Scott Lahteine
cf6f483378
Merge pull request #6187 from thinkyhead/rc_flsun_delta_autocal
...
Delta: DELTA_HEIGHT, G33 Auto-Calibrate, drop M206/M428, add M665 H
2017-04-14 22:32:12 -05:00
Scott Lahteine
24882adfbf
Allow NO_WORKSPACE_OFFSETS with DELTA_AUTO_CALIBRATION
...
- On `DELTA` the `M665 H` option supplants `M206`
- On `DELTA` `NO_WORKSPACE_OFFSETS` only reverts `G92` behavior
- Spawn 4 conditionals based on `NO_WORKSPACE_OFFSETS`
- Optimize coordinate space conversion for `DELTA` workspace
- To keep EEPROM version, retain `home_offset[XYZ]`, just ignore XY
2017-04-14 21:56:49 -05:00
Bob-the-Kuhn
1acb84ba02
fix 1 bug, add error messages
...
===============================================
make changes requested by reviewers
===============================================
add M43 test to Travis, fix EOL, remove trailing spaces
2017-04-14 20:57:45 -05:00
LVD-AC
8821963873
Implement delta auto-calibration and delta_height
2017-04-14 19:46:31 -05:00
Scott Lahteine
b305699046
Merge pull request #6341 from benlye/benlye-lcd_babystep_zoffset
...
Fix lcd_babystep_zoffset()
2017-04-14 19:11:46 -05:00
LVD-AC
03bda24d19
Add delta auto-calibration and configuration for Flsun AC
2017-04-14 19:08:14 -05:00
Scott Lahteine
1bd25fd2b3
Clean up config spacing, section headings, etc.
2017-04-14 19:06:31 -05:00
Scott Lahteine
153b0ae967
Tweak Delta Printer configuration note
2017-04-14 19:06:06 -05:00
Scott Lahteine
81ffd98dd9
Allow faux leveling
2017-04-14 19:06:06 -05:00
Scott Lahteine
2355d87e11
Merge pull request #6346 from thinkyhead/rc_broken_abl_test
...
Add support for SOLENOID_PROBE
2017-04-14 18:36:32 -05:00
Scott Lahteine
f4685c28b7
Reorder Conditionals_post.h and add comments
2017-04-14 18:18:21 -05:00
Scott Lahteine
0ac2b5c045
Additional 5 extruders support (solenoids, microstepping)
2017-04-14 18:18:20 -05:00
Scott Lahteine
fd2a0784ba
Add support for SOLENOID_PROBE
2017-04-14 17:24:36 -05:00
Scott Lahteine
5803ba43a9
Expose EXT_SOLENOID as an advanced option
2017-04-14 17:24:36 -05:00
Scott Lahteine
ea734f910b
Use direct pin manipulation whenever possible
2017-04-14 16:55:35 -05:00
Scott Lahteine
19d0c6a0c0
Patch to init W with RGBW_LED
2017-04-14 16:55:23 -05:00
Scott Lahteine
3e079660b0
Never define SLED_PIN
2017-04-14 16:36:32 -05:00
benlye
1a447d0047
Fix variant conditional for 1284p
2017-04-14 18:46:09 +01:00
benlye
1f9ee42750
Fix lcd_babystep_zoffset()
...
Resolve 'steps_to_mm was not declared in this scope' compilation error after recent changes to merge babystepping with M851
2017-04-14 18:38:35 +01:00
Bob-the-Kuhn
445d39e95a
CORExx endstop detection fixes
...
1. The CORExx printers were checking more endstop axis than needed.
2. Removed all the CORE_xx_NOT logic. The motor_direction(xx) routine
always returns the correct data so it is not needed. It was actually
cause the wrong direction to be checked in some cases.
3. Made the logic/defines for X, Y & Z axis all the same. The old logic
checked inappropriate configurations for Y and didn't check all the
correct configurations on Z.
4. Added a check for zero steps before the X, Y & Z axis. Previously
would check the they axis even if there were no movement.
2017-04-13 21:43:37 -05:00
Roxy-3D
28fec61f92
M100 Fixes and Features
...
All the memory accesses need to be unsigned char in order to avoid
false errors being detected. Two new features are available for
developers to call into the M100 functionality to look for data
corruption.
2017-04-13 18:20:53 -05:00
Scott Lahteine
52c3ace102
Add BABYSTEP_ZPROBE_OFFSET as an optional feature
2017-04-13 16:29:43 -05:00
Scott Lahteine
cd4e6abec8
Group BABYSTEPPING options together
2017-04-13 16:26:45 -05:00
Scott Lahteine
60ac41a32c
Add code to handle changes to zprobe_zoffset
2017-04-13 15:46:35 -05:00
Scott Lahteine
8fa4209916
Movement/adjustment should be reverse of probe offset change
2017-04-13 15:46:05 -05:00
Thomas Moore
361655828f
Use babystepping to adjust bed probe z-offset
2017-04-13 15:46:05 -05:00
Scott Lahteine
36e5c7c389
Merge pull request #6330 from thinkyhead/rc_improvements
...
Sanity check per-axis options' array sizes
2017-04-13 13:08:44 -05:00
Scott Lahteine
02fca543bb
Merge pull request #6272 from thinkyhead/rc_adc_variable_rate
...
Make ADC sensor reading frequency adjustable
2017-04-13 12:49:31 -05:00
Scott Lahteine
34308368c0
Sanity check per-axis settings for size
2017-04-13 11:35:20 -05:00
Scott Lahteine
ac96ae89f9
Apply const
in Stepper::isr
2017-04-13 06:20:36 -05:00
Scott Lahteine
2fa1e882d0
Merge pull request #6325 from thinkyhead/rc_M20_with_size
...
Simplified M20 with size
2017-04-13 05:06:52 -05:00
Bob-the-Kuhn
1b12fea0fa
simplified M20 with size
2017-04-13 04:56:58 -05:00
Scott Lahteine
4022b971db
Merge pull request #6315 from thinkyhead/rc_unify_M421
...
Unify M421
2017-04-12 19:43:28 -05:00
Scott Lahteine
b236562354
Merge pull request #6306 from thinkyhead/cleanup_after_6302
...
Adjustments to M100
2017-04-12 19:12:27 -05:00
Scott Lahteine
5e4f4d387f
Swap MBL z_values dimensions to [X][Y]
2017-04-12 17:24:05 -05:00
Scott Lahteine
063f641651
Unify M421
2017-04-11 15:46:13 -05:00
Scott Lahteine
6d5400dc31
Merge pull request #6240 from thinkyhead/rebuild_rgb_led
...
Extend RGB LED with Printer Events
2017-04-11 15:16:57 -05:00
Scott Lahteine
dac21ec680
Add support for an RGBW LED
2017-04-11 12:58:55 -05:00
Scott Lahteine
e7746ffee4
Extend RGB LED support, adding Printer Events
2017-04-11 12:15:41 -05:00
Scott Lahteine
c7063eb55c
theTarget => target_temp
2017-04-11 12:15:41 -05:00
Scott Lahteine
36bda2bade
Add HAS_RESUME_CONTINUE shorthand macro
2017-04-11 12:15:40 -05:00
Scott Lahteine
53e6c33c37
2 is DXC_DUPLICATION_MODE
2017-04-11 12:15:40 -05:00
Scott Lahteine
a2cb0a3d54
Use multiply for delta probe constraint
2017-04-11 12:15:40 -05:00
Scott Lahteine
6487c96a4a
Merge pull request #6313 from Kaibob2/patch-10
...
Allow 10mm Movements for Z-Axis
2017-04-11 12:04:10 -05:00
Kai
001bc14255
Allow 10mm Movements for Z-Axis
...
I use the movement options via LCD quite often. Especially to get the nozzle out of the way. I see no reason, why the 10mm option is disabled for the Z-Axis, this is why i always delete this line when i compile a new version.
If this is unwanted, please just close this PR
2017-04-11 18:39:26 +02:00
Scott Lahteine
6a9b008044
Fix MINIMUM_STEPPER_PULSE maths
2017-04-11 11:11:17 -05:00
Scott Lahteine
68773f4486
Simplify stepper macros by renaming enable/disable macros
2017-04-11 11:10:26 -05:00
Scott Lahteine
e02a5a6371
Add macros for delays by machine cycle
2017-04-11 09:18:32 -05:00
Scott Lahteine
ecc537015a
Have M109 / M190 do nothing with no parameters
2017-04-11 05:06:25 -05:00
Scott Lahteine
03aa9a390e
Apply coding standards to M100, break up into functions
2017-04-10 21:09:43 -05:00
Scott Lahteine
48c16fc6ef
Merge pull request #6307 from thinkyhead/rc_less_no_reentrance
...
Only lcd_synchronize needs no_reentry
2017-04-10 20:58:32 -05:00
Scott Lahteine
4fcfe926d6
Only lcd_synchronize needs no_reentry
2017-04-10 20:13:23 -05:00
Scott Lahteine
67fb7f82ac
Merge pull request #6283 from thinkyhead/rc_eeprom_z_fade
...
Save / restore z_fade_height in EEPROM
2017-04-10 20:05:20 -05:00
Scott Lahteine
eff5af569b
Merge pull request #6300 from MagoKimbra/rc_fix_mesh_report
...
Fix mbl_mesh_report
2017-04-10 19:37:19 -05:00
Scott Lahteine
4a18968c10
Merge pull request #6297 from Kaibob2/patch-9
...
Fix EPROM -> EEPROM
2017-04-10 19:35:30 -05:00
Roxy-3D
ba85faabc0
Fix M100 Free Memory Checker
...
M100 had numerious changes and quit working. Part of the problem is
the overloading of the SERIAL_PROTOCOL functions. Also, some of the
address arithmatic was changed to use char *ptr and passing ptr into the
SERIAL_PROTOCOL functions caused them to try to print a string instead
of a number. M100 is working again. Let's keep it that way!
M100 has been expanded to now have a function int
free_memory_is_corrupted() that can be called from other code to see if
the free space is still contiguous. It may make sense to add a flag to
control its verbose nature but right now, the extra chit chat is very
helpful to know int free_memory_is_corrupted() is doing the right thing
and what it found at various points when it was called. A 'Show &
Tell' is coming up with int free_memory_is_corrupted().
2017-04-10 15:33:55 -05:00
Kai
3b82db5fe9
Missing semicolon in ultralcd.cpp
...
When PARK_HEAD_ON_PAUSE is defined Marlin won't compile because of two missing semicolon.
2017-04-10 14:45:51 -05:00
MagoKimbra
7d2e637867
Fix mbl_mesh_report
2017-04-10 20:50:19 +02:00
Kai
afeb0452ef
Fix EPROM -> EEPROM
...
These fixes are neede because before it showed the englisch text even if language = de was selected
2017-04-10 18:37:00 +02:00
Scott Lahteine
7f950a80c0
Make ADC sensor reading frequency adjustable
2017-04-09 22:18:21 -05:00
Scott Lahteine
786af73e24
Convert config code to a static class
2017-04-09 22:06:41 -05:00
james94jeans2
5b9476fe78
Added z_fade_height to EEPROM-Settings
...
Firmware was forgetting the z_fade_height in Planner, set by M420 Z<f>,
after each reset or loading settings from EEPROM. Added the float
z_fade_height to EEPROM-Storage, now remembers the value.
2017-04-09 21:16:58 -05:00
Scott Lahteine
9343f6a95f
Put TOSHIBA with other stepper driver options
2017-04-09 20:52:49 -05:00
Scott Lahteine
7a704af5e6
Merge pull request #6284 from thinkyhead/rc_wt150_rebase
...
wt150 (Mightyboard Rev E) & RRD Full Graphic Smart Controller
2017-04-09 20:27:44 -05:00
Max Matveev
2031fb913b
Fixed comparison of float values to NaN
2017-04-09 20:28:46 +02:00
Scott Lahteine
e48a52a530
Patch a display issue with LCD_DECIMAL_SMALL_XY
...
The `ftostr4sign` function got munged by the `WITHIN` patch
2017-04-09 10:25:35 -05:00
Scott Lahteine
1a3cd6a090
Merge pull request #6213 from thinkyhead/rc_gitattributes
...
Init bed_level_virt_interpolate on EEPROM load
2017-04-09 08:13:11 -05:00
Scott Lahteine
314a02e2d5
Toggle with XOR
2017-04-09 07:58:47 -05:00
Scott Lahteine
8bc0d90b00
Init bed_level_virt_interpolate on EEPROM load
2017-04-09 07:04:20 -05:00
MD
20dd5376b8
Cheaptronic V2
...
Add support for new electronics
www.reprapobchod.cz
2017-04-09 06:57:43 -05:00
Scott Lahteine
4cdda5615b
Bring other configs up to date with wt150 changes
2017-04-09 06:45:42 -05:00
Paweł Stawicki
9b0885f4f6
Allow boards without a thermistor
2017-04-09 06:45:41 -05:00
Paweł Stawicki
64cfcebe66
Update SlowSoftI2CMaster link. MightyBoard digipots I2C bus has no resistors.
