Scott Lahteine
27b80b1dd1
Merge pull request #4667 from thinkyhead/rc_M211_sw_endstop_switch
...
M211: Enable/Disable Software Endstops
2016-08-21 06:44:00 -05:00
Scott Lahteine
14a03727e1
Tweak serialprintPGM
2016-08-21 00:10:09 -05:00
Scott Lahteine
2f223b8c79
Use ABC and XYZ for "3"
2016-08-21 00:10:08 -05:00
Scott Lahteine
4cd1ad8f28
Adjustments to M209, G28, M605
2016-08-21 00:10:08 -05:00
Scott Lahteine
e354cf5884
Apply sw_endstops_enabled to manual move
2016-08-21 00:10:08 -05:00
Scott Lahteine
280534c06f
Add M211: Enable/Disable Software Endstops
2016-08-21 00:10:08 -05:00
Scott Lahteine
01d4703429
PREVENT_DANGEROUS_EXTRUDE => PREVENT_COLD_EXTRUSION
...
Also improve the documentation of this and related options, and set
EXTRUDE_MINTEMP to 170 everywhere.
2016-08-20 23:35:27 -05:00
Scott Lahteine
a1f6cf1e5d
Merge pull request #4665 from thinkyhead/rc_lcd_not_ultipanel
...
Clean up ultralcd code, dependencies on ULTIPANEL
2016-08-20 22:43:17 -05:00
Scott Lahteine
1a255afa36
Merge pull request #4666 from thinkyhead/rc_dropsegments_adj
...
dropsegments => MIN_SEGMENTS_FOR_MOVE
2016-08-20 22:42:16 -05:00
Scott Lahteine
374f8d2014
dropsegments => MIN_SEGMENTS_FOR_MOVE
2016-08-20 18:52:15 -05:00
Scott Lahteine
76c3f326ff
Clean up DOGM code, comments
2016-08-20 18:33:12 -05:00
Scott Lahteine
71319adbb8
Wrap ULTIPANEL-dependent code
2016-08-20 18:33:11 -05:00
Scott Lahteine
305913545e
Move number-to-string function to utility.*
2016-08-20 18:33:11 -05:00
Scott Lahteine
394c80c87b
Merge pull request #4655 from thinkyhead/rc_serial_static
...
Optimize, reduce size of MarlinSerial
2016-08-20 15:51:57 -05:00
MagoKimbra
28d1e5a946
Fix_Zig_Zag
2016-08-20 11:28:08 +02:00
Scott Lahteine
14395a1a96
Optimize, reduce size of MarlinSerial
2016-08-19 16:53:20 -05:00
Scott Lahteine
4d4c00d69c
Merge pull request #4651 from thinkyhead/rc_homing_vs_leveling_z
...
Improvements to homing / leveling
2016-08-19 15:45:49 -05:00
Brian Gortney
8fae3e1f9f
Add Rambo support/env to platformio.ini; properly maps extended pins
2016-08-19 07:11:23 -04:00
Scott Lahteine
12d72363cb
Do Delta radius check without sqrt
2016-08-19 05:05:48 -05:00
Scott Lahteine
044f800be9
Use SERIAL_PROTOCOLLNPGM in G28
2016-08-19 04:45:33 -05:00
Scott Lahteine
d309a9647d
Include probe offset for moving "close to the bed"
2016-08-19 04:45:33 -05:00
Scott Lahteine
35a08eeaeb
Use Z_HOME_DIR over axis_home_dir where we can
2016-08-19 04:45:32 -05:00
Scott Lahteine
99b22d5785
Default AUTO_BED_LEVELING_GRID_POINTS to 3
2016-08-19 04:45:32 -05:00
Scott Lahteine
9b1f3f7d12
Sanity-check DELTA + AUTO_BED_LEVELING_GRID_POINTS
2016-08-19 04:45:32 -05:00
Scott Lahteine
733453569b
Merge pull request #4650 from thinkyhead/rc_percent_is_percent
...
extruder_multiplier => flow_percentage
2016-08-19 04:38:18 -05:00
Scott Lahteine
55355a4fb8
Make probed points more symmetrical
2016-08-19 04:32:03 -05:00
Scott Lahteine
1f776f6034
Tweak some code comments
2016-08-19 04:32:02 -05:00
Scott Lahteine
748228cf40
Use named indices for delta_grid_spacing
2016-08-19 04:32:02 -05:00
Scott Lahteine
ead333e7da
line_to_axis_pos => do_homing_move
2016-08-19 04:32:02 -05:00
Scott Lahteine
7a4ccd7967
Add do_probe_move with Z fixes
2016-08-19 04:32:02 -05:00
Scott Lahteine
a1bad589c9
Augment debug/homing logging
2016-08-19 04:32:02 -05:00
Scott Lahteine
41b5c48129
Update software endstops if EEPROM is loaded
2016-08-19 04:32:01 -05:00
Scott Lahteine
628dcbc764
extruder_multiplier => flow_percentage
2016-08-18 22:13:47 -05:00
Jason Westervelt
d222ee4de2
Update language_ru.h
...
Updated missing translations. Caught up on change to MSG_HOME.
2016-08-17 13:55:44 -07:00
Scott Lahteine
d63b8e2b2b
Additional details for I2C_SLAVE_ADDRESS
2016-08-15 19:27:53 -07:00
Scott Lahteine
7427290d3a
Merge pull request #4634 from thinkyhead/rc_lang_disp_char
...
Set language display charset in language.h
2016-08-15 19:25:56 -07:00
Scott Lahteine
aa30550b21
Keep SIMULATE_ROMFONT only language.h
2016-08-15 19:11:31 -07:00
Scott Lahteine
cec61c350d
Set language display charset in language.h
2016-08-15 19:01:12 -07:00
Scott Lahteine
165d7abb1b
Merge pull request #4625 from thinkyhead/rc_i2c_request_capture_flush
...
Add request, capture, flush to TWIBus
2016-08-15 18:15:43 -07:00
RicardoGA
507784b846
Fix Messages length
2016-08-15 10:30:51 -05:00
Scott Lahteine
bd928a69ec
Add request, capture, flush to TWIBus
2016-08-15 00:04:20 -07:00
RicardoGA
7b7f319ed5
Update Spanish Lenguage
...
Adds missing messages
2016-08-14 23:30:43 -05:00
Scott Lahteine
132322e4d9
Fix #4614 : currentScreen only defined with ULTIPANEL
2016-08-14 00:29:46 -07:00
Scott Lahteine
dcd26b0403
Merge pull request #4621 from thinkyhead/rc_fan_set_output
...
Init PWM-able AUTO_FAN pins with SET_OUTPUT
2016-08-13 21:22:27 -07:00
Scott Lahteine
79ba983782
Allow reply() to use const string with no warning
2016-08-13 21:05:44 -07:00
Scott Lahteine
3a0a94b21a
Always init configured fan pins
2016-08-13 20:38:40 -07:00
Scott Lahteine
c63003ed3e
Use matching auto-fan flags
2016-08-13 20:38:40 -07:00
Scott Lahteine
3475fd7b0f
Init PWM-able auto fan pins with SET_OUTPUT
2016-08-13 20:38:40 -07:00
Scott Lahteine
abf9696db1
Loop fan-pins based on array size
2016-08-13 20:05:32 -07:00
Scott Lahteine
e88575c8ec
Init next_auto_fan_check_ms to zero
2016-08-13 20:05:32 -07:00
Scott Lahteine
7272ec5608
Update HAS_FAN flags for 4 auto fans
2016-08-13 20:05:32 -07:00
Scott Lahteine
7b21811a9a
Flags for matching auto-fans
2016-08-13 20:05:32 -07:00
Scott Lahteine
97e0aed304
Further refinements of TWIBus
2016-08-13 18:32:41 -07:00
Scott Lahteine
38fa1b1939
Merge pull request #4196 from cimbalo/Platformio_support
...
Add working PlatformIO support
2016-08-12 17:32:09 -07:00
Scott Lahteine
d7edc039af
Merge pull request #4605 from thinkyhead/rc_3drag_fan_is_8
...
Fixup 3DRAG pins based on updated RAMPS pins
2016-08-12 17:30:27 -07:00
Silvio
923388e0c7
Fix acceleration and feedrate following bq/Marlin
2016-08-12 15:42:20 +02:00
Scott Lahteine
405afec393
Include decimeters in filamentUsed display
2016-08-12 05:16:43 -07:00
Scott Lahteine
fef0e8ba86
Merge pull request #4610 from thinkyhead/rc_sd_pause_and_stop
...
Fix stopSDPrint so it works when paused
2016-08-12 04:09:22 -07:00
Scott Lahteine
192ac2dfd7
Squish some CardReader code
2016-08-12 03:32:42 -07:00
Scott Lahteine
61932b859e
Fix bug in CardReader::stopSDPrint
...
If the SD print is paused, it cannot be stopped
2016-08-12 03:21:10 -07:00
Scott Lahteine
9e5d5a3b7c
Merge pull request #4597 from tnw513/italian_fix
...
Added hyphenated strings for full graphic display
2016-08-12 02:37:53 -07:00
Silvio Didonna
f999292eea
added hyphenated letters for full graphic display and fixed some strings
2016-08-12 08:57:22 +02:00
Scott Lahteine
67f119d18b
Add an i2c request handler
2016-08-11 18:09:18 -07:00
Scott Lahteine
2d3db5b5bd
Fixup pins_3DRAG based on updated RAMPS pins
2016-08-11 15:49:47 -07:00
Scott Lahteine
d29a64d4b3
Merge pull request #4603 from thinkyhead/rc_less_MSG_MOVE
...
Strip never-translated strings from language files
2016-08-11 14:21:58 -07:00
Scott Lahteine
d6a7ca6553
Merge pull request #4584 from thinkyhead/rc_delta_cal_more
...
Use configured feedrates, center in DELTA_CALIBRATION_MENU
2016-08-11 14:04:05 -07:00
Scott Lahteine
d3b432adca
Strip never-translated strings from language files
2016-08-11 13:41:07 -07:00
Scott Lahteine
1a558ef486
Tweak MarlinSerial precursor
2016-08-11 12:47:06 -07:00
Scott Lahteine
802818f7ab
Cleanup SdFatUtil.h
2016-08-11 12:47:06 -07:00
Scott Lahteine
52560e257f
Merge pull request #4595 from thinkyhead/rc_i2c_slave
...
Add support for i2c slave address
2016-08-11 12:39:26 -07:00
Scott Lahteine
432e9a1f50
Use configured feedrates, center for DELTA_CALIBRATION_MENU
2016-08-11 12:05:55 -07:00
Scott Lahteine
cd496dd9bd
do_blocking_move_to can't be 'inline', takes const ref args
2016-08-11 12:05:55 -07:00
Scott Lahteine
dd75fca4d9
Make M155 / M156 a bit more flexible
2016-08-11 00:52:01 -07:00
Scott Lahteine
a99ecf71d8
Add support for i2c slave address
2016-08-10 23:30:35 -07:00
Scott Lahteine
b63d70b186
Fix serial output for MBL, M303
2016-08-10 18:49:52 -07:00
Scott Lahteine
a36a168af2
Use the truly configured middle on Delta
2016-08-10 00:03:22 -07:00
Scott Lahteine
58c8e6cef2
Fixes #4576 : Convert filamentUsed to long for display
2016-08-09 23:57:28 -07:00
Scott Lahteine
01f1f779a5
Followup to #4574 , specify L for long
2016-08-09 23:43:37 -07:00
Kaibob2
1c7bd17e60
Update language_de.h with MSG_MOVE_E1 - E4
...
MSG_MOVE_E1 was missing
MSG_MOVE_E2 was missing
MSG_MOVE_E3 was missing
MSG_MOVE_E4 was missing
I assigned "0" to "MSG_MOVE_E1", "1" to "MSG_MOVE_E2" and so on, as this is what i assume to be the standard naming for the first (E0) and second (E1) extruder. This would have to be changed inthe other languages too :(
2016-08-09 20:49:26 +02:00
Scott Lahteine
880cdb553b
Include days in Graphical LCD print timer
2016-08-08 23:21:36 -07:00
Scott Lahteine
f4ac8c15e3
Merge pull request #4573 from thinkyhead/rc_mintemp_bed_later
...
Throw MINTEMP BED error only if heating
2016-08-08 23:02:42 -07:00
Scott Lahteine
b7b5b50a84
Throw bed min temp error only if heating
2016-08-08 22:49:22 -07:00
Scott Lahteine
d3ba878f70
Drop intermediate float in HEATER_0_USES_MAX6675 test
2016-08-08 22:49:22 -07:00
Scott Lahteine
3e8f9ecd1c
Extend min/max_temp_error for the bed
2016-08-08 22:49:21 -07:00
Scott Lahteine
1f15f0df5f
Merge pull request #4572 from thinkyhead/rc_digital_clock_100h
...
Show up to 99:59 in digital time
2016-08-08 22:28:29 -07:00
Scott Lahteine
8100a4dace
Fix a compile error in EMERGENCY_PARSER sanity check
2016-08-08 21:49:57 -07:00
Scott Lahteine
45f67164b6
Simplify the delay in kill()
2016-08-08 21:49:34 -07:00
Scott Lahteine
30b1c731b5
Show up to 99:59 in digital time
2016-08-08 21:26:34 -07:00
Scott Lahteine
3be4511230
Patch command order in delta calibration menu
2016-08-08 21:15:25 -07:00
Scott Lahteine
9afa060ed6
Merge pull request #4570 from thinkyhead/rc_proper_delta_calibration
...
Make DELTA_CALIBRATION_MENU more universal
2016-08-08 21:11:40 -07:00
Scott Lahteine
46c8862635
Merge pull request #4564 from AnHardt/max-spi-setup
...
MISO is an input
2016-08-08 21:01:15 -07:00
Scott Lahteine
88540d8ecf
Fix: LCD displays SD status at startup
2016-08-08 20:53:18 -07:00
Scott Lahteine
b16ea09498
Make DELTA_CALIBRATION_MENU more universal
2016-08-08 20:42:58 -07:00
Scott Lahteine
3a56836ead
Always disable SLOWDOWN for DELTA/SCARA
2016-08-08 18:06:46 -07:00
AnHardt
aa9b52b2e7
MISO is an input
2016-08-08 20:09:57 +02:00
Scott Lahteine
67c4acf750
Merge pull request #4562 from thinkyhead/rc_fix_z_dual_endstops
...
Fix Z_DUAL_ENDSTOPS with Z MIN Homing
2016-08-07 19:23:09 -07:00
Scott Lahteine
e113740fa3
Specify that Z_PROBE_*_HEIGHT is nozzle-relative
2016-08-07 17:54:17 -07:00
Scott Lahteine
462e189edd
Move pullups after Z_DUAL_ENDSTOPS block
2016-08-07 17:43:02 -07:00
Scott Lahteine
367dad5902
Sanity check Z_DUAL_ENDSTOPS with DELTA
2016-08-07 17:08:41 -07:00
Scott Lahteine
5fca110e0d
Fix Z_DUAL_ENDSTOPS with MIN homing
2016-08-07 17:08:41 -07:00
Scott Lahteine
fc11f05c11
Merge pull request #4556 from thinkyhead/rc_all_feedrates_mm_s
...
Within Marlin, maintain most feed rates in mm/s
2016-08-07 16:14:16 -07:00
Scott Lahteine
7b2abe6fc8
Use steps_to_mm in extruder runout prevent
2016-08-07 00:28:52 -07:00
Scott Lahteine
d320065320
Within Marlin, maintain most feed rates in mm/s
2016-08-07 00:28:52 -07:00
Scott Lahteine
ed0b50ebee
Merge pull request #4555 from thinkyhead/rc_mbl_index_rounding
...
Remove premature int-cast from MBL cell index methods
2016-08-06 23:34:01 -07:00
Scott Lahteine
bad286d52f
Save CPU by multiplying by pre-compiled values
2016-08-06 23:24:07 -07:00
Scott Lahteine
dce6026e0e
Remove premature cast to int
2016-08-06 23:01:29 -07:00
Scott Lahteine
cffe77c537
Merge pull request #4553 from thinkyhead/rc_lcd_chars_save_ram
...
Save bytes for custom chars (Hitachi LCD)
2016-08-06 18:29:16 -07:00
Scott Lahteine
42927530fe
Explicitly clear the screen in lcd_goto_screen
2016-08-06 18:10:39 -07:00
Scott Lahteine
a6d2c2479f
Minor cleanup of lcd_goto_screen calls
2016-08-06 18:10:39 -07:00
Scott Lahteine
e47c8b9829
Save bytes for custom chars (Hitachi LCD)
2016-08-06 18:10:39 -07:00
Scott Lahteine
0ff5005c9b
Allow connector flexibility for BQ ZUM Mega
2016-08-06 17:19:12 -07:00
Scott Lahteine
98437bd488
Allow override of CONTROLLERFAN_PIN with RAMPS EFF
2016-08-06 17:19:12 -07:00
Scott Lahteine
93eafa1785
Use DISABLED to check TEENSY pin option
2016-08-06 17:19:12 -07:00
AnHardt
98392abb78
Clean warnings for pins_BQ_ZUM_MEGA_3D.h
2016-08-06 17:19:12 -07:00
AnHardt
98e96feee9
Repair SPI-pins
...
SCK_PIN can't be defined as DIO[number] they mus be defined as pure number.
So rebuilding the structure of fastio.h in pins.h.
2016-08-06 17:19:11 -07:00
Scott Lahteine
a00783c41f
Format probe stowed test code
2016-08-06 14:31:07 -07:00
AnHardt
f37e8a31d7
Make Allen Key Probe stow
...
by switching off the tests for the probe before the stow move.
2016-08-06 14:30:38 -07:00
Scott Lahteine
5347f39fce
Merge pull request #4542 from AnHardt/rep-de
...
Repair-language.de
2016-08-05 23:50:35 -07:00
Scott Lahteine
5ef4a5577c
Merge pull request #4537 from thinkyhead/rc_fix_some_flaws
...
Patch up some flaws here and there
2016-08-05 23:49:57 -07:00
AnHardt
0d3b67a580
Repair-language.de
2016-08-06 01:00:40 +02:00
Scott Lahteine
938e6d15c4
Patch up some flaws, here and there
2016-08-05 08:17:37 -07:00
Scott Lahteine
3a3984e67a
Merge pull request #4535 from thinkyhead/rc_old_symbols_first
...
Move tests for old symbols to the top of sanity check
2016-08-04 21:24:02 -07:00
Scott Lahteine
d7b882e430
Move tests for old symbols to the top of sanity check
2016-08-04 21:03:55 -07:00
Scott Lahteine
479107d04f
Merge pull request #4530 from Kaibob2/patch-1
...
Added / Update language_de.h
2016-08-04 16:58:50 -07:00
Kaibob2
1abd7fa670
Update language_de.h
...
Added german translation for MSG_INFO_PRINT_LONGEST and MSG_INFO_PRINT_FILAMENT.
MSG_HEATING_COMPLETE changed from "Aufgeheizt" to "Extr. aufgeheizt"
MSG_HEATING changed from "Aufheizen" to "Extr. aufheizen"
2016-08-04 09:40:38 +02:00
Scott Lahteine
7e2bd9a233
Z_RAISE_PROBE_* => Z_PROBE_*_HEIGHT
2016-08-03 21:18:38 -07:00
Scott Lahteine
445458c221
Don't include zprobe_zoffset in do_probe_raise
2016-08-03 21:12:02 -07:00
Rafa Couto
0114676953
Update of Galician language 2016-08-03
2016-08-03 15:00:18 +02:00
Scott Lahteine
bd7a96ed42
Merge pull request #4517 from thinkyhead/rc_min_probe_pin
...
Define Z_MIN_PROBE_PIN always, allowing override
2016-08-02 21:35:59 -07:00
Scott Lahteine
704ae1b737
Merge pull request #4516 from thinkyhead/rc_short_prints_quiet
...
Only report finished prints longer than 1 min
2016-08-02 21:14:30 -07:00
Scott Lahteine
7ed70305df
Merge pull request #4515 from thinkyhead/rc_fix_speaker_tone
...
Prevent the 'tone(f,d)' function from being interrupted
2016-08-02 21:13:47 -07:00
Scott Lahteine
f1be87a85c
Move probe pin sanity checks out of ABL block
2016-08-02 20:55:17 -07:00
Scott Lahteine
9cb596e88c
Define Z_MIN_PROBE_PIN always, allowing override
2016-08-02 20:31:44 -07:00
Scott Lahteine
229f70f194
Only report finished prints longer than 1 min
2016-08-02 19:58:12 -07:00
Scott Lahteine
e040e00ae9
Merge pull request #4514 from thinkyhead/rc_cleanup_circularqueue
...
Patch up CircularQueue
2016-08-02 19:42:38 -07:00
Scott Lahteine
6110d57c16
Prevent the 'tone(f,d)' function from being interrupted
2016-08-02 19:37:47 -07:00
Scott Lahteine
b73203a0b7
Move some includes around to uncover missing deps
2016-08-02 19:37:46 -07:00
Scott Lahteine
f26d5425bf
Patch up CircularQueue
...
- Use `size` and `count` instead of `length` and `size`
- Fix bug: `peek` should return the item
- Clean up comments, spacing, spelling
2016-08-02 18:57:15 -07:00
Scott Lahteine
c9123adc59
Improved SCREEN / MENU macros
2016-08-02 18:05:34 -07:00
Scott Lahteine
cebeb48005
Merge pull request #4511 from thinkyhead/rc_encoder_flex
...
Allow encoder pulse/step override for more LCDs
2016-08-02 16:50:50 -07:00
Scott Lahteine
3cccaa9885
Allow encoder pulse/step override for more LCDs
2016-08-02 15:57:26 -07:00
Scott Lahteine
14c5a46ee9
Use multiplication for MMM_SCALED
2016-08-02 15:05:17 -07:00
Scott Lahteine
d8945e8464
Fix Z_HEAD index for COREYZ
2016-08-02 15:05:17 -07:00
Scott Lahteine
0f030aface
Merge pull request #4503 from AnHardt/fix-retract
...
Correct typo in retract()
2016-08-02 15:04:55 -07:00
Scott Lahteine
fbd8f06951
Merge pull request #4506 from thinkyhead/rc_buzzer_needs_beeper
...
Buzzer requires BEEPER_PIN
2016-08-02 14:40:43 -07:00
Scott Lahteine
330f82971b
Buzzer requires BEEPER_PIN
2016-08-02 14:05:37 -07:00
Scott Lahteine
e0d7b8bf27
Fix Azteeg X3 servo pin / Viki i2c
2016-08-02 14:05:37 -07:00
Scott Lahteine
7cceb15925
Merge pull request #4505 from thinkyhead/rc_auto_select_dplugs
...
Auto-select power plugs for RAMPS derivatives
2016-08-02 12:56:52 -07:00
Scott Lahteine
593b37519a
Boards with 4 power outputs are EFBF or EFBE
2016-08-02 12:34:28 -07:00
AnHardt
9ab94bd2c1
fix-babysrepping
2016-08-02 21:06:42 +02:00
AnHardt
39c4603598
Correct typo in retract.
2016-08-02 21:06:08 +02:00
Scott Lahteine
cebd2bfff0
Auto-select power plugs for RAMPS derivatives
2016-08-02 11:59:25 -07:00
Scott Lahteine
34c60f1b55
Merge pull request #4491 from thinkyhead/rc_fix_lcd_move_e
...
Use a default argument in _lcd_move_e
2016-08-01 16:45:25 -07:00
Scott Lahteine
38af251b91
Use a default argument in _lcd_move_e
2016-08-01 16:09:26 -07:00
Scott Lahteine
374ae6c099
Fix pins for RAMBO plus VIKI
2016-08-01 16:09:26 -07:00
Scott Lahteine
7594138740
Merge pull request #4493 from jbrazio/buildroot-cleanup
...
Move font folder
2016-08-01 15:57:23 -07:00
Scott Lahteine
6eed37aafb
Merge pull request #4486 from thinkyhead/rc_pid_add_extrusion_rate_off
...
PID_EXTRUSION_SCALING, disabled by default
2016-07-31 18:23:51 -07:00
Scott Lahteine
4bf3526d00
Merge pull request #4463 from thinkyhead/rc_azteeg_x3_eeb
...
Wrangle RAMPS variants and derivatives
2016-07-31 18:22:49 -07:00
Scott Lahteine
1993c45759
Merge pull request #4487 from thinkyhead/rc_refresh_pos_fix
...
Update refresh_positioning - no need for obj ref
2016-07-31 18:22:38 -07:00
Scott Lahteine
f83369b79c
Update refresh_positioning - no need for obj ref
2016-07-31 18:01:13 -07:00
Scott Lahteine
63fd1f49a6
PID_EXTRUSION_SCALING, disabled by default
2016-07-31 17:49:34 -07:00
Scott Lahteine
49997e2e22
HI_VOLT_PIN => "RAMPS_Dn_PIN"
2016-07-31 15:42:52 -07:00
AnHardt
60ad365e21
repair-software-spi
2016-07-31 15:50:42 +02:00
Scott Lahteine
f388beafa1
Merge pull request #4476 from otvald/RCBugFix
...
FIX for endstop adjustemt on delta is offset
2016-07-31 01:09:54 -07:00
Scott Lahteine
3633d4978b
Merge pull request #4475 from esenapaj/Fix-for-PR-#4452
...
Fix for PR #4452 (Additional heater-state output changes)
2016-07-31 01:08:27 -07:00
Thomas Otvald Jensen
fe059f1221
During homing, line_to_axis_pos will make a path which moves across the
...
endstop trigger point. The move is stopped at endstop, so current_position
should also be adjusted to reflect this!
Caused error in subsequent call in endstop adjustment, since the movement
would assume a wrong starting position.
2016-07-30 16:50:31 +02:00
esenapaj
bd73e6d3c8
Fix for PR #4452 (Additional heater-state output changes)
...
・Add missing ';'
2016-07-30 22:49:30 +09:00
esenapaj
cd5b03d88f
Update distribution date and readme
2016-07-30 21:27:29 +09:00
Scott Lahteine
f575e92f2e
Merge pull request #4473 from esenapaj/Follow-up-the-PR-#4408-etc
...
Follow-up the PR #4408 (Add support for reprapworld LCD), etc
2016-07-30 04:45:27 -07:00
esenapaj
657ef8aded
Follow-up the PR #4408 (Add support for reprapworld LCD), etc
...
・Put #define REPRAPWORLD_GRAPHICAL_LCD into all the example
configuration files
・Adjust spacing
2016-07-30 20:32:57 +09:00
Scott Lahteine
83d341c394
Make Conditionals.h a catch-all for old configs
2016-07-30 04:25:30 -07:00
Scott Lahteine
de951c64f1
Make pins for EFF a consistent order
2016-07-30 04:17:21 -07:00
Scott Lahteine
49f75b7891
pins_RAMPS_14.h => pins_RAMPS.h
2016-07-30 04:17:21 -07:00
Scott Lahteine
d3b713cebc
Set flags for RAMPS "type" in pins.h
2016-07-30 04:17:21 -07:00
Scott Lahteine
223b7e473f
RAMPS assignment for derivatives
2016-07-30 04:17:21 -07:00
Scott Lahteine
3865843283
Consolidate setting of RAMPS High Voltage PWM outputs
2016-07-30 04:17:21 -07:00
Scott Lahteine
bdac2eb13a
Don't set non-existent SLED_PIN
2016-07-30 04:17:21 -07:00
Scott Lahteine
bfbd01e29a
Merge pull request #4470 from thinkyhead/rc_fix_manual_move
...
Followup to #4468
2016-07-30 04:17:05 -07:00
Scott Lahteine
802d873fc1
Merge pull request #4469 from esenapaj/Fix-for-PR-#4453
...
Fix for PR #4453 (Improved MANUAL_[XYZ]_HOME_POS)
2016-07-30 04:08:54 -07:00
Scott Lahteine
8e2f095dde
Merge pull request #4456 from jbrazio/speaker-type3
...
Improvement to non-blocking speaker
2016-07-30 04:07:08 -07:00
Scott Lahteine
ad68b4cb8b
Followup to #4468
2016-07-30 03:49:42 -07:00
esenapaj
b8c112c490
Fix for PR #4453 (Improved MANUAL_[XYZ]_HOME_POS)
2016-07-30 19:37:43 +09:00
Scott Lahteine
2f76138645
Merge pull request #4468 from thinkyhead/rc_fix_manual_move
...
Specify manual-movable E axes by extruder type
2016-07-30 03:21:43 -07:00
Scott Lahteine
696b63e300
Specify manual-movable E axes by extruder type
2016-07-30 00:36:48 -07:00
Scott Lahteine
46c33f1cfa
Merge pull request #4467 from jbrazio/safe_delay-millis_t
...
Makes safe_delay() to be fully compatible with delay()
2016-07-29 20:23:44 -07:00
Scott Lahteine
9e21b2e51d
Merge pull request #4455 from AnHardt/double-bump-feature
...
double bump probing as a feature
2016-07-29 20:00:10 -07:00
Scott Lahteine
db4d03bc81
Merge pull request #4452 from thinkyhead/rc_fix_heaterstates_part_2
...
Additional heater-state output changes
2016-07-29 19:58:00 -07:00
Scott Lahteine
c68ca95345
Merge pull request #4464 from thinkyhead/rc_fix_steps_per_mm_handling
...
Account for DELTA in Planner::refresh_positioning
2016-07-29 19:34:59 -07:00
João Brázio
226e74a438
Fixes safe_delay() to be fully compatible with delay()
2016-07-30 02:56:26 +01:00
João Brázio
8e79e8cdb3
Adds types.h
2016-07-30 02:55:52 +01:00
Scott Lahteine
844a4e799e
Account for DELTA in Planner::refresh_positioning
2016-07-29 18:41:11 -07:00
AnHardt
7188ce0ad6
double bump probing as a feature
...
Why double touch probing is not a good thing.
It's widely believed we can get better __probing__ results when using a double touch when probing.
Let's compare to double touch __homing__.
Or better let's begin with single touch __homing__.
We home to find out out position, so our position is unknown.
To find the endstop we have to move into the direction of the endstop.
The maximum way we have to move is a bit longer than the axis length.
When we arrive at the endstop - when it triggers, the stepper pulses are stopped immediately.
It's a sudden stop. No smooth deacceleration is possible.
Depending on the speed and the moving mass we lose steps here.
Only if we approached slow enough (below jerk speed?) we will not lose steps.
Moving a complete axis length, that slow, takes for ever.
To speed up homing, we now make the first approach faster, get a guess about our position,
back up a bit and make a second slower approach to get a exact result without losing steps.
What we do in double touch probing is the same. But the difference here is:
a. we already know where we are
b. if the first approach is to fast we will lose steps here to.
