Marlin-Artillery-M600

Archived

Author	SHA1	Message	Date
Scott Lahteine	50b6204079	Fix LIN_ADVANCE max_e_jerk_factor According to https://github.com/MarlinFirmware/Marlin/issues/9917#issuecomment-399204568	2018-06-21 22:02:34 -04:00
Scott Lahteine	99591dc20c	Filter endstops state at all times (#11066 )	2018-06-21 20:14:16 -05:00
Scott Lahteine	a5c11bf578	Merge pull request #11075 from thinkyhead/bf2_value_editing [2.0.x] Fix value editing (with callback)	2018-06-21 20:13:58 -05:00
Roxy-3D	1d7dd0edfd	Add the move_z_after_probing() functionality to UBL's G29 J	2018-06-21 13:26:20 -05:00
Scott Lahteine	383129728a	Edit Z fade as whole numbers	2018-06-21 11:52:29 -04:00
Scott Lahteine	1239e8eda2	Fix value editing with callback	2018-06-21 11:52:03 -04:00
Scott Lahteine	7a84b03796	Use MIN/MAX in post-conditionals	2018-06-20 03:15:19 -05:00
Scott Lahteine	a2a30ff0ac	Use Tool 0 for Dual X Axis G29 See https://github.com/MarlinFirmware/Marlin/issues/5597#issuecomment-397683325	2018-06-20 01:32:23 -05:00
Scott Lahteine	e366d55bc2	Don't reset stepper timeout for all g-codes	2018-06-19 21:48:28 -05:00
Scott Lahteine	7406f04029	Use MAX (not max) in stepper.h	2018-06-19 20:51:07 -05:00
Roxy-3D	7c54c4ed27	Tiny improvement to M7219 The registers within the Max7219 can get corrupted a number of ways. This allows the Max7219 to be reset and fully initialized. And... it also allows the user to see the initialization pattern.	2018-06-19 14:46:30 -05:00
Giuliano	a65d15c905	[2.0.x] Fix Italian msg len (#11058 ) Fix message to long for 12864 display	2018-06-18 22:04:55 -05:00
Scott Lahteine	d4795e5b8e	[2.0.x] Tweaks and additions for MAX7219 (#11034 )	2018-06-18 22:04:03 -05:00
Scott Lahteine	e23677a7b2	Update some G-code comments	2018-06-18 16:13:01 -05:00
Chris Pepper	0312c42f9d	[2.0.x] LPC176x Serial cleanup (#11032 )	2018-06-16 20:59:22 -05:00
Scott Lahteine	c1269c2ec1	Tweak AVR critical section defines	2018-06-16 17:42:32 -05:00
Scott Lahteine	da94e0bd27	Unsigned eeprom mesh addresses	2018-06-15 15:51:57 -05:00
Chris Pepper	f88adcbfd5	[2.0.x][LPC176x] Fix binary linking broken by pio update (#11026 )	2018-06-15 15:32:51 -05:00
Simon Jouet	e2aeda61ed	HAL for Espressif ESP32 Wifi	2018-06-13 19:33:35 -05:00
Scott Lahteine	091f742432	Add WIFISUPPORT to example configs	2018-06-13 19:27:33 -05:00
Scott Lahteine	19d4c7c1cd	Tweak HAL header comments	2018-06-13 19:08:42 -05:00
Giuliano	cce0523a95	[2.0.x] reset bltouch on home (#11018 ) Added reset bltouch instead. This ensure properly stow even when in error.	2018-06-13 14:09:13 -05:00
Scott Lahteine	4c8d6df13c	Extra insurance against endstop false positives (#11013 )	2018-06-13 01:22:02 -05:00
Scott Lahteine	81edbfa665	Merge pull request #11004 from ejtagle/always_honor_maximum_step_rate [2.0.x] Fix stepper pulse minimum period and timing calculations	2018-06-12 22:17:22 -05:00
Scott Lahteine	f3fed52348	Fix coolstep_min_speed / sensorless homing Fix #8890	2018-06-12 22:12:46 -05:00
etagle	a215725df6	Fix stepper pulse timing Always honor minimum period on stepper pulse generation, and fix timing calculations Signed-off-by: etagle <ejtagle@hotmail.com>	2018-06-12 21:34:24 -05:00
Scott Lahteine	0d79128c8d	Localize stepper-specific defines	2018-06-12 21:16:54 -05:00
Scott Lahteine	a9861a780e	Tweak HAL heading	2018-06-12 19:40:17 -05:00
Scott Lahteine	cf53e502a2	No need to set input after attachInterrupt	2018-06-12 18:43:11 -05:00
Karl Andersson	e0276d2f32	Official STMicroelectronics Arduino Core STM32F4 HAL compatibility (#11006 )	2018-06-12 18:38:00 -05:00
Scott Lahteine	4dbec774b5	HAL__TIMER_RATE => _TIMER_RATE	2018-06-12 16:39:12 -05:00
Scott Lahteine	12689f2470	Merge pull request #11001 from thinkyhead/bf2_junction_deviation_fix [2.0.x] Updates for junction_deviation_mm	2018-06-11 22:31:17 -05:00
Scott Lahteine	9b945c13a1	Fix STM32F1 ISR_ENABLED	2018-06-11 22:09:45 -05:00
Scott Lahteine	9d04f47d98	Improvements for junction_deviation_mm - Drop `max_jerk` with `JUNCTION_DEVIATION` - Add `max_e_jerk_factor` for use by `LIN_ADVANCE` - Recalculate `max_e_jerk_factor` when `junction_deviation_mm` changes - Fix LCD editing of `junction_deviation_mm`	2018-06-11 22:05:16 -05:00
Scott Lahteine	f2c3b0d476	Use bit flags for homed/known	2018-06-11 22:05:16 -05:00
Scott Lahteine	4832be52d7	Followup to G29 O	2018-06-11 21:57:26 -05:00
Robert Mendon	86170e6a66	[2.0.x] Add O (optional) flag to G28/G29 (#10913 )	2018-06-11 21:51:48 -05:00
Alexey Shvetsov	2ddba201c0	STM32F1 HAL Fixes (#10999 ) - Enable / disable interrupts with `__iSeiRetVal` / `__iCliRetVal` - Add STM32F1 to Travis CI tests	2018-06-11 20:00:56 -05:00
Scott Lahteine	43bdd0bfe4	Fix indent in stepper.h	2018-06-11 19:17:46 -05:00
Scott Lahteine	2ba198a624	Tweak M122 report spacing	2018-06-10 20:33:18 -05:00
Eduardo José Tagle	5590c8ffd0	Fix MarlinSerial (AVR) (#10991 ) An undocumented hw bug makes the UART lose chars when RX ISR is disabled, even for a very small amount of time. This happens when RX_BUFFER > 256, and the result is corrupted received commands. Solved by implementing pseudo-atomic operations on 16bit indices.	2018-06-10 20:32:20 -05:00
Scott Lahteine	3fd1f32b73	Fix ADC key and chamber temp	2018-06-10 20:11:40 -05:00
Scott Lahteine	117fd007a9	Followup to pin error change	2018-06-10 19:28:45 -05:00
Scott Lahteine	ae07a3e4aa	Multiplier edit large ranges	2018-06-10 18:22:12 -05:00
Scott Lahteine	20a5db03bb	Junction Deviation limit (0.01 to 0.3)	2018-06-10 18:22:08 -05:00
Scott Lahteine	a2f521d34b	Add Junction Deviation mm runtime setting (#10990 )	2018-06-10 18:02:54 -05:00
Scott Lahteine	590ce1c33e	Fix serial debug ouput	2018-06-10 17:54:22 -05:00
Scott Lahteine	968a5d2e63	Protected pin err for M226	2018-06-10 17:45:47 -05:00
Scott Lahteine	4b90cd8ead	Merge pull request #10922 from ejtagle/bugfix-2.0.x [2.0.x] Adaptive multiaxis step smoothing, and tons of fixes	2018-06-10 16:28:52 -05:00
Giuliano	f1cdfe3dfd	[2.0.x] stow bltouch before start homing (#10987 )	2018-06-10 16:27:14 -05:00
etagle	6f14bcaa3e	Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping The timing value should be properly set for ALL boards. The compiler will check and set maximum step rate calculations based on those values.	2018-06-10 16:02:47 -05:00
etagle	39a7e7720d	Adaptive multiaxis step smoothing - Stepper bugs fixed - Support MIXING_EXTRUDER with Linear Advance - Miscellaneous cleanup	2018-06-10 16:02:47 -05:00
etagle	99af086cea	Add hidden Serial overflow debug options	2018-06-10 04:25:42 -05:00
etagle	d90e8fcad9	Fix XON/XOFF implementation Pointed out by @GMagician	2018-06-10 04:25:42 -05:00
Scott Lahteine	bbf80440bf	Add sanity-check for MOTHERBOARD	2018-06-10 04:03:33 -05:00
Giuliano	b64cc9329e	[2.0.x] Fix dual enstop home (#10980 )	2018-06-10 02:08:47 -05:00
Scott Lahteine	8a376e6beb	Update MINIMUM_STEPPER_PULSE description	2018-06-10 00:13:03 -05:00
Scott Lahteine	3701869e6c	Add HAL_timer_start for AVR, use stepper timer to time pulses	2018-06-09 22:30:13 -05:00
Giuliano	e970e429b6	[2.0.x] Fix null check in lsDive (#10978 )	2018-06-09 22:03:49 -05:00
etagle	d82704354f	Increase the planner first block HOLD delay to 100mS	2018-06-09 21:12:37 -05:00
Scott Lahteine	779d4a17a0	Highlight 64128N and common ST7565 difference Followup to #10920, addressing #10962	2018-06-09 19:18:41 -05:00
Scott Lahteine	b9418439b9	Prevent MB false-positive on bad board name	2018-06-08 19:58:43 -05:00
Scott Lahteine	88314b8910	CREALITY_ENDER is long gone As noted in #10965	2018-06-08 19:53:21 -05:00
Scott Lahteine	334341c632	Hephestos config updates (#10960 )	2018-06-07 21:23:55 -05:00
Scott Lahteine	f74278b8b1	Add -4 thermocouple to list in configs	2018-06-07 21:04:06 -05:00
Scott Lahteine	7ba5afff01	Allow FAN_PIN override, pins cleanup (#10956 )	2018-06-07 16:46:13 -05:00
Scott Lahteine	55aedf036b	Fix M503 ABL mesh report. (Zero-based IJ indices)	2018-06-07 16:36:50 -05:00
Scott Lahteine	e7623b5788	Restore Z_PROBE_PIN to pinsDebug_list.h	2018-06-07 15:39:24 -05:00
Scott Lahteine	a426986df8	Ensure pins set to INPUT after attachInterrupt (#10928 )	2018-06-06 20:59:08 -05:00
Scott Lahteine	d8b983f624	More concise M503 output for M906, M913, M914 (#10947 )	2018-06-06 20:58:28 -05:00
Giuliano	eb1026d438	[2.0.x] Fix compile warning (#10931 )	2018-06-05 22:44:34 -05:00
Scott Lahteine	c2bdbdffaa	Prevent a buffer overflow in diveToFile Co-Authored-By: akunt	2018-06-05 22:13:17 -05:00
Giuliano	c9d1a620d4	[2.0.x] fix indentations (#10934 )	2018-06-05 02:03:26 -05:00
Roxy-3D	d550da084f	Fix Max7219 control pins for use with 32-bit platforms	2018-06-04 13:37:23 -05:00
Scott Lahteine	c16e41e9e6	STM32F4 pins cleanup	2018-06-03 19:08:04 -05:00
Scott Lahteine	c685c7b7dd	STM32F4: All pins can do PWM	2018-06-03 04:30:15 -05:00
Scott Lahteine	2fd9ba56da	LED menu item bool (like Case Lights)	2018-06-03 00:34:29 -05:00
Scott Lahteine	ad8d3150aa	Cleanup for dual endstops homing	2018-06-03 00:34:29 -05:00
Scott Lahteine	61181b7f24	Add macros for ST7565 commands	2018-06-02 20:48:44 -05:00
Eduardo José Tagle	d3c02410a8	[2.0.x] Small assorted collection of fixes and improvements (#10911 ) * Misc fixes and improvements - Get rid of most critical sections on the Serial port drivers for AVR and DUE. Proper usage of FIFOs should allow interrupts to stay enabled without harm to queuing and dequeuing. Also, with 8-bit indices (for AVR) and up to 32-bit indices (for ARM), there is no need to protect reads and writes to those indices. - Simplify the XON/XOFF logic quite a bit. Much cleaner now (both for AVR and ARM) - Prevent a race condition (edge case) that could happen when estimating the proper value for the stepper timer (by reading it) and writing the calculated value for the time to the next ISR by disabling interrupts in those critical and small sections of the code - The problem could lead to lost steps. - Fix dual endstops not properly homing bug (maybe). * Set position immediately when possible	2018-06-01 19:02:22 -05:00
Scott Lahteine	2deff0d9b9	Fix/Improve junction deviation - Respect axis max acceleration limits instead of forcing a fixed acceleration value. - The `junction_unit_vec` ensures proper handling of entry and exit speeds even when the axes involved have different limits.	2018-05-31 20:09:53 -05:00
