9311 commits

Author	SHA1	Message	Date
GMagician	405a2132f3	#7529 compile fix ... I made an error in previous fix	2017-08-17 22:04:28 +02:00
GMagician	869d7f3703	#7504 missing part ... #7504 integration has missed this part. When more than 1 servo is used with bltouch it's impossible to predefine default servo delay for it. In my original fix I completely removed this part but maybe this is a better compromise	2017-08-17 21:43:47 +02:00
Scott Lahteine	101ba70517	Merge pull request #7505 from thinkyhead/bf1_anet_1_pio ... Add Anet 1.0 to Platformio.ini	2017-08-17 00:33:20 -05:00
Vben	4817b39d98	Added new feature for AutoParking Extruder (APE)	2017-08-16 17:33:11 -05:00
Scott Lahteine	6772e33ef6	Use [XY]_CENTER for error correction ... Followup to #7512	2017-08-16 16:13:09 -05:00
Scott Lahteine	385f1bb9e5	Merge pull request #7504 from thinkyhead/bf1_servo_delays ... Individual servo delays	2017-08-16 16:05:22 -05:00
Scott Lahteine	2a31c9f2ce	Merge pull request #7515 from cdedwards/bugfix-1.1.x ... Fix for G26 spam output	2017-08-16 16:01:10 -05:00
MTrab	5fa61c0ad3	Add Anet 1.0 to Platformio.ini ... Added env:anet10 to platformio.ini for easy compile and upload to this board	2017-08-16 15:59:20 -05:00
Scott Lahteine	b3f59ec945	Merge pull request #7519 from thinkyhead/bf1_cleanups_aug_16 ... Add "Level Corners" menu item	2017-08-16 15:58:15 -05:00
Tannoo	b33739d493	UBL_Language_Update (#7520) ... * UBL_Language_Update Translatable strings * Use slightly better wording... * Use slightly better wording...	2017-08-16 09:49:04 -05:00
Scott Lahteine	a1878cd1c0	Add "Level Corners" menu option	2017-08-16 02:54:33 -05:00
Scott Lahteine	0a18fb735e	Use "PSU" label to fit on screen	2017-08-16 02:51:00 -05:00
Scott Lahteine	30887feae3	Tweak some formatting in ABL G29	2017-08-16 02:51:00 -05:00
Thomas Moore	257b693ab0	Advanced pause fixes (#7518) ... * Disallow filament change while paused * Use kinematic movemements in pause_print and resume_print	2017-08-15 22:57:13 -05:00
Tannoo	ab2ac1af71	UBL_LCD_storage_corrections (#7517) ... Correcting the storage selection. Also EEPROM error handling on the LCD.	2017-08-15 21:01:11 -05:00
cdedwards	f1843211e6	Fix for G26 spam output ... while heating, G26 will continuously spam the heater states instead of printing it out every 5000ms.	2017-08-15 17:04:53 -06:00
Roxy-3D	be5ca34215	Allow G29 to work correctly even if nozzle is off the mesh. (#7512) ... * work around previous regressions...	2017-08-15 17:04:52 -05:00
Scott Lahteine	06541ec885	Merge pull request #7448 from thinkyhead/bf1_delta_fixes ... Prevent damage if DELTA_HEIGHT is set badly	2017-08-15 16:35:09 -05:00
GMagician	e9c72978c7	Implement SERVO_DELAY as array ... This modify give SERVO_DELAY x servo basis	2017-08-15 00:28:47 -05:00
Scott Lahteine	96ae53cf41	Use MOVE_SERVO macro where possible	2017-08-15 00:28:39 -05:00
Scott Lahteine	3be9c19f12	Hold on move axis screens	2017-08-14 22:51:47 -05:00
Scott Lahteine	8fd58cd6dc	Patch goto labels for consistency	2017-08-14 22:51:47 -05:00
Scott Lahteine	75e6f72c89	Fix hexadecimal number formatting	2017-08-14 22:50:44 -05:00
Scott Lahteine	ac76101ec3	Eliminate goto in gcode_M48	2017-08-11 17:00:40 -05:00
Scott Lahteine	75e6ead5fd	Eliminate goto in gcode_G33	2017-08-11 17:00:40 -05:00
Scott Lahteine	6bd63d27b5	Updates to G29 for probe error handling	2017-08-11 17:00:40 -05:00
Thomas Moore	f54e0fc90f	Prevent damage if DELTA_HEIGHT is incorrect	2017-08-11 16:09:14 -05:00
Scott Lahteine	0938c62b48	Neater position_is_reachable call	2017-08-11 15:55:32 -05:00
Scott Lahteine	9d95b1b4df	Tweak Conditionals_post.h	2017-08-11 15:55:32 -05:00
Scott Lahteine	35d5a7bdff	Tweak CR-10 config/pins	2017-08-11 15:55:31 -05:00
Scott Lahteine	419c8969a7	Merge pull request #7479 from thinkyhead/bf1_fix_italian ... Fix Italian string length	2017-08-10 18:42:35 -05:00
Frederik Kemner	25a11cd485	Use bed size and inset instead of travel limits to define mesh area\n\nAs proposed in #7435 (#7480)	2017-08-10 16:53:04 -05:00
Scott Lahteine	7f3406d47b	Fix Italian string length ... Addressing #7264	2017-08-10 15:41:35 -05:00
Jozsef Kiraly	97c21e9007	Support for Geeetech GT2560 Rev.A/Rev.A+	2017-08-06 00:42:54 -05:00
Scott Lahteine	b2822a59f9	Add a sanity check for valid bed size	2017-08-05 03:49:04 -05:00
Scott Lahteine	a7e5c1bf19	Use float to init TMC2133 steps-per-mm	2017-08-05 03:48:52 -05:00
Scott Lahteine	dd66d21749	Extend DEACTIVATE_SERVOS_AFTER_MOVE sanity-check ... As proposed in #7429	2017-08-05 03:48:52 -05:00
richarddeweerd	b370906031	Example config for Geeetech I3 Pro X with GT2560 controller	2017-08-05 03:48:52 -05:00
Scott Lahteine	804818b4d9	Bring configs up to date	2017-08-05 03:48:52 -05:00
Scott Lahteine	dd841a3675	Merge pull request #7410 from benlye/user-script-feedback ... Make audible user script feedback optional	2017-08-05 02:59:56 -05:00
Florian Heilmann	0fd2923a9f	Fix compilation with ADVANCED_PAUSE_FEATURE without SDSUPPORT (#7412) ... * Fix compilation of ADVANCED_PAUSE_FEATURE without SDSUPPORT * Fix Identation * Make use of IS_SD_PRINTING macro as per @MagoKimbra	2017-08-05 02:58:38 -05:00
benlye	24af9e1bf4	Make audible user script feedback optional ... Add a parameter to enable/disable audible user script feedback	2017-08-04 17:24:10 +01:00
Florian Heilmann	6827a162bb	Update language_de.h ... Add MSG_BLTOUCH MSG_DELTA_SETTINGS MSG_UBL_MESH_EDIT MSG_UBL_OUTPUT_MAP_BACKUP MSG_UBL_STEP_BY_STEP_MENU MSG_Z_FADE_HEIGHT	2017-08-04 09:35:21 +02:00
Scott Lahteine	3497153cf1	Followup cleanup patch ... Fix regression in #7428	2017-08-03 14:55:22 -05:00
Scott Lahteine	16f8c4865a	Merge pull request #7409 from FHeilmann/bf_update_ru_translation ... Update Russian Translation	2017-08-03 14:54:40 -05:00
Scott Lahteine	622048ffb0	Clean up whitespace, trailing space, bad tab conversion, etc.	2017-08-03 11:20:03 -05:00
Roxy-3D	2cbdc0ebb6	Fix large Z corrections when nozzle moves off of UBL mesh (#7415)	2017-08-02 16:51:04 -05:00
Florian Heilmann	650e5274c4	Update Russian Translation	2017-08-02 21:19:15 +02:00
Scott Lahteine	ce65c13a97	Merge pull request #7398 from fiveangle/bf_lcd_bed_level_requirements ... Clarify LCD_BED_LEVELING requirements	2017-08-01 17:46:07 -05:00
Dave Johnson	936dfb965c	Clarify LCD_BED_LEVELING requirements ... LCD_BED_LEVELING requires PROBE_MANUALLY with auto bed leveling enabled. See #7396	2017-08-01 14:13:54 -07:00
Kai	ffe3013bb5	Fix for #7395 ... Filament change causes freeze during paused print. This PR disables Filament change in the prepare menu when a print from SD Card is paused. See #7395	2017-08-01 21:45:41 +02:00
Øystein Krog	e948f77cf9	Fix DUAL_X_CARRIAGE not moving at all ... Axis would only move when homing. Bug introduced in 91841d75c9. Fixes #6956, fixes #7050 and fixes #7291	2017-07-31 18:44:26 +02:00
Scott Lahteine	08b0456d91	Merge pull request #7379 from thinkyhead/bf_manual_bed_level_floor ... Manual Bed Leveling: Goto previous Z height at each probe point	2017-07-30 05:41:12 -05:00
teemuatlut	936d00dda8	Implement probing delay for piezo sensors	2017-07-29 21:46:40 -05:00
Scott Lahteine	29eef360d0	Merge pull request #7308 from thinkyhead/bf_cleanup_config_adv ... Fixes for FWRETRACT	2017-07-29 21:20:19 -05:00
Wilfried Chauveau	894608f8a3	Manual Bed Leveling: Goto previous Z height at each probe point	2017-07-29 21:15:37 -05:00
Scott Lahteine	ff06e1a030	Merge pull request #7372 from tcm0116/delta_calib_menu ... Move Delta Calibration menu to the Prepare menu	2017-07-29 21:05:03 -05:00
Thomas Moore	15e009b6ca	Move Delta Calibration menu to the Prepare menu	2017-07-28 08:33:18 -05:00
Scott Lahteine	bfd396c13a	Patch to fix some compiler warnings	2017-07-28 02:27:16 -05:00
Scott Lahteine	48c5f3dddf	Tweak kill action #ifdef	2017-07-27 23:42:01 -05:00
Scott Lahteine	be7a9a07c5	Don't reset grid with G29 Q + PROBE_MANUALLY	2017-07-27 22:47:43 -05:00
Scott Lahteine	dfe670247d	Merge pull request #7363 from marcio-ao/bugfix-1.1.x ... Makefile fixes and U8G support.	2017-07-27 21:31:56 -05:00
Marcio Teixeira	af83c512b8	Added support for U8G.	2017-07-27 07:49:25 -06:00
Scott Lahteine	4eff18854b	Rename options with swap_ prefix	2017-07-27 04:14:29 -05:00
Scott Lahteine	14482d2f2a	Strip auto-retract for impossible M(IN|AX)_AUTORETRACT combo	2017-07-27 04:14:29 -05:00
Scott Lahteine	9fc72422e4	Don't let the flow multiplier affect retract/recover length	2017-07-27 04:14:29 -05:00
Scott Lahteine	fee696db5d	Improve retract() for G10/G11/autoretract	2017-07-27 04:14:29 -05:00
Scott Lahteine	423b0f3a1e	Replace MIN_RETRACT with MIN_AUTORETRACT, MAX_AUTORETRACT	2017-07-27 04:14:29 -05:00
Scott Lahteine	51864fd365	Add bed size as a configuration option	2017-07-26 23:04:54 -05:00
Scott Lahteine	dc7c95e07b	Remove @ section fwretract	2017-07-26 22:46:16 -05:00
Dave Johnson	4718c09c48	Remove extraneous USBCON defines for AT90USB boards ... USBCON is definied by serial.h pullikng in MarlinConfig.h which in turn pulls in Arduino.h. Defining in later includes has shown to cause compile issues so removing all extraneous calls for and potentially easier future linker troubleshooting. more USBCON unification	2017-07-23 16:41:48 -07:00
C. Scott Ananian	890e7a16a9	Add support for Printrbot Neopixel RGBW strip. ... Connected as described at http://printrbot.com/shop/led-strip/ Based on patch by Kelly Anderson <kelly@xilka.com> at http://www.xilka.com/printrbot/marlin/1.1.4/20170707/	2017-07-22 16:07:55 -05:00
Scott Lahteine	a059e95463	Bring Infitary i3 config up to date	2017-07-21 20:49:19 -05:00
Scott Lahteine	d6d6043548	Merge pull request #7338 from thinkyhead/bf_mks_ps_on_pin ... MKS 1.3+: Add pin mapping for PS_ON	2017-07-21 20:00:26 -05:00
Alexey Shvetsov	851f9f5399	Update Russian translation - Part 1 ... Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>	2017-07-21 19:32:37 -05:00
Scott Lahteine	b7a16e4468	Merge pull request #7315 from fixoid/patch-1 ... Fixing SWITCHING_EXTRUDER feature to work with HOTENDS > 1	2017-07-21 19:10:54 -05:00
Alexey Shvetsov	f38b8c5bf8	MKS 1.3+: Add pin mapping for PS_ON ... This allows the use of D4 as PS_ON since MKS Gen doesn't have a PS_ON pin. However this effectively allows only 3 servos (instead of 4). Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>	2017-07-21 18:50:05 -05:00
Scott Lahteine	8a3bc6be4d	Improve FWRETRACT config options and commentary ... Add more details as requested in #7198	2017-07-20 22:57:50 -05:00
Scott Lahteine	b0173ccdb9	Drop extra initializers for vars initialized by EEPROM code	2017-07-20 22:57:49 -05:00
Scott Lahteine	7afafb05b8	Split G10/G11 into separate functions	2017-07-20 02:24:13 -05:00
Scott Lahteine	c45798694f	Add some more requirements to the G-code list	2017-07-20 02:24:13 -05:00
Scott Lahteine	72de280c1e	BARICUDA valve pressure consistently uint8_t	2017-07-20 02:21:40 -05:00
Scott Lahteine	4d98e3f0a7	General cleanup	2017-07-20 02:21:40 -05:00
fixoid	e530c67349	Fixing SWITCHING_EXTRUDER feature	2017-07-19 21:15:26 +03:00
Tannoo	2ad3ca5d8a	Bugfix (#7310)	2017-07-18 22:55:14 -05:00
Roxy-3D	37a6833d7e	Allow the sampled point to be added into the Least Squares Best Fit (#7289) ... Without this... The LSF won't work because none of the sampled points in this code block get added.	2017-07-13 16:33:02 -05:00
C. Scott Ananian	a519b093b9	Fix build by replacing qr_solve by least_squares_fit. (#7285) ... This was broken by 9af67e2446.	2017-07-13 12:02:15 -05:00
Scott Lahteine	0873c667fa	Apply coding standards to recent merges	2017-07-13 00:46:16 -05:00
Scott Lahteine	8c2907d10f	Fix ABL broken by recent change	2017-07-12 22:56:18 -05:00
Roxy-3D	9af67e2446	Save 7714 bytes of program memory when doing AUTO_BED_LEVELING_LINEAR (#7276) ... We can save more and a pile of RAM by eleminating the eqnBVector and EqnAMatrix arrays next.	2017-07-10 19:05:11 -05:00
Scott Lahteine	76e90b93b7	Volatile keyword not needed for parser.seen	2017-07-10 15:38:54 -05:00
Jamie Bainbridge	00e4ced58e	Stay in User Menu after command. Add feedback. ... When a user executes a User Menu command, the LCD returns to the main menu. If the user has multiple menu items they want to run, such as one menu item per bed leveling corner, then it's better to stay in the User Menu rather than return to the main menu. This PR modifies Marlin to stay in the User Menu after a command.	2017-07-10 13:47:12 -05:00
Scott Lahteine	1066b17457	Merge pull request #7260 from thinkyhead/bf_G33_update_27 ... Updates to G33 and its LCD code	2017-07-10 13:39:36 -05:00
Tannoo	e927941c06	Bugfix (#7265) ... Fix compile error when UBL is enabled but there is no LCD Panel.	2017-07-08 09:44:50 -05:00
Scott Lahteine	68aea9c01d	Merge pull request #7261 from thinkyhead/bf_configs_by_vendor ... Arrange more example configs by vendor	2017-07-07 15:46:22 -05:00
Tannoo	aaacef9441	Corrections (#7231) ... 20x4 map integration. Also some minor changes to the UBL Menu layout. Both 20x4 LCD's and Graphical LCD panels should have similar functionality now.	2017-07-07 11:05:08 -05:00
LVD-AC	4bc79ec877	Updates for G33-LCD interface	2017-07-07 05:00:59 -05:00
Scott Lahteine	186580b55f	Arrange example configurations by vendor	2017-07-07 04:48:23 -05:00
Scott Lahteine	6be369f3ea	Add some config names to AUTHOR	2017-07-07 04:46:33 -05:00
Scott Lahteine	7fc31a7940	Merge pull request #7258 from thinkyhead/bf_cleanups_jbrazio ... Add support for BQ heated bed kit with Hephestos 2	2017-07-07 04:11:07 -05:00
Scott Lahteine	11e376e920	Merge pull request #7256 from thinkyhead/bf_cleanup_july_6 ... Assign -1 to LCD_PINS_D4-7 if not defined	2017-07-07 03:22:47 -05:00
João Brázio	2065591daf	Add support for BQ heated bed kit with Hephestos 2	2017-07-07 03:10:38 -05:00
essgcee	61be28133d	Support for Creality CR-10 ... Creality board is a Melzi / Sanguinololu variant, but using different pins for LCD control (and maybe other minor variations)	2017-07-06 23:08:10 -05:00
Scott Lahteine	9248a90a4c	Assign -1 to LCD_PINS_D4-7 if not defined	2017-07-06 22:47:51 -05:00
Scott Lahteine	5ef1e5ef60	Tweaks for M43	2017-07-06 21:47:50 -05:00
Scott Lahteine	c7732db99d	Fix: Use of digitalRead, digitalWrite breaks on AT90USB	2017-07-06 21:25:56 -05:00
Scott Lahteine	f713f25fa5	Clean up excess whitespace	2017-07-06 21:24:30 -05:00
Scott Lahteine	fc9ce65095	Add BUSY_WHILE_HEATING for hosts that need it	2017-07-06 16:28:57 -05:00
Scott Lahteine	c6d430670a	Clear SHOW_BOOTSCREEN with no LCD	2017-07-06 14:21:27 -05:00
Scott Lahteine	11c589c3ec	Fix compile issue with G38 ... Fixes #7250	2017-07-06 14:21:27 -05:00
Scott Lahteine	678914be25	Patch M23 to work around Simplify3D bug ... Addressing #7227	2017-07-06 14:00:58 -05:00
LVD-AC	3efe4aeef8	Add PROBE_MANUALLY support to G33	2017-07-04 18:06:54 -05:00
Scott Lahteine	cca1cca3a5	Merge pull request #7237 from thinkyhead/bf_cz_mapper ... UTF-8 mapper for Czech	2017-07-04 16:45:13 -05:00
Scott Lahteine	a2babb532d	Merge pull request #7217 from benlye/add-kill-action ... Add configurable action command to send when printer is killed	2017-07-04 16:44:08 -05:00
Petr Zahradník	8c34233452	UTF-8 mapper for Czech	2017-07-04 15:51:23 -05:00
Dave Johnson	20f6676d63	DISABLE_[XYZ] compatibility check ... DISABLE_[XYZ] is incompatible with HOME_AFTER_DEACTIVATE and Z_SAFE_HOMING	2017-07-03 17:23:53 -07:00
Ben Lye	c28749a567	Add kill action ... Sends pre-defined string as action command when printer is kill.	2017-07-03 23:45:19 +01:00
Scott Lahteine	df87278fce	Add "CAP:PRINT_JOB:1" (M75 / M76 / M77) to M115 output	2017-07-03 15:59:06 -05:00
Scott Lahteine	4be8d7720e	Fix spelling of "Chinese"	2017-07-03 15:24:49 -05:00
LVD-AC	567941e341	Fix for issues #6997 and #7152 ... Probing with the effector in the printing area, but an eccentric probe (e.g. allen key) outside it but still touching the bed gives meaninfull information for calibration. Since calibration is most accurate when probing as close to the towers as possible the testing was way to restrictive hence this fix.	2017-07-03 02:53:49 -05:00
Scott Lahteine	57fff2e95e	Merge pull request #7219 from thinkyhead/bf_update_git_scripts ... Update Marlin+git helper scripts	2017-07-03 01:49:27 -05:00
Scott Lahteine	6a3967ee33	Corrections for probe_pt parameters	2017-07-03 01:34:27 -05:00
Scott Lahteine	534bffa7a9	Correct comment on ABL G29	2017-07-03 01:13:07 -05:00
Scott Lahteine	e1e1a0c344	Provide a default CUSTOM_BOOTSCREEN_TIMEOUT	2017-07-03 01:13:07 -05:00
Scott Lahteine	69297b2d7b	Make all EEPROM optimization options available	2017-07-02 20:47:03 -05:00
Scott Lahteine	d609489b22	Drop setup_homepin	2017-07-02 02:27:09 -05:00
Scott Lahteine	167169e1bf	Sanity check for a real probe with M48	2017-07-02 02:27:09 -05:00
Scott Lahteine	395a9f59ac	Merge pull request #7211 from thinkyhead/bf_lcd_bootscreen ... Use lcd_bootscreen for both	2017-07-02 02:11:07 -05:00
Scott Lahteine	14663efe0d	Merge pull request #7210 from fiveangle/printrboard_revf_cleanup ... Printrboard RevF cleanup	2017-07-02 01:02:26 -05:00
Scott Lahteine	ae5923a3d0	Make lcd_bootscreen common to both	2017-07-02 00:47:36 -05:00
Scott Lahteine	859248433f	Patch for gcode debug	2017-07-02 00:47:35 -05:00
Dave Johnson	09c90c2f6c	Printrboard RevF Cleanup ... -Update Arduino IDE extension descriptions -Set default motor currents if not defined in Configuration_adv.h -Support for MINIPANEL LCD -Support for choosing internal or panel SD	2017-07-01 22:33:39 -07:00
Scott Lahteine	232a10410d	LCD_FOR_MELZI	2017-07-01 22:32:20 -05:00
Scott Lahteine	76c92a1fab	Clean up some trailing spaces	2017-07-01 22:32:20 -05:00
Scott Lahteine	cf96109056	Implement the EEPROM_CHITCHAT option	2017-07-01 21:48:18 -05:00
Scott Lahteine	dcec7178d1	Expose DISABLE_M503 option as a test option	2017-07-01 21:31:28 -05:00
Scott Lahteine	3e78a01262	Merge pull request #7204 from thinkyhead/bf_update_ubl_lcd ... UBL radar map corrections	2017-07-01 20:59:03 -05:00
Tom	1ff7d10c80	Add configuration for Infitary M508 (i3 clone) ... Based on Infitary's own firmware settings.	2017-07-01 20:04:08 -05:00
Scott Lahteine	4cb45c10dd	Patch ubl lcd mesh map indentation	2017-07-01 19:47:52 -05:00
Scott Lahteine	abd6ba62b4	Some cleanups for ubl lcd mesh map	2017-07-01 19:47:49 -05:00
Scott Lahteine	f17bae1f70	Changes for ubl_lcd_map_control patch	2017-07-01 19:47:02 -05:00
Tannoo	8e0f3b7eba	UBL radar map corrections	2017-07-01 19:00:44 -05:00
Bob-the-Kuhn	fcceed5be6	intermittent Teensy & G26 compile problem ... =============================================== also an issue with ubl_motion.cpp	2017-07-01 14:41:24 -05:00
Scott Lahteine	30b327d24c	Finish the solution for #7166	2017-06-29 15:17:39 -05:00
Scott Lahteine	6c97c5595c	Add a sanity check for DELTA_AUTO_CALIBRATION	2017-06-29 15:03:19 -05:00
Bob-the-Kuhn	e6e3132f79	make LETTTER_OFF return values that match param indices range	2017-06-29 09:01:58 -05:00
Bob-the-Kuhn	bfbf5f8200	correct value_bool() when FASTER_GCODE_PARSER is enabled ... Also corrected compile issue when DEBUG_GCODE_PARSER and AUTO_BED_LEVELING_UBL are both enabled.	2017-06-28 19:51:08 -05:00
Scott Lahteine	406ef69702	Move Anet A8 config to subfolder	2017-06-28 16:58:57 -05:00
Scott Lahteine	379926961c	Add Anet A6 config, edit Anet A8 config	2017-06-28 16:58:57 -05:00
Scott Lahteine	5b03f23fa2	Bring configurations up to date, fix some comments	2017-06-28 16:41:49 -05:00
Scott Lahteine	e3cedfa0ec	Fix a compiler warning	2017-06-28 16:41:46 -05:00
Scott Lahteine	bb0508b6cf	Fix comment in M115 code	2017-06-28 13:08:33 -05:00
Scott Lahteine	85777a56c6	Add A (action) and E (echo) parameters to M118	2017-06-28 02:07:59 -05:00
Scott Lahteine	d1e8d4cd9d	Merge pull request #7167 from thinkyhead/bf_20x4_lcd_update ... UBL Map Cleanup and LCD display	2017-06-28 01:20:22 -05:00
Scott Lahteine	b492e0878d	Changes to reduce and simplify	2017-06-28 01:10:30 -05:00
Ben Lye	98d362c2da	Adding M118 command to send text to serial ... Allows the user to send text to the serial console in order to communicate with a host - sending debuging information or action commands, for example. Text must begin with '//' and this is added if it is not already present at the beginning of the string.	2017-06-28 00:55:20 -05:00
Tannoo	80abc872f3	Updated to better support the coming "radar"	2017-06-27 22:51:58 -05:00
Tannoo	e90cbf5c16	UBL Map Cleanup	2017-06-27 22:51:58 -05:00
Scott Lahteine	fc140c4962	Followup for I2C_POSITION_ENCODERS	2017-06-27 20:46:40 -05:00
Scott Lahteine	f4246dc8ff	Merge pull request #7165 from thinkyhead/bf_parser_shorthand ... Use parser.seenval, add shorthand functions	2017-06-27 18:57:48 -05:00
Scott Lahteine	bd776df8c1	Optimize seen_axis by moving 'X' to index 24	2017-06-27 18:47:11 -05:00
Scott Lahteine	05449cf6ee	Add shorthand value accessors to gcode.h	2017-06-27 18:39:41 -05:00
Scott Lahteine	12f092c812	Cleanups to gcode.h, use seenval()	2017-06-27 17:57:00 -05:00
Scott Lahteine	941943c167	Apply const, spacing, etc.	2017-06-27 05:23:49 -05:00
Scott Lahteine	5b11b33854	Add support for Průša MK2 Multiplexer	2017-06-27 04:55:30 -05:00
Scott Lahteine	a4a587a897	Fix spelling of Průša	2017-06-27 04:46:46 -05:00
Scott Lahteine	ba1706a265	Fix spacing in gcode.cpp ... Followup to #6940	2017-06-27 04:46:46 -05:00
Scott Lahteine	c2c8aafda2	Merge pull request #7157 from thinkyhead/bf_g33_f_parameter ... G33 F and Height bug fix	2017-06-27 04:36:22 -05:00
Scott Lahteine	627afb29df	Merge pull request #7109 from tnw513/fix-italian ... added missing italian translation	2017-06-27 04:12:30 -05:00
Scott Lahteine	f0f9fb7465	Remove line that does nothing	2017-06-27 04:08:50 -05:00
LVD-AC	99592c8458	Update G33: Add F, fix height bug	2017-06-27 04:02:02 -05:00
Ben Lye	31514f453a	Fix #ifdef AVR_AT90USB1286_FAMILY in pinsDebug ... Can't compile with PINS_DEBUGING enabled on Atmega1284p because it tries to enumerate pins 46 and 47 (which don't exist) because `#ifdef AVR_AT90USB1286_FAMILY ` doesn't work as expected.	2017-06-27 08:04:40 +01:00
Scott Lahteine	134116b874	Merge pull request #7153 from thinkyhead/bf_czech_update ... Updated Czech language	2017-06-26 17:34:15 -05:00
Petr Zahradník	e80958b631	CZ Translate BLTouch and UBL ... Fixup length	2017-06-26 16:15:31 -05:00
Scott Lahteine	fe7e890b09	Fix issues with ADC_KEYPAD ... Fixes #7150	2017-06-26 16:08:31 -05:00
dot-bob	a1632cfa0a	Added option 'H' to G29 P4. ... - Added `H` to set a nozzle height adjustment to surface of the bed. - Updated G29 P4 comments to reflect changes.	2017-06-25 17:14:08 -05:00
Scott Lahteine	e687782875	Merge pull request #7134 from thinkyhead/bf_skynet_a3_ready ... Add Skynet/ANET A10 support	2017-06-25 14:35:22 -05:00
dot-bob	b3c36c98fd	Edit digipot currents via LCD, save to EEPROM	2017-06-25 01:02:36 -05:00
Scott Lahteine	3c7bfe798d	Various cleanups ahead of digipot save	2017-06-24 23:56:24 -05:00
Bob-the-Kuhn	9651d01e1a	Add Skynet/ANET A10 support	2017-06-24 19:07:03 -05:00
Scott Lahteine	eb314373bb	Config spacing & consistency, group custom LCDs	2017-06-24 14:33:40 -05:00
Scott Lahteine	6c45fa7dcc	Apply #elif in LCD conditionals	2017-06-24 13:56:33 -05:00
Scott Lahteine	afbc6e3e2f	Update DELTA/SCARA config comments	2017-06-24 12:47:17 -05:00
Paweł Stawicki	1e47c17b46	Fix: set digipot mcp4018 Vrefmax to 1.666V	2017-06-24 12:35:34 -05:00
Scott Lahteine	80a232419d	CNC workspace planes and 'P' argument for G2/G3	2017-06-23 14:53:03 -05:00
Scott Lahteine	5fb0d401eb	Formatting tweaks	2017-06-23 14:53:02 -05:00
Scott Lahteine	ed04d0b6be	Label DualXMode enums	2017-06-23 14:53:02 -05:00
Scott Lahteine	786cdea124	Ensure REPRAPWORLD_KEYPAD_MOVE_STEP is defined	2017-06-23 14:53:01 -05:00
Scott Lahteine	ee7163fd3a	Fix pinsDebug compile errors	2017-06-23 14:53:01 -05:00
Scott Lahteine	a9f8e518bf	Fix FILAMENT_WIDTH_SENSOR infinite loop issue ... Addressing #6992 and #5851	2017-06-23 14:53:01 -05:00
Scott Lahteine	254a11b083	Merge pull request #7120 from thinkyhead/bf_sainsmart_link ... Add link to F. Malpartida LiquidCrystal library	2017-06-22 14:04:23 -05:00
Scott Lahteine	aeb6d465a4	Merge pull request #7118 from thinkyhead/bf_french_update ... French update	2017-06-22 13:10:07 -05:00
Bob-the-Kuhn	325f09ea6c	Add link to custom LiquidCrystal library by F. Malpartida	2017-06-22 13:07:08 -05:00
MagoKimbra	d26c8cc5c8	fix_planner_refresh_e_positioning (#7103) ... * fix_planner_refresh_e_positioning * Fix	2017-06-22 12:59:22 -05:00
Gege2B	c7f04fbcc7	French translation	2017-06-22 12:49:23 -05:00
Silvio Didonna	4171520729	added missing italian translation	2017-06-21 11:08:39 +02:00
Bob-the-Kuhn	41bfff14e2	Merge pull request #6991 from Bob-the-Kuhn/Mesh-with-babystepping ... Mesh with BABYSTEP_ZPROBE_OFFSET: add sanity check	2017-06-20 16:36:22 -05:00
Scott Lahteine	424d0bae8b	Merge pull request #7100 from thinkyhead/bf_HAL_prepare ... Apply maths macros and type changes ahead of HAL	2017-06-20 01:15:23 -05:00
Scott Lahteine	5c59ee4e93	Use current (raw) Z if omitted from G29 WXY or G29 WIJ.	2017-06-20 00:10:52 -05:00
Scott Lahteine	37bc0fce62	Make G29 compatible with M206 Z and G92 Z ... Use the raw position for mesh measurement. Otherwise the `M206` and `M92` Z offsets will get canceled out by bed leveling. The downside is `G29` will not compensate for a poorly set small `M206` fudge value. To elaborate on this issue, imagine you are probing with a Z home offset of -0.1, meaning when Z homes, -0.1 is the current position, implying the ideal bed zero for the nozzle is 0.1mm higher than the Z endstop. Ordinarily when printing, Z would raise 0.1mm higher. What happens when we probe is that all points are measured with that -0.1 included. So when bed leveling is enabled the `M206 Z` offset gets exactly canceled out by the bed readings.	2017-06-20 00:09:59 -05:00
Scott Lahteine	6c45d0fd81	Apply maths macros and type changes ahead of HAL	2017-06-19 22:57:42 -05:00
Scott Lahteine	8a51e2960c	Improve the experience of editing steps_per_mm	2017-06-19 22:17:15 -05:00
Scott Lahteine	725d9d9a56	Fix and improve LCD value editing display ... - Fix: When "100.0" changes to "99.0" the LCD shows "199.0" - Use 2 rows if needed on character LCD, (allowing longer labels… Germany, et. al.) - Known issue: A certain length label combined with a certain value drawing function could, for example, display 99.0 on 1 line, but 100.0 on two lines. Workaround would be to pass a nominal value size argument.	2017-06-19 22:17:15 -05:00
Scott Lahteine	499bb85a95	Clean up, put ubl menu itemization closer at hand	2017-06-19 22:17:14 -05:00
Tannoo	90f5f82926	Step-by-Step Menu addition	2017-06-19 20:15:11 -05:00
Scott Lahteine	0c616700f3	Merge pull request #7097 from thinkyhead/bf_dac_percents_fix ... Convert DAC percent to uint8_t	2017-06-19 17:58:55 -05:00
Florian Heilmann	6dcf42f1a7	Add Z Fade Height to M420 output if it is enabled (#7042) ... * Add Z Fade Height to M420 Output Echo the z-fade height when M420 is called, if it is enabled. * Fix Whitespace * Fix Compiler complaint * Missing semi-colon	2017-06-19 17:53:07 -05:00
Bob-the-Kuhn	a1c65fd3d5	convert DAC percent to uint8_t ... ===================== add test to Travis	2017-06-19 17:46:41 -05:00
Scott Lahteine	907cafcbfd	Support for two switching extruders	2017-06-19 17:20:59 -05:00
Ross Allan	cfcd069501	Fix #5699 - LIN_ADVANCE freeze when ADV_RATE returns 0	2017-06-19 14:02:17 -05:00
Scott Lahteine	b8b7ef1902	Merge pull request #7090 from thinkyhead/bf_italian_refix ... Fix Italian language mapper	2017-06-19 09:27:13 -05:00
Scott Lahteine	42f7f9e013	Merge pull request #7060 from bgort/i2cpefix ... I2C Position Encoders Example Configs	2017-06-19 01:08:42 -05:00
Scott Lahteine	0b49bddec2	Fix Italian language mapper	2017-06-19 01:01:40 -05:00
Silvio Didonna	2e26a7c752	Added missing Italian translations	2017-06-18 23:37:48 -05:00
Scott Lahteine	4c3dc8bf07	Remove set_current_to_destination from resume_print ... Addressing #7057	2017-06-18 23:01:13 -05:00
Scott Lahteine	4857a3ba48	Formatting and spelling	2017-06-18 23:01:12 -05:00
Thomas Moore	3d24c329af	M600 fixes	2017-06-18 23:00:56 -05:00
Bob-the-Kuhn	8fb30aaed6	warn user of an invalid combination	2017-06-17 15:04:47 -05:00
Bob-the-Kuhn	6cb9bb27fe	Move lcd_refresh_zprobe_zoffset definition	2017-06-16 21:46:33 -05:00
Scott Lahteine	d4270f15a9	Spacing tweak in setup()	2017-06-16 14:21:05 -05:00
Scott Lahteine	c61c0a9aeb	Fix status message missing "blink"	2017-06-16 14:18:19 -05:00
Scott Lahteine	062131554f	Followup to #7045	2017-06-16 14:18:19 -05:00
Jim Brown	3d043976f7	Add option to disallow filament change without homing first	2017-06-16 13:32:17 -05:00
Scott Lahteine	93da4e83f7	One more space on a short status message	2017-06-16 12:58:25 -05:00
Scott Lahteine	7c95f762f2	Show LCD bed options even without thermal protection	2017-06-15 15:29:56 -05:00
Scott Lahteine	92eb55f246	Reject generous donation of trailing whitespace	2017-06-15 15:25:24 -05:00
Scott Lahteine	428be27893	Formatting adjustments	2017-06-15 15:25:24 -05:00
Scott Lahteine	8d5a37fb3d	Support for a 5th stepper in stepper code	2017-06-15 15:25:23 -05:00
Scott Lahteine	7769a22064	Tweaks to temperature code	2017-06-15 15:25:23 -05:00
Scott Lahteine	d9da126776	Cleanups for UBL / ultralcd.cpp	2017-06-15 15:22:36 -05:00
Scott Lahteine	499d5c3b24	Fix scrolling lcd message for DOGM	2017-06-15 15:07:39 -05:00
Scott Lahteine	7164fd499e	Tweak to G33 P error	2017-06-15 14:43:40 -05:00
Scott Lahteine	c10d763d98	Simpler prepare move conditions	2017-06-15 14:43:40 -05:00
Scott Lahteine	4ebff8eaa5	Drop fastio timer cruft	2017-06-15 14:43:40 -05:00
Scott Lahteine	09bc34f4dc	Allow arbitrarily long retraction	2017-06-15 14:43:30 -05:00
Scott Lahteine	4414825e0d	Merge pull request #7038 from thinkyhead/bf_PCA9632 ... PCA9632 PWM color LED support	2017-06-15 14:41:24 -05:00
Bob-the-Kuhn	9dda022705	fix compile errors ... ================================ Changed to conditional compile for AT90USB issue	2017-06-15 13:18:14 -05:00
Bob-the-Kuhn	b3338ccb01	Merge pull request #6954 from Bob-the-Kuhn/Software-SPI-for-all-CPUs ... SD card soft SPI - allow all CPU families to use it	2017-06-15 01:03:39 -05:00
Brian	40bb0cbf7a	example configurations, etc.	2017-06-14 18:04:28 -04:00
Jim Brown	26d20ebcfc	Don't allow filament change without homing first (#7054)	2017-06-13 17:11:37 -05:00
Roxy-3D	824f71d503	LCD Panel Interactive Mesh Editing (#7045) ... Original Mesh Bed Leveling replacement put at top of UBL Menu Options to help facilitate the removal of the Original Mesh Bed Leveling. Radar display (and control) of the UBL Interactive Mesh Editing.	2017-06-12 18:26:49 -05:00
Scott Lahteine	445227c807	Fix missing LCD_STR_REFRESH	2017-06-12 01:28:52 -05:00
Scott Lahteine	699aa35df6	Code cleanup for G33	2017-06-12 01:25:40 -05:00
dot-bob	0bc66bf22c	PCA9632 PWM color LED support ... Add support for the PCA9632 PWM color LED driver used on the Ultimaker 2 and Wanhao Duplicator 6.	2017-06-12 01:09:24 -05:00
Luc Van Daele	896dfa0577	G33 eccentric probe fixes (#6850) ... * excentric probe config fix * undo last commit * eccentric probe fix * oops * !stow after each probe * deploy/stow fix * E parameter + bit of cleanup * comment * LCD menu fix	2017-06-12 01:07:19 -05:00
Thomas Moore	e47029199e	Remove ADVANCED_PAUSE_FEATURE requirement for PROBING_HEATERS_OFF (#7000) ... * Remove ADVANCED_PAUSE_FEATURE requirement for PROBING_HEATERS_OFF * Add HEATER_IDLE_HANDLER conditional	2017-06-12 00:22:31 -05:00
Scott Lahteine	8326c1c279	Merge pull request #7005 from Diederikvanderpant/bugfix-1.1.x ... added shift register pins for reprapworld keypad v1.1	2017-06-11 23:12:11 -05:00
Scott Lahteine	07f8da36d2	CL-260 configs	2017-06-11 19:40:13 -05:00
Scott Lahteine	dce665a083	Merge pull request #7025 from magnuspub/patch-1 ... Mod in language_it.h	2017-06-11 19:09:46 -05:00
Scott Lahteine	7b09ab6bda	Merge pull request #7033 from Bob-the-Kuhn/pinsDebug-&-dac_mcp4728-fixes ... Fix pinsDebug problem & add capability to display more than 70 pins	2017-06-11 19:09:09 -05:00
Scott Lahteine	5bdb4bbc5e	Merge pull request #7030 from thinkyhead/bf_circular_scroll ... Circular scrolling of the status message	2017-06-11 19:07:38 -05:00
Federico	772275ab0c	Create language_it.h	2017-06-11 10:37:34 +02:00
Bob-the-Kuhn	11e28f389e	fix pinsDebug.h error, add capability to display more than 70 pins.	2017-06-10 22:01:15 -05:00
Scott Lahteine	21217d53df	Circular scrolling of the status message	2017-06-10 20:56:00 -05:00
Scott Lahteine	da8e946efb	Reduce size of heater state print code	2017-06-10 20:26:17 -05:00
Scott Lahteine	dde8bb7c8b	Fix extrude_min_temp compiler warning	2017-06-10 20:07:36 -05:00
Scott Lahteine	83263076dc	Merge pull request #7014 from fiveangle/fix_get-set_DrvPct_declarations ... fix get/setDrvPct declarations	2017-06-10 19:06:50 -05:00
Scott Lahteine	57a51fd5db	Tweak some else clauses	2017-06-10 16:40:10 -05:00
Scott Lahteine	fc89de6d8b	Followup to German language update	2017-06-10 16:27:39 -05:00
Federico	92011e3d8c	Create language_it.h	2017-06-10 21:50:14 +02:00
Dave Johnson	7864b133a8	Fix get/setDrvPct declarations	2017-06-09 20:21:28 -07:00
Scott Lahteine	0b6b7c9c7e	Merge pull request #7013 from thinkyhead/bf_german_update ... Update language_de.h	2017-06-09 21:41:19 -05:00
Scott Lahteine	f17a3c2474	Merge pull request #6889 from thinkyhead/bf_at90usb_mapping ... Unify all AVR90USB pin mappings	2017-06-09 21:00:13 -05:00
Kai	5a72b6818e	update language_de.h ... Following #6990 some more translations and some grammar fixes	2017-06-09 19:45:09 -05:00
Scott Lahteine	4cc5444144	Merge pull request #7008 from Bob-the-Kuhn/Z_MIN_PROBE_ENDSTOP-and-Z_MAX_PIN ... Can't use "#define Z_MIN_PROBE_PIN Z_MAX_PIN" in configuration.h	2017-06-09 19:42:56 -05:00
Scott Lahteine	51bc50214a	Save 8 bytes of SRAM	2017-06-09 19:20:16 -05:00
Scott Lahteine	748bf32388	Unify AVR90USB: pinsDebug changes	2017-06-09 19:20:16 -05:00
Scott Lahteine	5426fc1735	Unify AVR90USB: Pins cleanup	2017-06-09 18:48:12 -05:00
Scott Lahteine	87d8223251	Unify AVR90USB: Pins remap to Arduino	2017-06-09 18:48:12 -05:00
Scott Lahteine	b378deaf89	Unify AVR90USB: fastio changes	2017-06-09 18:21:57 -05:00
Scott Lahteine	e94f79ccea	Patch some serial macros	2017-06-09 17:17:23 -05:00
Scott Lahteine	d91710e9aa	Followup for UBL translated strings	2017-06-09 16:59:26 -05:00
Scott Lahteine	761df686bd	Minor cleanup in gcode.h	2017-06-09 16:59:26 -05:00
Thomas Moore	897bc2ac1f	Updates for ensure_safe_temperature (#6963) ... * Updates for ensure_safe_temperature * M600 fixes	2017-06-09 15:19:08 -05:00
Bob-the-Kuhn	1c107b3949	delete problem line	2017-06-09 11:53:36 -05:00
Diederik van der Pant	5b270417ed	added shift register pins for reprapworld keypad v1.1 ... I recently upgraded my Marlin to V1.1.x and decided to publish my fix to make marlin compile properly when #define board megatronics 2 in combination with #define reprapworld keypad v1.1. It was previously described in the comments of a closed pull request. MarlinFirmware#472. All the buttons on the keypad are now operational.	2017-06-09 14:17:47 +02:00
bgort	2f55870edb	[New Feature] I2C position encoder support (#6946) ... * [New Feature] I2C position encoder support I plan to continue improving/cleaning this up, as there areas that need work. * let the cleanups begin. * progress * more progress * comments, rename files, etc. * clean * Cleanups per thinkyhead * a few more cleanups * cleanups, bugfixes, etc. * remove unnecessary passes_test(), additional cleanups/optimizations * cleanups * misc. * Fix up I2CPEM.init() and a few other things. * organize, fix, rename, etc. * more optimization * a few more tweaks	2017-06-09 08:06:23 -04:00
Bob-the-Kuhn	28d72f48f1	change to DWORD	2017-06-08 16:15:02 -05:00
Bob-the-Kuhn	8d1d9040b6	add static	2017-06-08 14:59:21 -05:00
Bob-the-Kuhn	a17ffe1ece	Merge pull request #6985 from Kaibob2/patch-1 ... Fix for #6980 (case_light compile problem when EXTENDED_CAPABILITIES_REPORT is enabled)	2017-06-08 11:18:56 -05:00
Tannoo	731c8e6372	Translatable Strings for ubl_G29 (#6990)	2017-06-08 10:09:39 -05:00
Kai	abb6b8ad54	update language_de.h (#6986) ... There was quite a lot to translate this time. I'm not absolutely confident with the whole UBL stuff and it's a PITA to translate. I don't use any kind of levelling myself as i just have a perfectly level cast aluminium plate as bed. So maybe someone who really uses it might take a closer look at it after it's merged.	2017-06-08 10:04:52 -05:00
Kai	c2eff60d3f	Fix for #6980 ... Line 7830 prevented successfull compilation when #define CASE_LIGHT_ENABLE is uncommented	2017-06-08 09:19:04 +02:00
Scott Lahteine	1419126721	Merge pull request #6965 from thinkyhead/bf_save_more_sram ... Use createChar_P to save SRAM in bootscreen	2017-06-07 17:34:19 -05:00
Scott Lahteine	a453be7357	Merge pull request #6973 from bgort/autoreportT ... Enable AUTO_REPORT_TEMPERATURES by default	2017-06-07 17:33:40 -05:00
Scott Lahteine	1d615e0a67	Merge pull request #6976 from Tannoo/Leveling_in_About_Printer ... Leveling type in About Printer	2017-06-07 17:26:21 -05:00
Scott Lahteine	707707d71a	Fix LCD status message padding	2017-06-07 16:07:38 -05:00
Scott Lahteine	e556ab1dff	Find three-point leveling points on Delta	2017-06-07 16:07:38 -05:00
