ManuelMcLure
492883859e
Don't protect unused CS pins ( #13647 )
2019-04-10 21:57:57 -05:00
Scott Lahteine
9898f53361
Fix missing IS_SD_PRINTING
2019-04-10 21:48:16 -05:00
Scott Lahteine
1e59a2ac73
Hide pause/stop unless active printing
2019-04-10 19:46:59 -05:00
Scott Lahteine
ae42206500
Fix SD_REPRINT_LAST_SELECTED_FILE
2019-04-10 17:43:08 -05:00
Scott Lahteine
d72946a8d7
Fix LPC1768 build with no watchdog
...
Fix issue mentioned at https://github.com/MarlinFirmware/Marlin/pull/13587#issuecomment-481737509
2019-04-10 17:34:15 -05:00
Scott Lahteine
cee3b172b9
Fix Marlin splash screen logic ( #13646 )
2019-04-10 17:14:57 -05:00
ANMay-ru
052f2ac352
Fix RURAMPS4D baud rate ( #13644 )
2019-04-10 15:53:21 -05:00
Marcio Teixeira
e6ebd30f60
Fix LCD issue on stepper timeout ( #13630 )
...
- Remove a re-paint of the status screen on stepper timeout, which would cause a garbled LCD with `LIGHTWEIGHT_UI` and could interrupt whatever else the user might be doing in a submenu (such as playing games!)
- Use the helper function to reset stepper timeout.
2019-04-10 15:51:48 -05:00
klcjr89
a8edd4f6d4
Fix Azteeg X5 MINI BOARD_NAME ( #13632 )
...
Co-Authored-By: klcjr89 <klcjr89@users.noreply.github.com>
2019-04-10 15:46:12 -05:00
Scott Lahteine
5018fdacbe
Support FYSETC_MINI_12864_PANEL ( #13365 )
2019-04-09 18:34:29 -05:00
InsanityAutomation
4900c28bf6
Fix IDEX tool-change, and more ( #13614 )
2019-04-09 18:33:40 -05:00
InsanityAutomation
ba31d39f6d
Azteeg X5 Mini support ( #13425 )
2019-04-08 23:10:45 -05:00
Scott Lahteine
9cb5c57b84
Adjustments to ui8tostr_percent
2019-04-08 21:47:50 -05:00
Scott Lahteine
321a5e6580
Fix SD card reselect when scrolled ( #13624 )
...
- Change encoder position to 16-bit integer.
- Fix `SD_REPRINT_LAST_SELECTED_FILE` when the screen is scrolled.
2019-04-08 21:10:41 -05:00
Scott Lahteine
0e3c9e726d
Set default Raptor runout/caselight pins
2019-04-08 18:18:08 -05:00
Scott Lahteine
5e38d70697
Fix M217 report label, general cleanup
2019-04-08 18:18:08 -05:00
Scott Lahteine
fae2b7edc3
Update MMU2 code style
2019-04-08 18:13:42 -05:00
Scott Lahteine
c8a83fb122
SPINDLE_LASER_ENABLE => SPINDLE_LASER_ENA
2019-04-08 18:13:41 -05:00
Scott Lahteine
9abe9aff56
Confirm before starting SD print ( #13616 )
2019-04-08 13:44:35 -05:00
Scott Lahteine
7e0008f5b3
Fix SETCURSOR_RJ
2019-04-07 20:25:54 -05:00
Robby Candra
81c2c3ec11
Continuous filename scrolling ( #13609 )
2019-04-07 16:58:32 -05:00
Ludy
c29820f649
Suppress compile warning ( #13612 )
2019-04-07 16:53:30 -05:00
Scott Lahteine
a2b3ad6d0a
Don't override RGB LED pins, by default
2019-04-07 16:42:26 -05:00
Bob Kuhn
9a56d90150
Fix M43 on LPC176x ( #13587 )
...
The real fix. PR #13568 was wrong.
2019-04-06 18:06:07 -05:00
Roxy-3D
9cee81d47e
Option to show babysteps total since G28 ( #13580 )
2019-04-06 18:04:34 -05:00
Scott Lahteine
3221658a78
Adjust park position description
2019-04-05 20:40:50 -05:00
Scott Lahteine
028b78f623
Suppress a compile warning
2019-04-05 20:06:19 -05:00
Scott Lahteine
cf12fc8366
Expand on serial debugging ( #13577 )
2019-04-05 20:02:46 -05:00
Marcio Teixeira
bf7b28b456
Fix incorrect variable name ( #13585 )
2019-04-05 19:04:46 -05:00
Kajetan Rzepecki
27693cec29
Extend ESP32 HardwareSerial with flushTX. ( #13588 )
2019-04-05 19:04:02 -05:00
Alexander Gavrilenko
3c47e1b4d1
Support Black STM32F407VET6 with RAMPS-like shield ( #13524 )
2019-04-05 15:30:19 -05:00
VBen
0dfd76ba55
Fix Z hotend offset broken by parking extruder tool change ( #13582 )
2019-04-05 15:28:32 -05:00
Scott Lahteine
027a901bec
Trim whitespace
2019-04-05 15:04:23 -05:00
Kajetan Rzepecki
692a0198f9
Fix SPISettings frequency parameters in ESP32 HW SPI ( #13573 )
2019-04-04 23:17:14 -05:00
Kajetan Rzepecki
63d95862fa
Add FastIO TOGGLE for ESP32 ( #13574 )
2019-04-04 23:15:17 -05:00
drzejkopf
0992d1a4c8
Fix Invaders game compile error ( #13575 )
2019-04-04 23:13:11 -05:00
Robby Candra
cd1ef33c8c
Drop extra PLR save test ( #13554 )
2019-04-04 22:47:00 -05:00
Scott Lahteine
72c7751768
Fix SERIAL_POS in use with DEBUG_OUT
2019-04-04 22:12:03 -05:00
Scott Lahteine
cacec5764a
Clean up whitespace
2019-04-04 22:12:02 -05:00
Scott Lahteine
83e214478e
Click-hold to exit Invaders, fix Brickout compile
2019-04-04 17:07:50 -05:00
Scott Lahteine
240ea1bbb3
Split up games into separate files
2019-04-04 03:06:19 -05:00
Marcio Teixeira
27a4927ed1
Add option to move away from endstop after homing. ( #13557 )
...
Add option to move away from endstop after homing.
- Add `ENDSTOP_BACKOFF` for printers with a recessed Z home button (Lulzbot TAZ 6).
- Also prevents chattering when sensorless homing with axes against bumpers.
2019-04-04 02:47:19 -05:00
InsanityAutomation
d44e5b1fde
Fix stepper direction macros, multi-nozzle scope ( #13569 )
2019-04-04 02:44:07 -05:00
Scott Lahteine
10b9632bed
Fix menu history item selection
2019-04-04 02:41:23 -05:00
Scott Lahteine
f1810689ff
Fix bootscreen condition
2019-04-04 00:19:47 -05:00
Kajetan Rzepecki
b21ca53dfc
SPIFFS-backed PersistentStore for ESP32 ( #13566 )
2019-04-03 20:28:26 -05:00
Scott Lahteine
af92ee9dd6
No PLR include needed in queue.cpp
2019-04-03 18:26:31 -05:00
Scott Lahteine
5d2c5877f7
DOGM bootscreen cleanup
2019-04-03 18:10:50 -05:00
Scott Lahteine
2aa35e95af
More G26 arc cleanup
...
Followup to #13531
2019-04-03 16:03:21 -05:00
Scott Lahteine
20a41e2f7b
SDCARD_RATHERRECENTFIRST with SDCARD_SORT_ALPHA
2019-04-02 22:25:18 -05:00
Robby Candra
46445a5a16
Event G-code for Stop SD Print ( #13547 )
...
Co-Authored-By: 7eggert <7eggert@gmx.de>
Co-Authored-By: robbycandra <robbycandra.mail@gmail.com>
2019-04-02 22:09:30 -05:00
Kajetan Rzepecki
2cfa9e9008
Fixed chamber-related compile error ( #13552 )
2019-04-01 17:53:56 -05:00
Scott Lahteine
a0a5c31c05
Power-Loss initialization fix ( #13553 )
...
- Only save to PLR file on moves with E and X or Y
- Save to PLR after any long-ish Z downward move
2019-04-01 17:52:45 -05:00
Scott Lahteine
8b7c3eec83
Games, for fun (and stress-testing) ( #13464 )
2019-04-01 17:48:54 -05:00
InsanityAutomation
fbc7b51a24
Use NO_FETCH for Dual X G28 ( #13539 )
2019-04-01 17:48:21 -05:00
Scott Lahteine
5de7b5b35e
Games, for fun (and stress-testing) ( #13464 )
2019-04-01 15:43:48 -05:00
InsanityAutomation
4961d8aa3e
Update G28.cpp ( #13539 )
2019-03-31 19:50:40 -05:00
Scott Lahteine
de0046fc8b
Fix empty HAS_TIMER macros
2019-03-30 23:04:40 -05:00
Kajetan Rzepecki
c9079165ee
Fix MAX6675 readout with Hardware SPI ( #13530 )
2019-03-30 22:31:49 -05:00
ManuelMcLure
04086fc455
Minor optimization to ARC_SUPPORT code ( #13531 )
2019-03-30 22:29:37 -05:00
Robby Candra
a3f67acd6d
Fix Power Loss Recovery file delete ( #13522 )
2019-03-30 13:14:58 -05:00
Marcio Teixeira
d992dfe7d5
Use the percent util func in the string func. ( #13523 )
2019-03-30 13:00:31 -05:00
drzejkopf
b1f739e27b
CR10_STOCKDISPLAY support in Bigtreetech SKR ( #13516 )
2019-03-29 14:19:18 -05:00
Marcio Teixeira
5679fae11e
UltraLCD enhancements (lower fan resolution, backlash menu) ( #13519 )
2019-03-29 14:07:43 -05:00
Msq001
f0d14b83bc
Save/restore Relative modes in Power-Loss Recovery ( #13501 )
2019-03-29 13:40:42 -05:00
Marcio Teixeira
c6466c23fe
Silence signed/unsigned comparison warning. ( #13508 )
2019-03-29 13:33:45 -05:00
InsanityAutomation
7240e3a68f
Allow G26 with no heated bed ( #13511 )
2019-03-29 13:32:43 -05:00
Alexander Gavrilenko
6d9aaca082
Fix compilation error for MKS Robin ( #13506 )
2019-03-29 12:40:24 -05:00
Scott Alfter
c6dbe6e9d6
Fix Teensy 3.5/3.6 __get_primask ( #13514 )
2019-03-29 12:23:09 -05:00
Alexander Amelkin
e40636a7c1
Replace digitalPinHasPWM with HAS_TIMER ( #13520 )
2019-03-29 12:21:14 -05:00
Scott Lahteine
b46ca9aa94
Less timely comment, tweak conditions
2019-03-26 19:20:13 -05:00
InsanityAutomation
eb91f08725
Update descriptions and dont call unneeded functions
2019-03-26 11:24:52 -04:00
Ludy
fe346cd4d1
Fix DEBUG_EEPROM_READWRITE compile error ( #13492 )
2019-03-26 04:12:22 -05:00
Sam Lane
e3ab54753b
Add extra Linear Advance factors ( #13490 )
2019-03-26 04:02:27 -05:00
Chris Pepper
ffc2c2d7c5
Move FAST_PWM_FAN code to HALs ( #13491 )
2019-03-26 01:03:23 -05:00
Thomas Moore
263f8edff8
Disable volumetric extrusion during G26 ( #13479 )
2019-03-25 22:41:52 -05:00
Bob Kuhn
6bd0a0be97
Relocate DUE Stepper ISR to TC0,2 ( #13481 )
2019-03-25 22:39:51 -05:00
Thomas Moore
13a12f8a87
Fix UBL mesh editor on delta ( #13478 )
2019-03-25 22:04:57 -05:00
Scott Lahteine
d2e0c03afb
Remove trailing whitespace
2019-03-25 20:51:38 -05:00
Marcio Teixeira
7462fe3068
Fix compile error, squelch warnings ( #13487 )
...
- Fix path to `bedlevel.h` include file
- Add default to `case` statements to suppress warnings
2019-03-25 20:41:38 -05:00
Yannik Sembritzki
0d3ea59bcf
Add pins for Dual Z UART on SKR 1.3 ( #13474 )
...
Fix #13470
2019-03-24 20:09:00 -05:00
pinchies
ef3b93daa1
Fix STM32F1 SD-based EEPROM emulation ( #13475 )
...
If `openFile` is given `true`, then it has read-only access. Because all the writing occurs on the next line, this breaks SD card as EEPROM.
2019-03-24 20:07:31 -05:00
Chris Pepper
aacc1148b0
Fix M106 for index > extruders ( #13473 )
2019-03-24 20:03:53 -05:00
Thomas Moore
c5e96544b5
Fix vtool compiler warning ( #13476 )
2019-03-24 20:02:28 -05:00
Thomas Moore
02dc72acb6
Disable ABL when leveling corners ( #13471 )
2019-03-24 20:01:18 -05:00
7eggert
d96f7d6068
Minimum segments for G2/G3. Better for small arcs. ( #13466 )
2019-03-24 19:53:47 -05:00
Scott Lahteine
380c771988
Handle word-padded flash-based eeprom (STM32F1)
...
Fix #13445
2019-03-24 19:14:04 -05:00
Scott Alfter
32332bcd03
Proceed with Teensy 3.5/3.6 HAL ( #13450 )
2019-03-24 00:08:32 -05:00
Scott Alfter
407202cc0f
Fix BLTouch pre-3.0 compatibility ( #13454 )
2019-03-23 23:28:15 -05:00
Marcio Teixeira
a0ca98f699
Additional ExtUI features ( #13449 )
2019-03-23 23:09:18 -05:00
Sam Lane
a8fa275dc6
Fix Fan 0 responding to all fan speeds ( #13444 )
2019-03-23 23:00:31 -05:00
InsanityAutomation
5eeffab5e5
Fix BLTouch Menus ( #13441 )
2019-03-23 22:58:34 -05:00
Scott Lahteine
d8329d858d
Default argument to defer_status_screen
2019-03-23 16:33:37 -05:00
Giuliano Zaro
9562a02c5a
Update Italian language ( #13440 )
2019-03-20 18:26:55 -05:00
drzejkopf
70e6a3db8a
Add LEVEL_CORNERS_HEIGHT to LEVEL_BED_CORNERS ( #13439 )
2019-03-20 18:26:12 -05:00
Roman Moravčík
f3cf95a937
Update Slovak language. ( #13435 )
2019-03-20 16:37:34 -05:00
Scott Lahteine
144018736a
Use USES_Z_MIN_PROBE_ENDSTOP
2019-03-18 16:58:31 -05:00
InsanityAutomation
5b2c37d6c1
Followup to BLTouch ( #13422 )
2019-03-18 16:31:11 -05:00
InsanityAutomation
3fb8489ae3
EXTUI and UBL compilation fixes ( #13420 )
2019-03-17 07:57:54 -05:00
Scott Lahteine
b376c7e374
Group DISABLED items
2019-03-17 07:56:35 -05:00
Scott Lahteine
58bca67883
Unify status scrolling further
2019-03-17 07:56:35 -05:00
Scott Lahteine
c4443f885e
finishstatus => finish_status
2019-03-17 07:56:35 -05:00
InsanityAutomation
691e5c3bb8
BLTouch V3.0 support ( #13406 )
2019-03-17 05:57:25 -05:00
Scott Lahteine
49cf92dc36
Extended condition macros ( #13419 )
...
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
2019-03-16 23:43:06 -05:00
Tobias Frost
d20eab4f83
Fix macro in set_color() ( #13417 )
2019-03-16 19:05:59 -05:00
Ludy
59353546e8
Fix BUTTON_EXISTS and misplaced comma ( #13411 )
...
Fixes #13410 and redeclaration of `BUTTON_EXISTS`
2019-03-16 11:59:12 -05:00
InsanityAutomation
09eb30dc05
IDEX Mirror mode based on Formbot / Vivedino Symmetric mode ( #13404 )
2019-03-15 22:46:27 -05:00
Scott Lahteine
5c1aa5162d
Adjust M206 output in M503 for DELTA
2019-03-15 19:20:40 -05:00
Scott Lahteine
ad8b82d054
Fix KILL_PIN assignment for MKS_MINI_12864
...
According to #13397
2019-03-15 19:20:40 -05:00
Scott Lahteine
3a916b4ef2
Create bresenham.h
2019-03-15 19:20:39 -05:00
Karl Andersson
5d3928cb01
PWM is not defined on Arduino Core STM32 ( #13405 )
2019-03-15 19:14:06 -05:00
Scott Lahteine
9a515cbd32
Fix Pause Print message and behavior ( #13394 )
2019-03-14 02:26:07 -05:00
Scott Lahteine
f5bcc00570
Unify debugging output with debug_out.h ( #13388 )
2019-03-14 02:25:42 -05:00
Andrei Pozolotin
cc8a871705
Add capability string CHAMBER_TEMPERATURE ( #13391 )
...
Reference: #13380
2019-03-13 18:09:22 -05:00
Scott Lahteine
67bee06e43
No patch needed for non-libmaple analogWrite
...
See https://github.com/pinchies/Marlin/pull/1#issuecomment-471388743
2019-03-13 07:21:10 -05:00
Scott Lahteine
f89b375fb9
Fixes and improvements for PWM pins ( #13383 )
2019-03-13 06:51:15 -05:00
Scott Lahteine
87162658c4
Fix and improve software endstops ( #13386 )
2019-03-13 05:48:36 -05:00
Scott Lahteine
6214c997c0
Remove includes of <binary.h>
2019-03-13 05:32:33 -05:00
Scott Lahteine
4555ae448f
Fixups for ESP32
2019-03-13 05:32:33 -05:00
Scott Lahteine
a5ea3e2f15
Fix hotend offset on switching toolhead change
...
See commentary at #11623
2019-03-13 05:32:21 -05:00
jmz52
8e0ac93d60
Fix 'UNUSED redefined' compiler warning ( #13387 )
2019-03-13 04:34:02 -05:00
Hadrien Jouet
0278ad0a6d
Add ESP32 WiFi interface ( #11209 )
2019-03-13 00:48:08 -05:00
InsanityAutomation
c03df89921
ExtUI Mesh Leveling Extensions ( #13363 )
2019-03-13 00:45:52 -05:00
InsanityAutomation
050eac03af
Single X Duplication Extension ( #13373 )
...
* Multi-nozzle selective duplication
* Use a bit-mask, reduce stepper_indirection.h size
* Tweak the multi-nozzle duplication description
* Use 'S' as a bool in M605
* Add HAS_DUPLICATION_MODE conditional
* Remove '_MODE' from the option name
* M605 in the style of Stacker M280
* Also include direct mask style (P)
2019-03-13 00:42:50 -05:00
Scott Lahteine
ad91476d26
Fix USEABLE_HARDWARE_PWM
2019-03-13 00:12:46 -05:00
Scott Lahteine
d63da4592d
Tweak to SCARA_move_to_cal
2019-03-12 22:06:50 -05:00
Scott Lahteine
51ff5b68fa
Clean up fastIO ahead of PWM patch
2019-03-12 20:39:55 -05:00
Scott Lahteine
388babbcea
Tweak SERIAL_PRINTF
2019-03-11 20:58:27 -05:00
Scott Lahteine
d94e077901
Apply HAS_HOTEND_OFFSET where needed
2019-03-11 20:58:27 -05:00
Scott Lahteine
11d6a939df
Always define axis_unhomed_err
2019-03-11 20:58:27 -05:00
7eggert
10c8c034bd
Allow both encoder and ADC keypad ( #13355 )
2019-03-11 18:10:56 -05:00
Andrei Pozolotin
31ff7da7ac
Add missing CHAMBER options (for M141) ( #13371 )
2019-03-11 16:50:07 -05:00
Scott Lahteine
0375e92847
Followup to serial rework
...
As mentioned in #13370
2019-03-11 16:46:04 -05:00
jmz52
013bb469ca
Fix compilation for STM32F1 with no SDIO ( #13366 )
2019-03-11 16:40:51 -05:00
Scott Lahteine
e52bcc9408
Limit top bed temp to BED_MAXTEMP - 10
...
The chances of a 10° overshoot is pretty minimal.
2019-03-11 16:32:34 -05:00
Scott Lahteine
98b55421a5
Clean up some temp config
2019-03-11 16:31:23 -05:00
InsanityAutomation
785a7028bf
Followup to 'volatile' patch ( #13369 )
...
Originally #13344
2019-03-11 15:01:57 -05:00
Scott Lahteine
aa1d587128
Some LCD code cleanup
2019-03-11 05:07:31 -05:00
Scott Lahteine
fa11427ec6
Remove obsolete LCD_CONTRAST
2019-03-11 03:33:07 -05:00
pinchies
4df9509ead
Add support for printers with inverted fan pins ( #13362 )
...
Add support for printers with inverted fan pins by adding `#define FAN_INVERTING 1` to `Configuration_adv.h` and modifying the fan write macros.
2019-03-10 20:51:21 -05:00
Scott Lahteine
1f7e220387
Make HAL ISR macros function-like
2019-03-10 20:44:27 -05:00
Scott Lahteine
e3ce346f24
Report position to host in Nozzle::park
2019-03-10 19:09:28 -05:00
Scott Lahteine
77b4176152
Use lib include for bit_constants.h
2019-03-10 19:09:28 -05:00
Scott Lahteine
3419099f0a
Clean up whitespace
2019-03-10 19:09:28 -05:00
pinchies
4c43e6c48b
Fix "spontaneous heating" issue (WRITE bug) on STM32 ( #13356 )
...
Should fix "spontanous heating" problems due to order of operations error. Error occurs at least with ststm32 v5.1.0 in PlatformIO.
2019-03-10 17:25:54 -05:00
Michiel Baird
b824a517aa
Add G38.4 and G38.5 ( #13348 )
2019-03-10 17:22:09 -05:00
Bruce j Beare
e4d080e63c
Reset after kill with a button on the KILL_PIN ( #13091 )
2019-03-10 09:57:38 -05:00
MoellerDi
c36989c39e
Fix chamber temperature measurement ( #13350 )
2019-03-10 09:51:13 -05:00
Scott Lahteine
12503fce06
Followup to wait_for_user fix
2019-03-10 09:14:02 -05:00
Scott Lahteine
33a08fc6f7
Fix typos from temperature rework
...
Followup to #12201
2019-03-10 08:28:16 -05:00
Tobias Frost
2efbcc90c5
Fix wait_for_user compile error ( #13352 )
2019-03-10 08:07:41 -05:00
Tobias Frost
60e82e3929
Send notifications to ExtUI for M0/M1 ( #13344 )
...
- Send notifications to ExtUI for M0/M1
- wait_for_user can be non-volatile (not changed by interrupt)
C / C++ compilers don't optimize away reads of non-volatile variables when a function call is used between accesses, because *any* variable could be changed by the function call. Since `wait_for_user` can't be changed without a function call, it should be non-volatile so the compiler can optimize away cases where it is read more than once without an intervening function call.
2019-03-09 14:20:37 -06:00
Marcio Teixeira
00fc43144a
Follow up fixes to various PRs. ( #13334 )
...
- Ensure `MarlinUI:get_progress` is defined for `ExtUI`.
- Fix for `BACKLASH_SMOOTHING` with small segments.
`BACKLASH_SMOOTHING` with extremely small segments failed to fully correct due to the correction factor being rounded down. Rounding up ensures the entire backlash will converge to zero even for small segments.
- Add pinout for the beta revision `EINSY_RETRO`.
- Update soft endstops with tool offsets (for toolchange et. al. move clamping) (#12568 )
2019-03-09 14:20:37 -06:00
Scott Lahteine
c7d618b4d9
Fix SERIAL_ECHOLNPAIR
...
Fix #13333
2019-03-09 14:20:37 -06:00
InsanityAutomation
d54741eda8
Update some G26 plausible values. Add speed control. ( #13330 )
2019-03-08 03:13:44 -06:00
Msq001
fb3302feda
Fix STM32F1 Serial and ADC pins ( #13331 )
2019-03-08 02:21:32 -06:00
Reece Kibble
dbead66988
Allows user to set (almost) any PWM frequency ( #12638 )
2019-03-08 02:15:42 -06:00
Tobias Frost
afbec5ff7e
Have ExtUI::getProgress use ui.get_progress ( #13328 )
2019-03-07 18:00:38 -06:00
3dlabsio
645ca7af7a
M141 Heated Chamber, Temperature rework ( #12201 )
2019-03-07 02:09:39 -06:00
Scott Lahteine
44571775bd
Further support for 6 extruders
2019-03-07 01:00:56 -06:00
Scott Lahteine
893ee68b52
Clean up trailing whitespace
2019-03-06 01:02:43 -06:00
Scott Lahteine
39f1222060
One fewer G29 error string
2019-03-05 23:04:52 -06:00
Scott Lahteine
cfdb38eda4
Allow SERIAL_ECHOPAIR to take up to 12 pairs ( #13311 )
2019-03-05 06:46:19 -06:00
Scott Lahteine
4771e372a1
Update criteria for PAUSE/RESUME/STOP menu items ( #13294 )
2019-03-05 06:46:06 -06:00
Tobias Frost
56fdcf93d1
Disallow SD_DETECT_INVERTED with FYSETC F6. ( #13307 )
2019-03-05 06:45:28 -06:00
Tobias Frost
7ce13a6ec1
Fix a print_job_timer compile error ( #13304 )
2019-03-05 06:39:15 -06:00
Tobias Frost
6df51201ae
Include EXTENSIBLE_UI in single LCD sanity check ( #13306 )
2019-03-05 06:33:36 -06:00
Scott Lahteine
2e5a3b01fd
Save Power Loss Recovery only on move commands
2019-03-05 02:43:29 -06:00
Scott Lahteine
15738ea506
Update a motion comment
2019-03-05 00:50:29 -06:00
Scott Lahteine
bc87e97357
Prevent a tool change move out of bounds
2019-03-05 00:50:29 -06:00
Scott Lahteine
2212da453a
Distinguish between analog/digital auto fans ( #13298 )
2019-03-05 00:41:31 -06:00
Chris Pepper
2513f6b550
Fix multiport G28 with Binary Transfer ( #13308 )
2019-03-04 16:44:54 +00:00
Chris Pepper
38bef9da91
Report auto temp to both serial ports, if available ( #13301 )
2019-03-03 21:03:48 -06:00
Robert Mendon
367d392880
Init stepper current after stepper pins are set up ( #13302 )
2019-03-03 20:58:02 -06:00
InsanityAutomation
bf8b38e0f7
Relocate configs above Marlin/src folder ( #13299 )
2019-03-03 16:50:56 -06:00
Scott Lahteine
d71dc5cf42
Fix for Ender 4 fan/case light pin
...
