SunRed/Marlin-Artillery-M600
Archived
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
This repository has been archived on 2022-01-28. You can view files and clone it, but cannot push or open issues or pull requests.
Marlin-Artillery-M600/Marlin/src/inc/SanityCheck.h

3028 lines
139 KiB
C
Raw Normal View History

Make SanityCheck.h a catch-all for obsolete configs
2016-07-26 21:32:16 +02:00
/**
* Marlin 3D Printer Firmware
(c) 2020
2020-02-03 15:00:57 +01:00
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
Make SanityCheck.h a catch-all for obsolete configs
2016-07-26 21:32:16 +02:00
*
* Based on Sprinter and grbl.
Tweaky change from (C) to (c)
2019-06-28 06:57:50 +02:00
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
Make SanityCheck.h a catch-all for obsolete configs
2016-07-26 21:32:16 +02:00
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
Followup to menu refactor. TMC warnings, sanity. (#12288) - Followup fixes for menu refactor - Fix TMC sanity checks, unused var warnings
2018-11-01 22:13:33 +01:00
#pragma once
Make SanityCheck.h a catch-all for obsolete configs
2016-07-26 21:32:16 +02:00
/**
* SanityCheck.h
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
*
* Test configuration values for errors at compile-time.
*/
/**
Throw an error for gcc before 4.7
2016-12-20 02:12:58 +01:00
* Require gcc 4.7 or newer (first included with Arduino 1.6.8) for C++11 features.
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
*/
Throw an error for gcc before 4.7
2016-12-20 02:12:58 +01:00
#if __cplusplus < 201103L
#error "Marlin requires C++11 support (gcc >= 4.7, Arduino IDE >= 1.6.8). Please upgrade your toolchain."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
More useful ENABLED / DISABLED macros (#17054)
2020-03-08 05:20:41 +01:00
// Make sure macros aren't borked
#define TEST1
#define TEST2 1
#define TEST3 0
#define TEST4 true
#if ENABLED(TEST0)
#error "ENABLED is borked!"
#endif
#if DISABLED(TEST1)
#error "DISABLED is borked!"
#endif
#if !ENABLED(TEST2)
#error "ENABLED is borked!"
#endif
#if ENABLED(TEST3)
#error "ENABLED is borked!"
#endif
#if DISABLED(TEST4)
#error "DISABLED is borked!"
#endif
#if !ANY(TEST1, TEST2, TEST3, TEST4) || ANY(TEST0, TEST3)
#error "ANY is borked!"
#endif
#if DISABLED(TEST0, TEST1, TEST2, TEST4)
#error "DISABLED is borked!"
#endif
#undef TEST1
#undef TEST2
#undef TEST3
#undef TEST4
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
/**
Add support for an RGBW LED
2017-04-11 19:58:55 +02:00
* We try our best to include sanity checks for all changed configuration
* directives because users have a tendency to use outdated config files with
* the bleeding-edge source code, but sometimes this is not enough. This check
* forces a minimum config file revision. Otherwise Marlin will not build.
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
*/
Fix the sanity-check for config versions
2018-05-06 16:33:09 +02:00
#define HEXIFY(H) _CAT(0x,H)
#if !defined(CONFIGURATION_H_VERSION) || HEXIFY(CONFIGURATION_H_VERSION) < HEXIFY(REQUIRED_CONFIGURATION_H_VERSION)
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#error "You are using an old Configuration.h file, update it before building Marlin."
#endif
Fix the sanity-check for config versions
2018-05-06 16:33:09 +02:00
#if !defined(CONFIGURATION_ADV_H_VERSION) || HEXIFY(CONFIGURATION_ADV_H_VERSION) < HEXIFY(REQUIRED_CONFIGURATION_ADV_H_VERSION)
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#error "You are using an old Configuration_adv.h file, update it before building Marlin."
#endif
Undefine sanity check tests when done
2019-06-08 13:28:49 +02:00
#undef HEXIFY
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
Sanity check homing bumps
2016-09-23 00:10:20 +02:00
/**
Move tests for old symbols to the top of sanity check
2016-08-05 06:03:55 +02:00
* Warnings for old configurations
*/
Add sanity-check for MOTHERBOARD
2018-06-10 11:03:27 +02:00
#ifndef MOTHERBOARD
#error "MOTHERBOARD is required. Please update your configuration."
#elif !defined(X_BED_SIZE) || !defined(Y_BED_SIZE)
Add a sanity check for valid bed size
2017-08-05 10:28:30 +02:00
#error "X_BED_SIZE and Y_BED_SIZE are now required! Please update your configuration."
Add bed size as a configuration option
2017-07-22 05:54:39 +02:00
#elif WATCH_TEMP_PERIOD > 500
Move tests for old symbols to the top of sanity check
2016-08-05 06:03:55 +02:00
#error "WATCH_TEMP_PERIOD now uses seconds instead of milliseconds."
#elif DISABLED(THERMAL_PROTECTION_HOTENDS) && (defined(WATCH_TEMP_PERIOD) || defined(THERMAL_PROTECTION_PERIOD))
#error "Thermal Runaway Protection for hotends is now enabled with THERMAL_PROTECTION_HOTENDS."
#elif DISABLED(THERMAL_PROTECTION_BED) && defined(THERMAL_PROTECTION_BED_PERIOD)
#error "Thermal Runaway Protection for the bed is now enabled with THERMAL_PROTECTION_BED."
Implement reversed CORE options
2016-11-06 05:47:38 +01:00
#elif (CORE_IS_XZ || CORE_IS_YZ) && ENABLED(Z_LATE_ENABLE)
#error "Z_LATE_ENABLE can't be used with COREXZ, COREZX, COREYZ, or COREZY."
Move tests for old symbols to the top of sanity check
2016-08-05 06:03:55 +02:00
#elif defined(X_HOME_RETRACT_MM)
#error "[XYZ]_HOME_RETRACT_MM settings have been renamed [XYZ]_HOME_BUMP_MM."
#elif defined(SDCARDDETECTINVERTED)
SD_DETECT_INVERTED => SD_DETECT_STATE (#17112)
2020-03-10 21:43:06 +01:00
#error "SDCARDDETECTINVERTED is now SD_DETECT_STATE (HIGH). Please update your configuration."
#elif defined(SD_DETECT_INVERTED)
#error "SD_DETECT_INVERTED is now SD_DETECT_STATE (HIGH). Please update your configuration."
Move tests for old symbols to the top of sanity check
2016-08-05 06:03:55 +02:00
#elif defined(BTENABLED)
#error "BTENABLED is now BLUETOOTH. Please update your configuration."
#elif defined(CUSTOM_MENDEL_NAME)
#error "CUSTOM_MENDEL_NAME is now CUSTOM_MACHINE_NAME. Please update your configuration."
#elif defined(HAS_AUTOMATIC_VERSIONING)
Vendor version override (#14189) Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
2019-10-15 19:32:44 +02:00
#error "HAS_AUTOMATIC_VERSIONING is now CUSTOM_VERSION_FILE. Please update your configuration."
#elif defined(USE_AUTOMATIC_VERSIONING)
#error "USE_AUTOMATIC_VERSIONING is now CUSTOM_VERSION_FILE. Please update your configuration."
Move tests for old symbols to the top of sanity check
2016-08-05 06:03:55 +02:00
#elif defined(SDSLOW)
#error "SDSLOW deprecated. Set SPI_SPEED to SPI_HALF_SPEED instead."
#elif defined(SDEXTRASLOW)
#error "SDEXTRASLOW deprecated. Set SPI_SPEED to SPI_QUARTER_SPEED instead."
#elif defined(FILAMENT_SENSOR)
Pulldown pin mode support (#9701) Implemented for LPC1768.
2018-02-19 02:26:23 +01:00
#error "FILAMENT_SENSOR is now FILAMENT_WIDTH_SENSOR. Please update your configuration."
#elif defined(ENDSTOPPULLUP_FIL_RUNOUT)
#error "ENDSTOPPULLUP_FIL_RUNOUT is now FIL_RUNOUT_PULLUP. Please update your configuration."
Move tests for old symbols to the top of sanity check
2016-08-05 06:03:55 +02:00
#elif defined(DISABLE_MAX_ENDSTOPS) || defined(DISABLE_MIN_ENDSTOPS)
#error "DISABLE_MAX_ENDSTOPS and DISABLE_MIN_ENDSTOPS deprecated. Use individual USE_*_PLUG options instead."
#elif defined(LANGUAGE_INCLUDE)
#error "LANGUAGE_INCLUDE has been replaced by LCD_LANGUAGE. Please update your configuration."
#elif defined(EXTRUDER_OFFSET_X) || defined(EXTRUDER_OFFSET_Y)
#error "EXTRUDER_OFFSET_[XY] is deprecated. Use HOTEND_OFFSET_[XY] instead."
#elif defined(PID_PARAMS_PER_EXTRUDER)
#error "PID_PARAMS_PER_EXTRUDER is deprecated. Use PID_PARAMS_PER_HOTEND instead."
#elif defined(EXTRUDER_WATTS) || defined(BED_WATTS)
#error "EXTRUDER_WATTS and BED_WATTS are deprecated. Remove them from your configuration."
#elif defined(SERVO_ENDSTOP_ANGLES)
#error "SERVO_ENDSTOP_ANGLES is deprecated. Use Z_SERVO_ANGLES instead."
#elif defined(X_ENDSTOP_SERVO_NR) || defined(Y_ENDSTOP_SERVO_NR)
#error "X_ENDSTOP_SERVO_NR and Y_ENDSTOP_SERVO_NR are deprecated and should be removed."
Z Endstop Servo => Z Probe Servo
2018-04-02 06:54:12 +02:00
#elif defined(Z_ENDSTOP_SERVO_NR)
#error "Z_ENDSTOP_SERVO_NR is now Z_PROBE_SERVO_NR. Please update your configuration."
max_jerk array, DEFAULT_XYJERK => DEFAULT_[XY]JERK
2016-10-02 11:37:13 +02:00
#elif defined(DEFAULT_XYJERK)
#error "DEFAULT_XYJERK is deprecated. Use DEFAULT_XJERK and DEFAULT_YJERK instead."
Move tests for old symbols to the top of sanity check
2016-08-05 06:03:55 +02:00
#elif defined(XY_TRAVEL_SPEED)
#error "XY_TRAVEL_SPEED is deprecated. Use XY_PROBE_SPEED instead."
#elif defined(PROBE_SERVO_DEACTIVATION_DELAY)
#error "PROBE_SERVO_DEACTIVATION_DELAY is deprecated. Use DEACTIVATE_SERVOS_AFTER_MOVE instead."
#elif defined(SERVO_DEACTIVATION_DELAY)
#error "SERVO_DEACTIVATION_DELAY is deprecated. Use SERVO_DELAY instead."
#elif ENABLED(FILAMENTCHANGEENABLE)
Unify M600 and M125 pause features (#6407) * Unify M600 and M125 pause features * Cleanup per thinkyhead's comments * Rename filament_change_menu_response to advanced_pause_menu_response * Include HAS_BED_PROBE in QUIET_PROBING * Update gMax example file * is_idle() is out of scope without the braces * Convert FT-i3-2020 to Advance Pause names... * Allow pause even if not printing
2017-05-26 20:01:02 +02:00
#error "FILAMENTCHANGEENABLE is now ADVANCED_PAUSE_FEATURE. Please update your configuration."
#elif ENABLED(FILAMENT_CHANGE_FEATURE)
#error "FILAMENT_CHANGE_FEATURE is now ADVANCED_PAUSE_FEATURE. Please update your configuration."
[2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8866) * Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
2017-12-25 08:38:06 +01:00
#elif defined(FILAMENT_CHANGE_X_POS) || defined(FILAMENT_CHANGE_Y_POS)
#error "FILAMENT_CHANGE_[XY]_POS is now set with NOZZLE_PARK_POINT. Please update your configuration."
#elif defined(FILAMENT_CHANGE_Z_ADD)
#error "FILAMENT_CHANGE_Z_ADD is now set with NOZZLE_PARK_POINT. Please update your configuration."
#elif defined(FILAMENT_CHANGE_XY_FEEDRATE)
#error "FILAMENT_CHANGE_XY_FEEDRATE is now NOZZLE_PARK_XY_FEEDRATE. Please update your configuration."
#elif defined(FILAMENT_CHANGE_Z_FEEDRATE)
#error "FILAMENT_CHANGE_Z_FEEDRATE is now NOZZLE_PARK_Z_FEEDRATE. Please update your configuration."
#elif defined(PAUSE_PARK_X_POS) || defined(PAUSE_PARK_Y_POS)
#error "PAUSE_PARK_[XY]_POS is now set with NOZZLE_PARK_POINT. Please update your configuration."
#elif defined(PAUSE_PARK_Z_ADD)
#error "PAUSE_PARK_Z_ADD is now set with NOZZLE_PARK_POINT. Please update your configuration."
#elif defined(PAUSE_PARK_XY_FEEDRATE)
#error "PAUSE_PARK_XY_FEEDRATE is now NOZZLE_PARK_XY_FEEDRATE. Please update your configuration."
#elif defined(PAUSE_PARK_Z_FEEDRATE)
#error "PAUSE_PARK_Z_FEEDRATE is now NOZZLE_PARK_Z_FEEDRATE. Please update your configuration."
#elif defined(FILAMENT_CHANGE_RETRACT_FEEDRATE)
Unify M600 and M125 pause features (#6407) * Unify M600 and M125 pause features * Cleanup per thinkyhead's comments * Rename filament_change_menu_response to advanced_pause_menu_response * Include HAS_BED_PROBE in QUIET_PROBING * Update gMax example file * is_idle() is out of scope without the braces * Convert FT-i3-2020 to Advance Pause names... * Allow pause even if not printing
2017-05-26 20:01:02 +02:00
#error "FILAMENT_CHANGE_RETRACT_FEEDRATE is now PAUSE_PARK_RETRACT_FEEDRATE. Please update your configuration."
[2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8866) * Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
2017-12-25 08:38:06 +01:00
#elif defined(FILAMENT_CHANGE_RETRACT_LENGTH)
Unify M600 and M125 pause features (#6407) * Unify M600 and M125 pause features * Cleanup per thinkyhead's comments * Rename filament_change_menu_response to advanced_pause_menu_response * Include HAS_BED_PROBE in QUIET_PROBING * Update gMax example file * is_idle() is out of scope without the braces * Convert FT-i3-2020 to Advance Pause names... * Allow pause even if not printing
2017-05-26 20:01:02 +02:00
#error "FILAMENT_CHANGE_RETRACT_LENGTH is now PAUSE_PARK_RETRACT_LENGTH. Please update your configuration."
[2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8866) * Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
2017-12-25 08:38:06 +01:00
#elif defined(FILAMENT_CHANGE_EXTRUDE_FEEDRATE)
Correction to sanity check
2018-04-21 01:16:17 +02:00
#error "FILAMENT_CHANGE_EXTRUDE_FEEDRATE is now ADVANCED_PAUSE_PURGE_FEEDRATE. Please update your configuration."
Add Filament Change accelerations
2018-03-20 19:19:10 +01:00
#elif defined(ADVANCED_PAUSE_EXTRUDE_FEEDRATE)
#error "ADVANCED_PAUSE_EXTRUDE_FEEDRATE is now ADVANCED_PAUSE_PURGE_FEEDRATE. Please update your configuration."
[2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8866) * Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
2017-12-25 08:38:06 +01:00
#elif defined(FILAMENT_CHANGE_EXTRUDE_LENGTH)
Add Filament Change accelerations
2018-03-20 19:19:10 +01:00
#error "FILAMENT_CHANGE_EXTRUDE_LENGTH is now ADVANCED_PAUSE_PURGE_LENGTH. Please update your configuration."
#elif defined(ADVANCED_PAUSE_EXTRUDE_LENGTH)
#error "ADVANCED_PAUSE_EXTRUDE_LENGTH is now ADVANCED_PAUSE_PURGE_LENGTH. Please update your configuration."
[2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8866) * Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
2017-12-25 08:38:06 +01:00
#elif defined(FILAMENT_CHANGE_NOZZLE_TIMEOUT)
Unify M600 and M125 pause features (#6407) * Unify M600 and M125 pause features * Cleanup per thinkyhead's comments * Rename filament_change_menu_response to advanced_pause_menu_response * Include HAS_BED_PROBE in QUIET_PROBING * Update gMax example file * is_idle() is out of scope without the braces * Convert FT-i3-2020 to Advance Pause names... * Allow pause even if not printing
2017-05-26 20:01:02 +02:00
#error "FILAMENT_CHANGE_NOZZLE_TIMEOUT is now PAUSE_PARK_NOZZLE_TIMEOUT. Please update your configuration."
Add M701/M702 Filament Load/Unload, M603
2018-01-04 12:06:34 +01:00
#elif defined(FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS)
#error "FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS is now FILAMENT_CHANGE_ALERT_BEEPS. Please update your configuration."
Fix an old sanity check
2018-11-14 08:15:24 +01:00
#elif defined(FILAMENT_CHANGE_NO_STEPPER_TIMEOUT)
Unify M600 and M125 pause features (#6407) * Unify M600 and M125 pause features * Cleanup per thinkyhead's comments * Rename filament_change_menu_response to advanced_pause_menu_response * Include HAS_BED_PROBE in QUIET_PROBING * Update gMax example file * is_idle() is out of scope without the braces * Convert FT-i3-2020 to Advance Pause names... * Allow pause even if not printing
2017-05-26 20:01:02 +02:00
#error "FILAMENT_CHANGE_NO_STEPPER_TIMEOUT is now PAUSE_PARK_NO_STEPPER_TIMEOUT. Please update your configuration."
Move tests for old symbols to the top of sanity check
2016-08-05 06:03:55 +02:00
#elif defined(PLA_PREHEAT_HOTEND_TEMP)
#error "PLA_PREHEAT_HOTEND_TEMP is now PREHEAT_1_TEMP_HOTEND. Please update your configuration."
#elif defined(PLA_PREHEAT_HPB_TEMP)
#error "PLA_PREHEAT_HPB_TEMP is now PREHEAT_1_TEMP_BED. Please update your configuration."
#elif defined(PLA_PREHEAT_FAN_SPEED)
#error "PLA_PREHEAT_FAN_SPEED is now PREHEAT_1_FAN_SPEED. Please update your configuration."
#elif defined(ABS_PREHEAT_HOTEND_TEMP)
#error "ABS_PREHEAT_HOTEND_TEMP is now PREHEAT_2_TEMP_HOTEND. Please update your configuration."
#elif defined(ABS_PREHEAT_HPB_TEMP)
#error "ABS_PREHEAT_HPB_TEMP is now PREHEAT_2_TEMP_BED. Please update your configuration."
#elif defined(ABS_PREHEAT_FAN_SPEED)
#error "ABS_PREHEAT_FAN_SPEED is now PREHEAT_2_FAN_SPEED. Please update your configuration."
#elif defined(ENDSTOPS_ONLY_FOR_HOMING)
#error "ENDSTOPS_ONLY_FOR_HOMING is deprecated. Use (disable) ENDSTOPS_ALWAYS_ON_DEFAULT instead."
#elif defined(HOMING_FEEDRATE)
#error "HOMING_FEEDRATE is deprecated. Set individual rates with HOMING_FEEDRATE_(XY|Z|E) instead."
#elif defined(MANUAL_HOME_POSITIONS)
#error "MANUAL_HOME_POSITIONS is deprecated. Set MANUAL_[XYZ]_HOME_POS as-needed instead."
#elif defined(PID_ADD_EXTRUSION_RATE)
#error "PID_ADD_EXTRUSION_RATE is now PID_EXTRUSION_SCALING and is DISABLED by default. Are you sure you want to use this option? Please update your configuration."
#elif defined(Z_RAISE_BEFORE_HOMING)
#error "Z_RAISE_BEFORE_HOMING is now Z_HOMING_HEIGHT. Please update your configuration."
#elif defined(MIN_Z_HEIGHT_FOR_HOMING)
#error "MIN_Z_HEIGHT_FOR_HOMING is now Z_HOMING_HEIGHT. Please update your configuration."
#elif defined(Z_RAISE_BEFORE_PROBING) || defined(Z_RAISE_AFTER_PROBING)
[2.0.x] Add Z_AFTER_PROBING option (#10058) Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
2018-03-11 19:07:55 +01:00
#error "Z_RAISE_(BEFORE|AFTER)_PROBING are deprecated. Use Z_CLEARANCE_DEPLOY_PROBE and Z_AFTER_PROBING instead."
Move tests for old symbols to the top of sanity check
2016-08-05 06:03:55 +02:00
#elif defined(Z_RAISE_PROBE_DEPLOY_STOW) || defined(Z_RAISE_BETWEEN_PROBINGS)
Try on "CLEARANCE" for size
2016-09-20 10:49:42 +02:00
#error "Z_RAISE_PROBE_DEPLOY_STOW and Z_RAISE_BETWEEN_PROBINGS are now Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES. Please update your configuration."
Revert to Probe Raise rather than Probe Height
2016-09-14 03:25:12 +02:00
#elif defined(Z_PROBE_DEPLOY_HEIGHT) || defined(Z_PROBE_TRAVEL_HEIGHT)
Try on "CLEARANCE" for size
2016-09-20 10:49:42 +02:00
#error "Z_PROBE_DEPLOY_HEIGHT and Z_PROBE_TRAVEL_HEIGHT are now Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES. Please update your configuration."
Add a "manual" option for ABL
2017-03-13 06:24:22 +01:00
#elif defined(MANUAL_BED_LEVELING)
#error "MANUAL_BED_LEVELING is now LCD_BED_LEVELING. Please update your configuration."
Replace MBL Z hacking
2017-03-15 09:20:41 +01:00
#elif defined(MESH_HOME_SEARCH_Z)
Add a "manual" option for ABL
2017-03-13 06:24:22 +01:00
#error "MESH_HOME_SEARCH_Z is now LCD_PROBE_Z_RANGE. Please update your configuration."
#elif defined(MANUAL_PROBE_Z_RANGE)
#error "MANUAL_PROBE_Z_RANGE is now LCD_PROBE_Z_RANGE. Please update your configuration."
MIN_SEGMENTS_FOR_MOVE => MIN_STEPS_PER_SEGMENT Follow-up to #4666
2016-08-21 15:56:03 +02:00
#elif !defined(MIN_STEPS_PER_SEGMENT)
Improve verbiage of dropsegments sanity error
2016-08-29 02:40:32 +02:00
#error Please replace "const int dropsegments" with "#define MIN_STEPS_PER_SEGMENT" (and increase by 1) in Configuration_adv.h.
[2.0.x] G33 MIN_STEPS_PER_SEGMENT (#10386)
2018-04-13 03:22:29 +02:00
#elif MIN_STEPS_PER_SEGMENT <= 0
#error "MIN_STEPS_PER_SEGMENT must be at least 1. Please update your Configuration_adv.h."
PREVENT_DANGEROUS_EXTRUDE => PREVENT_COLD_EXTRUSION Also improve the documentation of this and related options, and set EXTRUDE_MINTEMP to 170 everywhere.
2016-08-21 06:34:24 +02:00
#elif defined(PREVENT_DANGEROUS_EXTRUDE)
#error "PREVENT_DANGEROUS_EXTRUDE is now PREVENT_COLD_EXTRUSION. Please update your configuration."
Patch SCARA example config
2016-09-12 03:11:39 +02:00
#elif defined(SCARA)
#error "SCARA is now MORGAN_SCARA. Please update your configuration."
Enable ABL by type, support bilinear on cartesian
2016-09-26 06:17:39 +02:00
#elif defined(ENABLE_AUTO_BED_LEVELING)
#error "ENABLE_AUTO_BED_LEVELING is deprecated. Specify AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR, or AUTO_BED_LEVELING_3POINT."
#elif defined(AUTO_BED_LEVELING_FEATURE)
#error "AUTO_BED_LEVELING_FEATURE is deprecated. Specify AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR, or AUTO_BED_LEVELING_3POINT."
#elif defined(ABL_GRID_POINTS)
Use same config name for all mesh dimensions
2017-04-06 05:29:44 +02:00
#error "ABL_GRID_POINTS is now GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y. Please update your configuration."
ABL_GRID_POINTS_* => ABL_GRID_MAX_POINTS_*
2016-12-10 06:38:28 +01:00
#elif defined(ABL_GRID_POINTS_X) || defined(ABL_GRID_POINTS_Y)
Use same config name for all mesh dimensions
2017-04-06 05:29:44 +02:00
#error "ABL_GRID_POINTS_[XY] is now GRID_MAX_POINTS_[XY]. Please update your configuration."
#elif defined(ABL_GRID_MAX_POINTS_X) || defined(ABL_GRID_MAX_POINTS_Y)
#error "ABL_GRID_MAX_POINTS_[XY] is now GRID_MAX_POINTS_[XY]. Please update your configuration."
#elif defined(MESH_NUM_X_POINTS) || defined(MESH_NUM_Y_POINTS)
#error "MESH_NUM_[XY]_POINTS is now GRID_MAX_POINTS_[XY]. Please update your configuration."
#elif defined(UBL_MESH_NUM_X_POINTS) || defined(UBL_MESH_NUM_Y_POINTS)
#error "UBL_MESH_NUM_[XY]_POINTS is now GRID_MAX_POINTS_[XY]. Please update your configuration."
Config option G26_MESH_VALIDATION for all meshes
2017-11-24 00:49:05 +01:00
#elif defined(UBL_G26_MESH_VALIDATION)
#error "UBL_G26_MESH_VALIDATION is now G26_MESH_VALIDATION. Please update your configuration."
Revert some changes to UBL
2017-04-02 03:06:12 +02:00
#elif defined(UBL_MESH_EDIT_ENABLED)
Config option G26_MESH_VALIDATION for all meshes
2017-11-24 00:49:05 +01:00
#error "UBL_MESH_EDIT_ENABLED is now G26_MESH_VALIDATION. Please update your configuration."
Update Configuration.h files to better names (#6814) Changed UBL_G26_MESH_EDITING to UBL_G26_MESH_VALIDATION Added UBL_MESH_EDIT_MOVES_Z to prepare for that change (coming next)
2017-05-21 18:10:22 +02:00
#elif defined(UBL_MESH_EDITING)
Config option G26_MESH_VALIDATION for all meshes
2017-11-24 00:49:05 +01:00
#error "UBL_MESH_EDITING is now G26_MESH_VALIDATION. Please update your configuration."
Misc. Clean Up (#6822) * Misc. Clean Up Mostly UBL related clean up. - But fixed a bug in the thermistortables. - Made G26 more responsive to user aborts. - Added sanity checks for older name for UBL_MESH_VALIDATION. - Made G29 P4 able to edit invalidated mesh points - Restore a reasonable Fade Height for UBL when creating new state information - Get UBL's Topology Map to look a little bit better - Make sure the user doesn't see a blank screen when doing Mesh Editing. * Huh??? GitHub Desktop screwed up! * get the planner object in scope * Fix out of scope z_fade_height * Travis timed out... I need a change so I can force a new commit and sync.
2017-05-22 05:09:51 +02:00
#elif defined(BLTOUCH_HEATERS_OFF)
#error "BLTOUCH_HEATERS_OFF is now PROBING_HEATERS_OFF. Please update your configuration."
BLTouch v3 / 3DTouch Interoperability & performance (#13814)
2019-05-08 04:25:54 +02:00
#elif defined(BLTOUCH_V3)
#error "BLTOUCH_V3 is obsolete. Please update your configuration."
#elif defined(BLTOUCH_FORCE_OPEN_DRAIN_MODE)
#error "BLTOUCH_FORCE_OPEN_DRAIN_MODE is obsolete. Please update your configuration."
Use _PIN suffix on some pins
2016-09-24 23:36:12 +02:00
#elif defined(BEEPER)
#error "BEEPER is now BEEPER_PIN. Please update your pins definitions."
#elif defined(SDCARDDETECT)
#error "SDCARDDETECT is now SD_DETECT_PIN. Please update your pins definitions."
#elif defined(STAT_LED_RED) || defined(STAT_LED_BLUE)
#error "STAT_LED_RED/STAT_LED_BLUE are now STAT_LED_RED_PIN/STAT_LED_BLUE_PIN. Please update your pins definitions."
#elif defined(LCD_PIN_BL)
#error "LCD_PIN_BL is now LCD_BACKLIGHT_PIN. Please update your pins definitions."
#elif defined(LCD_PIN_RESET)
#error "LCD_PIN_RESET is now LCD_RESET_PIN. Please update your pins definitions."
Sanity check for the renamed options
2016-10-23 03:20:59 +02:00
#elif defined(EXTRUDER_0_AUTO_FAN_PIN) || defined(EXTRUDER_1_AUTO_FAN_PIN) || defined(EXTRUDER_2_AUTO_FAN_PIN) || defined(EXTRUDER_3_AUTO_FAN_PIN)
#error "EXTRUDER_[0123]_AUTO_FAN_PIN is now E[0123]_AUTO_FAN_PIN. Please update your Configuration_adv.h."
Add HAS_FAN and others
2020-04-27 11:41:18 +02:00
#elif defined(PID_FAN_SCALING) && !HAS_FAN
Add PID_FAN_SCALING option (#15585)
2019-11-26 10:34:43 +01:00
#error "PID_FAN_SCALING needs at least one fan enabled."
Software endstop options as simple switches
2017-03-17 02:03:57 +01:00
#elif defined(min_software_endstops) || defined(max_software_endstops)
#error "(min|max)_software_endstops are now (MIN|MAX)_SOFTWARE_ENDSTOPS. Please update your configuration."
Add support for SOLENOID_PROBE
2017-04-14 23:36:02 +02:00
#elif ENABLED(Z_PROBE_SLED) && defined(SLED_PIN)
#error "Replace SLED_PIN with SOL1_PIN (applies to both Z_PROBE_SLED and SOLENOID_PROBE)."
Implement USE_CONTROLLER_FAN as a feature
2017-05-03 03:18:31 +02:00
#elif defined(CONTROLLERFAN_PIN)
#error "CONTROLLERFAN_PIN is now CONTROLLER_FAN_PIN, enabled with USE_CONTROLLER_FAN. Please update your Configuration_adv.h."
New Controller Fan options and M710 gcode (#17149)
2020-03-18 19:41:12 +01:00
#elif defined(CONTROLLERFAN_SPEED)
#error "CONTROLLERFAN_SPEED is now CONTROLLERFAN_SPEED_ACTIVE. Please update your Configuration_adv.h."
Sanity check CONTROLLERFAN_SECS
2020-03-24 22:40:40 +01:00
#elif defined(CONTROLLERFAN_SECS)
#error "CONTROLLERFAN_SECS is now CONTROLLERFAN_IDLE_TIME. Please update your Configuration_adv.h."
Replace MIN_RETRACT with MIN_AUTORETRACT, MAX_AUTORETRACT
2017-07-24 19:13:25 +02:00
#elif defined(MIN_RETRACT)
#error "MIN_RETRACT is now MIN_AUTORETRACT and MAX_AUTORETRACT. Please update your Configuration_adv.h."
Remove legacy ADVANCE feature
2017-10-09 11:25:18 +02:00
#elif defined(ADVANCE)
#error "ADVANCE was removed in Marlin 1.1.6. Please use LIN_ADVANCE."
[2.0.x] LIN_ADVANCE v1.5 (#9712)
2018-02-23 07:53:29 +01:00
#elif defined(LIN_ADVANCE_E_D_RATIO)
#error "LIN_ADVANCE (1.5) no longer uses LIN_ADVANCE_E_D_RATIO. Check your configuration."
Different NEOPIXEL types Same as #7728 but for 2.0.x, Lot of cleanup and remove references in whole code to other "LED files" than leds.h. Now will be much easier to add next drivers/libraries. e.g. FastLED. But bad news, currently FastLED is suporting only RGB devices (no RGBW)
2017-10-05 13:45:36 +02:00
#elif defined(NEOPIXEL_RGBW_LED)
#error "NEOPIXEL_RGBW_LED is now NEOPIXEL_LED. Please update your configuration."
MIN_PROBE_EDGE replaces DELTA_PROBEABLE_RADIUS
2018-03-19 07:18:57 +01:00
#elif ENABLED(DELTA) && defined(DELTA_PROBEABLE_RADIUS)
Probe margin. Bump config version (#18140) Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-06-03 03:41:50 +02:00
#error "Remove DELTA_PROBEABLE_RADIUS and use PROBING_MARGIN to inset the probe area instead."
Improve Delta probing / calibration (#15887)
2019-11-21 10:26:00 +01:00
#elif ENABLED(DELTA) && defined(DELTA_CALIBRATION_RADIUS)
Probe margin. Bump config version (#18140) Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-06-03 03:41:50 +02:00
#error "Remove DELTA_CALIBRATION_RADIUS and use PROBING_MARGIN to inset the probe area instead."
Apply physical limits to mesh bounds
2017-10-19 08:39:39 +02:00
#elif defined(UBL_MESH_INSET)
#error "UBL_MESH_INSET is now just MESH_INSET. Please update your configuration."
HAL cleanups
2019-02-20 13:13:07 +01:00
#elif defined(UBL_MESH_MIN_X) || defined(UBL_MESH_MIN_Y) || defined(UBL_MESH_MAX_X) || defined(UBL_MESH_MAX_Y)
Apply physical limits to mesh bounds
2017-10-19 08:39:39 +02:00
#error "UBL_MESH_(MIN|MAX)_[XY] is now just MESH_(MIN|MAX)_[XY]. Please update your configuration."
Consolidate 3-point leveling point options
2018-03-19 07:22:21 +01:00
#elif defined(ABL_PROBE_PT_1_X) || defined(ABL_PROBE_PT_1_Y) || defined(ABL_PROBE_PT_2_X) || defined(ABL_PROBE_PT_2_Y) || defined(ABL_PROBE_PT_3_X) || defined(ABL_PROBE_PT_3_Y)
M851 XY 3 point followup (incomplete) (#15361)
2019-09-25 09:43:41 +02:00
#error "ABL_PROBE_PT_[123]_[XY] is no longer required. Please remove it from Configuration.h."
Consolidate 3-point leveling point options
2018-03-19 07:22:21 +01:00
#elif defined(UBL_PROBE_PT_1_X) || defined(UBL_PROBE_PT_1_Y) || defined(UBL_PROBE_PT_2_X) || defined(UBL_PROBE_PT_2_Y) || defined(UBL_PROBE_PT_3_X) || defined(UBL_PROBE_PT_3_Y)
M851 XY 3 point followup (incomplete) (#15361)
2019-09-25 09:43:41 +02:00
#error "UBL_PROBE_PT_[123]_[XY] is no longer required. Please remove it from Configuration.h."
Probe margin. Bump config version (#18140) Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-06-03 03:41:50 +02:00
#elif defined(MIN_PROBE_EDGE)
#error "MIN_PROBE_EDGE is now called PROBING_MARGIN. Please update your configuration."
#elif defined(MIN_PROBE_EDGE_LEFT)
#error "MIN_PROBE_EDGE_LEFT is now called PROBING_MARGIN_LEFT. Please update your configuration."
#elif defined(MIN_PROBE_EDGE_RIGHT)
#error "MIN_PROBE_EDGE_RIGHT is now called PROBING_MARGIN_RIGHT. Please update your configuration."
#elif defined(MIN_PROBE_EDGE_FRONT)
#error "MIN_PROBE_EDGE_FRONT is now called PROBING_MARGIN_FRONT. Please update your configuration."
#elif defined(MIN_PROBE_EDGE_BACK)
#error "MIN_PROBE_EDGE_BACK is now called PROBING_MARGIN_BACK. Please update your configuration."
Revive and improve DELTA probe bounds, LRFB options (#15372)
2019-09-28 08:19:11 +02:00
#elif defined(LEFT_PROBE_BED_POSITION)
Probe margin. Bump config version (#18140) Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-06-03 03:41:50 +02:00
#error "LEFT_PROBE_BED_POSITION is obsolete. Set a margin with PROBING_MARGIN or PROBING_MARGIN_LEFT instead."
Revive and improve DELTA probe bounds, LRFB options (#15372)
2019-09-28 08:19:11 +02:00
#elif defined(RIGHT_PROBE_BED_POSITION)
Probe margin. Bump config version (#18140) Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-06-03 03:41:50 +02:00
#error "RIGHT_PROBE_BED_POSITION is obsolete. Set a margin with PROBING_MARGIN or PROBING_MARGIN_RIGHT instead."
Revive and improve DELTA probe bounds, LRFB options (#15372)
2019-09-28 08:19:11 +02:00
#elif defined(FRONT_PROBE_BED_POSITION)
Probe margin. Bump config version (#18140) Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-06-03 03:41:50 +02:00
#error "FRONT_PROBE_BED_POSITION is obsolete. Set a margin with PROBING_MARGIN or PROBING_MARGIN_FRONT instead."
Revive and improve DELTA probe bounds, LRFB options (#15372)
2019-09-28 08:19:11 +02:00
#elif defined(BACK_PROBE_BED_POSITION)
Probe margin. Bump config version (#18140) Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-06-03 03:41:50 +02:00
#error "BACK_PROBE_BED_POSITION is obsolete. Set a margin with PROBING_MARGIN or PROBING_MARGIN_BACK instead."
Followup for MESH_EDIT_GFX_OVERLAY
2017-11-24 20:35:08 +01:00
#elif defined(ENABLE_MESH_EDIT_GFX_OVERLAY)
#error "ENABLE_MESH_EDIT_GFX_OVERLAY is now MESH_EDIT_GFX_OVERLAY. Please update your configuration."