2017-04-09 06:45:03 -05:00
Paweł Stawicki
0eb16d9ff7
Add example config for the wt150 printer with RepRapDiscount Full Graphic Smart Controller
2017-04-09 06:44:54 -05:00
Paweł Stawicki
652bedfa18
Add RepRapDiscount Full Graphic Smart Controller support to MIGHTYBOARD REVE
2017-04-09 06:44:53 -05:00
Paweł Stawicki
44cdebb8f1
Add software spi support for max6675
2017-04-09 06:44:53 -05:00
Paweł Stawicki
191fec009f
Add digipot i2c control for MCP4018
2017-04-09 06:44:53 -05:00
Scott Lahteine
e5b16081cb
Update TinyBoy2 configurations
2017-04-09 06:44:53 -05:00
Scott Lahteine
1855534f20
Config files cleanup
2017-04-09 06:44:52 -05:00
Scott Lahteine
c26a315d0b
Additional missed patches
2017-04-09 04:24:23 -05:00
Scott Lahteine
39617e10b8
Patch configs comment formatting
2017-04-09 03:49:16 -05:00
Scott Lahteine
c54f6cf23d
Updates to support 5 extruders
2017-04-09 03:49:16 -05:00
Scott Lahteine
2b88ccd0aa
Apply UBL mesh bounds to remaining configs
2017-04-09 03:49:15 -05:00
Scott Lahteine
60be3d264b
Macros to print floats, hiding imprecision
2017-04-09 03:48:40 -05:00
Scott Lahteine
b356d73239
Merge pull request #6278 from thinkyhead/pr_delta_angles
...
Followup to additional delta trim options
2017-04-08 22:25:57 -05:00
Jimmy Envall
f78d44e91a
Added support for delta tower angle corrections.
2017-04-08 21:13:44 -05:00
Scott Lahteine
d3b4d84586
Merge pull request #6277 from thinkyhead/pr_roxy3d_rcbugfix
...
Unify UBL Command Parsing
2017-04-08 20:17:46 -05:00
Scott Lahteine
d4ce839351
Cleanup following Pins Debug update
2017-04-08 18:59:57 -05:00
Scott Lahteine
c7a8f7970b
Formatting / cleanup
2017-04-08 18:59:57 -05:00
Scott Lahteine
29d4ec8257
Support 5 extruder auto fans
2017-04-08 18:59:57 -05:00
Scott Lahteine
824f3c1c0d
Fix up configuration comments
2017-04-08 18:59:56 -05:00
Scott Lahteine
995ed90248
Clean up Filament Width Sensor comments
2017-04-08 18:59:56 -05:00
Scott Lahteine
5a7b810fdd
General comment cleanup
2017-04-08 18:58:33 -05:00
Scott Lahteine
0027c22839
Drop extraneous calls to lcd_update
2017-04-08 18:58:33 -05:00
Scott Lahteine
d6db7a9b03
patch "step_remaining"
2017-04-08 18:13:20 -05:00
Scott Lahteine
cbc2331187
Use LCD_MESSAGEPGM over lcd_setstatuspgm
2017-04-08 18:04:39 -05:00
Scott Lahteine
3729510b1e
Set and check main parameter values, report all errors
2017-04-08 17:15:55 -05:00
Roxy-3D
34d3ed9ab1
These items were removed from the UBL Command Parsing
...
Having these items randomly (and errorniously) disappear cost me several
hours of work yesterday.
2017-04-08 15:30:20 -05:00
Scott Lahteine
15edb41cee
Patches to UBL
2017-04-08 14:59:14 -05:00
Roxy-3D
14cf527bb8
Getting setup for debugging
2017-04-08 14:59:14 -05:00
Scott Lahteine
f8408036f2
Merge pull request #6264 from thinkyhead/rc_five_extruders
...
Support up to 5 extruders in Marlin
2017-04-07 12:48:56 -05:00
Bob-the-Kuhn
f7fc49c3a3
Finish name change
...
DAC_STEPPER_DFLT wasn't changed to DAC_MOTOR_CURRENT_DEFAULT in all
places on PR #6124
2017-04-07 11:05:24 -05:00
Scott Lahteine
832064e4f2
Implementation changes to support 5 extruders
2017-04-07 10:46:37 -05:00
Scott Lahteine
04050237f0
Header and pins changes to support 5 extruders
2017-04-07 10:46:36 -05:00
Scott Lahteine
2a84122edd
Configuration changes to support 5 extruders
2017-04-07 10:46:35 -05:00
Scott Lahteine
edf18977c1
Patch pins files hotends/e-steppers sanity check
2017-04-07 10:46:33 -05:00
Scott Lahteine
dc84678fc1
Fix HOTEND_STATUS_ITEM for graphical display
2017-04-06 23:07:30 -05:00
Scott Lahteine
a0de5d94e2
Merge pull request #6258 from benlye/benlye-bilinearfix2
...
Better fix for bilinear Z offset and G29 Z (update to #6251 )
2017-04-06 20:51:57 -05:00
Scott Lahteine
b23aef5b8d
Merge pull request #6190 from Bob-the-Kuhn/Stop-and-Kill-prints---round-2
...
Message for every KILL and STOP (also need delays)
2017-04-06 20:40:12 -05:00
Roxy-3D
945303c0d5
eleminate bootscreen.h
2017-04-06 19:55:41 -05:00
Roxy-3D
ef3da3971e
Update ubl.h
2017-04-06 19:55:41 -05:00
Roxy-3D
8644dc170b
get synchronized to current file names
2017-04-06 19:55:41 -05:00
Roxy-3D
1451b7eacf
UBL's Grid Based Leveling code
...
Pretty much... The code is in place. Still more work to do. But it
has a lot of hooks and variables in other code, so commit and merge
before I pick up a million 'Conflicts'.
2017-04-06 19:55:41 -05:00
Bob-the-Kuhn
549055f20c
Merge pull request #6124 from Bob-the-Kuhn/MCP4728-consistency
...
MCP4728 consistency & fix ultralcd.cpp (PRINTRBOARD Rev F and RIGIDBOARD V2)
2017-04-06 16:35:50 -05:00
Bob-the-Kuhn
a77875c9d2
Merge pull request #6114 from Bob-the-Kuhn/try2-add-BLTouch-retry
...
Another BLTouch retry place (replaces PR #6108 )
2017-04-06 16:25:55 -05:00
Bob-the-Kuhn
3b9ff2cb12
Merge pull request #5676 from Bob-the-Kuhn/configuration.h
...
Configuration.h - reword Z PROBE section
2017-04-06 16:18:34 -05:00
Bob-the-Kuhn
6643d553f6
# This is a combination of 2 commits.
...
# This is the 1st commit message:
MCP4728 consistency & fix ultralcd.cpp
The MCP4728 DAC controls the stepper motor current strenth on the
PRINTRBOARD Rev F and RIGIDBOARD V2 boards.
PR #5792 on 9 FEB 2017 implemented default drive percentages but only on
the RIGIDBOARD V2.
This change moves the default settings to Configuration_adv.h.
Also, ultralcd.cpp won't compile because of a type def conflict.
Changed it to match the one in stepper_dac.cpp
===========================================================
reword stepper curent section for clarity
===========================================================
change name & improve comments
===========================================================
changed name from A4JP to SCOOVO_X9H per PR #6139
# This is the commit message #2 :
fix typo
2017-04-06 16:16:27 -05:00
Bob-the-Kuhn
a44b3432c1
add BLTouch retry to a second place & add/update delays
...
=================================================
implement requested changes
=================================================
remove delays (they're in another PR) & move return
2017-04-06 16:13:07 -05:00
Bob-the-Kuhn
a5abc61fb9
Merge pull request #6219 from Bob-the-Kuhn/Servo-probe-and-toggle-pins
...
M43 - add Toggle utility and Z servo utility (replaces PR #5864 )
2017-04-06 16:10:50 -05:00
Bob-the-Kuhn
3b8926bd09
improved wording, consolidation of info, BLTouch warning
...
==============================================
clarified BLTouch calculation & changed comment delimitters/flags
I found it hard to pickout the various sections in this area so I
changed most comments from // style to /** ... */
Made the BLTouch calculation simpler and clarified the units of measure
for the result.
============================================
add changes to example configurations
============================================
add TinyBoy2 to this PR & add BLTouch Delay
2017-04-06 16:06:01 -05:00
Scott Lahteine
55d296aaf0
pinsDebug with more features, uses less RAM
...
I've just uploaded a major change to pinsDebug.
The big change was creating an array in FLASH that contained every
active pin definition. That reduced the RAM memory usage considerably
but increased the FLASH usage.
Creating the array requires going through the pin list twice. Rather
than having two copies of it in the code I moved the list out to another
file (pinsDebug_list.h) and then just did two #includes.
From the user’s view they’ll see the following changes:
1. Now reports all the names assigned to a pin
2. The port is now reported in addition to the pin number.
3. When PWM0A & PWM1C share a pin, both PWMs are reported
4. More PWM/Timer info is reported
One new item that may cause some concern is the usage of the LINE
predefined preprocessor macro. It may not be available if the Arduino
IDE goes to a different compiler.
Includes support for 1284 & 1286 families.
Memory usage changes when enabling PINS_DEBUGGING:
ATmega2560
FLASH
. without 52576
. with new 64592
. with old 62826
. new-out 12016
. old-out 10250
. new-old 1766
.
RAM
. without 2807
. with new 2875
. with old 3545
. new-out 68
. old-out 738
. new-old -670
==================================================================
minor changes - mostly formatting
1) added newline to end of teensyduino file
2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings
about redefining TEENSYDUINO
3) removed some trailing spaces
reduce PROGMEM size & update pin list
Reduced PROGMEM usage by
1) converting often used macro to a function
2) moved as much as possible into the function
This required creating two arrays of address pointers for the PWM
registers.
==================================================================
update with new M3, M4, M5 pin names
==================================================================
report I/O status for unused/unknown pins
2017-04-06 16:06:01 -05:00
Scott Lahteine
e116723b8b
Adjust indentation in ubl.h
2017-04-06 16:06:00 -05:00
Scott Lahteine
1b3a26f2f5
Rename all UBL files with a ubl_ prefix
2017-04-06 16:06:00 -05:00
Scott Lahteine
d13991ae18
Use same config name for all mesh dimensions
2017-04-06 16:05:59 -05:00
Bob-the-Kuhn
f9686a108c
add Z servo test and toggle pins to M43
2017-04-06 15:59:38 -05:00
Scott Lahteine
62cbaa302e
Z_DUAL_ENDSTOP - make offset a configuration item
...
The offset for Z_DUAL_ENDSTOP (z_endstop_adj) is already in Marlin.
This PR just makes it a configuration item.
z_endstop_adj is initialized in two places so both had to be modified.
2017-04-06 15:57:10 -05:00
Scott Lahteine
c9e35004e7
pinsDebug with more features, uses less RAM
...
I've just uploaded a major change to pinsDebug.
The big change was creating an array in FLASH that contained every
active pin definition. That reduced the RAM memory usage considerably
but increased the FLASH usage.
Creating the array requires going through the pin list twice. Rather
than having two copies of it in the code I moved the list out to another
file (pinsDebug_list.h) and then just did two #includes.
From the user’s view they’ll see the following changes:
1. Now reports all the names assigned to a pin
2. The port is now reported in addition to the pin number.
3. When PWM0A & PWM1C share a pin, both PWMs are reported
4. More PWM/Timer info is reported
One new item that may cause some concern is the usage of the LINE
predefined preprocessor macro. It may not be available if the Arduino
IDE goes to a different compiler.
Includes support for 1284 & 1286 families.
Memory usage changes when enabling PINS_DEBUGGING:
ATmega2560
FLASH
. without 52576
. with new 64592
. with old 62826
. new-out 12016
. old-out 10250
. new-old 1766
.
RAM
. without 2807
. with new 2875
. with old 3545
. new-out 68
. old-out 738
. new-old -670
==================================================================
minor changes - mostly formatting
1) added newline to end of teensyduino file
2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings
about redefining TEENSYDUINO
3) removed some trailing spaces
reduce PROGMEM size & update pin list
Reduced PROGMEM usage by
1) converting often used macro to a function
2) moved as much as possible into the function
This required creating two arrays of address pointers for the PWM
registers.
==================================================================
update with new M3, M4, M5 pin names
==================================================================
report I/O status for unused/unknown pins
2017-04-06 14:46:28 -05:00
Scott Lahteine
4abd53f65a
Adjust indentation in ubl.h
2017-04-06 05:36:16 -05:00
Scott Lahteine
f5c5c1f771
Rename all UBL files with a ubl_ prefix
2017-04-06 05:33:27 -05:00
benlye
f1d50ac1dc
Fixing bilinear Z offset and G29 Z
...
The fix in #6251 for bilinear Z offset was flawed and broke the Z parameter of G29 for bilinear levelling. This is reverted and a different fix is used for the double-addition of the Z-probe offset to the bilinear correction grid.
2017-04-06 07:41:46 +01:00
Scott Lahteine
eb1e6aa29b
Use same config name for all mesh dimensions
2017-04-06 00:42:52 -05:00
Scott Lahteine
c961dd084d
Add hidden option to output Bilinear grids in JSON
2017-04-05 23:43:17 -05:00
Scott Lahteine
df7b4252fd
Reduce M420 code for UBL slightly
2017-04-05 22:30:29 -05:00
Scott Lahteine
8866158d03
Add LEVELING_DATA as a capability
2017-04-05 22:30:28 -05:00
benlye
0a2b4f3486
Fix bilinear levelling z offset
...
Since run_probe was altered to return the probe Z position rather than the nozzle Z position bilinear levelling has been broken because the Z-offset has been applied twice - once in the run_probe function, and then again in the G29 code for bilinear levelling.
2017-04-05 22:01:40 -05:00
Scott Lahteine
44a849bdce
Fix broken M206/M428/G92 offsets
2017-04-05 22:01:37 -05:00
Roxy-3D
52978e5ba5
Fix spelling mistake when UBL's mesh is Inactive
2017-04-02 20:07:09 -05:00
Roxy-3D
0423e93c42
Fix M421 AUTO_BED_LEVELING_BILINEAR and AUTO_BED_LEVELING_UBL
...
M421 was not connected up for AUTO_BED_LEVELING_BILINEAR.
M421 needed to migrate mesh data to new UBL EEPROM layout.
2017-04-02 16:46:37 -05:00
Scott Lahteine
3412950abc
Merge pull request #6209 from thinkyhead/rc_psu_zero
...
