Scott Lahteine
6ba8cf8405
Merge pull request #9163 from GMagician/2.0.x-SD-issues-fix
...
[2.0.x] sd issue fix
2018-01-14 20:48:52 -06:00
Marvin Sinister
50c55b25f7
Renamed to upercase
2018-01-13 15:02:07 +01:00
GMagician
6667a916a4
Indentation fix
2018-01-13 09:48:26 +01:00
GMagician
be717b3c07
Save some program memory
...
This will save some program memory with no speed lose
2018-01-13 08:56:51 +01:00
GMagician
f37c64ee5b
Fix unsupported CMD59
...
It seems that some SD cards don't support CRC_ON_OFF command. This fix will permit to use also these cards but leaving CRC check active on the system
2018-01-13 08:53:12 +01:00
Thomas Moore
cfd989d7c5
Fix EEPROM SettingsData for 32-bit architectures
2018-01-12 19:38:23 -06:00
Bob-the-Kuhn
da600e5fbe
Merge pull request #9132 from Bob-the-Kuhn/add-VIKI2-to-Travis
...
[2.0.x] add VIKI2 test to Travis & fix LCD contrast (again)
2018-01-12 00:42:04 -06:00
Scott Lahteine
742cff5f3c
Followup to #9141
2018-01-11 22:15:01 -06:00
Thomas Moore
84de428d30
[2.0.x] Fix compile errors ( #9141 )
...
* Update persistent_store_impl.cpp
* Remove define BYTE from serial functions since Arduino docs typically show 0 for the normal case.
2018-01-11 21:43:26 -06:00
Bob-the-Kuhn
e633ce06c7
LCD contrast type mismatch is back
...
WORKS!
2018-01-11 10:32:58 -06:00
Scott Lahteine
e654ea1e1a
Merge pull request #9130 from thinkyhead/bf2_tmc_followup
...
[2.0.x] More TMC followup
2018-01-11 03:40:45 -06:00
Scott Lahteine
8ac246162e
Creality CR-10S configurations
...
Provided by printedsolid.com
2018-01-11 01:10:17 -06:00
Scott Lahteine
048486390e
Bring some configs up to date
2018-01-11 01:10:17 -06:00
Scott Lahteine
6a043eee55
Various updates for TMC support
2018-01-10 23:04:48 -06:00
Scott Lahteine
d7fd78cb91
Merge pull request #8148 from tcm0116/2.0.x-multi_host
...
[2.0.x] Add multi-host support
2018-01-10 02:38:59 -06:00
teemuatlut
a8c446c3bc
[2.0.x]DUE: Fix includes for SDSUPPORT ( #9112 )
2018-01-10 00:46:34 -06:00
Thomas Moore
f7efac57b7
Multi-host support
2018-01-10 00:14:47 -06:00
Thomas Moore
dabb75034c
Update example configurations
2018-01-10 00:01:20 -06:00
Bob-the-Kuhn
6a50adb4d5
works
2018-01-09 22:15:33 -06:00
Scott Lahteine
5c076a6d93
Improved M915 description
2018-01-09 18:56:27 -06:00
Scott Lahteine
a94104dbb5
Merge pull request #9113 from teemuatlut/TMC_followup
...
[2.0.x]TMC followup
2018-01-09 18:46:35 -06:00
Dave Johnson
554e577676
SERIAL_STATS_* features not supported on USBCON targets ( #9127 )
2018-01-09 18:42:55 -06:00
Dave Johnson
2db666e99a
Enable USE_ZMIN_PLUG on SCARA example ( #9126 )
2018-01-09 18:41:28 -06:00
Scott Lahteine
7e000e6af4
More EEPROM field debugging ( #9123 )
2018-01-09 18:33:44 -06:00
GMagician
3a99dc7c5c
2.0.x Fix compiler warning ( #9116 )
...
Fix duplicate language define warning
2018-01-09 16:54:41 -06:00
GMagician
5295b4713d
[2.0.x] add semitec 104NT-4 ( #9119 )
...
Table is very very similar to old 104-GT2 so I added only the name and recycled old ID
2018-01-09 16:53:12 -06:00
teemuatlut
cdc61ebf53
Add M915 configuration option
2018-01-09 18:28:48 +02:00
teemuatlut
9d923c6c03
Fix TMC gcode commands
2018-01-08 18:45:05 +02:00
Scott Lahteine
99516572b1
Fix TMC current read from EEPROM
2018-01-07 20:48:46 -06:00
Tannoo
f26805e862
[2.0.x] UBL Mesh Storage Message ( #9095 )
2018-01-07 20:33:53 -06:00
Christopher Pepper
14dcad6bbc
LPC1768: Increase ADC median filter from 3 values to 23
...
Clarify the HAL_adc_get_result method to make sure correct values enter the filters
HAL: Fix the PID control loop for non-AVR platforms
2018-01-07 22:15:20 +00:00
Scott Lahteine
60d07f20e7
Make mbl.has_mesh() a method
2018-01-07 00:13:36 -06:00
Scott Lahteine
86818c9a89
Move MBL functions into the class
2018-01-07 00:13:36 -06:00
Unknown
bbb8d4c802
Set has_mesh if user issues G9 S3
...
Prevents user from having to manually run through entire manual leveling process only to enable mesh so they can manually restore their offline mesh backup
2018-01-06 21:07:07 -08:00
Scott Lahteine
2b5a9be49c
Fix M503 skew output
...
Followup to 19e75ccf86
2018-01-06 20:55:57 -06:00
Scott Lahteine
cf2922f164
Laser/spindle PWM off on M5
2018-01-06 15:29:22 -06:00
GMagician
5fb6dd1424
Bmp fix
...
Clockwise arrow fixed
2018-01-06 19:02:36 +01:00
Bob-the-Kuhn
cb0e826c5d
Merge pull request #9068 from Bob-the-Kuhn/SD-detect
...
[2.0.x] SD card detect improvement
2018-01-05 21:09:57 -06:00
Bob-the-Kuhn
f72b0a7b04
1234
2018-01-05 20:36:05 -06:00
Scott Lahteine
702c8acdd5
Settings FIELD_TEST fix
2018-01-05 19:13:30 -06:00
Scott Lahteine
e89f1453ab
UBL G29 works without settings.load()
2018-01-05 15:48:34 -06:00
Scott Lahteine
950be70a33
Add FIELD_TEST to validate storage
2018-01-05 15:48:34 -06:00
Scott Lahteine
760c912ab9
Add data size validation
2018-01-05 15:48:34 -06:00
Scott Lahteine
b91ca168fb
Add a struct defining EEPROM storage
2018-01-05 15:48:34 -06:00
Scott Lahteine
51e0f2bee3
Add MarlinSettings::validate()
2018-01-05 14:35:24 -06:00
Scott Lahteine
878f54c27b
Write filler with NO_VOLUMETRICS
2018-01-05 10:29:49 -06:00
Scott Lahteine
3ea6745b36
Pretty up TMC current write
2018-01-05 10:29:49 -06:00
Scott Lahteine
3319765034
Detab some HAL files
2018-01-05 10:28:17 -06:00
Scott Lahteine
1c41de16d4
Trailing whitespace clean
2018-01-05 10:11:31 -06:00
Scott Lahteine
1746a7352e
Merge pull request #9042 from thinkyhead/bf2_M701_M702
...
[2.0.x] Improved Pause/Load/Unload, M701-M702
2018-01-04 19:41:58 -06:00
Scott Lahteine
048d8a0158
CheapTRONIC v2.0 additions/revisions
...
Based on #9030
2018-01-04 18:00:25 -06:00
Roxy-3D
3a4e107b6b
use SERIAL_EOL(); instead of new line string
2018-01-04 16:20:18 -06:00
Roxy-3D
a5dfe08a81
Add precision to planner.xy_skew_factor so it doesn't print as 0.00
2018-01-04 16:14:09 -06:00
Roxy-3D
19e75ccf86
Add enough precision so planner.xy_skew_factor doesn't print as 0.00
2018-01-04 16:02:22 -06:00
Scott Lahteine
4fb60e1562
M702.cpp => M701_M702.cpp
2018-01-04 15:07:37 -06:00
Scott Lahteine
7541316bb4
Add M701/M702 Filament Load/Unload, M603
2018-01-04 15:07:37 -06:00
Scott Lahteine
81211da7b4
M701 / M702 language changes
2018-01-04 05:05:28 -06:00
Scott Lahteine
8704e533da
Apply FILAMENT_LOAD_UNLOAD_GCODES to example configs
2018-01-04 03:56:36 -06:00
Scott Lahteine
455592eee8
Improvements to LCD menu macros
2018-01-04 03:56:36 -06:00
Scott Lahteine
a80f2eea23
Group leveling reports for folding
2018-01-04 03:56:36 -06:00
Scott Lahteine
190cd0a111
Nozzle park args
2018-01-04 03:56:36 -06:00
revilor
0e93506985
Fix for issue #9005 , #8942 - Bed PID autotuning ( #9036 )
2018-01-04 03:26:14 -06:00
Bob-the-Kuhn
016e46a3c0
Merge pull request #9009 from Bob-the-Kuhn/Due-RRDFG-power-up-garbage
...
[2.0.x] Due - fix power up garbage on RRDFG LCD
2018-01-03 23:19:29 -06:00
studiodyne
31582caa07
2.0 Fix for bad Pause extruder position resuming ( #9029 )
2018-01-03 23:18:27 -06:00
Bob-the-Kuhn
4626d04067
as good as i can get it
...
minor edits to force new Travis test (last one timed out)
Update u8g_com_HAL_DUE_st7920_sw_spi.cpp
initial power up display garbage gone
2018-01-03 22:46:31 -06:00
Scott Lahteine
4af3d436b2
M303 pid autotune cleanup, commentary
2018-01-03 21:30:45 -06:00
Bob-the-Kuhn
e5b71af8c9
snapshot
...
found a few more nasties
2018-01-03 10:41:23 -06:00
Scott Lahteine
724e3f33bc
Merge pull request #9001 from Tannoo/(2.0.x)_LCD_EEPROM_init_fix
...
[2.0.x] EEPROM init fix
2018-01-03 05:47:01 -06:00
revilor
959a2d2527
Add beginTransaction to HAL SPI ( #9019 )
2018-01-03 05:12:25 -06:00
Tannoo
e43f3ac989
EEPROM init fix
2018-01-03 04:31:01 -06:00
Scott Lahteine
fc67c64b8f
Merge pull request #8989 from tcm0116/2.0.x_ubl
...
[2.0.x] Fix UBL compilation warnings
2018-01-02 21:38:45 -06:00
Thomas Moore
8afc4f8d9d
Fix UBL compilation warnings
2018-01-02 21:00:06 -06:00
Bob-the-Kuhn
eca5cc8669
Merge pull request #9003 from Bob-the-Kuhn/Due-PINS_DEBUG-&-related
...
[2.0.x] add Due PINS_DEBUG support & misc improvements (replaces PR #8990 )
2018-01-02 18:47:53 -06:00
Bob-the-Kuhn
e9fc7bc69c
Merge pull request #9000 from Bob-the-Kuhn/2.0-LCD-contrast
...
[2.0.x] lcd_contrast type mismatch work around
2018-01-02 18:46:31 -06:00
Bob-the-Kuhn
5574fad69c
copy of PR #8991 code
...
Formatting tweaks
correct array initialization & remove test code
2018-01-02 11:17:46 -06:00
Scott Lahteine
d190c702de
Add MKS_BASE Microstepping pins
...
Based on #9008
2018-01-01 18:49:21 -06:00
Scott Lahteine
5e01ee8adf
Temperature updates for parity with 1.1.x
2018-01-01 18:29:08 -06:00
Bob-the-Kuhn
adb9ecf3cc
copy of PR #8990
2018-01-01 16:11:56 -06:00
Roxy-3D
39e5fabfa9
Z BabyStepping should not be dependent on a bed leveling system being active
2018-01-01 14:46:50 -06:00
Bob-the-Kuhn
ef911a2d12
works
2018-01-01 14:35:16 -06:00
Scott Lahteine
d80c4f1a6e
Fix typo in delta call to buffer_line
...
Fix #8901
2017-12-31 01:40:07 -06:00
Scott Lahteine
9312ee63b0
Merge pull request #8979 from thinkyhead/bf2_sync_up_configs
...
[2.0.x] Synchronize configs with 1.1.x
2017-12-31 01:15:43 -06:00
Scott Lahteine
41dfb229ec
Merge pull request #8978 from thinkyhead/bf2_slimming_option
...
[2.0.x] SLIM_LCD_MENUS option
2017-12-31 00:56:29 -06:00
Scott Lahteine
3dd04736c0
Update M17_M18_M84.cpp
2017-12-31 00:26:45 -06:00
Scott Lahteine
2929c9e56f
A specific option to SLIM_LCD_MENUS
2017-12-31 00:11:22 -06:00
Scott Lahteine
10edb469bb
Apply SLIM_LCD_MENUS to example configs
2017-12-31 00:11:21 -06:00
Scott Lahteine
5294fd132f
Merge pull request #8924 from ejtagle/bugfix-2.0.x
...
[2.0.x] Improve SW SPI for DUE a bit more
2017-12-30 23:32:46 -06:00
Scott Lahteine
0b4a46fa6c
Bring configs up to date with 1.1.x
2017-12-30 23:28:53 -06:00
Scott Lahteine
7cc2193bce
Add Tronxy X1 example config ( #8972 )
2017-12-30 17:25:31 -06:00
etagle
729a9f55fc
Improved Sw SPI on DUE HAL a bit more.
...
Now the USB MSD can transfer at 750k/s. Previously, it was 500k/s. I think this is the maximum achievable speed using Sw SPI.
2017-12-30 17:24:38 -06:00
Scott Lahteine
615146c069
Enqueue commands better in ultralcd.cpp
2017-12-30 04:44:59 -06:00
Scott Lahteine
9686ffedef
Single pause flag also indicates SD print pause
2017-12-30 04:44:59 -06:00
Scott Lahteine
6d94bbf618
Apply some PGM_P pointers
2017-12-30 04:03:17 -06:00
Bob-the-Kuhn
cba44128d5
fix include
2017-12-29 10:08:30 -06:00
Scott Lahteine
427df8792d
Fix Capabilities Report
2017-12-28 21:08:59 -06:00
Scott Lahteine
2526ac6500
Display up to 3 extruders on char LCD
...
…and show bed level indicator at the position of the [H] icon, when a heated bed exists.
2017-12-28 20:17:42 -06:00
Scott Lahteine
db32c185ae
Merge pull request #8860 from Bob-the-Kuhn/2.0.x-DUE-RRDFGSC
...
[2.0.x] DUE - update for Reprap Discount Full Graphic Smart Controller
2017-12-27 05:06:49 -06:00
Scott Lahteine
9ecdd1f4c7
Multi extruder support for M600 and LCD
2017-12-27 04:33:25 -06:00
Scott Lahteine
a1ce6e8ff4
Clear lcd_clicked immediately on use
2017-12-26 22:26:04 -06:00
Scott Lahteine
5effe1590c
Fix NO_VOLUMETRICS bug
2017-12-26 20:04:44 -06:00
Scott Lahteine
f163eede78
No sub-menu if NO_VOLUMETRICS
...
For parity with #8911
2017-12-26 18:28:42 -06:00
Scott Lahteine
2c4e03d2cf
Indentation of a SW SPI file
2017-12-25 09:34:43 -06:00
Scott Lahteine
1a827d5b68
Opening brace tweaks
2017-12-25 09:34:43 -06:00
Bob-the-Kuhn
a142fab155
Enable RRDFGSC on Due
2017-12-25 09:22:14 -06:00
Scott Lahteine
b259bb4670
Fix tmc_util global vars
2017-12-25 09:05:31 -06:00
Scott Lahteine
4ef965cc40
Fix compiler warnings
2017-12-25 08:53:01 -06:00
Scott Lahteine
9e8008c49c
Fixes for G29, esp. 3POINT
2017-12-25 08:37:27 -06:00
Scott Lahteine
026e301307
lcd_map_control deps on ULTIPANEL
2017-12-25 07:46:25 -06:00
Scott Lahteine
f2731c9f93
Allow consecutive uses of G29
2017-12-25 06:32:33 -06:00
Scott Lahteine
4b49ea1e92
General cleanup of config-store, reset_bed_level
2017-12-25 05:16:01 -06:00
Scott Lahteine
2925852244
Fix GT2560 A+ servo pin
2017-12-25 02:18:56 -06:00
Scott Lahteine
c6354fa153
Tweak M125 code
2017-12-25 01:39:55 -06:00
Scott Lahteine
3b51f5c67e
Add pause/resume action to example configs
2017-12-25 01:39:18 -06:00
Scott Lahteine
f704f405af
Add pause/resume actions on M600, M125
2017-12-25 01:39:18 -06:00
Thomas Moore
f0a8a1a853
[2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE ( #8866 )
...
* Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
2017-12-25 01:38:06 -06:00
Scott Lahteine
705ea98fd3
Comment return false in motion functions
2017-12-24 22:57:15 -06:00
Scott Lahteine
50366b00d5
Tweak cleaning buffer / SD finished command
2017-12-24 20:35:05 -06:00
Scott Lahteine
28fc8741d6
Reduce default jerk. XY by half. Z by 1/4
2017-12-24 19:54:11 -06:00
Bob-the-Kuhn
1a948cbd93
Fix SET_OUTPUT glitch - LPC1768 & DUE
2017-12-24 19:25:32 -06:00
Scott Lahteine
869c89d83f
Merge pull request #8865 from thinkyhead/bf2_more_scara_scaling
...
[2.0.x] SCARA Feedrate Scaling for G2/G3 - using HYPOT
2017-12-24 19:18:13 -06:00
Scott Lahteine
1cf1cf8759
Add RADDS_DISPLAY to example configs
2017-12-24 19:00:23 -06:00
Even
ea1a8d1223
add original RADDS LCD + Controller
...
adds setup for the original Radds Display+Controller+SD Card Reader PCB
http://doku.radds.org/dokumentation/lcd-display/
2017-12-24 19:00:23 -06:00
Scott Lahteine
4a8fd8ae92
Merge pull request #8853 from ejtagle/bugfix-2.0.x
...
USB Mass Storage Implementation / CDC with HW flow control and misc fixes and improvements for Arduino DUE/RE-ARM based boards
2017-12-24 18:50:28 -06:00
Scott Lahteine
aa97cd6e9b
Merge pull request #8871 from petrzjunior/bugfix-2.0.x
...
[2.0.x][Language] Update Czech for Dec 2017
2017-12-24 18:48:59 -06:00
Thomas Moore
2917d1217d
Revert "Followup to #8698 "
...
This reverts commit 4e891e9fb7
2017-12-23 17:00:33 -06:00
Petr Zahradník
69a51a426c
Update Czech language Dec 2017
2017-12-22 19:35:09 +01:00
Scott Lahteine
caa5093498
General DELTA_IK macro
2017-12-21 22:41:57 -06:00
Scott Lahteine
c694608450
Apply SCARA_FEEDRATE_SCALING to G2/G3
2017-12-21 22:33:27 -06:00
Scott Lahteine
97d509d4d2
Revert "Improved Core-compatible jerk code"
...
Reverting commit 3cd7659
2017-12-21 16:54:30 -06:00
Scott Lahteine
5bc2acc072
Restore position_float to fix LIN_ADVANCE
2017-12-21 16:45:46 -06:00
etagle
33a6fc70e4
Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)
2017-12-21 02:42:46 -03:00
etagle
d8a4db72ac
Reimplemented SW SPI for DUE in assembler. This allows to reach 12Mhz as SPI Clock and improves 4x the transfer speed to the SD card. This is REQUIRED so access to SD from USB is usable (allows 600Kbytes/second transfer speeds)
2017-12-21 02:35:49 -03:00
etagle
99b2fc2066
Adjusted timings on the ST7290 u8glib so RE-ARM and RAMPS4DUE have no problems when writing to the graphics LCD. This fixes Issue #8787 - Special thanks to Bergerac56 for testinf this out !!!
2017-12-21 02:33:22 -03:00
etagle
498ea7512a
Exposed SDCard interface to the public, to USB MSD is able to read/write sectors on the SD card
2017-12-21 02:30:18 -03:00
etagle
9aff55ed1f
Backported latest improvements and fixes from the SdFat liibrary to our own version. This includes support for CRC7 validation on commands and also, made sure that even if using software SPI implementations, SD card speed is properly adjusted when transitioning from INITIALIZATION to DATA TRANSFER mode. ALL HALs implement spiInit, even in SW SPI mode, and we NEED this change to improve 25x the transfer speed of the SD card and allow implementations of USB MSD
2017-12-21 02:29:00 -03:00
etagle
7447979110
Fixed some warnings on the MakerParts configuration, when compiling using the AVR toolchain (integer overflow on the preprocessor calculations)
2017-12-21 02:23:24 -03:00
etagle
b6f9c333d4
Adding hooks into the idle loop so HALs can execute 2nd plane tasks, such as serving SD card read/writes requested from the USB MSD layer
2017-12-21 02:22:08 -03:00
victorpv
2ec4113cb2
Changes to STM32F1 HAL ( #8833 )
...
Some to correct missing files from previous PR to completely avoid
HardwareTimer Class (reduce overhead). Some changes to formatting.
Changes to DMA ADC to work correctly.
Change to F1 sanity check.
2017-12-20 16:16:36 -06:00
Scott Lahteine
913d9e9a59
Matching sign across filwidth vars
2017-12-20 00:17:19 -06:00
Scott Lahteine
3cde4c78b2
Use wildcard *.cpp in Makefile
...
Based on #8738
Addressing #8731
2017-12-19 23:44:46 -06:00
Scott Lahteine
fdc5e72720
A single setting to validate filament width
2017-12-19 21:33:25 -06:00
Scott Lahteine
93a6a4e1a8
Add VOLUMETRIC capability item
2017-12-19 20:11:23 -06:00
Scott Lahteine
933f76fda3
Option to disable all volumetric extrusion
2017-12-19 19:51:25 -06:00
Scott Lahteine
31e33d2acd
Add NO_VOLUMETRICS to example configs
2017-12-19 19:51:25 -06:00
Scott Lahteine
fc9ee1a4de
Fix up serial sanity check
2017-12-19 19:11:43 -06:00
Scott Lahteine
de5ca96654
More parity with 1.1.x, plus whitespace
2017-12-19 18:36:16 -06:00
Scott Lahteine
a891d8d738
Merge pull request #8820 from thinkyhead/bf2_mks_sbase_spi
...
[2.0.x] Fix SDSUPPORT for MKS SBASE
2017-12-17 21:15:49 -06:00
Scott Lahteine
097a26007f
Fix SDSUPPORT for MKS SBASE
...
Fix supplied by @cjsoong in https://github.com/MarlinFirmware/Marlin/issues/8750#issuecomment-350779983
2017-12-17 03:05:33 -06:00
Scott Lahteine
8df5955da4
Revert "Reset timer count before first block step"
...
This reverts commit 5cf6a062e3
2017-12-17 02:37:35 -06:00
Scott Lahteine
957bbab57f
Update inc files for parity with 1.1.x
2017-12-16 20:20:06 -06:00
Scott Lahteine
f79026acc1
Apply MKS_12864OLED_SSD1306 to examples
...
Followup to #8814
2017-12-16 20:15:36 -06:00
Dan Delaney
b055d8c39c
[2.0.x] Adding support for using the MKS_12864OLED with the SSD1306 controller ( #8814 )
...
* Adding support for using the MKS_12864OLED with the SSD1306 controller
* Update comment for correct controller type
2017-12-16 18:47:04 -06:00
Scott Lahteine
15d05748df
Adding support for the Tronxy and Zonestar LCD
2017-12-15 19:13:52 -06:00
Scott Lahteine
9abbcc3ee0
Apply ZONESTAR_LCD to example configs
2017-12-15 19:11:02 -06:00
Dave Johnson
aed0cfa3d1
Various fixes for 2.0.x configs
2017-12-15 17:09:46 -06:00
Scott Lahteine
674deaf223
Add NANODLP_ALL_AXIS to config examples
2017-12-15 16:22:56 -06:00
robpower
5595098063
V2 Extended NanoDLP_Z_Move_Sync to G4 & G28,Added all axis option.
2017-12-15 16:22:55 -06:00
Scott Lahteine
2b7db90340
Bring Malyan M200 config up to date
2017-12-15 15:47:22 -06:00
Scott Lahteine
8b12371e45
Change some hex case
2017-12-15 15:47:22 -06:00
Scott Lahteine
4782acf60e
Merge pull request #8780 from fiveangle/bf2-typo
...
[2.0.x] typo in Marlin.cpp
2017-12-15 15:25:41 -06:00
teemuatlut
0cd1e91056
[2.0.x] TMC driver update ( #8769 )
2017-12-15 15:03:14 -06:00
Scott Lahteine
09d13f186f
Correct unskew, after all
2017-12-15 14:24:20 -06:00
Dave Johnson
0d531d9655
Missing HAS_HEAT_BED conditional
...
Fixes issue found in #8779
2017-12-15 11:33:37 -08:00
Dave Johnson
69efb87d19
typo in Marlin.cpp
2017-12-14 08:20:45 -08:00
Scott Lahteine
368c124de8
Fix Planner::unskew parity with skew
2017-12-13 17:46:48 -06:00
Scott Lahteine
cf2193c07f
Comment, fix filament width sensor
2017-12-13 02:32:34 -06:00
Scott Lahteine
a641992c1d
Merge pull request #8762 from victorpv/patch-2
...
[2.0.x] STM32F1 HAL: Fix issue #8585 . Updates to readme.
2017-12-12 18:28:18 -06:00
Eduardo José Tagle
ac168a03c8
Fixes for the Arduino DUE HAL (Serial Port, Graphics Display, EEPROM emulation) ( #8651 )
...
* Fixing the DUE serial port assignments: Now -1 means the SAM3x USB Device emulating a serial port, and 0 means the USB to serial adapter included as a programming port
* Improving the Fast IO port access implementation on Arduino DUE
* Implemented EEPROM emulation on Due by storing data on the internal FLASH (with wear leveling)
* Implemented a Software SPI for the ST7920 graphics display for the Arduino RAMPS for DUE, as the default one in u8glib is clocking data too fast on ARM, and the display does not understand it.
* Fixing the case where the serial port selected is the USB device
* Adding configuration for the Makerparts 3D printer (www.makerparts.net)
* Tuned MakerParts acceleration on X and Y axis so it never loses steps. Also adjusted pulses per mm to match default hw configuration
* Fine tuned Maximum acceleration for MakerParts printer
* Style cleanup
* Style cleanup (2)
* Style fixes (3)
* Fixing the DUE serial port assignments: Now -1 means the SAM3x USB Device emulating a serial port, and 0 means the USB to serial adapter included as a programming port
* Improving the Fast IO port access implementation on Arduino DUE
* Implemented EEPROM emulation on Due by storing data on the internal FLASH (with wear leveling)
* Implemented a Software SPI for the ST7920 graphics display for the Arduino RAMPS for DUE, as the default one in u8glib is clocking data too fast on ARM, and the display does not understand it.
* Fixing the case where the serial port selected is the USB device
* Adding configuration for the Makerparts 3D printer (www.makerparts.net)
* Tuned MakerParts acceleration on X and Y axis so it never loses steps. Also adjusted pulses per mm to match default hw configuration
* Fine tuned Maximum acceleration for MakerParts printer
* Style cleanup
* Style changes to u8g_dev_st7920_128_64_sw_spi.cpp
* Even more improvements to the FastIO HAL for DUE. Now WRITE() is 2 ASM instructions, if value is constant, and 5 cycles if value is not constant. Previously, it was 7..8 cycles
* After some problems and debugging, seems we need to align the interrupt vector table to 256 bytes, otherwise, the program sometimes stops working
* Moved comments out of macro, otherwise, token pasting does not properly work sometimes
* Improved Software SPI implementation on DUE: Now it honors the selected speed passed to spiInit(). This allows much faster SDCARD access, improving SDCARD menus and reducing latency
* Update u8g_dev_st7920_128_64_sw_spi.cpp
* Disabling EEPROM over FLASH emulatiion if an I2C or SPI EEPROM is present
2017-12-12 17:51:36 -06:00
victorpv
084f2434a7
Update readme.md
2017-12-11 23:14:13 -06:00
victorpv
7c7ae5ebef
Delete duplicated file.
2017-12-11 23:10:44 -06:00
victorpv
4feffca178
fix for issue #8585
...
As reported in this issue:
https://github.com/MarlinFirmware/Marlin/issues/8585
I have it working fine in my local copy like that change.
2017-12-11 23:07:39 -06:00
Scott Lahteine
d568e586b7
Fix up ubl_motion indentation
2017-12-11 03:08:45 -06:00
Scott Lahteine
24f9bec6f4
UBL + DUAL_X_CARRIAGE compatibility
2017-12-11 03:08:18 -06:00
Scott Lahteine
6d0678d963
Omit unused UBL motion code
2017-12-11 03:08:18 -06:00
Scott Lahteine
3255712343
Skew Correction for UBL
...
Also remove unused grid slicing function when using UBL segmented.
2017-12-11 03:08:15 -06:00
Scott Lahteine
3d796d8040
Move debug code
2017-12-11 00:27:06 -06:00
Scott Lahteine
3db5303bfe
_buffer_line => buffer_segment
2017-12-11 00:27:06 -06:00
Scott Lahteine
a71d2f3f40
UBL_DELTA => UBL_SEGMENTED
2017-12-11 00:27:06 -06:00
Scott Lahteine
73e32925e4
References are better for array args
2017-12-11 00:27:06 -06:00
Scott Lahteine
125c572d97
Tweak M114 detail
2017-12-11 00:27:06 -06:00
victorpv
a5150c83a2
[2.0.x] Multiple updates to STM32F1 HAL ( #8733 )
...
* STM32F1 HAL
Adding files for STM32F1 HAL based on libmaple/stm32duino core.
Current persistent_store uses cardreader changes to be sent in separate
commit, but could be changed to use i2c eeprom.
There is another persistent_store implementation that uses the MCU flash memory
to emulate eeprom
Adding readme with some information about the stm32 HAL.
* Switch to Timer4 to avoid a hard reset on STM32F103C6 boards
On bluepill STM32F103C6 boards, using Timer5 results in a error() vector call. Switch to 4 since these are both general purpose, 16 bit timers.
* Add support for EEPROM emulation using Flash
Some low end machines doe not have EEPROM support. Simulate it using the last two pages of flash. Flash does not allow rewrite between erases, so skip writing the working version if that's enabled.
* Basic Pins for a malyan M200
This is a work in progress to go hand in hand with the STM32 work.
* Add support for ADC with DMA. This work has exposed a problem with the pin enumerations in STM boards vs what marlin expects (i.e, try defining PA0 as a temp pin). The hack can be removed with we go to fastio completely. To see this work, set something in adc_pins to a value like PA0 and connect your pullup resistor'd thermistor.
* Missing file - change HAL_adc_init to actually do something
We have an actual ADC init function now.
* Remove pinmode hack
Remove the pin mode hack that I was using to init PA0.
Updated Readme.md
* Several changes to timers and GPIO
Faster GPIO, and faster timer functions by accesing registers and
libmaple.
Still more changes pending for the Timer's code to skip using the
HardwareTimer class altogether.
Switch all enums to be within #defines
This change allows a user to have, for instance, TEMP_4 and TEMP_BED definied but nothing else. The enums which are not defined move "out", allowing the first ones to take the slots in the enum, and since the array is sized on ADC_PIN_COUNT, we always have the right size data and in order.
* Update Malyan M200 pins
Update Malyan M200 pins with correct fan values.
* Test all pins on actual hardware, update definitions
Some of the pin definitions were from knowlege base/pdfs. Now they've been tested against actual hardware. This should be very close to final.
* Update HAL_timers_Stm32f1.cpp
* Add sample configurations for Malyan M200
Add sample configuration for Malyan M200 without bed leveling, and move fan to auto cool E0 since this printer by default has only one fan.
Choose the timer based on MCU defintion. Timer5 is not valid on C8/CB class boards, so use Timer4 for the step timer.
readme.md update
* Updates to timers, and some stm32 boards definitiions
* Correct pin toggle macro.
* Remove duplicated Malyan M200 entry from pins.h
* Update configuration_store.cpp
* Formatting, indentation
* Formatting in HAL_Stm32f1.cpp
2017-12-10 23:12:45 -06:00
Scott Lahteine
204199e1ce
Only compare XYZ to check motion
2017-12-10 23:00:00 -06:00
Scott Lahteine
6686d937fb
Always report position on config load/reset
2017-12-10 21:47:14 -06:00
Scott Lahteine
117fc872a7
Update current position in M852
2017-12-10 21:39:49 -06:00
Scott Lahteine
7d2e850577
Have M420 report a changed position
2017-12-10 21:39:49 -06:00
Scott Lahteine
03ba79f144
Sync and report changed position
2017-12-10 21:39:49 -06:00
Scott Lahteine
5cf6a062e3
Reset timer count before first block step
2017-12-10 18:38:53 -06:00
Scott Lahteine
6149b82119
Allow setting current timer counter
2017-12-10 18:38:53 -06:00
Scott Lahteine
82ef6b5242
Add an option to specify "pulse" timer
2017-12-10 18:38:53 -06:00
Scott Lahteine
b8bc965414
General cleanup HAL timers
2017-12-10 18:38:52 -06:00
Scott Lahteine
69d49a2438
Shorter segments may be better
2017-12-09 06:29:14 -06:00
Scott Lahteine
d576f5408e
Add MiniRAMBo 1.0a board
2017-12-08 23:42:16 -06:00
Scott Lahteine
c40cb52342
Use MB() for Megatronics 3.1
2017-12-08 23:42:16 -06:00
Scott Lahteine
4fa65a5c25
TCNT0 => HAL_timer_get_current_count
...
Fix #8710
2017-12-08 22:35:28 -06:00
AnHardt
b3daf6b5db
[2.0.x] better reverse pass ( #8722 )
...
* repair reverse_pass()
And make it readeble.
This was broken a long time ago.
Not competely unfunctional but far from optimal.
* Minor speedup when calling calculate_trapezoid_for_block
2 float / to 1 foat / and 2 float *
* Various style changes
2017-12-08 21:38:45 -06:00
Roxy-3D
f58eb391aa
[2.0.0] Better off mesh behavior for UBL ( #8714 )
...
* Better off mesh behaviour for UBL
* Suggested ubl.h changes
2017-12-08 19:00:59 -06:00
Jonathan Barchi
cffd052fee
[2.0.x] Fix for #8604 ( #8717 )
...
* Nozzle.cpp: replace incorrect M_2_PI (2/pi) with 2.0 * M_PI
* Use RADIANS(360) instead of 2 * M_PI
2017-12-08 18:50:05 -06:00
Bob-the-Kuhn
65d0f32f82
divide only when required
2017-12-08 18:14:27 -06:00
Scott Lahteine
728acf521c
Followup to #8706
2017-12-08 03:49:33 -06:00
Scott Lahteine
85c6ffbe0d
Discard all "continued" blocks on interrupted move
2017-12-08 02:32:58 -06:00
Scott Lahteine
4e891e9fb7
Followup to #8698
2017-12-08 01:01:12 -06:00
Scott Lahteine
de3d3b9cb1
Put FORCE_INLINE before static
2017-12-08 00:46:22 -06:00
Scott Lahteine
43ea265b78
Merge pull request #8685 from MateuszKrawczuk/patch-3
...
Update TEMP_BED_PIN in MIGHTYBOARD_REVE
2017-12-07 21:50:35 -06:00
Scott Lahteine
ae663a4198
PROBE_DOUBLE_TOUCH => MULTIPLE_PROBING
2017-12-07 16:44:13 -06:00
Scott Lahteine
d7800e7975
Apply MULTIPLE_PROBING to example configs
2017-12-07 16:44:12 -06:00
Scott Lahteine
542efda7db
Merge pull request #8698 from thinkyhead/bf2_replace_jerk_code
...
[2.0.x] Improved Core-compatible jerk code
2017-12-07 00:17:00 -06:00
Scott Lahteine
3cd7659924
Improved Core-compatible jerk code
2017-12-06 23:57:57 -06:00
GMagician
99fcf60977
[2.x] addressing #8644
...
Removed missing include file
2017-12-06 23:49:30 -06:00
Scott Lahteine
81c0a918af
feed_factor => inverse_secs
2017-12-06 23:03:33 -06:00
Scott Lahteine
f206b81cf7
Sanity check skew+UBL
2017-12-06 22:56:58 -06:00
Scott Lahteine
9898b96992
No lcd_map_control flag in quick_stop
2017-12-06 22:23:34 -06:00
Scott Lahteine
840289e7cc
Use block cleaning instead of split flag
2017-12-06 22:22:58 -06:00
Scott Lahteine
90cf6a06be
Simplify G26 user_canceled
2017-12-06 22:02:54 -06:00
Scott Lahteine
cdfabbc507
Shorten error text in G29
2017-12-06 21:50:54 -06:00
Scott Lahteine
c846388a65
Standardize LCD interface code for UBL a little
2017-12-06 21:50:54 -06:00
Scott Lahteine
2fde60da12
Changes for parity with 1.1.x
2017-12-06 21:50:54 -06:00
Scott Lahteine
6040d4080e
Cleanup stepper ISR. Allow cleaning for endstops.
2017-12-06 21:23:37 -06:00
Scott Lahteine
a4e1d83599
Fix M503 S parameter
2017-12-06 21:23:37 -06:00
Scott Lahteine
a3b098b4be
Whitespace clean
2017-12-06 14:02:44 -06:00
AnHardt
a993c5227d
Don't split first_move while homing or probing
...
While homing or probing it might be bad if the stop/trobe triggers during the first part and the second is still in the buffer.
2017-12-06 14:13:05 +01:00
Mateusz Krawczuk
5320906b0b
Update TEMP_BED_PIN in MIGHTYBOARD_REVE
...
Pin K7 number in fastio1280.h is 69, but it's also ADC15 pin.
To get correct value from ADC reading it should be set as 15.
2017-12-06 12:07:20 +01:00
Scott Lahteine
aeb5c623c1
Show "Level Bed Corners" with UBL too
...
Addressing #8676
2017-12-05 21:58:43 -06:00
Scott Lahteine
5fbb2f121e
Remove skew warning that could crash the planner
2017-12-05 20:27:20 -06:00
Richard Wackerbarth
c1184552ac
Change K1 to required option PID_K1
2017-12-05 19:59:59 -06:00
revilor
9e3fbcf35c
fix for #8669 ( #8679 )
...
* fix for #8669
* Update G28.cpp
2017-12-05 19:40:36 -06:00
Scott Lahteine
d8b444c144
Cleanup constextpr in planner.cpp
2017-12-05 18:55:57 -06:00
Scott Lahteine
a2372cfab5
Fix SKEW_CORRECTION without leveling
2017-12-05 18:48:34 -06:00
Scott Lahteine
4d3c3d0b73
Some ST7920 parity with 1.1.x
...
Possibly more should be brought over? Discussion at #8471
2017-12-05 02:22:36 -06:00
Scott Lahteine
3748c28924
Fix MBL G29 without LCD
...
Addressing https://github.com/MarlinFirmware/Marlin/pull/8575#discussion_r154536617
2017-12-05 01:57:45 -06:00
Scott Lahteine
772298257b
Creality pins spacing, MINIPANEL CS pin
2017-12-05 01:57:45 -06:00
Scott Lahteine
b27bc67271
Set initial endstops state
2017-12-05 01:10:31 -06:00
Scott Lahteine
b6ba32ce75
Support for RAMPS Plus (3DYMY)
2017-12-05 00:42:21 -06:00
Scott Lahteine
53694ebaa1
Folllwup to planner splitting
2017-12-04 18:55:23 -06:00
Scott Lahteine
37fff608b0
Merge pull request #8652 from fiveangle/bf2_usbcon_xonxoff
...
[2.0.x] SERIAL_XON_XOFF not supported on USB-native AVR devices
2017-12-04 16:46:18 -06:00
Scott Lahteine
4b612f590c
Split first move to planner for better chaining
2017-12-04 15:27:47 -06:00
Unknown
91b63f6d69
SERIAL_XON_XOFF not supported on USB-native AVR devices
...
User could enable SERIAL_XON_XOFF on USB-native devices and it would not be enabled without warning, but M115 would report the capability as available.
2017-12-04 03:57:01 -08:00
Bob-the-Kuhn
57fac33a74
add explanations
...
1) add explanations as to why software SPIs are selected
2) remove unused flag/option
2017-12-03 20:32:22 -06:00
Bob-the-Kuhn
bb23286383
add README & modify spi_pins.h
...
still trying to fix file name
2017-12-03 20:00:56 -06:00
Scott Lahteine
dd8febca1a
Revert "Merge pull request #8611 from thinkyhead/bf2_planner_split_first"
...
This reverts commit 824980e70eaa7efb96bf
2017-12-03 17:50:19 -06:00
Bob-the-Kuhn
fb44f8e50f
Merge pull request #8616 from hg42/bugfix-2.0.x
...