#elif defined(BABYSTEP_ZPROBE_GFX_REVERSE)
#error "BABYSTEP_ZPROBE_GFX_REVERSE is now set by OVERLAY_GFX_REVERSE. Please update your configurations."
Add an option to segment leveled moves
2017-11-29 22:30:42 +01:00
#elif defined(UBL_GRANULAR_SEGMENTATION_FOR_CARTESIAN)
#error "UBL_GRANULAR_SEGMENTATION_FOR_CARTESIAN is now SEGMENT_LEVELED_MOVES. Please update your configuration."
Change K1 to required option PID_K1
2017-12-01 16:08:30 +01:00
#elif HAS_PID_HEATING && (defined(K1) || !defined(PID_K1))
#error "K1 is now PID_K1. Please update your configuration."
PROBE_DOUBLE_TOUCH => MULTIPLE_PROBING
2017-12-07 23:33:51 +01:00
#elif defined(PROBE_DOUBLE_TOUCH)
#error "PROBE_DOUBLE_TOUCH is now MULTIPLE_PROBING. Please update your configuration."
Adding support for the Tronxy and Zonestar LCD
2017-12-16 02:05:57 +01:00
#elif defined(ANET_KEYPAD_LCD)
#error "ANET_KEYPAD_LCD is now ZONESTAR_LCD. Please update your configuration."
Add 20x4 option for Sainsmart LCD (#9740)
2018-02-21 07:46:25 +01:00
#elif defined(LCD_I2C_SAINSMART_YWROBOT)
#error "LCD_I2C_SAINSMART_YWROBOT is now LCD_SAINSMART_I2C_(1602|2004). Please update your configuration."
A single setting to validate filament width
2017-12-20 04:26:06 +01:00
#elif defined(MEASURED_LOWER_LIMIT) || defined(MEASURED_UPPER_LIMIT)
#error "MEASURED_(UPPER|LOWER)_LIMIT is now FILWIDTH_ERROR_MARGIN. Please update your configuration."
Improve TMC config organization, naming
2018-03-13 08:06:40 +01:00
#elif defined(HAVE_TMCDRIVER)
Simplify stepper driver per-axis selection
2018-07-14 13:13:06 +02:00
#error "HAVE_TMCDRIVER is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h."
Trinamic: Split stealthChop, improve driver monitoring, etc. (#12582)
2018-12-07 22:34:21 +01:00
#elif defined(STEALTHCHOP)
#error "STEALTHCHOP is now STEALTHCHOP_(XY|Z|E). Please update your Configuration_adv.h."
Simplify stepper driver per-axis selection
2018-07-14 13:13:06 +02:00
#elif defined(HAVE_TMC26X)
#error "HAVE_TMC26X is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h."
#elif defined(HAVE_TMC2130)
#error "HAVE_TMC2130 is now [AXIS]_DRIVER_TYPE TMC2130. Please update your Configuration.h."
Add TMC2209 support (#14249)
2019-06-20 22:47:50 +02:00
#elif defined(HAVE_TMC2208)
#error "HAVE_TMC2208 is now [AXIS]_DRIVER_TYPE TMC2208. Please update your Configuration.h."
Simplify stepper driver per-axis selection
2018-07-14 13:13:06 +02:00
#elif defined(HAVE_L6470DRIVER)
#error "HAVE_L6470DRIVER is now [AXIS]_DRIVER_TYPE L6470. Please update your Configuration.h."
Add support for Triple-Z steppers/endstops
2018-06-19 18:55:49 +02:00
#elif defined(X_IS_TMC) || defined(X2_IS_TMC) || defined(Y_IS_TMC) || defined(Y2_IS_TMC) || defined(Z_IS_TMC) || defined(Z2_IS_TMC) || defined(Z3_IS_TMC) \
BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (#16595)
2020-01-25 09:13:39 +01:00
|| defined(E0_IS_TMC) || defined(E1_IS_TMC) || defined(E2_IS_TMC) || defined(E3_IS_TMC) || defined(E4_IS_TMC) || defined(E5_IS_TMC) || defined(E6_IS_TMC) || defined(E7_IS_TMC)
Simplify stepper driver per-axis selection
2018-07-14 13:13:06 +02:00
#error "[AXIS]_IS_TMC is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h."
Add support for Triple-Z steppers/endstops
2018-06-19 18:55:49 +02:00
#elif defined(X_IS_TMC26X) || defined(X2_IS_TMC26X) || defined(Y_IS_TMC26X) || defined(Y2_IS_TMC26X) || defined(Z_IS_TMC26X) || defined(Z2_IS_TMC26X) || defined(Z3_IS_TMC26X) \
BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (#16595)
2020-01-25 09:13:39 +01:00
|| defined(E0_IS_TMC26X) || defined(E1_IS_TMC26X) || defined(E2_IS_TMC26X) || defined(E3_IS_TMC26X) || defined(E4_IS_TMC26X) || defined(E5_IS_TMC26X) || defined(E6_IS_TMC26X) || defined(E7_IS_TMC26X)
Simplify stepper driver per-axis selection
2018-07-14 13:13:06 +02:00
#error "[AXIS]_IS_TMC26X is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h."
Add support for Triple-Z steppers/endstops
2018-06-19 18:55:49 +02:00
#elif defined(X_IS_TMC2130) || defined(X2_IS_TMC2130) || defined(Y_IS_TMC2130) || defined(Y2_IS_TMC2130) || defined(Z_IS_TMC2130) || defined(Z2_IS_TMC2130) || defined(Z3_IS_TMC2130) \
BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (#16595)
2020-01-25 09:13:39 +01:00
|| defined(E0_IS_TMC2130) || defined(E1_IS_TMC2130) || defined(E2_IS_TMC2130) || defined(E3_IS_TMC2130) || defined(E4_IS_TMC2130) || defined(E5_IS_TMC2130) || defined(E6_IS_TMC2130) || defined(E7_IS_TMC2130)
Simplify stepper driver per-axis selection
2018-07-14 13:13:06 +02:00
#error "[AXIS]_IS_TMC2130 is now [AXIS]_DRIVER_TYPE TMC2130. Please update your Configuration.h."
Add support for Triple-Z steppers/endstops
2018-06-19 18:55:49 +02:00
#elif defined(X_IS_TMC2208) || defined(X2_IS_TMC2208) || defined(Y_IS_TMC2208) || defined(Y2_IS_TMC2208) || defined(Z_IS_TMC2208) || defined(Z2_IS_TMC2208) || defined(Z3_IS_TMC2208) \
BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (#16595)
2020-01-25 09:13:39 +01:00
|| defined(E0_IS_TMC2208) || defined(E1_IS_TMC2208) || defined(E2_IS_TMC2208) || defined(E3_IS_TMC2208) || defined(E4_IS_TMC2208) || defined(E5_IS_TMC2208) || defined(E6_IS_TMC2208) || defined(E7_IS_TMC2208)
Simplify stepper driver per-axis selection
2018-07-14 13:13:06 +02:00
#error "[AXIS]_IS_TMC2208 is now [AXIS]_DRIVER_TYPE TMC2208. Please update your Configuration.h."
Add support for Triple-Z steppers/endstops
2018-06-19 18:55:49 +02:00
#elif defined(X_IS_L6470) || defined(X2_IS_L6470) || defined(Y_IS_L6470) || defined(Y2_IS_L6470) || defined(Z_IS_L6470) || defined(Z2_IS_L6470) || defined(Z3_IS_L6470) \
BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (#16595)
2020-01-25 09:13:39 +01:00
|| defined(E0_IS_L6470) || defined(E1_IS_L6470) || defined(E2_IS_L6470) || defined(E3_IS_L6470) || defined(E4_IS_L6470) || defined(E5_IS_L6470) || defined(E6_IS_L6470) || defined(E7_IS_L6470)
Simplify stepper driver per-axis selection
2018-07-14 13:13:06 +02:00
#error "[AXIS]_IS_L6470 is now [AXIS]_DRIVER_TYPE L6470. Please update your Configuration.h."
Sanity check SENSORLESS_HOMING
2018-02-05 01:44:10 +01:00
#elif defined(AUTOMATIC_CURRENT_CONTROL)
#error "AUTOMATIC_CURRENT_CONTROL is now MONITOR_DRIVER_STATUS. Please update your configuration."
Add Filament Change accelerations
2018-03-20 19:19:10 +01:00
#elif defined(FILAMENT_CHANGE_LOAD_LENGTH)
#error "FILAMENT_CHANGE_LOAD_LENGTH is now FILAMENT_CHANGE_FAST_LOAD_LENGTH. Please update your configuration."
Corner Leveling: Add inset for each side (#16759)
2020-02-03 07:00:35 +01:00
#elif defined(LEVEL_CORNERS_INSET)
#error "LEVEL_CORNERS_INSET is now LEVEL_CORNERS_INSET_LFRB . Please update your Configuration.h."
#elif ENABLED(LEVEL_BED_CORNERS) && !defined(LEVEL_CORNERS_INSET_LFRB)
#error "LEVEL_BED_CORNERS requires LEVEL_CORNERS_INSET_LFRB values. Please update your Configuration.h."
BEZIER_JERK_CONTROL => S_CURVE_ACCELERATION
2018-05-26 09:02:39 +02:00
#elif defined(BEZIER_JERK_CONTROL)
#error "BEZIER_JERK_CONTROL is now S_CURVE_ACCELERATION. Please update your configuration."
Add HAS_JUNCTION_DEVIATION
2020-04-24 03:49:11 +02:00
#elif HAS_JUNCTION_DEVIATION && defined(JUNCTION_DEVIATION_FACTOR)
Rename Junction Deviation options
2018-05-26 09:19:28 +02:00
#error "JUNCTION_DEVIATION_FACTOR is now JUNCTION_DEVIATION_MM. Please update your configuration."
#elif defined(JUNCTION_ACCELERATION_FACTOR)
Fix/Improve junction deviation - Respect axis max acceleration limits instead of forcing a fixed acceleration value. - The `junction_unit_vec` ensures proper handling of entry and exit speeds even when the axes involved have different limits.
2018-06-01 03:09:53 +02:00
#error "JUNCTION_ACCELERATION_FACTOR is obsolete. Delete it from Configuration_adv.h."
#elif defined(JUNCTION_ACCELERATION)
#error "JUNCTION_ACCELERATION is obsolete. Delete it from Configuration_adv.h."
[2.0.x] Tweaks and additions for MAX7219 (#11034)
2018-06-19 05:04:03 +02:00
#elif defined(MAX7219_DEBUG_STEPPER_HEAD)
#error "MAX7219_DEBUG_STEPPER_HEAD is now MAX7219_DEBUG_PLANNER_HEAD. Please update your configuration."
#elif defined(MAX7219_DEBUG_STEPPER_TAIL)
#error "MAX7219_DEBUG_STEPPER_TAIL is now MAX7219_DEBUG_PLANNER_TAIL. Please update your configuration."
#elif defined(MAX7219_DEBUG_STEPPER_QUEUE)
#error "MAX7219_DEBUG_STEPPER_QUEUE is now MAX7219_DEBUG_PLANNER_QUEUE. Please update your configuration."
Expose: Homing Validation and Endstop Noise Threshold (#11912)
2018-09-25 03:59:12 +02:00
#elif defined(ENDSTOP_NOISE_FILTER)
#error "ENDSTOP_NOISE_FILTER is now ENDSTOP_NOISE_THRESHOLD [2-7]. Please update your configuration."
RETRACT_ZLIFT => RETRACT_ZRAISE
2018-10-16 23:46:24 +02:00
#elif defined(RETRACT_ZLIFT)
#error "RETRACT_ZLIFT is now RETRACT_ZRAISE. Please update your Configuration_adv.h."
Single Z raise value for all tool-changing / parking (#12090) * Universal tool-change Z lift * Add TOOLCHANGE_ZRAISE to example configs * Park/unpark changes to example configs * Implement DEBUG_DXC_MODE
2018-10-17 18:11:41 +02:00
#elif defined(TOOLCHANGE_PARK_ZLIFT) || defined(TOOLCHANGE_UNPARK_ZLIFT)
#error "TOOLCHANGE_PARK_ZLIFT and TOOLCHANGE_UNPARK_ZLIFT are now TOOLCHANGE_ZRAISE. Please update your configuration."
#elif defined(SINGLENOZZLE_TOOLCHANGE_ZRAISE)
#error "SINGLENOZZLE_TOOLCHANGE_ZRAISE is now TOOLCHANGE_ZRAISE. Please update your configuration."
Combine more tool-change variables (#12137)
2018-11-07 04:52:20 +01:00
#elif defined(SINGLENOZZLE_SWAP_LENGTH)
#error "SINGLENOZZLE_SWAP_LENGTH is now TOOLCHANGE_FIL_SWAP_LENGTH. Please update your configuration."
#elif defined(SINGLENOZZLE_SWAP_RETRACT_SPEED)
#error "SINGLENOZZLE_SWAP_RETRACT_SPEED is now TOOLCHANGE_FIL_SWAP_RETRACT_SPEED. Please update your configuration."
#elif defined(SINGLENOZZLE_SWAP_PRIME_SPEED)
#error "SINGLENOZZLE_SWAP_PRIME_SPEED is now TOOLCHANGE_FIL_SWAP_PRIME_SPEED. Please update your configuration."
#elif defined(SINGLENOZZLE_SWAP_PARK)
#error "SINGLENOZZLE_SWAP_PARK is now TOOLCHANGE_PARK. Please update your configuration."
#elif defined(SINGLENOZZLE_TOOLCHANGE_XY)
#error "SINGLENOZZLE_TOOLCHANGE_XY is now TOOLCHANGE_PARK_XY. Please update your configuration."
#elif defined(SINGLENOZZLE_PARK_XY_FEEDRATE)
#error "SINGLENOZZLE_PARK_XY_FEEDRATE is now TOOLCHANGE_PARK_XY_FEEDRATE. Please update your configuration."
Single Z raise value for all tool-changing / parking (#12090) * Universal tool-change Z lift * Add TOOLCHANGE_ZRAISE to example configs * Park/unpark changes to example configs * Implement DEBUG_DXC_MODE
2018-10-17 18:11:41 +02:00
#elif defined(PARKING_EXTRUDER_SECURITY_RAISE)
#error "PARKING_EXTRUDER_SECURITY_RAISE is now TOOLCHANGE_ZRAISE. Please update your configuration."
#elif defined(SWITCHING_TOOLHEAD_SECURITY_RAISE)
#error "SWITCHING_TOOLHEAD_SECURITY_RAISE is now TOOLCHANGE_ZRAISE. Please update your configuration."
G0 feedrate may be fixed or variable (#12172)
2018-10-25 17:35:16 +02:00
#elif defined(G0_FEEDRATE) && G0_FEEDRATE == 0
#error "G0_FEEDRATE is now used to set the G0 feedrate. Please update your configuration."
Add a mesh edit menu for MBL / ABL-Bilinear
2018-06-06 04:57:25 +02:00
#elif defined(MBL_Z_STEP)
#error "MBL_Z_STEP is now MESH_EDIT_Z_STEP. Please update your configuration."
Update and fix CHDK
2018-11-05 08:08:40 +01:00
#elif defined(CHDK)
#error "CHDK is now CHDK_PIN. Please update your Configuration_adv.h."
Support two MAX6675 thermocouples (#8686)
2018-11-17 01:20:33 +01:00
#elif defined(MAX6675_SS)
#error "MAX6675_SS is now MAX6675_SS_PIN. Please update your configuration and/or pins."
#elif defined(MAX6675_SS2)
#error "MAX6675_SS2 is now MAX6675_SS2_PIN. Please update your configuration and/or pins."
Singleton for cutting tools (#14429)
2019-06-28 06:06:49 +02:00
#elif defined(SPINDLE_LASER_ENABLE)
#error "SPINDLE_LASER_ENABLE is now SPINDLE_FEATURE or LASER_FEATURE. Please update your Configuration_adv.h."
SPINDLE_LASER_ENABLE => SPINDLE_LASER_ENA
2019-04-09 00:52:33 +02:00
#elif defined(SPINDLE_LASER_ENABLE_PIN)
Singleton for cutting tools (#14429)
2019-06-28 06:06:49 +02:00
#error "SPINDLE_LASER_ENABLE_PIN is now SPINDLE_LASER_ENA_PIN. Please update your Configuration_adv.h and/or pins."
#elif defined(SPINDLE_DIR_CHANGE)
#error "SPINDLE_DIR_CHANGE is now SPINDLE_CHANGE_DIR. Please update your Configuration_adv.h."
#elif defined(SPINDLE_STOP_ON_DIR_CHANGE)
#error "SPINDLE_STOP_ON_DIR_CHANGE is now SPINDLE_CHANGE_DIR_STOP. Please update your Configuration_adv.h."
#elif defined(SPINDLE_LASER_ENABLE_INVERT)
#error "SPINDLE_LASER_ENABLE_INVERT is now SPINDLE_LASER_ACTIVE_HIGH. Please update your Configuration_adv.h."
Improvements for Laser / Spindle (#17661)
2020-06-08 07:47:31 +02:00
#elif defined(CUTTER_POWER_DISPLAY)
#error "CUTTER_POWER_DISPLAY is now CUTTER_POWER_UNIT. Please update your Configuration_adv.h."
Move and update heated chamber settings (#13671) Co-Authored-By: the-real-orca <stephan.veigl@gmail.com>
2019-04-12 22:38:10 +02:00
#elif defined(CHAMBER_HEATER_PIN)
#error "CHAMBER_HEATER_PIN is now HEATER_CHAMBER_PIN. Please update your configuration and/or pins."
Remove TMC_Z_CALIBRATION in favor of Z_STEPPER_AUTO_ALIGN
2019-01-11 23:56:23 +01:00
#elif defined(TMC_Z_CALIBRATION)
#error "TMC_Z_CALIBRATION has been deprecated in favor of Z_STEPPER_AUTO_ALIGN. Please update your configuration."
Drop the Z_MIN_PROBE_ENDSTOP option (#13276)
2019-03-01 07:27:45 +01:00
#elif defined(Z_MIN_PROBE_ENDSTOP)
#error "Z_MIN_PROBE_ENDSTOP is no longer required. Please remove it from Configuration.h."
Single X Duplication Extension (#13373) * Multi-nozzle selective duplication * Use a bit-mask, reduce stepper_indirection.h size * Tweak the multi-nozzle duplication description * Use 'S' as a bool in M605 * Add HAS_DUPLICATION_MODE conditional * Remove '_MODE' from the option name * M605 in the style of Stacker M280 * Also include direct mask style (P)
2019-03-13 06:42:50 +01:00
#elif defined(DUAL_NOZZLE_DUPLICATION_MODE)
#error "DUAL_NOZZLE_DUPLICATION_MODE is now MULTI_NOZZLE_DUPLICATION. Please update your configuration."
Option to disable Case Light brightness control (#14165)
2019-06-07 14:23:42 +02:00
#elif defined(MENU_ITEM_CASE_LIGHT)
#error "MENU_ITEM_CASE_LIGHT is now CASE_LIGHT_MENU. Please update your configuration."
ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED => SD_ABORT_ON_ENDSTOP_HIT
2019-06-11 00:25:43 +02:00
#elif defined(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
#error "ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED is now SD_ABORT_ON_ENDSTOP_HIT. Please update your Configuration_adv.h."
Update SD card connection / sharing options (#14325)
2019-06-26 10:55:57 +02:00
#elif defined(LPC_SD_LCD) || defined(LPC_SD_ONBOARD) || defined(LPC_SD_CUSTOM_CABLE)
#error "LPC_SD_(LCD|ONBOARD|CUSTOM_CABLE) are now SDCARD_CONNECTION. Please update your Configuration_adv.h."
#elif defined(USB_SD_DISABLED)
#error "USB_SD_DISABLED is now NO_SD_HOST_DRIVE. Please update your Configuration_adv.h."
#elif defined(USB_SD_ONBOARD)
#error "USB_SD_ONBOARD is obsolete. Disable NO_SD_HOST_DRIVE instead."
Simplify power supply naming logic (#14488) Co-Authored-By: Tim Moore <tim.moore@lightbend.com> Co-Authored-By: AnHardt <github@kitelab.de>
2019-07-05 08:58:34 +02:00
#elif POWER_SUPPLY == 1
#error "Replace POWER_SUPPLY 1 by enabling PSU_CONTROL and setting PSU_ACTIVE_HIGH to 'false'."
#elif POWER_SUPPLY == 2
#error "Replace POWER_SUPPLY 2 by enabling PSU_CONTROL and setting PSU_ACTIVE_HIGH to 'true'."
#elif defined(POWER_SUPPLY)
#error "POWER_SUPPLY is now obsolete. Please remove it from Configuration.h."
More general FSMC display option
2019-07-30 11:00:51 +02:00
#elif defined(MKS_ROBIN_TFT)
#error "MKS_ROBIN_TFT is now FSMC_GRAPHICAL_TFT. Please update your configuration."
SDPOWER => SDPOWER_PIN
2019-08-02 09:19:39 +02:00
#elif defined(SDPOWER)
#error "SDPOWER is now SDPOWER_PIN. Please update your configuration and/or pins."
Invariant Marlin bootscreen (#15057)
2019-08-28 14:40:18 +02:00
#elif defined(STRING_SPLASH_LINE1) || defined(STRING_SPLASH_LINE2)
#error "STRING_SPLASH_LINE[12] are now obsolete. Please remove them from Configuration.h."
Simpler Allen Key config. Fixes, cleanups from refactor (#15256)
2019-09-14 10:05:10 +02:00
#elif defined(Z_PROBE_ALLEN_KEY_DEPLOY_1_X) || defined(Z_PROBE_ALLEN_KEY_STOW_1_X)
#error "Z_PROBE_ALLEN_KEY_(DEPLOY|STOW) coordinates are now a single setting. Please update your configuration."
Add M851 X Y probe offsets (#15202)
2019-09-25 04:29:21 +02:00
#elif defined(X_PROBE_OFFSET_FROM_EXTRUDER) || defined(Y_PROBE_OFFSET_FROM_EXTRUDER) || defined(Z_PROBE_OFFSET_FROM_EXTRUDER)
#error "[XYZ]_PROBE_OFFSET_FROM_EXTRUDER is now NOZZLE_TO_PROBE_OFFSET. Please update your configuration."
#elif defined(MIN_PROBE_X) || defined(MIN_PROBE_Y) || defined(MAX_PROBE_X) || defined(MAX_PROBE_Y)
#error "(MIN|MAX)_PROBE_[XY] are now calculated at runtime. Please remove them from Configuration.h."
Add custom types for position (#15204)
2019-09-29 11:25:39 +02:00
#elif defined(Z_STEPPER_ALIGN_X) || defined(Z_STEPPER_ALIGN_X)
#error "Z_STEPPER_ALIGN_X and Z_STEPPER_ALIGN_Y are now combined as Z_STEPPER_ALIGN_XY. Please update your Configuration_adv.h."
Enable junction deviation by default (#15481)
2019-10-09 02:42:18 +02:00
#elif defined(JUNCTION_DEVIATION)
#error "JUNCTION_DEVIATION is no longer required. (See CLASSIC_JERK). Please remove it from Configuration.h."
XY/Z Babystep Multiplicators (#15691)
2019-10-28 22:44:17 +01:00
#elif defined(BABYSTEP_MULTIPLICATOR)
#error "BABYSTEP_MULTIPLICATOR is now BABYSTEP_MULTIPLICATOR_[XY|Z]. Please update Configuration_adv.h."
LULZBOT_TOUCH_UI => TOUCH_UI_FTDI_EVE
2019-11-23 23:53:44 +01:00
#elif defined(LULZBOT_TOUCH_UI)
#error "LULZBOT_TOUCH_UI is now TOUCH_UI_FTDI_EVE. Please update your configuration."
Configurable PSU power-on delay (#16050)
2019-11-30 14:17:24 +01:00
#elif defined(PS_DEFAULT_OFF)
#error "PS_DEFAULT_OFF is now PSU_DEFAULT_OFF. Please update your configuration."
Tweak some config names
2019-12-13 05:14:36 +01:00
#elif defined(FILAMENT_UNLOAD_RETRACT_LENGTH)
#error "FILAMENT_UNLOAD_RETRACT_LENGTH is now FILAMENT_UNLOAD_PURGE_RETRACT. Please update Configuration_adv.h."
#elif defined(FILAMENT_UNLOAD_DELAY)
#error "FILAMENT_UNLOAD_DELAY is now FILAMENT_UNLOAD_PURGE_DELAY. Please update Configuration_adv.h."
HOME_USING_SPREADCYCLE is obsolete Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
2019-12-19 23:02:57 +01:00
#elif defined(HOME_USING_SPREADCYCLE)
#error "HOME_USING_SPREADCYCLE is now obsolete. Please remove it from Configuration_adv.h."
Update and fix DGUS (#16317)
2020-01-04 04:00:44 +01:00
#elif defined(DGUS_LCD)
#error "DGUS_LCD is now DGUS_LCD_UI_(ORIGIN|FYSETC|HIPRECY). Please update your configuration."
Quad Z stepper support (#16277)
2020-01-20 06:35:07 +01:00
#elif defined(X_DUAL_ENDSTOPS_ADJUSTMENT)
#error "X_DUAL_ENDSTOPS_ADJUSTMENT is now X2_ENDSTOP_ADJUSTMENT. Please update Configuration_adv.h."
#elif defined(Y_DUAL_ENDSTOPS_ADJUSTMENT)
#error "Y_DUAL_ENDSTOPS_ADJUSTMENT is now Y2_ENDSTOP_ADJUSTMENT. Please update Configuration_adv.h."
#elif defined(Z_DUAL_ENDSTOPS_ADJUSTMENT)
#error "Z_DUAL_ENDSTOPS_ADJUSTMENT is now Z2_ENDSTOP_ADJUSTMENT. Please update Configuration_adv.h."
#elif defined(Z_TRIPLE_ENDSTOPS_ADJUSTMENT2) || defined(Z_TRIPLE_ENDSTOPS_ADJUSTMENT3)
#error "Z_TRIPLE_ENDSTOPS_ADJUSTMENT[23] is now Z[23]_ENDSTOP_ADJUSTMENT. Please update Configuration_adv.h."
#elif defined(Z_QUAD_ENDSTOPS_ADJUSTMENT2) || defined(Z_QUAD_ENDSTOPS_ADJUSTMENT3) || defined(Z_QUAD_ENDSTOPS_ADJUSTMENT4)
#error "Z_QUAD_ENDSTOPS_ADJUSTMENT[234] is now Z[234]_ENDSTOP_ADJUSTMENT. Please update Configuration_adv.h."
#elif defined(Z_DUAL_STEPPER_DRIVERS)
#error "Z_DUAL_STEPPER_DRIVERS is now NUM_Z_STEPPER_DRIVERS with a value of 2. Please update Configuration_adv.h."
#elif defined(Z_TRIPLE_STEPPER_DRIVERS)
#error "Z_TRIPLE_STEPPER_DRIVERS is now NUM_Z_STEPPER_DRIVERS with a value of 3. Please update Configuration_adv.h."
#elif defined(Z_QUAD_STEPPER_DRIVERS)
#error "Z_QUAD_STEPPER_DRIVERS is now NUM_Z_STEPPER_DRIVERS with a value of 4. Please update Configuration_adv.h."
#elif defined(Z_DUAL_ENDSTOPS)
#error "Z_DUAL_ENDSTOPS is now Z_MULTI_ENDSTOPS. Please update Configuration_adv.h."
#elif defined(Z_TRIPLE_ENDSTOPS)
#error "Z_TRIPLE_ENDSTOPS is now Z_MULTI_ENDSTOPS. Please update Configuration_adv.h."
#elif defined(Z_QUAD_ENDSTOPS)
#error "Z_QUAD_ENDSTOPS is now Z_MULTI_ENDSTOPS. Please update Configuration_adv.h."
Fix DUGS / DGUS typo
2020-03-13 01:29:32 +01:00
#elif defined(DUGS_UI_MOVE_DIS_OPTION)
#error "DUGS_UI_MOVE_DIS_OPTION is spelled DGUS_UI_MOVE_DIS_OPTION. Please update Configuration_adv.h."
Use the common pattern for auto fan pins Now that pins.h is guaranteed included after configs.
2020-04-16 10:24:41 +02:00
#elif defined(ORIG_E0_AUTO_FAN_PIN) || defined(ORIG_E1_AUTO_FAN_PIN) || defined(ORIG_E2_AUTO_FAN_PIN) || defined(ORIG_E3_AUTO_FAN_PIN) || defined(ORIG_E4_AUTO_FAN_PIN) || defined(ORIG_E5_AUTO_FAN_PIN) || defined(ORIG_E6_AUTO_FAN_PIN) || defined(ORIG_E7_AUTO_FAN_PIN)
#error "ORIG_Ex_AUTO_FAN_PIN is now just Ex_AUTO_FAN_PIN. Make sure your pins are up to date."
#elif defined(ORIG_CHAMBER_AUTO_FAN_PIN)
#error "ORIG_CHAMBER_AUTO_FAN_PIN is now just CHAMBER_AUTO_FAN_PIN. Make sure your pins are up to date."
Homing backoff enhancements - Define homing bump as an array - Add pre and post homing backoff options - Consolidate homing config options
2020-03-25 09:18:48 +01:00
#elif defined(HOMING_BACKOFF_MM)
#error "HOMING_BACKOFF_MM is now HOMING_BACKOFF_POST_MM. Please update Configuration_adv.h."
#elif defined(X_HOME_BUMP_MM) || defined(Y_HOME_BUMP_MM) || defined(Z_HOME_BUMP_MM)
#error "[XYZ]_HOME_BUMP_MM is now HOMING_BUMP_MM. Please update Configuration_adv.h."
Option to use raw digipot values (#17536)
2020-04-19 05:56:23 +02:00
#elif defined(DIGIPOT_I2C)
#error "DIGIPOT_I2C is now DIGIPOT_MCP4451 (or DIGIPOT_MCP4018). Please update Configuration_adv.h."
Move tests for old symbols to the top of sanity check
2016-08-05 06:03:55 +02:00
#endif
Filament Runout Inverting => State (#18537) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-07-06 00:42:19 +02:00
#ifdef FIL_RUNOUT_INVERTING
#if FIL_RUNOUT_INVERTING
#warning "FIL_RUNOUT_INVERTING true is now FIL_RUNOUT_STATE HIGH. Please update Configuration.h."
#else
#warning "FIL_RUNOUT_INVERTING false is now FIL_RUNOUT_STATE LOW. Please update Configuration.h."
#endif
#ifndef FIL_RUNOUT_STATE
#define FIL_RUNOUT_STATE ((FIL_RUNOUT_INVERTING) ? HIGH : LOW)
#endif
#endif
Fix G76 probe height / position (#17392)
2020-04-06 22:32:06 +02:00
/**
* Probe temp compensation requirements
*/
#if ENABLED(PROBE_TEMP_COMPENSATION)
#if defined(PTC_PARK_POS_X) || defined(PTC_PARK_POS_Y) || defined(PTC_PARK_POS_Z)
#error "PTC_PARK_POS_[XYZ] is now PTC_PARK_POS (array). Please update Configuration_adv.h."
#elif !defined(PTC_PARK_POS)
#error "PROBE_TEMP_COMPENSATION requires PTC_PARK_POS."
#elif defined(PTC_PROBE_POS_X) || defined(PTC_PROBE_POS_Y)
#error "PTC_PROBE_POS_[XY] is now PTC_PROBE_POS (array). Please update Configuration_adv.h."
#elif !defined(PTC_PROBE_POS)
#error "PROBE_TEMP_COMPENSATION requires PTC_PROBE_POS."
#endif
#endif
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
/**
* Marlin release, version and default string
*/
#ifndef SHORT_BUILD_VERSION
#error "SHORT_BUILD_VERSION must be specified."
#elif !defined(DETAILED_BUILD_VERSION)
#error "BUILD_VERSION must be specified."
#elif !defined(STRING_DISTRIBUTION_DATE)
#error "STRING_DISTRIBUTION_DATE must be specified."
#elif !defined(PROTOCOL_VERSION)
#error "PROTOCOL_VERSION must be specified."
#elif !defined(MACHINE_NAME)
#error "MACHINE_NAME must be specified."
#elif !defined(SOURCE_CODE_URL)
#error "SOURCE_CODE_URL must be specified."
#elif !defined(DEFAULT_MACHINE_UUID)
#error "DEFAULT_MACHINE_UUID must be specified."
#elif !defined(WEBSITE_URL)
#error "WEBSITE_URL must be specified."
#endif
[2.0.x] Enable hardware serial ports on LPC1768 (#8004) * Enable hardware serial ports on LPC1768 * Fix compilation errors with other HALs * FIx order of includes in LPC1768 HAL main.cpp * Add support for RX_BUFFER_SIZE and TX_BUFFER_SIZE options in Configuration_adv.h
2017-10-25 00:28:33 +02:00
/**
* Serial
*/
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10069) Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
2018-03-13 07:15:22 +01:00
#if !(defined(__AVR__) && defined(USBCON))
[2.0.x] Enable hardware serial ports on LPC1768 (#8004) * Enable hardware serial ports on LPC1768 * Fix compilation errors with other HALs * FIx order of includes in LPC1768 HAL main.cpp * Add support for RX_BUFFER_SIZE and TX_BUFFER_SIZE options in Configuration_adv.h
2017-10-25 00:28:33 +02:00
#if ENABLED(SERIAL_XON_XOFF) && RX_BUFFER_SIZE < 1024
SERIAL_XON_XOFF not supported on USB-native AVR devices User could enable SERIAL_XON_XOFF on USB-native devices and it would not be enabled without warning, but M115 would report the capability as available.
2017-12-04 12:56:47 +01:00
#error "SERIAL_XON_XOFF requires RX_BUFFER_SIZE >= 1024 for reliable transfers without drops."
Fix up serial sanity check
2017-12-20 02:11:07 +01:00
#elif RX_BUFFER_SIZE && (RX_BUFFER_SIZE < 2 || !IS_POWER_OF_2(RX_BUFFER_SIZE))
[2.0.x] Enable hardware serial ports on LPC1768 (#8004) * Enable hardware serial ports on LPC1768 * Fix compilation errors with other HALs * FIx order of includes in LPC1768 HAL main.cpp * Add support for RX_BUFFER_SIZE and TX_BUFFER_SIZE options in Configuration_adv.h
2017-10-25 00:28:33 +02:00
#error "RX_BUFFER_SIZE must be a power of 2 greater than 1."
Fix up serial sanity check
2017-12-20 02:11:07 +01:00
#elif TX_BUFFER_SIZE && (TX_BUFFER_SIZE < 2 || TX_BUFFER_SIZE > 256 || !IS_POWER_OF_2(TX_BUFFER_SIZE))
Add ESP32 WiFi interface (#11209)
2019-03-13 06:48:08 +01:00
#error "TX_BUFFER_SIZE must be 0 or a power of 2 between 1 and 256."
[2.0.x] Enable hardware serial ports on LPC1768 (#8004) * Enable hardware serial ports on LPC1768 * Fix compilation errors with other HALs * FIx order of includes in LPC1768 HAL main.cpp * Add support for RX_BUFFER_SIZE and TX_BUFFER_SIZE options in Configuration_adv.h
2017-10-25 00:28:33 +02:00
#endif
Extended condition macros (#13419) Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`
2019-03-17 05:43:06 +01:00
#elif ANY(SERIAL_XON_XOFF, SERIAL_STATS_MAX_RX_QUEUED, SERIAL_STATS_DROPPED_RX)
SERIAL_STATS_* features not supported on USBCON targets (#9127)
2018-01-10 01:42:55 +01:00
#error "SERIAL_XON_XOFF and SERIAL_STATS_* features not supported on USB-native AVR devices."
[2.0.x] Enable hardware serial ports on LPC1768 (#8004) * Enable hardware serial ports on LPC1768 * Fix compilation errors with other HALs * FIx order of includes in LPC1768 HAL main.cpp * Add support for RX_BUFFER_SIZE and TX_BUFFER_SIZE options in Configuration_adv.h
2017-10-25 00:28:33 +02:00
#endif
Sanity check SERIAL_PORT Addressing #7400
2018-02-09 07:44:15 +01:00
#if SERIAL_PORT > 7
#error "Set SERIAL_PORT to the port on your board. Usually this is 0."
#endif
Fix SERIAL_PORT_2 sanity check
2018-09-28 23:12:19 +02:00
#if defined(SERIAL_PORT_2) && NUM_SERIAL < 2
Disable SERIAL_PORT_2 by default and sanity-check it (#10748)
2018-05-15 04:38:24 +02:00
#error "SERIAL_PORT_2 is not supported for your MOTHERBOARD. Disable it to continue."
#endif
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
/**
Quad Z stepper support (#16277)
2020-01-20 06:35:07 +01:00
* Multiple Stepper Drivers Per Axis
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
*/
Quad Z stepper support (#16277)
2020-01-20 06:35:07 +01:00
#define GOOD_AXIS_PINS(A) (HAS_##A##_ENABLE && HAS_##A##_STEP && HAS_##A##_DIR)
#if ENABLED(X_DUAL_STEPPER_DRIVERS)
#if ENABLED(DUAL_X_CARRIAGE)
#error "DUAL_X_CARRIAGE is not compatible with X_DUAL_STEPPER_DRIVERS."