See #12731
2019-03-03 07:43:27 -06:00
Anthony Rich
7640b328df
Support for Tronxy X5S 2e ( #13297 )
2019-03-03 07:41:05 -06:00
Scott Lahteine
599cdc3f0f
Remove dead code from get_pid_output
...
See #12981
2019-03-03 05:45:20 -06:00
Scott Lahteine
35ae5daf2d
Split up sdcard G-codes
2019-03-03 01:52:15 -06:00
Scott Lahteine
3f36a38512
Clean up some pre-serial-redirect includes
2019-03-03 01:52:15 -06:00
Scott Lahteine
fa0d909dd3
Add FIL_RUNOUT_PIN for BIGTREE_SKR_V1.3
...
See #13267
2019-03-03 00:27:47 -06:00
Ludy
bd4160dbaf
Unused CS_ACTUAL_sb ( #13282 )
2019-03-02 17:30:30 -06:00
Vasily Evseenko
71773b128d
Fix stepper use before init. Add Ultimaker2+ Extended clone config ( #13284 )
2019-03-02 17:29:02 -06:00
Scott Lahteine
edc4e037c4
Add a note to G10
2019-03-02 17:19:36 -06:00
Tobias Frost
57afd0ab37
Fix range check bug in FileList::seek() ( #13286 )
...
When `count()` returns 0, `pos > (count()-1)` will always yield `true` due to integer underflow.
2019-03-02 16:43:08 -06:00
kAdonis
05c2f80826
Fix bug in wait-for-heatup ( #13290 )
2019-03-02 16:29:10 -06:00
Chris Pepper
b0553d2d97
Add M997 support and simple implementation for LPC176x ( #13281 )
2019-03-01 20:11:50 -06:00
Scott Lahteine
fa236e9718
General cleanup ahead of L64XX
2019-03-01 19:58:07 -06:00
Scott Lahteine
2f1e1dcb42
Gradual step towards EXTRUDERS 0 support
2019-03-01 01:51:24 -06:00
Scott Lahteine
99d0022fae
Drop the Z_MIN_PROBE_ENDSTOP option ( #13276 )
2019-03-01 00:27:45 -06:00
Scott Lahteine
9a6b90f47d
TMC2660.h comment tweaks
2019-03-01 00:25:22 -06:00
Scott Lahteine
a2e3226597
Init XYZ to configured home position
2019-02-28 22:10:26 -06:00
Scott Lahteine
4fbbce9a35
Marlin Dev Mode for DOGM status screen
2019-02-28 22:10:26 -06:00
Scott Lahteine
998ce55be0
Alternative fan bitmap
2019-02-28 22:08:20 -06:00
InsanityAutomation
e2e2a55d9b
Add thermistor type 67 SliceEng ( #13275 )
2019-02-28 19:44:17 -06:00
Msq001
5b7ad3a5a0
Fix SKR onboard TF card CS pin ( #13272 )
2019-02-28 19:41:19 -06:00
Scott Lahteine
7fde3ed915
Skip hysteresis check when temp is already close to target
...
To eliminate a long delay during pause, park, and filament change
2019-02-28 14:35:19 -06:00
Chris Pepper
7de6476b3d
Fix binary protocol error
2019-02-28 02:31:42 +00:00
Scott Lahteine
2c10222e87
card.transfer_port => transfer_port_index
2019-02-27 20:14:17 -06:00
Chris Pepper
4ab433d391
Fix binary protocol with one serial port ( #13270 )
...
- The `sdcard.transfer_port` variable is Marlin's internal serial port index, not the physical serial port number.
- Added packet number to "ok" response so hosts don't need to wait for the ACK.
- Renamed feature to `BINARY_FILE_TRANSFER`, as the speed up is only consequential to the ability to transfer binaries over serial.
2019-02-27 19:57:48 -06:00
InsanityAutomation
eb4bf93ea4
Add more Babystep options ( #13262 )
2019-02-27 04:38:56 -06:00
Scott Lahteine
f37df28d17
UBL G29 T current position fix
...
Counterpart to #12845
2019-02-26 22:25:53 -06:00
Msq001
f8a39919fa
Add Bigtree SKR 1.3 board ( #13267 )
...
Co-Authored-By: Msq001 <msq001@users.noreply.github.com>
2019-02-26 21:30:00 -06:00
Bob Kuhn
ddbe4cfa20
Printrboard G2 support ( #13116 )
2019-02-26 21:03:13 -06:00
Scott Lahteine
4200f9ed62
Hide freeMemory et.al. warnings
2019-02-26 18:03:00 -06:00
Scott Lahteine
dc88747770
Fix Due GET_ARRAY_IS_DIGITAL
...
Co-Authored-By: bob-the-kuhn <bob.kuhn@att.net>
2019-02-26 17:49:14 -06:00
Scott Lahteine
a79b9bbe6b
Cleanup whitespace, add a const
2019-02-26 17:49:14 -06:00
Giuliano Zaro
2616e4d4d9
Remove duplicated 'chitchat' defines ( #13258 )
2019-02-25 16:13:01 -06:00
Scott Lahteine
5d28575d4d
Clean up some motion code
2019-02-25 16:01:42 -06:00
Scott Lahteine
808b076000
Update some ABL/UBL conditionals
2019-02-25 16:01:42 -06:00
Scott Lahteine
833c2e54a1
Add an empty flushTX to MarlinSerialUSB_Due
2019-02-25 13:48:14 -06:00
Scott Lahteine
38363902c7
Fix sanity checks for distinct E factor settings
...
Reference #13156
2019-02-25 00:20:36 -06:00
Scott Lahteine
64253e1a58
Followup to serial reform
...
Reference #13250
2019-02-25 00:20:36 -06:00
Minims
92a4984066
Fix G34 probe position ( #13251 )
2019-02-24 13:57:30 -06:00
Scott Lahteine
e15354e387
Simplify serial port redirect ( #13234 )
2019-02-23 22:53:01 -06:00
Chris Pepper
88cc1d1a31
Fix Preprocessor syntax in Re-ARM pins file ( #13247 )
2019-02-24 01:36:58 +00:00
Karl Andersson
76e9ee33aa
Fix include order to make SERIAL_PORT_2 work ( #13241 )
2019-02-23 16:56:09 -06:00
Bruce j Beare
562f2321d2
Fix a G34 bug, allow negative Z corrections ( #13240 )
2019-02-23 02:41:52 -06:00
FernandoVelcic
edf025ed8d
Update Spanish language ( #13236 )
2019-02-23 00:41:02 -06:00
Scott Lahteine
02fec89a0d
Turn fans off in zero_fan_speeds
...
Addressing #13231
2019-02-22 21:00:44 -06:00
Scott Lahteine
15aa932aa6
HAL for Linux ( #13146 )
2019-02-22 19:09:10 -06:00
kwalters3
5eb82ca6a8
Change SSD1306_OLED_I2C_CONTROLLER to HAS_SSD1306_OLED_I2C ( #13223 )
2019-02-22 19:08:36 -06:00
Marcio Teixeira
109e67169c
Define G21 as NOOP w/o INCH_MODE_SUPPORT ( #13229 )
...
Ticket #13228
If `INCH_MODE_SUPPORT` is undefined, G20 is an unknown command as it should be (Marlin is, by default, operating in metric mode). G21, however, is found in many slicers and printer start gcode sections and should be accepted (as a NOOP) to avoid the unknown commands.
2019-02-22 15:35:32 -06:00
AnHardt
31b0be74af
Fix autotemp_factor menu setting ( #13226 )
...
Fix #12643
Only factors above 1 can have a 'positive' effect.
2019-02-22 15:30:17 -06:00
Evgeny-SPB
f6ab62bc13
Fix Creality CR-10 S5 filament change ( #13219 )
2019-02-21 05:40:49 -06:00
Thomas Moore
9f5e4e5ad8
Update LPC1769 Pins Files ( #13183 )
2019-02-21 00:54:05 -06:00
Greg Nutt
608a6810e7
Fix DOGLCD_A0 pin in pins_Smoothieboard.h ( #13217 )
2019-02-20 18:08:49 -06:00
Scott Lahteine
80359c9937
Add more parameters to M240
...
Co-Authored-By: shitcreek <45380455+shitcreek@users.noreply.github.com>
2019-02-20 14:51:36 -06:00
Scott Lahteine
a43e892fb5
Use 8-bit i2c address on LPC platform
...
Fix #9799 — hopefully not a unicorn
2019-02-20 06:27:26 -06:00
Scott Lahteine
631d867dc9
HAL cleanups
2019-02-20 06:27:26 -06:00
Scott Lahteine
89bbc30a09
Fix init of power supply pin
...
Fix #13184
2019-02-20 05:29:05 -06:00
Scott Lahteine
44c22e3935
Provide a default MAX6675_SS_PIN for ReARM
...
See #8010
2019-02-20 05:06:06 -06:00
Scott Lahteine
3c9a7926c2
Fix compile error with JUNCTION_DEVIATION
...
See #13000
2019-02-20 04:54:26 -06:00
Scott Lahteine
758c6c9464
Very minor SPI speedup
2019-02-20 04:36:23 -06:00
Scott Lahteine
422dd6666e
Fix Due EEPROM write bug
...
See #13065
2019-02-20 04:36:23 -06:00
Scott Lahteine
03e109c4a3
FLASH_EEPROM => FLASH_EEPROM_EMULATION
2019-02-20 04:36:23 -06:00
Scott Lahteine
50917ccda6
Tweak some u8g interface code
2019-02-20 04:26:34 -06:00
LinFor
ba39186364
TMC_DEBUG optimization and improvements ( #13135 )
2019-02-20 02:22:42 -06:00
Scott Lahteine
1424b368cf
Tweak M122 comment in configs
2019-02-19 16:20:18 -06:00
Scott Lahteine
3a1b6fe8c1
Coding standards
2019-02-19 14:58:39 -06:00
InsanityAutomation
19af90face
Fix a host action compile error ( #13208 )
2019-02-19 14:47:31 -06:00
Marcio Teixeira
992cdc8d14
Fix host action / G-code ordering in event_probe_failure ( #13207 )
...
Observing from the console, it makes the most sense to do `//action:probe_retry` before executing commands.
2019-02-19 14:45:03 -06:00
InsanityAutomation
33a6d52965
Fix a RAPTOR2 pin conflict ( #13205 )
2019-02-19 14:42:02 -06:00
InsanityAutomation
52665f54ad
Fix bad Purge More logic ( #13193 )
2019-02-19 14:37:18 -06:00
Scott Lahteine
18458ec42b
Error in Smoothieboard for unsupported display
2019-02-19 14:17:33 -06:00
InsanityAutomation
d4ed9b3ef1
Babystep also requires homing ( #13191 )
2019-02-17 14:35:45 -06:00
InsanityAutomation
ca7b2f574f
Fix condition on tool change filament swap menu ( #13190 )
2019-02-17 12:33:46 -06:00
Roman Moravčík
208ab8b366
Fix compilation with one service interval ( #13185 )
2019-02-17 12:32:47 -06:00
Roman Moravčík
567d03a269
Update Slovak language ( #13187 )
2019-02-17 12:29:49 -06:00
Alain Martel
27203c62b8
Enable M240, set photo pins for 3DFabXYZ i3 ( #13174 )
2019-02-15 21:16:39 -06:00
Evgeny-SPB
3025ddf179
Support for Creality CR-10 5S ( #13173 )
2019-02-15 21:09:44 -06:00
Scott Lahteine
e00aad84af
Add M240 parameters D I J R S
2019-02-14 20:00:40 -06:00
Marcio Teixeira
31c240a8db
Enhancements to G425 ( #13159 )
...
- Turn off bed leveling prior to calibrating.
- This prevents lateral probes from having a Z component that
triggers the Z endstop and causes the motion to be aborted.
- Got rid of static const float arrays "dimension" and "true_center"
- Frees up 24 bytes of SRAM
- Changed incorrect use of "bool" for float in backlash macros.
- Replaced arguments with 0.0f and 1.0f for clarity.
- Now only disables soft endstops (since calibration cube is outside of bed)
- Not necessary to disable global endstops
2019-02-14 16:45:31 -06:00
Andy Shaw
84fc400aba
Update BIQU SKR V1.1 pins, add TMC2130 settings ( #13166 )
...
* Remove untested displays add TMC2130 configs.
* Remove references to the ReARM, delete untested displays. Add TMC2130 settings. Cleanup spacing, etc.
2019-02-14 16:43:56 -06:00
Scott Lahteine
ab2816c870
Patch for M240
2019-02-14 15:13:57 -06:00
Scott Lahteine
d2bdb71c13
Add PHOTO_GCODE option, photo trigger physical move ( #13168 )
2019-02-14 15:09:35 -06:00
Scott Lahteine
be9a409980
Fix M125 XY parameters, export get_homing_bump_feedrate
2019-02-14 05:25:46 -06:00
Scott Lahteine
ce40c2e87c
Use do_blocking_move_to(ref, fr)
2019-02-14 02:22:08 -06:00
Giuliano Zaro
bdc2f10b90
Update Italian language, fix unused var warning ( #13164 )
2019-02-13 21:05:18 -06:00
Marcio Teixeira
9f0e1834ec
Followup to #13039 ( #13163 )
...
- Fix compile error when accessing `process_subcommands_now_P`.
- Use `const` var eliminating double-negative (to make code more understandable).
2019-02-13 20:39:38 -06:00
Ludy
1ace97e946
[2.0.x] Update German language ( #13150 )
2019-02-13 20:31:50 -06:00
Scott Lahteine
7cf9b93f26
Add HAS_FILAMENT_SENSOR ahead of 12962
2019-02-12 20:13:20 -06:00
Giuliano Zaro
2c8d12d3ec
Update Italian language ( #13148 )
2019-02-12 18:40:34 -06:00
Scott Lahteine
c2b90c44e4
Prettify some code comments
2019-02-12 17:43:37 -06:00
Scott Lahteine
a0dadc8c62
Smaller I2CPositionEncoder strings
2019-02-12 16:21:56 -06:00
Scott Lahteine
18996d2595
Fix some spelling
2019-02-12 16:21:56 -06:00
revilor
e56c13670d
Service interval watchdog ( #13105 )
2019-02-12 15:58:56 -06:00
InsanityAutomation
7f1b69b0c8
Add HOST_PROMPT_SUPPORT ( #13039 )
2019-02-12 15:55:47 -06:00
Scott Lahteine
0feeef2604
Update copyright in headers
2019-02-12 15:30:11 -06:00
Scott Lahteine
894f5c24a8
Fix trailing whitespace
2019-02-12 14:25:57 -06:00
Roman Moravčík
bace52afd7
Fixed compilation with MMU2_MENUS disabled ( #13140 )
2019-02-12 12:55:49 -06:00
Ludy
584f9cd449
Update German language ( #13137 )
2019-02-12 12:54:57 -06:00
Scott Lahteine
d9a3fea022
Comments in HAL_spi_STM32F1.cpp
2019-02-11 18:06:33 -06:00
Giuliano Zaro
773fa5c40f
Fix define used when PID is off ( #13119 )
...
Replaced `PID_MAX` with `BANG_MAX` since it should be the correct define to be used when PID is not enabled.
2019-02-11 17:29:17 -06:00
Giuliano Zaro
f7efe6f6c5
[2.0.x] Fix TEMP_STAT_LED startup init ( #13120 )
2019-02-11 17:27:59 -06:00
Ludy
2bd6ce4b62
Update German language ( #13125 )
2019-02-11 17:08:21 -06:00
Giuliano Zaro
27115ff7eb
Update Italian language ( #13123 )
...
Incomplete.
2019-02-11 17:07:21 -06:00
Roman Moravčík
08a8bd10ca
Updated Slovak translation ( #13122 )
2019-02-11 17:06:10 -06:00
Scott Lahteine
3e2a4c3b26
Show mixer and temperature menus while printing
2019-02-11 16:52:47 -06:00
Scott Lahteine
8d271f20fe
C10mini E steps of 95
...
See https://www.patreon.com/posts/creality-cr10-24602624
2019-02-10 14:23:05 -06:00
Scott Lahteine
9737608f0a
Enable gradient when alias is cleared
2019-02-10 06:39:12 -06:00
Simon Jouet
5cd0fa3ce1
Basic GPIO expander using the ESP32 I2S peripheral ( #12959 )
2019-02-10 05:40:31 -06:00
Scott Lahteine
3983cacbcf
No extern needed for func decl
2019-02-10 05:38:27 -06:00
Scott Lahteine
43b29c093b
Update pinsDebug_list.h with XY PWM pins
2019-02-10 05:13:05 -06:00
Scott Lahteine
166e567ab8
Fix HAS_MOTOR_CURRENT_PWM
2019-02-10 05:06:46 -06:00
Scott Lahteine
6de3d34378
M166 Gradients, LCD Menu for 2-channel Mixer (Geeetech A10M/A20M) ( #13022 )
2019-02-10 04:54:23 -06:00
LinFor
7ee35c2611
PID_MENU option to save PROGMEM in LCD menus ( #13095 )
2019-02-10 04:03:18 -06:00
Ludy
936f982392
Update German Language ( #13110 )
2019-02-10 03:55:08 -06:00
AnHardt
0e37fe8776
Apply minimum C in M303 ( #13113 )
...
Apply minimum `C` in `M303`. `PID_autotune()` needs to be called with a 'C'ycles-parameter >2 to give meaningful (different from 0) PID-factors. Therefore silently raise C to 3. Fixing one aspect of #13104
2019-02-10 03:54:45 -06:00
Scott Lahteine
5a316664e5
Update chopper timing
2019-02-10 03:12:20 -06:00
Scott Lahteine
fcb16ceb29
Update default config
2019-02-10 00:20:11 -06:00
Alain Martel
9ae7cca5e9
Disable RGB_LED for 3DFabXYZ ( #13097 )
2019-02-08 15:18:20 -06:00
Scott Lahteine
f3b6cb4d34
Clean up, update config comments
2019-02-08 15:13:52 -06:00
Scott Lahteine
ae03753ef1
Fix PCA9533 with PRINTER_EVENT_LEDS
2019-02-08 15:13:52 -06:00
Scott Lahteine
95d3f3953a
DEFAULT_WEBSITE_URL => BOARD_WEBSITE_URL
2019-02-08 14:54:34 -06:00
Scott Lahteine
6ddd81c178
[2.0.x] Update German Language ( #13100 )
...
add MMU2
2019-02-08 14:25:24 -06:00
Giuliano Zaro
7c9ff322f3
Update Italian language ( #13099 )
2019-02-08 14:23:37 -06:00
Ludy
ce8cb6a5d9
[2.0.x] Update German Language
...
add MMU2
2019-02-07 20:04:34 +01:00
Scott Lahteine
f269766408
Put the MMU2 menu with the others
2019-02-06 17:38:46 -06:00
Marcio Teixeira
e1604198ff
G425 — Auto-calibrate Backlash and Nozzle Offsets ( #13050 )
2019-02-06 17:20:17 -06:00
Marcio Teixeira
113af46a1b
Add ExtUI methods to babystep probe/nozzle offsets ( #12590 )
2019-02-06 07:16:54 -06:00
InsanityAutomation
413e303ad5
More Advanced Pause options ( #12984 )
2019-02-06 06:39:42 -06:00
Mark Zachmann
19cf72e057
Support individual solenoid disable with M381 ( #13008 )
2019-02-06 06:34:53 -06:00
teemuatlut
d81342254a
Support new TMC drivers ( #13026 )
2019-02-06 06:33:14 -06:00
Scott Lahteine
e1587da228
Clean up HAL_spi_Due.cpp ( #13087 )
2019-02-06 06:31:31 -06:00
Rolf Werum
524c6c10bf
MAGNETIC_PARKING_EXTRUDER ( #12351 )
2019-02-06 06:30:53 -06:00
Scott Lahteine
1bd9a63049
Add HAS_EXTRA_ENDSTOPS macro
2019-02-06 05:10:05 -06:00
Scott Lahteine
3c49396370
Fix compile error with DUE + MAX6675 ( #13086 )
2019-02-05 22:56:13 -06:00
Roxy-3D
ab6908a513
Fix Probe Offset bug...
2019-02-05 20:30:20 -07:00
revilor
69aaf5d096
MMU2 fixes ( #13082 )
2019-02-05 20:56:22 -06:00
Scott Lahteine
2f8e89adc3
Remove extraneous ui. prefixes
2019-02-05 19:04:37 -06:00
Scott Lahteine
870757aa17
Tweaks to pins_GT2560_V3.h
2019-02-04 22:52:50 -06:00
Scott Lahteine
b96cc30cd0
HAL spacing tweak
2019-02-04 21:51:06 -06:00
Scott Lahteine
9e394139e5
Followup to 90911104
2019-02-04 10:46:52 -06:00
Sam Lane
b35a7c2c87
Fixed closed-loop planner stall ( #13005 )
2019-02-04 07:43:09 -06:00
Ludy
691e925adc
Update German language ( #13012 )
2019-02-04 07:25:07 -06:00
Scott Lahteine
1497fb388a
M29 match logic was reversed ( #13013 )
...
* M29 logic was reversed
If in card-saving mode generate errors line errors for anything that's *NOT* "M29 ?"
* Update queue.cpp
* Update queue.cpp
2019-02-04 07:23:42 -06:00
Scott Lahteine
b5fd2fb58b
Allow M29 to be processed late
2019-02-04 07:23:02 -06:00
Scott Lahteine
c03bac9ad4
Update queue.cpp
2019-02-04 07:17:40 -06:00
Scott Lahteine
a49f0205ea
Update queue.cpp
2019-02-04 07:11:08 -06:00
Andy Shaw
9091110460
LPC1768 - Don't change CS pin state ( #13015 )
2019-02-04 07:08:39 -06:00
Scott Lahteine
10d855cb21
Sanity check USER_GCODE formatting
2019-02-04 06:36:41 -06:00
Scott Lahteine
d97bb4c41c
Followup to e10943d0
2019-02-04 06:11:31 -06:00
jeffstaley
2f176d6fb8
Flush RX buffer on G-code line errors to prevent hang ( #13018 )
2019-02-04 06:03:49 -06:00
Scott Lahteine
ca73b2f465
Add static assert to catch errors in COPY(a,b)
2019-02-04 05:52:32 -06:00
Nathan
df1043516e
Fix the delta homing issue ( #12974 )
2019-02-04 05:25:50 -06:00
Scott Lahteine
4200bd2fc1
Report on M92 with no arguments ( #12833 )
2019-02-04 05:24:15 -06:00
Scott Lahteine
e10943d0d8
Minor tweak to main menu
2019-02-04 04:58:31 -06:00
Scott Lahteine
d4d1b28a06
Fix some include paths
2019-02-04 03:57:15 -06:00
Scott Lahteine
0d720a6ff4
Tweak to emergency_parser.h
2019-02-04 03:56:56 -06:00
Scott Lahteine
0a7ea7063f
Hide Resume Print when not relevant
2019-02-04 03:02:44 -06:00
Scott Lahteine
afe79ba22b
Minor code cleanup
2019-02-04 02:23:06 -06:00
Scott Lahteine
fdb97a3e9c
Add class and macro to save and auto-restore a variable
2019-02-04 02:23:06 -06:00
Scott Lahteine
433518de74
Prevent M420 error from disconnecting OctoPrint
...
Just echo the error instead of labeling it `Error:`.
2019-02-04 01:54:43 -06:00
Marcio Teixeira
5cfc1cdacc
Support SWITCHING_NOZZLE with 2 servos ( #13054 )
2019-02-04 00:19:56 -06:00
Psycho
3c88cac2e9
Velleman Vertex Delta pins ( #13072 )
2019-02-04 00:15:08 -06:00
Nicolas G
6fb4001b58
Add option to disable fan speed slowing in M303 ( #13066 )
2019-02-04 00:12:41 -06:00
Scott Lahteine
ca1be02bf0
Tweak some pins formatting
2019-02-04 00:06:41 -06:00
Scott Lahteine
38c2ca9281
Clean up trailing whitespace
2019-02-03 23:00:57 -06:00
Mark Zachmann
4d1093b386
Fix init of last_direction_bits ( #13067 )
2019-02-03 01:29:00 -06:00
Scott Lahteine
4fa1c52688
Tweak serial output code
2019-02-03 01:09:14 -06:00
Scott Lahteine
a5e3384691
Pre-apply cosmetic changes to mixing
2019-02-03 01:09:14 -06:00
Scott Lahteine
0358ffcd4c
Drop E element from homing_feedrate_mm_s
2019-02-02 15:55:00 -06:00
Scott Lahteine
95223cb28e
Remove dead code from stepper.h
...
These values are always supplied by `Conditionals_post.h`.
2019-02-02 15:35:05 -06:00
mattfredwill
c3cb449990
TMC2130 dual-stepper Sensorless Homing ( #13061 )
2019-02-01 18:09:01 -06:00
Marcio Teixeira
f6edd2c472
Move stepper settings to "Advanced Settings" menu ( #13063 )
2019-02-01 18:07:04 -06:00
InsanityAutomation
68bbac207e
Update pins_FORMBOT_TREX3.h ( #13058 )
2019-02-01 18:06:02 -06:00
revilor
6a57d0b381
Prusa MMU2 ( #12967 )
2019-01-31 19:10:52 -06:00
Scott Lahteine
996f7d1642
Fix I2C_POSITION_ENCODERS commentary
2019-01-30 22:17:17 -06:00
raTmole
988b5aa4e6
Update GT2560 V3 pins ( #13036 )
2019-01-30 21:10:56 -06:00
InsanityAutomation
7d927b6691
Move Z Probe Z Offset from Advanced to basic Configuration ( #13056 )
2019-01-30 21:08:36 -06:00
Giuliano Zaro
31e213e427
Always show Tune sub-menu ( #13049 )
2019-01-30 21:05:55 -06:00
teemuatlut
f0503372d9
Revert E_AXIS_N cast ( #13055 )
2019-01-30 20:55:05 -06:00
InsanityAutomation
a1d03fe7ba
Fix single nozzle fan ( #13038 )
2019-01-30 20:54:04 -06:00
Scott Lahteine
159d7eefda
New boards entry for the A20M
2019-01-28 21:08:20 -06:00
Scott Lahteine
97da6c1da5
Use MIN/MAX for min/max
2019-01-28 20:36:13 -06:00
Scott Lahteine
17a8c37148
Label menu edit items
2019-01-28 20:20:46 -06:00
raTmole
ddeca7a358
Fix resume from power loss G-Code. ( #13035 )
2019-01-28 13:19:26 -06:00
Thomas Moore
02ab66fca3
Update Cohesion3D Pins Files ( #13027 )
2019-01-27 23:11:33 -06:00
Giuliano Zaro
a79d80c78e
Minor cleanup of pause code ( #13030 )
2019-01-27 23:10:25 -06:00
jeffstaley
0da636e1a3
Set correct stepper direction on reset ( #13032 )
...
On a reset steppers were being initialized to incorrect direction. Original code wasn't respecting `INVERT_Z_DIR` define.