Scott Lahteine	a27b08e6af	Various code style tweaks	2017-06-07 16:07:38 -05:00
Scott Lahteine	dac29e0f75	Cleaner failure of UBL without EEPROM	2017-06-07 16:07:38 -05:00
Scott Lahteine	9128d9ab45	Improve sanity checks with static_assert, organize	2017-06-07 16:07:38 -05:00
Scott Lahteine	6bb05c4543	Save 20b in smart_fill_mesh with PROGMEM	2017-06-07 16:07:38 -05:00
Scott Lahteine	b7dc4d9973	Save 92b PROGMEM, 14b SRAM with extruder auto fan	2017-06-07 16:07:38 -05:00
Scott Lahteine	c9e3caf928	Save lots of PROGMEM, ~20b SRAM with DIGIPOT_I2C	2017-06-07 16:07:38 -05:00
Scott Lahteine	4134a6b526	Save 88b PROGMEM, 48 bytes SRAM in settings.reset	2017-06-07 16:07:38 -05:00
Scott Lahteine	36cc03a9b4	Save 224b PROGMEM, 48b SRAM in get_homing_bump_feedrate	2017-06-07 16:07:38 -05:00
Scott Lahteine	2a41f0ff84	Save 28b PROGMEM in ultralcd.cpp (line_to_current)	2017-06-07 16:07:38 -05:00
Scott Lahteine	e6d10f6ddd	Spend 48b PROGMEM to save 16b SRAM ... ...by moving `homing_feedrate_mm_s` to PROGMEM.	2017-06-07 16:07:38 -05:00
Scott Lahteine	97e13a30ba	Save over 100 bytes SRAM in pin_is_protected	2017-06-07 16:07:38 -05:00
Scott Lahteine	45c74406cf	Recover 32 bytes of SRAM in Marlin bootscreen code	2017-06-07 16:07:38 -05:00
Scott Lahteine	e1c5a43247	Cleanup stepper current control config options	2017-06-07 16:07:38 -05:00
Scott Lahteine	efc198f952	Spacing, const, comments	2017-06-07 16:07:38 -05:00
Scott Lahteine	4406fba994	Fixes #6975	2017-06-07 11:14:30 -05:00
Scott Lahteine	d28f5d8a78	Fix: z_endstop_adj is never initialized	2017-06-07 10:29:56 -05:00
Scott Lahteine	5d5ff36446	Fix a compile error with _lcd_set_z_fade_height	2017-06-07 10:29:56 -05:00
Tannoo	b88957e0d4	Leveling type in About Printer ... Show the Leveling system in use on the About Printer screen.	2017-06-07 06:28:33 -06:00
Brian	dd071a4a65	Enable AUTO_REPORT_TEMPERATURES by default	2017-06-07 02:52:35 -04:00
bgort	8db1197c9b	Enable extended capabilities report by default (#6969) ... Ref #5139	2017-06-07 02:36:34 -04:00
bgort	82e662fc69	Remove requirement for LCD when UBL is used. (#6971) ... * Remove requirement for LCD when UBL is used. * fix previous oversights * further refinement - error messages for P2 & P4 * require R on G26 when not using LCD; default to all points	2017-06-07 02:24:36 -04:00
Tannoo	2c2b991b59	UBL Manual Build Menu Option (#6972) ... One click option to manually build UBL mesh.	2017-06-06 22:14:18 -05:00
Roxy-3D	0dd0033b33	Save up to 94 bytes of RAM on 20x4 LCD Display machines (#6964) ... * Save up to 94 bytes of RAM on 20x4 LCD Display machines Moved the custom screen characters out of RAM into Program Memory. With SD-Card support and the Progress Bar enabled, this saves 94 bytes of RAM memory. This was tested using the example_configurations/FolgerTech-i3-2020 files. So a couple small changes to those files snuck into this Pull Request. Probably... We can find similar savings in the Graphics LCD code it we comb through it. And if so... That is the place we really need to save RAM memory! * Tidy up white space and indentation	2017-06-05 17:02:00 -05:00
Bob-the-Kuhn	ba0bd33c38	Removed check for 2560 family	2017-06-04 22:16:27 -05:00
Scott Lahteine	04b07a6ecc	Unused var in Stepper	2017-06-04 17:25:16 -05:00
Scott Lahteine	eb8af486d2	Ensure safe temperature for M600	2017-06-04 17:25:16 -05:00
Scott Lahteine	bfe7fbe5c0	Maintain message scroll rate	2017-06-04 17:25:15 -05:00
Scott Lahteine	6411d65c48	Fix Morgan SCARA S2 calculation	2017-06-04 12:24:09 -05:00
Scott Lahteine	46752588b9	Merge pull request #6948 from Bob-the-Kuhn/redundant_temperature ... fix redefinition errors for redundant_temperature	2017-06-04 12:16:09 -05:00
Scott Lahteine	5938dae200	Merge pull request #6950 from MagoKimbra/fix_g29_3_point ... Fix G29 with 3 point	2017-06-04 12:15:44 -05:00
Scott Lahteine	c5e0f08e35	Merge pull request #6951 from fixoid/patch-4 ... Initializing extruder/nozzle servo when turning on the printer	2017-06-04 12:13:05 -05:00
Scott Lahteine	e4937b0285	Cleanup of spacing and formatting	2017-06-04 11:31:43 -05:00
fixoid	1aab9906e6	Initializing extruder/nozzle servo when when turning on the printer	2017-06-04 16:57:24 +03:00
MagoKimbra	663ff7f92a	Fix G29 with 3 point	2017-06-04 14:39:31 +02:00
oldmcg	9f295581f0	Ubl delta fixes and improvements (#6941) ... * Change all direct changes of ubl.state.active to set_bed_leveling_enabled() which handles apply/unapply leveling to maintain current_position consistency. Fix invalidation of UBL mesh to invalid unreachable mesh points as well (delta corners). Fix UBL_DELTA unapply_leveling logic and when it gets applied, including fade_height changes. Add optional M114 D for detailed position information, disabled from compilation by default (M114_DETAIL). * UBL_DELTA raw and inline kinematics * UBL planner fall through fix * consistent variable names * Cleanup orphaned code and whitespace changes. Use _O2. * compile warnings cleanup * Remove redundant #ifdef condition	2017-06-03 17:11:43 -05:00
Bob-the-Kuhn	c34d7a29a6	fix redefinition errors for redundant_temperature ... Removing redundant_temperature from public section and leaving it in the private section	2017-06-03 16:40:14 -05:00
Bob-the-Kuhn	6a5d3b580d	fix "hex_address not defined" when UBL is enabled	2017-06-03 13:19:55 -05:00
Scott Lahteine	789b2928a8	Tweak scrolling message code	2017-06-02 23:45:53 -05:00
Scott Lahteine	fc7d7f87b4	Init probe test pin with FastIO	2017-06-02 23:45:52 -05:00
Scott Lahteine	0282452cea	Make Parser::seen volatile	2017-06-02 23:45:52 -05:00
Scott Lahteine	9a305a467b	Patch LCD Contrast menu item	2017-06-02 23:45:52 -05:00
Scott Lahteine	90ccac4bcf	Clean up after recent commits	2017-06-02 23:45:52 -05:00
Bob-the-Kuhn	2130f10de8	allow space between parameter and value	2017-06-02 19:57:22 -05:00
Bob-the-Kuhn	ebda4663c3	for discusion	2017-06-02 19:42:43 -05:00
FATALHERMIT	911079104e	Support for ZRIB v2.0 Control Board	2017-06-02 12:05:46 -05:00
Scott Lahteine	65a0212866	Easier override of FILWIDTH_PIN	2017-06-02 12:05:46 -05:00
Scott Lahteine	147d9d76fc	Merge pull request #6928 from Bob-the-Kuhn/Fix-case-light-logic-on-Azteeg-X3-boards ... Fix case light logic on Azteeg_X3 boards.	2017-06-01 20:14:15 -05:00
guntherv73	4288c4fb4f	Configurations for Malyan M150	2017-06-01 19:26:29 -05:00
Scott Lahteine	1919cb0d1e	Config cleanups	2017-06-01 19:26:16 -05:00
Bob-the-Kuhn	9a9bbfc57c	Fix case light logic on Azteeg_X3 boards.	2017-06-01 12:33:24 -05:00
Thomas Moore	a32f7b329c	Fix heater status display for advanced pause	2017-06-01 12:29:47 -05:00
Scott Lahteine	445865ea03	REPRAPWORLD_KEYPAD is NEWPANEL but not ULTIPANEL	2017-05-31 23:48:03 -05:00
Scott Lahteine	4296a8b74e	For status scrolling, pad a short message	2017-05-31 23:48:03 -05:00
Scott Lahteine	4a96433b7e	Simplify counting of printable characters	2017-05-31 23:45:41 -05:00
Scott Lahteine	8d69394ae1	Fix LCD printing of progmem strings	2017-05-31 23:36:57 -05:00
Scott Lahteine	c74d4dede6	Prevent illegal leveling combinations ... Addressing issue #6901	2017-05-31 23:36:57 -05:00
Scott Lahteine	155aa62fb0	Merge pull request #6912 from thinkyhead/bf_better_pulse_delay ... Account for dual XYZ in pulse delay cycles estimate	2017-05-31 22:21:47 -05:00
Scott Lahteine	a5fa586642	Preferred patch to gcode.h	2017-05-31 21:18:16 -05:00
Bob-the-Kuhn	1b41e1f645	another compile error ... only seen if #if ENABLED(TEMPERATURE_UNITS_SUPPORT) ... #if ENABLED(ULTIPANEL) && DISABLED(DISABLE_M503)	2017-05-31 13:59:49 -05:00
Bob-the-Kuhn	65bd4c8c94	Merge pull request #6797 from Bob-the-Kuhn/M355-case-lightimprovements-(1.1.x) ... M355 case light improvements (replaces PR #5685)	2017-05-31 13:33:59 -05:00
Bob-the-Kuhn	9657e7d3ee	copied file changes from PR #5685 ... ============================== Configuration_adv.h changes ============================== add "live" LCD update ============================== P & S version ============================== final (hopefully) tested version ============================== update M115 capabilities print ============================== Menu changes portion of the requested changes ============================== changed USEABLE_HARDWARE_PWM from a function to a series of macros ============================== changes per review	2017-05-31 13:22:38 -05:00
Bob-the-Kuhn	8206bb9bb9	fix compile error ... invalid conversion from 'const char*' to 'char*' [-fpermissive]	2017-05-31 13:17:01 -05:00
Scott Lahteine	df91346188	Account for dual XYZ in pulse delay cycles estimate	2017-05-31 12:23:28 -05:00
Scott Lahteine	7236109f2a	Patch M24 / M125 for delta	2017-05-30 23:07:29 -05:00
Scott Lahteine	be17033762	Fix case light menu toggle	2017-05-30 14:03:45 -05:00
Scott Lahteine	89b93058e3	Merge pull request #6887 from christianh17/PR-sanitycheck ... enable DEACTIVATE_SERVOS_AFTER_MOVE with switching nozzle	2017-05-30 13:43:39 -05:00
Scott Lahteine	05b66234ae	Merge pull request #6895 from thinkyhead/bf_user_commands ... Custom user commands menu	2017-05-30 13:40:50 -05:00
Scott Lahteine	84a0a77c59	Merge pull request #6852 from tcm0116/mixing_extruder_lin_advance ... Generate error if MIXING_EXTRUDER and LIN_ADVANCE are both enabled	2017-05-30 13:37:51 -05:00
Scott Lahteine	266ae8912a	Formatting in _draw_heater_status	2017-05-30 03:32:16 -05:00
Scott Lahteine	6b9ca16f36	Patch lcd_print edge limit code	2017-05-30 03:32:15 -05:00
Tannoo	74d6dee920	User Command (Script) Menu ... The menu (commands / scripts) is configurable in `Configuration_adv.h`. - Added conditionals. - Changed script handling. - Slimmed and working! - Added Status message. - Returning to lcd status screen now! - Example Configs Updated. - Cleanups by @thinkyhead	2017-05-30 02:33:57 -05:00
Scott Lahteine	d9c8072037	Edit PROPORTIONAL_FONT_RATIO comment	2017-05-30 01:29:39 -05:00
Scott Lahteine	46b32e4548	Cleanup LCD interface, add lcd_reset_status	2017-05-29 22:16:13 -05:00
Scott Lahteine	ca99d67ede	Fix UBL "Info screen" menu items	2017-05-29 19:55:26 -05:00
Scott Lahteine	2c7a39bc0e	Fix LCD print aborted message	2017-05-29 19:52:01 -05:00
Scott Lahteine	0f1e8c195d	Draw on LCD after value has changed	2017-05-29 19:42:30 -05:00
Scott Lahteine	51587c4b43	Rename Feedrate to Velocity to match prior naming	2017-05-29 17:54:15 -05:00
Scott Lahteine	9677f3f2f5	Patch up LCD Bed Leveling menu	2017-05-29 17:51:11 -05:00
Scott Lahteine	fc2eaab7f3	Show home option in level bed menu	2017-05-29 17:51:10 -05:00
Scott Lahteine	c6a7adc293	Patch G29 A and Q arguments to bypass setup	2017-05-29 17:51:10 -05:00
Scott Lahteine	4cece2d72e	Use NAN for G29 W omitted parameters	2017-05-29 17:51:10 -05:00
Scott Lahteine	2d71569138	Fix spacing in JSON output	2017-05-29 17:51:10 -05:00
Scott Lahteine	b2d3c8aedd	Have G28 do a refresh of the display	2017-05-29 17:51:10 -05:00
Scott Lahteine	50ab9c2e04	General cleanup of spacing, comments	2017-05-29 15:34:14 -05:00
Scott Lahteine	f1e33afda4	Return to Bed Leveling menu when done	2017-05-29 15:31:02 -05:00
Scott Lahteine	78d8c598e1	Fix lcd_synchronize with message	2017-05-29 15:31:02 -05:00
Scott Lahteine	eb39d6e3e2	Don't draw progress bar until it has 1%	2017-05-29 15:31:01 -05:00
Scott Lahteine	194f8b2f55	Start at Z=0 in manual probing	2017-05-29 15:31:01 -05:00
Scott Lahteine	6f89db11f0	Allow lcd_setstatusPGM to reset the alert level	2017-05-29 15:31:00 -05:00
Scott Lahteine	3fe333143c	Case light as a toggle menu item	2017-05-28 14:32:07 -05:00
Scott Lahteine	d013bddfa8	Merge pull request #6876 from thinkyhead/bf_extend_leveling_menu ... Extend the ABL/MBL Bed Leveling menu	2017-05-28 14:19:02 -05:00
Scott Lahteine	01e7e234c6	Add more options to the Bed Leveling menu	2017-05-28 14:04:28 -05:00
Scott Lahteine	0cbe448edf	Split up Control > Motion submenu	2017-05-28 12:52:24 -05:00
Scott Lahteine	a3645ec921	Reference op with variable name	2017-05-28 11:33:22 -05:00
Scott Lahteine	71367fd518	Scrolling status message option	2017-05-28 11:26:28 -05:00
Scott Lahteine	b0eae68f57	Prevent bed temperature being set too high	2017-05-28 11:11:17 -05:00
Scott Lahteine	493f0b0c62	Fix some compiler warnings	2017-05-28 11:06:33 -05:00
christianh17	f379a326cc	enable DEACTIVATE_SERVOS_AFTER_MOVE with switching nozzle ... When using switching nozzle it should be possible to disable the servo after move. Do it only if you do not need the servo power to keep the position.	2017-05-28 15:33:28 +02:00
Scott Lahteine	33279a1e02	Code style tweak to gcode.h	2017-05-27 19:47:26 -05:00
Ernesto Martinez	ac959b12ee	Updates to language_es.h based on latest updates. (#6871) ... Spanish language updates	2017-05-27 19:08:39 -05:00
Scott Lahteine	55c700d537	Tweak to gcode.h	2017-05-26 22:11:31 -05:00
Bob-the-Kuhn	868e7db4ae	value check was looking at the code	2017-05-26 14:49:42 -05:00
Thomas Moore	fb5e0ffe16	Unify M600 and M125 pause features (#6407) ... * Unify M600 and M125 pause features * Cleanup per thinkyhead's comments * Rename filament_change_menu_response to advanced_pause_menu_response * Include HAS_BED_PROBE in QUIET_PROBING * Update gMax example file * is_idle() is out of scope without the braces * Convert FT-i3-2020 to Advance Pause names... * Allow pause even if not printing	2017-05-26 13:01:02 -05:00
Scott Lahteine	b3a97b5013	Patch up LCD level bed menus	2017-05-25 23:53:31 -05:00
Scott Lahteine	78af2b1444	Fix PROBE_MANUALLY via G-code	2017-05-25 23:53:31 -05:00
Scott Lahteine	082da23391	One fewer EOL in M503 output	2017-05-25 23:53:31 -05:00
Scott Lahteine	b15e531464	Fix screen change on character display	2017-05-25 15:29:14 -05:00
Thomas Moore	44e657766e	Add incompatibility error to Sanity Check for MIXING_EXTRUDER and LIN_ADVANCE	2017-05-25 08:06:27 -05:00
Scott Lahteine	735405b2a4	Merge pull request #6848 from thinkyhead/bf_scara_M665 ... Add M665 for SCARA	2017-05-24 20:51:51 -05:00
Scott Lahteine	ffa901f373	Merge pull request #6839 from thinkyhead/bf_day_ending_in_y ... UBL ultralcd.cpp patches	2017-05-24 17:55:44 -05:00
Scott Lahteine	361cbba113	Use M665 to set SCARA angle offsets	2017-05-24 17:49:24 -05:00
Scott Lahteine	5ed63a5724	Apply const in prepare_kinematic_move_to	2017-05-24 17:49:24 -05:00
Scott Lahteine	5cbe0244c5	Fixes for spindle/laser and SCARA probe bounds	2017-05-24 17:49:23 -05:00
Scott Lahteine	1f52c9f5df	Neater Megatronics 3 pins	2017-05-24 17:49:23 -05:00
Scott Lahteine	af81cb4cbb	Patch for M503 output	2017-05-24 17:49:09 -05:00
Scott Lahteine	1d167a6874	Some cleanup, fixes for ultralcd.cpp UBL code ... - Free up 30 bytes of SRAM in UBL LCD code - Fix BUILD_ABS_MESH temperature - Fix UBL indentation in ultralcd.cpp - UBL vars lowercase, "convert to positive" sensibly	2017-05-24 01:10:42 -05:00
Scott Lahteine	f4028fe088	New GCode Parser - Implementation	2017-05-23 14:15:10 -05:00
Scott Lahteine	002a06c507	New GCode Parser - Configuration	2017-05-23 14:15:07 -05:00
Scott Lahteine	ad915b667e	One more mesh_index_to_npos update ... Followup to #6827	2017-05-23 13:02:50 -05:00
Scott Lahteine	2881f0a48d	Fix, extend G42 with P (probe) parameter ... - Also fix handling of SCARA and misuse of `codenum`.	2017-05-23 04:55:42 -05:00
Scott Lahteine	d252d1b6a2	Merge pull request #6831 from thinkyhead/bf_move_g7 ... Move G7 to G42	2017-05-23 03:02:57 -05:00
Brian	82ca6248e2	Move G7 to G42 ... See: #6777	2017-05-22 23:21:35 -05:00
Scott Lahteine	26ffa558a3	Use redraw flag for both types of LCD	2017-05-22 18:34:54 -05:00
Scott Lahteine	3ff7515527	Merge pull request #6817 from cbusillo/patch-1 ... missing enable for M605 for duplication mode	2017-05-22 18:07:11 -05:00
Scott Lahteine	34cfbc90cd	Use new attribute macros in more places	2017-05-22 17:38:58 -05:00
Scott Lahteine	85b967657e	Embed G26/G29 in ubl class, with enhancements	2017-05-22 17:38:58 -05:00
Scott Lahteine	c99bd69889	Apply const float & more	2017-05-22 17:38:36 -05:00
Scott Lahteine	ad5638f78c	Cleanup some fastio code	2017-05-22 17:38:36 -05:00
Scott Lahteine	e271521c39	Single user_canceled function in G26	2017-05-22 17:38:36 -05:00
Scott Lahteine	c2ea22da49	Clean up whitespace	2017-05-22 17:38:36 -05:00
Scott Lahteine	ceb62fc7e1	Fixes #6828: M428 bug	2017-05-22 17:34:03 -05:00
oldmcg	48f7652143	UBL G29 -P3.1 smart fill (#6823) ... * UBL G29 -P3.1 mesh fill with distance-weighted least squares fit. * Back to original -O0 on G29 for now.	2017-05-22 12:33:50 -05:00
Scott Lahteine	850203fb3a	Merge pull request #6816 from thinkyhead/bf_lcd_live_editing ... Constrain LCD status message rendering	2017-05-22 11:15:35 -05:00
Roxy-3D	3129260c44	Misc. Clean Up (#6822) ... * Misc. Clean Up Mostly UBL related clean up. - But fixed a bug in the thermistortables. - Made G26 more responsive to user aborts. - Added sanity checks for older name for UBL_MESH_VALIDATION. - Made G29 P4 able to edit invalidated mesh points - Restore a reasonable Fade Height for UBL when creating new state information - Get UBL's Topology Map to look a little bit better - Make sure the user doesn't see a blank screen when doing Mesh Editing. * Huh??? GitHub Desktop screwed up! * get the planner object in scope * Fix out of scope z_fade_height * Travis timed out... I need a change so I can force a new commit and sync.	2017-05-21 22:09:51 -05:00
cbusillo	3b4116e73b	missing enable for M605 for duplication mode ... I believe gcode_M605 will not be called when using DUAL_NOZZLE_DUPLICATION_MODE without this change.	2017-05-21 13:54:20 -04:00
Scott Lahteine	5e8892d6b5	Show Restore Failsafe item with EEPROM off	2017-05-21 12:52:44 -05:00
Scott Lahteine	76af9ac7c5	tweaks	2017-05-21 12:51:58 -05:00
Scott Lahteine	ba5910ab6c	Constrain LCD status message rendering	2017-05-21 12:35:16 -05:00
MagoKimbra	2c309a8f7c	Fix set_lcd_contrast	2017-05-21 19:01:44 +02:00
Scott Lahteine	22dbb2117c	Merge pull request #6812 from thinkyhead/bf_day_ending_in_y ... Cleanup code, organize & document fastio pin mappings	2017-05-21 11:39:04 -05:00
Roxy-3D	364f8fb613	Update Configuration.h files to better names (#6814) ... Changed UBL_G26_MESH_EDITING to UBL_G26_MESH_VALIDATION Added UBL_MESH_EDIT_MOVES_Z to prepare for that change (coming next)	2017-05-21 11:10:22 -05:00
Scott Lahteine	d7fda2fe49	Formatting, const in G33	2017-05-21 10:40:05 -05:00
Scott Lahteine	1519b0e7c1	Split up fastio.h, document pin mappings	2017-05-21 10:33:27 -05:00
Scott Lahteine	49599caade	General cleanup to utf_mapper.h	2017-05-21 10:33:27 -05:00
Scott Lahteine	02f15f6775	UBL-related cleanup, spacing, standards ... Reference: #6804	2017-05-21 10:33:26 -05:00
Scott Lahteine	52e20aeab3	Pins-related cleanup, formatting	2017-05-21 07:18:03 -05:00
Scott Lahteine	ea906e4da7	Merge pull request #6810 from thinkyhead/bf_lcd_live_editing ... Add "live editing" option to LCD menus	2017-05-21 06:11:52 -05:00
Scott Lahteine	11fc9564c9	Add live editing option to LCD menu	2017-05-21 05:29:46 -05:00
Scott Lahteine	8a0a5cfccc	Temp-related cosmetic changes	2017-05-21 04:49:25 -05:00
Scott Lahteine	b29dbbd5e4	Use uint16_t for temps	2017-05-21 04:48:53 -05:00
Scott Lahteine	ebcd1aaf88	Access hotend/bed temperatures as float	2017-05-21 04:46:31 -05:00
Scott Lahteine	6ce2b1ff4a	G33 evolutionary changes	2017-05-20 19:23:39 -05:00
Scott Lahteine	3c061a9f9a	UBL tabs, whitespace, spelling, etc.	2017-05-19 14:16:50 -05:00
Scott Lahteine	75badae2f8	Disable PROBE_MANUALLY for UBL ... Plus some other UBL tweaks.	2017-05-19 07:13:18 -05:00
Scott Lahteine	94a4af1d7f	Merge pull request #6773 from thinkyhead/bf_lcd_patch_e5 ... Patch LCD code for 5th extruder	2017-05-18 15:26:55 -05:00
Brian	01f452c37c	Tweak Azteeg X3 PRO _pins.h so Viki2 will work for those without a case light. ... - add comment explaining that the Panucatt Viki2 wiring diagram uses pin 44	2017-05-18 13:00:13 -04:00
Brian	e09b4ce4a5	Add checking	2017-05-17 19:46:16 -04:00
Brian	13599a73c7	Add G7 gcode command to move between UBL mesh points ... - can be augmented in the future to enable for other leveling systems Quite simple, but did not want to modify `G1` as the additional checking would slow it down. Tested & working.	2017-05-17 19:05:36 -04:00
Brian	43c24f0027	Fix recent regressions, &c. ... - fix broken `M421` due to less-than-careful optimization - add HOME_AFTER_DEACTIVATE define to advanced config so not everyone has to rehome after steppers are deactivated - misc. cleanups (remove unused label, unused variables)	2017-05-17 17:21:46 -04:00
Scott Lahteine	3843a5151a	Patch LCD code for 5th extruder, EEPROM reset	2017-05-17 15:33:51 -05:00
Scott Lahteine	6c064bb7d6	Some probe_pt error-handling	2017-05-17 15:33:51 -05:00
Brian	3370329751	Fix broken EEPROM save/load	2017-05-17 12:41:27 -04:00
Scott Lahteine	f0fe26c411	Ensure Arduino.h and configs are included for serial.cpp	2017-05-17 05:07:35 -05:00
Scott Lahteine	ffb5353294	Merge pull request #6738 from thinkyhead/bf_config_crc_rebase ... Implement CRC16, develop mesh allocation table	2017-05-17 04:44:00 -05:00
Scott Lahteine	e806e6419a	Merge pull request #6768 from thinkyhead/rc_spindle_m3_m5 ... Spindle / Laser support	2017-05-17 04:39:32 -05:00
Scott Lahteine	d6f49c6626	Merge pull request #6752 from jdelahayes/bugfix-1.1.x ... Update french language	2017-05-17 04:32:28 -05:00
Scott Lahteine	55a87da036	SPINDLE/LASER implementation	2017-05-17 04:26:15 -05:00
Scott Lahteine	ffe0e2d19a	SPINDLE/LASER pins changes	2017-05-17 04:23:06 -05:00
Scott Lahteine	99c4900a98	SPINDLE/LASER config changes	2017-05-17 04:23:06 -05:00
Scott Lahteine	a3abfeac47	Mark strings needing translation	2017-05-17 03:49:33 -05:00
Scott Lahteine	7f4e4b1212	UBL name/state methods	2017-05-17 03:49:32 -05:00
Brian	7852369987	Implement CRC16, develop mesh allocation table ... - Add crc16 utility function - Implement CRC16 for config store, remove old checksum, increment layout version - Move UBL mesh store/load to MarlinSettings; increment UBL_VERSION - Begin to lay out MAT structure, prototype functions, etc. - Rename ubl.state.eeprom_storage_slot to .storage_slot - Misc. optimization - Cleanup/standardize/improve some messages This is a work in progress!	2017-05-17 03:49:19 -05:00
Scott Lahteine	00d358d92d	Fix a PROBE_MANUALLY bug in ultralcd.cpp	2017-05-17 03:49:19 -05:00
fixoid	c2321b1cdd	Separate SWITCHING_NOZZLE and SWITCHING_EXTRUDER	2017-05-16 19:25:17 -05:00
Scott Lahteine	238fb53617	Patch home_all_axes to ignore G28 XYZ parameters	2017-05-16 16:18:38 -05:00
Scott Lahteine	6b6630e11b	Clean up trailing whitespace and tabs	2017-05-16 16:06:18 -05:00
Roxy-3D	d30e478f97	Fix incorrectly optimized find_closest_mesh_point_of_type() function (#6761)	2017-05-16 15:24:24 -05:00
oldmcg	5a9e52a3e0	Use COPY_XYZE macro to copy exactly 4 elements (#6758) ... Fix undefined DELTA_PROBEABLE_RADIUS for UBL_DELTA	2017-05-16 11:47:51 -05:00
Roxy-3D	8606644343	M48 Fix for Delta Configuration Files & UBL G29 only homes when necessary (#6757) ... * Fix M48 for Delta's There was a scope issue: DELTA_PROBEABLE_RADIUS wasn't getting defined. * Check if the specified G29 command requires homing	2017-05-16 11:23:50 -05:00
Tannoo	0cd398c25d	UBL Menu Updates (#6751) ... Things should be pretty stable for a while. But it wouldn't surprise me if the Delta people have a need for a few special commands.	2017-05-16 08:45:31 -05:00
Johann Delahayes	a5737cba7c	Update french language	2017-05-16 12:27:42 +02:00
Scott Lahteine	0fef9a2983	Remove "ubl." prefix from calls within ubl method	2017-05-16 01:19:45 -05:00
Scott Lahteine	14a4257c7b	UBL tabs, whitespace, spelling, etc.	2017-05-16 01:19:45 -05:00
Scott Lahteine	56e2e331ed	UBL G29: replace 'O' with 'T' ... Since we already used 'T' for `G29` Topology Report in the past, and since 'T' is available…	2017-05-16 01:18:41 -05:00
Scott Lahteine	091f94a6bf	Fix up M421 and some comments	2017-05-16 01:14:03 -05:00
Scott Lahteine	4ec4ecff1a	Reduce find_closest_mesh_point_of_type a little	2017-05-16 01:14:03 -05:00
Scott Lahteine	f1a1c6873e	Patch lcd_implementation_status_screen compiler warning	2017-05-16 00:59:50 -05:00
moebyusDev	2266c0780d	fixed spanish lang ... It was missing MSG_FILAMENT_CHANGE_HEAT_2 and MSG_FILAMENT_CHANGE_HEATING_2	2017-05-16 00:35:36 -05:00
oldmcg	b213a45efb	UBL_DELTA post merge cleanup (#6705) ... * UBL_DELTA post merge cleanup: fix fade_height, lost during some previous merge fix float cx,cy which are not const move repeated z_cxcy calc line inside loop style fixes and comment fixes/alignment * Update ubl_motion.cpp remove unnecessary parentheses * Update Conditionals_post.h Change name of define to more accurate meaning: UBL_GRANULAR_SEGMENTATION_FOR_CARTESIAN which is not and should not be the default for cartesians with UBL.	2017-05-16 00:30:29 -05:00
Roxy-3D	6f86c46fa6	Fix typo that caused scope issues for DELTA (#6750)	2017-05-15 23:13:45 -05:00
Roxy-3D	1fbcbc05f6	UBL no longer flout's the sacred GCode standard (#6745) ... Also clean up ubl_motion.cpp debug info and fix declaration of cx & cy	2017-05-15 16:25:01 -05:00
Scott Lahteine	c262ea92e0	Merge pull request #6733 from abusca/Euskera ... Updated Basque translation	2017-05-15 02:30:11 -05:00
Scott Lahteine	267f77b18b	More constraint on axis_unhomed_error	2017-05-14 16:03:02 -05:00
Aaron Busca	645096b87a	Updated Basque translation ... Updated Basque translation with new strings.	2017-05-14 18:29:50 +02:00
Roxy-3D	40d95a4e23	Update the gMax files to display better with Proportional Fonts (#6727) ... Update the gMax files to display better with Proportional Fonts	2017-05-13 16:33:04 -05:00
Roxy-3D	c06af63f87	G26's default behaviour ought to be the entire mesh (#6726) ... Adding the capability to specify ahead of time how much of the validation pattern to print made it so by default G26 only did one circle and no connecting lines. It is more natural for the unsophisticated user to just do the entire mesh (bed). We default the repetition count to GRID_MAX_POINTS+1 to insure we get every last one of them!	2017-05-13 15:53:44 -05:00
Roxy-3D	15040821e0	Setup FolgerTech-i3-2020 files better for the user (#6724) ... UltiPanel was enabled, but technically, it is a REPRAP_DISCOUNT_SMART_CONTROLLER Either configuration works on the machine. But we want it 'Right'. Setup the Proportional Font spacing so columns line up nicer on PronterFace and Repetier Host.	2017-05-13 15:14:03 -05:00
Scott Lahteine	67c9b1e332	Update M665 comment, fix M665 code_value code.	2017-05-13 05:11:29 -05:00
Scott Lahteine	37399e3cb5	Fix prepare_move_to_destination_cartesian for UBL	2017-05-13 04:13:19 -05:00
Scott Lahteine	a7fb55ea6d	Use GRID_MAX_POINTS. Some formatting	2017-05-12 06:57:19 -05:00
Scott Lahteine	e51b5774db	Merge pull request #6699 from mtowara/patch-1 ... Bugfix PRINTER_EVENT_LEDS	2017-05-12 05:58:25 -05:00
Scott Lahteine	056350d9bf	Merge pull request #6656 from FHeilmann/fix_fwretract_pos_z_move ... Fix FWRetract with positive z-moves during retracted state	2017-05-12 05:56:08 -05:00
Scott Lahteine	0e582bcfb7	Fix #6691 - redundant line in M665	2017-05-12 05:17:38 -05:00
Markus Towara	68ae7c8d7a	Bugfix PRINTER_EVENT_LEDS ... Extra closing curly bracket terminates while loop early if PRINTER_EVENT_LEDS defined	2017-05-12 12:13:23 +02:00
Scott Lahteine	ba29da56e0	Add disclaimer for verboten parameters	2017-05-12 02:34:53 -05:00
Scott Lahteine	0696dda470	Cleanups to UBL_DELTA	2017-05-12 02:34:53 -05:00
Scott Lahteine	cbfca29522	M421 tweaks, just to use const	2017-05-12 01:32:34 -05:00
Scott Lahteine	233f824dd6	Define GRID_MAX_POINTS	2017-05-12 01:32:34 -05:00
Scott Lahteine	b17e2d3dcd	Apply const in Marlin_main.cpp	2017-05-12 01:32:33 -05:00
Scott Lahteine	92fbea2906	Add some GCodes to the header of Marlin_main.cpp	2017-05-12 01:32:33 -05:00
Scott Lahteine	94e90ca26c	Tweak M80/M81 descriptions	2017-05-12 01:32:33 -05:00
Scott Lahteine	ee50dfaaf3	Adjust G26 arguments	2017-05-12 01:32:33 -05:00
Scott Lahteine	b0ba5cae73	Fix a spelling boo	2017-05-12 01:32:33 -05:00
oldmcg	91841d75c9	UBL_DELTA (#6695) ... UBL on Delta's.... Should be close! Should not affect any Cartesian printer.	2017-05-11 22:33:47 -05:00
bgort	445003dbb8	Merge pull request #6694 from bgort/g29p2b ... UBL: Minor improvement to G29 P2	2017-05-11 20:44:43 -04:00
Brian	5a5dba6fc8	UBL: Minor improvement to G29 P2 ... - allow H code value to override probing height - minor cleanups	2017-05-11 18:54:34 -04:00
Brian	ae676490c9	M421: Add 'adjust closest point' capability ... - Split M421 into separate versions for bilinear and ubl - Fix minor issue in G26	2017-05-11 12:10:38 -04:00
Scott Lahteine	9a688d1456	Merge pull request #6682 from thinkyhead/bf_M80_s_arg ... "M80 S" to report the state of the PSU pin	2017-05-10 20:29:01 -05:00
Roxy-3D	b63e82f309	M421 Mesh Point Offset and misc. UBL clean up (#6685) ... * M421 Mesh Point Offset and misc. UBL clean up Allow M421 to accept an offset as well as absolute value for a specified mesh point. And misc. UBL clean up to reduce redundent code. * Better error checking for M421 * Fix M421 Y index bug I just noticed.... We've had a Y index bug for who knows how long?	2017-05-10 18:54:10 -05:00
Pablo Ventura	539e0c2f31	"M80 S" to report the state of the PSU pin	2017-05-10 17:58:58 -05:00
bgort	df42428281	Merge pull request #6665 from bgort/font ... Add proportional font adjustment ratio	2017-05-10 17:30:51 -04:00
Brian	2604742191	Add proportional font adjustment ratio ... - update example configs	2017-05-10 17:19:03 -04:00
bgort	b3407a371b	Merge pull request #6676 from bgort/g26zhop ... G26: Add 0.5mm Z-bump between circles to minimize pattern scraping	2017-05-10 17:12:05 -04:00
bgort	c33d99c5b2	Merge pull request #6680 from bgort/g26repeat ... G26: Add 'Repeat' Option	2017-05-10 17:11:34 -04:00
Bob-the-Kuhn	7325035aac	Merge pull request #6637 from Tannoo/UBL_Menu_System_1.1 ... UBL Menu System 1.1	2017-05-10 15:54:48 -05:00
Brian	f7a201b0d0	G26: Add 'Repeat' Option ... - Allows for specifying number of points to print/validate, using 'R' code like with G29 P4 Rx - Moved the code for Random to 'M' so we could be consistent with G29 P4 - G26 instructions indenting/cleanup	2017-05-10 16:52:08 -04:00
Brian	9c5957fc77	G26: Add 0.5mm Z-bump between circles to minimize pattern scraping	2017-05-10 16:11:59 -04:00
Brian	4da14b14f4	UBL Cleanup/Bugfix ... - Fix bug in ubl_line_to_destination - Improve/fix output of some ubl.h functions	2017-05-10 13:56:17 -04:00
Tannoo	66db6c3acc	UBL Menu System 1.1 ... /** * UBL System submenu * * Prepare * - Unified Bed Leveling * - Activate UBL * - Deactivate UBL * - Mesh Storage * Memory Slot: * Load Bed Mesh * Save Bed Mesh * - Output Map * Map Type: * Output Bed Mesh Host / Output Bed Mesh CSV * - UBL Tools * - Build Mesh * Build PLA Mesh * Build ABS Mesh * - Build Custom Mesh * Hotend Temp: * Bed Temp: * Build Custom Mesh * Info Screen * - Build Cold Mesh * - Fill-in Mesh * Fill-in Mesh * Smart Fill-in * Manual Fill-in * Info Screen * Continue Bed Mesh * Invalidate All * Invalidate Closest * - Validate Mesh * PLA Mesh Validation * ABS Mesh Validation * - Custom Mesh Validation * Hotend Temp: * Bed Temp: * Validate Mesh * Info Screen * - Edit Mesh * Fine Tune All * Fine Tune Closest * - Adjust Mesh Height * Height Amount: * Adjust Mesh Height * Info Screen * - Mesh Leveling * 3-Point Mesh Leveling * - Grid Mesh Leveling * Side points: * Level Mesh * Info Screen * - Output UBL Info */	2017-05-10 12:14:43 -05:00
Brian	3b0127cf8e	Fix compiler complaint related to M100	2017-05-09 21:45:44 -04:00
Scott Lahteine	11104f177b	Apply const in BABYSTEPPING	2017-05-09 12:37:23 -05:00
Scott Lahteine	081bf1f879	Patch #else / #endif comments	2017-05-09 12:37:23 -05:00
Scott Lahteine	a9487c9443	Reduce redundancy in BLTOUCH conditionals	2017-05-09 11:52:24 -05:00
Scott Lahteine	8d961b51cc	Eliminate M100 compiler warnings?	2017-05-09 11:32:15 -05:00
bgort	efb9ce24d9	Merge pull request #6645 from tcm0116/bltouch_config ... Automatically define Z_MIN_PROBE_ENDSTOP_INVERTING for BLTouch	2017-05-09 09:49:16 -04:00
bgort	e2f07917ab	Merge pull request #6644 from tcm0116/bltouch_menu ... Move BLTouch LCD menu from Main to Main/Control	2017-05-09 09:49:02 -04:00
Florian Heilmann	fe96376a73	Fix FWRetract with positive z-moves during retracted state	2017-05-09 13:54:57 +02:00
Scott Lahteine	47cae2929f	Patch platformio.ini to fix build error in DevIoT ... For compatibility with DevIoT, until that can be solved.	2017-05-08 20:27:14 -05:00
Scott Lahteine	911a87e006	Disable SCARA feedrate scaling by default	2017-05-08 14:41:03 -05:00
Scott Lahteine	71396f77d3	Cleanups following recent commits	2017-05-08 14:23:01 -05:00
Scott Lahteine	dca48f0e63	Move platformio.ini back to Marlin folder - it works there	2017-05-08 14:23:01 -05:00
Scott Lahteine	a6dafb058e	Small reduction in error code size	2017-05-08 13:58:09 -05:00
Scott Lahteine	a1e04942a2	Cleanup to software PWM variables	2017-05-08 13:51:45 -05:00
Thomas Moore	a20d0794e6	Automatically define Z_MIN_PROBE_ENDSTOP_INVERTING for BLTouch	2017-05-08 16:28:44 +00:00
Thomas Moore	3279337f47	Move BLTouch LCD menu from Main to Main/Control	2017-05-08 15:21:01 +00:00
Brian	6cb0fa4128	Cleanup previous implementation of new quiet probing ... Saves a few lines of code.	2017-05-08 08:13:46 -04:00
bgort	4b7f8ad9c6	Merge pull request #6610 from bgort/pio-improvements2 ... PlatformIO-related changes	2017-05-08 07:52:42 -04:00
Scott Lahteine	56ca47ab9d	Patch configuration temp units	2017-05-07 21:32:01 -05:00
Scott Lahteine	421dd62800	Adjust spacing of "spaces"	2017-05-07 21:28:54 -05:00
Scott Lahteine	26dba44cd3	Patch redundant lcd settings	2017-05-07 21:28:54 -05:00
Scott Lahteine	34b5041576	Spacing adjustment, ubl_G29	2017-05-07 21:28:54 -05:00
Scott Lahteine	1c4ed8b106	Note 5 extruders in config comments	2017-05-07 21:28:54 -05:00
Scott Lahteine	6e4a5cc8c6	Patch missing const in temp_abs	2017-05-07 21:13:44 -05:00
bgort	d35e2fda10	Merge pull request #6622 from bgort/silentprobing ... Improve BLTOUCH_HEATERS_OFF functionality	2017-05-07 21:33:44 -04:00
Scott Lahteine	6ed52fb765	Adjust spacing in LSF	2017-05-07 19:11:52 -05:00
Roxy-3D	110afff415	More misc UBL fixes and update gMax examples (#6632) ... I think I forgot to Sync before I committed last time. Some UBL changes did not stick. Also, update the gMax configuaration.h file so other than unique numbers and settings, it exactly matches the default configuration.h file.	2017-05-07 19:02:24 -05:00
Roxy-3D	d92fa40c62	misc. UBL fixes (#6631) ... * Restore LSF functionality Some of the typo's persisted... Hopefully this gets them all fixed. * Restore user's expectations of how G28 should behave * Allow Nozzle size control with ornery host programs	2017-05-07 18:23:48 -05:00
Brian	faa270071d	Improve BLTOUCH_HEATERS_OFF functionality ... - rename to PROBING_HEATERS_OFF - move heater pausing functionality into thermalManager - add variables, pause(), ispaused(), other functions - add fan pausing functionality -> PROBING_FANS_OFF - add probing_pause() wrapper - move pausing into do_homing_move() and do_probe_move() to minimize quiet time and so other probe types can benefit - example configs	2017-05-07 16:22:08 -04:00
lrpirlet	d66e9efac5	G29 P1 stops reporting Invalid location with this patch	2017-05-07 15:07:26 +02:00
Scott Lahteine	ce507deb9f	Support temperature units in M503	2017-05-06 20:24:51 -05:00
bgort	a59066bca9	Various improvements - mostly UBL-related (#6607) ... UBL Clean up.	2017-05-06 18:59:16 -05:00
Brian	0446dd3ad8	PlatformIO-related changes ... - move platformio.ini out of source directory to be more consistent with 'normal' PlatformIO usage - facilitates IDE integration - add related .gitignores	2017-05-06 06:22:10 -04:00
Scott Lahteine	77769e284f	Edit configuration comments	2017-05-05 13:32:31 -05:00
Scott Lahteine	6876e79d42	Tweak command index increment	2017-05-05 13:32:31 -05:00
Scott Lahteine	7fcb5c1424	Minor fix in K8200 readme	2017-05-05 11:25:11 -05:00
Max Matveev	267f3a03d9	Fixed USE_CONTROLLER_FAN #define usage	2017-05-04 23:38:29 +02:00
bgort	ae7c602031	fix error in M105 output -- use SERIAL_PROTOCOL for ints instead of SERIAL_PROTOCOL_F (#6584) ... also removed wayward 'address of' ampersand in setTargetHotend and setTargetBed parameters	2017-05-04 16:09:45 -05:00
Scott Lahteine	3cd9af2409	bugfix-1.1.x ReadMe, Version, helper scripts	2017-05-04 07:17:10 -05:00
Florian Heilmann	15268770f5	Fix broken fwretract recovery extruder feedrate ... When both lowering and recovery are performed using the same "prepare_move_to_destination()" the extruder recovery feedrate ends up being ignored and, instead, is only capped by either the maximum e-speed or the time it takes to perform the z-lowering. Performing the two moves separately from each other ensures a correct recovery feedrate.	2017-05-04 11:34:28 +02:00
Scott Lahteine	58210c3a19	Merge pull request #6568 from thinkyhead/rc_bilinear_extension ... Add EXTRAPOLATE_BEYOND_GRID option to bilinear leveling	2017-05-04 00:46:05 -05:00
Scott Lahteine	da08e11acd	Add EXTRAPOLATE_BEYOND_GRID option to bilinear leveling	2017-05-04 00:19:07 -05:00
Scott Lahteine	6834e36871	Merge pull request #6567 from thinkyhead/rc_sdcard_stop ... Shutdown heaters, autotemp on SD Cancel	2017-05-03 23:54:29 -05:00