#elif !GOOD_AXIS_PINS(X)
#error "X_DUAL_STEPPER_DRIVERS requires X2 pins to be defined."
Add support for Triple-Z steppers/endstops
2018-06-19 18:55:49 +02:00
#endif
Quad Z stepper support (#16277)
2020-01-20 06:35:07 +01:00
#endif
#if ENABLED(Y_DUAL_STEPPER_DRIVERS) && !GOOD_AXIS_PINS(Y)
#error "Y_DUAL_STEPPER_DRIVERS requires Y2 pins to be defined."
#elif !WITHIN(NUM_Z_STEPPER_DRIVERS, 1, 4)
#error "NUM_Z_STEPPER_DRIVERS must be an integer from 1 to 4."
#elif NUM_Z_STEPPER_DRIVERS == 2 && !GOOD_AXIS_PINS(Z2)
#error "If NUM_Z_STEPPER_DRIVERS is 2, you must define stepper pins for Z2."
#elif NUM_Z_STEPPER_DRIVERS == 3 && !(GOOD_AXIS_PINS(Z2) && GOOD_AXIS_PINS(Z3))
#error "If NUM_Z_STEPPER_DRIVERS is 3, you must define stepper pins for Z2 and Z3."
#elif NUM_Z_STEPPER_DRIVERS == 4 && !(GOOD_AXIS_PINS(Z2) && GOOD_AXIS_PINS(Z3) && GOOD_AXIS_PINS(Z4))
#error "If NUM_Z_STEPPER_DRIVERS is 4, you must define stepper pins for Z2, Z3, and Z4."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
Add a sanity check for valid bed size
2017-08-05 10:28:30 +02:00
/**
* Validate that the bed size fits
*/
Split bed size sanity check into two
2019-01-11 22:49:41 +01:00
static_assert(X_MAX_LENGTH >= X_BED_SIZE, "Movement bounds (X_MIN_POS, X_MAX_POS) are too narrow to contain X_BED_SIZE.");
static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS) are too narrow to contain Y_BED_SIZE.");
Add a sanity check for valid bed size
2017-08-05 10:28:30 +02:00
Split the software endstop capability by axis.
2017-10-14 14:18:09 +02:00
/**
* Granular software endstops (Marlin >= 1.1.7)
*/
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) && DISABLED(MIN_SOFTWARE_ENDSTOP_Z)
#if IS_KINEMATIC
#error "MIN_SOFTWARE_ENDSTOPS on DELTA/SCARA also requires MIN_SOFTWARE_ENDSTOP_Z."
NONE on combined options
2019-07-06 01:20:15 +02:00
#elif NONE(MIN_SOFTWARE_ENDSTOP_X, MIN_SOFTWARE_ENDSTOP_Y)
Split the software endstop capability by axis.
2017-10-14 14:18:09 +02:00
#error "MIN_SOFTWARE_ENDSTOPS requires at least one of the MIN_SOFTWARE_ENDSTOP_[XYZ] options."
#endif
#endif
#if ENABLED(MAX_SOFTWARE_ENDSTOPS) && DISABLED(MAX_SOFTWARE_ENDSTOP_Z)
#if IS_KINEMATIC
#error "MAX_SOFTWARE_ENDSTOPS on DELTA/SCARA also requires MAX_SOFTWARE_ENDSTOP_Z."
NONE on combined options
2019-07-06 01:20:15 +02:00
#elif NONE(MAX_SOFTWARE_ENDSTOP_X, MAX_SOFTWARE_ENDSTOP_Y)
Split the software endstop capability by axis.
2017-10-14 14:18:09 +02:00
#error "MAX_SOFTWARE_ENDSTOPS requires at least one of the MAX_SOFTWARE_ENDSTOP_[XYZ] options."
#endif
#endif
Update some precompiler tests
2019-07-14 15:56:29 +02:00
#if !defined(TARGET_LPC1768) && ANY( \
ENDSTOPPULLDOWNS, \
ENDSTOPPULLDOWN_XMAX, ENDSTOPPULLDOWN_YMAX, \
ENDSTOPPULLDOWN_ZMAX, ENDSTOPPULLDOWN_XMIN, \
ENDSTOPPULLDOWN_YMIN, ENDSTOPPULLDOWN_ZMIN \
)
Pulldown pin mode support (#9701) Implemented for LPC1768.
2018-02-19 02:26:23 +01:00
#error "PULLDOWN pin mode is not available on the selected board."
#endif
Extended condition macros (#13419) Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`
2019-03-17 05:43:06 +01:00
#if BOTH(ENDSTOPPULLUPS, ENDSTOPPULLDOWNS)
Pulldown pin mode support (#9701) Implemented for LPC1768.
2018-02-19 02:26:23 +01:00
#error "Enable only one of ENDSTOPPULLUPS or ENDSTOPPULLDOWNS."
Extended condition macros (#13419) Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`
2019-03-17 05:43:06 +01:00
#elif BOTH(FIL_RUNOUT_PULLUP, FIL_RUNOUT_PULLDOWN)
Pulldown pin mode support (#9701) Implemented for LPC1768.
2018-02-19 02:26:23 +01:00
#error "Enable only one of FIL_RUNOUT_PULLUP or FIL_RUNOUT_PULLDOWN."
Extended condition macros (#13419) Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`
2019-03-17 05:43:06 +01:00
#elif BOTH(ENDSTOPPULLUP_XMAX, ENDSTOPPULLDOWN_XMAX)
Pulldown pin mode support (#9701) Implemented for LPC1768.
2018-02-19 02:26:23 +01:00
#error "Enable only one of ENDSTOPPULLUP_X_MAX or ENDSTOPPULLDOWN_X_MAX."
Extended condition macros (#13419) Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`
2019-03-17 05:43:06 +01:00
#elif BOTH(ENDSTOPPULLUP_YMAX, ENDSTOPPULLDOWN_YMAX)
Pulldown pin mode support (#9701) Implemented for LPC1768.
2018-02-19 02:26:23 +01:00
#error "Enable only one of ENDSTOPPULLUP_Y_MAX or ENDSTOPPULLDOWN_Y_MAX."
Extended condition macros (#13419) Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`
2019-03-17 05:43:06 +01:00
#elif BOTH(ENDSTOPPULLUP_ZMAX, ENDSTOPPULLDOWN_ZMAX)
Pulldown pin mode support (#9701) Implemented for LPC1768.
2018-02-19 02:26:23 +01:00
#error "Enable only one of ENDSTOPPULLUP_Z_MAX or ENDSTOPPULLDOWN_Z_MAX."
Extended condition macros (#13419) Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`
2019-03-17 05:43:06 +01:00
#elif BOTH(ENDSTOPPULLUP_XMIN, ENDSTOPPULLDOWN_XMIN)
Pulldown pin mode support (#9701) Implemented for LPC1768.
2018-02-19 02:26:23 +01:00
#error "Enable only one of ENDSTOPPULLUP_X_MIN or ENDSTOPPULLDOWN_X_MIN."
Extended condition macros (#13419) Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`
2019-03-17 05:43:06 +01:00
#elif BOTH(ENDSTOPPULLUP_YMIN, ENDSTOPPULLDOWN_YMIN)
Pulldown pin mode support (#9701) Implemented for LPC1768.
2018-02-19 02:26:23 +01:00
#error "Enable only one of ENDSTOPPULLUP_Y_MIN or ENDSTOPPULLDOWN_Y_MIN."
Extended condition macros (#13419) Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`
2019-03-17 05:43:06 +01:00
#elif BOTH(ENDSTOPPULLUP_ZMIN, ENDSTOPPULLDOWN_ZMIN)
Pulldown pin mode support (#9701) Implemented for LPC1768.
2018-02-19 02:26:23 +01:00
#error "Enable only one of ENDSTOPPULLUP_Z_MIN or ENDSTOPPULLDOWN_Z_MIN."
#endif
Alternative info screen (Prusa-style) (#12132) * Fix Z value display * Add HAS_PRINT_PROGRESS * Alternative Info Screen option * Add LCD_INFO_SCREEN_STYLE to example configs
2018-10-18 18:34:52 +02:00
/**
* LCD Info Screen Style
*/
#if LCD_INFO_SCREEN_STYLE > 0
LCD conditionals in configurations
2018-10-25 15:59:28 +02:00
#if HAS_GRAPHICAL_LCD || LCD_WIDTH < 20 || LCD_HEIGHT < 4
Alternative info screen (Prusa-style) (#12132) * Fix Z value display * Add HAS_PRINT_PROGRESS * Alternative Info Screen option * Add LCD_INFO_SCREEN_STYLE to example configs
2018-10-18 18:34:52 +02:00
#error "Alternative LCD_INFO_SCREEN_STYLE requires 20x4 Character LCD."
#elif LCD_INFO_SCREEN_STYLE > 1
#error "LCD_INFO_SCREEN_STYLE only has options 0 and 1 at this time."
#endif
#endif
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
/**
* Progress Bar
*/
#if ENABLED(LCD_PROGRESS_BAR)
NONE on combined options
2019-07-06 01:20:15 +02:00
#if NONE(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
LCD_PROGRESS_BAR w/out SDSUPPORT for character LCD
2018-02-17 15:01:36 +01:00
#error "LCD_PROGRESS_BAR requires SDSUPPORT or LCD_SET_PROGRESS_MANUALLY."
LCD conditionals in configurations
2018-10-25 15:59:28 +02:00
#elif !HAS_CHARACTER_LCD
Changes for parity with 1.1.x
2017-12-06 23:56:30 +01:00
#error "LCD_PROGRESS_BAR requires a character LCD."
LCD conditionals in configurations
2018-10-25 15:59:28 +02:00
#elif HAS_GRAPHICAL_LCD
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#error "LCD_PROGRESS_BAR does not apply to graphical displays."
Clean up sanity check for LCD_PROGRESS_BAR
2016-09-12 05:42:54 +02:00
#elif ENABLED(FILAMENT_LCD_DISPLAY)
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#error "LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both."
Encapsulate common display code in a singleton (#12395) * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 19:16:24 +01:00
#elif PROGRESS_MSG_EXPIRE < 0
#error "PROGRESS_MSG_EXPIRE must be greater than or equal to 0."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
Apply composite tests
2020-04-24 04:42:38 +02:00
#elif ENABLED(LCD_SET_PROGRESS_MANUALLY) && NONE(HAS_GRAPHICAL_LCD, EXTENSIBLE_UI)
Allow ExtUI to use LCD_SET_PROGRESS_MANUALLY (#12628)
2018-12-13 00:21:37 +01:00
#error "LCD_SET_PROGRESS_MANUALLY requires LCD_PROGRESS_BAR, Graphical LCD, or EXTENSIBLE_UI."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
Sanity-check for SD reprint
2019-09-18 06:10:51 +02:00
#if !HAS_LCD_MENU && ENABLED(SD_REPRINT_LAST_SELECTED_FILE)
#error "SD_REPRINT_LAST_SELECTED_FILE currently requires a Marlin-native LCD menu."
#endif
Sanity-check some graphical LCD-only options
2018-03-04 03:07:28 +01:00
/**
* Custom Boot and Status screens
*/
Apply composite tests
2020-04-24 04:42:38 +02:00
#if ENABLED(SHOW_CUSTOM_BOOTSCREEN) && NONE(HAS_GRAPHICAL_LCD, TOUCH_UI_FTDI_EVE)
LULZBOT_TOUCH_UI => TOUCH_UI_FTDI_EVE
2019-11-23 23:53:44 +01:00
#error "SHOW_CUSTOM_BOOTSCREEN requires Graphical LCD or TOUCH_UI_FTDI_EVE."
Touch UI finishing touches
2019-11-10 04:17:18 +01:00
#elif ENABLED(CUSTOM_STATUS_SCREEN_IMAGE) && !HAS_GRAPHICAL_LCD
#error "CUSTOM_STATUS_SCREEN_IMAGE requires a Graphical LCD."
Sanity-check some graphical LCD-only options
2018-03-04 03:07:28 +01:00
#endif
Sanity-check LIGHTWEIGHT_UI, move comment up (#12630)
2018-12-12 23:59:20 +01:00
/**
* LCD Lightweight Screen Style
*/
#if ENABLED(LIGHTWEIGHT_UI) && DISABLED(U8GLIB_ST7920)
#error "LIGHTWEIGHT_UI requires a U8GLIB_ST7920-based display."
#endif
New feature: SDCARD_SORT_ALPHA
2017-02-09 14:02:25 +01:00
/**
* SD File Sorting
*/
#if ENABLED(SDCARD_SORT_ALPHA)
#if SDSORT_LIMIT > 256
#error "SDSORT_LIMIT must be 256 or smaller."
#elif SDSORT_LIMIT < 10
#error "SDSORT_LIMIT should be greater than 9 to be useful."
Dynamic allocation for SDCARD_SORT_ALPHA
2017-02-09 14:05:34 +01:00
#elif DISABLED(SDSORT_USES_RAM)
#if ENABLED(SDSORT_DYNAMIC_RAM)
#error "SDSORT_DYNAMIC_RAM requires SDSORT_USES_RAM (which reads the directory into RAM)."
#elif ENABLED(SDSORT_CACHE_NAMES)
#error "SDSORT_CACHE_NAMES requires SDSORT_USES_RAM (which reads the directory into RAM)."
#endif
New feature: SDCARD_SORT_ALPHA
2017-02-09 14:02:25 +01:00
#endif
Prevent SDCARD_SORT_ALPHA from exploding
2017-10-19 05:18:51 +02:00
#if ENABLED(SDSORT_CACHE_NAMES) && DISABLED(SDSORT_DYNAMIC_RAM)
#if SDSORT_CACHE_VFATS < 2
#error "SDSORT_CACHE_VFATS must be 2 or greater!"
#elif SDSORT_CACHE_VFATS > MAX_VFAT_ENTRIES
#undef SDSORT_CACHE_VFATS
#define SDSORT_CACHE_VFATS MAX_VFAT_ENTRIES
#warning "SDSORT_CACHE_VFATS was reduced to MAX_VFAT_ENTRIES!"
#endif
#endif
New feature: SDCARD_SORT_ALPHA
2017-02-09 14:02:25 +01:00
#endif
Event G-code for Stop SD Print (#13547) Co-Authored-By: 7eggert <7eggert@gmx.de> Co-Authored-By: robbycandra <robbycandra.mail@gmail.com>
2019-04-03 05:09:30 +02:00
#if defined(EVENT_GCODE_SD_STOP) && DISABLED(NOZZLE_PARK_FEATURE)
Use C++ language supported 'nullptr' (#13944)
2019-05-09 18:45:55 +02:00
static_assert(nullptr == strstr(EVENT_GCODE_SD_STOP, "G27"), "NOZZLE_PARK_FEATURE is required to use G27 in EVENT_GCODE_SD_STOP.");
Event G-code for Stop SD Print (#13547) Co-Authored-By: 7eggert <7eggert@gmx.de> Co-Authored-By: robbycandra <robbycandra.mail@gmail.com>
2019-04-03 05:09:30 +02:00
#endif
[New Feature] I2C position encoder support (#6946) * [New Feature] I2C position encoder support I plan to continue improving/cleaning this up, as there areas that need work. * let the cleanups begin. * progress * more progress * comments, rename files, etc. * clean * Cleanups per thinkyhead * a few more cleanups * cleanups, bugfixes, etc. * remove unnecessary passes_test(), additional cleanups/optimizations * cleanups * misc. * Fix up I2CPEM.init() and a few other things. * organize, fix, rename, etc. * more optimization * a few more tweaks
2017-06-09 14:06:23 +02:00
/**
* I2C Position Encoders
*/
#if ENABLED(I2C_POSITION_ENCODERS)
Update some precompiler tests
2019-07-14 15:56:29 +02:00
#if !BOTH(BABYSTEPPING, BABYSTEP_XY)
I2C position encoders update (#9533) Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.
2018-02-08 10:57:11 +01:00
#error "I2C_POSITION_ENCODERS requires BABYSTEPPING and BABYSTEP_XY."
Followup for I2C_POSITION_ENCODERS
2017-06-09 17:22:49 +02:00
#elif !WITHIN(I2CPE_ENCODER_CNT, 1, 5)
[New Feature] I2C position encoder support (#6946) * [New Feature] I2C position encoder support I plan to continue improving/cleaning this up, as there areas that need work. * let the cleanups begin. * progress * more progress * comments, rename files, etc. * clean * Cleanups per thinkyhead * a few more cleanups * cleanups, bugfixes, etc. * remove unnecessary passes_test(), additional cleanups/optimizations * cleanups * misc. * Fix up I2CPEM.init() and a few other things. * organize, fix, rename, etc. * more optimization * a few more tweaks
2017-06-09 14:06:23 +02:00
#error "I2CPE_ENCODER_CNT must be between 1 and 5."
#endif
#endif
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
/**
* Babystepping
*/
#if ENABLED(BABYSTEPPING)
Add M290 Babystepping
2017-10-25 22:49:34 +02:00
#if ENABLED(SCARA)
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#error "BABYSTEPPING is not implemented for SCARA yet."
Extended condition macros (#13419) Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`
2019-03-17 05:43:06 +01:00
#elif BOTH(DELTA, BABYSTEP_XY)
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#error "BABYSTEPPING only implemented for Z axis on deltabots."
Extended condition macros (#13419) Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`
2019-03-17 05:43:06 +01:00
#elif BOTH(BABYSTEP_ZPROBE_OFFSET, MESH_BED_LEVELING)
warn user of an invalid combination
2017-06-17 22:02:25 +02:00
#error "MESH_BED_LEVELING and BABYSTEP_ZPROBE_OFFSET is not a valid combination"
Add BABYSTEP_ZPROBE_OFFSET as an optional feature
2017-04-13 23:29:43 +02:00
#elif ENABLED(BABYSTEP_ZPROBE_OFFSET) && !HAS_BED_PROBE
#error "BABYSTEP_ZPROBE_OFFSET requires a probe."
Update DOGLCD conditions
2019-07-14 16:29:53 +02:00
#elif ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) && !HAS_GRAPHICAL_LCD
Creality3D Power-Loss Recovery
2018-04-22 02:41:26 +02:00
#error "BABYSTEP_ZPROBE_GFX_OVERLAY requires a Graphical LCD."
!ENABLED => DISABLED
2018-08-24 23:35:55 +02:00
#elif ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) && DISABLED(BABYSTEP_ZPROBE_OFFSET)
Add Babystep Z graphic overlay See PR #7593
2017-09-27 07:58:46 +02:00
#error "BABYSTEP_ZPROBE_GFX_OVERLAY requires a BABYSTEP_ZPROBE_OFFSET."
Followup for BABYSTEP_HOTEND_Z_OFFSET (#11916)
2018-09-25 03:46:56 +02:00
#elif ENABLED(BABYSTEP_HOTEND_Z_OFFSET) && !HAS_HOTEND_OFFSET
#error "BABYSTEP_HOTEND_Z_OFFSET requires 2 or more HOTENDS."
Extended condition macros (#13419) Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`
2019-03-17 05:43:06 +01:00
#elif BOTH(BABYSTEP_ALWAYS_AVAILABLE, MOVE_Z_WHEN_IDLE)
Add more Babystep options (#13262)
2019-02-27 11:38:56 +01:00
#error "BABYSTEP_ALWAYS_AVAILABLE and MOVE_Z_WHEN_IDLE are incompatible."
Sanity-check BABYSTEP_MULTIPLICATOR_*
2020-07-15 09:53:23 +02:00
#elif !defined(BABYSTEP_MULTIPLICATOR_Z)
#error "BABYSTEPPING requires BABYSTEP_MULTIPLICATOR_Z."
#elif ENABLED(BABYSTEP_XY) && !defined(BABYSTEP_MULTIPLICATOR_XY)
#error "BABYSTEP_XY requires BABYSTEP_MULTIPLICATOR_XY."
#elif ENABLED(BABYSTEP_MILLIMETER_UNITS)
static_assert(BABYSTEP_MULTIPLICATOR_Z <= 0.1f, "BABYSTEP_MULTIPLICATOR_Z must be less or equal to 0.1mm.");
#if ENABLED(BABYSTEP_XY)
static_assert(BABYSTEP_MULTIPLICATOR_XY <= 0.25f, "BABYSTEP_MULTIPLICATOR_XY must be less than or equal to 0.25mm.");
#endif
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
#endif
/**
Support for multiple filament runout sensors
2018-02-18 09:42:09 +01:00
* Filament Runout needs one or more pins and either SD Support or Auto print start detection
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
*/
Add HAS_FILAMENT_SENSOR ahead of 12962
2019-02-13 03:08:34 +01:00
#if HAS_FILAMENT_SENSOR
Support for multiple filament runout sensors
2018-02-18 09:42:09 +01:00
#if !PIN_EXISTS(FIL_RUNOUT)
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#error "FILAMENT_RUNOUT_SENSOR requires FIL_RUNOUT_PIN."
Support for multiple filament runout sensors
2018-02-18 09:42:09 +01:00
#elif NUM_RUNOUT_SENSORS > E_STEPPERS
#error "NUM_RUNOUT_SENSORS cannot exceed the number of E steppers."
#elif NUM_RUNOUT_SENSORS > 1 && !PIN_EXISTS(FIL_RUNOUT2)
#error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 1 requires FIL_RUNOUT2_PIN."
#elif NUM_RUNOUT_SENSORS > 2 && !PIN_EXISTS(FIL_RUNOUT3)
#error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 2 requires FIL_RUNOUT3_PIN."
#elif NUM_RUNOUT_SENSORS > 3 && !PIN_EXISTS(FIL_RUNOUT4)
#error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 3 requires FIL_RUNOUT4_PIN."
#elif NUM_RUNOUT_SENSORS > 4 && !PIN_EXISTS(FIL_RUNOUT5)
#error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 4 requires FIL_RUNOUT5_PIN."
Code changes supporting up to 6 extruders
2018-09-13 08:35:55 +02:00
#elif NUM_RUNOUT_SENSORS > 5 && !PIN_EXISTS(FIL_RUNOUT6)
#error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 5 requires FIL_RUNOUT6_PIN."
NONE on combined options
2019-07-06 01:20:15 +02:00
#elif NONE(SDSUPPORT, PRINTJOB_TIMER_AUTOSTART)
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#error "FILAMENT_RUNOUT_SENSOR requires SDSUPPORT or PRINTJOB_TIMER_AUTOSTART."
Backlash cleanup (#13659) …And save backlash, fil. sensor, ExtUI userdata to EEPROM.
2019-05-04 06:53:15 +02:00
#elif FILAMENT_RUNOUT_DISTANCE_MM < 0
#error "FILAMENT_RUNOUT_DISTANCE_MM must be greater than or equal to zero."
Unify M600 and M125 pause features (#6407) * Unify M600 and M125 pause features * Cleanup per thinkyhead's comments * Rename filament_change_menu_response to advanced_pause_menu_response * Include HAS_BED_PROBE in QUIET_PROBING * Update gMax example file * is_idle() is out of scope without the braces * Convert FT-i3-2020 to Advance Pause names... * Allow pause even if not printing
2017-05-26 20:01:02 +02:00
#elif DISABLED(ADVANCED_PAUSE_FEATURE)
Use C++ language supported 'nullptr' (#13944)
2019-05-09 18:45:55 +02:00
static_assert(nullptr == strstr(FILAMENT_RUNOUT_SCRIPT, "M600"), "ADVANCED_PAUSE_FEATURE is required to use M600 with FILAMENT_RUNOUT_SENSOR.");
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
#endif
/**
Unify M600 and M125 pause features (#6407) * Unify M600 and M125 pause features * Cleanup per thinkyhead's comments * Rename filament_change_menu_response to advanced_pause_menu_response * Include HAS_BED_PROBE in QUIET_PROBING * Update gMax example file * is_idle() is out of scope without the braces * Convert FT-i3-2020 to Advance Pause names... * Allow pause even if not printing
2017-05-26 20:01:02 +02:00
* Advanced Pause
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
*/
Unify M600 and M125 pause features (#6407) * Unify M600 and M125 pause features * Cleanup per thinkyhead's comments * Rename filament_change_menu_response to advanced_pause_menu_response * Include HAS_BED_PROBE in QUIET_PROBING * Update gMax example file * is_idle() is out of scope without the braces * Convert FT-i3-2020 to Advance Pause names... * Allow pause even if not printing
2017-05-26 20:01:02 +02:00
#if ENABLED(ADVANCED_PAUSE_FEATURE)
Add M701/M702 Filament Load/Unload, M603
2018-01-04 12:06:34 +01:00
#if !HAS_RESUME_CONTINUE
#error "ADVANCED_PAUSE_FEATURE currently requires an LCD controller or EMERGENCY_PARSER."
Add sanity-check for new Advanced Pause option Followup to #16372
2020-01-31 06:24:34 +01:00
#elif DISABLED(NOZZLE_PARK_FEATURE)
#error "ADVANCED_PAUSE_FEATURE requires NOZZLE_PARK_FEATURE."
#elif !defined(FILAMENT_UNLOAD_PURGE_FEEDRATE)
#error "ADVANCED_PAUSE_FEATURE requires FILAMENT_UNLOAD_PURGE_FEEDRATE. Please add it to Configuration_adv.h."
Sanity checks for FILAMENT_CHANGE_FEATURE and FILAMENT_RUNOUT_SCRIPT
2016-12-24 04:48:18 +01:00
#elif ENABLED(EXTRUDER_RUNOUT_PREVENT)
Unify M600 and M125 pause features (#6407) * Unify M600 and M125 pause features * Cleanup per thinkyhead's comments * Rename filament_change_menu_response to advanced_pause_menu_response * Include HAS_BED_PROBE in QUIET_PROBING * Update gMax example file * is_idle() is out of scope without the braces * Convert FT-i3-2020 to Advance Pause names... * Allow pause even if not printing
2017-05-26 20:01:02 +02:00
#error "EXTRUDER_RUNOUT_PREVENT is incompatible with ADVANCED_PAUSE_FEATURE."
NONE on combined options
2019-07-06 01:20:15 +02:00
#elif ENABLED(PARK_HEAD_ON_PAUSE) && NONE(SDSUPPORT, NEWPANEL, EMERGENCY_PARSER)
Add PARK_HEAD_ON_PAUSE feature
2017-03-18 03:24:33 +01:00
#error "PARK_HEAD_ON_PAUSE requires SDSUPPORT, EMERGENCY_PARSER, or an LCD controller."
Add option to disallow filament change without homing first
2017-06-15 04:06:34 +02:00
#elif ENABLED(HOME_BEFORE_FILAMENT_CHANGE) && DISABLED(PAUSE_PARK_NO_STEPPER_TIMEOUT)
Add M701/M702 Filament Load/Unload, M603
2018-01-04 12:06:34 +01:00
#error "HOME_BEFORE_FILAMENT_CHANGE requires PAUSE_PARK_NO_STEPPER_TIMEOUT."
#elif ENABLED(PREVENT_LENGTHY_EXTRUDE) && FILAMENT_CHANGE_UNLOAD_LENGTH > EXTRUDE_MAXLENGTH
#error "FILAMENT_CHANGE_UNLOAD_LENGTH must be less than or equal to EXTRUDE_MAXLENGTH."
Add Filament Change accelerations
2018-03-20 19:19:10 +01:00
#elif ENABLED(PREVENT_LENGTHY_EXTRUDE) && FILAMENT_CHANGE_SLOW_LOAD_LENGTH > EXTRUDE_MAXLENGTH
#error "FILAMENT_CHANGE_SLOW_LOAD_LENGTH must be less than or equal to EXTRUDE_MAXLENGTH."
#elif ENABLED(PREVENT_LENGTHY_EXTRUDE) && FILAMENT_CHANGE_FAST_LOAD_LENGTH > EXTRUDE_MAXLENGTH
#error "FILAMENT_CHANGE_FAST_LOAD_LENGTH must be less than or equal to EXTRUDE_MAXLENGTH."
Sanity checks for FILAMENT_CHANGE_FEATURE and FILAMENT_RUNOUT_SCRIPT
2016-12-24 04:48:18 +01:00
#endif
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
Sanity-check NOZZLE_PARK_POINT
2018-09-05 13:18:08 +02:00
#if ENABLED(NOZZLE_PARK_FEATURE)
constexpr float npp[] = NOZZLE_PARK_POINT;
static_assert(COUNT(npp) == XYZ, "NOZZLE_PARK_POINT requires X, Y, and Z values.");
Sanity-check nozzle park point (#17621)
2020-04-20 13:54:24 +02:00
constexpr xyz_pos_t npp_xyz = NOZZLE_PARK_POINT;
static_assert(WITHIN(npp_xyz.x, X_MIN_POS, X_MAX_POS), "NOZZLE_PARK_POINT.X is out of bounds (X_MIN_POS, X_MAX_POS).");
static_assert(WITHIN(npp_xyz.y, Y_MIN_POS, Y_MAX_POS), "NOZZLE_PARK_POINT.Y is out of bounds (Y_MIN_POS, Y_MAX_POS).");
static_assert(WITHIN(npp_xyz.z, Z_MIN_POS, Z_MAX_POS), "NOZZLE_PARK_POINT.Z is out of bounds (Z_MIN_POS, Z_MAX_POS).");
Sanity-check NOZZLE_PARK_POINT
2018-09-05 13:18:08 +02:00
#endif
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
/**
* Individual axis homing is useless for DELTAS
*/
Extended condition macros (#13419) Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`
2019-03-17 05:43:06 +01:00
#if BOTH(INDIVIDUAL_AXIS_HOMING_MENU, DELTA)
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#error "INDIVIDUAL_AXIS_HOMING_MENU is incompatible with DELTA kinematics."
#endif
/**
* Options only for EXTRUDERS > 1
*/
#if EXTRUDERS > 1
BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (#16595)
2020-01-25 09:13:39 +01:00
#if EXTRUDERS > 8
#error "Marlin supports a maximum of 8 EXTRUDERS."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
#if ENABLED(HEATERS_PARALLEL)
#error "EXTRUDERS must be 1 with HEATERS_PARALLEL."
#endif
Combine more tool-change variables (#12137)
2018-11-07 04:52:20 +01:00
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
Automatic Tool Migration feature (#17248)
2020-04-23 04:03:28 +02:00
#ifndef TOOLCHANGE_FS_LENGTH
#error "TOOLCHANGE_FILAMENT_SWAP requires TOOLCHANGE_FS_LENGTH. Please update your Configuration_adv.h."
#elif !defined(TOOLCHANGE_FS_RETRACT_SPEED)
#error "TOOLCHANGE_FILAMENT_SWAP requires TOOLCHANGE_FS_RETRACT_SPEED. Please update your Configuration_adv.h."
#elif !defined(TOOLCHANGE_FS_PRIME_SPEED)
#error "TOOLCHANGE_FILAMENT_SWAP requires TOOLCHANGE_FS_PRIME_SPEED. Please update your Configuration_adv.h."
Various fixups for single-nozzle filament swap (#12036)
2018-10-08 22:39:55 +02:00
#endif
Combine more tool-change variables (#12137)
2018-11-07 04:52:20 +01:00
#endif
Automatic Tool Migration feature (#17248)
2020-04-23 04:03:28 +02:00
Combine more tool-change variables (#12137)
2018-11-07 04:52:20 +01:00
#if ENABLED(TOOLCHANGE_PARK)
#ifndef TOOLCHANGE_PARK_XY
#error "TOOLCHANGE_PARK requires TOOLCHANGE_PARK_XY. Please update your Configuration."
#elif !defined(TOOLCHANGE_PARK_XY_FEEDRATE)
#error "TOOLCHANGE_PARK requires TOOLCHANGE_PARK_XY_FEEDRATE. Please update your Configuration."
Various fixups for single-nozzle filament swap (#12036)
2018-10-08 22:39:55 +02:00
#endif
Single nozzle filament change (#11994)
2018-10-08 00:06:14 +02:00
#endif
Clean trailing whitespace
2018-11-07 09:39:59 +01:00
Combine more tool-change variables (#12137)
2018-11-07 04:52:20 +01:00
#ifndef TOOLCHANGE_ZRAISE
Fix TOOLCHANGE_ZRAISE warning (#14156)
2019-05-28 02:51:29 +02:00
#error "TOOLCHANGE_ZRAISE required for EXTRUDERS > 1. Please update your Configuration_adv.h."
Combine more tool-change variables (#12137)
2018-11-07 04:52:20 +01:00
#endif
Single nozzle filament change (#11994)
2018-10-08 00:06:14 +02:00
Add support for Průša MK2 Multiplexer
2017-06-02 20:57:31 +02:00
#elif ENABLED(MK2_MULTIPLEXER)
#error "MK2_MULTIPLEXER requires 2 or more EXTRUDERS."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#elif ENABLED(SINGLENOZZLE)
#error "SINGLENOZZLE requires 2 or more EXTRUDERS."
#endif
Add support for Průša MK2 Multiplexer
2017-06-02 20:57:31 +02:00
/**
* Sanity checking for the Průša MK2 Multiplexer
*/
#ifdef SNMM
#error "SNMM is now MK2_MULTIPLEXER. Please update your configuration."
#endif
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
/**
Support for two switching extruders
2017-06-19 23:54:37 +02:00
* A Dual Nozzle carriage with switching servo
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
*/
Separate SWITCHING_NOZZLE and SWITCHING_EXTRUDER
2017-05-12 21:09:40 +02:00
#if ENABLED(SWITCHING_NOZZLE)
Support for two switching extruders
2017-06-19 23:54:37 +02:00
#if ENABLED(DUAL_X_CARRIAGE)
#error "SWITCHING_NOZZLE and DUAL_X_CARRIAGE are incompatible."
#elif ENABLED(SINGLENOZZLE)
Separate SWITCHING_NOZZLE and SWITCHING_EXTRUDER
2017-05-12 21:09:40 +02:00
#error "SWITCHING_NOZZLE and SINGLENOZZLE are incompatible."
Support for two switching extruders
2017-06-19 23:54:37 +02:00
#elif EXTRUDERS != 2
Separate SWITCHING_NOZZLE and SWITCHING_EXTRUDER
2017-05-12 21:09:40 +02:00
#error "SWITCHING_NOZZLE requires exactly 2 EXTRUDERS."
#elif NUM_SERVOS < 1
#error "SWITCHING_NOZZLE requires NUM_SERVOS >= 1."
Support SWITCHING_NOZZLE with 2 servos (#13054)
2019-02-04 07:19:56 +01:00
#endif
#ifndef SWITCHING_NOZZLE_SERVO_NR
#error "SWITCHING_NOZZLE requires SWITCHING_NOZZLE_SERVO_NR."
Fix up Teensy tests, servo sanity
2018-09-01 08:10:20 +02:00
#elif SWITCHING_NOZZLE_SERVO_NR == 0 && !PIN_EXISTS(SERVO0)
#error "SERVO0_PIN must be defined for your SWITCHING_NOZZLE."
#elif SWITCHING_NOZZLE_SERVO_NR == 1 && !PIN_EXISTS(SERVO1)
#error "SERVO1_PIN must be defined for your SWITCHING_NOZZLE."
#elif SWITCHING_NOZZLE_SERVO_NR == 2 && !PIN_EXISTS(SERVO2)
#error "SERVO2_PIN must be defined for your SWITCHING_NOZZLE."
#elif SWITCHING_NOZZLE_SERVO_NR == 3 && !PIN_EXISTS(SERVO3)
#error "SERVO3_PIN must be defined for your SWITCHING_NOZZLE."
Separate SWITCHING_NOZZLE and SWITCHING_EXTRUDER
2017-05-12 21:09:40 +02:00
#endif
Support SWITCHING_NOZZLE with 2 servos (#13054)
2019-02-04 07:19:56 +01:00
#ifdef SWITCHING_NOZZLE_E1_SERVO_NR
#if SWITCHING_NOZZLE_E1_SERVO_NR == SWITCHING_NOZZLE_SERVO_NR
#error "SWITCHING_NOZZLE_E1_SERVO_NR must be different from SWITCHING_NOZZLE_SERVO_NR."
#elif SWITCHING_NOZZLE_E1_SERVO_NR == 0 && !PIN_EXISTS(SERVO0)
#error "SERVO0_PIN must be defined for your SWITCHING_NOZZLE."
#elif SWITCHING_NOZZLE_E1_SERVO_NR == 1 && !PIN_EXISTS(SERVO1)
#error "SERVO1_PIN must be defined for your SWITCHING_NOZZLE."
#elif SWITCHING_NOZZLE_E1_SERVO_NR == 2 && !PIN_EXISTS(SERVO2)
#error "SERVO2_PIN must be defined for your SWITCHING_NOZZLE."
#elif SWITCHING_NOZZLE_E1_SERVO_NR == 3 && !PIN_EXISTS(SERVO3)
#error "SERVO3_PIN must be defined for your SWITCHING_NOZZLE."
#endif
#endif
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
/**
* Single Stepper Dual Extruder with switching servo
*/
Fix up Teensy tests, servo sanity
2018-09-01 08:10:20 +02:00
#if ENABLED(SWITCHING_EXTRUDER)
#if NUM_SERVOS < 1
#error "SWITCHING_EXTRUDER requires NUM_SERVOS >= 1."
#elif SWITCHING_EXTRUDER_SERVO_NR == 0 && !PIN_EXISTS(SERVO0)
#error "SERVO0_PIN must be defined for your SWITCHING_EXTRUDER."
#elif SWITCHING_EXTRUDER_SERVO_NR == 1 && !PIN_EXISTS(SERVO1)
#error "SERVO1_PIN must be defined for your SWITCHING_EXTRUDER."