2019-01-27 23:02:38 -06:00
Scott Lahteine
3845baf398
Followup to #12982
2019-01-27 22:53:46 -06:00
InsanityAutomation
48a3502656
Remote streamer improvements ( #12982 )
2019-01-27 22:43:13 -06:00
Scott Lahteine
621fbe99de
Followup to #12817
2019-01-27 20:48:58 -06:00
Marcio Teixeira
f214118e45
Action to notify host of filament runout. ( #12817 )
2019-01-27 20:18:05 -06:00
Scott Lahteine
aad770bce8
Bring default configs in sync
2019-01-26 16:44:42 -06:00
jeffstaley
3f91233f6d
M29 logic was reversed
...
If in card-saving mode generate errors line errors for anything that's *NOT* "M29 ?"
2019-01-25 07:36:52 -08:00
jeffstaley
0e0cc13650
Fix M29 for Pronterface SD card upload ( #13010 )
2019-01-24 21:10:59 -06:00
Jiri
24fffb8d93
Fix undefined lcd_tmpfan_speed on NO_LCD_MENUS ( #13006 )
2019-01-24 16:34:40 -06:00
Scott Lahteine
8f9b246d0e
Tweak some formatting, replace tabs
2019-01-24 13:18:56 -06:00
Bo Herrmannsen
808df82b36
Support for Anycubic I3 ( #12972 )
2019-01-24 12:40:49 -06:00
Scott Lahteine
ae91914260
Prevent name conflicts with mixed stepper drivers
2019-01-24 01:25:28 -06:00
Scott Lahteine
0eca236dcd
Fix L6470 config comments
2019-01-24 00:58:16 -06:00
InsanityAutomation
f4d1f13358
Warn on cold extrusion, dont error
2019-01-24 00:16:14 -06:00
Scott Lahteine
aa74a900f5
Bring Rostock 301 and ArmEd configs up to date
2019-01-23 23:37:37 -06:00
Scott Lahteine
0f07ba4f09
Tweak some comments
2019-01-23 20:18:13 -06:00
Scott Lahteine
00cdd41b5f
Clean up for recent changes
2019-01-23 20:08:58 -06:00
Roman Moravčík
7d53b79596
Update Slovak translation ( #12991 )
2019-01-23 19:48:16 -06:00
Giuliano Zaro
18c32996c1
[2.0.x] Updated Italian language ( #12997 )
2019-01-23 19:35:42 -06:00
Bob Kuhn
7c1a5e3c47
Fix TEMP_TIMER in pins_STEVAL.h ( #12994 )
2019-01-23 19:34:39 -06:00
Scott Lahteine
b4994ad12e
Update language_it.h
2019-01-23 19:28:57 -06:00
Bob Kuhn
2f35747f29
L6470 SPI daisy chain support ( #12895 )
2019-01-23 19:06:54 -06:00
Scott Lahteine
6453b82a5e
Clean up trailing whitespace
2019-01-23 15:57:01 -06:00
Scott Lahteine
48a581ba2e
Tweak some HAL Due code
2019-01-23 00:53:20 -06:00
Marcio Teixeira
54fdf57b8c
ExtUI: Fix fan wrapping around from 0 to 100 ( #12987 )
2019-01-22 23:33:10 -06:00
InsanityAutomation
dbe4126e07
Update language_en.h ( #12988 )
2019-01-22 23:32:01 -06:00
teemuatlut
e5801b75f8
Fix TMC-related compile issues. ( #12971 )
...
- `STEALTHOP_[XYZE]` configuration options now set the default state.
2019-01-20 23:54:57 -06:00
Gert-Jan Rodenburg
bb30927549
Fix pins for ZONESTAR_LCD with Zonestar ZRIB ( #12956 )
2019-01-20 23:52:51 -06:00
Ludy
dc65d96aca
Fix TMC compile error ( #12965 )
2019-01-20 23:47:28 -06:00
InsanityAutomation
a1cf49935d
Add laser control menu ( #12883 )
2019-01-20 23:41:47 -06:00
InsanityAutomation
75f2665f2e
LCD SD Card items near top when not using wheel ( #12926 )
2019-01-20 23:24:53 -06:00
Scott Lahteine
e1f951813a
Remove old block end comment
2019-01-20 02:30:03 -06:00
Scott Lahteine
52108192d1
Prevent L6470 class name conflict with drivers.h define
...
Fix #12824
2019-01-20 00:32:56 -06:00
Scott Lahteine
0495fcd475
Minor spacing fix
2019-01-20 00:10:50 -06:00
lanserge
c2cf8ffa82
Add support for Arduino DUE Shield Kit ( #12950 )
2019-01-19 23:43:32 -06:00
Scott Lahteine
4e5a915ef8
Fix some Makefile comments
2019-01-19 23:41:30 -06:00
Scott Lahteine
a5911765c3
Tweak some spacing
2019-01-19 20:27:57 -06:00
chrisly42
99e5e8362f
Rapide Lite 200 config, pins_RL200 RUMBA clone ( #12848 )
2019-01-19 20:19:14 -06:00
Scott Lahteine
6411680364
Update some pins spacing
2019-01-19 19:21:52 -06:00
teemuatlut
8a3f1d6932
Fix chopper timing struct and initialization ( #12943 )
2019-01-19 18:57:02 -06:00
Ludy
c6991109b7
Update German language ( #12953 )
2019-01-19 18:50:24 -06:00
Giuliano Zaro
ca9eb14f6a
Update Italian language ( #12951 )
2019-01-19 18:48:13 -06:00
Ludy
acf266fe78
Fix a compile warning, etc. ( #12955 )
2019-01-19 18:47:29 -06:00
Scott Lahteine
424aa05cc2
Fix some file endings
2019-01-19 18:19:12 -06:00
Scott Lahteine
ce563d7c2e
Various general cleanups
...
Mostly from the L6470-oriented PR
2019-01-19 16:56:12 -06:00
Scott Lahteine
02cc63d6d4
Update CreatorPro Configuration_adv.h
2019-01-19 16:37:50 -06:00
Marcio Teixeira
f4c16e683b
Follow up fixes to #12884 ( #12940 )
2019-01-17 18:48:29 -06:00
Scott Lahteine
712e23c383
Fix up some whitespace
2019-01-17 18:05:36 -06:00
Ziemowit
20c20dacb7
MKS SBASE needs DRV8825 ( #12911 )
2019-01-17 13:21:53 -06:00
Giuliano Zaro
7bb5d4bfe8
Small LED code reorganization ( #12929 )
2019-01-17 13:20:26 -06:00
teemuatlut
e6805582a6
M569 to change stepping mode. Add new TMC section to LCD. ( #12884 )
2019-01-17 13:17:16 -06:00
Bob Kuhn
d08f27e27b
Add support for STEVAL 3DP001V1 ( #12894 )
2019-01-15 18:59:36 -06:00
Alain Martel
cdb562d558
Bring Migbot config up to date ( #12916 )
2019-01-15 18:53:07 -06:00
Giuliano Zaro
8f4c6e6d1a
Fix case light on boot ( #12919 )
2019-01-15 18:50:56 -06:00
Marcio Teixeira
f11c6d5d02
Fix M107 when dual-nozzles share fan ( #12819 ) ( #12909 )
2019-01-15 18:45:18 -06:00
Karl Andersson
64a4649290
STM32 - Fix SD write ( #12897 )
2019-01-15 18:44:22 -06:00
Ludy
294521439e
Clean up Configuration_adv.h ( #12900 )
2019-01-15 18:42:10 -06:00
InsanityAutomation
59b18aaeef
Allow resume from pause with parking enabled ( #12893 )
...
Currently, Pause of an SD-Memory card print does not work. This has been verified to resolve the issue by multiple people.
I understand more work needs to be done to resolve some of the concerns...
2019-01-15 07:58:54 -07:00
Giuliano Zaro
85f149befe
Save some progmem ( #12913 )
2019-01-14 20:56:30 -06:00
mikeshub
7fde8d9d1e
Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support ( #12855 )
...
- Fix a bug in MAXxxxx thermocouple temp reporting.
- Add support for 3-wire HD44780.
- Add support for PCA9533 RGB driver.
- Add configuration examples for FlashForge CreatorPro.
2019-01-14 14:29:55 -06:00
Scott Lahteine
3644c940bf
Tweak SD section of Main Menu
2019-01-13 18:00:07 -06:00
teemuatlut
1a79878dff
Remove TMC_Z_CALIBRATION in favor of Z_STEPPER_AUTO_ALIGN
2019-01-12 18:07:28 -06:00
Scott Lahteine
7cfce20cd3
Update comments on M125
2019-01-12 17:52:44 -06:00
Jason
dc4786a504
Config files for PowerWASP Printer ( #12889 )
2019-01-12 16:57:45 -06:00
Scott Lahteine
3e867008f0
Fix some HAL_STM32F1 type declarations
2019-01-12 16:21:11 -06:00
Scott Lahteine
eb78aed863
Rename LCD menus according to variable types ( #12892 )
2019-01-12 16:01:04 -06:00
InsanityAutomation
ed3ab5e212
Fix M24 not starting new job ( #12887 )
2019-01-12 15:30:44 -06:00
Nils Hasenbanck
f9299c4461
Make timer definition in pin files for STM32 possible ( #12874 )
...
RemRam needs to redefine a particular timer to work correctly. The HAL did foresee this possibility and checks if the timer was already defined for either the stepper or temperature timer.
Prior to this commit the header file for the timers couldn't see those definitions in the pin file, but this commit will fix this.
Tested on an actual hardware to verify. (It wouldn't boot without it.)
2019-01-12 14:40:49 -06:00
InsanityAutomation
082f6a27de
ADAPTIVE_FAN_SLOWING extension to hotend thermal protection ( #12853 )
2019-01-12 00:41:48 -06:00
Scott Lahteine
459f4fef60
Fix Temperature::init bug with HEATER_4_PIN
2019-01-11 22:54:26 -06:00
InsanityAutomation
a403d9a50c
Improve menu pause / resume ( #12876 )
2019-01-11 20:42:11 -06:00
Alain Martel
432c21456f
Add 3DFabXYZ Migbot example config ( #12775 )
...
Co-Authored-By: Alain Martel <alain74martel@gmail.com>
2019-01-11 20:41:20 -06:00
Scott Lahteine
fb8111553e
getStatus => report_status
2019-01-11 19:51:00 -06:00
Chris Pepper
2919f3045d
[LPC176x] Update PIO extrascript ( #12878 )
2019-01-11 19:45:33 -06:00
Scott Lahteine
19fea772e5
Use E_AXIS_N where it makes sense
2019-01-11 19:42:34 -06:00
Scott Lahteine
0d30ccf767
Tweaks to TMC26XStepper
2019-01-11 19:42:34 -06:00
HackingGulliver
1fd8e2c649
Fix: Junction Deviation calculates wrong cos(theta) on CoreXY ( #12879 )
2019-01-11 19:25:48 -06:00
Scott Lahteine
b402040059
Split bed size sanity check into two
2019-01-11 15:49:57 -06:00
Chris Barr
1d33784bf9
Add RUMBA32 Board ( #12856 )
2019-01-10 19:34:31 -06:00
Ondřej Nový
a0ef6198ff
Level bed corners Z-hop height option ( #12858 )
2019-01-10 19:15:17 -06:00
Karl Andersson
8ae6f1e556
Fix errors and some compiler warnings with HAL_STM32 PlatformIO build ( #12869 )
2019-01-10 19:01:31 -06:00
Scott Lahteine
e6484d9dab
Return to status when SD card is removed
2019-01-10 15:43:31 -06:00
Scott Lahteine
5f2d75f45b
Move PINS_DEBUGGING to @section develop
2019-01-08 20:05:05 -06:00
Scott Lahteine
da42f27c9e
Use maths macros for ceil/floor
2019-01-05 21:21:02 -06:00
Ludy
de4561c980
VORON Add LCD option BEEP_ON_FEEDRATE_CHANGE ( #12822 )
2019-01-05 14:12:05 -06:00
Giuliano Zaro
709a6356f7
Remove obsolete test conditions ( #12829 )
2019-01-05 14:02:45 -06:00
Luu Lac
bcf347403b
Fix M106 extruder & fan count ( #12820 )
2019-01-05 14:01:35 -06:00
Kaushik Vemparala
ba7e35cbab
Add LCD option BEEP_ON_FEEDRATE_CHANGE ( #12774 )
2019-01-04 19:30:08 -06:00
jmz52
d372e7e477
SDIO support for STM32F1 ( #12782 )
2019-01-04 13:38:07 -06:00
Marcio Teixeira
6a8fb0f25f
Simplify backlash compensation code. ( #12813 )
...
- Use `TEST(dm,axis)` to determine directions instead of doing comparisons.
- Remove recomputation of `millimeters` and `delta_mm` since backlash compensation should not affect the distance over which material is extruded.
2019-01-04 13:30:56 -06:00
luxflow
7f244f9b9c
Update LPC SD pins for BIQU SKR ( #12767 )
...
(Exactly matching the Azteeg X5 MINI Wifi)
2019-01-03 10:44:00 -06:00
jmz52
813a4ea107
Add support for Mks Robin TFT display ( #12706 )
...
* Add support for MKS Robin TFT display
- Add support for MKS Robin TFT display and encoder for MKS Robin board.
- Generic 128x64 UI with x2 upscale is used (for now).
- Tested on MKS Robin TFT V2.0 with ST7789V controller.
2019-01-03 10:38:39 -06:00
jmz52
c4237b529f
Fix MKS Mini and SD card conflct over SPI mode ( #12783 )
2019-01-03 10:27:53 -06:00
Phr3d13
01f75591c6
Fix GTM32_PRO_VB Serial and HAL via watchdog ( #12753 )
...
Move `watchdog_reset` from `.h` to `.cpp` to eliminate the need to include `MarlinConfig.h` in a HAL-related file.
2019-01-03 09:46:49 -06:00
Scott Lahteine
288340cb6c
Followup to VORON
2019-01-03 09:14:14 -06:00
Scott Lahteine
2aaa681dea
Remove unused Cheaptronic pins
2019-01-03 08:58:55 -06:00
Marcio Teixeira
81e753064a
Fix ExtUI compile warnings and error ( #12799 )
2019-01-03 08:36:43 -06:00
Ludy
74c47803f7
Add VORON printer ( #12705 )
2019-01-03 06:27:03 -06:00
kAdonis
637fb20c75
Allow 4 fan animation frames ( #12772 )
2019-01-03 06:03:06 -06:00
petieken
d9cf5e4883
Update pins_BIQU_SKR_V1.1.h ( #12758 )
2019-01-02 13:50:05 -06:00
TheLongAndOnly
cb643d87df
Adding missing code for triple Z-stepper auto-align ( #12786 )
2019-01-01 18:22:04 -06:00
Ludy
14a7faf087
Fix compile warning comparison uint and int ( #12788 )
2019-01-01 18:20:12 -06:00
Marcio Teixeira
60cb36bef3
Misc. improvements ( #12747 )
...
* Make ExtUI respect MAXTEMP limits
- Temperatures are now clamped by MAXTEMP limits rather than arbitrary values.
* Speed up USB init, add status
- Speed up USB initialization
- Show status message if init failed
* Enable status messages for EXTENSIBLE_UI
* Adjust max limit to MAX_TEMP - 15
* Misc. tweaks to formatting, const, etc.
2019-01-01 15:17:48 -06:00
InsanityAutomation
4f2473053c
Fix M106 with SINGLENOZZLE
2018-12-31 20:10:18 -06:00
Reece Kibble
7557f8d68c
Rename all Stm32f1 to STM32F1 ( #12639 )
2018-12-31 16:36:49 -06:00
Scott Lahteine
371d9a1acf
Fix line-endings, formatting, whitespace
...
Followup to #12770
2018-12-30 15:38:20 -06:00
Ludy
135c74017c
Fix compile DEBUG_EEPROM_READWRITE error ( #12746 )
2018-12-30 11:37:20 -06:00
Giuliano Zaro
54ba44ee37
Fix bad sanitycheck ( #12748 )
2018-12-30 10:44:15 -06:00
swilkens
b01a630bd0
[2.0.x] Correct Ender 3 bed size ( #12769 )
2018-12-30 10:42:47 -06:00
Alain Martel
44ed34475b
Add MKS BASE 1.4 pins ( #12770 )
2018-12-30 10:40:22 -06:00
Roxy-3D
3a16cb6d7f
Slightly Slower Max X Axis speed
...
On some T-Rex 2+ machines the previous max step rate could lose steps....
2018-12-28 09:14:48 -06:00
Ludy
814d93c7cf
Fix G33 sprintf output warning ( #12738 )
2018-12-27 18:05:42 -06:00
Ludy
3877bf9704
Fix compile error with delta and sensorless homing ( #12740 )
2018-12-27 17:51:22 -06:00
Ludy
cfc5e96b4b
Move JD to Config.h (and fix jerk->eeprom bug) ( #12720 )
2018-12-27 15:29:39 -06:00
Roman Moravčík
594898aea7
Limit hotend / bed temperature to maxtemp-15 ( #12713 )
2018-12-27 11:46:05 -06:00
InsanityAutomation
530ef5846f
Make nomove=false for toolchange on filament swap ( #12739 )
2018-12-27 11:38:35 -06:00
InsanityAutomation
14ddda285c
Confirmation on Abort SD print ( #12717 )
2018-12-27 11:36:39 -06:00
Msq001
f8c5d31864
Bugfix 2.0.x add motherboard pins define ( #12689 )
...
- `pins_BIQU_B300_V1.0.h` defines pins for B300, as found in the BIQU Thunder 3D printer.
- `pins_BIQU_SKR_V1.1.h` defines pins for bigtree/BIQU SKR V1.1 motherboard.
2018-12-27 10:52:35 -06:00
InsanityAutomation
b7a8dcc35d
Update Formbot T-Rex 3 pins ( #12662 )
2018-12-20 17:32:39 -06:00
Ludy
f7127c44f8
Wanhao Duplicator i3 Plus pins create ( #12701 )
2018-12-20 17:30:36 -06:00
jmz52
33abb86b7e
Add support for MKS Robin board ( #12650 )
...
Implement initial support for MKS Robin (STM32F103ZET6) board.
Custom build script is used to generate encrypted firmware compatible with original MSK Robin bootloader (i.e. safe firmware update from SD card and possibility to go back to original close-source firmware).
2018-12-20 17:23:27 -06:00
InsanityAutomation
367a9f65aa
Add Formbot 350c Thermistor ( #12661 )
2018-12-20 17:04:17 -06:00
Ludy
33f3c75213
GTM32 Pro VB FAN-PIN correction ( #12666 )
2018-12-20 16:42:15 -06:00
Scott Lahteine
9d59a9c840
Followup to #12691 (typo)
2018-12-20 16:38:32 -06:00
Ludy
3829d6ccf8
FYSETC F6 13 - E2_SERIAL_TX_PIN correction ( #12667 )
2018-12-20 16:11:33 -06:00
Kadah
d35dcafa3d
Added MKS MINI 12864 support to FYSETC F6 V1.3 ( #12656 )
2018-12-20 16:10:49 -06:00
Roman Moravčík
98cf546771
Limit set hotend temperature to maxtemp. ( #12690 )
2018-12-20 15:56:37 -06:00
Roman Moravčík
4dad489a50
[2.0.x] Limit PID autotune target to maxtemp-15 ( #12691 )
2018-12-20 15:55:30 -06:00
Marcio Teixeira
8dcc28c9ae
Squelch warning mentioned in #11061 ( #12676 )
2018-12-20 15:34:24 -06:00
Ondřej Nový
4c8a6eee7b
[2.0.x] Update Czech translation ( #12683 )
2018-12-20 15:28:46 -06:00
Ondřej Nový
fcaed685b2
[2.0.x] Set DEFAULT_NOMINAL_FILAMENT_DIA to 1.75 in Anet A6 config ( #12664 )
2018-12-18 13:35:59 -06:00
Ondřej Nový
0572be9439
[2.0.x] Enable PIDTEMPBED in Anet A8 example config ( #12655 )
2018-12-18 13:34:46 -06:00
Luc Van Daele
c6e09c2689
[2.0.x] G33 clean up ( #12648 )
...
Remove obsolete workarounds in G33 for the now fixed zprobe_zoffset bug
2018-12-18 12:43:38 -06:00
teemuatlut
7a5e637a37
Add spreadCycle parameter sets ( #12645 )
2018-12-18 12:42:14 -06:00
Marcio Teixeira
902d5b0f8b
Allow ExtUI to use LCD_SET_PROGRESS_MANUALLY ( #12628 )
2018-12-12 17:21:37 -06:00
Dave Johnson
9a4a463ec4
Sanity-check LIGHTWEIGHT_UI, move comment up ( #12630 )
2018-12-12 16:59:20 -06:00
teemuatlut
55144284c2
TMC connection test, spreadCycle parameters, improved debugging ( #12616 )
2018-12-09 20:54:48 -06:00
Ludy
97de9d54a5
Fix broken pins file include ( #12617 )
2018-12-09 19:06:03 -06:00
Ludy
a7b3a61424
Improve some config comments readability ( #12615 )
2018-12-09 19:02:42 -06:00
Scott Lahteine
daf07e4200
Align classic bed icon consistently
2018-12-09 12:00:10 -06:00
MasterPIC
3bb8b3529a
Center ABL grid on bed with H parameter. ( #12610 )
2018-12-09 11:24:48 -06:00
Scott Lahteine
6cf8d40f41
Fix some serial echos of pin states
2018-12-09 02:38:32 -06:00
Scott Lahteine
f6321f878a
Simpler AVR + Trinamic + Soft Serial sanity-check ( #12606 )
2018-12-08 23:34:26 -06:00
Scott Lahteine
7d15854514
Add Z_MIN_PROBE_PIN to MKS SBASE pins
2018-12-08 15:31:59 -06:00
Scott Lahteine
e8bda62d2a
Followup to servo angles patch
...
Fix #12594
2018-12-08 15:31:59 -06:00
Scott Lahteine
18fedafbc5
Refresh screen on SD Init
2018-12-08 15:31:59 -06:00
Marcio Teixeira
b22716e938
M425 Backlash Correction ( #11061 )
2018-12-08 14:36:46 -06:00
Scott Lahteine
fa47ce369a
Sanity-check for negative steps, feedrate, accel
2018-12-07 19:38:15 -06:00
Scott Lahteine
ef81b5f03e
Link to font docs in ultralcd_DOGM.cpp
2018-12-07 19:10:55 -06:00
Scott Lahteine
4388015f1a
Tweak config formatting
2018-12-07 16:57:14 -06:00
Scott Lahteine
b7e38ea249
Signal an invalid mesh for M420 enable / load
2018-12-07 16:14:11 -06:00
teemuatlut
50b2fbd031
Trinamic: Split stealthChop, improve driver monitoring, etc. ( #12582 )
2018-12-07 15:34:21 -06:00
Scott Lahteine
9fbd73d931
Fix up some delta settings
2018-12-05 18:57:47 -06:00
Dave Johnson
0947b92734
Build and CI fixes and optimizations ( #12584 )
...
-Disable LDF "deep+" mode on AT90USB platforms. Appears not needed any longer (likely due to fix 7322df26ad
2018-12-05 17:21:40 -06:00
mr-miky
11c7945365
Don't include STM32 Core code when compiling STM32 Generic ( #12575 )
2018-12-03 06:55:49 -06:00
Scott Lahteine
64389acdf1
Print a space after scrolling status
2018-12-03 06:17:09 -06:00
Scott Lahteine
7a361ad36a
Alternative fan image option ( #12579 )
...
* Alternative fan bitmap
* Move bed over by 3px
2018-12-03 05:55:33 -06:00
Scott Lahteine
261c6f4b96
Fix pause/resume SD print
...
Followup to #12551 , addressing #12566
2018-11-30 19:23:08 -06:00
Scott Lahteine
2224a4d61a
Remove AVR-only MARLIN_DEV_MODE code
2018-11-30 17:54:24 -06:00
Scott Lahteine
e874f9664c
Tweaks to endstops code
2018-11-30 14:25:55 -06:00
Scott Lahteine
3c58b16c9f
Move stepper enable/disable to stepper_indirection.h ( #12562 )
2018-11-30 12:48:46 -06:00
Scott Lahteine
aaf862aef2
Fix angles for disabled EDITABLE_SERVO_ANGLES ( #12559 )
2018-11-30 12:31:42 -06:00
Scott Lahteine
c986239837
A single SERIAL_ECHO macro type ( #12557 )
2018-11-29 16:58:58 -06:00
Scott Lahteine
69d869c3d9
Tweak FR icon. Update font data.
2018-11-29 12:59:30 -06:00
Scott Lahteine
0c1cd9f590
Fix "No SD Card" indicator
2018-11-29 12:35:31 -06:00
Jacob Jordan
8be91677df
Fix Skew factors ( #12555 )
...
- Ensure Skew factors are calculated from test square measurements
2018-11-29 11:39:31 -06:00
Scott Lahteine
03ef2d6c82
Fix "paused" message and M125 called by M25 ( #12551 )
2018-11-28 19:28:31 -06:00
Scott Lahteine
95d154a91f
Fans loop macro
2018-11-28 16:45:08 -06:00
Scott Lahteine
61db0b65b6
Followup to heating progress
2018-11-28 14:47:43 -06:00
Scott Lahteine
4f9ec9ab45
Add heating progress bars ( #12543 )
2018-11-27 21:15:52 -06:00
Scott Lahteine
929a513a6b
Add poll_runout_states, which returns 1 for runouts ( #12547 )
2018-11-27 20:13:24 -06:00
Scott Lahteine
01b5c810d5
Space out multiple edit lines a bit
2018-11-27 18:10:19 -06:00
Scott Lahteine
cd88ea2106
Fix runout debug output
...
Followup to #12544
2018-11-27 18:10:19 -06:00
Scott Lahteine
cecc238f68
Save recovery info on SD pause
2018-11-27 14:42:19 -06:00
Marcio Teixeira
439a3e8463
Improve runout sensor, fix LIGHTWEIGHT_UI screen size ( #12544 )
2018-11-27 13:45:25 -06:00
Scott Lahteine
5b24ce9024
Hide M217 compile warning
2018-11-26 16:52:16 -06:00
David Bates
d94b50a3d8
Add sample config for Delta with MKS SBASE ( #10819 )
2018-11-25 21:23:02 -06:00
InsanityAutomation
dec721c52b
Add Formbot Raptor2 and Raise3D pins ( #12532 )
...
