Scott Lahteine
3e78a01262
Merge pull request #7204 from thinkyhead/bf_update_ubl_lcd
...
UBL radar map corrections
2017-07-01 20:59:03 -05:00
Tom
1ff7d10c80
Add configuration for Infitary M508 (i3 clone)
...
Based on Infitary's own firmware settings.
2017-07-01 20:04:08 -05:00
Scott Lahteine
4cb45c10dd
Patch ubl lcd mesh map indentation
2017-07-01 19:47:52 -05:00
Scott Lahteine
abd6ba62b4
Some cleanups for ubl lcd mesh map
2017-07-01 19:47:49 -05:00
Scott Lahteine
f17bae1f70
Changes for ubl_lcd_map_control patch
2017-07-01 19:47:02 -05:00
Tannoo
8e0f3b7eba
UBL radar map corrections
2017-07-01 19:00:44 -05:00
Bob-the-Kuhn
fcceed5be6
intermittent Teensy & G26 compile problem
...
===============================================
also an issue with ubl_motion.cpp
2017-07-01 14:41:24 -05:00
Scott Lahteine
30b327d24c
Finish the solution for #7166
2017-06-29 15:17:39 -05:00
Scott Lahteine
6c97c5595c
Add a sanity check for DELTA_AUTO_CALIBRATION
2017-06-29 15:03:19 -05:00
Bob-the-Kuhn
e6e3132f79
make LETTTER_OFF return values that match param indices range
2017-06-29 09:01:58 -05:00
Bob-the-Kuhn
bfbf5f8200
correct value_bool() when FASTER_GCODE_PARSER is enabled
...
Also corrected compile issue when DEBUG_GCODE_PARSER and
AUTO_BED_LEVELING_UBL are both enabled.
2017-06-28 19:51:08 -05:00
Scott Lahteine
406ef69702
Move Anet A8 config to subfolder
2017-06-28 16:58:57 -05:00
Scott Lahteine
379926961c
Add Anet A6 config, edit Anet A8 config
2017-06-28 16:58:57 -05:00
Scott Lahteine
5b03f23fa2
Bring configurations up to date, fix some comments
2017-06-28 16:41:49 -05:00
Scott Lahteine
e3cedfa0ec
Fix a compiler warning
2017-06-28 16:41:46 -05:00
Scott Lahteine
bb0508b6cf
Fix comment in M115 code
2017-06-28 13:08:33 -05:00
Scott Lahteine
85777a56c6
Add A (action) and E (echo) parameters to M118
2017-06-28 02:07:59 -05:00
Scott Lahteine
d1e8d4cd9d
Merge pull request #7167 from thinkyhead/bf_20x4_lcd_update
...
UBL Map Cleanup and LCD display
2017-06-28 01:20:22 -05:00
Scott Lahteine
b492e0878d
Changes to reduce and simplify
2017-06-28 01:10:30 -05:00
Ben Lye
98d362c2da
Adding M118 command to send text to serial
...
Allows the user to send text to the serial console in order to
communicate with a host - sending debuging information or action
commands, for example. Text must begin with '//' and this is added if
it is not already present at the beginning of the string.
2017-06-28 00:55:20 -05:00
Tannoo
80abc872f3
Updated to better support the coming "radar"
2017-06-27 22:51:58 -05:00
Tannoo
e90cbf5c16
UBL Map Cleanup
2017-06-27 22:51:58 -05:00
Scott Lahteine
fc140c4962
Followup for I2C_POSITION_ENCODERS
2017-06-27 20:46:40 -05:00
Scott Lahteine
f4246dc8ff
Merge pull request #7165 from thinkyhead/bf_parser_shorthand
...
Use parser.seenval, add shorthand functions
2017-06-27 18:57:48 -05:00
Scott Lahteine
bd776df8c1
Optimize seen_axis by moving 'X' to index 24
2017-06-27 18:47:11 -05:00
Scott Lahteine
05449cf6ee
Add shorthand value accessors to gcode.h
2017-06-27 18:39:41 -05:00
Scott Lahteine
12f092c812
Cleanups to gcode.h, use seenval()
2017-06-27 17:57:00 -05:00
Scott Lahteine
941943c167
Apply const, spacing, etc.
2017-06-27 05:23:49 -05:00
Scott Lahteine
5b11b33854
Add support for Průša MK2 Multiplexer
2017-06-27 04:55:30 -05:00
Scott Lahteine
a4a587a897
Fix spelling of Průša
2017-06-27 04:46:46 -05:00
Scott Lahteine
ba1706a265
Fix spacing in gcode.cpp
...
Followup to #6940
2017-06-27 04:46:46 -05:00
Scott Lahteine
c2c8aafda2
Merge pull request #7157 from thinkyhead/bf_g33_f_parameter
...
G33 F and Height bug fix
2017-06-27 04:36:22 -05:00
Scott Lahteine
627afb29df
Merge pull request #7109 from tnw513/fix-italian
...
added missing italian translation
2017-06-27 04:12:30 -05:00
Scott Lahteine
f0f9fb7465
Remove line that does nothing
2017-06-27 04:08:50 -05:00
LVD-AC
99592c8458
Update G33: Add F, fix height bug
2017-06-27 04:02:02 -05:00
Ben Lye
31514f453a
Fix #ifdef AVR_AT90USB1286_FAMILY in pinsDebug
...
Can't compile with PINS_DEBUGING enabled on Atmega1284p because it tries
to enumerate pins 46 and 47 (which don't exist) because `#ifdef
AVR_AT90USB1286_FAMILY ` doesn't work as expected.
2017-06-27 08:04:40 +01:00
Scott Lahteine
134116b874
Merge pull request #7153 from thinkyhead/bf_czech_update
...
Updated Czech language
2017-06-26 17:34:15 -05:00
Petr Zahradník
e80958b631
CZ Translate BLTouch and UBL
...
Fixup length
2017-06-26 16:15:31 -05:00
Scott Lahteine
fe7e890b09
Fix issues with ADC_KEYPAD
...
Fixes #7150
2017-06-26 16:08:31 -05:00
dot-bob
a1632cfa0a
Added option 'H' to G29 P4.
...
- Added `H` to set a nozzle height adjustment to surface of the bed.
- Updated G29 P4 comments to reflect changes.
2017-06-25 17:14:08 -05:00
Scott Lahteine
e687782875
Merge pull request #7134 from thinkyhead/bf_skynet_a3_ready
...
Add Skynet/ANET A10 support
2017-06-25 14:35:22 -05:00
dot-bob
b3c36c98fd
Edit digipot currents via LCD, save to EEPROM
2017-06-25 01:02:36 -05:00
Scott Lahteine
3c7bfe798d
Various cleanups ahead of digipot save
2017-06-24 23:56:24 -05:00
Bob-the-Kuhn
9651d01e1a
Add Skynet/ANET A10 support
2017-06-24 19:07:03 -05:00
Scott Lahteine
eb314373bb
Config spacing & consistency, group custom LCDs
2017-06-24 14:33:40 -05:00
Scott Lahteine
6c45fa7dcc
Apply #elif in LCD conditionals
2017-06-24 13:56:33 -05:00
Scott Lahteine
afbc6e3e2f
Update DELTA/SCARA config comments
2017-06-24 12:47:17 -05:00
Paweł Stawicki
1e47c17b46
Fix: set digipot mcp4018 Vrefmax to 1.666V
2017-06-24 12:35:34 -05:00
Scott Lahteine
80a232419d
CNC workspace planes and 'P' argument for G2/G3
2017-06-23 14:53:03 -05:00
Scott Lahteine
5fb0d401eb
Formatting tweaks
2017-06-23 14:53:02 -05:00
Scott Lahteine
ed04d0b6be
Label DualXMode enums
2017-06-23 14:53:02 -05:00
Scott Lahteine
786cdea124
Ensure REPRAPWORLD_KEYPAD_MOVE_STEP is defined
2017-06-23 14:53:01 -05:00
Scott Lahteine
ee7163fd3a
Fix pinsDebug compile errors
2017-06-23 14:53:01 -05:00
Scott Lahteine
a9f8e518bf
Fix FILAMENT_WIDTH_SENSOR infinite loop issue
...
Addressing #6992 and #5851
2017-06-23 14:53:01 -05:00
Scott Lahteine
254a11b083
Merge pull request #7120 from thinkyhead/bf_sainsmart_link
...
Add link to F. Malpartida LiquidCrystal library
2017-06-22 14:04:23 -05:00
Scott Lahteine
aeb6d465a4
Merge pull request #7118 from thinkyhead/bf_french_update
...
French update
2017-06-22 13:10:07 -05:00
Bob-the-Kuhn
325f09ea6c
Add link to custom LiquidCrystal library by F. Malpartida
2017-06-22 13:07:08 -05:00
MagoKimbra
d26c8cc5c8
fix_planner_refresh_e_positioning ( #7103 )
...
* fix_planner_refresh_e_positioning
* Fix
2017-06-22 12:59:22 -05:00
Gege2B
c7f04fbcc7
French translation
2017-06-22 12:49:23 -05:00
Silvio Didonna
4171520729
added missing italian translation
2017-06-21 11:08:39 +02:00
Bob-the-Kuhn
41bfff14e2
Merge pull request #6991 from Bob-the-Kuhn/Mesh-with-babystepping
...
Mesh with BABYSTEP_ZPROBE_OFFSET: add sanity check
2017-06-20 16:36:22 -05:00
Scott Lahteine
424d0bae8b
Merge pull request #7100 from thinkyhead/bf_HAL_prepare
...
Apply maths macros and type changes ahead of HAL
2017-06-20 01:15:23 -05:00
Scott Lahteine
5c59ee4e93
Use current (raw) Z if omitted from G29 WXY or G29 WIJ.
2017-06-20 00:10:52 -05:00
Scott Lahteine
37bc0fce62
Make G29 compatible with M206 Z and G92 Z
...
Use the raw position for mesh measurement. Otherwise the `M206` and
`M92` Z offsets will get canceled out by bed leveling. The downside is
`G29` will not compensate for a poorly set small `M206` fudge value.
To elaborate on this issue, imagine you are probing with a Z home
offset of -0.1, meaning when Z homes, -0.1 is the current position,
implying the ideal bed zero for the nozzle is 0.1mm higher than the Z
endstop. Ordinarily when printing, Z would raise 0.1mm higher.
What happens when we probe is that all points are measured with that
-0.1 included. So when bed leveling is enabled the `M206 Z` offset gets
exactly canceled out by the bed readings.
2017-06-20 00:09:59 -05:00
Scott Lahteine
6c45d0fd81
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
Scott Lahteine
8a51e2960c
Improve the experience of editing steps_per_mm
2017-06-19 22:17:15 -05:00
Scott Lahteine
725d9d9a56
Fix and improve LCD value editing display
...
- Fix: When "100.0" changes to "99.0" the LCD shows "199.0"
- Use 2 rows if needed on character LCD, (allowing longer labels…
Germany, et. al.)
- Known issue: A certain length label combined with a certain value
drawing function could, for example, display 99.0 on 1 line, but 100.0
on two lines. Workaround would be to pass a nominal value size argument.
2017-06-19 22:17:15 -05:00
Scott Lahteine
499bb85a95
Clean up, put ubl menu itemization closer at hand
2017-06-19 22:17:14 -05:00
Tannoo
90f5f82926
Step-by-Step Menu addition
2017-06-19 20:15:11 -05:00
Scott Lahteine
0c616700f3
Merge pull request #7097 from thinkyhead/bf_dac_percents_fix
...
Convert DAC percent to uint8_t
2017-06-19 17:58:55 -05:00
Florian Heilmann
6dcf42f1a7
Add Z Fade Height to M420 output if it is enabled ( #7042 )
...
* Add Z Fade Height to M420 Output
Echo the z-fade height when M420 is called, if it is enabled.
* Fix Whitespace
* Fix Compiler complaint
* Missing semi-colon
2017-06-19 17:53:07 -05:00
Bob-the-Kuhn
a1c65fd3d5
convert DAC percent to uint8_t
...
=====================
add test to Travis
2017-06-19 17:46:41 -05:00
Scott Lahteine
907cafcbfd
Support for two switching extruders
2017-06-19 17:20:59 -05:00
Ross Allan
cfcd069501
Fix #5699 - LIN_ADVANCE freeze when ADV_RATE returns 0
2017-06-19 14:02:17 -05:00
Scott Lahteine
b8b7ef1902
Merge pull request #7090 from thinkyhead/bf_italian_refix
...
Fix Italian language mapper
2017-06-19 09:27:13 -05:00
Scott Lahteine
42f7f9e013
Merge pull request #7060 from bgort/i2cpefix
...
I2C Position Encoders Example Configs
2017-06-19 01:08:42 -05:00
Scott Lahteine
0b49bddec2
Fix Italian language mapper
2017-06-19 01:01:40 -05:00
Silvio Didonna
2e26a7c752
Added missing Italian translations
2017-06-18 23:37:48 -05:00
Scott Lahteine
4c3dc8bf07
Remove set_current_to_destination from resume_print
...
Addressing #7057
2017-06-18 23:01:13 -05:00
Scott Lahteine
4857a3ba48
Formatting and spelling
2017-06-18 23:01:12 -05:00
Thomas Moore
3d24c329af
M600 fixes
2017-06-18 23:00:56 -05:00
Bob-the-Kuhn
8fb30aaed6
warn user of an invalid combination
2017-06-17 15:04:47 -05:00
Bob-the-Kuhn
6cb9bb27fe
Move lcd_refresh_zprobe_zoffset definition
2017-06-16 21:46:33 -05:00
Scott Lahteine
d4270f15a9
Spacing tweak in setup()
2017-06-16 14:21:05 -05:00
Scott Lahteine
c61c0a9aeb
Fix status message missing "blink"
2017-06-16 14:18:19 -05:00
Scott Lahteine
062131554f
Followup to #7045
2017-06-16 14:18:19 -05:00
Jim Brown
3d043976f7
Add option to disallow filament change without homing first
2017-06-16 13:32:17 -05:00
Scott Lahteine
93da4e83f7
One more space on a short status message
2017-06-16 12:58:25 -05:00
Scott Lahteine
7c95f762f2
Show LCD bed options even without thermal protection
2017-06-15 15:29:56 -05:00
Scott Lahteine
92eb55f246
Reject generous donation of trailing whitespace
2017-06-15 15:25:24 -05:00
Scott Lahteine
428be27893
Formatting adjustments
2017-06-15 15:25:24 -05:00
Scott Lahteine
8d5a37fb3d
Support for a 5th stepper in stepper code
2017-06-15 15:25:23 -05:00
Scott Lahteine
7769a22064
Tweaks to temperature code
2017-06-15 15:25:23 -05:00
Scott Lahteine
d9da126776
Cleanups for UBL / ultralcd.cpp
2017-06-15 15:22:36 -05:00
Scott Lahteine
499d5c3b24
Fix scrolling lcd message for DOGM
2017-06-15 15:07:39 -05:00
Scott Lahteine
7164fd499e
Tweak to G33 P error
2017-06-15 14:43:40 -05:00
Scott Lahteine
c10d763d98
Simpler prepare move conditions
2017-06-15 14:43:40 -05:00
Scott Lahteine
4ebff8eaa5
Drop fastio timer cruft
2017-06-15 14:43:40 -05:00
Scott Lahteine
09bc34f4dc
Allow arbitrarily long retraction
2017-06-15 14:43:30 -05:00
Scott Lahteine
4414825e0d
Merge pull request #7038 from thinkyhead/bf_PCA9632
...
PCA9632 PWM color LED support
2017-06-15 14:41:24 -05:00
Bob-the-Kuhn
9dda022705
fix compile errors
...
================================
Changed to conditional compile for AT90USB issue
2017-06-15 13:18:14 -05:00
Bob-the-Kuhn
b3338ccb01
Merge pull request #6954 from Bob-the-Kuhn/Software-SPI-for-all-CPUs
...
SD card soft SPI - allow all CPU families to use it
2017-06-15 01:03:39 -05:00
Brian
40bb0cbf7a
example configurations, etc.
2017-06-14 18:04:28 -04:00
Jim Brown
26d20ebcfc
Don't allow filament change without homing first ( #7054 )
2017-06-13 17:11:37 -05:00
Roxy-3D
824f71d503
LCD Panel Interactive Mesh Editing ( #7045 )
...
Original Mesh Bed Leveling replacement put at top of UBL Menu Options to
help facilitate the removal of the Original Mesh Bed Leveling.
Radar display (and control) of the UBL Interactive Mesh Editing.
2017-06-12 18:26:49 -05:00
Scott Lahteine
445227c807
Fix missing LCD_STR_REFRESH
2017-06-12 01:28:52 -05:00
Scott Lahteine
699aa35df6
Code cleanup for G33
2017-06-12 01:25:40 -05:00
dot-bob
0bc66bf22c
PCA9632 PWM color LED support
...
Add support for the PCA9632 PWM color LED driver used on the Ultimaker 2 and Wanhao Duplicator 6.
2017-06-12 01:09:24 -05:00
Luc Van Daele
896dfa0577
G33 eccentric probe fixes ( #6850 )
...
* excentric probe config fix
* undo last commit
* eccentric probe fix
* oops
* !stow after each probe
* deploy/stow fix
* E parameter + bit of cleanup
* comment
* LCD menu fix
2017-06-12 01:07:19 -05:00
Thomas Moore
e47029199e
Remove ADVANCED_PAUSE_FEATURE requirement for PROBING_HEATERS_OFF ( #7000 )
...
* Remove ADVANCED_PAUSE_FEATURE requirement for PROBING_HEATERS_OFF
* Add HEATER_IDLE_HANDLER conditional
2017-06-12 00:22:31 -05:00
Scott Lahteine
8326c1c279
Merge pull request #7005 from Diederikvanderpant/bugfix-1.1.x
...
added shift register pins for reprapworld keypad v1.1
2017-06-11 23:12:11 -05:00
Scott Lahteine
07f8da36d2
CL-260 configs
2017-06-11 19:40:13 -05:00
Scott Lahteine
dce665a083
Merge pull request #7025 from magnuspub/patch-1
...
Mod in language_it.h
2017-06-11 19:09:46 -05:00
Scott Lahteine
7b09ab6bda
Merge pull request #7033 from Bob-the-Kuhn/pinsDebug-&-dac_mcp4728-fixes
...
Fix pinsDebug problem & add capability to display more than 70 pins
2017-06-11 19:09:09 -05:00
Scott Lahteine
5bdb4bbc5e
Merge pull request #7030 from thinkyhead/bf_circular_scroll
...
Circular scrolling of the status message
2017-06-11 19:07:38 -05:00
Federico
772275ab0c
Create language_it.h
2017-06-11 10:37:34 +02:00
Bob-the-Kuhn
11e28f389e
fix pinsDebug.h error, add capability to display more than 70 pins.
2017-06-10 22:01:15 -05:00
Scott Lahteine
21217d53df
Circular scrolling of the status message
2017-06-10 20:56:00 -05:00
Scott Lahteine
da8e946efb
Reduce size of heater state print code
2017-06-10 20:26:17 -05:00
Scott Lahteine
dde8bb7c8b
Fix extrude_min_temp compiler warning
2017-06-10 20:07:36 -05:00
Scott Lahteine
83263076dc
Merge pull request #7014 from fiveangle/fix_get-set_DrvPct_declarations
...
fix get/setDrvPct declarations
2017-06-10 19:06:50 -05:00
Scott Lahteine
57a51fd5db
Tweak some else clauses
2017-06-10 16:40:10 -05:00
Scott Lahteine
fc89de6d8b
Followup to German language update
2017-06-10 16:27:39 -05:00
Federico
92011e3d8c
Create language_it.h
2017-06-10 21:50:14 +02:00
Dave Johnson
7864b133a8
Fix get/setDrvPct declarations
2017-06-09 20:21:28 -07:00
Scott Lahteine
0b6b7c9c7e
Merge pull request #7013 from thinkyhead/bf_german_update
...
Update language_de.h
2017-06-09 21:41:19 -05:00
Scott Lahteine
f17a3c2474
Merge pull request #6889 from thinkyhead/bf_at90usb_mapping
...
Unify all AVR90USB pin mappings
2017-06-09 21:00:13 -05:00
Kai
5a72b6818e
update language_de.h
...
Following #6990 some more translations and some grammar fixes
2017-06-09 19:45:09 -05:00
Scott Lahteine
4cc5444144
Merge pull request #7008 from Bob-the-Kuhn/Z_MIN_PROBE_ENDSTOP-and-Z_MAX_PIN
...
Can't use "#define Z_MIN_PROBE_PIN Z_MAX_PIN" in configuration.h
2017-06-09 19:42:56 -05:00
Scott Lahteine
51bc50214a
Save 8 bytes of SRAM
2017-06-09 19:20:16 -05:00
Scott Lahteine
748bf32388
Unify AVR90USB: pinsDebug changes
2017-06-09 19:20:16 -05:00
Scott Lahteine
5426fc1735
Unify AVR90USB: Pins cleanup
2017-06-09 18:48:12 -05:00
Scott Lahteine
87d8223251
Unify AVR90USB: Pins remap to Arduino
2017-06-09 18:48:12 -05:00
Scott Lahteine
b378deaf89
Unify AVR90USB: fastio changes
2017-06-09 18:21:57 -05:00
Scott Lahteine
e94f79ccea
Patch some serial macros
2017-06-09 17:17:23 -05:00
Scott Lahteine
d91710e9aa
Followup for UBL translated strings
2017-06-09 16:59:26 -05:00
Scott Lahteine
761df686bd
Minor cleanup in gcode.h
2017-06-09 16:59:26 -05:00
Thomas Moore
897bc2ac1f
Updates for ensure_safe_temperature ( #6963 )
...
* Updates for ensure_safe_temperature
* M600 fixes
2017-06-09 15:19:08 -05:00
Bob-the-Kuhn
1c107b3949
delete problem line
2017-06-09 11:53:36 -05:00
Diederik van der Pant
5b270417ed
added shift register pins for reprapworld keypad v1.1
...
I recently upgraded my Marlin to V1.1.x and decided to publish my fix to make marlin compile properly when #define board megatronics 2 in combination with #define reprapworld keypad v1.1. It was previously described in the comments of a closed pull request. MarlinFirmware#472. All the buttons on the keypad are now operational.
2017-06-09 14:17:47 +02:00
bgort
2f55870edb
[New Feature] I2C position encoder support ( #6946 )
...
* [New Feature] I2C position encoder support
I plan to continue improving/cleaning this up, as there areas that need work.
* let the cleanups begin.
* progress
* more progress
* comments, rename files, etc.
* clean
* Cleanups per thinkyhead
* a few more cleanups
* cleanups, bugfixes, etc.
* remove unnecessary passes_test(), additional cleanups/optimizations
* cleanups
* misc.
* Fix up I2CPEM.init() and a few other things.
* organize, fix, rename, etc.
* more optimization
* a few more tweaks
2017-06-09 08:06:23 -04:00
Bob-the-Kuhn
28d72f48f1
change to DWORD
2017-06-08 16:15:02 -05:00
Bob-the-Kuhn
8d1d9040b6
add static
2017-06-08 14:59:21 -05:00
Bob-the-Kuhn
a17ffe1ece
Merge pull request #6985 from Kaibob2/patch-1
...
Fix for #6980 (case_light compile problem when EXTENDED_CAPABILITIES_REPORT is enabled)
2017-06-08 11:18:56 -05:00
Tannoo
731c8e6372
Translatable Strings for ubl_G29 ( #6990 )
2017-06-08 10:09:39 -05:00
Kai
abb6b8ad54
update language_de.h ( #6986 )
...
There was quite a lot to translate this time. I'm not absolutely confident with the whole UBL stuff and it's a PITA to translate. I don't use any kind of levelling myself as i just have a perfectly level cast aluminium plate as bed.
So maybe someone who really uses it might take a closer look at it after it's merged.
2017-06-08 10:04:52 -05:00
Kai
c2eff60d3f
Fix for #6980
...
Line 7830 prevented successfull compilation when #define CASE_LIGHT_ENABLE is uncommented
2017-06-08 09:19:04 +02:00
Scott Lahteine
1419126721
Merge pull request #6965 from thinkyhead/bf_save_more_sram
...
Use createChar_P to save SRAM in bootscreen
2017-06-07 17:34:19 -05:00
Scott Lahteine
a453be7357
Merge pull request #6973 from bgort/autoreportT
...
Enable AUTO_REPORT_TEMPERATURES by default
2017-06-07 17:33:40 -05:00
Scott Lahteine
1d615e0a67
Merge pull request #6976 from Tannoo/Leveling_in_About_Printer
...
Leveling type in About Printer
2017-06-07 17:26:21 -05:00
Scott Lahteine
707707d71a
Fix LCD status message padding
2017-06-07 16:07:38 -05:00
Scott Lahteine
e556ab1dff
Find three-point leveling points on Delta
2017-06-07 16:07:38 -05:00
Scott Lahteine
a27b08e6af
Various code style tweaks
2017-06-07 16:07:38 -05:00
Scott Lahteine
dac29e0f75
Cleaner failure of UBL without EEPROM
2017-06-07 16:07:38 -05:00
Scott Lahteine
9128d9ab45
Improve sanity checks with static_assert, organize
2017-06-07 16:07:38 -05:00
Scott Lahteine
6bb05c4543
Save 20b in smart_fill_mesh with PROGMEM
2017-06-07 16:07:38 -05:00
Scott Lahteine
b7dc4d9973
Save 92b PROGMEM, 14b SRAM with extruder auto fan
2017-06-07 16:07:38 -05:00
Scott Lahteine
c9e3caf928
Save lots of PROGMEM, ~20b SRAM with DIGIPOT_I2C
2017-06-07 16:07:38 -05:00
Scott Lahteine
4134a6b526
Save 88b PROGMEM, 48 bytes SRAM in settings.reset
2017-06-07 16:07:38 -05:00
Scott Lahteine
36cc03a9b4
Save 224b PROGMEM, 48b SRAM in get_homing_bump_feedrate
2017-06-07 16:07:38 -05:00
Scott Lahteine
2a41f0ff84
Save 28b PROGMEM in ultralcd.cpp (line_to_current)
2017-06-07 16:07:38 -05:00
Scott Lahteine
e6d10f6ddd
Spend 48b PROGMEM to save 16b SRAM
...