Power Supply 0 as "General"
2017-04-02 16:44:42 -05:00
Roxy-3D
3e9e94801f
Fix problem described in issue # 6175
...
As it turns out... an unsigned int can not go to less than 0, so the
loop never terminates.
2017-04-02 13:00:27 -05:00
Scott Lahteine
289e3d6844
Merge pull request #6215 from thinkyhead/rc_bed_false_alarm
...
Fix thermal runaway when nonexistent bed temp is set
2017-04-02 11:59:58 -05:00
Scott Lahteine
948728e63b
Fix line-endings in UBL_G29
2017-04-02 11:48:26 -05:00
Scott Lahteine
699310d1d2
Fix: Thermal runaway if nonexistent bed's temp is set
2017-04-02 11:48:10 -05:00
Scott Lahteine
c56eec29f0
Configurable delay for BLTouch servo emulation
2017-04-02 11:14:53 -05:00
Scott Lahteine
deaad78df9
Merge pull request #5678 from Bob-the-Kuhn/G38-optional-double-tap
...
G38 bug fix, made double touch optional & reverted to Z_MIN_PROBE
2017-04-02 10:32:04 -05:00
Scott Lahteine
5bce731962
Fix LCD preheat menus
2017-04-02 09:32:22 -05:00
Scott Lahteine
4c72167af3
Prevent a warning on echo_command
2017-04-02 08:36:58 -05:00
Scott Lahteine
9b5fd9522e
Fix formatting, order for a UBL change
2017-04-02 07:15:40 -05:00
Tannoo
54173c80ad
Power Supply 0 as "General"
2017-04-02 06:21:34 -05:00
Scott Lahteine
a2775d0c70
can wstring be removed?
2017-04-02 04:43:33 -05:00
Scott Lahteine
de4e19f17e
Patch MarlinSerial to match up with 32-bit version
2017-04-02 04:39:18 -05:00
Scott Lahteine
2cbc7b4b73
Relocate serial macros and functions
2017-04-02 01:05:25 -05:00
Scott Lahteine
eaa66f3c46
Indent MarlinSerial code
2017-04-02 01:05:25 -05:00
Scott Lahteine
7a7a80e6c5
status_printf => lcd_status_printf_P
2017-04-02 01:05:25 -05:00
Scott Lahteine
0e6ec34228
Use PSTR versions of lcd_status... to save SRAM
2017-04-02 00:45:39 -05:00
Scott Lahteine
34e2420b9b
Apply const args, clean up find_closest_circle_to_print
2017-04-01 23:15:41 -05:00
Scott Lahteine
e19fbd27ce
Minor spelling patch
2017-04-01 23:08:00 -05:00
Scott Lahteine
790a3e9a8c
Remove extraneous check of UBL_G26_MESH_EDITING
2017-04-01 23:03:40 -05:00
Scott Lahteine
7310110ec0
Fix logic of UBL::fade_scaling_factor_for_z
2017-04-01 22:52:48 -05:00
Scott Lahteine
1a775cecac
Revert behavior of enqueue_and_echo_commands_P
2017-04-01 21:53:46 -05:00
Scott Lahteine
79d42d87c1
Syntax cleanup
2017-04-01 21:53:46 -05:00
Scott Lahteine
b47fd31c37
Revert some changes to UBL
2017-04-01 21:53:45 -05:00
Bob-the-Kuhn
185337e787
add delays to allow stop & kill messages to get out
2017-04-01 00:23:14 -05:00
Scott Lahteine
63abb65146
Update description of PINS_DEBUGGING
2017-03-31 18:57:48 -05:00
Scott Lahteine
73e193da1d
Implement LCD_BED_LEVELING for PROBE_MANUALLY
2017-03-31 11:50:18 -05:00
Scott Lahteine
fcadc7bb1a
Implement the "manual" option for ABL
2017-03-31 11:50:18 -05:00
Scott Lahteine
9e22184936
Add a "manual" option for ABL
2017-03-31 11:50:18 -05:00
Scott Lahteine
541165e878
Merge pull request #6181 from thinkyhead/rc_ubl_further_fixes
...
Further adjustments to UBL code
2017-03-31 11:35:02 -05:00
Scott Lahteine
b19a15fa7f
Within applied to UBL
2017-03-31 11:12:57 -05:00
Scott Lahteine
342ee458ae
Additional UBL fixes, optimizations
2017-03-31 11:12:57 -05:00
Scott Lahteine
a5e085cbea
Have run_probe() return probe Z, not nozzle Z
2017-03-31 09:27:49 -05:00
Scott Lahteine
4487d22d56
Apply FIXFLOAT macro
2017-03-31 09:27:48 -05:00
Scott Lahteine
6cac0f43eb
MBL fiddle
2017-03-31 09:27:48 -05:00
Scott Lahteine
25a6bfa7ed
Add and apply WITHIN macro
2017-03-31 09:27:48 -05:00
Scott Lahteine
81136c1e82
Merge pull request #6177 from thinkyhead/rc_tinyboy
...
Support for TinyBoy 2 3D printer (and its OLED display)
2017-03-31 04:31:47 -05:00
Scott Lahteine
93aad54dc1
Clean up code, remove _now command function
2017-03-31 04:17:31 -05:00
Stefan Brüns
6ba6c92a81
Add example configuration for TinyBoy L10/L16
...
The TB2 is a Indiegogo funded 3d printer. It uses a MKS SMELZI V1.0
main board (based on MELZI, i.e. Sanguinololu). I comes as a complete kit,
including display and panel.
Two variants exists, L10 and L16, with a height of 100 and 160 mm.
The heating function of the provided bed can enabled by soldering a
thermistor and some wires to it.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-31 04:05:35 -05:00
Stefan Brüns
0fe57ad4f5
Add Support TinyBoy2 OLED/Encoder panel
...
The OLED is driven by an SSD1306, connected to the board via
I2C, the rotary encoder is connected to 3 GPIO pins.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-31 04:05:34 -05:00
Scott Lahteine
65ca6472ba
Make G26 compatible with G92 and M206
2017-03-31 02:20:20 -05:00
Scott Lahteine
4902fd4e95
More data in UBL class, make it a static class
...
- Make all `unified_bed_leveling` data/methods static
- Move some UBL-related variables into the class
- Replace `map_[xy]_index_to_bed_location` with `mesh_index_to_[xy]pos`
2017-03-31 02:20:20 -05:00
Scott Lahteine
edbc024d76
Disable UBL_G26_MESH_EDITING by default
2017-03-31 02:20:20 -05:00
Scott Lahteine
9e4bd6b3b5
Further repairs to UBL, comments, spacing
2017-03-31 02:20:20 -05:00
Bob-the-Kuhn
f3618c3337
Reduce UBL RAM usage by making G26/G29 optional
2017-03-31 02:20:19 -05:00
Scott Lahteine
c9eb1d6ab7
Make MBL a static class, use lookup for index-to-point conversion
2017-03-31 01:28:07 -05:00
Scott Lahteine
de9d2cddc3
Merge pull request #6152 from thinkyhead/rc_cleanup_6150_etc
...
UBL cleanup, optimization
2017-03-30 17:40:29 -05:00
Scott Lahteine
9217e4b8ec
Various UBL cleanups and bug fixes
2017-03-30 17:09:49 -05:00
Scott Lahteine
9924199802
Merge pull request #5908 from thinkyhead/rc_fix_slowdown
...
General minor cleanup
2017-03-29 21:43:33 -05:00
Scott Lahteine
0e71e7b2fb
Cleanup to planner.cpp
2017-03-29 06:48:07 -05:00
Scott Lahteine
f105cad43c
Marlin: Slight cleanup to Marlin_main.cpp
2017-03-29 06:40:29 -05:00
Scott Lahteine
499f9e04e1
Marlin: Temperature soft-PWM cleanup
2017-03-29 06:37:27 -05:00
Scott Lahteine
7ddd94dc61
Merge pull request #5994 from StefanBruens/fix_Makefile_errors
...
Fix makefile errors, cleanup
2017-03-29 06:32:08 -05:00
Scott Lahteine
af09095f03
Merge pull request #6154 from thinkyhead/rc_fil_sensor_vs_sd
...
Show Filament Width on LCD when SD is disabled
2017-03-29 05:24:48 -05:00
Remo Kallio
d38b1bc4b1
Show filament width sensor values in LCD constantly if SD card support is not enabled.
2017-03-29 04:03:08 -05:00
Scott Lahteine
e3459ec178
Merge pull request #5989 from MagoKimbra/rc_fix_delta_angles
...
Fix delta_angles
2017-03-29 03:35:18 -05:00
Scott Lahteine
f49aec057f
Tweak "can not" => "can't" in RUMBA pins
2017-03-29 01:04:50 -05:00
Scott Lahteine
0a23a1bb3b
Dynamic feedrate on SCARA, converting target mm/s to deg/s
2017-03-28 17:21:07 -05:00
Roxy-3D
d8724bb546
Get G29's P1 (Automated Probing) working again.
...
Incorrect optimizations of data types and ternary operators caused some
issues.
2017-03-28 17:11:02 -05:00
Scott Lahteine
c7f6ee9c93
Board A4JP should be SCOOVO_X9H
2017-03-27 22:22:13 -05:00
Scott Lahteine
a9fc30ae2e
Use safe_delay to ensure watchdog reset
2017-03-26 23:49:56 -05:00
Roxy-3D
171904b6c7
Make G29 What command print reliably and fix G29 P1 bug Waldo found
2017-03-26 17:05:58 -05:00
Roxy-3D
9d3ac66f73
Map clean up of UBL
...
UBL's maps are cleaner. And with a 1 value, G29 O 1 will generate a
map suitable to be Cut & Pasted into Excel so a Suface Map can be
generated.
2017-03-25 18:55:05 -05:00
Roxy-3D
9a1949a91e
Cleaned up G26 ready to replace existing one at MarlinFirmware/Marlin
2017-03-25 10:15:40 -05:00
Roxy-3D
aec85ad45a
Start of process to get UBL running again.
...
The wait_for_user change totally broke UBL. But there is stuff wrong
now in the thermal code and/or LCD Panel code.
2017-03-24 18:38:27 -05:00
Scott Lahteine
b47eaf14ae
Merge pull request #6109 from thinkyhead/rc_soft_pwm_dither
...
PWM dithering followup
2017-03-24 18:21:07 -05:00
Scott Lahteine
34d1c41b5f
Merge pull request #6111 from benlye/benlye-patch-echo_command
...
Fix type conversion issue with echo_command
2017-03-24 17:57:28 -05:00
benlye
6a601aca35
Fix type conversion issue with echo_command
...
With the the current definition of echo_command I cannot compile RCBugFix (Arduino IDE 1.8.1) with the error "invalid conversion from 'const char*' to 'char*'". This change resolves that.
2017-03-24 17:23:02 +00:00
Scott Lahteine
009a6ddd39
Adjust bilinear grid in M851
2017-03-24 06:28:59 -05:00
Scott Lahteine
eab7854a73
Merge pull request #6074 from thinkyhead/rc_immediate_shove
...
Immediate commands take precedence
2017-03-24 05:52:27 -05:00
Stefan Brüns
5699e2b881
Add SOFT_PWM_DITHER to other configurations
2017-03-24 05:02:24 -05:00
Scott Lahteine
5a2abeca78
Merge pull request #6100 from thinkyhead/rc_soft_pwm_dither
...
Enhancement of PWM, with dithering
2017-03-24 04:57:40 -05:00
Scott Lahteine
043be2856b
Use "& 0x3F" instead of "% 64"
2017-03-24 04:13:50 -05:00
Stefan Brüns
6a040a6967
SOFT_PWM: Do not switch off heaters twice on pwm_count wraparound
...
After wraparound, pwm_count <= pwm_mask holds, thus soft_pwm_X <= pwm_count
guarantees soft_pwm_X < pwm_mask is true, and the heater will be switched
off in the first branch.
Do not evaluate the pwm conditions a second time, this reduces the
instruction count (4 instructions per PWM) and text size (6 byte).
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-24 04:13:50 -05:00
Stefan Brüns
0a74774af1
soft_pwm: avoid useless refetches of pwm_count
...
The compiler is not able to reuse the value of pwm_count, but reloads it
on every evaluation, if is stored in a static variable, as it cannot prove
it will be unchanged. A variable with local scope may not be modified from
the outside, so its value can be reused.
Doing so reduces text size and instruction count.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-24 04:13:50 -05:00
Stefan Brüns
35a55d5757
SOFT_PWM: Implement dithering if SOFT_PWM_SCALE is 1 or more
...
If dithering is enabled, the remainder of the soft_pwm_X duty value at
turnoff time is added to the next cycle. If e.g. the duty is set to 9 and
SCALE is set to 2, the PWM will be active for 8 counts for 3 cycles and
12 counts on each fourth cycle, i.e. the average is 9 cycles.
This compensates the resolution loss at higher scales and allows running
fans with SOFT_PWM with significantly reduced noise.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-24 04:13:36 -05:00
Stefan Brüns
2aed66a955
temperature: Fix SOFT_PWM off by one
...
A 128 step PWM has 127 intervals (0/127 ... 127/127 duty). Currently, a
PWM setting of 1/127 is active for 2/128, i.e. double the expected time,
or, in general n+1/128 instead of n/127.
Fixes issue#6003.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-24 04:13:36 -05:00
Scott Lahteine
b5711a99a2
Patches to bring UBL closer to compliance
2017-03-24 01:37:52 -05:00
Scott Lahteine
d076c1b604
Apply some general cleanup to code
2017-03-24 01:37:51 -05:00
Scott Lahteine
d1e6b0e21a
Reduce STEP_PULSE_CYCLES code slightly
2017-03-24 00:50:05 -05:00
Scott Lahteine
783338a0b8
Add UBL_MESH_EDIT_ENABLED to configs
2017-03-24 00:44:55 -05:00
Scott Lahteine
8d54ffbf05
Adjust vector_3 code with const, some optimization
2017-03-23 19:41:42 -05:00
Roxy-3D
8ee2612ebb
The hex nibble routine can print again!
