Scott Lahteine
2580104c8b
Revert recent probe changes
...
- Revert "Fix FIX_MOUNTED_PROBE compile error (#14393 )"
- Revert "Fix G28 with non-BLTouch probes (#14381 )"
- Revert "Fix BLTOUCH deploy/stow in HS mode (#14352 )"
- Revert "Apply needed BLTouch patch (#14233 )"
Co-Authored-By: AnHardt <github@kitelab.de>
2019-06-26 05:33:43 -05:00
thisiskeithb
cd302f9464
Add MKS SGen-L Board ( #14411 )
2019-06-26 04:17:06 -05:00
Andy Shaw
064177154c
Update SD card connection / sharing options ( #14325 )
2019-06-26 03:55:57 -05:00
BigIronGuru
9f136a7c67
Low-priority homing in G34 ( #14391 )
2019-06-26 03:52:01 -05:00
Scott Lahteine
49627069a5
Shorthand for home-after-deactivate
2019-06-26 03:47:55 -05:00
J.C. Nelson
30a3db4f22
Fix Malyan M200 config and protocol ( #14394 )
2019-06-26 03:35:52 -05:00
oechslein
8c55bd5451
Update "StallGuard threshold" heading ( #14395 )
2019-06-26 03:33:07 -05:00
Scott Lahteine
98f3a3d5c3
Bump distribution date
2019-06-26 03:15:31 -05:00
Msq001
e3846ec7a1
SKR mini can use 128x64 LCD ( #14388 )
2019-06-26 01:12:41 -05:00
Eric Ptak
8934b32f1b
Fysetc AIO II / Cheetah STM32F1 ( #14407 )
2019-06-26 00:40:29 -05:00
Marcio Teixeira
8e23e9b16c
Fix FIX_MOUNTED_PROBE compile error ( #14393 )
2019-06-25 04:55:29 -05:00
Tanguy Pruvot
07dac315a9
Up-to-date STM32F1 README ( #14386 )
2019-06-24 03:44:26 -05:00
thisiskeithb
a4aa3621c0
MKS Robin Mini Board Support ( #14366 )
2019-06-24 03:42:22 -05:00
Scott Lahteine
cf762d2c73
Fix enqueueing bug
2019-06-23 23:02:07 -05:00
BigIronGuru
12d21e642f
Update G34 for non-BLTouch probes ( #14380 )
2019-06-23 20:55:43 -05:00
BigIronGuru
5986194c36
Fix G28 with non-BLTouch probes ( #14381 )
2019-06-23 20:53:05 -05:00
InsanityAutomation
aa0383a83b
Enhance IDEX toolchange auto-return w/ no park, full control ( #14117 )
2019-06-23 20:00:48 -05:00
Scott Lahteine
3d9d72e8db
Include order, spacing, etc.
2019-06-23 04:02:52 -05:00
mikeshub
1b1a4677f5
Fix LCD.h compilation error ( #14377 )
2019-06-22 21:08:30 -05:00
sjasonsmith
07b41a8c3f
Include SOLENOID_PROBE in leveling report ( #14344 )
2019-06-22 17:54:37 -05:00
thisiskeithb
71b2700c3c
Anycubic Trigorilla 1.4 Rev. 1.1 ( #14357 )
2019-06-22 17:53:45 -05:00
BigIronGuru
f5afaaef5b
Fix probe.cpp warning ( #14367 )
2019-06-22 17:27:33 -05:00
BigIronGuru
def4bb987d
Reset, stow BLTouch before mode change ( #14368 )
2019-06-22 17:26:02 -05:00
Scott Lahteine
78557076ff
Add planner.synchronize to UBL G29
2019-06-22 17:23:29 -05:00
BigIronGuru
6578aa4e1b
Apply minimum timing to BLTouch commands ( #14369 )
2019-06-22 17:20:19 -05:00
teemuatlut
2247bf1ba5
Add missing dedge init for TMC2209 ( #14370 )
2019-06-22 17:00:15 -05:00
mikeshub
1db7013e3b
Fix and improve PID loops ( #14373 )
...
- Windup guarding was missing. The kludge in place of windup guard is removed. D term filter calculations are simplified to require fewer `float` calculations. Sign change for D term output to make debugging output clearer.
- Use "no overshoot" for bed PID tuning.
2019-06-22 16:52:56 -05:00
Scott Lahteine
17778d1c2a
Fix M916-918 subcommands
2019-06-22 16:18:42 -05:00
Tanguy Pruvot
be69ec5b32
Fix PLR/M43 warnings ( #14333 )
2019-06-22 00:48:47 -05:00
BigIronGuru
9c83135d40
Only home Z at the end of G34 ( #14353 )
2019-06-22 00:43:33 -05:00
InsanityAutomation
5df051fdee
Fix Start SD Print bug ( #14354 )
...
Followup to the G-code parser injection update.
2019-06-22 00:37:21 -05:00
LinFor
0f6f5132c1
Fix variable conflict in ok_to_send ( #14351 )
2019-06-21 19:04:30 -05:00
MrMabulous
c41b005f33
Add Extra Probing option, discarding outliers ( #14338 )
2019-06-21 19:02:26 -05:00
BigIronGuru
8f99d45045
Fix BLTOUCH deploy/stow in HS mode ( #14352 )
2019-06-21 18:55:27 -05:00
Tobias Frost
eeaef2410a
Support DGUS Display with DWIN OS ( #13253 )
2019-06-21 04:47:23 -05:00
Scott Lahteine
bb0bcbaec0
Suppress compiler warning
2019-06-21 02:20:40 -05:00
Tanguy Pruvot
52383633e7
STM32F1: M43 PINS_DEBUGGING ( #14072 )
2019-06-21 01:20:17 -05:00
Karl Andersson
81d550754a
Fix "UNUSED" redefined warning on HAL_STM32 ( #14342 )
2019-06-21 00:48:10 -05:00
Karl Andersson
4b365552db
Fix Marduino SBI/CBI redefine ( #14341 )
2019-06-21 00:46:23 -05:00
InsanityAutomation
a9acd2f497
G34 configurable angle limit ( #14321 )
2019-06-20 21:18:36 -05:00
Scott Lahteine
a31cb910f5
Tweak some config spacing
2019-06-20 21:08:47 -05:00
Marcio Teixeira
49ea1c635a
Fix missing dependencies ( #14339 )
2019-06-20 16:37:20 -05:00
Scott Lahteine
4df4c47994
Add TMC2209 support ( #14249 )
2019-06-20 15:47:50 -05:00
Tanguy Pruvot
ed0c70f0a0
SKRmini followup - Fysetc config updates ( #14327 )
2019-06-20 05:49:27 -05:00
Scott Lahteine
dd06017f64
Bring configs up to date
2019-06-19 01:03:51 -05:00
Scott Lahteine
9131b11944
Games in Info menu, if enabled
2019-06-19 00:03:32 -05:00
Scott Lahteine
4c872a01f2
G-code queue singleton, front injection ( #14236 )
2019-06-19 00:00:19 -05:00
Tanguy Pruvot
75aeb41ab7
SKRmini support for Fysetc Mini Panel ( #14319 )
2019-06-18 19:34:16 -05:00
InsanityAutomation
bf64dd4db6
Improve G34, M422 (Z alignment) ( #14142 )
2019-06-18 07:02:18 -05:00
Tanguy Pruvot
391250b04f
STM32F1: Don't toggle EEPROM SPI SS ( #14299 )
2019-06-18 06:48:20 -05:00
Giuliano Zaro
27d30c1be8
Update Italian language ( #14302 )
2019-06-18 06:45:34 -05:00
Scott Lahteine
3f6424076b
Update M524 description
2019-06-18 05:04:55 -05:00
Scott Lahteine
cf3631226b
Document G-code M290
2019-06-18 04:53:31 -05:00
Scott Lahteine
c12b6ba760
Add Dagoma F5 to Makefile
2019-06-18 04:40:00 -05:00
3DSmitty
5b13abcacb
Fix SPI_SD Outside of HAL_STM32F1 ( #14306 )
2019-06-18 02:38:18 -05:00
Bob Kuhn
089d12df16
Fix duplicate board IDs ( #14310 )
2019-06-18 02:26:13 -05:00
Ludy
2290b269dc
Unused variable ( #14301 )
2019-06-18 00:15:41 -05:00
Scott Lahteine
6b2d42434c
Wrap main menu external declarations
2019-06-17 21:44:56 -05:00
Scott Lahteine
aacb904e1f
Adjust some config comments
2019-06-17 20:22:07 -05:00
Scott Lahteine
651f3eeed0
Clean up trailing whitespace
2019-06-17 20:22:07 -05:00
Ludy
35aabd1834
Fix Spindle/Laser compile error ( #14312 )
2019-06-17 18:38:43 -05:00
Scott Lahteine
21f377d94a
STM32F1: various small changes ( #14313 )
...
- init the led pin as output (like other HALs)
- reduce sdio dma priority to normal.. highest is never the best...
- allow fsmc only on compatible STM32F1 (like HAL fsmc)
- fsmc: remove an useless C style cast
2019-06-17 17:48:50 -05:00
sensei73
ce5f94c8f4
Fix Touch-MI sanity checks ( #14316 )
2019-06-17 17:46:14 -05:00
Tanguy Pruvot
287df7a61f
STM32F1: various small changes
...
- init the led pin as output (like other HALs)
- reduce sdio dma priority to normal.. highest is never the best...
- allow fsmc only on compatible STM32F1 (like HAL fsmc)
- fsmc: remove an useless C style cast
2019-06-17 10:27:30 +02:00
3DSmitty
66d51272af
Fix SPI, SD for BIGTREETECH SKR Mini ( #14287 )
2019-06-15 18:12:05 -05:00
Scott Lahteine
903863dcb6
Suppress some warnings
2019-06-15 17:47:59 -05:00
Scott Lahteine
eb1c9113c2
Try to init SD with no detect pin
2019-06-15 15:36:48 -05:00
Scott Lahteine
9a56a88200
Use OUT_WRITE in SPI pin init
2019-06-15 15:36:43 -05:00
Scott Lahteine
24c23b60fa
Use lambda, fix wrap pointer
2019-06-15 15:36:42 -05:00
pinchies
3021097888
Add JGAurora A5S and A1 (STM32F103ZET6) ( #14291 )
...