...by moving `homing_feedrate_mm_s` to PROGMEM.
2017-06-07 16:07:38 -05:00
Scott Lahteine
97e13a30ba
Save over 100 bytes SRAM in pin_is_protected
2017-06-07 16:07:38 -05:00
Scott Lahteine
45c74406cf
Recover 32 bytes of SRAM in Marlin bootscreen code
2017-06-07 16:07:38 -05:00
Scott Lahteine
e1c5a43247
Cleanup stepper current control config options
2017-06-07 16:07:38 -05:00
Scott Lahteine
efc198f952
Spacing, const, comments
2017-06-07 16:07:38 -05:00
Scott Lahteine
4406fba994
Fixes #6975
2017-06-07 11:14:30 -05:00
Scott Lahteine
d28f5d8a78
Fix: z_endstop_adj is never initialized
2017-06-07 10:29:56 -05:00
Scott Lahteine
5d5ff36446
Fix a compile error with _lcd_set_z_fade_height
2017-06-07 10:29:56 -05:00
Tannoo
b88957e0d4
Leveling type in About Printer
...
Show the Leveling system in use on the About Printer screen.
2017-06-07 06:28:33 -06:00
Brian
dd071a4a65
Enable AUTO_REPORT_TEMPERATURES by default
2017-06-07 02:52:35 -04:00
bgort
8db1197c9b
Enable extended capabilities report by default ( #6969 )
...
Ref #5139
2017-06-07 02:36:34 -04:00
bgort
82e662fc69
Remove requirement for LCD when UBL is used. ( #6971 )
...
* Remove requirement for LCD when UBL is used.
* fix previous oversights
* further refinement - error messages for P2 & P4
* require R on G26 when not using LCD; default to all points
2017-06-07 02:24:36 -04:00
Tannoo
2c2b991b59
UBL Manual Build Menu Option ( #6972 )
...
One click option to manually build UBL mesh.
2017-06-06 22:14:18 -05:00
Roxy-3D
0dd0033b33
Save up to 94 bytes of RAM on 20x4 LCD Display machines ( #6964 )
...
* Save up to 94 bytes of RAM on 20x4 LCD Display machines
Moved the custom screen characters out of RAM into Program Memory. With
SD-Card support and the Progress Bar enabled, this saves 94 bytes of RAM
memory.
This was tested using the example_configurations/FolgerTech-i3-2020
files. So a couple small changes to those files snuck into this Pull
Request.
Probably... We can find similar savings in the Graphics LCD code it we
comb through it. And if so... That is the place we really need to
save RAM memory!
* Tidy up white space and indentation
2017-06-05 17:02:00 -05:00
Bob-the-Kuhn
ba0bd33c38
Removed check for 2560 family
2017-06-04 22:16:27 -05:00
Scott Lahteine
04b07a6ecc
Unused var in Stepper
2017-06-04 17:25:16 -05:00
Scott Lahteine
eb8af486d2
Ensure safe temperature for M600
2017-06-04 17:25:16 -05:00
Scott Lahteine
bfe7fbe5c0
Maintain message scroll rate
2017-06-04 17:25:15 -05:00
Scott Lahteine
6411d65c48
Fix Morgan SCARA S2 calculation
2017-06-04 12:24:09 -05:00
Scott Lahteine
46752588b9
Merge pull request #6948 from Bob-the-Kuhn/redundant_temperature
...
fix redefinition errors for redundant_temperature
2017-06-04 12:16:09 -05:00
Scott Lahteine
5938dae200
Merge pull request #6950 from MagoKimbra/fix_g29_3_point
...
Fix G29 with 3 point
2017-06-04 12:15:44 -05:00
Scott Lahteine
c5e0f08e35
Merge pull request #6951 from fixoid/patch-4
...
Initializing extruder/nozzle servo when turning on the printer
2017-06-04 12:13:05 -05:00
Scott Lahteine
e4937b0285
Cleanup of spacing and formatting
2017-06-04 11:31:43 -05:00
fixoid
1aab9906e6
Initializing extruder/nozzle servo when when turning on the printer
2017-06-04 16:57:24 +03:00
MagoKimbra
663ff7f92a
Fix G29 with 3 point
2017-06-04 14:39:31 +02:00
oldmcg
9f295581f0
Ubl delta fixes and improvements ( #6941 )
...
* Change all direct changes of ubl.state.active to
set_bed_leveling_enabled() which handles apply/unapply
leveling to maintain current_position consistency.
Fix invalidation of UBL mesh to invalid unreachable
mesh points as well (delta corners).
Fix UBL_DELTA unapply_leveling logic and when
it gets applied, including fade_height changes.
Add optional M114 D for detailed position information,
disabled from compilation by default (M114_DETAIL).
* UBL_DELTA raw and inline kinematics
* UBL planner fall through fix
* consistent variable names
* Cleanup orphaned code and whitespace changes.
Use _O2.
* compile warnings cleanup
* Remove redundant #ifdef condition
2017-06-03 17:11:43 -05:00
Bob-the-Kuhn
c34d7a29a6
fix redefinition errors for redundant_temperature
...
Removing redundant_temperature from public section and leaving it in the
private section
2017-06-03 16:40:14 -05:00
Bob-the-Kuhn
6a5d3b580d
fix "hex_address not defined" when UBL is enabled
2017-06-03 13:19:55 -05:00
Scott Lahteine
789b2928a8
Tweak scrolling message code
2017-06-02 23:45:53 -05:00
Scott Lahteine
fc7d7f87b4
Init probe test pin with FastIO
2017-06-02 23:45:52 -05:00
Scott Lahteine
0282452cea
Make Parser::seen volatile
2017-06-02 23:45:52 -05:00
Scott Lahteine
9a305a467b
Patch LCD Contrast menu item
2017-06-02 23:45:52 -05:00
Scott Lahteine
90ccac4bcf
Clean up after recent commits
2017-06-02 23:45:52 -05:00
Bob-the-Kuhn
2130f10de8
allow space between parameter and value
2017-06-02 19:57:22 -05:00
Bob-the-Kuhn
ebda4663c3
for discusion
2017-06-02 19:42:43 -05:00
FATALHERMIT
911079104e
Support for ZRIB v2.0 Control Board
2017-06-02 12:05:46 -05:00
Scott Lahteine
65a0212866
Easier override of FILWIDTH_PIN
2017-06-02 12:05:46 -05:00
Scott Lahteine
147d9d76fc
Merge pull request #6928 from Bob-the-Kuhn/Fix-case-light-logic-on-Azteeg-X3-boards
...
Fix case light logic on Azteeg_X3 boards.
2017-06-01 20:14:15 -05:00
guntherv73
4288c4fb4f
Configurations for Malyan M150
2017-06-01 19:26:29 -05:00
Scott Lahteine
1919cb0d1e
Config cleanups
2017-06-01 19:26:16 -05:00
Bob-the-Kuhn
9a9bbfc57c
Fix case light logic on Azteeg_X3 boards.
2017-06-01 12:33:24 -05:00
Thomas Moore
a32f7b329c
Fix heater status display for advanced pause
2017-06-01 12:29:47 -05:00
Scott Lahteine
445865ea03
REPRAPWORLD_KEYPAD is NEWPANEL but not ULTIPANEL
2017-05-31 23:48:03 -05:00
Scott Lahteine
4296a8b74e
For status scrolling, pad a short message
2017-05-31 23:48:03 -05:00
Scott Lahteine
4a96433b7e
Simplify counting of printable characters
2017-05-31 23:45:41 -05:00
Scott Lahteine
8d69394ae1
Fix LCD printing of progmem strings
2017-05-31 23:36:57 -05:00
Scott Lahteine
c74d4dede6
Prevent illegal leveling combinations
...
Addressing issue #6901
2017-05-31 23:36:57 -05:00
Scott Lahteine
155aa62fb0
Merge pull request #6912 from thinkyhead/bf_better_pulse_delay
...
Account for dual XYZ in pulse delay cycles estimate
2017-05-31 22:21:47 -05:00
Scott Lahteine
a5fa586642
Preferred patch to gcode.h
2017-05-31 21:18:16 -05:00
Bob-the-Kuhn
1b41e1f645
another compile error
...
only seen if
#if ENABLED(TEMPERATURE_UNITS_SUPPORT)
...
#if
ENABLED(ULTIPANEL) && DISABLED(DISABLE_M503)
2017-05-31 13:59:49 -05:00
Bob-the-Kuhn
65bd4c8c94
Merge pull request #6797 from Bob-the-Kuhn/M355-case-lightimprovements-(1.1.x)
...
M355 case light improvements (replaces PR #5685 )
2017-05-31 13:33:59 -05:00
Bob-the-Kuhn
9657e7d3ee
copied file changes from PR #5685
...
==============================
Configuration_adv.h changes
==============================
add "live" LCD update
==============================
P & S version
==============================
final (hopefully) tested version
==============================
update M115 capabilities print
==============================
Menu changes portion of the requested changes
==============================
changed USEABLE_HARDWARE_PWM from a function to a series of macros
==============================
changes per review
2017-05-31 13:22:38 -05:00
Bob-the-Kuhn
8206bb9bb9
fix compile error
...
invalid conversion from 'const char*' to 'char*' [-fpermissive]
2017-05-31 13:17:01 -05:00
Scott Lahteine
df91346188
Account for dual XYZ in pulse delay cycles estimate
2017-05-31 12:23:28 -05:00
Scott Lahteine
7236109f2a
Patch M24 / M125 for delta
2017-05-30 23:07:29 -05:00
Scott Lahteine
be17033762
Fix case light menu toggle
2017-05-30 14:03:45 -05:00
Scott Lahteine
89b93058e3
Merge pull request #6887 from christianh17/PR-sanitycheck
...
enable DEACTIVATE_SERVOS_AFTER_MOVE with switching nozzle
2017-05-30 13:43:39 -05:00
Scott Lahteine
05b66234ae
Merge pull request #6895 from thinkyhead/bf_user_commands
...
Custom user commands menu
2017-05-30 13:40:50 -05:00
Scott Lahteine
84a0a77c59
Merge pull request #6852 from tcm0116/mixing_extruder_lin_advance
...
Generate error if MIXING_EXTRUDER and LIN_ADVANCE are both enabled
2017-05-30 13:37:51 -05:00
Scott Lahteine
266ae8912a
Formatting in _draw_heater_status
2017-05-30 03:32:16 -05:00
Scott Lahteine
6b9ca16f36
Patch lcd_print edge limit code
2017-05-30 03:32:15 -05:00
Tannoo
74d6dee920
User Command (Script) Menu
...
The menu (commands / scripts) is configurable in `Configuration_adv.h`.
- Added conditionals.
- Changed script handling.
- Slimmed and working!
- Added Status message.
- Returning to lcd status screen now!
- Example Configs Updated.
- Cleanups by @thinkyhead
2017-05-30 02:33:57 -05:00
Scott Lahteine
d9c8072037
Edit PROPORTIONAL_FONT_RATIO comment
2017-05-30 01:29:39 -05:00
Scott Lahteine
46b32e4548
Cleanup LCD interface, add lcd_reset_status
2017-05-29 22:16:13 -05:00
Scott Lahteine
ca99d67ede
Fix UBL "Info screen" menu items
2017-05-29 19:55:26 -05:00
Scott Lahteine
2c7a39bc0e
Fix LCD print aborted message
2017-05-29 19:52:01 -05:00
Scott Lahteine
0f1e8c195d
Draw on LCD after value has changed
2017-05-29 19:42:30 -05:00
Scott Lahteine
51587c4b43
Rename Feedrate to Velocity to match prior naming
2017-05-29 17:54:15 -05:00
Scott Lahteine
9677f3f2f5
Patch up LCD Bed Leveling menu
2017-05-29 17:51:11 -05:00
Scott Lahteine
fc2eaab7f3
Show home option in level bed menu
2017-05-29 17:51:10 -05:00
Scott Lahteine
c6a7adc293
Patch G29 A and Q arguments to bypass setup
2017-05-29 17:51:10 -05:00
Scott Lahteine
4cece2d72e
Use NAN for G29 W omitted parameters
2017-05-29 17:51:10 -05:00
Scott Lahteine
2d71569138
Fix spacing in JSON output
2017-05-29 17:51:10 -05:00
Scott Lahteine
b2d3c8aedd
Have G28 do a refresh of the display
2017-05-29 17:51:10 -05:00
Scott Lahteine
50ab9c2e04
General cleanup of spacing, comments
2017-05-29 15:34:14 -05:00
Scott Lahteine
f1e33afda4
Return to Bed Leveling menu when done
2017-05-29 15:31:02 -05:00
Scott Lahteine
78d8c598e1
Fix lcd_synchronize with message
2017-05-29 15:31:02 -05:00
Scott Lahteine
eb39d6e3e2
Don't draw progress bar until it has 1%
2017-05-29 15:31:01 -05:00
Scott Lahteine
194f8b2f55
Start at Z=0 in manual probing
2017-05-29 15:31:01 -05:00
Scott Lahteine
6f89db11f0
Allow lcd_setstatusPGM to reset the alert level
2017-05-29 15:31:00 -05:00
Scott Lahteine
3fe333143c
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
Scott Lahteine
d013bddfa8
Merge pull request #6876 from thinkyhead/bf_extend_leveling_menu
...
Extend the ABL/MBL Bed Leveling menu
2017-05-28 14:19:02 -05:00
Scott Lahteine
01e7e234c6
Add more options to the Bed Leveling menu
2017-05-28 14:04:28 -05:00
Scott Lahteine
0cbe448edf
Split up Control > Motion submenu
2017-05-28 12:52:24 -05:00
Scott Lahteine
a3645ec921
Reference op with variable name
2017-05-28 11:33:22 -05:00
Scott Lahteine
71367fd518
Scrolling status message option
2017-05-28 11:26:28 -05:00
Scott Lahteine
b0eae68f57
Prevent bed temperature being set too high
2017-05-28 11:11:17 -05:00
Scott Lahteine
493f0b0c62
Fix some compiler warnings
2017-05-28 11:06:33 -05:00
christianh17
f379a326cc
enable DEACTIVATE_SERVOS_AFTER_MOVE with switching nozzle
...
When using switching nozzle it should be possible to disable the servo after move. Do it only if you do not need the servo power to keep the position.
2017-05-28 15:33:28 +02:00
Scott Lahteine
33279a1e02
Code style tweak to gcode.h
2017-05-27 19:47:26 -05:00
Ernesto Martinez
ac959b12ee
Updates to language_es.h based on latest updates. ( #6871 )
...
Spanish language updates
2017-05-27 19:08:39 -05:00
Scott Lahteine
55c700d537
Tweak to gcode.h
2017-05-26 22:11:31 -05:00
Bob-the-Kuhn
868e7db4ae
value check was looking at the code
2017-05-26 14:49:42 -05:00
Thomas Moore
fb5e0ffe16
Unify M600 and M125 pause features ( #6407 )
...
* Unify M600 and M125 pause features
* Cleanup per thinkyhead's comments
* Rename filament_change_menu_response to advanced_pause_menu_response
* Include HAS_BED_PROBE in QUIET_PROBING
* Update gMax example file
* is_idle() is out of scope without the braces
* Convert FT-i3-2020 to Advance Pause names...
* Allow pause even if not printing
2017-05-26 13:01:02 -05:00
Scott Lahteine
b3a97b5013
Patch up LCD level bed menus
2017-05-25 23:53:31 -05:00
Scott Lahteine
78af2b1444
Fix PROBE_MANUALLY via G-code
2017-05-25 23:53:31 -05:00
Scott Lahteine
082da23391
One fewer EOL in M503 output
2017-05-25 23:53:31 -05:00
Scott Lahteine
b15e531464
Fix screen change on character display
2017-05-25 15:29:14 -05:00
Thomas Moore
44e657766e
Add incompatibility error to Sanity Check for MIXING_EXTRUDER and LIN_ADVANCE
2017-05-25 08:06:27 -05:00
Scott Lahteine
735405b2a4
Merge pull request #6848 from thinkyhead/bf_scara_M665
...
Add M665 for SCARA
2017-05-24 20:51:51 -05:00
Scott Lahteine
ffa901f373
Merge pull request #6839 from thinkyhead/bf_day_ending_in_y
...
UBL ultralcd.cpp patches
2017-05-24 17:55:44 -05:00
Scott Lahteine
361cbba113
Use M665 to set SCARA angle offsets
2017-05-24 17:49:24 -05:00
Scott Lahteine
5ed63a5724
Apply const in prepare_kinematic_move_to
2017-05-24 17:49:24 -05:00
Scott Lahteine
5cbe0244c5
Fixes for spindle/laser and SCARA probe bounds
2017-05-24 17:49:23 -05:00
Scott Lahteine
1f52c9f5df
Neater Megatronics 3 pins
2017-05-24 17:49:23 -05:00
Scott Lahteine
af81cb4cbb
Patch for M503 output
2017-05-24 17:49:09 -05:00
Scott Lahteine
1d167a6874
Some cleanup, fixes for ultralcd.cpp UBL code
...
- Free up 30 bytes of SRAM in UBL LCD code
- Fix BUILD_ABS_MESH temperature
- Fix UBL indentation in ultralcd.cpp
- UBL vars lowercase, "convert to positive" sensibly
2017-05-24 01:10:42 -05:00
Scott Lahteine
f4028fe088
New GCode Parser - Implementation
2017-05-23 14:15:10 -05:00
Scott Lahteine
002a06c507
New GCode Parser - Configuration
2017-05-23 14:15:07 -05:00
Scott Lahteine
ad915b667e
One more mesh_index_to_npos update
...
Followup to #6827
2017-05-23 13:02:50 -05:00
Scott Lahteine
2881f0a48d
Fix, extend G42 with P (probe) parameter
...
- Also fix handling of SCARA and misuse of `codenum`.
2017-05-23 04:55:42 -05:00
Scott Lahteine
d252d1b6a2
Merge pull request #6831 from thinkyhead/bf_move_g7
...
Move G7 to G42
2017-05-23 03:02:57 -05:00
Brian
82ca6248e2
Move G7 to G42
...
See: #6777
2017-05-22 23:21:35 -05:00
Scott Lahteine
26ffa558a3
Use redraw flag for both types of LCD
2017-05-22 18:34:54 -05:00
Scott Lahteine
3ff7515527
Merge pull request #6817 from cbusillo/patch-1
...
missing enable for M605 for duplication mode
2017-05-22 18:07:11 -05:00
Scott Lahteine
34cfbc90cd
Use new attribute macros in more places
2017-05-22 17:38:58 -05:00
Scott Lahteine
85b967657e
Embed G26/G29 in ubl class, with enhancements
2017-05-22 17:38:58 -05:00
Scott Lahteine
c99bd69889
Apply const float & more
2017-05-22 17:38:36 -05:00
Scott Lahteine
ad5638f78c
Cleanup some fastio code
2017-05-22 17:38:36 -05:00
Scott Lahteine
e271521c39
Single user_canceled function in G26
2017-05-22 17:38:36 -05:00
Scott Lahteine
c2ea22da49
Clean up whitespace
2017-05-22 17:38:36 -05:00
Scott Lahteine
ceb62fc7e1
Fixes #6828 : M428 bug
2017-05-22 17:34:03 -05:00
oldmcg
48f7652143
UBL G29 -P3.1 smart fill ( #6823 )
...
* UBL G29 -P3.1 mesh fill with distance-weighted least squares fit.
* Back to original -O0 on G29 for now.
2017-05-22 12:33:50 -05:00
Scott Lahteine
850203fb3a
Merge pull request #6816 from thinkyhead/bf_lcd_live_editing
...
Constrain LCD status message rendering
2017-05-22 11:15:35 -05:00
Roxy-3D
3129260c44
Misc. Clean Up ( #6822 )
...
* Misc. Clean Up
Mostly UBL related clean up.
- But fixed a bug in the thermistortables.
- Made G26 more responsive to user aborts.
- Added sanity checks for older name for UBL_MESH_VALIDATION.
- Made G29 P4 able to edit invalidated mesh points
- Restore a reasonable Fade Height for UBL when creating new state information
- Get UBL's Topology Map to look a little bit better
- Make sure the user doesn't see a blank screen when doing Mesh Editing.
* Huh??? GitHub Desktop screwed up!
* get the planner object in scope
* Fix out of scope z_fade_height
* Travis timed out...
I need a change so I can force a new commit and sync.
2017-05-21 22:09:51 -05:00
cbusillo
3b4116e73b
missing enable for M605 for duplication mode
...
I believe gcode_M605 will not be called when using DUAL_NOZZLE_DUPLICATION_MODE without this change.
2017-05-21 13:54:20 -04:00
Scott Lahteine
5e8892d6b5
Show Restore Failsafe item with EEPROM off
2017-05-21 12:52:44 -05:00
Scott Lahteine
76af9ac7c5
tweaks
2017-05-21 12:51:58 -05:00
Scott Lahteine
ba5910ab6c
Constrain LCD status message rendering
2017-05-21 12:35:16 -05:00
MagoKimbra
2c309a8f7c
Fix set_lcd_contrast
2017-05-21 19:01:44 +02:00
Scott Lahteine
22dbb2117c
Merge pull request #6812 from thinkyhead/bf_day_ending_in_y
...
Cleanup code, organize & document fastio pin mappings
2017-05-21 11:39:04 -05:00
Roxy-3D
364f8fb613
Update Configuration.h files to better names ( #6814 )
...
Changed UBL_G26_MESH_EDITING to UBL_G26_MESH_VALIDATION
Added UBL_MESH_EDIT_MOVES_Z to prepare for that change (coming next)
2017-05-21 11:10:22 -05:00
Scott Lahteine
d7fda2fe49
Formatting, const in G33
2017-05-21 10:40:05 -05:00
Scott Lahteine
1519b0e7c1
Split up fastio.h, document pin mappings
2017-05-21 10:33:27 -05:00
Scott Lahteine
49599caade
General cleanup to utf_mapper.h
2017-05-21 10:33:27 -05:00
Scott Lahteine
02f15f6775
UBL-related cleanup, spacing, standards
...
Reference: #6804
2017-05-21 10:33:26 -05:00
Scott Lahteine
52e20aeab3
Pins-related cleanup, formatting
2017-05-21 07:18:03 -05:00
Scott Lahteine
ea906e4da7
Merge pull request #6810 from thinkyhead/bf_lcd_live_editing
...
Add "live editing" option to LCD menus
2017-05-21 06:11:52 -05:00
Scott Lahteine
11fc9564c9
Add live editing option to LCD menu
2017-05-21 05:29:46 -05:00
Scott Lahteine
8a0a5cfccc
Temp-related cosmetic changes
2017-05-21 04:49:25 -05:00
Scott Lahteine
b29dbbd5e4
Use uint16_t for temps
2017-05-21 04:48:53 -05:00
Scott Lahteine
ebcd1aaf88
Access hotend/bed temperatures as float
2017-05-21 04:46:31 -05:00
Scott Lahteine
6ce2b1ff4a
G33 evolutionary changes
2017-05-20 19:23:39 -05:00
Scott Lahteine
3c061a9f9a
UBL tabs, whitespace, spelling, etc.
2017-05-19 14:16:50 -05:00
Scott Lahteine
75badae2f8
Disable PROBE_MANUALLY for UBL
...
Plus some other UBL tweaks.
2017-05-19 07:13:18 -05:00
Scott Lahteine
94a4af1d7f
Merge pull request #6773 from thinkyhead/bf_lcd_patch_e5
...
Patch LCD code for 5th extruder
2017-05-18 15:26:55 -05:00
Brian
01f452c37c
Tweak Azteeg X3 PRO _pins.h so Viki2 will work for those without a case light.
...
- add comment explaining that the Panucatt Viki2 wiring diagram uses pin 44
2017-05-18 13:00:13 -04:00
Brian
e09b4ce4a5
Add checking
2017-05-17 19:46:16 -04:00
Brian
13599a73c7
Add G7
gcode command to move between UBL mesh points
...
- can be augmented in the future to enable for other leveling systems
Quite simple, but did not want to modify `G1` as the additional checking would slow it down.
Tested & working.
2017-05-17 19:05:36 -04:00
Brian
43c24f0027
Fix recent regressions, &c.
...
- fix broken `M421` due to less-than-careful optimization
- add HOME_AFTER_DEACTIVATE define to advanced config so not everyone has to rehome after steppers are deactivated
- misc. cleanups (remove unused label, unused variables)
2017-05-17 17:21:46 -04:00
Scott Lahteine
3843a5151a
Patch LCD code for 5th extruder, EEPROM reset
2017-05-17 15:33:51 -05:00
Scott Lahteine
6c064bb7d6
Some probe_pt error-handling
2017-05-17 15:33:51 -05:00
Brian
3370329751
Fix broken EEPROM save/load
2017-05-17 12:41:27 -04:00
Scott Lahteine
f0fe26c411
Ensure Arduino.h and configs are included for serial.cpp
2017-05-17 05:07:35 -05:00
Scott Lahteine
ffb5353294
Merge pull request #6738 from thinkyhead/bf_config_crc_rebase
...
Implement CRC16, develop mesh allocation table
2017-05-17 04:44:00 -05:00
Scott Lahteine
e806e6419a
Merge pull request #6768 from thinkyhead/rc_spindle_m3_m5
...
Spindle / Laser support
2017-05-17 04:39:32 -05:00
Scott Lahteine
d6f49c6626
Merge pull request #6752 from jdelahayes/bugfix-1.1.x
...