Scott Lahteine	399efd66ed	Click to resume	2017-05-03 22:26:06 -05:00
Scott Lahteine	1196e3ca59	SDCard print completion can use "M0"	2017-05-03 22:24:03 -05:00
Scott Lahteine	6854f08d22	Shut down autotemp in disable_all_heaters	2017-05-03 20:54:26 -05:00
Thomas Moore	acec237092	Shutdown heaters and fan after canceling a print from the SD card	2017-05-03 20:43:09 -05:00
Scott Lahteine	11b6a3cbb6	Fix regression in least_squares_fit.cpp	2017-05-03 19:21:44 -05:00
Scott Lahteine	e1b85ff67b	Merge pull request #6559 from thinkyhead/rc_more_optimal ... Compact smart_fill_mesh slightly	2017-05-03 19:07:36 -05:00
Scott Lahteine	9890141f7b	M100 tweak	2017-05-03 17:28:09 -05:00
Scott Lahteine	2658cc707a	Treat temperature as integer, when possible	2017-05-03 17:27:25 -05:00
Scott Lahteine	1b2c7ec20a	Make G26 compatible with inches and thermal unit modes	2017-05-03 17:12:48 -05:00
Scott Lahteine	241bdffe65	Dress up Bilinear Leveling code	2017-05-03 17:12:35 -05:00
Scott Lahteine	67ecf06cc4	Patch issue in gcode_M900 ... Noted in #6550	2017-05-03 15:26:00 -05:00
Scott Lahteine	de5e485ed7	Explicit upward angle solution	2017-05-03 01:19:44 -05:00
Scott Lahteine	ecdf68735f	Compact smart_fill_mesh slightly	2017-05-03 01:06:58 -05:00
Scott Lahteine	628391304f	Merge pull request #6552 from thinkyhead/rc_more_ubl_cleanup ... Further cleanup of UBL	2017-05-02 22:46:04 -05:00
Scott Lahteine	902fe76db9	Merge pull request #6556 from thinkyhead/rc_use_controller_fan ... Implement USE_CONTROLLER_FAN as a feature	2017-05-02 22:43:26 -05:00
Scott Lahteine	7ba7474a73	Drop extra parens from address-of operator	2017-05-02 22:22:23 -05:00
Scott Lahteine	0bf5add075	Use UBL_MESH_(MIN|MAX)_[XY] for G29 move limits	2017-05-02 22:22:23 -05:00
Scott Lahteine	b8ba3b7647	Use 'sq' macro where possible	2017-05-02 22:22:23 -05:00
Scott Lahteine	66eba3346b	Remove G29 lcd control debugging	2017-05-02 22:22:23 -05:00
Scott Lahteine	3517154135	Reduce code size, fix bug in smart_fill_mesh	2017-05-02 22:22:23 -05:00
Scott Lahteine	c4e34adcf1	Apply formatting, coding standards to UBL	2017-05-02 22:22:23 -05:00
Scott Lahteine	f4239e62b1	Merge pull request #6557 from thinkyhead/rc_hotend_status_item ... Keep refreshing LCD if hotend status is on-screen	2017-05-02 22:04:21 -05:00
Scott Lahteine	fc857c5b78	Merge pull request #6549 from thinkyhead/rc_bltouch_refix ... Fix BLTOUCH_HEATERS_OFF bug	2017-05-02 21:53:09 -05:00
Thomas Moore	b39f634252	Continuously update LCD when hotend status is displayed in Filament Change screens	2017-05-02 21:49:40 -05:00
Scott Lahteine	2c13922c46	Implement USE_CONTROLLER_FAN as a feature	2017-05-02 20:18:52 -05:00
Scott Lahteine	492bc536bf	Modify debug methods to take PSTR	2017-05-02 17:53:40 -05:00
Bob-the-Kuhn	e5a27d9f36	G29 P2 & P4 bug fixes & improvements	2017-05-02 17:53:40 -05:00
Scott Lahteine	b93be716cf	Remove trailing whitespace	2017-05-02 17:53:40 -05:00
Scott Lahteine	76eca9732d	Fix mis-named language string define in Dutch	2017-05-02 16:08:09 -05:00
Scott Lahteine	806f670092	Merge pull request #6511 from Bob-the-Kuhn/UBL--G26-minor-improvements ... UBL: G26 minor improvements	2017-05-02 16:06:22 -05:00
Scott Lahteine	0803c9d997	Merge pull request #6533 from thinkyhead/rc_autocal_patches ... General cleanup of G33	2017-05-02 16:01:02 -05:00
Brian	ff5fed137f	Fix BLTOUCH_HEATERS_OFF bug	2017-05-02 15:53:52 -05:00
Scott Lahteine	ca1dd739a3	Organize ubl.h defines by the files they serve	2017-05-02 15:47:06 -05:00
Scott Lahteine	0449f69179	Cleanup patch to recent merge	2017-05-02 15:47:06 -05:00
LVD-AC	da2abad636	Various cleanups of G33 ... - update comment section - redefined P5 grid - minor clean to probe radius routine - updated EEPROM version to V37 according remark in #6517	2017-05-02 15:47:06 -05:00
Bob-the-Kuhn	7ce613db0a	Fix Conditionals test for endstop plug used by Z2 or probe.	2017-05-02 15:41:47 -05:00
Scott Lahteine	ef750ae86b	Towards supporting Z2 in Endstops::report_state	2017-05-02 15:39:32 -05:00
Scott Lahteine	c03c623951	Sanity-check Z2 endstop assigned to a nonexistent pin.	2017-05-02 15:39:00 -05:00
Scott Lahteine	70f31b6c76	Throw an error if no E stepper is free for X2, Y2, Z2	2017-05-02 15:13:47 -05:00
Scott Lahteine	ac69eca586	Merge pull request #6538 from bgort/ubl_gridlbls ... Fix, cleanup, prettify `G29 O` output	2017-05-02 14:09:18 -05:00
Scott Lahteine	99b11db1a1	Merge pull request #6537 from thinkyhead/rc_cleanup_sunday ... Various leveling-related patches	2017-05-02 00:59:59 -05:00
Roxy-3D	41e63bbb7c	Fix Horizontal and Vertical UBL optimization bug. (#6540) ... * Fix Horizontal and Vertical optimization bug. And drastically reduce the debug code foot print.... * Yeah Baby! The debug print is going A - OK !	2017-05-01 23:52:33 -05:00
Scott Lahteine	e79b335367	Patches for leveling reactivation in G28 / M48	2017-05-01 17:38:57 -05:00
Brian	92e22c3bf2	Fix, cleanup, prettify G29 O output	2017-05-01 18:19:57 -04:00
Scott Lahteine	7d5cd7e0d7	Tweak set_bed_leveling_enabled	2017-05-01 16:46:52 -05:00
Scott Lahteine	ed81e9b3d3	Adjust leveling conditionals	2017-05-01 16:46:48 -05:00
Scott Lahteine	a64e5659ce	Clean up G26 external references, private vars	2017-05-01 15:17:52 -05:00
Scott Lahteine	2887c20788	Add a function to home all axes (i.e., gcode_G28)	2017-05-01 15:03:37 -05:00
Scott Lahteine	8f895d5e01	Merge pull request #6530 from thinkyhead/rc_cleanups_2 ... Fixes for DUAL_NOZZLE_DUPLICATION_MODE	2017-05-01 12:34:11 -05:00
Scott Lahteine	8002672938	Fixes for DUAL_NOZZLE_DUPLICATION_MODE	2017-05-01 12:20:25 -05:00
Scott Lahteine	f69acde966	Merge pull request #6528 from MarlinFirmware/revert-6416-negative-mesh-fix ... Revert "Fix for Meshpositions if printer has negative endstop positions"	2017-05-01 11:51:13 -05:00
Scott Lahteine	4803a4322e	Revert "Fix for Meshpositions if printer has negative endstop positions"	2017-05-01 11:25:07 -05:00
Scott Lahteine	4f74c416a4	Patch for BLTOUCH_HEATERS_OFF	2017-05-01 11:13:40 -05:00
Scott Lahteine	1823a6ea29	Patch for missing DELTA_HEIGHT	2017-05-01 11:05:35 -05:00
Scott Lahteine	d814e468d2	Fix set_heaters_for_bltouch and usage ... - Only call `set_heaters_for_bltouch` when actually deploying/stowing - Clear `next_emi_protection` when re-enabling heaters	2017-05-01 02:27:52 -05:00
Brian	4e1448e75a	Various fixes for compiler warnings ... add BLTouch-related messages in english and (rusty) french; add missing endstops.h in ultralcd.cpp; fix misc. compiler warnings; fix lsf_reset - ZERO macro can't handle a pointer as it would only memset the size of the pointer, not the size of the entire struct	2017-05-01 02:12:40 -05:00
Scott Lahteine	fc9919b749	Merge pull request #6515 from thinkyhead/rc_cleanup_sunday ... Some minor cleanups to code formatting	2017-04-30 22:58:16 -05:00
Scott Lahteine	c12bc51a59	cardreader.cpp spacing tweak	2017-04-30 22:27:47 -05:00
Scott Lahteine	46b714a52f	Cleanup spacing in pinsDebug.h	2017-04-30 22:27:26 -05:00
Scott Lahteine	88141ca717	Remove things that aren't pins from pinsDebug_list.h	2017-04-30 22:24:51 -05:00
Scott Lahteine	ff35b11d08	Resolve compiler complaint about memset volatile *	2017-04-30 22:24:03 -05:00
Scott Lahteine	0b421e97c9	Rename some (unused) OMCA pins	2017-04-30 22:16:44 -05:00
Scott Lahteine	c2c9f01c8e	Patch newly-introduced bug in IS_Z2_OR_PROBE	2017-04-30 20:17:10 -05:00
Scott Lahteine	819df5e06d	Cleanups to pins debugging	2017-04-30 20:17:10 -05:00
Scott Lahteine	42824b0e1f	Use new serial spacing function to save PROGMEM	2017-04-30 20:14:42 -05:00
Scott Lahteine	cd72901fb7	Cleanups to UBL code	2017-04-30 20:14:42 -05:00
Bob-the-Kuhn	ce87c7803e	implement G26 changes per review	2017-04-30 19:05:25 -05:00
jaysonkelly	769817ce5e	Need to define this for Rigidboard V2 ... Motor current defaults need to be defined for Rigidboard	2017-04-30 19:04:27 -05:00
Scott Lahteine	39c6c5621b	Merge pull request #6416 from SkyNet3D/negative-mesh-fix ... Fix for Meshpositions if printer has negative endstop positions	2017-04-30 17:38:41 -05:00
Scott Lahteine	671a44b8aa	Merge pull request #6410 from teemuatlut/LVD-Delta ... Delta auto-calibration updates	2017-04-30 16:39:51 -05:00
Scott Lahteine	5d5c9a040a	Merge pull request #6509 from thinkyhead/rc_config_patches ... Configuration cleanup	2017-04-30 16:10:27 -05:00
Scott Lahteine	d480b6f75a	Enable E1 stepper for DUAL_NOZZLE_DUPLICATION_MODE	2017-04-30 16:01:01 -05:00
Bob-the-Kuhn	dcde202157	Add startup notice & update host temperatures while waiting ... Right now G26 doesn't send a notice to the host that it's running. It's not until the heaters are at temperature that you know for sure if it's running or not. Added host temperature prints so that someone watching the host interface will see the temperatures change during the warm up period. Updates are sent every 5 seconds.	2017-04-30 15:51:58 -05:00
Scott Lahteine	54751e8557	Put DISTINCT_E_FACTORS adjacent to the affected settings	2017-04-30 15:30:31 -05:00
Scott Lahteine	0dbe4b3e54	Edit configurations to reduce verbosity, arrange logically	2017-04-30 15:30:31 -05:00
Scott Lahteine	0750933bc6	Merge pull request #6490 from Bob-the-Kuhn/Missing-X-stop ... Endstop not enabled if pin is zero	2017-04-30 15:09:36 -05:00
bgort	5ace3699b1	Output (commented) coordinates on G29 S-1; helps identify the x/y points that correspond with i/j coordinates, which eases manual tweaking of z values (#6507)	2017-04-30 14:59:34 -05:00
Scott Lahteine	d7d4378481	Remove inaccurate version description	2017-04-30 14:57:19 -05:00
Scott Lahteine	f169c04604	Merge pull request #6491 from thinkyhead/rc_cleanup_wednesday ... Various cleanups for recent merges	2017-04-30 14:56:48 -05:00
Scott Lahteine	6d63255ddc	Merge pull request #6508 from bgort/pio_improvements ... PlatformIO-related improvement	2017-04-30 14:53:22 -05:00
LVD-AC	cafc48dff8	little oops	2017-04-30 22:17:49 +03:00
Brian	627730948d	Add U8glib as a dependency to platformio.ini for those who use PlatformIO; this makes compiling even easier as u8glib will be downloaded and included automatically. ... Also added the new .pio-related directory to .gitignore, and a few ignores for those who use cmake.	2017-04-30 15:13:51 -04:00
bgort	5974d8e168	change G26 default nozzle size to 0.4, consistent with instructions (#6506)	2017-04-30 13:23:46 -05:00
LVD-AC	471a321624	leaner code for probe routine	2017-04-30 19:15:16 +03:00
bgort	3c0d5ba0a1	allow idle() to be called - fixes sometimes crash/hang in G29 I; (#6505)	2017-04-30 10:22:31 -05:00
Roxy-3D	2509587b5a	Correct over optimization of pre-initialized variables (#6500) ... * Correct over optimization of pre-initialized variables NEAR_ZERO() works most of the time... But it leaves corner cases uncovered. We need to explicitly check if these variables are +/- infinity. * Correct over optimization of pre-initialized variables	2017-04-29 22:01:29 -05:00
LVD-AC	585c00a728	Proposed changes ... This is what I did yesterday: - basicly gave the tests more comprehensive names; put all the declarations at the top; got rid of the magic negative C-value (renamed to P + A, O, T) - "cos(RADIANS(180 + 30 * axis)) * (1 + circles * 0.1 * ((zig_zag) ? 1 : -1)) * delta_calibration_radius" compiles wrong is zig_zag statement is without brackets - DELTA_TOWER_ANGLE_TRIM reset to 3 values (the calcs use the 3th value to normalize will not compile otherwise) -Wrote 3 dummies to keep EEPROM lenght the same -Reset the configs to the 'original' with autocal + menu disabled (but can be enabled of course)	2017-04-29 18:53:14 +03:00
Scott Lahteine	29fa241617	Initial patches to G33	2017-04-29 15:29:49 +03:00
Scott Lahteine	12ce051b55	Add a function to output spaces to serial	2017-04-29 15:29:49 +03:00
Scott Lahteine	42f4c53254	Starting on G33 rewrite	2017-04-29 15:29:49 +03:00
Scott Lahteine	baf3b91460	DELTA_TOWER_ANGLE_TRIM only needs AB	2017-04-29 15:29:49 +03:00
emartinez167	27cd165adf	Last three Spanish language strings ... Updates as per @thinkyhead request.	2017-04-29 11:33:30 +08:00
Scott Lahteine	2cc9774f34	Apply bltouch_menu ... As proffered in #6252	2017-04-28 18:43:03 -05:00
Scott Lahteine	1a111180de	Clean up set_heaters_for_bltouch	2017-04-28 18:32:39 -05:00
Scott Lahteine	7db805930a	Cleanup configurations	2017-04-28 18:32:39 -05:00
Scott Lahteine	8bf3a3fcdb	Remove inaccurate comments from ubl.h	2017-04-28 18:32:38 -05:00
Scott Lahteine	47557d5a19	Fix up formatting in ubl.h	2017-04-28 18:32:38 -05:00
Scott Lahteine	0a8e09c723	Clean up excess whitespace, comment formatting	2017-04-28 18:32:38 -05:00
Scott Lahteine	a35c681453	Clean up least_squares_fit	2017-04-28 17:33:28 -05:00
Bob-the-Kuhn	40089249c3	add PIN_EXISTS to HAS_xyz_MIN macro	2017-04-28 16:47:59 -05:00
Scott Lahteine	8020069371	Apply coding standards for indentation	2017-04-28 15:43:06 -05:00
Scott Lahteine	dabca83742	Merge pull request #6437 from Kaibob2/patch-1 ... Update language_de.h	2017-04-28 14:47:47 -05:00
Kai	3d0a4c4ea9	Update language_de.h	2017-04-28 21:09:10 +02:00
Silvio	6bf1d50188	Added missing translations (#6458)	2017-04-28 13:49:16 -05:00
Mehmet Sutas	404f767d44	Update language_tr.h (#6463)	2017-04-28 13:48:31 -05:00
Petr Zahradnik	5e701524f8	Update language_cz.h for new translations (#6465) ... * Update language_cz.h for new translations * Correction translate * Revert correction back to hotend	2017-04-28 13:47:43 -05:00
gege2b	0a92ce7a98	Completed french translation (#6475)	2017-04-28 13:46:09 -05:00
Ernesto Martinez	ff4fb42e7d	Add new strings as per recent changes in RCBugFix (#6482) ... Adding missing strings to Spanish language, as per changes recently done to the RCBugFix branch.	2017-04-28 13:45:22 -05:00
paulusjacobus	67d1fc5556	Update language_nl.h (#6478) ... updated the RCbugfix release with additional Dutch translations	2017-04-28 13:42:39 -05:00
benlye	8c6b4537a6	Fix issue in itostr4sign with numbers <100 (#6487) ... The first character in the string wasn't blanked if the number went from >= 100 to <100, resulting in artefacts in the displayed string.	2017-04-28 13:35:11 -05:00
LVD-AC	4ea8d0f89b	Solved "The Travis CI build failed "	2017-04-28 19:55:21 +03:00
LVD-AC	ed6b361e27	cleanup ready to squash	2017-04-28 18:09:18 +03:00
LVD-AC	7a6a1ef583	M666 normalize positive values to <=0 ... M666 + tower radians absolute value	2017-04-28 18:05:24 +03:00
Roxy-3D	4075b95519	Allow BL-Touch users to control heaters during probe event (#6485) ... The Configuration.h file entries for BL-Touch have been updated to: ```cpp //#define BLTOUCH //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event ```	2017-04-28 09:19:55 -05:00
Roxy-3D	6e8ecb908a	Shut down heaters during BL-Touch probe event ... The electro-magnetic interference from the bed and nozzle are affecting the BL-Touch repeatability for some users. This problem can be helped by shutting down the heaters during the actual probe event and then quickly turning them back on. Because this code is messing with the heaters, it is written in a paranoid manner. It only turns the heaters back on if everything is EXACTLY as it expects things to be. The BL-Touch probe must have been put into a deployed state less than 20 seconds prior, or the stow() function will NOT turn the heaters on. This code has been tested and works for both G28 and probing functions.	2017-04-27 18:52:58 -05:00
LVD-AC	d8102aeca8	Cn negative : no tower angle calibration ... Giving a negative number of probe points disables the tower angle correction calibration ('4point' instead of '7point' solution) EEPROM version updated	2017-04-27 21:13:07 +03:00
Roxy-3D	3601f08e87	Better tuned FolgerTech i3-2020 example file	2017-04-27 11:16:38 -05:00
Roxy-3D	a20b7d9581	Better tuned Example file for FolgerTech i3-2020 ... Also setting up Z-Probe on the machine.	2017-04-27 11:16:38 -05:00
Kai	bf2fe46062	Update language_de.h	2017-04-27 10:13:02 +02:00
Kai	11d34be060	Update language_de.h	2017-04-27 10:06:26 +02:00
Scott Lahteine	817ecb9ff4	Merge pull request #6453 from thinkyhead/rc_cleanup_wednesday ... Minor cleanups, work-in-progress	2017-04-26 19:41:52 -05:00
Roxy-3D	22f6e277af	Get example files fully into compliance ... Change to support new name GRID_MAX_POINTS_XY Start UBL at version 1.0 in the CUSTOM_MACHINE_NAME	2017-04-26 16:22:17 -05:00
LVD-AC	a9bc1d30cc	z_offset change ... Avoids to have to recalibrate the delta_height after a z_offset change	2017-04-26 21:57:11 +03:00
Roxy-3D	ec26e23e7e	Add my two 'Nice' machines as example configurations ... These are my two 'Nice' machines. Both are good example machines. The FolgerTech i3-2020 is probably the best value kit on the market right now. And it has developed a 'Cult Following' of hobbiests. I'll always have an up to date Configuration.h file set for it, so it may as well be an example configuration. And the gCreate gMax 1.5+ is the best printer I've ever seen that runs Marlin. For sure, I'll always have up to the minute Configuration.h files for this printer also. I've moved over to using the gMax as my primary development machine for Marlin. So... Besides being a good machine, it is a nice convienience for me to have this Configuration.h file as an 'Example'.	2017-04-26 12:46:12 -05:00
Scott Lahteine	adb8e68592	Fix stuck "Print Aborted" LCD message ... Fixes #6393	2017-04-26 06:24:23 -05:00
Scott Lahteine	096b927102	Minor optimization of FILAMENT_WIDTH_SENSOR	2017-04-26 06:24:23 -05:00
Scott Lahteine	5bdb0b567d	Cosmetic patches	2017-04-26 06:24:23 -05:00
Kai	38ae7f4238	Added more translation strings ... There are some quite tricky ones which are hardly translateable. Maybe @Sebastianv650 can review this	2017-04-26 11:58:11 +02:00
Scott Lahteine	4d96d3eab1	Bootscreen delay after clear, then set chars ... Fixes #6426	2017-04-25 23:37:28 -05:00
Scott Lahteine	5512130d6c	Only set Compare Mode for channel A ... Fixes #6445	2017-04-25 23:14:16 -05:00
Roxy-3D	d467e97679	Smart-Fill and Mesh-Tilting (both 3-point and grid) working! ... Also... The memory corruption issue may be fixed. The GCC compiler was inlining static functions and this caused the G29() stack frame to become much larger than the AVR could handle.	2017-04-25 21:03:41 -05:00
Scott Lahteine	a699967ec8	Merge pull request #6443 from thinkyhead/rc_interrupt_fastio ... Patch fastio.h with Timer 2 interrupt support	2017-04-24 20:09:41 -05:00
Scott Lahteine	2823bf0874	Update fastio.h with special handling for Timer 2	2017-04-24 16:58:22 -05:00
Scott Lahteine	fd535e111a	Fix up XYZ_CONSTS_FROM_CONFIG macro	2017-04-24 14:05:11 -05:00
Kai	03c2f756b9	Update language_de.h	2017-04-24 13:32:16 +02:00
LVD-AC	dcf30a69d6	Allowing #define DELTA_TOWER_ANGLE_TRIM[C_AXIS] ... More consistent with M665 where C-value is allowed as well, then normalized	2017-04-23 14:51:24 +03:00
Brian	f41fb2b635	Numerous UBL-related changes: ... * relocated ubl state to config. store: * removed a number of ubl state variables and padding which were largely unused - saved 58 bytes of both SRAM and EEPROM; * modified ubl sanity_check - no longer checks removed state variables that were otherwise unused, where checking didn't seem to accomplish anything, ultimately; * removed pre_initialized state, saving 64 bytes of SRAM; * removed automatic saving of UBL state after UBL activation/deactivation; * consolidated multiple GRID_MAX_POINTS_X/Y to 'Global Leveling' section of EEPROM; * minor update to G29 Sx notes/instructions; * renamed mesh load and save parameter to 'slot' from 'm' for clarity;	2017-04-22 18:44:39 -05:00
Brian	f1a4758cef	use progmem instead of sram for mesh_index_to_x/ypos array; ... fix maximum mesh_index_ array size at 16 (15+1);	2017-04-22 18:34:49 -05:00
Scott Lahteine	87d240042a	Optimize number-to-string functions, no-fan display	2017-04-22 16:23:15 -05:00
Scott Lahteine	959566cf0a	Update note about M163 / M164	2017-04-22 16:23:15 -05:00
Scott Lahteine	830851df13	Spend some SRAM to optimize bilinear leveling	2017-04-22 16:19:31 -05:00
Scott Lahteine	091179d960	bed_level_grid => z_values (also *_virt array)	2017-04-22 16:19:31 -05:00
Scott Lahteine	23cdbbb2d3	Add a method to refresh bilinear bed level after a change	2017-04-22 16:19:30 -05:00
Scott Lahteine	ccda63c473	Drop the accessor form for LCD value editing	2017-04-22 16:19:30 -05:00
Scott Lahteine	10da175be5	Fix a pair of compiler complaints	2017-04-22 16:19:30 -05:00
Scott Lahteine	ff0018e287	Format hex values as uppercase	2017-04-21 21:42:41 -05:00
android444	77aa16005d	Polish font ... Add polish font for GLCD displays only. HD44780 work properly without polish character. Update language_pl.h.	2017-04-21 21:42:41 -05:00
teemuatlut	244f67590e	Delta probe height bug solved	2017-04-22 02:23:56 +03:00
Hans Raaf	406a83ff2d	Fix for Meshpositions if printer has negative endstop positions	2017-04-22 00:16:16 +02:00
benlye	3ed737425d	Fix typo in new SET_COM macro	2017-04-21 15:08:18 -05:00
Brian	88649b06a6	use planner.z_fade_height, etc. instead of private, ubl-specific g29 fade height	2017-04-21 09:09:09 -05:00
LVD-AC	004928148c	Tower angles ... Adding '7-point' tower angle correction calibration	2017-04-21 12:48:45 +03:00
LVD-AC	76ec7a0f80	Adding upto 7*7 probe grids ... - adding Cn 5, 6 and 7	2017-04-21 11:58:39 +03:00
LVD-AC	d4f593d200	Delete 'expert level' ... and getting rid off verbose level 3 and configuration_adv settings	2017-04-21 11:58:39 +03:00
LVD-AC	13c8493878	M665 rework and related issues (all delta's) ... - Making M665 compatible with repetier (see http://reprap.org/wiki/G_code#M665:_Set_delta_configuration) - M665 B also sets the radius for manual calibration menu - Converting tower ajustment definitions to arrays - tower angle corrections compatible with Esher 3D wizzard - Only tower angles need to be adjustable with M665 and stored to EEPROM - tower radius and diag rod can be adjusted in the FW only with #define	2017-04-21 11:58:39 +03:00
Scott Lahteine	e0e069c6d8	Clean up trailing whitespace	2017-04-20 17:52:07 -05:00
Scott Lahteine	9b94210394	Bring FLSUN config more up to date	2017-04-20 17:52:06 -05:00
Scott Lahteine	b0aa256bc0	Updates for all configs	2017-04-20 17:52:05 -05:00
Scott Lahteine	ee46ce1743	Add and apply interrupt helper macros	2017-04-20 16:04:29 -05:00
Scott Lahteine	6131c62499	General cleanup	2017-04-20 16:04:29 -05:00
benlye	2c86dfd3b5	Fix compiler type conversion errors after LCD changes	2017-04-20 16:04:29 -05:00
Scott Lahteine	55f9e76610	Merge pull request #6367 from thinkyhead/rc_cleanup_followup ... Cleanup after some direct commits	2017-04-20 15:13:24 -05:00
Scott Lahteine	d38a792a91	Merge pull request #6382 from MagoKimbra/fix_configuration_store ... Fix double definition in configuration_store	2017-04-20 15:06:58 -05:00
Scott Lahteine	b98bc034ae	Replace c_assert hack with static_assert	2017-04-19 13:07:35 -05:00
Scott Lahteine	5eb2b1a790	Clear up G29 compiler warnings	2017-04-19 13:07:35 -05:00
Scott Lahteine	4ce2a63db0	Apply const, spacing to Marlin_main.cpp	2017-04-19 13:07:34 -05:00
Scott Lahteine	e97f1284c1	Cleanup of pins testing code	2017-04-19 13:07:34 -05:00
Scott Lahteine	e9b53ae00c	Cleanup after some direct commits ... https://github.com/MarlinFirmware/Marlin/commit/5e9726530ff21d3bc62beaa6 ac1b9437c276130a	2017-04-19 13:07:34 -05:00
Scott Lahteine	e05d050a1e	Add hex routine to print an address	2017-04-19 13:07:34 -05:00
Scott Lahteine	4542282f5e	Fix broken TOGGLE macro in fastio.h	2017-04-19 12:38:13 -05:00
MagoKimbra	ed52275a14	Fix double definition in configuration_store	2017-04-18 17:57:40 +02:00
Scott Lahteine	de569e3d4e	Merge pull request #6327 from Bob-the-Kuhn/M43-toggle-&-Z-probe-fixes ... M43 Toggle & Z servo test - fix bug & add another check	2017-04-18 03:21:57 -05:00
Scott Lahteine	f33a650ecc	Merge pull request #6368 from thinkyhead/rc_linear_advance_eeprom ... Add Linear Advance values to EEPROM and LCD	2017-04-18 02:54:12 -05:00
Scott Lahteine	a00ae4790a	Replace M905 with unique code M900	2017-04-17 16:39:37 -05:00
Scott Lahteine	1286d9603d	Clean up and organize ultralcd.cpp	2017-04-17 16:39:36 -05:00
Scott Lahteine	3cdf78a79f	MSG_VOLUMETRIC => MSG_FILAMENT	2017-04-17 16:39:36 -05:00
Thomas Moore	f8e77d6545	Add Linear Advance values to EEPROM and enable configuration of K via LCD	2017-04-17 16:39:36 -05:00
Scott Lahteine	eb2d073dae	Add M905 R for setting the E/D ratio directly	2017-04-17 16:39:36 -05:00
Scott Lahteine	69dfa54a84	Use code_value_linear_units for known-linear axes	2017-04-17 16:39:36 -05:00
Scott Lahteine	b956f2642b	Show M503 report with current linear units	2017-04-17 16:39:36 -05:00
Scott Lahteine	ba4a005ceb	Merge pull request #6373 from mtowara/mt_makefile_fix ... Fix Makefile build	2017-04-17 16:16:37 -05:00
towara	150b15c311	fix compiler errors generated by more stringent flags in Makefile: ... - use volatile for registers - avoid implicit casts	2017-04-17 11:59:47 +02:00
towara	f6095c9325	fix missing serial.cpp in Makefile	2017-04-17 11:59:03 +02:00
Scott Lahteine	871f92378c	Tweak headings in EEPROM structure	2017-04-16 18:42:33 -05:00
Scott Lahteine	bf2548be4a	Merge pull request #6362 from tcm0116/babystepping ... Only queue babysteps if axis is in a known position	2017-04-16 17:46:06 -05:00
dot-bob	9c410ddf68	Fixed an issue where a display with a hardware reset pin (LCD_RESET) may not get initialized properly.	2017-04-15 22:45:15 -06:00
Thomas Moore	72a7fac461	Only queue babysteps if axis is in a known position	2017-04-15 23:19:43 -05:00
Roxy-3D	5e9726530f	Setup to find data corruption and general clean up ... This data corruption problem is very difficult. Just changing the code a little bit changes whether the problem even happens and what is affected. I need these changes in the main branch so I can operate with the extra debug code always available and turned on. Everything is setup such that if M100 is turned off or DEBUG(ECHO) is turned off, the code is not affected. M100 has been made a little bit more inteligent so it can display the serial command buffers in a more meaningful way (because the data corruption seems to often times end up in that area).	2017-04-15 19:26:43 -05:00
Scott Lahteine	e519e95953	Merge pull request #6358 from thinkyhead/rc_doubleclick_fix ... Show Cancel/Continue screen for ABL "Level Bed"	2017-04-15 17:25:37 -05:00
Scott Lahteine	a81606c680	Show Cancel/Continue screen for ABL "Level Bed"	2017-04-15 16:51:03 -05:00
Scott Lahteine	51021bc7b8	Merge pull request #6353 from thinkyhead/rc_endstop_coolness ... Clean up endstop triggering code	2017-04-15 16:49:54 -05:00
Scott Lahteine	857dec0990	Merge pull request #6342 from benlye/benlye-fix-softspi ... Fix softspi variant conditional for 1284p	2017-04-15 16:33:50 -05:00
Scott Lahteine	4e04383d18	Merge pull request #6354 from thinkyhead/rc_doubleclick_fix ... Fix undefined symbol if DOUBLECLICK_FOR_Z_BABYSTEPPING and HAS_BED_PROBE defined	2017-04-15 16:06:29 -05:00
Thomas Moore	8dd0492e68	Show lcd_babystep_zoffset screen if DOUBLECLICK_FOR_Z_BABYSTEPPING is enabled and HAS_BED_PROBE is defined	2017-04-15 14:44:50 -05:00
benlye	0a2f60fab4	Make spi.h inclusion conditional ... spi.h is only needed if HEATER_0_USES_MAX6675 is defined, so making its inclusion conditional on HEATER_0_USES_MAX6675 being defined.	2017-04-15 16:22:42 +01:00
Bob-the-Kuhn	60471b7592	minor improvements ... Configuration_store.cpp - changed a couple of print statements so the values were printed. The old method resulted in the formula being printed. ubl_G29 1) added support for R option to P4. Now probes all points unless R is present and the number is greater than 0. 2) P2 - moved map print statement so it showed the point that was currently being probed, The old location did this only for the first point. 3) P4 - Moved the map print for the same reason. ultralcd.cpp - changed "Mesh Editor :" to "Mesh Editor" because the LCD draw routine puts a ":" in automatically so you end up with an extra ":" using the old message.	2017-04-15 09:31:55 -05:00
Scott Lahteine	25a61e9061	Improve motion-based endstop triggering code	2017-04-15 06:16:50 -05:00
Scott Lahteine	a2356c2825	Fix compiler warning about z-offset callback	2017-04-15 02:50:27 -05:00
Scott Lahteine	037c964d26	Reverse bools on prepare_move sub-functions	2017-04-15 01:08:19 -05:00
Scott Lahteine	d9c4333806	Extra logging of Dual X modes	2017-04-15 01:08:19 -05:00
Scott Lahteine	4067d15c92	Cleanup, extend TMC2130 implementation	2017-04-14 23:00:00 -05:00
Scott Lahteine	d60c02c5b1	Cleanup, extend TMC2130 configuration	2017-04-14 22:43:56 -05:00
Scott Lahteine	0e97b3d6d0	Fix some configuration spacing	2017-04-14 22:36:10 -05:00
Scott Lahteine	cf6f483378	Merge pull request #6187 from thinkyhead/rc_flsun_delta_autocal ... Delta: DELTA_HEIGHT, G33 Auto-Calibrate, drop M206/M428, add M665 H	2017-04-14 22:32:12 -05:00
Scott Lahteine	24882adfbf	Allow NO_WORKSPACE_OFFSETS with DELTA_AUTO_CALIBRATION ... - On `DELTA` the `M665 H` option supplants `M206` - On `DELTA` `NO_WORKSPACE_OFFSETS` only reverts `G92` behavior - Spawn 4 conditionals based on `NO_WORKSPACE_OFFSETS` - Optimize coordinate space conversion for `DELTA` workspace - To keep EEPROM version, retain `home_offset[XYZ]`, just ignore XY	2017-04-14 21:56:49 -05:00
Bob-the-Kuhn	1acb84ba02	fix 1 bug, add error messages ... =============================================== make changes requested by reviewers =============================================== add M43 test to Travis, fix EOL, remove trailing spaces	2017-04-14 20:57:45 -05:00
LVD-AC	8821963873	Implement delta auto-calibration and delta_height	2017-04-14 19:46:31 -05:00
Scott Lahteine	b305699046	Merge pull request #6341 from benlye/benlye-lcd_babystep_zoffset ... Fix lcd_babystep_zoffset()	2017-04-14 19:11:46 -05:00
LVD-AC	03bda24d19	Add delta auto-calibration and configuration for Flsun AC	2017-04-14 19:08:14 -05:00
Scott Lahteine	1bd25fd2b3	Clean up config spacing, section headings, etc.	2017-04-14 19:06:31 -05:00
Scott Lahteine	153b0ae967	Tweak Delta Printer configuration note	2017-04-14 19:06:06 -05:00
Scott Lahteine	81ffd98dd9	Allow faux leveling	2017-04-14 19:06:06 -05:00
Scott Lahteine	2355d87e11	Merge pull request #6346 from thinkyhead/rc_broken_abl_test ... Add support for SOLENOID_PROBE	2017-04-14 18:36:32 -05:00
Scott Lahteine	f4685c28b7	Reorder Conditionals_post.h and add comments	2017-04-14 18:18:21 -05:00
Scott Lahteine	0ac2b5c045	Additional 5 extruders support (solenoids, microstepping)	2017-04-14 18:18:20 -05:00
Scott Lahteine	fd2a0784ba	Add support for SOLENOID_PROBE	2017-04-14 17:24:36 -05:00
Scott Lahteine	5803ba43a9	Expose EXT_SOLENOID as an advanced option	2017-04-14 17:24:36 -05:00
Scott Lahteine	ea734f910b	Use direct pin manipulation whenever possible	2017-04-14 16:55:35 -05:00
Scott Lahteine	19d0c6a0c0	Patch to init W with RGBW_LED	2017-04-14 16:55:23 -05:00
Scott Lahteine	3e079660b0	Never define SLED_PIN	2017-04-14 16:36:32 -05:00
benlye	1a447d0047	Fix variant conditional for 1284p	2017-04-14 18:46:09 +01:00
benlye	1f9ee42750	Fix lcd_babystep_zoffset() ... Resolve 'steps_to_mm was not declared in this scope' compilation error after recent changes to merge babystepping with M851	2017-04-14 18:38:35 +01:00
Bob-the-Kuhn	445d39e95a	CORExx endstop detection fixes ... 1. The CORExx printers were checking more endstop axis than needed. 2. Removed all the CORE_xx_NOT logic. The motor_direction(xx) routine always returns the correct data so it is not needed. It was actually cause the wrong direction to be checked in some cases. 3. Made the logic/defines for X, Y & Z axis all the same. The old logic checked inappropriate configurations for Y and didn't check all the correct configurations on Z. 4. Added a check for zero steps before the X, Y & Z axis. Previously would check the they axis even if there were no movement.	2017-04-13 21:43:37 -05:00
Roxy-3D	28fec61f92	M100 Fixes and Features ... All the memory accesses need to be unsigned char in order to avoid false errors being detected. Two new features are available for developers to call into the M100 functionality to look for data corruption.	2017-04-13 18:20:53 -05:00
Scott Lahteine	52c3ace102	Add BABYSTEP_ZPROBE_OFFSET as an optional feature	2017-04-13 16:29:43 -05:00
Scott Lahteine	cd4e6abec8	Group BABYSTEPPING options together	2017-04-13 16:26:45 -05:00
Scott Lahteine	60ac41a32c	Add code to handle changes to zprobe_zoffset	2017-04-13 15:46:35 -05:00
Scott Lahteine	8fa4209916	Movement/adjustment should be reverse of probe offset change	2017-04-13 15:46:05 -05:00
Thomas Moore	361655828f	Use babystepping to adjust bed probe z-offset	2017-04-13 15:46:05 -05:00
Scott Lahteine	36e5c7c389	Merge pull request #6330 from thinkyhead/rc_improvements ... Sanity check per-axis options' array sizes	2017-04-13 13:08:44 -05:00
Scott Lahteine	02fca543bb	Merge pull request #6272 from thinkyhead/rc_adc_variable_rate ... Make ADC sensor reading frequency adjustable	2017-04-13 12:49:31 -05:00
Scott Lahteine	34308368c0	Sanity check per-axis settings for size	2017-04-13 11:35:20 -05:00
Scott Lahteine	ac96ae89f9	Apply const in Stepper::isr	2017-04-13 06:20:36 -05:00
Scott Lahteine	2fa1e882d0	Merge pull request #6325 from thinkyhead/rc_M20_with_size ... Simplified M20 with size	2017-04-13 05:06:52 -05:00
Bob-the-Kuhn	1b12fea0fa	simplified M20 with size	2017-04-13 04:56:58 -05:00
Scott Lahteine	4022b971db	Merge pull request #6315 from thinkyhead/rc_unify_M421 ... Unify M421	2017-04-12 19:43:28 -05:00
Scott Lahteine	b236562354	Merge pull request #6306 from thinkyhead/cleanup_after_6302 ... Adjustments to M100	2017-04-12 19:12:27 -05:00
Scott Lahteine	5e4f4d387f	Swap MBL z_values dimensions to [X][Y]	2017-04-12 17:24:05 -05:00
Scott Lahteine	063f641651	Unify M421	2017-04-11 15:46:13 -05:00
Scott Lahteine	6d5400dc31	Merge pull request #6240 from thinkyhead/rebuild_rgb_led ... Extend RGB LED with Printer Events	2017-04-11 15:16:57 -05:00
Scott Lahteine	dac21ec680	Add support for an RGBW LED	2017-04-11 12:58:55 -05:00
Scott Lahteine	e7746ffee4	Extend RGB LED support, adding Printer Events	2017-04-11 12:15:41 -05:00
Scott Lahteine	c7063eb55c	theTarget => target_temp	2017-04-11 12:15:41 -05:00
Scott Lahteine	36bda2bade	Add HAS_RESUME_CONTINUE shorthand macro	2017-04-11 12:15:40 -05:00
Scott Lahteine	53e6c33c37	2 is DXC_DUPLICATION_MODE	2017-04-11 12:15:40 -05:00
Scott Lahteine	a2cb0a3d54	Use multiply for delta probe constraint	2017-04-11 12:15:40 -05:00
Scott Lahteine	6487c96a4a	Merge pull request #6313 from Kaibob2/patch-10 ... Allow 10mm Movements for Z-Axis	2017-04-11 12:04:10 -05:00
Kai	001bc14255	Allow 10mm Movements for Z-Axis ... I use the movement options via LCD quite often. Especially to get the nozzle out of the way. I see no reason, why the 10mm option is disabled for the Z-Axis, this is why i always delete this line when i compile a new version. If this is unwanted, please just close this PR	2017-04-11 18:39:26 +02:00
Scott Lahteine	6a9b008044	Fix MINIMUM_STEPPER_PULSE maths	2017-04-11 11:11:17 -05:00
Scott Lahteine	68773f4486	Simplify stepper macros by renaming enable/disable macros	2017-04-11 11:10:26 -05:00
Scott Lahteine	e02a5a6371	Add macros for delays by machine cycle	2017-04-11 09:18:32 -05:00
Scott Lahteine	ecc537015a	Have M109 / M190 do nothing with no parameters	2017-04-11 05:06:25 -05:00
Scott Lahteine	03aa9a390e	Apply coding standards to M100, break up into functions	2017-04-10 21:09:43 -05:00
Scott Lahteine	48c16fc6ef	Merge pull request #6307 from thinkyhead/rc_less_no_reentrance ... Only lcd_synchronize needs no_reentry	2017-04-10 20:58:32 -05:00
Scott Lahteine	4fcfe926d6	Only lcd_synchronize needs no_reentry	2017-04-10 20:13:23 -05:00
Scott Lahteine	67fb7f82ac	Merge pull request #6283 from thinkyhead/rc_eeprom_z_fade ... Save / restore z_fade_height in EEPROM	2017-04-10 20:05:20 -05:00
Scott Lahteine	eff5af569b	Merge pull request #6300 from MagoKimbra/rc_fix_mesh_report ... Fix mbl_mesh_report	2017-04-10 19:37:19 -05:00
Scott Lahteine	4a18968c10	Merge pull request #6297 from Kaibob2/patch-9 ... Fix EPROM -> EEPROM	2017-04-10 19:35:30 -05:00
Roxy-3D	ba85faabc0	Fix M100 Free Memory Checker ... M100 had numerious changes and quit working. Part of the problem is the overloading of the SERIAL_PROTOCOL functions. Also, some of the address arithmatic was changed to use char *ptr and passing ptr into the SERIAL_PROTOCOL functions caused them to try to print a string instead of a number. M100 is working again. Let's keep it that way! M100 has been expanded to now have a function int free_memory_is_corrupted() that can be called from other code to see if the free space is still contiguous. It may make sense to add a flag to control its verbose nature but right now, the extra chit chat is very helpful to know int free_memory_is_corrupted() is doing the right thing and what it found at various points when it was called. A 'Show & Tell' is coming up with int free_memory_is_corrupted().	2017-04-10 15:33:55 -05:00
Kai	3b82db5fe9	Missing semicolon in ultralcd.cpp ... When PARK_HEAD_ON_PAUSE is defined Marlin won't compile because of two missing semicolon.	2017-04-10 14:45:51 -05:00
MagoKimbra	7d2e637867	Fix mbl_mesh_report	2017-04-10 20:50:19 +02:00