But this time there is no second approach to set the position to 0. We are measuring only.
The lost steps are permanent until we home the next time.
So if you experienced permanently rising values in M48 you now know why. (Too fast, suddenly stopped, first approach)
What can we do to improve probing?
We can use the information about our current position.
We can make a really fast, but deaccelerated, move to a place we know it is a bit before the trigger point.
And then move the rest of the way really slow.
2016-07-30 03:00:49 +02:00
Scott Lahteine
c31f56a38c
Deprecate EXTRUDER_WATTS and BED_WATTS
2016-07-29 17:34:14 -07:00
Scott Lahteine
e1970b4b28
Show power output in same order as temp output
2016-07-29 14:55:22 -07:00
Scott Lahteine
74df828acc
Show ADC values inline rather than after
2016-07-29 14:55:18 -07:00
João Brázio
2b5faa61e2
Consolidates Buzzer and Speaker into a single object
2016-07-29 19:25:39 +01:00
João Brázio
8093c5f534
Non-blocking speaker now uses arduino's tone()
2016-07-29 18:45:50 +01:00
João Brázio
8896f08074
Fixes a compilation error introduced by #4448
2016-07-29 18:33:42 +01:00
Scott Lahteine
ea5ac94804
Improved MANUAL_[XYZ]_HOME_POS
...
No need for `MANUAL_HOME_POSITIONS`. Just set each one as-needed to
override the automatic behavior.
2016-07-28 19:51:48 -07:00
Scott Lahteine
b40661cb18
Fix output of heater states
2016-07-28 17:40:01 -07:00
Scott Lahteine
9083e5420a
Merge pull request #4419 from AnHardt/sd2pinmap
...
Switch Sd2CardLib to fastio
2016-07-28 17:38:46 -07:00
Scott Lahteine
6f59560526
Merge pull request #4448 from jbrazio/speaker-followup
...
A little cleanup at speaker.h
2016-07-28 17:37:36 -07:00
Scott Lahteine
c94b6dd3e7
Revert to SanityCheck on every .cpp file
2016-07-28 17:17:50 -07:00
Scott Lahteine
256b03598d
Merge pull request #4450 from thinkyhead/rc_fix_delta_optimization
...
Fix DELTA speed calculation
2016-07-28 16:50:04 -07:00
Scott Lahteine
753283e020
inverse_second => inverse_mm_s
2016-07-28 16:35:18 -07:00
Scott Lahteine
83e1d90ca3
Undo errant optimization of block->millimeters
2016-07-28 16:26:52 -07:00
João Brázio
909e98b1af
A little cleanup at speaker.h
2016-07-29 00:03:25 +01:00
Scott Lahteine
ae1c7bca1b
Merge pull request #4445 from thinkyhead/rc_fix_rdfgsc_mega3
...
Fix for R.D.F.G.S.C. with MEGATRONICS 3 board
2016-07-28 15:55:30 -07:00
Scott Lahteine
03fdb26cd2
Wrangle encoder bits, LCD_CLICKED
2016-07-28 14:44:37 -07:00
Scott Lahteine
155def24c6
BLEN_A, B, C are defined in ultralcd headers
2016-07-28 14:38:50 -07:00
Scott Lahteine
42dcc3bf50
Remove "the click" comments
2016-07-28 14:38:50 -07:00
Scott Lahteine
0eba65f96b
Fix for R.D.F.G.S.C. with MINITRONICS board
2016-07-28 14:38:50 -07:00
fabtopia
83d0d59303
Fix for R.D.F.G.S.C. with MEGATRONICS 3 board
...
The support for reprapworld LCD boke the code for the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER. See Full Grapics Display does not work any more after #4408 #4439
2016-07-28 13:12:19 -07:00
João Brázio
4f191a384b
Moves the font folder into the buildroot
2016-07-28 19:56:41 +01:00
Scott Lahteine
5367d56f87
Merge pull request #4434 from thinkyhead/rc_delta_safe_homing
...
DELTA should ignore Z_SAFE_HOMING
2016-07-27 23:41:52 -07:00
Scott Lahteine
2525528fb2
DELTA should ignore Z_SAFE_HOMING
2016-07-27 23:25:56 -07:00
Scott Lahteine
ab4b2a66ff
Allow zero Z_RAISE_BETWEEN_PROBINGS
2016-07-27 05:00:58 -07:00
Scott Lahteine
8953e3e984
Allow Z_SAFE_HOMING without a probe
2016-07-27 04:33:56 -07:00
AnHardt
e4942d2163
Switch SD2cadrLib to fastio
...
Replace all fastDigitalRead/Write() with READ/WRITE()
Define SCK_PIN, MISO_PIN, MOSI_PIN in pins.h if not already defined in the pins_*.h files.
Remove these conditional pin definitions from the pin-files. They are now always defined.
Define separate sets of SPI-pins for AT90USB with and without Teensy support in fastio.h.
Likely this was the main reason for all that confusion about the AT90USB-SPI pins.
2016-07-27 12:40:44 +02:00
Scott Lahteine
21e744c454
Allow zero raise for deploy/stow
2016-07-26 17:19:25 -07:00
Scott Lahteine
54084612fd
Merge pull request #4415 from petrzjunior/transl
...
[LANGUAGE] Update Czech (Info screen strings)
2016-07-26 13:20:20 -07:00
Scott Lahteine
5597400cda
Merge pull request #4414 from thinkyhead/rc_split_conditionals
...
Split up Conditionals.h into two files
2016-07-26 13:16:52 -07:00
Scott Lahteine
4be635ec6e
Remove MSG_PRINT_TIME from languages
2016-07-26 12:47:45 -07:00
Scott Lahteine
3be49881c0
Make SanityCheck.h a catch-all for obsolete configs
2016-07-26 12:41:40 -07:00
Scott Lahteine
fa647cca23
Do the sanity check just once per build
2016-07-26 12:37:14 -07:00
Scott Lahteine
24a1a16e5d
Move versioning to MarlinConfig.h
2016-07-26 12:37:14 -07:00
Scott Lahteine
7e70a0b05d
Move pins / Arduino includes to MarlinConfig.h
2016-07-26 12:37:14 -07:00
Scott Lahteine
d9f7ed9a3c
Move some macros from Marlin.h to macros.h
2016-07-26 12:37:13 -07:00
Scott Lahteine
277899c175
Move include _Bootscreen.h where needed
2016-07-26 12:37:13 -07:00
Scott Lahteine
83c4653c71
Include boards and macros ahead of configs
2016-07-26 12:19:50 -07:00
Scott Lahteine
5f4702ecb2
Make Conditionals.h a catch-all for old configs
2016-07-26 12:19:50 -07:00
Scott Lahteine
8a44928df3
Make Conditionals.h a catch-all for old configs
2016-07-26 12:19:50 -07:00
Petr Zahradník junior
3d9b878cf0
Czech update
2016-07-26 13:48:27 +02:00
Scott Lahteine
c6226bb0aa
Unify config in a single include without nested includes
2016-07-25 23:04:19 -07:00
Scott Lahteine
2d378fac1b
No need to include thermistortables.h in Configuration.h
2016-07-25 22:43:50 -07:00
Scott Lahteine
df27d01cd9
Arrange needed includes in Marlin.h
2016-07-25 20:53:36 -07:00
Scott Lahteine
93ea281061
Split up Conditionals.h into two files
...
Rather than include twice, which is tricky but may confuse
2016-07-25 20:30:45 -07:00
Scott Lahteine
8684570f68
Merge pull request #4412 from thinkyhead/rc_followup_4402
...
Followup #4402 fixing 3-point leveling
2016-07-25 16:10:50 -07:00
Scott Lahteine
c55b7d0750
Merge pull request #4405 from thinkyhead/rc_theres_always_something
...
Move HAS_DIGIPOTSS to Conditionals.h
2016-07-25 15:58:42 -07:00
Scott Lahteine
42eebcd518
Merge pull request #4409 from thinkyhead/rc_cleanup_comment
...
Clean up Transfer Buffer Size comment
2016-07-25 15:58:34 -07:00
Scott Lahteine
5272147f7c
Followup #4402 fixing 3-point leveling
2016-07-25 15:56:34 -07:00
Scott Lahteine
fcc39e2b5f
Clean up Transfer Buffer Size comment
2016-07-25 12:54:55 -07:00
Scott Lahteine
0c0a63322b
Patches to prepare REPRAPWORLD_GRAPHICAL_LCD
2016-07-25 12:10:25 -07:00
brupje
a60a668f6b
Support for REPRAPWORLD_GRAPHICAL_LCD
2016-07-25 12:10:25 -07:00
Scott Lahteine
4f2ff46ab9
Move HAS_DIGIPOTSS to conditionals
2016-07-25 00:10:46 -07:00
Scott Lahteine
54f4f80077
Merge pull request #4404 from thinkyhead/rc_better_stepper_indirection
...
Arrange stepper_indirection by axis
2016-07-24 19:26:39 -07:00
Scott Lahteine
169c21b477
Merge pull request #4402 from thinkyhead/rc_consistent_positioning
...
Account for coordinate space offsets
2016-07-24 19:23:20 -07:00
Scott Lahteine
750a1e5116
Arrange stepper_indirection by axis
2016-07-24 19:00:51 -07:00
Scott Lahteine
7c27f34996
Merge pull request #4397 from thinkyhead/rc_tweak_eeprom
...
Neaten up EEPROM read/write functions
2016-07-24 18:45:54 -07:00
Scott Lahteine
2595a40a61
Account for coordinate space more in G28 / G29 / M48
2016-07-24 18:34:05 -07:00
Scott Lahteine
060dc6d95a
Neaten up EEPROM read/write functions
2016-07-24 18:19:39 -07:00
Scott Lahteine
b7b7c90477
Merge pull request #4389 from thinkyhead/rc_optimize_planner
...
Optimize planner with precalculation, etc.
2016-07-24 17:48:23 -07:00
Scott Lahteine
6900bb2286
Merge pull request #4395 from tnw513/italian_fix
...
Update Italian translations. Remove trailing spaces.
2016-07-24 17:47:48 -07:00
Scott Lahteine
e4816293a8
serial_echopair_P for uint16_t
2016-07-24 17:46:37 -07:00
Scott Lahteine
d8e5af6834
Use RAW_POSITION for MBL in planner.set_position_mm
2016-07-24 17:20:36 -07:00
Scott Lahteine
b183442c61
Fix inactive_extruder_x_pos for coordinate space
2016-07-24 17:20:36 -07:00
Scott Lahteine
f75b0c2ee1
Make POSITION macros global
2016-07-24 17:20:36 -07:00
Scott Lahteine
101b60ef42
Tweak Dual X Carriage data spacing
2016-07-24 17:20:35 -07:00
Scott Lahteine
1fe60b723f
Merge pull request #4400 from thinkyhead/rc_sanity_check_temp_sensor
...
Sanity check for too many temp sensors
2016-07-24 15:38:41 -07:00
Scott Lahteine
bedda3be61
Patch generic delta error caught by sanity check
2016-07-24 15:24:40 -07:00
Scott Lahteine
a5212bf277
Sanity check for too many temp sensors
2016-07-24 13:47:27 -07:00
Scott Lahteine
d8f2876753
Replace some float division with multiplication
2016-07-24 13:27:50 -07:00
Scott Lahteine
ddde785b37
Code formatting in planner.cpp
2016-07-24 13:27:50 -07:00
Scott Lahteine
f8b5749235
Replace division in planner with multiplication
2016-07-24 13:27:49 -07:00
Scott Lahteine
b921f6b69d
Optimize calculation of block->millimeters for DELTA
2016-07-24 13:27:49 -07:00
Scott Lahteine
db5df9500b
Move sync_plan_position closer to the top
2016-07-24 13:27:49 -07:00
Scott Lahteine
2839c56f5a
Merge pull request #4390 from jbrazio/duration_t
...
Renamed timestamp_t to duration_t
2016-07-24 13:24:05 -07:00
Scott Lahteine
d6c50671d3
Sanitycheck: Z_SAFE_HOMING points are reachable
2016-07-24 10:54:47 -07:00
Scott Lahteine
a6203366b6
Sanitycheck: Z_SAFE_HOMING requires a probe
2016-07-24 10:54:25 -07:00
Scott Lahteine
bbe5b80492
Always define probe limits if there is a probe
2016-07-24 10:53:58 -07:00
Silvio Didonna
950397f2a0
Added missing translations. Removed trailing spaces for consistency ( #4376 )
2016-07-24 17:22:30 +02:00
João Brázio
50fb0f7cec
M31 serial output is now always in EN
2016-07-24 15:52:03 +01:00
João Brázio
62d96d72f3
Renamed timestamp_t to duration_t
2016-07-24 03:16:02 +01:00
Scott Lahteine
3e2b3353b0
Fix axis indices for COREYZ
2016-07-23 19:02:14 -07:00
Scott Lahteine
c287846f46
Merge pull request #4387 from thinkyhead/rc_anhardt_more_4370
...
Update Z in a unified way in run_z_probe
2016-07-23 16:47:10 -07:00
Scott Lahteine
22d0654fe6
Merge pull request #4382 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
2016-07-23 16:31:38 -07:00
Scott Lahteine
bb93b6822a
Use set_current_from_steppers_for_axis
2016-07-23 15:25:54 -07:00
AnHardt
96a162beda
Use implications from #4370 in run_z_probe()
...
See also https://github.com/MarlinFirmware/Marlin/pull/4370#issuecomment-234713680
2016-07-23 13:09:28 -07:00
Scott Lahteine
4e67a85a5d
Macros to loop over axes
2016-07-23 13:09:28 -07:00
esenapaj
784be56e99
Follow-up the PR #4353 (General cleanup: enum)
...
・Update description of M111
2016-07-24 00:53:35 +09:00
esenapaj
3c11977558
Update Japanese translation
...
・Add translation
・Change translation
・Remove translation
2016-07-23 22:07:20 +09:00
Scott Lahteine
08459a003f
Undo the self-sabotage that is do_blocking_move_to_axis_pos
2016-07-23 00:59:11 -07:00
esenapaj
d32c4056ad
Fix for the PR #4379 (Additional logging of do_blocking_move_to)
...
・Remove unneeded PSTR()
2016-07-23 16:38:57 +09:00
Scott Lahteine
8099ee51a5
Merge pull request #4379 from thinkyhead/rc_blocking_move_logging
...
Additional logging of do_blocking_move_to
2016-07-23 00:10:55 -07:00
Scott Lahteine
8633b644cf
Merge pull request #4378 from thinkyhead/rc_debug_leveling_docs
...
Document DEBUG_LEVELING_FEATURE
2016-07-22 23:57:01 -07:00
Scott Lahteine
ad16d5019e
Additional logging of do_blocking_move_to
2016-07-22 23:53:08 -07:00
Scott Lahteine
bb9da6ebdd
Document DEBUG_LEVELING_FEATURE
2016-07-22 23:37:41 -07:00
Scott Lahteine
652fd8a826
Merge pull request #4362 from thinkyhead/rc_duplication_mode
...
DUAL_NOZZLE_DUPLICATION_MODE
2016-07-22 21:17:59 -07:00
Scott Lahteine
1766b990b8
Merge pull request #4376 from jbrazio/timestamp_t-short
...
Adds short format to timestamp_t
2016-07-22 21:17:17 -07:00
Scott Lahteine
6da3729531
Merge pull request #4370 from thinkyhead/rc_delta_fwd_kinematics
...
Delta Forward Kinematics (and LOGICAL_POSITION)
2016-07-22 21:16:00 -07:00
João Brázio
9e5dbf67e8
Update the stats menu to include longest job and extruded filament
2016-07-23 03:05:45 +01:00
João Brázio
86d9311495
Rework LCD implementation to use timestamp_t
2016-07-23 03:05:36 +01:00
Scott Lahteine
b3eb0c8569
Add LOGICAL_POSITION macro, apply to kinematics
2016-07-22 18:38:13 -07:00
Scott Lahteine
35a610abf9
const arg to inverse_kinematics
2016-07-22 17:42:48 -07:00
João Brázio
b4aad85c9a
Rework stats menu to use timestamp_t
2016-07-23 01:42:21 +01:00
João Brázio
ecd48027fa
Adds short timestamp format to timestamp_t
2016-07-23 01:41:25 +01:00
Scott Lahteine
b6afa028f4
Don't call adjust_delta on SCARA
2016-07-22 16:36:34 -07:00
Scott Lahteine
d5e2d523c7
Generalize kinematics function names
2016-07-22 16:36:34 -07:00
Scott Lahteine
9c4ad7d7ef
Clean up delta declarations in Marlin_main.cpp
2016-07-22 16:36:33 -07:00
Scott Lahteine
4b1725628b
Move kinematic functions to "private" scope
2016-07-22 16:36:33 -07:00
Scott Lahteine
cde068ea42
Use set_current_from_steppers in quickstop_stepper
2016-07-22 16:36:33 -07:00
Scott Lahteine
9f30cc84ce
Use set_current_from_steppers for other kinematics
2016-07-22 16:36:33 -07:00
AnHardt
5db9b940ee
Use forwardKinematics in DELTA run_z_probe()
2016-07-22 16:36:33 -07:00
Scott Lahteine
b5a9647fec
Use ENABLED in stepper_indirection.h
2016-07-22 16:26:06 -07:00
Scott Lahteine
cbc7f22ad9
Implement DUAL_NOZZLE_DUPLICATION_MODE
2016-07-22 16:23:58 -07:00
Scott Lahteine
91777dd76c
Add DUAL_NOZZLE_DUPLICATION_MODE option
2016-07-22 16:22:56 -07:00
Scott Lahteine
260bbb3109
Fix a couple of simple typos
2016-07-22 16:22:56 -07:00
Scott Lahteine
179e091473
Merge pull request #4374 from thinkyhead/rc_jbrazio_timestamp_t
...
Implements timestamp_t structure
2016-07-22 16:08:10 -07:00
AnHardt
499e404fbf
forwardKinematics for Delta printers
2016-07-22 16:01:51 -07:00
João Brázio
23043a1e05
Rework some code to use timestamp_t struct (saves 72 bytes)
2016-07-22 15:53:31 -07:00
João Brázio
9388dcfa49
Implements timestamp_t structure
2016-07-22 15:53:31 -07:00
Scott Lahteine
0b2c608d2f
Merge pull request #4372 from jbrazio/gcc-bark
...
Fix minor gcc warning
2016-07-22 15:18:53 -07:00
Scott Lahteine
311c7dadb6
Cleanup do_blocking_move_to for DELTA
2016-07-22 14:18:45 -07:00
Scott Lahteine
b78590e63d
Patch and cleanup run_z_probe
2016-07-22 14:18:45 -07:00
João Brázio
2f7716987d
Fix minor gcc warning
2016-07-22 16:08:56 +01:00
João Brázio
efd3aabda8
Adds missing documentation to the point_t structure
2016-07-22 15:19:20 +01:00
Scott Lahteine
39caef4279
Merge pull request #4361 from AnHardt/imp-dbmt-for-delta
...
DELTA do_blocking_move_to() more like the Chartesian one
2016-07-21 20:05:04 -07:00
Scott Lahteine
7d869ad98b
Merge pull request #4365 from thinkyhead/rc_shrink_planner_accel
...
Adjustments to planner acceleration limit
2016-07-21 18:18:15 -07:00
AnHardt
376a57232e
DELTA do_blocking_move_to() more like the Chartesian one
2016-07-22 03:12:46 +02:00
Scott Lahteine
824c6859e2
Merge pull request #4369 from thinkyhead/rc_no_static_moves
...
inline to fix warnings, smaller build size (sometimes)
2016-07-21 14:46:09 -07:00
Scott Lahteine
976c31235d
inline to fix warnings, smaller build size (sometimes)
2016-07-21 13:49:37 -07:00
AnHardt
6ef26a85d8
Back to the differences method in run_z_probe()
2016-07-21 18:16:38 +02:00
Scott Lahteine
4226f56f53
Revert the planner acceleration logic somewhat
2016-07-20 19:19:47 -07:00
Scott Lahteine
16e5348659
Merge pull request #4360 from thinkyhead/rc_toolchange_for_G28
...
Always switch to tool 0 for G28
2016-07-20 19:07:35 -07:00
Scott Lahteine
209f5c03d0
Fewer temporary vars in planner accel limit
2016-07-20 18:29:29 -07:00
Scott Lahteine
62ecd107ba
Patch ultralcd_impl header conditional names
2016-07-20 09:36:55 -07:00
Scott Lahteine
d2e9a9c188
Always switch to tool 0 for G28
2016-07-20 09:36:55 -07:00
Scott Lahteine
194d9521c3
Merge pull request #4356 from thinkyhead/rc_simpler_run_z_probe
...
Unify run_z_probe
2016-07-19 19:02:39 -07:00
Scott Lahteine
4a6ed5e221
Use HOMING_FEEDRATE_Z for Z_PROBE_SPEED_FAST
2016-07-19 18:42:48 -07:00
AnHardt
09a3cc33e6
Unify run_z_probe
...
Unify run_z_probe
Add double touch for DELTAs.
Introduce Z_PROBE_SPEED_FAST and Z_PROBE_SPEED_SLOW
defaulting to homing_feedrate_mm_m[Z_AXIS] and homing_feedrate_mm_m[Z_AXIS]/2
2016-07-19 18:42:48 -07:00
Scott Lahteine
6137a1d934
Merge pull request #4359 from thinkyhead/rc_wrangle_movement_etc
...
Use ENABLED(MAPPER_NON)
2016-07-19 18:22:55 -07:00
Scott Lahteine
0432613ad7
use enabled macro for mapper setting
2016-07-19 18:08:56 -07:00
Scott Lahteine
e44b37cdc2
motion section marker below homing speeds
2016-07-19 17:31:58 -07:00
Scott Lahteine
204fd6ec44
Set homing feedrates individually
2016-07-19 17:31:58 -07:00
Scott Lahteine
2bad02e60d
Reprapworld Keypad: F1 opens the Move Axis menu
2016-07-19 16:40:39 -07:00
Scott Lahteine
eaa6f568ee
Prevent re-entrant call of Reprapworld Keypad handler
2016-07-19 16:40:39 -07:00
Scott Lahteine
6abf916575
Reprapworld Keypad move step is 1mm
2016-07-19 16:40:39 -07:00
Scott Lahteine
06ac1f3bcf
Reduce Reprapworld Keypad move code size
2016-07-19 16:40:39 -07:00
Scott Lahteine
5d5affdfca
Merge pull request #4355 from thinkyhead/rc_rename_ultralcd_files
...
Rename ultralcd implementation files for consistency
2016-07-19 16:14:27 -07:00
Scott Lahteine
bb225dedc6
Merge pull request #4354 from thinkyhead/rc_jbrazio_rework_g12
...
NOZZLE_CLEAN_FEATURE with no dependency on HAS_BED_PROBE
2016-07-19 15:26:59 -07:00
Scott Lahteine
8a2efd1155
Rename ultralcd implementation files for consistency
2016-07-19 15:26:14 -07:00
João Brázio
b869fbc05e
Update all config files with the new G12 options
2016-07-19 15:07:03 -07:00
João Brázio
47fef80848
Nozzle::clean() no longer requires HAS_BED_PROBE
2016-07-19 15:07:02 -07:00
Scott Lahteine
f1f1bac0e1
Merge pull request #4341 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
2016-07-19 15:04:22 -07:00
Scott Lahteine
6c899bb520
Merge pull request #4349 from jbrazio/gcc-bark-bark
...
Removes some minor GCC warnings
2016-07-19 13:42:33 -07:00
Scott Lahteine
ef0a22871e
Merge pull request #4350 from jbrazio/followup-a875861
...
Adds utility.h
2016-07-19 13:40:52 -07:00
Scott Lahteine
9eba58a031
Merge pull request #4351 from jbrazio/u8glib-converter
...
Updates u8glib's bmp2hex converter
2016-07-19 13:39:33 -07:00
Scott Lahteine
c502018eab
Merge pull request #4353 from jbrazio/global-enum-file
...
General cleanup: enum
2016-07-19 13:37:56 -07:00
Scott Lahteine
0f9953b031
Merge pull request #4342 from AnHardt/rep-cons-g28
...
Introduce line_to_axis_pos() for use in homeaxis()
2016-07-19 12:56:58 -07:00
AnHardt
11c075c6b2
Introduce line_to_axis_pos(axis_codes axis, float where, float feed_rate = 0.0)
...
and use it in `homeaxis()` instead of `do_blocking_move_to_axis_pos()`.
`do_blocking_move_to_axis_pos` was wrong because it performed subdivided, delta-corrected moves for x- and y-axis.
The first common move for delta homing is like quick_home but for 3 towers.
Fix two warnings.
2016-07-19 17:24:44 +02:00
João Brázio
3ebad4e020
Moves all global enums to a central file
2016-07-19 14:31:09 +01:00
João Brázio
238fefcb00
Updates Stopwatch class to use internal state enum
2016-07-19 14:30:44 +01:00
João Brázio
30ac0782a9
Comment section style correction
2016-07-19 03:27:42 +01:00
João Brázio
8ecee431c4
Updates u8glib's bmp2hex converter
2016-07-19 03:16:30 +01:00
João Brázio
79e7721b76
Removes some minor GCC warnings
2016-07-19 03:03:11 +01:00
João Brázio
f4d63796b2
Adds utility.h
2016-07-19 02:55:23 +01:00
esenapaj
361307831e
Follow-up the PR #4335 (Debug char, fix compile errors for lcd pins)
...
・Solve a flickering when SD card is inserted or removed at using a ASCII
LCD + language_kana.h
2016-07-18 20:09:24 +09:00
esenapaj
ff48bbb86a
Update Japanese translation
...
・Add new translation
2016-07-18 17:01:56 +09:00
Scott Lahteine
46117593b9
Merge pull request #4185 from esenapaj/Update-Japanese-translation
...
Update Japanese translation (work in progress)
2016-07-17 18:36:34 -07:00
Scott Lahteine
3422103863
Merge pull request #4310 from thinkyhead/rc_mbl_position_shift
...
Fix position shift with MBL
2016-07-17 18:31:25 -07:00
Scott Lahteine
92757bd7b3
Merge pull request #4339 from esenapaj/Follow-up-the-PR-#4163
...
Follow-up the PR #4163 (Mixing and Switching Extruders)
2016-07-17 18:15:23 -07:00
Scott Lahteine
493d30cd97
Drop intermediate nx, ny, and set destination directly
2016-07-17 17:59:52 -07:00
Scott Lahteine
07a735ad22
We always use destination so modify mesh_buffer_line
2016-07-17 17:57:33 -07:00
Scott Lahteine
04a5b7b257
A macro to normalize positions
2016-07-17 17:57:32 -07:00
esenapaj
5c8e87a866
Follow-up the PR #4163 (Mixing and Switching Extruders)
...
・Update forgotten K8400 files
2016-07-18 09:48:13 +09:00
Scott Lahteine
86eb5251c5
Fix some debug messages
2016-07-17 17:10:02 -07:00
Scott Lahteine
1e57a6af73
Use blocking_move, current_position in G28 homing
2016-07-17 16:56:13 -07:00
Scott Lahteine
f6a3a1da09
nz and ne are always set, so drop them down
2016-07-17 14:12:39 -07:00
Scott Lahteine
d0009e013b
Rename cell index vars
2016-07-17 14:12:39 -07:00
Scott Lahteine
697373b071
Reduce code size of mesh_buffer_line
2016-07-17 14:11:25 -07:00
Scott Lahteine
103d312f6d
MBL can actually do up to 9 x 9
2016-07-17 14:11:25 -07:00
Scott Lahteine
f4a69281fc
Only call mesh_buffer_line when MBL is active
2016-07-17 14:11:25 -07:00
Scott Lahteine
799a31cd30
Include the position_shift when splitting mesh lines
2016-07-17 14:08:20 -07:00
Scott Lahteine
f242aea032
Merge pull request #4319 from thinkyhead/rc_feedrates_to_mess_with_you
...
Wrangle feed rate variables
2016-07-17 14:07:52 -07:00
Scott Lahteine
0342661b3f
Merge pull request #4335 from thinkyhead/rc_status_pad_jp
...
Debug char, fix compile errors for lcd pins
2016-07-17 14:07:08 -07:00
Scott Lahteine
81e01152bb
Merge pull request #4336 from thinkyhead/rc_bltouch_sensor
...
BLTouch probe sensor
2016-07-17 14:06:32 -07:00
Scott Lahteine
1583177ef4
BLTOUCH probe config option
2016-07-17 13:55:38 -07:00
Scott Lahteine
176b9627c7
Some cleanup ahead of BLTOUCH support
2016-07-17 13:55:38 -07:00
Scott Lahteine
39706f3e57
Endstop invert flags as macros instead of const bool
2016-07-17 13:51:02 -07:00
Scott Lahteine
7242d44810
Endstops vars already initialized
2016-07-17 13:38:48 -07:00
Scott Lahteine
5ed1e7a464
codenum => dwell_ms
2016-07-17 13:35:21 -07:00
Scott Lahteine
69d6016941
Revert default state of endstops in M502
2016-07-17 13:35:21 -07:00
Scott Lahteine
0fcd3706dd
Replace ENDSTOPS_ONLY_FOR_HOMING with ENDSTOPS_ALWAYS_ON_DEFAULT
2016-07-17 13:35:21 -07:00
Scott Lahteine
671634bf11
Fix spacing after section header
2016-07-17 13:35:21 -07:00
Scott Lahteine
f38553b482
fix a debug message
2016-07-17 13:29:42 -07:00
Scott Lahteine
3d78b8f929
Use HYPOT macro instead of hypot function
2016-07-17 13:29:42 -07:00
Scott Lahteine
9f9fe043ba
Apply sq macro throughout
2016-07-17 13:29:41 -07:00
Scott Lahteine
93ba5bddd7
Append units to feedrate variables
2016-07-17 13:29:41 -07:00
Scott Lahteine
5e3d3918b6
Patch compile error for RAMPS LCD pins
2016-07-17 12:27:37 -07:00
Scott Lahteine
94955a8bf7
pad string in lcd_finishstatus
2016-07-17 12:27:37 -07:00
Scott Lahteine
21ee0612e3
Debug char
2016-07-17 12:27:36 -07:00
Scott Lahteine
8f24e0a556
Debugging of MBL in G28
2016-07-17 11:08:30 -07:00
Scott Lahteine
05da02f0a2
Implement MIXING_EXTRUDER and SWITCHING_EXTRUDER
2016-07-17 10:53:10 -07:00
Scott Lahteine
22b4cff423
New extruder type configuration options
2016-07-17 00:13:56 -07:00
esenapaj
601015b73e
Update Japanese translation
2016-07-17 16:04:12 +09:00
Scott Lahteine
9766e24504
Merge pull request #4277 from thinkyhead/rc_mks_13_viki2
...