Update french language
2017-05-17 04:32:28 -05:00
Scott Lahteine
55a87da036
SPINDLE/LASER implementation
2017-05-17 04:26:15 -05:00
Scott Lahteine
ffe0e2d19a
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
Scott Lahteine
99c4900a98
SPINDLE/LASER config changes
2017-05-17 04:23:06 -05:00
Scott Lahteine
a3abfeac47
Mark strings needing translation
2017-05-17 03:49:33 -05:00
Scott Lahteine
7f4e4b1212
UBL name/state methods
2017-05-17 03:49:32 -05:00
Brian
7852369987
Implement CRC16, develop mesh allocation table
...
- Add crc16 utility function
- Implement CRC16 for config store, remove old checksum, increment layout version
- Move UBL mesh store/load to MarlinSettings; increment UBL_VERSION
- Begin to lay out MAT structure, prototype functions, etc.
- Rename ubl.state.eeprom_storage_slot to .storage_slot
- Misc. optimization
- Cleanup/standardize/improve some messages
This is a work in progress!
2017-05-17 03:49:19 -05:00
Scott Lahteine
00d358d92d
Fix a PROBE_MANUALLY bug in ultralcd.cpp
2017-05-17 03:49:19 -05:00
fixoid
c2321b1cdd
Separate SWITCHING_NOZZLE and SWITCHING_EXTRUDER
2017-05-16 19:25:17 -05:00
Scott Lahteine
238fb53617
Patch home_all_axes to ignore G28 XYZ parameters
2017-05-16 16:18:38 -05:00
Scott Lahteine
6b6630e11b
Clean up trailing whitespace and tabs
2017-05-16 16:06:18 -05:00
Roxy-3D
d30e478f97
Fix incorrectly optimized find_closest_mesh_point_of_type() function ( #6761 )
2017-05-16 15:24:24 -05:00
oldmcg
5a9e52a3e0
Use COPY_XYZE macro to copy exactly 4 elements ( #6758 )
...
Fix undefined DELTA_PROBEABLE_RADIUS for UBL_DELTA
2017-05-16 11:47:51 -05:00
Roxy-3D
8606644343
M48 Fix for Delta Configuration Files & UBL G29 only homes when necessary ( #6757 )
...
* Fix M48 for Delta's There was a scope issue: DELTA_PROBEABLE_RADIUS wasn't getting defined.
* Check if the specified G29 command requires homing
2017-05-16 11:23:50 -05:00
Tannoo
0cd398c25d
UBL Menu Updates ( #6751 )
...
Things should be pretty stable for a while.
But it wouldn't surprise me if the Delta people have a need for a few special commands.
2017-05-16 08:45:31 -05:00
Johann Delahayes
a5737cba7c
Update french language
2017-05-16 12:27:42 +02:00
Scott Lahteine
0fef9a2983
Remove "ubl." prefix from calls within ubl method
2017-05-16 01:19:45 -05:00
Scott Lahteine
14a4257c7b
UBL tabs, whitespace, spelling, etc.
2017-05-16 01:19:45 -05:00
Scott Lahteine
56e2e331ed
UBL G29: replace 'O' with 'T'
...
Since we already used 'T' for `G29` Topology Report in the past, and since 'T' is available…
2017-05-16 01:18:41 -05:00
Scott Lahteine
091f94a6bf
Fix up M421 and some comments
2017-05-16 01:14:03 -05:00
Scott Lahteine
4ec4ecff1a
Reduce find_closest_mesh_point_of_type a little
2017-05-16 01:14:03 -05:00
Scott Lahteine
f1a1c6873e
Patch lcd_implementation_status_screen compiler warning
2017-05-16 00:59:50 -05:00
moebyusDev
2266c0780d
fixed spanish lang
...
It was missing MSG_FILAMENT_CHANGE_HEAT_2 and MSG_FILAMENT_CHANGE_HEATING_2
2017-05-16 00:35:36 -05:00
oldmcg
b213a45efb
UBL_DELTA post merge cleanup ( #6705 )
...
* UBL_DELTA post merge cleanup:
fix fade_height, lost during some previous merge
fix float cx,cy which are not const
move repeated z_cxcy calc line inside loop
style fixes and comment fixes/alignment
* Update ubl_motion.cpp
remove unnecessary parentheses
* Update Conditionals_post.h
Change name of define to more accurate meaning:
UBL_GRANULAR_SEGMENTATION_FOR_CARTESIAN
which is not and should not be the default for cartesians with UBL.
2017-05-16 00:30:29 -05:00
Roxy-3D
6f86c46fa6
Fix typo that caused scope issues for DELTA ( #6750 )
2017-05-15 23:13:45 -05:00
Roxy-3D
1fbcbc05f6
UBL no longer flout's the sacred GCode standard ( #6745 )
...
Also clean up ubl_motion.cpp debug info and fix declaration of cx & cy
2017-05-15 16:25:01 -05:00
Scott Lahteine
c262ea92e0
Merge pull request #6733 from abusca/Euskera
...
Updated Basque translation
2017-05-15 02:30:11 -05:00
Scott Lahteine
267f77b18b
More constraint on axis_unhomed_error
2017-05-14 16:03:02 -05:00
Aaron Busca
645096b87a
Updated Basque translation
...
Updated Basque translation with new strings.
2017-05-14 18:29:50 +02:00
Roxy-3D
40d95a4e23
Update the gMax files to display better with Proportional Fonts ( #6727 )
...
Update the gMax files to display better with Proportional Fonts
2017-05-13 16:33:04 -05:00
Roxy-3D
c06af63f87
G26's default behaviour ought to be the entire mesh ( #6726 )
...
Adding the capability to specify ahead of time how much of the validation pattern to print made it so by default G26 only did one circle and no connecting lines.
It is more natural for the unsophisticated user to just do the entire mesh (bed). We default the repetition count to GRID_MAX_POINTS+1 to insure we get every last one of them!
2017-05-13 15:53:44 -05:00
Roxy-3D
15040821e0
Setup FolgerTech-i3-2020 files better for the user ( #6724 )
...
UltiPanel was enabled, but technically, it is a REPRAP_DISCOUNT_SMART_CONTROLLER
Either configuration works on the machine. But we want it 'Right'.
Setup the Proportional Font spacing so columns line up nicer on PronterFace and Repetier Host.
2017-05-13 15:14:03 -05:00
Scott Lahteine
67c9b1e332
Update M665 comment, fix M665 code_value code.
2017-05-13 05:11:29 -05:00
Scott Lahteine
37399e3cb5
Fix prepare_move_to_destination_cartesian for UBL
2017-05-13 04:13:19 -05:00
Scott Lahteine
a7fb55ea6d
Use GRID_MAX_POINTS. Some formatting
2017-05-12 06:57:19 -05:00
Scott Lahteine
e51b5774db
Merge pull request #6699 from mtowara/patch-1
...
Bugfix PRINTER_EVENT_LEDS
2017-05-12 05:58:25 -05:00
Scott Lahteine
056350d9bf
Merge pull request #6656 from FHeilmann/fix_fwretract_pos_z_move
...
Fix FWRetract with positive z-moves during retracted state
2017-05-12 05:56:08 -05:00
Scott Lahteine
0e582bcfb7
Fix #6691 - redundant line in M665
2017-05-12 05:17:38 -05:00
Markus Towara
68ae7c8d7a
Bugfix PRINTER_EVENT_LEDS
...
Extra closing curly bracket terminates while loop early if PRINTER_EVENT_LEDS defined
2017-05-12 12:13:23 +02:00
Scott Lahteine
ba29da56e0
Add disclaimer for verboten parameters
2017-05-12 02:34:53 -05:00
Scott Lahteine
0696dda470
Cleanups to UBL_DELTA
2017-05-12 02:34:53 -05:00
Scott Lahteine
cbfca29522
M421 tweaks, just to use const
2017-05-12 01:32:34 -05:00
Scott Lahteine
233f824dd6
Define GRID_MAX_POINTS
2017-05-12 01:32:34 -05:00
Scott Lahteine
b17e2d3dcd
Apply const in Marlin_main.cpp
2017-05-12 01:32:33 -05:00
Scott Lahteine
92fbea2906
Add some GCodes to the header of Marlin_main.cpp
2017-05-12 01:32:33 -05:00
Scott Lahteine
94e90ca26c
Tweak M80/M81 descriptions
2017-05-12 01:32:33 -05:00
Scott Lahteine
ee50dfaaf3
Adjust G26 arguments
2017-05-12 01:32:33 -05:00
Scott Lahteine
b0ba5cae73
Fix a spelling boo
2017-05-12 01:32:33 -05:00
oldmcg
91841d75c9
UBL_DELTA ( #6695 )
...
UBL on Delta's.... Should be close! Should not affect any Cartesian printer.
2017-05-11 22:33:47 -05:00
bgort
445003dbb8
Merge pull request #6694 from bgort/g29p2b
...
UBL: Minor improvement to G29 P2
2017-05-11 20:44:43 -04:00
Brian
5a5dba6fc8
UBL: Minor improvement to G29 P2
...
- allow H code value to override probing height
- minor cleanups
2017-05-11 18:54:34 -04:00
Brian
ae676490c9
M421: Add 'adjust closest point' capability
...
- Split M421 into separate versions for bilinear and ubl
- Fix minor issue in G26
2017-05-11 12:10:38 -04:00
Scott Lahteine
9a688d1456
Merge pull request #6682 from thinkyhead/bf_M80_s_arg
...
"M80 S" to report the state of the PSU pin
2017-05-10 20:29:01 -05:00
Roxy-3D
b63e82f309
M421 Mesh Point Offset and misc. UBL clean up ( #6685 )
...
* M421 Mesh Point Offset and misc. UBL clean up
Allow M421 to accept an offset as well as absolute value for a specified
mesh point.
And misc. UBL clean up to reduce redundent code.
* Better error checking for M421
* Fix M421 Y index bug
I just noticed.... We've had a Y index bug for who knows how long?
2017-05-10 18:54:10 -05:00
Pablo Ventura
539e0c2f31
"M80 S" to report the state of the PSU pin
2017-05-10 17:58:58 -05:00
bgort
df42428281
Merge pull request #6665 from bgort/font
...
Add proportional font adjustment ratio
2017-05-10 17:30:51 -04:00
Brian
2604742191
Add proportional font adjustment ratio
...
- update example configs
2017-05-10 17:19:03 -04:00
bgort
b3407a371b
Merge pull request #6676 from bgort/g26zhop
...
G26: Add 0.5mm Z-bump between circles to minimize pattern scraping
2017-05-10 17:12:05 -04:00
bgort
c33d99c5b2
Merge pull request #6680 from bgort/g26repeat
...
G26: Add 'Repeat' Option
2017-05-10 17:11:34 -04:00
Bob-the-Kuhn
7325035aac
Merge pull request #6637 from Tannoo/UBL_Menu_System_1.1
...
UBL Menu System 1.1
2017-05-10 15:54:48 -05:00
Brian
f7a201b0d0
G26: Add 'Repeat' Option
...
- Allows for specifying number of points to print/validate, using 'R' code like with G29 P4 Rx
- Moved the code for Random to 'M' so we could be consistent with G29 P4
- G26 instructions indenting/cleanup
2017-05-10 16:52:08 -04:00
Brian
9c5957fc77
G26: Add 0.5mm Z-bump between circles to minimize pattern scraping
2017-05-10 16:11:59 -04:00
Brian
4da14b14f4
UBL Cleanup/Bugfix
...
- Fix bug in ubl_line_to_destination
- Improve/fix output of some ubl.h functions
2017-05-10 13:56:17 -04:00
Tannoo
66db6c3acc
UBL Menu System 1.1
...
/**
* UBL System submenu
*
* Prepare
* - Unified Bed Leveling
* - Activate UBL
* - Deactivate UBL
* - Mesh Storage
* Memory Slot:
* Load Bed Mesh
* Save Bed Mesh
* - Output Map
* Map Type:
* Output Bed Mesh Host / Output Bed Mesh CSV
* - UBL Tools
* - Build Mesh
* Build PLA Mesh
* Build ABS Mesh
* - Build Custom Mesh
* Hotend Temp:
* Bed Temp:
* Build Custom Mesh
* Info Screen
* - Build Cold Mesh
* - Fill-in Mesh
* Fill-in Mesh
* Smart Fill-in
* Manual Fill-in
* Info Screen
* Continue Bed Mesh
* Invalidate All
* Invalidate Closest
* - Validate Mesh
* PLA Mesh Validation
* ABS Mesh Validation
* - Custom Mesh Validation
* Hotend Temp:
* Bed Temp:
* Validate Mesh
* Info Screen
* - Edit Mesh
* Fine Tune All
* Fine Tune Closest
* - Adjust Mesh Height
* Height Amount:
* Adjust Mesh Height
* Info Screen
* - Mesh Leveling
* 3-Point Mesh Leveling
* - Grid Mesh Leveling
* Side points:
* Level Mesh
* Info Screen
* - Output UBL Info
*/
2017-05-10 12:14:43 -05:00
Brian
3b0127cf8e
Fix compiler complaint related to M100
2017-05-09 21:45:44 -04:00
Scott Lahteine
11104f177b
Apply const in BABYSTEPPING
2017-05-09 12:37:23 -05:00
Scott Lahteine
081bf1f879
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
Scott Lahteine
a9487c9443
Reduce redundancy in BLTOUCH conditionals
2017-05-09 11:52:24 -05:00
Scott Lahteine
8d961b51cc
Eliminate M100 compiler warnings?
2017-05-09 11:32:15 -05:00
bgort
efb9ce24d9
Merge pull request #6645 from tcm0116/bltouch_config
...
Automatically define Z_MIN_PROBE_ENDSTOP_INVERTING for BLTouch
2017-05-09 09:49:16 -04:00
bgort
e2f07917ab
Merge pull request #6644 from tcm0116/bltouch_menu
...
Move BLTouch LCD menu from Main to Main/Control
2017-05-09 09:49:02 -04:00
Florian Heilmann
fe96376a73
Fix FWRetract with positive z-moves during retracted state
2017-05-09 13:54:57 +02:00
Scott Lahteine
47cae2929f
Patch platformio.ini to fix build error in DevIoT
...
For compatibility with DevIoT, until that can be solved.
2017-05-08 20:27:14 -05:00
Scott Lahteine
911a87e006
Disable SCARA feedrate scaling by default
2017-05-08 14:41:03 -05:00
Scott Lahteine
71396f77d3
Cleanups following recent commits
2017-05-08 14:23:01 -05:00
Scott Lahteine
dca48f0e63
Move platformio.ini back to Marlin folder - it works there
2017-05-08 14:23:01 -05:00
Scott Lahteine
a6dafb058e
Small reduction in error code size
2017-05-08 13:58:09 -05:00
Scott Lahteine
a1e04942a2
Cleanup to software PWM variables
2017-05-08 13:51:45 -05:00
Thomas Moore
a20d0794e6
Automatically define Z_MIN_PROBE_ENDSTOP_INVERTING for BLTouch
2017-05-08 16:28:44 +00:00
Thomas Moore
3279337f47
Move BLTouch LCD menu from Main to Main/Control
2017-05-08 15:21:01 +00:00
Brian
6cb0fa4128
Cleanup previous implementation of new quiet probing
...
Saves a few lines of code.
2017-05-08 08:13:46 -04:00
bgort
4b7f8ad9c6
Merge pull request #6610 from bgort/pio-improvements2
...
PlatformIO-related changes
2017-05-08 07:52:42 -04:00
Scott Lahteine
56ca47ab9d
Patch configuration temp units
2017-05-07 21:32:01 -05:00
Scott Lahteine
421dd62800
Adjust spacing of "spaces"
2017-05-07 21:28:54 -05:00
Scott Lahteine
26dba44cd3
Patch redundant lcd settings
2017-05-07 21:28:54 -05:00
Scott Lahteine
34b5041576
Spacing adjustment, ubl_G29
2017-05-07 21:28:54 -05:00
Scott Lahteine
1c4ed8b106
Note 5 extruders in config comments
2017-05-07 21:28:54 -05:00
Scott Lahteine
6e4a5cc8c6
Patch missing const in temp_abs
2017-05-07 21:13:44 -05:00
bgort
d35e2fda10
Merge pull request #6622 from bgort/silentprobing
...
Improve BLTOUCH_HEATERS_OFF functionality
2017-05-07 21:33:44 -04:00
Scott Lahteine
6ed52fb765
Adjust spacing in LSF
2017-05-07 19:11:52 -05:00
Roxy-3D
110afff415
More misc UBL fixes and update gMax examples ( #6632 )
...
I think I forgot to Sync before I committed last time. Some UBL
changes did not stick.
Also, update the gMax configuaration.h file so other than unique numbers
and settings, it exactly matches the default configuration.h file.
2017-05-07 19:02:24 -05:00
Roxy-3D
d92fa40c62
misc. UBL fixes ( #6631 )
...
* Restore LSF functionality
Some of the typo's persisted... Hopefully this gets them all fixed.
* Restore user's expectations of how G28 should behave
* Allow Nozzle size control with ornery host programs
2017-05-07 18:23:48 -05:00
Brian
faa270071d
Improve BLTOUCH_HEATERS_OFF functionality
...
- rename to PROBING_HEATERS_OFF
- move heater pausing functionality into thermalManager
- add variables, pause(), ispaused(), other functions
- add fan pausing functionality -> PROBING_FANS_OFF
- add probing_pause() wrapper
- move pausing into do_homing_move() and do_probe_move() to minimize quiet time and so other probe types can benefit
- example configs
2017-05-07 16:22:08 -04:00
lrpirlet
d66e9efac5
G29 P1 stops reporting Invalid location with this patch
2017-05-07 15:07:26 +02:00
Scott Lahteine
ce507deb9f
Support temperature units in M503
2017-05-06 20:24:51 -05:00
bgort
a59066bca9
Various improvements - mostly UBL-related ( #6607 )
...
UBL Clean up.
2017-05-06 18:59:16 -05:00
Brian
0446dd3ad8
PlatformIO-related changes
...
- move platformio.ini out of source directory to be more consistent with 'normal' PlatformIO usage
- facilitates IDE integration
- add related .gitignores
2017-05-06 06:22:10 -04:00
Scott Lahteine
77769e284f
Edit configuration comments
2017-05-05 13:32:31 -05:00
Scott Lahteine
6876e79d42
Tweak command index increment
2017-05-05 13:32:31 -05:00
Scott Lahteine
7fcb5c1424
Minor fix in K8200 readme
2017-05-05 11:25:11 -05:00
Max Matveev
267f3a03d9
Fixed USE_CONTROLLER_FAN #define usage
2017-05-04 23:38:29 +02:00
bgort
ae7c602031
fix error in M105 output -- use SERIAL_PROTOCOL for ints instead of SERIAL_PROTOCOL_F ( #6584 )
...
also removed wayward 'address of' ampersand in setTargetHotend and setTargetBed parameters
2017-05-04 16:09:45 -05:00
Scott Lahteine
3cd9af2409
bugfix-1.1.x ReadMe, Version, helper scripts
2017-05-04 07:17:10 -05:00
Florian Heilmann
15268770f5
Fix broken fwretract recovery extruder feedrate
...
When both lowering and recovery are performed using the same "prepare_move_to_destination()" the extruder recovery feedrate ends up being ignored and, instead, is only capped by either the maximum e-speed or the time it takes to perform the z-lowering.
Performing the two moves separately from each other ensures a correct recovery feedrate.
2017-05-04 11:34:28 +02:00
Scott Lahteine
58210c3a19
Merge pull request #6568 from thinkyhead/rc_bilinear_extension
...
Add EXTRAPOLATE_BEYOND_GRID option to bilinear leveling
2017-05-04 00:46:05 -05:00
Scott Lahteine
da08e11acd
Add EXTRAPOLATE_BEYOND_GRID option to bilinear leveling
2017-05-04 00:19:07 -05:00
Scott Lahteine
6834e36871
Merge pull request #6567 from thinkyhead/rc_sdcard_stop
...
Shutdown heaters, autotemp on SD Cancel
2017-05-03 23:54:29 -05:00
Scott Lahteine
399efd66ed
Click to resume
2017-05-03 22:26:06 -05:00
Scott Lahteine
1196e3ca59
SDCard print completion can use "M0"
2017-05-03 22:24:03 -05:00
Scott Lahteine
6854f08d22
Shut down autotemp in disable_all_heaters
2017-05-03 20:54:26 -05:00
Thomas Moore
acec237092
Shutdown heaters and fan after canceling a print from the SD card
2017-05-03 20:43:09 -05:00
Scott Lahteine
11b6a3cbb6
Fix regression in least_squares_fit.cpp
2017-05-03 19:21:44 -05:00
Scott Lahteine
e1b85ff67b
Merge pull request #6559 from thinkyhead/rc_more_optimal
...
Compact smart_fill_mesh slightly
2017-05-03 19:07:36 -05:00
Scott Lahteine
9890141f7b
M100 tweak
2017-05-03 17:28:09 -05:00
Scott Lahteine
2658cc707a
Treat temperature as integer, when possible
2017-05-03 17:27:25 -05:00
Scott Lahteine
1b2c7ec20a
Make G26 compatible with inches and thermal unit modes
2017-05-03 17:12:48 -05:00
Scott Lahteine
241bdffe65
Dress up Bilinear Leveling code
2017-05-03 17:12:35 -05:00
Scott Lahteine
67ecf06cc4
Patch issue in gcode_M900
...
Noted in #6550
2017-05-03 15:26:00 -05:00
Scott Lahteine
de5e485ed7
Explicit upward angle solution
2017-05-03 01:19:44 -05:00
Scott Lahteine
ecdf68735f
Compact smart_fill_mesh slightly
2017-05-03 01:06:58 -05:00
Scott Lahteine
628391304f
Merge pull request #6552 from thinkyhead/rc_more_ubl_cleanup
...
Further cleanup of UBL
2017-05-02 22:46:04 -05:00
Scott Lahteine
902fe76db9
Merge pull request #6556 from thinkyhead/rc_use_controller_fan
...
Implement USE_CONTROLLER_FAN as a feature
2017-05-02 22:43:26 -05:00
Scott Lahteine
7ba7474a73
Drop extra parens from address-of operator
2017-05-02 22:22:23 -05:00
Scott Lahteine
0bf5add075
Use UBL_MESH_(MIN|MAX)_[XY] for G29 move limits
2017-05-02 22:22:23 -05:00
Scott Lahteine
b8ba3b7647
Use 'sq' macro where possible
2017-05-02 22:22:23 -05:00
Scott Lahteine
66eba3346b
Remove G29 lcd control debugging
2017-05-02 22:22:23 -05:00
Scott Lahteine
3517154135
Reduce code size, fix bug in smart_fill_mesh
2017-05-02 22:22:23 -05:00
Scott Lahteine
c4e34adcf1
Apply formatting, coding standards to UBL
2017-05-02 22:22:23 -05:00
Scott Lahteine
f4239e62b1
Merge pull request #6557 from thinkyhead/rc_hotend_status_item
...
Keep refreshing LCD if hotend status is on-screen
2017-05-02 22:04:21 -05:00
Scott Lahteine
fc857c5b78
Merge pull request #6549 from thinkyhead/rc_bltouch_refix
...
Fix BLTOUCH_HEATERS_OFF bug
2017-05-02 21:53:09 -05:00
Thomas Moore
b39f634252
Continuously update LCD when hotend status is displayed in Filament Change screens
2017-05-02 21:49:40 -05:00
Scott Lahteine
2c13922c46
Implement USE_CONTROLLER_FAN as a feature
2017-05-02 20:18:52 -05:00
Scott Lahteine
492bc536bf
Modify debug methods to take PSTR
2017-05-02 17:53:40 -05:00
Bob-the-Kuhn
e5a27d9f36
G29 P2 & P4 bug fixes & improvements
2017-05-02 17:53:40 -05:00
Scott Lahteine
b93be716cf
Remove trailing whitespace
2017-05-02 17:53:40 -05:00
Scott Lahteine
76eca9732d
Fix mis-named language string define in Dutch
2017-05-02 16:08:09 -05:00
Scott Lahteine
806f670092
Merge pull request #6511 from Bob-the-Kuhn/UBL--G26-minor-improvements
...
UBL: G26 minor improvements
2017-05-02 16:06:22 -05:00
Scott Lahteine
0803c9d997
Merge pull request #6533 from thinkyhead/rc_autocal_patches
...
General cleanup of G33
2017-05-02 16:01:02 -05:00
Brian
ff5fed137f
Fix BLTOUCH_HEATERS_OFF bug
2017-05-02 15:53:52 -05:00
Scott Lahteine
ca1dd739a3
Organize ubl.h defines by the files they serve
2017-05-02 15:47:06 -05:00
Scott Lahteine
0449f69179
Cleanup patch to recent merge
2017-05-02 15:47:06 -05:00
LVD-AC
da2abad636
Various cleanups of G33
...
- update comment section
- redefined P5 grid
- minor clean to probe radius routine
- updated EEPROM version to V37 according remark in #6517
2017-05-02 15:47:06 -05:00
Bob-the-Kuhn
7ce613db0a
Fix Conditionals test for endstop plug used by Z2 or probe.
2017-05-02 15:41:47 -05:00
Scott Lahteine
ef750ae86b
Towards supporting Z2 in Endstops::report_state
2017-05-02 15:39:32 -05:00
Scott Lahteine
c03c623951
Sanity-check Z2 endstop assigned to a nonexistent pin.
2017-05-02 15:39:00 -05:00
Scott Lahteine
70f31b6c76
Throw an error if no E stepper is free for X2, Y2, Z2
2017-05-02 15:13:47 -05:00
Scott Lahteine
ac69eca586
Merge pull request #6538 from bgort/ubl_gridlbls
...
Fix, cleanup, prettify `G29 O` output
2017-05-02 14:09:18 -05:00
Scott Lahteine
99b11db1a1
Merge pull request #6537 from thinkyhead/rc_cleanup_sunday
...
