SunRed/Marlin-Artillery-M600
Archived
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
11097 commits 1 branch 0 tags 119 MiB
Commit graph

9308 commits

Author SHA1 Message Date
Bob-the-Kuhn
914bb80bde removed SDSS init 
added device & comm drivers for shared SPI LCDs

mistyped some updates in ultralcd_impl_DOGM.h

remove unwanted changes in onfiguration.h

still can't type

Update HAL_LCD_class_defines.h

include USB mass storage & misc
 2018-03-09 23:06:11 -06:00
Scott Lahteine
6d9ea7e184 Fix position_is_reachable_by_probe typo, add comment 
Fix #10029
 2018-03-09 21:12:11 -06:00
Roxy-3D
646dd5554c
prevent steppers from turning off during manual probes 2018-03-09 17:56:00 -07:00
Scott Lahteine
161ff9ff35 Fix UPDATE_ENDSTOP for CorePQ compatibility 
Fixes #9939
 2018-03-09 08:54:48 -06:00
Scott Lahteine
49ca67202f Patch configuration_store for extra serial port 
Fix #9948
 2018-03-09 07:42:27 -06:00
Scott Lahteine
cc59ac4603 Fix _tmc_say_axis string address 
Fixes #10003
 2018-03-09 06:10:11 -06:00
Scott Lahteine
16a8edc5f0 Add more delay before pulse off in Linear Advance ISR 
A capital idea from https://github.com/MarlinFirmware/Marlin/pull/9914#issuecomment-371614153
 2018-03-09 05:26:29 -06:00
Scott Lahteine
dfd5d2fe75
Have position_is_reachable_by_probe use the whole bed (#10020) 
Previously `position_is_reachable_by_probe` was limited to the area specified for `G29` mesh leveling (even if leveling was disabled). This change will properly consider the entire bed area so that `G30` and other non-leveling probing may take place.
 2018-03-09 03:37:30 -06:00
Bob-the-Kuhn
67a17446f2 Fix DUE incompatible enum type specification (#10017) 2018-03-09 02:17:57 -06:00
Bob-the-Kuhn
3c58ca181c [2.0.x] Correct step pulse width on LPC1768, DUE & Teensy35_36 (#10016) 2018-03-09 02:11:28 -06:00
Scott Lahteine
e297748b22 Apply const, safe_delay in servo.* 2018-03-08 19:31:32 -06:00
Scott Lahteine
3c2bfa5e53
Update powersupply_on in power_on/off (#10015) 
Fix #10004
 2018-03-08 18:56:47 -06:00
Scott Lahteine
42608b1925 Init old_red to 127 to ensure initial change 
Fix #10012
 2018-03-08 18:28:33 -06:00
Scott Lahteine
317673fec3 Init watchdog last in setup() 2018-03-08 17:34:50 -06:00
Scott Lahteine
8d32fd997f Wrap NORM_E_DIR/REV_E_DIR macros in do{}while(0) 2018-03-08 16:20:24 -06:00
Scott Lahteine
1913c37a91 Tweak to manual move eindex arg 2018-03-08 16:20:24 -06:00
Scott Lahteine
98d48fc731 Followup to HAL_timer_restrain 
Followup to #9985
 2018-03-07 22:18:37 -06:00
Scott Lahteine
03e3011332 Fix compile error with MAX_MESSAGE_LENGTH 
Fix #9988
 2018-03-07 21:57:01 -06:00
Bob-the-Kuhn
6b4a928145 2uS default step pulse (#9989) 2018-03-07 21:11:01 -06:00
Scott Lahteine
ca577c1638 Fix up various spacing, comments, and typos 2018-03-07 21:09:08 -06:00
Scott Lahteine
d45f19d385 Remove Unicode from var name 2018-03-07 19:08:44 -06:00
Scott Lahteine
224688cc3b Fix for unicode-ignorant gcc preprocessor 2018-03-07 18:34:07 -06:00
Chris Pepper
a1a88ebabc HAL function to ensure min stepper interrupt interval (#9985) 2018-03-07 17:53:25 -06:00
Scott Lahteine
be0e100fed Fix sd subdirectory encoder position 
Followup to 7e386c7
 2018-03-07 16:54:19 -06:00
Bob-the-Kuhn
04dedc7ed8 always completely initialize display (#9981) 2018-03-07 16:40:59 -06:00
Scott Lahteine
0149680f54 Fix compile error with char LCD 2018-03-07 16:25:37 -06:00
Scott Lahteine
9515e5aefb Fix LA_active_extruder (static) 2018-03-07 05:49:20 -06:00
Scott Lahteine
e5ec793f7e Wrap stepper indirection macros 2018-03-07 05:42:45 -06:00
Sebastianv650
5b85464791 Fix for LA (#9964) 
Missed in the original LA 1.5 PR: eISR has to use a local copy of
current_block->use_advance_lead because it might still run wenn the last
block has been set to NULL.
 2018-03-07 05:33:13 -06:00
Scott Lahteine
7e386c7e98 Fix encoder position for sddirectory 2018-03-07 05:23:03 -06:00
Scott Lahteine
1d604be671 Suspend auto-report during UBL map output 2018-03-07 02:00:19 -06:00
Scott Lahteine
eb212ae073 Add suspend_auto_report flag to suppress auto-report 2018-03-07 01:57:09 -06:00
Scott Lahteine
ffbf63e6af Add HAS_TEMP_SENSOR conditional 2018-03-07 01:53:50 -06:00
Scott Lahteine
94f5204629 Move AUTO_REPORT_SD_STATUS to SDSUPPORT block 2018-03-07 01:50:30 -06:00
Scott Lahteine
22a017a856
Rebuild SD file sort array on Stop SD Print (#9976) 
Thanks Chuck Hellebuyck.
 2018-03-07 01:42:11 -06:00
Scott Lahteine
920d92aa46
Merge pull request #9974 from thinkyhead/bf2_tmc_util_progmem 
[2.0.x] Move tmc_util.* extended_axis_codes to PROGMEM
 2018-03-07 00:16:50 -06:00
Scott Lahteine
b198b49d15 Followup to AUTO_REPORT_SD_STATUS 
Followup to #9832
 2018-03-07 00:13:42 -06:00
Scott Lahteine
2057177184 Make enums into implicit char 2018-03-06 23:39:56 -06:00
Scott Lahteine
e28e3bb532 Move extended_axis_codes to PROGMEM 2018-03-06 22:21:24 -06:00
Scott Lahteine
ca0def766e LIN_ADVANCE single stepper optimization 2018-03-06 19:26:54 -06:00
Scott Lahteine
8291ae34f2 Support duplication mode in LIN_ADVANCE 2018-03-06 19:12:23 -06:00
Scott Lahteine
b08ec22fe1
Show E0-E4 in monitor_tmc_driver output (#9969) 
Fix #9966
 2018-03-06 19:01:07 -06:00
Marcio Teixeira
fd883c909a Improvements to Lightweight ST7920 status screen. (#9952) 
- Show units on lightweight status screen.
- Fixed progress bar so it works with M73
 2018-03-06 01:49:36 -06:00
Scott Lahteine
0dd1c4458d
Put more code between pulse start and stop (#9959) 2018-03-05 23:06:57 -06:00
Scott Lahteine
f9cafc4001
Fix menu highlight glitch, tweak scrolling code (#9957) 2018-03-05 23:05:15 -06:00
Scott Lahteine
bf9fc8ac0e M851 - report only without parameters 2018-03-05 02:11:50 -06:00
Scott Lahteine
eb867817b5
Prevent filament runout false positives (#9946) 2018-03-05 01:49:30 -06:00
Scott Lahteine
36262a0479
Use static classes for job timers (#9938) 2018-03-04 21:23:43 -06:00
Scott Lahteine
930720bbbb
Fix broken reverse planner (#9943) 
From #9914 by @Sebastianv650
 2018-03-04 21:19:06 -06:00
Bob-the-Kuhn
025118da3e Init print_job_timer in setup() instead of "early" (#9937) 2018-03-04 16:23:44 -06:00
Scott Lahteine
beeed580b8
Implement digipots for MKS SBASE (#9927) 
Fix #9477
 2018-03-04 15:14:47 -06:00
Scott Lahteine
07ae23fe14 No pulse delay on last e_steps in advance isr 2018-03-04 15:06:31 -06:00
Scott Lahteine
881529a401 Fix #9904 - toDigital should show 00-99 hours 2018-03-04 04:34:39 -06:00
Scott Lahteine
ed758de80d tweak comment in stepper.cpp 2018-03-04 04:03:23 -06:00
Scott Lahteine
d1dc863962 autotemp_factor is not value_celsius_diff 
See https://github.com/MarlinFirmware/Marlin/issues/9852#issuecomment-369861822
 2018-03-03 23:27:54 -06:00
Thomas Moore
f3914a432e Clear retracted status when homing the Z axis 2018-03-03 23:18:40 -06:00
Scott Lahteine
6d7f4f84e2
Add board MKS_BASE_HEROIC (#9926) 
Followup to #9008

- Don't define micro-stepping pins for boards that lack them.
- Allow setting of 128 microsteps with `M350`.
 2018-03-03 23:14:52 -06:00
Scott Lahteine
649f375494
Fix: M112 calling kill from interrupt (#9923) 
Fix #9906
 2018-03-03 23:14:01 -06:00
Scott Lahteine
c37b3f995a Sanity-check some graphical LCD-only options 2018-03-03 20:31:59 -06:00
Scott Lahteine
a2a672449a Updated boot screen description 2018-03-03 20:04:17 -06:00
Scott Lahteine
61620cbd15 Tweak M211 2018-03-02 02:20:40 -06:00
Scott Lahteine
6e08ddce6e Correct M401 / M402 description 2018-03-01 19:10:36 -06:00
Studiodyne
23a576faf7 [2.0] Fix for FW retract (#9878) 2018-03-01 15:15:40 -06:00
Ben Lye
461c8ef834 Fix DIGITAL_PIN_TO_ANALOG_PIN macro for Atmega1284p (#9881) 2018-03-01 15:13:57 -06:00
Scott Lahteine
88b6a15b47 Update M900 verbiage 2018-03-01 15:11:31 -06:00
Ben Lye
e2df286444 Update pinsDebug.h (#9874) 
Fix display of analog input value.
 2018-03-01 04:51:36 -06:00
Scott Lahteine
91db7930dc Drop SCARA_FEEDRATE_SCALING 
The updated planner takes the length of the move, so this pre-calculation is no longer needed.
 2018-03-01 04:30:41 -06:00
Bob-the-Kuhn
c1f4112bdc [2.0.x] Add 1284 support & misc. bug fixes (#9864) 2018-03-01 03:07:39 -06:00
Scott Lahteine
118899357d
Add sanity checks to Linear Advance 1.5 (#9873) 2018-03-01 02:10:43 -06:00
Scott Lahteine
1746749361 Followup to #9868 2018-03-01 01:53:12 -06:00
Scott Lahteine
a446433c87
Fix SENSORLESS_HOMING for Core Kinematics (#9868) 2018-03-01 01:37:31 -06:00
Scott Lahteine
2d1233b86c Fix lcd_quick_feedback call for BTN_BACK 2018-02-28 20:24:11 -06:00
AnHardt
eb8b758226 Fix some mapper, charsize problems (#9866) 2018-02-28 18:57:05 -06:00
Scott Lahteine
8bffb26c23 Fix manual move position display 
Manual moves now correctly include the workspace offset.
 2018-02-28 17:33:23 -06:00
Scott Lahteine
8c03ce4d80 Fix Z safe homing sanity check for no probe 
Fix #9851
 2018-02-28 05:28:35 -06:00
Scott Lahteine
c471389afb
Add Einsy Rambo pins (#9850) 2018-02-28 04:16:12 -06:00
Zachary Hill
c22f8dd660 Get duration_t in printcounter.h for its clients (#9843) 2018-02-28 04:15:29 -06:00
Scott Lahteine
24b9c1923f ubl G29 tweaks 2018-02-28 03:40:06 -06:00
Scott Lahteine
bd0967ad87 Fix BTN_BACK 
Followup to #9835
 2018-02-28 03:26:28 -06:00
Scott Lahteine
d9a98b5814 Russian language update 
From #9849
 2018-02-28 03:07:39 -06:00
Ben Lye
461cb22069 Fix Zonestar / ADC keypad with RAMPS. (#9840) 2018-02-28 00:07:50 -06:00
Scott Lahteine
35ec67885a
Add support for BACK button (RADDS) (#9835) 2018-02-26 22:52:57 -06:00
Scott Lahteine
0bc4c216ac Patch up pinsDebug pins 2018-02-26 19:32:48 -06:00
Scott Lahteine
cd7dc49527 Fix CR-10 status screen missing commas 
Fix #9660
 2018-02-26 15:52:50 -06:00
geigerg
4817c78a65 Add files via upload (#9828) 2018-02-26 15:44:01 -06:00
TheSFReader
eb079959fb Report sd card progress [FR] #9751 (#9832) 
* SD Status auto-report feature
Feature Request #9751
 2018-02-26 15:38:27 -06:00
Scott Lahteine
7bdb98c946 Fix #9826. Solution by @gloomyandy 2018-02-26 15:02:19 -06:00
Scott Lahteine
02474a321a Fix SDSUPPORT (and indentation) 
Based on https://github.com/MarlinFirmware/Marlin/issues/8746#issuecomment-368471901 by @benlye
 2018-02-26 14:40:40 -06:00
Scott Lahteine
cfdcf91df5 Fix compile error with initTone 2018-02-26 01:49:48 -06:00
Scott Lahteine
ae1a2ff16f Pins parity with 1.1.x 2018-02-26 01:17:50 -06:00
Roxy-3D
306f44198e Prevent serial buffer overrun in Pronterface 
75ms might  be excessive...    But I know people are seeing problems with PronterFace as the client...
 2018-02-25 23:50:44 -06:00
Scott Lahteine
966d9af98a Mesh export in Bilinear + UBL M503 2018-02-25 23:25:39 -06:00
Scott Lahteine
8d5a77001e EEPROM parity with 1.1.x 2018-02-25 23:03:09 -06:00
Scott Lahteine
2228dff3ea ubl.h compile flags from 1.1.x 2018-02-25 23:03:08 -06:00
Sebastianv650
cb4cb86d80 Useless line removed (#9814) 
nextAdvanceISR is set in the next if structure in every possible
situation, so it's useless to set it once more before.
 2018-02-25 21:20:37 -06:00
Scott Lahteine
f2c0ed193d
Add tone support for Due (#9807) 2018-02-25 10:48:14 -06:00
Scott Lahteine
0557ab5780 Fix CONFIG_ECHO_START bug 
In reference to #9633
 2018-02-25 05:34:52 -06:00
Scott Lahteine
61688233c7 HAL style tweak 2018-02-25 05:00:44 -06:00
Scott Lahteine
19ba91f77a Fix lcd_custom_bootscreen compiler warning 2018-02-25 04:38:17 -06:00
Scott Lahteine
f3dbe19669 Tweaks to HAL codestyle 2018-02-25 04:38:17 -06:00
Scott Lahteine
54c65fc3cb Standardize LCD buzz defaults 2018-02-24 22:58:22 -06:00
Scott Lahteine
4953fb1c88 Standardize encoder defaults 2018-02-24 22:34:45 -06:00
Scott Lahteine
078627f805
[2.0.x] Creality Ender-4 configuration (#9803) 
* Move Creality Ender-2 configurations
* Add Creality Ender-4 configurations
 2018-02-24 22:11:11 -06:00
Scott Lahteine
5684beae90 Bring some configs up to speed 2018-02-24 21:56:27 -06:00
UtterlyD
813f9f3082 [bugfix_2.0.x] - LIN_ADVANCE V1.5 stepper.cpp (#9797) 
Removal of obsolete (i) from port of LIN_ADVANCE from V1.1.x to V2..0.x.
 2018-02-24 16:37:23 -06:00
Scott Lahteine
3f89bbeab5 Drop a conditional only used once 2018-02-24 16:35:31 -06:00
Scott Lahteine
689bc99402 Correction to acceleration 2018-02-24 11:09:36 -06:00
Roxy-3D
92c8efdc96
Change Folger Tech i3-2020 defaults 2018-02-24 10:29:24 -06:00
Scott Lahteine
2024775e07
Spanish (UTF8) Language (#9786) 
From #7314 by @MrAmericanMike
 2018-02-23 20:24:02 -06:00
Scott Lahteine
43ff15244d Fix a progress bar condition 2018-02-23 19:43:44 -06:00
Scott Lahteine
b8485528b2 Prettify LCD_PROGRESS_BAR options 2018-02-23 19:19:57 -06:00
Zachary Hill
4d588b2d6a Further fix of LCD_PROGRESS_BAR (#9783) 2018-02-23 18:53:04 -06:00
Scott Lahteine
e0227f2110 Fix *_CS_PIN for RAMPS_FD 
Fix #9778
 2018-02-23 14:29:57 -06:00
Scott Lahteine
e65a853c59 Fix LCD_PROGRESS_BAR 
Fix #9208
 2018-02-23 14:05:10 -06:00
Scott Lahteine
07d7e8aa1b
Merge pull request #9775 from thinkyhead/bf2_g28_restore_leveling 
[2.0.x] Add RESTORE_LEVELING_AFTER_G28 option
 2018-02-23 13:43:22 -06:00
Scott Lahteine
e749945317
Un-pause print on cancel (#9780) 2018-02-23 13:42:15 -06:00
Scott Lahteine
17d984eab3 Add RESTORE_LEVELING_AFTER_G28 to example configs 2018-02-23 13:38:54 -06:00
Scott Lahteine
b2cf253a13 Add RESTORE_LEVELING_AFTER_G28 option 2018-02-23 13:38:54 -06:00
Scott Lahteine
65519263f4 Fix broken LEVEL_BED_CORNERS 
Fix #8805
 2018-02-23 09:13:34 -06:00
Scott Lahteine
8f9262f3fe Fix path to _Statusscreen.h 2018-02-23 09:06:06 -06:00
Scott Lahteine
007c56f453 Fix HAL_STM32F1/endstop_interrupts.h 
In response to https://github.com/MarlinFirmware/Marlin/issues/7076#issuecomment-367556982
 2018-02-23 02:07:34 -06:00
Scott Lahteine
0542b03750 Fix bootscreen include path 
Fix #9759
 2018-02-23 01:59:35 -06:00
Scott Lahteine
2bd252b501
[2.0.x] LIN_ADVANCE v1.5 (#9712) 2018-02-23 00:53:29 -06:00
Scott Lahteine
90fa423737
Preliminary cleanup of #include structure (#9763) 2018-02-23 00:52:52 -06:00
Scott Lahteine
a6b7e721cf Slovak language update 2018-02-23 00:49:07 -06:00
Scott Lahteine
2c9775313a Fix Z position on HD44780 
Fix #9732
 2018-02-23 00:42:42 -06:00
Studiodyne
9c9cd54ef3 Add Z Fade Height edit to UBL and Tune submenus (#9738) 2018-02-23 00:29:58 -06:00
Scott Lahteine
3851ffce0f
Merge pull request #9637 from marcio-ao/pr-lite-st7920-status 
[2.0.x] Light-weight status screen for ST7920 based printers
 2018-02-22 23:55:02 -06:00
Scott Lahteine
5f8b2c2ff0 More descriptive environment error message 2018-02-22 23:34:49 -06:00
Scott Lahteine
b17982bde9
Merge pull request #9769 from teemuatlut/bf2_compile_fixes 
[2.0.x] Fix compiling with M600 and runout sensor
 2018-02-22 22:52:31 -06:00
Scott Lahteine
799e3b2b40 LPC1768 HAL formatting/comments 2018-02-22 14:36:17 -06:00
teemuatlut
5968a3e60e Add ADVANCED_PAUSE_FEATURE include 2018-02-22 20:28:46 +02:00
teemuatlut
93cc3a8492 Make used methods public 2018-02-22 20:26:14 +02:00
Marcio Teixeira
13176dfe2f Merge remote-tracking branch 'origin/pr-lite-st7920-status' into pr-lite-st7920-status 2018-02-22 08:02:31 -07:00
Scott Lahteine
424b9a83cd Slovak language update 
From @rmoravcik at #9760
 2018-02-22 03:00:47 -06:00
Scott Lahteine
e75ccfd727
Hatchbox Alpha Config with E3Dv6 (#9762) 2018-02-22 02:57:48 -06:00
Scott Lahteine
556abc0888 Add LIGHTWEIGHT_UI to example configs 2018-02-22 00:10:43 -06:00
Marcio Teixeira
532bb3aaa1 Lightweight status screen for ST7920 
- This status screen uses the ST7920 character generator to greatly
  reduce SPI traffic and MCU load when updating the status screen.

