Marlin-Artillery-M600

Archived

Author	SHA1	Message	Date
Scott Lahteine	38363902c7	Fix sanity checks for distinct E factor settings Reference #13156	2019-02-25 00:20:36 -06:00
Scott Lahteine	64253e1a58	Followup to serial reform Reference #13250	2019-02-25 00:20:36 -06:00
Minims	92a4984066	Fix G34 probe position (#13251 )	2019-02-24 13:57:30 -06:00
Scott Lahteine	e15354e387	Simplify serial port redirect (#13234 )	2019-02-23 22:53:01 -06:00
Chris Pepper	88cc1d1a31	Fix Preprocessor syntax in Re-ARM pins file (#13247 )	2019-02-24 01:36:58 +00:00
Karl Andersson	76e9ee33aa	Fix include order to make SERIAL_PORT_2 work (#13241 )	2019-02-23 16:56:09 -06:00
Bruce j Beare	562f2321d2	Fix a G34 bug, allow negative Z corrections (#13240 )	2019-02-23 02:41:52 -06:00
FernandoVelcic	edf025ed8d	Update Spanish language (#13236 )	2019-02-23 00:41:02 -06:00
Scott Lahteine	02fec89a0d	Turn fans off in zero_fan_speeds Addressing #13231	2019-02-22 21:00:44 -06:00
Scott Lahteine	15aa932aa6	HAL for Linux (#13146 )	2019-02-22 19:09:10 -06:00
kwalters3	5eb82ca6a8	Change SSD1306_OLED_I2C_CONTROLLER to HAS_SSD1306_OLED_I2C (#13223 )	2019-02-22 19:08:36 -06:00
Marcio Teixeira	109e67169c	Define G21 as NOOP w/o INCH_MODE_SUPPORT (#13229 ) Ticket #13228 If `INCH_MODE_SUPPORT` is undefined, G20 is an unknown command as it should be (Marlin is, by default, operating in metric mode). G21, however, is found in many slicers and printer start gcode sections and should be accepted (as a NOOP) to avoid the unknown commands.	2019-02-22 15:35:32 -06:00
AnHardt	31b0be74af	Fix autotemp_factor menu setting (#13226 ) Fix #12643 Only factors above 1 can have a 'positive' effect.	2019-02-22 15:30:17 -06:00
Evgeny-SPB	f6ab62bc13	Fix Creality CR-10 S5 filament change (#13219 )	2019-02-21 05:40:49 -06:00
Thomas Moore	9f5e4e5ad8	Update LPC1769 Pins Files (#13183 )	2019-02-21 00:54:05 -06:00
Greg Nutt	608a6810e7	Fix DOGLCD_A0 pin in pins_Smoothieboard.h (#13217 )	2019-02-20 18:08:49 -06:00
Scott Lahteine	80359c9937	Add more parameters to M240 Co-Authored-By: shitcreek <45380455+shitcreek@users.noreply.github.com>	2019-02-20 14:51:36 -06:00
Scott Lahteine	a43e892fb5	Use 8-bit i2c address on LPC platform Fix #9799 — hopefully not a unicorn	2019-02-20 06:27:26 -06:00
Scott Lahteine	631d867dc9	HAL cleanups	2019-02-20 06:27:26 -06:00
Scott Lahteine	89bbc30a09	Fix init of power supply pin Fix #13184	2019-02-20 05:29:05 -06:00
Scott Lahteine	44c22e3935	Provide a default MAX6675_SS_PIN for ReARM See #8010	2019-02-20 05:06:06 -06:00
Scott Lahteine	3c9a7926c2	Fix compile error with JUNCTION_DEVIATION See #13000	2019-02-20 04:54:26 -06:00
Scott Lahteine	758c6c9464	Very minor SPI speedup	2019-02-20 04:36:23 -06:00
Scott Lahteine	422dd6666e	Fix Due EEPROM write bug See #13065	2019-02-20 04:36:23 -06:00
Scott Lahteine	03e109c4a3	FLASH_EEPROM => FLASH_EEPROM_EMULATION	2019-02-20 04:36:23 -06:00
Scott Lahteine	50917ccda6	Tweak some u8g interface code	2019-02-20 04:26:34 -06:00
LinFor	ba39186364	TMC_DEBUG optimization and improvements (#13135 )	2019-02-20 02:22:42 -06:00
Scott Lahteine	1424b368cf	Tweak M122 comment in configs	2019-02-19 16:20:18 -06:00
Scott Lahteine	3a1b6fe8c1	Coding standards	2019-02-19 14:58:39 -06:00
InsanityAutomation	19af90face	Fix a host action compile error (#13208 )	2019-02-19 14:47:31 -06:00
Marcio Teixeira	992cdc8d14	Fix host action / G-code ordering in event_probe_failure (#13207 ) Observing from the console, it makes the most sense to do `//action:probe_retry` before executing commands.	2019-02-19 14:45:03 -06:00
InsanityAutomation	33a6d52965	Fix a RAPTOR2 pin conflict (#13205 )	2019-02-19 14:42:02 -06:00
InsanityAutomation	52665f54ad	Fix bad Purge More logic (#13193 )	2019-02-19 14:37:18 -06:00
Scott Lahteine	18458ec42b	Error in Smoothieboard for unsupported display	2019-02-19 14:17:33 -06:00
InsanityAutomation	d4ed9b3ef1	Babystep also requires homing (#13191 )	2019-02-17 14:35:45 -06:00
InsanityAutomation	ca7b2f574f	Fix condition on tool change filament swap menu (#13190 )	2019-02-17 12:33:46 -06:00
Roman Moravčík	208ab8b366	Fix compilation with one service interval (#13185 )	2019-02-17 12:32:47 -06:00
Roman Moravčík	567d03a269	Update Slovak language (#13187 )	2019-02-17 12:29:49 -06:00
Alain Martel	27203c62b8	Enable M240, set photo pins for 3DFabXYZ i3 (#13174 )	2019-02-15 21:16:39 -06:00
Evgeny-SPB	3025ddf179	Support for Creality CR-10 5S (#13173 )	2019-02-15 21:09:44 -06:00
Scott Lahteine	e00aad84af	Add M240 parameters D I J R S	2019-02-14 20:00:40 -06:00
Marcio Teixeira	31c240a8db	Enhancements to G425 (#13159 ) - Turn off bed leveling prior to calibrating. - This prevents lateral probes from having a Z component that triggers the Z endstop and causes the motion to be aborted. - Got rid of static const float arrays "dimension" and "true_center" - Frees up 24 bytes of SRAM - Changed incorrect use of "bool" for float in backlash macros. - Replaced arguments with 0.0f and 1.0f for clarity. - Now only disables soft endstops (since calibration cube is outside of bed) - Not necessary to disable global endstops	2019-02-14 16:45:31 -06:00
Andy Shaw	84fc400aba	Update BIQU SKR V1.1 pins, add TMC2130 settings (#13166 ) * Remove untested displays add TMC2130 configs. * Remove references to the ReARM, delete untested displays. Add TMC2130 settings. Cleanup spacing, etc.	2019-02-14 16:43:56 -06:00
Scott Lahteine	ab2816c870	Patch for M240	2019-02-14 15:13:57 -06:00
Scott Lahteine	d2bdb71c13	Add PHOTO_GCODE option, photo trigger physical move (#13168 )	2019-02-14 15:09:35 -06:00
Scott Lahteine	be9a409980	Fix M125 XY parameters, export get_homing_bump_feedrate	2019-02-14 05:25:46 -06:00
Scott Lahteine	ce40c2e87c	Use do_blocking_move_to(ref, fr)	2019-02-14 02:22:08 -06:00
Giuliano Zaro	bdc2f10b90	Update Italian language, fix unused var warning (#13164 )	2019-02-13 21:05:18 -06:00
Marcio Teixeira	9f0e1834ec	Followup to #13039 (#13163 ) - Fix compile error when accessing `process_subcommands_now_P`. - Use `const` var eliminating double-negative (to make code more understandable).	2019-02-13 20:39:38 -06:00
Ludy	1ace97e946	[2.0.x] Update German language (#13150 )	2019-02-13 20:31:50 -06:00
Scott Lahteine	7cf9b93f26	Add HAS_FILAMENT_SENSOR ahead of 12962	2019-02-12 20:13:20 -06:00
Giuliano Zaro	2c8d12d3ec	Update Italian language (#13148 )	2019-02-12 18:40:34 -06:00
Scott Lahteine	c2b90c44e4	Prettify some code comments	2019-02-12 17:43:37 -06:00
Scott Lahteine	a0dadc8c62	Smaller I2CPositionEncoder strings	2019-02-12 16:21:56 -06:00
Scott Lahteine	18996d2595	Fix some spelling	2019-02-12 16:21:56 -06:00
revilor	e56c13670d	Service interval watchdog (#13105 )	2019-02-12 15:58:56 -06:00
InsanityAutomation	7f1b69b0c8	Add HOST_PROMPT_SUPPORT (#13039 )	2019-02-12 15:55:47 -06:00
Scott Lahteine	0feeef2604	Update copyright in headers	2019-02-12 15:30:11 -06:00
Scott Lahteine	894f5c24a8	Fix trailing whitespace	2019-02-12 14:25:57 -06:00
Roman Moravčík	bace52afd7	Fixed compilation with MMU2_MENUS disabled (#13140 )	2019-02-12 12:55:49 -06:00
Ludy	584f9cd449	Update German language (#13137 )	2019-02-12 12:54:57 -06:00
Scott Lahteine	d9a3fea022	Comments in HAL_spi_STM32F1.cpp	2019-02-11 18:06:33 -06:00
Giuliano Zaro	773fa5c40f	Fix define used when PID is off (#13119 ) Replaced `PID_MAX` with `BANG_MAX` since it should be the correct define to be used when PID is not enabled.	2019-02-11 17:29:17 -06:00
Giuliano Zaro	f7efe6f6c5	[2.0.x] Fix TEMP_STAT_LED startup init (#13120 )	2019-02-11 17:27:59 -06:00
Ludy	2bd6ce4b62	Update German language (#13125 )	2019-02-11 17:08:21 -06:00
Giuliano Zaro	27115ff7eb	Update Italian language (#13123 ) Incomplete.	2019-02-11 17:07:21 -06:00
Roman Moravčík	08a8bd10ca	Updated Slovak translation (#13122 )	2019-02-11 17:06:10 -06:00
Scott Lahteine	3e2a4c3b26	Show mixer and temperature menus while printing	2019-02-11 16:52:47 -06:00
Scott Lahteine	8d271f20fe	C10mini E steps of 95 See https://www.patreon.com/posts/creality-cr10-24602624	2019-02-10 14:23:05 -06:00
Scott Lahteine	9737608f0a	Enable gradient when alias is cleared	2019-02-10 06:39:12 -06:00
Simon Jouet	5cd0fa3ce1	Basic GPIO expander using the ESP32 I2S peripheral (#12959 )	2019-02-10 05:40:31 -06:00
Scott Lahteine	3983cacbcf	No extern needed for func decl	2019-02-10 05:38:27 -06:00
Scott Lahteine	43b29c093b	Update pinsDebug_list.h with XY PWM pins	2019-02-10 05:13:05 -06:00
Scott Lahteine	166e567ab8	Fix HAS_MOTOR_CURRENT_PWM	2019-02-10 05:06:46 -06:00
Scott Lahteine	6de3d34378	M166 Gradients, LCD Menu for 2-channel Mixer (Geeetech A10M/A20M) (#13022 )	2019-02-10 04:54:23 -06:00
LinFor	7ee35c2611	PID_MENU option to save PROGMEM in LCD menus (#13095 )	2019-02-10 04:03:18 -06:00
Ludy	936f982392	Update German Language (#13110 )	2019-02-10 03:55:08 -06:00
AnHardt	0e37fe8776	Apply minimum C in M303 (#13113 ) Apply minimum `C` in `M303`. `PID_autotune()` needs to be called with a 'C'ycles-parameter >2 to give meaningful (different from 0) PID-factors. Therefore silently raise C to 3. Fixing one aspect of #13104	2019-02-10 03:54:45 -06:00
Scott Lahteine	5a316664e5	Update chopper timing	2019-02-10 03:12:20 -06:00
Scott Lahteine	fcb16ceb29	Update default config	2019-02-10 00:20:11 -06:00
Alain Martel	9ae7cca5e9	Disable RGB_LED for 3DFabXYZ (#13097 )	2019-02-08 15:18:20 -06:00
Scott Lahteine	f3b6cb4d34	Clean up, update config comments	2019-02-08 15:13:52 -06:00
Scott Lahteine	ae03753ef1	Fix PCA9533 with PRINTER_EVENT_LEDS	2019-02-08 15:13:52 -06:00
Scott Lahteine	95d3f3953a	DEFAULT_WEBSITE_URL => BOARD_WEBSITE_URL	2019-02-08 14:54:34 -06:00
Scott Lahteine	6ddd81c178	[2.0.x] Update German Language (#13100 ) add MMU2	2019-02-08 14:25:24 -06:00
Giuliano Zaro	7c9ff322f3	Update Italian language (#13099 )	2019-02-08 14:23:37 -06:00
Ludy	ce8cb6a5d9	[2.0.x] Update German Language add MMU2	2019-02-07 20:04:34 +01:00
Scott Lahteine	f269766408	Put the MMU2 menu with the others	2019-02-06 17:38:46 -06:00
Marcio Teixeira	e1604198ff	G425 — Auto-calibrate Backlash and Nozzle Offsets (#13050 )	2019-02-06 17:20:17 -06:00
Marcio Teixeira	113af46a1b	Add ExtUI methods to babystep probe/nozzle offsets (#12590 )	2019-02-06 07:16:54 -06:00
InsanityAutomation	413e303ad5	More Advanced Pause options (#12984 )	2019-02-06 06:39:42 -06:00
Mark Zachmann	19cf72e057	Support individual solenoid disable with M381 (#13008 )	2019-02-06 06:34:53 -06:00
teemuatlut	d81342254a	Support new TMC drivers (#13026 )	2019-02-06 06:33:14 -06:00
Scott Lahteine	e1587da228	Clean up HAL_spi_Due.cpp (#13087 )	2019-02-06 06:31:31 -06:00
Rolf Werum	524c6c10bf	MAGNETIC_PARKING_EXTRUDER (#12351 )	2019-02-06 06:30:53 -06:00
Scott Lahteine	1bd9a63049	Add HAS_EXTRA_ENDSTOPS macro	2019-02-06 05:10:05 -06:00
Scott Lahteine	3c49396370	Fix compile error with DUE + MAX6675 (#13086 )	2019-02-05 22:56:13 -06:00
Roxy-3D	ab6908a513	Fix Probe Offset bug...	2019-02-05 20:30:20 -07:00
revilor	69aaf5d096	MMU2 fixes (#13082 )	2019-02-05 20:56:22 -06:00
Scott Lahteine	2f8e89adc3	Remove extraneous ui. prefixes	2019-02-05 19:04:37 -06:00
Scott Lahteine	870757aa17	Tweaks to pins_GT2560_V3.h	2019-02-04 22:52:50 -06:00
Scott Lahteine	b96cc30cd0	HAL spacing tweak	2019-02-04 21:51:06 -06:00
Scott Lahteine	9e394139e5	Followup to `90911104`	2019-02-04 10:46:52 -06:00
