Scott Lahteine
99ecdf59af
Smarter MIN, MAX, ABS macros
...
Use macros that explicitly avoid double-evaluation and can be used for any datatype, replacing `min`, `max`, `abs`, `fabs`, `labs`, and `FABS`.
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-05-13 04:52:56 -05:00
Scott Lahteine
083ec9963e
Tweaks to heater / lcd conditions
2018-05-13 04:52:56 -05:00
etagle
9d98a62699
Followup to HAL optimizations and delays
...
- Cleanups, fixes for Due HAL code.
- TC_IER is write-only. Use TC_IMR to test ISR state.
2018-05-13 00:46:23 -05:00
Scott Lahteine
8f8c6a9bc4
Move get_axis_position_mm to Planner ( #10718 )
2018-05-12 09:59:11 -05:00
Scott Lahteine
a1062eec5b
Better handling of DELAY_NS and DELAY_US ( #10716 )
...
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-05-12 08:34:04 -05:00
Scott Lahteine
f5aaa2d6c0
Fix some compiler warnings
2018-05-12 05:28:12 -05:00
Scott Lahteine
3614e6ce0f
Fix Switching Extruder with Linear Advance
2018-05-12 02:26:14 -05:00
Scott Lahteine
625035a9ce
Fix M301 access to lpq_len ( #10714 )
...
Co-Authored-By: Zwaubel
2018-05-12 02:13:40 -05:00
etagle
1b225a2809
DUE: Emergency parser for the USB CDC
2018-05-12 02:12:11 -05:00
Scott Lahteine
306f0f2135
Move Stepper::synchronize to Planner ( #10713 )
...
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-05-12 01:38:02 -05:00
Scott Lahteine
f2e3c9896e
Fix compile warnings in backtrace
...
Part of #10688
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-05-11 23:38:29 -05:00
Scott Lahteine
acacee80a2
Add JUNCTION_ACCELERATION_FACTOR to configs
...
Part of #10688
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-05-11 23:13:27 -05:00
Giuliano
d99f1b2245
[2.0.x] EEPROM code cleanup ( #10710 )
2018-05-11 18:06:04 -05:00
ManuelMcLure
8679f671ed
Remove dependency on PI. ( #10701 )
2018-05-11 17:55:56 -05:00
Scott Lahteine
6671c064cd
Use arc moves for G26 if enabled ( #10696 )
...
Co-Authored-By: ManuelMcLure <manuelmclure@users.noreply.github.com>
2018-05-11 02:15:14 -05:00
Scott Lahteine
325bbbc8c2
[2.0.x] Enable AD595 and AD8495 in concert ( #10693 )
...
* Allow both AD595 and AD8495 in concert
* General temperature code tweaks
2018-05-11 01:01:51 -05:00
Scott Lahteine
c43235dd39
Remove non-special comments
2018-05-11 00:36:04 -05:00
ManuelMcLure
613a3be167
Remove hidden dependencies on destination. Fixes #10686 . ( #10691 )
2018-05-11 00:30:51 -05:00
Scott Lahteine
23a876b08d
Update a comment in motion.cpp
2018-05-10 15:03:37 -05:00
Scott Lahteine
439e0cdd0f
Patch up reverse_pass_kernel (and other planner code) ( #10674 )
2018-05-10 01:30:55 -05:00
Scott Lahteine
fe5c308872
Correction to Printrboard SDSS pin ( #10677 )
...
Co-Authored-By: Simon Swenson <simon-swenson-8351@users.noreply.github.com>
2018-05-10 01:28:55 -05:00
Scott Lahteine
265161ba30
Blink the value for unhomed/unknown axes ( #10670 )
2018-05-10 01:19:20 -05:00
Scott Lahteine
57c2f8d2f6
Trailing whitespace cleanup
2018-05-10 00:17:10 -05:00
Scott Lahteine
b76344c080
More Trinamic cleanup
2018-05-10 00:12:10 -05:00
Scott Lahteine
473c6d3a91
Drop extra RIGIDBOT_PANEL from D6 config
2018-05-09 18:02:07 -05:00
Giuliano
44f3a6dc3b
[2.0.x] Add missing axes to M911, M912 ( #10668 )
2018-05-09 17:58:11 -05:00
Scott Lahteine
722aba77f3
Fix LIN_ADVANCE + SWITCHING_EXTRUDER stepper directions ( #10656 )
2018-05-09 14:36:09 -05:00
Scott Lahteine
a225d2e99e
Fix compilation with UBL and Arc/Bézier
...
Fix #10660
2018-05-09 00:40:37 -05:00
Scott Lahteine
6d9ec1852a
Fix compilation of say_units
...
Fixes #10663
2018-05-09 00:30:29 -05:00
Scott Lahteine
19f189b4e5
Add UBL support for G2/G3 and G5 ( #10648 )
2018-05-08 11:10:45 -05:00
Scott Lahteine
4c663b0216
Add JUNCTION_DEVIATION to example configs
2018-05-08 10:08:54 -05:00
Scott Lahteine
4d4bf7897d
Junction Deviation jerk limiting option
2018-05-08 10:08:54 -05:00
Scott Lahteine
0436e16fb2
Apply shorthand Assembler macros
2018-05-08 10:08:54 -05:00
Scott Lahteine
d1b619be52
Standardize some hexadecimals
2018-05-08 09:19:18 -05:00
Scott Lahteine
ec05408453
Add 3-frame fan animation to bitmaps ( #10654 )
2018-05-08 09:06:01 -05:00
Scott Lahteine
55f1f8446b
Show correct current units in M503
2018-05-08 06:29:53 -05:00
Giuliano
4e16e699c1
Fix sanity checks for dual axes ( #10633 )
2018-05-07 03:34:26 -05:00
Scott Lahteine
a1fab8336e
Fix abort of SD printing
2018-05-07 02:52:26 -05:00
Scott Lahteine
e978e6e782
[2.0.x] Arrange LCD options by type ( #10630 )
2018-05-06 19:16:55 -05:00
Scott Lahteine
8c5bc77fb9
Fix the sanity-check for config versions
2018-05-06 09:37:00 -05:00
Scott Lahteine
1f11b0f612
Fully init planner sync block
2018-05-06 08:16:54 -05:00
Scott Lahteine
f30241bda5
Merge pull request #10614 from thinkyhead/bf2_synced_planner_set_position
...
[2.0.x] Improve sync of planner / stepper position, asynchronous G92
2018-05-06 03:10:43 -05:00
Scott Lahteine
840ff60952
Bring some configs up to date
2018-05-06 02:42:27 -05:00
Phr3d13
71cd681473
Add Geeetech i3 Pro C / W examples ( #10626 )
...
Added base example configs for Geeetech's Pro C and Pro W machines.
2018-05-06 02:07:54 -05:00
Scott Lahteine
62e7a9c671
Fix up fwretract handling
2018-05-06 01:24:14 -05:00
Scott Lahteine
bfe223e120
Adjust usage of stepper.synchronize
2018-05-06 01:24:14 -05:00
Scott Lahteine
af1950a63e
Improve sync of stepper positions
2018-05-06 01:24:14 -05:00
Scott Lahteine
0c23792344
Apply int32_t to stepper
2018-05-05 18:21:03 -05:00
Roxy-3D
c2c02bdc67
Change Max7219 coordinates to traditional (X,Y)
2018-05-05 16:08:54 -05:00
Scott Lahteine
b337698f96
Additional patch for no heated bed
2018-05-04 00:15:37 -05:00
Scott Lahteine
76da6cc544
Fix Ender 2 build volume
2018-05-02 19:03:29 -05:00
Scott Lahteine
81b632c255
Additional temp-oriented improvements
2018-05-02 08:43:22 -05:00
nightdemonx
e911635fb1
Add thermocouple with AD8495 support
2018-05-02 08:43:16 -05:00
Scott Lahteine
00e86f1c2d
Add Velleman RGB-LED strip support to K8400
2018-05-02 08:10:48 -05:00
Bob-the-Kuhn
410b023b50
[2.0.x] Add Viki support to RAMPS_FD_V1 (DUE) ( #10598 )
2018-05-02 07:54:06 -05:00
Scott Lahteine
b7e938a9fb
LCD_BED_LEVELING enables a sub-menu for ABL
2018-05-01 07:13:56 -05:00
Scott Lahteine
a90d99c27c
Rename float32 => float52, etc.
2018-05-01 07:08:47 -05:00
Scott Lahteine
d7b699ec34
Fewer includes of vector_3.h
2018-05-01 07:05:18 -05:00
thisiskeithb
9312636ee4
Ender-3 config files ( #10585 )
2018-05-01 06:44:50 -05:00
Scott Lahteine
05fca752d6
Clean up autostart handling
2018-05-01 01:35:57 -05:00
Scott Lahteine
c87b0e21be
Add units to probe speed comments
2018-04-30 23:50:28 -05:00
Scott Lahteine
2c1205d8b1
Improve debug of homing move feedrate
2018-04-30 23:49:51 -05:00
Scott Lahteine
c8e4b7c8a6
Fix XY homing move away rate
2018-04-30 23:49:07 -05:00
Scott Lahteine
05c33833e7
[2.0.x] Add NO_LCD_MENUS option ( #10582 )
2018-04-30 21:16:31 -05:00
Scott Lahteine
524cc392f4
Fix sd_status comparison
...
Co-Authored-By: perkmeister <perkmeister@users.noreply.github.com>
2018-04-30 21:09:50 -05:00
MagoKimbra
1f92b9a4ed
Fix do_probe_move with fr_mm_s ( #10576 )
2018-04-30 16:28:20 -05:00
Scott Lahteine
a73cece360
Fix utility.cpp for DEBUG_LEVELING_FEATURE
...
As mentioned in https://github.com/MarlinFirmware/Marlin/issues/9429#issuecomment-385305597
Co-Authored-By: Jack Bradach <jack@bradach.net>
2018-04-30 03:40:50 -05:00
Scott Lahteine
4dfc011d86
Fix homing with probe feedrates
2018-04-30 03:35:07 -05:00
Scott Lahteine
59fda986ea
Allow Z_AFTER_PROBING to be 0
2018-04-30 03:25:47 -05:00
Scott Lahteine
63e4afc910
Do rounding in integer (instead of FIXFLOAT)
...
Co-Authored-By: Bob-the-Kuhn <bob-the-kuhn@users.noreply.github.com>
2018-04-29 19:33:26 -05:00
Scott Lahteine
616651ff23
Add sanity check for LED_CONTROL_MENU
...
Addressing #10569
2018-04-29 18:34:57 -05:00
Scott Lahteine
9e0d99c0c6
Round all floats in string conversion functions ( #10566 )
2018-04-29 00:51:36 -05:00
Scott Lahteine
3f68203324
Modify FastIO error message
2018-04-28 20:27:36 -05:00
Scott Lahteine
1dab44213a
Fix the TMC26X initializer CS pin argument
...
From #10531
Co-Authored-By: chriscg9 <chriscg9@users.noreply.github.com>
2018-04-28 12:02:45 -05:00
Scott Lahteine
cd08f01bb4
Fix M421 comment in gcode.h
2018-04-28 11:16:52 -05:00
Scott Lahteine
7546f87949
Allow a home bump of 0 when homing Z with probe
2018-04-28 10:26:31 -05:00
Scott Lahteine
d470a1234f
Fix ENABLED/DISABLED for DUE
...
…and any other platforms where `false`/`true` are defined as `0x0`/`0x1`.
This fixes issue #10550 .
2018-04-28 10:12:37 -05:00
Scott Lahteine
683dc24e0f
When homing with Z probe bump at Z_PROBE_SPEED_SLOW
2018-04-28 08:50:23 -05:00
Scott Lahteine
8db7fb226a
Fix M420 C for UBL
2018-04-28 08:14:20 -05:00
Scott Lahteine
ed8d2bc225
Clean up some endstop inverting examples
2018-04-28 08:04:43 -05:00
Scott Lahteine
c7305be4d2
Fix some endstop inverting settings
2018-04-28 08:04:33 -05:00
Bob-the-Kuhn
f973ff49ae
[2.0.x] MKS SBASE - Separate SD_DETECT for LCD and on-board SD cards ( #10557 )
2018-04-28 07:24:07 -05:00
Scott Lahteine
5ac226aa93
Further cleanup of inline delays
2018-04-27 19:22:22 -05:00
Marcio Teixeira
724e9f56c8
Removed "const" to match parser. ( #10548 )
2018-04-27 17:48:52 -05:00
Giuliano
2e1939e85c
[2.0.x] report error on unsupported commands ( #10553 )
...
Raise an error when an unknown/unsupported G/M command is requires.
This will address #10546
2018-04-27 17:40:27 -05:00
Scott Lahteine
a474a7e675
Correct AVR_ATmega328_FAMILY macro
...
…as with #10540
Co-Authored-By: per1234 <per1234@users.noreply.github.com>
2018-04-27 03:13:46 -05:00
Scott Lahteine
f790b4bc0a
Reorganize some conditionals
2018-04-27 02:23:11 -05:00
Scott Lahteine
a51ba6e3f6
Fix ABL grid bounds test for Delta/SCARA
...
Addressing #10538
2018-04-27 02:23:10 -05:00
Scott Lahteine
df6bc812b5
Fix disable of Z_HOMING_SENSITIVITY for HOMING_Z_WITH_PROBE
...
As pointed out in #10532
2018-04-27 02:23:10 -05:00
Scott Lahteine
63e0b36f8b
Fix G29_RECOVER_COMMANDS typo
2018-04-27 02:23:10 -05:00
Scott Lahteine
f83361a814
Apply const to tmc_sensorless_homing
2018-04-27 02:23:10 -05:00
Scott Lahteine
212e52e485
Basic delay for Max7219 on ARM
2018-04-27 00:41:29 -05:00
Scott Lahteine
7b6e742436
Wrap delay macros in do{}while(0)
2018-04-26 18:18:23 -05:00
Karl Andersson
58ca3be1ec
delayMicroseconds() cannot be called in critical section ( #10535 )
...
on the STM32 platform
2018-04-26 14:31:01 -05:00
Bob-the-Kuhn
00dfaae8df
[2.0.x] Platformio - automate build & environment selection ( #10503 )
2018-04-26 02:42:06 -05:00
Scott Lahteine
299c4fed42
Undefine PIDTEMPBED without a bed heater
2018-04-26 01:30:10 -05:00
Scott Lahteine
456cf971af
HAL FastIO cleanup and fixes
2018-04-26 00:40:16 -05:00
J.C. Nelson
5b5e322356
Set Interrupt Priorities and Grouping for STM32F103. ( #10517 )
2018-04-26 00:21:16 -05:00
Scott Lahteine
0e450df6a2
MKS OLED support for RUMBA
...
Based on #10519
Co-Authored-By: Alex <alex18881@users.noreply.github.com>
2018-04-25 23:00:44 -05:00
Scott Lahteine
2578996631
[2.0.x] Emergency parser for multiple serial ports ( #10524 )
2018-04-25 20:58:00 -05:00
Scott Lahteine
8cc31d1b2e
Cleanup to emergency parser
...
Followup to #10516
2018-04-25 06:54:37 -05:00
Chris Pepper
2242b98248
[LPC176x] Emergency Parser Feature ( #10516 )
2018-04-25 06:44:26 -05:00
Scott Lahteine
eef0248a1c
Add M420 C to adjust the whole mesh ( #10522 )
2018-04-25 06:43:45 -05:00
Eduardo José Tagle
c1e5ebbc1e
[2.0.x] AVR: Atomic bit set and clear of upper pin ports without critical section ( #10502 )
...
* AVR: Atomic bit set and clear
The critical section can be dropped, saving 3 cycles per access. Also simplified pin toggling for all ports.
2018-04-24 13:45:43 -05:00
Marcio Teixeira
02a711c4d6
[2.0.x] Fix crash upon repeated calls to process_subcommands_now_P ( #10509 )
2018-04-24 13:44:22 -05:00
Scott Lahteine
a3ce8a3fcd
Add sanity checks for EMERGENCY_PARSER
2018-04-24 09:24:26 -05:00
Scott Lahteine
f06c3c38b9
Fix M0_M1 with no LCD
2018-04-24 09:22:05 -05:00
Scott Lahteine
c82dd5129f
Revert potentially-not-redundant UBL test
...
Response to #10435
2018-04-24 08:04:13 -05:00
Scott Lahteine
9789c1c719
Fix current_temperature_chamber compile error
...
Fix #10505
2018-04-24 07:55:58 -05:00
Eduardo José Tagle
0c428a66d9
Proper AVR preemptive interrupt handling ( #10496 )
...
Also simplify logic on all ARM-based interrupts. Now, it is REQUIRED to properly configure interrupt priority. USART should have highest priority, followed by Stepper, and then all others.
2018-04-23 22:05:07 -05:00
Scott Lahteine
f423e54f77
Strip trailing spaces
2018-04-23 18:00:43 -05:00
Scott Lahteine
8177c4334e
Merge pull request #10498 from xC0000005/MalyanLCDFix
...
Fix overridden Malyan LCD functions
2018-04-23 17:22:43 -05:00
Scott Lahteine
cb46cb8480
Add HAS_HEATED_BED conditional ( #10495 )
2018-04-23 17:13:01 -05:00
Marcio Teixeira
10a25f733e
Add SENSORLESS_HOMING to Archim 2.0 ( #10500 )
2018-04-23 17:11:33 -05:00
xC0000005
24d23ce49b
Fix function definitions for Malyan LCD
2018-04-23 16:56:37 -05:00
Alexey Shvetsov
ad58b626a3
Fix pin mappings for Viki2 on Azteeg X5 GT ( #10487 )
2018-04-22 18:41:30 -05:00
Scott Lahteine
9e07df5c1b
Extra options for LEVEL_BED_CORNERS ( #10483 )
2018-04-22 02:50:48 -05:00
Scott Lahteine
1c3d49afe0
Fix G28 with Z_AFTER_PROBING
...
Fix #10476
2018-04-22 01:23:26 -05:00
Scott Lahteine
b6747c742a
Cleanup AZTEEG_X5_GT pins for VIKI
...
What should the SD detect and SDSS pins be? Followup soon on #8138
2018-04-22 01:19:43 -05:00
Scott Lahteine
023385ca59
Merge pull request #10479 from thinkyhead/bf2_creality_power_loss_resume
...
[2.0.x] Creality3D Power-Loss Recovery
2018-04-22 00:17:44 -05:00
Scott Lahteine
3396671011
[2.0.x] Reset LCD status to fallbacks ( #10470 )
...
* Remove obsolete strings
* Tweak some static consts
* Reset LCD status to fallbacks
2018-04-22 00:16:30 -05:00
Scott Lahteine
d58450c82a
Russian language update
...
Co-Authored-By: anton-piliugin <34044202+anton-piliugin@users.noreply.github.com>
2018-04-22 00:14:20 -05:00
Scott Lahteine
11ab017dd0
Creality3D Power-Loss Recovery
2018-04-21 21:56:50 -05:00
Scott Lahteine
594d6f9efd
Add POWER_LOSS_RECOVERY to example configs
2018-04-21 19:40:46 -05:00
Scott Lahteine
7dcd0a1cff
Add R parameter to G28 to specify pre-raise
2018-04-21 19:07:48 -05:00
Scott Lahteine
2f4b4d6076
Add Stopwatch::resume method
2018-04-21 19:06:05 -05:00
Scott Lahteine
a90cbc6339
[2.0.x] Wait for bed heaters between probing ( #10472 )
2018-04-21 15:43:21 -05:00
Scott Lahteine
a0dac95d25
Merge pull request #10460 from thinkyhead/bf2_trigorilla_14
...
[2.0.x] Split TRIGORILLA into 1.3 and 1.4
2018-04-20 18:25:40 -05:00
Scott Lahteine
f0cbf3d432
Correction to sanity check
2018-04-20 18:16:27 -05:00
Scott Lahteine
d8a8eec6ea
Add THERMAL_PROTECTION capability
...
Based on #10465
In response to `M115` the firmware reports if Thermal Protection is enabled (1) or not (0). This information can be used by software such as OctoPrint (more precisely the Printer Safety Check plugin) to warn users when Thermal Protection is not enabled in the firmware.
Co-Authored-By: andrivet <sebastien@advtools.com>
2018-04-20 16:50:50 -05:00
Scott Lahteine
186d71b361
Complete CREALITY_ENDER revert
2018-04-20 16:17:25 -05:00
Scott Lahteine
11ef432476
Match Makefile to boards.h
2018-04-20 16:13:50 -05:00
Scott Lahteine
2be5fe5ddf
Split TRIGORILLA into 1.3 and 1.4
2018-04-20 16:12:25 -05:00
Scott Lahteine
80e29492c6
TRIGORILLA => TRIGORILLA_13
2018-04-20 16:12:25 -05:00
Scott Lahteine
dea686cf55
Define short pin names in fastio for STM32 ( #10461 )
2018-04-20 14:54:35 -05:00
Scott Lahteine
65a6a86d19
Don't report point 0 in MBL G29
2018-04-20 13:12:50 -05:00
Scott Lahteine
6faa93d787
Add G29_RETRY_AND_RECOVER to example configs
2018-04-19 19:45:53 -05:00
Marcio Teixeira
5cc7916e69
Add G29_RETRY_AND_RECOVER feature
...
- Add an option to retry G29, optionally executing a G-code procedure after each failed probe.
2018-04-19 19:45:53 -05:00
Scott Lahteine
78ea4871f9
Fix up enqueue now functions
...
…and apply to MALYAN_LCD.
2018-04-19 19:45:53 -05:00
Roxy-3D
23635c2b64
Update ubl_motion.cpp
...
Restore necessary and needed loop termination logic.
2018-04-19 12:04:35 -05:00
Scott Lahteine
8ca3c43d73
Updated language_data spacing, headers
2018-04-19 06:16:16 -05:00
Scott Lahteine
184c077c58
Correct includes (u8g.h) and spelling
2018-04-19 06:16:16 -05:00
Yunhui Fu
627348b46c
move the TALL_FONT_CORRECTION to language files
2018-04-19 06:16:16 -05:00
Yunhui Fu
77bc653524
Use X windows 6x12 bitmap font to support western languages.
2018-04-19 06:16:15 -05:00
Yunhui Fu
d81649b365
Update language data for sk.
2018-04-19 06:15:19 -05:00
Yunhui Fu
41839746a2
Removed unused macros
2018-04-19 06:15:19 -05:00
Scott Lahteine
4f184ba5da
[2.0.x] Add BOARD_MKS_BASE_15 with digital micro-stepping ( #10454 )
...
* Add BOARD_MKS_BASE_15 with digital micro-stepping
* Rename MKS_13 to MKS_GEN_13
2018-04-18 22:58:43 -05:00
Scott Lahteine
ad6baa5c9d
Fix for UBL set_bed_leveling_enabled
2018-04-18 00:14:48 -05:00
Scott Lahteine
df2f24617b
Use 0 as the bed position (not Z_MIN_POS)
2018-04-17 20:32:56 -05:00
Karl Andersson
428c54f2ad
[2.0.x] HAL for STM32F4 ( #10434 )
2018-04-17 17:33:29 -05:00
Chris Pepper
744bcaee61
[2.0.x] Fix problems compiling with Arduino IDE ( #10441 )
...
* Fix problems compiling u8glib utf8 support on Arduino
* Change header in auto-generated font data
* Change include in font gen scripts
2018-04-17 17:28:55 -05:00
GMagician
20772492aa
Fix compile warnings in AVR fastio.h ( #10440 )
2018-04-17 17:26:57 -05:00
Scott Lahteine
f57a008c58
Merge pull request #10443 from thinkyhead/bf2_fix_and_improve
...
[2.0.x] Improve UBL mesh report, M420 V T, M421 N, and…
2018-04-17 16:59:31 -05:00
Scott Lahteine
89b1580587
Fix compile error in tmc_status
2018-04-17 16:13:28 -05:00
Scott Lahteine
52c024e260
M221 with no parameters report flow
2018-04-17 16:06:25 -05:00
Scott Lahteine
01b01f6dfd
Tweak fwretract.retract debug, comments
2018-04-17 16:05:25 -05:00
Scott Lahteine
e4acd2c40e
One fewer compare in _lcd_move_xyz
2018-04-17 16:03:15 -05:00
Scott Lahteine
e05c825a05
Update position for UBL non-segmented activate/deactivate
2018-04-17 16:02:02 -05:00
Scott Lahteine
d462be6de6
Try FIXFLOAT rounding based on sign
2018-04-17 15:59:04 -05:00
Scott Lahteine
39c6f65ce7
Ignore LCD_BED_LEVELING with UBL
2018-04-17 15:57:44 -05:00
Scott Lahteine
0746aff595
Improve UBL mesh report. Add M420 T, M421 N
2018-04-17 15:52:56 -05:00
Scott Lahteine
3c826e5d05
Prevent delay when power is already on
...
Fix #10410
2018-04-17 04:34:31 -05:00
Scott Lahteine
5a064d0e94
Fix bug in planner.set_position_mm
2018-04-16 04:19:58 -05:00
Scott Lahteine
0945674ba2
Use H0 by default with UBL_MESH_EDIT_MOVES_Z ( #10428 )
2018-04-15 20:49:14 -05:00
Scott Lahteine
6cb83758d7
Fix Brazilian Portuguese language duplicates
2018-04-15 19:18:08 -05:00
Scott Lahteine
8f57e098de
Use end-of-line comments in planner.cpp
2018-04-15 19:02:30 -05:00
Scott Lahteine
6c7a17dba6
Abort SD printing more safely ( #10407 )
...
Allow the current command to complete when aborting an SD print, otherwise some commands (G28, G29, etc.) will cause trouble.
2018-04-15 18:27:54 -05:00
Chris Pepper
c9aed73987
Fix missed includes from HAL macro patch ( #10416 )
2018-04-15 18:27:34 -05:00
Scott Lahteine
9f8a96fb8a
Brazilian Portuguese update ( #10409 )
2018-04-15 13:13:46 -05:00
Yunhui Fu
93273a4c9e
Fix u8g.h search path error ( #10419 )
...
Support env MARLIN_LANGS for user select generated language, and update doc; update script to generate dogm_font_data_ISO10646_1.h automatically.
2018-04-15 13:12:02 -05:00
Scott Lahteine
584735c994
u8g.h => clib/u8g.h
2018-04-14 12:26:01 -05:00
Scott Lahteine
29dda871cb
Patch "upload_disk" to make python happy
2018-04-13 22:27:08 -05:00
Scott Lahteine
36b97bde9f
clear_block_buffer, kill_current_block in quick_stop
2018-04-13 22:04:53 -05:00
Scott Lahteine
99282a46e9
Make sure ABL (manual) starts close to the bed
2018-04-13 20:19:30 -05:00
Roxy-3D
21f13f9e57
Stow Probe at end of G29 J3
2018-04-13 14:46:47 -05:00
KangDroid
6c535081ec
[2.0.x] Add optional menu item to toggle software endstops ( #10389 )
2018-04-13 00:24:09 -05:00
Scott Lahteine
3c5c6d478a
Prettify process_parsed_command
2018-04-13 00:23:11 -05:00
Scott Lahteine
0535ebc4d2
MESH_BED_LEVELING before PROBE_MANUALLY
2018-04-12 22:45:52 -05:00
Scott Lahteine
bb7064cc30
Tweak MBL move to bed code
2018-04-12 22:43:02 -05:00
Chris Pepper
cc6d41e1d3
Use a macro for HAL header redirection ( #10380 )
2018-04-12 20:25:08 -05:00
Luc Van Daele
12785583d0
[2.0.x] G33 MIN_STEPS_PER_SEGMENT ( #10386 )
2018-04-12 20:22:29 -05:00
Yunhui Fu
c96412a78f
[2.0.x] UTF-8 language translation support ( #10213 )
2018-04-12 20:14:01 -05:00
Scott Lahteine
daa712455b
Make sure MBL starts close to the bed
...
Fix #10390
2018-04-12 19:36:37 -05:00
Scott Lahteine
4c8751727a
Fix M118 parameter handling
...
Fix #10388
2018-04-12 19:10:04 -05:00
Scott Lahteine
3bc179a16f
Compress/update comments ubl_motion
...
…to fit more code on the screen and correct outdated commentary contrasting ABL.
2018-04-12 18:07:19 -05:00
Luc Van Daele
646aa20b43
Overhaul of G33 Delta Calibration ( #8822 )
2018-04-11 21:14:48 -05:00
Luc Van Daele
ac2e0afb62
Low Point for delta calibration ( #10363 )
2018-04-11 18:59:46 -05:00
Eduardo José Tagle
57a899a412
[2.0.x] 6th-order jerk-controlled motion planning in real-time for AVR ( #10373 )
2018-04-11 18:13:42 -05:00
Bob-the-Kuhn
85014cd132
[2.0.x] LPC1768 - automatic selection of upload disk ( #10374 )
2018-04-11 14:41:16 -05:00
Scott Lahteine
8669dba5e6
Merge pull request #10172 from noingwhat/2.0.x-Filament-Change-Acceleration
...
[2.0.x] Filament load/unload add acceleration for Bowden
2018-04-11 00:39:11 -05:00
Scott Lahteine
472ab0cc24
Tweak RAMPS SDSS pins
2018-04-10 16:47:48 -05:00
LichtiMC
b94c8defee
Provide additional information about SMART-RAMPS board ( #10353 )
2018-04-10 04:02:55 -05:00
Scott Lahteine
6f8e228880
Add RESET_PIN to pins_RAMPS_SMART.h
2018-04-10 03:34:20 -05:00
Sean
2d9b0a66fe
Add Filament Change accelerations
2018-04-09 23:57:27 -05:00
Scott Lahteine
71d3523254
Add Filament Change accelerations to example configs
2018-04-09 23:57:23 -05:00
Scott Lahteine
8b8ad14178
Add Z_PROBE_LOW_POINT to prevent damage
2018-04-09 17:23:03 -05:00
Scott Lahteine
82dafbba33
Add Z_PROBE_LOW_POINT to example configs
2018-04-09 01:55:05 -05:00
Roxy-3D
a731a723e8
Better i3-2020 Z_PROBE_OFFSET_FROM_EXTRUDER
2018-04-08 21:26:36 -05:00
Roxy-3D
26cc12eaa4
Resolve corruption of Max7219 Debug LED Matrix
2018-04-08 21:26:36 -05:00
Scott Lahteine
dca69efc11
Update Bed PID comments
2018-04-08 06:44:47 -05:00
Scott Lahteine
56486c5c0e
Apply const to manage_inactivity
2018-04-08 04:00:26 -05:00
Scott Lahteine
a6485456df
Fix LIGHTWEIGHT_UI with UBL
...