...
The code to print a hex nibble got broke. SERIAL_ECHO( (char) ) isn't
suitable for its use.
2017-03-23 16:08:37 -05:00
Roxy-3D
b8e4a6970b
Get UBL up and running again
...
All the changes to get the code into compliance with Marlin coding
standards made UBL sick. This pretty much gets UBL back up and
running.
2017-03-23 16:08:37 -05:00
Roxy-3D
5de1da2b3c
Make UBL honor the #define ENABLE_LEVELING_FADE_HEIGHT option
2017-03-23 16:08:37 -05:00
Scott Lahteine
8f9face956
Merge pull request #6088 from rafaljot/patch-3
...
Update Marlin_main.cpp
2017-03-23 01:51:51 -05:00
Scott Lahteine
782634b6c9
Merge pull request #6081 from Sebastianv650/MIN_STEPPER_PULSE_for_Babystepping
...
Add MINIMUM_STEPPER_PULSE ability to babystepping
2017-03-22 21:57:36 -05:00
Scott Lahteine
af2ea23e9c
EXTRUDER_RUNOUT_PREVENT uses buffer_line_kinematic
2017-03-22 20:51:12 -05:00
Scott Lahteine
cd882b88db
#if defined => #ifdef / PIN_EXISTS
2017-03-22 20:51:11 -05:00
Scott Lahteine
e244399766
Additional cleanup of UBL code
2017-03-22 20:51:10 -05:00
Bob-the-Kuhn
0934563b97
G38 optional double touch
...
Made the double touch portion a conditional compile based on the
PROBE_DOUBLE_TOUCH flag.
==============================================
Bugfix
The current G38 only stopped a move if it involved the Z axis.
Moved all the G38 code to it's own section and put it where it would
always be executed no matter what axis was moving or if the endstop was
enabled.
Also added a comment to configuration_adv to alert the user the double
tap had to be turned on.
==============================================
Change G38 back to using Z_MIN_PROBE
There's no Z_MIN endstop if Z_DUAL_ENDSTOPS is enabled and you have them
set to the top of the gantry.
G38 started out as using the Z_MIN_PROBE pin. I don't remember why we
changed it to the Z_MIN endstop.
2017-03-22 15:08:49 -05:00
Scott Lahteine
cc3204509c
UBL patch from Bob-the-Kuhn
2017-03-22 07:54:20 -05:00
Scott Lahteine
b904b5ae8d
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
Sebastianv650
bf57eb2447
Protect Babystepping against other ISRs
...
Especialy against stepper ISR.
This is even more important when a minimum pulse width is set,
increasing the runtime of a babystep.
2017-03-21 18:05:44 +01:00
Sebastianv650
80830919dc
Add MINIMUM_STEPPER_PULSE ability to babystepping
2017-03-21 17:50:38 +01:00
rafaljot
6da949bbf0
Update Marlin_main.cpp
...
Sometimes after killing heaters are still on.
2017-03-21 15:06:01 +01:00
Roxy-3D
72f7b14e66
Make G29's Interactive Mesh Editor Work
2017-03-20 12:52:51 -05:00
Roxy-3D
3fd74b121f
Get G29's Interactive Mesh Editor running
...
G29 P4 R O should work now.
2017-03-20 12:52:51 -05:00
Roxy-3D
1d58558bec
Spelling fix
2017-03-20 12:52:51 -05:00
Scott Lahteine
2573f4dd05
Merge pull request #6052 from thinkyhead/rc_lift_on_pause
...
Add PARK_HEAD_ON_PAUSE feature / M125
2017-03-20 03:36:31 -05:00
Scott Lahteine
48c6284c91
Immediate commands take precedence
2017-03-19 21:50:48 -05:00
Roxy-3D
76c270fdf2
Allow FWRETRACT with UBL Enabled
...
The retraction flag in UBL's G26 was conflicting with the FWRETRACT option.
All fixed!
2017-03-19 15:43:12 -06:00
Roxy-3D
c377c59d47
Allow G29 P1 R to generate the mesh
...
Fix the logic change that happened when UBL got merged.
2017-03-19 15:13:33 -06:00
Scott Lahteine
ff0dd162b7
PARK_HEAD_ON_PAUSE implementation
2017-03-19 07:27:35 -05:00
Scott Lahteine
26473cab6d
Add PARK_HEAD_ON_PAUSE feature
2017-03-19 05:06:55 -05:00
Scott Lahteine
4cf51157b3
Use XYZE rather than NUM_AXIS
2017-03-19 01:14:39 -05:00
Scott Lahteine
4c7f14752a
Add disable_e_steppers function
2017-03-19 01:14:39 -05:00
Scott Lahteine
8eb29f91e6
Patch filament change options and beep code
2017-03-19 01:14:39 -05:00
Scott Lahteine
56c9dfc83b
Merge pull request #6066 from thinkyhead/rc_felix_fix
...
Update Felix config for UBL
2017-03-19 01:11:02 -05:00
Scott Lahteine
9b2b53f63a
Merge pull request #6042 from thinkyhead/rc_fix_toolchange_z
...
Move Z last in tool-change for SWITCHING_EXTRUDER
2017-03-19 00:34:41 -05:00
Scott Lahteine
f98fb6b38e
Update Felix config for UBL
2017-03-19 00:28:48 -05:00
Scott Lahteine
7cabe81373
Merge pull request #6057 from thinkyhead/rc_followup_6054
...
Followup 6054 with some cleanup
2017-03-18 13:49:20 -05:00
Scott Lahteine
4bca27ab89
Fix Kelvin conversion
...
Thanks to @ospalh -- #6056
2017-03-18 13:23:08 -05:00
Scott Lahteine
143ab8f329
Remove Roxy's personal configurations
2017-03-18 12:35:02 -05:00
Scott Lahteine
2512871a36
Patch configs UBL followup
2017-03-18 12:32:03 -05:00
Scott Lahteine
27b5666e15
Move Allen Key probe definition to the top
2017-03-18 12:27:37 -05:00
Scott Lahteine
77cf648ed3
Move menu selection past static items in 1 screen
2017-03-18 12:26:21 -05:00
Scott Lahteine
2c630a1b5c
Merge pull request #6054 from thinkyhead/rc_ubl_renewal
...
UBL for RCBugFix — cleanup, rebase, patch
2017-03-18 12:07:57 -05:00
Scott Lahteine
0492a3a8f1
Merge pull request #6027 from Bob-the-Kuhn/add_kill_info
...
Message for every KILL and STOP
2017-03-18 11:49:35 -05:00
Scott Lahteine
6618346148
Patches to work around "register spill" compiler bug
2017-03-18 11:35:21 -05:00
Scott Lahteine
be7dd90382
Add Thermistor 75: MGB18 silicon pad
2017-03-18 11:35:20 -05:00
Scott Lahteine
b0a9c82c31
Fix single-char echo and pinMode usage
2017-03-18 11:35:20 -05:00
Scott Lahteine
fb60aa3736
UBL implementation
2017-03-18 11:35:20 -05:00
Scott Lahteine
238b8fd2a3
UBL core and support files
2017-03-18 11:35:19 -05:00
Scott Lahteine
cf94688925
Univeral Bed Leveling - configuration
2017-03-18 11:35:19 -05:00
Scott Lahteine
03aa424ccb
Merge pull request #6053 from thinkyhead/rc_clean
...
Remove extraneous whitespace
2017-03-18 03:26:45 -05:00
Scott Lahteine
af644871bf
Merge pull request #6045 from thinkyhead/rc_remove_raw_kinematics
...
Remove delta optimization concepts… for now
2017-03-18 03:26:24 -05:00
Scott Lahteine
77491dd924
Remove extraneous whitespace
2017-03-18 03:17:39 -05:00
Scott Lahteine
b865b21d32
Can't use Z fade height with DELTA
2017-03-17 08:34:47 -05:00
Scott Lahteine
1e57b0c269
Remove delta interpolation concept
2017-03-17 06:32:11 -05:00
Scott Lahteine
e46898f8e5
Remove kinematic optimizations
2017-03-17 06:30:22 -05:00
Scott Lahteine
11f1fdfab4
_lcd_level_bed_position => manual_probe_index
2017-03-17 06:05:17 -05:00
Scott Lahteine
0e410c9dfd
Software endstop options as simple switches
2017-03-17 06:05:17 -05:00
Scott Lahteine
d01b915085
Implement soft_endstops_enabled for clamping
2017-03-17 06:05:17 -05:00
Scott Lahteine
e4649c9044
Add HAS_SOFTWARE_ENDSTOPS macro
2017-03-17 06:05:17 -05:00
Scott Lahteine
3e927ff204
Replace MBL Z hacking
2017-03-17 06:05:17 -05:00
Scott Lahteine
4e53124681
Merge pull request #6039 from Bob-the-Kuhn/M114-sync-with-stepper
...
M114 - wait for move completion before reporting position
2017-03-17 05:22:46 -05:00
Scott Lahteine
734f9ea133
Merge pull request #6040 from thinkyhead/rc_sanity_use_assert
...
Simplify some sanity checks with static_assert
2017-03-17 05:22:17 -05:00
Scott Lahteine
f02af83d42
Remove some extraneous spaces
2017-03-16 23:59:11 -05:00
Scott Lahteine
672e45652e
Improved solution to tool-change bug
2017-03-16 23:59:10 -05:00
Scott Lahteine
23f1cfb46f
Fix stuck CHDK pin as suggested in #6041
2017-03-16 21:49:39 -05:00
Scott Lahteine
0b22069e82
Merge pull request #6021 from Bob-the-Kuhn/BUG-FIX--Switching-extruder-tool-change-Z-height
...
Bug Fix: Switching extruder tool change leaves Z in wrong position
2017-03-16 21:15:20 -05:00
Scott Lahteine
e7e4500629
Simplify some sanity checks with static_assert
2017-03-16 16:31:34 -05:00
Bob-the-Kuhn
34ff0c3439
M114 - wait for move completion before reporting position
2017-03-16 15:10:45 -05:00
Bob-the-Kuhn
b31604a492
Message for every KILL and STOP
...
No more mystery halts & resets
Moved messages to language.h
Added current command to inactive timeout message
2017-03-15 21:05:11 -05:00
Kai
13b44d019b
Update language_de.h
...
Addition of missing strings to match language_en.h
2017-03-15 16:06:52 +01:00
Bob-the-Kuhn
685ed5393a
Bug Fix: Switching extruder tool change leaves Z in wrong position
...
The tool_change function saves the current_position to the destination
array soon after starting. Later in the switching extruder section, the
destination array is modified when moving the Z axis up & down. A later
section of tool_change moves the head back to the “original location”
using the destination array. This later section assumes that the
destination array hasn’t been modified.
The fix is to save the destination Z position and then restore it after
the Z movements have completed.
Going back to using the current_position array for the switching
extruder Z axis moves (and leaving the destination array untouched)
doesn’t fix the problem.
This bug was introduced by the “Make tool_change kinematic compatible”
commit # 847429eff4
which was merged on 10
Oct 2016 as part of PR 4982.
This bug was discovered in Issue 5966.
2017-03-14 02:36:24 -05:00
Scott Lahteine
51353f8fea
Merge pull request #6000 from trivalik/NoWorkspaceWarning
...
prevent warning with define of NO_WORKSPACE_OFFSETS
2017-03-12 00:00:51 -06:00
MagoKimbra
a4a9bd8bc9
Fix BUG set_position_mm
...
Set postion must have axis and not E_AXIS + active_extruder.
2017-03-11 14:13:39 +01:00
Trivalik
71ac6f9d42
prevent warning with define of NO_WORKSPACE_OFFSETS
2017-03-09 23:49:57 +01:00
Stefan Brüns
9ba6c051a1
Makefile: add nozzle.cpp too CXXSRC list
...
The file is required by the optional NOZZLE_PARK_FEATURE.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-09 03:08:49 +01:00
Stefan Brüns
9cc8d495b8
Makefile: remove no longer existing search paths
...
ArduinoAddons has been removed from Marlin, remove any references to it.
Replace HARDWARE_SRC and HARDWARE_DIR with its expanded equivalents.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-09 01:46:47 +01:00
Stefan Brüns
bf563e62c1
Makefile: add printcounter.cpp too CXXSRC list
...
The file is required by the optional PRINTCOUNTER feature.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-09 01:45:54 +01:00
Stefan Brüns
ddecc1441d
Makefile: Fix linker error
...
Instantiation of the static singleton instance thermalManager in general
requires locking, but we know its safe to do without.
Add -fno-threadsafe-statics to avoid using locking primitives, which
result in linking errors:
undefined reference to `__cxa_guard_acquire'
undefined reference to `__cxa_guard_release'
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-09 01:45:38 +01:00
MagoKimbra
37a26dfc09
Fix delta_angles
2017-03-08 09:23:30 +01:00
Scott Lahteine
2defb1d748
Use SET_INPUT_PULLUP where appropriate
2017-03-07 23:43:33 -06:00
Scott Lahteine
58b3e98878
Use arrays for delta tower parameters
2017-03-07 19:00:22 -06:00
Scott Lahteine
47242a40bb
Apply updated changes for delta_tower_angle_trim
2017-03-07 18:15:11 -06:00
Jimmy Envall
00b6b3da79
Added support for delta tower angle corrections.
