.cpp (#12471) 2018-11-18 18:04:51 -06:00
Ludy
c0b75f49b6 Fix "no effect" and "unused variable" compile warnings (#12473) 2018-11-18 17:54:00 -06:00
Nils Hasenbanck
5a4fd8e0a6 Fix access to the DWT peripheral for STM32 HAL (#12434) 
Access to the DWT peripheral for the `CYCCNT` register needs to happen before `main()`. The code needs to be called after the setup of the system clocks, so the right place is between the `premain()` and `main()` function of the STM32 Arduino core.

This patch moves the DWT access code to a new function, which is then placed between `premain()` and `main()`.
 2018-11-18 01:30:46 -06:00
Scott Lahteine
7f225b9421 Fix MAX_MESSAGE_LENGTH 2018-11-18 01:11:26 -06:00
Scott Lahteine
06674a321a Remove extra include 2018-11-18 00:34:07 -06:00
Marcio Teixeira
c1e17037e5 Various fixes for MarlinUI and ExtUI (#12439) 2018-11-17 22:21:44 -06:00
Giuliano Zaro
d3605cfc26 Don't start watching heaters when target is 0 (#12453) 2018-11-17 21:53:52 -06:00
Ludy
93e958f695 Fix compile error with ZONESTAR_LCD+NO_LCD_MENUS (#12466) 2018-11-17 21:21:30 -06:00
Ludy
22d7fed60a Fix compile error with SD_FIRMWARE_UPDATE (#12462) 2018-11-17 21:13:36 -06:00
Nils Hasenbanck
779b2709ec Change temperature pin order for RemRam V1 (#12458) 
Beta testers suggested to adopt the RAMPS order of temperature probe connectors. This commit fixes the order to the RAMPS order.
 2018-11-17 16:51:06 -06:00
Scott Lahteine
8ebb4dc294 Followup to static CardReader 2018-11-17 07:52:35 -06:00
Scott Lahteine
7ee5894360 Allow float XY probe offsets 
Responding to #12383

XY probe offsets should be integers because adding decimal points makes the code larger. But if decimals are very much wanted, this commit removes the old restriction.
 2018-11-17 07:44:47 -06:00
Giuliano Zaro
43ecdb606f Fix a compile warning (#12452) 2018-11-17 07:08:25 -06:00
Ph0non
984c4ba8c7 Enable SD Card on RepRap Display and RADDS (#12446) 
* Enable SD Card on RepRap Display and RADDS

Define the necessary pins in `pins_RADDS.h` (copied from the `RADDS_DISPLAY` section) for the use of the SD card slot on RRD.
 2018-11-17 06:59:40 -06:00
Ludy
56a94c2a26 Use 'target_extruder' in M104 as with M109 (#12448) 2018-11-17 06:55:25 -06:00
Scott Lahteine
66580f32c2
Make CardReader class static (#12451) 
* Make CardReader a static class
* Make CardReader flags into bitfields
 2018-11-16 22:39:16 -06:00
Scott Lahteine
3e9ffaddb6
Consolidate, optimize some LCD menu code (#12450) 2018-11-16 21:44:48 -06:00
Scott Lahteine
d97e31db4c
Optimize Power-Loss Recovery (#12440) 2018-11-16 20:47:07 -06:00
Mateusz Krawczuk
ca21ac6b9b Support two MAX6675 thermocouples (#8686) 2018-11-16 18:20:33 -06:00
Scott Lahteine
0e610815e4 No need for Cap:PAREN_COMMENTS 2018-11-16 04:28:40 -06:00
Scott Lahteine
7a075a5dc9 Tweak extruder errors 2018-11-16 01:32:21 -06:00
Scott Lahteine
2d92f333f5 Fix GcodeSuite::T active_extruder reference 2018-11-15 14:07:24 -06:00
Scott Lahteine
d2bb53702a
Optimize target_extruder, ignore T with mixing (#12432) 
* Optimize target_extruder, ignore T with mixing
* Give G-code Tn parity with tool_change
 2018-11-14 17:33:04 -06:00
Marcio Teixeira
5e586a6b39 Fix to runout sensor code. (#12431) 
- "old_state" is no longer a class static variable.
 2018-11-14 16:54:05 -06:00
Scott Lahteine
d82c350de7
Miscellaneous LCD code renaming, reordering (#12430) 
* Move special characters to language.h
* Apply some naming standards
* Clean up menu item draw functions
* Rename some Temperature methods
* UI => ExtUI
 2018-11-14 13:13:51 -06:00
Scott Lahteine
edfd106bc5
Rejigger Filament Runout class (#12428) 2018-11-14 11:45:57 -06:00
Scott Lahteine
f4c128ecaa
Move RRW keypad code to a common method (#12429) 2018-11-14 06:00:21 -06:00
Scott Lahteine
54ec5528a0 hasstatus => has_status 2018-11-14 01:34:28 -06:00
Scott Lahteine
ebf585b673 Fix an old sanity check 2018-11-14 01:15:35 -06:00
Ryan
052d102ded UltiMachine Archim 1 support (#12404) 2018-11-14 00:27:39 -06:00
Scott Lahteine
664e20754d Clean up pins files 2018-11-14 00:23:33 -06:00
Scott Lahteine
1eb5249598 Fix Formbot Trex-2+ configs 
Followup to #12422
 2018-11-13 21:53:54 -06:00
thiagodesacosta
075a22ed65 Update Portuguese-Brazilian translation (#12402) 2018-11-13 19:42:25 -06:00
Marcio Teixeira
3ceab8474c Add required "cardreader.h" include (#12419) 2018-11-13 17:12:44 -06:00
Giuliano Zaro
98c2fc4e42 Endstops fix followup (#12423) 
Followup to #12413
 2018-11-13 17:10:07 -06:00
Roxy-3D
f19fd642ce
Updates to Formbot T-Rex 2+ configuration files (#12422) 
Updates to Formbot T-Rex 2+ configuration files
 2018-11-13 13:48:35 -06:00
Roxy-3D
cda5ef08fa
Debug of G2-G3 for UBL (#12386) 
Changes only affect UBL.  Everything else is left alone.
 2018-11-13 11:20:21 -06:00
AnHardt
9ad3aed0ef Fix tool-change for MIXING_EXTRUDER with < 2 virtual tools (#12417) 
Fix #12416

Better handling of `ENABLED(MIXING_EXTRUDER) && !MIXING_VIRTUAL_TOOLS > 1` -  to not fall through to the general case. Fix compiler warnings for `#elif EXTRUDERS < 2`.
 2018-11-13 04:56:10 -06:00
Giuliano Zaro
d631267548 Refine endstops fixes (#12413) 
When endstops/probe are enabled `ENDSTOP_NOISE_THRESHOLD` calls to `update` are required to properly re-sync endstops/probe status.
 2018-11-13 04:31:58 -06:00
Scott Lahteine
0ee1a92971
Group status methods, share reset_status with Extensible UI (#12414) 
* Group status methods, share reset_status with Extensible UI
* Move common DOGM code to headers
 2018-11-13 01:47:45 -06:00
Scott Lahteine
690c4e8457 Clean TLM trailing whitespace 2018-11-13 00:03:34 -06:00
Scott Lahteine
143b2896e0
Add M412 to enable/disable filament runout detection (#12406) 2018-11-12 21:29:46 -06:00
Scott Lahteine
a163c89c6a Followup to 50af1d1 2018-11-12 20:31:53 -06:00
AnHardt
be6271767f Fix BABYSTEP_ZPROBE_OFFSET (#12408) 
Fix #12399