* Add Formbot Raptor2 board
* Add Raise3D Rumba board
2018-11-25 19:56:06 -06:00
Scott Lahteine
6aae199572
Add missing boards to Makefile
2018-11-25 19:11:09 -06:00
Scott Lahteine
0a638cc022
Adjust Formbot Raptor pins
2018-11-25 18:35:45 -06:00
Ludy
e5019a0481
Fix English special symbols ( #12529 )
2018-11-25 18:19:12 -06:00
Scott Lahteine
09d6db491a
Fix wait_for_bed compile error
2018-11-25 18:05:41 -06:00
Roman Moravčík
d545f984b0
Update Slovak translation ( #12523 )
2018-11-25 17:44:51 -06:00
Ludy
730f223100
Correct FANMUX2_PIN ( #12538 )
2018-11-25 17:27:41 -06:00
Yücel Temel
d857cdfb27
Update Turkish language ( #12524 )
2018-11-25 17:26:26 -06:00
Scott Lahteine
4a7c6f7241
NUM_ARRAY => COUNT
2018-11-24 00:27:45 -06:00
Giuliano Zaro
31113c5adf
Update Italian language ( #12512 )
2018-11-24 00:26:54 -06:00
Scott Lahteine
b57343c255
Put status screen options in Configuration_adv.h
2018-11-23 23:15:07 -06:00
Scott Lahteine
1fcc13b011
Allow Serial Overrun Protection to be disabled
2018-11-23 21:07:38 -06:00
Scott Lahteine
29c53f2402
Hide some compile warnings
2018-11-23 21:07:38 -06:00
Scott Lahteine
caca3c8503
Use wait_for_bed with WAIT_FOR_BED_HEATER
...
Addressing #12517
2018-11-23 20:39:23 -06:00
Scott Lahteine
f1efcfed14
Fix backslash in language_test.h
2018-11-23 20:39:23 -06:00
Yücel Temel
3b186a55ac
Don't show superscript ³ with NOT_EXTENDED_ISO10646_1_5X7 ( #12513 )
2018-11-23 20:16:51 -06:00
Scott Lahteine
82c96c971e
Bring superscripts slightly lower in BDF fonts
2018-11-23 20:02:34 -06:00
Sinisa Culic
8a0992d921
Fast PWM for controller fan ( #12485 )
2018-11-23 16:03:39 -06:00
Ludy
e98d195901
Remove extra declarations in cardreader.cpp ( #12520 )
2018-11-23 15:58:20 -06:00
Scott Lahteine
fd2998efd5
Revert ADC_KEYPAD direction behavior ( #12508 )
2018-11-22 06:00:00 -06:00
Scott Lahteine
d29cb09b3e
Fix a minor compile warning
2018-11-22 05:35:38 -06:00
Yücel Temel
5b1d52671c
Use superscript 3 in language_en.h ( #12504 )
2018-11-22 02:27:28 -06:00
Marcio Teixeira
7109dadd21
Additional pin definitions for Archim 2 ( #12500 )
...
- Added GPIO pins to Archim 2
- Added new 108 pin to `fastio_Due.h`
2018-11-22 01:07:02 -06:00
Andy Shaw
4975b13b74
Fix problems with LPC1768 EEPROM flash emulation ( #12503 )
...
* Remove duplicate calls to PrepareSector
Some flash memory API calls require that a call to `PrepareSector` is done before use. However this call is already made by the LPC1768 framework so the calls in this code are not required.
* Ensure correct alignment of RAM buffer
The LPC176X flash API requires that the RAM buffer used for write operations must be word-aligned. This change ensures that this is the case.
2018-11-22 01:03:32 -06:00
Scott Lahteine
b738972e69
General cleanup of Re-ARM pins
2018-11-21 19:00:49 -06:00
Scott Lahteine
ee423dcdd0
Invert hotend bitmaps, by default
2018-11-21 01:02:06 -06:00
Scott Lahteine
c5642a894f
Fix ADC_KEYPAD middle button ( #12493 )
2018-11-20 21:39:30 -06:00
Scott Lahteine
0946cbcdca
Revert some const changes (for now)
2018-11-20 08:19:48 -06:00
Scott Lahteine
4def8b3b5e
Expanded options for _Statusscreen.h ( #12455 )
...
See the PR for full details. The updated system will be documented on the website in the near future.
2018-11-20 07:50:37 -06:00
Scott Lahteine
d51e5690f4
Don't show updir with no card present
2018-11-20 07:01:46 -06:00
Scott Lahteine
ec9d21a234
Shift YZ on graphical display to fit Z+123.45
2018-11-20 06:58:18 -06:00
Scott Lahteine
817a37169a
Apply/unapply const here and there
2018-11-20 06:44:21 -06:00
Scott Lahteine
643e0066a0
Followup to #12451
2018-11-20 06:27:19 -06:00
Marcio Teixeira
4bcb63b705
Fix for #12482 ( #12483 )
...
Fix Z-move to uninitialized position in SWITCHING_EXTRUDERS tool_change (no_move=true)
2018-11-20 00:04:11 -06:00
Marcio Teixeira
50ee747787
Fix compilation errors. Followup to #12439 ( #12481 )
2018-11-20 00:02:13 -06:00
Ludy
90a58488b5
Corrected unused var, default switch, Travis tests ( #12477 )
2018-11-19 23:59:48 -06:00
Scott Lahteine
a4c15dc54f
Modify MBL to use IJ instead of XY ( #12478 )
2018-11-19 09:08:15 -06:00
Scott Lahteine
fc3f1c4572
Get u8g reference for lcdprint
2018-11-19 06:23:15 -06:00
Scott Lahteine
88c57eaf55
Clean up some u8g code ( #12476 )
2018-11-19 01:33:59 -06:00
Ludy
1f93d2bcf7
Fix LCD compile error, etc. ( #12472 )
2018-11-18 20:39:49 -06:00
Scott Lahteine
826d570162
Combine Travis CI option-setting commands ( #12474 )
2018-11-18 19:58:02 -06:00
Scott Lahteine
9d13f07d09
GTM32 Pro VB changes from Markku Sinisalo
2018-11-18 19:56:38 -06:00
Roman Moravčík
5fbe5cabc8
Fixed displaying of kill MSG_OUTAGE_RECOVERY string. ( #12470 )
2018-11-18 18:05:29 -06:00
kAdonis
4ae9a06c60
Update M303.cpp ( #12471 )
2018-11-18 18:04:51 -06:00
Ludy
c0b75f49b6
Fix "no effect" and "unused variable" compile warnings ( #12473 )
2018-11-18 17:54:00 -06:00
Nils Hasenbanck
5a4fd8e0a6
Fix access to the DWT peripheral for STM32 HAL ( #12434 )
...
Access to the DWT peripheral for the `CYCCNT` register needs to happen before `main()`. The code needs to be called after the setup of the system clocks, so the right place is between the `premain()` and `main()` function of the STM32 Arduino core.
This patch moves the DWT access code to a new function, which is then placed between `premain()` and `main()`.
2018-11-18 01:30:46 -06:00
Scott Lahteine
7f225b9421
Fix MAX_MESSAGE_LENGTH
2018-11-18 01:11:26 -06:00
Scott Lahteine
06674a321a
Remove extra include
2018-11-18 00:34:07 -06:00
Marcio Teixeira
c1e17037e5
Various fixes for MarlinUI and ExtUI ( #12439 )
2018-11-17 22:21:44 -06:00
Giuliano Zaro
d3605cfc26
Don't start watching heaters when target is 0 ( #12453 )
2018-11-17 21:53:52 -06:00
Ludy
93e958f695
Fix compile error with ZONESTAR_LCD+NO_LCD_MENUS ( #12466 )
2018-11-17 21:21:30 -06:00
Ludy
22d7fed60a
Fix compile error with SD_FIRMWARE_UPDATE ( #12462 )
2018-11-17 21:13:36 -06:00
Nils Hasenbanck
779b2709ec
Change temperature pin order for RemRam V1 ( #12458 )
...
Beta testers suggested to adopt the RAMPS order of temperature probe connectors. This commit fixes the order to the RAMPS order.
2018-11-17 16:51:06 -06:00
Scott Lahteine
8ebb4dc294
Followup to static CardReader
2018-11-17 07:52:35 -06:00
Scott Lahteine
7ee5894360
Allow float XY probe offsets
...
Responding to #12383
XY probe offsets should be integers because adding decimal points makes the code larger. But if decimals are very much wanted, this commit removes the old restriction.
2018-11-17 07:44:47 -06:00
Giuliano Zaro
43ecdb606f
Fix a compile warning ( #12452 )
2018-11-17 07:08:25 -06:00
Ph0non
984c4ba8c7
Enable SD Card on RepRap Display and RADDS ( #12446 )
...
* Enable SD Card on RepRap Display and RADDS
Define the necessary pins in `pins_RADDS.h` (copied from the `RADDS_DISPLAY` section) for the use of the SD card slot on RRD.
2018-11-17 06:59:40 -06:00
Ludy
56a94c2a26
Use 'target_extruder' in M104 as with M109 ( #12448 )
2018-11-17 06:55:25 -06:00
Scott Lahteine
66580f32c2
Make CardReader class static ( #12451 )
...
* Make CardReader a static class
* Make CardReader flags into bitfields
2018-11-16 22:39:16 -06:00
Scott Lahteine
3e9ffaddb6
Consolidate, optimize some LCD menu code ( #12450 )
2018-11-16 21:44:48 -06:00
Scott Lahteine
d97e31db4c
Optimize Power-Loss Recovery ( #12440 )
2018-11-16 20:47:07 -06:00
Mateusz Krawczuk
ca21ac6b9b
Support two MAX6675 thermocouples ( #8686 )
2018-11-16 18:20:33 -06:00
Scott Lahteine
0e610815e4
No need for Cap:PAREN_COMMENTS
2018-11-16 04:28:40 -06:00
Scott Lahteine
7a075a5dc9
Tweak extruder errors
2018-11-16 01:32:21 -06:00
Scott Lahteine
2d92f333f5
Fix GcodeSuite::T active_extruder reference
2018-11-15 14:07:24 -06:00
Scott Lahteine
d2bb53702a
Optimize target_extruder, ignore T with mixing ( #12432 )
...
* Optimize target_extruder, ignore T with mixing
* Give G-code Tn parity with tool_change
2018-11-14 17:33:04 -06:00
Marcio Teixeira
5e586a6b39
Fix to runout sensor code. ( #12431 )
...
- "old_state" is no longer a class static variable.
2018-11-14 16:54:05 -06:00
Scott Lahteine
d82c350de7
Miscellaneous LCD code renaming, reordering ( #12430 )
...
* Move special characters to language.h
* Apply some naming standards
* Clean up menu item draw functions
* Rename some Temperature methods
* UI => ExtUI
2018-11-14 13:13:51 -06:00
Scott Lahteine
edfd106bc5
Rejigger Filament Runout class ( #12428 )
2018-11-14 11:45:57 -06:00
Scott Lahteine
f4c128ecaa
Move RRW keypad code to a common method ( #12429 )
2018-11-14 06:00:21 -06:00
Scott Lahteine
54ec5528a0
hasstatus => has_status
2018-11-14 01:34:28 -06:00
Scott Lahteine
ebf585b673
Fix an old sanity check
2018-11-14 01:15:35 -06:00
Ryan
052d102ded
UltiMachine Archim 1 support ( #12404 )
2018-11-14 00:27:39 -06:00
Scott Lahteine
664e20754d
Clean up pins files
2018-11-14 00:23:33 -06:00
Scott Lahteine
1eb5249598
Fix Formbot Trex-2+ configs
...
Followup to #12422
2018-11-13 21:53:54 -06:00
thiagodesacosta
075a22ed65
Update Portuguese-Brazilian translation ( #12402 )
2018-11-13 19:42:25 -06:00
Marcio Teixeira
3ceab8474c
Add required "cardreader.h" include ( #12419 )
2018-11-13 17:12:44 -06:00
Giuliano Zaro
98c2fc4e42
Endstops fix followup ( #12423 )
...
Followup to #12413
2018-11-13 17:10:07 -06:00
Roxy-3D
f19fd642ce
Updates to Formbot T-Rex 2+ configuration files ( #12422 )
...
Updates to Formbot T-Rex 2+ configuration files
2018-11-13 13:48:35 -06:00
Roxy-3D
cda5ef08fa
Debug of G2-G3 for UBL ( #12386 )
...
Changes only affect UBL. Everything else is left alone.
2018-11-13 11:20:21 -06:00
AnHardt
9ad3aed0ef
Fix tool-change for MIXING_EXTRUDER with < 2 virtual tools ( #12417 )
...
Fix #12416
Better handling of `ENABLED(MIXING_EXTRUDER) && !MIXING_VIRTUAL_TOOLS > 1` - to not fall through to the general case. Fix compiler warnings for `#elif EXTRUDERS < 2`.
2018-11-13 04:56:10 -06:00
Giuliano Zaro
d631267548
Refine endstops fixes ( #12413 )
...
When endstops/probe are enabled `ENDSTOP_NOISE_THRESHOLD` calls to `update` are required to properly re-sync endstops/probe status.
2018-11-13 04:31:58 -06:00
Scott Lahteine
0ee1a92971
Group status methods, share reset_status with Extensible UI ( #12414 )
...
* Group status methods, share reset_status with Extensible UI
* Move common DOGM code to headers
2018-11-13 01:47:45 -06:00
Scott Lahteine
690c4e8457
Clean TLM trailing whitespace
2018-11-13 00:03:34 -06:00
Scott Lahteine
143b2896e0
Add M412 to enable/disable filament runout detection ( #12406 )
2018-11-12 21:29:46 -06:00
Scott Lahteine
a163c89c6a
Followup to 50af1d1
2018-11-12 20:31:53 -06:00
AnHardt
be6271767f
Fix BABYSTEP_ZPROBE_OFFSET ( #12408 )
...
Fix #12399
Did not compile without `WATCH_HOTENDS || WATCH_THE_BED`.
Add condition to include "../../module/temperature.h".
2018-11-12 17:44:21 -06:00
Scott Lahteine
50af1d1e08
Differentiate translated On/Off from Serial ON/OFF
2018-11-12 17:23:08 -06:00
Scott Lahteine
df907a905f
Update UBL comments for debug change
2018-11-12 03:46:48 -06:00
Scott Lahteine
da17f8ad37
For now (!) don't synchronize in M204 and M205
...
See if this has any deleterious effect on motion planning by slicers that inser their own jerk and acceleration controls. The problem I see is that these settings can take effect on blocks already in the planner, and the only way around this would be to shadow these settings in planner blocks and use the shadowed settings in the planner.
2018-11-12 02:43:24 -06:00
Scott Lahteine
a3923424c7
Clean up LCD width/height determination
2018-11-12 02:37:40 -06:00
Scott Lahteine
a0c795b097
Encapsulate common display code in a singleton ( #12395 )
...
* Encapsulate common LCD code in a singleton
* Depend more UBL code on UBL_DEVEL_DEBUGGING
- Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 12:16:24 -06:00
Scott Lahteine
9da6809ac3
Adjust some comment spacing
2018-11-11 11:28:50 -06:00
Scott Lahteine
471f403a67
Reduce code size with plain inlines
2018-11-11 08:36:10 -06:00
Scott Lahteine
30a49f5ee2
Apply extra condition to LCD_PROGRESS_BAR
2018-11-11 08:36:10 -06:00
Scott Lahteine
4e0c935959
Update HAL and libs formatting
2018-11-10 19:43:23 -06:00
Scott Lahteine
47483e8c17
Update Raptor config
2018-11-10 19:42:46 -06:00
Scott Lahteine
6093df11dc
Allow G26 to use the active extruder ( #12387 )
...
* Make lcd_quick_feedback argument optional
* Add click_to_cancel option to wait_for_hotend/bed
* Have G26 use the active nozzle and wait_for_hotend/bed
* Use wait_for_release in UBL G29
* Add 'T' parameter to G26 for an initial tool-change
2018-11-10 18:07:38 -06:00
articide
4260282df7
Tevo Little Monster example configuration ( #12370 )
2018-11-10 03:36:01 -06:00
Scott Lahteine
bed15fcd81
Tweak 'echo_not_entered' used by MBL's G29
2018-11-10 01:32:51 -06:00
Scott Lahteine
c239131ff5
Use 'serial_spaces' in 'print_2d_array'
2018-11-10 01:32:51 -06:00
Scott Lahteine
56150ec030
Add reference comments to MeshLevelingState
2018-11-09 21:31:20 -06:00
Ludy
24c5e57bb6
Update German language ( #12379 )
2018-11-09 15:25:29 -06:00
Giuliano Zaro
fd7fd55662
Solve endstops issues ( #12382 )
...
- Partially reverts #11900 and tries to solve #12336
2018-11-09 14:58:04 -06:00
Scott Lahteine
78ccedd6a8
Fix M91x sanity-check to permit TMC2660
...
Fix #12362
2018-11-09 05:48:15 -06:00
revilor
b60abc7c37
[2.0.x] Macro G-codes ( #9365 )
2018-11-09 05:25:08 -06:00
Giuliano Zaro
ccdbf20f60
Update Italian language ( #12368 )
2018-11-09 04:04:02 -06:00
Roman Moravčík
d08847b1a6
Update Slovak translation ( #12376 )
2018-11-09 04:03:07 -06:00
InsanityAutomation
7665dff58b
No error on T0 with single-extruder and fix MIXING_EXTRUDER virtual tools ( #12375 )
2018-11-09 00:15:07 -06:00
Scott Lahteine
4ed6397e5d
More comprehensive NO_LCD_MENUS ( #12367 )
2018-11-09 00:07:16 -06:00
Scott Lahteine
9c8f083d6c
Extend pins errors to include the processor
2018-11-08 22:25:59 -06:00
Scott Lahteine
525ea554a1
Remove obsolete comments
2018-11-08 10:55:18 -06:00
Scott Lahteine
ef724edd80
Apply HAS_LCD_MENU in EEPROM code
2018-11-08 10:03:05 -06:00
Scott Lahteine
b169320a03
Clean trailing whitespace
2018-11-07 02:40:18 -06:00
Scott Lahteine
81b1e9d272
Fix up xdiff, ydiff, zdiff in tool change
...
Followup to #12137
2018-11-06 22:56:33 -06:00
InsanityAutomation
6471a75a22
Combine more tool-change variables ( #12137 )
2018-11-06 22:22:20 -06:00
Scott Lahteine
147e270208
Restore GTM32_PRO_VB temp and heater pins
...
Undo #12345
2018-11-06 21:41:30 -06:00
Scott Lahteine
8def25e475
Set CUSTOM_MACHINE_NAME for some configs
2018-11-06 21:41:30 -06:00
Scott Lahteine
812f6a7dd7
Fix Resume from SD Pause
...
In reference to https://github.com/MarlinFirmware/Marlin/pull/12098#issuecomment-436231690
2018-11-06 21:09:37 -06:00
Scott Lahteine
4f72e041f2
Use card.stopSDPrint() for completeness
2018-11-06 20:55:17 -06:00
Scott Lahteine
488a17b3f5
Use IS_SD_PRINTING() more
2018-11-06 20:55:17 -06:00
Marcio Teixeira
4dbaa6369f
Fix const pointer assignment compile error ( #12350 )
2018-11-06 19:49:39 -06:00
Giuliano Zaro
959ed32636
Update Italian language ( #12352 )
2018-11-06 19:30:24 -06:00
Roman Moravčík
812bfec65e
Update Slovak translation ( #12354 )
2018-11-06 19:29:28 -06:00
Ludy
1624722566
Update German translation ( #12355 )
2018-11-06 19:28:40 -06:00
Scott Lahteine
e574f01568
More advanced pause tweaks ( #12356 )
...
* Followup to LCD_TIMEOUT_TO_STATUS=0
* Make continuous purge screen fit 20x4
* Unify purge message modes
* Preserve last-set pause header mode
2018-11-06 19:25:57 -06:00
Scott Lahteine
5a470d4a49
Apply some tool-change cleanup
2018-11-06 18:20:01 -06:00
Roman Moravčík
34ea458667
Fixed advanced pause messages ( #12353 )
2018-11-06 15:27:19 -06:00
Scott Lahteine
4c5ca89d8c
Show the appropriate pause message ( #12348 )
2018-11-06 04:13:48 -06:00
Marcio Teixeira
8517d5f915
LCD menu code refactoring and cleanup ( #12308 )
2018-11-05 22:51:10 -06:00
Scott Lahteine
b3b4e6dc45
Change Marlin debug flag names to fix conflicts ( #12340 )
...
In reference to #11000
2018-11-05 22:48:28 -06:00
Giuliano Zaro
f7e682eeee
Update Italian language ( #12344 )
2018-11-05 22:46:59 -06:00
Phr3d13
a813900fce
Add Geeetech Rostock 301 config, update GTM32 Pro VB pins ( #12345 )
2018-11-05 22:42:06 -06:00
Scott Lahteine
04f173790f
Remove trailing whitespace
2018-11-05 22:38:20 -06:00
Scott Lahteine
c536ee1122
Clean up bq Zum Mega 3D pins
2018-11-05 22:38:20 -06:00
Scott Lahteine
c31e1735dd
Restore LPC1768_PIN_INTERRUPT_M, apply to Z3
...
- In reference to #12166
2018-11-05 06:28:49 -06:00
Scott Lahteine
93d5b945dd
Hide mesh editing until a valid mesh exists
2018-11-05 05:13:34 -06:00
Ludy
f34f09c821
Update German language ( #12336 )
2018-11-05 04:33:31 -06:00
Roman Moravčík
eefd7676a3
Updated slovak translation ( #12338 )
2018-11-05 04:31:12 -06:00
Scott Lahteine
486f2a66a9
Fix MBL XY parameter error messages
...
Fix #11522
2018-11-05 04:17:37 -06:00
Scott Lahteine
2613ddf61c
Fix "circle"
2018-11-05 04:17:37 -06:00
Scott Lahteine
b779b42ffd
Prevent current step-down going negative
...
Addressing #11348
2018-11-05 04:17:37 -06:00
Scott Lahteine
427bc64ba1
G28 O respects HOME_AFTER_DEACTIVATE
...
Addressing #11271
2018-11-05 04:17:37 -06:00
Scott Lahteine
3866aeac52
Clean up ENCODER_RATE_MULTIPLIER config
2018-11-05 04:17:37 -06:00
Scott Lahteine
498dfa291e
Update and fix CHDK
2018-11-05 04:17:37 -06:00
Scott Lahteine
fed84f2961
Use multiplier edit item for mesh point editing
2018-11-05 04:17:37 -06:00
Scott Lahteine
d5ab4cd22a
Provide a default for Z_PROBE_LOW_POINT
2018-11-05 04:17:37 -06:00
Scott Lahteine
3cbc3ecdd7
Fix 'M43 T' to use 'L' as last pin
...
- The documentation is correct. The code was wrong.
2018-11-05 04:17:37 -06:00
Scott Lahteine
1769249876
Recommend keeping endstops off
2018-11-05 04:17:37 -06:00
Scott Lahteine
5182eaf661
Fix endstops enable behavior during probing
...
Fix a bug introduced in #9582
2018-11-05 04:17:37 -06:00
Scott Lahteine
07a0822ebe
M420 support in MARLIN_DEV_MODE
2018-11-04 20:54:38 -06:00
Scott Lahteine
63be48ada6
Add MESH_EDIT_MENU to example configs
2018-11-04 19:07:47 -06:00
KangDroid
82ff7c6542
Add a mesh edit menu for MBL / ABL-Bilinear
2018-11-04 19:07:47 -06:00
Scott Lahteine
44fa7fb18c
Cleanups for leveling-related code
2018-11-04 19:07:47 -06:00
Scott Lahteine
cc2bc67440
ENABLED(NEWPANEL) => HAS_LCD_MENU
2018-11-04 19:06:10 -06:00
Scott Lahteine
fc84878cba
MSG_UBL_EDIT_MESH_MENU => MSG_EDIT_MESH
2018-11-04 19:06:10 -06:00
Scott Lahteine
cd066bfeba
Extend error messages for E factors sanity-checks
2018-11-04 18:42:56 -06:00
Ludy
c10edb0998
Update, correct sanity-checks for up to 6 extruders ( #12333 )
2018-11-04 18:36:45 -06:00
Scott Lahteine
0c85869c26
Clean up file endings
2018-11-04 18:30:10 -06:00
Scott Lahteine
b99f0776d6
Clean up some U8G files
2018-11-04 18:30:10 -06:00
Scott Lahteine
8014e1cc9d
Allow disable of LCD_TIMEOUT_TO_STATUS (when 0)
2018-11-04 18:30:10 -06:00
Giuliano Zaro
bd05816fd8
Update Italian language ( #12327 )
2018-11-04 16:43:02 -06:00
Scott Lahteine
3c21483c88
Provide DOGLCD SPI pins for MKS SBASE + VIKI
2018-11-04 16:20:22 -06:00
Scott Lahteine
e0956bb572
Drop 'register' storage specifier
2018-11-04 16:17:13 -06:00
Scott Lahteine
c04cf127f7
Fix EEPROM servo angles init, section grouping
2018-11-04 16:14:54 -06:00
Scott Lahteine
9c0e05552e
Suppress some compile warnings
2018-11-04 15:25:31 -06:00
Karl Andersson
176654791e
Use board-specific or platform SPI pins in HAL_STM32 ( #12323 )
2018-11-04 15:03:45 -06:00
Scott Lahteine
60dbd8161c
Fix VMAX editing
...
Fix #12326
2018-11-04 07:06:14 -06:00
Scott Lahteine
b7ca93ba37
Remove dead comment
2018-11-04 06:10:35 -06:00
Scott Lahteine
608be966d7
Add servos to pins_FYSTEC_F6_13.h
2018-11-04 06:10:35 -06:00
Hannes Brandstätter-Müller
67b22760d9
Return to status to show manual deploy/stow messages ( #12324 )
2018-11-04 04:51:26 -06:00
tharts
f5e8e8b53d
Fix broken LPC176x build ( #12317 )
...
* Fix broken LPC176x build
* Add UBL+HD44780 test for LPC1768
2018-11-04 04:25:03 -06:00
Scott Lahteine
f5eab912ed
Apply #pragma once, misc cleanup ( #12322 )
...
* Apply #pragma once in headers
* Adjust some thermistors formatting
* Misc cleanup and formatting
2018-11-04 02:25:55 -06:00
Scott Lahteine
8696f882a9
Merge pull request #12313 from thinkyhead/bf2_scara_home_offset
...
Revive SCARA home offset (not fully implemented)
2018-11-03 07:05:24 -05:00
Scott Lahteine
56d2dcb184
Use first_page flag in place of page.page == 0
2018-11-03 06:59:21 -05:00
Scott Lahteine
d1ff22b983
Revive SCARA's home offset (unimplemented)
2018-11-03 06:24:41 -05:00
Scott Lahteine
2c9586be0c
Clear up HAS_WORKSPACE_OFFSET meaning
2018-11-03 04:06:37 -05:00
Scott Lahteine
6e3caf23b6
IS_DELTA => ENABLED(DELTA)
2018-11-03 03:57:11 -05:00
Scott Lahteine
19f49db96f
Tweak / reduce menu items
2018-11-03 01:18:59 -05:00
Scott Lahteine
e4cf175163
Synchronize on M204, M205 ( #12302 )
...