Sam Lane	b35a7c2c87	Fixed closed-loop planner stall (#13005 )	2019-02-04 07:43:09 -06:00
Ludy	691e925adc	Update German language (#13012 )	2019-02-04 07:25:07 -06:00
Scott Lahteine	1497fb388a	M29 match logic was reversed (#13013 ) * M29 logic was reversed If in card-saving mode generate errors line errors for anything that's NOT "M29 ?" * Update queue.cpp * Update queue.cpp	2019-02-04 07:23:42 -06:00
Scott Lahteine	b5fd2fb58b	Allow M29 to be processed late	2019-02-04 07:23:02 -06:00
Scott Lahteine	c03bac9ad4	Update queue.cpp	2019-02-04 07:17:40 -06:00
Scott Lahteine	a49f0205ea	Update queue.cpp	2019-02-04 07:11:08 -06:00
Andy Shaw	9091110460	LPC1768 - Don't change CS pin state (#13015 )	2019-02-04 07:08:39 -06:00
Scott Lahteine	10d855cb21	Sanity check USER_GCODE formatting	2019-02-04 06:36:41 -06:00
Scott Lahteine	d97bb4c41c	Followup to `e10943d0`	2019-02-04 06:11:31 -06:00
jeffstaley	2f176d6fb8	Flush RX buffer on G-code line errors to prevent hang (#13018 )	2019-02-04 06:03:49 -06:00
Scott Lahteine	ca73b2f465	Add static assert to catch errors in COPY(a,b)	2019-02-04 05:52:32 -06:00
Nathan	df1043516e	Fix the delta homing issue (#12974 )	2019-02-04 05:25:50 -06:00
Scott Lahteine	4200bd2fc1	Report on M92 with no arguments (#12833 )	2019-02-04 05:24:15 -06:00
Scott Lahteine	e10943d0d8	Minor tweak to main menu	2019-02-04 04:58:31 -06:00
Scott Lahteine	d4d1b28a06	Fix some include paths	2019-02-04 03:57:15 -06:00
Scott Lahteine	0d720a6ff4	Tweak to emergency_parser.h	2019-02-04 03:56:56 -06:00
Scott Lahteine	0a7ea7063f	Hide Resume Print when not relevant	2019-02-04 03:02:44 -06:00
Scott Lahteine	afe79ba22b	Minor code cleanup	2019-02-04 02:23:06 -06:00
Scott Lahteine	fdb97a3e9c	Add class and macro to save and auto-restore a variable	2019-02-04 02:23:06 -06:00
Scott Lahteine	433518de74	Prevent M420 error from disconnecting OctoPrint Just echo the error instead of labeling it `Error:`.	2019-02-04 01:54:43 -06:00
Marcio Teixeira	5cfc1cdacc	Support SWITCHING_NOZZLE with 2 servos (#13054 )	2019-02-04 00:19:56 -06:00
Psycho	3c88cac2e9	Velleman Vertex Delta pins (#13072 )	2019-02-04 00:15:08 -06:00
Nicolas G	6fb4001b58	Add option to disable fan speed slowing in M303 (#13066 )	2019-02-04 00:12:41 -06:00
Scott Lahteine	ca1be02bf0	Tweak some pins formatting	2019-02-04 00:06:41 -06:00
Scott Lahteine	38c2ca9281	Clean up trailing whitespace	2019-02-03 23:00:57 -06:00
Mark Zachmann	4d1093b386	Fix init of last_direction_bits (#13067 )	2019-02-03 01:29:00 -06:00
Scott Lahteine	4fa1c52688	Tweak serial output code	2019-02-03 01:09:14 -06:00
Scott Lahteine	a5e3384691	Pre-apply cosmetic changes to mixing	2019-02-03 01:09:14 -06:00
Scott Lahteine	0358ffcd4c	Drop E element from `homing_feedrate_mm_s`	2019-02-02 15:55:00 -06:00
Scott Lahteine	95223cb28e	Remove dead code from stepper.h These values are always supplied by `Conditionals_post.h`.	2019-02-02 15:35:05 -06:00
mattfredwill	c3cb449990	TMC2130 dual-stepper Sensorless Homing (#13061 )	2019-02-01 18:09:01 -06:00
Marcio Teixeira	f6edd2c472	Move stepper settings to "Advanced Settings" menu (#13063 )	2019-02-01 18:07:04 -06:00
InsanityAutomation	68bbac207e	Update pins_FORMBOT_TREX3.h (#13058 )	2019-02-01 18:06:02 -06:00
revilor	6a57d0b381	Prusa MMU2 (#12967 )	2019-01-31 19:10:52 -06:00
Scott Lahteine	996f7d1642	Fix I2C_POSITION_ENCODERS commentary	2019-01-30 22:17:17 -06:00
raTmole	988b5aa4e6	Update GT2560 V3 pins (#13036 )	2019-01-30 21:10:56 -06:00
InsanityAutomation	7d927b6691	Move Z Probe Z Offset from Advanced to basic Configuration (#13056 )	2019-01-30 21:08:36 -06:00
Giuliano Zaro	31e213e427	Always show Tune sub-menu (#13049 )	2019-01-30 21:05:55 -06:00
teemuatlut	f0503372d9	Revert E_AXIS_N cast (#13055 )	2019-01-30 20:55:05 -06:00
InsanityAutomation	a1d03fe7ba	Fix single nozzle fan (#13038 )	2019-01-30 20:54:04 -06:00
Scott Lahteine	159d7eefda	New boards entry for the A20M	2019-01-28 21:08:20 -06:00
Scott Lahteine	97da6c1da5	Use MIN/MAX for min/max	2019-01-28 20:36:13 -06:00
Scott Lahteine	17a8c37148	Label menu edit items	2019-01-28 20:20:46 -06:00
raTmole	ddeca7a358	Fix resume from power loss G-Code. (#13035 )	2019-01-28 13:19:26 -06:00
Thomas Moore	02ab66fca3	Update Cohesion3D Pins Files (#13027 )	2019-01-27 23:11:33 -06:00
Giuliano Zaro	a79d80c78e	Minor cleanup of pause code (#13030 )	2019-01-27 23:10:25 -06:00
jeffstaley	0da636e1a3	Set correct stepper direction on reset (#13032 ) On a reset steppers were being initialized to incorrect direction. Original code wasn't respecting `INVERT_Z_DIR` define.	2019-01-27 23:02:38 -06:00
Scott Lahteine	3845baf398	Followup to #12982	2019-01-27 22:53:46 -06:00
InsanityAutomation	48a3502656	Remote streamer improvements (#12982 )	2019-01-27 22:43:13 -06:00
Scott Lahteine	621fbe99de	Followup to #12817	2019-01-27 20:48:58 -06:00
Marcio Teixeira	f214118e45	Action to notify host of filament runout. (#12817 )	2019-01-27 20:18:05 -06:00
Scott Lahteine	aad770bce8	Bring default configs in sync	2019-01-26 16:44:42 -06:00
jeffstaley	3f91233f6d	M29 logic was reversed If in card-saving mode generate errors line errors for anything that's NOT "M29 ?"	2019-01-25 07:36:52 -08:00
jeffstaley	0e0cc13650	Fix M29 for Pronterface SD card upload (#13010 )	2019-01-24 21:10:59 -06:00
Jiri	24fffb8d93	Fix undefined lcd_tmpfan_speed on NO_LCD_MENUS (#13006 )	2019-01-24 16:34:40 -06:00
Scott Lahteine	8f9b246d0e	Tweak some formatting, replace tabs	2019-01-24 13:18:56 -06:00
Bo Herrmannsen	808df82b36	Support for Anycubic I3 (#12972 )	2019-01-24 12:40:49 -06:00
Scott Lahteine	ae91914260	Prevent name conflicts with mixed stepper drivers	2019-01-24 01:25:28 -06:00
Scott Lahteine	0eca236dcd	Fix L6470 config comments	2019-01-24 00:58:16 -06:00
InsanityAutomation	f4d1f13358	Warn on cold extrusion, dont error	2019-01-24 00:16:14 -06:00
Scott Lahteine	aa74a900f5	Bring Rostock 301 and ArmEd configs up to date	2019-01-23 23:37:37 -06:00
Scott Lahteine	0f07ba4f09	Tweak some comments	2019-01-23 20:18:13 -06:00
Scott Lahteine	00cdd41b5f	Clean up for recent changes	2019-01-23 20:08:58 -06:00
Roman Moravčík	7d53b79596	Update Slovak translation (#12991 )	2019-01-23 19:48:16 -06:00
Giuliano Zaro	18c32996c1	[2.0.x] Updated Italian language (#12997 )	2019-01-23 19:35:42 -06:00
Bob Kuhn	7c1a5e3c47	Fix TEMP_TIMER in pins_STEVAL.h (#12994 )	2019-01-23 19:34:39 -06:00
Scott Lahteine	b4994ad12e	Update language_it.h	2019-01-23 19:28:57 -06:00
Bob Kuhn	2f35747f29	L6470 SPI daisy chain support (#12895 )	2019-01-23 19:06:54 -06:00
Scott Lahteine	6453b82a5e	Clean up trailing whitespace	2019-01-23 15:57:01 -06:00
Scott Lahteine	48a581ba2e	Tweak some HAL Due code	2019-01-23 00:53:20 -06:00
Marcio Teixeira	54fdf57b8c	ExtUI: Fix fan wrapping around from 0 to 100 (#12987 )	2019-01-22 23:33:10 -06:00
InsanityAutomation	dbe4126e07	Update language_en.h (#12988 )	2019-01-22 23:32:01 -06:00
teemuatlut	e5801b75f8	Fix TMC-related compile issues. (#12971 ) - `STEALTHOP_[XYZE]` configuration options now set the default state.	2019-01-20 23:54:57 -06:00
Gert-Jan Rodenburg	bb30927549	Fix pins for ZONESTAR_LCD with Zonestar ZRIB (#12956 )	2019-01-20 23:52:51 -06:00
Ludy	dc65d96aca	Fix TMC compile error (#12965 )	2019-01-20 23:47:28 -06:00
InsanityAutomation	a1cf49935d	Add laser control menu (#12883 )	2019-01-20 23:41:47 -06:00
InsanityAutomation	75f2665f2e	LCD SD Card items near top when not using wheel (#12926 )	2019-01-20 23:24:53 -06:00
Scott Lahteine	e1f951813a	Remove old block end comment	2019-01-20 02:30:03 -06:00
Scott Lahteine	52108192d1	Prevent L6470 class name conflict with drivers.h define Fix #12824	2019-01-20 00:32:56 -06:00
Scott Lahteine	0495fcd475	Minor spacing fix	2019-01-20 00:10:50 -06:00
lanserge	c2cf8ffa82	Add support for Arduino DUE Shield Kit (#12950 )	2019-01-19 23:43:32 -06:00
Scott Lahteine	4e5a915ef8	Fix some Makefile comments	2019-01-19 23:41:30 -06:00
Scott Lahteine	a5911765c3	Tweak some spacing	2019-01-19 20:27:57 -06:00
chrisly42	99e5e8362f	Rapide Lite 200 config, pins_RL200 RUMBA clone (#12848 )	2019-01-19 20:19:14 -06:00
Scott Lahteine	6411680364	Update some pins spacing	2019-01-19 19:21:52 -06:00
teemuatlut	8a3f1d6932	Fix chopper timing struct and initialization (#12943 )	2019-01-19 18:57:02 -06:00
Ludy	c6991109b7	Update German language (#12953 )	2019-01-19 18:50:24 -06:00
Giuliano Zaro	ca9eb14f6a	Update Italian language (#12951 )	2019-01-19 18:48:13 -06:00
Ludy	acf266fe78	Fix a compile warning, etc. (#12955 )	2019-01-19 18:47:29 -06:00
Scott Lahteine	424aa05cc2	Fix some file endings	2019-01-19 18:19:12 -06:00
Scott Lahteine	ce563d7c2e	Various general cleanups Mostly from the L6470-oriented PR	2019-01-19 16:56:12 -06:00
Scott Lahteine	02cc63d6d4	Update CreatorPro Configuration_adv.h	2019-01-19 16:37:50 -06:00
Marcio Teixeira	f4c16e683b	Follow up fixes to #12884 (#12940 )	2019-01-17 18:48:29 -06:00
Scott Lahteine	712e23c383	Fix up some whitespace	2019-01-17 18:05:36 -06:00
Ziemowit	20c20dacb7	MKS SBASE needs DRV8825 (#12911 )	2019-01-17 13:21:53 -06:00
Giuliano Zaro	7bb5d4bfe8	Small LED code reorganization (#12929 )	2019-01-17 13:20:26 -06:00
teemuatlut	e6805582a6	M569 to change stepping mode. Add new TMC section to LCD. (#12884 )	2019-01-17 13:17:16 -06:00
Bob Kuhn	d08f27e27b	Add support for STEVAL 3DP001V1 (#12894 )	2019-01-15 18:59:36 -06:00
Alain Martel	cdb562d558	Bring Migbot config up to date (#12916 )	2019-01-15 18:53:07 -06:00
Giuliano Zaro	8f4c6e6d1a	Fix case light on boot (#12919 )	2019-01-15 18:50:56 -06:00
Marcio Teixeira	f11c6d5d02	Fix M107 when dual-nozzles share fan (#12819 ) (#12909 )	2019-01-15 18:45:18 -06:00
Karl Andersson	64a4649290	STM32 - Fix SD write (#12897 )	2019-01-15 18:44:22 -06:00
Ludy	294521439e	Clean up Configuration_adv.h (#12900 )	2019-01-15 18:42:10 -06:00
InsanityAutomation	59b18aaeef	Allow resume from pause with parking enabled (#12893 ) Currently, Pause of an SD-Memory card print does not work. This has been verified to resolve the issue by multiple people. I understand more work needs to be done to resolve some of the concerns...	2019-01-15 07:58:54 -07:00
Giuliano Zaro	85f149befe	Save some progmem (#12913 )	2019-01-14 20:56:30 -06:00
mikeshub	7fde8d9d1e	Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support (#12855 ) - Fix a bug in MAXxxxx thermocouple temp reporting. - Add support for 3-wire HD44780. - Add support for PCA9533 RGB driver. - Add configuration examples for FlashForge CreatorPro.	2019-01-14 14:29:55 -06:00
Scott Lahteine	3644c940bf	Tweak SD section of Main Menu	2019-01-13 18:00:07 -06:00
teemuatlut	1a79878dff	Remove TMC_Z_CALIBRATION in favor of Z_STEPPER_AUTO_ALIGN	2019-01-12 18:07:28 -06:00
Scott Lahteine	7cfce20cd3	Update comments on M125	2019-01-12 17:52:44 -06:00
Jason	dc4786a504	Config files for PowerWASP Printer (#12889 )	2019-01-12 16:57:45 -06:00
Scott Lahteine	3e867008f0	Fix some HAL_STM32F1 type declarations	2019-01-12 16:21:11 -06:00
Scott Lahteine	eb78aed863	Rename LCD menus according to variable types (#12892 )	2019-01-12 16:01:04 -06:00
InsanityAutomation	ed3ab5e212	Fix M24 not starting new job (#12887 )	2019-01-12 15:30:44 -06:00