Did not compile without  `WATCH_HOTENDS || WATCH_THE_BED`.
Add condition to include "../../module/temperature.h".
 2018-11-12 17:44:21 -06:00
Scott Lahteine
50af1d1e08 Differentiate translated On/Off from Serial ON/OFF 2018-11-12 17:23:08 -06:00
Scott Lahteine
df907a905f Update UBL comments for debug change 2018-11-12 03:46:48 -06:00
Scott Lahteine
da17f8ad37 For now (!) don't synchronize in M204 and M205 
See if this has any deleterious effect on motion planning by slicers that inser their own jerk and acceleration controls. The problem I see is that these settings can take effect on blocks already in the planner, and the only way around this would be to shadow these settings in planner blocks and use the shadowed settings in the planner.
 2018-11-12 02:43:24 -06:00
Scott Lahteine
a3923424c7 Clean up LCD width/height determination 2018-11-12 02:37:40 -06:00
Scott Lahteine
a0c795b097
Encapsulate common display code in a singleton (#12395) 
* Encapsulate common LCD code in a singleton
* Depend more UBL code on UBL_DEVEL_DEBUGGING
  - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
 2018-11-11 12:16:24 -06:00
Scott Lahteine
9da6809ac3 Adjust some comment spacing 2018-11-11 11:28:50 -06:00
Scott Lahteine
471f403a67 Reduce code size with plain inlines 2018-11-11 08:36:10 -06:00
Scott Lahteine
30a49f5ee2 Apply extra condition to LCD_PROGRESS_BAR 2018-11-11 08:36:10 -06:00
Scott Lahteine
4e0c935959 Update HAL and libs formatting 2018-11-10 19:43:23 -06:00
Scott Lahteine
47483e8c17 Update Raptor config 2018-11-10 19:42:46 -06:00
Scott Lahteine
6093df11dc
Allow G26 to use the active extruder (#12387) 
* Make lcd_quick_feedback argument optional
* Add click_to_cancel option to wait_for_hotend/bed
* Have G26 use the active nozzle and wait_for_hotend/bed
* Use wait_for_release in UBL G29
* Add 'T' parameter to G26 for an initial tool-change
 2018-11-10 18:07:38 -06:00
articide
4260282df7 Tevo Little Monster example configuration (#12370) 2018-11-10 03:36:01 -06:00
Scott Lahteine
bed15fcd81 Tweak 'echo_not_entered' used by MBL's G29 2018-11-10 01:32:51 -06:00
Scott Lahteine
c239131ff5 Use 'serial_spaces' in 'print_2d_array' 2018-11-10 01:32:51 -06:00
Scott Lahteine
56150ec030 Add reference comments to MeshLevelingState 2018-11-09 21:31:20 -06:00
Ludy
24c5e57bb6 Update German language (#12379) 2018-11-09 15:25:29 -06:00
Giuliano Zaro
fd7fd55662 Solve endstops issues (#12382) 
- Partially reverts #11900 and tries to solve #12336
 2018-11-09 14:58:04 -06:00
Scott Lahteine
78ccedd6a8 Fix M91x sanity-check to permit TMC2660 
Fix #12362
 2018-11-09 05:48:15 -06:00
revilor
b60abc7c37 [2.0.x] Macro G-codes (#9365) 2018-11-09 05:25:08 -06:00
Giuliano Zaro
ccdbf20f60 Update Italian language (#12368) 2018-11-09 04:04:02 -06:00
Roman Moravčík
d08847b1a6 Update Slovak translation (#12376) 2018-11-09 04:03:07 -06:00
InsanityAutomation
7665dff58b No error on T0 with single-extruder and fix MIXING_EXTRUDER virtual tools (#12375) 2018-11-09 00:15:07 -06:00
Scott Lahteine
4ed6397e5d
More comprehensive NO_LCD_MENUS (#12367) 2018-11-09 00:07:16 -06:00
Scott Lahteine
9c8f083d6c Extend pins errors to include the processor 2018-11-08 22:25:59 -06:00
Scott Lahteine
525ea554a1 Remove obsolete comments 2018-11-08 10:55:18 -06:00
Scott Lahteine
ef724edd80 Apply HAS_LCD_MENU in EEPROM code 2018-11-08 10:03:05 -06:00
Scott Lahteine
b169320a03 Clean trailing whitespace 2018-11-07 02:40:18 -06:00
Scott Lahteine
81b1e9d272 Fix up xdiff, ydiff, zdiff in tool change 
Followup to #12137
 2018-11-06 22:56:33 -06:00
InsanityAutomation
6471a75a22 Combine more tool-change variables (#12137) 2018-11-06 22:22:20 -06:00
Scott Lahteine
147e270208 Restore GTM32_PRO_VB temp and heater pins 
Undo #12345
 2018-11-06 21:41:30 -06:00
Scott Lahteine
8def25e475 Set CUSTOM_MACHINE_NAME for some configs 2018-11-06 21:41:30 -06:00
Scott Lahteine
812f6a7dd7 Fix Resume from SD Pause 
In reference to https://github.com/MarlinFirmware/Marlin/pull/12098#issuecomment-436231690
 2018-11-06 21:09:37 -06:00
Scott Lahteine
4f72e041f2 Use card.stopSDPrint() for completeness 2018-11-06 20:55:17 -06:00
Scott Lahteine
488a17b3f5 Use IS_SD_PRINTING() more 2018-11-06 20:55:17 -06:00
Marcio Teixeira
4dbaa6369f Fix const pointer assignment compile error (#12350) 2018-11-06 19:49:39 -06:00
Giuliano Zaro
959ed32636 Update Italian language (#12352) 2018-11-06 19:30:24 -06:00
Roman Moravčík
812bfec65e Update Slovak translation (#12354) 2018-11-06 19:29:28 -06:00
Ludy
1624722566 Update German translation (#12355) 2018-11-06 19:28:40 -06:00
Scott Lahteine
e574f01568
More advanced pause tweaks (#12356) 
* Followup to LCD_TIMEOUT_TO_STATUS=0
* Make continuous purge screen fit 20x4
* Unify purge message modes
* Preserve last-set pause header mode
 2018-11-06 19:25:57 -06:00
Scott Lahteine
5a470d4a49 Apply some tool-change cleanup 2018-11-06 18:20:01 -06:00
Roman Moravčík
34ea458667 Fixed advanced pause messages (#12353) 2018-11-06 15:27:19 -06:00
Scott Lahteine
4c5ca89d8c
Show the appropriate pause message (#12348) 2018-11-06 04:13:48 -06:00
Marcio Teixeira
8517d5f915 LCD menu code refactoring and cleanup (#12308) 2018-11-05 22:51:10 -06:00
Scott Lahteine
b3b4e6dc45
Change Marlin debug flag names to fix conflicts (#12340) 
In reference to #11000
 2018-11-05 22:48:28 -06:00
Giuliano Zaro
f7e682eeee Update Italian language (#12344) 2018-11-05 22:46:59 -06:00
Phr3d13
a813900fce Add Geeetech Rostock 301 config, update GTM32 Pro VB pins (#12345) 2018-11-05 22:42:06 -06:00
Scott Lahteine
04f173790f Remove trailing whitespace 2018-11-05 22:38:20 -06:00
Scott Lahteine
c536ee1122 Clean up bq Zum Mega 3D pins 2018-11-05 22:38:20 -06:00
Scott Lahteine
c31e1735dd Restore LPC1768_PIN_INTERRUPT_M, apply to Z3 
- In reference to #12166
 2018-11-05 06:28:49 -06:00
Scott Lahteine
93d5b945dd Hide mesh editing until a valid mesh exists 2018-11-05 05:13:34 -06:00
Ludy
f34f09c821 Update German language (#12336) 2018-11-05 04:33:31 -06:00
Roman Moravčík
eefd7676a3 Updated slovak translation (#12338) 2018-11-05 04:31:12 -06:00
Scott Lahteine
486f2a66a9 Fix MBL XY parameter error messages 
Fix #11522
 2018-11-05 04:17:37 -06:00
Scott Lahteine
2613ddf61c Fix "circle" 2018-11-05 04:17:37 -06:00
Scott Lahteine
b779b42ffd Prevent current step-down going negative 
Addressing #11348
 2018-11-05 04:17:37 -06:00
Scott Lahteine
427bc64ba1 G28 O respects HOME_AFTER_DEACTIVATE 
Addressing #11271
 2018-11-05 04:17:37 -06:00
Scott Lahteine
3866aeac52 Clean up ENCODER_RATE_MULTIPLIER config 2018-11-05 04:17:37 -06:00
Scott Lahteine
498dfa291e Update and fix CHDK 2018-11-05 04:17:37 -06:00
Scott Lahteine
fed84f2961 Use multiplier edit item for mesh point editing 2018-11-05 04:17:37 -06:00
Scott Lahteine
d5ab4cd22a Provide a default for Z_PROBE_LOW_POINT 2018-11-05 04:17:37 -06:00
Scott Lahteine
3cbc3ecdd7 Fix 'M43 T' to use 'L' as last pin 
- The documentation is correct. The code was wrong.
 2018-11-05 04:17:37 -06:00
Scott Lahteine
1769249876 Recommend keeping endstops off 2018-11-05 04:17:37 -06:00
Scott Lahteine
5182eaf661 Fix endstops enable behavior during probing 
Fix a bug introduced in #9582
 2018-11-05 04:17:37 -06:00
Scott Lahteine
07a0822ebe M420 support in MARLIN_DEV_MODE 2018-11-04 20:54:38 -06:00
Scott Lahteine
63be48ada6 Add MESH_EDIT_MENU to example configs 2018-11-04 19:07:47 -06:00
KangDroid
82ff7c6542 Add a mesh edit menu for MBL / ABL-Bilinear 2018-11-04 19:07:47 -06:00
Scott Lahteine
44fa7fb18c Cleanups for leveling-related code 2018-11-04 19:07:47 -06:00
Scott Lahteine
cc2bc67440 ENABLED(NEWPANEL) => HAS_LCD_MENU 2018-11-04 19:06:10 -06:00
Scott Lahteine
fc84878cba MSG_UBL_EDIT_MESH_MENU => MSG_EDIT_MESH 2018-11-04 19:06:10 -06:00
Scott Lahteine
cd066bfeba Extend error messages for E factors sanity-checks 2018-11-04 18:42:56 -06:00
Ludy
c10edb0998 Update, correct sanity-checks for up to 6 extruders (#12333) 2018-11-04 18:36:45 -06:00
Scott Lahteine
0c85869c26 Clean up file endings 2018-11-04 18:30:10 -06:00
Scott Lahteine
b99f0776d6 Clean up some U8G files 2018-11-04 18:30:10 -06:00
Scott Lahteine
8014e1cc9d Allow disable of LCD_TIMEOUT_TO_STATUS (when 0) 2018-11-04 18:30:10 -06:00
Giuliano Zaro
bd05816fd8 Update Italian language (#12327) 2018-11-04 16:43:02 -06:00
Scott Lahteine
3c21483c88 Provide DOGLCD SPI pins for MKS SBASE + VIKI 2018-11-04 16:20:22 -06:00
Scott Lahteine
e0956bb572 Drop 'register' storage specifier 2018-11-04 16:17:13 -06:00
Scott Lahteine
c04cf127f7 Fix EEPROM servo angles init, section grouping 2018-11-04 16:14:54 -06:00
Scott Lahteine
9c0e05552e Suppress some compile warnings 2018-11-04 15:25:31 -06:00
Karl Andersson
176654791e Use board-specific or platform SPI pins in HAL_STM32 (#12323) 2018-11-04 15:03:45 -06:00
Scott Lahteine
60dbd8161c Fix VMAX editing 
Fix #12326
 2018-11-04 07:06:14 -06:00
Scott Lahteine
b7ca93ba37 Remove dead comment 2018-11-04 06:10:35 -06:00
Scott Lahteine
608be966d7 Add servos to pins_FYSTEC_F6_13.h 2018-11-04 06:10:35 -06:00
Hannes Brandstätter-Müller
67b22760d9 Return to status to show manual deploy/stow messages (#12324) 2018-11-04 04:51:26 -06:00
tharts
f5e8e8b53d Fix broken LPC176x build (#12317) 
* Fix broken LPC176x build
* Add UBL+HD44780 test for LPC1768
 2018-11-04 04:25:03 -06:00
Scott Lahteine
f5eab912ed
Apply #pragma once, misc cleanup (#12322) 
* Apply #pragma once in headers
* Adjust some thermistors formatting
* Misc cleanup and formatting
 2018-11-04 02:25:55 -06:00
Scott Lahteine
8696f882a9
Merge pull request #12313 from thinkyhead/bf2_scara_home_offset 
Revive SCARA home offset (not fully implemented)
 2018-11-03 07:05:24 -05:00
Scott Lahteine
56d2dcb184 Use first_page flag in place of page.page == 0 2018-11-03 06:59:21 -05:00
Scott Lahteine
d1ff22b983 Revive SCARA's home offset (unimplemented) 2018-11-03 06:24:41 -05:00
Scott Lahteine
2c9586be0c Clear up HAS_WORKSPACE_OFFSET meaning 2018-11-03 04:06:37 -05:00
Scott Lahteine
6e3caf23b6 IS_DELTA => ENABLED(DELTA) 2018-11-03 03:57:11 -05:00
Scott Lahteine
19f49db96f Tweak / reduce menu items 2018-11-03 01:18:59 -05:00
Scott Lahteine
e4cf175163
Synchronize on M204, M205 (#12302) 
* Add parser.seen for multiple parameters
* Fix M666, use !seen for report
* Synchronize on M204, M205
 2018-11-03 01:16:37 -05:00
Ludy
5ba6607181 Fix keypad-related compile error (#12306) 2018-11-02 22:29:32 -05:00
Scott Lahteine
2fb2e286ee Followup to #12256 2018-11-02 01:32:24 -05:00
Scott Lahteine
3eb9838dca Simplify TMC sanity-checks 2018-11-02 01:15:49 -05:00
Scott Lahteine
f5b31e218d Followup to #12082 2018-11-02 01:15:27 -05:00
Scott Lahteine
31c28d0dd2
Drop pgm_read_*_near and let headers choose (#12301) 
- Drop `pgm_read_*_near` and let headers choose.
- Define `USE_EXECUTE_COMMANDS_IMMEDIATE` as a conditional.
- Add `process_subcommands_now` for SRAM-based commands.
 2018-11-02 00:42:16 -05:00
Scott Lahteine
