3741 commits

Author	SHA1	Message	Date
Scott Lahteine	03d5709b09	M110 is a known command ... - The command parser now displays “unknown command” in more cases. Known commands must be added to the `switch` inside `process_commands` to suppress the error.	2015-05-26 20:31:18 -07:00
Scott Lahteine	d76a01194d	Slight size reduction by adding idle()	2015-05-26 20:08:21 -07:00
Richard Wackerbarth	2deb5a8ac5	Temporary Hack ... REVERT THIS CHANGE In proper use, we want to force the vendor to update this file to reflect distribution parameters However, until most users have converted to automatic versioning, we “grant them a pass”	2015-05-25 15:54:08 -05:00
Richard Wackerbarth	b5743d6927	Use SOURCE_CODE_URL rather than FIRMWARE_URL	2015-05-25 15:53:34 -05:00
Richard Wackerbarth	5ea139fd79	Revised Versioning mechanism	2015-05-25 15:53:14 -05:00
AnHardt	da246f5cb1	Activate BED_MINTEMP error. ... And call _temp_error() directly for ERR_MAXTEMP_BED to avoid the only one time use of bed_max_temp_error(). Includes #2156.	2015-05-25 13:23:19 +02:00
AnHardt	959da98d8e	Call kill() only once when triggered by a temperature error ... to avoid stack overflow when called from interrupt. Some clean up for calls of disable_all_heaters(). 'disable_all_heaters()' is called in kill() and again when 'killed' is already set inside _temp_error().	2015-05-25 12:44:03 +02:00
Scott Lahteine	68f6f149d0	Reduce code size with out_of_range_error function ... - Affects code size when automatic bed leveling is enabled	2015-05-24 20:18:02 -07:00
wurstnase	94120740d8	faster compare ... !(~(ab)&0x3) and ab == 0x3 are equal	2015-05-23 07:55:15 +02:00
Scott Lahteine	c9141e604a	Merge pull request #2145 from thinkyhead/gcode_folding ... Indentation in process_commands	2015-05-22 18:47:37 -07:00
Scott Lahteine	b55f8718c3	Indent G90/G91, G92	2015-05-22 17:34:08 -07:00
Scott Lahteine	b0d520b109	Indent G30, G31/G32	2015-05-22 17:33:17 -07:00
Scott Lahteine	ffe27a6225	Indent G29	2015-05-22 17:32:46 -07:00
Scott Lahteine	86083badc2	Indent G4, G10/G11, G28	2015-05-22 17:32:27 -07:00
Scott Lahteine	47d7a9cb5e	Indent G2/G3	2015-05-22 17:31:38 -07:00
Scott Lahteine	350f239d84	Indent G0/G1	2015-05-22 17:31:24 -07:00
Scott Lahteine	672b0c1fd3	Cleanup pins in RAMPS_13_EFB boards	2015-05-22 16:20:54 -07:00
Scott Lahteine	15a2351675	No need for +1 on initial seen_pointer	2015-05-22 15:31:30 -07:00
Scott Lahteine	550dd87b2a	Set seen_pointer before calling code_value	2015-05-22 15:11:48 -07:00
Scott Lahteine	38cc0b93c6	Merge pull request #1874 from AnHardt/Bulgarian ... Introduction of Bulgarian - language_bg.h	2015-05-22 13:59:50 -07:00
Scott Lahteine	04a1622172	Merge pull request #2127 from Wackerbarth/Kossel_Pro ... Kossel Pro	2015-05-21 18:43:26 -07:00
Scott Lahteine	81c2ca3e10	Merge pull request #2131 from thinkyhead/bq_is_ramps_13_efb ... Witbox and Hephestos are RAMPS EFB	2015-05-21 18:39:02 -07:00
Scott Lahteine	f919a2fed1	Merge pull request #2134 from AnHardt/preheat-all ... Shift call of start_watching_heater() into setTargetHotend()	2015-05-21 18:36:28 -07:00
Scott Lahteine	063881b5bd	Fix a couple of doubled semicolons	2015-05-21 18:15:29 -07:00
AnHardt	94dff5b36a	Merge pull request #2137 from thinkyhead/tweak_swh ... Move millis call in start_watching_heater	2015-05-22 02:02:07 +02:00
Scott Lahteine	70d2f48d4e	Merge pull request #2136 from thinkyhead/M303_suppress_error ... Suppress the line mismatch error after M303	2015-05-21 16:46:30 -07:00
AnHardt	0c0ace2a04	Remove start_watching_heater() fom M104 and M109	2015-05-22 01:44:50 +02:00
Scott Lahteine	00716d0ca0	Small start_watching_heater adjustment	2015-05-21 16:44:49 -07:00
Scott Lahteine	834747deb7	Merge pull request #2135 from Wurstnase/new_endstop_bits ... new endstop bits	2015-05-21 16:35:54 -07:00
Scott Lahteine	bde9c70d42	Suppress the line mismatch error after M303	2015-05-21 16:27:22 -07:00
Scott Lahteine	50bd7493cc	Merge pull request #2108 from thinkyhead/m33_long_filename_host_support ... M33 LONG_FILENAME_HOST_SUPPORT	2015-05-21 16:22:47 -07:00
Scott Lahteine	4d11b29959	Merge pull request #2113 from thinkyhead/command_sanitizer ... Command sanitizer	2015-05-21 16:21:58 -07:00
wurstnase	ff98b8632b	new endstop bits	2015-05-21 23:16:43 +02:00
AnHardt	9b0fa9c309	Changed dependency of start_watching_heater() in setTargetHotend() to THERMAL_PROTECTION_HOTENDS	2015-05-21 21:07:37 +02:00
AnHardt	bc0764894a	Shift call of start_watching_heater() into setTargetHotend() ... to warrant watching is set or reset. Make setTargetBed() in _lcd_preheat() dependant of TEMP_SENSOR_BED. Use disable_all_heaters() in lcd_cooldown() and abort_on_endstop_hit.	2015-05-21 20:36:11 +02:00
Richard Wackerbarth	b878bc5620	Introducing the Kossel Pro Build Configuration	2015-05-21 11:47:34 -05:00
Richard Wackerbarth	1d8f61ca8a	AT90USB is defined in pins.h	2015-05-21 11:46:54 -05:00
Richard Wackerbarth	735bf2d35f	Describe Custom M Code	2015-05-21 08:06:33 -05:00
Scott Lahteine	f39658c822	M120 and M121 are reversed	2015-05-21 00:17:44 -07:00
Scott Lahteine	6eb4f90ce7	Also synchronize configurator copies of configs	2015-05-20 21:34:00 -07:00
Scott Lahteine	9d1961ebe3	Witbox and Hephestos are just RAMPS_13_EFB	2015-05-20 21:33:23 -07:00
AnHardt	4422365a53	Merge branch 'Development' of https://github.com/MarlinFirmware/Marlin into _temp_error	2015-05-20 23:34:39 +02:00
AnHardt	4113762062	Merge pull request #2130 from AnHardt/kill2 ... Add a string parameter to kill()	2015-05-20 23:32:51 +02:00
AnHardt	89d2ee6f13	Make output on display dependant of ULTRA_LCD	2015-05-20 22:03:16 +02:00
AnHardt	120d4c7a8c	Merge remote-tracking branch 'origin/kill2' into _temp_error	2015-05-20 21:25:32 +02:00
AnHardt	cb6e82dc60	Change from kill() to kill(const char *) ... in temperature.cpp	2015-05-20 21:22:48 +02:00
AnHardt	9d13942278	Use new kill() with parameter.	2015-05-20 21:18:52 +02:00
AnHardt	6398c5e28d	Merge remote-tracking branch 'origin/kill2' into _temp_error	2015-05-20 21:08:19 +02:00
AnHardt	f4a93ed997	Add a string parameter to kill() ... Makes the output on the LCD adjustable.	2015-05-20 20:53:48 +02:00
AnHardt	2990c6c45f	Use new kill_() for _temp_error() ... instead of stop(). We really want to require a reset and no chance to set a new temperature.	2015-05-20 14:03:14 +02:00
AnHardt	9b8c6ed254	Merge pull request #2120 from chris-bo/dogm_config ... move dogm font selection to configuration_adv.h	2015-05-20 10:11:34 +02:00
AnHardt	06513565e9	Merge pull request #2105 from eboston/Development ... Add ELB_FULL_GRAPHIC_CONTROLLER with ADAFRUIT_ST7565 display.	2015-05-20 09:56:21 +02:00
Ed Boston	082ed3beed	Propagate Configuration.h changes ... Updated all the example Configuration.h files for the new display type.	2015-05-19 14:04:57 -07:00
Ed Boston	152b681bb5	Added link to controller github ... Added the link to the github information about the ELB_FULL_GRAPHIC_CONTROLLER	2015-05-19 04:14:55 -07:00
AnHardt	995b84944b	Merge pull request #1982 from CONSULitAS/Development_Update_language.h ... language.h: update documentation / URL für K8200	2015-05-19 12:13:35 +02:00
Scott Lahteine	7bc5fd8193	Merge pull request #2123 from AnHardt/Duemilanove ... Remove Duemilanove	2015-05-18 20:36:05 -07:00
Scott Lahteine	94de1e0d93	Merge pull request #2116 from AnHardt/wording ... transpire -> expire	2015-05-18 20:34:46 -07:00
AnHardt	4d4fa3607b	Remove Duemilanove ... No way to fit Marlin into 32K.	2015-05-19 02:46:37 +02:00
AnHardt	e353d27430	Merge branch 'Development' of https://github.com/MarlinFirmware/Marlin into Bulgarian	2015-05-18 23:56:53 +02:00
Ed Boston	ca8d1756d5	Define fixes ... Fixed a couple defines that were not changed or commented out.	2015-05-18 14:23:31 -07:00
CONSULitAS	b96b28b7cc	language.h: update documentation for LANGUAGE_INCLUDE ... language.h: update documentation for LANGUAGE_INCLUDE @thinkyhead What do you think? I think there should be a warning like this.	2015-05-18 23:11:26 +02:00
Christian Bohn	258bcdefe0	move dogm font selection to configuration_adv.h	2015-05-18 22:54:53 +02:00
AnHardt	7750180c93	transpire -> expire ... Minor wording correction.	2015-05-18 21:48:10 +02:00
AnHardt	70163dafb9	Use _temp_error() for all errors thrown by different mechanisms ... Now ending in an endless loop. Tidy up the output format. We now get: ERRORTEXT ", system stopped! Heater_ID: " HEATERID Where ERRORTEXT can be: "Heating failed" "Thermal Runaway" "MAXTEMP triggered" "MINTEMP triggered" and soon "Thermal Jump" HEATERID can be 0, 1, 2 ,3 , "bed" This messages are always followed by the common: "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"	2015-05-18 20:26:25 +02:00
Scott Lahteine	a0f362c735	Simplify & optimize with current_command_args	2015-05-18 07:08:04 -07:00
Scott Lahteine	adc8fcb77f	More parser comments, optimize code_seen, save with goto	2015-05-18 07:08:04 -07:00
Scott Lahteine	c6d8dd19d9	use fetched value	2015-05-18 07:08:04 -07:00
Scott Lahteine	1116e13f5a	Further optimization of command parser	2015-05-18 07:08:03 -07:00
Scott Lahteine	3a4c3ab76e	Pre-sanitize the command before handling ... - Use a global pointer for the current sanitized command - Pre-sanitize the current command to bypass `N` and nullify `*`, removing the need for handlers to bypass, ignore, or nullify these parts, and reducing overhead for `code_seen`, etc. - Pre-skip leading whitespace. - Only look for G, M, T codes at the start of the command. - Verify that G, M, T codes are followed by command codes.	2015-05-18 07:06:51 -07:00
Ed Boston	a83bf18ee1	More functional seperation ... Moved SDCARDDETECTINVERTED and SDSLOW to Conditionals.h. Added U8GLIB_LM6059_AF to define display specific actions. Added reminder to compile in u8glib	2015-05-18 05:37:46 -07:00
AnHardt	97ca1b3f4d	Name magic value 20 to MAX_OVERSHOOT_PID_AUTOTUNE ... to make it better findable.	2015-05-18 14:15:29 +02:00
Scott Lahteine	0f2c9bacfd	M33 LONG_FILENAME_HOST_SUPPORT	2015-05-17 17:36:32 -07:00
Scott Lahteine	3feaef6526	Have G92 set the nozzle position on Delta and SCARA	2015-05-17 17:08:05 -07:00
Ed Boston	047e688e93	Changed ADAFRUIT_ST7565 to ELB_FULL_GRAPHIC_CONTROLLER ... Rename of define to avoid confusion between the controller and the display which had similar names.	2015-05-17 15:23:17 -07:00
Ed Boston	1999ac415c	Formatting Changes ... Fixes for some code formatting changes and commenting out the ADAFRUIT_ST7565 define that was left defined.	2015-05-17 13:39:24 -07:00
Ed Boston	41f8cdb3a6	ADAFRUIT_ST7565 ... Added support for new display type	2015-05-17 12:47:41 -07:00
wurstnase	21ff773832	rework out_bits	2015-05-17 14:33:09 +02:00
Scott Lahteine	6c27eaf864	Merge pull request #2101 from thinkyhead/code_style ... Code style and a dangling "else"	2015-05-17 03:39:08 -07:00
Scott Lahteine	d580a0d186	Use "+=" in plane rotation	2015-05-17 01:51:14 -07:00
Scott Lahteine	2f3a410cb0	Fix a potential hanging "else" bug	2015-05-17 01:50:30 -07:00
Scott Lahteine	b83e3f0905	Combine "Bed X: " strings	2015-05-17 01:49:52 -07:00
Scott Lahteine	7dfb8becdb	Adjust some names and types in Marlin_main.cpp	2015-05-17 01:48:51 -07:00
Scott Lahteine	c966aa26ff	Comments in Marlin_main.cpp	2015-05-17 01:47:53 -07:00
Scott Lahteine	c54a2ea042	Adjust spacing in Marlin_main.cpp and stepper.*	2015-05-17 01:47:02 -07:00
Scott Lahteine	072625ccad	Update headings in Marlin_main.cpp and stepper.cpp	2015-05-17 01:44:53 -07:00
Scott Lahteine	16032f149f	Rename to codenum as a consistency	2015-05-16 23:17:35 -07:00
Scott Lahteine	273a4a253f	Merge pull request #2096 from thinkyhead/cherry_picking3 ... Hide M117 with no LCD	2015-05-16 21:10:28 -07:00
Scott Lahteine	64825a3d1e	Merge pull request #2095 from thinkyhead/cherry_picking2 ... Add gcode_line_error to reduce code size	2015-05-16 21:09:15 -07:00
Scott Lahteine	ca79282eaf	Hide M117 with no LCD	2015-05-16 20:59:04 -07:00
Scott Lahteine	ce218cafdb	Add gcode_line_error to reduce code size	2015-05-16 20:54:58 -07:00
Scott Lahteine	46d59784ad	Rename preocess_command to process_next_command	2015-05-16 20:47:40 -07:00
Scott Lahteine	513077c317	Minor change to fan kick	2015-05-16 19:42:28 -07:00
Scott Lahteine	76438195f0	NO_TIMEOUTS and ADVANCED_OK off by default	2015-05-16 02:47:20 -07:00
Scott Lahteine	d2563804c8	Add LF to file errors	2015-05-15 04:37:22 -07:00
Scott Lahteine	e114662cfa	Adjust SdBaseFile spacing	2015-05-15 03:23:49 -07:00
Scott Lahteine	98e91f5253	Allow lsDive to recurse with minimal stack usage	2015-05-15 03:19:07 -07:00
Scott Lahteine	19166a92e4	Merge pull request #2057 from Wurstnase/serial_wait ... add plan buffer remaining for 'P' and block buffer remaining 'B'	2015-05-14 04:57:08 -07:00
Scott Lahteine	95f5a68006	Merge pull request #2074 from thinkyhead/lcd_xyz_unknown ... Display unknown XYZ on the LCD as "---"	2015-05-14 04:56:38 -07:00
Scott Lahteine	e97fcafd0e	Merge pull request #2076 from thinkyhead/mendel_inverting ... Use MSG_OK in M105	2015-05-14 04:54:11 -07:00
Scott Lahteine	0f6cd3640b	Drop extraneous ok_to_send	2015-05-14 04:38:09 -07:00
Scott Lahteine	0ce355d9e7	Use MSG_OK in M105	2015-05-14 03:33:38 -07:00
Scott Lahteine	a366e57385	Merge pull request #2075 from thinkyhead/mendel_inverting ... Use Mendel default for INVERT_Y_DIR	2015-05-14 03:29:24 -07:00
Scott Lahteine	7b3acfbb6f	Merge pull request #2072 from thinkyhead/better_arc_code ... Consolidate arc code, remove motion_control.*	2015-05-14 00:27:22 -07:00
Scott Lahteine	78beef2d73	Use Mendel default for INVERT_Y_DIR	2015-05-14 00:25:47 -07:00
Scott Lahteine	1a4a09c26f	Display unknown XYZ on the LCD as "---" ... - Also show 2 digits past decimal for Z on DOGM	2015-05-13 22:45:58 -07:00
Scott Lahteine	68ce419147	Note on segment size	2015-05-13 19:11:36 -07:00
Scott Lahteine	8b92249f18	Bring arc_offset into auto scope	2015-05-13 19:00:46 -07:00
Scott Lahteine	80807b2d71	Consolidate arc code, remove motion_control.*	2015-05-13 18:52:41 -07:00
Scott Lahteine	f65833931d	Formatting tweaks	2015-05-13 02:02:19 -07:00
Scott Lahteine	fcfd99c1ae	Add comments to lcd_control_temperature_menu	2015-05-12 18:46:16 -07:00
Scott Lahteine	d693e0f378	Use WATCH_TEMP_INCREASE + TEMP_HYSTERESIS + 1 as difference limit	2015-05-12 18:30:38 -07:00
Scott Lahteine	6697a8f375	Watch the heater a little longer	2015-05-12 18:22:47 -07:00
Scott Lahteine	5693a6e3c9	Fix heating error message	2015-05-12 18:17:13 -07:00
Scott Lahteine	747fd5801c	Merge pull request #2055 from thinkyhead/thermal_unified ... Combine thermal runaway and watch-period	2015-05-12 08:04:29 -07:00
Scott Lahteine	6e5572228d	Merge pull request #2064 from thinkyhead/wait_before_g28 ... Split up prepare_move by type	2015-05-12 07:53:11 -07:00
Scott Lahteine	27ad381e25	Allow fractional seconds in G4 and M0	2015-05-12 07:52:08 -07:00
Scott Lahteine	5146694452	Merge pull request #1884 from shaggythesheep/feature_new_board_ramps_cnc_controller ... Feature: Add RAMPS CNC Controller Board	2015-05-12 04:31:49 -07:00
Scott Lahteine	b2bd9aae7c	SCARA_SEGMENTS_PER_SECOND	2015-05-12 04:18:15 -07:00
Scott Lahteine	bd20bd5444	Merge pull request #2063 from chris-bo/autobed_sled ... improve sled handling	2015-05-12 03:29:21 -07:00
Scott Lahteine	9e95ceb3fc	Split up prepare_move by type ... - For better encapsulation add inlines for each prepare_move type - Move controllerFan vars inside the function as statics - Some formatting cleanup - Rename `ClearToSend` as `ok_to_send`	2015-05-12 02:08:20 -07:00
Scott Lahteine	9ba8cf5fe3	Merge pull request #2061 from thinkyhead/wait_before_g28 ... Always do st_synchronize() before G28	2015-05-12 02:05:30 -07:00
Scott Lahteine	873f7d6f2a	Check that configs are up-to-date	2015-05-12 01:33:51 -07:00
Christian Bohn	f48599f172	add pin definition to some motherboards	2015-05-12 10:02:23 +02:00
Scott Lahteine	b5200e184c	Remove extra setup_for_endstop_move	2015-05-12 01:01:53 -07:00
Scott Lahteine	8d814de558	Return void in prevent_dangerous_extrude	2015-05-12 00:55:00 -07:00
Scott Lahteine	367e2eb9f4	Global setup_for_endstop_move	2015-05-12 00:51:22 -07:00
Wurstnase	1d5677cc3b	add missing Z-bits	2015-05-12 09:36:19 +02:00
Wurstnase	df12e68e7d	add missing Z_PROBE-bit	2015-05-12 09:33:24 +02:00
Scott Lahteine	fa951f8a0b	Always do st_synchronize() before G28	2015-05-12 00:31:51 -07:00
Christian Bohn	27a3b1d895	disable sled pin by default	2015-05-12 08:51:01 +02:00
Christian Bohn	fb44b53ae3	sled improvements ... - create sled pin definition - G28 Works with sled	2015-05-11 23:22:19 +02:00
Wurstnase	46d1932380	add plan buffer remaining for 'P' and block buffer remaining 'B'	2015-05-11 13:04:00 +02:00
Scott Lahteine	429c6ccad2	Neaten config formatting	2015-05-10 23:27:00 -07:00
Scott Lahteine	8a0dc4d54a	Merge pull request #1922 from Wurstnase/serial_wait ... Serial wait	2015-05-10 23:10:25 -07:00
Scott Lahteine	8332a15899	Fix testing of runaway options in temperature.cpp	2015-05-10 23:03:24 -07:00
Wurstnase	526ad82d20	activate advanced_ok and no_timeout	2015-05-11 08:01:51 +02:00
Scott Lahteine	2b92b01afc	Fix typo in SanityCheck.h	2015-05-10 22:58:37 -07:00
Scott Lahteine	2445ae3d3a	Combine thermal runaway and watch-period ... - Make thermal protection for all hotends and/or bed into simple switches - Now enable `WATCH_TEMP_PERIOD` when `THERMAL_PROTECTION_HOTENDS` is enabled - Move detailed thermal parameters to `Configuration_adv.h` - Add sanity checks to warn about old configurations - Change `WATCH_TEMP_PERIOD` to seconds instead of milliseconds	2015-05-10 22:52:01 -07:00
Scott Lahteine	4097207c75	Merge pull request #2041 from thinkyhead/watch_temp ... More thermal protection	2015-05-10 21:39:05 -07:00
Scott Lahteine	45d64040fe	Merge pull request #2048 from Wurstnase/hit_bits ... replace some bools	2015-05-10 20:37:17 -07:00
Scott Lahteine	9b3d4380d3	Only watch the heater that was set	2015-05-10 20:26:45 -07:00
Scott Lahteine	52c0696e44	Merge pull request #2044 from thinkyhead/fix_servos_too ... Make some z probe and servo code tweaks	2015-05-10 20:10:42 -07:00
Wurstnase	b55f32f8a1	replace some bools ... this PR replaces some bools with one char. this will safe 3 bytes and should also be sometimes a little bit faster.	2015-05-10 21:37:39 +02:00
Laurent DELAGE	e70e6e2b48	Correction traductions	2015-05-10 15:38:50 +02:00
Scott Lahteine	f73f4ce555	Make some z probe and servo code tweaks	2015-05-09 19:11:19 -07:00
Scott Lahteine	28c87ec81b	Disable all heaters on temp error	2015-05-08 23:17:25 -07:00
Scott Lahteine	79106638a8	Fix documentation of heating sanity check	2015-05-08 22:50:08 -07:00
Scott Lahteine	6110494a56	Change default to 4°C in 16s	2015-05-08 22:41:12 -07:00
Scott Lahteine	54deb9eea3	Enable WATCH_TEMP_PERIOD by default	2015-05-08 22:36:02 -07:00
Scott Lahteine	deedb00c18	Document WATCH_TEMP_PERIOD	2015-05-08 22:25:51 -07:00
Scott Lahteine	be77cfd895	Merge pull request #2032 from Wurstnase/toshiba_for_all_stepper ... We don't need the old standard one. The STEP_ADD and STEP_IF_COUNTER …	2015-05-08 20:32:30 -07:00
Scott Lahteine	cb4ea75fab	Support for MKS BASE 1.0 board	2015-05-08 19:07:37 -07:00
Scott Lahteine	0e70511381	Merge pull request #2036 from brupje/mainline ... Fixes for reprapworld's keypad	2015-05-08 18:19:31 -07:00
Wurstnase	0cb87795a3	advanced 'ok' ... ok N(linenumber) P(bufferremaining) the host can use this to send the data much faster. Some pseudo code: If (bufferremaining > 0) send command ## as long there is free buffer send command Also if (linenumber > lastsend - bufferremaining) send command ## as long last linenumber received is bigger than lastsend (host) - last bufferremaining received	2015-05-08 22:28:51 +02:00