Scott Lahteine	6885ca606c	Drop JUNCTION_ACCELERATION from example configs	2018-05-31 20:07:28 -05:00
Chris Pepper	d87257f63c	[2.0.x][LPC176x] Fix PIO build flags (#10909 ) Don't build and link with different flags, the binary may not work.	2018-05-31 19:08:31 -05:00
Axel	ae322e0c54	[2.0.x] Add GTM32 Pro VB support (#10898 )	2018-05-31 00:11:38 -05:00
Scott Lahteine	d259070980	Clean up trailing spaces from vim, etc.	2018-05-31 00:09:41 -05:00
Scott Lahteine	21d812d502	Fix the Z un-hop on G11 Co-Authored-By: zarthcode <anthony.clay@zarthcode.com>	2018-05-29 23:41:36 -05:00
Scott Lahteine	d3c473002a	For SCARA probe Y offset is proximal/distal	2018-05-29 21:55:53 -05:00
Scott Lahteine	b90f54b0fc	Improve probe logging	2018-05-29 21:54:13 -05:00
Scott Lahteine	3f2a062a57	Fix M914 value range (-64...+63) Fix #10896	2018-05-29 12:02:15 -05:00
Scott Lahteine	b6cd8d9cc6	Set deltas to park on the left	2018-05-29 11:44:31 -05:00
Scott Lahteine	9713538427	HOTENDS for Switching Nozzle with Switching Extruder	2018-05-29 11:05:52 -05:00
Scott Lahteine	c68b7b3913	Update Fan 2 and E0 Auto Fan pins for Trigorilla	2018-05-28 21:11:12 -05:00
Scott Lahteine	cbcb284f4a	Allow libServo::attach to work on Teensy 3.5/3.6	2018-05-28 20:56:24 -05:00
Chris Pepper	f89f7c4a82	[2.0.x][LPC176x][Build] Force single precision constants, disable freestanding (#10892 )	2018-05-28 19:38:22 -05:00
Scott Lahteine	4299e5dc8b	Modify E-stepping macros for use in LINEAR_ADVANCE (#10885 )	2018-05-28 19:34:08 -05:00
Scott Lahteine	8f14ef855d	More concise commentary in planner.cpp	2018-05-28 19:25:18 -05:00
Scott Lahteine	6919e87656	Minor cleanup of multi-stepping logic	2018-05-28 17:44:33 -05:00
android444	16da5c62d0	Teensy 3.x fastio pullup (#10890 )	2018-05-28 16:25:12 -05:00
Scott Lahteine	853a9056ac	Long thermistor tables need special consideration	2018-05-28 06:28:34 -05:00
Scott Lahteine	a4f9c3373f	Tweak thermistor spacing	2018-05-28 03:44:32 -05:00
Scott Lahteine	9b9b62b218	delay(SERVO_DELAY) => safe_delay(servo_delay[servo_index])	2018-05-28 03:44:32 -05:00
Scott Lahteine	1ce97f1f6d	Faster (bisect) search in thermistor tables (#10883 )	2018-05-27 23:27:51 -05:00
Scott Lahteine	0ca9db7051	Correct HOTENDS for SWITCHING_EXTRUDER	2018-05-27 23:22:48 -05:00
Scott Lahteine	945139e328	Clean up some formatting	2018-05-27 17:58:40 -05:00
android444	9c235ef821	[HAL]Add support for ST7920 - Teensy 3.x (#10872 )	2018-05-27 03:36:57 -05:00
Eduardo José Tagle	7b9f0302d4	Fix Bresenham rounding errors, add link to article (#10871 )	2018-05-27 01:49:59 -05:00
Scott Lahteine	2566342979	Adjust some commentary	2018-05-27 00:10:25 -05:00
Scott Lahteine	1b200f3312	Sanity check SWITCHING_EXTRUDER with SINGLENOZZLE	2018-05-26 23:26:23 -05:00
Scott Lahteine	6775a16c97	Fix switching extruder stepping with LA	2018-05-26 19:07:01 -05:00
Scott Lahteine	2e139fe50f	Tweak configuration spacing	2018-05-26 18:33:51 -05:00
Scott Lahteine	931ab4ec40	Rename Junction Deviation options	2018-05-26 18:33:51 -05:00
Scott Lahteine	aaaf09bda2	BEZIER_JERK_CONTROL => S_CURVE_ACCELERATION	2018-05-26 18:33:51 -05:00
Scott Lahteine	cf7d5a642a	Fix manual moves for switching tools (#10868 )	2018-05-26 18:30:53 -05:00
Eduardo José Tagle	1da2c4f1c1	Text LCD display routine fix. Coauthored with @MagoKimbra (#10864 )	2018-05-26 18:13:33 -05:00
Bob-the-Kuhn	1c0ad8bbae	wrong type of exit method	2018-05-26 08:17:03 -05:00
Scott Lahteine	01d37e00af	Fix up stepper ISR with linear advance timing (#10853 ) Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-26 01:00:13 -05:00
Eduardo José Tagle	6f330f397e	[2.0.x] Buffer overflow and scroll fix, UTF8 cleanup (#10844 )	2018-05-25 23:32:37 -05:00
Bob Kuhn	235facd545	install AVRDUDE 5.10, faster disk find for LPC1768 (#10849 )	2018-05-25 20:26:48 -05:00
Scott Lahteine	645df23eb0	Fix warning with FASTER_GCODE_PARSER disabled	2018-05-25 06:45:42 -05:00
Scott Lahteine	d74e333c0f	Make sure FAN_ANIM_FRAMES is defined	2018-05-25 05:28:50 -05:00
Bob Kuhn	e2db509d58	[2.0.x] Update/Fix LPC1768 extra script upload_extra_script.py (#10843 ) * Use a different method to find the volume info in Windows	2018-05-25 04:31:18 -05:00
Scott Lahteine	7261f48872	Fix reset of endstops and move state	2018-05-24 19:33:36 -05:00
Scott Lahteine	50fa8e01c1	Minor optimization of axis_did_move bits	2018-05-24 19:08:07 -05:00
Scott Lahteine	a94506ada0	Fix K8400 Y min pos, M118 comment	2018-05-24 08:21:16 -05:00
Scott Lahteine	336a022529	Support Malyan LCD without SD	2018-05-24 05:01:18 -05:00
Scott Lahteine	f28e366b77	Followup for core endstops	2018-05-24 03:02:57 -05:00
Scott Lahteine	8b44745bc7	Clean up and consolidate SD-related code (#10831 )	2018-05-24 01:18:56 -05:00
Scott Lahteine	9644d56b42	Patches for core motion tests	2018-05-24 00:49:01 -05:00
Scott Lahteine	5f8591528e	Remove #pragmas that don't help c files	2018-05-23 23:47:16 -05:00
Scott Lahteine	230ae6a143	Default G30 to engage / disengage	2018-05-23 16:57:23 -05:00
Scott Lahteine	3e3789da85	Regression: Endstops Core compatibility (#10823 ) Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-23 03:45:25 -05:00
Scott Lahteine	c89649b46e	Suppress U8glib build warnings	2018-05-23 02:47:36 -05:00
Axel	bbd09a99f1	32 bit boards classification cleanup (#10818 ) - Ordering and match classification between `boards.h` and `pins.h` - Check `pins.h` environments	2018-05-22 21:20:24 -05:00
Scott Lahteine	ee333f6be2	Followup to endstops tweaks	2018-05-22 20:41:03 -05:00
Axel	d98bc71af7	Boards classification arrangement (#10814 ) STM32 ARM Cortex-M3 boards were listed as M4	2018-05-22 02:56:51 -05:00
Scott Lahteine	4b610b333e	Tweak G38 formatting	2018-05-22 01:56:03 -05:00
Scott Lahteine	d2647c1f19	Fix G1 behaviour after tool unpark Fix #10777 for 2.0.x Co-Authored-By: Ante Vukorepa <o.orcinus@gmail.com>	2018-05-22 00:53:00 -05:00
Scott Lahteine	3bb950c69a	Fix DEBUG_LEVELING_FEATURE for MBL As noted in #10777	2018-05-22 00:49:15 -05:00
Scott Lahteine	1af98519cd	Group and adjust LCD buttons code	2018-05-22 00:37:45 -05:00
Scott Lahteine	0c3773d724	Cleanup in stepper_indirection.h	2018-05-22 00:36:03 -05:00
Scott Lahteine	4118199ddd	Tweaks to core headers	2018-05-21 20:32:18 -05:00
Scott Lahteine	4b2f6e3b2b	[2.0.x] Add endstop noise filter (#10796 )	2018-05-21 15:51:38 -05:00
Scott Lahteine	65a004564c	Stepper::set_position needed for some applications	2018-05-21 15:21:33 -05:00
Scott Lahteine	435ecb6b67	Followup to stepper/planner refactor	2018-05-20 23:13:38 -05:00
Bob Kuhn	6dfbb39f83	[LPC1768] Add error-handling to upload script, update autobuild.py (#10802 )	2018-05-20 21:22:04 -05:00
Scott Lahteine	68d7fcec83	Simplify and fix Z fade height edit Fix #10761	2018-05-20 12:29:23 -05:00
Bob Kuhn	d557c84a71	[2.0.x] Error for FAST_PWM_FAN with 32 bit CPU (#10798 )	2018-05-20 11:37:55 -05:00
etagle	569df3fc0c	Fix interrupt-based endstop detection - Also implemented real endstop reading on interrupt.	2018-05-20 07:10:24 -05:00
etagle	a4af975873	Fix planner block optimization - Fixed the planner incorrectly avoiding optimization of the block following the active one. - Added extra conditions to terminate planner early and avoid redundant computations.	2018-05-20 07:10:24 -05:00
etagle	e0ca627033	Planner block HOLD flag Allows the Stepper ISR to wait until a given block is free for use. Allows Planner to plan the first move, which is split into two.	2018-05-20 06:23:58 -05:00
etagle	a11eb50a3e	Refactor and optimize Stepper/Planner Better encapsulation and considerably reduce stepper jitter	2018-05-20 06:23:58 -05:00
etagle	0566badcef	Add memory barrier, optimal interrupt on-off Disabling an ISR on ARM has 3 instructions of latency. A Memory barrier is REQUIRED to ensure proper and predictable disabling. Memory barriers are expensive, so avoid disabling if already disabled (See https://mcuoneclipse.com/2015/10/16/nvic-disabling-interrupts-on-arm-cortex-m-and-the-need-for-a-memory-barrier-instruction/)	2018-05-20 02:39:34 -05:00
Scott Lahteine	c2fb2f54a1	Use assembly for AVR ISR vectors Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-20 01:58:51 -05:00
Scott Lahteine	206014a957	Fix LPC176x timer functions Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-20 01:58:51 -05:00
Scott Lahteine	59f7861bcb	Move backtrace to the HAL folder (#10790 )	2018-05-20 01:33:21 -05:00
Scott Lahteine	228139eae6	Tweak some LCD comments	2018-05-19 21:00:08 -05:00
Scott Lahteine	7dc03ce721	Simplified fix for babystep pulse width Alternative to the apparently superfluous double delay	2018-05-19 21:00:08 -05:00
Scott Lahteine	65270d6a96	Fix LIN_ADVANCE + SWITCHING_EXTRUDER Followup to #10656	2018-05-19 18:32:00 -05:00
Bob Kuhn	62e2987488	add AT90USB support & add items to popup menu (#10779 )	2018-05-19 17:39:26 -05:00
Bob Kuhn	9ad42d6617	add delay between pulse edges (#10778 )	2018-05-19 17:12:16 -05:00
Scott Lahteine	83d42f33e1	Add HAS_HOTEND_OFFSET_Z conditional	2018-05-19 17:05:15 -05:00
GMagician	3c76bda2d8	Fix switching extruder `DONT_SWITCH` got lost along the way. Replace it with `DO_SWITCH_EXTRUDER` and adjust the code.	2018-05-19 17:05:15 -05:00
Scott Lahteine	c173a31060	Fix some compile warnings	2018-05-19 16:54:48 -05:00
Giuliano	e1d9046efc	[2.0.x] Temperature reading fix (#10774 )	2018-05-19 15:39:36 -05:00
Chris Pepper	9b64fdbc3a	[LPC176x] HAL: Add missing program space definition (#10776 )	2018-05-19 15:37:54 -05:00
Scott Lahteine	50270b53a0	Clear up some more compile warnings	2018-05-17 18:40:49 -05:00
etagle	06fd4d7b28	Improve NOMORE, NOLESS, and LIMIT macros	2018-05-17 18:23:14 -05:00
etagle	40d7e12827	Removing warnings from compilation	2018-05-17 18:04:22 -05:00
Scott Lahteine	0755fe8ba2	Add FAN_MAX_PWM to example configs	2018-05-15 21:18:47 -05:00
Jiri Jaburek	43ddb29f9e	Add FAN_MAX_PWM for M106-controlled fans	2018-05-15 21:18:46 -05:00
Scott Lahteine	0ea60d506a	Clear up LCD-related compile issues	2018-05-15 00:06:59 -05:00
Scott Lahteine	eb2eb72720	Modify UBL mesh_is_valid and use in leveling_is_valid (#10746 )	2018-05-14 22:36:03 -05:00
Scott Lahteine	b7dfc79988	Disable SERIAL_PORT_2 by default and sanity-check it (#10748 )	2018-05-14 21:38:24 -05:00