Various leveling-related patches
2017-05-02 00:59:59 -05:00
Roxy-3D
41e63bbb7c
Fix Horizontal and Vertical UBL optimization bug. ( #6540 )
...
* Fix Horizontal and Vertical optimization bug.
And drastically reduce the debug code foot print....
* Yeah Baby!
The debug print is going A - OK !
2017-05-01 23:52:33 -05:00
Scott Lahteine
e79b335367
Patches for leveling reactivation in G28 / M48
2017-05-01 17:38:57 -05:00
Brian
92e22c3bf2
Fix, cleanup, prettify G29 O
output
2017-05-01 18:19:57 -04:00
Scott Lahteine
7d5cd7e0d7
Tweak set_bed_leveling_enabled
2017-05-01 16:46:52 -05:00
Scott Lahteine
ed81e9b3d3
Adjust leveling conditionals
2017-05-01 16:46:48 -05:00
Scott Lahteine
a64e5659ce
Clean up G26 external references, private vars
2017-05-01 15:17:52 -05:00
Scott Lahteine
2887c20788
Add a function to home all axes (i.e., gcode_G28)
2017-05-01 15:03:37 -05:00
Scott Lahteine
8f895d5e01
Merge pull request #6530 from thinkyhead/rc_cleanups_2
...
Fixes for DUAL_NOZZLE_DUPLICATION_MODE
2017-05-01 12:34:11 -05:00
Scott Lahteine
8002672938
Fixes for DUAL_NOZZLE_DUPLICATION_MODE
2017-05-01 12:20:25 -05:00
Scott Lahteine
f69acde966
Merge pull request #6528 from MarlinFirmware/revert-6416-negative-mesh-fix
...
Revert "Fix for Meshpositions if printer has negative endstop positions"
2017-05-01 11:51:13 -05:00
Scott Lahteine
4803a4322e
Revert "Fix for Meshpositions if printer has negative endstop positions"
2017-05-01 11:25:07 -05:00
Scott Lahteine
4f74c416a4
Patch for BLTOUCH_HEATERS_OFF
2017-05-01 11:13:40 -05:00
Scott Lahteine
1823a6ea29
Patch for missing DELTA_HEIGHT
2017-05-01 11:05:35 -05:00
Scott Lahteine
d814e468d2
Fix set_heaters_for_bltouch and usage
...
- Only call `set_heaters_for_bltouch` when actually deploying/stowing
- Clear `next_emi_protection` when re-enabling heaters
2017-05-01 02:27:52 -05:00
Brian
4e1448e75a
Various fixes for compiler warnings
...
add BLTouch-related messages in english and (rusty) french;
add missing endstops.h in ultralcd.cpp;
fix misc. compiler warnings;
fix lsf_reset - ZERO macro can't handle a pointer as it would only memset the size of the pointer, not the size of the entire struct
2017-05-01 02:12:40 -05:00
Scott Lahteine
fc9919b749
Merge pull request #6515 from thinkyhead/rc_cleanup_sunday
...
Some minor cleanups to code formatting
2017-04-30 22:58:16 -05:00
Scott Lahteine
c12bc51a59
cardreader.cpp spacing tweak
2017-04-30 22:27:47 -05:00
Scott Lahteine
46b714a52f
Cleanup spacing in pinsDebug.h
2017-04-30 22:27:26 -05:00
Scott Lahteine
88141ca717
Remove things that aren't pins from pinsDebug_list.h
2017-04-30 22:24:51 -05:00
Scott Lahteine
ff35b11d08
Resolve compiler complaint about memset volatile *
2017-04-30 22:24:03 -05:00
Scott Lahteine
0b421e97c9
Rename some (unused) OMCA pins
2017-04-30 22:16:44 -05:00
Scott Lahteine
c2c9f01c8e
Patch newly-introduced bug in IS_Z2_OR_PROBE
2017-04-30 20:17:10 -05:00
Scott Lahteine
819df5e06d
Cleanups to pins debugging
2017-04-30 20:17:10 -05:00
Scott Lahteine
42824b0e1f
Use new serial spacing function to save PROGMEM
2017-04-30 20:14:42 -05:00
Scott Lahteine
cd72901fb7
Cleanups to UBL code
2017-04-30 20:14:42 -05:00
Bob-the-Kuhn
ce87c7803e
implement G26 changes per review
2017-04-30 19:05:25 -05:00
jaysonkelly
769817ce5e
Need to define this for Rigidboard V2
...
Motor current defaults need to be defined for Rigidboard
2017-04-30 19:04:27 -05:00
Scott Lahteine
39c6c5621b
Merge pull request #6416 from SkyNet3D/negative-mesh-fix
...
Fix for Meshpositions if printer has negative endstop positions
2017-04-30 17:38:41 -05:00
Scott Lahteine
671a44b8aa
Merge pull request #6410 from teemuatlut/LVD-Delta
...
Delta auto-calibration updates
2017-04-30 16:39:51 -05:00
Scott Lahteine
5d5c9a040a
Merge pull request #6509 from thinkyhead/rc_config_patches
...
Configuration cleanup
2017-04-30 16:10:27 -05:00
Scott Lahteine
d480b6f75a
Enable E1 stepper for DUAL_NOZZLE_DUPLICATION_MODE
2017-04-30 16:01:01 -05:00
Bob-the-Kuhn
dcde202157
Add startup notice & update host temperatures while waiting
...
Right now G26 doesn't send a notice to the host that it's running. It's
not until the heaters are at temperature that you know for sure if it's
running or not.
Added host temperature prints so that someone watching the host
interface will see the temperatures change during the warm up period.
Updates are sent every 5 seconds.
2017-04-30 15:51:58 -05:00
Scott Lahteine
54751e8557
Put DISTINCT_E_FACTORS adjacent to the affected settings
2017-04-30 15:30:31 -05:00
Scott Lahteine
0dbe4b3e54
Edit configurations to reduce verbosity, arrange logically
2017-04-30 15:30:31 -05:00
Scott Lahteine
0750933bc6
Merge pull request #6490 from Bob-the-Kuhn/Missing-X-stop
...
Endstop not enabled if pin is zero
2017-04-30 15:09:36 -05:00
bgort
5ace3699b1
Output (commented) coordinates on G29 S-1; helps identify the x/y points that correspond with i/j coordinates, which eases manual tweaking of z values ( #6507 )
2017-04-30 14:59:34 -05:00
Scott Lahteine
d7d4378481
Remove inaccurate version description
2017-04-30 14:57:19 -05:00
Scott Lahteine
f169c04604
Merge pull request #6491 from thinkyhead/rc_cleanup_wednesday
...
Various cleanups for recent merges
2017-04-30 14:56:48 -05:00
Scott Lahteine
6d63255ddc
Merge pull request #6508 from bgort/pio_improvements
...
PlatformIO-related improvement
2017-04-30 14:53:22 -05:00
LVD-AC
cafc48dff8
little oops
2017-04-30 22:17:49 +03:00
Brian
627730948d
Add U8glib as a dependency to platformio.ini for those who use PlatformIO; this makes compiling even easier as u8glib will be downloaded and included automatically.
...
Also added the new .pio-related directory to .gitignore, and a few ignores for those who use cmake.
2017-04-30 15:13:51 -04:00
bgort
5974d8e168
change G26 default nozzle size to 0.4, consistent with instructions ( #6506 )
2017-04-30 13:23:46 -05:00
LVD-AC
471a321624
leaner code for probe routine
2017-04-30 19:15:16 +03:00
bgort
3c0d5ba0a1
allow idle() to be called - fixes sometimes crash/hang in G29 I; ( #6505 )
2017-04-30 10:22:31 -05:00
Roxy-3D
2509587b5a
Correct over optimization of pre-initialized variables ( #6500 )
...
* Correct over optimization of pre-initialized variables
NEAR_ZERO() works most of the time... But it leaves corner cases
uncovered. We need to explicitly check if these variables are +/-
infinity.
* Correct over optimization of pre-initialized variables
2017-04-29 22:01:29 -05:00
LVD-AC
585c00a728
Proposed changes
...
This is what I did yesterday:
- basicly gave the tests more comprehensive names; put all the
declarations at the top; got rid of the magic negative C-value (renamed
to P + A, O, T)
- "cos(RADIANS(180 + 30 * axis)) * (1 + circles * 0.1 * ((zig_zag) ? 1 :
-1)) * delta_calibration_radius" compiles wrong is zig_zag statement is
without brackets
- DELTA_TOWER_ANGLE_TRIM reset to 3 values (the calcs use the 3th value
to normalize will not compile otherwise)
-Wrote 3 dummies to keep EEPROM lenght the same
-Reset the configs to the 'original' with autocal + menu disabled (but
can be enabled of course)
2017-04-29 18:53:14 +03:00
Scott Lahteine
29fa241617
Initial patches to G33
2017-04-29 15:29:49 +03:00
Scott Lahteine
12ce051b55
Add a function to output spaces to serial
2017-04-29 15:29:49 +03:00
Scott Lahteine
42f4c53254
Starting on G33 rewrite
2017-04-29 15:29:49 +03:00
Scott Lahteine
baf3b91460
DELTA_TOWER_ANGLE_TRIM only needs AB
2017-04-29 15:29:49 +03:00
emartinez167
27cd165adf
Last three Spanish language strings
...
Updates as per @thinkyhead request.
2017-04-29 11:33:30 +08:00
Scott Lahteine
2cc9774f34
Apply bltouch_menu
...
As proffered in #6252
2017-04-28 18:43:03 -05:00
Scott Lahteine
1a111180de
Clean up set_heaters_for_bltouch
2017-04-28 18:32:39 -05:00
Scott Lahteine
7db805930a
Cleanup configurations
2017-04-28 18:32:39 -05:00
Scott Lahteine
8bf3a3fcdb
Remove inaccurate comments from ubl.h
2017-04-28 18:32:38 -05:00
Scott Lahteine
47557d5a19
Fix up formatting in ubl.h
2017-04-28 18:32:38 -05:00
Scott Lahteine
0a8e09c723
Clean up excess whitespace, comment formatting
2017-04-28 18:32:38 -05:00
Scott Lahteine
a35c681453
Clean up least_squares_fit
2017-04-28 17:33:28 -05:00
Bob-the-Kuhn
40089249c3
add PIN_EXISTS to HAS_xyz_MIN macro
2017-04-28 16:47:59 -05:00
Scott Lahteine
8020069371
Apply coding standards for indentation
2017-04-28 15:43:06 -05:00
Scott Lahteine
dabca83742
Merge pull request #6437 from Kaibob2/patch-1
...
Update language_de.h
2017-04-28 14:47:47 -05:00
Kai
3d0a4c4ea9
Update language_de.h
2017-04-28 21:09:10 +02:00
Silvio
6bf1d50188
Added missing translations ( #6458 )
2017-04-28 13:49:16 -05:00
Mehmet Sutas
404f767d44
Update language_tr.h ( #6463 )
2017-04-28 13:48:31 -05:00
Petr Zahradnik
5e701524f8
Update language_cz.h for new translations ( #6465 )
...
* Update language_cz.h for new translations
* Correction translate
* Revert correction back to hotend
2017-04-28 13:47:43 -05:00
gege2b
0a92ce7a98
Completed french translation ( #6475 )
2017-04-28 13:46:09 -05:00
Ernesto Martinez
ff4fb42e7d
Add new strings as per recent changes in RCBugFix ( #6482 )
...
Adding missing strings to Spanish language, as per changes recently
done to the RCBugFix branch.
2017-04-28 13:45:22 -05:00
paulusjacobus
67d1fc5556
Update language_nl.h ( #6478 )
...
updated the RCbugfix release with additional Dutch translations
2017-04-28 13:42:39 -05:00
benlye
8c6b4537a6
Fix issue in itostr4sign with numbers <100 ( #6487 )
...
The first character in the string wasn't blanked if the number went from >= 100 to <100, resulting in artefacts in the displayed string.
2017-04-28 13:35:11 -05:00
LVD-AC
4ea8d0f89b
Solved "The Travis CI build failed "
2017-04-28 19:55:21 +03:00
LVD-AC
ed6b361e27
cleanup ready to squash
2017-04-28 18:09:18 +03:00
LVD-AC
7a6a1ef583
M666 normalize positive values to <=0
...
M666
+ tower radians absolute value
2017-04-28 18:05:24 +03:00
Roxy-3D
4075b95519
Allow BL-Touch users to control heaters during probe event ( #6485 )
...
The Configuration.h file entries for BL-Touch have been updated to:
```cpp
//#define BLTOUCH
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are
turned off during probe event
```
2017-04-28 09:19:55 -05:00
Roxy-3D
6e8ecb908a
Shut down heaters during BL-Touch probe event
...
The electro-magnetic interference from the bed and nozzle are affecting
the BL-Touch repeatability for some users. This problem can be helped
by shutting down the heaters during the actual probe event and then
quickly turning them back on.
Because this code is messing with the heaters, it is written in a
paranoid manner. It only turns the heaters back on if everything is
EXACTLY as it expects things to be. The BL-Touch probe must have been
put into a deployed state less than 20 seconds prior, or the stow()
function will NOT turn the heaters on.
This code has been tested and works for both G28 and probing functions.
2017-04-27 18:52:58 -05:00
LVD-AC
d8102aeca8
Cn negative : no tower angle calibration
...
Giving a negative number of probe points disables the tower angle
correction calibration ('4point' instead of '7point' solution)
EEPROM version updated
2017-04-27 21:13:07 +03:00
Roxy-3D
3601f08e87
Better tuned FolgerTech i3-2020 example file
2017-04-27 11:16:38 -05:00
Roxy-3D
a20b7d9581
Better tuned Example file for FolgerTech i3-2020
...
Also setting up Z-Probe on the machine.
2017-04-27 11:16:38 -05:00
Kai
bf2fe46062
Update language_de.h
2017-04-27 10:13:02 +02:00
Kai
11d34be060
Update language_de.h
2017-04-27 10:06:26 +02:00
Scott Lahteine
817ecb9ff4
Merge pull request #6453 from thinkyhead/rc_cleanup_wednesday
...
Minor cleanups, work-in-progress
2017-04-26 19:41:52 -05:00
Roxy-3D
22f6e277af
Get example files fully into compliance
...
Change to support new name GRID_MAX_POINTS_XY
Start UBL at version 1.0 in the CUSTOM_MACHINE_NAME
2017-04-26 16:22:17 -05:00
LVD-AC
a9bc1d30cc
z_offset change
...
Avoids to have to recalibrate the delta_height after a z_offset change
2017-04-26 21:57:11 +03:00
Roxy-3D
ec26e23e7e
Add my two 'Nice' machines as example configurations
...
These are my two 'Nice' machines. Both are good example machines. The
FolgerTech i3-2020 is probably the best value kit on the market right
now. And it has developed a 'Cult Following' of hobbiests. I'll always
have an up to date Configuration.h file set for it, so it may as well be
an example configuration.
And the gCreate gMax 1.5+ is the best printer I've ever seen that runs
Marlin. For sure, I'll always have up to the minute Configuration.h
files for this printer also. I've moved over to using the gMax as my
primary development machine for Marlin. So... Besides being a good
machine, it is a nice convienience for me to have this Configuration.h
file as an 'Example'.
2017-04-26 12:46:12 -05:00
Scott Lahteine
adb8e68592
Fix stuck "Print Aborted" LCD message
...
Fixes #6393
2017-04-26 06:24:23 -05:00
Scott Lahteine
096b927102
Minor optimization of FILAMENT_WIDTH_SENSOR
2017-04-26 06:24:23 -05:00
Scott Lahteine
5bdb0b567d
Cosmetic patches
2017-04-26 06:24:23 -05:00
Kai
38ae7f4238
Added more translation strings
...
There are some quite tricky ones which are hardly translateable.
Maybe @Sebastianv650 can review this
2017-04-26 11:58:11 +02:00
Scott Lahteine
4d96d3eab1
Bootscreen delay after clear, then set chars
...
Fixes #6426
2017-04-25 23:37:28 -05:00
Scott Lahteine
5512130d6c
Only set Compare Mode for channel A
...
Fixes #6445
2017-04-25 23:14:16 -05:00
Roxy-3D
d467e97679
Smart-Fill and Mesh-Tilting (both 3-point and grid) working!
...
Also... The memory corruption issue may be fixed. The GCC compiler
was inlining static functions and this caused the G29() stack frame to
become much larger than the AVR could handle.
2017-04-25 21:03:41 -05:00
Scott Lahteine
a699967ec8
Merge pull request #6443 from thinkyhead/rc_interrupt_fastio
...
Patch fastio.h with Timer 2 interrupt support
2017-04-24 20:09:41 -05:00
Scott Lahteine
2823bf0874
Update fastio.h with special handling for Timer 2
2017-04-24 16:58:22 -05:00
Scott Lahteine
fd535e111a
Fix up XYZ_CONSTS_FROM_CONFIG macro
2017-04-24 14:05:11 -05:00
Kai
03c2f756b9
Update language_de.h
2017-04-24 13:32:16 +02:00
LVD-AC
dcf30a69d6
Allowing #define DELTA_TOWER_ANGLE_TRIM[C_AXIS]
...
More consistent with M665 where C-value is allowed as well, then
normalized
2017-04-23 14:51:24 +03:00
Brian
f41fb2b635
Numerous UBL-related changes:
...
* relocated ubl state to config. store:
* removed a number of ubl state variables and padding which were largely unused - saved 58 bytes of both SRAM and EEPROM;
* modified ubl sanity_check - no longer checks removed state variables that were otherwise unused, where checking didn't seem to accomplish anything, ultimately;
* removed pre_initialized state, saving 64 bytes of SRAM;
* removed automatic saving of UBL state after UBL activation/deactivation;
* consolidated multiple GRID_MAX_POINTS_X/Y to 'Global Leveling' section of EEPROM;
* minor update to G29 Sx notes/instructions;
* renamed mesh load and save parameter to 'slot' from 'm' for clarity;
2017-04-22 18:44:39 -05:00
Brian
f1a4758cef
use progmem instead of sram for mesh_index_to_x/ypos array;
...
fix maximum mesh_index_ array size at 16 (15+1);
2017-04-22 18:34:49 -05:00
Scott Lahteine
87d240042a
Optimize number-to-string functions, no-fan display
2017-04-22 16:23:15 -05:00
Scott Lahteine
959566cf0a
Update note about M163 / M164
2017-04-22 16:23:15 -05:00
Scott Lahteine
830851df13
Spend some SRAM to optimize bilinear leveling
2017-04-22 16:19:31 -05:00
Scott Lahteine
091179d960
bed_level_grid => z_values (also *_virt array)
2017-04-22 16:19:31 -05:00
Scott Lahteine
23cdbbb2d3
Add a method to refresh bilinear bed level after a change
2017-04-22 16:19:30 -05:00
Scott Lahteine
ccda63c473
Drop the accessor form for LCD value editing
2017-04-22 16:19:30 -05:00
Scott Lahteine
10da175be5
Fix a pair of compiler complaints
2017-04-22 16:19:30 -05:00
Scott Lahteine
ff0018e287
Format hex values as uppercase
2017-04-21 21:42:41 -05:00
android444
77aa16005d
Polish font
...
Add polish font for GLCD displays only.
HD44780 work properly without polish character.
Update language_pl.h.
2017-04-21 21:42:41 -05:00
teemuatlut
244f67590e
Delta probe height bug solved
2017-04-22 02:23:56 +03:00
Hans Raaf
406a83ff2d
Fix for Meshpositions if printer has negative endstop positions
2017-04-22 00:16:16 +02:00
benlye
3ed737425d
Fix typo in new SET_COM macro
2017-04-21 15:08:18 -05:00
Brian
88649b06a6
use planner.z_fade_height, etc. instead of private, ubl-specific g29 fade height
2017-04-21 09:09:09 -05:00
LVD-AC
004928148c
Tower angles
...
Adding '7-point' tower angle correction calibration
2017-04-21 12:48:45 +03:00
LVD-AC
76ec7a0f80
Adding upto 7*7 probe grids
...
- adding Cn 5, 6 and 7
2017-04-21 11:58:39 +03:00
LVD-AC
d4f593d200
Delete 'expert level'
...
and getting rid off verbose level 3 and configuration_adv settings
2017-04-21 11:58:39 +03:00
LVD-AC
13c8493878
M665 rework and related issues (all delta's)
...
- Making M665 compatible with repetier (see
http://reprap.org/wiki/G_code#M665:_Set_delta_configuration )
- M665 B also sets the radius for manual calibration menu
- Converting tower ajustment definitions to arrays - tower angle
corrections compatible with Esher 3D wizzard
- Only tower angles need to be adjustable with M665 and stored to EEPROM
- tower radius and diag rod can be adjusted in the FW only with #define
2017-04-21 11:58:39 +03:00
Scott Lahteine
e0e069c6d8
Clean up trailing whitespace
2017-04-20 17:52:07 -05:00
Scott Lahteine
9b94210394
Bring FLSUN config more up to date
2017-04-20 17:52:06 -05:00
Scott Lahteine
b0aa256bc0
Updates for all configs
2017-04-20 17:52:05 -05:00
Scott Lahteine
ee46ce1743
Add and apply interrupt helper macros
2017-04-20 16:04:29 -05:00
Scott Lahteine
6131c62499
General cleanup
2017-04-20 16:04:29 -05:00
benlye
2c86dfd3b5
Fix compiler type conversion errors after LCD changes
2017-04-20 16:04:29 -05:00
Scott Lahteine
55f9e76610
Merge pull request #6367 from thinkyhead/rc_cleanup_followup
...
Cleanup after some direct commits
2017-04-20 15:13:24 -05:00
Scott Lahteine
d38a792a91
Merge pull request #6382 from MagoKimbra/fix_configuration_store
...
Fix double definition in configuration_store
2017-04-20 15:06:58 -05:00
Scott Lahteine
b98bc034ae
Replace c_assert hack with static_assert
2017-04-19 13:07:35 -05:00
Scott Lahteine
5eb2b1a790
Clear up G29 compiler warnings
2017-04-19 13:07:35 -05:00
Scott Lahteine
4ce2a63db0
Apply const, spacing to Marlin_main.cpp
2017-04-19 13:07:34 -05:00
Scott Lahteine
e97f1284c1
Cleanup of pins testing code
2017-04-19 13:07:34 -05:00
Scott Lahteine
e9b53ae00c
Cleanup after some direct commits
...
https://github.com/MarlinFirmware/Marlin/commit/5e9726530ff21d3bc62beaa6
ac1b9437c276130a
2017-04-19 13:07:34 -05:00
Scott Lahteine
e05d050a1e
Add hex routine to print an address
2017-04-19 13:07:34 -05:00
Scott Lahteine
4542282f5e
Fix broken TOGGLE macro in fastio.h
2017-04-19 12:38:13 -05:00
MagoKimbra
ed52275a14
Fix double definition in configuration_store
2017-04-18 17:57:40 +02:00
Scott Lahteine
de569e3d4e
Merge pull request #6327 from Bob-the-Kuhn/M43-toggle-&-Z-probe-fixes
...
M43 Toggle & Z servo test - fix bug & add another check
2017-04-18 03:21:57 -05:00
Scott Lahteine
f33a650ecc
Merge pull request #6368 from thinkyhead/rc_linear_advance_eeprom
...
Add Linear Advance values to EEPROM and LCD
2017-04-18 02:54:12 -05:00
Scott Lahteine
a00ae4790a
Replace M905 with unique code M900
2017-04-17 16:39:37 -05:00
Scott Lahteine
1286d9603d
Clean up and organize ultralcd.cpp
2017-04-17 16:39:36 -05:00
Scott Lahteine
3cdf78a79f
MSG_VOLUMETRIC => MSG_FILAMENT
2017-04-17 16:39:36 -05:00
Thomas Moore
f8e77d6545
Add Linear Advance values to EEPROM and enable configuration of K via LCD
2017-04-17 16:39:36 -05:00
Scott Lahteine
eb2d073dae
Add M905 R for setting the E/D ratio directly
2017-04-17 16:39:36 -05:00
Scott Lahteine
69dfa54a84
Use code_value_linear_units for known-linear axes
2017-04-17 16:39:36 -05:00
Scott Lahteine
b956f2642b
Show M503 report with current linear units
2017-04-17 16:39:36 -05:00
Scott Lahteine
ba4a005ceb
Merge pull request #6373 from mtowara/mt_makefile_fix
...
Fix Makefile build
2017-04-17 16:16:37 -05:00
towara
150b15c311
fix compiler errors generated by more stringent flags in Makefile:
...
- use volatile for registers
- avoid implicit casts
2017-04-17 11:59:47 +02:00
towara
f6095c9325
fix missing serial.cpp in Makefile
2017-04-17 11:59:03 +02:00
Scott Lahteine
871f92378c
Tweak headings in EEPROM structure
2017-04-16 18:42:33 -05:00
Scott Lahteine
bf2548be4a
Merge pull request #6362 from tcm0116/babystepping
...
Only queue babysteps if axis is in a known position
2017-04-16 17:46:06 -05:00
dot-bob
9c410ddf68
Fixed an issue where a display with a hardware reset pin (LCD_RESET) may not get initialized properly.
2017-04-15 22:45:15 -06:00
Thomas Moore
72a7fac461
Only queue babysteps if axis is in a known position
2017-04-15 23:19:43 -05:00
Roxy-3D
5e9726530f
Setup to find data corruption and general clean up
...
This data corruption problem is very difficult. Just changing the code
a little bit changes whether the problem even happens and what is
affected. I need these changes in the main branch so I can operate with
the extra debug code always available and turned on.
Everything is setup such that if M100 is turned off or DEBUG(ECHO) is
turned off, the code is not affected. M100 has been made a little bit
more inteligent so it can display the serial command buffers in a more
meaningful way (because the data corruption seems to often times end up
in that area).
2017-04-15 19:26:43 -05:00
Scott Lahteine
e519e95953
Merge pull request #6358 from thinkyhead/rc_doubleclick_fix
...