Support for VIKI2 with MKS 1.3 / 1.4
2016-07-16 23:49:33 -07:00
Scott Lahteine
02285662f5
Merge pull request #4298 from jbrazio/feature/filament-counter
...
Adds filamentUsed and longestPrint stats to PrintCounter
2016-07-16 23:48:46 -07:00
Scott Lahteine
bf16ae5a70
Merge pull request #4299 from jbrazio/feature/g27-park-nozzle
...
Implements park nozzle feature
2016-07-16 23:47:12 -07:00
Scott Lahteine
aaa0d298b9
Merge pull request #4326 from thinkyhead/rc_no_static_items_fix
...
Suppress compiler warnings in ultralcd.cpp
2016-07-16 23:38:08 -07:00
Scott Lahteine
cc3ef73583
Merge pull request #4327 from thinkyhead/rc_petrzjr_long_print
...
LCD Longer print
2016-07-16 23:37:34 -07:00
Scott Lahteine
77c8fb627f
Merge pull request #4329 from thinkyhead/rc_italian_fix
...
Added missing Italian translations
2016-07-16 23:37:15 -07:00
Scott Lahteine
b14888501b
Merge pull request #4301 from Ingramz/RCBugFix
...
Add Cartesio CN Controls V11
2016-07-16 22:35:07 -07:00
Silvio Didonna
32e0d71729
Added missing translations
2016-07-16 22:26:46 -07:00
Scott Lahteine
0f3232065e
Merge pull request #4305 from jbrazio/feature/splash-improvement
...
Custom boot screen feature improvement
2016-07-16 21:59:39 -07:00
Petr Zahradník junior
2d7fe9dc78
LCD Longer print
2016-07-16 18:21:06 -07:00
Scott Lahteine
eee903bd4b
Format some DAC lines
2016-07-16 17:59:13 -07:00
Scott Lahteine
d53dcaa796
Suppress some compiler warnings
2016-07-16 17:59:01 -07:00
João Brázio
fa4274cf4c
Improves the custom bootscreen logo feature
2016-07-17 01:31:44 +01:00
João Brázio
1f3283e3a5
Adds custom boot logos for bq Hephestos 2 and Cartesio
2016-07-17 01:31:36 +01:00
João Brázio
dfa1c45075
Adds a notice to vendors about the SHOW_CUSTOM_BOOTSCREEN directive
2016-07-17 01:15:17 +01:00
Scott Lahteine
ed468e848f
Merge pull request #4321 from esenapaj/Follow-up-the-PR-#4287
...
Follow-up and fix the PR #4287 (Allow stopwatch and printcounter to go over 18:12:15)
2016-07-16 17:14:21 -07:00
João Brázio
a8758619ec
The safe_delay() is now globaly accessible
2016-07-16 12:28:06 +01:00
João Brázio
9a00108cb6
Adds the WEBSITE_URL as the boot screen line 2
2016-07-16 12:24:37 +01:00
João Brázio
f5234b0695
Adds a customizable screen timeout for the default boot screen
2016-07-16 12:24:36 +01:00
João Brázio
2f26bc2153
Adds filamentUsed and longestPrint stats to PrintCounter
2016-07-16 12:12:27 +01:00
João Brázio
336481ea81
Added G27 configuration options to all configs
2016-07-16 12:07:59 +01:00
João Brázio
c711701626
Implements a nozzle parking command (G27)
2016-07-16 12:07:59 +01:00
João Brázio
5f368d1bc3
Followup for #4320
2016-07-16 11:57:35 +01:00
João Brázio
d7c51bc4b9
Merge pull request #4320 from jbrazio/followup/4307
...
Moves do_blocking_move_to_xy() out of the HAS_BED_PROBE define
2016-07-16 11:48:00 +01:00
esenapaj
af9b1d79b1
Follow-up and fix the PR #4287 (Allow stopwatch and printcounter to go over 18:12:15)
...
・Remove MSG_END_HOUR and MSG_END_MINUTE from all the language files
・Change from MSG_INFO_TOTAL_PRINTS to MSG_INFO_PRINT_COUNT in German
file
2016-07-16 18:39:22 +09:00
Scott Lahteine
e563634a25
Merge pull request #4314 from AnHardt/use-d_b_m_t-in-g28
...
Use do_blicking_move_to*() in G28
2016-07-15 20:22:02 -07:00
Scott Lahteine
59ae1811c2
Merge pull request #4303 from AnHardt/delta-g28
...
DELTA: Move out of the clip-zone after G28
2016-07-15 20:20:22 -07:00
João Brázio
fdea8b6e6a
Moves do_blocking_move_to_xy() out of the HAS_BED_PROBE define
2016-07-16 03:59:49 +01:00
AnHardt
d2a49c016d
DELTA: Move out of the clip-zone after G28
...
Move down to a safe height after G28 for DELTAs.
2016-07-15 15:22:44 +02:00
AnHardt
46994fd17d
Use do_blicking_move_to*() in G28
2016-07-15 15:02:15 +02:00
João Brázio
ffbb31b235
Fixes an PSTR overflow with print_xyz()
2016-07-15 11:25:34 +01:00
Indrek Ardel
ecb23c1b65
Add Cartesio CN Controls V11 board
2016-07-15 12:55:47 +03:00
Indrek Ardel
c8f2dd7cd5
Fix CN Controls 12 styling
2016-07-15 09:54:09 +03:00
Scott Lahteine
cec7110409
Merge pull request #4308 from thinkyhead/rc_debug_gcode_t
...
Added logging related to gcode_T
2016-07-14 19:46:33 -07:00
Scott Lahteine
6446d3939a
Merge pull request #4309 from thinkyhead/rc_static_item_fix_77
...
Fix skipping of static items
2016-07-14 19:28:49 -07:00
Scott Lahteine
95ab2fd3ae
Fix skipping of static items
2016-07-14 19:16:16 -07:00
Scott Lahteine
166f19251e
Add more debugging for leveling
...
- Especially in `gcode_T`
- In `update_software_endstops`
- Some tweaks to observe
2016-07-14 19:04:13 -07:00
Scott Lahteine
7ac0b91a45
Collapsible long comment in gcode_T
2016-07-14 18:28:41 -07:00
João Brázio
e71a631f8f
do_blocking_move_*() no longer depend on HAS_BED_PROBE
2016-07-15 01:54:14 +01:00
Scott Lahteine
8bf6861af8
Merge pull request #4054 from jbrazio/feature/g12-clean-tool
...
Implements clean nozzle feature (Lulzbot's REWIPE)
2016-07-14 14:38:38 -07:00
Scott Lahteine
c5e51f6b96
finished => completed
2016-07-14 11:46:35 -07:00
Scott Lahteine
1618870c84
card.printingHasFinished does print_job_timer.stop
2016-07-14 11:39:58 -07:00
Scott Lahteine
34da77dad3
Simply run M31 at the end of an SD print
2016-07-14 11:39:58 -07:00
Scott Lahteine
23d2bc5ab0
Patch Greek for new strings
2016-07-14 11:39:58 -07:00
Scott Lahteine
a8d71f0ac6
Support longer print times in M31
2016-07-14 11:39:58 -07:00
Scott Lahteine
e481b79af1
Allow stopwatch and printcounter to go over 18 hours
2016-07-14 11:39:57 -07:00
João Brázio
68c343a09a
Added G12 configuration options to all configs
2016-07-14 00:38:42 +01:00
João Brázio
4937f9ada4
Minor G12 tweaks and point_t struct extension
2016-07-14 00:07:36 +01:00
Scott Lahteine
6080924589
Merge pull request #4296 from jbrazio/feature/bqh2-update
...
Update the bq Hephestos 2 configuration
2016-07-13 13:18:09 -07:00
Scott Lahteine
ed89c71e53
Merge pull request #4291 from esenapaj/Follow-up-the-PR-#4278
...
Follow-up the PR #4278 (Fixups for PID_ADD_EXTRUSION_RATE and HOTENDS==1)
2016-07-13 13:17:03 -07:00
João Brázio
021544f572
Improves G12 zig-zag pattern
2016-07-13 21:14:56 +01:00
João Brázio
b05a75655a
Implements a nozzle cleaning pattern generator (G12)
2016-07-13 21:14:19 +01:00
João Brázio
005af84140
Update the bq Hephestos 2 configuration
2016-07-13 21:06:31 +01:00
esenapaj
8f03f0be9b
Follow-up the PR #4252 (Replace PLA/ABS preheating with generic)
2016-07-13 22:42:16 +09:00
esenapaj
c2c8ab4698
Follow-up the PR #4278 (Fixups for PID_ADD_EXTRUSION_RATE and HOTENDS==1)
2016-07-13 22:24:31 +09:00
Scott Lahteine
4f77adddbe
Merge pull request #4286 from thinkyhead/rc_debug_clean
...
Prefix and suffix in debug output
2016-07-12 20:49:15 -07:00
Scott Lahteine
e5c7af5ddc
Merge pull request #4222 from thinkyhead/rc_allow_cold_extrude
...
M302: Add "P" parameter, status output
2016-07-12 20:40:14 -07:00
Scott Lahteine
2224032568
Merge pull request #4285 from thinkyhead/rc_manual_move_fast_fine
...
No delay for the smallest LCD moves
2016-07-12 20:16:38 -07:00
Scott Lahteine
cdd77d23bb
Neaten up temperature member data
2016-07-12 20:04:15 -07:00
Scott Lahteine
d4c68279c8
Add "P" parameter to M302
2016-07-12 20:04:15 -07:00
Scott Lahteine
a5bae3c7d5
Merge pull request #4229 from blubbfish/patch-1
...
Update language_de.h for German translation
2016-07-12 20:01:46 -07:00
Scott Lahteine
a8b6b6a128
Merge pull request #4252 from thinkyhead/rc_rename_hpb
...
Replace PLA/ABS preheating with generic
2016-07-12 20:00:33 -07:00
Scott Lahteine
1e14df876d
Use varname as prefix in DEBUG_POS, string as suffix
2016-07-12 19:58:09 -07:00
Scott Lahteine
9e8b3e5ee6
Homing direction is irrelevant in probe raise!
2016-07-12 18:09:02 -07:00
Scott Lahteine
ecd5e810ac
No delay for the smallest LCD moves
2016-07-12 18:09:01 -07:00
Scott Lahteine
2b9515d60f
Merge pull request #4281 from AnHardt/lang-system
...
Don't use UTF-strlen() if the text is not UTF
2016-07-12 17:21:28 -07:00
Scott Lahteine
973a669aa3
Merge pull request #4264 from thinkyhead/rc_ultralcd_encoder_pos
...
Remove extraneous conditions for encoder position
2016-07-12 16:54:13 -07:00
Scott Lahteine
e9f62d8fdb
Remove extraneous conditions for encoder position
2016-07-12 16:41:00 -07:00
Scott Lahteine
7c81398f95
Merge pull request #4279 from esenapaj/Follow-up-the-PR-#4271
...
Follow-up the PR #4271 (X_DUAL_STEPPER_DRIVERS)
2016-07-12 16:39:37 -07:00
Scott Lahteine
0554b65d22
Merge pull request #4284 from thinkyhead/rc_serial_ln_macros
...
Sled-probe sanity fix, conditionals for remaining types of leveling
2016-07-12 16:36:33 -07:00
Scott Lahteine
655c3fd55f
Move delta ABL sanity checks up
2016-07-12 16:10:16 -07:00
Scott Lahteine
db0882d068
AUTO_BED_LEVELING_3POINT and DELTA_BED_LEVELING_GRID
2016-07-12 16:10:11 -07:00
Scott Lahteine
e974ac63ef
Init matrix in planner.init
2016-07-12 15:55:27 -07:00
Scott Lahteine
47d55513ec
Merge pull request #4280 from AnHardt/msg-file-upload
...
Finalalize MSG_SD_WRITE_TO_FILE message with a \n
2016-07-12 13:02:52 -07:00
AnHardt
b273736962
Make MAPPER_NON the fall back mapper
...
Make MAPPER_NON the fall back mapper - if no other is defined.
One list less to maintain.
2016-07-12 19:59:14 +02:00
AnHardt
54d35230df
Don't use UTF-strlen() if the text is not UTF
2016-07-12 19:59:03 +02:00
Scott Lahteine
a1de96d152
Merge pull request #4278 from thinkyhead/rc_more_hotends_1
...
Fixups for PID_ADD_EXTRUSION_RATE and HOTENDS==1
2016-07-12 10:36:13 -07:00
AnHardt
87957c7b44
Finalalize MSG_SD_WRITE_TO_FILE message with a \n
...
Finalalize MSG_SD_WRITE_TO_FILE message with a \n
else RH hangs.
2016-07-12 13:13:04 +02:00
esenapaj
9b5cbf2423
Follow-up the PR #4271 (X_DUAL_STEPPER_DRIVERS)
...
・Update a forgotten Configuration_adv.h of K8400
2016-07-12 17:50:49 +09:00
Scott Lahteine
809da999dc
Apply HOTEND_INDEX in preheat methods
2016-07-11 22:27:25 -07:00
Scott Lahteine
3d78b690e5
Single PID dataset with HOTENDS == 1
2016-07-11 22:27:24 -07:00
Scott Lahteine
bf9967c65d
Apply HOTEND_INDEX in MILLISECONDS_PREHEAT_TIME
2016-07-11 22:27:24 -07:00
Scott Lahteine
11dcbae7a2
Only a single E axis. Can tool-change reseed position[E_AXIS]?
2016-07-11 22:27:24 -07:00
Scott Lahteine
4865447830
Merge pull request #4276 from esenapaj/Suppress-warnings
...
Suppress warnings
2016-07-11 19:08:59 -07:00
Scott Lahteine
815df28b0b
Merge pull request #4274 from esenapaj/Follow-up-the-PR-#4024
...
Follow-up the PR #4024 (Greek Language by @psavva)
2016-07-11 19:04:44 -07:00
Scott Lahteine
44f739a5eb
Merge pull request #4273 from esenapaj/Fix-for-the-PR-#4256
...
Fix for the PR #4256 (Additional tweaks for HOTENDS == 1)
2016-07-11 19:02:45 -07:00
Scott Lahteine
02f711fe00
Merge pull request #4275 from AnHardt/dont-deploy
...
Don't deploy/stow the probe if z-min-endstop is used for homing
2016-07-11 18:46:23 -07:00
Scott Lahteine
6a45aad893
Merge pull request #4272 from AnHardt/m100-rep
...
Repair M100
2016-07-11 18:45:13 -07:00
Scott Lahteine
243ad4312a
Merge pull request #4271 from thinkyhead/rc_X_DUAL_STEPPER_DRIVERS
...
X_DUAL_STEPPER_DRIVERS
2016-07-11 18:38:45 -07:00
Scott Lahteine
6e68dd292b
Merge pull request #4243 from thinkyhead/rc_fix_static_scrolling
...
Improve STATIC_ITEM implementation
2016-07-11 18:25:00 -07:00
Scott Lahteine
d17b161832
Don't draw current screen if simply changing screens
2016-07-11 18:14:04 -07:00
Scott Lahteine
096f9981d1
Scroll to the top when changing screens
2016-07-11 18:14:04 -07:00
Scott Lahteine
7ae84d768e
Tweak conditionals for REPRAPWORLD_KEYPAD
2016-07-11 18:14:04 -07:00
Scott Lahteine
155af6b861
Rename vars, add comments for menu macros
2016-07-11 18:14:04 -07:00
Scott Lahteine
31f2cf5f6f
Make encoderLine signed for proper compares
2016-07-11 18:14:03 -07:00
Scott Lahteine
d9f75f62c0
START_ROW => START_COL
2016-07-11 18:14:03 -07:00
Scott Lahteine
d2099fef0d
Left-justify thermistor info
2016-07-11 18:14:03 -07:00
Scott Lahteine
85aeb02aa6
Invert headings on Graphical LCD
2016-07-11 18:14:03 -07:00
Scott Lahteine
3a67fb77b0
Concatenate LCD static strings
2016-07-11 18:14:02 -07:00
Scott Lahteine
13dc619f43
Scroll static screens more simply
2016-07-11 18:14:02 -07:00
Scott Lahteine
5051723c2e
Redraw after cursor correction in STATIC_ITEM
2016-07-11 18:14:02 -07:00
esenapaj
58177a1602
Suppress warnings
2016-07-12 08:22:24 +09:00
Scott Lahteine
10ebf28ee3
Allow override of ENCODER_FEEDRATE_DEADZONE, lower default for Viki
2016-07-11 15:43:08 -07:00
Scott Lahteine
9b1ba1012a
Support for VIKI2 with MKS Gen 1.3 / 1.4
2016-07-11 15:43:08 -07:00
Scott Lahteine
55dc8051d8
Cleanup of RAMPS LCD pins
2016-07-11 15:38:55 -07:00
AnHardt
7bcab26f2a
Don't deploy/stow the probe if z-min-endstop is used for homing
...
Don't deploy/stow the probe if z-min-endstop is used for homing.
Don't apply `zprobe_zoffset` if probe was not used.
2016-07-11 22:01:44 +02:00
esenapaj
84ded1f659
Follow-up the PR #4024 (Greek Language by @psavva)
...
・Update forgotten Configuration.h of K8400
2016-07-12 04:19:09 +09:00
esenapaj
6af525e252
Fix for the PR #4256 (Additional tweaks for HOTENDS == 1)
2016-07-12 03:51:29 +09:00
AnHardt
23e0134596
Repair M100
...
M100 D was running too long - caused watchdog resets.
M100 I showed more free memory than a Arduino Mega has RAM.
2016-07-11 20:44:30 +02:00
Scott Lahteine
4b4a582c4f
X_DUAL_STEPPER_DRIVERS implementation
2016-07-11 10:22:19 -07:00
Scott Lahteine
91bd6eade7
X_DUAL_STEPPER_DRIVERS configuration option
2016-07-11 10:22:19 -07:00
Scott Lahteine
6121c9018a
Merge pull request #4265 from thinkyhead/rc_buzzer_patchup
...
Two strategies to address a stuck buzzer
2016-07-10 19:46:15 -07:00
Scott Lahteine
4a100c6832
Merge pull request #4250 from AnHardt/wait-for-cooling-slope
...
Adjust wait_for_cooling slope
2016-07-10 19:45:23 -07:00
Scott Lahteine
ed018c98d5
Merge pull request #4024 from thinkyhead/rc_greek_language
...
Greek Language by @psavva
2016-07-10 19:42:09 -07:00
Scott Lahteine
d1dffc7ad1
timestamp => endtime
2016-07-10 19:36:46 -07:00
Scott Lahteine
71674059c3
Two strategies to address a stuck buzzer
2016-07-10 19:25:23 -07:00
Scott Lahteine
928ff6487a
Greek language pack from @psavva
2016-07-10 18:59:04 -07:00
AnHardt
e92e58df1f
Adjust wait_for_cooling slope
...
Adjust wait_for_cooling slope
and drop mintemp for cooling.
See
https://github.com/MarlinFirmware/Marlin/pull/4169#issuecomment-231544532
2016-07-11 03:36:23 +02:00
Scott Lahteine
167f4aa0cc
Merge pull request #4259 from clexpert/patch-3
...
Update language_cz.h
2016-07-10 18:26:23 -07:00
Scott Lahteine
8dda05e92a
Merge pull request #4258 from clexpert/patch-2
...
Total print time for LCD correction (hours:minutes format)
2016-07-10 18:25:18 -07:00
Scott Lahteine
182c8d7f8f
Dyze High Temp Thermistor Support
2016-07-10 17:59:05 -07:00
Scott Lahteine
5b0e46c986
Merge pull request #4256 from thinkyhead/rc_fix_singlenozzle_temp
...
Additional tweaks for HOTENDS == 1
2016-07-10 17:57:00 -07:00
Scott Lahteine
ee0983ab57
Further reduction when HOTENDS == 1
2016-07-10 16:54:30 -07:00
Scott Lahteine
3e1bbd5e27
Indentation in gcode_M100
2016-07-10 16:33:51 -07:00
Scott Lahteine
b72238f406
Invariant get_pid_output with HOTENDS < 2
2016-07-10 16:33:51 -07:00
Petr Zahradnik
66602f4af6
Update language_cz.h
...
New strings:
#define MSG_HALTED
#define MSG_PLEASE_RESET
Some texts shortened for smaller displays.
2016-07-10 13:25:50 +02:00
Petr Zahradnik
eaf9e615ce
Total print time for LCD correction (hours:minutes format)
2016-07-10 13:08:05 +02:00
esenapaj
9e56d5825e
Adjust spacing
2016-07-10 14:25:29 +09:00
esenapaj
5832f4b848
Follow-up the PR #4253 (Runout Sensor without SD Card, Print Timer support in M104)
...
・Update forgotten example configuration files
2016-07-10 14:24:57 +09:00
Scott Lahteine
77283f5bf0
Merge pull request #4245 from thinkyhead/rc_simpler_therm_check
...
Simpler/extensible thermistor test in thermistortables.h
2016-07-09 21:13:42 -07:00
Scott Lahteine
f9e08b1fcd
Merge pull request #4254 from AnHardt/killscreen
...
Add a kill-screen
2016-07-09 20:44:42 -07:00
AnHardt
faac2bcfdb
Add a kill-screen
2016-07-10 04:50:45 +02:00
Scott Lahteine
3b3e52616c
Merge pull request #4253 from thinkyhead/rc_clexpert_runout
...
Runout Sensor without SD Card, Print Timer support in M104
2016-07-09 19:10:36 -07:00
Scott Lahteine
aa3ab93971
Merge pull request #4240 from AnHardt/sampler-8-7-16
...
Today's fix and cleanup collection
2016-07-09 19:09:45 -07:00
Scott Lahteine
4cd045791c
Reduce code size by trusting the compiler
2016-07-09 18:17:44 -07:00
Scott Lahteine
a8538bd7ce
General cleanup, code reduction in Marlin_main.cpp
2016-07-09 18:17:44 -07:00
Scott Lahteine
1026e5b071
Replace PLA/ABS preheating with generic
2016-07-09 18:06:51 -07:00
Petr Zahradnik
e282d69f63
Print job timer comment changed
2016-07-09 17:57:54 -07:00
Petr Zahradnik
a2159cfbc3
Error message change in SanityCheck.h
2016-07-09 17:57:54 -07:00
Petr Zahradník junior
315b4c2153
Runout sensor without SD Card
2016-07-09 17:57:53 -07:00
Scott Lahteine
51c9c3fe2c
Indentation in MarlinSerial.cpp
2016-07-09 17:57:53 -07:00
Scott Lahteine
e03414b2dd
Simpler/extensible thermistor test in thermistortables.h
2016-07-08 19:54:45 -07:00
AnHardt
4b44a23a36
Add TX-buffer for MarlinSerial
...
Similar to the current Arduino HardwareSerial
but with max. 256 byte buffer-size.
Deactivated by default.
The boards with AT90USB processor (USBCON) already use a TX-buffer.
2016-07-08 17:25:21 +02:00
AnHardt
468f7f03a2
homeaxis() can leave early
...
when no known axis needs to be homed.
Most changes are only caused from altering the indentation.
```
if (axis == X_AXIS ? HOMEAXIS_DO(X) : axis == Y_AXIS ? HOMEAXIS_DO(Y) : axis == Z_AXIS ? HOMEAXIS_DO(Z) : 0) {
...
}
to
if (!(axis == X_AXIS ? HOMEAXIS_DO(X) : axis == Y_AXIS ? HOMEAXIS_DO(Y) : axis == Z_AXIS ? HOMEAXIS_DO(Z) : 0)) return;
...
```
2016-07-08 15:59:33 +02:00
AnHardt
eff7912243
Ensble/disable hardware endstops in G28 globally.
...
For moving away from the endstops we do not have to disable them.
They are not tested anyway.
2016-07-08 15:49:10 +02:00
AnHardt
f69434d81c
Eliminate void setup_for_endstop_move()
2016-07-08 15:23:20 +02:00
AnHardt
0ea6247fc2
Use logic in Z_SAFE_HOMING
...
Use logic in Z_SAFE_HOMING
From
```
if (home_all_axis || homeZ) {
if (home_all_axis) {
...
home z
}
else if (homeZ) { // Don't need to Home Z twice
home z
}
}
```
to
```
if (home_all_axis || homeZ) {
if (home_all_axis) {
...
}
home z
}
```
2016-07-08 15:08:50 +02:00
AnHardt
de3a169336
Always define MIN_Z_HEIGHT_FOR_HOMING even if 0
...
Always define MIN_Z_HEIGHT_FOR_HOMING even if 0
Always make a potential rise to `home_offset[Z_AXIS]` possible in G28.
Get rid of some very ugly constructs in MBL (ultralcd.cpp).
2016-07-08 15:08:32 +02:00
AnHardt
88ed232f53
Remove HAS_BED_PROBE case in first raise in G28
...
Differentiating made sense here when we could save a dozen lines of code,
but not for one line.
2016-07-08 14:59:44 +02:00
AnHardt
653eff3b31
Clean up quick_home_xy()
...
Since we do the actual homing now in the 'normal' routines `quick_home_xy()`
can be simplified to a relative simple diagonal move.
2016-07-08 14:59:27 +02:00
Scott Lahteine
98d0167a57
Merge pull request #4226 from thinkyhead/rc_emergency_command_parser
...
MarlinSerial emergency-command parser (with M108)
2016-07-07 16:53:55 -07:00
Scott Lahteine
2ee4e4f791
Make wait_for_heatup volatile
2016-07-07 16:37:23 -07:00
Scott Lahteine
bd5a825b8b
Wait for end of line before invoking action
2016-07-07 16:37:23 -07:00
Scott Lahteine
ea47803ae2
Simplify emergency parser (only parse initial command)
2016-07-07 16:37:22 -07:00
Scott Lahteine
834ad14c8d
Add quickstop_stepper to update current position with stepper.quick_stop()
2016-07-07 16:37:22 -07:00
Scott Lahteine
ecffe92e20
Group EMERGENCY_PARSER commands
2016-07-07 16:37:22 -07:00
AnHardt
a129078927
Add an emergency-command parser to MarlinSerial (supporting M108)
...
Add an emergency-command parser to MarlinSerial's RX interrupt.
The parser tries to find and execute M108,M112,M410 before the commands disappear in the RX-buffer.
To avoid false positives for M117, comments and commands followed by filenames (M23, M28, M30, M32, M33) are filtered.
This enables Marlin to receive and react on the Emergency command at all times - regardless of whether the buffers are full or not. It remains to convince hosts to send the commands. To inform the hosts about the new feature a new entry in the M115-report was made. "`EMERGENCY_CODES:M112,M108,M410;`".
The parser is fast. It only ever needs two switch decisions and one assignment of the new state for every character.
One problem remains. If the host has sent an incomplete line before sending an emergency command the emergency command could be omitted when the parser is in `state_IGNORE`.
In that case the host should send "\ncommand\n"
Also introduces M108 to break the waiting for the heaters in M109, M190 and M303.
Rename `cancel_heatup` to `wait_for_heatup` to better see the purpose.
2016-07-07 16:37:22 -07:00
Scott Lahteine
9f42b1a075
Merge pull request #4235 from thinkyhead/rc_revert_quickhome_test
...
Fix quick homing, tweak MIN_Z_HEIGHT_FOR_HOMING
2016-07-07 13:37:14 -07:00
Scott Lahteine
ad968f2325
Merge pull request #4234 from thinkyhead/rc_better_position_logging
...
Move XYZ in print_xyz and DEBUG_POS to the front
2016-07-07 12:31:15 -07:00
Scott Lahteine
4036c73cdd
Don't raise Z if only homing Z
2016-07-07 12:28:37 -07:00
Scott Lahteine
0b6f8f8244
Apply MIN_Z_HEIGHT_FOR_HOMING raise literally
2016-07-07 12:25:02 -07:00
Scott Lahteine
177ec20bf0
Revert quick-home changes
2016-07-07 12:17:34 -07:00
Scott Lahteine
9c5b462ef2
Move XYZ in print_xyz and DEBUG_POS to the front
2016-07-07 11:42:19 -07:00
Scott Lahteine
4e84c803a3
Merge pull request #4232 from thinkyhead/rc_no_axis_codes_needed
...
Don't use axis_codes if a literal will do
2016-07-06 20:05:16 -07:00
Scott Lahteine
e2f7cb0905
Don't use axis_codes if a literal will do
2016-07-06 18:37:21 -07:00
Scott Lahteine
6559f7359f
Fix comment on Z raise for homing, save a few bytes
2016-07-06 16:21:51 -07:00
Scott Lahteine
799c60cadc
Merge pull request #4217 from thinkyhead/rc_fix_homing_raise
...
Don't do_probe_raise with MIN_Z_HEIGHT_FOR_HOMING
2016-07-06 14:39:37 -07:00
Scott Lahteine
d7e9647505
Sanity Check for probe raises
2016-07-06 13:46:06 -07:00
Scott Lahteine
d0b29cabf3
Don't re-home X and Y if you quick homed
2016-07-06 13:46:06 -07:00
Scott Lahteine
e0a6b978f5
Don't do_probe_raise with MIN_Z_HEIGHT_FOR_HOMING
2016-07-06 13:46:05 -07:00
Philip Schell
cf8ec1216a
Update language_de.h for German translation
...
@MarlinFirmware/language-team my changes for the German language. Feel free to improve :)
2016-07-06 21:44:16 +02:00
petrzjunior
b81b77111b
Update language_cz.h
2016-07-06 21:04:34 +02:00
Scott Lahteine
7735ec5e7a
Merge pull request #4223 from thinkyhead/rc_rename_heatup
...
Change cancel_heatup to wait_for_heatup
2016-07-06 11:25:44 -07:00
Scott Lahteine
160a2be117
Change cancel_heatup to wait_for_heatup
2016-07-06 09:17:50 -07:00
AnHardt
16c83d203b
Make use of the good features of a sled probe for all probes.
...
Move and extend axis_unhomed test to deploy/stow_z_probe().
Move and extend position store/restore to deploy/stow_z_probe().
Now all kinds of probes can use the 'E' parameter in G29/M48.
Allen key probes can be used now for grid and 3-point levelling.
Deploying the Allen Key probe uses big moves in z direction.
Too dangerous for an unhomed z-axis.
Throw a compile time error when we try to configure an
Allen Key probe homing to z-min and having no other z-min-endstop.
2016-07-06 04:11:04 +02:00
AnHardt
8555816a11
Generalize and simplify 'triggered when stowed test`
...
The `PROBE_IS_TRIGGERED_WHEN_STOWED_TEST` is able to detect if a probe is
successfully deployed/stowed.
It was part of the Allen Key probes code only.
Now the function is generally available.