Kai	afeb0452ef	Fix EPROM -> EEPROM ... These fixes are neede because before it showed the englisch text even if language = de was selected	2017-04-10 18:37:00 +02:00
Scott Lahteine	7f950a80c0	Make ADC sensor reading frequency adjustable	2017-04-09 22:18:21 -05:00
Scott Lahteine	786af73e24	Convert config code to a static class	2017-04-09 22:06:41 -05:00
james94jeans2	5b9476fe78	Added z_fade_height to EEPROM-Settings ... Firmware was forgetting the z_fade_height in Planner, set by M420 Z<f>, after each reset or loading settings from EEPROM. Added the float z_fade_height to EEPROM-Storage, now remembers the value.	2017-04-09 21:16:58 -05:00
Scott Lahteine	9343f6a95f	Put TOSHIBA with other stepper driver options	2017-04-09 20:52:49 -05:00
Scott Lahteine	7a704af5e6	Merge pull request #6284 from thinkyhead/rc_wt150_rebase ... wt150 (Mightyboard Rev E) & RRD Full Graphic Smart Controller	2017-04-09 20:27:44 -05:00
Max Matveev	2031fb913b	Fixed comparison of float values to NaN	2017-04-09 20:28:46 +02:00
Scott Lahteine	e48a52a530	Patch a display issue with LCD_DECIMAL_SMALL_XY ... The `ftostr4sign` function got munged by the `WITHIN` patch	2017-04-09 10:25:35 -05:00
Scott Lahteine	1a3cd6a090	Merge pull request #6213 from thinkyhead/rc_gitattributes ... Init bed_level_virt_interpolate on EEPROM load	2017-04-09 08:13:11 -05:00
Scott Lahteine	314a02e2d5	Toggle with XOR	2017-04-09 07:58:47 -05:00
Scott Lahteine	8bc0d90b00	Init bed_level_virt_interpolate on EEPROM load	2017-04-09 07:04:20 -05:00
MD	20dd5376b8	Cheaptronic V2 ... Add support for new electronics www.reprapobchod.cz	2017-04-09 06:57:43 -05:00
Scott Lahteine	4cdda5615b	Bring other configs up to date with wt150 changes	2017-04-09 06:45:42 -05:00
Paweł Stawicki	9b0885f4f6	Allow boards without a thermistor	2017-04-09 06:45:41 -05:00
Paweł Stawicki	64cfcebe66	Update SlowSoftI2CMaster link. MightyBoard digipots I2C bus has no resistors.	2017-04-09 06:45:03 -05:00
Paweł Stawicki	0eb16d9ff7	Add example config for the wt150 printer with RepRapDiscount Full Graphic Smart Controller	2017-04-09 06:44:54 -05:00
Paweł Stawicki	652bedfa18	Add RepRapDiscount Full Graphic Smart Controller support to MIGHTYBOARD REVE	2017-04-09 06:44:53 -05:00
Paweł Stawicki	44cdebb8f1	Add software spi support for max6675	2017-04-09 06:44:53 -05:00
Paweł Stawicki	191fec009f	Add digipot i2c control for MCP4018	2017-04-09 06:44:53 -05:00
Scott Lahteine	e5b16081cb	Update TinyBoy2 configurations	2017-04-09 06:44:53 -05:00
Scott Lahteine	1855534f20	Config files cleanup	2017-04-09 06:44:52 -05:00
Scott Lahteine	c26a315d0b	Additional missed patches	2017-04-09 04:24:23 -05:00
Scott Lahteine	39617e10b8	Patch configs comment formatting	2017-04-09 03:49:16 -05:00
Scott Lahteine	c54f6cf23d	Updates to support 5 extruders	2017-04-09 03:49:16 -05:00
Scott Lahteine	2b88ccd0aa	Apply UBL mesh bounds to remaining configs	2017-04-09 03:49:15 -05:00
Scott Lahteine	60be3d264b	Macros to print floats, hiding imprecision	2017-04-09 03:48:40 -05:00
Scott Lahteine	b356d73239	Merge pull request #6278 from thinkyhead/pr_delta_angles ... Followup to additional delta trim options	2017-04-08 22:25:57 -05:00
Jimmy Envall	f78d44e91a	Added support for delta tower angle corrections.	2017-04-08 21:13:44 -05:00
Scott Lahteine	d3b4d84586	Merge pull request #6277 from thinkyhead/pr_roxy3d_rcbugfix ... Unify UBL Command Parsing	2017-04-08 20:17:46 -05:00
Scott Lahteine	d4ce839351	Cleanup following Pins Debug update	2017-04-08 18:59:57 -05:00
Scott Lahteine	c7a8f7970b	Formatting / cleanup	2017-04-08 18:59:57 -05:00
Scott Lahteine	29d4ec8257	Support 5 extruder auto fans	2017-04-08 18:59:57 -05:00
Scott Lahteine	824f3c1c0d	Fix up configuration comments	2017-04-08 18:59:56 -05:00
Scott Lahteine	995ed90248	Clean up Filament Width Sensor comments	2017-04-08 18:59:56 -05:00
Scott Lahteine	5a7b810fdd	General comment cleanup	2017-04-08 18:58:33 -05:00
Scott Lahteine	0027c22839	Drop extraneous calls to lcd_update	2017-04-08 18:58:33 -05:00
Scott Lahteine	d6db7a9b03	patch "step_remaining"	2017-04-08 18:13:20 -05:00
Scott Lahteine	cbc2331187	Use LCD_MESSAGEPGM over lcd_setstatuspgm	2017-04-08 18:04:39 -05:00
Scott Lahteine	3729510b1e	Set and check main parameter values, report all errors	2017-04-08 17:15:55 -05:00
Roxy-3D	34d3ed9ab1	These items were removed from the UBL Command Parsing ... Having these items randomly (and errorniously) disappear cost me several hours of work yesterday.	2017-04-08 15:30:20 -05:00
Scott Lahteine	15edb41cee	Patches to UBL	2017-04-08 14:59:14 -05:00
Roxy-3D	14cf527bb8	Getting setup for debugging	2017-04-08 14:59:14 -05:00
Scott Lahteine	f8408036f2	Merge pull request #6264 from thinkyhead/rc_five_extruders ... Support up to 5 extruders in Marlin	2017-04-07 12:48:56 -05:00
Bob-the-Kuhn	f7fc49c3a3	Finish name change ... DAC_STEPPER_DFLT wasn't changed to DAC_MOTOR_CURRENT_DEFAULT in all places on PR #6124	2017-04-07 11:05:24 -05:00
Scott Lahteine	832064e4f2	Implementation changes to support 5 extruders	2017-04-07 10:46:37 -05:00
Scott Lahteine	04050237f0	Header and pins changes to support 5 extruders	2017-04-07 10:46:36 -05:00
Scott Lahteine	2a84122edd	Configuration changes to support 5 extruders	2017-04-07 10:46:35 -05:00
Scott Lahteine	edf18977c1	Patch pins files hotends/e-steppers sanity check	2017-04-07 10:46:33 -05:00
Scott Lahteine	dc84678fc1	Fix HOTEND_STATUS_ITEM for graphical display	2017-04-06 23:07:30 -05:00
Scott Lahteine	a0de5d94e2	Merge pull request #6258 from benlye/benlye-bilinearfix2 ... Better fix for bilinear Z offset and G29 Z (update to #6251)	2017-04-06 20:51:57 -05:00
Scott Lahteine	b23aef5b8d	Merge pull request #6190 from Bob-the-Kuhn/Stop-and-Kill-prints---round-2 ... Message for every KILL and STOP (also need delays)	2017-04-06 20:40:12 -05:00
Roxy-3D	945303c0d5	eleminate bootscreen.h	2017-04-06 19:55:41 -05:00
Roxy-3D	ef3da3971e	Update ubl.h	2017-04-06 19:55:41 -05:00
Roxy-3D	8644dc170b	get synchronized to current file names	2017-04-06 19:55:41 -05:00
Roxy-3D	1451b7eacf	UBL's Grid Based Leveling code ... Pretty much... The code is in place. Still more work to do. But it has a lot of hooks and variables in other code, so commit and merge before I pick up a million 'Conflicts'.	2017-04-06 19:55:41 -05:00
Bob-the-Kuhn	549055f20c	Merge pull request #6124 from Bob-the-Kuhn/MCP4728-consistency ... MCP4728 consistency & fix ultralcd.cpp (PRINTRBOARD Rev F and RIGIDBOARD V2)	2017-04-06 16:35:50 -05:00
Bob-the-Kuhn	a77875c9d2	Merge pull request #6114 from Bob-the-Kuhn/try2-add-BLTouch-retry ... Another BLTouch retry place (replaces PR #6108)	2017-04-06 16:25:55 -05:00
Bob-the-Kuhn	3b9ff2cb12	Merge pull request #5676 from Bob-the-Kuhn/configuration.h ... Configuration.h - reword Z PROBE section	2017-04-06 16:18:34 -05:00
Bob-the-Kuhn	6643d553f6	# This is a combination of 2 commits. ... # This is the 1st commit message: MCP4728 consistency & fix ultralcd.cpp The MCP4728 DAC controls the stepper motor current strenth on the PRINTRBOARD Rev F and RIGIDBOARD V2 boards. PR #5792 on 9 FEB 2017 implemented default drive percentages but only on the RIGIDBOARD V2. This change moves the default settings to Configuration_adv.h. Also, ultralcd.cpp won't compile because of a type def conflict. Changed it to match the one in stepper_dac.cpp =========================================================== reword stepper curent section for clarity =========================================================== change name & improve comments =========================================================== changed name from A4JP to SCOOVO_X9H per PR #6139 # This is the commit message #2: fix typo	2017-04-06 16:16:27 -05:00
Bob-the-Kuhn	a44b3432c1	add BLTouch retry to a second place & add/update delays ... ================================================= implement requested changes ================================================= remove delays (they're in another PR) & move return	2017-04-06 16:13:07 -05:00
Bob-the-Kuhn	a5abc61fb9	Merge pull request #6219 from Bob-the-Kuhn/Servo-probe-and-toggle-pins ... M43 - add Toggle utility and Z servo utility (replaces PR #5864)	2017-04-06 16:10:50 -05:00
Bob-the-Kuhn	3b8926bd09	improved wording, consolidation of info, BLTouch warning ... ============================================== clarified BLTouch calculation & changed comment delimitters/flags I found it hard to pickout the various sections in this area so I changed most comments from // style to /** ... */ Made the BLTouch calculation simpler and clarified the units of measure for the result. ============================================ add changes to example configurations ============================================ add TinyBoy2 to this PR & add BLTouch Delay	2017-04-06 16:06:01 -05:00
Scott Lahteine	55d296aaf0	pinsDebug with more features, uses less RAM ... I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins	2017-04-06 16:06:01 -05:00
Scott Lahteine	e116723b8b	Adjust indentation in ubl.h	2017-04-06 16:06:00 -05:00
Scott Lahteine	1b3a26f2f5	Rename all UBL files with a ubl_ prefix	2017-04-06 16:06:00 -05:00
Scott Lahteine	d13991ae18	Use same config name for all mesh dimensions	2017-04-06 16:05:59 -05:00
Bob-the-Kuhn	f9686a108c	add Z servo test and toggle pins to M43	2017-04-06 15:59:38 -05:00
Scott Lahteine	62cbaa302e	Z_DUAL_ENDSTOP - make offset a configuration item ... The offset for Z_DUAL_ENDSTOP (z_endstop_adj) is already in Marlin. This PR just makes it a configuration item. z_endstop_adj is initialized in two places so both had to be modified.	2017-04-06 15:57:10 -05:00
Scott Lahteine	c9e35004e7	pinsDebug with more features, uses less RAM ... I've just uploaded a major change to pinsDebug. The big change was creating an array in FLASH that contained every active pin definition. That reduced the RAM memory usage considerably but increased the FLASH usage. Creating the array requires going through the pin list twice. Rather than having two copies of it in the code I moved the list out to another file (pinsDebug_list.h) and then just did two #includes. From the user’s view they’ll see the following changes: 1. Now reports all the names assigned to a pin 2. The port is now reported in addition to the pin number. 3. When PWM0A & PWM1C share a pin, both PWMs are reported 4. More PWM/Timer info is reported One new item that may cause some concern is the usage of the LINE predefined preprocessor macro. It may not be available if the Arduino IDE goes to a different compiler. Includes support for 1284 & 1286 families. Memory usage changes when enabling PINS_DEBUGGING: ATmega2560 FLASH . without 52576 . with new 64592 . with old 62826 . new-out 12016 . old-out 10250 . new-old 1766 . RAM . without 2807 . with new 2875 . with old 3545 . new-out 68 . old-out 738 . new-old -670 ================================================================== minor changes - mostly formatting 1) added newline to end of teensyduino file 2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings about redefining TEENSYDUINO 3) removed some trailing spaces reduce PROGMEM size & update pin list Reduced PROGMEM usage by 1) converting often used macro to a function 2) moved as much as possible into the function This required creating two arrays of address pointers for the PWM registers. ================================================================== update with new M3, M4, M5 pin names ================================================================== report I/O status for unused/unknown pins	2017-04-06 14:46:28 -05:00
Scott Lahteine	4abd53f65a	Adjust indentation in ubl.h	2017-04-06 05:36:16 -05:00
Scott Lahteine	f5c5c1f771	Rename all UBL files with a ubl_ prefix	2017-04-06 05:33:27 -05:00
benlye	f1d50ac1dc	Fixing bilinear Z offset and G29 Z ... The fix in #6251 for bilinear Z offset was flawed and broke the Z parameter of G29 for bilinear levelling. This is reverted and a different fix is used for the double-addition of the Z-probe offset to the bilinear correction grid.	2017-04-06 07:41:46 +01:00
Scott Lahteine	eb1e6aa29b	Use same config name for all mesh dimensions	2017-04-06 00:42:52 -05:00
Scott Lahteine	c961dd084d	Add hidden option to output Bilinear grids in JSON	2017-04-05 23:43:17 -05:00
Scott Lahteine	df7b4252fd	Reduce M420 code for UBL slightly	2017-04-05 22:30:29 -05:00
Scott Lahteine	8866158d03	Add LEVELING_DATA as a capability	2017-04-05 22:30:28 -05:00
benlye	0a2b4f3486	Fix bilinear levelling z offset ... Since run_probe was altered to return the probe Z position rather than the nozzle Z position bilinear levelling has been broken because the Z-offset has been applied twice - once in the run_probe function, and then again in the G29 code for bilinear levelling.	2017-04-05 22:01:40 -05:00
Scott Lahteine	44a849bdce	Fix broken M206/M428/G92 offsets	2017-04-05 22:01:37 -05:00
Roxy-3D	52978e5ba5	Fix spelling mistake when UBL's mesh is Inactive	2017-04-02 20:07:09 -05:00
Roxy-3D	0423e93c42	Fix M421 AUTO_BED_LEVELING_BILINEAR and AUTO_BED_LEVELING_UBL ... M421 was not connected up for AUTO_BED_LEVELING_BILINEAR. M421 needed to migrate mesh data to new UBL EEPROM layout.	2017-04-02 16:46:37 -05:00
Scott Lahteine	3412950abc	Merge pull request #6209 from thinkyhead/rc_psu_zero ... Power Supply 0 as "General"	2017-04-02 16:44:42 -05:00
Roxy-3D	3e9e94801f	Fix problem described in issue # 6175 ... As it turns out... an unsigned int can not go to less than 0, so the loop never terminates.	2017-04-02 13:00:27 -05:00
Scott Lahteine	289e3d6844	Merge pull request #6215 from thinkyhead/rc_bed_false_alarm ... Fix thermal runaway when nonexistent bed temp is set	2017-04-02 11:59:58 -05:00
Scott Lahteine	948728e63b	Fix line-endings in UBL_G29	2017-04-02 11:48:26 -05:00
Scott Lahteine	699310d1d2	Fix: Thermal runaway if nonexistent bed's temp is set	2017-04-02 11:48:10 -05:00
Scott Lahteine	c56eec29f0	Configurable delay for BLTouch servo emulation	2017-04-02 11:14:53 -05:00
Scott Lahteine	deaad78df9	Merge pull request #5678 from Bob-the-Kuhn/G38-optional-double-tap ... G38 bug fix, made double touch optional & reverted to Z_MIN_PROBE	2017-04-02 10:32:04 -05:00
Scott Lahteine	5bce731962	Fix LCD preheat menus	2017-04-02 09:32:22 -05:00
Scott Lahteine	4c72167af3	Prevent a warning on echo_command	2017-04-02 08:36:58 -05:00
Scott Lahteine	9b5fd9522e	Fix formatting, order for a UBL change	2017-04-02 07:15:40 -05:00
Tannoo	54173c80ad	Power Supply 0 as "General"	2017-04-02 06:21:34 -05:00
Scott Lahteine	a2775d0c70	can wstring be removed?	2017-04-02 04:43:33 -05:00
Scott Lahteine	de4e19f17e	Patch MarlinSerial to match up with 32-bit version	2017-04-02 04:39:18 -05:00
Scott Lahteine	2cbc7b4b73	Relocate serial macros and functions	2017-04-02 01:05:25 -05:00
Scott Lahteine	eaa66f3c46	Indent MarlinSerial code	2017-04-02 01:05:25 -05:00
Scott Lahteine	7a7a80e6c5	status_printf => lcd_status_printf_P	2017-04-02 01:05:25 -05:00
Scott Lahteine	0e6ec34228	Use PSTR versions of lcd_status... to save SRAM	2017-04-02 00:45:39 -05:00
Scott Lahteine	34e2420b9b	Apply const args, clean up find_closest_circle_to_print	2017-04-01 23:15:41 -05:00
Scott Lahteine	e19fbd27ce	Minor spelling patch	2017-04-01 23:08:00 -05:00
Scott Lahteine	790a3e9a8c	Remove extraneous check of UBL_G26_MESH_EDITING	2017-04-01 23:03:40 -05:00
Scott Lahteine	7310110ec0	Fix logic of UBL::fade_scaling_factor_for_z	2017-04-01 22:52:48 -05:00
Scott Lahteine	1a775cecac	Revert behavior of enqueue_and_echo_commands_P	2017-04-01 21:53:46 -05:00
Scott Lahteine	79d42d87c1	Syntax cleanup	2017-04-01 21:53:46 -05:00
Scott Lahteine	b47fd31c37	Revert some changes to UBL	2017-04-01 21:53:45 -05:00
Bob-the-Kuhn	185337e787	add delays to allow stop & kill messages to get out	2017-04-01 00:23:14 -05:00
Scott Lahteine	63abb65146	Update description of PINS_DEBUGGING	2017-03-31 18:57:48 -05:00
Scott Lahteine	73e193da1d	Implement LCD_BED_LEVELING for PROBE_MANUALLY	2017-03-31 11:50:18 -05:00
Scott Lahteine	fcadc7bb1a	Implement the "manual" option for ABL	2017-03-31 11:50:18 -05:00
Scott Lahteine	9e22184936	Add a "manual" option for ABL	2017-03-31 11:50:18 -05:00
Scott Lahteine	541165e878	Merge pull request #6181 from thinkyhead/rc_ubl_further_fixes ... Further adjustments to UBL code	2017-03-31 11:35:02 -05:00
Scott Lahteine	b19a15fa7f	Within applied to UBL	2017-03-31 11:12:57 -05:00
Scott Lahteine	342ee458ae	Additional UBL fixes, optimizations	2017-03-31 11:12:57 -05:00
Scott Lahteine	a5e085cbea	Have run_probe() return probe Z, not nozzle Z	2017-03-31 09:27:49 -05:00
Scott Lahteine	4487d22d56	Apply FIXFLOAT macro	2017-03-31 09:27:48 -05:00
Scott Lahteine	6cac0f43eb	MBL fiddle	2017-03-31 09:27:48 -05:00
Scott Lahteine	25a6bfa7ed	Add and apply WITHIN macro	2017-03-31 09:27:48 -05:00
Scott Lahteine	81136c1e82	Merge pull request #6177 from thinkyhead/rc_tinyboy ... Support for TinyBoy 2 3D printer (and its OLED display)	2017-03-31 04:31:47 -05:00
Scott Lahteine	93aad54dc1	Clean up code, remove _now command function	2017-03-31 04:17:31 -05:00
Stefan Brüns	6ba6c92a81	Add example configuration for TinyBoy L10/L16 ... The TB2 is a Indiegogo funded 3d printer. It uses a MKS SMELZI V1.0 main board (based on MELZI, i.e. Sanguinololu). I comes as a complete kit, including display and panel. Two variants exists, L10 and L16, with a height of 100 and 160 mm. The heating function of the provided bed can enabled by soldering a thermistor and some wires to it. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>	2017-03-31 04:05:35 -05:00
Stefan Brüns	0fe57ad4f5	Add Support TinyBoy2 OLED/Encoder panel ... The OLED is driven by an SSD1306, connected to the board via I2C, the rotary encoder is connected to 3 GPIO pins. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>	2017-03-31 04:05:34 -05:00
Scott Lahteine	65ca6472ba	Make G26 compatible with G92 and M206	2017-03-31 02:20:20 -05:00
Scott Lahteine	4902fd4e95	More data in UBL class, make it a static class ... - Make all `unified_bed_leveling` data/methods static - Move some UBL-related variables into the class - Replace `map_[xy]_index_to_bed_location` with `mesh_index_to_[xy]pos`	2017-03-31 02:20:20 -05:00
Scott Lahteine	edbc024d76	Disable UBL_G26_MESH_EDITING by default	2017-03-31 02:20:20 -05:00
Scott Lahteine	9e4bd6b3b5	Further repairs to UBL, comments, spacing	2017-03-31 02:20:20 -05:00
Bob-the-Kuhn	f3618c3337	Reduce UBL RAM usage by making G26/G29 optional	2017-03-31 02:20:19 -05:00
Scott Lahteine	c9eb1d6ab7	Make MBL a static class, use lookup for index-to-point conversion	2017-03-31 01:28:07 -05:00
Scott Lahteine	de9d2cddc3	Merge pull request #6152 from thinkyhead/rc_cleanup_6150_etc ... UBL cleanup, optimization	2017-03-30 17:40:29 -05:00
Scott Lahteine	9217e4b8ec	Various UBL cleanups and bug fixes	2017-03-30 17:09:49 -05:00
Scott Lahteine	9924199802	Merge pull request #5908 from thinkyhead/rc_fix_slowdown ... General minor cleanup	2017-03-29 21:43:33 -05:00
Scott Lahteine	0e71e7b2fb	Cleanup to planner.cpp	2017-03-29 06:48:07 -05:00
Scott Lahteine	f105cad43c	Marlin: Slight cleanup to Marlin_main.cpp	2017-03-29 06:40:29 -05:00
Scott Lahteine	499f9e04e1	Marlin: Temperature soft-PWM cleanup	2017-03-29 06:37:27 -05:00
Scott Lahteine	7ddd94dc61	Merge pull request #5994 from StefanBruens/fix_Makefile_errors ... Fix makefile errors, cleanup	2017-03-29 06:32:08 -05:00
Scott Lahteine	af09095f03	Merge pull request #6154 from thinkyhead/rc_fil_sensor_vs_sd ... Show Filament Width on LCD when SD is disabled	2017-03-29 05:24:48 -05:00
Remo Kallio	d38b1bc4b1	Show filament width sensor values in LCD constantly if SD card support is not enabled.	2017-03-29 04:03:08 -05:00
Scott Lahteine	e3459ec178	Merge pull request #5989 from MagoKimbra/rc_fix_delta_angles ... Fix delta_angles	2017-03-29 03:35:18 -05:00
Scott Lahteine	f49aec057f	Tweak "can not" => "can't" in RUMBA pins	2017-03-29 01:04:50 -05:00
Scott Lahteine	0a23a1bb3b	Dynamic feedrate on SCARA, converting target mm/s to deg/s	2017-03-28 17:21:07 -05:00
Roxy-3D	d8724bb546	Get G29's P1 (Automated Probing) working again. ... Incorrect optimizations of data types and ternary operators caused some issues.	2017-03-28 17:11:02 -05:00
Scott Lahteine	c7f6ee9c93	Board A4JP should be SCOOVO_X9H	2017-03-27 22:22:13 -05:00
Scott Lahteine	a9fc30ae2e	Use safe_delay to ensure watchdog reset	2017-03-26 23:49:56 -05:00
Roxy-3D	171904b6c7	Make G29 What command print reliably and fix G29 P1 bug Waldo found	2017-03-26 17:05:58 -05:00
Roxy-3D	9d3ac66f73	Map clean up of UBL ... UBL's maps are cleaner. And with a 1 value, G29 O 1 will generate a map suitable to be Cut & Pasted into Excel so a Suface Map can be generated.	2017-03-25 18:55:05 -05:00
Roxy-3D	9a1949a91e	Cleaned up G26 ready to replace existing one at MarlinFirmware/Marlin	2017-03-25 10:15:40 -05:00
Roxy-3D	aec85ad45a	Start of process to get UBL running again. ... The wait_for_user change totally broke UBL. But there is stuff wrong now in the thermal code and/or LCD Panel code.	2017-03-24 18:38:27 -05:00
Scott Lahteine	b47eaf14ae	Merge pull request #6109 from thinkyhead/rc_soft_pwm_dither ... PWM dithering followup	2017-03-24 18:21:07 -05:00
Scott Lahteine	34d1c41b5f	Merge pull request #6111 from benlye/benlye-patch-echo_command ... Fix type conversion issue with echo_command	2017-03-24 17:57:28 -05:00
benlye	6a601aca35	Fix type conversion issue with echo_command ... With the the current definition of echo_command I cannot compile RCBugFix (Arduino IDE 1.8.1) with the error "invalid conversion from 'const char*' to 'char*'". This change resolves that.	2017-03-24 17:23:02 +00:00
Scott Lahteine	009a6ddd39	Adjust bilinear grid in M851	2017-03-24 06:28:59 -05:00
Scott Lahteine	eab7854a73	Merge pull request #6074 from thinkyhead/rc_immediate_shove ... Immediate commands take precedence	2017-03-24 05:52:27 -05:00
Stefan Brüns	5699e2b881	Add SOFT_PWM_DITHER to other configurations	2017-03-24 05:02:24 -05:00
Scott Lahteine	5a2abeca78	Merge pull request #6100 from thinkyhead/rc_soft_pwm_dither ... Enhancement of PWM, with dithering	2017-03-24 04:57:40 -05:00
Scott Lahteine	043be2856b	Use "& 0x3F" instead of "% 64"	2017-03-24 04:13:50 -05:00
Stefan Brüns	6a040a6967	SOFT_PWM: Do not switch off heaters twice on pwm_count wraparound ... After wraparound, pwm_count <= pwm_mask holds, thus soft_pwm_X <= pwm_count guarantees soft_pwm_X < pwm_mask is true, and the heater will be switched off in the first branch. Do not evaluate the pwm conditions a second time, this reduces the instruction count (4 instructions per PWM) and text size (6 byte). Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>	2017-03-24 04:13:50 -05:00
Stefan Brüns	0a74774af1	soft_pwm: avoid useless refetches of pwm_count ... The compiler is not able to reuse the value of pwm_count, but reloads it on every evaluation, if is stored in a static variable, as it cannot prove it will be unchanged. A variable with local scope may not be modified from the outside, so its value can be reused. Doing so reduces text size and instruction count. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>	2017-03-24 04:13:50 -05:00
Stefan Brüns	35a55d5757	SOFT_PWM: Implement dithering if SOFT_PWM_SCALE is 1 or more ... If dithering is enabled, the remainder of the soft_pwm_X duty value at turnoff time is added to the next cycle. If e.g. the duty is set to 9 and SCALE is set to 2, the PWM will be active for 8 counts for 3 cycles and 12 counts on each fourth cycle, i.e. the average is 9 cycles. This compensates the resolution loss at higher scales and allows running fans with SOFT_PWM with significantly reduced noise. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>	2017-03-24 04:13:36 -05:00
Stefan Brüns	2aed66a955	temperature: Fix SOFT_PWM off by one ... A 128 step PWM has 127 intervals (0/127 ... 127/127 duty). Currently, a PWM setting of 1/127 is active for 2/128, i.e. double the expected time, or, in general n+1/128 instead of n/127. Fixes issue#6003. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>	2017-03-24 04:13:36 -05:00
Scott Lahteine	b5711a99a2	Patches to bring UBL closer to compliance	2017-03-24 01:37:52 -05:00
Scott Lahteine	d076c1b604	Apply some general cleanup to code	2017-03-24 01:37:51 -05:00
Scott Lahteine	d1e6b0e21a	Reduce STEP_PULSE_CYCLES code slightly	2017-03-24 00:50:05 -05:00
Scott Lahteine	783338a0b8	Add UBL_MESH_EDIT_ENABLED to configs	2017-03-24 00:44:55 -05:00
Scott Lahteine	8d54ffbf05	Adjust vector_3 code with const, some optimization	2017-03-23 19:41:42 -05:00
Roxy-3D	8ee2612ebb	The hex nibble routine can print again! ... The code to print a hex nibble got broke. SERIAL_ECHO( (char) ) isn't suitable for its use.	2017-03-23 16:08:37 -05:00
Roxy-3D	b8e4a6970b	Get UBL up and running again ... All the changes to get the code into compliance with Marlin coding standards made UBL sick. This pretty much gets UBL back up and running.	2017-03-23 16:08:37 -05:00
Roxy-3D	5de1da2b3c	Make UBL honor the #define ENABLE_LEVELING_FADE_HEIGHT option	2017-03-23 16:08:37 -05:00
Scott Lahteine	8f9face956	Merge pull request #6088 from rafaljot/patch-3 ... Update Marlin_main.cpp	2017-03-23 01:51:51 -05:00
Scott Lahteine	782634b6c9	Merge pull request #6081 from Sebastianv650/MIN_STEPPER_PULSE_for_Babystepping ... Add MINIMUM_STEPPER_PULSE ability to babystepping	2017-03-22 21:57:36 -05:00
Scott Lahteine	af2ea23e9c	EXTRUDER_RUNOUT_PREVENT uses buffer_line_kinematic	2017-03-22 20:51:12 -05:00
Scott Lahteine	cd882b88db	#if defined => #ifdef / PIN_EXISTS	2017-03-22 20:51:11 -05:00
Scott Lahteine	e244399766	Additional cleanup of UBL code	2017-03-22 20:51:10 -05:00
Bob-the-Kuhn	0934563b97	G38 optional double touch ... Made the double touch portion a conditional compile based on the PROBE_DOUBLE_TOUCH flag. ============================================== Bugfix The current G38 only stopped a move if it involved the Z axis. Moved all the G38 code to it's own section and put it where it would always be executed no matter what axis was moving or if the endstop was enabled. Also added a comment to configuration_adv to alert the user the double tap had to be turned on. ============================================== Change G38 back to using Z_MIN_PROBE There's no Z_MIN endstop if Z_DUAL_ENDSTOPS is enabled and you have them set to the top of the gantry. G38 started out as using the Z_MIN_PROBE pin. I don't remember why we changed it to the Z_MIN endstop.	2017-03-22 15:08:49 -05:00
Scott Lahteine	cc3204509c	UBL patch from Bob-the-Kuhn	2017-03-22 07:54:20 -05:00
Scott Lahteine	b904b5ae8d	Audible feedback for settings store/load/reset	2017-03-22 02:15:21 -05:00
Sebastianv650	bf57eb2447	Protect Babystepping against other ISRs ... Especialy against stepper ISR. This is even more important when a minimum pulse width is set, increasing the runtime of a babystep.	2017-03-21 18:05:44 +01:00
Sebastianv650	80830919dc	Add MINIMUM_STEPPER_PULSE ability to babystepping	2017-03-21 17:50:38 +01:00
rafaljot	6da949bbf0	Update Marlin_main.cpp ... Sometimes after killing heaters are still on.	2017-03-21 15:06:01 +01:00
Roxy-3D	72f7b14e66	Make G29's Interactive Mesh Editor Work	2017-03-20 12:52:51 -05:00
Roxy-3D	3fd74b121f	Get G29's Interactive Mesh Editor running ... G29 P4 R O should work now.	2017-03-20 12:52:51 -05:00
Roxy-3D	1d58558bec	Spelling fix	2017-03-20 12:52:51 -05:00
Scott Lahteine	2573f4dd05	Merge pull request #6052 from thinkyhead/rc_lift_on_pause ... Add PARK_HEAD_ON_PAUSE feature / M125	2017-03-20 03:36:31 -05:00
Scott Lahteine	48c6284c91	Immediate commands take precedence	2017-03-19 21:50:48 -05:00
Roxy-3D	76c270fdf2	Allow FWRETRACT with UBL Enabled ... The retraction flag in UBL's G26 was conflicting with the FWRETRACT option. All fixed!	2017-03-19 15:43:12 -06:00
Roxy-3D	c377c59d47	Allow G29 P1 R to generate the mesh ... Fix the logic change that happened when UBL got merged.	2017-03-19 15:13:33 -06:00
Scott Lahteine	ff0dd162b7	PARK_HEAD_ON_PAUSE implementation	2017-03-19 07:27:35 -05:00
Scott Lahteine	26473cab6d	Add PARK_HEAD_ON_PAUSE feature	2017-03-19 05:06:55 -05:00
Scott Lahteine	4cf51157b3	Use XYZE rather than NUM_AXIS	2017-03-19 01:14:39 -05:00
Scott Lahteine	4c7f14752a	Add disable_e_steppers function	2017-03-19 01:14:39 -05:00
Scott Lahteine	8eb29f91e6	Patch filament change options and beep code	2017-03-19 01:14:39 -05:00
Scott Lahteine	56c9dfc83b	Merge pull request #6066 from thinkyhead/rc_felix_fix ... Update Felix config for UBL	2017-03-19 01:11:02 -05:00
Scott Lahteine	9b2b53f63a	Merge pull request #6042 from thinkyhead/rc_fix_toolchange_z ... Move Z last in tool-change for SWITCHING_EXTRUDER	2017-03-19 00:34:41 -05:00
Scott Lahteine	f98fb6b38e	Update Felix config for UBL	2017-03-19 00:28:48 -05:00
Scott Lahteine	7cabe81373	Merge pull request #6057 from thinkyhead/rc_followup_6054 ... Followup 6054 with some cleanup	2017-03-18 13:49:20 -05:00
Scott Lahteine	4bca27ab89	Fix Kelvin conversion ... Thanks to @ospalh -- #6056	2017-03-18 13:23:08 -05:00
Scott Lahteine	143ab8f329	Remove Roxy's personal configurations	2017-03-18 12:35:02 -05:00
Scott Lahteine	2512871a36	Patch configs UBL followup	2017-03-18 12:32:03 -05:00
Scott Lahteine	27b5666e15	Move Allen Key probe definition to the top	2017-03-18 12:27:37 -05:00
Scott Lahteine	77cf648ed3	Move menu selection past static items in 1 screen	2017-03-18 12:26:21 -05:00
Scott Lahteine	2c630a1b5c	Merge pull request #6054 from thinkyhead/rc_ubl_renewal ... UBL for RCBugFix — cleanup, rebase, patch	2017-03-18 12:07:57 -05:00
Scott Lahteine	0492a3a8f1	Merge pull request #6027 from Bob-the-Kuhn/add_kill_info ... Message for every KILL and STOP	2017-03-18 11:49:35 -05:00
Scott Lahteine	6618346148	Patches to work around "register spill" compiler bug	2017-03-18 11:35:21 -05:00
Scott Lahteine	be7dd90382	Add Thermistor 75: MGB18 silicon pad	2017-03-18 11:35:20 -05:00
Scott Lahteine	b0a9c82c31	Fix single-char echo and pinMode usage	2017-03-18 11:35:20 -05:00
Scott Lahteine	fb60aa3736	UBL implementation	2017-03-18 11:35:20 -05:00
Scott Lahteine	238b8fd2a3	UBL core and support files	2017-03-18 11:35:19 -05:00
Scott Lahteine	cf94688925	Univeral Bed Leveling - configuration	2017-03-18 11:35:19 -05:00
Scott Lahteine	03aa424ccb	Merge pull request #6053 from thinkyhead/rc_clean ... Remove extraneous whitespace	2017-03-18 03:26:45 -05:00
Scott Lahteine	af644871bf	Merge pull request #6045 from thinkyhead/rc_remove_raw_kinematics ... Remove delta optimization concepts… for now	2017-03-18 03:26:24 -05:00
Scott Lahteine	77491dd924	Remove extraneous whitespace	2017-03-18 03:17:39 -05:00
Scott Lahteine	b865b21d32	Can't use Z fade height with DELTA	2017-03-17 08:34:47 -05:00
Scott Lahteine	1e57b0c269	Remove delta interpolation concept	2017-03-17 06:32:11 -05:00
Scott Lahteine	e46898f8e5	Remove kinematic optimizations	2017-03-17 06:30:22 -05:00
Scott Lahteine	11f1fdfab4	_lcd_level_bed_position => manual_probe_index	2017-03-17 06:05:17 -05:00
Scott Lahteine	0e410c9dfd	Software endstop options as simple switches	2017-03-17 06:05:17 -05:00
Scott Lahteine	d01b915085	Implement soft_endstops_enabled for clamping	2017-03-17 06:05:17 -05:00
Scott Lahteine	e4649c9044	Add HAS_SOFTWARE_ENDSTOPS macro	2017-03-17 06:05:17 -05:00
Scott Lahteine	3e927ff204	Replace MBL Z hacking	2017-03-17 06:05:17 -05:00
Scott Lahteine	4e53124681	Merge pull request #6039 from Bob-the-Kuhn/M114-sync-with-stepper ... M114 - wait for move completion before reporting position	2017-03-17 05:22:46 -05:00
Scott Lahteine	734f9ea133	Merge pull request #6040 from thinkyhead/rc_sanity_use_assert ... Simplify some sanity checks with static_assert	2017-03-17 05:22:17 -05:00
Scott Lahteine	f02af83d42	Remove some extraneous spaces	2017-03-16 23:59:11 -05:00
Scott Lahteine	672e45652e	Improved solution to tool-change bug	2017-03-16 23:59:10 -05:00
Scott Lahteine	23f1cfb46f	Fix stuck CHDK pin as suggested in #6041	2017-03-16 21:49:39 -05:00
Scott Lahteine	0b22069e82	Merge pull request #6021 from Bob-the-Kuhn/BUG-FIX--Switching-extruder-tool-change-Z-height ... Bug Fix: Switching extruder tool change leaves Z in wrong position	2017-03-16 21:15:20 -05:00
Scott Lahteine	e7e4500629	Simplify some sanity checks with static_assert	2017-03-16 16:31:34 -05:00
Bob-the-Kuhn	34ff0c3439	M114 - wait for move completion before reporting position	2017-03-16 15:10:45 -05:00
Bob-the-Kuhn	b31604a492	Message for every KILL and STOP ... No more mystery halts & resets Moved messages to language.h Added current command to inactive timeout message	2017-03-15 21:05:11 -05:00
Kai	13b44d019b	Update language_de.h ... Addition of missing strings to match language_en.h	2017-03-15 16:06:52 +01:00
Bob-the-Kuhn	685ed5393a	Bug Fix: Switching extruder tool change leaves Z in wrong position ... The tool_change function saves the current_position to the destination array soon after starting. Later in the switching extruder section, the destination array is modified when moving the Z axis up & down. A later section of tool_change moves the head back to the “original location” using the destination array. This later section assumes that the destination array hasn’t been modified. The fix is to save the destination Z position and then restore it after the Z movements have completed. Going back to using the current_position array for the switching extruder Z axis moves (and leaving the destination array untouched) doesn’t fix the problem. This bug was introduced by the “Make tool_change kinematic compatible” commit # 847429eff4 which was merged on 10 Oct 2016 as part of PR 4982. This bug was discovered in Issue 5966.	2017-03-14 02:36:24 -05:00
Scott Lahteine	51353f8fea	Merge pull request #6000 from trivalik/NoWorkspaceWarning ... prevent warning with define of NO_WORKSPACE_OFFSETS	2017-03-12 00:00:51 -06:00
MagoKimbra	a4a9bd8bc9	Fix BUG set_position_mm ... Set postion must have axis and not E_AXIS + active_extruder.	2017-03-11 14:13:39 +01:00
Trivalik	71ac6f9d42	prevent warning with define of NO_WORKSPACE_OFFSETS	2017-03-09 23:49:57 +01:00
Stefan Brüns	9ba6c051a1	Makefile: add nozzle.cpp too CXXSRC list ... The file is required by the optional NOZZLE_PARK_FEATURE. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>	2017-03-09 03:08:49 +01:00
Stefan Brüns	9cc8d495b8	Makefile: remove no longer existing search paths ... ArduinoAddons has been removed from Marlin, remove any references to it. Replace HARDWARE_SRC and HARDWARE_DIR with its expanded equivalents. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>	2017-03-09 01:46:47 +01:00
Stefan Brüns	bf563e62c1	Makefile: add printcounter.cpp too CXXSRC list ... The file is required by the optional PRINTCOUNTER feature. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>	2017-03-09 01:45:54 +01:00
Stefan Brüns	ddecc1441d	Makefile: Fix linker error ... Instantiation of the static singleton instance thermalManager in general requires locking, but we know its safe to do without. Add -fno-threadsafe-statics to avoid using locking primitives, which result in linking errors: undefined reference to `__cxa_guard_acquire' undefined reference to `__cxa_guard_release' Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>	2017-03-09 01:45:38 +01:00
MagoKimbra	37a26dfc09	Fix delta_angles	2017-03-08 09:23:30 +01:00
Scott Lahteine	2defb1d748	Use SET_INPUT_PULLUP where appropriate	2017-03-07 23:43:33 -06:00
Scott Lahteine	58b3e98878	Use arrays for delta tower parameters	2017-03-07 19:00:22 -06:00
Scott Lahteine	47242a40bb	Apply updated changes for delta_tower_angle_trim	2017-03-07 18:15:11 -06:00
Jimmy Envall	00b6b3da79	Added support for delta tower angle corrections.	2017-03-07 16:35:58 -06:00
Scott Lahteine	5a456c832a	Apply TMC2130 to example configurations	2017-03-07 04:22:06 -06:00
Scott Lahteine	45f949d833	TMC2130 Library: @teemuatlut replaces @makertum	2017-03-07 04:22:06 -06:00
Scott Lahteine	33f8a8a344	Merge pull request #5973 from thinkyhead/rc_circle_pattern ... Add circle pattern to nozzle clean	2017-03-06 04:47:01 -06:00
Scott Lahteine	94b3e0a483	Merge pull request #5959 from benlye/benlye-fixm48 ... Remove extra carriage return in M48 V1 output	2017-03-06 04:24:28 -06:00
Scott Lahteine	a9a1971295	Merge pull request #5972 from thinkyhead/rc_cooldown_before ... Fix preheat menu formatting	2017-03-06 03:21:29 -06:00
Scott Lahteine	6aa81255a9	Patch and clean up "flsun" kossel. Followup to #5911.	2017-03-06 03:15:00 -06:00
Scott Lahteine	b2270b3f3e	Apply prior nozzle clean update	2017-03-06 03:14:59 -06:00
Marek Pikuła	7698c5617a	Added circle nozzle cleaning parameters to example configurations	2017-03-06 03:04:58 -06:00
Marek Pikuła	6836b94eea	Added circle pattern for nozzle cleaning feature	2017-03-06 03:03:00 -06:00
Scott Lahteine	3b75518ef6	Merge pull request #5911 from aphex3k/flsun_kossel_mini ... Configuration.h and Configuration_adv.h for the kossel mini by flsun	2017-03-06 02:26:01 -06:00
Scott Lahteine	3830778852	Apply NO_WORKSPACE_OFFSETS to lcd menu	2017-03-06 02:21:42 -06:00
Scott Lahteine	7e3aab889d	Fix preheat menu formatting	2017-03-06 02:07:07 -06:00
Scott Lahteine	fea0d3f20f	Endstop and temp-isr general cleanup	2017-03-06 02:07:07 -06:00