[2.0.x][LPC1768][FIX] NUM_DIGITAL_PINS was negative, fixes PWM, arduino io functions, M42, M43, M226, probably also Servo, some LCD, soft spi, SoftwareSerial, ... may be others
2017-12-03 14:48:00 -06:00
Bob-the-Kuhn
4c5356f77a
Merge pull request #8622 from hg42/implement-LPC1768-GET_TIMER
...
[2.0.x][LPC1768][fix] Implement GET_TIMER and other GET_xxx, fixes PWM
2017-12-03 14:46:22 -06:00
Harald Gutsche
f5b4e1ef4f
as a workaround enable PWM for any pin, see PR #8622
2017-12-03 20:37:02 +01:00
Scott Lahteine
6e944a413c
Merge pull request #8607 from benlye/patch-1
...
[2.0.x] Fix M49 so that it does not hang the terminal console
2017-12-03 03:41:33 -06:00
Scott Lahteine
967522b95e
Merge pull request #8615 from dot-bob/Duplicator_6-2.0.x
...
[2.0.x] Example configurations for Wanhao Duplicator 6
2017-12-03 03:37:48 -06:00
Scott Lahteine
f4b16a3bac
Update M49.cpp
2017-12-03 03:34:56 -06:00
Scott Lahteine
f9327534f8
Merge pull request #8634 from fiveangle/bf2_report_xonxoff
...
[2.0.x] Report SERIAL_XON_XOFF in M115
2017-12-03 02:18:50 -06:00
Scott Lahteine
da9f140829
Merge pull request #8637 from thinkyhead/bf2_ubl_uses_LSL
...
[2.0.x] Use custom segment length for UBL Cartesian
2017-12-03 01:57:49 -06:00
Scott Lahteine
3a97de52ef
Split first move to planner for better chaining
...
Address #8573 , #8595
2017-12-03 01:27:14 -06:00
Scott Lahteine
24437de591
Use custom segment length for UBL Cartesian
2017-12-03 00:10:54 -06:00
Unknown
4c5ffd2349
[2.0.x] Report SERIAL_XON_XOFF in M115
...
-Report SERIAL_XON_XOFF in Extended Capabilites M115 report for hosts
-Remove outdated 256 size limitation from comments on RX_BUFFER_SIZE defines
-Update error message conditions
2017-12-02 21:08:06 -08:00
Scott Lahteine
aa7efb96bf
Bring configurations up to date
2017-12-02 21:50:51 -06:00
Scott Lahteine
63a91cd37a
Fix a homing comment
2017-12-02 21:02:37 -06:00
Scott Lahteine
8056120195
Rename inverse_mm_s => inverse_secs
2017-12-02 20:28:09 -06:00
Scott Lahteine
23557f8e77
Remove obsolete de_float
2017-12-02 20:23:10 -06:00
Jonathan Barchi
05f8e98c4a
Fix for issue #8629 - mismatch between number of stored and loaded dummy items on non-delta machines. ( #8631 )
2017-12-02 19:04:58 -06:00
Roxy-3D
48fb4e0932
Get Bi-Linear to work with G26
...
More corrections to make that happen...
2017-12-02 14:14:24 -06:00
Roxy-3D
0850b38b45
Get Bi-Linear working with G26
...
G26 uses logic that looks like:
```
ex = _GET_MESH_X(i + 1) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS));
```
The Bi-Linear macros need parenthesis to work correctly.
2017-12-02 14:10:30 -06:00
Scott Lahteine
000b3b3117
Comment/cleanup of motion code
2017-12-02 01:09:55 -06:00
Scott Lahteine
046a1ad331
Merge pull request #8625 from tcm0116/2.0.x-G33
...
[2.0.x] Fix missing return values in G33_auto_tune
2017-12-02 00:51:19 -06:00
Thomas Moore
b35c3b5eb8
Fix missing return values in G33_auto_tune
2017-12-01 21:29:16 -06:00
Scott Lahteine
45c2388a58
Apply const to thermal_runaway_protection args
2017-12-01 19:42:44 -06:00
Scott Lahteine
0154e3480c
New feature: BED_SKEW_CORRECTION
2017-12-01 19:39:49 -06:00
Scott Lahteine
082ab8fcab
Add SKEW_CORRECTION to example configs
2017-12-01 19:22:27 -06:00
Unknown
d1f11e9c10
fix missing GET_TIMER (used by PWM for Ex_AUTO_FAN)
2017-12-01 22:28:55 +01:00
Harald Gutsche
dd1b503f64
fix NUM_DIGITAL_PINS being negative for more than 127 digital pins
2017-12-01 07:39:46 +01:00
dot-bob
bd45d0363d
Add default configurations for the Wanhao Duplicator 6.
2017-11-30 23:24:33 -07:00
Scott Lahteine
91fb6231b2
Fix EEPROM V45 header, layout
2017-11-30 22:45:17 -06:00
Roxy-3D
94e6b2976e
Restore correct G26 values for gMax 1.5+ printer
2017-11-30 18:12:17 -06:00
Scott Lahteine
dd3ce40826
Drop Planner::position_float, use int types
2017-11-30 17:43:31 -06:00
Scott Lahteine
ec6ca37ed3
Fix (un)apply_leveling fade bug
2017-11-30 17:25:44 -06:00
Scott Lahteine
a52fec6ac4
Planner class parity with 1.1.x
2017-11-30 15:55:08 -06:00
Ben Lye
1f3ad461bc
Update M49.cpp
...
Fix M49 so that it does not hang the terminal console.
2017-11-30 20:17:44 +00:00
Scott Lahteine
e37dd64548
Apply LEDColor, language fixes
2017-11-29 23:58:12 -06:00
Scott Lahteine
8f90642eea
LED_CONTROL_MENU config changes
2017-11-29 21:02:56 -06:00
Tannoo
cf0f78336b
New Feature: LED_CONTROL_MENU
2017-11-29 21:02:55 -06:00
Scott Lahteine
23e45fa3c4
Apply const to some planner vars
2017-11-29 21:02:55 -06:00
Scott Lahteine
7c61bcb058
Apply SEGMENT_LEVELED_MOVES to example configs
2017-11-29 16:57:31 -06:00
Scott Lahteine
ef2531558c
Add an option to segment leveled moves
2017-11-29 16:57:30 -06:00
Scott Lahteine
285b868e9b
Tweak planner code style
2017-11-29 15:22:18 -06:00
Scott Lahteine
1f2acc33bc
Tweaks for check_axes_activity
2017-11-28 18:41:13 -06:00
Vitaliy Sapyanov
7f88334aa3
Done cleanup and removed duplicates in pins_RuRAMPS4D.h ( #8582 )
...
Remove duplicates, with followup fixes
2017-11-28 18:33:12 -06:00
Scott Lahteine
a8aa43ce2d
Merge pull request #8587 from AnHardt/2_Fix_WDTO_during_long_DELTA_moves
...
[2.0.x] Fix WDTO during long delta moves
2017-11-28 17:29:18 -06:00
Scott Lahteine
4793c34c53
Fix M290 boolval bug
...
Fix #8577
2017-11-28 17:21:33 -06:00
Scott Lahteine
16baa48699
Fix #8579
...
Fan speed code fell into a curly brace
2017-11-28 16:12:14 -06:00
AnHardt
02aa93a6ad
Fix Watchdog time out during long lasting DELTA moves
...
During long lasting moves of a delta machine neither the temperatures are maintained nor buttons checked nor ... .
The fix is to call 'manage_heater()' and 'idle()' every now and then in the loop where the move is segmented.
The code is abot the same as in G2_G3 wher we had the same problem with too large circles lasting too long.
Fixing #7510
2017-11-28 17:03:51 +01:00
Scott Lahteine
fadf9eb2d7
Simplify midpos calculation
2017-11-27 14:00:35 -06:00
Scott Lahteine
0880031e8e
Satisfy M702 dependencies
2017-11-27 13:39:59 -06:00
Scott Lahteine
0786b61ce7
Followup to #8575
2017-11-27 12:58:40 -06:00
Scott Lahteine
276271e72f
Make MBL work more like PROBE_MANUALLY
2017-11-27 02:12:29 -06:00
Scott Lahteine
94cb412e45
Allow override of probe bounds
2017-11-26 20:55:27 -06:00
Scott Lahteine
c8718aa111
Spacing, macros in LPC1768_PWM
2017-11-26 20:20:05 -06:00
Scott Lahteine
a67cf78c6b
Clean up whitespace, spacing
2017-11-26 20:18:52 -06:00
Scott Lahteine
f0dd4e3fa0
Bootscreen parity with 1.1.x
2017-11-26 20:07:17 -06:00
Scott Lahteine
b634bfe1b1
Tweak to readDir code
2017-11-26 18:25:00 -06:00
Scott Lahteine
7be4857ab9
Tweak BLOCK_BUFFER_SIZE description
2017-11-26 17:36:40 -06:00
Bob-the-Kuhn
7d8b66e207
Merge pull request #8570 from Bob-the-Kuhn/Sbase-PWM
...
[2.0.x] MKS Sbase - add servo pin definitions and add directly controlled PWM
2017-11-26 09:36:18 -06:00
Bob-the-Kuhn
59b32c25b5
MKS Sbase changes
2017-11-26 07:47:06 -06:00
Scott Lahteine
f90c075d1f
SD Menu patches
2017-11-26 01:14:18 -06:00
Scott Lahteine
9b64be0bc5
Fixes for leveling sub-menus
2017-11-26 00:05:36 -06:00
Scott Lahteine
25674da90c
Tweaks to do_blocking_move
2017-11-25 23:31:16 -06:00
Scott Lahteine
22b897e77d
Show M211 output with workspace offset
2017-11-25 20:48:20 -06:00
Scott Lahteine
d06e29846d
Loosen HAS_BED_PROBE definition
2017-11-25 20:11:21 -06:00
Roxy-3D
e48fcad615
change G26 and G29 bit function names to avoid HAL collision
2017-11-25 19:58:45 -06:00
Scott Lahteine
41ec449960
Fix G26 error return
2017-11-25 19:53:14 -06:00
Scott Lahteine
9badf5dc0d
Fix Micromake C1 config
2017-11-25 18:41:07 -06:00
Scott Lahteine
7576ad7fc2
Merge pull request #8554 from tcm0116/2.0.x-cleanup
...
[2.0.x] Fix for #8525 and other cleanup
2017-11-25 18:19:54 -06:00
Scott Lahteine
27c5692b13
Syntax tweaks
2017-11-25 18:13:36 -06:00
Scott Lahteine
d18d40e1d6
M290 report on change, P0 to leave Probe Z Offset alone
2017-11-25 16:47:39 -06:00
LVD-AC
65f365333f
[2.0.x] G33 probe error handling
2017-11-25 16:19:10 -06:00
Bob-the-Kuhn
8c69adba8b
Merge pull request #8553 from Bob-the-Kuhn/2.0.x-U8Glib-follow-up
...
[2.0.X] U8Glib follow up
2017-11-25 14:26:32 -06:00
Scott Lahteine
be00e421a7
Patch up M290, M851
2017-11-25 14:11:57 -06:00
Bob-the-Kuhn
fc40d56131
fixed error, updated defaults, added notes
...
Travis fix - only allow ultralcd_st7920_u8glib_rrd_AVR.cpp to compile when ST7920 selected
2017-11-25 12:35:03 -06:00
Roxy-3D
d29cb646e3
Fix erroneous reference to temperature in time calculations
...
Travis is having problems at: https://github.com/MarlinFirmware/Marlin/pull/8560
So... doing a direct commit to get things correct. Bugfix_v1.1.x does not have this bug. Nothing needs to be done to that branch.
2017-11-25 10:40:56 -06:00
Thomas Moore
7bb1721f35
Fix _BV already defined warnings for Teensy
2017-11-24 22:34:39 -06:00
Thomas Moore
5f9592a523
Cleanup narrowing warning in pin_is_protected
2017-11-24 22:15:56 -06:00
Thomas Moore
34eaaab5fb
Fix _BV already defined warnings
2017-11-24 21:59:31 -06:00
Thomas Moore
2ea779e560
Allow bed probe sanity checks to run
2017-11-24 21:59:01 -06:00
Scott Lahteine
d24b1190bd
Don't use Z_MIN_PROBE_ENDSTOP on DELTA
2017-11-24 18:24:22 -06:00
Scott Lahteine
e34c6827ea
Init MIXING virtual tools as switching
2017-11-24 18:02:09 -06:00
Scott Lahteine
a9ecb975b2
Apply LINEAR_UNIT to M503 output for M200
2017-11-24 17:32:48 -06:00
Scott Lahteine
d95ee0f003
Merge pull request #8551 from revilor/bugfix-2.0.x
...
MK2_MULTIPLEXER does not require E2/E3 stepper pins
2017-11-24 17:16:23 -06:00
Scott Lahteine
80ada58818
One fewer function call in probe_pt
2017-11-24 17:10:38 -06:00
oliver
92a0dc552a
MK2_MULTIPLEXER does not require E2/E3 stepper pins
2017-11-24 23:56:39 +01:00
Scott Lahteine
b49acce035
Tweaks for lcd_external_control
2017-11-24 15:53:25 -06:00
Scott Lahteine
1ef1052ae1
Phatter arrows for Z offset overlay
2017-11-24 15:53:25 -06:00
Scott Lahteine
5926c9c97b
Followup for MESH_EDIT_GFX_OVERLAY
2017-11-24 15:53:25 -06:00
Scott Lahteine
ab03a31cc9
Patch G0/G1 for NANODLP_Z_SYNC
2017-11-24 14:11:12 -06:00
Scott Lahteine
a766dfb3b1
Merge pull request #8536 from thinkyhead/bf2_nanodlp_z_move_sync
...
[2.0.x] Implement NANODLP_Z_SYNC for 2.0.x
2017-11-24 13:11:14 -06:00
Scott Lahteine
01e207213f
Fix MK2_MULTIPLEXER stepper indirection
2017-11-24 12:49:28 -06:00
Roxy-3D
ec04cf27d3
Fix the G26 out of scope identifiers in the v2.0.0 branch ( #8543 )
...
These changes may need to be warmed over. I tried to fix things with
the least amount of disruption. I just wanted to get the bugfix_v2.0.0
branch working for people again.
2017-11-24 10:39:56 -06:00
Scott Lahteine
dc82babe8e
Implement NANODLP_Z_SYNC for 2.0.x
2017-11-24 00:28:06 -06:00
Scott Lahteine
c6b0c104bb
Adapt G26 to work for all meshes
2017-11-23 22:31:37 -06:00
Scott Lahteine
5ce7f23afa
Config option G26_MESH_VALIDATION for all meshes
2017-11-23 21:43:23 -06:00
Scott Lahteine
c19eb33408
Move G26 to gcode sub-folder
2017-11-23 21:43:23 -06:00
Scott Lahteine
a03f93bab4
Fix fan kickstart
2017-11-23 21:42:45 -06:00
Scott Lahteine
9e3c41f9e8
Tweak fan kickstart / speed code
2017-11-23 15:20:35 -06:00
GMagician
118ac61e59
[2.0.x] Tool change bad behaviour fix
...
Previous fix did not work as expected when axeis not homed. It raise Z but never return to original position
2017-11-22 20:24:03 -06:00
Scott Lahteine
c35d27f77c
Merge pull request #8299 from tcm0116/2.0.x-BIQU_BQ111-A4
...
[2.0.x] Add BIQU BQ111-A4 board
2017-11-22 19:16:04 -06:00
Scott Lahteine
1685cd193b
Tweak char_mode init
2017-11-22 19:12:08 -06:00
Scott Lahteine
9406c87a97
Fix up LCD init / charset
2017-11-22 18:22:55 -06:00
Thomas Moore
fa577392b2
Add BIQU BQ111-A4 board
2017-11-22 16:34:59 -06:00
Scott Lahteine
c2fc78c3a8
#ifndef => #if !PIN_EXISTS
2017-11-22 16:28:52 -06:00
Scott Lahteine
c613a1ed38
Fix indentation, stepper.h dependency, etc.
2017-11-22 14:55:30 -06:00
teemuatlut
f011a32771
Board definitions for Ultratronics Pro v1.0
2017-11-22 14:55:24 -06:00
Bob-the-Kuhn
9dad534f02
fixed
2017-11-21 21:37:20 -06:00
Scott Lahteine
4371345cbe
Don't re-init graphical LCD after boot screen
...
Followup to 13a3fb1acc
2017-11-21 18:23:39 -06:00
Scott Lahteine
56c02b7f59
Shift register buttons question
...
Can LCD shift registers keep up with faster MCUs?
2017-11-21 16:12:40 -06:00
Scott Lahteine
3994d3b935
General cosmetic LCD
2017-11-21 16:12:40 -06:00
Scott Lahteine
617993d0ea
Patch for !!TEST (was _BV once?)
2017-11-21 16:12:08 -06:00
Scott Lahteine
3269d8dd62
Tweak M42 var
2017-11-21 16:12:08 -06:00
Mateusz Krawczuk
bb1a6eea88
Remove pin count check for MIGTHYBOARD_REVE
...
Remove assert and unused code since it is implemented in pinsDebug_plus_70.h
2017-11-21 14:38:02 +01:00
Scott Lahteine
1ce0fb336b
Patch Max7219_LED_Set input args
2017-11-20 21:15:15 -06:00
GMagician
a61127a421
[2.0.x] tool change bad behaviours
...
This will solve 2 issues on tool change.
1) when no home is done ("no_move" is set) tool change should never move X & Y because... I don't know where I am...only Z should be adjusted to avoid bed collision if other nozzle is lower than current.
Since no move no bed level matrix should be applied
2) When SWITCHING_NOZZLE is enabled and system is homed there are two movements to go to destination, but first can move Z to older position and then crash on the bed
2017-11-20 16:34:55 -06:00
Vitaliy Sapyanov
e2724c68ab
Update pins_RURAMPS4D.h
...
Add and bugfix pins
2017-11-20 15:36:13 -06:00
Scott Lahteine
9770062309
Merge pull request #8463 from thinkyhead/bf2_32bit_M42
...
[2.0.x] Updates to Anet A8 configurations
2017-11-20 15:12:30 -06:00
Scott Lahteine
3066655727
Try port*100+pin, fix config dependency
2017-11-20 13:58:23 -06:00
Scott Lahteine
ba8bc7ea80
Cosmetic tweaks
2017-11-20 13:58:02 -06:00
Scott Lahteine
f409147116
Fix P2_04, P2_05
2017-11-20 13:58:02 -06:00
Bob-the-Kuhn
a28ccabe2a
M42 P1.20 fix
2017-11-20 13:58:02 -06:00
Unknown
33912fa7e8
Update Temperature::setPwmFrequency prototype to match source
...
Introduced with #8446
2017-11-20 01:50:41 -08:00
Scott Lahteine
b9327a4d16
Misc. general cleanup
2017-11-19 15:43:39 -06:00
Scott Lahteine
8836623e0f
Fix sq/min/max macros after platform headers
2017-11-19 15:43:39 -06:00
Scott Lahteine
fe4f009fdd
32-bit unless…
2017-11-19 15:43:38 -06:00
Scott Lahteine
25af9decfe
Remove enum.h include of MarlinConfig.h
2017-11-19 15:43:38 -06:00
Scott Lahteine
1d4571b88d
Dependency adjustments
2017-11-19 15:43:38 -06:00
Scott Lahteine
550f1025f0
Try using <Arduino.h> everywhere
2017-11-19 14:23:02 -06:00
Scott Lahteine
c0000a0cdc
Move servo code to modules/servo.*
2017-11-19 14:23:02 -06:00
Scott Lahteine
81bc428b48
Don't compile custom u8g without DOGLCD
2017-11-19 13:58:38 -06:00
Bob-the-Kuhn
c14000775b
PWM fixes, slow down fan update
...
include LPC1768 syntax for M42
couple more pin_t changes
consistency
change M42 to R, P format
Revert "change M42 to R, P format"
This reverts commit 01f12f579ec9ccc1bb9126e68d2c86449e9b7edf.
2017-11-18 07:05:50 -06:00
Scott Lahteine
60adc6ff02
Display filwidth ratio in terms of E mm
2017-11-18 07:01:49 -06:00
Scott Lahteine
6e533748eb
Fixes #8472
2017-11-18 05:15:55 -06:00
Scott Lahteine
485abb023b
Merge pull request #8456 from thinkyhead/bf2_wednesday_tweaks
...
[2.0] No retroactive adjustment with M851 Z
2017-11-18 04:49:53 -06:00
Scott Lahteine
3bba7d60f3
No retroactive changes with M851 Z
...
If using babystep to adjust the Z probe offset, the axis will move and the mesh will be updated at the same time, causing a doubling of the Z offset over the rest of the print.
To correct for this, the current Z position would need to be modified in the opposite direction, canceling out the additional Z offset added to the mesh. This would be confusing to users, and moreover it would not be accurate without also taking the current Z fade level and current Z height into account.
It might make sense to change the mesh in the case where no babystepping is taking place, but this could be considered an undesirable side-effect of changing the `zprobe_zoffset`.
One way to remedy this would be to return to storing the mesh with `zprobe_zoffset` included, then subtracting `zprobe_zoffset` from the returned Z value. Thus, a babystep moving the Z axis up 1mm would subtract 1 from `zprobe_zoffset` while adding 1 to all mesh Z values.
Without including the `zprobe_zoffset` in the `z_values` there is no safe way to alter the mesh in conjunction with babystepping, although it's fine without it.
2017-11-18 03:36:39 -06:00
Scott Lahteine
32512332df
Apply some formatting
2017-11-18 03:12:30 -06:00
Scott Lahteine
7dacc999b9
Remove obsolete show_bootscreen var
2017-11-17 17:01:43 -06:00
Roxy-3D
9729528d13
Update UBL's Delta Probable locations
...
This is a non-intuitive change. @oldmcg says in this post https://github.com/MarlinFirmware/Marlin/issues/7572#issuecomment-340641207 that using DELTA_PRINTABLE_RADIUS is better than DELTA_PROBABLE_RADIUS for setting the probe limits. This is because the automatic probe code checks all locations for being reachable by the probe prior to doing the probe.
2017-11-17 16:44:57 -06:00
Scott Lahteine
d48cb6bf41
Apply coding standards to Max7219
2017-11-17 15:32:21 -06:00
Scott Lahteine
bd8bcf06e7
Updates to Anet A8 configurations
...
Based on #8426
2017-11-16 23:19:36 -06:00
Bob-the-Kuhn
7eea000f4b
E0 auto fan fixes
2017-11-16 18:42:56 -06:00
Scott Lahteine
b2dda096fe
Fix FILAMENT_LCD_DISPLAY for disabled state
2017-11-16 16:57:48 -06:00
Scott Lahteine
1e8afb66b7
Fix a planner comment
2017-11-16 16:57:47 -06:00
Scott Lahteine
50f09cc029
Miscellaneous cleanup
2017-11-16 00:47:16 -06:00
Scott Lahteine
63257dc083
Fix M503 output for M145
...
Fixes #7978
2017-11-15 04:00:18 -06:00
Scott Lahteine
0918dae66e
Add OV() macro for use in thermistor tables
2017-11-15 03:15:18 -06:00
Scott Lahteine
24057270a3
Merge pull request #8420 from RowanMeara/rm-dithering-2.0.x
...
[2.0.x] Fix Software Fan PWM
2017-11-15 02:30:19 -06:00
Scott Lahteine
5079a02c90
Add HAL_SERVO_LIB to HAL_Due.h
2017-11-15 02:07:01 -06:00
Scott Lahteine
9c3761047e
Merge pull request #8434 from thinkyhead/bf2_fix_M32_subroutines
...
[2.0] Fix 'M32 P' subroutines
2017-11-15 01:15:02 -06:00
Scott Lahteine
e0d367f1fb
Fix M32 P subroutine handling
2017-11-15 00:44:21 -06:00
Scott Lahteine
9f8b4c5ee8
Patch SD lib files for readability
2017-11-15 00:44:21 -06:00
Scott Lahteine
2c8c30437e
Fix parser parameter value handling
2017-11-14 23:20:33 -06:00
RowanMeara
6131533157
Change dithering behavior to intended.
2017-11-14 00:47:07 -08:00
Scott Lahteine
e70b44dc0b
Make sure leveled[] is defined for later use
2017-11-14 02:13:38 -06:00
Scott Lahteine
54774841ba
Merge pull request #8416 from thinkyhead/bf2_M114_DETAIL
...
[2.0] Add M114_DETAIL to Configuration_adv.h
2017-11-14 00:28:55 -06:00
Scott Lahteine
009e3a7aa7
Add M114_DETAIL to Configuration_adv.h
2017-11-14 00:03:17 -06:00
Scott Lahteine
6d6c3b1e97
Fix up REPRAPWORLD_KEYPAD defines
2017-11-13 22:14:54 -06:00
Scott Lahteine
3f0a982b8c
Move Filament Width Sensor to Configuration_adv.h
2017-11-13 21:05:57 -06:00
Scott Lahteine
b76e173205
Move test extrusion options under G26
2017-11-13 21:05:57 -06:00
Scott Lahteine
14ebedca27
Drop unused LARGE_FLASH option
2017-11-13 15:44:24 -06:00
Scott Lahteine
b7feb53e8a
Support for Extrudrboard in Printrboard Rev.F
2017-11-13 15:44:23 -06:00
Scott Lahteine
91baca6abb
Patches for compiler warnings/errors
2017-11-13 04:43:47 -06:00
Scott Lahteine
2f73dec077
Apply native workspace fixes for G92, G53-59
2017-11-13 02:09:12 -06:00
Scott Lahteine
04abd8d459
Improve and clarify M428 code
2017-11-13 02:09:11 -06:00
Dave Johnson
c009a990e4
[2.0.x] Fix some 8-bit Teensyduino compile warnings ( #8385 )
...
* Fix some 8-bit Teensyduino compile warnings
-Override Teensyduino legacy NOT_A_PIN 127 define
-some fixups for Printrboard_RevF pins
* Proper cleanup of Printrboard Rev.F pins
* Apply LCD fixes to Printrboard v1
2017-11-13 01:07:59 -06:00
Scott Lahteine
e8e92f8969
No leveling data in M114 if no leveling is enabled
2017-11-12 23:03:38 -06:00
Scott Lahteine
f5d210c35c
Fix report_current_position
2017-11-12 23:02:53 -06:00
Roxy-3D
faaae7a1b2
Provide more clearance for BL-Touch probe
2017-11-12 13:11:22 -06:00
Scott Lahteine
06ee6584fd
Remove offsets from soft endstops, tool change
2017-11-11 22:47:38 -06:00
Scott Lahteine
c938273bd5
Coding standard patch of M290
2017-11-11 22:14:21 -06:00
Scott Lahteine
98c1265e3b
Disable laser power when PWM goes to 0
2017-11-11 22:00:22 -06:00
Scott Lahteine
d4a1154c25
Use do_blocking_move_to where possible
2017-11-10 20:55:23 -06:00
Scott Lahteine
36426af564
Merge pull request #8356 from tcm0116/2.0.x-M600
...
[2.0.x] Normalize load/unload length in M600
2017-11-10 19:44:08 -06:00
Scott Lahteine
1ed86adf9c
Cleanup around updatePID
2017-11-10 19:27:34 -06:00
Scott Lahteine
75a58ee4b8
Fix position_is_reachable bug in waiting
2017-11-10 19:27:33 -06:00
LVD-AC
e334efb2a7
PROBE_MANUALLY etc.
2017-11-10 19:27:33 -06:00
Bob-the-Kuhn
b6415dc169
finish
2017-11-10 14:39:55 -06:00
Scott Lahteine
0efa66be0b
Updates to Traditional Chinese
...
From @cheton at #8347
2017-11-10 04:52:20 -06:00
Scott Lahteine
cba9c1cf9e
Add pre-calculated planner.e_factor
2017-11-10 03:14:24 -06:00
Thomas Moore
600c85226e
Normalize load/unload length in M600
2017-11-10 02:31:46 -06:00
Scott Lahteine
81b91b3f9d
Clean up some trailing white-space
2017-11-10 02:31:04 -06:00
Roxy-3D
2f9848ede3
Correct gMax 1.5+ example file
...
And... Keep both branches in synchronization.
2017-11-09 23:44:14 -06:00
Scott Lahteine
006dad4b52
Add pins_RURAMPS4D.h & change pins.h
...
http://3dtoday.ru/blogs/svs0724/ruramps4d-ramps-for-adruino-due-the-pilot-shipment-available-for-zack/
2017-11-09 21:51:06 -06:00
Scott Lahteine
00514857e9
SBASE serial port -1, RAMPS spacing
2017-11-09 21:41:07 -06:00
Scott Lahteine
c66696c507
Merge pull request #8344 from tcm0116/2.0.x-delta_height
...
[2.0.x] Add delta_height variable in lieu of using home_offset
2017-11-09 01:21:53 -06:00
Scott Lahteine
22e18fe832
Patch _manual_goto_xy for kinematics
2017-11-08 22:21:38 -06:00
Scott Lahteine
0cfb936dd1
Clarify some motion code
2017-11-08 22:15:55 -06:00
Thomas Moore
f34c3597dc
Add delta_height variable in lieu of using home_offset
2017-11-08 22:10:08 -06:00
Bob-the-Kuhn
d47fbf791b
Arduini IDE compatibility changes
...
changed includes to make Arduino IDE happy
2017-11-08 20:49:49 -06:00
Scott Lahteine
95ea43bde4
Update XYZ dual stepper configurations
2017-11-08 20:31:43 -06:00
Scott Lahteine
b0b4a20930
Tweaks to core motion code
2017-11-08 20:09:09 -06:00
Scott Lahteine
8805e24cc7
Fix tilt_mesh_based_on_probed_grid output bug
2017-11-08 20:06:20 -06:00
Scott Lahteine
24437fbb13
Fix G26 Y argument bug
2017-11-08 19:20:10 -06:00
Scott Lahteine
09b05c9d79
Merge pull request #8321 from Bob-the-Kuhn/pins_re-arm
...
2.0.x - pins_RAMPS_RE_ARM.h - add mega2560 pin numbers
2017-11-08 13:11:13 -06:00
Scott Lahteine
e6788bb6ae
Fix get_destination_from_command for E
2017-11-08 12:54:00 -06:00
Roxy-3D
967104e1ce
Default Extrusion Settings were off a few lines in some of the example config files. ( #8333 )
2017-11-08 11:56:00 -06:00
Bob-the-Kuhn
8875885a15
pins add old names
...
fix typo
re-write PWM section, add "not on Re-ARM" list
2017-11-08 11:11:38 -06:00
Roxy-3D
1c6e83c137
if !HAS_MESH we still need to do some motion! ( #8328 )
...
* if !HAS_MESH we still need to do some motion!
Thank You MagoKimbra !
* Ooops.... need #else and not #elif
2017-11-08 09:42:21 -06:00
Scott Lahteine
82f45c3e6a
Patch G33 misuse of PROBE_MANUALLY
2017-11-08 00:36:06 -06:00
Scott Lahteine
064e6fe60e
Remove debugging pin toggle from LCD code
2017-11-07 23:00:54 -06:00
Bob-the-Kuhn
0483a7df91
AVR RRD works
...
LPC1768 VIKI2 & RRDFG are working
looks like all SPIs are working
library change
sh1106 locks up
fixed lockup, started I2C SW com
pretty
re-org
restore a few files
make library happy
switched HAL version of rrd
fix travis error
travis error fixes
another travis fix
cleanup
minor update
one more
correct spacing in platformio.ini
2017-11-07 18:40:29 -06:00
Scott Lahteine
96c9d715f3
Patch abuse of sprintf_P in G33
2017-11-07 17:33:50 -06:00
Roxy-3D
ed62c621d7
Fix G26 Circle Drawing. Add Default Extrusion Settings ( #8313 )
...
- Fix G26 Circle Drawing.
- Add default extrusion settings so machine can print lines on print bed
- Yet to be done: Get LCD Menu's to use these settings.
2017-11-07 17:13:53 -06:00
Scott Lahteine
8fea26aa9d
Fix PID_autotune watch temp increase value
2017-11-07 15:51:48 -06:00
Scott Lahteine
2c099fd4c2
Update Thermal Protection Documentation
2017-11-07 15:46:44 -06:00
Colten Edwards
a6160916b0
[2.0] Fix M48 for delta printers/ABL compile issue ( #8286 )
...
* fix M48 for delta printers
fix M48 for delta printers. home printer if not already homed.
* remove ENABLED(DELTA)
remove ENABLED(DELTA) as it is not needed.
* Update M48.cpp
* abl needs queue.h
without queue.h abl will not compile since there is a script that runs at the end of it and we need to queue it up.
2017-11-07 15:36:33 -06:00
Scott Lahteine
17ef0a513b
Update G92 for native workspace
2017-11-07 13:07:16 -06:00
Scott Lahteine
b4bf8928aa
German language updates
...
Corresponding to #8306
2017-11-07 12:10:29 -06:00
Thomas Moore
73ca5345e1
Fix Delta EEPROM
2017-11-07 16:48:21 +00:00
Scott Lahteine
714d2b9bbc
Merge pull request #8297 from thinkyhead/bf2_M118_and_others
...
[2.0] Fix M118, compiler warnings, etc.
2017-11-06 23:25:49 -06:00
Alexey Shvetsov
83555933aa
Add platformio support for stm32 ( #8246 )
...
[2.0] Add platformio support for stm32
2017-11-06 23:03:59 -06:00
Scott Lahteine
85a62bbf46
Misc. fixes to compiler warnings, etc.
2017-11-06 22:57:05 -06:00
Scott Lahteine
e6aba99f16
Fix M118 parameters, with strict guideline
2017-11-06 22:57:01 -06:00
Scott Lahteine
e9b1944a67
Patch non-extended font option
2017-11-06 21:42:21 -06:00
Roxy-3D
6324b09934
Revert "Fix EEPROM crc ( #8284 )" ( #8292 )
...
This reverts commit 172c36f517
2017-11-06 19:52:05 -06:00
Rowan Meara
172c36f517
Fix EEPROM crc ( #8284 )
2017-11-06 19:19:30 -06:00
Scott Lahteine
cc4d28b73c
Update bilinear for native workspace
2017-11-06 17:04:41 -06:00
Scott Lahteine
94c7205d64
Merge pull request #8281 from thinkyhead/bf2_alligator_dac
...
[2.0] Use fastio for Alligator dac084s085, etc.
2017-11-06 12:16:18 -06:00
Scott Lahteine
2246316605
Fix name collision. timer_t => hal_timer_t
2017-11-05 19:31:07 -06:00
Jason Hitesman
4efaef7039
[2.0.x] Fix archim2 SSDS define ( #8278 )
...
* Fix SSDS define
* Update pins_ARCHIM2.h
2017-11-05 19:23:19 -06:00
Scott Lahteine
c8dfa26bc8
Use fastio for STM32F1 endstop interrupts
2017-11-05 19:20:28 -06:00
Scott Lahteine
185dec800b
Use fastio for HAL SPI EEPROM
2017-11-05 19:20:03 -06:00
Scott Lahteine
297666ea14
Use fastio for Alligator dac084s085
2017-11-05 19:14:42 -06:00
Scott Lahteine
c5d95d318b
Merge pull request #8249 from thinkyhead/bf2_nozzle_cleanup
...
[2.0] Cleanup Nozzle class, fix XY vs Z move order
2017-11-05 18:51:11 -06:00
Scott Lahteine
7e2fee9d56
Merge pull request #8274 from tcm0116/2.0.x-re_arm_D8
...
[2.0.x] Correct RAMPS_D8_PIN for Re-ARM
2017-11-05 18:39:28 -06:00
Scott Lahteine
59c558d612
Merge pull request #8275 from GMagician/2.0.x-Typo-fix
...
[2.0.x] typo fix (removed spaces)
2017-11-05 18:39:04 -06:00
Scott Lahteine
be73d5cc08
Cleanup Nozzle class, fix XY vs Z move order
2017-11-05 18:31:07 -06:00
GMagician
9e93b7ccbd
[2.0.x] removed spaces
...
Removed spaces in array declaration
2017-11-05 20:42:48 +01:00
Thomas Moore
b91a822d7a
Correct RAMPS_D8_PIN for Re-ARM
2017-11-05 13:03:42 -06:00
studiodyne
d295f984e3
Update fwretract.cpp
2017-11-05 15:42:30 +01:00
Scott Lahteine
1b40e9c464
Implement CNC_COORDINATE_SYSTEMS
2017-11-04 22:28:46 -05:00
Scott Lahteine
1b42fba39b
Add CNC_COORDINATE_SYSTEMS to configs
2017-11-04 22:28:46 -05:00
Scott Lahteine
a22434508f
Match tweaks to G33 from 1.1
2017-11-04 22:28:46 -05:00
Scott Lahteine
c07bbd4154
Prettify some EEPROM code
2017-11-04 22:28:46 -05:00
Scott Lahteine
d6aa127c76
Remove I2CPEM workspace offset
2017-11-04 22:28:46 -05:00
Scott Lahteine
79772219ae
Fix Fan Multiplexer init
2017-11-04 22:28:46 -05:00
Scott Lahteine
ca7d36d9ed
RAMPS pins for ANET_KEYPAD_LCD
2017-11-04 21:22:53 -05:00
Colten Edwards
e0a6ee8da5
[2.0] Fix up G33, LPC1768 + SDCARD_SORT_ALPHA ( #8250 )
...
* Update Conditionals_post.h
* Add a cast to round() to convert to a unsigned int
Add's a cast to round() so that it will compile properly. round() returns a float which must be cast to a integer for the following % operation. Use a unsigned int as a negative index to an array is wrong. Should never be more than 255 points allowing us to use a 8 bit cast.
* Update G33.cpp
2017-11-04 18:04:18 -05:00
Scott Lahteine
dac1f6fe74
Tweaks to cubic_b_spline code style
2017-11-04 14:46:10 -05:00
Scott Lahteine
4df024d7b9
Merge pull request #8234 from thinkyhead/bf2_native_operation
...
[2.0.x] Operate in Native Machine Space
2017-11-04 14:31:44 -05:00
Scott Lahteine
601ccded89
Fix case-insensitive config issue
2017-11-04 14:10:13 -05:00
Scott Lahteine
f8393a0908
Operate in Native Machine Space
2017-11-04 00:05:38 -05:00
Scott Lahteine
d83a9a53e8
Merge pull request #8220 from thinkyhead/bf2_serial_port_-1
...
[2.0] Add SERIAL_PORT -1 option for configurators
2017-11-03 15:25:12 -05:00
Scott Lahteine
93ba72ea83
Add SERIAL_PORT -1, set on SBASE, STM32F103RET6
2017-11-03 15:22:45 -05:00
Scott Lahteine
7e43dd1d23
Fix probes configuration url
...
Based on #8241 by @machaj
2017-11-03 13:35:40 -05:00
AnHardt
ca0e4b4e96
Some cleanup around 'lcd_bootscreen()' and 'lcd_kill_screen()'
...
Move 'lcd_bootscreen()' from `lcd_init()` to 'setup()' where it is cexecute exactly once. Saves 'bool show_bootscreen'.
Move the call of 'lcd_custom_bootscreen()' to the begin of 'lcd_bootscreen()'.
Move the delays into the related functions.
Move the picture loop around 'lcd_kill_screen()' into the function.
2017-11-03 12:02:48 +01:00
Scott Lahteine
84b93d941f
Merge pull request #8178 from thinkyhead/bf2_config_tweak
...
[2.0.x] Faster menu navigation for Anet A8
2017-11-03 04:49:17 -05:00
teemuatlut
70be4d206e
[2.0.x] UltiMachine Archim2 ( #8190 )
...
* UltiMachine Archim2 support
* SPI gets included by the library
* Invert TMC2130 diag pin state
* Clean up Archim2 pins
* Update Archim2 config
* FAN2 -> FAN1
* Cleanup
* Add brief Archim installation instructions
* Bring pins into compliance
* Update 1.0 SD Detect pin for 1.1
* Update Configuration.h
* Update pins_ARCHIM2.h
2017-11-03 04:48:15 -05:00
Scott Lahteine
f3deb37bdf
Merge pull request #8236 from thinkyhead/bf2_protect_M303
...
[2.0.x] M303 thermal runaway protection
2017-11-03 04:42:14 -05:00
Scott Lahteine
31f112cf58
Cleanup trailing whitespace
2017-11-03 04:07:45 -05:00
Scott Lahteine
2f9e42feb9
M303 thermal runaway protection
2017-11-03 03:57:46 -05:00
Scott Lahteine
e5ae545647
Remove ADCKey steps acceleration
2017-11-03 03:41:55 -05:00
Luc Van Daele
6827e243a0
[2.0.x] G33 magic numbers ( #8171 )
...
* [2.0.x] G33 magic numbers
* oops
* Comments
* oops
* warning
* better comment section
* remarks
* extra grids
2017-11-03 03:36:16 -05:00
Scott Lahteine
8735ae984b
Merge pull request #8227 from tcm0116/2.0.x-pin_mapping
...