See https://github.com/MarlinFirmware/Marlin/issues/10317#issuecomment-379100702
2018-04-08 03:24:22 -05:00
Scott Lahteine
e02fc4f1d6
Better RESTORE_LEVELING_AFTER_G28 sanity-check
...
As suggested by @GMagician
2018-04-08 03:24:15 -05:00
Scott Lahteine
44a697ab04
Set STM32F1 TEMP_TIMER_FREQUENCY to 1K
...
Responding to https://github.com/MarlinFirmware/Marlin/pull/8833#issuecomment-379426803
2018-04-08 01:08:05 -05:00
Scott Lahteine
cec6e19099
Add RepRapPro Huxley configuration
...
Based on #10343 by @indazoo
2018-04-08 00:37:18 -05:00
Scott Lahteine
9ff4e9e1e6
Patch _IS_HW_SPI so defined() works
2018-04-07 23:29:00 -05:00
Scott Lahteine
cea398849e
Tweak to gcode_line_error/return
2018-04-07 21:25:49 -05:00
etagle
a29adde5c0
Implement BEZIER_JERK_CONTROL
...
Enable 6th-order jerk-controlled motion planning in real-time.
Only for 32bit MCUs. (AVR simply does not have enough processing power for this!)
2018-04-07 21:03:28 -05:00
Scott Lahteine
5932df7ea1
Add BEZIER_JERK_CONTROL to example configs
2018-04-07 21:03:22 -05:00
Lenbok
0e8242180d
Chamber temperature monitoring and auto fan control.
...
This is an initial cut for feedback, updated for 2.0.x.
Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?
Chamber temperatures are not reported on the LCD in any way.
When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.
As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
2018-04-06 23:09:06 -05:00
Scott Lahteine
5b3bda1c16
Add Chamber Temp options to example configs
2018-04-06 23:09:06 -05:00
Bob-the-Kuhn
acda4ecb20
Fix DUE Trinamic SW/HW SPI sanity check ( #10336 )
2018-04-06 22:22:30 -05:00
Bob-the-Kuhn
ab715c70d1
TMC SPI sanity-check and pins debugging ( #10324 )
2018-04-06 20:24:54 -05:00
Scott Lahteine
4dc7e64789
Update Slovak language
...
Based on #10313 by @rmoravcik
2018-04-06 20:23:20 -05:00
Scott Lahteine
0dccf9ea6a
Merge pull request #10318 from marcio-ao/pr-einsy-retro-tmc2130
...
[2.0.x] Fix TMC2130 DIAG1 active high, Einsy Retro
2018-04-06 20:18:34 -05:00
Marcio Teixeira
2efc072fdb
Clear progress bar on completion ( #10333 )
...
Fix #10330
2018-04-06 20:13:19 -05:00
GMagician
6ce060cfe0
[2.0.x] Update language_it.h ( #10322 )
...
Updated to #10296
2018-04-06 20:07:46 -05:00
Marcio Teixeira
9356cf648f
Added support for Einsy Retro
...
http://reprap.org/wiki/EinsyRetro
2018-04-06 19:48:46 -05:00
Marcio Teixeira
75037493fa
Default active low for TMC2130 DIAG1 ( #10294 )
...
- Added sanity check to inform users to set the endstop to inverting
when using SENSORLESS_HOMING
2018-04-06 19:48:46 -05:00
Scott Lahteine
e8e60263c8
Scale feedrate (mm/s to deg/s) for SCARA
2018-04-06 19:47:48 -05:00
Scott Lahteine
051303ad42
Russian language updates
...
From #10311 by @anton-piliugin
2018-04-05 00:46:46 -05:00
Sean
2fa0a73c2c
Implement filament change continuous purge
2018-04-04 20:57:51 -05:00
Scott Lahteine
d133ad61f3
Add continuous purge to example configs
2018-04-04 20:56:18 -05:00
Scott Lahteine
4b25543633
Backtrace formatting cleanup
2018-04-04 20:24:39 -05:00
Bob-the-Kuhn
902c885782
Switch to TMC2130 compatible hardware SPI & misc ( #10299 )
2018-04-04 20:13:27 -05:00
Scott Lahteine
1c36606886
Fix MSG_HEATING_FAILED_LCD_BED macro evaluation
2018-04-04 19:01:22 -05:00
Scott Lahteine
fe91514395
MBL should add z_offset regardless of fade ( #10308 )
2018-04-04 18:57:33 -05:00
Marcio Teixeira
8bc93c6f2b
Improve heating/cooling LCD messages ( #10293 )
2018-04-04 18:29:27 -05:00
GMagician
21a47b50f4
Additional tool-change fixes ( #10304 )
...
Followup to #10257
2018-04-04 17:06:33 -05:00
Scott Lahteine
f68b4265a6
Fix a probe pin definition
2018-04-02 21:52:34 -05:00
Yunhui Fu
a019eebdd6
support utf8 unicode for test language ( #10220 )
2018-04-02 20:03:25 -05:00
Scott Lahteine
656219d867
Add configs for Creality CR-8
2018-04-02 20:02:04 -05:00
Karl Andersson
7cbbc2af7a
[2.0.x] Optional heater signal inversion ( #10260 )
2018-04-02 19:37:41 -05:00
Marcio Teixeira
4d1a61335c
[2.0.x] Fixed Makefile for Marlin 2.0 ( #10255 ) ( #10281 )
...
* Fixed Makefile for Marlin 2.0 (#10255 )
- Makefile now supports the new Marlin 2.0 directory hierarchy.
- RELOC_WORKAROUND is now automatically enabled based on avr-gcc version.
* Makefile support for U8glib and TMC2130Stepper
- Updated paths for oliver's U8glib 1.19.1
- Added option for teemuatlut's TMC2130Stepper 2.2.1
2018-04-02 19:36:27 -05:00
Scott Lahteine
241996d5d6
Merge pull request #10257 from thinkyhead/bf2_tool_change_debug
2018-04-02 19:33:45 -05:00
Scott Lahteine
4c79dc1093
Fix a Serial+EEPROM compile error
...
Fixes #10278
2018-04-02 03:11:20 -05:00
Scott Lahteine
93305a2d5e
Fix some spellings
2018-04-02 03:03:37 -05:00
Scott Lahteine
adcb87f0db
Z Endstop Servo => Z Probe Servo
2018-04-01 23:54:21 -05:00
Scott Lahteine
4f0eafce8f
Add more AVR boards to Makefile
2018-04-01 18:22:06 -05:00
Scott Lahteine
4a23069de9
Fix Ender 4 / CR-8 compilation
...
- Assign 243 (like EFB) as Ender-4/CR-8 board ID
- Add to `Makefile`
- Add to `pins.h`
2018-04-01 18:22:06 -05:00
Scott Lahteine
02f0f95d40
Handle disabled HYBRID_THRESHOLD in EEPROM ( #10275 )
2018-04-01 16:58:37 -05:00
Scott Lahteine
9ec2c03c5b
Fix likely error in retract/recover
...
Addressing #10200
2018-03-31 23:01:13 -05:00
Scott Lahteine
49f384a2ab
Note about MKS_MINI_12864 in sanitycheck
2018-03-31 22:52:23 -05:00
Scott Lahteine
2672120a97
Do a small raise for all move-back
2018-03-31 22:43:05 -05:00
Scott Lahteine
5acccbacc1
Simplified leveling-based tool change
2018-03-31 22:43:05 -05:00
Scott Lahteine
1a75165f35
For set_z_fade_height use set_bed_leveling_enabled
2018-03-31 22:43:05 -05:00
Scott Lahteine
d1734a089a
Split up tool_change for some setups
2018-03-31 22:43:05 -05:00
Scott Lahteine
a9f94f260a
Some RADDS pin updates
2018-03-31 22:15:24 -05:00
Scott Lahteine
31df43212c
Use lcd_printPGM_utf in more places
...
Fix #10256
2018-03-31 20:49:20 -05:00
Scott Lahteine
7d8a46519f
Output ABC for delta stepper counts
2018-03-31 20:13:32 -05:00
Scott Lahteine
6098efcc59
Use float62 for LCD edit of Z Fade
2018-03-31 20:03:09 -05:00
Scott Lahteine
f6d13e2295
Allow Z_SAFE_HOMING sanity checks to handle floats
2018-03-31 19:01:56 -05:00
Scott Lahteine
889fd5f71f
Backtrace minor cleanup
2018-03-31 18:59:36 -05:00
Scott Lahteine
53f0c7522a
Symmetrical FWRETRACT Z Hop
...
Do the Z lift normally before setting Z back to its prior value. But do the Z lower using spoofing. This should produce proper symmetrical movement.
2018-03-30 15:54:01 -05:00
Scott Lahteine
ac7e97f4fe
Change order of inactive stepper disable/enable
...
This ensures that steppers that share an enable pin will only be disabled for a miniscule time.
2018-03-30 15:07:38 -05:00
Scott Lahteine
55e9b85ad6
Clear the "Wait for user" message set by M0/M1
...
See https://github.com/MarlinFirmware/Marlin/issues/10246#issuecomment-377146936
2018-03-29 18:38:12 -05:00
Scott Lahteine
b6a55f0891
Temporary workaround for tool-change compile error
...
Pending a more complete solution to tool-change Z deviation.
2018-03-29 17:55:57 -05:00
Scott Lahteine
b852781eba
Fix BLTOUCH compile error
...
Followup to #10250
2018-03-29 17:55:57 -05:00
AnHardt
c1f58a238d
No delay in sensorless quick homing ( #10254 )
2018-03-29 16:10:20 -05:00
Scott Lahteine
1be955e52a
Alert users about low Z jerk values
2018-03-28 23:08:33 -05:00
Scott Lahteine
9e4c037cef
Wait before turning off PRINTER_EVENT_LEDS at print end ( #10248 )
2018-03-28 22:59:28 -05:00
Scott Lahteine
8b7381b626
Clear sensorless homing in home_delta after first move-to-top
2018-03-28 22:01:42 -05:00
Scott Lahteine
dbe2b6f7b0
Do moves towards endstops differently in do_homing_move
2018-03-28 22:01:42 -05:00
Scott Lahteine
d573a2cada
Fix pins_RAMPS.h for 32-bit platforms
...
Followup to 436e5b7
2018-03-28 22:01:20 -05:00
Scott Lahteine
f04be05a14
"G28 Z Forbidden" => "Home XY first"
...
Some languages will need to be updated for proper phrasing
2018-03-28 21:51:15 -05:00
Scott Lahteine
a97624dd81
Allow pinsDebug "Analog in" long int
2018-03-28 20:40:28 -05:00
Scott Lahteine
7b8bb2519e
Fix gcode_line_error call
...
Followup to 3007eee
2018-03-28 20:29:41 -05:00
Scott Lahteine
aa20b3ef7c
Fix linear/3-point manual leveling buffer overrun
...
Fixes #10137
2018-03-28 18:41:22 -05:00
Alexey Shvetsov
cbdc78ec0f
Fix STM32 compilation with PlatformIO ( #10245 )
2018-03-28 18:35:20 -04:00
Scott Lahteine
9d2ea5d64b
Undo German changes
...
See 941e9bd329 (commitcomment-28262166)
2018-03-28 17:05:14 -05:00
Scott Lahteine
2bc7f416ee
Fix missing comma in tmc_sgt
...
Fixes #10209
2018-03-28 17:05:14 -05:00
Scott Lahteine
38378cd0e8
M218 with DELTA needs planner.h
...
Fix #10232
2018-03-28 17:05:14 -05:00
Scott Lahteine
3007eee22e
Require a checksum when writing to SD
...
From #10204 by @adriancuzman
2018-03-28 17:05:13 -05:00
Bob-the-Kuhn
9656a82609
Fix G53/CNC_COORDINATE_SYSTEMS compilation, Travis testing ( #10227 )
2018-03-28 14:14:39 -04:00
Eduardo José Tagle
749f19e502
[2.0.x] Move backtrace to a shared location ( #10237 )
...
- And implement the `backtrace()` function call
2018-03-28 14:13:20 -04:00
xC0000005
7dc256432f
Restore STM32F1 series to working order. ( #10229 )
...
The `_O2` attribute is no longer needed on the malyanlcd function, and the macros have broken timer numbers - reset this to a function to return the right device. Also fix the bit order cast in SPI.
2018-03-28 14:07:52 -04:00
Rob Power
d1f14202a9
[2.0.x] NANODLP_Z_SYNC requires linear axes ( #10240 )
2018-03-28 14:03:34 -04:00
Scott Lahteine
b287560258
Fix say_M603
2018-03-28 12:54:58 -05:00
Scott Lahteine
436e5b7ea3
Apply spacing in pins files
2018-03-28 12:52:08 -05:00
Scott Lahteine
4d533b9baa
Update bq Hephestos 2 probe offset
...
From #10234 by @thopiekar
2018-03-27 21:05:03 -05:00
Bob-the-Kuhn
78df07ac71
Merge pull request #10221 from ejtagle/bugfix-2.0.x
...
[2.0.x] DUE: Several fixes to the backtracker
2018-03-27 03:26:10 -05:00
etagle
8934a2c49b
Added some missing Thumb instructions to the traceback follower, so now it is able to traceback through switch() statements
2018-03-27 04:30:38 -03:00
etagle
328edea03a
Several fixes to the backtracer. Tested ant it works
2018-03-26 03:42:54 -03:00
Scott Lahteine
aa6dacbbdf
German update
...
Based on #10216
2018-03-25 15:21:13 -04:00
Yunhui Fu
8322a79bb9
update the UTF-8 C strings for Chinsee languages, for Simplified and Traditional Chinese ( #10211 )
2018-03-25 12:37:54 -04:00
ejtagle
9a24c0ae3f
Tons of fixes to the backtracker code, and also added an extra backtracker that does not require unwind tables to work and it is used if unwind tables are absent
2018-03-25 00:52:04 -03:00
Scott Lahteine
a891af2f7a
Enforce minimum TMC2130 / TMC2208 libs
2018-03-24 15:57:22 -04:00
Bob-the-Kuhn
75b381cd28
Merge pull request #10203 from Bob-the-Kuhn/sanity-check-fix
...
[2.0.x] Fix TMC sanity checks that always fail
2018-03-24 14:06:34 -05:00
Bob-the-Kuhn
433e984d1f
move comment to fix compile error
2018-03-24 13:44:54 -05:00
Bob-the-Kuhn
f7857ac8a8
Merge pull request #10185 from ejtagle/bugfix-2.0.x
...
[2.0.x] DUE debugging: Solve WDT startup delay, add traceback & crash report uses programming port baud rate
2018-03-24 13:32:34 -05:00
Bob-the-Kuhn
b756a15aba
another needs to be deleted
2018-03-24 10:22:03 -05:00
Bob-the-Kuhn
50c81ebe0d
remove check that always fails
2018-03-24 09:36:50 -05:00
Scott Lahteine
3ac135cef3
Enforce minimum TMC2130 / TMC2208 libs
2018-03-23 18:05:23 -04:00
Bob-the-Kuhn
8870f9b1da
Fix M503 helper functions following TMC updates ( #10197 )
2018-03-23 16:43:43 -05:00
Scott Lahteine
bb7236a750
Z correction on tool-change for all HAS_MESH ( #10199 )
2018-03-23 13:12:00 -05:00
Bob-the-Kuhn
509227fd80
change to mode 0
2018-03-23 09:37:58 -05:00
etagle
c3b23974bd
Added detection of case when no unwind tables are available
2018-03-23 05:22:45 -03:00
Scott Lahteine
ea1a83ce41
Use pgm_read_ptr for tables of pointers
2018-03-23 02:16:35 -04:00
Scott Lahteine
9da0797e29
Fix EEPROM size of tmc_hybrid_threshold
...
Followup to #10102
2018-03-23 02:08:35 -04:00
teemuatlut
daf643e1ce
[2.0.x] TMC: Match axis label order ( #10188 )
2018-03-23 01:04:12 -05:00
Roxy-3D
1628a9e864
make data declarations consistent
2018-03-22 19:25:28 -05:00
etagle
b210bdf032
Now the Crash reporter uses the configured BAUDRATE to send the report through the Programming port. And also shows the traceback of functions as discussed. For that latest feature to work, you need to compile the project with -funwind-tables and -mpoke-function-name compiler flags
2018-03-22 03:34:03 -03:00
etagle
c5730cf711
As Bob-The-Khun suggested, resetting the USB peripheral solves the huge startup delays that happen when a WDT reset happens and we are connected through the native port
2018-03-22 03:31:25 -03:00
Scott Lahteine
1cb810ff1c
[2.0.x] Automatically reset stepper timeout ( #10179 )
...
* Automatically reset stepper timeout in manage_inactivity
Any code that adds moves to the planner can skip resetting the stepper timeout. We can let `idle` / `manage_inactivity` reset the timer whenever it detects any moves in the planner.
* blocks_queued => has_blocks_queued
2018-03-21 19:30:06 -05:00
Eduardo José Tagle
97e8a6ebd9
Various fixes for DUE... ( #10152 )
...
- Watchdog reset during SD Card initialization.
- Move `DebugMonitor` to `DebugMonitor_Due.cpp`.
- Since the watchdog is enabled on boot do extra resets during init.
- Have `thermalManager` do watchdog reset before its ISR starts to prevent reset.
- Ensure that timers are stopped before reprogramming them to address tone issues.
- Improve SAM3XE reset when reflashed through the native port.
2018-03-21 19:04:45 -05:00
Roxy-3D
c3c264978f
correct truncated comment
2018-03-21 16:54:45 -05:00
Scott Lahteine
9fd1016bb1
Trust the bootloader to clear globals
2018-03-21 05:49:39 -05:00
Scott Lahteine
045ee28c50
Tweaks to M915
2018-03-21 05:15:25 -05:00
Scott Lahteine
987597532c
For MK2_MULTIPLEXER undef DISABLE_INACTIVE_EXTRUDER
...
Fix #10098
2018-03-21 04:34:50 -05:00
Scott Lahteine
ff304d3767
Allow G53 to go back to native space
2018-03-21 01:38:25 -05:00
Scott Lahteine
bc45fb6b13
Tweak use of move_z_after_probing
2018-03-21 01:25:08 -05:00
Scott Lahteine
c352954882
Allow no raise after run_z_probe in probe_pt
2018-03-21 01:24:51 -05:00
Scott Lahteine
ae39fbd646
Also suppress keepalive with suspend_auto_report
2018-03-21 00:29:09 -05:00
Scott Lahteine
8dfaf1539e
Merge pull request #10102 from thinkyhead/bf2_eeprom_M913
...
[2.0.x] More complete Trinamic driver options
2018-03-20 23:14:19 -05:00
AnHardt
837ac2fdbd
[2.0.x] Fix_Autotune_THERMAL_PROTECTION_BED_off ( #10166 )
...
- Fix Autotune Thermal Protection
- Make 2 constants in autotune configurable
2018-03-20 16:48:36 -05:00
Bob-the-Kuhn
785dbfc72d
[2.0.x] FASTIO consistency ( #10164 )
2018-03-20 16:24:50 -05:00
Bob-the-Kuhn
7308ef7809
Add conditional, give DUE SPI a unique name, fix compiler warnings ( #10168 )
2018-03-20 15:53:21 -05:00
teemuatlut
b5b39af531
[2.0.x] TMC: Fix CURRENT_STEP_DOWN ( #10170 )
2018-03-20 15:16:05 -05:00
Scott Lahteine
a5c6d3c7b8
Prevent null pointer crash in Endstops::update
...
Thanks to Evgeny Kotsuba!
2018-03-20 04:21:18 -05:00
Scott Lahteine
a46bac3100
Add 'I' parameter to M906/M913/M914; 'T' to M906/M913
2018-03-19 22:05:16 -05:00
Scott Lahteine
cfc13ed7f3
Quiet M906/M913/M914 with axes. Patch for DISTINCT_E_FACTORS.
2018-03-19 22:05:16 -05:00
Scott Lahteine
c95450016b
Improve Trinamic support in the EEPROM
2018-03-19 22:05:16 -05:00
Scott Lahteine
48d7036874
Consolidate smart stepper driver initialization
2018-03-19 22:05:16 -05:00
Bob-the-Kuhn
53362b81cc
Tone fixes/changes ( #10151 )
2018-03-19 04:48:06 -05:00
Scott Lahteine
dd2949922b
Consolidate 3-point leveling point options
2018-03-19 04:12:20 -05:00
Scott Lahteine
1d22609473
MIN_PROBE_EDGE replaces DELTA_PROBEABLE_RADIUS
2018-03-19 04:11:46 -05:00
Scott Lahteine
eaefc1e410
Add CorePQ support for BABYSTEPPING ( #10155 )
2018-03-19 02:51:40 -05:00
Scott Lahteine
72281c4ff9
Turn power off in kill instead of setting PS_ON to input
2018-03-19 02:37:55 -05:00
Scott Lahteine
9d99360912
Fix matrix.debug output
2018-03-18 20:02:20 -05:00
Eduardo José Tagle
bbfbf90797
Fix for DUE - no host support on native USB if SD card not enabled ( #10148 )
2018-03-18 19:49:51 -05:00
Scott Lahteine
772810fb24
Followup to PORTVAR patch
2018-03-18 19:23:58 -05:00
Scott Lahteine
978f342392
Reduce some tmc_util strings
2018-03-18 18:58:10 -05:00
Scott Lahteine
fbdc5ad962
Prevent lcd_update stack overflow on SD Card change
2018-03-18 18:58:10 -05:00
Scott Lahteine
c0d694d5d3
Squash UBL postscript comment
2018-03-18 18:58:10 -05:00
Scott Lahteine
93af8aa157
Fix home_delta for SENSORLESS_HOMING ( #10145 )
2018-03-17 20:52:06 -05:00
Scott Lahteine
0543362b34
Don't init the tone timer if no BEEPER_PIN
2018-03-17 18:59:43 -05:00
Scott Lahteine
c6ff39cc14
Spacing cleanup
2018-03-17 16:49:08 -05:00
Scott Lahteine
9e9e29ddf8
Einsy: Regular endstops and BLTOUCH pins
...
Based on #10131
2018-03-17 16:43:09 -05:00
Bob-the-Kuhn
c79b53d406
Merge pull request #10140 from Bob-the-Kuhn/DUE-full-speed
...
[2.0.x] DUE - add full speed USB native port option
2018-03-17 13:41:45 -05:00
Bob-the-Kuhn
7f1afbfd60
can't type
2018-03-17 13:07:49 -05:00
Bob-the-Kuhn
23760d6c14
add full speed option
2018-03-17 12:56:44 -05:00
Bob-the-Kuhn
cbcd1ed42d
full speed
2018-03-17 02:57:18 -05:00
Scott Lahteine
6689884910
Easier override of ST7920 LCD timing
2018-03-17 02:40:24 -05:00
Scott Lahteine
d603e655d3
Fix SWITCHING_EXTRUDER manual movement
2018-03-16 03:22:56 -05:00
Scott Lahteine
5f77816772
Reduce size of "only one" sanity checks
2018-03-16 02:43:02 -05:00
Scott Lahteine
8922b56b58
Fix some spelingz
2018-03-16 01:25:41 -05:00
Scott Lahteine
a6feb58837
Delta support for multiple hotends with offsets ( #10118 )
2018-03-16 00:46:42 -05:00
TheSFReader
2e43438e0c
Add C parameter to M27 to include the long filename
...
In answer to #10001
Add an option to retrieve the currently open file name (long filename if possible).
2018-03-15 23:06:18 -05:00
Scott Lahteine
2168d6ac25
Allow NULL prepend in lsDive
2018-03-15 23:06:17 -05:00
Scott Lahteine
1e946d681d
Update Marlin for newest TMC libraries
...
- TMC2130Stepper v2.2.0
- TMC2208Stepper v0.0.4
2018-03-15 22:23:31 -05:00
shaktee
63fc4a8521
BIBO2 default update and Cyclops config ( #10108 )
2018-03-15 00:16:55 -05:00
etagle
404fc94705
DUE USB CDC: Do not send any character if no program on the PC is listening to them. This avoids Marlin waiting until the user actually opens a program that is able to consume the output of Marlin
2018-03-15 00:56:28 -03:00
Scott Lahteine
4aebe3d82e
Pretty up EEPROM port args
2018-03-14 22:44:25 -05:00
Scott Lahteine
51bf3c9503
Fix E direction for MK2_MULTIPLEXER with LIN_ADVANCE
2018-03-14 07:56:18 -05:00
teemuatlut
e6dcfa64b0
Cast SERIAL_CHAR to void in M122 ( #10086 )
2018-03-14 07:09:06 -05:00
Marcio Teixeira
c24dbcbfe1
When STATUS_EXPIRE_SECONDS is 0, hide the position. ( #10081 )
...
Some users may prefer to hide the position updates on the `LIGHTWEIGHT_UI` altogether. This leads to an even less cluttered display (it also saves on SPI traffic and one byte of RAM).
2018-03-14 02:44:30 -05:00
Studiodyne
e7a61de8af
[2.0] FWRetract Reset (Best way) ( #10083 )
2018-03-14 01:35:30 -05:00
Scott Lahteine
f894209de2
Merge pull request #10093 from thinkyhead/bf2_trinamic_config
...
[2.0.x] Clean up Trinamic config options, sanity check
2018-03-14 01:16:55 -05:00
Scott Lahteine
f1327fd5f9
Use lcd_goto_previous_menu_no_defer more
2018-03-14 00:50:15 -05:00
Scott Lahteine
e7570f3195
Improve TMC config organization, naming
2018-03-14 00:18:41 -05:00
Scott Lahteine
374ea49be9
Revert marlinAnalogInputToDigitalPin
2018-03-14 00:18:40 -05:00
Scott Lahteine
34f656decd
Add TMC2208 include in tmc_util.h
2018-03-14 00:18:40 -05:00
Scott Lahteine
07cf2cd9c4
Fix sensorless_homing_per_axis compile warning
2018-03-14 00:18:40 -05:00
Scott Lahteine
b858c638ad
Fix compiler warning for HAL_ANALOG_SELECT
2018-03-13 22:33:21 -05:00
Bob-the-Kuhn
c4467da53a
Merge pull request #10063 from ejtagle/bugfix-2.0.x
...
[2.0.x] DUE - add programming capability to native port
2018-03-13 22:07:21 -05:00
Scott Lahteine
65ce0303f8
Fix MKS_12864_OLED blank issue
...
Fixes #10071
2018-03-13 04:54:23 -05:00
Scott Lahteine
36452b4d6e
Fix filename HAL/DUE/servotimers.h => ServoTimers.h
2018-03-13 01:38:37 -05:00
Scott Lahteine
14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) ( #10069 )
...
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
2018-03-13 01:15:22 -05:00
Scott Lahteine
5dec828abc
Add MKS_12864OLED to lcd_implementation_init
...
Followup to #7914
2018-03-12 08:54:17 -05:00
Scott Lahteine
468f34104b
Patch do_blocking_move_to so 'destination' can be used
2018-03-12 08:16:17 -05:00
Scott Lahteine
5b45aab262
M218: report with no parameters
2018-03-12 08:14:35 -05:00
Scott Lahteine
18de11c1ea
Followup to auto-assign of dual axis CS pins
2018-03-12 07:19:56 -05:00
ejtagle
703c8ac0ef
Added Arduino-compatible kludge to the (ATMEL supplied) SAM3X USB stack we are now using so the Native port is also usable as a programming port on Arduino DUE and derived designs
2018-03-11 15:17:55 -03:00
Scott Lahteine
28f1276286
[2.0.x] Add Z_AFTER_PROBING option ( #10058 )
...
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
2018-03-11 13:07:55 -05:00
Scott Lahteine
dd19e74476
Cleanup trailing whitespace
...
@Bob-the-Kuhn — Please set your git options to remove trailing whitespace on commit.
2018-03-11 10:29:00 -05:00
Scott Lahteine
d0ac0151b6
Fix typo in ubl.prepare_segmented_line_to
2018-03-11 10:20:50 -05:00
Scott Lahteine
d385b9aac7
Auto-assign CS pins for X2, Y2, Z2 ( #10057 )
...
Fixes #9211
2018-03-11 08:56:13 -05:00
Scott Lahteine
bae1cb859c
Patch flush_and_request_resend for 1.1.x parity
2018-03-11 07:36:00 -05:00
Scott Lahteine
51ebdf3b7d
Finish scroll_screen with menu direction/multiplier
...
Fixes #10041
2018-03-11 04:41:12 -05:00
Bob-the-Kuhn
0d8c15c01f
restore PR 9661 files & V1 fix
2018-03-10 22:46:32 -06:00
Scott Lahteine
751785fc97
Followup to recent patches
...
- `M666` is static, not inline
- Disambiguate some stepper macros
2018-03-10 21:41:17 -06:00
Scott Lahteine
a0211f5d6c
Disambiguate else in stepper_indirection.h
2018-03-10 19:56:22 -06:00
Scott Lahteine
f003173752
Fixup M666
...
Followup to d6df032
2018-03-10 19:52:30 -06:00
Bob-the-Kuhn
bf59a4a6df
Revert "[2.0.x] DUE compatibility with shared SPI LCDs, USB mass storage, add pin defs & update examples\MakerParts\Configuration.h"
2018-03-10 17:22:20 -06:00
Sebastianv650
fd1d590726
[2.0.x] Silence M204 ( #10037 )
...
`M204` is often used by slicers to set acceleration depending on perimeter, infill, etc., so Marlin's answers are flooding the serial windows. Silence `M204` according to the philosophy that setter commands should only send a reply if no parameter is given.
2018-03-10 07:16:55 -06:00
Scott Lahteine
f10c87b442
Update Endstops class for 1.1.x parity
2018-03-10 06:57:31 -06:00
Scott Lahteine
d6df0322c2
Update M666 for XYZ dual endstops
2018-03-10 06:57:31 -06:00
Scott Lahteine
fbc41c0e98
Update Marlin G-code summary
2018-03-10 06:57:31 -06:00
Scott Lahteine
239902f861
Fix E2END and add EEPROM to Smart RAMPS
...
Reference #9983
2018-03-10 06:57:31 -06:00
Scott Lahteine
ddce486360
Merge pull request #10032 from thinkyhead/bf2_unknown_z_no_raise
...
[2.0.x] Add UNKNOWN_Z_NO_RAISE to prevent Z grinding
2018-03-10 00:57:30 -06:00
Scott Lahteine
79e6d890d5
Add UNKNOWN_Z_NO_RAISE to example configs
2018-03-10 00:17:34 -06:00
Scott Lahteine
419d12ca1b
Add UNKNOWN_Z_NO_RAISE option
...