Scott Lahteine	aef08e8780	Compact some macro substitutions	2017-03-06 02:07:07 -06:00
Scott Lahteine	2f620f86d9	Merge pull request #5970 from thinkyhead/rc_cooldown_before ... Preheat Hotend Only menu items	2017-03-06 01:56:05 -06:00
Scott Lahteine	02de8e6f18	Merge pull request #5957 from MagoKimbra/rc_stepper_indirection_fix ... Stepper indirection fix tmc driver	2017-03-06 01:16:40 -06:00
Scott Lahteine	6c5312559c	Menu item to preheat only the hotend	2017-03-06 01:14:54 -06:00
Scott Lahteine	9d0142e8ae	Move Change Filament above Cooldown	2017-03-06 01:13:12 -06:00
Scott Lahteine	0c55095c5e	Move Cooldown above Preheat	2017-03-06 01:13:12 -06:00
Scott Lahteine	c15c65f18a	Merge pull request #5971 from thinkyhead/rc_fix_e_factors ... Patch DISTINCT_E_FACTORS bug	2017-03-06 01:11:17 -06:00
Scott Lahteine	bfb0007573	Patch DISTINCT_E_FACTORS bug	2017-03-05 23:19:31 -06:00
Scott Lahteine	be98016674	Merge pull request #5963 from thinkyhead/rc_no_offsets_optim ... New option: NO_WORKSPACE_OFFSETS	2017-03-05 21:46:49 -06:00
Scott Lahteine	8e89a802f7	Document PROTOCOL_VERSION	2017-03-05 04:43:46 -06:00
Scott Lahteine	87b03b16bd	Use a macro for array copies	2017-03-05 04:43:46 -06:00
Scott Lahteine	e141f3a03f	Optimize coordinate transformation ... Pre-compute the combined position shift and home offset to save a single float fetch-and-add per conversion. Great for delta/scara and bed leveling.	2017-03-05 04:43:16 -06:00
Scott Lahteine	5f7e85398b	Implement NO_WORKSPACE_OFFSETS	2017-03-05 04:43:15 -06:00
Scott Lahteine	05abe853f9	New option: NO_WORKSPACE_OFFSETS	2017-03-05 04:43:15 -06:00
Scott Lahteine	20addc6e32	Merge pull request #5955 from thinkyhead/rc_eeprom_fail_better ... Display a message for EEPROM version mismatch	2017-03-04 17:15:07 -06:00
benlye	dead89062a	Update Marlin_main.cpp ... Remove unnecessary line break from M48 V1 output.	2017-03-04 17:58:10 +00:00
MagoKimbra	ae277aebc6	Stepper indirection fix tmc driver	2017-03-04 12:17:39 +01:00
Scott Lahteine	8f4e4b1995	Display a message for EEPROM version mismatch	2017-03-04 01:20:36 -06:00
Scott Lahteine	177ad245f6	Merge pull request #5953 from thinkyhead/fix_fc_e_index ... Fix submenu hotend status display	2017-03-04 00:12:29 -06:00
Scott Lahteine	cea3ea772c	Fix submenu hotend status display	2017-03-03 22:12:22 -06:00
Scott Lahteine	b27f69ba51	Merge pull request #5813 from thinkyhead/rc_fix_makrpanel ... Fix MAKRPANEL assignments	2017-03-03 21:40:49 -06:00
Scott Lahteine	1ef6ccd919	Merge pull request #5951 from thinkyhead/rc_print_2d_array ... Reduce code size (40b, or 166b with bilinear subdivision)	2017-03-03 21:27:44 -06:00
Scott Lahteine	53f5086905	Fix MAKRPANEL assignments ... MAKRPANEL is a DOGLCD+ULTRA_LCD+NEWPANEL so customize its pins within that block.	2017-03-03 21:22:21 -06:00
Scott Lahteine	98c7b682ca	General cleanup, const usage, var naming	2017-03-03 20:57:49 -06:00
jes	369bfc8a1e	Reduce code size (40b, or 166b with bilinear subdivision)	2017-03-03 20:36:32 -06:00
Scott Lahteine	0d13412105	Fix "Heating..." message	2017-03-03 12:12:51 -06:00
Scott Lahteine	5065636023	Merge pull request #5934 from thinkyhead/rc_advance_ed_ratio ... LIN_ADVANCE: Fixed E/D ratio option	2017-03-03 03:24:41 -06:00
divendres	75ad82baab	Update Catalan language	2017-03-02 20:40:06 -06:00
Scott Lahteine	34253497d4	Babysteps code tweak ... As suggested by https://github.com/MarlinFirmware/Marlin/pull/5887#issuecomment-283832163	2017-03-02 20:35:45 -06:00
Scott Lahteine	fb4aead2b1	Clean up and finish #5887	2017-03-02 20:16:29 -06:00
Scott Lahteine	b3e2bd6f29	Reduce E_D_ratio code	2017-03-02 01:00:37 -06:00
Sebastianv650	de6c40ed8f	Add option to fix E/D ratio ... Work around for slicers producing buggy gcode.	2017-03-02 01:00:37 -06:00
Scott Lahteine	eeb490221f	Remove BEEPER_PIN override in pins_RIGIDBOARD.h ... Resolves #5926. This override is no longer needed since the RAMPS LCD controller pins were fixed.	2017-03-01 18:26:29 -06:00
Roxy-3D	11e892bd84	Merge pull request #5887 from Roxy-3D/RCBugFix ... Double Click of Encoder Wheel Jumps to Z-BabyStepping	2017-03-01 17:15:02 -07:00
Scott Lahteine	cbeff12f8a	Merge pull request #5933 from teemuatlut/lcd_days_hours ... Fix formatting of SD print time hours above one day	2017-03-01 15:44:10 -06:00
Scott Lahteine	8a4e9d08a3	Merge pull request #5931 from thinkyhead/rc_core_endstop_fix ... Fix CoreYX / YZ / ZX endstop logic	2017-03-01 15:32:11 -06:00
teemuatlut	9175d16660	Fix formatting of print time hours above one day	2017-03-01 18:55:25 +02:00
Scott Lahteine	b6d9eb229f	Extend Core endstop commentary	2017-03-01 10:01:50 -06:00
Bob-the-Kuhn	c5e08e8761	CoreYX/YZ/ZX needs different endstop logic than CoreXY/YZ/XZ ... In the endstop testing section, add the "reverse" logic in addition to "normal" core handling. In CoreXY/YZ/XZ steppers rotating the same direction gives X movement. Opposing directions produces Y movement. In CoreYX/ZY/ZX this is reversed. Same = Y, Opposite = X. ---- Fixes the issue where the Y endstop was being checked when moving in the X direction, etc.	2017-03-01 09:40:24 -06:00
Scott Lahteine	c759c26cca	Make LCD_TIMEOUT_TO_STATUS configurable ... As suggested in https://github.com/MarlinFirmware/Marlin/issues/5570#issuecomment-283059 065	2017-02-28 19:02:50 -06:00
Michael Henke	47729918fc	enable ENSURE_SMOOTH_MOVES	2017-02-27 20:42:49 -08:00
Michael Henke	330b981912	created Configuration.h and Configuration_adv.h for the kossel mini sold by flsun	2017-02-25 21:31:37 -08:00
Colin Gilgenbach	48b7e0f8d8	Nozzle Wipe Vertical Zig-Zag ... - Add configuration support for zigzags in either the X or Y axis, for wipe pads significantly longer in one dimension. - Add configuration for default number of zig-zag triangles, vs. a magic number in `Marlin_main.cpp`. - Update description of auto nozzle wiping to match functionality	2017-02-25 21:52:43 -06:00
Scott Lahteine	f17b81b765	Add MAPPER_C2C3 to French language	2017-02-25 18:49:00 -06:00
Roxy-3D	7e607b06eb	Better comments on DOUBLE_CLICK_TIME_WINDOW	2017-02-23 13:13:57 -07:00
Scott Lahteine	34cba42104	Use PSTR for MSG_HEATING	2017-02-22 11:30:19 -06:00
Roxy-3D	584d147a02	fixup the indentation	2017-02-22 07:23:54 -07:00
Roxy-3D	e443e0e2a9	Fix scoping issues for double click to Z-Babystepping	2017-02-21 18:15:28 -07:00
Roxy-3D	17d1cd7c09	Double Click of Encoder Wheel Jumps to Z-BabyStepping	2017-02-21 18:08:19 -07:00
Roxy-3D	48d862377a	Double Click of Encoder Wheel Jumps to Z-BabyStepping	2017-02-21 18:04:31 -07:00
Scott Lahteine	cfdc189796	Merge pull request #5856 from thinkyhead/rc_fix_bad_comment ... Remove non-applicable comment on MANUAL_Z_HOME_POS	2017-02-20 17:54:30 -06:00
dot-bob	cd68380ce6	Add status_printf to print messages to the lcd status line. ... Also add a hotend indicator to the heating message displayed on the lcd status line.	2017-02-20 15:26:54 -06:00
Scott Lahteine	012aff6823	Merge pull request #5862 from thinkyhead/rc_fix_a_thing ... Finish reducing of ABL_BILINEAR_SUBDIVISION	2017-02-18 21:36:28 -06:00
Scott Lahteine	b9187020c4	Finish reducing of ABL_BILINEAR_SUBDIVISION	2017-02-18 20:01:19 -06:00
Scott Lahteine	e282b72151	Remove non-applicable comment on MANUAL_Z_HOME_POS	2017-02-18 05:14:43 -06:00
Scott Lahteine	57f92a4632	Apply DISTINCT_E_FACTORS to sync_from_steppers ... Followup to #5840	2017-02-18 04:36:41 -06:00
Scott Lahteine	4da8b1494b	Merge pull request #5854 from thinkyhead/rc_fixup_m600 ... M600 cleanup and bugfix	2017-02-18 04:27:13 -06:00
Scott Lahteine	dd02dba6e6	Merge pull request #5840 from MagoKimbra/rc_fix_lin_advanced_step_to_mm ... Fix steps_to_mm for active extruders	2017-02-18 04:25:53 -06:00
Scott Lahteine	6e0b3fcc08	Optimize M600 heater status LCD items	2017-02-18 04:08:00 -06:00
Scott Lahteine	44b4e116bd	Commentary / style in gcode_M600	2017-02-18 04:08:00 -06:00
Scott Lahteine	561904345f	Tweak config ordering for M600	2017-02-18 00:01:31 -06:00
Scott Lahteine	284d6de9da	Remove some old code comments	2017-02-17 15:25:56 -06:00
MagoKimbra	3685224c1a	Fix steps_to_mm for active extruders	2017-02-15 21:45:39 +01:00
Scott Lahteine	4578c573fe	Pause the print job timer while in M600	2017-02-15 05:29:34 -06:00
Scott Lahteine	bfe6f71794	Simplify filament_change_beep function	2017-02-15 05:29:34 -06:00
Scott Lahteine	8289ea1316	Use a short name for the filament "endstop"	2017-02-15 05:29:34 -06:00
Scott Lahteine	d9dcef8a87	Spacing, coding standards	2017-02-15 05:29:34 -06:00
Scott Lahteine	931914e679	Apply M600 updates to all configs	2017-02-15 05:29:34 -06:00
Roxy-3D	8bf0b496b9	Improve M600 with timeout, wait for heatup.	2017-02-15 05:29:34 -06:00
Tannoo	c40fe2113c	Fix for broken MBL ... LCD call was waiting forever, causing the system to hang.	2017-02-15 04:39:22 -06:00
Scott Lahteine	4d4745c0eb	Parenthesize some menu defines for safety	2017-02-14 23:12:27 -06:00
Scott Lahteine	47f9883b0f	Dynamic allocation for SDCARD_SORT_ALPHA	2017-02-14 21:37:25 -06:00
Scott Lahteine	a561bd5e3a	New feature: SDCARD_SORT_ALPHA	2017-02-14 21:37:24 -06:00
Scott Lahteine	c04d6b5aa6	Merge pull request #5829 from thinkyhead/rc_fix_isr_reentry ... Combine fixes for LIN_ADVANCE and temperature ISR	2017-02-14 20:36:58 -06:00
Scott Lahteine	467f01435f	Merge pull request #5816 from thinkyhead/rc_abl_virt_reduce ... Reduce memory use by ABL_BILINEAR_SUBDIVISION slightly	2017-02-14 08:41:44 -06:00
Scott Lahteine	97b6fb6381	Reduce / optimize LIN_ADVANCE code	2017-02-14 07:52:03 -06:00
Sebastianv650	271ced7341	Prevent re-entering of temperature ISR ... If Marlin is inside the temperature ISR, the stepper ISR is enabled. If a stepper event is now happening Marlin will proceed with the stepper ISR. Now, at the end of the stepper ISR, the temperatre ISR gets enabled again. While Marlin proceed the rest of the temperature ISR, it's now vulnerable to a second ISR call.	2017-02-14 07:52:03 -06:00
Sebastianv650	1b59766fcb	Cleanup position_float ... Hopefully fixes Marlin #5481	2017-02-12 13:09:06 +01:00
Scott Lahteine	a950c31e2d	Merge pull request #5815 from thinkyhead/rc_pulses_per_step ... Give encoder pulse/steps conditionals their own block	2017-02-12 04:14:00 -06:00
Scott Lahteine	7176de8605	Merge pull request #5814 from thinkyhead/hotend_loop_always ... Make HOTEND_LOOP more consistent, let compiler optimize it	2017-02-12 04:13:14 -06:00
Scott Lahteine	adec219ca5	Merge pull request #5811 from thinkyhead/fix_two_strings ... No space after X: or A: in M114 output	2017-02-12 04:11:51 -06:00
jes	eaa829b58c	Reduce memory use by ABL_BILINEAR_SUBDIVISION slightly	2017-02-12 04:09:48 -06:00
Scott Lahteine	1c99ca82d8	Give encoder pulse/steps conditionals their own block	2017-02-12 03:57:57 -06:00
Scott Lahteine	e44294bb4d	Make HOTEND_LOOP more consistent, let compiler optimize it	2017-02-12 02:50:38 -06:00
Scott Lahteine	701f4a6d9d	Merge pull request #5729 from Bob-the-Kuhn/guaranteed-BLTouch-detection ... guaranteed BLTouch detection	2017-02-12 01:13:35 -06:00
Scott Lahteine	c15b9a6a06	No space after X: or A: in M114 output	2017-02-12 00:10:03 -06:00
Scott Lahteine	e1702816f6	Fix SD_CHECK_AND_RETRY condition ... Addressing #5806	2017-02-11 23:55:56 -06:00
Scott Lahteine	1bc5be3bdf	Cast DELTA_PRINTABLE_RADIUS to float in sq() ... Addressing #5625	2017-02-11 23:28:39 -06:00
Bob-the-Kuhn	0369f97ec1	guaranteed BLTouch detection ... To guarantee that the 5mS pulse from a BLTouch is recognized you need to have the endstops.update() routine run twice in that 5mS period. At 200 steps per mm, my system has problems below a feedrate of 120 mm per minute. Two things were done to guarantee the two updates within 5mS: 1) In interrupt mode, a check was added to the temperature ISR. If the endstop interrupt flag/counter is active then it'll kick off the endstop update routine every 1mS until the flag/counter is zero. This flag/counter is decremented by the temperature ISR AND by the stepper ISR. 2) In poling mode, code was added to the stepper ISR that will make sure the ISR runs about every 1.5mS. The "extra" ISR runs only check the endstops. This was done by grabbing the intended ISR delay and, if it's over 2.0mS, splitting the intended delay into multiple smaller delays. The first delay can be up to 2.0mS, the next ones 1.5mS (as needed) and the last no less than 0.5mS. ========================================= BLTouch error state recovery If BLTouch already active when deploying the probe then try to reset it & clear the probe. If that doesn't fix it then declare an error. Also added BLTouch init routine to startup section	2017-02-11 12:01:34 -06:00
Scott Lahteine	1e4d4e5915	Fix typo in language_uk ... Thanks to @pavlus for this one	2017-02-10 15:34:31 -06:00
Scott Lahteine	7fe7a0c8be	Merge pull request #5793 from thinkyhead/rc_adjust_probe_output ... Adjust probe_pt() terminal output to respect probe z-offset	2017-02-09 23:05:02 -06:00
Scott Lahteine	633c253bc1	Merge pull request #5792 from thinkyhead/rc_default_dac_vals ... Default DAC values for RigidBoard V2	2017-02-09 22:56:03 -06:00
Florian Heilmann	7bbc31704c	Adjust probe_pt() terminal output to respect probe z-offset	2017-02-09 22:54:22 -06:00
Scott Lahteine	a245656db3	Merge pull request #5713 from gege2b/RCBF-French ... French translation : Added missing strings as well as missing accents	2017-02-09 22:43:56 -06:00
jaysonkelly	713931338a	Default DAC values for RigidBoard V2	2017-02-09 22:39:00 -06:00
Bob-the-Kuhn	ae706233a8	pinsDebug for 644/1284 & USB646/1286 families ... added conditional compilation for PWMs 1C & 3C add Teensyduino compatibility ========================================== changes per review - minor formatting changes 1) remove non-printable character at the end of line 687 2) split a really long comment into two lines 3) got rid of some trailing spaces ============================================ Made pinsDebug_Teensyduino.h the same between this PR and PR 5668 which is for a re-written pinsDebug.h file. The changes were: 1) added copyright @ GNU license header 2) a blank line crept in.	2017-02-09 07:24:02 -06:00
Gege2B	22dfcc9a71	French translation : Added missing strings as well as missing accents	2017-01-17 23:29:23 +01:00
Scott Lahteine	9b5515926a	Merge pull request #5696 from thinkyhead/rc_volumetric_default ... Allow enabling volumetric filament on config load	2017-01-14 05:48:51 -08:00
Robert Kirk	0d147ead66	Allow enabling volumetric filament on config load	2017-01-14 04:37:49 -08:00
AnHardt	fa26767efe	Replace all remaining 'boolean' with 'bool'	2017-01-13 13:03:52 +01:00
AnHardt	f6858d9974	Fix M110 without leading N ... Store N in the right variable. This is too rarely used. "mea culpa, mea culpa, mea maxima culpa"	2017-01-13 12:33:50 +01:00
Scott Lahteine	0c0c840ba8	Merge pull request #5683 from emartinez167/EMartinez-Changes ... Updates to some incorrectly ended strings in the Spanish translation	2017-01-12 07:49:15 -08:00
Kai	25dae3bccc	Update language_de.h ... Small corrections	2017-01-12 16:06:58 +01:00
emartinez167	7292145f4e	Fix for some wrong strings ... On last commit, some strings were ended with the incorrect character. This fixes it.	2017-01-12 22:35:04 +08:00
Scott Lahteine	93a9aa6b76	Merge pull request #5682 from thinkyhead/rc_spanish_jan ... Updates to Spanish language	2017-01-12 06:14:10 -08:00
Scott Lahteine	7a9c1a279b	Merge pull request #5681 from thinkyhead/rc_prevent_boot_loop ... Reset watchdog in SD init to prevent reboot	2017-01-12 06:13:56 -08:00
Scott Lahteine	e409c7f9e8	Merge pull request #5645 from esenapaj/From-microseconds-to-milliseconds ... From "microseconds" to "milliseconds"	2017-01-12 06:02:55 -08:00
emartinez167	020c6af7b0	Updates to Spanish language ... Add missing Spanish language definitions.	2017-01-12 05:53:39 -08:00
Hans Raaf	d29cc8f7bc	Reset watchdog in SD init to prevent reboot ... If the watchdog is enabled and bootscreen + SD card checks take too long, Marlin may hang at boot time because of the reset loop. We have this happen all the time with the Anet board if no SD card is inserted.	2017-01-12 05:33:38 -08:00
Scott Lahteine	7743849608	Merge pull request #5680 from thinkyhead/rc_configs_puhlease ... code_value_float tweak	2017-01-12 05:22:47 -08:00
Scott Lahteine	16357fbfdf	Merge pull request #5619 from Ocarthon/RCBugFix ... Disable SD Detect for K8400	2017-01-12 05:22:03 -08:00
Scott Lahteine	e57c0fce66	Move MOSFET changes above #include for RIGIDBOARD ... Correction to #5629	2017-01-12 04:46:49 -08:00
Scott Lahteine	c376f6a2cb	code_value_float tweak	2017-01-12 04:38:09 -08:00
Scott Lahteine	fb3c30e24c	Fix lcd_wait_for_homing causing menu to block ... As a showcase function for how to do waiting in the lcd menu, this function should be preserved.	2017-01-12 04:37:23 -08:00
Scott Lahteine	f8ae0fd29f	Merge pull request #5647 from manianac/RCBugFix-PrepareMenuFix ... Fix empty Prepare menu	2017-01-12 04:20:18 -08:00
Robert Kirk	aab5118c6a	Remove error causing break command ... Use index macro instead of e	2017-01-01 17:47:01 -05:00
esenapaj	d38e335272	From "microseconds" to "milliseconds" ... delay() is milliseconds	2017-01-02 01:19:33 +09:00
Philip Standt	8ae2bc7e2e	Disable SD Detect for K8400	2016-12-28 23:21:18 +01:00
Scott Lahteine	4061fca1ad	Sanity checks for FILAMENT_CHANGE_FEATURE and FILAMENT_RUNOUT_SCRIPT	2016-12-23 19:55:12 -08:00
Scott Lahteine	5ab7b91615	Comment on filament runout sensor config	2016-12-23 19:50:27 -08:00
Scott Lahteine	922c67f17d	Merge pull request #5588 from thinkyhead/rc_remove_biv25 ... Drop biv2.5 delta configurations	2016-12-23 19:14:50 -08:00
Scott Lahteine	8c6c048551	drop biv2.5 delta configurations	2016-12-23 18:56:07 -08:00
Scott Lahteine	92dbeebf40	Define ADV_NEVER, ADV_RATE	2016-12-23 18:43:23 -08:00
Robert Kirk	306c184b1a	Allow M600 when dryrun debugging	2016-12-21 20:30:51 -05:00
Scott Lahteine	fe2ea2906f	Merge pull request #5573 from thinkyhead/rc_unify_stepper_isr ... LIN_ADVANCE with unified stepper ISR	2016-12-21 02:53:32 -08:00
Sebastianv650	84c685f8b5	First draft of Unified Stepper / E Advance ISR	2016-12-21 01:34:39 -08:00
Scott Lahteine	83021d82c6	Merge pull request #5502 from AnHardt/symbol-strings ... Add symbol-strings	2016-12-21 00:51:59 -08:00
Scott Lahteine	036eccfd6e	Merge pull request #5572 from Kaibob2/patch-5 ... Update language_de.h	2016-12-21 00:50:40 -08:00
Scott Lahteine	b794b76836	Merge pull request #5567 from AnHardt/fix5194 ... Fix 5194	2016-12-21 00:49:52 -08:00
Scott Lahteine	451ba5df01	Merge pull request #5516 from esenapaj/Suppress-warning ... Suppress warning	2016-12-21 00:00:35 -08:00
Scott Lahteine	92dbc63949	Merge pull request #5571 from esenapaj/Update-Japanese-translation ... Update Japanese translation	2016-12-20 23:59:55 -08:00
Kai	ade72535c4	Update language_de.h ... Added tarnslation for ``` #define MSG_DEBUG_MENU #define MSG_PROGRESS_BAR_TEST ```	2016-12-21 08:57:39 +01:00
esenapaj	ab6b005867	Suppress warning	2016-12-21 09:13:03 +09:00
AnHardt	61f15ef7e7	Fix 5194 ... I have been a bit too radical in cleaning up this section.	2016-12-21 00:45:29 +01:00
esenapaj	60515ff700	Update Japanese translation ... ・Add new translation	2016-12-21 08:44:07 +09:00
Scott Lahteine	1e419655f3	Followup to #5550 - spacing before "mm"	2016-12-20 02:27:54 -08:00
Scott Lahteine	1a26ce1cdc	Merge pull request #5550 from FHeilmann/patch-2 ... Allow negative retract values in the LCD	2016-12-20 02:10:22 -08:00
Scott Lahteine	bec30c89e7	Merge pull request #5522 from esenapaj/Add-description-for-dual-x ... Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE	2016-12-20 01:31:53 -08:00
Scott Lahteine	7739c0affa	Change "+mm" to "mm" in most languages ... - Japanese and Chinese still need update	2016-12-20 01:16:51 -08:00
Scott Lahteine	1cba425308	Allow negative recover-swap length from LCD	2016-12-20 01:16:08 -08:00
Scott Lahteine	298a8c6a3c	Merge pull request #5561 from thinkyhead/rc_no_case_light ... Support for M335 case light "no case light"	2016-12-20 01:06:59 -08:00
Scott Lahteine	644f45cbd8	Merge pull request #5563 from akaJes/m600 ... FILAMENT_CHANGE_FEATURE allowed in idle mode	2016-12-20 01:06:10 -08:00
Scott Lahteine	0d2fc13516	Place "Level Bed" closer to "Auto Home"	2016-12-20 00:51:03 -08:00
Scott Lahteine	b031d28ebf	Encoder events should not skip stripes	2016-12-20 00:21:51 -08:00
Scott Lahteine	22881f38b9	Fix updating of "bool" menu items	2016-12-20 00:21:51 -08:00
Scott Lahteine	eb68715b94	No "Cooldown" menu if heaters are off	2016-12-20 00:21:51 -08:00
Jesus	4ed976b5ff	m600 fixes	2016-12-20 09:47:46 +02:00
Damien	4e2639942b	Support for M335 case light "no case light"	2016-12-19 23:23:08 -08:00
Scott Lahteine	18ba31e9b5	Add Debug Menu with LCD_PROGRESS_BAR_TEST as an example	2016-12-19 22:57:14 -08:00
Scott Lahteine	03af5961b0	Hide (or remove) custom character change on boot screen	2016-12-19 22:27:28 -08:00
Scott Lahteine	1642f5ed31	Add macro to some en strings	2016-12-19 22:27:28 -08:00
Scott Lahteine	dbb2d56c89	Correct comment on watchdog timer	2016-12-19 22:27:28 -08:00
Scott Lahteine	41a30923f3	Merge pull request #5559 from thinkyhead/rc_minimum_gcc_version ... Throw an error for gcc before 4.7	2016-12-19 19:50:44 -08:00
Scott Lahteine	6d6a1db6ec	Apply const to _EEPROM_writeData value param	2016-12-19 18:50:43 -08:00
Robert Kirk	f724ef5820	Have bed leveling status output current status, not requested.	2016-12-19 18:47:45 -08:00
Scott Lahteine	20218e553d	Merge pull request #5527 from MagoKimbra/rc_configuration_store_fix_size ... Fix size	2016-12-19 18:47:28 -08:00
Scott Lahteine	dcfbe2bd3c	Throw an error for gcc before 4.7	2016-12-19 18:30:51 -08:00
Scott Lahteine	82fde7df2e	Merge pull request #5512 from AnHardt/speed-compare-bbr ... Optimize handling of block_buffer_runtime()	2016-12-19 18:21:06 -08:00
Scott Lahteine	8986225752	Spacing, cleanup in speed_lookuptable.h	2016-12-19 14:52:45 -08:00
Scott Lahteine	e12c8e5cac	Split up thermistor tables	2016-12-19 14:47:54 -08:00
Florian Heilmann	a7334fd2a0	Allow negative retract values in the LCD ... This can already be done via G-Code, so adding the capability to the LCD should be straight forward.	2016-12-19 14:19:06 +01:00
AnHardt	292eb365c6	Optimize handling of block_buffer_runtime() ... millis_t is long - divisions take for ever. Return a kind of millisecond instead of microsecond - divided by 1024 instead of 1000 for speed. (2.4% error) That does not matter because block_buffer_runtime is already a too short estimation. Shrink the return-type.	2016-12-19 11:47:28 +01:00
esenapaj	6854f44bf2	Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE	2016-12-19 02:21:10 +09:00
Scott Lahteine	3f6f036f7c	Merge pull request #5524 from thinkyhead/rc_optional_dogm_splitup ... Report EEPROM data size, not final index	2016-12-16 18:55:48 -08:00
MagoKimbra	86ba7e4542	Fix size ... Fix size for writeData and readData. For bilinear grid 11 x 11 for example, size is 4 (float) x 11 x 11 = 484. uint8_t max is 255.	2016-12-16 14:49:33 +01:00
Scott Lahteine	f9f75c8016	Fix USE_RAW_KINEMATICS in prepare_kinematic_move_to	2016-12-15 23:15:38 -08:00
Scott Lahteine	87921f390a	Clarify what are "logical" positions in the planner	2016-12-15 23:15:38 -08:00
Scott Lahteine	a4f10f59c3	Write the E parameter length correctly	2016-12-15 23:15:38 -08:00
Scott Lahteine	2e904cb4f9	Merge pull request #5514 from esenapaj/Update-Japanese-translation ... Update Japanese translation	2016-12-15 21:38:40 -08:00
Scott Lahteine	0b6817e0f9	Merge pull request #5505 from android444/patch-4 ... Update for translations language_pl.h	2016-12-15 21:38:18 -08:00
Scott Lahteine	3bd76f60e4	Report EEPROM data size, not final index	2016-12-15 20:26:28 -08:00
Scott Lahteine	78d6d6e076	Merge pull request #5452 from thinkyhead/rc_save_your_mesh ... Save Bed Leveling to EEPROM	2016-12-15 20:23:01 -08:00
Scott Lahteine	0d0aa6c20d	Patch type for max_acceleration_mm_per_s2 save/restore	2016-12-15 20:05:42 -08:00
Scott Lahteine	d4f5418802	Merge pull request #5517 from esenapaj/Fix-for-PR-#5255 ... Fix for the PR #5255 (Case light menu (3rd attempt))	2016-12-15 20:01:22 -08:00
Scott Lahteine	fa7010b0a1	Merge pull request #5515 from esenapaj/Remove-unnecessary-tabs-and-spaces ... Remove unnecessary tabs and spaces	2016-12-15 19:58:32 -08:00
Scott Lahteine	6d7b1cdf6c	Add M421 for ABL Bilinear	2016-12-15 19:39:11 -08:00
Scott Lahteine	32e65dc429	Extend M420 to print state and, with V, the matrix / mesh	2016-12-15 19:39:11 -08:00
Scott Lahteine	d04258753b	Don't throw away the bed level matrix on G28	2016-12-15 19:21:18 -08:00
Scott Lahteine	8f0f225d10	Save ABL Planar Matrix to EEPROM	2016-12-15 19:21:15 -08:00
Scott Lahteine	e2429a9da1	Generalize Bed Leveling flag in EEPROM	2016-12-15 19:20:52 -08:00
Scott Lahteine	e42fd7813a	Save ABL Bilinear Grid to EEPROM	2016-12-15 19:20:48 -08:00
Scott Lahteine	492b68f8e3	Better EEPROM read/write error handling	2016-12-15 19:08:44 -08:00
Scott Lahteine	55722c09da	Use "UNPROBED" for un-probed bed_level_grid points	2016-12-15 19:08:44 -08:00
Scott Lahteine	2643404ac8	Throw an error in M420 if can't enable	2016-12-15 19:08:43 -08:00
Scott Lahteine	b1539394fd	Use planner.unapply_leveling to undo tilt in G29	2016-12-15 19:08:43 -08:00
Scott Lahteine	04636f78eb	Re-enable MBL/ABL after M48	2016-12-15 19:08:43 -08:00
Scott Lahteine	9b41638672	Minor tweak to G29 grid points	2016-12-15 19:08:42 -08:00
Scott Lahteine	daa2cad21f	Fix comment on G29 to include 'Z'	2016-12-15 19:08:42 -08:00
Scott Lahteine	8244fefcc2	Tweak call to reset_bed_level in G29	2016-12-15 19:08:42 -08:00
Scott Lahteine	0995a5d734	Fixup reset_bed_level	2016-12-15 19:08:42 -08:00
Scott Lahteine	1b2fb2bdc7	ABL_GRID_POINTS_* => ABL_GRID_MAX_POINTS_*	2016-12-15 19:08:41 -08:00
esenapaj	d486361c69	Fix for commented section of Config_RetrieveSettings()	2016-12-16 04:34:47 +09:00
esenapaj	88157ba529	Fix for the PR #5255 (Case light menu (3rd attempt))	2016-12-16 00:57:32 +09:00
esenapaj	069c6b38dd	Remove unnecessary tabs and spaces	2016-12-16 00:21:32 +09:00
esenapaj	9c8116aedf	Update Japanese translation ... ・Add new translation	2016-12-16 00:06:58 +09:00
AnHardt	57b1275cde	Add symbol-string to _de ... Add symbol-string for _de to reduce the frquencey of regenerating 'mappers' and 'fonts' with the new utf-system.	2016-12-15 14:37:18 +01:00
android444	3363d2c937	Update for translations language_pl.h	2016-12-14 17:32:33 +01:00
Scott Lahteine	06af3b62ba	Move HOLLOW_FRAME options to config_adv	2016-12-14 04:31:27 -08:00
Scott Lahteine	67ca6c7bfe	Codestyle tweaks to ultralcd.cpp	2016-12-14 04:20:33 -08:00
Scott Lahteine	8d9fcd8e6f	Merge pull request #5495 from AnHardt/autoadjusting_display-updates ... Adaptive screen updates for all kinds of displays	2016-12-14 04:16:26 -08:00
Scott Lahteine	77a360912d	Merge pull request #5491 from yhfudev/devel-rcbugfix-language-headers ... UTF-8 language header files	2016-12-14 02:23:09 -08:00
AnHardt	d0e24e0876	Adaptive screen updates for all kinds of displays ... The target here is to update the screens of graphical and char base displays as fast as possible, without draining the planner buffer too much. For that measure the time it takes to draw and transfer one (partial) screen to the display. Build a max. value from that. Because ther can be large differences, depending on how much the display updates are interrupted, the max value is decreased by one ms/s. This way it can shrink again. On the other side we keep track on how much time it takes to empty the planner buffer. Now we draw the next (partial) display update only then, when we do not drain the planner buffer to much. We draw only when the time in the buffer is two times larger than a update takes, or the buffer is empty anyway. When we have begun to draw a screen we do not wait until the next 100ms time slot comes. We draw the next partial screen as fast as possible, but give the system a chance to refill the buffers a bit. When we see, during drawing a screen, the screen contend has changed, we stop the current draw and begin to draw the new content from the top.	2016-12-13 18:44:34 +01:00
yhfudev	2dbd38ce16	tag the utf-8 strings	2016-12-13 11:54:35 -05:00
Scott Lahteine	94ffb58da7	Prevent retract un-hop at wrong height	2016-12-13 08:24:12 -08:00
Scott Lahteine	0772c8e55f	Merge pull request #5487 from thinkyhead/rc_easier_move_axis ... Rearrange Move Menu, Fix up Delta Calibration	2016-12-13 07:07:05 -08:00
Scott Lahteine	b2c8de856b	Merge pull request #5478 from AnHardt/stepspermm ... Replace ftostr62sign with ftostr62rj	2016-12-13 07:05:42 -08:00
Scott Lahteine	1fd8185d37	Merge pull request #5492 from thinkyhead/rc_fix_language_es ... Fix multiple definitions of message macros in the language-es.h	2016-12-13 06:57:52 -08:00
yhfudev	1cdffdede7	fix multiple definitions of message macros in the language-es.h	2016-12-13 06:48:38 -08:00
Scott Lahteine	b67f8cb499	Merge pull request #5490 from jbrazio/update-bqhp2 ... Update the bq Hephestos 2 example configuration	2016-12-13 05:04:24 -08:00
Scott Lahteine	93b2833347	Move Menu: Select axis first, resolution after	2016-12-13 03:11:14 -08:00
Scott Lahteine	48aa0f6475	Merge pull request #5475 from AnHardt/utf-mapper-tr ... utf8-mapper for Turkish	2016-12-13 03:03:22 -08:00
Scott Lahteine	b9ee0d7bd3	Merge pull request #5488 from thinkyhead/rc_fade_compiler_warn ... Patch fade_factor compiler warning	2016-12-13 03:00:47 -08:00
Scott Lahteine	641e0936d4	Patch up Delta Calibration Menu	2016-12-13 02:42:28 -08:00
Scott Lahteine	b4dbf4d18a	Non-reentrant "Moving..." screen to safely wait in LCD	2016-12-13 02:42:27 -08:00
Scott Lahteine	7b625e0048	Patch fade_factor compiler warning	2016-12-13 02:29:01 -08:00
Scott Lahteine	6fa8fd15e2	Add negative temperatures for Thermistor 1 ... Changes from #5485 by @AndKe	2016-12-13 02:06:16 -08:00
Scott Lahteine	2b5d424394	Use handle_reprapworld_keypad for keypad handling	2016-12-13 01:41:08 -08:00
Scott Lahteine	887ed73c9b	Expose delta_clip_start_height for use by others	2016-12-13 01:41:08 -08:00
João Brázio	3f75edb1d6	Updated bq Hephestos 2 example configuration	2016-12-13 09:26:07 +00:00
Daniel Martinez	b796e7031d	Update Aragonese translation	2016-12-12 17:36:33 -08:00
AnHardt	cd2b74e88d	Replace ftostr62sign with ftostr62rj ... `ftostr62sign()` is used only when displaing/editing Steps/mm. A sign is not needed - the value is always positive. Because the number part is long there is no't much place for the values name. With this PR the is one more char for the name possible.	2016-12-12 20:25:20 +01:00
AnHardt	795541f87e	utf8-mapper for Turkish ... The non utf8 version of turkish is a bit unhandy. Delete `language_tr.h` Rename `language_tr_utf.h` to `language_tr.h` Provide a propper utf8-mapper for Turkish and use it.	2016-12-12 15:56:59 +01:00
Scott Lahteine	7c71bb2900	Merge pull request #5471 from thinkyhead/rc_planner_report_m503 ... Patch to show E factors in M503	2016-12-11 17:47:41 -08:00
Scott Lahteine	39401b7472	Patch to show E factors in M503	2016-12-11 17:37:29 -08:00
Scott Lahteine	6b50230022	Merge pull request #5447 from thinkyhead/rc_update_dutch ... Dutch cleanup, ordering, placeholders	2016-12-10 22:13:20 -08:00
Scott Lahteine	2c97c11731	Merge pull request #5454 from thinkyhead/rc_fix_delta_g29 ... Fix G29 starting height on DELTA	2016-12-10 22:10:33 -08:00
Scott Lahteine	8239c45b30	Merge pull request #5448 from thinkyhead/rc_eeprom_bump ... EEPROM: Prolong life. Better support for `DISTINCT_E_FACTORS`.	2016-12-10 22:06:00 -08:00
Scott Lahteine	21ed43df5f	New Dutch terms	2016-12-10 21:59:45 -08:00
Scott Lahteine	4bc6536f54	Move to safe zone on DELTA if using do_blocking_move_to*	2016-12-10 21:28:24 -08:00
Scott Lahteine	6f389158d7	Compile less code with EEPROM off	2016-12-09 06:05:32 -08:00
Scott Lahteine	f2301a2a04	Add e-stepper count to EEPROM (for planner vars)	2016-12-09 06:05:31 -08:00
Scott Lahteine	53c9fca0f6	Only write to EEPROM when a byte changes	2016-12-09 06:05:31 -08:00
AnHardt	13eebd11cf	volatile_block_buffer_runtime_us ... `block_buffer_runtime_us` is mangled in the planner and in the stepper-ISR. So it needs to be volatile and interrupt protected.	2016-12-09 14:49:02 +01:00
Scott Lahteine	8383f35b40	Merge pull request #5445 from thinkyhead/rc_reduce_jerk_code ... Slightly shrink jerk and advance code	2016-12-09 02:54:03 -08:00
Gege2B	40453c1b9a	Update french translation (LIGHTS str)	2016-12-09 11:18:29 +01:00
Scott Lahteine	fc2fc828b3	Prettify LIN_ADVANCE code with the positive condition	2016-12-09 00:29:07 -08:00
Scott Lahteine	1929502e15	Add const to some variables	2016-12-09 00:29:06 -08:00
Scott Lahteine	2da4d22520	Pretty up ADVANCE code	2016-12-08 22:51:28 -08:00
Scott Lahteine	af024e1d7c	Pretty up coast / reverse jerk code	2016-12-08 22:50:25 -08:00
Scott Lahteine	3f3b5c86d8	Slightly shrink code for jerk-based reduction of safe_speed	2016-12-08 22:24:29 -08:00
AnHardt	87fe20b5f5	Simplify long_move() ... We are not really interested in, if there are blocks. All information we need is in `block_buffer_runtime_us`.	2016-12-09 00:13:35 +01:00
Scott Lahteine	574d9c7d3d	Merge pull request #5432 from Kaibob2/patch-2 ... Update language_de.h	2016-12-08 13:14:04 -08:00
Scott Lahteine	f089279263	Merge pull request #5431 from esenapaj/Suppress-warnings,-etc ... Suppress warnings, etc	2016-12-08 13:10:12 -08:00
Scott Lahteine	d92ccb230c	Merge pull request #5438 from AnHardt/patch-long_move ... Patch long_move()	2016-12-08 13:08:36 -08:00
AnHardt	706b240251	Patch long_move() ... While the last move in the planner_buffer is running it's duration is already subtracted from block_buffer_runtime_us.	2016-12-08 21:03:26 +01:00
esenapaj	a298a58684	Remove redundant "E"	2016-12-09 02:27:34 +09:00
Kai	390a6d976a	Update language_de.h ... #define MSG_ENDSTOP_ABORT doesn't fit in Display See https://github.com/MarlinFirmware/Marlin/issues/5401#issuecomment-265714487	2016-12-08 12:18:19 +01:00
esenapaj	e9393c3634	Suppress warnings, etc ... ・Suppress warnings ・Remove unused variable "did_update"	2016-12-08 17:47:59 +09:00
Scott Lahteine	da6a094424	Sanity-check inverting and pullups for Z probe and Z endstop ... `Z_MIN_ENDSTOP_INVERTING` must match `Z_MIN_PROBE_ENDSTOP_INVERTING` when using `Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN`. This is easy to overlook.	2016-12-08 00:12:19 -08:00
Scott Lahteine	3fb43c11fc	Fix compile error with LCD_I2C_VIKI	2016-12-07 23:29:45 -06:00
Scott Lahteine	aa241c63b3	Include M205 note in configurations	2016-12-07 14:45:44 -06:00
Scott Lahteine	c8a95ec514	Merge pull request #5413 from MagoKimbra/rc_fix_mesh ... Fix Mesh without Fade Height	2016-12-07 03:16:02 -06:00
Scott Lahteine	35ad9626f1	Merge pull request #5410 from thinkyhead/rc_polish_update ... Update Polish language, reduce filament change messages	2016-12-07 03:15:53 -06:00
Scott Lahteine	01e5d46ea7	Patch some planner compile errors	2016-12-07 02:26:24 -06:00
MagoKimbra	5383212a28	Fix Mesh without Fade Height	2016-12-07 09:23:42 +01:00
Scott Lahteine	dbe1dc1452	Merge pull request #5406 from Rigid3D/RCBugFix ... Turkish Translation Update	2016-12-07 00:56:08 -06:00
Scott Lahteine	4783a59249	Remove filament-change empty lines from languages	2016-12-07 00:53:03 -06:00
Scott Lahteine	1705099c3e	Save space by not defining unused filament change message lines	2016-12-07 00:53:03 -06:00
android444	9b1f4b514b	Update Polish language ... Translation of messages in English to Polish.	2016-12-06 22:28:33 -06:00
Robert Marko	84f7e1de04	Updates to Croatian language	2016-12-06 22:24:12 -06:00
esenapaj	08cdaaf19b	README and Version for 1.1.0-RCBugFix ... Sync with RC8	2016-12-07 10:43:58 +09:00
Mehmet Sutas	f4663cb677	Update language_tr_utf8.h	2016-12-07 00:21:56 +03:00
Mehmet Sutas	b4fd115d4e	Update language_tr.h	2016-12-07 00:20:07 +03:00
Scott Lahteine	83c5026db1	Ignore homing button when SD printing ... As suggested in #5404 by @android444	2016-12-06 14:22:34 -06:00
Scott Lahteine	312caef472	Merge pull request #5398 from thinkyhead/rc_croatian_cleanup ... Fix Croatian spacing, extra #endif	2016-12-06 03:22:19 -06:00
Scott Lahteine	46b65773ea	Fix Croatian spacing, extra #endif	2016-12-06 03:10:37 -06:00
Scott Lahteine	3f2faac9d1	Merge pull request #5388 from thinkyhead/rc_subdivide_bilinear ... Subdivide Bilinear Grid with Catmull Rom Splines	2016-12-05 20:28:50 -06:00
Scott Lahteine	b5b5edd9ad	Merge pull request #5394 from thinkyhead/rc_drop_board_99 ... Remove mystery-board 99	2016-12-05 20:28:35 -06:00
Scott Lahteine	c48901f355	Remove mystery-board 99	2016-12-05 20:16:50 -06:00
akaJes	d7b948610a	Experimental bilinear subdivision option	2016-12-05 20:11:24 -06:00
Scott Lahteine	6253b765aa	Merge pull request #5389 from thinkyhead/distribute_screen_updates ... Distribute GLCD screen updates in time	2016-12-05 20:08:33 -06:00
Scott Lahteine	b203901143	Merge pull request #5393 from AnHardt/Fix-auto_report_temperatures ... Fix auto_report_temperatures()	2016-12-05 19:38:23 -06:00
AnHardt	59a27ed27d	Fix auto_report_temperatures() ... The `auto_report_temperatures` needs a linefeed to be recognized by Repetier Host.	2016-12-06 01:26:44 +01:00