Scott Lahteine	3f6073e23a	Followup tweak to lcdprint_u8g.cpp	2018-05-14 14:42:11 -05:00
Scott Lahteine	fb608938f8	Prevent compilation of unused u8g-oriented code	2018-05-14 13:31:04 -05:00
Scott Lahteine	35258dd50b	Consistent heating status and status reset Fix #10699	2018-05-13 17:18:19 -05:00
Scott Lahteine	37b15fe4cf	Reorder HAL timer header items	2018-05-13 16:50:39 -05:00
Scott Lahteine	836b0bbeee	Fix MBL line_to_destination Fix #10708	2018-05-13 16:50:39 -05:00
Scott Lahteine	ba4c32eec5	Followup to _AXIS patch	2018-05-13 10:43:35 -05:00
Scott Lahteine	d9154ebdf6	Followup to math patch	2018-05-13 09:30:27 -05:00
Scott Lahteine	f07260c33f	Don't babystep on long click unless printing As pointed out in #10731	2018-05-13 08:11:35 -05:00
Scott Lahteine	883b0c9880	Convert custom maths to inlines (#10728 )	2018-05-13 08:10:08 -05:00
Scott Lahteine	08e36e264e	Apply _AXIS macro	2018-05-13 06:51:01 -05:00
Scott Lahteine	99ecdf59af	Smarter MIN, MAX, ABS macros Use macros that explicitly avoid double-evaluation and can be used for any datatype, replacing `min`, `max`, `abs`, `fabs`, `labs`, and `FABS`. Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-13 04:52:56 -05:00
Scott Lahteine	083ec9963e	Tweaks to heater / lcd conditions	2018-05-13 04:52:56 -05:00
etagle	9d98a62699	Followup to HAL optimizations and delays - Cleanups, fixes for Due HAL code. - TC_IER is write-only. Use TC_IMR to test ISR state.	2018-05-13 00:46:23 -05:00
Scott Lahteine	8f8c6a9bc4	Move get_axis_position_mm to Planner (#10718 )	2018-05-12 09:59:11 -05:00
Scott Lahteine	a1062eec5b	Better handling of DELAY_NS and DELAY_US (#10716 ) Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-12 08:34:04 -05:00
Scott Lahteine	f5aaa2d6c0	Fix some compiler warnings	2018-05-12 05:28:12 -05:00
Scott Lahteine	3614e6ce0f	Fix Switching Extruder with Linear Advance	2018-05-12 02:26:14 -05:00
Scott Lahteine	625035a9ce	Fix M301 access to lpq_len (#10714 ) Co-Authored-By: Zwaubel	2018-05-12 02:13:40 -05:00
etagle	1b225a2809	DUE: Emergency parser for the USB CDC	2018-05-12 02:12:11 -05:00
Scott Lahteine	306f0f2135	Move Stepper::synchronize to Planner (#10713 ) Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-12 01:38:02 -05:00
Scott Lahteine	f2e3c9896e	Fix compile warnings in backtrace Part of #10688 Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-11 23:38:29 -05:00
Scott Lahteine	acacee80a2	Add JUNCTION_ACCELERATION_FACTOR to configs Part of #10688 Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-11 23:13:27 -05:00
Giuliano	d99f1b2245	[2.0.x] EEPROM code cleanup (#10710 )	2018-05-11 18:06:04 -05:00
ManuelMcLure	8679f671ed	Remove dependency on PI. (#10701 )	2018-05-11 17:55:56 -05:00
Scott Lahteine	6671c064cd	Use arc moves for G26 if enabled (#10696 ) Co-Authored-By: ManuelMcLure <manuelmclure@users.noreply.github.com>	2018-05-11 02:15:14 -05:00
Scott Lahteine	325bbbc8c2	[2.0.x] Enable AD595 and AD8495 in concert (#10693 ) * Allow both AD595 and AD8495 in concert * General temperature code tweaks	2018-05-11 01:01:51 -05:00
Scott Lahteine	c43235dd39	Remove non-special comments	2018-05-11 00:36:04 -05:00
ManuelMcLure	613a3be167	Remove hidden dependencies on destination. Fixes #10686 . (#10691 )	2018-05-11 00:30:51 -05:00
Scott Lahteine	23a876b08d	Update a comment in motion.cpp	2018-05-10 15:03:37 -05:00
Scott Lahteine	439e0cdd0f	Patch up reverse_pass_kernel (and other planner code) (#10674 )	2018-05-10 01:30:55 -05:00
Scott Lahteine	fe5c308872	Correction to Printrboard SDSS pin (#10677 ) Co-Authored-By: Simon Swenson <simon-swenson-8351@users.noreply.github.com>	2018-05-10 01:28:55 -05:00
Scott Lahteine	265161ba30	Blink the value for unhomed/unknown axes (#10670 )	2018-05-10 01:19:20 -05:00
Scott Lahteine	57c2f8d2f6	Trailing whitespace cleanup	2018-05-10 00:17:10 -05:00
Scott Lahteine	b76344c080	More Trinamic cleanup	2018-05-10 00:12:10 -05:00
Scott Lahteine	473c6d3a91	Drop extra RIGIDBOT_PANEL from D6 config	2018-05-09 18:02:07 -05:00
Giuliano	44f3a6dc3b	[2.0.x] Add missing axes to M911, M912 (#10668 )	2018-05-09 17:58:11 -05:00
Scott Lahteine	722aba77f3	Fix LIN_ADVANCE + SWITCHING_EXTRUDER stepper directions (#10656 )	2018-05-09 14:36:09 -05:00
Scott Lahteine	a225d2e99e	Fix compilation with UBL and Arc/Bézier Fix #10660	2018-05-09 00:40:37 -05:00
Scott Lahteine	6d9ec1852a	Fix compilation of say_units Fixes #10663	2018-05-09 00:30:29 -05:00
Scott Lahteine	19f189b4e5	Add UBL support for G2/G3 and G5 (#10648 )	2018-05-08 11:10:45 -05:00
Scott Lahteine	4c663b0216	Add JUNCTION_DEVIATION to example configs	2018-05-08 10:08:54 -05:00
Scott Lahteine	4d4bf7897d	Junction Deviation jerk limiting option	2018-05-08 10:08:54 -05:00
Scott Lahteine	0436e16fb2	Apply shorthand Assembler macros	2018-05-08 10:08:54 -05:00
Scott Lahteine	d1b619be52	Standardize some hexadecimals	2018-05-08 09:19:18 -05:00
Scott Lahteine	ec05408453	Add 3-frame fan animation to bitmaps (#10654 )	2018-05-08 09:06:01 -05:00
Scott Lahteine	55f1f8446b	Show correct current units in M503	2018-05-08 06:29:53 -05:00
Giuliano	4e16e699c1	Fix sanity checks for dual axes (#10633 )	2018-05-07 03:34:26 -05:00
Scott Lahteine	a1fab8336e	Fix abort of SD printing	2018-05-07 02:52:26 -05:00
Scott Lahteine	e978e6e782	[2.0.x] Arrange LCD options by type (#10630 )	2018-05-06 19:16:55 -05:00
Scott Lahteine	8c5bc77fb9	Fix the sanity-check for config versions	2018-05-06 09:37:00 -05:00
Scott Lahteine	1f11b0f612	Fully init planner sync block	2018-05-06 08:16:54 -05:00
Scott Lahteine	f30241bda5	Merge pull request #10614 from thinkyhead/bf2_synced_planner_set_position [2.0.x] Improve sync of planner / stepper position, asynchronous G92	2018-05-06 03:10:43 -05:00
Scott Lahteine	840ff60952	Bring some configs up to date	2018-05-06 02:42:27 -05:00
Phr3d13	71cd681473	Add Geeetech i3 Pro C / W examples (#10626 ) Added base example configs for Geeetech's Pro C and Pro W machines.	2018-05-06 02:07:54 -05:00
Scott Lahteine	62e7a9c671	Fix up fwretract handling	2018-05-06 01:24:14 -05:00
Scott Lahteine	bfe223e120	Adjust usage of stepper.synchronize	2018-05-06 01:24:14 -05:00
Scott Lahteine	af1950a63e	Improve sync of stepper positions	2018-05-06 01:24:14 -05:00
Scott Lahteine	0c23792344	Apply int32_t to stepper	2018-05-05 18:21:03 -05:00
Roxy-3D	c2c02bdc67	Change Max7219 coordinates to traditional (X,Y)	2018-05-05 16:08:54 -05:00
Scott Lahteine	b337698f96	Additional patch for no heated bed	2018-05-04 00:15:37 -05:00
Scott Lahteine	76da6cc544	Fix Ender 2 build volume	2018-05-02 19:03:29 -05:00
Scott Lahteine	81b632c255	Additional temp-oriented improvements	2018-05-02 08:43:22 -05:00
nightdemonx	e911635fb1	Add thermocouple with AD8495 support	2018-05-02 08:43:16 -05:00
Scott Lahteine	00e86f1c2d	Add Velleman RGB-LED strip support to K8400	2018-05-02 08:10:48 -05:00
Bob-the-Kuhn	410b023b50	[2.0.x] Add Viki support to RAMPS_FD_V1 (DUE) (#10598 )	2018-05-02 07:54:06 -05:00
Scott Lahteine	b7e938a9fb	LCD_BED_LEVELING enables a sub-menu for ABL	2018-05-01 07:13:56 -05:00
Scott Lahteine	a90d99c27c	Rename float32 => float52, etc.	2018-05-01 07:08:47 -05:00
Scott Lahteine	d7b699ec34	Fewer includes of vector_3.h	2018-05-01 07:05:18 -05:00
thisiskeithb	9312636ee4	Ender-3 config files (#10585 )	2018-05-01 06:44:50 -05:00
Scott Lahteine	05fca752d6	Clean up autostart handling	2018-05-01 01:35:57 -05:00
Scott Lahteine	c87b0e21be	Add units to probe speed comments	2018-04-30 23:50:28 -05:00
Scott Lahteine	2c1205d8b1	Improve debug of homing move feedrate	2018-04-30 23:49:51 -05:00
Scott Lahteine	c8e4b7c8a6	Fix XY homing move away rate	2018-04-30 23:49:07 -05:00
Scott Lahteine	05c33833e7	[2.0.x] Add NO_LCD_MENUS option (#10582 )	2018-04-30 21:16:31 -05:00
Scott Lahteine	524cc392f4	Fix sd_status comparison Co-Authored-By: perkmeister <perkmeister@users.noreply.github.com>	2018-04-30 21:09:50 -05:00
MagoKimbra	1f92b9a4ed	Fix do_probe_move with fr_mm_s (#10576 )	2018-04-30 16:28:20 -05:00
Scott Lahteine	a73cece360	Fix utility.cpp for DEBUG_LEVELING_FEATURE As mentioned in https://github.com/MarlinFirmware/Marlin/issues/9429#issuecomment-385305597 Co-Authored-By: Jack Bradach <jack@bradach.net>	2018-04-30 03:40:50 -05:00
Scott Lahteine	4dfc011d86	Fix homing with probe feedrates	2018-04-30 03:35:07 -05:00
Scott Lahteine	59fda986ea	Allow Z_AFTER_PROBING to be 0	2018-04-30 03:25:47 -05:00
Scott Lahteine	63e4afc910	Do rounding in integer (instead of FIXFLOAT) Co-Authored-By: Bob-the-Kuhn <bob-the-kuhn@users.noreply.github.com>	2018-04-29 19:33:26 -05:00
Scott Lahteine	616651ff23	Add sanity check for LED_CONTROL_MENU Addressing #10569	2018-04-29 18:34:57 -05:00
Scott Lahteine	9e0d99c0c6	Round all floats in string conversion functions (#10566 )	2018-04-29 00:51:36 -05:00
Scott Lahteine	3f68203324	Modify FastIO error message	2018-04-28 20:27:36 -05:00
Scott Lahteine	1dab44213a	Fix the TMC26X initializer CS pin argument From #10531 Co-Authored-By: chriscg9 <chriscg9@users.noreply.github.com>	2018-04-28 12:02:45 -05:00
Scott Lahteine	cd08f01bb4	Fix M421 comment in gcode.h	2018-04-28 11:16:52 -05:00
Scott Lahteine	7546f87949	Allow a home bump of 0 when homing Z with probe	2018-04-28 10:26:31 -05:00
Scott Lahteine	d470a1234f	Fix ENABLED/DISABLED for DUE …and any other platforms where `false`/`true` are defined as `0x0`/`0x1`. This fixes issue #10550.	2018-04-28 10:12:37 -05:00
Scott Lahteine	683dc24e0f	When homing with Z probe bump at Z_PROBE_SPEED_SLOW	2018-04-28 08:50:23 -05:00
Scott Lahteine	8db7fb226a	Fix M420 C for UBL	2018-04-28 08:14:20 -05:00
Scott Lahteine	ed8d2bc225	Clean up some endstop inverting examples	2018-04-28 08:04:43 -05:00
Scott Lahteine	c7305be4d2	Fix some endstop inverting settings	2018-04-28 08:04:33 -05:00
Bob-the-Kuhn	f973ff49ae	[2.0.x] MKS SBASE - Separate SD_DETECT for LCD and on-board SD cards (#10557 )	2018-04-28 07:24:07 -05:00
Scott Lahteine	5ac226aa93	Further cleanup of inline delays	2018-04-27 19:22:22 -05:00
Marcio Teixeira	724e9f56c8	Removed "const" to match parser. (#10548 )	2018-04-27 17:48:52 -05:00
Giuliano	2e1939e85c	[2.0.x] report error on unsupported commands (#10553 ) Raise an error when an unknown/unsupported G/M command is requires. This will address #10546	2018-04-27 17:40:27 -05:00