With this option enabled, Z won't ever be raised until after `G28` has been completed, and it won't raise if Z becomes unknown. This is good for machines whose beds fall when Z is powered off.
2018-03-10 00:17:34 -06:00
Scott Lahteine
3b4c89e4b5
Move do_probe_raise closer to set_probe_deployed
...
…and limit the raise to Z_MAX_POS
2018-03-10 00:17:34 -06:00
Scott Lahteine
2908e76151
Fix position_is_reachable_by_probe typo, add comment
...
Fix #10029
2018-03-10 00:15:41 -06:00
Roxy-3D
26dc594ebb
prevent steppers from turning off during manual probes
2018-03-10 00:15:41 -06:00
Bob-the-Kuhn
d8eadf3796
fix ubl_G29.cpp Travis error
2018-03-09 23:59:30 -06:00
Bob-the-Kuhn
914bb80bde
removed SDSS init
...
added device & comm drivers for shared SPI LCDs
mistyped some updates in ultralcd_impl_DOGM.h
remove unwanted changes in onfiguration.h
still can't type
Update HAL_LCD_class_defines.h
include USB mass storage & misc
2018-03-09 23:06:11 -06:00
Scott Lahteine
6d9ea7e184
Fix position_is_reachable_by_probe typo, add comment
...
Fix #10029
2018-03-09 21:12:11 -06:00
Roxy-3D
646dd5554c
prevent steppers from turning off during manual probes
2018-03-09 17:56:00 -07:00
Scott Lahteine
161ff9ff35
Fix UPDATE_ENDSTOP for CorePQ compatibility
...
Fixes #9939
2018-03-09 08:54:48 -06:00
Scott Lahteine
49ca67202f
Patch configuration_store for extra serial port
...
Fix #9948
2018-03-09 07:42:27 -06:00
Scott Lahteine
cc59ac4603
Fix _tmc_say_axis string address
...
Fixes #10003
2018-03-09 06:10:11 -06:00
Scott Lahteine
16a8edc5f0
Add more delay before pulse off in Linear Advance ISR
...
A capital idea from https://github.com/MarlinFirmware/Marlin/pull/9914#issuecomment-371614153
2018-03-09 05:26:29 -06:00
Scott Lahteine
dfd5d2fe75
Have position_is_reachable_by_probe use the whole bed ( #10020 )
...
Previously `position_is_reachable_by_probe` was limited to the area specified for `G29` mesh leveling (even if leveling was disabled). This change will properly consider the entire bed area so that `G30` and other non-leveling probing may take place.
2018-03-09 03:37:30 -06:00
Bob-the-Kuhn
67a17446f2
Fix DUE incompatible enum type specification ( #10017 )
2018-03-09 02:17:57 -06:00
Bob-the-Kuhn
3c58ca181c
[2.0.x] Correct step pulse width on LPC1768, DUE & Teensy35_36 ( #10016 )
2018-03-09 02:11:28 -06:00
Scott Lahteine
e297748b22
Apply const, safe_delay in servo.*
2018-03-08 19:31:32 -06:00
Scott Lahteine
3c2bfa5e53
Update powersupply_on in power_on/off ( #10015 )
...
Fix #10004
2018-03-08 18:56:47 -06:00
Scott Lahteine
42608b1925
Init old_red to 127 to ensure initial change
...
Fix #10012
2018-03-08 18:28:33 -06:00
Scott Lahteine
317673fec3
Init watchdog last in setup()
2018-03-08 17:34:50 -06:00
Scott Lahteine
8d32fd997f
Wrap NORM_E_DIR/REV_E_DIR macros in do{}while(0)
2018-03-08 16:20:24 -06:00
Scott Lahteine
1913c37a91
Tweak to manual move eindex arg
2018-03-08 16:20:24 -06:00
Scott Lahteine
98d48fc731
Followup to HAL_timer_restrain
...
Followup to #9985
2018-03-07 22:18:37 -06:00
Scott Lahteine
03e3011332
Fix compile error with MAX_MESSAGE_LENGTH
...
Fix #9988
2018-03-07 21:57:01 -06:00
Bob-the-Kuhn
6b4a928145
2uS default step pulse ( #9989 )
2018-03-07 21:11:01 -06:00
Scott Lahteine
ca577c1638
Fix up various spacing, comments, and typos
2018-03-07 21:09:08 -06:00
Scott Lahteine
d45f19d385
Remove Unicode from var name
2018-03-07 19:08:44 -06:00
Scott Lahteine
224688cc3b
Fix for unicode-ignorant gcc preprocessor
2018-03-07 18:34:07 -06:00
Chris Pepper
a1a88ebabc
HAL function to ensure min stepper interrupt interval ( #9985 )
2018-03-07 17:53:25 -06:00
Scott Lahteine
be0e100fed
Fix sd subdirectory encoder position
...
Followup to 7e386c7
2018-03-07 16:54:19 -06:00
Bob-the-Kuhn
04dedc7ed8
always completely initialize display ( #9981 )
2018-03-07 16:40:59 -06:00
Scott Lahteine
0149680f54
Fix compile error with char LCD
2018-03-07 16:25:37 -06:00
Scott Lahteine
9515e5aefb
Fix LA_active_extruder (static)
2018-03-07 05:49:20 -06:00
Scott Lahteine
e5ec793f7e
Wrap stepper indirection macros
2018-03-07 05:42:45 -06:00
Sebastianv650
5b85464791
Fix for LA ( #9964 )
...
Missed in the original LA 1.5 PR: eISR has to use a local copy of
current_block->use_advance_lead because it might still run wenn the last
block has been set to NULL.
2018-03-07 05:33:13 -06:00
Scott Lahteine
7e386c7e98
Fix encoder position for sddirectory
2018-03-07 05:23:03 -06:00
Scott Lahteine
1d604be671
Suspend auto-report during UBL map output
2018-03-07 02:00:19 -06:00
Scott Lahteine
eb212ae073
Add suspend_auto_report flag to suppress auto-report
2018-03-07 01:57:09 -06:00
Scott Lahteine
ffbf63e6af
Add HAS_TEMP_SENSOR conditional
2018-03-07 01:53:50 -06:00
Scott Lahteine
94f5204629
Move AUTO_REPORT_SD_STATUS to SDSUPPORT block
2018-03-07 01:50:30 -06:00
Scott Lahteine
22a017a856
Rebuild SD file sort array on Stop SD Print ( #9976 )
...
Thanks Chuck Hellebuyck.
2018-03-07 01:42:11 -06:00
Scott Lahteine
920d92aa46
Merge pull request #9974 from thinkyhead/bf2_tmc_util_progmem
...
[2.0.x] Move tmc_util.* extended_axis_codes to PROGMEM
2018-03-07 00:16:50 -06:00
Scott Lahteine
b198b49d15
Followup to AUTO_REPORT_SD_STATUS
...
Followup to #9832
2018-03-07 00:13:42 -06:00
Scott Lahteine
2057177184
Make enums into implicit char
2018-03-06 23:39:56 -06:00
Scott Lahteine
e28e3bb532
Move extended_axis_codes to PROGMEM
2018-03-06 22:21:24 -06:00
Scott Lahteine
ca0def766e
LIN_ADVANCE single stepper optimization
2018-03-06 19:26:54 -06:00
Scott Lahteine
8291ae34f2
Support duplication mode in LIN_ADVANCE
2018-03-06 19:12:23 -06:00
Scott Lahteine
b08ec22fe1
Show E0-E4 in monitor_tmc_driver output ( #9969 )
...
Fix #9966
2018-03-06 19:01:07 -06:00
Marcio Teixeira
fd883c909a
Improvements to Lightweight ST7920 status screen. ( #9952 )
...
- Show units on lightweight status screen.
- Fixed progress bar so it works with M73
2018-03-06 01:49:36 -06:00
Scott Lahteine
0dd1c4458d
Put more code between pulse start and stop ( #9959 )
2018-03-05 23:06:57 -06:00
Scott Lahteine
f9cafc4001
Fix menu highlight glitch, tweak scrolling code ( #9957 )
2018-03-05 23:05:15 -06:00
Scott Lahteine
bf9fc8ac0e
M851 - report only without parameters
2018-03-05 02:11:50 -06:00
Scott Lahteine
eb867817b5
Prevent filament runout false positives ( #9946 )
2018-03-05 01:49:30 -06:00
Scott Lahteine
36262a0479
Use static classes for job timers ( #9938 )
2018-03-04 21:23:43 -06:00
Scott Lahteine
930720bbbb
Fix broken reverse planner ( #9943 )
...
From #9914 by @Sebastianv650
2018-03-04 21:19:06 -06:00
Bob-the-Kuhn
025118da3e
Init print_job_timer in setup() instead of "early" ( #9937 )
2018-03-04 16:23:44 -06:00
Scott Lahteine
beeed580b8
Implement digipots for MKS SBASE ( #9927 )
...
Fix #9477
2018-03-04 15:14:47 -06:00
Scott Lahteine
07ae23fe14
No pulse delay on last e_steps in advance isr
2018-03-04 15:06:31 -06:00
Scott Lahteine
881529a401
Fix #9904 - toDigital should show 00-99 hours
2018-03-04 04:34:39 -06:00
Scott Lahteine
ed758de80d
tweak comment in stepper.cpp
2018-03-04 04:03:23 -06:00
Scott Lahteine
d1dc863962
autotemp_factor is not value_celsius_diff
...
See https://github.com/MarlinFirmware/Marlin/issues/9852#issuecomment-369861822
2018-03-03 23:27:54 -06:00
Thomas Moore
f3914a432e
Clear retracted status when homing the Z axis
2018-03-03 23:18:40 -06:00
Scott Lahteine
6d7f4f84e2
Add board MKS_BASE_HEROIC ( #9926 )
...
Followup to #9008
- Don't define micro-stepping pins for boards that lack them.
- Allow setting of 128 microsteps with `M350`.
2018-03-03 23:14:52 -06:00
Scott Lahteine
649f375494
Fix: M112 calling kill from interrupt ( #9923 )
...
Fix #9906
2018-03-03 23:14:01 -06:00
Scott Lahteine
c37b3f995a
Sanity-check some graphical LCD-only options
2018-03-03 20:31:59 -06:00
Scott Lahteine
a2a672449a
Updated boot screen description
2018-03-03 20:04:17 -06:00
Scott Lahteine
61620cbd15
Tweak M211
2018-03-02 02:20:40 -06:00
Scott Lahteine
6e08ddce6e
Correct M401 / M402 description
2018-03-01 19:10:36 -06:00
Studiodyne
23a576faf7
[2.0] Fix for FW retract ( #9878 )
2018-03-01 15:15:40 -06:00
Ben Lye
461c8ef834
Fix DIGITAL_PIN_TO_ANALOG_PIN macro for Atmega1284p ( #9881 )
2018-03-01 15:13:57 -06:00
Scott Lahteine
88b6a15b47
Update M900 verbiage
2018-03-01 15:11:31 -06:00
Ben Lye
e2df286444
Update pinsDebug.h ( #9874 )
...
Fix display of analog input value.
2018-03-01 04:51:36 -06:00
Scott Lahteine
91db7930dc
Drop SCARA_FEEDRATE_SCALING
...
The updated planner takes the length of the move, so this pre-calculation is no longer needed.
2018-03-01 04:30:41 -06:00
Bob-the-Kuhn
c1f4112bdc
[2.0.x] Add 1284 support & misc. bug fixes ( #9864 )
2018-03-01 03:07:39 -06:00
Scott Lahteine
118899357d
Add sanity checks to Linear Advance 1.5 ( #9873 )
2018-03-01 02:10:43 -06:00
Scott Lahteine
1746749361
Followup to #9868
2018-03-01 01:53:12 -06:00
Scott Lahteine
a446433c87
Fix SENSORLESS_HOMING for Core Kinematics ( #9868 )
2018-03-01 01:37:31 -06:00
Scott Lahteine
2d1233b86c
Fix lcd_quick_feedback call for BTN_BACK
2018-02-28 20:24:11 -06:00
AnHardt
eb8b758226
Fix some mapper, charsize problems ( #9866 )
2018-02-28 18:57:05 -06:00
Scott Lahteine
8bffb26c23
Fix manual move position display
...
Manual moves now correctly include the workspace offset.
2018-02-28 17:33:23 -06:00
Scott Lahteine
8c03ce4d80
Fix Z safe homing sanity check for no probe
...
Fix #9851
2018-02-28 05:28:35 -06:00
Scott Lahteine
c471389afb
Add Einsy Rambo pins ( #9850 )
2018-02-28 04:16:12 -06:00
Zachary Hill
c22f8dd660
Get duration_t in printcounter.h for its clients ( #9843 )
2018-02-28 04:15:29 -06:00
Scott Lahteine
24b9c1923f
ubl G29 tweaks
2018-02-28 03:40:06 -06:00
Scott Lahteine
bd0967ad87
Fix BTN_BACK
...
Followup to #9835
2018-02-28 03:26:28 -06:00
Scott Lahteine
d9a98b5814
Russian language update
...
From #9849
2018-02-28 03:07:39 -06:00
Ben Lye
461cb22069
Fix Zonestar / ADC keypad with RAMPS. ( #9840 )
2018-02-28 00:07:50 -06:00
Scott Lahteine
35ec67885a
Add support for BACK button (RADDS) ( #9835 )
2018-02-26 22:52:57 -06:00
Scott Lahteine
0bc4c216ac
Patch up pinsDebug pins
2018-02-26 19:32:48 -06:00
Scott Lahteine
cd7dc49527
Fix CR-10 status screen missing commas
...
Fix #9660
2018-02-26 15:52:50 -06:00
geigerg
4817c78a65
Add files via upload ( #9828 )
2018-02-26 15:44:01 -06:00
TheSFReader
eb079959fb
Report sd card progress [FR] #9751 ( #9832 )
...
* SD Status auto-report feature
Feature Request #9751
2018-02-26 15:38:27 -06:00
Scott Lahteine
7bdb98c946
Fix #9826 . Solution by @gloomyandy
2018-02-26 15:02:19 -06:00
Scott Lahteine
02474a321a
Fix SDSUPPORT (and indentation)
...
Based on https://github.com/MarlinFirmware/Marlin/issues/8746#issuecomment-368471901 by @benlye
2018-02-26 14:40:40 -06:00
Scott Lahteine
cfdcf91df5
Fix compile error with initTone
2018-02-26 01:49:48 -06:00
Scott Lahteine
ae1a2ff16f
Pins parity with 1.1.x
2018-02-26 01:17:50 -06:00
Roxy-3D
306f44198e
Prevent serial buffer overrun in Pronterface
...
75ms might be excessive... But I know people are seeing problems with PronterFace as the client...
2018-02-25 23:50:44 -06:00
Scott Lahteine
966d9af98a
Mesh export in Bilinear + UBL M503
2018-02-25 23:25:39 -06:00
Scott Lahteine
8d5a77001e
EEPROM parity with 1.1.x
2018-02-25 23:03:09 -06:00
Scott Lahteine
2228dff3ea
ubl.h compile flags from 1.1.x
2018-02-25 23:03:08 -06:00
Sebastianv650
cb4cb86d80
Useless line removed ( #9814 )
...
nextAdvanceISR is set in the next if structure in every possible
situation, so it's useless to set it once more before.
2018-02-25 21:20:37 -06:00
Scott Lahteine
f2c0ed193d
Add tone support for Due ( #9807 )
2018-02-25 10:48:14 -06:00
Scott Lahteine
0557ab5780
Fix CONFIG_ECHO_START bug
...
In reference to #9633
2018-02-25 05:34:52 -06:00
Scott Lahteine
61688233c7
HAL style tweak
2018-02-25 05:00:44 -06:00
Scott Lahteine
19ba91f77a
Fix lcd_custom_bootscreen compiler warning
2018-02-25 04:38:17 -06:00
Scott Lahteine
f3dbe19669
Tweaks to HAL codestyle
2018-02-25 04:38:17 -06:00
Scott Lahteine
54c65fc3cb
Standardize LCD buzz defaults
2018-02-24 22:58:22 -06:00
Scott Lahteine
4953fb1c88
Standardize encoder defaults
2018-02-24 22:34:45 -06:00
Scott Lahteine
078627f805
[2.0.x] Creality Ender-4 configuration ( #9803 )
...
* Move Creality Ender-2 configurations
* Add Creality Ender-4 configurations
2018-02-24 22:11:11 -06:00
Scott Lahteine
5684beae90
Bring some configs up to speed
2018-02-24 21:56:27 -06:00
UtterlyD
813f9f3082
[bugfix_2.0.x] - LIN_ADVANCE V1.5 stepper.cpp ( #9797 )
...
Removal of obsolete (i) from port of LIN_ADVANCE from V1.1.x to V2..0.x.
2018-02-24 16:37:23 -06:00
Scott Lahteine
3f89bbeab5
Drop a conditional only used once
2018-02-24 16:35:31 -06:00
Scott Lahteine
689bc99402
Correction to acceleration
2018-02-24 11:09:36 -06:00
Roxy-3D
92c8efdc96
Change Folger Tech i3-2020 defaults
2018-02-24 10:29:24 -06:00
Scott Lahteine
2024775e07
Spanish (UTF8) Language ( #9786 )
...
From #7314 by @MrAmericanMike
2018-02-23 20:24:02 -06:00
Scott Lahteine
43ff15244d
Fix a progress bar condition
2018-02-23 19:43:44 -06:00
Scott Lahteine
b8485528b2
Prettify LCD_PROGRESS_BAR options
2018-02-23 19:19:57 -06:00
Zachary Hill
4d588b2d6a
Further fix of LCD_PROGRESS_BAR ( #9783 )
2018-02-23 18:53:04 -06:00
Scott Lahteine
e0227f2110
Fix *_CS_PIN for RAMPS_FD
...
Fix #9778
2018-02-23 14:29:57 -06:00
Scott Lahteine
e65a853c59
Fix LCD_PROGRESS_BAR
...
Fix #9208
2018-02-23 14:05:10 -06:00
Scott Lahteine
07d7e8aa1b
Merge pull request #9775 from thinkyhead/bf2_g28_restore_leveling
...
[2.0.x] Add RESTORE_LEVELING_AFTER_G28 option
2018-02-23 13:43:22 -06:00
Scott Lahteine
e749945317
Un-pause print on cancel ( #9780 )
2018-02-23 13:42:15 -06:00
Scott Lahteine
17d984eab3
Add RESTORE_LEVELING_AFTER_G28 to example configs
2018-02-23 13:38:54 -06:00
Scott Lahteine
b2cf253a13
Add RESTORE_LEVELING_AFTER_G28 option
2018-02-23 13:38:54 -06:00
Scott Lahteine
65519263f4
Fix broken LEVEL_BED_CORNERS
...
Fix #8805
2018-02-23 09:13:34 -06:00
Scott Lahteine
8f9262f3fe
Fix path to _Statusscreen.h
2018-02-23 09:06:06 -06:00
Scott Lahteine
007c56f453
Fix HAL_STM32F1/endstop_interrupts.h
...
In response to https://github.com/MarlinFirmware/Marlin/issues/7076#issuecomment-367556982
2018-02-23 02:07:34 -06:00
Scott Lahteine
0542b03750
Fix bootscreen include path
...
Fix #9759
2018-02-23 01:59:35 -06:00
Scott Lahteine
2bd252b501
[2.0.x] LIN_ADVANCE v1.5 ( #9712 )
2018-02-23 00:53:29 -06:00
Scott Lahteine
90fa423737
Preliminary cleanup of #include structure ( #9763 )
2018-02-23 00:52:52 -06:00
Scott Lahteine
a6b7e721cf
Slovak language update
2018-02-23 00:49:07 -06:00
Scott Lahteine
2c9775313a
Fix Z position on HD44780
...
Fix #9732
2018-02-23 00:42:42 -06:00
Studiodyne
9c9cd54ef3
Add Z Fade Height edit to UBL and Tune submenus ( #9738 )
2018-02-23 00:29:58 -06:00
Scott Lahteine
3851ffce0f
Merge pull request #9637 from marcio-ao/pr-lite-st7920-status
...
[2.0.x] Light-weight status screen for ST7920 based printers
2018-02-22 23:55:02 -06:00
Scott Lahteine
5f8b2c2ff0
More descriptive environment error message
2018-02-22 23:34:49 -06:00
Scott Lahteine
b17982bde9
Merge pull request #9769 from teemuatlut/bf2_compile_fixes
...
[2.0.x] Fix compiling with M600 and runout sensor
2018-02-22 22:52:31 -06:00
Scott Lahteine
799e3b2b40
LPC1768 HAL formatting/comments
2018-02-22 14:36:17 -06:00
teemuatlut
5968a3e60e
Add ADVANCED_PAUSE_FEATURE include
2018-02-22 20:28:46 +02:00
teemuatlut
93cc3a8492
Make used methods public
2018-02-22 20:26:14 +02:00
Marcio Teixeira
13176dfe2f
Merge remote-tracking branch 'origin/pr-lite-st7920-status' into pr-lite-st7920-status
2018-02-22 08:02:31 -07:00
Scott Lahteine
424b9a83cd
Slovak language update
...
From @rmoravcik at #9760
2018-02-22 03:00:47 -06:00
Scott Lahteine
e75ccfd727
Hatchbox Alpha Config with E3Dv6 ( #9762 )
2018-02-22 02:57:48 -06:00
Scott Lahteine
556abc0888
Add LIGHTWEIGHT_UI to example configs
2018-02-22 00:10:43 -06:00
Marcio Teixeira
532bb3aaa1
Lightweight status screen for ST7920
...
- This status screen uses the ST7920 character generator to greatly
reduce SPI traffic and MCU load when updating the status screen.
- Has been tested with the RepRapDiscount Full Graphics Smart Controller
but should work with any LCD that uses an ST7920 or fully compatible
controller.
2018-02-22 00:10:43 -06:00
Scott Lahteine
59c98d6fd5
Hephestos2 heated bed kit for all ( #9757 )
2018-02-21 22:27:09 -06:00
Scott Lahteine
8c1a82c327
Merge pull request #9753 from ldkraemer/BF2CR-10Bootscr
...
[2.0.x] Creality CR-10mini configuration
2018-02-21 20:29:36 -06:00
Scott Lahteine
72f63a4980
Fix DOGM progress bar with LCD_SET_PROGRESS_MANUALLY
2018-02-21 19:47:04 -06:00
ldkraemer
6c3162f9c6
Add CR-10 Mini configuration
2018-02-21 19:08:42 -06:00
ldkraemer
4431f4deb8
Add CR-10S _Bootscreen.h
2018-02-21 18:55:14 -06:00
Marcio Teixeira
e7f329edb2
Added bed corners to bed icon.
...
- This makes it look less like a dash (idea stolen from cjsoong).
2018-02-21 15:31:56 -07:00
Marcio Teixeira
e84a5545e1
Removed unnecessary extended mode switch.
...
- This will slightly reduce the SPI requirements for
updating the progress bar.
2018-02-21 15:12:11 -07:00
Scott Lahteine
343c17d5b3
Reduce Creality3D bootscreens flash usage ( #9752 )
2018-02-21 16:08:52 -06:00
Scott Lahteine
63bc6ade4f
Fix pinsDebug compile error
2018-02-21 14:28:58 -06:00
Roxy-3D
d504bbbfa4
Fix botched check for being off the mesh...
2018-02-21 14:28:58 -06:00
Marcio Teixeira
716a22498f
Changed temp type from uint8_t to int16_t
...
- Also deleted old implementation files which had been renamed.
2018-02-21 10:15:55 -07:00
Scott Lahteine
7d8c6b3f3c
Add 20x4 option for Sainsmart LCD ( #9740 )
2018-02-21 00:46:25 -06:00
Scott Lahteine
1d7f5be0ff
quick_home_xy sensorless homing
2018-02-20 20:52:48 -06:00
Scott Lahteine
eb182c08af
Merge pull request #9733 from thinkyhead/bf2_random_fixup_branch
...
[2.0.x] Drop HAL_timer_set_count
2018-02-20 17:03:18 -06:00
Kevin
03b48df7bb
RADDS: Add EEPROM Size ( #9737 )
...
needed for UBL
2018-02-20 16:24:29 -06:00
Scott Lahteine
9f0907d40c
Fix big edit font width calculation
...
Fix #9685
2018-02-20 16:24:23 -06:00
Marcio Teixeira
9d5968e8ec
Fixed dual-extruder in Lightweight UI.
...
- Moved bed icon down when the machine is configured with two nozzles.
2018-02-20 13:34:34 -07:00
Scott Lahteine
4303f2e377
Fix MALYAN_LCD message bugs
...
Fix #9711
Replacing #9731
2018-02-20 05:40:19 -06:00
Scott Lahteine
12c5fdfdb5
Fix CYCLES_PER_MICROSECOND conflict on STM32F1
2018-02-20 03:10:39 -06:00
Scott Lahteine
a810e585db
Drop HAL_timer_set_count
2018-02-20 03:10:39 -06:00
Bob-the-Kuhn
a823b801b8
Merge pull request #9729 from Bob-the-Kuhn/U8G-compile-error-2.0.x
...
[2.0.x] Move #include <U8glib.h> in ultralcd_st7920_u8glib_rrd_AVR.cpp (fix bug introduced in PR #9624 )
2018-02-19 18:36:23 -06:00
Bob-the-Kuhn
47d529aac5
move #include <U8glib.h>
2018-02-19 17:39:40 -06:00
Marcio Teixeira
aada1e698f
Removed unused configuration options.
2018-02-19 16:14:33 -07:00
Marcio Teixeira
c7513eb032
Merge branch 'pr-lite-st7920-status' of github.com:marcio-ao/Marlin into pr-lite-st7920-status
2018-02-19 15:38:13 -07:00
Scott Lahteine
73cd34b121
Finish AUTO_POWER_CONTROL implementation
...
Followup to #9503
2018-02-19 16:12:04 -06:00
Scott Lahteine
fc460fff94
Extend menu items for SWITCHING_EXTRUDER
...
Reference #5367
2018-02-19 11:12:42 -06:00
Scott Lahteine
c4ec01d59b
Conditionals for SWITCHING_EXTRUDER
...
In reference to #5367 . SWITCHING_EXTRUDER was not fully implemented for EXTRUDERS > 2.
2018-02-19 10:59:47 -06:00
Scott Lahteine
d4e4fe40e0
Add SENSORLESS_HOMING delay to quick_home_xy
...
Fix #9471
2018-02-19 10:12:16 -06:00
Scott Lahteine
25e3e62354
Null-terminate lcd_status_message
2018-02-19 10:12:16 -06:00
Scott Lahteine
a11fcd46a2
Merge pull request #9699 from Studiodyne/Studiodyne-filamentMulti
...
[2.0.x] Support multiple filament runout sensors
2018-02-19 08:42:39 -06:00
Scott Lahteine
b3deadd898
Don't raise FIX_MOUNTED_PROBE on stow
...
Reference #9336
2018-02-19 08:36:43 -06:00
Scott Lahteine
a74cece6d0
CR-10 Bootscreen
...
From @plainpylut in #9660
2018-02-19 08:07:08 -06:00
Scott Lahteine
8733d5a296
Add NUM_RUNOUT_SENSORS to example configs
2018-02-19 07:02:50 -06:00
Studiodyne
d3ca82d8c2
Support for multiple filament runout sensors
2018-02-19 07:02:50 -06:00
Scott Lahteine
0106c3e476
Style tweak in MarlinSerialUSB_Due.h
2018-02-19 06:58:26 -06:00
Scott Lahteine
3d1692d1fd
Fix X2 enable with X_DUAL_STEPPER_DRIVERS
...
From #9286
2018-02-18 22:50:47 -06:00
Scott Lahteine
c241da32e8
stepper.h parity with 1.1.x
2018-02-18 22:50:38 -06:00
Scott Lahteine
3af988a7f3
Add sensorless homing delay to home_z_safely
...
Based on #9705
2018-02-18 19:28:40 -06:00
Scott Lahteine
ca55f2927a
Pulldown pin mode support ( #9701 )
...
Implemented for LPC1768.
2018-02-18 19:26:23 -06:00
Scott Lahteine
aef9e036bf
More overridable FIL_RUNOUT_PIN
2018-02-18 04:43:15 -06:00
Scott Lahteine
79272f98fc
Proposed changes to ST7920 lightweight status screen
2018-02-18 02:47:31 -06:00
Marcio Teixeira
24eb275b99
Added a light-weight status screen for the ST7920
...
- The status screen uses the ST7920 character generator to greatly
reduce SPI traffic and MCU load when updating the status screen.
- Has been tested with the RepRapDiscount Full Graphics Smart Controller
but should work with any LCD that uses an ST7920 or fully compatible
controller.
2018-02-18 02:29:45 -06:00
Scott Lahteine
a6563df705
Sync pinsDebug_list.h between 1.1.x and 2.0.x ( #9693 )
2018-02-18 02:25:32 -06:00
Scott Lahteine
bab0e975c8
The ENDER can use BOARD_MELZI_CREALITY ( #9692 )
2018-02-18 02:24:39 -06:00
Scott Lahteine
83d7e95de0
Add MSG_THERMAL_RUNAWAY_BED ( #9691 )
2018-02-18 02:23:55 -06:00
Scott Lahteine
8ffa0b24a4
Strip excess G28 debug logging
2018-02-18 01:11:41 -06:00
Kevin
9019ea0fce
Option to force X or Y to home first when homing the other axis
2018-02-18 01:11:41 -06:00
Scott Lahteine
60fc372211
Add CODEPENDENT_XY_HOMING to example configs
2018-02-18 00:46:04 -06:00
Scott Lahteine
da7c51d820
Space out some pins lines
2018-02-17 22:53:58 -06:00
Bob-the-Kuhn
e05673a379
[2.0.x] VIKI2 & RE_ARM changes ( #9686 )
...
* VIKI2 & RE_ARM changes
1. Remove `DISABLED(SDSUPPORT)` from ST7565 in `ultralcd_impl_DOGM.h`. These LCDs share pins with the SD card and can run at the SD card rates.
2. Add SDSS definition to `pins_RAMPS_RE_ARM.h`. Apparently the SDSS definition in `pins.h` is being processed before the one in `spi_pins.h` which resulted in not being able to read the SD card.
2018-02-17 16:41:36 -06:00
Scott Lahteine
7a381366aa
Merge pull request #9208 from benlye/benlye-m73
...
[2.0.x] Allow M73 without SDSUPPORT
2018-02-17 15:50:11 -06:00
Scott Lahteine
7d093edc18
Add Tronxy XY100 configuration
...