- Has been tested with the RepRapDiscount Full Graphics Smart Controller
  but should work with any LCD that uses an ST7920 or fully compatible
  controller.
 2018-02-22 00:10:43 -06:00
Scott Lahteine
59c98d6fd5
Hephestos2 heated bed kit for all (#9757) 2018-02-21 22:27:09 -06:00
Scott Lahteine
8c1a82c327
Merge pull request #9753 from ldkraemer/BF2CR-10Bootscr 
[2.0.x] Creality CR-10mini configuration
 2018-02-21 20:29:36 -06:00
Scott Lahteine
72f63a4980 Fix DOGM progress bar with LCD_SET_PROGRESS_MANUALLY 2018-02-21 19:47:04 -06:00
ldkraemer
6c3162f9c6 Add CR-10 Mini configuration 2018-02-21 19:08:42 -06:00
ldkraemer
4431f4deb8 Add CR-10S _Bootscreen.h 2018-02-21 18:55:14 -06:00
Marcio Teixeira
e7f329edb2 Added bed corners to bed icon. 
- This makes it look less like a dash (idea stolen from cjsoong).
 2018-02-21 15:31:56 -07:00
Marcio Teixeira
e84a5545e1 Removed unnecessary extended mode switch. 
- This will slightly reduce the SPI requirements for
  updating the progress bar.
 2018-02-21 15:12:11 -07:00
Scott Lahteine
343c17d5b3
Reduce Creality3D bootscreens flash usage (#9752) 2018-02-21 16:08:52 -06:00
Scott Lahteine
63bc6ade4f Fix pinsDebug compile error 2018-02-21 14:28:58 -06:00
Roxy-3D
d504bbbfa4 Fix botched check for being off the mesh... 2018-02-21 14:28:58 -06:00
Marcio Teixeira
716a22498f Changed temp type from uint8_t to int16_t 
- Also deleted old implementation files which had been renamed.
 2018-02-21 10:15:55 -07:00
Scott Lahteine
7d8c6b3f3c
Add 20x4 option for Sainsmart LCD (#9740) 2018-02-21 00:46:25 -06:00
Scott Lahteine
1d7f5be0ff quick_home_xy sensorless homing 2018-02-20 20:52:48 -06:00
Scott Lahteine
eb182c08af
Merge pull request #9733 from thinkyhead/bf2_random_fixup_branch 
[2.0.x] Drop HAL_timer_set_count
 2018-02-20 17:03:18 -06:00
Kevin
03b48df7bb RADDS: Add EEPROM Size (#9737) 
needed for UBL
 2018-02-20 16:24:29 -06:00
Scott Lahteine
9f0907d40c Fix big edit font width calculation 
Fix #9685
 2018-02-20 16:24:23 -06:00
Marcio Teixeira
9d5968e8ec Fixed dual-extruder in Lightweight UI. 
- Moved bed icon down when the machine is configured with two nozzles.
 2018-02-20 13:34:34 -07:00
Scott Lahteine
4303f2e377 Fix MALYAN_LCD message bugs 
Fix #9711
Replacing #9731
 2018-02-20 05:40:19 -06:00
Scott Lahteine
12c5fdfdb5 Fix CYCLES_PER_MICROSECOND conflict on STM32F1 2018-02-20 03:10:39 -06:00
Scott Lahteine
a810e585db Drop HAL_timer_set_count 2018-02-20 03:10:39 -06:00
Bob-the-Kuhn
a823b801b8
Merge pull request #9729 from Bob-the-Kuhn/U8G-compile-error-2.0.x 
[2.0.x] Move #include <U8glib.h> in ultralcd_st7920_u8glib_rrd_AVR.cpp (fix bug introduced in PR #9624)
 2018-02-19 18:36:23 -06:00
Bob-the-Kuhn
47d529aac5 move #include <U8glib.h> 2018-02-19 17:39:40 -06:00
Marcio Teixeira
aada1e698f Removed unused configuration options. 2018-02-19 16:14:33 -07:00
Marcio Teixeira
c7513eb032 Merge branch 'pr-lite-st7920-status' of github.com:marcio-ao/Marlin into pr-lite-st7920-status 2018-02-19 15:38:13 -07:00
Scott Lahteine
73cd34b121 Finish AUTO_POWER_CONTROL implementation 
Followup to #9503
 2018-02-19 16:12:04 -06:00
Scott Lahteine
fc460fff94 Extend menu items for SWITCHING_EXTRUDER 
Reference #5367
 2018-02-19 11:12:42 -06:00
Scott Lahteine
c4ec01d59b Conditionals for SWITCHING_EXTRUDER 
In reference to #5367. SWITCHING_EXTRUDER was not fully implemented for EXTRUDERS > 2.
 2018-02-19 10:59:47 -06:00
Scott Lahteine
d4e4fe40e0 Add SENSORLESS_HOMING delay to quick_home_xy 
Fix #9471
 2018-02-19 10:12:16 -06:00
Scott Lahteine
25e3e62354 Null-terminate lcd_status_message 2018-02-19 10:12:16 -06:00
Scott Lahteine
a11fcd46a2
Merge pull request #9699 from Studiodyne/Studiodyne-filamentMulti 
[2.0.x] Support multiple filament runout sensors
 2018-02-19 08:42:39 -06:00
Scott Lahteine
b3deadd898 Don't raise FIX_MOUNTED_PROBE on stow 
Reference #9336
 2018-02-19 08:36:43 -06:00
Scott Lahteine
a74cece6d0 CR-10 Bootscreen 
From @plainpylut in #9660
 2018-02-19 08:07:08 -06:00
Scott Lahteine
8733d5a296 Add NUM_RUNOUT_SENSORS to example configs 2018-02-19 07:02:50 -06:00
Studiodyne
d3ca82d8c2 Support for multiple filament runout sensors 2018-02-19 07:02:50 -06:00
Scott Lahteine
0106c3e476 Style tweak in MarlinSerialUSB_Due.h 2018-02-19 06:58:26 -06:00
Scott Lahteine
3d1692d1fd Fix X2 enable with X_DUAL_STEPPER_DRIVERS 
From #9286
 2018-02-18 22:50:47 -06:00
Scott Lahteine
c241da32e8 stepper.h parity with 1.1.x 2018-02-18 22:50:38 -06:00
Scott Lahteine
3af988a7f3 Add sensorless homing delay to home_z_safely 
Based on #9705
 2018-02-18 19:28:40 -06:00
Scott Lahteine
ca55f2927a
Pulldown pin mode support (#9701) 
Implemented for LPC1768.
 2018-02-18 19:26:23 -06:00
Scott Lahteine
aef9e036bf More overridable FIL_RUNOUT_PIN 2018-02-18 04:43:15 -06:00
Scott Lahteine
79272f98fc Proposed changes to ST7920 lightweight status screen 2018-02-18 02:47:31 -06:00
Marcio Teixeira
24eb275b99 Added a light-weight status screen for the ST7920 
- The status screen uses the ST7920 character generator to greatly
  reduce SPI traffic and MCU load when updating the status screen.

- Has been tested with the RepRapDiscount Full Graphics Smart Controller
  but should work with any LCD that uses an ST7920 or fully compatible
  controller.
 2018-02-18 02:29:45 -06:00
Scott Lahteine
a6563df705
Sync pinsDebug_list.h between 1.1.x and 2.0.x (#9693) 2018-02-18 02:25:32 -06:00
Scott Lahteine
bab0e975c8
The ENDER can use BOARD_MELZI_CREALITY (#9692) 2018-02-18 02:24:39 -06:00
Scott Lahteine
83d7e95de0
Add MSG_THERMAL_RUNAWAY_BED (#9691) 2018-02-18 02:23:55 -06:00
Scott Lahteine
8ffa0b24a4 Strip excess G28 debug logging 2018-02-18 01:11:41 -06:00
Kevin
9019ea0fce Option to force X or Y to home first when homing the other axis 2018-02-18 01:11:41 -06:00
Scott Lahteine
60fc372211 Add CODEPENDENT_XY_HOMING to example configs 2018-02-18 00:46:04 -06:00
Scott Lahteine
da7c51d820 Space out some pins lines 2018-02-17 22:53:58 -06:00
Bob-the-Kuhn
e05673a379 [2.0.x] VIKI2 & RE_ARM changes (#9686) 
* VIKI2 & RE_ARM changes

1. Remove `DISABLED(SDSUPPORT)` from ST7565 in `ultralcd_impl_DOGM.h`. These LCDs share pins with the SD card and can run at the SD card rates.

2. Add SDSS definition to `pins_RAMPS_RE_ARM.h`.  Apparently the SDSS definition in `pins.h` is being processed before the one in `spi_pins.h` which resulted in not being able to read the SD card.
 2018-02-17 16:41:36 -06:00
Scott Lahteine
7a381366aa
Merge pull request #9208 from benlye/benlye-m73 
[2.0.x] Allow M73 without SDSUPPORT
 2018-02-17 15:50:11 -06:00
Scott Lahteine
7d093edc18 Add Tronxy XY100 configuration 
Based on #9674
 2018-02-17 15:48:32 -06:00
Scott Lahteine
472229b974 Fix #9681 2018-02-17 08:28:12 -06:00
Scott Lahteine
f6cc89ec7c LCD_PROGRESS_BAR w/out SDSUPPORT for character LCD 2018-02-17 08:17:22 -06:00
blye
330437ad7c Update LCD_SET_PROGRESS_MANUALLY in configs 2018-02-17 08:12:10 -06:00
blye
168af8bacb Allow LCD_SET_PROGRESS_MANUALLY without SDSUPPORT 2018-02-17 07:54:24 -06:00
Scott Lahteine
bf5df306e1 Fix compile error with SHOW_BOOTSCREEN disabled 
Fix #9530
Fix #9524
 2018-02-17 00:52:08 -06:00
Scott Lahteine
3021058e6d Fix non-UTF8 Czech language 2018-02-16 22:23:29 -06:00
Scott Lahteine
bd54ce830a Include utility.h in neopixel.cpp 2018-02-16 22:19:34 -06:00
Scott Lahteine
ff90cb409e No space for E2 with ReARM+RAMPS 
Addressing #9474
 2018-02-16 21:37:26 -06:00
Scott Lahteine
d7f82c8ddf Drop extra avr/pgmspace include in _Bootscreen.h 
Addressing #9441
 2018-02-16 18:36:35 -06:00
Scott Lahteine
1bf2b1e475 Use serial macro in sd_mmc_spi_mem.cpp for Due 2018-02-16 17:57:24 -06:00
Scott Lahteine
241e55ef3b Apply SERIAL_FLUSH macro 2018-02-16 17:32:12 -06:00
Scott Lahteine
1f8f8c9104
Merge pull request #9657 from petrzjunior/bugfix-2.0.x 
[2.0.x][Language] Update Czech (Advanced pause...)
 2018-02-16 02:54:06 -06:00
Thomas Moore
cff62042ee Fix LCD manual movement on kinematic machines (#9655) 2018-02-16 02:34:36 -06:00
teemuatlut
749bc42aa9 TMC SGT is int8 (#9651) 2018-02-16 02:19:33 -06:00
Bob-the-Kuhn
2d749d490b Fix / complete USE_CONTROLLER_FAN (#9666) 2018-02-16 02:18:50 -06:00
Scott Lahteine
08d685c97a Followup to 21e60fd 2018-02-16 02:09:17 -06:00
Scott Lahteine
c49844df66 !ENABLED => DISABLED 2018-02-16 01:51:34 -06:00
Scott Lahteine
304e0f8945 Followup to 21e60fd 
`ENABLED` only works for flag-type options. Floats must use `#ifdef`.
 2018-02-15 22:24:23 -06:00
Scott Lahteine
6a70a4fbb3
Fix G26 circles (#9627) 
Easier to configure. Catch an odd divisor.
 2018-02-15 22:11:26 -06:00
Bob-the-Kuhn
349dafa728 config update (set to -1) 2018-02-15 21:42:54 -06:00
Roxy-3D
21e60fd3ed
Allow user to control Z-Height correction for off mesh movements (#9661) 2018-02-15 15:07:42 -06:00
Petr Zahradník
5d9e16ea49 Update Czech advanced pause 2018-02-15 20:22:22 +01:00
Roxy-3D
c78e1c0f23
Fix G26 Circles... (#9641) 
* Fix G26 Circles...
 2018-02-15 11:15:15 -06:00
Bob-the-Kuhn
b648999528
Merge pull request #9624 from Bob-the-Kuhn/RRD-8-bit-code-to-2.0.x 
[2.0.x] Add delays to AVR driver for RRD Full Graphic Smart Controller
 2018-02-14 22:43:17 -06:00
Marcio Teixeira
8db67d1647 Fixed compilation when using avr-gcc 
- avr-gcc is more strict than the Arduino IDE, it seems.
 2018-02-14 15:51:25 -07:00
Marcio Teixeira
f05bd7f082 Added files missing from earlier commit. 2018-02-14 14:51:35 -07:00
Marcio Teixeira
4880ac6533 Added a light-weight status screen for the ST7920 
- The status screen uses the ST7920 character generator to greatly
  reduce SPI traffic and MCU load when updating the status screen.

