Marlin-Artillery-M600

Archived

Author	SHA1	Message	Date
Scott Lahteine	bb561baf9e	Tweak some config comments	2018-10-04 02:42:12 -05:00
Nils Hasenbanck	fcf6d127fd	STM32 timer simplification (#11995 ) Prescalers aren't calculated for the given target frequency. Stepper timer should run at 2 Mhz and temperature timer at 72 Khz.	2018-10-03 22:33:24 -05:00
Scott Lahteine	8daadd2c8c	Fix TMC_DEBUG undefined report_tmc_status (#11993 )	2018-10-03 11:56:49 -05:00
Scott Lahteine	c40ea1f0fd	Update EEPROM_VERSION And set EEPROM_OFFSET to 0, since the historical 100 skipped bytes are never used.	2018-10-03 11:34:34 -05:00
Scott Lahteine	1358bd9319	Make MAX_EXTRUDERS always 6	2018-10-03 11:32:19 -05:00
AnoNymous	001f26b642	Template struct simplification for serial (#11990 )	2018-10-03 11:01:21 -05:00
Scott Lahteine	348004c34f	STM32F7 HAL using the official STM32 Arduino Core (#11750 )	2018-10-03 03:26:07 -05:00
Scott Lahteine	3e58b3a5d4	Followup to #11943	2018-10-03 02:55:10 -05:00
teemuatlut	c3229e1b34	Migrate to a new TMC library (#11943 )	2018-10-03 02:48:49 -05:00
brian park	2abf3d258d	Korean language translation support (#11987 )	2018-10-03 01:53:34 -05:00
Eduardo José Tagle	d6955f25b2	Expand serial support in DUE/AVR hals exploiting the templated MarlinSerial classes (#11988 )	2018-10-03 00:47:27 -05:00
Eduardo José Tagle	f6f2246f59	Templatized serial classes (#11982 )	2018-10-02 22:15:30 -05:00
Scott Lahteine	ee53f7d813	Revert header reorg.	2018-10-02 22:09:41 -05:00
Scott Lahteine	d619ba2685	Tweak STM32F4 config	2018-10-02 22:03:00 -05:00
LineF	d777cef837	fixed minimum macro (#11986 )	2018-10-02 21:35:34 -05:00
Scott Lahteine	e3f7b69105	Add PROBING_STEPPERS_OFF (#11984 ) Co-Authored-By: houseofbugs <houseofbugs@gmail.com>	2018-10-02 05:13:58 -05:00
Scott Lahteine	0e5bcdf695	Make DISABLE_INACTIVE_EXTRUDER a simple switch	2018-10-02 04:57:03 -05:00
Scott Lahteine	0dedb3e139	Reorganize some core headers (#11983 )	2018-10-02 04:25:46 -05:00
Thomas Moore	ab4549d2bc	[2.0.x] Add simultaneous retraction for mixing extruder (#11941 )	2018-10-01 23:32:02 -05:00
Scott Lahteine	c75f5a376b	Tweak some comments	2018-10-01 18:34:14 -05:00
Scott Lahteine	f4c625d3a1	Ensure MIN/MAX overrides	2018-10-01 05:32:55 -05:00
Scott Lahteine	3019713402	Reorganize some enums	2018-10-01 05:32:55 -05:00
Scott Lahteine	606a4362b3	Reduce STM32F4 compile warnings	2018-10-01 04:41:17 -05:00
Scott Lahteine	b3154b2120	Apply MOVE_Z_WHEN_IDLE to example configurations Co-Authored-By: dot-bob <gibben@gmail.com>	2018-10-01 01:41:11 -05:00
dot-bob	b0fd8f2d74	Add option to move Z on double-click when idle	2018-10-01 01:41:11 -05:00
Scott Lahteine	389376c40e	Clean up softspi.h	2018-10-01 01:29:48 -05:00
Scott Lahteine	e78bdd654d	Clean up BABYSTEP options	2018-10-01 01:29:21 -05:00
InsanityAutomation	8ae113ff36	Show zprobe_zoffset when BABYSTEP_HOTEND_Z_OFFSET is disabled (#11973 )	2018-10-01 00:30:10 -05:00
InsanityAutomation	2e98437392	Clean up main menu (#11972 )	2018-10-01 00:15:06 -05:00
InsanityAutomation	6d862b2916	Home before level corners, if needed (#11976 ) …and add a consistent homing screen for all LCD pre-homing.	2018-10-01 00:14:28 -05:00
Scott Lahteine	11ac75edcb	Use PGM_P for PSTR pointers (#11977 )	2018-09-30 23:44:33 -05:00
InsanityAutomation	4d5566a6b7	Add filament runout sensor menu item (#11971 )	2018-09-30 21:33:46 -05:00
Scott Lahteine	8489673cea	Adjust some HAL formatting	2018-09-30 21:24:37 -05:00
Scott Lahteine	fb8a07660a	Followup to minmax patch Co-Authored-By: Palatis <palatis@gmail.com>	2018-09-30 21:17:31 -05:00
Scott Lahteine	3c40933713	Remove trailing spaces, old comment	2018-09-30 20:47:06 -05:00
Hannes Brandstätter-Müller	a3ec805c97	Anycubic Kossel Linear+: corrected DELTA_DIAGONAL_ROD (#11964 )	2018-09-30 05:41:26 -05:00
AnoNymous	b30ca652ae	Replace MIN# / MAX# with variadic MIN / MAX (#11960 )	2018-09-30 04:59:14 -05:00
Scott Lahteine	e10f730478	Tweak vector_3::apply_rotation	2018-09-30 01:51:33 -05:00
Scott Lahteine	e2ab78d876	Fix SERIAL_PORT_2 sanity check	2018-09-30 00:24:10 -05:00
AnoNymous	a644d8cb93	Avoid copies in vector and matrix (#11959 )	2018-09-29 23:04:40 -05:00
Scott Lahteine	693865a649	Fix some whitespace	2018-09-29 22:36:36 -05:00
Scott Lahteine	9903305dda	Merge pull request #9582 from tcm0116/2.0.x-sensorless_probing [2.0.x] Add TMC2130 sensorless probing	2018-09-29 21:02:22 -05:00
Scott Lahteine	14df753086	Correction for block->mix_steps Fix #11484	2018-09-29 19:13:17 -05:00
Alexander Amelkin	2ecfda80ac	Improve support for JTAG/SWD pins reuse (#11963 ) STM32 can reuse JTAG and SWD pins separately. Add `DISABLE_DEBUG` option to disable both interfaces and retain `DISABLE_JTAG` to disable JTAG only.	2018-09-29 19:00:49 -05:00
Scott Lahteine	bb47009656	Apply sensorless changes to example configs	2018-09-29 18:54:14 -05:00
Thomas Moore	3286325044	Add TMC2130 sensorless probing	2018-09-29 18:54:14 -05:00
Scott Lahteine	7d5c336c56	Corrections for dylsexic TMC	2018-09-29 18:51:11 -05:00
Scott Lahteine	d89d8fe852	Fix Busy State in temperature.cpp Fix #11954	2018-09-29 17:03:35 -05:00
Giuliano Zaro	70e7a465d8	[2.0.x] Fix compile error (#11951 ) Fix compile error intruduced with M109 modification	2018-09-29 13:48:23 -05:00
Hannes Brandstätter-Müller	935b120949	Anycubic Kossel: probe closer to the edge (#11950 )	2018-09-29 02:26:16 -05:00
Scott Lahteine	1410e79e7f	Ensure M109 handles autotemp	2018-09-29 02:12:06 -05:00
Scott Lahteine	e4389f7d23	Standard methods to wait for heating (#11949 )	2018-09-29 01:44:47 -05:00
Scott Lahteine	bdc9889d3a	Fix a sanity check	2018-09-29 00:24:25 -05:00
Scott Lahteine	321f9140d1	Followup to #11904	2018-09-28 20:04:40 -05:00
InsanityAutomation	23114aeb81	Fix garbled M119 output. Honor NUM_RUNOUT_SENSORS (#11948 )	2018-09-28 19:00:11 -05:00
Scott Lahteine	1667ed9d1c	Pause should use ECHOLNPGM	2018-09-28 18:15:38 -05:00
Victor Tseng	93839e2f73	Add option to enable/disable autoretract altogether (#11904 )	2018-09-28 16:52:56 -05:00
Scott Lahteine	ad21a4f07b	Tweaks to HAL format and order	2018-09-28 15:59:50 -05:00
Scott Lahteine	b682a1961a	Tweak STM32F7 TMC2660 class	2018-09-27 21:13:15 -05:00
Scott Lahteine	a0a3b23e35	Reduce Raptor bootscreen by 144 bytes	2018-09-27 18:24:40 -05:00
InsanityAutomation	95d793456b	Add Formbot Raptor config, fix other Formbot configs (#11926 )	2018-09-27 19:20:43 -04:00
Mitch Roote	d016b572e3	[2.0.x] Add pin configuration for Fysetc F6 (#11932 )	2018-09-27 19:20:19 -04:00
Alexander Amelkin	84926b1d5a	HAL general support for DISABLE_JTAG option (#11211 ) Some STM32-based boards may use multiplexed JTAG pins as IO. Up to now the `DISABLE_JTAG` option (defined in pins files) was only supported for AT90-based boards. This commit generalizes the code and adds support for boards based on STM32F1 and STM32F4.	2018-09-27 19:02:50 -04:00
Scott Lahteine	c575c5d5f6	Bring example configs up to date (#11939 )	2018-09-27 18:47:26 -04:00
Scott Lahteine	6b1a4f30a8	Fix case of T-Rex 3 _Statusscreen.h	2018-09-27 17:00:55 -05:00
Scott Lahteine	ab7bfa86e2	Fix case of T-Rex-3 _Statusscreen.h	2018-09-27 17:00:55 -05:00
Scott Lahteine	241168926d	Update some configs	2018-09-27 16:42:59 -05:00
Scott Lahteine	cb6454118c	Workaround for Pronterface M29	2018-09-27 16:27:02 -05:00
Victor Tseng	eeab4141db	[2.0.x] Anycubic Trigorilla 14 pins tweak (#11869 )	2018-09-27 16:06:21 -04:00
InsanityAutomation	cb9dc56630	Add GT2560 v3 support (#11914 )	2018-09-27 15:13:15 -04:00
InsanityAutomation	f2e630a05e	Stow probe on probing failed (#11936 ) Prevents probe from being left down should probing fail and print job continue	2018-09-27 13:26:14 -04:00
Hannes Brandstätter-Müller	0b602ae101	[2.0.x] Fix Anycubic Kossel with Probe V1, stuck LCD message after stow (#11929 )	2018-09-27 13:23:53 -04:00
Giuliano Zaro	dc11131656	[2.0.x] fix possible race condition (#11923 ) Fix some commits done in #11900	2018-09-25 13:56:57 -04:00
Scott Lahteine	d6b9327c11	Followup for Endstop Noise Threshold Followup to #11912	2018-09-25 13:50:49 -04:00
Scott Lahteine	aa6e8e9325	Tweak some config comments	2018-09-25 13:42:28 -04:00
Scott Lahteine	5490a664f5	Expose: Homing Validation and Endstop Noise Threshold (#11912 )	2018-09-24 21:59:12 -04:00
Scott Lahteine	cee34f7290	Followup for BABYSTEP_HOTEND_Z_OFFSET (#11916 )	2018-09-24 21:46:56 -04:00
teemuatlut	884ad75cb8	Update config files	2018-09-24 17:26:18 -04:00
Giuliano Zaro	18e456d38d	[2.0.x] fix home endstop bug (DON'T MERGE, needs discussion) (#11900 )	2018-09-24 16:56:01 -04:00
Scott Lahteine	6742026568	Followup for 6 extruders	2018-09-24 14:36:50 -04:00
Scott Lahteine	04bdff4115	Add a blank line	2018-09-24 12:49:02 -04:00
Marcio Teixeira	ccbd045f02	Fixed warning about comparing signed to unsigned (#11909 )	2018-09-24 12:03:29 -04:00
InsanityAutomation	1104054d73	2.0 IDEX Independent z offset and other fixes (#11862 ) * Add Formbot Raptor board Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com> * Add a second Z probe Z offset Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com> * Modify method to utilize live adjustment of hotend z offset Should probably move config option to babystepping and rename as it may now apply to all multiextruder systems * Move config item and catchup other code to current method	2018-09-24 09:40:48 -05:00
Scott Lahteine	217e0efd20	General option PAUSE_BEFORE_DEPLOY_STOW (#11905 )	2018-09-24 00:43:43 -04:00
Scott Lahteine	849dea92a8	Move probe extras below probe types	2018-09-23 23:23:07 -04:00
Scott Lahteine	a2b0260f0f	Update Sublime files	2018-09-23 19:59:08 -04:00
Hannes Brandstätter-Müller	a4cdffdd69	Support for manually deployed fixed probes (#11899 )	2018-09-23 19:59:08 -04:00
Scott Lahteine	ddcbf80f23	Followup for Z_TRIPLE_ENDSTOPS	2018-09-23 12:22:31 -04:00
Marcio Teixeira	c411e7eb0d	[2.0.x] Squelch compiler warnings seen with -Wall (#11889 )	2018-09-23 12:00:34 -04:00
Roxy-3D	83105590a0	Better default values for Mesh Inset	2018-09-22 03:25:18 -04:00
Roxy-3D	4163c1a514	Fix end stop and Z-probe reporting logic	2018-09-22 03:25:18 -04:00
Scott Lahteine	ea9eb2fc8f	Fix servo angles in config-store	2018-09-21 15:41:36 -04:00