Show Cancel/Continue screen for ABL "Level Bed"
2017-04-15 17:25:37 -05:00
Scott Lahteine
a81606c680
Show Cancel/Continue screen for ABL "Level Bed"
2017-04-15 16:51:03 -05:00
Scott Lahteine
51021bc7b8
Merge pull request #6353 from thinkyhead/rc_endstop_coolness
...
Clean up endstop triggering code
2017-04-15 16:49:54 -05:00
Scott Lahteine
857dec0990
Merge pull request #6342 from benlye/benlye-fix-softspi
...
Fix softspi variant conditional for 1284p
2017-04-15 16:33:50 -05:00
Scott Lahteine
4e04383d18
Merge pull request #6354 from thinkyhead/rc_doubleclick_fix
...
Fix undefined symbol if DOUBLECLICK_FOR_Z_BABYSTEPPING and HAS_BED_PROBE defined
2017-04-15 16:06:29 -05:00
Thomas Moore
8dd0492e68
Show lcd_babystep_zoffset screen if DOUBLECLICK_FOR_Z_BABYSTEPPING is enabled and HAS_BED_PROBE is defined
2017-04-15 14:44:50 -05:00
benlye
0a2f60fab4
Make spi.h inclusion conditional
...
spi.h is only needed if HEATER_0_USES_MAX6675 is defined, so making its inclusion conditional on HEATER_0_USES_MAX6675 being defined.
2017-04-15 16:22:42 +01:00
Bob-the-Kuhn
60471b7592
minor improvements
...
Configuration_store.cpp - changed a couple of print statements so the
values were printed. The old method resulted in the formula being
printed.
ubl_G29
1) added support for R option to P4. Now probes all points unless R is
present and the number is greater than 0.
2) P2 - moved map print statement so it showed the point that was
currently being probed, The old location did this only for the first
point.
3) P4 - Moved the map print for the same reason.
ultralcd.cpp - changed "Mesh Editor :" to "Mesh Editor" because the LCD
draw routine puts a ":" in automatically so you end up with an extra ":"
using the old message.
2017-04-15 09:31:55 -05:00
Scott Lahteine
25a61e9061
Improve motion-based endstop triggering code
2017-04-15 06:16:50 -05:00
Scott Lahteine
a2356c2825
Fix compiler warning about z-offset callback
2017-04-15 02:50:27 -05:00
Scott Lahteine
037c964d26
Reverse bools on prepare_move sub-functions
2017-04-15 01:08:19 -05:00
Scott Lahteine
d9c4333806
Extra logging of Dual X modes
2017-04-15 01:08:19 -05:00
Scott Lahteine
4067d15c92
Cleanup, extend TMC2130 implementation
2017-04-14 23:00:00 -05:00
Scott Lahteine
d60c02c5b1
Cleanup, extend TMC2130 configuration
2017-04-14 22:43:56 -05:00
Scott Lahteine
0e97b3d6d0
Fix some configuration spacing
2017-04-14 22:36:10 -05:00
Scott Lahteine
cf6f483378
Merge pull request #6187 from thinkyhead/rc_flsun_delta_autocal
...
Delta: DELTA_HEIGHT, G33 Auto-Calibrate, drop M206/M428, add M665 H
2017-04-14 22:32:12 -05:00
Scott Lahteine
24882adfbf
Allow NO_WORKSPACE_OFFSETS with DELTA_AUTO_CALIBRATION
...
- On `DELTA` the `M665 H` option supplants `M206`
- On `DELTA` `NO_WORKSPACE_OFFSETS` only reverts `G92` behavior
- Spawn 4 conditionals based on `NO_WORKSPACE_OFFSETS`
- Optimize coordinate space conversion for `DELTA` workspace
- To keep EEPROM version, retain `home_offset[XYZ]`, just ignore XY
2017-04-14 21:56:49 -05:00
Bob-the-Kuhn
1acb84ba02
fix 1 bug, add error messages
...
===============================================
make changes requested by reviewers
===============================================
add M43 test to Travis, fix EOL, remove trailing spaces
2017-04-14 20:57:45 -05:00
LVD-AC
8821963873
Implement delta auto-calibration and delta_height
2017-04-14 19:46:31 -05:00
Scott Lahteine
b305699046
Merge pull request #6341 from benlye/benlye-lcd_babystep_zoffset
...
Fix lcd_babystep_zoffset()
2017-04-14 19:11:46 -05:00
LVD-AC
03bda24d19
Add delta auto-calibration and configuration for Flsun AC
2017-04-14 19:08:14 -05:00
Scott Lahteine
1bd25fd2b3
Clean up config spacing, section headings, etc.
2017-04-14 19:06:31 -05:00
Scott Lahteine
153b0ae967
Tweak Delta Printer configuration note
2017-04-14 19:06:06 -05:00
Scott Lahteine
81ffd98dd9
Allow faux leveling
2017-04-14 19:06:06 -05:00
Scott Lahteine
2355d87e11
Merge pull request #6346 from thinkyhead/rc_broken_abl_test
...
Add support for SOLENOID_PROBE
2017-04-14 18:36:32 -05:00
Scott Lahteine
f4685c28b7
Reorder Conditionals_post.h and add comments
2017-04-14 18:18:21 -05:00
Scott Lahteine
0ac2b5c045
Additional 5 extruders support (solenoids, microstepping)
2017-04-14 18:18:20 -05:00
Scott Lahteine
fd2a0784ba
Add support for SOLENOID_PROBE
2017-04-14 17:24:36 -05:00
Scott Lahteine
5803ba43a9
Expose EXT_SOLENOID as an advanced option
2017-04-14 17:24:36 -05:00
Scott Lahteine
ea734f910b
Use direct pin manipulation whenever possible
2017-04-14 16:55:35 -05:00
Scott Lahteine
19d0c6a0c0
Patch to init W with RGBW_LED
2017-04-14 16:55:23 -05:00
Scott Lahteine
3e079660b0
Never define SLED_PIN
2017-04-14 16:36:32 -05:00
benlye
1a447d0047
Fix variant conditional for 1284p
2017-04-14 18:46:09 +01:00
benlye
1f9ee42750
Fix lcd_babystep_zoffset()
...
Resolve 'steps_to_mm was not declared in this scope' compilation error after recent changes to merge babystepping with M851
2017-04-14 18:38:35 +01:00
Bob-the-Kuhn
445d39e95a
CORExx endstop detection fixes
...
1. The CORExx printers were checking more endstop axis than needed.
2. Removed all the CORE_xx_NOT logic. The motor_direction(xx) routine
always returns the correct data so it is not needed. It was actually
cause the wrong direction to be checked in some cases.
3. Made the logic/defines for X, Y & Z axis all the same. The old logic
checked inappropriate configurations for Y and didn't check all the
correct configurations on Z.
4. Added a check for zero steps before the X, Y & Z axis. Previously
would check the they axis even if there were no movement.
2017-04-13 21:43:37 -05:00
Roxy-3D
28fec61f92
M100 Fixes and Features
...
All the memory accesses need to be unsigned char in order to avoid
false errors being detected. Two new features are available for
developers to call into the M100 functionality to look for data
corruption.
2017-04-13 18:20:53 -05:00
Scott Lahteine
52c3ace102
Add BABYSTEP_ZPROBE_OFFSET as an optional feature
2017-04-13 16:29:43 -05:00
Scott Lahteine
cd4e6abec8
Group BABYSTEPPING options together
2017-04-13 16:26:45 -05:00
Scott Lahteine
60ac41a32c
Add code to handle changes to zprobe_zoffset
2017-04-13 15:46:35 -05:00
Scott Lahteine
8fa4209916
Movement/adjustment should be reverse of probe offset change
2017-04-13 15:46:05 -05:00
Thomas Moore
361655828f
Use babystepping to adjust bed probe z-offset
2017-04-13 15:46:05 -05:00
Scott Lahteine
36e5c7c389
Merge pull request #6330 from thinkyhead/rc_improvements
...
Sanity check per-axis options' array sizes
2017-04-13 13:08:44 -05:00
Scott Lahteine
02fca543bb
Merge pull request #6272 from thinkyhead/rc_adc_variable_rate
...
Make ADC sensor reading frequency adjustable
2017-04-13 12:49:31 -05:00
Scott Lahteine
34308368c0
Sanity check per-axis settings for size
2017-04-13 11:35:20 -05:00
Scott Lahteine
ac96ae89f9
Apply const
in Stepper::isr
2017-04-13 06:20:36 -05:00
Scott Lahteine
2fa1e882d0
Merge pull request #6325 from thinkyhead/rc_M20_with_size
...
Simplified M20 with size
2017-04-13 05:06:52 -05:00
Bob-the-Kuhn
1b12fea0fa
simplified M20 with size
2017-04-13 04:56:58 -05:00
Scott Lahteine
4022b971db
Merge pull request #6315 from thinkyhead/rc_unify_M421
...
Unify M421
2017-04-12 19:43:28 -05:00
Scott Lahteine
b236562354
Merge pull request #6306 from thinkyhead/cleanup_after_6302
...
Adjustments to M100
2017-04-12 19:12:27 -05:00
Scott Lahteine
5e4f4d387f
Swap MBL z_values dimensions to [X][Y]
2017-04-12 17:24:05 -05:00
Scott Lahteine
063f641651
Unify M421
2017-04-11 15:46:13 -05:00
Scott Lahteine
6d5400dc31
Merge pull request #6240 from thinkyhead/rebuild_rgb_led
...
Extend RGB LED with Printer Events
2017-04-11 15:16:57 -05:00
Scott Lahteine
dac21ec680
Add support for an RGBW LED
2017-04-11 12:58:55 -05:00
Scott Lahteine
e7746ffee4
Extend RGB LED support, adding Printer Events
2017-04-11 12:15:41 -05:00
Scott Lahteine
c7063eb55c
theTarget => target_temp
2017-04-11 12:15:41 -05:00
Scott Lahteine
36bda2bade
Add HAS_RESUME_CONTINUE shorthand macro
2017-04-11 12:15:40 -05:00
Scott Lahteine
53e6c33c37
2 is DXC_DUPLICATION_MODE
2017-04-11 12:15:40 -05:00
Scott Lahteine
a2cb0a3d54
Use multiply for delta probe constraint
2017-04-11 12:15:40 -05:00
Scott Lahteine
6487c96a4a
Merge pull request #6313 from Kaibob2/patch-10
...
Allow 10mm Movements for Z-Axis
2017-04-11 12:04:10 -05:00
Kai
001bc14255
Allow 10mm Movements for Z-Axis
...
I use the movement options via LCD quite often. Especially to get the nozzle out of the way. I see no reason, why the 10mm option is disabled for the Z-Axis, this is why i always delete this line when i compile a new version.
If this is unwanted, please just close this PR
2017-04-11 18:39:26 +02:00
Scott Lahteine
6a9b008044
Fix MINIMUM_STEPPER_PULSE maths
2017-04-11 11:11:17 -05:00
Scott Lahteine
68773f4486
Simplify stepper macros by renaming enable/disable macros
2017-04-11 11:10:26 -05:00
Scott Lahteine
e02a5a6371
Add macros for delays by machine cycle
2017-04-11 09:18:32 -05:00
Scott Lahteine
ecc537015a
Have M109 / M190 do nothing with no parameters
2017-04-11 05:06:25 -05:00
Scott Lahteine
03aa9a390e
Apply coding standards to M100, break up into functions
2017-04-10 21:09:43 -05:00
Scott Lahteine
48c16fc6ef
Merge pull request #6307 from thinkyhead/rc_less_no_reentrance
...
Only lcd_synchronize needs no_reentry
2017-04-10 20:58:32 -05:00
Scott Lahteine
4fcfe926d6
Only lcd_synchronize needs no_reentry
2017-04-10 20:13:23 -05:00
Scott Lahteine
67fb7f82ac
Merge pull request #6283 from thinkyhead/rc_eeprom_z_fade
...
Save / restore z_fade_height in EEPROM
2017-04-10 20:05:20 -05:00
Scott Lahteine
eff5af569b
Merge pull request #6300 from MagoKimbra/rc_fix_mesh_report
...
Fix mbl_mesh_report
2017-04-10 19:37:19 -05:00
Scott Lahteine
4a18968c10
Merge pull request #6297 from Kaibob2/patch-9
...
Fix EPROM -> EEPROM
2017-04-10 19:35:30 -05:00
Roxy-3D
ba85faabc0
Fix M100 Free Memory Checker
...
M100 had numerious changes and quit working. Part of the problem is
the overloading of the SERIAL_PROTOCOL functions. Also, some of the
address arithmatic was changed to use char *ptr and passing ptr into the
SERIAL_PROTOCOL functions caused them to try to print a string instead
of a number. M100 is working again. Let's keep it that way!
M100 has been expanded to now have a function int
free_memory_is_corrupted() that can be called from other code to see if
the free space is still contiguous. It may make sense to add a flag to
control its verbose nature but right now, the extra chit chat is very
helpful to know int free_memory_is_corrupted() is doing the right thing
and what it found at various points when it was called. A 'Show &
Tell' is coming up with int free_memory_is_corrupted().
2017-04-10 15:33:55 -05:00
Kai
3b82db5fe9
Missing semicolon in ultralcd.cpp
...
When PARK_HEAD_ON_PAUSE is defined Marlin won't compile because of two missing semicolon.
2017-04-10 14:45:51 -05:00
MagoKimbra
7d2e637867
Fix mbl_mesh_report
2017-04-10 20:50:19 +02:00
Kai
afeb0452ef
Fix EPROM -> EEPROM
...
These fixes are neede because before it showed the englisch text even if language = de was selected
2017-04-10 18:37:00 +02:00
Scott Lahteine
7f950a80c0
Make ADC sensor reading frequency adjustable
2017-04-09 22:18:21 -05:00
Scott Lahteine
786af73e24
Convert config code to a static class
2017-04-09 22:06:41 -05:00
james94jeans2
5b9476fe78
Added z_fade_height to EEPROM-Settings
...
Firmware was forgetting the z_fade_height in Planner, set by M420 Z<f>,
after each reset or loading settings from EEPROM. Added the float
z_fade_height to EEPROM-Storage, now remembers the value.
2017-04-09 21:16:58 -05:00
Scott Lahteine
9343f6a95f
Put TOSHIBA with other stepper driver options
2017-04-09 20:52:49 -05:00
Scott Lahteine
7a704af5e6
Merge pull request #6284 from thinkyhead/rc_wt150_rebase
...
wt150 (Mightyboard Rev E) & RRD Full Graphic Smart Controller
2017-04-09 20:27:44 -05:00
Max Matveev
2031fb913b
Fixed comparison of float values to NaN
2017-04-09 20:28:46 +02:00
Scott Lahteine
e48a52a530
Patch a display issue with LCD_DECIMAL_SMALL_XY
...
The `ftostr4sign` function got munged by the `WITHIN` patch
2017-04-09 10:25:35 -05:00
Scott Lahteine
1a3cd6a090
Merge pull request #6213 from thinkyhead/rc_gitattributes
...
Init bed_level_virt_interpolate on EEPROM load
2017-04-09 08:13:11 -05:00
Scott Lahteine
314a02e2d5
Toggle with XOR
2017-04-09 07:58:47 -05:00
Scott Lahteine
8bc0d90b00
Init bed_level_virt_interpolate on EEPROM load
2017-04-09 07:04:20 -05:00
MD
20dd5376b8
Cheaptronic V2
...
Add support for new electronics
www.reprapobchod.cz
2017-04-09 06:57:43 -05:00
Scott Lahteine
4cdda5615b
Bring other configs up to date with wt150 changes
2017-04-09 06:45:42 -05:00
Paweł Stawicki
9b0885f4f6
Allow boards without a thermistor
2017-04-09 06:45:41 -05:00
Paweł Stawicki
64cfcebe66
Update SlowSoftI2CMaster link. MightyBoard digipots I2C bus has no resistors.
2017-04-09 06:45:03 -05:00
Paweł Stawicki
0eb16d9ff7
Add example config for the wt150 printer with RepRapDiscount Full Graphic Smart Controller
2017-04-09 06:44:54 -05:00
Paweł Stawicki
652bedfa18
Add RepRapDiscount Full Graphic Smart Controller support to MIGHTYBOARD REVE
2017-04-09 06:44:53 -05:00
Paweł Stawicki
44cdebb8f1
Add software spi support for max6675
2017-04-09 06:44:53 -05:00
Paweł Stawicki
191fec009f
Add digipot i2c control for MCP4018
2017-04-09 06:44:53 -05:00
Scott Lahteine
e5b16081cb
Update TinyBoy2 configurations
2017-04-09 06:44:53 -05:00
Scott Lahteine
1855534f20
Config files cleanup
2017-04-09 06:44:52 -05:00
Scott Lahteine
c26a315d0b
Additional missed patches
2017-04-09 04:24:23 -05:00
Scott Lahteine
39617e10b8
Patch configs comment formatting
2017-04-09 03:49:16 -05:00
Scott Lahteine
c54f6cf23d
Updates to support 5 extruders
2017-04-09 03:49:16 -05:00
Scott Lahteine
2b88ccd0aa
Apply UBL mesh bounds to remaining configs
2017-04-09 03:49:15 -05:00
Scott Lahteine
60be3d264b
Macros to print floats, hiding imprecision
2017-04-09 03:48:40 -05:00
Scott Lahteine
b356d73239
Merge pull request #6278 from thinkyhead/pr_delta_angles
...
Followup to additional delta trim options
2017-04-08 22:25:57 -05:00
Jimmy Envall
f78d44e91a
Added support for delta tower angle corrections.
2017-04-08 21:13:44 -05:00
Scott Lahteine
d3b4d84586
Merge pull request #6277 from thinkyhead/pr_roxy3d_rcbugfix
...
Unify UBL Command Parsing
2017-04-08 20:17:46 -05:00
Scott Lahteine
d4ce839351
Cleanup following Pins Debug update
2017-04-08 18:59:57 -05:00
Scott Lahteine
c7a8f7970b
Formatting / cleanup
2017-04-08 18:59:57 -05:00
Scott Lahteine
29d4ec8257
Support 5 extruder auto fans
2017-04-08 18:59:57 -05:00
Scott Lahteine
824f3c1c0d
Fix up configuration comments
2017-04-08 18:59:56 -05:00
Scott Lahteine
995ed90248
Clean up Filament Width Sensor comments
2017-04-08 18:59:56 -05:00
Scott Lahteine
5a7b810fdd
General comment cleanup
2017-04-08 18:58:33 -05:00
Scott Lahteine
0027c22839
Drop extraneous calls to lcd_update
2017-04-08 18:58:33 -05:00
Scott Lahteine
d6db7a9b03
patch "step_remaining"
2017-04-08 18:13:20 -05:00
Scott Lahteine
cbc2331187
Use LCD_MESSAGEPGM over lcd_setstatuspgm
2017-04-08 18:04:39 -05:00
Scott Lahteine
3729510b1e
Set and check main parameter values, report all errors
2017-04-08 17:15:55 -05:00
Roxy-3D
34d3ed9ab1
These items were removed from the UBL Command Parsing
...
Having these items randomly (and errorniously) disappear cost me several
hours of work yesterday.
2017-04-08 15:30:20 -05:00
Scott Lahteine
15edb41cee
Patches to UBL
2017-04-08 14:59:14 -05:00
Roxy-3D
14cf527bb8
Getting setup for debugging
2017-04-08 14:59:14 -05:00
Scott Lahteine
f8408036f2
Merge pull request #6264 from thinkyhead/rc_five_extruders
...
Support up to 5 extruders in Marlin
2017-04-07 12:48:56 -05:00
Bob-the-Kuhn
f7fc49c3a3
Finish name change
...
DAC_STEPPER_DFLT wasn't changed to DAC_MOTOR_CURRENT_DEFAULT in all
places on PR #6124
2017-04-07 11:05:24 -05:00
Scott Lahteine
832064e4f2
Implementation changes to support 5 extruders
2017-04-07 10:46:37 -05:00
Scott Lahteine
04050237f0
Header and pins changes to support 5 extruders
2017-04-07 10:46:36 -05:00
Scott Lahteine
2a84122edd
Configuration changes to support 5 extruders
2017-04-07 10:46:35 -05:00
Scott Lahteine
edf18977c1
Patch pins files hotends/e-steppers sanity check
2017-04-07 10:46:33 -05:00
Scott Lahteine
dc84678fc1
Fix HOTEND_STATUS_ITEM for graphical display
2017-04-06 23:07:30 -05:00
Scott Lahteine
a0de5d94e2
Merge pull request #6258 from benlye/benlye-bilinearfix2
...
Better fix for bilinear Z offset and G29 Z (update to #6251 )
2017-04-06 20:51:57 -05:00
Scott Lahteine
b23aef5b8d
Merge pull request #6190 from Bob-the-Kuhn/Stop-and-Kill-prints---round-2
...
Message for every KILL and STOP (also need delays)
2017-04-06 20:40:12 -05:00
Roxy-3D
945303c0d5
eleminate bootscreen.h
2017-04-06 19:55:41 -05:00
Roxy-3D
ef3da3971e
Update ubl.h
2017-04-06 19:55:41 -05:00
Roxy-3D
8644dc170b
get synchronized to current file names
2017-04-06 19:55:41 -05:00
Roxy-3D
1451b7eacf
UBL's Grid Based Leveling code
...
Pretty much... The code is in place. Still more work to do. But it
has a lot of hooks and variables in other code, so commit and merge
before I pick up a million 'Conflicts'.
2017-04-06 19:55:41 -05:00
Bob-the-Kuhn
549055f20c
Merge pull request #6124 from Bob-the-Kuhn/MCP4728-consistency
...
MCP4728 consistency & fix ultralcd.cpp (PRINTRBOARD Rev F and RIGIDBOARD V2)
2017-04-06 16:35:50 -05:00
Bob-the-Kuhn
a77875c9d2
Merge pull request #6114 from Bob-the-Kuhn/try2-add-BLTouch-retry
...
Another BLTouch retry place (replaces PR #6108 )
2017-04-06 16:25:55 -05:00
Bob-the-Kuhn
3b9ff2cb12
Merge pull request #5676 from Bob-the-Kuhn/configuration.h
...
Configuration.h - reword Z PROBE section
2017-04-06 16:18:34 -05:00
Bob-the-Kuhn
6643d553f6
# This is a combination of 2 commits.
...
# This is the 1st commit message:
MCP4728 consistency & fix ultralcd.cpp
The MCP4728 DAC controls the stepper motor current strenth on the
PRINTRBOARD Rev F and RIGIDBOARD V2 boards.
PR #5792 on 9 FEB 2017 implemented default drive percentages but only on
the RIGIDBOARD V2.
This change moves the default settings to Configuration_adv.h.
Also, ultralcd.cpp won't compile because of a type def conflict.
Changed it to match the one in stepper_dac.cpp
===========================================================
reword stepper curent section for clarity
===========================================================
change name & improve comments
===========================================================
changed name from A4JP to SCOOVO_X9H per PR #6139
# This is the commit message #2 :
fix typo
2017-04-06 16:16:27 -05:00
Bob-the-Kuhn
a44b3432c1
add BLTouch retry to a second place & add/update delays
...
=================================================
implement requested changes
=================================================
remove delays (they're in another PR) & move return
2017-04-06 16:13:07 -05:00
Bob-the-Kuhn
a5abc61fb9
Merge pull request #6219 from Bob-the-Kuhn/Servo-probe-and-toggle-pins
...
M43 - add Toggle utility and Z servo utility (replaces PR #5864 )
2017-04-06 16:10:50 -05:00
Bob-the-Kuhn
3b8926bd09
improved wording, consolidation of info, BLTouch warning
...
==============================================
clarified BLTouch calculation & changed comment delimitters/flags
I found it hard to pickout the various sections in this area so I
changed most comments from // style to /** ... */
Made the BLTouch calculation simpler and clarified the units of measure
for the result.
============================================
add changes to example configurations
============================================
add TinyBoy2 to this PR & add BLTouch Delay
2017-04-06 16:06:01 -05:00
Scott Lahteine
55d296aaf0
pinsDebug with more features, uses less RAM
...
I've just uploaded a major change to pinsDebug.
The big change was creating an array in FLASH that contained every
active pin definition. That reduced the RAM memory usage considerably
but increased the FLASH usage.
Creating the array requires going through the pin list twice. Rather
than having two copies of it in the code I moved the list out to another
file (pinsDebug_list.h) and then just did two #includes.
From the user’s view they’ll see the following changes:
1. Now reports all the names assigned to a pin
2. The port is now reported in addition to the pin number.
3. When PWM0A & PWM1C share a pin, both PWMs are reported
4. More PWM/Timer info is reported
One new item that may cause some concern is the usage of the LINE
predefined preprocessor macro. It may not be available if the Arduino
IDE goes to a different compiler.
Includes support for 1284 & 1286 families.
Memory usage changes when enabling PINS_DEBUGGING:
ATmega2560
FLASH
. without 52576
. with new 64592
. with old 62826
. new-out 12016
. old-out 10250
. new-old 1766
.
RAM
. without 2807
. with new 2875
. with old 3545
. new-out 68
. old-out 738
. new-old -670
==================================================================
minor changes - mostly formatting
1) added newline to end of teensyduino file
2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings
about redefining TEENSYDUINO
3) removed some trailing spaces
reduce PROGMEM size & update pin list
Reduced PROGMEM usage by
1) converting often used macro to a function
2) moved as much as possible into the function
This required creating two arrays of address pointers for the PWM
registers.
==================================================================
update with new M3, M4, M5 pin names
==================================================================
report I/O status for unused/unknown pins
2017-04-06 16:06:01 -05:00
Scott Lahteine
e116723b8b
Adjust indentation in ubl.h
2017-04-06 16:06:00 -05:00
Scott Lahteine
1b3a26f2f5
Rename all UBL files with a ubl_ prefix
2017-04-06 16:06:00 -05:00
Scott Lahteine
d13991ae18
Use same config name for all mesh dimensions
2017-04-06 16:05:59 -05:00
Bob-the-Kuhn
f9686a108c
add Z servo test and toggle pins to M43
2017-04-06 15:59:38 -05:00
Scott Lahteine
62cbaa302e
Z_DUAL_ENDSTOP - make offset a configuration item
...