- Has been tested with the RepRapDiscount Full Graphics Smart Controller
  but should work with any LCD that uses an ST7920 or fully compatible
  controller.
 2018-02-14 14:43:54 -07:00
Roxy-3D
3d74ff3c87
Cartesian UBL systems should not use SEGMENT_LEVELED_MOVES 
There is significant downside to breaking up the long line segments on UBL Cartesian machines.   It adds a lot of extra computation but worse...  It cuts out all of UBL's off mesh Z-Height correction checks.    There have been a large number of people complaining about the nozzle going to infinity or crashing into the bed lately.   They are being caused by
```
void unified_bed_leveling::line_to_destination_cartesian()
```
not watching over the segments being queued up for movement.
 2018-02-14 14:16:12 -06:00
Scott Lahteine
5dc04c5201 Fix #9361 2018-02-14 07:48:20 -06:00
AnHardt
133b38b93b Complete M48 description (#9631) 2018-02-14 05:17:58 -06:00
Scott Lahteine
93c0198b2d Init LCD welcome message programmatically 2018-02-14 05:09:44 -06:00
Scott Lahteine
67a4cc610b French update 
Based on #9610
 2018-02-14 04:15:47 -06:00
Scott Lahteine
e7b50c89b0 Fix #9201 
FILAMENT_LCD_DISPLAY can work with SDSUPPORT
 2018-02-14 03:29:47 -06:00
Scott Lahteine
8d71ad37cb flush comment to match 1.1.x 2018-02-14 02:56:18 -06:00
Scott Lahteine
272f132b82 Remove stray ` from STM32F1 HAL 
As noted in #8585
 2018-02-14 01:06:37 -06:00
Scott Lahteine
5b70d3da1c Update DIGIPOT_I2C_MOTOR_CURRENTS comments 2018-02-13 22:54:12 -06:00
Scott Lahteine
2ec65051fd Fix serial comment sp. 2018-02-13 22:40:56 -06:00
Bob-the-Kuhn
9a423e9a89 tested 2018-02-13 21:59:18 -06:00
Scott Lahteine
d741bcf8a9 Tweak boards spacing 2018-02-13 03:49:28 -06:00
Scott Lahteine
f8912bb19f French update 
Based on #9590 by @studiodyne
 2018-02-12 01:07:47 -06:00
Scott Lahteine
e6b8207b03 Restore welcome message 2018-02-12 01:02:30 -06:00
Scott Lahteine
89165326b4 Cleanup after vim and vigor 2018-02-11 06:07:30 -06:00
Scott Lahteine
423bf9955e Set Megatronics baud rate to 115200 
Fix #9092
 2018-02-11 03:43:36 -06:00
Scott Lahteine
377108619b Fix plan_arc clockwise (G2) 
Fix #9482
 2018-02-11 03:34:25 -06:00
Scott Lahteine
378867d894 Update PB Rev.F pins 2018-02-11 01:45:37 -06:00
Scott Lahteine
8e0c107545
Have Kossel Pro use Z_MIN_PROBE_ENDSTOP (#9586) 2018-02-11 01:41:40 -06:00
Scott Lahteine
03d790451f
[2.0.x] HAL timer set/get count => set/get compare (#9581) 
To reduce confusion over the current timer count vs. the compare (aka "top") value. Caution: this re-uses the function name, changing its meaning.
 2018-02-10 20:42:00 -06:00
Scott Lahteine
7a4029d1b1 Correct MOTHERBOARD for Geeetech i3 Pro X 2018-02-10 20:29:29 -06:00
Scott Lahteine
451fb16f9b Fix CYCLES_PER_MICROSECOND conflict 2018-02-10 20:08:48 -06:00
Scott Lahteine
3e384b60ce
Malyan M200 fix E0_AUTO_FAN_PIN (#9580) 
Fixes #8794
 2018-02-10 20:04:09 -06:00
Scott Lahteine
33752de12d Update some outdated configs 2018-02-10 19:48:16 -06:00
Scott Lahteine
38c7d53bf7 Repair some spacing 2018-02-10 19:33:26 -06:00
Scott Lahteine
e3043d7ac7 Fix #8744 2018-02-10 16:54:42 -06:00
Scott Lahteine
d3ddd5ffaa
Merge pull request #9576 from thinkyhead/bf2_more_tests 
[2.0.x] Fix Power class
 2018-02-10 16:43:55 -06:00
Scott Lahteine
7280fa1e31 Patch Power class 2018-02-10 15:41:18 -06:00
Scott Lahteine
4aff6c1c32 Tronxy X5S pins and configuration 2018-02-10 15:07:04 -06:00
Scott Lahteine
05aa75cecf Melzi boards use melzi pins 2018-02-10 14:44:14 -06:00
gege2b
5785bbb491 Updated french translation (#9556) 2018-02-10 14:15:41 -06:00
GMagician
299606e4ae [2.0.x] Memory overflow protection (#9562) 2018-02-10 14:14:34 -06:00
teemuatlut
5990266724 Init CS pins before loading settings (#9566) 2018-02-10 14:08:53 -06:00
teemuatlut
d3fdb44ad8 Update TMC section with SW SPI pins (#9554) 2018-02-09 22:54:34 -06:00
Scott Lahteine
3168f0e646
Merge pull request #9549 from thinkyhead/bf2_prevent_comments_resetting 
[2.0.x] Prevent watchdog reset due to many comments
 2018-02-09 07:13:26 -06:00
Scott Lahteine
9be6aa3f79
Merge pull request #9544 from thinkyhead/bf2_reliable_probe_heaters_off 
[2.0.x] More reliable PROBING_HEATERS_OFF with BED_LIMIT_SWITCHING
 2018-02-09 07:12:29 -06:00
Scott Lahteine
c0dd9ef9f2
Support for AnyCubic TriGorilla board (#9551) 2018-02-09 05:41:52 -06:00
Scott Lahteine
da693a636e Fix handling of escapes in serial input 2018-02-09 05:19:33 -06:00
Scott Lahteine
cc9cef7f7a Fix HAS_CONTROLLER_FAN in is_power_needed 2018-02-09 05:19:33 -06:00
Scott Lahteine
112917cfef No EXTRUDER_RUNOUT_PREVENT during print 2018-02-09 05:19:33 -06:00
Scott Lahteine
c30a8067ab Prevent watchdog reset due to many comments 
Addressing #7449
 2018-02-09 05:19:33 -06:00
Scott Lahteine
b7053156fe Minor comment/condition cleanup 2018-02-09 01:53:35 -06:00
Scott Lahteine
f64d300cfd
Sanity check SERIAL_PORT 
Addressing #7400
 2018-02-09 00:44:15 -06:00
Scott Lahteine
5a70887467
Size lcd_status_message based on language (#9545) 2018-02-08 23:03:47 -06:00
Scott Lahteine
545cd8fa60 Tweak malyanlcd.cpp 2018-02-08 22:00:23 -06:00
Scott Lahteine
e698998343 More reliable PROBING_HEATERS_OFF with BED_LIMIT_SWITCHING 2018-02-08 21:10:11 -06:00
shaktee
27faeafc1b [2.0.x] BIBO Cyclops (#9541) 2018-02-08 21:01:31 -06:00
Scott Lahteine
2014d38e10 NEOPIXEL_BRIGHTNESS parity 2018-02-08 18:55:19 -06:00
Scott Lahteine
694d2ebec0 TMC SW SPI pins in Configuration_adv.h 
Counterpart to #9632
 2018-02-08 18:49:38 -06:00
GMagician
9854262334 [2.0.x] Fix compile warning (#9539) 2018-02-08 17:59:03 -06:00
Scott Lahteine
b639f1ad4b
Correct some retract() comments 2018-02-08 17:57:48 -06:00
Thomas Moore
1541224a81 Enable Z axis and delta sensorless homing (#9516) 2018-02-08 04:20:44 -06:00
Scott Lahteine
b2f8b4ada5
I2C position encoders update (#9533) 
Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.
 2018-02-08 03:57:11 -06:00
Thomas Moore
93af0365e8 [2.0.x] Add support for Cohesion3D ReMix and Mini (#9512) 
* Add support for Cohesion3D ReMix and Mini
* Two separate pins files for pedantic reasons
 2018-02-08 03:14:39 -06:00
Scott Lahteine
23240f7986 Fix sw serial pins for TMC2208 
From #9518 by @melvinisken
 2018-02-08 02:54:49 -06:00
Scott Lahteine
d42a87cb31 Update language Italian 
From #9508 by @tnw513
 2018-02-08 02:10:15 -06:00
Scott Lahteine
2538f019d0 Update language Basque-Euskera 
From #9514 by @1138-4EB
 2018-02-08 02:08:41 -06:00
Scott Lahteine
d168ee9bed Drop leveling include from steppers.cpp 2018-02-08 01:32:19 -06:00
Scott Lahteine
09c8807a36 Minor formatting in queue.cpp 2018-02-08 01:31:19 -06:00
Scott Lahteine
704d33c374 Special override of LCD_WIDTH 2018-02-08 01:30:56 -06:00
Scott Lahteine
b3f115fa0a
Marlin.ino needs no content (#9506) 2018-02-06 02:28:18 -06:00
Scott Lahteine
ca8fdff1af Comment G26 properly 2018-02-06 00:58:28 -06:00
Scott Lahteine
8558264514
Configs for Prusa i3 Pro B GT2560 Rev.A Plus (#9505) 
One without probe and one with BLTOUCH.
 2018-02-06 00:24:21 -06:00
Scott Lahteine
b5e92f4f90
[2.0.x] Enable / disable PSU automatically (#9503) 2018-02-06 00:22:30 -06:00
Scott Lahteine
eecb0188c0 Add ULTI_CONTROLLER to example configs 2018-02-05 22:30:03 -06:00
Scott Lahteine
16739264d3 Add UltiController v2.1 support 
Add compatibility with the original screen bord from Ultimaker 2 printer (UltiController v2.1 with the PG-2864ALBP I2C display)
 2018-02-05 22:30:03 -06:00
Scott Lahteine
a8c4174a13 M100 comment 2018-02-05 21:54:50 -06:00
Scott Lahteine
38d62494ef Adjustment to DOG_CHAR_*_EDIT 2018-02-05 20:25:45 -06:00
Scott Lahteine
8a6feab1c4 Num-to-string functions for DEBUG_LEVELING_FEATURE 2018-02-05 19:08:27 -06:00
Scott Lahteine
766faa05a9
sp 2018-02-05 15:57:29 -06:00
GMagician
f27c89980a [2.0.x] Simplify bltouch configuration (#9488) 2018-02-05 14:38:09 -06:00
GMagician
338dac258b [2.0.x] Fix compiler error when G26 is enabled (#9492) 2018-02-05 14:27:39 -06:00
Scott Lahteine
4ddb6a3a1f
Merge pull request #9470 from thinkyhead/bf2_malyan_clueless 
[2.0.x] Malyan M200 LCD
 2018-02-05 05:03:18 -06:00
Scott Lahteine
03bfc0d7c8
Merge pull request #9439 from thinkyhead/bf2_fix_G26_circle_bumps 
[2.0.x] Change G26 circle angles
 2018-02-04 19:05:18 -06:00
Scott Lahteine
e5ee0b6f6c Implement MALYAN_LCD 2018-02-04 18:52:44 -06:00
Scott Lahteine
b939a2e88c Watchdog conditional for LPC 2018-02-04 18:52:44 -06:00
Scott Lahteine
4925f60cff Add MALYAN_LCD to configs 2018-02-04 18:52:44 -06:00
Scott Lahteine
3a1225e438 Sanity check SENSORLESS_HOMING 2018-02-04 18:52:44 -06:00
Scott Lahteine
2ea4e74ed3 Misc. comments 2018-02-04 17:40:39 -06:00
Scott Lahteine
aecf0c9bb9 Allow override of CS pins generally 2018-02-04 16:36:30 -06:00
Scott Lahteine
0891b58c30 #ifdef tweaks 2018-02-04 16:36:30 -06:00
Bob-the-Kuhn
428f164d02 [2.0.x] Bug fix - "M114 D" and Due (dtostrf C linkage) (#9481) 2018-02-04 16:11:27 -06:00
Scott Lahteine
693843f1fa
Allow override of RAMPS CS Pins (#9472) 2018-02-04 16:00:16 -06:00
ABH10
ac6bf7226a Update of comments in thermistor files. No functional changes. (#8986) 2018-02-04 06:06:21 -06:00
Alexey Shvetsov
da3a0d619c Add Selena Compact board (#9407) 
5-axis, high performance, powerful board with Smoothieware opensource firmware. Designed for 3D printer, Laser cutter or CNC mill. Five changed independent drivers on board. Two extruders 3d printer support.
 2018-02-04 03:15:09 -06:00
Thomas Moore
786746404b [2.0.x] Apply feedrate to nozzle movement for kinematic machines (#8778) 2018-02-04 00:26:05 -06:00
Scott Lahteine
5364b92c37 Drop obsolete string 2018-02-03 23:58:31 -06:00
shaktee
34624cf399 [2.0.x] BIBO TouchX configuration (#9469) 2018-02-03 23:21:02 -06:00
Bob-the-Kuhn
3d72fe0730 snapshot 2018-02-03 21:28:05 -06:00
Scott Lahteine
33ec599ca0 Tweaky LPC1768 SPI spacing/style 2018-02-03 20:25:57 -06:00
Scott Lahteine
c46de340b7 Clean up trailing whitespace 2018-02-03 20:05:23 -06:00
Thomas Moore
e1fd9c08b3 [2.0.x] Add support for LPC1769 at 120 MHz (#9423) 2018-02-03 19:33:26 -06:00
GMagician
6ace57e1b0 [2.0.x] remove duplicated include (#9445) 
This was present in #9357 but lost
 2018-02-03 19:32:05 -06:00
GMagician
9e13d1fad5 [2.0.x] Fix temperature out of LCD (#9461) 
Fix bug introduced in #9415
 2018-02-03 19:25:04 -06:00
Scott Lahteine
e6cdc438fd Change G26 circle angles 
To prevent the nozzle from colliding with the printed pattern.
 2018-02-03 19:17:49 -06:00
Scott Lahteine
a8764ac5d5 G26 parity with 1.1.x 2018-02-02 05:19:14 -06:00
Manuel Valentino
374f2a5e16 [2.0.x] Fixed wrong information about TMC2208 wiring (#9335) 2018-02-02 04:45:55 -06:00
Bob-the-Kuhn
a0570ff1eb Fix caselight on Due (#9364) 2018-02-02 04:13:33 -06:00
Scott Lahteine
b13099de3f General cleanup of HAL code 2018-02-02 03:37:15 -06:00
Scott Lahteine
9b9350e010 Fix jerky Z motion between probes 
Suggested by #9375
 2018-02-02 02:32:11 -06:00
Scott Lahteine
d6e29e9597 Update French language 
Based on #9373 by @nikkoura
 2018-02-02 01:56:25 -06:00
GMagician
e1117a8492 [2.0.x] fix compile errors when CNC_COORDINATE_SYSTEMS is enabled (#9380) 2018-02-02 01:45:46 -06:00
GMagician
ea9ad4e46d [2.0.x] Fix compile error on delta when NO_WORKSPACE_OFFSETS (#9388) 2018-02-02 01:44:48 -06:00
Scott Lahteine
79796b22ad Fix up _Bootscreen.h and _Statusscreen.h 2018-02-02 00:57:16 -06:00
Bob-the-Kuhn
21179f8300 Fix the "slow" version of the G-code parser 2018-02-02 00:35:58 -06:00
Scott Lahteine
c251601916 Simplified SET_BIT, moved to endstops.cpp 2018-02-02 00:34:23 -06:00
Scott Lahteine
eb18ae9003 Define LSBFIRST / MSBFIRST for LPC 2018-02-02 00:34:23 -06:00
Scott Lahteine
f8227abf1c
Merge pull request #9384 from tcm0116/2.0.x-retract 
[2.0.x] Clear retracted status when homing the Z axis
 2018-02-01 23:36:36 -06:00
Scott Lahteine
ea5f91737f
Merge pull request #9392 from studiodyne/studiodyne-pause 
[2.0.x] Pause resuming fix
 2018-02-01 23:32:24 -06:00
teemuatlut
5c69d45f5b [2.0.x] TMC2130 support for LPC platform (#9114) 2018-02-01 21:49:40 -06:00
Scott Lahteine
34160806c0 Fix broken G29 W I J 2018-02-01 21:37:35 -06:00
Scott Lahteine
f5cfdf6efe Use _BV32 to avoid name conflict 2018-02-01 21:37:35 -06:00
Scott Lahteine
6339b506c0 Make sure binary.h is included as needed 2018-02-01 21:37:35 -06:00
studiodyne
51d080d2c1
Update Pause 2018-01-29 21:57:37 +01:00
Thomas Moore
7035471982 Clear retracted status when homing the Z axis 2018-01-29 19:40:04 +00:00
GMagician
6d4bc9a1f8 [2.0.x] Fix SD wrong filename list (#9342) 
If last file in directory has short filename and is preceded by a deleted long file name. SD menu will wrongly report long deleted file name as last entry
 2018-01-26 14:03:51 -06:00
Bob-the-Kuhn
c6e01ebd52 never mind ... 2018-01-25 22:13:32 -06:00
Bob-the-Kuhn
ab709ccac1 add USEABLE_HARDWARE_PWM & clear up some compiler warnings 2018-01-24 21:42:36 -06:00
Scott Lahteine
fc5c1a28d8 Fix M118 parameter parsing 2018-01-24 00:30:13 -06:00
Scott Lahteine
399bca316a Fix has_value with FASTER_GCODE_PARSER 2018-01-24 00:30:13 -06:00
Scott Lahteine
80d3ded895 Change parser codebits from array to int32_t 2018-01-24 00:30:13 -06:00
Scott Lahteine
053b1371c7 Simplify G-code debug option 2018-01-24 00:06:07 -06:00
Scott Lahteine
608f8b10da Parser val method parity with 1.1.x 2018-01-24 00:06:07 -06:00
Scott Lahteine
2bea1bda56 Move more strings to PROGMEM 2018-01-24 00:06:06 -06:00
Scott Lahteine
58671e1bc1 Marlin must override _BV for 32-bit masks! 2018-01-23 23:52:35 -06:00
Scott Lahteine
45cfb16424
Merge pull request #8355 from tcm0116/2.0.x-TwoWire 
[2.0.x] Master-only TwoWire (I2C) class for LPC1768
 2018-01-23 20:14:02 -06:00
Scott Lahteine
1dcfe193ac Optimize some serial strings 2018-01-23 19:14:00 -06:00
Scott Lahteine
9644fe1839 Lightly optimize arc length calculation 2018-01-23 19:13:59 -06:00
Scott Lahteine
c9bda932fe
Patch M114 D logical output 2018-01-23 18:50:37 -06:00
Scott Lahteine
e5ca60acf5 Patch G29 no_action for A and Q 2018-01-23 14:00:06 -06:00
Scott Lahteine
696f8eb4c6 Include Z Fade in log_machine_info 2018-01-23 14:00:06 -06:00
Scott Lahteine
3217da6fa5 Followup patch for TMC stepper init 2018-01-23 14:00:06 -06:00
Scott Lahteine
db031d5d76 Add missing SoftwareSerial begin for TMC2208 
Based on #9299
 2018-01-22 10:43:24 -06:00
Thomas Moore
3db35ba9be [2.0.x] Fix change filament for delta machines (#9295) 2018-01-22 10:21:42 -06:00
Scott Lahteine
2ebf52e57d Fix Skew Correction pre-calculation overflow error 2018-01-22 08:20:21 -06:00
Scott Lahteine
adb2ac4747 Fix skew settings report precision 2018-01-22 08:09:36 -06:00
Scott Lahteine
205c5fa078
Merge pull request #9277 from oysteinkrog/fix/DualX_Endstops 
[2.0.x] Fix DUAL_X_CARRIAGE endstop tests
 2018-01-22 07:42:49 -06:00
Scott Lahteine
90d011cc48 Use ADD_PORT_ARG for all cases 2018-01-22 06:27:22 -06:00
Scott Lahteine
51c7b5d46f Fix set_home_offset bug from bad porting 2018-01-22 06:16:21 -06:00
Scott Lahteine
b1cd012aa6 Clean up and document load/unload/pause/resume 2018-01-22 05:45:46 -06:00
Scott Lahteine
266086670b Better LCD message when heating needed 2018-01-22 04:38:37 -06:00
Scott Lahteine
a718f5bdf3 Don't run M600 on filament runout if the nozzle is cold 2018-01-22 04:38:37 -06:00
Scott Lahteine
61bf8478a2 Add hotEnough methods 2018-01-22 04:38:37 -06:00
Scott Lahteine
7a52dfad55
Merge pull request #9283 from thinkyhead/bf2_jgaurora_configs 
[2.0.x] Add JGAurora A5 support
 2018-01-22 02:21:56 -06:00
Chris Pepper
f875f49caa [2.0.x] LPC1768: Fix: Serial pins disabled correctly when in use (#9193) 2018-01-22 01:54:41 -06:00
Scott Lahteine
c63cffca7f Add example configs for JGAurora A5 2018-01-22 01:27:11 -06:00
Scott Lahteine
7d6c009104 Add thermistor 15 tuned for JGAurora A5 2018-01-22 01:27:11 -06:00
Scott Lahteine
582d073de1 Patch up digital microstepping and SPI CS pins 2018-01-22 01:27:11 -06:00
Scott Lahteine
ab8a1a2a0d Sync gCreate gMax1.5+ config with 1.1.x 2018-01-22 01:05:12 -06:00
Scott Lahteine
f9dbd4d9f4 Updated FolgerTech i3-2020 config 2018-01-22 01:05:12 -06:00
Scott Lahteine
348b454401 Probe bounds based on bed size 2018-01-22 01:05:11 -06:00
Bob-the-Kuhn
a440522f84
Merge pull request #9284 from Bob-the-Kuhn/DUE-pins-debug 
[2.0.x] PINS_DEBUGGING maintenance
 2018-01-21 18:40:39 -06:00
Scott Lahteine
58ed9901d7 Consistent NEOPIXEL_TYPE options 2018-01-21 17:19:38 -06:00
Scott Lahteine
382a5e3318 Clean up trailing whitespace 2018-01-21 17:19:38 -06:00
Øystein Krog
441517bbe1 Fix DUAL_X_CARRIAGE endstops 
\#8170 fixed
 2018-01-21 15:32:19 +01:00
Scott Lahteine
b46932f0c0
Merge pull request #9273 from thinkyhead/bf2_creality_tuneup 
[2.0.x] Fix and improve Creality configs
 2018-01-21 02:53:16 -06:00
Scott Lahteine
49bcb5ce2d
Merge pull request #9220 from benlye/lcd-timer 
[2.0.x] Fix LCD timer string length
 2018-01-21 02:47:59 -06:00
Scott Lahteine
07db5638e2 Add a heating indicator X offset 2018-01-21 02:04:14 -06:00
Scott Lahteine
c68ce8667d Fix and improve Creality configs 2018-01-21 02:04:14 -06:00
Scott Lahteine
8190fdb260
[2.0.x] Option to use Neopixel as case light (#9270) 
* Add option to use Neopixel as case light

* Apply CASE_LIGHT_USE_NEOPIXEL to example configs
 2018-01-20 16:58:41 -06:00
GMagician
9b519864bf [2.0.x] Relative movements fix (#9259) 2018-01-20 15:22:03 -06:00
Scott Lahteine
887664aa61 Restore broken Dual X Carriage 2018-01-20 15:08:50 -06:00
Scott Lahteine
fb044b6a64 Fix HAL_timer_set_current_count for STM32F1 2018-01-20 14:57:17 -06:00
Scott Lahteine
a8638aa20d Update STM32F1 timer code to use libmaple bb_perip 2018-01-20 14:56:57 -06:00
Scott Lahteine
2e2fd8fd79
Merge pull request #9261 from tcm0116/2.0.x-delta_softstops 
[2.0.x] Allow DELTA to compile with soft endstops disabled
 2018-01-20 14:16:30 -06:00
Scott Lahteine
750cc02b3a
Use delay() in serial temp report 2018-01-20 14:13:17 -06:00
Scott Lahteine
9de8c04945
Allow FIL_RUNOUT_PIN override on RAMPS-based boards 2018-01-20 12:00:59 -06:00
Scott Lahteine
57b61491d3
Set FIL_RUNOUT_PIN for Creality CR10-S 
Tested with M43 and found to be connected to DIO 2
 2018-01-20 11:56:57 -06:00
Scott Lahteine
4a4d832344
Use standard encoder pulses/steps for CR-10S 2018-01-20 11:35:52 -06:00
Thomas Moore
44239b1062 Allow DELTA to compile with soft endstops disabled 2018-01-20 09:40:36 -06:00
Scott Lahteine
4bc4351250
Date refresh 2018-01-20 09:17:57 -06:00
Scott Lahteine
303d792b9f
Merge pull request #9253 from tcm0116/2.0.x-mks_sbase 
[2.0.x] Cleanup MKS-SBASE compile warnings
 2018-01-19 22:37:38 -06:00
Scott Lahteine
afec16e644
Merge pull request #9240 from tcm0116/2.0.x-eeprom 
[2.0.x] Follow-on to #9161
 2018-01-19 22:36:24 -06:00
Scott Lahteine
f2ea8a0529
Merge pull request #9197 from p3p/pr_bf2_operation_freemem 
[2.0.x] LPC1768: Free up some RAM
 2018-01-19 22:35:45 -06:00
Scott Lahteine
0c176c677e
Merge pull request #9231 from GMagician/2.0.x-ramps-pins-fixup 
[2.0.x] Expand RAMP case light possibilities
 2018-01-19 22:29:32 -06:00
Scott Lahteine
f2d09f27bb
Merge pull request #9246 from GMagician/2.0.x-bed-temp-limit-fix 
[2.0.x] Standardized max temp values
 2018-01-19 22:27:19 -06:00
Bob-the-Kuhn
16eb966ee3 PINS_DEBUGGING cleanup for DUE 2018-01-19 21:12:24 -06:00
Thomas Moore
63fd23ab1c Cleanup MKS-SBASE compile warnings 2018-01-19 15:46:34 -06:00
Bob-the-Kuhn
11e68541b0
Merge pull request #9245 from Bob-the-Kuhn/TMC2208-sanity-check-2.0.x 
[2.0.x] add TMC2208 sanity check to AVR
 2018-01-19 15:42:53 -06:00
Thomas Moore
429e6ba8a6 Fix lcd_preheat dummy variable types 2018-01-19 15:24:13 -06:00
GMagician
719cd53e09 Standardized max temp values 
Everywhere in menu items temperatures are "defined value" subtracted by 15.
In one place is subtracted by 5
 2018-01-19 19:32:46 +01:00
Bob-the-Kuhn
0ea9cdf4f2 TMC2208 sanity check 2018-01-19 12:19:34 -06:00
Roxy-3D
7c469c0712
Suggested change to fix Due compile problem 2018-01-18 23:00:03 -06:00
Roxy-3D
bfd9728cf4
Serial buffer over run work around for v2.0.0 (#9236) 
* Work around for serial buffer over run

PronterFace sends a lot of M105 commands.  During long operations such
as UBL's G29 P1, G29 P2, G29 P4 and G26 this can over run the serial
buffer.   This results (very often) in a M1 (actually a M1M105) ending
up in the command queue.

Until we figure out a better way to resolve this issue, this will keep
the UBL commands from experiencing bogus commands at thier completion.
 2018-01-18 19:57:18 -06:00
GMagician
c371bdc499 Expand RAMP case light possibilities 
Pin 6 is only used by servos when 2 or more of them are used
 2018-01-18 18:31:08 +01:00
blye
7c18c2ea5f Fix LCD timer string length 2018-01-17 21:10:45 +00:00
Roxy-3D
9d0cf02fef
Correct mesh size calculations 2018-01-17 09:36:12 -06:00
Scott Lahteine
c7bad74d8f
Merge pull request #9202 from benlye/m73-bugfix 
[2.0.x] Fix progress bar duration when time is exactly 86400s
 2018-01-16 21:14:58 -06:00
Roxy-3D
af9b32e3b9
Give PronterFace time to print the UBL What information... 
Give PronterFace time to print the UBL What information...
 2018-01-16 18:00:57 -06:00
Roxy-3D
acb1e31374
Fix UBL Mesh Size regression 2018-01-16 17:58:15 -06:00
Roxy-3D
f5f1b069ad
Convert UBL mesh tilting to all use the same algorithm (#9204) 
A number of regressions were patched also. The UBL G29 P2 and P4 Press and Hold had stopped working. It is very possible this is broken in the bugfix_v1.1.x branch also.

The main purpose of the Pull Request is to get the 3-Point mesh tilting to use the LSF algorithm just like the grid based mesh tilt. This simplifies the logic and reduces the code size some what. But the real reason to do it is the 3-Point case can be solved exactly. And by feeding these numbers into the LSF algorithm it provides a way to check all that code for 'correctness'.
 2018-01-16 11:08:00 -06:00
blye
554d849827 Fix duration when time is exactly 86400s 2018-01-16 08:12:00 +00:00
Christopher Pepper
6f1bf5d212 LPC1768: Config: default to SDSORT_LIMIT = 64 instead of 256 2018-01-15 22:02:21 +00:00
Christopher Pepper
1e65562d55 LPC1768: HAL: only initialise used HardwareSerial ports 
Misc formatting
 2018-01-15 22:00:59 +00:00
Roxy-3D
9dacd54a50
Get FT-i3-2020 configuration files into compliance with ?_BED_SIZE 2018-01-15 15:33:51 -06:00
Scott Lahteine
d178d6e921 M503 patch for EEPROM_CHITCHAT off 
Fix #9155
 2018-01-15 06:09:25 -06:00
Scott Lahteine
fa432508b0 Followup to Ender config 2018-01-15 06:00:21 -06:00
Thomas Moore
6856eccc77 Master-only TwoWire class for LPC1768 2018-01-15 05:22:03 -06:00
Scott Lahteine
d5bf9e74c4
Merge pull request #8996 from p3p/pr_bf2_more_adc_filter 
[2.0.x] PID control fix and more LPC1768 ADC filtering
 2018-01-15 05:14:25 -06:00
Scott Lahteine
4d2f277d43
Merge pull request #9189 from psavva/tmc_debug_compile_fix 
[2.0.x] Fixes TMC_DEBUG compilation error
 2018-01-15 04:52:21 -06:00
Scott Lahteine
43d3d024ac
Update tmc_util.cpp 2018-01-15 04:51:59 -06:00
Panayiotis Savva
ad500b01e0 Fixes TMC compilation error 2018-01-15 12:43:22 +02:00
Scott Lahteine
f4e4c7a7c8
Merge pull request #9188 from thinkyhead/bf2_creality_ender 
[2.0.x] Add Creality Ender config/board
 2018-01-15 04:33:09 -06:00
Scott Lahteine
2038722c52 LARGE_FLASH obsolete 2018-01-15 03:42:24 -06:00
Scott Lahteine
f887719a40 Creality Ender board support 2018-01-15 03:42:24 -06:00
Scott Lahteine
9a2dd0bc5a Creality Ender 2/4 configuration 2018-01-15 03:42:23 -06:00
Scott Lahteine
2c18faf3e4 General cleanups for HAL 2018-01-15 02:46:37 -06:00
Scott Lahteine
42933c804a Cleanups for STM32F7 2018-01-15 02:46:37 -06:00
Morten
a0246c5c96 Add support for STM32F7 MCU 2018-01-15 01:13:03 -06:00
Scott Lahteine
a27fa80a7e More featureful CR-10S configuration 2018-01-15 01:06:06 -06:00
Scott Lahteine
1a3d2ad275
Merge pull request #9168 from marvin-sinister/rename-M100-2.0.x 
[2.0.x] Rename M200 pins file to uppercase
 2018-01-15 00:49:06 -06:00
Scott Lahteine
a408209d24 More reliable temperature serial report? 2018-01-15 00:43:51 -06:00
Scott Lahteine
5f807e37c5 A second rename saves nine 2018-01-14 23:44:19 -06:00
Scott Lahteine
3ae41e5f7f
Merge pull request #9152 from thinkyhead/bf2_anti_stutter 
[2.0.x] Ensure smooth printer movements
 2018-01-14 23:34:01 -06:00
Scott Lahteine
02ff12d491 More up front option to show SD percentage 2018-01-14 23:32:39 -06:00
Scott Lahteine
3b15c88225
Merge pull request #9153 from thinkyhead/bf2_malyan_support 
[2.0.x] Fix support for Malyan M150
 2018-01-14 22:54:00 -06:00
Scott Lahteine
e753d6298f FLSUN Kossel example configs 2018-01-14 22:52:35 -06:00
Scott Lahteine
77c2d810f9 Bring configs up to date 2018-01-14 22:52:06 -06:00
Scott Lahteine
3952070800 Link to marlinfw.org boot screen tool 2018-01-14 22:41:05 -06:00
Scott Lahteine
0cd397a3f8 Add instructions for Malyan M150 2018-01-14 21:15:03 -06:00
Scott Lahteine
344ebc3bd2 Create and use pins_MELZI_MALYAN.h for Malyan M150 2018-01-14 21:14:58 -06:00
Scott Lahteine
094e9b1dab Remove ARDUINO_ARCH_SAM from serial.h too? 2018-01-14 21:07:10 -06:00
Scott Lahteine
c37d38886c Fix serial.h avr block 
Followup to #8148
 2018-01-14 21:07:10 -06:00
Scott Lahteine
4f5e087ff4 Planner anti-stutter by Sebastian Popp 2018-01-14 21:07:10 -06:00
Scott Lahteine
ac368f2788 Add STEPPER_ISR_ENABLED() to HALs 
Some also get a `HAL_timer_interrupt_enabled` function.
 2018-01-14 21:07:10 -06:00
Scott Lahteine
5578dccaa0
Merge pull request #9161 from tcm0116/2.0.x-eeprom 
[2.0.x] Fix EEPROM SettingsData for 32-bit architectures
 2018-01-14 20:50:37 -06:00
Scott Lahteine
6ba8cf8405
Merge pull request #9163 from GMagician/2.0.x-SD-issues-fix 
[2.0.x] sd issue fix
 2018-01-14 20:48:52 -06:00
Marvin Sinister
50c55b25f7 Renamed to upercase 2018-01-13 15:02:07 +01:00
GMagician
6667a916a4 Indentation fix 2018-01-13 09:48:26 +01:00
GMagician
be717b3c07 Save some program memory 
This will save some program memory with no speed lose
 2018-01-13 08:56:51 +01:00
GMagician
f37c64ee5b Fix unsupported CMD59 
It seems that some SD cards don't support CRC_ON_OFF command. This fix will permit to use also these cards but leaving CRC check active on the system
 2018-01-13 08:53:12 +01:00
Thomas Moore
cfd989d7c5 Fix EEPROM SettingsData for 32-bit architectures 2018-01-12 19:38:23 -06:00
Bob-the-Kuhn
da600e5fbe
Merge pull request #9132 from Bob-the-Kuhn/add-VIKI2-to-Travis 
[2.0.x] add VIKI2 test to Travis & fix LCD contrast (again)
 2018-01-12 00:42:04 -06:00
Scott Lahteine
742cff5f3c Followup to #9141 2018-01-11 22:15:01 -06:00
Thomas Moore
84de428d30 [2.0.x] Fix compile errors (#9141) 
* Update persistent_store_impl.cpp
* Remove define BYTE from serial functions since Arduino docs typically show 0 for the normal case.
 2018-01-11 21:43:26 -06:00
Bob-the-Kuhn
e633ce06c7 LCD contrast type mismatch is back 
WORKS!
 2018-01-11 10:32:58 -06:00
Scott Lahteine
e654ea1e1a
Merge pull request #9130 from thinkyhead/bf2_tmc_followup 
[2.0.x] More TMC followup
 2018-01-11 03:40:45 -06:00
Scott Lahteine
8ac246162e Creality CR-10S configurations 
Provided by printedsolid.com
 2018-01-11 01:10:17 -06:00
Scott Lahteine
048486390e Bring some configs up to date 2018-01-11 01:10:17 -06:00
Scott Lahteine
6a043eee55 Various updates for TMC support 2018-01-10 23:04:48 -06:00
Scott Lahteine
d7fd78cb91
Merge pull request #8148 from tcm0116/2.0.x-multi_host 
[2.0.x] Add multi-host support
 2018-01-10 02:38:59 -06:00
teemuatlut
a8c446c3bc [2.0.x]DUE: Fix includes for SDSUPPORT (#9112) 2018-01-10 00:46:34 -06:00
Thomas Moore
f7efac57b7 Multi-host support 2018-01-10 00:14:47 -06:00
Thomas Moore
dabb75034c Update example configurations 2018-01-10 00:01:20 -06:00
Bob-the-Kuhn
6a50adb4d5 works 2018-01-09 22:15:33 -06:00
Scott Lahteine
5c076a6d93 Improved M915 description 2018-01-09 18:56:27 -06:00
Scott Lahteine
a94104dbb5
Merge pull request #9113 from teemuatlut/TMC_followup 
[2.0.x]TMC followup
 2018-01-09 18:46:35 -06:00
Dave Johnson
554e577676 SERIAL_STATS_* features not supported on USBCON targets (#9127) 2018-01-09 18:42:55 -06:00
Dave Johnson
2db666e99a Enable USE_ZMIN_PLUG on SCARA example (#9126) 2018-01-09 18:41:28 -06:00
Scott Lahteine
7e000e6af4
More EEPROM field debugging (#9123) 2018-01-09 18:33:44 -06:00
GMagician
3a99dc7c5c 2.0.x Fix compiler warning (#9116) 
Fix duplicate language define warning
 2018-01-09 16:54:41 -06:00
GMagician
5295b4713d [2.0.x] add semitec 104NT-4 (#9119) 
Table is very very similar to old 104-GT2 so I added only the name and recycled old ID
 2018-01-09 16:53:12 -06:00
teemuatlut
cdc61ebf53 Add M915 configuration option 2018-01-09 18:28:48 +02:00
teemuatlut
9d923c6c03 Fix TMC gcode commands 2018-01-08 18:45:05 +02:00
Scott Lahteine
99516572b1 Fix TMC current read from EEPROM 2018-01-07 20:48:46 -06:00
Tannoo
f26805e862 [2.0.x] UBL Mesh Storage Message (#9095) 2018-01-07 20:33:53 -06:00
Christopher Pepper
14dcad6bbc LPC1768: Increase ADC median filter from 3 values to 23 
Clarify the HAL_adc_get_result method to make sure correct values enter the filters