Wurstnase	182e0d99c9	Merge remote-tracking branch 'Marlin8bit/Development' into serial_wait	2015-05-08 21:27:18 +02:00
brupje	d1148a0198	Rename Configuration_megatronics.h to Configuration.h	2015-05-08 14:36:23 +02:00
Scott Lahteine	7f3252eea9	Merge pull request #1999 from paclema/Filrunout_configurable_script ... Added configurable script for filrunout from configuration.h	2015-05-08 04:39:59 -07:00
Scott Lahteine	181ccc884c	Edit thermal runaway description	2015-05-07 20:46:03 -07:00
Wurstnase	073e4af7e2	We don't need the old standard one. The STEP_ADD and STEP_IF_COUNTER are also good for non-Toshiba stepper driver.	2015-05-07 18:55:47 +02:00
brupje	b7fcb11580	Added example configuration for Megatronics	2015-05-07 13:18:05 +02:00
brupje	8f8174dc93	Revert "Default configuration for megatronics." ... This reverts commit 22e0d2afcb.	2015-05-07 13:12:17 +02:00
Scott Lahteine	79633a74ab	Fix MBL compile error	2015-05-06 14:25:13 -07:00
brupje	ba9741139e	Clean up pins file for megatronics	2015-05-05 14:01:52 +02:00
brupje	22e0d2afcb	Default configuration for megatronics.	2015-05-05 14:01:20 +02:00
brupje	816aa19861	Up/down buttons were reversed, swapped the assignments	2015-05-05 13:04:46 +02:00
brupje	df4d50579a	This is conflicting with the settings in ultralcd.h. Not sure why it' s redefined here anyway.	2015-05-05 12:47:24 +02:00
brupje	8f8bf3a897	Make Marlin actually compile when #define REPRAPWORLD_KEYPAD is uncommented	2015-05-05 11:03:20 +02:00
Scott Lahteine	777f2d3820	Merge pull request #2018 from fmalpartida/bugFixing ... Bug corrected: persistent HOMING message when HOME button pressed for homing.	2015-05-05 00:12:32 -07:00
Scott Lahteine	ecb46de349	Merge pull request #2013 from bq/Fix_lowercase ... Fixed lowercase change missing on commit a22a228b.	2015-05-04 23:50:56 -07:00
fmalpartida	150a35eff8	Bug corrected: ... Persistent homing message. Message was declared as an alert, therefore it was persistent. Updated to message.	2015-05-04 19:48:49 +02:00
Gina Häußge	ab246ab032	Reverting changes to error messages on serial console ... This reverts the changes done to the error message for line number mismatches done in commit d43cc2dd5f	2015-05-04 15:03:00 +02:00
Ivan Galvez Junquera	59529b755d	Fixed lowercase change missing on commit a22a228b. ... Servo.cpp and Servo.h were changed to lowercase in Makefile but not their actual filenames.	2015-05-04 09:44:34 +02:00
Scott Lahteine	df4c104637	Merge pull request #2012 from BrianGilbert/Development ... Add example configuration for Boots Industries V2.5 Delta Printer	2015-05-03 20:42:32 -07:00
Scott Lahteine	1f039cde61	Merge pull request #1992 from thinkyhead/too_many_probes ... Stow Z probe on M402 without extra raise	2015-05-03 20:40:26 -07:00
Brian Gilbert	1285784a49	Add Boots Industries V2.5 example configuration	2015-05-04 09:10:42 +10:00
Scott Lahteine	35493e1af9	Tweak to planner.cpp position.debug	2015-05-03 16:03:05 -07:00
paclema	26015b02d8	Fixed typo and updated Configuration.h of configurator	2015-05-03 02:39:34 +02:00
paclema	aedd580911	Updated all configuration.h examples	2015-05-03 02:28:43 +02:00
Scott Lahteine	2c892fca6a	Cleanup of language.h	2015-05-01 21:38:32 -07:00
Scott Lahteine	2db384a21d	Fix compile error in configuration_store.cpp	2015-05-01 21:15:26 -07:00
Scott Lahteine	ca8cec8e8a	Merge pull request #1998 from paclema/Filament_runout_fix ... Fixed sintaxis error of filament runout	2015-04-29 19:53:25 -07:00
Scott Lahteine	425cd46c12	Merge pull request #1993 from AnHardt/TRP-bed ... Enable TRP for the bed	2015-04-29 19:44:50 -07:00
Scott Lahteine	d4c74b8f8c	Don't apply M428 if an error occurs ... - Also move audio feedback into the command - Added shorthand for `lcd_buzz` availability	2015-04-29 19:05:48 -07:00
Scott Lahteine	d065d37822	Add M428 to set home_offset logically	2015-04-29 18:26:16 -07:00
paclema	013a09dbe6	Added configurable script for filrunout form configuration.h	2015-04-29 21:38:40 +02:00
paclema	4dcc0fd55a	Fixed sintaxis error of filament runout	2015-04-29 21:32:27 +02:00
AnHardt	514d8ac460	Enable TRP for the bed ... in all Configurations.	2015-04-29 08:47:01 +02:00
Scott Lahteine	ce3caf447b	Tweak how homeaxis deploys and stows	2015-04-28 19:17:48 -07:00
Scott Lahteine	a235dca79c	Stow z on M402 without extra raise	2015-04-28 19:10:07 -07:00
Scott Lahteine	2610b8d047	Enable thermal runaway protection by default	2015-04-28 17:40:29 -07:00
AnHardt	b4b19a6cbd	Merge https://github.com/MarlinFirmware/Marlin into Bulgarian ... Conflicts: Marlin/Configuration.h Marlin/configurator/config/Configuration.h Marlin/example_configurations/Felix/Configuration.h Marlin/example_configurations/Felix/Configuration_DUAL.h Marlin/example_configurations/Hephestos/Configuration.h Marlin/example_configurations/K8200/Configuration.h Marlin/example_configurations/SCARA/Configuration.h Marlin/example_configurations/WITBOX/Configuration.h Marlin/example_configurations/delta/generic/Configuration.h Marlin/example_configurations/delta/kossel_mini/Configuration.h Marlin/example_configurations/makibox/Configuration.h Marlin/example_configurations/tvrrug/Round2/Configuration.h Conflicts with my Chinese implementation resolved.	2015-04-28 09:24:32 +02:00
Scott Lahteine	7548a56f64	Merge pull request #1886 from ex-nerd/pins_BRAINWAVE_PRO ... Add pin configuration for Brainwave Pro	2015-04-27 23:13:26 -07:00
Scott Lahteine	02acf0641a	Merge pull request #1983 from CONSULitAS/Development_Update_language_de.h ... language_de.h: updated translation and minor typos	2015-04-27 22:45:24 -07:00
Scott Lahteine	a120bf3fe4	Latest upstream commits	2015-04-27 22:40:19 -07:00
Scott Lahteine	3688256f86	Merge pull request #1974 from thinkyhead/eeprom_in_gcode ... Make EEPROM reproducible in GCode	2015-04-27 22:35:41 -07:00
Scott Lahteine	ae53b3cdc3	Fix the M303 S-1 report text	2015-04-27 22:25:00 -07:00
Scott Lahteine	c1fbef1722	Merge pull request #1988 from thinkyhead/bye_string_url ... Remove obsolete STRING_URL	2015-04-27 22:12:05 -07:00
Scott Lahteine	31516e2a3b	Merge pull request #1985 from Arengorn/Development ... Update of servo.h	2015-04-27 22:10:02 -07:00
Scott Lahteine	185f8a0a66	Merge pull request #1917 from CONSULitAS/Development_Update_K8200_Config ... Example Configuration for K8200: comments/URL/readme	2015-04-27 21:59:56 -07:00
Scott Lahteine	0970102950	Remove obsolete STRING_URL	2015-04-27 21:59:14 -07:00
Scott Lahteine	0f687b5dda	Merge branch 'Development' into eeprom_in_gcode ... Latest upstream commits	2015-04-27 21:47:47 -07:00
Scott Lahteine	28aef684b4	Merge pull request #1957 from Voxel8/sjk/home_y_before_x ... Allow Y to home before X with option in Configuration_adv.h.	2015-04-27 21:41:14 -07:00
Scott Lahteine	c1dd9bda7f	Merge pull request #1987 from thinkyhead/fix_homing_zpos ... Disable endstops between homing bumps	2015-04-27 21:16:47 -07:00
Scott Lahteine	71a0b1a5bb	Disable endstops between homing bumps	2015-04-27 21:14:30 -07:00
Scott Lahteine	8c28e36e75	Merge pull request #1986 from thinkyhead/fix_homing_zpos ... Fix homing Z position	2015-04-27 20:58:14 -07:00
Scott Lahteine	c36226c4dc	Fix homing Z position ... Add `sync_plan_position()` after `axis_is_at_home(axis)` to keep the planner position in sync when homing.	2015-04-27 20:55:19 -07:00
Scott Lahteine	2bc1d70a31	Merge pull request #1977 from AnHardt/Cinese2 ... We mark this historic day, when Marlin went to China.	2015-04-27 20:37:00 -07:00
Scott Lahteine	ff178d8cf7	Change M421 to take coordinates ... This makes `M421` more amenable for irregular matrices	2015-04-27 19:48:34 -07:00
Bernardo	e449659338	Update Servo.cpp ... Updated "servo.h" to "Servo.h"	2015-04-27 23:30:11 -03:00
Bernardo	ff67ee73fc	Update Marlin_main.cpp ... Corrected "servo.h" to "Servo.h" because of the updated filename.	2015-04-27 23:29:16 -03:00
Scott Lahteine	5b248757c7	Level Bed in Prepare submenu ... - Add “Level Bed” menu item for auto bed leveling - Hide the option if homing has not been done yet - Arrange the Prepare submenu more logically (?) - Add documentation comments, some white-space - Apply some coding standards here and there - Move old encoder multiplier debug option to `ultralcd.cpp`	2015-04-27 19:11:25 -07:00
CONSULitAS	c5dfb35597	language_de.h: updated translation and minor typos ... language_de.h: updated translation and minor typos	2015-04-28 01:03:54 +02:00
CONSULitAS	6423fe7601	language.h: update documentation / URL für K8200 ... language.h: update documentation for LANGUAGE_INCLUDE language.h: URL für K8200 github repository	2015-04-28 01:01:57 +02:00
CONSULitAS	6af40e9dc0	K8200 example Configuration.h: STRING_URL removed ... K8200 example Configuration.h: * STRING_URL removed: like proposed by thinkyhead in #1917	2015-04-27 23:59:10 +02:00
CONSULitAS	d1c1f766d5	Merge remote-tracking branch 'upstream/Development' into K8200_2015-04-23_TEST ... Conflicts: Marlin/example_configurations/K8200/Configuration.h	2015-04-27 23:54:47 +02:00
Steve Kelly	98ca46006c	Allow Y to home before X with option in Configuration_adv.h. ... This addresses comments in #1956 and #1079. In particular, this is useful when both endstops are stationary on a CoreXY system, and the Y axis needs to be homed before the X so the flags are aligned.	2015-04-27 16:17:30 -04:00
AnHardt	6cba6bcd82	Add 'cn' to the other 'Configuration.h's	2015-04-27 13:24:51 +02:00
AnHardt	1d9699be0f	Add some doku	2015-04-27 13:16:20 +02:00
AnHardt	76b12edecf	Give TALL_FONT_CORRECTION a default	2015-04-27 12:47:11 +02:00
AnHardt	6b1b71837c	Intit. commit for Chinese ... Edited the European part of 'ISO10646_CN.fon' to match the existing fonts. Added Chinese font to make_fonts.bat Created 'dogm_font_data_ISO10646_CN.h' Added Chinese to 'language.h' Added 'language_cn.h' with some minor edits. Added Chinese font in 'language_en.h' to not fall back to European font. Added cn to 'Configuration.h' Changed WIDTH to LCD_PIXEL_WIDTH and HEIGHT to LCD_PIXEL_HEIGHT to have more descriptive names. In 'dogm_lcd_implementation.h' Added Chinese Font Made 1 pixel more room for the larger Chinese font on the status line. Changed geometry of the 'select bar' by one pixel. Changed the way the position for values and postcars are set.	2015-04-27 12:15:36 +02:00
Scott Lahteine	fb379384ee	Reduce MBL eeprom read code	2015-04-26 21:06:04 -07:00
Scott Lahteine	0fca084ea6	Make EEPROM reproducible in GCode ... With these changes the output of `M503 S0` is all you need to restore the EEPROM. Building on this it is straightforward to save and restore the EEPROM state using the SD card or external GCode file. - Added `M145` to set “heatup states” for the LCD menu - Added `M420` to toggle Mesh Bed Leveling - Added `M421` to set a single Mesh coordinate - Extended `Config_PrintSettings` with added M codes - Cleaned up some comments here and there	2015-04-26 20:56:33 -07:00
Scott Lahteine	d43cc2dd5f	M111 - Debug Level ... - Add `M111` as a standard option to set the debug level - Implement `DEBUG_ECHO` in `process_commands` - Other debug levels (e.g., `DEBUG_DRYRUN`) need more work	2015-04-26 20:08:45 -07:00
Scott Lahteine	0ec444720f	Rename blinkm files	2015-04-25 21:06:19 -07:00
Scott Lahteine	a22a228bcc	Rename files to move them in the IDE	2015-04-25 21:04:54 -07:00
Scott Lahteine	a932e7490f	No noTone needed, but delay is	2015-04-25 03:25:30 -07:00
Scott Lahteine	9c5d14ea68	Fix BEEPER duration	2015-04-25 03:12:49 -07:00
Scott Lahteine	5c29fda167	Add a warning for DISABLE_[XYZ] options	2015-04-25 00:46:33 -07:00
Scott Lahteine	0438f0d835	Merge pull request #1924 from thinkyhead/raise_z_for_m401_m402 ... Raise Z for M401 and M402	2015-04-24 22:41:12 -07:00
Scott Lahteine	a640cad139	Merge pull request #1967 from thinkyhead/g4_dwell_message ... Use millis_t for progress_bar_ms and expire_status_ms	2015-04-24 22:17:28 -07:00
Scott Lahteine	c92b59952a	Use millis_t for progress_bar_ms and expire_status_ms	2015-04-24 22:16:09 -07:00
Scott Lahteine	b275946a52	Merge pull request #1966 from thinkyhead/g4_dwell_message ... G4 shows status message only if no message is set already	2015-04-24 22:02:37 -07:00
Scott Lahteine	97dfa0365d	Rename expireStatusMillis to expire_status_ms	2015-04-24 21:51:10 -07:00
Scott Lahteine	7295640f44	Remove extraneous ;	2015-04-24 21:37:27 -07:00
Scott Lahteine	0d8c00d3f6	Define lcd_hasstatus for no lcd also	2015-04-24 21:36:04 -07:00
Scott Lahteine	182f2cda35	Minor cleanup of M48	2015-04-24 21:26:36 -07:00
Scott Lahteine	3a6fd912cd	Latest upstream commits, merged	2015-04-24 21:14:13 -07:00
Scott Lahteine	3c9e94e035	Merge pull request #1964 from AnHardt/Max6675again ... Add variant for MAX6675 in M104	2015-04-24 20:44:45 -07:00
Scott Lahteine	56ff46eb8b	Improve code_has_value test	2015-04-24 20:43:16 -07:00
Scott Lahteine	ce142afdda	G4 shows status message only if no message is set already ... - Address issue raised in #1961	2015-04-24 20:13:01 -07:00
Scott Lahteine	35e79d56a5	Remove set-coordinate extension of G28	2015-04-24 19:23:12 -07:00
Scott Lahteine	3a74bb5039	Merge pull request #1945 from Wurstnase/max_endstopp ... Max endstopp	2015-04-24 19:17:38 -07:00
AnHardt	0fed46360c	Add variant for MAX6675 in M104 ... Else will throw error: @:0 B@:0 Error:No thermistors - no temperature [ERROR] Error:No thermistors - no temperature when no bed is defined	2015-04-24 16:43:19 +02:00
Wurstnase	79a44a9de3	stepper.cpp macros rework ... delete some tabs	2015-04-24 08:03:17 +02:00
Scott Lahteine	588ed70d4a	Latest upstream commits, merged	2015-04-23 21:18:48 -07:00
Scott Lahteine	0165560333	Apply zprobe_zoffset in axis_is_at_home ... Ensure the probe offset will always be included when homing Z.	2015-04-23 21:12:38 -07:00
Scott Lahteine	075386e7fe	Merge pull request #1959 from thinkyhead/lcd_move_rate ... Include axis parameter to ultralcd's line_to_current	2015-04-23 21:06:57 -07:00
Scott Lahteine	2558c10c6c	Use the slower feedrate for XY axes	2015-04-23 20:06:17 -07:00
Scott Lahteine	31932912dd	Use AxisEnum instead of int for _lcd_move	2015-04-23 19:32:37 -07:00
Scott Lahteine	c2e11daf66	Merge pull request #1958 from thinkyhead/redo_1937 ... Fix homing of YZ with DUAL_X_CARRIAGE	2015-04-23 19:12:51 -07:00
Scott Lahteine	c3560e0288	Include axis parameter to ultralcd's line_to_current	2015-04-23 19:10:09 -07:00
Scott Lahteine	a0a5ff61c4	Merge pull request #1951 from AnHardt/Azteeg_x3 ... Fix for #1946	2015-04-23 18:40:00 -07:00
Scott Lahteine	0094481e55	Merge pull request #1955 from AnHardt/langlang ... Add DISPLAY_CHARSET_HD44780_CYRILLIC as alternative in SanityCheck.h	2015-04-23 18:36:06 -07:00
Scott Lahteine	64268f3312	Fixup axis_is_at_home a little	2015-04-23 18:16:44 -07:00
Scott Lahteine	996d0a9185	Squish the code down a little	2015-04-23 18:06:36 -07:00
Scott Lahteine	8534bc376c	Fix homing of YZ with DUAL_X_CARRIAGE	2015-04-23 17:56:37 -07:00
Scott Lahteine	3b97a7d446	Merge pull request #1944 from AnHardt/beep2 ... More Beeper clean up	2015-04-23 17:50:02 -07:00
Wurstnase	be9e4ceddc	fix typo ... c'n'p ftw :/	2015-04-23 10:35:14 +02:00
unknown	c26d816839	filter any 0	2015-04-22 12:09:57 +02:00
AnHardt	f2c94b3298	tone will end automaticly	2015-04-22 01:49:55 +02:00
AnHardt	c5e0e29d23	Add DISPLAY_CHARSET_HD44780_CYRILLIC as alternative in SanityCheck.h ... and add some documentation - how to integrate a new font.	2015-04-21 21:42:00 +02:00
AnHardt	b59e92ab99	Fix for #1946 ... Syntax error.	2015-04-21 13:50:28 +02:00
Wurstnase	61ae43f35e	v <-> code_value	2015-04-20 23:31:10 +02:00
Wurstnase	da0d91a79b	max endstopp ... no user will home to 0 with a max endstopp	2015-04-20 23:28:46 +02:00
AnHardt	3a27a78f9e	Commented REPRAP_DISCOUNT_SMART_CONTROLLER again ... and removed some tabs.	2015-04-20 15:01:43 +02:00
AnHardt	064f2b37d0	More Beeper clean up. ... Centralised beep code to lcd_buzz(). From gcode_M300() and lcd_quick_feedback(). Enforced max. duration for M300 to 5 seconds. Corrected description in 'Configuration.h' LCD_FEEDBACK_FREQUENCY_HZ 0 gives now a silent delay of LCD_FEEDBACK_FREQUENCY_DURATION_MS.	2015-04-20 11:11:13 +02:00
Wurstnase	92575cecca	new timout/add adv_ok	2015-04-20 00:22:40 +02:00
AnHardt	671aaf2dc9	Minor fix for M300 ... Corrected wrong order of parameters.	2015-04-19 13:25:20 +02:00
Scott Lahteine	d931220a65	Tweak comments	2015-04-18 23:12:29 -07:00
Scott Lahteine	47847765e2	Add M410 QuickStop command	2015-04-18 23:07:48 -07:00
Scott Lahteine	a4ca87ba99	Merge pull request #1933 from bq/Fix_stray_in_configuration ... Fixed compilation error "error: stray ‘\357’ in program"	2015-04-18 03:56:31 -07:00
Scott Lahteine	5e3bb4bdf3	Merge pull request #1931 from paclema/M303_echo ... Added new PID autotune info, to make easy copy & paste results to marlin	2015-04-18 03:49:31 -07:00
Ivan Galvez Junquera	b99e63a7bf	Fixed compilation error "error: stray ‘\357’ in program" in several configuration files. ... Introduced in commit 697ee2dc and later spread to other files.	2015-04-17 16:10:58 +02:00
paclema	581685a231	Added new PID autotune info, to make easy copy & paste results to marlin	2015-04-17 11:15:09 +02:00
Chris Palmer	483384aaa4	Fixed faulty comment merge	2015-04-17 09:31:53 +01:00
Chris Palmer	cc6b7cf3ce	Fixed some comment spellings.	2015-04-17 09:28:08 +01:00
Chris Palmer	e4595fa24a	Fixed jump in speed when using high accelerations on axes with lots of steps. ... I.e., when acceleration * steps per mm > 2,000,000. This was done by changing MultiU24X24toH16 to take a 32b bit operand. Removed the claim that stepper.cpp uses the Leib algorithm.	2015-04-16 23:04:38 +01:00
Wurstnase	b09a957fce	make 'wait' optional and mark as workaround	2015-04-16 21:42:54 +02:00
Scott Lahteine	63b98b8280	Raise Z for M401 and M402	2015-04-16 07:24:33 -07:00
wurstnase	d69da22f7c	last_command_time inside get_command()	2015-04-16 16:20:23 +02:00
Scott Lahteine	53be0f3399	Babystep delay 2us	2015-04-16 04:16:36 -07:00
wurstnase	574e2d856e	remove config	2015-04-16 13:07:20 +02:00
paclema	cde5eee2a5	Removed unnecessary comments	2015-04-15 19:01:09 +02:00
paclema	e1b69db6d1	Fixed M48 mismatch between n and P parameter on documentation	2015-04-15 18:17:58 +02:00
CONSULitAS	1de9b568db	Example Configuration for K8200: comments/URL/readme ... Example Configuration for K8200 : comments/URL/readme example_configurations\K8200\Configuration.h: * add machine specific header * change STRING_URL to K8200 fork (@thinkyhead: What do you think?) example_configurations\K8200\readme.md: * updated documentation * added URLs and links	2015-04-15 10:02:13 +02:00
CONSULitAS	0af5e3a04f	Example Configuration for K8200: comments/URL/readme ... Example Configuration for K8200 : comments/URL/readme example_configurations\K8200\Configuration.h: * add machine specific header * change STRING_URL to K8200 fork (@thinkyhead: What do you think?) example_configurations\K8200\readme.md: * updated documentation * added URLs and links	2015-04-15 10:00:41 +02:00
Scott Lahteine	637babb99b	Merge pull request #1915 from elgambitero/Development ... Some minor translations to spanish	2015-04-14 19:59:39 -07:00
elgambitero	cb9ac490d4	Some minor translations to spanish	2015-04-14 23:14:52 +02:00
CONSULitAS	3851ac6226	Example Configuration for K8200 back in sync ... example_configurations\K8200\Configuration.h: * merge upstream changes from default Configuration.h manually * add some machine specific comments	2015-04-14 17:12:42 +02:00
CONSULitAS	b447a4ffab	Merge remote-tracking branch 'upstream/Development' into Development	2015-04-14 15:35:08 +02:00