* Add parser.seen for multiple parameters
* Fix M666, use !seen for report
* Synchronize on M204, M205
2018-11-03 01:16:37 -05:00
Ludy
5ba6607181
Fix keypad-related compile error ( #12306 )
2018-11-02 22:29:32 -05:00
Scott Lahteine
2fb2e286ee
Followup to #12256
2018-11-02 01:32:24 -05:00
Scott Lahteine
3eb9838dca
Simplify TMC sanity-checks
2018-11-02 01:15:49 -05:00
Scott Lahteine
f5b31e218d
Followup to #12082
2018-11-02 01:15:27 -05:00
Scott Lahteine
31c28d0dd2
Drop pgm_read_*_near and let headers choose ( #12301 )
...
- Drop `pgm_read_*_near` and let headers choose.
- Define `USE_EXECUTE_COMMANDS_IMMEDIATE` as a conditional.
- Add `process_subcommands_now` for SRAM-based commands.
2018-11-02 00:42:16 -05:00
Scott Lahteine
fce150f094
inline static => static inline
2018-11-01 23:15:17 -05:00
Giuliano Zaro
323c088356
Restore LED light color after pid tuning ( #12082 )
2018-11-01 22:04:19 -05:00
Ludy
9f77df2590
Followup to menu refactor. TMC warnings, sanity. ( #12288 )
...
- Followup fixes for menu refactor
- Fix TMC sanity checks, unused var warnings
2018-11-01 16:13:33 -05:00
Nils Hasenbanck
cafabf2055
Implement DELAY_NS with CYCCNT on Cortex-M7 ( #12283 )
2018-11-01 16:11:51 -05:00
Scott Lahteine
f5498168ae
Ensure PENDING/ELAPSED use a 32-bit integer
2018-11-01 16:08:23 -05:00
MasterPIC
6e041b9c61
Use blink to show more info on LCD ( #12256 )
2018-11-01 15:56:12 -05:00
Scott Lahteine
eb5600acd2
Add parentheses to LCD_CLICKED
2018-11-01 15:06:14 -05:00
Scott Lahteine
42f8b6c530
Make M125 work with SDSUPPORT ( #12289 )
2018-11-01 15:03:45 -05:00
Scott Lahteine
f319087372
Followup to #12293
2018-11-01 14:41:03 -05:00
AnHardt
74bbb13008
Fix Mixer calculations for 32-bit processors ( #12293 )
2018-11-01 14:38:45 -05:00
Scott Lahteine
549d11225a
Add to description of Z_STEPPER_AUTO_ALIGN
...
In response to #12272
2018-10-31 18:07:20 -05:00
Scott Lahteine
2cff0d1f39
Move menu_level_bed_corners to its own file
2018-10-31 17:44:42 -05:00
Scott Lahteine
44f2a82a56
Move axis_homed, axis_known_position to motion.*
2018-10-31 17:44:42 -05:00
Scott Lahteine
946cf8b453
EEPROM read code grouping
2018-10-31 16:43:46 -05:00
Ludy
f2adb4b9cc
Update German language ( #12280 )
2018-10-31 16:40:41 -05:00
Karl Andersson
484ca68228
Fix misplaced parentheses ( #12284 )
2018-10-31 15:34:37 -05:00
Scott Lahteine
1d366db764
Tweaks to CR-10S configuration
2018-10-30 23:36:32 -05:00
Scott Lahteine
b5d7f69b51
Followup to #12249
2018-10-30 22:51:45 -05:00
N95JPL
b780b69c62
Use font ascent and descent for line positioning ( #12224 )
2018-10-30 22:39:44 -05:00
Scott Lahteine
9cd3529108
Organize language data, fix Korean and Danish
2018-10-30 20:41:16 -05:00
Chris Pepper
66d44c72c3
Add fast binary file transfer to SD card option ( #12249 )
2018-10-30 19:44:12 -05:00
Marcio Teixeira
72d8adfd1e
Cleanup and refactor EXTENSIBLE_UI ( #12227 )
...
- Add `axis_t`, `extruder_t`, `heater_t`, and `fan_t` to eliminate ambiguity, improve type safety.
- Regularized getter/setter argument order and naming.
- `setAxisPosition` no longer stacks moves in the buffer, allowing it to be called repeatedly on each touch ui tap.
- Implement better manual moves for `EXTENSIBLE_UI` (#12205 )
- Calling `setAxisPosition_mm` no longer buffers the entire move to the new position, but instead causes small moves towards it to be made during the idle loop. This allows the user to adjust the destination even after the move has started and makes the UI feel much more responsive.
- As suggested by @ejtagle, the new code keeps the planner buffer full to ensure smooth motion without stops and starts.
- Change `En`, `Hn` and `FANn` to zero-based indices.
- Labels consistent with the rest of Marlin code.
2018-10-30 19:42:26 -05:00
Karl Andersson
1946f729fd
STM32 FastIO using register access ( #12276 )
2018-10-30 19:25:44 -05:00
Scott Lahteine
56057bcecd
Fix lcd_impl_status_screen_1
2018-10-30 19:24:16 -05:00
Scott Lahteine
4ed579cafc
Americanized English spelling
2018-10-30 18:55:38 -05:00
Scott Lahteine
9e663a624b
Apply #pragma once to configuration files
2018-10-30 18:35:12 -05:00
Scott Lahteine
98c32d8df1
Fix a config endif label
2018-10-30 18:28:16 -05:00
Scott Lahteine
3583e2b449
Followup to Menu Refactor ( #12275 )
2018-10-30 16:34:45 -05:00
TheLongAndOnly
5536228359
G34 Auto-align multi-stepper Z axis ( #11302 )
2018-10-29 14:01:36 -05:00
Scott Lahteine
f9b80e7217
Make getfilename_sorted standard for listings
2018-10-29 13:54:21 -05:00
Scott Lahteine
5ead026967
Fix menu_temp_xx_filament_change menu items
2018-10-28 20:43:33 -05:00
Scott Lahteine
d632e44c8c
[Merge] Refactor LCD menus / screens ( #12199 )
2018-10-28 18:18:22 -05:00
Ludy
1f9806875c
Update German language ( #12261 )
2018-10-28 18:11:55 -05:00
mholeys
63ce8baa55
Fix Teensy 3.5/3.6 ADC access for ADC1 ( #12258 )
2018-10-28 15:51:49 -05:00
Scott Lahteine
3a935fd72b
Reduce repetition in menu edit items
2018-10-28 15:46:45 -05:00
Scott Lahteine
b063b1b722
Reorganize includes and declarations
2018-10-28 15:46:45 -05:00
Scott Lahteine
43cf913048
Move SD Card Menu to its own file
2018-10-28 15:46:45 -05:00
Scott Lahteine
0161d3f733
Move Custom User Menu to its own file
2018-10-28 15:46:45 -05:00
Scott Lahteine
3b0d2330b6
Move Delta Calibrate Menu to its own file
2018-10-28 15:46:45 -05:00
Scott Lahteine
6896847210
Move LED Menu to its own file
2018-10-28 15:46:45 -05:00
Scott Lahteine
9cd5471202
Move Job Recovery Menu to its own file
2018-10-28 15:46:45 -05:00
Scott Lahteine
9f11e0284c
Move Filament Change Menu to its own file
2018-10-28 15:46:45 -05:00
Scott Lahteine
d87ab3ed20
Move Advanced Settings Menu to its own file
2018-10-28 15:46:45 -05:00
Scott Lahteine
587a64d80c
Move Bed Leveling Menu to its own file
2018-10-28 15:46:45 -05:00
Scott Lahteine
96f313fb41
Move Info Menu to its own file
2018-10-28 15:46:45 -05:00
Scott Lahteine
423ab029b2
Move Temperature Menu to its own file
2018-10-28 15:46:45 -05:00
Scott Lahteine
489017995e
Move UBL Menu to its own file
2018-10-28 15:46:45 -05:00
Scott Lahteine
a489c9fa52
Move Motion Menu to its own file
2018-10-28 15:46:45 -05:00
Scott Lahteine
3a9ad9f2b1
Move Configuration Menu to its own file
2018-10-28 15:46:45 -05:00
Scott Lahteine
143d4ec043
Move Tune Menu to its own file
2018-10-28 15:46:45 -05:00
Scott Lahteine
829effc1fe
Move Main Menu to its own file
2018-10-28 15:46:45 -05:00
Scott Lahteine
37ff663b02
Convert LIGHTWEIGHT_UI to CPP
2018-10-28 15:46:45 -05:00
Scott Lahteine
a964f098b3
Make dogm status screen a CPP
2018-10-28 15:46:45 -05:00
Scott Lahteine
8055ed24ff
Move font data to a subfolder
2018-10-28 15:46:45 -05:00
Scott Lahteine
774a6e8199
Drop TALL_FONT_CORRECTION
2018-10-28 15:46:45 -05:00
Scott Lahteine
c825c419d4
Convert DOGM / HD44780 impl to CPP files
2018-10-28 15:46:45 -05:00
Scott Lahteine
182b1405d9
LCD conditionals in configurations
2018-10-28 15:46:45 -05:00
Scott Lahteine
2bf18950ab
Refactor LCD menus
2018-10-28 15:46:45 -05:00
Scott Lahteine
ac5f2762b7
Use E_AXIS_N where possible
2018-10-28 15:46:45 -05:00
MasterPIC
6fbc87301f
'G29 H' to set a centered square probe area (linear, bilinear) ( #12242 )
2018-10-27 20:30:21 -05:00
Karl Andersson
c1e8bd6add
Remove STM32 board-specific delays ( #12243 )
...
...and replace with delays for all HAL_STM32 boards.
2018-10-27 17:26:12 -05:00
Scott Lahteine
3c9daf322a
MSG_CNG_SDCARD => MSG_CHANGE_SDCARD
2018-10-27 13:56:29 -05:00
Scott Lahteine
4b7a0a5b39
Require TMCStepper 0.2.2 or newer
...
In reference to #12175
2018-10-27 11:15:28 -05:00
Scott Lahteine
ab8425f1b5
Clean up PROBE_TRIGGERED_WHEN_STOWED_TEST ( #12232 )
2018-10-26 19:18:20 -05:00
Chris Rigter
3028a620af
Add RACK_AND_PINION_PROBE ( #12218 )
2018-10-26 18:24:24 -05:00
InsanityAutomation
ad60f0691c
Add Creality3D RAMPS pins definitions ( #12229 )
2018-10-26 16:09:04 -05:00
Scott Lahteine
5580773191
Use FastIO, sanity-check LPC SD options, apply formatting ( #12231 )
2018-10-26 15:23:02 -05:00
Scott Lahteine
d015f746cc
Fix some compile warnings ( #12220 )
2018-10-26 03:53:06 -05:00
Scott Lahteine
dacb5324e8
Fix display of Y on Graphical LCD
2018-10-26 01:43:47 -05:00
Scott Lahteine
bf9dd4f4cf
Add helpers for custom text in menu items ( #12214 )
...
For some features it can be useful to write custom text in a menu item. This commit provides helpers to make this easier.
2018-10-25 15:17:53 -05:00
Scott Lahteine
e8031b1152
Add Custom Microstepping options
2018-10-25 11:26:32 -05:00
Scott Lahteine
fbfb48cce0
Indent a block
2018-10-25 10:52:27 -05:00
Marcio Teixeira
1a00d1bdaf
Add pullup to USB interrupt line
...
- A pullup on the INT pin is required when the pin is level-active
2018-10-25 10:42:08 -05:00
TheSFReader
a07ac6312f
G0 feedrate may be fixed or variable ( #12172 )
2018-10-25 10:35:16 -05:00
Scott Lahteine
53c535a0c1
Remove trailing whitespace
2018-10-25 09:46:33 -05:00
Roman Moravčík
55dec02ca1
Allow X, Y, Z manual move when cold. ( #12209 )
2018-10-25 09:13:52 -05:00
Luc Van Daele
7243101135
z_offset fix for deltas ( #12210 )
2018-10-25 09:11:26 -05:00
Scott Lahteine
9613f00877
Fix getProgress_seconds_elapsed to return seconds
2018-10-24 18:05:15 -05:00
gjdodd
5d487ef40e
Fix null exception due to duration_t of zero ( #12207 )
2018-10-24 17:59:33 -05:00
Giuliano Zaro
a9061714f2
Update Italian language ( #12196 )
2018-10-24 16:40:48 -05:00
InsanityAutomation
aebbb2359d
Fix IDEX homing X0 wrong direction ( #12200 )
2018-10-24 16:40:06 -05:00
gjdodd
0a549fd1f2
Fix EXTENSIBLE_UI compile errors ( #12206 )
2018-10-24 16:36:11 -05:00
Roman Moravčík
a80ba8fc6e
Slovak translation update ( #12202 )
2018-10-24 16:02:38 -05:00
Roman Moravčík
e48cbff10d
Fixed redefinition warnings of MSG_HOTEND_TOO_COLD. ( #12203 )
2018-10-24 15:00:07 -05:00
Scott Lahteine
7a04eb3a8b
Fix some comment formatting
2018-10-23 22:35:44 -05:00
Scott Lahteine
2f873a119f
Revert some UBL strings
2018-10-23 15:39:59 -05:00
Ludy
a93e9e6e9b
Use preheat labels in place of PLA/ABS ( #12194 )
2018-10-23 15:38:17 -05:00
Karl Andersson
aa72884a6e
Enable use of SERIAL_PORT_2 on HAL_STM32 ( #12197 )
2018-10-23 15:24:58 -05:00
Scott Lahteine
46360f18b4
Bring thermistor_75.h up to speed
2018-10-23 14:52:16 -05:00
Scott Lahteine
e229b831fa
Customizable preheat labels
2018-10-23 00:57:50 -05:00
Scott Lahteine
a553ab82e0
Add e index to _lcd_move_distance_menu
2018-10-22 23:35:04 -05:00
Scott Lahteine
3a46212dd8
Better cold extrusion prevention in LCD menu ( #12189 )
2018-10-22 20:54:38 -05:00
Marcio Teixeira
fc31da1114
Implement custom delay/millis for EXTENSIBLE_UI ( #12188 )
2018-10-22 19:37:48 -05:00
forkoz
3a3ab3391f
Return set_directions() to stepper.cpp ( #12182 )
...
Initial manual Z move can be negative if your stepper is inverted. Leads to bad situations for crashed or initially booted printers.
2018-10-22 19:30:51 -05:00
Scott Lahteine
e5ae7a07d1
Suppress compiler warning
2018-10-21 13:44:27 -05:00
Hannes Brandstätter-Müller
6ee2af5e2d
Simplify pins_TRIGORILLA_14.h ( #12162 )
2018-10-21 03:23:20 -05:00
Roman Moravčík
d801f85963
Correct EEPROM read/write disparities. ( #12169 )
2018-10-21 02:56:31 -05:00
Scott Lahteine
8d3a92fc4a
Followup to millis_t patch
2018-10-20 23:23:58 -05:00
Ludy
44369d536a
Use millis_t where needed ( #12152 )
2018-10-20 23:21:27 -05:00
Scott Lahteine
b641571098
Replace types.h with millis_t.h
2018-10-20 23:07:12 -05:00
Scott Lahteine
eeef4e630a
Fix compile error in leds.h
2018-10-20 23:07:12 -05:00
Scott Lahteine
9969c06cb5
Fix compiler warning
2018-10-20 17:16:59 -05:00
Farkas Péter
427c80119a
Hide some menu items when busy: fix typo ( #12164 )
2018-10-20 15:55:31 -05:00
InsanityAutomation
55ac2f4c23
Fix filament runout for idex duplication modes ( #12168 )
2018-10-20 13:39:33 -05:00
Karl Andersson
b640b3b0d6
Define ST7920 delays for board ARMED ( #12161 )
2018-10-20 13:12:54 -05:00
Marcio Teixeira
2e5e689a7f
Fix kill() and ExtensibleUI ( #12160 )
...
* Fix to isPrintingFromMedia()
- isPrintingFromMedia() will now return true even if SD print is paused.
- isPrintingFromMediaPaused() allows UI to determine if the print is paused.
* Don't use _delay_us in minkill (#12145 )
- In HAL_DUE, _delay_us is simply an alias for delay, which causes the board to hang and subsequently reboot due to the watchdog timer.
* Shorten code with IFSD macro
2018-10-20 01:44:46 -05:00
Scott Lahteine
b381cad399
Clean up trailing whitespace
2018-10-19 15:27:17 -05:00
Scott Lahteine
9090065e9f
Move EXTRA_FAN_SPEED above FWRETRACT
2018-10-19 15:15:00 -05:00
Karl Andersson
4eb798dbdc
Add support for Arm'ed (STM32F4) board ( #12147 )
2018-10-19 14:50:52 -05:00
TheSFReader
1fb9b299d4
Add M524 to abort SD printing ( #12155 )
2018-10-19 14:25:07 -05:00
Scott Lahteine
d26d9d5b81
Tweak IS_SD_INSERTED
2018-10-19 14:00:36 -05:00
Scott Lahteine
c6a5c74208
Add parentheses to SD macros
2018-10-19 13:52:57 -05:00
Giuliano Zaro
aa9202260d
Fix endstop when no interrupt ( #12158 )
2018-10-19 13:45:39 -05:00
Scott Lahteine
8c02dd971b
Move disable_all_steppers to minkill
2018-10-19 13:42:04 -05:00
Scott Lahteine
3847c08f7e
Disable heaters/steppers before message
2018-10-19 13:30:46 -05:00
Marcio Teixeira
71e19baf69
Fix kill => disable_all_heaters => print_job_timer.stop ( #12146 )
...
- Remove `print_job_timer.stop()` from `disable_all_heaters`
- Call `print_job_timer.stop()` for relevant `disable_all_heaters()`.
- Split up `kill()` for watchdog interrupt safety
2018-10-18 21:20:56 -05:00
Ludy
4cc1c2627e
Update German language ( #12143 )
2018-10-18 19:17:37 -05:00
Ludy
75a0d46edf
Fix compile warning re: LCD_INFO_SCREEN_STYLE
2018-10-18 19:16:24 -05:00
Scott Lahteine
a81763c237
Pins E sanity check tweak
2018-10-18 18:48:23 -05:00
Giuliano Zaro
bc22641002
[2.0.x] Updated Italian Language ( #12148 )
2018-10-18 18:08:39 -05:00
Michael Triffon
eded90bf87
Updated Azteeg X5 Mini Wifi pins for onboard SD ( #12133 )
2018-10-18 11:52:55 -05:00
nhchiu
27a84fd021
Remove unused option in Anycubic Kossel config ( #12138 )
2018-10-18 11:47:59 -05:00
Scott Lahteine
67a3c5a16a
Alternative info screen (Prusa-style) ( #12132 )
...
* Fix Z value display
* Add HAS_PRINT_PROGRESS
* Alternative Info Screen option
* Add LCD_INFO_SCREEN_STYLE to example configs
2018-10-18 11:34:52 -05:00
Marcio Teixeira
5b7dd553d3
Fix sd_mmc_spi_mem capacity; clean up USB code ( #12134 )
...
- Fix an error in the return value of `sd_mmc_spi_read_capacity` which was causing the host OS to read beyond the last sector in the card.
- Clean up the USB flashdrive code and add better debugging.
2018-10-18 11:34:07 -05:00
Scott Lahteine
df768e7d8f
Followup to #12129
2018-10-18 11:29:49 -05:00
Chris Pepper
3c13c9e3e9
[LPC176x] Fix USEABLE_HARDWARE_PWM macro, cleanup multiple LED support ( #12129 )
2018-10-18 11:26:50 -05:00
InsanityAutomation
a768df83cb
Remove stale variable ( #12136 )
2018-10-18 11:26:14 -05:00
Hannes Brandstätter-Müller
c36773bffb
Update the Ender-4 example config ( #12131 )
...
- Enable filament change menu
- Enable bed-PID
- Enable s-curve acceleration
- Enable some menu items
- Update from Skorpi's new version
- Fix extruder steps, deactivate nozzle clean feature
2018-10-17 15:49:52 -05:00
Ludy
9c71bff5e8
Update German language ( #12115 )
2018-10-17 11:17:06 -05:00
Nils Hasenbanck
9deb23aa47
Add missing SerialUSB definition for STM32 HAL ( #12124 )
2018-10-17 11:14:10 -05:00
Nils Hasenbanck
0519ef0802
Update pins for final RemRam v1.3 board ( #12125 )
2018-10-17 11:13:38 -05:00
InsanityAutomation
3ec3872730
Single Z raise value for all tool-changing / parking ( #12090 )
...
* Universal tool-change Z lift
* Add TOOLCHANGE_ZRAISE to example configs
* Park/unpark changes to example configs
* Implement DEBUG_DXC_MODE
2018-10-17 11:11:41 -05:00
Scott Lahteine
6bdbe3299e
Fix a comment
2018-10-17 10:33:54 -05:00
Scott Lahteine
bc75eb2c64
Cleanup for HAL_spi_Due.cpp
2018-10-17 10:33:54 -05:00
AnHardt
d82bcdeea1
Make PULSE_STOP(E) conditional ( #12121 )
2018-10-17 09:52:57 -05:00
Chris Pepper
c90e26dfa6
fix normal extruder stepping ( #12118 )
2018-10-17 02:47:31 -05:00
Hannes Brandstätter-Müller
96bbda5d48
remove confusing comment ( #12120 )
2018-10-17 02:47:03 -05:00
Marcio Teixeira
f98f4ac7ea
Fix and improve EXTENSIBLE_UI ( #12117 )
...
- Add methods to access print counter data
- Clean up some inconsistent method names
- Clear lcd status after filament change
- Implement `lcd_reset_status` so it works like UltraLCD
2018-10-16 16:58:29 -05:00
Scott Lahteine
8bf596bd4c
RETRACT_ZLIFT => RETRACT_ZRAISE
2018-10-16 16:46:40 -05:00
Marcio Teixeira
056561df93
[2.0.x] Enhancements to FILAMENT_RUNOUT_SENSOR ( #12069 )
...
- Added FILAMENT_RUNOUT_DISTANCE_MM option
- Added FILAMENT_MOTION_SENSOR option
2018-10-16 07:28:52 -05:00
Scott Lahteine
cce4931342
Clean up recent contribs
2018-10-16 06:45:44 -05:00
Karl Andersson
8b5e51c9aa
STM32F4xx modifications for HAL_STM32 ( #12080 )
2018-10-16 06:42:41 -05:00
Scott Lahteine
bf0c809ff2
Update M165 comment
2018-10-16 06:10:27 -05:00
AnHardt
9ac9649183
Mixer - update descriptions ( #12108 )
2018-10-16 06:09:02 -05:00
Scott Lahteine
9bf5d4331c
Clear up some compiler warnings
2018-10-16 05:47:02 -05:00
Scott Lahteine
0139762a96
Fix a sanity check
2018-10-16 05:46:33 -05:00
Scott Lahteine
2ecb124e42
Fix trailing whitespace
2018-10-16 03:50:16 -05:00
AnHardt
f56968ba0b
New Continuous Filament Mixer ( #12098 )
2018-10-16 03:38:57 -05:00
Ludy
2d2cd628c6
Update German language ( #12094 )
2018-10-16 02:59:04 -05:00
Scott Lahteine
84b59d58fb
Clean up whitespace
2018-10-16 02:02:20 -05:00
swilkens
06e2afe8e0
[2.0.x] Reduce HOMING_FEEDRATE_XY for Ender 3 ( #12105 )
...
Homing on the Ender 3 with HOMING_FEEDRATE_XY set to 50*60 was shown (#12074 ) to cause the end-stop micro-switches to bottom out, causing the carriage for both X and Y axis to physically crash into the micro switch. Reducing the homing speed prevents the switches from bottoming out.
2018-10-16 01:51:47 -05:00
TheSFReader
af939c158a
Option for G0 to have a separate feedrate ( #12089 )
2018-10-16 01:49:51 -05:00
Christopher Pepper
e5b4bf22d4
Remove debug output from flash persistent store implementation
2018-10-14 18:43:48 +01:00
Christopher Pepper
42fb7c14b0
Update the sdcard usb sharing config and apply to Re-ARM
2018-10-14 18:43:48 +01:00
Christopher Pepper
254b68fe2c
servo update
2018-10-14 18:43:48 +01:00
Andy Shaw
870bfd08f5
usb and sdcard sharing improvements
...
* Add traceback after watchdog timeout
Add the cpability to perform a traceback following a watchdog timeout.
* Enhanced hardware SPI
Allow use of either SSP0 or SSP1.
Ensure that no data is left in I/O buffers after calls to enable sharing of SSP hardware.
* Make flash emulation of eeprom the default
Make use of flash for eeprom storage the default. This means that usage of eeprom will not cause USB drive mount/unmount operations.
* Allow sharing of SD card
SD card I/O operations from the USB stack take place in idle loop, rather than at interrupt time. Allowing sharing of the SPI bus.
New configuration options to allow usage of the SD card to be specified.
* Fix problem with hardware SPI pins
2018-10-14 18:43:48 +01:00
Christopher Pepper
5ddf52d58e
[HAL][LPC176x] Pull out framework into separate repository
...
Framework and build platform now located at https://github.com/p3p/pio-framework-arduino-lpc176x and https://github.com/p3p/pio-nxplpc-arduino-lpc176x respectively
fix mkssbase leds
move hardware serial
remove hardware/software serial
Hardware Serial extraction
HardwareSerial ISRs
fix disabled serial2 causing Serial object to link
move usb devices out to framework
separate out adc/pwm peripheral function from hal.cpp
fix includes
remove unused pwm init
move adc
HAL header update
templated filtered adc
LPC1769 platform
2018-10-14 18:43:48 +01:00
Roman Moravčík
213e94bce2
[2.0.x] Updated slovak translation ( #12059 )
2018-10-14 02:15:15 -05:00
Karl Andersson
a40458405a
Fix datasize error when FWRETRACT is disabled ( #12086 )
2018-10-14 02:14:34 -05:00
Scott Lahteine
951b25163e
Extend M217 with configurable park/raise ( #12076 )
2018-10-13 23:08:20 -05:00
Kevin Velickovic
ea13a77dcb
Fixed Z-Probes NO/NC for Anycubic Kossel ( #12083 )
2018-10-13 20:34:56 -05:00
N95JPL
ab9d5eb38d
Add Bootscreen Animation ( #12077 )
2018-10-12 22:11:20 -05:00
Scott Lahteine
26208a5c2f
Clean up some boot screens
2018-10-12 18:56:39 -05:00
Scott Lahteine
9b6be0ae0f
Fix lite status screen SD %
2018-10-12 17:02:59 -05:00
Scott Lahteine
af3bf6c956
Tweak config spacing
2018-10-12 16:09:27 -05:00
Scott Lahteine
a44ef27897
Outdent singlenozzle toolchange code
2018-10-12 15:19:03 -05:00
Scott Lahteine
d338e4d875
Fix singlenozzle toolchange cold extrusion test
2018-10-12 15:15:25 -05:00
Roxy-3D
25b980dddb
Remove erroneous Pin 12 definition
...