Roxy-3D	d3d6be8210	Add MAX7219 reverse units option (#11860 )	2018-09-19 18:54:51 -05:00
Scott Lahteine	beab9733f8	Remove extra clauses in config-store	2018-09-19 17:06:51 -05:00
Scott Lahteine	5a74b12b45	Followup to #11769	2018-09-19 16:40:32 -05:00
InsanityAutomation	f38570ac55	Add custom user menu title (#11769 )	2018-09-19 15:04:34 -05:00
Scott Lahteine	17494099a9	Fix parking_extruder_tool_change Fix #11872	2018-09-19 03:02:07 -05:00
Scott Alfter	140caf99b8	E0_CS_PIN moved from A13 to A15 on RAMPS-FD v2.2 (#11865 )	2018-09-18 22:24:20 -05:00
Scott Lahteine	10590c2f80	Fix some fan conditionals	2018-09-18 21:23:33 -05:00
Scott Lahteine	e4ee607fc8	Fix Dual X FRS in M600 Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>	2018-09-18 21:23:33 -05:00
Scott Lahteine	bae8f82ba8	[2.0] Fix Mixing Extruder mixing factors (#11861 )	2018-09-18 01:10:41 -05:00
Scott Lahteine	c5e5cc5e9f	Fix some trailing whitespace, macros	2018-09-17 17:30:04 -05:00
AnHardt	54bd124665	2.0.x: Fix normalize_mix() (#11856 ) Mix factors needed to be updated consistent with the recent Stepper/Planner code refactor.	2018-09-17 16:37:38 -05:00
Roxy-3D	5fbfbde532	Fix example file to pull in correct pins file	2018-09-17 10:41:30 -05:00
Roxy-3D	378f354939	IDEX Scaled Duplication is still under development Take it out of the menu until it is tested and working.	2018-09-17 10:26:44 -05:00
Scott Lahteine	65045ba54b	tmc_util fix part 2 Followup to `115abf9`	2018-09-17 05:36:17 -05:00
Scott Lahteine	09a2bee8aa	Support more filament runout sensors in M119 (#11851 )	2018-09-17 03:27:13 -05:00
Scott Lahteine	115abf9c53	Fix syntax error in front of `tmc_axes`	2018-09-17 01:10:20 -05:00
Roxy-3D	0780913848	IDEX Improvements (#11848 )	2018-09-17 01:06:22 -05:00
Scott Lahteine	39732838b4	Tweak indent of Chinese languages	2018-09-17 00:58:32 -05:00
Scott Lahteine	53bd0b55cb	Followup for 6 extruders	2018-09-16 23:57:50 -05:00
Scott Lahteine	1718eff54a	Code changes supporting up to 6 extruders	2018-09-16 22:32:53 -05:00
Scott Lahteine	f5c210d33d	Config changes supporting up to 6 extruders	2018-09-16 22:22:35 -05:00
Scott Lahteine	d948c6e867	RADDS Extension Board V3 support	2018-09-16 22:22:35 -05:00
Thomas Moore	c437bb08f1	Overhaul of the planner (#11578 ) - Move FWRETRACT to the planner - Combine leveling, skew, etc. in a single modifier method - Have kinematic and non-kinematic moves call one planner method	2018-09-16 21:24:15 -05:00
Scott Lahteine	8323a08642	Clean up some whitespace	2018-09-16 19:44:21 -05:00
Scott Lahteine	6286afd456	Add Triple-Z options to example configs	2018-09-16 00:35:58 -05:00
Holger Müller	1a6f2b29b8	Add support for Triple-Z steppers/endstops	2018-09-16 00:35:58 -05:00
Hannes Brandstätter-Müller	bc06406d7d	Fix Anycubic Kossel config (probe crash) (#11832 )	2018-09-15 23:27:21 -05:00
Scott Lahteine	66f83d33e6	Fix some config comments	2018-09-15 23:21:55 -05:00
Hannes Brandstätter-Müller	84ed9b5a63	Send "G33 S P1" for Delta Height Calibration (#11831 )	2018-09-15 20:17:35 -05:00
Scott Lahteine	215eee4fe5	Use 'friend' to access set_directions	2018-09-15 20:11:10 -05:00
Cassiano Leal	ff51e7322d	Fix for Stepper::set_directions() compilation error (#11838 )	2018-09-15 19:31:51 -05:00
Scott Lahteine	809b232fa2	Fix stepper directions after M501/M502 See https://github.com/MarlinFirmware/Marlin/issues/11103#issuecomment-421387611 Co-Authored-By: tcm0116 <tcm0116@users.noreply.github.com>	2018-09-14 20:00:55 -05:00
Scott Lahteine	f79a5a9dee	Tweak spacing of L6470 options	2018-09-12 23:18:11 -05:00
Hannes Brandstätter-Müller	c37d3ae97d	[2.0.x] Fix NOZZLE_PARK_FEATURE for Anycubic Kossel (#11812 )	2018-09-12 15:37:38 -05:00
HenningJW	4fb2134f00	Fix non-sensical values for Zonestar themistor table (#11817 ) Values taken from Zonestar firmware for P802QA with a Melzi board. Timestamps from the firmware package are from April 2016.	2018-09-12 15:36:04 -05:00
Scott Lahteine	b220a825a7	Fix raw_filwidth_value error	2018-09-12 04:31:55 -05:00
Scott Lahteine	1933d5d6fb	Fix SD autostart with no LCD	2018-09-12 03:49:59 -05:00
Roman Moravčík	8bce5370c7	Updated slovak translation (#11807 )	2018-09-12 03:29:17 -05:00
Giuliano Zaro	64d629ba2a	[2.0.x] Italian language fix (#11796 )	2018-09-12 03:28:22 -05:00
Scott Lahteine	8584d3697d	Fix servo count define conflict `MAX_SERVOS` => `NUM_SERVO_PLUGS`	2018-09-11 16:20:31 -05:00
Scott Lahteine	06949ae510	Fix MSG_FILAMENT_CHANGE_HEAT_1 for small LCD	2018-09-10 23:21:37 -05:00
Scott Lahteine	d882717d98	Save some PROGMEM with constexpr (#11798 ) When possible, make `active_extruder` a `constexpr` to save some PROGMEM.	2018-09-10 23:09:26 -05:00
Sam Lane	4f883d5971	[2.0.x] Extruder-Distinct Linear Advance K Factors (#11789 )	2018-09-10 22:37:32 -05:00
Scott Lahteine	fe9f088d60	[2.0.x] Anycubic LinearPlus, Trigorilla 1.4 (#11730 )	2018-09-10 21:25:40 -05:00
Scott Lahteine	b6aae2b322	Tweak RAMPS_FD_V1 pins	2018-09-10 15:43:03 -05:00
Scott Lahteine	7391e23332	Fix RigidBoard FAN_PIN collision	2018-09-10 05:29:00 -05:00
Scott Lahteine	53b8c3bd66	Add EXTERNAL_CLOSED_LOOP_CONTROLLER to examples	2018-09-10 03:17:17 -05:00
Sam Lane	1b6bc19427	Add external closed loop controller support	2018-09-10 03:17:17 -05:00
Marcio Teixeira	2ebfe90be9	Add custom preheat temp to filament change (#11475 )	2018-09-10 02:51:46 -05:00
Karl Andersson	69d0ed5791	[2.0.x] Fix ambiguous function call (SERIAL_PROTOCOL_F) when using Arduino_Core_STM32 (#11747 )	2018-09-10 02:36:06 -05:00
Scott Lahteine	d32c4efc77	Fix some trailing whitespace	2018-09-10 01:26:20 -05:00
Alexander Amelkin	bc1ba998b2	[2.0.x] Fix undefined symbol 'g29_in_progress' (#11781 )	2018-09-09 22:06:03 -05:00
InsanityAutomation	bad225dc04	Fix mesh leveling compile errors (#11768 )	2018-09-09 04:19:48 -05:00
Sam Lane	d783400330	Updates to STM32F7 HAL, for completeness (#11770 )	2018-09-09 03:26:15 -05:00
Scott Lahteine	72af8e0f02	Patch extruder_advance_K edit menu Fix #11776	2018-09-09 03:21:08 -05:00
Sebastianv650	7e8c073fba	Fix extruder stops extruding with LA (#11758 )	2018-09-09 00:04:14 -05:00
Scott Lahteine	0c01099f17	hop_amount => current_hop	2018-09-08 21:20:37 -05:00
Scott Lahteine	eafd62308e	Use TMC2208Stepper v0.2.5 (#11714 )	2018-09-08 20:41:21 -05:00
Kevin	e25d2ae4a2	[2.0.x] SWITCHING_TOOLHEAD (#11623 )	2018-09-08 01:43:24 -05:00
Alexander Amelkin	f417408df1	[STM32F1] Fix HAL for new PlatformIO (#11749 )	2018-09-07 18:15:32 -05:00
Roxy-3D	3d7f2c1fde	Fix directory name to be consistent (#11745 )	2018-09-06 14:10:40 -05:00
Roxy-3D	a9c98a0e47	Create _Bootscreen.h	2018-09-06 10:24:03 -05:00
Roxy-3D	9f85d3a9cb	Create _statusscreen.h	2018-09-06 10:23:20 -05:00
Roxy-3D	e2e7b1d705	Break out support of the T-Rex 3	2018-09-06 10:20:20 -05:00
Roxy-3D	67996c2b66	Break out support for the T-Rex 3	2018-09-06 10:19:05 -05:00
Roxy-3D	9c8d9d282f	Break out support for Formbot T-Rex3 from previous versions	2018-09-06 09:49:04 -05:00
Roxy-3D	e3aac59637	Create pins_FORMBOT_TREX3.h	2018-09-06 09:46:23 -05:00
Roxy-3D	f580247581	Create pins_FORMBOT_TREX2.h	2018-09-06 09:45:29 -05:00
Roxy-3D	073857646b	seperate the T-Rex2 and T-Rex3 support	2018-09-06 09:43:43 -05:00
Roxy-3D	fe4fc2883b	Add support for Formbot T-Rex3	2018-09-06 09:41:59 -05:00
Scott Lahteine	2a61c9a939	Various fixups to configs, spacing, etc.	2018-09-06 06:44:31 -05:00
Scott Lahteine	b3efbc6e6e	Add MANUAL_E_MOVES_RELATIVE to more configs	2018-09-06 02:09:14 -05:00
Scott Lahteine	679e4602fe	Add MANUAL_E_MOVES_RELATIVE to examples	2018-09-06 02:00:25 -05:00
Marcio Teixeira	beb51c2d58	Show manual extrusion moves as relative in LCD - Implements FR#11724 - Old behavior can be restored by commenting out MANUAL_E_MOVES_RELATIVE	2018-09-06 02:00:25 -05:00
Scott Lahteine	d10f29ae2e	Pass segment length in G2-G3	2018-09-06 01:43:27 -05:00
Scott Lahteine	dcfde2317f	Pass segment length in prepare_kinematic_move_to (#11737 )	2018-09-06 01:40:22 -05:00
Roxy-3D	d5379ee9d6	Fix search for white space in enqueued commands	2018-09-05 16:57:08 -05:00
Roxy-3D	8d5bea073b	Assume one Max7219 unit if not specified	2018-09-05 14:18:13 -05:00
Roxy-3D	9651ceb36b	Correct spelling of #endif	2018-09-05 10:46:08 -05:00
Scott Lahteine	b213a89ef5	Sanity-check NOZZLE_PARK_POINT	2018-09-05 06:18:08 -05:00
Scott Lahteine	86ee74731e	Comment for RADDS + RRDFGSC	2018-09-05 05:45:17 -05:00
Kevin	ae1271b2ae	RADDS: Update Full Graphic Display Pins (#11731 )	2018-09-05 03:51:54 -05:00
Scott Lahteine	650d4313c4	Bring some configs up to date	2018-09-05 03:49:24 -05:00
AnHardt	530a13ab6c	[2.0.x] SECURITYFIX missing max temp error when PID is used (#11717 )	2018-09-05 01:41:45 -05:00
Scott Lahteine	12fded46c2	Correct some FR strings Co-Authored-By: pipersw <pipersw@users.noreply.github.com>	2018-09-04 04:00:22 -05:00
Michael Triffon	aefc2f7cf9	Add Anet A2 and A2 Plus Configurations (#11677 )	2018-09-03 23:38:51 -05:00
scott0122	72fdb6bab3	Fix SWITCHING_NOZZLE zdiff (#11683 )	2018-09-03 23:24:40 -05:00
Scott Lahteine	8b837dc3ad	No need for last \n in G-code items	2018-09-03 23:23:20 -05:00
Scott Lahteine	d1ceaf5550	[2.0.x] Followup to IDEX changes (#11707 )	2018-09-03 23:15:31 -05:00
Roxy-3D	d62f4df0b7	Disable LCD Pins used by new Max7219 hook up if in that mode	2018-09-03 09:56:25 -05:00
Roxy-3D	fa772c31bf	Provide more options for Max7219 connection on Formbot	2018-09-03 09:52:36 -05:00
Scott Lahteine	8e18e48d49	Merge pull request #11610 from Freeviv/bugfix-2.0.x [2.0.x] Editable servo angles	2018-09-03 03:55:38 -05:00
Giuliano Zaro	59e76e5fdf	[2.0.x] Fix planner computation (#11708 ) Fix #11697	2018-09-03 00:29:29 -05:00
Roxy-3D	509ee44611	Boot and status file should not have been added to main directory!	2018-09-02 10:25:36 -05:00
Roxy-3D	f8abe12a9c	Boot and status file should not have been added to main directory!	2018-09-02 10:25:13 -05:00
Roxy-3D	7680b64aa6	IDEX clean up (#11690 )	2018-09-02 10:18:59 -05:00
teemuatlut	49e107cea9	Restrict SW serial to AVR (#11696 )	2018-09-01 15:24:44 -05:00
Scott Lahteine	18f1af2dca	Fix up Teensy tests, servo sanity	2018-09-01 01:10:20 -05:00
Scott Lahteine	74a04aed55	Fix compile error with NO_LCD_MENUS	2018-08-31 19:16:04 -05:00
Scott Lahteine	509e1cf2bd	Add *_DRIVER_TYPE to remaining configs	2018-08-31 19:07:17 -05:00