Nils Hasenbanck	f9299c4461	Make timer definition in pin files for STM32 possible (#12874 ) RemRam needs to redefine a particular timer to work correctly. The HAL did foresee this possibility and checks if the timer was already defined for either the stepper or temperature timer. Prior to this commit the header file for the timers couldn't see those definitions in the pin file, but this commit will fix this. Tested on an actual hardware to verify. (It wouldn't boot without it.)	2019-01-12 14:40:49 -06:00
InsanityAutomation	082f6a27de	ADAPTIVE_FAN_SLOWING extension to hotend thermal protection (#12853 )	2019-01-12 00:41:48 -06:00
Scott Lahteine	459f4fef60	Fix Temperature::init bug with HEATER_4_PIN	2019-01-11 22:54:26 -06:00
InsanityAutomation	a403d9a50c	Improve menu pause / resume (#12876 )	2019-01-11 20:42:11 -06:00
Alain Martel	432c21456f	Add 3DFabXYZ Migbot example config (#12775 ) Co-Authored-By: Alain Martel <alain74martel@gmail.com>	2019-01-11 20:41:20 -06:00
Scott Lahteine	fb8111553e	getStatus => report_status	2019-01-11 19:51:00 -06:00
Chris Pepper	2919f3045d	[LPC176x] Update PIO extrascript (#12878 )	2019-01-11 19:45:33 -06:00
Scott Lahteine	19fea772e5	Use E_AXIS_N where it makes sense	2019-01-11 19:42:34 -06:00
Scott Lahteine	0d30ccf767	Tweaks to TMC26XStepper	2019-01-11 19:42:34 -06:00
HackingGulliver	1fd8e2c649	Fix: Junction Deviation calculates wrong cos(theta) on CoreXY (#12879 )	2019-01-11 19:25:48 -06:00
Scott Lahteine	b402040059	Split bed size sanity check into two	2019-01-11 15:49:57 -06:00
Chris Barr	1d33784bf9	Add RUMBA32 Board (#12856 )	2019-01-10 19:34:31 -06:00
Ondřej Nový	a0ef6198ff	Level bed corners Z-hop height option (#12858 )	2019-01-10 19:15:17 -06:00
Karl Andersson	8ae6f1e556	Fix errors and some compiler warnings with HAL_STM32 PlatformIO build (#12869 )	2019-01-10 19:01:31 -06:00
Scott Lahteine	e6484d9dab	Return to status when SD card is removed	2019-01-10 15:43:31 -06:00
Scott Lahteine	5f2d75f45b	Move PINS_DEBUGGING to @section develop	2019-01-08 20:05:05 -06:00
Scott Lahteine	da42f27c9e	Use maths macros for ceil/floor	2019-01-05 21:21:02 -06:00
Ludy	de4561c980	VORON Add LCD option BEEP_ON_FEEDRATE_CHANGE (#12822 )	2019-01-05 14:12:05 -06:00
Giuliano Zaro	709a6356f7	Remove obsolete test conditions (#12829 )	2019-01-05 14:02:45 -06:00
Luu Lac	bcf347403b	Fix M106 extruder & fan count (#12820 )	2019-01-05 14:01:35 -06:00
Kaushik Vemparala	ba7e35cbab	Add LCD option BEEP_ON_FEEDRATE_CHANGE (#12774 )	2019-01-04 19:30:08 -06:00
jmz52	d372e7e477	SDIO support for STM32F1 (#12782 )	2019-01-04 13:38:07 -06:00
Marcio Teixeira	6a8fb0f25f	Simplify backlash compensation code. (#12813 ) - Use `TEST(dm,axis)` to determine directions instead of doing comparisons. - Remove recomputation of `millimeters` and `delta_mm` since backlash compensation should not affect the distance over which material is extruded.	2019-01-04 13:30:56 -06:00
luxflow	7f244f9b9c	Update LPC SD pins for BIQU SKR (#12767 ) (Exactly matching the Azteeg X5 MINI Wifi)	2019-01-03 10:44:00 -06:00
jmz52	813a4ea107	Add support for Mks Robin TFT display (#12706 ) * Add support for MKS Robin TFT display - Add support for MKS Robin TFT display and encoder for MKS Robin board. - Generic 128x64 UI with x2 upscale is used (for now). - Tested on MKS Robin TFT V2.0 with ST7789V controller.	2019-01-03 10:38:39 -06:00
jmz52	c4237b529f	Fix MKS Mini and SD card conflct over SPI mode (#12783 )	2019-01-03 10:27:53 -06:00
Phr3d13	01f75591c6	Fix GTM32_PRO_VB Serial and HAL via watchdog (#12753 ) Move `watchdog_reset` from `.h` to `.cpp` to eliminate the need to include `MarlinConfig.h` in a HAL-related file.	2019-01-03 09:46:49 -06:00
Scott Lahteine	288340cb6c	Followup to VORON	2019-01-03 09:14:14 -06:00
Scott Lahteine	2aaa681dea	Remove unused Cheaptronic pins	2019-01-03 08:58:55 -06:00
Marcio Teixeira	81e753064a	Fix ExtUI compile warnings and error (#12799 )	2019-01-03 08:36:43 -06:00
Ludy	74c47803f7	Add VORON printer (#12705 )	2019-01-03 06:27:03 -06:00
kAdonis	637fb20c75	Allow 4 fan animation frames (#12772 )	2019-01-03 06:03:06 -06:00
petieken	d9cf5e4883	Update pins_BIQU_SKR_V1.1.h (#12758 )	2019-01-02 13:50:05 -06:00
TheLongAndOnly	cb643d87df	Adding missing code for triple Z-stepper auto-align (#12786 )	2019-01-01 18:22:04 -06:00
Ludy	14a7faf087	Fix compile warning comparison uint and int (#12788 )	2019-01-01 18:20:12 -06:00
Marcio Teixeira	60cb36bef3	Misc. improvements (#12747 ) * Make ExtUI respect MAXTEMP limits - Temperatures are now clamped by MAXTEMP limits rather than arbitrary values. * Speed up USB init, add status - Speed up USB initialization - Show status message if init failed * Enable status messages for EXTENSIBLE_UI * Adjust max limit to MAX_TEMP - 15 * Misc. tweaks to formatting, const, etc.	2019-01-01 15:17:48 -06:00
InsanityAutomation	4f2473053c	Fix M106 with SINGLENOZZLE	2018-12-31 20:10:18 -06:00
Reece Kibble	7557f8d68c	Rename all Stm32f1 to STM32F1 (#12639 )	2018-12-31 16:36:49 -06:00
Scott Lahteine	371d9a1acf	Fix line-endings, formatting, whitespace Followup to #12770	2018-12-30 15:38:20 -06:00
Ludy	135c74017c	Fix compile DEBUG_EEPROM_READWRITE error (#12746 )	2018-12-30 11:37:20 -06:00
Giuliano Zaro	54ba44ee37	Fix bad sanitycheck (#12748 )	2018-12-30 10:44:15 -06:00
swilkens	b01a630bd0	[2.0.x] Correct Ender 3 bed size (#12769 )	2018-12-30 10:42:47 -06:00
Alain Martel	44ed34475b	Add MKS BASE 1.4 pins (#12770 )	2018-12-30 10:40:22 -06:00
Roxy-3D	3a16cb6d7f	Slightly Slower Max X Axis speed On some T-Rex 2+ machines the previous max step rate could lose steps....	2018-12-28 09:14:48 -06:00
Ludy	814d93c7cf	Fix G33 sprintf output warning (#12738 )	2018-12-27 18:05:42 -06:00
Ludy	3877bf9704	Fix compile error with delta and sensorless homing (#12740 )	2018-12-27 17:51:22 -06:00
Ludy	cfc5e96b4b	Move JD to Config.h (and fix jerk->eeprom bug) (#12720 )	2018-12-27 15:29:39 -06:00
Roman Moravčík	594898aea7	Limit hotend / bed temperature to maxtemp-15 (#12713 )	2018-12-27 11:46:05 -06:00
InsanityAutomation	530ef5846f	Make nomove=false for toolchange on filament swap (#12739 )	2018-12-27 11:38:35 -06:00
InsanityAutomation	14ddda285c	Confirmation on Abort SD print (#12717 )	2018-12-27 11:36:39 -06:00
Msq001	f8c5d31864	Bugfix 2.0.x add motherboard pins define (#12689 ) - `pins_BIQU_B300_V1.0.h` defines pins for B300, as found in the BIQU Thunder 3D printer. - `pins_BIQU_SKR_V1.1.h` defines pins for bigtree/BIQU SKR V1.1 motherboard.	2018-12-27 10:52:35 -06:00
InsanityAutomation	b7a8dcc35d	Update Formbot T-Rex 3 pins (#12662 )	2018-12-20 17:32:39 -06:00
Ludy	f7127c44f8	Wanhao Duplicator i3 Plus pins create (#12701 )	2018-12-20 17:30:36 -06:00
jmz52	33abb86b7e	Add support for MKS Robin board (#12650 ) Implement initial support for MKS Robin (STM32F103ZET6) board. Custom build script is used to generate encrypted firmware compatible with original MSK Robin bootloader (i.e. safe firmware update from SD card and possibility to go back to original close-source firmware).	2018-12-20 17:23:27 -06:00
InsanityAutomation	367a9f65aa	Add Formbot 350c Thermistor (#12661 )	2018-12-20 17:04:17 -06:00
Ludy	33f3c75213	GTM32 Pro VB FAN-PIN correction (#12666 )	2018-12-20 16:42:15 -06:00
Scott Lahteine	9d59a9c840	Followup to #12691 (typo)	2018-12-20 16:38:32 -06:00
Ludy	3829d6ccf8	FYSETC F6 13 - E2_SERIAL_TX_PIN correction (#12667 )	2018-12-20 16:11:33 -06:00
Kadah	d35dcafa3d	Added MKS MINI 12864 support to FYSETC F6 V1.3 (#12656 )	2018-12-20 16:10:49 -06:00
Roman Moravčík	98cf546771	Limit set hotend temperature to maxtemp. (#12690 )	2018-12-20 15:56:37 -06:00
Roman Moravčík	4dad489a50	[2.0.x] Limit PID autotune target to maxtemp-15 (#12691 )	2018-12-20 15:55:30 -06:00
Marcio Teixeira	8dcc28c9ae	Squelch warning mentioned in #11061 (#12676 )	2018-12-20 15:34:24 -06:00
Ondřej Nový	4c8a6eee7b	[2.0.x] Update Czech translation (#12683 )	2018-12-20 15:28:46 -06:00
Ondřej Nový	fcaed685b2	[2.0.x] Set DEFAULT_NOMINAL_FILAMENT_DIA to 1.75 in Anet A6 config (#12664 )	2018-12-18 13:35:59 -06:00
Ondřej Nový	0572be9439	[2.0.x] Enable PIDTEMPBED in Anet A8 example config (#12655 )	2018-12-18 13:34:46 -06:00
Luc Van Daele	c6e09c2689	[2.0.x] G33 clean up (#12648 ) Remove obsolete workarounds in G33 for the now fixed zprobe_zoffset bug	2018-12-18 12:43:38 -06:00
teemuatlut	7a5e637a37	Add spreadCycle parameter sets (#12645 )	2018-12-18 12:42:14 -06:00
Marcio Teixeira	902d5b0f8b	Allow ExtUI to use LCD_SET_PROGRESS_MANUALLY (#12628 )	2018-12-12 17:21:37 -06:00
Dave Johnson	9a4a463ec4	Sanity-check LIGHTWEIGHT_UI, move comment up (#12630 )	2018-12-12 16:59:20 -06:00
teemuatlut	55144284c2	TMC connection test, spreadCycle parameters, improved debugging (#12616 )	2018-12-09 20:54:48 -06:00
Ludy	97de9d54a5	Fix broken pins file include (#12617 )	2018-12-09 19:06:03 -06:00
Ludy	a7b3a61424	Improve some config comments readability (#12615 )	2018-12-09 19:02:42 -06:00
Scott Lahteine	daf07e4200	Align classic bed icon consistently	2018-12-09 12:00:10 -06:00
MasterPIC	3bb8b3529a	Center ABL grid on bed with H parameter. (#12610 )	2018-12-09 11:24:48 -06:00
Scott Lahteine	6cf8d40f41	Fix some serial echos of pin states	2018-12-09 02:38:32 -06:00
Scott Lahteine	f6321f878a	Simpler AVR + Trinamic + Soft Serial sanity-check (#12606 )	2018-12-08 23:34:26 -06:00
Scott Lahteine	7d15854514	Add Z_MIN_PROBE_PIN to MKS SBASE pins	2018-12-08 15:31:59 -06:00
Scott Lahteine	e8bda62d2a	Followup to servo angles patch Fix #12594	2018-12-08 15:31:59 -06:00
Scott Lahteine	18fedafbc5	Refresh screen on SD Init	2018-12-08 15:31:59 -06:00
Marcio Teixeira	b22716e938	M425 Backlash Correction (#11061 )	2018-12-08 14:36:46 -06:00
Scott Lahteine	fa47ce369a	Sanity-check for negative steps, feedrate, accel	2018-12-07 19:38:15 -06:00
Scott Lahteine	ef81b5f03e	Link to font docs in ultralcd_DOGM.cpp	2018-12-07 19:10:55 -06:00
Scott Lahteine	4388015f1a	Tweak config formatting	2018-12-07 16:57:14 -06:00
Scott Lahteine	b7e38ea249	Signal an invalid mesh for M420 enable / load	2018-12-07 16:14:11 -06:00
teemuatlut	50b2fbd031	Trinamic: Split stealthChop, improve driver monitoring, etc. (#12582 )	2018-12-07 15:34:21 -06:00
Scott Lahteine	9fbd73d931	Fix up some delta settings	2018-12-05 18:57:47 -06:00
Dave Johnson	0947b92734	Build and CI fixes and optimizations (#12584 ) -Disable LDF "deep+" mode on AT90USB platforms. Appears not needed any longer (likely due to fix `7322df26ad`). Results in identical binary output and cuts compile time in half -Disable Cartesio config from CircleCI (compile failure) -Disable Geetech I3 Pro X GT2560 from CircleCI (compile failure) -Enable EEPROM on Micromake example config (fix compile failure) -Move FolgerTech/i3-2020 to AVR platform in CircleCI (fix CirculeCI build failure) -Disable various examples failing to build in CircleCI -Enable various examples no longer failing to build in CircleCI	2018-12-05 17:21:40 -06:00
mr-miky	11c7945365	Don't include STM32 Core code when compiling STM32 Generic (#12575 )	2018-12-03 06:55:49 -06:00
Scott Lahteine	64389acdf1	Print a space after scrolling status	2018-12-03 06:17:09 -06:00
Scott Lahteine	7a361ad36a	Alternative fan image option (#12579 ) * Alternative fan bitmap * Move bed over by 3px	2018-12-03 05:55:33 -06:00
Scott Lahteine	261c6f4b96	Fix pause/resume SD print Followup to #12551, addressing #12566	2018-11-30 19:23:08 -06:00
Scott Lahteine	2224a4d61a	Remove AVR-only MARLIN_DEV_MODE code	2018-11-30 17:54:24 -06:00
Scott Lahteine	e874f9664c	Tweaks to endstops code	2018-11-30 14:25:55 -06:00