Based on #9674
2018-02-17 15:48:32 -06:00
Scott Lahteine
472229b974
Fix #9681
2018-02-17 08:28:12 -06:00
Scott Lahteine
f6cc89ec7c
LCD_PROGRESS_BAR w/out SDSUPPORT for character LCD
2018-02-17 08:17:22 -06:00
blye
330437ad7c
Update LCD_SET_PROGRESS_MANUALLY in configs
2018-02-17 08:12:10 -06:00
blye
168af8bacb
Allow LCD_SET_PROGRESS_MANUALLY without SDSUPPORT
2018-02-17 07:54:24 -06:00
Scott Lahteine
bf5df306e1
Fix compile error with SHOW_BOOTSCREEN disabled
...
Fix #9530
Fix #9524
2018-02-17 00:52:08 -06:00
Scott Lahteine
3021058e6d
Fix non-UTF8 Czech language
2018-02-16 22:23:29 -06:00
Scott Lahteine
bd54ce830a
Include utility.h in neopixel.cpp
2018-02-16 22:19:34 -06:00
Scott Lahteine
ff90cb409e
No space for E2 with ReARM+RAMPS
...
Addressing #9474
2018-02-16 21:37:26 -06:00
Scott Lahteine
d7f82c8ddf
Drop extra avr/pgmspace include in _Bootscreen.h
...
Addressing #9441
2018-02-16 18:36:35 -06:00
Scott Lahteine
1bf2b1e475
Use serial macro in sd_mmc_spi_mem.cpp for Due
2018-02-16 17:57:24 -06:00
Scott Lahteine
241e55ef3b
Apply SERIAL_FLUSH macro
2018-02-16 17:32:12 -06:00
Scott Lahteine
1f8f8c9104
Merge pull request #9657 from petrzjunior/bugfix-2.0.x
...
[2.0.x][Language] Update Czech (Advanced pause...)
2018-02-16 02:54:06 -06:00
Thomas Moore
cff62042ee
Fix LCD manual movement on kinematic machines ( #9655 )
2018-02-16 02:34:36 -06:00
teemuatlut
749bc42aa9
TMC SGT is int8 ( #9651 )
2018-02-16 02:19:33 -06:00
Bob-the-Kuhn
2d749d490b
Fix / complete USE_CONTROLLER_FAN ( #9666 )
2018-02-16 02:18:50 -06:00
Scott Lahteine
08d685c97a
Followup to 21e60fd
2018-02-16 02:09:17 -06:00
Scott Lahteine
c49844df66
!ENABLED => DISABLED
2018-02-16 01:51:34 -06:00
Scott Lahteine
304e0f8945
Followup to 21e60fd
...
`ENABLED` only works for flag-type options. Floats must use `#ifdef`.
2018-02-15 22:24:23 -06:00
Scott Lahteine
6a70a4fbb3
Fix G26 circles ( #9627 )
...
Easier to configure. Catch an odd divisor.
2018-02-15 22:11:26 -06:00
Bob-the-Kuhn
349dafa728
config update (set to -1)
2018-02-15 21:42:54 -06:00
Roxy-3D
21e60fd3ed
Allow user to control Z-Height correction for off mesh movements ( #9661 )
2018-02-15 15:07:42 -06:00
Petr Zahradník
5d9e16ea49
Update Czech advanced pause
2018-02-15 20:22:22 +01:00
Roxy-3D
c78e1c0f23
Fix G26 Circles... ( #9641 )
...
* Fix G26 Circles...
2018-02-15 11:15:15 -06:00
Bob-the-Kuhn
b648999528
Merge pull request #9624 from Bob-the-Kuhn/RRD-8-bit-code-to-2.0.x
...
[2.0.x] Add delays to AVR driver for RRD Full Graphic Smart Controller
2018-02-14 22:43:17 -06:00
Marcio Teixeira
8db67d1647
Fixed compilation when using avr-gcc
...
- avr-gcc is more strict than the Arduino IDE, it seems.
2018-02-14 15:51:25 -07:00
Marcio Teixeira
f05bd7f082
Added files missing from earlier commit.
2018-02-14 14:51:35 -07:00
Marcio Teixeira
4880ac6533
Added a light-weight status screen for the ST7920
...
- The status screen uses the ST7920 character generator to greatly
reduce SPI traffic and MCU load when updating the status screen.
- Has been tested with the RepRapDiscount Full Graphics Smart Controller
but should work with any LCD that uses an ST7920 or fully compatible
controller.
2018-02-14 14:43:54 -07:00
Roxy-3D
3d74ff3c87
Cartesian UBL systems should not use SEGMENT_LEVELED_MOVES
...
There is significant downside to breaking up the long line segments on UBL Cartesian machines. It adds a lot of extra computation but worse... It cuts out all of UBL's off mesh Z-Height correction checks. There have been a large number of people complaining about the nozzle going to infinity or crashing into the bed lately. They are being caused by
```
void unified_bed_leveling::line_to_destination_cartesian()
```
not watching over the segments being queued up for movement.
2018-02-14 14:16:12 -06:00
Scott Lahteine
5dc04c5201
Fix #9361
2018-02-14 07:48:20 -06:00
AnHardt
133b38b93b
Complete M48 description ( #9631 )
2018-02-14 05:17:58 -06:00
Scott Lahteine
93c0198b2d
Init LCD welcome message programmatically
2018-02-14 05:09:44 -06:00
Scott Lahteine
67a4cc610b
French update
...
Based on #9610
2018-02-14 04:15:47 -06:00
Scott Lahteine
e7b50c89b0
Fix #9201
...
FILAMENT_LCD_DISPLAY can work with SDSUPPORT
2018-02-14 03:29:47 -06:00
Scott Lahteine
8d71ad37cb
flush comment to match 1.1.x
2018-02-14 02:56:18 -06:00
Scott Lahteine
272f132b82
Remove stray ` from STM32F1 HAL
...
As noted in #8585
2018-02-14 01:06:37 -06:00
Scott Lahteine
5b70d3da1c
Update DIGIPOT_I2C_MOTOR_CURRENTS comments
2018-02-13 22:54:12 -06:00
Scott Lahteine
2ec65051fd
Fix serial comment sp.
2018-02-13 22:40:56 -06:00
Bob-the-Kuhn
9a423e9a89
tested
2018-02-13 21:59:18 -06:00
Scott Lahteine
d741bcf8a9
Tweak boards spacing
2018-02-13 03:49:28 -06:00
Scott Lahteine
f8912bb19f
French update
...
Based on #9590 by @studiodyne
2018-02-12 01:07:47 -06:00
Scott Lahteine
e6b8207b03
Restore welcome message
2018-02-12 01:02:30 -06:00
Scott Lahteine
89165326b4
Cleanup after vim and vigor
2018-02-11 06:07:30 -06:00
Scott Lahteine
423bf9955e
Set Megatronics baud rate to 115200
...
Fix #9092
2018-02-11 03:43:36 -06:00
Scott Lahteine
377108619b
Fix plan_arc clockwise (G2)
...
Fix #9482
2018-02-11 03:34:25 -06:00
Scott Lahteine
378867d894
Update PB Rev.F pins
2018-02-11 01:45:37 -06:00
Scott Lahteine
8e0c107545
Have Kossel Pro use Z_MIN_PROBE_ENDSTOP ( #9586 )
2018-02-11 01:41:40 -06:00
Scott Lahteine
03d790451f
[2.0.x] HAL timer set/get count => set/get compare ( #9581 )
...
To reduce confusion over the current timer count vs. the compare (aka "top") value. Caution: this re-uses the function name, changing its meaning.
2018-02-10 20:42:00 -06:00
Scott Lahteine
7a4029d1b1
Correct MOTHERBOARD for Geeetech i3 Pro X
2018-02-10 20:29:29 -06:00
Scott Lahteine
451fb16f9b
Fix CYCLES_PER_MICROSECOND conflict
2018-02-10 20:08:48 -06:00
Scott Lahteine
3e384b60ce
Malyan M200 fix E0_AUTO_FAN_PIN ( #9580 )
...
Fixes #8794
2018-02-10 20:04:09 -06:00
Scott Lahteine
33752de12d
Update some outdated configs
2018-02-10 19:48:16 -06:00
Scott Lahteine
38c7d53bf7
Repair some spacing
2018-02-10 19:33:26 -06:00
Scott Lahteine
e3043d7ac7
Fix #8744
2018-02-10 16:54:42 -06:00
Scott Lahteine
d3ddd5ffaa
Merge pull request #9576 from thinkyhead/bf2_more_tests
...
[2.0.x] Fix Power class
2018-02-10 16:43:55 -06:00
Scott Lahteine
7280fa1e31
Patch Power class
2018-02-10 15:41:18 -06:00
Scott Lahteine
4aff6c1c32
Tronxy X5S pins and configuration
2018-02-10 15:07:04 -06:00
Scott Lahteine
05aa75cecf
Melzi boards use melzi pins
2018-02-10 14:44:14 -06:00
gege2b
5785bbb491
Updated french translation ( #9556 )
2018-02-10 14:15:41 -06:00
GMagician
299606e4ae
[2.0.x] Memory overflow protection ( #9562 )
2018-02-10 14:14:34 -06:00
teemuatlut
5990266724
Init CS pins before loading settings ( #9566 )
2018-02-10 14:08:53 -06:00
teemuatlut
d3fdb44ad8
Update TMC section with SW SPI pins ( #9554 )
2018-02-09 22:54:34 -06:00
Scott Lahteine
3168f0e646
Merge pull request #9549 from thinkyhead/bf2_prevent_comments_resetting
...
[2.0.x] Prevent watchdog reset due to many comments
2018-02-09 07:13:26 -06:00
Scott Lahteine
9be6aa3f79
Merge pull request #9544 from thinkyhead/bf2_reliable_probe_heaters_off
...
[2.0.x] More reliable PROBING_HEATERS_OFF with BED_LIMIT_SWITCHING
2018-02-09 07:12:29 -06:00
Scott Lahteine
c0dd9ef9f2
Support for AnyCubic TriGorilla board ( #9551 )
2018-02-09 05:41:52 -06:00
Scott Lahteine
da693a636e
Fix handling of escapes in serial input
2018-02-09 05:19:33 -06:00
Scott Lahteine
cc9cef7f7a
Fix HAS_CONTROLLER_FAN in is_power_needed
2018-02-09 05:19:33 -06:00
Scott Lahteine
112917cfef
No EXTRUDER_RUNOUT_PREVENT during print
2018-02-09 05:19:33 -06:00
Scott Lahteine
c30a8067ab
Prevent watchdog reset due to many comments
...
Addressing #7449
2018-02-09 05:19:33 -06:00
Scott Lahteine
b7053156fe
Minor comment/condition cleanup
2018-02-09 01:53:35 -06:00
Scott Lahteine
f64d300cfd
Sanity check SERIAL_PORT
...
Addressing #7400
2018-02-09 00:44:15 -06:00
Scott Lahteine
5a70887467
Size lcd_status_message based on language ( #9545 )
2018-02-08 23:03:47 -06:00
Scott Lahteine
545cd8fa60
Tweak malyanlcd.cpp
2018-02-08 22:00:23 -06:00
Scott Lahteine
e698998343
More reliable PROBING_HEATERS_OFF with BED_LIMIT_SWITCHING
2018-02-08 21:10:11 -06:00
shaktee
27faeafc1b
[2.0.x] BIBO Cyclops ( #9541 )
2018-02-08 21:01:31 -06:00
Scott Lahteine
2014d38e10
NEOPIXEL_BRIGHTNESS parity
2018-02-08 18:55:19 -06:00
Scott Lahteine
694d2ebec0
TMC SW SPI pins in Configuration_adv.h
...
Counterpart to #9632
2018-02-08 18:49:38 -06:00
GMagician
9854262334
[2.0.x] Fix compile warning ( #9539 )
2018-02-08 17:59:03 -06:00
Scott Lahteine
b639f1ad4b
Correct some retract() comments
2018-02-08 17:57:48 -06:00
Thomas Moore
1541224a81
Enable Z axis and delta sensorless homing ( #9516 )
2018-02-08 04:20:44 -06:00
Scott Lahteine
b2f8b4ada5
I2C position encoders update ( #9533 )
...
Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.
2018-02-08 03:57:11 -06:00
Thomas Moore
93af0365e8
[2.0.x] Add support for Cohesion3D ReMix and Mini ( #9512 )
...
* Add support for Cohesion3D ReMix and Mini
* Two separate pins files for pedantic reasons
2018-02-08 03:14:39 -06:00
Scott Lahteine
23240f7986
Fix sw serial pins for TMC2208
...
From #9518 by @melvinisken
2018-02-08 02:54:49 -06:00
Scott Lahteine
d42a87cb31
Update language Italian
...
From #9508 by @tnw513
2018-02-08 02:10:15 -06:00
Scott Lahteine
2538f019d0
Update language Basque-Euskera
...
From #9514 by @1138-4EB
2018-02-08 02:08:41 -06:00
Scott Lahteine
d168ee9bed
Drop leveling include from steppers.cpp
2018-02-08 01:32:19 -06:00
Scott Lahteine
09c8807a36
Minor formatting in queue.cpp
2018-02-08 01:31:19 -06:00
Scott Lahteine
704d33c374
Special override of LCD_WIDTH
2018-02-08 01:30:56 -06:00
Scott Lahteine
b3f115fa0a
Marlin.ino needs no content ( #9506 )
2018-02-06 02:28:18 -06:00
Scott Lahteine
ca8fdff1af
Comment G26 properly
2018-02-06 00:58:28 -06:00
Scott Lahteine
8558264514
Configs for Prusa i3 Pro B GT2560 Rev.A Plus ( #9505 )
...
One without probe and one with BLTOUCH.
2018-02-06 00:24:21 -06:00
Scott Lahteine
b5e92f4f90
[2.0.x] Enable / disable PSU automatically ( #9503 )
2018-02-06 00:22:30 -06:00
Scott Lahteine
eecb0188c0
Add ULTI_CONTROLLER to example configs
2018-02-05 22:30:03 -06:00
Scott Lahteine
16739264d3
Add UltiController v2.1 support
...
Add compatibility with the original screen bord from Ultimaker 2 printer (UltiController v2.1 with the PG-2864ALBP I2C display)
2018-02-05 22:30:03 -06:00
Scott Lahteine
a8c4174a13
M100 comment
2018-02-05 21:54:50 -06:00
Scott Lahteine
38d62494ef
Adjustment to DOG_CHAR_*_EDIT
2018-02-05 20:25:45 -06:00
Scott Lahteine
8a6feab1c4
Num-to-string functions for DEBUG_LEVELING_FEATURE
2018-02-05 19:08:27 -06:00
Scott Lahteine
766faa05a9
sp
2018-02-05 15:57:29 -06:00
GMagician
f27c89980a
[2.0.x] Simplify bltouch configuration ( #9488 )
2018-02-05 14:38:09 -06:00
GMagician
338dac258b
[2.0.x] Fix compiler error when G26 is enabled ( #9492 )
2018-02-05 14:27:39 -06:00
Scott Lahteine
4ddb6a3a1f
Merge pull request #9470 from thinkyhead/bf2_malyan_clueless
...
[2.0.x] Malyan M200 LCD
2018-02-05 05:03:18 -06:00
Scott Lahteine
03bfc0d7c8
Merge pull request #9439 from thinkyhead/bf2_fix_G26_circle_bumps
...
[2.0.x] Change G26 circle angles
2018-02-04 19:05:18 -06:00
Scott Lahteine
e5ee0b6f6c
Implement MALYAN_LCD
2018-02-04 18:52:44 -06:00
Scott Lahteine
b939a2e88c
Watchdog conditional for LPC
2018-02-04 18:52:44 -06:00
Scott Lahteine
4925f60cff
Add MALYAN_LCD to configs
2018-02-04 18:52:44 -06:00
Scott Lahteine
3a1225e438
Sanity check SENSORLESS_HOMING
2018-02-04 18:52:44 -06:00
Scott Lahteine
2ea4e74ed3
Misc. comments
2018-02-04 17:40:39 -06:00
Scott Lahteine
aecf0c9bb9
Allow override of CS pins generally
2018-02-04 16:36:30 -06:00
Scott Lahteine
0891b58c30
#ifdef tweaks
2018-02-04 16:36:30 -06:00
Bob-the-Kuhn
428f164d02
[2.0.x] Bug fix - "M114 D" and Due (dtostrf C linkage) ( #9481 )
2018-02-04 16:11:27 -06:00
Scott Lahteine
693843f1fa
Allow override of RAMPS CS Pins ( #9472 )
2018-02-04 16:00:16 -06:00
ABH10
ac6bf7226a
Update of comments in thermistor files. No functional changes. ( #8986 )
2018-02-04 06:06:21 -06:00
Alexey Shvetsov
da3a0d619c
Add Selena Compact board ( #9407 )
...
5-axis, high performance, powerful board with Smoothieware opensource firmware. Designed for 3D printer, Laser cutter or CNC mill. Five changed independent drivers on board. Two extruders 3d printer support.
2018-02-04 03:15:09 -06:00
Thomas Moore
786746404b
[2.0.x] Apply feedrate to nozzle movement for kinematic machines ( #8778 )
2018-02-04 00:26:05 -06:00
Scott Lahteine
5364b92c37
Drop obsolete string
2018-02-03 23:58:31 -06:00
shaktee
34624cf399
[2.0.x] BIBO TouchX configuration ( #9469 )
2018-02-03 23:21:02 -06:00
Bob-the-Kuhn
3d72fe0730
snapshot
2018-02-03 21:28:05 -06:00
Scott Lahteine
33ec599ca0
Tweaky LPC1768 SPI spacing/style
2018-02-03 20:25:57 -06:00
Scott Lahteine
c46de340b7
Clean up trailing whitespace
2018-02-03 20:05:23 -06:00
Thomas Moore
e1fd9c08b3
[2.0.x] Add support for LPC1769 at 120 MHz ( #9423 )
2018-02-03 19:33:26 -06:00
GMagician
6ace57e1b0
[2.0.x] remove duplicated include ( #9445 )
...
This was present in #9357 but lost
2018-02-03 19:32:05 -06:00
GMagician
9e13d1fad5
[2.0.x] Fix temperature out of LCD ( #9461 )
...
Fix bug introduced in #9415
2018-02-03 19:25:04 -06:00
Scott Lahteine
e6cdc438fd
Change G26 circle angles
...
To prevent the nozzle from colliding with the printed pattern.
2018-02-03 19:17:49 -06:00
Scott Lahteine
a8764ac5d5
G26 parity with 1.1.x
2018-02-02 05:19:14 -06:00
Manuel Valentino
374f2a5e16
[2.0.x] Fixed wrong information about TMC2208 wiring ( #9335 )
2018-02-02 04:45:55 -06:00
Bob-the-Kuhn
a0570ff1eb
Fix caselight on Due ( #9364 )
2018-02-02 04:13:33 -06:00
Scott Lahteine
b13099de3f
General cleanup of HAL code
2018-02-02 03:37:15 -06:00
Scott Lahteine
9b9350e010
Fix jerky Z motion between probes
...
Suggested by #9375
2018-02-02 02:32:11 -06:00
Scott Lahteine
d6e29e9597
Update French language
...
Based on #9373 by @nikkoura
2018-02-02 01:56:25 -06:00
GMagician
e1117a8492
[2.0.x] fix compile errors when CNC_COORDINATE_SYSTEMS is enabled ( #9380 )
2018-02-02 01:45:46 -06:00
GMagician
ea9ad4e46d
[2.0.x] Fix compile error on delta when NO_WORKSPACE_OFFSETS ( #9388 )
2018-02-02 01:44:48 -06:00
Scott Lahteine
79796b22ad
Fix up _Bootscreen.h and _Statusscreen.h
2018-02-02 00:57:16 -06:00
Bob-the-Kuhn
21179f8300
Fix the "slow" version of the G-code parser
2018-02-02 00:35:58 -06:00
Scott Lahteine
c251601916
Simplified SET_BIT, moved to endstops.cpp
2018-02-02 00:34:23 -06:00
Scott Lahteine
eb18ae9003
Define LSBFIRST / MSBFIRST for LPC
2018-02-02 00:34:23 -06:00
Scott Lahteine
f8227abf1c
Merge pull request #9384 from tcm0116/2.0.x-retract
...
[2.0.x] Clear retracted status when homing the Z axis
2018-02-01 23:36:36 -06:00
Scott Lahteine
ea5f91737f
Merge pull request #9392 from studiodyne/studiodyne-pause
...
[2.0.x] Pause resuming fix
2018-02-01 23:32:24 -06:00
teemuatlut
5c69d45f5b
[2.0.x] TMC2130 support for LPC platform ( #9114 )
2018-02-01 21:49:40 -06:00
Scott Lahteine
34160806c0
Fix broken G29 W I J
2018-02-01 21:37:35 -06:00
Scott Lahteine
f5cfdf6efe
Use _BV32 to avoid name conflict
2018-02-01 21:37:35 -06:00
Scott Lahteine
6339b506c0
Make sure binary.h is included as needed
2018-02-01 21:37:35 -06:00
studiodyne
51d080d2c1
Update Pause
2018-01-29 21:57:37 +01:00
Thomas Moore
7035471982
Clear retracted status when homing the Z axis
2018-01-29 19:40:04 +00:00
GMagician
6d4bc9a1f8
[2.0.x] Fix SD wrong filename list ( #9342 )
...
If last file in directory has short filename and is preceded by a deleted long file name. SD menu will wrongly report long deleted file name as last entry
2018-01-26 14:03:51 -06:00
Bob-the-Kuhn
c6e01ebd52
never mind ...
2018-01-25 22:13:32 -06:00
Bob-the-Kuhn
ab709ccac1
add USEABLE_HARDWARE_PWM & clear up some compiler warnings
2018-01-24 21:42:36 -06:00
Scott Lahteine
fc5c1a28d8
Fix M118 parameter parsing
2018-01-24 00:30:13 -06:00
Scott Lahteine
399bca316a
Fix has_value with FASTER_GCODE_PARSER
2018-01-24 00:30:13 -06:00
Scott Lahteine
80d3ded895
Change parser codebits from array to int32_t
2018-01-24 00:30:13 -06:00
Scott Lahteine
053b1371c7
Simplify G-code debug option
2018-01-24 00:06:07 -06:00
Scott Lahteine
608f8b10da
Parser val method parity with 1.1.x
2018-01-24 00:06:07 -06:00
Scott Lahteine
2bea1bda56
Move more strings to PROGMEM
2018-01-24 00:06:06 -06:00
Scott Lahteine
58671e1bc1
Marlin must override _BV for 32-bit masks!
2018-01-23 23:52:35 -06:00
Scott Lahteine
45cfb16424
Merge pull request #8355 from tcm0116/2.0.x-TwoWire
...
[2.0.x] Master-only TwoWire (I2C) class for LPC1768
2018-01-23 20:14:02 -06:00
Scott Lahteine
1dcfe193ac
Optimize some serial strings
2018-01-23 19:14:00 -06:00
Scott Lahteine
9644fe1839
Lightly optimize arc length calculation
2018-01-23 19:13:59 -06:00
Scott Lahteine
c9bda932fe
Patch M114 D logical output
2018-01-23 18:50:37 -06:00
Scott Lahteine
e5ca60acf5
Patch G29 no_action for A and Q
2018-01-23 14:00:06 -06:00
Scott Lahteine
696f8eb4c6
Include Z Fade in log_machine_info
2018-01-23 14:00:06 -06:00
Scott Lahteine
3217da6fa5
Followup patch for TMC stepper init
2018-01-23 14:00:06 -06:00
Scott Lahteine
db031d5d76
Add missing SoftwareSerial begin for TMC2208
...
Based on #9299
2018-01-22 10:43:24 -06:00
Thomas Moore
3db35ba9be
[2.0.x] Fix change filament for delta machines ( #9295 )
2018-01-22 10:21:42 -06:00
Scott Lahteine
2ebf52e57d
Fix Skew Correction pre-calculation overflow error
2018-01-22 08:20:21 -06:00
Scott Lahteine
adb2ac4747
Fix skew settings report precision
2018-01-22 08:09:36 -06:00
Scott Lahteine
205c5fa078
Merge pull request #9277 from oysteinkrog/fix/DualX_Endstops
...
[2.0.x] Fix DUAL_X_CARRIAGE endstop tests
2018-01-22 07:42:49 -06:00
Scott Lahteine
90d011cc48
Use ADD_PORT_ARG for all cases
2018-01-22 06:27:22 -06:00
Scott Lahteine
51c7b5d46f
Fix set_home_offset bug from bad porting
2018-01-22 06:16:21 -06:00
Scott Lahteine
b1cd012aa6
Clean up and document load/unload/pause/resume
2018-01-22 05:45:46 -06:00
Scott Lahteine
266086670b
Better LCD message when heating needed
2018-01-22 04:38:37 -06:00
Scott Lahteine
a718f5bdf3
Don't run M600 on filament runout if the nozzle is cold
2018-01-22 04:38:37 -06:00
Scott Lahteine
61bf8478a2
Add hotEnough methods
2018-01-22 04:38:37 -06:00
Scott Lahteine
7a52dfad55
Merge pull request #9283 from thinkyhead/bf2_jgaurora_configs
...
[2.0.x] Add JGAurora A5 support
2018-01-22 02:21:56 -06:00
Chris Pepper
f875f49caa
[2.0.x] LPC1768: Fix: Serial pins disabled correctly when in use ( #9193 )
2018-01-22 01:54:41 -06:00
Scott Lahteine
c63cffca7f
Add example configs for JGAurora A5
2018-01-22 01:27:11 -06:00
Scott Lahteine
7d6c009104
Add thermistor 15 tuned for JGAurora A5
2018-01-22 01:27:11 -06:00
Scott Lahteine
582d073de1
Patch up digital microstepping and SPI CS pins
2018-01-22 01:27:11 -06:00
Scott Lahteine
ab8a1a2a0d
Sync gCreate gMax1.5+ config with 1.1.x
2018-01-22 01:05:12 -06:00
Scott Lahteine
f9dbd4d9f4
Updated FolgerTech i3-2020 config
2018-01-22 01:05:12 -06:00
Scott Lahteine
348b454401
Probe bounds based on bed size
2018-01-22 01:05:11 -06:00
Bob-the-Kuhn
a440522f84
Merge pull request #9284 from Bob-the-Kuhn/DUE-pins-debug
...
[2.0.x] PINS_DEBUGGING maintenance
2018-01-21 18:40:39 -06:00
Scott Lahteine
58ed9901d7
Consistent NEOPIXEL_TYPE options
2018-01-21 17:19:38 -06:00
Scott Lahteine
382a5e3318
Clean up trailing whitespace
2018-01-21 17:19:38 -06:00
Øystein Krog
441517bbe1
Fix DUAL_X_CARRIAGE endstops
...
\#8170 fixed
2018-01-21 15:32:19 +01:00
Scott Lahteine
b46932f0c0
Merge pull request #9273 from thinkyhead/bf2_creality_tuneup
...
[2.0.x] Fix and improve Creality configs
2018-01-21 02:53:16 -06:00
Scott Lahteine
49bcb5ce2d
Merge pull request #9220 from benlye/lcd-timer
...
[2.0.x] Fix LCD timer string length
2018-01-21 02:47:59 -06:00
Scott Lahteine
07db5638e2
Add a heating indicator X offset
2018-01-21 02:04:14 -06:00
Scott Lahteine
c68ce8667d
Fix and improve Creality configs
2018-01-21 02:04:14 -06:00
Scott Lahteine
8190fdb260
[2.0.x] Option to use Neopixel as case light ( #9270 )
...
* Add option to use Neopixel as case light
* Apply CASE_LIGHT_USE_NEOPIXEL to example configs
2018-01-20 16:58:41 -06:00
GMagician
9b519864bf
[2.0.x] Relative movements fix ( #9259 )
2018-01-20 15:22:03 -06:00
Scott Lahteine
887664aa61
Restore broken Dual X Carriage
2018-01-20 15:08:50 -06:00
Scott Lahteine
fb044b6a64
Fix HAL_timer_set_current_count for STM32F1
2018-01-20 14:57:17 -06:00
Scott Lahteine
a8638aa20d
Update STM32F1 timer code to use libmaple bb_perip
2018-01-20 14:56:57 -06:00
Scott Lahteine
2e2fd8fd79
Merge pull request #9261 from tcm0116/2.0.x-delta_softstops
...
[2.0.x] Allow DELTA to compile with soft endstops disabled
2018-01-20 14:16:30 -06:00
Scott Lahteine
750cc02b3a
Use delay() in serial temp report
2018-01-20 14:13:17 -06:00
Scott Lahteine
9de8c04945
Allow FIL_RUNOUT_PIN override on RAMPS-based boards
2018-01-20 12:00:59 -06:00
Scott Lahteine
57b61491d3
Set FIL_RUNOUT_PIN for Creality CR10-S
...
Tested with M43 and found to be connected to DIO 2
2018-01-20 11:56:57 -06:00
Scott Lahteine
4a4d832344
Use standard encoder pulses/steps for CR-10S
2018-01-20 11:35:52 -06:00
Thomas Moore
44239b1062
Allow DELTA to compile with soft endstops disabled
2018-01-20 09:40:36 -06:00
Scott Lahteine
4bc4351250
Date refresh
2018-01-20 09:17:57 -06:00
Scott Lahteine
303d792b9f
Merge pull request #9253 from tcm0116/2.0.x-mks_sbase
...
[2.0.x] Cleanup MKS-SBASE compile warnings
2018-01-19 22:37:38 -06:00
Scott Lahteine
afec16e644
Merge pull request #9240 from tcm0116/2.0.x-eeprom
...
[2.0.x] Follow-on to #9161
2018-01-19 22:36:24 -06:00
Scott Lahteine
f2ea8a0529
Merge pull request #9197 from p3p/pr_bf2_operation_freemem
...
[2.0.x] LPC1768: Free up some RAM
2018-01-19 22:35:45 -06:00
Scott Lahteine
0c176c677e
Merge pull request #9231 from GMagician/2.0.x-ramps-pins-fixup
...
[2.0.x] Expand RAMP case light possibilities
2018-01-19 22:29:32 -06:00
Scott Lahteine
f2d09f27bb
Merge pull request #9246 from GMagician/2.0.x-bed-temp-limit-fix
...
[2.0.x] Standardized max temp values
2018-01-19 22:27:19 -06:00
Bob-the-Kuhn
16eb966ee3
PINS_DEBUGGING cleanup for DUE
2018-01-19 21:12:24 -06:00
Thomas Moore
63fd23ab1c
Cleanup MKS-SBASE compile warnings
2018-01-19 15:46:34 -06:00
Bob-the-Kuhn
11e68541b0
Merge pull request #9245 from Bob-the-Kuhn/TMC2208-sanity-check-2.0.x
...