fce150f094 inline static => static inline 2018-11-01 23:15:17 -05:00
Giuliano Zaro
323c088356 Restore LED light color after pid tuning (#12082) 2018-11-01 22:04:19 -05:00
Ludy
9f77df2590 Followup to menu refactor. TMC warnings, sanity. (#12288) 
- Followup fixes for menu refactor
- Fix TMC sanity checks, unused var warnings
 2018-11-01 16:13:33 -05:00
Nils Hasenbanck
cafabf2055 Implement DELAY_NS with CYCCNT on Cortex-M7 (#12283) 2018-11-01 16:11:51 -05:00
Scott Lahteine
f5498168ae Ensure PENDING/ELAPSED use a 32-bit integer 2018-11-01 16:08:23 -05:00
MasterPIC
6e041b9c61 Use blink to show more info on LCD (#12256) 2018-11-01 15:56:12 -05:00
Scott Lahteine
eb5600acd2 Add parentheses to LCD_CLICKED 2018-11-01 15:06:14 -05:00
Scott Lahteine
42f8b6c530
Make M125 work with SDSUPPORT (#12289) 2018-11-01 15:03:45 -05:00
Scott Lahteine
f319087372 Followup to #12293 2018-11-01 14:41:03 -05:00
AnHardt
74bbb13008 Fix Mixer calculations for 32-bit processors (#12293) 2018-11-01 14:38:45 -05:00
Scott Lahteine
549d11225a Add to description of Z_STEPPER_AUTO_ALIGN 
In response to #12272
 2018-10-31 18:07:20 -05:00
Scott Lahteine
2cff0d1f39 Move menu_level_bed_corners to its own file 2018-10-31 17:44:42 -05:00
Scott Lahteine
44f2a82a56 Move axis_homed, axis_known_position to motion.* 2018-10-31 17:44:42 -05:00
Scott Lahteine
946cf8b453 EEPROM read code grouping 2018-10-31 16:43:46 -05:00
Ludy
f2adb4b9cc Update German language (#12280) 2018-10-31 16:40:41 -05:00
Karl Andersson
484ca68228 Fix misplaced parentheses (#12284) 2018-10-31 15:34:37 -05:00
Scott Lahteine
1d366db764 Tweaks to CR-10S configuration 2018-10-30 23:36:32 -05:00
Scott Lahteine
b5d7f69b51 Followup to #12249 2018-10-30 22:51:45 -05:00
N95JPL
b780b69c62 Use font ascent and descent for line positioning (#12224) 2018-10-30 22:39:44 -05:00
Scott Lahteine
9cd3529108 Organize language data, fix Korean and Danish 2018-10-30 20:41:16 -05:00
Chris Pepper
66d44c72c3 Add fast binary file transfer to SD card option (#12249) 2018-10-30 19:44:12 -05:00
Marcio Teixeira
72d8adfd1e Cleanup and refactor EXTENSIBLE_UI (#12227) 
- Add `axis_t`, `extruder_t`, `heater_t`, and `fan_t` to eliminate ambiguity, improve type safety.
- Regularized getter/setter argument order and naming.
- `setAxisPosition` no longer stacks moves in the buffer, allowing it to be called repeatedly on each touch ui tap.
- Implement better manual moves for `EXTENSIBLE_UI` (#12205)
- Calling `setAxisPosition_mm` no longer buffers the entire move to the new position, but instead causes small moves towards it to be made during the idle loop. This allows the user to adjust the destination even after the move has started and makes the UI feel much more responsive.
- As suggested by @ejtagle, the new code keeps the planner buffer full to ensure smooth motion without stops and starts.
- Change `En`, `Hn` and `FANn` to zero-based indices.
- Labels consistent with the rest of Marlin code.
 2018-10-30 19:42:26 -05:00
Karl Andersson
1946f729fd STM32 FastIO using register access (#12276) 2018-10-30 19:25:44 -05:00
Scott Lahteine
56057bcecd Fix lcd_impl_status_screen_1 2018-10-30 19:24:16 -05:00
Scott Lahteine
4ed579cafc Americanized English spelling 2018-10-30 18:55:38 -05:00
Scott Lahteine
9e663a624b Apply #pragma once to configuration files 2018-10-30 18:35:12 -05:00
Scott Lahteine
98c32d8df1 Fix a config endif label 2018-10-30 18:28:16 -05:00
Scott Lahteine
3583e2b449
Followup to Menu Refactor (#12275) 2018-10-30 16:34:45 -05:00
TheLongAndOnly
5536228359 G34 Auto-align multi-stepper Z axis (#11302) 2018-10-29 14:01:36 -05:00
Scott Lahteine
f9b80e7217 Make getfilename_sorted standard for listings 2018-10-29 13:54:21 -05:00
Scott Lahteine
5ead026967 Fix menu_temp_xx_filament_change menu items 2018-10-28 20:43:33 -05:00
Scott Lahteine
d632e44c8c
[Merge] Refactor LCD menus / screens (#12199) 2018-10-28 18:18:22 -05:00
Ludy
1f9806875c Update German language (#12261) 2018-10-28 18:11:55 -05:00
mholeys
63ce8baa55 Fix Teensy 3.5/3.6 ADC access for ADC1 (#12258) 2018-10-28 15:51:49 -05:00
Scott Lahteine
3a935fd72b Reduce repetition in menu edit items 2018-10-28 15:46:45 -05:00
Scott Lahteine
b063b1b722 Reorganize includes and declarations 2018-10-28 15:46:45 -05:00
Scott Lahteine
43cf913048 Move SD Card Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
0161d3f733 Move Custom User Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
3b0d2330b6 Move Delta Calibrate Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
6896847210 Move LED Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
9cd5471202 Move Job Recovery Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
9f11e0284c Move Filament Change Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
d87ab3ed20 Move Advanced Settings Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
587a64d80c Move Bed Leveling Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
96f313fb41 Move Info Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
423ab029b2 Move Temperature Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
489017995e Move UBL Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
a489c9fa52 Move Motion Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
3a9ad9f2b1 Move Configuration Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
143d4ec043 Move Tune Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
829effc1fe Move Main Menu to its own file 2018-10-28 15:46:45 -05:00
Scott Lahteine
37ff663b02 Convert LIGHTWEIGHT_UI to CPP 2018-10-28 15:46:45 -05:00
Scott Lahteine
a964f098b3 Make dogm status screen a CPP 2018-10-28 15:46:45 -05:00
Scott Lahteine
8055ed24ff Move font data to a subfolder 2018-10-28 15:46:45 -05:00
Scott Lahteine
774a6e8199 Drop TALL_FONT_CORRECTION 2018-10-28 15:46:45 -05:00
Scott Lahteine
c825c419d4 Convert DOGM / HD44780 impl to CPP files 2018-10-28 15:46:45 -05:00
Scott Lahteine
182b1405d9 LCD conditionals in configurations 2018-10-28 15:46:45 -05:00
Scott Lahteine
2bf18950ab Refactor LCD menus 2018-10-28 15:46:45 -05:00
Scott Lahteine
ac5f2762b7 Use E_AXIS_N where possible 2018-10-28 15:46:45 -05:00
MasterPIC
6fbc87301f 'G29 H' to set a centered square probe area (linear, bilinear) (#12242) 2018-10-27 20:30:21 -05:00
Karl Andersson
c1e8bd6add Remove STM32 board-specific delays (#12243) 
...and replace with delays for all HAL_STM32 boards.
 2018-10-27 17:26:12 -05:00
Scott Lahteine
3c9daf322a MSG_CNG_SDCARD => MSG_CHANGE_SDCARD 2018-10-27 13:56:29 -05:00
Scott Lahteine
4b7a0a5b39 Require TMCStepper 0.2.2 or newer 
In reference to #12175
 2018-10-27 11:15:28 -05:00
Scott Lahteine
ab8425f1b5
Clean up PROBE_TRIGGERED_WHEN_STOWED_TEST (#12232) 2018-10-26 19:18:20 -05:00
Chris Rigter
3028a620af Add RACK_AND_PINION_PROBE (#12218) 2018-10-26 18:24:24 -05:00
InsanityAutomation
ad60f0691c Add Creality3D RAMPS pins definitions (#12229) 2018-10-26 16:09:04 -05:00
Scott Lahteine
5580773191
Use FastIO, sanity-check LPC SD options, apply formatting (#12231) 2018-10-26 15:23:02 -05:00
Scott Lahteine
d015f746cc
Fix some compile warnings (#12220) 2018-10-26 03:53:06 -05:00
Scott Lahteine
dacb5324e8 Fix display of Y on Graphical LCD 2018-10-26 01:43:47 -05:00
Scott Lahteine
bf9dd4f4cf
Add helpers for custom text in menu items (#12214) 
For some features it can be useful to write custom text in a menu item. This commit provides helpers to make this easier.
 2018-10-25 15:17:53 -05:00
Scott Lahteine
e8031b1152 Add Custom Microstepping options 2018-10-25 11:26:32 -05:00
Scott Lahteine
fbfb48cce0 Indent a block 2018-10-25 10:52:27 -05:00
Marcio Teixeira
1a00d1bdaf Add pullup to USB interrupt line 
- A pullup on the INT pin is required when the pin is level-active
 2018-10-25 10:42:08 -05:00
TheSFReader
a07ac6312f G0 feedrate may be fixed or variable (#12172) 2018-10-25 10:35:16 -05:00
Scott Lahteine
53c535a0c1 Remove trailing whitespace 2018-10-25 09:46:33 -05:00
Roman Moravčík
55dec02ca1 Allow X, Y, Z manual move when cold. (#12209) 2018-10-25 09:13:52 -05:00
Luc Van Daele
7243101135 z_offset fix for deltas (#12210) 2018-10-25 09:11:26 -05:00
Scott Lahteine
9613f00877 Fix getProgress_seconds_elapsed to return seconds 2018-10-24 18:05:15 -05:00
gjdodd
5d487ef40e Fix null exception due to duration_t of zero (#12207) 2018-10-24 17:59:33 -05:00
Giuliano Zaro
a9061714f2 Update Italian language (#12196) 2018-10-24 16:40:48 -05:00
InsanityAutomation
aebbb2359d Fix IDEX homing X0 wrong direction (#12200) 2018-10-24 16:40:06 -05:00
gjdodd
0a549fd1f2 Fix EXTENSIBLE_UI compile errors (#12206) 2018-10-24 16:36:11 -05:00
Roman Moravčík
a80ba8fc6e Slovak translation update (#12202) 2018-10-24 16:02:38 -05:00
Roman Moravčík
e48cbff10d Fixed redefinition warnings of MSG_HOTEND_TOO_COLD. (#12203) 2018-10-24 15:00:07 -05:00
Scott Lahteine
7a04eb3a8b Fix some comment formatting 2018-10-23 22:35:44 -05:00
Scott Lahteine
2f873a119f Revert some UBL strings 2018-10-23 15:39:59 -05:00
Ludy
a93e9e6e9b Use preheat labels in place of PLA/ABS (#12194) 2018-10-23 15:38:17 -05:00
Karl Andersson
aa72884a6e Enable use of SERIAL_PORT_2 on HAL_STM32 (#12197) 2018-10-23 15:24:58 -05:00
Scott Lahteine
46360f18b4 Bring thermistor_75.h up to speed 2018-10-23 14:52:16 -05:00
Scott Lahteine
e229b831fa Customizable preheat labels 2018-10-23 00:57:50 -05:00
Scott Lahteine
a553ab82e0 Add e index to _lcd_move_distance_menu 2018-10-22 23:35:04 -05:00
Scott Lahteine
3a46212dd8
Better cold extrusion prevention in LCD menu (#12189) 2018-10-22 20:54:38 -05:00
Marcio Teixeira
fc31da1114 Implement custom delay/millis for EXTENSIBLE_UI (#12188) 2018-10-22 19:37:48 -05:00
forkoz
3a3ab3391f Return set_directions() to stepper.cpp (#12182) 
Initial manual Z move can be negative if your stepper is inverted. Leads to bad situations for crashed or initially booted printers.
 2018-10-22 19:30:51 -05:00
Scott Lahteine
e5ae7a07d1 Suppress compiler warning 2018-10-21 13:44:27 -05:00
Hannes Brandstätter-Müller
6ee2af5e2d Simplify pins_TRIGORILLA_14.h (#12162) 2018-10-21 03:23:20 -05:00
Roman Moravčík
d801f85963 Correct EEPROM read/write disparities. (#12169) 2018-10-21 02:56:31 -05:00
Scott Lahteine
8d3a92fc4a Followup to millis_t patch 2018-10-20 23:23:58 -05:00
Ludy
44369d536a Use millis_t where needed (#12152) 2018-10-20 23:21:27 -05:00
Scott Lahteine
b641571098 Replace types.h with millis_t.h 2018-10-20 23:07:12 -05:00
Scott Lahteine
eeef4e630a Fix compile error in leds.h 2018-10-20 23:07:12 -05:00
Scott Lahteine
9969c06cb5 Fix compiler warning 2018-10-20 17:16:59 -05:00
Farkas Péter
427c80119a Hide some menu items when busy: fix typo (#12164) 2018-10-20 15:55:31 -05:00
InsanityAutomation
55ac2f4c23 Fix filament runout for idex duplication modes (#12168) 2018-10-20 13:39:33 -05:00
Karl Andersson
b640b3b0d6 Define ST7920 delays for board ARMED (#12161) 2018-10-20 13:12:54 -05:00
Marcio Teixeira
2e5e689a7f Fix kill() and ExtensibleUI (#12160) 
* Fix to isPrintingFromMedia()