Scott Lahteine	d55f44edba	Printcounter improvements (#11689 )	2018-08-31 17:40:39 -05:00
Scott Lahteine	6a3207391f	Remove obsolete HAL_timer_restrain	2018-08-31 16:17:22 -05:00
Scott Lahteine	e3fc9aa35f	Update some config comments	2018-08-31 16:03:44 -05:00
Scott Lahteine	136860e8bb	Sanity-check SERVO pin for servo probes	2018-08-31 15:47:47 -05:00
Roman Moravčík	66de50f5f8	Updated slovak translation (#11684 )	2018-08-31 15:37:49 -05:00
scott0122	ada85d5585	Improve HOTEND OFFSET Z display precision to 3 (#11686 )	2018-08-31 15:15:40 -05:00
scott0122	607c1e58d9	Improve HOTEND OFFSET Z display precision to 3 (#11685 )	2018-08-31 15:14:33 -05:00
Scott Lahteine	3e81745e81	Fix issues, make optional	2018-08-29 17:58:02 -05:00
Jan	aa80e448e2	Store servo angles in EEPROM	2018-08-29 17:58:02 -05:00
Scott Lahteine	9953213513	Add EDITABLE_SERVO_ANGLES to example configs	2018-08-29 17:57:52 -05:00
Marcio Teixeira	0966bdcbc4	Reorganized ultralcd menu (10317) (#10360 ) Replaced "Prepare" and "Control" menus with "Movement", "Temperature", "Configuration" and "Advanced Settings"	2018-08-29 16:51:14 -05:00
Scott Lahteine	e40a3eef04	Support for Anet A2 Plus	2018-08-29 03:39:43 -05:00
Scott Lahteine	32e38fee74	Update Controller Fan for Y2,Z2	2018-08-29 01:49:48 -05:00
Jeonghwan Roh	59cf217e77	Fix 5 mixing steppers	2018-08-29 01:49:48 -05:00
Scott Lahteine	2a2e8c314e	Suppress emergency parser G-code errors Co-Authored-By: srieche <srieche@users.noreply.github.com>	2018-08-29 01:04:55 -05:00
Ilya Bukhonin	7ecb8b4af5	[2.0.x] Teensy 3.1 and 3.2 support (#11460 )	2018-08-27 21:49:49 -05:00
Pablo Crespo	409a0632af	[2.0.x] Add Morpheus Board support (#11651 )	2018-08-27 21:28:03 -05:00
Marcio Teixeira	0f14977b5d	LIGHTWEIGHT_UI: Allow feedrate % to exceed 255% (#11656 ) - Changed type of integer used for feedrate percentage from uint8_t to uint16_t.	2018-08-27 21:26:32 -05:00
scott0122	6dc9553aa5	Fix SWITCHING_NOZZLE compile error (#11657 )	2018-08-27 21:25:25 -05:00
Scott Lahteine	a15e570d3b	Fix SD progress with Lite Status Screen Co-Authored-By: Lê Hoàng <icy.lord.love.angel@gmail.com>	2018-08-26 17:12:05 -05:00
Scott Lahteine	66966dbd69	Tweak comments for newer multiplexer	2018-08-25 17:00:49 -05:00
Scott Lahteine	933d833ec8	Tweak some Anet A6 comments	2018-08-24 21:50:53 -05:00
Scott Lahteine	d1c9517903	Followup to hotend_offset[Z] patch	2018-08-24 21:32:00 -05:00
Scott Lahteine	e2b8fc4f17	Reduce some debug strings	2018-08-24 21:11:39 -05:00
Chris Pepper	b71c2b8651	[2.0.x] Update LPC176x tests, fix clean script (#11617 )	2018-08-24 18:53:24 -05:00
Scott Lahteine	a317bb4991	Remove stray tab	2018-08-24 17:35:13 -05:00
Scott Lahteine	acf5ae3083	!ENABLED => DISABLED	2018-08-24 16:36:37 -05:00
Scott Lahteine	ba1919c1eb	HAL tweaks to LPC1768 main	2018-08-22 17:16:18 -05:00
Scott Lahteine	0987ed2a18	Use American English	2018-08-22 17:16:18 -05:00
Kevin	6483285bc5	HOTEND_OFFSET_Z always available (#11603 )	2018-08-22 00:21:29 -05:00
Michael Triffon	f8c52c9c29	Azteeg X5 Mini WiFi support (#11601 )	2018-08-21 23:58:26 -05:00
jneilliii	3671c63cde	Einsy Full Graphic LCD Fix (#11604 ) Fixed issue with LCD timings for Einsy RAMBo board.	2018-08-21 23:43:52 -05:00
Colin Gilgenbach	593d5375ea	Fix G28 resetting DUAL_NOZZLE_DUPLICATION_MODE (#11605 ) There's no reason for G28 to reset DUAL_NOZZLE_DUPLICATION_MODE, because it only affects the E stepper, unlike DUAL_X_CARRIAGE which affects the X steppers as well.	2018-08-21 23:42:55 -05:00
Scott Lahteine	f0dbe61692	Tweaks to motion.h reachable tests	2018-08-21 23:34:29 -05:00
Scott Lahteine	2d3317a35b	Prettify Dual X Carriage description	2018-08-21 23:34:29 -05:00
Roxy-3D	cd9868f442	Make position_is_reachable() smarter about IDEX machines` On many IDEX machines the allowed travel of the X1 carraige and X2 carraige does not perfectly overlap. This helps the issue. But more work needs to be done at the higher level. (For example the X1_MAX_POS should probably be factored into G26's mesh validation pattern.)	2018-08-21 19:12:26 -05:00
Scott Lahteine	97f6396b25	Fix RE_ARM LCD pins to avoid #undef	2018-08-21 12:47:40 -05:00
Scott Lahteine	0e25f66c09	Fix Ultimaker servo pin As pointed out at https://github.com/MarlinFirmware/Marlin/issues/7981#issuecomment-407116642	2018-08-21 11:39:53 -05:00
Scott Lahteine	ad12b9b46b	Fix indentation, whitespace, spelling, formbot pins...	2018-08-21 09:47:57 -05:00
Scott Alfter	b5537dde7f	need to add E2END to pins_RAMPS_FD_V2.h (#11564 )	2018-08-21 02:16:31 -05:00
Scott Lahteine	8f0bbdcc9b	Fix up Max7219 orientations (#11596 )	2018-08-21 02:06:18 -05:00
jmz52	a77f8c6dd5	Implement servo support for STM32F1 (#11580 ) Implement servo support for STM32F1. Original code was incomplete and depended on Servo library from stm32duino which conflicts with `module/servo.h`.	2018-08-20 21:13:51 -05:00
Dave Johnson	0456caf0ad	Consolidate shared HALs and isolate HAL compile (#11552 )	2018-08-20 21:11:12 -05:00
jmz52	dfe18ac633	Fix compilation error for STM32F1 with U8GLIB_SSD1306 or U8GLIB_SH1106 enabled (#11583 ) The `binary.h` file required by `lcd/dogm/dogm_bitmaps.h` is not present in stm32duino environment. Binary macros are defined in `bit_constants.h` in stm32duino framework.	2018-08-20 20:37:56 -05:00
Roxy-3D	b0a8ce59bd	Update Boards.h to include Formbot support	2018-08-20 16:46:27 -05:00
Roxy-3D	62ce937540	Update pins.h to include the Formbot board	2018-08-20 16:44:54 -05:00
Roxy-3D	a82be36d5d	Create pins_FORMBOT.h	2018-08-20 16:43:42 -05:00
ghent360	00d24a8219	Don't call __delay_4cycles for 0 cycle delay - takes a really long time. (#11586 )	2018-08-18 22:50:11 -05:00
Scott Lahteine	56f1e17a25	[2.0.x] Max7219 cleanup, simplify, and extend (#11575 )	2018-08-18 01:33:13 -05:00
jmz52	0b2d686160	Fix "SD init fail" problem for STM32F1 (#11579 ) Fix "SD init fail" problem for STM32F1 caused by incorrect SS pin state and incorrect SPI mode. Issue #11225	2018-08-17 23:27:10 -05:00
Scott Lahteine	a98f21ec5e	Marlin assumes signed chars	2018-08-16 22:52:42 -05:00
Kevin	db30650731	Fix UBL/Homing (#11566 )	2018-08-16 08:28:40 -05:00
Roxy-3D	aae4c67e5d	Max7219 Clean Up (#11563 ) Some of the Rotations did not do the right thing with setting and clearing pixels. I think it is correct now. But if not... It is much closer to being correct.	2018-08-15 21:22:28 -05:00
InsanityAutomation	9de730b2bf	Update tool_change.cpp (#11559 )	2018-08-15 19:30:52 -05:00
InsanityAutomation	c2553f9888	2.0.x - Idex match119 (#11556 ) * Update ubl_G29.cpp * Update ultralcd.cpp	2018-08-15 13:26:11 -05:00
Roxy-3D	e9de321ac0	declare void Max7219_register_setup();	2018-08-15 10:36:51 -05:00
Scott Lahteine	952a1bc9d5	Merge pull request #11551 from thinkyhead/bf2_trinamic_fixes [2.0.x] Fix TMC2208 SW serial communication	2018-08-14 19:07:08 -05:00
petrzjunior	67613bf5bd	Update Czech translations (#11510 )	2018-08-14 18:45:16 -05:00
Scott Lahteine	bd6d032628	Update default driver configuration Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>	2018-08-14 18:42:04 -05:00
Scott Lahteine	1561e61df7	New TMC2208 constructor Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>	2018-08-14 18:41:51 -05:00
Nils Hasenbanck	b37bfeffeb	[2.0.x] Use the new const functions of the persistentStore api (#11544 )	2018-08-14 18:35:36 -05:00
Chris Pepper	5573ef62c6	[2.0.x] PersistentStore update followup (#11549 )	2018-08-14 17:54:12 -05:00
Scott Lahteine	846bd24eb9	MALYAN_LCD is ok without SD	2018-08-14 05:31:47 -05:00
Scott Lahteine	834ea7fcea	Remove 'const' from PersistentStore::capacity	2018-08-14 04:46:10 -05:00
Dave Johnson	c64199941e	Compile only selected PIO environment (#11519 )	2018-08-14 03:28:52 -05:00
Andy Shaw	5be2559eda	Use flash memory to emulate EEPROM (#11500 ) Use a sector of the LPC flash memory to emulate EEPROM storage, removing the need to have an SD card to store system parameters.	2018-08-14 01:19:34 -05:00
Scott Lahteine	6964e1a95a	Clean up trailing whitespace	2018-08-14 00:55:37 -05:00
Scott Lahteine	865ee5985f	Followup persistent store with heading, const	2018-08-13 23:55:33 -05:00
Scott Lahteine	a4b0148365	Easier to find 'static inline'	2018-08-13 23:55:33 -05:00
Scott Lahteine	cc0a60453f	Merge pull request #11526 from hasenbanck/eeprom-cleanup [2.0.x] Change direct eeprom access to HAL::PersistentStore	2018-08-13 19:45:10 -05:00
Roxy-3D	65c5227c29	Change M7219 I to setup Max7219 registers, but not do initialization pattern	2018-08-13 17:46:48 -05:00
Nils Hasenbanck	577aeb4aa9	All EEPROM access uses persistentStore	2018-08-13 17:43:35 -05:00
Scott Lahteine	6a8b906318	Followup for persistent_store_api.h	2018-08-13 17:43:35 -05:00
Chris Pepper	66d2b48b59	Update PersistentStore api (#11538 ) - Clean up the API to use a `static` class instance to adhere to Marlin convention - Add `const` position data access for read/write - Add Storage capacity to the interface	2018-08-13 17:30:25 -05:00
Roxy-3D	60f1376798	Make M7219 I more robust and nice to look at Make M2719 initialize the Max7219 registers and then run the initialization pattern (if one is specified).	2018-08-13 16:59:25 -05:00
Roxy-3D	fd15b1495a	add I parameter to M42 to allow access to sensitive pins	2018-08-13 16:57:09 -05:00
Scott Lahteine	11b411a872	Improve AXIS_DRIVER_TYPE macros	2018-08-13 16:57:09 -05:00
Scott Lahteine	f1347f783d	Optimize thermistor table 71 agData in Table 71 is extremely oversampled (see Issue #11220). I have removed the data points that perform worse than linearly interpolating the remaining points, and fixed up two points that were simply rounded incorrectly. Co-Authored-By: Aaron Griffith <aargri@gmail.com>	2018-08-13 02:54:55 -05:00
Scott Lahteine	0bda22367b	Allow Einsy RAMBo FAN1_PIN override	2018-08-13 02:49:30 -05:00
Scott Lahteine	1b921b246b	Fix pca9632_set_led_color …when used with an I2C screen. Co-Authored-By: soimy <soimy@163.com>	2018-08-13 02:40:22 -05:00
Scott Lahteine	aa9d329560	Reduce max accel in Creality configs	2018-08-11 22:56:51 -05:00
Scott Lahteine	c93538e9f3	UBL/planner patch tweaks	2018-08-11 22:50:45 -05:00
Scott Lahteine	0af22549a6	Allow G33 to compile with no LCD	2018-08-11 22:32:09 -05:00