[2.0.x] add TMC2208 sanity check to AVR
2018-01-19 15:42:53 -06:00
Thomas Moore
429e6ba8a6
Fix lcd_preheat dummy variable types
2018-01-19 15:24:13 -06:00
GMagician
719cd53e09
Standardized max temp values
...
Everywhere in menu items temperatures are "defined value" subtracted by 15.
In one place is subtracted by 5
2018-01-19 19:32:46 +01:00
Bob-the-Kuhn
0ea9cdf4f2
TMC2208 sanity check
2018-01-19 12:19:34 -06:00
Roxy-3D
7c469c0712
Suggested change to fix Due compile problem
2018-01-18 23:00:03 -06:00
Roxy-3D
bfd9728cf4
Serial buffer over run work around for v2.0.0 ( #9236 )
...
* Work around for serial buffer over run
PronterFace sends a lot of M105 commands. During long operations such
as UBL's G29 P1, G29 P2, G29 P4 and G26 this can over run the serial
buffer. This results (very often) in a M1 (actually a M1M105) ending
up in the command queue.
Until we figure out a better way to resolve this issue, this will keep
the UBL commands from experiencing bogus commands at thier completion.
2018-01-18 19:57:18 -06:00
GMagician
c371bdc499
Expand RAMP case light possibilities
...
Pin 6 is only used by servos when 2 or more of them are used
2018-01-18 18:31:08 +01:00
blye
7c18c2ea5f
Fix LCD timer string length
2018-01-17 21:10:45 +00:00
Roxy-3D
9d0cf02fef
Correct mesh size calculations
2018-01-17 09:36:12 -06:00
Scott Lahteine
c7bad74d8f
Merge pull request #9202 from benlye/m73-bugfix
...
[2.0.x] Fix progress bar duration when time is exactly 86400s
2018-01-16 21:14:58 -06:00
Roxy-3D
af9b32e3b9
Give PronterFace time to print the UBL What information...
...
Give PronterFace time to print the UBL What information...
2018-01-16 18:00:57 -06:00
Roxy-3D
acb1e31374
Fix UBL Mesh Size regression
2018-01-16 17:58:15 -06:00
Roxy-3D
f5f1b069ad
Convert UBL mesh tilting to all use the same algorithm ( #9204 )
...
A number of regressions were patched also. The UBL G29 P2 and P4 Press and Hold had stopped working. It is very possible this is broken in the bugfix_v1.1.x branch also.
The main purpose of the Pull Request is to get the 3-Point mesh tilting to use the LSF algorithm just like the grid based mesh tilt. This simplifies the logic and reduces the code size some what. But the real reason to do it is the 3-Point case can be solved exactly. And by feeding these numbers into the LSF algorithm it provides a way to check all that code for 'correctness'.
2018-01-16 11:08:00 -06:00
blye
554d849827
Fix duration when time is exactly 86400s
2018-01-16 08:12:00 +00:00
Christopher Pepper
6f1bf5d212
LPC1768: Config: default to SDSORT_LIMIT = 64 instead of 256
2018-01-15 22:02:21 +00:00
Christopher Pepper
1e65562d55
LPC1768: HAL: only initialise used HardwareSerial ports
...
Misc formatting
2018-01-15 22:00:59 +00:00
Roxy-3D
9dacd54a50
Get FT-i3-2020 configuration files into compliance with ?_BED_SIZE
2018-01-15 15:33:51 -06:00
Scott Lahteine
d178d6e921
M503 patch for EEPROM_CHITCHAT off
...
Fix #9155
2018-01-15 06:09:25 -06:00
Scott Lahteine
fa432508b0
Followup to Ender config
2018-01-15 06:00:21 -06:00
Thomas Moore
6856eccc77
Master-only TwoWire class for LPC1768
2018-01-15 05:22:03 -06:00
Scott Lahteine
d5bf9e74c4
Merge pull request #8996 from p3p/pr_bf2_more_adc_filter
...
[2.0.x] PID control fix and more LPC1768 ADC filtering
2018-01-15 05:14:25 -06:00
Scott Lahteine
4d2f277d43
Merge pull request #9189 from psavva/tmc_debug_compile_fix
...
[2.0.x] Fixes TMC_DEBUG compilation error
2018-01-15 04:52:21 -06:00
Scott Lahteine
43d3d024ac
Update tmc_util.cpp
2018-01-15 04:51:59 -06:00
Panayiotis Savva
ad500b01e0
Fixes TMC compilation error
2018-01-15 12:43:22 +02:00
Scott Lahteine
f4e4c7a7c8
Merge pull request #9188 from thinkyhead/bf2_creality_ender
...
[2.0.x] Add Creality Ender config/board
2018-01-15 04:33:09 -06:00
Scott Lahteine
2038722c52
LARGE_FLASH obsolete
2018-01-15 03:42:24 -06:00
Scott Lahteine
f887719a40
Creality Ender board support
2018-01-15 03:42:24 -06:00
Scott Lahteine
9a2dd0bc5a
Creality Ender 2/4 configuration
2018-01-15 03:42:23 -06:00
Scott Lahteine
2c18faf3e4
General cleanups for HAL
2018-01-15 02:46:37 -06:00
Scott Lahteine
42933c804a
Cleanups for STM32F7
2018-01-15 02:46:37 -06:00
Morten
a0246c5c96
Add support for STM32F7 MCU
2018-01-15 01:13:03 -06:00
Scott Lahteine
a27fa80a7e
More featureful CR-10S configuration
2018-01-15 01:06:06 -06:00
Scott Lahteine
1a3d2ad275
Merge pull request #9168 from marvin-sinister/rename-M100-2.0.x
...
[2.0.x] Rename M200 pins file to uppercase
2018-01-15 00:49:06 -06:00
Scott Lahteine
a408209d24
More reliable temperature serial report?
2018-01-15 00:43:51 -06:00
Scott Lahteine
5f807e37c5
A second rename saves nine
2018-01-14 23:44:19 -06:00
Scott Lahteine
3ae41e5f7f
Merge pull request #9152 from thinkyhead/bf2_anti_stutter
...
[2.0.x] Ensure smooth printer movements
2018-01-14 23:34:01 -06:00
Scott Lahteine
02ff12d491
More up front option to show SD percentage
2018-01-14 23:32:39 -06:00
Scott Lahteine
3b15c88225
Merge pull request #9153 from thinkyhead/bf2_malyan_support
...
[2.0.x] Fix support for Malyan M150
2018-01-14 22:54:00 -06:00
Scott Lahteine
e753d6298f
FLSUN Kossel example configs
2018-01-14 22:52:35 -06:00
Scott Lahteine
77c2d810f9
Bring configs up to date
2018-01-14 22:52:06 -06:00
Scott Lahteine
3952070800
Link to marlinfw.org boot screen tool
2018-01-14 22:41:05 -06:00
Scott Lahteine
0cd397a3f8
Add instructions for Malyan M150
2018-01-14 21:15:03 -06:00
Scott Lahteine
344ebc3bd2
Create and use pins_MELZI_MALYAN.h for Malyan M150
2018-01-14 21:14:58 -06:00
Scott Lahteine
094e9b1dab
Remove ARDUINO_ARCH_SAM from serial.h too?
2018-01-14 21:07:10 -06:00
Scott Lahteine
c37d38886c
Fix serial.h avr block
...
Followup to #8148
2018-01-14 21:07:10 -06:00
Scott Lahteine
4f5e087ff4
Planner anti-stutter by Sebastian Popp
2018-01-14 21:07:10 -06:00
Scott Lahteine
ac368f2788
Add STEPPER_ISR_ENABLED() to HALs
...
Some also get a `HAL_timer_interrupt_enabled` function.
2018-01-14 21:07:10 -06:00
Scott Lahteine
5578dccaa0
Merge pull request #9161 from tcm0116/2.0.x-eeprom
...
[2.0.x] Fix EEPROM SettingsData for 32-bit architectures
2018-01-14 20:50:37 -06:00
Scott Lahteine
6ba8cf8405
Merge pull request #9163 from GMagician/2.0.x-SD-issues-fix
...
[2.0.x] sd issue fix
2018-01-14 20:48:52 -06:00
Marvin Sinister
50c55b25f7
Renamed to upercase
2018-01-13 15:02:07 +01:00
GMagician
6667a916a4
Indentation fix
2018-01-13 09:48:26 +01:00
GMagician
be717b3c07
Save some program memory
...
This will save some program memory with no speed lose
2018-01-13 08:56:51 +01:00
GMagician
f37c64ee5b
Fix unsupported CMD59
...
It seems that some SD cards don't support CRC_ON_OFF command. This fix will permit to use also these cards but leaving CRC check active on the system
2018-01-13 08:53:12 +01:00
Thomas Moore
cfd989d7c5
Fix EEPROM SettingsData for 32-bit architectures
2018-01-12 19:38:23 -06:00
Bob-the-Kuhn
da600e5fbe
Merge pull request #9132 from Bob-the-Kuhn/add-VIKI2-to-Travis
...
[2.0.x] add VIKI2 test to Travis & fix LCD contrast (again)
2018-01-12 00:42:04 -06:00
Scott Lahteine
742cff5f3c
Followup to #9141
2018-01-11 22:15:01 -06:00
Thomas Moore
84de428d30
[2.0.x] Fix compile errors ( #9141 )
...
* Update persistent_store_impl.cpp
* Remove define BYTE from serial functions since Arduino docs typically show 0 for the normal case.
2018-01-11 21:43:26 -06:00
Bob-the-Kuhn
e633ce06c7
LCD contrast type mismatch is back
...
WORKS!
2018-01-11 10:32:58 -06:00
Scott Lahteine
e654ea1e1a
Merge pull request #9130 from thinkyhead/bf2_tmc_followup
...
[2.0.x] More TMC followup
2018-01-11 03:40:45 -06:00
Scott Lahteine
8ac246162e
Creality CR-10S configurations
...
Provided by printedsolid.com
2018-01-11 01:10:17 -06:00
Scott Lahteine
048486390e
Bring some configs up to date
2018-01-11 01:10:17 -06:00
Scott Lahteine
6a043eee55
Various updates for TMC support
2018-01-10 23:04:48 -06:00
Scott Lahteine
d7fd78cb91
Merge pull request #8148 from tcm0116/2.0.x-multi_host
...
[2.0.x] Add multi-host support
2018-01-10 02:38:59 -06:00
teemuatlut
a8c446c3bc
[2.0.x]DUE: Fix includes for SDSUPPORT ( #9112 )
2018-01-10 00:46:34 -06:00
Thomas Moore
f7efac57b7
Multi-host support
2018-01-10 00:14:47 -06:00
Thomas Moore
dabb75034c
Update example configurations
2018-01-10 00:01:20 -06:00
Bob-the-Kuhn
6a50adb4d5
works
2018-01-09 22:15:33 -06:00
Scott Lahteine
5c076a6d93
Improved M915 description
2018-01-09 18:56:27 -06:00
Scott Lahteine
a94104dbb5
Merge pull request #9113 from teemuatlut/TMC_followup
...
[2.0.x]TMC followup
2018-01-09 18:46:35 -06:00
Dave Johnson
554e577676
SERIAL_STATS_* features not supported on USBCON targets ( #9127 )
2018-01-09 18:42:55 -06:00
Dave Johnson
2db666e99a
Enable USE_ZMIN_PLUG on SCARA example ( #9126 )
2018-01-09 18:41:28 -06:00
Scott Lahteine
7e000e6af4
More EEPROM field debugging ( #9123 )
2018-01-09 18:33:44 -06:00
GMagician
3a99dc7c5c
2.0.x Fix compiler warning ( #9116 )
...
Fix duplicate language define warning
2018-01-09 16:54:41 -06:00
GMagician
5295b4713d
[2.0.x] add semitec 104NT-4 ( #9119 )
...
Table is very very similar to old 104-GT2 so I added only the name and recycled old ID
2018-01-09 16:53:12 -06:00
teemuatlut
cdc61ebf53
Add M915 configuration option
2018-01-09 18:28:48 +02:00
teemuatlut
9d923c6c03
Fix TMC gcode commands
2018-01-08 18:45:05 +02:00
Scott Lahteine
99516572b1
Fix TMC current read from EEPROM
2018-01-07 20:48:46 -06:00
Tannoo
f26805e862
[2.0.x] UBL Mesh Storage Message ( #9095 )
2018-01-07 20:33:53 -06:00
Christopher Pepper
14dcad6bbc
LPC1768: Increase ADC median filter from 3 values to 23
...
Clarify the HAL_adc_get_result method to make sure correct values enter the filters
HAL: Fix the PID control loop for non-AVR platforms
2018-01-07 22:15:20 +00:00
Scott Lahteine
60d07f20e7
Make mbl.has_mesh() a method
2018-01-07 00:13:36 -06:00
Scott Lahteine
86818c9a89
Move MBL functions into the class
2018-01-07 00:13:36 -06:00
Unknown
bbb8d4c802
Set has_mesh if user issues G9 S3
...
Prevents user from having to manually run through entire manual leveling process only to enable mesh so they can manually restore their offline mesh backup
2018-01-06 21:07:07 -08:00
Scott Lahteine
2b5a9be49c
Fix M503 skew output
...
Followup to 19e75ccf86
2018-01-06 20:55:57 -06:00
Scott Lahteine
cf2922f164
Laser/spindle PWM off on M5
2018-01-06 15:29:22 -06:00
GMagician
5fb6dd1424
Bmp fix
...
Clockwise arrow fixed
2018-01-06 19:02:36 +01:00
Bob-the-Kuhn
cb0e826c5d
Merge pull request #9068 from Bob-the-Kuhn/SD-detect
...
[2.0.x] SD card detect improvement
2018-01-05 21:09:57 -06:00
Bob-the-Kuhn
f72b0a7b04
1234
2018-01-05 20:36:05 -06:00
Scott Lahteine
702c8acdd5
Settings FIELD_TEST fix
2018-01-05 19:13:30 -06:00
Scott Lahteine
e89f1453ab
UBL G29 works without settings.load()
2018-01-05 15:48:34 -06:00
Scott Lahteine
950be70a33
Add FIELD_TEST to validate storage
2018-01-05 15:48:34 -06:00
Scott Lahteine
760c912ab9
Add data size validation
2018-01-05 15:48:34 -06:00
Scott Lahteine
b91ca168fb
Add a struct defining EEPROM storage
2018-01-05 15:48:34 -06:00
Scott Lahteine
51e0f2bee3
Add MarlinSettings::validate()
2018-01-05 14:35:24 -06:00
Scott Lahteine
878f54c27b
Write filler with NO_VOLUMETRICS
2018-01-05 10:29:49 -06:00
Scott Lahteine
3ea6745b36
Pretty up TMC current write
2018-01-05 10:29:49 -06:00
Scott Lahteine
3319765034
Detab some HAL files
2018-01-05 10:28:17 -06:00
Scott Lahteine
1c41de16d4
Trailing whitespace clean
2018-01-05 10:11:31 -06:00
Scott Lahteine
1746a7352e
Merge pull request #9042 from thinkyhead/bf2_M701_M702
...
[2.0.x] Improved Pause/Load/Unload, M701-M702
2018-01-04 19:41:58 -06:00
Scott Lahteine
048d8a0158
CheapTRONIC v2.0 additions/revisions
...
Based on #9030
2018-01-04 18:00:25 -06:00
Roxy-3D
3a4e107b6b
use SERIAL_EOL(); instead of new line string
2018-01-04 16:20:18 -06:00
Roxy-3D
a5dfe08a81
Add precision to planner.xy_skew_factor so it doesn't print as 0.00
2018-01-04 16:14:09 -06:00
Roxy-3D
19e75ccf86
Add enough precision so planner.xy_skew_factor doesn't print as 0.00
2018-01-04 16:02:22 -06:00
Scott Lahteine
4fb60e1562
M702.cpp => M701_M702.cpp
2018-01-04 15:07:37 -06:00
Scott Lahteine
7541316bb4
Add M701/M702 Filament Load/Unload, M603
2018-01-04 15:07:37 -06:00
Scott Lahteine
81211da7b4
M701 / M702 language changes
2018-01-04 05:05:28 -06:00
Scott Lahteine
8704e533da
Apply FILAMENT_LOAD_UNLOAD_GCODES to example configs
2018-01-04 03:56:36 -06:00
Scott Lahteine
455592eee8
Improvements to LCD menu macros
2018-01-04 03:56:36 -06:00
Scott Lahteine
a80f2eea23
Group leveling reports for folding
2018-01-04 03:56:36 -06:00
Scott Lahteine
190cd0a111
Nozzle park args
2018-01-04 03:56:36 -06:00
revilor
0e93506985
Fix for issue #9005 , #8942 - Bed PID autotuning ( #9036 )
2018-01-04 03:26:14 -06:00
Bob-the-Kuhn
016e46a3c0
Merge pull request #9009 from Bob-the-Kuhn/Due-RRDFG-power-up-garbage
...
[2.0.x] Due - fix power up garbage on RRDFG LCD
2018-01-03 23:19:29 -06:00
studiodyne
31582caa07
2.0 Fix for bad Pause extruder position resuming ( #9029 )
2018-01-03 23:18:27 -06:00
Bob-the-Kuhn
4626d04067
as good as i can get it
...
minor edits to force new Travis test (last one timed out)
Update u8g_com_HAL_DUE_st7920_sw_spi.cpp
initial power up display garbage gone
2018-01-03 22:46:31 -06:00
Scott Lahteine
4af3d436b2
M303 pid autotune cleanup, commentary
2018-01-03 21:30:45 -06:00
Bob-the-Kuhn
e5b71af8c9
snapshot
...
found a few more nasties
2018-01-03 10:41:23 -06:00
Scott Lahteine
724e3f33bc
Merge pull request #9001 from Tannoo/(2.0.x)_LCD_EEPROM_init_fix
...
[2.0.x] EEPROM init fix
2018-01-03 05:47:01 -06:00
revilor
959a2d2527
Add beginTransaction to HAL SPI ( #9019 )
2018-01-03 05:12:25 -06:00
Tannoo
e43f3ac989
EEPROM init fix
2018-01-03 04:31:01 -06:00
Scott Lahteine
fc67c64b8f
Merge pull request #8989 from tcm0116/2.0.x_ubl
...
[2.0.x] Fix UBL compilation warnings
2018-01-02 21:38:45 -06:00
Thomas Moore
8afc4f8d9d
Fix UBL compilation warnings
2018-01-02 21:00:06 -06:00
Bob-the-Kuhn
eca5cc8669
Merge pull request #9003 from Bob-the-Kuhn/Due-PINS_DEBUG-&-related
...
[2.0.x] add Due PINS_DEBUG support & misc improvements (replaces PR #8990 )
2018-01-02 18:47:53 -06:00
Bob-the-Kuhn
e9fc7bc69c
Merge pull request #9000 from Bob-the-Kuhn/2.0-LCD-contrast
...
[2.0.x] lcd_contrast type mismatch work around
2018-01-02 18:46:31 -06:00
Bob-the-Kuhn
5574fad69c
copy of PR #8991 code
...
Formatting tweaks
correct array initialization & remove test code
2018-01-02 11:17:46 -06:00
Scott Lahteine
d190c702de
Add MKS_BASE Microstepping pins
...
Based on #9008
2018-01-01 18:49:21 -06:00
Scott Lahteine
5e01ee8adf
Temperature updates for parity with 1.1.x
2018-01-01 18:29:08 -06:00
Bob-the-Kuhn
adb9ecf3cc
copy of PR #8990
2018-01-01 16:11:56 -06:00
Roxy-3D
39e5fabfa9
Z BabyStepping should not be dependent on a bed leveling system being active
2018-01-01 14:46:50 -06:00
Bob-the-Kuhn
ef911a2d12
works
2018-01-01 14:35:16 -06:00
Scott Lahteine
d80c4f1a6e
Fix typo in delta call to buffer_line
...
Fix #8901
2017-12-31 01:40:07 -06:00
Scott Lahteine
9312ee63b0
Merge pull request #8979 from thinkyhead/bf2_sync_up_configs
...
[2.0.x] Synchronize configs with 1.1.x
2017-12-31 01:15:43 -06:00
Scott Lahteine
41dfb229ec
Merge pull request #8978 from thinkyhead/bf2_slimming_option
...
[2.0.x] SLIM_LCD_MENUS option
2017-12-31 00:56:29 -06:00
Scott Lahteine
3dd04736c0
Update M17_M18_M84.cpp
2017-12-31 00:26:45 -06:00
Scott Lahteine
2929c9e56f
A specific option to SLIM_LCD_MENUS
2017-12-31 00:11:22 -06:00
Scott Lahteine
10edb469bb
Apply SLIM_LCD_MENUS to example configs
2017-12-31 00:11:21 -06:00
Scott Lahteine
5294fd132f
Merge pull request #8924 from ejtagle/bugfix-2.0.x
...
[2.0.x] Improve SW SPI for DUE a bit more
2017-12-30 23:32:46 -06:00
Scott Lahteine
0b4a46fa6c
Bring configs up to date with 1.1.x
2017-12-30 23:28:53 -06:00
Scott Lahteine
7cc2193bce
Add Tronxy X1 example config ( #8972 )
2017-12-30 17:25:31 -06:00
etagle
729a9f55fc
Improved Sw SPI on DUE HAL a bit more.
...
Now the USB MSD can transfer at 750k/s. Previously, it was 500k/s. I think this is the maximum achievable speed using Sw SPI.
2017-12-30 17:24:38 -06:00
Scott Lahteine
615146c069
Enqueue commands better in ultralcd.cpp
2017-12-30 04:44:59 -06:00
Scott Lahteine
9686ffedef
Single pause flag also indicates SD print pause
2017-12-30 04:44:59 -06:00
Scott Lahteine
6d94bbf618
Apply some PGM_P pointers
2017-12-30 04:03:17 -06:00
Bob-the-Kuhn
cba44128d5
fix include
2017-12-29 10:08:30 -06:00
Scott Lahteine
427df8792d
Fix Capabilities Report
2017-12-28 21:08:59 -06:00
Scott Lahteine
2526ac6500
Display up to 3 extruders on char LCD
...
…and show bed level indicator at the position of the [H] icon, when a heated bed exists.
2017-12-28 20:17:42 -06:00
Scott Lahteine
db32c185ae
Merge pull request #8860 from Bob-the-Kuhn/2.0.x-DUE-RRDFGSC
...
[2.0.x] DUE - update for Reprap Discount Full Graphic Smart Controller
2017-12-27 05:06:49 -06:00
Scott Lahteine
9ecdd1f4c7
Multi extruder support for M600 and LCD
2017-12-27 04:33:25 -06:00
Scott Lahteine
a1ce6e8ff4
Clear lcd_clicked immediately on use
2017-12-26 22:26:04 -06:00
Scott Lahteine
5effe1590c
Fix NO_VOLUMETRICS bug
2017-12-26 20:04:44 -06:00
Scott Lahteine
f163eede78
No sub-menu if NO_VOLUMETRICS
...
For parity with #8911
2017-12-26 18:28:42 -06:00
Scott Lahteine
2c4e03d2cf
Indentation of a SW SPI file
2017-12-25 09:34:43 -06:00
Scott Lahteine
1a827d5b68
Opening brace tweaks
2017-12-25 09:34:43 -06:00
Bob-the-Kuhn
a142fab155
Enable RRDFGSC on Due
2017-12-25 09:22:14 -06:00
Scott Lahteine
b259bb4670
Fix tmc_util global vars
2017-12-25 09:05:31 -06:00
Scott Lahteine
4ef965cc40
Fix compiler warnings
2017-12-25 08:53:01 -06:00
Scott Lahteine
9e8008c49c
Fixes for G29, esp. 3POINT
2017-12-25 08:37:27 -06:00
Scott Lahteine
026e301307
lcd_map_control deps on ULTIPANEL
2017-12-25 07:46:25 -06:00
Scott Lahteine
f2731c9f93
Allow consecutive uses of G29
2017-12-25 06:32:33 -06:00
Scott Lahteine
4b49ea1e92
General cleanup of config-store, reset_bed_level
2017-12-25 05:16:01 -06:00
Scott Lahteine
2925852244
Fix GT2560 A+ servo pin
2017-12-25 02:18:56 -06:00
Scott Lahteine
c6354fa153
Tweak M125 code
2017-12-25 01:39:55 -06:00
Scott Lahteine
3b51f5c67e
Add pause/resume action to example configs
2017-12-25 01:39:18 -06:00
Scott Lahteine
f704f405af
Add pause/resume actions on M600, M125
2017-12-25 01:39:18 -06:00
Thomas Moore
f0a8a1a853
[2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE ( #8866 )
...
* Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
2017-12-25 01:38:06 -06:00
Scott Lahteine
705ea98fd3
Comment return false in motion functions
2017-12-24 22:57:15 -06:00
Scott Lahteine
50366b00d5
Tweak cleaning buffer / SD finished command
2017-12-24 20:35:05 -06:00
Scott Lahteine
28fc8741d6
Reduce default jerk. XY by half. Z by 1/4
2017-12-24 19:54:11 -06:00
Bob-the-Kuhn
1a948cbd93
Fix SET_OUTPUT glitch - LPC1768 & DUE
2017-12-24 19:25:32 -06:00
Scott Lahteine
869c89d83f
Merge pull request #8865 from thinkyhead/bf2_more_scara_scaling
...
[2.0.x] SCARA Feedrate Scaling for G2/G3 - using HYPOT
2017-12-24 19:18:13 -06:00
Scott Lahteine
1cf1cf8759
Add RADDS_DISPLAY to example configs
2017-12-24 19:00:23 -06:00
Even
ea1a8d1223
add original RADDS LCD + Controller
...
adds setup for the original Radds Display+Controller+SD Card Reader PCB
http://doku.radds.org/dokumentation/lcd-display/
2017-12-24 19:00:23 -06:00
Scott Lahteine
4a8fd8ae92
Merge pull request #8853 from ejtagle/bugfix-2.0.x
...
USB Mass Storage Implementation / CDC with HW flow control and misc fixes and improvements for Arduino DUE/RE-ARM based boards
2017-12-24 18:50:28 -06:00
Scott Lahteine
aa97cd6e9b
Merge pull request #8871 from petrzjunior/bugfix-2.0.x
...
[2.0.x][Language] Update Czech for Dec 2017
2017-12-24 18:48:59 -06:00
Thomas Moore
2917d1217d
Revert "Followup to #8698 "
...
This reverts commit 4e891e9fb7
2017-12-23 17:00:33 -06:00
Petr Zahradník
69a51a426c
Update Czech language Dec 2017
2017-12-22 19:35:09 +01:00
Scott Lahteine
caa5093498
General DELTA_IK macro
2017-12-21 22:41:57 -06:00
Scott Lahteine
c694608450
Apply SCARA_FEEDRATE_SCALING to G2/G3
2017-12-21 22:33:27 -06:00
Scott Lahteine
97d509d4d2
Revert "Improved Core-compatible jerk code"
...
Reverting commit 3cd7659
2017-12-21 16:54:30 -06:00
Scott Lahteine
5bc2acc072
Restore position_float to fix LIN_ADVANCE
2017-12-21 16:45:46 -06:00
etagle
33a6fc70e4
Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)
2017-12-21 02:42:46 -03:00
etagle
d8a4db72ac
Reimplemented SW SPI for DUE in assembler. This allows to reach 12Mhz as SPI Clock and improves 4x the transfer speed to the SD card. This is REQUIRED so access to SD from USB is usable (allows 600Kbytes/second transfer speeds)
2017-12-21 02:35:49 -03:00
etagle
99b2fc2066
Adjusted timings on the ST7290 u8glib so RE-ARM and RAMPS4DUE have no problems when writing to the graphics LCD. This fixes Issue #8787 - Special thanks to Bergerac56 for testinf this out !!!
2017-12-21 02:33:22 -03:00
etagle
498ea7512a
Exposed SDCard interface to the public, to USB MSD is able to read/write sectors on the SD card
2017-12-21 02:30:18 -03:00
etagle
9aff55ed1f
Backported latest improvements and fixes from the SdFat liibrary to our own version. This includes support for CRC7 validation on commands and also, made sure that even if using software SPI implementations, SD card speed is properly adjusted when transitioning from INITIALIZATION to DATA TRANSFER mode. ALL HALs implement spiInit, even in SW SPI mode, and we NEED this change to improve 25x the transfer speed of the SD card and allow implementations of USB MSD
2017-12-21 02:29:00 -03:00
etagle
7447979110
Fixed some warnings on the MakerParts configuration, when compiling using the AVR toolchain (integer overflow on the preprocessor calculations)
2017-12-21 02:23:24 -03:00
etagle
b6f9c333d4
Adding hooks into the idle loop so HALs can execute 2nd plane tasks, such as serving SD card read/writes requested from the USB MSD layer
2017-12-21 02:22:08 -03:00
victorpv
2ec4113cb2
Changes to STM32F1 HAL ( #8833 )
...
Some to correct missing files from previous PR to completely avoid
HardwareTimer Class (reduce overhead). Some changes to formatting.
Changes to DMA ADC to work correctly.
Change to F1 sanity check.
2017-12-20 16:16:36 -06:00
Scott Lahteine
913d9e9a59
Matching sign across filwidth vars
2017-12-20 00:17:19 -06:00
Scott Lahteine
3cde4c78b2
Use wildcard *.cpp in Makefile
...
Based on #8738
Addressing #8731
2017-12-19 23:44:46 -06:00
Scott Lahteine
fdc5e72720
A single setting to validate filament width
2017-12-19 21:33:25 -06:00
Scott Lahteine
93a6a4e1a8
Add VOLUMETRIC capability item
2017-12-19 20:11:23 -06:00
Scott Lahteine
933f76fda3
Option to disable all volumetric extrusion
2017-12-19 19:51:25 -06:00
Scott Lahteine
31e33d2acd
Add NO_VOLUMETRICS to example configs
2017-12-19 19:51:25 -06:00
Scott Lahteine
fc9ee1a4de
Fix up serial sanity check
2017-12-19 19:11:43 -06:00
Scott Lahteine
de5ca96654
More parity with 1.1.x, plus whitespace
2017-12-19 18:36:16 -06:00
Scott Lahteine
a891d8d738
Merge pull request #8820 from thinkyhead/bf2_mks_sbase_spi
...
[2.0.x] Fix SDSUPPORT for MKS SBASE
2017-12-17 21:15:49 -06:00
Scott Lahteine
097a26007f
Fix SDSUPPORT for MKS SBASE
...