The offset for Z_DUAL_ENDSTOP (z_endstop_adj) is already in Marlin.
This PR just makes it a configuration item.
z_endstop_adj is initialized in two places so both had to be modified.
2017-04-06 15:57:10 -05:00
Scott Lahteine
c9e35004e7
pinsDebug with more features, uses less RAM
...
I've just uploaded a major change to pinsDebug.
The big change was creating an array in FLASH that contained every
active pin definition. That reduced the RAM memory usage considerably
but increased the FLASH usage.
Creating the array requires going through the pin list twice. Rather
than having two copies of it in the code I moved the list out to another
file (pinsDebug_list.h) and then just did two #includes.
From the user’s view they’ll see the following changes:
1. Now reports all the names assigned to a pin
2. The port is now reported in addition to the pin number.
3. When PWM0A & PWM1C share a pin, both PWMs are reported
4. More PWM/Timer info is reported
One new item that may cause some concern is the usage of the LINE
predefined preprocessor macro. It may not be available if the Arduino
IDE goes to a different compiler.
Includes support for 1284 & 1286 families.
Memory usage changes when enabling PINS_DEBUGGING:
ATmega2560
FLASH
. without 52576
. with new 64592
. with old 62826
. new-out 12016
. old-out 10250
. new-old 1766
.
RAM
. without 2807
. with new 2875
. with old 3545
. new-out 68
. old-out 738
. new-old -670
==================================================================
minor changes - mostly formatting
1) added newline to end of teensyduino file
2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings
about redefining TEENSYDUINO
3) removed some trailing spaces
reduce PROGMEM size & update pin list
Reduced PROGMEM usage by
1) converting often used macro to a function
2) moved as much as possible into the function
This required creating two arrays of address pointers for the PWM
registers.
==================================================================
update with new M3, M4, M5 pin names
==================================================================
report I/O status for unused/unknown pins
2017-04-06 14:46:28 -05:00
Scott Lahteine
4abd53f65a
Adjust indentation in ubl.h
2017-04-06 05:36:16 -05:00
Scott Lahteine
f5c5c1f771
Rename all UBL files with a ubl_ prefix
2017-04-06 05:33:27 -05:00
benlye
f1d50ac1dc
Fixing bilinear Z offset and G29 Z
...
The fix in #6251 for bilinear Z offset was flawed and broke the Z parameter of G29 for bilinear levelling. This is reverted and a different fix is used for the double-addition of the Z-probe offset to the bilinear correction grid.
2017-04-06 07:41:46 +01:00
Scott Lahteine
eb1e6aa29b
Use same config name for all mesh dimensions
2017-04-06 00:42:52 -05:00
Scott Lahteine
c961dd084d
Add hidden option to output Bilinear grids in JSON
2017-04-05 23:43:17 -05:00
Scott Lahteine
df7b4252fd
Reduce M420 code for UBL slightly
2017-04-05 22:30:29 -05:00
Scott Lahteine
8866158d03
Add LEVELING_DATA as a capability
2017-04-05 22:30:28 -05:00
benlye
0a2b4f3486
Fix bilinear levelling z offset
...
Since run_probe was altered to return the probe Z position rather than the nozzle Z position bilinear levelling has been broken because the Z-offset has been applied twice - once in the run_probe function, and then again in the G29 code for bilinear levelling.
2017-04-05 22:01:40 -05:00
Scott Lahteine
44a849bdce
Fix broken M206/M428/G92 offsets
2017-04-05 22:01:37 -05:00
Roxy-3D
52978e5ba5
Fix spelling mistake when UBL's mesh is Inactive
2017-04-02 20:07:09 -05:00
Roxy-3D
0423e93c42
Fix M421 AUTO_BED_LEVELING_BILINEAR and AUTO_BED_LEVELING_UBL
...
M421 was not connected up for AUTO_BED_LEVELING_BILINEAR.
M421 needed to migrate mesh data to new UBL EEPROM layout.
2017-04-02 16:46:37 -05:00
Scott Lahteine
3412950abc
Merge pull request #6209 from thinkyhead/rc_psu_zero
...
Power Supply 0 as "General"
2017-04-02 16:44:42 -05:00
Roxy-3D
3e9e94801f
Fix problem described in issue # 6175
...
As it turns out... an unsigned int can not go to less than 0, so the
loop never terminates.
2017-04-02 13:00:27 -05:00
Scott Lahteine
289e3d6844
Merge pull request #6215 from thinkyhead/rc_bed_false_alarm
...
Fix thermal runaway when nonexistent bed temp is set
2017-04-02 11:59:58 -05:00
Scott Lahteine
948728e63b
Fix line-endings in UBL_G29
2017-04-02 11:48:26 -05:00
Scott Lahteine
699310d1d2
Fix: Thermal runaway if nonexistent bed's temp is set
2017-04-02 11:48:10 -05:00
Scott Lahteine
c56eec29f0
Configurable delay for BLTouch servo emulation
2017-04-02 11:14:53 -05:00
Scott Lahteine
deaad78df9
Merge pull request #5678 from Bob-the-Kuhn/G38-optional-double-tap
...
G38 bug fix, made double touch optional & reverted to Z_MIN_PROBE
2017-04-02 10:32:04 -05:00
Scott Lahteine
5bce731962
Fix LCD preheat menus
2017-04-02 09:32:22 -05:00
Scott Lahteine
4c72167af3
Prevent a warning on echo_command
2017-04-02 08:36:58 -05:00
Scott Lahteine
9b5fd9522e
Fix formatting, order for a UBL change
2017-04-02 07:15:40 -05:00
Tannoo
54173c80ad
Power Supply 0 as "General"
2017-04-02 06:21:34 -05:00
Scott Lahteine
a2775d0c70
can wstring be removed?
2017-04-02 04:43:33 -05:00
Scott Lahteine
de4e19f17e
Patch MarlinSerial to match up with 32-bit version
2017-04-02 04:39:18 -05:00
Scott Lahteine
2cbc7b4b73
Relocate serial macros and functions
2017-04-02 01:05:25 -05:00
Scott Lahteine
eaa66f3c46
Indent MarlinSerial code
2017-04-02 01:05:25 -05:00
Scott Lahteine
7a7a80e6c5
status_printf => lcd_status_printf_P
2017-04-02 01:05:25 -05:00
Scott Lahteine
0e6ec34228
Use PSTR versions of lcd_status... to save SRAM
2017-04-02 00:45:39 -05:00
Scott Lahteine
34e2420b9b
Apply const args, clean up find_closest_circle_to_print
2017-04-01 23:15:41 -05:00
Scott Lahteine
e19fbd27ce
Minor spelling patch
2017-04-01 23:08:00 -05:00
Scott Lahteine
790a3e9a8c
Remove extraneous check of UBL_G26_MESH_EDITING
2017-04-01 23:03:40 -05:00
Scott Lahteine
7310110ec0
Fix logic of UBL::fade_scaling_factor_for_z
2017-04-01 22:52:48 -05:00
Scott Lahteine
1a775cecac
Revert behavior of enqueue_and_echo_commands_P
2017-04-01 21:53:46 -05:00
Scott Lahteine
79d42d87c1
Syntax cleanup
2017-04-01 21:53:46 -05:00
Scott Lahteine
b47fd31c37
Revert some changes to UBL
2017-04-01 21:53:45 -05:00
Bob-the-Kuhn
185337e787
add delays to allow stop & kill messages to get out
2017-04-01 00:23:14 -05:00
Scott Lahteine
63abb65146
Update description of PINS_DEBUGGING
2017-03-31 18:57:48 -05:00
Scott Lahteine
73e193da1d
Implement LCD_BED_LEVELING for PROBE_MANUALLY
2017-03-31 11:50:18 -05:00
Scott Lahteine
fcadc7bb1a
Implement the "manual" option for ABL
2017-03-31 11:50:18 -05:00
Scott Lahteine
9e22184936
Add a "manual" option for ABL
2017-03-31 11:50:18 -05:00
Scott Lahteine
541165e878
Merge pull request #6181 from thinkyhead/rc_ubl_further_fixes
...
Further adjustments to UBL code
2017-03-31 11:35:02 -05:00
Scott Lahteine
b19a15fa7f
Within applied to UBL
2017-03-31 11:12:57 -05:00
Scott Lahteine
342ee458ae
Additional UBL fixes, optimizations
2017-03-31 11:12:57 -05:00
Scott Lahteine
a5e085cbea
Have run_probe() return probe Z, not nozzle Z
2017-03-31 09:27:49 -05:00
Scott Lahteine
4487d22d56
Apply FIXFLOAT macro
2017-03-31 09:27:48 -05:00
Scott Lahteine
6cac0f43eb
MBL fiddle
2017-03-31 09:27:48 -05:00
Scott Lahteine
25a6bfa7ed
Add and apply WITHIN macro
2017-03-31 09:27:48 -05:00
Scott Lahteine
81136c1e82
Merge pull request #6177 from thinkyhead/rc_tinyboy
...
Support for TinyBoy 2 3D printer (and its OLED display)
2017-03-31 04:31:47 -05:00
Scott Lahteine
93aad54dc1
Clean up code, remove _now command function
2017-03-31 04:17:31 -05:00
Stefan Brüns
6ba6c92a81
Add example configuration for TinyBoy L10/L16
...
The TB2 is a Indiegogo funded 3d printer. It uses a MKS SMELZI V1.0
main board (based on MELZI, i.e. Sanguinololu). I comes as a complete kit,
including display and panel.
Two variants exists, L10 and L16, with a height of 100 and 160 mm.
The heating function of the provided bed can enabled by soldering a
thermistor and some wires to it.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-31 04:05:35 -05:00
Stefan Brüns
0fe57ad4f5
Add Support TinyBoy2 OLED/Encoder panel
...
The OLED is driven by an SSD1306, connected to the board via
I2C, the rotary encoder is connected to 3 GPIO pins.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-31 04:05:34 -05:00
Scott Lahteine
65ca6472ba
Make G26 compatible with G92 and M206
2017-03-31 02:20:20 -05:00
Scott Lahteine
4902fd4e95
More data in UBL class, make it a static class
...
- Make all `unified_bed_leveling` data/methods static
- Move some UBL-related variables into the class
- Replace `map_[xy]_index_to_bed_location` with `mesh_index_to_[xy]pos`
2017-03-31 02:20:20 -05:00
Scott Lahteine
edbc024d76
Disable UBL_G26_MESH_EDITING by default
2017-03-31 02:20:20 -05:00
Scott Lahteine
9e4bd6b3b5
Further repairs to UBL, comments, spacing
2017-03-31 02:20:20 -05:00
Bob-the-Kuhn
f3618c3337
Reduce UBL RAM usage by making G26/G29 optional
2017-03-31 02:20:19 -05:00
Scott Lahteine
c9eb1d6ab7
Make MBL a static class, use lookup for index-to-point conversion
2017-03-31 01:28:07 -05:00
Scott Lahteine
de9d2cddc3
Merge pull request #6152 from thinkyhead/rc_cleanup_6150_etc
...
UBL cleanup, optimization
2017-03-30 17:40:29 -05:00
Scott Lahteine
9217e4b8ec
Various UBL cleanups and bug fixes
2017-03-30 17:09:49 -05:00
Scott Lahteine
9924199802
Merge pull request #5908 from thinkyhead/rc_fix_slowdown
...
General minor cleanup
2017-03-29 21:43:33 -05:00
Scott Lahteine
0e71e7b2fb
Cleanup to planner.cpp
2017-03-29 06:48:07 -05:00
Scott Lahteine
f105cad43c
Marlin: Slight cleanup to Marlin_main.cpp
2017-03-29 06:40:29 -05:00
Scott Lahteine
499f9e04e1
Marlin: Temperature soft-PWM cleanup
2017-03-29 06:37:27 -05:00
Scott Lahteine
7ddd94dc61
Merge pull request #5994 from StefanBruens/fix_Makefile_errors
...
Fix makefile errors, cleanup
2017-03-29 06:32:08 -05:00
Scott Lahteine
af09095f03
Merge pull request #6154 from thinkyhead/rc_fil_sensor_vs_sd
...
Show Filament Width on LCD when SD is disabled
2017-03-29 05:24:48 -05:00
Remo Kallio
d38b1bc4b1
Show filament width sensor values in LCD constantly if SD card support is not enabled.
2017-03-29 04:03:08 -05:00
Scott Lahteine
e3459ec178
Merge pull request #5989 from MagoKimbra/rc_fix_delta_angles
...
Fix delta_angles
2017-03-29 03:35:18 -05:00
Scott Lahteine
f49aec057f
Tweak "can not" => "can't" in RUMBA pins
2017-03-29 01:04:50 -05:00
Scott Lahteine
0a23a1bb3b
Dynamic feedrate on SCARA, converting target mm/s to deg/s
2017-03-28 17:21:07 -05:00
Roxy-3D
d8724bb546
Get G29's P1 (Automated Probing) working again.
...
Incorrect optimizations of data types and ternary operators caused some
issues.
2017-03-28 17:11:02 -05:00
Scott Lahteine
c7f6ee9c93
Board A4JP should be SCOOVO_X9H
2017-03-27 22:22:13 -05:00
Scott Lahteine
a9fc30ae2e
Use safe_delay to ensure watchdog reset
2017-03-26 23:49:56 -05:00
Roxy-3D
171904b6c7
Make G29 What command print reliably and fix G29 P1 bug Waldo found
2017-03-26 17:05:58 -05:00
Roxy-3D
9d3ac66f73
Map clean up of UBL
...
UBL's maps are cleaner. And with a 1 value, G29 O 1 will generate a
map suitable to be Cut & Pasted into Excel so a Suface Map can be
generated.
2017-03-25 18:55:05 -05:00
Roxy-3D
9a1949a91e
Cleaned up G26 ready to replace existing one at MarlinFirmware/Marlin
2017-03-25 10:15:40 -05:00
Roxy-3D
aec85ad45a
Start of process to get UBL running again.
...
The wait_for_user change totally broke UBL. But there is stuff wrong
now in the thermal code and/or LCD Panel code.
2017-03-24 18:38:27 -05:00
Scott Lahteine
b47eaf14ae
Merge pull request #6109 from thinkyhead/rc_soft_pwm_dither
...
PWM dithering followup
2017-03-24 18:21:07 -05:00
Scott Lahteine
34d1c41b5f
Merge pull request #6111 from benlye/benlye-patch-echo_command
...
Fix type conversion issue with echo_command
2017-03-24 17:57:28 -05:00
benlye
6a601aca35
Fix type conversion issue with echo_command
...
With the the current definition of echo_command I cannot compile RCBugFix (Arduino IDE 1.8.1) with the error "invalid conversion from 'const char*' to 'char*'". This change resolves that.
2017-03-24 17:23:02 +00:00
Scott Lahteine
009a6ddd39
Adjust bilinear grid in M851
2017-03-24 06:28:59 -05:00
Scott Lahteine
eab7854a73
Merge pull request #6074 from thinkyhead/rc_immediate_shove
...
Immediate commands take precedence
2017-03-24 05:52:27 -05:00
Stefan Brüns
5699e2b881
Add SOFT_PWM_DITHER to other configurations
2017-03-24 05:02:24 -05:00
Scott Lahteine
5a2abeca78
Merge pull request #6100 from thinkyhead/rc_soft_pwm_dither
...
Enhancement of PWM, with dithering
2017-03-24 04:57:40 -05:00
Scott Lahteine
043be2856b
Use "& 0x3F" instead of "% 64"
2017-03-24 04:13:50 -05:00
Stefan Brüns
6a040a6967
SOFT_PWM: Do not switch off heaters twice on pwm_count wraparound
...
After wraparound, pwm_count <= pwm_mask holds, thus soft_pwm_X <= pwm_count
guarantees soft_pwm_X < pwm_mask is true, and the heater will be switched
off in the first branch.
Do not evaluate the pwm conditions a second time, this reduces the
instruction count (4 instructions per PWM) and text size (6 byte).
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-24 04:13:50 -05:00
Stefan Brüns
0a74774af1
soft_pwm: avoid useless refetches of pwm_count
...
The compiler is not able to reuse the value of pwm_count, but reloads it
on every evaluation, if is stored in a static variable, as it cannot prove
it will be unchanged. A variable with local scope may not be modified from
the outside, so its value can be reused.
Doing so reduces text size and instruction count.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-24 04:13:50 -05:00
Stefan Brüns
35a55d5757
SOFT_PWM: Implement dithering if SOFT_PWM_SCALE is 1 or more
...
If dithering is enabled, the remainder of the soft_pwm_X duty value at
turnoff time is added to the next cycle. If e.g. the duty is set to 9 and
SCALE is set to 2, the PWM will be active for 8 counts for 3 cycles and
12 counts on each fourth cycle, i.e. the average is 9 cycles.
This compensates the resolution loss at higher scales and allows running
fans with SOFT_PWM with significantly reduced noise.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-24 04:13:36 -05:00
Stefan Brüns
2aed66a955
temperature: Fix SOFT_PWM off by one
...
A 128 step PWM has 127 intervals (0/127 ... 127/127 duty). Currently, a
PWM setting of 1/127 is active for 2/128, i.e. double the expected time,
or, in general n+1/128 instead of n/127.
Fixes issue#6003.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-24 04:13:36 -05:00
Scott Lahteine
b5711a99a2
Patches to bring UBL closer to compliance
2017-03-24 01:37:52 -05:00
Scott Lahteine
d076c1b604
Apply some general cleanup to code
2017-03-24 01:37:51 -05:00
Scott Lahteine
d1e6b0e21a
Reduce STEP_PULSE_CYCLES code slightly
2017-03-24 00:50:05 -05:00
Scott Lahteine
783338a0b8
Add UBL_MESH_EDIT_ENABLED to configs
2017-03-24 00:44:55 -05:00
Scott Lahteine
8d54ffbf05
Adjust vector_3 code with const, some optimization
2017-03-23 19:41:42 -05:00
Roxy-3D
8ee2612ebb
The hex nibble routine can print again!
...
The code to print a hex nibble got broke. SERIAL_ECHO( (char) ) isn't
suitable for its use.
2017-03-23 16:08:37 -05:00
Roxy-3D
b8e4a6970b
Get UBL up and running again
...
All the changes to get the code into compliance with Marlin coding
standards made UBL sick. This pretty much gets UBL back up and
running.
2017-03-23 16:08:37 -05:00
Roxy-3D
5de1da2b3c
Make UBL honor the #define ENABLE_LEVELING_FADE_HEIGHT option
2017-03-23 16:08:37 -05:00
Scott Lahteine
8f9face956
Merge pull request #6088 from rafaljot/patch-3
...
Update Marlin_main.cpp
2017-03-23 01:51:51 -05:00
Scott Lahteine
782634b6c9
Merge pull request #6081 from Sebastianv650/MIN_STEPPER_PULSE_for_Babystepping
...
Add MINIMUM_STEPPER_PULSE ability to babystepping
2017-03-22 21:57:36 -05:00
Scott Lahteine
af2ea23e9c
EXTRUDER_RUNOUT_PREVENT uses buffer_line_kinematic
2017-03-22 20:51:12 -05:00
Scott Lahteine
cd882b88db
#if defined => #ifdef / PIN_EXISTS
2017-03-22 20:51:11 -05:00
Scott Lahteine
e244399766
Additional cleanup of UBL code
2017-03-22 20:51:10 -05:00
Bob-the-Kuhn
0934563b97
G38 optional double touch
...
Made the double touch portion a conditional compile based on the
PROBE_DOUBLE_TOUCH flag.
==============================================
Bugfix
The current G38 only stopped a move if it involved the Z axis.
Moved all the G38 code to it's own section and put it where it would
always be executed no matter what axis was moving or if the endstop was
enabled.
Also added a comment to configuration_adv to alert the user the double
tap had to be turned on.
==============================================
Change G38 back to using Z_MIN_PROBE
There's no Z_MIN endstop if Z_DUAL_ENDSTOPS is enabled and you have them
set to the top of the gantry.
G38 started out as using the Z_MIN_PROBE pin. I don't remember why we
changed it to the Z_MIN endstop.
2017-03-22 15:08:49 -05:00
Scott Lahteine
cc3204509c
UBL patch from Bob-the-Kuhn
2017-03-22 07:54:20 -05:00
Scott Lahteine
b904b5ae8d
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
Sebastianv650
bf57eb2447
Protect Babystepping against other ISRs
...
Especialy against stepper ISR.
This is even more important when a minimum pulse width is set,
increasing the runtime of a babystep.
2017-03-21 18:05:44 +01:00
Sebastianv650
80830919dc
Add MINIMUM_STEPPER_PULSE ability to babystepping
2017-03-21 17:50:38 +01:00
rafaljot
6da949bbf0
Update Marlin_main.cpp
...
Sometimes after killing heaters are still on.
2017-03-21 15:06:01 +01:00
Roxy-3D
72f7b14e66
Make G29's Interactive Mesh Editor Work
2017-03-20 12:52:51 -05:00
Roxy-3D
3fd74b121f
Get G29's Interactive Mesh Editor running
...
G29 P4 R O should work now.
2017-03-20 12:52:51 -05:00
Roxy-3D
1d58558bec
Spelling fix
2017-03-20 12:52:51 -05:00
Scott Lahteine
2573f4dd05
Merge pull request #6052 from thinkyhead/rc_lift_on_pause
...
Add PARK_HEAD_ON_PAUSE feature / M125
2017-03-20 03:36:31 -05:00
Scott Lahteine
48c6284c91
Immediate commands take precedence
2017-03-19 21:50:48 -05:00
Roxy-3D
76c270fdf2
Allow FWRETRACT with UBL Enabled
...
The retraction flag in UBL's G26 was conflicting with the FWRETRACT option.
All fixed!
2017-03-19 15:43:12 -06:00
Roxy-3D
c377c59d47
Allow G29 P1 R to generate the mesh
...
Fix the logic change that happened when UBL got merged.
2017-03-19 15:13:33 -06:00
Scott Lahteine
ff0dd162b7
PARK_HEAD_ON_PAUSE implementation
2017-03-19 07:27:35 -05:00
Scott Lahteine
26473cab6d
Add PARK_HEAD_ON_PAUSE feature
2017-03-19 05:06:55 -05:00
Scott Lahteine
4cf51157b3
Use XYZE rather than NUM_AXIS
2017-03-19 01:14:39 -05:00
Scott Lahteine
4c7f14752a
Add disable_e_steppers function
2017-03-19 01:14:39 -05:00
Scott Lahteine
8eb29f91e6
Patch filament change options and beep code
2017-03-19 01:14:39 -05:00
Scott Lahteine
56c9dfc83b
Merge pull request #6066 from thinkyhead/rc_felix_fix
...
Update Felix config for UBL
2017-03-19 01:11:02 -05:00
Scott Lahteine
9b2b53f63a
Merge pull request #6042 from thinkyhead/rc_fix_toolchange_z
...
Move Z last in tool-change for SWITCHING_EXTRUDER
2017-03-19 00:34:41 -05:00
Scott Lahteine
f98fb6b38e
Update Felix config for UBL
2017-03-19 00:28:48 -05:00
Scott Lahteine
7cabe81373
Merge pull request #6057 from thinkyhead/rc_followup_6054
...
Followup 6054 with some cleanup
2017-03-18 13:49:20 -05:00
Scott Lahteine
4bca27ab89
Fix Kelvin conversion
...
Thanks to @ospalh -- #6056
2017-03-18 13:23:08 -05:00
Scott Lahteine
143ab8f329
Remove Roxy's personal configurations
2017-03-18 12:35:02 -05:00
Scott Lahteine
2512871a36
Patch configs UBL followup
2017-03-18 12:32:03 -05:00
Scott Lahteine
27b5666e15
Move Allen Key probe definition to the top
2017-03-18 12:27:37 -05:00
Scott Lahteine
77cf648ed3
Move menu selection past static items in 1 screen
2017-03-18 12:26:21 -05:00
Scott Lahteine
2c630a1b5c
Merge pull request #6054 from thinkyhead/rc_ubl_renewal
...
UBL for RCBugFix — cleanup, rebase, patch
2017-03-18 12:07:57 -05:00
Scott Lahteine
0492a3a8f1
Merge pull request #6027 from Bob-the-Kuhn/add_kill_info
...
Message for every KILL and STOP
2017-03-18 11:49:35 -05:00
Scott Lahteine
6618346148
Patches to work around "register spill" compiler bug
2017-03-18 11:35:21 -05:00
Scott Lahteine
be7dd90382
Add Thermistor 75: MGB18 silicon pad
2017-03-18 11:35:20 -05:00
Scott Lahteine
b0a9c82c31
Fix single-char echo and pinMode usage
2017-03-18 11:35:20 -05:00
Scott Lahteine
fb60aa3736
UBL implementation
2017-03-18 11:35:20 -05:00
Scott Lahteine
238b8fd2a3
UBL core and support files
2017-03-18 11:35:19 -05:00
Scott Lahteine
cf94688925
Univeral Bed Leveling - configuration
2017-03-18 11:35:19 -05:00
Scott Lahteine
03aa424ccb
Merge pull request #6053 from thinkyhead/rc_clean
...
Remove extraneous whitespace
2017-03-18 03:26:45 -05:00
Scott Lahteine
af644871bf
Merge pull request #6045 from thinkyhead/rc_remove_raw_kinematics
...