LPC1768: updates to use the new pin_t typedef
2017-11-03 03:10:19 -05:00
AnHardt
c72a0610b4
Fix watchdog in WATCHDOG_RESET_MANUAL mode AVR
2017-11-03 04:43:00 +01:00
Thomas Moore
13d839795c
LPC1768: updates to use the new pin_t typedef
2017-11-02 18:43:57 -05:00
Scott Lahteine
eb13b8d985
Add MKS Gen L board
2017-11-02 17:06:08 -05:00
Morten
063e957fc4
Update pins_MKS_SBASE.h ( #8188 )
...
* Update pins_MKS_SBASE.h
Deleted E_MUX2, not used.
Changed #define LCD_PINS_D4 P0_14 // EXP1.5 to #define LCD_PINS_D4 P0_15 // EXP1.5, wrong in MKS's pinout schematic.
Swapped TEMP_BED_PIN and TEMP_0_PIN port's, request from user, more logical...
* Update pins_MKS_SBASE.h
Moved MUX signals to J8 and re added MUX2, cleaner wiring..
2017-11-02 13:50:23 -05:00
Scott Lahteine
f7133e53fd
Fix case light off
...
Addressing #8205
2017-11-01 21:22:15 -05:00
Scott Lahteine
0108d5181f
Allow asterisks in G-Code commands
...
Addressing #6655
2017-10-31 21:20:41 -05:00
Scott Lahteine
34745b2183
Organize boards.h by architecture
2017-10-31 16:10:38 -05:00
android444
9cc1d8e312
[2.0.x] Support for SilverGate Board
2017-10-31 15:27:26 -05:00
Scott Lahteine
03e5369411
Faster menu navigation for Anet A8
...
Addressing #8166
2017-10-31 14:46:55 -05:00
Scott Lahteine
f1edf83720
Merge pull request #8187 from rafaljot/patch-5
...
Update InterruptVectors_Due.cpp
2017-10-31 14:14:08 -05:00
Scott Lahteine
b2bd77c40a
Merge pull request #8191 from thinkyhead/bf2_rearm_more
...
[2.0.x] Add SDCARD_SORT_ALPHA options for LPC1768
2017-10-31 14:12:14 -05:00
Scott Lahteine
571ced712d
Add SDCARD_SORT_ALPHA options for LPC1768
2017-10-31 14:05:40 -05:00
rafaljot
778e4e4c23
Update InterruptVectors_Due.cpp
...
const pfnISR_Handler *isrtab = get_relocated_table_addr();
What compiler do you use? Arduino 1.8.5 can't compile this "const".
2017-10-31 15:00:06 +01:00
Scott Lahteine
cae8703e0d
Merge pull request #8181 from thinkyhead/bf2_fix_bootscreen_repeat
...
[2.0.x] Only show custom bootscreen once
2017-10-31 02:37:40 -05:00
Scott Lahteine
a516856df9
Only show custom bootscreen once
2017-10-31 01:47:30 -05:00
GMagician
727a403ba1
[2.0.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour ( #8176 )
...
* [2.0.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour
NO_MOTION_BEFORE_HOMING should prevent XYZ movements only when homing is not done.
E axes should be allowed
* Update G0_G1.cpp
* Update G0_G1.cpp
2017-10-30 22:50:22 -05:00
Alexey Shvetsov
577659cacf
Basic support for Azteeg_X5_GT ( #8139 )
...
* Basic support for Azteeg_X5_GT
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
* Add fan pins for AZTEEG X5 GT
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
* Fix endstop pins
* Add servo0 pin
2017-10-30 16:01:20 -05:00
Scott Lahteine
0b02f9cc33
Merge pull request #8168 from thinkyhead/bf2_config_tweak
...
[2.0.x] Apply Re-ARM SPI review items
2017-10-30 15:49:50 -05:00
Scott Lahteine
04c0d9f3c3
Implement kinematic software endstops
2017-10-30 15:16:30 -05:00
Scott Lahteine
9f89b5d876
Fix for MAX_VFAT_ENTRIES sanity check
2017-10-30 15:11:47 -05:00
Scott Lahteine
2cdde08339
Apply items specified in code review
...
Followup to #8122
2017-10-30 15:03:07 -05:00
Scott Lahteine
34be5d33c0
The plural of 'axis' is 'axes'
2017-10-30 14:21:43 -05:00
Bob-the-Kuhn
6e5f13a5c2
Merge pull request #8122 from Bob-the-Kuhn/2.0.x-restore-Re-ARM-RepRap-Discount-Full-Graphics-fix-(partial-solution)
...
2.0.x - Restore fix for garbaged display on Re-ARM with RepRap Full Graphics Smart Controller
2017-10-30 13:16:16 -05:00
Bob-the-Kuhn
b7a66742dd
tested
...
add sort alpha section to other LPC1768 boards
2017-10-30 13:01:19 -05:00
Jeffrey Li
bbc2e66634
Fix AZSMZ MINI pins for new LPC1768 pinmapping
2017-10-30 04:19:06 -07:00
Scott Lahteine
31e96935f7
Fix EXTRA_FAN_SPEED
...
Addressing #8158
2017-10-30 00:10:00 -05:00
Scott Lahteine
c94dce6b32
Merge pull request #8113 from thinkyhead/bf2_fixup_sd_reprint
...
[2.0.x] Cleanup after SD Print Again, whitespace, tabs
2017-10-29 23:57:51 -05:00
Scott Lahteine
ce1c9c0808
Tweak QUICK_HOME description
2017-10-29 23:48:13 -05:00
Scott Lahteine
12458cefc4
Remove 5s timer hack. Encoder pos is saved on print start!
2017-10-29 22:45:19 -05:00
Scott Lahteine
9a4cf11835
Remove return_to_status_ms hack, just use defer...
2017-10-29 22:45:18 -05:00
Scott Lahteine
8949c8c0a5
Move SD_REPRINT_LAST_SELECTED_FILE to ultralcd.cpp
2017-10-29 22:45:18 -05:00
Scott Lahteine
817175613a
Merge pull request #8157 from thinkyhead/bf2_anet_10_servo
...
[2.0.x] Define a default SERVO0_PIN for Anet 1.0
2017-10-29 19:55:00 -05:00
Scott Lahteine
723f2a77f6
Implement support for Dual X and Y endstops
2017-10-29 18:56:04 -05:00
Scott Lahteine
e04425281d
Add Dual Steppers / Endstops to configs
2017-10-29 18:56:04 -05:00
Scott Lahteine
edff2c917b
Cleanup for DIGIPOTS settings
2017-10-29 18:56:03 -05:00
Scott Lahteine
3e8754a38a
Add/correct time units on planner vars / M205 B
2017-10-29 18:47:21 -05:00
Scott Lahteine
b2a48f1a04
Provide a SERVO0_PIN for non-standard LCD
2017-10-29 18:36:16 -05:00
Scott Lahteine
b232f39341
AVR: Hidden option to use 8s watchdog
2017-10-29 18:36:16 -05:00
Scott Lahteine
9d4cfd2013
Merge pull request #8142 from thinkyhead/bf2_fix_m303
...
[2.0.x] Fix M303 thermal protection
2017-10-29 04:46:34 -05:00
Scott Lahteine
eae0aea1e0
Fix M303 thermal protection
2017-10-29 04:30:50 -05:00
Luc Van Daele
a1a4fc277e
(2.0.x) serious bug G33 ( #8136 )
...
* (2.0.x) serious bug G33
* Revert config changes
This reverts commit 74b5a98223b7b7fb970d05b8541f4a079c3cfe56.
2017-10-29 04:12:33 -05:00
Thomas Moore
325233b454
Fix automatic stepper assignment for X/Y/Z dual stepper drivers ( #8130 )
2017-10-28 19:45:07 -05:00
Thomas Moore
50b4f9cbf7
LPC1768 Pin Mapping and M43 cleanup ( #8119 )
...
* LPC1768 M43 cleanup
* Update pinmapping.h to #define pins
2017-10-28 19:44:54 -05:00
Scott Lahteine
6b1d1a818b
Revert default BABYSTEP_MULTIPLICATOR to 1
2017-10-27 19:45:44 -05:00
etagle
ba8dc678f5
Arduino Due XON/XOFF implementation
...
Alos includes emergency parser and configurable TX/RX buffers for Arduino Due.
2017-10-27 03:24:23 -05:00
etagle
8d9c3cc2b7
Add a module for Due SRAM-based Interrupt Vector Table
...
This is the ONLY way to be able to override ISRs stolen by the Arduino Runtime, such as Serial or USB device interrupts. This feature is needed so Arduino modules can be replaced and enhanced.
2017-10-27 03:24:23 -05:00
etagle
c9bbef6380
Cosmetic fix for HAL_AVR/MarlinSerial.cpp
...
Instead of using const char, it is better to use uint8_t
2017-10-27 03:24:23 -05:00
LVD-AC
dcfc2503c2
G33 Autotune calibration update #10
2017-10-27 02:11:24 -05:00
Scott Lahteine
b338cafc65
Merge pull request #8111 from thinkyhead/bf2_fwretract_fix_oct26
...
[2.0.x] Improved Firmware Retraction logic
2017-10-27 02:02:06 -05:00
Scott Lahteine
ada90f7335
Clean up trailing spaces
2017-10-26 23:33:43 -05:00
Scott Lahteine
7fad26549b
Concise SD_REPRINT_LAST_SELECTED_FILE description
2017-10-26 23:33:02 -05:00
Scott Lahteine
33f379fe88
Add some Polish language
...
Thanks @SCiunczyk
2017-10-26 22:49:04 -05:00
Scott Lahteine
daeff5a11a
Tweak neopixel self-test
2017-10-26 22:47:07 -05:00
Scott Lahteine
0ceec1f166
Fix leveling_active_at_z warning
2017-10-26 22:22:54 -05:00
studiodyne
eb02f8c719
Improve FWRETRACT logic, add common sense
2017-10-26 22:22:54 -05:00
Scott Lahteine
bd78ca0ee3
Add M290 Babystepping
2017-10-26 20:44:43 -05:00
Scott Lahteine
ce5f0ec85a
Bring STM32 example config up to date
2017-10-26 17:25:44 -05:00
Scott Lahteine
46e9eae159
Tweak to M100 config comment
2017-10-26 17:25:44 -05:00
Scott Lahteine
c45514f811
Merge pull request #8094 from thinkyhead/bf2_neopixel_led_parity
...
[2.0.x] Bring NEOPIXEL_LED into parity with 1.1.x
2017-10-26 17:24:38 -05:00
Bob-the-Kuhn
229a27a1c7
save FLASH by using reduced font for some languages
2017-10-26 16:08:17 -05:00
Roxy-3D
3f5f39576b
Reprint option for last SD Memory card file ( #8106 )
...
* Re-Print of same SD Memory Card file with single click
* Re-Print of same SD Memory Card file with single click
* This is the bugfix-v2.0.0 version of https://github.com/MarlinFirmware/Marlin/pull/8104
2017-10-26 15:50:18 -05:00
Thomas Moore
9e699811d2
Make LPC1768 pinmapping not specific to Re-ARM ( #8063 )
...
* Merging early because of build failures. See #8105
* Make LPC1768 pinmapping not specific to Re-ARM
* Add HAL_PIN_TYPE and LPC1768 pin features
* M43 Updates
* Move pin map into pinsDebug_LPC1768.h
* Incorporate comments and M226
* Fix persistent store compilation issues
* Update pin features
* Update MKS SBASE pins
* Use native LPC1768 pin numbers in M42, M43, and M226
2017-10-26 13:37:26 -05:00
Scott Lahteine
3ac581eac9
Neopixel changes for parity with 1.1.x
2017-10-25 18:40:04 -05:00
jeffyl
7b3098bbd5
Add AZSMZ Mini ( #8005 )
...
* Add AZSMZ Mini
* Remove tabs, adjust spacing
* Renumber boards to group by family
* Patch up spacing
* Tweak
2017-10-25 01:16:54 -05:00
Scott Lahteine
e00ed10c4c
GT2560 config MKS_MINI_12864 => SDSUPPORT
2017-10-25 01:12:48 -05:00
Scott Lahteine
10a5e4d80f
Merge pull request #8078 from thinkyhead/bf2_mks_mini_lcd
...
[2.0.x] Add MKS MINI 12864 support to GT2560
2017-10-25 01:10:03 -05:00
Scott Lahteine
ee9b8bf0f1
Add MKS MINI 12864 support to GT2560
2017-10-24 19:15:41 -05:00
Scott Lahteine
f65fc7ffab
Merge pull request #8044 from thinkyhead/bf2_mesh_consolidate
...
[2.0.x] Simplify mesh bounds config
2017-10-24 18:56:43 -05:00
Scott Lahteine
070cd34fe8
Merge pull request #8077 from thinkyhead/bf2_MKS_BASE_followup
...
Clean up HAL trailing spaces, MKS SBASE pins
2017-10-24 18:38:48 -05:00
Scott Lahteine
7f55d82fd1
Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h
2017-10-24 18:26:43 -05:00
Scott Lahteine
90a14b4f5b
Clean up HAL trailing spaces, MKS SBASE pins
2017-10-24 18:20:23 -05:00
Thomas Moore
51fafccc16
[2.0.x] Enable hardware serial ports on LPC1768 ( #8004 )
...
* Enable hardware serial ports on LPC1768
* Fix compilation errors with other HALs
* FIx order of includes in LPC1768 HAL main.cpp
* Add support for RX_BUFFER_SIZE and TX_BUFFER_SIZE options in Configuration_adv.h
2017-10-24 17:28:33 -05:00
Scott Lahteine
580b6e9089
Apply physical limits to mesh bounds
2017-10-24 16:54:07 -05:00
Scott Lahteine
4e2baeb3e1
Update indentation, file-wrapping for Marlin 2.0.x
2017-10-24 16:54:06 -05:00
Scott Lahteine
60af705e6d
Relocate SPI.h to the HAL folder
2017-10-24 16:54:06 -05:00
Scott Lahteine
46aae4c6e7
Merge pull request #8074 from thinkyhead/bf2_verbiage_like_8061
...
Fix some config verbiage
2017-10-24 15:25:12 -05:00
Scott Lahteine
3356d5a72d
Merge pull request #8072 from thinkyhead/bf2_fix_M600
...
[2.0.x] Fix position sync in M600 pause/resume
2017-10-24 14:55:46 -05:00
Scott Lahteine
5f87324536
Fix some config verbiage
2017-10-24 14:53:42 -05:00
Scott Lahteine
272f9f65dc
Fix some typos
2017-10-24 14:29:15 -05:00
studiodyne
8181220bfd
Fix position sync in M600 pause/resume
2017-10-24 14:29:15 -05:00
cdedwards
6296ab2173
Add GFX overlay to UBL mesh edit ( #8038 )
...
* Add GFX overlay to UBL mesh edit
Fixed misplaced HAS_TEMP_BED in dogm_bitmaps.h
rename _lcd_babystep_zoffset_overlay to _lcd_zoffset_overlay_gfx and move it out of BABYSTEP_ZPROBE_OFFSET to we can use it for over things. Add this function into UBL mesh edit screen.
update all Configuration.h to add ENABLE_MESH_EDIT_GFX_OVERLAY
* Add Sanity to UBL insanity
Need to check for DOGLCD otherwise error out.
2017-10-24 14:14:03 -05:00
Roxy-3D
72156a2029
change to better (more clear) names ( #8050 )
...
set_destination_to_current() changed to set_destination_from_current()
set_current_to_destination() changed to set_current_from_destination()
2017-10-21 11:42:26 -05:00
Scott Lahteine
0cb423b5b3
Apply consistency for other configs
2017-10-21 00:41:51 -05:00
Scott Lahteine
8c78f8f790
Add Makeboard MINI for Micromake C1
2017-10-21 00:41:51 -05:00
Scott Lahteine
1fbb307aaf
Merge pull request #8021 from thinkyhead/bf2_scroll_longnames
...
[2.0.x] Add SCROLL_LONG_FILENAMES to reveal longer filenames
2017-10-20 21:33:54 -05:00
Scott Lahteine
3d2b2eb1ca
Prevent SDCARD_SORT_ALPHA from exploding
2017-10-20 19:13:21 -05:00
Scott Lahteine
783ddf9691
Add SCROLL_LONG_FILENAMES option
2017-10-20 19:13:21 -05:00
Roxy-3D
5439358281
Basic UBL operations working on 32-bit platforms ( #8024 )
...
* 32-bit work for UBL
* Update FT i3-2020 reference file
2017-10-19 10:44:45 -05:00
Scott Lahteine
9e5cbf0198
BQ should set this in its config, and does
2017-10-18 22:56:03 -05:00
Scott Lahteine
348e5e3109
Simplify Cartesian probing boundaries
...
Followup to #8012
2017-10-18 17:14:32 -05:00
Luc Van Daele
3986a84f77
boolval revisited ( #8016 )
2017-10-18 14:03:17 -05:00
Roxy-3D
572cf0ec95
UBL able to generate mesh and save and load it on 32-bit platforms ( #8015 )
...
* Get UBL Mesh Generation, Mesh Save & Mesh Load working with 32-Bit platforms
* clean up read_data() and write_data() for non-LPC1768 HAL's
* Get read_data() and write_data() return codes consistent
All HAL's read_data() and write_data() return false if they succeed.
* Get read_data() and write_data() return codes to be consistent
Make read_data() and write_data() return true if an error happens.
* Say UBL is now checked out on machine types in default Configuration.h file.
2017-10-18 14:00:29 -05:00
Thomas Moore
67cc29cd3c
Update UBL mesh boundaries to accomidate beds centered at 0, 0 ( #8012 )
2017-10-18 10:03:30 -05:00
Roxy-3D
6cb26c98c8
Fix Baby Stepping on 32-Bit platforms ( #8001 )
...
Also, Max7219 debug code was used for this effort. It has been
improved and hardened.
2017-10-16 16:29:37 -05:00
Scott Lahteine
3b7b0492f8
Merge pull request #7993 from jeffyl/bugfix-2.0.x
...
[2.0.x] Proper support for AZSMZ 12864 LCD on SmartRAMPS
2017-10-16 14:12:29 -05:00
Jeffrey Li
26531f2715
Add lcd to all sample configs
2017-10-16 03:24:25 -07:00
Scott Lahteine
ce48403a0b
Add EXTRA_FAN_SPEED feature
...
Based on #7883 by @studiodyne
2017-10-16 02:34:13 -05:00
Jeffrey Li
eeb4611606
Add proper support for the AZSMZ 12864 LCD on a SMART RAMPS
2017-10-16 00:33:07 -07:00
Scott Lahteine
c46189e429
Fix UBL+Delta segmented feedrate
...
Based on #7948
2017-10-15 16:31:09 -05:00
Scott Lahteine
5c4f3e0107
Add LCD_SET_PROGRESS_MANUALLY
2017-10-15 03:05:29 -05:00
Scott Lahteine
014a83fe09
Merge pull request #7984 from thinkyhead/bf2_micromake_c1
...
[2.0.x] Micromake C1 Configurations, Unaccented French
2017-10-14 21:19:32 -05:00
Scott Lahteine
bc7df0188e
Add Micromake C1 configurations
2017-10-14 20:28:12 -05:00
Scott Lahteine
34a261416f
Add unaccented French language
2017-10-14 20:28:12 -05:00
Scott Lahteine
e587f0893c
Define AVR_ATmega2560_FAMILY_PLUS_70 in Conditionals
2017-10-14 19:05:32 -05:00
Scott Lahteine
fd128b3c93
Fix some AVR HAL code style
2017-10-14 19:05:10 -05:00
Scott Lahteine
799360c576
Enhance Teensy/RAMPS pins files
2017-10-14 18:44:20 -05:00
Scott Lahteine
d3e5a22a5d
Add MIN_SOFTWARE_ENDSTOP_[XYZ] to example configs
2017-10-14 18:44:20 -05:00
Jeff Eberl
b206f70693
Split the software endstop capability by axis.
2017-10-14 18:44:20 -05:00
Scott Lahteine
ec69e97bda
Merge pull request #7974 from jeffyl/bugfix-2.0.x
...
Fix include path for VIKI
2017-10-14 17:38:42 -05:00
Morten
91e28edda6
[2.0.x] Add new board: MKS Sbase ( #7945 )
...
* Add files via upload
* Add files via upload
* Add files via upload
* Checked LCD / edited / revised pins_MKS_BASE.h
As requested :)
* Delete Configuration_adv.h
* Delete Configuration.h
* Deleted /Marlin/Marlin/src/config/examples/MksSbase/*.* and moved them to /Marlin/Marlin/src/config/examples/Mks/Sbase/*.*
* Add files via upload
2017-10-14 09:44:18 -05:00
Jeffrey Li
3c8a3a02ba
Fix include path for VIKI
2017-10-14 04:06:17 -07:00
Scott Lahteine
4586acad8c
Merge pull request #7959 from alexxy/bugfix-2.0.x
...
Python isnt always python2
2017-10-14 05:02:07 -05:00
Scott Lahteine
497f86453e
Merge pull request #7964 from gallynero/patch-2
...
fix 'axis_unhomed_error' not defined error
2017-10-14 05:00:58 -05:00
Scott Lahteine
c0dddd4233
Tweaks to tool_change, GcodeSuite::T()
2017-10-14 02:53:19 -05:00
Scott Lahteine
ca66574062
ADC sensor fix inspired by 'Evgen2' on Twitter
2017-10-14 02:28:13 -05:00
Scott Lahteine
1344ca4b2f
UBL no longer needs ubl_state
2017-10-14 02:18:32 -05:00
Scott Lahteine
8dd08425fd
Improve LCD leveling edits
2017-10-14 02:18:31 -05:00
Scott Lahteine
3e3911fb81
Use planner.leveling_active for all leveling systems
2017-10-14 02:18:31 -05:00
Scott Lahteine
32c607ffe2
Ensure fade factor is recalculated if fade height changes
2017-10-14 02:18:31 -05:00
Scott Lahteine
ca1e47375c
Move fade_scaling_factor_for_z to Planner
2017-10-14 02:18:31 -05:00
Scott Lahteine
9a930ebec2
Make leveling_is_active a macro
2017-10-14 02:18:31 -05:00
Scott Lahteine
58abc66c1d
Tweak bed leveling conditionals
2017-10-14 02:18:31 -05:00
Scott Lahteine
1adb5a6a48
Remove obsolete UBL z_offset
2017-10-13 08:22:46 -05:00
gallynero
3619a4cbea
fix 'axis_unhomed_error' not defined error
...
Fix 'axis_unhomed_error' not defined error when pause with unhomed status
2017-10-13 09:08:02 +02:00
Alexey Shvetsov
12d212d1b4
Python isnt always python2
...
So now this script is compatible with both python versions 2 and 3
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
2017-10-13 01:39:06 +03:00
Scott Lahteine
cc01a36363
Merge pull request #7947 from thinkyhead/bf2_more_READMEs
...
[2.0.x] Add a README.h file for Arduino IDE users
2017-10-12 06:56:41 -05:00
Scott Lahteine
4764710b11
Add a README.h file for Arduino IDE users
2017-10-11 18:10:15 -05:00
Bob-the-Kuhn
4e3ee845b9
config_adv ( #7941 )
...
get rid of twi.h
move to board files
2017-10-11 15:42:24 -05:00
Roxy-3D
0e260c6c1d
Get FolgerTech i3-2020 working again with 32-bit platforms ( #7944 )
...
Setup FolgerTech i3-2020 Configuration files as a reference platform for
32-Bit work.
Also fix MAX7219 debug lights on 32-bit platforms.
2017-10-11 15:23:04 -05:00
Bob-the-Kuhn
26bfae58d4
MPC4451 I2C support
2017-10-11 00:30:41 -05:00
Scott Lahteine
1f5c432e29
Merge pull request #7920 from thinkyhead/bf2_neopixel_full
...
[2.0.x] Move FILAMENT_RUNOUT_SENSOR to a feature
2017-10-10 03:05:00 -05:00
Scott Lahteine
732e87e83c
Merge pull request #7892 from GMagician/Serial-double-echo-fix
...
[2.0.x] Serial double echo fix
2017-10-10 02:42:16 -05:00
Scott Lahteine
f8e8fcb978
Move FILAMENT_RUNOUT_SENSOR to a feature
2017-10-10 02:37:42 -05:00
Slawomir Ciunczyk
a11e6a1022
Different NEOPIXEL types
...
Same as #7728 but for 2.0.x,
Lot of cleanup and remove references in whole code to other "LED files" than leds.h. Now will be much easier to add next drivers/libraries. e.g. FastLED. But bad news, currently FastLED is suporting only RGB devices (no RGBW)
2017-10-10 02:17:36 -05:00
Scott Lahteine
b30b55307c
Merge pull request #7909 from thinkyhead/bf2_goodbye_legacy_advance
...
[2.0.x] Remove legacy ADVANCE feature
2017-10-10 00:31:18 -05:00
Scott Lahteine
1d04197f2f
Merge pull request #7916 from thinkyhead/bf2_probeless_ubl
...
[2.0.x] Allow UBL G29 and G26 to build without a probe
2017-10-10 00:30:27 -05:00
Thomas Moore
9b0ee53b12
Use segmented moves when moving axis from LCD
2017-10-09 23:25:43 -05:00
Scott Lahteine
442669d23c
Allow UBL to build without a probe
2017-10-09 18:57:41 -05:00
Scott Lahteine
20ebe218c8
Tweaks to VIKI lcd support
2017-10-09 17:01:07 -05:00
Scott Lahteine
09fa34a9e1
Modernize configs
2017-10-09 16:18:10 -05:00
Scott Lahteine
560d366b80
Move VIKI SCK/MOSI pins fix to Conditionals_POST.h
2017-10-09 16:13:49 -05:00
Scott Lahteine
e9bcb9d048
Add 4 new LCD displays
2017-10-09 15:58:02 -05:00
Scott Lahteine
03f4891fb9
Remove legacy ADVANCE feature
2017-10-09 04:25:18 -05:00
GMagician
546f02c6f4
[2.0.x] Addressing #7896
...
Compiler error, added char c variable
2017-10-08 23:16:35 +02:00
GMagician
eb96d37da0
Serial double echo fix
...
Fix double character sent when TX buffer size is 0 on mega2560
2017-10-07 22:20:00 +02:00
Scott Lahteine
deeea98d22
LCD filename already concatenated
2017-10-07 15:16:05 -05:00
Scott Lahteine
a058638d11
Merge pull request #7875 from thinkyhead/bf2_fill_eeprom_dat_ff
...
[2.0.x] Update LPC persistent store to initialize eeprom.dat with FF
2017-10-07 15:13:21 -05:00
Scott Lahteine
ae1a18d0a1
LCD filename already concatentated
2017-10-07 15:10:15 -05:00
Scott Lahteine
12aa1b999a
Fix display issue with SD_SORT_ALPHA cached names
2017-10-07 15:08:08 -05:00
Dave Johnson
9d0e4ea3d5
[2.0.x] Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled ( #7879 )
...
* Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled
If HOME_AFTER_DEACTIVATE, there is no need to warn on LCD since printer will home prior to starting print. Saves 60 bytes PROGMEM on AVR with U8g panel.
* Reduce lines used
* Reduce lines used
2017-10-07 15:02:55 -05:00
Scott Lahteine
8315a8a716
Apply fixes for DUE
...
Alternative to #7882 . If F_CPU is greater than 1000 it can be evenly divided by 8. Over 10000, 16; over 100000, 32; over 1 million, 64; etc.
2017-10-07 14:31:18 -05:00
Scott Lahteine
4b36a542e0
Merge pull request #7876 from thinkyhead/bf2_hotend_messages
...
[2.0.x] Addressing #7612
2017-10-07 13:37:43 -05:00
Unknown
12730c1303
[2.0.0] Resolve USE_CONTROLLER_FAN compile errors
...
Add to controllerfan.cpp:
#include "../module/stepper_indirection.h"
#include "../module/temperature.h"
2017-10-07 05:26:36 -07:00
Scott Lahteine
7fb3343bda
[2.0.x] Addressing #7612
...
Change "extruder" to HOTEND in sanity error messages
2017-10-07 02:27:26 -05:00
victorpv
8998f31ee1
Update LPC persistent store to initialize eeprom.dat with FF
...
This change initialize any data in eeprom.dat beyond the current file size to FF.
That way if eeprom.dat is deleted and created again, it doesn't take the old values or random ones, but rather starts with FF in all positions as a real brand new or erased eeprom.dat
Currently if you delete eeprom.dat and restart the board, the new file is created in the same sector with the same content, since FAT does not actually delete the data, just marks the sector as free. I tested by deleting the file, and then rebooting the board, and checking the file content.
The change can be tested in the same way, deleting, rebooting the board, and then the new content should be all FF.
If an eeprom file already exist with data on it, but smaller than E2END, it will be padded with FF on first access, so it will not have random or old content appended.
2017-10-07 02:18:42 -05:00
Scott Lahteine
2aa22c5a5e
Merge pull request #7874 from thinkyhead/bf2_anet_encoder_pulses
...
[2.0.x] Fixing ANET encoder pulses
2017-10-07 01:21:23 -05:00
Scott Lahteine
f99d1dedae
Fixing #7833
...
Derived from #7873
2017-10-07 00:10:05 -05:00
Scott Lahteine
de84f57a9c
Patch SD file draw bug
2017-10-06 23:57:11 -05:00
Scott Lahteine
ef90b49fff
Remove extra NEWPANEL settings in Conditionals_LCD.h
2017-10-06 23:56:58 -05:00
Scott Lahteine
67a7dd9792
Merge pull request #7866 from thinkyhead/bf2_finally_G33_is_done
...
[2.0.x] Apply G33 updates
2017-10-06 16:03:26 -05:00
Scott Lahteine
b220bc7521
Apply G33 updates
...
Adapted from #7865
2017-10-06 15:47:51 -05:00
Scott Lahteine
9fe7f53216
Misc general spacing cleanup
2017-10-06 15:14:01 -05:00
Scott Lahteine
c0382cd8cd
Add UTF-8 mapper for Slovak language
...
Based on #7862 , #7846 by @rmoravcik
2017-10-06 15:14:01 -05:00
Scott Lahteine
c81843a414
Set TEMP_SENSOR_0 to 1 in CR-10 example config
...
As pointed out in #7692 by @totalitarian
2017-10-06 14:30:53 -05:00
android444
72693a7e87
[2.0.x] Fixed RAMPS FD V1 pins.h file ( #7852 )
...
* test only
test
* Fixed RAMPS FD V1 pins.h file
* Fix typo
2017-10-06 13:27:15 -05:00
Chris Pepper
aa51a02b8f
LPC1768: fix serial buffer underrun ( #7854 )
...
When the buffer is empty index_write == index_read, but they needed constrained by buffer_mask
2017-10-05 17:19:43 -05:00
Chris Pepper
46b2773e13
General fixes for LPC1768 ( #7834 )
...
* fixed some include paths
* LPC1768: Fix Serial API
Add missing serial methods used if TX_BUFFER_SIZE is set
Change return value of HalSerial:read to match Arduino API
* LPC1768: add filters to ADC
This is to try and compensate for hardware issue and oversensitivity to noise
* LPC1768: remove the polling section of delayMicroseconds
* LPC1768: lock usb mass storage device while device accesses it.
Currently only applicable to persistent store,
The device always has priority and will unmount the sd card from the host, Windows then tries to automount again so it can look like the explorer window freezes. Linux Mint, by default, just closes the Nemo window.
* Add timeout to make sure if Serial never connects that Marlin still boots
* Remove unneeded ifdef CPU_32_BIT
In general the need for ifdef CPU_32_BIT blocks means that something is missing from the HAL API or a Platform, in this case HAL_TICKS_PER_US was missing from the AVR Platform
* LPC1768: relocate RE-ARM debug_extra_script.py
2017-10-04 15:40:54 -05:00
Scott Lahteine
7258218f89
Fix xon_xoff_state initialization
2017-10-04 12:11:56 -05:00
Scott Lahteine
bf596fb039
Merge pull request #7818 from thinkyhead/bf2_xon_xoff
...
[2.0.x] Add XON/XOFF serial handshaking
2017-10-02 23:52:30 -05:00
Scott Lahteine
ca3c9baf1b
Fix DUAL_X_CARRIAGE manual moves, add T0/T1 menu item
2017-10-02 23:35:55 -05:00
Scott Lahteine
a8b8d4e85e
Add a typedef for MENU_ITEM(function,…) functions
2017-10-02 23:33:57 -05:00
Scott Lahteine
6ea2cc0293
Make prepare_move_to_destination_dualx a proper move function
2017-10-02 23:32:28 -05:00
Scott Lahteine
e472a7569b
Remove extra auto_current_control call
2017-10-02 23:32:05 -05:00
Scott Lahteine
508d764d63
Add serial XON/XOFF handshaking
...
From @ejtagle, originally #7459
2017-10-02 04:12:30 -05:00
Scott Lahteine
af15383578
Add XON/XOFF options to example configs
2017-10-02 04:05:49 -05:00
Scott Lahteine
33c4d45f2f
Merge pull request #7812 from thinkyhead/bf2_fix_resume_print
...
[2.0.x] Fix broken M600 resume_print
2017-10-01 22:55:28 -05:00
Scott Lahteine
a03e70d46c
Fix M600 resume_print
...
Derived from #7811 and #7779
2017-10-01 21:59:42 -05:00
Scott Lahteine
2d41c59320
Tweak some spacing
2017-10-01 21:59:42 -05:00
Scott Lahteine
5ae390e240
Apply NO_MOTION_BEFORE_HOMING to examples
2017-10-01 21:58:50 -05:00
Scott Lahteine
90af1fe5ee
Implement NO_MOTION_BEFORE_HOMING option
2017-10-01 21:58:50 -05:00
Scott Lahteine
965b0ab53e
Spacing adjustments
2017-10-01 21:58:50 -05:00
Scott Lahteine
ac41eb5871
Merge pull request #7722 from tcm0116/2.0.x-warnings
...
Cleanup 2.0.x compiler warnings
2017-10-01 21:56:54 -05:00
Thomas Moore
ae2173cd52
Synchronize retractions
2017-09-30 17:28:46 -05:00
Thomas Moore
0cb00f52d9
Cleanup warnings
2017-09-30 16:47:17 -05:00
Bob-the-Kuhn
1beaef0452
fix 3S hang & enable SPLIT
2017-09-30 10:27:41 -05:00
Thomas Moore
020ce176c4
Fix Servo class compile errors
2017-09-29 08:17:30 -05:00
Bob-the-Kuhn
62054af6eb
2.0 compile issues
2017-09-28 10:16:25 -05:00
Christopher Pepper
bea3ec2724
M355 S0, S1 fixes & faster LCD, SD card
...
fix Travis error
2017-09-27 19:26:00 -05:00
Scott Lahteine
8c622a59cf
Merge pull request #7774 from thinkyhead/bf2_lcd_leveling_status
...
[2.0.x] Show leveling status on character LCD
2017-09-27 13:10:25 -05:00
Scott Lahteine
56c05a7015
Show leveling status on character LCD
2017-09-27 12:21:15 -05:00
Scott Lahteine
2ee4eef25c
Merge pull request #7748 from GMagician/Addressing-#7730
...
[bugfix-2.0.x] Fix compiler error (issue #7730 )
2017-09-27 12:06:55 -05:00
Scott Lahteine
ffed785656
Merge pull request #7768 from thinkyhead/bf2_HAL_STM32F1
...
[2.0.x] HAL for STM32F1
2017-09-27 11:52:34 -05:00
Scott Lahteine
604b804125
Add confirmation step to Init EEPROM
2017-09-27 11:31:38 -05:00
Tannoo
c869dc9745
User script return-to-status option
2017-09-27 11:31:38 -05:00
victorpv
e9acb63290
STM32F1 HAL
...
Adding files for STM32F1 HAL based on libmaple/stm32duino core.
Current persistent_store uses cardreader changes to be sent in separate
commit, but could be changed to use i2c eeprom.
2017-09-27 11:20:10 -05:00
Scott Lahteine
c2b1d51f16
HAL whitespace and style cleanup
2017-09-27 10:55:36 -05:00
Scott Lahteine
c272f2c84e
Cleanup pins spacing
2017-09-27 10:55:36 -05:00
Scott Lahteine
dff2904c0f
Marlin code whitespace cleanup
2017-09-27 10:55:36 -05:00
Scott Lahteine
599f2ad983
Define pin accessors more like <Arduino.h>
2017-09-27 10:41:27 -05:00
Scott Lahteine
358656acc3
Tweak HAL_adc_start_conversion
2017-09-27 10:41:27 -05:00
Scott Lahteine
0cb4d25431
Tweaks to Servo classes
2017-09-27 10:41:27 -05:00
Phr3d13
10c1b442ca
Fixes for Anet10 and gt2560
...
Fixes for 2 "... not declared in this scope" compiler errors.
2017-09-27 07:34:02 -05:00
Phr3d13
5a3a53379f
Update pins for GT2560_Rev_A_Plus
...
For PR #7738
2017-09-27 06:34:51 -05:00
Scott Lahteine
fdf1b8a7b8
Fix sanity check for LCD_FOR_MELZI
...
Comes from #7760
2017-09-27 03:04:19 -05:00
Scott Lahteine
b93a55e15f
Fix ST7920_DELAY_2 potentially being unset
...
Comes from #7760
2017-09-27 03:04:01 -05:00
Scott Lahteine
ce1638e32f
Add Babystep Z graphic overlay
...
See PR #7593
2017-09-27 01:25:05 -05:00
Scott Lahteine
49c693c85b
Tweak to serial macros
2017-09-27 01:25:05 -05:00
Scott Lahteine
46709ed7e0
More featureful CR-10 configurations
...
See #7725
2017-09-27 01:25:05 -05:00
Scott Lahteine
2b112143fa
Update Sanguinololu config version
2017-09-27 00:48:59 -05:00
Scott Lahteine
7cd5eb6d42
Update LEVEL_BED_CORNERS config option
2017-09-27 00:48:59 -05:00
Scott Lahteine
981a610f75
Disable BABYSTEP_XY, add to SDSORT comment
2017-09-27 00:48:59 -05:00
Scott Lahteine
4c5be9bb05
Fix a PARKING_EXTRUDER comment
2017-09-27 00:48:58 -05:00
Scott Lahteine
494b0eba2d
Config spacing fix
2017-09-27 00:48:47 -05:00
Scott Lahteine
2281154025
Increase BABYSTEP_MULTIPLICATOR to 100
2017-09-27 00:48:46 -05:00
Scott Lahteine
92dbf5f148
Fix babystep edit label, allowing translation
2017-09-26 23:43:05 -05:00
Scott Lahteine
37eb6d1732
Babystepping code tweak
2017-09-26 23:43:05 -05:00
Scott Lahteine
7a29f802d0
Fix ENCODER_PULSES_PER_STEP for G3D_PANEL
2017-09-26 23:43:05 -05:00
Scott Lahteine
5972251b17
No need for unused LCD_PINS_Dn
2017-09-26 23:27:53 -05:00
GMagician
c508e9adec
Fix compiler error
...
Added missing include file,
called 'leveling_is_active()' with no prototipe defined.
2017-09-25 23:18:26 +02:00
Scott Lahteine
c4e4a0688c
Fix bug in SD Autostart
...
As pointed out by @marcio-ao in #7638
2017-09-24 17:53:39 -05:00
Scott Lahteine
6d5fcac54a
G33 changes from 1.1.x
2017-09-24 14:16:23 -05:00
Dave Johnson
f58ba3a64e
Improve AVR arch detection
...
Replace ARDUINO_ARCH_AVR with __AVR__ to better detect architecture for non-Arduino dev environments. Resolves compile failure in PIO for 8-bit Teensduino targets
More info:
https://forum.pjrc.com/threads/33234-Using-Teensyduino-Selecting-Teensy-3-2-3-1-board-has-incorrect-platform-define
http://www.atmel.com/webdoc/avrlibcreferencemanual/using_tools_1using_avr_gcc_mach_opt.html
2017-09-23 21:36:40 -07:00
Scott Lahteine
71d63fcafb
Apply LCD changes from 1.1.x
...
Changes from #7720
2017-09-23 21:50:44 -05:00
Scott Lahteine
1587962547
Combine G-code files into fewer units
...
Addressing #7707
2017-09-23 18:12:04 -05:00
Scott Lahteine
bfd1e75c04
Patch for caselight + lcd compile issues
2017-09-23 18:12:04 -05:00
Scott Lahteine
ff1f211eb4
Merge pull request #7695 from tcm0116/move_framework
...