- Now compiles and works correctly with changes to HAL timers and watchdog.
- Does NOT include awesome work on touch screen function.
- Does have working LCD and SD-based EEPROM.
2019-06-15 14:28:22 -05:00
Ludy
6fb3db1633
Update German language ( #14294 )
2019-06-15 14:26:14 -05:00
Scott Lahteine
a17f057daa
Fix word wrapping on select screens
2019-06-15 14:06:23 -05:00
Tanguy Pruvot
f2cfa408b7
Touch-MI probe by hotends.fr ( #14101 )
...
A simple Z probe using a magnet to deploy a probe. See https://youtu.be/E7Ik9PbKPl0 for the sensor description...
2019-06-14 22:19:48 -05:00
Scott Lahteine
26de051e92
HAL SPI pin init cleanup
2019-06-14 20:17:25 -05:00
Scott Lahteine
50c9b33ed7
!ENABLED => DISABLED
2019-06-14 00:44:49 -05:00
teemuatlut
29afd11cbf
Updates for TMC2660 init ( #14245 )
2019-06-13 23:16:10 -05:00
Scott Lahteine
dfdbd1e75f
Use TEST macro where possible
2019-06-13 20:59:12 -05:00
teemuatlut
12a270fd29
Fix TMC5160 and TMC2160 PWMCONF init
2019-06-13 20:57:12 -05:00
Scott Lahteine
fc73a8b004
Add AXIS_HAS_SQUARE_WAVE shorthand
2019-06-13 20:57:12 -05:00
mb300sd
bf8bfb5c66
Add Coolant Control M7/M8/M9 ( #10745 )
2019-06-13 18:43:11 -05:00
Aliaksei Kvitsinski
648a91bce8
Support for Z-Bold board ( #14024 )
2019-06-13 03:21:18 -05:00
MastS
18904c42f6
Fysetc LCD backlight timeout ( #14265 )
2019-06-12 21:59:39 -05:00
Scott Lahteine
bc2ff9b41f
Fix M605 bugs
...
Fixes #14191
2019-06-12 20:01:08 -05:00
Scott Lahteine
f7792c0192
Group manual move options
2019-06-12 19:49:18 -05:00
Tanguy Pruvot
7d1eafc80a
STM32F1: C++14 for static_assert, etc. ( #14278 )
2019-06-12 18:44:32 -05:00
Msq001
26e7e33698
Fix bug in STM32F1 WRITE macro ( #14275 )
2019-06-12 06:30:24 -05:00
Scott Lahteine
04715e04ee
Minor M100 cleanup
2019-06-12 06:14:40 -05:00
Scott Lahteine
356410dcfc
Move crc16 function to libs
2019-06-12 06:14:39 -05:00
Scott Lahteine
2a96d4e23a
Move number-to-string functions to libs
2019-06-11 07:51:47 -05:00
Scott Lahteine
1ef95013f0
Update Marlin.cpp includes, defines
2019-06-11 07:30:51 -05:00
Kaushik Vemparala
c88d9ae282
Option to leave heaters set on SD abort ( #14251 )
2019-06-10 23:57:55 -05:00
Tanguy Pruvot
8cf5504a34
Redundant but faster recovery.enabled test ( #14175 )
2019-06-10 23:33:35 -05:00
Tanguy Pruvot
c3e5225531
Add SPI EEPROM to STM32F1 ( #14239 )
2019-06-10 23:30:23 -05:00
felixstorm
9439fab7fd
Fix ESP32 servos, platformio.ini, etc. ( #14247 )
2019-06-10 23:22:19 -05:00
yangwenxiong
b0a4ea79b8
BigTreeTech SKR Mini v1.1 ( #14041 )
2019-06-10 21:10:51 -05:00
Robby Candra
f30b89953d
runout.distance_mm LCD edit item ( #14066 )
2019-06-10 20:18:06 -05:00
mikeshub
a3f034b95e
FFCP updates. Update XY soft endstops on tool_change ( #14125 )
2019-06-10 18:01:42 -05:00
InsanityAutomation
b7eeb5b13b
Move BLTouch options to adv config ( #14131 )
...
Plus other BLTouch and menu enhancements.
2019-06-10 17:46:42 -05:00
Scott Lahteine
0ca2073625
ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED => SD_ABORT_ON_ENDSTOP_HIT
2019-06-10 17:28:35 -05:00
thisiskeithb
662e7da8a4
Fix USE_BIG_EDIT_FONT bug ( #14252 )
2019-06-09 19:37:14 -05:00
teemuatlut
cccc51ee0e
TMC Square Wave Stepping mode ( #14195 )
2019-06-09 05:08:05 -05:00
Scott Lahteine
80ce0d2bdb
Whitespace cleanup
2019-06-08 06:40:44 -05:00
Scott Lahteine
455f0de817
Undefine sanity check tests when done
2019-06-08 06:29:28 -05:00
Robby Candra
7e07a3888b
Fix PLR Z bug affecting Cartesians ( #14230 )
2019-06-08 05:27:58 -05:00
Robby Candra
5ca8d51e12
Ability to insert G-code in front of queue ( #14229 )
2019-06-08 05:23:53 -05:00
BigIronGuru
293018f76c
Apply needed BLTouch patch ( #14233 )
2019-06-07 21:43:20 -05:00
Scott Lahteine
ffb76b75d7
fix TMC2208 boot loop with SW UART ( #14135 )
...
Need stepper .begin() before calling susbequent .push()
2019-06-07 07:27:10 -05:00
InsanityAutomation
4138b1f9ae
Option to disable Case Light brightness control ( #14165 )
2019-06-07 07:23:42 -05:00
Tanguy Pruvot
764f0d9c1c
STM32F1: Servo "soft" PWM via timer interrupt ( #14187 )
2019-06-07 07:11:48 -05:00
InsanityAutomation
66e22d9f5a
ExtUI Heated Chamber support ( #14198 )
2019-06-07 07:08:41 -05:00
Scott Lahteine
9206c0e869
Use limit switch overrides
2019-06-05 22:27:06 -05:00
Scott Lahteine
34d2801bbe
Rename pins file (2)
2019-06-05 21:41:58 -05:00
Scott Lahteine
fa3b5fb059
Uppercase pins filename
2019-06-05 21:41:58 -05:00
Scott Lahteine
858b2fa21a
Fix thermistor table
2019-06-05 21:39:39 -05:00
InsanityAutomation
f6ec00d776
Update thermistor and working config
2019-06-04 20:25:00 -04:00
InsanityAutomation
bbcb61e042
Initial Commit - Add board
2019-06-03 23:49:19 -04:00
Tanguy Pruvot
e4260a41cb
Fix a DEBUG_LEVELING_FEATURE string copy ( #14200 )
2019-05-31 18:52:11 -05:00
Ryan
9d9030a39c
Fix Archim1 SD card ( #14184 )
2019-05-30 19:58:38 -05:00
InsanityAutomation
123e58d9c3
Heated Chamber for Graphical LCD ( #14190 )
2019-05-30 18:31:50 -05:00
Scott Lahteine
93ab16c6e4
Remove old mixing ISR comment
2019-05-30 17:05:16 -05:00
Scott Lahteine
6572848d7f
Fix stepper timing bug
2019-05-30 16:58:53 -05:00
Bob Kuhn
688b54d66a
DUE USB composite device field corrections ( #14185 )
2019-05-30 16:26:48 -05:00
InsanityAutomation
f889cc6ea6
ExtUI parity with SPI LCDs ( #14172 )
2019-05-30 16:24:13 -05:00
Scott Lahteine
07021c85c8
Tweak timer16_Sequence_t
2019-05-30 16:09:37 -05:00
Roman Moravčík
d70929f7c0
Update Slovak language ( #14179 )
2019-05-30 15:57:14 -05:00
Tanguy Pruvot
e3a468f2cd
STM32F1: FSMC only on chips with 100/144 pins ( #14180 )
2019-05-30 15:51:02 -05:00
Ludy
8e8e48f900
Fix links in templates, gcode.h ( #14160 )
2019-05-28 21:39:55 -05:00
InsanityAutomation
34ae76025e
Clear Pausing message after M600 park ( #14171 )
2019-05-28 21:36:14 -05:00
Ludy
bd494a6bd6
Update defines for patched temperature macros ( #14161 )
2019-05-28 17:43:31 -05:00
doggyfan
e09d8811c1
Apply grace period to thermistor failure testing ( #14167 )
2019-05-28 15:36:03 -05:00
InsanityAutomation
0f04ba016f
Adjust tool offset menus ( #14153 )
2019-05-27 21:29:08 -05:00
teemuatlut
bf4a0db97f
TMC LCD followup ( #14134 )
2019-05-27 21:24:20 -05:00
Minims
32afe1d102
Fix TOOLCHANGE_ZRAISE warning ( #14156 )
2019-05-27 19:51:29 -05:00
Robby Candra
5515f88452
Clarify SD longname string size ( #14148 )
2019-05-27 19:50:48 -05:00
Tanguy Pruvot
5f42d3a8b4
BLTouch French updates ( #14137 )
2019-05-27 01:02:35 -05:00
Scott Lahteine
d3bb5b69ba
Apply NOLESS/NOMORE
2019-05-26 20:55:00 -05:00
Scott Lahteine
b315157053
Apply const to mcp4728
2019-05-26 20:54:24 -05:00
Scott Lahteine
3c179bbd47
Simpler G28 home axis conditions
2019-05-26 16:26:55 -05:00
Scott Lahteine
352734494b
Reduce some M43 strings
2019-05-26 16:21:28 -05:00
Scott Lahteine
b14cc0d7c5
Remove extra gcode. prefix
2019-05-26 16:18:45 -05:00
Scott Lahteine
c6d39319de
Fix some whitespace
2019-05-26 16:18:43 -05:00
InsanityAutomation
212860f090
Always change to Tool 0 on G29 ( #14146 )
2019-05-26 14:53:21 -05:00
Giuliano Zaro
7b838f31be
DUE HAL cleanup ( #14126 )
2019-05-26 14:51:32 -05:00
Chris
36a0376c36
fix TMC2208 boot loop with SW UART
...