HAL: Fix the PID control loop for non-AVR platforms
 2018-01-07 22:15:20 +00:00
Scott Lahteine
60d07f20e7 Make mbl.has_mesh() a method 2018-01-07 00:13:36 -06:00
Scott Lahteine
86818c9a89 Move MBL functions into the class 2018-01-07 00:13:36 -06:00
Unknown
bbb8d4c802 Set has_mesh if user issues G9 S3 
Prevents user from having to manually run through entire manual leveling process only to enable mesh so they can manually restore their offline mesh backup
 2018-01-06 21:07:07 -08:00
Scott Lahteine
2b5a9be49c
Fix M503 skew output 
Followup to 19e75ccf86
 2018-01-06 20:55:57 -06:00
Scott Lahteine
cf2922f164 Laser/spindle PWM off on M5 2018-01-06 15:29:22 -06:00
GMagician
5fb6dd1424 Bmp fix 
Clockwise arrow fixed
 2018-01-06 19:02:36 +01:00
Bob-the-Kuhn
cb0e826c5d
Merge pull request #9068 from Bob-the-Kuhn/SD-detect 
[2.0.x] SD card detect improvement
 2018-01-05 21:09:57 -06:00
Bob-the-Kuhn
f72b0a7b04 1234 2018-01-05 20:36:05 -06:00
Scott Lahteine
702c8acdd5 Settings FIELD_TEST fix 2018-01-05 19:13:30 -06:00
Scott Lahteine
e89f1453ab UBL G29 works without settings.load() 2018-01-05 15:48:34 -06:00
Scott Lahteine
950be70a33 Add FIELD_TEST to validate storage 2018-01-05 15:48:34 -06:00
Scott Lahteine
760c912ab9 Add data size validation 2018-01-05 15:48:34 -06:00
Scott Lahteine
b91ca168fb Add a struct defining EEPROM storage 2018-01-05 15:48:34 -06:00
Scott Lahteine
51e0f2bee3 Add MarlinSettings::validate() 2018-01-05 14:35:24 -06:00
Scott Lahteine
878f54c27b Write filler with NO_VOLUMETRICS 2018-01-05 10:29:49 -06:00
Scott Lahteine
3ea6745b36 Pretty up TMC current write 2018-01-05 10:29:49 -06:00
Scott Lahteine
3319765034 Detab some HAL files 2018-01-05 10:28:17 -06:00
Scott Lahteine
1c41de16d4 Trailing whitespace clean 2018-01-05 10:11:31 -06:00
Scott Lahteine
1746a7352e
Merge pull request #9042 from thinkyhead/bf2_M701_M702 
[2.0.x] Improved Pause/Load/Unload, M701-M702
 2018-01-04 19:41:58 -06:00
Scott Lahteine
048d8a0158 CheapTRONIC v2.0 additions/revisions 
Based on #9030
 2018-01-04 18:00:25 -06:00
Roxy-3D
3a4e107b6b
use SERIAL_EOL(); instead of new line string 2018-01-04 16:20:18 -06:00
Roxy-3D
a5dfe08a81
Add precision to planner.xy_skew_factor so it doesn't print as 0.00 2018-01-04 16:14:09 -06:00
Roxy-3D
19e75ccf86
Add enough precision so planner.xy_skew_factor doesn't print as 0.00 2018-01-04 16:02:22 -06:00
Scott Lahteine
4fb60e1562 M702.cpp => M701_M702.cpp 2018-01-04 15:07:37 -06:00
Scott Lahteine
7541316bb4 Add M701/M702 Filament Load/Unload, M603 2018-01-04 15:07:37 -06:00
Scott Lahteine
81211da7b4 M701 / M702 language changes 2018-01-04 05:05:28 -06:00
Scott Lahteine
8704e533da Apply FILAMENT_LOAD_UNLOAD_GCODES to example configs 2018-01-04 03:56:36 -06:00
Scott Lahteine
455592eee8 Improvements to LCD menu macros 2018-01-04 03:56:36 -06:00
Scott Lahteine
a80f2eea23 Group leveling reports for folding 2018-01-04 03:56:36 -06:00
Scott Lahteine
190cd0a111 Nozzle park args 2018-01-04 03:56:36 -06:00
revilor
0e93506985 Fix for issue #9005, #8942 - Bed PID autotuning (#9036) 2018-01-04 03:26:14 -06:00
Bob-the-Kuhn
016e46a3c0
Merge pull request #9009 from Bob-the-Kuhn/Due-RRDFG-power-up-garbage 
[2.0.x] Due - fix power up garbage on RRDFG LCD
 2018-01-03 23:19:29 -06:00
studiodyne
31582caa07 2.0 Fix for bad Pause extruder position resuming (#9029) 2018-01-03 23:18:27 -06:00
Bob-the-Kuhn
4626d04067 as good as i can get it 
minor edits to force new Travis test (last one timed out)

Update u8g_com_HAL_DUE_st7920_sw_spi.cpp

initial power up display garbage gone
 2018-01-03 22:46:31 -06:00
Scott Lahteine
4af3d436b2 M303 pid autotune cleanup, commentary 2018-01-03 21:30:45 -06:00
Bob-the-Kuhn
e5b71af8c9 snapshot 
found a few more nasties
 2018-01-03 10:41:23 -06:00
Scott Lahteine
724e3f33bc
Merge pull request #9001 from Tannoo/(2.0.x)_LCD_EEPROM_init_fix 
[2.0.x] EEPROM init fix
 2018-01-03 05:47:01 -06:00
revilor
959a2d2527 Add beginTransaction to HAL SPI (#9019) 2018-01-03 05:12:25 -06:00
Tannoo
e43f3ac989 EEPROM init fix 2018-01-03 04:31:01 -06:00
Scott Lahteine
fc67c64b8f
Merge pull request #8989 from tcm0116/2.0.x_ubl 
[2.0.x] Fix UBL compilation warnings
 2018-01-02 21:38:45 -06:00
Thomas Moore
8afc4f8d9d Fix UBL compilation warnings 2018-01-02 21:00:06 -06:00
Bob-the-Kuhn
eca5cc8669
Merge pull request #9003 from Bob-the-Kuhn/Due-PINS_DEBUG-&-related 
[2.0.x] add Due PINS_DEBUG support & misc improvements (replaces PR #8990)
 2018-01-02 18:47:53 -06:00
Bob-the-Kuhn
e9fc7bc69c
Merge pull request #9000 from Bob-the-Kuhn/2.0-LCD-contrast 
[2.0.x] lcd_contrast type mismatch work around
 2018-01-02 18:46:31 -06:00
Bob-the-Kuhn
5574fad69c copy of PR #8991 code 
Formatting tweaks

correct array initialization & remove test code
 2018-01-02 11:17:46 -06:00
Scott Lahteine
d190c702de
Add MKS_BASE Microstepping pins 
Based on #9008
 2018-01-01 18:49:21 -06:00
Scott Lahteine
5e01ee8adf Temperature updates for parity with 1.1.x 2018-01-01 18:29:08 -06:00
Bob-the-Kuhn
adb9ecf3cc copy of PR #8990 2018-01-01 16:11:56 -06:00
Roxy-3D
39e5fabfa9
Z BabyStepping should not be dependent on a bed leveling system being active 2018-01-01 14:46:50 -06:00
Bob-the-Kuhn
ef911a2d12 works 2018-01-01 14:35:16 -06:00
Scott Lahteine
d80c4f1a6e Fix typo in delta call to buffer_line 
Fix #8901
 2017-12-31 01:40:07 -06:00
Scott Lahteine
9312ee63b0
Merge pull request #8979 from thinkyhead/bf2_sync_up_configs 
[2.0.x] Synchronize configs with 1.1.x
 2017-12-31 01:15:43 -06:00
Scott Lahteine
41dfb229ec
Merge pull request #8978 from thinkyhead/bf2_slimming_option 
[2.0.x] SLIM_LCD_MENUS option
 2017-12-31 00:56:29 -06:00
Scott Lahteine
3dd04736c0
Update M17_M18_M84.cpp 2017-12-31 00:26:45 -06:00
Scott Lahteine
2929c9e56f A specific option to SLIM_LCD_MENUS 2017-12-31 00:11:22 -06:00
Scott Lahteine
10edb469bb Apply SLIM_LCD_MENUS to example configs 2017-12-31 00:11:21 -06:00
Scott Lahteine
5294fd132f
Merge pull request #8924 from ejtagle/bugfix-2.0.x 
[2.0.x] Improve SW SPI for DUE a bit more
 2017-12-30 23:32:46 -06:00
Scott Lahteine
0b4a46fa6c Bring configs up to date with 1.1.x 2017-12-30 23:28:53 -06:00
Scott Lahteine
7cc2193bce
Add Tronxy X1 example config (#8972) 2017-12-30 17:25:31 -06:00
etagle
729a9f55fc Improved Sw SPI on DUE HAL a bit more. 
Now the USB MSD can transfer at 750k/s. Previously, it was 500k/s. I think this is the maximum achievable speed using Sw SPI.
 2017-12-30 17:24:38 -06:00
Scott Lahteine
615146c069 Enqueue commands better in ultralcd.cpp 2017-12-30 04:44:59 -06:00
Scott Lahteine
9686ffedef Single pause flag also indicates SD print pause 2017-12-30 04:44:59 -06:00
Scott Lahteine
6d94bbf618 Apply some PGM_P pointers 2017-12-30 04:03:17 -06:00
Bob-the-Kuhn
cba44128d5 fix include 2017-12-29 10:08:30 -06:00
Scott Lahteine
427df8792d Fix Capabilities Report 2017-12-28 21:08:59 -06:00
Scott Lahteine
2526ac6500 Display up to 3 extruders on char LCD 
…and show bed level indicator at the position of the [H] icon, when a heated bed exists.
 2017-12-28 20:17:42 -06:00
Scott Lahteine
db32c185ae
Merge pull request #8860 from Bob-the-Kuhn/2.0.x-DUE-RRDFGSC 
[2.0.x] DUE - update for Reprap Discount Full Graphic Smart Controller
 2017-12-27 05:06:49 -06:00
Scott Lahteine
9ecdd1f4c7 Multi extruder support for M600 and LCD 2017-12-27 04:33:25 -06:00
Scott Lahteine
a1ce6e8ff4 Clear lcd_clicked immediately on use 2017-12-26 22:26:04 -06:00
Scott Lahteine
5effe1590c Fix NO_VOLUMETRICS bug 2017-12-26 20:04:44 -06:00
Scott Lahteine
f163eede78 No sub-menu if NO_VOLUMETRICS 
For parity with #8911
 2017-12-26 18:28:42 -06:00
Scott Lahteine
2c4e03d2cf Indentation of a SW SPI file 2017-12-25 09:34:43 -06:00
Scott Lahteine
1a827d5b68 Opening brace tweaks 2017-12-25 09:34:43 -06:00
Bob-the-Kuhn
a142fab155 Enable RRDFGSC on Due 2017-12-25 09:22:14 -06:00
Scott Lahteine
b259bb4670 Fix tmc_util global vars 2017-12-25 09:05:31 -06:00
Scott Lahteine
4ef965cc40 Fix compiler warnings 2017-12-25 08:53:01 -06:00
Scott Lahteine
9e8008c49c Fixes for G29, esp. 3POINT 2017-12-25 08:37:27 -06:00
Scott Lahteine
026e301307 lcd_map_control deps on ULTIPANEL 2017-12-25 07:46:25 -06:00
Scott Lahteine
f2731c9f93 Allow consecutive uses of G29 2017-12-25 06:32:33 -06:00
Scott Lahteine
4b49ea1e92 General cleanup of config-store, reset_bed_level 2017-12-25 05:16:01 -06:00
Scott Lahteine
2925852244 Fix GT2560 A+ servo pin 2017-12-25 02:18:56 -06:00
Scott Lahteine
c6354fa153 Tweak M125 code 2017-12-25 01:39:55 -06:00
Scott Lahteine
3b51f5c67e Add pause/resume action to example configs 2017-12-25 01:39:18 -06:00
Scott Lahteine
f704f405af Add pause/resume actions on M600, M125 2017-12-25 01:39:18 -06:00
Thomas Moore
f0a8a1a853 [2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8866) 
* Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
 2017-12-25 01:38:06 -06:00
Scott Lahteine
705ea98fd3 Comment return false in motion functions 2017-12-24 22:57:15 -06:00
Scott Lahteine
50366b00d5 Tweak cleaning buffer / SD finished command 2017-12-24 20:35:05 -06:00
Scott Lahteine
28fc8741d6 Reduce default jerk. XY by half. Z by 1/4 2017-12-24 19:54:11 -06:00
Bob-the-Kuhn
1a948cbd93 Fix SET_OUTPUT glitch - LPC1768 & DUE 2017-12-24 19:25:32 -06:00
Scott Lahteine
869c89d83f
Merge pull request #8865 from thinkyhead/bf2_more_scara_scaling 
[2.0.x] SCARA Feedrate Scaling for G2/G3 - using HYPOT
 2017-12-24 19:18:13 -06:00
Scott Lahteine
1cf1cf8759 Add RADDS_DISPLAY to example configs 2017-12-24 19:00:23 -06:00
Even
ea1a8d1223 add original RADDS LCD + Controller 
adds setup for the original Radds Display+Controller+SD Card Reader PCB
http://doku.radds.org/dokumentation/lcd-display/
 2017-12-24 19:00:23 -06:00
Scott Lahteine
4a8fd8ae92
Merge pull request #8853 from ejtagle/bugfix-2.0.x 
USB Mass Storage Implementation / CDC with HW flow control and misc fixes and improvements for Arduino DUE/RE-ARM based boards
 2017-12-24 18:50:28 -06:00
Scott Lahteine
aa97cd6e9b
Merge pull request #8871 from petrzjunior/bugfix-2.0.x 
[2.0.x][Language] Update Czech for Dec 2017
 2017-12-24 18:48:59 -06:00
Thomas Moore
2917d1217d Revert "Followup to #8698" 
This reverts commit 4e891e9fb7.
 2017-12-23 17:00:33 -06:00
Petr Zahradník
69a51a426c
Update Czech language Dec 2017 2017-12-22 19:35:09 +01:00
Scott Lahteine
caa5093498 General DELTA_IK macro 2017-12-21 22:41:57 -06:00
Scott Lahteine
c694608450 Apply SCARA_FEEDRATE_SCALING to G2/G3 2017-12-21 22:33:27 -06:00
Scott Lahteine
97d509d4d2 Revert "Improved Core-compatible jerk code" 
Reverting commit 3cd7659
 2017-12-21 16:54:30 -06:00
Scott Lahteine
5bc2acc072 Restore position_float to fix LIN_ADVANCE 2017-12-21 16:45:46 -06:00
etagle
33a6fc70e4 Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC) 2017-12-21 02:42:46 -03:00
etagle
d8a4db72ac Reimplemented SW SPI for DUE in assembler. This allows to reach 12Mhz as SPI Clock and improves 4x the transfer speed to the SD card. This is REQUIRED so access to SD from USB is usable (allows 600Kbytes/second transfer speeds) 2017-12-21 02:35:49 -03:00
etagle
99b2fc2066 Adjusted timings on the ST7290 u8glib so RE-ARM and RAMPS4DUE have no problems when writing to the graphics LCD. This fixes Issue #8787 - Special thanks to Bergerac56 for testinf this out !!! 2017-12-21 02:33:22 -03:00
etagle
498ea7512a Exposed SDCard interface to the public, to USB MSD is able to read/write sectors on the SD card 2017-12-21 02:30:18 -03:00
etagle
9aff55ed1f Backported latest improvements and fixes from the SdFat liibrary to our own version. This includes support for CRC7 validation on commands and also, made sure that even if using software SPI implementations, SD card speed is properly adjusted when transitioning from INITIALIZATION to DATA TRANSFER mode. ALL HALs implement spiInit, even in SW SPI mode, and we NEED this change to improve 25x the transfer speed of the SD card and allow implementations of USB MSD 2017-12-21 02:29:00 -03:00
etagle
7447979110 Fixed some warnings on the MakerParts configuration, when compiling using the AVR toolchain (integer overflow on the preprocessor calculations) 2017-12-21 02:23:24 -03:00
etagle
b6f9c333d4 Adding hooks into the idle loop so HALs can execute 2nd plane tasks, such as serving SD card read/writes requested from the USB MSD layer 2017-12-21 02:22:08 -03:00
victorpv
2ec4113cb2 Changes to STM32F1 HAL (#8833) 
Some to correct missing files from previous PR to completely avoid
HardwareTimer Class (reduce overhead). Some changes to formatting.
Changes to DMA ADC to work correctly.
Change to F1 sanity check.
 2017-12-20 16:16:36 -06:00
Scott Lahteine
913d9e9a59 Matching sign across filwidth vars 2017-12-20 00:17:19 -06:00
Scott Lahteine
3cde4c78b2 Use wildcard *.cpp in Makefile 
Based on #8738
Addressing #8731
 2017-12-19 23:44:46 -06:00
Scott Lahteine
fdc5e72720 A single setting to validate filament width 2017-12-19 21:33:25 -06:00
Scott Lahteine
93a6a4e1a8 Add VOLUMETRIC capability item 2017-12-19 20:11:23 -06:00
Scott Lahteine
933f76fda3 Option to disable all volumetric extrusion 2017-12-19 19:51:25 -06:00
Scott Lahteine
31e33d2acd Add NO_VOLUMETRICS to example configs 2017-12-19 19:51:25 -06:00
Scott Lahteine
fc9ee1a4de Fix up serial sanity check 2017-12-19 19:11:43 -06:00
Scott Lahteine
de5ca96654 More parity with 1.1.x, plus whitespace 2017-12-19 18:36:16 -06:00
Scott Lahteine
a891d8d738
Merge pull request #8820 from thinkyhead/bf2_mks_sbase_spi 
[2.0.x] Fix SDSUPPORT for MKS SBASE
 2017-12-17 21:15:49 -06:00
Scott Lahteine
097a26007f Fix SDSUPPORT for MKS SBASE 
Fix supplied by @cjsoong in https://github.com/MarlinFirmware/Marlin/issues/8750#issuecomment-350779983
 2017-12-17 03:05:33 -06:00
Scott Lahteine
8df5955da4 Revert "Reset timer count before first block step" 
This reverts commit 5cf6a062e3.
 2017-12-17 02:37:35 -06:00
Scott Lahteine
957bbab57f Update inc files for parity with 1.1.x 2017-12-16 20:20:06 -06:00
Scott Lahteine
f79026acc1 Apply MKS_12864OLED_SSD1306 to examples 
Followup to #8814
 2017-12-16 20:15:36 -06:00
Dan Delaney
b055d8c39c [2.0.x] Adding support for using the MKS_12864OLED with the SSD1306 controller (#8814) 
* Adding support for using the MKS_12864OLED with the SSD1306 controller