#elif SWITCHING_EXTRUDER_SERVO_NR == 2 && !PIN_EXISTS(SERVO2)
#error "SERVO2_PIN must be defined for your SWITCHING_EXTRUDER."
#elif SWITCHING_EXTRUDER_SERVO_NR == 3 && !PIN_EXISTS(SERVO3)
#error "SERVO3_PIN must be defined for your SWITCHING_EXTRUDER."
#endif
#if EXTRUDERS > 3
#if NUM_SERVOS < 2
#error "SWITCHING_EXTRUDER with 4 extruders requires NUM_SERVOS >= 2."
#elif SWITCHING_EXTRUDER_E23_SERVO_NR == 0 && !PIN_EXISTS(SERVO0)
#error "SERVO0_PIN must be defined for your SWITCHING_EXTRUDER."
#elif SWITCHING_EXTRUDER_E23_SERVO_NR == 1 && !PIN_EXISTS(SERVO1)
#error "SERVO1_PIN must be defined for your SWITCHING_EXTRUDER."
#elif SWITCHING_EXTRUDER_E23_SERVO_NR == 2 && !PIN_EXISTS(SERVO2)
#error "SERVO2_PIN must be defined for your SWITCHING_EXTRUDER."
#elif SWITCHING_EXTRUDER_E23_SERVO_NR == 3 && !PIN_EXISTS(SERVO3)
#error "SERVO3_PIN must be defined for your SWITCHING_EXTRUDER."
#elif SWITCHING_EXTRUDER_E23_SERVO_NR == SWITCHING_EXTRUDER_SERVO_NR
#error "SWITCHING_EXTRUDER_E23_SERVO_NR should be a different extruder from SWITCHING_EXTRUDER_SERVO_NR."
#endif
#endif
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
/**
* Mixing Extruder requirements
*/
#if ENABLED(MIXING_EXTRUDER)
#if EXTRUDERS > 1
Clarify a sanity check
2019-09-18 21:06:41 +02:00
#error "For MIXING_EXTRUDER set MIXING_STEPPERS > 1 instead of EXTRUDERS > 1."
Separate SWITCHING_NOZZLE and SWITCHING_EXTRUDER
2017-05-12 21:09:40 +02:00
#elif MIXING_STEPPERS < 2
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#error "You must set MIXING_STEPPERS >= 2 for a mixing extruder."
Separate SWITCHING_NOZZLE and SWITCHING_EXTRUDER
2017-05-12 21:09:40 +02:00
#elif ENABLED(FILAMENT_SENSOR)
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#error "MIXING_EXTRUDER is incompatible with FILAMENT_SENSOR. Comment out this line to use it anyway."
Separate SWITCHING_NOZZLE and SWITCHING_EXTRUDER
2017-05-12 21:09:40 +02:00
#elif ENABLED(SWITCHING_EXTRUDER)
#error "Please select either MIXING_EXTRUDER or SWITCHING_EXTRUDER, not both."
#elif ENABLED(SINGLENOZZLE)
#error "MIXING_EXTRUDER is incompatible with SINGLENOZZLE."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
#endif
Add sanity checks to Linear Advance 1.5 (#9873)
2018-03-01 09:10:43 +01:00
/**
* Linear Advance 1.5 - Check K value range
*/
#if ENABLED(LIN_ADVANCE)
static_assert(
WITHIN(LIN_ADVANCE_K, 0, 10),
"LIN_ADVANCE_K must be a value from 0 to 10 (Changed in LIN_ADVANCE v1.5, Marlin 1.1.9)."
);
Add a warning on LA + S-Curve
2020-04-22 01:37:04 +02:00
#if ENABLED(S_CURVE_ACCELERATION) && DISABLED(EXPERIMENTAL_SCURVE)
#error "LIN_ADVANCE and S_CURVE_ACCELERATION may not play well together! Enable EXPERIMENTAL_SCURVE to continue."
#endif
Add sanity checks to Linear Advance 1.5 (#9873)
2018-03-01 09:10:43 +01:00
#endif
Park heads with electromagnet (#14023)
2019-07-01 12:55:23 +02:00
/**
* Special tool-changing options
*/
#if 1 < 0 \
+ ENABLED(SINGLENOZZLE) \
+ ENABLED(DUAL_X_CARRIAGE) \
+ ENABLED(PARKING_EXTRUDER) \
+ ENABLED(MAGNETIC_PARKING_EXTRUDER) \
+ ENABLED(SWITCHING_TOOLHEAD) \
+ ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) \
+ ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#error "Please select only one of SINGLENOZZLE, DUAL_X_CARRIAGE, PARKING_EXTRUDER, SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, or ELECTROMAGNETIC_SWITCHING_TOOLHEAD."
#endif
Added new feature for AutoParking Extruder (APE)
2017-08-13 23:35:59 +02:00
/**
MAGNETIC_PARKING_EXTRUDER (#12351)
2019-02-06 13:30:53 +01:00
* (Magnetic) Parking Extruder requirements
Added new feature for AutoParking Extruder (APE)
2017-08-13 23:35:59 +02:00
*/
Park heads with electromagnet (#14023)
2019-07-01 12:55:23 +02:00
#if ANY(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
#if ENABLED(EXT_SOLENOID)
#error "(MAGNETIC_)PARKING_EXTRUDER and EXT_SOLENOID are incompatible. (Pins are used twice.)"
MAGNETIC_PARKING_EXTRUDER (#12351)
2019-02-06 13:30:53 +01:00
#elif EXTRUDERS != 2
Park heads with electromagnet (#14023)
2019-07-01 12:55:23 +02:00
#error "(MAGNETIC_)PARKING_EXTRUDER requires exactly 2 EXTRUDERS."
MAGNETIC_PARKING_EXTRUDER (#12351)
2019-02-06 13:30:53 +01:00
#elif !defined(PARKING_EXTRUDER_PARKING_X)
Park heads with electromagnet (#14023)
2019-07-01 12:55:23 +02:00
#error "(MAGNETIC_)PARKING_EXTRUDER requires PARKING_EXTRUDER_PARKING_X."
MAGNETIC_PARKING_EXTRUDER (#12351)
2019-02-06 13:30:53 +01:00
#elif !defined(TOOLCHANGE_ZRAISE)
Park heads with electromagnet (#14023)
2019-07-01 12:55:23 +02:00
#error "(MAGNETIC_)PARKING_EXTRUDER requires TOOLCHANGE_ZRAISE."
MAGNETIC_PARKING_EXTRUDER (#12351)
2019-02-06 13:30:53 +01:00
#elif TOOLCHANGE_ZRAISE < 0
#error "TOOLCHANGE_ZRAISE must be 0 or higher."
Park heads with electromagnet (#14023)
2019-07-01 12:55:23 +02:00
#elif ENABLED(PARKING_EXTRUDER)
STM32duino - Use SDIO for onboard SD (#16756)
2020-02-04 08:24:11 +01:00
#if !PINS_EXIST(SOL0, SOL1)
Park heads with electromagnet (#14023)
2019-07-01 12:55:23 +02:00
#error "PARKING_EXTRUDER requires SOL0_PIN and SOL1_PIN."
#elif !defined(PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE) || !WITHIN(PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE, LOW, HIGH)
#error "PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE must be defined as HIGH or LOW."
#elif !defined(PARKING_EXTRUDER_SOLENOIDS_DELAY) || !WITHIN(PARKING_EXTRUDER_SOLENOIDS_DELAY, 0, 2000)
#error "PARKING_EXTRUDER_SOLENOIDS_DELAY must be between 0 and 2000 (ms)."
#endif
MAGNETIC_PARKING_EXTRUDER (#12351)
2019-02-06 13:30:53 +01:00
#endif
Added new feature for AutoParking Extruder (APE)
2017-08-13 23:35:59 +02:00
#endif
[2.0.x] SWITCHING_TOOLHEAD (#11623)
2018-09-08 08:43:24 +02:00
/**
* Switching Toolhead requirements
*/
#if ENABLED(SWITCHING_TOOLHEAD)
Apply #ifdef/#ifndef where possible
2019-09-02 06:54:41 +02:00
#ifndef SWITCHING_TOOLHEAD_SERVO_NR
[2.0.x] SWITCHING_TOOLHEAD (#11623)
2018-09-08 08:43:24 +02:00
#error "SWITCHING_TOOLHEAD requires SWITCHING_TOOLHEAD_SERVO_NR."
#elif EXTRUDERS < 2
#error "SWITCHING_TOOLHEAD requires at least 2 EXTRUDERS."
#elif NUM_SERVOS < (SWITCHING_TOOLHEAD_SERVO_NR - 1)
#if SWITCHING_TOOLHEAD_SERVO_NR == 0
#error "A SWITCHING_TOOLHEAD_SERVO_NR of 0 requires NUM_SERVOS >= 1."
#elif SWITCHING_TOOLHEAD_SERVO_NR == 1
#error "A SWITCHING_TOOLHEAD_SERVO_NR of 1 requires NUM_SERVOS >= 2."
#elif SWITCHING_TOOLHEAD_SERVO_NR == 2
#error "A SWITCHING_TOOLHEAD_SERVO_NR of 2 requires NUM_SERVOS >= 3."
#elif SWITCHING_TOOLHEAD_SERVO_NR == 3
#error "A SWITCHING_TOOLHEAD_SERVO_NR of 3 requires NUM_SERVOS >= 4."
#endif
Single Z raise value for all tool-changing / parking (#12090) * Universal tool-change Z lift * Add TOOLCHANGE_ZRAISE to example configs * Park/unpark changes to example configs * Implement DEBUG_DXC_MODE
2018-10-17 18:11:41 +02:00
#elif !defined(TOOLCHANGE_ZRAISE)
#error "SWITCHING_TOOLHEAD requires TOOLCHANGE_ZRAISE."
#elif TOOLCHANGE_ZRAISE < 0
#error "TOOLCHANGE_ZRAISE must be 0 or higher."
[2.0.x] SWITCHING_TOOLHEAD (#11623)
2018-09-08 08:43:24 +02:00
#endif
#endif
Improve magnetic dock switching toolhead (#14663)
2019-07-19 13:07:26 +02:00
/**
* (Electro)magnetic Switching Toolhead requirements
*/
#if EITHER(MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#ifndef SWITCHING_TOOLHEAD_Y_POS
Park heads with electromagnet (#14023)
2019-07-01 12:55:23 +02:00
#error "(ELECTRO)MAGNETIC_SWITCHING_TOOLHEAD requires SWITCHING_TOOLHEAD_Y_POS"
#elif !defined(SWITCHING_TOOLHEAD_X_POS)
#error "(ELECTRO)MAGNETIC_SWITCHING_TOOLHEAD requires SWITCHING_TOOLHEAD_X_POS"
#elif !defined(SWITCHING_TOOLHEAD_Z_HOP)
#error "(ELECTRO)MAGNETIC_SWITCHING_TOOLHEAD requires SWITCHING_TOOLHEAD_Z_HOP."
#elif !defined(SWITCHING_TOOLHEAD_Y_CLEAR)
#error "(ELECTRO)MAGNETIC_SWITCHING_TOOLHEAD requires SWITCHING_TOOLHEAD_Y_CLEAR."
Improve magnetic dock switching toolhead (#14663)
2019-07-19 13:07:26 +02:00
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#if ENABLED(EXT_SOLENOID)
#error "(ELECTRO)MAGNETIC_SWITCHING_TOOLHEAD and EXT_SOLENOID are incompatible. (Pins are used twice.)"
#elif !PIN_EXISTS(SOL0)
#error "(ELECTRO)MAGNETIC_SWITCHING_TOOLHEAD requires SOL0_PIN."
#endif
Park heads with electromagnet (#14023)
2019-07-01 12:55:23 +02:00
#endif
#endif
New feature: Part-Cooling Fan Multiplexer
2017-08-15 14:48:10 +02:00
/**
* Part-Cooling Fan Multiplexer requirements
*/
#if PIN_EXISTS(FANMUX1)
#if !HAS_FANMUX
#error "FANMUX0_PIN must be set before FANMUX1_PIN can be set."
#endif
#elif PIN_EXISTS(FANMUX2)
#error "FANMUX0_PIN and FANMUX1_PIN must be set before FANMUX2_PIN can be set."
#endif
Added new feature for AutoParking Extruder (APE)
2017-08-13 23:35:59 +02:00
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
/**
* Limited number of servos
*/
Fix servo count define conflict `MAX_SERVOS` => `NUM_SERVO_PLUGS`
2018-09-11 23:20:12 +02:00
#if NUM_SERVOS > NUM_SERVO_PLUGS
Fix issues, make optional
2018-08-25 04:53:42 +02:00
#error "The selected board doesn't support enough servos for your configuration. Reduce NUM_SERVOS."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
/**
Extend DEACTIVATE_SERVOS_AFTER_MOVE sanity-check As proposed in #7429
2017-08-03 23:53:55 +02:00
* Servo deactivation depends on servo endstops, switching nozzle, or switching extruder
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
*/
[2.0.x] SWITCHING_TOOLHEAD (#11623)
2018-09-08 08:43:24 +02:00
#if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE) && !HAS_Z_SERVO_PROBE && !defined(SWITCHING_NOZZLE_SERVO_NR) && !defined(SWITCHING_EXTRUDER_SERVO_NR) && !defined(SWITCHING_TOOLHEAD_SERVO_NR)
#error "Z_PROBE_SERVO_NR, switching nozzle, switching toolhead or switching extruder is required for DEACTIVATE_SERVOS_AFTER_MOVE."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
/**
* Required LCD language
*/
Update DOGLCD conditions
2019-07-14 16:29:53 +02:00
#if HAS_CHARACTER_LCD && !defined(DISPLAY_CHARSET_HD44780)
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#error "You must set DISPLAY_CHARSET_HD44780 to JAPANESE, WESTERN or CYRILLIC for your LCD controller."
#endif
/**
* Bed Heating Options - PID vs Limit Switching
*/
Extended condition macros (#13419) Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`
2019-03-17 05:43:06 +01:00
#if BOTH(PIDTEMPBED, BED_LIMIT_SWITCHING)
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#error "To use BED_LIMIT_SWITCHING you must disable PIDTEMPBED."
#endif
Enable ABL by type, support bilinear on cartesian
2016-09-26 06:17:39 +02:00
/**
Improve sanity checks with static_assert, organize
2017-06-06 14:19:27 +02:00
* Kinematics
*/
/**
* Allow only one kinematic type to be defined
Enable ABL by type, support bilinear on cartesian
2016-09-26 06:17:39 +02:00
*/
Reduce size of "only one" sanity checks
2018-03-16 08:26:03 +01:00
#if 1 < 0 \
+ ENABLED(DELTA) \
+ ENABLED(MORGAN_SCARA) \
+ ENABLED(COREXY) \
+ ENABLED(COREXZ) \
+ ENABLED(COREYZ) \
+ ENABLED(COREYX) \
+ ENABLED(COREZX) \
+ ENABLED(COREZY)
Remove deprecated SCARA option
2019-07-03 09:43:33 +02:00
#error "Please enable only one of DELTA, MORGAN_SCARA, COREXY, COREYX, COREXZ, COREZX, COREYZ, or COREZY."
Reduce size of "only one" sanity checks
2018-03-16 08:26:03 +01:00
#endif
Univeral Bed Leveling - configuration
2017-03-18 16:02:54 +01:00
/**
Improve sanity checks with static_assert, organize
2017-06-06 14:19:27 +02:00
* Delta requirements
Univeral Bed Leveling - configuration
2017-03-18 16:02:54 +01:00
*/
Improve sanity checks with static_assert, organize
2017-06-06 14:19:27 +02:00
#if ENABLED(DELTA)
NONE on combined options
2019-07-06 01:20:15 +02:00
#if NONE(USE_XMAX_PLUG, USE_YMAX_PLUG, USE_ZMAX_PLUG)
Improve sanity checks with static_assert, organize
2017-06-06 14:19:27 +02:00
#error "You probably want to use Max Endstops for DELTA!"
UBL_DELTA => UBL_SEGMENTED
2017-12-09 09:11:31 +01:00
#elif ENABLED(ENABLE_LEVELING_FADE_HEIGHT) && DISABLED(AUTO_BED_LEVELING_BILINEAR) && !UBL_SEGMENTED
Improve sanity checks with static_assert, organize
2017-06-06 14:19:27 +02:00
#error "ENABLE_LEVELING_FADE_HEIGHT on DELTA requires AUTO_BED_LEVELING_BILINEAR or AUTO_BED_LEVELING_UBL."
Followup to Menu Refactor (#12275)
2018-10-30 22:34:45 +01:00
#elif ENABLED(DELTA_AUTO_CALIBRATION) && !(HAS_BED_PROBE || HAS_LCD_MENU)
Patch G33 misuse of PROBE_MANUALLY
2017-11-08 02:34:34 +01:00
#error "DELTA_AUTO_CALIBRATION requires a probe or LCD Controller."
Fix probeless delta build (#16537)
2020-01-12 00:14:33 +01:00
#elif ENABLED(DELTA_CALIBRATION_MENU) && !HAS_LCD_MENU
#error "DELTA_CALIBRATION_MENU requires an LCD Controller."
Improve sanity checks with static_assert, organize
2017-06-06 14:19:27 +02:00
#elif ABL_GRID
#if (GRID_MAX_POINTS_X & 1) == 0 || (GRID_MAX_POINTS_Y & 1) == 0
#error "DELTA requires GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y to be odd numbers."
#elif GRID_MAX_POINTS_X < 3
#error "DELTA requires GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y to be 3 or higher."
#endif
Univeral Bed Leveling - configuration
2017-03-18 16:02:54 +01:00
#endif
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
Add warning when trying to use JD with kinematic systems (#15032)
2019-08-25 11:43:53 +02:00
/**
Enable junction deviation by default (#15481)
2019-10-09 02:42:18 +02:00
* Junction deviation is incompatible with kinematic systems.
Add warning when trying to use JD with kinematic systems (#15032)
2019-08-25 11:43:53 +02:00
*/
Add HAS_JUNCTION_DEVIATION
2020-04-24 03:49:11 +02:00
#if HAS_JUNCTION_DEVIATION && IS_KINEMATIC
Enable junction deviation by default (#15481)
2019-10-09 02:42:18 +02:00
#error "CLASSIC_JERK is required for DELTA and SCARA."
Add warning when trying to use JD with kinematic systems (#15032)
2019-08-25 11:43:53 +02:00
#endif
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
/**
* Probes
*/
Simplify some sanity checks with static_assert
2017-03-16 22:31:34 +01:00
/**
* Allow only one probe option to be defined
*/
Reduce size of "only one" sanity checks
2018-03-16 08:26:03 +01:00
#if 1 < 0 \
+ ENABLED(PROBE_MANUALLY) \
+ ENABLED(FIX_MOUNTED_PROBE) \
Add NOZZLE_AS_PROBE (no probe offsets) (#15929)
2019-12-24 07:03:08 +01:00
+ ENABLED(NOZZLE_AS_PROBE) \
Z Endstop Servo => Z Probe Servo
2018-04-02 06:54:12 +02:00
+ (HAS_Z_SERVO_PROBE && DISABLED(BLTOUCH)) \
Creality Ender 3 v2 (#17719)
2020-06-16 08:45:27 +02:00
+ ENABLED(BLTOUCH) && DISABLED(CREALITY_TOUCH) \
+ ENABLED(CREALITY_TOUCH) \
Touch-MI probe by hotends.fr (#14101) A simple Z probe using a magnet to deploy a probe. See https://youtu.be/E7Ik9PbKPl0 for the sensor description...
2019-06-15 05:19:48 +02:00
+ ENABLED(TOUCH_MI_PROBE) \
Reduce size of "only one" sanity checks
2018-03-16 08:26:03 +01:00
+ ENABLED(SOLENOID_PROBE) \
+ ENABLED(Z_PROBE_ALLEN_KEY) \
Add RACK_AND_PINION_PROBE (#12218)
2018-10-26 23:47:38 +02:00
+ ENABLED(Z_PROBE_SLED) \
Improve TMC sanity checks
2019-09-25 00:20:25 +02:00
+ ENABLED(RACK_AND_PINION_PROBE) \
+ ENABLED(SENSORLESS_PROBING)
Add NOZZLE_AS_PROBE (no probe offsets) (#15929)
2019-12-24 07:03:08 +01:00
#error "Please enable only one probe option: PROBE_MANUALLY, SENSORLESS_PROBING, BLTOUCH, FIX_MOUNTED_PROBE, NOZZLE_AS_PROBE, TOUCH_MI_PROBE, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or Z Servo."
Reduce size of "only one" sanity checks
2018-03-16 08:26:03 +01:00
#endif
Simplify some sanity checks with static_assert
2017-03-16 22:31:34 +01:00
Loosen HAS_BED_PROBE definition
2017-11-26 03:08:02 +01:00
#if HAS_BED_PROBE
Clean up probe config options
2016-09-19 06:28:11 +02:00
/**
* Z_PROBE_SLED is incompatible with DELTA
*/
Extended condition macros (#13419) Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`
2019-03-17 05:43:06 +01:00
#if BOTH(Z_PROBE_SLED, DELTA)
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#error "You cannot use Z_PROBE_SLED with DELTA."
#endif
Add support for SOLENOID_PROBE
2017-04-14 23:36:02 +02:00
/**
* SOLENOID_PROBE requirements
*/
#if ENABLED(SOLENOID_PROBE)
#if ENABLED(EXT_SOLENOID)
#error "SOLENOID_PROBE is incompatible with EXT_SOLENOID."
#elif !HAS_SOLENOID_1
#error "SOLENOID_PROBE requires SOL1_PIN. It can be added to your Configuration.h."
#endif
#endif
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
/**
* NUM_SERVOS is required for a Z servo probe
*/
Z Endstop Servo => Z Probe Servo
2018-04-02 06:54:12 +02:00
#if HAS_Z_SERVO_PROBE
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#ifndef NUM_SERVOS
Z Endstop Servo => Z Probe Servo
2018-04-02 06:54:12 +02:00
#error "You must set NUM_SERVOS for a Z servo probe (Z_PROBE_SERVO_NR)."
Sanity-check SERVO pin for servo probes
2018-08-31 22:47:35 +02:00
#elif Z_PROBE_SERVO_NR == 0 && !PIN_EXISTS(SERVO0)
#error "SERVO0_PIN must be defined for your servo or BLTOUCH probe."
#elif Z_PROBE_SERVO_NR == 1 && !PIN_EXISTS(SERVO1)
#error "SERVO1_PIN must be defined for your servo or BLTOUCH probe."
#elif Z_PROBE_SERVO_NR == 2 && !PIN_EXISTS(SERVO2)
#error "SERVO2_PIN must be defined for your servo or BLTOUCH probe."
#elif Z_PROBE_SERVO_NR == 3 && !PIN_EXISTS(SERVO3)
#error "SERVO3_PIN must be defined for your servo or BLTOUCH probe."
Z Endstop Servo => Z Probe Servo
2018-04-02 06:54:12 +02:00
#elif Z_PROBE_SERVO_NR >= NUM_SERVOS
#error "Z_PROBE_SERVO_NR must be smaller than NUM_SERVOS."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
#endif
BLTouch v3 / 3DTouch Interoperability & performance (#13814)
2019-05-08 04:25:54 +02:00
#if ENABLED(BLTOUCH)
#if BLTOUCH_DELAY < 200
#error "BLTOUCH_DELAY less than 200 is unsafe and is not supported."
Onboard (always-on) pullups support (#16144)
2019-12-12 22:49:14 +01:00
#elif DISABLED(BLTOUCH_SET_5V_MODE) && NONE(ONBOARD_ENDSTOPPULLUPS, ENDSTOPPULLUPS, ENDSTOPPULLUP_ZMIN, ENDSTOPPULLUP_ZMIN_PROBE)
BLTouch V3.1 changes (#14104)
2019-05-26 04:56:47 +02:00
#error "BLTOUCH without BLTOUCH_SET_5V_MODE requires ENDSTOPPULLUPS, ENDSTOPPULLUP_ZMIN or ENDSTOPPULLUP_ZMIN_PROBE."
BLTouch v3 / 3DTouch Interoperability & performance (#13814)
2019-05-08 04:25:54 +02:00
#endif
#endif
Add RACK_AND_PINION_PROBE (#12218)
2018-10-26 23:47:38 +02:00
#if ENABLED(RACK_AND_PINION_PROBE) && !(defined(Z_PROBE_DEPLOY_X) && defined(Z_PROBE_RETRACT_X))
#error "RACK_AND_PINION_PROBE requires Z_PROBE_DEPLOY_X and Z_PROBE_RETRACT_X."
#endif
Touch-MI probe by hotends.fr (#14101) A simple Z probe using a magnet to deploy a probe. See https://youtu.be/E7Ik9PbKPl0 for the sensor description...
2019-06-15 05:19:48 +02:00
/**
* Touch-MI probe requirements
*/
#if ENABLED(TOUCH_MI_PROBE)
Fix Touch-MI sanity checks (#14316)
2019-06-18 00:46:14 +02:00
#if DISABLED(Z_SAFE_HOMING)
Touch-MI probe by hotends.fr (#14101) A simple Z probe using a magnet to deploy a probe. See https://youtu.be/E7Ik9PbKPl0 for the sensor description...
2019-06-15 05:19:48 +02:00
#error "TOUCH_MI_PROBE requires Z_SAFE_HOMING."
Fix Touch-MI sanity checks (#14316)
2019-06-18 00:46:14 +02:00
#elif !defined(TOUCH_MI_RETRACT_Z)
Touch-MI probe by hotends.fr (#14101) A simple Z probe using a magnet to deploy a probe. See https://youtu.be/E7Ik9PbKPl0 for the sensor description...
2019-06-15 05:19:48 +02:00
#error "TOUCH_MI_PROBE requires TOUCH_MI_RETRACT_Z."
#elif defined(Z_AFTER_PROBING)
#error "TOUCH_MI_PROBE requires Z_AFTER_PROBING to be disabled."
#elif Z_HOMING_HEIGHT < 10
#error "TOUCH_MI_PROBE requires Z_HOMING_HEIGHT >= 10."
#elif Z_MIN_PROBE_ENDSTOP_INVERTING
#error "TOUCH_MI_PROBE requires Z_MIN_PROBE_ENDSTOP_INVERTING to be set to false."
#elif DISABLED(BABYSTEP_ZPROBE_OFFSET)
#error "TOUCH_MI_PROBE requires BABYSTEPPING with BABYSTEP_ZPROBE_OFFSET."
Reorganize HAL (#14832)
2019-09-03 02:49:58 +02:00
#elif !HAS_RESUME_CONTINUE
#error "TOUCH_MI_PROBE currently requires an LCD controller or EMERGENCY_PARSER."
Touch-MI probe by hotends.fr (#14101) A simple Z probe using a magnet to deploy a probe. See https://youtu.be/E7Ik9PbKPl0 for the sensor description...
2019-06-15 05:19:48 +02:00
#endif
#endif
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
/**
Clean up probe config options
2016-09-19 06:28:11 +02:00
* Require pin options and pins to be defined
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
*/
Add TMC2130 sensorless probing
2018-09-09 21:59:12 +02:00
#if ENABLED(SENSORLESS_PROBING)
Add TMC2209 support (#14249)
2019-06-20 22:47:50 +02:00
#if ENABLED(DELTA) && !(AXIS_HAS_STALLGUARD(X) && AXIS_HAS_STALLGUARD(Y) && AXIS_HAS_STALLGUARD(Z))
#error "SENSORLESS_PROBING requires TMC2130/2160/2209/5130/5160 drivers on X, Y, and Z."
#elif !AXIS_HAS_STALLGUARD(Z)
#error "SENSORLESS_PROBING requires a TMC2130/2160/2209/5130/5160 driver on Z."
Add TMC2130 sensorless probing
2018-09-09 21:59:12 +02:00
#endif
#elif ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
Drop the Z_MIN_PROBE_ENDSTOP option (#13276)
2019-03-01 07:27:45 +01:00
#if DISABLED(USE_ZMIN_PLUG)
Clean up probe config options
2016-09-19 06:28:11 +02:00
#error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires USE_ZMIN_PLUG to be enabled."
#elif !HAS_Z_MIN
#error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires the Z_MIN_PIN to be defined."
Fix a sanity check
2018-09-29 07:24:12 +02:00
#elif Z_MIN_PROBE_ENDSTOP_INVERTING != Z_MIN_ENDSTOP_INVERTING
Sanity-check inverting and pullups for Z probe and Z endstop `Z_MIN_ENDSTOP_INVERTING` must match `Z_MIN_PROBE_ENDSTOP_INVERTING` when using `Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN`. This is easy to overlook.
2016-12-07 10:37:37 +01:00
#error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires Z_MIN_ENDSTOP_INVERTING to match Z_MIN_PROBE_ENDSTOP_INVERTING."
Move probe pin sanity checks out of ABL block
2016-08-03 05:55:17 +02:00
#endif
Drop the Z_MIN_PROBE_ENDSTOP option (#13276)
2019-03-01 07:27:45 +01:00
#elif !HAS_Z_MIN_PROBE_PIN
#error "Z_MIN_PROBE_PIN must be defined if Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN is not enabled."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
Fix MIN_PROBE_EDGE bug in default ABL G29 (#16367)
2020-01-04 00:46:26 +01:00
#if ENABLED(NOZZLE_AS_PROBE)
constexpr float sanity_nozzle_to_probe_offset[] = NOZZLE_TO_PROBE_OFFSET;
static_assert(sanity_nozzle_to_probe_offset[0] == 0.0 && sanity_nozzle_to_probe_offset[1] == 0.0,
"NOZZLE_AS_PROBE requires the X,Y offsets in NOZZLE_TO_PROBE_OFFSET to be 0,0.");
#endif
#if DISABLED(NOZZLE_AS_PROBE)
Probe margin. Bump config version (#18140) Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-06-03 03:41:50 +02:00
static_assert(PROBING_MARGIN >= 0, "PROBING_MARGIN must be >= 0.");
static_assert(PROBING_MARGIN_BACK >= 0, "PROBING_MARGIN_BACK must be >= 0.");
static_assert(PROBING_MARGIN_FRONT >= 0, "PROBING_MARGIN_FRONT must be >= 0.");
static_assert(PROBING_MARGIN_LEFT >= 0, "PROBING_MARGIN_LEFT must be >= 0.");
static_assert(PROBING_MARGIN_RIGHT >= 0, "PROBING_MARGIN_RIGHT must be >= 0.");
Fix MIN_PROBE_EDGE bug in default ABL G29 (#16367)
2020-01-04 00:46:26 +01:00
#endif
Probe margin. Bump config version (#18140) Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-06-03 03:41:50 +02:00
#define _MARGIN(A) TERN(IS_SCARA, SCARA_PRINTABLE_RADIUS, TERN(DELTA, DELTA_PRINTABLE_RADIUS, A##_CENTER))
static_assert(PROBING_MARGIN < _MARGIN(X), "PROBING_MARGIN is too large.");
static_assert(PROBING_MARGIN_BACK < _MARGIN(Y), "PROBING_MARGIN_BACK is too large.");
static_assert(PROBING_MARGIN_FRONT < _MARGIN(Y), "PROBING_MARGIN_FRONT is too large.");
static_assert(PROBING_MARGIN_LEFT < _MARGIN(X), "PROBING_MARGIN_LEFT is too large.");
static_assert(PROBING_MARGIN_RIGHT < _MARGIN(X), "PROBING_MARGIN_RIGHT is too large.");
#undef _MARGIN
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
/**
* Make sure Z raise values are set
*/
Spacing adjustments
2017-10-02 04:33:52 +02:00
#ifndef Z_CLEARANCE_DEPLOY_PROBE
Try on "CLEARANCE" for size
2016-09-20 10:49:42 +02:00
#error "You must define Z_CLEARANCE_DEPLOY_PROBE in your configuration."
#elif !defined(Z_CLEARANCE_BETWEEN_PROBES)
#error "You must define Z_CLEARANCE_BETWEEN_PROBES in your configuration."
#elif Z_CLEARANCE_DEPLOY_PROBE < 0
#error "Probes need Z_CLEARANCE_DEPLOY_PROBE >= 0."
#elif Z_CLEARANCE_BETWEEN_PROBES < 0
#error "Probes need Z_CLEARANCE_BETWEEN_PROBES >= 0."
[2.0.x] Add Z_AFTER_PROBING option (#10058) Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
2018-03-11 19:07:55 +01:00
#elif Z_AFTER_PROBING < 0
#error "Probes need Z_AFTER_PROBING >= 0."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
Fix TERN typo, EXTRA_PROBING Co-Authored-By: Matthew Kennedy <mattkenn4545@gmail.com>
2020-05-10 11:40:19 +02:00
#if MULTIPLE_PROBING > 0 || EXTRA_PROBING > 0
#if MULTIPLE_PROBING == 0
Add Extra Probing option, discarding outliers (#14338)
2019-06-22 02:02:26 +02:00
#error "EXTRA_PROBING requires MULTIPLE_PROBING."
#elif MULTIPLE_PROBING < 2
#error "MULTIPLE_PROBING must be 2 or more."
#elif MULTIPLE_PROBING <= EXTRA_PROBING
#error "EXTRA_PROBING must be less than MULTIPLE_PROBING."
#endif
PROBE_DOUBLE_TOUCH => MULTIPLE_PROBING
2017-12-07 23:33:51 +01:00
#endif
Add Z_PROBE_LOW_POINT to prevent damage
2018-04-09 08:46:23 +02:00
#if Z_PROBE_LOW_POINT > 0
#error "Z_PROBE_LOW_POINT must be less than or equal to 0."
#endif
Don't assert safe homing for delta/scara
2020-02-14 02:20:37 +01:00
#if HOMING_Z_WITH_PROBE && IS_CARTESIAN && DISABLED(Z_SAFE_HOMING)
Recommend Z Safe Homing Co-Authored-By: Vertabreaker <opyrus@hotmail.com>
2020-02-11 14:40:07 +01:00
#error "Z_SAFE_HOMING is recommended when homing with a probe. Enable it or comment out this line to continue."
#endif
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#else
/**
* Require some kind of probe for bed leveling and probe testing
*/
Update some ABL/UBL conditionals
2019-02-25 03:29:03 +01:00
#if HAS_ABL_NOT_UBL && !PROBE_SELECTED
More useful ENABLED / DISABLED macros (#17054)
2020-03-08 05:20:41 +01:00
#error "Auto Bed Leveling requires one of these: PROBE_MANUALLY, SENSORLESS_PROBING, BLTOUCH, FIX_MOUNTED_PROBE, NOZZLE_AS_PROBE, TOUCH_MI_PROBE, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or a Z Servo."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
Patch G33 misuse of PROBE_MANUALLY
2017-11-08 02:34:34 +01:00
#if ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST)
Add NOZZLE_AS_PROBE (no probe offsets) (#15929)
2019-12-24 07:03:08 +01:00
#error "Z_MIN_PROBE_REPEATABILITY_TEST requires a probe: FIX_MOUNTED_PROBE, NOZZLE_AS_PROBE, BLTOUCH, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or Z Servo."
Patch G33 misuse of PROBE_MANUALLY
2017-11-08 02:34:34 +01:00
#endif
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
Sanity check for a real probe with M48
2017-07-02 09:26:35 +02:00
#endif
Improve sanity checks with static_assert, organize
2017-06-06 14:19:27 +02:00
/**
* Allow only one bed leveling option to be defined
*/
Reduce size of "only one" sanity checks
2018-03-16 08:26:03 +01:00
#if 1 < 0 \
+ ENABLED(AUTO_BED_LEVELING_LINEAR) \
+ ENABLED(AUTO_BED_LEVELING_3POINT) \
+ ENABLED(AUTO_BED_LEVELING_BILINEAR) \
+ ENABLED(AUTO_BED_LEVELING_UBL) \
+ ENABLED(MESH_BED_LEVELING)
#error "Select only one of: MESH_BED_LEVELING, AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_BILINEAR or AUTO_BED_LEVELING_UBL."
#endif
Improve sanity checks with static_assert, organize
2017-06-06 14:19:27 +02:00
/**
* Bed Leveling Requirements
*/
#if ENABLED(AUTO_BED_LEVELING_UBL)
/**
* Unified Bed Leveling
*/
Patch G33 misuse of PROBE_MANUALLY
2017-11-08 02:34:34 +01:00
// Hide PROBE_MANUALLY from the rest of the code
#undef PROBE_MANUALLY
Improve sanity checks with static_assert, organize
2017-06-06 14:19:27 +02:00
#if IS_SCARA
#error "AUTO_BED_LEVELING_UBL does not yet support SCARA printers."
#elif DISABLED(EEPROM_SETTINGS)
#error "AUTO_BED_LEVELING_UBL requires EEPROM_SETTINGS. Please update your configuration."
#elif !WITHIN(GRID_MAX_POINTS_X, 3, 15) || !WITHIN(GRID_MAX_POINTS_Y, 3, 15)
#error "GRID_MAX_POINTS_[XY] must be a whole number between 3 and 15."
Better RESTORE_LEVELING_AFTER_G28 sanity-check As suggested by @GMagician
2018-04-08 10:19:37 +02:00
#elif !defined(RESTORE_LEVELING_AFTER_G28)
#error "AUTO_BED_LEVELING_UBL used to enable RESTORE_LEVELING_AFTER_G28. To keep this behavior enable RESTORE_LEVELING_AFTER_G28. Otherwise define it as 'false'."