  - isPrintingFromMedia() will now return true even if SD print is paused.
  - isPrintingFromMediaPaused() allows UI to determine if the print is paused.

* Don't use _delay_us in minkill (#12145)

  - In HAL_DUE, _delay_us is simply an alias for delay, which causes the board to hang and subsequently reboot due to the watchdog timer.

* Shorten code with IFSD macro
 2018-10-20 01:44:46 -05:00
Scott Lahteine
b381cad399 Clean up trailing whitespace 2018-10-19 15:27:17 -05:00
Scott Lahteine
9090065e9f Move EXTRA_FAN_SPEED above FWRETRACT 2018-10-19 15:15:00 -05:00
Karl Andersson
4eb798dbdc Add support for Arm'ed (STM32F4) board (#12147) 2018-10-19 14:50:52 -05:00
TheSFReader
1fb9b299d4 Add M524 to abort SD printing (#12155) 2018-10-19 14:25:07 -05:00
Scott Lahteine
d26d9d5b81 Tweak IS_SD_INSERTED 2018-10-19 14:00:36 -05:00
Scott Lahteine
c6a5c74208 Add parentheses to SD macros 2018-10-19 13:52:57 -05:00
Giuliano Zaro
aa9202260d Fix endstop when no interrupt (#12158) 2018-10-19 13:45:39 -05:00
Scott Lahteine
8c02dd971b Move disable_all_steppers to minkill 2018-10-19 13:42:04 -05:00
Scott Lahteine
3847c08f7e Disable heaters/steppers before message 2018-10-19 13:30:46 -05:00
Marcio Teixeira
71e19baf69 Fix kill => disable_all_heaters => print_job_timer.stop (#12146) 
- Remove `print_job_timer.stop()` from `disable_all_heaters`
- Call `print_job_timer.stop()` for relevant `disable_all_heaters()`.
- Split up `kill()` for watchdog interrupt safety
 2018-10-18 21:20:56 -05:00
Ludy
4cc1c2627e Update German language (#12143) 2018-10-18 19:17:37 -05:00
Ludy
75a0d46edf Fix compile warning re: LCD_INFO_SCREEN_STYLE 2018-10-18 19:16:24 -05:00
Scott Lahteine
a81763c237 Pins E sanity check tweak 2018-10-18 18:48:23 -05:00
Giuliano Zaro
bc22641002 [2.0.x] Updated Italian Language (#12148) 2018-10-18 18:08:39 -05:00
Michael Triffon
eded90bf87 Updated Azteeg X5 Mini Wifi pins for onboard SD (#12133) 2018-10-18 11:52:55 -05:00
nhchiu
27a84fd021 Remove unused option in Anycubic Kossel config (#12138) 2018-10-18 11:47:59 -05:00
Scott Lahteine
67a3c5a16a
Alternative info screen (Prusa-style) (#12132) 
* Fix Z value display
* Add HAS_PRINT_PROGRESS
* Alternative Info Screen option
* Add LCD_INFO_SCREEN_STYLE to example configs
 2018-10-18 11:34:52 -05:00
Marcio Teixeira
5b7dd553d3 Fix sd_mmc_spi_mem capacity; clean up USB code (#12134) 
- Fix an error in the return value of `sd_mmc_spi_read_capacity` which was causing the host OS to read beyond the last sector in the card.
- Clean up the USB flashdrive code and add better debugging.
 2018-10-18 11:34:07 -05:00
Scott Lahteine
df768e7d8f Followup to #12129 2018-10-18 11:29:49 -05:00
Chris Pepper
3c13c9e3e9 [LPC176x] Fix USEABLE_HARDWARE_PWM macro, cleanup multiple LED support (#12129) 2018-10-18 11:26:50 -05:00
InsanityAutomation
a768df83cb Remove stale variable (#12136) 2018-10-18 11:26:14 -05:00
Hannes Brandstätter-Müller
c36773bffb Update the Ender-4 example config (#12131) 
- Enable filament change menu
- Enable bed-PID
- Enable s-curve acceleration
- Enable some menu items
- Update from Skorpi's new version
- Fix extruder steps, deactivate nozzle clean feature
 2018-10-17 15:49:52 -05:00
Ludy
9c71bff5e8 Update German language (#12115) 2018-10-17 11:17:06 -05:00
Nils Hasenbanck
9deb23aa47 Add missing SerialUSB definition for STM32 HAL (#12124) 2018-10-17 11:14:10 -05:00
Nils Hasenbanck
0519ef0802 Update pins for final RemRam v1.3 board (#12125) 2018-10-17 11:13:38 -05:00
InsanityAutomation
3ec3872730 Single Z raise value for all tool-changing / parking (#12090) 
* Universal tool-change Z lift
* Add TOOLCHANGE_ZRAISE to example configs
* Park/unpark changes to example configs
* Implement DEBUG_DXC_MODE
 2018-10-17 11:11:41 -05:00
Scott Lahteine
6bdbe3299e Fix a comment 2018-10-17 10:33:54 -05:00
Scott Lahteine
bc75eb2c64 Cleanup for HAL_spi_Due.cpp 2018-10-17 10:33:54 -05:00
AnHardt
d82bcdeea1 Make PULSE_STOP(E) conditional (#12121) 2018-10-17 09:52:57 -05:00
Chris Pepper
c90e26dfa6 fix normal extruder stepping (#12118) 2018-10-17 02:47:31 -05:00
Hannes Brandstätter-Müller
96bbda5d48 remove confusing comment (#12120) 2018-10-17 02:47:03 -05:00
Marcio Teixeira
f98f4ac7ea Fix and improve EXTENSIBLE_UI (#12117) 
- Add methods to access print counter data
- Clean up some inconsistent method names
- Clear lcd status after filament change
- Implement `lcd_reset_status` so it works like UltraLCD
 2018-10-16 16:58:29 -05:00
Scott Lahteine
8bf596bd4c RETRACT_ZLIFT => RETRACT_ZRAISE 2018-10-16 16:46:40 -05:00
Marcio Teixeira
056561df93 [2.0.x] Enhancements to FILAMENT_RUNOUT_SENSOR (#12069) 
- Added FILAMENT_RUNOUT_DISTANCE_MM option
- Added FILAMENT_MOTION_SENSOR option
 2018-10-16 07:28:52 -05:00
Scott Lahteine
cce4931342 Clean up recent contribs 2018-10-16 06:45:44 -05:00
Karl Andersson
8b5e51c9aa STM32F4xx modifications for HAL_STM32 (#12080) 2018-10-16 06:42:41 -05:00
Scott Lahteine
bf0c809ff2 Update M165 comment 2018-10-16 06:10:27 -05:00
AnHardt
9ac9649183 Mixer - update descriptions (#12108) 2018-10-16 06:09:02 -05:00
Scott Lahteine
9bf5d4331c Clear up some compiler warnings 2018-10-16 05:47:02 -05:00
Scott Lahteine
0139762a96 Fix a sanity check 2018-10-16 05:46:33 -05:00
Scott Lahteine
2ecb124e42 Fix trailing whitespace 2018-10-16 03:50:16 -05:00
AnHardt
f56968ba0b New Continuous Filament Mixer (#12098) 2018-10-16 03:38:57 -05:00
Ludy
2d2cd628c6 Update German language (#12094) 2018-10-16 02:59:04 -05:00
Scott Lahteine
84b59d58fb Clean up whitespace 2018-10-16 02:02:20 -05:00
swilkens
06e2afe8e0 [2.0.x] Reduce HOMING_FEEDRATE_XY for Ender 3 (#12105) 
Homing on the Ender 3 with HOMING_FEEDRATE_XY set to 50*60 was shown (#12074) to cause the end-stop micro-switches to bottom out, causing the carriage for both X and Y axis to physically crash into the micro switch. Reducing the homing speed prevents the switches from bottoming out.
 2018-10-16 01:51:47 -05:00
TheSFReader
af939c158a Option for G0 to have a separate feedrate (#12089) 2018-10-16 01:49:51 -05:00
Christopher Pepper
e5b4bf22d4 Remove debug output from flash persistent store implementation 2018-10-14 18:43:48 +01:00
Christopher Pepper
42fb7c14b0 Update the sdcard usb sharing config and apply to Re-ARM 2018-10-14 18:43:48 +01:00
Christopher Pepper
254b68fe2c servo update 2018-10-14 18:43:48 +01:00
Andy Shaw
870bfd08f5 usb and sdcard sharing improvements 
* Add traceback after watchdog timeout

Add the cpability to perform a traceback following a watchdog timeout.

* Enhanced hardware SPI

Allow use of either SSP0 or SSP1.
Ensure that no data is left in I/O buffers after calls to enable sharing of SSP hardware.

* Make flash emulation of eeprom the default

Make use of flash for eeprom storage the default. This means that usage of eeprom will not cause USB drive mount/unmount operations.

* Allow sharing of SD card

SD card I/O operations from the USB stack take place in idle loop, rather than at interrupt time. Allowing sharing of the SPI bus.

New configuration options to allow usage of the SD card to be specified.

* Fix problem with hardware SPI pins
 2018-10-14 18:43:48 +01:00
Christopher Pepper
5ddf52d58e [HAL][LPC176x] Pull out framework into separate repository 
Framework and build platform now located at https://github.com/p3p/pio-framework-arduino-lpc176x and https://github.com/p3p/pio-nxplpc-arduino-lpc176x respectively