2017-03-07 16:35:58 -06:00
Scott Lahteine
5a456c832a
Apply TMC2130 to example configurations
2017-03-07 04:22:06 -06:00
Scott Lahteine
45f949d833
TMC2130 Library: @teemuatlut replaces @makertum
2017-03-07 04:22:06 -06:00
Scott Lahteine
33f8a8a344
Merge pull request #5973 from thinkyhead/rc_circle_pattern
...
Add circle pattern to nozzle clean
2017-03-06 04:47:01 -06:00
Scott Lahteine
94b3e0a483
Merge pull request #5959 from benlye/benlye-fixm48
...
Remove extra carriage return in M48 V1 output
2017-03-06 04:24:28 -06:00
Scott Lahteine
a9a1971295
Merge pull request #5972 from thinkyhead/rc_cooldown_before
...
Fix preheat menu formatting
2017-03-06 03:21:29 -06:00
Scott Lahteine
6aa81255a9
Patch and clean up "flsun" kossel. Followup to #5911 .
2017-03-06 03:15:00 -06:00
Scott Lahteine
b2270b3f3e
Apply prior nozzle clean update
2017-03-06 03:14:59 -06:00
Marek Pikuła
7698c5617a
Added circle nozzle cleaning parameters to example configurations
2017-03-06 03:04:58 -06:00
Marek Pikuła
6836b94eea
Added circle pattern for nozzle cleaning feature
2017-03-06 03:03:00 -06:00
Scott Lahteine
3b75518ef6
Merge pull request #5911 from aphex3k/flsun_kossel_mini
...
Configuration.h and Configuration_adv.h for the kossel mini by flsun
2017-03-06 02:26:01 -06:00
Scott Lahteine
3830778852
Apply NO_WORKSPACE_OFFSETS to lcd menu
2017-03-06 02:21:42 -06:00
Scott Lahteine
7e3aab889d
Fix preheat menu formatting
2017-03-06 02:07:07 -06:00
Scott Lahteine
fea0d3f20f
Endstop and temp-isr general cleanup
2017-03-06 02:07:07 -06:00
Scott Lahteine
aef08e8780
Compact some macro substitutions
2017-03-06 02:07:07 -06:00
Scott Lahteine
2f620f86d9
Merge pull request #5970 from thinkyhead/rc_cooldown_before
...
Preheat Hotend Only menu items
2017-03-06 01:56:05 -06:00
Scott Lahteine
02de8e6f18
Merge pull request #5957 from MagoKimbra/rc_stepper_indirection_fix
...
Stepper indirection fix tmc driver
2017-03-06 01:16:40 -06:00
Scott Lahteine
6c5312559c
Menu item to preheat only the hotend
2017-03-06 01:14:54 -06:00
Scott Lahteine
9d0142e8ae
Move Change Filament above Cooldown
2017-03-06 01:13:12 -06:00
Scott Lahteine
0c55095c5e
Move Cooldown above Preheat
2017-03-06 01:13:12 -06:00
Scott Lahteine
c15c65f18a
Merge pull request #5971 from thinkyhead/rc_fix_e_factors
...
Patch DISTINCT_E_FACTORS bug
2017-03-06 01:11:17 -06:00
Scott Lahteine
bfb0007573
Patch DISTINCT_E_FACTORS bug
2017-03-05 23:19:31 -06:00
Scott Lahteine
be98016674
Merge pull request #5963 from thinkyhead/rc_no_offsets_optim
...
New option: NO_WORKSPACE_OFFSETS
2017-03-05 21:46:49 -06:00
Scott Lahteine
8e89a802f7
Document PROTOCOL_VERSION
2017-03-05 04:43:46 -06:00
Scott Lahteine
87b03b16bd
Use a macro for array copies
2017-03-05 04:43:46 -06:00
Scott Lahteine
e141f3a03f
Optimize coordinate transformation
...
Pre-compute the combined position shift and home offset to save a
single float fetch-and-add per conversion. Great for delta/scara and
bed leveling.
2017-03-05 04:43:16 -06:00
Scott Lahteine
5f7e85398b
Implement NO_WORKSPACE_OFFSETS
2017-03-05 04:43:15 -06:00
Scott Lahteine
05abe853f9
New option: NO_WORKSPACE_OFFSETS
2017-03-05 04:43:15 -06:00
Scott Lahteine
20addc6e32
Merge pull request #5955 from thinkyhead/rc_eeprom_fail_better
...
Display a message for EEPROM version mismatch
2017-03-04 17:15:07 -06:00
benlye
dead89062a
Update Marlin_main.cpp
...
Remove unnecessary line break from M48 V1 output.
2017-03-04 17:58:10 +00:00
MagoKimbra
ae277aebc6
Stepper indirection fix tmc driver
2017-03-04 12:17:39 +01:00
Scott Lahteine
8f4e4b1995
Display a message for EEPROM version mismatch
2017-03-04 01:20:36 -06:00
Scott Lahteine
177ad245f6
Merge pull request #5953 from thinkyhead/fix_fc_e_index
...
Fix submenu hotend status display
2017-03-04 00:12:29 -06:00
Scott Lahteine
cea3ea772c
Fix submenu hotend status display
2017-03-03 22:12:22 -06:00
Scott Lahteine
b27f69ba51
Merge pull request #5813 from thinkyhead/rc_fix_makrpanel
...
Fix MAKRPANEL assignments
2017-03-03 21:40:49 -06:00
Scott Lahteine
1ef6ccd919
Merge pull request #5951 from thinkyhead/rc_print_2d_array
...
Reduce code size (40b, or 166b with bilinear subdivision)
2017-03-03 21:27:44 -06:00
Scott Lahteine
53f5086905
Fix MAKRPANEL assignments
...
MAKRPANEL is a DOGLCD+ULTRA_LCD+NEWPANEL so customize its pins within
that block.
2017-03-03 21:22:21 -06:00
Scott Lahteine
98c7b682ca
General cleanup, const usage, var naming
2017-03-03 20:57:49 -06:00
jes
369bfc8a1e
Reduce code size (40b, or 166b with bilinear subdivision)
2017-03-03 20:36:32 -06:00
Scott Lahteine
0d13412105
Fix "Heating..." message
2017-03-03 12:12:51 -06:00
Scott Lahteine
5065636023
Merge pull request #5934 from thinkyhead/rc_advance_ed_ratio
...
LIN_ADVANCE: Fixed E/D ratio option
2017-03-03 03:24:41 -06:00
divendres
75ad82baab
Update Catalan language
2017-03-02 20:40:06 -06:00
Scott Lahteine
34253497d4
Babysteps code tweak
...
As suggested by https://github.com/MarlinFirmware/Marlin/pull/5887#issuecomment-283832163
2017-03-02 20:35:45 -06:00
Scott Lahteine
fb4aead2b1
Clean up and finish #5887
2017-03-02 20:16:29 -06:00
Scott Lahteine
b3e2bd6f29
Reduce E_D_ratio code
2017-03-02 01:00:37 -06:00
Sebastianv650
de6c40ed8f
Add option to fix E/D ratio
...
Work around for slicers producing buggy gcode.
2017-03-02 01:00:37 -06:00
Scott Lahteine
eeb490221f
Remove BEEPER_PIN override in pins_RIGIDBOARD.h
...
Resolves #5926 . This override is no longer needed since the RAMPS LCD controller pins were fixed.
2017-03-01 18:26:29 -06:00
Roxy-3D
11e892bd84
Merge pull request #5887 from Roxy-3D/RCBugFix
...
Double Click of Encoder Wheel Jumps to Z-BabyStepping
2017-03-01 17:15:02 -07:00
Scott Lahteine
cbeff12f8a
Merge pull request #5933 from teemuatlut/lcd_days_hours
...
Fix formatting of SD print time hours above one day
2017-03-01 15:44:10 -06:00
Scott Lahteine
8a4e9d08a3
Merge pull request #5931 from thinkyhead/rc_core_endstop_fix
...
Fix CoreYX / YZ / ZX endstop logic
2017-03-01 15:32:11 -06:00
teemuatlut
9175d16660
Fix formatting of print time hours above one day
2017-03-01 18:55:25 +02:00
Scott Lahteine
b6d9eb229f
Extend Core endstop commentary
2017-03-01 10:01:50 -06:00
Bob-the-Kuhn
c5e08e8761
CoreYX/YZ/ZX needs different endstop logic than CoreXY/YZ/XZ
...
In the endstop testing section, add the "reverse" logic in addition to "normal" core handling.
In CoreXY/YZ/XZ steppers rotating the same direction gives X movement. Opposing directions produces Y movement.
In CoreYX/ZY/ZX this is reversed. Same = Y, Opposite = X.
----
Fixes the issue where the Y endstop was being checked when moving in the X direction, etc.
2017-03-01 09:40:24 -06:00
Scott Lahteine
c759c26cca
Make LCD_TIMEOUT_TO_STATUS configurable
...
As suggested in
https://github.com/MarlinFirmware/Marlin/issues/5570#issuecomment-283059
065
2017-02-28 19:02:50 -06:00
Michael Henke
47729918fc
enable ENSURE_SMOOTH_MOVES
2017-02-27 20:42:49 -08:00
Michael Henke
330b981912
created Configuration.h and Configuration_adv.h for the kossel mini sold by flsun
2017-02-25 21:31:37 -08:00
Colin Gilgenbach
48b7e0f8d8
Nozzle Wipe Vertical Zig-Zag
...
- Add configuration support for zigzags in either the X or Y axis, for
wipe pads significantly longer in one dimension.
- Add configuration for default number of zig-zag triangles, vs. a
magic number in `Marlin_main.cpp`.
- Update description of auto nozzle wiping to match functionality
2017-02-25 21:52:43 -06:00
Scott Lahteine
f17b81b765
Add MAPPER_C2C3 to French language
2017-02-25 18:49:00 -06:00
Roxy-3D
7e607b06eb
Better comments on DOUBLE_CLICK_TIME_WINDOW
2017-02-23 13:13:57 -07:00
Scott Lahteine
34cba42104
Use PSTR for MSG_HEATING
2017-02-22 11:30:19 -06:00
Roxy-3D
584d147a02
fixup the indentation
2017-02-22 07:23:54 -07:00
Roxy-3D
e443e0e2a9
Fix scoping issues for double click to Z-Babystepping
2017-02-21 18:15:28 -07:00
Roxy-3D
17d1cd7c09
Double Click of Encoder Wheel Jumps to Z-BabyStepping
2017-02-21 18:08:19 -07:00
Roxy-3D
48d862377a
Double Click of Encoder Wheel Jumps to Z-BabyStepping
2017-02-21 18:04:31 -07:00
Scott Lahteine
cfdc189796
Merge pull request #5856 from thinkyhead/rc_fix_bad_comment
...
Remove non-applicable comment on MANUAL_Z_HOME_POS
2017-02-20 17:54:30 -06:00
dot-bob
cd68380ce6
Add status_printf to print messages to the lcd status line.
...
Also add a hotend indicator to the heating message displayed on the lcd status line.
2017-02-20 15:26:54 -06:00
Scott Lahteine
012aff6823
Merge pull request #5862 from thinkyhead/rc_fix_a_thing
...
Finish reducing of ABL_BILINEAR_SUBDIVISION
2017-02-18 21:36:28 -06:00
Scott Lahteine
b9187020c4
Finish reducing of ABL_BILINEAR_SUBDIVISION
2017-02-18 20:01:19 -06:00
Scott Lahteine
e282b72151
Remove non-applicable comment on MANUAL_Z_HOME_POS
2017-02-18 05:14:43 -06:00
Scott Lahteine
57f92a4632
Apply DISTINCT_E_FACTORS to sync_from_steppers
...
Followup to #5840
2017-02-18 04:36:41 -06:00
Scott Lahteine
4da8b1494b
Merge pull request #5854 from thinkyhead/rc_fixup_m600
...
M600 cleanup and bugfix
2017-02-18 04:27:13 -06:00
Scott Lahteine
dd02dba6e6
Merge pull request #5840 from MagoKimbra/rc_fix_lin_advanced_step_to_mm
...
Fix steps_to_mm for active extruders
2017-02-18 04:25:53 -06:00
Scott Lahteine
6e0b3fcc08
Optimize M600 heater status LCD items
2017-02-18 04:08:00 -06:00
Scott Lahteine
44b4e116bd
Commentary / style in gcode_M600
2017-02-18 04:08:00 -06:00
Scott Lahteine
561904345f
Tweak config ordering for M600
2017-02-18 00:01:31 -06:00
Scott Lahteine
284d6de9da
Remove some old code comments
2017-02-17 15:25:56 -06:00
MagoKimbra
3685224c1a
Fix steps_to_mm for active extruders
2017-02-15 21:45:39 +01:00
Scott Lahteine
4578c573fe
Pause the print job timer while in M600
2017-02-15 05:29:34 -06:00
Scott Lahteine
bfe6f71794
Simplify filament_change_beep function
2017-02-15 05:29:34 -06:00
Scott Lahteine
8289ea1316
Use a short name for the filament "endstop"
2017-02-15 05:29:34 -06:00
Scott Lahteine
d9dcef8a87
Spacing, coding standards
2017-02-15 05:29:34 -06:00
Scott Lahteine
931914e679
Apply M600 updates to all configs
2017-02-15 05:29:34 -06:00
Roxy-3D
8bf0b496b9
Improve M600 with timeout, wait for heatup.
2017-02-15 05:29:34 -06:00
Tannoo
c40fe2113c
Fix for broken MBL
...
LCD call was waiting forever, causing the system to hang.
2017-02-15 04:39:22 -06:00
Scott Lahteine
4d4745c0eb
Parenthesize some menu defines for safety
2017-02-14 23:12:27 -06:00
Scott Lahteine
47f9883b0f
Dynamic allocation for SDCARD_SORT_ALPHA
2017-02-14 21:37:25 -06:00
Scott Lahteine
a561bd5e3a
New feature: SDCARD_SORT_ALPHA
2017-02-14 21:37:24 -06:00
Scott Lahteine
c04d6b5aa6
Merge pull request #5829 from thinkyhead/rc_fix_isr_reentry
...