AnHardt	a6fbd4a5d8	Distribute GLCD screen updates in time ... Currently we draw and send the screens for a graphical LCD all at once. We draw in two or four parts but draw them directly behind each other. For the tested status screen this takes 59-62ms in a single block. During this time nothing else (except the interrupts) can be done. When printing a sequence of very short moves the buffer drains - sometimes until it's empty. This PR splits the screen update into parts. Currently we have 10 time slots. During the first one the complete screen is drawn. (60,0,0,0,0,0,0,0,0,0,0) Here i introduce pauses for doing other things. (30,30,0,0,0,0,0,0) or (15,15,15,15,0,0,0,0,0,0) Drawing in consecutive time slots prevents from lagging too much. Even with a 4 stripe display all the drawing is done after 400ms. Previous experiments with a even better distribution of the time slots like (30,0,0,0,0,30,0,0,0,0) and (15,0,15,0,15,0,15,0,0,0) did not feel good when using the menu, because of too much lag. Because of the previous PRs to speed up the display updates and especially reducing the difference between drawing 2 or 4 stripes, it now makes sense for the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER to go from 2 to 4 stripes. This costs about 1-2ms per complete screen update, but is payed back by having partial updates lasting only the half time and two additional brakes. Also ~256 byte of framebuffer are saved in RAM. 13:45:59.213 : echo: #:17 >:13 s:30; #:16 >:13 s:29; S#:33 S>:26 S:59 13:46:00.213 : echo: #:16 >:14 s:30; #:17 >:13 s:30; S#:33 S>:27 S:60 13:46:01.215 : echo: #:17 >:13 s:30; #:16 >:13 s:29; S#:33 S>:26 S:59 13:46:02.215 : echo: #:16 >:13 s:29; #:16 >:14 s:30; S#:32 S>:27 S:59 13:46:03.214 : echo: #:17 >:13 s:30; #:17 >:13 s:30; S#:34 S>:26 S:60 13:46:04.214 : echo: #:16 >:13 s:29; #:16 >:14 s:30; S#:32 S>:27 S:59 13:46:05.212 : echo: #:16 >:14 s:30; #:17 >:13 s:30; S#:33 S>:27 S:60 13:46:06.212 : echo: #:17 >:13 s:30; #:16 >:13 s:29; S#:33 S>:26 S:59 03:30:36.779 : echo: #:8 >:7 s:15; #:10 >:7 s:17; #:8 >:6 s:14; #:8 >:7 s:15; S#:34 S>:27 S:61 03:30:37.778 : echo: #:8 >:6 s:14; #:10 >:7 s:17; #:9 >:7 s:16; #:8 >:6 s:14; S#:35 S>:26 S:61 03:30:38.778 : echo: #:8 >:6 s:14; #:11 >:7 s:18; #:8 >:6 s:14; #:8 >:7 s:15; S#:35 S>:26 S:61 03:30:39.777 : echo: #:8 >:6 s:14; #:10 >:7 s:17; #:8 >:8 s:16; #:8 >:6 s:14; S#:34 S>:27 S:61 03:30:40.780 : echo: #:8 >:6 s:14; #:11 >:7 s:18; #:8 >:6 s:14; #:8 >:6 s:14; S#:35 S>:25 S:60 03:30:41.780 : echo: #:9 >:6 s:15; #:10 >:7 s:17; #:8 >:6 s:14; #:9 >:6 s:15; S#:36 S>:25 S:61 03:30:42.779 : echo: #:8 >:6 s:14; #:10 >:8 s:18; #:8 >:6 s:14; #:8 >:6 s:14; S#:34 S>:26 S:60 03:30:43.778 : echo: #:9 >:6 s:15; #:10 >:7 s:17; #:8 >:7 s:15; #:9 >:6 s:15; S#:36 S>:26 S:62 #: draw a stripe >: transfer a stripe s: sum of of draw and transfer for one stripe S#: sum of draws for a complete screen S>: sum of transfers for a complete screen S: time to draw and transfer a complete screen	2016-12-05 12:22:54 -06:00
Scott Lahteine	f882355994	Merge pull request #5318 from Sebastianv650/Account_for_LCD_improvements ... Account for LCD improvements in ENSURE_SMOOTH_MOVES	2016-12-05 11:23:58 -06:00
Scott Lahteine	20e834461d	Merge pull request #5385 from thinkyhead/rc_ftostr4sign_decimal ... Show decimal for small numbers in ftostr4sign	2016-12-05 11:22:45 -06:00
Scott Lahteine	b6b100c471	Merge pull request #5371 from thinkyhead/rc_extruders_can_differ ... Allow distinct factors for multiple extruders	2016-12-05 11:22:31 -06:00
Scott Lahteine	449d9cbf60	Add placeholders for Polish translatable strings	2016-12-05 10:37:00 -06:00
c64pl	643dc4b64e	Update language_pl.h ... Fixed translations	2016-12-05 10:37:00 -06:00
Scott Lahteine	0974b75fb6	Merge pull request #5386 from thinkyhead/rc_galician_update ... Galician language update.	2016-12-05 10:36:26 -06:00
Rafa Couto	2b9115330d	Galician language update.	2016-12-05 10:11:28 -06:00
Scott Lahteine	1f3e2440bc	Merge pull request #5175 from thinkyhead/rc_dualx_homing ... Unpark when using Z_SAFE_HOMING with Dual X	2016-12-05 10:02:56 -06:00
Scott Lahteine	d5bf1684fe	Implement as optional feature LCD_DECIMAL_SMALL_XY ... And reduce the function size to simplify	2016-12-05 09:26:05 -06:00
Guthenberg	bfb8d3b53e	Show more decimals in Display, if possible ... _123, -123, _-12, __-1 plus 1234, 12.3, -1.2	2016-12-05 09:05:46 -06:00
Scott Lahteine	1e30d1da47	Simplify itostr4sign ... - This function becomes obsolete if ftostr4sign is re-written.	2016-12-05 09:05:46 -06:00
Scott Lahteine	82a187acae	Merge pull request #5359 from AnHardt/update-de ... Add missing translations to lang-de	2016-12-05 07:31:28 -06:00
Scott Lahteine	4bafdf4b66	Support DISTINCT_E_FACTORS in LCD Motion Menu	2016-12-05 07:26:18 -06:00
Scott Lahteine	3391c785c6	Support for distinct E factors	2016-12-05 07:26:18 -06:00
Scott Lahteine	0dfe95eaba	Adjust formatting in Planner	2016-12-05 07:26:17 -06:00
Scott Lahteine	09587f7c0d	Fix rows error in DOGM	2016-12-05 07:14:11 -06:00
Scott Lahteine	c47e07d129	Fix Dual X software endstops	2016-12-05 06:51:41 -06:00
Scott Lahteine	4217e9653e	Adjust park code in tool_change	2016-12-05 06:51:41 -06:00
Scott Lahteine	b20405db31	Only DXC_AUTO_PARK_MODE should auto-move in tool_change	2016-12-05 06:48:43 -06:00
Scott Lahteine	ca24af7d5d	Dual X with home_z_safely is not parked	2016-12-05 06:43:26 -06:00
Scott Lahteine	0e15b4f434	Dual X set_axis_is_at_home can use x_home_pos for both	2016-12-05 06:43:26 -06:00
Scott Lahteine	54109dfaec	Reduce code size for Dual X un-park	2016-12-05 06:43:26 -06:00
Scott Lahteine	fe96f74db1	Use const arguments in Dual X helper functions	2016-12-05 06:43:26 -06:00
Scott Lahteine	41278c1e8b	Apply LOGICAL_POSITION to home positions on Dual X	2016-12-05 06:43:26 -06:00
Scott Lahteine	053fb55af6	Fix modes ordering in prepare_move_to_destination_dualx	2016-12-05 06:43:26 -06:00
Scott Lahteine	ee50928eee	Make LOGICAL and RAW position macros ternary-compatible	2016-12-05 06:43:26 -06:00
Scott Lahteine	56dd15c0ad	Use SET_INPUT for PS_ON_PIN in kill	2016-12-05 06:43:26 -06:00
Scott Lahteine	200cf3e9f9	Merge pull request #5381 from thinkyhead/rc_fix_fade_factor ... Properly apply fade_factor to MBL	2016-12-05 06:06:13 -06:00
Scott Lahteine	84ff78c1e3	Pass the fade factor to mbl.get_z	2016-12-05 03:01:51 -06:00
Scott Lahteine	85c2b96685	Apply const to MBL class methods	2016-12-05 02:50:59 -06:00
Scott Lahteine	c06161b773	Use apply_leveling, not MBL directly	2016-12-05 01:53:36 -06:00
Scott Lahteine	818f8b93d3	Merge pull request #5378 from thinkyhead/rc_duration_rj ... Better alignment of elapsed print time	2016-12-04 22:42:23 -06:00
Scott Lahteine	9d88a61d52	Better alignment of elapsed print time	2016-12-04 21:30:49 -06:00
Scott Lahteine	0b53d78046	Tweak editable items for debugging	2016-12-04 03:51:10 -06:00
Scott Lahteine	fccc97de6d	Save PROGMEM with string changes ... Unlike RAM-based strings, PROGMEM strings aren’t consolidated by the compiler.	2016-12-03 19:21:46 -06:00
AnHardt	e7fc353f08	Add missing translations to lang-de	2016-12-03 20:51:49 +01:00
Scott Lahteine	3f2cb376e0	Add placeholders for Bulgarian translation	2016-12-03 12:14:02 -06:00
Scott Lahteine	b22d37ba52	Merge pull request #5364 from thinkyhead/rc_croatian_update ... Update Croatian to include missing strings	2016-12-03 11:37:42 -06:00
Robert Marko	b796a687ca	Update Croatian to include missing strings ... Added all missing strings according to English	2016-12-03 11:15:41 -06:00
Scott Lahteine	255ed80164	Fix hotend offset report in M503	2016-12-03 10:17:35 -06:00
Petr Zahradník	c66f3ed34b	Update Czech	2016-12-03 10:32:34 +01:00
Scott Lahteine	cbf208ea1f	Merge pull request #5348 from Kaibob2/patch-1 ... Update language_de.h	2016-12-03 01:53:24 -06:00
Scott Lahteine	a2660cf688	Merge pull request #5347 from tnw513/fix-italian ... Added missing translations	2016-12-03 01:52:45 -06:00
Scott Lahteine	27dd5acc22	Fix set_led_color for BLINKM ... Follow-up to #5330	2016-12-03 01:51:11 -06:00
Kai	8530c32309	Update language_de.h ... Grammar corrections	2016-12-02 19:40:36 +01:00
Silvio Didonna	f1d5ffa211	Added missing translations	2016-12-02 18:49:39 +01:00
Scott Lahteine	b0361ebe4f	Merge pull request #5343 from thinkyhead/rc_invert_case_light ... Allow case light pin to be active low	2016-12-02 01:17:11 -06:00
Scott Lahteine	f60b4f8659	Allow case light pin to be active low	2016-12-01 23:32:34 -06:00
Scott Lahteine	3f4c02e42f	Merge pull request #5259 from Sebastianv650/Allow_UART-ISR_inside_Stepper ... Allow UART ISRs inside the stepper ISR	2016-12-01 23:17:42 -06:00
Scott Lahteine	d07229f185	Fix redraw in SD Card menus	2016-12-01 18:15:58 -06:00
Scott Lahteine	47b4b21308	Merge pull request #5331 from esenapaj/Fix-for-the-PR-#5072 ... Fix for the PR #5072 (Add predefined AUTO_FAN_PINs to pins files), etc	2016-12-01 13:37:02 -06:00
Scott Lahteine	8d14420331	Fix compile without ENABLE_LEVELING_FADE_HEIGHT	2016-12-01 11:37:24 -06:00
Scott Lahteine	415294801f	Merge pull request #5330 from thinkyhead/rc_rgb_led ... Support for an RGB LED using 3 pins	2016-11-30 14:14:00 -06:00
esenapaj	0909cf3d46	Adjust spacing	2016-11-30 19:39:39 +09:00
esenapaj	8e9e9c17b0	Follow-up the PR #5323 (Adding ukrainian language support) ... ・Update forgotten Configuration_adv.h of Felix\DUAL and K8400\Dual-head	2016-11-30 19:39:39 +09:00
esenapaj	d92ce8849b	Fix for the PR #5072 (Add predefined AUTO_FAN_PINs to pins files), etc ... ・Make descriptions the same as others	2016-11-30 19:39:38 +09:00
Scott Lahteine	e00b380489	Merge pull request #5323 from akaJes/lang-ua ... Adding ukrainian language support	2016-11-30 01:10:40 -06:00
Scott Lahteine	65c50e062e	Support for an RGB LED using 3 pins	2016-11-30 00:02:31 -06:00
esenapaj	3047f3c85c	Suppress warning	2016-11-30 00:32:56 +09:00
jes	f674246397	extend Configurations files	2016-11-29 15:04:36 +02:00
jes	c90191faaf	adding ukrainian laguage support	2016-11-29 14:49:45 +02:00
Sebastianv650	912704a0d8	Enable ISRs inside temperature ISR ... to capture chars at UART at 250000 baud.	2016-11-28 20:08:50 +01:00
Sebastianv650	f62f4006af	Account for LCD improvements in ENSURE_SMOOTH_MOVES ... .. and give the hint to try lower values if possible.	2016-11-28 17:44:19 +01:00
Scott Lahteine	092e949b58	Merge pull request #5169 from thinkyhead/rc_core_inverted ... Support for COREYX, COREZX, COREZY	2016-11-28 02:26:41 -06:00
Scott Lahteine	e9e4208ff1	Merge pull request #5274 from Sebastianv650/improve_smooth_moves ... Improvement for ENSURE_SMOOTH_MOVES	2016-11-28 02:22:08 -06:00
Scott Lahteine	c7935bb0d2	Merge pull request #5299 from thinkyhead/rc_bed_correction_fade ... Add a fade factor for mesh leveling	2016-11-28 02:07:51 -06:00
Scott Lahteine	a69b1ee691	Merge pull request #5313 from thinkyhead/rc_fix_menu_actions ... Keep drawing menu unless screen changes	2016-11-28 02:01:39 -06:00
Scott Lahteine	32ee3acf86	Merge pull request #5315 from thinkyhead/rc_fixup_material_menus ... Refine material heatup menu items	2016-11-28 01:46:51 -06:00
Scott Lahteine	c70a06daf1	lcd_save_previous_menu => lcd_save_previous_screen	2016-11-28 01:46:18 -06:00
Scott Lahteine	13ea43cc8d	Only exit menu handler when the screen changes	2016-11-28 01:46:18 -06:00
Scott Lahteine	f45b6a7762	Merge pull request #5314 from thinkyhead/case_light_menu_fix ... Fix and optimize case-light code	2016-11-28 01:45:27 -06:00
Scott Lahteine	59fafb93b2	Merge pull request #5304 from AnHardt/pixel-shifting ... MENU_HOLLOW_FRAME for the menu screens	2016-11-28 01:41:47 -06:00
Scott Lahteine	0951d385ce	Don't set heater temperature above its maximum	2016-11-28 01:37:24 -06:00
Scott Lahteine	c9193e856d	Limit preheat parameters based on all nozzles	2016-11-28 01:37:24 -06:00
Scott Lahteine	bb4529f7d2	PLA / ABS => Material 1 / 2	2016-11-28 01:37:24 -06:00
Scott Lahteine	61437d988a	Fix and optimize case-light code	2016-11-28 01:34:52 -06:00
AnHardt	7a9fa78822	MENU_HOLLOW_FRAME for the menu screens ... MENU_HOLLOW_FRAME for the menu screens and some pixel shifting to optimize the look with tall fonts. (cn)	2016-11-27 22:59:05 +01:00
AnHardt	24ca1a6289	Not more then 4 stripes for u8g-devices ... To optimise speed. Costs well invested 128Byte of RAM.	2016-11-26 19:08:33 +01:00
Scott Lahteine	aee71c543e	Minor formatting in language.h	2016-11-26 06:53:52 -06:00
Scott Lahteine	05d8d189f6	Adjust spacing in utf_mapper.h	2016-11-26 06:53:52 -06:00
Scott Lahteine	5460a529da	Add option DOGM_SPI_DELAY_US	2016-11-26 06:53:52 -06:00
Scott Lahteine	71842b6a17	Apply const to LCD arguments and locals	2016-11-26 06:53:52 -06:00
Scott Lahteine	b1abd7edef	Optimize graphical display with selective rendering	2016-11-26 06:53:52 -06:00
AnHardt	b91fab2d7d	Fix USE_BIG_EDIT_FONT	2016-11-26 13:50:25 +01:00
Scott Lahteine	4cd73e183d	Hide hidden files and folders	2016-11-26 06:26:28 -06:00
Scott Lahteine	f6f77d34a1	Add a fade factor for mesh leveling	2016-11-26 03:41:26 -06:00
AnHardt	75fdcc14b7	Activate font and mapper for el-gr	2016-11-26 02:30:37 +01:00
AnHardt	a0004e7cd3	Change font decent to -1 for tt and gr ... For speeding up font drawing unify font decent. Tr and Gr have ben the only fonts with a font decent of -2. Sorry for some, a bit compressd, but hopefully still readeble symbols.	2016-11-26 02:29:23 +01:00
Scott Lahteine	307f263f89	Merge pull request #5292 from esenapaj/Update-Japanese-translation ... Update Japanese translation	2016-11-25 16:56:49 -06:00
esenapaj	7070143042	Update Japanese translation ... ・Add new translation	2016-11-24 21:10:40 +09:00
esenapaj	ef97645002	Follow-up the PR #5255 (Case light menu (3rd attempt))	2016-11-24 19:42:05 +09:00
Scott Lahteine	2a9b3376a9	Merge pull request #5289 from thinkyhead/rc_which_menu_actions ... Drop "static" keyword in ultralcd.cpp function declarations	2016-11-23 23:04:05 -06:00
Scott Lahteine	b97dafe4b8	Drop "static" keyword in ultralcd.cpp function declarations	2016-11-23 20:43:01 -06:00
Scott Lahteine	2e966f8e5b	Patch Capabilities Report for "PROGRESS"	2016-11-23 19:31:46 -06:00
Scott Lahteine	f60321d3e3	Merge pull request #5284 from thinkyhead/rc_turkish_update ... Turkish update (squashed)	2016-11-23 14:57:52 -06:00
Mehmet Sutas	a26668b10c	Add UTF8 Turkish Translation	2016-11-23 14:19:16 -06:00
Mehmet Sutas	61aa796307	Added Human Readable Comments	2016-11-23 14:19:16 -06:00
Mehmet Sutas	6fb9c6fe07	Follow-up for #5167 Turkish Language ... Add check for Turkish Font before setting better font for graphic displays	2016-11-23 14:19:15 -06:00
Scott Lahteine	d891324830	Merge pull request #5258 from mosh1/mbl_speed_fix ... Fix z feedrate value when doing mesh bed leveling. probe feedrate use…	2016-11-23 14:15:01 -06:00
Scott Lahteine	7f8133a51f	Merge pull request #5255 from Kaibob2/CaseLightMenu ... Case light menu (3rd attempt)	2016-11-23 13:46:33 -06:00
Kai	e9b42f4f47	Update language_de.h	2016-11-23 19:29:19 +01:00
Kai	0c341f0c50	Added Menu entry for Case light	2016-11-23 19:29:15 +01:00
Scott Lahteine	3bc2273ac9	Comment M540	2016-11-21 18:08:00 -06:00
Scott Lahteine	14b74181f5	Merge pull request #5179 from thinkyhead/rc_TMC2130 ... TMC2130 "Silent StepStick" support	2016-11-21 14:10:52 -06:00
Scott Lahteine	bb2114a060	Merge pull request #5264 from thinkyhead/rc_delta_safe_zone ... Add an option for delta to home to the top	2016-11-21 13:56:44 -06:00
Scott Lahteine	38466b1d2f	Merge pull request #5271 from esenapaj/Fix-for-the-PR-#5267 ... Fix for thePR #5267 (Introduce a +1234.56 format for over 999 steps/mm)	2016-11-21 13:55:56 -06:00
Scott Lahteine	9b96a4a53b	Merge pull request #5246 from thinkyhead/rc_some_cleanup ... Minor stepper cleanup	2016-11-21 13:55:25 -06:00
Sebastianv650	8190483eeb	Improvement for ENSURE_SMOOTH_MOVES ... Instead of waiting for a single long block, compare the complete block buffer runtime for the long_move() check.	2016-11-21 17:58:24 +01:00
esenapaj	da67037550	Fix for thePR #5267 (Introduce a +1234.56 format for over 999 steps/mm) ... ・Fix memory leak	2016-11-21 22:31:01 +09:00
Scott Lahteine	0f891e848b	Merge pull request #5268 from esenapaj/Update-Japanese-translation ... Update Japanese translation	2016-11-21 03:18:36 -06:00
esenapaj	190a04c467	Update Japanese translation ... ・Change translation for 16 width LCD	2016-11-21 17:51:43 +09:00
esenapaj	7b836a4000	Introduce a +1234.56 format for over 999 steps/mm	2016-11-21 17:45:07 +09:00
Scott Lahteine	3e0376b45e	Reorder M114 and M119 gcode cases	2016-11-21 00:52:19 -06:00
Scott Lahteine	644fac5d34	Reduce all stepper_indirection init code with macros	2016-11-21 00:52:18 -06:00
Scott Lahteine	4e4f37b6c2	Code formatting for TMC and L6470 config options	2016-11-21 00:52:18 -06:00
Scott Lahteine	127e21ae00	Extend M122 for all steppers	2016-11-21 00:52:18 -06:00
Scott Lahteine	bf5f5f44cc	Make TMC2130 init code auto-configure ... Simply apply enabled settings instead of requiring users to edit stepper_indirection.cpp	2016-11-21 00:52:17 -06:00
Moritz	d67c1d825f	Add TMC2130 support	2016-11-21 00:17:45 -06:00
Scott Lahteine	11effeee2c	Add an option for delta to home to the top	2016-11-20 23:12:07 -06:00
Sebastianv650	50059690e0	Allow UART ISRs inside the stepper ISR ... If the stepper ISR takes too long, chars are lost which leads to serial communication errors like "Line number not +1" or "Wrong checksum". In worst case, the printer can even do crazy moves. With this changes, UART interrupts are handled inside the stepper ISR. This way, no chars should be lost.	2016-11-20 13:09:12 +01:00
Moshen Chan	29b174bfb9	Fix z feedrate value when doing mesh bed leveling. probe feedrate uses XY_PROBE_SPEED	2016-11-19 16:34:41 -08:00
AnHardt	88b38eafd8	Endstop interrupt refinement ... At the start of a move, check if the endstops are already triggered. The 'change' interrupts will not see a change if already triggered.	2016-11-19 13:30:49 +01:00
Scott Lahteine	79c8591192	Merge pull request #5253 from thinkyhead/rc_smooth_move_ex-lax ... Ensure smooth print moves even with LCD enabled	2016-11-19 01:38:41 -06:00
Scott Lahteine	0215cacb30	Merge pull request #5247 from esenapaj/Re-follow-the-PR-#4634 ... Re-follow the PR #4634 (Set language display charset in language.h)	2016-11-19 01:32:40 -06:00
Scott Lahteine	2cc32d85a3	Adjust ENSURE_SMOOTH_MOVES coding style	2016-11-19 01:28:48 -06:00
Scott Lahteine	072541f286	Update ENSURE_SMOOTH_MOVES in all configs	2016-11-19 01:28:47 -06:00
Sebastianv650	de89dc9f04	Ensure smooth print moves even with LCD enabled ... lcd_update can take so much time that the block buffer gets drained if there are only short segments. This leads to jerky printer movements for example in circles and a bad print quality. This change implements a simple check: Only if the block currently executed is long enough, run lcd_update. This also means the printer will not show actual values on the LCD nor will it respond to buttons pressed. A option that keeps the menu accessible is also available. Aditionaly, slow down if a block would be so fast that adding a new block to the buffer would take more time. In this case, the buffer would drain until it's empty in worst case.	2016-11-19 01:28:47 -06:00
Scott Lahteine	87b6b19256	Patch CASE_LIGHT typo	2016-11-18 23:49:12 -06:00
Scott Lahteine	0be6167f14	Merge pull request #5250 from CONSULitAS/RCBugFix_K8200_backinsync_2016-11-18 ... K8200: Example configuration back in sync	2016-11-18 22:49:18 -06:00
Scott Lahteine	eb714ee873	Move dummy thermistor opts, fix redundant sensor comment	2016-11-18 22:24:48 -06:00
Scott Lahteine	7a99c6ce4f	Reformat temp sensor listing	2016-11-18 22:24:47 -06:00
Scott Lahteine	181cdb3cfe	Move GCode list above include lines	2016-11-18 22:24:46 -06:00
Scott Lahteine	25d0c167bd	More detailed static_assert messages	2016-11-18 22:24:46 -06:00
Scott Lahteine	eb120e518c	Followup to new endstop interrupts feature ... - Fix typos, verbiage - Fix naming of `setup_endstop_interrupts` - Some formatting, indentation, spacing	2016-11-18 21:53:45 -06:00
Scott Lahteine	832fe284b4	Merge pull request #5184 from AnHardt/endstop_interrupts ... Introduce endstop interrupts	2016-11-18 20:50:24 -06:00
CONSULitAS	cbae44df64	K8200: Example configuration back in sync ... Configuration.h: back in sync, new features configured Configuration_adv.h: back in sync, new features configured README.md: text updated	2016-11-18 22:55:02 +01:00
esenapaj	5db3738fe7	Re-follow the PR #4634 (Set language display charset in language.h)	2016-11-18 17:44:49 +09:00
Scott Lahteine	6eb6f12c64	Patch up some language formatting	2016-11-18 01:16:58 -06:00
Bo Herrmannsen	8cffa60cc5	Update to Danish language 10/11-2016	2016-11-18 01:16:57 -06:00
Scott Lahteine	98600e1433	Minor stepper cleanup	2016-11-18 01:15:57 -06:00
Florian Heilmann	d08867986e	Add autotemp capabilities to M104 ... This allows M104 to pass the F and B parameters to enable autotemp as well	2016-11-17 11:28:19 -06:00
Sebastianv650	c11b2bb777	Bugfix LIN_ADV ... Advance has nothing todo with Z_AXIS, strange copy&paste error?	2016-11-17 11:28:19 -06:00
Scott Lahteine	ee0765e872	Merge pull request #5233 from esenapaj/Update-Japanese-translation ... Update Japanese translation	2016-11-17 03:38:19 -06:00
Scott Lahteine	2330619da0	Merge pull request #5191 from petrzjunior/const ... Replace const bool with #define for consistency	2016-11-17 03:37:32 -06:00
esenapaj	b278b7a395	Update Japanese translation ... Only adjust spacing	2016-11-17 09:05:51 +09:00
Petr Zahradník junior	d7ce5d271b	Replace const bool with #define for consistency	2016-11-16 18:55:21 +01:00
Scott Lahteine	d63230d73e	Merge pull request #5192 from Kaibob2/patch-7 ... Printer Stats / Completed prints line doesn't fit in display (when german)	2016-11-16 00:16:36 -06:00
Scott Lahteine	548b45026d	Merge pull request #5214 from Sebastianv650/RCBugFix_planner_opt ... Save some cycle inside the planner	2016-11-16 00:06:55 -06:00
Scott Lahteine	5d23e52d75	Merge pull request #5228 from thinkyhead/rc_keep_last_mix ... Fix DIRECT_MIXING_IN_G1 to preserve the previous mix	2016-11-15 19:12:01 -06:00
Scott Lahteine	db47aa983d	Merge pull request #5226 from mtowara/RCBugFix ... bump -std in Makefile to c++11	2016-11-15 16:13:32 -06:00
Scott Lahteine	99b0c1fe56	Fix DIRECT_MIXING_IN_G1 to preserve the previous mix	2016-11-15 16:12:26 -06:00
Markus Towara	23a675f621	reduce binary size of .hex ... still a few bytes bigger than with arduino but nothing major	2016-11-15 21:57:15 +01:00
Markus Towara	5b6e2cecf5	bump c/c++ standard to gnu11 ... needed for constexpr	2016-11-15 21:54:12 +01:00
Scott Lahteine	410657b050	Fix G30 with limits, print correct probe XY	2016-11-15 14:10:28 -06:00
AnHardt	f3eee02596	Introduce endstop interrupts ... If ENDSTOP_INTERRUPTS_FEATURE is enabled this tries to set up interrupt routines for all used endstop pins. If this worked without errors, `endstops.update()` is called only if one of the endstops changed its state. The new interrupt routines do not really check the endstops and react upon them. All what they do, is to set a flag if it makes sense to call the endstop test we are used to. This can be used on: * ARM (DUE) based boards - all pins can raise interrupts, * RAMPS - all 6 endstop pins plus some other on EXT-2 can raise interrupts, * RAMPS based boards - as long the designers did not change the pins for the endstops or at least left enough, * all boards, if there are enough pins that can raise interrupts, and you are willing/able to swap with pins dedicated to other purpose.	2016-11-15 12:07:41 +01:00
Sebastianv650	e3ffb58fbd	Save some cycle inside the planner ... planner.h: fan speed is used to set integer variables, so no need for long. Basicaly a byte should be enough for all the fan things, as it's 0-255? planner.cpp: Save some float multiplications. We could squeeze out even more by defining feedrate_percentage, saved_feedrate_percentage and flow_percentage as float instead of int. Everytime they are used in the time-critical planner, they are casted to float and multiplied by 0.01. Not done jet, as they are used in LCD menu functions I don't know well enough.	2016-11-13 13:34:12 +01:00
Scott Lahteine	665b7f3893	Merge pull request #5212 from thinkyhead/rc_mixing_faster ... Store mix factors as reciprocals and multiply	2016-11-12 18:47:11 -06:00
Scott Lahteine	60cc9342a4	Merge pull request #5188 from thinkyhead/rc_extended_host_support ... Extended host support: M155 Auto temp report, M115 capabilities	2016-11-12 15:38:06 -06:00
Scott Lahteine	f663220e87	Store Mix factors as reciprocals and multiply	2016-11-12 15:19:18 -06:00
Scott Lahteine	ea3c08d249	Merge pull request #5186 from esenapaj/Follow-up-the-PR-#5167-etc ... Follow up the PR #5167 (Add Turkish Language) again, etc	2016-11-12 13:11:54 -06:00
Scott Lahteine	c488378532	Merge pull request #5205 from Sebastianv650/RCBugFix_stepperpatch ... Remove useless line from stepper ISR	2016-11-12 12:43:07 -06:00
Michael Neumann	8bdf303da0	Update pins_MEGATRONICS_3.h	2016-11-12 12:26:07 +01:00
Michael Neumann	3890366c83	Update pins.h	2016-11-12 12:25:45 +01:00
Michael Neumann	c0d45ca7f2	Update boards.h	2016-11-12 12:24:47 +01:00
Sebastianv650	cdc18f8c22	Remove useless line from stepper ISR ... The flag is already set inside planner.get_current_block(). Doing it twice isn't making it better..	2016-11-11 19:35:03 +01:00
Kai	8e8b4398f3	Printer Stats / Completed prints line doesn't fit in display (when german)	2016-11-09 22:03:25 +01:00
Scott Lahteine	b31a07e261	Stateful M355 with separate P parameter	2016-11-09 03:28:18 -06:00
Scott Lahteine	3c9a838651	Extended capabilities report in M115	2016-11-09 02:32:58 -06:00
Scott Lahteine	68b866b5dd	Add M155 - Auto-report temperature with interval	2016-11-09 02:32:58 -06:00
Scott Lahteine	68b46fb2c9	Allow send to i2c address 0 (broadcast)	2016-11-08 17:54:55 -06:00
Scott Lahteine	75bfde9945	M155=>M260, M156=>M261	2016-11-08 17:54:54 -06:00
esenapaj	2ae72b0491	Follow up the PR #5167 (Add Turkish Language) again, etc ... ・Update forgotten K8400\Dual-head\Configuration.h ・Adjust spacing	2016-11-09 06:31:21 +09:00
Scott Lahteine	06f2282f82	Merge pull request #5176 from thinkyhead/rc_filchange_feedback ... Give instant feedback for filament change	2016-11-07 12:11:54 -06:00
Scott Lahteine	dcfd7c69e8	Merge pull request #5163 from nzinov/RCBugFix ... Improve G30 probing command - add optional arguments	2016-11-07 11:37:13 -06:00
Scott Lahteine	e765eebfb0	Patch spacing in bilinear grid report	2016-11-07 04:08:25 -06:00
Scott Lahteine	7780052fb3	Give instant feedback for filament change	2016-11-07 03:48:16 -06:00
esenapaj	24e3f7abe7	Update Turkish translation ... ・Add new translation	2016-11-07 04:59:18 +09:00
esenapaj	be48792e9c	Follow up the PR #5167 (Add Turkish Language), etc ... ・Remove all the #ifndef ・Follow the PR #4603 (Strip never-translated strings from language files) ・Follow the PR #4634 (Set language display charset in language.h) ・Follow the PR #4936 (Put max_jerk vars in array, clean up jerk code) ・Adjust spacing	2016-11-06 23:59:02 +09:00
Scott Lahteine	1864b282c5	Implement reversed CORE options	2016-11-05 23:47:51 -05:00
Scott Lahteine	e3c8318504	Add reversed CORE options	2016-11-05 23:47:46 -05:00
Rigid3D	2327764980	Add Turkish Language	2016-11-05 21:06:16 -05:00
Nikolay Zinov	dea00bbcf1	improve G30 probing ... Add optional parameters X, Y for probe point S sets stowing on and off	2016-11-05 13:22:45 +03:00
Scott Lahteine	00662b8635	Minor babystep cleanup patches	2016-11-03 23:31:45 -05:00
Scott Lahteine	cad792e702	Reduce code for invariant lcd_detected	2016-11-03 23:31:45 -05:00
Scott Lahteine	b23d255491	Move macros above Stepper::babystep	2016-11-03 23:31:45 -05:00
Scott Lahteine	cc57d46158	Fix set_position for CoreYZ	2016-11-03 23:31:45 -05:00
Scott Lahteine	0269347682	Merge pull request #5141 from thinkyhead/rc_old_slowdown_what ... OLD_SLOWDOWN does nothing, so remove it	2016-11-03 23:30:43 -05:00
Scott Lahteine	e92e2b2446	Merge pull request #5144 from Sebastianv650/RCBugFix_LIN_ADV_wipe ... Account for wipe moves	2016-11-03 23:19:25 -05:00
Scott Lahteine	176aeafc19	Don't define bilinear_line_to_destination on kinematic setups	2016-11-03 14:10:07 -05:00
Sebastianv650	d448500643	Account for moves with negative E movements ... Added a rule so that LIN_ADVANCE isn't used for moves with negative E movements (de_float will be negative in this cases). I also added a more detailed comment to make it more clear what the if statement does.	2016-11-03 17:01:17 +01:00
Scott Lahteine	236853df22	Corrections to bilinear_line_to_destination ... - Allow more than 9x9 probe points - Account for the probe starting position	2016-11-03 04:43:59 -05:00
Scott Lahteine	0115e495fe	Fix up Dual X switch blocks	2016-11-02 21:38:50 -05:00
Scott Lahteine	2495ab7af2	Make dual_x_carriage_mode an enumeration	2016-11-02 21:38:49 -05:00
Scott Lahteine	d6c36f5bb9	Fix Z raise with DXC_AUTO_PARK_MODE	2016-11-02 21:36:50 -05:00
Scott Lahteine	0c79553fc5	Cast int to AxisEnum for some accessors	2016-11-02 17:42:24 -05:00
Scott Lahteine	adbf1f7dca	Add M355 to the GCodes list.	2016-11-02 16:43:52 -05:00
Scott Lahteine	63efc10599	Merge pull request #5134 from thinkyhead/rc_bilinear_split_lines ... Split cartesian moves on grid boundaries with bilinear ABL	2016-11-02 16:14:55 -05:00
Scott Lahteine	12167bc8f3	OLD_SLOWDOWN does nothing, so remove it	2016-11-02 01:28:19 -05:00
esenapaj	c8c1a28f6f	Follow-up the PR #5089 (Centralize click-handling in the LCD loop) ... bool feedback is no longer used	2016-11-02 08:36:02 +09:00
esenapaj	c3a105186d	Follow-up the PR #5133 (M355 Case light) ... ・Add CASE_LIGHT_PIN into pinsDebug.h	2016-11-02 00:31:50 +09:00
Scott Lahteine	ee5b8d6dc8	Split moves on grid boundaries with bilinear ABL on cartesian	2016-11-01 08:25:47 -05:00
Scott Lahteine	66744a6076	Merge pull request #5133 from thinkyhead/rc_M355_case_light ... M355 Case light	2016-11-01 07:51:27 -05:00
Scott Lahteine	955d14acb0	Patch photo pin code style	2016-11-01 06:30:14 -05:00
Stanley	ab3f966f5f	Case light G-code M355 ... implemented G-Code M355 into Marlin	2016-11-01 06:30:14 -05:00
Scott Lahteine	8b44413498	Merge pull request #5124 from Sebastianv650/RCBugFix_LIN_ADV-Patch ... BugFix for incorrect E-speed calculation	2016-11-01 05:13:17 -05:00
Scott Lahteine	f418e82b15	Remove redundant definition of EN_C	2016-11-01 05:10:07 -05:00
Sebastianv650	f9bea7968f	BugFix for incorrect E-speed calculation ... The extrusion speed was wrong due to a not high enough precision of esteps to XY steps, therefore now the target float values are used to calculate the ratio between XY movement and extrusion speed. The e_speed_multiplier8 was replaced by an absolute multiplier called abs_adv_steps_multiplier8, therefore one multiplication and bitshift can be saved inside the stepper ISR. Due to this, also extruder_advance_k is better suited inside the planner and not the stepper files any more.	2016-11-01 08:08:47 +01:00
Bob-the-Kuhn	c20b4098be	2 bug fixes & some minor changes ... see detailed description in PR #5118	2016-11-01 01:29:41 -05:00
Scott Lahteine	fa6bf12697	Merge pull request #5118 from thinkyhead/rc_expanded_M43 ... Enhancements to M43 pins debugging	2016-10-31 08:29:53 -05:00
Scott Lahteine	3a107e280d	Developer note in pins_MIGHTYBOARD_REVE.h	2016-10-31 08:22:39 -05:00
Scott Lahteine	85e307dcd8	No FAN0_PIN	2016-10-31 08:08:03 -05:00
Scott Lahteine	ff3a8ca0d1	Use NUM_DIGITAL_PINS instead of custom DIO_COUNT	2016-10-31 08:08:03 -05:00
Scott Lahteine	04a1fac029	Some cleanup to M43	2016-10-31 08:08:03 -05:00
Scott Lahteine	24f6612551	Reduce and optimize endstop_monitor code	2016-10-31 08:08:03 -05:00
Scott Lahteine	b4444e91ae	Reduce code and build size of PWM_details	2016-10-31 08:08:02 -05:00
Scott Lahteine	dbe414ef03	Squash redundant code in PWM_status	2016-10-31 08:08:02 -05:00
Scott Lahteine	af26d22741	Clean up some spacing and semantics	2016-10-31 08:08:02 -05:00
Bob-the-Kuhn	81397d7a9a	EXTRUDER_x_AUTO_FAN name change to Ex_AUTO_FAN ... I stumbled across a name change that'll be used a lot so I'm updateing the name list.	2016-10-31 08:08:02 -05:00
Bob-the-Kuhn	c7f1f0dae6	Add endstop monitor & make pins report pretty	2016-10-31 08:08:02 -05:00
Scott Lahteine	d567b426d5	Merge pull request #4894 from thinkyhead/rc_mightyboard_rev_e ... Mightyboard Revision E preliminary support	2016-10-31 08:01:41 -05:00
Scott Lahteine	43df9ace4e	Merge pull request #5110 from thinkyhead/rc_z2_min_allowed ... Support Z2 min in M119 report	2016-10-31 07:59:45 -05:00
Scott Lahteine	23f05f8be7	Use bit-length types in block_t	2016-10-30 16:16:29 -05:00
Scott Lahteine	8dc7807d85	Add support for CoreYZ to planner.buffer_line	2016-10-30 16:16:28 -05:00
Scott Lahteine	1cf878fdb1	Calculate dm and e-steps earlier in planner	2016-10-30 16:16:28 -05:00
Scott Lahteine	75dbb71dd7	Replace block.busy with a block.flag bit	2016-10-30 16:16:28 -05:00
Scott Lahteine	c7f22f688f	buffer_line can calculate while it's waiting	2016-10-29 17:08:42 -05:00
Scott Lahteine	f3720f4e81	const arguments to test_dual_z_endstops	2016-10-29 16:01:27 -05:00
Scott Lahteine	8cebd2a7db	Arrange Z2 min before Z2 max	2016-10-29 01:54:19 -05:00
Scott Lahteine	accabf088a	Add support for Z2 min endstop to M119	2016-10-29 01:54:02 -05:00
Scott Lahteine	396434a445	Fix compiler warning in M145	2016-10-28 20:57:36 -05:00
Scott Lahteine	8e787304c9	const float ref args in planner.h	2016-10-28 20:57:36 -05:00
Scott Lahteine	07bfc45df8	Adjust spacing in gcode_M149	2016-10-28 20:57:36 -05:00
Scott Lahteine	1a2310c494	Make LCD preheat vars an array to reduce code size	2016-10-28 20:57:36 -05:00
Scott Lahteine	1226ae1912	Some cleanup in ultralcd.h	2016-10-28 20:57:21 -05:00
Scott Lahteine	50ee749082	Centralize click-handling in the LCD loop	2016-10-28 20:57:21 -05:00
Scott Lahteine	47ad97c35e	Merge pull request #5109 from thinkyhead/rc_eeprom_M218_tool_offset ... Save hotend_offset array (M218) in EEPROM	2016-10-28 20:08:29 -05:00
Scott Lahteine	bff6bbdb12	Indentation in configuration_store.cpp	2016-10-28 18:55:42 -05:00
Scott Lahteine	97115d56f9	Print error for M500 with disabled EEPROM	2016-10-28 18:53:48 -05:00
Scott Lahteine	67ab54185b	Save hotend_offset array (M218) in EEPROM	2016-10-28 18:45:23 -05:00
MagoKimbra	dfcdbb437b	Fix Command M420	2016-10-28 20:53:48 +02:00
Scott Lahteine	c34dbfb248	Merge pull request #5072 from thinkyhead/rc_preset_auto_fans ... Add predefined AUTO_FAN_PINs to pins files	2016-10-27 17:12:11 -05:00
Scott Lahteine	9a23f73765	Don't trigger endstops that are actually Z2 or probe	2016-10-27 08:12:17 -05:00
Scott Lahteine	c07cc9e3f1	Revert changes made to z dual endstop test ... #3631 broke z dual endstops. Solved by @Nocturnal42 in https://github.com/MarlinFirmware/Marlin/issues/5078#issuecomment-256572248	2016-10-27 07:41:39 -05:00
Scott Lahteine	c4c53856a4	Merge pull request #5094 from esenapaj/Fix-for-the-PR-#5088 ... Fix for the PR #5088 (Handle M108 in M1 also with ULTIPANEL)	2016-10-26 21:51:18 -05:00
Scott Lahteine	2e3110539b	Merge pull request #5095 from thinkyhead/rc_fix_bilinear_math ... Fix bilinear grid constraints	2016-10-26 21:48:19 -05:00
esenapaj	d5a5042d23	Fix for the PR #5088 (Handle M108 in M1 also with ULTIPANEL)	2016-10-27 10:32:20 +09:00
Scott Lahteine	9cbedab91b	Use DPM where possible	2016-10-26 18:38:32 -05:00
Scott Lahteine	ad38d91692	Sanity check that auto fan pins can do PWM	2016-10-26 18:38:32 -05:00
Scott Lahteine	95275eb9b3	Predefine auto fan pins in some pins files	2016-10-26 18:38:32 -05:00
Scott Lahteine	3f94b15cef	Fix bilinear grid constraints ... Followup to #5090	2016-10-26 18:11:26 -05:00
Scott Lahteine	d439fb95f7	Sanity check for the renamed options	2016-10-26 17:51:26 -05:00
Scott Lahteine	b6aa894893	Rename auto fan pins and add auto fan flags	2016-10-26 17:51:26 -05:00
Scott Lahteine	ada935de87	Allow TEMP_STAT_LEDS with only one LED defined	2016-10-26 17:51:26 -05:00
Scott Lahteine	4b056d8184	Fix warning in ultralcd.cpp	2016-10-26 17:51:26 -05:00
Scott Lahteine	9dfd029911	Fix bug in fastio.h _GET_TIMER	2016-10-26 17:51:25 -05:00
esenapaj	8b1d90e281	Follow-up the PR #5087 (Fixed SERVO pins on Azteeg X3), etc ... ・Add header ・Adjust spacing	2016-10-27 06:46:03 +09:00
Scott Lahteine	bfd3b3c604	Merge pull request #5087 from Fulg/azteeg-x3-pins ... Fixed SERVO pins on Azteeg X3	2016-10-26 06:01:16 -05:00
Scott Lahteine	208d720614	Merge pull request #5082 from Fulg/RCBugFix ... Only issue MAXTEMP when heating	2016-10-26 05:55:33 -05:00
Scott Lahteine	f0d673561f	Fix for bilinear grid outside bounds	2016-10-26 05:00:03 -05:00
Scott Lahteine	24bcea6c02	Merge pull request #5088 from thinkyhead/rc_break_m1_fix ... Handle M108 in M1 also with ULTIPANEL	2016-10-26 00:44:01 -05:00
Scott Lahteine	1ba1ec0db9	Handle M108 in M1 also with ULTIPANEL	2016-10-25 23:25:47 -05:00
Scott Lahteine	7ad33422e3	Clear dir_t size, not pointer size	2016-10-25 22:59:40 -05:00
Benoit Miller	1c716034ec	Fixed SERVO pins on Azteeg X3	2016-10-25 17:11:26 -04:00
Benoit Miller	2aa12d78dc	Only issue MAXTEMP when heating	2016-10-24 17:09:29 -04:00
Scott Lahteine	3fcf915808	Fix uninitialized var in reset_acceleration_rates	2016-10-24 11:55:41 -05:00