Need stepper .begin() before calling susbequent .push()
2019-05-26 13:07:12 +02:00
Robby Candra
df7733425c
Shorten pause message for 4 line LCD ( #14097 )
2019-05-26 02:33:52 -05:00
Scott Lahteine
605ec0a478
Fix thermistor table warning
2019-05-26 01:30:20 -05:00
doggyfan
90121047d9
Fix thermal protection with user thermistor ( #14130 )
2019-05-25 23:37:08 -05:00
Scott Lahteine
81cee05476
Update some env in pins.h
2019-05-25 23:17:50 -05:00
Scott Lahteine
47fd74a98d
Clean up fast_pwm.cpp
2019-05-25 23:05:01 -05:00
Scott Lahteine
49229d97db
Consistent _useTimerX tests
2019-05-25 23:05:01 -05:00
Scott Lahteine
8924389dfc
Tweak servo µs macros
2019-05-25 22:33:51 -05:00
InsanityAutomation
49e83dd7c8
BLTouch V3.1 changes ( #14104 )
2019-05-25 21:56:47 -05:00
Scott Lahteine
14fe41f6b2
Update Z probe offset comment
2019-05-25 19:41:15 -05:00
Scott Lahteine
f8bede6b5e
Fix some HAL includes
2019-05-25 19:20:17 -05:00
Bryan
0ef5d667b6
Fixed M43 parameter bug ( #14099 )
2019-05-25 18:23:25 -05:00
teemuatlut
1c86fbc60b
TMC updates, capture LCD changes ( #14074 )
2019-05-25 18:22:12 -05:00
felixstorm
74f44783ac
ESP32 servo support ( #14109 )
2019-05-25 18:12:24 -05:00
felixstorm
bc5a1fe562
Various fixes for ESP32 ( #14102 )
2019-05-25 17:06:00 -05:00
Giuliano Zaro
e1bf34bdc9
Ruramps4d typo fix ( #14096 )
2019-05-25 16:41:08 -05:00
Scott Lahteine
7cce6b8d68
Bring configs up to date (MANUAL_FEEDRATE)
2019-05-25 16:31:13 -05:00
Scott Lahteine
44caf70917
Improve editing, fix some small value editing
2019-05-25 15:29:00 -05:00
Scott Lahteine
612eaa87bd
Fix "back" items in some sub-menus
2019-05-25 15:28:52 -05:00
Scott Lahteine
c5dc2e5a71
Update advanced BLTouch menu items
2019-05-25 15:26:25 -05:00
Scott Lahteine
48d1bd29cb
Shift m before compare to 0
2019-05-25 15:22:15 -05:00
InsanityAutomation
9f69fbe5ee
Move some menu items ( #14118 )
2019-05-25 15:16:00 -05:00
Scott Lahteine
fc52c43a26
Some documentation updates
2019-05-24 16:30:44 -05:00
Tanguy Pruvot
24b1818245
Secure STM32F1 servo code and M280 detach ( #14085 )
2019-05-22 16:57:19 -05:00
Scott Lahteine
a49919396a
LPC1768 MarlinServo => libServo
2019-05-22 16:54:52 -05:00
Scott Lahteine
2b5046659a
Tweak Marlin headers, comments
2019-05-22 16:54:52 -05:00
Scott Lahteine
cc862a8213
Replace some functions with lambdas
2019-05-22 16:54:35 -05:00
Ludy
fafd73a3af
Update copyright in headers ( #14092 )
2019-05-22 16:24:13 -05:00
Giuliano Zaro
2298923a9b
Update Italian language ( #14095 )
2019-05-22 16:23:41 -05:00
Ludy
41f61a12b8
Update German language ( #14093 )
2019-05-22 16:23:16 -05:00
doggyfan
594f6b14be
Limit user thermistor to 999, fix thermistor table macro ( #14080 )
2019-05-21 21:31:05 -05:00
Giuliano Zaro
a74aad3b4a
Clean up HALs / FastIO ( #14082 )
2019-05-21 18:28:12 -05:00
Scott Lahteine
4ef364a073
Sanity check probe offsets must be integers
2019-05-21 17:16:21 -05:00
Scott Lahteine
cfca07852a
Backlash linker error workaround
...
Fix #14045
2019-05-20 21:52:56 -05:00
Scott Lahteine
aeec9ef76b
Update backlash code
2019-05-20 21:34:08 -05:00
Scott Lahteine
7b4c3bd92a
Fix call to synchronize in lcd_pause_job
2019-05-19 15:51:45 -05:00
Scott Lahteine
9bf65eacaa
Remove old adv config heading
2019-05-19 15:24:01 -05:00
Pavel4e5
3cd19a8ec0
Improve Zonestar keypad responsiveness ( #14056 )
2019-05-18 20:52:55 -05:00
Tanguy Pruvot
402f1f7307
STM32F1: STM32_HIGH_DENSITY is auto defined in HAL ( #14057 )
...
- Fix the `fsmc` and `sdio` units which required hard defines for use.
2019-05-18 20:45:22 -05:00
Tanguy Pruvot
87e7193259
Fix M226 sign warning (for most platforms) ( #14049 )
2019-05-18 16:15:48 -05:00
Tanguy Pruvot
256f810df2
Add open-drain output mode to STM32F1 FastIO ( #14050 )
...
- This mode is often used/preferred to drive printer boards' MOSFETs.
- Can generally boost the allowed output power (for hotbed,nozzle and fans).
2019-05-18 16:12:00 -05:00
Bob Kuhn
1dad6e754b
Neopixel background LED option ( #14025 )
2019-05-18 02:36:37 -05:00
InsanityAutomation
84ac5b360b
Fix ExtUI mesh functions ( #14027 )
2019-05-17 20:37:23 -05:00
Scott Lahteine
9b5f9dda0e
Update analog pins labels
2019-05-17 20:22:25 -05:00
FanDjango
85fb33a060
BLTOUCH tweaks, new v3.1 command ( #14015 )
2019-05-17 19:10:18 -05:00
GUEST.it
62ef54cb81
UBL: Log and display G29 progress ( #14036 )
2019-05-17 19:02:21 -05:00
GUEST.it
7907eec04c
Fix power loss recovery with SINGLENOZZLE ( #14033 )
2019-05-17 18:47:15 -05:00
Scott Lahteine
efe651e749
Add THERMISTOR_NAME for 1000
2019-05-17 18:26:53 -05:00
Scott Lahteine
0b056970c6
Fix file.open in STM32 eeprom emu
2019-05-17 18:26:53 -05:00
InsanityAutomation
06f3273531
Fix DELTA pulse wait bug ( #14028 )
2019-05-17 16:16:56 -05:00
Marcio Teixeira
7ccbcf2eaa
Fix TMC EEPROM regression ( #14008 )
...
Partially undo 15357af
to ensure TMC code is initialized in the proper order.
2019-05-16 20:38:03 -05:00
Marcio Teixeira
9558962d59
Fix DUE HAL SW SPI compile error ( #14005 )
2019-05-16 20:36:19 -05:00
InsanityAutomation
07afe69cee
Fix some bad AZTEEG_X5_MINI pins ( #14011 )
2019-05-16 20:33:00 -05:00
Chris Pepper
451ea996c9
[LPC176x] Fix switch fallthrough
2019-05-15 10:35:26 +01:00
Tanguy Pruvot
d7b0369e39
STM32: Fix SD EEPROM emulation conflict ( #14012 )
2019-05-15 02:42:10 -05:00
Scott Lahteine
785c01f2bc
Use US spelling of 'behavior'
2019-05-15 01:49:17 -05:00
Sam Lane
7f1e0c5670
Update EXTRA_LINADV_K with Marlin bit macros ( #13993 )
2019-05-15 01:07:07 -05:00
Bob Kuhn
48bd8899bd
Cohesion 3D Remix: Onboard SD card, Fysetc LCD ( #13991 )
2019-05-15 00:59:57 -05:00
FanDjango
dcaefc68a5
BLTouch.init should not deploy ( #13988 )
...
Low or unknown probe clearance on init (even at powerup) is a risk and therefore, a deploy should be avoided because dragging the pin is possible: A deploy goes into alarm if it can't extend fully and then the subsequent stow will fail.
2019-05-14 23:55:11 -05:00
Tanguy Pruvot
8075893352
STM32: fix sdcard filename conversion
2019-05-12 04:26:21 +02:00
chai-md
940ff8e7c8
Improve LV8729 stepping ( #13776 )
2019-05-11 19:02:19 -05:00
InsanityAutomation
991ee7552b
Restore menu edit to 32bit value ( #13976 )
2019-05-11 18:44:35 -05:00
Tanguy Pruvot
93dd097b1c
Use E2END, if defined, for STM32F1 (SD) ( #13981 )
2019-05-11 18:22:31 -05:00
InsanityAutomation
5108e4b6aa
Cleaner EEPROM auto init ( #13975 )
2019-05-11 16:54:03 -05:00
Bob Kuhn
456a0ee76b
Improve Due SW SPI, Fysetc sanity checks, &c. ( #13939 )
2019-05-11 16:51:39 -05:00
Robby Candra
7b78a20fb7
Fix: Debug Memory Dump size ( #13957 )
...
* Fix Memory Dump size
* Fix Compile error on Memory Dump
2019-05-11 11:44:39 -05:00
Scott Lahteine
a613bcad2d
Fix some spelling
2019-05-10 20:39:19 -05:00
Tanguy Pruvot
62b36d1b98
Fix STM32 timer warnings ( #13946 )
2019-05-10 20:00:21 -05:00
Giuliano Zaro
f22c9a1ae1
Fix G-code parser with MMU2 ( #13951 )
2019-05-10 19:57:15 -05:00
Marcio Teixeira
746c38f4be
Fix HAL_DUE multiple define error with graphical LCD ( #13971 )
2019-05-10 19:52:43 -05:00
Bob Kuhn
75eca5c4f8
Fysetc pins updates for RAMPS and SKR 1.3 ( #13963 )
2019-05-10 19:29:28 -05:00
Marcio Teixeira
227f29090d
Add heater timeouts to ExtUI ( #13970 )
...