Scott Lahteine	a474a7e675	Correct AVR_ATmega328_FAMILY macro …as with #10540 Co-Authored-By: per1234 <per1234@users.noreply.github.com>	2018-04-27 03:13:46 -05:00
Scott Lahteine	f790b4bc0a	Reorganize some conditionals	2018-04-27 02:23:11 -05:00
Scott Lahteine	a51ba6e3f6	Fix ABL grid bounds test for Delta/SCARA Addressing #10538	2018-04-27 02:23:10 -05:00
Scott Lahteine	df6bc812b5	Fix disable of Z_HOMING_SENSITIVITY for HOMING_Z_WITH_PROBE As pointed out in #10532	2018-04-27 02:23:10 -05:00
Scott Lahteine	63e0b36f8b	Fix G29_RECOVER_COMMANDS typo	2018-04-27 02:23:10 -05:00
Scott Lahteine	f83361a814	Apply const to tmc_sensorless_homing	2018-04-27 02:23:10 -05:00
Scott Lahteine	212e52e485	Basic delay for Max7219 on ARM	2018-04-27 00:41:29 -05:00
Scott Lahteine	7b6e742436	Wrap delay macros in do{}while(0)	2018-04-26 18:18:23 -05:00
Karl Andersson	58ca3be1ec	delayMicroseconds() cannot be called in critical section (#10535 ) on the STM32 platform	2018-04-26 14:31:01 -05:00
Bob-the-Kuhn	00dfaae8df	[2.0.x] Platformio - automate build & environment selection (#10503 )	2018-04-26 02:42:06 -05:00
Scott Lahteine	299c4fed42	Undefine PIDTEMPBED without a bed heater	2018-04-26 01:30:10 -05:00
Scott Lahteine	456cf971af	HAL FastIO cleanup and fixes	2018-04-26 00:40:16 -05:00
J.C. Nelson	5b5e322356	Set Interrupt Priorities and Grouping for STM32F103. (#10517 )	2018-04-26 00:21:16 -05:00
Scott Lahteine	0e450df6a2	MKS OLED support for RUMBA Based on #10519 Co-Authored-By: Alex <alex18881@users.noreply.github.com>	2018-04-25 23:00:44 -05:00
Scott Lahteine	2578996631	[2.0.x] Emergency parser for multiple serial ports (#10524 )	2018-04-25 20:58:00 -05:00
Scott Lahteine	8cc31d1b2e	Cleanup to emergency parser Followup to #10516	2018-04-25 06:54:37 -05:00
Chris Pepper	2242b98248	[LPC176x] Emergency Parser Feature (#10516 )	2018-04-25 06:44:26 -05:00
Scott Lahteine	eef0248a1c	Add M420 C to adjust the whole mesh (#10522 )	2018-04-25 06:43:45 -05:00
Eduardo José Tagle	c1e5ebbc1e	[2.0.x] AVR: Atomic bit set and clear of upper pin ports without critical section (#10502 ) * AVR: Atomic bit set and clear The critical section can be dropped, saving 3 cycles per access. Also simplified pin toggling for all ports.	2018-04-24 13:45:43 -05:00
Marcio Teixeira	02a711c4d6	[2.0.x] Fix crash upon repeated calls to process_subcommands_now_P (#10509 )	2018-04-24 13:44:22 -05:00
Scott Lahteine	a3ce8a3fcd	Add sanity checks for EMERGENCY_PARSER	2018-04-24 09:24:26 -05:00
Scott Lahteine	f06c3c38b9	Fix M0_M1 with no LCD	2018-04-24 09:22:05 -05:00
Scott Lahteine	c82dd5129f	Revert potentially-not-redundant UBL test Response to #10435	2018-04-24 08:04:13 -05:00
Scott Lahteine	9789c1c719	Fix current_temperature_chamber compile error Fix #10505	2018-04-24 07:55:58 -05:00
Eduardo José Tagle	0c428a66d9	Proper AVR preemptive interrupt handling (#10496 ) Also simplify logic on all ARM-based interrupts. Now, it is REQUIRED to properly configure interrupt priority. USART should have highest priority, followed by Stepper, and then all others.	2018-04-23 22:05:07 -05:00
Scott Lahteine	f423e54f77	Strip trailing spaces	2018-04-23 18:00:43 -05:00
Scott Lahteine	8177c4334e	Merge pull request #10498 from xC0000005/MalyanLCDFix Fix overridden Malyan LCD functions	2018-04-23 17:22:43 -05:00
Scott Lahteine	cb46cb8480	Add HAS_HEATED_BED conditional (#10495 )	2018-04-23 17:13:01 -05:00
Marcio Teixeira	10a25f733e	Add SENSORLESS_HOMING to Archim 2.0 (#10500 )	2018-04-23 17:11:33 -05:00
xC0000005	24d23ce49b	Fix function definitions for Malyan LCD	2018-04-23 16:56:37 -05:00
Alexey Shvetsov	ad58b626a3	Fix pin mappings for Viki2 on Azteeg X5 GT (#10487 )	2018-04-22 18:41:30 -05:00
Scott Lahteine	9e07df5c1b	Extra options for LEVEL_BED_CORNERS (#10483 )	2018-04-22 02:50:48 -05:00
Scott Lahteine	1c3d49afe0	Fix G28 with Z_AFTER_PROBING Fix #10476	2018-04-22 01:23:26 -05:00
Scott Lahteine	b6747c742a	Cleanup AZTEEG_X5_GT pins for VIKI What should the SD detect and SDSS pins be? Followup soon on #8138	2018-04-22 01:19:43 -05:00
Scott Lahteine	023385ca59	Merge pull request #10479 from thinkyhead/bf2_creality_power_loss_resume [2.0.x] Creality3D Power-Loss Recovery	2018-04-22 00:17:44 -05:00
Scott Lahteine	3396671011	[2.0.x] Reset LCD status to fallbacks (#10470 ) * Remove obsolete strings * Tweak some static consts * Reset LCD status to fallbacks	2018-04-22 00:16:30 -05:00
Scott Lahteine	d58450c82a	Russian language update Co-Authored-By: anton-piliugin <34044202+anton-piliugin@users.noreply.github.com>	2018-04-22 00:14:20 -05:00
Scott Lahteine	11ab017dd0	Creality3D Power-Loss Recovery	2018-04-21 21:56:50 -05:00
Scott Lahteine	594d6f9efd	Add POWER_LOSS_RECOVERY to example configs	2018-04-21 19:40:46 -05:00
Scott Lahteine	7dcd0a1cff	Add R parameter to G28 to specify pre-raise	2018-04-21 19:07:48 -05:00
Scott Lahteine	2f4b4d6076	Add Stopwatch::resume method	2018-04-21 19:06:05 -05:00
Scott Lahteine	a90cbc6339	[2.0.x] Wait for bed heaters between probing (#10472 )	2018-04-21 15:43:21 -05:00
Scott Lahteine	a0dac95d25	Merge pull request #10460 from thinkyhead/bf2_trigorilla_14 [2.0.x] Split TRIGORILLA into 1.3 and 1.4	2018-04-20 18:25:40 -05:00
Scott Lahteine	f0cbf3d432	Correction to sanity check	2018-04-20 18:16:27 -05:00
Scott Lahteine	d8a8eec6ea	Add THERMAL_PROTECTION capability Based on #10465 In response to `M115` the firmware reports if Thermal Protection is enabled (1) or not (0). This information can be used by software such as OctoPrint (more precisely the Printer Safety Check plugin) to warn users when Thermal Protection is not enabled in the firmware. Co-Authored-By: andrivet <sebastien@advtools.com>	2018-04-20 16:50:50 -05:00
Scott Lahteine	186d71b361	Complete CREALITY_ENDER revert	2018-04-20 16:17:25 -05:00
Scott Lahteine	11ef432476	Match Makefile to boards.h	2018-04-20 16:13:50 -05:00
Scott Lahteine	2be5fe5ddf	Split TRIGORILLA into 1.3 and 1.4	2018-04-20 16:12:25 -05:00
Scott Lahteine	80e29492c6	TRIGORILLA => TRIGORILLA_13	2018-04-20 16:12:25 -05:00
Scott Lahteine	dea686cf55	Define short pin names in fastio for STM32 (#10461 )	2018-04-20 14:54:35 -05:00
Scott Lahteine	65a6a86d19	Don't report point 0 in MBL G29	2018-04-20 13:12:50 -05:00
Scott Lahteine	6faa93d787	Add G29_RETRY_AND_RECOVER to example configs	2018-04-19 19:45:53 -05:00
Marcio Teixeira	5cc7916e69	Add G29_RETRY_AND_RECOVER feature - Add an option to retry G29, optionally executing a G-code procedure after each failed probe.	2018-04-19 19:45:53 -05:00
Scott Lahteine	78ea4871f9	Fix up enqueue now functions …and apply to MALYAN_LCD.	2018-04-19 19:45:53 -05:00
Roxy-3D	23635c2b64	Update ubl_motion.cpp Restore necessary and needed loop termination logic.	2018-04-19 12:04:35 -05:00
Scott Lahteine	8ca3c43d73	Updated language_data spacing, headers	2018-04-19 06:16:16 -05:00
Scott Lahteine	184c077c58	Correct includes (u8g.h) and spelling	2018-04-19 06:16:16 -05:00
Yunhui Fu	627348b46c	move the TALL_FONT_CORRECTION to language files	2018-04-19 06:16:16 -05:00
Yunhui Fu	77bc653524	Use X windows 6x12 bitmap font to support western languages.	2018-04-19 06:16:15 -05:00
Yunhui Fu	d81649b365	Update language data for sk.	2018-04-19 06:15:19 -05:00
Yunhui Fu	41839746a2	Removed unused macros	2018-04-19 06:15:19 -05:00
Scott Lahteine	4f184ba5da	[2.0.x] Add BOARD_MKS_BASE_15 with digital micro-stepping (#10454 ) * Add BOARD_MKS_BASE_15 with digital micro-stepping * Rename MKS_13 to MKS_GEN_13	2018-04-18 22:58:43 -05:00
Scott Lahteine	ad6baa5c9d	Fix for UBL set_bed_leveling_enabled	2018-04-18 00:14:48 -05:00
Scott Lahteine	df2f24617b	Use 0 as the bed position (not Z_MIN_POS)	2018-04-17 20:32:56 -05:00
Karl Andersson	428c54f2ad	[2.0.x] HAL for STM32F4 (#10434 )	2018-04-17 17:33:29 -05:00
Chris Pepper	744bcaee61	[2.0.x] Fix problems compiling with Arduino IDE (#10441 ) * Fix problems compiling u8glib utf8 support on Arduino * Change header in auto-generated font data * Change include in font gen scripts	2018-04-17 17:28:55 -05:00
GMagician	20772492aa	Fix compile warnings in AVR fastio.h (#10440 )	2018-04-17 17:26:57 -05:00
Scott Lahteine	f57a008c58	Merge pull request #10443 from thinkyhead/bf2_fix_and_improve [2.0.x] Improve UBL mesh report, M420 V T, M421 N, and…	2018-04-17 16:59:31 -05:00
Scott Lahteine	89b1580587	Fix compile error in tmc_status	2018-04-17 16:13:28 -05:00
Scott Lahteine	52c024e260	M221 with no parameters report flow	2018-04-17 16:06:25 -05:00
Scott Lahteine	01b01f6dfd	Tweak fwretract.retract debug, comments	2018-04-17 16:05:25 -05:00
Scott Lahteine	e4acd2c40e	One fewer compare in _lcd_move_xyz	2018-04-17 16:03:15 -05:00
Scott Lahteine	e05c825a05	Update position for UBL non-segmented activate/deactivate	2018-04-17 16:02:02 -05:00
Scott Lahteine	d462be6de6	Try FIXFLOAT rounding based on sign	2018-04-17 15:59:04 -05:00
Scott Lahteine	39c6f65ce7	Ignore LCD_BED_LEVELING with UBL	2018-04-17 15:57:44 -05:00
Scott Lahteine	0746aff595	Improve UBL mesh report. Add M420 T, M421 N	2018-04-17 15:52:56 -05:00
Scott Lahteine	3c826e5d05	Prevent delay when power is already on Fix #10410	2018-04-17 04:34:31 -05:00
Scott Lahteine	5a064d0e94	Fix bug in planner.set_position_mm	2018-04-16 04:19:58 -05:00
Scott Lahteine	0945674ba2	Use H0 by default with UBL_MESH_EDIT_MOVES_Z (#10428 )	2018-04-15 20:49:14 -05:00
Scott Lahteine	6cb83758d7	Fix Brazilian Portuguese language duplicates	2018-04-15 19:18:08 -05:00
Scott Lahteine	8f57e098de	Use end-of-line comments in planner.cpp	2018-04-15 19:02:30 -05:00
Scott Lahteine	6c7a17dba6	Abort SD printing more safely (#10407 ) Allow the current command to complete when aborting an SD print, otherwise some commands (G28, G29, etc.) will cause trouble.	2018-04-15 18:27:54 -05:00
Chris Pepper	c9aed73987	Fix missed includes from HAL macro patch (#10416 )	2018-04-15 18:27:34 -05:00
Scott Lahteine	9f8a96fb8a	Brazilian Portuguese update (#10409 )	2018-04-15 13:13:46 -05:00
Yunhui Fu	93273a4c9e	Fix u8g.h search path error (#10419 ) Support env MARLIN_LANGS for user select generated language, and update doc; update script to generate dogm_font_data_ISO10646_1.h automatically.	2018-04-15 13:12:02 -05:00
Scott Lahteine	584735c994	u8g.h => clib/u8g.h	2018-04-14 12:26:01 -05:00