Scott Lahteine	7336e6df07	Always define old_z, not always z2	2015-04-14 04:55:20 -07:00
Scott Lahteine	5dd87d2e74	Enable all old_z_*_endstop vars for Z_DUAL_ENDSTOPS ... - Potentially addressing #1911	2015-04-14 04:05:51 -07:00
Scott Lahteine	3f02da646c	Make sure axis_active is cleared for #1908	2015-04-14 03:41:37 -07:00
Scott Lahteine	e0e68c5cbc	Rename servos[] array in Marlin to servo[]	2015-04-14 03:13:25 -07:00
Chris Petersen	ffaf1b4f22	Add pin configuration for Brainwave Pro ... Copied from jcrocholl's contributions to the OpenBeamUSA Marlin fork	2015-04-13 23:46:57 -07:00
Scott Lahteine	642f6a92bc	fix type of code_has_value	2015-04-13 18:02:17 -07:00
Scott Lahteine	17ad80c1e1	Spacing in XYZ_CONSTS	2015-04-13 17:58:47 -07:00
Scott Lahteine	09d60e0128	Naming and code comments	2015-04-13 17:17:36 -07:00
Mehmet Sutas	5a9e45cc4a	Fix Syntax Error Filament Runout Statement	2015-04-13 22:37:18 +03:00
Scott Lahteine	257a907456	Fix typo in next_bed_check_ms	2015-04-12 23:17:28 -07:00
Scott Lahteine	e4b1e8651b	next_ vars faster than previous_ ... - Change some `previous_` time vars to `next_` so an add only happens at intervals - Fix `HEATER_0_USES_MAX6675` polling too frequently, or not at all	2015-04-12 23:06:50 -07:00
Scott Lahteine	ccddc280be	Apply three more commits	2015-04-12 22:47:44 -07:00
Scott Lahteine	74e4b42f7e	Default MACHINE_NAME to "3D Printer"	2015-04-12 17:17:41 -07:00
Scott Lahteine	8857b9e921	Use the extruder argument in plan_buffer_line	2015-04-12 16:57:00 -07:00
Scott Lahteine	ac2b23f574	Homing fixes ... - Prevent `Z_SAFE_HOMING` from homing Z twice in some cases - Allow `G28` with XYZ values of 0 to explicitly set the position - Don’t add `home_offset` when setting XYZ explicitly in `G28` - Add `code_has_value` function to check for the presence of a numeric value (could just test for space or nul to allow other types of values)	2015-04-11 20:06:48 -07:00
Scott Lahteine	055b11814a	Additional cleanup of ultralcd.cpp	2015-04-11 04:56:08 -07:00
Scott Lahteine	388dd0cfa5	Fix doubled lcd_quick_feedback ... - MENU_ITEM causes lcd_quick_feedback to be called, so only those calls to `lcd_goto_menu` outside of the `MENU_ITEM` macro need to set the `feedback` flag when calling `lcd_goto_menu`.	2015-04-11 04:45:04 -07:00
Scott Lahteine	c6bb98abad	machine name for hephestos too	2015-04-11 01:36:24 -07:00
Scott Lahteine	ccbe2c4ea3	Apply CUSTOM_MACHINE_NAME to configurations ... - Replace “Mendel” with “RepRap”	2015-04-10 21:29:42 -07:00
Scott Lahteine	5fe382949b	Some G-Codes comment cleanup	2015-04-10 16:16:13 -07:00
Scott Lahteine	8b16ebe705	Break out prevent_dangerous_extrude feature ... - It’s inline here, but could be a macro and duplicated for `planner.cpp`	2015-04-09 22:40:37 -07:00
Scott Lahteine	740152ee70	Merge branch 'Development' into cold_extrude ... Latest upstream commits	2015-04-09 20:23:47 -07:00
Scott Lahteine	5914d9d7de	Shuffling declarations..	2015-04-09 20:21:30 -07:00
Scott Lahteine	b328c6e6b6	Shuffling declarations.	2015-04-09 20:05:10 -07:00
Scott Lahteine	fb4cefc91d	Define lcd_move_[xyz] ahead of lcd_move_menu_axis	2015-04-09 19:33:16 -07:00
Richard Miles	4c3736ed43	Feature: Add RAMPS CNC Controller Board ... Created a new board to make using RAMPS as a CNC machine controller easier. It maps pin 8 to the spindle and pin 9 to the controller fan.	2015-04-09 16:32:56 +01:00
Scott Lahteine	9189cc66ab	Fix moves for DELTA for MANUAL_BED_LEVELING ... - Use `line_to_current` in place of `plan_buffer_line`	2015-04-09 04:32:14 -07:00
AnHardt	56fc3a4835	bgr -> bg ... + update in documentation	2015-04-09 13:09:18 +02:00
Scott Lahteine	7a1aef1450	Merge pull request #1877 from AnHardt/display-only ... Made encoderPosition and quick_feedback dependant on NEWPANEL	2015-04-09 03:54:05 -07:00
Scott Lahteine	6096164d79	Merge pull request #1878 from thinkyhead/cold_extrude ... Cold extrude	2015-04-09 03:41:54 -07:00
Scott Lahteine	a488445cbe	Fix spelling of "too"	2015-04-09 03:41:31 -07:00
Scott Lahteine	b1950a7f25	Merge pull request #1875 from Natealus/Development ... Z Probe inverting not present in example configs, causes error	2015-04-09 03:37:24 -07:00
AnHardt	df50523605	Made encoderPosition and quick_feedback dependant on NEWPANEL ... where the hardware is available. Fix for #1873	2015-04-09 12:26:45 +02:00
Scott Lahteine	2ca099d1e7	Merge pull request #1876 from thinkyhead/cold_extrude ... Catch dangerous extrude before trying several	2015-04-09 03:21:19 -07:00
Scott Lahteine	837ceb9abb	Merge pull request #1867 from epatel/Development ... Added sanity check for MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS	2015-04-09 02:29:47 -07:00
Scott Lahteine	a95544f92a	Spell adjustment	2015-04-09 02:04:06 -07:00
Scott Lahteine	a00ebf03d4	Merge pull request #1868 from AnHardt/LCD_STR ... Moved the definitions of the LCD_STR_* to Conditionals.h	2015-04-09 01:56:23 -07:00
Scott Lahteine	1269c445ab	Catch dangerous extrude before trying several	2015-04-09 01:40:48 -07:00
Natealus	585eee6549	Z Probe inverting not present in example configs, causes error ... The line const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop is in the main configuration.h but wasn't present in the example configuration.h's. Causes a compiling error with Z Probe enabled. Just added it to all the configs. :)	2015-04-08 18:57:30 -06:00
AnHardt	c5961892e3	Bulgarian for all the Configuration.h's	2015-04-09 01:52:13 +02:00
AnHardt	6248c93f37	Introduction of Bulgarian - language_bgr.h ... Thank you @Nprod!	2015-04-09 01:26:48 +02:00
AnHardt	540dbb35e2	And an other MSG_BED in Marlin_main.cpp	2015-04-09 01:16:06 +02:00
AnHardt	14d4419e16	Replaced SERIAL_PROTOCOLPGM(MSG_BED) with SERIAL_PROTOCOLPGM("Bed") ... Resolved some warnings in Marlin_main.cpp regarding compares of signed and unsigned integers by replacing 'int' or 'uint16_t' with 'uint8_t'.	2015-04-08 23:59:01 +02:00
AnHardt	ea897654a4	Moved the definitions of the LCD_STR_* to Conditionals.h ... to avoid errors in Marlin_main.cpp. #1860 In the include tree of Marlin_main.cpp the decision between the display types is not made. To include the right LCD_STR_* ether 'dogm_lcd_implementation.h' or 'ultralcd_implementation_hitachi_HD44780.h' with all their code. A 'dogm_lcd_implementation.h.h' would be a curiosity. So i moved both of the definition blocks to conditionals.h On the long term it could make sense to use the same numbering for the u8glib and the hitachi symbols.	2015-04-08 21:53:58 +02:00
Edward Patel	7dc64efe67	Added sanity check for MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS	2015-04-08 20:52:48 +02:00
AnHardt	6a514f3dc9	Aplied HAS_LCD_CONTRAST also to Marlin_main.cpp ... and cleaned typo.	2015-04-08 13:26:29 +02:00
AnHardt	a76fb42ca6	Merge https://github.com/MarlinFirmware/Marlin into contrast	2015-04-08 13:05:21 +02:00
AnHardt	bcc04192fc	Remove Contrast Menu for U8GLIB_ST7920 ... The other two devices we use in u8glib have more than only dummy code. Checked this in the library code.	2015-04-08 12:56:38 +02:00
Scott Lahteine	4788b59300	Thermistor values for configurator	2015-04-08 03:12:21 -07:00
Scott Lahteine	bb917ecda8	Merge pull request #1853 from thinkyhead/dev_version ... Set version to "1.0.3 dev"	2015-04-08 01:57:51 -07:00
Scott Lahteine	caa7734402	Merge pull request #1864 from thinkyhead/is_running ... IsStopped / IsRunning inline	2015-04-08 01:10:36 -07:00
Scott Lahteine	3162971cd6	current_position not static	2015-04-08 01:05:39 -07:00
Scott Lahteine	27cb90da8b	IsStopped / IsRunning inline	2015-04-08 00:56:19 -07:00
Max	07fc2b5b70	Update language_ru.h	2015-04-08 13:18:45 +06:00
Scott Lahteine	756bb5e268	Cleanup formatting in hitachi & dogm lcd	2015-04-07 22:04:10 -07:00
Scott Lahteine	7431ef7e2d	Merge branch 'Development' into dev_version ... Latest upstream commits	2015-04-07 21:14:00 -07:00
Scott Lahteine	43773ff735	Formatting and lcd contrast masking	2015-04-07 21:11:03 -07:00
Scott Lahteine	eb6e3886f4	Set version to "1.0.3 dev"	2015-04-07 20:38:43 -07:00
Scott Lahteine	cf9b58452c	Minimum delay in menu click feedback ... Squished #1849	2015-04-07 20:20:30 -07:00
Scott Lahteine	1d291be2ba	Fix de after PREVENT_DANGEROUS_EXTRUDE ... - Set `de` to 0 when `position[E] = target[E]` - Address regression mention in #1846	2015-04-07 20:01:08 -07:00
Scott Lahteine	e03da4805b	Merge pull request #1774 from epatel/Development ... Mesh bed leveling: Added G29 S3 + finer display steps during manual input + bug fix	2015-04-07 19:24:46 -07:00
Scott Lahteine	f7c4e7e19f	Fix G29 not deploying in some instances	2015-04-07 15:38:29 -07:00
Edward Patel	a9ed39b12d	Moved checks into SanityCheck.h + removed previous added checks.	2015-04-07 22:58:08 +02:00
Edward Patel	002340f32c	Merge branch 'Development-Marlin' into Development	2015-04-07 22:49:12 +02:00
Scott Lahteine	c379f17117	Encapsulate setting of homing_bump_feedrate	2015-04-06 23:21:33 -07:00
Scott Lahteine	7d2c2f1790	Updates for the configurator ... - Sections in all `Configuration_adv.h` - Recognize JAPANESE/WESTERN/CYRILLIC options - Better capturing of comments for tooltips	2015-04-06 23:16:01 -07:00
Scott Lahteine	967db181d0	Latest upstream commits	2015-04-06 21:46:18 -07:00
Scott Lahteine	e502144eda	Fixup formatting of last commit	2015-04-06 21:28:14 -07:00
Scott Lahteine	d05efa008d	Merge pull request #1825 from shaggythesheep/bugfix_no_heaters ... Bugfix: Temperature checks when no heaters in use	2015-04-06 21:25:22 -07:00
Scott Lahteine	d20f42c883	Don't stow the probe until the last grid point! ... - Address Issue #1682 at hash #issuecomment-89756858	2015-04-06 20:58:09 -07:00
Scott Lahteine	5c2bb05af3	Merge pull request #1839 from AnHardt/fix-statusmessage ... Fix lcd_status_message	2015-04-06 19:08:25 -07:00
Scott Lahteine	d70a4a3847	Merge pull request #1823 from AnHardt/splashscreen ... Disable splash-screen when done once	2015-04-06 18:48:48 -07:00
Scott Lahteine	56aea5f8e5	Merge pull request #1829 from Natealus/Development ... Azteeg X3 Pro Pin fix ups	2015-04-06 18:19:33 -07:00
Scott Lahteine	6a860b99dc	Merge pull request #1828 from Wackerbarth/Configurator ... Update Configurator Files	2015-04-06 18:09:26 -07:00
AnHardt	ac843fbf3b	Fix lcd_status_message ... Because we now can use utf8 with up to 3 bytes per symbol, lcd_status_message[] must be 3*LCD_WIDTH wide. Filling up the message, or cutting to length, are fixed to. Fix for #1832 about at the end.	2015-04-07 02:33:34 +02:00
Scott Lahteine	6d084c017f	Fix typo in FWRETRACT handler ... Should be `retracting` and not `retract`	2015-04-06 17:04:22 -07:00
Edward Patel	d27c82a450	Added check for Delta printers in Mesh, #error not yet supported.	2015-04-06 23:03:06 +02:00
Edward Patel	9a093b2e8f	Added #error + mention not to enable ABL and Mesh at the same time	2015-04-06 19:38:59 +02:00
AnHardt	6ae714894e	Now the simplycistic solution. ... Just and only display splashscreen only once.	2015-04-06 12:43:38 +02:00
AnHardt	d521693641	Revert "Draw content in display loop only when needed" ... This reverts commit bf04a92cc0.	2015-04-06 12:31:31 +02:00
Natealus	b6f2bff461	Azteeg X3 Pro Pin fix ups	2015-04-05 23:34:56 -06:00
Scott Lahteine	d867c18535	Fix compile error with Z_DUAL_ENDSTOPS	2015-04-05 20:48:08 -07:00
Richard Wackerbarth	46474cf2f2	Incorporate @section headers from configurator	2015-04-05 22:39:40 -05:00
Richard Wackerbarth	cf66cb8808	Bring configurator up-to-date	2015-04-05 22:38:15 -05:00
Richard Miles	1a5293c2ce	Prevents MINTEMP / MAXTEMP when no heaters present ... This commit checks whether or not HEATER_0 is in use, and if not, skips the MIN / MAX temperature checks.	2015-04-05 22:27:14 +01:00
Edward Patel	5360158545	Merge branch 'Development-Marlin' into Development	2015-04-05 20:28:44 +02:00
AnHardt	bf04a92cc0	Draw content in display loop only when needed ... Example for splash screen.	2015-04-05 12:53:20 +02:00
AnHardt	9865318f1c	Disable splash-screen when done once ... Splash screen was shown with every display init. That means every time the menus where entered. Note the 2 in the initialisation. The buffer is already written in two steps a 512 byte. Without the 2 only the upper half is shown.	2015-04-05 12:24:01 +02:00
Scott Lahteine	53eb662908	Have the configurator read from MarlinFirmware repo	2015-04-04 20:19:17 -07:00
Edward Patel	d24ea7c03f	Added Comment in hope of github seeing these updates	2015-04-05 05:14:06 +02:00
Edward Patel	61de6ecd54	Added change to example Configuration.h's	2015-04-05 04:26:35 +02:00
Edward Patel	2f0081bbb5	Compile error fix! Fix for merge artifacts.	2015-04-05 04:16:16 +02:00
Edward Patel	0e6514e7bd	Bug fix! Missed putting z value back in right slot after zigzag mod.	2015-04-05 04:13:34 +02:00
Edward Patel	ea10601406	Merge branch 'Development-Marlin' into Development ... Conflicts: Marlin/Configuration.h Marlin/Marlin_main.cpp	2015-04-05 04:06:02 +02:00
Scott Lahteine	cb02bc6db4	Merge pull request #1817 from AnHardt/dogm_looptest ... Execute DOGM display-loop less often	2015-04-04 17:29:56 -07:00
quillford	b02a55e60f	Fixed scara directions ... Config said for a delta instead of for a scara	2015-04-04 15:26:35 -07:00
Scott Lahteine	6c5f07c5cb	Merge pull request #1813 from thinkyhead/fixup_probing ... Fix bad thermal runaway trigger	2015-04-04 14:41:43 -07:00
AnHardt	340d165a9c	Reduce display updates for dogm displays ... In 'if (encoderPastThreshold || LCD_CLICKED)' lcdDrawUpdate was not set. 'lcd_status_update_delay'-loop was not effective in function lcd_status_screen(). The loop prevented the update of the status screen but not the displays update. Shifted the loop into lcd_update().	2015-04-04 22:02:24 +02:00
AnHardt	418d22d7b3	Revert "Testloop cleanup" ... This reverts commit 6361404b91.	2015-04-04 18:33:36 +02:00
AnHardt	6361404b91	Testloop cleanup ... Shifted condition should still be in.	2015-04-04 17:56:13 +02:00
AnHardt	6d4b3f0d6a	Move the condition before the loop ... Result see: https://youtu.be/AEnBzdu9_tk Dot is moving not so fast -> less executed loops.	2015-04-04 17:49:39 +02:00
AnHardt	4cb7dfc546	Move the 'alive dot' in every displayloop ... Result see: https://www.youtube.com/watch?v=tdu7J0i-c4g Loop is executed several times per display update.	2015-04-04 17:34:28 +02:00
Scott Lahteine	b0f198c153	heater_index above its use	2015-04-04 06:18:08 -07:00
Scott Lahteine	60f8e0386f	More thermal runaway states	2015-04-04 05:45:36 -07:00
Scott Lahteine	f9dbd73652	Fix tr_target_temperature type - float!	2015-04-04 05:25:53 -07:00
Scott Lahteine	c83faa9c5e	Merge pull request #1811 from thinkyhead/fixup_probing ... Compare indices instead of floats for probe actions	2015-04-04 05:14:59 -07:00
Scott Lahteine	61f8394361	Compare indices instead of floats for probe actions	2015-04-04 05:01:16 -07:00
Scott Lahteine	a98183b463	Merge pull request #1809 from Wackerbarth/LanguageCleanup ... Deferring default definition made #undef unnecessary	2015-04-04 04:37:20 -07:00
Scott Lahteine	41ded7e996	Merge pull request #1805 from thinkyhead/fixup_probing ... Optimize coordinate copying, fix EXTRUDER_RUNOUT_PREVENT	2015-04-04 03:49:54 -07:00
Richard Wackerbarth	4119738e69	Deferring default definition made #undef unnecessary	2015-04-04 05:48:07 -05:00
Scott Lahteine	6f06d33be5	Fix missing refresh_cmd_timeout function	2015-04-04 03:47:25 -07:00
Scott Lahteine	2d099a2c70	Fix missing backslash in macro	2015-04-04 03:35:16 -07:00
Scott Lahteine	0f9b29e6c5	Merge pull request #1803 from Natealus/Development ... Z_PROBE_ENDSTOP Pin for Azteeg X3 Pro	2015-04-03 23:45:05 -07:00
Scott Lahteine	0935084141	Fix manage_inactivity ... - Document `manage_inactivity` function - Allow `EXTRUDER_RUNOUT_PREVENT` to work with all extruders - Use faster `memcpy` for copying coordinates	2015-04-03 23:42:50 -07:00
Scott Lahteine	c065da52ec	Spacing and spelling	2015-04-03 22:54:48 -07:00
Scott Lahteine	a3e129e091	Merge pull request #1801 from thinkyhead/fixup_probing ... Minor optimizations	2015-04-03 22:30:01 -07:00
Natealus	ab11f90da0	Z_PROBE_ENDSTOP Pin for Azteeg X3 Pro ... Just a simple #ifdef Z_PROBE_ENDSTOP to define the pin for it. Also has a couple commented lines for switching Z_MIN_PIN if needed.	2015-04-03 23:14:03 -06:00
Scott Lahteine	8680b515b0	Fix missing tmp_extruder -> target_extruder	2015-04-03 22:12:49 -07:00
Natealus	a6ba40ae48	Compiling error temperature.cpp with multiple extruders defined ... It wouldn't compile because of this line in temperature.cpp it turns out it was just a stray ( that didn't line up with the previous lines so I just made it in line with the rest and it compiled fine.	2015-04-03 23:09:31 -06:00
Scott Lahteine	fc3c76fc16	Fix #1800	2015-04-03 22:04:42 -07:00
Scott Lahteine	c185912c19	Latest upstream commits, mostly	2015-04-03 21:58:48 -07:00
Scott Lahteine	1e5c18bb14	Add code_value_short and SERIAL_CHAR	2015-04-03 21:43:30 -07:00
Scott Lahteine	e0d4368cb5	Minor code cleanup, move NUM_AXIS out of config	2015-04-03 20:45:24 -07:00
Scott Lahteine	4c7af484f8	Merge pull request #1787 from thinkyhead/fixup_tr ... Fix: thermal_runaway_protection triggered by target temperature increase	2015-04-03 20:06:56 -07:00
Scott Lahteine	c747becec1	Merge pull request #1796 from thinkyhead/pidbed_temp_eeprom ... Add PIDTEMPBED to EEPROM	2015-04-03 20:03:38 -07:00
Scott Lahteine	84e4edaea7	Add M48 comment for #1794	2015-04-03 19:52:00 -07:00
Scott Lahteine	9ba55baa5b	Track target temperature separately for each heater	2015-04-03 19:42:40 -07:00
Scott Lahteine	528e32a1d4	Fix timeout in thermal_runaway when temperature is set higher	2015-04-03 19:34:55 -07:00
Scott Lahteine	b98ebd517e	disable / enable_all_steppers functions	2015-04-03 19:25:22 -07:00
Scott Lahteine	713953d8c1	Upstream commits, allow no extruder in M105	2015-04-03 19:16:38 -07:00
Scott Lahteine	8f893eb8df	Merge pull request #1798 from thinkyhead/fixup_probing ... Fix probe height at G28 start	2015-04-03 19:03:00 -07:00
Scott Lahteine	dde7e11f8e	Merge branch 'Development' into fixup_tr ... Latest upstream commits	2015-04-03 18:56:52 -07:00
Scott Lahteine	abd7fc36b6	Fix probe height at G28 start	2015-04-03 18:54:55 -07:00
Scott Lahteine	610c8c5471	Merge pull request #1795 from thinkyhead/fixup_probing ... Finish pin tests	2015-04-03 18:44:44 -07:00
Scott Lahteine	e4934164e4	Merge pull request #1790 from Wurstnase/fix_home_z ... fix feedrate for homing z	2015-04-03 18:35:09 -07:00
Scott Lahteine	a469d796e1	Add cleanups needed for #1772	2015-04-03 18:14:57 -07:00
Scott Lahteine	c0ca26cd50	Merge branch 'Development' into fixup_probing ... Latest upstream commits	2015-04-03 18:05:17 -07:00
Scott Lahteine	5c1f08a35f	Merge pull request #1772 from croadfeldt/Merge_cleanup ... Z_PROBE_ENDSTOP	2015-04-03 18:04:31 -07:00
Scott Lahteine	db7b0ea0cf	Merge pull request #1569 from Wackerbarth/Development ... Incorporating Build Numbers	2015-04-03 16:56:31 -07:00
Scott Lahteine	92119d0f7d	Static delta[] for SCARA	2015-04-03 16:46:56 -07:00
Scott Lahteine	007a4bd421	Adjust spacing in view function	2015-04-03 16:41:58 -07:00
Scott Lahteine	424d5495e4	Add PIDTEMPBED to EEPROM	2015-04-03 16:38:05 -07:00
Scott Lahteine	6b919e14c1	Group all universal variables	2015-04-03 15:45:41 -07:00
Scott Lahteine	21cd2e4fae	Merge branch 'Development' into fixup_probing ... Latest upstream commits	2015-04-03 15:32:15 -07:00
Scott Lahteine	0e8182bbf2	Additional pin tests, cleanup	2015-04-03 15:31:35 -07:00
Wurstnase	45565b680d	second wrong feedrate	2015-04-03 18:01:28 +02:00