- Add local UI methods to get heater timeout state.
- Add methods to resume timed-out heaters.
- Re-enable heaters on UI temperature request.
- Make `ExtUI` show a dialog box if pause needs a button press after reheat.
2019-05-10 15:56:13 -05:00
Bob Kuhn
fa3739aa23
M100: LPC1768 and DUE compatibility ( #13962 )
2019-05-09 21:57:44 -05:00
InsanityAutomation
3f758d9e00
Fix some edit items for 16-bit encoder ( #13948 )
2019-05-09 18:28:47 -05:00
ManuelMcLure
51acbb2201
Prevent HOST_PROMPT_SUPPORT compile error ( #13943 )
2019-05-09 11:48:31 -05:00
Scott Lahteine
ad4ffa1d2f
Use C++ language supported 'nullptr' ( #13944 )
2019-05-09 11:45:55 -05:00
Tanguy Pruvot
e53d7e5517
STM32: ADC warning fix ( #13933 )
2019-05-09 00:33:38 -05:00
Scott Lahteine
23ec650410
Consolidate Malyan LCD and ExtUI
2019-05-07 21:31:30 -05:00
InsanityAutomation
6811e2921b
BLTouch v3 / 3DTouch Interoperability & performance ( #13814 )
2019-05-07 21:25:54 -05:00
Giuliano Zaro
40aff7e1f2
Remove extra MMU (non-12V) code ( #13938 )
...
`check_version` in state -5 should not be needed since it has already been called in state -4 and the tested build nr is only updated in state -4.
2019-05-07 21:02:08 -05:00
Tanguy Pruvot
11adcf1ce3
Add'l PLR options, AVR strstr_P compat ( #13880 )
2019-05-07 20:38:40 -05:00
InsanityAutomation
5dcb25664f
Option to Auto-Initialize EEPROM ( #13935 )
2019-05-07 16:30:31 -05:00
Ludy
a504366138
Fix probe fan compiling error ( #13930 )
2019-05-07 14:14:12 -05:00
Tanguy Pruvot
24e956d168
Avoid int8_t underflow on filament runout ( #13895 )
2019-05-07 13:58:10 -05:00
Stephan
483822f3aa
Fix some THERMAL_PROTECTION_CHAMBER issues ( #13678 )
2019-05-06 19:55:01 -05:00
doggyfan
23a8707ef1
Configurable Thermistor ( #13888 )
2019-05-06 18:51:06 -05:00
J.C. Nelson
172abc305b
Malyan M200 core fixes ( #13927 )
2019-05-06 18:07:13 -05:00
Scott Lahteine
a36782ac1d
Define more u8g command macros
2019-05-06 17:26:34 -05:00
Scott Lahteine
f9a50f451d
Serial out cleanup
2019-05-06 17:26:34 -05:00
Scott Lahteine
9853331b34
Fix temp init, loosen ADC grace period
2019-05-05 22:55:03 -05:00
Tanguy Pruvot
a4c24511f7
STM32: Fix Marduino SBI/CBI redefine ( #13912 )
2019-05-05 22:06:30 -05:00
Ludy
c837e9250c
Define tmc variables where needed ( #13918 )
2019-05-05 22:04:47 -05:00
Ludy
f96eaad1ea
Unused variable cleanup ( #13917 )
2019-05-05 22:01:04 -05:00
Ludy
421d526ba7
Update German language ( #13915 )
2019-05-05 22:00:19 -05:00
Giuliano Zaro
b07360f32a
Update Italian language ( #13916 )
2019-05-05 21:59:34 -05:00
Robby Candra
79955f0c89
Fix PLR file delete bug ( #13860 )
2019-05-04 23:30:47 -05:00
ManuelMcLure
09f1b58146
Fix HOST_PROMPT_SUPPORT compile issue ( #13847 )
2019-05-04 22:55:51 -05:00
Giuliano Zaro
e2a77ed881
Bring chamber temp to completion ( #13837 )
2019-05-04 22:51:47 -05:00
Robert Mendon
24177954dd
Add missing AZSMZ Mini SPI pins ( #13824 )
2019-05-04 22:04:01 -05:00
kAdonis
ee73e17c9b
Hide 'vsense' report row if not used ( #13884 )
2019-05-04 22:00:24 -05:00
jmdearras
68004174d9
Fix thermistor 501 name ( #13839 )
2019-05-04 21:40:41 -05:00
Bob Kuhn
c48e6be366
Fysetc panel, RUMBA and ReARM pins, SPI mode 3 ( #13900 )
2019-05-04 17:59:36 -05:00
Chris
fd9d3ae181
Re-Arm 4x TMC2208 stepper improvement ( #13819 )
2019-05-04 17:26:13 -05:00
Tanguy Pruvot
e7b3720b81
Menu edit accel in increments of 25 ( #13850 )
2019-05-04 17:21:58 -05:00
Tanguy Pruvot
7da63fa03f
Fix NOMORE() sign warning in stepper ( #13894 )
2019-05-04 15:59:38 -05:00
Roman Moravčík
6d0ce033c2
Update Slovak language. ( #13840 )
2019-05-04 15:58:01 -05:00
InsanityAutomation
3fcab8dbf1
Option to disable fans during pause ( #13820 )
2019-05-04 15:50:44 -05:00
Chris Pepper
66f7065248
[LPC176x] Update extra script to support Python3 ( #13908 )
2019-05-04 20:52:28 +01:00
Scott Lahteine
2f32a6612d
Clean up Temperature::set_fans_paused
2019-05-04 14:36:59 -05:00
Marcio Teixeira
15357af67c
Backlash cleanup ( #13659 )
...
…And save backlash, fil. sensor, ExtUI userdata to EEPROM.
2019-05-03 23:53:15 -05:00
Robby Candra
0181e57417
Add a minimum Z change option to power-loss recovery ( #13859 )
2019-05-02 22:29:05 -05:00
Robby Candra
c369477cb0
Fix bug: diveToFile breaks M23 ( #13865 )
2019-05-02 15:54:24 -05:00
Tanguy Pruvot
e5438a9a03
settings: store runout sensor on/off ( #13876 )
2019-05-02 00:47:26 -05:00
Scott Lahteine
e7682eea42
Use Arduino.h include wrapper ( #13877 )
2019-05-02 00:45:50 -05:00
Tanguy Pruvot
51d1e0f1dd
Auto-mount the SDIO SD card ( #13879 )
2019-05-02 00:45:21 -05:00
Thomas Moore
ee243e4edf
Fix mixing extruder filament change ( #13803 )
2019-05-01 21:55:58 -05:00
Scott Lahteine
bf54251a10
Finish, improve, clean up FYSETC_MINI_12864 revisions ( #13871 )
2019-05-01 20:05:29 -05:00
Scott Lahteine
9372e2603c
Simpler neopixel comment
2019-05-01 13:55:51 -05:00
Tanguy Pruvot
3272d0db01
Update French language ( #13866 )
2019-05-01 13:00:07 -05:00
Chris Pepper
95beafa9a2
Fix typo
2019-05-01 16:30:21 +01:00
Ludy
408a5f08dc
Update German language ( #13853 )
2019-05-01 01:25:57 -05:00
Tanguy Pruvot
cf3c746029
Improve French language ( #13851 )
2019-05-01 01:12:25 -05:00
Clinton James
2740cc64d8
Add SD Release when no SD_DETECT_PIN exists ( #13857 )
2019-05-01 01:00:21 -05:00
Luu Lac
39ebca6b5f
Fix FYSETC, MINIPANEL, MKS_MINI_12864 display ( #13864 )
2019-05-01 00:37:52 -05:00
Giuliano Zaro
93dcb537ef
Update Italian language ( #13809 )
2019-04-30 20:31:40 -05:00
Roxy-3D
142c8e2fed
Remove redundant Frivolous Game Options
2019-04-28 14:03:53 -05:00
Scott Lahteine
e43afb1a58
Clean up SKR pins
2019-04-27 14:56:12 +02:00
Scott Lahteine
9ccbd382e7
Update Watchdog description
2019-04-27 14:56:12 +02:00
Scott Lahteine
b6279abd30
Better THERMAL_PROTECTION_GRACE_PERIOD
...
See #13783
2019-04-27 14:40:09 +02:00
chai-md
ed9eaa1942
Fix a comment in fwretract.cpp ( #13802 )
2019-04-26 09:36:29 +02:00
InsanityAutomation
610fb46683
Fix some ExtUI issues ( #13799 )
2019-04-26 09:32:01 +02:00
Bob-the-Kuhn
db89fc0304
Revert "bring my copy up to date"
...
This reverts commit 503905c628
.