There is no switchable Power Supply. Don't put it on Pin 12.
(Pin 12 is actually FAN1)
2018-10-12 13:45:04 -05:00
Scott Lahteine
ddaef1a60c
Clean trailing whitespace
2018-10-11 21:40:55 -05:00
Scott Lahteine
1407afad73
Move SENSITIVE_PINS to its own file
2018-10-11 01:10:11 -05:00
Scott Lahteine
45e738876a
Add stepper MS3 support
...
Co-Authored-By: TheLongAndOnly <thelongandonly@users.noreply.github.com>
2018-10-11 01:10:11 -05:00
Giuliano Zaro
d43d4e4219
Refactor PRINTER_EVENT_LEDS, apply to M303 ( #12038 )
...
Co-Authored-By: Giuliano Zaro <gmagician@users.noreply.github.com>
2018-10-10 21:25:43 -05:00
Giuliano Zaro
d8d76cd2ba
[2.0.x] Italian language update ( #12060 )
2018-10-10 20:13:10 -05:00
Scott Lahteine
e8d2cf4fb5
EEPROM followup (tmc_stepper_current_t)
2018-10-10 17:25:45 -05:00
Scott Lahteine
50cbca4c55
Hide some menu items when busy
2018-10-10 17:18:33 -05:00
InsanityAutomation
3cb5517ddb
Make singlenozzle tool-change honor no_move ( #12056 )
...
...Set no move earlier so it applies
2018-10-10 16:49:59 -05:00
InsanityAutomation
d332fcb8fa
Fix firmware-retract compile errors ( #12061 )
2018-10-10 16:46:08 -05:00
Scott Lahteine
43940d59ed
Fix trailing spaces
2018-10-10 16:24:35 -05:00
InsanityAutomation
b2c1cd7eda
Allow cold change of active extruder ( #12055 )
...
Followup to #11994
2018-10-10 09:57:48 -05:00
Scott Lahteine
d556dc1865
Fix and improve EEPROM storage ( #12054 )
...
* Clean up Temperature PID
* Improve EEPROM read/write/validate
* Group `SINGLENOZZLE` saved settings
* Group planner saved settings
* Group filament change saved settings
* Group skew saved settings
* Group `FWRETRACT` saved settings
2018-10-10 09:45:20 -05:00
Scott Lahteine
9b5c1a5e77
Fix EEPROM checksum bug
...
Addressing #12048
2018-10-10 06:14:58 -05:00
Scott Lahteine
272d4a5167
Apply #pragma once
2018-10-10 02:57:01 -05:00
Scott Lahteine
07d33849b0
Fix unused var warning, apply ENABLED
2018-10-09 21:31:28 -05:00
Hannes Brandstätter-Müller
a3e8cb1e44
[2.0.x] Ender-4 small improvements in Configuration ( #11843 )
2018-10-09 20:58:22 -05:00
Scott Lahteine
cf5284cdf2
Add SD Firmware Update capability ( #12043 )
...
Co-Authored-By: timoxd7 <timoxd7@users.noreply.github.com>
2018-10-09 20:00:47 -05:00
Scott Lahteine
0bd54392b7
Use uint8_t in EEPROM code
2018-10-09 19:00:01 -05:00
Scott Lahteine
ce82015d5f
Fix include in G80
2018-10-09 17:24:56 -05:00
Marcio Teixeira
cef1de89d0
Fixed incorrect axis index. ( #12051 )
2018-10-09 16:59:34 -05:00
Marcio Teixeira
d6d48e63fb
Allow #defined TYPE arg to ultralcd menu macros ( #12041 )
...
Previously, it was not possible for the TYPE argument to ultralcd menu macros to itself be a #defined value. This made it difficult to create variables to set many related menu items to a common precision that could be easily changed.
2018-10-08 20:01:00 -05:00
Emilio Moretti
2ef7175b42
Update Ender-2 BED_MAXTEMP ( #12042 )
...
Also added details to the README to make sure the Ender-2 status is properly documented.
2018-10-08 19:57:44 -05:00
Scott Lahteine
5f6aabccbe
Tweak M48 spacing
2018-10-08 19:11:25 -05:00
Marcio Teixeira
ec9aa4f468
[2.0.x] Miscellaneous fixes ( #12039 )
...
* Allow override of soft SPI pins in `pins_*.h`
* Add default case to avoid compiler warning.
* Additional pin definitions for Archim 2.
* Einsy Retro has same timings as Einsy Rambo.
2018-10-08 18:14:52 -05:00
Marcio Teixeira
906a24fa81
Extensible user interface API ( #11193 )
2018-10-08 15:44:05 -05:00
InsanityAutomation
ee253991d4
Various fixups for single-nozzle filament swap ( #12036 )
2018-10-08 15:39:55 -05:00
Marcio Teixeira
8dbb305e8e
Fix "Missing separator" errors. ( #12035 )
...
- Makefiles require tabs (not spaces) before shell commands.
- Other indentation can either be space or tabs.
2018-10-08 14:28:52 -05:00
Scott Lahteine
55e810d512
Fix G80 compilation
2018-10-08 13:11:36 -05:00
Scott Lahteine
d5017e2788
Add status screen with 4 nozzles
2018-10-08 01:27:21 -05:00
Scott Lahteine
7db0113b53
Improve E_AXIS_N macro
2018-10-07 18:22:05 -05:00
Nils Hasenbanck
191df5e17d
Correct PWM_PIN behavior for STM32 HALs ( #12027 )
2018-10-07 17:08:01 -05:00
Sam Lane
f2ecf8d510
Add option to control Solenoids under PARKING_EXTRUDER ( #12028 )
2018-10-07 17:07:12 -05:00
InsanityAutomation
74cd6cb4fc
Single nozzle filament change ( #11994 )
2018-10-07 17:06:14 -05:00
Scott Lahteine
bfcf570d68
Try ISR_ALIASOF for Endstop Interrupts
2018-10-07 17:05:32 -05:00
Giuliano Zaro
c0d9058e25
Shorten an Italian menu title ( #12034 )
...
…and change a multi-use "back" menu item.
2018-10-07 16:43:48 -05:00
teemuatlut
dffb4c63dc
[2.0.x] TMC2660 followup ( #12029 )
...
* Don't react to s2g on TMC2660. False positives
* Init with sensorless probing as well
2018-10-07 15:37:44 -05:00
Scott Lahteine
d6b0fbd771
Use uint8_t for all fan speeds ( #12032 )
2018-10-07 15:34:41 -05:00
Scott Lahteine
cb7844c8d4
Save PROGMEM on serial prefixes ( #12033 )
...
With default config and `EEPROM_SETTINGS`, saves over 200 bytes of PROGMEM.
2018-10-07 15:32:15 -05:00
Scott Lahteine
07db08e39d
Fix EXTRUDER_AUTO_FAN_SPEED comment
2018-10-06 19:51:17 -05:00
Scott Lahteine
ca0e308105
Fix up some units comments
2018-10-06 19:45:50 -05:00
Scott Lahteine
65b8f3821b
Suppress temperature.h compile warning
2018-10-06 19:29:41 -05:00
teemuatlut
c447d75916
Add support for TMC2660 ( #11998 )
2018-10-06 17:18:10 -05:00
Scott Lahteine
cf0b9eb37c
no need to use destination in do_pause_e_move
2018-10-06 16:43:21 -05:00
Scott Lahteine
e8d677620c
Use NUM_SERVOS in EEPROM code
...
Fix #12015
2018-10-06 15:11:32 -05:00
Scott Lahteine
0fcdfdeed6
Followup to #12017
2018-10-06 13:23:58 -05:00
Phr3d13
acac2adfc8
Add support for MeCreator2 ( #12017 )
2018-10-06 12:26:49 -05:00
Thomas Moore
49823a4939
Fix broken jerk handling ( #12019 )
...
Fix #12004
2018-10-06 12:02:50 -05:00
Scott Lahteine
52a37913c1
Extend and apply some corrections
2018-10-06 00:27:21 -05:00
Scott Lahteine
77b9a41f1f
Add G-code extensions to example configs
2018-10-06 00:15:35 -05:00
thesfreader
e09c144674
Add CNC-like G-code options
2018-10-06 00:15:27 -05:00
Scott Lahteine
33056046a3
STM32 non-generic PWM_PIN and USEABLE_HARDWARE_PWM ( #12016 )
2018-10-06 00:14:12 -05:00
Scott Lahteine
d5141c4e03
Fix up leading/trailing whitespace
2018-10-05 18:19:59 -05:00
Marcio Teixeira
03fc4d31d0
Makefile support for 32-bit Archim board and new TMC library ( #11997 )
...
* Support new TMC library and 32-bit Archim board
- Added IS_MCU flag
- When IS_MCU flag is 1, AVR compiler will be used
- When IS_MCU flag is 0, ARM compiler will be used
- Added support for new TMC library
- Added support for a 32-bit Archim board, which could probably be used as a basis for other 32-bit boards.
2018-10-05 16:06:11 -05:00
Scott Lahteine
65b36642f8
Fix Anycubic Kossel config
2018-10-04 20:27:05 -05:00
Scott Lahteine
fc326b3dde
Add USB_FLASH_DRIVE_SUPPORT to examples
...
Co-Authored-By: marcio-ao <marcio@alephobjects.com>
2018-10-04 19:54:12 -05:00
Marcio Teixeira
2067619a26
Add USB_FLASH_DRIVE_SUPPORT
2018-10-04 19:54:12 -05:00
Giuliano Zaro
07fe8d28be
[2.0.x] Partial Italian revert ( #12008 )
...
- Use a comma for decimals just in one message has not been a good idea.
- Full comments translation
2018-10-04 14:38:54 -05:00
Scott Lahteine
517b4f4cd4
Fix lightweight UI hotends display
2018-10-04 14:37:24 -05:00
Giuliano Zaro
72a750e0eb
[2.0.x] Update Italian language ( #11996 )
2018-10-04 03:03:47 -05:00
Scott Lahteine
bb561baf9e
Tweak some config comments
2018-10-04 02:42:12 -05:00
Nils Hasenbanck
fcf6d127fd
STM32 timer simplification ( #11995 )
...
Prescalers aren't calculated for the given target frequency.
Stepper timer should run at 2 Mhz and temperature timer at 72 Khz.
2018-10-03 22:33:24 -05:00
Scott Lahteine
8daadd2c8c
Fix TMC_DEBUG undefined report_tmc_status ( #11993 )
2018-10-03 11:56:49 -05:00
Scott Lahteine
c40ea1f0fd
Update EEPROM_VERSION
...
And set EEPROM_OFFSET to 0, since the historical 100 skipped bytes are never used.
2018-10-03 11:34:34 -05:00
Scott Lahteine
1358bd9319
Make MAX_EXTRUDERS always 6
2018-10-03 11:32:19 -05:00
AnoNymous
001f26b642
Template struct simplification for serial ( #11990 )
2018-10-03 11:01:21 -05:00
Scott Lahteine
348004c34f
STM32F7 HAL using the official STM32 Arduino Core ( #11750 )
2018-10-03 03:26:07 -05:00
Scott Lahteine
3e58b3a5d4
Followup to #11943
2018-10-03 02:55:10 -05:00
teemuatlut
c3229e1b34
Migrate to a new TMC library ( #11943 )
2018-10-03 02:48:49 -05:00
brian park
2abf3d258d
Korean language translation support ( #11987 )
2018-10-03 01:53:34 -05:00
Eduardo José Tagle
d6955f25b2
Expand serial support in DUE/AVR hals exploiting the templated MarlinSerial classes ( #11988 )
2018-10-03 00:47:27 -05:00
Eduardo José Tagle
f6f2246f59
Templatized serial classes ( #11982 )
2018-10-02 22:15:30 -05:00
Scott Lahteine
ee53f7d813
Revert header reorg.
2018-10-02 22:09:41 -05:00
Scott Lahteine
d619ba2685
Tweak STM32F4 config
2018-10-02 22:03:00 -05:00
LineF
d777cef837
fixed minimum macro ( #11986 )
2018-10-02 21:35:34 -05:00
Scott Lahteine
e3f7b69105
Add PROBING_STEPPERS_OFF ( #11984 )
...
Co-Authored-By: houseofbugs <houseofbugs@gmail.com>
2018-10-02 05:13:58 -05:00
Scott Lahteine
0e5bcdf695
Make DISABLE_INACTIVE_EXTRUDER a simple switch
2018-10-02 04:57:03 -05:00
Scott Lahteine
0dedb3e139
Reorganize some core headers ( #11983 )
2018-10-02 04:25:46 -05:00
Thomas Moore
ab4549d2bc
[2.0.x] Add simultaneous retraction for mixing extruder ( #11941 )
2018-10-01 23:32:02 -05:00
Scott Lahteine
c75f5a376b
Tweak some comments
2018-10-01 18:34:14 -05:00
Scott Lahteine
f4c625d3a1
Ensure MIN/MAX overrides
2018-10-01 05:32:55 -05:00
Scott Lahteine
3019713402
Reorganize some enums
2018-10-01 05:32:55 -05:00
Scott Lahteine
606a4362b3
Reduce STM32F4 compile warnings
2018-10-01 04:41:17 -05:00
Scott Lahteine
b3154b2120
Apply MOVE_Z_WHEN_IDLE to example configurations
...
Co-Authored-By: dot-bob <gibben@gmail.com>
2018-10-01 01:41:11 -05:00
dot-bob
b0fd8f2d74
Add option to move Z on double-click when idle
2018-10-01 01:41:11 -05:00
Scott Lahteine
389376c40e
Clean up softspi.h
2018-10-01 01:29:48 -05:00
Scott Lahteine
e78bdd654d
Clean up BABYSTEP options
2018-10-01 01:29:21 -05:00
InsanityAutomation
8ae113ff36
Show zprobe_zoffset when BABYSTEP_HOTEND_Z_OFFSET is disabled ( #11973 )
2018-10-01 00:30:10 -05:00
InsanityAutomation
2e98437392
Clean up main menu ( #11972 )
2018-10-01 00:15:06 -05:00
InsanityAutomation
6d862b2916
Home before level corners, if needed ( #11976 )
...
…and add a consistent homing screen for all LCD pre-homing.
2018-10-01 00:14:28 -05:00
Scott Lahteine
11ac75edcb
Use PGM_P for PSTR pointers ( #11977 )
2018-09-30 23:44:33 -05:00
InsanityAutomation
4d5566a6b7
Add filament runout sensor menu item ( #11971 )
2018-09-30 21:33:46 -05:00
Scott Lahteine
8489673cea
Adjust some HAL formatting
2018-09-30 21:24:37 -05:00
Scott Lahteine
fb8a07660a
Followup to minmax patch
...
Co-Authored-By: Palatis <palatis@gmail.com>
2018-09-30 21:17:31 -05:00
Scott Lahteine
3c40933713
Remove trailing spaces, old comment
2018-09-30 20:47:06 -05:00
Hannes Brandstätter-Müller
a3ec805c97
Anycubic Kossel Linear+: corrected DELTA_DIAGONAL_ROD ( #11964 )
2018-09-30 05:41:26 -05:00
AnoNymous
b30ca652ae
Replace MIN# / MAX# with variadic MIN / MAX ( #11960 )
2018-09-30 04:59:14 -05:00
Scott Lahteine
e10f730478
Tweak vector_3::apply_rotation
2018-09-30 01:51:33 -05:00
Scott Lahteine
e2ab78d876
Fix SERIAL_PORT_2 sanity check
2018-09-30 00:24:10 -05:00
AnoNymous
a644d8cb93
Avoid copies in vector and matrix ( #11959 )
2018-09-29 23:04:40 -05:00
Scott Lahteine
693865a649
Fix some whitespace
2018-09-29 22:36:36 -05:00
Scott Lahteine
9903305dda
Merge pull request #9582 from tcm0116/2.0.x-sensorless_probing
...
[2.0.x] Add TMC2130 sensorless probing
2018-09-29 21:02:22 -05:00
Scott Lahteine
14df753086
Correction for block->mix_steps
...
Fix #11484
2018-09-29 19:13:17 -05:00
Alexander Amelkin
2ecfda80ac
Improve support for JTAG/SWD pins reuse ( #11963 )
...
STM32 can reuse JTAG and SWD pins separately. Add `DISABLE_DEBUG` option to disable both interfaces and retain `DISABLE_JTAG` to disable JTAG only.
2018-09-29 19:00:49 -05:00
Scott Lahteine
bb47009656
Apply sensorless changes to example configs
2018-09-29 18:54:14 -05:00
Thomas Moore
3286325044
Add TMC2130 sensorless probing
2018-09-29 18:54:14 -05:00
Scott Lahteine
7d5c336c56
Corrections for dylsexic TMC
2018-09-29 18:51:11 -05:00
Scott Lahteine
d89d8fe852
Fix Busy State in temperature.cpp
...
Fix #11954
2018-09-29 17:03:35 -05:00
Giuliano Zaro
70e7a465d8
[2.0.x] Fix compile error ( #11951 )
...
Fix compile error intruduced with M109 modification
2018-09-29 13:48:23 -05:00
Hannes Brandstätter-Müller
935b120949
Anycubic Kossel: probe closer to the edge ( #11950 )
2018-09-29 02:26:16 -05:00
Scott Lahteine
1410e79e7f
Ensure M109 handles autotemp
2018-09-29 02:12:06 -05:00
Scott Lahteine
e4389f7d23
Standard methods to wait for heating ( #11949 )
2018-09-29 01:44:47 -05:00
Scott Lahteine
bdc9889d3a
Fix a sanity check
2018-09-29 00:24:25 -05:00
Scott Lahteine
321f9140d1
Followup to #11904
2018-09-28 20:04:40 -05:00
InsanityAutomation
23114aeb81
Fix garbled M119 output. Honor NUM_RUNOUT_SENSORS ( #11948 )
2018-09-28 19:00:11 -05:00
Scott Lahteine
1667ed9d1c
Pause should use ECHOLNPGM
2018-09-28 18:15:38 -05:00
Victor Tseng
93839e2f73
Add option to enable/disable autoretract altogether ( #11904 )
2018-09-28 16:52:56 -05:00
Scott Lahteine
ad21a4f07b
Tweaks to HAL format and order
2018-09-28 15:59:50 -05:00
Scott Lahteine
b682a1961a
Tweak STM32F7 TMC2660 class
2018-09-27 21:13:15 -05:00
Scott Lahteine
a0a3b23e35
Reduce Raptor bootscreen by 144 bytes
2018-09-27 18:24:40 -05:00
InsanityAutomation
95d793456b
Add Formbot Raptor config, fix other Formbot configs ( #11926 )
2018-09-27 19:20:43 -04:00
Mitch Roote
d016b572e3
[2.0.x] Add pin configuration for Fysetc F6 ( #11932 )
2018-09-27 19:20:19 -04:00
Alexander Amelkin
84926b1d5a
HAL general support for DISABLE_JTAG option ( #11211 )
...
Some STM32-based boards may use multiplexed JTAG pins as IO. Up to now the `DISABLE_JTAG` option (defined in pins files) was only supported for AT90-based boards. This commit generalizes the code and adds support for boards based on STM32F1 and STM32F4.
2018-09-27 19:02:50 -04:00
Scott Lahteine
c575c5d5f6
Bring example configs up to date ( #11939 )
2018-09-27 18:47:26 -04:00
Scott Lahteine
6b1a4f30a8
Fix case of T-Rex 3 _Statusscreen.h
2018-09-27 17:00:55 -05:00
Scott Lahteine
ab7bfa86e2
Fix case of T-Rex-3 _Statusscreen.h
2018-09-27 17:00:55 -05:00
Scott Lahteine
241168926d
Update some configs
2018-09-27 16:42:59 -05:00
Scott Lahteine
cb6454118c
Workaround for Pronterface M29
2018-09-27 16:27:02 -05:00
Victor Tseng
eeab4141db
[2.0.x] Anycubic Trigorilla 14 pins tweak ( #11869 )
2018-09-27 16:06:21 -04:00
InsanityAutomation
cb9dc56630
Add GT2560 v3 support ( #11914 )
2018-09-27 15:13:15 -04:00
InsanityAutomation
f2e630a05e
Stow probe on probing failed ( #11936 )
...
Prevents probe from being left down should probing fail and print job continue
2018-09-27 13:26:14 -04:00
Hannes Brandstätter-Müller
0b602ae101
[2.0.x] Fix Anycubic Kossel with Probe V1, stuck LCD message after stow ( #11929 )
2018-09-27 13:23:53 -04:00
Giuliano Zaro
dc11131656
[2.0.x] fix possible race condition ( #11923 )
...
Fix some commits done in #11900
2018-09-25 13:56:57 -04:00
Scott Lahteine
d6b9327c11
Followup for Endstop Noise Threshold
...
Followup to #11912
2018-09-25 13:50:49 -04:00
Scott Lahteine
aa6e8e9325
Tweak some config comments
2018-09-25 13:42:28 -04:00
Scott Lahteine
5490a664f5
Expose: Homing Validation and Endstop Noise Threshold ( #11912 )
2018-09-24 21:59:12 -04:00
Scott Lahteine
cee34f7290
Followup for BABYSTEP_HOTEND_Z_OFFSET ( #11916 )
2018-09-24 21:46:56 -04:00
teemuatlut
884ad75cb8
Update config files
2018-09-24 17:26:18 -04:00
Giuliano Zaro
18e456d38d
[2.0.x] fix home endstop bug (DON'T MERGE, needs discussion) ( #11900 )
2018-09-24 16:56:01 -04:00
Scott Lahteine
6742026568
Followup for 6 extruders
2018-09-24 14:36:50 -04:00
Scott Lahteine
04bdff4115
Add a blank line
2018-09-24 12:49:02 -04:00
Marcio Teixeira
ccbd045f02
Fixed warning about comparing signed to unsigned ( #11909 )
2018-09-24 12:03:29 -04:00
InsanityAutomation
1104054d73
2.0 IDEX Independent z offset and other fixes ( #11862 )
...
* Add Formbot Raptor board
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
* Add a second Z probe Z offset
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
* Modify method to utilize live adjustment of hotend z offset
Should probably move config option to babystepping and rename as it may now apply to all multiextruder systems
* Move config item and catchup other code to current method
2018-09-24 09:40:48 -05:00
Scott Lahteine
217e0efd20
General option PAUSE_BEFORE_DEPLOY_STOW ( #11905 )
2018-09-24 00:43:43 -04:00
Scott Lahteine
849dea92a8
Move probe extras below probe types
2018-09-23 23:23:07 -04:00
Scott Lahteine
a2b0260f0f
Update Sublime files
2018-09-23 19:59:08 -04:00
Hannes Brandstätter-Müller
a4cdffdd69
Support for manually deployed fixed probes ( #11899 )
2018-09-23 19:59:08 -04:00
Scott Lahteine
ddcbf80f23
Followup for Z_TRIPLE_ENDSTOPS
2018-09-23 12:22:31 -04:00
Marcio Teixeira
c411e7eb0d
[2.0.x] Squelch compiler warnings seen with -Wall ( #11889 )
2018-09-23 12:00:34 -04:00
Roxy-3D
83105590a0
Better default values for Mesh Inset
2018-09-22 03:25:18 -04:00
Roxy-3D
4163c1a514
Fix end stop and Z-probe reporting logic
2018-09-22 03:25:18 -04:00
Scott Lahteine
ea9eb2fc8f
Fix servo angles in config-store
2018-09-21 15:41:36 -04:00
Roxy-3D
d3d6be8210
Add MAX7219 reverse units option ( #11860 )
2018-09-19 18:54:51 -05:00
Scott Lahteine
beab9733f8
Remove extra clauses in config-store
2018-09-19 17:06:51 -05:00
Scott Lahteine
5a74b12b45
Followup to #11769
2018-09-19 16:40:32 -05:00
InsanityAutomation
f38570ac55
Add custom user menu title ( #11769 )
2018-09-19 15:04:34 -05:00
Scott Lahteine
17494099a9
Fix parking_extruder_tool_change
...
Fix #11872
2018-09-19 03:02:07 -05:00
Scott Alfter
140caf99b8
E0_CS_PIN moved from A13 to A15 on RAMPS-FD v2.2 ( #11865 )
2018-09-18 22:24:20 -05:00
Scott Lahteine
10590c2f80
Fix some fan conditionals
2018-09-18 21:23:33 -05:00
Scott Lahteine
e4ee607fc8
Fix Dual X FRS in M600
...
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
2018-09-18 21:23:33 -05:00
Scott Lahteine
bae8f82ba8
[2.0] Fix Mixing Extruder mixing factors ( #11861 )
2018-09-18 01:10:41 -05:00
Scott Lahteine
c5e5cc5e9f
Fix some trailing whitespace, macros
2018-09-17 17:30:04 -05:00
AnHardt
54bd124665
2.0.x: Fix normalize_mix() ( #11856 )
...
Mix factors needed to be updated consistent with the recent Stepper/Planner code refactor.
2018-09-17 16:37:38 -05:00
Roxy-3D
5fbfbde532
Fix example file to pull in correct pins file
2018-09-17 10:41:30 -05:00
Roxy-3D
378f354939
IDEX Scaled Duplication is still under development
...
Take it out of the menu until it is tested and working.
2018-09-17 10:26:44 -05:00
Scott Lahteine
65045ba54b
tmc_util fix part 2
...
Followup to 115abf9
2018-09-17 05:36:17 -05:00
Scott Lahteine
09a2bee8aa
Support more filament runout sensors in M119 ( #11851 )
2018-09-17 03:27:13 -05:00
Scott Lahteine
115abf9c53
Fix syntax error in front of tmc_axes
2018-09-17 01:10:20 -05:00
Roxy-3D
0780913848
IDEX Improvements ( #11848 )
2018-09-17 01:06:22 -05:00
Scott Lahteine
39732838b4
Tweak indent of Chinese languages
2018-09-17 00:58:32 -05:00
Scott Lahteine
53bd0b55cb
Followup for 6 extruders
2018-09-16 23:57:50 -05:00
Scott Lahteine
1718eff54a
Code changes supporting up to 6 extruders
2018-09-16 22:32:53 -05:00
Scott Lahteine
f5c210d33d
Config changes supporting up to 6 extruders
2018-09-16 22:22:35 -05:00
Scott Lahteine
d948c6e867
RADDS Extension Board V3 support
2018-09-16 22:22:35 -05:00
Thomas Moore
c437bb08f1
Overhaul of the planner ( #11578 )
...