Wurstnase	581b2aae04	fix feedrate for homing z ... max_feedrate is in mm/s. line_to_destination needs a feedrate in mm/min because there is feedrate/60.	2015-04-03 16:11:32 +02:00
Edward Patel	48b1c3822f	Merge branch 'Development-Marlin' into Development	2015-04-03 00:46:30 +02:00
Richard Wackerbarth	ccdaea51ba	Add KosselPro	2015-04-02 09:20:24 -05:00
Richard Wackerbarth	f4599143eb	Allow M115 to better reflect the build	2015-04-02 09:20:24 -05:00
Richard Wackerbarth	34c7d45879	Hook for Auto-generated Build Version ... The automatic versioning system extracts a build version number from the SCM system That versioning information is written to the file _Version.h, a file that is NOT preserved in the SCM. If such a file will be present, we include it here to utilize the parameters that are defined therein.	2015-04-02 09:20:24 -05:00
Scott Lahteine	c756b4cf07	Comment tweak	2015-04-02 06:11:03 -07:00
AnHardt	23cd54755f	Fix typo in Marlin_main.cpp ... related to current_position[Z_AXIS] and retract_zlift. '+ =' -> '+=' Fix for #1786	2015-04-02 14:50:31 +02:00
Scott Lahteine	e96df67630	Clarify thermal_runaway_protection ... - Add comments documenting `thermal_runaway_protection` - Add an enum for the thermal runaway states - Add macros for temperature helper functions - Fix a glitch with the z probe sled in homeaxis	2015-04-02 05:10:14 -07:00
Chris Roadfeldt	0afe6696f0	Merge remote-tracking branch 'MarlinFirmware/Development' into Merge_cleanup	2015-04-01 19:31:20 -05:00
Chris Roadfeldt	59994bd519	Not doing network admin work, pin not ping... :)	2015-04-01 19:24:42 -05:00
Chris Roadfeldt	916f59e35f	Spaces not tabs in language.h. ... Catch unlikely but possible error and head crash when using Z_PROBE_REPEATABILITY_TEST	2015-04-01 19:22:05 -05:00
Scott Lahteine	66b3b53e76	Merge pull request #1762 from AnHardt/MiMa ... Fix MIN&MAX temperatures again	2015-04-01 16:52:07 -07:00
Edward Patel	6b91b7b411	Mesh bed leveling: Added G29 S3 + finer steps in manual probing. ... * Use "G29 S3 Xn Yn Zn.nn" to modify bad probed point manually * Changed manual Z steps from 0.05 to 0.025 and made brought it to Configuration.h	2015-04-01 21:18:51 +02:00
Chris Roadfeldt	26dc80bf2d	Typo fixed...	2015-04-01 13:47:17 -05:00
Chris Roadfeldt	2966ae2022	Fix Z_PROBE_PING not declared, allows code to compile if Z_PROBE_ENDSTOP ... is not used.	2015-04-01 13:32:25 -05:00
Wurstnase	67d5e7973e	old bump_divisor for cartesian/corexy-printer ... some people are starting to ask why homing is so slow. this is the old standard hard-coded value.	2015-04-01 20:17:49 +02:00
Chris Roadfeldt	bb41edc2ef	Fixed extra #endif	2015-04-01 12:13:25 -05:00
Chris Roadfeldt	a57862e29f	Cleaning up code in prep for merge with upstream.	2015-04-01 11:40:24 -05:00
Chris Roadfeldt	745d9fe1a4	Merge remote-tracking branch 'MarlinFirmware/Development' into Merge_cleanup ... Conflicts: Marlin/Marlin_main.cpp	2015-04-01 10:31:02 -05:00
AnHardt	488666832b	Remove the previously introduced ()	2015-04-01 13:40:05 +02:00
Scott Lahteine	443468df8d	Merge pull request #1771 from AnHardt/iss1770 ... Added new - changed entries from Fix up LCD_PROGRESS_BAR	2015-04-01 02:13:30 -07:00
Scott Lahteine	9593f09b99	Merge pull request #1764 from thinkyhead/probe_leveling ... Fix homing and leveling	2015-04-01 02:00:39 -07:00
Scott Lahteine	72c7de3570	Cleanup M48	2015-04-01 01:48:45 -07:00
Scott Lahteine	97a258b0b0	Clean up, document home_axis	2015-04-01 01:44:13 -07:00
AnHardt	831016b09f	Added new - changed entries from Fix up LCD_PROGRESS_BAR ... for when no LCD is defined. Fix for #1770.	2015-04-01 10:17:17 +02:00
Chris Roadfeldt	a508d835db	Changed Z_PROBE_AND_ENDSTOP to Z_PROBE_ENDSTOP. ... Updated documentation in Configuration.h. Cleaned up and commented some code relating to Z_PROBE_ENDSTOP. Separated Z_MIN_ENDSTOP and Z_PROBE_ENDSTOP completely.	2015-04-01 02:14:55 -05:00
Chris Roadfeldt	fdb4ddbdea	Merge remote-tracking branch 'MarlinFirmware/Development' into Development	2015-04-01 00:52:08 -05:00
atfield90	d273c90d53	Added support for Atmega 1281 chip	2015-04-01 05:15:27 +02:00
Scott Lahteine	1c7391717e	Include sync_plan_position_delta for SCARA also	2015-03-31 19:58:03 -07:00
Scott Lahteine	8231fb166d	Merge pull request #1758 from AnHardt/MENU_MULTIPLIER_ITEM ... Fix: Audio feedback for MENU_MILTIPLIER_ITEM click	2015-03-31 19:29:48 -07:00
Scott Lahteine	0b57a2ab8b	Merge pull request #1757 from bq/Translation-strings ... Added new trasnslatable labels.	2015-03-31 18:56:25 -07:00
Scott Lahteine	18bb6be80e	Fix homing and leveling ... - Include the current Z when raising the axis after and between probing - Add `sync_plan_position_delta` for parity with `sync_plan_position` - Clean up and clarify `M48`, `dock_sled`, and others	2015-03-31 18:52:19 -07:00
AnHardt	3f2e863206	Improve conditions for HAS_TEMP ... and use them in temperuture.h Flattened the if structure - the preprocessor is doing the work - not the Arduino. Arduino.	2015-04-01 02:56:14 +02:00
AnHardt	85f8a26ba4	Fix MIN&MAX temperatures again ... replaced GE0 with th matching GEX in the second row. added some ()	2015-04-01 00:48:04 +02:00
AnHardt	19b11dfdd7	Fix can't enter MENU_MULTIPLIER_ITEM	2015-03-31 18:29:16 +02:00
Chris Roadfeldt	c89b8368ee	Merge remote-tracking branch 'MarlinFirmware/Development' into Development ... Conflicts: Marlin/Marlin_main.cpp	2015-03-31 11:08:36 -05:00
Ivan Galvez Junquera	d08782386b	Added new trasnslatable labels. ... * Added MSG_END_HOUR and MSG_END_MINUTE labels to all language files. * Available translations: EN, FR, DE, ES, IT, PT, PT-BR.	2015-03-31 16:59:43 +02:00
Scott Lahteine	97a69d9b1c	Correct XYZ after obtaining plan_bed_level_matrix ... The current position needs to be updated by using the inverse `plan_bed_level_matrix` on X, Y, and Z. All moves in the planner are transformed by the `plan_bed_level_matrix` from this point forward.	2015-03-31 04:24:13 -07:00
Scott Lahteine	5f6962dd90	Merge pull request #1755 from thinkyhead/fixup_config ... Raise when not retracting	2015-03-31 03:47:01 -07:00
Scott Lahteine	ae89ccd2c7	Use Z_RAISE_BETWEEN_PROBINGS	2015-03-31 03:45:21 -07:00
Scott Lahteine	9a5a7a3f68	Raise when not retracting ... Code to raise the probe before retraction is good, but the code should always raise the probe, not just when retracting	2015-03-31 03:38:03 -07:00
Scott Lahteine	6ff1620fcb	Merge pull request #1753 from thinkyhead/fix_extruder_offset ... Fix EXTRUDER_OFFSET compiler error	2015-03-31 03:21:45 -07:00
Scott Lahteine	cda4bd4ad9	Correct the comment about M206	2015-03-31 03:20:15 -07:00
Scott Lahteine	935592cf6a	offsets off by default	2015-03-31 02:50:52 -07:00
Scott Lahteine	2a45922afe	Restore extruder_offset, init more simply	2015-03-31 02:49:47 -07:00
Scott Lahteine	28792e5731	Fix typo in assignment	2015-03-31 02:10:49 -07:00
Scott Lahteine	bb6174524f	Fix EXTRUDER_OFFSET compiler error ... - Addressing issue #1741	2015-03-31 02:08:57 -07:00
Scott Lahteine	571652c49b	Fix LCD click ... - Make the default LCD click sound more pleasant - Fix warnings about bed temperature runaway	2015-03-31 01:41:24 -07:00
Chris Roadfeldt	45ece5afb1	Merge remote-tracking branch 'MarlinFirmware/Development' into Development	2015-03-31 03:07:57 -05:00
Chris Roadfeldt	17707e7479	Fixed Z_PROBE_PIN pullup bug. ... Documented some additional areas that should be addressed if Z_PROBE is fully separated from Z_MIN or Z_MAX. Fixed a documentation error in sanity checks. Servos start at 0 not 1.	2015-03-31 02:56:41 -05:00
Scott Lahteine	21ab44cfa7	Merge pull request #1750 from thinkyhead/fixup_config ... Bring all configs up to date	2015-03-30 23:49:04 -07:00
Scott Lahteine	50145266cd	Merge pull request #1748 from thinkyhead/raise_before_homing ... Apply Z_RAISE_BEFORE_HOMING before homing XY	2015-03-30 23:37:41 -07:00
Scott Lahteine	a117b6bff6	Merge pull request #1747 from thinkyhead/progress_bar_tweak ... Fix up LCD_PROGRESS_BAR	2015-03-30 23:37:28 -07:00
Scott Lahteine	3348b3bf0c	Allow SD_FINISHED_RELEASECOMMAND to be undefined	2015-03-30 23:31:48 -07:00
Scott Lahteine	82794fa5f7	Add delta generic not renaming	2015-03-30 23:25:04 -07:00
Scott Lahteine	ba2c7cb467	Update configs with all the latest	2015-03-30 23:24:33 -07:00
Chris Roadfeldt	ec1d9c0b8f	Use Z_PROBE_ENDSTOP_INVERTING when checking pin status.	2015-03-31 01:06:01 -05:00
Chris Roadfeldt	3175c70c79	Manually synching back up with MarlinFirmware/Development.	2015-03-31 00:11:11 -05:00
Chris Roadfeldt	faac2af4af	Merge remote-tracking branch 'origin/Development' into Development	2015-03-31 00:03:07 -05:00
Chris Roadfeldt	3be00cce6f	Merge remote-tracking branch 'MarlinFirmware/Development' into Development ... Conflicts: Marlin/Configuration.h	2015-03-30 23:59:01 -05:00
Chris Roadfeldt	e08f8eed05	Revert 06f767d..cba5692 ... This rolls back to commit 06f767d608.	2015-03-30 23:51:36 -05:00
Scott Lahteine	5e82ed4f30	Restore ENDSTOPPULLUPS in Configuration.h	2015-03-30 21:15:16 -07:00
Chris Roadfeldt	992b07ca57	Don't disable Z_RAISE_BEFORE_HOMING when Z_PROBE_AND_ENDSTOP is enabled.	2015-03-30 22:58:10 -05:00
Chris Roadfeldt	cba5692673	Merge remote-tracking branch 'MarlinFirmware/Development' into Development ... Conflicts: Marlin/Marlin_main.cpp Marlin/stepper.cpp	2015-03-30 22:33:05 -05:00
Scott Lahteine	8500c80b33	Apply Z_RAISE_BEFORE_HOMING before homing XY	2015-03-30 20:22:21 -07:00
Scott Lahteine	92b54aa27e	#define HAS_POWER_SWITCH	2015-03-30 19:44:53 -07:00
Scott Lahteine	5519882eea	Fix up LCD_PROGRESS_BAR ... - Some messages should not expire with `PROGRESS_MSG_EXPIRE`. - Simplify conditional for progress bar with sanity checks. - Rename `messageTick` to `expireStatusMillis` and make it the expire time.	2015-03-30 18:00:54 -07:00
Scott Lahteine	6864280803	Use elif and parentheses in conditionals	2015-03-30 16:52:27 -07:00
Scott Lahteine	8c136a5ab5	Conditionals and comments for PS = 0	2015-03-30 16:50:05 -07:00
Scott Lahteine	2faed961ce	Allow POWER_SUPPLY 0 for no power switch	2015-03-30 16:39:47 -07:00
Scott Lahteine	baa6787393	Merge pull request #1740 from thinkyhead/fixup_homing ... Apply leveling for DELTA	2015-03-30 15:45:33 -07:00
AnHardt	9ac7dc675e	Make filament display on dogm_... same as hitachi... ... Thanks @MagoKimbra.	2015-03-30 16:56:21 +02:00
AnHardt	50a732360a	Replace extrudemultiply by extruder_multiply[active_extruder] ... Fix for #1460. Seems to work with only one extruder. Can't test this myself with more.	2015-03-30 13:35:03 +02:00
Scott Lahteine	e63076504d	Merge pull request #1733 from AnHardt/c20 ... Get back folder symbols on Hitachi displays	2015-03-30 01:57:00 -07:00
Scott Lahteine	41d258697a	Pass the z for after probing to retract_z_probe ... A `z_before` value is passed to probe_pt, but the `retract_z_probe` function assumes that Z is 0, doesn’t add `current_position[Z_AXIS]` as other cases do. This may be superfluous, so this is a test, and will be reverted if it has no effect.	2015-03-30 00:45:02 -07:00
croadfeldt	06f767d608	Merge remote-tracking branch 'upstream/development' into development	2015-03-30 02:10:49 -05:00
Scott Lahteine	b47fa8c064	Merge pull request #1735 from AnHardt/compilerCandy ... Remove some further warnings	2015-03-29 23:55:19 -07:00
Scott Lahteine	e96db1cd6c	Make G29 shared function inline	2015-03-29 23:21:39 -07:00
Scott Lahteine	d73b169de3	Apply leveling for DELTA, ... - Fix `prepare_move` function not calling `adjust_delta` - Add more shorthand for plan_buffer_line. - Fix wrong `federate` usage, assuming they are all mm/m - Minor `stepper.cpp` cleanup	2015-03-29 23:16:12 -07:00
Scott Lahteine	85b67e5223	Merge pull request #1738 from thinkyhead/fixup_homing ... Fix G29 E and M48 n	2015-03-29 20:08:19 -07:00
Scott Lahteine	ce44bee28b	Small code reduction	2015-03-29 19:45:14 -07:00
Scott Lahteine	0213f7f016	Cleanup case for M666	2015-03-29 19:39:43 -07:00
Scott Lahteine	803425e12c	Fix G29 E and M48 n ... - Users prefer `G29 E` to work like `M48 E` so fixed that - `M48 n` replaced with `M48 P` (or `p`). `n` legacy support - Shorten some strings to save precious bytes - Smaller code for 3-point probing	2015-03-29 18:56:09 -07:00
Scott Lahteine	1e9999711c	Merge pull request #1736 from thinkyhead/fixup_homing ... Fix G28 homing Y with X	2015-03-29 18:27:17 -07:00
Scott Lahteine	d738b7acdd	Merge pull request #1724 from Natealus/Development ... Viki 2 Pins from Manual and Azteeg X3 Pro Endstop Reswap	2015-03-29 18:26:32 -07:00
Scott Lahteine	e8ae51bfe3	Fix G28 homing Y with X ... - Fixed a typo causing G28 to home incorrectly - Added documentation to G28 - Added homeXYZ bools to neaten the code - Added a note about home_offsets being questionable	2015-03-29 18:06:59 -07:00
AnHardt	7b2550a604	Times can't be negative. ... cardreader.cpp needs temperature.h for autotempShutdown() when AUTOTEMP is defined but warns about unused variables. Unpublished variables by putting them in to temperature.cpp.	2015-03-30 01:58:46 +02:00
AnHardt	507efa771b	Remove unused variable fan_rot ... and satisfy the compiler about the implicit compare.	2015-03-30 01:46:38 +02:00
AnHardt	2b959a7752	Some additional {} to make the compiler happy.	2015-03-30 01:42:35 +02:00
AnHardt	0f1bd6e4a7	In ST7920_SWSPI_SND_8BIT(uint8_t val) parameter is unsigned ... therefor in macro ST7920_WRITE_BYTE(a) cast a to uint8_t to make the compiler happy.	2015-03-30 01:40:58 +02:00
AnHardt	81bab8739d	Get back folder symbols on Hitachi displays ... and make use of column 20.	2015-03-29 17:29:48 +02:00
Chris Roadfeldt	a9802c95b3	Ensure Z_PROBE_PIN is defined if Z_PROBE_AND_ENDSTOP is.	2015-03-29 04:18:37 -05:00
Chris Roadfeldt	62834a1c43	Don't deploy probe on Z Axis homing if Z_PROBE_AND_ENDSTOP is enabled, ... unless Z_SAFE_HOMING is.	2015-03-29 03:55:41 -05:00
Chris Roadfeldt	666fad3494	Typo fixed in sanity check.	2015-03-29 03:25:03 -05:00
Chris Roadfeldt	08a7aa16c5	Don't deploy Z Probe on Z homing if Z_PROBE_AND_ENDSTOP is defined.	2015-03-29 03:21:48 -05:00
Chris Roadfeldt	80285251cc	More config cleanup work for Z_PROBE_AND_ENDSTOP.	2015-03-29 03:06:20 -05:00
Chris Roadfeldt	fe4549cd83	Config file Z_PROBE_AND_ENDSTOP description clean up.	2015-03-29 03:04:59 -05:00
Chris Roadfeldt	82d2f11129	More additional sanity checks for Z_PROBE_AND_ENDSTOP	2015-03-29 02:53:55 -05:00
Chris Roadfeldt	05134f0807	Additional Sanity Checks for Z_PROBE_AND_ENDSTOP	2015-03-29 02:51:51 -05:00
Chris Roadfeldt	c75a5e8c55	Fixed typo for Z_PROBE_AND_ENDSTOP support in pins_RAMPS.h. ... Confirmed Sanity checks are working.....	2015-03-29 02:38:08 -05:00
Chris Roadfeldt	a98ac4033b	Added Z_PROBE_PIN to #define for Z_PROBE_AND_ENDSTOP support.	2015-03-29 02:36:26 -05:00
Chris Roadfeldt	6125124d6c	Config file cleanup for Z_PROBE_AND_ENDSTOP support.	2015-03-29 02:29:16 -05:00
Chris Roadfeldt	324c14943b	Bug fixes for Z_PROBE_AND_ENDSTOP. ... Code cleanup for Z_PROBE_AND_ENDSTOP. Added Z_PROBE_PIN to pins_RAMPS_13.h	2015-03-29 02:16:09 -05:00
Natealus	ca5821aa57	Made #ifdef DELTA branch instead ... Another fellow here gave me the idea to do it this way	2015-03-29 01:08:00 -06:00
Natealus	04fda6b3e9	Undesired behavior with endstops swapped ... Made my swap commented out so its the option not the default.	2015-03-29 00:55:47 -06:00
Natealus	ca1477d830	Revert "Undesired behavior with endstops swapped" ... This reverts commit 15028e9b08.	2015-03-29 00:52:53 -06:00
Natealus	15028e9b08	Undesired behavior with endstops swapped ... I made my changes to swap MIN and MAX endstops on the Azteeg X3 Pro the option rather than the default to fix unexpected reversal.	2015-03-29 00:42:40 -06:00
Nate Stokes	18245c6cd2	Update pins_RAMBO.h ... Updated for the changes that Thinkyhead made before I submitted mine.	2015-03-28 22:29:54 -06:00
Natealus	234a9d0b12	Viki 2 Pins from Manual ... I added in the pins into the new board files for the Azteeg X3, X3 Pro, Printrboard, and Rambo. I'm sure it can be added for others too but these are the manual specified pins. Just like many things here though, I can't test for the boards other than the Azteeg X3 Pro. Hopefully it works smoothly for everyone who happens on this nifty display. :)	2015-03-28 22:11:12 -06:00
Scott Lahteine	a22efc5f11	Merge pull request #1597 from Wurstnase/g29_auto_script ... G29 auto script	2015-03-28 20:54:17 -07:00
Scott Lahteine	62a3da9618	Merge pull request #1723 from thinkyhead/tweak_g92 ... Tweak G92	2015-03-28 20:53:37 -07:00
Scott Lahteine	afff968e88	ARRAY_BY_EXTRUDERS, shorthand to sync planner ... - Add some documentation to planner and stepper headers - Patch up RAMBO pins with undefs - Add `sync_plan_position` inline to set current XYZE - Swap indices in `extruder_offset` to fix initialization values	2015-03-28 20:33:21 -07:00
Scott Lahteine	2b0c25a091	Tweak G92 to call plan_set_position only once, yes?	2015-03-28 19:18:24 -07:00
Natealus	22bea37393	Azteeg X3 Pro Pin Revisions ... I added the fan pins in here and left them at -1 in configuration_adv.h and it works fine. Pinned for a 4 extruder from 1-4 and HE5 being the controller fan, HE6 being the Extruder Auto Fan/Water pump in the Kraken case, and HE7 being for part cooling fan. Added in descriptions for the MIN MAX pin swap and for servo motor additions.	2015-03-28 20:14:42 -06:00
Scott Lahteine	93dc0d0518	Merge pull request #1718 from AnHardt/blink ... Move variable blink from ultralcd.h to dogm_lcd_implementation.h	2015-03-28 16:20:33 -07:00
Scott Lahteine	edb67ea165	Patch generic delta config ... - Addressing issue mentioned at #1699	2015-03-28 14:13:25 -07:00
AnHardt	c481c3b180	Move variable blink from ultralcd.h to dogm_lcd_implementation.h ... to avoid warnings about unused blink. Concentrate definitions of variables in dogm_lcd_implementation.h to one place. Make only local used variable currentfont static.	2015-03-28 13:14:38 +01:00
Chris Roadfeldt	059052889f	Further Sanity Checks for Z_PROBE_AND_ENDSTOP.	2015-03-28 06:08:04 -05:00
Chris Roadfeldt	8b81f20c61	Filling in more places where Z_PROBE_PIN and Z_PROBE_AND_ENDSTOP need to ... be. Added Sanity Check for it. Added hook so it's enabled.	2015-03-28 05:55:42 -05:00
Chris Roadfeldt	fd823449ad	Added serial message for Z Probe trigger.	2015-03-28 05:42:38 -05:00
Chris Roadfeldt	92eb8109ab	Fix declaration of old_z_probe_endstop.	2015-03-28 05:09:48 -05:00
Chris Roadfeldt	44b88b41a2	Added credit for code.	2015-03-28 05:01:04 -05:00
Chris Roadfeldt	2979b40a7a	Fixed typo in Z Probe and Endstop section.	2015-03-28 04:41:03 -05:00
Chris Roadfeldt	9f3ff14008	Enabled separate Z Probe and Z Axis endstop use at same time. ... Typo fixes in comments in existing code.	2015-03-28 04:31:51 -05:00
Scott Lahteine	b14be7235e	Merge pull request #1585 from galexander1/strtod_e_fix ... Fix `code_value` (so `G1X1E2` isn't evaluated as `G1 X100 E2`)	2015-03-27 20:49:03 -07:00
Scott Lahteine	ba871e46bf	Fix compiler warnings ... - Patched up for most included configurations	2015-03-27 20:29:05 -07:00
Scott Lahteine	ffe0df4b36	Latest upstream commits	2015-03-27 18:30:56 -07:00
Scott Lahteine	bc2f249cc6	Merge pull request #1622 from AnHardt/tm-utf-minus-kanji ... The big Language Pack	2015-03-27 18:24:19 -07:00
Scott Lahteine	abfcbd793f	Merge pull request #1693 from chris-bo/rework_lcd_beeper ... use only one implementation for beeper feedback	2015-03-27 17:03:38 -07:00
Scott Lahteine	55739a4efe	Fix Z_APPLY_STEP	2015-03-27 17:02:11 -07:00
Scott Lahteine	df02b992b0	Fix redundant_temperatrure_raw setting	2015-03-27 16:37:22 -07:00
Scott Lahteine	fe29bdd72b	Also fix temperature externs	2015-03-27 16:26:07 -07:00