Improve sanity checks with static_assert, organize
2017-06-06 14:19:27 +02:00
#endif
Patch G33 misuse of PROBE_MANUALLY
2017-11-08 02:34:34 +01:00
Update some ABL/UBL conditionals
2019-02-25 03:29:03 +01:00
#elif HAS_ABL_NOT_UBL
Improve sanity checks with static_assert, organize
2017-06-06 14:19:27 +02:00
/**
* Auto Bed Leveling
*/
/**
* Delta and SCARA have limited bed leveling options
*/
#if IS_SCARA && DISABLED(AUTO_BED_LEVELING_BILINEAR)
Consolidate 3-point leveling point options
2018-03-19 07:22:21 +01:00
#error "SCARA machines can only use the AUTO_BED_LEVELING_BILINEAR leveling option."
Improve sanity checks with static_assert, organize
2017-06-06 14:19:27 +02:00
#endif
#elif ENABLED(MESH_BED_LEVELING)
Patch G33 misuse of PROBE_MANUALLY
2017-11-08 02:34:34 +01:00
// Hide PROBE_MANUALLY from the rest of the code
#undef PROBE_MANUALLY
Improve sanity checks with static_assert, organize
2017-06-06 14:19:27 +02:00
/**
* Mesh Bed Leveling
*/
#if ENABLED(DELTA)
Clarify some motion code
2017-11-09 05:13:33 +01:00
#error "MESH_BED_LEVELING is not compatible with DELTA printers."
Improve sanity checks with static_assert, organize
2017-06-06 14:19:27 +02:00
#elif GRID_MAX_POINTS_X > 9 || GRID_MAX_POINTS_Y > 9
#error "GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y must be less than 10 for MBL."
#endif
#endif
Fix issues with no hotend / bed / fan (#18395)
2020-06-25 02:44:50 +02:00
#if HAS_MESH && HAS_CLASSIC_JERK
static_assert(DEFAULT_ZJERK > 0.1, "Low DEFAULT_ZJERK values are incompatible with mesh-based leveling.");
#endif
#if ENABLED(G26_MESH_VALIDATION)
#if !EXTRUDERS
#error "G26_MESH_VALIDATION requires at least one extruder."
#elif !HAS_MESH
#error "G26_MESH_VALIDATION requires MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, or AUTO_BED_LEVELING_UBL."
Fix bad sanitycheck (#12748)
2018-12-30 17:44:15 +01:00
#endif
Config option G26_MESH_VALIDATION for all meshes
2017-11-24 00:49:05 +01:00
#endif
Apply composite tests
2020-04-24 04:42:38 +02:00
#if ENABLED(MESH_EDIT_GFX_OVERLAY) && !BOTH(AUTO_BED_LEVELING_UBL, HAS_GRAPHICAL_LCD)
Followup for MESH_EDIT_GFX_OVERLAY
2017-11-24 20:35:08 +01:00
#error "MESH_EDIT_GFX_OVERLAY requires AUTO_BED_LEVELING_UBL and a Graphical LCD."
#endif
Update some ABL/UBL conditionals
2019-02-25 03:29:03 +01:00
#if ENABLED(G29_RETRY_AND_RECOVER)
#if ENABLED(AUTO_BED_LEVELING_UBL)
#error "G29_RETRY_AND_RECOVER is not compatible with UBL."
#elif ENABLED(MESH_BED_LEVELING)
#error "G29_RETRY_AND_RECOVER is not compatible with MESH_BED_LEVELING."
#endif
Fixes G29_with_retry behavior (#11045) * Fix G29 (ABL) retry behavior
2018-06-30 03:48:11 +02:00
#endif
Simplify some sanity checks with static_assert
2017-03-16 22:31:34 +01:00
/**
Add a "manual" option for ABL
2017-03-13 06:24:22 +01:00
* LCD_BED_LEVELING requirements
Simplify some sanity checks with static_assert
2017-03-16 22:31:34 +01:00
*/
Prevent illegal leveling combinations Addressing issue #6901
2017-06-01 04:44:05 +02:00
#if ENABLED(LCD_BED_LEVELING)
More advanced pause tweaks (#12356) * Followup to LCD_TIMEOUT_TO_STATUS=0 * Make continuous purge screen fit 20x4 * Unify purge message modes * Preserve last-set pause header mode
2018-11-07 02:25:57 +01:00
#if !HAS_LCD_MENU
#error "LCD_BED_LEVELING requires a programmable LCD controller."
Update some ABL/UBL conditionals
2019-02-25 03:29:03 +01:00
#elif !(ENABLED(MESH_BED_LEVELING) || HAS_ABL_NOT_UBL)
LCD_BED_LEVELING enables a sub-menu for ABL
2018-05-01 14:10:43 +02:00
#error "LCD_BED_LEVELING requires MESH_BED_LEVELING or AUTO_BED_LEVELING."
Prevent illegal leveling combinations Addressing issue #6901
2017-06-01 04:44:05 +02:00
#endif
Simplify some sanity checks with static_assert
2017-03-16 22:31:34 +01:00
#endif
Sanity check homing bumps
2016-09-23 00:10:20 +02:00
/**
Option to force X or Y to home first when homing the other axis
2018-02-16 16:59:44 +01:00
* Homing
Sanity check homing bumps
2016-09-23 00:10:20 +02:00
*/
Update home bump assert
2020-04-27 12:31:37 +02:00
constexpr float hbm[] = HOMING_BUMP_MM;
static_assert(COUNT(hbm) == XYZ, "HOMING_BUMP_MM requires X, Y, and Z elements.");
static_assert(hbm[X_AXIS] >= 0, "HOMING_BUMP_MM.X must be greater than or equal to 0.");
static_assert(hbm[Y_AXIS] >= 0, "HOMING_BUMP_MM.Y must be greater than or equal to 0.");
static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal to 0.");
Sanity check homing bumps
2016-09-23 00:10:20 +02:00
Option to force X or Y to home first when homing the other axis
2018-02-16 16:59:44 +01:00
#if ENABLED(CODEPENDENT_XY_HOMING)
#if ENABLED(QUICK_HOME)
#error "QUICK_HOME is incompatible with CODEPENDENT_XY_HOMING."
#elif IS_KINEMATIC
#error "CODEPENDENT_XY_HOMING requires a Cartesian setup."
#endif
#endif
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
/**
* Make sure Z_SAFE_HOMING point is reachable
*/
#if ENABLED(Z_SAFE_HOMING)
Allow Z_SAFE_HOMING_POINT outside bed (#16945)
2020-02-24 17:40:12 +01:00
static_assert(WITHIN(Z_SAFE_HOMING_X_POINT, X_MIN_POS, X_MAX_POS), "Z_SAFE_HOMING_X_POINT can't be reached by the nozzle.");
static_assert(WITHIN(Z_SAFE_HOMING_Y_POINT, Y_MIN_POS, Y_MAX_POS), "Z_SAFE_HOMING_Y_POINT can't be reached by the nozzle.");
Simplify old safe homing sanity check
2020-02-11 17:07:24 +01:00
#endif
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
DISABLE_[XYZ] compatibility check DISABLE_[XYZ] is incompatible with HOME_AFTER_DEACTIVATE and Z_SAFE_HOMING
2017-07-04 02:23:53 +02:00
/**
* Make sure DISABLE_[XYZ] compatible with selected homing options
*/
Extended condition macros (#13419) Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`
2019-03-17 05:43:06 +01:00
#if ANY(DISABLE_X, DISABLE_Y, DISABLE_Z)
#if EITHER(HOME_AFTER_DEACTIVATE, Z_SAFE_HOMING)
Option to disable all volumetric extrusion
2017-12-20 02:44:11 +01:00
#error "DISABLE_[XYZ] is not compatible with HOME_AFTER_DEACTIVATE or Z_SAFE_HOMING."
DISABLE_[XYZ] compatibility check DISABLE_[XYZ] is incompatible with HOME_AFTER_DEACTIVATE and Z_SAFE_HOMING
2017-07-04 02:23:53 +02:00
#endif
G28 O respects HOME_AFTER_DEACTIVATE Addressing #11271
2018-11-05 09:19:55 +01:00
#endif
DISABLE_[XYZ] compatibility check DISABLE_[XYZ] is incompatible with HOME_AFTER_DEACTIVATE and Z_SAFE_HOMING
2017-07-04 02:23:53 +02:00
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
/**
* Filament Width Sensor
*/
Option to disable all volumetric extrusion
2017-12-20 02:44:11 +01:00
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if !HAS_FILAMENT_WIDTH_SENSOR
#error "FILAMENT_WIDTH_SENSOR requires a FILWIDTH_PIN to be defined."
#elif ENABLED(NO_VOLUMETRICS)
#error "FILAMENT_WIDTH_SENSOR requires NO_VOLUMETRICS to be disabled."
#endif
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
Power monitor and display (#17437)
2020-06-18 22:23:03 +02:00
/**
* System Power Sensor
*/
#if ENABLED(POWER_MONITOR_CURRENT) && !PIN_EXISTS(POWER_MONITOR_CURRENT)
#error "POWER_MONITOR_CURRENT requires a valid POWER_MONITOR_CURRENT_PIN."
#elif ENABLED(POWER_MONITOR_VOLTAGE) && !PIN_EXISTS(POWER_MONITOR_VOLTAGE)
#error "POWER_MONITOR_VOLTAGE requires POWER_MONITOR_VOLTAGE_PIN to be defined."
#elif BOTH(POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE) && POWER_MONITOR_CURRENT_PIN == POWER_MONITOR_VOLTAGE_PIN
#error "POWER_MONITOR_CURRENT_PIN and POWER_MONITOR_VOLTAGE_PIN must be different."
#endif
Add volumetric extrusion limit (#17017)
2020-06-08 10:24:46 +02:00
/**
* Volumetric Extruder Limit
*/
#if ENABLED(VOLUMETRIC_EXTRUDER_LIMIT)
#if ENABLED(NO_VOLUMETRICS)
#error "VOLUMETRIC_EXTRUDER_LIMIT requires NO_VOLUMETRICS to be disabled."
#elif MIN_STEPS_PER_SEGMENT > 1
#error "VOLUMETRIC_EXTRUDER_LIMIT is not compatible with MIN_STEPS_PER_SEGMENT greater than 1."
#endif
#endif
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
/**
* ULTIPANEL encoder
*/
NONE on combined options
2019-07-06 01:20:15 +02:00
#if ENABLED(ULTIPANEL) && NONE(NEWPANEL, SR_LCD_2W_NL) && !defined(SHIFT_CLK)
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#error "ULTIPANEL requires some kind of encoder."
#endif
#if ENCODER_PULSES_PER_STEP < 0
#error "ENCODER_PULSES_PER_STEP should not be negative, use REVERSE_MENU_DIRECTION instead."
#endif
/**
* SAV_3DGLCD display options
*/
[2.0.x] Arrange LCD options by type (#10630)
2018-05-07 02:16:55 +02:00
#if ENABLED(SAV_3DGLCD)
NONE on combined options
2019-07-06 01:20:15 +02:00
#if NONE(U8GLIB_SSD1306, U8GLIB_SH1106)
[2.0.x] Arrange LCD options by type (#10630)
2018-05-07 02:16:55 +02:00
#error "Enable a SAV_3DGLCD display type: U8GLIB_SSD1306 or U8GLIB_SH1106."
Extended condition macros (#13419) Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`
2019-03-17 05:43:06 +01:00
#elif BOTH(U8GLIB_SSD1306, U8GLIB_SH1106)
[2.0.x] Arrange LCD options by type (#10630)
2018-05-07 02:16:55 +02:00
#error "Only enable one SAV_3DGLCD display type: U8GLIB_SSD1306 or U8GLIB_SH1106."
#endif
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
/**
* Allen Key
* Deploying the Allen Key probe uses big moves in z direction. Too dangerous for an unhomed z-axis.
*/
#if ENABLED(Z_PROBE_ALLEN_KEY) && (Z_HOME_DIR < 0) && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
Various Laser / Spindle improvements (#15335)
2020-04-03 02:31:08 +02:00
#error "You can't home to a z min endstop with a Z_PROBE_ALLEN_KEY."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
/**
* Dual X Carriage requirements
*/
#if ENABLED(DUAL_X_CARRIAGE)
Park heads with electromagnet (#14023)
2019-07-01 12:55:23 +02:00
#if EXTRUDERS < 2
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#error "DUAL_X_CARRIAGE requires 2 (or more) extruders."
Implement reversed CORE options
2016-11-06 05:47:38 +01:00
#elif CORE_IS_XY || CORE_IS_XZ
#error "DUAL_X_CARRIAGE cannot be used with COREXY, COREYX, COREXZ, or COREZX."
Quad Z stepper support (#16277)
2020-01-20 06:35:07 +01:00
#elif !GOOD_AXIS_PINS(X2)
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#error "DUAL_X_CARRIAGE requires X2 stepper pins to be defined."
#elif !HAS_X_MAX
#error "DUAL_X_CARRIAGE requires USE_XMAX_PLUG and an X Max Endstop."
#elif !defined(X2_HOME_POS) || !defined(X2_MIN_POS) || !defined(X2_MAX_POS)
#error "DUAL_X_CARRIAGE requires X2_HOME_POS, X2_MIN_POS, and X2_MAX_POS."
#elif X_HOME_DIR != -1 || X2_HOME_DIR != 1
#error "DUAL_X_CARRIAGE requires X_HOME_DIR -1 and X2_HOME_DIR 1."
#endif
Park heads with electromagnet (#14023)
2019-07-01 12:55:23 +02:00
#endif
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
Quad Z stepper support (#16277)
2020-01-20 06:35:07 +01:00
#undef GOOD_AXIS_PINS
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
/**
* Make sure auto fan pins don't conflict with the fan pin
*/
#if HAS_AUTO_FAN
#if HAS_FAN0
Rename auto fan pins and add auto fan flags
2016-10-23 01:25:42 +02:00
#if E0_AUTO_FAN_PIN == FAN_PIN
#error "You cannot set E0_AUTO_FAN_PIN equal to FAN_PIN."
#elif E1_AUTO_FAN_PIN == FAN_PIN
#error "You cannot set E1_AUTO_FAN_PIN equal to FAN_PIN."
#elif E2_AUTO_FAN_PIN == FAN_PIN
#error "You cannot set E2_AUTO_FAN_PIN equal to FAN_PIN."
#elif E3_AUTO_FAN_PIN == FAN_PIN
#error "You cannot set E3_AUTO_FAN_PIN equal to FAN_PIN."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
#endif
#endif
Implement USE_CONTROLLER_FAN as a feature
2017-05-03 03:18:31 +02:00
#if HAS_FAN0 && CONTROLLER_FAN_PIN == FAN_PIN
#error "You cannot set CONTROLLER_FAN_PIN equal to FAN_PIN."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
Fixed USE_CONTROLLER_FAN #define usage
2017-05-04 23:38:29 +02:00
#if ENABLED(USE_CONTROLLER_FAN)
Implement USE_CONTROLLER_FAN as a feature
2017-05-03 03:18:31 +02:00
#if !HAS_CONTROLLER_FAN
#error "USE_CONTROLLER_FAN requires a CONTROLLER_FAN_PIN. Define in Configuration_adv.h."
#elif E0_AUTO_FAN_PIN == CONTROLLER_FAN_PIN
#error "You cannot set E0_AUTO_FAN_PIN equal to CONTROLLER_FAN_PIN."
#elif E1_AUTO_FAN_PIN == CONTROLLER_FAN_PIN
#error "You cannot set E1_AUTO_FAN_PIN equal to CONTROLLER_FAN_PIN."
#elif E2_AUTO_FAN_PIN == CONTROLLER_FAN_PIN
#error "You cannot set E2_AUTO_FAN_PIN equal to CONTROLLER_FAN_PIN."
#elif E3_AUTO_FAN_PIN == CONTROLLER_FAN_PIN
#error "You cannot set E3_AUTO_FAN_PIN equal to CONTROLLER_FAN_PIN."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
#endif
Update the Ender-4 example config (#12131) - Enable filament change menu - Enable bed-PID - Enable s-curve acceleration - Enable some menu items - Update from Skorpi's new version - Fix extruder steps, deactivate nozzle clean feature
2018-10-17 22:49:52 +02:00
/**
Sanity-check for CASE_LIGHT_PIN (#14518)
2019-07-06 03:18:43 +02:00
* Case Light requirements
Update the Ender-4 example config (#12131) - Enable filament change menu - Enable bed-PID - Enable s-curve acceleration - Enable some menu items - Update from Skorpi's new version - Fix extruder steps, deactivate nozzle clean feature
2018-10-17 22:49:52 +02:00
*/
Sanity-check for CASE_LIGHT_PIN (#14518)
2019-07-06 03:18:43 +02:00
#if ENABLED(CASE_LIGHT_ENABLE)
#if !PIN_EXISTS(CASE_LIGHT)
#error "CASE_LIGHT_ENABLE requires CASE_LIGHT_PIN to be defined."
#elif CASE_LIGHT_PIN == FAN_PIN
#error "CASE_LIGHT_PIN conflicts with FAN_PIN. Resolve before continuing."
#endif
Update the Ender-4 example config (#12131) - Enable filament change menu - Enable bed-PID - Enable s-curve acceleration - Enable some menu items - Update from Skorpi's new version - Fix extruder steps, deactivate nozzle clean feature
2018-10-17 22:49:52 +02:00
#endif
Configurable Thermistor (#13888)
2019-05-07 01:51:06 +02:00
/**
* Required custom thermistor settings
*/
#if ENABLED(HEATER_0_USER_THERMISTOR) && !(defined(HOTEND0_PULLUP_RESISTOR_OHMS) && defined(HOTEND0_RESISTANCE_25C_OHMS) && defined(HOTEND0_BETA))
#error "TEMP_SENSOR_0 1000 requires HOTEND0_PULLUP_RESISTOR_OHMS, HOTEND0_RESISTANCE_25C_OHMS and HOTEND0_BETA in Configuration_adv.h."
#elif ENABLED(HEATER_1_USER_THERMISTOR) && !(defined(HOTEND1_PULLUP_RESISTOR_OHMS) && defined(HOTEND1_RESISTANCE_25C_OHMS) && defined(HOTEND1_BETA))
#error "TEMP_SENSOR_1 1000 requires HOTEND1_PULLUP_RESISTOR_OHMS, HOTEND1_RESISTANCE_25C_OHMS and HOTEND1_BETA in Configuration_adv.h."
#elif ENABLED(HEATER_2_USER_THERMISTOR) && !(defined(HOTEND2_PULLUP_RESISTOR_OHMS) && defined(HOTEND2_RESISTANCE_25C_OHMS) && defined(HOTEND2_BETA))
#error "TEMP_SENSOR_2 1000 requires HOTEND2_PULLUP_RESISTOR_OHMS, HOTEND2_RESISTANCE_25C_OHMS and HOTEND2_BETA in Configuration_adv.h."
#elif ENABLED(HEATER_3_USER_THERMISTOR) && !(defined(HOTEND3_PULLUP_RESISTOR_OHMS) && defined(HOTEND3_RESISTANCE_25C_OHMS) && defined(HOTEND3_BETA))
#error "TEMP_SENSOR_3 1000 requires HOTEND3_PULLUP_RESISTOR_OHMS, HOTEND3_RESISTANCE_25C_OHMS and HOTEND3_BETA in Configuration_adv.h."
#elif ENABLED(HEATER_4_USER_THERMISTOR) && !(defined(HOTEND4_PULLUP_RESISTOR_OHMS) && defined(HOTEND4_RESISTANCE_25C_OHMS) && defined(HOTEND4_BETA))
#error "TEMP_SENSOR_4 1000 requires HOTEND4_PULLUP_RESISTOR_OHMS, HOTEND4_RESISTANCE_25C_OHMS and HOTEND4_BETA in Configuration_adv.h."
#elif ENABLED(HEATER_5_USER_THERMISTOR) && !(defined(HOTEND5_PULLUP_RESISTOR_OHMS) && defined(HOTEND5_RESISTANCE_25C_OHMS) && defined(HOTEND5_BETA))
#error "TEMP_SENSOR_5 1000 requires HOTEND5_PULLUP_RESISTOR_OHMS, HOTEND5_RESISTANCE_25C_OHMS and HOTEND5_BETA in Configuration_adv.h."
BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (#16595)
2020-01-25 09:13:39 +01:00
#elif ENABLED(HEATER_6_USER_THERMISTOR) && !(defined(HOTEND6_PULLUP_RESISTOR_OHMS) && defined(HOTEND6_RESISTANCE_25C_OHMS) && defined(HOTEND6_BETA))
#error "TEMP_SENSOR_6 1000 requires HOTEND6_PULLUP_RESISTOR_OHMS, HOTEND6_RESISTANCE_25C_OHMS and HOTEND6_BETA in Configuration_adv.h."
#elif ENABLED(HEATER_7_USER_THERMISTOR) && !(defined(HOTEND7_PULLUP_RESISTOR_OHMS) && defined(HOTEND7_RESISTANCE_25C_OHMS) && defined(HOTEND7_BETA))
#error "TEMP_SENSOR_7 1000 requires HOTEND7_PULLUP_RESISTOR_OHMS, HOTEND7_RESISTANCE_25C_OHMS and HOTEND7_BETA in Configuration_adv.h."
Update defines for patched temperature macros (#14161)
2019-05-29 00:43:31 +02:00
#elif ENABLED(HEATER_BED_USER_THERMISTOR) && !(defined(BED_PULLUP_RESISTOR_OHMS) && defined(BED_RESISTANCE_25C_OHMS) && defined(BED_BETA))
Configurable Thermistor (#13888)
2019-05-07 01:51:06 +02:00
#error "TEMP_SENSOR_BED 1000 requires BED_PULLUP_RESISTOR_OHMS, BED_RESISTANCE_25C_OHMS and BED_BETA in Configuration_adv.h."
Update defines for patched temperature macros (#14161)
2019-05-29 00:43:31 +02:00
#elif ENABLED(HEATER_CHAMBER_USER_THERMISTOR) && !(defined(CHAMBER_PULLUP_RESISTOR_OHMS) && defined(CHAMBER_RESISTANCE_25C_OHMS) && defined(CHAMBER_BETA))
Configurable Thermistor (#13888)
2019-05-07 01:51:06 +02:00
#error "TEMP_SENSOR_CHAMBER 1000 requires CHAMBER_PULLUP_RESISTOR_OHMS, CHAMBER_RESISTANCE_25C_OHMS and CHAMBER_BETA in Configuration_adv.h."
#endif
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
/**
Per-Hotend Default PIDs (#18483)
2020-07-01 23:18:20 +02:00
* A Sensor ID has to be set for each heater
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
*/
Add HAS_HOTEND, etc.
2020-04-20 06:56:55 +02:00
#if HAS_MULTI_HOTEND
Support two MAX6675 thermocouples (#8686)
2018-11-17 01:20:33 +01:00
#if ENABLED(HEATER_1_USES_MAX6675) && !PIN_EXISTS(MAX6675_SS2)
#error "MAX6675_SS2_PIN (required for TEMP_SENSOR_1) not defined for this board."
#elif TEMP_SENSOR_1 == 0
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#error "TEMP_SENSOR_1 is required with 2 or more HOTENDS."
Extended condition macros (#13419) Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`
2019-03-17 05:43:06 +01:00
#elif !ANY_PIN(TEMP_1, MAX6675_SS2)
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#error "TEMP_1_PIN not defined for this board."
Allow redundant temp sensor with SINGLENOZZLE (#15650)
2019-10-24 19:23:06 +02:00
#elif ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
#error "HOTENDS must be 1 with TEMP_SENSOR_1_AS_REDUNDANT."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
#if HOTENDS > 2
#if TEMP_SENSOR_2 == 0
#error "TEMP_SENSOR_2 is required with 3 or more HOTENDS."
#elif !HAS_HEATER_2
#error "HEATER_2_PIN not defined for this board."
#elif !PIN_EXISTS(TEMP_2)
#error "TEMP_2_PIN not defined for this board."
#endif
#if HOTENDS > 3
#if TEMP_SENSOR_3 == 0
Configuration changes to support 5 extruders
2017-04-06 23:45:29 +02:00
#error "TEMP_SENSOR_3 is required with 4 or more HOTENDS."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#elif !HAS_HEATER_3
#error "HEATER_3_PIN not defined for this board."
#elif !PIN_EXISTS(TEMP_3)
#error "TEMP_3_PIN not defined for this board."
#endif
Configuration changes to support 5 extruders
2017-04-06 23:45:29 +02:00
#if HOTENDS > 4
#if TEMP_SENSOR_4 == 0
Update, correct sanity-checks for up to 6 extruders (#12333)
2018-11-05 01:36:45 +01:00
#error "TEMP_SENSOR_4 is required with 5 or more HOTENDS."
Configuration changes to support 5 extruders
2017-04-06 23:45:29 +02:00
#elif !HAS_HEATER_4
#error "HEATER_4_PIN not defined for this board."
#elif !PIN_EXISTS(TEMP_4)
#error "TEMP_4_PIN not defined for this board."
#endif
Code changes supporting up to 6 extruders
2018-09-13 08:35:55 +02:00
#if HOTENDS > 5
#if TEMP_SENSOR_5 == 0
Update, correct sanity-checks for up to 6 extruders (#12333)
2018-11-05 01:36:45 +01:00
#error "TEMP_SENSOR_5 is required with 6 HOTENDS."
Code changes supporting up to 6 extruders
2018-09-13 08:35:55 +02:00
#elif !HAS_HEATER_5
#error "HEATER_5_PIN not defined for this board."
#elif !PIN_EXISTS(TEMP_5)
#error "TEMP_5_PIN not defined for this board."
#endif
BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (#16595)
2020-01-25 09:13:39 +01:00
#if HOTENDS > 6
#if TEMP_SENSOR_6 == 0
#error "TEMP_SENSOR_6 is required with 6 HOTENDS."
#elif !HAS_HEATER_6
#error "HEATER_6_PIN not defined for this board."
#elif !PIN_EXISTS(TEMP_6)
#error "TEMP_6_PIN not defined for this board."
#endif
#if HOTENDS > 7
#if TEMP_SENSOR_7 == 0
#error "TEMP_SENSOR_7 is required with 7 HOTENDS."
#elif !HAS_HEATER_7
#error "HEATER_7_PIN not defined for this board."
#elif !PIN_EXISTS(TEMP_7)
#error "TEMP_7_PIN not defined for this board."
#endif
#elif TEMP_SENSOR_7 != 0
#error "TEMP_SENSOR_7 shouldn't be set with only 7 HOTENDS."
#endif
#elif TEMP_SENSOR_6 != 0
#error "TEMP_SENSOR_6 shouldn't be set with only 6 HOTENDS."
#elif TEMP_SENSOR_7 != 0
#error "TEMP_SENSOR_7 shouldn't be set with only 6 HOTENDS."
#endif
Code changes supporting up to 6 extruders
2018-09-13 08:35:55 +02:00
#elif TEMP_SENSOR_5 != 0
#error "TEMP_SENSOR_5 shouldn't be set with only 5 HOTENDS."
BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (#16595)
2020-01-25 09:13:39 +01:00
#elif TEMP_SENSOR_6 != 0
#error "TEMP_SENSOR_6 shouldn't be set with only 5 HOTENDS."
#elif TEMP_SENSOR_7 != 0
#error "TEMP_SENSOR_7 shouldn't be set with only 5 HOTENDS."
Code changes supporting up to 6 extruders
2018-09-13 08:35:55 +02:00
#endif
Configuration changes to support 5 extruders
2017-04-06 23:45:29 +02:00
#elif TEMP_SENSOR_4 != 0
[2.0.x] Addressing #7612 Change "extruder" to HOTEND in sanity error messages
2017-10-07 09:27:26 +02:00
#error "TEMP_SENSOR_4 shouldn't be set with only 4 HOTENDS."
Code changes supporting up to 6 extruders
2018-09-13 08:35:55 +02:00
#elif TEMP_SENSOR_5 != 0
Update, correct sanity-checks for up to 6 extruders (#12333)
2018-11-05 01:36:45 +01:00
#error "TEMP_SENSOR_5 shouldn't be set with only 4 HOTENDS."
BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (#16595)
2020-01-25 09:13:39 +01:00
#elif TEMP_SENSOR_6 != 0
#error "TEMP_SENSOR_6 shouldn't be set with only 4 HOTENDS."
#elif TEMP_SENSOR_7 != 0
#error "TEMP_SENSOR_7 shouldn't be set with only 4 HOTENDS."
Configuration changes to support 5 extruders
2017-04-06 23:45:29 +02:00
#endif
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#elif TEMP_SENSOR_3 != 0
[2.0.x] Addressing #7612 Change "extruder" to HOTEND in sanity error messages
2017-10-07 09:27:26 +02:00
#error "TEMP_SENSOR_3 shouldn't be set with only 3 HOTENDS."
Configuration changes to support 5 extruders
2017-04-06 23:45:29 +02:00
#elif TEMP_SENSOR_4 != 0
[2.0.x] Addressing #7612 Change "extruder" to HOTEND in sanity error messages
2017-10-07 09:27:26 +02:00
#error "TEMP_SENSOR_4 shouldn't be set with only 3 HOTENDS."
Code changes supporting up to 6 extruders
2018-09-13 08:35:55 +02:00
#elif TEMP_SENSOR_5 != 0
Update, correct sanity-checks for up to 6 extruders (#12333)
2018-11-05 01:36:45 +01:00
#error "TEMP_SENSOR_5 shouldn't be set with only 3 HOTENDS."
BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (#16595)
2020-01-25 09:13:39 +01:00
#elif TEMP_SENSOR_6 != 0
#error "TEMP_SENSOR_6 shouldn't be set with only 3 HOTENDS."
#elif TEMP_SENSOR_7 != 0
#error "TEMP_SENSOR_7 shouldn't be set with only 3 HOTENDS."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
#elif TEMP_SENSOR_2 != 0
[2.0.x] Addressing #7612 Change "extruder" to HOTEND in sanity error messages
2017-10-07 09:27:26 +02:00
#error "TEMP_SENSOR_2 shouldn't be set with only 2 HOTENDS."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#elif TEMP_SENSOR_3 != 0
[2.0.x] Addressing #7612 Change "extruder" to HOTEND in sanity error messages
2017-10-07 09:27:26 +02:00
#error "TEMP_SENSOR_3 shouldn't be set with only 2 HOTENDS."
Configuration changes to support 5 extruders
2017-04-06 23:45:29 +02:00
#elif TEMP_SENSOR_4 != 0
[2.0.x] Addressing #7612 Change "extruder" to HOTEND in sanity error messages
2017-10-07 09:27:26 +02:00
#error "TEMP_SENSOR_4 shouldn't be set with only 2 HOTENDS."
Code changes supporting up to 6 extruders
2018-09-13 08:35:55 +02:00
#elif TEMP_SENSOR_5 != 0
#error "TEMP_SENSOR_5 shouldn't be set with only 2 HOTENDS."
BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (#16595)
2020-01-25 09:13:39 +01:00
#elif TEMP_SENSOR_6 != 0
#error "TEMP_SENSOR_6 shouldn't be set with only 2 HOTENDS."
#elif TEMP_SENSOR_7 != 0
#error "TEMP_SENSOR_7 shouldn't be set with only 2 HOTENDS."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
#elif TEMP_SENSOR_1 != 0 && DISABLED(TEMP_SENSOR_1_AS_REDUNDANT)
[2.0.x] Addressing #7612 Change "extruder" to HOTEND in sanity error messages
2017-10-07 09:27:26 +02:00
#error "TEMP_SENSOR_1 shouldn't be set with only 1 HOTEND."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#elif TEMP_SENSOR_2 != 0
[2.0.x] Addressing #7612 Change "extruder" to HOTEND in sanity error messages
2017-10-07 09:27:26 +02:00
#error "TEMP_SENSOR_2 shouldn't be set with only 1 HOTEND."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#elif TEMP_SENSOR_3 != 0
[2.0.x] Addressing #7612 Change "extruder" to HOTEND in sanity error messages
2017-10-07 09:27:26 +02:00
#error "TEMP_SENSOR_3 shouldn't be set with only 1 HOTEND."
Configuration changes to support 5 extruders
2017-04-06 23:45:29 +02:00
#elif TEMP_SENSOR_4 != 0
[2.0.x] Addressing #7612 Change "extruder" to HOTEND in sanity error messages
2017-10-07 09:27:26 +02:00
#error "TEMP_SENSOR_4 shouldn't be set with only 1 HOTEND."
Code changes supporting up to 6 extruders
2018-09-13 08:35:55 +02:00
#elif TEMP_SENSOR_5 != 0
#error "TEMP_SENSOR_5 shouldn't be set with only 1 HOTEND."
BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (#16595)
2020-01-25 09:13:39 +01:00
#elif TEMP_SENSOR_6 != 0
#error "TEMP_SENSOR_6 shouldn't be set with only 1 HOTEND."
#elif TEMP_SENSOR_7 != 0
#error "TEMP_SENSOR_7 shouldn't be set with only 1 HOTEND."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
Sanity-check the chamber thermistor pin
2020-06-19 21:01:15 +02:00
#if TEMP_SENSOR_CHAMBER && !PIN_EXISTS(TEMP_CHAMBER)
#error "TEMP_SENSOR_CHAMBER requires TEMP_CHAMBER_PIN. Please add it to your configuration."
#endif
PINDA v2 temperature sensor / compensation (#16293)
2020-01-18 00:16:45 +01:00
#if TEMP_SENSOR_PROBE
#if !PIN_EXISTS(TEMP_PROBE)
Sanity-check the chamber thermistor pin
2020-06-19 21:01:15 +02:00
#error "TEMP_SENSOR_PROBE requires TEMP_PROBE_PIN. Please add it to your configuration."
PINDA v2 temperature sensor / compensation (#16293)
2020-01-18 00:16:45 +01:00
#elif !HAS_TEMP_ADC_PROBE
#error "TEMP_PROBE_PIN must be an ADC pin."
#elif !ENABLED(FIX_MOUNTED_PROBE)
#error "TEMP_SENSOR_PROBE shouldn't be set without FIX_MOUNTED_PROBE."
#endif
#endif
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) && TEMP_SENSOR_1 == 0
#error "TEMP_SENSOR_1 is required with TEMP_SENSOR_1_AS_REDUNDANT."
#endif
Per-Hotend Default PIDs (#18483)
2020-07-01 23:18:20 +02:00
/**
* Test Heater, Temp Sensor, and Extruder Pins
*/
#if !HAS_HEATER_0
#error "HEATER_0_PIN not defined for this board."
#elif !ANY_PIN(TEMP_0, MAX6675_SS)
#error "TEMP_0_PIN not defined for this board."
#elif ((defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && !PINS_EXIST(E0_STEP, E0_DIR))
#error "E0_STEP_PIN or E0_DIR_PIN not defined for this board."
#elif ( !(defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && (!PINS_EXIST(E0_STEP, E0_DIR) || !HAS_E0_ENABLE))
#error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board."
#elif EXTRUDERS && TEMP_SENSOR_0 == 0
#error "TEMP_SENSOR_0 is required if there are any extruders."
#endif
// Pins are required for heaters
#if ENABLED(HEATER_0_USES_MAX6675) && !PIN_EXISTS(MAX6675_SS)
#error "MAX6675_SS_PIN (required for TEMP_SENSOR_0) not defined for this board."
#elif HAS_HOTEND && !HAS_TEMP_HOTEND
#error "TEMP_0_PIN (required for TEMP_SENSOR_0) not defined for this board."
#elif EITHER(HAS_MULTI_HOTEND, HEATERS_PARALLEL) && !HAS_HEATER_1
#error "HEATER_1_PIN is not defined. TEMP_SENSOR_1 might not be set, or the board (not EEB / EEF?) doesn't define a pin."
#endif
Sanity check for status LED pins
2016-09-24 23:26:57 +02:00
/**
* Temperature status LEDs
*/
Extended condition macros (#13419) Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`
2019-03-17 05:43:06 +01:00
#if ENABLED(TEMP_STAT_LEDS) && !ANY_PIN(STAT_LED_RED, STAT_LED_BLUE)
Allow TEMP_STAT_LEDS with only one LED defined
2016-10-23 03:07:48 +02:00
#error "TEMP_STAT_LEDS requires STAT_LED_RED_PIN or STAT_LED_BLUE_PIN, preferably both."
Sanity check for status LED pins
2016-09-24 23:26:57 +02:00
#endif
Add sanity check for LED_CONTROL_MENU Addressing #10569
2018-04-30 01:34:57 +02:00
/**
* LED Control Menu
*/
#if ENABLED(LED_CONTROL_MENU) && !HAS_COLOR_LEDS
Extended condition macros (#13419) Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`
2019-03-17 05:43:06 +01:00
#error "LED_CONTROL_MENU requires BLINKM, RGB_LED, RGBW_LED, PCA9533, PCA9632, or NEOPIXEL_LED."
Add sanity check for LED_CONTROL_MENU Addressing #10569
2018-04-30 01:34:57 +02:00
#endif
Fysetc LCD backlight timeout (#14265)
2019-06-13 04:59:39 +02:00
/**
* LED Backlight Timeout
*/
Fix PSU_POWERUP_DELAY compile error (#16064)
2019-12-01 19:55:28 +01:00
#if defined(LED_BACKLIGHT_TIMEOUT) && !(ENABLED(PSU_CONTROL) && EITHER(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1))
Fysetc rename Part 2
2019-07-18 11:36:08 +02:00
#error "LED_BACKLIGHT_TIMEOUT requires a FYSETC Mini Panel and a Power Switch."