Move LPC1768 framework out of Marlin source folder
2017-09-23 17:12:48 -05:00
Thomas Moore
ddbd4b73e0
Move LPC1768 framework out of Marlin source folder
2017-09-23 16:59:31 -05:00
GMagician
00b1b33816
Fix compiler warning
2017-09-23 15:31:51 +02:00
Scott Lahteine
f37ed314e0
Friendly layout for Arduino IDE
2017-09-21 16:27:13 -05:00
Scott Lahteine
06a02dd200
Workaround for SCK/MOSI pins on VIKI
2017-09-21 16:27:12 -05:00
Scott Lahteine
f9ef446fb5
Clean up after refactor
2017-09-21 16:27:12 -05:00
Scott Lahteine
64dfb46461
Move z_endstop_adj to Endstops
2017-09-21 16:27:11 -05:00
Scott Lahteine
2e20c53c9d
Move endstop debug to Endstops
2017-09-21 16:27:11 -05:00
Scott Lahteine
a10451ceed
Move Volumetric methods to Planner
2017-09-21 16:27:11 -05:00
Scott Lahteine
6f92ab7eed
Move Controller Fan to feature
2017-09-21 16:27:11 -05:00
Scott Lahteine
07cf75883f
Move T (tool change) to cpp
2017-09-21 16:27:10 -05:00
Scott Lahteine
927524af6b
Move M999 to cpp
2017-09-21 16:27:10 -05:00
Scott Lahteine
1a37ebc76d
Move M163-M165 MIXING_EXTRUDER to cpp
2017-09-21 16:27:10 -05:00
Scott Lahteine
8ca0b2fd68
Move M355 caselight to cpp
2017-09-21 16:27:09 -05:00
Scott Lahteine
59608086e6
Move M350_M351 to cpp
2017-09-21 16:27:09 -05:00
Scott Lahteine
6e0503eab2
Move M907-M910 to cpp
2017-09-21 16:27:09 -05:00
Scott Lahteine
2e89685154
Move TMC2130 g-codes to cpp
2017-09-21 16:27:09 -05:00
Scott Lahteine
19dde5be03
Move M900 to cpp
2017-09-21 16:27:08 -05:00
Scott Lahteine
1b0acbff72
Move M605 to cpp
2017-09-21 16:27:08 -05:00
Scott Lahteine
75cf17d816
Move M702 MK2_MULTIPLEXER to cpp
2017-09-21 16:27:08 -05:00
Scott Lahteine
7ba2ab4fb3
Move M540 to cpp
2017-09-21 16:27:07 -05:00
Scott Lahteine
a90c7dbf64
Move M500-M503 to cpp
2017-09-21 16:27:07 -05:00
Scott Lahteine
aab5489962
Move M428 to cpp
2017-09-21 16:27:07 -05:00
Scott Lahteine
1fe25271e4
Move M401_M402 to cpp
2017-09-21 16:27:07 -05:00
Scott Lahteine
0589884d26
Move M400 to cpp
2017-09-21 16:27:06 -05:00
Scott Lahteine
4a220a8b79
Move M380_M381 to cpp, solenoid feature
2017-09-21 16:27:06 -05:00
Scott Lahteine
9be8cb0ac9
Move M360-M364 to cpp
2017-09-21 16:27:06 -05:00
Scott Lahteine
828405cac8
Move M302 to cpp
2017-09-21 16:27:06 -05:00
Scott Lahteine
8584f7e390
Move M250 to cpp
2017-09-21 16:27:05 -05:00
Scott Lahteine
ebb9bd5419
Move M240 to cpp
2017-09-21 16:27:05 -05:00
Scott Lahteine
d4aaa0f1c8
Move M304 to cpp
2017-09-21 16:27:05 -05:00
Scott Lahteine
609c4eea32
Move M301 to cpp
2017-09-21 16:27:04 -05:00
Scott Lahteine
4f14849675
Move M300 to cpp
2017-09-21 16:27:04 -05:00
Scott Lahteine
6ed5252884
Move M280 to cpp
2017-09-21 16:27:04 -05:00
Scott Lahteine
d4d3d92f8a
Move M260_M261 to cpp
2017-09-21 16:27:04 -05:00
Scott Lahteine
3e761696a0
Move M226 to cpp
2017-09-21 16:27:03 -05:00
Scott Lahteine
0e319104c2
Move M220 to cpp
2017-09-21 16:27:03 -05:00
Scott Lahteine
234de3547c
Move M211 to cpp
2017-09-21 16:27:03 -05:00
Scott Lahteine
6c7bad8bc3
Move M666 to cpp
2017-09-21 16:27:03 -05:00
Scott Lahteine
f5877aa93e
Move M665 to cpp
2017-09-21 16:27:02 -05:00
Scott Lahteine
33861d4e04
Move M206 to cpp
2017-09-21 16:27:02 -05:00
Scott Lahteine
7aca9fe2f7
Move M203-M205 to cpp
2017-09-21 16:27:02 -05:00
Scott Lahteine
b3822b9242
M202 is unused
2017-09-21 16:27:02 -05:00
Scott Lahteine
5e63efc1d9
Move M201 to cpp
2017-09-21 16:27:01 -05:00
Scott Lahteine
92c15f5578
Move M150 to cpp
2017-09-21 16:27:01 -05:00
Scott Lahteine
eef4a54778
Move M119-M121 to cpp
2017-09-21 16:27:01 -05:00
Scott Lahteine
379f16558e
Move M118 to cpp
2017-09-21 16:27:00 -05:00
Scott Lahteine
811c32b85a
Move M117 to cpp
2017-09-21 16:27:00 -05:00
Scott Lahteine
1d2061c935
Move M115 to cpp
2017-09-21 16:27:00 -05:00
Scott Lahteine
81b8fbf4d6
Move M114 to cpp
2017-09-21 16:27:00 -05:00
Scott Lahteine
5d2681a105
Move M100 to cpp
2017-09-21 16:26:59 -05:00
Scott Lahteine
beb346e49f
Move M92 to cpp
2017-09-21 16:26:59 -05:00
Scott Lahteine
381b17e6a9
Move M18_M84, M85 to cpp
2017-09-21 16:26:59 -05:00
Scott Lahteine
a911215b0e
Move M82_M83 to cpp
2017-09-21 16:26:59 -05:00
Scott Lahteine
4b9d1b9f26
Move M80-M81 to cpp
2017-09-21 16:26:58 -05:00
Scott Lahteine
0c7ba52451
Move M149 to cpp
2017-09-21 16:26:58 -05:00
Scott Lahteine
cbf40f7ee9
Move M145 to cpp
2017-09-21 16:26:58 -05:00
Scott Lahteine
b464887ea1
Make BARICUDA a feature
2017-09-21 16:26:57 -05:00
Scott Lahteine
14a5d2a273
Move M113 to cpp
2017-09-21 16:26:57 -05:00
Scott Lahteine
06f3c8029e
Move M111 to cpp
2017-09-21 16:26:57 -05:00
Scott Lahteine
a831977dee
Move M110 to cpp
2017-09-21 16:26:57 -05:00
Scott Lahteine
7479ff98b7
Move M140, M190 to cpp
2017-09-21 16:26:56 -05:00
Scott Lahteine
5b3e49babd
Move M108, M112, M410 to cpp
2017-09-21 16:26:56 -05:00
Scott Lahteine
df0432c7c8
Move M155 to cpp, auto-report to Temperature
2017-09-21 16:26:56 -05:00
Scott Lahteine
df031ab100
Move M106_M107 to cpp
2017-09-21 16:26:56 -05:00
Scott Lahteine
99c4b9050a
Move M105 to cpp
2017-09-21 16:26:55 -05:00
Scott Lahteine
a41130f854
Temp stat LEDs
2017-09-21 16:26:55 -05:00
Scott Lahteine
2c1eda9e00
Move M75-M78 to cpp
2017-09-21 16:26:55 -05:00
Scott Lahteine
fc52fc72ac
Move M48 to cpp
2017-09-21 16:26:54 -05:00
Scott Lahteine
be8d913484
Move M43 to cpp
2017-09-21 16:26:54 -05:00
Scott Lahteine
10fab24e50
Move M42 to cpp
2017-09-21 16:26:54 -05:00
Scott Lahteine
69b664b6fe
Move M31 to cpp
2017-09-21 16:26:54 -05:00
Scott Lahteine
a442c34a1a
Move SD commands to cpp
2017-09-21 16:26:53 -05:00
Scott Lahteine
be0e4a4ad0
Consolidate pause, apply to M125, M600, M24
2017-09-21 16:26:53 -05:00
Scott Lahteine
adca4a9b79
Move M17 to cpp
2017-09-21 16:26:53 -05:00
Scott Lahteine
33e00b6cd6
Move M3-M5 to cpp
2017-09-21 16:26:53 -05:00
Scott Lahteine
04583d46af
Move M0_M1 to cpp
2017-09-21 16:26:52 -05:00
Scott Lahteine
04376975ce
Move G92 to cpp
2017-09-21 16:26:52 -05:00
Scott Lahteine
931aa79d85
Move G42 to cpp
2017-09-21 16:26:52 -05:00
Scott Lahteine
84ddae56a8
Move G38 to cpp
2017-09-21 16:26:51 -05:00
Scott Lahteine
b8adae0785
Move G31_G32 to cpp
2017-09-21 16:26:51 -05:00
Scott Lahteine
9db5d21837
Move G30 to cpp
2017-09-21 16:26:51 -05:00
Scott Lahteine
13136376ee
Move G27 to cpp
2017-09-21 16:26:51 -05:00
Scott Lahteine
a1ee1628e5
Move G20_G21 to cpp
2017-09-21 16:26:50 -05:00
Scott Lahteine
9b4aa5ea8b
Move G17-G19 to cpp
2017-09-21 16:26:50 -05:00
Scott Lahteine
94d9def81c
Move G12 to cpp
2017-09-21 16:26:50 -05:00
Scott Lahteine
56f4a43535
Move G5 to cpp
2017-09-21 16:26:50 -05:00
Scott Lahteine
760f29a88e
Move G4 to cpp
2017-09-21 16:26:49 -05:00
Scott Lahteine
4007cbfe9e
Move G2_G3 to cpp
2017-09-21 16:26:49 -05:00
Scott Lahteine
27f7e3fe6f
Hide problem pins in pin debug list
2017-09-21 16:26:49 -05:00
Scott Lahteine
9c21191f74
Rename SPI class to avoid conflict (good?)
2017-09-21 16:26:49 -05:00
Scott Lahteine
51f195e698
Move dwell to gcode
2017-09-21 16:26:48 -05:00
Scott Lahteine
4f1eadf41f
FILAMENT_WIDTH_SENSOR feature
2017-09-21 16:26:48 -05:00
Scott Lahteine
d5fe0fb02b
Consolidate PrintCounter
2017-09-21 16:26:48 -05:00
Scott Lahteine
551752eac7
Consolidate "bedlevel" code
2017-09-21 16:26:47 -05:00
Scott Lahteine
71aefc2e22
Move heater output to Temperature class
2017-09-21 16:26:47 -05:00
Scott Lahteine
63228fc453
Move volumetric flag to GCodeParser
2017-09-21 16:26:47 -05:00
Scott Lahteine
bf7af95db3
Move flow_percentage to Planner
2017-09-21 16:26:46 -05:00
Scott Lahteine
8dc2838d98
Move host keepalive to GcodeSuite
2017-09-21 16:26:46 -05:00
Scott Lahteine
8fbb833de9
Encapsulate RGB(W) LEDs
2017-09-21 16:26:46 -05:00
Scott Lahteine
a98e9874db
FWRETRACT as a feature
2017-09-21 16:26:46 -05:00
Scott Lahteine
722786966a
Add gcode.cpp, motion.*, queue.* - Apply to some G-codes.
2017-09-21 16:26:45 -05:00
Scott Lahteine
4231faf779
Initial split-up of G-code handlers by category
2017-09-21 16:26:45 -05:00
Scott Lahteine
e0a189a481
Consolidate Buzzer
2017-09-21 16:26:45 -05:00
Scott Lahteine
bca67a5b79
Main controller updates
2017-09-21 16:26:44 -05:00
Scott Lahteine
142d8aae56
Move debugging to serial.*
2017-09-21 16:26:44 -05:00
Scott Lahteine
a1e2b5da70
Fix LCD_PINS_Dn tests in pinsDebug_list.h
2017-09-21 16:26:44 -05:00
Scott Lahteine
038f82cc38
Fix L6470 init and options
2017-09-21 16:26:43 -05:00
Scott Lahteine
42e2dd9251
Build file updates
2017-09-21 16:26:43 -05:00
Scott Lahteine
614a86a380
SD file updates
2017-09-21 16:26:43 -05:00
Scott Lahteine
82fff87e16
Pins updates
2017-09-21 16:26:43 -05:00
Scott Lahteine
3d8a0ab4b2
Module updates
2017-09-21 16:26:42 -05:00
Scott Lahteine
0fcec02db5
LCD updates
2017-09-21 16:26:42 -05:00
Scott Lahteine
7dd0a46732
Language updates
2017-09-21 16:26:41 -05:00
Scott Lahteine
4a82e95c3e
Feature file updates
2017-09-21 16:26:41 -05:00
Scott Lahteine
d7ee81202f
Libs updates
2017-09-21 16:26:41 -05:00
Scott Lahteine
34101224c4
Inc updates
2017-09-21 16:26:41 -05:00
Scott Lahteine
f52a31a275
Core updates
2017-09-21 16:26:40 -05:00
Scott Lahteine
479652073b
Config updates
2017-09-21 15:52:17 -05:00
Scott Lahteine
54326fb06a
HAL updates
2017-09-21 15:52:17 -05:00
Scott Lahteine
7e42c7563c
Move build files into place
2017-09-12 14:51:06 -05:00
Scott Lahteine
b66d65f865
Move 'sd' files
2017-09-12 14:51:05 -05:00
Scott Lahteine
0b9a88d6ce
Move 'pins' files
2017-09-12 14:51:05 -05:00
Scott Lahteine
2b3b7d5d7f
Move 'thermistor' files
2017-09-12 14:51:05 -05:00
Scott Lahteine
0c9231fd04
Move 'module' files
2017-09-12 14:51:05 -05:00
Scott Lahteine
efa578d6b0
Move 'libs' files
2017-09-12 14:51:04 -05:00
Scott Lahteine
cc92e544a5
Move 'lcd' files
2017-09-12 14:51:04 -05:00
Scott Lahteine
5be07b5db2
Move 'inc' files
2017-09-07 07:42:55 -05:00
Scott Lahteine
9ea2ff950a
Move 'gcode' files
2017-09-07 07:42:55 -05:00
Scott Lahteine
4e4d16c92e
Move 'core' files
2017-09-07 07:42:55 -05:00
Scott Lahteine
fa5f9c2aec
Move 'feature' files
2017-09-07 07:42:54 -05:00
Scott Lahteine
f536c4dccb
Move configs
2017-09-06 06:28:30 -05:00
Scott Lahteine
48351fd6d5
Move root sources
2017-09-06 06:28:29 -05:00
Scott Lahteine
27cbb939b2
Clean up some HAL code
2017-08-31 18:36:53 -05:00
Christopher Pepper
b29b66feda
Temporary fix for odd stepper behaviour with servos
2017-08-31 18:33:07 -05:00
Christopher Pepper
8afe13b1a2
Fix compile issue when watchdog was disabled
2017-08-31 18:33:07 -05:00
Christopher Pepper
b908e38d08
Add needed platform defined gaurds to compile with Arduino IDE
...
Also removed explicit platform HAL directory inclusion from platformio.ini to make sure these errors are caught by Travis in the future
2017-08-31 18:33:07 -05:00
Scott Lahteine
a037ddbf7b
Other spacing tweaks
2017-08-31 18:33:07 -05:00
Scott Lahteine
2af62a5d8d
Apply spacing, const to some HAL code
2017-08-31 18:33:07 -05:00
kfazz
fa9ff6be6e
try to fix LIN_ADVANCE for 32bit
2017-08-31 18:33:07 -05:00
kfazz
18f97c4013
add HardwareSerial and SoftwareSerial for Re-ARM.
...
HardwareSerial has been tested on Uart0 (debug header) and Uart3 (i2c connector)
Software Serial has been tested to work bi-directionally at 9600 and 115200
using pins 6 and 63 on J5, and unidirectionally (write only) at 250000.
The code used to test was Teemuatlut's tmc2208 patch, and a few small changes to main used to echo recieved chars back to a host pc.
2017-08-31 18:33:07 -05:00
Bob-the-Kuhn
01fb45b4f8
hybrid PWM system
...
Uses PWM1 to directly control pins 4, 6 & 11 (servo 0, 1 & 3) and PWM1
generated interrupts to control other pins.
Interupt control of the servo pins had too much jitter so switched all
that we could to PWM1 direct control. The PWM1 direct control pins have
less than 1 microsecond pulse width jitter while the interrupt
controlled ones can have 20+ microseconds of jitter.
Also added insurance to the servo code in the "disable servo after move"
section.
2017-08-31 18:33:07 -05:00
Tannoo
94dd39b3b7
LCD_UBL_memory_slot_corrections ( #7516 )
...
* LCD_UBL_memory_slot_corrections
Changed the memory slot edit function to work with the
`settings.calc_num_meshes()`
* Add a little more safety margin...
* More corrections
Error handling when the EEPROM is not available.
2017-08-31 18:33:07 -05:00
Roxy-3D
8587c4e1ec
Minor corrections to 32-bit branch ( #7514 )
...
Mostly... clean up some compile time warnings for the 20x4 LCD Display.
2017-08-31 18:32:09 -05:00
Bob-the-Kuhn
7342d5c07a
ST7565
2017-08-31 18:31:43 -05:00
Bob-the-Kuhn
97444391e0
Servo & PWM support for LPC1768 ( #7500 )
2017-08-31 18:31:43 -05:00
Tannoo
859fa35287
Re-Arm bugfixes ( #7495 )
...
* UBL_correction
* RGB Map function
2017-08-31 18:31:43 -05:00
Bob-the-Kuhn
d80877d570
Set pinMode with every digitalWrite (legacy compatibility)
2017-08-31 18:31:07 -05:00
Chris Pepper
9a950e3a5a
Update the delay functions and change the default pinmap for character displays ( #7434 )
2017-08-31 18:31:07 -05:00
Scott Lahteine
105324b85b
Match the license headers in other files
2017-08-31 18:31:07 -05:00
Bob-the-Kuhn
69704b93f2
ultralcd.cpp fix compile error - switch to int16_t
2017-08-31 18:31:07 -05:00
Chris Pepper
61c0a10efe
Revert "SPI API platform implementation stubs" ( #7416 )
...
This reverts commit 2dfa6ca72a2e8d43caf4932ca0d35792f0638917.
Revert "Base HAL SPI Changes"
This reverts commit 2afc521b8b6a81b2281a038f1b99a69f4a008e64.
Revert "Initial HAL SPI API"
This reverts commit 58f7ffe09ab5bc034b6510f5204f8d342138abaa.
2017-08-31 18:31:07 -05:00
Chris Pepper
a5cf3a190c
bugfix-2.0.x critical fix ( #7401 )
...
* Fix mistake in gitignore file and add in missing core files.
The missing leading slash on "lib" meant all folders names lib in the directory tree are ignored, rather than just the top level PlatformIO lib folder
* Add LiquidCrystal Library and associated headers modified to compile.
2017-08-31 18:23:44 -05:00
Bob-the-Kuhn
76da81c1de
minimize SD card reads when using SDCARD_SORT_ALPHA (Re-ARM board)
...
Because of the Re-ARM card's pinout there is only one SPI connected to
the RepRap Discount Full Graphic LCD display. The LCD responds to ANY
SCK transitions no matter if it's enable is inactive. The result is
garbage (usually bars) on the LCD display whenever there is SD card
activity.
This code minimizes this by only accessing the SD card when changing
directory levels if :
SDCARD_SORT_ALPHA is enabled
SDSORT_USES_RAM is true
SDSORT_CACHE_NAMES is true
The code changes result in file names being pulled from the ALPHA SORT
memory array rather than the SD card.
The code also gives the file count and file index functions their own
variables. When they shared a common variable the index function
sometimes resulted in the file count being short by 1.
=======================================================================
cardreader.cpp & pins_RAMPS_RE_ARM.h changes
Added another condition to cardreader.cpp to enable getting file names
only from RAM.
pins_RAMPS_RE_ARM.h :
Added comments about the SD card accesses and the LCD display
Combined all versions into this one.
2017-08-31 18:23:44 -05:00
Bob-the-Kuhn
84a11cfedc
HAL compatible pinsDebug & misc
...
Re-ARM has been tested. AVR has not been tested.
1) moved all cpu specific items to files in the low level HAL directory
for that CPU (pinDebug_Re-ARM.h & pinsDebug_AVR_8_bit.h
2) added pinsDebug.h to the top level directory
3) modified HAL_pinsDebug.h to select the correct support file for the
selected CPU
4) Patched sanitycheck to stop throwing false errors. A long term
solution will be done
5) misc changes & bug fixes
arduino.cpp - included macros.h to fix a missing definition
pinmap_re-arm.h - removed a duplicated line.
pinmapping.h - changed from "ENABLED" to "defined" to fix a compile
error
======================================================================
split SanityCheck up, improve pinsDebug system
======================================================================
switch to latest pins_RAMPS_RE_ARM.h
2017-08-31 18:23:44 -05:00
Christopher Pepper
32e759c928
SPI API platform implementation stubs
2017-08-31 18:23:44 -05:00
Christopher Pepper
4183a249b6
Moved CMSIS and other LPC1768 dependencies
...
Fixes Arduino IDE builds for 8-bit AVR,
misc: Adafruit NeoPixel currently incompatible with Teensy 3.5-6, blacklisted
2017-08-31 18:23:44 -05:00
Christopher Pepper
b55295ad33
Post merge fix
...
Add macros.h to allow Enabled macro, also need to reference include files directly
2017-08-31 18:23:44 -05:00
Christopher Pepper
c66d1ac651
Debug Pins Support
2017-08-31 18:21:38 -05:00
Christopher Pepper
a31e32969f
Base HAL SPI Changes
2017-08-31 18:21:38 -05:00
Christopher Pepper
bcd050f33b
Initial HAL SPI API
2017-08-31 18:21:38 -05:00
Christopher Pepper
44b0c186a6
HAL for Re:ARM (LPC1768) architecture
2017-08-31 18:21:38 -05:00
teemuatlut
f3e562e46e
HAL for 32-bit Teensy (3.5, 3.6) architecture
2017-08-31 18:15:07 -05:00
Christopher Pepper
cfef925559
HAL for DUE architecture
2017-08-31 18:15:07 -05:00
Christopher Pepper
4b16fa3272
Implement HAL and apply macros across code-base
...
Implement AVR Platform
2017-08-31 18:14:31 -05:00
Scott Lahteine
e4fcf460e7
Marlin bugfix-2.0.x Version/README
2017-08-31 17:56:08 -05:00
Scott Lahteine
367e1b54ba
Merge pull request #7591 from thinkyhead/bf1_misc_patches
...
M111: no args reports current flags
2017-08-31 15:19:29 -05:00
Scott Lahteine
8a184a526a
Marlin: Patch G33, allow M111 to give status
2017-08-31 14:35:00 -05:00
Scott Lahteine
353c23b16e
Enforce BED_CENTER_AT_0_0 on Delta, SCARA
2017-08-31 14:34:59 -05:00
Scott Lahteine
898f48e331
CNC workspace planes for G5
...
According to LinuxCNC, G5 should throw an error if the current plane mode isn't XY.
2017-08-31 14:29:29 -05:00
Scott Lahteine
5851c2d36f
MAX7219 followup ( #7564 )
...
* Add MAX7219_DEBUG to Travis CI testing
* Tweak config and use standard pin naming for MAX7219_DEBUG
* MAX7219: Apply coding standards, use macros, etc.
* Make code work...
2017-08-31 11:44:43 -05:00
Scott Lahteine
52073f21c5
Merge pull request #7556 from thinkyhead/bf1_slovak_language
...
Slovak UTF-8 translation
2017-08-27 21:05:53 -05:00
Scott Lahteine
321f98f867
Fix servo delay in Folgertech config
2017-08-27 20:53:27 -05:00
jneilliii
36771e9492
Fixes required for Creality CR-10
2017-08-27 20:39:16 -05:00
Roxy-3D
3f0b38ed5d
Add Max7219 LED Matrix Debug Support ( #7563 )
...
* Add Max7219 LED Matrix Debug Support
The Max7219 8x8 LED Matrix's are very helpful for debugging new code.
And for that matter, just trying to maximize printer settings without
causing stuttering.
The displays are very inexpensive (under $2.00 with shipping) and
provide a lot of help when trying to debug complicated code.
* Try to keep Makefile up to date.
2017-08-25 17:03:07 -05:00
GMagician
0067bb2840
Addressing #7552
...
When M405 is used it changes 'volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]' value. When M406 disables M405 it leaves the value unchanged.
This PR applies 'calculate_volumetric_multipliers' in M406 instead of resetting it to 1.0 because M200 may not be compatible with M405 hence I'm sure to restore anyway with correct value.
2017-08-25 03:23:16 -05:00
Scott Lahteine
2b12093589
Merge pull request #7532 from thinkyhead/bf1_fan_mux_vben
...
New feature: Part-Cooling Fan Multiplexer
2017-08-25 03:16:40 -05:00
Michal Holes
54d48130f3
Slovak UTF-8 translation
...
Slovak UTF-8 translation
2017-08-23 19:14:35 -05:00
Scott Lahteine
86c024ce98
Organize, document pins.h include lines
2017-08-23 18:33:00 -05:00
Scott Lahteine
c7b07d20f2
Minor patches to pins files
2017-08-23 18:32:59 -05:00
Scott Lahteine
356af7dcb0
Tweak Sanguinololu-related pins files
2017-08-23 18:32:59 -05:00
Scott Lahteine
11a724d8fc
Sanguinololu example configuration
2017-08-23 18:32:59 -05:00
Scott Lahteine
e337df2e98
Miscellaneous tweaks to serial outputs, code cleanups
2017-08-23 18:32:58 -05:00
Vben
c0409b85e7
New feature: Part-Cooling Fan Multiplexer
2017-08-18 15:59:04 -05:00
Scott Lahteine
e82e9073d6
Merge pull request #7530 from GMagician/Code-reduction
...
Code reduction with some configurations
2017-08-18 13:57:59 -05:00
GMagician
6127154af3
Fix identation by tab
...
There was a tab instead of spaces
2017-08-18 11:34:55 +02:00
GMagician
b94a1c6b9f
Code reduction this some configurations
...
When switching noozle and extruder but these operations are done by the same servo in 'setup' function there is a unnecessary call
2017-08-18 11:11:00 +02:00
GMagician
405a2132f3
#7529 compile fix
...
I made an error in previous fix
2017-08-17 22:04:28 +02:00
GMagician
869d7f3703
#7504 missing part
...
#7504 integration has missed this part.
When more than 1 servo is used with bltouch it's impossible to predefine default servo delay for it.
In my original fix I completely removed this part but maybe this is a better compromise
2017-08-17 21:43:47 +02:00
Scott Lahteine
101ba70517
Merge pull request #7505 from thinkyhead/bf1_anet_1_pio
...
Add Anet 1.0 to Platformio.ini
2017-08-17 00:33:20 -05:00
Vben
4817b39d98
Added new feature for AutoParking Extruder (APE)
2017-08-16 17:33:11 -05:00
Scott Lahteine
6772e33ef6
Use [XY]_CENTER for error correction
...
Followup to #7512
2017-08-16 16:13:09 -05:00
Scott Lahteine
385f1bb9e5
Merge pull request #7504 from thinkyhead/bf1_servo_delays
...
Individual servo delays
2017-08-16 16:05:22 -05:00
Scott Lahteine
2a31c9f2ce
Merge pull request #7515 from cdedwards/bugfix-1.1.x
...
Fix for G26 spam output
2017-08-16 16:01:10 -05:00
MTrab
5fa61c0ad3
Add Anet 1.0 to Platformio.ini
...
Added env:anet10 to platformio.ini for easy compile and upload to this board
2017-08-16 15:59:20 -05:00
Scott Lahteine
b3f59ec945
Merge pull request #7519 from thinkyhead/bf1_cleanups_aug_16
...
Add "Level Corners" menu item
2017-08-16 15:58:15 -05:00
Tannoo
b33739d493
UBL_Language_Update ( #7520 )
...
* UBL_Language_Update
Translatable strings
* Use slightly better wording...
* Use slightly better wording...
2017-08-16 09:49:04 -05:00
Scott Lahteine
a1878cd1c0
Add "Level Corners" menu option
2017-08-16 02:54:33 -05:00
Scott Lahteine
0a18fb735e
Use "PSU" label to fit on screen
2017-08-16 02:51:00 -05:00
Scott Lahteine
30887feae3
Tweak some formatting in ABL G29
2017-08-16 02:51:00 -05:00
Thomas Moore
257b693ab0
Advanced pause fixes ( #7518 )
...
* Disallow filament change while paused
* Use kinematic movemements in pause_print and resume_print
2017-08-15 22:57:13 -05:00
Tannoo
ab2ac1af71
UBL_LCD_storage_corrections ( #7517 )
...
Correcting the storage selection.
Also EEPROM error handling on the LCD.
2017-08-15 21:01:11 -05:00
cdedwards
f1843211e6
Fix for G26 spam output
...
while heating, G26 will continuously spam the heater states instead of printing it out every 5000ms.
2017-08-15 17:04:53 -06:00
Roxy-3D
be5ca34215
Allow G29 to work correctly even if nozzle is off the mesh. ( #7512 )
...
* work around previous regressions...
2017-08-15 17:04:52 -05:00
Scott Lahteine
06541ec885
Merge pull request #7448 from thinkyhead/bf1_delta_fixes
...
Prevent damage if DELTA_HEIGHT is set badly
2017-08-15 16:35:09 -05:00
GMagician
e9c72978c7
Implement SERVO_DELAY as array
...
This modify give SERVO_DELAY x servo basis
2017-08-15 00:28:47 -05:00
Scott Lahteine
96ae53cf41
Use MOVE_SERVO macro where possible
2017-08-15 00:28:39 -05:00
Scott Lahteine
3be9c19f12
Hold on move axis screens
2017-08-14 22:51:47 -05:00
Scott Lahteine
8fd58cd6dc
Patch goto labels for consistency
2017-08-14 22:51:47 -05:00
Scott Lahteine
75e6f72c89
Fix hexadecimal number formatting
2017-08-14 22:50:44 -05:00
Scott Lahteine
ac76101ec3
Eliminate goto in gcode_M48
2017-08-11 17:00:40 -05:00
Scott Lahteine
75e6ead5fd
Eliminate goto in gcode_G33
2017-08-11 17:00:40 -05:00
Scott Lahteine
6bd63d27b5
Updates to G29 for probe error handling
2017-08-11 17:00:40 -05:00
Thomas Moore
f54e0fc90f
Prevent damage if DELTA_HEIGHT is incorrect
2017-08-11 16:09:14 -05:00
Scott Lahteine
0938c62b48
Neater position_is_reachable call
2017-08-11 15:55:32 -05:00
Scott Lahteine
9d95b1b4df
Tweak Conditionals_post.h
2017-08-11 15:55:32 -05:00
Scott Lahteine
35d5a7bdff
Tweak CR-10 config/pins
2017-08-11 15:55:31 -05:00
Scott Lahteine
419c8969a7
Merge pull request #7479 from thinkyhead/bf1_fix_italian
...
Fix Italian string length
2017-08-10 18:42:35 -05:00
Frederik Kemner
25a11cd485
Use bed size and inset instead of travel limits to define mesh area\n\nAs proposed in #7435 ( #7480 )
2017-08-10 16:53:04 -05:00
Scott Lahteine
7f3406d47b
Fix Italian string length
...
Addressing #7264
2017-08-10 15:41:35 -05:00
Jozsef Kiraly
97c21e9007
Support for Geeetech GT2560 Rev.A/Rev.A+
2017-08-06 00:42:54 -05:00
Scott Lahteine
b2822a59f9
Add a sanity check for valid bed size
2017-08-05 03:49:04 -05:00
Scott Lahteine
a7e5c1bf19
Use float to init TMC2133 steps-per-mm
2017-08-05 03:48:52 -05:00
Scott Lahteine
dd66d21749
Extend DEACTIVATE_SERVOS_AFTER_MOVE sanity-check
...
As proposed in #7429
2017-08-05 03:48:52 -05:00
richarddeweerd
b370906031
Example config for Geeetech I3 Pro X with GT2560 controller
2017-08-05 03:48:52 -05:00
Scott Lahteine
804818b4d9
Bring configs up to date
2017-08-05 03:48:52 -05:00
Scott Lahteine
dd841a3675
Merge pull request #7410 from benlye/user-script-feedback
...
Make audible user script feedback optional
2017-08-05 02:59:56 -05:00
Florian Heilmann
0fd2923a9f
Fix compilation with ADVANCED_PAUSE_FEATURE without SDSUPPORT ( #7412 )
...
* Fix compilation of ADVANCED_PAUSE_FEATURE without SDSUPPORT
* Fix Identation
* Make use of IS_SD_PRINTING macro
as per @MagoKimbra
2017-08-05 02:58:38 -05:00
benlye
24af9e1bf4
Make audible user script feedback optional
...
Add a parameter to enable/disable audible user script feedback
2017-08-04 17:24:10 +01:00
Florian Heilmann
6827a162bb
Update language_de.h
...
Add
MSG_BLTOUCH
MSG_DELTA_SETTINGS
MSG_UBL_MESH_EDIT
MSG_UBL_OUTPUT_MAP_BACKUP
MSG_UBL_STEP_BY_STEP_MENU
MSG_Z_FADE_HEIGHT
2017-08-04 09:35:21 +02:00
Scott Lahteine
3497153cf1
Followup cleanup patch
...
Fix regression in #7428
2017-08-03 14:55:22 -05:00
Scott Lahteine
16f8c4865a
Merge pull request #7409 from FHeilmann/bf_update_ru_translation
...
Update Russian Translation
2017-08-03 14:54:40 -05:00
Scott Lahteine
622048ffb0
Clean up whitespace, trailing space, bad tab conversion, etc.
2017-08-03 11:20:03 -05:00
Roxy-3D
2cbdc0ebb6
Fix large Z corrections when nozzle moves off of UBL mesh ( #7415 )
2017-08-02 16:51:04 -05:00
Florian Heilmann
650e5274c4
Update Russian Translation
2017-08-02 21:19:15 +02:00
Scott Lahteine
ce65c13a97
Merge pull request #7398 from fiveangle/bf_lcd_bed_level_requirements
...
Clarify LCD_BED_LEVELING requirements
2017-08-01 17:46:07 -05:00
Dave Johnson
936dfb965c
Clarify LCD_BED_LEVELING requirements
...
LCD_BED_LEVELING requires PROBE_MANUALLY with auto bed leveling enabled. See #7396
2017-08-01 14:13:54 -07:00
Kai
ffe3013bb5
Fix for #7395
...
Filament change causes freeze during paused print. This PR disables Filament change in the prepare menu when a print from SD Card is paused. See #7395
2017-08-01 21:45:41 +02:00
Øystein Krog
e948f77cf9
Fix DUAL_X_CARRIAGE not moving at all
...
Axis would only move when homing.
Bug introduced in 91841d75c9Fixes #6956 , fixes #7050 and fixes #7291
2017-07-31 18:44:26 +02:00
Scott Lahteine
08b0456d91
Merge pull request #7379 from thinkyhead/bf_manual_bed_level_floor
...
Manual Bed Leveling: Goto previous Z height at each probe point
2017-07-30 05:41:12 -05:00
teemuatlut
936d00dda8
Implement probing delay for piezo sensors
2017-07-29 21:46:40 -05:00
Scott Lahteine
29eef360d0
Merge pull request #7308 from thinkyhead/bf_cleanup_config_adv
...
Fixes for FWRETRACT
2017-07-29 21:20:19 -05:00
Wilfried Chauveau
894608f8a3
Manual Bed Leveling: Goto previous Z height at each probe point
2017-07-29 21:15:37 -05:00
Scott Lahteine
ff06e1a030
Merge pull request #7372 from tcm0116/delta_calib_menu
...
Move Delta Calibration menu to the Prepare menu
2017-07-29 21:05:03 -05:00
Thomas Moore
15e009b6ca
Move Delta Calibration menu to the Prepare menu
2017-07-28 08:33:18 -05:00
Scott Lahteine
bfd396c13a
Patch to fix some compiler warnings
2017-07-28 02:27:16 -05:00
Scott Lahteine
48c5f3dddf
Tweak kill action #ifdef
2017-07-27 23:42:01 -05:00
Scott Lahteine
be7a9a07c5
Don't reset grid with G29 Q + PROBE_MANUALLY
2017-07-27 22:47:43 -05:00
Scott Lahteine
dfe670247d
Merge pull request #7363 from marcio-ao/bugfix-1.1.x
...
Makefile fixes and U8G support.
2017-07-27 21:31:56 -05:00
Marcio Teixeira
af83c512b8
Added support for U8G.
2017-07-27 07:49:25 -06:00
Scott Lahteine
4eff18854b
Rename options with swap_ prefix
2017-07-27 04:14:29 -05:00
Scott Lahteine
14482d2f2a
Strip auto-retract for impossible M(IN|AX)_AUTORETRACT combo
2017-07-27 04:14:29 -05:00
Scott Lahteine
9fc72422e4
Don't let the flow multiplier affect retract/recover length
2017-07-27 04:14:29 -05:00
Scott Lahteine
fee696db5d
Improve retract() for G10/G11/autoretract
2017-07-27 04:14:29 -05:00
Scott Lahteine
423b0f3a1e
Replace MIN_RETRACT with MIN_AUTORETRACT, MAX_AUTORETRACT
2017-07-27 04:14:29 -05:00
Scott Lahteine
51864fd365
Add bed size as a configuration option
2017-07-26 23:04:54 -05:00
Scott Lahteine
dc7c95e07b
Remove @ section fwretract
2017-07-26 22:46:16 -05:00
Dave Johnson
4718c09c48
Remove extraneous USBCON defines for AT90USB boards
...
USBCON is definied by serial.h pullikng in MarlinConfig.h which in turn pulls in Arduino.h. Defining in later includes has shown to cause compile issues so removing all extraneous calls for and potentially easier future linker troubleshooting.
more USBCON unification
2017-07-23 16:41:48 -07:00
C. Scott Ananian
890e7a16a9
Add support for Printrbot Neopixel RGBW strip.
...
Connected as described at http://printrbot.com/shop/led-strip/
Based on patch by Kelly Anderson <kelly@xilka.com> at
http://www.xilka.com/printrbot/marlin/1.1.4/20170707/
2017-07-22 16:07:55 -05:00
Scott Lahteine
a059e95463
Bring Infitary i3 config up to date
2017-07-21 20:49:19 -05:00
Scott Lahteine
d6d6043548
Merge pull request #7338 from thinkyhead/bf_mks_ps_on_pin
...
MKS 1.3+: Add pin mapping for PS_ON
2017-07-21 20:00:26 -05:00
Alexey Shvetsov
851f9f5399
Update Russian translation - Part 1
...
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
2017-07-21 19:32:37 -05:00
Scott Lahteine
b7a16e4468
Merge pull request #7315 from fixoid/patch-1
...
Fixing SWITCHING_EXTRUDER feature to work with HOTENDS > 1
2017-07-21 19:10:54 -05:00
Alexey Shvetsov
f38b8c5bf8
MKS 1.3+: Add pin mapping for PS_ON
...
This allows the use of D4 as PS_ON since MKS Gen doesn't have a PS_ON pin. However this effectively allows only 3 servos (instead of 4).
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
2017-07-21 18:50:05 -05:00
Scott Lahteine
8a3bc6be4d
Improve FWRETRACT config options and commentary
...
Add more details as requested in #7198
2017-07-20 22:57:50 -05:00
Scott Lahteine
b0173ccdb9
Drop extra initializers for vars initialized by EEPROM code
2017-07-20 22:57:49 -05:00
Scott Lahteine
7afafb05b8
Split G10/G11 into separate functions
2017-07-20 02:24:13 -05:00
Scott Lahteine
c45798694f
Add some more requirements to the G-code list
2017-07-20 02:24:13 -05:00
Scott Lahteine
72de280c1e
BARICUDA valve pressure consistently uint8_t
2017-07-20 02:21:40 -05:00
Scott Lahteine
4d98e3f0a7
General cleanup
2017-07-20 02:21:40 -05:00
fixoid
e530c67349
Fixing SWITCHING_EXTRUDER feature
2017-07-19 21:15:26 +03:00
Tannoo
2ad3ca5d8a
Bugfix ( #7310 )
2017-07-18 22:55:14 -05:00
Roxy-3D
37a6833d7e
Allow the sampled point to be added into the Least Squares Best Fit ( #7289 )
...
Without this... The LSF won't work because none of the sampled points
in this code block get added.
2017-07-13 16:33:02 -05:00
C. Scott Ananian
a519b093b9
Fix build by replacing qr_solve by least_squares_fit. ( #7285 )
...
This was broken by 9af67e2446
2017-07-13 12:02:15 -05:00
Scott Lahteine
0873c667fa
Apply coding standards to recent merges
2017-07-13 00:46:16 -05:00
Scott Lahteine
8c2907d10f
Fix ABL broken by recent change
2017-07-12 22:56:18 -05:00
Roxy-3D
9af67e2446
Save 7714 bytes of program memory when doing AUTO_BED_LEVELING_LINEAR ( #7276 )
...
We can save more and a pile of RAM by eleminating the eqnBVector and
EqnAMatrix arrays next.
2017-07-10 19:05:11 -05:00
Scott Lahteine
76e90b93b7
Volatile keyword not needed for parser.seen
2017-07-10 15:38:54 -05:00
Jamie Bainbridge
00e4ced58e
Stay in User Menu after command. Add feedback.