Fix supplied by @cjsoong in https://github.com/MarlinFirmware/Marlin/issues/8750#issuecomment-350779983
2017-12-17 03:05:33 -06:00
Scott Lahteine
8df5955da4
Revert "Reset timer count before first block step"
...
This reverts commit 5cf6a062e3
2017-12-17 02:37:35 -06:00
Scott Lahteine
957bbab57f
Update inc files for parity with 1.1.x
2017-12-16 20:20:06 -06:00
Scott Lahteine
f79026acc1
Apply MKS_12864OLED_SSD1306 to examples
...
Followup to #8814
2017-12-16 20:15:36 -06:00
Dan Delaney
b055d8c39c
[2.0.x] Adding support for using the MKS_12864OLED with the SSD1306 controller ( #8814 )
...
* Adding support for using the MKS_12864OLED with the SSD1306 controller
* Update comment for correct controller type
2017-12-16 18:47:04 -06:00
Scott Lahteine
15d05748df
Adding support for the Tronxy and Zonestar LCD
2017-12-15 19:13:52 -06:00
Scott Lahteine
9abbcc3ee0
Apply ZONESTAR_LCD to example configs
2017-12-15 19:11:02 -06:00
Dave Johnson
aed0cfa3d1
Various fixes for 2.0.x configs
2017-12-15 17:09:46 -06:00
Scott Lahteine
674deaf223
Add NANODLP_ALL_AXIS to config examples
2017-12-15 16:22:56 -06:00
robpower
5595098063
V2 Extended NanoDLP_Z_Move_Sync to G4 & G28,Added all axis option.
2017-12-15 16:22:55 -06:00
Scott Lahteine
2b7db90340
Bring Malyan M200 config up to date
2017-12-15 15:47:22 -06:00
Scott Lahteine
8b12371e45
Change some hex case
2017-12-15 15:47:22 -06:00
Scott Lahteine
4782acf60e
Merge pull request #8780 from fiveangle/bf2-typo
...
[2.0.x] typo in Marlin.cpp
2017-12-15 15:25:41 -06:00
teemuatlut
0cd1e91056
[2.0.x] TMC driver update ( #8769 )
2017-12-15 15:03:14 -06:00
Scott Lahteine
09d13f186f
Correct unskew, after all
2017-12-15 14:24:20 -06:00
Dave Johnson
0d531d9655
Missing HAS_HEAT_BED conditional
...
Fixes issue found in #8779
2017-12-15 11:33:37 -08:00
Dave Johnson
69efb87d19
typo in Marlin.cpp
2017-12-14 08:20:45 -08:00
Scott Lahteine
368c124de8
Fix Planner::unskew parity with skew
2017-12-13 17:46:48 -06:00
Scott Lahteine
cf2193c07f
Comment, fix filament width sensor
2017-12-13 02:32:34 -06:00
Scott Lahteine
a641992c1d
Merge pull request #8762 from victorpv/patch-2
...
[2.0.x] STM32F1 HAL: Fix issue #8585 . Updates to readme.
2017-12-12 18:28:18 -06:00
Eduardo José Tagle
ac168a03c8
Fixes for the Arduino DUE HAL (Serial Port, Graphics Display, EEPROM emulation) ( #8651 )
...
* Fixing the DUE serial port assignments: Now -1 means the SAM3x USB Device emulating a serial port, and 0 means the USB to serial adapter included as a programming port
* Improving the Fast IO port access implementation on Arduino DUE
* Implemented EEPROM emulation on Due by storing data on the internal FLASH (with wear leveling)
* Implemented a Software SPI for the ST7920 graphics display for the Arduino RAMPS for DUE, as the default one in u8glib is clocking data too fast on ARM, and the display does not understand it.
* Fixing the case where the serial port selected is the USB device
* Adding configuration for the Makerparts 3D printer (www.makerparts.net)
* Tuned MakerParts acceleration on X and Y axis so it never loses steps. Also adjusted pulses per mm to match default hw configuration
* Fine tuned Maximum acceleration for MakerParts printer
* Style cleanup
* Style cleanup (2)
* Style fixes (3)
* Fixing the DUE serial port assignments: Now -1 means the SAM3x USB Device emulating a serial port, and 0 means the USB to serial adapter included as a programming port
* Improving the Fast IO port access implementation on Arduino DUE
* Implemented EEPROM emulation on Due by storing data on the internal FLASH (with wear leveling)
* Implemented a Software SPI for the ST7920 graphics display for the Arduino RAMPS for DUE, as the default one in u8glib is clocking data too fast on ARM, and the display does not understand it.
* Fixing the case where the serial port selected is the USB device
* Adding configuration for the Makerparts 3D printer (www.makerparts.net)
* Tuned MakerParts acceleration on X and Y axis so it never loses steps. Also adjusted pulses per mm to match default hw configuration
* Fine tuned Maximum acceleration for MakerParts printer
* Style cleanup
* Style changes to u8g_dev_st7920_128_64_sw_spi.cpp
* Even more improvements to the FastIO HAL for DUE. Now WRITE() is 2 ASM instructions, if value is constant, and 5 cycles if value is not constant. Previously, it was 7..8 cycles
* After some problems and debugging, seems we need to align the interrupt vector table to 256 bytes, otherwise, the program sometimes stops working
* Moved comments out of macro, otherwise, token pasting does not properly work sometimes
* Improved Software SPI implementation on DUE: Now it honors the selected speed passed to spiInit(). This allows much faster SDCARD access, improving SDCARD menus and reducing latency
* Update u8g_dev_st7920_128_64_sw_spi.cpp
* Disabling EEPROM over FLASH emulatiion if an I2C or SPI EEPROM is present
2017-12-12 17:51:36 -06:00
victorpv
084f2434a7
Update readme.md
2017-12-11 23:14:13 -06:00
victorpv
7c7ae5ebef
Delete duplicated file.
2017-12-11 23:10:44 -06:00
victorpv
4feffca178
fix for issue #8585
...
As reported in this issue:
https://github.com/MarlinFirmware/Marlin/issues/8585
I have it working fine in my local copy like that change.
2017-12-11 23:07:39 -06:00
Scott Lahteine
d568e586b7
Fix up ubl_motion indentation
2017-12-11 03:08:45 -06:00
Scott Lahteine
24f9bec6f4
UBL + DUAL_X_CARRIAGE compatibility
2017-12-11 03:08:18 -06:00
Scott Lahteine
6d0678d963
Omit unused UBL motion code
2017-12-11 03:08:18 -06:00
Scott Lahteine
3255712343
Skew Correction for UBL
...
Also remove unused grid slicing function when using UBL segmented.
2017-12-11 03:08:15 -06:00
Scott Lahteine
3d796d8040
Move debug code
2017-12-11 00:27:06 -06:00
Scott Lahteine
3db5303bfe
_buffer_line => buffer_segment
2017-12-11 00:27:06 -06:00
Scott Lahteine
a71d2f3f40
UBL_DELTA => UBL_SEGMENTED
2017-12-11 00:27:06 -06:00
Scott Lahteine
73e32925e4
References are better for array args
2017-12-11 00:27:06 -06:00
Scott Lahteine
125c572d97
Tweak M114 detail
2017-12-11 00:27:06 -06:00
victorpv
a5150c83a2
[2.0.x] Multiple updates to STM32F1 HAL ( #8733 )
...
* STM32F1 HAL
Adding files for STM32F1 HAL based on libmaple/stm32duino core.
Current persistent_store uses cardreader changes to be sent in separate
commit, but could be changed to use i2c eeprom.
There is another persistent_store implementation that uses the MCU flash memory
to emulate eeprom
Adding readme with some information about the stm32 HAL.
* Switch to Timer4 to avoid a hard reset on STM32F103C6 boards
On bluepill STM32F103C6 boards, using Timer5 results in a error() vector call. Switch to 4 since these are both general purpose, 16 bit timers.
* Add support for EEPROM emulation using Flash
Some low end machines doe not have EEPROM support. Simulate it using the last two pages of flash. Flash does not allow rewrite between erases, so skip writing the working version if that's enabled.
* Basic Pins for a malyan M200
This is a work in progress to go hand in hand with the STM32 work.
* Add support for ADC with DMA. This work has exposed a problem with the pin enumerations in STM boards vs what marlin expects (i.e, try defining PA0 as a temp pin). The hack can be removed with we go to fastio completely. To see this work, set something in adc_pins to a value like PA0 and connect your pullup resistor'd thermistor.
* Missing file - change HAL_adc_init to actually do something
We have an actual ADC init function now.
* Remove pinmode hack
Remove the pin mode hack that I was using to init PA0.
Updated Readme.md
* Several changes to timers and GPIO
Faster GPIO, and faster timer functions by accesing registers and
libmaple.
Still more changes pending for the Timer's code to skip using the
HardwareTimer class altogether.
Switch all enums to be within #defines
This change allows a user to have, for instance, TEMP_4 and TEMP_BED definied but nothing else. The enums which are not defined move "out", allowing the first ones to take the slots in the enum, and since the array is sized on ADC_PIN_COUNT, we always have the right size data and in order.
* Update Malyan M200 pins
Update Malyan M200 pins with correct fan values.
* Test all pins on actual hardware, update definitions
Some of the pin definitions were from knowlege base/pdfs. Now they've been tested against actual hardware. This should be very close to final.
* Update HAL_timers_Stm32f1.cpp
* Add sample configurations for Malyan M200
Add sample configuration for Malyan M200 without bed leveling, and move fan to auto cool E0 since this printer by default has only one fan.
Choose the timer based on MCU defintion. Timer5 is not valid on C8/CB class boards, so use Timer4 for the step timer.
readme.md update
* Updates to timers, and some stm32 boards definitiions
* Correct pin toggle macro.
* Remove duplicated Malyan M200 entry from pins.h
* Update configuration_store.cpp
* Formatting, indentation
* Formatting in HAL_Stm32f1.cpp
2017-12-10 23:12:45 -06:00
Scott Lahteine
204199e1ce
Only compare XYZ to check motion
2017-12-10 23:00:00 -06:00
Scott Lahteine
6686d937fb
Always report position on config load/reset
2017-12-10 21:47:14 -06:00
Scott Lahteine
117fc872a7
Update current position in M852
2017-12-10 21:39:49 -06:00
Scott Lahteine
7d2e850577
Have M420 report a changed position
2017-12-10 21:39:49 -06:00
Scott Lahteine
03ba79f144
Sync and report changed position
2017-12-10 21:39:49 -06:00
Scott Lahteine
5cf6a062e3
Reset timer count before first block step
2017-12-10 18:38:53 -06:00
Scott Lahteine
6149b82119
Allow setting current timer counter
2017-12-10 18:38:53 -06:00
Scott Lahteine
82ef6b5242
Add an option to specify "pulse" timer
2017-12-10 18:38:53 -06:00
Scott Lahteine
b8bc965414
General cleanup HAL timers
2017-12-10 18:38:52 -06:00
Scott Lahteine
69d49a2438
Shorter segments may be better
2017-12-09 06:29:14 -06:00
Scott Lahteine
d576f5408e
Add MiniRAMBo 1.0a board
2017-12-08 23:42:16 -06:00
Scott Lahteine
c40cb52342
Use MB() for Megatronics 3.1
2017-12-08 23:42:16 -06:00
Scott Lahteine
4fa65a5c25
TCNT0 => HAL_timer_get_current_count
...
Fix #8710
2017-12-08 22:35:28 -06:00
AnHardt
b3daf6b5db
[2.0.x] better reverse pass ( #8722 )
...
* repair reverse_pass()
And make it readeble.
This was broken a long time ago.
Not competely unfunctional but far from optimal.
* Minor speedup when calling calculate_trapezoid_for_block
2 float / to 1 foat / and 2 float *
* Various style changes
2017-12-08 21:38:45 -06:00
Roxy-3D
f58eb391aa
[2.0.0] Better off mesh behavior for UBL ( #8714 )
...
* Better off mesh behaviour for UBL
* Suggested ubl.h changes
2017-12-08 19:00:59 -06:00
Jonathan Barchi
cffd052fee
[2.0.x] Fix for #8604 ( #8717 )
...
* Nozzle.cpp: replace incorrect M_2_PI (2/pi) with 2.0 * M_PI
* Use RADIANS(360) instead of 2 * M_PI
2017-12-08 18:50:05 -06:00
Bob-the-Kuhn
65d0f32f82
divide only when required
2017-12-08 18:14:27 -06:00
Scott Lahteine
728acf521c
Followup to #8706
2017-12-08 03:49:33 -06:00
Scott Lahteine
85c6ffbe0d
Discard all "continued" blocks on interrupted move
2017-12-08 02:32:58 -06:00
Scott Lahteine
4e891e9fb7
Followup to #8698
2017-12-08 01:01:12 -06:00
Scott Lahteine
de3d3b9cb1
Put FORCE_INLINE before static
2017-12-08 00:46:22 -06:00
Scott Lahteine
43ea265b78
Merge pull request #8685 from MateuszKrawczuk/patch-3
...
Update TEMP_BED_PIN in MIGHTYBOARD_REVE
2017-12-07 21:50:35 -06:00
Scott Lahteine
ae663a4198
PROBE_DOUBLE_TOUCH => MULTIPLE_PROBING
2017-12-07 16:44:13 -06:00
Scott Lahteine
d7800e7975
Apply MULTIPLE_PROBING to example configs
2017-12-07 16:44:12 -06:00
Scott Lahteine
542efda7db
Merge pull request #8698 from thinkyhead/bf2_replace_jerk_code
...
[2.0.x] Improved Core-compatible jerk code
2017-12-07 00:17:00 -06:00
Scott Lahteine
3cd7659924
Improved Core-compatible jerk code
2017-12-06 23:57:57 -06:00
GMagician
99fcf60977
[2.x] addressing #8644
...
Removed missing include file
2017-12-06 23:49:30 -06:00
Scott Lahteine
81c0a918af
feed_factor => inverse_secs
2017-12-06 23:03:33 -06:00
Scott Lahteine
f206b81cf7
Sanity check skew+UBL
2017-12-06 22:56:58 -06:00
Scott Lahteine
9898b96992
No lcd_map_control flag in quick_stop
2017-12-06 22:23:34 -06:00
Scott Lahteine
840289e7cc
Use block cleaning instead of split flag
2017-12-06 22:22:58 -06:00
Scott Lahteine
90cf6a06be
Simplify G26 user_canceled
2017-12-06 22:02:54 -06:00
Scott Lahteine
cdfabbc507
Shorten error text in G29
2017-12-06 21:50:54 -06:00
Scott Lahteine
c846388a65
Standardize LCD interface code for UBL a little
2017-12-06 21:50:54 -06:00
Scott Lahteine
2fde60da12
Changes for parity with 1.1.x
2017-12-06 21:50:54 -06:00
Scott Lahteine
6040d4080e
Cleanup stepper ISR. Allow cleaning for endstops.
2017-12-06 21:23:37 -06:00
Scott Lahteine
a4e1d83599
Fix M503 S parameter
2017-12-06 21:23:37 -06:00
Scott Lahteine
a3b098b4be
Whitespace clean
2017-12-06 14:02:44 -06:00
AnHardt
a993c5227d
Don't split first_move while homing or probing
...
While homing or probing it might be bad if the stop/trobe triggers during the first part and the second is still in the buffer.
2017-12-06 14:13:05 +01:00
Mateusz Krawczuk
5320906b0b
Update TEMP_BED_PIN in MIGHTYBOARD_REVE
...
Pin K7 number in fastio1280.h is 69, but it's also ADC15 pin.
To get correct value from ADC reading it should be set as 15.
2017-12-06 12:07:20 +01:00
Scott Lahteine
aeb5c623c1
Show "Level Bed Corners" with UBL too
...
Addressing #8676
2017-12-05 21:58:43 -06:00
Scott Lahteine
5fbb2f121e
Remove skew warning that could crash the planner
2017-12-05 20:27:20 -06:00
Richard Wackerbarth
c1184552ac
Change K1 to required option PID_K1
2017-12-05 19:59:59 -06:00
revilor
9e3fbcf35c
fix for #8669 ( #8679 )
...
* fix for #8669
* Update G28.cpp
2017-12-05 19:40:36 -06:00
Scott Lahteine
d8b444c144
Cleanup constextpr in planner.cpp
2017-12-05 18:55:57 -06:00
Scott Lahteine
a2372cfab5
Fix SKEW_CORRECTION without leveling
2017-12-05 18:48:34 -06:00
Scott Lahteine
4d3c3d0b73
Some ST7920 parity with 1.1.x
...
Possibly more should be brought over? Discussion at #8471
2017-12-05 02:22:36 -06:00
Scott Lahteine
3748c28924
Fix MBL G29 without LCD
...
Addressing https://github.com/MarlinFirmware/Marlin/pull/8575#discussion_r154536617
2017-12-05 01:57:45 -06:00
Scott Lahteine
772298257b
Creality pins spacing, MINIPANEL CS pin
2017-12-05 01:57:45 -06:00
Scott Lahteine
b27bc67271
Set initial endstops state
2017-12-05 01:10:31 -06:00
Scott Lahteine
b6ba32ce75
Support for RAMPS Plus (3DYMY)
2017-12-05 00:42:21 -06:00
Scott Lahteine
53694ebaa1
Folllwup to planner splitting
2017-12-04 18:55:23 -06:00
Scott Lahteine
37fff608b0
Merge pull request #8652 from fiveangle/bf2_usbcon_xonxoff
...
[2.0.x] SERIAL_XON_XOFF not supported on USB-native AVR devices
2017-12-04 16:46:18 -06:00
Scott Lahteine
4b612f590c
Split first move to planner for better chaining
2017-12-04 15:27:47 -06:00
Unknown
91b63f6d69
SERIAL_XON_XOFF not supported on USB-native AVR devices
...
User could enable SERIAL_XON_XOFF on USB-native devices and it would not be enabled without warning, but M115 would report the capability as available.
2017-12-04 03:57:01 -08:00
Bob-the-Kuhn
57fac33a74
add explanations
...
1) add explanations as to why software SPIs are selected
2) remove unused flag/option
2017-12-03 20:32:22 -06:00
Bob-the-Kuhn
bb23286383
add README & modify spi_pins.h
...
still trying to fix file name
2017-12-03 20:00:56 -06:00
Scott Lahteine
dd8febca1a
Revert "Merge pull request #8611 from thinkyhead/bf2_planner_split_first"
...
This reverts commit 824980e70eaa7efb96bf
2017-12-03 17:50:19 -06:00
Bob-the-Kuhn
fb44f8e50f
Merge pull request #8616 from hg42/bugfix-2.0.x
...
[2.0.x][LPC1768][FIX] NUM_DIGITAL_PINS was negative, fixes PWM, arduino io functions, M42, M43, M226, probably also Servo, some LCD, soft spi, SoftwareSerial, ... may be others
2017-12-03 14:48:00 -06:00
Bob-the-Kuhn
4c5356f77a
Merge pull request #8622 from hg42/implement-LPC1768-GET_TIMER
...
[2.0.x][LPC1768][fix] Implement GET_TIMER and other GET_xxx, fixes PWM
2017-12-03 14:46:22 -06:00
Harald Gutsche
f5b4e1ef4f
as a workaround enable PWM for any pin, see PR #8622
2017-12-03 20:37:02 +01:00
Scott Lahteine
6e944a413c
Merge pull request #8607 from benlye/patch-1
...
[2.0.x] Fix M49 so that it does not hang the terminal console
2017-12-03 03:41:33 -06:00
Scott Lahteine
967522b95e
Merge pull request #8615 from dot-bob/Duplicator_6-2.0.x
...
[2.0.x] Example configurations for Wanhao Duplicator 6
2017-12-03 03:37:48 -06:00
Scott Lahteine
f4b16a3bac
Update M49.cpp
2017-12-03 03:34:56 -06:00
Scott Lahteine
f9327534f8
Merge pull request #8634 from fiveangle/bf2_report_xonxoff
...
[2.0.x] Report SERIAL_XON_XOFF in M115
2017-12-03 02:18:50 -06:00
Scott Lahteine
da9f140829
Merge pull request #8637 from thinkyhead/bf2_ubl_uses_LSL
...
[2.0.x] Use custom segment length for UBL Cartesian
2017-12-03 01:57:49 -06:00
Scott Lahteine
3a97de52ef
Split first move to planner for better chaining
...
Address #8573 , #8595
2017-12-03 01:27:14 -06:00
Scott Lahteine
24437de591
Use custom segment length for UBL Cartesian
2017-12-03 00:10:54 -06:00
Unknown
4c5ffd2349
[2.0.x] Report SERIAL_XON_XOFF in M115
...
-Report SERIAL_XON_XOFF in Extended Capabilites M115 report for hosts
-Remove outdated 256 size limitation from comments on RX_BUFFER_SIZE defines
-Update error message conditions
2017-12-02 21:08:06 -08:00
Scott Lahteine
aa7efb96bf
Bring configurations up to date
2017-12-02 21:50:51 -06:00
Scott Lahteine
63a91cd37a
Fix a homing comment
2017-12-02 21:02:37 -06:00
Scott Lahteine
8056120195
Rename inverse_mm_s => inverse_secs
2017-12-02 20:28:09 -06:00
Scott Lahteine
23557f8e77
Remove obsolete de_float
2017-12-02 20:23:10 -06:00
Jonathan Barchi
05f8e98c4a
Fix for issue #8629 - mismatch between number of stored and loaded dummy items on non-delta machines. ( #8631 )
2017-12-02 19:04:58 -06:00
Roxy-3D
48fb4e0932
Get Bi-Linear to work with G26
...
More corrections to make that happen...
2017-12-02 14:14:24 -06:00
Roxy-3D
0850b38b45
Get Bi-Linear working with G26
...
G26 uses logic that looks like:
```
ex = _GET_MESH_X(i + 1) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS));
```
The Bi-Linear macros need parenthesis to work correctly.
2017-12-02 14:10:30 -06:00
Scott Lahteine
000b3b3117
Comment/cleanup of motion code
2017-12-02 01:09:55 -06:00
Scott Lahteine
046a1ad331
Merge pull request #8625 from tcm0116/2.0.x-G33
...
[2.0.x] Fix missing return values in G33_auto_tune
2017-12-02 00:51:19 -06:00
Thomas Moore
b35c3b5eb8
Fix missing return values in G33_auto_tune
2017-12-01 21:29:16 -06:00
Scott Lahteine
45c2388a58
Apply const to thermal_runaway_protection args
2017-12-01 19:42:44 -06:00
Scott Lahteine
0154e3480c
New feature: BED_SKEW_CORRECTION
2017-12-01 19:39:49 -06:00
Scott Lahteine
082ab8fcab
Add SKEW_CORRECTION to example configs
2017-12-01 19:22:27 -06:00
Unknown
d1f11e9c10
fix missing GET_TIMER (used by PWM for Ex_AUTO_FAN)
2017-12-01 22:28:55 +01:00
Harald Gutsche
dd1b503f64
fix NUM_DIGITAL_PINS being negative for more than 127 digital pins
2017-12-01 07:39:46 +01:00
dot-bob
bd45d0363d
Add default configurations for the Wanhao Duplicator 6.
2017-11-30 23:24:33 -07:00
Scott Lahteine
91fb6231b2
Fix EEPROM V45 header, layout
2017-11-30 22:45:17 -06:00
Roxy-3D
94e6b2976e
Restore correct G26 values for gMax 1.5+ printer
2017-11-30 18:12:17 -06:00
Scott Lahteine
dd3ce40826
Drop Planner::position_float, use int types
2017-11-30 17:43:31 -06:00
Scott Lahteine
ec6ca37ed3
Fix (un)apply_leveling fade bug
2017-11-30 17:25:44 -06:00
Scott Lahteine
a52fec6ac4
Planner class parity with 1.1.x
2017-11-30 15:55:08 -06:00
Ben Lye
1f3ad461bc
Update M49.cpp
...
Fix M49 so that it does not hang the terminal console.
2017-11-30 20:17:44 +00:00
Scott Lahteine
e37dd64548
Apply LEDColor, language fixes
2017-11-29 23:58:12 -06:00
Scott Lahteine
8f90642eea
LED_CONTROL_MENU config changes
2017-11-29 21:02:56 -06:00
Tannoo
cf0f78336b
New Feature: LED_CONTROL_MENU
2017-11-29 21:02:55 -06:00
Scott Lahteine
23e45fa3c4
Apply const to some planner vars
2017-11-29 21:02:55 -06:00
Scott Lahteine
7c61bcb058
Apply SEGMENT_LEVELED_MOVES to example configs
2017-11-29 16:57:31 -06:00
Scott Lahteine
ef2531558c
Add an option to segment leveled moves
2017-11-29 16:57:30 -06:00
Scott Lahteine
285b868e9b
Tweak planner code style
2017-11-29 15:22:18 -06:00
Scott Lahteine
1f2acc33bc
Tweaks for check_axes_activity
2017-11-28 18:41:13 -06:00
Vitaliy Sapyanov
7f88334aa3
Done cleanup and removed duplicates in pins_RuRAMPS4D.h ( #8582 )
...
Remove duplicates, with followup fixes
2017-11-28 18:33:12 -06:00
Scott Lahteine
a8aa43ce2d
Merge pull request #8587 from AnHardt/2_Fix_WDTO_during_long_DELTA_moves
...
[2.0.x] Fix WDTO during long delta moves
2017-11-28 17:29:18 -06:00
Scott Lahteine
4793c34c53
Fix M290 boolval bug
...
Fix #8577
2017-11-28 17:21:33 -06:00
Scott Lahteine
16baa48699
Fix #8579
...
Fan speed code fell into a curly brace
2017-11-28 16:12:14 -06:00
AnHardt
02aa93a6ad
Fix Watchdog time out during long lasting DELTA moves
...
During long lasting moves of a delta machine neither the temperatures are maintained nor buttons checked nor ... .
The fix is to call 'manage_heater()' and 'idle()' every now and then in the loop where the move is segmented.
The code is abot the same as in G2_G3 wher we had the same problem with too large circles lasting too long.
Fixing #7510
2017-11-28 17:03:51 +01:00
Scott Lahteine
fadf9eb2d7
Simplify midpos calculation
2017-11-27 14:00:35 -06:00
Scott Lahteine
0880031e8e
Satisfy M702 dependencies
2017-11-27 13:39:59 -06:00
Scott Lahteine
0786b61ce7
Followup to #8575
2017-11-27 12:58:40 -06:00
Scott Lahteine
276271e72f
Make MBL work more like PROBE_MANUALLY
2017-11-27 02:12:29 -06:00
Scott Lahteine
94cb412e45
Allow override of probe bounds
2017-11-26 20:55:27 -06:00
Scott Lahteine
c8718aa111
Spacing, macros in LPC1768_PWM
2017-11-26 20:20:05 -06:00
Scott Lahteine
a67cf78c6b
Clean up whitespace, spacing
2017-11-26 20:18:52 -06:00
Scott Lahteine
f0dd4e3fa0
Bootscreen parity with 1.1.x
2017-11-26 20:07:17 -06:00
Scott Lahteine
b634bfe1b1
Tweak to readDir code
2017-11-26 18:25:00 -06:00
Scott Lahteine
7be4857ab9
Tweak BLOCK_BUFFER_SIZE description
2017-11-26 17:36:40 -06:00
Bob-the-Kuhn
7d8b66e207
Merge pull request #8570 from Bob-the-Kuhn/Sbase-PWM
...
[2.0.x] MKS Sbase - add servo pin definitions and add directly controlled PWM
2017-11-26 09:36:18 -06:00
Bob-the-Kuhn
59b32c25b5
MKS Sbase changes
2017-11-26 07:47:06 -06:00
Scott Lahteine
f90c075d1f
SD Menu patches
2017-11-26 01:14:18 -06:00
Scott Lahteine
9b64be0bc5
Fixes for leveling sub-menus
2017-11-26 00:05:36 -06:00
Scott Lahteine
25674da90c
Tweaks to do_blocking_move
2017-11-25 23:31:16 -06:00
Scott Lahteine
22b897e77d
Show M211 output with workspace offset
2017-11-25 20:48:20 -06:00
Scott Lahteine
d06e29846d
Loosen HAS_BED_PROBE definition
2017-11-25 20:11:21 -06:00
Roxy-3D
e48fcad615
change G26 and G29 bit function names to avoid HAL collision
2017-11-25 19:58:45 -06:00
Scott Lahteine
41ec449960
Fix G26 error return
2017-11-25 19:53:14 -06:00
Scott Lahteine
9badf5dc0d
Fix Micromake C1 config
2017-11-25 18:41:07 -06:00
Scott Lahteine
7576ad7fc2
Merge pull request #8554 from tcm0116/2.0.x-cleanup
...
[2.0.x] Fix for #8525 and other cleanup
2017-11-25 18:19:54 -06:00
Scott Lahteine
27c5692b13
Syntax tweaks
2017-11-25 18:13:36 -06:00
Scott Lahteine
d18d40e1d6
M290 report on change, P0 to leave Probe Z Offset alone
2017-11-25 16:47:39 -06:00
LVD-AC
65f365333f
[2.0.x] G33 probe error handling
2017-11-25 16:19:10 -06:00
Bob-the-Kuhn
8c69adba8b
Merge pull request #8553 from Bob-the-Kuhn/2.0.x-U8Glib-follow-up
...
[2.0.X] U8Glib follow up
2017-11-25 14:26:32 -06:00
Scott Lahteine
be00e421a7
Patch up M290, M851
2017-11-25 14:11:57 -06:00
Bob-the-Kuhn
fc40d56131
fixed error, updated defaults, added notes
...
Travis fix - only allow ultralcd_st7920_u8glib_rrd_AVR.cpp to compile when ST7920 selected
2017-11-25 12:35:03 -06:00
Roxy-3D
d29cb646e3
Fix erroneous reference to temperature in time calculations
...
Travis is having problems at: https://github.com/MarlinFirmware/Marlin/pull/8560
So... doing a direct commit to get things correct. Bugfix_v1.1.x does not have this bug. Nothing needs to be done to that branch.
2017-11-25 10:40:56 -06:00
Thomas Moore
7bb1721f35
Fix _BV already defined warnings for Teensy
2017-11-24 22:34:39 -06:00
Thomas Moore
5f9592a523
Cleanup narrowing warning in pin_is_protected
2017-11-24 22:15:56 -06:00
Thomas Moore
34eaaab5fb
Fix _BV already defined warnings
2017-11-24 21:59:31 -06:00
Thomas Moore
2ea779e560
Allow bed probe sanity checks to run
2017-11-24 21:59:01 -06:00
Scott Lahteine
d24b1190bd
Don't use Z_MIN_PROBE_ENDSTOP on DELTA
2017-11-24 18:24:22 -06:00
Scott Lahteine
e34c6827ea
Init MIXING virtual tools as switching
2017-11-24 18:02:09 -06:00
Scott Lahteine
a9ecb975b2
Apply LINEAR_UNIT to M503 output for M200
2017-11-24 17:32:48 -06:00
Scott Lahteine
d95ee0f003
Merge pull request #8551 from revilor/bugfix-2.0.x
...