Fysetc LCD backlight timeout (#14265)
2019-06-13 04:59:39 +02:00
#endif
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
/**
Single X Duplication Extension (#13373) * Multi-nozzle selective duplication * Use a bit-mask, reduce stepper_indirection.h size * Tweak the multi-nozzle duplication description * Use 'S' as a bool in M605 * Add HAS_DUPLICATION_MODE conditional * Remove '_MODE' from the option name * M605 in the style of Stacker M280 * Also include direct mask style (P)
2019-03-13 06:42:50 +01:00
* Basic multi hotend duplication mode
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
*/
Single X Duplication Extension (#13373) * Multi-nozzle selective duplication * Use a bit-mask, reduce stepper_indirection.h size * Tweak the multi-nozzle duplication description * Use 'S' as a bool in M605 * Add HAS_DUPLICATION_MODE conditional * Remove '_MODE' from the option name * M605 in the style of Stacker M280 * Also include direct mask style (P)
2019-03-13 06:42:50 +01:00
#if ENABLED(MULTI_NOZZLE_DUPLICATION)
#if HOTENDS < 2
#error "MULTI_NOZZLE_DUPLICATION requires 2 or more hotends."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#elif ENABLED(DUAL_X_CARRIAGE)
Single X Duplication Extension (#13373) * Multi-nozzle selective duplication * Use a bit-mask, reduce stepper_indirection.h size * Tweak the multi-nozzle duplication description * Use 'S' as a bool in M605 * Add HAS_DUPLICATION_MODE conditional * Remove '_MODE' from the option name * M605 in the style of Stacker M280 * Also include direct mask style (P)
2019-03-13 06:42:50 +01:00
#error "MULTI_NOZZLE_DUPLICATION is incompatible with DUAL_X_CARRIAGE."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#elif ENABLED(SINGLENOZZLE)
Single X Duplication Extension (#13373) * Multi-nozzle selective duplication * Use a bit-mask, reduce stepper_indirection.h size * Tweak the multi-nozzle duplication description * Use 'S' as a bool in M605 * Add HAS_DUPLICATION_MODE conditional * Remove '_MODE' from the option name * M605 in the style of Stacker M280 * Also include direct mask style (P)
2019-03-13 06:42:50 +01:00
#error "MULTI_NOZZLE_DUPLICATION is incompatible with SINGLENOZZLE."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#elif ENABLED(MIXING_EXTRUDER)
Single X Duplication Extension (#13373) * Multi-nozzle selective duplication * Use a bit-mask, reduce stepper_indirection.h size * Tweak the multi-nozzle duplication description * Use 'S' as a bool in M605 * Add HAS_DUPLICATION_MODE conditional * Remove '_MODE' from the option name * M605 in the style of Stacker M280 * Also include direct mask style (P)
2019-03-13 06:42:50 +01:00
#error "MULTI_NOZZLE_DUPLICATION is incompatible with MIXING_EXTRUDER."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#elif ENABLED(SWITCHING_EXTRUDER)
Single X Duplication Extension (#13373) * Multi-nozzle selective duplication * Use a bit-mask, reduce stepper_indirection.h size * Tweak the multi-nozzle duplication description * Use 'S' as a bool in M605 * Add HAS_DUPLICATION_MODE conditional * Remove '_MODE' from the option name * M605 in the style of Stacker M280 * Also include direct mask style (P)
2019-03-13 06:42:50 +01:00
#error "MULTI_NOZZLE_DUPLICATION is incompatible with SWITCHING_EXTRUDER."
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
#endif
/**
Support for two switching extruders
2017-06-19 23:54:37 +02:00
* Test Extruder Stepper Pins
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
*/
MK2_MULTIPLEXER does not require E2/E3 stepper pins
2017-11-24 23:56:39 +01:00
#if DISABLED(MK2_MULTIPLEXER) // MK2_MULTIPLEXER uses E0 stepper only
Code changes supporting up to 6 extruders
2018-09-13 08:35:55 +02:00
#if E_STEPPERS
STM32duino - Use SDIO for onboard SD (#16756)
2020-02-04 08:24:11 +01:00
#if !(PINS_EXIST(E0_STEP, E0_DIR) && HAS_E0_ENABLE)
Code changes supporting up to 6 extruders
2018-09-13 08:35:55 +02:00
#error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board."
MK2_MULTIPLEXER does not require E2/E3 stepper pins
2017-11-24 23:56:39 +01:00
#endif
Code changes supporting up to 6 extruders
2018-09-13 08:35:55 +02:00
#if E_STEPPERS > 1
STM32duino - Use SDIO for onboard SD (#16756)
2020-02-04 08:24:11 +01:00
#if !(PINS_EXIST(E1_STEP, E1_DIR) && HAS_E1_ENABLE)
Code changes supporting up to 6 extruders
2018-09-13 08:35:55 +02:00
#error "E1_STEP_PIN, E1_DIR_PIN, or E1_ENABLE_PIN not defined for this board."
#endif
#if E_STEPPERS > 2
STM32duino - Use SDIO for onboard SD (#16756)
2020-02-04 08:24:11 +01:00
#if !(PINS_EXIST(E2_STEP, E2_DIR) && HAS_E2_ENABLE)
Code changes supporting up to 6 extruders
2018-09-13 08:35:55 +02:00
#error "E2_STEP_PIN, E2_DIR_PIN, or E2_ENABLE_PIN not defined for this board."
#endif
#if E_STEPPERS > 3
STM32duino - Use SDIO for onboard SD (#16756)
2020-02-04 08:24:11 +01:00
#if !(PINS_EXIST(E3_STEP, E3_DIR) && HAS_E3_ENABLE)
Code changes supporting up to 6 extruders
2018-09-13 08:35:55 +02:00
#error "E3_STEP_PIN, E3_DIR_PIN, or E3_ENABLE_PIN not defined for this board."
#endif
#if E_STEPPERS > 4
STM32duino - Use SDIO for onboard SD (#16756)
2020-02-04 08:24:11 +01:00
#if !(PINS_EXIST(E4_STEP, E4_DIR) && HAS_E4_ENABLE)
Code changes supporting up to 6 extruders
2018-09-13 08:35:55 +02:00
#error "E4_STEP_PIN, E4_DIR_PIN, or E4_ENABLE_PIN not defined for this board."
#endif
#if E_STEPPERS > 5
STM32duino - Use SDIO for onboard SD (#16756)
2020-02-04 08:24:11 +01:00
#if !(PINS_EXIST(E5_STEP, E5_DIR) && HAS_E5_ENABLE)
Code changes supporting up to 6 extruders
2018-09-13 08:35:55 +02:00
#error "E5_STEP_PIN, E5_DIR_PIN, or E5_ENABLE_PIN not defined for this board."
#endif
BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (#16595)
2020-01-25 09:13:39 +01:00
#if E_STEPPERS > 6
STM32duino - Use SDIO for onboard SD (#16756)
2020-02-04 08:24:11 +01:00
#if !(PINS_EXIST(E6_STEP, E6_DIR) && HAS_E6_ENABLE)
BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (#16595)
2020-01-25 09:13:39 +01:00
#error "E6_STEP_PIN, E6_DIR_PIN, or E6_ENABLE_PIN not defined for this board."
#endif
#if E_STEPPERS > 7
STM32duino - Use SDIO for onboard SD (#16756)
2020-02-04 08:24:11 +01:00
#if !(PINS_EXIST(E7_STEP, E7_DIR) && HAS_E7_ENABLE)
BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (#16595)
2020-01-25 09:13:39 +01:00
#error "E7_STEP_PIN, E7_DIR_PIN, or E7_ENABLE_PIN not defined for this board."
#endif
#endif // E_STEPPERS > 7
#endif // E_STEPPERS > 6
Code changes supporting up to 6 extruders
2018-09-13 08:35:55 +02:00
#endif // E_STEPPERS > 5
#endif // E_STEPPERS > 4
#endif // E_STEPPERS > 3
#endif // E_STEPPERS > 2
#endif // E_STEPPERS > 1
#endif // E_STEPPERS
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#endif
Add support for Triple-Z steppers/endstops
2018-06-19 18:55:49 +02:00
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
/**
Implement support for Dual X and Y endstops
2017-10-29 09:43:44 +01:00
* Endstop Tests
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
*/
Implement support for Dual X and Y endstops
2017-10-29 09:43:44 +01:00
Add USE_PROBE_FOR_Z_HOMING option (#17359)
2020-04-17 16:02:21 +02:00
#define _PLUG_UNUSED_TEST(A,P) (DISABLED(USE_##P##MIN_PLUG, USE_##P##MAX_PLUG) \
&& !(ENABLED(A##_DUAL_ENDSTOPS) && WITHIN(A##2_USE_ENDSTOP, _##P##MAX_, _##P##MIN_)) \
&& !(ENABLED(A##_MULTI_ENDSTOPS) && WITHIN(A##2_USE_ENDSTOP, _##P##MAX_, _##P##MIN_)) )
#define _AXIS_PLUG_UNUSED_TEST(A) (_PLUG_UNUSED_TEST(A,X) && _PLUG_UNUSED_TEST(A,Y) && _PLUG_UNUSED_TEST(A,Z))
Implement support for Dual X and Y endstops
2017-10-29 09:43:44 +01:00
// At least 3 endstop plugs must be used
#if _AXIS_PLUG_UNUSED_TEST(X)
#error "You must enable USE_XMIN_PLUG or USE_XMAX_PLUG."
#endif
#if _AXIS_PLUG_UNUSED_TEST(Y)
#error "You must enable USE_YMIN_PLUG or USE_YMAX_PLUG."
#endif
#if _AXIS_PLUG_UNUSED_TEST(Z)
#error "You must enable USE_ZMIN_PLUG or USE_ZMAX_PLUG."
#endif
// Delta and Cartesian use 3 homing endstops
#if !IS_SCARA
Sanitycheck endstop plugs based on homing direction
2016-09-05 22:08:26 +02:00
#if X_HOME_DIR < 0 && DISABLED(USE_XMIN_PLUG)
#error "Enable USE_XMIN_PLUG when homing X to MIN."
#elif X_HOME_DIR > 0 && DISABLED(USE_XMAX_PLUG)
#error "Enable USE_XMAX_PLUG when homing X to MAX."
#elif Y_HOME_DIR < 0 && DISABLED(USE_YMIN_PLUG)
#error "Enable USE_YMIN_PLUG when homing Y to MIN."
#elif Y_HOME_DIR > 0 && DISABLED(USE_YMAX_PLUG)
#error "Enable USE_YMAX_PLUG when homing Y to MAX."
Implement support for Dual X and Y endstops
2017-10-29 09:43:44 +01:00
#endif
#endif
Add USE_PROBE_FOR_Z_HOMING option (#17359)
2020-04-17 16:02:21 +02:00
// Z homing direction and plug usage flags
#if Z_HOME_DIR < 0 && NONE(USE_ZMIN_PLUG, HOMING_Z_WITH_PROBE)
Implement support for Dual X and Y endstops
2017-10-29 09:43:44 +01:00
#error "Enable USE_ZMIN_PLUG when homing Z to MIN."
Add USE_PROBE_FOR_Z_HOMING option (#17359)
2020-04-17 16:02:21 +02:00
#elif Z_HOME_DIR > 0 && ENABLED(USE_PROBE_FOR_Z_HOMING)
#error "Z_HOME_DIR must be -1 when homing Z with the probe."
Implement support for Dual X and Y endstops
2017-10-29 09:43:44 +01:00
#elif Z_HOME_DIR > 0 && DISABLED(USE_ZMAX_PLUG)
#error "Enable USE_ZMAX_PLUG when homing Z to MAX."
#endif
Quad Z stepper support (#16277)
2020-01-20 06:35:07 +01:00
// Dual/multiple endstops requirements
Implement support for Dual X and Y endstops
2017-10-29 09:43:44 +01:00
#if ENABLED(X_DUAL_ENDSTOPS)
#if !X2_USE_ENDSTOP
#error "You must set X2_USE_ENDSTOP with X_DUAL_ENDSTOPS."
Fix sanity checks for dual axes (#10633)
2018-05-07 10:34:26 +02:00
#elif X2_USE_ENDSTOP == _XMIN_ && DISABLED(USE_XMIN_PLUG)
#error "USE_XMIN_PLUG is required when X2_USE_ENDSTOP is _XMIN_."
#elif X2_USE_ENDSTOP == _XMAX_ && DISABLED(USE_XMAX_PLUG)
#error "USE_XMAX_PLUG is required when X2_USE_ENDSTOP is _XMAX_."
#elif X2_USE_ENDSTOP == _YMIN_ && DISABLED(USE_YMIN_PLUG)
#error "USE_YMIN_PLUG is required when X2_USE_ENDSTOP is _YMIN_."
#elif X2_USE_ENDSTOP == _YMAX_ && DISABLED(USE_YMAX_PLUG)
#error "USE_YMAX_PLUG is required when X2_USE_ENDSTOP is _YMAX_."
#elif X2_USE_ENDSTOP == _ZMIN_ && DISABLED(USE_ZMIN_PLUG)
#error "USE_ZMIN_PLUG is required when X2_USE_ENDSTOP is _ZMIN_."
#elif X2_USE_ENDSTOP == _ZMAX_ && DISABLED(USE_ZMAX_PLUG)
#error "USE_ZMAX_PLUG is required when X2_USE_ENDSTOP is _ZMAX_."
Implement support for Dual X and Y endstops
2017-10-29 09:43:44 +01:00
#elif !HAS_X2_MIN && !HAS_X2_MAX
#error "X2_USE_ENDSTOP has been assigned to a nonexistent endstop!"
#elif ENABLED(DELTA)
#error "X_DUAL_ENDSTOPS is not compatible with DELTA."
#endif
#endif
#if ENABLED(Y_DUAL_ENDSTOPS)
#if !Y2_USE_ENDSTOP
#error "You must set Y2_USE_ENDSTOP with Y_DUAL_ENDSTOPS."
Fix sanity checks for dual axes (#10633)
2018-05-07 10:34:26 +02:00
#elif Y2_USE_ENDSTOP == _XMIN_ && DISABLED(USE_XMIN_PLUG)
#error "USE_XMIN_PLUG is required when Y2_USE_ENDSTOP is _XMIN_."
#elif Y2_USE_ENDSTOP == _XMAX_ && DISABLED(USE_XMAX_PLUG)
#error "USE_XMAX_PLUG is required when Y2_USE_ENDSTOP is _XMAX_."
#elif Y2_USE_ENDSTOP == _YMIN_ && DISABLED(USE_YMIN_PLUG)
#error "USE_YMIN_PLUG is required when Y2_USE_ENDSTOP is _YMIN_."
#elif Y2_USE_ENDSTOP == _YMAX_ && DISABLED(USE_YMAX_PLUG)
#error "USE_YMAX_PLUG is required when Y2_USE_ENDSTOP is _YMAX_."
#elif Y2_USE_ENDSTOP == _ZMIN_ && DISABLED(USE_ZMIN_PLUG)
#error "USE_ZMIN_PLUG is required when Y2_USE_ENDSTOP is _ZMIN_."
#elif Y2_USE_ENDSTOP == _ZMAX_ && DISABLED(USE_ZMAX_PLUG)
#error "USE_ZMAX_PLUG is required when Y2_USE_ENDSTOP is _ZMAX_."
Implement support for Dual X and Y endstops
2017-10-29 09:43:44 +01:00
#elif !HAS_Y2_MIN && !HAS_Y2_MAX
#error "Y2_USE_ENDSTOP has been assigned to a nonexistent endstop!"
#elif ENABLED(DELTA)
#error "Y_DUAL_ENDSTOPS is not compatible with DELTA."
#endif
#endif
Quad Z stepper support (#16277)
2020-01-20 06:35:07 +01:00
#if ENABLED(Z_MULTI_ENDSTOPS)
Implement support for Dual X and Y endstops
2017-10-29 09:43:44 +01:00
#if !Z2_USE_ENDSTOP
Quad Z stepper support (#16277)
2020-01-20 06:35:07 +01:00
#error "You must set Z2_USE_ENDSTOP with Z_MULTI_ENDSTOPS when NUM_Z_STEPPER_DRIVERS >= 2."
Fix sanity checks for dual axes (#10633)
2018-05-07 10:34:26 +02:00
#elif Z2_USE_ENDSTOP == _XMIN_ && DISABLED(USE_XMIN_PLUG)
#error "USE_XMIN_PLUG is required when Z2_USE_ENDSTOP is _XMIN_."
#elif Z2_USE_ENDSTOP == _XMAX_ && DISABLED(USE_XMAX_PLUG)
#error "USE_XMAX_PLUG is required when Z2_USE_ENDSTOP is _XMAX_."
#elif Z2_USE_ENDSTOP == _YMIN_ && DISABLED(USE_YMIN_PLUG)
#error "USE_YMIN_PLUG is required when Z2_USE_ENDSTOP is _YMIN_."
#elif Z2_USE_ENDSTOP == _YMAX_ && DISABLED(USE_YMAX_PLUG)
#error "USE_YMAX_PLUG is required when Z2_USE_ENDSTOP is _YMAX_."
#elif Z2_USE_ENDSTOP == _ZMIN_ && DISABLED(USE_ZMIN_PLUG)
#error "USE_ZMIN_PLUG is required when Z2_USE_ENDSTOP is _ZMIN_."
#elif Z2_USE_ENDSTOP == _ZMAX_ && DISABLED(USE_ZMAX_PLUG)
#error "USE_ZMAX_PLUG is required when Z2_USE_ENDSTOP is _ZMAX_."
Implement support for Dual X and Y endstops
2017-10-29 09:43:44 +01:00
#elif !HAS_Z2_MIN && !HAS_Z2_MAX
#error "Z2_USE_ENDSTOP has been assigned to a nonexistent endstop!"
#elif ENABLED(DELTA)
Quad Z stepper support (#16277)
2020-01-20 06:35:07 +01:00
#error "Z_MULTI_ENDSTOPS is not compatible with DELTA."
#endif
#if NUM_Z_STEPPER_DRIVERS >= 3
#if !Z3_USE_ENDSTOP
#error "You must set Z3_USE_ENDSTOP with Z_MULTI_ENDSTOPS when NUM_Z_STEPPER_DRIVERS >= 3."
#elif Z3_USE_ENDSTOP == _XMIN_ && DISABLED(USE_XMIN_PLUG)
#error "USE_XMIN_PLUG is required when Z3_USE_ENDSTOP is _XMIN_."
#elif Z3_USE_ENDSTOP == _XMAX_ && DISABLED(USE_XMAX_PLUG)
#error "USE_XMAX_PLUG is required when Z3_USE_ENDSTOP is _XMAX_."
#elif Z3_USE_ENDSTOP == _YMIN_ && DISABLED(USE_YMIN_PLUG)
#error "USE_YMIN_PLUG is required when Z3_USE_ENDSTOP is _YMIN_."
#elif Z3_USE_ENDSTOP == _YMAX_ && DISABLED(USE_YMAX_PLUG)
#error "USE_YMAX_PLUG is required when Z3_USE_ENDSTOP is _YMAX_."
#elif Z3_USE_ENDSTOP == _ZMIN_ && DISABLED(USE_ZMIN_PLUG)
#error "USE_ZMIN_PLUG is required when Z3_USE_ENDSTOP is _ZMIN_."
#elif Z3_USE_ENDSTOP == _ZMAX_ && DISABLED(USE_ZMAX_PLUG)
#error "USE_ZMAX_PLUG is required when Z3_USE_ENDSTOP is _ZMAX_."
#elif !HAS_Z3_MIN && !HAS_Z3_MAX
#error "Z3_USE_ENDSTOP has been assigned to a nonexistent endstop!"
#endif
Sanitycheck endstop plugs based on homing direction
2016-09-05 22:08:26 +02:00
#endif
Quad Z stepper support (#16277)
2020-01-20 06:35:07 +01:00
#if NUM_Z_STEPPER_DRIVERS >= 4
#if !Z4_USE_ENDSTOP
#error "You must set Z4_USE_ENDSTOP with Z_MULTI_ENDSTOPS when NUM_Z_STEPPER_DRIVERS >= 4."
#elif Z4_USE_ENDSTOP == _XMIN_ && DISABLED(USE_XMIN_PLUG)
#error "USE_XMIN_PLUG is required when Z4_USE_ENDSTOP is _XMIN_."
#elif Z4_USE_ENDSTOP == _XMAX_ && DISABLED(USE_XMAX_PLUG)
#error "USE_XMAX_PLUG is required when Z4_USE_ENDSTOP is _XMAX_."
#elif Z4_USE_ENDSTOP == _YMIN_ && DISABLED(USE_YMIN_PLUG)
#error "USE_YMIN_PLUG is required when Z4_USE_ENDSTOP is _YMIN_."
#elif Z4_USE_ENDSTOP == _YMAX_ && DISABLED(USE_YMAX_PLUG)
#error "USE_YMAX_PLUG is required when Z4_USE_ENDSTOP is _YMAX_."
#elif Z4_USE_ENDSTOP == _ZMIN_ && DISABLED(USE_ZMIN_PLUG)
#error "USE_ZMIN_PLUG is required when Z4_USE_ENDSTOP is _ZMIN_."
#elif Z4_USE_ENDSTOP == _ZMAX_ && DISABLED(USE_ZMAX_PLUG)
#error "USE_ZMAX_PLUG is required when Z4_USE_ENDSTOP is _ZMAX_."
#elif !HAS_Z4_MIN && !HAS_Z4_MAX
#error "Z4_USE_ENDSTOP has been assigned to a nonexistent endstop!"
#endif
Add support for Triple-Z steppers/endstops
2018-06-19 18:55:49 +02:00
#endif
#endif
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
Expose: Homing Validation and Endstop Noise Threshold (#11912)
2018-09-25 03:59:12 +02:00
#if defined(ENDSTOP_NOISE_THRESHOLD) && !WITHIN(ENDSTOP_NOISE_THRESHOLD, 2, 7)
#error "ENDSTOP_NOISE_THRESHOLD must be an integer from 2 to 7."
#endif
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
/**
* emergency-command parser
*/
restore PR 9661 files & V1 fix
2018-03-11 05:46:32 +01:00
#if ENABLED(EMERGENCY_PARSER) && defined(__AVR__) && defined(USBCON)
Revert to SanityCheck on every .cpp file
2016-07-29 02:08:28 +02:00
#error "EMERGENCY_PARSER does not work on boards with AT90USB processors (USBCON)."
#endif
Additional details for I2C_SLAVE_ADDRESS
2016-08-12 09:51:25 +02:00
/**
* I2C bus
*/
#if ENABLED(EXPERIMENTAL_I2CBUS) && I2C_SLAVE_ADDRESS > 0
#if I2C_SLAVE_ADDRESS < 8
#error "I2C_SLAVE_ADDRESS can't be less than 8. (Addresses 0 - 7 are reserved.)"
#elif I2C_SLAVE_ADDRESS > 127
#error "I2C_SLAVE_ADDRESS can't be over 127. (Only 7 bits allowed.)"
#endif
#endif
Sanity check for more than 1 controller
2016-09-12 06:33:09 +02:00
Patched up, cleaned up
2016-09-26 08:30:34 +02:00
/**
* G38 Probe Target
*/
Rename feature to G38_PROBE_TARGET
2016-09-29 22:06:01 +02:00
#if ENABLED(G38_PROBE_TARGET)
Patched up, cleaned up
2016-09-26 08:30:34 +02:00
#if !HAS_BED_PROBE
Rename feature to G38_PROBE_TARGET
2016-09-29 22:06:01 +02:00
#error "G38_PROBE_TARGET requires a bed probe."
Patched up, cleaned up
2016-09-26 08:30:34 +02:00
#elif !IS_CARTESIAN
Rename feature to G38_PROBE_TARGET
2016-09-29 22:06:01 +02:00
#error "G38_PROBE_TARGET requires a Cartesian machine."
Patched up, cleaned up
2016-09-26 08:30:34 +02:00
#endif
#endif
Support for an RGB LED using 3 pins
2016-11-30 02:51:13 +01:00
/**
* RGB_LED Requirements
*/
STM32duino - Use SDIO for onboard SD (#16756)
2020-02-04 08:24:11 +01:00
#define _RGB_TEST (PINS_EXIST(RGB_LED_R, RGB_LED_G, RGB_LED_B))
Refactor PRINTER_EVENT_LEDS, apply to M303 (#12038) Co-Authored-By: Giuliano Zaro <gmagician@users.noreply.github.com>
2018-10-11 04:25:43 +02:00
#if ENABLED(PRINTER_EVENT_LEDS) && !HAS_COLOR_LEDS
Extended condition macros (#13419) Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`
2019-03-17 05:43:06 +01:00
#error "PRINTER_EVENT_LEDS requires BLINKM, PCA9533, PCA9632, RGB_LED, RGBW_LED or NEOPIXEL_LED."
Refactor PRINTER_EVENT_LEDS, apply to M303 (#12038) Co-Authored-By: Giuliano Zaro <gmagician@users.noreply.github.com>
2018-10-11 04:25:43 +02:00
#elif ENABLED(RGB_LED)
Add support for an RGBW LED
2017-04-11 19:58:55 +02:00
#if !_RGB_TEST
Support for an RGB LED using 3 pins
2016-11-30 02:51:13 +01:00
#error "RGB_LED requires RGB_LED_R_PIN, RGB_LED_G_PIN, and RGB_LED_B_PIN."
Add support for an RGBW LED
2017-04-11 19:58:55 +02:00
#elif ENABLED(RGBW_LED)
#error "Please enable only one of RGB_LED and RGBW_LED."
Support for an RGB LED using 3 pins
2016-11-30 02:51:13 +01:00
#endif
Add support for an RGBW LED
2017-04-11 19:58:55 +02:00
#elif ENABLED(RGBW_LED)
#if !(_RGB_TEST && PIN_EXISTS(RGB_LED_W))
#error "RGBW_LED requires RGB_LED_R_PIN, RGB_LED_G_PIN, RGB_LED_B_PIN, and RGB_LED_W_PIN."
#endif
Different NEOPIXEL types Same as #7728 but for 2.0.x, Lot of cleanup and remove references in whole code to other "LED files" than leds.h. Now will be much easier to add next drivers/libraries. e.g. FastLED. But bad news, currently FastLED is suporting only RGB devices (no RGBW)
2017-10-05 13:45:36 +02:00
#elif ENABLED(NEOPIXEL_LED)
Add support for Printrbot Neopixel RGBW strip. Connected as described at http://printrbot.com/shop/led-strip/ Based on patch by Kelly Anderson <kelly@xilka.com> at http://www.xilka.com/printrbot/marlin/1.1.4/20170707/
2017-07-13 17:01:21 +02:00
#if !(PIN_EXISTS(NEOPIXEL) && NEOPIXEL_PIXELS > 0)
Different NEOPIXEL types Same as #7728 but for 2.0.x, Lot of cleanup and remove references in whole code to other "LED files" than leds.h. Now will be much easier to add next drivers/libraries. e.g. FastLED. But bad news, currently FastLED is suporting only RGB devices (no RGBW)
2017-10-05 13:45:36 +02:00
#error "NEOPIXEL_LED requires NEOPIXEL_PIN and NEOPIXEL_PIXELS."
Add support for Printrbot Neopixel RGBW strip. Connected as described at http://printrbot.com/shop/led-strip/ Based on patch by Kelly Anderson <kelly@xilka.com> at http://www.xilka.com/printrbot/marlin/1.1.4/20170707/
2017-07-13 17:01:21 +02:00
#endif
Support for an RGB LED using 3 pins
2016-11-30 02:51:13 +01:00
#endif
Undefine sanity check tests when done
2019-06-08 13:28:49 +02:00
#undef _RGB_TEST
Support for an RGB LED using 3 pins
2016-11-30 02:51:13 +01:00
Sanity check that auto fan pins can do PWM
2016-10-23 01:26:34 +02:00
/**
* Auto Fan check for PWM pins
*/
Skip impossible PWM sanity-checks
2020-03-22 06:19:05 +01:00
#if HAS_AUTO_FAN && EXTRUDER_AUTO_FAN_SPEED != 255 && DISABLED(NO_COMPILE_TIME_PWM)
Sanity check that auto fan pins can do PWM
2016-10-23 01:26:34 +02:00
#define AF_ERR_SUFF "_AUTO_FAN_PIN is not a PWM pin. Set EXTRUDER_AUTO_FAN_SPEED to 255."
#if HAS_AUTO_FAN_0
Fixes and improvements for PWM pins (#13383)
2019-03-13 12:51:15 +01:00
static_assert(PWM_PIN(E0_AUTO_FAN_PIN), "E0" AF_ERR_SUFF);
Sanity check that auto fan pins can do PWM
2016-10-23 01:26:34 +02:00
#elif HAS_AUTO_FAN_1
Fixes and improvements for PWM pins (#13383)
2019-03-13 12:51:15 +01:00
static_assert(PWM_PIN(E1_AUTO_FAN_PIN), "E1" AF_ERR_SUFF);
Sanity check that auto fan pins can do PWM
2016-10-23 01:26:34 +02:00
#elif HAS_AUTO_FAN_2
Fixes and improvements for PWM pins (#13383)
2019-03-13 12:51:15 +01:00
static_assert(PWM_PIN(E2_AUTO_FAN_PIN), "E2" AF_ERR_SUFF);
Sanity check that auto fan pins can do PWM
2016-10-23 01:26:34 +02:00
#elif HAS_AUTO_FAN_3
Fixes and improvements for PWM pins (#13383)
2019-03-13 12:51:15 +01:00
static_assert(PWM_PIN(E3_AUTO_FAN_PIN), "E3" AF_ERR_SUFF);
LPC1768 EEPROM fallback to flash, add overrides (#17184)
2020-03-16 21:59:05 +01:00
#elif HAS_AUTO_FAN_4
static_assert(PWM_PIN(E4_AUTO_FAN_PIN), "E4" AF_ERR_SUFF);
#elif HAS_AUTO_FAN_5
static_assert(PWM_PIN(E5_AUTO_FAN_PIN), "E5" AF_ERR_SUFF);
#elif HAS_AUTO_FAN_6
static_assert(PWM_PIN(E6_AUTO_FAN_PIN), "E6" AF_ERR_SUFF);
#elif HAS_AUTO_FAN_7
static_assert(PWM_PIN(E7_AUTO_FAN_PIN), "E7" AF_ERR_SUFF);
Sanity check that auto fan pins can do PWM
2016-10-23 01:26:34 +02:00
#endif
#endif
LPC1768 EEPROM fallback to flash, add overrides (#17184)
2020-03-16 21:59:05 +01:00
/**
* Make sure only one EEPROM type is enabled
*/
Refine EEPROM types / flags (#17772)
2020-04-29 21:46:33 +02:00
#if ENABLED(EEPROM_SETTINGS)
#if 1 < 0 \
+ ENABLED(I2C_EEPROM) + ENABLED(SPI_EEPROM) + ENABLED(QSPI_EEPROM) \
+ ENABLED(SDCARD_EEPROM_EMULATION) + ENABLED(FLASH_EEPROM_EMULATION) + ENABLED(SRAM_EEPROM_EMULATION)
#error "Please select only one method of EEPROM Persistent Storage."
#endif
LPC1768 EEPROM fallback to flash, add overrides (#17184)
2020-03-16 21:59:05 +01:00
#endif
SDCARD_READONLY (#17884)
2020-05-31 06:59:29 +02:00
/**
* Make sure features that need to write to the SD card are
* disabled unless write support is enabled.
*/
#if ENABLED(SDCARD_READONLY)
#if ENABLED(POWER_LOSS_RECOVERY)
#error "POWER_LOSS_RECOVERY is incompatible with SDCARD_READONLY."
#elif ENABLED(BINARY_FILE_TRANSFER)
#error "BINARY_FILE_TRANSFER is incompatible with SDCARD_READONLY."
#elif ENABLED(SDCARD_EEPROM_EMULATION)
#error "SDCARD_EEPROM_EMULATION is incompatible with SDCARD_READONLY."
#endif
#endif
Sanity check for more than 1 controller
2016-09-12 06:33:09 +02:00
/**
* Make sure only one display is enabled
*/
Reduce size of "only one" sanity checks
2018-03-16 08:26:03 +01:00
#if 1 < 0 \
Simplify, update LCD sanity-check
2019-07-14 16:19:29 +02:00
+ (ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && DISABLED(IS_RRD_SC)) \
+ (ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && DISABLED(IS_RRD_FG_SC)) \
+ (ENABLED(ULTRA_LCD) && DISABLED(IS_ULTRA_LCD)) \
+ (ENABLED(U8GLIB_SSD1306) && DISABLED(IS_U8GLIB_SSD1306)) \
Fix Ender-2 display pins, add BTN_ENC (#16349)
2020-01-04 03:44:16 +01:00
+ (ENABLED(MINIPANEL) && DISABLED(MKS_MINI_12864, ENDER2_STOCKDISPLAY)) \
Add MKS LCD12864 A/B Controller Support (#18120)
2020-06-16 09:43:09 +02:00
+ (ENABLED(MKS_MINI_12864) && DISABLED(MKS_LCD12864)) \
Fix LCD sanity check (#14678)
2019-07-19 12:53:36 +02:00
+ (ENABLED(EXTENSIBLE_UI) && DISABLED(IS_EXTUI)) \
Simplify, update LCD sanity-check
2019-07-14 16:19:29 +02:00
+ (ENABLED(ULTIPANEL) && DISABLED(IS_ULTIPANEL)) \
+ ENABLED(RADDS_DISPLAY) \
+ ENABLED(ULTIMAKERCONTROLLER) \
Reduce size of "only one" sanity checks
2018-03-16 08:26:03 +01:00
+ ENABLED(PANEL_ONE) \
+ ENABLED(G3D_PANEL) \
+ ENABLED(RIGIDBOT_PANEL) \
Simplify, update LCD sanity-check
2019-07-14 16:19:29 +02:00
+ ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602) \
+ ENABLED(ZONESTAR_LCD) \
Reduce size of "only one" sanity checks
2018-03-16 08:26:03 +01:00
+ ENABLED(RA_CONTROL_PANEL) \
+ ENABLED(LCD_SAINSMART_I2C_1602) \
+ ENABLED(LCD_SAINSMART_I2C_2004) \
+ ENABLED(LCM1602) \
+ ENABLED(LCD_I2C_PANELOLU2) \
+ ENABLED(LCD_I2C_VIKI) \
+ ENABLED(SAV_3DLCD) \
Simplify, update LCD sanity-check
2019-07-14 16:19:29 +02:00
+ ENABLED(FF_INTERFACEBOARD) \
+ ENABLED(REPRAPWORLD_GRAPHICAL_LCD) \
+ ENABLED(VIKI2) \
+ ENABLED(miniVIKI) \
+ ENABLED(MAKRPANEL) \
+ ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) \
Reduce size of "only one" sanity checks
2018-03-16 08:26:03 +01:00
+ ENABLED(BQ_LCD_SMART_CONTROLLER) \
Simplify, update LCD sanity-check
2019-07-14 16:19:29 +02:00
+ ENABLED(CARTESIO_UI) \
+ ENABLED(LCD_FOR_MELZI) \
+ ENABLED(ULTI_CONTROLLER) \
Add MKS LCD12864 A/B Controller Support (#18120)
2020-06-16 09:43:09 +02:00
+ ENABLED(MKS_LCD12864) \
Fix Ender-2 display pins, add BTN_ENC (#16349)
2020-01-04 03:44:16 +01:00
+ ENABLED(ENDER2_STOCKDISPLAY) \
Simplify, update LCD sanity-check
2019-07-14 16:19:29 +02:00
+ ENABLED(FYSETC_MINI_12864_X_X) \
+ ENABLED(FYSETC_MINI_12864_1_2) \
+ ENABLED(FYSETC_MINI_12864_2_0) \
+ ENABLED(FYSETC_MINI_12864_2_1) \
Update FYSETC S6 pins (#16559)
2020-01-17 20:16:05 +01:00
+ ENABLED(FYSETC_GENERIC_12864_1_1) \
Simplify, update LCD sanity-check
2019-07-14 16:19:29 +02:00
+ ENABLED(CR10_STOCKDISPLAY) \
Creality Ender 3 v2 (#17719)
2020-06-16 08:45:27 +02:00
+ ENABLED(DWIN_CREALITY_LCD) \
Simplify, update LCD sanity-check
2019-07-14 16:19:29 +02:00
+ ENABLED(ANET_FULL_GRAPHICS_LCD) \
+ ENABLED(AZSMZ_12864) \
+ ENABLED(SILVER_GATE_GLCD_CONTROLLER) \
Reduce size of "only one" sanity checks
2018-03-16 08:26:03 +01:00
+ ENABLED(SAV_3DGLCD) \
+ ENABLED(OLED_PANEL_TINYBOY2) \
Simplify, update LCD sanity-check
2019-07-14 16:19:29 +02:00
+ ENABLED(MKS_12864OLED) \
+ ENABLED(MKS_12864OLED_SSD1306) \
+ ENABLED(U8GLIB_SH1106_EINSTART) \
Overlord i2c LCD with LEDs and buzzer (#14801)
2019-08-02 13:19:45 +02:00
+ ENABLED(OVERLORD_OLED) \
Update and fix DGUS (#16317)
2020-01-04 04:00:44 +01:00
+ ENABLED(DGUS_LCD_UI_ORIGIN) \
+ ENABLED(DGUS_LCD_UI_FYSETC) \
+ ENABLED(DGUS_LCD_UI_HIPRECY) \
Simplify, update LCD sanity-check
2019-07-14 16:19:29 +02:00
+ ENABLED(MALYAN_LCD) \
LULZBOT_TOUCH_UI => TOUCH_UI_FTDI_EVE
2019-11-23 23:53:44 +01:00
+ ENABLED(TOUCH_UI_FTDI_EVE) \
More general FSMC display option
2019-07-30 11:00:51 +02:00
+ ENABLED(FSMC_GRAPHICAL_TFT)
Reduce size of "only one" sanity checks
2018-03-16 08:26:03 +01:00
#error "Please select no more than one LCD controller option."