Scott Lahteine	29dda871cb	Patch "upload_disk" to make python happy	2018-04-13 22:27:08 -05:00
Scott Lahteine	36b97bde9f	clear_block_buffer, kill_current_block in quick_stop	2018-04-13 22:04:53 -05:00
Scott Lahteine	99282a46e9	Make sure ABL (manual) starts close to the bed	2018-04-13 20:19:30 -05:00
Roxy-3D	21f13f9e57	Stow Probe at end of G29 J3	2018-04-13 14:46:47 -05:00
KangDroid	6c535081ec	[2.0.x] Add optional menu item to toggle software endstops (#10389 )	2018-04-13 00:24:09 -05:00
Scott Lahteine	3c5c6d478a	Prettify process_parsed_command	2018-04-13 00:23:11 -05:00
Scott Lahteine	0535ebc4d2	MESH_BED_LEVELING before PROBE_MANUALLY	2018-04-12 22:45:52 -05:00
Scott Lahteine	bb7064cc30	Tweak MBL move to bed code	2018-04-12 22:43:02 -05:00
Chris Pepper	cc6d41e1d3	Use a macro for HAL header redirection (#10380 )	2018-04-12 20:25:08 -05:00
Luc Van Daele	12785583d0	[2.0.x] G33 MIN_STEPS_PER_SEGMENT (#10386 )	2018-04-12 20:22:29 -05:00
Yunhui Fu	c96412a78f	[2.0.x] UTF-8 language translation support (#10213 )	2018-04-12 20:14:01 -05:00
Scott Lahteine	daa712455b	Make sure MBL starts close to the bed Fix #10390	2018-04-12 19:36:37 -05:00
Scott Lahteine	4c8751727a	Fix M118 parameter handling Fix #10388	2018-04-12 19:10:04 -05:00
Scott Lahteine	3bc179a16f	Compress/update comments ubl_motion …to fit more code on the screen and correct outdated commentary contrasting ABL.	2018-04-12 18:07:19 -05:00
Luc Van Daele	646aa20b43	Overhaul of G33 Delta Calibration (#8822 )	2018-04-11 21:14:48 -05:00
Luc Van Daele	ac2e0afb62	Low Point for delta calibration (#10363 )	2018-04-11 18:59:46 -05:00
Eduardo José Tagle	57a899a412	[2.0.x] 6th-order jerk-controlled motion planning in real-time for AVR (#10373 )	2018-04-11 18:13:42 -05:00
Bob-the-Kuhn	85014cd132	[2.0.x] LPC1768 - automatic selection of upload disk (#10374 )	2018-04-11 14:41:16 -05:00
Scott Lahteine	8669dba5e6	Merge pull request #10172 from noingwhat/2.0.x-Filament-Change-Acceleration [2.0.x] Filament load/unload add acceleration for Bowden	2018-04-11 00:39:11 -05:00
Scott Lahteine	472ab0cc24	Tweak RAMPS SDSS pins	2018-04-10 16:47:48 -05:00
LichtiMC	b94c8defee	Provide additional information about SMART-RAMPS board (#10353 )	2018-04-10 04:02:55 -05:00
Scott Lahteine	6f8e228880	Add RESET_PIN to pins_RAMPS_SMART.h	2018-04-10 03:34:20 -05:00
Sean	2d9b0a66fe	Add Filament Change accelerations	2018-04-09 23:57:27 -05:00
Scott Lahteine	71d3523254	Add Filament Change accelerations to example configs	2018-04-09 23:57:23 -05:00
Scott Lahteine	8b8ad14178	Add Z_PROBE_LOW_POINT to prevent damage	2018-04-09 17:23:03 -05:00
Scott Lahteine	82dafbba33	Add Z_PROBE_LOW_POINT to example configs	2018-04-09 01:55:05 -05:00
Roxy-3D	a731a723e8	Better i3-2020 Z_PROBE_OFFSET_FROM_EXTRUDER	2018-04-08 21:26:36 -05:00
Roxy-3D	26cc12eaa4	Resolve corruption of Max7219 Debug LED Matrix	2018-04-08 21:26:36 -05:00
Scott Lahteine	dca69efc11	Update Bed PID comments	2018-04-08 06:44:47 -05:00
Scott Lahteine	56486c5c0e	Apply const to manage_inactivity	2018-04-08 04:00:26 -05:00
Scott Lahteine	a6485456df	Fix LIGHTWEIGHT_UI with UBL See https://github.com/MarlinFirmware/Marlin/issues/10317#issuecomment-379100702	2018-04-08 03:24:22 -05:00
Scott Lahteine	e02fc4f1d6	Better RESTORE_LEVELING_AFTER_G28 sanity-check As suggested by @GMagician	2018-04-08 03:24:15 -05:00
Scott Lahteine	44a697ab04	Set STM32F1 TEMP_TIMER_FREQUENCY to 1K Responding to https://github.com/MarlinFirmware/Marlin/pull/8833#issuecomment-379426803	2018-04-08 01:08:05 -05:00
Scott Lahteine	cec6e19099	Add RepRapPro Huxley configuration Based on #10343 by @indazoo	2018-04-08 00:37:18 -05:00
Scott Lahteine	9ff4e9e1e6	Patch _IS_HW_SPI so defined() works	2018-04-07 23:29:00 -05:00
Scott Lahteine	cea398849e	Tweak to gcode_line_error/return	2018-04-07 21:25:49 -05:00
etagle	a29adde5c0	Implement BEZIER_JERK_CONTROL Enable 6th-order jerk-controlled motion planning in real-time. Only for 32bit MCUs. (AVR simply does not have enough processing power for this!)	2018-04-07 21:03:28 -05:00
Scott Lahteine	5932df7ea1	Add BEZIER_JERK_CONTROL to example configs	2018-04-07 21:03:22 -05:00
Lenbok	0e8242180d	Chamber temperature monitoring and auto fan control. This is an initial cut for feedback, updated for 2.0.x. Chamber temperature is currently reported along with hot end and bed temperatures to serial. The format is just like that used for hot end and bed temperatures, but using 'C' prefix. As there is no heater, target is always 0. Is this appropriate, is there a better way to report chamber temperatures? Chamber temperatures are not reported on the LCD in any way. When auto chamber fan is enabled, it currently just uses the same temperature threshold as the other auto controlled fans. As the chamber temperature is not connected to any heater, it doesn't undergo mintemp/maxtemp monitoring. This would need to change in the future if chamber heating became a feature.	2018-04-06 23:09:06 -05:00
Scott Lahteine	5b3bda1c16	Add Chamber Temp options to example configs	2018-04-06 23:09:06 -05:00
Bob-the-Kuhn	acda4ecb20	Fix DUE Trinamic SW/HW SPI sanity check (#10336 )	2018-04-06 22:22:30 -05:00
Bob-the-Kuhn	ab715c70d1	TMC SPI sanity-check and pins debugging (#10324 )	2018-04-06 20:24:54 -05:00
Scott Lahteine	4dc7e64789	Update Slovak language Based on #10313 by @rmoravcik	2018-04-06 20:23:20 -05:00
Scott Lahteine	0dccf9ea6a	Merge pull request #10318 from marcio-ao/pr-einsy-retro-tmc2130 [2.0.x] Fix TMC2130 DIAG1 active high, Einsy Retro	2018-04-06 20:18:34 -05:00
Marcio Teixeira	2efc072fdb	Clear progress bar on completion (#10333 ) Fix #10330	2018-04-06 20:13:19 -05:00
GMagician	6ce060cfe0	[2.0.x] Update language_it.h (#10322 ) Updated to #10296	2018-04-06 20:07:46 -05:00
Marcio Teixeira	9356cf648f	Added support for Einsy Retro http://reprap.org/wiki/EinsyRetro	2018-04-06 19:48:46 -05:00
Marcio Teixeira	75037493fa	Default active low for TMC2130 DIAG1 (#10294 ) - Added sanity check to inform users to set the endstop to inverting when using SENSORLESS_HOMING	2018-04-06 19:48:46 -05:00
Scott Lahteine	e8e60263c8	Scale feedrate (mm/s to deg/s) for SCARA	2018-04-06 19:47:48 -05:00
Scott Lahteine	051303ad42	Russian language updates From #10311 by @anton-piliugin	2018-04-05 00:46:46 -05:00
Sean	2fa0a73c2c	Implement filament change continuous purge	2018-04-04 20:57:51 -05:00
Scott Lahteine	d133ad61f3	Add continuous purge to example configs	2018-04-04 20:56:18 -05:00
Scott Lahteine	4b25543633	Backtrace formatting cleanup	2018-04-04 20:24:39 -05:00
Bob-the-Kuhn	902c885782	Switch to TMC2130 compatible hardware SPI & misc (#10299 )	2018-04-04 20:13:27 -05:00
Scott Lahteine	1c36606886	Fix MSG_HEATING_FAILED_LCD_BED macro evaluation	2018-04-04 19:01:22 -05:00
Scott Lahteine	fe91514395	MBL should add z_offset regardless of fade (#10308 )	2018-04-04 18:57:33 -05:00
Marcio Teixeira	8bc93c6f2b	Improve heating/cooling LCD messages (#10293 )	2018-04-04 18:29:27 -05:00
GMagician	21a47b50f4	Additional tool-change fixes (#10304 ) Followup to #10257	2018-04-04 17:06:33 -05:00
Scott Lahteine	f68b4265a6	Fix a probe pin definition	2018-04-02 21:52:34 -05:00
Yunhui Fu	a019eebdd6	support utf8 unicode for test language (#10220 )	2018-04-02 20:03:25 -05:00
Scott Lahteine	656219d867	Add configs for Creality CR-8	2018-04-02 20:02:04 -05:00
Karl Andersson	7cbbc2af7a	[2.0.x] Optional heater signal inversion (#10260 )	2018-04-02 19:37:41 -05:00
Marcio Teixeira	4d1a61335c	[2.0.x] Fixed Makefile for Marlin 2.0 (#10255 ) (#10281 ) * Fixed Makefile for Marlin 2.0 (#10255) - Makefile now supports the new Marlin 2.0 directory hierarchy. - RELOC_WORKAROUND is now automatically enabled based on avr-gcc version. * Makefile support for U8glib and TMC2130Stepper - Updated paths for oliver's U8glib 1.19.1 - Added option for teemuatlut's TMC2130Stepper 2.2.1	2018-04-02 19:36:27 -05:00
Scott Lahteine	241996d5d6	Merge pull request #10257 from thinkyhead/bf2_tool_change_debug	2018-04-02 19:33:45 -05:00
Scott Lahteine	4c79dc1093	Fix a Serial+EEPROM compile error Fixes #10278	2018-04-02 03:11:20 -05:00
Scott Lahteine	93305a2d5e	Fix some spellings	2018-04-02 03:03:37 -05:00
Scott Lahteine	adcb87f0db	Z Endstop Servo => Z Probe Servo	2018-04-01 23:54:21 -05:00
Scott Lahteine	4f0eafce8f	Add more AVR boards to Makefile	2018-04-01 18:22:06 -05:00
Scott Lahteine	4a23069de9	Fix Ender 4 / CR-8 compilation - Assign 243 (like EFB) as Ender-4/CR-8 board ID - Add to `Makefile` - Add to `pins.h`	2018-04-01 18:22:06 -05:00
Scott Lahteine	02f0f95d40	Handle disabled HYBRID_THRESHOLD in EEPROM (#10275 )	2018-04-01 16:58:37 -05:00
Scott Lahteine	9ec2c03c5b	Fix likely error in retract/recover Addressing #10200	2018-03-31 23:01:13 -05:00
Scott Lahteine	49f384a2ab	Note about MKS_MINI_12864 in sanitycheck	2018-03-31 22:52:23 -05:00
Scott Lahteine	2672120a97	Do a small raise for all move-back	2018-03-31 22:43:05 -05:00
Scott Lahteine	5acccbacc1	Simplified leveling-based tool change	2018-03-31 22:43:05 -05:00
Scott Lahteine	1a75165f35	For set_z_fade_height use set_bed_leveling_enabled	2018-03-31 22:43:05 -05:00
Scott Lahteine	d1734a089a	Split up tool_change for some setups	2018-03-31 22:43:05 -05:00
Scott Lahteine	a9f94f260a	Some RADDS pin updates	2018-03-31 22:15:24 -05:00
Scott Lahteine	31df43212c	Use lcd_printPGM_utf in more places Fix #10256	2018-03-31 20:49:20 -05:00
Scott Lahteine	7d8a46519f	Output ABC for delta stepper counts	2018-03-31 20:13:32 -05:00
Scott Lahteine	6098efcc59	Use float62 for LCD edit of Z Fade	2018-03-31 20:03:09 -05:00
Scott Lahteine	f6d13e2295	Allow Z_SAFE_HOMING sanity checks to handle floats	2018-03-31 19:01:56 -05:00
Scott Lahteine	889fd5f71f	Backtrace minor cleanup	2018-03-31 18:59:36 -05:00
Scott Lahteine	53f0c7522a	Symmetrical FWRETRACT Z Hop Do the Z lift normally before setting Z back to its prior value. But do the Z lower using spoofing. This should produce proper symmetrical movement.	2018-03-30 15:54:01 -05:00
Scott Lahteine	ac7e97f4fe	Change order of inactive stepper disable/enable This ensures that steppers that share an enable pin will only be disabled for a miniscule time.	2018-03-30 15:07:38 -05:00
Scott Lahteine	55e9b85ad6	Clear the "Wait for user" message set by M0/M1 See https://github.com/MarlinFirmware/Marlin/issues/10246#issuecomment-377146936	2018-03-29 18:38:12 -05:00