Thomas Moore	fc55f1da01	Account for UBL correction when setting the planner position (#11486 )	2018-08-10 13:00:50 -05:00
Scott Lahteine	b328fb4dc9	Treat TMC2660 like non-TMC (#11508 )	2018-08-10 00:30:28 -05:00
Scott Lahteine	72b086b90d	Add A5984 to example configurations	2018-08-09 23:04:27 -05:00
Greg Nutt	a1a5367380	Smoothieboard V1.0/1.1 and A5984 support	2018-08-09 23:03:17 -05:00
Scott Lahteine	f891416e70	No raise on G28 after power-loss	2018-08-07 13:51:36 -05:00
Scott Lahteine	e4ecade8d4	Fix AUTO_POWER_CONTROL compile error Counterpart to #11467 Co-Authored-By: lsellens <lsellens@users.noreply.github.com>	2018-08-06 23:20:51 -05:00
Giuliano	eee1b7c50c	[2.0.x] Fix compile error (#11465 ) Address #11463	2018-08-06 23:14:53 -05:00
Giuliano	e85feb2545	[2.0.x] Better timing handling (#11461 )	2018-08-06 23:13:36 -05:00
Scott Lahteine	79835590e3	Easier to disable homing validation (#11458 )	2018-08-06 23:11:37 -05:00
Scott Lahteine	131d216afa	Fix drivers.h dependency, defer macro evaluation (#11450 )	2018-08-03 21:49:04 -05:00
Scott Lahteine	9c62c47579	[2.0.x] Fix Dual X Carriage tool change crash (#11447 )	2018-08-03 20:47:29 -05:00
Scott Lahteine	9bae413901	Add Bigtreetech/BIQU KFB 2.0 board (#11446 )	2018-08-03 18:14:26 -05:00
Marcio Teixeira	f2224755ad	Fix jumping progress bar. (#11439 ) - When LCD_SET_PROGRESS_MANUALLY was disabled and an SD print was not active (i.e. the printer was idle), progress_bar_percent would read uninitialized memory from stack and cause progress bar to jump wildly. - Also updated conditions in `#ifdef` to match `ultralcd.cpp`	2018-08-03 17:17:02 -05:00
Scott Lahteine	aae02827c0	Cosmetic pins changes	2018-08-03 17:03:19 -05:00
Scott Lahteine	64c493ad82	MKS_12864_OLED code cleanup	2018-07-30 23:22:40 -05:00
Scott Lahteine	b826bf4194	Fix initial safe_speed in jerk code (#11417 )	2018-07-30 22:50:08 -05:00
forkoz	2cc950d67e	[2.0.x] MKS SBASE Trinamic examples/support (#11402 )	2018-07-30 22:48:58 -05:00
Roxy-3D	16432376ab	Revert "[2.0.x]Idex and bl touch fixes" (#11407 ) * Revert "[2.0.x] bltouch home refinements (#11397)" This reverts commit `74900f7a70`. * Revert "[2.0.x]Idex and bl touch fixes (#11395)" This reverts commit `6dafb90c01`.	2018-07-28 23:14:46 -05:00
Giuliano	74900f7a70	[2.0.x] bltouch home refinements (#11397 ) Just create a better functions call logic flow	2018-07-28 19:30:14 -05:00
silentninja1	6dafb90c01	[2.0.x]Idex and bl touch fixes (#11395 ) * Fix BLTouch homing Deploy at start, dont call generic stow function at finish or raise goes too high before setting 0 * Update tool_change.cpp * Update motion.cpp * Update motion.cpp * Update motion.cpp * Update motion.cpp * Change brackets to be more in align of Marlin coding standards	2018-07-28 10:33:31 -05:00
Giuliano	5ce5ff8e9b	[2.0.x] fix bltouch homing (#11379 ) Partially revert. Seems to solve the issue, but one report says G29 still fails.	2018-07-27 18:30:08 -05:00
Scott Lahteine	15d68cb496	Pre-override of ST7920 delays before HAL.h	2018-07-26 23:33:18 -05:00
Dave Johnson	8a24ff94d1	AT90USB1286 PIO cleanup and optimization (#11230 ) -normalize `env` and `board` to lowercase naming convention. -make board `name` follow descriptive convention. -implement `-fsingle-precision-constant` compile optimization per https://github.com/MarlinFirmware/Marlin/pull/11178#issuecomment-401673901 -fix typo in 5DPRINT entry.	2018-07-26 05:58:28 -05:00
Lee Olivares	094e6d81a5	Add Einstart-S support (#11219 ) Indeed the HAL does not need to be mucked around with to expose ATmega2560 pins not available as numbers on the MEGA board, I'll need to update the wiki with that tidbit and a reference to the pin-mapping comment in `fastio_1280.h`.	2018-07-26 05:52:22 -05:00
Scott Lahteine	244b9a8257	Better fastio 1280/2560 pin list Co-Authored-By: bleughb <36889022+bleughb@users.noreply.github.com>	2018-07-26 05:23:51 -05:00
Scott Lahteine	955a7f0ae9	Improve driver.h macros (#11371 )	2018-07-26 05:11:22 -05:00
MikeLud	aadcf08913	[2.0.x] add Calibrate Z (M915) to Prepare Menu (#11331 )	2018-07-26 05:09:49 -05:00
Giuliano	4237c3d9f8	[2.0.x] different bltouch init (#11135 )	2018-07-26 05:04:09 -05:00
Andy Shaw	624986d423	Ensure ADC conversion is complete before reading (#11336 ) The current Marlin implementation relies on a timer interrupt to start the ADC conversion and read it. However in some circumstances the interrupt can be delayed resulting in insufficient time being available for the ADC conversion. This results in a bad reading and false temperature fluctuations. These changes make sure that the conversion is complete (by checking the ADC hardware via the HAL) before reading a value. See: https://github.com/MarlinFirmware/Marlin/issues/11323	2018-07-26 03:59:19 -05:00
Scott Lahteine	e2aa635e70	Fix Anet A6 thermistors Co-Authored-By: vitekn <vitekn@users.noreply.github.com>	2018-07-26 02:02:27 -05:00
Bo Herrmannsen	67b205fd45	Add support for board RuRAMPS4D v1.3 (#11363 )	2018-07-25 19:32:27 -05:00
forkoz	d1c6687ecd	Update MKS sBase pins (#11357 )	2018-07-25 19:19:09 -05:00
Scott Lahteine	048dbf6eca	Merge pull request #11275 from thinkyhead/bf2_pwm_adjustments [2.0.x] Tweak some SoftPWM code	2018-07-25 19:02:28 -05:00
Scott Lahteine	e05e95cf97	Clean trailing whitespace	2018-07-25 18:49:47 -05:00
Scott Lahteine	22ebbc091f	Tweak some SoftPWM code	2018-07-25 18:09:31 -05:00
Scott Lahteine	32de09f5c5	Specify some extra CR-10S pins	2018-07-25 18:08:09 -05:00
J.C. Nelson	9c2bfa2ab3	Remove extra parameter to enqueue. (#11364 )	2018-07-25 18:02:02 -05:00
Giuliano	bd3ec66a78	[2.0.x] typo fix (#11365 ) Typo fix	2018-07-25 18:00:47 -05:00
teemuatlut	fbcdf5eaeb	Simplify stepper driver per-axis selection	2018-07-25 02:47:43 -05:00
Scott Lahteine	e5c0b490c8	Add *_DRIVER_TYPE to example configs Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>	2018-07-25 02:47:30 -05:00
Eyal	fbdbe53290	Fix get_period_inverse(0) so it doesn't crash (#11334 )	2018-07-25 01:58:40 -05:00
Scott Lahteine	14e2b11195	Fix spelling in configs	2018-07-24 21:03:38 -05:00
Scott Lahteine	4685c7d59f	Followup to M91x I patch	2018-07-24 18:30:28 -05:00
Roxy-3D	62fa028155	Handle dual gantry machines better	2018-07-24 15:34:53 -05:00
Roxy-3D	09485f63e9	add missing ')'	2018-07-22 10:50:41 -05:00
Roxy-3D	a35abce1ac	Fix missing ')'	2018-07-19 19:20:40 -05:00
Scott Lahteine	76d4cfb064	Tweak some Max7219 code	2018-07-19 18:49:39 -05:00
Scott Lahteine	4195757585	Merge pull request #11309 from thinkyhead/bf2_manual_probe_start_z [2.0.x] Manual Z Start Height	2018-07-19 18:26:26 -05:00
Roxy-3D	03b01e2500	Folger Tech i3-2020 now defaults to 2 Max7219 units	2018-07-19 17:02:46 -05:00
Roxy-3D	db85ca93c4	Change Max7219_idle_task() to use a column instead of row if Y-Axis as 16 LED's	2018-07-19 17:01:31 -05:00
Roxy-3D	9660996cc3	Add Multi Unit Support for Max7219 to bugfix_2.0.0 (#11285 ) * Add Multi Unit Support for Max7219 to bugfix_2.0.0 * Apply multi-MAX7219 to example configs * Tweak some spacing, macros	2018-07-19 13:56:47 -05:00
Scott Lahteine	39c8aed8ba	Add MANUAL_PROBE_START_Z to example configs	2018-07-18 21:49:20 -05:00
Scott Lahteine	2106fa26b1	Add MANUAL_PROBE_START_Z for manual probing	2018-07-18 21:49:20 -05:00
Scott Lahteine	17ed0f815c	Fix tool_change call in UBL G29 Fix #11279, #11252	2018-07-18 20:30:30 -05:00
Scott Lahteine	6d2aff03bd	Merge pull request #11306 from thinkyhead/bf2_power_loss_pin [2.0.x] Add support for power loss detect pin	2018-07-18 20:13:20 -05:00
Scott Lahteine	63a146d424	planner.synchronize at start of tool_change See https://github.com/MarlinFirmware/Marlin/issues/10949#issuecomment-398540498	2018-07-18 20:10:55 -05:00
Scott Lahteine	665ac1e4d0	Add POWER_LOSS_PIN support	2018-07-18 19:55:10 -05:00
Scott Lahteine	2243f72523	Add POWER_LOSS_PIN to example configs	2018-07-18 19:55:10 -05:00
Chris Pepper	47d5fcbbcc	[2.0.x] Change MKS SBASE default serial port to avoid confusion (#11301 )	2018-07-18 18:43:20 -05:00
Scott Lahteine	c83109c0ae	Merge pull request #11238 from xC0000005/MalyanLCDUpdate [2.0.x] Malyan LCD Feedrate + Better Temp Handling	2018-07-17 21:06:52 -05:00
Scott Lahteine	64f007580b	Fix some header comments	2018-07-17 19:50:24 -05:00
Giuliano	aed1d17a2d	Initialize default units (#11295 ) When `INCH_MODE_SUPPORT` is enabled no default unit is set. This fixes it.	2018-07-17 19:37:30 -05:00
Scott Lahteine	8c40f0c6c7	Reduce TQ message code size	2018-07-17 18:18:52 -05:00
xC0000005	b04e0c0cbb	Malyan LCD feedrate, better temp handling.	2018-07-17 18:18:52 -05:00
Scott Lahteine	065e9c3d66	Add card.longest_filename method	2018-07-17 18:18:52 -05:00
Roxy-3D	71df1f7f57	Don't display M421 information for UBL at startup It takes too long to display the mesh data for large mesh's at startup. We should consider ways to speed this up. Perhaps it makes sense to display an entire row of the mesh instead of just one mesh point?	2018-07-17 17:19:52 -05:00
Scott Lahteine	be7d1dfb3c	Merge pull request #11267 from teemuatlut/bf2_lpc_spi [2.0.x] LPC1768: Expand hardware SPI class	2018-07-16 21:52:18 -05:00
Giuliano	8f686aa449	[2.0.x] Fix change filament crash (#11269 ) Prevent crash, on filament change, when printer is not homed	2018-07-16 21:49:29 -05:00
teemuatlut	f38c81cdde	LPC176x: Expand HW SPI class	2018-07-14 19:06:27 +03:00
teemuatlut	3b5dec4b13	Add new LPC include folder	2018-07-14 18:58:56 +03:00
Scott Lahteine	e486326910	Vellemann K8400 Y bed size is 180 Co-Authored-By: kaimimue <kaimimue@users.noreply.github.com>	2018-07-13 23:19:46 -05:00
Giuliano	e5ea9d200f	[2.0.x] fix kill printer (#11260 ) This will fix kill message on dual printer with 0 alignment offset	2018-07-13 23:12:43 -05:00
Jamie Bainbridge	8c57cadbe7	Include stdlib in fontutils (#11251 ) When `REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER` is defined and Re-ARM build is attempted, `u8g_fontutf8.cpp` includes `fontutils.h` which uses `abs()`. However, `abs()` is defined in `stdlib.h` which is not included in `fontutils.h`, so compile fails with an error. Include `stdlib.h` in `fontutils.h` so that `abs()` is defined before `u8g_fontutf8.cpp` needs to use it, resolving the compile error. Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>	2018-07-13 00:02:38 -05:00