#endif
Sanity check per-axis settings for size
2017-04-13 13:25:43 +02:00
Simplify, update LCD sanity-check
2019-07-14 16:19:29 +02:00
#undef IS_RRD_SC
#undef IS_RRD_FG_SC
#undef IS_ULTRA_LCD
#undef IS_U8GLIB_SSD1306
#undef IS_RRW_KEYPAD
#undef IS_EXTUI
#undef IS_ULTIPANEL
Apply TERN to compact code (#17619)
2020-04-22 23:35:03 +02:00
#if 1 < ENABLED(LCD_SCREEN_ROT_0) + ENABLED(LCD_SCREEN_ROT_90) + ENABLED(LCD_SCREEN_ROT_180) + ENABLED(LCD_SCREEN_ROT_270)
#error "Please enable only one LCD_SCREEN_ROT_* option: 0, 90, 180, or 270."
#endif
Finish, improve, clean up FYSETC_MINI_12864 revisions (#13871)
2019-05-02 03:05:29 +02:00
/**
* FYSETC Mini 12864 RGB backlighting required
*/
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) && DISABLED(RGB_LED)
#error "RGB_LED is required for FYSETC_MINI_12864 1.2 and 2.0."
#elif EITHER(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1) && DISABLED(LED_USER_PRESET_STARTUP)
#error "LED_USER_PRESET_STARTUP is required for FYSETC_MINI_12864 2.x displays."
#endif
Improve sanity checks with static_assert, organize
2017-06-06 14:19:27 +02:00
/**
Simplify stepper driver per-axis selection
2018-07-14 13:13:06 +02:00
* Check existing CS pins against enabled TMC SPI drivers.
Improve TMC config organization, naming
2018-03-13 08:06:40 +01:00
*/
Fix axis CS sanity check (#16271)
2019-12-21 05:05:42 +01:00
#define INVALID_TMC_SPI(ST) (AXIS_HAS_SPI(ST) && !PIN_EXISTS(ST##_CS))
Add TMC2209 support (#14249)
2019-06-20 22:47:50 +02:00
#if INVALID_TMC_SPI(X)
#error "An SPI driven TMC driver on X requires X_CS_PIN."
#elif INVALID_TMC_SPI(X2)
#error "An SPI driven TMC driver on X2 requires X2_CS_PIN."
#elif INVALID_TMC_SPI(Y)
#error "An SPI driven TMC driver on Y requires Y_CS_PIN."
#elif INVALID_TMC_SPI(Y2)
#error "An SPI driven TMC driver on Y2 requires Y2_CS_PIN."
#elif INVALID_TMC_SPI(Z)
#error "An SPI driven TMC driver on Z requires Z_CS_PIN."
#elif INVALID_TMC_SPI(Z2)
#error "An SPI driven TMC driver on Z2 requires Z2_CS_PIN."
#elif INVALID_TMC_SPI(Z3)
#error "An SPI driven TMC driver on Z3 requires Z3_CS_PIN."
Fixes for Z4 axis, CS pins (#17097)
2020-03-08 22:31:37 +01:00
#elif INVALID_TMC_SPI(Z4)
#error "An SPI driven TMC driver on Z4 requires Z4_CS_PIN."
Add TMC2209 support (#14249)
2019-06-20 22:47:50 +02:00
#elif INVALID_TMC_SPI(E0)
#error "An SPI driven TMC driver on E0 requires E0_CS_PIN."
#elif INVALID_TMC_SPI(E1)
#error "An SPI driven TMC driver on E1 requires E1_CS_PIN."
#elif INVALID_TMC_SPI(E2)
#error "An SPI driven TMC driver on E2 requires E2_CS_PIN."
#elif INVALID_TMC_SPI(E3)
#error "An SPI driven TMC driver on E3 requires E3_CS_PIN."
#elif INVALID_TMC_SPI(E4)
#error "An SPI driven TMC driver on E4 requires E4_CS_PIN."
#elif INVALID_TMC_SPI(E5)
#error "An SPI driven TMC driver on E5 requires E5_CS_PIN."
BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (#16595)
2020-01-25 09:13:39 +01:00
#elif INVALID_TMC_SPI(E6)
#error "An SPI driven TMC driver on E6 requires E6_CS_PIN."
#elif INVALID_TMC_SPI(E7)
#error "An SPI driven TMC driver on E7 requires E7_CS_PIN."
Add TMC2209 support (#14249)
2019-06-20 22:47:50 +02:00
#endif
#undef INVALID_TMC_SPI
Followup to menu refactor. TMC warnings, sanity. (#12288) - Followup fixes for menu refactor - Fix TMC sanity checks, unused var warnings
2018-11-01 22:13:33 +01:00
/**
* Check existing RX/TX pins against enable TMC UART drivers.
*/
STM32duino - Use SDIO for onboard SD (#16756)
2020-02-04 08:24:11 +01:00
#define INVALID_TMC_UART(ST) (AXIS_HAS_UART(ST) && !(defined(ST##_HARDWARE_SERIAL) || (PINS_EXIST(ST##_SERIAL_RX, ST##_SERIAL_TX))))
Add TMC2209 support (#14249)
2019-06-20 22:47:50 +02:00
#if INVALID_TMC_UART(X)
#error "TMC2208 or TMC2209 on X requires X_HARDWARE_SERIAL or X_SERIAL_(RX|TX)_PIN."
#elif INVALID_TMC_UART(X2)
#error "TMC2208 or TMC2209 on X2 requires X2_HARDWARE_SERIAL or X2_SERIAL_(RX|TX)_PIN."
#elif INVALID_TMC_UART(Y)
#error "TMC2208 or TMC2209 on Y requires Y_HARDWARE_SERIAL or Y_SERIAL_(RX|TX)_PIN."
#elif INVALID_TMC_UART(Y2)
#error "TMC2208 or TMC2209 on Y2 requires Y2_HARDWARE_SERIAL or Y2_SERIAL_(RX|TX)_PIN."
#elif INVALID_TMC_UART(Z)
#error "TMC2208 or TMC2209 on Z requires Z_HARDWARE_SERIAL or Z_SERIAL_(RX|TX)_PIN."
#elif INVALID_TMC_UART(Z2)
#error "TMC2208 or TMC2209 on Z2 requires Z2_HARDWARE_SERIAL or Z2_SERIAL_(RX|TX)_PIN."
#elif INVALID_TMC_UART(Z3)
#error "TMC2208 or TMC2209 on Z3 requires Z3_HARDWARE_SERIAL or Z3_SERIAL_(RX|TX)_PIN."
Fixes for Z4 axis, CS pins (#17097)
2020-03-08 22:31:37 +01:00
#elif INVALID_TMC_UART(Z4)
#error "TMC2208 or TMC2209 on Z4 requires Z4_HARDWARE_SERIAL or Z4_SERIAL_(RX|TX)_PIN."
Add TMC2209 support (#14249)
2019-06-20 22:47:50 +02:00
#elif INVALID_TMC_UART(E0)
#error "TMC2208 or TMC2209 on E0 requires E0_HARDWARE_SERIAL or E0_SERIAL_(RX|TX)_PIN."
#elif INVALID_TMC_UART(E1)
#error "TMC2208 or TMC2209 on E1 requires E1_HARDWARE_SERIAL or E1_SERIAL_(RX|TX)_PIN."
#elif INVALID_TMC_UART(E2)
#error "TMC2208 or TMC2209 on E2 requires E2_HARDWARE_SERIAL or E2_SERIAL_(RX|TX)_PIN."
#elif INVALID_TMC_UART(E3)
#error "TMC2208 or TMC2209 on E3 requires E3_HARDWARE_SERIAL or E3_SERIAL_(RX|TX)_PIN."
#elif INVALID_TMC_UART(E4)
#error "TMC2208 or TMC2209 on E4 requires E4_HARDWARE_SERIAL or E4_SERIAL_(RX|TX)_PIN."
#elif INVALID_TMC_UART(E5)
#error "TMC2208 or TMC2209 on E5 requires E5_HARDWARE_SERIAL or E5_SERIAL_(RX|TX)_PIN."
BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (#16595)
2020-01-25 09:13:39 +01:00
#elif INVALID_TMC_UART(E6)
#error "TMC2208 or TMC2209 on E6 requires E6_HARDWARE_SERIAL or E6_SERIAL_(RX|TX)_PIN."
#elif INVALID_TMC_UART(E7)
#error "TMC2208 or TMC2209 on E7 requires E7_HARDWARE_SERIAL or E7_SERIAL_(RX|TX)_PIN."
Add TMC2209 support (#14249)
2019-06-20 22:47:50 +02:00
#endif
#undef INVALID_TMC_UART
/**
* TMC2209 slave address values
*/
#define INVALID_TMC_ADDRESS(ST) static_assert(0 <= ST##_SLAVE_ADDRESS && ST##_SLAVE_ADDRESS <= 3, "TMC2209 slave address must be 0, 1, 2 or 3")
#if AXIS_DRIVER_TYPE_X(TMC2209)
INVALID_TMC_ADDRESS(X);
#elif AXIS_DRIVER_TYPE_X2(TMC2209)
INVALID_TMC_ADDRESS(X2);
#elif AXIS_DRIVER_TYPE_Y(TMC2209)
INVALID_TMC_ADDRESS(Y);
#elif AXIS_DRIVER_TYPE_Y2(TMC2209)
INVALID_TMC_ADDRESS(Y2);
#elif AXIS_DRIVER_TYPE_Z(TMC2209)
INVALID_TMC_ADDRESS(Z);
#elif AXIS_DRIVER_TYPE_Z2(TMC2209)
INVALID_TMC_ADDRESS(Z2);
#elif AXIS_DRIVER_TYPE_Z3(TMC2209)
INVALID_TMC_ADDRESS(Z3);
Fixes for Z4 axis, CS pins (#17097)
2020-03-08 22:31:37 +01:00
#elif AXIS_DRIVER_TYPE_Z4(TMC2209)
INVALID_TMC_ADDRESS(Z4);
Add TMC2209 support (#14249)
2019-06-20 22:47:50 +02:00
#elif AXIS_DRIVER_TYPE_E0(TMC2209)
INVALID_TMC_ADDRESS(E0);
#elif AXIS_DRIVER_TYPE_E1(TMC2209)
INVALID_TMC_ADDRESS(E1);
#elif AXIS_DRIVER_TYPE_E2(TMC2209)
INVALID_TMC_ADDRESS(E2);
#elif AXIS_DRIVER_TYPE_E3(TMC2209)
INVALID_TMC_ADDRESS(E3);
#elif AXIS_DRIVER_TYPE_E4(TMC2209)
INVALID_TMC_ADDRESS(E4);
#elif AXIS_DRIVER_TYPE_E5(TMC2209)
INVALID_TMC_ADDRESS(E5);
More 8 extruder defines
2020-01-26 10:20:11 +01:00
#elif AXIS_DRIVER_TYPE_E6(TMC2209)
INVALID_TMC_ADDRESS(E6);
#elif AXIS_DRIVER_TYPE_E7(TMC2209)
INVALID_TMC_ADDRESS(E7);
Add TMC2209 support (#14249)
2019-06-20 22:47:50 +02:00
#endif
#undef INVALID_TMC_ADDRESS
Add TMC micro-steps sanity check (#17044) Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-03-02 20:13:04 +01:00
#define _TMC_MICROSTEP_IS_VALID(MS) (MS == 0 || MS == 2 || MS == 4 || MS == 8 || MS == 16 || MS == 32 || MS == 64 || MS == 128 || MS == 256)
#define TMC_MICROSTEP_IS_VALID(M) (!AXIS_IS_TMC(M) || _TMC_MICROSTEP_IS_VALID(M##_MICROSTEPS))
#define INVALID_TMC_MS(ST) static_assert(0, "Invalid " STRINGIFY(ST) "_MICROSTEPS. Valid values are 0, 2, 4, 8, 16, 32, 64, 128, and 256.")
#if !TMC_MICROSTEP_IS_VALID(X)
INVALID_TMC_MS(X);
#elif !TMC_MICROSTEP_IS_VALID(Y)
INVALID_TMC_MS(Y)
#elif !TMC_MICROSTEP_IS_VALID(Z)
INVALID_TMC_MS(Z)
#elif !TMC_MICROSTEP_IS_VALID(X2)
INVALID_TMC_MS(X2);
#elif !TMC_MICROSTEP_IS_VALID(Y2)
INVALID_TMC_MS(Y2)
#elif !TMC_MICROSTEP_IS_VALID(Z2)
INVALID_TMC_MS(Z2)
#elif !TMC_MICROSTEP_IS_VALID(Z3)
INVALID_TMC_MS(Z3)
#elif !TMC_MICROSTEP_IS_VALID(Z4)
INVALID_TMC_MS(Z4)
#elif !TMC_MICROSTEP_IS_VALID(E0)
INVALID_TMC_MS(E0)
#elif !TMC_MICROSTEP_IS_VALID(E1)
INVALID_TMC_MS(E1)
#elif !TMC_MICROSTEP_IS_VALID(E2)
INVALID_TMC_MS(E2)
#elif !TMC_MICROSTEP_IS_VALID(E3)
INVALID_TMC_MS(E3)
#elif !TMC_MICROSTEP_IS_VALID(E4)
INVALID_TMC_MS(E4)
#elif !TMC_MICROSTEP_IS_VALID(E5)
INVALID_TMC_MS(E5)
#elif !TMC_MICROSTEP_IS_VALID(E6)
INVALID_TMC_MS(E6)
#elif !TMC_MICROSTEP_IS_VALID(E7)
INVALID_TMC_MS(E7)
#endif
#undef INVALID_TMC_MS
#undef TMC_MICROSTEP_IS_VALID
#undef _TMC_MICROSTEP_IS_VALID
Tweak code formatting
2019-12-11 08:03:27 +01:00
#if ENABLED(DELTA) && (ENABLED(STEALTHCHOP_XY) != ENABLED(STEALTHCHOP_Z))
#error "STEALTHCHOP_XY and STEALTHCHOP_Z must be the same on DELTA."
#endif
Simplify stepper driver per-axis selection
2018-07-14 13:13:06 +02:00
#if ENABLED(SENSORLESS_HOMING)
// Require STEALTHCHOP for SENSORLESS_HOMING on DELTA as the transition from spreadCycle to stealthChop
// is necessary in order to reset the stallGuard indication between the initial movement of all three
// towers to +Z and the individual homing of each tower. This restriction can be removed once a means of
// clearing the stallGuard activated status is found.
Add TMC2209 support (#14249)
2019-06-20 22:47:50 +02:00
// Stall detection DIAG = HIGH : TMC2209
// Stall detection DIAG = LOW : TMC2130/TMC2160/TMC2660/TMC5130/TMC5160
#define X_ENDSTOP_INVERTING !AXIS_DRIVER_TYPE(X,TMC2209)
#define Y_ENDSTOP_INVERTING !AXIS_DRIVER_TYPE(Y,TMC2209)
#define Z_ENDSTOP_INVERTING !AXIS_DRIVER_TYPE(Z,TMC2209)
Extended condition macros (#13419) Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`
2019-03-17 05:43:06 +01:00
#if ENABLED(DELTA) && !BOTH(STEALTHCHOP_XY, STEALTHCHOP_Z)
Trinamic: Split stealthChop, improve driver monitoring, etc. (#12582)
2018-12-07 22:34:21 +01:00
#error "SENSORLESS_HOMING on DELTA currently requires STEALTHCHOP_XY and STEALTHCHOP_Z."
Onboard (always-on) pullups support (#16144)
2019-12-12 22:49:14 +01:00
#elif X_SENSORLESS && X_HOME_DIR < 0 && NONE(ONBOARD_ENDSTOPPULLUPS, ENDSTOPPULLUPS, ENDSTOPPULLUP_XMIN)
Improve TMC sanity checks
2019-09-25 00:20:25 +02:00
#error "SENSORLESS_HOMING requires ENDSTOPPULLUP_XMIN (or ENDSTOPPULLUPS) when homing to X_MIN."
Onboard (always-on) pullups support (#16144)
2019-12-12 22:49:14 +01:00
#elif X_SENSORLESS && X_HOME_DIR > 0 && NONE(ONBOARD_ENDSTOPPULLUPS, ENDSTOPPULLUPS, ENDSTOPPULLUP_XMAX)
Improve TMC sanity checks
2019-09-25 00:20:25 +02:00
#error "SENSORLESS_HOMING requires ENDSTOPPULLUP_XMAX (or ENDSTOPPULLUPS) when homing to X_MAX."
Onboard (always-on) pullups support (#16144)
2019-12-12 22:49:14 +01:00
#elif Y_SENSORLESS && Y_HOME_DIR < 0 && NONE(ONBOARD_ENDSTOPPULLUPS, ENDSTOPPULLUPS, ENDSTOPPULLUP_YMIN)
Improve TMC sanity checks
2019-09-25 00:20:25 +02:00
#error "SENSORLESS_HOMING requires ENDSTOPPULLUP_YMIN (or ENDSTOPPULLUPS) when homing to Y_MIN."
Onboard (always-on) pullups support (#16144)
2019-12-12 22:49:14 +01:00
#elif Y_SENSORLESS && Y_HOME_DIR > 0 && NONE(ONBOARD_ENDSTOPPULLUPS, ENDSTOPPULLUPS, ENDSTOPPULLUP_YMAX)
Improve TMC sanity checks
2019-09-25 00:20:25 +02:00
#error "SENSORLESS_HOMING requires ENDSTOPPULLUP_YMAX (or ENDSTOPPULLUPS) when homing to Y_MAX."
Onboard (always-on) pullups support (#16144)
2019-12-12 22:49:14 +01:00
#elif Z_SENSORLESS && Z_HOME_DIR < 0 && NONE(ONBOARD_ENDSTOPPULLUPS, ENDSTOPPULLUPS, ENDSTOPPULLUP_ZMIN)
Improve TMC sanity checks
2019-09-25 00:20:25 +02:00
#error "SENSORLESS_HOMING requires ENDSTOPPULLUP_ZMIN (or ENDSTOPPULLUPS) when homing to Z_MIN."
Onboard (always-on) pullups support (#16144)
2019-12-12 22:49:14 +01:00
#elif Z_SENSORLESS && Z_HOME_DIR > 0 && NONE(ONBOARD_ENDSTOPPULLUPS, ENDSTOPPULLUPS, ENDSTOPPULLUP_ZMAX)
Improve TMC sanity checks
2019-09-25 00:20:25 +02:00
#error "SENSORLESS_HOMING requires ENDSTOPPULLUP_ZMAX (or ENDSTOPPULLUPS) when homing to Z_MAX."
#elif X_SENSORLESS && X_HOME_DIR < 0 && X_MIN_ENDSTOP_INVERTING != X_ENDSTOP_INVERTING
#if X_ENDSTOP_INVERTING
#error "SENSORLESS_HOMING requires X_MIN_ENDSTOP_INVERTING = true when homing to X_MIN."
#else
#error "SENSORLESS_HOMING requires X_MIN_ENDSTOP_INVERTING = false when homing TMC2209 to X_MIN."
#endif
#elif X_SENSORLESS && X_HOME_DIR > 0 && X_MAX_ENDSTOP_INVERTING != X_ENDSTOP_INVERTING
#if X_ENDSTOP_INVERTING
#error "SENSORLESS_HOMING requires X_MAX_ENDSTOP_INVERTING = true when homing to X_MAX."
#else
#error "SENSORLESS_HOMING requires X_MAX_ENDSTOP_INVERTING = false when homing TMC2209 to X_MAX."
#endif
#elif Y_SENSORLESS && Y_HOME_DIR < 0 && Y_MIN_ENDSTOP_INVERTING != Y_ENDSTOP_INVERTING
#if Y_ENDSTOP_INVERTING
#error "SENSORLESS_HOMING requires Y_MIN_ENDSTOP_INVERTING = true when homing to Y_MIN."
#else
#error "SENSORLESS_HOMING requires Y_MIN_ENDSTOP_INVERTING = false when homing TMC2209 to Y_MIN."
#endif
#elif Y_SENSORLESS && Y_HOME_DIR > 0 && Y_MAX_ENDSTOP_INVERTING != Y_ENDSTOP_INVERTING
#if Y_ENDSTOP_INVERTING
#error "SENSORLESS_HOMING requires Y_MAX_ENDSTOP_INVERTING = true when homing to Y_MAX."
#else
#error "SENSORLESS_HOMING requires Y_MAX_ENDSTOP_INVERTING = false when homing TMC2209 to Y_MAX."
#endif
#elif Z_SENSORLESS && Z_HOME_DIR < 0 && Z_MIN_ENDSTOP_INVERTING != Z_ENDSTOP_INVERTING
#if Z_ENDSTOP_INVERTING
#error "SENSORLESS_HOMING requires Z_MIN_ENDSTOP_INVERTING = true when homing to Z_MIN."
#else
#error "SENSORLESS_HOMING requires Z_MIN_ENDSTOP_INVERTING = false when homing TMC2209 to Z_MIN."
#endif
#elif Z_SENSORLESS && Z_HOME_DIR > 0 && Z_MAX_ENDSTOP_INVERTING != Z_ENDSTOP_INVERTING
#if Z_ENDSTOP_INVERTING
#error "SENSORLESS_HOMING requires Z_MAX_ENDSTOP_INVERTING = true when homing to Z_MAX."
#else
#error "SENSORLESS_HOMING requires Z_MAX_ENDSTOP_INVERTING = false when homing TMC2209 to Z_MAX."
#endif
Expose: Homing Validation and Endstop Noise Threshold (#11912)
2018-09-25 03:59:12 +02:00
#elif ENDSTOP_NOISE_THRESHOLD
#error "SENSORLESS_HOMING is incompatible with ENDSTOP_NOISE_THRESHOLD."
Undefine sanity check tests when done
2019-06-08 13:28:49 +02:00
#elif !(X_SENSORLESS || Y_SENSORLESS || Z_SENSORLESS)
#error "SENSORLESS_HOMING requires a TMC stepper driver with StallGuard on X, Y, or Z axes."
Simplify stepper driver per-axis selection
2018-07-14 13:13:06 +02:00
#endif
Add TMC2209 support (#14249)
2019-06-20 22:47:50 +02:00
#undef X_ENDSTOP_INVERTING
#undef Y_ENDSTOP_INVERTING
#undef Z_ENDSTOP_INVERTING
Fix TMC gcode commands
2017-12-29 20:38:08 +01:00
#endif
Undefine sanity check tests when done
2019-06-08 13:28:49 +02:00
// Sensorless probing requirements
#if ENABLED(SENSORLESS_PROBING)
#if ENABLED(DELTA) && !(X_SENSORLESS && Y_SENSORLESS && Z_SENSORLESS)
#error "SENSORLESS_PROBING for DELTA requires TMC stepper drivers with StallGuard on X, Y, and Z axes."
#elif !Z_SENSORLESS
#error "SENSORLESS_PROBING requires a TMC stepper driver with StallGuard on Z."
#endif
Followup to menu refactor. TMC warnings, sanity. (#12288) - Followup fixes for menu refactor - Fix TMC sanity checks, unused var warnings
2018-11-01 22:13:33 +01:00
#endif
Simplify stepper driver per-axis selection
2018-07-14 13:13:06 +02:00
// Sensorless homing is required for both combined steppers in an H-bot
#if CORE_IS_XY && X_SENSORLESS != Y_SENSORLESS
No Z sensorless req'd if homing with probe Fixes #16674
2020-02-11 11:15:10 +01:00
#error "CoreXY requires both X and Y to use sensorless homing if either one does."
#elif CORE_IS_XZ && X_SENSORLESS != Z_SENSORLESS && !HOMING_Z_WITH_PROBE
#error "CoreXZ requires both X and Z to use sensorless homing if either one does."
#elif CORE_IS_YZ && Y_SENSORLESS != Z_SENSORLESS && !HOMING_Z_WITH_PROBE
#error "CoreYZ requires both Y and Z to use sensorless homing if either one does."
Cleanup, extend TMC2130 configuration
2017-04-15 05:43:56 +02:00
#endif
Add TMC2130 sensorless probing
2018-09-09 21:59:12 +02:00
// Other TMC feature requirements
Trinamic: Split stealthChop, improve driver monitoring, etc. (#12582)
2018-12-07 22:34:21 +01:00
#if ENABLED(HYBRID_THRESHOLD) && !STEALTHCHOP_ENABLED
#error "Enable STEALTHCHOP_(XY|Z|E) to use HYBRID_THRESHOLD."
Add TMC2130 sensorless probing
2018-09-09 21:59:12 +02:00
#elif ENABLED(SENSORLESS_HOMING) && !HAS_STALLGUARD
Add TMC2209 support (#14249)
2019-06-20 22:47:50 +02:00
#error "SENSORLESS_HOMING requires TMC2130, TMC2160, TMC2209, TMC2660, or TMC5160 stepper drivers."
Add TMC2130 sensorless probing
2018-09-09 21:59:12 +02:00
#elif ENABLED(SENSORLESS_PROBING) && !HAS_STALLGUARD
Add TMC2209 support (#14249)
2019-06-20 22:47:50 +02:00
#error "SENSORLESS_PROBING requires TMC2130, TMC2160, TMC2209, TMC2660, or TMC5160 stepper drivers."
Trinamic: Split stealthChop, improve driver monitoring, etc. (#12582)
2018-12-07 22:34:21 +01:00
#elif STEALTHCHOP_ENABLED && !HAS_STEALTHCHOP
Add TMC2209 support (#14249)
2019-06-20 22:47:50 +02:00
#error "STEALTHCHOP requires TMC2130, TMC2160, TMC2208, TMC2209, or TMC5160 stepper drivers."
Add TMC2130 sensorless probing
2018-09-09 21:59:12 +02:00
#endif
Improve TMC config organization, naming
2018-03-13 08:06:40 +01:00
Fixes for Z4 axis, CS pins (#17097)
2020-03-08 22:31:37 +01:00
/**
* TMC SPI Chaining
*/
Improved STMicro L64XX stepper driver support (#16452)
2020-01-14 01:47:30 +01:00
#define IN_CHAIN(A) ((A##_CHAIN_POS > 0) && !HAS_L64XX)
Fixes for Z4 axis, CS pins (#17097)
2020-03-08 22:31:37 +01:00
#if IN_CHAIN(X ) || IN_CHAIN(Y ) || IN_CHAIN(Z ) || IN_CHAIN(X2) || IN_CHAIN(Y2) || IN_CHAIN(Z2) || IN_CHAIN(Z3) || IN_CHAIN(Z4) \
|| IN_CHAIN(E0) || IN_CHAIN(E1) || IN_CHAIN(E2) || IN_CHAIN(E3) || IN_CHAIN(E4) || IN_CHAIN(E5) || IN_CHAIN(E6) || IN_CHAIN(E7)
#define BAD_CHAIN(A) (IN_CHAIN(A) && !PIN_EXISTS(A##_CS))
#if BAD_CHAIN(X ) || BAD_CHAIN(Y ) || BAD_CHAIN(Z ) || BAD_CHAIN(X2) || BAD_CHAIN(Y2) || BAD_CHAIN(Z2) || BAD_CHAIN(Z3) || BAD_CHAIN(Z4) \
|| BAD_CHAIN(E0) || BAD_CHAIN(E1) || BAD_CHAIN(E2) || BAD_CHAIN(E3) || BAD_CHAIN(E4) || BAD_CHAIN(E5) || BAD_CHAIN(E6) || BAD_CHAIN(E7)
SPI chaining with TMCStepper simplified interface (#15179)
2019-09-29 12:47:20 +02:00
#error "All chained TMC drivers need a CS pin."
TMC SPI daisy chain support (experimental) (#15081)
2019-08-31 00:39:45 +02:00
#else
SPI chaining with TMCStepper simplified interface (#15179)
2019-09-29 12:47:20 +02:00
#if IN_CHAIN(X)
TMC SPI daisy chain support (experimental) (#15081)
2019-08-31 00:39:45 +02:00
#define CS_COMPARE X_CS_PIN
SPI chaining with TMCStepper simplified interface (#15179)
2019-09-29 12:47:20 +02:00
#elif IN_CHAIN(Y)
TMC SPI daisy chain support (experimental) (#15081)
2019-08-31 00:39:45 +02:00
#define CS_COMPARE Y_CS_PIN
SPI chaining with TMCStepper simplified interface (#15179)
2019-09-29 12:47:20 +02:00
#elif IN_CHAIN(Z)
TMC SPI daisy chain support (experimental) (#15081)
2019-08-31 00:39:45 +02:00
#define CS_COMPARE Z_CS_PIN
SPI chaining with TMCStepper simplified interface (#15179)
2019-09-29 12:47:20 +02:00
#elif IN_CHAIN(X2)
TMC SPI daisy chain support (experimental) (#15081)
2019-08-31 00:39:45 +02:00
#define CS_COMPARE X2_CS_PIN
SPI chaining with TMCStepper simplified interface (#15179)
2019-09-29 12:47:20 +02:00
#elif IN_CHAIN(Y2)
TMC SPI daisy chain support (experimental) (#15081)
2019-08-31 00:39:45 +02:00
#define CS_COMPARE Y2_CS_PIN
SPI chaining with TMCStepper simplified interface (#15179)
2019-09-29 12:47:20 +02:00
#elif IN_CHAIN(Z2)
TMC SPI daisy chain support (experimental) (#15081)
2019-08-31 00:39:45 +02:00
#define CS_COMPARE Z2_CS_PIN
SPI chaining with TMCStepper simplified interface (#15179)
2019-09-29 12:47:20 +02:00
#elif IN_CHAIN(Z3)
TMC SPI daisy chain support (experimental) (#15081)
2019-08-31 00:39:45 +02:00
#define CS_COMPARE Z3_CS_PIN
SPI chaining with TMCStepper simplified interface (#15179)
2019-09-29 12:47:20 +02:00
#elif IN_CHAIN(E0)
TMC SPI daisy chain support (experimental) (#15081)
2019-08-31 00:39:45 +02:00
#define CS_COMPARE E0_CS_PIN
SPI chaining with TMCStepper simplified interface (#15179)
2019-09-29 12:47:20 +02:00
#elif IN_CHAIN(E1)
TMC SPI daisy chain support (experimental) (#15081)
2019-08-31 00:39:45 +02:00
#define CS_COMPARE E1_CS_PIN
SPI chaining with TMCStepper simplified interface (#15179)
2019-09-29 12:47:20 +02:00
#elif IN_CHAIN(E2)
TMC SPI daisy chain support (experimental) (#15081)
2019-08-31 00:39:45 +02:00
#define CS_COMPARE E2_CS_PIN
SPI chaining with TMCStepper simplified interface (#15179)
2019-09-29 12:47:20 +02:00
#elif IN_CHAIN(E3)
TMC SPI daisy chain support (experimental) (#15081)
2019-08-31 00:39:45 +02:00
#define CS_COMPARE E3_CS_PIN
SPI chaining with TMCStepper simplified interface (#15179)
2019-09-29 12:47:20 +02:00
#elif IN_CHAIN(E4)
TMC SPI daisy chain support (experimental) (#15081)
2019-08-31 00:39:45 +02:00
#define CS_COMPARE E4_CS_PIN
SPI chaining with TMCStepper simplified interface (#15179)
2019-09-29 12:47:20 +02:00
#elif IN_CHAIN(E5)
TMC SPI daisy chain support (experimental) (#15081)
2019-08-31 00:39:45 +02:00
#define CS_COMPARE E5_CS_PIN
BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (#16595)
2020-01-25 09:13:39 +01:00
#elif IN_CHAIN(E6)
#define CS_COMPARE E6_CS_PIN
#elif IN_CHAIN(E7)
#define CS_COMPARE E7_CS_PIN
TMC SPI daisy chain support (experimental) (#15081)
2019-08-31 00:39:45 +02:00
#endif
Fixes for Z4 axis, CS pins (#17097)
2020-03-08 22:31:37 +01:00
#define BAD_CS_PIN(A) (IN_CHAIN(A) && A##_CS_PIN != CS_COMPARE)
#if BAD_CS_PIN(X ) || BAD_CS_PIN(Y ) || BAD_CS_PIN(Z ) || BAD_CS_PIN(X2) || BAD_CS_PIN(Y2) || BAD_CS_PIN(Z2) || BAD_CS_PIN(Z3) || BAD_CS_PIN(Z4) \
|| BAD_CS_PIN(E0) || BAD_CS_PIN(E1) || BAD_CS_PIN(E2) || BAD_CS_PIN(E3) || BAD_CS_PIN(E4) || BAD_CS_PIN(E5) || BAD_CS_PIN(E6) || BAD_CS_PIN(E7)
SPI chaining with TMCStepper simplified interface (#15179)
2019-09-29 12:47:20 +02:00
#error "All chained TMC drivers must use the same CS pin."
TMC SPI daisy chain support (experimental) (#15081)
2019-08-31 00:39:45 +02:00
#endif
Fixes for Z4 axis, CS pins (#17097)
2020-03-08 22:31:37 +01:00
#undef BAD_CS_PIN
#undef CS_COMPARE
TMC SPI daisy chain support (experimental) (#15081)
2019-08-31 00:39:45 +02:00
#endif
Fixes for Z4 axis, CS pins (#17097)
2020-03-08 22:31:37 +01:00
#undef BAD_CHAIN
SPI chaining with TMCStepper simplified interface (#15179)
2019-09-29 12:47:20 +02:00
#endif
#undef IN_CHAIN
TMC SPI daisy chain support (experimental) (#15081)
2019-08-31 00:39:45 +02:00
Add 4 new LCD displays
2017-10-09 22:58:02 +02:00
/**
* Digipot requirement
*/
Option to use raw digipot values (#17536)
2020-04-19 05:56:23 +02:00
#if HAS_I2C_DIGIPOT
#if BOTH(DIGIPOT_MCP4018, DIGIPOT_MCP4451)
#error "Enable only one of DIGIPOT_MCP4018 or DIGIPOT_MCP4451."
Use MCP4451 interface for MKS SBASE Followup to #17536
2020-04-25 19:02:16 +02:00
#elif !MB(MKS_SBASE) \
&& (!defined(DIGIPOTS_I2C_SDA_X) || !defined(DIGIPOTS_I2C_SDA_Y) || !defined(DIGIPOTS_I2C_SDA_Z) || !defined(DIGIPOTS_I2C_SDA_E0) || !defined(DIGIPOTS_I2C_SDA_E1))
Option to use raw digipot values (#17536)
2020-04-19 05:56:23 +02:00
#error "DIGIPOT_MCP4018/4451 requires DIGIPOTS_I2C_SDA_* pins to be defined."