Currently this test is compulsory for Allen Key probes to not alter the used behaviour
If you want to add the test for an other type of probe simply add
```
#define PROBE_IS_TRIGGERED_WHEN_STOWED_TEST
```
to your config.
2016-07-06 03:56:17 +02:00
AnHardt
5126cce7fd
Move Allen Key probe move scripts to their own functions
...
There was an hidden extra move after the scripts. This is configurable now.
Added the extra moves to the relevant configs.
2016-07-06 03:46:40 +02:00
AnHardt
7d063c111c
Add a optional feedrate parameter to do_blocking_move()
...
Add a optional feedrate parameter to `do_blocking_move()` and its companions.
2016-07-06 03:46:34 +02:00
Scott Lahteine
b114b6a0b3
Save 152 bytes using uint8_t for command indices
2016-07-05 16:29:28 -07:00
Scott Lahteine
0d4ff0c48b
Allow the queue to be cleared from within commands
2016-07-05 16:25:20 -07:00
Scott Lahteine
c450851401
Merge pull request #4209 from AnHardt/too-high-G28
...
Make raise for probe deploy relative in homeaxis()
2016-07-05 11:07:42 -07:00
AnHardt
f799f18388
MBL typo
2016-07-05 18:19:53 +02:00
AnHardt
8b02e68cb6
Make raise for probe deploy relative in homeaxis()
...
Make raise for probe deploy relative in homeaxis()
by setting `current_position[axis]` to zero later.
2016-07-05 10:42:33 +02:00
Scott Lahteine
e48502866b
Merge pull request #3611 from alephobjects/M108_cancel_heatup
...
Introduce M108 cancel wait for heatup/cooldown of the hotend and bed
2016-07-04 01:19:31 -07:00
Scott Lahteine
d70197f514
Merge pull request #4204 from thinkyhead/rc_fix_gcode_t_position
...
Additional patches for gcode_T position change
2016-07-04 01:16:22 -07:00
Scott Lahteine
869b517589
Merge pull request #4205 from thinkyhead/rc_fixup_unit_references
...
References to millimeters in code comments need an update
2016-07-04 01:15:34 -07:00
Scott Lahteine
e104b91ea6
References to millimeters in code comments need an update
2016-07-03 20:13:29 -07:00
AnHardt
ff91d28a3a
Remove wants_to_cool warning
...
Remove wants_to_cool warning
2016-07-04 03:12:11 +02:00
Scott Lahteine
c9e536cf87
Additional patches for gcode_T position change
2016-07-03 18:11:02 -07:00
Scott Lahteine
60865fc45b
Merge pull request #4202 from thinkyhead/rc_fix_gcode_t_position
...
Fix position adjustment with gcode_T and MBL
2016-07-03 17:55:43 -07:00
Scott Lahteine
f841038313
Merge pull request #4201 from thinkyhead/rc_info_fit
...
Shorter labels for Print Stats info
2016-07-03 17:47:00 -07:00
Scott Lahteine
f31af61ee2
Fix position adjustment with gcode_T and MBL
2016-07-03 17:44:04 -07:00
Scott Lahteine
a8f5c2bf96
Merge pull request #4192 from birkett/k8400
...
Add Velleman K8400 board support.
2016-07-03 17:41:13 -07:00
Scott Lahteine
ef8980bfa0
Shorter labels for Print Stats info
2016-07-03 16:00:24 -07:00
Scott Lahteine
2ed625dafa
Fix compiler warnings for static screens
2016-07-03 15:26:17 -07:00
Anthony Birkett
e77844594d
readme.md -> README.md
2016-07-03 22:15:24 +01:00
Anthony Birkett
a0b00d29e3
Add a ported example configuration for the Velleman K8400 (Vertex) printer.
...
Supports both dual and single head printers (with the correct config).
Includes community sourced feed rate fix.
Rename / move files.
Remove redundant definitions.
2016-07-03 22:09:08 +01:00
lrpirlet
9b42c6b44b
apply correction when swtiching from MBL to physical in G28 X
2016-07-03 21:43:42 +02:00
Andrea Cimbalo
46196e9ee5
Add working PlatformIO support
2016-07-03 15:33:24 +02:00
esenapaj
95347fc650
Follow-up the PR #3662 (Rewritten FILAMENT_CHANGE_ENABLE feature)
...
・Update a forgotten Configuration_adv.h of Cartesio
2016-07-03 09:04:29 +09:00
Scott Lahteine
a06c5165a7
Shorter strings for smaller LCDs
2016-07-02 15:47:16 -07:00
Scott Lahteine
982f10e6a0
Use STATIC_ITEM for LCD message display
2016-07-02 15:47:15 -07:00
Petr Zahradnik
43ff0ce35f
Rewritten FILAMENT_CHANGE_ENABLE feature
2016-07-02 15:34:33 -07:00
Scott Lahteine
51b7820686
Patch up About Printer sub-menus
2016-07-02 15:22:34 -07:00
Scott Lahteine
439e78147d
Static menu items take an optional string, LJ by default
2016-07-02 15:22:34 -07:00
Scott Lahteine
fa9b2a925d
Tweak spacing in printcounter.cpp
2016-07-02 15:22:33 -07:00
Scott Lahteine
dbfc87cdcf
Squish sanity check for build info
2016-07-02 15:22:33 -07:00
Anthony Birkett
7a377c1d75
Add "About Printer" information menu.
...
Includes:
*firmware version / branch / date.
*extruder count
*board information (name, serial details, power supply type)
*thermistors (names, min/max temperatures)
*printer statistics (PRINTCOUNTER details)
Thanks to @thinkyhead for contributions.
2016-07-02 15:22:26 -07:00
Scott Lahteine
77a923d8ce
Merge pull request #4186 from thinkyhead/rc_array_macros
...
Simplified variable-size array macros
2016-07-01 20:48:12 -07:00
Scott Lahteine
e650a75b88
Simplified variable-size array macros
2016-07-01 20:36:05 -07:00
Scott Lahteine
ac4f235912
Merge pull request #4167 from thinkyhead/rc_eeprom_checksum
...
EEPROM Checksum
2016-07-01 19:22:49 -07:00
esenapaj
03b8f88092
Tab to Space
2016-07-02 08:07:33 +09:00
AnHardt
cb1b31f69b
Unconditional do_probe_raise() in probe_pt()
...
If Z_RAISE_BETWEEN_PROBINGS is null or undefined the probe is currently not raised by home_offset[Z_AXIS] and zprobe_zoffset.
But when different from 0 is.
If an undefined Z_RAISE_BETWEEN_PROBINGS expands to 0 (and it does) this is the solution.
A similar asymmetry exists with the newly introduced 'short-cut' in G28 - but its the rise before anything is probed - so should not make a difference.
2016-07-01 15:28:41 +02:00
Scott Lahteine
7ef7843fd4
Merge pull request #4181 from thinkyhead/rc_rename_a_move_func
...
Do interpolated moves for Allen Key deploy/stow
2016-06-30 16:30:09 -07:00
Scott Lahteine
6b2a7b30af
Extra comments to clarify EEPROM code
2016-06-30 16:28:01 -07:00
Scott Lahteine
787f394676
MAX_EXTRUDERS replaces mysterious "4"
2016-06-30 16:27:37 -07:00
Scott Lahteine
bc3748b7bc
Add shared Config_Postprocess for Read and Reset
2016-06-30 16:25:29 -07:00
Scott Lahteine
adcd0f5de3
Some formatting in configuration_store.cpp
2016-06-30 16:25:29 -07:00
Scott Lahteine
5e370006fc
EEPROM Checksum
2016-06-30 16:20:25 -07:00
Scott Lahteine
725fde8b26
Merge pull request #4169 from thinkyhead/rc_wait_but_break
...
Allow wait-for-cooling, break at threshold or if cooling stalls
2016-06-30 16:13:51 -07:00
Scott Lahteine
da6b0dab5f
Use prepare_move_to_destination for Allen Key deploy/stow
2016-06-30 16:09:43 -07:00
Scott Lahteine
c42f8fb8dd
Rename some movement sub-functions
2016-06-30 15:50:00 -07:00
Scott Lahteine
b6b3a4afbf
Merge pull request #4168 from thinkyhead/rc_viki2_for_ramps
...
Support for VIKI2 in RAMPS and derivatives
2016-06-30 01:48:50 -07:00
Scott Lahteine
f84d85f761
Cleanup extruder runout configs
2016-06-30 01:40:41 -07:00
Scott Lahteine
5e14a528dd
Always wait for cooling in M109/M190, break at low temp or if cooling stalls
2016-06-29 14:07:54 -07:00
Scott Lahteine
0b0b7aac6e
Support for VIKI2 in RAMPS and derivatives
2016-06-28 18:19:18 -07:00
Scott Lahteine
abda4ab427
Clean up CNControls pins
2016-06-28 16:56:48 -07:00
Scott Lahteine
683975cf90
Fix spelling in a config comment
2016-06-28 16:49:13 -07:00
Scott Lahteine
8268c0a9a0
Always define temp sensor, heater pins for RUMBA
2016-06-28 16:28:05 -07:00
Scott Lahteine
db19959735
Merge pull request #4161 from thinkyhead/rc_general_cleanup
...
Reduce storage requirements for strings, make some PGM
2016-06-27 20:46:26 -07:00
Scott Lahteine
2e96276bf4
More debug message cleanup
2016-06-27 20:36:19 -07:00
Scott Lahteine
dc2c0e5e24
Simpler debug output for deploy/stow
2016-06-27 20:36:18 -07:00
Scott Lahteine
bd491818d6
Reduce storage requirements for strings, make some PGM
2016-06-27 20:36:18 -07:00
Scott Lahteine
ee876dcd7a
Merge pull request #4159 from thinkyhead/rc_rigidbot_diff
...
Rigidbot V2 support - has MCP4728 digipot
2016-06-27 20:35:22 -07:00
Scott Lahteine
0c24e0e445
Support for newer Wire library
2016-06-27 20:25:03 -07:00
Scott Lahteine
ddb386c139
Init DAC_DISABLE_PIN in dac_init
2016-06-27 20:25:03 -07:00
AnHardt
e480ee0054
Further cleanup of G28 for probes
2016-06-27 20:19:51 -07:00
AnHardt
39883d03fc
universalize axis_unhomed_error()
2016-06-27 20:19:51 -07:00
AnHardt
e616093d4c
Simplify dock_sled()
...
`dock_sled()` is never called with offset parameter - remove it.
We move x only - so only that needs to be homed. Consequence is - we can home to z-min now with a sled probe!
Feedrates are set and restored in `do_blocking_move()`.
We already checked if the probe is deployed/stowed in deploy/stow_probe.
```
if (z_loc < _Z_RAISE_PROBE_DEPLOY_STOW + 5) z_loc = _Z_RAISE_PROBE_DEPLOY_STOW;
```
makes no sense - remove.
Now the raise is the same for deploy/stow -> move before the if.
Replace the if with a ternary.
Instead writing LOW/HIGH use the boolean `stow` we already have.
There is no reason for not using the sled probe in G29/M48 with 'E'.
It takes a while but works. (tested!)
2016-06-27 20:19:51 -07:00
Scott Lahteine
6c60869409
Support DAC_OR_ADDRESS in Printrboard too
2016-06-27 12:36:21 -07:00
Scott Lahteine
593c8bf286
Support for Rigidbot V2
2016-06-27 12:35:20 -07:00
Scott Lahteine
511503ede9
CARTESIO_UI has lcd contrast
2016-06-27 12:04:49 -07:00
Scott Lahteine
829c92f1ba
Use Z_RAISE_BETWEEN_PROBINGS with MBL
2016-06-26 15:39:11 -07:00
Scott Lahteine
eb1755208f
Merge pull request #4153 from thinkyhead/rc_probe_raise_options
...
Combine Z raise before/after options
2016-06-26 15:30:08 -07:00
Scott Lahteine
10da7ac86c
Combine Z raise before/after options
2016-06-26 13:56:30 -07:00
Scott Lahteine
9caa8941e2
Merge pull request #4149 from thinkyhead/rc_minimum_raise_in_probe_pt
...
Ensure a minimum height before XY move in probe_pt
2016-06-25 19:35:58 -07:00
Scott Lahteine
3fa631130f
Ensure a minimum height before XY move in probe_pt
2016-06-25 19:19:31 -07:00
Scott Lahteine
a7684eef7a
Squish code in ST7920
2016-06-25 18:35:15 -07:00
AnHardt
b4076883cc
Set testet delays for K8200, RAMBO, MINIRAMBO and ST7920
2016-06-25 18:35:15 -07:00
AnHardt
4454d80276
Decrease the needed nops to 1
...
by shitfing the left shift into the high phase.
```
2 cbi 0x2,1 ;set CLK //
1 in r18,__SREG__ //1
1-3 sbrc r24,7 //2-4
2 rjmp .L19 //4
1 cli .L19: //5
2 lds r25,258 lds r25,258 //7
1 andi r25,lo8(-2) ori r25,lo8(1) //8
2 sts 258,r25 sts 258,r25 //10
1 out __SREG__,r18 out __SREG__,r18 //11
2 .L3: rjmp .L3 //13 //2
2 sbi 0x2,1 ;reset CLK // //13-15 //2-4
1 lsl r24 ; val //1
1 nop //2
2 cbi 0x2,1 ;set CLK //4
...
```
2016-06-25 18:35:15 -07:00
AnHardt
56c42b572c
3 ms speedup for ST7920 and delay for BOARD_3DRAG
...
and saving ~1k memory
by limiting the `#pragma GCC optimize (3)` optimisation to `ultralcd_st7920_u8glib_rrd.h`. These optimisation was and is not done for all the other displays, is the reason for the big additionally use of memory, because the complete 'ultralcd.cpp' and 'dogm_lcd_implementation.h' was optimised (sadly i did not observe a change in speed).
Unrolling the loop in `ST7920_SWSPI_SND_8BIT()`, what i expected the optimiser to do, by hand, saved some speed by eliminating the loop variable (i) compares and increases. Every CPU cycle in this loop costs at least 0.5ms per display update because it's executed more than 1k times/s.
The delays are now pre-filled with the calculated values for 4.5V driven ST7920.
A way to simply add __your__ timing into the configuration was made.
At 4.5V
1.) The CLK signal needs to be at least 200ns high and 200ns low.
2.) The DAT pin needs to be set at least 40ns before CLK goes high and must stay at this value until 40ns after CLK went high.
A nop takes one processor cycle.
For 16MHz one nop lasts 62.5ns.
For 20MHz one not lasts 50ns.
To fulfill condition 1.) we need 200/62.5 = 3.2 => 4 cycles (200/50 = 4 => 4). For the low phase, setting the pin takes much longer. For the high phase we (theoretically) have to throw in 2 nops, because changing the CLK takes only 2 cycles.
Condition 2.) is always fulfilled because the processor needs two cycles (100 - 125ns) for switching the CLK pin.
Needs tests and feedback.
Especially i cant test 20MHz, 3DRAG and displays supplied wit less than 5V.
Are the delays right? Please experiment with longer or shorter delays. And give feedback.
Already tested are 5 displays with 4.9V - 5.1V at 16MHz where no delays are needed.
2016-06-25 18:35:15 -07:00
Scott Lahteine
ca184d3d72
Merge pull request #4147 from thinkyhead/rc_fix_M48_raise
...
Fix debug output in probe_pt
2016-06-25 18:15:33 -07:00
Scott Lahteine
b4161cbd98
Fix debug output in probe_pt
2016-06-25 17:59:03 -07:00
Edward Patel
da88b00585
MBL: Add support for max z endstop
...
See https://github.com/MarlinFirmware/Marlin/issues/4088
2016-06-25 21:58:02 +02:00
Scott Lahteine
74878d1f16
Always do a brief delay in lcd_quick_feedback
2016-06-24 14:46:10 -07:00
Scott Lahteine
7de7552069
Merge pull request #4133 from MagoKimbra/Single_home_axis_delta
...
Single home Axis Delta need simple sync_plan_position
2016-06-23 21:14:22 -07:00
Scott Lahteine
15a6b49f37
Simplified probe_pt (in G30)
2016-06-23 20:25:46 -07:00
Scott Lahteine
6a7045b9bf
Remove clean_up_after_endstop_move
2016-06-23 20:23:19 -07:00
Scott Lahteine
2a4f866561
Simplified probe_pt (in G29)
2016-06-23 20:22:28 -07:00
Scott Lahteine
89a2aa026b
Simplified probe_pt (in M48)
2016-06-23 19:22:45 -07:00
Scott Lahteine
f8530c5d1f
Simplified probe_pt function (G28 grid)
2016-06-23 19:09:32 -07:00
Scott Lahteine
c376c08042
Simplified probe_pt function (part 1)
2016-06-23 19:00:29 -07:00
Scott Lahteine
9a71b7f8ad
Fix debug message for 3-point leveling
2016-06-23 18:17:31 -07:00
Scott Lahteine
550c03a5a9
Drop raise_z_after_probing function
2016-06-23 18:11:54 -07:00
Scott Lahteine
bb38c816af
Always raise in deploy_z_probe / stow_z_probe
2016-06-23 18:00:20 -07:00
Scott Lahteine
68f3350050
Cleanup M401 / M402
2016-06-23 17:04:41 -07:00
Scott Lahteine
3afda99adf
Regular handlers for G31 / G32
2016-06-23 17:04:13 -07:00
Scott Lahteine
6803c8e37e
Move Z up before, or down after XY, for "blocking move"
2016-06-23 15:50:13 -07:00
Scott Lahteine
03c70c1990
SERVO_DEACTIVATION_DELAY => SERVO_DELAY
2016-06-23 14:33:29 -07:00
MagoKimbra
570f3bbc07
Single home Axis Delta need simple sync_plan_position
2016-06-23 23:09:47 +02:00
Scott Lahteine
61f34eec03
Merge pull request #4125 from jbrazio/bugfix/planner-warning
...
Fixes some compiler warnings
2016-06-22 19:34:37 -07:00
Scott Lahteine
bdcd628896
Merge pull request #4126 from thinkyhead/rc_lin_timing_patch
...
Patch LIN_ADVANCE timing issue
2016-06-22 19:24:44 -07:00
João Brázio
664232140d
Fixes somes compiler warnings
2016-06-23 03:12:55 +01:00
Sebastianv650
0c5192b288
Patch LIN_ADVANCE timing issue
...
Also the extruder stepper ISR has to keep an eye on step_loops count.
2016-06-22 19:05:14 -07:00
Scott Lahteine
d4134e6901
Define Z_SAFE_HOMING point when Z_PROBE_SLED is activated alone
2016-06-22 17:51:32 -07:00
Scott Lahteine
7b2fadd598
Apply some fixes from Andreas
...
Derived from
https://github.com/AnHardt/Marlin/commit/6e8ede8c694fa4d9e3c769840b09d56
7f8d8e0dd
2016-06-22 17:35:59 -07:00
Scott Lahteine
bd01592816
Goodbye MECHANICAL_PROBE
2016-06-22 17:13:33 -07:00
Scott Lahteine
2640d13a9f
Simplify initial raise in M48
2016-06-22 16:53:04 -07:00
Scott Lahteine
3763d45656
Return Z position in run_z_probe
2016-06-22 16:52:32 -07:00
Scott Lahteine
1f48b5c30f
Pass a raise to probe_pt, not a Z position
2016-06-22 16:40:21 -07:00
Scott Lahteine
6fdd5ba246
Save and restore feedrate in more places
2016-06-22 16:40:20 -07:00
Scott Lahteine
fe173c2bc6
Generalized probe raise, use for after probing
2016-06-22 14:44:30 -07:00
Scott Lahteine
7da3080761
Simpler cleanup in G28 / G29
2016-06-22 14:44:30 -07:00
Scott Lahteine
15229d988b
Fix compile error for bed matrix in M48
2016-06-22 14:04:46 -07:00
Scott Lahteine
c01352cbd5
Add a dependency for z servo macros
2016-06-22 14:04:23 -07:00
Scott Lahteine
c3794bd695
Add HAS_PROBING_PROCEDURE conditional
2016-06-22 14:03:22 -07:00
Scott Lahteine
42ce60c5cc
Make sure NUM_SERVOS is set for Z servo endstop
2016-06-22 14:01:19 -07:00
Scott Lahteine
b590a7dee0
Make Z_RAISE_BETWEEN_PROBINGS a more general option
2016-06-22 14:00:44 -07:00
Scott Lahteine
bb9c67b4b5
Tweak some feedrate vars
2016-06-22 03:27:31 -07:00
Scott Lahteine
5158bd6e93
Screen out G29 E for sled and allen key, allow single probe
2016-06-22 03:20:33 -07:00
Scott Lahteine
ccae92588d
Cleanup debug in G28 and G29
2016-06-22 03:20:33 -07:00
Scott Lahteine
b4a9d2366c
Use a macro for kinematic sync_plan_position
2016-06-22 03:20:33 -07:00
Scott Lahteine
bfccf26294
Use sync_plan_position_delta where needed
2016-06-22 03:20:33 -07:00
Scott Lahteine
a6b8c67df4
Move probe deploy after setup call in G29
2016-06-22 03:20:33 -07:00
Scott Lahteine
e69916d1bd
Split up endstop_move functions
2016-06-22 03:20:33 -07:00
Scott Lahteine
0e18a4897b
Simpler handling of sled/allen-key in probe_pt
2016-06-22 03:20:33 -07:00
Scott Lahteine
1a92e2ef18
Comment on run_z_probe
2016-06-22 03:20:33 -07:00
Scott Lahteine
68e0e5855e
For all probes, at the end of G29 simply raise and stow
2016-06-22 03:20:33 -07:00
Scott Lahteine
c3023f8cc5
Make M401/M402 available with HAS_BED_PROBE
2016-06-22 03:20:33 -07:00
Scott Lahteine
9f0c255c69
Show uncorrected position in set_bed_level_equation_3pts
2016-06-22 03:20:33 -07:00
Scott Lahteine
07298ac992
Initialize current_position to home_offset on boot
2016-06-22 03:20:33 -07:00
Scott Lahteine
d50539583a
Make XY_PROBE_SPEED a general probe option
2016-06-22 03:04:47 -07:00
Scott Lahteine
2798499b71
XY_TRAVEL_SPEED => XY_PROBE_SPEED
2016-06-22 02:45:25 -07:00
Scott Lahteine
88dc543584
Add a macro for XY_TRAVEL_FEEDRATE
2016-06-22 02:23:50 -07:00
Scott Lahteine
117db77c55
make motor_current_setting static and constexpr
2016-06-21 19:50:08 -07:00
João Brázio
19fb04d761
Update bq Hephestos 2 config
2016-06-21 18:15:51 -07:00
Scott Lahteine
b0e47608e6
Merge pull request #4108 from esenapaj/Fix-for-PR-#4093
...
Fix for PR #4093 (Make Z Probe options independent of ABL), etc
2016-06-21 18:12:08 -07:00
Scott Lahteine
c84732e605
Merge pull request #4111 from esenapaj/Cosmetic-changes-and-small-fix-for-thermistortables.h
...
Cosmetic changes and small fix for thermistortables.h
2016-06-21 18:05:32 -07:00
Scott Lahteine
cdc661ea5e
Merge pull request #4110 from esenapaj/Small-cosmetic-changes-for-language-files
...
Small cosmetic changes for language files
2016-06-21 18:04:12 -07:00
Scott Lahteine
c8186e9423
Merge pull request #4109 from esenapaj/Enclose-#error-string-by-double-quotes
...
Enclose #error string by double-quotes
2016-06-21 18:03:30 -07:00
Scott Lahteine
40cd20a236
Fix comments on EXPERIMENTAL_I2CBUS
2016-06-21 17:58:44 -07:00
esenapaj
385945ca31
Cosmetic changes and small fix for thermistortables.h
...
・Adjust spacing
・Standardize comments position
・Remove ',' at the tail of array
2016-06-21 21:19:47 +09:00
esenapaj
fac58f0291
Cosmetic changes for language files
2016-06-21 21:13:25 +09:00
esenapaj
14b661b9e5
Enclose #error string by double-quotes
2016-06-21 21:06:14 +09:00
esenapaj
d583ea852d
Standardize format description of Panel
2016-06-21 20:51:27 +09:00
esenapaj
aa6d35bd49
Move code block of probe to appropriate position
2016-06-21 20:36:46 +09:00
esenapaj
740fb2ce39
Adjust spacing
2016-06-21 19:37:45 +09:00
esenapaj
f77f3ffa70
Remove duplicated Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX
2016-06-21 19:33:45 +09:00
Scott Lahteine
19fe93a5a9
Clean up configs for Z_MIN_PROBE_REPEATABILITY_TEST
2016-06-21 03:10:46 -07:00
Scott Lahteine
71a7408012
Merge pull request #4106 from thinkyhead/rc_temp_compile_err
...
Fix compile error with watch_bed_next_ms
2016-06-21 02:48:46 -07:00
Scott Lahteine
dcb8ec32ee
Fix compile error with watch_bed_next_ms
2016-06-21 02:13:41 -07:00
Scott Lahteine
3996242e9d
Allow Z_MIN_PROBE_REPEATABILITY_TEST solo
2016-06-21 01:56:40 -07:00
Scott Lahteine
26a9cd0b08
Move run_z_probe to earlier block
2016-06-21 01:25:23 -07:00
Scott Lahteine
7f8a2025af
Move raise_z_after_probing into earlier block
2016-06-21 01:03:40 -07:00
Scott Lahteine
2530371516
Always disable probe at the end of G29
2016-06-20 16:40:44 -07:00
Scott Lahteine
6aba98e470
Comment on setup_for_endstop_move
2016-06-20 16:40:44 -07:00
Scott Lahteine
04e88d008e
Clear up ordering in G30
2016-06-20 16:40:44 -07:00
Scott Lahteine
ed75b0ea11
Make clean_up function available for probes
2016-06-20 16:28:45 -07:00
Scott Lahteine
51d52cb52a
Make run_z_probe available for any bed probe
2016-06-20 16:02:36 -07:00
Scott Lahteine
f6b09cf465
Always use deploy/stow for dock_sled
2016-06-20 15:51:01 -07:00
Scott Lahteine
3b457c2dd3
Use deploy/stow with FIX_MOUNTED_PROBE too
2016-06-20 15:25:01 -07:00
Scott Lahteine
7e9d4a68d4
Always raise Z (if needed) for servo deploy/stow
2016-06-19 20:17:13 -07:00
Scott Lahteine
9beb3f2f5e
Merge pull request #4097 from thinkyhead/rc_fil_runout_cleanup
...
FIL_RUNOUT_INVERTING false by default
2016-06-19 19:46:14 -07:00
Scott Lahteine
f215b30932
Merge pull request #4093 from thinkyhead/rc_probe_without_abl
...
Make Z Probe options independent of ABL
2016-06-19 19:44:25 -07:00
Scott Lahteine
2fd2301928
FILRUNOUT => FIL_RUNOUT
2016-06-19 19:25:26 -07:00
Scott Lahteine
dfbf8b3c2c
FIL_RUNOUT_INVERTING false by default
2016-06-19 19:25:26 -07:00
Scott Lahteine
7b5cd314a5
Merge pull request #4095 from thinkyhead/rc_fil_runout_cleanup
...
Improve FILAMENT_RUNOUT_SENSOR, FILRUNOUT_PIN
2016-06-19 18:48:18 -07:00
Scott Lahteine
de12228758
Make Z Probe options independent of ABL
2016-06-19 18:47:27 -07:00
Scott Lahteine
add0032820
Improve FILAMENT_RUNOUT_SENSOR, FILRUNOUT_PIN
2016-06-19 18:13:33 -07:00
Scott Lahteine
f8c278ce4d
Cartesio UI display option in all configs
2016-06-19 17:39:46 -07:00
Scott Lahteine
400e13d136
Output a message for SD read errors
2016-06-19 17:14:56 -07:00
Roxy-3D
96b8bcca84
Merge pull request #4081 from thinkyhead/rc_tweaky_m48_tweaks
...
Cleanup of M48
2016-06-18 22:21:16 -05:00
Scott Lahteine
b7e3c1bbc4
Tweak M48 output conditions
2016-06-18 16:17:53 -07:00
Scott Lahteine
1dad912b03
Adjust M48 raise / move handling
2016-06-18 15:38:24 -07:00
Scott Lahteine
46d3ef2223
Simplify sample_set probe_pt call in M48
2016-06-18 15:38:23 -07:00
Scott Lahteine
a647b05f82
Shrink some debug code in G28
2016-06-18 15:38:23 -07:00
Scott Lahteine
4edf813bde
Just-in-time declaration style in M48
2016-06-18 15:38:23 -07:00
Juan Ricardo Gomez Anaya
c475291e19
Fix M851
...
Minor change missing in the process of standardize the gcode M851
2016-06-18 15:19:07 -07:00
Scott Lahteine
e35583888c
Merge pull request #4082 from esenapaj/Follow-up-the-PR-#4065
...
Follow-up the PR #4065 (Remove support for XY servo endstops)
2016-06-18 03:31:12 -07:00
Scott Lahteine
6dff52d920
Merge pull request #4078 from RicardoGA/Language_Spanish
...
Update Spanish Language
2016-06-18 03:28:46 -07:00
esenapaj
d55b94d606
Follow-up the PR #4065 (Remove support for XY servo endstops)
...
・Update a forgotten Configuration.h of Cartesio
2016-06-18 18:01:58 +09:00
Scott Lahteine
4e860babbc
Allow setting xy_travel_speed for delta leveling also
2016-06-18 01:40:49 -07:00
Scott Lahteine
d36d4edd80
Tweak partial homing code
2016-06-18 01:16:50 -07:00
Scott Lahteine
d3a05de96e
Save and restore feedrate in probe functions
2016-06-18 01:16:26 -07:00
Juan Ricardo Gomez Anaya
5991eb428f
Update Spanish Language
...
Spanish language update and also add missing messages
2016-06-18 00:27:04 -05:00
Scott Lahteine
f33bd0bb10
Merge pull request #4077 from thinkyhead/rc_delete_old_macros
...
Delete some obsolete Z servo macros
2016-06-17 18:59:16 -07:00
Scott Lahteine
defcacc1a9
Delete some obsolete Z servo macros
2016-06-17 18:49:17 -07:00
Scott Lahteine
bbf5b486c3
Add an SD Card stop function, use in ultralcd
2016-06-17 18:27:14 -07:00
Scott Lahteine
3a150f07c2
Merge pull request #4073 from thinkyhead/rc_temp_mystery
...
Minor tweaks to M109 / M190
2016-06-17 17:49:50 -07:00
Scott Lahteine
bd4ec727e7
Merge pull request #4066 from thinkyhead/rc_M851_with_probe
...
Make M851 standard with a bed probe
2016-06-17 17:32:55 -07:00
Scott Lahteine
692a6e7c91
Merge pull request #4065 from thinkyhead/rc_goodbye_xy_servos
...