Scott Lahteine	578f93bc26	Fixup temp arrays and leveling equation, prepare for merge	2015-03-27 16:20:23 -07:00
Scott Lahteine	7d472367e2	Merge pull request #1713 from epatel/Development ... Parentheses need here otherwise sanitycheck.h does wrong thing on line 222	2015-03-27 16:14:55 -07:00
Scott Lahteine	ce485175eb	Give all temp arrays 4 indices	2015-03-27 16:11:28 -07:00
Edward Patel	782464ea4d	Parentheses need here otherwise sanitycheck.h does wrong thing on line 222	2015-03-27 20:22:59 +01:00
Scott Lahteine	460f73056b	Fix ECHOPAIR ambiguity ... - Also patch up some warnings	2015-03-27 00:46:39 -07:00
Scott Lahteine	19d418cd6a	Fix up the code to eliminate warnings	2015-03-27 00:32:58 -07:00
Scott Lahteine	b2496533c6	Put " M" into pmem	2015-03-26 20:30:14 -07:00
Scott Lahteine	267d6bef15	Eliminate most warnings ... - Fix a bug reading `code_value` for `M503 Sn` - Hide and remove unused variables	2015-03-26 20:07:17 -07:00
Scott Lahteine	3fd7790a15	Merge branch 'Development' into fixup_leveling ... Latest upstream commits	2015-03-26 19:56:58 -07:00
Scott Lahteine	b76a352d41	Fix the planeNormal calculation	2015-03-26 17:14:07 -07:00
Scott Lahteine	410f64782a	Always 4 temp sensors	2015-03-26 16:22:21 -07:00
Scott Lahteine	0b32431551	Remove abs() from planeNormal.z	2015-03-26 16:20:23 -07:00
Scott Lahteine	53169d96e8	Set temp_meas_ready in set_current_temp_raw	2015-03-26 16:02:15 -07:00
Scott Lahteine	06eb7f5b3c	Latest upstream commits	2015-03-26 15:30:51 -07:00
Scott Lahteine	04328d7537	Add zprobe_zoffset in set_bed_level_equation_* ... - Also a small tweak to SanityCheck.h	2015-03-26 15:29:16 -07:00
Scott Lahteine	d2e73545ba	Merge pull request #1705 from AnHardt/ddt ... Avoid warnings in SanitiCheck.h	2015-03-26 15:16:37 -07:00
Scott Lahteine	78090275a9	Fix probe range editing ... - Increase the probe offset range to -20…20 - Apply the range limits to the menu item	2015-03-26 13:52:48 -07:00
AnHardt	1ff6df8f9e	Avoid warnings in SanitiCheck.h ... /SanityCheck.h:107:53: warning: missing terminating ' character ...	2015-03-26 21:30:53 +01:00
AnHardt	ebe5b87c2c	< like in the oher compareble loops ... to avoid: Marlin_main.cpp:1790: warning: array subscript is above array bounds.	2015-03-26 21:18:19 +01:00
AnHardt	20f909567a	Merge https://github.com/MarlinFirmware/Marlin into tm-utf-minus-kanji ... Conflicts: README.md Solved	2015-03-26 10:05:00 +01:00
Christian Bohn	eab5fad539	code formatting	2015-03-26 09:00:34 +01:00
Scott Lahteine	abadeac08d	Group zprobe_zoffset with bed leveling	2015-03-25 23:06:33 -07:00
Scott Lahteine	9e8427f253	Merge pull request #1698 from zeuseye/Development ... Clean "fromsd" array if not SDSUPPORT	2015-03-25 22:21:57 -07:00
Scott Lahteine	32331faee4	Prettify Bed Level Correction Matrix ... - Put + in front of positive values in the output	2015-03-25 22:13:59 -07:00
Scott Lahteine	f5f4c2b366	Merge branch 'Development' into fixup_leveling ... Latest upstream commits	2015-03-25 21:30:49 -07:00
Scott Lahteine	7667023817	Merge pull request #1694 from Wurstnase/fix_z_config ... comment #define Z_DUAL_STEPPER_DRIVERS	2015-03-25 21:28:17 -07:00
Scott Lahteine	5eff15c409	Merge branch 'Development' into fixup_leveling ... Latest upstream commits	2015-03-25 21:24:38 -07:00
Scott Lahteine	ad05a726c1	Merge pull request #1691 from AnHardt/PID_dt ... Move definition of PIDdT back to temperature.h	2015-03-25 21:22:39 -07:00
Scott Lahteine	5261d35737	Fix custom m-code behavior ... Don’t set CUSTOM_M_CODE_SET_Z_PROBE_OFFSET if there’s no Z probe	2015-03-25 21:20:50 -07:00
Scott Lahteine	fbf9b21e0c	Merge plus fixup zprobe_zoffset ... - Make `zprobe_zoffset` conditional - Fix ConfigurationStore for `zprobe_zoffset`	2015-03-25 21:14:00 -07:00
Scott Lahteine	96b5da7198	Fix up bed leveling code ... - Init `zprobe_zoffset` - Remove `current_position[Z_AXIS] = zprobe_zoffset` lines from the `set_bed_level_equation_*` functions - Apply standards to `mesh_bed_leveling` files - Document `MESH_BED_LEVELING`	2015-03-25 20:36:24 -07:00
Scott Lahteine	02b4f5f9cd	Merge pull request #1689 from AnHardt/MAXand161 ... Fix MAX6675 again and introduce set_current_temp_raw()	2015-03-25 20:23:51 -07:00
AnHardt	f680e509c4	Enclosed error-messages for TEMP_SENSOR_1_AS_REDUNDANT in PSTR()	2015-03-25 23:26:06 +01:00
Victor Torre	d43d47da14	Clean "fromsd" array is not SDSUPPORT ... if not have SDSUPPORT the fromsd array is not necessary	2015-03-25 22:05:18 +01:00
AnHardt	ac81b4084f	Make variables and function static.	2015-03-25 21:37:15 +01:00
alexborro	55025558dc	Implement Dry-Run mode in G29 ... It just probe all the bed without appliying the matrix. Useful after a first G29 to check the topology.	2015-03-25 11:12:30 -03:00
wurstnase	a4ad9117dd	comment #define Z_DUAL_STEPPER_DRIVERS	2015-03-25 13:46:29 +01:00
chris-bo	2dfd0e5ce7	Update Configuration.h ... documentation how to disable buzzer feedback	2015-03-25 12:44:29 +01:00
Christian Bohn	4c3cbc0961	use only one implementation for beeper feedback	2015-03-25 12:23:50 +01:00
AnHardt	01cc97a3c3	Corected condition for PIDdT	2015-03-25 12:08:23 +01:00
AnHardt	94330705c7	Move definition of PIDdT back to temperature.h ... make it unconditional remove all definitions in the 'Configuration.h's remove form 'Conditionals.h'	2015-03-25 11:51:41 +01:00
AnHardt	dd0067afa6	Fix MAX6675 again and introduce set_current_temp_raw() ... to make the temperature-code work again with Arduino 1.0.6. Sorry could not make an extra block on base level.	2015-03-25 11:08:24 +01:00
AnHardt	8848b7e9ef	Add the missed {} to END_MENU in ultralcd.cpp ... what caused an extra update of encoderLine most of the time.	2015-03-25 09:48:21 +01:00
AnHardt	4beffbca69	Make SMALL_INFOFONT configurable. ... Tweak the documentation	2015-03-24 23:40:04 +01:00
CONSULitAS	045ea42cc8	Merge remote-tracking branch 'upstream/Development' into Development	2015-03-24 22:52:02 +01:00
alexborro	c2ba5d0c09	Fix ZigZag and Topograph table ... ZigZag: Inverted Behavior.. If T supplied, it does not zigzag. Topograph table: The table was rotated 90º clockwise.	2015-03-24 15:50:31 -03:00
alexborro	0ce3576685	New Feature: Z_DUAL_ENDSTOPS ... Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z steppers - Let's call them Z stepper and Z2 stepper. That way the machine is capable to align the bed during home, since both Z steppers are homed. There is also an implementation of M666 (software endstops adjustment) to this feature. After Z homing, this adjustment is applied to just one of the steppers in order to align the bed. One just need to home the Z axis and measure the distance difference between both Z axis and apply the math: Z adjust = Z - Z2. If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it is.. think about it) and the Z adjust would be positive. Play a little bit with small adjustments (0.5mm) and check the behaviour. The M119 (endstops report) will start reporting the Z2 Endstop as well.	2015-03-24 14:06:44 -03:00
AnHardt	c686069ccd	Revert "Remove 6x9 font" ... This reverts commit e6cb8ee188. Conflicts: Marlin/dogm_lcd_implementation.h Confilkt solved Needs rework.	2015-03-24 17:13:05 +01:00
AnHardt	b00a531df8	Revert "Removed now unneded FONT_STATUSMENU" ... This reverts commit 8c5bb38748.	2015-03-24 17:01:56 +01:00
AnHardt	9d589cbb2a	Merge https://github.com/MarlinFirmware/Marlin into tm3-utf-minus-kanji ... Conflicts: Marlin/example_configurations/delta/generic/Configuration.h Marlin/example_configurations/delta/kossel_mini/Configuration.h Marlin/language.h Conflicts solved	2015-03-24 16:59:15 +01:00
Scott Lahteine	8db4fd7177	Merge branch 'Development' into planner_oh_planner ... Latest upstream commits	2015-03-23 22:08:50 -07:00
Scott Lahteine	0d81abe1c9	Merge branch 'Development' into config_testing ... Latest upstream commits	2015-03-23 21:13:04 -07:00
Scott Lahteine	01740fd9c6	Merge branch 'Development' into planner_oh_planner ... Latest upstream commits	2015-03-23 21:12:36 -07:00
Scott Lahteine	fc53e43de6	Don't test raw temp for MAX6675 ... - Remove test of raw temp for thermistor 0 when using MAX6675 - Longer `raw_temp_value` array for `TEMP_SENSOR_1_AS_REDUNDANT`	2015-03-23 20:55:48 -07:00
Scott Lahteine	03fa9fae9f	Merge branch 'Development' into fix_temperature_minmax ... Latest upstream commits	2015-03-23 20:42:48 -07:00
Scott Lahteine	1fac388664	Revert measurement loop	2015-03-23 15:18:22 -07:00
CONSULitAS	703f3b38c4	Merge remote-tracking branch 'upstream/Development' into Development	2015-03-23 17:40:49 +01:00
nicolas-rambaud	37cde8a191	Report changes from previous PR from old code base including : ... I've updated the minimum values from the LCD. It has been a while that i want to at least fix this. I have an inductive probe and often i need to set my zOffset to something lower than 0.5. With the current implementation, the default LCD value is set to 0.5 for some reason. On my case i need to be able to set it down to 0.0 as my inductive probe can be lower than 0.5. Before with the LCD we couldn't change this value below 0.5. We had to flash the firmware every time which was painful. Now we are able to change this value down to 0.0 if needed. I've also changed the minimum value for Z min acceleration. In the default configuration it's set to 25 but on the LCD the minimum was 100 which is not coherent. I've changes the minimum to 10. On this axis, depending on the mechanics/motor drivers we might require very low acceleration, so i guess 10 is somehow realistic.	2015-03-23 12:29:12 +01:00
Scott Lahteine	b26a3ea02c	Merge pull request #1662 from josla972/refactor_scara ... Refactor SCARA calibration. Save some lines of code and possibly ROM.	2015-03-23 00:51:18 -07:00
wurstnase	e6f6c6e3a1	fix bad insertion config again	2015-03-23 08:32:48 +01:00
Scott Lahteine	6bdee87be3	Cleanup temperature code ... - Get rid of unused temp states in the ISR, resulting in more frequent temperature reading with fewer sensors - Shrink code slightly in min/max testing	2015-03-23 00:27:29 -07:00
Scott Lahteine	34a41648ab	Merge branch 'Development' into planner_oh_planner ... Latest upstream commits	2015-03-22 23:40:29 -07:00
Scott Lahteine	4fbb80567e	Get upstream commits	2015-03-22 23:07:22 -07:00
Scott Lahteine	7717e1ce33	Fix bad insert in configuration	2015-03-22 21:48:46 -07:00
Scott Lahteine	146501215f	Fix mangled probe_pt calls ... - Address issue #1669 - Remove the TOPO_ORIGIN configuration setting	2015-03-22 21:45:20 -07:00
maverikou	15345cc249	Corrected Z_PROBE_ALLEN_KEY behaviour.	2015-03-22 13:54:51 +02:00
maverikou	0f034dd97e	Clean up Z_RAISE_AFTER_PROBING to work the same in all code paths except Z_PROBE_SLED.	2015-03-22 13:54:45 +02:00
maverikou	6c96f32069	Blind fix for #1507	2015-03-22 13:54:21 +02:00
Josef Larsson	379348487e	Removed malplaced comment.	2015-03-22 12:21:31 +01:00
Scott Lahteine	8bd6e37b21	Merge pull request #1661 from thinkyhead/G92_no_offset ... Don't add home offsets in G29	2015-03-21 16:49:06 -07:00
Scott Lahteine	582cd780cd	Fix compile error with *_DUAL_STEPPER_DRIVERS ... - Patch up macros in stepper.cpp	2015-03-21 16:43:47 -07:00
Josef Larsson	9b3462f73f	Refactor SCARA calibration. Save some lines of code and possibly ROM.	2015-03-22 00:37:24 +01:00
Scott Lahteine	691e753cc3	Don't add home offsets in G29 ... - Address #1262 by leaving values as set - Rename `add_homing` to `home_offset`	2015-03-21 16:30:02 -07:00
Scott Lahteine	88e81a4804	Latest upstream commits, plus fixes ... - Also add Manual Bed Leveling to the rest of the configs	2015-03-21 16:12:57 -07:00
Scott Lahteine	15eb5d35a2	Merge branch 'Development' into config_testing ... Latest upstream commits	2015-03-21 15:42:45 -07:00
Scott Lahteine	19df90622b	Include Conditionals.h file in update	2015-03-21 15:40:20 -07:00
Scott Lahteine	9b639b4135	Merge pull request #1619 from epatel/manual-bed-leveling+mesh-bed-level ... Manual bed leveling + mesh bed leveling	2015-03-21 15:39:42 -07:00
Scott Lahteine	2c9bd15625	Move LCD items to Conditionals.h ... - `Conditionals.h` is included twice, setting LCD values the first time	2015-03-21 15:24:57 -07:00
Scott Lahteine	63abeaff38	Merge branch 'Development' into config_testing ... Latest upstream commits	2015-03-21 15:03:06 -07:00
Scott Lahteine	3703694e30	Fix temperature min/max test ... - Base tests on all thermistors/thermocouples, not just heater 0	2015-03-21 14:23:43 -07:00
Edward Patel	3d0a060a7a	Added G29 command	2015-03-21 14:50:47 +01:00
Edward Patel	c516747847	Merge branch 'Development' into manual-bed-leveling+mesh-bed-level	2015-03-21 14:49:52 +01:00
Scott Lahteine	af14c684b5	Minor optimizations to planner code ... - Prefetch values used more than once	2015-03-20 20:57:06 -07:00
Scott Lahteine	13fbf42d95	Cleanup of planner code ... - Use named axis indexes, `X_AXIS` etc. - Replace `block.steps_A` with block.steps[A]` - Replace `A_segment_time` with `segment_time[A]` - Add `A_AXIS`, `B_AXIS` for `COREXY` axes - Conditional compile based on `EXTRUDERS` - Add BLOCK_MOD macro for planner block indexes - Apply coding standards to `planner.h` and `planner.cpp` - Small optimizations of planner code - Update `stepper.cpp` for new `block` struct - Replace `memcpy` with loops, let the compiler unroll them - Make `movesplanned` into an inline function	2015-03-20 20:42:49 -07:00
AnHardt	64e3d33893	Fix shrinked menucode ... by updating 'encoderPosition' in END_MENU() line 1.	2015-03-20 23:36:14 +01:00
Edward Patel	a7e89d4cfa	Merge branch 'Development' into manual-bed-leveling+mesh-bed-level	2015-03-20 15:46:01 +01:00
AnHardt	8c5bb38748	Removed now unneded FONT_STATUSMENU	2015-03-20 14:12:12 +01:00
Scott Lahteine	2176a22d42	Fix count_direction initializer ... - Addressing #1625	2015-03-20 05:45:05 -07:00
AnHardt	e72cb3e45d	Merge https://github.com/MarlinFirmware/Marlin into tm2-utf-minus-kanji ... Conflicts: Marlin/dogm_lcd_implementation.h Marlin/ultralcd_implementation_hitachi_HD44780.h Fix merge conflicts 2	2015-03-20 13:35:47 +01:00
Scott Lahteine	cb6942d4a7	Merge branch 'Development' into config_testing ... Get upstream commits	2015-03-20 05:30:36 -07:00
AnHardt	6bfccaf99e	Merge https://github.com/MarlinFirmware/Marlin into tm2-utf-minus-kanji ... Conflicts: Marlin/dogm_lcd_implementation.h Marlin/ultralcd_implementation_hitachi_HD44780.h Fixed conflicts 1	2015-03-20 13:08:18 +01:00
Scott Lahteine	5644ad6809	Fix hiliting of edit items	2015-03-20 04:29:35 -07:00
Scott Lahteine	63d5d28085	Merge branch 'Development' into config_testing ... Latest upstream changes	2015-03-20 04:15:18 -07:00
Scott Lahteine	526a755a66	Merge pull request #1652 from AnHardt/PIDdebug ... PID debug	2015-03-20 04:14:08 -07:00
Scott Lahteine	a1c240b0a4	Delta supports some auto bed leveling options	2015-03-20 04:04:45 -07:00
Edward Patel	5112cf8422	Added comment for the EEPROM storage	2015-03-20 11:46:47 +01:00
Edward Patel	4619d80524	Merge branch 'Development' into manual-bed-leveling+mesh-bed-level	2015-03-20 11:45:06 +01:00
Scott Lahteine	199151a4ed	Merge pull request #1650 from AnHardt/beautify ... Beautivy statusscreen	2015-03-20 03:38:02 -07:00
Scott Lahteine	2424713a8f	Merge pull request #1640 from AnHardt/warning6 ... codepos not used in gcode_M28()	2015-03-20 02:58:00 -07:00
Scott Lahteine	b6d381f863	Divide up Conditionals to get LCD items early	2015-03-20 02:50:28 -07:00
AnHardt	e85061d20d	Added changes to the 'new' Configuration.h s	2015-03-20 10:36:29 +01:00
Scott Lahteine	33c7c6e11d	Conditionals.h requires Arduino.h	2015-03-20 01:27:14 -07:00
Scott Lahteine	8ade04b78e	Felix and Hephestos configs ... - Not sure why these are showing as all new	2015-03-19 22:25:05 -07:00
Scott Lahteine	670006b919	Remove invariant code from Configurations ... - Add `Conditionals.h` with calculated configuration values - Add `SanityCheck.h` with checks for configuration errors - Remove equivalent code from all configurations - Move error checks from some sources to `SanityCheck.h` also - Fix initialization of count_direction in stepper.cpp	2015-03-19 22:22:23 -07:00
Edward Patel	a61f679568	Merge branch 'Development' into manual-bed-leveling+mesh-bed-level	2015-03-20 02:28:35 +01:00
Edward Patel	c87faa69ed	Shortened mesh_plan_buffer_line()	2015-03-20 02:18:49 +01:00
AnHardt	47c1ea72af	Merge https://github.com/kieranc/Marlin into PIDdebug ... Conflicts: Marlin/temperature.cpp Cleaned merge conflict. Codeposition had changed. Variable pid_input had vanished. Signed-off-by: AnHardt <github@kitelab.de>	2015-03-20 00:07:36 +01:00
AnHardt	f1d3d1524d	Merge branch 'optimize_menu_code' of https://github.com/thinkyhead/Marlin into beautify ... Conflicts: Marlin/dogm_lcd_implementation.h solved merge conflict.	2015-03-19 22:51:22 +01:00
AnHardt	fa889cd6e1	Beautivy statusscreen ... by shifting things some pixels around	2015-03-19 22:13:37 +01:00
Scott Lahteine	7279e4f82f	Small code tweaks re lcd.print	2015-03-19 14:01:33 -07:00
Scott Lahteine	90ba61b9b8	Include indicator for new drawmenu_generic ... In the new method we pass the character that should be used for selected state, not the character to print always.	2015-03-19 13:49:06 -07:00
Scott Lahteine	15d29efad5	Pass sel to lcd_implementation_mark_as_selected ... - Pass selected state directly to lcd_implementation_mark_as_selected - Rename sel function parameter - Include a minor fix for SdBaseFile.h	2015-03-19 13:40:36 -07:00
Scott Lahteine	a547dc2148	Merge branch 'Development' into optimize_menu_code ... Get upstream changes	2015-03-19 13:31:37 -07:00
CONSULitAS	9c1f6e7ac7	Merge remote-tracking branch 'upstream/Development' into Development	2015-03-19 18:49:34 +01:00
alexborro	e650d4044e	Fix "Stop Print" function in the LCD menu ... When one hit "Stop Print" option in LCD menu, the command buffer was not cleared. The printer keep moving until the buffer has been emptied. Actually I could not clear the command buffer as well.. I don't know why, it doesnt work as expected. I need to implement a routine inside Stepper ISR to handle such situation.	2015-03-19 14:16:18 -03:00
AnHardt	e917477fec	Merge https://github.com/MarlinFirmware/Marlin into tm-utf-minus-kanji ... Conflicts: Marlin/dogm_lcd_implementation.h Marlin/fonts/make_fonts.bat Claerd conflicts with my own #1621. (His was easy. :-) ) corrected typo in fonts/README.fonts Applied changes to the new delta-configurations and deletet there some extra whitespace at the line-endings.	2015-03-19 12:35:43 +01:00
AnHardt	ae01a6b5f2	Make use of codepos. ... Saves one addition. Needs one pointer on the stack. Don't know if this is a go trade.	2015-03-19 09:45:16 +01:00
Scott Lahteine	a534ac197a	Merge pull request #1621 from AnHardt/remove--6x9-font ... Remove 6x9 font	2015-03-18 23:10:42 -07:00
Scott Lahteine	80e0ee10ca	Merge pull request #1631 from AnHardt/iss1593 ... Decrease KILL_DELAY	2015-03-18 19:10:38 -07:00
Scott Lahteine	4ce79920e5	Merge pull request #1635 from AnHardt/warnings1 ... Negative times are unlikly	2015-03-18 19:10:12 -07:00
Scott Lahteine	76127b8a55	Merge pull request #1630 from Wurstnase/fix_g29 ... optional parameters must be named when ignoring order	2015-03-18 19:09:40 -07:00
Scott Lahteine	be3f2dc1d9	Merge pull request #1636 from AnHardt/warning2 ... lcd_control_retract_menu() is conditional.	2015-03-18 19:09:05 -07:00
Scott Lahteine	8d396584bf	Merge pull request #1637 from AnHardt/warning3 ... lcd_autostart_sd() has two conditions.	2015-03-18 19:08:33 -07:00
Scott Lahteine	8664c6d465	Merge pull request #1638 from AnHardt/warning4 ... delta[3] not used when DELTA not defined.	2015-03-18 19:07:55 -07:00