Remove delta optimization concepts… for now
2017-03-18 03:26:24 -05:00
Scott Lahteine
77491dd924
Remove extraneous whitespace
2017-03-18 03:17:39 -05:00
Scott Lahteine
b865b21d32
Can't use Z fade height with DELTA
2017-03-17 08:34:47 -05:00
Scott Lahteine
1e57b0c269
Remove delta interpolation concept
2017-03-17 06:32:11 -05:00
Scott Lahteine
e46898f8e5
Remove kinematic optimizations
2017-03-17 06:30:22 -05:00
Scott Lahteine
11f1fdfab4
_lcd_level_bed_position => manual_probe_index
2017-03-17 06:05:17 -05:00
Scott Lahteine
0e410c9dfd
Software endstop options as simple switches
2017-03-17 06:05:17 -05:00
Scott Lahteine
d01b915085
Implement soft_endstops_enabled for clamping
2017-03-17 06:05:17 -05:00
Scott Lahteine
e4649c9044
Add HAS_SOFTWARE_ENDSTOPS macro
2017-03-17 06:05:17 -05:00
Scott Lahteine
3e927ff204
Replace MBL Z hacking
2017-03-17 06:05:17 -05:00
Scott Lahteine
4e53124681
Merge pull request #6039 from Bob-the-Kuhn/M114-sync-with-stepper
...
M114 - wait for move completion before reporting position
2017-03-17 05:22:46 -05:00
Scott Lahteine
734f9ea133
Merge pull request #6040 from thinkyhead/rc_sanity_use_assert
...
Simplify some sanity checks with static_assert
2017-03-17 05:22:17 -05:00
Scott Lahteine
f02af83d42
Remove some extraneous spaces
2017-03-16 23:59:11 -05:00
Scott Lahteine
672e45652e
Improved solution to tool-change bug
2017-03-16 23:59:10 -05:00
Scott Lahteine
23f1cfb46f
Fix stuck CHDK pin as suggested in #6041
2017-03-16 21:49:39 -05:00
Scott Lahteine
0b22069e82
Merge pull request #6021 from Bob-the-Kuhn/BUG-FIX--Switching-extruder-tool-change-Z-height
...
Bug Fix: Switching extruder tool change leaves Z in wrong position
2017-03-16 21:15:20 -05:00
Scott Lahteine
e7e4500629
Simplify some sanity checks with static_assert
2017-03-16 16:31:34 -05:00
Bob-the-Kuhn
34ff0c3439
M114 - wait for move completion before reporting position
2017-03-16 15:10:45 -05:00
Bob-the-Kuhn
b31604a492
Message for every KILL and STOP
...
No more mystery halts & resets
Moved messages to language.h
Added current command to inactive timeout message
2017-03-15 21:05:11 -05:00
Kai
13b44d019b
Update language_de.h
...
Addition of missing strings to match language_en.h
2017-03-15 16:06:52 +01:00
Bob-the-Kuhn
685ed5393a
Bug Fix: Switching extruder tool change leaves Z in wrong position
...
The tool_change function saves the current_position to the destination
array soon after starting. Later in the switching extruder section, the
destination array is modified when moving the Z axis up & down. A later
section of tool_change moves the head back to the “original location”
using the destination array. This later section assumes that the
destination array hasn’t been modified.
The fix is to save the destination Z position and then restore it after
the Z movements have completed.
Going back to using the current_position array for the switching
extruder Z axis moves (and leaving the destination array untouched)
doesn’t fix the problem.
This bug was introduced by the “Make tool_change kinematic compatible”
commit # 847429eff4
which was merged on 10
Oct 2016 as part of PR 4982.
This bug was discovered in Issue 5966.
2017-03-14 02:36:24 -05:00
Scott Lahteine
51353f8fea
Merge pull request #6000 from trivalik/NoWorkspaceWarning
...
prevent warning with define of NO_WORKSPACE_OFFSETS
2017-03-12 00:00:51 -06:00
MagoKimbra
a4a9bd8bc9
Fix BUG set_position_mm
...
Set postion must have axis and not E_AXIS + active_extruder.
2017-03-11 14:13:39 +01:00
Trivalik
71ac6f9d42
prevent warning with define of NO_WORKSPACE_OFFSETS
2017-03-09 23:49:57 +01:00
Stefan Brüns
9ba6c051a1
Makefile: add nozzle.cpp too CXXSRC list
...
The file is required by the optional NOZZLE_PARK_FEATURE.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-09 03:08:49 +01:00
Stefan Brüns
9cc8d495b8
Makefile: remove no longer existing search paths
...
ArduinoAddons has been removed from Marlin, remove any references to it.
Replace HARDWARE_SRC and HARDWARE_DIR with its expanded equivalents.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-09 01:46:47 +01:00
Stefan Brüns
bf563e62c1
Makefile: add printcounter.cpp too CXXSRC list
...
The file is required by the optional PRINTCOUNTER feature.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-09 01:45:54 +01:00
Stefan Brüns
ddecc1441d
Makefile: Fix linker error
...
Instantiation of the static singleton instance thermalManager in general
requires locking, but we know its safe to do without.
Add -fno-threadsafe-statics to avoid using locking primitives, which
result in linking errors:
undefined reference to `__cxa_guard_acquire'
undefined reference to `__cxa_guard_release'
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-09 01:45:38 +01:00
MagoKimbra
37a26dfc09
Fix delta_angles
2017-03-08 09:23:30 +01:00
Scott Lahteine
2defb1d748
Use SET_INPUT_PULLUP where appropriate
2017-03-07 23:43:33 -06:00
Scott Lahteine
58b3e98878
Use arrays for delta tower parameters
2017-03-07 19:00:22 -06:00
Scott Lahteine
47242a40bb
Apply updated changes for delta_tower_angle_trim
2017-03-07 18:15:11 -06:00
Jimmy Envall
00b6b3da79
Added support for delta tower angle corrections.
2017-03-07 16:35:58 -06:00
Scott Lahteine
5a456c832a
Apply TMC2130 to example configurations
2017-03-07 04:22:06 -06:00
Scott Lahteine
45f949d833
TMC2130 Library: @teemuatlut replaces @makertum
2017-03-07 04:22:06 -06:00
Scott Lahteine
33f8a8a344
Merge pull request #5973 from thinkyhead/rc_circle_pattern
...
Add circle pattern to nozzle clean
2017-03-06 04:47:01 -06:00
Scott Lahteine
94b3e0a483
Merge pull request #5959 from benlye/benlye-fixm48
...
Remove extra carriage return in M48 V1 output
2017-03-06 04:24:28 -06:00
Scott Lahteine
a9a1971295
Merge pull request #5972 from thinkyhead/rc_cooldown_before
...
Fix preheat menu formatting
2017-03-06 03:21:29 -06:00
Scott Lahteine
6aa81255a9
Patch and clean up "flsun" kossel. Followup to #5911 .
2017-03-06 03:15:00 -06:00
Scott Lahteine
b2270b3f3e
Apply prior nozzle clean update
2017-03-06 03:14:59 -06:00
Marek Pikuła
7698c5617a
Added circle nozzle cleaning parameters to example configurations
2017-03-06 03:04:58 -06:00
Marek Pikuła
6836b94eea
Added circle pattern for nozzle cleaning feature
2017-03-06 03:03:00 -06:00
Scott Lahteine
3b75518ef6
Merge pull request #5911 from aphex3k/flsun_kossel_mini
...
Configuration.h and Configuration_adv.h for the kossel mini by flsun
2017-03-06 02:26:01 -06:00
Scott Lahteine
3830778852
Apply NO_WORKSPACE_OFFSETS to lcd menu
2017-03-06 02:21:42 -06:00
Scott Lahteine
7e3aab889d
Fix preheat menu formatting
2017-03-06 02:07:07 -06:00
Scott Lahteine
fea0d3f20f
Endstop and temp-isr general cleanup
2017-03-06 02:07:07 -06:00
Scott Lahteine
aef08e8780
Compact some macro substitutions
2017-03-06 02:07:07 -06:00
Scott Lahteine
2f620f86d9
Merge pull request #5970 from thinkyhead/rc_cooldown_before
...
Preheat Hotend Only menu items
2017-03-06 01:56:05 -06:00
Scott Lahteine
02de8e6f18
Merge pull request #5957 from MagoKimbra/rc_stepper_indirection_fix
...
Stepper indirection fix tmc driver
2017-03-06 01:16:40 -06:00
Scott Lahteine
6c5312559c
Menu item to preheat only the hotend
2017-03-06 01:14:54 -06:00
Scott Lahteine
9d0142e8ae
Move Change Filament above Cooldown
2017-03-06 01:13:12 -06:00
Scott Lahteine
0c55095c5e
Move Cooldown above Preheat
2017-03-06 01:13:12 -06:00
Scott Lahteine
c15c65f18a
Merge pull request #5971 from thinkyhead/rc_fix_e_factors
...
Patch DISTINCT_E_FACTORS bug
2017-03-06 01:11:17 -06:00
Scott Lahteine
bfb0007573
Patch DISTINCT_E_FACTORS bug
2017-03-05 23:19:31 -06:00
Scott Lahteine
be98016674
Merge pull request #5963 from thinkyhead/rc_no_offsets_optim
...
New option: NO_WORKSPACE_OFFSETS
2017-03-05 21:46:49 -06:00
Scott Lahteine
8e89a802f7
Document PROTOCOL_VERSION
2017-03-05 04:43:46 -06:00
Scott Lahteine
87b03b16bd
Use a macro for array copies
2017-03-05 04:43:46 -06:00
Scott Lahteine
e141f3a03f
Optimize coordinate transformation
...
Pre-compute the combined position shift and home offset to save a
single float fetch-and-add per conversion. Great for delta/scara and
bed leveling.
2017-03-05 04:43:16 -06:00
Scott Lahteine
5f7e85398b
Implement NO_WORKSPACE_OFFSETS
2017-03-05 04:43:15 -06:00
Scott Lahteine
05abe853f9
New option: NO_WORKSPACE_OFFSETS
2017-03-05 04:43:15 -06:00
Scott Lahteine
20addc6e32
Merge pull request #5955 from thinkyhead/rc_eeprom_fail_better
...
Display a message for EEPROM version mismatch
2017-03-04 17:15:07 -06:00
benlye
dead89062a
Update Marlin_main.cpp
...
Remove unnecessary line break from M48 V1 output.
2017-03-04 17:58:10 +00:00
MagoKimbra
ae277aebc6
Stepper indirection fix tmc driver
2017-03-04 12:17:39 +01:00
Scott Lahteine
8f4e4b1995
Display a message for EEPROM version mismatch
2017-03-04 01:20:36 -06:00
Scott Lahteine
177ad245f6
Merge pull request #5953 from thinkyhead/fix_fc_e_index
...
Fix submenu hotend status display
2017-03-04 00:12:29 -06:00
Scott Lahteine
cea3ea772c
Fix submenu hotend status display
2017-03-03 22:12:22 -06:00
Scott Lahteine
b27f69ba51
Merge pull request #5813 from thinkyhead/rc_fix_makrpanel
...
Fix MAKRPANEL assignments
2017-03-03 21:40:49 -06:00
Scott Lahteine
1ef6ccd919
Merge pull request #5951 from thinkyhead/rc_print_2d_array
...
Reduce code size (40b, or 166b with bilinear subdivision)
2017-03-03 21:27:44 -06:00
Scott Lahteine
53f5086905
Fix MAKRPANEL assignments
...
MAKRPANEL is a DOGLCD+ULTRA_LCD+NEWPANEL so customize its pins within
that block.
2017-03-03 21:22:21 -06:00
Scott Lahteine
98c7b682ca
General cleanup, const usage, var naming
2017-03-03 20:57:49 -06:00
jes
369bfc8a1e
Reduce code size (40b, or 166b with bilinear subdivision)
2017-03-03 20:36:32 -06:00
Scott Lahteine
0d13412105
Fix "Heating..." message
2017-03-03 12:12:51 -06:00
Scott Lahteine
5065636023
Merge pull request #5934 from thinkyhead/rc_advance_ed_ratio
...
LIN_ADVANCE: Fixed E/D ratio option
2017-03-03 03:24:41 -06:00
divendres
75ad82baab
Update Catalan language
2017-03-02 20:40:06 -06:00
Scott Lahteine
34253497d4
Babysteps code tweak
...
As suggested by https://github.com/MarlinFirmware/Marlin/pull/5887#issuecomment-283832163
2017-03-02 20:35:45 -06:00
Scott Lahteine
fb4aead2b1
Clean up and finish #5887
2017-03-02 20:16:29 -06:00
Scott Lahteine
b3e2bd6f29
Reduce E_D_ratio code
2017-03-02 01:00:37 -06:00
Sebastianv650
de6c40ed8f
Add option to fix E/D ratio
...
Work around for slicers producing buggy gcode.
2017-03-02 01:00:37 -06:00
Scott Lahteine
eeb490221f
Remove BEEPER_PIN override in pins_RIGIDBOARD.h
...
Resolves #5926 . This override is no longer needed since the RAMPS LCD controller pins were fixed.
2017-03-01 18:26:29 -06:00
Roxy-3D
11e892bd84
Merge pull request #5887 from Roxy-3D/RCBugFix
...
Double Click of Encoder Wheel Jumps to Z-BabyStepping
2017-03-01 17:15:02 -07:00
Scott Lahteine
cbeff12f8a
Merge pull request #5933 from teemuatlut/lcd_days_hours
...
Fix formatting of SD print time hours above one day
2017-03-01 15:44:10 -06:00
Scott Lahteine
8a4e9d08a3
Merge pull request #5931 from thinkyhead/rc_core_endstop_fix
...
Fix CoreYX / YZ / ZX endstop logic
2017-03-01 15:32:11 -06:00
teemuatlut
9175d16660
Fix formatting of print time hours above one day
2017-03-01 18:55:25 +02:00
Scott Lahteine
b6d9eb229f
Extend Core endstop commentary
2017-03-01 10:01:50 -06:00
Bob-the-Kuhn
c5e08e8761
CoreYX/YZ/ZX needs different endstop logic than CoreXY/YZ/XZ
...
In the endstop testing section, add the "reverse" logic in addition to "normal" core handling.
In CoreXY/YZ/XZ steppers rotating the same direction gives X movement. Opposing directions produces Y movement.
In CoreYX/ZY/ZX this is reversed. Same = Y, Opposite = X.
----
Fixes the issue where the Y endstop was being checked when moving in the X direction, etc.
2017-03-01 09:40:24 -06:00
Scott Lahteine
c759c26cca
Make LCD_TIMEOUT_TO_STATUS configurable
...
As suggested in
https://github.com/MarlinFirmware/Marlin/issues/5570#issuecomment-283059
065
2017-02-28 19:02:50 -06:00
Michael Henke
47729918fc
enable ENSURE_SMOOTH_MOVES
2017-02-27 20:42:49 -08:00
Michael Henke
330b981912
created Configuration.h and Configuration_adv.h for the kossel mini sold by flsun
2017-02-25 21:31:37 -08:00
Colin Gilgenbach
48b7e0f8d8
Nozzle Wipe Vertical Zig-Zag
...
- Add configuration support for zigzags in either the X or Y axis, for
wipe pads significantly longer in one dimension.
- Add configuration for default number of zig-zag triangles, vs. a
magic number in `Marlin_main.cpp`.
- Update description of auto nozzle wiping to match functionality
2017-02-25 21:52:43 -06:00
Scott Lahteine
f17b81b765
Add MAPPER_C2C3 to French language
2017-02-25 18:49:00 -06:00
Roxy-3D
7e607b06eb
Better comments on DOUBLE_CLICK_TIME_WINDOW
2017-02-23 13:13:57 -07:00
Scott Lahteine
34cba42104
Use PSTR for MSG_HEATING
2017-02-22 11:30:19 -06:00
Roxy-3D
584d147a02
fixup the indentation
2017-02-22 07:23:54 -07:00
Roxy-3D
e443e0e2a9
Fix scoping issues for double click to Z-Babystepping
2017-02-21 18:15:28 -07:00
Roxy-3D
17d1cd7c09
Double Click of Encoder Wheel Jumps to Z-BabyStepping
2017-02-21 18:08:19 -07:00
Roxy-3D
48d862377a
Double Click of Encoder Wheel Jumps to Z-BabyStepping
2017-02-21 18:04:31 -07:00
Scott Lahteine
cfdc189796
Merge pull request #5856 from thinkyhead/rc_fix_bad_comment
...
Remove non-applicable comment on MANUAL_Z_HOME_POS
2017-02-20 17:54:30 -06:00
dot-bob
cd68380ce6
Add status_printf to print messages to the lcd status line.
...
Also add a hotend indicator to the heating message displayed on the lcd status line.
2017-02-20 15:26:54 -06:00
Scott Lahteine
012aff6823
Merge pull request #5862 from thinkyhead/rc_fix_a_thing
...
Finish reducing of ABL_BILINEAR_SUBDIVISION
2017-02-18 21:36:28 -06:00
Scott Lahteine
b9187020c4
Finish reducing of ABL_BILINEAR_SUBDIVISION
2017-02-18 20:01:19 -06:00
Scott Lahteine
e282b72151
Remove non-applicable comment on MANUAL_Z_HOME_POS
2017-02-18 05:14:43 -06:00
Scott Lahteine
57f92a4632
Apply DISTINCT_E_FACTORS to sync_from_steppers
...
Followup to #5840
2017-02-18 04:36:41 -06:00
Scott Lahteine
4da8b1494b
Merge pull request #5854 from thinkyhead/rc_fixup_m600
...
M600 cleanup and bugfix
2017-02-18 04:27:13 -06:00
Scott Lahteine
dd02dba6e6
Merge pull request #5840 from MagoKimbra/rc_fix_lin_advanced_step_to_mm
...
Fix steps_to_mm for active extruders
2017-02-18 04:25:53 -06:00
Scott Lahteine
6e0b3fcc08
Optimize M600 heater status LCD items
2017-02-18 04:08:00 -06:00
Scott Lahteine
44b4e116bd
Commentary / style in gcode_M600
2017-02-18 04:08:00 -06:00
Scott Lahteine
561904345f
Tweak config ordering for M600
2017-02-18 00:01:31 -06:00
Scott Lahteine
284d6de9da
Remove some old code comments
2017-02-17 15:25:56 -06:00
MagoKimbra
3685224c1a
Fix steps_to_mm for active extruders
2017-02-15 21:45:39 +01:00
Scott Lahteine
4578c573fe
Pause the print job timer while in M600
2017-02-15 05:29:34 -06:00
Scott Lahteine
bfe6f71794
Simplify filament_change_beep function
2017-02-15 05:29:34 -06:00
Scott Lahteine
8289ea1316
Use a short name for the filament "endstop"
2017-02-15 05:29:34 -06:00
Scott Lahteine
d9dcef8a87
Spacing, coding standards
2017-02-15 05:29:34 -06:00
Scott Lahteine
931914e679
Apply M600 updates to all configs
2017-02-15 05:29:34 -06:00
Roxy-3D
8bf0b496b9
Improve M600 with timeout, wait for heatup.
2017-02-15 05:29:34 -06:00
Tannoo
c40fe2113c
Fix for broken MBL
...
LCD call was waiting forever, causing the system to hang.
2017-02-15 04:39:22 -06:00
Scott Lahteine
4d4745c0eb
Parenthesize some menu defines for safety
2017-02-14 23:12:27 -06:00
Scott Lahteine
47f9883b0f
Dynamic allocation for SDCARD_SORT_ALPHA
2017-02-14 21:37:25 -06:00
Scott Lahteine
a561bd5e3a
New feature: SDCARD_SORT_ALPHA
2017-02-14 21:37:24 -06:00
Scott Lahteine
c04d6b5aa6
Merge pull request #5829 from thinkyhead/rc_fix_isr_reentry
...
Combine fixes for LIN_ADVANCE and temperature ISR
2017-02-14 20:36:58 -06:00
Scott Lahteine
467f01435f
Merge pull request #5816 from thinkyhead/rc_abl_virt_reduce
...
Reduce memory use by ABL_BILINEAR_SUBDIVISION slightly
2017-02-14 08:41:44 -06:00
Scott Lahteine
97b6fb6381
Reduce / optimize LIN_ADVANCE code
2017-02-14 07:52:03 -06:00
Sebastianv650
271ced7341
Prevent re-entering of temperature ISR
...
If Marlin is inside the temperature ISR, the stepper ISR is enabled. If
a stepper event is now happening Marlin will proceed with the stepper
ISR. Now, at the end of the stepper ISR, the temperatre ISR gets enabled
again. While Marlin proceed the rest of the temperature ISR, it's now
vulnerable to a second ISR call.
2017-02-14 07:52:03 -06:00
Sebastianv650
1b59766fcb
Cleanup position_float
...
Hopefully fixes Marlin #5481
2017-02-12 13:09:06 +01:00
Scott Lahteine
a950c31e2d
Merge pull request #5815 from thinkyhead/rc_pulses_per_step
...
Give encoder pulse/steps conditionals their own block
2017-02-12 04:14:00 -06:00
Scott Lahteine
7176de8605
Merge pull request #5814 from thinkyhead/hotend_loop_always
...
Make HOTEND_LOOP more consistent, let compiler optimize it
2017-02-12 04:13:14 -06:00
Scott Lahteine
adec219ca5
Merge pull request #5811 from thinkyhead/fix_two_strings
...
No space after X: or A: in M114 output
2017-02-12 04:11:51 -06:00
jes
eaa829b58c
Reduce memory use by ABL_BILINEAR_SUBDIVISION slightly
2017-02-12 04:09:48 -06:00
Scott Lahteine
1c99ca82d8
Give encoder pulse/steps conditionals their own block
2017-02-12 03:57:57 -06:00
Scott Lahteine
e44294bb4d
Make HOTEND_LOOP more consistent, let compiler optimize it
2017-02-12 02:50:38 -06:00
Scott Lahteine
701f4a6d9d
Merge pull request #5729 from Bob-the-Kuhn/guaranteed-BLTouch-detection
...
guaranteed BLTouch detection
2017-02-12 01:13:35 -06:00
Scott Lahteine
c15b9a6a06
No space after X: or A: in M114 output
2017-02-12 00:10:03 -06:00
Scott Lahteine
e1702816f6
Fix SD_CHECK_AND_RETRY condition
...
Addressing #5806
2017-02-11 23:55:56 -06:00
Scott Lahteine
1bc5be3bdf
Cast DELTA_PRINTABLE_RADIUS to float in sq()
...
Addressing #5625
2017-02-11 23:28:39 -06:00
Bob-the-Kuhn
0369f97ec1
guaranteed BLTouch detection
...
To guarantee that the 5mS pulse from a BLTouch is recognized you need to
have the endstops.update() routine run twice in that 5mS period.
At 200 steps per mm, my system has problems below a feedrate of 120 mm
per minute.
Two things were done to guarantee the two updates within 5mS:
1) In interrupt mode, a check was added to the temperature ISR. If the
endstop interrupt flag/counter is active then it'll kick off the endstop
update routine every 1mS until the flag/counter is zero. This
flag/counter is decremented by the temperature ISR AND by the stepper
ISR.
2) In poling mode, code was added to the stepper ISR that will make sure
the ISR runs about every 1.5mS. The "extra" ISR runs only check the
endstops. This was done by grabbing the intended ISR delay and, if it's
over 2.0mS, splitting the intended delay into multiple smaller delays.
The first delay can be up to 2.0mS, the next ones 1.5mS (as needed) and
the last no less than 0.5mS.
=========================================
BLTouch error state recovery
If BLTouch already active when deploying the probe then try to reset it
& clear the probe.
If that doesn't fix it then declare an error.
Also added BLTouch init routine to startup section
2017-02-11 12:01:34 -06:00
Scott Lahteine
1e4d4e5915
Fix typo in language_uk
...
Thanks to @pavlus for this one
2017-02-10 15:34:31 -06:00
Scott Lahteine
7fe7a0c8be
Merge pull request #5793 from thinkyhead/rc_adjust_probe_output
...
Adjust probe_pt() terminal output to respect probe z-offset
2017-02-09 23:05:02 -06:00
Scott Lahteine
633c253bc1
Merge pull request #5792 from thinkyhead/rc_default_dac_vals
...
Default DAC values for RigidBoard V2
2017-02-09 22:56:03 -06:00
Florian Heilmann
7bbc31704c
Adjust probe_pt() terminal output to respect probe z-offset
2017-02-09 22:54:22 -06:00
Scott Lahteine
a245656db3
Merge pull request #5713 from gege2b/RCBF-French
...
French translation : Added missing strings as well as missing accents
2017-02-09 22:43:56 -06:00
jaysonkelly
713931338a
Default DAC values for RigidBoard V2
2017-02-09 22:39:00 -06:00
Bob-the-Kuhn
ae706233a8
pinsDebug for 644/1284 & USB646/1286 families
...
added conditional compilation for PWMs 1C & 3C
add Teensyduino compatibility
==========================================
changes per review - minor formatting changes
1) remove non-printable character at the end of line 687
2) split a really long comment into two lines
3) got rid of some trailing spaces
============================================
Made pinsDebug_Teensyduino.h the same between this PR and PR 5668 which
is for a re-written pinsDebug.h file.
The changes were:
1) added copyright @ GNU license header
2) a blank line crept in.
2017-02-09 07:24:02 -06:00
Gege2B
22dfcc9a71
French translation : Added missing strings as well as missing accents
2017-01-17 23:29:23 +01:00
Scott Lahteine
9b5515926a
Merge pull request #5696 from thinkyhead/rc_volumetric_default
...
Allow enabling volumetric filament on config load
2017-01-14 05:48:51 -08:00
Robert Kirk
0d147ead66
Allow enabling volumetric filament on config load
2017-01-14 04:37:49 -08:00
AnHardt
fa26767efe
Replace all remaining 'boolean' with 'bool'
2017-01-13 13:03:52 +01:00
AnHardt
f6858d9974
Fix M110 without leading N
...
Store N in the right variable.
This is too rarely used.
"mea culpa, mea culpa, mea maxima culpa"
2017-01-13 12:33:50 +01:00
Scott Lahteine
0c0c840ba8
Merge pull request #5683 from emartinez167/EMartinez-Changes
...
Updates to some incorrectly ended strings in the Spanish translation
2017-01-12 07:49:15 -08:00
Kai
25dae3bccc
Update language_de.h
...