2019-04-25 17:38:41 -05:00
Bob-the-Kuhn
503905c628
bring my copy up to date
2019-04-25 12:08:49 -05:00
Bob-the-Kuhn
73726d56b3
Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x
2019-04-25 12:06:01 -05:00
Scott Lahteine
5051909c3c
Update do_select_screen for general use ( #13800 )
2019-04-24 10:13:44 -05:00
Scott Lahteine
63f6ad3fd2
Basic RAMPS SD_DETECT_PIN override
2019-04-23 18:10:21 -05:00
InsanityAutomation
c6632925e3
Force no move on IDEX full control mode ( #13797 )
2019-04-23 15:20:59 -05:00
Giuliano Zaro
e2dd2268e8
Add a Z raise-between-probes to G34 ( #13791 )
2019-04-23 13:40:55 -05:00
Giuliano Zaro
0f9c49ccba
Update Italian language ( #13790 )
2019-04-23 13:36:05 -05:00
Giuliano Zaro
d77ef437db
Fix warning for redefined DEBUG_PRINT_P ( #13789 )
2019-04-23 13:35:02 -05:00
Marcio Teixeira
ca7f6ff287
Fix MSG_En messages for consistency ( #13788 )
2019-04-23 13:31:51 -05:00
Scott Lahteine
6ff81a33c1
Provide JSON values for SOFT_PWM_SCALE
2019-04-22 14:06:14 -05:00
Scott Lahteine
0c4d3e6622
Improve M906 description
2019-04-22 13:48:02 -05:00
Tanguy Pruvot
04ae3ba1fd
Major update to French language ( #13784 )
2019-04-22 13:31:04 -05:00
chai-md
78d7349fd7
Remove extra Z raises in tool change ( #13782 )
2019-04-21 21:06:46 -05:00
Kajetan Rzepecki
875e673a8c
Add HAL-based thermal protection grace period for all heaters ( #13778 )
2019-04-21 20:50:32 -05:00
Bob Kuhn
81ca5a4cd4
Fix and improve FYSETC LCD support ( #13767 )
2019-04-21 20:48:53 -05:00
felixstorm
4e35e6c705
Fix SS pin in ESP32 HW SPI ( #13781 )
2019-04-21 17:15:15 -05:00
felixstorm
4a48b70c0b
Fix (re-)defines in HAL_ESP32 ( #13780 )
2019-04-21 17:14:38 -05:00
Ludy
4228fd3e03
Update German language ( #13769 )
2019-04-20 15:01:56 -05:00
Kajetan Rzepecki
5f70c876ae
Fix _temp_error-related compile error ( #13768 )
2019-04-20 13:57:38 -05:00
Kajetan Rzepecki
ea1ee02b53
Disable hardware PWM on ESP32 I2S expander ( #13762 )
2019-04-20 13:41:17 -05:00
Scott Lahteine
bddb776ddb
Add chamber max-temp check
...
Followup to #13756
2019-04-19 22:18:55 -05:00
Marcio Teixeira
d0c1eee53b
Add extra max-temp safety checks ( #13756 )
2019-04-19 21:37:12 -05:00
Marcio Teixeira
4ac28ba6b3
Add missing file ( #13754 )
2019-04-19 20:20:45 -05:00
jmdearras
b65cb5704d
Fix, improve FYSETC_MINI_12864 support ( #13730 )
2019-04-19 20:11:51 -05:00
Scott Lahteine
69c333ead9
More universal Formbot pins
...
Replace `ROXYs_TRex` with pre-defines of the relevant pins at the configuration level.
2019-04-18 21:09:34 -05:00
Scott Lahteine
0a6835fbea
More robust HAS_LCD_CONTRAST
2019-04-18 21:09:34 -05:00
Marcio Teixeira
2e3d121ac4
Squelch compiler warning ( #13739 )
2019-04-18 13:18:49 -05:00
Kajetan Rzepecki
d83a7924e6
Fix ESP32 TOGGLE() with I2S expander ( #13743 )
2019-04-18 13:15:35 -05:00
Jimmy Wennlund
e6f6ed76c8
Show UBL Activate/Deactivate menu for current state ( #13744 )
2019-04-18 13:13:05 -05:00
Marcio Teixeira
08f21335a6
Fix bad opcode in LIGHTWEIGHT_UI; add 32-bit HAL and Due compatibility ( #13751 )
2019-04-18 13:10:58 -05:00
Kajetan Rzepecki
7c8ee0cd5b
Enable more ADC1 channels (pins 32-39) ( #13742 )
2019-04-18 13:01:24 -05:00
Bob-the-Kuhn
520585c5ed
Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x
2019-04-17 15:34:29 -05:00
Kajetan Rzepecki
e1acc09c6e
Fix LPC1768 HAL SSD* screen init ( #13741 )
2019-04-17 14:57:50 -05:00
Marcio Teixeira
836435c5ef
Fix action_edit int range bug ( #13737 )
2019-04-17 14:55:31 -05:00
Antonio Pérez
bf28ad4b6c
Fix clear of Z position last digit ( #13731 )
2019-04-17 14:52:20 -05:00
Marcio Teixeira
866e2d41dc
Correct range of LCD axis step editing ( #13727 )
2019-04-16 15:45:31 -05:00
Scott Lahteine
ab8052887f
Add missing MSG_PAUSE_PRINT_INIT_1 for en
2019-04-16 13:54:20 -05:00
petrzjunior
12d340cf2a
Update Czech language ( #13729 )
2019-04-16 13:53:14 -05:00
Robby Candra
e8dc87a2b7
Fix updated Allen Key pause probe logic ( #13723 )
2019-04-16 12:35:58 -05:00
Robby Candra
7ca1fea22b
Option to pause probe deployment only when triggered, for manually-deployed allen-key probe ( #13698 )
2019-04-16 01:32:43 -05:00
Robby Candra
35160dfb7a
Simplify PLR homing when Z homes to max ( #13718 )
2019-04-16 00:17:27 -05:00
Scott Lahteine
92ed9a2bb6
Fix is_M29
...
Followup for #13013
2019-04-15 23:47:06 -05:00
jmdearras
5f49b65c1f
Move LPC SD options to configs, add MKS_MINI_DISPLAY to SKR boards ( #13712 )
2019-04-15 22:55:33 -05:00
Bob Kuhn
9b578ca343
Support FYSETC_MINI_12864 on Re-ARM, RAMPS_FD, MKS SBASE ( #13717 )
2019-04-15 22:54:11 -05:00
Scott Lahteine
9992c424f5
Patch G92.9 flags
...
Followup to #13703
2019-04-15 20:26:40 -05:00
ManuelMcLure
b1c13bce58
Fix EEPROM_CHITCHAT (and debug_out.h) ( #13716 )
2019-04-15 20:21:26 -05:00
Msq001
455ee23499
Fix, improve Power Loss Recovery ( #13703 )
...
- Save and restore workspace offsets
- Add retract and purge (hidden) options
- Always restore axis relative modes
- Use added `G92.9` to do position restores
2019-04-15 18:53:39 -05:00
Laurent
df75a606ff
Support MKS SGen board ( #13694 )
2019-04-15 17:03:10 -05:00
Kajetan Rzepecki
20dc45bca7
Refactor, fix ESP32 WebSocketSerial ( #13689 )
2019-04-15 16:32:20 -05:00
Roman Moravčík
db373f130c
Update Slovak language ( #13692 )
2019-04-15 16:14:49 -05:00
Kajetan Rzepecki
6fe90f0324
Define I2S pins for ESP32 ( #13714 )
2019-04-15 16:13:59 -05:00
InsanityAutomation
aa0f7afbe6
Fix call to uninitialized PWM pin, heater 2 overlap ( #13674 )
2019-04-15 15:57:34 -05:00
Bob-the-Kuhn
57aaa9110b
Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x
2019-04-13 21:14:52 -05:00
Scott Lahteine
6a71df2925
Tweak babystep add_steps
2019-04-13 14:14:26 -05:00
Bob-the-Kuhn
9dd4252b39
Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x
2019-04-12 22:07:12 -05:00
Marcio Teixeira
bdfffee037
Modify Z-offset overlay for clarity ( #13660 )
2019-04-12 15:43:29 -05:00
Stephan
84273557f9
Move and update heated chamber settings ( #13671 )
...
Co-Authored-By: the-real-orca <stephan.veigl@gmail.com>
2019-04-12 15:38:10 -05:00
Ludy
62b4265410
Update German language ( #13665 )
2019-04-12 14:48:13 -05:00
Scott Lahteine
b18316dd37
Fix some spacing
2019-04-12 13:35:42 -05:00
Scott Lahteine
f2ba0a5ae7
Tweak some formatting
2019-04-12 13:15:37 -05:00
Scott Lahteine
7e58d33a2e
Update some headers
2019-04-12 13:04:04 -05:00
Giuliano Zaro
64ee064ded
Update Italian language ( #13661 )
2019-04-12 12:22:43 -05:00
Scott Lahteine
14b561f182
Extra AxisEnum values for E0-E5
2019-04-12 12:13:48 -05:00
Robby Candra
9e86fc3831
Require homing to toggle leveling ( #13652 )
2019-04-11 14:09:41 -05:00
Ludy
9fd3e64ba8
Fix compile error with EXTRUDER>1 ( #13651 )
2019-04-11 13:58:50 -05:00
Jamie
509dc283f2
Restore declarations of G53-G59 ( #13654 )
2019-04-11 13:51:05 -05:00
chai-md
2adc37becc
MAGNETIC_SWITCHING_TOOLHEAD ( #13629 )
2019-04-11 13:29:17 -05:00
ManuelMcLure
492883859e
Don't protect unused CS pins ( #13647 )
2019-04-10 21:57:57 -05:00
Scott Lahteine
9898f53361
Fix missing IS_SD_PRINTING
2019-04-10 21:48:16 -05:00
Scott Lahteine
1e59a2ac73
Hide pause/stop unless active printing
2019-04-10 19:46:59 -05:00
Scott Lahteine
ae42206500
Fix SD_REPRINT_LAST_SELECTED_FILE
2019-04-10 17:43:08 -05:00
Scott Lahteine
d72946a8d7
Fix LPC1768 build with no watchdog
...
Fix issue mentioned at https://github.com/MarlinFirmware/Marlin/pull/13587#issuecomment-481737509
2019-04-10 17:34:15 -05:00
Scott Lahteine
cee3b172b9
Fix Marlin splash screen logic ( #13646 )
2019-04-10 17:14:57 -05:00
ANMay-ru
052f2ac352
Fix RURAMPS4D baud rate ( #13644 )
2019-04-10 15:53:21 -05:00
Marcio Teixeira
e6ebd30f60
Fix LCD issue on stepper timeout ( #13630 )
...
- Remove a re-paint of the status screen on stepper timeout, which would cause a garbled LCD with `LIGHTWEIGHT_UI` and could interrupt whatever else the user might be doing in a submenu (such as playing games!)
- Use the helper function to reset stepper timeout.
2019-04-10 15:51:48 -05:00
klcjr89
a8edd4f6d4
Fix Azteeg X5 MINI BOARD_NAME ( #13632 )
...