Scott Lahteine	b6a55f0891	Temporary workaround for tool-change compile error Pending a more complete solution to tool-change Z deviation.	2018-03-29 17:55:57 -05:00
Scott Lahteine	b852781eba	Fix BLTOUCH compile error Followup to #10250	2018-03-29 17:55:57 -05:00
AnHardt	c1f58a238d	No delay in sensorless quick homing (#10254 )	2018-03-29 16:10:20 -05:00
Scott Lahteine	1be955e52a	Alert users about low Z jerk values	2018-03-28 23:08:33 -05:00
Scott Lahteine	9e4c037cef	Wait before turning off PRINTER_EVENT_LEDS at print end (#10248 )	2018-03-28 22:59:28 -05:00
Scott Lahteine	8b7381b626	Clear sensorless homing in home_delta after first move-to-top	2018-03-28 22:01:42 -05:00
Scott Lahteine	dbe2b6f7b0	Do moves towards endstops differently in do_homing_move	2018-03-28 22:01:42 -05:00
Scott Lahteine	d573a2cada	Fix pins_RAMPS.h for 32-bit platforms Followup to `436e5b7`	2018-03-28 22:01:20 -05:00
Scott Lahteine	f04be05a14	"G28 Z Forbidden" => "Home XY first" Some languages will need to be updated for proper phrasing	2018-03-28 21:51:15 -05:00
Scott Lahteine	a97624dd81	Allow pinsDebug "Analog in" long int	2018-03-28 20:40:28 -05:00
Scott Lahteine	7b8bb2519e	Fix gcode_line_error call Followup to `3007eee`	2018-03-28 20:29:41 -05:00
Scott Lahteine	aa20b3ef7c	Fix linear/3-point manual leveling buffer overrun Fixes #10137	2018-03-28 18:41:22 -05:00
Alexey Shvetsov	cbdc78ec0f	Fix STM32 compilation with PlatformIO (#10245 )	2018-03-28 18:35:20 -04:00
Scott Lahteine	9d2ea5d64b	Undo German changes See `941e9bd329 (commitcomment-28262166)`	2018-03-28 17:05:14 -05:00
Scott Lahteine	2bc7f416ee	Fix missing comma in tmc_sgt Fixes #10209	2018-03-28 17:05:14 -05:00
Scott Lahteine	38378cd0e8	M218 with DELTA needs planner.h Fix #10232	2018-03-28 17:05:14 -05:00
Scott Lahteine	3007eee22e	Require a checksum when writing to SD From #10204 by @adriancuzman	2018-03-28 17:05:13 -05:00
Bob-the-Kuhn	9656a82609	Fix G53/CNC_COORDINATE_SYSTEMS compilation, Travis testing (#10227 )	2018-03-28 14:14:39 -04:00
Eduardo José Tagle	749f19e502	[2.0.x] Move backtrace to a shared location (#10237 ) - And implement the `backtrace()` function call	2018-03-28 14:13:20 -04:00
xC0000005	7dc256432f	Restore STM32F1 series to working order. (#10229 ) The `_O2` attribute is no longer needed on the malyanlcd function, and the macros have broken timer numbers - reset this to a function to return the right device. Also fix the bit order cast in SPI.	2018-03-28 14:07:52 -04:00
Rob Power	d1f14202a9	[2.0.x] NANODLP_Z_SYNC requires linear axes (#10240 )	2018-03-28 14:03:34 -04:00
Scott Lahteine	b287560258	Fix say_M603	2018-03-28 12:54:58 -05:00
Scott Lahteine	436e5b7ea3	Apply spacing in pins files	2018-03-28 12:52:08 -05:00
Scott Lahteine	4d533b9baa	Update bq Hephestos 2 probe offset From #10234 by @thopiekar	2018-03-27 21:05:03 -05:00
Bob-the-Kuhn	78df07ac71	Merge pull request #10221 from ejtagle/bugfix-2.0.x [2.0.x] DUE: Several fixes to the backtracker	2018-03-27 03:26:10 -05:00
etagle	8934a2c49b	Added some missing Thumb instructions to the traceback follower, so now it is able to traceback through switch() statements	2018-03-27 04:30:38 -03:00
etagle	328edea03a	Several fixes to the backtracer. Tested ant it works	2018-03-26 03:42:54 -03:00
Scott Lahteine	aa6dacbbdf	German update Based on #10216	2018-03-25 15:21:13 -04:00
Yunhui Fu	8322a79bb9	update the UTF-8 C strings for Chinsee languages, for Simplified and Traditional Chinese (#10211 )	2018-03-25 12:37:54 -04:00
ejtagle	9a24c0ae3f	Tons of fixes to the backtracker code, and also added an extra backtracker that does not require unwind tables to work and it is used if unwind tables are absent	2018-03-25 00:52:04 -03:00
Scott Lahteine	a891af2f7a	Enforce minimum TMC2130 / TMC2208 libs	2018-03-24 15:57:22 -04:00
Bob-the-Kuhn	75b381cd28	Merge pull request #10203 from Bob-the-Kuhn/sanity-check-fix [2.0.x] Fix TMC sanity checks that always fail	2018-03-24 14:06:34 -05:00
Bob-the-Kuhn	433e984d1f	move comment to fix compile error	2018-03-24 13:44:54 -05:00
Bob-the-Kuhn	f7857ac8a8	Merge pull request #10185 from ejtagle/bugfix-2.0.x [2.0.x] DUE debugging: Solve WDT startup delay, add traceback & crash report uses programming port baud rate	2018-03-24 13:32:34 -05:00
Bob-the-Kuhn	b756a15aba	another needs to be deleted	2018-03-24 10:22:03 -05:00
Bob-the-Kuhn	50c81ebe0d	remove check that always fails	2018-03-24 09:36:50 -05:00
Scott Lahteine	3ac135cef3	Enforce minimum TMC2130 / TMC2208 libs	2018-03-23 18:05:23 -04:00
Bob-the-Kuhn	8870f9b1da	Fix M503 helper functions following TMC updates (#10197 )	2018-03-23 16:43:43 -05:00
Scott Lahteine	bb7236a750	Z correction on tool-change for all HAS_MESH (#10199 )	2018-03-23 13:12:00 -05:00
Bob-the-Kuhn	509227fd80	change to mode 0	2018-03-23 09:37:58 -05:00
etagle	c3b23974bd	Added detection of case when no unwind tables are available	2018-03-23 05:22:45 -03:00
Scott Lahteine	ea1a83ce41	Use pgm_read_ptr for tables of pointers	2018-03-23 02:16:35 -04:00
Scott Lahteine	9da0797e29	Fix EEPROM size of tmc_hybrid_threshold Followup to #10102	2018-03-23 02:08:35 -04:00
teemuatlut	daf643e1ce	[2.0.x] TMC: Match axis label order (#10188 )	2018-03-23 01:04:12 -05:00
Roxy-3D	1628a9e864	make data declarations consistent	2018-03-22 19:25:28 -05:00
etagle	b210bdf032	Now the Crash reporter uses the configured BAUDRATE to send the report through the Programming port. And also shows the traceback of functions as discussed. For that latest feature to work, you need to compile the project with -funwind-tables and -mpoke-function-name compiler flags	2018-03-22 03:34:03 -03:00
etagle	c5730cf711	As Bob-The-Khun suggested, resetting the USB peripheral solves the huge startup delays that happen when a WDT reset happens and we are connected through the native port	2018-03-22 03:31:25 -03:00
Scott Lahteine	1cb810ff1c	[2.0.x] Automatically reset stepper timeout (#10179 ) * Automatically reset stepper timeout in manage_inactivity Any code that adds moves to the planner can skip resetting the stepper timeout. We can let `idle` / `manage_inactivity` reset the timer whenever it detects any moves in the planner. * blocks_queued => has_blocks_queued	2018-03-21 19:30:06 -05:00
Eduardo José Tagle	97e8a6ebd9	Various fixes for DUE... (#10152 ) - Watchdog reset during SD Card initialization. - Move `DebugMonitor` to `DebugMonitor_Due.cpp`. - Since the watchdog is enabled on boot do extra resets during init. - Have `thermalManager` do watchdog reset before its ISR starts to prevent reset. - Ensure that timers are stopped before reprogramming them to address tone issues. - Improve SAM3XE reset when reflashed through the native port.	2018-03-21 19:04:45 -05:00
Roxy-3D	c3c264978f	correct truncated comment	2018-03-21 16:54:45 -05:00
Scott Lahteine	9fd1016bb1	Trust the bootloader to clear globals	2018-03-21 05:49:39 -05:00
Scott Lahteine	045ee28c50	Tweaks to M915	2018-03-21 05:15:25 -05:00
Scott Lahteine	987597532c	For MK2_MULTIPLEXER undef DISABLE_INACTIVE_EXTRUDER Fix #10098	2018-03-21 04:34:50 -05:00
Scott Lahteine	ff304d3767	Allow G53 to go back to native space	2018-03-21 01:38:25 -05:00
Scott Lahteine	bc45fb6b13	Tweak use of move_z_after_probing	2018-03-21 01:25:08 -05:00
Scott Lahteine	c352954882	Allow no raise after run_z_probe in probe_pt	2018-03-21 01:24:51 -05:00
Scott Lahteine	ae39fbd646	Also suppress keepalive with suspend_auto_report	2018-03-21 00:29:09 -05:00
Scott Lahteine	8dfaf1539e	Merge pull request #10102 from thinkyhead/bf2_eeprom_M913 [2.0.x] More complete Trinamic driver options	2018-03-20 23:14:19 -05:00
AnHardt	837ac2fdbd	[2.0.x] Fix_Autotune_THERMAL_PROTECTION_BED_off (#10166 ) - Fix Autotune Thermal Protection - Make 2 constants in autotune configurable	2018-03-20 16:48:36 -05:00
Bob-the-Kuhn	785dbfc72d	[2.0.x] FASTIO consistency (#10164 )	2018-03-20 16:24:50 -05:00
Bob-the-Kuhn	7308ef7809	Add conditional, give DUE SPI a unique name, fix compiler warnings (#10168 )	2018-03-20 15:53:21 -05:00
teemuatlut	b5b39af531	[2.0.x] TMC: Fix CURRENT_STEP_DOWN (#10170 )	2018-03-20 15:16:05 -05:00
Scott Lahteine	a5c6d3c7b8	Prevent null pointer crash in Endstops::update Thanks to Evgeny Kotsuba!	2018-03-20 04:21:18 -05:00
Scott Lahteine	a46bac3100	Add 'I' parameter to M906/M913/M914; 'T' to M906/M913	2018-03-19 22:05:16 -05:00
Scott Lahteine	cfc13ed7f3	Quiet M906/M913/M914 with axes. Patch for DISTINCT_E_FACTORS.	2018-03-19 22:05:16 -05:00
Scott Lahteine	c95450016b	Improve Trinamic support in the EEPROM	2018-03-19 22:05:16 -05:00
Scott Lahteine	48d7036874	Consolidate smart stepper driver initialization	2018-03-19 22:05:16 -05:00
Bob-the-Kuhn	53362b81cc	Tone fixes/changes (#10151 )	2018-03-19 04:48:06 -05:00
Scott Lahteine	dd2949922b	Consolidate 3-point leveling point options	2018-03-19 04:12:20 -05:00
Scott Lahteine	1d22609473	MIN_PROBE_EDGE replaces DELTA_PROBEABLE_RADIUS	2018-03-19 04:11:46 -05:00
Scott Lahteine	eaefc1e410	Add CorePQ support for BABYSTEPPING (#10155 )	2018-03-19 02:51:40 -05:00
Scott Lahteine	72281c4ff9	Turn power off in `kill` instead of setting PS_ON to input	2018-03-19 02:37:55 -05:00
Scott Lahteine	9d99360912	Fix matrix.debug output	2018-03-18 20:02:20 -05:00
Eduardo José Tagle	bbfbf90797	Fix for DUE - no host support on native USB if SD card not enabled (#10148 )	2018-03-18 19:49:51 -05:00
Scott Lahteine	772810fb24	Followup to PORTVAR patch	2018-03-18 19:23:58 -05:00
Scott Lahteine	978f342392	Reduce some tmc_util strings	2018-03-18 18:58:10 -05:00
Scott Lahteine	fbdc5ad962	Prevent lcd_update stack overflow on SD Card change	2018-03-18 18:58:10 -05:00
Scott Lahteine	c0d694d5d3	Squash UBL postscript comment	2018-03-18 18:58:10 -05:00
Scott Lahteine	93af8aa157	Fix home_delta for SENSORLESS_HOMING (#10145 )	2018-03-17 20:52:06 -05:00
Scott Lahteine	0543362b34	Don't init the tone timer if no BEEPER_PIN	2018-03-17 18:59:43 -05:00
Scott Lahteine	c6ff39cc14	Spacing cleanup	2018-03-17 16:49:08 -05:00
Scott Lahteine	9e9e29ddf8	Einsy: Regular endstops and BLTOUCH pins Based on #10131	2018-03-17 16:43:09 -05:00
Bob-the-Kuhn	c79b53d406	Merge pull request #10140 from Bob-the-Kuhn/DUE-full-speed [2.0.x] DUE - add full speed USB native port option	2018-03-17 13:41:45 -05:00