MK2_MULTIPLEXER does not require E2/E3 stepper pins
2017-11-24 17:16:23 -06:00
Scott Lahteine
80ada58818
One fewer function call in probe_pt
2017-11-24 17:10:38 -06:00
oliver
92a0dc552a
MK2_MULTIPLEXER does not require E2/E3 stepper pins
2017-11-24 23:56:39 +01:00
Scott Lahteine
b49acce035
Tweaks for lcd_external_control
2017-11-24 15:53:25 -06:00
Scott Lahteine
1ef1052ae1
Phatter arrows for Z offset overlay
2017-11-24 15:53:25 -06:00
Scott Lahteine
5926c9c97b
Followup for MESH_EDIT_GFX_OVERLAY
2017-11-24 15:53:25 -06:00
Scott Lahteine
ab03a31cc9
Patch G0/G1 for NANODLP_Z_SYNC
2017-11-24 14:11:12 -06:00
Scott Lahteine
a766dfb3b1
Merge pull request #8536 from thinkyhead/bf2_nanodlp_z_move_sync
...
[2.0.x] Implement NANODLP_Z_SYNC for 2.0.x
2017-11-24 13:11:14 -06:00
Scott Lahteine
01e207213f
Fix MK2_MULTIPLEXER stepper indirection
2017-11-24 12:49:28 -06:00
Roxy-3D
ec04cf27d3
Fix the G26 out of scope identifiers in the v2.0.0 branch ( #8543 )
...
These changes may need to be warmed over. I tried to fix things with
the least amount of disruption. I just wanted to get the bugfix_v2.0.0
branch working for people again.
2017-11-24 10:39:56 -06:00
Scott Lahteine
dc82babe8e
Implement NANODLP_Z_SYNC for 2.0.x
2017-11-24 00:28:06 -06:00
Scott Lahteine
c6b0c104bb
Adapt G26 to work for all meshes
2017-11-23 22:31:37 -06:00
Scott Lahteine
5ce7f23afa
Config option G26_MESH_VALIDATION for all meshes
2017-11-23 21:43:23 -06:00
Scott Lahteine
c19eb33408
Move G26 to gcode sub-folder
2017-11-23 21:43:23 -06:00
Scott Lahteine
a03f93bab4
Fix fan kickstart
2017-11-23 21:42:45 -06:00
Scott Lahteine
9e3c41f9e8
Tweak fan kickstart / speed code
2017-11-23 15:20:35 -06:00
GMagician
118ac61e59
[2.0.x] Tool change bad behaviour fix
...
Previous fix did not work as expected when axeis not homed. It raise Z but never return to original position
2017-11-22 20:24:03 -06:00
Scott Lahteine
c35d27f77c
Merge pull request #8299 from tcm0116/2.0.x-BIQU_BQ111-A4
...
[2.0.x] Add BIQU BQ111-A4 board
2017-11-22 19:16:04 -06:00
Scott Lahteine
1685cd193b
Tweak char_mode init
2017-11-22 19:12:08 -06:00
Scott Lahteine
9406c87a97
Fix up LCD init / charset
2017-11-22 18:22:55 -06:00
Thomas Moore
fa577392b2
Add BIQU BQ111-A4 board
2017-11-22 16:34:59 -06:00
Scott Lahteine
c2fc78c3a8
#ifndef => #if !PIN_EXISTS
2017-11-22 16:28:52 -06:00
Scott Lahteine
c613a1ed38
Fix indentation, stepper.h dependency, etc.
2017-11-22 14:55:30 -06:00
teemuatlut
f011a32771
Board definitions for Ultratronics Pro v1.0
2017-11-22 14:55:24 -06:00
Bob-the-Kuhn
9dad534f02
fixed
2017-11-21 21:37:20 -06:00
Scott Lahteine
4371345cbe
Don't re-init graphical LCD after boot screen
...
Followup to 13a3fb1acc
2017-11-21 18:23:39 -06:00
Scott Lahteine
56c02b7f59
Shift register buttons question
...
Can LCD shift registers keep up with faster MCUs?
2017-11-21 16:12:40 -06:00
Scott Lahteine
3994d3b935
General cosmetic LCD
2017-11-21 16:12:40 -06:00
Scott Lahteine
617993d0ea
Patch for !!TEST (was _BV once?)
2017-11-21 16:12:08 -06:00
Scott Lahteine
3269d8dd62
Tweak M42 var
2017-11-21 16:12:08 -06:00
Mateusz Krawczuk
bb1a6eea88
Remove pin count check for MIGTHYBOARD_REVE
...
Remove assert and unused code since it is implemented in pinsDebug_plus_70.h
2017-11-21 14:38:02 +01:00
Scott Lahteine
1ce0fb336b
Patch Max7219_LED_Set input args
2017-11-20 21:15:15 -06:00
GMagician
a61127a421
[2.0.x] tool change bad behaviours
...
This will solve 2 issues on tool change.
1) when no home is done ("no_move" is set) tool change should never move X & Y because... I don't know where I am...only Z should be adjusted to avoid bed collision if other nozzle is lower than current.
Since no move no bed level matrix should be applied
2) When SWITCHING_NOZZLE is enabled and system is homed there are two movements to go to destination, but first can move Z to older position and then crash on the bed
2017-11-20 16:34:55 -06:00
Vitaliy Sapyanov
e2724c68ab
Update pins_RURAMPS4D.h
...
Add and bugfix pins
2017-11-20 15:36:13 -06:00
Scott Lahteine
9770062309
Merge pull request #8463 from thinkyhead/bf2_32bit_M42
...
[2.0.x] Updates to Anet A8 configurations
2017-11-20 15:12:30 -06:00
Scott Lahteine
3066655727
Try port*100+pin, fix config dependency
2017-11-20 13:58:23 -06:00
Scott Lahteine
ba8bc7ea80
Cosmetic tweaks
2017-11-20 13:58:02 -06:00
Scott Lahteine
f409147116
Fix P2_04, P2_05
2017-11-20 13:58:02 -06:00
Bob-the-Kuhn
a28ccabe2a
M42 P1.20 fix
2017-11-20 13:58:02 -06:00
Unknown
33912fa7e8
Update Temperature::setPwmFrequency prototype to match source
...
Introduced with #8446
2017-11-20 01:50:41 -08:00
Scott Lahteine
b9327a4d16
Misc. general cleanup
2017-11-19 15:43:39 -06:00
Scott Lahteine
8836623e0f
Fix sq/min/max macros after platform headers
2017-11-19 15:43:39 -06:00
Scott Lahteine
fe4f009fdd
32-bit unless…
2017-11-19 15:43:38 -06:00
Scott Lahteine
25af9decfe
Remove enum.h include of MarlinConfig.h
2017-11-19 15:43:38 -06:00
Scott Lahteine
1d4571b88d
Dependency adjustments
2017-11-19 15:43:38 -06:00
Scott Lahteine
550f1025f0
Try using <Arduino.h> everywhere
2017-11-19 14:23:02 -06:00
Scott Lahteine
c0000a0cdc
Move servo code to modules/servo.*
2017-11-19 14:23:02 -06:00
Scott Lahteine
81bc428b48
Don't compile custom u8g without DOGLCD
2017-11-19 13:58:38 -06:00
Bob-the-Kuhn
c14000775b
PWM fixes, slow down fan update
...
include LPC1768 syntax for M42
couple more pin_t changes
consistency
change M42 to R, P format
Revert "change M42 to R, P format"
This reverts commit 01f12f579ec9ccc1bb9126e68d2c86449e9b7edf.
2017-11-18 07:05:50 -06:00
Scott Lahteine
60adc6ff02
Display filwidth ratio in terms of E mm
2017-11-18 07:01:49 -06:00
Scott Lahteine
6e533748eb
Fixes #8472
2017-11-18 05:15:55 -06:00
Scott Lahteine
485abb023b
Merge pull request #8456 from thinkyhead/bf2_wednesday_tweaks
...
[2.0] No retroactive adjustment with M851 Z
2017-11-18 04:49:53 -06:00
Scott Lahteine
3bba7d60f3
No retroactive changes with M851 Z
...
If using babystep to adjust the Z probe offset, the axis will move and the mesh will be updated at the same time, causing a doubling of the Z offset over the rest of the print.
To correct for this, the current Z position would need to be modified in the opposite direction, canceling out the additional Z offset added to the mesh. This would be confusing to users, and moreover it would not be accurate without also taking the current Z fade level and current Z height into account.
It might make sense to change the mesh in the case where no babystepping is taking place, but this could be considered an undesirable side-effect of changing the `zprobe_zoffset`.
One way to remedy this would be to return to storing the mesh with `zprobe_zoffset` included, then subtracting `zprobe_zoffset` from the returned Z value. Thus, a babystep moving the Z axis up 1mm would subtract 1 from `zprobe_zoffset` while adding 1 to all mesh Z values.
Without including the `zprobe_zoffset` in the `z_values` there is no safe way to alter the mesh in conjunction with babystepping, although it's fine without it.
2017-11-18 03:36:39 -06:00
Scott Lahteine
32512332df
Apply some formatting
2017-11-18 03:12:30 -06:00
Scott Lahteine
7dacc999b9
Remove obsolete show_bootscreen var
2017-11-17 17:01:43 -06:00
Roxy-3D
9729528d13
Update UBL's Delta Probable locations
...
This is a non-intuitive change. @oldmcg says in this post https://github.com/MarlinFirmware/Marlin/issues/7572#issuecomment-340641207 that using DELTA_PRINTABLE_RADIUS is better than DELTA_PROBABLE_RADIUS for setting the probe limits. This is because the automatic probe code checks all locations for being reachable by the probe prior to doing the probe.
2017-11-17 16:44:57 -06:00
Scott Lahteine
d48cb6bf41
Apply coding standards to Max7219
2017-11-17 15:32:21 -06:00
Scott Lahteine
bd8bcf06e7
Updates to Anet A8 configurations
...
Based on #8426
2017-11-16 23:19:36 -06:00
Bob-the-Kuhn
7eea000f4b
E0 auto fan fixes
2017-11-16 18:42:56 -06:00
Scott Lahteine
b2dda096fe
Fix FILAMENT_LCD_DISPLAY for disabled state
2017-11-16 16:57:48 -06:00
Scott Lahteine
1e8afb66b7
Fix a planner comment
2017-11-16 16:57:47 -06:00
Scott Lahteine
50f09cc029
Miscellaneous cleanup
2017-11-16 00:47:16 -06:00
Scott Lahteine
63257dc083
Fix M503 output for M145
...
Fixes #7978
2017-11-15 04:00:18 -06:00
Scott Lahteine
0918dae66e
Add OV() macro for use in thermistor tables
2017-11-15 03:15:18 -06:00
Scott Lahteine
24057270a3
Merge pull request #8420 from RowanMeara/rm-dithering-2.0.x
...
[2.0.x] Fix Software Fan PWM
2017-11-15 02:30:19 -06:00
Scott Lahteine
5079a02c90
Add HAL_SERVO_LIB to HAL_Due.h
2017-11-15 02:07:01 -06:00
Scott Lahteine
9c3761047e
Merge pull request #8434 from thinkyhead/bf2_fix_M32_subroutines
...
[2.0] Fix 'M32 P' subroutines
2017-11-15 01:15:02 -06:00
Scott Lahteine
e0d367f1fb
Fix M32 P subroutine handling
2017-11-15 00:44:21 -06:00
Scott Lahteine
9f8b4c5ee8
Patch SD lib files for readability
2017-11-15 00:44:21 -06:00
Scott Lahteine
2c8c30437e
Fix parser parameter value handling
2017-11-14 23:20:33 -06:00
RowanMeara
6131533157
Change dithering behavior to intended.
2017-11-14 00:47:07 -08:00
Scott Lahteine
e70b44dc0b
Make sure leveled[] is defined for later use
2017-11-14 02:13:38 -06:00
Scott Lahteine
54774841ba
Merge pull request #8416 from thinkyhead/bf2_M114_DETAIL
...
[2.0] Add M114_DETAIL to Configuration_adv.h
2017-11-14 00:28:55 -06:00
Scott Lahteine
009e3a7aa7
Add M114_DETAIL to Configuration_adv.h
2017-11-14 00:03:17 -06:00
Scott Lahteine
6d6c3b1e97
Fix up REPRAPWORLD_KEYPAD defines
2017-11-13 22:14:54 -06:00
Scott Lahteine
3f0a982b8c
Move Filament Width Sensor to Configuration_adv.h
2017-11-13 21:05:57 -06:00
Scott Lahteine
b76e173205
Move test extrusion options under G26
2017-11-13 21:05:57 -06:00
Scott Lahteine
14ebedca27
Drop unused LARGE_FLASH option
2017-11-13 15:44:24 -06:00
Scott Lahteine
b7feb53e8a
Support for Extrudrboard in Printrboard Rev.F
2017-11-13 15:44:23 -06:00
Scott Lahteine
91baca6abb
Patches for compiler warnings/errors
2017-11-13 04:43:47 -06:00
Scott Lahteine
2f73dec077
Apply native workspace fixes for G92, G53-59
2017-11-13 02:09:12 -06:00
Scott Lahteine
04abd8d459
Improve and clarify M428 code
2017-11-13 02:09:11 -06:00
Dave Johnson
c009a990e4
[2.0.x] Fix some 8-bit Teensyduino compile warnings ( #8385 )
...
* Fix some 8-bit Teensyduino compile warnings
-Override Teensyduino legacy NOT_A_PIN 127 define
-some fixups for Printrboard_RevF pins
* Proper cleanup of Printrboard Rev.F pins
* Apply LCD fixes to Printrboard v1
2017-11-13 01:07:59 -06:00
Scott Lahteine
e8e92f8969
No leveling data in M114 if no leveling is enabled
2017-11-12 23:03:38 -06:00
Scott Lahteine
f5d210c35c
Fix report_current_position
2017-11-12 23:02:53 -06:00
Roxy-3D
faaae7a1b2
Provide more clearance for BL-Touch probe
2017-11-12 13:11:22 -06:00
Scott Lahteine
06ee6584fd
Remove offsets from soft endstops, tool change
2017-11-11 22:47:38 -06:00
Scott Lahteine
c938273bd5
Coding standard patch of M290
2017-11-11 22:14:21 -06:00
Scott Lahteine
98c1265e3b
Disable laser power when PWM goes to 0
2017-11-11 22:00:22 -06:00
Scott Lahteine
d4a1154c25
Use do_blocking_move_to where possible
2017-11-10 20:55:23 -06:00
Scott Lahteine
36426af564
Merge pull request #8356 from tcm0116/2.0.x-M600
...
[2.0.x] Normalize load/unload length in M600
2017-11-10 19:44:08 -06:00
Scott Lahteine
1ed86adf9c
Cleanup around updatePID
2017-11-10 19:27:34 -06:00
Scott Lahteine
75a58ee4b8
Fix position_is_reachable bug in waiting
2017-11-10 19:27:33 -06:00
LVD-AC
e334efb2a7
PROBE_MANUALLY etc.
2017-11-10 19:27:33 -06:00
Bob-the-Kuhn
b6415dc169
finish
2017-11-10 14:39:55 -06:00
Scott Lahteine
0efa66be0b
Updates to Traditional Chinese
...
From @cheton at #8347
2017-11-10 04:52:20 -06:00
Scott Lahteine
cba9c1cf9e
Add pre-calculated planner.e_factor
2017-11-10 03:14:24 -06:00
Thomas Moore
600c85226e
Normalize load/unload length in M600
2017-11-10 02:31:46 -06:00
Scott Lahteine
81b91b3f9d
Clean up some trailing white-space
2017-11-10 02:31:04 -06:00
Roxy-3D
2f9848ede3
Correct gMax 1.5+ example file
...
And... Keep both branches in synchronization.
2017-11-09 23:44:14 -06:00
Scott Lahteine
006dad4b52
Add pins_RURAMPS4D.h & change pins.h
...
http://3dtoday.ru/blogs/svs0724/ruramps4d-ramps-for-adruino-due-the-pilot-shipment-available-for-zack/
2017-11-09 21:51:06 -06:00
Scott Lahteine
00514857e9
SBASE serial port -1, RAMPS spacing
2017-11-09 21:41:07 -06:00
Scott Lahteine
c66696c507
Merge pull request #8344 from tcm0116/2.0.x-delta_height
...
[2.0.x] Add delta_height variable in lieu of using home_offset
2017-11-09 01:21:53 -06:00
Scott Lahteine
22e18fe832
Patch _manual_goto_xy for kinematics
2017-11-08 22:21:38 -06:00
Scott Lahteine
0cfb936dd1
Clarify some motion code
2017-11-08 22:15:55 -06:00
Thomas Moore
f34c3597dc
Add delta_height variable in lieu of using home_offset
2017-11-08 22:10:08 -06:00
Bob-the-Kuhn
d47fbf791b
Arduini IDE compatibility changes
...
changed includes to make Arduino IDE happy
2017-11-08 20:49:49 -06:00
Scott Lahteine
95ea43bde4
Update XYZ dual stepper configurations
2017-11-08 20:31:43 -06:00
Scott Lahteine
b0b4a20930
Tweaks to core motion code
2017-11-08 20:09:09 -06:00
Scott Lahteine
8805e24cc7
Fix tilt_mesh_based_on_probed_grid output bug
2017-11-08 20:06:20 -06:00
Scott Lahteine
24437fbb13
Fix G26 Y argument bug
2017-11-08 19:20:10 -06:00
Scott Lahteine
09b05c9d79
Merge pull request #8321 from Bob-the-Kuhn/pins_re-arm
...
2.0.x - pins_RAMPS_RE_ARM.h - add mega2560 pin numbers
2017-11-08 13:11:13 -06:00
Scott Lahteine
e6788bb6ae
Fix get_destination_from_command for E
2017-11-08 12:54:00 -06:00
Roxy-3D
967104e1ce
Default Extrusion Settings were off a few lines in some of the example config files. ( #8333 )
2017-11-08 11:56:00 -06:00
Bob-the-Kuhn
8875885a15
pins add old names
...
fix typo
re-write PWM section, add "not on Re-ARM" list
2017-11-08 11:11:38 -06:00
Roxy-3D
1c6e83c137
if !HAS_MESH we still need to do some motion! ( #8328 )
...
* if !HAS_MESH we still need to do some motion!
Thank You MagoKimbra !
* Ooops.... need #else and not #elif
2017-11-08 09:42:21 -06:00
Scott Lahteine
82f45c3e6a
Patch G33 misuse of PROBE_MANUALLY
2017-11-08 00:36:06 -06:00
Scott Lahteine
064e6fe60e
Remove debugging pin toggle from LCD code
2017-11-07 23:00:54 -06:00
Bob-the-Kuhn
0483a7df91
AVR RRD works
...
LPC1768 VIKI2 & RRDFG are working
looks like all SPIs are working
library change
sh1106 locks up
fixed lockup, started I2C SW com
pretty
re-org
restore a few files
make library happy
switched HAL version of rrd
fix travis error
travis error fixes
another travis fix
cleanup
minor update
one more
correct spacing in platformio.ini
2017-11-07 18:40:29 -06:00
Scott Lahteine
96c9d715f3
Patch abuse of sprintf_P in G33
2017-11-07 17:33:50 -06:00
Roxy-3D
ed62c621d7
Fix G26 Circle Drawing. Add Default Extrusion Settings ( #8313 )
...
- Fix G26 Circle Drawing.
- Add default extrusion settings so machine can print lines on print bed
- Yet to be done: Get LCD Menu's to use these settings.
2017-11-07 17:13:53 -06:00
Scott Lahteine
8fea26aa9d
Fix PID_autotune watch temp increase value
2017-11-07 15:51:48 -06:00
Scott Lahteine
2c099fd4c2
Update Thermal Protection Documentation
2017-11-07 15:46:44 -06:00
Colten Edwards
a6160916b0
[2.0] Fix M48 for delta printers/ABL compile issue ( #8286 )
...
* fix M48 for delta printers
fix M48 for delta printers. home printer if not already homed.
* remove ENABLED(DELTA)
remove ENABLED(DELTA) as it is not needed.
* Update M48.cpp
* abl needs queue.h
without queue.h abl will not compile since there is a script that runs at the end of it and we need to queue it up.
2017-11-07 15:36:33 -06:00
Scott Lahteine
17ef0a513b
Update G92 for native workspace
2017-11-07 13:07:16 -06:00
Scott Lahteine
b4bf8928aa
German language updates
...
Corresponding to #8306
2017-11-07 12:10:29 -06:00
Thomas Moore
73ca5345e1
Fix Delta EEPROM
2017-11-07 16:48:21 +00:00
Scott Lahteine
714d2b9bbc
Merge pull request #8297 from thinkyhead/bf2_M118_and_others
...
[2.0] Fix M118, compiler warnings, etc.
2017-11-06 23:25:49 -06:00
Alexey Shvetsov
83555933aa
Add platformio support for stm32 ( #8246 )
...
[2.0] Add platformio support for stm32
2017-11-06 23:03:59 -06:00
Scott Lahteine
85a62bbf46
Misc. fixes to compiler warnings, etc.
2017-11-06 22:57:05 -06:00
Scott Lahteine
e6aba99f16
Fix M118 parameters, with strict guideline
2017-11-06 22:57:01 -06:00
Scott Lahteine
e9b1944a67
Patch non-extended font option
2017-11-06 21:42:21 -06:00
Roxy-3D
6324b09934
Revert "Fix EEPROM crc ( #8284 )" ( #8292 )
...
This reverts commit 172c36f517
2017-11-06 19:52:05 -06:00
Rowan Meara
172c36f517
Fix EEPROM crc ( #8284 )
2017-11-06 19:19:30 -06:00
Scott Lahteine
cc4d28b73c
Update bilinear for native workspace
2017-11-06 17:04:41 -06:00
Scott Lahteine
94c7205d64
Merge pull request #8281 from thinkyhead/bf2_alligator_dac
...
[2.0] Use fastio for Alligator dac084s085, etc.
2017-11-06 12:16:18 -06:00
Scott Lahteine
2246316605
Fix name collision. timer_t => hal_timer_t
2017-11-05 19:31:07 -06:00
Jason Hitesman
4efaef7039
[2.0.x] Fix archim2 SSDS define ( #8278 )
...
* Fix SSDS define
* Update pins_ARCHIM2.h
2017-11-05 19:23:19 -06:00
Scott Lahteine
c8dfa26bc8
Use fastio for STM32F1 endstop interrupts
2017-11-05 19:20:28 -06:00
Scott Lahteine
185dec800b
Use fastio for HAL SPI EEPROM
2017-11-05 19:20:03 -06:00
Scott Lahteine
297666ea14
Use fastio for Alligator dac084s085
2017-11-05 19:14:42 -06:00
Scott Lahteine
c5d95d318b
Merge pull request #8249 from thinkyhead/bf2_nozzle_cleanup
...
[2.0] Cleanup Nozzle class, fix XY vs Z move order
2017-11-05 18:51:11 -06:00
Scott Lahteine
7e2fee9d56
Merge pull request #8274 from tcm0116/2.0.x-re_arm_D8
...
[2.0.x] Correct RAMPS_D8_PIN for Re-ARM
2017-11-05 18:39:28 -06:00
Scott Lahteine
59c558d612
Merge pull request #8275 from GMagician/2.0.x-Typo-fix
...
[2.0.x] typo fix (removed spaces)
2017-11-05 18:39:04 -06:00
Scott Lahteine
be73d5cc08
Cleanup Nozzle class, fix XY vs Z move order
2017-11-05 18:31:07 -06:00
GMagician
9e93b7ccbd
[2.0.x] removed spaces
...
Removed spaces in array declaration
2017-11-05 20:42:48 +01:00
Thomas Moore
b91a822d7a
Correct RAMPS_D8_PIN for Re-ARM
2017-11-05 13:03:42 -06:00
studiodyne
d295f984e3
Update fwretract.cpp
2017-11-05 15:42:30 +01:00
Scott Lahteine
1b40e9c464
Implement CNC_COORDINATE_SYSTEMS
2017-11-04 22:28:46 -05:00
Scott Lahteine
1b42fba39b
Add CNC_COORDINATE_SYSTEMS to configs
2017-11-04 22:28:46 -05:00
Scott Lahteine
a22434508f
Match tweaks to G33 from 1.1
2017-11-04 22:28:46 -05:00
Scott Lahteine
c07bbd4154
Prettify some EEPROM code
2017-11-04 22:28:46 -05:00
Scott Lahteine
d6aa127c76
Remove I2CPEM workspace offset
2017-11-04 22:28:46 -05:00
Scott Lahteine
79772219ae
Fix Fan Multiplexer init
2017-11-04 22:28:46 -05:00
Scott Lahteine
ca7d36d9ed
RAMPS pins for ANET_KEYPAD_LCD
2017-11-04 21:22:53 -05:00
Colten Edwards
e0a6ee8da5
[2.0] Fix up G33, LPC1768 + SDCARD_SORT_ALPHA ( #8250 )
...
* Update Conditionals_post.h
* Add a cast to round() to convert to a unsigned int
Add's a cast to round() so that it will compile properly. round() returns a float which must be cast to a integer for the following % operation. Use a unsigned int as a negative index to an array is wrong. Should never be more than 255 points allowing us to use a 8 bit cast.
* Update G33.cpp
2017-11-04 18:04:18 -05:00
Scott Lahteine
dac1f6fe74
Tweaks to cubic_b_spline code style
2017-11-04 14:46:10 -05:00
Scott Lahteine
4df024d7b9
Merge pull request #8234 from thinkyhead/bf2_native_operation
...
[2.0.x] Operate in Native Machine Space
2017-11-04 14:31:44 -05:00
Scott Lahteine
601ccded89
Fix case-insensitive config issue
2017-11-04 14:10:13 -05:00
Scott Lahteine
f8393a0908
Operate in Native Machine Space
2017-11-04 00:05:38 -05:00
Scott Lahteine
d83a9a53e8
Merge pull request #8220 from thinkyhead/bf2_serial_port_-1
...
[2.0] Add SERIAL_PORT -1 option for configurators
2017-11-03 15:25:12 -05:00
Scott Lahteine
93ba72ea83
Add SERIAL_PORT -1, set on SBASE, STM32F103RET6
2017-11-03 15:22:45 -05:00
Scott Lahteine
7e43dd1d23
Fix probes configuration url
...
Based on #8241 by @machaj
2017-11-03 13:35:40 -05:00
AnHardt
ca0e4b4e96
Some cleanup around 'lcd_bootscreen()' and 'lcd_kill_screen()'
...
Move 'lcd_bootscreen()' from `lcd_init()` to 'setup()' where it is cexecute exactly once. Saves 'bool show_bootscreen'.
Move the call of 'lcd_custom_bootscreen()' to the begin of 'lcd_bootscreen()'.
Move the delays into the related functions.
Move the picture loop around 'lcd_kill_screen()' into the function.
2017-11-03 12:02:48 +01:00
Scott Lahteine
84b93d941f
Merge pull request #8178 from thinkyhead/bf2_config_tweak
...
[2.0.x] Faster menu navigation for Anet A8
2017-11-03 04:49:17 -05:00
teemuatlut
70be4d206e
[2.0.x] UltiMachine Archim2 ( #8190 )
...
* UltiMachine Archim2 support
* SPI gets included by the library
* Invert TMC2130 diag pin state
* Clean up Archim2 pins
* Update Archim2 config
* FAN2 -> FAN1
* Cleanup
* Add brief Archim installation instructions
* Bring pins into compliance
* Update 1.0 SD Detect pin for 1.1
* Update Configuration.h
* Update pins_ARCHIM2.h
2017-11-03 04:48:15 -05:00
Scott Lahteine
f3deb37bdf
Merge pull request #8236 from thinkyhead/bf2_protect_M303
...
[2.0.x] M303 thermal runaway protection
2017-11-03 04:42:14 -05:00
Scott Lahteine
31f112cf58
Cleanup trailing whitespace
2017-11-03 04:07:45 -05:00
Scott Lahteine
2f9e42feb9
M303 thermal runaway protection
2017-11-03 03:57:46 -05:00
Scott Lahteine
e5ae545647
Remove ADCKey steps acceleration
2017-11-03 03:41:55 -05:00
Luc Van Daele
6827e243a0
[2.0.x] G33 magic numbers ( #8171 )
...
* [2.0.x] G33 magic numbers
* oops
* Comments
* oops
* warning
* better comment section
* remarks
* extra grids
2017-11-03 03:36:16 -05:00
Scott Lahteine
8735ae984b
Merge pull request #8227 from tcm0116/2.0.x-pin_mapping
...
LPC1768: updates to use the new pin_t typedef
2017-11-03 03:10:19 -05:00
AnHardt
c72a0610b4
Fix watchdog in WATCHDOG_RESET_MANUAL mode AVR
2017-11-03 04:43:00 +01:00
Thomas Moore
13d839795c
LPC1768: updates to use the new pin_t typedef
2017-11-02 18:43:57 -05:00
Scott Lahteine
eb13b8d985
Add MKS Gen L board
2017-11-02 17:06:08 -05:00
Morten
063e957fc4
Update pins_MKS_SBASE.h ( #8188 )
...
* Update pins_MKS_SBASE.h
Deleted E_MUX2, not used.
Changed #define LCD_PINS_D4 P0_14 // EXP1.5 to #define LCD_PINS_D4 P0_15 // EXP1.5, wrong in MKS's pinout schematic.
Swapped TEMP_BED_PIN and TEMP_0_PIN port's, request from user, more logical...
* Update pins_MKS_SBASE.h
Moved MUX signals to J8 and re added MUX2, cleaner wiring..
2017-11-02 13:50:23 -05:00
Scott Lahteine
f7133e53fd
Fix case light off
...
Addressing #8205
2017-11-01 21:22:15 -05:00
Scott Lahteine
0108d5181f
Allow asterisks in G-Code commands
...
Addressing #6655
2017-10-31 21:20:41 -05:00
Scott Lahteine
34745b2183
Organize boards.h by architecture
2017-10-31 16:10:38 -05:00
android444
9cc1d8e312
[2.0.x] Support for SilverGate Board
2017-10-31 15:27:26 -05:00
Scott Lahteine
03e5369411
Faster menu navigation for Anet A8
...