* Update comment for correct controller type
 2017-12-16 18:47:04 -06:00
Scott Lahteine
15d05748df Adding support for the Tronxy and Zonestar LCD 2017-12-15 19:13:52 -06:00
Scott Lahteine
9abbcc3ee0 Apply ZONESTAR_LCD to example configs 2017-12-15 19:11:02 -06:00
Dave Johnson
aed0cfa3d1 Various fixes for 2.0.x configs 2017-12-15 17:09:46 -06:00
Scott Lahteine
674deaf223 Add NANODLP_ALL_AXIS to config examples 2017-12-15 16:22:56 -06:00
robpower
5595098063 V2 Extended NanoDLP_Z_Move_Sync to G4 & G28,Added all axis option. 2017-12-15 16:22:55 -06:00
Scott Lahteine
2b7db90340 Bring Malyan M200 config up to date 2017-12-15 15:47:22 -06:00
Scott Lahteine
8b12371e45 Change some hex case 2017-12-15 15:47:22 -06:00
Scott Lahteine
4782acf60e
Merge pull request #8780 from fiveangle/bf2-typo 
[2.0.x] typo in Marlin.cpp
 2017-12-15 15:25:41 -06:00
teemuatlut
0cd1e91056 [2.0.x] TMC driver update (#8769) 2017-12-15 15:03:14 -06:00
Scott Lahteine
09d13f186f
Correct unskew, after all 2017-12-15 14:24:20 -06:00
Dave Johnson
0d531d9655 Missing HAS_HEAT_BED conditional 
Fixes issue found in #8779
 2017-12-15 11:33:37 -08:00
Dave Johnson
69efb87d19 typo in Marlin.cpp 2017-12-14 08:20:45 -08:00
Scott Lahteine
368c124de8 Fix Planner::unskew parity with skew 2017-12-13 17:46:48 -06:00
Scott Lahteine
cf2193c07f Comment, fix filament width sensor 2017-12-13 02:32:34 -06:00
Scott Lahteine
a641992c1d
Merge pull request #8762 from victorpv/patch-2 
[2.0.x] STM32F1 HAL: Fix issue #8585. Updates to readme.
 2017-12-12 18:28:18 -06:00
Eduardo José Tagle
ac168a03c8 Fixes for the Arduino DUE HAL (Serial Port, Graphics Display, EEPROM emulation) (#8651) 
* Fixing the DUE serial port assignments: Now -1 means the SAM3x USB Device emulating a serial port, and 0 means the USB to serial adapter included as a programming port

* Improving the Fast IO port access implementation on Arduino DUE

* Implemented EEPROM emulation on Due by storing data on the internal FLASH (with wear leveling)

* Implemented a Software SPI for the ST7920 graphics display for the Arduino RAMPS for DUE, as the default one in u8glib is clocking data too fast on ARM, and the display does not understand it.

* Fixing the case where the serial port selected is the USB device

* Adding configuration for the Makerparts 3D printer (www.makerparts.net)

* Tuned MakerParts acceleration on X and Y axis so it never loses steps. Also adjusted pulses per mm to match default hw configuration

* Fine tuned Maximum acceleration for MakerParts printer

* Style cleanup

* Style cleanup (2)

* Style fixes (3)

* Fixing the DUE serial port assignments: Now -1 means the SAM3x USB Device emulating a serial port, and 0 means the USB to serial adapter included as a programming port

* Improving the Fast IO port access implementation on Arduino DUE

* Implemented EEPROM emulation on Due by storing data on the internal FLASH (with wear leveling)

* Implemented a Software SPI for the ST7920 graphics display for the Arduino RAMPS for DUE, as the default one in u8glib is clocking data too fast on ARM, and the display does not understand it.

* Fixing the case where the serial port selected is the USB device

* Adding configuration for the Makerparts 3D printer (www.makerparts.net)

* Tuned MakerParts acceleration on X and Y axis so it never loses steps. Also adjusted pulses per mm to match default hw configuration

* Fine tuned Maximum acceleration for MakerParts printer

* Style cleanup

* Style changes to u8g_dev_st7920_128_64_sw_spi.cpp

* Even more improvements to the FastIO HAL for DUE. Now WRITE() is 2 ASM instructions, if value is constant, and 5 cycles if value is not constant. Previously, it was 7..8 cycles

* After some problems and debugging, seems we need to align the interrupt vector table to 256 bytes, otherwise, the program sometimes stops working

* Moved comments out of macro, otherwise, token pasting does not properly work sometimes

* Improved Software SPI implementation on DUE: Now it honors the selected speed passed to spiInit(). This allows much faster SDCARD access, improving SDCARD menus and reducing latency

* Update u8g_dev_st7920_128_64_sw_spi.cpp

* Disabling EEPROM over FLASH emulatiion if an I2C or SPI EEPROM is present
 2017-12-12 17:51:36 -06:00
victorpv
084f2434a7
Update readme.md 2017-12-11 23:14:13 -06:00
victorpv
7c7ae5ebef
Delete duplicated file. 2017-12-11 23:10:44 -06:00
victorpv
4feffca178
fix for issue #8585 
As reported in this issue:
https://github.com/MarlinFirmware/Marlin/issues/8585
I have it working fine in my local copy like that change.
 2017-12-11 23:07:39 -06:00
Scott Lahteine
d568e586b7 Fix up ubl_motion indentation 2017-12-11 03:08:45 -06:00
Scott Lahteine
24f9bec6f4 UBL + DUAL_X_CARRIAGE compatibility 2017-12-11 03:08:18 -06:00
Scott Lahteine
6d0678d963 Omit unused UBL motion code 2017-12-11 03:08:18 -06:00
Scott Lahteine
3255712343 Skew Correction for UBL 
Also remove unused grid slicing function when using UBL segmented.
 2017-12-11 03:08:15 -06:00
Scott Lahteine
3d796d8040 Move debug code 2017-12-11 00:27:06 -06:00
Scott Lahteine
3db5303bfe _buffer_line => buffer_segment 2017-12-11 00:27:06 -06:00
Scott Lahteine
a71d2f3f40 UBL_DELTA => UBL_SEGMENTED 2017-12-11 00:27:06 -06:00
Scott Lahteine
73e32925e4 References are better for array args 2017-12-11 00:27:06 -06:00
Scott Lahteine
125c572d97 Tweak M114 detail 2017-12-11 00:27:06 -06:00
victorpv
a5150c83a2 [2.0.x] Multiple updates to STM32F1 HAL (#8733) 
* STM32F1 HAL

Adding files for STM32F1 HAL based on libmaple/stm32duino core.
Current persistent_store uses cardreader changes to be sent in separate
commit, but could be changed to use i2c eeprom.
There is another persistent_store implementation that uses the MCU flash memory
to emulate eeprom
Adding readme with some information about the stm32 HAL.

* Switch to Timer4 to avoid a hard reset on STM32F103C6 boards

On bluepill STM32F103C6 boards, using Timer5 results in a error() vector call. Switch to 4 since these are both general purpose, 16 bit timers.

* Add support for EEPROM emulation using Flash

Some low end machines doe not have EEPROM support. Simulate it using the last two pages of flash. Flash does not allow rewrite between erases, so skip writing the working version if that's enabled.

* Basic Pins for a malyan M200

This is a work in progress to go hand in hand with the STM32 work.

* Add support for ADC with DMA. This work has exposed a problem with the pin enumerations in STM boards vs what marlin expects (i.e, try defining PA0 as a temp pin). The hack can be removed with we go to fastio completely. To see this work, set something in adc_pins to a value like PA0 and connect your pullup resistor'd thermistor.

* Missing file - change HAL_adc_init to actually do something

We have an actual ADC init function now.

* Remove pinmode hack

Remove the pin mode hack that I was using to init PA0.

Updated Readme.md

* Several changes to timers and GPIO

Faster GPIO, and faster timer functions by accesing registers and
libmaple.
Still more changes pending for the Timer's code to skip using the
HardwareTimer class altogether.

Switch all enums to be within #defines

This change allows a user to have, for instance, TEMP_4 and TEMP_BED definied but nothing else. The enums which are not defined move "out", allowing the first ones to take the slots in the enum, and since the array is sized on ADC_PIN_COUNT, we always have the right size data and in order.

* Update Malyan M200 pins

Update Malyan M200 pins with correct fan values.

* Test all pins on actual hardware, update definitions

Some of the pin definitions were from knowlege base/pdfs. Now they've been tested against actual hardware. This should be very close to final.

* Update HAL_timers_Stm32f1.cpp

* Add sample configurations for Malyan M200

Add sample configuration for Malyan M200 without bed leveling, and move fan to auto cool E0 since this printer by default has only one fan.


Choose the timer based on MCU defintion. Timer5 is not valid on C8/CB class boards, so use Timer4 for the step timer.


readme.md update

* Updates to timers, and some stm32 boards definitiions

* Correct pin toggle macro.

* Remove duplicated Malyan M200 entry from pins.h

* Update configuration_store.cpp

* Formatting, indentation

* Formatting in HAL_Stm32f1.cpp
 2017-12-10 23:12:45 -06:00
Scott Lahteine
204199e1ce Only compare XYZ to check motion 2017-12-10 23:00:00 -06:00
Scott Lahteine
6686d937fb Always report position on config load/reset 2017-12-10 21:47:14 -06:00
Scott Lahteine
117fc872a7 Update current position in M852 2017-12-10 21:39:49 -06:00
Scott Lahteine
7d2e850577 Have M420 report a changed position 2017-12-10 21:39:49 -06:00
Scott Lahteine
03ba79f144 Sync and report changed position 2017-12-10 21:39:49 -06:00
Scott Lahteine
5cf6a062e3 Reset timer count before first block step 2017-12-10 18:38:53 -06:00
Scott Lahteine
6149b82119 Allow setting current timer counter 2017-12-10 18:38:53 -06:00
Scott Lahteine
82ef6b5242 Add an option to specify "pulse" timer 2017-12-10 18:38:53 -06:00
Scott Lahteine
b8bc965414 General cleanup HAL timers 2017-12-10 18:38:52 -06:00
Scott Lahteine
69d49a2438 Shorter segments may be better 2017-12-09 06:29:14 -06:00
Scott Lahteine
d576f5408e Add MiniRAMBo 1.0a board 2017-12-08 23:42:16 -06:00
Scott Lahteine
c40cb52342 Use MB() for Megatronics 3.1 2017-12-08 23:42:16 -06:00
Scott Lahteine
4fa65a5c25 TCNT0 => HAL_timer_get_current_count 
Fix #8710
 2017-12-08 22:35:28 -06:00
AnHardt
b3daf6b5db [2.0.x] better reverse pass (#8722) 
* repair reverse_pass()

And make it readeble.
This was broken a long time ago.
Not competely unfunctional but far from optimal.

* Minor speedup when calling calculate_trapezoid_for_block

2 float / to 1 foat / and 2 float *

* Various style changes
 2017-12-08 21:38:45 -06:00
Roxy-3D
f58eb391aa [2.0.0] Better off mesh behavior for UBL (#8714) 
* Better off mesh behaviour for UBL

* Suggested ubl.h changes
 2017-12-08 19:00:59 -06:00
Jonathan Barchi
cffd052fee [2.0.x] Fix for #8604 (#8717) 
* Nozzle.cpp: replace incorrect M_2_PI (2/pi) with 2.0 * M_PI

* Use RADIANS(360) instead of 2 * M_PI
 2017-12-08 18:50:05 -06:00
Bob-the-Kuhn
65d0f32f82 divide only when required 2017-12-08 18:14:27 -06:00
Scott Lahteine
728acf521c Followup to #8706 2017-12-08 03:49:33 -06:00
Scott Lahteine
85c6ffbe0d Discard all "continued" blocks on interrupted move 2017-12-08 02:32:58 -06:00
Scott Lahteine
4e891e9fb7 Followup to #8698 2017-12-08 01:01:12 -06:00
Scott Lahteine
de3d3b9cb1 Put FORCE_INLINE before static 2017-12-08 00:46:22 -06:00
Scott Lahteine
43ea265b78
Merge pull request #8685 from MateuszKrawczuk/patch-3 
Update TEMP_BED_PIN in MIGHTYBOARD_REVE
 2017-12-07 21:50:35 -06:00
Scott Lahteine
ae663a4198 PROBE_DOUBLE_TOUCH => MULTIPLE_PROBING 2017-12-07 16:44:13 -06:00
Scott Lahteine
d7800e7975 Apply MULTIPLE_PROBING to example configs 2017-12-07 16:44:12 -06:00
Scott Lahteine
542efda7db
Merge pull request #8698 from thinkyhead/bf2_replace_jerk_code 
[2.0.x] Improved Core-compatible jerk code
 2017-12-07 00:17:00 -06:00
Scott Lahteine
3cd7659924 Improved Core-compatible jerk code 2017-12-06 23:57:57 -06:00
GMagician
99fcf60977 [2.x] addressing #8644 
Removed missing include file
 2017-12-06 23:49:30 -06:00
Scott Lahteine
81c0a918af feed_factor => inverse_secs 2017-12-06 23:03:33 -06:00
Scott Lahteine
f206b81cf7 Sanity check skew+UBL 2017-12-06 22:56:58 -06:00
Scott Lahteine
9898b96992 No lcd_map_control flag in quick_stop 2017-12-06 22:23:34 -06:00
Scott Lahteine
840289e7cc Use block cleaning instead of split flag 2017-12-06 22:22:58 -06:00
Scott Lahteine
90cf6a06be Simplify G26 user_canceled 2017-12-06 22:02:54 -06:00
Scott Lahteine
cdfabbc507 Shorten error text in G29 2017-12-06 21:50:54 -06:00
Scott Lahteine
c846388a65 Standardize LCD interface code for UBL a little 2017-12-06 21:50:54 -06:00
Scott Lahteine
2fde60da12 Changes for parity with 1.1.x 2017-12-06 21:50:54 -06:00
Scott Lahteine
6040d4080e Cleanup stepper ISR. Allow cleaning for endstops. 2017-12-06 21:23:37 -06:00
Scott Lahteine
a4e1d83599 Fix M503 S parameter 2017-12-06 21:23:37 -06:00
Scott Lahteine
a3b098b4be Whitespace clean 2017-12-06 14:02:44 -06:00
AnHardt
a993c5227d Don't split first_move while homing or probing 
While homing or probing it might be bad if the stop/trobe triggers during the first part and the second is still in the buffer.
 2017-12-06 14:13:05 +01:00
Mateusz Krawczuk
5320906b0b
Update TEMP_BED_PIN in MIGHTYBOARD_REVE 
Pin K7 number in fastio1280.h is 69, but it's also ADC15 pin. 
To get correct value from ADC reading it should be set as 15.
 2017-12-06 12:07:20 +01:00
Scott Lahteine
aeb5c623c1 Show "Level Bed Corners" with UBL too 
Addressing #8676
 2017-12-05 21:58:43 -06:00
Scott Lahteine
5fbb2f121e Remove skew warning that could crash the planner 2017-12-05 20:27:20 -06:00
Richard Wackerbarth
c1184552ac Change K1 to required option PID_K1 2017-12-05 19:59:59 -06:00
revilor
9e3fbcf35c fix for #8669 (#8679) 
* fix for #8669

* Update G28.cpp
 2017-12-05 19:40:36 -06:00
Scott Lahteine
d8b444c144 Cleanup constextpr in planner.cpp 2017-12-05 18:55:57 -06:00
Scott Lahteine
a2372cfab5 Fix SKEW_CORRECTION without leveling 2017-12-05 18:48:34 -06:00
Scott Lahteine
4d3c3d0b73 Some ST7920 parity with 1.1.x 
Possibly more should be brought over? Discussion at #8471
 2017-12-05 02:22:36 -06:00
Scott Lahteine
3748c28924 Fix MBL G29 without LCD 
Addressing https://github.com/MarlinFirmware/Marlin/pull/8575#discussion_r154536617
 2017-12-05 01:57:45 -06:00
Scott Lahteine
772298257b Creality pins spacing, MINIPANEL CS pin 2017-12-05 01:57:45 -06:00
Scott Lahteine
b27bc67271 Set initial endstops state 2017-12-05 01:10:31 -06:00
Scott Lahteine
b6ba32ce75 Support for RAMPS Plus (3DYMY) 2017-12-05 00:42:21 -06:00
Scott Lahteine
53694ebaa1 Folllwup to planner splitting 2017-12-04 18:55:23 -06:00
Scott Lahteine
37fff608b0
Merge pull request #8652 from fiveangle/bf2_usbcon_xonxoff 
[2.0.x] SERIAL_XON_XOFF not supported on USB-native AVR devices
 2017-12-04 16:46:18 -06:00
Scott Lahteine
4b612f590c Split first move to planner for better chaining 2017-12-04 15:27:47 -06:00
Unknown
91b63f6d69 SERIAL_XON_XOFF not supported on USB-native AVR devices 
User could enable SERIAL_XON_XOFF on USB-native devices and it would not be enabled without warning, but M115 would report the capability as available.
 2017-12-04 03:57:01 -08:00
Bob-the-Kuhn
57fac33a74 add explanations 
1) add explanations as to why software SPIs are selected