Bob-the-Kuhn	7f1afbfd60	can't type	2018-03-17 13:07:49 -05:00
Bob-the-Kuhn	23760d6c14	add full speed option	2018-03-17 12:56:44 -05:00
Bob-the-Kuhn	cbcd1ed42d	full speed	2018-03-17 02:57:18 -05:00
Scott Lahteine	6689884910	Easier override of ST7920 LCD timing	2018-03-17 02:40:24 -05:00
Scott Lahteine	d603e655d3	Fix SWITCHING_EXTRUDER manual movement	2018-03-16 03:22:56 -05:00
Scott Lahteine	5f77816772	Reduce size of "only one" sanity checks	2018-03-16 02:43:02 -05:00
Scott Lahteine	8922b56b58	Fix some spelingz	2018-03-16 01:25:41 -05:00
Scott Lahteine	a6feb58837	Delta support for multiple hotends with offsets (#10118 )	2018-03-16 00:46:42 -05:00
TheSFReader	2e43438e0c	Add C parameter to M27 to include the long filename In answer to #10001 Add an option to retrieve the currently open file name (long filename if possible).	2018-03-15 23:06:18 -05:00
Scott Lahteine	2168d6ac25	Allow NULL prepend in lsDive	2018-03-15 23:06:17 -05:00
Scott Lahteine	1e946d681d	Update Marlin for newest TMC libraries - TMC2130Stepper v2.2.0 - TMC2208Stepper v0.0.4	2018-03-15 22:23:31 -05:00
shaktee	63fc4a8521	BIBO2 default update and Cyclops config (#10108 )	2018-03-15 00:16:55 -05:00
etagle	404fc94705	DUE USB CDC: Do not send any character if no program on the PC is listening to them. This avoids Marlin waiting until the user actually opens a program that is able to consume the output of Marlin	2018-03-15 00:56:28 -03:00
Scott Lahteine	4aebe3d82e	Pretty up EEPROM port args	2018-03-14 22:44:25 -05:00
Scott Lahteine	51bf3c9503	Fix E direction for MK2_MULTIPLEXER with LIN_ADVANCE	2018-03-14 07:56:18 -05:00
teemuatlut	e6dcfa64b0	Cast SERIAL_CHAR to void in M122 (#10086 )	2018-03-14 07:09:06 -05:00
Marcio Teixeira	c24dbcbfe1	When STATUS_EXPIRE_SECONDS is 0, hide the position. (#10081 ) Some users may prefer to hide the position updates on the `LIGHTWEIGHT_UI` altogether. This leads to an even less cluttered display (it also saves on SPI traffic and one byte of RAM).	2018-03-14 02:44:30 -05:00
Studiodyne	e7a61de8af	[2.0] FWRetract Reset (Best way) (#10083 )	2018-03-14 01:35:30 -05:00
Scott Lahteine	f894209de2	Merge pull request #10093 from thinkyhead/bf2_trinamic_config [2.0.x] Clean up Trinamic config options, sanity check	2018-03-14 01:16:55 -05:00
Scott Lahteine	f1327fd5f9	Use lcd_goto_previous_menu_no_defer more	2018-03-14 00:50:15 -05:00
Scott Lahteine	e7570f3195	Improve TMC config organization, naming	2018-03-14 00:18:41 -05:00
Scott Lahteine	374ea49be9	Revert marlinAnalogInputToDigitalPin	2018-03-14 00:18:40 -05:00
Scott Lahteine	34f656decd	Add TMC2208 include in tmc_util.h	2018-03-14 00:18:40 -05:00
Scott Lahteine	07cf2cd9c4	Fix sensorless_homing_per_axis compile warning	2018-03-14 00:18:40 -05:00
Scott Lahteine	b858c638ad	Fix compiler warning for HAL_ANALOG_SELECT	2018-03-13 22:33:21 -05:00
Bob-the-Kuhn	c4467da53a	Merge pull request #10063 from ejtagle/bugfix-2.0.x [2.0.x] DUE - add programming capability to native port	2018-03-13 22:07:21 -05:00
Scott Lahteine	65ce0303f8	Fix MKS_12864_OLED blank issue Fixes #10071	2018-03-13 04:54:23 -05:00
Scott Lahteine	36452b4d6e	Fix filename HAL/DUE/servotimers.h => ServoTimers.h	2018-03-13 01:38:37 -05:00
Scott Lahteine	14c03cb6f4	[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10069 ) Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.	2018-03-13 01:15:22 -05:00
Scott Lahteine	5dec828abc	Add MKS_12864OLED to lcd_implementation_init Followup to #7914	2018-03-12 08:54:17 -05:00
Scott Lahteine	468f34104b	Patch do_blocking_move_to so 'destination' can be used	2018-03-12 08:16:17 -05:00
Scott Lahteine	5b45aab262	M218: report with no parameters	2018-03-12 08:14:35 -05:00
Scott Lahteine	18de11c1ea	Followup to auto-assign of dual axis CS pins	2018-03-12 07:19:56 -05:00
ejtagle	703c8ac0ef	Added Arduino-compatible kludge to the (ATMEL supplied) SAM3X USB stack we are now using so the Native port is also usable as a programming port on Arduino DUE and derived designs	2018-03-11 15:17:55 -03:00
Scott Lahteine	28f1276286	[2.0.x] Add Z_AFTER_PROBING option (#10058 ) Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.	2018-03-11 13:07:55 -05:00
Scott Lahteine	dd19e74476	Cleanup trailing whitespace @Bob-the-Kuhn — Please set your git options to remove trailing whitespace on commit.	2018-03-11 10:29:00 -05:00
Scott Lahteine	d0ac0151b6	Fix typo in ubl.prepare_segmented_line_to	2018-03-11 10:20:50 -05:00
Scott Lahteine	d385b9aac7	Auto-assign CS pins for X2, Y2, Z2 (#10057 ) Fixes #9211	2018-03-11 08:56:13 -05:00
Scott Lahteine	bae1cb859c	Patch flush_and_request_resend for 1.1.x parity	2018-03-11 07:36:00 -05:00
Scott Lahteine	51ebdf3b7d	Finish scroll_screen with menu direction/multiplier Fixes #10041	2018-03-11 04:41:12 -05:00
Bob-the-Kuhn	0d8c15c01f	restore PR 9661 files & V1 fix	2018-03-10 22:46:32 -06:00
Scott Lahteine	751785fc97	Followup to recent patches - `M666` is static, not inline - Disambiguate some stepper macros	2018-03-10 21:41:17 -06:00
Scott Lahteine	a0211f5d6c	Disambiguate else in stepper_indirection.h	2018-03-10 19:56:22 -06:00
Scott Lahteine	f003173752	Fixup M666 Followup to `d6df032`	2018-03-10 19:52:30 -06:00
Bob-the-Kuhn	bf59a4a6df	Revert "[2.0.x] DUE compatibility with shared SPI LCDs, USB mass storage, add pin defs & update examples\MakerParts\Configuration.h"	2018-03-10 17:22:20 -06:00
Sebastianv650	fd1d590726	[2.0.x] Silence M204 (#10037 ) `M204` is often used by slicers to set acceleration depending on perimeter, infill, etc., so Marlin's answers are flooding the serial windows. Silence `M204` according to the philosophy that setter commands should only send a reply if no parameter is given.	2018-03-10 07:16:55 -06:00
Scott Lahteine	f10c87b442	Update Endstops class for 1.1.x parity	2018-03-10 06:57:31 -06:00
Scott Lahteine	d6df0322c2	Update M666 for XYZ dual endstops	2018-03-10 06:57:31 -06:00
Scott Lahteine	fbc41c0e98	Update Marlin G-code summary	2018-03-10 06:57:31 -06:00
Scott Lahteine	239902f861	Fix E2END and add EEPROM to Smart RAMPS Reference #9983	2018-03-10 06:57:31 -06:00
Scott Lahteine	ddce486360	Merge pull request #10032 from thinkyhead/bf2_unknown_z_no_raise [2.0.x] Add UNKNOWN_Z_NO_RAISE to prevent Z grinding	2018-03-10 00:57:30 -06:00
Scott Lahteine	79e6d890d5	Add UNKNOWN_Z_NO_RAISE to example configs	2018-03-10 00:17:34 -06:00
Scott Lahteine	419d12ca1b	Add UNKNOWN_Z_NO_RAISE option With this option enabled, Z won't ever be raised until after `G28` has been completed, and it won't raise if Z becomes unknown. This is good for machines whose beds fall when Z is powered off.	2018-03-10 00:17:34 -06:00
Scott Lahteine	3b4c89e4b5	Move do_probe_raise closer to set_probe_deployed …and limit the raise to Z_MAX_POS	2018-03-10 00:17:34 -06:00
Scott Lahteine	2908e76151	Fix position_is_reachable_by_probe typo, add comment Fix #10029	2018-03-10 00:15:41 -06:00
Roxy-3D	26dc594ebb	prevent steppers from turning off during manual probes	2018-03-10 00:15:41 -06:00
Bob-the-Kuhn	d8eadf3796	fix ubl_G29.cpp Travis error	2018-03-09 23:59:30 -06:00
Bob-the-Kuhn	914bb80bde	removed SDSS init added device & comm drivers for shared SPI LCDs mistyped some updates in ultralcd_impl_DOGM.h remove unwanted changes in onfiguration.h still can't type Update HAL_LCD_class_defines.h include USB mass storage & misc	2018-03-09 23:06:11 -06:00
Scott Lahteine	6d9ea7e184	Fix position_is_reachable_by_probe typo, add comment Fix #10029	2018-03-09 21:12:11 -06:00
Roxy-3D	646dd5554c	prevent steppers from turning off during manual probes	2018-03-09 17:56:00 -07:00
Scott Lahteine	161ff9ff35	Fix UPDATE_ENDSTOP for CorePQ compatibility Fixes #9939	2018-03-09 08:54:48 -06:00
Scott Lahteine	49ca67202f	Patch configuration_store for extra serial port Fix #9948	2018-03-09 07:42:27 -06:00
Scott Lahteine	cc59ac4603	Fix _tmc_say_axis string address Fixes #10003	2018-03-09 06:10:11 -06:00
Scott Lahteine	16a8edc5f0	Add more delay before pulse off in Linear Advance ISR A capital idea from https://github.com/MarlinFirmware/Marlin/pull/9914#issuecomment-371614153	2018-03-09 05:26:29 -06:00
Scott Lahteine	dfd5d2fe75	Have position_is_reachable_by_probe use the whole bed (#10020 ) Previously `position_is_reachable_by_probe` was limited to the area specified for `G29` mesh leveling (even if leveling was disabled). This change will properly consider the entire bed area so that `G30` and other non-leveling probing may take place.	2018-03-09 03:37:30 -06:00
Bob-the-Kuhn	67a17446f2	Fix DUE incompatible enum type specification (#10017 )	2018-03-09 02:17:57 -06:00
Bob-the-Kuhn	3c58ca181c	[2.0.x] Correct step pulse width on LPC1768, DUE & Teensy35_36 (#10016 )	2018-03-09 02:11:28 -06:00
Scott Lahteine	e297748b22	Apply const, safe_delay in servo.*	2018-03-08 19:31:32 -06:00
Scott Lahteine	3c2bfa5e53	Update powersupply_on in power_on/off (#10015 ) Fix #10004	2018-03-08 18:56:47 -06:00
Scott Lahteine	42608b1925	Init old_red to 127 to ensure initial change Fix #10012	2018-03-08 18:28:33 -06:00
Scott Lahteine	317673fec3	Init watchdog last in setup()	2018-03-08 17:34:50 -06:00
Scott Lahteine	8d32fd997f	Wrap NORM_E_DIR/REV_E_DIR macros in do{}while(0)	2018-03-08 16:20:24 -06:00
Scott Lahteine	1913c37a91	Tweak to manual move eindex arg	2018-03-08 16:20:24 -06:00
Scott Lahteine	98d48fc731	Followup to HAL_timer_restrain Followup to #9985	2018-03-07 22:18:37 -06:00
Scott Lahteine	03e3011332	Fix compile error with MAX_MESSAGE_LENGTH Fix #9988	2018-03-07 21:57:01 -06:00
Bob-the-Kuhn	6b4a928145	2uS default step pulse (#9989 )	2018-03-07 21:11:01 -06:00
Scott Lahteine	ca577c1638	Fix up various spacing, comments, and typos	2018-03-07 21:09:08 -06:00
Scott Lahteine	d45f19d385	Remove Unicode from var name	2018-03-07 19:08:44 -06:00
Scott Lahteine	224688cc3b	Fix for unicode-ignorant gcc preprocessor	2018-03-07 18:34:07 -06:00
Chris Pepper	a1a88ebabc	HAL function to ensure min stepper interrupt interval (#9985 )	2018-03-07 17:53:25 -06:00
Scott Lahteine	be0e100fed	Fix sd subdirectory encoder position Followup to `7e386c7`	2018-03-07 16:54:19 -06:00
Bob-the-Kuhn	04dedc7ed8	always completely initialize display (#9981 )	2018-03-07 16:40:59 -06:00
Scott Lahteine	0149680f54	Fix compile error with char LCD	2018-03-07 16:25:37 -06:00