Scott Lahteine	bf7d0ba859	Assert that XY probe offsets are integers	2018-07-12 22:48:07 -05:00
Scott Lahteine	12854f1909	Add Z_CLEARANCE_MULTI_PROBE to example configs Co-Authored-By: nightgryphon <ngryph@gmail.com>	2018-07-12 22:46:34 -05:00
Scott Lahteine	25e2ca8896	Add Z_CLEARANCE_MULTI_PROBE Co-Authored-By: nightgryphon <ngryph@gmail.com>	2018-07-12 22:46:34 -05:00
Scott Lahteine	fd8a76493b	Unify M91x parameter I meaning, simplify reports (#11249 )	2018-07-12 22:31:51 -05:00
Scott Lahteine	566d05006d	report_state > event_handler Make the endstop report method track endstop changes on its own.	2018-07-11 21:08:07 -05:00
Scott Lahteine	6b521b6df2	Loosen thermistor table size limit Co-Authored-By: Aaron Griffith <aargri@gmail.com>	2018-07-11 21:08:07 -05:00
Scott Lahteine	20761b88e0	Merge pull request #11212 from AlexanderAmelkin/2.0-HD44780-remove-unused-include [2.0.x][HD44780] Remove unused include	2018-07-08 17:19:59 -05:00
Roxy-3D	603e136e87	Resolve issue where user can't edit UBL's mesh	2018-07-08 14:41:38 -05:00
Alexander Amelkin	ed720194d2	[2.0.x][HD44780] Remove unused include The <binary.h> header is not available in STM32 toolchain and is not used anywhere in ultralcd_common_HD44780.h. If it is used anywhere in HD44780 support for other platforms, it must be included in the corresponding .cpp file directly and put under appropriate conditional compilation directives for the platform requiring it. As I was unable to find such code, I consider the file unused and hence remove the inclusion.	2018-07-06 23:45:47 -05:00
Scott Lahteine	d05e832f29	Add STM32F1 support for SD-based EEPROM	2018-07-06 23:45:47 -05:00
Scott Lahteine	63f4c9bdb9	Followup to float maths patch	2018-07-06 21:34:09 -05:00
Scott Lahteine	2992112da0	Optimize delta kinematics Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-07-04 22:28:56 -05:00
etagle	1367df2875	Replace double with float, optimize calculation	2018-07-04 22:28:56 -05:00
Scott Lahteine	d960d448fa	Optimize calculations with LROUND	2018-07-04 22:22:28 -05:00
Scott Lahteine	68e6650df7	Remove Quake Fast Inverse SQRT (it isn't faster)	2018-07-04 22:22:10 -05:00
etagle	e7e896e7d7	More tweaks to fastio_Due.h	2018-07-04 17:57:47 -05:00
Chris Pepper	55f4744e54	[LPC176x] Endstop Interrupts Feature (#11202 ) Enable the endstop interrupts feature for LPC176x boards. Although Smoothieboard chose to use non-interrupt capable pins for their endstops, and this has been copied by clones, so they can't use it.	2018-07-04 17:51:45 -05:00
Chris Pepper	5abf5bc8a7	[LPC176x] Fix Interrupt forward declarations (#11200 )	2018-07-04 17:43:14 -05:00
Chris Pepper	cbea385ed7	[2.0.x] Fix LCD_LANGUAGE options list formatting in config (#11198 ) * Fix LCD_LANGUAGE options list formatting in config * Remove 'cn' language option from list	2018-07-04 17:42:14 -05:00
Scott Lahteine	6837252fba	Merge pull request #11196 from thinkyhead/bf2_fix_m914_sgt [2.0.x] No M914 or SGT with non-sensorless axes	2018-07-04 02:34:48 -05:00
Scott Lahteine	5379c115c8	Fix Trigorilla include typo	2018-07-03 20:23:26 -05:00
Scott Lahteine	9c058091e9	No M914 or SGT set for non-sensorless axes	2018-07-03 20:09:13 -05:00
Scott Lahteine	c7ec6c68e7	Patch SCARA config to match 1.1.x	2018-07-03 20:09:13 -05:00
Scott Lahteine	480a3d3d0c	Apply sensorless homing requirements only for specified axes	2018-07-03 19:16:09 -05:00
Scott Lahteine	47ee149dfd	Merge pull request #11195 from thinkyhead/bf2_tronxy_x3a [2.0.x] Tronxy X3A configurations and thermistor	2018-07-03 19:06:01 -05:00
Scott Lahteine	8c0ec81a19	Followup to #11187	2018-07-03 18:19:26 -05:00
Scott Lahteine	48c1f32b3e	Add configurations for Tronxy X3A	2018-07-03 17:56:48 -05:00
Scott Lahteine	568cfe7caa	Add thermistor 501 (100K Zonestar)	2018-07-03 17:52:06 -05:00
Scott Lahteine	1a0f4dedad	Fix and improve POWER_LOSS_RECOVERY (#11187 )	2018-07-02 23:21:28 -05:00
Scott Lahteine	e0ab8acf19	Add "Marlin Dev Mode" option	2018-07-02 22:55:21 -05:00
Scott Lahteine	4b2af6ab48	Minor patches to POWER_LOSS_RECOVERY	2018-07-02 17:26:53 -05:00
Scott Lahteine	1ea222e6fc	Turn off DISABLE_INACTIVE_EXTRUDER with SWITCHING_NOZZLE Fix #11183	2018-07-02 17:26:53 -05:00
Roman Moravčík	8299ac121d	[2.0.x] Slovak translation update (#11175 )	2018-07-01 23:15:51 -05:00
teemuatlut	3de0c85d41	Fix RRW graphical LCD constructor macro (#11171 )	2018-07-01 23:14:23 -05:00
TheLongAndOnly	cedc158106	[2.0.x] Board specific init macro (#11170 )	2018-07-01 23:11:42 -05:00
Chris Pepper	5616581eb1	[LPC176x] Update fastio _GET_INPUT, _GET_OUTPUT macros (#11168 )	2018-07-01 23:02:38 -05:00
Scott Lahteine	8a8eae8d97	Implement more fastio_Due macros (#11165 )	2018-07-01 01:24:06 -05:00
Scott Lahteine	c51e27d11d	Do a hard kill for failed homing moves (#11161 )	2018-06-30 21:54:07 -05:00
Scott Lahteine	90ba77ea0f	Lose the old HOMEAXIS macro	2018-06-30 18:13:13 -05:00
Scott Lahteine	2421f3a47d	Detect endstop hits in any direction	2018-06-30 17:27:37 -05:00
Scott Lahteine	f9a090b2cf	Fix Trigorilla 1.4 pins See #11097	2018-06-30 13:45:55 -05:00
Scott Lahteine	8eaac0dab3	Add delta feedrate scaling (#11153 )	2018-06-30 13:44:27 -05:00
Scott Lahteine	444725ae9a	Non-conflicting CS pins for MKS Gen L	2018-06-30 02:36:01 -05:00
J.C. Nelson	8c9f90153e	Enable Malyan LCD Support for M200 printers. (#11051 )	2018-06-30 00:35:54 -05:00
Scott Lahteine	fc10101b06	Tweaks to fastio_Due.h	2018-06-30 00:15:50 -05:00
Scott Lahteine	05518d6add	Add newline to end of file	2018-06-29 23:54:16 -05:00
Scott Lahteine	d4fde91222	Fix serial.h including itself	2018-06-29 23:53:25 -05:00
Scott Lahteine	a431013eb7	Fix G33 compile warning	2018-06-29 23:17:51 -05:00
Scott Lahteine	bd7f5848f1	Remove JUNCTION_DEVIATION_INCLUDE_E option (#11147 )	2018-06-29 22:42:05 -05:00
Scott Lahteine	fbf1c9b496	Fix and tweak POWER_LOSS_RECOVERY (#11151 )	2018-06-29 22:41:02 -05:00
Colin Gilgenbach	0fff79c24b	Fixes G29_with_retry behavior (#11045 ) * Fix G29 (ABL) retry behavior	2018-06-29 20:48:11 -05:00
Scott Lahteine	3349eb0020	Fix SKEW_CORRECTION compile error	2018-06-29 19:38:18 -05:00
Scott Lahteine	a264030526	Fix "G29" G29_MAX_RETRIES handling	2018-06-29 18:46:31 -05:00
Scott Lahteine	42f9921482	Ignore Z min endstop with separate Z-probe To allow for the case where a Z endstop (e.g., hall effect) is higher than the probe trigger point, don't check the Z min endstop during probe moves. See #11134	2018-06-28 05:06:11 -05:00
Scott Lahteine	1b8973eb1c	Fix up microsteps conditionals	2018-06-27 23:41:32 -05:00
Scott Lahteine	aa4cd2e861	Eliminate stepper.* signed/unsigned warnings	2018-06-27 23:10:51 -05:00
Eduardo José Tagle	edb21f349a	Fix stepper/planner block handling, race conditions (#11098 ) - Allow planner to alter the deceleration phase of the currently executing block. - Remove BUSY flag, as it is NON ATOMIC to set bits in the Stepper ISR and Planner at the same time.	2018-06-27 18:11:16 -05:00
Scott Lahteine	4d3a9930c5	Match ASM comment spacing to 1.1.x	2018-06-27 17:26:48 -05:00
Scott Lahteine	053438a3aa	Poll all endstops, even when stationary (#11123 )	2018-06-27 04:18:57 -04:00
Andy Shaw	3b3029c4bf	Make max_e_jerk an array to reduce CPU usage (#11118 )	2018-06-26 22:38:31 -04:00
Scott Lahteine	d13f76b7da	Patch some loop macros	2018-06-26 20:30:52 -05:00
Scott Lahteine	229b26b02c	Clear LED matrix without startup test	2018-06-26 18:54:01 -05:00
Alexander Amelkin	ffdbc1f42c	STM32F1: Fix SD card persistent store API (#11090 )	2018-06-26 14:41:23 -04:00
Giuliano	8d8f257384	[2.0.x] Fix advanced pause init values (#11095 ) Fixed for cycle used to initialize default values	2018-06-26 14:37:52 -04:00
etagle	5b49fccf80	Add stepper driver DIR delay configuration option ...and recommended pulse width configuration for A4988	2018-06-26 13:28:04 -05:00
Scott Lahteine	d86f25ab63	Fix Serial ISR priority for LPC1768 Co-Authored-By: p3p <p3p@p3psoft.co.uk>	2018-06-25 12:15:41 -04:00
etagle	fb4e0b105b	Fix endstops compilation error	2018-06-25 12:10:17 -04:00
Eduardo José Tagle	48a15d1c7e	[2.0.x] Fix stepper/planner race condition and Stepper pulse timer (#11081 ) * Planner: Removal of some race conditions between Stepper ISR and Planner, some of them pointed out by @AnHardt, some of my own findings * Fixing timing on stepper pulses adding a compensation for the non-null time required to set ports.	2018-06-22 09:15:37 -05:00
Michael Triffon	7e802145cc	[2.0.x] Add CR-10 stock display support for Re-Arm (EXP3) (#11068 )	2018-06-21 23:08:17 -05:00
Scott Lahteine	50b6204079	Fix LIN_ADVANCE max_e_jerk_factor According to https://github.com/MarlinFirmware/Marlin/issues/9917#issuecomment-399204568	2018-06-21 22:02:34 -04:00
Scott Lahteine	99591dc20c	Filter endstops state at all times (#11066 )	2018-06-21 20:14:16 -05:00
Scott Lahteine	a5c11bf578	Merge pull request #11075 from thinkyhead/bf2_value_editing [2.0.x] Fix value editing (with callback)	2018-06-21 20:13:58 -05:00
Roxy-3D	1d7dd0edfd	Add the move_z_after_probing() functionality to UBL's G29 J	2018-06-21 13:26:20 -05:00
Scott Lahteine	383129728a	Edit Z fade as whole numbers	2018-06-21 11:52:29 -04:00
Scott Lahteine	1239e8eda2	Fix value editing with callback	2018-06-21 11:52:03 -04:00
Scott Lahteine	7a84b03796	Use MIN/MAX in post-conditionals	2018-06-20 03:15:19 -05:00
Scott Lahteine	a2a30ff0ac	Use Tool 0 for Dual X Axis G29 See https://github.com/MarlinFirmware/Marlin/issues/5597#issuecomment-397683325	2018-06-20 01:32:23 -05:00
Scott Lahteine	e366d55bc2	Don't reset stepper timeout for all g-codes	2018-06-19 21:48:28 -05:00
Scott Lahteine	7406f04029	Use MAX (not max) in stepper.h	2018-06-19 20:51:07 -05:00
Roxy-3D	7c54c4ed27	Tiny improvement to M7219 The registers within the Max7219 can get corrupted a number of ways. This allows the Max7219 to be reset and fully initialized. And... it also allows the user to see the initialization pattern.	2018-06-19 14:46:30 -05:00
Giuliano	a65d15c905	[2.0.x] Fix Italian msg len (#11058 ) Fix message to long for 12864 display	2018-06-18 22:04:55 -05:00
Scott Lahteine	d4795e5b8e	[2.0.x] Tweaks and additions for MAX7219 (#11034 )	2018-06-18 22:04:03 -05:00
Scott Lahteine	e23677a7b2	Update some G-code comments	2018-06-18 16:13:01 -05:00