Combine fixes for LIN_ADVANCE and temperature ISR
2017-02-14 20:36:58 -06:00
Scott Lahteine
467f01435f
Merge pull request #5816 from thinkyhead/rc_abl_virt_reduce
...
Reduce memory use by ABL_BILINEAR_SUBDIVISION slightly
2017-02-14 08:41:44 -06:00
Scott Lahteine
97b6fb6381
Reduce / optimize LIN_ADVANCE code
2017-02-14 07:52:03 -06:00
Sebastianv650
271ced7341
Prevent re-entering of temperature ISR
...
If Marlin is inside the temperature ISR, the stepper ISR is enabled. If
a stepper event is now happening Marlin will proceed with the stepper
ISR. Now, at the end of the stepper ISR, the temperatre ISR gets enabled
again. While Marlin proceed the rest of the temperature ISR, it's now
vulnerable to a second ISR call.
2017-02-14 07:52:03 -06:00
Sebastianv650
1b59766fcb
Cleanup position_float
...
Hopefully fixes Marlin #5481
2017-02-12 13:09:06 +01:00
Scott Lahteine
a950c31e2d
Merge pull request #5815 from thinkyhead/rc_pulses_per_step
...
Give encoder pulse/steps conditionals their own block
2017-02-12 04:14:00 -06:00
Scott Lahteine
7176de8605
Merge pull request #5814 from thinkyhead/hotend_loop_always
...
Make HOTEND_LOOP more consistent, let compiler optimize it
2017-02-12 04:13:14 -06:00
Scott Lahteine
adec219ca5
Merge pull request #5811 from thinkyhead/fix_two_strings
...
No space after X: or A: in M114 output
2017-02-12 04:11:51 -06:00
jes
eaa829b58c
Reduce memory use by ABL_BILINEAR_SUBDIVISION slightly
2017-02-12 04:09:48 -06:00
Scott Lahteine
1c99ca82d8
Give encoder pulse/steps conditionals their own block
2017-02-12 03:57:57 -06:00
Scott Lahteine
e44294bb4d
Make HOTEND_LOOP more consistent, let compiler optimize it
2017-02-12 02:50:38 -06:00
Scott Lahteine
701f4a6d9d
Merge pull request #5729 from Bob-the-Kuhn/guaranteed-BLTouch-detection
...
guaranteed BLTouch detection
2017-02-12 01:13:35 -06:00
Scott Lahteine
c15b9a6a06
No space after X: or A: in M114 output
2017-02-12 00:10:03 -06:00
Scott Lahteine
e1702816f6
Fix SD_CHECK_AND_RETRY condition
...
Addressing #5806
2017-02-11 23:55:56 -06:00
Scott Lahteine
1bc5be3bdf
Cast DELTA_PRINTABLE_RADIUS to float in sq()
...
Addressing #5625
2017-02-11 23:28:39 -06:00
Bob-the-Kuhn
0369f97ec1
guaranteed BLTouch detection
...
To guarantee that the 5mS pulse from a BLTouch is recognized you need to
have the endstops.update() routine run twice in that 5mS period.
At 200 steps per mm, my system has problems below a feedrate of 120 mm
per minute.
Two things were done to guarantee the two updates within 5mS:
1) In interrupt mode, a check was added to the temperature ISR. If the
endstop interrupt flag/counter is active then it'll kick off the endstop
update routine every 1mS until the flag/counter is zero. This
flag/counter is decremented by the temperature ISR AND by the stepper
ISR.
2) In poling mode, code was added to the stepper ISR that will make sure
the ISR runs about every 1.5mS. The "extra" ISR runs only check the
endstops. This was done by grabbing the intended ISR delay and, if it's
over 2.0mS, splitting the intended delay into multiple smaller delays.
The first delay can be up to 2.0mS, the next ones 1.5mS (as needed) and
the last no less than 0.5mS.
=========================================
BLTouch error state recovery
If BLTouch already active when deploying the probe then try to reset it
& clear the probe.
If that doesn't fix it then declare an error.
Also added BLTouch init routine to startup section
2017-02-11 12:01:34 -06:00
Scott Lahteine
1e4d4e5915
Fix typo in language_uk
...
Thanks to @pavlus for this one
2017-02-10 15:34:31 -06:00
Scott Lahteine
7fe7a0c8be
Merge pull request #5793 from thinkyhead/rc_adjust_probe_output
...
Adjust probe_pt() terminal output to respect probe z-offset
2017-02-09 23:05:02 -06:00
Scott Lahteine
633c253bc1
Merge pull request #5792 from thinkyhead/rc_default_dac_vals
...
Default DAC values for RigidBoard V2
2017-02-09 22:56:03 -06:00
Florian Heilmann
7bbc31704c
Adjust probe_pt() terminal output to respect probe z-offset
2017-02-09 22:54:22 -06:00
Scott Lahteine
a245656db3
Merge pull request #5713 from gege2b/RCBF-French
...
French translation : Added missing strings as well as missing accents
2017-02-09 22:43:56 -06:00
jaysonkelly
713931338a
Default DAC values for RigidBoard V2
2017-02-09 22:39:00 -06:00
Bob-the-Kuhn
ae706233a8
pinsDebug for 644/1284 & USB646/1286 families
...
added conditional compilation for PWMs 1C & 3C
add Teensyduino compatibility
==========================================
changes per review - minor formatting changes
1) remove non-printable character at the end of line 687
2) split a really long comment into two lines
3) got rid of some trailing spaces
============================================
Made pinsDebug_Teensyduino.h the same between this PR and PR 5668 which
is for a re-written pinsDebug.h file.
The changes were:
1) added copyright @ GNU license header
2) a blank line crept in.
2017-02-09 07:24:02 -06:00
Gege2B
22dfcc9a71
French translation : Added missing strings as well as missing accents
2017-01-17 23:29:23 +01:00
Scott Lahteine
9b5515926a
Merge pull request #5696 from thinkyhead/rc_volumetric_default
...
Allow enabling volumetric filament on config load
2017-01-14 05:48:51 -08:00
Robert Kirk
0d147ead66
Allow enabling volumetric filament on config load
2017-01-14 04:37:49 -08:00
AnHardt
fa26767efe
Replace all remaining 'boolean' with 'bool'
2017-01-13 13:03:52 +01:00
AnHardt
f6858d9974
Fix M110 without leading N
...
Store N in the right variable.
This is too rarely used.
"mea culpa, mea culpa, mea maxima culpa"
2017-01-13 12:33:50 +01:00
Scott Lahteine
0c0c840ba8
Merge pull request #5683 from emartinez167/EMartinez-Changes
...
Updates to some incorrectly ended strings in the Spanish translation
2017-01-12 07:49:15 -08:00
Kai
25dae3bccc
Update language_de.h
...
Small corrections
2017-01-12 16:06:58 +01:00
emartinez167
7292145f4e
Fix for some wrong strings
...
On last commit, some strings were ended with the incorrect character.
This fixes it.
2017-01-12 22:35:04 +08:00
Scott Lahteine
93a9aa6b76
Merge pull request #5682 from thinkyhead/rc_spanish_jan
...
Updates to Spanish language
2017-01-12 06:14:10 -08:00
Scott Lahteine
7a9c1a279b
Merge pull request #5681 from thinkyhead/rc_prevent_boot_loop
...
Reset watchdog in SD init to prevent reboot
2017-01-12 06:13:56 -08:00
Scott Lahteine
e409c7f9e8
Merge pull request #5645 from esenapaj/From-microseconds-to-milliseconds
...
From "microseconds" to "milliseconds"
2017-01-12 06:02:55 -08:00
emartinez167
020c6af7b0
Updates to Spanish language
...
Add missing Spanish language definitions.
2017-01-12 05:53:39 -08:00
Hans Raaf
d29cc8f7bc
Reset watchdog in SD init to prevent reboot
...
If the watchdog is enabled and bootscreen + SD card checks take too long, Marlin may hang at boot time because of the reset loop. We have this happen all the time with the Anet board if no SD card is inserted.
2017-01-12 05:33:38 -08:00
Scott Lahteine
7743849608
Merge pull request #5680 from thinkyhead/rc_configs_puhlease
...
code_value_float tweak
2017-01-12 05:22:47 -08:00
Scott Lahteine
16357fbfdf
Merge pull request #5619 from Ocarthon/RCBugFix
...
Disable SD Detect for K8400
2017-01-12 05:22:03 -08:00
Scott Lahteine
e57c0fce66
Move MOSFET changes above #include for RIGIDBOARD
...
Correction to #5629
2017-01-12 04:46:49 -08:00
Scott Lahteine
c376f6a2cb
code_value_float tweak
2017-01-12 04:38:09 -08:00
Scott Lahteine
fb3c30e24c
Fix lcd_wait_for_homing causing menu to block
...
As a showcase function for how to do waiting in the lcd menu, this function should be preserved.
2017-01-12 04:37:23 -08:00
Scott Lahteine
f8ae0fd29f
Merge pull request #5647 from manianac/RCBugFix-PrepareMenuFix
...
Fix empty Prepare menu
2017-01-12 04:20:18 -08:00
Robert Kirk
aab5118c6a
Remove error causing break command
...
Use index macro instead of e
2017-01-01 17:47:01 -05:00
esenapaj
d38e335272
From "microseconds" to "milliseconds"
...
delay() is milliseconds
2017-01-02 01:19:33 +09:00
Philip Standt
8ae2bc7e2e
Disable SD Detect for K8400
2016-12-28 23:21:18 +01:00
Scott Lahteine
4061fca1ad
Sanity checks for FILAMENT_CHANGE_FEATURE and FILAMENT_RUNOUT_SCRIPT
2016-12-23 19:55:12 -08:00
Scott Lahteine
5ab7b91615
Comment on filament runout sensor config
2016-12-23 19:50:27 -08:00
Scott Lahteine
922c67f17d
Merge pull request #5588 from thinkyhead/rc_remove_biv25
...
Drop biv2.5 delta configurations
2016-12-23 19:14:50 -08:00
Scott Lahteine
8c6c048551
drop biv2.5 delta configurations
2016-12-23 18:56:07 -08:00
Scott Lahteine
92dbeebf40
Define ADV_NEVER, ADV_RATE
2016-12-23 18:43:23 -08:00
Robert Kirk
306c184b1a
Allow M600 when dryrun debugging
2016-12-21 20:30:51 -05:00
Scott Lahteine
fe2ea2906f
Merge pull request #5573 from thinkyhead/rc_unify_stepper_isr
...
LIN_ADVANCE with unified stepper ISR
2016-12-21 02:53:32 -08:00
Sebastianv650
84c685f8b5
First draft of Unified Stepper / E Advance ISR
2016-12-21 01:34:39 -08:00
Scott Lahteine
83021d82c6
Merge pull request #5502 from AnHardt/symbol-strings
...
Add symbol-strings
2016-12-21 00:51:59 -08:00
Scott Lahteine
036eccfd6e
Merge pull request #5572 from Kaibob2/patch-5
...
Update language_de.h
2016-12-21 00:50:40 -08:00
Scott Lahteine
b794b76836
Merge pull request #5567 from AnHardt/fix5194
...
Fix 5194
2016-12-21 00:49:52 -08:00
Scott Lahteine
451ba5df01
Merge pull request #5516 from esenapaj/Suppress-warning
...
Suppress warning
2016-12-21 00:00:35 -08:00
Scott Lahteine
92dbc63949
Merge pull request #5571 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
2016-12-20 23:59:55 -08:00
Kai
ade72535c4
Update language_de.h
...
Added tarnslation for
```
#define MSG_DEBUG_MENU
#define MSG_PROGRESS_BAR_TEST
```
2016-12-21 08:57:39 +01:00
esenapaj
ab6b005867
Suppress warning
2016-12-21 09:13:03 +09:00
AnHardt
61f15ef7e7
Fix 5194
...
I have been a bit too radical in cleaning up this section.
2016-12-21 00:45:29 +01:00
esenapaj
60515ff700
Update Japanese translation
...
・Add new translation
2016-12-21 08:44:07 +09:00
Scott Lahteine
1e419655f3
Followup to #5550 - spacing before "mm"
2016-12-20 02:27:54 -08:00
Scott Lahteine
1a26ce1cdc
Merge pull request #5550 from FHeilmann/patch-2
...
Allow negative retract values in the LCD
2016-12-20 02:10:22 -08:00
Scott Lahteine
bec30c89e7
Merge pull request #5522 from esenapaj/Add-description-for-dual-x
...
Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE
2016-12-20 01:31:53 -08:00
Scott Lahteine
7739c0affa
Change "+mm" to "mm" in most languages
...
- Japanese and Chinese still need update
2016-12-20 01:16:51 -08:00
Scott Lahteine
1cba425308
Allow negative recover-swap length from LCD
2016-12-20 01:16:08 -08:00
Scott Lahteine
298a8c6a3c
Merge pull request #5561 from thinkyhead/rc_no_case_light
...
Support for M335 case light "no case light"
2016-12-20 01:06:59 -08:00
Scott Lahteine
644f45cbd8
Merge pull request #5563 from akaJes/m600
...