Remove support for XY servo endstops
2016-06-17 17:32:08 -07:00
Scott Lahteine
de177ba6c9
Minor tweaks to M109 / M190
2016-06-17 17:26:21 -07:00
Scott Lahteine
eab44b30d4
Safety and serial sections
2016-06-17 15:19:43 -07:00
Scott Lahteine
fc56a547d1
Rename movement section to motion
2016-06-17 15:19:43 -07:00
Scott Lahteine
a8b8796cd7
Define probe offsets when a probe exists
2016-06-17 15:19:42 -07:00
Scott Lahteine
1000563d80
Make M851 standard with a bed probe
2016-06-17 15:19:42 -07:00
Scott Lahteine
f66a194159
Merge pull request #4062 from jbrazio/bugfix/compiler-warnings
...
Fixes misc gcc warnings
2016-06-17 14:23:28 -07:00
Scott Lahteine
1bed392c68
HAS_Z_ENDSTOP_SERVO => HAS_Z_SERVO_ENDSTOP
2016-06-17 14:20:17 -07:00
Scott Lahteine
47ce810f52
Remove support for XY servo endstops
2016-06-17 14:19:17 -07:00
João Brázio
d1e5dc6319
Fixes misc gcc warnings
2016-06-17 20:24:24 +01:00
esenapaj
c5eecb11b2
Follow-up the PR #4055 (Croatian language support)
...
・Update a forgotten Configuration.h of Cartesio
2016-06-17 21:20:15 +09:00
Scott Lahteine
d991a4c24a
Merge pull request #4063 from thinkyhead/rc_remove_swp_files
...
Delete mysterious .swp files from #3609
2016-06-16 17:22:48 -07:00
Scott Lahteine
8d8cbef1de
Merge pull request #4055 from thinkyhead/rc_croatian_language
...
Croatian language support
2016-06-16 17:22:25 -07:00
Scott Lahteine
ebbed2975e
Delete mysterious .swp files from #3609
2016-06-16 16:42:03 -07:00
Scott Lahteine
02e5dad29a
Include Croatian in language listings
2016-06-16 16:18:26 -07:00
Scott Lahteine
2015aad867
Tweak Croatian language file heading
2016-06-16 16:09:57 -07:00
Robert Marko
884bc63fbe
Add Croatian language
2016-06-16 16:09:57 -07:00
Scott Lahteine
ef3bef6b9e
Fix feedrate in gcode_T (max_feedrate is mm/s)
2016-06-16 16:03:14 -07:00
Scott Lahteine
4640974e1b
Merge pull request #4060 from esenapaj/Follow-up-the-PR-#4053
...
Follow-up and improvement the PR #4053 (CNControls Cartesio UI Support)
2016-06-16 15:44:00 -07:00
esenapaj
106227540e
Follow-up and improvement the PR #4053 (CNControls Cartesio UI Support)
...
・Add implimantation of PR #3609 to configuration files of Cartesio
・Standardize macro names
2016-06-16 19:22:31 +09:00
MagoKimbra
008d0637dd
Fix gcode_T
2016-06-16 09:05:36 +02:00
edwilliams16
114d9db7d0
Show babysteps on the LCD in mm, not steps
2016-06-15 23:03:24 -07:00
Scott Lahteine
b410bf933b
Merge pull request #4053 from thinkyhead/rc_cartesio_redo
...
CNControls Cartesio UI Support
2016-06-15 22:33:45 -07:00
Scott Lahteine
f639044c24
Merge pull request #3609 from jbrazio/feature/config-version
...
Adds versioning for Configuration.h & Configuration_adv.h
2016-06-15 22:09:47 -07:00
Scott Lahteine
4d2cb70152
Cartesio UI Support
2016-06-15 21:46:54 -07:00
Scott Lahteine
da90bbe0eb
Merge pull request #4010 from thinkyhead/rc_toolchange_adjust
...
Fixup position adjustment on toolchange
2016-06-15 21:10:33 -07:00
Scott Lahteine
948c467e16
Merge pull request #4043 from AnHardt/save_delay
...
Introduce save_delay()
2016-06-15 21:06:43 -07:00
Scott Lahteine
4b93989a77
MBL Z adjustment on toolchange
2016-06-15 20:49:36 -07:00
Scott Lahteine
9c800d1f8c
Position adjustment for bed leveling
2016-06-15 20:49:36 -07:00
Scott Lahteine
8c7babb70f
Merge pull request #4049 from esenapaj/Fix-for-the-PR-#4023
...
Fix for the PR #4023(Add macros to move servos)
2016-06-15 20:39:46 -07:00
AnHardt
1219310622
Introduce save_delay()
...
Introduce save_delay() for long delays what otherwise would cause
watchdog resets
Explizit lcd_set_custom_characters(false) at the end of bootscreen().
Else the charset is not proper set in case of LCD_PROGRESS_BAR.
2016-06-15 18:11:55 +02:00
esenapaj
44f091a413
Fix for the PR #4023(Add macros to move servos)
...
・Add missing ')'
2016-06-15 22:34:55 +09:00
Alexander Leisentritt
c2b7ef1e7e
"e" was renamed to "eindex" in a previous commit
2016-06-15 11:11:16 +02:00
Scott Lahteine
52ac2a62ee
Merge pull request #4013 from thinkyhead/rc_toolchange_no_move
...
Use "Tn S1" to change tools without moving
2016-06-14 20:13:01 -07:00
Scott Lahteine
d2a00b74e3
Merge pull request #4004 from thinkyhead/rc_feedrate_in_gcode_T
...
Use linear feedrate in gcode_T, not volumetric
2016-06-14 20:10:08 -07:00
Scott Lahteine
0ad26d0de8
Merge pull request #4034 from AnHardt/custom-splash-screen
...
Custom Splash Screen
2016-06-14 18:51:39 -07:00
esenapaj
741cda0e47
Follow-up the PR #3676(Advance extrusion algorithm – LIN_ADVANCE)
...
・Update forgotten example configurations
2016-06-15 00:10:15 +09:00
AnHardt
02b3d6b8d3
Custom Splash Screen
...
Custom Splash Screen for full graphic displays.
Too complicated for the hitachis without knowing what exactly to display.
On top of #4032
Realisation of an idea from #3996
2016-06-14 09:39:28 +02:00
Scott Lahteine
78a48d7e3c
Merge pull request #4038 from thinkyhead/rc_fix_heater_off
...
Fix broken DISABLE_HEATER macro
2016-06-13 20:58:34 -07:00
Scott Lahteine
ee5be92206
Fix broken DISABLE_HEATER macro
2016-06-13 20:57:58 -07:00
Scott Lahteine
8d8180e028
Parse M905 args in Marlin_main.cpp
2016-06-13 19:25:28 -07:00
Scott Lahteine
2b340f5acb
patch LIN_ADVANCE to use code_value_float
2016-06-13 18:54:25 -07:00
Scott Lahteine
b708196770
Merge pull request #4032 from AnHardt/bootscreen-delay
...
Show bootscreen later
2016-06-13 18:27:05 -07:00
Scott Lahteine
587de1b6b6
Merge pull request #3676 from thinkyhead/rc_lin_advance_feature
...
Advance extrusion algorithm – LIN_ADVANCE
2016-06-13 18:04:58 -07:00
AnHardt
b4fedec0d1
Show bootscreen later
...
Init display and show bootscreen later, but init display in `kill()`
to init outputs before the bootscreen delays but being able to display
kill errors.
2016-06-14 01:59:50 +02:00
Silvio Didonna
08e2c5a6ea
Added and translated some strings from language_en
2016-06-13 13:04:09 +02:00
Scott Lahteine
4d2119f83a
_lcd_move => _lcd_move_xyz
2016-06-12 17:14:19 -07:00
Scott Lahteine
811967923a
Fix manual_move to move the correct E stepper
2016-06-12 17:14:19 -07:00
Scott Lahteine
0d0b751498
Merge pull request #4023 from thinkyhead/rc_servo_macros
...
Add macros to move servos
2016-06-12 15:45:39 -07:00
Scott Lahteine
4fbe818163
Add macros to move servos
2016-06-12 15:38:30 -07:00
Scott Lahteine
b322ac4417
No need to check ULTIPANEL with DOGLCD
2016-06-11 16:50:06 -07:00
João Brázio
8ccd97e7cc
Updated all example configuration files
2016-06-12 00:36:15 +01:00
Scott Lahteine
c7eeb09e8f
Merge pull request #4012 from Blue-Marlin/watchdoghealing
...
Heal the watchdog
2016-06-11 16:18:22 -07:00
Scott Lahteine
7fb69e24fb
Use "Tn S1" to change tools without moving
2016-06-11 15:58:45 -07:00
Scott Lahteine
2f1bf8373b
Merge pull request #4005 from thinkyhead/rc_prepare_move_destination
...
Clarify names of prepare_move functions
2016-06-11 15:51:58 -07:00
João Brázio
de8108648f
Added a versioning system to the config files
2016-06-11 23:48:10 +01:00
Blue-Marlin
efe719f898
Heal the watchgog
2016-06-12 00:34:31 +02:00
Scott Lahteine
b75e648f2c
Clarify names of prepare_move functions
2016-06-11 15:32:49 -07:00
Scott Lahteine
ae9b09fe94
menu => screen
2016-06-11 14:53:39 -07:00
Scott Lahteine
45ea8749d3
Wrap all items depending on ULTIPANEL
2016-06-11 14:27:34 -07:00
Scott Lahteine
0e2bfd0769
Use linear feedrate in gcode_T, not volumetric
2016-06-10 18:27:01 -07:00
Scott Lahteine
bf8710d522
Merge pull request #4001 from Blue-Marlin/manage_manual_move-ULTIPANEL
...
manage_manual_move(); -> ULTIPANEL
2016-06-10 17:17:57 -07:00
João Brázio
2c34ec2bac
Closes #3999 : Compilation error with BEEPER_PIN -1
2016-06-11 00:12:49 +01:00
Blue-Marlin
378ff92e98
manage_manual_move(); -> ULTIPANEL
...
Makr the call of `manage_manual_move() ` depandent of `ULTIPANEL`
2016-06-10 23:36:57 +02:00
Scott Lahteine
aad9c0ed8d
Apply updated ISR timing code
2016-06-09 21:03:27 -07:00
Scott Lahteine
506d78b2f8
Run the advance_isr faster instead of doing multiple e-steps per interrupt
2016-06-09 21:03:27 -07:00
Scott Lahteine
6d62a4ffc8
Patch LIN_ADVANCE for style and forward-compatibility
2016-06-09 21:03:27 -07:00
Sebastianv650
fb8e880734
Add LIN_ADVANCE
2016-06-09 21:03:27 -07:00
Scott Lahteine
e2d4919c01
Merge pull request #3991 from thinkyhead/rc_axis_units
...
Rename some vars to clarify their relationship to acceleration
2016-06-09 20:57:01 -07:00
Scott Lahteine
74060f17b7
Merge pull request #3995 from thinkyhead/rc_nonblocking_buzzer
...
New feature: Non blocking tone queue
2016-06-09 20:55:29 -07:00
Scott Lahteine
a82c755a35
Fix BQ_LCD_SMART_CONTROLLER pin compiler warnings
2016-06-09 20:38:23 -07:00
João Brázio
5b5aa1572b
Non-blocking buzzer
2016-06-09 20:20:05 -07:00
Scott Lahteine
72c6f2923f
axis_steps_per_unit => axis_steps_per_mm
2016-06-09 17:04:51 -07:00
Scott Lahteine
446515ab79
Adjust spacing in block_t
2016-06-09 17:04:51 -07:00
Scott Lahteine
80ab749563
Rename acceleration locals for clarity
2016-06-09 17:04:51 -07:00
Scott Lahteine
3b08eb1eeb
acceleration_st => acceleration_steps_per_s2
2016-06-09 17:04:51 -07:00
Scott Lahteine
cb4704e07a
Rename some planner acceleration vars
...
- `per_sq_second` => `per_s2`
- `per_sqr_second` => `per_s2`
- `axis_steps_per_sqr_second` => `max_acceleration_steps_per_s2`
2016-06-09 17:04:50 -07:00
Scott Lahteine
3c68be79dc
Throw an error in PID_autotune for E < -1
2016-06-09 16:41:53 -07:00
Scott Lahteine
26f8f54c56
Merge pull request #3985 from thinkyhead/rc_inch_fahrenheit_kelvin
...
Support inches, fahrenheit, and kelvin
2016-06-08 20:10:33 -07:00
Scott Lahteine
f0a5b7f0bc
Merge pull request #3986 from thinkyhead/rc_mbl_forward_iteration
...
Use memset in mbl.reset to save 58 bytes
2016-06-08 17:33:41 -07:00
Scott Lahteine
0b3142b45b
Remove redundant declarations from M100 code
2016-06-08 17:09:34 -07:00
Scott Lahteine
4980ecc1f7
Smaller binary using inline gcode argument getters
2016-06-08 17:03:28 -07:00
Reid Rankin
16212432c9
G20/21 and M149 support, and code_value() refactor
...
This is an update of MarlinDev PR #196 .
G20/21: support for switching input units between millimeters and
inches.
M149: support for changing input temperature units.
In support of these changes, code_value() and code_value_short() are
replaced with an array of functions which handle converting to the
proper types and/or units.
2016-06-08 16:51:10 -07:00
Scott Lahteine
a569e89775
Merge pull request #3978 from thinkyhead/rc_planner_local_rename
...
Rename some auto/locals to avoid name conflict
2016-06-08 16:41:57 -07:00
Scott Lahteine
2d55862499
Use memset in mbl.reset to save 58 bytes
2016-06-08 16:05:18 -07:00
Scott Lahteine
b23f710034
Cleanup and naming for num-to-string functions
2016-06-08 13:12:27 -07:00
Scott Lahteine
3d56b9d127
Merge pull request #3979 from thinkyhead/mbl_cell
...
MBL: cel => cell
2016-06-07 19:12:46 -07:00
Scott Lahteine
cca047424d
MBL: cel => cell
2016-06-07 19:10:39 -07:00
Scott Lahteine
49ecaf774d
Rename some auto/locals to avoid name conflict
2016-06-07 15:38:45 -07:00
petrzjunior
9171a3d94f
Update Czech language 2016/06/07
2016-06-07 19:25:15 +02:00
Scott Lahteine
5e6fdbb4cb
Merge pull request #3963 from thinkyhead/rc_advance_steppers
...
Use e_steps[EXTRUDERS] instead of e_steps[4]
2016-06-05 02:46:06 -07:00
Scott Lahteine
47b5c55c29
Implement the delayed-move technique
2016-06-05 02:29:49 -07:00
Scott Lahteine
a3e25a0fca
Instead of trying to move now, set a flag to move asap
2016-06-05 02:29:48 -07:00
Scott Lahteine
e2a8961635
Use e_steps[EXTRUDERS] instead of e_steps[4]
2016-06-05 01:44:53 -07:00
Scott Lahteine
43947072d5
Merge pull request #3895 from thinkyhead/rc_singlenozzle_part_2
...
SINGLENOZZLE: EXTRUDERS versus HOTENDS
2016-06-04 15:23:17 -07:00
Scott Lahteine
d7e4e8e9be
Fix a typo in #3955
2016-06-04 02:09:58 -07:00
Scott Lahteine
c2362c1b3c
Apply Marlin coding standards to MBL class
2016-06-03 21:43:32 -07:00
Edward Patel
c06de0f097
MBL: Added keeping MBL active when homing single axises for #3750
2016-06-03 21:42:29 -07:00
Scott Lahteine
f2fb66c00d
With SINGLENOZZLE only set temperature for the active tool
2016-06-03 17:38:03 -07:00
Scott Lahteine
cd441ce652
SINGLENOZZLE: EXTRUDERS versus HOTENDS
2016-06-03 17:38:03 -07:00
Scott Lahteine
32f8300cc6
Merge pull request #3944 from thinkyhead/rc_eboston_lcd_contrast
...
Improved LCD contrast handling
2016-06-03 17:08:41 -07:00
Scott Lahteine
9c87bf835c
Merge pull request #3947 from thinkyhead/rc_statics_stepper
...
Apply static to remaining Stepper methods
2016-06-03 17:08:15 -07:00
Scott Lahteine
08871d4d6e
Merge pull request #3950 from boelle/patch-3
...
last of missing defines added
2016-06-03 17:07:02 -07:00
Scott Lahteine
4e13cd3f35
Merge pull request #3955 from MagoKimbra/RCBugFix
...
Fix M428 width DELTA & SCARA
2016-06-03 15:50:37 -07:00
Scott Lahteine
2403a1cf9c
Merge pull request #3952 from rafacouto/RCBugFix
...
Galician language update.
2016-06-03 15:46:03 -07:00
Scott Lahteine
8529122af1
Merge pull request #3946 from thinkyhead/rc_g28_servo_raise_before_stow
...
Raise the servo probe before stow outside ABL context
2016-06-03 15:45:36 -07:00
MagoKimbra
f499be084a
Fix M428 width DELTA & SCARA
2016-06-03 23:23:23 +02:00
Rafa Couto
5f8db3f574
Galician language update.
2016-06-03 18:24:53 +02:00
Bo Herrmannsen
8532bf4087
last of missing defines added
...
need to check line 101-103
2016-06-03 11:20:46 +02:00
Scott Lahteine
81384dfd36
Apply static to remaining stepper methods
2016-06-02 18:00:31 -07:00
Scott Lahteine
664b299a51
This fix is not DELTA compatible
2016-06-02 17:16:19 -07:00
Scott Lahteine
064efb20e0
Also call clear_command_queue for lcd_sdcard_stop
2016-06-02 17:16:19 -07:00
Scott Lahteine
6277395e1e
set_current_position_from_planner() after stepper.quick_stop()
2016-06-02 17:16:19 -07:00
Scott Lahteine
381bc6f0b0
set_position => set_position_mm
2016-06-02 17:16:19 -07:00
Scott Lahteine
663d2463dc
Merge pull request #3922 from thinkyhead/rc_statics_stepper
...
Apply static to Stepper class
2016-06-02 17:14:24 -07:00
Scott Lahteine
194185539d
Merge pull request #3925 from thinkyhead/rc_statics_planner
...
Apply static to Planner class
2016-06-02 17:14:04 -07:00
Scott Lahteine
3fd9b331f0
Merge pull request #3924 from thinkyhead/rc_statics_temperature
...
Apply static to Temperature class
2016-06-02 17:13:17 -07:00
Scott Lahteine
db0fd021d0
Z raise options independent of ABL so G28 can use them
2016-06-02 16:56:49 -07:00
Scott Lahteine
9eecb4404b
Make raise_z_after_probing null sometimes
2016-06-02 16:56:49 -07:00
Scott Lahteine
28fb1f8994
Tweak #endif comment for ABL GRID
2016-06-02 16:56:49 -07:00
Scott Lahteine
b3a37b493d
Patch G28 servo stow to use Conditionals, raise_z_after_probing
2016-06-02 16:56:49 -07:00
Scott Lahteine
5390c846a5
Positive conditions for HAS_LCD_CONTRAST
2016-06-02 16:17:34 -07:00
Scott Lahteine
efa7209acf
Improved LCD contrast handling
...
Based on MarlinFirmware/MarlinDev#200 from @eboston
2016-06-02 16:17:34 -07:00
Scott Lahteine
b703fa9538
Add sanity check for SAV_3DGLCD display types
2016-06-02 15:21:17 -07:00
lrpirlet
3aefa04386
Raise the servo probe before stow outside ABL context
2016-06-01 21:53:45 +02:00
Scott Lahteine
9729e9c450
Combine ST7565 / U8GLIB_NHD_C12864 items in dogm
2016-06-01 01:42:14 -07:00
Scott Lahteine
f331763eca
Merge pull request #3829 from thinkyhead/rc_fix_T_command
...
Fix bad movement in gcode_T when switching extruders
2016-05-31 19:36:18 -07:00
Scott Lahteine
67f816ff79
Merge pull request #3926 from thinkyhead/rc_statics_endstops
...
Drop FORCE_INLINE from endstops.h
2016-05-31 19:35:41 -07:00
Scott Lahteine
2bd4f33369
Merge pull request #3928 from thinkyhead/rc_allen_key_cleanup
...
Remove excess allen key probe examples from configs
2016-05-31 19:18:21 -07:00
Scott Lahteine
d698c89971
Fix bad movement in gcode_T when switching
2016-05-31 19:14:33 -07:00
Scott Lahteine
1a01a44a94
Merge pull request #3936 from thinkyhead/rc_sav_mk1
...
Support for SAV_3DGLCD OLED LCD controller
2016-05-31 18:46:25 -07:00
Scott Lahteine
4770d7c346
Merge pull request #3933 from boelle/patch-2
...
added defines present in en but not in da
2016-05-31 18:42:38 -07:00
Scott Lahteine
c6c01eaaac
Merge pull request #3888 from thinkyhead/rc_slower_max31855
...
Slower SPI speed for MAX31855
2016-05-31 18:40:38 -07:00
Scott Lahteine
a0b000d752
Support for SAV_3DGLCD OLED LCD controller
2016-05-31 14:41:16 -07:00
Scott Lahteine
bd97bbc52a
Make HAS_LCD_CONTRAST a boolean flag
2016-05-31 11:47:02 -07:00
Scott Lahteine
bc77670673
Merge pull request #3929 from thinkyhead/rc_fix_printrboard_dac
...
Need to call dac_init() in setup() for DAC_STEPPER_CURRENT
2016-05-31 10:29:37 -07:00
Bo Herrmannsen
a1a8240606
added defines present in en but not in da
2016-05-31 14:57:52 +02:00
Bo Herrmannsen
5eb7a79d93
initial changes to DA
2016-05-31 14:24:33 +02:00
Scott Lahteine
55ef04a566
Need to call dac_init() in setup() for DAC_STEPPER_CURRENT
...
As reported by https://github.com/MarlinFirmware/Marlin/pull/3182#issuecomment-222595488
2016-05-30 23:35:06 -07:00
Scott Lahteine
43a71ef226
Remove excess allen key probe examples from configs
2016-05-30 18:26:53 -07:00
Scott Lahteine
1582ed43bf
Merge pull request #3918 from epatel/marlin/mbl_negative_xy_adv
...
MBL: Move border macros to Configuration_adv.h
2016-05-30 18:15:50 -07:00
Scott Lahteine
ff53819856
Drop FORCE_INLINE in planner.h
...
This change actually does increase the binary size by about 12 bytes,
but how does it affect performance?
2016-05-30 17:18:28 -07:00
Scott Lahteine
e60224a943
Drop FORCE_INLINE from endstops.h
...
`FORCE_INLINE` seems to have no effect with standard optimization.
2016-05-30 17:08:56 -07:00
Scott Lahteine
85512e9372
Drop FORCE_INLINE from temperature.h
...
`FORCE_INLINE` seems to have no effect on code generation with standard
optimization.
2016-05-30 17:06:50 -07:00
Scott Lahteine
78fb02a5ad
Apply static to Temperature class
2016-05-30 16:50:51 -07:00
Scott Lahteine
c3df293fc6
Merge pull request #3923 from thinkyhead/rc_statics_endstops
...
Apply static to Endstops class
2016-05-30 16:48:23 -07:00
Scott Lahteine
02735fd500
Merge pull request #3921 from thinkyhead/rc_calc_timer_tweak
...
Tiny calc_timer speedup
2016-05-30 16:47:03 -07:00
Scott Lahteine
668d50f68e
Keep Stepper encapsulation, use static data and methods
2016-05-30 16:24:04 -07:00
Scott Lahteine
26f866b908
Apply static to Endstops class
2016-05-30 16:23:43 -07:00
Scott Lahteine
470d5ac09f
Apply static to Planner class
2016-05-30 16:22:41 -07:00
Scott Lahteine
ecfdcf7250
Tiny calc_timer speedup
2016-05-30 16:17:02 -07:00
Edward Patel
06593833ff
MBL: Move border macros to Configuration_adv.h
2016-05-30 20:50:16 +02:00
Scott Lahteine
ffe55c230d
Merge pull request #3914 from thinkyhead/rc_fix_lcd_contrast
...
Patch conditionals for DEFAULT_LCD_CONTRAST, MINIPANEL
2016-05-30 11:20:14 -07:00
Scott Lahteine
d3efc96289
Patch conditionals for DEFAULT_LCD_CONTRAST, MINIPANEL
...
- `DEFAULT_LCD_CONTRAST` was incorrectly overriding all `DOGLCD`
- `MINIPANEL` conditionals are identical to `MAKRPANEL`
2016-05-30 01:10:47 -07:00
Edward Patel
92a27c37b3
MBL: Apply https://github.com/MarlinFirmware/Marlin/pull/3903 to example_configurations
2016-05-30 09:50:11 +02:00
Scott Lahteine
3861f1e0da
Merge pull request #3908 from jbrazio/bugfix/3826
...
Closes #3826 : SD printing will now pause and stop the print counter
2016-05-30 00:08:57 -07:00
Scott Lahteine
8806c7bbcc
Merge pull request #3903 from epatel/marlin/mbl_negative_xy
...
MBL: Fix for negative x/y positions
2016-05-29 22:07:35 -07:00
Scott Lahteine
dc22097b3a
Fix some of array initializations
...
- In `stepper.h` init `count_direction` array
- In `ultralcd.cpp` init `autotune_temp` array
2016-05-29 20:55:13 -07:00
João Brázio
40e64b36de
Closes #3826 : SD printing will now pause and stop the print counter
...
The LCD menu items for SD printing pause/stop have been updated to control
also the print job timer. This commit also fixes a small output bug with
M78, the failed print counter was displaying the wrong value.
2016-05-30 00:56:39 +01:00
Edward Patel
eb2746a34f
MBL: Fix for negative x/y positions
2016-05-28 21:05:43 +02:00
Scott Lahteine
fe3122774a
Merge pull request #3806 from thinkyhead/rc_coreyz_support
...
Support for COREYZ. Fixes for COREXY, COREXZ
2016-05-26 18:50:43 -07:00
Scott Lahteine
fad7680605
Slower SPI speed for MAX31855
2016-05-25 18:15:36 -07:00
Scott Lahteine
30f6b84561
Merge pull request #3812 from thinkyhead/rc_mbl_index_finders
...
Two index finding functions for MBL
2016-05-23 15:54:37 -07:00
Scott Lahteine
89e630b2fb
Merge pull request #3808 from thinkyhead/rc_singlenozzle
...
SINGLENOZZLE
2016-05-23 15:52:19 -07:00
Scott Lahteine
827738a790
set_z parameters marked const
2016-05-23 14:25:43 -07:00
Scott Lahteine
9049f4084b
EEPROM report uses G29 S3
2016-05-23 14:25:43 -07:00
Scott Lahteine
4955163959
Propose simpler probe index methods
2016-05-23 14:25:43 -07:00
Scott Lahteine
a1a5cb5393
Propose simpler cel index methods
2016-05-23 14:25:42 -07:00
Scott Lahteine
360adc6a3b
Small reduction in M421 code
2016-05-23 14:25:42 -07:00
Scott Lahteine
a4ed988c60
Two index finding functions for MBL
2016-05-23 14:25:42 -07:00
Scott Lahteine
0e55c06f7d
Rename CORE_AXIS_3 to NORMAL_AXIS
2016-05-23 13:58:40 -07:00
Scott Lahteine
5172d4ba40
COREYZ stepper, planner, endstop, babysteps
2016-05-23 13:58:40 -07:00
Scott Lahteine
6c7f4909b1
COREYZ Conditionals, SanityCheck for only a single kinematic
2016-05-23 13:58:40 -07:00
Scott Lahteine
95fee8ca81
Add option for CoreYZ kinematics
2016-05-23 13:58:40 -07:00
Scott Lahteine
678cbad76a
Merge pull request #3819 from jbrazio/bugfix/followup-3813
...
Followup for #3813
2016-05-23 13:56:11 -07:00
AnHardt
bb66ffb2ae
Correct hardware endstops default
...
All credits to RicardoGA
2016-05-23 10:54:22 +02:00
João Brázio
75221fa673
Followup for #3813
2016-05-22 13:14:58 +01:00
Scott Lahteine
f9b4b90058
Merge pull request #3813 from jbrazio/bugfix/3809
...
Stopwatch and PrintCounter improvements
2016-05-21 18:33:57 -07:00
João Brázio
8c0edb2de4
Fixes #3809 and adds several improvements to the Stopwatch and
...
PrintCounter classes
2016-05-22 01:59:59 +01:00
Scott Lahteine
c5130fd23b
Additional instructions for controller reverse options
2016-05-20 18:14:50 -07:00
Scott Lahteine
cadf441059
Merge pull request #3798 from AnHardt/extend-M421
...
Extend M421 with I and J parameters
2016-05-20 16:17:23 -07:00
Scott Lahteine
0c7c45063b
PID_ADD_EXTRUSION_RATE based on MarlinKimbra
2016-05-20 16:15:05 -07:00
Scott Lahteine
92ac133f2b
Conditionals and Sanity Check for SINGLENOZZLE
2016-05-20 15:48:27 -07:00
Scott Lahteine
69abfef82e
Add "SINGLENOZZLE" extruder option
2016-05-20 15:45:11 -07:00
AnHardt
f5a036510f
Extend M421 with I and J parameters
...
Extend M421 with I and J parameters
2016-05-21 00:18:09 +02:00
Scott Lahteine
2f6e7b7b9b
Merge pull request #3805 from MatixYo/patch-7
...
Update language_pl.h to the latest strings
2016-05-20 14:50:49 -07:00
Scott Lahteine
1a6c72cb57
Apply to the rest of the configs
2016-05-20 11:52:27 -07:00
Scott Lahteine
37c6d0f4ed
Reword MESH_G28_REST_ORIGIN comment
2016-05-20 11:52:27 -07:00
Edward Patel
c7d90dc5ec
Add option to configure G28 all axis resting position for MBL
2016-05-20 11:52:27 -07:00
Mateusz Juszczyk
bbe4c20ef6
Update language_pl.h
2016-05-20 13:24:34 +02:00
Scott Lahteine
319d184999
Merge pull request #3803 from jbrazio/feature/buildroot-cleanup
...
Buildroot cleanup
2016-05-19 21:34:11 -07:00
Scott Lahteine
a469341555
Merge pull request #3800 from jbrazio/feature/move-felix-cfg
...
Moves Felix's dual configuration to a folder
2016-05-19 18:53:39 -07:00
João Brázio
14652bb141
Moves shared helper scripts to the buildroot
2016-05-20 02:25:13 +01:00
João Brázio
80f05920c5
Moves Felix's dual configuration to a folder
2016-05-20 00:49:16 +01:00
Scott Lahteine
8218558953
Update comments, rename next_ping_ms, followup to #3797
2016-05-19 16:44:57 -07:00
Scott Lahteine
6d68b12e28
Merge pull request #3797 from AnHardt/fix-screen-updatedelay
...