Addressing #8166
2017-10-31 14:46:55 -05:00
Scott Lahteine
f1edf83720
Merge pull request #8187 from rafaljot/patch-5
...
Update InterruptVectors_Due.cpp
2017-10-31 14:14:08 -05:00
Scott Lahteine
b2bd77c40a
Merge pull request #8191 from thinkyhead/bf2_rearm_more
...
[2.0.x] Add SDCARD_SORT_ALPHA options for LPC1768
2017-10-31 14:12:14 -05:00
Scott Lahteine
571ced712d
Add SDCARD_SORT_ALPHA options for LPC1768
2017-10-31 14:05:40 -05:00
rafaljot
778e4e4c23
Update InterruptVectors_Due.cpp
...
const pfnISR_Handler *isrtab = get_relocated_table_addr();
What compiler do you use? Arduino 1.8.5 can't compile this "const".
2017-10-31 15:00:06 +01:00
Scott Lahteine
cae8703e0d
Merge pull request #8181 from thinkyhead/bf2_fix_bootscreen_repeat
...
[2.0.x] Only show custom bootscreen once
2017-10-31 02:37:40 -05:00
Scott Lahteine
a516856df9
Only show custom bootscreen once
2017-10-31 01:47:30 -05:00
GMagician
727a403ba1
[2.0.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour ( #8176 )
...
* [2.0.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour
NO_MOTION_BEFORE_HOMING should prevent XYZ movements only when homing is not done.
E axes should be allowed
* Update G0_G1.cpp
* Update G0_G1.cpp
2017-10-30 22:50:22 -05:00
Alexey Shvetsov
577659cacf
Basic support for Azteeg_X5_GT ( #8139 )
...
* Basic support for Azteeg_X5_GT
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
* Add fan pins for AZTEEG X5 GT
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
* Fix endstop pins
* Add servo0 pin
2017-10-30 16:01:20 -05:00
Scott Lahteine
0b02f9cc33
Merge pull request #8168 from thinkyhead/bf2_config_tweak
...
[2.0.x] Apply Re-ARM SPI review items
2017-10-30 15:49:50 -05:00
Scott Lahteine
04c0d9f3c3
Implement kinematic software endstops
2017-10-30 15:16:30 -05:00
Scott Lahteine
9f89b5d876
Fix for MAX_VFAT_ENTRIES sanity check
2017-10-30 15:11:47 -05:00
Scott Lahteine
2cdde08339
Apply items specified in code review
...
Followup to #8122
2017-10-30 15:03:07 -05:00
Scott Lahteine
34be5d33c0
The plural of 'axis' is 'axes'
2017-10-30 14:21:43 -05:00
Bob-the-Kuhn
6e5f13a5c2
Merge pull request #8122 from Bob-the-Kuhn/2.0.x-restore-Re-ARM-RepRap-Discount-Full-Graphics-fix-(partial-solution)
...
2.0.x - Restore fix for garbaged display on Re-ARM with RepRap Full Graphics Smart Controller
2017-10-30 13:16:16 -05:00
Bob-the-Kuhn
b7a66742dd
tested
...
add sort alpha section to other LPC1768 boards
2017-10-30 13:01:19 -05:00
Jeffrey Li
bbc2e66634
Fix AZSMZ MINI pins for new LPC1768 pinmapping
2017-10-30 04:19:06 -07:00
Scott Lahteine
31e96935f7
Fix EXTRA_FAN_SPEED
...
Addressing #8158
2017-10-30 00:10:00 -05:00
Scott Lahteine
c94dce6b32
Merge pull request #8113 from thinkyhead/bf2_fixup_sd_reprint
...
[2.0.x] Cleanup after SD Print Again, whitespace, tabs
2017-10-29 23:57:51 -05:00
Scott Lahteine
ce1c9c0808
Tweak QUICK_HOME description
2017-10-29 23:48:13 -05:00
Scott Lahteine
12458cefc4
Remove 5s timer hack. Encoder pos is saved on print start!
2017-10-29 22:45:19 -05:00
Scott Lahteine
9a4cf11835
Remove return_to_status_ms hack, just use defer...
2017-10-29 22:45:18 -05:00
Scott Lahteine
8949c8c0a5
Move SD_REPRINT_LAST_SELECTED_FILE to ultralcd.cpp
2017-10-29 22:45:18 -05:00
Scott Lahteine
817175613a
Merge pull request #8157 from thinkyhead/bf2_anet_10_servo
...
[2.0.x] Define a default SERVO0_PIN for Anet 1.0
2017-10-29 19:55:00 -05:00
Scott Lahteine
723f2a77f6
Implement support for Dual X and Y endstops
2017-10-29 18:56:04 -05:00
Scott Lahteine
e04425281d
Add Dual Steppers / Endstops to configs
2017-10-29 18:56:04 -05:00
Scott Lahteine
edff2c917b
Cleanup for DIGIPOTS settings
2017-10-29 18:56:03 -05:00
Scott Lahteine
3e8754a38a
Add/correct time units on planner vars / M205 B
2017-10-29 18:47:21 -05:00
Scott Lahteine
b2a48f1a04
Provide a SERVO0_PIN for non-standard LCD
2017-10-29 18:36:16 -05:00
Scott Lahteine
b232f39341
AVR: Hidden option to use 8s watchdog
2017-10-29 18:36:16 -05:00
Scott Lahteine
9d4cfd2013
Merge pull request #8142 from thinkyhead/bf2_fix_m303
...
[2.0.x] Fix M303 thermal protection
2017-10-29 04:46:34 -05:00
Scott Lahteine
eae0aea1e0
Fix M303 thermal protection
2017-10-29 04:30:50 -05:00
Luc Van Daele
a1a4fc277e
(2.0.x) serious bug G33 ( #8136 )
...
* (2.0.x) serious bug G33
* Revert config changes
This reverts commit 74b5a98223b7b7fb970d05b8541f4a079c3cfe56.
2017-10-29 04:12:33 -05:00
Thomas Moore
325233b454
Fix automatic stepper assignment for X/Y/Z dual stepper drivers ( #8130 )
2017-10-28 19:45:07 -05:00
Thomas Moore
50b4f9cbf7
LPC1768 Pin Mapping and M43 cleanup ( #8119 )
...
* LPC1768 M43 cleanup
* Update pinmapping.h to #define pins
2017-10-28 19:44:54 -05:00
Scott Lahteine
6b1d1a818b
Revert default BABYSTEP_MULTIPLICATOR to 1
2017-10-27 19:45:44 -05:00
etagle
ba8dc678f5
Arduino Due XON/XOFF implementation
...
Alos includes emergency parser and configurable TX/RX buffers for Arduino Due.
2017-10-27 03:24:23 -05:00
etagle
8d9c3cc2b7
Add a module for Due SRAM-based Interrupt Vector Table
...
This is the ONLY way to be able to override ISRs stolen by the Arduino Runtime, such as Serial or USB device interrupts. This feature is needed so Arduino modules can be replaced and enhanced.
2017-10-27 03:24:23 -05:00
etagle
c9bbef6380
Cosmetic fix for HAL_AVR/MarlinSerial.cpp
...
Instead of using const char, it is better to use uint8_t
2017-10-27 03:24:23 -05:00
LVD-AC
dcfc2503c2
G33 Autotune calibration update #10
2017-10-27 02:11:24 -05:00
Scott Lahteine
b338cafc65
Merge pull request #8111 from thinkyhead/bf2_fwretract_fix_oct26
...
[2.0.x] Improved Firmware Retraction logic
2017-10-27 02:02:06 -05:00
Scott Lahteine
ada90f7335
Clean up trailing spaces
2017-10-26 23:33:43 -05:00
Scott Lahteine
7fad26549b
Concise SD_REPRINT_LAST_SELECTED_FILE description
2017-10-26 23:33:02 -05:00
Scott Lahteine
33f379fe88
Add some Polish language
...
Thanks @SCiunczyk
2017-10-26 22:49:04 -05:00
Scott Lahteine
daeff5a11a
Tweak neopixel self-test
2017-10-26 22:47:07 -05:00
Scott Lahteine
0ceec1f166
Fix leveling_active_at_z warning
2017-10-26 22:22:54 -05:00
studiodyne
eb02f8c719
Improve FWRETRACT logic, add common sense
2017-10-26 22:22:54 -05:00
Scott Lahteine
bd78ca0ee3
Add M290 Babystepping
2017-10-26 20:44:43 -05:00
Scott Lahteine
ce5f0ec85a
Bring STM32 example config up to date
2017-10-26 17:25:44 -05:00
Scott Lahteine
46e9eae159
Tweak to M100 config comment
2017-10-26 17:25:44 -05:00
Scott Lahteine
c45514f811
Merge pull request #8094 from thinkyhead/bf2_neopixel_led_parity
...
[2.0.x] Bring NEOPIXEL_LED into parity with 1.1.x
2017-10-26 17:24:38 -05:00
Bob-the-Kuhn
229a27a1c7
save FLASH by using reduced font for some languages
2017-10-26 16:08:17 -05:00
Roxy-3D
3f5f39576b
Reprint option for last SD Memory card file ( #8106 )
...
* Re-Print of same SD Memory Card file with single click
* Re-Print of same SD Memory Card file with single click
* This is the bugfix-v2.0.0 version of https://github.com/MarlinFirmware/Marlin/pull/8104
2017-10-26 15:50:18 -05:00
Thomas Moore
9e699811d2
Make LPC1768 pinmapping not specific to Re-ARM ( #8063 )
...
* Merging early because of build failures. See #8105
* Make LPC1768 pinmapping not specific to Re-ARM
* Add HAL_PIN_TYPE and LPC1768 pin features
* M43 Updates
* Move pin map into pinsDebug_LPC1768.h
* Incorporate comments and M226
* Fix persistent store compilation issues
* Update pin features
* Update MKS SBASE pins
* Use native LPC1768 pin numbers in M42, M43, and M226
2017-10-26 13:37:26 -05:00
Scott Lahteine
3ac581eac9
Neopixel changes for parity with 1.1.x
2017-10-25 18:40:04 -05:00
jeffyl
7b3098bbd5
Add AZSMZ Mini ( #8005 )
...
* Add AZSMZ Mini
* Remove tabs, adjust spacing
* Renumber boards to group by family
* Patch up spacing
* Tweak
2017-10-25 01:16:54 -05:00
Scott Lahteine
e00ed10c4c
GT2560 config MKS_MINI_12864 => SDSUPPORT
2017-10-25 01:12:48 -05:00
Scott Lahteine
10a5e4d80f
Merge pull request #8078 from thinkyhead/bf2_mks_mini_lcd
...
[2.0.x] Add MKS MINI 12864 support to GT2560
2017-10-25 01:10:03 -05:00
Scott Lahteine
ee9b8bf0f1
Add MKS MINI 12864 support to GT2560
2017-10-24 19:15:41 -05:00
Scott Lahteine
f65fc7ffab
Merge pull request #8044 from thinkyhead/bf2_mesh_consolidate
...
[2.0.x] Simplify mesh bounds config
2017-10-24 18:56:43 -05:00
Scott Lahteine
070cd34fe8
Merge pull request #8077 from thinkyhead/bf2_MKS_BASE_followup
...
Clean up HAL trailing spaces, MKS SBASE pins
2017-10-24 18:38:48 -05:00
Scott Lahteine
7f55d82fd1
Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h
2017-10-24 18:26:43 -05:00
Scott Lahteine
90a14b4f5b
Clean up HAL trailing spaces, MKS SBASE pins
2017-10-24 18:20:23 -05:00
Thomas Moore
51fafccc16
[2.0.x] Enable hardware serial ports on LPC1768 ( #8004 )
...
* Enable hardware serial ports on LPC1768
* Fix compilation errors with other HALs
* FIx order of includes in LPC1768 HAL main.cpp
* Add support for RX_BUFFER_SIZE and TX_BUFFER_SIZE options in Configuration_adv.h
2017-10-24 17:28:33 -05:00
Scott Lahteine
580b6e9089
Apply physical limits to mesh bounds
2017-10-24 16:54:07 -05:00
Scott Lahteine
4e2baeb3e1
Update indentation, file-wrapping for Marlin 2.0.x
2017-10-24 16:54:06 -05:00
Scott Lahteine
60af705e6d
Relocate SPI.h to the HAL folder
2017-10-24 16:54:06 -05:00
Scott Lahteine
46aae4c6e7
Merge pull request #8074 from thinkyhead/bf2_verbiage_like_8061
...
Fix some config verbiage
2017-10-24 15:25:12 -05:00
Scott Lahteine
3356d5a72d
Merge pull request #8072 from thinkyhead/bf2_fix_M600
...
[2.0.x] Fix position sync in M600 pause/resume
2017-10-24 14:55:46 -05:00
Scott Lahteine
5f87324536
Fix some config verbiage
2017-10-24 14:53:42 -05:00
Scott Lahteine
272f9f65dc
Fix some typos
2017-10-24 14:29:15 -05:00
studiodyne
8181220bfd
Fix position sync in M600 pause/resume
2017-10-24 14:29:15 -05:00
cdedwards
6296ab2173
Add GFX overlay to UBL mesh edit ( #8038 )
...
* Add GFX overlay to UBL mesh edit
Fixed misplaced HAS_TEMP_BED in dogm_bitmaps.h
rename _lcd_babystep_zoffset_overlay to _lcd_zoffset_overlay_gfx and move it out of BABYSTEP_ZPROBE_OFFSET to we can use it for over things. Add this function into UBL mesh edit screen.
update all Configuration.h to add ENABLE_MESH_EDIT_GFX_OVERLAY
* Add Sanity to UBL insanity
Need to check for DOGLCD otherwise error out.
2017-10-24 14:14:03 -05:00
Roxy-3D
72156a2029
change to better (more clear) names ( #8050 )
...
set_destination_to_current() changed to set_destination_from_current()
set_current_to_destination() changed to set_current_from_destination()
2017-10-21 11:42:26 -05:00
Scott Lahteine
0cb423b5b3
Apply consistency for other configs
2017-10-21 00:41:51 -05:00
Scott Lahteine
8c78f8f790
Add Makeboard MINI for Micromake C1
2017-10-21 00:41:51 -05:00
Scott Lahteine
1fbb307aaf
Merge pull request #8021 from thinkyhead/bf2_scroll_longnames
...
[2.0.x] Add SCROLL_LONG_FILENAMES to reveal longer filenames
2017-10-20 21:33:54 -05:00
Scott Lahteine
3d2b2eb1ca
Prevent SDCARD_SORT_ALPHA from exploding
2017-10-20 19:13:21 -05:00
Scott Lahteine
783ddf9691
Add SCROLL_LONG_FILENAMES option
2017-10-20 19:13:21 -05:00
Roxy-3D
5439358281
Basic UBL operations working on 32-bit platforms ( #8024 )
...
* 32-bit work for UBL
* Update FT i3-2020 reference file
2017-10-19 10:44:45 -05:00
Scott Lahteine
9e5cbf0198
BQ should set this in its config, and does
2017-10-18 22:56:03 -05:00
Scott Lahteine
348e5e3109
Simplify Cartesian probing boundaries
...
Followup to #8012
2017-10-18 17:14:32 -05:00
Luc Van Daele
3986a84f77
boolval revisited ( #8016 )
2017-10-18 14:03:17 -05:00
Roxy-3D
572cf0ec95
UBL able to generate mesh and save and load it on 32-bit platforms ( #8015 )
...
* Get UBL Mesh Generation, Mesh Save & Mesh Load working with 32-Bit platforms
* clean up read_data() and write_data() for non-LPC1768 HAL's
* Get read_data() and write_data() return codes consistent
All HAL's read_data() and write_data() return false if they succeed.
* Get read_data() and write_data() return codes to be consistent
Make read_data() and write_data() return true if an error happens.
* Say UBL is now checked out on machine types in default Configuration.h file.
2017-10-18 14:00:29 -05:00
Thomas Moore
67cc29cd3c
Update UBL mesh boundaries to accomidate beds centered at 0, 0 ( #8012 )
2017-10-18 10:03:30 -05:00
Roxy-3D
6cb26c98c8
Fix Baby Stepping on 32-Bit platforms ( #8001 )
...
Also, Max7219 debug code was used for this effort. It has been
improved and hardened.
2017-10-16 16:29:37 -05:00
Scott Lahteine
3b7b0492f8
Merge pull request #7993 from jeffyl/bugfix-2.0.x
...
[2.0.x] Proper support for AZSMZ 12864 LCD on SmartRAMPS
2017-10-16 14:12:29 -05:00
Jeffrey Li
26531f2715
Add lcd to all sample configs
2017-10-16 03:24:25 -07:00
Scott Lahteine
ce48403a0b
Add EXTRA_FAN_SPEED feature
...
Based on #7883 by @studiodyne
2017-10-16 02:34:13 -05:00
Jeffrey Li
eeb4611606
Add proper support for the AZSMZ 12864 LCD on a SMART RAMPS
2017-10-16 00:33:07 -07:00
Scott Lahteine
c46189e429
Fix UBL+Delta segmented feedrate
...
Based on #7948
2017-10-15 16:31:09 -05:00
Scott Lahteine
5c4f3e0107
Add LCD_SET_PROGRESS_MANUALLY
2017-10-15 03:05:29 -05:00
Scott Lahteine
014a83fe09
Merge pull request #7984 from thinkyhead/bf2_micromake_c1
...
[2.0.x] Micromake C1 Configurations, Unaccented French
2017-10-14 21:19:32 -05:00
Scott Lahteine
bc7df0188e
Add Micromake C1 configurations
2017-10-14 20:28:12 -05:00
Scott Lahteine
34a261416f
Add unaccented French language
2017-10-14 20:28:12 -05:00
Scott Lahteine
e587f0893c
Define AVR_ATmega2560_FAMILY_PLUS_70 in Conditionals
2017-10-14 19:05:32 -05:00
Scott Lahteine
fd128b3c93
Fix some AVR HAL code style
2017-10-14 19:05:10 -05:00
Scott Lahteine
799360c576
Enhance Teensy/RAMPS pins files
2017-10-14 18:44:20 -05:00
Scott Lahteine
d3e5a22a5d
Add MIN_SOFTWARE_ENDSTOP_[XYZ] to example configs
2017-10-14 18:44:20 -05:00
Jeff Eberl
b206f70693
Split the software endstop capability by axis.
2017-10-14 18:44:20 -05:00
Scott Lahteine
ec69e97bda
Merge pull request #7974 from jeffyl/bugfix-2.0.x
...
Fix include path for VIKI
2017-10-14 17:38:42 -05:00
Morten
91e28edda6
[2.0.x] Add new board: MKS Sbase ( #7945 )
...
* Add files via upload
* Add files via upload
* Add files via upload
* Checked LCD / edited / revised pins_MKS_BASE.h
As requested :)
* Delete Configuration_adv.h
* Delete Configuration.h
* Deleted /Marlin/Marlin/src/config/examples/MksSbase/*.* and moved them to /Marlin/Marlin/src/config/examples/Mks/Sbase/*.*
* Add files via upload
2017-10-14 09:44:18 -05:00
Jeffrey Li
3c8a3a02ba
Fix include path for VIKI
2017-10-14 04:06:17 -07:00
Scott Lahteine
4586acad8c
Merge pull request #7959 from alexxy/bugfix-2.0.x
...
Python isnt always python2
2017-10-14 05:02:07 -05:00
Scott Lahteine
497f86453e
Merge pull request #7964 from gallynero/patch-2
...
fix 'axis_unhomed_error' not defined error
2017-10-14 05:00:58 -05:00
Scott Lahteine
c0dddd4233
Tweaks to tool_change, GcodeSuite::T()
2017-10-14 02:53:19 -05:00
Scott Lahteine
ca66574062
ADC sensor fix inspired by 'Evgen2' on Twitter
2017-10-14 02:28:13 -05:00
Scott Lahteine
1344ca4b2f
UBL no longer needs ubl_state
2017-10-14 02:18:32 -05:00
Scott Lahteine
8dd08425fd
Improve LCD leveling edits
2017-10-14 02:18:31 -05:00
Scott Lahteine
3e3911fb81
Use planner.leveling_active for all leveling systems
2017-10-14 02:18:31 -05:00
Scott Lahteine
32c607ffe2
Ensure fade factor is recalculated if fade height changes
2017-10-14 02:18:31 -05:00
Scott Lahteine
ca1e47375c
Move fade_scaling_factor_for_z to Planner
2017-10-14 02:18:31 -05:00
Scott Lahteine
9a930ebec2
Make leveling_is_active a macro
2017-10-14 02:18:31 -05:00
Scott Lahteine
58abc66c1d
Tweak bed leveling conditionals
2017-10-14 02:18:31 -05:00
Scott Lahteine
1adb5a6a48
Remove obsolete UBL z_offset
2017-10-13 08:22:46 -05:00
gallynero
3619a4cbea
fix 'axis_unhomed_error' not defined error
...
Fix 'axis_unhomed_error' not defined error when pause with unhomed status
2017-10-13 09:08:02 +02:00
Alexey Shvetsov
12d212d1b4
Python isnt always python2
...
So now this script is compatible with both python versions 2 and 3
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
2017-10-13 01:39:06 +03:00
Scott Lahteine
cc01a36363
Merge pull request #7947 from thinkyhead/bf2_more_READMEs
...
[2.0.x] Add a README.h file for Arduino IDE users
2017-10-12 06:56:41 -05:00
Scott Lahteine
4764710b11
Add a README.h file for Arduino IDE users
2017-10-11 18:10:15 -05:00
Bob-the-Kuhn
4e3ee845b9
config_adv ( #7941 )
...
get rid of twi.h
move to board files
2017-10-11 15:42:24 -05:00
Roxy-3D
0e260c6c1d
Get FolgerTech i3-2020 working again with 32-bit platforms ( #7944 )
...
Setup FolgerTech i3-2020 Configuration files as a reference platform for
32-Bit work.
Also fix MAX7219 debug lights on 32-bit platforms.
2017-10-11 15:23:04 -05:00
Bob-the-Kuhn
26bfae58d4
MPC4451 I2C support
2017-10-11 00:30:41 -05:00
Scott Lahteine
1f5c432e29
Merge pull request #7920 from thinkyhead/bf2_neopixel_full
...
[2.0.x] Move FILAMENT_RUNOUT_SENSOR to a feature
2017-10-10 03:05:00 -05:00
Scott Lahteine
732e87e83c
Merge pull request #7892 from GMagician/Serial-double-echo-fix
...
[2.0.x] Serial double echo fix
2017-10-10 02:42:16 -05:00
Scott Lahteine
f8e8fcb978
Move FILAMENT_RUNOUT_SENSOR to a feature
2017-10-10 02:37:42 -05:00
Slawomir Ciunczyk
a11e6a1022
Different NEOPIXEL types
...
Same as #7728 but for 2.0.x,
Lot of cleanup and remove references in whole code to other "LED files" than leds.h. Now will be much easier to add next drivers/libraries. e.g. FastLED. But bad news, currently FastLED is suporting only RGB devices (no RGBW)
2017-10-10 02:17:36 -05:00
Scott Lahteine
b30b55307c
Merge pull request #7909 from thinkyhead/bf2_goodbye_legacy_advance
...
[2.0.x] Remove legacy ADVANCE feature
2017-10-10 00:31:18 -05:00
Scott Lahteine
1d04197f2f
Merge pull request #7916 from thinkyhead/bf2_probeless_ubl
...
[2.0.x] Allow UBL G29 and G26 to build without a probe
2017-10-10 00:30:27 -05:00
Thomas Moore
9b0ee53b12
Use segmented moves when moving axis from LCD
2017-10-09 23:25:43 -05:00
Scott Lahteine
442669d23c
Allow UBL to build without a probe
2017-10-09 18:57:41 -05:00
Scott Lahteine
20ebe218c8
Tweaks to VIKI lcd support
2017-10-09 17:01:07 -05:00
Scott Lahteine
09fa34a9e1
Modernize configs
2017-10-09 16:18:10 -05:00
Scott Lahteine
560d366b80
Move VIKI SCK/MOSI pins fix to Conditionals_POST.h
2017-10-09 16:13:49 -05:00
Scott Lahteine
e9bcb9d048
Add 4 new LCD displays
2017-10-09 15:58:02 -05:00
Scott Lahteine
03f4891fb9
Remove legacy ADVANCE feature
2017-10-09 04:25:18 -05:00
GMagician
546f02c6f4
[2.0.x] Addressing #7896
...
Compiler error, added char c variable
2017-10-08 23:16:35 +02:00
GMagician
eb96d37da0
Serial double echo fix
...
Fix double character sent when TX buffer size is 0 on mega2560
2017-10-07 22:20:00 +02:00
Scott Lahteine
deeea98d22
LCD filename already concatenated
2017-10-07 15:16:05 -05:00
Scott Lahteine
a058638d11
Merge pull request #7875 from thinkyhead/bf2_fill_eeprom_dat_ff
...
[2.0.x] Update LPC persistent store to initialize eeprom.dat with FF
2017-10-07 15:13:21 -05:00
Scott Lahteine
ae1a18d0a1
LCD filename already concatentated
2017-10-07 15:10:15 -05:00
Scott Lahteine
12aa1b999a
Fix display issue with SD_SORT_ALPHA cached names
2017-10-07 15:08:08 -05:00
Dave Johnson
9d0e4ea3d5
[2.0.x] Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled ( #7879 )
...
* Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled
If HOME_AFTER_DEACTIVATE, there is no need to warn on LCD since printer will home prior to starting print. Saves 60 bytes PROGMEM on AVR with U8g panel.
* Reduce lines used
* Reduce lines used
2017-10-07 15:02:55 -05:00
Scott Lahteine
8315a8a716
Apply fixes for DUE
...
Alternative to #7882 . If F_CPU is greater than 1000 it can be evenly divided by 8. Over 10000, 16; over 100000, 32; over 1 million, 64; etc.
2017-10-07 14:31:18 -05:00
Scott Lahteine
4b36a542e0
Merge pull request #7876 from thinkyhead/bf2_hotend_messages
...
[2.0.x] Addressing #7612
2017-10-07 13:37:43 -05:00
Unknown
12730c1303
[2.0.0] Resolve USE_CONTROLLER_FAN compile errors
...
Add to controllerfan.cpp:
#include "../module/stepper_indirection.h"
#include "../module/temperature.h"
2017-10-07 05:26:36 -07:00
Scott Lahteine
7fb3343bda
[2.0.x] Addressing #7612
...
Change "extruder" to HOTEND in sanity error messages
2017-10-07 02:27:26 -05:00
victorpv
8998f31ee1
Update LPC persistent store to initialize eeprom.dat with FF
...
This change initialize any data in eeprom.dat beyond the current file size to FF.
That way if eeprom.dat is deleted and created again, it doesn't take the old values or random ones, but rather starts with FF in all positions as a real brand new or erased eeprom.dat
Currently if you delete eeprom.dat and restart the board, the new file is created in the same sector with the same content, since FAT does not actually delete the data, just marks the sector as free. I tested by deleting the file, and then rebooting the board, and checking the file content.
The change can be tested in the same way, deleting, rebooting the board, and then the new content should be all FF.
If an eeprom file already exist with data on it, but smaller than E2END, it will be padded with FF on first access, so it will not have random or old content appended.
2017-10-07 02:18:42 -05:00
Scott Lahteine
2aa22c5a5e
Merge pull request #7874 from thinkyhead/bf2_anet_encoder_pulses
...
[2.0.x] Fixing ANET encoder pulses
2017-10-07 01:21:23 -05:00
Scott Lahteine
f99d1dedae
Fixing #7833
...
Derived from #7873
2017-10-07 00:10:05 -05:00
Scott Lahteine
de84f57a9c
Patch SD file draw bug
2017-10-06 23:57:11 -05:00
Scott Lahteine
ef90b49fff
Remove extra NEWPANEL settings in Conditionals_LCD.h
2017-10-06 23:56:58 -05:00
Scott Lahteine
67a7dd9792
Merge pull request #7866 from thinkyhead/bf2_finally_G33_is_done
...
[2.0.x] Apply G33 updates
2017-10-06 16:03:26 -05:00
Scott Lahteine
b220bc7521
Apply G33 updates
...
Adapted from #7865
2017-10-06 15:47:51 -05:00
Scott Lahteine
9fe7f53216
Misc general spacing cleanup
2017-10-06 15:14:01 -05:00
Scott Lahteine
c0382cd8cd
Add UTF-8 mapper for Slovak language
...
Based on #7862 , #7846 by @rmoravcik
2017-10-06 15:14:01 -05:00
Scott Lahteine
c81843a414
Set TEMP_SENSOR_0 to 1 in CR-10 example config
...
As pointed out in #7692 by @totalitarian
2017-10-06 14:30:53 -05:00
android444
72693a7e87
[2.0.x] Fixed RAMPS FD V1 pins.h file ( #7852 )
...
* test only
test
* Fixed RAMPS FD V1 pins.h file
* Fix typo
2017-10-06 13:27:15 -05:00
Chris Pepper
aa51a02b8f
LPC1768: fix serial buffer underrun ( #7854 )
...
When the buffer is empty index_write == index_read, but they needed constrained by buffer_mask
2017-10-05 17:19:43 -05:00
Chris Pepper
46b2773e13
General fixes for LPC1768 ( #7834 )
...
* fixed some include paths
* LPC1768: Fix Serial API
Add missing serial methods used if TX_BUFFER_SIZE is set
Change return value of HalSerial:read to match Arduino API
* LPC1768: add filters to ADC
This is to try and compensate for hardware issue and oversensitivity to noise
* LPC1768: remove the polling section of delayMicroseconds
* LPC1768: lock usb mass storage device while device accesses it.
Currently only applicable to persistent store,
The device always has priority and will unmount the sd card from the host, Windows then tries to automount again so it can look like the explorer window freezes. Linux Mint, by default, just closes the Nemo window.
* Add timeout to make sure if Serial never connects that Marlin still boots
* Remove unneeded ifdef CPU_32_BIT
In general the need for ifdef CPU_32_BIT blocks means that something is missing from the HAL API or a Platform, in this case HAL_TICKS_PER_US was missing from the AVR Platform
* LPC1768: relocate RE-ARM debug_extra_script.py
2017-10-04 15:40:54 -05:00
Scott Lahteine
7258218f89
Fix xon_xoff_state initialization
2017-10-04 12:11:56 -05:00
Scott Lahteine
bf596fb039
Merge pull request #7818 from thinkyhead/bf2_xon_xoff
...
[2.0.x] Add XON/XOFF serial handshaking
2017-10-02 23:52:30 -05:00