Co-Authored-By: klcjr89 <klcjr89@users.noreply.github.com>
2019-04-10 15:46:12 -05:00
Scott Lahteine
5018fdacbe
Support FYSETC_MINI_12864_PANEL ( #13365 )
2019-04-09 18:34:29 -05:00
InsanityAutomation
4900c28bf6
Fix IDEX tool-change, and more ( #13614 )
2019-04-09 18:33:40 -05:00
InsanityAutomation
ba31d39f6d
Azteeg X5 Mini support ( #13425 )
2019-04-08 23:10:45 -05:00
Scott Lahteine
9cb5c57b84
Adjustments to ui8tostr_percent
2019-04-08 21:47:50 -05:00
Scott Lahteine
321a5e6580
Fix SD card reselect when scrolled ( #13624 )
...
- Change encoder position to 16-bit integer.
- Fix `SD_REPRINT_LAST_SELECTED_FILE` when the screen is scrolled.
2019-04-08 21:10:41 -05:00
Scott Lahteine
0e3c9e726d
Set default Raptor runout/caselight pins
2019-04-08 18:18:08 -05:00
Scott Lahteine
5e38d70697
Fix M217 report label, general cleanup
2019-04-08 18:18:08 -05:00
Scott Lahteine
fae2b7edc3
Update MMU2 code style
2019-04-08 18:13:42 -05:00
Scott Lahteine
c8a83fb122
SPINDLE_LASER_ENABLE => SPINDLE_LASER_ENA
2019-04-08 18:13:41 -05:00
Scott Lahteine
9abe9aff56
Confirm before starting SD print ( #13616 )
2019-04-08 13:44:35 -05:00
Scott Lahteine
7e0008f5b3
Fix SETCURSOR_RJ
2019-04-07 20:25:54 -05:00
Robby Candra
81c2c3ec11
Continuous filename scrolling ( #13609 )
2019-04-07 16:58:32 -05:00
Ludy
c29820f649
Suppress compile warning ( #13612 )
2019-04-07 16:53:30 -05:00
Scott Lahteine
a2b3ad6d0a
Don't override RGB LED pins, by default
2019-04-07 16:42:26 -05:00
Bob Kuhn
9a56d90150
Fix M43 on LPC176x ( #13587 )
...
The real fix. PR #13568 was wrong.
2019-04-06 18:06:07 -05:00
Roxy-3D
9cee81d47e
Option to show babysteps total since G28 ( #13580 )
2019-04-06 18:04:34 -05:00
Scott Lahteine
3221658a78
Adjust park position description
2019-04-05 20:40:50 -05:00
Scott Lahteine
028b78f623
Suppress a compile warning
2019-04-05 20:06:19 -05:00
Scott Lahteine
cf12fc8366
Expand on serial debugging ( #13577 )
2019-04-05 20:02:46 -05:00
Marcio Teixeira
bf7b28b456
Fix incorrect variable name ( #13585 )
2019-04-05 19:04:46 -05:00
Kajetan Rzepecki
27693cec29
Extend ESP32 HardwareSerial with flushTX. ( #13588 )
2019-04-05 19:04:02 -05:00
Alexander Gavrilenko
3c47e1b4d1
Support Black STM32F407VET6 with RAMPS-like shield ( #13524 )
2019-04-05 15:30:19 -05:00
VBen
0dfd76ba55
Fix Z hotend offset broken by parking extruder tool change ( #13582 )
2019-04-05 15:28:32 -05:00
Scott Lahteine
027a901bec
Trim whitespace
2019-04-05 15:04:23 -05:00
Kajetan Rzepecki
692a0198f9
Fix SPISettings frequency parameters in ESP32 HW SPI ( #13573 )
2019-04-04 23:17:14 -05:00
Kajetan Rzepecki
63d95862fa
Add FastIO TOGGLE for ESP32 ( #13574 )
2019-04-04 23:15:17 -05:00
drzejkopf
0992d1a4c8
Fix Invaders game compile error ( #13575 )
2019-04-04 23:13:11 -05:00
Robby Candra
cd1ef33c8c
Drop extra PLR save test ( #13554 )
2019-04-04 22:47:00 -05:00
Scott Lahteine
72c7751768
Fix SERIAL_POS in use with DEBUG_OUT
2019-04-04 22:12:03 -05:00
Scott Lahteine
cacec5764a
Clean up whitespace
2019-04-04 22:12:02 -05:00
Scott Lahteine
83e214478e
Click-hold to exit Invaders, fix Brickout compile
2019-04-04 17:07:50 -05:00
Scott Lahteine
240ea1bbb3
Split up games into separate files
2019-04-04 03:06:19 -05:00
Marcio Teixeira
27a4927ed1
Add option to move away from endstop after homing. ( #13557 )
...
Add option to move away from endstop after homing.
- Add `ENDSTOP_BACKOFF` for printers with a recessed Z home button (Lulzbot TAZ 6).
- Also prevents chattering when sensorless homing with axes against bumpers.
2019-04-04 02:47:19 -05:00
InsanityAutomation
d44e5b1fde
Fix stepper direction macros, multi-nozzle scope ( #13569 )
2019-04-04 02:44:07 -05:00
Scott Lahteine
10b9632bed
Fix menu history item selection
2019-04-04 02:41:23 -05:00
Scott Lahteine
f1810689ff
Fix bootscreen condition
2019-04-04 00:19:47 -05:00
Kajetan Rzepecki
b21ca53dfc
SPIFFS-backed PersistentStore for ESP32 ( #13566 )
2019-04-03 20:28:26 -05:00
Scott Lahteine
af92ee9dd6
No PLR include needed in queue.cpp
2019-04-03 18:26:31 -05:00
Scott Lahteine
5d2c5877f7
DOGM bootscreen cleanup
2019-04-03 18:10:50 -05:00
Scott Lahteine
2aa35e95af
More G26 arc cleanup
...
Followup to #13531
2019-04-03 16:03:21 -05:00
Scott Lahteine
20a41e2f7b
SDCARD_RATHERRECENTFIRST with SDCARD_SORT_ALPHA
2019-04-02 22:25:18 -05:00
Robby Candra
46445a5a16
Event G-code for Stop SD Print ( #13547 )
...
Co-Authored-By: 7eggert <7eggert@gmx.de>
Co-Authored-By: robbycandra <robbycandra.mail@gmail.com>
2019-04-02 22:09:30 -05:00
Kajetan Rzepecki
2cfa9e9008
Fixed chamber-related compile error ( #13552 )
2019-04-01 17:53:56 -05:00
Scott Lahteine
a0a5c31c05
Power-Loss initialization fix ( #13553 )
...
- Only save to PLR file on moves with E and X or Y
- Save to PLR after any long-ish Z downward move
2019-04-01 17:52:45 -05:00
Scott Lahteine
8b7c3eec83
Games, for fun (and stress-testing) ( #13464 )
2019-04-01 17:48:54 -05:00
InsanityAutomation
fbc7b51a24
Use NO_FETCH for Dual X G28 ( #13539 )
2019-04-01 17:48:21 -05:00
Scott Lahteine
5de7b5b35e
Games, for fun (and stress-testing) ( #13464 )
2019-04-01 15:43:48 -05:00
InsanityAutomation
4961d8aa3e
Update G28.cpp ( #13539 )
2019-03-31 19:50:40 -05:00
Scott Lahteine
de0046fc8b
Fix empty HAS_TIMER macros
2019-03-30 23:04:40 -05:00
Kajetan Rzepecki
c9079165ee
Fix MAX6675 readout with Hardware SPI ( #13530 )
2019-03-30 22:31:49 -05:00
ManuelMcLure
04086fc455
Minor optimization to ARC_SUPPORT code ( #13531 )
2019-03-30 22:29:37 -05:00
Robby Candra
a3f67acd6d
Fix Power Loss Recovery file delete ( #13522 )
2019-03-30 13:14:58 -05:00
Marcio Teixeira
d992dfe7d5
Use the percent util func in the string func. ( #13523 )
2019-03-30 13:00:31 -05:00
drzejkopf
b1f739e27b
CR10_STOCKDISPLAY support in Bigtreetech SKR ( #13516 )
2019-03-29 14:19:18 -05:00
Marcio Teixeira
5679fae11e
UltraLCD enhancements (lower fan resolution, backlash menu) ( #13519 )
2019-03-29 14:07:43 -05:00
Msq001
f0d14b83bc
Save/restore Relative modes in Power-Loss Recovery ( #13501 )
2019-03-29 13:40:42 -05:00
Marcio Teixeira
c6466c23fe
Silence signed/unsigned comparison warning. ( #13508 )
2019-03-29 13:33:45 -05:00
InsanityAutomation
7240e3a68f
Allow G26 with no heated bed ( #13511 )
2019-03-29 13:32:43 -05:00
Alexander Gavrilenko
6d9aaca082
Fix compilation error for MKS Robin ( #13506 )
2019-03-29 12:40:24 -05:00
Scott Alfter
c6dbe6e9d6
Fix Teensy 3.5/3.6 __get_primask ( #13514 )
2019-03-29 12:23:09 -05:00
Alexander Amelkin
e40636a7c1
Replace digitalPinHasPWM with HAS_TIMER ( #13520 )
2019-03-29 12:21:14 -05:00
Scott Lahteine
b46ca9aa94
Less timely comment, tweak conditions
2019-03-26 19:20:13 -05:00
InsanityAutomation
eb91f08725
Update descriptions and dont call unneeded functions
2019-03-26 11:24:52 -04:00
Ludy
fe346cd4d1
Fix DEBUG_EEPROM_READWRITE compile error ( #13492 )
2019-03-26 04:12:22 -05:00
Sam Lane
e3ab54753b
Add extra Linear Advance factors ( #13490 )
2019-03-26 04:02:27 -05:00
Chris Pepper
ffc2c2d7c5
Move FAST_PWM_FAN code to HALs ( #13491 )
2019-03-26 01:03:23 -05:00
Thomas Moore
263f8edff8
Disable volumetric extrusion during G26 ( #13479 )
2019-03-25 22:41:52 -05:00
Bob Kuhn
6bd0a0be97
Relocate DUE Stepper ISR to TC0,2 ( #13481 )
2019-03-25 22:39:51 -05:00
Thomas Moore
13a12f8a87
Fix UBL mesh editor on delta ( #13478 )
2019-03-25 22:04:57 -05:00
Scott Lahteine
d2e0c03afb
Remove trailing whitespace
2019-03-25 20:51:38 -05:00
Marcio Teixeira
7462fe3068
Fix compile error, squelch warnings ( #13487 )
...