...
When a user executes a User Menu command, the LCD returns to the main menu. If the user has multiple menu items they want to run, such as one menu item per bed leveling corner, then it's better to stay in the User Menu rather than return to the main menu.
This PR modifies Marlin to stay in the User Menu after a command.
2017-07-10 13:47:12 -05:00
Scott Lahteine
1066b17457
Merge pull request #7260 from thinkyhead/bf_G33_update_27
...
Updates to G33 and its LCD code
2017-07-10 13:39:36 -05:00
Tannoo
e927941c06
Bugfix ( #7265 )
...
Fix compile error when UBL is enabled but there is no LCD Panel.
2017-07-08 09:44:50 -05:00
Scott Lahteine
68aea9c01d
Merge pull request #7261 from thinkyhead/bf_configs_by_vendor
...
Arrange more example configs by vendor
2017-07-07 15:46:22 -05:00
Tannoo
aaacef9441
Corrections ( #7231 )
...
20x4 map integration. Also some minor changes to the UBL Menu layout. Both 20x4 LCD's and Graphical LCD panels should have similar functionality now.
2017-07-07 11:05:08 -05:00
LVD-AC
4bc79ec877
Updates for G33-LCD interface
2017-07-07 05:00:59 -05:00
Scott Lahteine
186580b55f
Arrange example configurations by vendor
2017-07-07 04:48:23 -05:00
Scott Lahteine
6be369f3ea
Add some config names to AUTHOR
2017-07-07 04:46:33 -05:00
Scott Lahteine
7fc31a7940
Merge pull request #7258 from thinkyhead/bf_cleanups_jbrazio
...
Add support for BQ heated bed kit with Hephestos 2
2017-07-07 04:11:07 -05:00
Scott Lahteine
11e376e920
Merge pull request #7256 from thinkyhead/bf_cleanup_july_6
...
Assign -1 to LCD_PINS_D4-7 if not defined
2017-07-07 03:22:47 -05:00
João Brázio
2065591daf
Add support for BQ heated bed kit with Hephestos 2
2017-07-07 03:10:38 -05:00
essgcee
61be28133d
Support for Creality CR-10
...
Creality board is a Melzi / Sanguinololu variant, but using different pins for LCD control (and maybe other minor variations)
2017-07-06 23:08:10 -05:00
Scott Lahteine
9248a90a4c
Assign -1 to LCD_PINS_D4-7 if not defined
2017-07-06 22:47:51 -05:00
Scott Lahteine
5ef1e5ef60
Tweaks for M43
2017-07-06 21:47:50 -05:00
Scott Lahteine
c7732db99d
Fix: Use of digitalRead, digitalWrite breaks on AT90USB
2017-07-06 21:25:56 -05:00
Scott Lahteine
f713f25fa5
Clean up excess whitespace
2017-07-06 21:24:30 -05:00
Scott Lahteine
fc9ce65095
Add BUSY_WHILE_HEATING for hosts that need it
2017-07-06 16:28:57 -05:00
Scott Lahteine
c6d430670a
Clear SHOW_BOOTSCREEN with no LCD
2017-07-06 14:21:27 -05:00
Scott Lahteine
11c589c3ec
Fix compile issue with G38
...
Fixes #7250
2017-07-06 14:21:27 -05:00
Scott Lahteine
678914be25
Patch M23 to work around Simplify3D bug
...
Addressing #7227
2017-07-06 14:00:58 -05:00
LVD-AC
3efe4aeef8
Add PROBE_MANUALLY support to G33
2017-07-04 18:06:54 -05:00
Scott Lahteine
cca1cca3a5
Merge pull request #7237 from thinkyhead/bf_cz_mapper
...
UTF-8 mapper for Czech
2017-07-04 16:45:13 -05:00
Scott Lahteine
a2babb532d
Merge pull request #7217 from benlye/add-kill-action
...
Add configurable action command to send when printer is killed
2017-07-04 16:44:08 -05:00
Petr Zahradník
8c34233452
UTF-8 mapper for Czech
2017-07-04 15:51:23 -05:00
Dave Johnson
20f6676d63
DISABLE_[XYZ] compatibility check
...
DISABLE_[XYZ] is incompatible with HOME_AFTER_DEACTIVATE and Z_SAFE_HOMING
2017-07-03 17:23:53 -07:00
Ben Lye
c28749a567
Add kill action
...
Sends pre-defined string as action command when printer is kill.
2017-07-03 23:45:19 +01:00
Scott Lahteine
df87278fce
Add "CAP:PRINT_JOB:1" (M75 / M76 / M77) to M115 output
2017-07-03 15:59:06 -05:00
Scott Lahteine
4be8d7720e
Fix spelling of "Chinese"
2017-07-03 15:24:49 -05:00
LVD-AC
567941e341
Fix for issues #6997 and #7152
...
Probing with the effector in the printing area, but an eccentric probe (e.g. allen key) outside it but still touching the bed gives meaninfull information for calibration. Since calibration is most accurate when probing as close to the towers as possible the testing was way to restrictive hence this fix.
2017-07-03 02:53:49 -05:00
Scott Lahteine
57fff2e95e
Merge pull request #7219 from thinkyhead/bf_update_git_scripts
...
Update Marlin+git helper scripts
2017-07-03 01:49:27 -05:00
Scott Lahteine
6a3967ee33
Corrections for probe_pt parameters
2017-07-03 01:34:27 -05:00
Scott Lahteine
534bffa7a9
Correct comment on ABL G29
2017-07-03 01:13:07 -05:00
Scott Lahteine
e1e1a0c344
Provide a default CUSTOM_BOOTSCREEN_TIMEOUT
2017-07-03 01:13:07 -05:00
Scott Lahteine
69297b2d7b
Make all EEPROM optimization options available
2017-07-02 20:47:03 -05:00
Scott Lahteine
d609489b22
Drop setup_homepin
2017-07-02 02:27:09 -05:00
Scott Lahteine
167169e1bf
Sanity check for a real probe with M48
2017-07-02 02:27:09 -05:00
Scott Lahteine
395a9f59ac
Merge pull request #7211 from thinkyhead/bf_lcd_bootscreen
...
Use lcd_bootscreen for both
2017-07-02 02:11:07 -05:00
Scott Lahteine
14663efe0d
Merge pull request #7210 from fiveangle/printrboard_revf_cleanup
...
Printrboard RevF cleanup
2017-07-02 01:02:26 -05:00
Scott Lahteine
ae5923a3d0
Make lcd_bootscreen common to both
2017-07-02 00:47:36 -05:00
Scott Lahteine
859248433f
Patch for gcode debug
2017-07-02 00:47:35 -05:00
Dave Johnson
09c90c2f6c
Printrboard RevF Cleanup
...
-Update Arduino IDE extension descriptions
-Set default motor currents if not defined in Configuration_adv.h
-Support for MINIPANEL LCD
-Support for choosing internal or panel SD
2017-07-01 22:33:39 -07:00
Scott Lahteine
232a10410d
LCD_FOR_MELZI
2017-07-01 22:32:20 -05:00
Scott Lahteine
76c92a1fab
Clean up some trailing spaces
2017-07-01 22:32:20 -05:00
Scott Lahteine
cf96109056
Implement the EEPROM_CHITCHAT option
2017-07-01 21:48:18 -05:00
Scott Lahteine
dcec7178d1
Expose DISABLE_M503 option as a test option
2017-07-01 21:31:28 -05:00
Scott Lahteine
3e78a01262
Merge pull request #7204 from thinkyhead/bf_update_ubl_lcd
...
UBL radar map corrections
2017-07-01 20:59:03 -05:00
Tom
1ff7d10c80
Add configuration for Infitary M508 (i3 clone)
...
Based on Infitary's own firmware settings.
2017-07-01 20:04:08 -05:00
Scott Lahteine
4cb45c10dd
Patch ubl lcd mesh map indentation
2017-07-01 19:47:52 -05:00
Scott Lahteine
abd6ba62b4
Some cleanups for ubl lcd mesh map
2017-07-01 19:47:49 -05:00
Scott Lahteine
f17bae1f70
Changes for ubl_lcd_map_control patch
2017-07-01 19:47:02 -05:00
Tannoo
8e0f3b7eba
UBL radar map corrections
2017-07-01 19:00:44 -05:00
Bob-the-Kuhn
fcceed5be6
intermittent Teensy & G26 compile problem
...
===============================================
also an issue with ubl_motion.cpp
2017-07-01 14:41:24 -05:00
Scott Lahteine
30b327d24c
Finish the solution for #7166
2017-06-29 15:17:39 -05:00
Scott Lahteine
6c97c5595c
Add a sanity check for DELTA_AUTO_CALIBRATION
2017-06-29 15:03:19 -05:00
Bob-the-Kuhn
e6e3132f79
make LETTTER_OFF return values that match param indices range
2017-06-29 09:01:58 -05:00
Bob-the-Kuhn
bfbf5f8200
correct value_bool() when FASTER_GCODE_PARSER is enabled
...
Also corrected compile issue when DEBUG_GCODE_PARSER and
AUTO_BED_LEVELING_UBL are both enabled.
2017-06-28 19:51:08 -05:00
Scott Lahteine
406ef69702
Move Anet A8 config to subfolder
2017-06-28 16:58:57 -05:00
Scott Lahteine
379926961c
Add Anet A6 config, edit Anet A8 config
2017-06-28 16:58:57 -05:00
Scott Lahteine
5b03f23fa2
Bring configurations up to date, fix some comments
2017-06-28 16:41:49 -05:00
Scott Lahteine
e3cedfa0ec
Fix a compiler warning
2017-06-28 16:41:46 -05:00
Scott Lahteine
bb0508b6cf
Fix comment in M115 code
2017-06-28 13:08:33 -05:00
Scott Lahteine
85777a56c6
Add A (action) and E (echo) parameters to M118
2017-06-28 02:07:59 -05:00
Scott Lahteine
d1e8d4cd9d
Merge pull request #7167 from thinkyhead/bf_20x4_lcd_update
...
UBL Map Cleanup and LCD display
2017-06-28 01:20:22 -05:00
Scott Lahteine
b492e0878d
Changes to reduce and simplify
2017-06-28 01:10:30 -05:00
Ben Lye
98d362c2da
Adding M118 command to send text to serial
...
Allows the user to send text to the serial console in order to
communicate with a host - sending debuging information or action
commands, for example. Text must begin with '//' and this is added if
it is not already present at the beginning of the string.
2017-06-28 00:55:20 -05:00
Tannoo
80abc872f3
Updated to better support the coming "radar"
2017-06-27 22:51:58 -05:00
Tannoo
e90cbf5c16
UBL Map Cleanup
2017-06-27 22:51:58 -05:00
Scott Lahteine
fc140c4962
Followup for I2C_POSITION_ENCODERS
2017-06-27 20:46:40 -05:00
Scott Lahteine
f4246dc8ff
Merge pull request #7165 from thinkyhead/bf_parser_shorthand
...
Use parser.seenval, add shorthand functions
2017-06-27 18:57:48 -05:00
Scott Lahteine
bd776df8c1
Optimize seen_axis by moving 'X' to index 24
2017-06-27 18:47:11 -05:00
Scott Lahteine
05449cf6ee
Add shorthand value accessors to gcode.h
2017-06-27 18:39:41 -05:00
Scott Lahteine
12f092c812
Cleanups to gcode.h, use seenval()
2017-06-27 17:57:00 -05:00
Scott Lahteine
941943c167
Apply const, spacing, etc.
2017-06-27 05:23:49 -05:00
Scott Lahteine
5b11b33854
Add support for Průša MK2 Multiplexer
2017-06-27 04:55:30 -05:00
Scott Lahteine
a4a587a897
Fix spelling of Průša
2017-06-27 04:46:46 -05:00
Scott Lahteine
ba1706a265
Fix spacing in gcode.cpp
...
Followup to #6940
2017-06-27 04:46:46 -05:00
Scott Lahteine
c2c8aafda2
Merge pull request #7157 from thinkyhead/bf_g33_f_parameter
...
G33 F and Height bug fix
2017-06-27 04:36:22 -05:00
Scott Lahteine
627afb29df
Merge pull request #7109 from tnw513/fix-italian
...
added missing italian translation
2017-06-27 04:12:30 -05:00
Scott Lahteine
f0f9fb7465
Remove line that does nothing
2017-06-27 04:08:50 -05:00
LVD-AC
99592c8458
Update G33: Add F, fix height bug
2017-06-27 04:02:02 -05:00
Ben Lye
31514f453a
Fix #ifdef AVR_AT90USB1286_FAMILY in pinsDebug
...
Can't compile with PINS_DEBUGING enabled on Atmega1284p because it tries
to enumerate pins 46 and 47 (which don't exist) because `#ifdef
AVR_AT90USB1286_FAMILY ` doesn't work as expected.
2017-06-27 08:04:40 +01:00
Scott Lahteine
134116b874
Merge pull request #7153 from thinkyhead/bf_czech_update
...
Updated Czech language
2017-06-26 17:34:15 -05:00
Petr Zahradník
e80958b631
CZ Translate BLTouch and UBL
...
Fixup length
2017-06-26 16:15:31 -05:00
Scott Lahteine
fe7e890b09
Fix issues with ADC_KEYPAD
...
Fixes #7150
2017-06-26 16:08:31 -05:00
dot-bob
a1632cfa0a
Added option 'H' to G29 P4.
...
- Added `H` to set a nozzle height adjustment to surface of the bed.
- Updated G29 P4 comments to reflect changes.
2017-06-25 17:14:08 -05:00
Scott Lahteine
e687782875
Merge pull request #7134 from thinkyhead/bf_skynet_a3_ready
...
Add Skynet/ANET A10 support
2017-06-25 14:35:22 -05:00
dot-bob
b3c36c98fd
Edit digipot currents via LCD, save to EEPROM
2017-06-25 01:02:36 -05:00
Scott Lahteine
3c7bfe798d
Various cleanups ahead of digipot save
2017-06-24 23:56:24 -05:00
Bob-the-Kuhn
9651d01e1a
Add Skynet/ANET A10 support
2017-06-24 19:07:03 -05:00
Scott Lahteine
eb314373bb
Config spacing & consistency, group custom LCDs
2017-06-24 14:33:40 -05:00
Scott Lahteine
6c45fa7dcc
Apply #elif in LCD conditionals
2017-06-24 13:56:33 -05:00
Scott Lahteine
afbc6e3e2f
Update DELTA/SCARA config comments
2017-06-24 12:47:17 -05:00
Paweł Stawicki
1e47c17b46
Fix: set digipot mcp4018 Vrefmax to 1.666V
2017-06-24 12:35:34 -05:00
Scott Lahteine
80a232419d
CNC workspace planes and 'P' argument for G2/G3
2017-06-23 14:53:03 -05:00
Scott Lahteine
5fb0d401eb
Formatting tweaks
2017-06-23 14:53:02 -05:00
Scott Lahteine
ed04d0b6be
Label DualXMode enums
2017-06-23 14:53:02 -05:00
Scott Lahteine
786cdea124
Ensure REPRAPWORLD_KEYPAD_MOVE_STEP is defined
2017-06-23 14:53:01 -05:00
Scott Lahteine
ee7163fd3a
Fix pinsDebug compile errors
2017-06-23 14:53:01 -05:00
Scott Lahteine
a9f8e518bf
Fix FILAMENT_WIDTH_SENSOR infinite loop issue
...
Addressing #6992 and #5851
2017-06-23 14:53:01 -05:00
Scott Lahteine
254a11b083
Merge pull request #7120 from thinkyhead/bf_sainsmart_link
...
Add link to F. Malpartida LiquidCrystal library
2017-06-22 14:04:23 -05:00
Scott Lahteine
aeb6d465a4
Merge pull request #7118 from thinkyhead/bf_french_update
...
French update
2017-06-22 13:10:07 -05:00
Bob-the-Kuhn
325f09ea6c
Add link to custom LiquidCrystal library by F. Malpartida
2017-06-22 13:07:08 -05:00
MagoKimbra
d26c8cc5c8
fix_planner_refresh_e_positioning ( #7103 )
...
* fix_planner_refresh_e_positioning
* Fix
2017-06-22 12:59:22 -05:00
Gege2B
c7f04fbcc7
French translation
2017-06-22 12:49:23 -05:00
Silvio Didonna
4171520729
added missing italian translation
2017-06-21 11:08:39 +02:00
Bob-the-Kuhn
41bfff14e2
Merge pull request #6991 from Bob-the-Kuhn/Mesh-with-babystepping
...
Mesh with BABYSTEP_ZPROBE_OFFSET: add sanity check
2017-06-20 16:36:22 -05:00
Scott Lahteine
424d0bae8b
Merge pull request #7100 from thinkyhead/bf_HAL_prepare
...
Apply maths macros and type changes ahead of HAL
2017-06-20 01:15:23 -05:00
Scott Lahteine
5c59ee4e93
Use current (raw) Z if omitted from G29 WXY or G29 WIJ.
2017-06-20 00:10:52 -05:00
Scott Lahteine
37bc0fce62
Make G29 compatible with M206 Z and G92 Z
...
Use the raw position for mesh measurement. Otherwise the `M206` and
`M92` Z offsets will get canceled out by bed leveling. The downside is
`G29` will not compensate for a poorly set small `M206` fudge value.
To elaborate on this issue, imagine you are probing with a Z home
offset of -0.1, meaning when Z homes, -0.1 is the current position,
implying the ideal bed zero for the nozzle is 0.1mm higher than the Z
endstop. Ordinarily when printing, Z would raise 0.1mm higher.
What happens when we probe is that all points are measured with that
-0.1 included. So when bed leveling is enabled the `M206 Z` offset gets
exactly canceled out by the bed readings.
2017-06-20 00:09:59 -05:00
Scott Lahteine
6c45d0fd81
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
Scott Lahteine
8a51e2960c
Improve the experience of editing steps_per_mm
2017-06-19 22:17:15 -05:00
Scott Lahteine
725d9d9a56
Fix and improve LCD value editing display
...
- Fix: When "100.0" changes to "99.0" the LCD shows "199.0"
- Use 2 rows if needed on character LCD, (allowing longer labels…
Germany, et. al.)
- Known issue: A certain length label combined with a certain value
drawing function could, for example, display 99.0 on 1 line, but 100.0
on two lines. Workaround would be to pass a nominal value size argument.
2017-06-19 22:17:15 -05:00
Scott Lahteine
499bb85a95
Clean up, put ubl menu itemization closer at hand
2017-06-19 22:17:14 -05:00
Tannoo
90f5f82926
Step-by-Step Menu addition
2017-06-19 20:15:11 -05:00
Scott Lahteine
0c616700f3
Merge pull request #7097 from thinkyhead/bf_dac_percents_fix
...
Convert DAC percent to uint8_t
2017-06-19 17:58:55 -05:00
Florian Heilmann
6dcf42f1a7
Add Z Fade Height to M420 output if it is enabled ( #7042 )
...
* Add Z Fade Height to M420 Output
Echo the z-fade height when M420 is called, if it is enabled.
* Fix Whitespace
* Fix Compiler complaint
* Missing semi-colon
2017-06-19 17:53:07 -05:00
Bob-the-Kuhn
a1c65fd3d5
convert DAC percent to uint8_t
...
=====================
add test to Travis
2017-06-19 17:46:41 -05:00
Scott Lahteine
907cafcbfd
Support for two switching extruders
2017-06-19 17:20:59 -05:00
Ross Allan
cfcd069501
Fix #5699 - LIN_ADVANCE freeze when ADV_RATE returns 0
2017-06-19 14:02:17 -05:00
Scott Lahteine
b8b7ef1902
Merge pull request #7090 from thinkyhead/bf_italian_refix
...
Fix Italian language mapper
2017-06-19 09:27:13 -05:00
Scott Lahteine
42f7f9e013
Merge pull request #7060 from bgort/i2cpefix
...
I2C Position Encoders Example Configs
2017-06-19 01:08:42 -05:00
Scott Lahteine
0b49bddec2
Fix Italian language mapper
2017-06-19 01:01:40 -05:00
Silvio Didonna
2e26a7c752
Added missing Italian translations
2017-06-18 23:37:48 -05:00
Scott Lahteine
4c3dc8bf07
Remove set_current_to_destination from resume_print
...
Addressing #7057
2017-06-18 23:01:13 -05:00
Scott Lahteine
4857a3ba48
Formatting and spelling
2017-06-18 23:01:12 -05:00
Thomas Moore
3d24c329af
M600 fixes
2017-06-18 23:00:56 -05:00
Bob-the-Kuhn
8fb30aaed6
warn user of an invalid combination
2017-06-17 15:04:47 -05:00
Bob-the-Kuhn
6cb9bb27fe
Move lcd_refresh_zprobe_zoffset definition
2017-06-16 21:46:33 -05:00
Scott Lahteine
d4270f15a9
Spacing tweak in setup()
2017-06-16 14:21:05 -05:00
Scott Lahteine
c61c0a9aeb
Fix status message missing "blink"
2017-06-16 14:18:19 -05:00
Scott Lahteine
062131554f
Followup to #7045
2017-06-16 14:18:19 -05:00
Jim Brown
3d043976f7
Add option to disallow filament change without homing first
2017-06-16 13:32:17 -05:00
Scott Lahteine
93da4e83f7
One more space on a short status message
2017-06-16 12:58:25 -05:00
Scott Lahteine
7c95f762f2
Show LCD bed options even without thermal protection
2017-06-15 15:29:56 -05:00
Scott Lahteine
92eb55f246
Reject generous donation of trailing whitespace
2017-06-15 15:25:24 -05:00
Scott Lahteine
428be27893
Formatting adjustments
2017-06-15 15:25:24 -05:00
Scott Lahteine
8d5a37fb3d
Support for a 5th stepper in stepper code
2017-06-15 15:25:23 -05:00
Scott Lahteine
7769a22064
Tweaks to temperature code
2017-06-15 15:25:23 -05:00
Scott Lahteine
d9da126776
Cleanups for UBL / ultralcd.cpp
2017-06-15 15:22:36 -05:00
Scott Lahteine
499d5c3b24
Fix scrolling lcd message for DOGM
2017-06-15 15:07:39 -05:00
Scott Lahteine
7164fd499e
Tweak to G33 P error
2017-06-15 14:43:40 -05:00
Scott Lahteine
c10d763d98
Simpler prepare move conditions
2017-06-15 14:43:40 -05:00
Scott Lahteine
4ebff8eaa5
Drop fastio timer cruft
2017-06-15 14:43:40 -05:00
Scott Lahteine
09bc34f4dc
Allow arbitrarily long retraction
2017-06-15 14:43:30 -05:00
Scott Lahteine
4414825e0d
Merge pull request #7038 from thinkyhead/bf_PCA9632
...
PCA9632 PWM color LED support
2017-06-15 14:41:24 -05:00
Bob-the-Kuhn
9dda022705
fix compile errors
...
================================
Changed to conditional compile for AT90USB issue
2017-06-15 13:18:14 -05:00
Bob-the-Kuhn
b3338ccb01
Merge pull request #6954 from Bob-the-Kuhn/Software-SPI-for-all-CPUs
...
SD card soft SPI - allow all CPU families to use it
2017-06-15 01:03:39 -05:00
Brian
40bb0cbf7a
example configurations, etc.
2017-06-14 18:04:28 -04:00
Jim Brown
26d20ebcfc
Don't allow filament change without homing first ( #7054 )
2017-06-13 17:11:37 -05:00
Roxy-3D
824f71d503
LCD Panel Interactive Mesh Editing ( #7045 )
...
Original Mesh Bed Leveling replacement put at top of UBL Menu Options to
help facilitate the removal of the Original Mesh Bed Leveling.
Radar display (and control) of the UBL Interactive Mesh Editing.
2017-06-12 18:26:49 -05:00
Scott Lahteine
445227c807
Fix missing LCD_STR_REFRESH
2017-06-12 01:28:52 -05:00
Scott Lahteine
699aa35df6
Code cleanup for G33
2017-06-12 01:25:40 -05:00
dot-bob
0bc66bf22c
PCA9632 PWM color LED support
...
Add support for the PCA9632 PWM color LED driver used on the Ultimaker 2 and Wanhao Duplicator 6.
2017-06-12 01:09:24 -05:00
Luc Van Daele
896dfa0577
G33 eccentric probe fixes ( #6850 )
...
* excentric probe config fix
* undo last commit
* eccentric probe fix
* oops
* !stow after each probe
* deploy/stow fix
* E parameter + bit of cleanup
* comment
* LCD menu fix
2017-06-12 01:07:19 -05:00
Thomas Moore
e47029199e
Remove ADVANCED_PAUSE_FEATURE requirement for PROBING_HEATERS_OFF ( #7000 )
...
* Remove ADVANCED_PAUSE_FEATURE requirement for PROBING_HEATERS_OFF
* Add HEATER_IDLE_HANDLER conditional
2017-06-12 00:22:31 -05:00
Scott Lahteine
8326c1c279
Merge pull request #7005 from Diederikvanderpant/bugfix-1.1.x
...
added shift register pins for reprapworld keypad v1.1
2017-06-11 23:12:11 -05:00
Scott Lahteine
07f8da36d2
CL-260 configs
2017-06-11 19:40:13 -05:00
Scott Lahteine
dce665a083
Merge pull request #7025 from magnuspub/patch-1
...
Mod in language_it.h
2017-06-11 19:09:46 -05:00
Scott Lahteine
7b09ab6bda
Merge pull request #7033 from Bob-the-Kuhn/pinsDebug-&-dac_mcp4728-fixes
...
Fix pinsDebug problem & add capability to display more than 70 pins
2017-06-11 19:09:09 -05:00
Scott Lahteine
5bdb4bbc5e
Merge pull request #7030 from thinkyhead/bf_circular_scroll
...
Circular scrolling of the status message
2017-06-11 19:07:38 -05:00
Federico
772275ab0c
Create language_it.h
2017-06-11 10:37:34 +02:00
Bob-the-Kuhn
11e28f389e
fix pinsDebug.h error, add capability to display more than 70 pins.
2017-06-10 22:01:15 -05:00
Scott Lahteine
21217d53df
Circular scrolling of the status message
2017-06-10 20:56:00 -05:00
Scott Lahteine
da8e946efb
Reduce size of heater state print code
2017-06-10 20:26:17 -05:00
Scott Lahteine
dde8bb7c8b
Fix extrude_min_temp compiler warning
2017-06-10 20:07:36 -05:00
Scott Lahteine
83263076dc
Merge pull request #7014 from fiveangle/fix_get-set_DrvPct_declarations
...
fix get/setDrvPct declarations
2017-06-10 19:06:50 -05:00
Scott Lahteine
57a51fd5db
Tweak some else clauses
2017-06-10 16:40:10 -05:00
Scott Lahteine
fc89de6d8b
Followup to German language update
2017-06-10 16:27:39 -05:00
Federico
92011e3d8c
Create language_it.h
2017-06-10 21:50:14 +02:00
Dave Johnson
7864b133a8
Fix get/setDrvPct declarations
2017-06-09 20:21:28 -07:00
Scott Lahteine
0b6b7c9c7e
Merge pull request #7013 from thinkyhead/bf_german_update
...
Update language_de.h
2017-06-09 21:41:19 -05:00
Scott Lahteine
f17a3c2474
Merge pull request #6889 from thinkyhead/bf_at90usb_mapping
...
Unify all AVR90USB pin mappings
2017-06-09 21:00:13 -05:00
Kai
5a72b6818e
update language_de.h
...
Following #6990 some more translations and some grammar fixes
2017-06-09 19:45:09 -05:00
Scott Lahteine
4cc5444144
Merge pull request #7008 from Bob-the-Kuhn/Z_MIN_PROBE_ENDSTOP-and-Z_MAX_PIN
...
Can't use "#define Z_MIN_PROBE_PIN Z_MAX_PIN" in configuration.h
2017-06-09 19:42:56 -05:00
Scott Lahteine
51bc50214a
Save 8 bytes of SRAM
2017-06-09 19:20:16 -05:00
Scott Lahteine
748bf32388
Unify AVR90USB: pinsDebug changes
2017-06-09 19:20:16 -05:00
Scott Lahteine
5426fc1735
Unify AVR90USB: Pins cleanup
2017-06-09 18:48:12 -05:00
Scott Lahteine
87d8223251
Unify AVR90USB: Pins remap to Arduino
2017-06-09 18:48:12 -05:00
Scott Lahteine
b378deaf89
Unify AVR90USB: fastio changes
2017-06-09 18:21:57 -05:00
Scott Lahteine
e94f79ccea
Patch some serial macros
2017-06-09 17:17:23 -05:00
Scott Lahteine
d91710e9aa
Followup for UBL translated strings
2017-06-09 16:59:26 -05:00
Scott Lahteine
761df686bd
Minor cleanup in gcode.h
2017-06-09 16:59:26 -05:00
Thomas Moore
897bc2ac1f
Updates for ensure_safe_temperature ( #6963 )
...
* Updates for ensure_safe_temperature
* M600 fixes
2017-06-09 15:19:08 -05:00
Bob-the-Kuhn
1c107b3949
delete problem line
2017-06-09 11:53:36 -05:00
Diederik van der Pant
5b270417ed
added shift register pins for reprapworld keypad v1.1
...
I recently upgraded my Marlin to V1.1.x and decided to publish my fix to make marlin compile properly when #define board megatronics 2 in combination with #define reprapworld keypad v1.1. It was previously described in the comments of a closed pull request. MarlinFirmware#472. All the buttons on the keypad are now operational.
2017-06-09 14:17:47 +02:00
bgort
2f55870edb
[New Feature] I2C position encoder support ( #6946 )
...
* [New Feature] I2C position encoder support
I plan to continue improving/cleaning this up, as there areas that need work.
* let the cleanups begin.
* progress
* more progress
* comments, rename files, etc.
* clean
* Cleanups per thinkyhead
* a few more cleanups
* cleanups, bugfixes, etc.
* remove unnecessary passes_test(), additional cleanups/optimizations
* cleanups
* misc.
* Fix up I2CPEM.init() and a few other things.
* organize, fix, rename, etc.
* more optimization
* a few more tweaks
2017-06-09 08:06:23 -04:00
Bob-the-Kuhn
28d72f48f1
change to DWORD
2017-06-08 16:15:02 -05:00
Bob-the-Kuhn
8d1d9040b6
add static
2017-06-08 14:59:21 -05:00
Bob-the-Kuhn
a17ffe1ece
Merge pull request #6985 from Kaibob2/patch-1
...
Fix for #6980 (case_light compile problem when EXTENDED_CAPABILITIES_REPORT is enabled)
2017-06-08 11:18:56 -05:00
Tannoo
731c8e6372
Translatable Strings for ubl_G29 ( #6990 )
2017-06-08 10:09:39 -05:00
Kai
abb6b8ad54
update language_de.h ( #6986 )
...
There was quite a lot to translate this time. I'm not absolutely confident with the whole UBL stuff and it's a PITA to translate. I don't use any kind of levelling myself as i just have a perfectly level cast aluminium plate as bed.
So maybe someone who really uses it might take a closer look at it after it's merged.
2017-06-08 10:04:52 -05:00
Kai
c2eff60d3f
Fix for #6980
...
Line 7830 prevented successfull compilation when #define CASE_LIGHT_ENABLE is uncommented
2017-06-08 09:19:04 +02:00
Scott Lahteine
1419126721
Merge pull request #6965 from thinkyhead/bf_save_more_sram
...
Use createChar_P to save SRAM in bootscreen
2017-06-07 17:34:19 -05:00
Scott Lahteine
a453be7357
Merge pull request #6973 from bgort/autoreportT
...
Enable AUTO_REPORT_TEMPERATURES by default
2017-06-07 17:33:40 -05:00
Scott Lahteine
1d615e0a67
Merge pull request #6976 from Tannoo/Leveling_in_About_Printer
...
Leveling type in About Printer
2017-06-07 17:26:21 -05:00
Scott Lahteine
707707d71a
Fix LCD status message padding
2017-06-07 16:07:38 -05:00
Scott Lahteine
e556ab1dff
Find three-point leveling points on Delta
2017-06-07 16:07:38 -05:00
Scott Lahteine
a27b08e6af
Various code style tweaks
2017-06-07 16:07:38 -05:00
Scott Lahteine
dac29e0f75
Cleaner failure of UBL without EEPROM
2017-06-07 16:07:38 -05:00
Scott Lahteine
9128d9ab45
Improve sanity checks with static_assert, organize
2017-06-07 16:07:38 -05:00
Scott Lahteine
6bb05c4543
Save 20b in smart_fill_mesh with PROGMEM
2017-06-07 16:07:38 -05:00
Scott Lahteine
b7dc4d9973
Save 92b PROGMEM, 14b SRAM with extruder auto fan
2017-06-07 16:07:38 -05:00
Scott Lahteine
c9e3caf928
Save lots of PROGMEM, ~20b SRAM with DIGIPOT_I2C
2017-06-07 16:07:38 -05:00
Scott Lahteine
4134a6b526
Save 88b PROGMEM, 48 bytes SRAM in settings.reset
2017-06-07 16:07:38 -05:00
Scott Lahteine
36cc03a9b4
Save 224b PROGMEM, 48b SRAM in get_homing_bump_feedrate
2017-06-07 16:07:38 -05:00
Scott Lahteine
2a41f0ff84
Save 28b PROGMEM in ultralcd.cpp (line_to_current)
2017-06-07 16:07:38 -05:00
Scott Lahteine
e6d10f6ddd
Spend 48b PROGMEM to save 16b SRAM
...
...by moving `homing_feedrate_mm_s` to PROGMEM.
2017-06-07 16:07:38 -05:00
Scott Lahteine
97e13a30ba
Save over 100 bytes SRAM in pin_is_protected
2017-06-07 16:07:38 -05:00
Scott Lahteine
45c74406cf
Recover 32 bytes of SRAM in Marlin bootscreen code
2017-06-07 16:07:38 -05:00
Scott Lahteine
e1c5a43247
Cleanup stepper current control config options
2017-06-07 16:07:38 -05:00
Scott Lahteine
efc198f952
Spacing, const, comments
2017-06-07 16:07:38 -05:00
Scott Lahteine
4406fba994
Fixes #6975
2017-06-07 11:14:30 -05:00
Scott Lahteine
d28f5d8a78
Fix: z_endstop_adj is never initialized
2017-06-07 10:29:56 -05:00
Scott Lahteine
5d5ff36446
Fix a compile error with _lcd_set_z_fade_height
2017-06-07 10:29:56 -05:00
Tannoo
b88957e0d4
Leveling type in About Printer
...
Show the Leveling system in use on the About Printer screen.
2017-06-07 06:28:33 -06:00
Brian
dd071a4a65
Enable AUTO_REPORT_TEMPERATURES by default
2017-06-07 02:52:35 -04:00
bgort
8db1197c9b
Enable extended capabilities report by default ( #6969 )
...
Ref #5139
2017-06-07 02:36:34 -04:00
bgort
82e662fc69
Remove requirement for LCD when UBL is used. ( #6971 )
...
* Remove requirement for LCD when UBL is used.
* fix previous oversights
* further refinement - error messages for P2 & P4
* require R on G26 when not using LCD; default to all points
2017-06-07 02:24:36 -04:00
Tannoo
2c2b991b59
UBL Manual Build Menu Option ( #6972 )
...
One click option to manually build UBL mesh.
2017-06-06 22:14:18 -05:00
Roxy-3D
0dd0033b33
Save up to 94 bytes of RAM on 20x4 LCD Display machines ( #6964 )
...
* Save up to 94 bytes of RAM on 20x4 LCD Display machines
Moved the custom screen characters out of RAM into Program Memory. With
SD-Card support and the Progress Bar enabled, this saves 94 bytes of RAM
memory.
This was tested using the example_configurations/FolgerTech-i3-2020
files. So a couple small changes to those files snuck into this Pull
Request.
Probably... We can find similar savings in the Graphics LCD code it we
comb through it. And if so... That is the place we really need to
save RAM memory!
* Tidy up white space and indentation
2017-06-05 17:02:00 -05:00
Bob-the-Kuhn
ba0bd33c38
Removed check for 2560 family
2017-06-04 22:16:27 -05:00
Scott Lahteine
04b07a6ecc
Unused var in Stepper
2017-06-04 17:25:16 -05:00
Scott Lahteine
eb8af486d2
Ensure safe temperature for M600
2017-06-04 17:25:16 -05:00
Scott Lahteine
bfe7fbe5c0
Maintain message scroll rate
2017-06-04 17:25:15 -05:00
Scott Lahteine
6411d65c48
Fix Morgan SCARA S2 calculation
2017-06-04 12:24:09 -05:00
Scott Lahteine
46752588b9
Merge pull request #6948 from Bob-the-Kuhn/redundant_temperature
...
fix redefinition errors for redundant_temperature
2017-06-04 12:16:09 -05:00
Scott Lahteine
5938dae200
Merge pull request #6950 from MagoKimbra/fix_g29_3_point
...
Fix G29 with 3 point
2017-06-04 12:15:44 -05:00
Scott Lahteine
c5e0f08e35
Merge pull request #6951 from fixoid/patch-4
...
Initializing extruder/nozzle servo when turning on the printer
2017-06-04 12:13:05 -05:00
Scott Lahteine
e4937b0285
Cleanup of spacing and formatting
2017-06-04 11:31:43 -05:00
fixoid
1aab9906e6
Initializing extruder/nozzle servo when when turning on the printer
2017-06-04 16:57:24 +03:00
MagoKimbra
663ff7f92a
Fix G29 with 3 point
2017-06-04 14:39:31 +02:00
oldmcg
9f295581f0
Ubl delta fixes and improvements ( #6941 )
...
* Change all direct changes of ubl.state.active to
set_bed_leveling_enabled() which handles apply/unapply
leveling to maintain current_position consistency.
Fix invalidation of UBL mesh to invalid unreachable
mesh points as well (delta corners).
Fix UBL_DELTA unapply_leveling logic and when
it gets applied, including fade_height changes.
Add optional M114 D for detailed position information,
disabled from compilation by default (M114_DETAIL).
* UBL_DELTA raw and inline kinematics
* UBL planner fall through fix
* consistent variable names
* Cleanup orphaned code and whitespace changes.
Use _O2.
* compile warnings cleanup
* Remove redundant #ifdef condition
2017-06-03 17:11:43 -05:00
Bob-the-Kuhn
c34d7a29a6
fix redefinition errors for redundant_temperature
...
Removing redundant_temperature from public section and leaving it in the
private section
2017-06-03 16:40:14 -05:00
Bob-the-Kuhn
6a5d3b580d
fix "hex_address not defined" when UBL is enabled
2017-06-03 13:19:55 -05:00
Scott Lahteine
789b2928a8
Tweak scrolling message code
2017-06-02 23:45:53 -05:00
Scott Lahteine
fc7d7f87b4
Init probe test pin with FastIO
2017-06-02 23:45:52 -05:00
Scott Lahteine
0282452cea
Make Parser::seen volatile
2017-06-02 23:45:52 -05:00
Scott Lahteine
9a305a467b
Patch LCD Contrast menu item
2017-06-02 23:45:52 -05:00
Scott Lahteine
90ccac4bcf
Clean up after recent commits
2017-06-02 23:45:52 -05:00
Bob-the-Kuhn
2130f10de8
allow space between parameter and value
2017-06-02 19:57:22 -05:00
Bob-the-Kuhn
ebda4663c3
for discusion
2017-06-02 19:42:43 -05:00
FATALHERMIT
911079104e
Support for ZRIB v2.0 Control Board
2017-06-02 12:05:46 -05:00
Scott Lahteine
65a0212866
Easier override of FILWIDTH_PIN
2017-06-02 12:05:46 -05:00
Scott Lahteine
147d9d76fc
Merge pull request #6928 from Bob-the-Kuhn/Fix-case-light-logic-on-Azteeg-X3-boards
...
Fix case light logic on Azteeg_X3 boards.
2017-06-01 20:14:15 -05:00
guntherv73
4288c4fb4f
Configurations for Malyan M150
2017-06-01 19:26:29 -05:00
Scott Lahteine
1919cb0d1e
Config cleanups
2017-06-01 19:26:16 -05:00
Bob-the-Kuhn
9a9bbfc57c
Fix case light logic on Azteeg_X3 boards.
2017-06-01 12:33:24 -05:00
Thomas Moore
a32f7b329c
Fix heater status display for advanced pause
2017-06-01 12:29:47 -05:00
Scott Lahteine
445865ea03
REPRAPWORLD_KEYPAD is NEWPANEL but not ULTIPANEL
2017-05-31 23:48:03 -05:00
Scott Lahteine
4296a8b74e
For status scrolling, pad a short message
2017-05-31 23:48:03 -05:00
Scott Lahteine
4a96433b7e
Simplify counting of printable characters
2017-05-31 23:45:41 -05:00
Scott Lahteine
8d69394ae1
Fix LCD printing of progmem strings
2017-05-31 23:36:57 -05:00
Scott Lahteine
c74d4dede6
Prevent illegal leveling combinations
...