Rework intermediate idle() and manage_heater() calls in G2/G3 and G5
2016-05-19 16:29:27 -07:00
AnHardt
e761bdbb4b
Remove SF_ARC_FIX from G5 (Cubic B-spline)
...
Remove SF_ARC_FIX from G5 (Cubic B-spline).
SF_ARC_FIX is a fix for G2/G3 (arcs) where Skeinforge always produced relative instead of absolute coordinates for the endpoint of an arc.
It's very unlikely this is also a problem with Cubic B-splines. More likely is copying from the G2/G3 code.
2016-05-19 21:00:12 +02:00
AnHardt
2207001333
No compromises for the manage_heater()
...
No compromises for the manage_heater(). manage_heater() will return immediately when there is nothing to do, but needs a constant detaT to work proper.
Calling idle() only every 200ms results in a display update every ~2 seconds - that should be enough.
For the other functionalities in idle() and manage_inactivity() 200ms is a lot but hopefully works.
2016-05-19 20:52:11 +02:00
AnHardt
0c4d885d5b
Speedup sreen update delay
...
Speedup sreen update delay
and correct a comment.
A module division by 10 is slooooow. (powers of 2 are fast - but then you can AND a bitmask with the same result)
2016-05-19 15:41:09 +02:00
Rafa Couto
9d416289cc
Update Galician language to 1.1.0-RCBugFix.
2016-05-19 19:33:40 +09:00
Scott Lahteine
07c9a11c3c
Automatically set X2 stepper pins
2016-05-18 19:09:09 -07:00
Scott Lahteine
8aa591ca09
Merge pull request #3789 from jbrazio/feature/m999-s-arg
...
Implements S1 argument in M999
2016-05-18 16:58:09 -07:00
Scott Lahteine
138c5c8378
Merge pull request #3788 from thinkyhead/rc_dual_x_compile_fix
...
DUAL_X_CARRIAGE fixes, improvements, Travis test
2016-05-18 16:56:54 -07:00
João Brázio
e6effb8f35
Implements S1 argument in M999
2016-05-19 00:13:33 +01:00
Scott Lahteine
2a7b1a85f7
Improve DUAL_X_CARRIAGE sanity check errors
2016-05-18 15:59:28 -07:00
Scott Lahteine
516e79bbda
Declare extruder_duplication_enabled in Marlin.h
2016-05-18 15:51:44 -07:00
esenapaj
56d5ae596c
Update Japanese trasration
...
・Add new translation
・Change translation
2016-05-18 20:42:50 +09:00
Scott Lahteine
4041508ffb
Function decl. in headers don't need "extern"
2016-05-17 18:35:01 -07:00
Scott Lahteine
82c2d308dc
Merge pull request #3783 from thinkyhead/rc_bezier_delta_fix
...
Bezier style and DELTA patch
2016-05-17 18:27:48 -07:00
Scott Lahteine
ecec5c5e58
Bezier style and DELTA patch
2016-05-17 18:06:10 -07:00
Scott Lahteine
d66e53c42b
Merge pull request #3782 from thinkyhead/rc_home_z_before_g29
...
Require homing of Z before G29
2016-05-17 17:53:56 -07:00
Scott Lahteine
552516ddf5
Merge pull request #3781 from AnHardt/minor-delta-segmenting-speedup
...
Minor DELTA segmentation speedup
2016-05-17 17:17:38 -07:00
Scott Lahteine
a28970784c
XYZ unhomed
2016-05-17 17:02:53 -07:00
Scott Lahteine
a9926b71a4
Require homing of Z before G29
2016-05-17 16:57:12 -07:00
AnHardt
41e9569dbc
Minor DELTA segmentation speedup
...
Minor DELTA segmentation speedup by pulling calculations out of the loop.
2016-05-18 01:49:30 +02:00
Scott Lahteine
3016dfe484
Merge pull request #3744 from thinkyhead/rc_bezier_curves
...
Add BEZIER_CURVE_SUPPORT — G5 command
2016-05-17 13:57:38 -07:00
Scott Lahteine
d0ac4541d3
Merge pull request #3775 from jbrazio/bugfix/followup-3770
...
G29: Report final position back to host when using MBL
2016-05-17 13:55:26 -07:00
João Brázio
b6a3aef297
G29: Report final position back to host when using MBL
2016-05-17 01:27:59 +01:00
esenapaj
95f30529a6
Add stowing process for MECHANICAL_PROBE
2016-05-16 18:12:10 +09:00
esenapaj
e2b87f6c85
Separate Z_PROBE_ALLEN_KEY from MECHANICAL_PROBE
2016-05-16 18:12:10 +09:00
Scott Lahteine
58339aea5f
Merge pull request #3769 from jbrazio/bugfix/iteration-invokes-undef-behavior
...
Bugfix: iteration invokes undefined behavior
2016-05-15 20:36:25 -07:00
Scott Lahteine
26b4cb5b42
Merge pull request #3771 from thinkyhead/rc_auto_fans_again
...
Fix checkExtruderAutoFans
2016-05-15 20:32:31 -07:00
Scott Lahteine
c9271e610b
Merge pull request #3762 from jbrazio/bugfix/lcd-hide-bed-icon
...
Remove the hotbed icon from the status screen
2016-05-15 19:11:05 -07:00
Scott Lahteine
2f14934c65
Fix checkExtruderAutoFans
...
Make sure to only set the fan state once when extruders share a fan
2016-05-15 18:54:37 -07:00
João Brázio
ecd490ed49
Bugfix: iteration invokes undefined behavior
2016-05-15 22:45:08 +01:00
Scott Lahteine
abdfd914f8
Merge pull request #3763 from esenapaj/patch-4
...
Follow-up for #3720 and #3759
2016-05-15 12:37:51 -07:00
Scott Lahteine
754b0152f5
Fix MBL zigzag calls
2016-05-15 12:35:01 -07:00
esenapaj
6d722716f7
Follow-up the PR #3720 and #3759
...
Update forgotten Configuration_DUAL.h
2016-05-15 14:08:45 +09:00
João Brázio
451000387d
Remove the hotbed icon when HAS_TEMP_BED is false
2016-05-15 03:00:05 +01:00
Scott Lahteine
a058226799
Prevent watchdog timeout in bezier moves
2016-05-14 17:41:16 -07:00
Scott Lahteine
13175ce7da
Fix error checking in M421
2016-05-14 17:12:44 -07:00
Scott Lahteine
bc5a547d55
More robust MBL index / point conversion
2016-05-14 16:45:56 -07:00
Scott Lahteine
a3520b6f01
More precision in M503 output for MBL's M421
2016-05-14 16:19:37 -07:00
Scott Lahteine
1b90682617
Merge pull request #3702 from thinkyhead/rc_sensitive_fan_pins
...
Remove need to define unused pins as -1 in pins files
2016-05-14 15:49:22 -07:00
Scott Lahteine
c8a40f06a6
Merge pull request #3759 from thinkyhead/rc_more_printcounter
...
Printcounter bugfix and some new features
2016-05-14 15:36:31 -07:00
Scott Lahteine
585c8a918f
Merge pull request #3758 from thinkyhead/rc_verbiage
...
Tweaks to some verbiage
2016-05-14 15:27:11 -07:00
João Brázio
f9a62f6a8e
Added PRINTJOB_TIMER_AUTOSTART section to example config files
2016-05-14 15:22:45 -07:00
João Brázio
8a18c52002
Adds an option to disable print job timer auto start
2016-05-14 15:22:44 -07:00
João Brázio
a79267217b
M78 now allows stats reset using the S78 argument
2016-05-14 15:22:44 -07:00
João Brázio
b660f1bdb8
Bugfix: Multiple M77 no longer increment the print counter
2016-05-14 15:22:43 -07:00
Scott Lahteine
c63f95f2fe
Merge pull request #3748 from clexpert/patch-1
...
Lastest changes in Czech translate
2016-05-14 15:12:39 -07:00
Scott Lahteine
e01e52969e
Merge pull request #3757 from thinkyhead/rc_fix_auto_fans
...
Don't try to enable unused auto fans
2016-05-14 15:09:24 -07:00
Scott Lahteine
ddf3e1e22d
Tweaks to some verbiage
2016-05-14 15:06:09 -07:00
Scott Lahteine
a713043acd
Merge pull request #3749 from esenapaj/patch-3
...
Enclose all #error strings by double-quotes
2016-05-14 15:01:56 -07:00
Scott Lahteine
3cfea3ff12
Merge pull request #3752 from AnHardt/fix-FIX_MOUNTED_PROBE
...
G29 missing FIX_MOUNTED_PROBE condition
2016-05-14 15:00:42 -07:00
Scott Lahteine
08dfe08f9a
Merge pull request #3754 from jbrazio/feature/update-pt_PT
...
Updated pt_PT language pack
2016-05-14 15:00:12 -07:00
Scott Lahteine
596ebccd54
Merge pull request #3753 from jbrazio/feature/followup-3740
...
Warn user about useless of individual axis homing and DELTA kinematics
2016-05-14 14:59:49 -07:00
Scott Lahteine
6e3556cb75
Merge pull request #3746 from esenapaj/patch-2
...
Update Japanese translation
2016-05-14 14:57:43 -07:00
Scott Lahteine
ddac17a195
Add BEZIER_CURVE_SUPPORT (G5 XYZEFIJPQ)
2016-05-14 14:52:08 -07:00
Scott Lahteine
b4c891dfd2
Remove obsolete reference to prepare_arc_move
2016-05-14 14:51:09 -07:00
Scott Lahteine
9f6b8f7d5b
Remove extra @section directive from configs
2016-05-14 14:51:09 -07:00
Scott Lahteine
4d6bb52b26
Don't try to enable unused auto fans
...
Addressing #3743
2016-05-14 14:46:14 -07:00
Scott Lahteine
f13c4a9ec4
Merge pull request #3720 from jbrazio/feature/host-keepalive
...
Removes the DISABLE from HOST_KEEPALIVE
2016-05-14 14:39:31 -07:00
João Brázio
596f15348d
Updated pt_PT language pack
2016-05-14 01:45:15 +01:00
João Brázio
d7522152e1
Warn user about useless of individual axis homing and DELTA kinematics
2016-05-14 01:35:05 +01:00
AnHardt
8a4376d51f
Idle during long arcs
...
Idle during long arcs
to prevent from watchdog resets during high segmented fast arcs.
2016-05-14 00:29:13 +02:00
esenapaj
888443ca1e
Enclose all #error strings with apostrophes
2016-05-13 21:10:23 +09:00
Petr Zahradnik
50b1a6bb2b
Lastest changes in Czech translate
2016-05-13 13:51:13 +02:00
AnHardt
b74af78736
Make arc support (G2/G3) configurable
...
Saves about 2669 bytes when deactivated. (About 1% for a AT2560, about __4%__ for a AT644!)
2016-05-13 13:27:45 +02:00
AnHardt
aef2559bd8
fix-FIX_MOUNTED_PROBE
...
Add a forgotten condition
2016-05-13 12:07:17 +02:00
esenapaj
e9d851137d
Update Japanese translation
...
・Add new translation
2016-05-13 18:52:35 +09:00
Scott Lahteine
14cd0f4c92
Merge pull request #3740 from thinkyhead/rc_lcd_home_options
...
Individual Axis Homing LCD menu items
2016-05-12 11:59:46 -07:00
esenapaj
69511b5e5e
Follow-up the PR #3719(Harmonize LCD comment section)
...
It update forgotten Configuration_DUAL.h.
2016-05-12 19:16:36 +09:00
Scott Lahteine
675e92ab1f
Merge pull request #3738 from thinkyhead/rc_limit_i2c_request
...
Print an error on bad i2c request
2016-05-11 19:36:49 -07:00
João Brázio
09150cae79
Individual Axis Homing LCD menu items
2016-05-11 19:28:19 -07:00
Scott Lahteine
4dc4e2063f
Add REVERSE_ENCODER_DIRECTION option
2016-05-11 15:39:28 -07:00
Scott Lahteine
aaeadf0cbd
If no "B" parameter given, get 1 byte
2016-05-11 15:30:08 -07:00
Scott Lahteine
a6d594665b
Print an error on bad i2c request
...
Reference: https://github.com/MarlinFirmware/Marlin/pull/3713#issuecomment-218333678
2016-05-11 15:30:02 -07:00
João Brázio
85b2c80838
Updated example configurations
2016-05-11 01:45:49 +01:00
João Brázio
ac7f634956
Removed the DISABLE from HOST_KEEPALIVE_FEATURE option
2016-05-11 01:45:49 +01:00
Scott Lahteine
a454a88f9c
Merge pull request #3722 from jbrazio/bugfix/printcounter
...
Minor #warning fix for PrintCounter
2016-05-10 17:17:04 -07:00
Scott Lahteine
03bda5c141
Merge pull request #3719 from jbrazio/feature/update-configs
...
Harmonize LCD comment section
2016-05-10 17:16:23 -07:00
Scott Lahteine
c827671299
Mention Z_PROBE_ALLEN_KEY in probe sanity checks
2016-05-10 13:50:20 -07:00
Scott Lahteine
be5d17de17
Merge pull request #3713 from thinkyhead/rc_file_offset_long
...
Use code_value_long for potentially large values
2016-05-10 09:15:53 -07:00
Scott Lahteine
56dd31ea3c
Use code_value_long for potentially large values
...
Addressing #3711
2016-05-10 09:15:31 -07:00
João Brázio
eafa16a781
Minor #warning fix for PrintCounter
2016-05-10 14:14:54 +01:00
João Brázio
5373ac6373
Updated example configurations
2016-05-10 13:42:00 +01:00
João Brázio
aa5a4716cf
Update default config
2016-05-10 13:37:21 +01:00
esenapaj
1a75509a3c
Cleanup for Danish file
...
・Arrange the strings in unified order
・Remove "#ifdef DELTA_CALIBRATION_MENU" directive
・Adjust spacing
2016-05-10 02:43:25 +09:00
esenapaj
cf6c607425
Update Japanese translation
...
・Add new translation
・Add translation for 16 width ASCII LCD
・Change translation
・Revert translation from Japanese to English
・Fix typo
2016-05-10 02:43:24 +09:00
Scott Lahteine
6f36b7c1cd
Merge pull request #3224 from yarda/fix-melzi2-arduino-1.6.x
...
Fixed Makefile to work with Melzi2 boards on arduino-1.6.x
2016-05-08 19:33:37 -07:00
Scott Lahteine
050e0bd2af
Merge pull request #3705 from thinkyhead/rc_runaway_logic
...
Fallthru in thermal runaway test when TRState changes
2016-05-08 19:00:24 -07:00
Scott Lahteine
5f7ad16b19
Merge pull request #3707 from thinkyhead/rc_fix_delta_blocking_move
...
Fix dipping on DELTA robots during G29
2016-05-08 18:42:57 -07:00
Scott Lahteine
96b71e62c0
Fix dipping on DELTA robots during G29
...
- Addressing #3689 , et. al.
2016-05-08 18:28:46 -07:00
Scott Lahteine
ea1dd31851
Enclose #error strings with apostrophes in quotes
2016-05-08 18:08:39 -07:00
Scott Lahteine
9b92bb8f31
Set the initial state based on target temperature
2016-05-08 17:25:44 -07:00
Scott Lahteine
6b13c430ae
The TRReset state is not needed with fall-through
2016-05-08 17:01:46 -07:00
Scott Lahteine
c2522ce1f5
Fallthru in thermal runaway test when TRState changes
2016-05-08 16:51:33 -07:00
Scott Lahteine
d32d9a3c5c
Merge pull request #3672 from thinkyhead/rc_consolidate_probe_flags
...
Cleanup and consolidate probe conditionals for clarity
2016-05-08 16:42:22 -07:00
Scott Lahteine
15fc93d742
Cleanup and consolidate probe conditionals for clarity
2016-05-08 12:59:43 -07:00
Scott Lahteine
5ca6334fd2
Cleanup pins files, fixup analogtodigitalpin, etc.
2016-05-08 12:38:00 -07:00
esenapaj
9186be7b83
Fix compilation error in debugging code
...
Fix compilation error in Thermal Runaway debugging code
2016-05-09 01:57:21 +09:00
Scott Lahteine
51109d4af7
Use AxisEnum with _lcd_babystep()
2016-05-05 21:04:30 -07:00
Scott Lahteine
b65ea98d6b
Localize babystepping in the Temperature class
...
So that `ultralcd.cpp` doesn’t need to worry about the details.
2016-05-05 15:00:31 -07:00
Scott Lahteine
0c7beb832c
Merge pull request #3681 from esenapaj/patch-1
...
Follow-up the PR #3643(Temperature singleton)
2016-05-05 12:47:06 -07:00
Scott Lahteine
fc5fe2cc22
Merge pull request #3678 from jbrazio/rework/delta-diagonal-rod-timmers
...
Moved DELTA radius/rod default trimmer values to Conditionals.h
2016-05-05 11:38:14 -07:00
esenapaj
1a97442d19
Follow-up the PR #3643(Temperature singleton)
...
Follow-up the PR #3643(Temperature singleton)
・Change from fanSpeedSoftPwm[0] to thermalManager.fanSpeedSoftPwm[0] in planner.cpp
It fix compilation error when FAN_SOFT_PWM is enabled.
・Remove declaration of setExtruderAutoFanState() in temperature.h
Because that function was abolished.
・Change from babystepsTodo to thermalManager.babystepsTodo in ultralcd.cpp
It fix compilation errors when BABYSTEPPING is enabled.
2016-05-05 18:01:39 +09:00
Scott Lahteine
4f6120f70f
Merge pull request #3643 from thinkyhead/rc_singletons_plus_temperature
...
Temperature singleton
2016-05-04 20:41:46 -07:00
Scott Lahteine
084f6b5b44
Temperature singleton class
2016-05-04 19:42:12 -07:00
Scott Lahteine
142bd3f3e7
Disable THERMAL_PROTECTION_BED with no sensor
2016-05-04 19:36:51 -07:00
Scott Lahteine
13f85a2b50
Can't use the ENABLED macro as a boolean
2016-05-04 16:33:57 -07:00
João Brázio
23567a1d8b
Moved DELTA radius/rod default trimmer values to Conditionals.h
2016-05-05 00:18:32 +01:00
Scott Lahteine
b4b5c7a6b7
Merge pull request #3670 from thinkyhead/rc_scoovo_controller
...
Use directional buttons when defined
2016-05-03 17:42:18 -07:00
Scott Lahteine
6398d497b3
Ultimate followup to Stepper/Planner patch
...
- Search all symbols and apply prefixes where needed
- Encapsulate some private methods
- Inline some setters
- Make `microstep_mode` a public method
2016-05-03 17:07:37 -07:00
Scott Lahteine
ddafb859e2
Use directional buttons when defined
2016-05-03 12:50:49 -07:00
Scott Lahteine
b959020532
Merge pull request #3667 from esenapaj/patch-1
...
Additional follow-up the PR #3631(Encapsulate S...
2016-05-03 09:36:09 -07:00
esenapaj
212b17d510
Fix for PR #3526(Configuration.h LCD & SDCard s...
...
Fix for PR #3526(Configuration.h LCD & SDCard section rewrite)
It removes duplicated BQ_LCD_SMART_CONTROLLER.
2016-05-03 21:35:02 +09:00
esenapaj
605808fe37
Additional follow-up the PR #3631(Encapsulate S...
...
Additional follow-up the PR #3631(Encapsulate Stepper, Planner, Endstops in singleton classes)
・Change from abort_on_endstop_hit to stepper.abort_on_endstop_hit in endstop.cpp, Marlin_main.cpp, and ultralcd.cpp
・Add include path to cardreader.h and temperature.h in endstop.cpp(for CardReader class and disable_all_heaters())
It fix compilation error when ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED and SDSUPPORT are enabled.
・Change from digipot_current() to stepper.digipot_current() in Marlin_main.cpp
・Change from digitalPotWrite() to stepper.digitalPotWrite() in Marlin_main.cpp
It fix compilation errors when HAS_DIGIPOTSS is enabled.
・Change from microstep_mode() to stepper.microstep_mode() in Marlin_main.cpp
・Change attribute of microstep_mode() from private to public in stepper.h
・Change from microstep_readings() to stepper.microstep_readings() in Marlin_main.cpp
・Change from microstep_ms() to stepper.microstep_ms() in Marlin_main.
It fix compilation errors when HAS_MICROSTEPS is enabled.
2016-05-03 18:28:37 +09:00
Scott Lahteine
7fd0243048
Cleanup, debug strings in Planner::adjusted_position
2016-05-02 20:11:27 -07:00
Scott Lahteine
85e732d5fd
Fix BABYSTEPPING, add it to Travis test
2016-05-02 20:01:00 -07:00
Scott Lahteine
37c4970d87
Merge pull request #3660 from esenapaj/patch-2
...
Follow-up the PR #3631(Encapsulate Stepper, ...
2016-05-02 15:23:38 -07:00
Scott Lahteine
ad27d3c523
Merge pull request #3659 from esenapaj/patch-1
...
Some clean-up for example configuration files
2016-05-02 15:22:29 -07:00
Scott Lahteine
f1c1a8dc59
Merge pull request #3661 from Blue-Marlin/83filen2
...
8.3-filenames second try
2016-05-02 14:47:26 -07:00
Jochen Groppe
0bae00c1ed
Merge pull request #3644 from tkurbad/german_translation
...
Revisited German translation
2016-05-02 16:46:19 +02:00
Blue-Marlin
5ad7d263e9
8.3-filenames second try
...
Fix for #6 3593, #3648
this time excludung 'DEL' instead of accidently '~'.
2016-05-02 15:58:04 +02:00
Torsten Kurbad
aae2f502e0
Revisited German translation
2016-05-02 15:18:12 +02:00
esenapaj
a82cfcff2d
Follow-up the PR #3631(Encapsulate Stepper, ...
...
Follow-up the PR #3631(Encapsulate Stepper, Planner, Endstops in singleton classes)
plan_bed_level_matrix -> planner.bed_level_matrix in multi extruders section of Marlin_main.cpp
It probably fix the Issue #3658(plan_bed_level_matrix not declarate).
movesplanned() -> planner.movesplanned() in ADVANCED_OK section of Marlin_main.cpp
It fix compilation error when ADVANCED_OK is enabled
2016-05-02 22:04:26 +09:00
esenapaj
2fa4bc344c
Some clean-up for example configuration files
...
Some clean-up for example configuration files
Follow-up and fix the PR #3253(Make the Autotune item(s) in the LCD menu optional):
・Update forgotten file(Felix/Configuration_DUAL.h)
Follow-up the PR #3526(Configuration.h LCD & SDCard section rewrite):
・Add section of RigidBot Panel to RepRapWorld/Megatronics/Configuration.h
Follow-up the PR #3576(Z Safe Homing for all):
・Adjust spacing
Follow-up and fix the PR #3625(Print job statistics):
・Update forgotten file(Felix/Configuration_DUAL.h)
・Remove ambiguous character "f" in top of RigidBot/Configuration.h
2016-05-02 21:16:00 +09:00
Scott Lahteine
da47b83b3d
Revert PR 3648 to fix SD printing
...
The character 0x7E is common in 8.3 filenames. Maybe the last condition
should be removed completely instead.
2016-05-01 18:04:04 -07:00
Scott Lahteine
60c6efb75c
Merge pull request #3653 from thinkyhead/rc_bed_temp_watch_merge
...
Introduce temp watch protection for the bed
2016-05-01 13:58:28 -07:00
Scott Lahteine
5b7a6c217a
Include more fans in sensitive pins list
2016-05-01 13:49:32 -07:00
Scott Lahteine
f508c54c6c
Use #undef in AZTEEG_X3_PRO for RAMPS overrides
2016-05-01 13:49:32 -07:00
Scott Lahteine
c6f1337f5c
NOOP macro for do-nothing macros
2016-05-01 13:49:32 -07:00
Scott Lahteine
c2145566c7
Merge pull request #3631 from thinkyhead/rc_singletons
...
Encapsulate Stepper, Planner, Endstops in singleton classes
2016-05-01 13:47:47 -07:00
Scott Lahteine
fbf69081b4
Updated comment for THERMAL_PROTECTION_BED
2016-05-01 13:12:51 -07:00
gralco
908229dbb3
Introduce temp watch protection for the bed
...
When setting the bed temp via M140/M190 if the thermistor does not read an increase of WATCH_BED_TEMP_INCREASE degrees by WATCH_BED_TEMP_PERIOD seconds then it will throw "Error:Heating failed, system stopped! Heater_ID: bed" and call the kill() function.
Conflicts:
Marlin/Configuration_adv.h
2016-05-01 13:12:51 -07:00
Scott Lahteine
77d6e5283b
Merge pull request #3648 from Blue-Marlin/83filenames
...
Don't reject 8.3-filenames with chars > 0x7f
2016-04-30 17:48:03 -07:00
Scott Lahteine
24a15332b3
Encapsulate dual Z endstop handling
2016-04-30 17:26:50 -07:00
Scott Lahteine
462a8a951e
A little extra gcode_T spacing
2016-04-30 17:26:50 -07:00
Scott Lahteine
96f51f400f
Planner singleton class
2016-04-30 17:26:50 -07:00
Scott Lahteine
5076d12344
Localize M119 in Endstops class
2016-04-30 17:26:50 -07:00
Scott Lahteine
5e4e535ce8
Stepper and Endstops as singleton objects
2016-04-30 17:26:50 -07:00
Scott Lahteine
6d3e4e1f8f
Prevent stuck M109/M190 when target is changed
2016-04-30 17:03:54 -07:00
Blue-Marlin
ac4caab8f1
Don't mangel 8.3-filenames with chars > 0x7f
...
Don't mangel 8.3-filenames with chars > 0x7f
Windows produces 8.3filenames wit chars > 0x7f. Those have been rejected
by Marlin until now.
With these 'malformed' filenames can now be worked with:
In the LCD menue
With RepetierHost (V1.6.1 tested) - full support. Characters are
displayed as '?'
With Octoprint (1.2.10 tested) the files do not appear in the files
area. At the console, listed with M20 they appear with a '�'.
With Pronterface the files appear in the sd-window but you can't start
them. They are mangled by pronterface. The names are altered and than
recected by Marlin. In the console they apper with differen but not the
correct characters.
All in all a little step forward.
Fix for #3593
2016-04-30 17:37:22 +02:00
Scott Lahteine
eeef571be2
Merge pull request #3613 from thinkyhead/rc_acceleration_fix1
...
Fix an acceleration anomaly by making locals signed
2016-04-29 16:39:31 -07:00
Scott Lahteine
c3ef9993b9
Merge pull request #3625 from jbrazio/feature/print-counter
...
Print job statistics
2016-04-29 15:31:14 -07:00
Scott Lahteine
96b2b3f4fe
Merge pull request #3642 from thinkyhead/rc_quieter_wait_for_temps
...
Keepalive not needed while waiting for temperatures
2016-04-29 15:20:12 -07:00
João Brázio
e34f4653ef
Fixed a typo on the configuration files
2016-04-29 23:13:59 +01:00
João Brázio
1491d682fb
Miscellaneous tweaks on PrintCounter
2016-04-29 23:13:59 +01:00
João Brázio
27088e356f
Updated example configuration files
2016-04-29 23:13:59 +01:00
João Brázio
8fb23e899f
PrintCounter EEPROM read/write optimizations
2016-04-29 23:13:59 +01:00
João Brázio
9589e51810
Disable DEBUG_PRINTCOUNTER
2016-04-29 23:13:59 +01:00
João Brázio
e2da7e5000
Updated the default configuration and fixed a printcounter.h typo
2016-04-29 23:13:58 +01:00
João Brázio
d6cfcc9c8b
Added new G-Code: M78
2016-04-29 23:13:58 +01:00
João Brázio
4f541c5bb5
Added a new object: PrintCounter
2016-04-29 23:13:58 +01:00
João Brázio
26b166d7cf
Made all stopwatch::debug() calls static
2016-04-29 23:13:58 +01:00
Scott Lahteine
5897b58a70
Merge pull request #3634 from esenapaj/patch-2
...
Update distribution date and readme again
2016-04-28 21:19:08 -07:00
Scott Lahteine
f4706bb90e
Keepalive not needed while waiting for temperatures
2016-04-28 21:11:15 -07:00
Scott Lahteine
924285afa6
Merge pull request #3641 from thinkyhead/rc_reverse_menu_doc
...
Correct the REVERSE_MENU_DIRECTION comment
2016-04-28 20:28:46 -07:00
Scott Lahteine
f1b00eb12b
Correct the REVERSE_MENU_DIRECTION comment
2016-04-28 20:27:17 -07:00
Scott Lahteine
8905908081
Merge pull request #3632 from thinkyhead/i3_millie_language_fun
...
Simplified LCD Language settings
2016-04-28 19:52:10 -07:00
Scott Lahteine
6c48852b20
Update distribution date
2016-04-28 18:06:53 +09:00
Scott Lahteine
2142d5a62e
Merge pull request #3627 from Blue-Marlin/German-again-and-again-and-agin
...
Correct an error in lang_de
2016-04-27 20:14:15 -07:00
Scott Lahteine
0c11566f42
Replace LANGUAGE_INCLUDE with LCD_LANGUAGE
2016-04-27 20:06:40 -07:00
Scott Lahteine
259794c0be
Make DISPLAY_CHARSET_HD44780 a single setting
2016-04-27 20:06:40 -07:00
Blue-Marlin
e89f01d044
Correct an error in lang_de
...
There is no way to translate "A-travel" to "A Rückzug". Thats simply
wrong.
2016-04-27 12:59:48 +02:00
esenapaj
ee2f37f3cc
Update distribution date and readme
...
It sync with the RC.
2016-04-27 11:21:51 +09:00
Scott Lahteine
ad0f70f2f3
Merge pull request #3620 from Blue-Marlin/feedrate_atfer_toolchange
2016-04-26 17:33:15 -07:00
Scott Lahteine
d58c5ac446
Merge pull request #3618 from esenapaj/patch-1
2016-04-26 17:20:04 -07:00
Scott Lahteine
2bb5cf5291
Merge pull request #3622 from floyd871/patch-1
2016-04-26 17:14:36 -07:00
Blue-Marlin
e58e281473
Fix feedrate after toolchange
...
The fix is simple. Most changes are because of changed indendation,
bacause of leaving early for wrong tool number
2016-04-27 00:57:45 +02:00
João Brázio
32d798fcc7
Converted all files on src to Unix file format
2016-04-26 21:23:39 +01:00
Michael Neumann
59cfc84dad
German "Umlaute"
...
We don't have to avoid German "Umlaute" any more.