Scott Lahteine	3c58b16c9f	Move stepper enable/disable to stepper_indirection.h (#12562 )	2018-11-30 12:48:46 -06:00
Scott Lahteine	aaf862aef2	Fix angles for disabled EDITABLE_SERVO_ANGLES (#12559 )	2018-11-30 12:31:42 -06:00
Scott Lahteine	c986239837	A single SERIAL_ECHO macro type (#12557 )	2018-11-29 16:58:58 -06:00
Scott Lahteine	69d869c3d9	Tweak FR icon. Update font data.	2018-11-29 12:59:30 -06:00
Scott Lahteine	0c1cd9f590	Fix "No SD Card" indicator	2018-11-29 12:35:31 -06:00
Jacob Jordan	8be91677df	Fix Skew factors (#12555 ) - Ensure Skew factors are calculated from test square measurements	2018-11-29 11:39:31 -06:00
Scott Lahteine	03ef2d6c82	Fix "paused" message and M125 called by M25 (#12551 )	2018-11-28 19:28:31 -06:00
Scott Lahteine	95d154a91f	Fans loop macro	2018-11-28 16:45:08 -06:00
Scott Lahteine	61db0b65b6	Followup to heating progress	2018-11-28 14:47:43 -06:00
Scott Lahteine	4f9ec9ab45	Add heating progress bars (#12543 )	2018-11-27 21:15:52 -06:00
Scott Lahteine	929a513a6b	Add poll_runout_states, which returns 1 for runouts (#12547 )	2018-11-27 20:13:24 -06:00
Scott Lahteine	01b5c810d5	Space out multiple edit lines a bit	2018-11-27 18:10:19 -06:00
Scott Lahteine	cd88ea2106	Fix runout debug output Followup to #12544	2018-11-27 18:10:19 -06:00
Scott Lahteine	cecc238f68	Save recovery info on SD pause	2018-11-27 14:42:19 -06:00
Marcio Teixeira	439a3e8463	Improve runout sensor, fix LIGHTWEIGHT_UI screen size (#12544 )	2018-11-27 13:45:25 -06:00
Scott Lahteine	5b24ce9024	Hide M217 compile warning	2018-11-26 16:52:16 -06:00
David Bates	d94b50a3d8	Add sample config for Delta with MKS SBASE (#10819 )	2018-11-25 21:23:02 -06:00
InsanityAutomation	dec721c52b	Add Formbot Raptor2 and Raise3D pins (#12532 ) * Add Formbot Raptor2 board * Add Raise3D Rumba board	2018-11-25 19:56:06 -06:00
Scott Lahteine	6aae199572	Add missing boards to Makefile	2018-11-25 19:11:09 -06:00
Scott Lahteine	0a638cc022	Adjust Formbot Raptor pins	2018-11-25 18:35:45 -06:00
Ludy	e5019a0481	Fix English special symbols (#12529 )	2018-11-25 18:19:12 -06:00
Scott Lahteine	09d6db491a	Fix wait_for_bed compile error	2018-11-25 18:05:41 -06:00
Roman Moravčík	d545f984b0	Update Slovak translation (#12523 )	2018-11-25 17:44:51 -06:00
Ludy	730f223100	Correct FANMUX2_PIN (#12538 )	2018-11-25 17:27:41 -06:00
Yücel Temel	d857cdfb27	Update Turkish language (#12524 )	2018-11-25 17:26:26 -06:00
Scott Lahteine	4a7c6f7241	NUM_ARRAY => COUNT	2018-11-24 00:27:45 -06:00
Giuliano Zaro	31113c5adf	Update Italian language (#12512 )	2018-11-24 00:26:54 -06:00
Scott Lahteine	b57343c255	Put status screen options in Configuration_adv.h	2018-11-23 23:15:07 -06:00
Scott Lahteine	1fcc13b011	Allow Serial Overrun Protection to be disabled	2018-11-23 21:07:38 -06:00
Scott Lahteine	29c53f2402	Hide some compile warnings	2018-11-23 21:07:38 -06:00
Scott Lahteine	caca3c8503	Use wait_for_bed with WAIT_FOR_BED_HEATER Addressing #12517	2018-11-23 20:39:23 -06:00
Scott Lahteine	f1efcfed14	Fix backslash in language_test.h	2018-11-23 20:39:23 -06:00
Yücel Temel	3b186a55ac	Don't show superscript ³ with NOT_EXTENDED_ISO10646_1_5X7 (#12513 )	2018-11-23 20:16:51 -06:00
Scott Lahteine	82c96c971e	Bring superscripts slightly lower in BDF fonts	2018-11-23 20:02:34 -06:00
Sinisa Culic	8a0992d921	Fast PWM for controller fan (#12485 )	2018-11-23 16:03:39 -06:00
Ludy	e98d195901	Remove extra declarations in cardreader.cpp (#12520 )	2018-11-23 15:58:20 -06:00
Scott Lahteine	fd2998efd5	Revert ADC_KEYPAD direction behavior (#12508 )	2018-11-22 06:00:00 -06:00
Scott Lahteine	d29cb09b3e	Fix a minor compile warning	2018-11-22 05:35:38 -06:00
Yücel Temel	5b1d52671c	Use superscript 3 in language_en.h (#12504 )	2018-11-22 02:27:28 -06:00
Marcio Teixeira	7109dadd21	Additional pin definitions for Archim 2 (#12500 ) - Added GPIO pins to Archim 2 - Added new 108 pin to `fastio_Due.h`	2018-11-22 01:07:02 -06:00
Andy Shaw	4975b13b74	Fix problems with LPC1768 EEPROM flash emulation (#12503 ) * Remove duplicate calls to PrepareSector Some flash memory API calls require that a call to `PrepareSector` is done before use. However this call is already made by the LPC1768 framework so the calls in this code are not required. * Ensure correct alignment of RAM buffer The LPC176X flash API requires that the RAM buffer used for write operations must be word-aligned. This change ensures that this is the case.	2018-11-22 01:03:32 -06:00
Scott Lahteine	b738972e69	General cleanup of Re-ARM pins	2018-11-21 19:00:49 -06:00
Scott Lahteine	ee423dcdd0	Invert hotend bitmaps, by default	2018-11-21 01:02:06 -06:00
Scott Lahteine	c5642a894f	Fix ADC_KEYPAD middle button (#12493 )	2018-11-20 21:39:30 -06:00
Scott Lahteine	0946cbcdca	Revert some const changes (for now)	2018-11-20 08:19:48 -06:00
Scott Lahteine	4def8b3b5e	Expanded options for _Statusscreen.h (#12455 ) See the PR for full details. The updated system will be documented on the website in the near future.	2018-11-20 07:50:37 -06:00
Scott Lahteine	d51e5690f4	Don't show updir with no card present	2018-11-20 07:01:46 -06:00
Scott Lahteine	ec9d21a234	Shift YZ on graphical display to fit Z+123.45	2018-11-20 06:58:18 -06:00
Scott Lahteine	817a37169a	Apply/unapply const here and there	2018-11-20 06:44:21 -06:00
Scott Lahteine	643e0066a0	Followup to #12451	2018-11-20 06:27:19 -06:00
Marcio Teixeira	4bcb63b705	Fix for #12482 (#12483 ) Fix Z-move to uninitialized position in SWITCHING_EXTRUDERS tool_change (no_move=true)	2018-11-20 00:04:11 -06:00
Marcio Teixeira	50ee747787	Fix compilation errors. Followup to #12439 (#12481 )	2018-11-20 00:02:13 -06:00
Ludy	90a58488b5	Corrected unused var, default switch, Travis tests (#12477 )	2018-11-19 23:59:48 -06:00
Scott Lahteine	a4c15dc54f	Modify MBL to use IJ instead of XY (#12478 )	2018-11-19 09:08:15 -06:00
Scott Lahteine	fc3f1c4572	Get u8g reference for lcdprint	2018-11-19 06:23:15 -06:00
Scott Lahteine	88c57eaf55	Clean up some u8g code (#12476 )	2018-11-19 01:33:59 -06:00
Ludy	1f93d2bcf7	Fix LCD compile error, etc. (#12472 )	2018-11-18 20:39:49 -06:00
Scott Lahteine	826d570162	Combine Travis CI option-setting commands (#12474 )	2018-11-18 19:58:02 -06:00
Scott Lahteine	9d13f07d09	GTM32 Pro VB changes from Markku Sinisalo	2018-11-18 19:56:38 -06:00
Roman Moravčík	5fbe5cabc8	Fixed displaying of kill MSG_OUTAGE_RECOVERY string. (#12470 )	2018-11-18 18:05:29 -06:00
kAdonis	4ae9a06c60	Update M303.cpp (#12471 )	2018-11-18 18:04:51 -06:00
Ludy	c0b75f49b6	Fix "no effect" and "unused variable" compile warnings (#12473 )	2018-11-18 17:54:00 -06:00
Nils Hasenbanck	5a4fd8e0a6	Fix access to the DWT peripheral for STM32 HAL (#12434 ) Access to the DWT peripheral for the `CYCCNT` register needs to happen before `main()`. The code needs to be called after the setup of the system clocks, so the right place is between the `premain()` and `main()` function of the STM32 Arduino core. This patch moves the DWT access code to a new function, which is then placed between `premain()` and `main()`.	2018-11-18 01:30:46 -06:00
Scott Lahteine	7f225b9421	Fix MAX_MESSAGE_LENGTH	2018-11-18 01:11:26 -06:00
Scott Lahteine	06674a321a	Remove extra include	2018-11-18 00:34:07 -06:00
Marcio Teixeira	c1e17037e5	Various fixes for MarlinUI and ExtUI (#12439 )	2018-11-17 22:21:44 -06:00
Giuliano Zaro	d3605cfc26	Don't start watching heaters when target is 0 (#12453 )	2018-11-17 21:53:52 -06:00
Ludy	93e958f695	Fix compile error with ZONESTAR_LCD+NO_LCD_MENUS (#12466 )	2018-11-17 21:21:30 -06:00
Ludy	22d7fed60a	Fix compile error with SD_FIRMWARE_UPDATE (#12462 )	2018-11-17 21:13:36 -06:00
Nils Hasenbanck	779b2709ec	Change temperature pin order for RemRam V1 (#12458 ) Beta testers suggested to adopt the RAMPS order of temperature probe connectors. This commit fixes the order to the RAMPS order.	2018-11-17 16:51:06 -06:00
Scott Lahteine	8ebb4dc294	Followup to static CardReader	2018-11-17 07:52:35 -06:00
Scott Lahteine	7ee5894360	Allow float XY probe offsets Responding to #12383 XY probe offsets should be integers because adding decimal points makes the code larger. But if decimals are very much wanted, this commit removes the old restriction.	2018-11-17 07:44:47 -06:00
Giuliano Zaro	43ecdb606f	Fix a compile warning (#12452 )	2018-11-17 07:08:25 -06:00
Ph0non	984c4ba8c7	Enable SD Card on RepRap Display and RADDS (#12446 ) * Enable SD Card on RepRap Display and RADDS Define the necessary pins in `pins_RADDS.h` (copied from the `RADDS_DISPLAY` section) for the use of the SD card slot on RRD.	2018-11-17 06:59:40 -06:00
Ludy	56a94c2a26	Use 'target_extruder' in M104 as with M109 (#12448 )	2018-11-17 06:55:25 -06:00
Scott Lahteine	66580f32c2	Make CardReader class static (#12451 ) * Make CardReader a static class * Make CardReader flags into bitfields	2018-11-16 22:39:16 -06:00
Scott Lahteine	3e9ffaddb6	Consolidate, optimize some LCD menu code (#12450 )	2018-11-16 21:44:48 -06:00
Scott Lahteine	d97e31db4c	Optimize Power-Loss Recovery (#12440 )	2018-11-16 20:47:07 -06:00
Mateusz Krawczuk	ca21ac6b9b	Support two MAX6675 thermocouples (#8686 )	2018-11-16 18:20:33 -06:00
Scott Lahteine	0e610815e4	No need for Cap:PAREN_COMMENTS	2018-11-16 04:28:40 -06:00
Scott Lahteine	7a075a5dc9	Tweak extruder errors	2018-11-16 01:32:21 -06:00
Scott Lahteine	2d92f333f5	Fix GcodeSuite::T active_extruder reference	2018-11-15 14:07:24 -06:00
Scott Lahteine	d2bb53702a	Optimize target_extruder, ignore T with mixing (#12432 ) * Optimize target_extruder, ignore T with mixing * Give G-code Tn parity with tool_change	2018-11-14 17:33:04 -06:00
Marcio Teixeira	5e586a6b39	Fix to runout sensor code. (#12431 ) - "old_state" is no longer a class static variable.	2018-11-14 16:54:05 -06:00
Scott Lahteine	d82c350de7	Miscellaneous LCD code renaming, reordering (#12430 ) * Move special characters to language.h * Apply some naming standards * Clean up menu item draw functions * Rename some Temperature methods * UI => ExtUI	2018-11-14 13:13:51 -06:00
Scott Lahteine	edfd106bc5	Rejigger Filament Runout class (#12428 )	2018-11-14 11:45:57 -06:00
Scott Lahteine	f4c128ecaa	Move RRW keypad code to a common method (#12429 )	2018-11-14 06:00:21 -06:00
Scott Lahteine	54ec5528a0	hasstatus => has_status	2018-11-14 01:34:28 -06:00
Scott Lahteine	ebf585b673	Fix an old sanity check	2018-11-14 01:15:35 -06:00
Ryan	052d102ded	UltiMachine Archim 1 support (#12404 )	2018-11-14 00:27:39 -06:00
Scott Lahteine	664e20754d	Clean up pins files	2018-11-14 00:23:33 -06:00
Scott Lahteine	1eb5249598	Fix Formbot Trex-2+ configs Followup to #12422	2018-11-13 21:53:54 -06:00
thiagodesacosta	075a22ed65	Update Portuguese-Brazilian translation (#12402 )	2018-11-13 19:42:25 -06:00
Marcio Teixeira	3ceab8474c	Add required "cardreader.h" include (#12419 )	2018-11-13 17:12:44 -06:00
Giuliano Zaro	98c2fc4e42	Endstops fix followup (#12423 ) Followup to #12413	2018-11-13 17:10:07 -06:00
Roxy-3D	f19fd642ce	Updates to Formbot T-Rex 2+ configuration files (#12422 ) Updates to Formbot T-Rex 2+ configuration files	2018-11-13 13:48:35 -06:00
Roxy-3D	cda5ef08fa	Debug of G2-G3 for UBL (#12386 ) Changes only affect UBL. Everything else is left alone.	2018-11-13 11:20:21 -06:00
AnHardt	9ad3aed0ef	Fix tool-change for MIXING_EXTRUDER with < 2 virtual tools (#12417 ) Fix #12416 Better handling of `ENABLED(MIXING_EXTRUDER) && !MIXING_VIRTUAL_TOOLS > 1` - to not fall through to the general case. Fix compiler warnings for `#elif EXTRUDERS < 2`.	2018-11-13 04:56:10 -06:00