FILAMENT_CHANGE_FEATURE allowed in idle mode
2016-12-20 01:06:10 -08:00
Scott Lahteine
0d2fc13516
Place "Level Bed" closer to "Auto Home"
2016-12-20 00:51:03 -08:00
Scott Lahteine
b031d28ebf
Encoder events should not skip stripes
2016-12-20 00:21:51 -08:00
Scott Lahteine
22881f38b9
Fix updating of "bool" menu items
2016-12-20 00:21:51 -08:00
Scott Lahteine
eb68715b94
No "Cooldown" menu if heaters are off
2016-12-20 00:21:51 -08:00
Jesus
4ed976b5ff
m600 fixes
2016-12-20 09:47:46 +02:00
Damien
4e2639942b
Support for M335 case light "no case light"
2016-12-19 23:23:08 -08:00
Scott Lahteine
18ba31e9b5
Add Debug Menu with LCD_PROGRESS_BAR_TEST as an example
2016-12-19 22:57:14 -08:00
Scott Lahteine
03af5961b0
Hide (or remove) custom character change on boot screen
2016-12-19 22:27:28 -08:00
Scott Lahteine
1642f5ed31
Add macro to some en strings
2016-12-19 22:27:28 -08:00
Scott Lahteine
dbb2d56c89
Correct comment on watchdog timer
2016-12-19 22:27:28 -08:00
Scott Lahteine
41a30923f3
Merge pull request #5559 from thinkyhead/rc_minimum_gcc_version
...
Throw an error for gcc before 4.7
2016-12-19 19:50:44 -08:00
Scott Lahteine
6d6a1db6ec
Apply const to _EEPROM_writeData value param
2016-12-19 18:50:43 -08:00
Robert Kirk
f724ef5820
Have bed leveling status output current status, not requested.
2016-12-19 18:47:45 -08:00
Scott Lahteine
20218e553d
Merge pull request #5527 from MagoKimbra/rc_configuration_store_fix_size
...
Fix size
2016-12-19 18:47:28 -08:00
Scott Lahteine
dcfbe2bd3c
Throw an error for gcc before 4.7
2016-12-19 18:30:51 -08:00
Scott Lahteine
82fde7df2e
Merge pull request #5512 from AnHardt/speed-compare-bbr
...
Optimize handling of block_buffer_runtime()
2016-12-19 18:21:06 -08:00
Scott Lahteine
8986225752
Spacing, cleanup in speed_lookuptable.h
2016-12-19 14:52:45 -08:00
Scott Lahteine
e12c8e5cac
Split up thermistor tables
2016-12-19 14:47:54 -08:00
Florian Heilmann
a7334fd2a0
Allow negative retract values in the LCD
...
This can already be done via G-Code, so adding the capability to the LCD should be straight forward.
2016-12-19 14:19:06 +01:00
AnHardt
292eb365c6
Optimize handling of block_buffer_runtime()
...
millis_t is long - divisions take for ever.
Return a kind of millisecond instead of microsecond -
divided by 1024 instead of 1000 for speed. (2.4% error)
That does not matter because block_buffer_runtime is
already a too short estimation.
Shrink the return-type.
2016-12-19 11:47:28 +01:00
esenapaj
6854f44bf2
Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE
2016-12-19 02:21:10 +09:00
Scott Lahteine
3f6f036f7c
Merge pull request #5524 from thinkyhead/rc_optional_dogm_splitup
...
Report EEPROM data size, not final index
2016-12-16 18:55:48 -08:00
MagoKimbra
86ba7e4542
Fix size
...
Fix size for writeData and readData.
For bilinear grid 11 x 11 for example, size is 4 (float) x 11 x 11 = 484. uint8_t max is 255.
2016-12-16 14:49:33 +01:00
Scott Lahteine
f9f75c8016
Fix USE_RAW_KINEMATICS in prepare_kinematic_move_to
2016-12-15 23:15:38 -08:00
Scott Lahteine
87921f390a
Clarify what are "logical" positions in the planner
2016-12-15 23:15:38 -08:00
Scott Lahteine
a4f10f59c3
Write the E parameter length correctly
2016-12-15 23:15:38 -08:00
Scott Lahteine
2e904cb4f9
Merge pull request #5514 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
2016-12-15 21:38:40 -08:00
Scott Lahteine
0b6817e0f9
Merge pull request #5505 from android444/patch-4
...
Update for translations language_pl.h
2016-12-15 21:38:18 -08:00
Scott Lahteine
3bd76f60e4
Report EEPROM data size, not final index
2016-12-15 20:26:28 -08:00
Scott Lahteine
78d6d6e076
Merge pull request #5452 from thinkyhead/rc_save_your_mesh
...
Save Bed Leveling to EEPROM
2016-12-15 20:23:01 -08:00
Scott Lahteine
0d0aa6c20d
Patch type for max_acceleration_mm_per_s2 save/restore
2016-12-15 20:05:42 -08:00
Scott Lahteine
d4f5418802
Merge pull request #5517 from esenapaj/Fix-for-PR-#5255
...
Fix for the PR #5255 (Case light menu (3rd attempt))
2016-12-15 20:01:22 -08:00
Scott Lahteine
fa7010b0a1
Merge pull request #5515 from esenapaj/Remove-unnecessary-tabs-and-spaces
...
Remove unnecessary tabs and spaces
2016-12-15 19:58:32 -08:00
Scott Lahteine
6d7b1cdf6c
Add M421 for ABL Bilinear
2016-12-15 19:39:11 -08:00
Scott Lahteine
32e65dc429
Extend M420
to print state and, with V
, the matrix / mesh
2016-12-15 19:39:11 -08:00
Scott Lahteine
d04258753b
Don't throw away the bed level matrix on G28
2016-12-15 19:21:18 -08:00
Scott Lahteine
8f0f225d10
Save ABL Planar Matrix to EEPROM
2016-12-15 19:21:15 -08:00
Scott Lahteine
e2429a9da1
Generalize Bed Leveling flag in EEPROM
2016-12-15 19:20:52 -08:00
Scott Lahteine
e42fd7813a
Save ABL Bilinear Grid to EEPROM
2016-12-15 19:20:48 -08:00
Scott Lahteine
492b68f8e3
Better EEPROM read/write error handling
2016-12-15 19:08:44 -08:00
Scott Lahteine
55722c09da
Use "UNPROBED" for un-probed bed_level_grid points
2016-12-15 19:08:44 -08:00
Scott Lahteine
2643404ac8
Throw an error in M420 if can't enable
2016-12-15 19:08:43 -08:00
Scott Lahteine
b1539394fd
Use planner.unapply_leveling to undo tilt in G29
2016-12-15 19:08:43 -08:00
Scott Lahteine
04636f78eb
Re-enable MBL/ABL after M48
2016-12-15 19:08:43 -08:00
Scott Lahteine
9b41638672
Minor tweak to G29 grid points
2016-12-15 19:08:42 -08:00
Scott Lahteine
daa2cad21f
Fix comment on G29 to include 'Z'
2016-12-15 19:08:42 -08:00
Scott Lahteine
8244fefcc2
Tweak call to reset_bed_level
in G29
2016-12-15 19:08:42 -08:00
Scott Lahteine
0995a5d734
Fixup reset_bed_level
2016-12-15 19:08:42 -08:00
Scott Lahteine
1b2fb2bdc7
ABL_GRID_POINTS_* => ABL_GRID_MAX_POINTS_*
2016-12-15 19:08:41 -08:00
esenapaj
d486361c69
Fix for commented section of Config_RetrieveSettings()
2016-12-16 04:34:47 +09:00
esenapaj
88157ba529
Fix for the PR #5255 (Case light menu (3rd attempt))
2016-12-16 00:57:32 +09:00
esenapaj
069c6b38dd
Remove unnecessary tabs and spaces
2016-12-16 00:21:32 +09:00
esenapaj
9c8116aedf
Update Japanese translation
...
・Add new translation
2016-12-16 00:06:58 +09:00
AnHardt
57b1275cde
Add symbol-string to _de
...
Add symbol-string for _de
to reduce the frquencey of regenerating 'mappers' and 'fonts'
with the new utf-system.
2016-12-15 14:37:18 +01:00
android444
3363d2c937
Update for translations language_pl.h
2016-12-14 17:32:33 +01:00
Scott Lahteine
06af3b62ba
Move HOLLOW_FRAME options to config_adv
2016-12-14 04:31:27 -08:00
Scott Lahteine
67ca6c7bfe
Codestyle tweaks to ultralcd.cpp
2016-12-14 04:20:33 -08:00
Scott Lahteine
8d9fcd8e6f
Merge pull request #5495 from AnHardt/autoadjusting_display-updates
...
Adaptive screen updates for all kinds of displays
2016-12-14 04:16:26 -08:00
Scott Lahteine
77a360912d
Merge pull request #5491 from yhfudev/devel-rcbugfix-language-headers
...
UTF-8 language header files
2016-12-14 02:23:09 -08:00
AnHardt
d0e24e0876
Adaptive screen updates for all kinds of displays
...
The target here is to update the screens of graphical and char base
displays as fast as possible, without draining the planner buffer too much.
For that measure the time it takes to draw and transfer one
(partial) screen to the display. Build a max. value from that.
Because ther can be large differences, depending on how much the display
updates are interrupted, the max value is decreased by one ms/s. This way
it can shrink again.
On the other side we keep track on how much time it takes to empty the
planner buffer.
Now we draw the next (partial) display update only then, when we do not
drain the planner buffer to much. We draw only when the time in the
buffer is two times larger than a update takes, or the buffer is empty anyway.
When we have begun to draw a screen we do not wait until the next 100ms
time slot comes. We draw the next partial screen as fast as possible, but
give the system a chance to refill the buffers a bit.
When we see, during drawing a screen, the screen contend has changed,
we stop the current draw and begin to draw the new content from the top.
2016-12-13 18:44:34 +01:00
yhfudev
2dbd38ce16
tag the utf-8 strings
2016-12-13 11:54:35 -05:00
Scott Lahteine
94ffb58da7
Prevent retract un-hop at wrong height
2016-12-13 08:24:12 -08:00
Scott Lahteine
0772c8e55f
Merge pull request #5487 from thinkyhead/rc_easier_move_axis
...
Rearrange Move Menu, Fix up Delta Calibration
2016-12-13 07:07:05 -08:00
Scott Lahteine
b2c8de856b
Merge pull request #5478 from AnHardt/stepspermm
...
Replace ftostr62sign with ftostr62rj
2016-12-13 07:05:42 -08:00
Scott Lahteine
1fd8185d37
Merge pull request #5492 from thinkyhead/rc_fix_language_es
...
Fix multiple definitions of message macros in the language-es.h
2016-12-13 06:57:52 -08:00
yhfudev
1cdffdede7
fix multiple definitions of message macros in the language-es.h
2016-12-13 06:48:38 -08:00
Scott Lahteine
b67f8cb499
Merge pull request #5490 from jbrazio/update-bqhp2
...
Update the bq Hephestos 2 example configuration
2016-12-13 05:04:24 -08:00
Scott Lahteine
93b2833347
Move Menu: Select axis first, resolution after
2016-12-13 03:11:14 -08:00
Scott Lahteine
48aa0f6475
Merge pull request #5475 from AnHardt/utf-mapper-tr
...
utf8-mapper for Turkish
2016-12-13 03:03:22 -08:00
Scott Lahteine
b9ee0d7bd3
Merge pull request #5488 from thinkyhead/rc_fade_compiler_warn
...
Patch fade_factor compiler warning
2016-12-13 03:00:47 -08:00
Scott Lahteine
641e0936d4
Patch up Delta Calibration Menu
2016-12-13 02:42:28 -08:00
Scott Lahteine
b4dbf4d18a
Non-reentrant "Moving..." screen to safely wait in LCD
2016-12-13 02:42:27 -08:00
Scott Lahteine
7b625e0048
Patch fade_factor compiler warning
2016-12-13 02:29:01 -08:00
Scott Lahteine
6fa8fd15e2
Add negative temperatures for Thermistor 1
...
Changes from #5485 by @AndKe
2016-12-13 02:06:16 -08:00
Scott Lahteine
2b5d424394
Use handle_reprapworld_keypad for keypad handling
2016-12-13 01:41:08 -08:00
Scott Lahteine
887ed73c9b
Expose delta_clip_start_height for use by others
2016-12-13 01:41:08 -08:00
João Brázio
3f75edb1d6
Updated bq Hephestos 2 example configuration
2016-12-13 09:26:07 +00:00
Daniel Martinez
b796e7031d
Update Aragonese translation
2016-12-12 17:36:33 -08:00
AnHardt
cd2b74e88d
Replace ftostr62sign with ftostr62rj
...
`ftostr62sign()` is used only when displaing/editing
Steps/mm. A sign is not needed - the value is always positive.
Because the number part is long there is no't much place for the values name.
With this PR the is one more char for the name possible.
2016-12-12 20:25:20 +01:00
AnHardt
795541f87e
utf8-mapper for Turkish
...
The non utf8 version of turkish is a bit unhandy.
Delete `language_tr.h`
Rename `language_tr_utf.h` to `language_tr.h`
Provide a propper utf8-mapper for Turkish and use it.
2016-12-12 15:56:59 +01:00
Scott Lahteine
7c71bb2900
Merge pull request #5471 from thinkyhead/rc_planner_report_m503
...
Patch to show E factors in M503
2016-12-11 17:47:41 -08:00
Scott Lahteine
39401b7472
Patch to show E factors in M503
2016-12-11 17:37:29 -08:00
Scott Lahteine
6b50230022
Merge pull request #5447 from thinkyhead/rc_update_dutch
...
Dutch cleanup, ordering, placeholders
2016-12-10 22:13:20 -08:00
Scott Lahteine
2c97c11731
Merge pull request #5454 from thinkyhead/rc_fix_delta_g29
...
Fix G29 starting height on DELTA
2016-12-10 22:10:33 -08:00
Scott Lahteine
8239c45b30
Merge pull request #5448 from thinkyhead/rc_eeprom_bump
...
EEPROM: Prolong life. Better support for `DISTINCT_E_FACTORS`.