2) remove unused flag/option
 2017-12-03 20:32:22 -06:00
Bob-the-Kuhn
bb23286383 add README & modify spi_pins.h 
still trying to fix file name
 2017-12-03 20:00:56 -06:00
Scott Lahteine
dd8febca1a Revert "Merge pull request #8611 from thinkyhead/bf2_planner_split_first" 
This reverts commit 824980e70e, reversing
changes made to aa7efb96bf.
 2017-12-03 17:50:19 -06:00
Bob-the-Kuhn
fb44f8e50f
Merge pull request #8616 from hg42/bugfix-2.0.x 
[2.0.x][LPC1768][FIX] NUM_DIGITAL_PINS was negative, fixes PWM, arduino io functions, M42, M43, M226, probably also Servo, some LCD, soft spi, SoftwareSerial, ... may be others
 2017-12-03 14:48:00 -06:00
Bob-the-Kuhn
4c5356f77a
Merge pull request #8622 from hg42/implement-LPC1768-GET_TIMER 
[2.0.x][LPC1768][fix] Implement GET_TIMER and other GET_xxx, fixes PWM
 2017-12-03 14:46:22 -06:00
Harald Gutsche
f5b4e1ef4f as a workaround enable PWM for any pin, see PR #8622 2017-12-03 20:37:02 +01:00
Scott Lahteine
6e944a413c
Merge pull request #8607 from benlye/patch-1 
[2.0.x] Fix M49 so that it does not hang the terminal console
 2017-12-03 03:41:33 -06:00
Scott Lahteine
967522b95e
Merge pull request #8615 from dot-bob/Duplicator_6-2.0.x 
[2.0.x] Example configurations for Wanhao Duplicator 6
 2017-12-03 03:37:48 -06:00
Scott Lahteine
f4b16a3bac
Update M49.cpp 2017-12-03 03:34:56 -06:00
Scott Lahteine
f9327534f8
Merge pull request #8634 from fiveangle/bf2_report_xonxoff 
[2.0.x] Report SERIAL_XON_XOFF in M115
 2017-12-03 02:18:50 -06:00
Scott Lahteine
da9f140829
Merge pull request #8637 from thinkyhead/bf2_ubl_uses_LSL 
[2.0.x] Use custom segment length for UBL Cartesian
 2017-12-03 01:57:49 -06:00
Scott Lahteine
3a97de52ef Split first move to planner for better chaining 
Address #8573, #8595
 2017-12-03 01:27:14 -06:00
Scott Lahteine
24437de591 Use custom segment length for UBL Cartesian 2017-12-03 00:10:54 -06:00
Unknown
4c5ffd2349 [2.0.x] Report SERIAL_XON_XOFF in M115 
-Report SERIAL_XON_XOFF in Extended Capabilites M115 report for hosts
-Remove outdated 256 size limitation from comments on RX_BUFFER_SIZE defines
-Update error message conditions
 2017-12-02 21:08:06 -08:00
Scott Lahteine
aa7efb96bf Bring configurations up to date 2017-12-02 21:50:51 -06:00
Scott Lahteine
63a91cd37a Fix a homing comment 2017-12-02 21:02:37 -06:00
Scott Lahteine
8056120195 Rename inverse_mm_s => inverse_secs 2017-12-02 20:28:09 -06:00
Scott Lahteine
23557f8e77 Remove obsolete de_float 2017-12-02 20:23:10 -06:00
Jonathan Barchi
05f8e98c4a Fix for issue #8629 - mismatch between number of stored and loaded dummy items on non-delta machines. (#8631) 2017-12-02 19:04:58 -06:00
Roxy-3D
48fb4e0932
Get Bi-Linear to work with G26 
More corrections to make that happen...
 2017-12-02 14:14:24 -06:00
Roxy-3D
0850b38b45
Get Bi-Linear working with G26 
G26 uses logic that looks like:
```
ex = _GET_MESH_X(i + 1) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS));
```
The Bi-Linear macros need parenthesis to work correctly.
 2017-12-02 14:10:30 -06:00
Scott Lahteine
000b3b3117 Comment/cleanup of motion code 2017-12-02 01:09:55 -06:00
Scott Lahteine
046a1ad331
Merge pull request #8625 from tcm0116/2.0.x-G33 
[2.0.x] Fix missing return values in G33_auto_tune
 2017-12-02 00:51:19 -06:00
Thomas Moore
b35c3b5eb8 Fix missing return values in G33_auto_tune 2017-12-01 21:29:16 -06:00
Scott Lahteine
45c2388a58 Apply const to thermal_runaway_protection args 2017-12-01 19:42:44 -06:00
Scott Lahteine
0154e3480c New feature: BED_SKEW_CORRECTION 2017-12-01 19:39:49 -06:00
Scott Lahteine
082ab8fcab Add SKEW_CORRECTION to example configs 2017-12-01 19:22:27 -06:00
Unknown
d1f11e9c10 fix missing GET_TIMER (used by PWM for Ex_AUTO_FAN) 2017-12-01 22:28:55 +01:00
Harald Gutsche
dd1b503f64 fix NUM_DIGITAL_PINS being negative for more than 127 digital pins 2017-12-01 07:39:46 +01:00
dot-bob
bd45d0363d Add default configurations for the Wanhao Duplicator 6. 2017-11-30 23:24:33 -07:00
Scott Lahteine
91fb6231b2 Fix EEPROM V45 header, layout 2017-11-30 22:45:17 -06:00
Roxy-3D
94e6b2976e
Restore correct G26 values for gMax 1.5+ printer 2017-11-30 18:12:17 -06:00
Scott Lahteine
dd3ce40826 Drop Planner::position_float, use int types 2017-11-30 17:43:31 -06:00
Scott Lahteine
ec6ca37ed3 Fix (un)apply_leveling fade bug 2017-11-30 17:25:44 -06:00
Scott Lahteine
a52fec6ac4 Planner class parity with 1.1.x 2017-11-30 15:55:08 -06:00
Ben Lye
1f3ad461bc
Update M49.cpp 
Fix M49 so that it does not hang the terminal console.
 2017-11-30 20:17:44 +00:00
Scott Lahteine
e37dd64548 Apply LEDColor, language fixes 2017-11-29 23:58:12 -06:00
Scott Lahteine
8f90642eea LED_CONTROL_MENU config changes 2017-11-29 21:02:56 -06:00
Tannoo
cf0f78336b New Feature: LED_CONTROL_MENU 2017-11-29 21:02:55 -06:00
Scott Lahteine
23e45fa3c4 Apply const to some planner vars 2017-11-29 21:02:55 -06:00
Scott Lahteine
7c61bcb058 Apply SEGMENT_LEVELED_MOVES to example configs 2017-11-29 16:57:31 -06:00
Scott Lahteine
ef2531558c Add an option to segment leveled moves 2017-11-29 16:57:30 -06:00
Scott Lahteine
285b868e9b Tweak planner code style 2017-11-29 15:22:18 -06:00
Scott Lahteine
1f2acc33bc Tweaks for check_axes_activity 2017-11-28 18:41:13 -06:00
Vitaliy Sapyanov
7f88334aa3 Done cleanup and removed duplicates in pins_RuRAMPS4D.h (#8582) 
Remove duplicates, with followup fixes
 2017-11-28 18:33:12 -06:00
Scott Lahteine
a8aa43ce2d
Merge pull request #8587 from AnHardt/2_Fix_WDTO_during_long_DELTA_moves 
[2.0.x] Fix WDTO during long delta moves
 2017-11-28 17:29:18 -06:00
Scott Lahteine
4793c34c53 Fix M290 boolval bug 
Fix #8577
 2017-11-28 17:21:33 -06:00
Scott Lahteine
16baa48699 Fix #8579 
Fan speed code fell into a curly brace
 2017-11-28 16:12:14 -06:00
AnHardt
02aa93a6ad Fix Watchdog time out during long lasting DELTA moves 
During long lasting moves of a delta machine neither the temperatures are maintained nor buttons checked nor ... .
The fix is to call 'manage_heater()' and 'idle()' every now and then in the loop where the move is segmented. 
The code is abot the same as in G2_G3 wher we had the same problem with too large circles lasting too long.
Fixing #7510
 2017-11-28 17:03:51 +01:00
Scott Lahteine
fadf9eb2d7 Simplify midpos calculation 2017-11-27 14:00:35 -06:00
Scott Lahteine
0880031e8e Satisfy M702 dependencies 2017-11-27 13:39:59 -06:00
Scott Lahteine
0786b61ce7 Followup to #8575 2017-11-27 12:58:40 -06:00
Scott Lahteine
276271e72f Make MBL work more like PROBE_MANUALLY 2017-11-27 02:12:29 -06:00
Scott Lahteine
94cb412e45 Allow override of probe bounds 2017-11-26 20:55:27 -06:00
Scott Lahteine
c8718aa111 Spacing, macros in LPC1768_PWM 2017-11-26 20:20:05 -06:00
Scott Lahteine
a67cf78c6b Clean up whitespace, spacing 2017-11-26 20:18:52 -06:00
Scott Lahteine
f0dd4e3fa0 Bootscreen parity with 1.1.x 2017-11-26 20:07:17 -06:00
Scott Lahteine
b634bfe1b1 Tweak to readDir code 2017-11-26 18:25:00 -06:00
Scott Lahteine
7be4857ab9 Tweak BLOCK_BUFFER_SIZE description 2017-11-26 17:36:40 -06:00
Bob-the-Kuhn
7d8b66e207
Merge pull request #8570 from Bob-the-Kuhn/Sbase-PWM 
[2.0.x] MKS Sbase - add servo pin definitions and add directly controlled PWM
 2017-11-26 09:36:18 -06:00
Bob-the-Kuhn
59b32c25b5 MKS Sbase changes 2017-11-26 07:47:06 -06:00
Scott Lahteine
f90c075d1f SD Menu patches 2017-11-26 01:14:18 -06:00
Scott Lahteine
9b64be0bc5 Fixes for leveling sub-menus 2017-11-26 00:05:36 -06:00
Scott Lahteine
25674da90c Tweaks to do_blocking_move 2017-11-25 23:31:16 -06:00
Scott Lahteine
22b897e77d Show M211 output with workspace offset 2017-11-25 20:48:20 -06:00
Scott Lahteine
d06e29846d Loosen HAS_BED_PROBE definition 2017-11-25 20:11:21 -06:00
Roxy-3D
e48fcad615 change G26 and G29 bit function names to avoid HAL collision 2017-11-25 19:58:45 -06:00
Scott Lahteine
41ec449960 Fix G26 error return 2017-11-25 19:53:14 -06:00
Scott Lahteine
9badf5dc0d Fix Micromake C1 config 2017-11-25 18:41:07 -06:00
Scott Lahteine
7576ad7fc2
Merge pull request #8554 from tcm0116/2.0.x-cleanup 
[2.0.x] Fix for #8525 and other cleanup
 2017-11-25 18:19:54 -06:00
Scott Lahteine
27c5692b13 Syntax tweaks 2017-11-25 18:13:36 -06:00
Scott Lahteine
d18d40e1d6 M290 report on change, P0 to leave Probe Z Offset alone 2017-11-25 16:47:39 -06:00
LVD-AC
65f365333f [2.0.x] G33 probe error handling 2017-11-25 16:19:10 -06:00
Bob-the-Kuhn
8c69adba8b
Merge pull request #8553 from Bob-the-Kuhn/2.0.x-U8Glib-follow-up 
[2.0.X] U8Glib follow up
 2017-11-25 14:26:32 -06:00
Scott Lahteine
be00e421a7 Patch up M290, M851 2017-11-25 14:11:57 -06:00
Bob-the-Kuhn
fc40d56131 fixed error, updated defaults, added notes 
Travis fix - only allow ultralcd_st7920_u8glib_rrd_AVR.cpp to compile when ST7920 selected
 2017-11-25 12:35:03 -06:00
Roxy-3D
d29cb646e3
Fix erroneous reference to temperature in time calculations 
Travis is having problems at:  https://github.com/MarlinFirmware/Marlin/pull/8560   

So...   doing a direct commit to get things correct.   Bugfix_v1.1.x does not have this bug.  Nothing needs to be done to that branch.
 2017-11-25 10:40:56 -06:00
Thomas Moore
7bb1721f35 Fix _BV already defined warnings for Teensy 2017-11-24 22:34:39 -06:00
Thomas Moore
5f9592a523 Cleanup narrowing warning in pin_is_protected 2017-11-24 22:15:56 -06:00
Thomas Moore
34eaaab5fb Fix _BV already defined warnings 2017-11-24 21:59:31 -06:00
Thomas Moore
2ea779e560 Allow bed probe sanity checks to run 2017-11-24 21:59:01 -06:00
Scott Lahteine
d24b1190bd Don't use Z_MIN_PROBE_ENDSTOP on DELTA 2017-11-24 18:24:22 -06:00
Scott Lahteine
e34c6827ea Init MIXING virtual tools as switching 2017-11-24 18:02:09 -06:00
Scott Lahteine
a9ecb975b2 Apply LINEAR_UNIT to M503 output for M200 2017-11-24 17:32:48 -06:00
Scott Lahteine
d95ee0f003
Merge pull request #8551 from revilor/bugfix-2.0.x 
MK2_MULTIPLEXER does not require E2/E3 stepper pins
 2017-11-24 17:16:23 -06:00
Scott Lahteine
80ada58818 One fewer function call in probe_pt 2017-11-24 17:10:38 -06:00
oliver
92a0dc552a MK2_MULTIPLEXER does not require E2/E3 stepper pins 2017-11-24 23:56:39 +01:00
Scott Lahteine
b49acce035 Tweaks for lcd_external_control 2017-11-24 15:53:25 -06:00
Scott Lahteine
1ef1052ae1 Phatter arrows for Z offset overlay 2017-11-24 15:53:25 -06:00
Scott Lahteine
5926c9c97b Followup for MESH_EDIT_GFX_OVERLAY 2017-11-24 15:53:25 -06:00
Scott Lahteine
ab03a31cc9 Patch G0/G1 for NANODLP_Z_SYNC 2017-11-24 14:11:12 -06:00
Scott Lahteine
a766dfb3b1
Merge pull request #8536 from thinkyhead/bf2_nanodlp_z_move_sync 
[2.0.x] Implement NANODLP_Z_SYNC for 2.0.x
 2017-11-24 13:11:14 -06:00
Scott Lahteine
01e207213f Fix MK2_MULTIPLEXER stepper indirection 2017-11-24 12:49:28 -06:00
Roxy-3D
ec04cf27d3
Fix the G26 out of scope identifiers in the v2.0.0 branch (#8543) 
These changes may need to be warmed over.  I tried to fix things with
the least amount of disruption.   I just wanted to get the bugfix_v2.0.0
branch working for people again.
 2017-11-24 10:39:56 -06:00
Scott Lahteine
dc82babe8e Implement NANODLP_Z_SYNC for 2.0.x 2017-11-24 00:28:06 -06:00
Scott Lahteine
c6b0c104bb Adapt G26 to work for all meshes 2017-11-23 22:31:37 -06:00
Scott Lahteine
5ce7f23afa Config option G26_MESH_VALIDATION for all meshes 2017-11-23 21:43:23 -06:00
Scott Lahteine
c19eb33408 Move G26 to gcode sub-folder 2017-11-23 21:43:23 -06:00
Scott Lahteine
a03f93bab4 Fix fan kickstart 2017-11-23 21:42:45 -06:00
Scott Lahteine
9e3c41f9e8 Tweak fan kickstart / speed code 2017-11-23 15:20:35 -06:00
GMagician
118ac61e59 [2.0.x] Tool change bad behaviour fix 
Previous fix did not work as expected when axeis not homed. It raise Z but never return to original position
 2017-11-22 20:24:03 -06:00
Scott Lahteine
c35d27f77c
Merge pull request #8299 from tcm0116/2.0.x-BIQU_BQ111-A4 
[2.0.x] Add BIQU BQ111-A4 board
 2017-11-22 19:16:04 -06:00
Scott Lahteine
1685cd193b Tweak char_mode init 2017-11-22 19:12:08 -06:00
Scott Lahteine
9406c87a97 Fix up LCD init / charset 2017-11-22 18:22:55 -06:00
Thomas Moore
fa577392b2 Add BIQU BQ111-A4 board 2017-11-22 16:34:59 -06:00
Scott Lahteine
c2fc78c3a8 #ifndef => #if !PIN_EXISTS 2017-11-22 16:28:52 -06:00
Scott Lahteine
c613a1ed38 Fix indentation, stepper.h dependency, etc. 2017-11-22 14:55:30 -06:00
teemuatlut
f011a32771 Board definitions for Ultratronics Pro v1.0 2017-11-22 14:55:24 -06:00
Bob-the-Kuhn
9dad534f02 fixed 2017-11-21 21:37:20 -06:00
Scott Lahteine
4371345cbe
Don't re-init graphical LCD after boot screen 
Followup to 13a3fb1acc
 2017-11-21 18:23:39 -06:00
Scott Lahteine
56c02b7f59 Shift register buttons question 
Can LCD shift registers keep up with faster MCUs?
 2017-11-21 16:12:40 -06:00
Scott Lahteine
3994d3b935 General cosmetic LCD 2017-11-21 16:12:40 -06:00
Scott Lahteine
617993d0ea Patch for !!TEST (was _BV once?) 2017-11-21 16:12:08 -06:00
Scott Lahteine
3269d8dd62 Tweak M42 var 2017-11-21 16:12:08 -06:00
Mateusz Krawczuk
bb1a6eea88
Remove pin count check for MIGTHYBOARD_REVE 
Remove assert and unused code since it is implemented in pinsDebug_plus_70.h
 2017-11-21 14:38:02 +01:00
Scott Lahteine
1ce0fb336b Patch Max7219_LED_Set input args 2017-11-20 21:15:15 -06:00
GMagician
a61127a421 [2.0.x] tool change bad behaviours 
This will solve 2 issues on tool change.
1) when no home is done ("no_move" is set) tool change should never move X & Y because... I don't know where I am...only Z should be adjusted to avoid bed collision if other nozzle is lower than current.
Since no move no bed level matrix should be applied
2) When SWITCHING_NOZZLE is enabled and system is homed there are two movements to go to destination, but first can move Z to older position and then crash on the bed
 2017-11-20 16:34:55 -06:00
Vitaliy Sapyanov
e2724c68ab Update pins_RURAMPS4D.h 
Add and bugfix pins
 2017-11-20 15:36:13 -06:00
Scott Lahteine
9770062309
Merge pull request #8463 from thinkyhead/bf2_32bit_M42 
[2.0.x] Updates to Anet A8 configurations
 2017-11-20 15:12:30 -06:00
Scott Lahteine
3066655727 Try port*100+pin, fix config dependency 2017-11-20 13:58:23 -06:00
Scott Lahteine
ba8bc7ea80 Cosmetic tweaks 2017-11-20 13:58:02 -06:00
Scott Lahteine
f409147116 Fix P2_04, P2_05 2017-11-20 13:58:02 -06:00
Bob-the-Kuhn
a28ccabe2a M42 P1.20 fix 2017-11-20 13:58:02 -06:00
Unknown
33912fa7e8 Update Temperature::setPwmFrequency prototype to match source 
Introduced with #8446
 2017-11-20 01:50:41 -08:00
Scott Lahteine
b9327a4d16 Misc. general cleanup 2017-11-19 15:43:39 -06:00
Scott Lahteine
8836623e0f Fix sq/min/max macros after platform headers 2017-11-19 15:43:39 -06:00
Scott Lahteine
fe4f009fdd 32-bit unless… 2017-11-19 15:43:38 -06:00
Scott Lahteine
25af9decfe Remove enum.h include of MarlinConfig.h 2017-11-19 15:43:38 -06:00
Scott Lahteine
1d4571b88d Dependency adjustments 2017-11-19 15:43:38 -06:00
Scott Lahteine
550f1025f0 Try using <Arduino.h> everywhere 2017-11-19 14:23:02 -06:00
Scott Lahteine
c0000a0cdc Move servo code to modules/servo.* 2017-11-19 14:23:02 -06:00
Scott Lahteine
81bc428b48 Don't compile custom u8g without DOGLCD 2017-11-19 13:58:38 -06:00
Bob-the-Kuhn
c14000775b PWM fixes, slow down fan update 
include LPC1768 syntax for M42

couple more pin_t changes

consistency

change M42 to R, P format

Revert "change M42 to R, P format"

This reverts commit 01f12f579ec9ccc1bb9126e68d2c86449e9b7edf.
 2017-11-18 07:05:50 -06:00
Scott Lahteine
60adc6ff02 Display filwidth ratio in terms of E mm 2017-11-18 07:01:49 -06:00
Scott Lahteine
6e533748eb Fixes #8472 2017-11-18 05:15:55 -06:00
Scott Lahteine
485abb023b
Merge pull request #8456 from thinkyhead/bf2_wednesday_tweaks 
[2.0] No retroactive adjustment with M851 Z
 2017-11-18 04:49:53 -06:00
Scott Lahteine
3bba7d60f3 No retroactive changes with M851 Z 
If using babystep to adjust the Z probe offset, the axis will move and the mesh will be updated at the same time, causing a doubling of the Z offset over the rest of the print.

To correct for this, the current Z position would need to be modified in the opposite direction, canceling out the additional Z offset added to the mesh. This would be confusing to users, and moreover it would not be accurate without also taking the current Z fade level and current Z height into account.

It might make sense to change the mesh in the case where no babystepping is taking place, but this could be considered an undesirable side-effect of changing the `zprobe_zoffset`.

One way to remedy this would be to return to storing the mesh with `zprobe_zoffset` included, then subtracting `zprobe_zoffset` from the returned Z value. Thus, a babystep moving the Z axis up 1mm would subtract 1 from `zprobe_zoffset` while adding 1 to all mesh Z values.

Without including the `zprobe_zoffset` in the `z_values` there is no safe way to alter the mesh in conjunction with babystepping, although it's fine without it.
 2017-11-18 03:36:39 -06:00
Scott Lahteine
32512332df Apply some formatting 2017-11-18 03:12:30 -06:00
Scott Lahteine
7dacc999b9 Remove obsolete show_bootscreen var 2017-11-17 17:01:43 -06:00
Roxy-3D
9729528d13
Update UBL's Delta Probable locations 
This is a non-intuitive change.   @oldmcg says in this post https://github.com/MarlinFirmware/Marlin/issues/7572#issuecomment-340641207 that using DELTA_PRINTABLE_RADIUS is better than DELTA_PROBABLE_RADIUS for setting the probe limits.   This is because the automatic probe code checks all locations for being reachable by the probe prior to doing the probe.
 2017-11-17 16:44:57 -06:00
Scott Lahteine
d48cb6bf41 Apply coding standards to Max7219 2017-11-17 15:32:21 -06:00
Scott Lahteine
bd8bcf06e7 Updates to Anet A8 configurations 
Based on #8426
 2017-11-16 23:19:36 -06:00
Bob-the-Kuhn
7eea000f4b E0 auto fan fixes 2017-11-16 18:42:56 -06:00
Scott Lahteine
b2dda096fe Fix FILAMENT_LCD_DISPLAY for disabled state 2017-11-16 16:57:48 -06:00
Scott Lahteine
1e8afb66b7 Fix a planner comment 2017-11-16 16:57:47 -06:00
Scott Lahteine
50f09cc029 Miscellaneous cleanup 2017-11-16 00:47:16 -06:00
Scott Lahteine
63257dc083 Fix M503 output for M145 
Fixes #7978
 2017-11-15 04:00:18 -06:00
Scott Lahteine
0918dae66e Add OV() macro for use in thermistor tables 2017-11-15 03:15:18 -06:00
Scott Lahteine
24057270a3
Merge pull request #8420 from RowanMeara/rm-dithering-2.0.x 
[2.0.x] Fix Software Fan PWM
 2017-11-15 02:30:19 -06:00
Scott Lahteine
5079a02c90 Add HAL_SERVO_LIB to HAL_Due.h 2017-11-15 02:07:01 -06:00
Scott Lahteine
9c3761047e
Merge pull request #8434 from thinkyhead/bf2_fix_M32_subroutines 
[2.0] Fix 'M32 P' subroutines
 2017-11-15 01:15:02 -06:00
Scott Lahteine
e0d367f1fb Fix M32 P subroutine handling 2017-11-15 00:44:21 -06:00
Scott Lahteine
9f8b4c5ee8 Patch SD lib files for readability 2017-11-15 00:44:21 -06:00
Scott Lahteine
2c8c30437e Fix parser parameter value handling 2017-11-14 23:20:33 -06:00
RowanMeara
6131533157 Change dithering behavior to intended. 2017-11-14 00:47:07 -08:00
Scott Lahteine
e70b44dc0b Make sure leveled[] is defined for later use 2017-11-14 02:13:38 -06:00
Scott Lahteine
54774841ba
Merge pull request #8416 from thinkyhead/bf2_M114_DETAIL 
[2.0] Add M114_DETAIL to Configuration_adv.h
 2017-11-14 00:28:55 -06:00
Scott Lahteine
009e3a7aa7 Add M114_DETAIL to Configuration_adv.h 2017-11-14 00:03:17 -06:00
Scott Lahteine
6d6c3b1e97 Fix up REPRAPWORLD_KEYPAD defines 2017-11-13 22:14:54 -06:00
Scott Lahteine
3f0a982b8c Move Filament Width Sensor to Configuration_adv.h 2017-11-13 21:05:57 -06:00
Scott Lahteine
b76e173205 Move test extrusion options under G26 2017-11-13 21:05:57 -06:00
Scott Lahteine
14ebedca27 Drop unused LARGE_FLASH option 2017-11-13 15:44:24 -06:00
Scott Lahteine
b7feb53e8a Support for Extrudrboard in Printrboard Rev.F 2017-11-13 15:44:23 -06:00
Scott Lahteine
91baca6abb Patches for compiler warnings/errors 2017-11-13 04:43:47 -06:00
Scott Lahteine
2f73dec077 Apply native workspace fixes for G92, G53-59 2017-11-13 02:09:12 -06:00
Scott Lahteine
04abd8d459 Improve and clarify M428 code 2017-11-13 02:09:11 -06:00
Dave Johnson
c009a990e4 [2.0.x] Fix some 8-bit Teensyduino compile warnings (#8385) 
* Fix some 8-bit Teensyduino compile warnings

-Override Teensyduino legacy NOT_A_PIN 127 define
-some fixups for Printrboard_RevF pins