fix mkssbase leds

move hardware serial

remove hardware/software serial

Hardware Serial extraction

HardwareSerial ISRs

fix disabled serial2 causing Serial object to link

move usb devices out to framework

separate out adc/pwm peripheral function from hal.cpp

fix includes

remove unused pwm init

move adc

HAL header update

templated filtered adc

LPC1769 platform
 2018-10-14 18:43:48 +01:00
Roman Moravčík
213e94bce2 [2.0.x] Updated slovak translation (#12059) 2018-10-14 02:15:15 -05:00
Karl Andersson
a40458405a Fix datasize error when FWRETRACT is disabled (#12086) 2018-10-14 02:14:34 -05:00
Scott Lahteine
951b25163e
Extend M217 with configurable park/raise (#12076) 2018-10-13 23:08:20 -05:00
Kevin Velickovic
ea13a77dcb Fixed Z-Probes NO/NC for Anycubic Kossel (#12083) 2018-10-13 20:34:56 -05:00
N95JPL
ab9d5eb38d Add Bootscreen Animation (#12077) 2018-10-12 22:11:20 -05:00
Scott Lahteine
26208a5c2f Clean up some boot screens 2018-10-12 18:56:39 -05:00
Scott Lahteine
9b6be0ae0f Fix lite status screen SD % 2018-10-12 17:02:59 -05:00
Scott Lahteine
af3bf6c956 Tweak config spacing 2018-10-12 16:09:27 -05:00
Scott Lahteine
a44ef27897 Outdent singlenozzle toolchange code 2018-10-12 15:19:03 -05:00
Scott Lahteine
d338e4d875 Fix singlenozzle toolchange cold extrusion test 2018-10-12 15:15:25 -05:00
Roxy-3D
25b980dddb
Remove erroneous Pin 12 definition 
There is no switchable Power Supply.   Don't put it on Pin 12.   
(Pin 12 is actually FAN1)
 2018-10-12 13:45:04 -05:00
Scott Lahteine
ddaef1a60c Clean trailing whitespace 2018-10-11 21:40:55 -05:00
Scott Lahteine
1407afad73 Move SENSITIVE_PINS to its own file 2018-10-11 01:10:11 -05:00
Scott Lahteine
45e738876a Add stepper MS3 support 
Co-Authored-By: TheLongAndOnly <thelongandonly@users.noreply.github.com>
 2018-10-11 01:10:11 -05:00
Giuliano Zaro
d43d4e4219 Refactor PRINTER_EVENT_LEDS, apply to M303 (#12038) 
Co-Authored-By: Giuliano Zaro <gmagician@users.noreply.github.com>
 2018-10-10 21:25:43 -05:00
Giuliano Zaro
d8d76cd2ba [2.0.x] Italian language update (#12060) 2018-10-10 20:13:10 -05:00
Scott Lahteine
e8d2cf4fb5 EEPROM followup (tmc_stepper_current_t) 2018-10-10 17:25:45 -05:00
Scott Lahteine
50cbca4c55 Hide some menu items when busy 2018-10-10 17:18:33 -05:00
InsanityAutomation
3cb5517ddb Make singlenozzle tool-change honor no_move (#12056) 
...Set no move earlier so it applies
 2018-10-10 16:49:59 -05:00
InsanityAutomation
d332fcb8fa Fix firmware-retract compile errors (#12061) 2018-10-10 16:46:08 -05:00
Scott Lahteine
43940d59ed Fix trailing spaces 2018-10-10 16:24:35 -05:00
InsanityAutomation
b2c1cd7eda Allow cold change of active extruder (#12055) 
Followup to #11994
 2018-10-10 09:57:48 -05:00
Scott Lahteine
d556dc1865
Fix and improve EEPROM storage (#12054) 
* Clean up Temperature PID
* Improve EEPROM read/write/validate
* Group `SINGLENOZZLE` saved settings
* Group planner saved settings
* Group filament change saved settings
* Group skew saved settings
* Group `FWRETRACT` saved settings
 2018-10-10 09:45:20 -05:00
Scott Lahteine
9b5c1a5e77 Fix EEPROM checksum bug 
Addressing #12048
 2018-10-10 06:14:58 -05:00
Scott Lahteine
272d4a5167 Apply #pragma once 2018-10-10 02:57:01 -05:00
Scott Lahteine
07d33849b0 Fix unused var warning, apply ENABLED 2018-10-09 21:31:28 -05:00
Hannes Brandstätter-Müller
a3e8cb1e44 [2.0.x] Ender-4 small improvements in Configuration (#11843) 2018-10-09 20:58:22 -05:00
Scott Lahteine
cf5284cdf2
Add SD Firmware Update capability (#12043) 
Co-Authored-By: timoxd7 <timoxd7@users.noreply.github.com>
 2018-10-09 20:00:47 -05:00
Scott Lahteine
0bd54392b7 Use uint8_t in EEPROM code 2018-10-09 19:00:01 -05:00
Scott Lahteine
ce82015d5f Fix include in G80 2018-10-09 17:24:56 -05:00
Marcio Teixeira
cef1de89d0 Fixed incorrect axis index. (#12051) 2018-10-09 16:59:34 -05:00
Marcio Teixeira
d6d48e63fb Allow #defined TYPE arg to ultralcd menu macros (#12041) 
Previously, it was not possible for the TYPE argument to ultralcd menu macros to itself be a #defined value. This made it difficult to create variables to set many related menu items to a common precision that could be easily changed.
 2018-10-08 20:01:00 -05:00
Emilio Moretti
2ef7175b42 Update Ender-2 BED_MAXTEMP (#12042) 
Also added details to the README to make sure the Ender-2 status is properly documented.
 2018-10-08 19:57:44 -05:00
Scott Lahteine
5f6aabccbe Tweak M48 spacing 2018-10-08 19:11:25 -05:00
Marcio Teixeira
ec9aa4f468 [2.0.x] Miscellaneous fixes (#12039) 
* Allow override of soft SPI pins in `pins_*.h`
* Add default case to avoid compiler warning.
* Additional pin definitions for Archim 2.
* Einsy Retro has same timings as Einsy Rambo.
 2018-10-08 18:14:52 -05:00
Marcio Teixeira
906a24fa81 Extensible user interface API (#11193) 2018-10-08 15:44:05 -05:00
InsanityAutomation
ee253991d4 Various fixups for single-nozzle filament swap (#12036) 2018-10-08 15:39:55 -05:00
Scott Lahteine
55e810d512 Fix G80 compilation 2018-10-08 13:11:36 -05:00
Scott Lahteine
d5017e2788 Add status screen with 4 nozzles 2018-10-08 01:27:21 -05:00
Scott Lahteine
7db0113b53 Improve E_AXIS_N macro 2018-10-07 18:22:05 -05:00
Nils Hasenbanck
191df5e17d Correct PWM_PIN behavior for STM32 HALs (#12027) 2018-10-07 17:08:01 -05:00
Sam Lane
f2ecf8d510 Add option to control Solenoids under PARKING_EXTRUDER (#12028) 2018-10-07 17:07:12 -05:00
InsanityAutomation
74cd6cb4fc Single nozzle filament change (#11994) 2018-10-07 17:06:14 -05:00
Scott Lahteine
bfcf570d68 Try ISR_ALIASOF for Endstop Interrupts 2018-10-07 17:05:32 -05:00
Giuliano Zaro
c0d9058e25 Shorten an Italian menu title (#12034) 
…and change a multi-use "back" menu item.
 2018-10-07 16:43:48 -05:00
teemuatlut
dffb4c63dc [2.0.x] TMC2660 followup (#12029) 
* Don't react to s2g on TMC2660. False positives
* Init with sensorless probing as well
 2018-10-07 15:37:44 -05:00
Scott Lahteine
d6b0fbd771
Use uint8_t for all fan speeds (#12032) 2018-10-07 15:34:41 -05:00
Scott Lahteine
cb7844c8d4
Save PROGMEM on serial prefixes (#12033) 
With default config and `EEPROM_SETTINGS`, saves over 200 bytes of PROGMEM.
 2018-10-07 15:32:15 -05:00
Scott Lahteine
07db08e39d Fix EXTRUDER_AUTO_FAN_SPEED comment 2018-10-06 19:51:17 -05:00
Scott Lahteine
ca0e308105 Fix up some units comments 2018-10-06 19:45:50 -05:00
Scott Lahteine
65b8f3821b Suppress temperature.h compile warning 2018-10-06 19:29:41 -05:00
teemuatlut
c447d75916 Add support for TMC2660 (#11998) 2018-10-06 17:18:10 -05:00
Scott Lahteine
cf0b9eb37c no need to use destination in do_pause_e_move 2018-10-06 16:43:21 -05:00
Scott Lahteine
e8d677620c Use NUM_SERVOS in EEPROM code 
Fix #12015
 2018-10-06 15:11:32 -05:00
Scott Lahteine
0fcdfdeed6 Followup to #12017 2018-10-06 13:23:58 -05:00
Phr3d13
acac2adfc8 Add support for MeCreator2 (#12017) 2018-10-06 12:26:49 -05:00
Thomas Moore
49823a4939 Fix broken jerk handling (#12019) 
Fix #12004
 2018-10-06 12:02:50 -05:00
Scott Lahteine
52a37913c1 Extend and apply some corrections 2018-10-06 00:27:21 -05:00
Scott Lahteine
77b9a41f1f Add G-code extensions to example configs 2018-10-06 00:15:35 -05:00
thesfreader
e09c144674 Add CNC-like G-code options 2018-10-06 00:15:27 -05:00
Scott Lahteine
33056046a3
STM32 non-generic PWM_PIN and USEABLE_HARDWARE_PWM (#12016) 2018-10-06 00:14:12 -05:00
Scott Lahteine
d5141c4e03 Fix up leading/trailing whitespace 2018-10-05 18:19:59 -05:00
Scott Lahteine
65b36642f8 Fix Anycubic Kossel config 2018-10-04 20:27:05 -05:00
Scott Lahteine
fc326b3dde Add USB_FLASH_DRIVE_SUPPORT to examples 
Co-Authored-By: marcio-ao <marcio@alephobjects.com>
 2018-10-04 19:54:12 -05:00
Marcio Teixeira
2067619a26 Add USB_FLASH_DRIVE_SUPPORT 2018-10-04 19:54:12 -05:00
Giuliano Zaro
07fe8d28be [2.0.x] Partial Italian revert (#12008) 
- Use a comma for decimals just in one message has not been a good idea.
- Full comments translation
 2018-10-04 14:38:54 -05:00
Scott Lahteine
517b4f4cd4 Fix lightweight UI hotends display 2018-10-04 14:37:24 -05:00
Giuliano Zaro
72a750e0eb [2.0.x] Update Italian language (#11996) 2018-10-04 03:03:47 -05:00
Scott Lahteine
bb561baf9e Tweak some config comments 2018-10-04 02:42:12 -05:00
Nils Hasenbanck
fcf6d127fd STM32 timer simplification (#11995) 
Prescalers aren't calculated for the given target frequency.
Stepper timer should run at 2 Mhz and temperature timer at 72 Khz.
 2018-10-03 22:33:24 -05:00
Scott Lahteine
8daadd2c8c
Fix TMC_DEBUG undefined report_tmc_status (#11993) 2018-10-03 11:56:49 -05:00