Addressing issue #6901
2017-05-31 23:36:57 -05:00
Scott Lahteine
155aa62fb0
Merge pull request #6912 from thinkyhead/bf_better_pulse_delay
...
Account for dual XYZ in pulse delay cycles estimate
2017-05-31 22:21:47 -05:00
Scott Lahteine
a5fa586642
Preferred patch to gcode.h
2017-05-31 21:18:16 -05:00
Bob-the-Kuhn
1b41e1f645
another compile error
...
only seen if
#if ENABLED(TEMPERATURE_UNITS_SUPPORT)
...
#if
ENABLED(ULTIPANEL) && DISABLED(DISABLE_M503)
2017-05-31 13:59:49 -05:00
Bob-the-Kuhn
65bd4c8c94
Merge pull request #6797 from Bob-the-Kuhn/M355-case-lightimprovements-(1.1.x)
...
M355 case light improvements (replaces PR #5685 )
2017-05-31 13:33:59 -05:00
Bob-the-Kuhn
9657e7d3ee
copied file changes from PR #5685
...
==============================
Configuration_adv.h changes
==============================
add "live" LCD update
==============================
P & S version
==============================
final (hopefully) tested version
==============================
update M115 capabilities print
==============================
Menu changes portion of the requested changes
==============================
changed USEABLE_HARDWARE_PWM from a function to a series of macros
==============================
changes per review
2017-05-31 13:22:38 -05:00
Bob-the-Kuhn
8206bb9bb9
fix compile error
...
invalid conversion from 'const char*' to 'char*' [-fpermissive]
2017-05-31 13:17:01 -05:00
Scott Lahteine
df91346188
Account for dual XYZ in pulse delay cycles estimate
2017-05-31 12:23:28 -05:00
Scott Lahteine
7236109f2a
Patch M24 / M125 for delta
2017-05-30 23:07:29 -05:00
Scott Lahteine
be17033762
Fix case light menu toggle
2017-05-30 14:03:45 -05:00
Scott Lahteine
89b93058e3
Merge pull request #6887 from christianh17/PR-sanitycheck
...
enable DEACTIVATE_SERVOS_AFTER_MOVE with switching nozzle
2017-05-30 13:43:39 -05:00
Scott Lahteine
05b66234ae
Merge pull request #6895 from thinkyhead/bf_user_commands
...
Custom user commands menu
2017-05-30 13:40:50 -05:00
Scott Lahteine
84a0a77c59
Merge pull request #6852 from tcm0116/mixing_extruder_lin_advance
...
Generate error if MIXING_EXTRUDER and LIN_ADVANCE are both enabled
2017-05-30 13:37:51 -05:00
Scott Lahteine
266ae8912a
Formatting in _draw_heater_status
2017-05-30 03:32:16 -05:00
Scott Lahteine
6b9ca16f36
Patch lcd_print edge limit code
2017-05-30 03:32:15 -05:00
Tannoo
74d6dee920
User Command (Script) Menu
...
The menu (commands / scripts) is configurable in `Configuration_adv.h`.
- Added conditionals.
- Changed script handling.
- Slimmed and working!
- Added Status message.
- Returning to lcd status screen now!
- Example Configs Updated.
- Cleanups by @thinkyhead
2017-05-30 02:33:57 -05:00
Scott Lahteine
d9c8072037
Edit PROPORTIONAL_FONT_RATIO comment
2017-05-30 01:29:39 -05:00
Scott Lahteine
46b32e4548
Cleanup LCD interface, add lcd_reset_status
2017-05-29 22:16:13 -05:00
Scott Lahteine
ca99d67ede
Fix UBL "Info screen" menu items
2017-05-29 19:55:26 -05:00
Scott Lahteine
2c7a39bc0e
Fix LCD print aborted message
2017-05-29 19:52:01 -05:00
Scott Lahteine
0f1e8c195d
Draw on LCD after value has changed
2017-05-29 19:42:30 -05:00
Scott Lahteine
51587c4b43
Rename Feedrate to Velocity to match prior naming
2017-05-29 17:54:15 -05:00
Scott Lahteine
9677f3f2f5
Patch up LCD Bed Leveling menu
2017-05-29 17:51:11 -05:00
Scott Lahteine
fc2eaab7f3
Show home option in level bed menu
2017-05-29 17:51:10 -05:00
Scott Lahteine
c6a7adc293
Patch G29 A and Q arguments to bypass setup
2017-05-29 17:51:10 -05:00
Scott Lahteine
4cece2d72e
Use NAN for G29 W omitted parameters
2017-05-29 17:51:10 -05:00
Scott Lahteine
2d71569138
Fix spacing in JSON output
2017-05-29 17:51:10 -05:00
Scott Lahteine
b2d3c8aedd
Have G28 do a refresh of the display
2017-05-29 17:51:10 -05:00
Scott Lahteine
50ab9c2e04
General cleanup of spacing, comments
2017-05-29 15:34:14 -05:00
Scott Lahteine
f1e33afda4
Return to Bed Leveling menu when done
2017-05-29 15:31:02 -05:00
Scott Lahteine
78d8c598e1
Fix lcd_synchronize with message
2017-05-29 15:31:02 -05:00
Scott Lahteine
eb39d6e3e2
Don't draw progress bar until it has 1%
2017-05-29 15:31:01 -05:00
Scott Lahteine
194f8b2f55
Start at Z=0 in manual probing
2017-05-29 15:31:01 -05:00
Scott Lahteine
6f89db11f0
Allow lcd_setstatusPGM to reset the alert level
2017-05-29 15:31:00 -05:00
Scott Lahteine
3fe333143c
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
Scott Lahteine
d013bddfa8
Merge pull request #6876 from thinkyhead/bf_extend_leveling_menu
...
Extend the ABL/MBL Bed Leveling menu
2017-05-28 14:19:02 -05:00
Scott Lahteine
01e7e234c6
Add more options to the Bed Leveling menu
2017-05-28 14:04:28 -05:00
Scott Lahteine
0cbe448edf
Split up Control > Motion submenu
2017-05-28 12:52:24 -05:00
Scott Lahteine
a3645ec921
Reference op with variable name
2017-05-28 11:33:22 -05:00
Scott Lahteine
71367fd518
Scrolling status message option
2017-05-28 11:26:28 -05:00
Scott Lahteine
b0eae68f57
Prevent bed temperature being set too high
2017-05-28 11:11:17 -05:00
Scott Lahteine
493f0b0c62
Fix some compiler warnings
2017-05-28 11:06:33 -05:00
christianh17
f379a326cc
enable DEACTIVATE_SERVOS_AFTER_MOVE with switching nozzle
...
When using switching nozzle it should be possible to disable the servo after move. Do it only if you do not need the servo power to keep the position.
2017-05-28 15:33:28 +02:00
Scott Lahteine
33279a1e02
Code style tweak to gcode.h
2017-05-27 19:47:26 -05:00
Ernesto Martinez
ac959b12ee
Updates to language_es.h based on latest updates. ( #6871 )
...
Spanish language updates
2017-05-27 19:08:39 -05:00
Scott Lahteine
55c700d537
Tweak to gcode.h
2017-05-26 22:11:31 -05:00
Bob-the-Kuhn
868e7db4ae
value check was looking at the code
2017-05-26 14:49:42 -05:00
Thomas Moore
fb5e0ffe16
Unify M600 and M125 pause features ( #6407 )
...
* Unify M600 and M125 pause features
* Cleanup per thinkyhead's comments
* Rename filament_change_menu_response to advanced_pause_menu_response
* Include HAS_BED_PROBE in QUIET_PROBING
* Update gMax example file
* is_idle() is out of scope without the braces
* Convert FT-i3-2020 to Advance Pause names...
* Allow pause even if not printing
2017-05-26 13:01:02 -05:00
Scott Lahteine
b3a97b5013
Patch up LCD level bed menus
2017-05-25 23:53:31 -05:00
Scott Lahteine
78af2b1444
Fix PROBE_MANUALLY via G-code
2017-05-25 23:53:31 -05:00
Scott Lahteine
082da23391
One fewer EOL in M503 output
2017-05-25 23:53:31 -05:00
Scott Lahteine
b15e531464
Fix screen change on character display
2017-05-25 15:29:14 -05:00
Thomas Moore
44e657766e
Add incompatibility error to Sanity Check for MIXING_EXTRUDER and LIN_ADVANCE
2017-05-25 08:06:27 -05:00
Scott Lahteine
735405b2a4
Merge pull request #6848 from thinkyhead/bf_scara_M665
...
Add M665 for SCARA
2017-05-24 20:51:51 -05:00
Scott Lahteine
ffa901f373
Merge pull request #6839 from thinkyhead/bf_day_ending_in_y
...
UBL ultralcd.cpp patches
2017-05-24 17:55:44 -05:00
Scott Lahteine
361cbba113
Use M665 to set SCARA angle offsets
2017-05-24 17:49:24 -05:00
Scott Lahteine
5ed63a5724
Apply const in prepare_kinematic_move_to
2017-05-24 17:49:24 -05:00
Scott Lahteine
5cbe0244c5
Fixes for spindle/laser and SCARA probe bounds
2017-05-24 17:49:23 -05:00
Scott Lahteine
1f52c9f5df
Neater Megatronics 3 pins
2017-05-24 17:49:23 -05:00
Scott Lahteine
af81cb4cbb
Patch for M503 output
2017-05-24 17:49:09 -05:00
Scott Lahteine
1d167a6874
Some cleanup, fixes for ultralcd.cpp UBL code
...
- Free up 30 bytes of SRAM in UBL LCD code
- Fix BUILD_ABS_MESH temperature
- Fix UBL indentation in ultralcd.cpp
- UBL vars lowercase, "convert to positive" sensibly
2017-05-24 01:10:42 -05:00
Scott Lahteine
f4028fe088
New GCode Parser - Implementation
2017-05-23 14:15:10 -05:00
Scott Lahteine
002a06c507
New GCode Parser - Configuration
2017-05-23 14:15:07 -05:00
Scott Lahteine
ad915b667e
One more mesh_index_to_npos update
...
Followup to #6827
2017-05-23 13:02:50 -05:00
Scott Lahteine
2881f0a48d
Fix, extend G42 with P (probe) parameter
...
- Also fix handling of SCARA and misuse of `codenum`.
2017-05-23 04:55:42 -05:00
Scott Lahteine
d252d1b6a2
Merge pull request #6831 from thinkyhead/bf_move_g7
...
Move G7 to G42
2017-05-23 03:02:57 -05:00
Brian
82ca6248e2
Move G7 to G42
...
See: #6777
2017-05-22 23:21:35 -05:00
Scott Lahteine
26ffa558a3
Use redraw flag for both types of LCD
2017-05-22 18:34:54 -05:00
Scott Lahteine
3ff7515527
Merge pull request #6817 from cbusillo/patch-1
...
missing enable for M605 for duplication mode
2017-05-22 18:07:11 -05:00
Scott Lahteine
34cfbc90cd
Use new attribute macros in more places
2017-05-22 17:38:58 -05:00
Scott Lahteine
85b967657e
Embed G26/G29 in ubl class, with enhancements
2017-05-22 17:38:58 -05:00
Scott Lahteine
c99bd69889
Apply const float & more
2017-05-22 17:38:36 -05:00
Scott Lahteine
ad5638f78c
Cleanup some fastio code
2017-05-22 17:38:36 -05:00
Scott Lahteine
e271521c39
Single user_canceled function in G26
2017-05-22 17:38:36 -05:00
Scott Lahteine
c2ea22da49
Clean up whitespace
2017-05-22 17:38:36 -05:00
Scott Lahteine
ceb62fc7e1
Fixes #6828 : M428 bug
2017-05-22 17:34:03 -05:00
oldmcg
48f7652143
UBL G29 -P3.1 smart fill ( #6823 )
...
* UBL G29 -P3.1 mesh fill with distance-weighted least squares fit.
* Back to original -O0 on G29 for now.
2017-05-22 12:33:50 -05:00
Scott Lahteine
850203fb3a
Merge pull request #6816 from thinkyhead/bf_lcd_live_editing
...
Constrain LCD status message rendering
2017-05-22 11:15:35 -05:00
Roxy-3D
3129260c44
Misc. Clean Up ( #6822 )
...
* Misc. Clean Up
Mostly UBL related clean up.
- But fixed a bug in the thermistortables.
- Made G26 more responsive to user aborts.
- Added sanity checks for older name for UBL_MESH_VALIDATION.
- Made G29 P4 able to edit invalidated mesh points
- Restore a reasonable Fade Height for UBL when creating new state information
- Get UBL's Topology Map to look a little bit better
- Make sure the user doesn't see a blank screen when doing Mesh Editing.
* Huh??? GitHub Desktop screwed up!
* get the planner object in scope
* Fix out of scope z_fade_height
* Travis timed out...
I need a change so I can force a new commit and sync.
2017-05-21 22:09:51 -05:00
cbusillo
3b4116e73b
missing enable for M605 for duplication mode
...
I believe gcode_M605 will not be called when using DUAL_NOZZLE_DUPLICATION_MODE without this change.
2017-05-21 13:54:20 -04:00
Scott Lahteine
5e8892d6b5
Show Restore Failsafe item with EEPROM off
2017-05-21 12:52:44 -05:00
Scott Lahteine
76af9ac7c5
tweaks
2017-05-21 12:51:58 -05:00
Scott Lahteine
ba5910ab6c
Constrain LCD status message rendering
2017-05-21 12:35:16 -05:00
MagoKimbra
2c309a8f7c
Fix set_lcd_contrast
2017-05-21 19:01:44 +02:00
Scott Lahteine
22dbb2117c
Merge pull request #6812 from thinkyhead/bf_day_ending_in_y
...
Cleanup code, organize & document fastio pin mappings
2017-05-21 11:39:04 -05:00
Roxy-3D
364f8fb613
Update Configuration.h files to better names ( #6814 )
...
Changed UBL_G26_MESH_EDITING to UBL_G26_MESH_VALIDATION
Added UBL_MESH_EDIT_MOVES_Z to prepare for that change (coming next)
2017-05-21 11:10:22 -05:00
Scott Lahteine
d7fda2fe49
Formatting, const in G33
2017-05-21 10:40:05 -05:00
Scott Lahteine
1519b0e7c1
Split up fastio.h, document pin mappings
2017-05-21 10:33:27 -05:00
Scott Lahteine
49599caade
General cleanup to utf_mapper.h
2017-05-21 10:33:27 -05:00
Scott Lahteine
02f15f6775
UBL-related cleanup, spacing, standards
...
Reference: #6804
2017-05-21 10:33:26 -05:00
Scott Lahteine
52e20aeab3
Pins-related cleanup, formatting
2017-05-21 07:18:03 -05:00
Scott Lahteine
ea906e4da7
Merge pull request #6810 from thinkyhead/bf_lcd_live_editing
...
Add "live editing" option to LCD menus
2017-05-21 06:11:52 -05:00
Scott Lahteine
11fc9564c9
Add live editing option to LCD menu
2017-05-21 05:29:46 -05:00
Scott Lahteine
8a0a5cfccc
Temp-related cosmetic changes
2017-05-21 04:49:25 -05:00
Scott Lahteine
b29dbbd5e4
Use uint16_t for temps
2017-05-21 04:48:53 -05:00
Scott Lahteine
ebcd1aaf88
Access hotend/bed temperatures as float
2017-05-21 04:46:31 -05:00
Scott Lahteine
6ce2b1ff4a
G33 evolutionary changes
2017-05-20 19:23:39 -05:00
Scott Lahteine
3c061a9f9a
UBL tabs, whitespace, spelling, etc.
2017-05-19 14:16:50 -05:00
Scott Lahteine
75badae2f8
Disable PROBE_MANUALLY for UBL
...
Plus some other UBL tweaks.
2017-05-19 07:13:18 -05:00
Scott Lahteine
94a4af1d7f
Merge pull request #6773 from thinkyhead/bf_lcd_patch_e5
...
Patch LCD code for 5th extruder
2017-05-18 15:26:55 -05:00
Brian
01f452c37c
Tweak Azteeg X3 PRO _pins.h so Viki2 will work for those without a case light.
...
- add comment explaining that the Panucatt Viki2 wiring diagram uses pin 44
2017-05-18 13:00:13 -04:00
Brian
e09b4ce4a5
Add checking
2017-05-17 19:46:16 -04:00
Brian
13599a73c7
Add G7 gcode command to move between UBL mesh points
...
- can be augmented in the future to enable for other leveling systems
Quite simple, but did not want to modify `G1` as the additional checking would slow it down.
Tested & working.
2017-05-17 19:05:36 -04:00
Brian
43c24f0027
Fix recent regressions, &c.
...
- fix broken `M421` due to less-than-careful optimization
- add HOME_AFTER_DEACTIVATE define to advanced config so not everyone has to rehome after steppers are deactivated
- misc. cleanups (remove unused label, unused variables)
2017-05-17 17:21:46 -04:00
Scott Lahteine
3843a5151a
Patch LCD code for 5th extruder, EEPROM reset
2017-05-17 15:33:51 -05:00
Scott Lahteine
6c064bb7d6
Some probe_pt error-handling
2017-05-17 15:33:51 -05:00
Brian
3370329751
Fix broken EEPROM save/load
2017-05-17 12:41:27 -04:00
Scott Lahteine
f0fe26c411
Ensure Arduino.h and configs are included for serial.cpp
2017-05-17 05:07:35 -05:00
Scott Lahteine
ffb5353294
Merge pull request #6738 from thinkyhead/bf_config_crc_rebase
...
Implement CRC16, develop mesh allocation table
2017-05-17 04:44:00 -05:00
Scott Lahteine
e806e6419a
Merge pull request #6768 from thinkyhead/rc_spindle_m3_m5
...
Spindle / Laser support
2017-05-17 04:39:32 -05:00
Scott Lahteine
d6f49c6626
Merge pull request #6752 from jdelahayes/bugfix-1.1.x
...
Update french language
2017-05-17 04:32:28 -05:00
Scott Lahteine
55a87da036
SPINDLE/LASER implementation
2017-05-17 04:26:15 -05:00
Scott Lahteine
ffe0e2d19a
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
Scott Lahteine
99c4900a98
SPINDLE/LASER config changes
2017-05-17 04:23:06 -05:00
Scott Lahteine
a3abfeac47
Mark strings needing translation
2017-05-17 03:49:33 -05:00
Scott Lahteine
7f4e4b1212
UBL name/state methods
2017-05-17 03:49:32 -05:00
Brian
7852369987
Implement CRC16, develop mesh allocation table
...
- Add crc16 utility function
- Implement CRC16 for config store, remove old checksum, increment layout version
- Move UBL mesh store/load to MarlinSettings; increment UBL_VERSION
- Begin to lay out MAT structure, prototype functions, etc.
- Rename ubl.state.eeprom_storage_slot to .storage_slot
- Misc. optimization
- Cleanup/standardize/improve some messages
This is a work in progress!
2017-05-17 03:49:19 -05:00
Scott Lahteine
00d358d92d
Fix a PROBE_MANUALLY bug in ultralcd.cpp
2017-05-17 03:49:19 -05:00
fixoid
c2321b1cdd
Separate SWITCHING_NOZZLE and SWITCHING_EXTRUDER
2017-05-16 19:25:17 -05:00
Scott Lahteine
238fb53617
Patch home_all_axes to ignore G28 XYZ parameters
2017-05-16 16:18:38 -05:00
Scott Lahteine
6b6630e11b
Clean up trailing whitespace and tabs
2017-05-16 16:06:18 -05:00
Roxy-3D
d30e478f97
Fix incorrectly optimized find_closest_mesh_point_of_type() function ( #6761 )
2017-05-16 15:24:24 -05:00
oldmcg
5a9e52a3e0
Use COPY_XYZE macro to copy exactly 4 elements ( #6758 )
...
Fix undefined DELTA_PROBEABLE_RADIUS for UBL_DELTA
2017-05-16 11:47:51 -05:00
Roxy-3D
8606644343
M48 Fix for Delta Configuration Files & UBL G29 only homes when necessary ( #6757 )
...
* Fix M48 for Delta's There was a scope issue: DELTA_PROBEABLE_RADIUS wasn't getting defined.
* Check if the specified G29 command requires homing
2017-05-16 11:23:50 -05:00
Tannoo
0cd398c25d
UBL Menu Updates ( #6751 )
...
Things should be pretty stable for a while.
But it wouldn't surprise me if the Delta people have a need for a few special commands.
2017-05-16 08:45:31 -05:00
Johann Delahayes
a5737cba7c
Update french language
2017-05-16 12:27:42 +02:00
Scott Lahteine
0fef9a2983
Remove "ubl." prefix from calls within ubl method
2017-05-16 01:19:45 -05:00
Scott Lahteine
14a4257c7b
UBL tabs, whitespace, spelling, etc.
2017-05-16 01:19:45 -05:00
Scott Lahteine
56e2e331ed
UBL G29: replace 'O' with 'T'
...
Since we already used 'T' for `G29` Topology Report in the past, and since 'T' is available…
2017-05-16 01:18:41 -05:00
Scott Lahteine
091f94a6bf
Fix up M421 and some comments
2017-05-16 01:14:03 -05:00
Scott Lahteine
4ec4ecff1a
Reduce find_closest_mesh_point_of_type a little
2017-05-16 01:14:03 -05:00
Scott Lahteine
f1a1c6873e
Patch lcd_implementation_status_screen compiler warning
2017-05-16 00:59:50 -05:00
moebyusDev
2266c0780d
fixed spanish lang
...
It was missing MSG_FILAMENT_CHANGE_HEAT_2 and MSG_FILAMENT_CHANGE_HEATING_2
2017-05-16 00:35:36 -05:00
oldmcg
b213a45efb
UBL_DELTA post merge cleanup ( #6705 )
...
* UBL_DELTA post merge cleanup:
fix fade_height, lost during some previous merge
fix float cx,cy which are not const
move repeated z_cxcy calc line inside loop
style fixes and comment fixes/alignment
* Update ubl_motion.cpp
remove unnecessary parentheses
* Update Conditionals_post.h
Change name of define to more accurate meaning:
UBL_GRANULAR_SEGMENTATION_FOR_CARTESIAN
which is not and should not be the default for cartesians with UBL.
2017-05-16 00:30:29 -05:00
Roxy-3D
6f86c46fa6
Fix typo that caused scope issues for DELTA ( #6750 )
2017-05-15 23:13:45 -05:00
Roxy-3D
1fbcbc05f6
UBL no longer flout's the sacred GCode standard ( #6745 )
...
Also clean up ubl_motion.cpp debug info and fix declaration of cx & cy
2017-05-15 16:25:01 -05:00
Scott Lahteine
c262ea92e0
Merge pull request #6733 from abusca/Euskera
...
Updated Basque translation
2017-05-15 02:30:11 -05:00
Scott Lahteine
267f77b18b
More constraint on axis_unhomed_error
2017-05-14 16:03:02 -05:00
Aaron Busca
645096b87a
Updated Basque translation
...
Updated Basque translation with new strings.
2017-05-14 18:29:50 +02:00
Roxy-3D
40d95a4e23
Update the gMax files to display better with Proportional Fonts ( #6727 )
...
Update the gMax files to display better with Proportional Fonts
2017-05-13 16:33:04 -05:00
Roxy-3D
c06af63f87
G26's default behaviour ought to be the entire mesh ( #6726 )
...
Adding the capability to specify ahead of time how much of the validation pattern to print made it so by default G26 only did one circle and no connecting lines.
It is more natural for the unsophisticated user to just do the entire mesh (bed). We default the repetition count to GRID_MAX_POINTS+1 to insure we get every last one of them!
2017-05-13 15:53:44 -05:00
Roxy-3D
15040821e0
Setup FolgerTech-i3-2020 files better for the user ( #6724 )
...
UltiPanel was enabled, but technically, it is a REPRAP_DISCOUNT_SMART_CONTROLLER
Either configuration works on the machine. But we want it 'Right'.
Setup the Proportional Font spacing so columns line up nicer on PronterFace and Repetier Host.
2017-05-13 15:14:03 -05:00
Scott Lahteine
67c9b1e332
Update M665 comment, fix M665 code_value code.
2017-05-13 05:11:29 -05:00
Scott Lahteine
37399e3cb5
Fix prepare_move_to_destination_cartesian for UBL
2017-05-13 04:13:19 -05:00
Scott Lahteine
a7fb55ea6d
Use GRID_MAX_POINTS. Some formatting
2017-05-12 06:57:19 -05:00
Scott Lahteine
e51b5774db
Merge pull request #6699 from mtowara/patch-1
...
Bugfix PRINTER_EVENT_LEDS
2017-05-12 05:58:25 -05:00
Scott Lahteine
056350d9bf
Merge pull request #6656 from FHeilmann/fix_fwretract_pos_z_move
...
Fix FWRetract with positive z-moves during retracted state
2017-05-12 05:56:08 -05:00
Scott Lahteine
0e582bcfb7
Fix #6691 - redundant line in M665
2017-05-12 05:17:38 -05:00
Markus Towara
68ae7c8d7a
Bugfix PRINTER_EVENT_LEDS
...
Extra closing curly bracket terminates while loop early if PRINTER_EVENT_LEDS defined
2017-05-12 12:13:23 +02:00
Scott Lahteine
ba29da56e0
Add disclaimer for verboten parameters
2017-05-12 02:34:53 -05:00
Scott Lahteine
0696dda470
Cleanups to UBL_DELTA
2017-05-12 02:34:53 -05:00
Scott Lahteine
cbfca29522
M421 tweaks, just to use const
2017-05-12 01:32:34 -05:00
Scott Lahteine
233f824dd6
Define GRID_MAX_POINTS
2017-05-12 01:32:34 -05:00
Scott Lahteine
b17e2d3dcd
Apply const in Marlin_main.cpp
2017-05-12 01:32:33 -05:00
Scott Lahteine
92fbea2906
Add some GCodes to the header of Marlin_main.cpp
2017-05-12 01:32:33 -05:00
Scott Lahteine
94e90ca26c
Tweak M80/M81 descriptions
2017-05-12 01:32:33 -05:00
Scott Lahteine
ee50dfaaf3
Adjust G26 arguments
2017-05-12 01:32:33 -05:00
Scott Lahteine
b0ba5cae73
Fix a spelling boo
2017-05-12 01:32:33 -05:00
oldmcg
91841d75c9
UBL_DELTA ( #6695 )
...
UBL on Delta's.... Should be close! Should not affect any Cartesian printer.
2017-05-11 22:33:47 -05:00
bgort
445003dbb8
Merge pull request #6694 from bgort/g29p2b
...
UBL: Minor improvement to G29 P2
2017-05-11 20:44:43 -04:00
Brian
5a5dba6fc8
UBL: Minor improvement to G29 P2
...
- allow H code value to override probing height
- minor cleanups
2017-05-11 18:54:34 -04:00
Brian
ae676490c9
M421: Add 'adjust closest point' capability
...
- Split M421 into separate versions for bilinear and ubl
- Fix minor issue in G26
2017-05-11 12:10:38 -04:00
Scott Lahteine
9a688d1456
Merge pull request #6682 from thinkyhead/bf_M80_s_arg
...
"M80 S" to report the state of the PSU pin
2017-05-10 20:29:01 -05:00
Roxy-3D
b63e82f309
M421 Mesh Point Offset and misc. UBL clean up ( #6685 )
...
* M421 Mesh Point Offset and misc. UBL clean up
Allow M421 to accept an offset as well as absolute value for a specified
mesh point.
And misc. UBL clean up to reduce redundent code.
* Better error checking for M421
* Fix M421 Y index bug
I just noticed.... We've had a Y index bug for who knows how long?
2017-05-10 18:54:10 -05:00
Pablo Ventura
539e0c2f31
"M80 S" to report the state of the PSU pin
2017-05-10 17:58:58 -05:00
bgort
df42428281
Merge pull request #6665 from bgort/font
...
Add proportional font adjustment ratio
2017-05-10 17:30:51 -04:00
Brian
2604742191
Add proportional font adjustment ratio
...
- update example configs
2017-05-10 17:19:03 -04:00
bgort
b3407a371b
Merge pull request #6676 from bgort/g26zhop
...
G26: Add 0.5mm Z-bump between circles to minimize pattern scraping
2017-05-10 17:12:05 -04:00
bgort
c33d99c5b2
Merge pull request #6680 from bgort/g26repeat
...
G26: Add 'Repeat' Option
2017-05-10 17:11:34 -04:00
Bob-the-Kuhn
7325035aac
Merge pull request #6637 from Tannoo/UBL_Menu_System_1.1
...
UBL Menu System 1.1
2017-05-10 15:54:48 -05:00
Brian
f7a201b0d0
G26: Add 'Repeat' Option
...
- Allows for specifying number of points to print/validate, using 'R' code like with G29 P4 Rx
- Moved the code for Random to 'M' so we could be consistent with G29 P4
- G26 instructions indenting/cleanup
2017-05-10 16:52:08 -04:00
Brian
9c5957fc77
G26: Add 0.5mm Z-bump between circles to minimize pattern scraping
2017-05-10 16:11:59 -04:00
Brian
4da14b14f4
UBL Cleanup/Bugfix
...
- Fix bug in ubl_line_to_destination
- Improve/fix output of some ubl.h functions
2017-05-10 13:56:17 -04:00
Tannoo
66db6c3acc
UBL Menu System 1.1
...
/**
* UBL System submenu
*
* Prepare
* - Unified Bed Leveling
* - Activate UBL
* - Deactivate UBL
* - Mesh Storage
* Memory Slot:
* Load Bed Mesh
* Save Bed Mesh
* - Output Map
* Map Type:
* Output Bed Mesh Host / Output Bed Mesh CSV
* - UBL Tools
* - Build Mesh
* Build PLA Mesh
* Build ABS Mesh
* - Build Custom Mesh
* Hotend Temp:
* Bed Temp:
* Build Custom Mesh
* Info Screen
* - Build Cold Mesh
* - Fill-in Mesh
* Fill-in Mesh
* Smart Fill-in
* Manual Fill-in
* Info Screen
* Continue Bed Mesh
* Invalidate All
* Invalidate Closest
* - Validate Mesh
* PLA Mesh Validation
* ABS Mesh Validation
* - Custom Mesh Validation
* Hotend Temp:
* Bed Temp:
* Validate Mesh
* Info Screen
* - Edit Mesh
* Fine Tune All
* Fine Tune Closest
* - Adjust Mesh Height
* Height Amount:
* Adjust Mesh Height
* Info Screen
* - Mesh Leveling
* 3-Point Mesh Leveling
* - Grid Mesh Leveling
* Side points:
* Level Mesh
* Info Screen
* - Output UBL Info
*/
2017-05-10 12:14:43 -05:00
Brian
3b0127cf8e
Fix compiler complaint related to M100
2017-05-09 21:45:44 -04:00
Scott Lahteine
11104f177b
Apply const in BABYSTEPPING
2017-05-09 12:37:23 -05:00
Scott Lahteine
081bf1f879
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
Scott Lahteine
a9487c9443
Reduce redundancy in BLTOUCH conditionals
2017-05-09 11:52:24 -05:00
Scott Lahteine
8d961b51cc
Eliminate M100 compiler warnings?
2017-05-09 11:32:15 -05:00
bgort
efb9ce24d9
Merge pull request #6645 from tcm0116/bltouch_config
...
Automatically define Z_MIN_PROBE_ENDSTOP_INVERTING for BLTouch
2017-05-09 09:49:16 -04:00
bgort
e2f07917ab
Merge pull request #6644 from tcm0116/bltouch_menu
...
Move BLTouch LCD menu from Main to Main/Control
2017-05-09 09:49:02 -04:00
Florian Heilmann
fe96376a73
Fix FWRetract with positive z-moves during retracted state
2017-05-09 13:54:57 +02:00
Scott Lahteine
47cae2929f
Patch platformio.ini to fix build error in DevIoT
...
For compatibility with DevIoT, until that can be solved.
2017-05-08 20:27:14 -05:00
Scott Lahteine
911a87e006
Disable SCARA feedrate scaling by default
2017-05-08 14:41:03 -05:00
Scott Lahteine
71396f77d3
Cleanups following recent commits
2017-05-08 14:23:01 -05:00
Scott Lahteine
dca48f0e63
Move platformio.ini back to Marlin folder - it works there
2017-05-08 14:23:01 -05:00
Scott Lahteine
a6dafb058e
Small reduction in error code size
2017-05-08 13:58:09 -05:00
Scott Lahteine
a1e04942a2
Cleanup to software PWM variables
2017-05-08 13:51:45 -05:00
Thomas Moore
a20d0794e6
Automatically define Z_MIN_PROBE_ENDSTOP_INVERTING for BLTouch
2017-05-08 16:28:44 +00:00
Thomas Moore
3279337f47
Move BLTouch LCD menu from Main to Main/Control
2017-05-08 15:21:01 +00:00
Brian
6cb0fa4128
Cleanup previous implementation of new quiet probing
...
Saves a few lines of code.
2017-05-08 08:13:46 -04:00
bgort
4b7f8ad9c6
Merge pull request #6610 from bgort/pio-improvements2
...
PlatformIO-related changes
2017-05-08 07:52:42 -04:00
Scott Lahteine
56ca47ab9d
Patch configuration temp units
2017-05-07 21:32:01 -05:00
Scott Lahteine
421dd62800
Adjust spacing of "spaces"
2017-05-07 21:28:54 -05:00
Scott Lahteine
26dba44cd3
Patch redundant lcd settings
2017-05-07 21:28:54 -05:00
Scott Lahteine
34b5041576
Spacing adjustment, ubl_G29
2017-05-07 21:28:54 -05:00
Scott Lahteine
1c4ed8b106
Note 5 extruders in config comments
2017-05-07 21:28:54 -05:00
Scott Lahteine
6e4a5cc8c6
Patch missing const in temp_abs
2017-05-07 21:13:44 -05:00
bgort
d35e2fda10
Merge pull request #6622 from bgort/silentprobing
...
Improve BLTOUCH_HEATERS_OFF functionality
2017-05-07 21:33:44 -04:00
Scott Lahteine
6ed52fb765
Adjust spacing in LSF
2017-05-07 19:11:52 -05:00
Roxy-3D
110afff415
More misc UBL fixes and update gMax examples ( #6632 )
...
I think I forgot to Sync before I committed last time. Some UBL
changes did not stick.
Also, update the gMax configuaration.h file so other than unique numbers
and settings, it exactly matches the default configuration.h file.
2017-05-07 19:02:24 -05:00
Roxy-3D
d92fa40c62
misc. UBL fixes ( #6631 )
...
* Restore LSF functionality
Some of the typo's persisted... Hopefully this gets them all fixed.
* Restore user's expectations of how G28 should behave
* Allow Nozzle size control with ornery host programs
2017-05-07 18:23:48 -05:00
Brian
faa270071d
Improve BLTOUCH_HEATERS_OFF functionality
...
- rename to PROBING_HEATERS_OFF
- move heater pausing functionality into thermalManager
- add variables, pause(), ispaused(), other functions
- add fan pausing functionality -> PROBING_FANS_OFF
- add probing_pause() wrapper
- move pausing into do_homing_move() and do_probe_move() to minimize quiet time and so other probe types can benefit
- example configs
2017-05-07 16:22:08 -04:00
lrpirlet
d66e9efac5
G29 P1 stops reporting Invalid location with this patch
2017-05-07 15:07:26 +02:00
Scott Lahteine
ce507deb9f
Support temperature units in M503
2017-05-06 20:24:51 -05:00
bgort
a59066bca9
Various improvements - mostly UBL-related ( #6607 )
...
UBL Clean up.
2017-05-06 18:59:16 -05:00
Brian
0446dd3ad8
PlatformIO-related changes
...
- move platformio.ini out of source directory to be more consistent with 'normal' PlatformIO usage
- facilitates IDE integration
- add related .gitignores
2017-05-06 06:22:10 -04:00
Scott Lahteine
77769e284f
Edit configuration comments
2017-05-05 13:32:31 -05:00
Scott Lahteine
6876e79d42
Tweak command index increment
2017-05-05 13:32:31 -05:00
Scott Lahteine
7fcb5c1424
Minor fix in K8200 readme
2017-05-05 11:25:11 -05:00
Max Matveev
267f3a03d9
Fixed USE_CONTROLLER_FAN #define usage
2017-05-04 23:38:29 +02:00
bgort
ae7c602031
fix error in M105 output -- use SERIAL_PROTOCOL for ints instead of SERIAL_PROTOCOL_F ( #6584 )
...
also removed wayward 'address of' ampersand in setTargetHotend and setTargetBed parameters
2017-05-04 16:09:45 -05:00
Scott Lahteine
3cd9af2409
bugfix-1.1.x ReadMe, Version, helper scripts
2017-05-04 07:17:10 -05:00
Florian Heilmann
15268770f5
Fix broken fwretract recovery extruder feedrate
...
When both lowering and recovery are performed using the same "prepare_move_to_destination()" the extruder recovery feedrate ends up being ignored and, instead, is only capped by either the maximum e-speed or the time it takes to perform the z-lowering.
Performing the two moves separately from each other ensures a correct recovery feedrate.
2017-05-04 11:34:28 +02:00
Scott Lahteine
58210c3a19
Merge pull request #6568 from thinkyhead/rc_bilinear_extension
...
Add EXTRAPOLATE_BEYOND_GRID option to bilinear leveling
2017-05-04 00:46:05 -05:00
Scott Lahteine
da08e11acd
Add EXTRAPOLATE_BEYOND_GRID option to bilinear leveling
2017-05-04 00:19:07 -05:00
Scott Lahteine
6834e36871
Merge pull request #6567 from thinkyhead/rc_sdcard_stop
...
Shutdown heaters, autotemp on SD Cancel
2017-05-03 23:54:29 -05:00
Scott Lahteine
399efd66ed
Click to resume
2017-05-03 22:26:06 -05:00
Scott Lahteine
1196e3ca59
SDCard print completion can use "M0"
2017-05-03 22:24:03 -05:00
Scott Lahteine
6854f08d22
Shut down autotemp in disable_all_heaters
2017-05-03 20:54:26 -05:00
Thomas Moore
acec237092
Shutdown heaters and fan after canceling a print from the SD card
2017-05-03 20:43:09 -05:00
Scott Lahteine
11b6a3cbb6
Fix regression in least_squares_fit.cpp
2017-05-03 19:21:44 -05:00
Scott Lahteine
e1b85ff67b
Merge pull request #6559 from thinkyhead/rc_more_optimal
...
Compact smart_fill_mesh slightly
2017-05-03 19:07:36 -05:00
Scott Lahteine
9890141f7b
M100 tweak
2017-05-03 17:28:09 -05:00
Scott Lahteine
2658cc707a
Treat temperature as integer, when possible
2017-05-03 17:27:25 -05:00
Scott Lahteine
1b2c7ec20a
Make G26 compatible with inches and thermal unit modes
2017-05-03 17:12:48 -05:00
Scott Lahteine
241bdffe65
Dress up Bilinear Leveling code
2017-05-03 17:12:35 -05:00
Scott Lahteine
67ecf06cc4
Patch issue in gcode_M900
...
Noted in #6550
2017-05-03 15:26:00 -05:00
Scott Lahteine
de5e485ed7
Explicit upward angle solution
2017-05-03 01:19:44 -05:00
Scott Lahteine
ecdf68735f
Compact smart_fill_mesh slightly
2017-05-03 01:06:58 -05:00
Scott Lahteine
628391304f
Merge pull request #6552 from thinkyhead/rc_more_ubl_cleanup
...
Further cleanup of UBL
2017-05-02 22:46:04 -05:00
Scott Lahteine
902fe76db9
Merge pull request #6556 from thinkyhead/rc_use_controller_fan
...
Implement USE_CONTROLLER_FAN as a feature
2017-05-02 22:43:26 -05:00
Scott Lahteine
7ba7474a73
Drop extra parens from address-of operator
2017-05-02 22:22:23 -05:00
Scott Lahteine
0bf5add075
Use UBL_MESH_(MIN|MAX)_[XY] for G29 move limits
2017-05-02 22:22:23 -05:00
Scott Lahteine
b8ba3b7647
Use 'sq' macro where possible
2017-05-02 22:22:23 -05:00
Scott Lahteine
66eba3346b
Remove G29 lcd control debugging
2017-05-02 22:22:23 -05:00
Scott Lahteine
3517154135
Reduce code size, fix bug in smart_fill_mesh
2017-05-02 22:22:23 -05:00
Scott Lahteine
c4e34adcf1
Apply formatting, coding standards to UBL
2017-05-02 22:22:23 -05:00
Scott Lahteine
f4239e62b1
Merge pull request #6557 from thinkyhead/rc_hotend_status_item
...
Keep refreshing LCD if hotend status is on-screen
2017-05-02 22:04:21 -05:00
Scott Lahteine
fc857c5b78
Merge pull request #6549 from thinkyhead/rc_bltouch_refix
...