* Proper cleanup of Printrboard Rev.F pins

* Apply LCD fixes to Printrboard v1
 2017-11-13 01:07:59 -06:00
Scott Lahteine
e8e92f8969 No leveling data in M114 if no leveling is enabled 2017-11-12 23:03:38 -06:00
Scott Lahteine
f5d210c35c Fix report_current_position 2017-11-12 23:02:53 -06:00
Roxy-3D
faaae7a1b2
Provide more clearance for BL-Touch probe 2017-11-12 13:11:22 -06:00
Scott Lahteine
06ee6584fd Remove offsets from soft endstops, tool change 2017-11-11 22:47:38 -06:00
Scott Lahteine
c938273bd5 Coding standard patch of M290 2017-11-11 22:14:21 -06:00
Scott Lahteine
98c1265e3b Disable laser power when PWM goes to 0 2017-11-11 22:00:22 -06:00
Scott Lahteine
d4a1154c25 Use do_blocking_move_to where possible 2017-11-10 20:55:23 -06:00
Scott Lahteine
36426af564
Merge pull request #8356 from tcm0116/2.0.x-M600 
[2.0.x] Normalize load/unload length in M600
 2017-11-10 19:44:08 -06:00
Scott Lahteine
1ed86adf9c Cleanup around updatePID 2017-11-10 19:27:34 -06:00
Scott Lahteine
75a58ee4b8 Fix position_is_reachable bug in waiting 2017-11-10 19:27:33 -06:00
LVD-AC
e334efb2a7 PROBE_MANUALLY etc. 2017-11-10 19:27:33 -06:00
Bob-the-Kuhn
b6415dc169 finish 2017-11-10 14:39:55 -06:00
Scott Lahteine
0efa66be0b Updates to Traditional Chinese 
From @cheton at #8347
 2017-11-10 04:52:20 -06:00
Scott Lahteine
cba9c1cf9e Add pre-calculated planner.e_factor 2017-11-10 03:14:24 -06:00
Thomas Moore
600c85226e Normalize load/unload length in M600 2017-11-10 02:31:46 -06:00
Scott Lahteine
81b91b3f9d Clean up some trailing white-space 2017-11-10 02:31:04 -06:00
Roxy-3D
2f9848ede3
Correct gMax 1.5+ example file 
And...   Keep both branches in synchronization.
 2017-11-09 23:44:14 -06:00
Scott Lahteine
006dad4b52 Add pins_RURAMPS4D.h & change pins.h 
http://3dtoday.ru/blogs/svs0724/ruramps4d-ramps-for-adruino-due-the-pilot-shipment-available-for-zack/
 2017-11-09 21:51:06 -06:00
Scott Lahteine
00514857e9 SBASE serial port -1, RAMPS spacing 2017-11-09 21:41:07 -06:00
Scott Lahteine
c66696c507
Merge pull request #8344 from tcm0116/2.0.x-delta_height 
[2.0.x] Add delta_height variable in lieu of using home_offset
 2017-11-09 01:21:53 -06:00
Scott Lahteine
22e18fe832 Patch _manual_goto_xy for kinematics 2017-11-08 22:21:38 -06:00
Scott Lahteine
0cfb936dd1 Clarify some motion code 2017-11-08 22:15:55 -06:00
Thomas Moore
f34c3597dc Add delta_height variable in lieu of using home_offset 2017-11-08 22:10:08 -06:00
Bob-the-Kuhn
d47fbf791b Arduini IDE compatibility changes 
changed includes to make Arduino IDE happy
 2017-11-08 20:49:49 -06:00
Scott Lahteine
95ea43bde4 Update XYZ dual stepper configurations 2017-11-08 20:31:43 -06:00
Scott Lahteine
b0b4a20930 Tweaks to core motion code 2017-11-08 20:09:09 -06:00
Scott Lahteine
8805e24cc7
Fix tilt_mesh_based_on_probed_grid output bug 2017-11-08 20:06:20 -06:00
Scott Lahteine
24437fbb13
Fix G26 Y argument bug 2017-11-08 19:20:10 -06:00
Scott Lahteine
09b05c9d79
Merge pull request #8321 from Bob-the-Kuhn/pins_re-arm 
2.0.x - pins_RAMPS_RE_ARM.h - add mega2560 pin numbers
 2017-11-08 13:11:13 -06:00
Scott Lahteine
e6788bb6ae Fix get_destination_from_command for E 2017-11-08 12:54:00 -06:00
Roxy-3D
967104e1ce
Default Extrusion Settings were off a few lines in some of the example config files. (#8333) 2017-11-08 11:56:00 -06:00
Bob-the-Kuhn
8875885a15 pins add old names 
fix typo

re-write PWM section, add "not on Re-ARM" list
 2017-11-08 11:11:38 -06:00
Roxy-3D
1c6e83c137
if !HAS_MESH we still need to do some motion! (#8328) 
* if !HAS_MESH we still need to do some motion!

Thank You MagoKimbra !

* Ooops....   need #else and not #elif
 2017-11-08 09:42:21 -06:00
Scott Lahteine
82f45c3e6a Patch G33 misuse of PROBE_MANUALLY 2017-11-08 00:36:06 -06:00
Scott Lahteine
064e6fe60e Remove debugging pin toggle from LCD code 2017-11-07 23:00:54 -06:00
Bob-the-Kuhn
0483a7df91 AVR RRD works 
LPC1768 VIKI2 & RRDFG are working

looks like all SPIs are working

library change

sh1106 locks up

fixed lockup, started I2C SW com

pretty

re-org

restore a few files

make library happy

switched HAL version of rrd

fix travis error

travis error fixes

another travis fix

cleanup

minor update

one more

correct spacing in platformio.ini
 2017-11-07 18:40:29 -06:00
Scott Lahteine
96c9d715f3 Patch abuse of sprintf_P in G33 2017-11-07 17:33:50 -06:00
Roxy-3D
ed62c621d7
Fix G26 Circle Drawing. Add Default Extrusion Settings (#8313) 
- Fix G26 Circle Drawing.
- Add default extrusion settings so machine can print lines on print bed
- Yet to be done: Get LCD Menu's to use these settings.
 2017-11-07 17:13:53 -06:00
Scott Lahteine
8fea26aa9d Fix PID_autotune watch temp increase value 2017-11-07 15:51:48 -06:00
Scott Lahteine
2c099fd4c2 Update Thermal Protection Documentation 2017-11-07 15:46:44 -06:00
Colten Edwards
a6160916b0 [2.0] Fix M48 for delta printers/ABL compile issue (#8286) 
* fix M48 for delta printers

fix M48 for delta printers. home printer if not already homed.

* remove ENABLED(DELTA)

remove ENABLED(DELTA) as it is not needed.

* Update M48.cpp

* abl needs queue.h

without queue.h abl will not compile since there is a script that runs at the end of it and we need to queue it up.
 2017-11-07 15:36:33 -06:00
Scott Lahteine
17ef0a513b Update G92 for native workspace 2017-11-07 13:07:16 -06:00
Scott Lahteine
b4bf8928aa German language updates 
Corresponding to #8306
 2017-11-07 12:10:29 -06:00
Thomas Moore
73ca5345e1 Fix Delta EEPROM 2017-11-07 16:48:21 +00:00
Scott Lahteine
714d2b9bbc
Merge pull request #8297 from thinkyhead/bf2_M118_and_others 
[2.0] Fix M118, compiler warnings, etc.
 2017-11-06 23:25:49 -06:00
Alexey Shvetsov
83555933aa Add platformio support for stm32 (#8246) 
[2.0] Add platformio support for stm32
 2017-11-06 23:03:59 -06:00
Scott Lahteine
85a62bbf46 Misc. fixes to compiler warnings, etc. 2017-11-06 22:57:05 -06:00
Scott Lahteine
e6aba99f16 Fix M118 parameters, with strict guideline 2017-11-06 22:57:01 -06:00
Scott Lahteine
e9b1944a67 Patch non-extended font option 2017-11-06 21:42:21 -06:00
Roxy-3D
6324b09934
Revert "Fix EEPROM crc (#8284)" (#8292) 
This reverts commit 172c36f517.
 2017-11-06 19:52:05 -06:00
Rowan Meara
172c36f517 Fix EEPROM crc (#8284) 2017-11-06 19:19:30 -06:00
Scott Lahteine
cc4d28b73c
Update bilinear for native workspace 2017-11-06 17:04:41 -06:00
Scott Lahteine
94c7205d64
Merge pull request #8281 from thinkyhead/bf2_alligator_dac 
[2.0] Use fastio for Alligator dac084s085, etc.
 2017-11-06 12:16:18 -06:00
Scott Lahteine
2246316605 Fix name collision. timer_t => hal_timer_t 2017-11-05 19:31:07 -06:00
Jason Hitesman
4efaef7039 [2.0.x] Fix archim2 SSDS define (#8278) 
* Fix SSDS define

* Update pins_ARCHIM2.h
 2017-11-05 19:23:19 -06:00
Scott Lahteine
c8dfa26bc8 Use fastio for STM32F1 endstop interrupts 2017-11-05 19:20:28 -06:00
Scott Lahteine
185dec800b Use fastio for HAL SPI EEPROM 2017-11-05 19:20:03 -06:00
Scott Lahteine
297666ea14 Use fastio for Alligator dac084s085 2017-11-05 19:14:42 -06:00
Scott Lahteine
c5d95d318b
Merge pull request #8249 from thinkyhead/bf2_nozzle_cleanup 
[2.0] Cleanup Nozzle class, fix XY vs Z move order
 2017-11-05 18:51:11 -06:00
Scott Lahteine
7e2fee9d56
Merge pull request #8274 from tcm0116/2.0.x-re_arm_D8 
[2.0.x] Correct RAMPS_D8_PIN for Re-ARM
 2017-11-05 18:39:28 -06:00
Scott Lahteine
59c558d612
Merge pull request #8275 from GMagician/2.0.x-Typo-fix 
[2.0.x] typo fix (removed spaces)
 2017-11-05 18:39:04 -06:00
Scott Lahteine
be73d5cc08 Cleanup Nozzle class, fix XY vs Z move order 2017-11-05 18:31:07 -06:00
GMagician
9e93b7ccbd [2.0.x] removed spaces 
Removed spaces in array declaration
 2017-11-05 20:42:48 +01:00
Thomas Moore
b91a822d7a Correct RAMPS_D8_PIN for Re-ARM 2017-11-05 13:03:42 -06:00
studiodyne
d295f984e3
Update fwretract.cpp 2017-11-05 15:42:30 +01:00
Scott Lahteine
1b40e9c464 Implement CNC_COORDINATE_SYSTEMS 2017-11-04 22:28:46 -05:00
Scott Lahteine
1b42fba39b Add CNC_COORDINATE_SYSTEMS to configs 2017-11-04 22:28:46 -05:00
Scott Lahteine
a22434508f Match tweaks to G33 from 1.1 2017-11-04 22:28:46 -05:00
Scott Lahteine
c07bbd4154 Prettify some EEPROM code 2017-11-04 22:28:46 -05:00
Scott Lahteine
d6aa127c76 Remove I2CPEM workspace offset 2017-11-04 22:28:46 -05:00
Scott Lahteine
79772219ae Fix Fan Multiplexer init 2017-11-04 22:28:46 -05:00
Scott Lahteine
ca7d36d9ed RAMPS pins for ANET_KEYPAD_LCD 2017-11-04 21:22:53 -05:00
Colten Edwards
e0a6ee8da5 [2.0] Fix up G33, LPC1768 + SDCARD_SORT_ALPHA (#8250) 
* Update Conditionals_post.h

* Add a cast to round() to convert to a unsigned int

Add's a cast to round() so that it will compile properly. round() returns a float which must be cast to a integer for the following % operation. Use a unsigned int as a negative index to an array is wrong. Should never be more than 255 points allowing us to use a 8 bit cast.

* Update G33.cpp
 2017-11-04 18:04:18 -05:00
Scott Lahteine
dac1f6fe74 Tweaks to cubic_b_spline code style 2017-11-04 14:46:10 -05:00
Scott Lahteine
4df024d7b9
Merge pull request #8234 from thinkyhead/bf2_native_operation 
[2.0.x] Operate in Native Machine Space
 2017-11-04 14:31:44 -05:00
Scott Lahteine
601ccded89 Fix case-insensitive config issue 2017-11-04 14:10:13 -05:00
Scott Lahteine
f8393a0908 Operate in Native Machine Space 2017-11-04 00:05:38 -05:00
Scott Lahteine
d83a9a53e8
Merge pull request #8220 from thinkyhead/bf2_serial_port_-1 
[2.0] Add SERIAL_PORT -1 option for configurators
 2017-11-03 15:25:12 -05:00
Scott Lahteine
93ba72ea83 Add SERIAL_PORT -1, set on SBASE, STM32F103RET6 2017-11-03 15:22:45 -05:00
Scott Lahteine
7e43dd1d23 Fix probes configuration url 
Based on #8241 by @machaj
 2017-11-03 13:35:40 -05:00
AnHardt
ca0e4b4e96 Some cleanup around 'lcd_bootscreen()' and 'lcd_kill_screen()' 
Move 'lcd_bootscreen()' from `lcd_init()` to 'setup()' where it is cexecute exactly once. Saves 'bool show_bootscreen'.
Move the call of 'lcd_custom_bootscreen()' to the begin of 'lcd_bootscreen()'.
Move the delays into the related functions.
Move the picture loop around 'lcd_kill_screen()' into the function.
 2017-11-03 12:02:48 +01:00
Scott Lahteine
84b93d941f
Merge pull request #8178 from thinkyhead/bf2_config_tweak 
[2.0.x] Faster menu navigation for Anet A8
 2017-11-03 04:49:17 -05:00
teemuatlut
70be4d206e [2.0.x] UltiMachine Archim2 (#8190) 
* UltiMachine Archim2 support

* SPI gets included by the library

* Invert TMC2130 diag pin state

* Clean up Archim2 pins

* Update Archim2 config

* FAN2 -> FAN1

* Cleanup

* Add brief Archim installation instructions

* Bring pins into compliance

* Update 1.0 SD Detect pin for 1.1

* Update Configuration.h

* Update pins_ARCHIM2.h
 2017-11-03 04:48:15 -05:00
Scott Lahteine
f3deb37bdf
Merge pull request #8236 from thinkyhead/bf2_protect_M303 
[2.0.x] M303 thermal runaway protection
 2017-11-03 04:42:14 -05:00
Scott Lahteine
31f112cf58 Cleanup trailing whitespace 2017-11-03 04:07:45 -05:00
Scott Lahteine
2f9e42feb9 M303 thermal runaway protection 2017-11-03 03:57:46 -05:00
Scott Lahteine
e5ae545647 Remove ADCKey steps acceleration 2017-11-03 03:41:55 -05:00
Luc Van Daele
6827e243a0 [2.0.x] G33 magic numbers (#8171) 
* [2.0.x] G33 magic numbers

* oops

* Comments

* oops

* warning

* better comment section

* remarks

* extra grids
 2017-11-03 03:36:16 -05:00
Scott Lahteine
8735ae984b
Merge pull request #8227 from tcm0116/2.0.x-pin_mapping 
LPC1768: updates to use the new pin_t typedef
 2017-11-03 03:10:19 -05:00
AnHardt
c72a0610b4 Fix watchdog in WATCHDOG_RESET_MANUAL mode AVR 2017-11-03 04:43:00 +01:00
Thomas Moore
13d839795c LPC1768: updates to use the new pin_t typedef 2017-11-02 18:43:57 -05:00
Scott Lahteine
eb13b8d985 Add MKS Gen L board 2017-11-02 17:06:08 -05:00
Morten
063e957fc4 Update pins_MKS_SBASE.h (#8188) 
* Update pins_MKS_SBASE.h

Deleted E_MUX2, not used.
Changed #define LCD_PINS_D4      P0_14  // EXP1.5 to #define LCD_PINS_D4      P0_15  // EXP1.5, wrong in MKS's pinout schematic.
Swapped TEMP_BED_PIN and TEMP_0_PIN port's, request from user, more logical...

* Update pins_MKS_SBASE.h

Moved MUX signals to J8 and re added MUX2, cleaner wiring..
 2017-11-02 13:50:23 -05:00
Scott Lahteine
f7133e53fd
Fix case light off 
Addressing #8205
 2017-11-01 21:22:15 -05:00
Scott Lahteine
0108d5181f Allow asterisks in G-Code commands 
Addressing #6655
 2017-10-31 21:20:41 -05:00
Scott Lahteine
34745b2183 Organize boards.h by architecture 2017-10-31 16:10:38 -05:00
android444
9cc1d8e312 [2.0.x] Support for SilverGate Board 2017-10-31 15:27:26 -05:00
Scott Lahteine
03e5369411 Faster menu navigation for Anet A8 
Addressing #8166
 2017-10-31 14:46:55 -05:00
Scott Lahteine
f1edf83720
Merge pull request #8187 from rafaljot/patch-5 
Update InterruptVectors_Due.cpp
 2017-10-31 14:14:08 -05:00
Scott Lahteine
b2bd77c40a
Merge pull request #8191 from thinkyhead/bf2_rearm_more 
[2.0.x] Add SDCARD_SORT_ALPHA options for LPC1768
 2017-10-31 14:12:14 -05:00
Scott Lahteine
571ced712d Add SDCARD_SORT_ALPHA options for LPC1768 2017-10-31 14:05:40 -05:00
rafaljot
778e4e4c23
Update InterruptVectors_Due.cpp 
const pfnISR_Handler *isrtab = get_relocated_table_addr();

What compiler do you use? Arduino 1.8.5 can't compile this "const".
 2017-10-31 15:00:06 +01:00
Scott Lahteine
cae8703e0d
Merge pull request #8181 from thinkyhead/bf2_fix_bootscreen_repeat 
[2.0.x] Only show custom bootscreen once
 2017-10-31 02:37:40 -05:00
Scott Lahteine
a516856df9 Only show custom bootscreen once 2017-10-31 01:47:30 -05:00
GMagician
727a403ba1 [2.0.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour (#8176) 
* [2.0.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour

NO_MOTION_BEFORE_HOMING should prevent XYZ movements only when homing is not done.
E axes should be allowed

* Update G0_G1.cpp

* Update G0_G1.cpp
 2017-10-30 22:50:22 -05:00
Alexey Shvetsov
577659cacf Basic support for Azteeg_X5_GT (#8139) 
* Basic support for Azteeg_X5_GT

Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>

* Add fan pins for AZTEEG X5 GT

Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>

* Fix endstop pins

* Add servo0 pin
 2017-10-30 16:01:20 -05:00
Scott Lahteine
0b02f9cc33
Merge pull request #8168 from thinkyhead/bf2_config_tweak 
[2.0.x] Apply Re-ARM SPI review items
 2017-10-30 15:49:50 -05:00
Scott Lahteine
04c0d9f3c3 Implement kinematic software endstops 2017-10-30 15:16:30 -05:00
Scott Lahteine
9f89b5d876 Fix for MAX_VFAT_ENTRIES sanity check 2017-10-30 15:11:47 -05:00
Scott Lahteine
2cdde08339 Apply items specified in code review 
Followup to #8122
 2017-10-30 15:03:07 -05:00
Scott Lahteine
34be5d33c0 The plural of 'axis' is 'axes' 2017-10-30 14:21:43 -05:00
Bob-the-Kuhn
6e5f13a5c2
Merge pull request #8122 from Bob-the-Kuhn/2.0.x-restore-Re-ARM-RepRap-Discount-Full-Graphics-fix-(partial-solution) 
2.0.x - Restore fix for garbaged display on Re-ARM with RepRap Full Graphics Smart Controller
 2017-10-30 13:16:16 -05:00
Bob-the-Kuhn
b7a66742dd tested 
add sort alpha section to other LPC1768 boards
 2017-10-30 13:01:19 -05:00
Jeffrey Li
bbc2e66634 Fix AZSMZ MINI pins for new LPC1768 pinmapping 2017-10-30 04:19:06 -07:00
Scott Lahteine
31e96935f7 Fix EXTRA_FAN_SPEED 
Addressing #8158
 2017-10-30 00:10:00 -05:00
Scott Lahteine
c94dce6b32
Merge pull request #8113 from thinkyhead/bf2_fixup_sd_reprint 
[2.0.x] Cleanup after SD Print Again, whitespace, tabs
 2017-10-29 23:57:51 -05:00
Scott Lahteine
ce1c9c0808 Tweak QUICK_HOME description 2017-10-29 23:48:13 -05:00
Scott Lahteine
12458cefc4 Remove 5s timer hack. Encoder pos is saved on print start! 2017-10-29 22:45:19 -05:00
Scott Lahteine
9a4cf11835 Remove return_to_status_ms hack, just use defer... 2017-10-29 22:45:18 -05:00
Scott Lahteine
8949c8c0a5 Move SD_REPRINT_LAST_SELECTED_FILE to ultralcd.cpp 2017-10-29 22:45:18 -05:00
Scott Lahteine
817175613a
Merge pull request #8157 from thinkyhead/bf2_anet_10_servo 
[2.0.x] Define a default SERVO0_PIN for Anet 1.0
 2017-10-29 19:55:00 -05:00
Scott Lahteine
723f2a77f6 Implement support for Dual X and Y endstops 2017-10-29 18:56:04 -05:00
Scott Lahteine
e04425281d Add Dual Steppers / Endstops to configs 2017-10-29 18:56:04 -05:00
Scott Lahteine
edff2c917b Cleanup for DIGIPOTS settings 2017-10-29 18:56:03 -05:00
Scott Lahteine
3e8754a38a Add/correct time units on planner vars / M205 B 2017-10-29 18:47:21 -05:00
Scott Lahteine
b2a48f1a04 Provide a SERVO0_PIN for non-standard LCD 2017-10-29 18:36:16 -05:00
Scott Lahteine
b232f39341 AVR: Hidden option to use 8s watchdog 2017-10-29 18:36:16 -05:00
Scott Lahteine
9d4cfd2013
Merge pull request #8142 from thinkyhead/bf2_fix_m303 
[2.0.x] Fix M303 thermal protection
 2017-10-29 04:46:34 -05:00
Scott Lahteine
eae0aea1e0 Fix M303 thermal protection 2017-10-29 04:30:50 -05:00
Luc Van Daele
a1a4fc277e (2.0.x) serious bug G33 (#8136) 
* (2.0.x) serious bug G33

* Revert config changes

This reverts commit 74b5a98223b7b7fb970d05b8541f4a079c3cfe56.
 2017-10-29 04:12:33 -05:00
Thomas Moore
325233b454 Fix automatic stepper assignment for X/Y/Z dual stepper drivers (#8130) 2017-10-28 19:45:07 -05:00
Thomas Moore
50b4f9cbf7 LPC1768 Pin Mapping and M43 cleanup (#8119) 
* LPC1768 M43 cleanup