Scott Lahteine
c40ea1f0fd Update EEPROM_VERSION 
And set EEPROM_OFFSET to 0, since the historical 100 skipped bytes are never used.
 2018-10-03 11:34:34 -05:00
Scott Lahteine
1358bd9319 Make MAX_EXTRUDERS always 6 2018-10-03 11:32:19 -05:00
AnoNymous
001f26b642 Template struct simplification for serial (#11990) 2018-10-03 11:01:21 -05:00
Scott Lahteine
348004c34f
STM32F7 HAL using the official STM32 Arduino Core (#11750) 2018-10-03 03:26:07 -05:00
Scott Lahteine
3e58b3a5d4 Followup to #11943 2018-10-03 02:55:10 -05:00
teemuatlut
c3229e1b34 Migrate to a new TMC library (#11943) 2018-10-03 02:48:49 -05:00
brian park
2abf3d258d Korean language translation support (#11987) 2018-10-03 01:53:34 -05:00
Eduardo José Tagle
d6955f25b2 Expand serial support in DUE/AVR hals exploiting the templated MarlinSerial classes (#11988) 2018-10-03 00:47:27 -05:00
Eduardo José Tagle
f6f2246f59 Templatized serial classes (#11982) 2018-10-02 22:15:30 -05:00
Scott Lahteine
ee53f7d813 Revert header reorg. 2018-10-02 22:09:41 -05:00
Scott Lahteine
d619ba2685 Tweak STM32F4 config 2018-10-02 22:03:00 -05:00
LineF
d777cef837 fixed minimum macro (#11986) 2018-10-02 21:35:34 -05:00
Scott Lahteine
e3f7b69105
Add PROBING_STEPPERS_OFF (#11984) 
Co-Authored-By: houseofbugs <houseofbugs@gmail.com>
 2018-10-02 05:13:58 -05:00
Scott Lahteine
0e5bcdf695 Make DISABLE_INACTIVE_EXTRUDER a simple switch 2018-10-02 04:57:03 -05:00
Scott Lahteine
0dedb3e139
Reorganize some core headers (#11983) 2018-10-02 04:25:46 -05:00
Thomas Moore
ab4549d2bc [2.0.x] Add simultaneous retraction for mixing extruder (#11941) 2018-10-01 23:32:02 -05:00
Scott Lahteine
c75f5a376b Tweak some comments 2018-10-01 18:34:14 -05:00
Scott Lahteine
f4c625d3a1 Ensure MIN/MAX overrides 2018-10-01 05:32:55 -05:00
Scott Lahteine
3019713402 Reorganize some enums 2018-10-01 05:32:55 -05:00
Scott Lahteine
606a4362b3 Reduce STM32F4 compile warnings 2018-10-01 04:41:17 -05:00
Scott Lahteine
b3154b2120 Apply MOVE_Z_WHEN_IDLE to example configurations 
Co-Authored-By: dot-bob <gibben@gmail.com>
 2018-10-01 01:41:11 -05:00
dot-bob
b0fd8f2d74 Add option to move Z on double-click when idle 2018-10-01 01:41:11 -05:00
Scott Lahteine
389376c40e Clean up softspi.h 2018-10-01 01:29:48 -05:00
Scott Lahteine
e78bdd654d Clean up BABYSTEP options 2018-10-01 01:29:21 -05:00
InsanityAutomation
8ae113ff36 Show zprobe_zoffset when BABYSTEP_HOTEND_Z_OFFSET is disabled (#11973) 2018-10-01 00:30:10 -05:00
InsanityAutomation
2e98437392 Clean up main menu (#11972) 2018-10-01 00:15:06 -05:00
InsanityAutomation
6d862b2916 Home before level corners, if needed (#11976) 
…and add a consistent homing screen for all LCD pre-homing.
 2018-10-01 00:14:28 -05:00
Scott Lahteine
11ac75edcb
Use PGM_P for PSTR pointers (#11977) 2018-09-30 23:44:33 -05:00
InsanityAutomation
4d5566a6b7 Add filament runout sensor menu item (#11971) 2018-09-30 21:33:46 -05:00
Scott Lahteine
8489673cea Adjust some HAL formatting 2018-09-30 21:24:37 -05:00
Scott Lahteine
fb8a07660a Followup to minmax patch 
Co-Authored-By: Palatis <palatis@gmail.com>
 2018-09-30 21:17:31 -05:00
Scott Lahteine
3c40933713 Remove trailing spaces, old comment 2018-09-30 20:47:06 -05:00
Hannes Brandstätter-Müller
a3ec805c97 Anycubic Kossel Linear+: corrected DELTA_DIAGONAL_ROD (#11964) 2018-09-30 05:41:26 -05:00
AnoNymous
b30ca652ae Replace MIN# / MAX# with variadic MIN / MAX (#11960) 2018-09-30 04:59:14 -05:00
Scott Lahteine
e10f730478 Tweak vector_3::apply_rotation 2018-09-30 01:51:33 -05:00
Scott Lahteine
e2ab78d876 Fix SERIAL_PORT_2 sanity check 2018-09-30 00:24:10 -05:00
AnoNymous
a644d8cb93 Avoid copies in vector and matrix (#11959) 2018-09-29 23:04:40 -05:00
Scott Lahteine
693865a649 Fix some whitespace 2018-09-29 22:36:36 -05:00
Scott Lahteine
9903305dda
Merge pull request #9582 from tcm0116/2.0.x-sensorless_probing 
[2.0.x] Add TMC2130 sensorless probing
 2018-09-29 21:02:22 -05:00
Scott Lahteine
14df753086 Correction for block->mix_steps 
Fix #11484
 2018-09-29 19:13:17 -05:00
Alexander Amelkin
2ecfda80ac Improve support for JTAG/SWD pins reuse (#11963) 
STM32 can reuse JTAG and SWD pins separately. Add `DISABLE_DEBUG` option to disable both interfaces and retain `DISABLE_JTAG` to disable JTAG only.
 2018-09-29 19:00:49 -05:00
Scott Lahteine
bb47009656 Apply sensorless changes to example configs 2018-09-29 18:54:14 -05:00
Thomas Moore
3286325044 Add TMC2130 sensorless probing 2018-09-29 18:54:14 -05:00
Scott Lahteine
7d5c336c56 Corrections for dylsexic TMC 2018-09-29 18:51:11 -05:00
Scott Lahteine
d89d8fe852 Fix Busy State in temperature.cpp 
Fix #11954
 2018-09-29 17:03:35 -05:00
Giuliano Zaro
70e7a465d8 [2.0.x] Fix compile error (#11951) 
Fix compile error intruduced with M109 modification
 2018-09-29 13:48:23 -05:00
Hannes Brandstätter-Müller
935b120949 Anycubic Kossel: probe closer to the edge (#11950) 2018-09-29 02:26:16 -05:00
Scott Lahteine
1410e79e7f Ensure M109 handles autotemp 2018-09-29 02:12:06 -05:00
Scott Lahteine
e4389f7d23
Standard methods to wait for heating (#11949) 2018-09-29 01:44:47 -05:00
Scott Lahteine
bdc9889d3a Fix a sanity check 2018-09-29 00:24:25 -05:00
Scott Lahteine
321f9140d1 Followup to #11904 2018-09-28 20:04:40 -05:00
InsanityAutomation
23114aeb81 Fix garbled M119 output. Honor NUM_RUNOUT_SENSORS (#11948) 2018-09-28 19:00:11 -05:00
Scott Lahteine
1667ed9d1c Pause should use ECHOLNPGM 2018-09-28 18:15:38 -05:00
Victor Tseng
93839e2f73 Add option to enable/disable autoretract altogether (#11904) 2018-09-28 16:52:56 -05:00
Scott Lahteine
ad21a4f07b Tweaks to HAL format and order 2018-09-28 15:59:50 -05:00
Scott Lahteine
b682a1961a Tweak STM32F7 TMC2660 class 2018-09-27 21:13:15 -05:00
Scott Lahteine
a0a3b23e35 Reduce Raptor bootscreen by 144 bytes 2018-09-27 18:24:40 -05:00
InsanityAutomation
95d793456b Add Formbot Raptor config, fix other Formbot configs (#11926) 2018-09-27 19:20:43 -04:00
Mitch Roote
d016b572e3 [2.0.x] Add pin configuration for Fysetc F6 (#11932) 2018-09-27 19:20:19 -04:00
Alexander Amelkin
84926b1d5a HAL general support for DISABLE_JTAG option (#11211) 
Some STM32-based boards may use multiplexed JTAG pins as IO. Up to now the `DISABLE_JTAG` option (defined in pins files) was only supported for AT90-based boards. This commit generalizes the code and adds support for boards based on STM32F1 and STM32F4.
 2018-09-27 19:02:50 -04:00
Scott Lahteine
c575c5d5f6
Bring example configs up to date (#11939) 2018-09-27 18:47:26 -04:00
Scott Lahteine
6b1a4f30a8 Fix case of T-Rex 3 _Statusscreen.h 2018-09-27 17:00:55 -05:00
Scott Lahteine
ab7bfa86e2 Fix case of T-Rex-3 _Statusscreen.h 2018-09-27 17:00:55 -05:00
Scott Lahteine
241168926d Update some configs 2018-09-27 16:42:59 -05:00
Scott Lahteine
cb6454118c Workaround for Pronterface M29 2018-09-27 16:27:02 -05:00
Victor Tseng
eeab4141db [2.0.x] Anycubic Trigorilla 14 pins tweak (#11869) 2018-09-27 16:06:21 -04:00
InsanityAutomation
cb9dc56630 Add GT2560 v3 support (#11914) 2018-09-27 15:13:15 -04:00
InsanityAutomation
f2e630a05e Stow probe on probing failed (#11936) 
Prevents probe from being left down should probing fail and print job continue
 2018-09-27 13:26:14 -04:00
Hannes Brandstätter-Müller
0b602ae101 [2.0.x] Fix Anycubic Kossel with Probe V1, stuck LCD message after stow (#11929) 2018-09-27 13:23:53 -04:00
Giuliano Zaro
dc11131656 [2.0.x] fix possible race condition (#11923) 
Fix some commits done in #11900
 2018-09-25 13:56:57 -04:00
Scott Lahteine
d6b9327c11 Followup for Endstop Noise Threshold 
Followup to #11912
 2018-09-25 13:50:49 -04:00
Scott Lahteine
aa6e8e9325 Tweak some config comments 2018-09-25 13:42:28 -04:00
Scott Lahteine
5490a664f5
Expose: Homing Validation and Endstop Noise Threshold (#11912) 2018-09-24 21:59:12 -04:00
Scott Lahteine
cee34f7290
Followup for BABYSTEP_HOTEND_Z_OFFSET (#11916) 2018-09-24 21:46:56 -04:00
teemuatlut
884ad75cb8 Update config files 2018-09-24 17:26:18 -04:00
Giuliano Zaro
18e456d38d [2.0.x] fix home endstop bug (DON'T MERGE, needs discussion) (#11900) 2018-09-24 16:56:01 -04:00
Scott Lahteine
6742026568 Followup for 6 extruders 2018-09-24 14:36:50 -04:00
Scott Lahteine
04bdff4115 Add a blank line 2018-09-24 12:49:02 -04:00
Marcio Teixeira
ccbd045f02 Fixed warning about comparing signed to unsigned (#11909) 2018-09-24 12:03:29 -04:00
InsanityAutomation
1104054d73 2.0 IDEX Independent z offset and other fixes (#11862) 
* Add Formbot Raptor board

Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>

* Add a second Z probe Z offset

Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>

* Modify method to utilize live adjustment of hotend z offset

Should probably move config option to babystepping and rename as it may now apply to all multiextruder systems

* Move config item and catchup other code to current method
 2018-09-24 09:40:48 -05:00
Scott Lahteine
217e0efd20
General option PAUSE_BEFORE_DEPLOY_STOW (#11905) 2018-09-24 00:43:43 -04:00
Scott Lahteine
849dea92a8 Move probe extras below probe types 2018-09-23 23:23:07 -04:00
Scott Lahteine
a2b0260f0f Update Sublime files 2018-09-23 19:59:08 -04:00
Hannes Brandstätter-Müller
a4cdffdd69 Support for manually deployed fixed probes (#11899) 2018-09-23 19:59:08 -04:00
Scott Lahteine
ddcbf80f23 Followup for Z_TRIPLE_ENDSTOPS 2018-09-23 12:22:31 -04:00
Marcio Teixeira
c411e7eb0d [2.0.x] Squelch compiler warnings seen with -Wall (#11889) 2018-09-23 12:00:34 -04:00
Roxy-3D
83105590a0 Better default values for Mesh Inset 2018-09-22 03:25:18 -04:00
Roxy-3D
4163c1a514 Fix end stop and Z-probe reporting logic 2018-09-22 03:25:18 -04:00
Scott Lahteine
ea9eb2fc8f Fix servo angles in config-store 2018-09-21 15:41:36 -04:00
Roxy-3D
d3d6be8210 Add MAX7219 reverse units option (#11860) 2018-09-19 18:54:51 -05:00
Scott Lahteine
beab9733f8 Remove extra clauses in config-store 2018-09-19 17:06:51 -05:00
Scott Lahteine
5a74b12b45 Followup to #11769 2018-09-19 16:40:32 -05:00
InsanityAutomation
f38570ac55 Add custom user menu title (#11769) 2018-09-19 15:04:34 -05:00
Scott Lahteine
17494099a9 Fix parking_extruder_tool_change 
Fix #11872
 2018-09-19 03:02:07 -05:00
Scott Alfter
140caf99b8 E0_CS_PIN moved from A13 to A15 on RAMPS-FD v2.2 (#11865) 2018-09-18 22:24:20 -05:00
Scott Lahteine
10590c2f80 Fix some fan conditionals 2018-09-18 21:23:33 -05:00
Scott Lahteine
e4ee607fc8 Fix Dual X FRS in M600 
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
 2018-09-18 21:23:33 -05:00
Scott Lahteine
bae8f82ba8
[2.0] Fix Mixing Extruder mixing factors (#11861) 2018-09-18 01:10:41 -05:00
Scott Lahteine
c5e5cc5e9f Fix some trailing whitespace, macros 2018-09-17 17:30:04 -05:00
AnHardt
54bd124665 2.0.x: Fix normalize_mix() (#11856) 
Mix factors needed to be updated consistent with the recent Stepper/Planner code refactor.
 2018-09-17 16:37:38 -05:00
Roxy-3D
5fbfbde532
Fix example file to pull in correct pins file 2018-09-17 10:41:30 -05:00
Roxy-3D
378f354939
IDEX Scaled Duplication is still under development 
Take it out of the menu until it is tested and working.
 2018-09-17 10:26:44 -05:00
Scott Lahteine
65045ba54b tmc_util fix part 2 
Followup to 115abf9
 2018-09-17 05:36:17 -05:00
Scott Lahteine
09a2bee8aa
Support more filament runout sensors in M119 (#11851) 2018-09-17 03:27:13 -05:00
Scott Lahteine
115abf9c53 Fix syntax error in front of tmc_axes 2018-09-17 01:10:20 -05:00
Roxy-3D
0780913848 IDEX Improvements (#11848) 2018-09-17 01:06:22 -05:00
Scott Lahteine
39732838b4 Tweak indent of Chinese languages 2018-09-17 00:58:32 -05:00
Scott Lahteine
53bd0b55cb Followup for 6 extruders 2018-09-16 23:57:50 -05:00
Scott Lahteine
1718eff54a Code changes supporting up to 6 extruders 2018-09-16 22:32:53 -05:00
Scott Lahteine
f5c210d33d Config changes supporting up to 6 extruders 2018-09-16 22:22:35 -05:00
Scott Lahteine
d948c6e867 RADDS Extension Board V3 support 2018-09-16 22:22:35 -05:00
Thomas Moore
c437bb08f1 Overhaul of the planner (#11578) 
- Move FWRETRACT to the planner
- Combine leveling, skew, etc. in a single modifier method
- Have kinematic and non-kinematic moves call one planner method
 2018-09-16 21:24:15 -05:00
Scott Lahteine
8323a08642 Clean up some whitespace 2018-09-16 19:44:21 -05:00
Scott Lahteine
6286afd456 Add Triple-Z options to example configs 2018-09-16 00:35:58 -05:00
Holger Müller
1a6f2b29b8 Add support for Triple-Z steppers/endstops 2018-09-16 00:35:58 -05:00
Hannes Brandstätter-Müller
bc06406d7d Fix Anycubic Kossel config (probe crash) (#11832) 2018-09-15 23:27:21 -05:00
Scott Lahteine
66f83d33e6 Fix some config comments 2018-09-15 23:21:55 -05:00
Hannes Brandstätter-Müller
84ed9b5a63 Send "G33 S P1" for Delta Height Calibration (#11831) 2018-09-15 20:17:35 -05:00
Scott Lahteine
215eee4fe5 Use 'friend' to access set_directions 2018-09-15 20:11:10 -05:00
Cassiano Leal
ff51e7322d Fix for Stepper::set_directions() compilation error (#11838) 2018-09-15 19:31:51 -05:00
Scott Lahteine
809b232fa2 Fix stepper directions after M501/M502 
See https://github.com/MarlinFirmware/Marlin/issues/11103#issuecomment-421387611

Co-Authored-By: tcm0116 <tcm0116@users.noreply.github.com>
 2018-09-14 20:00:55 -05:00
Scott Lahteine
f79a5a9dee Tweak spacing of L6470 options 2018-09-12 23:18:11 -05:00
Hannes Brandstätter-Müller
c37d3ae97d [2.0.x] Fix NOZZLE_PARK_FEATURE for Anycubic Kossel (#11812) 2018-09-12 15:37:38 -05:00
HenningJW
4fb2134f00 Fix non-sensical values for Zonestar themistor table (#11817) 
Values taken from Zonestar firmware for P802QA with a Melzi board. Timestamps from the firmware package are from April 2016.
 2018-09-12 15:36:04 -05:00
Scott Lahteine
b220a825a7 Fix raw_filwidth_value error 2018-09-12 04:31:55 -05:00
Scott Lahteine
1933d5d6fb Fix SD autostart with no LCD 2018-09-12 03:49:59 -05:00
Roman Moravčík
8bce5370c7 Updated slovak translation (#11807) 2018-09-12 03:29:17 -05:00
Giuliano Zaro
64d629ba2a [2.0.x] Italian language fix (#11796) 2018-09-12 03:28:22 -05:00
Scott Lahteine
8584d3697d Fix servo count define conflict 
`MAX_SERVOS` => `NUM_SERVO_PLUGS`
 2018-09-11 16:20:31 -05:00
Scott Lahteine
06949ae510 Fix MSG_FILAMENT_CHANGE_HEAT_1 for small LCD 2018-09-10 23:21:37 -05:00
Scott Lahteine
d882717d98
Save some PROGMEM with constexpr (#11798) 
When possible, make `active_extruder` a `constexpr` to save some PROGMEM.
 2018-09-10 23:09:26 -05:00
Sam Lane
4f883d5971 [2.0.x] Extruder-Distinct Linear Advance K Factors (#11789) 2018-09-10 22:37:32 -05:00
Scott Lahteine
fe9f088d60
[2.0.x] Anycubic LinearPlus, Trigorilla 1.4 (#11730) 2018-09-10 21:25:40 -05:00
Scott Lahteine
b6aae2b322 Tweak RAMPS_FD_V1 pins 2018-09-10 15:43:03 -05:00
Scott Lahteine
7391e23332 Fix RigidBoard FAN_PIN collision 2018-09-10 05:29:00 -05:00
Scott Lahteine
53b8c3bd66 Add EXTERNAL_CLOSED_LOOP_CONTROLLER to examples 2018-09-10 03:17:17 -05:00
Sam Lane
1b6bc19427 Add external closed loop controller support 2018-09-10 03:17:17 -05:00
Marcio Teixeira
2ebfe90be9 Add custom preheat temp to filament change (#11475) 2018-09-10 02:51:46 -05:00
Karl Andersson
69d0ed5791 [2.0.x] Fix ambiguous function call (SERIAL_PROTOCOL_F) when using Arduino_Core_STM32 (#11747) 2018-09-10 02:36:06 -05:00
Scott Lahteine
d32c4efc77 Fix some trailing whitespace 2018-09-10 01:26:20 -05:00
Alexander Amelkin
bc1ba998b2 [2.0.x] Fix undefined symbol 'g29_in_progress' (#11781) 2018-09-09 22:06:03 -05:00
InsanityAutomation
bad225dc04 Fix mesh leveling compile errors (#11768) 2018-09-09 04:19:48 -05:00
Sam Lane
d783400330 Updates to STM32F7 HAL, for completeness (#11770) 2018-09-09 03:26:15 -05:00
Scott Lahteine
72af8e0f02 Patch extruder_advance_K edit menu 
Fix #11776
 2018-09-09 03:21:08 -05:00
Sebastianv650
7e8c073fba Fix extruder stops extruding with LA (#11758) 2018-09-09 00:04:14 -05:00
Scott Lahteine
0c01099f17 hop_amount => current_hop 2018-09-08 21:20:37 -05:00
Scott Lahteine
eafd62308e
Use TMC2208Stepper v0.2.5 (#11714) 2018-09-08 20:41:21 -05:00
Kevin
e25d2ae4a2 [2.0.x] SWITCHING_TOOLHEAD (#11623) 2018-09-08 01:43:24 -05:00
Alexander Amelkin
f417408df1 [STM32F1] Fix HAL for new PlatformIO (#11749) 2018-09-07 18:15:32 -05:00
Roxy-3D
3d7f2c1fde
Fix directory name to be consistent (#11745) 2018-09-06 14:10:40 -05:00
Roxy-3D
a9c98a0e47
Create _Bootscreen.h 2018-09-06 10:24:03 -05:00
Roxy-3D
9f85d3a9cb
Create _statusscreen.h 2018-09-06 10:23:20 -05:00
Roxy-3D
e2e7b1d705
Break out support of the T-Rex 3 2018-09-06 10:20:20 -05:00
Roxy-3D
67996c2b66
Break out support for the T-Rex 3 2018-09-06 10:19:05 -05:00
Roxy-3D
9c8d9d282f
Break out support for Formbot T-Rex3 from previous versions 2018-09-06 09:49:04 -05:00
Roxy-3D
e3aac59637
Create pins_FORMBOT_TREX3.h 2018-09-06 09:46:23 -05:00
Roxy-3D
f580247581
Create pins_FORMBOT_TREX2.h 2018-09-06 09:45:29 -05:00
Roxy-3D
073857646b
seperate the T-Rex2 and T-Rex3 support 2018-09-06 09:43:43 -05:00
Roxy-3D
fe4fc2883b
Add support for Formbot T-Rex3 2018-09-06 09:41:59 -05:00
Scott Lahteine
2a61c9a939 Various fixups to configs, spacing, etc. 2018-09-06 06:44:31 -05:00
Scott Lahteine
b3efbc6e6e Add MANUAL_E_MOVES_RELATIVE to more configs 2018-09-06 02:09:14 -05:00
Scott Lahteine
679e4602fe Add MANUAL_E_MOVES_RELATIVE to examples 2018-09-06 02:00:25 -05:00
Marcio Teixeira
beb51c2d58 Show manual extrusion moves as relative in LCD 
- Implements FR#11724
- Old behavior can be restored by commenting out MANUAL_E_MOVES_RELATIVE
 2018-09-06 02:00:25 -05:00
Scott Lahteine
d10f29ae2e Pass segment length in G2-G3 2018-09-06 01:43:27 -05:00
Scott Lahteine
dcfde2317f
Pass segment length in prepare_kinematic_move_to (#11737) 2018-09-06 01:40:22 -05:00
Roxy-3D
d5379ee9d6
Fix search for white space in enqueued commands 2018-09-05 16:57:08 -05:00
Roxy-3D
8d5bea073b
Assume one Max7219 unit if not specified 2018-09-05 14:18:13 -05:00
Roxy-3D
9651ceb36b
Correct spelling of #endif 2018-09-05 10:46:08 -05:00
Scott Lahteine
b213a89ef5 Sanity-check NOZZLE_PARK_POINT 2018-09-05 06:18:08 -05:00
Scott Lahteine
86ee74731e Comment for RADDS + RRDFGSC 2018-09-05 05:45:17 -05:00
Kevin
ae1271b2ae RADDS: Update Full Graphic Display Pins (#11731) 2018-09-05 03:51:54 -05:00
Scott Lahteine
650d4313c4 Bring some configs up to date 2018-09-05 03:49:24 -05:00
AnHardt
530a13ab6c [2.0.x] SECURITYFIX missing max temp error when PID is used (#11717) 2018-09-05 01:41:45 -05:00
Scott Lahteine
12fded46c2 Correct some FR strings 
Co-Authored-By: pipersw <pipersw@users.noreply.github.com>
 2018-09-04 04:00:22 -05:00
Michael Triffon
aefc2f7cf9 Add Anet A2 and A2 Plus Configurations (#11677) 2018-09-03 23:38:51 -05:00
scott0122
72fdb6bab3 Fix SWITCHING_NOZZLE zdiff (#11683) 2018-09-03 23:24:40 -05:00
Scott Lahteine
8b837dc3ad No need for last \n in G-code items 2018-09-03 23:23:20 -05:00
Scott Lahteine
d1ceaf5550
[2.0.x] Followup to IDEX changes (#11707) 2018-09-03 23:15:31 -05:00
Roxy-3D
d62f4df0b7
Disable LCD Pins used by new Max7219 hook up if in that mode 2018-09-03 09:56:25 -05:00
Roxy-3D
fa772c31bf
Provide more options for Max7219 connection on Formbot 2018-09-03 09:52:36 -05:00
Scott Lahteine
8e18e48d49
Merge pull request #11610 from Freeviv/bugfix-2.0.x 
[2.0.x] Editable servo angles
 2018-09-03 03:55:38 -05:00
Giuliano Zaro
59e76e5fdf [2.0.x] Fix planner computation (#11708) 
Fix #11697
 2018-09-03 00:29:29 -05:00
Roxy-3D
7680b64aa6
IDEX clean up (#11690) 2018-09-02 10:18:59 -05:00
teemuatlut
49e107cea9 Restrict SW serial to AVR (#11696) 2018-09-01 15:24:44 -05:00
Scott Lahteine
18f1af2dca Fix up Teensy tests, servo sanity 2018-09-01 01:10:20 -05:00
Scott Lahteine
74a04aed55 Fix compile error with NO_LCD_MENUS 2018-08-31 19:16:04 -05:00
Scott Lahteine
509e1cf2bd Add *_DRIVER_TYPE to remaining configs 2018-08-31 19:07:17 -05:00
Scott Lahteine
d55f44edba
Printcounter improvements (#11689) 2018-08-31 17:40:39 -05:00
Scott Lahteine
6a3207391f Remove obsolete HAL_timer_restrain 2018-08-31 16:17:22 -05:00
Scott Lahteine
e3fc9aa35f Update some config comments 2018-08-31 16:03:44 -05:00
Scott Lahteine
136860e8bb Sanity-check SERVO pin for servo probes 2018-08-31 15:47:47 -05:00
Roman Moravčík
66de50f5f8 Updated slovak translation (#11684) 2018-08-31 15:37:49 -05:00
scott0122
ada85d5585 Improve HOTEND OFFSET Z display precision to 3 (#11686) 2018-08-31 15:15:40 -05:00
scott0122
607c1e58d9 Improve HOTEND OFFSET Z display precision to 3 (#11685) 2018-08-31 15:14:33 -05:00
Scott Lahteine
3e81745e81 Fix issues, make optional 2018-08-29 17:58:02 -05:00
Jan
aa80e448e2 Store servo angles in EEPROM 2018-08-29 17:58:02 -05:00
Scott Lahteine
9953213513 Add EDITABLE_SERVO_ANGLES to example configs 2018-08-29 17:57:52 -05:00
Marcio Teixeira
0966bdcbc4 Reorganized ultralcd menu (10317) (#10360) 
Replaced "Prepare" and "Control" menus with "Movement", "Temperature", "Configuration" and "Advanced Settings"
 2018-08-29 16:51:14 -05:00
Scott Lahteine
e40a3eef04 Support for Anet A2 Plus 2018-08-29 03:39:43 -05:00
Scott Lahteine
32e38fee74 Update Controller Fan for Y2,Z2 2018-08-29 01:49:48 -05:00
Jeonghwan Roh
59cf217e77 Fix 5 mixing steppers 2018-08-29 01:49:48 -05:00
Scott Lahteine
2a2e8c314e Suppress emergency parser G-code errors 
Co-Authored-By: srieche <srieche@users.noreply.github.com>
 2018-08-29 01:04:55 -05:00
Ilya Bukhonin
7ecb8b4af5 [2.0.x] Teensy 3.1 and 3.2 support (#11460) 2018-08-27 21:49:49 -05:00
Pablo Crespo
409a0632af [2.0.x] Add Morpheus Board support (#11651) 2018-08-27 21:28:03 -05:00
Marcio Teixeira
0f14977b5d LIGHTWEIGHT_UI: Allow feedrate % to exceed 255% (#11656) 
- Changed type of integer used for feedrate percentage from uint8_t to uint16_t.
 2018-08-27 21:26:32 -05:00
scott0122
6dc9553aa5 Fix SWITCHING_NOZZLE compile error (#11657) 2018-08-27 21:25:25 -05:00
Scott Lahteine
a15e570d3b Fix SD progress with Lite Status Screen 
Co-Authored-By: Lê Hoàng <icy.lord.love.angel@gmail.com>
 2018-08-26 17:12:05 -05:00
Scott Lahteine
66966dbd69 Tweak comments for newer multiplexer 2018-08-25 17:00:49 -05:00
Scott Lahteine
933d833ec8 Tweak some Anet A6 comments 2018-08-24 21:50:53 -05:00
Scott Lahteine
d1c9517903 Followup to hotend_offset[Z] patch 2018-08-24 21:32:00 -05:00
Scott Lahteine
e2b8fc4f17 Reduce some debug strings 2018-08-24 21:11:39 -05:00
Chris Pepper
b71c2b8651 [2.0.x] Update LPC176x tests, fix clean script (#11617) 2018-08-24 18:53:24 -05:00
Scott Lahteine
a317bb4991 Remove stray tab 2018-08-24 17:35:13 -05:00
Scott Lahteine
acf5ae3083 !ENABLED => DISABLED 2018-08-24 16:36:37 -05:00
Scott Lahteine
ba1919c1eb HAL tweaks to LPC1768 main 2018-08-22 17:16:18 -05:00
Scott Lahteine
0987ed2a18 Use American English 2018-08-22 17:16:18 -05:00
Kevin
6483285bc5 HOTEND_OFFSET_Z always available (#11603) 2018-08-22 00:21:29 -05:00
Michael Triffon
f8c52c9c29 Azteeg X5 Mini WiFi support (#11601) 2018-08-21 23:58:26 -05:00
jneilliii
3671c63cde Einsy Full Graphic LCD Fix (#11604) 
Fixed issue with LCD timings for Einsy RAMBo board.
 2018-08-21 23:43:52 -05:00
Colin Gilgenbach
593d5375ea Fix G28 resetting DUAL_NOZZLE_DUPLICATION_MODE (#11605) 
There's no reason for G28 to reset DUAL_NOZZLE_DUPLICATION_MODE, because it only affects the E stepper, unlike DUAL_X_CARRIAGE which affects the X steppers as well.
 2018-08-21 23:42:55 -05:00
Scott Lahteine
f0dbe61692 Tweaks to motion.h reachable tests 2018-08-21 23:34:29 -05:00
Scott Lahteine
2d3317a35b Prettify Dual X Carriage description 2018-08-21 23:34:29 -05:00
Roxy-3D
cd9868f442
Make position_is_reachable() smarter about IDEX machines` 
On many IDEX machines the allowed travel of the X1 carraige and X2 carraige does not perfectly overlap.