2016-12-10 22:06:00 -08:00
Scott Lahteine
21ed43df5f
New Dutch terms
2016-12-10 21:59:45 -08:00
Scott Lahteine
4bc6536f54
Move to safe zone on DELTA if using do_blocking_move_to*
2016-12-10 21:28:24 -08:00
Scott Lahteine
6f389158d7
Compile less code with EEPROM off
2016-12-09 06:05:32 -08:00
Scott Lahteine
f2301a2a04
Add e-stepper count to EEPROM (for planner vars)
2016-12-09 06:05:31 -08:00
Scott Lahteine
53c9fca0f6
Only write to EEPROM when a byte changes
2016-12-09 06:05:31 -08:00
AnHardt
13eebd11cf
volatile_block_buffer_runtime_us
...
`block_buffer_runtime_us` is mangled in the planner and in the stepper-ISR.
So it needs to be volatile and interrupt protected.
2016-12-09 14:49:02 +01:00
Scott Lahteine
8383f35b40
Merge pull request #5445 from thinkyhead/rc_reduce_jerk_code
...
Slightly shrink jerk and advance code
2016-12-09 02:54:03 -08:00
Gege2B
40453c1b9a
Update french translation (LIGHTS str)
2016-12-09 11:18:29 +01:00
Scott Lahteine
fc2fc828b3
Prettify LIN_ADVANCE code with the positive condition
2016-12-09 00:29:07 -08:00
Scott Lahteine
1929502e15
Add const to some variables
2016-12-09 00:29:06 -08:00
Scott Lahteine
2da4d22520
Pretty up ADVANCE code
2016-12-08 22:51:28 -08:00
Scott Lahteine
af024e1d7c
Pretty up coast / reverse jerk code
2016-12-08 22:50:25 -08:00
Scott Lahteine
3f3b5c86d8
Slightly shrink code for jerk-based reduction of safe_speed
2016-12-08 22:24:29 -08:00
AnHardt
87fe20b5f5
Simplify long_move()
...
We are not really interested in, if there are blocks.
All information we need is in `block_buffer_runtime_us`.
2016-12-09 00:13:35 +01:00
Scott Lahteine
574d9c7d3d
Merge pull request #5432 from Kaibob2/patch-2
...
Update language_de.h
2016-12-08 13:14:04 -08:00
Scott Lahteine
f089279263
Merge pull request #5431 from esenapaj/Suppress-warnings,-etc
...
Suppress warnings, etc
2016-12-08 13:10:12 -08:00
Scott Lahteine
d92ccb230c
Merge pull request #5438 from AnHardt/patch-long_move
...
Patch long_move()
2016-12-08 13:08:36 -08:00
AnHardt
706b240251
Patch long_move()
...
While the last move in the planner_buffer is running
it's duration is already subtracted from block_buffer_runtime_us.
2016-12-08 21:03:26 +01:00
esenapaj
a298a58684
Remove redundant "E"
2016-12-09 02:27:34 +09:00
Kai
390a6d976a
Update language_de.h
...
#define MSG_ENDSTOP_ABORT doesn't fit in Display
See https://github.com/MarlinFirmware/Marlin/issues/5401#issuecomment-265714487
2016-12-08 12:18:19 +01:00
esenapaj
e9393c3634
Suppress warnings, etc
...
・Suppress warnings
・Remove unused variable "did_update"
2016-12-08 17:47:59 +09:00
Scott Lahteine
da6a094424
Sanity-check inverting and pullups for Z probe and Z endstop
...
`Z_MIN_ENDSTOP_INVERTING` must match `Z_MIN_PROBE_ENDSTOP_INVERTING`
when using `Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN`.
This is easy to overlook.
2016-12-08 00:12:19 -08:00
Scott Lahteine
3fb43c11fc
Fix compile error with LCD_I2C_VIKI
2016-12-07 23:29:45 -06:00
Scott Lahteine
aa241c63b3
Include M205 note in configurations
2016-12-07 14:45:44 -06:00
Scott Lahteine
c8a95ec514
Merge pull request #5413 from MagoKimbra/rc_fix_mesh
...
Fix Mesh without Fade Height
2016-12-07 03:16:02 -06:00
Scott Lahteine
35ad9626f1
Merge pull request #5410 from thinkyhead/rc_polish_update
...
Update Polish language, reduce filament change messages
2016-12-07 03:15:53 -06:00
Scott Lahteine
01e5d46ea7
Patch some planner compile errors
2016-12-07 02:26:24 -06:00
MagoKimbra
5383212a28
Fix Mesh without Fade Height
2016-12-07 09:23:42 +01:00
Scott Lahteine
dbe1dc1452
Merge pull request #5406 from Rigid3D/RCBugFix
...
Turkish Translation Update
2016-12-07 00:56:08 -06:00
Scott Lahteine
4783a59249
Remove filament-change empty lines from languages
2016-12-07 00:53:03 -06:00
Scott Lahteine
1705099c3e
Save space by not defining unused filament change message lines
2016-12-07 00:53:03 -06:00
android444
9b1f4b514b
Update Polish language
...
Translation of messages in English to Polish.
2016-12-06 22:28:33 -06:00
Robert Marko
84f7e1de04
Updates to Croatian language
2016-12-06 22:24:12 -06:00
esenapaj
08cdaaf19b
README and Version for 1.1.0-RCBugFix
...
Sync with RC8
2016-12-07 10:43:58 +09:00
Mehmet Sutas
f4663cb677
Update language_tr_utf8.h
2016-12-07 00:21:56 +03:00
Mehmet Sutas
b4fd115d4e
Update language_tr.h
2016-12-07 00:20:07 +03:00
Scott Lahteine
83c5026db1
Ignore homing button when SD printing
...
As suggested in #5404 by @android444
2016-12-06 14:22:34 -06:00
Scott Lahteine
312caef472
Merge pull request #5398 from thinkyhead/rc_croatian_cleanup
...
Fix Croatian spacing, extra #endif
2016-12-06 03:22:19 -06:00
Scott Lahteine
46b65773ea
Fix Croatian spacing, extra #endif
2016-12-06 03:10:37 -06:00
Scott Lahteine
3f2faac9d1
Merge pull request #5388 from thinkyhead/rc_subdivide_bilinear
...
Subdivide Bilinear Grid with Catmull Rom Splines
2016-12-05 20:28:50 -06:00
Scott Lahteine
b5b5edd9ad
Merge pull request #5394 from thinkyhead/rc_drop_board_99
...
Remove mystery-board 99
2016-12-05 20:28:35 -06:00
Scott Lahteine
c48901f355
Remove mystery-board 99
2016-12-05 20:16:50 -06:00
akaJes
d7b948610a
Experimental bilinear subdivision option
2016-12-05 20:11:24 -06:00
Scott Lahteine
6253b765aa
Merge pull request #5389 from thinkyhead/distribute_screen_updates
...
Distribute GLCD screen updates in time
2016-12-05 20:08:33 -06:00
Scott Lahteine
b203901143
Merge pull request #5393 from AnHardt/Fix-auto_report_temperatures
...
Fix auto_report_temperatures()
2016-12-05 19:38:23 -06:00
AnHardt
59a27ed27d
Fix auto_report_temperatures()
...
The `auto_report_temperatures` needs a linefeed to be recognized by Repetier Host.
2016-12-06 01:26:44 +01:00
AnHardt
a6fbd4a5d8
Distribute GLCD screen updates in time
...
Currently we draw and send the screens for a graphical LCD all at once.
We draw in two or four parts but draw them directly behind each other.
For the tested status screen this takes 59-62ms in a single block.
During this time nothing else (except the interrupts) can be done.
When printing a sequence of very short moves the buffer drains - sometimes until it's empty.
This PR splits the screen update into parts.
Currently we have 10 time slots. During the first one the complete screen is drawn. (60,0,0,0,0,0,0,0,0,0,0)
Here i introduce pauses for doing other things. (30,30,0,0,0,0,0,0) or (15,15,15,15,0,0,0,0,0,0)
Drawing in consecutive time slots prevents from lagging too much. Even with a 4 stripe display all the drawing is done after 400ms.
Previous experiments with a even better distribution of the time slots like
(30,0,0,0,0,30,0,0,0,0) and (15,0,15,0,15,0,15,0,0,0) did not feel good when using the menu, because of too much lag.
Because of the previous PRs to speed up the display updates and especially reducing the difference between drawing 2 or 4 stripes,
it now makes sense for the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER to go from 2 to 4 stripes. This costs about 1-2ms per complete
screen update, but is payed back by having partial updates lasting only the half time and two additional brakes. Also ~256 byte of
framebuffer are saved in RAM.
13:45:59.213 : echo: #:17 >:13 s:30; #:16 >:13 s:29; S#:33 S>:26 S:59
13:46:00.213 : echo: #:16 >:14 s:30; #:17 >:13 s:30; S#:33 S>:27 S:60
13:46:01.215 : echo: #:17 >:13 s:30; #:16 >:13 s:29; S#:33 S>:26 S:59
13:46:02.215 : echo: #:16 >:13 s:29; #:16 >:14 s:30; S#:32 S>:27 S:59
13:46:03.214 : echo: #:17 >:13 s:30; #:17 >:13 s:30; S#:34 S>:26 S:60
13:46:04.214 : echo: #:16 >:13 s:29; #:16 >:14 s:30; S#:32 S>:27 S:59
13:46:05.212 : echo: #:16 >:14 s:30; #:17 >:13 s:30; S#:33 S>:27 S:60
13:46:06.212 : echo: #:17 >:13 s:30; #:16 >:13 s:29; S#:33 S>:26 S:59
03:30:36.779 : echo: #:8 >:7 s:15; #:10 >:7 s:17; #:8 >:6 s:14; #:8 >:7 s:15; S#:34 S>:27 S:61
03:30:37.778 : echo: #:8 >:6 s:14; #:10 >:7 s:17; #:9 >:7 s:16; #:8 >:6 s:14; S#:35 S>:26 S:61
03:30:38.778 : echo: #:8 >:6 s:14; #:11 >:7 s:18; #:8 >:6 s:14; #:8 >:7 s:15; S#:35 S>:26 S:61
03:30:39.777 : echo: #:8 >:6 s:14; #:10 >:7 s:17; #:8 >:8 s:16; #:8 >:6 s:14; S#:34 S>:27 S:61
03:30:40.780 : echo: #:8 >:6 s:14; #:11 >:7 s:18; #:8 >:6 s:14; #:8 >:6 s:14; S#:35 S>:25 S:60
03:30:41.780 : echo: #:9 >:6 s:15; #:10 >:7 s:17; #:8 >:6 s:14; #:9 >:6 s:15; S#:36 S>:25 S:61
03:30:42.779 : echo: #:8 >:6 s:14; #:10 >:8 s:18; #:8 >:6 s:14; #:8 >:6 s:14; S#:34 S>:26 S:60
03:30:43.778 : echo: #:9 >:6 s:15; #:10 >:7 s:17; #:8 >:7 s:15; #:9 >:6 s:15; S#:36 S>:26 S:62
#: draw a stripe
>: transfer a stripe
s: sum of of draw and transfer for one stripe
S#: sum of draws for a complete screen
S>: sum of transfers for a complete screen
S: time to draw and transfer a complete screen
2016-12-05 12:22:54 -06:00
Scott Lahteine
f882355994
Merge pull request #5318 from Sebastianv650/Account_for_LCD_improvements
...
Account for LCD improvements in ENSURE_SMOOTH_MOVES
2016-12-05 11:23:58 -06:00
Scott Lahteine
20e834461d
Merge pull request #5385 from thinkyhead/rc_ftostr4sign_decimal
...
Show decimal for small numbers in ftostr4sign
2016-12-05 11:22:45 -06:00
Scott Lahteine
b6b100c471
Merge pull request #5371 from thinkyhead/rc_extruders_can_differ
...
Allow distinct factors for multiple extruders
2016-12-05 11:22:31 -06:00
Scott Lahteine
449d9cbf60
Add placeholders for Polish translatable strings
2016-12-05 10:37:00 -06:00
c64pl
643dc4b64e
Update language_pl.h
...
Fixed translations
2016-12-05 10:37:00 -06:00
Scott Lahteine
0974b75fb6
Merge pull request #5386 from thinkyhead/rc_galician_update
...
Galician language update.
2016-12-05 10:36:26 -06:00
Rafa Couto
2b9115330d
Galician language update.
2016-12-05 10:11:28 -06:00
Scott Lahteine
1f3e2440bc
Merge pull request #5175 from thinkyhead/rc_dualx_homing
...
Unpark when using Z_SAFE_HOMING with Dual X
2016-12-05 10:02:56 -06:00
Scott Lahteine
d5bf1684fe
Implement as optional feature LCD_DECIMAL_SMALL_XY
...
And reduce the function size to simplify
2016-12-05 09:26:05 -06:00
Guthenberg
bfb8d3b53e
Show more decimals in Display, if possible
...
_123, -123, _-12, __-1 plus 1234, 12.3, -1.2
2016-12-05 09:05:46 -06:00
Scott Lahteine
1e30d1da47
Simplify itostr4sign
...
- This function becomes obsolete if ftostr4sign is re-written.
2016-12-05 09:05:46 -06:00
Scott Lahteine
82a187acae
Merge pull request #5359 from AnHardt/update-de
...
Add missing translations to lang-de
2016-12-05 07:31:28 -06:00
Scott Lahteine
4bafdf4b66
Support DISTINCT_E_FACTORS in LCD Motion Menu
2016-12-05 07:26:18 -06:00
Scott Lahteine
3391c785c6
Support for distinct E factors
2016-12-05 07:26:18 -06:00
Scott Lahteine
0dfe95eaba
Adjust formatting in Planner
2016-12-05 07:26:17 -06:00
Scott Lahteine
09587f7c0d
Fix rows error in DOGM
2016-12-05 07:14:11 -06:00