Scott Lahteine	10711ccc6a	Merge pull request #1639 from AnHardt/warning5 ... G4 could wait for an undefined time	2015-03-18 19:07:14 -07:00
Edward Patel	28c91deb5c	EEPROM saving of z_values. ... Tried to make it a little intelligent.	2015-03-18 21:07:07 +01:00
Edward Patel	240b5cfe04	Merge branch 'Development' into manual-bed-leveling+mesh-bed-level	2015-03-18 19:19:46 +01:00
alexborro	4521f6655b	Restore "S" parameter of M204 for retrocompatibility.	2015-03-18 12:19:30 -03:00
alexborro	5ddb8d94e2	Update Documentation related to M204	2015-03-18 11:09:10 -03:00
AnHardt	f8c4d43886	delta[3] is used with SCARA ... Shoot in the dark.	2015-03-18 12:14:49 +01:00
AnHardt	72a9fed4fb	codepos not used in gcode_M28() ... Got: Marlin_main.cpp:2567: warning: unused variable 'codepos' Needs revision. Don't now how this should look like.	2015-03-18 11:41:14 +01:00
AnHardt	b94dd33641	G4 could wait for an undefined time ... Got: Marlin_main.cpp:1689: warning: 'codenum' may be used uninitialized in this function And indeed codenum is undefined when no parameter is given.	2015-03-18 11:23:41 +01:00
AnHardt	e90985a4e8	delta[3] not used when DELTA not defined. ... got: Marlin_main.cpp:387: warning: 'delta' defined but not used Compiles cleaner when definition is removed.	2015-03-18 11:11:49 +01:00
AnHardt	5099b86ad4	lcd_autostart_sd() has two conditions. ... got: ultralcd.cpp:408: warning: 'void lcd_autostart_sd()' defined but not used	2015-03-18 10:51:13 +01:00
AnHardt	5d81c779cc	lcd_control_retract_menu() is conditional. ... Got: ultralcd.cpp:64: warning: 'void lcd_control_retract_menu()' declared 'static' but never defined	2015-03-18 10:39:59 +01:00
AnHardt	450b89e63c	Negative times are unlikly ... While bunting an other bug I stumbled across: ultralcd.cpp:1250: warning: comparison between signed and unsigned integer expressions Changed to the type of lcd_next_update_millis.	2015-03-18 10:31:34 +01:00
AnHardt	d1658eebfc	Decrease KILL_DELAY ... Users hat to press kill-button for unexpexted lon times. See #1593	2015-03-18 01:45:42 +01:00
Wurstnase	00adb2a6c1	optional parameters must be named when ignoring order	2015-03-18 01:02:29 +01:00
Edward Patel	0d43898a22	Remove of mesh_plan_buffer_line parameter reference (e)	2015-03-17 22:55:29 +01:00
Edward Patel	8067a985ce	Merge branch 'Development' into manual-bed-leveling+mesh-bed-level ... Fixed conflicts: Marlin/planner.h	2015-03-17 22:48:08 +01:00
wurstnase	05333f61b7	fix macro	2015-03-17 12:50:44 +01:00
AnHardt	1883e1bb60	Applied thinkyheads corrections from 2015-03-17	2015-03-17 11:23:44 +01:00
AnHardt	be79235ef2	Add new (cleaner) Marlin font ... with sources in /fonts	2015-03-17 10:33:02 +01:00
Scott Lahteine	89fe77468d	Merge pull request #1586 from maverikou/delta_auto_bed_level ... Delta auto bed level (Updated PR)	2015-03-16 18:17:11 -07:00
CONSULitAS	2b1ddc0413	Merge remote-tracking branch 'upstream/Development' into Development	2015-03-16 22:12:17 +01:00
alexborro	cb676cdf39	Fix CoreXY homing bug introduced by PR #1606 ... The Check Endstop logic must be: if (current_block->steps_x != current_block->steps_y || (TEST(out_bits, X_AXIS) == TEST(out_bits, Y_AXIS))) if (TEST(out_bits, X_HEAD)) not if (TEST(out_bits, X_HEAD) && (current_block->steps_x != current_block->steps_y || (TEST(out_bits, X_AXIS) == TEST(out_bits, Y_AXIS)))) Same applies for Y axis.	2015-03-16 16:31:25 -03:00
AnHardt	8a29dd4839	Cleaned typo in dogm_lcd_implementation.h	2015-03-16 20:18:48 +01:00
AnHardt	7e69f72db6	Moved font directory. Updated README.fonts	2015-03-16 17:27:27 +01:00
AnHardt	00b162a993	Merge remote-tracking branch 'origin/utf-kanji' into tm-utf-minus-kanji ... Conflicts: Marlin/language.h Conflict cleaned	2015-03-16 17:13:49 +01:00
AnHardt	e38dd5f030	Merge remote-tracking branch 'origin/utf' into utf-kanji	2015-03-16 17:00:54 +01:00
AnHardt	08e4651ece	Corrected cyrillic font again ... Thank you @Nprod.	2015-03-16 16:59:14 +01:00
Wurstnase	752c804677	remove offset, add minimum scan area	2015-03-16 15:13:16 +01:00
Wurstnase	14f0250853	allow negative values ... and some more comments	2015-03-16 14:26:59 +01:00
AnHardt	e6cb8ee188	Remove 6x9 font ... in dogm_lcd_implementation.h by using standard font and shifting down temperature displays by one pixel Saves 2300 bytes.	2015-03-16 11:18:27 +01:00
maverikou	e93eb3e8d3	Update test	2015-03-16 09:16:00 +02:00
maverikou	b8ae3feb9e	Update test	2015-03-16 09:03:15 +02:00
maverikou	3570447ded	Fix Z_RAISE_AFTER_PROBING	2015-03-16 08:35:49 +02:00
maverikou	8a739b6fba	Merge branch 'Development' into delta_auto_bed_level ... Conflicts: Marlin/Marlin_main.cpp	2015-03-16 08:24:26 +02:00
Scott Lahteine	7629c4f05c	Cleanup for menu optimization ... - Compare pr_char to space - Fewer calls to lcd_strlen	2015-03-15 22:54:54 -07:00
Scott Lahteine	3405f85a6a	Reduce size of menu code ... - Get rid of _selected functions, passing selected state instead	2015-03-15 22:02:33 -07:00
Edward Patel	e983a5ab92	Disable option. Enable for use/test.	2015-03-16 02:50:11 +01:00
Edward Patel	f34b9c83d1	Added comment about MESH_NUM axis points.	2015-03-16 01:48:46 +01:00
Scott Lahteine	a686c9878f	Move TOPO_ORIGIN define to Configuration.h ... - Addressing issue #1608	2015-03-15 15:49:36 -07:00
Edward Patel	8005d22c81	Added menu option for bed leveling.	2015-03-15 23:24:32 +01:00
Edward Patel	0e51e53813	WIP. Adding bed leveling code.	2015-03-15 23:24:32 +01:00
Scott Lahteine	d0d12962e0	Merge pull request #1615 from AnHardt/fix-1611 ... Fix #1611	2015-03-15 15:19:02 -07:00
AnHardt	f0dcea7e14	Fix #1611 ... Warning: suggest parentheses around comparison in operand of & pretty much helped.	2015-03-15 22:52:50 +01:00
AnHardt	28b1c37dea	Fix for #1612	2015-03-15 21:35:33 +01:00
CONSULitAS	a8c1bdabd2	Update: readme.md for K8200 example ... * readme.md: updated typo and URLs	2015-03-15 17:25:31 +01:00
AnHardt	2f374f1465	Removed Kanji.	2015-03-15 16:44:37 +01:00
Scott Lahteine	5efc798642	Merge pull request #1546 from apollo-ng/pr-felix ... Added support for Felix 2.0/3.0 printers	2015-03-15 07:52:22 -07:00
Scott Lahteine	b83e52e50f	Merge pull request #1467 from thinkyhead/marlin_configurator ... Configurator utility	2015-03-15 07:49:19 -07:00
Scott Lahteine	7bc77dc134	Merge pull request #1583 from galexander1/m404fix ... M404 should not use 'N' address as parameter because 'N' is reserved	2015-03-15 07:47:30 -07:00
Scott Lahteine	b80ed51fcc	Fix controllerFan() code ... - Add support for 4th extruder - Fix parentheses matching - Apply coding standards - Address issue mentioned at #1575	2015-03-15 06:55:31 -07:00
Scott Lahteine	4b50205f11	Merge branch 'Development' into marlin_configurator ... Latest upstream changes	2015-03-15 06:37:32 -07:00
Scott Lahteine	bb4cb1b15a	Merge pull request #1606 from thinkyhead/cleanup_stepper ... Cleanup of stepper.cpp	2015-03-15 06:05:08 -07:00
Scott Lahteine	63f41f56f8	Merge pull request #1607 from chris-bo/Development ... Update ultralcd_st7920_u8glib_rrd.h	2015-03-15 01:04:40 -07:00
Scott Lahteine	4eabd80025	Fix babystep for extruder_duplication	2015-03-14 18:31:25 -07:00
alexborro	d3259d0dba	Merge pull request #1581 from msutas/Development ... Filament Runout Sensor Feature	2015-03-14 18:35:20 -03:00
AnHardt	25c4f17e5d	Corrected Cyrillic fonts. Round II.	2015-03-14 15:10:45 +01:00
chris-bo	b73ba26b23	Update ultralcd_st7920_u8glib_rrd.h	2015-03-14 14:31:00 +01:00
Scott Lahteine	c37f7d15c9	- Rename WRITE_E_STEP for consistency ... - Add BIT and TEST macros - Add _APPLY_ macros to stepper.cpp to help with consolidation - Consolidate code in stepper.cpp using macros - Apply standards in stepper.cpp - Use >= 0 instead of > -1 as a better semantic - Replace DUAL_Y_CARRIAGE with Y_DUAL_STEPPER_DRIVERS	2015-03-14 04:28:22 -07:00
AnHardt	44a205d9d9	Corrected Cyrillic fonts. ... Cleaned typo in language_test.h Cyrillic part.	2015-03-14 12:27:47 +01:00
chrono	4d878b9bac	Fixed path typos in README	2015-03-14 10:18:12 +00:00
chrono	12ec557a75	Added DEFAULT_TRAVEL_ACCELERATION	2015-03-14 10:14:13 +00:00
chrono	1d25d510bc	Upstream Merge Fixes	2015-03-14 09:48:30 +00:00
chrono	a89d690b77	Merge remote-tracking branch 'upstream/Development' into pr-felix	2015-03-14 09:25:43 +00:00
Scott Lahteine	cb57fc727d	Declare pid_output for PIDBEDTEMP	2015-03-13 20:19:51 -07:00
Scott Lahteine	3d6deb9bdf	Simplify manage_heater ... - Make separate get_pid_output(e) and get_pid_output_bed() function - Reduce size of manage_heater function - Hopefully work around linker errors	2015-03-13 19:49:41 -07:00
AnHardt	730497aaa1	Make use of ligatures in language_kana_utf8.h	2015-03-13 19:47:40 +01:00
AnHardt	3240d89f7d	Logic cleanup in utf_mapper.	2015-03-13 19:45:10 +01:00
alexborro	2f3c77b751	Fix decimal places in G29 Bed Equation Coeficients	2015-03-13 14:39:41 -03:00
AnHardt	96f8d20f2f	Change selection logic another time ... Automatic selection was to unflexible. Updated documentation Updated language files to new logic and documentation. Updated bdf2u8g.exe	2015-03-13 14:26:58 +01:00
Wurstnase	76da32b567	add hash-bang for python3	2015-03-13 07:44:20 +01:00
Wurstnase	2e7ba44633	some renaming for readability	2015-03-13 07:31:27 +01:00
Scott Lahteine	352aa3f4c5	Merge branch 'Development' into marlin_configurator ... Latest upstream	2015-03-12 17:12:51 -07:00
Scott Lahteine	e3ca9137b5	Fix missing temp_error declarations ... - Fix for #1591 replacing #1595	2015-03-11 16:38:42 -07:00
Wurstnase	0620267ebb	g29 auto-mode for the new G29 LRFB ... short: this script scans the first few lines from a gcode. If the line between 2 different z are greater than min_g1 this is our first layer. On this layer we search the min and max values of X and Y. With an offset we write that in a new file.	2015-03-11 23:53:28 +01:00
Scott Lahteine	08694339eb	Merge branch 'Development' into marlin_configurator ... Conflicts: Marlin/Configuration.h	2015-03-11 15:47:32 -07:00
Scott Lahteine	e4d77a6313	Merge pull request #1554 from 2PrintBeta/Development ... Macro indirection for stepper drivers + Support for TMC26X and L6470 Stepper Drivers	2015-03-11 15:31:57 -07:00
Mehmet Sutas	b373826428	Merge pull request #2 from MarlinFirmware/Development ... update	2015-03-12 00:07:39 +02:00
AnHardt	5bafb1fe1f	Add user test to language_test.h and make it default. ... Improve description in Configuration.h	2015-03-11 20:46:52 +01:00
alexborro	c0b6075f77	Fix max acceleration limits in planner ... The max acceleration limiting was in wrong place.	2015-03-11 15:08:11 -03:00
alexborro	9157cbd8f3	Add Travel Acceleration and change the M204 options ... Added option to set Travel Acceleration (non printing moves). The M204 options was a non sense (S for printing moves and T for retract moves). It has been changed to: P = Printing moves R = Retract only (no X, Y, Z) moves T = Travel (non printing) moves I will add this info o G-Code wiki in reprap.org. I also advise to put this info in Marlin next version changelog.	2015-03-11 13:19:02 -03:00
alexborro	888cf161bd	fix travel speed option for G29 ... I forgot to enclousure the variable with #ifdef	2015-03-11 10:03:32 -03:00
alexborro	af63b54562	Add travel speed option to G29 command line	2015-03-11 09:51:56 -03:00
AnHardt	817751d4b9	Added new languages, the Cyrillic display and a test language to find out your hardware.	2015-03-11 11:10:35 +01:00
AnHardt	c4b0087f7a	Insert utf_mapper.h ... Top -> down - Decide what output function is to use. - Precautions. If non of the DISPLAY_CHARSET_HD44780's is selected fall back to Japanese. - When we are not on the dogms setup a mapping table depending on display type and mapper. - If we are on dogm we use ONE To ONE mapping - except kanji. - select and define one of the mapping functions.	2015-03-11 10:55:16 +01:00
AnHardt	b60761bcff	Removed some messages that shouldn't be translated in the Japanese files. ... And made falback to kana work.	2015-03-11 10:30:38 +01:00
AnHardt	97ae3c5c6a	Corected some errors inrtoduced by a faild global replacement.	2015-03-11 10:26:36 +01:00
AnHardt	ae76b1e8a8	Changes in dogm_lcd_implementation.h in detail. ... Top -> down - We don't need the old Marlion_font package any more - we made new. - But we need information about configured fonts and the mappers. - We support Cyrillic now. - LCD_CLASS is not used in this file. LiquidCrystalRus.h is deleted anyway. - define some fonts - BIG_EDIT_FONT works only together with western languages. - Select a matching FONT for the MENUE depending on the defined language. - Number the different font-types. Wanted to avoid to store complete font-structures when changing fonts back and forth. - Marlin special symbols are now at the lower end - like in 'ultralcd_implementation_hitachi_HD44780.h' - insert the new remembering setFont function. - insert the new counting lcd_print functions. - make use of the new setFont and lcd_print functions. - On some places redefined one character long strings with chars to avoid overhead and reduce warnings.	2015-03-10 22:34:56 +01:00
alexborro	5bf42066fa	Fix typo in configuration.h	2015-03-10 15:06:34 -03:00
alexborro	8a4b62d081	Set more regular setup in configuration.h	2015-03-10 14:41:21 -03:00
AnHardt	255ca68123	Changes in ultralcd_implementation_hitachi_HD44780.h in detail ... Top -> down: We don't need LiquidCrystalRus.cpp and LiquidCrystalRus.h any more. Functionality is now in utf_mapper.h Comment on LCD_STR_BEDTEMP about behaviour in strings. Change LCD_STR_ARROW_RIGHT from "\x7E" to ">" because "\x7E" is only ARROW_RIGHT on displays with DISPLAY_CHARSET_HD44780_JAPAN. Introduce the counting UTF8 enabled lcd_print functions. Replace the old lcd.print functions and make use of them. A bit of reformatting around the changes.	2015-03-10 18:30:09 +01:00
alexborro	60ceca1bc1	Add speed configuration for home-bumping movement	2015-03-10 14:08:32 -03:00
AnHardt	6fc2ccd568	Make use of new remenbering fontswitch.	2015-03-10 18:04:03 +01:00
AnHardt	0f26f3abf2	Add a test_language. ... Will show the compleet utf8 or ASCII charset To se the second half of ASCII click on "01234..."	2015-03-10 17:59:28 +01:00
AnHardt	901cf203fe	Add legal stuff to marlin_kanji.h	2015-03-10 17:49:16 +01:00
AnHardt	2d5134b0ed	Introduce - clean - prepae language files	2015-03-10 17:46:25 +01:00
domonoky	d813090d90	Merge remote-tracking branch 'remotes/upstream/Development' into Development ... Conflicts: Marlin/Marlin_main.cpp Marlin/stepper.cpp	2015-03-10 10:46:37 +01:00
Scott Lahteine	c321c97f35	Merge pull request #1584 from galexander1/stringcleanup ... fix a handful of cases where strtod() was cast to int, instead of just using strtol()	2015-03-10 01:48:30 -07:00
maverikou	53abc5e2f1	Merge branch 'Development' into delta_auto_bed_level	2015-03-09 22:28:57 +02:00
Mehmet Sutas	956fb2d278	Merge pull request #1 from MarlinFirmware/Development ... update	2015-03-09 11:05:49 +02:00
Scott Lahteine	978dadf806	Base64 decode AJAX-fetched text properly	2015-03-08 21:54:17 -07:00
Scott Lahteine	0eae9c24bc	Merge pull request #1582 from galexander1/deltaconftypo ... fix typo in delta example config introduced in commit 697ee2d	2015-03-08 21:13:14 -07:00
Scott Lahteine	624f23f550	Merge pull request #1575 from Wurstnase/fix-controllerFan ... Fix controller fan	2015-03-08 20:36:38 -07:00
maverikou	424c747fb3	Enable M401 and M402 for deltas with allen key z-probes.	2015-03-08 09:57:38 +02:00
maverikou	0d593ab7c1	Fix debug message	2015-03-08 09:41:31 +02:00
Greg Alexander	3e8c5678f5	fix bug where, i.e., "G1X1E1" would be interpretted as "G1 X10 E1", ... because strtod() will read the E address value as if it was a base 10 exponent.	2015-03-07 21:14:34 -05:00
Greg Alexander	ed7874b4e0	M404 should not use 'N' address as parameter because 'N' is reserved for the line number	2015-03-07 17:35:06 -05:00
Greg Alexander	b9dfa5cad4	use code_value_long() instead of (int)code_value()	2015-03-07 17:33:15 -05:00
Greg Alexander	901b03d020	use strtol() instead of strtod() when an integer value is desired	2015-03-07 17:24:26 -05:00
Greg Alexander	4fba7b084f	fix typo in delta example config introduced in ... commit 697ee2dc50	2015-03-07 16:43:41 -05:00
Mehmet Sutas	cfc6a3a87a	Filament Runout Sensor Feature ... With this change a mechanical or optical switch may be used to check the availability of the filament and when the filament runs out an M600 (filament change) command is issued. This is only done while printing with an SD card. This feature was requested several times (issue #679), but the requests were not accepted since it was believed that this situation should be handled at host side. However during an SD print the control is totally on firmware and I think that during an SD print it should be handled by the firmware. The original code was posted at reprap forum (http://forums.reprap.org/read.php?1,297350) by Lazymonk. I have only corrected some bugs of the code and improved it by adding definitions to the configuration.h in order to make it more standardized.	2015-03-07 22:43:15 +02:00
maverikou	e6862700af	Add Z_RAISE_AFTER_PROBING to all config files	2015-03-07 20:55:30 +02:00
maverikou	39d255608d	Test an extra delta configuration with auto bed leveling code paths	2015-03-07 20:53:23 +02:00
maverikou	7c24b97958	Ported over Johann Rocholl's improvements for delta printers: ... - Nonlinear auto bed leveling code (includes G29, G30, Z_RAISE_AFTER_PROBING). Cleaned it up to be a delta-specific AUTO_BED_LEVELING_GRID code path. - Allen key z-probe deployment and retraction code. Cleaned it up and added safety checks.	2015-03-07 20:36:21 +02:00
Wurstnase	a5342c942e	Update Marlin_main.cpp	2015-03-07 16:47:53 +01:00
Scott Lahteine	0f3b7d5575	Update annotated configurations ... - Also update base configs	2015-03-07 01:07:40 -08:00
Scott Lahteine	c5aa56bc4d	Merge branch 'Development' into marlin_configurator ... Latest upstream commits	2015-03-06 23:00:03 -08:00
Scott Lahteine	d085725c86	More sanity-checking for ABL ... - Moved sanity-checks to Marlin_main.cpp - Applied to other configuration files - Fixed formatting of ABL output - Passing verbose level to probe_pt - Miscellaneous cleanup - Put CONFIG_STEPPERS_TOSHIBA into Configuration.h	2015-03-06 22:14:34 -08:00
Scott Lahteine	8b6766b37b	Merge branch 'Development' into marlin_configurator ... Latest upstream changes	2015-03-06 16:32:57 -08:00
Scott Lahteine	9eed8c8cf0	Make sure a ROM is selected for ULTRA_LCD	2015-03-06 15:37:54 -08:00
AnHardt	7136268273	Added 'dogm_font_data_6x10_marlin_Kanji.h' ... This is copied from http://www.thingiverse.com/thing:664397 // Japanese Original font // Version 0.1 by ichibey // // 営利目的で利用する際は、かならず許可を得てください。非営利の場合は、CCライセンスに従い使用ください。 // http://creativecommons.org/licenses/by-nc/2.1/jp/legalcode This font is very special. It uses a mixture of katakana an kanji symbols, uses multi character symbols and is only addressable by '\xxx' sequences.	2015-03-07 00:26:28 +01:00
AnHardt	16e173e167	Added 5 new font.h files to main directory. ... The former place of 'dogm_font_data_6x9_marlin.h' was in 'dogm_font_data_m0arlin.h'. Deleted 'dogm_font_data_marlin.h'.	2015-03-07 00:09:49 +01:00
Scott Lahteine	254970c92a	Merge pull request #1570 from C-o-r-E/escape_fix ... Fixes gCode handling of comments and escaped characters	2015-03-06 15:09:35 -08:00
Scott Lahteine	25dc79f124	Remove M48 credits also	2015-03-06 14:54:30 -08:00
Scott Lahteine	34e51f576f	Fix compile error in gcode_G29 ... - A redo of #1576, which missed topo_flag - Always set verbose_level	2015-03-06 14:52:05 -08:00
AnHardt	b14270b029	Added font tools	2015-03-06 23:48:55 +01:00