- Move FWRETRACT to the planner
- Combine leveling, skew, etc. in a single modifier method
- Have kinematic and non-kinematic moves call one planner method
2018-09-16 21:24:15 -05:00
Scott Lahteine
8323a08642
Clean up some whitespace
2018-09-16 19:44:21 -05:00
Scott Lahteine
6286afd456
Add Triple-Z options to example configs
2018-09-16 00:35:58 -05:00
Holger Müller
1a6f2b29b8
Add support for Triple-Z steppers/endstops
2018-09-16 00:35:58 -05:00
Hannes Brandstätter-Müller
bc06406d7d
Fix Anycubic Kossel config (probe crash) ( #11832 )
2018-09-15 23:27:21 -05:00
Scott Lahteine
66f83d33e6
Fix some config comments
2018-09-15 23:21:55 -05:00
Hannes Brandstätter-Müller
84ed9b5a63
Send "G33 S P1" for Delta Height Calibration ( #11831 )
2018-09-15 20:17:35 -05:00
Scott Lahteine
215eee4fe5
Use 'friend' to access set_directions
2018-09-15 20:11:10 -05:00
Cassiano Leal
ff51e7322d
Fix for Stepper::set_directions() compilation error ( #11838 )
2018-09-15 19:31:51 -05:00
Scott Lahteine
809b232fa2
Fix stepper directions after M501/M502
...
See https://github.com/MarlinFirmware/Marlin/issues/11103#issuecomment-421387611
Co-Authored-By: tcm0116 <tcm0116@users.noreply.github.com>
2018-09-14 20:00:55 -05:00
Scott Lahteine
f79a5a9dee
Tweak spacing of L6470 options
2018-09-12 23:18:11 -05:00
Hannes Brandstätter-Müller
c37d3ae97d
[2.0.x] Fix NOZZLE_PARK_FEATURE for Anycubic Kossel ( #11812 )
2018-09-12 15:37:38 -05:00
HenningJW
4fb2134f00
Fix non-sensical values for Zonestar themistor table ( #11817 )
...
Values taken from Zonestar firmware for P802QA with a Melzi board. Timestamps from the firmware package are from April 2016.
2018-09-12 15:36:04 -05:00
Scott Lahteine
b220a825a7
Fix raw_filwidth_value error
2018-09-12 04:31:55 -05:00
Scott Lahteine
1933d5d6fb
Fix SD autostart with no LCD
2018-09-12 03:49:59 -05:00
Roman Moravčík
8bce5370c7
Updated slovak translation ( #11807 )
2018-09-12 03:29:17 -05:00
Giuliano Zaro
64d629ba2a
[2.0.x] Italian language fix ( #11796 )
2018-09-12 03:28:22 -05:00
Scott Lahteine
8584d3697d
Fix servo count define conflict
...
`MAX_SERVOS` => `NUM_SERVO_PLUGS`
2018-09-11 16:20:31 -05:00
Scott Lahteine
06949ae510
Fix MSG_FILAMENT_CHANGE_HEAT_1 for small LCD
2018-09-10 23:21:37 -05:00
Scott Lahteine
d882717d98
Save some PROGMEM with constexpr ( #11798 )
...
When possible, make `active_extruder` a `constexpr` to save some PROGMEM.
2018-09-10 23:09:26 -05:00
Sam Lane
4f883d5971
[2.0.x] Extruder-Distinct Linear Advance K Factors ( #11789 )
2018-09-10 22:37:32 -05:00
Scott Lahteine
fe9f088d60
[2.0.x] Anycubic LinearPlus, Trigorilla 1.4 ( #11730 )
2018-09-10 21:25:40 -05:00
Scott Lahteine
b6aae2b322
Tweak RAMPS_FD_V1 pins
2018-09-10 15:43:03 -05:00
Scott Lahteine
7391e23332
Fix RigidBoard FAN_PIN collision
2018-09-10 05:29:00 -05:00
Scott Lahteine
53b8c3bd66
Add EXTERNAL_CLOSED_LOOP_CONTROLLER to examples
2018-09-10 03:17:17 -05:00
Sam Lane
1b6bc19427
Add external closed loop controller support
2018-09-10 03:17:17 -05:00
Marcio Teixeira
2ebfe90be9
Add custom preheat temp to filament change ( #11475 )
2018-09-10 02:51:46 -05:00
Karl Andersson
69d0ed5791
[2.0.x] Fix ambiguous function call (SERIAL_PROTOCOL_F) when using Arduino_Core_STM32 ( #11747 )
2018-09-10 02:36:06 -05:00
Scott Lahteine
d32c4efc77
Fix some trailing whitespace
2018-09-10 01:26:20 -05:00
Alexander Amelkin
bc1ba998b2
[2.0.x] Fix undefined symbol 'g29_in_progress' ( #11781 )
2018-09-09 22:06:03 -05:00
InsanityAutomation
bad225dc04
Fix mesh leveling compile errors ( #11768 )
2018-09-09 04:19:48 -05:00
Sam Lane
d783400330
Updates to STM32F7 HAL, for completeness ( #11770 )
2018-09-09 03:26:15 -05:00
Scott Lahteine
72af8e0f02
Patch extruder_advance_K edit menu
...
Fix #11776
2018-09-09 03:21:08 -05:00
Sebastianv650
7e8c073fba
Fix extruder stops extruding with LA ( #11758 )
2018-09-09 00:04:14 -05:00
Scott Lahteine
0c01099f17
hop_amount => current_hop
2018-09-08 21:20:37 -05:00
Scott Lahteine
eafd62308e
Use TMC2208Stepper v0.2.5 ( #11714 )
2018-09-08 20:41:21 -05:00
Kevin
e25d2ae4a2
[2.0.x] SWITCHING_TOOLHEAD ( #11623 )
2018-09-08 01:43:24 -05:00
Alexander Amelkin
f417408df1
[STM32F1] Fix HAL for new PlatformIO ( #11749 )
2018-09-07 18:15:32 -05:00
Roxy-3D
3d7f2c1fde
Fix directory name to be consistent ( #11745 )
2018-09-06 14:10:40 -05:00
Roxy-3D
a9c98a0e47
Create _Bootscreen.h
2018-09-06 10:24:03 -05:00
Roxy-3D
9f85d3a9cb
Create _statusscreen.h
2018-09-06 10:23:20 -05:00
Roxy-3D
e2e7b1d705
Break out support of the T-Rex 3
2018-09-06 10:20:20 -05:00
Roxy-3D
67996c2b66
Break out support for the T-Rex 3
2018-09-06 10:19:05 -05:00
Roxy-3D
9c8d9d282f
Break out support for Formbot T-Rex3 from previous versions
2018-09-06 09:49:04 -05:00
Roxy-3D
e3aac59637
Create pins_FORMBOT_TREX3.h
2018-09-06 09:46:23 -05:00
Roxy-3D
f580247581
Create pins_FORMBOT_TREX2.h
2018-09-06 09:45:29 -05:00
Roxy-3D
073857646b
seperate the T-Rex2 and T-Rex3 support
2018-09-06 09:43:43 -05:00
Roxy-3D
fe4fc2883b
Add support for Formbot T-Rex3
2018-09-06 09:41:59 -05:00
Scott Lahteine
2a61c9a939
Various fixups to configs, spacing, etc.
2018-09-06 06:44:31 -05:00
Scott Lahteine
b3efbc6e6e
Add MANUAL_E_MOVES_RELATIVE to more configs
2018-09-06 02:09:14 -05:00
Scott Lahteine
679e4602fe
Add MANUAL_E_MOVES_RELATIVE to examples
2018-09-06 02:00:25 -05:00
Marcio Teixeira
beb51c2d58
Show manual extrusion moves as relative in LCD
...
- Implements FR#11724
- Old behavior can be restored by commenting out MANUAL_E_MOVES_RELATIVE
2018-09-06 02:00:25 -05:00
Scott Lahteine
d10f29ae2e
Pass segment length in G2-G3
2018-09-06 01:43:27 -05:00
Scott Lahteine
dcfde2317f
Pass segment length in prepare_kinematic_move_to ( #11737 )
2018-09-06 01:40:22 -05:00
Roxy-3D
d5379ee9d6
Fix search for white space in enqueued commands
2018-09-05 16:57:08 -05:00
Roxy-3D
8d5bea073b
Assume one Max7219 unit if not specified
2018-09-05 14:18:13 -05:00
Roxy-3D
9651ceb36b
Correct spelling of #endif
2018-09-05 10:46:08 -05:00
Scott Lahteine
b213a89ef5
Sanity-check NOZZLE_PARK_POINT
2018-09-05 06:18:08 -05:00
Scott Lahteine
86ee74731e
Comment for RADDS + RRDFGSC
2018-09-05 05:45:17 -05:00
Kevin
ae1271b2ae
RADDS: Update Full Graphic Display Pins ( #11731 )
2018-09-05 03:51:54 -05:00
Scott Lahteine
650d4313c4
Bring some configs up to date
2018-09-05 03:49:24 -05:00
AnHardt
530a13ab6c
[2.0.x] SECURITYFIX missing max temp error when PID is used ( #11717 )
2018-09-05 01:41:45 -05:00
Scott Lahteine
12fded46c2
Correct some FR strings
...
Co-Authored-By: pipersw <pipersw@users.noreply.github.com>
2018-09-04 04:00:22 -05:00
Michael Triffon
aefc2f7cf9
Add Anet A2 and A2 Plus Configurations ( #11677 )
2018-09-03 23:38:51 -05:00
scott0122
72fdb6bab3
Fix SWITCHING_NOZZLE zdiff ( #11683 )
2018-09-03 23:24:40 -05:00
Scott Lahteine
8b837dc3ad
No need for last \n in G-code items
2018-09-03 23:23:20 -05:00
Scott Lahteine
d1ceaf5550
[2.0.x] Followup to IDEX changes ( #11707 )
2018-09-03 23:15:31 -05:00
Roxy-3D
d62f4df0b7
Disable LCD Pins used by new Max7219 hook up if in that mode
2018-09-03 09:56:25 -05:00
Roxy-3D
fa772c31bf
Provide more options for Max7219 connection on Formbot
2018-09-03 09:52:36 -05:00
Scott Lahteine
8e18e48d49
Merge pull request #11610 from Freeviv/bugfix-2.0.x
...
[2.0.x] Editable servo angles
2018-09-03 03:55:38 -05:00
Giuliano Zaro
59e76e5fdf
[2.0.x] Fix planner computation ( #11708 )
...
Fix #11697
2018-09-03 00:29:29 -05:00
Roxy-3D
509ee44611
Boot and status file should not have been added to main directory!
2018-09-02 10:25:36 -05:00
Roxy-3D
f8abe12a9c
Boot and status file should not have been added to main directory!
2018-09-02 10:25:13 -05:00
Roxy-3D
7680b64aa6
IDEX clean up ( #11690 )
2018-09-02 10:18:59 -05:00
teemuatlut
49e107cea9
Restrict SW serial to AVR ( #11696 )
2018-09-01 15:24:44 -05:00
Scott Lahteine
18f1af2dca
Fix up Teensy tests, servo sanity
2018-09-01 01:10:20 -05:00
Scott Lahteine
74a04aed55
Fix compile error with NO_LCD_MENUS
2018-08-31 19:16:04 -05:00
Scott Lahteine
509e1cf2bd
Add *_DRIVER_TYPE to remaining configs
2018-08-31 19:07:17 -05:00
Scott Lahteine
d55f44edba
Printcounter improvements ( #11689 )
2018-08-31 17:40:39 -05:00
Scott Lahteine
6a3207391f
Remove obsolete HAL_timer_restrain
2018-08-31 16:17:22 -05:00
Scott Lahteine
e3fc9aa35f
Update some config comments
2018-08-31 16:03:44 -05:00
Scott Lahteine
136860e8bb
Sanity-check SERVO pin for servo probes
2018-08-31 15:47:47 -05:00
Roman Moravčík
66de50f5f8
Updated slovak translation ( #11684 )
2018-08-31 15:37:49 -05:00
scott0122
ada85d5585
Improve HOTEND OFFSET Z display precision to 3 ( #11686 )
2018-08-31 15:15:40 -05:00
scott0122
607c1e58d9
Improve HOTEND OFFSET Z display precision to 3 ( #11685 )
2018-08-31 15:14:33 -05:00
Scott Lahteine
3e81745e81
Fix issues, make optional
2018-08-29 17:58:02 -05:00
Jan
aa80e448e2
Store servo angles in EEPROM
2018-08-29 17:58:02 -05:00
Scott Lahteine
9953213513
Add EDITABLE_SERVO_ANGLES to example configs
2018-08-29 17:57:52 -05:00
Marcio Teixeira
0966bdcbc4
Reorganized ultralcd menu (10317) ( #10360 )
...
Replaced "Prepare" and "Control" menus with "Movement", "Temperature", "Configuration" and "Advanced Settings"
2018-08-29 16:51:14 -05:00
Scott Lahteine
e40a3eef04
Support for Anet A2 Plus
2018-08-29 03:39:43 -05:00
Scott Lahteine
32e38fee74
Update Controller Fan for Y2,Z2
2018-08-29 01:49:48 -05:00
Jeonghwan Roh
59cf217e77
Fix 5 mixing steppers
2018-08-29 01:49:48 -05:00
Scott Lahteine
2a2e8c314e
Suppress emergency parser G-code errors
...
Co-Authored-By: srieche <srieche@users.noreply.github.com>
2018-08-29 01:04:55 -05:00
Ilya Bukhonin
7ecb8b4af5
[2.0.x] Teensy 3.1 and 3.2 support ( #11460 )
2018-08-27 21:49:49 -05:00
Pablo Crespo
409a0632af
[2.0.x] Add Morpheus Board support ( #11651 )
2018-08-27 21:28:03 -05:00
Marcio Teixeira
0f14977b5d
LIGHTWEIGHT_UI: Allow feedrate % to exceed 255% ( #11656 )
...
- Changed type of integer used for feedrate percentage from uint8_t to uint16_t.
2018-08-27 21:26:32 -05:00
scott0122
6dc9553aa5
Fix SWITCHING_NOZZLE compile error ( #11657 )
2018-08-27 21:25:25 -05:00
Scott Lahteine
a15e570d3b
Fix SD progress with Lite Status Screen
...
Co-Authored-By: Lê Hoàng <icy.lord.love.angel@gmail.com>
2018-08-26 17:12:05 -05:00
Scott Lahteine
66966dbd69
Tweak comments for newer multiplexer
2018-08-25 17:00:49 -05:00
Scott Lahteine
933d833ec8
Tweak some Anet A6 comments
2018-08-24 21:50:53 -05:00
Scott Lahteine
d1c9517903
Followup to hotend_offset[Z] patch
2018-08-24 21:32:00 -05:00
Scott Lahteine
e2b8fc4f17
Reduce some debug strings
2018-08-24 21:11:39 -05:00
Chris Pepper
b71c2b8651
[2.0.x] Update LPC176x tests, fix clean script ( #11617 )
2018-08-24 18:53:24 -05:00
Scott Lahteine
a317bb4991
Remove stray tab
2018-08-24 17:35:13 -05:00
Scott Lahteine
acf5ae3083
!ENABLED => DISABLED
2018-08-24 16:36:37 -05:00
Scott Lahteine
ba1919c1eb
HAL tweaks to LPC1768 main
2018-08-22 17:16:18 -05:00
Scott Lahteine
0987ed2a18
Use American English
2018-08-22 17:16:18 -05:00
Kevin
6483285bc5
HOTEND_OFFSET_Z always available ( #11603 )
2018-08-22 00:21:29 -05:00
Michael Triffon
f8c52c9c29
Azteeg X5 Mini WiFi support ( #11601 )
2018-08-21 23:58:26 -05:00
jneilliii
3671c63cde
Einsy Full Graphic LCD Fix ( #11604 )
...
Fixed issue with LCD timings for Einsy RAMBo board.
2018-08-21 23:43:52 -05:00
Colin Gilgenbach
593d5375ea
Fix G28 resetting DUAL_NOZZLE_DUPLICATION_MODE ( #11605 )
...
There's no reason for G28 to reset DUAL_NOZZLE_DUPLICATION_MODE, because it only affects the E stepper, unlike DUAL_X_CARRIAGE which affects the X steppers as well.
2018-08-21 23:42:55 -05:00
Scott Lahteine
f0dbe61692
Tweaks to motion.h reachable tests
2018-08-21 23:34:29 -05:00
Scott Lahteine
2d3317a35b
Prettify Dual X Carriage description
2018-08-21 23:34:29 -05:00
Roxy-3D
cd9868f442
Make position_is_reachable() smarter about IDEX machines`
...
On many IDEX machines the allowed travel of the X1 carraige and X2 carraige does not perfectly overlap.
This helps the issue. But more work needs to be done at the higher level. (For example the X1_MAX_POS should probably be factored into G26's mesh validation pattern.)
2018-08-21 19:12:26 -05:00
Scott Lahteine
97f6396b25
Fix RE_ARM LCD pins to avoid #undef
2018-08-21 12:47:40 -05:00
Scott Lahteine
0e25f66c09
Fix Ultimaker servo pin
...
As pointed out at https://github.com/MarlinFirmware/Marlin/issues/7981#issuecomment-407116642
2018-08-21 11:39:53 -05:00
Scott Lahteine
ad12b9b46b
Fix indentation, whitespace, spelling, formbot pins...
2018-08-21 09:47:57 -05:00
Scott Alfter
b5537dde7f
need to add E2END to pins_RAMPS_FD_V2.h ( #11564 )
2018-08-21 02:16:31 -05:00
Scott Lahteine
8f0bbdcc9b
Fix up Max7219 orientations ( #11596 )
2018-08-21 02:06:18 -05:00
jmz52
a77f8c6dd5
Implement servo support for STM32F1 ( #11580 )
...
Implement servo support for STM32F1. Original code was incomplete and depended on Servo library from stm32duino which conflicts with `module/servo.h`.
2018-08-20 21:13:51 -05:00
Dave Johnson
0456caf0ad
Consolidate shared HALs and isolate HAL compile ( #11552 )
2018-08-20 21:11:12 -05:00
jmz52
dfe18ac633
Fix compilation error for STM32F1 with U8GLIB_SSD1306 or U8GLIB_SH1106 enabled ( #11583 )
...
The `binary.h` file required by `lcd/dogm/dogm_bitmaps.h` is not present in stm32duino environment. Binary macros are defined in `bit_constants.h` in stm32duino framework.
2018-08-20 20:37:56 -05:00
Roxy-3D
b0a8ce59bd
Update Boards.h to include Formbot support
2018-08-20 16:46:27 -05:00
Roxy-3D
62ce937540
Update pins.h to include the Formbot board
2018-08-20 16:44:54 -05:00
Roxy-3D
a82be36d5d
Create pins_FORMBOT.h
2018-08-20 16:43:42 -05:00
ghent360
00d24a8219
Don't call __delay_4cycles for 0 cycle delay - takes a really long time. ( #11586 )
2018-08-18 22:50:11 -05:00
Scott Lahteine
56f1e17a25
[2.0.x] Max7219 cleanup, simplify, and extend ( #11575 )
2018-08-18 01:33:13 -05:00
jmz52
0b2d686160
Fix "SD init fail" problem for STM32F1 ( #11579 )
...
Fix "SD init fail" problem for STM32F1 caused by incorrect SS pin state and incorrect SPI mode. Issue #11225
2018-08-17 23:27:10 -05:00
Scott Lahteine
a98f21ec5e
Marlin assumes signed chars
2018-08-16 22:52:42 -05:00
Kevin
db30650731
Fix UBL/Homing ( #11566 )
2018-08-16 08:28:40 -05:00
Roxy-3D
aae4c67e5d
Max7219 Clean Up ( #11563 )
...
Some of the Rotations did not do the right thing with setting and clearing pixels.
I think it is correct now. But if not... It is much closer to being correct.
2018-08-15 21:22:28 -05:00
InsanityAutomation
9de730b2bf
Update tool_change.cpp ( #11559 )
2018-08-15 19:30:52 -05:00
InsanityAutomation
c2553f9888
2.0.x - Idex match119 ( #11556 )
...
* Update ubl_G29.cpp
* Update ultralcd.cpp
2018-08-15 13:26:11 -05:00
Roxy-3D
e9de321ac0
declare void Max7219_register_setup();
2018-08-15 10:36:51 -05:00
Scott Lahteine
952a1bc9d5
Merge pull request #11551 from thinkyhead/bf2_trinamic_fixes
...
[2.0.x] Fix TMC2208 SW serial communication
2018-08-14 19:07:08 -05:00
petrzjunior
67613bf5bd
Update Czech translations ( #11510 )
2018-08-14 18:45:16 -05:00
Scott Lahteine
bd6d032628
Update default driver configuration
...
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
2018-08-14 18:42:04 -05:00
Scott Lahteine
1561e61df7
New TMC2208 constructor
...
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
2018-08-14 18:41:51 -05:00
Nils Hasenbanck
b37bfeffeb
[2.0.x] Use the new const functions of the persistentStore api ( #11544 )
2018-08-14 18:35:36 -05:00
Chris Pepper
5573ef62c6
[2.0.x] PersistentStore update followup ( #11549 )
2018-08-14 17:54:12 -05:00
Scott Lahteine
846bd24eb9
MALYAN_LCD is ok without SD
2018-08-14 05:31:47 -05:00
Scott Lahteine
834ea7fcea
Remove 'const' from PersistentStore::capacity
2018-08-14 04:46:10 -05:00
Dave Johnson
c64199941e
Compile only selected PIO environment ( #11519 )
2018-08-14 03:28:52 -05:00
Andy Shaw
5be2559eda
Use flash memory to emulate EEPROM ( #11500 )
...
Use a sector of the LPC flash memory to emulate EEPROM storage, removing the need to have an SD card to store system parameters.
2018-08-14 01:19:34 -05:00
Scott Lahteine
6964e1a95a
Clean up trailing whitespace
2018-08-14 00:55:37 -05:00
Scott Lahteine
865ee5985f
Followup persistent store with heading, const
2018-08-13 23:55:33 -05:00
Scott Lahteine
a4b0148365
Easier to find 'static inline'
2018-08-13 23:55:33 -05:00
Scott Lahteine
cc0a60453f
Merge pull request #11526 from hasenbanck/eeprom-cleanup
...
[2.0.x] Change direct eeprom access to HAL::PersistentStore
2018-08-13 19:45:10 -05:00
Roxy-3D
65c5227c29
Change M7219 I to setup Max7219 registers, but not do initialization pattern
2018-08-13 17:46:48 -05:00
Nils Hasenbanck
577aeb4aa9
All EEPROM access uses persistentStore
2018-08-13 17:43:35 -05:00
Scott Lahteine
6a8b906318
Followup for persistent_store_api.h
2018-08-13 17:43:35 -05:00
Chris Pepper
66d2b48b59
Update PersistentStore api ( #11538 )
...
- Clean up the API to use a `static` class instance to adhere to Marlin convention
- Add `const` position data access for read/write
- Add Storage capacity to the interface
2018-08-13 17:30:25 -05:00
Roxy-3D
60f1376798
Make M7219 I more robust and nice to look at
...
Make M2719 initialize the Max7219 registers and then run the initialization pattern (if one is specified).
2018-08-13 16:59:25 -05:00
Roxy-3D
fd15b1495a
add I parameter to M42 to allow access to sensitive pins
2018-08-13 16:57:09 -05:00
Scott Lahteine
11b411a872
Improve AXIS_DRIVER_TYPE macros
2018-08-13 16:57:09 -05:00
Scott Lahteine
f1347f783d
Optimize thermistor table 71
...
agData in Table 71 is extremely oversampled (see Issue #11220 ). I have removed the data points that perform *worse* than linearly interpolating the remaining points, and fixed up two points that were simply rounded incorrectly.
Co-Authored-By: Aaron Griffith <aargri@gmail.com>
2018-08-13 02:54:55 -05:00
Scott Lahteine
0bda22367b
Allow Einsy RAMBo FAN1_PIN override
2018-08-13 02:49:30 -05:00
Scott Lahteine
1b921b246b
Fix pca9632_set_led_color
...
…when used with an I2C screen.
Co-Authored-By: soimy <soimy@163.com>
2018-08-13 02:40:22 -05:00
Scott Lahteine
aa9d329560
Reduce max accel in Creality configs
2018-08-11 22:56:51 -05:00
Scott Lahteine
c93538e9f3
UBL/planner patch tweaks
2018-08-11 22:50:45 -05:00
Scott Lahteine
0af22549a6
Allow G33 to compile with no LCD
2018-08-11 22:32:09 -05:00
Thomas Moore
fc55f1da01
Account for UBL correction when setting the planner position ( #11486 )
2018-08-10 13:00:50 -05:00
Scott Lahteine
b328fb4dc9
Treat TMC2660 like non-TMC ( #11508 )
2018-08-10 00:30:28 -05:00
Scott Lahteine
72b086b90d
Add A5984 to example configurations
2018-08-09 23:04:27 -05:00
Greg Nutt
a1a5367380
Smoothieboard V1.0/1.1 and A5984 support
2018-08-09 23:03:17 -05:00
Scott Lahteine
f891416e70
No raise on G28 after power-loss
2018-08-07 13:51:36 -05:00
Scott Lahteine
e4ecade8d4
Fix AUTO_POWER_CONTROL compile error
...
Counterpart to #11467
Co-Authored-By: lsellens <lsellens@users.noreply.github.com>
2018-08-06 23:20:51 -05:00
Giuliano
eee1b7c50c
[2.0.x] Fix compile error ( #11465 )
...
Address #11463
2018-08-06 23:14:53 -05:00
Giuliano
e85feb2545
[2.0.x] Better timing handling ( #11461 )
2018-08-06 23:13:36 -05:00
Scott Lahteine
79835590e3
Easier to disable homing validation ( #11458 )
2018-08-06 23:11:37 -05:00
Scott Lahteine
131d216afa
Fix drivers.h dependency, defer macro evaluation ( #11450 )
2018-08-03 21:49:04 -05:00
Scott Lahteine
9c62c47579
[2.0.x] Fix Dual X Carriage tool change crash ( #11447 )
2018-08-03 20:47:29 -05:00
Scott Lahteine
9bae413901
Add Bigtreetech/BIQU KFB 2.0 board ( #11446 )
2018-08-03 18:14:26 -05:00
Marcio Teixeira
f2224755ad
Fix jumping progress bar. ( #11439 )
...
- When LCD_SET_PROGRESS_MANUALLY was disabled and an SD print was not active (i.e. the printer was idle), progress_bar_percent would read uninitialized memory from stack and cause progress bar to jump wildly.
- Also updated conditions in `#ifdef` to match `ultralcd.cpp`
2018-08-03 17:17:02 -05:00
Scott Lahteine
aae02827c0
Cosmetic pins changes
2018-08-03 17:03:19 -05:00
Scott Lahteine
64c493ad82
MKS_12864_OLED code cleanup
2018-07-30 23:22:40 -05:00
Scott Lahteine
b826bf4194
Fix initial safe_speed in jerk code ( #11417 )
2018-07-30 22:50:08 -05:00
forkoz
2cc950d67e
[2.0.x] MKS SBASE Trinamic examples/support ( #11402 )
2018-07-30 22:48:58 -05:00
Roxy-3D
16432376ab
Revert "[2.0.x]Idex and bl touch fixes" ( #11407 )
...