* Update pinmapping.h to #define pins
 2017-10-28 19:44:54 -05:00
Scott Lahteine
6b1d1a818b Revert default BABYSTEP_MULTIPLICATOR to 1 2017-10-27 19:45:44 -05:00
etagle
ba8dc678f5 Arduino Due XON/XOFF implementation 
Alos includes emergency parser and configurable TX/RX buffers for Arduino Due.
 2017-10-27 03:24:23 -05:00
etagle
8d9c3cc2b7 Add a module for Due SRAM-based Interrupt Vector Table 
This is the ONLY way to be able to override ISRs stolen by the Arduino Runtime, such as Serial or USB device interrupts. This feature is needed so Arduino modules can be replaced and enhanced.
 2017-10-27 03:24:23 -05:00
etagle
c9bbef6380 Cosmetic fix for HAL_AVR/MarlinSerial.cpp 
Instead of using const char, it is better to use uint8_t
 2017-10-27 03:24:23 -05:00
LVD-AC
dcfc2503c2 G33 Autotune calibration update #10 2017-10-27 02:11:24 -05:00
Scott Lahteine
b338cafc65 Merge pull request #8111 from thinkyhead/bf2_fwretract_fix_oct26 
[2.0.x] Improved Firmware Retraction logic
 2017-10-27 02:02:06 -05:00
Scott Lahteine
ada90f7335 Clean up trailing spaces 2017-10-26 23:33:43 -05:00
Scott Lahteine
7fad26549b Concise SD_REPRINT_LAST_SELECTED_FILE description 2017-10-26 23:33:02 -05:00
Scott Lahteine
33f379fe88 Add some Polish language 
Thanks @SCiunczyk
 2017-10-26 22:49:04 -05:00
Scott Lahteine
daeff5a11a Tweak neopixel self-test 2017-10-26 22:47:07 -05:00
Scott Lahteine
0ceec1f166 Fix leveling_active_at_z warning 2017-10-26 22:22:54 -05:00
studiodyne
eb02f8c719 Improve FWRETRACT logic, add common sense 2017-10-26 22:22:54 -05:00
Scott Lahteine
bd78ca0ee3 Add M290 Babystepping 2017-10-26 20:44:43 -05:00
Scott Lahteine
ce5f0ec85a Bring STM32 example config up to date 2017-10-26 17:25:44 -05:00
Scott Lahteine
46e9eae159 Tweak to M100 config comment 2017-10-26 17:25:44 -05:00
Scott Lahteine
c45514f811 Merge pull request #8094 from thinkyhead/bf2_neopixel_led_parity 
[2.0.x] Bring NEOPIXEL_LED into parity with 1.1.x
 2017-10-26 17:24:38 -05:00
Bob-the-Kuhn
229a27a1c7 save FLASH by using reduced font for some languages 2017-10-26 16:08:17 -05:00
Roxy-3D
3f5f39576b Reprint option for last SD Memory card file (#8106) 
* Re-Print of same SD Memory Card file with single click

* Re-Print of same SD Memory Card file with single click
* This is the bugfix-v2.0.0 version of  https://github.com/MarlinFirmware/Marlin/pull/8104
 2017-10-26 15:50:18 -05:00
Thomas Moore
9e699811d2 Make LPC1768 pinmapping not specific to Re-ARM (#8063) 
* Merging early because of build failures.  See #8105

* Make LPC1768 pinmapping not specific to Re-ARM

* Add HAL_PIN_TYPE and LPC1768 pin features

* M43 Updates

* Move pin map into pinsDebug_LPC1768.h

* Incorporate comments and M226

* Fix persistent store compilation issues

* Update pin features

* Update MKS SBASE pins

* Use native LPC1768 pin numbers in M42, M43, and M226
 2017-10-26 13:37:26 -05:00
Scott Lahteine
3ac581eac9 Neopixel changes for parity with 1.1.x 2017-10-25 18:40:04 -05:00
jeffyl
7b3098bbd5 Add AZSMZ Mini (#8005) 
* Add AZSMZ Mini

* Remove tabs, adjust spacing

* Renumber boards to group by family

* Patch up spacing

* Tweak
 2017-10-25 01:16:54 -05:00
Scott Lahteine
e00ed10c4c GT2560 config MKS_MINI_12864 => SDSUPPORT 2017-10-25 01:12:48 -05:00
Scott Lahteine
10a5e4d80f Merge pull request #8078 from thinkyhead/bf2_mks_mini_lcd 
[2.0.x] Add MKS MINI 12864 support to GT2560
 2017-10-25 01:10:03 -05:00
Scott Lahteine
ee9b8bf0f1 Add MKS MINI 12864 support to GT2560 2017-10-24 19:15:41 -05:00
Scott Lahteine
f65fc7ffab Merge pull request #8044 from thinkyhead/bf2_mesh_consolidate 
[2.0.x] Simplify mesh bounds config
 2017-10-24 18:56:43 -05:00
Scott Lahteine
070cd34fe8 Merge pull request #8077 from thinkyhead/bf2_MKS_BASE_followup 
Clean up HAL trailing spaces, MKS SBASE pins
 2017-10-24 18:38:48 -05:00
Scott Lahteine
7f55d82fd1 Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h 2017-10-24 18:26:43 -05:00
Scott Lahteine
90a14b4f5b Clean up HAL trailing spaces, MKS SBASE pins 2017-10-24 18:20:23 -05:00
Thomas Moore
51fafccc16 [2.0.x] Enable hardware serial ports on LPC1768 (#8004) 
* Enable hardware serial ports on LPC1768

* Fix compilation errors with other HALs

* FIx order of includes in LPC1768 HAL main.cpp

* Add support for RX_BUFFER_SIZE and TX_BUFFER_SIZE options in Configuration_adv.h
 2017-10-24 17:28:33 -05:00
Scott Lahteine
580b6e9089 Apply physical limits to mesh bounds 2017-10-24 16:54:07 -05:00
Scott Lahteine
4e2baeb3e1 Update indentation, file-wrapping for Marlin 2.0.x 2017-10-24 16:54:06 -05:00
Scott Lahteine
60af705e6d Relocate SPI.h to the HAL folder 2017-10-24 16:54:06 -05:00
Scott Lahteine
46aae4c6e7 Merge pull request #8074 from thinkyhead/bf2_verbiage_like_8061 
Fix some config verbiage
 2017-10-24 15:25:12 -05:00
Scott Lahteine
3356d5a72d Merge pull request #8072 from thinkyhead/bf2_fix_M600 
[2.0.x] Fix position sync in M600 pause/resume
 2017-10-24 14:55:46 -05:00
Scott Lahteine
5f87324536 Fix some config verbiage 2017-10-24 14:53:42 -05:00
Scott Lahteine
272f9f65dc Fix some typos 2017-10-24 14:29:15 -05:00
studiodyne
8181220bfd Fix position sync in M600 pause/resume 2017-10-24 14:29:15 -05:00
cdedwards
6296ab2173 Add GFX overlay to UBL mesh edit (#8038) 
* Add GFX overlay to UBL mesh edit

Fixed misplaced HAS_TEMP_BED in dogm_bitmaps.h

rename _lcd_babystep_zoffset_overlay to _lcd_zoffset_overlay_gfx and move it out of BABYSTEP_ZPROBE_OFFSET to we can use it for over things. Add this function into UBL mesh edit screen.

update all Configuration.h to add ENABLE_MESH_EDIT_GFX_OVERLAY

* Add Sanity to UBL  insanity

Need to check for DOGLCD  otherwise error out.
 2017-10-24 14:14:03 -05:00
Roxy-3D
72156a2029 change to better (more clear) names (#8050) 
set_destination_to_current() changed to set_destination_from_current()

set_current_to_destination() changed to set_current_from_destination()
 2017-10-21 11:42:26 -05:00
Scott Lahteine
0cb423b5b3 Apply consistency for other configs 2017-10-21 00:41:51 -05:00
Scott Lahteine
8c78f8f790 Add Makeboard MINI for Micromake C1 2017-10-21 00:41:51 -05:00
Scott Lahteine
1fbb307aaf Merge pull request #8021 from thinkyhead/bf2_scroll_longnames 
[2.0.x] Add SCROLL_LONG_FILENAMES to reveal longer filenames
 2017-10-20 21:33:54 -05:00
Scott Lahteine
3d2b2eb1ca Prevent SDCARD_SORT_ALPHA from exploding 2017-10-20 19:13:21 -05:00
Scott Lahteine
783ddf9691 Add SCROLL_LONG_FILENAMES option 2017-10-20 19:13:21 -05:00
Roxy-3D
5439358281 Basic UBL operations working on 32-bit platforms (#8024) 
* 32-bit work for UBL

* Update FT i3-2020 reference file
 2017-10-19 10:44:45 -05:00
Scott Lahteine
9e5cbf0198 BQ should set this in its config, and does 2017-10-18 22:56:03 -05:00
Scott Lahteine
348e5e3109 Simplify Cartesian probing boundaries 
Followup to #8012
 2017-10-18 17:14:32 -05:00
Luc Van Daele
3986a84f77 boolval revisited (#8016) 2017-10-18 14:03:17 -05:00
Roxy-3D
572cf0ec95 UBL able to generate mesh and save and load it on 32-bit platforms (#8015) 
* Get UBL Mesh Generation, Mesh Save & Mesh Load working with 32-Bit platforms

* clean up read_data() and write_data() for non-LPC1768 HAL's

* Get read_data() and write_data() return codes consistent

All HAL's read_data() and write_data() return false if they succeed.

* Get read_data() and write_data() return codes to be consistent

Make read_data() and write_data() return true if an error happens.

* Say UBL is now checked out on machine types in default Configuration.h file.
 2017-10-18 14:00:29 -05:00
Thomas Moore
67cc29cd3c Update UBL mesh boundaries to accomidate beds centered at 0, 0 (#8012) 2017-10-18 10:03:30 -05:00
Roxy-3D
6cb26c98c8 Fix Baby Stepping on 32-Bit platforms (#8001) 
Also, Max7219 debug code was used for this effort.   It has been
improved and hardened.
 2017-10-16 16:29:37 -05:00
Scott Lahteine
3b7b0492f8 Merge pull request #7993 from jeffyl/bugfix-2.0.x 
[2.0.x] Proper support for AZSMZ 12864 LCD on SmartRAMPS
 2017-10-16 14:12:29 -05:00
Jeffrey Li
26531f2715 Add lcd to all sample configs 2017-10-16 03:24:25 -07:00
Scott Lahteine
ce48403a0b Add EXTRA_FAN_SPEED feature 
Based on #7883 by @studiodyne
 2017-10-16 02:34:13 -05:00
Jeffrey Li
eeb4611606 Add proper support for the AZSMZ 12864 LCD on a SMART RAMPS 2017-10-16 00:33:07 -07:00
Scott Lahteine
c46189e429 Fix UBL+Delta segmented feedrate 
Based on #7948
 2017-10-15 16:31:09 -05:00
Scott Lahteine
5c4f3e0107 Add LCD_SET_PROGRESS_MANUALLY 2017-10-15 03:05:29 -05:00
Scott Lahteine
014a83fe09 Merge pull request #7984 from thinkyhead/bf2_micromake_c1 
[2.0.x] Micromake C1 Configurations, Unaccented French
 2017-10-14 21:19:32 -05:00
Scott Lahteine
bc7df0188e Add Micromake C1 configurations 2017-10-14 20:28:12 -05:00
Scott Lahteine
34a261416f Add unaccented French language 2017-10-14 20:28:12 -05:00
Scott Lahteine
e587f0893c Define AVR_ATmega2560_FAMILY_PLUS_70 in Conditionals 2017-10-14 19:05:32 -05:00
Scott Lahteine
fd128b3c93 Fix some AVR HAL code style 2017-10-14 19:05:10 -05:00
Scott Lahteine
799360c576 Enhance Teensy/RAMPS pins files 2017-10-14 18:44:20 -05:00
Scott Lahteine
d3e5a22a5d Add MIN_SOFTWARE_ENDSTOP_[XYZ] to example configs 2017-10-14 18:44:20 -05:00
Jeff Eberl
b206f70693 Split the software endstop capability by axis. 2017-10-14 18:44:20 -05:00
Scott Lahteine
ec69e97bda Merge pull request #7974 from jeffyl/bugfix-2.0.x 
Fix include path for VIKI
 2017-10-14 17:38:42 -05:00
Morten
91e28edda6 [2.0.x] Add new board: MKS Sbase (#7945) 
* Add files via upload

* Add files via upload

* Add files via upload

* Checked LCD / edited / revised pins_MKS_BASE.h

As requested :)

* Delete Configuration_adv.h

* Delete Configuration.h

* Deleted /Marlin/Marlin/src/config/examples/MksSbase/*.* and moved them to /Marlin/Marlin/src/config/examples/Mks/Sbase/*.*

* Add files via upload
 2017-10-14 09:44:18 -05:00
Jeffrey Li
3c8a3a02ba Fix include path for VIKI 2017-10-14 04:06:17 -07:00
Scott Lahteine
4586acad8c Merge pull request #7959 from alexxy/bugfix-2.0.x 
Python isnt always python2
 2017-10-14 05:02:07 -05:00
Scott Lahteine
497f86453e Merge pull request #7964 from gallynero/patch-2 
fix 'axis_unhomed_error' not defined error
 2017-10-14 05:00:58 -05:00
Scott Lahteine
c0dddd4233 Tweaks to tool_change, GcodeSuite::T() 2017-10-14 02:53:19 -05:00
Scott Lahteine
ca66574062 ADC sensor fix inspired by 'Evgen2' on Twitter 2017-10-14 02:28:13 -05:00
Scott Lahteine
1344ca4b2f UBL no longer needs ubl_state 2017-10-14 02:18:32 -05:00
Scott Lahteine
8dd08425fd Improve LCD leveling edits 2017-10-14 02:18:31 -05:00
Scott Lahteine
3e3911fb81 Use planner.leveling_active for all leveling systems 2017-10-14 02:18:31 -05:00
Scott Lahteine
32c607ffe2 Ensure fade factor is recalculated if fade height changes 2017-10-14 02:18:31 -05:00
Scott Lahteine
ca1e47375c Move fade_scaling_factor_for_z to Planner 2017-10-14 02:18:31 -05:00
Scott Lahteine
9a930ebec2 Make leveling_is_active a macro 2017-10-14 02:18:31 -05:00
Scott Lahteine
58abc66c1d Tweak bed leveling conditionals 2017-10-14 02:18:31 -05:00
Scott Lahteine
1adb5a6a48 Remove obsolete UBL z_offset 2017-10-13 08:22:46 -05:00
gallynero
3619a4cbea fix 'axis_unhomed_error' not defined error 
Fix 'axis_unhomed_error' not defined error when pause with unhomed status
 2017-10-13 09:08:02 +02:00
Alexey Shvetsov
12d212d1b4 Python isnt always python2 
So now this script is compatible with both python versions 2 and 3

Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
 2017-10-13 01:39:06 +03:00
Scott Lahteine
cc01a36363 Merge pull request #7947 from thinkyhead/bf2_more_READMEs 
[2.0.x] Add a README.h file for Arduino IDE users
 2017-10-12 06:56:41 -05:00
Scott Lahteine
4764710b11 Add a README.h file for Arduino IDE users 2017-10-11 18:10:15 -05:00
Bob-the-Kuhn
4e3ee845b9 config_adv (#7941) 
get rid of twi.h

move to board files
 2017-10-11 15:42:24 -05:00
Roxy-3D
0e260c6c1d Get FolgerTech i3-2020 working again with 32-bit platforms (#7944) 
Setup FolgerTech i3-2020 Configuration files as a reference platform for
32-Bit work.

Also fix MAX7219 debug lights on 32-bit platforms.
 2017-10-11 15:23:04 -05:00
Bob-the-Kuhn
26bfae58d4 MPC4451 I2C support 2017-10-11 00:30:41 -05:00
Scott Lahteine
1f5c432e29 Merge pull request #7920 from thinkyhead/bf2_neopixel_full 
[2.0.x] Move FILAMENT_RUNOUT_SENSOR to a feature
 2017-10-10 03:05:00 -05:00
Scott Lahteine
732e87e83c Merge pull request #7892 from GMagician/Serial-double-echo-fix 
[2.0.x] Serial double echo fix
 2017-10-10 02:42:16 -05:00
Scott Lahteine
f8e8fcb978 Move FILAMENT_RUNOUT_SENSOR to a feature 2017-10-10 02:37:42 -05:00
Slawomir Ciunczyk
a11e6a1022 Different NEOPIXEL types 
Same as #7728 but for 2.0.x,
Lot of cleanup and remove references in whole code to other "LED files" than leds.h. Now will be much easier to add next drivers/libraries. e.g. FastLED. But bad news, currently FastLED is suporting only RGB devices (no RGBW)
 2017-10-10 02:17:36 -05:00
Scott Lahteine
b30b55307c Merge pull request #7909 from thinkyhead/bf2_goodbye_legacy_advance 
[2.0.x] Remove legacy ADVANCE feature
 2017-10-10 00:31:18 -05:00
Scott Lahteine
1d04197f2f Merge pull request #7916 from thinkyhead/bf2_probeless_ubl 
[2.0.x] Allow UBL G29 and G26 to build without a probe
 2017-10-10 00:30:27 -05:00
Thomas Moore
9b0ee53b12 Use segmented moves when moving axis from LCD 2017-10-09 23:25:43 -05:00
Scott Lahteine
442669d23c Allow UBL to build without a probe 2017-10-09 18:57:41 -05:00
Scott Lahteine
20ebe218c8 Tweaks to VIKI lcd support 2017-10-09 17:01:07 -05:00
Scott Lahteine
09fa34a9e1 Modernize configs 2017-10-09 16:18:10 -05:00
Scott Lahteine
560d366b80 Move VIKI SCK/MOSI pins fix to Conditionals_POST.h 2017-10-09 16:13:49 -05:00
Scott Lahteine
e9bcb9d048 Add 4 new LCD displays 2017-10-09 15:58:02 -05:00
Scott Lahteine
03f4891fb9 Remove legacy ADVANCE feature 2017-10-09 04:25:18 -05:00
GMagician
546f02c6f4 [2.0.x] Addressing #7896 
Compiler error, added char c variable
 2017-10-08 23:16:35 +02:00
GMagician
eb96d37da0 Serial double echo fix 
Fix double character sent when TX buffer size is 0 on mega2560
 2017-10-07 22:20:00 +02:00
Scott Lahteine
deeea98d22 LCD filename already concatenated 2017-10-07 15:16:05 -05:00
Scott Lahteine
a058638d11 Merge pull request #7875 from thinkyhead/bf2_fill_eeprom_dat_ff 
[2.0.x] Update LPC persistent store to initialize eeprom.dat with FF
 2017-10-07 15:13:21 -05:00
Scott Lahteine
ae1a18d0a1 LCD filename already concatentated 2017-10-07 15:10:15 -05:00
Scott Lahteine
12aa1b999a Fix display issue with SD_SORT_ALPHA cached names 2017-10-07 15:08:08 -05:00
Dave Johnson
9d0e4ea3d5 [2.0.x] Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled (#7879) 
* Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled

If HOME_AFTER_DEACTIVATE, there is no need to warn on LCD since printer will home prior to starting print.  Saves 60 bytes PROGMEM on AVR with U8g panel.

* Reduce lines used

* Reduce lines used
 2017-10-07 15:02:55 -05:00
Scott Lahteine
8315a8a716 Apply fixes for DUE 
Alternative to #7882. If F_CPU is greater than 1000 it can be evenly divided by 8. Over 10000, 16; over 100000, 32; over 1 million, 64; etc.
 2017-10-07 14:31:18 -05:00
Scott Lahteine
4b36a542e0 Merge pull request #7876 from thinkyhead/bf2_hotend_messages 
[2.0.x] Addressing #7612
 2017-10-07 13:37:43 -05:00
Unknown
12730c1303 [2.0.0] Resolve USE_CONTROLLER_FAN compile errors 
Add to controllerfan.cpp:
#include "../module/stepper_indirection.h"
#include "../module/temperature.h"
 2017-10-07 05:26:36 -07:00
Scott Lahteine
7fb3343bda [2.0.x] Addressing #7612 
Change "extruder" to HOTEND in sanity error messages
 2017-10-07 02:27:26 -05:00
victorpv
8998f31ee1 Update LPC persistent store to initialize eeprom.dat with FF 
This change initialize any data in eeprom.dat beyond the current file size to FF.
That way if eeprom.dat is deleted and created again, it doesn't take the old values or random ones, but rather starts with FF in all positions as a real brand new or erased eeprom.dat
Currently if you delete eeprom.dat and restart the board, the new file is created in the same sector with the same content, since FAT does not actually delete the data, just marks the sector as free. I tested by deleting the file, and then rebooting the board, and checking the file content.
The change can be tested in the same way, deleting, rebooting the board, and then the new content should be all FF.

If an eeprom file already exist with data on it, but smaller than E2END, it will be padded with FF on first access, so it will not have random or old content appended.
 2017-10-07 02:18:42 -05:00
Scott Lahteine
2aa22c5a5e Merge pull request #7874 from thinkyhead/bf2_anet_encoder_pulses 
[2.0.x] Fixing ANET encoder pulses
 2017-10-07 01:21:23 -05:00
Scott Lahteine
f99d1dedae Fixing #7833 
Derived from #7873
 2017-10-07 00:10:05 -05:00
Scott Lahteine
de84f57a9c Patch SD file draw bug 2017-10-06 23:57:11 -05:00
Scott Lahteine
ef90b49fff Remove extra NEWPANEL settings in Conditionals_LCD.h 2017-10-06 23:56:58 -05:00
Scott Lahteine
67a7dd9792 Merge pull request #7866 from thinkyhead/bf2_finally_G33_is_done 
[2.0.x] Apply G33 updates
 2017-10-06 16:03:26 -05:00
Scott Lahteine
b220bc7521 Apply G33 updates 
Adapted from #7865
 2017-10-06 15:47:51 -05:00
Scott Lahteine
9fe7f53216 Misc general spacing cleanup 2017-10-06 15:14:01 -05:00
Scott Lahteine
c0382cd8cd Add UTF-8 mapper for Slovak language 
Based on #7862, #7846 by @rmoravcik
 2017-10-06 15:14:01 -05:00
Scott Lahteine
c81843a414 Set TEMP_SENSOR_0 to 1 in CR-10 example config 
As pointed out in #7692 by @totalitarian
 2017-10-06 14:30:53 -05:00
android444
72693a7e87 [2.0.x] Fixed RAMPS FD V1 pins.h file (#7852) 
* test only

test

* Fixed RAMPS FD V1 pins.h file

* Fix typo
 2017-10-06 13:27:15 -05:00