AnHardt	fe2bd237d5	Add font sources. ... Fonts have been created with fony.exe (http://hukka.ncn.fi/?fony) The HD44760_? fonts simulate the fonts of the character based displays. The ISO10646 fonts provide the right size of the standard fonts. Marlin_symbols contains only the the special symbols of the original marlin font.	2015-03-06 23:36:56 +01:00
Scott Lahteine	344a12bd10	Merge pull request #1571 from AnHardt/Undubble ... Undubble MSG_MIN & MSG MAX	2015-03-06 10:08:19 -08:00
Scott Lahteine	1149c24b86	More grouping, cleanup, start on overrides	2015-03-06 08:48:53 -08:00
Wurstnase	62bd734612	fix controllerFan() for inverted enable pins ... add ```^ !(n_ENABLE_ON)``` for each stepper	2015-03-06 12:01:17 +01:00
AnHardt	3024f6c706	Undubble MSG_MIN &MSG MAX	2015-03-06 00:25:44 +01:00
Gina Häußge	63b62d8d4e	Fixed in-line comments and escaping ... * "G1 X1 ; test" was not executing "G1 X1" due to never leaving comment mode. * "M117 Hello \;)" printed "Hello \" to the display due to not replacing serial_char properly. Tested with the following commands: * M117 Hello ; test => displays "Hello" on display, ignores "test" * G1 X1 ; foo => moves 1mm in X, ignores "foo" * ; test => completely ignored, not even acknowledged * M117 Hello \;) => displays "Hello ;)" on display * M117 Hello \\;) => displays "Hello \" on display, ignores ")"	2015-03-05 23:30:34 +01:00
C-o-r-E	99fb1bc3e8	Attempt to resolve #1568 and add basic escape character support	2015-03-05 15:22:37 -05:00
Scott Lahteine	fad14ae7eb	Merge branch 'Development' into marlin_configurator ... Latest upstream changes	2015-03-05 05:32:31 -08:00
Scott Lahteine	cdc38aa783	Move gcode handlers into inline functions	2015-03-05 04:27:24 -08:00
Scott Lahteine	6d9e9a6bef	Merge branch 'Development' into enhanced_g29 ... Latest upstream changes	2015-03-05 02:49:18 -08:00
Scott Lahteine	4db2179f5c	Include 4th extruder support	2015-03-05 02:37:36 -08:00
OhmEye	f90a947e65	Fix autoretract ... Autoretract was broken, looks like it was overlooked when the retracted flag was updated for multi extruders.	2015-03-04 20:28:08 -10:00
Scott Lahteine	2ef6b3d57a	Fix wrong defines, broken syntax	2015-03-04 22:24:44 -08:00
Scott Lahteine	08b722b635	Merge pull request #1555 from C-o-r-E/solenoids ... Add support for solenoid articulated extruders	2015-03-04 21:36:29 -08:00
Scott Lahteine	32744d41a9	Do sanity checking on LRFB values ... - Setting boundaries based on configured limits, contrasting with G28 (which forgets these limits?)	2015-03-04 21:32:11 -08:00
chrono	0a7d85c20e	Minor fixes	2015-03-04 12:35:32 +00:00
chrono	48e3a97a18	Removed extra encoder definitions from pins_FELIX2.h	2015-03-04 12:21:18 +00:00
Scott Lahteine	d052a3c6aa	Merge pull request #1551 from thinkyhead/redundant_encrot ... Cleanup rotary encoder encrot* defines	2015-03-04 03:22:24 -08:00
chrono	d8eeddfb93	Updated DUAL Extruder config, added README and enabled NEWPANEL by default	2015-03-04 09:59:58 +00:00
chrono	b423b90c77	Added Configuration_adv.h to examples for LCD/SD Support	2015-03-03 19:09:25 +01:00
domonoky	075507fb9a	missed one X_ENABLE_PIN	2015-03-03 11:09:56 +01:00
Scott Lahteine	dfb38874f8	Some suggested changes for #1555	2015-03-03 00:48:20 -08:00
Scott Lahteine	7f8ea7105f	Arrange ProbeAction values bitwise	2015-03-02 20:14:37 -08:00
Scott Lahteine	7684721977	Enhanced G29 ... - Adapted “Enhanced G29” code referred to in #1499 and posted at [3dprintboard.com](http://3dprintboard.com/showthread.php?3105-Auto_Bed_ Leveling-Enhanced-G29-command) - Compatible with current G29 while adding some new arguments - `V` sets the verbose level for serial out - `T` (or `V` > 2) send a Topology report to serial out - `E` works the same way as before - `P` works as before (source used `n` or `U`/`u`) - `L`, `R`, `B`, `F` work as before - Still needs sanity checking for `LRBF`	2015-03-02 20:00:17 -08:00
C-o-r-E	874d3d3fc5	Add support for solenoid articulated extruders	2015-03-02 20:07:12 -05:00
chrono	7540a81106	Minor fixes	2015-03-02 22:55:00 +01:00
chrono	a375d648c7	Merge remote-tracking branch 'upstream/Development' into Development	2015-03-02 17:21:05 +00:00
domonoky	4a7aca2736	Merge remote-tracking branch 'remotes/upstream/Development' into Development	2015-03-02 17:52:12 +01:00
alexborro	715104e477	Fix Endstop check for CoreXY bots. ... The X_Axis could not home to min while Y_Max endstop was trigged.	2015-03-02 13:36:58 -03:00
Scott Lahteine	e428e8da75	Merge pull request #1552 from thinkyhead/cleanup_cardreader ... Cleanup of cardreader.*	2015-03-02 07:57:26 -08:00
Scott Lahteine	20e59dc61e	Don't skip files starting with underscores	2015-03-02 07:56:11 -08:00
Scott Lahteine	f171656f8e	Cleanup of cardreader.* ... - Apply standards to cardreader.* - Fix minor issues with cardreader.cpp - Apply standards to some other stale regions	2015-03-02 07:06:01 -08:00
Scott Lahteine	f379edca78	Cleanup rotary encoder encrot* defines ... The encrot values are used in only one place, and don’t vary, so remove redundant references.	2015-03-02 06:42:48 -08:00
Scott Lahteine	c7cdb176c8	Merge branch 'Development' into marlin_configurator ... Latest upstream changes	2015-03-02 06:13:10 -08:00
Scott Lahteine	49f471a5fc	Merge pull request #1541 from thinkyhead/fixup_temperature ... Cleanup of temperature code	2015-03-02 05:38:10 -08:00
Scott Lahteine	f2710e11d1	Optimize initial loading, code cleanup	2015-03-02 05:23:36 -08:00
chrono	558c6313f7	Merge branch 'pr-felix' into Marlix	2015-03-02 10:27:58 +00:00
chrono	08bc723a3c	Enable PIDBED	2015-03-02 10:26:42 +00:00
chrono	e487bd642b	Updated PR to streamline integration	2015-03-02 09:49:45 +00:00
Scott Lahteine	2eeb241b42	Find fields that group together ... - Do field grouping - Tweak configurations for better grouping	2015-03-02 01:45:53 -08:00
Scott Lahteine	e30bfedce4	Fix undefined *_PROBE_BED_POSITION error	2015-03-01 19:57:35 -08:00
chrono	3eafea840d	Minor fixes in Configuration.h	2015-03-01 11:04:02 +01:00
chrono	c7fb1b70f2	Initial Configuration.h for Felix 2.0/3.0	2015-03-01 09:54:36 +00:00
chrono	2e172f38bd	Added support for Felix 2.0/3.0 printers	2015-03-01 09:16:55 +00:00
Scott Lahteine	f994729999	Parse and use dependent groups ... - Parse #if, #ifdef, etc. for rules to enable fields	2015-02-28 22:40:20 -08:00
maverikou	9b50ec6512	Panel One encoder pins	2015-02-28 10:52:15 +02:00
Scott Lahteine	838a22de64	Fix switch value method, make app global	2015-02-27 21:08:09 -08:00
Scott Lahteine	8d5839151b	Merge branch 'Development' into marlin_configurator ... Latest upstream changes	2015-02-27 20:40:23 -08:00
domonoky	443e7edef4	- Add support for L6470 Drivers. ... - Both TMC, L6470 and pin-driven drivers work. - All can be mixed and matched as needed.	2015-02-27 12:43:23 +01:00
Scott Lahteine	1db02c2891	Merge branch 'Development' into fixup_temperature ... Merge upstream changes	2015-02-26 17:25:28 -08:00
Scott Lahteine	a99470fbb0	Merge pull request #1527 from maverikou/panel_one ... Added support for PanelOne from T3P3.	2015-02-26 16:01:13 -08:00
domonoky	5727cb3ed4	Cleanup TMC Stepper a bit.	2015-02-26 12:57:46 +01:00
Scott Lahteine	a5bbd402bf	Merge pull request #1539 from AnHardt/dummysensor ... Extend the idea of dummy temperature sensors.	2015-02-26 01:29:14 -08:00
Scott Lahteine	1a7b0d9a37	Redo HAS_* macros to fix define error	2015-02-26 01:14:59 -08:00
Scott Lahteine	864dddc878	Macros to the top, a few HAS_* macros	2015-02-26 00:33:30 -08:00
alexborro	227ab8c665	Merge pull request #1503 from MarcelMo/patch-2 ... Support for simple customisable AutoZProbing area	2015-02-25 13:22:42 -03:00
Scott Lahteine	fd1ea9d56f	Move literal strings to language files	2015-02-24 23:03:08 -08:00
maverikou	8742b6bd56	Merge branch 'Development' into panel_one	2015-02-24 22:24:57 +02:00
Scott Lahteine	aa9c1f1bed	Better name for ADC macro	2015-02-24 05:38:10 -08:00
Scott Lahteine	9c9726d469	Cleanup of temperature code ... - Reduce calls to millis() - General cleanup of manage_heaters - General cleanup of pid autotune - Formatting here & there - Macros to clean up and shrink ISR code (reduced by ~364 lines)	2015-02-24 04:46:11 -08:00
AnHardt	c6d2ebe452	Extend the idea of dummy temperature sensors. ... Added a second sensor and made them configurable.	2015-02-24 11:02:16 +01:00
Scott Lahteine	c9a3eb0c1a	Spacing in calculate_volumetric_multiplier(s)	2015-02-23 20:35:18 -08:00
Scott Lahteine	2af559cca3	Shared function for menu_edit_* and menu_edit_callback_*	2015-02-23 20:31:28 -08:00
Scott Lahteine	df8c51528f	Merge branch 'Development' into cleanup_ultralcd ... Latest upstream changes	2015-02-23 20:13:08 -08:00
Scott Lahteine	517f411999	Spacing adjustment to menu_edit* macro	2015-02-23 20:11:52 -08:00
Scott Lahteine	4938ae5caf	Add required backslash for macro expansion	2015-02-23 20:10:49 -08:00
Scott Lahteine	e182cdebf9	Add required backslash for macro expansion	2015-02-23 19:54:07 -08:00
Scott Lahteine	fa4c36df68	Fix menu callback issue wrt LCD_CLICKED	2015-02-23 19:40:57 -08:00
Scott Lahteine	0cf0c20532	Optimize calculate_volumetric_multiplier	2015-02-23 18:10:35 -08:00
domonoky	38500165ea	First attempt at adding TMC Driver support. May need some cleanup.	2015-02-23 17:45:29 +01:00
domonoky	b55995aae8	Introduce a layer of macro indirection to all stepper pins. This allows other stepper drivers to redefine them, so they can use SPI/I2C instead of direct pin manipulation.	2015-02-23 16:12:35 +01:00
kieranc	8ccdac9898	Enable PID debugging for heated bed	2015-02-23 09:42:01 +01:00
kieranc	29097b0ab2	Enable PID debugging for heated bed	2015-02-23 09:41:25 +01:00
kieranc	21bd4fd6db	Enable PID debugging for heated bed	2015-02-23 09:40:53 +01:00
kieranc	fb56aad898	Enable PID debugging for heated bed	2015-02-23 09:40:29 +01:00
kieranc	08c543f8fb	Enable PID debugging for heated bed	2015-02-23 09:40:06 +01:00
kieranc	c89413db1e	Enable PID debugging for heated bed	2015-02-23 09:39:39 +01:00
kieranc	1c71e4751a	Enable PID debugging for heated bed	2015-02-23 09:39:07 +01:00
maverikou	a9e15aa503	Updated example configurations	2015-02-22 20:15:05 +02:00
Scott Lahteine	3ba47ea277	Remove test/demo multi=line code menu items	2015-02-22 10:10:37 -08:00
Scott Lahteine	c1240f23dd	Merge branch 'Development' into marlin_configurator ... Latest upstream changes	2015-02-22 10:02:25 -08:00
alexborro	a57869ba49	Dummy Thermistor Table for testing purposes ... Am I the only one who always need to change the thermistortable.h to add a dummy table?? Ok, it is done. Just set the thermistor to 999 and it will always read 25C. Great for Testing or Development purposes.	2015-02-22 11:02:04 -03:00
Maverikou	2e166f5337	Added support for PanelOne from T3P3.	2015-02-22 09:14:43 +02:00
Scott Lahteine	40ef472a25	Merge in encoder multiplier	2015-02-21 20:18:49 -08:00
Scott Lahteine	1c13cd604b	Formatting in babysteps defines	2015-02-21 18:45:10 -08:00
Scott Lahteine	3a26804d80	Adapt to latest PID code and fix typos	2015-02-21 18:41:04 -08:00
Scott Lahteine	422582da71	Prep formatting for upcoming PR	2015-02-21 18:24:16 -08:00
Scott Lahteine	27ac3e985d	Add options to example_configurations	2015-02-21 18:17:37 -08:00
Scott Lahteine	0d6a7a2df0	Merge with latest upstream changes	2015-02-21 18:13:31 -08:00
Scott Lahteine	c7a97e18b7	Merge branch 'Development' into cleanup_ultralcd ... Latest upstream changes	2015-02-21 18:04:08 -08:00
Scott Lahteine	6d5c13df74	Merge pull request #1520 from thinkyhead/fixup_temperature ... Fix typos in checkExtruderAutoFans	2015-02-21 17:53:26 -08:00
Scott Lahteine	5b9e341222	Merge pull request #1516 from thinkyhead/fixup_ramps ... Cleanup ramps boards	2015-02-21 17:51:57 -08:00
Scott Lahteine	57bc28b42c	Cleanup and fix ultralcd.cpp ... - Fix bug in lcd_control_temperature_menu - Remove test menu-item left in from multi-line command feature - Replace literals with translatable strings - Reduce lcd_preheat code redundancy - Reduce menu macro redundancy - Clean up formatting	2015-02-21 17:38:56 -08:00
Scott Lahteine	4fcd4b444e	Merge pull request #1519 from thinkyhead/fix_recent_issues ... Fix implementation of PID menu items	2015-02-21 16:43:11 -08:00
Scott Lahteine	9c35ed149d	Merge pull request #1508 from AnHardt/iss1492 ... Fix iss#1492	2015-02-21 16:26:37 -08:00
Scott Lahteine	430c4b6538	Replace missing backslash	2015-02-20 02:17:16 -08:00
Scott Lahteine	3aa5f98b64	Download all as ZIP, adjust layout on resize	2015-02-20 02:12:00 -08:00
Scott Lahteine	a8939eec28	Readability of MENU_MULTIPLIER_ITEM ... Last commit before bed.	2015-02-20 02:08:41 -08:00
Scott Lahteine	09e09b308e	Tweaky spacing adjustments	2015-02-20 01:22:56 -08:00
Scott Lahteine	e3fd3e8fa4	Fix typos in checkExtruderAutoFans	2015-02-20 00:08:59 -08:00
Scott Lahteine	c610471b0c	Add PID_PARAMS_PER_EXTRUDER conditional	2015-02-20 00:00:19 -08:00
Scott Lahteine	2d6fa9ce80	Proper implementation of PID menu items ... - Make this work per #1344	2015-02-19 23:54:06 -08:00
wgm4321	b8e79dce89	Fix compilation errors when encoder multiplier is disabled	2015-02-19 21:51:23 -05:00
wgm4321	65e1fc71be	Add encoder rate multiplier	2015-02-19 21:42:57 -05:00
Scott Lahteine	859c8d3fef	Azteeg X3 overrides too	2015-02-19 17:28:38 -08:00
Scott Lahteine	7891eacf21	Merge branch 'Development' into fixup_ramps_boards ... - Also apply cleanup for #1514	2015-02-19 17:26:22 -08:00
Scott Lahteine	1600506545	Merge remote-tracking branch 'upstream/Development' into marlin_configurator	2015-02-19 15:15:55 -08:00
Scott Lahteine	5d0c93ae10	Keep config boxes in view on wide screen	2015-02-19 03:41:41 -08:00
Scott Lahteine	335b7680c9	Tooltip code, widescreen layout, hide auto-expands ... Slightly better layout for wide screens.	2015-02-19 03:11:16 -08:00
domonoky	15b73386b5	Add pin definitions for the Boards BAM&DICE + BAM&DICE Due	2015-02-19 11:53:31 +01:00
Scott Lahteine	08c236059e	Merge pull request #1505 from thinkyhead/issue_1499 ... Bed leveling probe behavior issue?	2015-02-19 01:24:17 -08:00
Scott Lahteine	f238c7428d	Merge branch 'Development' into marlin_configurator ... Latest upstream changes	2015-02-18 21:56:17 -08:00
Scott Lahteine	da275c72ab	Cleanup Github reply.data.content before atob()	2015-02-18 21:45:38 -08:00
MagoKimbra	159196d1e9	Reset Alert message when finish M600 command	2015-02-18 21:33:38 +01:00
daid	266ff227cf	Merge pull request #1510 from docdawning/Development ... Trivial spelling correction	2015-02-17 20:59:32 +01:00
DocDawning	dfd4e74a5c	Trivial spelling correction	2015-02-17 12:37:05 -07:00
AnHardt	6cdcd6c6d1	Fix iss#1492 ... Introduced lcd_strlen() and lcd_strlen_P(). Replaced the old functions where necessary. Reworked language_ru.h. Speeded up test for zero length string in cardreader.cpp	2015-02-16 13:53:58 +01:00
Scott Lahteine	c033904693	Updated config file section markers	2015-02-15 23:25:57 -08:00
Scott Lahteine	84a87a5b1c	Fix up configs a little	2015-02-15 23:19:22 -08:00
Scott Lahteine	63a5ff7ab9	Merge pull request #1489 from tommil/Development ... Updated Finnish language file	2015-02-15 23:02:11 -08:00
Scott Lahteine	efb0491d40	Merge branch 'Development' into issue_1499 ... Merging latest upstream changes	2015-02-15 22:59:07 -08:00
Scott Lahteine	8309b4f408	Merge branch 'Development' into marlin_configurator ... Merging latest upstream changes	2015-02-15 22:58:04 -08:00
Scott Lahteine	961998cf91	Merge pull request #1496 from thinkyhead/issue_1493 ... Megatronics 3 servo pins	2015-02-15 22:00:14 -08:00
Scott Lahteine	b71322e793	Issue #1504 – K8200 Z_ENABLE_PIN ... - K8200 uses a non-standard RAMPS with Z_ENABLE=63 ?? - Assuming from previous input that 3DRAG is the same.	2015-02-15 21:56:23 -08:00
Scott Lahteine	978d114c73	Bed leveling probe behavior issue? ... The `float` keyword should not be on these vars because they conceal the outer vars, preventing them from obtaining known values before being passed in `set_bed_level_equation_3pts`. Possibly related to `Z_RAISE_BETWEEN_PROBING` not functioning.	2015-02-15 20:51:27 -08:00
Scott Lahteine	7c6236761a	Merge branch 'Development' into issue_1493 ... Merging latest upstream changes	2015-02-15 20:45:35 -08:00
Scott Lahteine	9875352dd8	Merge branch 'Development' into marlin_configurator ... Merging latest upstream changes	2015-02-15 20:44:21 -08:00
MarcelMo	d28f5b9e82	Support for simple customisable AutoZProbing area ... When probing PCB´s I had the problem that i needed auto-leveling for specific areas (it´s never the same size). Not much code, but very useful. Now I use simply G29 L5 R55 F5 B35 P3 to probe a 4x6cm PCB before milling. I used int for values... might be wrong... I hope this time I got the right development tree. (tried first with https://github.com/MarlinFirmware/Marlin/pull/1130/commits)	2015-02-15 15:58:29 +01:00
Tommi Lamberg	513ff94b89	Merge remote-tracking branch 'upstream/Development' into Development	2015-02-15 12:21:45 +02:00
Scott Lahteine	83cb702e72	Config sections, multi-field values, toggles, etc ... - Auto-detect “switchable” items where possible - Handle switchable multi-value fields - Add standard sections to config form - Add section markers to configurations - Add value options to configurations - Remove and re-add fields for loaded configs - Preserve sections across configs - Preserve non-added fields - Style added fields wider & newline by default	2015-02-14 23:44:01 -08:00
alexborro	afc737ca0c	Fix CoreXY Homing Routine. ... Fixed how stepper ISR figure it out when the head (extruder) is going to Min or Max direction. Added Homing to Max Endstops.	2015-02-13 14:38:05 -02:00
Scott Lahteine	ec53c6309a	More fields, options in config, fix tooltips	2015-02-13 03:02:56 -08:00
Scott Lahteine	68184af57b	Merge branch 'Development' into marlin_configurator ... Latest upstream commits	2015-02-12 21:59:26 -08:00
Scott Lahteine	7866fa161f	Merge pull request #1476 from Natealus/Development ... Compiling errors with 4 Extruders defined and Viki 2 Implementation	2015-02-12 16:56:55 -08:00
Natealus	ea9e49b20d	ARRAY_BY_EXTRUDERS 4th hotend PID parameters	2015-02-12 00:56:47 -07:00
Scott Lahteine	d0ad8a978c	Megatronics 3 servo pins ... - Naive implementation, assuming the data sheet pin numbers correspond to Arduino pin numbers.	2015-02-11 23:46:27 -08:00
Scott Lahteine	e74138b2be	More robust fetch code, download buttons ... - Fetch code now handles github, local, or http: access - Download button creates a time-stamped inline download - More complete error messages - Show warnings when approaching the hourly fetch quota (limit reloading!) - Added my test domain (where the _htaccess is deployed) - `_htaccess` file added to set Access-Control-Allow-Origin “*” - Marlin logo with css - Limit selectable areas to avoid annoying selections - Messages now persist until dismissed - Default repo for files set to thinkyhead, ‘marlin_configurator’ branch - Cosmetic changes	2015-02-11 04:59:07 -08:00
Tommi Lamberg	622a531d9c	Fixed error in translation	2015-02-11 08:50:48 +02:00
Tommi Lamberg	290ab42d22	Updated Finnish translations	2015-02-11 08:37:07 +02:00
Jérémie FRANCOIS	22a7985445	reverted to upstream	2015-02-11 07:12:55 +01:00
Jérémie FRANCOIS	b3bda57ca2	reverted to upstream	2015-02-11 07:12:02 +01:00
Jérémie FRANCOIS	9d75a56b56	Merge remote-tracking branch 'upstream/Development' into Development ... Conflicts: Marlin/Configuration.h Marlin/Marlin_main.cpp	2015-02-11 06:38:36 +01:00
Tommi Lamberg	0a59fee763	Merge remote-tracking branch 'upstream/Development' into Development	2015-02-11 06:53:43 +02:00