2016-04-26 21:52:05 +02:00
Matt Keveney
4dfc496965
added recalc_delta_settings() call in Config_RetrieveSettings. Appears to be necessary any time delta-related parameters (M665) are modified
2016-04-26 20:01:53 +09:00
Scott Lahteine
ec82e1e05d
Merge pull request #3616 from thinkyhead/rc_fixup_some_movement
...
General cleanup around high level move functions
2016-04-25 20:23:38 -07:00
Scott Lahteine
abeab792cb
General cleanup around high level move functions
...
- Use new `DEBUG_POS` macro for `DELTA` debug
- Neaten up `prepare_move` a smidgen
- Remove an old commented `prepare_move()` line
2016-04-25 20:02:24 -07:00
Scott Lahteine
66540f8b84
Merge pull request #3615 from thinkyhead/rc_whats_up_with_M112
...
Report current position to host after M206 / M428
2016-04-25 18:58:41 -07:00
Scott Lahteine
68d0347e67
Call report_current_position after M206 / M428
2016-04-25 18:43:28 -07:00
Scott Lahteine
dcb4cdaa9e
Call report_current_position instead of gcode_M114 directly
2016-04-25 18:43:27 -07:00
Scott Lahteine
e38baaa23e
Fix an acceleration anomaly by making locals signed
2016-04-25 14:17:20 -07:00
João Brázio
739dcda0f1
Renamed stopwatch::status to stopwatch::state
2016-04-25 17:40:43 +01:00
gralco
840e13f664
Introduce M108 cancel heatup for the hotend and bed
...
This G-code is asynchronously handled in the get_serial_commands() parser.
2016-04-25 08:33:33 -06:00
Scott Lahteine
fce1e843b9
Patch steps rate comment in trapezoid function
2016-04-24 19:38:58 -07:00
João Brázio
7de0161204
Updated example config files
2016-04-24 05:21:17 +01:00
João Brázio
3b6f75511f
Updated multiple pins files
2016-04-24 05:21:17 +01:00
João Brázio
170f7e8a45
Rework Marlin's versioning system
2016-04-24 05:21:17 +01:00
esenapaj
8d0b2f358a
Cleanup for language files
...
・Remove abolished strings (MSG_NOZZLE1, MSG_NOZZLE2)
・Remove duplicated strings
・Arrange the strings in unified order
・Adjust spacing
・Remove some comments in Japanese files(follow-up the PR #3560 )
The most part of these changes were salvaged from closed my PR#3550.
2016-04-23 13:27:05 +09:00
Scott Lahteine
2bb56ef6de
Merge pull request #3597 from thinkyhead/rc_fix_g29_debug
...
Move G29 debug output before matrix.set_to_identity()
2016-04-22 21:21:00 -07:00
João Brázio
a901555da4
Moved G29 debug output before matrix.set_to_identity()
2016-04-22 20:57:22 -07:00
Scott Lahteine
88c6693b9e
Fix a typo in #3586 to fix MBL
2016-04-22 20:04:08 -07:00
Scott Lahteine
aaf9d19954
Allow Z_SAFE_HOMING to compile without a probe
2016-04-21 15:55:49 -07:00
Scott Lahteine
92ab2c7dd8
Merge pull request #3587 from thinkyhead/rc_z_safe_homing_deps
...
Define dependencies for Z_SAFE_HOMING if left out
2016-04-21 15:46:24 -07:00
Scott Lahteine
63142eef40
Define dependencies for Z_SAFE_HOMING if left out
2016-04-21 15:22:19 -07:00
Scott Lahteine
173334e535
Merge pull request #3418 from jbrazio/translate/danish
...
Missing Danish translation
2016-04-21 14:56:43 -07:00
João Brázio
fe4fc88494
Closes #3351 : missing Danish translation
2016-04-21 21:31:47 +01:00
Scott Lahteine
003aab6dfd
Revert MBL menus to "known" working point
2016-04-21 12:59:55 -07:00
Scott Lahteine
6fac4d9211
Merge pull request #3579 from thinkyhead/rc_fix_dogm_and_mbl_menus
...
Fix menu redraw for DOGLCD, improve MBL
2016-04-20 20:52:56 -07:00
Scott Lahteine
7ddaa79ffe
Merge pull request #3578 from thinkyhead/rc_fix_twibus_less_debug_code
...
Reduce PROGMEM usage by TWIBus, stopwatch
2016-04-20 20:52:16 -07:00
Scott Lahteine
cfd10fcba1
Merge pull request #3577 from thinkyhead/rc_fix_G92_set_e_twice
...
Fix G92 setting E twice
2016-04-20 20:52:09 -07:00
Scott Lahteine
dc2281d2f4
Add nextMenu, nextEncoderPosition to change menus after handler loop
2016-04-20 20:19:12 -07:00
Scott Lahteine
7fa2bda1b9
Give the "alive dot" its own blink
2016-04-20 18:57:17 -07:00
Scott Lahteine
9d5e1f32fd
Use axis_homed in _lcd_level_bed_homing, item in Prepare before homing
2016-04-20 18:53:33 -07:00
Scott Lahteine
0c2aa92b07
Z Safe Homing for all
...
The `Z_SAFE_HOMING` feature is coupled with probes and not leveling, so
make it available for general use.
2016-04-20 17:04:52 -07:00
Scott Lahteine
9bcb72e7f8
Further patches to MBL - break up into more handlers
2016-04-20 16:37:35 -07:00
Scott Lahteine
3f6ae85748
Fix some MBL display issues for DOGLCD
2016-04-20 16:36:45 -07:00
Scott Lahteine
71b4f189bf
lcd_implementation_drawedit can take 1 arg
2016-04-20 16:36:45 -07:00
Scott Lahteine
1caa2628da
Use sync_plan_position_e function elsewhere
2016-04-20 13:02:19 -07:00
Scott Lahteine
c7df961144
Fix G92 so it only sets the plan position once
2016-04-20 13:01:58 -07:00
Scott Lahteine
1addb50b62
Shrink debug code in TWIBus and disable by default
2016-04-20 12:44:30 -07:00
Scott Lahteine
21a6b66807
Shrink debug code in Stopwatch and disable by default
2016-04-20 12:44:30 -07:00
Scott Lahteine
e523a0dc61
Fix bug in TWIBus ctor declaration
2016-04-20 12:37:46 -07:00
Scott Lahteine
ee9bd66a68
Add comments to debug bit flags
2016-04-20 12:37:22 -07:00
Scott Lahteine
3db5a75f30
Merge pull request #3568 from thinkyhead/rc_various_fixes
...
General code cleanup, improved naming, etc.
2016-04-19 20:53:38 -07:00
Scott Lahteine
8a2587f017
Read size for MAX6675 from sizeof(max6675_temp)
2016-04-19 19:57:32 -07:00
Scott Lahteine
ac69fad96d
lowercase "stop" function
2016-04-19 19:43:54 -07:00
Scott Lahteine
39ee9c526b
setTargetedHotend => get_target_extruder_from_command
2016-04-19 19:43:54 -07:00
Scott Lahteine
cafa8b8ce3
Rename filament runout items
2016-04-19 19:43:39 -07:00
Scott Lahteine
27b2e2e786
Document some variables
2016-04-19 19:43:39 -07:00
Scott Lahteine
a4062a47ac
Rename baricuda variables
2016-04-19 19:43:38 -07:00
Scott Lahteine
78747b1328
min_pos/max_pos => sw_endstop_min/sw_endstop_max
2016-04-19 19:43:38 -07:00
Scott Lahteine
ba84d8d091
Allow setting PIDTEMP and PIDTEMPBED together or apart
2016-04-19 18:09:29 -07:00
Scott Lahteine
5cb8ec68ae
Merge pull request #3566 from thinkyhead/rc_babystep_show_steps
...
Show steps done in the babystep display
2016-04-18 21:52:55 -07:00
Scott Lahteine
3083ee49f3
Merge pull request #3567 from thinkyhead/rc_mf_bash_scripts
...
Git helper shell scripts for MarlinFirmware
2016-04-18 21:41:24 -07:00
Scott Lahteine
00d36d10e2
Merge pull request #3560 from thinkyhead/rc_better_graphical_lcd
...
Aesthetic, functional improvements for Graphical Display
2016-04-18 21:38:02 -07:00
Scott Lahteine
dd94ce5bd5
Merge pull request #3565 from thinkyhead/rc_look_at_3563
...
Output error message for M303 if PIDTEMP is disabled
2016-04-18 21:22:50 -07:00
Scott Lahteine
9a12054e0e
Git helper shell scripts for MarlinFirmware
2016-04-18 21:18:35 -07:00
Scott Lahteine
4f04bf7fe8
Show steps done in the babystep display
2016-04-18 20:52:38 -07:00
Scott Lahteine
d988708ceb
Merge pull request #3559 from esenapaj/patch-1
...
Update and change Japanese translation
2016-04-18 20:17:54 -07:00
Scott Lahteine
026ae8f2f0
Call lcd_setFont only when needed
2016-04-18 20:09:04 -07:00
Scott Lahteine
90c97c8185
Add _draw_axis_label function to reduce source
2016-04-18 20:09:04 -07:00
Scott Lahteine
34b17d4a8a
Reduce heater status code if no bed
2016-04-18 20:09:04 -07:00
Scott Lahteine
fc30aa9d88
Aesthetic and functional improvements for graphical LCD
2016-04-18 20:09:04 -07:00
Scott Lahteine
b281001329
Use MSG_X, etc., on Hitachi LCD
2016-04-18 20:09:04 -07:00
Scott Lahteine
f90a8661cb
Uppercase XYZE on Graphical LCD
2016-04-18 20:09:03 -07:00
Scott Lahteine
3613c550fa
Rename README file for fonts
2016-04-18 20:09:03 -07:00
esenapaj
1110814ecf
Update and change Japanese translation
...
Update and change Japanese translation
・Follow-up the PR #3411(Update Readme.fonts about Kana), Remove "who really..." strings. I had forgotten it.
・Add readable translated strings in comment
・Add Japanese translation.
MSG_LCD_ENDSTOPS "エンドストップ"
(utf8 version only. Because non-utf8 version ("ｴﾝﾄﾞｽﾄｯﾌﾟ") over 8 characters)
・Change translation.
MSG_ACC "カソクド mm/s2"
MSG_ACC "\xb6\xbf\xb8\xc4\xde mm/s2" ("ｶｿｸﾄﾞ mm/s2")
2016-04-19 11:28:26 +09:00
Scott Lahteine
a26d70e932
Apply indentation to gcode_M303, PID_autotune
2016-04-18 19:04:45 -07:00
Scott Lahteine
ba66336503
Output error for disabled M303
2016-04-18 19:03:45 -07:00
Scott Lahteine
eda821ca1c
Merge pull request #3556 from philfifi/fix_pullup
...
Fix bug in pullups handling for Z_MIN_PROBE
2016-04-18 18:04:26 -07:00
Scott Lahteine
25b1556a94
Merge pull request #3552 from tnw513/fix_endstops_witbox
...
Endstop settings modified (witbox). Issue #3547
2016-04-18 18:03:22 -07:00
Scott Lahteine
2bc2485313
Update font remarks in Conditionals.h
2016-04-18 17:33:41 -07:00
Philippe LUC
86c868771b
Fix bug in pullups handling for Z_MIN_PROBE
2016-04-18 21:16:23 +02:00
Silvio Didonna
91de69bb6e
Endstop settings modified. Witbox have max endstops for X and Y.
2016-04-18 16:46:19 +02:00
Scott Lahteine
f2558b1f2c
Additional delta config updates
2016-04-17 20:04:52 -07:00
Marc Urben
9a661bdd59
Updated Kossel XL config files for the latest Marlin
2016-04-17 20:04:19 -07:00
Scott Lahteine
09c6323b68
Merge pull request #3543 from thinkyhead/rc_better_bootscreen
...
Better splash screen consolidation
2016-04-17 17:20:13 -07:00
Scott Lahteine
5905ec5ba8
Merge pull request #3541 from thinkyhead/rc_mbl_one_last_lift
...
Add a final lift, if configured, in Manual Bed Leveling
2016-04-17 17:20:02 -07:00
Scott Lahteine
af1711365b
Merge pull request #3538 from jbrazio/bugfix/endtop-hit-redeclared
...
_ENDSTOP_HIT redeclared
2016-04-17 17:12:56 -07:00
Scott Lahteine
ed622ac796
Better splash screen consolidator
2016-04-17 17:06:07 -07:00
Jeff K
90c49f5a14
Fixed invalid addressing (overflow) of position_shift / software endstops
...
Signed-off-by: Jeff K
2016-04-17 19:28:50 -04:00
João Brázio
bcf1e027bb
Fix the redeclaration of _ENDSTOP_HIT
2016-04-17 18:37:37 +01:00
Scott Lahteine
c242bee449
Add a final lift, if configured, in Manual Bed Leveling
2016-04-17 00:12:46 -07:00
Scott Lahteine
b6227932f5
Merge pull request #3530 from thinkyhead/rc_set_rcbugfix_for_now
...
Set version for RCBugFix
2016-04-16 21:40:55 -07:00
Scott Lahteine
19741a0ba6
Merge pull request #3503 from thinkyhead/rc_lcd_endstop_msg
...
Show all endstops on LCD in checkHitEndstops
2016-04-16 21:32:25 -07:00
Scott Lahteine
7aaff371b0
Set version for RCBugFix
2016-04-16 21:30:52 -07:00
Scott Lahteine
db86aaf385
Merge pull request #3528 from thinkyhead/rc_fix_bed_level_equation_oopsie
...
Fix borked set_bed_level_equation_lsq
2016-04-16 21:01:06 -07:00
Scott Lahteine
837df6108c
Fix borked set_bed_level_equation_lsq
2016-04-16 20:35:42 -07:00
Scott Lahteine
7c16e774ca
Show all endstops on LCD in checkHitEndstops
2016-04-16 20:08:42 -07:00
Scott Lahteine
40050db210
Improve code in Sd2Card::readBlock
2016-04-16 20:03:39 -07:00
Scott Lahteine
8429ae6beb
Merge pull request #3525 from thinkyhead/rc_fix_pid_params_per_extruder
...
Fix broken PID_PARAMS_PER_EXTRUDER
2016-04-16 19:49:42 -07:00
Scott Lahteine
339b5b3e34
Patch more configs with new changes
2016-04-16 19:35:02 -07:00
Scott Lahteine
ef2fd620e9
Suggested fixups for LCD/SD config comments
2016-04-16 19:35:02 -07:00
João Brázio
7b5d6ba315
Rebase & feedback
2016-04-16 19:35:02 -07:00
João Brázio
d7cc2c0847
Moved some conditionals to Conditionals.h
2016-04-16 19:32:41 -07:00
João Brázio
36a49eab1c
Improved the LCD and SD comments blocks in Configuration.h
2016-04-16 19:32:41 -07:00
Scott Lahteine
d4a848c72a
Fix broken PID_PARAMS_PER_EXTRUDER
...
As noted by @FalloutBe in #3519
2016-04-16 19:19:40 -07:00
Scott Lahteine
0fc84b75f4
Merge pull request #3522 from esenapaj/patch-1
...
Follow-up and fix for the PR #3453(ELAPSED / PENDING for rollover-safe time checking)
2016-04-16 19:03:27 -07:00
Scott Lahteine
4b75b11a53
Wrap defines in parentheses in configs, M48
2016-04-16 18:21:09 -07:00
esenapaj
832e1c1f2a
Follow-up and fix for the PR #3453(ELAPSED / PENDING for rollover-safe time checking)
...
・Add more "UL" suffix
・Restore removed "UL" suffix
2016-04-17 07:50:02 +09:00
Scott Lahteine
234987ee2f
Fix MBL lift
2016-04-16 14:17:06 -07:00
Scott Lahteine
e0830bf8f1
Don't use LCD alert unless error or alert level is reset later
2016-04-15 18:48:49 -07:00
Scott Lahteine
773229b020
Merge pull request #3515 from thinkyhead/rc_wider_splash
...
On wider screens show a wider splash page, if possible
2016-04-15 17:26:01 -07:00
Scott Lahteine
86467c24be
On wider screens show a wider splash page, if possible
2016-04-15 16:42:29 -07:00
Scott Lahteine
a8e4d7c135
Merge pull request #3477 from alephobjects/BedTempHysteresis
...
Implementation of M190 bed temp hysteresis
2016-04-15 16:20:58 -07:00
esenapaj
5ecd75eeb3
Fix for PR #3502(General cleanup of arc code)
2016-04-16 07:22:07 +09:00
gralco
8ec8d59df8
Use #if TEMP_RESIDENCY_TIME > 0 rather than #ifdef TEMP_RESIDENCY_TIME
2016-04-15 11:20:32 -06:00
Scott Lahteine
1cc622b167
Fix minor spelling in comments
2016-04-14 20:06:59 -07:00
Scott Lahteine
866c5be395
Merge pull request #3500 from thinkyhead/rc_shrink_menu_macros
...
Reduce redundancy in MENU_ITEM code
2016-04-14 19:09:14 -07:00
Scott Lahteine
6e52b0b723
Merge pull request #3504 from thinkyhead/rc_fix_debugging
...
Fix debugging of vector_3
2016-04-14 19:08:30 -07:00
Scott Lahteine
88367a37f7
Merge pull request #3227 from thinkyhead/rc_home_offsets_and_limits
...
Relating current_position, min_pos, max_pos, and home_offset
2016-04-14 18:50:43 -07:00
Scott Lahteine
b20bf1826d
Fix debugging of vector_3
2016-04-14 18:45:26 -07:00
Scott Lahteine
4fb8013be1
Reduce redundancy in MENU_ITEM code
2016-04-14 18:42:06 -07:00
Scott Lahteine
b243844690
Merge pull request #3502 from thinkyhead/rc_fix_arcs_bugs
...
General cleanup of arc code
2016-04-14 18:19:44 -07:00
Scott Lahteine
f2abfd6d48
Merge pull request #3501 from thinkyhead/rc_config_comment_cleanup
...
Update some comments in Configuration.h
2016-04-14 18:19:29 -07:00
Scott Lahteine
2129db581e
Simplify MBL movement, zigzag
2016-04-14 16:58:42 -07:00
Scott Lahteine
0493fccc0b
mbl.active is a bool now
2016-04-14 16:58:42 -07:00
Scott Lahteine
b05f448317
Comments on MBL menu items
2016-04-14 16:58:42 -07:00
Scott Lahteine
e08dd0d831
Merge pull request #3498 from thinkyhead/rc_preheat_abs_both_3489
...
Fix bug in lcd_preheat_pla0123 and lcd_preheat_abs0123
2016-04-14 16:57:38 -07:00
Scott Lahteine
9e95f30de0
Merge pull request #3495 from jbrazio/bugfix/followup-3485
...
Throw an error if ENCODER_PULSES_PER_STEP < -1
2016-04-14 16:56:36 -07:00
Scott Lahteine
8e5099fa0c
Update software endstop positions with M206, M428, G92, etc.
2016-04-14 16:47:22 -07:00
Scott Lahteine
5cfb2533d6
Initial cleaning up of arc code
2016-04-14 16:43:49 -07:00
Scott Lahteine
de8c0baf8b
Update some comments in Configuration.h
2016-04-14 16:41:20 -07:00
Scott Lahteine
fda8f96f00
Fix bug in lcd_preheat_pla0123 and lcd_preheat_abs0123
...
Trying to preheat a non-existent extruder causes a crash.
2016-04-14 15:48:43 -07:00
João Brázio
9a3f676709
Throw an error if ENCODER_PULSES_PER_STEP < -1
2016-04-14 16:20:17 +01:00
gralco
69c00aea4c
Include bed hysteresis setting in the example configs
2016-04-14 08:03:38 -06:00
Scott Lahteine
9ce4264fda
Merge pull request #3490 from thinkyhead/rc_mbl_adjustments
...
Document some movement functions, rename a local
2016-04-13 20:55:20 -07:00
Scott Lahteine
f8e10ff1d8
Merge pull request #3491 from thinkyhead/rc_mechanical_probe
...
Support for "mechanical probe" with Allen Key as a special case
2016-04-13 20:55:14 -07:00
Scott Lahteine
7eb476597f
Update some comments in Configuration.h
2016-04-13 20:34:42 -07:00
esenapaj
2eb1b102f8
Support for "mechanical probe" with Allen Key as a special case
2016-04-13 20:34:12 -07:00
Scott Lahteine
cfcd3d7b3e
Rename z_offset local to zoffset
2016-04-13 20:09:20 -07:00
Scott Lahteine
5fd20ecac3
Comments on some movement functions
2016-04-13 20:09:20 -07:00
Scott Lahteine
c1b953d38f
Merge pull request #3487 from thinkyhead/rc_redo_esenpaj_3479
...
Apply esenapaj 3479 and delta/scara position bugfix
2016-04-13 18:11:33 -07:00
Scott Lahteine
a781a6f955
Apply esenapaj 3479 and delta/scara position bugfix
2016-04-13 17:41:20 -07:00
Scott Lahteine
2ae7394640
More fine-grained control of LCD redraw
2016-04-12 21:34:34 -07:00
Scott Lahteine
525d8256d4
Merge pull request #3481 from thinkyhead/rc_extruder_offset_array
...
Fix: gcode_T using non-existent Z offset
2016-04-12 18:23:08 -07:00
Scott Lahteine
b9301e6c62
Merge pull request #3482 from thinkyhead/rc_fix_HAS_Z_MIN_PROBE
...
Patch conditions for HAS_Z_MIN_PROBE
2016-04-12 18:23:02 -07:00
Scott Lahteine
dc0a3e37be
Patch conditions for HAS_Z_MIN_PROBE
2016-04-12 18:11:36 -07:00
Scott Lahteine
46881c846c
Add comments for extruder offset options
2016-04-12 17:16:58 -07:00
Scott Lahteine
edf376ce0d
Fix: gcode_T using non-existent Z offset
...
As noted by @snowzach in #3461
2016-04-12 17:15:10 -07:00
gralco
178aeb79c8
Implementation of M190 bed temp hysteresis
2016-04-12 08:56:14 -06:00
Scott Lahteine
0439483bc8
Merge pull request #3476 from thinkyhead/rc_debug_leveling_gcode_t
...
Add DEBUG_LEVELING output for gcode_T
2016-04-11 21:03:15 -07:00
Scott Lahteine
c03e5f5efd
Merge pull request #3475 from thinkyhead/rc_language_cleanup
...
General cleanup of language files
2016-04-11 20:50:57 -07:00
Scott Lahteine
910d3648bb
Merge pull request #3474 from thinkyhead/rc_russian_apr2016
...
Additional Russian translations
2016-04-11 20:50:50 -07:00
Scott Lahteine
63d8893f5d
Add DEBUG_LEVELING output for gcode_T
2016-04-11 20:45:10 -07:00
Scott Lahteine
081cfc5cf3
Merge pull request #3472 from thinkyhead/fix_issue_3375
...
Initialize stepper counts for Delta/SCARA
2016-04-11 19:59:12 -07:00
Scott Lahteine
fe0fe184aa
Replace some tabs with spaces
2016-04-11 19:42:20 -07:00
Scott Lahteine
e773d081c0
General language file cleanup
2016-04-11 19:42:09 -07:00
Scott Lahteine
b63c79b5ff
Merge pull request #3473 from thinkyhead/rc_one_more_elapse
...
Fix a messed up ELAPSED instance
2016-04-11 19:30:59 -07:00
Scott Lahteine
068bc980ce
Additional Russian translations
...
Thanks to @gans-AD – #3363
2016-04-11 19:30:14 -07:00
Scott Lahteine
f840c7de4d
Initialize stepper counts for Delta/SCARA
2016-04-11 19:02:35 -07:00
Scott Lahteine
c5a8755cc0
Fix a messed up ELAPSED instance
2016-04-11 18:48:27 -07:00
Scott Lahteine
81918657f4
Fix Deutsch string errors, redundancies
2016-04-11 18:12:32 -07:00
Scott Lahteine
56acaf3594
Merge pull request #3469 from thinkyhead/rc_aleph_cooldownfix
...
Fix for M109 and M190 cooldown
2016-04-11 18:01:01 -07:00
gralco
c218db136a
Fix for M109 and M190 cooldown
...
Also removes the re-definition of now inside M190's while loop
2016-04-11 17:12:23 -07:00
Scott Lahteine
e2a197ab71
Merge pull request #3467 from AnHardt/Fix-Servo-without-endstop-probe
...
Fix-Servo-without-endstop/probe
2016-04-11 17:04:54 -07:00
Scott Lahteine
3a1ac14bbc
Merge pull request #3437 from thinkyhead/rc_lcd_encoder_movement
...
More bits when encoderPosition is cast as signed
2016-04-11 17:03:23 -07:00
Scott Lahteine
c5a2ce4366
Merge pull request #3446 from thinkyhead/rc_fixup_M206_and_mesh
...
Fix home_offset handling and account for it in G29
2016-04-11 16:49:01 -07:00
Scott Lahteine
b1bb1c7989
Merge pull request #3466 from thinkyhead/rc_look_for_leveling_bug
...
Add CORE support to st_set_position and plan_set_position
2016-04-11 16:45:00 -07:00
AnHardt
9cc571b312
Fix-Servo-without-endstop-probe
...
Sorry for not having realized someone (me) redefined not existing servo pinns to -1, some lines above.
This is a simple error - not a feature.
2016-04-12 01:01:11 +02:00
Scott Lahteine
3e5312f116
CORE support for st_set_position & plan_set_position
2016-04-11 15:13:42 -07:00
Scott Lahteine
e087a99a10
Some cleanup of st_get_pos functions
2016-04-11 15:13:42 -07:00
João Brázio
ca6c6ec4ca
Versions of Arduino IDE prior to 1.6.0 are no longer supported
2016-04-11 19:03:06 +01:00
Scott Lahteine
fdee2be49c
More logging of matrix behavior
2016-04-11 00:06:33 -07:00
Scott Lahteine
7f265db3ef
Move sync_plan_position after DEBUG_LEVELING
2016-04-10 23:40:11 -07:00
Scott Lahteine
02550af7c3
Merge pull request #3453 from thinkyhead/rc_jbrazio_m190
...
ELAPSED / PENDING for rollover-safe time checking
2016-04-10 20:25:02 -07:00
Scott Lahteine
7c770f039c
Merge pull request #3456 from thinkyhead/rc_MSG_ERR_REDUNDANT_TEMP
...
Remove redundant text from MSG_ERR_REDUNDANT_TEMP
2016-04-10 20:23:55 -07:00
Scott Lahteine
925cc305ce
Merge pull request #3455 from michos-conradt/RCBugFix
...
Add missing translations for German
2016-04-10 19:18:42 -07:00
Scott Lahteine
011f4736f1
Remove redundant text from MSG_ERR_REDUNDANT_TEMP
2016-04-10 19:14:46 -07:00
Scott Lahteine
906c1c066f
Merge pull request #3423 from jbrazio/translate/pt_BR
...
Added missing pt_BR translation
2016-04-10 19:13:52 -07:00
Scott Lahteine
803845ec18
Add a case for M113 to process_next_command
2016-04-10 18:53:03 -07:00
Michael Conradt
f3a7a5c99b
Merge branch 'RCBugFix' into translations
2016-04-11 03:50:23 +02:00
Michael Conradt
8b923039e2
Add missing german translations.
2016-04-11 03:20:21 +02:00
Scott Lahteine
386140f361
Test time difference in safe way
2016-04-10 18:09:31 -07:00
Scott Lahteine
1b7356b3a1
Account for home_offset in G29 handler
2016-04-10 15:35:02 -07:00
Scott Lahteine
f3562dd895
Have M206 alter current_position, M428 use new function
2016-04-10 15:35:01 -07:00
Scott Lahteine
562e281c73
Merge pull request #3443 from thinkyhead/rc_host_timeout_tweak
...
Adjust timeout code in host_keepalive
2016-04-09 17:45:36 -07:00
Scott Lahteine
6d465321b5
Adjust timeout code in host_keepalive
2016-04-09 16:58:17 -07:00
Scott Lahteine
8198cc30b5
More bits when encoderPosition is cast as signed
2016-04-09 14:22:12 -07:00
Michael Neumann
95acba2cfa
Wrong Pin Assignment Megatronics 3
...
SERVO2 is doubled defined and causes compiler errors
2016-04-09 11:23:22 +02:00
Scott Lahteine
50c3140040
Merge pull request #3414 from thinkyhead/rc_host_timeout_mods
...
Host Keepalive configurable timeout with 2s default
2016-04-08 21:45:45 -07:00
Scott Lahteine
6bd20371f0
Merge pull request #3438 from thinkyhead/rc_M109_residency_loop_fix
...
Fix bug which can cause an infinite M109 loop
2016-04-08 21:36:30 -07:00
Scott Lahteine
96e37bb70a
Merge pull request #3419 from DavidBjerreBjoerklund/patch-2
...
Update language_da.h
2016-04-08 21:35:58 -07:00
Scott Lahteine
13d758c651
Merge pull request #3420 from DavidBjerreBjoerklund/patch-3
...
Update language_da.h
2016-04-08 21:31:14 -07:00
Scott Lahteine
518068a5a8
Merge pull request #3425 from tnw513/FixLangIt
...
Optimized Italian strings to fit in 16 character display
2016-04-08 21:29:28 -07:00
Scott Lahteine
1b81e5adc7
Merge pull request #3431 from AnHardt/lang-de
...
de-language additions
2016-04-08 21:25:00 -07:00
Scott Lahteine
1acf901b63
Adjustments to residency_start_ms handling
2016-04-08 21:20:23 -07:00
gralco
907aed57db
Fix bug which can cause an infinite M109 loop
...
Since residency_start_ms is -1 when entering the heatup while loop whilst the hotend temp is close to the target them already then it may not escape.
Hence "Start the TEMP_RESIDENCY_TIME timer when we reach target temp for the first time."
2016-04-08 21:20:23 -07:00
jbrazio
dd3a06a95a
Implemented M155 and M156, a generic TWI/I2C interface for Marlin
2016-04-08 20:14:37 -07:00
Scott Lahteine
843aa90b5a
Merge pull request #3434 from thinkyhead/rc_more_debug_leveling
...
Additional debug leveling output
2016-04-08 18:57:18 -07:00
Scott Lahteine
a644ab1de4
Minor patch ups to G29
...
This may fix a subtle bug caused by doing `G29` more than once without
`G28` between.
2016-04-08 17:53:15 -07:00
Scott Lahteine
cba2698871
Additional DEBUG_LEVELING output
2016-04-08 17:53:15 -07:00
AnHardt
c3d1b7db2d
de-language additions
2016-04-08 22:51:04 +02:00
Scott Lahteine
4e17187c96
Merge pull request #3426 from thinkyhead/rc_no_unhomed_lcd_move_on_delta_scara
...