Scott Lahteine	14f824c3de	Merge pull request #5071 from esenapaj/Extend-measuring-range-of-thermocouple ... Extend measuring range of thermocouple for MAX31855	2016-10-24 02:00:12 -05:00
Scott Lahteine	1097a50694	Merge pull request #5070 from gcormier/rcbugfix ... Fix #4995 - M48/G29 on CoreXY maybe others?	2016-10-24 00:56:36 -05:00
Sebastianv650	c397b9d60a	Planner acceleration bugfix and speedup v2 ... .) Use already existing inverse_millimeters instead of / block->millimeters. .) Prevent overflow during acceleration calculation by checking if float is necessary. Idea modified from Sailfish. .) Save two uint32_t or even float multiplications by checking if step[AXIS] has steps and if max acceleration is lower than accel. If not, there is no need to check this axis.	2016-10-23 12:47:46 +02:00
esenapaj	70e287ca8c	Extend measuring range of thermocouple for MAX31855	2016-10-23 10:22:39 +09:00
Greg Cormier	f0aed9dac7	Fix #4995 - M48/G29 on CoreXY maybe others?	2016-10-22 20:45:13 -04:00
esenapaj	e50992694f	Fix for the PR #5066 (Updated french translation) ... MSG_INFO_PRINT_TIME is still being used	2016-10-23 06:09:56 +09:00
Scott Lahteine	483082387c	Merge pull request #5022 from esenapaj/Fix-for-the-PR-#4553 ... Fix for the PR #4553 (Save bytes for custom chars (Hitachi LCD))	2016-10-22 13:54:09 -05:00
Scott Lahteine	8b967a9ff0	Merge pull request #5058 from thinkyhead/rc_reverse_arrow_buttons ... Apply encoder reverse options to keypad arrows	2016-10-22 13:52:35 -05:00
esenapaj	523c7eaa6c	Fix for the PR #4553 (Save bytes for custom chars (Hitachi LCD))	2016-10-23 03:29:00 +09:00
Scott Lahteine	ca48a49fdb	Merge pull request #5065 from petrzjunior/transl ... [LANGUAGE] Update Czech (BLTOUCH and DAC strings)	2016-10-22 12:46:10 -05:00
Scott Lahteine	f0744fc815	Merge pull request #5066 from thinkyhead/rc_french_update ... Updated french translation	2016-10-22 12:45:51 -05:00
Gege2B	88b7f6eb46	Updated french translation	2016-10-22 12:30:22 -05:00
Scott Lahteine	3544c3632f	Merge pull request #5062 from thinkyhead/rc_warnings_fix ... Warnings fixed redux	2016-10-22 12:21:36 -05:00
Petr Zahradník junior	8323d78ed7	Translated BLTOUCH and DAC strings	2016-10-22 19:12:21 +02:00
Scott Lahteine	e151f952a3	Apply encoder reverse options to keypad arrows	2016-10-22 11:51:33 -05:00
Scott Lahteine	cfb47929ca	Merge pull request #5060 from thinkyhead/rc_fix_ugly_code ... Reduce, clean up MINTEMP / MAXTEMP test code	2016-10-22 11:27:30 -05:00
Josef Pavlik	dca50737f5	fixed warning: ISO C++ forbids compound-literals	2016-10-22 11:23:16 -05:00
Josef Pavlik	0bd66807b2	fixed warning: extra ;	2016-10-22 11:12:29 -05:00
Josef Pavlik	d35dc407a8	fixed warning: ISO C99 requires rest arguments to be used	2016-10-22 11:12:29 -05:00
Josef Pavlik	c2b51af3ba	fixed warning: ISO C does not permit named variadic macros	2016-10-22 11:12:29 -05:00
Scott Lahteine	0d3fc7dd89	Merge pull request #5059 from gcormier/fixbaby ... Set defer delay back to false when exiting babystepping.	2016-10-22 10:59:17 -05:00
Scott Lahteine	f888597197	Reduce, clean up code for mintemp/maxtemp tests	2016-10-22 10:31:03 -05:00
Scott Lahteine	ad64723354	Move MAX_EXTRUDERS to pins.h	2016-10-22 10:07:51 -05:00
Scott Lahteine	5f5a55a0de	Add a ZERO macro to clear arrays	2016-10-22 10:07:18 -05:00
Greg Cormier	0009725637	Set defer delay back to false when exiting babystepping.	2016-10-22 09:43:30 -04:00
Scott Lahteine	627f9d5285	Merge pull request #5056 from thinkyhead/rc_lin_adv_opt ... LIN_ADVANCE optimizations	2016-10-22 07:06:39 -05:00
Scott Lahteine	0908329d96	Merge pull request #5057 from thinkyhead/rc_mbl_lcd_logical ... Fix manual leveling coordinates	2016-10-22 06:31:02 -05:00
Scott Lahteine	14e60f0d3b	Correct typo in configs ... As pointed out by #5044	2016-10-22 05:56:32 -05:00
Scott Lahteine	1165e83263	MBL coordinates are logical	2016-10-22 05:55:44 -05:00
Scott Lahteine	dbfabb4c0a	Merge pull request #5043 from Kaibob2/patch-5 ... Correct grammar and translation in language_de.h	2016-10-22 05:52:54 -05:00
Scott Lahteine	b19bba275f	No LCD timeout during babystepping ... As requested in #5031	2016-10-22 05:26:07 -05:00
Scott Lahteine	b9109b2875	Improve LIN_ADVANCE commentary (all configs)	2016-10-22 05:03:09 -05:00
Sebastianv650	9818d97587	Fix Z-hops during retract/prime lead to blobs ... We don't want to have retract/prime movements done with LIN_ADVANCE, that's also true with simultaneously executed Z-hops.	2016-10-22 04:54:59 -05:00
Sebastianv650	599649e45d	Add formula for LIN_ADVANCE_K ... With this formula, a start value for K for further fine-calibration can be calculated.	2016-10-22 04:54:59 -05:00
Scott Lahteine	be7d245eff	Merge pull request #5008 from thinkyhead/test_endstop_hits ... Save some PROGMEM in MBL G28	2016-10-22 03:35:52 -05:00
Scott Lahteine	7c0e52256d	Merge pull request #5053 from thinkyhead/rc_fix_baud_config ... Patch BAUDRATE line in configs	2016-10-22 03:27:45 -05:00
Scott Lahteine	2783dcb4cc	Save some RAM in MBL's G29	2016-10-22 02:52:56 -05:00
Scott Lahteine	4f5a8c05d5	Tweaks to endstops macros	2016-10-22 02:52:56 -05:00
Scott Lahteine	083d41a2c2	Remove redundant estep rate code from LIN_ADVANCE ... As noted by https://github.com/MarlinFirmware/Marlin/pull/4971#issuecomment-252503295	2016-10-22 02:19:14 -05:00
Scott Lahteine	4f6bfabaad	Patch BAUDRATE line in configs	2016-10-22 00:48:52 -05:00
Kai	2bfedb74d5	Correct grammar and translation in language_de.h ... Made Filament change Text sound like correct german.	2016-10-19 14:56:46 +02:00
esenapaj	1e1edeadd3	Fix for the commit dc2cb84 (Revert acceleration limiting to avoid overflow) ... ・Add forgotten '\'	2016-10-18 18:07:20 +09:00
Scott Lahteine	dc2cb8454c	Revert acceleration limiting to avoid overflow	2016-10-17 17:08:41 -05:00
Scott Lahteine	6ae5cf17a9	Merge pull request #5033 from esenapaj/Fix-freezing-with-MAX31855 ... Fix freezing and MINTEMP Error with MAX31855 thermocouple	2016-10-17 16:22:20 -05:00
Scott Lahteine	f257c4bcae	Merge pull request #5036 from thinkyhead/rc_dac_code_deps ... Fix DAC current code	2016-10-17 16:19:00 -05:00
Scott Lahteine	b80cc0cbb5	Fix DAC current code	2016-10-17 15:17:57 -05:00
esenapaj	385bd8a4a3	Fix freezing and MINTEMP Error with MAX31855 thermocouple	2016-10-16 07:33:14 +09:00
Scott Lahteine	ca7275a67a	Disable EXTRAPOLATE_FROM_EDGE by default	2016-10-14 14:44:28 -05:00
Scott Lahteine	0921c7da84	Merge pull request #4997 from thinkyhead/rc_jerk_from_mk2 ... Adapt Jerk / Speed code from Prusa MK2	2016-10-12 06:38:50 -05:00
Scott Lahteine	4d89652bc2	Apply minor optimizations to planner.cpp	2016-10-12 04:42:15 -05:00
Scott Lahteine	1092319b19	Adapt speed/jerk code based on Prusa MK2 branch	2016-10-12 04:42:14 -05:00
Scott Lahteine	37643fef63	Merge pull request #4972 from bgort/platformio-improvements ... Move platformio directories out of source tree	2016-10-12 03:42:33 -05:00
Scott Lahteine	8e1cc9332a	Replace block flag bools with flag bits ... …and apply const to some method parameters	2016-10-10 23:17:49 -05:00
Scott Lahteine	d41f2bdbd8	Merge pull request #4991 from thinkyhead/rc_max31855_fix ... Patches for Stepper DAC and MAX31855	2016-10-10 20:12:06 -05:00
Scott Lahteine	e7cf566fc5	Do kinematic segments with buffer_line_kinematic ... This breaks the raw option, but in the future perhaps all planner moves will be sent in raw form instead of logical.	2016-10-10 17:14:03 -05:00
Scott Lahteine	a10e81dc2a	Minor cleanup of set_bed_leveling_enabled	2016-10-10 17:14:03 -05:00
Scott Lahteine	029824bc49	Patch ADJUST_DELTA macro for SCARA	2016-10-10 17:14:03 -05:00
Scott Lahteine	5ce5a9c822	Marlin: planner.h tweak	2016-10-10 17:14:03 -05:00
Scott Lahteine	d963020532	Sort out some header dependencies	2016-10-10 17:14:03 -05:00
Scott Lahteine	e17f9b8b99	DAC patches ... As suggested by #4985	2016-10-10 14:08:04 -05:00
Scott Lahteine	2cb5df8a56	Merge pull request #4984 from esenapaj/Small-fix-for-PR-#4980 ... Small fix for the PR #4980 (LIN_ADVANCE bug fix and optimization)	2016-10-10 13:30:47 -05:00
Scott Lahteine	b6221df3f3	Merge pull request #4983 from MarlinFirmware/revert-4933-rc_drop_pid_func_range ... Revert "Removal of PID functional range"	2016-10-10 13:29:54 -05:00
Scott Lahteine	a07033a6c1	Merge pull request #4974 from esenapaj/Follow-up-the-PR-#4955 ... Fix and follow-up the PR #4955 (PINS_DEBUGGING and M43: Read pin states), etc	2016-10-10 13:27:52 -05:00
Scott Lahteine	f8199b2cc1	Merge pull request #4982 from thinkyhead/rc_abl_bugfix ... Fix planner with kinematics, delta ABL	2016-10-10 13:24:22 -05:00
esenapaj	f41c60d4a4	Follow-up the PR #4955, etc ... ・More ANALOG NUMBERING to Analog Input ・Add comment header to all the section of all the pins files ・Sort sections as follows: 1. Some special definitions (USBCON, LARGE_FLASH, etc) 2. Servos 3. Limit Switches 4. Z Probe 5. Steppers 6. Temperature Sensors 7. Heaters / Fans 8. Misc. Functions 9. LCD / Controller ・Move MAX6675_SS into "Temperature Sensors" section ・Adjust spacing	2016-10-10 14:22:43 +09:00
esenapaj	00456b0cb3	Fix compilation errors	2016-10-10 14:22:43 +09:00
esenapaj	cfb5c24bc9	Small fix for the PR #4980 (LIN_ADVANCE bug fix and optimization) ... ・Fix a comment about timer	2016-10-10 07:48:42 +09:00
Scott Lahteine	149b8d9e4b	Handle MAX31855 error conditions	2016-10-09 17:12:50 -05:00
Scott Lahteine	f4ec265363	Fix a typo	2016-10-09 16:45:29 -05:00
Scott Lahteine	4ec2d459e6	Fix mcp4728_setVref_all as followup to #4967	2016-10-09 16:45:00 -05:00
Scott Lahteine	1e551c0688	Revert "Squashed - Removal of PID functional range"	2016-10-09 16:27:45 -05:00
Scott Lahteine	4037df82b0	Merge pull request #4981 from esenapaj/Update-Japanese-language ... Update Japanese translation, etc	2016-10-09 16:11:53 -05:00
Scott Lahteine	e4e290d957	Make EXTRUDER_RUNOUT_PREVENT kinematic compatible	2016-10-09 15:58:33 -05:00
Scott Lahteine	847429eff4	Make tool_change kinematic compatible	2016-10-09 15:58:32 -05:00
Scott Lahteine	a4a7ca10ca	Make USE_DELTA_IK_INTERPOLATION compatible with ABL	2016-10-09 15:58:32 -05:00
Scott Lahteine	c5cac486f5	Use a, b, c instead of lx, ly, lz	2016-10-09 14:34:24 -05:00
Josef Pavlik	f8c2473a71	Improve planner kinematics, fix delta ABL	2016-10-09 13:32:46 -05:00
Scott Lahteine	48761f2021	Patch delta endstop adjustment config	2016-10-09 13:32:45 -05:00
Josef Pavlik	28d41b48e3	delta endstop adjustment configurable	2016-10-09 13:09:34 -05:00
Scott Lahteine	ff6b23cb0f	Fix an issue with shifted LCD lines	2016-10-09 13:00:00 -05:00
Scott Lahteine	e4d2662d81	Use some macros in M48	2016-10-09 12:21:05 -05:00
Scott Lahteine	3752d9aca8	Fix timer comments	2016-10-09 12:11:00 -05:00
Sebastianv650	a448cedbc5	LIN_ADVANCE bug fix and optimization ... .) long to int: Extruder stalls at 10kHz / 20kHz step limits with long. .) Take the delta_adv_steps calculation out of the step_loops loop. Wasted calculation performance if done inside. .) >> 2 replaced by 3: Is divide by 8. Reason: Timer 0 runs at 16/8=2MHz, Timer 1 at 16/64=0.25MHz. ==> 2/0.25=8.	2016-10-09 11:55:02 -05:00
esenapaj	b27080c1dd	Update Japanese translation ... ・Add new translation	2016-10-10 01:52:51 +09:00
esenapaj	0780146034	Move DAC section from inside of the changing filament section	2016-10-10 01:17:46 +09:00
Brian	9c0404eae4	Move platformio directories out of source tree	2016-10-08 13:45:26 -04:00
Scott Lahteine	a1b50f1102	Cleanup of code style	2016-10-07 15:57:24 -05:00
jaysonkelly	13c9dcc600	Add LCD menu for DAC	2016-10-07 15:13:03 -05:00
Scott Lahteine	00261cbfcb	Merge pull request #4933 from thinkyhead/rc_drop_pid_func_range ... Squashed - Removal of PID functional range	2016-10-07 15:07:55 -05:00
Scott Lahteine	ee01def16d	Merge pull request #4955 from thinkyhead/rc_debug_pins ... PINS_DEBUGGING and M43: Read pin states	2016-10-07 14:47:34 -05:00
Scott Lahteine	a0df34fd4c	Add PINS_DEBUGGING advanced config option	2016-10-07 14:20:13 -05:00
Scott Lahteine	e21bab5243	PINS_DEBUGGING and M43 Read Pins	2016-10-07 14:11:48 -05:00
Scott Lahteine	3c97fa6e29	Merge pull request #4963 from esenapaj/Fix-for-advance-algorithm ... Move routine of direction signal of ADVANCE and LIN_ADVANCE from Stepper::isr() to Stepper::advance_isr()	2016-10-07 00:33:42 -05:00
Scott Lahteine	48e63c4730	Comment some globals	2016-10-06 22:06:33 -05:00
Scott Lahteine	9a6c66602f	Fix formatting of extrapolate debug output	2016-10-06 17:04:22 -05:00
Scott Lahteine	cd77eb5c40	Clear grid for bilinear G29	2016-10-06 17:00:53 -05:00
Scott Lahteine	53a0856f5c	Print Y as int in print_bed_level	2016-10-06 16:46:54 -05:00
esenapaj	f8df88f271	Move routine of direction signal of ADVANCE and LIN_ADVANCE from Stepper::isr() to Stepper::advance_isr()	2016-10-07 02:01:29 +09:00
Brian	357854a7ef	tweak variables;	2016-10-05 19:49:05 -04:00
Brian	48cf19151a	Improve M48 output; Add min, max, range, etc.	2016-10-05 16:09:39 -04:00
Scott Lahteine	c63cb45268	Fix thermal runaway timeout	2016-10-05 08:42:39 -05:00
Scott Lahteine	e6164d254d	Clean up GCode command short comments	2016-10-05 06:13:30 -05:00
Scott Lahteine	47bd142b29	Should marlinAnalogInputToDigitalPin use analogInputToDigitalPin?	2016-10-05 06:13:30 -05:00
Scott Lahteine	bd8520e61d	Label analog pins in a similar way ... Some other pins formatting also	2016-10-05 06:13:30 -05:00
Scott Lahteine	0c0deb5194	Common pin_is_protected function	2016-10-05 04:41:27 -05:00
Scott Lahteine	49d77720d5	More support for 4th extruder or heater	2016-10-05 04:40:22 -05:00
Scott Lahteine	46839c222a	Comment and clean up some vars	2016-10-04 23:40:45 -05:00
Scott Lahteine	8910bb7c97	Fix buzzer conditional compile	2016-10-04 21:38:41 -05:00
Scott Lahteine	de7e798e6f	Replace single-char S_ECHOs with S_CHAR	2016-10-04 21:38:41 -05:00
Scott Lahteine	0e83f34174	Tweak debugging of probe_pt	2016-10-04 21:38:00 -05:00
Scott Lahteine	cc02f6edf8	Merge pull request #4943 from esenapaj/Small-update-of-language_kana_h ... Small update of language_kana.h	2016-10-04 03:21:57 -05:00
Scott Lahteine	ca26011e3c	Merge pull request #4941 from MagoKimbra/rc_fix_M205 ... Add note for M205	2016-10-04 03:21:20 -05:00
Scott Lahteine	9485aa8f13	Include negative Z probe offset in clearance move	2016-10-03 16:18:04 -05:00
Scott Lahteine	5c1eb595e6	Fix for G2/G3 negative radius ... As suggested in #4940	2016-10-03 14:48:44 -05:00
esenapaj	f09ae96f28	Small update of language_kana.h	2016-10-03 23:41:39 +09:00
MagoKimbra	7b37539fe7	Add note for M205	2016-10-03 08:54:15 +02:00
Scott Lahteine	d5f598cd82	Tweak probe debug, add newline	2016-10-02 17:35:40 -05:00
Scott Lahteine	c592ccb6f5	Patch max_jerk[Z] menu item	2016-10-02 10:12:47 -05:00
Scott Lahteine	d80a79eb77	Use right-shift instead of / 2, why not?	2016-10-02 07:01:40 -05:00
Rerouter	02fe9cf558	Removal of functional range constraint ... Also lined up the >> 1 and / 2 mentioned earlier in the unconstrained I term issue,	2016-10-02 07:01:40 -05:00
Rerouter	5f5d87cad3	Update Configuration.h	2016-10-02 07:01:40 -05:00
Scott Lahteine	761593b74b	Cleanup some vars, use of min/max	2016-10-02 06:34:56 -05:00
Scott Lahteine	d19cfcfc1d	max_jerk array, DEFAULT_XYJERK => DEFAULT_[XY]JERK	2016-10-02 06:34:56 -05:00
Scott Lahteine	e7dc174f30	More detailed debugging of G28 delta	2016-10-02 02:18:57 -05:00
Scott Lahteine	473f4a17a8	Merge pull request #4914 from Rerouter/PID-Unconstrained-Itemp ... Pid unconstrained itemp	2016-10-01 06:58:07 -05:00
Scott Lahteine	bad8899ebc	Merge pull request #4900 from thinkyhead/rc_g38_changes ... Cleanup of G38.2 / G38.3	2016-10-01 06:57:17 -05:00
Scott Lahteine	73ce3a61c7	Cleanup, comment zigzag	2016-10-01 05:21:52 -05:00
Scott Lahteine	0d538f3db6	Add to all configurations	2016-10-01 05:00:53 -05:00
Scott Lahteine	919fe3e4b8	Rename feature to G38_PROBE_TARGET	2016-10-01 05:00:53 -05:00
Scott Lahteine	a2864ab7fe	Patched up, cleaned up	2016-10-01 05:00:53 -05:00
Bob-the-Kuhn	2911aa7ffa	code changes to implement G38 commands ... 1) modified 3 code files Marlin.h Marlin_main.cpp endstops.cpp 2) modified config files so I could test on my machine Testing was done on an AzteegX3pro based machine. The probe was hooked to the Z_MIN endstop. My controller doesn't have a dedicated Z_PROBE input so I couldn't test that functionality. Verified that a large file (without any G38 commands) executed the same before and after the changes. Verified that the head moves as expected when G38.2 and G38.3 commands are issued. Single & multiple axis moves were tested along with + and - directions. Code was added to the main ISR. In normal operation only one extra IF statement is evaluated. I didn't notice any performance degradation because of the added code. The G38 commands are expected to be issued manually by the operator during machine setup. The G38 commands wait until the machine is idle before proceeding. That way the other commands are minimally impacted by the extra ISR overhead when a G38 command is in the queue. The G38 commands are very similar to the G28 commands except 1) only the Z_PROBE is used and movement can be in the + or - direction. See issue 4677 for a discussion on adding G38 commands to Marlin. Feature request: add ability to use G38.2 command (CNC) MarlinFirmware/Marlin#4677	2016-10-01 05:00:53 -05:00
Scott Lahteine	74d048e77e	Merge pull request #4927 from thinkyhead/rc_bltouch_noraise ... Don't check Z_MAX on raise when the probe pwns the pin	2016-10-01 04:52:56 -05:00
Scott Lahteine	4afa293289	Say "BLTOUCH" in machine info report	2016-09-30 17:13:27 -05:00
Scott Lahteine	ed7d2694fc	Don't check Z_MAX on raise when the probe pwns the pin	2016-09-30 16:41:30 -05:00
Scott Lahteine	3bbdd48a4d	Merge pull request #4918 from thinkyhead/rc_abl_patchups ... Fix up ABL - Add PROBE_Y_FIRST option. Arduino 1.6.8 required.	2016-09-29 15:29:01 -05:00
Scott Lahteine	fffc9fefa8	Apply changes to all configs	2016-09-29 02:17:33 -05:00
Scott Lahteine	587cb6c283	K8400 has 1xXY an 2xZ endstop plugs	2016-09-29 02:07:22 -05:00
Scott Lahteine	d234bc160e	Require Arduino 1.6.8 to compile	2016-09-29 02:00:27 -05:00
Scott Lahteine	2d2c9bdf92	Add PROBE_Y_FIRST option for probe order	2016-09-29 02:00:27 -05:00
Scott Lahteine	c8c57e59fc	Patch the end of G29 to sync plan position	2016-09-29 02:00:27 -05:00
Scott Lahteine	81b8c9f8ec	Add XY parameters to G29 for mesh dimensions	2016-09-29 02:00:27 -05:00
Scott Lahteine	56cf674150	M420 can now enable/disable ABL	2016-09-29 02:00:26 -05:00
Scott Lahteine	06790977c4	Use updated position methods	2016-09-29 01:31:05 -05:00
Scott Lahteine	e8f2604a6f	Patch print_bed_level numbering	2016-09-29 01:31:05 -05:00
Scott Lahteine	d066610514	Patch up bilinear_z_offset	2016-09-29 01:31:05 -05:00
Scott Lahteine	850e38d013	G30 will only disable bed leveling	2016-09-29 01:31:04 -05:00
Scott Lahteine	510ef5d14a	Standard function to turn bed leveling on/off	2016-09-29 01:27:37 -05:00
Scott Lahteine	ecf7cdde65	Augment planner/stepper getters/setters	2016-09-29 01:27:37 -05:00
Scott Lahteine	2febd8ec82	Double-touch debugging	2016-09-29 01:27:37 -05:00
Scott Lahteine	b331077c32	Use stepper.get_axis_position_degrees	2016-09-29 01:27:37 -05:00
Scott Lahteine	0d9efb24f3	Fix up bilinear_z_offset	2016-09-29 01:26:22 -05:00
jaysonkelly	3b3d282f8e	Adjusted values for Rigidboard Configuration ... Rigidboard differs a little in configuration from the PrinterBoardRevF we modeled the code after.	2016-09-28 14:14:04 -05:00
Scott Lahteine	850259bb25	Watch bed temp also for Control menu item	2016-09-28 14:14:04 -05:00
esenapaj	92c03a44a9	Fix the PR #4899 (ABL: Enable by type. Bilinear for all.) etc. ... About Configuration.h: ・Fix the PR #4899 (ABL: Enable by type. Bilinear for all.) Remove Duplicated contents ・Fix the PR #4305 (Custom boot screen feature improvement) Revert from "during boot" to "during bootup" in all the example Configuration.h ・Fix the PR #4207 (Clean up, simplify and generalize the Allen-key-probe code.) Resolve and relocate the duplicated definitions in Z_PROBE_ALLEN_KEY section ・Follow-up the PR #4805 (Additional documentation of Configuration.h) Add forgotten changes to all the example Configuration.h Adjust spacing About Configuration_adv.h: Add missing description of SLOWDOWN for DELTA Adjust spacing	2016-09-28 14:14:04 -05:00
Rerouter	50e5ee4de4	Update Configuration.h	2016-09-28 17:38:09 +10:00
Rerouter	1a2f1d4974	Update temperature.cpp	2016-09-28 17:36:53 +10:00
Rerouter	a765c98850	Removal of the constraints of the Iterm	2016-09-28 17:26:49 +10:00
Scott Lahteine	8b46eb3766	Fix bilinear interpolation	2016-09-27 03:18:49 -05:00
Scott Lahteine	5100bdac81	Improve Bilinear Grid ... - Extrapolate properly for even numbered grid points - Extrapolate using average, not median - Improve bilinear grid report output - Add debug output for bilinear extrapolation - Add option to extrapolate from edge, not center	2016-09-27 00:03:19 -05:00
Scott Lahteine	a3e91ec65e	Add 'Q' option to G29 when debug leveling is on	2016-09-27 00:03:19 -05:00
Scott Lahteine	1fceda4fb0	Add leveling type and details to machine_info	2016-09-27 00:03:19 -05:00
Scott Lahteine	e0e0166075	Fix auto bed leveling - turn on after successful G29	2016-09-27 00:03:19 -05:00
Scott Lahteine	18e40de39c	Adjust final Z after bilinear G29	2016-09-26 00:22:22 -05:00
Scott Lahteine	ea0dbee3c9	Enable ABL by type, support bilinear on cartesian	2016-09-25 23:35:37 -05:00
Scott Lahteine	9cebbabd05	Merge pull request #4893 from thinkyhead/rc_stat_led_check ... Define status LED pins without condition	2016-09-25 18:50:47 -05:00
Scott Lahteine	5fff8d148b	Clean up digital pots and microsteps	2016-09-25 11:16:22 -05:00
Scott Lahteine	570676d265	Include requirements in "Implemented Codes"	2016-09-25 07:50:33 -05:00
Scott Lahteine	cb48292338	Use fastio for literal pins	2016-09-25 06:33:38 -05:00
Scott Lahteine	07703d2bd6	Use _PIN suffix on some pins	2016-09-25 06:33:38 -05:00
Scott Lahteine	203e519bf4	Sanity check for status LED pins	2016-09-25 06:33:38 -05:00
Scott Lahteine	ba43277429	Always define status LED pins	2016-09-25 06:33:37 -05:00
Scott Lahteine	ad691022d7	Fix up spacing in A4JP pins	2016-09-25 06:33:37 -05:00
Scott Lahteine	fba0b67f7d	Rename status led pins	2016-09-25 06:33:37 -05:00
Scott Lahteine	9d86c07702	Clean up some fastio.h spacing	2016-09-25 06:33:37 -05:00
Scott Lahteine	ab84ed22ca	No such thing as G6 and G7 pins	2016-09-25 05:28:22 -05:00
Scott Lahteine	c2f13be750	Mightyboard Revision E	2016-09-25 05:28:04 -05:00
Scott Lahteine	041d127cd3	Match bltouch test in do_homing_move with new code	2016-09-24 23:58:08 -05:00
Scott Lahteine	16461900c2	Fix for HEATERS_PARALLEL	2016-09-24 05:34:40 -05:00
Scott Lahteine	1583d37edd	Comment on M851 case	2016-09-24 05:34:36 -05:00
Scott Lahteine	076f3a8284	unsigned char => uint8_t	2016-09-24 05:23:40 -05:00
Scott Lahteine	8935bed594	MIDDLE_DEAD_ZONE => MIDDLE_DEAD_ZONE_R	2016-09-24 05:18:36 -05:00
Scott Lahteine	6cf0952bf9	Merge pull request #4887 from thinkyhead/rc_autumn_fixups ... Improve MINIMUM_STEPPER_PULSE	2016-09-24 03:23:42 -05:00
Scott Lahteine	8061f1fac9	Merge pull request #4888 from thinkyhead/fix_warnings_etc ... Suppress warnings, fix nonlinear_z_offset	2016-09-24 03:22:49 -05:00
esenapaj	7bdc58a818	Suppress warnings, fix nonlinear_z_offset	2016-09-24 03:06:08 -05:00
Scott Lahteine	eabff30e75	Improve MINIMUM_STEPPER_PULSE	2016-09-24 02:23:43 -05:00
esenapaj	3ed8f8331c	Update Japanese translation ... ・Add new translation	2016-09-24 09:24:38 +09:00
Scott Lahteine	da1644313d	Merge pull request #4883 from esenapaj/Follow-up-the-PR-#4860 ... Follow-up the PR #4860 (Fix BLTOUCH string and SERVO_DELAY)	2016-09-23 16:39:37 -05:00
Scott Lahteine	903b8bb60c	No need for auto_bed_leveling_was_enabled	2016-09-23 16:38:22 -05:00
esenapaj	ee60225c07	Follow-up the PR #4860 (Fix BLTOUCH string and SERVO_DELAY)	2016-09-24 06:18:27 +09:00
Scott Lahteine	0951bffcc0	Sanity check homing bumps	2016-09-23 15:39:02 -05:00
Scott Lahteine	a9a21db39f	No homing bump if bump distance is 0 (or less)	2016-09-23 15:39:02 -05:00
Scott Lahteine	2b4da57ea7	Patch Z safe homing for probe Z homing	2016-09-23 15:39:02 -05:00
Scott Lahteine	c6dd539c84	Print error for M42 bad pin	2016-09-23 15:39:02 -05:00
Scott Lahteine	8b399610fb	Skip raw moves to current position	2016-09-23 15:39:02 -05:00
Scott Lahteine	22ece0081e	Pass array pointer to unapply_leveling	2016-09-23 15:39:01 -05:00
Scott Lahteine	cbc158eb62	Add a proper flag for ABL enabled	2016-09-23 15:39:01 -05:00
Scott Lahteine	666e944336	Init xProbe/yProbe for compiler	2016-09-23 15:39:01 -05:00
Scott Lahteine	2c52e6ecf4	Clean up G28 MBL code	2016-09-23 15:39:01 -05:00
Scott Lahteine	0bf1054bb2	Patch do_homing_move for SCARA	2016-09-23 15:39:00 -05:00
Scott Lahteine	6ad0da661c	Report position in G92	2016-09-23 15:39:00 -05:00
Scott Lahteine	199a7b5dd5	Tweak SCARA debugging	2016-09-23 15:39:00 -05:00
Scott Lahteine	865ad25781	Fix prepare_kinematic_move_to precision	2016-09-23 15:39:00 -05:00
Scott Lahteine	85e607153b	Improve kinematic optimization options	2016-09-23 03:03:15 -05:00
Scott Lahteine	2846531f0b	const argument in do_homing_move	2016-09-23 03:03:15 -05:00
Scott Lahteine	cc639d7d9c	Less indentation in Stepper::isr	2016-09-23 03:03:14 -05:00
Scott Lahteine	7dec8071b2	Always synchronize in Stepper::set_position	2016-09-23 03:03:14 -05:00
Scott Lahteine	c6142aa2a1	Minor cleanups in Marlin_main.cpp	2016-09-23 03:03:14 -05:00
Scott Lahteine	0427f3cc3b	Use memcpy/memset in planner	2016-09-23 03:03:14 -05:00
Scott Lahteine	6b9bf8e8fe	Add Planner::sync_from_steppers ... Use to sync the planner after an interrupted move (when not overriding the logical position).	2016-09-23 03:03:14 -05:00
Scott Lahteine	be11a8a938	Fix debug in Planner::buffer_line	2016-09-23 03:03:13 -05:00
Scott Lahteine	b211df818e	Make movement functions more available	2016-09-23 03:03:13 -05:00
Scott Lahteine	6335acbf5c	Patch bug in linear unapply_leveling	2016-09-23 03:03:13 -05:00
Scott Lahteine	e8d5073a90	Use probe clearance for bump when homing Z with probe	2016-09-22 15:41:28 -05:00
Scott Lahteine	dbe41245f1	Merge pull request #4821 from thinkyhead/rc_revert_to_raises ... Z Raise/Clearance rather than Height	2016-09-22 15:30:07 -05:00
Scott Lahteine	747a2257dd	Only deploy/stow BLTOUCH on downward move	2016-09-22 15:26:19 -05:00
Scott Lahteine	e242946ac3	Patch G29 for linear leveling, reachable with probe	2016-09-22 15:26:19 -05:00
Scott Lahteine	b800eb0fed	Add probe option to position_is_reachable	2016-09-22 15:26:19 -05:00
Scott Lahteine	fafafcf9d1	Use unapply_leveling in set_current_from_steppers_for_axis	2016-09-22 15:26:18 -05:00
Scott Lahteine	e69d1e2879	Homing/probing feedrate, comments	2016-09-22 15:26:18 -05:00
Scott Lahteine	7d72ed688c	Revert motor_current_setting to constexpr ... We should use `constexpr` wherever it makes sense, for its added benefits. See http://stackoverflow.com/questions/13346879/const-vs-constexpr-on-variables	2016-09-22 15:26:18 -05:00
Scott Lahteine	145d9005d1	Fix BLTOUCH string and SERVO_DELAY	2016-09-21 01:45:23 -05:00
Scott Lahteine	2b7cc27c37	Merge pull request #4840 from thinkyhead/rc_G2_G3_arc_r_method ... Add support for G2/G3 with R parameter	2016-09-21 01:30:37 -05:00
Scott Lahteine	e0e10e0e45	Merge pull request #4859 from thinkyhead/rc_kinematic_and_scara ... Kinematic and SCARA patches	2016-09-21 01:21:49 -05:00
Scott Lahteine	31f03c838a	Only deploy/stow BLTouch for Z axis	2016-09-21 00:54:54 -05:00
Scott Lahteine	3913e04ac7	Add Delta kinematic optimization options	2016-09-20 18:48:06 -05:00
Scott Lahteine	8e31640229	Optimize prepare_kinematic_move_to	2016-09-20 18:48:06 -05:00
Scott Lahteine	fd9b8ae4d4	Use position_is_reachable in G29, M48	2016-09-20 18:48:06 -05:00
Scott Lahteine	7194e4434f	SCARA support in position_is_reachable	2016-09-20 18:48:06 -05:00
Scott Lahteine	1c5f9821c4	SCARA support in homeaxis	2016-09-20 18:48:05 -05:00
Scott Lahteine	92b4459f6c	Simpler G92 for SCARA	2016-09-20 18:48:05 -05:00
Scott Lahteine	46cc2e3f6a	Fix get_cartesian_from_steppers	2016-09-20 18:31:36 -05:00
Scott Lahteine	435c3ed404	Patch SCARA_move_to_cal for coordinate space	2016-09-20 18:31:36 -05:00
Scott Lahteine	5efb12e889	Simpler report_current_position for SCARA	2016-09-20 18:31:36 -05:00
Scott Lahteine	83fc5e1540	No line_to_* functions with IS_KINEMATIC	2016-09-20 18:31:36 -05:00
Scott Lahteine	59d39d7655	G0 direct move for SCARA	2016-09-20 18:31:36 -05:00
Scott Lahteine	ad9d6870ed	SCARA support in do_blocking_move_to	2016-09-20 18:31:36 -05:00
Scott Lahteine	8542ebcecd	prepare_move_to_destination_raw => prepare_uninterpolated_move_to_destination	2016-09-20 18:31:36 -05:00
Scott Lahteine	f900f97611	Update sw endstops in set_axis_is_at_home	2016-09-20 18:31:36 -05:00
Scott Lahteine	0d43cef1de	M206 for MORGAN_SCARA	2016-09-20 18:31:36 -05:00
Scott Lahteine	e94cb7a380	MORGAN_SCARA kinematics	2016-09-20 18:31:36 -05:00
Scott Lahteine	890bade2fa	Additions, mods to SCARA config	2016-09-20 18:31:36 -05:00
Scott Lahteine	01f1028510	Try on "CLEARANCE" for size	2016-09-20 18:29:49 -05:00
Scott Lahteine	0e7d638a7a	Revert to Probe Raise rather than Probe Height	2016-09-20 18:29:49 -05:00
Scott Lahteine	51e42a2d77	Adjust BLTouch probe behavior ... Addressing #4855 - Have the pin deploy only immediately before probing - Have the pin retract immediately after every probe	2016-09-20 16:20:36 -05:00
Scott Lahteine	13523cbf29	Fix and extend BLTouch support	2016-09-20 16:20:36 -05:00
Scott Lahteine	5cbed13f41	'constexpr' => 'const' for PWM_MOTOR_CURRENT	2016-09-20 15:57:48 -05:00
Scott Lahteine	7ae351c92f	Merge pull request #4842 from thinkyhead/rc_DISABLE_Z_MIN_PROBE_ENDSTOP_whassup ... Drop DISABLE_Z_MIN_PROBE_ENDSTOP, clean up probe config	2016-09-20 12:16:51 -05:00
Scott Lahteine	ba94c89e21	Merge pull request #4852 from esenapaj/Fix-for-advance-extrusion-algorithms ... Fix for advance extrusion algorithms	2016-09-20 11:33:14 -05:00
esenapaj	954563d603	Adjust spacing	2016-09-20 19:35:44 +09:00
esenapaj	7e9576dc5b	Extend the e_steps[] from int to long for allowing more than 32,767 E steps ... Probably needed for long straight lines when using high microstepping	2016-09-20 19:35:44 +09:00
esenapaj	b04ed8f9c3	Fix inverted stepper signal of ADVANCED and LIN_ADVANCED	2016-09-20 19:35:44 +09:00
esenapaj	8692748ecd	Fix broken direction signal of ADVANCED and LIN_ADVANCED ... Remove a setting proccess of E direction in advance_isr()	2016-09-20 19:35:44 +09:00
Scott Lahteine	e9ce42353e	Patch G29 for 3-point leveling	2016-09-20 04:46:41 -05:00
Scott Lahteine	c2744d8a8b	Add support for G2/G3 with R parameter	2016-09-19 00:35:09 -05:00
Scott Lahteine	e05af606a8	Clean up probe config options	2016-09-19 00:26:16 -05:00
Scott Lahteine	153e240cdd	Probe conditionals to Conditionals_LCD.h	2016-09-19 00:25:53 -05:00
Scott Lahteine	ff38a3c3b1	Use SD Detect Pin 53 for 3DRAG, K8200, and K8400 ... See #4316	2016-09-18 23:46:09 -05:00
Scott Lahteine	f38a33a5d8	Add handling of BLTouch error state	2016-09-18 22:00:32 -05:00
Scott Lahteine	c4dcfa254e	Allow override of Z_ENDSTOP_SERVO_NR with BLTOUCH	2016-09-18 22:00:32 -05:00
Scott Lahteine	7d9ebda478	Remove redundant servo probe sanity check	2016-09-18 21:46:18 -05:00
Scott Lahteine	f0beae7641	Fix stupid, stupid, stupid oversight in G29 update ... Mea culpa!	2016-09-18 16:24:47 -05:00
Scott Lahteine	77639672d7	Move NONLINEAR bed leveling to planner ... This is in advance of moving non-linear bed leveling to the planner class.	2016-09-18 13:50:38 -05:00
Scott Lahteine	9429c7db89	Use ABC indices in delta[]	2016-09-18 13:50:38 -05:00
Scott Lahteine	5f2f991192	Use 'logical' rather than 'target' or 'cartesian'	2016-09-18 13:50:38 -05:00
Scott Lahteine	40d3e854f6	Remove redundant extern delta[]	2016-09-18 13:39:47 -05:00
Scott Lahteine	2ebfbc4c8d	Merge pull request #4836 from thinkyhead/rc_some_comments ... Some comments, const args, debug output tweaks	2016-09-18 13:38:07 -05:00
Scott Lahteine	e5505e3b33	Allow non-square leveling grid	2016-09-18 13:11:20 -05:00
Scott Lahteine	2fc9ad6657	Use const ref args in probe_pt	2016-09-18 12:58:43 -05:00
Scott Lahteine	2c2688d7ad	Adjust comments, spacing	2016-09-18 12:58:42 -05:00
Scott Lahteine	b9d19b0008	Tweak extrapolate_one_point	2016-09-18 12:58:42 -05:00
Scott Lahteine	3c0b591935	Fix nozzle position description	2016-09-18 12:58:42 -05:00
Scott Lahteine	18d8dd4c0f	set_current_from_steppers_for_axis const arg	2016-09-18 12:58:42 -05:00
Scott Lahteine	edfaf1c582	Stepper::report_positions patch	2016-09-18 12:58:42 -05:00
Scott Lahteine	d1f4c3d73b	Patch sync_plan_position comment	2016-09-18 12:58:41 -05:00
Scott Lahteine	0c25af30d4	Document homeaxis	2016-09-18 12:58:41 -05:00
Scott Lahteine	e7882e45e3	Document set_axis_is_at_home	2016-09-18 12:58:40 -05:00
Scott Lahteine	fef959c31a	Merge pull request #4834 from thinkyhead/rc_code_bool ... Standardize code_value_bool	2016-09-18 12:44:20 -05:00
Scott Lahteine	07ac9a1152	Merge pull request #4822 from blubbfish/patch-3 ... Tweak some german language strings	2016-09-18 11:38:22 -05:00
Scott Lahteine	661fe09ce7	Standardize code_value_bool	2016-09-18 11:32:32 -05:00
Scott Lahteine	20e5140e75	Merge pull request #4833 from thinkyhead/rc_no_scara_axis_scaling ... Remove SCARA axis_scaling	2016-09-18 11:31:50 -05:00
Scott Lahteine	a501f430eb	Enable M0/M1 with Emergency Parser	2016-09-18 11:14:10 -05:00
Philip Schell	cd8b22b527	Tweak some german language strings ... Change some string to get a better wording in german	2016-09-16 22:29:39 +02:00
Scott Lahteine	83a41c7ceb	Remove SCARA axis_scaling	2016-09-16 15:21:18 -05:00
Scott Lahteine	d41eeb62af	Merge pull request #4781 from thinkyhead/rc_final_z_correction ... Use simplified Z correction in G29 when possible	2016-09-16 15:14:19 -05:00
Scott Lahteine	502150046c	Merge pull request #4805 from thinkyhead/rc_config_adjustment ... Additional documentation of Configuration.h	2016-09-16 15:13:20 -05:00
Scott Lahteine	a1812b55f6	Space out array values	2016-09-16 14:41:05 -05:00
Scott Lahteine	d4599fd8ed	Comment patches to Configuration.h	2016-09-16 14:41:05 -05:00
Scott Lahteine	723e983073	Default EXTRUDE_MAXLENGTH to 200mm	2016-09-16 14:41:04 -05:00
Scott Lahteine	b08bd84f8e	Merge pull request #4806 from blubbfish/patch-2 ... Update language_de.h	2016-09-16 14:39:20 -05:00
darrelhunt	7b8bfa4358	Update pins_TEENSYLU.h	2016-09-16 11:26:37 -07:00
darrelhunt	829c8592f2	Update pins_TEENSY2.h	2016-09-16 11:26:09 -07:00
darrelhunt	e0aee20327	Update pins_SAV_MKI.h	2016-09-16 11:25:42 -07:00
darrelhunt	88d3fc0bcf	Update pins_PRINTRBOARD.h	2016-09-16 11:25:14 -07:00
darrelhunt	4277221abb	Update pins_BRAINWAVE_PRO.h	2016-09-16 11:24:32 -07:00
darrelhunt	b8ecbe9116	Update pins_BRAINWAVE.h	2016-09-16 11:23:52 -07:00
darrelhunt	60f757077e	Update pins_5DPRINT.h	2016-09-16 11:22:52 -07:00
Silvio Didonna	ff2b2d5939	Added missing translations	2016-09-16 01:17:58 +02:00
Philip Schell	2b11c3274c	Update language_de.h	2016-09-15 15:16:11 +02:00
Philip Schell	54e6d12382	Update language_de.h ... @MarlinFirmware/language-team updated german languagefile to the latest english version	2016-09-14 14:17:21 +02:00
Scott Lahteine	57564ae576	Use last probe point to correct Z when possible	2016-09-14 02:03:43 -05:00
Scott Lahteine	e40646de42	Merge pull request #4803 from thinkyhead/rc_lcd_button_fix ... Clear LCD button state, apply timer to all	2016-09-13 18:03:39 -05:00
Scott Lahteine	29f224594c	Fix some regressive typos in G29	2016-09-13 17:31:02 -05:00
Scott Lahteine	5ecc7d9f25	Clear LCD button state, apply timer to all ... Addressing #3007	2016-09-13 16:10:27 -05:00
Scott Lahteine	9b0931ef74	Apply fixed EXTRUDER_RUNOUT_PREVENT	2016-09-13 03:33:04 -05:00
Scott Lahteine	b1a60e8954	Reformat, rearrange, tweak, and document ... - Add comments to several functions - Add an option to use Fast SQRT for Delta IK - Group related functions together - Outdent some leveling-related functions	2016-09-13 03:33:04 -05:00
Scott Lahteine	61284cbd8c	Various code style adjustments	2016-09-13 03:33:04 -05:00
Scott Lahteine	788a16fc46	Clean up serial out code	2016-09-13 03:33:03 -05:00
Scott Lahteine	0e38bea79d	Shrink 3-point leveling code	2016-09-13 03:33:03 -05:00
Scott Lahteine	4f75ce6957	Unify reset_bed_level for linear/non-linear	2016-09-13 03:33:03 -05:00
Scott Lahteine	41d8149bce	Sanity check for more than 1 controller	2016-09-13 03:33:02 -05:00
Scott Lahteine	40785ce8ac	Use count method for kinematic sanity check	2016-09-13 03:33:02 -05:00
Scott Lahteine	3236762e07	Clean up sanity check for LCD_PROGRESS_BAR	2016-09-13 03:33:02 -05:00
Scott Lahteine	a9ed23225f	bed_level => bed_level_grid	2016-09-13 03:33:02 -05:00
Scott Lahteine	82be65065c	Fix up untilted_stepper_position and set_current_from_steppers_for_axis	2016-09-13 03:33:01 -05:00
Scott Lahteine	d65f5d816f	Patch to fix kinematics	2016-09-13 03:33:01 -05:00
Scott Lahteine	e529c6407e	Rename set_cartesian_from_steppers, cartesian_position	2016-09-13 03:33:01 -05:00
Scott Lahteine	c109399bf6	Fix planner leveling and rename arguments ... Use lx, ly, lz for “logical” positions	2016-09-13 03:33:01 -05:00