Chris Pepper	0312c42f9d	[2.0.x] LPC176x Serial cleanup (#11032 )	2018-06-16 20:59:22 -05:00
Scott Lahteine	c1269c2ec1	Tweak AVR critical section defines	2018-06-16 17:42:32 -05:00
Scott Lahteine	da94e0bd27	Unsigned eeprom mesh addresses	2018-06-15 15:51:57 -05:00
Chris Pepper	f88adcbfd5	[2.0.x][LPC176x] Fix binary linking broken by pio update (#11026 )	2018-06-15 15:32:51 -05:00
Simon Jouet	e2aeda61ed	HAL for Espressif ESP32 Wifi	2018-06-13 19:33:35 -05:00
Scott Lahteine	091f742432	Add WIFISUPPORT to example configs	2018-06-13 19:27:33 -05:00
Scott Lahteine	19d4c7c1cd	Tweak HAL header comments	2018-06-13 19:08:42 -05:00
Giuliano	cce0523a95	[2.0.x] reset bltouch on home (#11018 ) Added reset bltouch instead. This ensure properly stow even when in error.	2018-06-13 14:09:13 -05:00
Scott Lahteine	4c8d6df13c	Extra insurance against endstop false positives (#11013 )	2018-06-13 01:22:02 -05:00
Scott Lahteine	81edbfa665	Merge pull request #11004 from ejtagle/always_honor_maximum_step_rate [2.0.x] Fix stepper pulse minimum period and timing calculations	2018-06-12 22:17:22 -05:00
Scott Lahteine	f3fed52348	Fix coolstep_min_speed / sensorless homing Fix #8890	2018-06-12 22:12:46 -05:00
etagle	a215725df6	Fix stepper pulse timing Always honor minimum period on stepper pulse generation, and fix timing calculations Signed-off-by: etagle <ejtagle@hotmail.com>	2018-06-12 21:34:24 -05:00
Scott Lahteine	0d79128c8d	Localize stepper-specific defines	2018-06-12 21:16:54 -05:00
Scott Lahteine	a9861a780e	Tweak HAL heading	2018-06-12 19:40:17 -05:00
Scott Lahteine	cf53e502a2	No need to set input after attachInterrupt	2018-06-12 18:43:11 -05:00
Karl Andersson	e0276d2f32	Official STMicroelectronics Arduino Core STM32F4 HAL compatibility (#11006 )	2018-06-12 18:38:00 -05:00
Scott Lahteine	4dbec774b5	HAL__TIMER_RATE => _TIMER_RATE	2018-06-12 16:39:12 -05:00
Scott Lahteine	12689f2470	Merge pull request #11001 from thinkyhead/bf2_junction_deviation_fix [2.0.x] Updates for junction_deviation_mm	2018-06-11 22:31:17 -05:00
Scott Lahteine	9b945c13a1	Fix STM32F1 ISR_ENABLED	2018-06-11 22:09:45 -05:00
Scott Lahteine	9d04f47d98	Improvements for junction_deviation_mm - Drop `max_jerk` with `JUNCTION_DEVIATION` - Add `max_e_jerk_factor` for use by `LIN_ADVANCE` - Recalculate `max_e_jerk_factor` when `junction_deviation_mm` changes - Fix LCD editing of `junction_deviation_mm`	2018-06-11 22:05:16 -05:00
Scott Lahteine	f2c3b0d476	Use bit flags for homed/known	2018-06-11 22:05:16 -05:00
Scott Lahteine	4832be52d7	Followup to G29 O	2018-06-11 21:57:26 -05:00
Robert Mendon	86170e6a66	[2.0.x] Add O (optional) flag to G28/G29 (#10913 )	2018-06-11 21:51:48 -05:00
Alexey Shvetsov	2ddba201c0	STM32F1 HAL Fixes (#10999 ) - Enable / disable interrupts with `__iSeiRetVal` / `__iCliRetVal` - Add STM32F1 to Travis CI tests	2018-06-11 20:00:56 -05:00
Scott Lahteine	43bdd0bfe4	Fix indent in stepper.h	2018-06-11 19:17:46 -05:00
Scott Lahteine	2ba198a624	Tweak M122 report spacing	2018-06-10 20:33:18 -05:00
Eduardo José Tagle	5590c8ffd0	Fix MarlinSerial (AVR) (#10991 ) An undocumented hw bug makes the UART lose chars when RX ISR is disabled, even for a very small amount of time. This happens when RX_BUFFER > 256, and the result is corrupted received commands. Solved by implementing pseudo-atomic operations on 16bit indices.	2018-06-10 20:32:20 -05:00
Scott Lahteine	3fd1f32b73	Fix ADC key and chamber temp	2018-06-10 20:11:40 -05:00
Scott Lahteine	117fd007a9	Followup to pin error change	2018-06-10 19:28:45 -05:00
Scott Lahteine	ae07a3e4aa	Multiplier edit large ranges	2018-06-10 18:22:12 -05:00
Scott Lahteine	20a5db03bb	Junction Deviation limit (0.01 to 0.3)	2018-06-10 18:22:08 -05:00
Scott Lahteine	a2f521d34b	Add Junction Deviation mm runtime setting (#10990 )	2018-06-10 18:02:54 -05:00
Scott Lahteine	590ce1c33e	Fix serial debug ouput	2018-06-10 17:54:22 -05:00
Scott Lahteine	968a5d2e63	Protected pin err for M226	2018-06-10 17:45:47 -05:00
Scott Lahteine	4b90cd8ead	Merge pull request #10922 from ejtagle/bugfix-2.0.x [2.0.x] Adaptive multiaxis step smoothing, and tons of fixes	2018-06-10 16:28:52 -05:00
Giuliano	f1cdfe3dfd	[2.0.x] stow bltouch before start homing (#10987 )	2018-06-10 16:27:14 -05:00
etagle	6f14bcaa3e	Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping The timing value should be properly set for ALL boards. The compiler will check and set maximum step rate calculations based on those values.	2018-06-10 16:02:47 -05:00
etagle	39a7e7720d	Adaptive multiaxis step smoothing - Stepper bugs fixed - Support MIXING_EXTRUDER with Linear Advance - Miscellaneous cleanup	2018-06-10 16:02:47 -05:00
etagle	99af086cea	Add hidden Serial overflow debug options	2018-06-10 04:25:42 -05:00
etagle	d90e8fcad9	Fix XON/XOFF implementation Pointed out by @GMagician	2018-06-10 04:25:42 -05:00
Scott Lahteine	bbf80440bf	Add sanity-check for MOTHERBOARD	2018-06-10 04:03:33 -05:00
Giuliano	b64cc9329e	[2.0.x] Fix dual enstop home (#10980 )	2018-06-10 02:08:47 -05:00
Scott Lahteine	8a376e6beb	Update MINIMUM_STEPPER_PULSE description	2018-06-10 00:13:03 -05:00
Scott Lahteine	3701869e6c	Add HAL_timer_start for AVR, use stepper timer to time pulses	2018-06-09 22:30:13 -05:00
Giuliano	e970e429b6	[2.0.x] Fix null check in lsDive (#10978 )	2018-06-09 22:03:49 -05:00
etagle	d82704354f	Increase the planner first block HOLD delay to 100mS	2018-06-09 21:12:37 -05:00
Scott Lahteine	779d4a17a0	Highlight 64128N and common ST7565 difference Followup to #10920, addressing #10962	2018-06-09 19:18:41 -05:00
Scott Lahteine	b9418439b9	Prevent MB false-positive on bad board name	2018-06-08 19:58:43 -05:00
Scott Lahteine	88314b8910	CREALITY_ENDER is long gone As noted in #10965	2018-06-08 19:53:21 -05:00
Scott Lahteine	334341c632	Hephestos config updates (#10960 )	2018-06-07 21:23:55 -05:00
Scott Lahteine	f74278b8b1	Add -4 thermocouple to list in configs	2018-06-07 21:04:06 -05:00
Scott Lahteine	7ba5afff01	Allow FAN_PIN override, pins cleanup (#10956 )	2018-06-07 16:46:13 -05:00
Scott Lahteine	55aedf036b	Fix M503 ABL mesh report. (Zero-based IJ indices)	2018-06-07 16:36:50 -05:00
Scott Lahteine	e7623b5788	Restore Z_PROBE_PIN to pinsDebug_list.h	2018-06-07 15:39:24 -05:00
Scott Lahteine	a426986df8	Ensure pins set to INPUT after attachInterrupt (#10928 )	2018-06-06 20:59:08 -05:00
Scott Lahteine	d8b983f624	More concise M503 output for M906, M913, M914 (#10947 )	2018-06-06 20:58:28 -05:00
Giuliano	eb1026d438	[2.0.x] Fix compile warning (#10931 )	2018-06-05 22:44:34 -05:00
Scott Lahteine	c2bdbdffaa	Prevent a buffer overflow in diveToFile Co-Authored-By: akunt	2018-06-05 22:13:17 -05:00
Giuliano	c9d1a620d4	[2.0.x] fix indentations (#10934 )	2018-06-05 02:03:26 -05:00
Roxy-3D	d550da084f	Fix Max7219 control pins for use with 32-bit platforms	2018-06-04 13:37:23 -05:00
Scott Lahteine	c16e41e9e6	STM32F4 pins cleanup	2018-06-03 19:08:04 -05:00
Scott Lahteine	c685c7b7dd	STM32F4: All pins can do PWM	2018-06-03 04:30:15 -05:00
Scott Lahteine	2fd9ba56da	LED menu item bool (like Case Lights)	2018-06-03 00:34:29 -05:00
Scott Lahteine	ad8d3150aa	Cleanup for dual endstops homing	2018-06-03 00:34:29 -05:00
Scott Lahteine	61181b7f24	Add macros for ST7565 commands	2018-06-02 20:48:44 -05:00
Eduardo José Tagle	d3c02410a8	[2.0.x] Small assorted collection of fixes and improvements (#10911 ) * Misc fixes and improvements - Get rid of most critical sections on the Serial port drivers for AVR and DUE. Proper usage of FIFOs should allow interrupts to stay enabled without harm to queuing and dequeuing. Also, with 8-bit indices (for AVR) and up to 32-bit indices (for ARM), there is no need to protect reads and writes to those indices. - Simplify the XON/XOFF logic quite a bit. Much cleaner now (both for AVR and ARM) - Prevent a race condition (edge case) that could happen when estimating the proper value for the stepper timer (by reading it) and writing the calculated value for the time to the next ISR by disabling interrupts in those critical and small sections of the code - The problem could lead to lost steps. - Fix dual endstops not properly homing bug (maybe). * Set position immediately when possible	2018-06-01 19:02:22 -05:00
Scott Lahteine	2deff0d9b9	Fix/Improve junction deviation - Respect axis max acceleration limits instead of forcing a fixed acceleration value. - The `junction_unit_vec` ensures proper handling of entry and exit speeds even when the axes involved have different limits.	2018-05-31 20:09:53 -05:00
Scott Lahteine	6885ca606c	Drop JUNCTION_ACCELERATION from example configs	2018-05-31 20:07:28 -05:00
Chris Pepper	d87257f63c	[2.0.x][LPC176x] Fix PIO build flags (#10909 ) Don't build and link with different flags, the binary may not work.	2018-05-31 19:08:31 -05:00
Axel	ae322e0c54	[2.0.x] Add GTM32 Pro VB support (#10898 )	2018-05-31 00:11:38 -05:00
Scott Lahteine	d259070980	Clean up trailing spaces from vim, etc.	2018-05-31 00:09:41 -05:00
Scott Lahteine	21d812d502	Fix the Z un-hop on G11 Co-Authored-By: zarthcode <anthony.clay@zarthcode.com>	2018-05-29 23:41:36 -05:00
Scott Lahteine	d3c473002a	For SCARA probe Y offset is proximal/distal	2018-05-29 21:55:53 -05:00
Scott Lahteine	b90f54b0fc	Improve probe logging	2018-05-29 21:54:13 -05:00
Scott Lahteine	3f2a062a57	Fix M914 value range (-64...+63) Fix #10896	2018-05-29 12:02:15 -05:00
Scott Lahteine	b6cd8d9cc6	Set deltas to park on the left	2018-05-29 11:44:31 -05:00
Scott Lahteine	9713538427	HOTENDS for Switching Nozzle with Switching Extruder	2018-05-29 11:05:52 -05:00
Scott Lahteine	c68b7b3913	Update Fan 2 and E0 Auto Fan pins for Trigorilla	2018-05-28 21:11:12 -05:00
Scott Lahteine	cbcb284f4a	Allow libServo::attach to work on Teensy 3.5/3.6	2018-05-28 20:56:24 -05:00
Chris Pepper	f89f7c4a82	[2.0.x][LPC176x][Build] Force single precision constants, disable freestanding (#10892 )	2018-05-28 19:38:22 -05:00
Scott Lahteine	4299e5dc8b	Modify E-stepping macros for use in LINEAR_ADVANCE (#10885 )	2018-05-28 19:34:08 -05:00
Scott Lahteine	8f14ef855d	More concise commentary in planner.cpp	2018-05-28 19:25:18 -05:00
Scott Lahteine	6919e87656	Minor cleanup of multi-stepping logic	2018-05-28 17:44:33 -05:00