Fix BLTOUCH_HEATERS_OFF bug
2017-05-02 21:53:09 -05:00
Thomas Moore
b39f634252
Continuously update LCD when hotend status is displayed in Filament Change screens
2017-05-02 21:49:40 -05:00
Scott Lahteine
2c13922c46
Implement USE_CONTROLLER_FAN as a feature
2017-05-02 20:18:52 -05:00
Scott Lahteine
492bc536bf
Modify debug methods to take PSTR
2017-05-02 17:53:40 -05:00
Bob-the-Kuhn
e5a27d9f36
G29 P2 & P4 bug fixes & improvements
2017-05-02 17:53:40 -05:00
Scott Lahteine
b93be716cf
Remove trailing whitespace
2017-05-02 17:53:40 -05:00
Scott Lahteine
76eca9732d
Fix mis-named language string define in Dutch
2017-05-02 16:08:09 -05:00
Scott Lahteine
806f670092
Merge pull request #6511 from Bob-the-Kuhn/UBL--G26-minor-improvements
...
UBL: G26 minor improvements
2017-05-02 16:06:22 -05:00
Scott Lahteine
0803c9d997
Merge pull request #6533 from thinkyhead/rc_autocal_patches
...
General cleanup of G33
2017-05-02 16:01:02 -05:00
Brian
ff5fed137f
Fix BLTOUCH_HEATERS_OFF bug
2017-05-02 15:53:52 -05:00
Scott Lahteine
ca1dd739a3
Organize ubl.h defines by the files they serve
2017-05-02 15:47:06 -05:00
Scott Lahteine
0449f69179
Cleanup patch to recent merge
2017-05-02 15:47:06 -05:00
LVD-AC
da2abad636
Various cleanups of G33
...
- update comment section
- redefined P5 grid
- minor clean to probe radius routine
- updated EEPROM version to V37 according remark in #6517
2017-05-02 15:47:06 -05:00
Bob-the-Kuhn
7ce613db0a
Fix Conditionals test for endstop plug used by Z2 or probe.
2017-05-02 15:41:47 -05:00
Scott Lahteine
ef750ae86b
Towards supporting Z2 in Endstops::report_state
2017-05-02 15:39:32 -05:00
Scott Lahteine
c03c623951
Sanity-check Z2 endstop assigned to a nonexistent pin.
2017-05-02 15:39:00 -05:00
Scott Lahteine
70f31b6c76
Throw an error if no E stepper is free for X2, Y2, Z2
2017-05-02 15:13:47 -05:00
Scott Lahteine
ac69eca586
Merge pull request #6538 from bgort/ubl_gridlbls
...
Fix, cleanup, prettify `G29 O` output
2017-05-02 14:09:18 -05:00
Scott Lahteine
99b11db1a1
Merge pull request #6537 from thinkyhead/rc_cleanup_sunday
...
Various leveling-related patches
2017-05-02 00:59:59 -05:00
Roxy-3D
41e63bbb7c
Fix Horizontal and Vertical UBL optimization bug. ( #6540 )
...
* Fix Horizontal and Vertical optimization bug.
And drastically reduce the debug code foot print....
* Yeah Baby!
The debug print is going A - OK !
2017-05-01 23:52:33 -05:00
Scott Lahteine
e79b335367
Patches for leveling reactivation in G28 / M48
2017-05-01 17:38:57 -05:00
Brian
92e22c3bf2
Fix, cleanup, prettify G29 O output
2017-05-01 18:19:57 -04:00
Scott Lahteine
7d5cd7e0d7
Tweak set_bed_leveling_enabled
2017-05-01 16:46:52 -05:00
Scott Lahteine
ed81e9b3d3
Adjust leveling conditionals
2017-05-01 16:46:48 -05:00
Scott Lahteine
a64e5659ce
Clean up G26 external references, private vars
2017-05-01 15:17:52 -05:00
Scott Lahteine
2887c20788
Add a function to home all axes (i.e., gcode_G28)
2017-05-01 15:03:37 -05:00
Scott Lahteine
8f895d5e01
Merge pull request #6530 from thinkyhead/rc_cleanups_2
...
Fixes for DUAL_NOZZLE_DUPLICATION_MODE
2017-05-01 12:34:11 -05:00
Scott Lahteine
8002672938
Fixes for DUAL_NOZZLE_DUPLICATION_MODE
2017-05-01 12:20:25 -05:00
Scott Lahteine
f69acde966
Merge pull request #6528 from MarlinFirmware/revert-6416-negative-mesh-fix
...
Revert "Fix for Meshpositions if printer has negative endstop positions"
2017-05-01 11:51:13 -05:00
Scott Lahteine
4803a4322e
Revert "Fix for Meshpositions if printer has negative endstop positions"
2017-05-01 11:25:07 -05:00
Scott Lahteine
4f74c416a4
Patch for BLTOUCH_HEATERS_OFF
2017-05-01 11:13:40 -05:00
Scott Lahteine
1823a6ea29
Patch for missing DELTA_HEIGHT
2017-05-01 11:05:35 -05:00
Scott Lahteine
d814e468d2
Fix set_heaters_for_bltouch and usage
...
- Only call `set_heaters_for_bltouch` when actually deploying/stowing
- Clear `next_emi_protection` when re-enabling heaters
2017-05-01 02:27:52 -05:00
Brian
4e1448e75a
Various fixes for compiler warnings
...
add BLTouch-related messages in english and (rusty) french;
add missing endstops.h in ultralcd.cpp;
fix misc. compiler warnings;
fix lsf_reset - ZERO macro can't handle a pointer as it would only memset the size of the pointer, not the size of the entire struct
2017-05-01 02:12:40 -05:00
Scott Lahteine
fc9919b749
Merge pull request #6515 from thinkyhead/rc_cleanup_sunday
...
Some minor cleanups to code formatting
2017-04-30 22:58:16 -05:00
Scott Lahteine
c12bc51a59
cardreader.cpp spacing tweak
2017-04-30 22:27:47 -05:00
Scott Lahteine
46b714a52f
Cleanup spacing in pinsDebug.h
2017-04-30 22:27:26 -05:00
Scott Lahteine
88141ca717
Remove things that aren't pins from pinsDebug_list.h
2017-04-30 22:24:51 -05:00
Scott Lahteine
ff35b11d08
Resolve compiler complaint about memset volatile *
2017-04-30 22:24:03 -05:00
Scott Lahteine
0b421e97c9
Rename some (unused) OMCA pins
2017-04-30 22:16:44 -05:00
Scott Lahteine
c2c9f01c8e
Patch newly-introduced bug in IS_Z2_OR_PROBE
2017-04-30 20:17:10 -05:00
Scott Lahteine
819df5e06d
Cleanups to pins debugging
2017-04-30 20:17:10 -05:00
Scott Lahteine
42824b0e1f
Use new serial spacing function to save PROGMEM
2017-04-30 20:14:42 -05:00
Scott Lahteine
cd72901fb7
Cleanups to UBL code
2017-04-30 20:14:42 -05:00
Bob-the-Kuhn
ce87c7803e
implement G26 changes per review
2017-04-30 19:05:25 -05:00
jaysonkelly
769817ce5e
Need to define this for Rigidboard V2
...
Motor current defaults need to be defined for Rigidboard
2017-04-30 19:04:27 -05:00
Scott Lahteine
39c6c5621b
Merge pull request #6416 from SkyNet3D/negative-mesh-fix
...
Fix for Meshpositions if printer has negative endstop positions
2017-04-30 17:38:41 -05:00
Scott Lahteine
671a44b8aa
Merge pull request #6410 from teemuatlut/LVD-Delta
...
Delta auto-calibration updates
2017-04-30 16:39:51 -05:00
Scott Lahteine
5d5c9a040a
Merge pull request #6509 from thinkyhead/rc_config_patches
...
Configuration cleanup
2017-04-30 16:10:27 -05:00
Scott Lahteine
d480b6f75a
Enable E1 stepper for DUAL_NOZZLE_DUPLICATION_MODE
2017-04-30 16:01:01 -05:00
Bob-the-Kuhn
dcde202157
Add startup notice & update host temperatures while waiting
...
Right now G26 doesn't send a notice to the host that it's running. It's
not until the heaters are at temperature that you know for sure if it's
running or not.
Added host temperature prints so that someone watching the host
interface will see the temperatures change during the warm up period.
Updates are sent every 5 seconds.
2017-04-30 15:51:58 -05:00
Scott Lahteine
54751e8557
Put DISTINCT_E_FACTORS adjacent to the affected settings
2017-04-30 15:30:31 -05:00
Scott Lahteine
0dbe4b3e54
Edit configurations to reduce verbosity, arrange logically
2017-04-30 15:30:31 -05:00
Scott Lahteine
0750933bc6
Merge pull request #6490 from Bob-the-Kuhn/Missing-X-stop
...
Endstop not enabled if pin is zero
2017-04-30 15:09:36 -05:00
bgort
5ace3699b1
Output (commented) coordinates on G29 S-1; helps identify the x/y points that correspond with i/j coordinates, which eases manual tweaking of z values ( #6507 )
2017-04-30 14:59:34 -05:00
Scott Lahteine
d7d4378481
Remove inaccurate version description
2017-04-30 14:57:19 -05:00
Scott Lahteine
f169c04604
Merge pull request #6491 from thinkyhead/rc_cleanup_wednesday
...
Various cleanups for recent merges
2017-04-30 14:56:48 -05:00
Scott Lahteine
6d63255ddc
Merge pull request #6508 from bgort/pio_improvements
...
PlatformIO-related improvement
2017-04-30 14:53:22 -05:00
LVD-AC
cafc48dff8
little oops
2017-04-30 22:17:49 +03:00
Brian
627730948d
Add U8glib as a dependency to platformio.ini for those who use PlatformIO; this makes compiling even easier as u8glib will be downloaded and included automatically.
...
Also added the new .pio-related directory to .gitignore, and a few ignores for those who use cmake.
2017-04-30 15:13:51 -04:00
bgort
5974d8e168
change G26 default nozzle size to 0.4, consistent with instructions ( #6506 )
2017-04-30 13:23:46 -05:00
LVD-AC
471a321624
leaner code for probe routine
2017-04-30 19:15:16 +03:00
bgort
3c0d5ba0a1
allow idle() to be called - fixes sometimes crash/hang in G29 I; ( #6505 )
2017-04-30 10:22:31 -05:00
Roxy-3D
2509587b5a
Correct over optimization of pre-initialized variables ( #6500 )
...
* Correct over optimization of pre-initialized variables
NEAR_ZERO() works most of the time... But it leaves corner cases
uncovered. We need to explicitly check if these variables are +/-
infinity.
* Correct over optimization of pre-initialized variables
2017-04-29 22:01:29 -05:00
LVD-AC
585c00a728
Proposed changes
...
This is what I did yesterday:
- basicly gave the tests more comprehensive names; put all the
declarations at the top; got rid of the magic negative C-value (renamed
to P + A, O, T)
- "cos(RADIANS(180 + 30 * axis)) * (1 + circles * 0.1 * ((zig_zag) ? 1 :
-1)) * delta_calibration_radius" compiles wrong is zig_zag statement is
without brackets
- DELTA_TOWER_ANGLE_TRIM reset to 3 values (the calcs use the 3th value
to normalize will not compile otherwise)
-Wrote 3 dummies to keep EEPROM lenght the same
-Reset the configs to the 'original' with autocal + menu disabled (but
can be enabled of course)
2017-04-29 18:53:14 +03:00
Scott Lahteine
29fa241617
Initial patches to G33
2017-04-29 15:29:49 +03:00
Scott Lahteine
12ce051b55
Add a function to output spaces to serial
2017-04-29 15:29:49 +03:00
Scott Lahteine
42f4c53254
Starting on G33 rewrite
2017-04-29 15:29:49 +03:00
Scott Lahteine
baf3b91460
DELTA_TOWER_ANGLE_TRIM only needs AB
2017-04-29 15:29:49 +03:00
emartinez167
27cd165adf
Last three Spanish language strings
...
Updates as per @thinkyhead request.
2017-04-29 11:33:30 +08:00
Scott Lahteine
2cc9774f34
Apply bltouch_menu
...
As proffered in #6252
2017-04-28 18:43:03 -05:00
Scott Lahteine
1a111180de
Clean up set_heaters_for_bltouch
2017-04-28 18:32:39 -05:00
Scott Lahteine
7db805930a
Cleanup configurations
2017-04-28 18:32:39 -05:00
Scott Lahteine
8bf3a3fcdb
Remove inaccurate comments from ubl.h
2017-04-28 18:32:38 -05:00
Scott Lahteine
47557d5a19
Fix up formatting in ubl.h
2017-04-28 18:32:38 -05:00
Scott Lahteine
0a8e09c723
Clean up excess whitespace, comment formatting
2017-04-28 18:32:38 -05:00
Scott Lahteine
a35c681453
Clean up least_squares_fit
2017-04-28 17:33:28 -05:00
Bob-the-Kuhn
40089249c3
add PIN_EXISTS to HAS_xyz_MIN macro
2017-04-28 16:47:59 -05:00
Scott Lahteine
8020069371
Apply coding standards for indentation
2017-04-28 15:43:06 -05:00
Scott Lahteine
dabca83742
Merge pull request #6437 from Kaibob2/patch-1
...
Update language_de.h
2017-04-28 14:47:47 -05:00
Kai
3d0a4c4ea9
Update language_de.h
2017-04-28 21:09:10 +02:00
Silvio
6bf1d50188
Added missing translations ( #6458 )
2017-04-28 13:49:16 -05:00
Mehmet Sutas
404f767d44
Update language_tr.h ( #6463 )
2017-04-28 13:48:31 -05:00
Petr Zahradnik
5e701524f8
Update language_cz.h for new translations ( #6465 )
...
* Update language_cz.h for new translations
* Correction translate
* Revert correction back to hotend
2017-04-28 13:47:43 -05:00
gege2b
0a92ce7a98
Completed french translation ( #6475 )
2017-04-28 13:46:09 -05:00
Ernesto Martinez
ff4fb42e7d
Add new strings as per recent changes in RCBugFix ( #6482 )
...
Adding missing strings to Spanish language, as per changes recently
done to the RCBugFix branch.
2017-04-28 13:45:22 -05:00
paulusjacobus
67d1fc5556
Update language_nl.h ( #6478 )
...
updated the RCbugfix release with additional Dutch translations
2017-04-28 13:42:39 -05:00
benlye
8c6b4537a6
Fix issue in itostr4sign with numbers <100 ( #6487 )
...
The first character in the string wasn't blanked if the number went from >= 100 to <100, resulting in artefacts in the displayed string.
2017-04-28 13:35:11 -05:00
LVD-AC
4ea8d0f89b
Solved "The Travis CI build failed "
2017-04-28 19:55:21 +03:00
LVD-AC
ed6b361e27
cleanup ready to squash
2017-04-28 18:09:18 +03:00
LVD-AC
7a6a1ef583
M666 normalize positive values to <=0
...
M666
+ tower radians absolute value
2017-04-28 18:05:24 +03:00
Roxy-3D
4075b95519
Allow BL-Touch users to control heaters during probe event ( #6485 )
...
The Configuration.h file entries for BL-Touch have been updated to:
```cpp
//#define BLTOUCH
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are
turned off during probe event
```
2017-04-28 09:19:55 -05:00
Roxy-3D
6e8ecb908a
Shut down heaters during BL-Touch probe event
...
The electro-magnetic interference from the bed and nozzle are affecting
the BL-Touch repeatability for some users. This problem can be helped
by shutting down the heaters during the actual probe event and then
quickly turning them back on.
Because this code is messing with the heaters, it is written in a
paranoid manner. It only turns the heaters back on if everything is
EXACTLY as it expects things to be. The BL-Touch probe must have been
put into a deployed state less than 20 seconds prior, or the stow()
function will NOT turn the heaters on.
This code has been tested and works for both G28 and probing functions.
2017-04-27 18:52:58 -05:00
LVD-AC
d8102aeca8
Cn negative : no tower angle calibration
...
Giving a negative number of probe points disables the tower angle
correction calibration ('4point' instead of '7point' solution)
EEPROM version updated
2017-04-27 21:13:07 +03:00
Roxy-3D
3601f08e87
Better tuned FolgerTech i3-2020 example file
2017-04-27 11:16:38 -05:00
Roxy-3D
a20b7d9581
Better tuned Example file for FolgerTech i3-2020
...
Also setting up Z-Probe on the machine.
2017-04-27 11:16:38 -05:00
Kai
bf2fe46062
Update language_de.h
2017-04-27 10:13:02 +02:00
Kai
11d34be060
Update language_de.h
2017-04-27 10:06:26 +02:00
Scott Lahteine
817ecb9ff4
Merge pull request #6453 from thinkyhead/rc_cleanup_wednesday
...
Minor cleanups, work-in-progress
2017-04-26 19:41:52 -05:00
Roxy-3D
22f6e277af
Get example files fully into compliance
...
Change to support new name GRID_MAX_POINTS_XY
Start UBL at version 1.0 in the CUSTOM_MACHINE_NAME
2017-04-26 16:22:17 -05:00
LVD-AC
a9bc1d30cc
z_offset change
...
Avoids to have to recalibrate the delta_height after a z_offset change
2017-04-26 21:57:11 +03:00
Roxy-3D
ec26e23e7e
Add my two 'Nice' machines as example configurations
...
These are my two 'Nice' machines. Both are good example machines. The
FolgerTech i3-2020 is probably the best value kit on the market right
now. And it has developed a 'Cult Following' of hobbiests. I'll always
have an up to date Configuration.h file set for it, so it may as well be
an example configuration.
And the gCreate gMax 1.5+ is the best printer I've ever seen that runs
Marlin. For sure, I'll always have up to the minute Configuration.h
files for this printer also. I've moved over to using the gMax as my
primary development machine for Marlin. So... Besides being a good
machine, it is a nice convienience for me to have this Configuration.h
file as an 'Example'.
2017-04-26 12:46:12 -05:00
Scott Lahteine
adb8e68592
Fix stuck "Print Aborted" LCD message
...
Fixes #6393
2017-04-26 06:24:23 -05:00
Scott Lahteine
096b927102
Minor optimization of FILAMENT_WIDTH_SENSOR
2017-04-26 06:24:23 -05:00
Scott Lahteine
5bdb0b567d
Cosmetic patches
2017-04-26 06:24:23 -05:00
Kai
38ae7f4238
Added more translation strings
...
There are some quite tricky ones which are hardly translateable.
Maybe @Sebastianv650 can review this
2017-04-26 11:58:11 +02:00
Scott Lahteine
4d96d3eab1
Bootscreen delay after clear, then set chars
...
Fixes #6426
2017-04-25 23:37:28 -05:00
Scott Lahteine
5512130d6c
Only set Compare Mode for channel A
...
Fixes #6445
2017-04-25 23:14:16 -05:00
Roxy-3D
d467e97679
Smart-Fill and Mesh-Tilting (both 3-point and grid) working!
...
Also... The memory corruption issue may be fixed. The GCC compiler
was inlining static functions and this caused the G29() stack frame to
become much larger than the AVR could handle.
2017-04-25 21:03:41 -05:00
Scott Lahteine
a699967ec8
Merge pull request #6443 from thinkyhead/rc_interrupt_fastio
...
Patch fastio.h with Timer 2 interrupt support
2017-04-24 20:09:41 -05:00
Scott Lahteine
2823bf0874
Update fastio.h with special handling for Timer 2
2017-04-24 16:58:22 -05:00
Scott Lahteine
fd535e111a
Fix up XYZ_CONSTS_FROM_CONFIG macro
2017-04-24 14:05:11 -05:00
Kai
03c2f756b9
Update language_de.h
2017-04-24 13:32:16 +02:00
LVD-AC
dcf30a69d6
Allowing #define DELTA_TOWER_ANGLE_TRIM[C_AXIS]
...
More consistent with M665 where C-value is allowed as well, then
normalized
2017-04-23 14:51:24 +03:00
Brian
f41fb2b635
Numerous UBL-related changes:
...
* relocated ubl state to config. store:
* removed a number of ubl state variables and padding which were largely unused - saved 58 bytes of both SRAM and EEPROM;
* modified ubl sanity_check - no longer checks removed state variables that were otherwise unused, where checking didn't seem to accomplish anything, ultimately;
* removed pre_initialized state, saving 64 bytes of SRAM;
* removed automatic saving of UBL state after UBL activation/deactivation;
* consolidated multiple GRID_MAX_POINTS_X/Y to 'Global Leveling' section of EEPROM;
* minor update to G29 Sx notes/instructions;
* renamed mesh load and save parameter to 'slot' from 'm' for clarity;
2017-04-22 18:44:39 -05:00
Brian
f1a4758cef
use progmem instead of sram for mesh_index_to_x/ypos array;
...
fix maximum mesh_index_ array size at 16 (15+1);
2017-04-22 18:34:49 -05:00
Scott Lahteine
87d240042a
Optimize number-to-string functions, no-fan display
2017-04-22 16:23:15 -05:00
Scott Lahteine
959566cf0a
Update note about M163 / M164
2017-04-22 16:23:15 -05:00
Scott Lahteine
830851df13
Spend some SRAM to optimize bilinear leveling
2017-04-22 16:19:31 -05:00
Scott Lahteine
091179d960
bed_level_grid => z_values (also *_virt array)
2017-04-22 16:19:31 -05:00
Scott Lahteine
23cdbbb2d3
Add a method to refresh bilinear bed level after a change
2017-04-22 16:19:30 -05:00
Scott Lahteine
ccda63c473
Drop the accessor form for LCD value editing
2017-04-22 16:19:30 -05:00
Scott Lahteine
10da175be5
Fix a pair of compiler complaints
2017-04-22 16:19:30 -05:00
Scott Lahteine
ff0018e287
Format hex values as uppercase
2017-04-21 21:42:41 -05:00
android444
77aa16005d
Polish font
...
Add polish font for GLCD displays only.
HD44780 work properly without polish character.
Update language_pl.h.
2017-04-21 21:42:41 -05:00
teemuatlut
244f67590e
Delta probe height bug solved
2017-04-22 02:23:56 +03:00
Hans Raaf
406a83ff2d
Fix for Meshpositions if printer has negative endstop positions
2017-04-22 00:16:16 +02:00
benlye
3ed737425d
Fix typo in new SET_COM macro
2017-04-21 15:08:18 -05:00
Brian
88649b06a6
use planner.z_fade_height, etc. instead of private, ubl-specific g29 fade height
2017-04-21 09:09:09 -05:00
LVD-AC
004928148c
Tower angles
...
Adding '7-point' tower angle correction calibration
2017-04-21 12:48:45 +03:00
LVD-AC
76ec7a0f80
Adding upto 7*7 probe grids
...
- adding Cn 5, 6 and 7
2017-04-21 11:58:39 +03:00
LVD-AC
d4f593d200
Delete 'expert level'
...
and getting rid off verbose level 3 and configuration_adv settings
2017-04-21 11:58:39 +03:00
LVD-AC
13c8493878
M665 rework and related issues (all delta's)
...
- Making M665 compatible with repetier (see
http://reprap.org/wiki/G_code#M665:_Set_delta_configuration )
- M665 B also sets the radius for manual calibration menu
- Converting tower ajustment definitions to arrays - tower angle
corrections compatible with Esher 3D wizzard
- Only tower angles need to be adjustable with M665 and stored to EEPROM
- tower radius and diag rod can be adjusted in the FW only with #define
2017-04-21 11:58:39 +03:00
Scott Lahteine
e0e069c6d8
Clean up trailing whitespace
2017-04-20 17:52:07 -05:00
Scott Lahteine
9b94210394
Bring FLSUN config more up to date
2017-04-20 17:52:06 -05:00
Scott Lahteine
b0aa256bc0
Updates for all configs
2017-04-20 17:52:05 -05:00
Scott Lahteine
ee46ce1743
Add and apply interrupt helper macros
2017-04-20 16:04:29 -05:00
Scott Lahteine
6131c62499
General cleanup
2017-04-20 16:04:29 -05:00
benlye
2c86dfd3b5
Fix compiler type conversion errors after LCD changes
2017-04-20 16:04:29 -05:00
Scott Lahteine
55f9e76610
Merge pull request #6367 from thinkyhead/rc_cleanup_followup
...
Cleanup after some direct commits
2017-04-20 15:13:24 -05:00
Scott Lahteine
d38a792a91
Merge pull request #6382 from MagoKimbra/fix_configuration_store
...
Fix double definition in configuration_store
2017-04-20 15:06:58 -05:00
Scott Lahteine
b98bc034ae
Replace c_assert hack with static_assert
2017-04-19 13:07:35 -05:00
Scott Lahteine
5eb2b1a790
Clear up G29 compiler warnings
2017-04-19 13:07:35 -05:00
Scott Lahteine
4ce2a63db0
Apply const, spacing to Marlin_main.cpp
2017-04-19 13:07:34 -05:00
Scott Lahteine
e97f1284c1
Cleanup of pins testing code
2017-04-19 13:07:34 -05:00
Scott Lahteine
e9b53ae00c
Cleanup after some direct commits
...
https://github.com/MarlinFirmware/Marlin/commit/5e9726530ff21d3bc62beaa6
ac1b9437c276130a
2017-04-19 13:07:34 -05:00
Scott Lahteine
e05d050a1e
Add hex routine to print an address
2017-04-19 13:07:34 -05:00
Scott Lahteine
4542282f5e
Fix broken TOGGLE macro in fastio.h
2017-04-19 12:38:13 -05:00
MagoKimbra
ed52275a14
Fix double definition in configuration_store
2017-04-18 17:57:40 +02:00
Scott Lahteine
de569e3d4e
Merge pull request #6327 from Bob-the-Kuhn/M43-toggle-&-Z-probe-fixes
...
M43 Toggle & Z servo test - fix bug & add another check
2017-04-18 03:21:57 -05:00
Scott Lahteine
f33a650ecc
Merge pull request #6368 from thinkyhead/rc_linear_advance_eeprom
...
Add Linear Advance values to EEPROM and LCD
2017-04-18 02:54:12 -05:00
Scott Lahteine
a00ae4790a
Replace M905 with unique code M900
2017-04-17 16:39:37 -05:00
Scott Lahteine
1286d9603d
Clean up and organize ultralcd.cpp
2017-04-17 16:39:36 -05:00
Scott Lahteine
3cdf78a79f
MSG_VOLUMETRIC => MSG_FILAMENT
2017-04-17 16:39:36 -05:00
Thomas Moore
f8e77d6545
Add Linear Advance values to EEPROM and enable configuration of K via LCD
2017-04-17 16:39:36 -05:00
Scott Lahteine
eb2d073dae
Add M905 R for setting the E/D ratio directly
2017-04-17 16:39:36 -05:00
Scott Lahteine
69dfa54a84
Use code_value_linear_units for known-linear axes
2017-04-17 16:39:36 -05:00
Scott Lahteine
b956f2642b
Show M503 report with current linear units
2017-04-17 16:39:36 -05:00
Scott Lahteine
ba4a005ceb
Merge pull request #6373 from mtowara/mt_makefile_fix
...
Fix Makefile build
2017-04-17 16:16:37 -05:00
towara
150b15c311
fix compiler errors generated by more stringent flags in Makefile:
...
- use volatile for registers
- avoid implicit casts
2017-04-17 11:59:47 +02:00
towara
f6095c9325
fix missing serial.cpp in Makefile
2017-04-17 11:59:03 +02:00
Scott Lahteine
871f92378c
Tweak headings in EEPROM structure
2017-04-16 18:42:33 -05:00
Scott Lahteine
bf2548be4a
Merge pull request #6362 from tcm0116/babystepping
...
Only queue babysteps if axis is in a known position
2017-04-16 17:46:06 -05:00
dot-bob
9c410ddf68
Fixed an issue where a display with a hardware reset pin (LCD_RESET) may not get initialized properly.
2017-04-15 22:45:15 -06:00
Thomas Moore
72a7fac461
Only queue babysteps if axis is in a known position
2017-04-15 23:19:43 -05:00
Roxy-3D
5e9726530f
Setup to find data corruption and general clean up
...
This data corruption problem is very difficult. Just changing the code
a little bit changes whether the problem even happens and what is
affected. I need these changes in the main branch so I can operate with
the extra debug code always available and turned on.
Everything is setup such that if M100 is turned off or DEBUG(ECHO) is
turned off, the code is not affected. M100 has been made a little bit
more inteligent so it can display the serial command buffers in a more
meaningful way (because the data corruption seems to often times end up
in that area).
2017-04-15 19:26:43 -05:00
Scott Lahteine
e519e95953
Merge pull request #6358 from thinkyhead/rc_doubleclick_fix
...
Show Cancel/Continue screen for ABL "Level Bed"
2017-04-15 17:25:37 -05:00
Scott Lahteine
a81606c680
Show Cancel/Continue screen for ABL "Level Bed"
2017-04-15 16:51:03 -05:00
Scott Lahteine
51021bc7b8
Merge pull request #6353 from thinkyhead/rc_endstop_coolness
...
Clean up endstop triggering code
2017-04-15 16:49:54 -05:00
Scott Lahteine
857dec0990
Merge pull request #6342 from benlye/benlye-fix-softspi
...
Fix softspi variant conditional for 1284p
2017-04-15 16:33:50 -05:00
Scott Lahteine
4e04383d18
Merge pull request #6354 from thinkyhead/rc_doubleclick_fix
...
Fix undefined symbol if DOUBLECLICK_FOR_Z_BABYSTEPPING and HAS_BED_PROBE defined
2017-04-15 16:06:29 -05:00
Thomas Moore
8dd0492e68
Show lcd_babystep_zoffset screen if DOUBLECLICK_FOR_Z_BABYSTEPPING is enabled and HAS_BED_PROBE is defined
2017-04-15 14:44:50 -05:00
benlye
0a2f60fab4
Make spi.h inclusion conditional
...
spi.h is only needed if HEATER_0_USES_MAX6675 is defined, so making its inclusion conditional on HEATER_0_USES_MAX6675 being defined.
2017-04-15 16:22:42 +01:00
Bob-the-Kuhn
60471b7592
minor improvements
...
Configuration_store.cpp - changed a couple of print statements so the
values were printed. The old method resulted in the formula being
printed.
ubl_G29
1) added support for R option to P4. Now probes all points unless R is
present and the number is greater than 0.
2) P2 - moved map print statement so it showed the point that was
currently being probed, The old location did this only for the first
point.
3) P4 - Moved the map print for the same reason.
ultralcd.cpp - changed "Mesh Editor :" to "Mesh Editor" because the LCD
draw routine puts a ":" in automatically so you end up with an extra ":"
using the old message.
2017-04-15 09:31:55 -05:00
Scott Lahteine
25a61e9061
Improve motion-based endstop triggering code
2017-04-15 06:16:50 -05:00
Scott Lahteine
a2356c2825
Fix compiler warning about z-offset callback
2017-04-15 02:50:27 -05:00
Scott Lahteine
037c964d26
Reverse bools on prepare_move sub-functions
2017-04-15 01:08:19 -05:00
Scott Lahteine
d9c4333806
Extra logging of Dual X modes
2017-04-15 01:08:19 -05:00
Scott Lahteine
4067d15c92
Cleanup, extend TMC2130 implementation
2017-04-14 23:00:00 -05:00
Scott Lahteine
d60c02c5b1
Cleanup, extend TMC2130 configuration
2017-04-14 22:43:56 -05:00
Scott Lahteine
0e97b3d6d0
Fix some configuration spacing
2017-04-14 22:36:10 -05:00
Scott Lahteine
cf6f483378
Merge pull request #6187 from thinkyhead/rc_flsun_delta_autocal
...
Delta: DELTA_HEIGHT, G33 Auto-Calibrate, drop M206/M428, add M665 H
2017-04-14 22:32:12 -05:00
Scott Lahteine
24882adfbf
Allow NO_WORKSPACE_OFFSETS with DELTA_AUTO_CALIBRATION
...
- On `DELTA` the `M665 H` option supplants `M206`
- On `DELTA` `NO_WORKSPACE_OFFSETS` only reverts `G92` behavior
- Spawn 4 conditionals based on `NO_WORKSPACE_OFFSETS`
- Optimize coordinate space conversion for `DELTA` workspace
- To keep EEPROM version, retain `home_offset[XYZ]`, just ignore XY
2017-04-14 21:56:49 -05:00
Bob-the-Kuhn
1acb84ba02
fix 1 bug, add error messages
...
===============================================
make changes requested by reviewers
===============================================
add M43 test to Travis, fix EOL, remove trailing spaces
2017-04-14 20:57:45 -05:00
LVD-AC
8821963873
Implement delta auto-calibration and delta_height
2017-04-14 19:46:31 -05:00
Scott Lahteine
b305699046
Merge pull request #6341 from benlye/benlye-lcd_babystep_zoffset
...
Fix lcd_babystep_zoffset()
2017-04-14 19:11:46 -05:00
LVD-AC
03bda24d19
Add delta auto-calibration and configuration for Flsun AC
2017-04-14 19:08:14 -05:00
Scott Lahteine
1bd25fd2b3
Clean up config spacing, section headings, etc.
2017-04-14 19:06:31 -05:00
Scott Lahteine
153b0ae967
Tweak Delta Printer configuration note
2017-04-14 19:06:06 -05:00
Scott Lahteine
81ffd98dd9
Allow faux leveling
2017-04-14 19:06:06 -05:00
Scott Lahteine
2355d87e11
Merge pull request #6346 from thinkyhead/rc_broken_abl_test
...
Add support for SOLENOID_PROBE
2017-04-14 18:36:32 -05:00
Scott Lahteine
f4685c28b7
Reorder Conditionals_post.h and add comments
2017-04-14 18:18:21 -05:00
Scott Lahteine
0ac2b5c045
Additional 5 extruders support (solenoids, microstepping)
2017-04-14 18:18:20 -05:00
Scott Lahteine
fd2a0784ba
Add support for SOLENOID_PROBE
2017-04-14 17:24:36 -05:00
Scott Lahteine
5803ba43a9
Expose EXT_SOLENOID as an advanced option
2017-04-14 17:24:36 -05:00
Scott Lahteine
ea734f910b
Use direct pin manipulation whenever possible
2017-04-14 16:55:35 -05:00
Scott Lahteine
19d0c6a0c0
Patch to init W with RGBW_LED
2017-04-14 16:55:23 -05:00
Scott Lahteine
3e079660b0
Never define SLED_PIN
2017-04-14 16:36:32 -05:00
benlye
1a447d0047
Fix variant conditional for 1284p
2017-04-14 18:46:09 +01:00
benlye
1f9ee42750
Fix lcd_babystep_zoffset()
...
Resolve 'steps_to_mm was not declared in this scope' compilation error after recent changes to merge babystepping with M851
2017-04-14 18:38:35 +01:00
Bob-the-Kuhn
445d39e95a
CORExx endstop detection fixes
...
1. The CORExx printers were checking more endstop axis than needed.
2. Removed all the CORE_xx_NOT logic. The motor_direction(xx) routine
always returns the correct data so it is not needed. It was actually
cause the wrong direction to be checked in some cases.
3. Made the logic/defines for X, Y & Z axis all the same. The old logic
checked inappropriate configurations for Y and didn't check all the
correct configurations on Z.
4. Added a check for zero steps before the X, Y & Z axis. Previously
would check the they axis even if there were no movement.
2017-04-13 21:43:37 -05:00
Roxy-3D
28fec61f92
M100 Fixes and Features
...
All the memory accesses need to be unsigned char in order to avoid
false errors being detected. Two new features are available for
developers to call into the M100 functionality to look for data
corruption.
2017-04-13 18:20:53 -05:00
Scott Lahteine
52c3ace102
Add BABYSTEP_ZPROBE_OFFSET as an optional feature
2017-04-13 16:29:43 -05:00
Scott Lahteine
cd4e6abec8
Group BABYSTEPPING options together
2017-04-13 16:26:45 -05:00
Scott Lahteine
60ac41a32c
Add code to handle changes to zprobe_zoffset
2017-04-13 15:46:35 -05:00
Scott Lahteine
8fa4209916
Movement/adjustment should be reverse of probe offset change
2017-04-13 15:46:05 -05:00
Thomas Moore
361655828f
Use babystepping to adjust bed probe z-offset
2017-04-13 15:46:05 -05:00
Scott Lahteine
36e5c7c389
Merge pull request #6330 from thinkyhead/rc_improvements
...
Sanity check per-axis options' array sizes
2017-04-13 13:08:44 -05:00
Scott Lahteine
02fca543bb
Merge pull request #6272 from thinkyhead/rc_adc_variable_rate
...
Make ADC sensor reading frequency adjustable
2017-04-13 12:49:31 -05:00
Scott Lahteine
34308368c0
Sanity check per-axis settings for size
2017-04-13 11:35:20 -05:00
Scott Lahteine
ac96ae89f9
Apply const in Stepper::isr
2017-04-13 06:20:36 -05:00
Scott Lahteine
2fa1e882d0
Merge pull request #6325 from thinkyhead/rc_M20_with_size
...
Simplified M20 with size
2017-04-13 05:06:52 -05:00
Bob-the-Kuhn
1b12fea0fa
simplified M20 with size
2017-04-13 04:56:58 -05:00
Scott Lahteine
4022b971db
Merge pull request #6315 from thinkyhead/rc_unify_M421
...
Unify M421
2017-04-12 19:43:28 -05:00
Scott Lahteine
b236562354
Merge pull request #6306 from thinkyhead/cleanup_after_6302
...
Adjustments to M100
2017-04-12 19:12:27 -05:00
Scott Lahteine
5e4f4d387f
Swap MBL z_values dimensions to [X][Y]
2017-04-12 17:24:05 -05:00
Scott Lahteine
063f641651
Unify M421
2017-04-11 15:46:13 -05:00
Scott Lahteine
6d5400dc31
Merge pull request #6240 from thinkyhead/rebuild_rgb_led
...
Extend RGB LED with Printer Events
2017-04-11 15:16:57 -05:00
Scott Lahteine
dac21ec680
Add support for an RGBW LED
2017-04-11 12:58:55 -05:00
Scott Lahteine
e7746ffee4
Extend RGB LED support, adding Printer Events
2017-04-11 12:15:41 -05:00
Scott Lahteine
c7063eb55c
theTarget => target_temp
2017-04-11 12:15:41 -05:00
Scott Lahteine
36bda2bade
Add HAS_RESUME_CONTINUE shorthand macro
2017-04-11 12:15:40 -05:00
Scott Lahteine
53e6c33c37
2 is DXC_DUPLICATION_MODE
2017-04-11 12:15:40 -05:00
Scott Lahteine
a2cb0a3d54
Use multiply for delta probe constraint
2017-04-11 12:15:40 -05:00
Scott Lahteine
6487c96a4a
Merge pull request #6313 from Kaibob2/patch-10
...
Allow 10mm Movements for Z-Axis
2017-04-11 12:04:10 -05:00
Kai
001bc14255
Allow 10mm Movements for Z-Axis
...
I use the movement options via LCD quite often. Especially to get the nozzle out of the way. I see no reason, why the 10mm option is disabled for the Z-Axis, this is why i always delete this line when i compile a new version.
If this is unwanted, please just close this PR
2017-04-11 18:39:26 +02:00
Scott Lahteine
6a9b008044
Fix MINIMUM_STEPPER_PULSE maths
2017-04-11 11:11:17 -05:00
Scott Lahteine
68773f4486
Simplify stepper macros by renaming enable/disable macros
2017-04-11 11:10:26 -05:00
Scott Lahteine
e02a5a6371
Add macros for delays by machine cycle
2017-04-11 09:18:32 -05:00
Scott Lahteine
ecc537015a
Have M109 / M190 do nothing with no parameters
2017-04-11 05:06:25 -05:00
Scott Lahteine
03aa9a390e
Apply coding standards to M100, break up into functions
2017-04-10 21:09:43 -05:00
Scott Lahteine
48c16fc6ef
Merge pull request #6307 from thinkyhead/rc_less_no_reentrance
...
Only lcd_synchronize needs no_reentry
2017-04-10 20:58:32 -05:00
Scott Lahteine
4fcfe926d6
Only lcd_synchronize needs no_reentry
2017-04-10 20:13:23 -05:00
Scott Lahteine
67fb7f82ac
Merge pull request #6283 from thinkyhead/rc_eeprom_z_fade
...
Save / restore z_fade_height in EEPROM
2017-04-10 20:05:20 -05:00
Scott Lahteine
eff5af569b
Merge pull request #6300 from MagoKimbra/rc_fix_mesh_report
...
Fix mbl_mesh_report
2017-04-10 19:37:19 -05:00
Scott Lahteine
4a18968c10
Merge pull request #6297 from Kaibob2/patch-9
...
Fix EPROM -> EEPROM
2017-04-10 19:35:30 -05:00
Roxy-3D
ba85faabc0
Fix M100 Free Memory Checker
...
M100 had numerious changes and quit working. Part of the problem is
the overloading of the SERIAL_PROTOCOL functions. Also, some of the
address arithmatic was changed to use char *ptr and passing ptr into the
SERIAL_PROTOCOL functions caused them to try to print a string instead
of a number. M100 is working again. Let's keep it that way!
M100 has been expanded to now have a function int
free_memory_is_corrupted() that can be called from other code to see if
the free space is still contiguous. It may make sense to add a flag to
control its verbose nature but right now, the extra chit chat is very
helpful to know int free_memory_is_corrupted() is doing the right thing
and what it found at various points when it was called. A 'Show &
Tell' is coming up with int free_memory_is_corrupted().