Giuliano Zaro	d631267548	Refine endstops fixes (#12413 ) When endstops/probe are enabled `ENDSTOP_NOISE_THRESHOLD` calls to `update` are required to properly re-sync endstops/probe status.	2018-11-13 04:31:58 -06:00
Scott Lahteine	0ee1a92971	Group status methods, share reset_status with Extensible UI (#12414 ) * Group status methods, share reset_status with Extensible UI * Move common DOGM code to headers	2018-11-13 01:47:45 -06:00
Scott Lahteine	690c4e8457	Clean TLM trailing whitespace	2018-11-13 00:03:34 -06:00
Scott Lahteine	143b2896e0	Add M412 to enable/disable filament runout detection (#12406 )	2018-11-12 21:29:46 -06:00
Scott Lahteine	a163c89c6a	Followup to `50af1d1`	2018-11-12 20:31:53 -06:00
AnHardt	be6271767f	Fix BABYSTEP_ZPROBE_OFFSET (#12408 ) Fix #12399 Did not compile without `WATCH_HOTENDS \|\| WATCH_THE_BED`. Add condition to include "../../module/temperature.h".	2018-11-12 17:44:21 -06:00
Scott Lahteine	50af1d1e08	Differentiate translated On/Off from Serial ON/OFF	2018-11-12 17:23:08 -06:00
Scott Lahteine	df907a905f	Update UBL comments for debug change	2018-11-12 03:46:48 -06:00
Scott Lahteine	da17f8ad37	For now (!) don't synchronize in M204 and M205 See if this has any deleterious effect on motion planning by slicers that inser their own jerk and acceleration controls. The problem I see is that these settings can take effect on blocks already in the planner, and the only way around this would be to shadow these settings in planner blocks and use the shadowed settings in the planner.	2018-11-12 02:43:24 -06:00
Scott Lahteine	a3923424c7	Clean up LCD width/height determination	2018-11-12 02:37:40 -06:00
Scott Lahteine	a0c795b097	Encapsulate common display code in a singleton (#12395 ) * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.	2018-11-11 12:16:24 -06:00
Scott Lahteine	9da6809ac3	Adjust some comment spacing	2018-11-11 11:28:50 -06:00
Scott Lahteine	471f403a67	Reduce code size with plain inlines	2018-11-11 08:36:10 -06:00
Scott Lahteine	30a49f5ee2	Apply extra condition to LCD_PROGRESS_BAR	2018-11-11 08:36:10 -06:00
Scott Lahteine	4e0c935959	Update HAL and libs formatting	2018-11-10 19:43:23 -06:00
Scott Lahteine	47483e8c17	Update Raptor config	2018-11-10 19:42:46 -06:00
Scott Lahteine	6093df11dc	Allow G26 to use the active extruder (#12387 ) * Make lcd_quick_feedback argument optional * Add click_to_cancel option to wait_for_hotend/bed * Have G26 use the active nozzle and wait_for_hotend/bed * Use wait_for_release in UBL G29 * Add 'T' parameter to G26 for an initial tool-change	2018-11-10 18:07:38 -06:00
articide	4260282df7	Tevo Little Monster example configuration (#12370 )	2018-11-10 03:36:01 -06:00
Scott Lahteine	bed15fcd81	Tweak 'echo_not_entered' used by MBL's G29	2018-11-10 01:32:51 -06:00
Scott Lahteine	c239131ff5	Use 'serial_spaces' in 'print_2d_array'	2018-11-10 01:32:51 -06:00
Scott Lahteine	56150ec030	Add reference comments to MeshLevelingState	2018-11-09 21:31:20 -06:00
Ludy	24c5e57bb6	Update German language (#12379 )	2018-11-09 15:25:29 -06:00
Giuliano Zaro	fd7fd55662	Solve endstops issues (#12382 ) - Partially reverts #11900 and tries to solve #12336	2018-11-09 14:58:04 -06:00
Scott Lahteine	78ccedd6a8	Fix M91x sanity-check to permit TMC2660 Fix #12362	2018-11-09 05:48:15 -06:00
revilor	b60abc7c37	[2.0.x] Macro G-codes (#9365 )	2018-11-09 05:25:08 -06:00
Giuliano Zaro	ccdbf20f60	Update Italian language (#12368 )	2018-11-09 04:04:02 -06:00
Roman Moravčík	d08847b1a6	Update Slovak translation (#12376 )	2018-11-09 04:03:07 -06:00
InsanityAutomation	7665dff58b	No error on T0 with single-extruder and fix MIXING_EXTRUDER virtual tools (#12375 )	2018-11-09 00:15:07 -06:00
Scott Lahteine	4ed6397e5d	More comprehensive NO_LCD_MENUS (#12367 )	2018-11-09 00:07:16 -06:00
Scott Lahteine	9c8f083d6c	Extend pins errors to include the processor	2018-11-08 22:25:59 -06:00
Scott Lahteine	525ea554a1	Remove obsolete comments	2018-11-08 10:55:18 -06:00
Scott Lahteine	ef724edd80	Apply HAS_LCD_MENU in EEPROM code	2018-11-08 10:03:05 -06:00
Scott Lahteine	b169320a03	Clean trailing whitespace	2018-11-07 02:40:18 -06:00
Scott Lahteine	81b1e9d272	Fix up xdiff, ydiff, zdiff in tool change Followup to #12137	2018-11-06 22:56:33 -06:00
InsanityAutomation	6471a75a22	Combine more tool-change variables (#12137 )	2018-11-06 22:22:20 -06:00
Scott Lahteine	147e270208	Restore GTM32_PRO_VB temp and heater pins Undo #12345	2018-11-06 21:41:30 -06:00
Scott Lahteine	8def25e475	Set CUSTOM_MACHINE_NAME for some configs	2018-11-06 21:41:30 -06:00
Scott Lahteine	812f6a7dd7	Fix Resume from SD Pause In reference to https://github.com/MarlinFirmware/Marlin/pull/12098#issuecomment-436231690	2018-11-06 21:09:37 -06:00
Scott Lahteine	4f72e041f2	Use card.stopSDPrint() for completeness	2018-11-06 20:55:17 -06:00
Scott Lahteine	488a17b3f5	Use IS_SD_PRINTING() more	2018-11-06 20:55:17 -06:00
Marcio Teixeira	4dbaa6369f	Fix const pointer assignment compile error (#12350 )	2018-11-06 19:49:39 -06:00
Giuliano Zaro	959ed32636	Update Italian language (#12352 )	2018-11-06 19:30:24 -06:00
Roman Moravčík	812bfec65e	Update Slovak translation (#12354 )	2018-11-06 19:29:28 -06:00
Ludy	1624722566	Update German translation (#12355 )	2018-11-06 19:28:40 -06:00
Scott Lahteine	e574f01568	More advanced pause tweaks (#12356 ) * Followup to LCD_TIMEOUT_TO_STATUS=0 * Make continuous purge screen fit 20x4 * Unify purge message modes * Preserve last-set pause header mode	2018-11-06 19:25:57 -06:00
Scott Lahteine	5a470d4a49	Apply some tool-change cleanup	2018-11-06 18:20:01 -06:00
Roman Moravčík	34ea458667	Fixed advanced pause messages (#12353 )	2018-11-06 15:27:19 -06:00
Scott Lahteine	4c5ca89d8c	Show the appropriate pause message (#12348 )	2018-11-06 04:13:48 -06:00
Marcio Teixeira	8517d5f915	LCD menu code refactoring and cleanup (#12308 )	2018-11-05 22:51:10 -06:00
Scott Lahteine	b3b4e6dc45	Change Marlin debug flag names to fix conflicts (#12340 ) In reference to #11000	2018-11-05 22:48:28 -06:00
Giuliano Zaro	f7e682eeee	Update Italian language (#12344 )	2018-11-05 22:46:59 -06:00
Phr3d13	a813900fce	Add Geeetech Rostock 301 config, update GTM32 Pro VB pins (#12345 )	2018-11-05 22:42:06 -06:00
Scott Lahteine	04f173790f	Remove trailing whitespace	2018-11-05 22:38:20 -06:00
Scott Lahteine	c536ee1122	Clean up bq Zum Mega 3D pins	2018-11-05 22:38:20 -06:00
Scott Lahteine	c31e1735dd	Restore LPC1768_PIN_INTERRUPT_M, apply to Z3 - In reference to #12166	2018-11-05 06:28:49 -06:00
Scott Lahteine	93d5b945dd	Hide mesh editing until a valid mesh exists	2018-11-05 05:13:34 -06:00
Ludy	f34f09c821	Update German language (#12336 )	2018-11-05 04:33:31 -06:00
Roman Moravčík	eefd7676a3	Updated slovak translation (#12338 )	2018-11-05 04:31:12 -06:00
Scott Lahteine	486f2a66a9	Fix MBL XY parameter error messages Fix #11522	2018-11-05 04:17:37 -06:00
Scott Lahteine	2613ddf61c	Fix "circle"	2018-11-05 04:17:37 -06:00
Scott Lahteine	b779b42ffd	Prevent current step-down going negative Addressing #11348	2018-11-05 04:17:37 -06:00
Scott Lahteine	427bc64ba1	G28 O respects HOME_AFTER_DEACTIVATE Addressing #11271	2018-11-05 04:17:37 -06:00
Scott Lahteine	3866aeac52	Clean up ENCODER_RATE_MULTIPLIER config	2018-11-05 04:17:37 -06:00
Scott Lahteine	498dfa291e	Update and fix CHDK	2018-11-05 04:17:37 -06:00
Scott Lahteine	fed84f2961	Use multiplier edit item for mesh point editing	2018-11-05 04:17:37 -06:00
Scott Lahteine	d5ab4cd22a	Provide a default for Z_PROBE_LOW_POINT	2018-11-05 04:17:37 -06:00
Scott Lahteine	3cbc3ecdd7	Fix 'M43 T' to use 'L' as last pin - The documentation is correct. The code was wrong.	2018-11-05 04:17:37 -06:00
Scott Lahteine	1769249876	Recommend keeping endstops off	2018-11-05 04:17:37 -06:00
Scott Lahteine	5182eaf661	Fix endstops enable behavior during probing Fix a bug introduced in #9582	2018-11-05 04:17:37 -06:00
Scott Lahteine	07a0822ebe	M420 support in MARLIN_DEV_MODE	2018-11-04 20:54:38 -06:00
Scott Lahteine	63be48ada6	Add MESH_EDIT_MENU to example configs	2018-11-04 19:07:47 -06:00
KangDroid	82ff7c6542	Add a mesh edit menu for MBL / ABL-Bilinear	2018-11-04 19:07:47 -06:00
Scott Lahteine	44fa7fb18c	Cleanups for leveling-related code	2018-11-04 19:07:47 -06:00
Scott Lahteine	cc2bc67440	ENABLED(NEWPANEL) => HAS_LCD_MENU	2018-11-04 19:06:10 -06:00
Scott Lahteine	fc84878cba	MSG_UBL_EDIT_MESH_MENU => MSG_EDIT_MESH	2018-11-04 19:06:10 -06:00
Scott Lahteine	cd066bfeba	Extend error messages for E factors sanity-checks	2018-11-04 18:42:56 -06:00
Ludy	c10edb0998	Update, correct sanity-checks for up to 6 extruders (#12333 )	2018-11-04 18:36:45 -06:00
Scott Lahteine	0c85869c26	Clean up file endings	2018-11-04 18:30:10 -06:00
Scott Lahteine	b99f0776d6	Clean up some U8G files	2018-11-04 18:30:10 -06:00
Scott Lahteine	8014e1cc9d	Allow disable of LCD_TIMEOUT_TO_STATUS (when 0)	2018-11-04 18:30:10 -06:00
Giuliano Zaro	bd05816fd8	Update Italian language (#12327 )	2018-11-04 16:43:02 -06:00
Scott Lahteine	3c21483c88	Provide DOGLCD SPI pins for MKS SBASE + VIKI	2018-11-04 16:20:22 -06:00
Scott Lahteine	e0956bb572	Drop 'register' storage specifier	2018-11-04 16:17:13 -06:00
Scott Lahteine	c04cf127f7	Fix EEPROM servo angles init, section grouping	2018-11-04 16:14:54 -06:00
Scott Lahteine	9c0e05552e	Suppress some compile warnings	2018-11-04 15:25:31 -06:00
Karl Andersson	176654791e	Use board-specific or platform SPI pins in HAL_STM32 (#12323 )	2018-11-04 15:03:45 -06:00
Scott Lahteine	60dbd8161c	Fix VMAX editing Fix #12326	2018-11-04 07:06:14 -06:00
Scott Lahteine	b7ca93ba37	Remove dead comment	2018-11-04 06:10:35 -06:00
Scott Lahteine	608be966d7	Add servos to pins_FYSTEC_F6_13.h	2018-11-04 06:10:35 -06:00
Hannes Brandstätter-Müller	67b22760d9	Return to status to show manual deploy/stow messages (#12324 )	2018-11-04 04:51:26 -06:00
tharts	f5e8e8b53d	Fix broken LPC176x build (#12317 ) * Fix broken LPC176x build * Add UBL+HD44780 test for LPC1768	2018-11-04 04:25:03 -06:00
Scott Lahteine	f5eab912ed	Apply #pragma once, misc cleanup (#12322 ) * Apply #pragma once in headers * Adjust some thermistors formatting * Misc cleanup and formatting	2018-11-04 02:25:55 -06:00
Scott Lahteine	8696f882a9	Merge pull request #12313 from thinkyhead/bf2_scara_home_offset Revive SCARA home offset (not fully implemented)	2018-11-03 07:05:24 -05:00
Scott Lahteine	56d2dcb184	Use first_page flag in place of page.page == 0	2018-11-03 06:59:21 -05:00
Scott Lahteine	d1ff22b983	Revive SCARA's home offset (unimplemented)	2018-11-03 06:24:41 -05:00
Scott Lahteine	2c9586be0c	Clear up HAS_WORKSPACE_OFFSET meaning	2018-11-03 04:06:37 -05:00
Scott Lahteine	6e3caf23b6	IS_DELTA => ENABLED(DELTA)	2018-11-03 03:57:11 -05:00
Scott Lahteine	19f49db96f	Tweak / reduce menu items	2018-11-03 01:18:59 -05:00
Scott Lahteine	e4cf175163	Synchronize on M204, M205 (#12302 ) * Add parser.seen for multiple parameters * Fix M666, use !seen for report * Synchronize on M204, M205	2018-11-03 01:16:37 -05:00
Ludy	5ba6607181	Fix keypad-related compile error (#12306 )	2018-11-02 22:29:32 -05:00
Scott Lahteine	2fb2e286ee	Followup to #12256	2018-11-02 01:32:24 -05:00
Scott Lahteine	3eb9838dca	Simplify TMC sanity-checks	2018-11-02 01:15:49 -05:00