Small corrections
2017-01-12 16:06:58 +01:00
emartinez167
7292145f4e
Fix for some wrong strings
...
On last commit, some strings were ended with the incorrect character.
This fixes it.
2017-01-12 22:35:04 +08:00
Scott Lahteine
93a9aa6b76
Merge pull request #5682 from thinkyhead/rc_spanish_jan
...
Updates to Spanish language
2017-01-12 06:14:10 -08:00
Scott Lahteine
7a9c1a279b
Merge pull request #5681 from thinkyhead/rc_prevent_boot_loop
...
Reset watchdog in SD init to prevent reboot
2017-01-12 06:13:56 -08:00
Scott Lahteine
e409c7f9e8
Merge pull request #5645 from esenapaj/From-microseconds-to-milliseconds
...
From "microseconds" to "milliseconds"
2017-01-12 06:02:55 -08:00
emartinez167
020c6af7b0
Updates to Spanish language
...
Add missing Spanish language definitions.
2017-01-12 05:53:39 -08:00
Hans Raaf
d29cc8f7bc
Reset watchdog in SD init to prevent reboot
...
If the watchdog is enabled and bootscreen + SD card checks take too long, Marlin may hang at boot time because of the reset loop. We have this happen all the time with the Anet board if no SD card is inserted.
2017-01-12 05:33:38 -08:00
Scott Lahteine
7743849608
Merge pull request #5680 from thinkyhead/rc_configs_puhlease
...
code_value_float tweak
2017-01-12 05:22:47 -08:00
Scott Lahteine
16357fbfdf
Merge pull request #5619 from Ocarthon/RCBugFix
...
Disable SD Detect for K8400
2017-01-12 05:22:03 -08:00
Scott Lahteine
e57c0fce66
Move MOSFET changes above #include for RIGIDBOARD
...
Correction to #5629
2017-01-12 04:46:49 -08:00
Scott Lahteine
c376f6a2cb
code_value_float tweak
2017-01-12 04:38:09 -08:00
Scott Lahteine
fb3c30e24c
Fix lcd_wait_for_homing causing menu to block
...
As a showcase function for how to do waiting in the lcd menu, this function should be preserved.
2017-01-12 04:37:23 -08:00
Scott Lahteine
f8ae0fd29f
Merge pull request #5647 from manianac/RCBugFix-PrepareMenuFix
...
Fix empty Prepare menu
2017-01-12 04:20:18 -08:00
Robert Kirk
aab5118c6a
Remove error causing break command
...
Use index macro instead of e
2017-01-01 17:47:01 -05:00
esenapaj
d38e335272
From "microseconds" to "milliseconds"
...
delay() is milliseconds
2017-01-02 01:19:33 +09:00
Philip Standt
8ae2bc7e2e
Disable SD Detect for K8400
2016-12-28 23:21:18 +01:00
Scott Lahteine
4061fca1ad
Sanity checks for FILAMENT_CHANGE_FEATURE and FILAMENT_RUNOUT_SCRIPT
2016-12-23 19:55:12 -08:00
Scott Lahteine
5ab7b91615
Comment on filament runout sensor config
2016-12-23 19:50:27 -08:00
Scott Lahteine
922c67f17d
Merge pull request #5588 from thinkyhead/rc_remove_biv25
...
Drop biv2.5 delta configurations
2016-12-23 19:14:50 -08:00
Scott Lahteine
8c6c048551
drop biv2.5 delta configurations
2016-12-23 18:56:07 -08:00
Scott Lahteine
92dbeebf40
Define ADV_NEVER, ADV_RATE
2016-12-23 18:43:23 -08:00
Robert Kirk
306c184b1a
Allow M600 when dryrun debugging
2016-12-21 20:30:51 -05:00
Scott Lahteine
fe2ea2906f
Merge pull request #5573 from thinkyhead/rc_unify_stepper_isr
...
LIN_ADVANCE with unified stepper ISR
2016-12-21 02:53:32 -08:00
Sebastianv650
84c685f8b5
First draft of Unified Stepper / E Advance ISR
2016-12-21 01:34:39 -08:00
Scott Lahteine
83021d82c6
Merge pull request #5502 from AnHardt/symbol-strings
...
Add symbol-strings
2016-12-21 00:51:59 -08:00
Scott Lahteine
036eccfd6e
Merge pull request #5572 from Kaibob2/patch-5
...
Update language_de.h
2016-12-21 00:50:40 -08:00
Scott Lahteine
b794b76836
Merge pull request #5567 from AnHardt/fix5194
...
Fix 5194
2016-12-21 00:49:52 -08:00
Scott Lahteine
451ba5df01
Merge pull request #5516 from esenapaj/Suppress-warning
...
Suppress warning
2016-12-21 00:00:35 -08:00
Scott Lahteine
92dbc63949
Merge pull request #5571 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
2016-12-20 23:59:55 -08:00
Kai
ade72535c4
Update language_de.h
...
Added tarnslation for
```
#define MSG_DEBUG_MENU
#define MSG_PROGRESS_BAR_TEST
```
2016-12-21 08:57:39 +01:00
esenapaj
ab6b005867
Suppress warning
2016-12-21 09:13:03 +09:00
AnHardt
61f15ef7e7
Fix 5194
...
I have been a bit too radical in cleaning up this section.
2016-12-21 00:45:29 +01:00
esenapaj
60515ff700
Update Japanese translation
...
・Add new translation
2016-12-21 08:44:07 +09:00
Scott Lahteine
1e419655f3
Followup to #5550 - spacing before "mm"
2016-12-20 02:27:54 -08:00
Scott Lahteine
1a26ce1cdc
Merge pull request #5550 from FHeilmann/patch-2
...
Allow negative retract values in the LCD
2016-12-20 02:10:22 -08:00
Scott Lahteine
bec30c89e7
Merge pull request #5522 from esenapaj/Add-description-for-dual-x
...
Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE
2016-12-20 01:31:53 -08:00
Scott Lahteine
7739c0affa
Change "+mm" to "mm" in most languages
...
- Japanese and Chinese still need update
2016-12-20 01:16:51 -08:00
Scott Lahteine
1cba425308
Allow negative recover-swap length from LCD
2016-12-20 01:16:08 -08:00
Scott Lahteine
298a8c6a3c
Merge pull request #5561 from thinkyhead/rc_no_case_light
...
Support for M335 case light "no case light"
2016-12-20 01:06:59 -08:00
Scott Lahteine
644f45cbd8
Merge pull request #5563 from akaJes/m600
...
FILAMENT_CHANGE_FEATURE allowed in idle mode
2016-12-20 01:06:10 -08:00
Scott Lahteine
0d2fc13516
Place "Level Bed" closer to "Auto Home"
2016-12-20 00:51:03 -08:00
Scott Lahteine
b031d28ebf
Encoder events should not skip stripes
2016-12-20 00:21:51 -08:00
Scott Lahteine
22881f38b9
Fix updating of "bool" menu items
2016-12-20 00:21:51 -08:00
Scott Lahteine
eb68715b94
No "Cooldown" menu if heaters are off
2016-12-20 00:21:51 -08:00
Jesus
4ed976b5ff
m600 fixes
2016-12-20 09:47:46 +02:00
Damien
4e2639942b
Support for M335 case light "no case light"
2016-12-19 23:23:08 -08:00
Scott Lahteine
18ba31e9b5
Add Debug Menu with LCD_PROGRESS_BAR_TEST as an example
2016-12-19 22:57:14 -08:00
Scott Lahteine
03af5961b0
Hide (or remove) custom character change on boot screen
2016-12-19 22:27:28 -08:00
Scott Lahteine
1642f5ed31
Add macro to some en strings
2016-12-19 22:27:28 -08:00
Scott Lahteine
dbb2d56c89
Correct comment on watchdog timer
2016-12-19 22:27:28 -08:00
Scott Lahteine
41a30923f3
Merge pull request #5559 from thinkyhead/rc_minimum_gcc_version
...
Throw an error for gcc before 4.7
2016-12-19 19:50:44 -08:00
Scott Lahteine
6d6a1db6ec
Apply const to _EEPROM_writeData value param
2016-12-19 18:50:43 -08:00
Robert Kirk
f724ef5820
Have bed leveling status output current status, not requested.
2016-12-19 18:47:45 -08:00
Scott Lahteine
20218e553d
Merge pull request #5527 from MagoKimbra/rc_configuration_store_fix_size
...
Fix size
2016-12-19 18:47:28 -08:00
Scott Lahteine
dcfbe2bd3c
Throw an error for gcc before 4.7
2016-12-19 18:30:51 -08:00
Scott Lahteine
82fde7df2e
Merge pull request #5512 from AnHardt/speed-compare-bbr
...
Optimize handling of block_buffer_runtime()
2016-12-19 18:21:06 -08:00
Scott Lahteine
8986225752
Spacing, cleanup in speed_lookuptable.h
2016-12-19 14:52:45 -08:00
Scott Lahteine
e12c8e5cac
Split up thermistor tables
2016-12-19 14:47:54 -08:00
Florian Heilmann
a7334fd2a0
Allow negative retract values in the LCD
...
This can already be done via G-Code, so adding the capability to the LCD should be straight forward.
2016-12-19 14:19:06 +01:00
AnHardt
292eb365c6
Optimize handling of block_buffer_runtime()
...
millis_t is long - divisions take for ever.
Return a kind of millisecond instead of microsecond -
divided by 1024 instead of 1000 for speed. (2.4% error)
That does not matter because block_buffer_runtime is
already a too short estimation.
Shrink the return-type.
2016-12-19 11:47:28 +01:00
esenapaj
6854f44bf2
Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE
2016-12-19 02:21:10 +09:00
Scott Lahteine
3f6f036f7c
Merge pull request #5524 from thinkyhead/rc_optional_dogm_splitup
...
Report EEPROM data size, not final index
2016-12-16 18:55:48 -08:00
MagoKimbra
86ba7e4542
Fix size
...
Fix size for writeData and readData.
For bilinear grid 11 x 11 for example, size is 4 (float) x 11 x 11 = 484. uint8_t max is 255.
2016-12-16 14:49:33 +01:00
Scott Lahteine
f9f75c8016
Fix USE_RAW_KINEMATICS in prepare_kinematic_move_to
2016-12-15 23:15:38 -08:00
Scott Lahteine
87921f390a
Clarify what are "logical" positions in the planner
2016-12-15 23:15:38 -08:00
Scott Lahteine
a4f10f59c3
Write the E parameter length correctly
2016-12-15 23:15:38 -08:00
Scott Lahteine
2e904cb4f9
Merge pull request #5514 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
2016-12-15 21:38:40 -08:00
Scott Lahteine
0b6817e0f9
Merge pull request #5505 from android444/patch-4
...
Update for translations language_pl.h
2016-12-15 21:38:18 -08:00
Scott Lahteine
3bd76f60e4
Report EEPROM data size, not final index
2016-12-15 20:26:28 -08:00
Scott Lahteine
78d6d6e076
Merge pull request #5452 from thinkyhead/rc_save_your_mesh
...
Save Bed Leveling to EEPROM
2016-12-15 20:23:01 -08:00
Scott Lahteine
0d0aa6c20d
Patch type for max_acceleration_mm_per_s2 save/restore
2016-12-15 20:05:42 -08:00
Scott Lahteine
d4f5418802
Merge pull request #5517 from esenapaj/Fix-for-PR-#5255
...
Fix for the PR #5255 (Case light menu (3rd attempt))
2016-12-15 20:01:22 -08:00
Scott Lahteine
fa7010b0a1
Merge pull request #5515 from esenapaj/Remove-unnecessary-tabs-and-spaces
...
Remove unnecessary tabs and spaces
2016-12-15 19:58:32 -08:00
Scott Lahteine
6d7b1cdf6c
Add M421 for ABL Bilinear
2016-12-15 19:39:11 -08:00
Scott Lahteine
32e65dc429
Extend M420
to print state and, with V
, the matrix / mesh
2016-12-15 19:39:11 -08:00
Scott Lahteine
d04258753b
Don't throw away the bed level matrix on G28
2016-12-15 19:21:18 -08:00
Scott Lahteine
8f0f225d10
Save ABL Planar Matrix to EEPROM
2016-12-15 19:21:15 -08:00
Scott Lahteine
e2429a9da1
Generalize Bed Leveling flag in EEPROM
2016-12-15 19:20:52 -08:00
Scott Lahteine
e42fd7813a
Save ABL Bilinear Grid to EEPROM
2016-12-15 19:20:48 -08:00
Scott Lahteine
492b68f8e3
Better EEPROM read/write error handling
2016-12-15 19:08:44 -08:00
Scott Lahteine
55722c09da
Use "UNPROBED" for un-probed bed_level_grid points
2016-12-15 19:08:44 -08:00
Scott Lahteine
2643404ac8
Throw an error in M420 if can't enable
2016-12-15 19:08:43 -08:00
Scott Lahteine
b1539394fd
Use planner.unapply_leveling to undo tilt in G29
2016-12-15 19:08:43 -08:00
Scott Lahteine
04636f78eb
Re-enable MBL/ABL after M48
2016-12-15 19:08:43 -08:00
Scott Lahteine
9b41638672
Minor tweak to G29 grid points
2016-12-15 19:08:42 -08:00
Scott Lahteine
daa2cad21f
Fix comment on G29 to include 'Z'
2016-12-15 19:08:42 -08:00
Scott Lahteine
8244fefcc2
Tweak call to reset_bed_level
in G29
2016-12-15 19:08:42 -08:00
Scott Lahteine
0995a5d734
Fixup reset_bed_level
2016-12-15 19:08:42 -08:00
Scott Lahteine
1b2fb2bdc7
ABL_GRID_POINTS_* => ABL_GRID_MAX_POINTS_*
2016-12-15 19:08:41 -08:00
esenapaj
d486361c69
Fix for commented section of Config_RetrieveSettings()
2016-12-16 04:34:47 +09:00
esenapaj
88157ba529
Fix for the PR #5255 (Case light menu (3rd attempt))
2016-12-16 00:57:32 +09:00
esenapaj
069c6b38dd
Remove unnecessary tabs and spaces
2016-12-16 00:21:32 +09:00
esenapaj
9c8116aedf
Update Japanese translation
...
・Add new translation
2016-12-16 00:06:58 +09:00
AnHardt
57b1275cde
Add symbol-string to _de
...
Add symbol-string for _de
to reduce the frquencey of regenerating 'mappers' and 'fonts'
with the new utf-system.
2016-12-15 14:37:18 +01:00
android444
3363d2c937
Update for translations language_pl.h
2016-12-14 17:32:33 +01:00
Scott Lahteine
06af3b62ba
Move HOLLOW_FRAME options to config_adv
2016-12-14 04:31:27 -08:00
Scott Lahteine
67ca6c7bfe
Codestyle tweaks to ultralcd.cpp
2016-12-14 04:20:33 -08:00
Scott Lahteine
8d9fcd8e6f
Merge pull request #5495 from AnHardt/autoadjusting_display-updates
...
Adaptive screen updates for all kinds of displays
2016-12-14 04:16:26 -08:00
Scott Lahteine
77a360912d
Merge pull request #5491 from yhfudev/devel-rcbugfix-language-headers
...
UTF-8 language header files
2016-12-14 02:23:09 -08:00
AnHardt
d0e24e0876
Adaptive screen updates for all kinds of displays
...
The target here is to update the screens of graphical and char base
displays as fast as possible, without draining the planner buffer too much.
For that measure the time it takes to draw and transfer one
(partial) screen to the display. Build a max. value from that.
Because ther can be large differences, depending on how much the display
updates are interrupted, the max value is decreased by one ms/s. This way
it can shrink again.
On the other side we keep track on how much time it takes to empty the
planner buffer.
Now we draw the next (partial) display update only then, when we do not
drain the planner buffer to much. We draw only when the time in the
buffer is two times larger than a update takes, or the buffer is empty anyway.
When we have begun to draw a screen we do not wait until the next 100ms
time slot comes. We draw the next partial screen as fast as possible, but
give the system a chance to refill the buffers a bit.
When we see, during drawing a screen, the screen contend has changed,
we stop the current draw and begin to draw the new content from the top.
2016-12-13 18:44:34 +01:00
yhfudev
2dbd38ce16
tag the utf-8 strings
2016-12-13 11:54:35 -05:00
Scott Lahteine
94ffb58da7
Prevent retract un-hop at wrong height
2016-12-13 08:24:12 -08:00
Scott Lahteine
0772c8e55f
Merge pull request #5487 from thinkyhead/rc_easier_move_axis
...
Rearrange Move Menu, Fix up Delta Calibration
2016-12-13 07:07:05 -08:00
Scott Lahteine
b2c8de856b
Merge pull request #5478 from AnHardt/stepspermm
...
Replace ftostr62sign with ftostr62rj
2016-12-13 07:05:42 -08:00
Scott Lahteine
1fd8185d37
Merge pull request #5492 from thinkyhead/rc_fix_language_es
...
Fix multiple definitions of message macros in the language-es.h
2016-12-13 06:57:52 -08:00
yhfudev
1cdffdede7
fix multiple definitions of message macros in the language-es.h
2016-12-13 06:48:38 -08:00
Scott Lahteine
b67f8cb499
Merge pull request #5490 from jbrazio/update-bqhp2
...
Update the bq Hephestos 2 example configuration
2016-12-13 05:04:24 -08:00
Scott Lahteine
93b2833347
Move Menu: Select axis first, resolution after
2016-12-13 03:11:14 -08:00
Scott Lahteine
48aa0f6475
Merge pull request #5475 from AnHardt/utf-mapper-tr
...
utf8-mapper for Turkish
2016-12-13 03:03:22 -08:00
Scott Lahteine
b9ee0d7bd3
Merge pull request #5488 from thinkyhead/rc_fade_compiler_warn
...
Patch fade_factor compiler warning
2016-12-13 03:00:47 -08:00
Scott Lahteine
641e0936d4
Patch up Delta Calibration Menu
2016-12-13 02:42:28 -08:00
Scott Lahteine
b4dbf4d18a
Non-reentrant "Moving..." screen to safely wait in LCD
2016-12-13 02:42:27 -08:00
Scott Lahteine
7b625e0048
Patch fade_factor compiler warning
2016-12-13 02:29:01 -08:00
Scott Lahteine
6fa8fd15e2
Add negative temperatures for Thermistor 1
...
Changes from #5485 by @AndKe
2016-12-13 02:06:16 -08:00
Scott Lahteine
2b5d424394
Use handle_reprapworld_keypad for keypad handling
2016-12-13 01:41:08 -08:00
Scott Lahteine
887ed73c9b
Expose delta_clip_start_height for use by others
2016-12-13 01:41:08 -08:00
João Brázio
3f75edb1d6
Updated bq Hephestos 2 example configuration
2016-12-13 09:26:07 +00:00
Daniel Martinez
b796e7031d
Update Aragonese translation
2016-12-12 17:36:33 -08:00
AnHardt
cd2b74e88d
Replace ftostr62sign with ftostr62rj
...
`ftostr62sign()` is used only when displaing/editing
Steps/mm. A sign is not needed - the value is always positive.
Because the number part is long there is no't much place for the values name.
With this PR the is one more char for the name possible.
2016-12-12 20:25:20 +01:00
AnHardt
795541f87e
utf8-mapper for Turkish
...
The non utf8 version of turkish is a bit unhandy.
Delete `language_tr.h`
Rename `language_tr_utf.h` to `language_tr.h`
Provide a propper utf8-mapper for Turkish and use it.
2016-12-12 15:56:59 +01:00
Scott Lahteine
7c71bb2900
Merge pull request #5471 from thinkyhead/rc_planner_report_m503
...
Patch to show E factors in M503
2016-12-11 17:47:41 -08:00
Scott Lahteine
39401b7472
Patch to show E factors in M503
2016-12-11 17:37:29 -08:00
Scott Lahteine
6b50230022
Merge pull request #5447 from thinkyhead/rc_update_dutch
...
Dutch cleanup, ordering, placeholders
2016-12-10 22:13:20 -08:00
Scott Lahteine
2c97c11731
Merge pull request #5454 from thinkyhead/rc_fix_delta_g29
...
Fix G29 starting height on DELTA
2016-12-10 22:10:33 -08:00
Scott Lahteine
8239c45b30
Merge pull request #5448 from thinkyhead/rc_eeprom_bump
...
EEPROM: Prolong life. Better support for `DISTINCT_E_FACTORS`.
2016-12-10 22:06:00 -08:00
Scott Lahteine
21ed43df5f
New Dutch terms
2016-12-10 21:59:45 -08:00
Scott Lahteine
4bc6536f54
Move to safe zone on DELTA if using do_blocking_move_to*
2016-12-10 21:28:24 -08:00
Scott Lahteine
6f389158d7
Compile less code with EEPROM off
2016-12-09 06:05:32 -08:00
Scott Lahteine
f2301a2a04
Add e-stepper count to EEPROM (for planner vars)
2016-12-09 06:05:31 -08:00
Scott Lahteine
53c9fca0f6
Only write to EEPROM when a byte changes
2016-12-09 06:05:31 -08:00
AnHardt
13eebd11cf
volatile_block_buffer_runtime_us
...
`block_buffer_runtime_us` is mangled in the planner and in the stepper-ISR.
So it needs to be volatile and interrupt protected.
2016-12-09 14:49:02 +01:00
Scott Lahteine
8383f35b40
Merge pull request #5445 from thinkyhead/rc_reduce_jerk_code
...
Slightly shrink jerk and advance code
2016-12-09 02:54:03 -08:00
Gege2B
40453c1b9a
Update french translation (LIGHTS str)
2016-12-09 11:18:29 +01:00
Scott Lahteine
fc2fc828b3
Prettify LIN_ADVANCE code with the positive condition
2016-12-09 00:29:07 -08:00
Scott Lahteine
1929502e15
Add const to some variables
2016-12-09 00:29:06 -08:00
Scott Lahteine
2da4d22520
Pretty up ADVANCE code
2016-12-08 22:51:28 -08:00
Scott Lahteine
af024e1d7c
Pretty up coast / reverse jerk code
2016-12-08 22:50:25 -08:00
Scott Lahteine
3f3b5c86d8
Slightly shrink code for jerk-based reduction of safe_speed
2016-12-08 22:24:29 -08:00
AnHardt
87fe20b5f5
Simplify long_move()
...
We are not really interested in, if there are blocks.
All information we need is in `block_buffer_runtime_us`.
2016-12-09 00:13:35 +01:00
Scott Lahteine
574d9c7d3d
Merge pull request #5432 from Kaibob2/patch-2
...
Update language_de.h
2016-12-08 13:14:04 -08:00
Scott Lahteine
f089279263
Merge pull request #5431 from esenapaj/Suppress-warnings,-etc
...
Suppress warnings, etc
2016-12-08 13:10:12 -08:00
Scott Lahteine
d92ccb230c
Merge pull request #5438 from AnHardt/patch-long_move
...
Patch long_move()
2016-12-08 13:08:36 -08:00
AnHardt
706b240251
Patch long_move()
...
While the last move in the planner_buffer is running
it's duration is already subtracted from block_buffer_runtime_us.
2016-12-08 21:03:26 +01:00
esenapaj
a298a58684
Remove redundant "E"
2016-12-09 02:27:34 +09:00
Kai
390a6d976a
Update language_de.h
...
#define MSG_ENDSTOP_ABORT doesn't fit in Display
See https://github.com/MarlinFirmware/Marlin/issues/5401#issuecomment-265714487
2016-12-08 12:18:19 +01:00
esenapaj
e9393c3634
Suppress warnings, etc
...
・Suppress warnings
・Remove unused variable "did_update"
2016-12-08 17:47:59 +09:00
Scott Lahteine
da6a094424
Sanity-check inverting and pullups for Z probe and Z endstop
...
`Z_MIN_ENDSTOP_INVERTING` must match `Z_MIN_PROBE_ENDSTOP_INVERTING`
when using `Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN`.
This is easy to overlook.
2016-12-08 00:12:19 -08:00
Scott Lahteine
3fb43c11fc
Fix compile error with LCD_I2C_VIKI
2016-12-07 23:29:45 -06:00
Scott Lahteine
aa241c63b3
Include M205 note in configurations
2016-12-07 14:45:44 -06:00
Scott Lahteine
c8a95ec514
Merge pull request #5413 from MagoKimbra/rc_fix_mesh
...
Fix Mesh without Fade Height
2016-12-07 03:16:02 -06:00
Scott Lahteine
35ad9626f1
Merge pull request #5410 from thinkyhead/rc_polish_update
...
Update Polish language, reduce filament change messages
2016-12-07 03:15:53 -06:00
Scott Lahteine
01e5d46ea7
Patch some planner compile errors
2016-12-07 02:26:24 -06:00
MagoKimbra
5383212a28
Fix Mesh without Fade Height
2016-12-07 09:23:42 +01:00
Scott Lahteine
dbe1dc1452
Merge pull request #5406 from Rigid3D/RCBugFix
...
Turkish Translation Update
2016-12-07 00:56:08 -06:00
Scott Lahteine
4783a59249
Remove filament-change empty lines from languages
2016-12-07 00:53:03 -06:00
Scott Lahteine
1705099c3e
Save space by not defining unused filament change message lines
2016-12-07 00:53:03 -06:00
android444
9b1f4b514b
Update Polish language
...
Translation of messages in English to Polish.
2016-12-06 22:28:33 -06:00
Robert Marko
84f7e1de04
Updates to Croatian language
2016-12-06 22:24:12 -06:00
esenapaj
08cdaaf19b
README and Version for 1.1.0-RCBugFix
...
Sync with RC8
2016-12-07 10:43:58 +09:00
Mehmet Sutas
f4663cb677
Update language_tr_utf8.h
2016-12-07 00:21:56 +03:00
Mehmet Sutas
b4fd115d4e
Update language_tr.h
2016-12-07 00:20:07 +03:00