Scott Lahteine	eb5889b3da	Merge pull request #1479 from AnHardt/en_first ... #include "language_en.h" before the national language in language.h	2015-02-10 15:33:45 -08:00
kieranc	b9ed873827	Enable PID debugging for heated bed	2015-02-10 14:13:06 +01:00
kieranc	0a19109476	Enable PID debugging for heated bed	2015-02-10 14:11:44 +01:00
Tommi Lamberg	a4f939cc27	Updated Finnish language file	2015-02-10 10:48:33 +02:00
Scott Lahteine	32d4dd073f	Merge pull request #1487 from AnHardt/iss1485 ... Fix for #1485	2015-02-09 21:41:07 -08:00
AnHardt	c246026bda	Sorry.	2015-02-10 00:23:39 +01:00
AnHardt	07e488cfae	Fix for #1485	2015-02-10 00:13:46 +01:00
Souko	e7ecf14d0c	Update ultralcd_st7920_u8glib_rrd.h ... Fixed delay-times during Init. REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER won't get initialized on some Boards because delay was to short.	2015-02-09 21:46:06 +01:00
Scott Lahteine	52c3cf6d34	Fix a logging error	2015-02-09 05:07:05 -08:00
Scott Lahteine	ba24a09f24	Use api.github to get Configurations ... - Make api.github the default source for configurations - Remove configurations from the configurator - Continuation and enhancements	2015-02-09 04:34:57 -08:00
Natealus	f4b0a40abb	Additional fixes to temperature.cpp and found another missing line ... Looks like INVERT_E3_DIR was missing in the configuration.h also as I did a test compile with 4 extruders and Azteeg X3 Pro defined. So I also added those lines too. Additional formatting to make the comments line up better in that section.	2015-02-08 15:43:58 -07:00
AnHardt	3aac2df057	Now the oter way around. ... Include of language_en.h now behind national language. All "#define MSG_STR_*" now surrounded by #ifndef and #endif.	2015-02-08 20:41:20 +01:00
AnHardt	488633bf44	#include "language_en.h" before the national language in language.h ... + May decrease the workload for feature developers. They may omit to update all the language files but "language_en.h". When loading _en first, all new features give some display, but the new in English. - May throw some additional warnings about redefinition during compile.	2015-02-08 14:26:24 +01:00
AnHardt	8e92729141	Make display language configurable in Configuration.h	2015-02-08 13:45:22 +01:00
Natealus	38a500d05c	Viki 2 Implementation ... I've insert the define and pointer entries for the Viki 2 and miniViki from Panucatt in all of the example configs and main config. With these additions and with pins done in the old single pin.h style...I was able to get the display working fine save for needing to turn Delta Segments per Second down. But that's a common graphics lcd issue being looked into right now. I need assistance in understanding how the new divided pins files fit together because my previous attempts at trying to get it to work appropriately didn't seem successful. This originally came from trying to find out how to swap the XYZ Min and Max Endstop pins in the Azteeg X3 Pro. It only comes with one set of connectors and they're Min Endstops. My previous experience didn't turn out well trying to tell the firmware to home to the Min Endstops so the best solution I found was to swap the pins in the firmware. If I'm missing a conflict with a setup other than delta please let me know, but it makes sense in my setup.	2015-02-08 03:14:59 -07:00
Natealus	697ee2dc50	Compiling errors with 4 Extruders defined ... Here were a few changes that I had to make/add lines for the 4th hotend. A compiling problem in the Temperature.cpp and missing lines in configuration.h and configuration_adv.h. I added these lines in all of the example configs too.	2015-02-08 01:05:05 -07:00
Jérémie FRANCOIS	85e5aa4011	Generalized enqueue_commands_P, and moved them to Marlin_main as they should	2015-02-07 23:24:20 +01:00
Scott Lahteine	4228758f1d	Clean up and improve tooltips, show the name	2015-02-07 11:58:19 -08:00
Scott Lahteine	0116320d2c	Strip slashes off the front of tooltips	2015-02-07 11:04:10 -08:00
Scott Lahteine	69240d41b0	Offset the timing of the pulsing animation	2015-02-07 10:45:56 -08:00
Scott Lahteine	78b9428f4e	Avoid capturing disabled items in comments	2015-02-07 10:34:16 -08:00
Scott Lahteine	5d159851e5	Fix positioning of tooltip	2015-02-07 09:03:00 -08:00
Scott Lahteine	c99f1de9f3	Fix tooltips blocking clicks	2015-02-07 07:39:10 -08:00
Scott Lahteine	1a548c1bc1	Find nearby comments and make them into tooltips	2015-02-07 06:20:04 -08:00
Scott Lahteine	90fa1345b0	Fix purge + refresh of define info	2015-02-07 03:02:26 -08:00
Scott Lahteine	aa67b38a44	Fan speed and 4th extruder on graphical LCD ... - Display fan speed 0-1 as “—“ and 254-255 as “100%”. - Display 4th extruder instead of the heated bed	2015-02-07 02:44:35 -08:00
Scott Lahteine	7850ae2f4f	Merge branch 'Development' into marlin_configurator ... Merge latest Development	2015-02-07 02:20:25 -08:00
Scott Lahteine	2647402095	Use info.repl in updateDefineFromField, fix regex	2015-02-07 02:04:44 -08:00
Scott Lahteine	12a3975341	Close section tag, add String.prototype.lineCount	2015-02-07 00:46:14 -08:00
Scott Lahteine	4bb72f9480	Highlight the edited line ... - Add a span to the edited text line to provide a highlight - Scroll and highlight for switch checkboxes also - Clean up initialization - More API documentation - Smarter handling of asynchronous file loading during init	2015-02-06 23:46:16 -08:00
Scott Lahteine	37c43a7ab3	Scroll to reveal on switches as well	2015-02-06 18:09:14 -08:00
Scott Lahteine	9c0adae3cd	Scroll to setting position in file when edited ... - Animate scrolling to the edited item’s position - Sanity check file drops and show warnings - Fix form init / refresh on new configuration drop - Document the API methods that get/set defines	2015-02-06 17:57:31 -08:00
Scott Lahteine	4d341bb758	Copy configs into subfolder ... Browsers may not want to load files outside the folder, but they may be okay with these relative references within the folder.	2015-02-06 14:58:47 -08:00
Scott Lahteine	72856166a9	Fix bad typo in ConfigurationStore.cpp	2015-02-06 14:43:58 -08:00
Scott Lahteine	b51204cc1c	Add fieldsets and make them into tabs	2015-02-05 20:28:39 -08:00
Scott Lahteine	56769ba4f8	Make comment/uncomment a little neater	2015-02-05 19:39:42 -08:00
Scott Lahteine	94bebf31ac	Pre-collect info about options on field init ... - When initializing fields use the configuration to determine the format - Cache the line for each option for fastest string compare / replace - Add logging levels for debugging	2015-02-05 19:30:11 -08:00
Scott Lahteine	32aaadc301	Include minimized jQuery 2.1.3	2015-02-05 11:50:42 -08:00
Scott Lahteine	53f6bbdfe0	Try a stepper for the serial port	2015-02-05 11:44:43 -08:00
Scott Lahteine	ac7a4358d6	Add a responsive file uploader ... - Specify HTML5 - Allow drag and drop for loading configurations	2015-02-05 11:14:31 -08:00
Scott Lahteine	09a385d9b0	Add "use strict" to the top.	2015-02-05 08:22:51 -08:00
Scott Lahteine	b2627200ea	Get thermistors from config, add temp sensors	2015-02-05 08:19:09 -08:00
Scott Lahteine	ef18bfdd3f	An in-place browser-based configurator utility ... - A web form with fields for configuration values - Reads and parses standard config files - Modifies configurations dynamically in-place	2015-02-05 07:05:29 -08:00
Scott Lahteine	3490a19103	Merge pull request #1466 from CONSULitAS/Development_K8200_de ... K8200: Example Configuration.h fixed	2015-02-04 17:28:04 -08:00
CONSULitAS	cfbb94a2a8	K8200: Example Configuration.h fixed ... Example Configuration.h: fixed strange white characters preventing compilation in lines 1 and 3 - oops	2015-02-04 10:35:10 +01:00
Scott Lahteine	b65c5d8ec6	Merge pull request #1464 from AnHardt/iss1448-Menu ... Unified menu selection - by hilighting - made first column avilable	2015-02-03 22:43:29 -08:00
CONSULitAS	0de5083aff	K8200: Example Configurations readme.md updated ... Example Configurations for K8200 readme.md updated * readme.md: added description for german umlaut support on LCD	2015-02-04 00:24:51 +01:00
CONSULitAS	c421ffd520	K8200: Example Configuration_adv.h back in sync ... Example Configuration_adv.h for K8200 back in sync * Configuration_adv.h: rebased and added missing changes for 4th extruder	2015-02-04 00:19:18 +01:00
CONSULitAS	0575dd10de	K8200: Example Configuration.h back in sync ... Example Configuration.h for K8200 back in sync * Configuration.h: rebased and added missing changes * Configuration.h: updated comments for K8200	2015-02-04 00:15:50 +01:00
AnHardt	f708884808	Introduced new function lcd_implementation_mark_as_selected() ... New function now drops the prechar (select character) and makes the first column usable for text. Marking the line is now constantly made by highlighting (reverse). Replaced selection code in: lcd_implementation_drawmenu_generic() _drawmenu_setting_edit_generic() _drawmenu_sd() with new function.	2015-02-03 23:35:33 +01:00
Scott Lahteine	b6ca50a2cc	Merge pull request #1463 from thinkyhead/cleanup_recent_merge ... Apply some cleanup for recent merge	2015-02-03 12:06:47 -08:00
Scott Lahteine	cc56f36870	Merge pull request #1461 from thinkyhead/issue_1453_redo ... Apply fix for M600 filament change	2015-02-03 11:52:09 -08:00
Scott Lahteine	8663f4bbaf	Apply some cleanup for recent merge ... Combine 1/(rows+1) with u8g.getHeight() to get rowHeight and just use that.	2015-02-03 11:48:49 -08:00
Scott Lahteine	0cb1029311	remove extra plan_buffer_line	2015-02-03 11:26:36 -08:00
AnHardt	9381bfe7f9	Fixes issue #1447 - Overlapping of long descriptions with values.	2015-02-03 20:15:16 +01:00
Scott Lahteine	b97a950f53	Apply fix for M600 filament change ... - Patch from #1453 for delta movement plan - Fix: Set X with code X instead of adding to X	2015-02-03 09:57:16 -08:00
AnHardt	2abf1ad940	Distribute recent changes in Configuration.h to the examples.	2015-02-03 17:59:04 +01:00
AnHardt	33f8580255	Merge branch 'lcd-width' into b-	2015-02-03 14:45:58 +01:00
AnHardt	0c24bb6cfc	Adjust LCD_WIDTH to make better use of DOGM LCDs	2015-02-03 14:21:43 +01:00
AnHardt	b1dbd765c6	Centralise definition of fonts for DOGM displays ... Prework for issue #1448 and #1447 Will merge in when pull request #1457 is in.	2015-02-03 13:10:09 +01:00
AnHardt	65642592ee	Added dualline version.	2015-02-03 12:25:36 +01:00
AnHardt	f9cc1df00b	Droped URL from bootsplash.	2015-02-03 11:14:27 +01:00
AnHardt	c20606b8d7	Replaced some literal constants with defines ... Replaced calculation to centre bitmap with fixed values. Saved 20 bytes.	2015-02-03 09:52:29 +01:00
AnHardt	3602474c25	Replace solitaire use of u8g_font_5x8 font and replace with u8g_font_6x10_marlin ... and win another 1694 bytes.	2015-02-03 09:07:57 +01:00
AnHardt	f5fd94d62a	Kick suspicious loop an win 72 bytes. ... No visible impact.	2015-02-03 08:56:00 +01:00
Scott Lahteine	b3973ed224	Fix HD44780 misspelled as HD44870	2015-02-02 22:33:58 -08:00
Scott Lahteine	d8b7f29fa2	Merge pull request #1452 from thinkyhead/fix_M200_bug ... M200 cleanup, normalization of EXTRUDER loops	2015-02-02 21:58:15 -08:00
Scott Lahteine	6d81968db5	Merge pull request #1450 from docdawning/Development ... Normalized section headers, added some headers, added help URLs for newb...	2015-02-02 21:17:06 -08:00
DocDawning	5bb3933b21	Fixed n00bsauce	2015-02-02 14:18:53 -07:00
DocDawning	d109cd940b	Normalized all configuration files to include my new section headers and the like.	2015-02-02 14:11:21 -07:00
DocDawning	055c4beaf9	Normalized section headers, added some headers, added help URLs for newbies	2015-02-02 14:11:09 -07:00
Scott Lahteine	9dc5de6166	Hide code that makes veteran geeks go "aha!"	2015-02-02 05:55:55 -08:00
Scott Lahteine	bd387068bb	Apply loops for extruders elsewhere also	2015-02-02 05:27:27 -08:00
Scott Lahteine	4a146d584b	Loop, since the pending feature can use an array	2015-02-02 05:16:17 -08:00
Scott Lahteine	bca884bf72	Realized it's not a bug, but cleanup code anyway	2015-02-02 04:41:31 -08:00
AnHardt	2dd43a82b1	Ups. #else added	2015-02-01 14:16:35 +01:00
AnHardt	26e55471f8	Update example configurations.	2015-02-01 13:46:32 +01:00
AnHardt	85385be132	Removed now automatic define of DISPLAY_CHARSET_DOGM + improved description.	2015-02-01 13:33:25 +01:00
AnHardt	0e40408ee5	Make exemplaric use of new display charsets in language_en.h and languag_de.h	2015-02-01 13:20:58 +01:00
AnHardt	8dce5a6644	Improve new charset featur. ... Select DOGM-displays automaticly. Give hint where to find charsets. Add '²' and '³' characters.	2015-02-01 13:09:59 +01:00
Scott Lahteine	c009c81e65	make marlin-main the default	2015-01-31 23:11:28 -08:00
Scott Lahteine	f4ebc02555	marlin url	2015-01-31 23:09:12 -08:00
Scott Lahteine	0af9a0bf57	url to firmware downloads	2015-01-31 22:19:45 -08:00
Scott Lahteine	5f8dd92905	toss in a fix for .ru	2015-01-31 21:58:38 -08:00
Scott Lahteine	3f3ad9b3ad	typo	2015-01-31 21:42:53 -08:00
Scott Lahteine	07639053fb	Add support for BQ Prusa i3 "Hephestos"	2015-01-31 21:38:30 -08:00
Philip Schell	fb7c636ecf	Avoid compiling error ... Only a missing ","... now it will compile again	2015-02-01 01:33:04 +01:00
alexborro	787d6fb61a	Update RUMBA pins file ... Add FAN1_PIN and SERVO0_PIN	2015-01-31 18:03:28 -02:00
Scott Lahteine	5fd5105d44	Merge pull request #1439 from clefranc/Development ... Fix nozzle in temperature menu	2015-01-30 19:05:45 -08:00
AnHardt	76bf93efcb	Revert "get STR_THERMOMETER from ultralcd_implementation_hitachi_HD44780.h" ... This reverts commit 4d5b0e2037.	2015-01-30 22:42:44 +01:00
AnHardt	4d5b0e2037	get STR_THERMOMETER from ultralcd_implementation_hitachi_HD44780.h	2015-01-30 22:20:10 +01:00
Christian Lefrançois	33408a4dfc	Update ultralcd.cpp ... Fix number of nozzle displayed in temperature menu.	2015-01-30 11:16:13 -05:00
AnHardt	6e6e3cf443	merged https://github.com/MarlinFirmware/Marlin.git	2015-01-30 11:05:29 +01:00
AnHardt	b3ca430a20	Inducted the defined placeholders in the translation table.	2015-01-30 10:35:14 +01:00
AnHardt	e045034c3f	Included Configuration.h to read the defined charsets. ... Defined the charsets plus a default.	2015-01-30 10:31:58 +01:00
AnHardt	27c638803e	Defined three charsets.	2015-01-30 10:28:22 +01:00
Scott Lahteine	073c59c50a	Clean up some formatting ... - Also partial cleanup of Marlin_main.cpp with a smidgen of Doxygen.	2015-01-29 18:52:21 -08:00
AnHardt	9a4d4b3a2f	translated Deltamenu	2015-01-29 13:19:32 +01:00
AnHardt	8aa6487b4b	MSG_ENDSTOP_ABORT = 'Endstop abort' > 'Endstop Abbr. Ein'	2015-01-29 13:12:55 +01:00
AnHardt	666ad7106b	Translated redundand: define MSG_INIT_SDCARD and MSG_CNG_SDCARD	2015-01-29 13:09:12 +01:00
AnHardt	e5c45fbe8c	Infoscreen messages end with a '.' if not to long. ... MSG_NO_MOVE = 'Kein Zug.' > 'Motoren Eingesch.' hat mich grau Haare gekostet. Die englisch Meldung will sagen - Du kannst jetz am Extruder arbeiten, die Achsen sind bockiert, die Motoren sperren die Achsen weil sie unter Strom stehen, weil sie eingeschaltet sind.	2015-01-29 13:02:21 +01:00
AnHardt	1e22137e27	MSG_STOP_PRINT = 'Druck stoppen' > 'SD-Druck Abbruch' ... to work out that this can't be resumed.	2015-01-29 12:41:46 +01:00
AnHardt	05d2ebd118	MSG_WATCH > 'Beobachten' > 'Info'	2015-01-29 12:29:31 +01:00
AnHardt	06cba91c39	eye candy 2	2015-01-29 12:26:21 +01:00
AnHardt	9352c9547f	MSG_SPEED = 'Geschw' > 'Geschw.'	2015-01-29 12:13:44 +01:00
AnHardt	0dfb0162f3	eye candy.	2015-01-29 12:07:01 +01:00
AnHardt	7222b27501	MSG_MOVE_AXIS = 'Achsen bewegen' > 'Bewegen'. Is Extruder an axis?	2015-01-29 12:02:58 +01:00
AnHardt	a6f808c9b1	remove unused #define MSG_RETRACT	2015-01-29 11:58:50 +01:00
AnHardt	152fa579f5	MSG_SWITCH_PS_OFF = 'Switch Power Off' -> 'Netzteil Aus'	2015-01-29 11:55:36 +01:00
AnHardt	7a32b742f3	MSG_SWITCH_PS_ON = 'Switch Power On' ->'Netzteil Ein'	2015-01-29 11:50:51 +01:00
AnHardt	4e176d2ce8	MSG_SET_ORIGIN = 'Setze Nullpunkt' ->'Setze Null hier'	2015-01-29 11:45:18 +01:00
AnHardt	1f8c8ad3ed	MSG_SET_HOME_OFFSETS = 'Set home offsets' ->'Setze Home hier'	2015-01-29 11:39:35 +01:00
AnHardt	0e8836ce5e	MSG_AUTO_HOME = 'Auto Nullpunkt' ->'Home'	2015-01-29 11:36:07 +01:00
AnHardt	56d3e6615d	MSG_DISABLE_STEPPERS = 'Stepper abschalt.' -> 'Motoren Aus'#	2015-01-29 11:19:10 +01:00
Scott Lahteine	1258980832	Merge pull request #1429 from bq/Development ... Add bq Witbox 3D printer	2015-01-29 01:14:18 -08:00
Victor Andueza	766762a4dc	Change url link	2015-01-29 09:28:50 +01:00
Scott Lahteine	7df9ca051c	Merge pull request #1428 from thinkyhead/issue_1388_eeprom ... Make EEPROM storage consistent	2015-01-28 22:58:04 -08:00
Scott Lahteine	fe3810f073	yeah, what he said	2015-01-28 22:27:15 -08:00
Scott Lahteine	6137bbd484	use eeprom read correctly	2015-01-28 22:10:31 -08:00
Scott Lahteine	9bc9051405	Flag EEPROM write errors on serial output ... - Also adds a language string for the error. - Also adds SERIAL_EOL as an alias for SERIAL_ECHOLN(“”)	2015-01-28 21:19:51 -08:00
Scott Lahteine	ff99ca3040	Fix alignment of Restore following PIDTEMP ... Should be reading 4 x 4 PID values instead of 4 x 3	2015-01-28 20:48:32 -08:00
Philip Schell	6c285930cb	Fixing wrong pin to heater extruder 2 <-> 3 ... Extruder 2 and 3 was swapped	2015-01-28 23:57:22 +01:00
Victor Andueza	0d4ce27b79	Add pins_WITBOX file	2015-01-28 17:26:50 +01:00
Victor Andueza	13118cde33	Add bq Witbox 3D printer	2015-01-28 16:52:36 +01:00
Scott Lahteine	093fedfde8	Make EEPROM storage consistent ... Update ConfigurationStore to always write dummy values for disabled options, including FWRETRACT, DELTA, and SCARA. Update the EEPROM version to “V15.” Also fixes a buffer overrun with axis_scaling in Config_ResetDefault.	2015-01-28 01:08:48 -08:00
Scott Lahteine	34377ee512	Merge pull request #1427 from thinkyhead/fewer_preheat_strings ... Remove language strings that only add a number	2015-01-27 22:10:08 -08:00
Scott Lahteine	7378a7fef4	Merge pull request #1408 from thinkyhead/cleanup_servo ... Formatting cleanup of quiet sources	2015-01-27 22:09:04 -08:00
Scott Lahteine	5fbef6bed2	Merge pull request #1409 from thinkyhead/rename_lastnr ... Rename lastnr to autostart_index and...	2015-01-27 22:07:23 -08:00
Scott Lahteine	53eea611b8	Fix MSG_NOZZLE	2015-01-27 22:00:32 -08:00
Scott Lahteine	d7211a5324	Changes for Portuguese too	2015-01-27 21:53:08 -08:00
Scott Lahteine	0a21727c0a	Portuguese (pt) and Brazilian Portuguese (pt-br)	2015-01-27 21:45:21 -08:00
Scott Lahteine	c90f2e77d8	Remove language strings that only add a number ... This won’t reduce the string storage in the end, but it makes the language files smaller. Also removed remaining unused strings.	2015-01-27 21:36:58 -08:00
Scott Lahteine	2ce4a102ee	Add support for Megatronics 3 a la #1426	2015-01-27 15:54:46 -08:00
Scott Lahteine	ae4b348d77	Make sure _Ex_PINS is defined ... Also fix analogInputToDigitalPin so it uses proper C hex notation	2015-01-27 15:36:47 -08:00
Scott Lahteine	80be6f3f91	tweak tweak	2015-01-27 15:36:47 -08:00
Scott Lahteine	ebe78cb36f	tweak	2015-01-27 15:36:47 -08:00
Scott Lahteine	82474fef8a	Max endstop pins disabled by configuration ... There’s no need to ask users to uncomment Max Endstop pins when they have them. These will be set to -1 later if the endstop option is disabled.	2015-01-27 15:33:21 -08:00
Scott Lahteine	8045e4d60d	Add support for 4th extruder ... #1405 includes some changes to pins.h for a 4th extruder. This commit applies those changes. It also deals with a possible problem with SENSITIVE_PINS.	2015-01-27 15:33:21 -08:00
Scott Lahteine	df4f3e7712	cleanup	2015-01-27 15:32:34 -08:00
Scott Lahteine	b6ecbd8cc4	cleanup	2015-01-27 15:32:34 -08:00