Scott Lahteine	f5b31e218d	Followup to #12082	2018-11-02 01:15:27 -05:00
Scott Lahteine	31c28d0dd2	Drop pgm_read__near and let headers choose (#12301 ) - Drop `pgm_read__near` and let headers choose. - Define `USE_EXECUTE_COMMANDS_IMMEDIATE` as a conditional. - Add `process_subcommands_now` for SRAM-based commands.	2018-11-02 00:42:16 -05:00
Scott Lahteine	fce150f094	inline static => static inline	2018-11-01 23:15:17 -05:00
Giuliano Zaro	323c088356	Restore LED light color after pid tuning (#12082 )	2018-11-01 22:04:19 -05:00
Ludy	9f77df2590	Followup to menu refactor. TMC warnings, sanity. (#12288 ) - Followup fixes for menu refactor - Fix TMC sanity checks, unused var warnings	2018-11-01 16:13:33 -05:00
Nils Hasenbanck	cafabf2055	Implement DELAY_NS with CYCCNT on Cortex-M7 (#12283 )	2018-11-01 16:11:51 -05:00
Scott Lahteine	f5498168ae	Ensure PENDING/ELAPSED use a 32-bit integer	2018-11-01 16:08:23 -05:00
MasterPIC	6e041b9c61	Use blink to show more info on LCD (#12256 )	2018-11-01 15:56:12 -05:00
Scott Lahteine	eb5600acd2	Add parentheses to LCD_CLICKED	2018-11-01 15:06:14 -05:00
Scott Lahteine	42f8b6c530	Make M125 work with SDSUPPORT (#12289 )	2018-11-01 15:03:45 -05:00
Scott Lahteine	f319087372	Followup to #12293	2018-11-01 14:41:03 -05:00
AnHardt	74bbb13008	Fix Mixer calculations for 32-bit processors (#12293 )	2018-11-01 14:38:45 -05:00
Scott Lahteine	549d11225a	Add to description of Z_STEPPER_AUTO_ALIGN In response to #12272	2018-10-31 18:07:20 -05:00
Scott Lahteine	2cff0d1f39	Move menu_level_bed_corners to its own file	2018-10-31 17:44:42 -05:00
Scott Lahteine	44f2a82a56	Move axis_homed, axis_known_position to motion.*	2018-10-31 17:44:42 -05:00
Scott Lahteine	946cf8b453	EEPROM read code grouping	2018-10-31 16:43:46 -05:00
Ludy	f2adb4b9cc	Update German language (#12280 )	2018-10-31 16:40:41 -05:00
Karl Andersson	484ca68228	Fix misplaced parentheses (#12284 )	2018-10-31 15:34:37 -05:00
Scott Lahteine	1d366db764	Tweaks to CR-10S configuration	2018-10-30 23:36:32 -05:00
Scott Lahteine	b5d7f69b51	Followup to #12249	2018-10-30 22:51:45 -05:00
N95JPL	b780b69c62	Use font ascent and descent for line positioning (#12224 )	2018-10-30 22:39:44 -05:00
Scott Lahteine	9cd3529108	Organize language data, fix Korean and Danish	2018-10-30 20:41:16 -05:00
Chris Pepper	66d44c72c3	Add fast binary file transfer to SD card option (#12249 )	2018-10-30 19:44:12 -05:00
Marcio Teixeira	72d8adfd1e	Cleanup and refactor EXTENSIBLE_UI (#12227 ) - Add `axis_t`, `extruder_t`, `heater_t`, and `fan_t` to eliminate ambiguity, improve type safety. - Regularized getter/setter argument order and naming. - `setAxisPosition` no longer stacks moves in the buffer, allowing it to be called repeatedly on each touch ui tap. - Implement better manual moves for `EXTENSIBLE_UI` (#12205) - Calling `setAxisPosition_mm` no longer buffers the entire move to the new position, but instead causes small moves towards it to be made during the idle loop. This allows the user to adjust the destination even after the move has started and makes the UI feel much more responsive. - As suggested by @ejtagle, the new code keeps the planner buffer full to ensure smooth motion without stops and starts. - Change `En`, `Hn` and `FANn` to zero-based indices. - Labels consistent with the rest of Marlin code.	2018-10-30 19:42:26 -05:00
Karl Andersson	1946f729fd	STM32 FastIO using register access (#12276 )	2018-10-30 19:25:44 -05:00
Scott Lahteine	56057bcecd	Fix lcd_impl_status_screen_1	2018-10-30 19:24:16 -05:00
Scott Lahteine	4ed579cafc	Americanized English spelling	2018-10-30 18:55:38 -05:00
Scott Lahteine	9e663a624b	Apply #pragma once to configuration files	2018-10-30 18:35:12 -05:00
Scott Lahteine	98c32d8df1	Fix a config endif label	2018-10-30 18:28:16 -05:00
Scott Lahteine	3583e2b449	Followup to Menu Refactor (#12275 )	2018-10-30 16:34:45 -05:00
TheLongAndOnly	5536228359	G34 Auto-align multi-stepper Z axis (#11302 )	2018-10-29 14:01:36 -05:00
Scott Lahteine	f9b80e7217	Make getfilename_sorted standard for listings	2018-10-29 13:54:21 -05:00
Scott Lahteine	5ead026967	Fix menu_temp_xx_filament_change menu items	2018-10-28 20:43:33 -05:00
Scott Lahteine	d632e44c8c	[Merge] Refactor LCD menus / screens (#12199 )	2018-10-28 18:18:22 -05:00
Ludy	1f9806875c	Update German language (#12261 )	2018-10-28 18:11:55 -05:00
mholeys	63ce8baa55	Fix Teensy 3.5/3.6 ADC access for ADC1 (#12258 )	2018-10-28 15:51:49 -05:00
Scott Lahteine	3a935fd72b	Reduce repetition in menu edit items	2018-10-28 15:46:45 -05:00
Scott Lahteine	b063b1b722	Reorganize includes and declarations	2018-10-28 15:46:45 -05:00
Scott Lahteine	43cf913048	Move SD Card Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	0161d3f733	Move Custom User Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	3b0d2330b6	Move Delta Calibrate Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	6896847210	Move LED Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	9cd5471202	Move Job Recovery Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	9f11e0284c	Move Filament Change Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	d87ab3ed20	Move Advanced Settings Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	587a64d80c	Move Bed Leveling Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	96f313fb41	Move Info Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	423ab029b2	Move Temperature Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	489017995e	Move UBL Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	a489c9fa52	Move Motion Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	3a9ad9f2b1	Move Configuration Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	143d4ec043	Move Tune Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	829effc1fe	Move Main Menu to its own file	2018-10-28 15:46:45 -05:00
Scott Lahteine	37ff663b02	Convert LIGHTWEIGHT_UI to CPP	2018-10-28 15:46:45 -05:00
Scott Lahteine	a964f098b3	Make dogm status screen a CPP	2018-10-28 15:46:45 -05:00
Scott Lahteine	8055ed24ff	Move font data to a subfolder	2018-10-28 15:46:45 -05:00
Scott Lahteine	774a6e8199	Drop TALL_FONT_CORRECTION	2018-10-28 15:46:45 -05:00
Scott Lahteine	c825c419d4	Convert DOGM / HD44780 impl to CPP files	2018-10-28 15:46:45 -05:00
Scott Lahteine	182b1405d9	LCD conditionals in configurations	2018-10-28 15:46:45 -05:00
Scott Lahteine	2bf18950ab	Refactor LCD menus	2018-10-28 15:46:45 -05:00
Scott Lahteine	ac5f2762b7	Use E_AXIS_N where possible	2018-10-28 15:46:45 -05:00
MasterPIC	6fbc87301f	'G29 H' to set a centered square probe area (linear, bilinear) (#12242 )	2018-10-27 20:30:21 -05:00
Karl Andersson	c1e8bd6add	Remove STM32 board-specific delays (#12243 ) ...and replace with delays for all HAL_STM32 boards.	2018-10-27 17:26:12 -05:00
Scott Lahteine	3c9daf322a	MSG_CNG_SDCARD => MSG_CHANGE_SDCARD	2018-10-27 13:56:29 -05:00
Scott Lahteine	4b7a0a5b39	Require TMCStepper 0.2.2 or newer In reference to #12175	2018-10-27 11:15:28 -05:00
Scott Lahteine	ab8425f1b5	Clean up PROBE_TRIGGERED_WHEN_STOWED_TEST (#12232 )	2018-10-26 19:18:20 -05:00
Chris Rigter	3028a620af	Add RACK_AND_PINION_PROBE (#12218 )	2018-10-26 18:24:24 -05:00
InsanityAutomation	ad60f0691c	Add Creality3D RAMPS pins definitions (#12229 )	2018-10-26 16:09:04 -05:00
Scott Lahteine	5580773191	Use FastIO, sanity-check LPC SD options, apply formatting (#12231 )	2018-10-26 15:23:02 -05:00
Scott Lahteine	d015f746cc	Fix some compile warnings (#12220 )	2018-10-26 03:53:06 -05:00
Scott Lahteine	dacb5324e8	Fix display of Y on Graphical LCD	2018-10-26 01:43:47 -05:00
Scott Lahteine	bf9dd4f4cf	Add helpers for custom text in menu items (#12214 ) For some features it can be useful to write custom text in a menu item. This commit provides helpers to make this easier.	2018-10-25 15:17:53 -05:00
Scott Lahteine	e8031b1152	Add Custom Microstepping options	2018-10-25 11:26:32 -05:00
Scott Lahteine	fbfb48cce0	Indent a block	2018-10-25 10:52:27 -05:00
Marcio Teixeira	1a00d1bdaf	Add pullup to USB interrupt line - A pullup on the INT pin is required when the pin is level-active	2018-10-25 10:42:08 -05:00
TheSFReader	a07ac6312f	G0 feedrate may be fixed or variable (#12172 )	2018-10-25 10:35:16 -05:00
Scott Lahteine	53c535a0c1	Remove trailing whitespace	2018-10-25 09:46:33 -05:00
Roman Moravčík	55dec02ca1	Allow X, Y, Z manual move when cold. (#12209 )	2018-10-25 09:13:52 -05:00
Luc Van Daele	7243101135	z_offset fix for deltas (#12210 )	2018-10-25 09:11:26 -05:00
Scott Lahteine	9613f00877	Fix getProgress_seconds_elapsed to return seconds	2018-10-24 18:05:15 -05:00
gjdodd	5d487ef40e	Fix null exception due to duration_t of zero (#12207 )	2018-10-24 17:59:33 -05:00
Giuliano Zaro	a9061714f2	Update Italian language (#12196 )	2018-10-24 16:40:48 -05:00
InsanityAutomation	aebbb2359d	Fix IDEX homing X0 wrong direction (#12200 )	2018-10-24 16:40:06 -05:00
gjdodd	0a549fd1f2	Fix EXTENSIBLE_UI compile errors (#12206 )	2018-10-24 16:36:11 -05:00
Roman Moravčík	a80ba8fc6e	Slovak translation update (#12202 )	2018-10-24 16:02:38 -05:00
Roman Moravčík	e48cbff10d	Fixed redefinition warnings of MSG_HOTEND_TOO_COLD. (#12203 )	2018-10-24 15:00:07 -05:00
Scott Lahteine	7a04eb3a8b	Fix some comment formatting	2018-10-23 22:35:44 -05:00
Scott Lahteine	2f873a119f	Revert some UBL strings	2018-10-23 15:39:59 -05:00
Ludy	a93e9e6e9b	Use preheat labels in place of PLA/ABS (#12194 )	2018-10-23 15:38:17 -05:00
Karl Andersson	aa72884a6e	Enable use of SERIAL_PORT_2 on HAL_STM32 (#12197 )	2018-10-23 15:24:58 -05:00
Scott Lahteine	46360f18b4	Bring thermistor_75.h up to speed	2018-10-23 14:52:16 -05:00
Scott Lahteine	e229b831fa	Customizable preheat labels	2018-10-23 00:57:50 -05:00
Scott Lahteine	a553ab82e0	Add e index to _lcd_move_distance_menu	2018-10-22 23:35:04 -05:00
Scott Lahteine	3a46212dd8	Better cold extrusion prevention in LCD menu (#12189 )	2018-10-22 20:54:38 -05:00
Marcio Teixeira	fc31da1114	Implement custom delay/millis for EXTENSIBLE_UI (#12188 )	2018-10-22 19:37:48 -05:00
forkoz	3a3ab3391f	Return set_directions() to stepper.cpp (#12182 ) Initial manual Z move can be negative if your stepper is inverted. Leads to bad situations for crashed or initially booted printers.	2018-10-22 19:30:51 -05:00
Scott Lahteine	e5ae7a07d1	Suppress compiler warning	2018-10-21 13:44:27 -05:00
Hannes Brandstätter-Müller	6ee2af5e2d	Simplify pins_TRIGORILLA_14.h (#12162 )	2018-10-21 03:23:20 -05:00
Roman Moravčík	d801f85963	Correct EEPROM read/write disparities. (#12169 )	2018-10-21 02:56:31 -05:00
Scott Lahteine	8d3a92fc4a	Followup to millis_t patch	2018-10-20 23:23:58 -05:00
Ludy	44369d536a	Use millis_t where needed (#12152 )	2018-10-20 23:21:27 -05:00
Scott Lahteine	b641571098	Replace types.h with millis_t.h	2018-10-20 23:07:12 -05:00
Scott Lahteine	eeef4e630a	Fix compile error in leds.h	2018-10-20 23:07:12 -05:00
Scott Lahteine	9969c06cb5	Fix compiler warning	2018-10-20 17:16:59 -05:00
Farkas Péter	427c80119a	Hide some menu items when busy: fix typo (#12164 )	2018-10-20 15:55:31 -05:00
InsanityAutomation	55ac2f4c23	Fix filament runout for idex duplication modes (#12168 )	2018-10-20 13:39:33 -05:00
Karl Andersson	b640b3b0d6	Define ST7920 delays for board ARMED (#12161 )	2018-10-20 13:12:54 -05:00