2017-04-10 15:33:55 -05:00
Kai
3b82db5fe9
Missing semicolon in ultralcd.cpp
...
When PARK_HEAD_ON_PAUSE is defined Marlin won't compile because of two missing semicolon.
2017-04-10 14:45:51 -05:00
MagoKimbra
7d2e637867
Fix mbl_mesh_report
2017-04-10 20:50:19 +02:00
Kai
afeb0452ef
Fix EPROM -> EEPROM
...
These fixes are neede because before it showed the englisch text even if language = de was selected
2017-04-10 18:37:00 +02:00
Scott Lahteine
7f950a80c0
Make ADC sensor reading frequency adjustable
2017-04-09 22:18:21 -05:00
Scott Lahteine
786af73e24
Convert config code to a static class
2017-04-09 22:06:41 -05:00
james94jeans2
5b9476fe78
Added z_fade_height to EEPROM-Settings
...
Firmware was forgetting the z_fade_height in Planner, set by M420 Z<f>,
after each reset or loading settings from EEPROM. Added the float
z_fade_height to EEPROM-Storage, now remembers the value.
2017-04-09 21:16:58 -05:00
Scott Lahteine
9343f6a95f
Put TOSHIBA with other stepper driver options
2017-04-09 20:52:49 -05:00
Scott Lahteine
7a704af5e6
Merge pull request #6284 from thinkyhead/rc_wt150_rebase
...
wt150 (Mightyboard Rev E) & RRD Full Graphic Smart Controller
2017-04-09 20:27:44 -05:00
Max Matveev
2031fb913b
Fixed comparison of float values to NaN
2017-04-09 20:28:46 +02:00
Scott Lahteine
e48a52a530
Patch a display issue with LCD_DECIMAL_SMALL_XY
...
The `ftostr4sign` function got munged by the `WITHIN` patch
2017-04-09 10:25:35 -05:00
Scott Lahteine
1a3cd6a090
Merge pull request #6213 from thinkyhead/rc_gitattributes
...
Init bed_level_virt_interpolate on EEPROM load
2017-04-09 08:13:11 -05:00
Scott Lahteine
314a02e2d5
Toggle with XOR
2017-04-09 07:58:47 -05:00
Scott Lahteine
8bc0d90b00
Init bed_level_virt_interpolate on EEPROM load
2017-04-09 07:04:20 -05:00
MD
20dd5376b8
Cheaptronic V2
...
Add support for new electronics
www.reprapobchod.cz
2017-04-09 06:57:43 -05:00
Scott Lahteine
4cdda5615b
Bring other configs up to date with wt150 changes
2017-04-09 06:45:42 -05:00
Paweł Stawicki
9b0885f4f6
Allow boards without a thermistor
2017-04-09 06:45:41 -05:00
Paweł Stawicki
64cfcebe66
Update SlowSoftI2CMaster link. MightyBoard digipots I2C bus has no resistors.
2017-04-09 06:45:03 -05:00
Paweł Stawicki
0eb16d9ff7
Add example config for the wt150 printer with RepRapDiscount Full Graphic Smart Controller
2017-04-09 06:44:54 -05:00
Paweł Stawicki
652bedfa18
Add RepRapDiscount Full Graphic Smart Controller support to MIGHTYBOARD REVE
2017-04-09 06:44:53 -05:00
Paweł Stawicki
44cdebb8f1
Add software spi support for max6675
2017-04-09 06:44:53 -05:00
Paweł Stawicki
191fec009f
Add digipot i2c control for MCP4018
2017-04-09 06:44:53 -05:00
Scott Lahteine
e5b16081cb
Update TinyBoy2 configurations
2017-04-09 06:44:53 -05:00
Scott Lahteine
1855534f20
Config files cleanup
2017-04-09 06:44:52 -05:00
Scott Lahteine
c26a315d0b
Additional missed patches
2017-04-09 04:24:23 -05:00
Scott Lahteine
39617e10b8
Patch configs comment formatting
2017-04-09 03:49:16 -05:00
Scott Lahteine
c54f6cf23d
Updates to support 5 extruders
2017-04-09 03:49:16 -05:00
Scott Lahteine
2b88ccd0aa
Apply UBL mesh bounds to remaining configs
2017-04-09 03:49:15 -05:00
Scott Lahteine
60be3d264b
Macros to print floats, hiding imprecision
2017-04-09 03:48:40 -05:00
Scott Lahteine
b356d73239
Merge pull request #6278 from thinkyhead/pr_delta_angles
...
Followup to additional delta trim options
2017-04-08 22:25:57 -05:00
Jimmy Envall
f78d44e91a
Added support for delta tower angle corrections.
2017-04-08 21:13:44 -05:00
Scott Lahteine
d3b4d84586
Merge pull request #6277 from thinkyhead/pr_roxy3d_rcbugfix
...
Unify UBL Command Parsing
2017-04-08 20:17:46 -05:00
Scott Lahteine
d4ce839351
Cleanup following Pins Debug update
2017-04-08 18:59:57 -05:00
Scott Lahteine
c7a8f7970b
Formatting / cleanup
2017-04-08 18:59:57 -05:00
Scott Lahteine
29d4ec8257
Support 5 extruder auto fans
2017-04-08 18:59:57 -05:00
Scott Lahteine
824f3c1c0d
Fix up configuration comments
2017-04-08 18:59:56 -05:00
Scott Lahteine
995ed90248
Clean up Filament Width Sensor comments
2017-04-08 18:59:56 -05:00
Scott Lahteine
5a7b810fdd
General comment cleanup
2017-04-08 18:58:33 -05:00
Scott Lahteine
0027c22839
Drop extraneous calls to lcd_update
2017-04-08 18:58:33 -05:00
Scott Lahteine
d6db7a9b03
patch "step_remaining"
2017-04-08 18:13:20 -05:00
Scott Lahteine
cbc2331187
Use LCD_MESSAGEPGM over lcd_setstatuspgm
2017-04-08 18:04:39 -05:00
Scott Lahteine
3729510b1e
Set and check main parameter values, report all errors
2017-04-08 17:15:55 -05:00
Roxy-3D
34d3ed9ab1
These items were removed from the UBL Command Parsing
...
Having these items randomly (and errorniously) disappear cost me several
hours of work yesterday.
2017-04-08 15:30:20 -05:00
Scott Lahteine
15edb41cee
Patches to UBL
2017-04-08 14:59:14 -05:00
Roxy-3D
14cf527bb8
Getting setup for debugging
2017-04-08 14:59:14 -05:00
Scott Lahteine
f8408036f2
Merge pull request #6264 from thinkyhead/rc_five_extruders
...
Support up to 5 extruders in Marlin
2017-04-07 12:48:56 -05:00
Bob-the-Kuhn
f7fc49c3a3
Finish name change
...
DAC_STEPPER_DFLT wasn't changed to DAC_MOTOR_CURRENT_DEFAULT in all
places on PR #6124
2017-04-07 11:05:24 -05:00
Scott Lahteine
832064e4f2
Implementation changes to support 5 extruders
2017-04-07 10:46:37 -05:00
Scott Lahteine
04050237f0
Header and pins changes to support 5 extruders
2017-04-07 10:46:36 -05:00
Scott Lahteine
2a84122edd
Configuration changes to support 5 extruders
2017-04-07 10:46:35 -05:00
Scott Lahteine
edf18977c1
Patch pins files hotends/e-steppers sanity check
2017-04-07 10:46:33 -05:00
Scott Lahteine
dc84678fc1
Fix HOTEND_STATUS_ITEM for graphical display
2017-04-06 23:07:30 -05:00
Scott Lahteine
a0de5d94e2
Merge pull request #6258 from benlye/benlye-bilinearfix2
...
Better fix for bilinear Z offset and G29 Z (update to #6251 )
2017-04-06 20:51:57 -05:00
Scott Lahteine
b23aef5b8d
Merge pull request #6190 from Bob-the-Kuhn/Stop-and-Kill-prints---round-2
...
Message for every KILL and STOP (also need delays)
2017-04-06 20:40:12 -05:00
Roxy-3D
945303c0d5
eleminate bootscreen.h
2017-04-06 19:55:41 -05:00
Roxy-3D
ef3da3971e
Update ubl.h
2017-04-06 19:55:41 -05:00
Roxy-3D
8644dc170b
get synchronized to current file names
2017-04-06 19:55:41 -05:00
Roxy-3D
1451b7eacf
UBL's Grid Based Leveling code
...
Pretty much... The code is in place. Still more work to do. But it
has a lot of hooks and variables in other code, so commit and merge
before I pick up a million 'Conflicts'.
2017-04-06 19:55:41 -05:00
Bob-the-Kuhn
549055f20c
Merge pull request #6124 from Bob-the-Kuhn/MCP4728-consistency
...
MCP4728 consistency & fix ultralcd.cpp (PRINTRBOARD Rev F and RIGIDBOARD V2)
2017-04-06 16:35:50 -05:00
Bob-the-Kuhn
a77875c9d2
Merge pull request #6114 from Bob-the-Kuhn/try2-add-BLTouch-retry
...
Another BLTouch retry place (replaces PR #6108 )
2017-04-06 16:25:55 -05:00
Bob-the-Kuhn
3b9ff2cb12
Merge pull request #5676 from Bob-the-Kuhn/configuration.h
...
Configuration.h - reword Z PROBE section
2017-04-06 16:18:34 -05:00
Bob-the-Kuhn
6643d553f6
# This is a combination of 2 commits.
...
# This is the 1st commit message:
MCP4728 consistency & fix ultralcd.cpp
The MCP4728 DAC controls the stepper motor current strenth on the
PRINTRBOARD Rev F and RIGIDBOARD V2 boards.
PR #5792 on 9 FEB 2017 implemented default drive percentages but only on
the RIGIDBOARD V2.
This change moves the default settings to Configuration_adv.h.
Also, ultralcd.cpp won't compile because of a type def conflict.
Changed it to match the one in stepper_dac.cpp
===========================================================
reword stepper curent section for clarity
===========================================================
change name & improve comments
===========================================================
changed name from A4JP to SCOOVO_X9H per PR #6139
# This is the commit message #2 :
fix typo
2017-04-06 16:16:27 -05:00
Bob-the-Kuhn
a44b3432c1
add BLTouch retry to a second place & add/update delays
...
=================================================
implement requested changes
=================================================
remove delays (they're in another PR) & move return
2017-04-06 16:13:07 -05:00
Bob-the-Kuhn
a5abc61fb9
Merge pull request #6219 from Bob-the-Kuhn/Servo-probe-and-toggle-pins
...
M43 - add Toggle utility and Z servo utility (replaces PR #5864 )
2017-04-06 16:10:50 -05:00
Bob-the-Kuhn
3b8926bd09
improved wording, consolidation of info, BLTouch warning
...
==============================================
clarified BLTouch calculation & changed comment delimitters/flags
I found it hard to pickout the various sections in this area so I
changed most comments from // style to /** ... */
Made the BLTouch calculation simpler and clarified the units of measure
for the result.
============================================
add changes to example configurations
============================================
add TinyBoy2 to this PR & add BLTouch Delay
2017-04-06 16:06:01 -05:00
Scott Lahteine
55d296aaf0
pinsDebug with more features, uses less RAM
...
I've just uploaded a major change to pinsDebug.
The big change was creating an array in FLASH that contained every
active pin definition. That reduced the RAM memory usage considerably
but increased the FLASH usage.
Creating the array requires going through the pin list twice. Rather
than having two copies of it in the code I moved the list out to another
file (pinsDebug_list.h) and then just did two #includes.
From the user’s view they’ll see the following changes:
1. Now reports all the names assigned to a pin
2. The port is now reported in addition to the pin number.
3. When PWM0A & PWM1C share a pin, both PWMs are reported
4. More PWM/Timer info is reported
One new item that may cause some concern is the usage of the LINE
predefined preprocessor macro. It may not be available if the Arduino
IDE goes to a different compiler.
Includes support for 1284 & 1286 families.
Memory usage changes when enabling PINS_DEBUGGING:
ATmega2560
FLASH
. without 52576
. with new 64592
. with old 62826
. new-out 12016
. old-out 10250
. new-old 1766
.
RAM
. without 2807
. with new 2875
. with old 3545
. new-out 68
. old-out 738
. new-old -670
==================================================================
minor changes - mostly formatting
1) added newline to end of teensyduino file
2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings
about redefining TEENSYDUINO
3) removed some trailing spaces
reduce PROGMEM size & update pin list
Reduced PROGMEM usage by
1) converting often used macro to a function
2) moved as much as possible into the function
This required creating two arrays of address pointers for the PWM
registers.
==================================================================
update with new M3, M4, M5 pin names
==================================================================
report I/O status for unused/unknown pins
2017-04-06 16:06:01 -05:00
Scott Lahteine
e116723b8b
Adjust indentation in ubl.h
2017-04-06 16:06:00 -05:00
Scott Lahteine
1b3a26f2f5
Rename all UBL files with a ubl_ prefix
2017-04-06 16:06:00 -05:00
Scott Lahteine
d13991ae18
Use same config name for all mesh dimensions
2017-04-06 16:05:59 -05:00
Bob-the-Kuhn
f9686a108c
add Z servo test and toggle pins to M43
2017-04-06 15:59:38 -05:00
Scott Lahteine
62cbaa302e
Z_DUAL_ENDSTOP - make offset a configuration item
...
The offset for Z_DUAL_ENDSTOP (z_endstop_adj) is already in Marlin.
This PR just makes it a configuration item.
z_endstop_adj is initialized in two places so both had to be modified.
2017-04-06 15:57:10 -05:00
Scott Lahteine
c9e35004e7
pinsDebug with more features, uses less RAM
...
I've just uploaded a major change to pinsDebug.
The big change was creating an array in FLASH that contained every
active pin definition. That reduced the RAM memory usage considerably
but increased the FLASH usage.
Creating the array requires going through the pin list twice. Rather
than having two copies of it in the code I moved the list out to another
file (pinsDebug_list.h) and then just did two #includes.
From the user’s view they’ll see the following changes:
1. Now reports all the names assigned to a pin
2. The port is now reported in addition to the pin number.
3. When PWM0A & PWM1C share a pin, both PWMs are reported
4. More PWM/Timer info is reported
One new item that may cause some concern is the usage of the LINE
predefined preprocessor macro. It may not be available if the Arduino
IDE goes to a different compiler.
Includes support for 1284 & 1286 families.
Memory usage changes when enabling PINS_DEBUGGING:
ATmega2560
FLASH
. without 52576
. with new 64592
. with old 62826
. new-out 12016
. old-out 10250
. new-old 1766
.
RAM
. without 2807
. with new 2875
. with old 3545
. new-out 68
. old-out 738
. new-old -670
==================================================================
minor changes - mostly formatting
1) added newline to end of teensyduino file
2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings
about redefining TEENSYDUINO
3) removed some trailing spaces
reduce PROGMEM size & update pin list
Reduced PROGMEM usage by
1) converting often used macro to a function
2) moved as much as possible into the function
This required creating two arrays of address pointers for the PWM
registers.
==================================================================
update with new M3, M4, M5 pin names
==================================================================
report I/O status for unused/unknown pins
2017-04-06 14:46:28 -05:00
Scott Lahteine
4abd53f65a
Adjust indentation in ubl.h
2017-04-06 05:36:16 -05:00
Scott Lahteine
f5c5c1f771
Rename all UBL files with a ubl_ prefix
2017-04-06 05:33:27 -05:00
benlye
f1d50ac1dc
Fixing bilinear Z offset and G29 Z
...
The fix in #6251 for bilinear Z offset was flawed and broke the Z parameter of G29 for bilinear levelling. This is reverted and a different fix is used for the double-addition of the Z-probe offset to the bilinear correction grid.
2017-04-06 07:41:46 +01:00
Scott Lahteine
eb1e6aa29b
Use same config name for all mesh dimensions
2017-04-06 00:42:52 -05:00
Scott Lahteine
c961dd084d
Add hidden option to output Bilinear grids in JSON
2017-04-05 23:43:17 -05:00
Scott Lahteine
df7b4252fd
Reduce M420 code for UBL slightly
2017-04-05 22:30:29 -05:00
Scott Lahteine
8866158d03
Add LEVELING_DATA as a capability
2017-04-05 22:30:28 -05:00
benlye
0a2b4f3486
Fix bilinear levelling z offset
...
Since run_probe was altered to return the probe Z position rather than the nozzle Z position bilinear levelling has been broken because the Z-offset has been applied twice - once in the run_probe function, and then again in the G29 code for bilinear levelling.
2017-04-05 22:01:40 -05:00
Scott Lahteine
44a849bdce
Fix broken M206/M428/G92 offsets
2017-04-05 22:01:37 -05:00
Roxy-3D
52978e5ba5
Fix spelling mistake when UBL's mesh is Inactive
2017-04-02 20:07:09 -05:00
Roxy-3D
0423e93c42
Fix M421 AUTO_BED_LEVELING_BILINEAR and AUTO_BED_LEVELING_UBL
...
M421 was not connected up for AUTO_BED_LEVELING_BILINEAR.
M421 needed to migrate mesh data to new UBL EEPROM layout.
2017-04-02 16:46:37 -05:00
Scott Lahteine
3412950abc
Merge pull request #6209 from thinkyhead/rc_psu_zero
...
Power Supply 0 as "General"
2017-04-02 16:44:42 -05:00
Roxy-3D
3e9e94801f
Fix problem described in issue # 6175
...
As it turns out... an unsigned int can not go to less than 0, so the
loop never terminates.
2017-04-02 13:00:27 -05:00
Scott Lahteine
289e3d6844
Merge pull request #6215 from thinkyhead/rc_bed_false_alarm
...
Fix thermal runaway when nonexistent bed temp is set
2017-04-02 11:59:58 -05:00
Scott Lahteine
948728e63b
Fix line-endings in UBL_G29
2017-04-02 11:48:26 -05:00
Scott Lahteine
699310d1d2
Fix: Thermal runaway if nonexistent bed's temp is set
2017-04-02 11:48:10 -05:00
Scott Lahteine
c56eec29f0
Configurable delay for BLTouch servo emulation
2017-04-02 11:14:53 -05:00
Scott Lahteine
deaad78df9
Merge pull request #5678 from Bob-the-Kuhn/G38-optional-double-tap
...
G38 bug fix, made double touch optional & reverted to Z_MIN_PROBE
2017-04-02 10:32:04 -05:00
Scott Lahteine
5bce731962
Fix LCD preheat menus
2017-04-02 09:32:22 -05:00
Scott Lahteine
4c72167af3
Prevent a warning on echo_command
2017-04-02 08:36:58 -05:00
Scott Lahteine
9b5fd9522e
Fix formatting, order for a UBL change
2017-04-02 07:15:40 -05:00
Tannoo
54173c80ad
Power Supply 0 as "General"
2017-04-02 06:21:34 -05:00
Scott Lahteine
a2775d0c70
can wstring be removed?
2017-04-02 04:43:33 -05:00
Scott Lahteine
de4e19f17e
Patch MarlinSerial to match up with 32-bit version
2017-04-02 04:39:18 -05:00
Scott Lahteine
2cbc7b4b73
Relocate serial macros and functions
2017-04-02 01:05:25 -05:00
Scott Lahteine
eaa66f3c46
Indent MarlinSerial code
2017-04-02 01:05:25 -05:00
Scott Lahteine
7a7a80e6c5
status_printf => lcd_status_printf_P
2017-04-02 01:05:25 -05:00
Scott Lahteine
0e6ec34228
Use PSTR versions of lcd_status... to save SRAM
2017-04-02 00:45:39 -05:00
Scott Lahteine
34e2420b9b
Apply const args, clean up find_closest_circle_to_print
2017-04-01 23:15:41 -05:00
Scott Lahteine
e19fbd27ce
Minor spelling patch
2017-04-01 23:08:00 -05:00
Scott Lahteine
790a3e9a8c
Remove extraneous check of UBL_G26_MESH_EDITING
2017-04-01 23:03:40 -05:00
Scott Lahteine
7310110ec0
Fix logic of UBL::fade_scaling_factor_for_z
2017-04-01 22:52:48 -05:00
Scott Lahteine
1a775cecac
Revert behavior of enqueue_and_echo_commands_P
2017-04-01 21:53:46 -05:00
Scott Lahteine
79d42d87c1
Syntax cleanup
2017-04-01 21:53:46 -05:00
Scott Lahteine
b47fd31c37
Revert some changes to UBL
2017-04-01 21:53:45 -05:00
Bob-the-Kuhn
185337e787
add delays to allow stop & kill messages to get out
2017-04-01 00:23:14 -05:00
Scott Lahteine
63abb65146
Update description of PINS_DEBUGGING
2017-03-31 18:57:48 -05:00
Scott Lahteine
73e193da1d
Implement LCD_BED_LEVELING for PROBE_MANUALLY
2017-03-31 11:50:18 -05:00
Scott Lahteine
fcadc7bb1a
Implement the "manual" option for ABL
2017-03-31 11:50:18 -05:00
Scott Lahteine
9e22184936
Add a "manual" option for ABL
2017-03-31 11:50:18 -05:00
Scott Lahteine
541165e878
Merge pull request #6181 from thinkyhead/rc_ubl_further_fixes
...
Further adjustments to UBL code
2017-03-31 11:35:02 -05:00
Scott Lahteine
b19a15fa7f
Within applied to UBL
2017-03-31 11:12:57 -05:00
Scott Lahteine
342ee458ae
Additional UBL fixes, optimizations
2017-03-31 11:12:57 -05:00
Scott Lahteine
a5e085cbea
Have run_probe() return probe Z, not nozzle Z
2017-03-31 09:27:49 -05:00
Scott Lahteine
4487d22d56
Apply FIXFLOAT macro
2017-03-31 09:27:48 -05:00
Scott Lahteine
6cac0f43eb
MBL fiddle
2017-03-31 09:27:48 -05:00
Scott Lahteine
25a6bfa7ed
Add and apply WITHIN macro
2017-03-31 09:27:48 -05:00
Scott Lahteine
81136c1e82
Merge pull request #6177 from thinkyhead/rc_tinyboy
...
Support for TinyBoy 2 3D printer (and its OLED display)
2017-03-31 04:31:47 -05:00
Scott Lahteine
93aad54dc1
Clean up code, remove _now command function
2017-03-31 04:17:31 -05:00
Stefan Brüns
6ba6c92a81
Add example configuration for TinyBoy L10/L16
...
The TB2 is a Indiegogo funded 3d printer. It uses a MKS SMELZI V1.0
main board (based on MELZI, i.e. Sanguinololu). I comes as a complete kit,
including display and panel.
Two variants exists, L10 and L16, with a height of 100 and 160 mm.
The heating function of the provided bed can enabled by soldering a
thermistor and some wires to it.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-31 04:05:35 -05:00
Stefan Brüns
0fe57ad4f5
Add Support TinyBoy2 OLED/Encoder panel
...
The OLED is driven by an SSD1306, connected to the board via
I2C, the rotary encoder is connected to 3 GPIO pins.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-31 04:05:34 -05:00
Scott Lahteine
65ca6472ba
Make G26 compatible with G92 and M206
2017-03-31 02:20:20 -05:00
Scott Lahteine
4902fd4e95
More data in UBL class, make it a static class
...
- Make all `unified_bed_leveling` data/methods static
- Move some UBL-related variables into the class
- Replace `map_[xy]_index_to_bed_location` with `mesh_index_to_[xy]pos`
2017-03-31 02:20:20 -05:00
Scott Lahteine
edbc024d76
Disable UBL_G26_MESH_EDITING by default
2017-03-31 02:20:20 -05:00
Scott Lahteine
9e4bd6b3b5
Further repairs to UBL, comments, spacing
2017-03-31 02:20:20 -05:00
Bob-the-Kuhn
f3618c3337
Reduce UBL RAM usage by making G26/G29 optional
2017-03-31 02:20:19 -05:00
Scott Lahteine
c9eb1d6ab7
Make MBL a static class, use lookup for index-to-point conversion
2017-03-31 01:28:07 -05:00
Scott Lahteine
de9d2cddc3
Merge pull request #6152 from thinkyhead/rc_cleanup_6150_etc
...
UBL cleanup, optimization
2017-03-30 17:40:29 -05:00
Scott Lahteine
9217e4b8ec
Various UBL cleanups and bug fixes
2017-03-30 17:09:49 -05:00
Scott Lahteine
9924199802
Merge pull request #5908 from thinkyhead/rc_fix_slowdown
...
General minor cleanup
2017-03-29 21:43:33 -05:00
Scott Lahteine
0e71e7b2fb
Cleanup to planner.cpp
2017-03-29 06:48:07 -05:00
Scott Lahteine
f105cad43c
Marlin: Slight cleanup to Marlin_main.cpp
2017-03-29 06:40:29 -05:00
Scott Lahteine
499f9e04e1
Marlin: Temperature soft-PWM cleanup
2017-03-29 06:37:27 -05:00
Scott Lahteine
7ddd94dc61
Merge pull request #5994 from StefanBruens/fix_Makefile_errors
...
Fix makefile errors, cleanup
2017-03-29 06:32:08 -05:00
Scott Lahteine
af09095f03
Merge pull request #6154 from thinkyhead/rc_fil_sensor_vs_sd
...
Show Filament Width on LCD when SD is disabled
2017-03-29 05:24:48 -05:00
Remo Kallio
d38b1bc4b1
Show filament width sensor values in LCD constantly if SD card support is not enabled.
2017-03-29 04:03:08 -05:00
Scott Lahteine
e3459ec178
Merge pull request #5989 from MagoKimbra/rc_fix_delta_angles
...
Fix delta_angles
2017-03-29 03:35:18 -05:00
Scott Lahteine
f49aec057f
Tweak "can not" => "can't" in RUMBA pins
2017-03-29 01:04:50 -05:00
Scott Lahteine
0a23a1bb3b
Dynamic feedrate on SCARA, converting target mm/s to deg/s
2017-03-28 17:21:07 -05:00
Roxy-3D
d8724bb546
Get G29's P1 (Automated Probing) working again.
...
Incorrect optimizations of data types and ternary operators caused some
issues.
2017-03-28 17:11:02 -05:00
Scott Lahteine
c7f6ee9c93
Board A4JP should be SCOOVO_X9H
2017-03-27 22:22:13 -05:00
Scott Lahteine
a9fc30ae2e
Use safe_delay to ensure watchdog reset
2017-03-26 23:49:56 -05:00
Roxy-3D
171904b6c7
Make G29 What command print reliably and fix G29 P1 bug Waldo found
2017-03-26 17:05:58 -05:00
Roxy-3D
9d3ac66f73
Map clean up of UBL
...
UBL's maps are cleaner. And with a 1 value, G29 O 1 will generate a
map suitable to be Cut & Pasted into Excel so a Suface Map can be
generated.
2017-03-25 18:55:05 -05:00
Roxy-3D
9a1949a91e
Cleaned up G26 ready to replace existing one at MarlinFirmware/Marlin
2017-03-25 10:15:40 -05:00
Roxy-3D
aec85ad45a
Start of process to get UBL running again.
...
The wait_for_user change totally broke UBL. But there is stuff wrong
now in the thermal code and/or LCD Panel code.
2017-03-24 18:38:27 -05:00
Scott Lahteine
b47eaf14ae
Merge pull request #6109 from thinkyhead/rc_soft_pwm_dither
...
PWM dithering followup
2017-03-24 18:21:07 -05:00
Scott Lahteine
34d1c41b5f
Merge pull request #6111 from benlye/benlye-patch-echo_command
...
Fix type conversion issue with echo_command
2017-03-24 17:57:28 -05:00
benlye
6a601aca35
Fix type conversion issue with echo_command
...
With the the current definition of echo_command I cannot compile RCBugFix (Arduino IDE 1.8.1) with the error "invalid conversion from 'const char*' to 'char*'". This change resolves that.
2017-03-24 17:23:02 +00:00
Scott Lahteine
009a6ddd39
Adjust bilinear grid in M851
2017-03-24 06:28:59 -05:00
Scott Lahteine
eab7854a73
Merge pull request #6074 from thinkyhead/rc_immediate_shove
...
Immediate commands take precedence
2017-03-24 05:52:27 -05:00
Stefan Brüns
5699e2b881
Add SOFT_PWM_DITHER to other configurations
2017-03-24 05:02:24 -05:00
Scott Lahteine
5a2abeca78
Merge pull request #6100 from thinkyhead/rc_soft_pwm_dither
...
Enhancement of PWM, with dithering
2017-03-24 04:57:40 -05:00
Scott Lahteine
043be2856b
Use "& 0x3F" instead of "% 64"
2017-03-24 04:13:50 -05:00
Stefan Brüns
6a040a6967
SOFT_PWM: Do not switch off heaters twice on pwm_count wraparound
...
After wraparound, pwm_count <= pwm_mask holds, thus soft_pwm_X <= pwm_count
guarantees soft_pwm_X < pwm_mask is true, and the heater will be switched
off in the first branch.
Do not evaluate the pwm conditions a second time, this reduces the
instruction count (4 instructions per PWM) and text size (6 byte).
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-24 04:13:50 -05:00
Stefan Brüns
0a74774af1
soft_pwm: avoid useless refetches of pwm_count
...
The compiler is not able to reuse the value of pwm_count, but reloads it
on every evaluation, if is stored in a static variable, as it cannot prove
it will be unchanged. A variable with local scope may not be modified from
the outside, so its value can be reused.
Doing so reduces text size and instruction count.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-24 04:13:50 -05:00
Stefan Brüns
35a55d5757
SOFT_PWM: Implement dithering if SOFT_PWM_SCALE is 1 or more
...
If dithering is enabled, the remainder of the soft_pwm_X duty value at
turnoff time is added to the next cycle. If e.g. the duty is set to 9 and
SCALE is set to 2, the PWM will be active for 8 counts for 3 cycles and
12 counts on each fourth cycle, i.e. the average is 9 cycles.
This compensates the resolution loss at higher scales and allows running
fans with SOFT_PWM with significantly reduced noise.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-24 04:13:36 -05:00
Stefan Brüns
2aed66a955
temperature: Fix SOFT_PWM off by one
...
A 128 step PWM has 127 intervals (0/127 ... 127/127 duty). Currently, a
PWM setting of 1/127 is active for 2/128, i.e. double the expected time,
or, in general n+1/128 instead of n/127.
Fixes issue#6003.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-24 04:13:36 -05:00
Scott Lahteine
b5711a99a2
Patches to bring UBL closer to compliance
2017-03-24 01:37:52 -05:00
Scott Lahteine
d076c1b604
Apply some general cleanup to code
2017-03-24 01:37:51 -05:00
Scott Lahteine
d1e6b0e21a
Reduce STEP_PULSE_CYCLES code slightly
2017-03-24 00:50:05 -05:00
Scott Lahteine
783338a0b8
Add UBL_MESH_EDIT_ENABLED to configs
2017-03-24 00:44:55 -05:00
Scott Lahteine
8d54ffbf05
Adjust vector_3 code with const, some optimization
2017-03-23 19:41:42 -05:00
Roxy-3D
8ee2612ebb
The hex nibble routine can print again!
...
The code to print a hex nibble got broke. SERIAL_ECHO( (char) ) isn't
suitable for its use.
2017-03-23 16:08:37 -05:00
Roxy-3D
b8e4a6970b
Get UBL up and running again
...
All the changes to get the code into compliance with Marlin coding
standards made UBL sick. This pretty much gets UBL back up and
running.
2017-03-23 16:08:37 -05:00
Roxy-3D
5de1da2b3c
Make UBL honor the #define ENABLE_LEVELING_FADE_HEIGHT option
2017-03-23 16:08:37 -05:00
Scott Lahteine
8f9face956
Merge pull request #6088 from rafaljot/patch-3
...
Update Marlin_main.cpp
2017-03-23 01:51:51 -05:00
Scott Lahteine
782634b6c9
Merge pull request #6081 from Sebastianv650/MIN_STEPPER_PULSE_for_Babystepping
...
Add MINIMUM_STEPPER_PULSE ability to babystepping
2017-03-22 21:57:36 -05:00
Scott Lahteine
af2ea23e9c
EXTRUDER_RUNOUT_PREVENT uses buffer_line_kinematic
2017-03-22 20:51:12 -05:00
Scott Lahteine
cd882b88db
#if defined => #ifdef / PIN_EXISTS
2017-03-22 20:51:11 -05:00
Scott Lahteine
e244399766
Additional cleanup of UBL code
2017-03-22 20:51:10 -05:00
Bob-the-Kuhn
0934563b97
G38 optional double touch
...
Made the double touch portion a conditional compile based on the
PROBE_DOUBLE_TOUCH flag.
==============================================
Bugfix
The current G38 only stopped a move if it involved the Z axis.
Moved all the G38 code to it's own section and put it where it would
always be executed no matter what axis was moving or if the endstop was
enabled.
Also added a comment to configuration_adv to alert the user the double
tap had to be turned on.
==============================================
Change G38 back to using Z_MIN_PROBE
There's no Z_MIN endstop if Z_DUAL_ENDSTOPS is enabled and you have them
set to the top of the gantry.
G38 started out as using the Z_MIN_PROBE pin. I don't remember why we
changed it to the Z_MIN endstop.
2017-03-22 15:08:49 -05:00
Scott Lahteine
cc3204509c
UBL patch from Bob-the-Kuhn
2017-03-22 07:54:20 -05:00
Scott Lahteine
b904b5ae8d
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
Sebastianv650
bf57eb2447
Protect Babystepping against other ISRs
...
Especialy against stepper ISR.
This is even more important when a minimum pulse width is set,
increasing the runtime of a babystep.
2017-03-21 18:05:44 +01:00
Sebastianv650
80830919dc
Add MINIMUM_STEPPER_PULSE ability to babystepping
2017-03-21 17:50:38 +01:00
rafaljot
6da949bbf0
Update Marlin_main.cpp
...
Sometimes after killing heaters are still on.
2017-03-21 15:06:01 +01:00
Roxy-3D
72f7b14e66
Make G29's Interactive Mesh Editor Work
2017-03-20 12:52:51 -05:00
Roxy-3D
3fd74b121f
Get G29's Interactive Mesh Editor running
...
G29 P4 R O should work now.
2017-03-20 12:52:51 -05:00
Roxy-3D
1d58558bec
Spelling fix
2017-03-20 12:52:51 -05:00
Scott Lahteine
2573f4dd05
Merge pull request #6052 from thinkyhead/rc_lift_on_pause
...
Add PARK_HEAD_ON_PAUSE feature / M125
2017-03-20 03:36:31 -05:00
Scott Lahteine
48c6284c91
Immediate commands take precedence
2017-03-19 21:50:48 -05:00
Roxy-3D
76c270fdf2
Allow FWRETRACT with UBL Enabled
...
The retraction flag in UBL's G26 was conflicting with the FWRETRACT option.
All fixed!
2017-03-19 15:43:12 -06:00
Roxy-3D
c377c59d47
Allow G29 P1 R to generate the mesh
...
Fix the logic change that happened when UBL got merged.
2017-03-19 15:13:33 -06:00
Scott Lahteine
ff0dd162b7
PARK_HEAD_ON_PAUSE implementation
2017-03-19 07:27:35 -05:00
Scott Lahteine
26473cab6d
Add PARK_HEAD_ON_PAUSE feature
2017-03-19 05:06:55 -05:00
Scott Lahteine
4cf51157b3
Use XYZE rather than NUM_AXIS
2017-03-19 01:14:39 -05:00
Scott Lahteine
4c7f14752a
Add disable_e_steppers function
2017-03-19 01:14:39 -05:00
Scott Lahteine
8eb29f91e6
Patch filament change options and beep code
2017-03-19 01:14:39 -05:00
Scott Lahteine
56c9dfc83b
Merge pull request #6066 from thinkyhead/rc_felix_fix
...
Update Felix config for UBL
2017-03-19 01:11:02 -05:00
Scott Lahteine
9b2b53f63a
Merge pull request #6042 from thinkyhead/rc_fix_toolchange_z
...
Move Z last in tool-change for SWITCHING_EXTRUDER
2017-03-19 00:34:41 -05:00
Scott Lahteine
f98fb6b38e
Update Felix config for UBL
2017-03-19 00:28:48 -05:00
Scott Lahteine
7cabe81373
Merge pull request #6057 from thinkyhead/rc_followup_6054
...
Followup 6054 with some cleanup
2017-03-18 13:49:20 -05:00
Scott Lahteine
4bca27ab89
Fix Kelvin conversion
...
Thanks to @ospalh -- #6056
2017-03-18 13:23:08 -05:00
Scott Lahteine
143ab8f329
Remove Roxy's personal configurations
2017-03-18 12:35:02 -05:00
Scott Lahteine
2512871a36
Patch configs UBL followup
2017-03-18 12:32:03 -05:00
Scott Lahteine
27b5666e15
Move Allen Key probe definition to the top
2017-03-18 12:27:37 -05:00
Scott Lahteine
77cf648ed3
Move menu selection past static items in 1 screen
2017-03-18 12:26:21 -05:00
Scott Lahteine
2c630a1b5c
Merge pull request #6054 from thinkyhead/rc_ubl_renewal
...
UBL for RCBugFix — cleanup, rebase, patch
2017-03-18 12:07:57 -05:00
Scott Lahteine
0492a3a8f1
Merge pull request #6027 from Bob-the-Kuhn/add_kill_info
...
Message for every KILL and STOP
2017-03-18 11:49:35 -05:00
Scott Lahteine
6618346148
Patches to work around "register spill" compiler bug
2017-03-18 11:35:21 -05:00
Scott Lahteine
be7dd90382
Add Thermistor 75: MGB18 silicon pad
2017-03-18 11:35:20 -05:00
Scott Lahteine
b0a9c82c31
Fix single-char echo and pinMode usage
2017-03-18 11:35:20 -05:00
Scott Lahteine
fb60aa3736
UBL implementation
2017-03-18 11:35:20 -05:00
Scott Lahteine
238b8fd2a3
UBL core and support files
2017-03-18 11:35:19 -05:00
Scott Lahteine
cf94688925
Univeral Bed Leveling - configuration
2017-03-18 11:35:19 -05:00
Scott Lahteine
03aa424ccb
Merge pull request #6053 from thinkyhead/rc_clean
...
Remove extraneous whitespace
2017-03-18 03:26:45 -05:00
Scott Lahteine
af644871bf
Merge pull request #6045 from thinkyhead/rc_remove_raw_kinematics
...
Remove delta optimization concepts… for now
2017-03-18 03:26:24 -05:00
Scott Lahteine
77491dd924
Remove extraneous whitespace
2017-03-18 03:17:39 -05:00
Scott Lahteine
b865b21d32
Can't use Z fade height with DELTA
2017-03-17 08:34:47 -05:00
Scott Lahteine
1e57b0c269
Remove delta interpolation concept
2017-03-17 06:32:11 -05:00
Scott Lahteine
e46898f8e5
Remove kinematic optimizations
2017-03-17 06:30:22 -05:00
Scott Lahteine
11f1fdfab4
_lcd_level_bed_position => manual_probe_index
2017-03-17 06:05:17 -05:00
Scott Lahteine
0e410c9dfd
Software endstop options as simple switches
2017-03-17 06:05:17 -05:00
Scott Lahteine
d01b915085
Implement soft_endstops_enabled for clamping
2017-03-17 06:05:17 -05:00
Scott Lahteine
e4649c9044
Add HAS_SOFTWARE_ENDSTOPS macro
2017-03-17 06:05:17 -05:00
Scott Lahteine
3e927ff204
Replace MBL Z hacking
2017-03-17 06:05:17 -05:00
Scott Lahteine
4e53124681
Merge pull request #6039 from Bob-the-Kuhn/M114-sync-with-stepper
...
M114 - wait for move completion before reporting position
2017-03-17 05:22:46 -05:00
Scott Lahteine
734f9ea133
Merge pull request #6040 from thinkyhead/rc_sanity_use_assert
...
Simplify some sanity checks with static_assert
2017-03-17 05:22:17 -05:00
Scott Lahteine
f02af83d42
Remove some extraneous spaces
2017-03-16 23:59:11 -05:00
Scott Lahteine
672e45652e
Improved solution to tool-change bug
2017-03-16 23:59:10 -05:00
Scott Lahteine
23f1cfb46f
Fix stuck CHDK pin as suggested in #6041
2017-03-16 21:49:39 -05:00
Scott Lahteine
0b22069e82
Merge pull request #6021 from Bob-the-Kuhn/BUG-FIX--Switching-extruder-tool-change-Z-height
...
Bug Fix: Switching extruder tool change leaves Z in wrong position
2017-03-16 21:15:20 -05:00
Scott Lahteine
e7e4500629
Simplify some sanity checks with static_assert
2017-03-16 16:31:34 -05:00
Bob-the-Kuhn
34ff0c3439
M114 - wait for move completion before reporting position
2017-03-16 15:10:45 -05:00
Bob-the-Kuhn
b31604a492
Message for every KILL and STOP
...
No more mystery halts & resets
Moved messages to language.h
Added current command to inactive timeout message
2017-03-15 21:05:11 -05:00