android444	16da5c62d0	Teensy 3.x fastio pullup (#10890 )	2018-05-28 16:25:12 -05:00
Scott Lahteine	853a9056ac	Long thermistor tables need special consideration	2018-05-28 06:28:34 -05:00
Scott Lahteine	a4f9c3373f	Tweak thermistor spacing	2018-05-28 03:44:32 -05:00
Scott Lahteine	9b9b62b218	delay(SERVO_DELAY) => safe_delay(servo_delay[servo_index])	2018-05-28 03:44:32 -05:00
Scott Lahteine	1ce97f1f6d	Faster (bisect) search in thermistor tables (#10883 )	2018-05-27 23:27:51 -05:00
Scott Lahteine	0ca9db7051	Correct HOTENDS for SWITCHING_EXTRUDER	2018-05-27 23:22:48 -05:00
Scott Lahteine	945139e328	Clean up some formatting	2018-05-27 17:58:40 -05:00
android444	9c235ef821	[HAL]Add support for ST7920 - Teensy 3.x (#10872 )	2018-05-27 03:36:57 -05:00
Eduardo José Tagle	7b9f0302d4	Fix Bresenham rounding errors, add link to article (#10871 )	2018-05-27 01:49:59 -05:00
Scott Lahteine	2566342979	Adjust some commentary	2018-05-27 00:10:25 -05:00
Scott Lahteine	1b200f3312	Sanity check SWITCHING_EXTRUDER with SINGLENOZZLE	2018-05-26 23:26:23 -05:00
Scott Lahteine	6775a16c97	Fix switching extruder stepping with LA	2018-05-26 19:07:01 -05:00
Scott Lahteine	2e139fe50f	Tweak configuration spacing	2018-05-26 18:33:51 -05:00
Scott Lahteine	931ab4ec40	Rename Junction Deviation options	2018-05-26 18:33:51 -05:00
Scott Lahteine	aaaf09bda2	BEZIER_JERK_CONTROL => S_CURVE_ACCELERATION	2018-05-26 18:33:51 -05:00
Scott Lahteine	cf7d5a642a	Fix manual moves for switching tools (#10868 )	2018-05-26 18:30:53 -05:00
Eduardo José Tagle	1da2c4f1c1	Text LCD display routine fix. Coauthored with @MagoKimbra (#10864 )	2018-05-26 18:13:33 -05:00
Bob-the-Kuhn	1c0ad8bbae	wrong type of exit method	2018-05-26 08:17:03 -05:00
Scott Lahteine	01d37e00af	Fix up stepper ISR with linear advance timing (#10853 ) Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-26 01:00:13 -05:00
Eduardo José Tagle	6f330f397e	[2.0.x] Buffer overflow and scroll fix, UTF8 cleanup (#10844 )	2018-05-25 23:32:37 -05:00
Bob Kuhn	235facd545	install AVRDUDE 5.10, faster disk find for LPC1768 (#10849 )	2018-05-25 20:26:48 -05:00
Scott Lahteine	645df23eb0	Fix warning with FASTER_GCODE_PARSER disabled	2018-05-25 06:45:42 -05:00
Scott Lahteine	d74e333c0f	Make sure FAN_ANIM_FRAMES is defined	2018-05-25 05:28:50 -05:00
Bob Kuhn	e2db509d58	[2.0.x] Update/Fix LPC1768 extra script upload_extra_script.py (#10843 ) * Use a different method to find the volume info in Windows	2018-05-25 04:31:18 -05:00
Scott Lahteine	7261f48872	Fix reset of endstops and move state	2018-05-24 19:33:36 -05:00
Scott Lahteine	50fa8e01c1	Minor optimization of axis_did_move bits	2018-05-24 19:08:07 -05:00
Scott Lahteine	a94506ada0	Fix K8400 Y min pos, M118 comment	2018-05-24 08:21:16 -05:00
Scott Lahteine	336a022529	Support Malyan LCD without SD	2018-05-24 05:01:18 -05:00
Scott Lahteine	f28e366b77	Followup for core endstops	2018-05-24 03:02:57 -05:00
Scott Lahteine	8b44745bc7	Clean up and consolidate SD-related code (#10831 )	2018-05-24 01:18:56 -05:00
Scott Lahteine	9644d56b42	Patches for core motion tests	2018-05-24 00:49:01 -05:00
Scott Lahteine	5f8591528e	Remove #pragmas that don't help c files	2018-05-23 23:47:16 -05:00
Scott Lahteine	230ae6a143	Default G30 to engage / disengage	2018-05-23 16:57:23 -05:00
Scott Lahteine	3e3789da85	Regression: Endstops Core compatibility (#10823 ) Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-23 03:45:25 -05:00
Scott Lahteine	c89649b46e	Suppress U8glib build warnings	2018-05-23 02:47:36 -05:00
Axel	bbd09a99f1	32 bit boards classification cleanup (#10818 ) - Ordering and match classification between `boards.h` and `pins.h` - Check `pins.h` environments	2018-05-22 21:20:24 -05:00
Scott Lahteine	ee333f6be2	Followup to endstops tweaks	2018-05-22 20:41:03 -05:00
Axel	d98bc71af7	Boards classification arrangement (#10814 ) STM32 ARM Cortex-M3 boards were listed as M4	2018-05-22 02:56:51 -05:00
Scott Lahteine	4b610b333e	Tweak G38 formatting	2018-05-22 01:56:03 -05:00
Scott Lahteine	d2647c1f19	Fix G1 behaviour after tool unpark Fix #10777 for 2.0.x Co-Authored-By: Ante Vukorepa <o.orcinus@gmail.com>	2018-05-22 00:53:00 -05:00
Scott Lahteine	3bb950c69a	Fix DEBUG_LEVELING_FEATURE for MBL As noted in #10777	2018-05-22 00:49:15 -05:00
Scott Lahteine	1af98519cd	Group and adjust LCD buttons code	2018-05-22 00:37:45 -05:00
Scott Lahteine	0c3773d724	Cleanup in stepper_indirection.h	2018-05-22 00:36:03 -05:00
Scott Lahteine	4118199ddd	Tweaks to core headers	2018-05-21 20:32:18 -05:00
Scott Lahteine	4b2f6e3b2b	[2.0.x] Add endstop noise filter (#10796 )	2018-05-21 15:51:38 -05:00
Scott Lahteine	65a004564c	Stepper::set_position needed for some applications	2018-05-21 15:21:33 -05:00
Scott Lahteine	435ecb6b67	Followup to stepper/planner refactor	2018-05-20 23:13:38 -05:00
Bob Kuhn	6dfbb39f83	[LPC1768] Add error-handling to upload script, update autobuild.py (#10802 )	2018-05-20 21:22:04 -05:00
Scott Lahteine	68d7fcec83	Simplify and fix Z fade height edit Fix #10761	2018-05-20 12:29:23 -05:00
Bob Kuhn	d557c84a71	[2.0.x] Error for FAST_PWM_FAN with 32 bit CPU (#10798 )	2018-05-20 11:37:55 -05:00
etagle	569df3fc0c	Fix interrupt-based endstop detection - Also implemented real endstop reading on interrupt.	2018-05-20 07:10:24 -05:00
etagle	a4af975873	Fix planner block optimization - Fixed the planner incorrectly avoiding optimization of the block following the active one. - Added extra conditions to terminate planner early and avoid redundant computations.	2018-05-20 07:10:24 -05:00
etagle	e0ca627033	Planner block HOLD flag Allows the Stepper ISR to wait until a given block is free for use. Allows Planner to plan the first move, which is split into two.	2018-05-20 06:23:58 -05:00
etagle	a11eb50a3e	Refactor and optimize Stepper/Planner Better encapsulation and considerably reduce stepper jitter	2018-05-20 06:23:58 -05:00
etagle	0566badcef	Add memory barrier, optimal interrupt on-off Disabling an ISR on ARM has 3 instructions of latency. A Memory barrier is REQUIRED to ensure proper and predictable disabling. Memory barriers are expensive, so avoid disabling if already disabled (See https://mcuoneclipse.com/2015/10/16/nvic-disabling-interrupts-on-arm-cortex-m-and-the-need-for-a-memory-barrier-instruction/)	2018-05-20 02:39:34 -05:00
Scott Lahteine	c2fb2f54a1	Use assembly for AVR ISR vectors Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-20 01:58:51 -05:00
Scott Lahteine	206014a957	Fix LPC176x timer functions Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-20 01:58:51 -05:00
Scott Lahteine	59f7861bcb	Move backtrace to the HAL folder (#10790 )	2018-05-20 01:33:21 -05:00
Scott Lahteine	228139eae6	Tweak some LCD comments	2018-05-19 21:00:08 -05:00
Scott Lahteine	7dc03ce721	Simplified fix for babystep pulse width Alternative to the apparently superfluous double delay	2018-05-19 21:00:08 -05:00
Scott Lahteine	65270d6a96	Fix LIN_ADVANCE + SWITCHING_EXTRUDER Followup to #10656	2018-05-19 18:32:00 -05:00
Bob Kuhn	62e2987488	add AT90USB support & add items to popup menu (#10779 )	2018-05-19 17:39:26 -05:00
Bob Kuhn	9ad42d6617	add delay between pulse edges (#10778 )	2018-05-19 17:12:16 -05:00
Scott Lahteine	83d42f33e1	Add HAS_HOTEND_OFFSET_Z conditional	2018-05-19 17:05:15 -05:00
GMagician	3c76bda2d8	Fix switching extruder `DONT_SWITCH` got lost along the way. Replace it with `DO_SWITCH_EXTRUDER` and adjust the code.	2018-05-19 17:05:15 -05:00
Scott Lahteine	c173a31060	Fix some compile warnings	2018-05-19 16:54:48 -05:00
Giuliano	e1d9046efc	[2.0.x] Temperature reading fix (#10774 )	2018-05-19 15:39:36 -05:00
Chris Pepper	9b64fdbc3a	[LPC176x] HAL: Add missing program space definition (#10776 )	2018-05-19 15:37:54 -05:00
Scott Lahteine	50270b53a0	Clear up some more compile warnings	2018-05-17 18:40:49 -05:00
etagle	06fd4d7b28	Improve NOMORE, NOLESS, and LIMIT macros	2018-05-17 18:23:14 -05:00
etagle	40d7e12827	Removing warnings from compilation	2018-05-17 18:04:22 -05:00
Scott Lahteine	0755fe8ba2	Add FAN_MAX_PWM to example configs	2018-05-15 21:18:47 -05:00
Jiri Jaburek	43ddb29f9e	Add FAN_MAX_PWM for M106-controlled fans	2018-05-15 21:18:46 -05:00
Scott Lahteine	0ea60d506a	Clear up LCD-related compile issues	2018-05-15 00:06:59 -05:00
Scott Lahteine	eb2eb72720	Modify UBL mesh_is_valid and use in leveling_is_valid (#10746 )	2018-05-14 22:36:03 -05:00
Scott Lahteine	b7dfc79988	Disable SERIAL_PORT_2 by default and sanity-check it (#10748 )	2018-05-14 21:38:24 -05:00
Scott Lahteine	3f6073e23a	Followup tweak to lcdprint_u8g.cpp	2018-05-14 14:42:11 -05:00
Scott Lahteine	fb608938f8	Prevent compilation of unused u8g-oriented code	2018-05-14 13:31:04 -05:00
Scott Lahteine	35258dd50b	Consistent heating status and status reset Fix #10699	2018-05-13 17:18:19 -05:00
Scott Lahteine	37b15fe4cf	Reorder HAL timer header items	2018-05-13 16:50:39 -05:00
Scott Lahteine	836b0bbeee	Fix MBL line_to_destination Fix #10708	2018-05-13 16:50:39 -05:00
Scott Lahteine	ba4c32eec5	Followup to _AXIS patch	2018-05-13 10:43:35 -05:00
Scott Lahteine	d9154ebdf6	Followup to math patch	2018-05-13 09:30:27 -05:00
Scott Lahteine	f07260c33f	Don't babystep on long click unless printing As pointed out in #10731	2018-05-13 08:11:35 -05:00
Scott Lahteine	883b0c9880	Convert custom maths to inlines (#10728 )	2018-05-13 08:10:08 -05:00
Scott Lahteine	08e36e264e	Apply _AXIS macro	2018-05-13 06:51:01 -05:00
Scott Lahteine	99ecdf59af	Smarter MIN, MAX, ABS macros Use macros that explicitly avoid double-evaluation and can be used for any datatype, replacing `min`, `max`, `abs`, `fabs`, `labs`, and `FABS`. Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-13 04:52:56 -05:00
Scott Lahteine	083ec9963e	Tweaks to heater / lcd conditions	2018-05-13 04:52:56 -05:00
etagle	9d98a62699	Followup to HAL optimizations and delays - Cleanups, fixes for Due HAL code. - TC_IER is write-only. Use TC_IMR to test ISR state.	2018-05-13 00:46:23 -05:00
Scott Lahteine	8f8c6a9bc4	Move get_axis_position_mm to Planner (#10718 )	2018-05-12 09:59:11 -05:00
Scott Lahteine	a1062eec5b	Better handling of DELAY_NS and DELAY_US (#10716 ) Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-12 08:34:04 -05:00