Marcio Teixeira	2e5e689a7f	Fix kill() and ExtensibleUI (#12160 ) * Fix to isPrintingFromMedia() - isPrintingFromMedia() will now return true even if SD print is paused. - isPrintingFromMediaPaused() allows UI to determine if the print is paused. * Don't use _delay_us in minkill (#12145) - In HAL_DUE, _delay_us is simply an alias for delay, which causes the board to hang and subsequently reboot due to the watchdog timer. * Shorten code with IFSD macro	2018-10-20 01:44:46 -05:00
Scott Lahteine	b381cad399	Clean up trailing whitespace	2018-10-19 15:27:17 -05:00
Scott Lahteine	9090065e9f	Move EXTRA_FAN_SPEED above FWRETRACT	2018-10-19 15:15:00 -05:00
Karl Andersson	4eb798dbdc	Add support for Arm'ed (STM32F4) board (#12147 )	2018-10-19 14:50:52 -05:00
TheSFReader	1fb9b299d4	Add M524 to abort SD printing (#12155 )	2018-10-19 14:25:07 -05:00
Scott Lahteine	d26d9d5b81	Tweak IS_SD_INSERTED	2018-10-19 14:00:36 -05:00
Scott Lahteine	c6a5c74208	Add parentheses to SD macros	2018-10-19 13:52:57 -05:00
Giuliano Zaro	aa9202260d	Fix endstop when no interrupt (#12158 )	2018-10-19 13:45:39 -05:00
Scott Lahteine	8c02dd971b	Move disable_all_steppers to minkill	2018-10-19 13:42:04 -05:00
Scott Lahteine	3847c08f7e	Disable heaters/steppers before message	2018-10-19 13:30:46 -05:00
Marcio Teixeira	71e19baf69	Fix kill => disable_all_heaters => print_job_timer.stop (#12146 ) - Remove `print_job_timer.stop()` from `disable_all_heaters` - Call `print_job_timer.stop()` for relevant `disable_all_heaters()`. - Split up `kill()` for watchdog interrupt safety	2018-10-18 21:20:56 -05:00
Ludy	4cc1c2627e	Update German language (#12143 )	2018-10-18 19:17:37 -05:00
Ludy	75a0d46edf	Fix compile warning re: LCD_INFO_SCREEN_STYLE	2018-10-18 19:16:24 -05:00
Scott Lahteine	a81763c237	Pins E sanity check tweak	2018-10-18 18:48:23 -05:00
Giuliano Zaro	bc22641002	[2.0.x] Updated Italian Language (#12148 )	2018-10-18 18:08:39 -05:00
Michael Triffon	eded90bf87	Updated Azteeg X5 Mini Wifi pins for onboard SD (#12133 )	2018-10-18 11:52:55 -05:00
nhchiu	27a84fd021	Remove unused option in Anycubic Kossel config (#12138 )	2018-10-18 11:47:59 -05:00
Scott Lahteine	67a3c5a16a	Alternative info screen (Prusa-style) (#12132 ) * Fix Z value display * Add HAS_PRINT_PROGRESS * Alternative Info Screen option * Add LCD_INFO_SCREEN_STYLE to example configs	2018-10-18 11:34:52 -05:00
Marcio Teixeira	5b7dd553d3	Fix sd_mmc_spi_mem capacity; clean up USB code (#12134 ) - Fix an error in the return value of `sd_mmc_spi_read_capacity` which was causing the host OS to read beyond the last sector in the card. - Clean up the USB flashdrive code and add better debugging.	2018-10-18 11:34:07 -05:00
Scott Lahteine	df768e7d8f	Followup to #12129	2018-10-18 11:29:49 -05:00
Chris Pepper	3c13c9e3e9	[LPC176x] Fix USEABLE_HARDWARE_PWM macro, cleanup multiple LED support (#12129 )	2018-10-18 11:26:50 -05:00
InsanityAutomation	a768df83cb	Remove stale variable (#12136 )	2018-10-18 11:26:14 -05:00
Hannes Brandstätter-Müller	c36773bffb	Update the Ender-4 example config (#12131 ) - Enable filament change menu - Enable bed-PID - Enable s-curve acceleration - Enable some menu items - Update from Skorpi's new version - Fix extruder steps, deactivate nozzle clean feature	2018-10-17 15:49:52 -05:00
Ludy	9c71bff5e8	Update German language (#12115 )	2018-10-17 11:17:06 -05:00
Nils Hasenbanck	9deb23aa47	Add missing SerialUSB definition for STM32 HAL (#12124 )	2018-10-17 11:14:10 -05:00
Nils Hasenbanck	0519ef0802	Update pins for final RemRam v1.3 board (#12125 )	2018-10-17 11:13:38 -05:00
InsanityAutomation	3ec3872730	Single Z raise value for all tool-changing / parking (#12090 ) * Universal tool-change Z lift * Add TOOLCHANGE_ZRAISE to example configs * Park/unpark changes to example configs * Implement DEBUG_DXC_MODE	2018-10-17 11:11:41 -05:00
Scott Lahteine	6bdbe3299e	Fix a comment	2018-10-17 10:33:54 -05:00
Scott Lahteine	bc75eb2c64	Cleanup for HAL_spi_Due.cpp	2018-10-17 10:33:54 -05:00
AnHardt	d82bcdeea1	Make PULSE_STOP(E) conditional (#12121 )	2018-10-17 09:52:57 -05:00
Chris Pepper	c90e26dfa6	fix normal extruder stepping (#12118 )	2018-10-17 02:47:31 -05:00
Hannes Brandstätter-Müller	96bbda5d48	remove confusing comment (#12120 )	2018-10-17 02:47:03 -05:00
Marcio Teixeira	f98f4ac7ea	Fix and improve EXTENSIBLE_UI (#12117 ) - Add methods to access print counter data - Clean up some inconsistent method names - Clear lcd status after filament change - Implement `lcd_reset_status` so it works like UltraLCD	2018-10-16 16:58:29 -05:00
Scott Lahteine	8bf596bd4c	RETRACT_ZLIFT => RETRACT_ZRAISE	2018-10-16 16:46:40 -05:00
Marcio Teixeira	056561df93	[2.0.x] Enhancements to FILAMENT_RUNOUT_SENSOR (#12069 ) - Added FILAMENT_RUNOUT_DISTANCE_MM option - Added FILAMENT_MOTION_SENSOR option	2018-10-16 07:28:52 -05:00
Scott Lahteine	cce4931342	Clean up recent contribs	2018-10-16 06:45:44 -05:00
Karl Andersson	8b5e51c9aa	STM32F4xx modifications for HAL_STM32 (#12080 )	2018-10-16 06:42:41 -05:00
Scott Lahteine	bf0c809ff2	Update M165 comment	2018-10-16 06:10:27 -05:00
AnHardt	9ac9649183	Mixer - update descriptions (#12108 )	2018-10-16 06:09:02 -05:00
Scott Lahteine	9bf5d4331c	Clear up some compiler warnings	2018-10-16 05:47:02 -05:00
Scott Lahteine	0139762a96	Fix a sanity check	2018-10-16 05:46:33 -05:00
Scott Lahteine	2ecb124e42	Fix trailing whitespace	2018-10-16 03:50:16 -05:00
AnHardt	f56968ba0b	New Continuous Filament Mixer (#12098 )	2018-10-16 03:38:57 -05:00
Ludy	2d2cd628c6	Update German language (#12094 )	2018-10-16 02:59:04 -05:00
Scott Lahteine	84b59d58fb	Clean up whitespace	2018-10-16 02:02:20 -05:00
swilkens	06e2afe8e0	[2.0.x] Reduce HOMING_FEEDRATE_XY for Ender 3 (#12105 ) Homing on the Ender 3 with HOMING_FEEDRATE_XY set to 50*60 was shown (#12074) to cause the end-stop micro-switches to bottom out, causing the carriage for both X and Y axis to physically crash into the micro switch. Reducing the homing speed prevents the switches from bottoming out.	2018-10-16 01:51:47 -05:00
TheSFReader	af939c158a	Option for G0 to have a separate feedrate (#12089 )	2018-10-16 01:49:51 -05:00
Christopher Pepper	e5b4bf22d4	Remove debug output from flash persistent store implementation	2018-10-14 18:43:48 +01:00
Christopher Pepper	42fb7c14b0	Update the sdcard usb sharing config and apply to Re-ARM	2018-10-14 18:43:48 +01:00
Christopher Pepper	254b68fe2c	servo update	2018-10-14 18:43:48 +01:00
Andy Shaw	870bfd08f5	usb and sdcard sharing improvements * Add traceback after watchdog timeout Add the cpability to perform a traceback following a watchdog timeout. * Enhanced hardware SPI Allow use of either SSP0 or SSP1. Ensure that no data is left in I/O buffers after calls to enable sharing of SSP hardware. * Make flash emulation of eeprom the default Make use of flash for eeprom storage the default. This means that usage of eeprom will not cause USB drive mount/unmount operations. * Allow sharing of SD card SD card I/O operations from the USB stack take place in idle loop, rather than at interrupt time. Allowing sharing of the SPI bus. New configuration options to allow usage of the SD card to be specified. * Fix problem with hardware SPI pins	2018-10-14 18:43:48 +01:00
Christopher Pepper	5ddf52d58e	[HAL][LPC176x] Pull out framework into separate repository Framework and build platform now located at https://github.com/p3p/pio-framework-arduino-lpc176x and https://github.com/p3p/pio-nxplpc-arduino-lpc176x respectively fix mkssbase leds move hardware serial remove hardware/software serial Hardware Serial extraction HardwareSerial ISRs fix disabled serial2 causing Serial object to link move usb devices out to framework separate out adc/pwm peripheral function from hal.cpp fix includes remove unused pwm init move adc HAL header update templated filtered adc LPC1769 platform	2018-10-14 18:43:48 +01:00
Roman Moravčík	213e94bce2	[2.0.x] Updated slovak translation (#12059 )	2018-10-14 02:15:15 -05:00
Karl Andersson	a40458405a	Fix datasize error when FWRETRACT is disabled (#12086 )	2018-10-14 02:14:34 -05:00
Scott Lahteine	951b25163e	Extend M217 with configurable park/raise (#12076 )	2018-10-13 23:08:20 -05:00
Kevin Velickovic	ea13a77dcb	Fixed Z-Probes NO/NC for Anycubic Kossel (#12083 )	2018-10-13 20:34:56 -05:00
N95JPL	ab9d5eb38d	Add Bootscreen Animation (#12077 )	2018-10-12 22:11:20 -05:00
Scott Lahteine	26208a5c2f	Clean up some boot screens	2018-10-12 18:56:39 -05:00
Scott Lahteine	9b6be0ae0f	Fix lite status screen SD %	2018-10-12 17:02:59 -05:00
Scott Lahteine	af3bf6c956	Tweak config spacing	2018-10-12 16:09:27 -05:00
Scott Lahteine	a44ef27897	Outdent singlenozzle toolchange code	2018-10-12 15:19:03 -05:00
Scott Lahteine	d338e4d875	Fix singlenozzle toolchange cold extrusion test	2018-10-12 15:15:25 -05:00
Roxy-3D	25b980dddb	Remove erroneous Pin 12 definition There is no switchable Power Supply. Don't put it on Pin 12. (Pin 12 is actually FAN1)	2018-10-12 13:45:04 -05:00
Scott Lahteine	ddaef1a60c	Clean trailing whitespace	2018-10-11 21:40:55 -05:00
Scott Lahteine	1407afad73	Move SENSITIVE_PINS to its own file	2018-10-11 01:10:11 -05:00
Scott Lahteine	45e738876a	Add stepper MS3 support Co-Authored-By: TheLongAndOnly <thelongandonly@users.noreply.github.com>	2018-10-11 01:10:11 -05:00
Giuliano Zaro	d43d4e4219	Refactor PRINTER_EVENT_LEDS, apply to M303 (#12038 ) Co-Authored-By: Giuliano Zaro <gmagician@users.noreply.github.com>	2018-10-10 21:25:43 -05:00
Giuliano Zaro	d8d76cd2ba	[2.0.x] Italian language update (#12060 )	2018-10-10 20:13:10 -05:00
Scott Lahteine	e8d2cf4fb5	EEPROM followup (tmc_stepper_current_t)	2018-10-10 17:25:45 -05:00
Scott Lahteine	50cbca4c55	Hide some menu items when busy	2018-10-10 17:18:33 -05:00
InsanityAutomation	3cb5517ddb	Make singlenozzle tool-change honor no_move (#12056 ) ...Set no move earlier so it applies	2018-10-10 16:49:59 -05:00
InsanityAutomation	d332fcb8fa	Fix firmware-retract compile errors (#12061 )	2018-10-10 16:46:08 -05:00
Scott Lahteine	43940d59ed	Fix trailing spaces	2018-10-10 16:24:35 -05:00
InsanityAutomation	b2c1cd7eda	Allow cold change of active extruder (#12055 ) Followup to #11994	2018-10-10 09:57:48 -05:00
Scott Lahteine	d556dc1865	Fix and improve EEPROM storage (#12054 ) * Clean up Temperature PID * Improve EEPROM read/write/validate * Group `SINGLENOZZLE` saved settings * Group planner saved settings * Group filament change saved settings * Group skew saved settings * Group `FWRETRACT` saved settings	2018-10-10 09:45:20 -05:00
Scott Lahteine	9b5c1a5e77	Fix EEPROM checksum bug Addressing #12048	2018-10-10 06:14:58 -05:00
Scott Lahteine	272d4a5167	Apply #pragma once	2018-10-10 02:57:01 -05:00
Scott Lahteine	07d33849b0	Fix unused var warning, apply ENABLED	2018-10-09 21:31:28 -05:00
Hannes Brandstätter-Müller	a3e8cb1e44	[2.0.x] Ender-4 small improvements in Configuration (#11843 )	2018-10-09 20:58:22 -05:00
Scott Lahteine	cf5284cdf2	Add SD Firmware Update capability (#12043 ) Co-Authored-By: timoxd7 <timoxd7@users.noreply.github.com>	2018-10-09 20:00:47 -05:00
Scott Lahteine	0bd54392b7	Use uint8_t in EEPROM code	2018-10-09 19:00:01 -05:00
Scott Lahteine	ce82015d5f	Fix include in G80	2018-10-09 17:24:56 -05:00
Marcio Teixeira	cef1de89d0	Fixed incorrect axis index. (#12051 )	2018-10-09 16:59:34 -05:00