- Fix path to `bedlevel.h` include file
- Add default to `case` statements to suppress warnings
2019-03-25 20:41:38 -05:00
Yannik Sembritzki
0d3ea59bcf
Add pins for Dual Z UART on SKR 1.3 ( #13474 )
...
Fix #13470
2019-03-24 20:09:00 -05:00
pinchies
ef3b93daa1
Fix STM32F1 SD-based EEPROM emulation ( #13475 )
...
If `openFile` is given `true`, then it has read-only access. Because all the writing occurs on the next line, this breaks SD card as EEPROM.
2019-03-24 20:07:31 -05:00
Chris Pepper
aacc1148b0
Fix M106 for index > extruders ( #13473 )
2019-03-24 20:03:53 -05:00
Thomas Moore
c5e96544b5
Fix vtool compiler warning ( #13476 )
2019-03-24 20:02:28 -05:00
Thomas Moore
02dc72acb6
Disable ABL when leveling corners ( #13471 )
2019-03-24 20:01:18 -05:00
7eggert
d96f7d6068
Minimum segments for G2/G3. Better for small arcs. ( #13466 )
2019-03-24 19:53:47 -05:00
Scott Lahteine
380c771988
Handle word-padded flash-based eeprom (STM32F1)
...
Fix #13445
2019-03-24 19:14:04 -05:00
Scott Alfter
32332bcd03
Proceed with Teensy 3.5/3.6 HAL ( #13450 )
2019-03-24 00:08:32 -05:00
Scott Alfter
407202cc0f
Fix BLTouch pre-3.0 compatibility ( #13454 )
2019-03-23 23:28:15 -05:00
Marcio Teixeira
a0ca98f699
Additional ExtUI features ( #13449 )
2019-03-23 23:09:18 -05:00
Sam Lane
a8fa275dc6
Fix Fan 0 responding to all fan speeds ( #13444 )
2019-03-23 23:00:31 -05:00
InsanityAutomation
5eeffab5e5
Fix BLTouch Menus ( #13441 )
2019-03-23 22:58:34 -05:00
Scott Lahteine
d8329d858d
Default argument to defer_status_screen
2019-03-23 16:33:37 -05:00
Giuliano Zaro
9562a02c5a
Update Italian language ( #13440 )
2019-03-20 18:26:55 -05:00
drzejkopf
70e6a3db8a
Add LEVEL_CORNERS_HEIGHT to LEVEL_BED_CORNERS ( #13439 )
2019-03-20 18:26:12 -05:00
Roman Moravčík
f3cf95a937
Update Slovak language. ( #13435 )
2019-03-20 16:37:34 -05:00
Scott Lahteine
144018736a
Use USES_Z_MIN_PROBE_ENDSTOP
2019-03-18 16:58:31 -05:00
InsanityAutomation
5b2c37d6c1
Followup to BLTouch ( #13422 )
2019-03-18 16:31:11 -05:00
InsanityAutomation
3fb8489ae3
EXTUI and UBL compilation fixes ( #13420 )
2019-03-17 07:57:54 -05:00
Scott Lahteine
b376c7e374
Group DISABLED items
2019-03-17 07:56:35 -05:00
Scott Lahteine
58bca67883
Unify status scrolling further
2019-03-17 07:56:35 -05:00
Scott Lahteine
c4443f885e
finishstatus => finish_status
2019-03-17 07:56:35 -05:00
InsanityAutomation
691e5c3bb8
BLTouch V3.0 support ( #13406 )
2019-03-17 05:57:25 -05:00
Scott Lahteine
49cf92dc36
Extended condition macros ( #13419 )
...
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
2019-03-16 23:43:06 -05:00
Tobias Frost
d20eab4f83
Fix macro in set_color() ( #13417 )
2019-03-16 19:05:59 -05:00
Ludy
59353546e8
Fix BUTTON_EXISTS and misplaced comma ( #13411 )
...
Fixes #13410 and redeclaration of `BUTTON_EXISTS`
2019-03-16 11:59:12 -05:00
InsanityAutomation
09eb30dc05
IDEX Mirror mode based on Formbot / Vivedino Symmetric mode ( #13404 )
2019-03-15 22:46:27 -05:00
Scott Lahteine
5c1aa5162d
Adjust M206 output in M503 for DELTA
2019-03-15 19:20:40 -05:00
Scott Lahteine
ad8b82d054
Fix KILL_PIN assignment for MKS_MINI_12864
...
According to #13397
2019-03-15 19:20:40 -05:00
Scott Lahteine
3a916b4ef2
Create bresenham.h
2019-03-15 19:20:39 -05:00
Karl Andersson
5d3928cb01
PWM is not defined on Arduino Core STM32 ( #13405 )
2019-03-15 19:14:06 -05:00
Scott Lahteine
9a515cbd32
Fix Pause Print message and behavior ( #13394 )
2019-03-14 02:26:07 -05:00
Scott Lahteine
f5bcc00570
Unify debugging output with debug_out.h ( #13388 )
2019-03-14 02:25:42 -05:00
Andrei Pozolotin
cc8a871705
Add capability string CHAMBER_TEMPERATURE ( #13391 )
...
Reference: #13380
2019-03-13 18:09:22 -05:00
Scott Lahteine
67bee06e43
No patch needed for non-libmaple analogWrite
...
See https://github.com/pinchies/Marlin/pull/1#issuecomment-471388743
2019-03-13 07:21:10 -05:00
Scott Lahteine
f89b375fb9
Fixes and improvements for PWM pins ( #13383 )
2019-03-13 06:51:15 -05:00
Scott Lahteine
87162658c4
Fix and improve software endstops ( #13386 )
2019-03-13 05:48:36 -05:00
Scott Lahteine
6214c997c0
Remove includes of <binary.h>
2019-03-13 05:32:33 -05:00
Scott Lahteine
4555ae448f
Fixups for ESP32
2019-03-13 05:32:33 -05:00
Scott Lahteine
a5ea3e2f15
Fix hotend offset on switching toolhead change
...
See commentary at #11623
2019-03-13 05:32:21 -05:00
jmz52
8e0ac93d60
Fix 'UNUSED redefined' compiler warning ( #13387 )
2019-03-13 04:34:02 -05:00
Hadrien Jouet
0278ad0a6d
Add ESP32 WiFi interface ( #11209 )
2019-03-13 00:48:08 -05:00
InsanityAutomation
c03df89921
ExtUI Mesh Leveling Extensions ( #13363 )
2019-03-13 00:45:52 -05:00
InsanityAutomation
050eac03af
Single X Duplication Extension ( #13373 )
...
* Multi-nozzle selective duplication
* Use a bit-mask, reduce stepper_indirection.h size
* Tweak the multi-nozzle duplication description
* Use 'S' as a bool in M605
* Add HAS_DUPLICATION_MODE conditional
* Remove '_MODE' from the option name
* M605 in the style of Stacker M280
* Also include direct mask style (P)
2019-03-13 00:42:50 -05:00
Scott Lahteine
ad91476d26
Fix USEABLE_HARDWARE_PWM
2019-03-13 00:12:46 -05:00
Scott Lahteine
d63da4592d
Tweak to SCARA_move_to_cal
2019-03-12 22:06:50 -05:00
Scott Lahteine
51ff5b68fa
Clean up fastIO ahead of PWM patch
2019-03-12 20:39:55 -05:00
Scott Lahteine
388babbcea
Tweak SERIAL_PRINTF
2019-03-11 20:58:27 -05:00
Scott Lahteine
d94e077901
Apply HAS_HOTEND_OFFSET where needed
2019-03-11 20:58:27 -05:00
Scott Lahteine
11d6a939df
Always define axis_unhomed_err
2019-03-11 20:58:27 -05:00
7eggert
10c8c034bd
Allow both encoder and ADC keypad ( #13355 )
2019-03-11 18:10:56 -05:00
Andrei Pozolotin
31ff7da7ac
Add missing CHAMBER options (for M141) ( #13371 )
2019-03-11 16:50:07 -05:00
Scott Lahteine
0375e92847
Followup to serial rework
...
As mentioned in #13370
2019-03-11 16:46:04 -05:00
jmz52
013bb469ca
Fix compilation for STM32F1 with no SDIO ( #13366 )
2019-03-11 16:40:51 -05:00
Scott Lahteine
e52bcc9408
Limit top bed temp to BED_MAXTEMP - 10
...
The chances of a 10° overshoot is pretty minimal.
2019-03-11 16:32:34 -05:00
Scott Lahteine
98b55421a5
Clean up some temp config
2019-03-11 16:31:23 -05:00
InsanityAutomation
785a7028bf
Followup to 'volatile' patch ( #13369 )
...
Originally #13344
2019-03-11 15:01:57 -05:00
Scott Lahteine
aa1d587128
Some LCD code cleanup
2019-03-11 05:07:31 -05:00
Scott Lahteine
fa11427ec6
Remove obsolete LCD_CONTRAST
2019-03-11 03:33:07 -05:00
pinchies
4df9509ead
Add support for printers with inverted fan pins ( #13362 )
...
Add support for printers with inverted fan pins by adding `#define FAN_INVERTING 1` to `Configuration_adv.h` and modifying the fan write macros.
2019-03-10 20:51:21 -05:00
Scott Lahteine
1f7e220387
Make HAL ISR macros function-like
2019-03-10 20:44:27 -05:00
Scott Lahteine
e3ce346f24
Report position to host in Nozzle::park
2019-03-10 19:09:28 -05:00
Scott Lahteine
77b4176152
Use lib include for bit_constants.h
2019-03-10 19:09:28 -05:00
Scott Lahteine
3419099f0a
Clean up whitespace
2019-03-10 19:09:28 -05:00
pinchies
4c43e6c48b
Fix "spontaneous heating" issue (WRITE bug) on STM32 ( #13356 )
...
Should fix "spontanous heating" problems due to order of operations error. Error occurs at least with ststm32 v5.1.0 in PlatformIO.