This helps the issue.   But more work needs to be done at the higher level.  (For example the X1_MAX_POS should probably be factored into G26's mesh validation pattern.)
 2018-08-21 19:12:26 -05:00
Scott Lahteine
97f6396b25 Fix RE_ARM LCD pins to avoid #undef 2018-08-21 12:47:40 -05:00
Scott Lahteine
0e25f66c09 Fix Ultimaker servo pin 
As pointed out at https://github.com/MarlinFirmware/Marlin/issues/7981#issuecomment-407116642
 2018-08-21 11:39:53 -05:00
Scott Lahteine
ad12b9b46b Fix indentation, whitespace, spelling, formbot pins... 2018-08-21 09:47:57 -05:00
Scott Alfter
b5537dde7f need to add E2END to pins_RAMPS_FD_V2.h (#11564) 2018-08-21 02:16:31 -05:00
Scott Lahteine
8f0bbdcc9b
Fix up Max7219 orientations (#11596) 2018-08-21 02:06:18 -05:00
jmz52
a77f8c6dd5 Implement servo support for STM32F1 (#11580) 
Implement servo support for STM32F1. Original code was incomplete and depended on Servo library from stm32duino which conflicts with `module/servo.h`.
 2018-08-20 21:13:51 -05:00
Dave Johnson
0456caf0ad Consolidate shared HALs and isolate HAL compile (#11552) 2018-08-20 21:11:12 -05:00
jmz52
dfe18ac633 Fix compilation error for STM32F1 with U8GLIB_SSD1306 or U8GLIB_SH1106 enabled (#11583) 
The `binary.h` file required by `lcd/dogm/dogm_bitmaps.h` is not present in stm32duino environment. Binary macros are defined in `bit_constants.h` in stm32duino framework.
 2018-08-20 20:37:56 -05:00
Roxy-3D
b0a8ce59bd
Update Boards.h to include Formbot support 2018-08-20 16:46:27 -05:00
Roxy-3D
62ce937540
Update pins.h to include the Formbot board 2018-08-20 16:44:54 -05:00
Roxy-3D
a82be36d5d
Create pins_FORMBOT.h 2018-08-20 16:43:42 -05:00
ghent360
00d24a8219 Don't call __delay_4cycles for 0 cycle delay - takes a really long time. (#11586) 2018-08-18 22:50:11 -05:00
Scott Lahteine
56f1e17a25
[2.0.x] Max7219 cleanup, simplify, and extend (#11575) 2018-08-18 01:33:13 -05:00
jmz52
0b2d686160 Fix "SD init fail" problem for STM32F1 (#11579) 
Fix "SD init fail" problem for STM32F1 caused by incorrect SS pin state and incorrect SPI mode. Issue #11225
 2018-08-17 23:27:10 -05:00
Kevin
db30650731 Fix UBL/Homing (#11566) 2018-08-16 08:28:40 -05:00
Roxy-3D
aae4c67e5d
Max7219 Clean Up (#11563) 
Some of the Rotations did not do the right thing with setting and clearing pixels.
I think it is correct now.   But if not...  It is much closer to being correct.
 2018-08-15 21:22:28 -05:00
InsanityAutomation
9de730b2bf Update tool_change.cpp (#11559) 2018-08-15 19:30:52 -05:00
InsanityAutomation
c2553f9888 2.0.x - Idex match119 (#11556) 
* Update ubl_G29.cpp

* Update ultralcd.cpp
 2018-08-15 13:26:11 -05:00
Roxy-3D
e9de321ac0
declare void Max7219_register_setup(); 2018-08-15 10:36:51 -05:00
Scott Lahteine
952a1bc9d5
Merge pull request #11551 from thinkyhead/bf2_trinamic_fixes 
[2.0.x] Fix TMC2208 SW serial communication
 2018-08-14 19:07:08 -05:00
petrzjunior
67613bf5bd Update Czech translations (#11510) 2018-08-14 18:45:16 -05:00
Scott Lahteine
bd6d032628 Update default driver configuration 
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
 2018-08-14 18:42:04 -05:00
Scott Lahteine
1561e61df7 New TMC2208 constructor 
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
 2018-08-14 18:41:51 -05:00
Nils Hasenbanck
b37bfeffeb [2.0.x] Use the new const functions of the persistentStore api (#11544) 2018-08-14 18:35:36 -05:00
Chris Pepper
5573ef62c6 [2.0.x] PersistentStore update followup (#11549) 2018-08-14 17:54:12 -05:00
Scott Lahteine
846bd24eb9 MALYAN_LCD is ok without SD 2018-08-14 05:31:47 -05:00
Scott Lahteine
834ea7fcea Remove 'const' from PersistentStore::capacity 2018-08-14 04:46:10 -05:00
Dave Johnson
c64199941e Compile only selected PIO environment (#11519) 2018-08-14 03:28:52 -05:00