Marcio Teixeira	d6d48e63fb	Allow #defined TYPE arg to ultralcd menu macros (#12041 ) Previously, it was not possible for the TYPE argument to ultralcd menu macros to itself be a #defined value. This made it difficult to create variables to set many related menu items to a common precision that could be easily changed.	2018-10-08 20:01:00 -05:00
Emilio Moretti	2ef7175b42	Update Ender-2 BED_MAXTEMP (#12042 ) Also added details to the README to make sure the Ender-2 status is properly documented.	2018-10-08 19:57:44 -05:00
Scott Lahteine	5f6aabccbe	Tweak M48 spacing	2018-10-08 19:11:25 -05:00
Marcio Teixeira	ec9aa4f468	[2.0.x] Miscellaneous fixes (#12039 ) * Allow override of soft SPI pins in `pins_.h` Add default case to avoid compiler warning. * Additional pin definitions for Archim 2. * Einsy Retro has same timings as Einsy Rambo.	2018-10-08 18:14:52 -05:00
Marcio Teixeira	906a24fa81	Extensible user interface API (#11193 )	2018-10-08 15:44:05 -05:00
InsanityAutomation	ee253991d4	Various fixups for single-nozzle filament swap (#12036 )	2018-10-08 15:39:55 -05:00
Marcio Teixeira	8dbb305e8e	Fix "Missing separator" errors. (#12035 ) - Makefiles require tabs (not spaces) before shell commands. - Other indentation can either be space or tabs.	2018-10-08 14:28:52 -05:00
Scott Lahteine	55e810d512	Fix G80 compilation	2018-10-08 13:11:36 -05:00
Scott Lahteine	d5017e2788	Add status screen with 4 nozzles	2018-10-08 01:27:21 -05:00
Scott Lahteine	7db0113b53	Improve E_AXIS_N macro	2018-10-07 18:22:05 -05:00
Nils Hasenbanck	191df5e17d	Correct PWM_PIN behavior for STM32 HALs (#12027 )	2018-10-07 17:08:01 -05:00
Sam Lane	f2ecf8d510	Add option to control Solenoids under PARKING_EXTRUDER (#12028 )	2018-10-07 17:07:12 -05:00
InsanityAutomation	74cd6cb4fc	Single nozzle filament change (#11994 )	2018-10-07 17:06:14 -05:00
Scott Lahteine	bfcf570d68	Try ISR_ALIASOF for Endstop Interrupts	2018-10-07 17:05:32 -05:00
Giuliano Zaro	c0d9058e25	Shorten an Italian menu title (#12034 ) …and change a multi-use "back" menu item.	2018-10-07 16:43:48 -05:00
teemuatlut	dffb4c63dc	[2.0.x] TMC2660 followup (#12029 ) * Don't react to s2g on TMC2660. False positives * Init with sensorless probing as well	2018-10-07 15:37:44 -05:00
Scott Lahteine	d6b0fbd771	Use uint8_t for all fan speeds (#12032 )	2018-10-07 15:34:41 -05:00
Scott Lahteine	cb7844c8d4	Save PROGMEM on serial prefixes (#12033 ) With default config and `EEPROM_SETTINGS`, saves over 200 bytes of PROGMEM.	2018-10-07 15:32:15 -05:00
Scott Lahteine	07db08e39d	Fix EXTRUDER_AUTO_FAN_SPEED comment	2018-10-06 19:51:17 -05:00
Scott Lahteine	ca0e308105	Fix up some units comments	2018-10-06 19:45:50 -05:00
Scott Lahteine	65b8f3821b	Suppress temperature.h compile warning	2018-10-06 19:29:41 -05:00
teemuatlut	c447d75916	Add support for TMC2660 (#11998 )	2018-10-06 17:18:10 -05:00
Scott Lahteine	cf0b9eb37c	no need to use destination in do_pause_e_move	2018-10-06 16:43:21 -05:00
Scott Lahteine	e8d677620c	Use NUM_SERVOS in EEPROM code Fix #12015	2018-10-06 15:11:32 -05:00
Scott Lahteine	0fcdfdeed6	Followup to #12017	2018-10-06 13:23:58 -05:00
Phr3d13	acac2adfc8	Add support for MeCreator2 (#12017 )	2018-10-06 12:26:49 -05:00
Thomas Moore	49823a4939	Fix broken jerk handling (#12019 ) Fix #12004	2018-10-06 12:02:50 -05:00
Scott Lahteine	52a37913c1	Extend and apply some corrections	2018-10-06 00:27:21 -05:00
Scott Lahteine	77b9a41f1f	Add G-code extensions to example configs	2018-10-06 00:15:35 -05:00
thesfreader	e09c144674	Add CNC-like G-code options	2018-10-06 00:15:27 -05:00
Scott Lahteine	33056046a3	STM32 non-generic PWM_PIN and USEABLE_HARDWARE_PWM (#12016 )	2018-10-06 00:14:12 -05:00
Scott Lahteine	d5141c4e03	Fix up leading/trailing whitespace	2018-10-05 18:19:59 -05:00
Marcio Teixeira	03fc4d31d0	Makefile support for 32-bit Archim board and new TMC library (#11997 ) * Support new TMC library and 32-bit Archim board - Added IS_MCU flag - When IS_MCU flag is 1, AVR compiler will be used - When IS_MCU flag is 0, ARM compiler will be used - Added support for new TMC library - Added support for a 32-bit Archim board, which could probably be used as a basis for other 32-bit boards.	2018-10-05 16:06:11 -05:00
Scott Lahteine	65b36642f8	Fix Anycubic Kossel config	2018-10-04 20:27:05 -05:00
Scott Lahteine	fc326b3dde	Add USB_FLASH_DRIVE_SUPPORT to examples Co-Authored-By: marcio-ao <marcio@alephobjects.com>	2018-10-04 19:54:12 -05:00
Marcio Teixeira	2067619a26	Add USB_FLASH_DRIVE_SUPPORT	2018-10-04 19:54:12 -05:00
Giuliano Zaro	07fe8d28be	[2.0.x] Partial Italian revert (#12008 ) - Use a comma for decimals just in one message has not been a good idea. - Full comments translation	2018-10-04 14:38:54 -05:00
Scott Lahteine	517b4f4cd4	Fix lightweight UI hotends display	2018-10-04 14:37:24 -05:00
Giuliano Zaro	72a750e0eb	[2.0.x] Update Italian language (#11996 )	2018-10-04 03:03:47 -05:00
Scott Lahteine	bb561baf9e	Tweak some config comments	2018-10-04 02:42:12 -05:00
Nils Hasenbanck	fcf6d127fd	STM32 timer simplification (#11995 ) Prescalers aren't calculated for the given target frequency. Stepper timer should run at 2 Mhz and temperature timer at 72 Khz.	2018-10-03 22:33:24 -05:00
Scott Lahteine	8daadd2c8c	Fix TMC_DEBUG undefined report_tmc_status (#11993 )	2018-10-03 11:56:49 -05:00
Scott Lahteine	c40ea1f0fd	Update EEPROM_VERSION And set EEPROM_OFFSET to 0, since the historical 100 skipped bytes are never used.	2018-10-03 11:34:34 -05:00
Scott Lahteine	1358bd9319	Make MAX_EXTRUDERS always 6	2018-10-03 11:32:19 -05:00
AnoNymous	001f26b642	Template struct simplification for serial (#11990 )	2018-10-03 11:01:21 -05:00
Scott Lahteine	348004c34f	STM32F7 HAL using the official STM32 Arduino Core (#11750 )	2018-10-03 03:26:07 -05:00
Scott Lahteine	3e58b3a5d4	Followup to #11943	2018-10-03 02:55:10 -05:00
teemuatlut	c3229e1b34	Migrate to a new TMC library (#11943 )	2018-10-03 02:48:49 -05:00
brian park	2abf3d258d	Korean language translation support (#11987 )	2018-10-03 01:53:34 -05:00
Eduardo José Tagle	d6955f25b2	Expand serial support in DUE/AVR hals exploiting the templated MarlinSerial classes (#11988 )	2018-10-03 00:47:27 -05:00
Eduardo José Tagle	f6f2246f59	Templatized serial classes (#11982 )	2018-10-02 22:15:30 -05:00
Scott Lahteine	ee53f7d813	Revert header reorg.	2018-10-02 22:09:41 -05:00
Scott Lahteine	d619ba2685	Tweak STM32F4 config	2018-10-02 22:03:00 -05:00
LineF	d777cef837	fixed minimum macro (#11986 )	2018-10-02 21:35:34 -05:00
Scott Lahteine	e3f7b69105	Add PROBING_STEPPERS_OFF (#11984 ) Co-Authored-By: houseofbugs <houseofbugs@gmail.com>	2018-10-02 05:13:58 -05:00
Scott Lahteine	0e5bcdf695	Make DISABLE_INACTIVE_EXTRUDER a simple switch	2018-10-02 04:57:03 -05:00
Scott Lahteine	0dedb3e139	Reorganize some core headers (#11983 )	2018-10-02 04:25:46 -05:00
Thomas Moore	ab4549d2bc	[2.0.x] Add simultaneous retraction for mixing extruder (#11941 )	2018-10-01 23:32:02 -05:00
Scott Lahteine	c75f5a376b	Tweak some comments	2018-10-01 18:34:14 -05:00
Scott Lahteine	f4c625d3a1	Ensure MIN/MAX overrides	2018-10-01 05:32:55 -05:00
Scott Lahteine	3019713402	Reorganize some enums	2018-10-01 05:32:55 -05:00
Scott Lahteine	606a4362b3	Reduce STM32F4 compile warnings	2018-10-01 04:41:17 -05:00
Scott Lahteine	b3154b2120	Apply MOVE_Z_WHEN_IDLE to example configurations Co-Authored-By: dot-bob <gibben@gmail.com>	2018-10-01 01:41:11 -05:00
dot-bob	b0fd8f2d74	Add option to move Z on double-click when idle	2018-10-01 01:41:11 -05:00
Scott Lahteine	389376c40e	Clean up softspi.h	2018-10-01 01:29:48 -05:00
Scott Lahteine	e78bdd654d	Clean up BABYSTEP options	2018-10-01 01:29:21 -05:00
InsanityAutomation	8ae113ff36	Show zprobe_zoffset when BABYSTEP_HOTEND_Z_OFFSET is disabled (#11973 )	2018-10-01 00:30:10 -05:00
InsanityAutomation	2e98437392	Clean up main menu (#11972 )	2018-10-01 00:15:06 -05:00
InsanityAutomation	6d862b2916	Home before level corners, if needed (#11976 ) …and add a consistent homing screen for all LCD pre-homing.	2018-10-01 00:14:28 -05:00
Scott Lahteine	11ac75edcb	Use PGM_P for PSTR pointers (#11977 )	2018-09-30 23:44:33 -05:00
InsanityAutomation	4d5566a6b7	Add filament runout sensor menu item (#11971 )	2018-09-30 21:33:46 -05:00
Scott Lahteine	8489673cea	Adjust some HAL formatting	2018-09-30 21:24:37 -05:00
Scott Lahteine	fb8a07660a	Followup to minmax patch Co-Authored-By: Palatis <palatis@gmail.com>	2018-09-30 21:17:31 -05:00
Scott Lahteine	3c40933713	Remove trailing spaces, old comment	2018-09-30 20:47:06 -05:00
Hannes Brandstätter-Müller	a3ec805c97	Anycubic Kossel Linear+: corrected DELTA_DIAGONAL_ROD (#11964 )	2018-09-30 05:41:26 -05:00
AnoNymous	b30ca652ae	Replace MIN# / MAX# with variadic MIN / MAX (#11960 )	2018-09-30 04:59:14 -05:00
Scott Lahteine	e10f730478	Tweak vector_3::apply_rotation	2018-09-30 01:51:33 -05:00
Scott Lahteine	e2ab78d876	Fix SERIAL_PORT_2 sanity check	2018-09-30 00:24:10 -05:00
AnoNymous	a644d8cb93	Avoid copies in vector and matrix (#11959 )	2018-09-29 23:04:40 -05:00
Scott Lahteine	693865a649	Fix some whitespace	2018-09-29 22:36:36 -05:00
Scott Lahteine	9903305dda	Merge pull request #9582 from tcm0116/2.0.x-sensorless_probing [2.0.x] Add TMC2130 sensorless probing	2018-09-29 21:02:22 -05:00
Scott Lahteine	14df753086	Correction for block->mix_steps Fix #11484	2018-09-29 19:13:17 -05:00
Alexander Amelkin	2ecfda80ac	Improve support for JTAG/SWD pins reuse (#11963 ) STM32 can reuse JTAG and SWD pins separately. Add `DISABLE_DEBUG` option to disable both interfaces and retain `DISABLE_JTAG` to disable JTAG only.	2018-09-29 19:00:49 -05:00
Scott Lahteine	bb47009656	Apply sensorless changes to example configs	2018-09-29 18:54:14 -05:00
Thomas Moore	3286325044	Add TMC2130 sensorless probing	2018-09-29 18:54:14 -05:00
Scott Lahteine	7d5c336c56	Corrections for dylsexic TMC	2018-09-29 18:51:11 -05:00
Scott Lahteine	d89d8fe852	Fix Busy State in temperature.cpp Fix #11954	2018-09-29 17:03:35 -05:00
Giuliano Zaro	70e7a465d8	[2.0.x] Fix compile error (#11951 ) Fix compile error intruduced with M109 modification	2018-09-29 13:48:23 -05:00
Hannes Brandstätter-Müller	935b120949	Anycubic Kossel: probe closer to the edge (#11950 )	2018-09-29 02:26:16 -05:00
Scott Lahteine	1410e79e7f	Ensure M109 handles autotemp	2018-09-29 02:12:06 -05:00
Scott Lahteine	e4389f7d23	Standard methods to wait for heating (#11949 )	2018-09-29 01:44:47 -05:00
Scott Lahteine	bdc9889d3a	Fix a sanity check	2018-09-29 00:24:25 -05:00
Scott Lahteine	321f9140d1	Followup to #11904	2018-09-28 20:04:40 -05:00
InsanityAutomation	23114aeb81	Fix garbled M119 output. Honor NUM_RUNOUT_SENSORS (#11948 )	2018-09-28 19:00:11 -05:00
Scott Lahteine	1667ed9d1c	Pause should use ECHOLNPGM	2018-09-28 18:15:38 -05:00
Victor Tseng	93839e2f73	Add option to enable/disable autoretract altogether (#11904 )	2018-09-28 16:52:56 -05:00
Scott Lahteine	ad21a4f07b	Tweaks to HAL format and order	2018-09-28 15:59:50 -05:00
Scott Lahteine	b682a1961a	Tweak STM32F7 TMC2660 class	2018-09-27 21:13:15 -05:00
Scott Lahteine	a0a3b23e35	Reduce Raptor bootscreen by 144 bytes	2018-09-27 18:24:40 -05:00
InsanityAutomation	95d793456b	Add Formbot Raptor config, fix other Formbot configs (#11926 )	2018-09-27 19:20:43 -04:00
Mitch Roote	d016b572e3	[2.0.x] Add pin configuration for Fysetc F6 (#11932 )	2018-09-27 19:20:19 -04:00

... 14 15 16 17 18 ...

10742 commits