2019-03-10 17:25:54 -05:00
Michiel Baird
b824a517aa
Add G38.4 and G38.5 ( #13348 )
2019-03-10 17:22:09 -05:00
Bruce j Beare
e4d080e63c
Reset after kill with a button on the KILL_PIN ( #13091 )
2019-03-10 09:57:38 -05:00
MoellerDi
c36989c39e
Fix chamber temperature measurement ( #13350 )
2019-03-10 09:51:13 -05:00
Scott Lahteine
12503fce06
Followup to wait_for_user fix
2019-03-10 09:14:02 -05:00
Scott Lahteine
33a08fc6f7
Fix typos from temperature rework
...
Followup to #12201
2019-03-10 08:28:16 -05:00
Tobias Frost
2efbcc90c5
Fix wait_for_user compile error ( #13352 )
2019-03-10 08:07:41 -05:00
Tobias Frost
60e82e3929
Send notifications to ExtUI for M0/M1 ( #13344 )
...
- Send notifications to ExtUI for M0/M1
- wait_for_user can be non-volatile (not changed by interrupt)
C / C++ compilers don't optimize away reads of non-volatile variables when a function call is used between accesses, because *any* variable could be changed by the function call. Since `wait_for_user` can't be changed without a function call, it should be non-volatile so the compiler can optimize away cases where it is read more than once without an intervening function call.
2019-03-09 14:20:37 -06:00
Marcio Teixeira
00fc43144a
Follow up fixes to various PRs. ( #13334 )
...
- Ensure `MarlinUI:get_progress` is defined for `ExtUI`.
- Fix for `BACKLASH_SMOOTHING` with small segments.
`BACKLASH_SMOOTHING` with extremely small segments failed to fully correct due to the correction factor being rounded down. Rounding up ensures the entire backlash will converge to zero even for small segments.
- Add pinout for the beta revision `EINSY_RETRO`.
- Update soft endstops with tool offsets (for toolchange et. al. move clamping) (#12568 )
2019-03-09 14:20:37 -06:00
Scott Lahteine
c7d618b4d9
Fix SERIAL_ECHOLNPAIR
...
Fix #13333
2019-03-09 14:20:37 -06:00
InsanityAutomation
d54741eda8
Update some G26 plausible values. Add speed control. ( #13330 )
2019-03-08 03:13:44 -06:00
Msq001
fb3302feda
Fix STM32F1 Serial and ADC pins ( #13331 )
2019-03-08 02:21:32 -06:00
Reece Kibble
dbead66988
Allows user to set (almost) any PWM frequency ( #12638 )
2019-03-08 02:15:42 -06:00
Tobias Frost
afbec5ff7e
Have ExtUI::getProgress use ui.get_progress ( #13328 )
2019-03-07 18:00:38 -06:00
3dlabsio
645ca7af7a
M141 Heated Chamber, Temperature rework ( #12201 )
2019-03-07 02:09:39 -06:00
Scott Lahteine
44571775bd
Further support for 6 extruders
2019-03-07 01:00:56 -06:00
Scott Lahteine
893ee68b52
Clean up trailing whitespace
2019-03-06 01:02:43 -06:00
Scott Lahteine
39f1222060
One fewer G29 error string
2019-03-05 23:04:52 -06:00
Scott Lahteine
cfdb38eda4
Allow SERIAL_ECHOPAIR to take up to 12 pairs ( #13311 )
2019-03-05 06:46:19 -06:00
Scott Lahteine
4771e372a1
Update criteria for PAUSE/RESUME/STOP menu items ( #13294 )
2019-03-05 06:46:06 -06:00
Tobias Frost
56fdcf93d1
Disallow SD_DETECT_INVERTED with FYSETC F6. ( #13307 )
2019-03-05 06:45:28 -06:00
Tobias Frost
7ce13a6ec1
Fix a print_job_timer compile error ( #13304 )
2019-03-05 06:39:15 -06:00
Tobias Frost
6df51201ae
Include EXTENSIBLE_UI in single LCD sanity check ( #13306 )
2019-03-05 06:33:36 -06:00
Scott Lahteine
2e5a3b01fd
Save Power Loss Recovery only on move commands
2019-03-05 02:43:29 -06:00
Scott Lahteine
15738ea506
Update a motion comment
2019-03-05 00:50:29 -06:00
Scott Lahteine
bc87e97357
Prevent a tool change move out of bounds
2019-03-05 00:50:29 -06:00
Scott Lahteine
2212da453a
Distinguish between analog/digital auto fans ( #13298 )
2019-03-05 00:41:31 -06:00
Chris Pepper
2513f6b550
Fix multiport G28 with Binary Transfer ( #13308 )
2019-03-04 16:44:54 +00:00
Chris Pepper
38bef9da91
Report auto temp to both serial ports, if available ( #13301 )
2019-03-03 21:03:48 -06:00
Robert Mendon
367d392880
Init stepper current after stepper pins are set up ( #13302 )
2019-03-03 20:58:02 -06:00
InsanityAutomation
bf8b38e0f7
Relocate configs above Marlin/src folder ( #13299 )
2019-03-03 16:50:56 -06:00
Scott Lahteine
d71dc5cf42
Fix for Ender 4 fan/case light pin
...
See #12731
2019-03-03 07:43:27 -06:00
Anthony Rich
7640b328df
Support for Tronxy X5S 2e ( #13297 )
2019-03-03 07:41:05 -06:00
Scott Lahteine
599cdc3f0f
Remove dead code from get_pid_output
...
See #12981
2019-03-03 05:45:20 -06:00
Scott Lahteine
35ae5daf2d
Split up sdcard G-codes
2019-03-03 01:52:15 -06:00
Scott Lahteine
3f36a38512
Clean up some pre-serial-redirect includes
2019-03-03 01:52:15 -06:00
Scott Lahteine
fa0d909dd3
Add FIL_RUNOUT_PIN for BIGTREE_SKR_V1.3
...
See #13267
2019-03-03 00:27:47 -06:00
Ludy
bd4160dbaf
Unused CS_ACTUAL_sb ( #13282 )
2019-03-02 17:30:30 -06:00
Vasily Evseenko
71773b128d
Fix stepper use before init. Add Ultimaker2+ Extended clone config ( #13284 )
2019-03-02 17:29:02 -06:00
Scott Lahteine
edc4e037c4
Add a note to G10
2019-03-02 17:19:36 -06:00
Tobias Frost
57afd0ab37
Fix range check bug in FileList::seek() ( #13286 )
...
When `count()` returns 0, `pos > (count()-1)` will always yield `true` due to integer underflow.
2019-03-02 16:43:08 -06:00
kAdonis
05c2f80826
Fix bug in wait-for-heatup ( #13290 )
2019-03-02 16:29:10 -06:00
Chris Pepper
b0553d2d97
Add M997 support and simple implementation for LPC176x ( #13281 )
2019-03-01 20:11:50 -06:00
Scott Lahteine
fa236e9718
General cleanup ahead of L64XX
2019-03-01 19:58:07 -06:00
Scott Lahteine
2f1e1dcb42
Gradual step towards EXTRUDERS 0 support
2019-03-01 01:51:24 -06:00
Scott Lahteine
99d0022fae
Drop the Z_MIN_PROBE_ENDSTOP option ( #13276 )
2019-03-01 00:27:45 -06:00
Scott Lahteine
9a6b90f47d
TMC2660.h comment tweaks
2019-03-01 00:25:22 -06:00
Scott Lahteine
a2e3226597
Init XYZ to configured home position
2019-02-28 22:10:26 -06:00
Scott Lahteine
4fbbce9a35
Marlin Dev Mode for DOGM status screen
2019-02-28 22:10:26 -06:00
Scott Lahteine
998ce55be0
Alternative fan bitmap
2019-02-28 22:08:20 -06:00
InsanityAutomation
e2e2a55d9b
Add thermistor type 67 SliceEng ( #13275 )
2019-02-28 19:44:17 -06:00
Msq001
5b7ad3a5a0
Fix SKR onboard TF card CS pin ( #13272 )
2019-02-28 19:41:19 -06:00
Scott Lahteine
7fde3ed915
Skip hysteresis check when temp is already close to target
...
To eliminate a long delay during pause, park, and filament change
2019-02-28 14:35:19 -06:00
Chris Pepper
7de6476b3d
Fix binary protocol error
2019-02-28 02:31:42 +00:00
Scott Lahteine
2c10222e87
card.transfer_port => transfer_port_index
2019-02-27 20:14:17 -06:00
Chris Pepper
4ab433d391
Fix binary protocol with one serial port ( #13270 )
...
- The `sdcard.transfer_port` variable is Marlin's internal serial port index, not the physical serial port number.
- Added packet number to "ok" response so hosts don't need to wait for the ACK.
- Renamed feature to `BINARY_FILE_TRANSFER`, as the speed up is only consequential to the ability to transfer binaries over serial.
2019-02-27 19:57:48 -06:00
InsanityAutomation
eb4bf93ea4
Add more Babystep options ( #13262 )
2019-02-27 04:38:56 -06:00
Scott Lahteine
f37df28d17
UBL G29 T current position fix
...
Counterpart to #12845
2019-02-26 22:25:53 -06:00
Msq001
f8a39919fa
Add Bigtree SKR 1.3 board ( #13267 )
...
Co-Authored-By: Msq001 <msq001@users.noreply.github.com>
2019-02-26 21:30:00 -06:00
Bob Kuhn
ddbe4cfa20
Printrboard G2 support ( #13116 )
2019-02-26 21:03:13 -06:00
Scott Lahteine
4200f9ed62
Hide freeMemory et.al. warnings
2019-02-26 18:03:00 -06:00
Scott Lahteine
dc88747770
Fix Due GET_ARRAY_IS_DIGITAL
...
Co-Authored-By: bob-the-kuhn <bob.kuhn@att.net>
2019-02-26 17:49:14 -06:00
Scott Lahteine
a79b9bbe6b
Cleanup whitespace, add a const
2019-02-26 17:49:14 -06:00
Giuliano Zaro
2616e4d4d9
Remove duplicated 'chitchat' defines ( #13258 )
2019-02-25 16:13:01 -06:00