Scott Lahteine	f5aaa2d6c0	Fix some compiler warnings	2018-05-12 05:28:12 -05:00
Scott Lahteine	3614e6ce0f	Fix Switching Extruder with Linear Advance	2018-05-12 02:26:14 -05:00
Scott Lahteine	625035a9ce	Fix M301 access to lpq_len (#10714 ) Co-Authored-By: Zwaubel	2018-05-12 02:13:40 -05:00
etagle	1b225a2809	DUE: Emergency parser for the USB CDC	2018-05-12 02:12:11 -05:00
Scott Lahteine	306f0f2135	Move Stepper::synchronize to Planner (#10713 ) Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-12 01:38:02 -05:00
Scott Lahteine	f2e3c9896e	Fix compile warnings in backtrace Part of #10688 Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-11 23:38:29 -05:00
Scott Lahteine	acacee80a2	Add JUNCTION_ACCELERATION_FACTOR to configs Part of #10688 Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-11 23:13:27 -05:00
Giuliano	d99f1b2245	[2.0.x] EEPROM code cleanup (#10710 )	2018-05-11 18:06:04 -05:00
ManuelMcLure	8679f671ed	Remove dependency on PI. (#10701 )	2018-05-11 17:55:56 -05:00
Scott Lahteine	6671c064cd	Use arc moves for G26 if enabled (#10696 ) Co-Authored-By: ManuelMcLure <manuelmclure@users.noreply.github.com>	2018-05-11 02:15:14 -05:00
Scott Lahteine	325bbbc8c2	[2.0.x] Enable AD595 and AD8495 in concert (#10693 ) * Allow both AD595 and AD8495 in concert * General temperature code tweaks	2018-05-11 01:01:51 -05:00
Scott Lahteine	c43235dd39	Remove non-special comments	2018-05-11 00:36:04 -05:00
ManuelMcLure	613a3be167	Remove hidden dependencies on destination. Fixes #10686 . (#10691 )	2018-05-11 00:30:51 -05:00
Scott Lahteine	23a876b08d	Update a comment in motion.cpp	2018-05-10 15:03:37 -05:00
Scott Lahteine	439e0cdd0f	Patch up reverse_pass_kernel (and other planner code) (#10674 )	2018-05-10 01:30:55 -05:00
Scott Lahteine	fe5c308872	Correction to Printrboard SDSS pin (#10677 ) Co-Authored-By: Simon Swenson <simon-swenson-8351@users.noreply.github.com>	2018-05-10 01:28:55 -05:00
Scott Lahteine	265161ba30	Blink the value for unhomed/unknown axes (#10670 )	2018-05-10 01:19:20 -05:00
Scott Lahteine	57c2f8d2f6	Trailing whitespace cleanup	2018-05-10 00:17:10 -05:00
Scott Lahteine	b76344c080	More Trinamic cleanup	2018-05-10 00:12:10 -05:00
Scott Lahteine	473c6d3a91	Drop extra RIGIDBOT_PANEL from D6 config	2018-05-09 18:02:07 -05:00
Giuliano	44f3a6dc3b	[2.0.x] Add missing axes to M911, M912 (#10668 )	2018-05-09 17:58:11 -05:00
Scott Lahteine	722aba77f3	Fix LIN_ADVANCE + SWITCHING_EXTRUDER stepper directions (#10656 )	2018-05-09 14:36:09 -05:00
Scott Lahteine	a225d2e99e	Fix compilation with UBL and Arc/Bézier Fix #10660	2018-05-09 00:40:37 -05:00
Scott Lahteine	6d9ec1852a	Fix compilation of say_units Fixes #10663	2018-05-09 00:30:29 -05:00
Scott Lahteine	19f189b4e5	Add UBL support for G2/G3 and G5 (#10648 )	2018-05-08 11:10:45 -05:00
Scott Lahteine	4c663b0216	Add JUNCTION_DEVIATION to example configs	2018-05-08 10:08:54 -05:00
Scott Lahteine	4d4bf7897d	Junction Deviation jerk limiting option	2018-05-08 10:08:54 -05:00
Scott Lahteine	0436e16fb2	Apply shorthand Assembler macros	2018-05-08 10:08:54 -05:00
Scott Lahteine	d1b619be52	Standardize some hexadecimals	2018-05-08 09:19:18 -05:00
Scott Lahteine	ec05408453	Add 3-frame fan animation to bitmaps (#10654 )	2018-05-08 09:06:01 -05:00
Scott Lahteine	55f1f8446b	Show correct current units in M503	2018-05-08 06:29:53 -05:00
Giuliano	4e16e699c1	Fix sanity checks for dual axes (#10633 )	2018-05-07 03:34:26 -05:00
Scott Lahteine	a1fab8336e	Fix abort of SD printing	2018-05-07 02:52:26 -05:00
Scott Lahteine	e978e6e782	[2.0.x] Arrange LCD options by type (#10630 )	2018-05-06 19:16:55 -05:00
Scott Lahteine	8c5bc77fb9	Fix the sanity-check for config versions	2018-05-06 09:37:00 -05:00
Scott Lahteine	1f11b0f612	Fully init planner sync block	2018-05-06 08:16:54 -05:00
Scott Lahteine	f30241bda5	Merge pull request #10614 from thinkyhead/bf2_synced_planner_set_position [2.0.x] Improve sync of planner / stepper position, asynchronous G92	2018-05-06 03:10:43 -05:00
Scott Lahteine	840ff60952	Bring some configs up to date	2018-05-06 02:42:27 -05:00
Phr3d13	71cd681473	Add Geeetech i3 Pro C / W examples (#10626 ) Added base example configs for Geeetech's Pro C and Pro W machines.	2018-05-06 02:07:54 -05:00
Scott Lahteine	62e7a9c671	Fix up fwretract handling	2018-05-06 01:24:14 -05:00
Scott Lahteine	bfe223e120	Adjust usage of stepper.synchronize	2018-05-06 01:24:14 -05:00
Scott Lahteine	af1950a63e	Improve sync of stepper positions	2018-05-06 01:24:14 -05:00
Scott Lahteine	0c23792344	Apply int32_t to stepper	2018-05-05 18:21:03 -05:00
Roxy-3D	c2c02bdc67	Change Max7219 coordinates to traditional (X,Y)	2018-05-05 16:08:54 -05:00
Scott Lahteine	b337698f96	Additional patch for no heated bed	2018-05-04 00:15:37 -05:00
Scott Lahteine	76da6cc544	Fix Ender 2 build volume	2018-05-02 19:03:29 -05:00
Scott Lahteine	81b632c255	Additional temp-oriented improvements	2018-05-02 08:43:22 -05:00
nightdemonx	e911635fb1	Add thermocouple with AD8495 support	2018-05-02 08:43:16 -05:00
Scott Lahteine	00e86f1c2d	Add Velleman RGB-LED strip support to K8400	2018-05-02 08:10:48 -05:00
Bob-the-Kuhn	410b023b50	[2.0.x] Add Viki support to RAMPS_FD_V1 (DUE) (#10598 )	2018-05-02 07:54:06 -05:00
Scott Lahteine	b7e938a9fb	LCD_BED_LEVELING enables a sub-menu for ABL	2018-05-01 07:13:56 -05:00
Scott Lahteine	a90d99c27c	Rename float32 => float52, etc.	2018-05-01 07:08:47 -05:00
Scott Lahteine	d7b699ec34	Fewer includes of vector_3.h	2018-05-01 07:05:18 -05:00
thisiskeithb	9312636ee4	Ender-3 config files (#10585 )	2018-05-01 06:44:50 -05:00
Scott Lahteine	05fca752d6	Clean up autostart handling	2018-05-01 01:35:57 -05:00
Scott Lahteine	c87b0e21be	Add units to probe speed comments	2018-04-30 23:50:28 -05:00
Scott Lahteine	2c1205d8b1	Improve debug of homing move feedrate	2018-04-30 23:49:51 -05:00
Scott Lahteine	c8e4b7c8a6	Fix XY homing move away rate	2018-04-30 23:49:07 -05:00
Scott Lahteine	05c33833e7	[2.0.x] Add NO_LCD_MENUS option (#10582 )	2018-04-30 21:16:31 -05:00
Scott Lahteine	524cc392f4	Fix sd_status comparison Co-Authored-By: perkmeister <perkmeister@users.noreply.github.com>	2018-04-30 21:09:50 -05:00
MagoKimbra	1f92b9a4ed	Fix do_probe_move with fr_mm_s (#10576 )	2018-04-30 16:28:20 -05:00
Scott Lahteine	a73cece360	Fix utility.cpp for DEBUG_LEVELING_FEATURE As mentioned in https://github.com/MarlinFirmware/Marlin/issues/9429#issuecomment-385305597 Co-Authored-By: Jack Bradach <jack@bradach.net>	2018-04-30 03:40:50 -05:00
Scott Lahteine	4dfc011d86	Fix homing with probe feedrates	2018-04-30 03:35:07 -05:00
Scott Lahteine	59fda986ea	Allow Z_AFTER_PROBING to be 0	2018-04-30 03:25:47 -05:00
Scott Lahteine	63e4afc910	Do rounding in integer (instead of FIXFLOAT) Co-Authored-By: Bob-the-Kuhn <bob-the-kuhn@users.noreply.github.com>	2018-04-29 19:33:26 -05:00
Scott Lahteine	616651ff23	Add sanity check for LED_CONTROL_MENU Addressing #10569	2018-04-29 18:34:57 -05:00
Scott Lahteine	9e0d99c0c6	Round all floats in string conversion functions (#10566 )	2018-04-29 00:51:36 -05:00
Scott Lahteine	3f68203324	Modify FastIO error message	2018-04-28 20:27:36 -05:00
Scott Lahteine	1dab44213a	Fix the TMC26X initializer CS pin argument From #10531 Co-Authored-By: chriscg9 <chriscg9@users.noreply.github.com>	2018-04-28 12:02:45 -05:00
Scott Lahteine	cd08f01bb4	Fix M421 comment in gcode.h	2018-04-28 11:16:52 -05:00
Scott Lahteine	7546f87949	Allow a home bump of 0 when homing Z with probe	2018-04-28 10:26:31 -05:00
Scott Lahteine	d470a1234f	Fix ENABLED/DISABLED for DUE …and any other platforms where `false`/`true` are defined as `0x0`/`0x1`. This fixes issue #10550.	2018-04-28 10:12:37 -05:00
Scott Lahteine	683dc24e0f	When homing with Z probe bump at Z_PROBE_SPEED_SLOW	2018-04-28 08:50:23 -05:00
Scott Lahteine	8db7fb226a	Fix M420 C for UBL	2018-04-28 08:14:20 -05:00
Scott Lahteine	ed8d2bc225	Clean up some endstop inverting examples	2018-04-28 08:04:43 -05:00
Scott Lahteine	c7305be4d2	Fix some endstop inverting settings	2018-04-28 08:04:33 -05:00
Bob-the-Kuhn	f973ff49ae	[2.0.x] MKS SBASE - Separate SD_DETECT for LCD and on-board SD cards (#10557 )	2018-04-28 07:24:07 -05:00
Scott Lahteine	5ac226aa93	Further cleanup of inline delays	2018-04-27 19:22:22 -05:00
Marcio Teixeira	724e9f56c8	Removed "const" to match parser. (#10548 )	2018-04-27 17:48:52 -05:00
Giuliano	2e1939e85c	[2.0.x] report error on unsupported commands (#10553 ) Raise an error when an unknown/unsupported G/M command is requires. This will address #10546	2018-04-27 17:40:27 -05:00
Scott Lahteine	a474a7e675	Correct AVR_ATmega328_FAMILY macro …as with #10540 Co-Authored-By: per1234 <per1234@users.noreply.github.com>	2018-04-27 03:13:46 -05:00
Scott Lahteine	f790b4bc0a	Reorganize some conditionals	2018-04-27 02:23:11 -05:00
Scott Lahteine	a51ba6e3f6	Fix ABL grid bounds test for Delta/SCARA Addressing #10538	2018-04-27 02:23:10 -05:00
Scott Lahteine	df6bc812b5	Fix disable of Z_HOMING_SENSITIVITY for HOMING_Z_WITH_PROBE As pointed out in #10532	2018-04-27 02:23:10 -05:00
Scott Lahteine	63e0b36f8b	Fix G29_RECOVER_COMMANDS typo	2018-04-27 02:23:10 -05:00
Scott Lahteine	f83361a814	Apply const to tmc_sensorless_homing	2018-04-27 02:23:10 -05:00
Scott Lahteine	212e52e485	Basic delay for Max7219 on ARM	2018-04-27 00:41:29 -05:00
Scott Lahteine	7b6e742436	Wrap delay macros in do{}while(0)	2018-04-26 18:18:23 -05:00
Karl Andersson	58ca3be1ec	delayMicroseconds() cannot be called in critical section (#10535 ) on the STM32 platform	2018-04-26 14:31:01 -05:00
Bob-the-Kuhn	00dfaae8df	[2.0.x] Platformio - automate build & environment selection (#10503 )	2018-04-26 02:42:06 -05:00
Scott Lahteine	299c4fed42	Undefine PIDTEMPBED without a bed heater	2018-04-26 01:30:10 -05:00
Scott Lahteine	456cf971af	HAL FastIO cleanup and fixes	2018-04-26 00:40:16 -05:00
J.C. Nelson	5b5e322356	Set Interrupt Priorities and Grouping for STM32F103. (#10517 )	2018-04-26 00:21:16 -05:00
Scott Lahteine	0e450df6a2	MKS OLED support for RUMBA Based on #10519 Co-Authored-By: Alex <alex18881@users.noreply.github.com>	2018-04-25 23:00:44 -05:00
Scott Lahteine	2578996631	[2.0.x] Emergency parser for multiple serial ports (#10524 )	2018-04-25 20:58:00 -05:00

... 12 13 14 15 16 ...

9904 commits