* Revert "[2.0.x] bltouch home refinements (#11397 )"
This reverts commit 74900f7a70#11395 )"
This reverts commit 6dafb90c01
2018-07-28 23:14:46 -05:00
Giuliano
74900f7a70
[2.0.x] bltouch home refinements ( #11397 )
...
Just create a better functions call logic flow
2018-07-28 19:30:14 -05:00
silentninja1
6dafb90c01
[2.0.x]Idex and bl touch fixes ( #11395 )
...
* Fix BLTouch homing
Deploy at start, dont call generic stow function at finish or raise goes too high before setting 0
* Update tool_change.cpp
* Update motion.cpp
* Update motion.cpp
* Update motion.cpp
* Update motion.cpp
* Change brackets to be more in align of Marlin coding standards
2018-07-28 10:33:31 -05:00
Giuliano
5ce5ff8e9b
[2.0.x] fix bltouch homing ( #11379 )
...
Partially revert. Seems to solve the issue, but one report says G29 still fails.
2018-07-27 18:30:08 -05:00
Scott Lahteine
15d68cb496
Pre-override of ST7920 delays before HAL.h
2018-07-26 23:33:18 -05:00
Dave Johnson
8a24ff94d1
AT90USB1286 PIO cleanup and optimization ( #11230 )
...
-normalize `env` and `board` to lowercase naming convention.
-make board `name` follow descriptive convention.
-implement `-fsingle-precision-constant` compile optimization per https://github.com/MarlinFirmware/Marlin/pull/11178#issuecomment-401673901
-fix typo in 5DPRINT entry.
2018-07-26 05:58:28 -05:00
Lee Olivares
094e6d81a5
Add Einstart-S support ( #11219 )
...
Indeed the HAL does not need to be mucked around with to expose ATmega2560 pins not available as numbers on the MEGA board, I'll need to update the wiki with that tidbit and a reference to the pin-mapping comment in `fastio_1280.h`.
2018-07-26 05:52:22 -05:00
Scott Lahteine
244b9a8257
Better fastio 1280/2560 pin list
...
Co-Authored-By: bleughb <36889022+bleughb@users.noreply.github.com>
2018-07-26 05:23:51 -05:00
Scott Lahteine
955a7f0ae9
Improve driver.h macros ( #11371 )
2018-07-26 05:11:22 -05:00
MikeLud
aadcf08913
[2.0.x] add Calibrate Z (M915) to Prepare Menu ( #11331 )
2018-07-26 05:09:49 -05:00
Giuliano
4237c3d9f8
[2.0.x] different bltouch init ( #11135 )
2018-07-26 05:04:09 -05:00
Andy Shaw
624986d423
Ensure ADC conversion is complete before reading ( #11336 )
...
The current Marlin implementation relies on a timer interrupt to start the ADC conversion and read it. However in some circumstances the interrupt can be delayed resulting in insufficient time being available for the ADC conversion. This results in a bad reading and false temperature fluctuations. These changes make sure that the conversion is complete (by checking the ADC hardware via the HAL) before reading a value.
See: https://github.com/MarlinFirmware/Marlin/issues/11323
2018-07-26 03:59:19 -05:00
Scott Lahteine
e2aa635e70
Fix Anet A6 thermistors
...
Co-Authored-By: vitekn <vitekn@users.noreply.github.com>
2018-07-26 02:02:27 -05:00
Bo Herrmannsen
67b205fd45
Add support for board RuRAMPS4D v1.3 ( #11363 )
2018-07-25 19:32:27 -05:00
forkoz
d1c6687ecd
Update MKS sBase pins ( #11357 )
2018-07-25 19:19:09 -05:00
Scott Lahteine
048dbf6eca
Merge pull request #11275 from thinkyhead/bf2_pwm_adjustments
...
[2.0.x] Tweak some SoftPWM code
2018-07-25 19:02:28 -05:00
Scott Lahteine
e05e95cf97
Clean trailing whitespace
2018-07-25 18:49:47 -05:00
Scott Lahteine
22ebbc091f
Tweak some SoftPWM code
2018-07-25 18:09:31 -05:00
Scott Lahteine
32de09f5c5
Specify some extra CR-10S pins
2018-07-25 18:08:09 -05:00
J.C. Nelson
9c2bfa2ab3
Remove extra parameter to enqueue. ( #11364 )
2018-07-25 18:02:02 -05:00
Giuliano
bd3ec66a78
[2.0.x] typo fix ( #11365 )
...
Typo fix
2018-07-25 18:00:47 -05:00
teemuatlut
fbcdf5eaeb
Simplify stepper driver per-axis selection
2018-07-25 02:47:43 -05:00
Scott Lahteine
e5c0b490c8
Add *_DRIVER_TYPE to example configs
...
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
2018-07-25 02:47:30 -05:00
Eyal
fbdbe53290
Fix get_period_inverse(0) so it doesn't crash ( #11334 )
2018-07-25 01:58:40 -05:00
Scott Lahteine
14e2b11195
Fix spelling in configs
2018-07-24 21:03:38 -05:00
Scott Lahteine
4685c7d59f
Followup to M91x I patch
2018-07-24 18:30:28 -05:00
Roxy-3D
62fa028155
Handle dual gantry machines better
2018-07-24 15:34:53 -05:00
Roxy-3D
09485f63e9
add missing ')'
2018-07-22 10:50:41 -05:00
Roxy-3D
a35abce1ac
Fix missing ')'
2018-07-19 19:20:40 -05:00
Scott Lahteine
76d4cfb064
Tweak some Max7219 code
2018-07-19 18:49:39 -05:00
Scott Lahteine
4195757585
Merge pull request #11309 from thinkyhead/bf2_manual_probe_start_z
...
[2.0.x] Manual Z Start Height
2018-07-19 18:26:26 -05:00
Roxy-3D
03b01e2500
Folger Tech i3-2020 now defaults to 2 Max7219 units
2018-07-19 17:02:46 -05:00
Roxy-3D
db85ca93c4
Change Max7219_idle_task() to use a column instead of row if Y-Axis as 16 LED's
2018-07-19 17:01:31 -05:00
Roxy-3D
9660996cc3
Add Multi Unit Support for Max7219 to bugfix_2.0.0 ( #11285 )
...
* Add Multi Unit Support for Max7219 to bugfix_2.0.0
* Apply multi-MAX7219 to example configs
* Tweak some spacing, macros
2018-07-19 13:56:47 -05:00
Scott Lahteine
39c8aed8ba
Add MANUAL_PROBE_START_Z to example configs
2018-07-18 21:49:20 -05:00
Scott Lahteine
2106fa26b1
Add MANUAL_PROBE_START_Z for manual probing
2018-07-18 21:49:20 -05:00
Scott Lahteine
17ed0f815c
Fix tool_change call in UBL G29
...
Fix #11279 , #11252
2018-07-18 20:30:30 -05:00
Scott Lahteine
6d2aff03bd
Merge pull request #11306 from thinkyhead/bf2_power_loss_pin
...
[2.0.x] Add support for power loss detect pin
2018-07-18 20:13:20 -05:00
Scott Lahteine
63a146d424
planner.synchronize at start of tool_change
...
See https://github.com/MarlinFirmware/Marlin/issues/10949#issuecomment-398540498
2018-07-18 20:10:55 -05:00
Scott Lahteine
665ac1e4d0
Add POWER_LOSS_PIN support
2018-07-18 19:55:10 -05:00
Scott Lahteine
2243f72523
Add POWER_LOSS_PIN to example configs
2018-07-18 19:55:10 -05:00
Chris Pepper
47d5fcbbcc
[2.0.x] Change MKS SBASE default serial port to avoid confusion ( #11301 )
2018-07-18 18:43:20 -05:00
Scott Lahteine
c83109c0ae
Merge pull request #11238 from xC0000005/MalyanLCDUpdate
...
[2.0.x] Malyan LCD Feedrate + Better Temp Handling
2018-07-17 21:06:52 -05:00
Scott Lahteine
64f007580b
Fix some header comments
2018-07-17 19:50:24 -05:00
Giuliano
aed1d17a2d
Initialize default units ( #11295 )
...
When `INCH_MODE_SUPPORT` is enabled no default unit is set. This fixes it.
2018-07-17 19:37:30 -05:00
Scott Lahteine
8c40f0c6c7
Reduce TQ message code size
2018-07-17 18:18:52 -05:00
xC0000005
b04e0c0cbb
Malyan LCD feedrate, better temp handling.
2018-07-17 18:18:52 -05:00
Scott Lahteine
065e9c3d66
Add card.longest_filename method
2018-07-17 18:18:52 -05:00
Roxy-3D
71df1f7f57
Don't display M421 information for UBL at startup
...
It takes too long to display the mesh data for large mesh's at startup. We should consider ways to speed this up.
Perhaps it makes sense to display an entire row of the mesh instead of just one mesh point?
2018-07-17 17:19:52 -05:00
Scott Lahteine
be7d1dfb3c
Merge pull request #11267 from teemuatlut/bf2_lpc_spi
...
[2.0.x] LPC1768: Expand hardware SPI class
2018-07-16 21:52:18 -05:00
Giuliano
8f686aa449
[2.0.x] Fix change filament crash ( #11269 )
...
Prevent crash, on filament change, when printer is not homed
2018-07-16 21:49:29 -05:00
teemuatlut
f38c81cdde
LPC176x: Expand HW SPI class
2018-07-14 19:06:27 +03:00
teemuatlut
3b5dec4b13
Add new LPC include folder
2018-07-14 18:58:56 +03:00
Scott Lahteine
e486326910
Vellemann K8400 Y bed size is 180
...
Co-Authored-By: kaimimue <kaimimue@users.noreply.github.com>
2018-07-13 23:19:46 -05:00
Giuliano
e5ea9d200f
[2.0.x] fix kill printer ( #11260 )
...
This will fix kill message on dual printer with 0 alignment offset
2018-07-13 23:12:43 -05:00
Jamie Bainbridge
8c57cadbe7
Include stdlib in fontutils ( #11251 )
...
When `REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER` is defined and Re-ARM build is attempted, `u8g_fontutf8.cpp` includes `fontutils.h` which uses `abs()`.
However, `abs()` is defined in `stdlib.h` which is not included in `fontutils.h`, so compile fails with an error.
Include `stdlib.h` in `fontutils.h` so that `abs()` is defined before `u8g_fontutf8.cpp` needs to use it, resolving the compile error.
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
2018-07-13 00:02:38 -05:00
Scott Lahteine
bf7d0ba859
Assert that XY probe offsets are integers
2018-07-12 22:48:07 -05:00
Scott Lahteine
12854f1909
Add Z_CLEARANCE_MULTI_PROBE to example configs
...
Co-Authored-By: nightgryphon <ngryph@gmail.com>
2018-07-12 22:46:34 -05:00
Scott Lahteine
25e2ca8896
Add Z_CLEARANCE_MULTI_PROBE
...
Co-Authored-By: nightgryphon <ngryph@gmail.com>
2018-07-12 22:46:34 -05:00
Scott Lahteine
fd8a76493b
Unify M91x parameter I meaning, simplify reports ( #11249 )
2018-07-12 22:31:51 -05:00
Scott Lahteine
566d05006d
report_state > event_handler
...
Make the endstop report method track endstop changes on its own.
2018-07-11 21:08:07 -05:00
Scott Lahteine
6b521b6df2
Loosen thermistor table size limit
...
Co-Authored-By: Aaron Griffith <aargri@gmail.com>
2018-07-11 21:08:07 -05:00
Scott Lahteine
20761b88e0
Merge pull request #11212 from AlexanderAmelkin/2.0-HD44780-remove-unused-include
...
[2.0.x][HD44780] Remove unused include
2018-07-08 17:19:59 -05:00
Roxy-3D
603e136e87
Resolve issue where user can't edit UBL's mesh
2018-07-08 14:41:38 -05:00
Alexander Amelkin
ed720194d2
[2.0.x][HD44780] Remove unused include
...
The <binary.h> header is not available in STM32 toolchain
and is not used anywhere in ultralcd_common_HD44780.h.
If it is used anywhere in HD44780 support for other platforms,
it must be included in the corresponding .cpp file directly
and put under appropriate conditional compilation directives
for the platform requiring it.
As I was unable to find such code, I consider the file unused
and hence remove the inclusion.
2018-07-06 23:45:47 -05:00
Scott Lahteine
d05e832f29
Add STM32F1 support for SD-based EEPROM
2018-07-06 23:45:47 -05:00
Scott Lahteine
63f4c9bdb9
Followup to float maths patch
2018-07-06 21:34:09 -05:00
Scott Lahteine
2992112da0
Optimize delta kinematics
...
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-07-04 22:28:56 -05:00
etagle
1367df2875
Replace double with float, optimize calculation
2018-07-04 22:28:56 -05:00
Scott Lahteine
d960d448fa
Optimize calculations with LROUND
2018-07-04 22:22:28 -05:00
Scott Lahteine
68e6650df7
Remove Quake Fast Inverse SQRT (it isn't faster)
2018-07-04 22:22:10 -05:00
etagle
e7e896e7d7
More tweaks to fastio_Due.h
2018-07-04 17:57:47 -05:00
Chris Pepper
55f4744e54
[LPC176x] Endstop Interrupts Feature ( #11202 )
...
Enable the endstop interrupts feature for LPC176x boards. Although Smoothieboard chose to use non-interrupt capable pins for their endstops, and this has been copied by clones, so they can't use it.
2018-07-04 17:51:45 -05:00
Chris Pepper
5abf5bc8a7
[LPC176x] Fix Interrupt forward declarations ( #11200 )
2018-07-04 17:43:14 -05:00
Chris Pepper
cbea385ed7
[2.0.x] Fix LCD_LANGUAGE options list formatting in config ( #11198 )
...
* Fix LCD_LANGUAGE options list formatting in config
* Remove 'cn' language option from list
2018-07-04 17:42:14 -05:00
Scott Lahteine
6837252fba
Merge pull request #11196 from thinkyhead/bf2_fix_m914_sgt
...
[2.0.x] No M914 or SGT with non-sensorless axes
2018-07-04 02:34:48 -05:00
Scott Lahteine
5379c115c8
Fix Trigorilla include typo
2018-07-03 20:23:26 -05:00
Scott Lahteine
9c058091e9
No M914 or SGT set for non-sensorless axes
2018-07-03 20:09:13 -05:00
Scott Lahteine
c7ec6c68e7
Patch SCARA config to match 1.1.x
2018-07-03 20:09:13 -05:00
Scott Lahteine
480a3d3d0c
Apply sensorless homing requirements only for specified axes
2018-07-03 19:16:09 -05:00
Scott Lahteine
47ee149dfd
Merge pull request #11195 from thinkyhead/bf2_tronxy_x3a
...
[2.0.x] Tronxy X3A configurations and thermistor
2018-07-03 19:06:01 -05:00
Scott Lahteine
8c0ec81a19
Followup to #11187
2018-07-03 18:19:26 -05:00
Scott Lahteine
48c1f32b3e
Add configurations for Tronxy X3A
2018-07-03 17:56:48 -05:00
Scott Lahteine
568cfe7caa
Add thermistor 501 (100K Zonestar)
2018-07-03 17:52:06 -05:00
Scott Lahteine
1a0f4dedad
Fix and improve POWER_LOSS_RECOVERY ( #11187 )
2018-07-02 23:21:28 -05:00
Scott Lahteine
e0ab8acf19
Add "Marlin Dev Mode" option
2018-07-02 22:55:21 -05:00
Scott Lahteine
4b2af6ab48
Minor patches to POWER_LOSS_RECOVERY
2018-07-02 17:26:53 -05:00
Scott Lahteine
1ea222e6fc
Turn off DISABLE_INACTIVE_EXTRUDER with SWITCHING_NOZZLE
...
Fix #11183
2018-07-02 17:26:53 -05:00
Roman Moravčík
8299ac121d
[2.0.x] Slovak translation update ( #11175 )
2018-07-01 23:15:51 -05:00
teemuatlut
3de0c85d41
Fix RRW graphical LCD constructor macro ( #11171 )
2018-07-01 23:14:23 -05:00
TheLongAndOnly
cedc158106
[2.0.x] Board specific init macro ( #11170 )
2018-07-01 23:11:42 -05:00
Chris Pepper
5616581eb1
[LPC176x] Update fastio _GET_INPUT, _GET_OUTPUT macros ( #11168 )
2018-07-01 23:02:38 -05:00
Scott Lahteine
8a8eae8d97
Implement more fastio_Due macros ( #11165 )
2018-07-01 01:24:06 -05:00
Scott Lahteine
c51e27d11d
Do a hard kill for failed homing moves ( #11161 )
2018-06-30 21:54:07 -05:00
Scott Lahteine
90ba77ea0f
Lose the old HOMEAXIS macro
2018-06-30 18:13:13 -05:00
Scott Lahteine
2421f3a47d
Detect endstop hits in any direction
2018-06-30 17:27:37 -05:00
Scott Lahteine
f9a090b2cf
Fix Trigorilla 1.4 pins
...
See #11097
2018-06-30 13:45:55 -05:00
Scott Lahteine
8eaac0dab3
Add delta feedrate scaling ( #11153 )
2018-06-30 13:44:27 -05:00
Scott Lahteine
444725ae9a
Non-conflicting CS pins for MKS Gen L
2018-06-30 02:36:01 -05:00
J.C. Nelson
8c9f90153e
Enable Malyan LCD Support for M200 printers. ( #11051 )
2018-06-30 00:35:54 -05:00
Scott Lahteine
fc10101b06
Tweaks to fastio_Due.h
2018-06-30 00:15:50 -05:00
Scott Lahteine
05518d6add
Add newline to end of file
2018-06-29 23:54:16 -05:00
Scott Lahteine
d4fde91222
Fix serial.h including itself
2018-06-29 23:53:25 -05:00
Scott Lahteine
a431013eb7
Fix G33 compile warning
2018-06-29 23:17:51 -05:00
Scott Lahteine
bd7f5848f1
Remove JUNCTION_DEVIATION_INCLUDE_E option ( #11147 )
2018-06-29 22:42:05 -05:00
Scott Lahteine
fbf1c9b496
Fix and tweak POWER_LOSS_RECOVERY ( #11151 )
2018-06-29 22:41:02 -05:00
Colin Gilgenbach
0fff79c24b
Fixes G29_with_retry behavior ( #11045 )
...
* Fix G29 (ABL) retry behavior
2018-06-29 20:48:11 -05:00
Scott Lahteine
3349eb0020
Fix SKEW_CORRECTION compile error
2018-06-29 19:38:18 -05:00
Scott Lahteine
a264030526
Fix "G29" G29_MAX_RETRIES handling
2018-06-29 18:46:31 -05:00
Scott Lahteine
42f9921482
Ignore Z min endstop with separate Z-probe
...
To allow for the case where a Z endstop (e.g., hall effect) is higher than the probe trigger point, don't check the Z min endstop during probe moves. See #11134
2018-06-28 05:06:11 -05:00
Scott Lahteine
1b8973eb1c
Fix up microsteps conditionals
2018-06-27 23:41:32 -05:00
Scott Lahteine
aa4cd2e861
Eliminate stepper.* signed/unsigned warnings
2018-06-27 23:10:51 -05:00
Eduardo José Tagle
edb21f349a
Fix stepper/planner block handling, race conditions ( #11098 )
...
- Allow planner to alter the deceleration phase of the currently executing block.
- Remove BUSY flag, as it is NON ATOMIC to set bits in the Stepper ISR and Planner at the same time.
2018-06-27 18:11:16 -05:00
Scott Lahteine
4d3a9930c5
Match ASM comment spacing to 1.1.x
2018-06-27 17:26:48 -05:00
Scott Lahteine
053438a3aa
Poll all endstops, even when stationary ( #11123 )
2018-06-27 04:18:57 -04:00
Andy Shaw
3b3029c4bf
Make max_e_jerk an array to reduce CPU usage ( #11118 )
2018-06-26 22:38:31 -04:00
Scott Lahteine
d13f76b7da
Patch some loop macros
2018-06-26 20:30:52 -05:00
Scott Lahteine
229b26b02c
Clear LED matrix without startup test
2018-06-26 18:54:01 -05:00
Alexander Amelkin
ffdbc1f42c
STM32F1: Fix SD card persistent store API ( #11090 )
2018-06-26 14:41:23 -04:00
Giuliano
8d8f257384
[2.0.x] Fix advanced pause init values ( #11095 )
...
Fixed for cycle used to initialize default values
2018-06-26 14:37:52 -04:00
etagle
5b49fccf80
Add stepper driver DIR delay configuration option
...
...and recommended pulse width configuration for A4988
2018-06-26 13:28:04 -05:00
Scott Lahteine
d86f25ab63
Fix Serial ISR priority for LPC1768
...
Co-Authored-By: p3p <p3p@p3psoft.co.uk>
2018-06-25 12:15:41 -04:00
etagle
fb4e0b105b
Fix endstops compilation error
2018-06-25 12:10:17 -04:00
Eduardo José Tagle
48a15d1c7e
[2.0.x] Fix stepper/planner race condition and Stepper pulse timer ( #11081 )
...
* Planner: Removal of some race conditions between Stepper ISR and Planner, some of them pointed out by @AnHardt, some of my own findings
* Fixing timing on stepper pulses adding a compensation for the non-null time required to set ports.
2018-06-22 09:15:37 -05:00
Michael Triffon
7e802145cc
[2.0.x] Add CR-10 stock display support for Re-Arm (EXP3) ( #11068 )
2018-06-21 23:08:17 -05:00
Scott Lahteine
50b6204079
Fix LIN_ADVANCE max_e_jerk_factor
...
According to https://github.com/MarlinFirmware/Marlin/issues/9917#issuecomment-399204568
2018-06-21 22:02:34 -04:00
Scott Lahteine
99591dc20c
Filter endstops state at all times ( #11066 )
2018-06-21 20:14:16 -05:00
Scott Lahteine
a5c11bf578
Merge pull request #11075 from thinkyhead/bf2_value_editing
...
[2.0.x] Fix value editing (with callback)
2018-06-21 20:13:58 -05:00
Roxy-3D
1d7dd0edfd
Add the move_z_after_probing() functionality to UBL's G29 J
2018-06-21 13:26:20 -05:00
Scott Lahteine
383129728a
Edit Z fade as whole numbers
2018-06-21 11:52:29 -04:00
Scott Lahteine
1239e8eda2
Fix value editing with callback
2018-06-21 11:52:03 -04:00
Scott Lahteine
7a84b03796
Use MIN/MAX in post-conditionals
2018-06-20 03:15:19 -05:00
Scott Lahteine
a2a30ff0ac
Use Tool 0 for Dual X Axis G29
...
See https://github.com/MarlinFirmware/Marlin/issues/5597#issuecomment-397683325
2018-06-20 01:32:23 -05:00
Scott Lahteine
e366d55bc2
Don't reset stepper timeout for all g-codes
2018-06-19 21:48:28 -05:00
Scott Lahteine
7406f04029
Use MAX (not max) in stepper.h
2018-06-19 20:51:07 -05:00
Roxy-3D
7c54c4ed27
Tiny improvement to M7219
...
The registers within the Max7219 can get corrupted a number of ways. This allows the Max7219 to be reset and fully initialized.
And... it also allows the user to see the initialization pattern.
2018-06-19 14:46:30 -05:00
Giuliano
a65d15c905
[2.0.x] Fix Italian msg len ( #11058 )
...
Fix message to long for 12864 display
2018-06-18 22:04:55 -05:00
Scott Lahteine
d4795e5b8e
[2.0.x] Tweaks and additions for MAX7219 ( #11034 )
2018-06-18 22:04:03 -05:00
Scott Lahteine
e23677a7b2
Update some G-code comments
2018-06-18 16:13:01 -05:00
Chris Pepper
0312c42f9d
[2.0.x] LPC176x Serial cleanup ( #11032 )
2018-06-16 20:59:22 -05:00
Scott Lahteine
c1269c2ec1
Tweak AVR critical section defines
2018-06-16 17:42:32 -05:00
Scott Lahteine
da94e0bd27
Unsigned eeprom mesh addresses
2018-06-15 15:51:57 -05:00
Chris Pepper
f88adcbfd5
[2.0.x][LPC176x] Fix binary linking broken by pio update ( #11026 )
2018-06-15 15:32:51 -05:00
Simon Jouet
e2aeda61ed
HAL for Espressif ESP32 Wifi
2018-06-13 19:33:35 -05:00
Scott Lahteine
091f742432
Add WIFISUPPORT to example configs
2018-06-13 19:27:33 -05:00
Scott Lahteine
19d4c7c1cd
Tweak HAL header comments
2018-06-13 19:08:42 -05:00
Giuliano
cce0523a95
[2.0.x] reset bltouch on home ( #11018 )
...
Added reset bltouch instead. This ensure properly stow even when in error.
2018-06-13 14:09:13 -05:00
Scott Lahteine
4c8d6df13c
Extra insurance against endstop false positives ( #11013 )
2018-06-13 01:22:02 -05:00
Scott Lahteine
81edbfa665
Merge pull request #11004 from ejtagle/always_honor_maximum_step_rate
...
[2.0.x] Fix stepper pulse minimum period and timing calculations
2018-06-12 22:17:22 -05:00
Scott Lahteine
f3fed52348
Fix coolstep_min_speed / sensorless homing
...
Fix #8890
2018-06-12 22:12:46 -05:00
etagle
a215725df6
Fix stepper pulse timing
...
Always honor minimum period on stepper pulse generation, and fix timing calculations
Signed-off-by: etagle <ejtagle@hotmail.com>
2018-06-12 21:34:24 -05:00
Scott Lahteine
0d79128c8d
Localize stepper-specific defines
2018-06-12 21:16:54 -05:00
Scott Lahteine
a9861a780e
Tweak HAL heading
2018-06-12 19:40:17 -05:00
Scott Lahteine
cf53e502a2
No need to set input after attachInterrupt
2018-06-12 18:43:11 -05:00
Karl Andersson
e0276d2f32
Official STMicroelectronics Arduino Core STM32F4 HAL compatibility ( #11006 )
2018-06-12 18:38:00 -05:00
Scott Lahteine
4dbec774b5
HAL_*_TIMER_RATE => *_TIMER_RATE
2018-06-12 16:39:12 -05:00
Scott Lahteine
12689f2470
Merge pull request #11001 from thinkyhead/bf2_junction_deviation_fix
...
[2.0.x] Updates for junction_deviation_mm
2018-06-11 22:31:17 -05:00
Scott Lahteine
9b945c13a1
Fix STM32F1 ISR_ENABLED
2018-06-11 22:09:45 -05:00
Scott Lahteine
9d04f47d98
Improvements for junction_deviation_mm
...
- Drop `max_jerk` with `JUNCTION_DEVIATION`
- Add `max_e_jerk_factor` for use by `LIN_ADVANCE`
- Recalculate `max_e_jerk_factor` when `junction_deviation_mm` changes
- Fix LCD editing of `junction_deviation_mm`
2018-06-11 22:05:16 -05:00