Scott Lahteine	9515e5aefb	Fix LA_active_extruder (static)	2018-03-07 05:49:20 -06:00
Scott Lahteine	e5ec793f7e	Wrap stepper indirection macros	2018-03-07 05:42:45 -06:00
Sebastianv650	5b85464791	Fix for LA (#9964 ) Missed in the original LA 1.5 PR: eISR has to use a local copy of current_block->use_advance_lead because it might still run wenn the last block has been set to NULL.	2018-03-07 05:33:13 -06:00
Scott Lahteine	7e386c7e98	Fix encoder position for sddirectory	2018-03-07 05:23:03 -06:00
Scott Lahteine	1d604be671	Suspend auto-report during UBL map output	2018-03-07 02:00:19 -06:00
Scott Lahteine	eb212ae073	Add suspend_auto_report flag to suppress auto-report	2018-03-07 01:57:09 -06:00
Scott Lahteine	ffbf63e6af	Add HAS_TEMP_SENSOR conditional	2018-03-07 01:53:50 -06:00
Scott Lahteine	94f5204629	Move AUTO_REPORT_SD_STATUS to SDSUPPORT block	2018-03-07 01:50:30 -06:00
Scott Lahteine	22a017a856	Rebuild SD file sort array on Stop SD Print (#9976 ) Thanks Chuck Hellebuyck.	2018-03-07 01:42:11 -06:00
Scott Lahteine	920d92aa46	Merge pull request #9974 from thinkyhead/bf2_tmc_util_progmem [2.0.x] Move tmc_util.* extended_axis_codes to PROGMEM	2018-03-07 00:16:50 -06:00
Scott Lahteine	b198b49d15	Followup to AUTO_REPORT_SD_STATUS Followup to #9832	2018-03-07 00:13:42 -06:00
Scott Lahteine	2057177184	Make enums into implicit char	2018-03-06 23:39:56 -06:00
Scott Lahteine	e28e3bb532	Move extended_axis_codes to PROGMEM	2018-03-06 22:21:24 -06:00
Scott Lahteine	ca0def766e	LIN_ADVANCE single stepper optimization	2018-03-06 19:26:54 -06:00
Scott Lahteine	8291ae34f2	Support duplication mode in LIN_ADVANCE	2018-03-06 19:12:23 -06:00
Scott Lahteine	b08ec22fe1	Show E0-E4 in monitor_tmc_driver output (#9969 ) Fix #9966	2018-03-06 19:01:07 -06:00
Marcio Teixeira	fd883c909a	Improvements to Lightweight ST7920 status screen. (#9952 ) - Show units on lightweight status screen. - Fixed progress bar so it works with M73	2018-03-06 01:49:36 -06:00
Scott Lahteine	0dd1c4458d	Put more code between pulse start and stop (#9959 )	2018-03-05 23:06:57 -06:00
Scott Lahteine	f9cafc4001	Fix menu highlight glitch, tweak scrolling code (#9957 )	2018-03-05 23:05:15 -06:00
Scott Lahteine	bf9fc8ac0e	M851 - report only without parameters	2018-03-05 02:11:50 -06:00
Scott Lahteine	eb867817b5	Prevent filament runout false positives (#9946 )	2018-03-05 01:49:30 -06:00
Scott Lahteine	36262a0479	Use static classes for job timers (#9938 )	2018-03-04 21:23:43 -06:00
Scott Lahteine	930720bbbb	Fix broken reverse planner (#9943 ) From #9914 by @Sebastianv650	2018-03-04 21:19:06 -06:00
Bob-the-Kuhn	025118da3e	Init print_job_timer in setup() instead of "early" (#9937 )	2018-03-04 16:23:44 -06:00
Scott Lahteine	beeed580b8	Implement digipots for MKS SBASE (#9927 ) Fix #9477	2018-03-04 15:14:47 -06:00
Scott Lahteine	07ae23fe14	No pulse delay on last e_steps in advance isr	2018-03-04 15:06:31 -06:00
Scott Lahteine	881529a401	Fix #9904 - toDigital should show 00-99 hours	2018-03-04 04:34:39 -06:00
Scott Lahteine	ed758de80d	tweak comment in stepper.cpp	2018-03-04 04:03:23 -06:00
Scott Lahteine	d1dc863962	autotemp_factor is not value_celsius_diff See https://github.com/MarlinFirmware/Marlin/issues/9852#issuecomment-369861822	2018-03-03 23:27:54 -06:00
Thomas Moore	f3914a432e	Clear retracted status when homing the Z axis	2018-03-03 23:18:40 -06:00
Scott Lahteine	6d7f4f84e2	Add board MKS_BASE_HEROIC (#9926 ) Followup to #9008 - Don't define micro-stepping pins for boards that lack them. - Allow setting of 128 microsteps with `M350`.	2018-03-03 23:14:52 -06:00
Scott Lahteine	649f375494	Fix: M112 calling kill from interrupt (#9923 ) Fix #9906	2018-03-03 23:14:01 -06:00
Scott Lahteine	c37b3f995a	Sanity-check some graphical LCD-only options	2018-03-03 20:31:59 -06:00
Scott Lahteine	a2a672449a	Updated boot screen description	2018-03-03 20:04:17 -06:00
Scott Lahteine	61620cbd15	Tweak M211	2018-03-02 02:20:40 -06:00
Scott Lahteine	6e08ddce6e	Correct M401 / M402 description	2018-03-01 19:10:36 -06:00
Studiodyne	23a576faf7	[2.0] Fix for FW retract (#9878 )	2018-03-01 15:15:40 -06:00
Ben Lye	461c8ef834	Fix DIGITAL_PIN_TO_ANALOG_PIN macro for Atmega1284p (#9881 )	2018-03-01 15:13:57 -06:00
Scott Lahteine	88b6a15b47	Update M900 verbiage	2018-03-01 15:11:31 -06:00
Ben Lye	e2df286444	Update pinsDebug.h (#9874 ) Fix display of analog input value.	2018-03-01 04:51:36 -06:00
Scott Lahteine	91db7930dc	Drop SCARA_FEEDRATE_SCALING The updated planner takes the length of the move, so this pre-calculation is no longer needed.	2018-03-01 04:30:41 -06:00
Bob-the-Kuhn	c1f4112bdc	[2.0.x] Add 1284 support & misc. bug fixes (#9864 )	2018-03-01 03:07:39 -06:00
Scott Lahteine	118899357d	Add sanity checks to Linear Advance 1.5 (#9873 )	2018-03-01 02:10:43 -06:00
Scott Lahteine	1746749361	Followup to #9868	2018-03-01 01:53:12 -06:00
Scott Lahteine	a446433c87	Fix SENSORLESS_HOMING for Core Kinematics (#9868 )	2018-03-01 01:37:31 -06:00
Scott Lahteine	2d1233b86c	Fix lcd_quick_feedback call for BTN_BACK	2018-02-28 20:24:11 -06:00
AnHardt	eb8b758226	Fix some mapper, charsize problems (#9866 )	2018-02-28 18:57:05 -06:00
Scott Lahteine	8bffb26c23	Fix manual move position display Manual moves now correctly include the workspace offset.	2018-02-28 17:33:23 -06:00
Scott Lahteine	8c03ce4d80	Fix Z safe homing sanity check for no probe Fix #9851	2018-02-28 05:28:35 -06:00
Scott Lahteine	c471389afb	Add Einsy Rambo pins (#9850 )	2018-02-28 04:16:12 -06:00
Zachary Hill	c22f8dd660	Get duration_t in printcounter.h for its clients (#9843 )	2018-02-28 04:15:29 -06:00
Scott Lahteine	24b9c1923f	ubl G29 tweaks	2018-02-28 03:40:06 -06:00
Scott Lahteine	bd0967ad87	Fix BTN_BACK Followup to #9835	2018-02-28 03:26:28 -06:00
Scott Lahteine	d9a98b5814	Russian language update From #9849	2018-02-28 03:07:39 -06:00
Ben Lye	461cb22069	Fix Zonestar / ADC keypad with RAMPS. (#9840 )	2018-02-28 00:07:50 -06:00
Scott Lahteine	35ec67885a	Add support for BACK button (RADDS) (#9835 )	2018-02-26 22:52:57 -06:00
Scott Lahteine	0bc4c216ac	Patch up pinsDebug pins	2018-02-26 19:32:48 -06:00
Scott Lahteine	cd7dc49527	Fix CR-10 status screen missing commas Fix #9660	2018-02-26 15:52:50 -06:00
geigerg	4817c78a65	Add files via upload (#9828 )	2018-02-26 15:44:01 -06:00
TheSFReader	eb079959fb	Report sd card progress [FR] #9751 (#9832 ) * SD Status auto-report feature Feature Request #9751	2018-02-26 15:38:27 -06:00
Scott Lahteine	7bdb98c946	Fix #9826 . Solution by @gloomyandy	2018-02-26 15:02:19 -06:00
Scott Lahteine	02474a321a	Fix SDSUPPORT (and indentation) Based on https://github.com/MarlinFirmware/Marlin/issues/8746#issuecomment-368471901 by @benlye	2018-02-26 14:40:40 -06:00
Scott Lahteine	cfdcf91df5	Fix compile error with initTone	2018-02-26 01:49:48 -06:00
Scott Lahteine	ae1a2ff16f	Pins parity with 1.1.x	2018-02-26 01:17:50 -06:00
Roxy-3D	306f44198e	Prevent serial buffer overrun in Pronterface 75ms might be excessive... But I know people are seeing problems with PronterFace as the client...	2018-02-25 23:50:44 -06:00
Scott Lahteine	966d9af98a	Mesh export in Bilinear + UBL M503	2018-02-25 23:25:39 -06:00
Scott Lahteine	8d5a77001e	EEPROM parity with 1.1.x	2018-02-25 23:03:09 -06:00
Scott Lahteine	2228dff3ea	ubl.h compile flags from 1.1.x	2018-02-25 23:03:08 -06:00
Sebastianv650	cb4cb86d80	Useless line removed (#9814 ) nextAdvanceISR is set in the next if structure in every possible situation, so it's useless to set it once more before.	2018-02-25 21:20:37 -06:00
Scott Lahteine	f2c0ed193d	Add tone support for Due (#9807 )	2018-02-25 10:48:14 -06:00
Scott Lahteine	0557ab5780	Fix CONFIG_ECHO_START bug In reference to #9633	2018-02-25 05:34:52 -06:00
Scott Lahteine	61688233c7	HAL style tweak	2018-02-25 05:00:44 -06:00
Scott Lahteine	19ba91f77a	Fix lcd_custom_bootscreen compiler warning	2018-02-25 04:38:17 -06:00
Scott Lahteine	f3dbe19669	Tweaks to HAL codestyle	2018-02-25 04:38:17 -06:00
Scott Lahteine	54c65fc3cb	Standardize LCD buzz defaults	2018-02-24 22:58:22 -06:00
Scott Lahteine	4953fb1c88	Standardize encoder defaults	2018-02-24 22:34:45 -06:00
Scott Lahteine	078627f805	[2.0.x] Creality Ender-4 configuration (#9803 ) * Move Creality Ender-2 configurations * Add Creality Ender-4 configurations	2018-02-24 22:11:11 -06:00
Scott Lahteine	5684beae90	Bring some configs up to speed	2018-02-24 21:56:27 -06:00
UtterlyD	813f9f3082	[bugfix_2.0.x] - LIN_ADVANCE V1.5 stepper.cpp (#9797 ) Removal of obsolete (i) from port of LIN_ADVANCE from V1.1.x to V2..0.x.	2018-02-24 16:37:23 -06:00
Scott Lahteine	3f89bbeab5	Drop a conditional only used once	2018-02-24 16:35:31 -06:00
Scott Lahteine	689bc99402	Correction to acceleration	2018-02-24 11:09:36 -06:00
Roxy-3D	92c8efdc96	Change Folger Tech i3-2020 defaults	2018-02-24 10:29:24 -06:00
Scott Lahteine	2024775e07	Spanish (UTF8) Language (#9786 ) From #7314 by @MrAmericanMike	2018-02-23 20:24:02 -06:00
Scott Lahteine	43ff15244d	Fix a progress bar condition	2018-02-23 19:43:44 -06:00
Scott Lahteine	b8485528b2	Prettify LCD_PROGRESS_BAR options	2018-02-23 19:19:57 -06:00
Zachary Hill	4d588b2d6a	Further fix of LCD_PROGRESS_BAR (#9783 )	2018-02-23 18:53:04 -06:00
Scott Lahteine	e0227f2110	Fix *_CS_PIN for RAMPS_FD Fix #9778	2018-02-23 14:29:57 -06:00
Scott Lahteine	e65a853c59	Fix LCD_PROGRESS_BAR Fix #9208	2018-02-23 14:05:10 -06:00
Scott Lahteine	07d7e8aa1b	Merge pull request #9775 from thinkyhead/bf2_g28_restore_leveling [2.0.x] Add RESTORE_LEVELING_AFTER_G28 option	2018-02-23 13:43:22 -06:00
Scott Lahteine	e749945317	Un-pause print on cancel (#9780 )	2018-02-23 13:42:15 -06:00
Scott Lahteine	17d984eab3	Add RESTORE_LEVELING_AFTER_G28 to example configs	2018-02-23 13:38:54 -06:00
Scott Lahteine	b2cf253a13	Add RESTORE_LEVELING_AFTER_G28 option	2018-02-23 13:38:54 -06:00
Scott Lahteine	65519263f4	Fix broken LEVEL_BED_CORNERS Fix #8805	2018-02-23 09:13:34 -06:00
Scott Lahteine	8f9262f3fe	Fix path to _Statusscreen.h	2018-02-23 09:06:06 -06:00
Scott Lahteine	007c56f453	Fix HAL_STM32F1/endstop_interrupts.h In response to https://github.com/MarlinFirmware/Marlin/issues/7076#issuecomment-367556982	2018-02-23 02:07:34 -06:00

... 12 13 14 15 16 ...

9487 commits