No LCD Move for unhomed Delta/SCARA
2016-04-07 19:29:45 -07:00
Scott Lahteine
5e18d650c4
Merge pull request #3427 from thinkyhead/rc_better_SERIAL_ECHOPAIR
...
No casting needed for SERIAL_ECHOPAIR
2016-04-07 19:29:18 -07:00
Scott Lahteine
e0b0d1eb6b
Add M113 to get/set Host Keepalive
2016-04-07 19:25:56 -07:00
Scott Lahteine
85883da90c
Implement basic HOST_KEEPALIVE_INTERVAL
2016-04-07 19:25:56 -07:00
Scott Lahteine
2eca8d63b3
Add DEFAULT_KEEPALIVE_INTERVAL setting
2016-04-07 19:25:56 -07:00
Scott Lahteine
098fb8f8c9
Merge pull request #3413 from thinkyhead/rc_probe_G30_position
...
Report the probe position in G30
2016-04-07 19:25:33 -07:00
Scott Lahteine
3460d01441
Merge pull request #3422 from jbrazio/translate/pt_PT
...
Update pt_PT translation
2016-04-07 19:18:56 -07:00
Scott Lahteine
c9c7c66b95
Merge pull request #3421 from jbrazio/bugfix/m109-EXTRUDE_MINTEMP-expansion
...
M109: Protect against EXTRUDE_MINTEMP expansion
2016-04-07 19:18:34 -07:00
Scott Lahteine
d7cbb2eec9
Merge pull request #3403 from jbrazio/feature/stopwatch
...
Print job timer rework
2016-04-07 19:18:03 -07:00
Scott Lahteine
f834bcd43a
Merge pull request #3415 from thinkyhead/rc_filwidth_issue
...
Fix FILAMENT_WIDTH_SENSOR measurement
2016-04-07 19:08:42 -07:00
Scott Lahteine
5fc6daba2b
Disallow REPRAPWORLD_KEYPAD moves on Delta/SCARA until homed
2016-04-07 18:40:54 -07:00
Scott Lahteine
7bb15a1c57
Consolidate REPRAPWORLD_KEYPAD definitions
2016-04-07 18:40:54 -07:00
Scott Lahteine
dc19b69697
No casting needed for SERIAL_ECHOPAIR
2016-04-07 16:33:21 -07:00
Scott Lahteine
165e73794a
Tweak encoderPosition non-zero test
2016-04-07 16:09:42 -07:00
Scott Lahteine
479d307a44
Disable LCD Move XYZ for unhomed Delta/SCARA
2016-04-07 16:09:42 -07:00
Silvio Didonna
9088802da1
Optimized Italian strings to fit in 16 character display
2016-04-07 19:18:22 +02:00
João Brázio
801cd48a72
Added missing pt_BR translation
2016-04-07 13:07:57 +01:00
João Brázio
013f19054b
Update pt_PT translation
2016-04-07 13:00:08 +01:00
João Brázio
471d30cc1c
M109: Protected against EXTRUDE_MINTEMP expansion
2016-04-07 12:50:57 +01:00
DavidBjerreBjoerklund
5f840d2e30
Update language_da.h
...
Corrected:
MSG_KILLED
MSG_NO_MOVE
MSG_STOPPED
MSG_PRINT_ABORTED
MSG_ON
MSG_OFF
2016-04-07 13:42:27 +02:00
João Brázio
7c7e30f4cc
Adherence to the new OOP coding standards
2016-04-07 12:41:09 +01:00
DavidBjerreBjoerklund
b80b40a578
Update language_da.h
...
Added translation mentioned in issue #3351 :
Homing would be best tranlated homing, or "Kører til udgangsposition".
#define MSG_SET_HOME_OFFSETS
#define MSG_LEVEL_BED_HOMING
#define MSG_LEVEL_BED_WAITING
#define MSG_LEVEL_BED_DONE
#define MSG_LEVEL_BED_CANCEL
#define MSG_HOME_OFFSETS_APPLIED
2016-04-07 12:52:31 +02:00
Scott Lahteine
573d772c92
Merge pull request #3416 from paulusjacobus/RCBugFix
...
Optimised Ducth messages to fit in 16 Char display Update language_nl.h
2016-04-06 20:41:14 -07:00
paulusjacobus
3f7ae9a7ce
Update language_nl.h
...
Optimised all added messages to fit within 16 Characters
2016-04-07 13:15:00 +10:00
Scott Lahteine
865dcf3fb4
Fix FILAMENT_WIDTH_SENSOR measurement
...
Only measure and store filament width when E is going forward.
2016-04-06 19:48:04 -07:00
Scott Lahteine
2f6c5fe2da
Report the probe position in G30
2016-04-06 16:55:21 -07:00
Scott Lahteine
74effedbf5
Merge pull request #3412 from paulusjacobus/RCBugFix
...
rebased my fork with RCBugFix release in order to push language_nl.h
2016-04-06 16:53:35 -07:00
Scott Lahteine
bba1f16589
Merge pull request #3411 from esenapaj/patch-1
...
Update Readme.fonts about Kana
2016-04-06 16:19:19 -07:00
Paul de Groot
48a4410f02
rebased my fork with RCBugFix release in order to push language_nl.h
2016-04-07 08:17:59 +10:00
esenapaj
ff9511b870
Update Readme.fonts about Kana
...
I think that that sentence has been completed its part.
Because Kana fonts were revised by me the other day(PR #3289 ), who am a native Japanese.
And for @AnHardt,
I'd like to take this opportunity to express one's heartfelt gratitude as a far eastern person,
about you has been maintaining the resource of Japanese despite you are a far western person.
2016-04-07 07:13:46 +09:00
Silvio Didonna
e215c7100d
fixed mistranslations and minor changes for consistency between "it" and "en" files.
2016-04-06 16:45:04 +02:00
Silvio Didonna
6208db3b00
fixed mistranslations and minor changes for consistency between "it" and "en" files.
2016-04-06 16:40:01 +02:00
João Brázio
e48d0263bf
Bugfix: M32 was still using the old print timer
2016-04-06 04:41:36 +01:00
João Brázio
e8b80d8c20
Implemented M75, M76, M77 to control the print timer
2016-04-06 04:38:42 +01:00
João Brázio
eb61051556
Rework the print job timer to use the stopwatch class
2016-04-06 04:34:03 +01:00
João Brázio
399101fff3
Implemented the stopwatch class and methods
2016-04-06 04:23:45 +01:00
Scott Lahteine
98f2e9fc83
Reduce string storage required for DEBUG_LEVELING
2016-04-05 19:04:42 -07:00
Scott Lahteine
1af5d7b35f
Add more leveling-debug output
2016-04-05 18:31:10 -07:00
Scott Lahteine
d5b19a49f6
Merge pull request #3384 from thinkyhead/rc_adjust_M111_output
...
Final tweaks to M111 output
2016-04-05 16:48:59 -07:00
Scott Lahteine
da2ff4a6d3
Catch a TEMP_SENSOR error before a pins issue
2016-04-05 16:17:28 -07:00
Scott Lahteine
90f6f02aca
Merge pull request #3397 from thinkyhead/rc_menu_issues_fixer
...
Revert #3388 , clean up lcd_move code
2016-04-05 15:45:35 -07:00
Scott Lahteine
fb38d698db
Add feedback after "Click to Begin"
2016-04-05 15:35:05 -07:00
Scott Lahteine
d5f0db26dc
Merge pull request #3390 from jbrazio/docs/update-source-url
...
Update DEFAULT_SOURCE_URL comment
2016-04-05 15:17:07 -07:00
Scott Lahteine
ce58d1d4d5
Merge pull request #3392 from barus93/patch-2
...
Update language_it.h
2016-04-05 15:16:24 -07:00
Scott Lahteine
582b58e660
Add audio feedback to edit items
2016-04-05 14:51:11 -07:00
Scott Lahteine
a70c3ffc21
Minor syntax tweak with encoderPosition
2016-04-05 14:51:11 -07:00
Scott Lahteine
0f247187b8
Drop extra setting of currentMenu
2016-04-05 14:51:11 -07:00
Scott Lahteine
24cde86a4f
Fix syntax highlighting of menu_edit_type lines
2016-04-05 14:51:11 -07:00
Scott Lahteine
86372cd394
Add underscore to internal lcd move function names
2016-04-05 14:51:11 -07:00
Scott Lahteine
aa97328cd3
Use min_pos/max_pos for _lcd_move
2016-04-05 14:51:10 -07:00
Scott Lahteine
f936df9507
Small cleanup of feedrate dead-zone
2016-04-05 14:51:10 -07:00
Scott Lahteine
f5c2fb27cd
Handle defer_return_to_status in lcd_goto_menu
2016-04-05 14:51:10 -07:00
Scott Lahteine
8459f7fa5c
Use ms where possible.
2016-04-05 14:51:10 -07:00
Scott Lahteine
34ce9c4c1c
Restore save previous for menu edit items
2016-04-05 14:26:36 -07:00
Gege2B
03d5c9a482
Merge remote-tracking branch 'upstream/RCBugFix' into RCBugFix
2016-04-05 12:14:15 +02:00
Gege2B
4ea45d5c56
Some omitted french translation
2016-04-05 12:04:29 +02:00
barus93
f43e37bb0c
Update language_it.h
...
New messages translated:
#define MSG_LEVEL_BED_HOMING "Homing XYZ"
#define MSG_LEVEL_BED_WAITING "Click to Begin"
#define MSG_LEVEL_BED_DONE "Leveling Done!"
#define MSG_LEVEL_BED_CANCEL "Cancel"
. . .
#define MSG_HOME_OFFSETS_APPLIED "Offsets applied"
2016-04-05 07:24:07 +02:00
João Brázio
9240682630
Followup #3326 : Update DEFAULT_SOURCE_URL comment
2016-04-05 02:21:23 +01:00
Scott Lahteine
4b8a71055e
Merge pull request #3388 from thinkyhead/rc_fix_move_menu_bug
...
Fix: menu edit items saving position twice
2016-04-04 17:05:15 -07:00
Scott Lahteine
1220dfd5d6
Fix: menu edit items saving position twice
2016-04-04 16:36:04 -07:00
Scott Lahteine
b5920837ea
Merge pull request #3370 from esenapaj/patch-1
...
Drop DISABLE_M(IN|AX)_ENDSTOPS, replace with individual endstop flags
2016-04-04 16:12:50 -07:00
Scott Lahteine
53b397ab14
Merge pull request #3364 from jbrazio/script/find-missing-translations
...
Added a script to check all language files for missing translations
2016-04-04 16:10:36 -07:00
Scott Lahteine
d6fe454a13
Merge pull request #3386 from thinkyhead/rc_spanish_rebase
...
Add Missing Spanish translation
2016-04-04 16:07:34 -07:00
Scott Lahteine
2abea41c41
Merge pull request #3385 from thinkyhead/rc_dutch_translation
...
Update language_nl.h
2016-04-04 16:02:11 -07:00
RicardoGA
1bfaf57ee5
Add Missing Spanish translation
...
Add the missing translation (Spanish) issue #3353
2016-04-04 15:55:59 -07:00
paulusjacobus
4a4b797dca
Update language_nl.h
...
Added these messages with Dutch translation
#define MSG_BED_Z
#define MSG_A_TRAVEL
#define MSG_HEATING_FAILED_LCD
#define MSG_ERR_REDUNDANT_TEMP
#define MSG_THERMAL_RUNAWAY
#define MSG_ERR_MAXTEMP
#define MSG_ERR_MINTEMP
#define MSG_ERR_MAXTEMP_BED
#define MSG_ERR_MINTEMP_BED
#define MSG_HEATING
#define MSG_HEATING_COMPLETE
#define MSG_BED_HEATING
#define MSG_BED_DONE
2016-04-04 15:46:50 -07:00
Scott Lahteine
1ee903f30d
Merge pull request #3376 from gege2b/RCBugFix
...
French translation
2016-04-04 15:40:00 -07:00
Scott Lahteine
c5ff2c7d32
Merge pull request #3377 from clexpert/patch-1
...
Update language_cz.h
2016-04-04 15:39:44 -07:00
Scott Lahteine
99898ea652
Merge pull request #3379 from barus93/patch-2
...
Update language_it.h
2016-04-04 15:39:15 -07:00
Scott Lahteine
56e8e2b0eb
Final tweaks to M111 output
2016-04-04 15:36:07 -07:00
barus93
040a0c49db
Update language_it.h
...
ADD missing translation
2016-04-04 20:22:34 +02:00
Petr Zahradnik
8b843e997a
Update language_cz.h
2016-04-04 17:26:19 +02:00
Petr Zahradnik
3cd2beb750
Update language_cz.h
2016-04-04 16:54:26 +02:00
Gege2B
34bf9530c0
French translation
2016-04-04 16:45:06 +02:00
João Brázio
d819a4aff9
Fixes #3346 , followup #3343 : variables must defined with the static keyword to work with PROGMEM when defined inside functions
2016-04-04 15:02:18 +01:00
esenapaj
1326dc7258
Drop DISABLE_M(IN|AX)_ENDSTOPS, replace with individual endstop flags
...
This is follow-up the commit e5771346a4
2016-04-04 17:49:25 +09:00
Scott Lahteine
0433df3835
Merge pull request #3366 from jbrazio/translate/pt_PT
...
Added missing translations for pt_PT
2016-04-03 21:02:13 -07:00
João Brázio
dff6adfbca
Fixes #3361 : Added missing translations for pt_PT
2016-04-04 04:57:32 +01:00
Scott Lahteine
c0e7257932
Fix bug in new endstop pullups handling
2016-04-03 20:52:32 -07:00
João Brázio
f94900ee79
Added a script to check all language files for missing translations
2016-04-04 04:46:04 +01:00
Scott Lahteine
de39056f68
Merge pull request #3343 from thinkyhead/rc_fix_m111_output
...
Fix M111 output using pgm_read_word, as required
2016-04-03 17:44:38 -07:00
Scott Lahteine
fd0ac371b0
Fix M111 output using pgm_read_word as required
...
As noted by @taratata2016 in https://github.com/MarlinFirmware/Marlin/issues/3300#issuecomment-204687275
2016-04-03 17:33:06 -07:00
esenapaj
c4d7e0307c
Update Japanese translation
2016-04-04 09:11:23 +09:00
Scott Lahteine
c045ec8cb3
Merge pull request #3065 from thinkyhead/rc_doc_tweaks
...
Simplified endstop configuration
2016-04-03 17:05:47 -07:00
Scott Lahteine
d771174797
Merge pull request #3337 from esenapaj/patch-2
...
suppress warnings
2016-04-03 17:01:22 -07:00
Scott Lahteine
f2032cfcf6
Merge pull request #3341 from thinkyhead/rc_english_patch
...
Fix English definition for MSG_LEVEL_BED_CANCEL
2016-04-03 16:58:51 -07:00
Scott Lahteine
09c6f80c1e
Fix MSG_LEVEL_BED_CANCEL english
2016-04-03 16:41:27 -07:00
esenapaj
afe7d26543
Update Japanese translation
2016-04-03 16:39:37 -07:00
Scott Lahteine
3aee89b93a
Merge pull request #3338 from thinkyhead/rc_patches_april_3
...
Add history to LCD Menus, fix up Manual Bed Leveling
2016-04-03 16:37:39 -07:00
Scott Lahteine
7a2f73c6db
Remove extra comma from LCDHandlerAction
2016-04-03 16:27:30 -07:00
Scott Lahteine
3fbf67e5ce
Patch MBL feedback and event handling
2016-04-03 16:27:30 -07:00
Scott Lahteine
ef2fbaec98
Headings for menu sub-items, actions, etc.
2016-04-03 16:27:29 -07:00
Scott Lahteine
dc109ac4e2
Move MBL code to its logical place
2016-04-03 16:27:29 -07:00
Scott Lahteine
6730408ec1
Move lcd_autostart_sd to its logical place
2016-04-03 16:27:29 -07:00
Scott Lahteine
056b80dc53
Have "back" menu items go to the previous item
2016-04-03 16:27:29 -07:00
Scott Lahteine
c94482168b
Add MSG_LEVEL_BED_CANCEL for MBL
2016-04-03 16:27:29 -07:00
Scott Lahteine
877fb1f588
Account for MAX31855 in conditionals
2016-04-03 16:19:17 -07:00
Scott Lahteine
d24f14a799
Add HAS_TEMP_HOTEND define
2016-04-03 16:18:49 -07:00
esenapaj
f9e1a0ee6c
suppress warnings
2016-04-04 06:48:53 +09:00
Scott Lahteine
cf9a171aa9
Merge pull request #3330 from thinkyhead/rc_mbl_lcdDrawUpdate
...
Improvements to MBL, general LCD menu handling
2016-04-02 19:20:23 -07:00
Scott Lahteine
2b01649533
Move default machine info to pins files
2016-04-02 18:53:05 -07:00
Scott Lahteine
4f24323817
Split DEFAULT_MACHINE_NAME from DEFAULT_SOURCE_URL
...
Addressing #3325 – Avoid undefined symbol errors in the compiler.
2016-04-02 18:41:01 -07:00
Scott Lahteine
771ee1c1a9
Update MBL menu sub-function names
2016-04-02 18:20:47 -07:00
Scott Lahteine
d659777e70
Fix MBL to handle re-entrant calls
2016-04-02 18:14:49 -07:00
Scott Lahteine
5719fcba51
Add MSG_LEVEL_BED_DONE and MSG_LEVEL_BED_WAITING
2016-04-02 18:14:49 -07:00
Scott Lahteine
80b8fd1cad
Add MSG_HOME_OFFSETS_APPLIED
2016-04-02 18:14:49 -07:00
Scott Lahteine
d1c45ff80b
More user interaction in MBL
2016-04-02 18:14:49 -07:00
Scott Lahteine
240b71ee1c
Give names to lcdDrawUpdate values
2016-04-02 18:14:48 -07:00
Scott Lahteine
b0a3c7a91c
Add feedback sounds to MBL items
2016-04-02 17:08:43 -07:00
Scott Lahteine
782c598e66
Use ftostr43 with '+' option in MBL Z adjuster
2016-04-02 17:08:43 -07:00
Scott Lahteine
f08b0d034f
Merge pull request #3328 from RicardoGA/RC_Babystepping_fix
...
Babystepping Fix
2016-04-02 16:48:45 -07:00
Scott Lahteine
09437466b1
Merge pull request #3324 from tnw513/fix_filament_dia
...
changed DEFAULT_NOMINAL_FILAMENT_DIA for consistency between example config files
2016-04-02 16:40:24 -07:00
Scott Lahteine
2b4c42610c
Adjust SanityCheck messages
2016-04-02 16:39:23 -07:00
Scott Lahteine
a617d12f70
Account for Z_DUAL_ENDSTOPS in sanity checking of endstops
2016-04-02 16:39:23 -07:00
Scott Lahteine
868eebfdee
Simplify configuration of Z2 endstops
2016-04-02 16:39:23 -07:00
Scott Lahteine
e5771346a4
Drop DISABLE_M(IN|AX)_ENDSTOPS, replace with individual endstop flags
2016-04-02 16:39:23 -07:00
Scott Lahteine
071c742b8a
Move STRINGIFY to macros.h, use in language.h
2016-04-02 16:38:43 -07:00
Scott Lahteine
2ee599d873
Merge pull request #3321 from tnw513/fix_max_endstop
...
Max endstops disabled for stock Prusa i3 Hephestos.
2016-04-02 16:38:10 -07:00
Scott Lahteine
4e1bbdb89f
Merge pull request #3320 from alhirzel/RCBugFix
...
Fix manual Y movement on delta (regression).
2016-04-02 16:37:14 -07:00
Scott Lahteine
5fb88a2754
Merge pull request #3314 from jbrazio/bugfix/followup-3235
...
Fixes missing icons from status screen
2016-04-02 16:36:18 -07:00
Scott Lahteine
3c14c01a3a
Merge pull request #3310 from esenapaj/patch-2
...
Follow-up the commit a393941
2016-04-02 16:35:31 -07:00
RicardoGA
6b1d2263a2
Babystepping Fix
2016-04-02 14:53:57 -06:00
Silvio Didonna
dfe891fe11
changed filament diameter for consistency between all example config files.
2016-04-02 21:05:25 +02:00
Alexander Hirzel
6e0d627c8c
Unbreak the Delta radius clipping
2016-04-02 12:58:39 -04:00
Silvio Didonna
6c528e63eb
max endstops disabled. Stock Prusa i3 Hephestos have min endstops.
2016-04-02 16:54:59 +02:00
Alexander Hirzel
949172606f
Fix manual Y movement on delta (regression).
2016-04-02 10:48:13 -04:00
João Brázio
55a248d6b4
Fixes #3313 : Wrong board def in pins.h
2016-04-02 09:28:58 +01:00
João Brázio
04b2abb6aa
Fixes #3312 : Missing all icons from status screen
2016-04-02 06:50:02 +01:00
esenapaj
81593cb3cb
Follow-up the commit a393941
2016-04-02 11:23:33 +09:00
Scott Lahteine
6a245fe4f7
Release 1.1.0-RC5
2016-04-01 19:14:49 -07:00
Scott Lahteine
e8f8a46ef5
Merge pull request #3303 from thinkyhead/rc_various_fixes
...
Various patches for LCD menu issues
2016-04-01 18:02:25 -07:00
Scott Lahteine
b98f72b483
Small optimization for ftostr43
2016-04-01 17:54:16 -07:00
Scott Lahteine
a393941d2d
Combine "XYZ" with MSG_LEVEL_BED_HOMING
2016-04-01 17:51:03 -07:00
Scott Lahteine
097cc75ba8
Patch _lcd_level_bed draw to fix flicker, show proper offset
2016-04-01 17:51:03 -07:00
Scott Lahteine
1e1a18e091
Remove extra semicolon in ultralcd.cpp
2016-04-01 17:51:03 -07:00
Scott Lahteine
0b4f65dca8
Always limit blink to ~1 second intervals
2016-04-01 17:51:03 -07:00
Scott Lahteine
ffe054c129
Fix comment about host keepalive interval
2016-04-01 17:28:08 -07:00
Scott Lahteine
0d6609c3c5
lcd_goto_menu should set lcdDrawUpdate to 2
2016-04-01 17:07:40 -07:00
Scott Lahteine
af89ccf96a
Use flag to defer lcd return-to-status
2016-04-01 17:07:39 -07:00
Scott Lahteine
641b30217e
Patch prevEncoderPosition compile issue
...
Thanks to @jbrazio #3301
2016-04-01 17:07:39 -07:00
Scott Lahteine
41aa4bdf1f
Use XYZ translated strings in dogm
2016-04-01 17:07:39 -07:00
Scott Lahteine
92882fcc51
Allow lcd_implementation_drawedit to draw a message
2016-04-01 17:04:33 -07:00
Scott Lahteine
0114cf1101
RCBugFix version string
2016-04-01 17:04:33 -07:00
Scott Lahteine
9c43369ebb
Merge pull request #3306 from thinkyhead/rc_fix_num2str
...
Clean up num2str functions, extend ftostr43
2016-04-01 17:04:03 -07:00
Scott Lahteine
1da9d10173
Support for MKS v1.3/1.4 and Sainsmart RAMPS 1.4 variants
2016-04-01 16:54:35 -07:00
Scott Lahteine
fcedfd6e99
Clean up num2str functions, extend ftostr43
2016-04-01 16:52:59 -07:00
Scott Lahteine
2512d8fd5e
Merge pull request #3304 from thinkyhead/rc_slow_buttons
...
Macros for buttons, some cleanup for slow buttons
2016-04-01 15:31:54 -07:00
Scott Lahteine
f543aaa54e
Apply standard pin test to buttons
...
This is the easiest way to make button pin testing consistent without
renaming all the button pins. Just make a macro especially for testing
if button pins are set, since they are named consistently in the pins
files.
2016-04-01 15:12:12 -07:00
Scott Lahteine
f2ffc8b28b
Rename local slow_buttons for clarity
2016-04-01 15:06:33 -07:00
Scott Lahteine
26279fa43c
Merge pull request #3289 from esenapaj/patch-1
...
Update Kana font
2016-04-01 14:31:32 -07:00
Scott Lahteine
0bee67e5f1
Merge pull request #3294 from jbrazio/bugfix/mandatory-extrude-mintemp
...
Fix an error when EXTRUDE_MINTEMP is not defined
2016-04-01 14:23:32 -07:00
João Brázio
709dd5aa4d
Fix an error when EXTRUDE_MINTEMP is not defined
2016-03-31 16:25:48 +01:00
Scott Lahteine
bc86ee0271
Simplify homeaxis with some macros
2016-03-30 18:44:05 -07:00
esenapaj
cc5059478a
Update Kana font
2016-03-31 10:02:47 +09:00
Scott Lahteine
82ef101ed5
Deploy & Stow in G29 for Delta + Z Servo Endstop
2016-03-30 16:41:16 -07:00
Scott Lahteine
33a9d32800
Merge pull request #3285 from thinkyhead/rc_fix_drawedit
...
Fix string issues in ultralcd.cpp
2016-03-30 13:01:07 -07:00
Scott Lahteine
6a4d394fff
Fix pointer-to-string issues with set_home_offsets and _lcd_level_bed_homing
2016-03-30 12:32:25 -07:00
Scott Lahteine
de333c4fea
Merge pull request #3279 from thinkyhead/rc_filament_width_sensor
...
FILAMENT_SENSOR -> FILAMENT_WIDTH_SENSOR
2016-03-30 12:16:27 -07:00
Scott Lahteine
0f835c0c4e
Merge pull request #3259 from jbrazio/bugfix/old-ide-warning
...
Show a warning message when Arduino IDE is prior to 1.5
2016-03-30 12:15:51 -07:00
Scott Lahteine
8def2c31db
Merge pull request #3284 from thinkyhead/rc_stop_watchheat_lcdset0
...
Fix temperature checking conditions (backwards!)
2016-03-30 12:10:39 -07:00
Scott Lahteine
b919a6f182
Merge pull request #3280 from esenapaj/patch-1
...
Update U8glib URL
2016-03-30 12:06:53 -07:00
Scott Lahteine
8bf5f7c676
Merge pull request #3282 from jbrazio/bugfix/m104-timer-wont-start
...
M104 not starting the print timer
2016-03-30 11:54:16 -07:00
Scott Lahteine
31450ad498
Fix temperature checking conditions (backwards!)
2016-03-30 11:52:03 -07:00
João Brázio
187c183c20
M104 was not starting the print timer
2016-03-30 11:33:24 +01:00
esenapaj
352294b5f5
Update U8glib URL
2016-03-30 14:26:28 +09:00
Scott Lahteine
507aef055f
Patch broken M404
2016-03-29 20:54:31 -07:00
Scott Lahteine
1a79b13b7a
FILAMENT_SENSOR -> FILAMENT_WIDTH_SENSOR
2016-03-29 20:54:31 -07:00
Scott Lahteine
7f81aa7ff3
Pins should always be defined (even for disabled features)
2016-03-29 20:44:14 -07:00
Scott Lahteine
5f32184254
Merge pull request #3278 from thinkyhead/rc_cleanup_m111_redo
...
Echo all debug levels in M111, default to DEBUG_NONE
2016-03-29 20:34:31 -07:00
Scott Lahteine
05765fb570
Add DEBUGGING macro
2016-03-29 19:50:01 -07:00
Scott Lahteine
4402760739
Echo all debug levels in M111, default to DEBUG_NONE
...
Redo of #3268 by @jbrazio
2016-03-29 19:18:45 -07:00
Scott Lahteine
f0b96f5cae
Merge pull request #3276 from thinkyhead/rc_sdprint_and_lcd_sleuth
...
Refinements, fixes, reduced stack usage in CardReader
2016-03-29 18:30:18 -07:00
Scott Lahteine
12c0bf9521
Merge pull request #3277 from jbrazio/bugfix/m190-temp-never-reached
...
M190 bed temp is never reached
2016-03-29 18:28:51 -07:00
João Brázio
c6577aea60
M190 bed temp was never reached
2016-03-30 01:03:20 +01:00
Scott Lahteine
ce0a9d3dc6
A picky fix of indentation in cardreader.cpp
2016-03-29 16:23:12 -07:00
Scott Lahteine
4ed8351e3d
Revert use of enqueue_and_echo_command_now
2016-03-29 16:23:12 -07:00
Scott Lahteine
70d1d4de5f
Small code spacing adjustments
2016-03-29 03:19:27 -07:00
Scott Lahteine
0385acea7a
Fix workDirParents -> getAbsFilename relationship
2016-03-29 03:18:53 -07:00
Scott Lahteine
27d70599d4
Change openFile default to "not-push" instead of "do-replace"
2016-03-29 03:16:35 -07:00
Scott Lahteine
372f93cc7a
Rename "filenames" to "proc_filenames"
2016-03-29 03:15:01 -07:00
Scott Lahteine
6b01cf07c2
Use only as much stack as needed for the M23 command
2016-03-29 02:34:33 -07:00
Scott Lahteine
9e520ae319
Merge pull request #3272 from thinkyhead/rc_filament_sensor_scope
...
Minor cleanup to filament sensor code
2016-03-28 20:51:46 -07:00
Scott Lahteine
3252df7998
Minor cleanup to filament sensor code
2016-03-28 20:04:34 -07:00
Scott Lahteine
b60ea95adf
Keep blinking limited to LCD_UPDATE_INTERVAL
2016-03-28 19:41:13 -07:00
Scott Lahteine
e0ab06cfae
Merge pull request #3267 from thinkyhead/rc_command_args_null_oooops
...
Cleanup, simplification of command dispatcher code
2016-03-28 18:54:00 -07:00
Scott Lahteine
0b8ef5eba6
Split get_command into units, rename to get_available_commands
2016-03-28 06:00:04 -07:00
Scott Lahteine
545f7997ea
Continue on empty lines instead of returning
2016-03-28 05:37:36 -07:00
Scott Lahteine
3dcf6d42ff
Don't store escaped serial characters if comment_mode
2016-03-28 05:37:36 -07:00
Scott Lahteine
5f8e52aefb
Minor cleanup to command dispatcher
2016-03-28 05:37:36 -07:00
jbrazio
0880fecbd4
Show a warning message when Arduino IDE is prior to 1.5
2016-03-28 11:55:42 +01:00
Scott Lahteine
f1ed310322
Add NUMERIC compare macros to simplify code
2016-03-28 03:52:49 -07:00
Scott Lahteine
3b2d159abd
Relax the test for "Heating failed" errors
2016-03-27 07:02:10 -07:00
Scott Lahteine
2e4ddd5c22
Merge pull request #3260 from jbrazio/cleanup/standardize-comment-style
...
Formatted multi-line comments
2016-03-26 21:42:33 -07:00