Add 4 new LCD displays
2017-10-09 22:58:02 +02:00
#endif
#endif
Sanity check per-axis settings for size
2017-04-13 13:25:43 +02:00
/**
Sanity-check for negative steps, feedrate, accel
2018-12-08 02:37:12 +01:00
* Check per-axis initializers for errors
Sanity check per-axis settings for size
2017-04-13 13:25:43 +02:00
*/
constexpr float sanity_arr_1[] = DEFAULT_AXIS_STEPS_PER_UNIT,
sanity_arr_2[] = DEFAULT_MAX_FEEDRATE,
sanity_arr_3[] = DEFAULT_MAX_ACCELERATION;
Sanity-check for negative steps, feedrate, accel
2018-12-08 02:37:12 +01:00
Fix MIN/MAX function collision with macros
2019-07-06 01:01:21 +02:00
#define _ARR_TEST(N,I) (sanity_arr_##N[_MIN(I,int(COUNT(sanity_arr_##N))-1)] > 0)
Fix sanity checks for distinct E factor settings Reference #13156
2019-02-25 07:18:58 +01:00
Configurable Max Accel, Max Feedrate, Max Jerk edit limits (#13929)
2019-10-02 02:59:48 +02:00
static_assert(COUNT(sanity_arr_1) >= XYZE, "DEFAULT_AXIS_STEPS_PER_UNIT requires X, Y, Z and E elements.");
Extend error messages for E factors sanity-checks
2018-11-05 01:42:36 +01:00
static_assert(COUNT(sanity_arr_1) <= XYZE_N, "DEFAULT_AXIS_STEPS_PER_UNIT has too many elements. (Did you forget to enable DISTINCT_E_FACTORS?)");
Fix sanity checks for distinct E factor settings Reference #13156
2019-02-25 07:18:58 +01:00
static_assert( _ARR_TEST(1,0) && _ARR_TEST(1,1) && _ARR_TEST(1,2)
&& _ARR_TEST(1,3) && _ARR_TEST(1,4) && _ARR_TEST(1,5)
&& _ARR_TEST(1,6) && _ARR_TEST(1,7) && _ARR_TEST(1,8),
"DEFAULT_AXIS_STEPS_PER_UNIT values must be positive.");
Sanity-check for negative steps, feedrate, accel
2018-12-08 02:37:12 +01:00
Configurable Max Accel, Max Feedrate, Max Jerk edit limits (#13929)
2019-10-02 02:59:48 +02:00
static_assert(COUNT(sanity_arr_2) >= XYZE, "DEFAULT_MAX_FEEDRATE requires X, Y, Z and E elements.");
Extend error messages for E factors sanity-checks
2018-11-05 01:42:36 +01:00
static_assert(COUNT(sanity_arr_2) <= XYZE_N, "DEFAULT_MAX_FEEDRATE has too many elements. (Did you forget to enable DISTINCT_E_FACTORS?)");
Fix sanity checks for distinct E factor settings Reference #13156
2019-02-25 07:18:58 +01:00
static_assert( _ARR_TEST(2,0) && _ARR_TEST(2,1) && _ARR_TEST(2,2)
&& _ARR_TEST(2,3) && _ARR_TEST(2,4) && _ARR_TEST(2,5)
&& _ARR_TEST(2,6) && _ARR_TEST(2,7) && _ARR_TEST(2,8),
"DEFAULT_MAX_FEEDRATE values must be positive.");
Sanity-check for negative steps, feedrate, accel
2018-12-08 02:37:12 +01:00
Configurable Max Accel, Max Feedrate, Max Jerk edit limits (#13929)
2019-10-02 02:59:48 +02:00
static_assert(COUNT(sanity_arr_3) >= XYZE, "DEFAULT_MAX_ACCELERATION requires X, Y, Z and E elements.");
Extend error messages for E factors sanity-checks
2018-11-05 01:42:36 +01:00
static_assert(COUNT(sanity_arr_3) <= XYZE_N, "DEFAULT_MAX_ACCELERATION has too many elements. (Did you forget to enable DISTINCT_E_FACTORS?)");
Fix sanity checks for distinct E factor settings Reference #13156
2019-02-25 07:18:58 +01:00
static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
&& _ARR_TEST(3,3) && _ARR_TEST(3,4) && _ARR_TEST(3,5)
&& _ARR_TEST(3,6) && _ARR_TEST(3,7) && _ARR_TEST(3,8),
"DEFAULT_MAX_ACCELERATION values must be positive.");
Configurable Max Accel, Max Feedrate, Max Jerk edit limits (#13929)
2019-10-02 02:59:48 +02:00
#if ENABLED(LIMITED_MAX_ACCEL_EDITING)
#ifdef MAX_ACCEL_EDIT_VALUES
constexpr float sanity_arr_4[] = MAX_ACCEL_EDIT_VALUES;
static_assert(COUNT(sanity_arr_4) >= XYZE, "MAX_ACCEL_EDIT_VALUES requires X, Y, Z and E elements.");
static_assert(COUNT(sanity_arr_4) <= XYZE, "MAX_ACCEL_EDIT_VALUES has too many elements. X, Y, Z and E elements only.");
static_assert( _ARR_TEST(4,0) && _ARR_TEST(4,1) && _ARR_TEST(4,2)
&& _ARR_TEST(4,3) && _ARR_TEST(4,4) && _ARR_TEST(4,5)
&& _ARR_TEST(4,6) && _ARR_TEST(4,7) && _ARR_TEST(4,8),
"MAX_ACCEL_EDIT_VALUES values must be positive.");
#endif
#endif
#if ENABLED(LIMITED_MAX_FR_EDITING)
#ifdef MAX_FEEDRATE_EDIT_VALUES
constexpr float sanity_arr_5[] = MAX_FEEDRATE_EDIT_VALUES;
static_assert(COUNT(sanity_arr_5) >= XYZE, "MAX_FEEDRATE_EDIT_VALUES requires X, Y, Z and E elements.");
static_assert(COUNT(sanity_arr_5) <= XYZE, "MAX_FEEDRATE_EDIT_VALUES has too many elements. X, Y, Z and E elements only.");
static_assert( _ARR_TEST(5,0) && _ARR_TEST(5,1) && _ARR_TEST(5,2)
&& _ARR_TEST(5,3) && _ARR_TEST(5,4) && _ARR_TEST(5,5)
&& _ARR_TEST(5,6) && _ARR_TEST(5,7) && _ARR_TEST(5,8),
"MAX_FEEDRATE_EDIT_VALUES values must be positive.");
#endif
#endif
#if ENABLED(LIMITED_JERK_EDITING)
#ifdef MAX_JERK_EDIT_VALUES
constexpr float sanity_arr_6[] = MAX_JERK_EDIT_VALUES;
static_assert(COUNT(sanity_arr_6) >= XYZE, "MAX_JERK_EDIT_VALUES requires X, Y, Z and E elements.");
static_assert(COUNT(sanity_arr_6) <= XYZE, "MAX_JERK_EDIT_VALUES has too many elements. X, Y, Z and E elements only.");
static_assert( _ARR_TEST(6,0) && _ARR_TEST(6,1) && _ARR_TEST(6,2)
&& _ARR_TEST(6,3) && _ARR_TEST(6,4) && _ARR_TEST(6,5)
&& _ARR_TEST(6,6) && _ARR_TEST(6,7) && _ARR_TEST(6,8),
"MAX_JERK_EDIT_VALUES values must be positive.");
#endif
#endif
Fix sanity checks for distinct E factor settings Reference #13156
2019-02-25 07:18:58 +01:00
#undef _ARR_TEST
SPINDLE/LASER config changes
2017-04-07 20:52:05 +02:00
Extended condition macros (#13419) Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`
2019-03-17 05:43:06 +01:00
#if BOTH(CNC_COORDINATE_SYSTEMS, NO_WORKSPACE_OFFSETS)
Implement CNC_COORDINATE_SYSTEMS
2017-11-04 22:36:41 +01:00
#error "CNC_COORDINATE_SYSTEMS is incompatible with NO_WORKSPACE_OFFSETS."
#endif
Tweak BLOCK_BUFFER_SIZE description
2017-11-27 00:36:40 +01:00
#if !BLOCK_BUFFER_SIZE || !IS_POWER_OF_2(BLOCK_BUFFER_SIZE)
#error "BLOCK_BUFFER_SIZE must be a power of 2."
#endif
LED_CONTROL_MENU config changes
2017-11-28 08:05:51 +01:00
#if ENABLED(LED_CONTROL_MENU) && DISABLED(ULTIPANEL)
#error "LED_CONTROL_MENU requires an LCD controller."
#endif
Update indentation, file-wrapping for Marlin 2.0.x
2017-10-19 07:43:07 +02:00
[2.0.x] Option to use Neopixel as case light (#9270) * Add option to use Neopixel as case light * Apply CASE_LIGHT_USE_NEOPIXEL to example configs
2018-01-20 23:58:41 +01:00
#if ENABLED(CASE_LIGHT_USE_NEOPIXEL) && DISABLED(NEOPIXEL_LED)
#error "CASE_LIGHT_USE_NEOPIXEL requires NEOPIXEL_LED."
#endif
New feature: BED_SKEW_CORRECTION
2017-12-01 23:42:23 +01:00
#if ENABLED(SKEW_CORRECTION)
#if !defined(XY_SKEW_FACTOR) && !(defined(XY_DIAG_AC) && defined(XY_DIAG_BD) && defined(XY_SIDE_AD))
#error "SKEW_CORRECTION requires XY_SKEW_FACTOR or XY_DIAG_AC, XY_DIAG_BD, XY_SIDE_AD."
#endif
#if ENABLED(SKEW_CORRECTION_FOR_Z)
#if !defined(XZ_SKEW_FACTOR) && !(defined(XZ_DIAG_AC) && defined(XZ_DIAG_BD) && defined(XZ_SIDE_AD))
#error "SKEW_CORRECTION requires XZ_SKEW_FACTOR or XZ_DIAG_AC, XZ_DIAG_BD, XZ_SIDE_AD."
#endif
#if !defined(YZ_SKEW_FACTOR) && !(defined(YZ_DIAG_AC) && defined(YZ_DIAG_BD) && defined(YZ_SIDE_AD))
#error "SKEW_CORRECTION requires YZ_SKEW_FACTOR or YZ_DIAG_AC, YZ_DIAG_BD, YZ_SIDE_AD."
#endif
#endif
#endif
Power Loss Recovery with a UPS (#15943)
2019-11-21 00:40:21 +01:00
#if ENABLED(BACKUP_POWER_SUPPLY) && !PIN_EXISTS(POWER_LOSS)
#error "BACKUP_POWER_SUPPLY requires a POWER_LOSS_PIN."
Creality3D Power-Loss Recovery
2018-04-22 02:41:26 +02:00
#endif
G34 Auto-align multi-stepper Z axis (#11302)
2018-10-29 20:01:36 +01:00
#if ENABLED(Z_STEPPER_AUTO_ALIGN)
Quad Z stepper support (#16277)
2020-01-20 06:35:07 +01:00
#if NUM_Z_STEPPER_DRIVERS <= 1
#error "Z_STEPPER_AUTO_ALIGN requires NUM_Z_STEPPER_DRIVERS greater than 1."
G34 Auto-align multi-stepper Z axis (#11302)
2018-10-29 20:01:36 +01:00
#elif !HAS_BED_PROBE
#error "Z_STEPPER_AUTO_ALIGN requires a Z-bed probe."
Quad Z leveling, G34 (R)ecalculate (#17122)
2020-03-14 05:22:04 +01:00
#elif ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) && NUM_Z_STEPPER_DRIVERS < 3
#error "Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS requires NUM_Z_STEPPER_DRIVERS to be 3 or 4."
G34 Auto-align multi-stepper Z axis (#11302)
2018-10-29 20:01:36 +01:00
#endif
#endif
Printcounter improvements (#11689)
2018-09-01 00:40:39 +02:00
#if ENABLED(PRINTCOUNTER) && DISABLED(EEPROM_SETTINGS)
#error "PRINTCOUNTER requires EEPROM_SETTINGS. Please update your Configuration."
#endif
STM32duino - Use SDIO for onboard SD (#16756)
2020-02-04 08:24:11 +01:00
#if ENABLED(USB_FLASH_DRIVE_SUPPORT) && !PINS_EXIST(USB_CS, USB_INTR)
Add USB_FLASH_DRIVE_SUPPORT
2018-07-02 17:06:17 +02:00
#error "USB_CS_PIN and USB_INTR_PIN are required for USB_FLASH_DRIVE_SUPPORT."
#endif
Add SD Firmware Update capability (#12043) Co-Authored-By: timoxd7 <timoxd7@users.noreply.github.com>
2018-10-10 03:00:47 +02:00
#if ENABLED(SD_FIRMWARE_UPDATE) && !defined(__AVR_ATmega2560__)
#error "SD_FIRMWARE_UPDATE requires an ATmega2560-based (Arduino Mega) board."
#endif
[2.0.x] Macro G-codes (#9365)
2018-11-09 12:25:08 +01:00
#if ENABLED(GCODE_MACROS) && !WITHIN(GCODE_MACROS_SLOTS, 1, 10)
#error "GCODE_MACROS_SLOTS must be a number from 1 to 10."
#endif
M425 Backlash Correction (#11061)
2018-12-08 21:36:46 +01:00
Sanity check USER_GCODE formatting
2019-02-04 13:36:21 +01:00
#if ENABLED(CUSTOM_USER_MENUS)
#ifdef USER_GCODE_1
constexpr char _chr1 = USER_GCODE_1[strlen(USER_GCODE_1) - 1];
static_assert(_chr1 != '\n' && _chr1 != '\r', "USER_GCODE_1 cannot have a newline at the end. Please remove it.");
#endif
#ifdef USER_GCODE_2
constexpr char _chr2 = USER_GCODE_2[strlen(USER_GCODE_2) - 1];
static_assert(_chr2 != '\n' && _chr2 != '\r', "USER_GCODE_2 cannot have a newline at the end. Please remove it.");
#endif
#ifdef USER_GCODE_3
constexpr char _chr3 = USER_GCODE_3[strlen(USER_GCODE_3) - 1];
static_assert(_chr3 != '\n' && _chr3 != '\r', "USER_GCODE_3 cannot have a newline at the end. Please remove it.");
#endif
#ifdef USER_GCODE_4
constexpr char _chr4 = USER_GCODE_4[strlen(USER_GCODE_4) - 1];
static_assert(_chr4 != '\n' && _chr4 != '\r', "USER_GCODE_4 cannot have a newline at the end. Please remove it.");
#endif
#ifdef USER_GCODE_5
constexpr char _chr5 = USER_GCODE_5[strlen(USER_GCODE_5) - 1];
static_assert(_chr5 != '\n' && _chr5 != '\r', "USER_GCODE_5 cannot have a newline at the end. Please remove it.");
#endif
Finish Custom User Menu sanity-check (#16917)
2020-02-23 01:33:34 +01:00
#ifdef USER_GCODE_6
constexpr char _chr6 = USER_GCODE_6[strlen(USER_GCODE_6) - 1];
static_assert(_chr6 != '\n' && _chr6 != '\r', "USER_GCODE_6 cannot have a newline at the end. Please remove it.");
#endif
#ifdef USER_GCODE_7
constexpr char _chr7 = USER_GCODE_7[strlen(USER_GCODE_7) - 1];
static_assert(_chr7 != '\n' && _chr7 != '\r', "USER_GCODE_7 cannot have a newline at the end. Please remove it.");
#endif
#ifdef USER_GCODE_8
constexpr char _chr8 = USER_GCODE_8[strlen(USER_GCODE_8) - 1];
static_assert(_chr8 != '\n' && _chr8 != '\r', "USER_GCODE_8 cannot have a newline at the end. Please remove it.");
#endif
#ifdef USER_GCODE_9
constexpr char _chr9 = USER_GCODE_9[strlen(USER_GCODE_9) - 1];
static_assert(_chr9 != '\n' && _chr9 != '\r', "USER_GCODE_9 cannot have a newline at the end. Please remove it.");
#endif
#ifdef USER_GCODE_10
constexpr char _chr10 = USER_GCODE_10[strlen(USER_GCODE_10) - 1];
static_assert(_chr10 != '\n' && _chr10 != '\r', "USER_GCODE_10 cannot have a newline at the end. Please remove it.");
#endif
#ifdef USER_GCODE_11
constexpr char _chr11 = USER_GCODE_11[strlen(USER_GCODE_11) - 1];
static_assert(_chr11 != '\n' && _chr11 != '\r', "USER_GCODE_11 cannot have a newline at the end. Please remove it.");
#endif
#ifdef USER_GCODE_12
constexpr char _chr12 = USER_GCODE_12[strlen(USER_GCODE_12) - 1];
static_assert(_chr12 != '\n' && _chr12 != '\r', "USER_GCODE_12 cannot have a newline at the end. Please remove it.");
#endif
#ifdef USER_GCODE_13
constexpr char _chr13 = USER_GCODE_13[strlen(USER_GCODE_13) - 1];
static_assert(_chr13 != '\n' && _chr13 != '\r', "USER_GCODE_13 cannot have a newline at the end. Please remove it.");
#endif
#ifdef USER_GCODE_14
constexpr char _chr14 = USER_GCODE_14[strlen(USER_GCODE_14) - 1];
static_assert(_chr14 != '\n' && _chr14 != '\r', "USER_GCODE_14 cannot have a newline at the end. Please remove it.");
#endif
#ifdef USER_GCODE_15
constexpr char _chr15 = USER_GCODE_15[strlen(USER_GCODE_15) - 1];
static_assert(_chr15 != '\n' && _chr15 != '\r', "USER_GCODE_15 cannot have a newline at the end. Please remove it.");
#endif
#ifdef USER_GCODE_16
constexpr char _chr16 = USER_GCODE_16[strlen(USER_GCODE_16) - 1];
static_assert(_chr16 != '\n' && _chr16 != '\r', "USER_GCODE_16 cannot have a newline at the end. Please remove it.");
#endif
#ifdef USER_GCODE_17
constexpr char _chr17 = USER_GCODE_17[strlen(USER_GCODE_17) - 1];
static_assert(_chr17 != '\n' && _chr17 != '\r', "USER_GCODE_17 cannot have a newline at the end. Please remove it.");
#endif
#ifdef USER_GCODE_18
constexpr char _chr18 = USER_GCODE_18[strlen(USER_GCODE_18) - 1];
static_assert(_chr18 != '\n' && _chr18 != '\r', "USER_GCODE_18 cannot have a newline at the end. Please remove it.");
#endif
#ifdef USER_GCODE_19
constexpr char _chr19 = USER_GCODE_19[strlen(USER_GCODE_19) - 1];
static_assert(_chr19 != '\n' && _chr19 != '\r', "USER_GCODE_19 cannot have a newline at the end. Please remove it.");
#endif
#ifdef USER_GCODE_20
constexpr char _chr20 = USER_GCODE_20[strlen(USER_GCODE_20) - 1];
static_assert(_chr20 != '\n' && _chr20 != '\r', "USER_GCODE_20 cannot have a newline at the end. Please remove it.");
#endif
#ifdef USER_GCODE_21
constexpr char _chr21 = USER_GCODE_21[strlen(USER_GCODE_21) - 1];
static_assert(_chr21 != '\n' && _chr21 != '\r', "USER_GCODE_21 cannot have a newline at the end. Please remove it.");
#endif
#ifdef USER_GCODE_22
constexpr char _chr22 = USER_GCODE_22[strlen(USER_GCODE_22) - 1];
static_assert(_chr22 != '\n' && _chr22 != '\r', "USER_GCODE_22 cannot have a newline at the end. Please remove it.");
#endif
#ifdef USER_GCODE_23
constexpr char _chr23 = USER_GCODE_23[strlen(USER_GCODE_23) - 1];
static_assert(_chr23 != '\n' && _chr23 != '\r', "USER_GCODE_23 cannot have a newline at the end. Please remove it.");
#endif
#ifdef USER_GCODE_24
constexpr char _chr24 = USER_GCODE_24[strlen(USER_GCODE_24) - 1];
static_assert(_chr24 != '\n' && _chr24 != '\r', "USER_GCODE_24 cannot have a newline at the end. Please remove it.");
#endif
#ifdef USER_GCODE_25
constexpr char _chr25 = USER_GCODE_25[strlen(USER_GCODE_25) - 1];
static_assert(_chr25 != '\n' && _chr25 != '\r', "USER_GCODE_25 cannot have a newline at the end. Please remove it.");
#endif
Sanity check USER_GCODE formatting
2019-02-04 13:36:21 +01:00
#endif
Fix BACKLASH_COMPENSATION compiler issues (#15307)
2019-09-20 07:48:41 +02:00
#if ENABLED(BACKLASH_COMPENSATION)
#ifndef BACKLASH_DISTANCE_MM
Various Laser / Spindle improvements (#15335)
2020-04-03 02:31:08 +02:00
#error "BACKLASH_COMPENSATION requires BACKLASH_DISTANCE_MM."
Sanity-check CORE backlash axes (#17279) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-03-24 20:08:55 +01:00
#elif !defined(BACKLASH_CORRECTION)
Various Laser / Spindle improvements (#15335)
2020-04-03 02:31:08 +02:00
#error "BACKLASH_COMPENSATION requires BACKLASH_CORRECTION."
Sanity-check CORE backlash axes (#17279) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-03-24 20:08:55 +01:00
#elif IS_CORE
constexpr float backlash_arr[] = BACKLASH_DISTANCE_MM;
static_assert(!backlash_arr[CORE_AXIS_1] && !backlash_arr[CORE_AXIS_2],
"BACKLASH_COMPENSATION can only apply to " STRINGIFY(NORMAL_AXIS) " with your CORE system.");
Fix BACKLASH_COMPENSATION compiler issues (#15307)
2019-09-20 07:48:41 +02:00
#endif
M425 Backlash Correction (#11061)
2018-12-08 21:36:46 +01:00
#endif
Prusa MMU2 (#12967)
2019-02-01 02:10:52 +01:00
M166 Gradients, LCD Menu for 2-channel Mixer (Geeetech A10M/A20M) (#13022)
2019-02-10 11:54:23 +01:00
#if ENABLED(GRADIENT_MIX) && MIXING_VIRTUAL_TOOLS < 2
#error "GRADIENT_MIX requires 2 or more MIXING_VIRTUAL_TOOLS."
#endif
Add PHOTO_GCODE option, photo trigger physical move (#13168)
2019-02-14 22:09:35 +01:00
/**
* Photo G-code requirements
*/
#if ENABLED(PHOTO_GCODE)
Fix Photograph Pin Sanity Check (#15406)
2019-09-28 23:18:23 +02:00
#if (PIN_EXISTS(CHDK) + PIN_EXISTS(PHOTOGRAPH) + defined(PHOTO_SWITCH_POSITION)) > 1
Add PHOTO_GCODE option, photo trigger physical move (#13168)
2019-02-14 22:09:35 +01:00
#error "Please define only one of CHDK_PIN, PHOTOGRAPH_PIN, or PHOTO_SWITCH_POSITION."
#elif defined(PHOTO_SWITCH_POSITION) && !defined(PHOTO_POSITION)
#error "PHOTO_SWITCH_POSITION requires PHOTO_POSITION. Please update your Configuration_adv.h."
#elif PIN_EXISTS(CHDK) && defined(CHDK_DELAY)
#error "CHDK_DELAY has been replaced by PHOTO_SWITCH_MS. Please update your Configuration_adv.h."
#elif PIN_EXISTS(CHDK) && !defined(PHOTO_SWITCH_MS)
#error "PHOTO_SWITCH_MS is required with CHDK_PIN. Please update your Configuration_adv.h."
#elif defined(PHOTO_RETRACT_MM)
static_assert(PHOTO_RETRACT_MM + 0 >= 0, "PHOTO_RETRACT_MM must be >= 0.");
#endif
#endif
Prusa MMU2 (#12967)
2019-02-01 02:10:52 +01:00
/**
* Prusa MMU2 requirements
*/
#if ENABLED(PRUSA_MMU2)
MMU2 Extruder Sensor support (#17886)
2020-05-17 21:52:45 +02:00
#if EXTRUDERS != 5
Prusa MMU2 (#12967)
2019-02-01 02:10:52 +01:00
#error "PRUSA_MMU2 requires EXTRUDERS = 5."
MMU2 Extruder Sensor support (#17886)
2020-05-17 21:52:45 +02:00
#elif DISABLED(NOZZLE_PARK_FEATURE)
#error "PRUSA_MMU2 requires NOZZLE_PARK_FEATURE. Enable it to continue."
#elif EITHER(PRUSA_MMU2_S_MODE, MMU_EXTRUDER_SENSOR) && DISABLED(FILAMENT_RUNOUT_SENSOR)
#error "PRUSA_MMU2_S_MODE or MMU_EXTRUDER_SENSOR requires FILAMENT_RUNOUT_SENSOR. Enable it to continue."
#elif BOTH(PRUSA_MMU2_S_MODE, MMU_EXTRUDER_SENSOR)
#error "Enable only one of PRUSA_MMU2_S_MODE or MMU_EXTRUDER_SENSOR."
Prusa MMU2 (#12967)
2019-02-01 02:10:52 +01:00
#elif DISABLED(ADVANCED_PAUSE_FEATURE)
Use C++ language supported 'nullptr' (#13944)
2019-05-09 18:45:55 +02:00
static_assert(nullptr == strstr(MMU2_FILAMENT_RUNOUT_SCRIPT, "M600"), "ADVANCED_PAUSE_FEATURE is required to use M600 with PRUSA_MMU2.");
Prusa MMU2 (#12967)
2019-02-01 02:10:52 +01:00
#endif
#endif
Service interval watchdog (#13105)
2019-02-12 22:58:56 +01:00
/**
* Advanced PRINTCOUNTER settings
*/
#if ENABLED(PRINTCOUNTER)
#if defined(SERVICE_INTERVAL_1) != defined(SERVICE_NAME_1)
#error "Both SERVICE_NAME_1 and SERVICE_INTERVAL_1 are required."
#elif defined(SERVICE_INTERVAL_2) != defined(SERVICE_NAME_2)
#error "Both SERVICE_NAME_2 and SERVICE_INTERVAL_2 are required."
#elif defined(SERVICE_INTERVAL_3) != defined(SERVICE_NAME_3)
#error "Both SERVICE_NAME_3 and SERVICE_INTERVAL_3 are required."
#endif
#endif
Fix and improve software endstops (#13386)
2019-03-13 11:48:36 +01:00
/**
* Require soft endstops for certain setups
*/
Park heads with electromagnet (#14023)
2019-07-01 12:55:23 +02:00
#if !BOTH(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
Fix and improve software endstops (#13386)
2019-03-13 11:48:36 +01:00
#if ENABLED(DUAL_X_CARRIAGE)
#error "DUAL_X_CARRIAGE requires both MIN_ and MAX_SOFTWARE_ENDSTOPS."
#elif HAS_HOTEND_OFFSET
#error "MIN_ and MAX_SOFTWARE_ENDSTOPS are both required with offset hotends."
#endif
#endif
Singleton for cutting tools (#14429)
2019-06-28 06:06:49 +02:00
Simplify power supply naming logic (#14488) Co-Authored-By: Tim Moore <tim.moore@lightbend.com> Co-Authored-By: AnHardt <github@kitelab.de>
2019-07-05 08:58:34 +02:00
/**
* Ensure this option is set intentionally
*/
Fix up PSU_CONTROL checks
2019-10-22 22:43:37 +02:00
#if ENABLED(PSU_CONTROL)
#ifndef PSU_ACTIVE_HIGH
#error "PSU_CONTROL requires PSU_ACTIVE_HIGH to be defined as 'true' or 'false'."
#elif !PIN_EXISTS(PS_ON)
#error "PSU_CONTROL requires PS_ON_PIN."
#endif
#elif ENABLED(AUTO_POWER_CONTROL)
#error "AUTO_POWER_CONTROL requires PSU_CONTROL."
Simplify power supply naming logic (#14488) Co-Authored-By: Tim Moore <tim.moore@lightbend.com> Co-Authored-By: AnHardt <github@kitelab.de>
2019-07-05 08:58:34 +02:00
#endif
Singleton for cutting tools (#14429)
2019-06-28 06:06:49 +02:00
#if HAS_CUTTER
Improvements for Laser / Spindle (#17661)
2020-06-08 07:47:31 +02:00
#ifndef CUTTER_POWER_UNIT
#error "CUTTER_POWER_UNIT is required with a spindle or laser. Please update your Configuration_adv.h."
#elif !CUTTER_UNIT_IS(PWM255) && !CUTTER_UNIT_IS(PERCENT) && !CUTTER_UNIT_IS(RPM)
#error "CUTTER_POWER_UNIT must be PWM255, PERCENT, or RPM. Please update your Configuration_adv.h."
Various Laser / Spindle improvements (#15335)
2020-04-03 02:31:08 +02:00
#endif
#if ENABLED(LASER_POWER_INLINE)
#if ENABLED(SPINDLE_CHANGE_DIR)
#error "SPINDLE_CHANGE_DIR and LASER_POWER_INLINE are incompatible."
#elif ENABLED(LASER_MOVE_G0_OFF) && DISABLED(LASER_MOVE_POWER)
#error "LASER_MOVE_G0_OFF requires LASER_MOVE_POWER. Please update your Configuration_adv.h."
#endif
#if ENABLED(LASER_POWER_INLINE_TRAPEZOID)
#if DISABLED(SPINDLE_LASER_PWM)
#error "LASER_POWER_INLINE_TRAPEZOID requires SPINDLE_LASER_PWM to function."
#elif ENABLED(S_CURVE_ACCELERATION)
//#ifndef LASER_POWER_INLINE_S_CURVE_ACCELERATION_WARN
// #define LASER_POWER_INLINE_S_CURVE_ACCELERATION_WARN
// #warning "Combining LASER_POWER_INLINE_TRAPEZOID with S_CURVE_ACCELERATION may result in unintended behavior."
//#endif
#endif
#endif
#if ENABLED(LASER_POWER_INLINE_INVERT)
//#ifndef LASER_POWER_INLINE_INVERT_WARN
// #define LASER_POWER_INLINE_INVERT_WARN
// #warning "Enabling LASER_POWER_INLINE_INVERT means that `M5` won't kill the laser immediately; use `M5 I` instead."
//#endif
#endif
#else
#if SPINDLE_LASER_POWERUP_DELAY < 1
#error "SPINDLE_LASER_POWERUP_DELAY must be greater than 0."
#elif SPINDLE_LASER_POWERDOWN_DELAY < 1
#error "SPINDLE_LASER_POWERDOWN_DELAY must be greater than 0."
#elif ENABLED(LASER_MOVE_POWER)
#error "LASER_MOVE_POWER requires LASER_POWER_INLINE."
#elif ANY(LASER_POWER_INLINE_TRAPEZOID, LASER_POWER_INLINE_INVERT, LASER_MOVE_G0_OFF, LASER_MOVE_POWER)
#error "Enabled an inline laser feature without inline laser power being enabled."
#endif
#endif
Singleton for cutting tools (#14429)
2019-06-28 06:06:49 +02:00
#define _PIN_CONFLICT(P) (PIN_EXISTS(P) && P##_PIN == SPINDLE_LASER_PWM_PIN)
#if BOTH(SPINDLE_FEATURE, LASER_FEATURE)
#error "Enable only one of SPINDLE_FEATURE or LASER_FEATURE."
#elif !PIN_EXISTS(SPINDLE_LASER_ENA)
#error "(SPINDLE|LASER)_FEATURE requires SPINDLE_LASER_ENA_PIN."
#elif ENABLED(SPINDLE_CHANGE_DIR) && !PIN_EXISTS(SPINDLE_DIR)
#error "SPINDLE_DIR_PIN is required for SPINDLE_CHANGE_DIR."
#elif ENABLED(SPINDLE_LASER_PWM)
#if !defined(SPINDLE_LASER_PWM_PIN) || SPINDLE_LASER_PWM_PIN < 0
#error "SPINDLE_LASER_PWM_PIN is required for SPINDLE_LASER_PWM."
#elif !PWM_PIN(SPINDLE_LASER_PWM_PIN)
#error "SPINDLE_LASER_PWM_PIN not assigned to a PWM pin."
#elif !defined(SPINDLE_LASER_PWM_INVERT)
#error "SPINDLE_LASER_PWM_INVERT is required for (SPINDLE|LASER)_FEATURE."
Improvements for Laser / Spindle (#17661)
2020-06-08 07:47:31 +02:00
#elif !(defined(SPEED_POWER_INTERCEPT) && defined(SPEED_POWER_MIN) && defined(SPEED_POWER_MAX) && defined(SPEED_POWER_STARTUP))
Singleton for cutting tools (#14429)
2019-06-28 06:06:49 +02:00
#error "SPINDLE_LASER_PWM equation constant(s) missing."
#elif _PIN_CONFLICT(X_MIN)
#error "SPINDLE_LASER_PWM pin conflicts with X_MIN_PIN."
#elif _PIN_CONFLICT(X_MAX)
#error "SPINDLE_LASER_PWM pin conflicts with X_MAX_PIN."
#elif _PIN_CONFLICT(Z_STEP)
#error "SPINDLE_LASER_PWM pin conflicts with Z_STEP_PIN."
#elif _PIN_CONFLICT(CASE_LIGHT)
#error "SPINDLE_LASER_PWM_PIN conflicts with CASE_LIGHT_PIN."
#elif _PIN_CONFLICT(E0_AUTO_FAN)
#error "SPINDLE_LASER_PWM_PIN conflicts with E0_AUTO_FAN_PIN."
#elif _PIN_CONFLICT(E1_AUTO_FAN)
#error "SPINDLE_LASER_PWM_PIN conflicts with E1_AUTO_FAN_PIN."
#elif _PIN_CONFLICT(E2_AUTO_FAN)
#error "SPINDLE_LASER_PWM_PIN conflicts with E2_AUTO_FAN_PIN."
#elif _PIN_CONFLICT(E3_AUTO_FAN)
#error "SPINDLE_LASER_PWM_PIN conflicts with E3_AUTO_FAN_PIN."
#elif _PIN_CONFLICT(E4_AUTO_FAN)
#error "SPINDLE_LASER_PWM_PIN conflicts with E4_AUTO_FAN_PIN."
#elif _PIN_CONFLICT(E5_AUTO_FAN)
#error "SPINDLE_LASER_PWM_PIN conflicts with E5_AUTO_FAN_PIN."
BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (#16595)
2020-01-25 09:13:39 +01:00
#elif _PIN_CONFLICT(E6_AUTO_FAN)
#error "SPINDLE_LASER_PWM_PIN conflicts with E6_AUTO_FAN_PIN."
#elif _PIN_CONFLICT(E7_AUTO_FAN)
#error "SPINDLE_LASER_PWM_PIN conflicts with E7_AUTO_FAN_PIN."
Singleton for cutting tools (#14429)
2019-06-28 06:06:49 +02:00
#elif _PIN_CONFLICT(FAN)
#error "SPINDLE_LASER_PWM_PIN conflicts with FAN_PIN."
#elif _PIN_CONFLICT(FAN1)
#error "SPINDLE_LASER_PWM_PIN conflicts with FAN1_PIN."
#elif _PIN_CONFLICT(FAN2)
#error "SPINDLE_LASER_PWM_PIN conflicts with FAN2_PIN."
BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (#16595)
2020-01-25 09:13:39 +01:00
#elif _PIN_CONFLICT(FAN3)
#error "SPINDLE_LASER_PWM_PIN conflicts with FAN3_PIN."
#elif _PIN_CONFLICT(FAN4)
#error "SPINDLE_LASER_PWM_PIN conflicts with FAN4_PIN."
#elif _PIN_CONFLICT(FAN5)
#error "SPINDLE_LASER_PWM_PIN conflicts with FAN5_PIN."
#elif _PIN_CONFLICT(FAN6)
#error "SPINDLE_LASER_PWM_PIN conflicts with FAN6_PIN."
#elif _PIN_CONFLICT(FAN7)
#error "SPINDLE_LASER_PWM_PIN conflicts with FAN7_PIN."
Singleton for cutting tools (#14429)
2019-06-28 06:06:49 +02:00
#elif _PIN_CONFLICT(CONTROLLERFAN)
#error "SPINDLE_LASER_PWM_PIN conflicts with CONTROLLERFAN_PIN."
#elif _PIN_CONFLICT(MOTOR_CURRENT_PWM_XY)
#error "SPINDLE_LASER_PWM_PIN conflicts with MOTOR_CURRENT_PWM_XY."
#elif _PIN_CONFLICT(MOTOR_CURRENT_PWM_Z)
#error "SPINDLE_LASER_PWM_PIN conflicts with MOTOR_CURRENT_PWM_Z."
#elif _PIN_CONFLICT(MOTOR_CURRENT_PWM_E)
#error "SPINDLE_LASER_PWM_PIN conflicts with MOTOR_CURRENT_PWM_E."
#endif
#endif
#undef _PIN_CONFLICT
#endif
Estimate Remaining Time (graphical display) (#15497)
2019-10-11 04:03:33 +02:00
#if !HAS_GRAPHICAL_LCD
#if ENABLED(PRINT_PROGRESS_SHOW_DECIMALS)
#error "PRINT_PROGRESS_SHOW_DECIMALS currently requires a Graphical LCD."
#elif ENABLED(SHOW_REMAINING_TIME)
#error "SHOW_REMAINING_TIME currently requires a Graphical LCD."
#endif
#endif
Adjustable ADC debounce delay (#16264)
2020-01-16 01:06:03 +01:00
Allow larger ADC debounce Reference #17205
2020-06-27 01:53:39 +02:00
#if HAS_ADC_BUTTONS && defined(ADC_BUTTON_DEBOUNCE_DELAY) && ADC_BUTTON_DEBOUNCE_DELAY < 16
#error "ADC_BUTTON_DEBOUNCE_DELAY must be greater than 16."
Adjustable ADC debounce delay (#16264)
2020-01-16 01:06:03 +01:00
#endif
Shared SPI sanity check (#16581)
2020-01-16 01:49:15 +01:00
/**
* Check to make sure MONITOR_DRIVER_STATUS isn't enabled
* on boards where TMC drivers share the SPI bus with SD.
*/
Coolstep for TMC2130, 2209, 5130, 5160 (#16790)
2020-02-09 04:01:57 +01:00
#if HAS_TMC_SPI && ALL(MONITOR_DRIVER_STATUS, SDSUPPORT, USES_SHARED_SPI)
Shared SPI sanity check (#16581)
2020-01-16 01:49:15 +01:00
#error "MONITOR_DRIVER_STATUS and SDSUPPORT cannot be used together on boards with shared SPI."
#endif
Catch more LPC1768 pin conflicts (#17019)
2020-02-29 11:14:40 +01:00
// G60/G61 Position Save
#if SAVED_POSITIONS > 256
#error "SAVED_POSITIONS must be an integer from 0 to 256."
#endif
G6 Direct Stepping (#17853)
2020-05-12 02:22:41 +02:00
/**
* Sanity checks for stepper chunk support
*/
#if ENABLED(DIRECT_STEPPING)
#if ENABLED(LIN_ADVANCE)
#error "DIRECT_STEPPING is incompatible with LIN_ADVANCE. Enable in external planner if possible."
#endif
#endif
Reference in a new issue Copy permalink