Scott Lahteine	d4f21af6b3	sync_plan_position_delta => sync_plan_position_kinematic	2016-09-13 03:33:01 -05:00
Scott Lahteine	acd1b6e9c0	Rename delta_grid spacing for general nonlinear	2016-09-13 03:33:00 -05:00
Scott Lahteine	c5fa70809b	Implement M0/M1 for EMERGENCY_PARSER	2016-09-13 03:33:00 -05:00
Scott Lahteine	786d1afb72	Add position_is_reachable, use in home_z_safely	2016-09-13 03:33:00 -05:00
Scott Lahteine	b4034915f8	Move z safe homing to its own function	2016-09-13 03:33:00 -05:00
Scott Lahteine	c84b14c77a	Move delta homing to its own function	2016-09-13 03:32:59 -05:00
Scott Lahteine	f9a192c7e3	Move setup() and loop() to the end	2016-09-13 03:32:59 -05:00
Scott Lahteine	8ff338c2b9	Patch stepper.h for SCARA	2016-09-13 03:32:59 -05:00
Scott Lahteine	74d7f5e57b	Patch SCARA example config	2016-09-13 03:32:59 -05:00
Scott Lahteine	6ab54c60b1	Add conditionals for kinematics, leveling	2016-09-13 03:32:59 -05:00
Scott Lahteine	21514568fd	Add enum for ALL_AXES	2016-09-13 03:32:58 -05:00
Scott Lahteine	413b61e64a	Add HYPOT2 and float comparison macros	2016-09-13 03:32:58 -05:00
Scott Lahteine	a6f6ed352b	Fix comment on FILAMENT_RUNOUT_SENSOR	2016-09-13 02:14:34 -05:00
Scott Lahteine	48e14d049a	Merge pull request #4710 from thinkyhead/rc_fix_leveling_maths ... Bed leveling that accounts for home XYZ	2016-09-10 15:47:39 -05:00
Scott Lahteine	416821a71c	Merge pull request #4765 from thinkyhead/rc_endstop_direction ... Sanitycheck endstop plugs based on homing direction	2016-09-10 14:49:50 -05:00
Scott Lahteine	9248cfb0ad	Bed leveling that accounts for home XYZ	2016-09-10 13:47:21 -05:00
Scott Lahteine	6ac9d895ca	Tweak Filament Width variables	2016-09-10 13:29:25 -05:00
Scott Lahteine	68ba45572e	Don't say "heating complete" unless done	2016-09-10 13:29:25 -05:00
Scott Lahteine	2bfc6fe1b0	Move XYZ constants closer to the top	2016-09-10 13:25:44 -05:00
Scott Lahteine	12b94e419f	Sanitycheck endstop plugs based on homing direction	2016-09-08 13:56:32 -05:00
Scott Lahteine	29c4f67a29	Additional path - followup to #4743	2016-09-07 15:08:12 -05:00
Robert Bartl	494d5770b8	makefile fix for arduino 1.6.9 unzipped	2016-09-03 19:45:27 -05:00
Scott Lahteine	6f71bd7372	Merge pull request #4754 from thinkyhead/rc_mixing_regression ... Unify counter_m and counter_M	2016-09-02 12:27:43 -05:00
Scott Lahteine	9bf78ef465	Fix capitalization of counter_m	2016-09-02 11:31:45 -05:00
Scott Lahteine	42b5616327	Try bool for direction instead of long	2016-09-02 11:28:48 -05:00
Scott Lahteine	cbe9ab902c	Merge pull request #4747 from thinkyhead/rc_sd_show_percent ... Option to show SD percent on Graphical LCD	2016-09-02 07:44:42 -05:00
Scott Lahteine	f20b2b21eb	Optimize LCD string/char printing	2016-09-02 06:41:24 -05:00
Scott Lahteine	3b2f7ba225	Merge pull request #4748 from thinkyhead/rc_sd_print_timer ... Patch duration_t toDigital method	2016-09-02 04:41:11 -05:00
Kai	445d8215e4	Option to show SD percent on Graphical LCD	2016-09-02 02:17:36 -05:00
Scott Lahteine	d07a913f21	Tweak to stepper advance e_steps update	2016-09-02 02:06:17 -05:00
Scott Lahteine	aaef7c6b89	Fix a misspelling of minimum	2016-09-02 01:42:38 -05:00
Scott Lahteine	ad659b5f91	Merge pull request #4725 from thinkyhead/rc_log_machine_info ... Log machine info in G28 and G29	2016-09-01 23:58:59 -05:00
Scott Lahteine	c6859a1e54	Handle hours >= 100	2016-09-01 23:54:48 -05:00
Kai	9f706a9635	Patch duration_t toDigital method	2016-09-01 23:34:15 -05:00
Scott Lahteine	c3caa42630	Merge pull request #4738 from thinkyhead/rc_ensure_floats ... Optimize stepper ISRs, plus cleanup, shorthand	2016-09-01 14:36:22 -05:00
Scott Lahteine	426f662586	Apply MINIMUM_STEPPER_PULSE in stepper advance_isr	2016-08-30 14:31:48 -05:00
Scott Lahteine	8c7ee4599e	Optimize stepper advance_isr	2016-08-30 14:31:48 -05:00
Scott Lahteine	9725bcd099	Minor "optimizations" in stepper ISR	2016-08-30 14:21:43 -05:00
Scott Lahteine	4ec3d1ea58	Add some commentary to stepper ISR	2016-08-30 14:21:15 -05:00
Scott Lahteine	d9bcc7bb45	Set a bool when a stepper block is done	2016-08-30 14:20:48 -05:00
Scott Lahteine	08f717e5f7	Use bit-size typedefs for some stepper vars	2016-08-30 14:19:49 -05:00
Scott Lahteine	d554c1dda8	Clean up planner kernel pass methods	2016-08-30 14:16:13 -05:00
Scott Lahteine	b2e5ec85d7	Add [XYZ]_CENTER conditionals	2016-08-30 14:15:41 -05:00
Scott Lahteine	7e20448a2d	Add HOMING_Z_WITH_PROBE conditional	2016-08-30 13:29:26 -05:00
Scott Lahteine	0e4107da34	Minor cleanup of homeaxis, etc.	2016-08-30 13:29:26 -05:00
Scott Lahteine	f1201e11c7	Improve the Jerk description	2016-08-29 12:39:21 -05:00
Scott Lahteine	3f038bef00	Heading for movement settings	2016-08-29 02:01:34 -05:00
Scott Lahteine	fd2269f489	Log machine info in G28 and G29	2016-08-28 20:48:28 -05:00
Scott Lahteine	6eaf4f4909	Fix spacing of debug output in homeaxis	2016-08-28 19:43:33 -05:00
Scott Lahteine	1e6d1c39ea	Improve verbiage of dropsegments sanity error	2016-08-28 19:40:32 -05:00
Scott Lahteine	0729a8f08d	Use the probe travel height for pre-probe move ... Instead of using the home_bump for Z to move close to the bed before doing a slow probe, use the probe travel height.	2016-08-28 19:13:08 -05:00
Scott Lahteine	dd94d0b9d5	Fix bed probing bug without PROBE_DOUBLE_TOUCH ... If `PROBE_DOUBLE_TOUCH` wasn't enabled, the probe move could be way too short! See #4701 for example.	2016-08-28 19:00:25 -05:00
Scott Lahteine	35a0c46f16	Tweak debug output for probe in G29	2016-08-28 18:44:44 -05:00
Scott Lahteine	a82a89bc58	Merge pull request #4722 from thinkyhead/rc_minimum_stepper_pulse ... MINIMUM_STEPPER_PULSE option	2016-08-28 10:03:32 -05:00
Scott Lahteine	a2572d2854	Fix Danish encoding and an error message	2016-08-28 09:51:06 -05:00
Scott Lahteine	759234af60	MINIMUM_STEPPER_PULSE option	2016-08-27 23:58:40 -05:00
Scott Lahteine	2cb63f0bf7	Merge pull request #4719 from thinkyhead/rc_delta_homing_patch ... Marlin patches for homing, esp. Delta	2016-08-27 20:46:50 -05:00
Scott Lahteine	8241cf9901	Merge pull request #4720 from thinkyhead/rc_allow_stepper_omission ... Patch stepper.cpp to allow omitting steppers	2016-08-27 20:36:22 -05:00
Scott Lahteine	7e893f4309	Merge pull request #4721 from thinkyhead/rc_temperature_isr_comments ... Rc temperature isr comments	2016-08-27 20:36:03 -05:00
Scott Lahteine	73d86098b7	Marlin patches for homing, esp. Delta	2016-08-27 20:32:05 -05:00
Scott Lahteine	338bc768b1	Merge pull request #4717 from thinkyhead/rc_log_the_probe ... Debug logging of nozzle type and offsets	2016-08-27 20:24:19 -05:00
Scott Lahteine	fae92e3f3c	Merge pull request #4718 from thinkyhead/rc_twibus_patch_20160827 ... TWIBus patch for proper use of Wire.requestFrom	2016-08-27 20:22:53 -05:00
Scott Lahteine	a485a19052	Added optional planner logging	2016-08-27 20:12:22 -05:00
Scott Lahteine	e9bfca5870	Additional comments for Temperature::isr	2016-08-27 20:12:22 -05:00
Scott Lahteine	a255945f29	Add DEBUG_ALL enum	2016-08-27 20:12:22 -05:00
Scott Lahteine	a28e15399f	Patch stepper.cpp to allow omitting steppers	2016-08-27 20:11:17 -05:00
Scott Lahteine	2b226bc5c2	TWIBus patch for proper use of Wire.requestFrom	2016-08-27 20:09:28 -05:00
Scott Lahteine	d641344d3a	Remove redundant probe offset in homing	2016-08-27 19:58:56 -05:00
Scott Lahteine	fb19a3cdec	Merge pull request #4649 from thinkyhead/rc_boelle_danish_update ... Danish update (18 Aug 2016)	2016-08-27 19:06:05 -05:00
Scott Lahteine	00638131e5	Debug logging of nozzle type and offsets	2016-08-27 15:21:01 -05:00
Scott Lahteine	8e9ac72191	Merge pull request #4709 from thinkyhead/rc_log_the_reason ... Log whether homing with probe or endstop	2016-08-26 17:05:55 -05:00
Scott Lahteine	991a34aff2	Log whether homing with probe or endstop	2016-08-26 15:50:10 -05:00
Scott Lahteine	3b93b79f5c	Merge pull request #4703 from bgort/RCBugFix ... Add note suggesting RAMBo users use the RAMBo board type or platformio environment	2016-08-26 14:53:56 -05:00
Scott Lahteine	00cdb15cec	Move invariant LCD strings to language.h	2016-08-26 02:48:57 -05:00
Bo Herrmannsen	d2ae5b00d9	Danish up to date (18 Aug 2016)	2016-08-26 02:48:57 -05:00
Scott Lahteine	e78274a7f4	Consistent order/formatting of pins files	2016-08-25 20:59:45 -05:00
Scott Lahteine	11e9530111	Properly handle probe pin for BQ printers	2016-08-25 20:59:44 -05:00
Scott Lahteine	1968983f35	Move PROBE_SELECTED to an earlier point	2016-08-25 20:59:44 -05:00
Brian	2fae32f35f	Add note suggesting RAMBo users use the RAMBo board type or platformio environment; ... Add note that Viki 2.0 wiring diagram v1.2 has a mistake in it;	2016-08-25 15:05:29 -04:00
esenapaj	1749a7fae3	Suppress warning	2016-08-24 00:18:06 +09:00
Scott Lahteine	d07d85ac9f	Ensure probe points at the delta edge are kept	2016-08-23 05:09:56 -05:00
AnHardt	7e36b76af2	Repair MarlinSerial with TX-buffer ... These '{' are important to avoid the redefinition of `unsigned char _sreg = SREG;` at the same level. Used in ``` #define CRITICAL_SECTION_START unsigned char _sreg = SREG; cli(); ```	2016-08-22 23:40:09 +02:00
Gege2B	1e65f1a1d8	Update french language	2016-08-22 12:46:58 -05:00
Scott Lahteine	ab59280075	MIN_SEGMENTS_FOR_MOVE => MIN_STEPS_PER_SEGMENT ... Follow-up to #4666	2016-08-21 08:56:03 -05:00
Scott Lahteine	27b80b1dd1	Merge pull request #4667 from thinkyhead/rc_M211_sw_endstop_switch ... M211: Enable/Disable Software Endstops	2016-08-21 06:44:00 -05:00
Scott Lahteine	14a03727e1	Tweak serialprintPGM	2016-08-21 00:10:09 -05:00
Scott Lahteine	2f223b8c79	Use ABC and XYZ for "3"	2016-08-21 00:10:08 -05:00
Scott Lahteine	4cd1ad8f28	Adjustments to M209, G28, M605	2016-08-21 00:10:08 -05:00
Scott Lahteine	e354cf5884	Apply sw_endstops_enabled to manual move	2016-08-21 00:10:08 -05:00
Scott Lahteine	280534c06f	Add M211: Enable/Disable Software Endstops	2016-08-21 00:10:08 -05:00
Scott Lahteine	01d4703429	PREVENT_DANGEROUS_EXTRUDE => PREVENT_COLD_EXTRUSION ... Also improve the documentation of this and related options, and set EXTRUDE_MINTEMP to 170 everywhere.	2016-08-20 23:35:27 -05:00
Scott Lahteine	a1f6cf1e5d	Merge pull request #4665 from thinkyhead/rc_lcd_not_ultipanel ... Clean up ultralcd code, dependencies on ULTIPANEL	2016-08-20 22:43:17 -05:00
Scott Lahteine	1a255afa36	Merge pull request #4666 from thinkyhead/rc_dropsegments_adj ... dropsegments => MIN_SEGMENTS_FOR_MOVE	2016-08-20 22:42:16 -05:00
Scott Lahteine	374f8d2014	dropsegments => MIN_SEGMENTS_FOR_MOVE	2016-08-20 18:52:15 -05:00
Scott Lahteine	76c3f326ff	Clean up DOGM code, comments	2016-08-20 18:33:12 -05:00
Scott Lahteine	71319adbb8	Wrap ULTIPANEL-dependent code	2016-08-20 18:33:11 -05:00
Scott Lahteine	305913545e	Move number-to-string function to utility.*	2016-08-20 18:33:11 -05:00
Scott Lahteine	394c80c87b	Merge pull request #4655 from thinkyhead/rc_serial_static ... Optimize, reduce size of MarlinSerial	2016-08-20 15:51:57 -05:00
MagoKimbra	28d1e5a946	Fix_Zig_Zag	2016-08-20 11:28:08 +02:00
Scott Lahteine	14395a1a96	Optimize, reduce size of MarlinSerial	2016-08-19 16:53:20 -05:00
Scott Lahteine	4d4c00d69c	Merge pull request #4651 from thinkyhead/rc_homing_vs_leveling_z ... Improvements to homing / leveling	2016-08-19 15:45:49 -05:00
Brian Gortney	8fae3e1f9f	Add Rambo support/env to platformio.ini; properly maps extended pins	2016-08-19 07:11:23 -04:00
Scott Lahteine	12d72363cb	Do Delta radius check without sqrt	2016-08-19 05:05:48 -05:00
Scott Lahteine	044f800be9	Use SERIAL_PROTOCOLLNPGM in G28	2016-08-19 04:45:33 -05:00
Scott Lahteine	d309a9647d	Include probe offset for moving "close to the bed"	2016-08-19 04:45:33 -05:00
Scott Lahteine	35a08eeaeb	Use Z_HOME_DIR over axis_home_dir where we can	2016-08-19 04:45:32 -05:00
Scott Lahteine	99b22d5785	Default AUTO_BED_LEVELING_GRID_POINTS to 3	2016-08-19 04:45:32 -05:00
Scott Lahteine	9b1f3f7d12	Sanity-check DELTA + AUTO_BED_LEVELING_GRID_POINTS	2016-08-19 04:45:32 -05:00
Scott Lahteine	733453569b	Merge pull request #4650 from thinkyhead/rc_percent_is_percent ... extruder_multiplier => flow_percentage	2016-08-19 04:38:18 -05:00
Scott Lahteine	55355a4fb8	Make probed points more symmetrical	2016-08-19 04:32:03 -05:00
Scott Lahteine	1f776f6034	Tweak some code comments	2016-08-19 04:32:02 -05:00
Scott Lahteine	748228cf40	Use named indices for delta_grid_spacing	2016-08-19 04:32:02 -05:00
Scott Lahteine	ead333e7da	line_to_axis_pos => do_homing_move	2016-08-19 04:32:02 -05:00
Scott Lahteine	7a4ccd7967	Add do_probe_move with Z fixes	2016-08-19 04:32:02 -05:00
Scott Lahteine	a1bad589c9	Augment debug/homing logging	2016-08-19 04:32:02 -05:00
Scott Lahteine	41b5c48129	Update software endstops if EEPROM is loaded	2016-08-19 04:32:01 -05:00
Scott Lahteine	628dcbc764	extruder_multiplier => flow_percentage	2016-08-18 22:13:47 -05:00
Jason Westervelt	d222ee4de2	Update language_ru.h ... Updated missing translations. Caught up on change to MSG_HOME.	2016-08-17 13:55:44 -07:00
Scott Lahteine	d63b8e2b2b	Additional details for I2C_SLAVE_ADDRESS	2016-08-15 19:27:53 -07:00
Scott Lahteine	7427290d3a	Merge pull request #4634 from thinkyhead/rc_lang_disp_char ... Set language display charset in language.h	2016-08-15 19:25:56 -07:00
Scott Lahteine	aa30550b21	Keep SIMULATE_ROMFONT only language.h	2016-08-15 19:11:31 -07:00
Scott Lahteine	cec61c350d	Set language display charset in language.h	2016-08-15 19:01:12 -07:00
Scott Lahteine	165d7abb1b	Merge pull request #4625 from thinkyhead/rc_i2c_request_capture_flush ... Add request, capture, flush to TWIBus	2016-08-15 18:15:43 -07:00
RicardoGA	507784b846	Fix Messages length	2016-08-15 10:30:51 -05:00
Scott Lahteine	bd928a69ec	Add request, capture, flush to TWIBus	2016-08-15 00:04:20 -07:00
RicardoGA	7b7f319ed5	Update Spanish Lenguage ... Adds missing messages	2016-08-14 23:30:43 -05:00
Scott Lahteine	132322e4d9	Fix #4614: currentScreen only defined with ULTIPANEL	2016-08-14 00:29:46 -07:00
Scott Lahteine	dcd26b0403	Merge pull request #4621 from thinkyhead/rc_fan_set_output ... Init PWM-able AUTO_FAN pins with SET_OUTPUT	2016-08-13 21:22:27 -07:00
Scott Lahteine	79ba983782	Allow reply() to use const string with no warning	2016-08-13 21:05:44 -07:00
Scott Lahteine	3a0a94b21a	Always init configured fan pins	2016-08-13 20:38:40 -07:00
Scott Lahteine	c63003ed3e	Use matching auto-fan flags	2016-08-13 20:38:40 -07:00
Scott Lahteine	3475fd7b0f	Init PWM-able auto fan pins with SET_OUTPUT	2016-08-13 20:38:40 -07:00
Scott Lahteine	abf9696db1	Loop fan-pins based on array size	2016-08-13 20:05:32 -07:00
Scott Lahteine	e88575c8ec	Init next_auto_fan_check_ms to zero	2016-08-13 20:05:32 -07:00
Scott Lahteine	7272ec5608	Update HAS_FAN flags for 4 auto fans	2016-08-13 20:05:32 -07:00
Scott Lahteine	7b21811a9a	Flags for matching auto-fans	2016-08-13 20:05:32 -07:00
Scott Lahteine	97e0aed304	Further refinements of TWIBus	2016-08-13 18:32:41 -07:00
Scott Lahteine	38fa1b1939	Merge pull request #4196 from cimbalo/Platformio_support ... Add working PlatformIO support	2016-08-12 17:32:09 -07:00
Scott Lahteine	d7edc039af	Merge pull request #4605 from thinkyhead/rc_3drag_fan_is_8 ... Fixup 3DRAG pins based on updated RAMPS pins	2016-08-12 17:30:27 -07:00
Silvio	923388e0c7	Fix acceleration and feedrate following bq/Marlin	2016-08-12 15:42:20 +02:00
Scott Lahteine	405afec393	Include decimeters in filamentUsed display	2016-08-12 05:16:43 -07:00
Scott Lahteine	fef0e8ba86	Merge pull request #4610 from thinkyhead/rc_sd_pause_and_stop ... Fix stopSDPrint so it works when paused	2016-08-12 04:09:22 -07:00
Scott Lahteine	192ac2dfd7	Squish some CardReader code	2016-08-12 03:32:42 -07:00
Scott Lahteine	61932b859e	Fix bug in CardReader::stopSDPrint ... If the SD print is paused, it cannot be stopped	2016-08-12 03:21:10 -07:00
Scott Lahteine	9e5d5a3b7c	Merge pull request #4597 from tnw513/italian_fix ... Added hyphenated strings for full graphic display	2016-08-12 02:37:53 -07:00
Silvio Didonna	f999292eea	added hyphenated letters for full graphic display and fixed some strings	2016-08-12 08:57:22 +02:00
Scott Lahteine	67f119d18b	Add an i2c request handler	2016-08-11 18:09:18 -07:00
Scott Lahteine	2d3db5b5bd	Fixup pins_3DRAG based on updated RAMPS pins	2016-08-11 15:49:47 -07:00
Scott Lahteine	d29a64d4b3	Merge pull request #4603 from thinkyhead/rc_less_MSG_MOVE ... Strip never-translated strings from language files	2016-08-11 14:21:58 -07:00
Scott Lahteine	d6a7ca6553	Merge pull request #4584 from thinkyhead/rc_delta_cal_more ... Use configured feedrates, center in DELTA_CALIBRATION_MENU	2016-08-11 14:04:05 -07:00
Scott Lahteine	d3b432adca	Strip never-translated strings from language files	2016-08-11 13:41:07 -07:00
Scott Lahteine	1a558ef486	Tweak MarlinSerial precursor	2016-08-11 12:47:06 -07:00
Scott Lahteine	802818f7ab	Cleanup SdFatUtil.h	2016-08-11 12:47:06 -07:00
Scott Lahteine	52560e257f	Merge pull request #4595 from thinkyhead/rc_i2c_slave ... Add support for i2c slave address	2016-08-11 12:39:26 -07:00
Scott Lahteine	432e9a1f50	Use configured feedrates, center for DELTA_CALIBRATION_MENU	2016-08-11 12:05:55 -07:00
Scott Lahteine	cd496dd9bd	do_blocking_move_to can't be 'inline', takes const ref args	2016-08-11 12:05:55 -07:00
Scott Lahteine	dd75fca4d9	Make M155 / M156 a bit more flexible	2016-08-11 00:52:01 -07:00
Scott Lahteine	a99ecf71d8	Add support for i2c slave address	2016-08-10 23:30:35 -07:00
Scott Lahteine	b63d70b186	Fix serial output for MBL, M303	2016-08-10 18:49:52 -07:00
Scott Lahteine	a36a168af2	Use the truly configured middle on Delta	2016-08-10 00:03:22 -07:00
Scott Lahteine	58c8e6cef2	Fixes #4576: Convert filamentUsed to long for display	2016-08-09 23:57:28 -07:00
Scott Lahteine	01f1f779a5	Followup to #4574, specify L for long	2016-08-09 23:43:37 -07:00
Kaibob2	1c7bd17e60	Update language_de.h with MSG_MOVE_E1 - E4 ... MSG_MOVE_E1 was missing MSG_MOVE_E2 was missing MSG_MOVE_E3 was missing MSG_MOVE_E4 was missing I assigned "0" to "MSG_MOVE_E1", "1" to "MSG_MOVE_E2" and so on, as this is what i assume to be the standard naming for the first (E0) and second (E1) extruder. This would have to be changed inthe other languages too :(	2016-08-09 20:49:26 +02:00
Scott Lahteine	880cdb553b	Include days in Graphical LCD print timer	2016-08-08 23:21:36 -07:00
Scott Lahteine	f4ac8c15e3	Merge pull request #4573 from thinkyhead/rc_mintemp_bed_later ... Throw MINTEMP BED error only if heating	2016-08-08 23:02:42 -07:00
Scott Lahteine	b7b5b50a84	Throw bed min temp error only if heating	2016-08-08 22:49:22 -07:00
Scott Lahteine	d3ba878f70	Drop intermediate float in HEATER_0_USES_MAX6675 test	2016-08-08 22:49:22 -07:00
Scott Lahteine	3e8f9ecd1c	Extend min/max_temp_error for the bed	2016-08-08 22:49:21 -07:00
Scott Lahteine	1f15f0df5f	Merge pull request #4572 from thinkyhead/rc_digital_clock_100h ... Show up to 99:59 in digital time	2016-08-08 22:28:29 -07:00
Scott Lahteine	8100a4dace	Fix a compile error in EMERGENCY_PARSER sanity check	2016-08-08 21:49:57 -07:00
Scott Lahteine	45f67164b6	Simplify the delay in kill()	2016-08-08 21:49:34 -07:00
Scott Lahteine	30b1c731b5	Show up to 99:59 in digital time	2016-08-08 21:26:34 -07:00
Scott Lahteine	3be4511230	Patch command order in delta calibration menu	2016-08-08 21:15:25 -07:00
Scott Lahteine	9afa060ed6	Merge pull request #4570 from thinkyhead/rc_proper_delta_calibration ... Make DELTA_CALIBRATION_MENU more universal	2016-08-08 21:11:40 -07:00
Scott Lahteine	46c8862635	Merge pull request #4564 from AnHardt/max-spi-setup ... MISO is an input	2016-08-08 21:01:15 -07:00
Scott Lahteine	88540d8ecf	Fix: LCD displays SD status at startup	2016-08-08 20:53:18 -07:00
Scott Lahteine	b16ea09498	Make DELTA_CALIBRATION_MENU more universal	2016-08-08 20:42:58 -07:00
Scott Lahteine	3a56836ead	Always disable SLOWDOWN for DELTA/SCARA	2016-08-08 18:06:46 -07:00
AnHardt	aa9b52b2e7	MISO is an input	2016-08-08 20:09:57 +02:00
Scott Lahteine	67c4acf750	Merge pull request #4562 from thinkyhead/rc_fix_z_dual_endstops ... Fix Z_DUAL_ENDSTOPS with Z MIN Homing	2016-08-07 19:23:09 -07:00
Scott Lahteine	e113740fa3	Specify that Z_PROBE_*_HEIGHT is nozzle-relative	2016-08-07 17:54:17 -07:00
Scott Lahteine	462e189edd	Move pullups after Z_DUAL_ENDSTOPS block	2016-08-07 17:43:02 -07:00
Scott Lahteine	367dad5902	Sanity check Z_DUAL_ENDSTOPS with DELTA	2016-08-07 17:08:41 -07:00
Scott Lahteine	5fca110e0d	Fix Z_DUAL_ENDSTOPS with MIN homing	2016-08-07 17:08:41 -07:00
Scott Lahteine	fc11f05c11	Merge pull request #4556 from thinkyhead/rc_all_feedrates_mm_s ... Within Marlin, maintain most feed rates in mm/s	2016-08-07 16:14:16 -07:00
Scott Lahteine	7b2abe6fc8	Use steps_to_mm in extruder runout prevent	2016-08-07 00:28:52 -07:00
Scott Lahteine	d320065320	Within Marlin, maintain most feed rates in mm/s	2016-08-07 00:28:52 -07:00
Scott Lahteine	ed0b50ebee	Merge pull request #4555 from thinkyhead/rc_mbl_index_rounding ... Remove premature int-cast from MBL cell index methods	2016-08-06 23:34:01 -07:00
Scott Lahteine	bad286d52f	Save CPU by multiplying by pre-compiled values	2016-08-06 23:24:07 -07:00
Scott Lahteine	dce6026e0e	Remove premature cast to int	2016-08-06 23:01:29 -07:00
Scott Lahteine	cffe77c537	Merge pull request #4553 from thinkyhead/rc_lcd_chars_save_ram ... Save bytes for custom chars (Hitachi LCD)	2016-08-06 18:29:16 -07:00
Scott Lahteine	42927530fe	Explicitly clear the screen in lcd_goto_screen	2016-08-06 18:10:39 -07:00
Scott Lahteine	a6d2c2479f	Minor cleanup of lcd_goto_screen calls	2016-08-06 18:10:39 -07:00
Scott Lahteine	e47c8b9829	Save bytes for custom chars (Hitachi LCD)	2016-08-06 18:10:39 -07:00
Scott Lahteine	0ff5005c9b	Allow connector flexibility for BQ ZUM Mega	2016-08-06 17:19:12 -07:00
Scott Lahteine	98437bd488	Allow override of CONTROLLERFAN_PIN with RAMPS EFF	2016-08-06 17:19:12 -07:00
Scott Lahteine	93eafa1785	Use DISABLED to check TEENSY pin option	2016-08-06 17:19:12 -07:00
AnHardt	98392abb78	Clean warnings for pins_BQ_ZUM_MEGA_3D.h	2016-08-06 17:19:12 -07:00
AnHardt	98e96feee9	Repair SPI-pins ... SCK_PIN can't be defined as DIO[number] they mus be defined as pure number. So rebuilding the structure of fastio.h in pins.h.	2016-08-06 17:19:11 -07:00
Scott Lahteine	a00783c41f	Format probe stowed test code	2016-08-06 14:31:07 -07:00
AnHardt	f37e8a31d7	Make Allen Key Probe stow ... by switching off the tests for the probe before the stow move.	2016-08-06 14:30:38 -07:00
Scott Lahteine	5347f39fce	Merge pull request #4542 from AnHardt/rep-de ... Repair-language.de	2016-08-05 23:50:35 -07:00
Scott Lahteine	5ef4a5577c	Merge pull request #4537 from thinkyhead/rc_fix_some_flaws ... Patch up some flaws here and there	2016-08-05 23:49:57 -07:00
AnHardt	0d3b67a580	Repair-language.de	2016-08-06 01:00:40 +02:00
Scott Lahteine	938e6d15c4	Patch up some flaws, here and there	2016-08-05 08:17:37 -07:00
Scott Lahteine	3a3984e67a	Merge pull request #4535 from thinkyhead/rc_old_symbols_first ... Move tests for old symbols to the top of sanity check	2016-08-04 21:24:02 -07:00
Scott Lahteine	d7b882e430	Move tests for old symbols to the top of sanity check	2016-08-04 21:03:55 -07:00
Scott Lahteine	479107d04f	Merge pull request #4530 from Kaibob2/patch-1 ... Added / Update language_de.h	2016-08-04 16:58:50 -07:00
Kaibob2	1abd7fa670	Update language_de.h ... Added german translation for MSG_INFO_PRINT_LONGEST and MSG_INFO_PRINT_FILAMENT. MSG_HEATING_COMPLETE changed from "Aufgeheizt" to "Extr. aufgeheizt" MSG_HEATING changed from "Aufheizen" to "Extr. aufheizen"	2016-08-04 09:40:38 +02:00
Scott Lahteine	7e2bd9a233	Z_RAISE_PROBE_* => Z_PROBE_*_HEIGHT	2016-08-03 21:18:38 -07:00
Scott Lahteine	445458c221	Don't include zprobe_zoffset in do_probe_raise	2016-08-03 21:12:02 -07:00
Rafa Couto	0114676953	Update of Galician language 2016-08-03	2016-08-03 15:00:18 +02:00
Scott Lahteine	bd7a96ed42	Merge pull request #4517 from thinkyhead/rc_min_probe_pin ... Define Z_MIN_PROBE_PIN always, allowing override	2016-08-02 21:35:59 -07:00
Scott Lahteine	704ae1b737	Merge pull request #4516 from thinkyhead/rc_short_prints_quiet ... Only report finished prints longer than 1 min	2016-08-02 21:14:30 -07:00
Scott Lahteine	7ed70305df	Merge pull request #4515 from thinkyhead/rc_fix_speaker_tone ... Prevent the 'tone(f,d)' function from being interrupted	2016-08-02 21:13:47 -07:00
Scott Lahteine	f1be87a85c	Move probe pin sanity checks out of ABL block	2016-08-02 20:55:17 -07:00
Scott Lahteine	9cb596e88c	Define Z_MIN_PROBE_PIN always, allowing override	2016-08-02 20:31:44 -07:00
Scott Lahteine	229f70f194	Only report finished prints longer than 1 min	2016-08-02 19:58:12 -07:00
Scott Lahteine	e040e00ae9	Merge pull request #4514 from thinkyhead/rc_cleanup_circularqueue ... Patch up CircularQueue	2016-08-02 19:42:38 -07:00
Scott Lahteine	6110d57c16	Prevent the 'tone(f,d)' function from being interrupted	2016-08-02 19:37:47 -07:00
Scott Lahteine	b73203a0b7	Move some includes around to uncover missing deps	2016-08-02 19:37:46 -07:00
Scott Lahteine	f26d5425bf	Patch up CircularQueue ... - Use `size` and `count` instead of `length` and `size` - Fix bug: `peek` should return the item - Clean up comments, spacing, spelling	2016-08-02 18:57:15 -07:00
Scott Lahteine	c9123adc59	Improved SCREEN / MENU macros	2016-08-02 18:05:34 -07:00
Scott Lahteine	cebeb48005	Merge pull request #4511 from thinkyhead/rc_encoder_flex ... Allow encoder pulse/step override for more LCDs	2016-08-02 16:50:50 -07:00
Scott Lahteine	3cccaa9885	Allow encoder pulse/step override for more LCDs	2016-08-02 15:57:26 -07:00
Scott Lahteine	14c5a46ee9	Use multiplication for MMM_SCALED	2016-08-02 15:05:17 -07:00
Scott Lahteine	d8945e8464	Fix Z_HEAD index for COREYZ	2016-08-02 15:05:17 -07:00
Scott Lahteine	0f030aface	Merge pull request #4503 from AnHardt/fix-retract ... Correct typo in retract()	2016-08-02 15:04:55 -07:00
Scott Lahteine	fbd8f06951	Merge pull request #4506 from thinkyhead/rc_buzzer_needs_beeper ... Buzzer requires BEEPER_PIN	2016-08-02 14:40:43 -07:00
Scott Lahteine	330f82971b	Buzzer requires BEEPER_PIN	2016-08-02 14:05:37 -07:00
Scott Lahteine	e0d7b8bf27	Fix Azteeg X3 servo pin / Viki i2c	2016-08-02 14:05:37 -07:00
Scott Lahteine	7cceb15925	Merge pull request #4505 from thinkyhead/rc_auto_select_dplugs ... Auto-select power plugs for RAMPS derivatives	2016-08-02 12:56:52 -07:00
Scott Lahteine	593b37519a	Boards with 4 power outputs are EFBF or EFBE	2016-08-02 12:34:28 -07:00
AnHardt	9ab94bd2c1	fix-babysrepping	2016-08-02 21:06:42 +02:00
AnHardt	39c4603598	Correct typo in retract.	2016-08-02 21:06:08 +02:00
Scott Lahteine	cebd2bfff0	Auto-select power plugs for RAMPS derivatives	2016-08-02 11:59:25 -07:00
Scott Lahteine	34c60f1b55	Merge pull request #4491 from thinkyhead/rc_fix_lcd_move_e ... Use a default argument in _lcd_move_e	2016-08-01 16:45:25 -07:00
Scott Lahteine	38af251b91	Use a default argument in _lcd_move_e	2016-08-01 16:09:26 -07:00
Scott Lahteine	374ae6c099	Fix pins for RAMBO plus VIKI	2016-08-01 16:09:26 -07:00
Scott Lahteine	7594138740	Merge pull request #4493 from jbrazio/buildroot-cleanup ... Move font folder	2016-08-01 15:57:23 -07:00
Scott Lahteine	6eed37aafb	Merge pull request #4486 from thinkyhead/rc_pid_add_extrusion_rate_off ... PID_EXTRUSION_SCALING, disabled by default	2016-07-31 18:23:51 -07:00
Scott Lahteine	4bf3526d00	Merge pull request #4463 from thinkyhead/rc_azteeg_x3_eeb ... Wrangle RAMPS variants and derivatives	2016-07-31 18:22:49 -07:00
Scott Lahteine	1993c45759	Merge pull request #4487 from thinkyhead/rc_refresh_pos_fix ... Update refresh_positioning - no need for obj ref	2016-07-31 18:22:38 -07:00
Scott Lahteine	f83369b79c	Update refresh_positioning - no need for obj ref	2016-07-31 18:01:13 -07:00
Scott Lahteine	63fd1f49a6	PID_EXTRUSION_SCALING, disabled by default	2016-07-31 17:49:34 -07:00
Scott Lahteine	49997e2e22	HI_VOLT_PIN => "RAMPS_Dn_PIN"	2016-07-31 15:42:52 -07:00
AnHardt	60ad365e21	repair-software-spi	2016-07-31 15:50:42 +02:00
Scott Lahteine	f388beafa1	Merge pull request #4476 from otvald/RCBugFix ... FIX for endstop adjustemt on delta is offset	2016-07-31 01:09:54 -07:00
Scott Lahteine	3633d4978b	Merge pull request #4475 from esenapaj/Fix-for-PR-#4452 ... Fix for PR #4452 (Additional heater-state output changes)	2016-07-31 01:08:27 -07:00
Thomas Otvald Jensen	fe059f1221	During homing, line_to_axis_pos will make a path which moves across the ... endstop trigger point. The move is stopped at endstop, so current_position should also be adjusted to reflect this! Caused error in subsequent call in endstop adjustment, since the movement would assume a wrong starting position.	2016-07-30 16:50:31 +02:00
esenapaj	bd73e6d3c8	Fix for PR #4452 (Additional heater-state output changes) ... ・Add missing ';'	2016-07-30 22:49:30 +09:00
esenapaj	cd5b03d88f	Update distribution date and readme	2016-07-30 21:27:29 +09:00
Scott Lahteine	f575e92f2e	Merge pull request #4473 from esenapaj/Follow-up-the-PR-#4408-etc ... Follow-up the PR #4408 (Add support for reprapworld LCD), etc	2016-07-30 04:45:27 -07:00
esenapaj	657ef8aded	Follow-up the PR #4408 (Add support for reprapworld LCD), etc ... ・Put #define REPRAPWORLD_GRAPHICAL_LCD into all the example configuration files ・Adjust spacing	2016-07-30 20:32:57 +09:00
Scott Lahteine	83d341c394	Make Conditionals.h a catch-all for old configs	2016-07-30 04:25:30 -07:00
Scott Lahteine	de951c64f1	Make pins for EFF a consistent order	2016-07-30 04:17:21 -07:00
Scott Lahteine	49f75b7891	pins_RAMPS_14.h => pins_RAMPS.h	2016-07-30 04:17:21 -07:00
Scott Lahteine	d3b713cebc	Set flags for RAMPS "type" in pins.h	2016-07-30 04:17:21 -07:00
Scott Lahteine	223b7e473f	RAMPS assignment for derivatives	2016-07-30 04:17:21 -07:00
Scott Lahteine	3865843283	Consolidate setting of RAMPS High Voltage PWM outputs	2016-07-30 04:17:21 -07:00
Scott Lahteine	bdac2eb13a	Don't set non-existent SLED_PIN	2016-07-30 04:17:21 -07:00
Scott Lahteine	bfbd01e29a	Merge pull request #4470 from thinkyhead/rc_fix_manual_move ... Followup to #4468	2016-07-30 04:17:05 -07:00
Scott Lahteine	802d873fc1	Merge pull request #4469 from esenapaj/Fix-for-PR-#4453 ... Fix for PR #4453 (Improved MANUAL_[XYZ]_HOME_POS)	2016-07-30 04:08:54 -07:00
Scott Lahteine	8e2f095dde	Merge pull request #4456 from jbrazio/speaker-type3 ... Improvement to non-blocking speaker	2016-07-30 04:07:08 -07:00
Scott Lahteine	ad68b4cb8b	Followup to #4468	2016-07-30 03:49:42 -07:00
esenapaj	b8c112c490	Fix for PR #4453 (Improved MANUAL_[XYZ]_HOME_POS)	2016-07-30 19:37:43 +09:00
Scott Lahteine	2f76138645	Merge pull request #4468 from thinkyhead/rc_fix_manual_move ... Specify manual-movable E axes by extruder type	2016-07-30 03:21:43 -07:00
Scott Lahteine	696b63e300	Specify manual-movable E axes by extruder type	2016-07-30 00:36:48 -07:00
Scott Lahteine	46c33f1cfa	Merge pull request #4467 from jbrazio/safe_delay-millis_t ... Makes safe_delay() to be fully compatible with delay()	2016-07-29 20:23:44 -07:00
Scott Lahteine	9e21b2e51d	Merge pull request #4455 from AnHardt/double-bump-feature ... double bump probing as a feature	2016-07-29 20:00:10 -07:00
Scott Lahteine	db4d03bc81	Merge pull request #4452 from thinkyhead/rc_fix_heaterstates_part_2 ... Additional heater-state output changes	2016-07-29 19:58:00 -07:00
Scott Lahteine	c68ca95345	Merge pull request #4464 from thinkyhead/rc_fix_steps_per_mm_handling ... Account for DELTA in Planner::refresh_positioning	2016-07-29 19:34:59 -07:00
João Brázio	226e74a438	Fixes safe_delay() to be fully compatible with delay()	2016-07-30 02:56:26 +01:00
João Brázio	8e79e8cdb3	Adds types.h	2016-07-30 02:55:52 +01:00
Scott Lahteine	844a4e799e	Account for DELTA in Planner::refresh_positioning	2016-07-29 18:41:11 -07:00
AnHardt	7188ce0ad6	double bump probing as a feature ... Why double touch probing is not a good thing. It's widely believed we can get better __probing__ results when using a double touch when probing. Let's compare to double touch __homing__. Or better let's begin with single touch __homing__. We home to find out out position, so our position is unknown. To find the endstop we have to move into the direction of the endstop. The maximum way we have to move is a bit longer than the axis length. When we arrive at the endstop - when it triggers, the stepper pulses are stopped immediately. It's a sudden stop. No smooth deacceleration is possible. Depending on the speed and the moving mass we lose steps here. Only if we approached slow enough (below jerk speed?) we will not lose steps. Moving a complete axis length, that slow, takes for ever. To speed up homing, we now make the first approach faster, get a guess about our position, back up a bit and make a second slower approach to get a exact result without losing steps. What we do in double touch probing is the same. But the difference here is: a. we already know where we are b. if the first approach is to fast we will lose steps here to. But this time there is no second approach to set the position to 0. We are measuring only. The lost steps are permanent until we home the next time. So if you experienced permanently rising values in M48 you now know why. (Too fast, suddenly stopped, first approach) What can we do to improve probing? We can use the information about our current position. We can make a really fast, but deaccelerated, move to a place we know it is a bit before the trigger point. And then move the rest of the way really slow.	2016-07-30 03:00:49 +02:00
Scott Lahteine	c31f56a38c	Deprecate EXTRUDER_WATTS and BED_WATTS	2016-07-29 17:34:14 -07:00
Scott Lahteine	e1970b4b28	Show power output in same order as temp output	2016-07-29 14:55:22 -07:00
Scott Lahteine	74df828acc	Show ADC values inline rather than after	2016-07-29 14:55:18 -07:00
João Brázio	2b5faa61e2	Consolidates Buzzer and Speaker into a single object	2016-07-29 19:25:39 +01:00
João Brázio	8093c5f534	Non-blocking speaker now uses arduino's tone()	2016-07-29 18:45:50 +01:00
João Brázio	8896f08074	Fixes a compilation error introduced by #4448	2016-07-29 18:33:42 +01:00
Scott Lahteine	ea5ac94804	Improved MANUAL_[XYZ]_HOME_POS ... No need for `MANUAL_HOME_POSITIONS`. Just set each one as-needed to override the automatic behavior.	2016-07-28 19:51:48 -07:00
Scott Lahteine	b40661cb18	Fix output of heater states	2016-07-28 17:40:01 -07:00
Scott Lahteine	9083e5420a	Merge pull request #4419 from AnHardt/sd2pinmap ... Switch Sd2CardLib to fastio	2016-07-28 17:38:46 -07:00
Scott Lahteine	6f59560526	Merge pull request #4448 from jbrazio/speaker-followup ... A little cleanup at speaker.h	2016-07-28 17:37:36 -07:00
Scott Lahteine	c94b6dd3e7	Revert to SanityCheck on every .cpp file	2016-07-28 17:17:50 -07:00
Scott Lahteine	256b03598d	Merge pull request #4450 from thinkyhead/rc_fix_delta_optimization ... Fix DELTA speed calculation	2016-07-28 16:50:04 -07:00
Scott Lahteine	753283e020	inverse_second => inverse_mm_s	2016-07-28 16:35:18 -07:00
Scott Lahteine	83e1d90ca3	Undo errant optimization of block->millimeters	2016-07-28 16:26:52 -07:00
João Brázio	909e98b1af	A little cleanup at speaker.h	2016-07-29 00:03:25 +01:00
Scott Lahteine	ae1c7bca1b	Merge pull request #4445 from thinkyhead/rc_fix_rdfgsc_mega3 ... Fix for R.D.F.G.S.C. with MEGATRONICS 3 board	2016-07-28 15:55:30 -07:00
Scott Lahteine	03fdb26cd2	Wrangle encoder bits, LCD_CLICKED	2016-07-28 14:44:37 -07:00
Scott Lahteine	155def24c6	BLEN_A, B, C are defined in ultralcd headers	2016-07-28 14:38:50 -07:00
Scott Lahteine	42dcc3bf50	Remove "the click" comments	2016-07-28 14:38:50 -07:00
Scott Lahteine	0eba65f96b	Fix for R.D.F.G.S.C. with MINITRONICS board	2016-07-28 14:38:50 -07:00
fabtopia	83d0d59303	Fix for R.D.F.G.S.C. with MEGATRONICS 3 board ... The support for reprapworld LCD boke the code for the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER. See Full Grapics Display does not work any more after #4408 #4439	2016-07-28 13:12:19 -07:00
João Brázio	4f191a384b	Moves the font folder into the buildroot	2016-07-28 19:56:41 +01:00
Scott Lahteine	5367d56f87	Merge pull request #4434 from thinkyhead/rc_delta_safe_homing ... DELTA should ignore Z_SAFE_HOMING	2016-07-27 23:41:52 -07:00
Scott Lahteine	2525528fb2	DELTA should ignore Z_SAFE_HOMING	2016-07-27 23:25:56 -07:00
Scott Lahteine	ab4b2a66ff	Allow zero Z_RAISE_BETWEEN_PROBINGS	2016-07-27 05:00:58 -07:00
Scott Lahteine	8953e3e984	Allow Z_SAFE_HOMING without a probe	2016-07-27 04:33:56 -07:00
AnHardt	e4942d2163	Switch SD2cadrLib to fastio ... Replace all fastDigitalRead/Write() with READ/WRITE() Define SCK_PIN, MISO_PIN, MOSI_PIN in pins.h if not already defined in the pins_*.h files. Remove these conditional pin definitions from the pin-files. They are now always defined. Define separate sets of SPI-pins for AT90USB with and without Teensy support in fastio.h. Likely this was the main reason for all that confusion about the AT90USB-SPI pins.	2016-07-27 12:40:44 +02:00
Scott Lahteine	21e744c454	Allow zero raise for deploy/stow	2016-07-26 17:19:25 -07:00
Scott Lahteine	54084612fd	Merge pull request #4415 from petrzjunior/transl ... [LANGUAGE] Update Czech (Info screen strings)	2016-07-26 13:20:20 -07:00
Scott Lahteine	5597400cda	Merge pull request #4414 from thinkyhead/rc_split_conditionals ... Split up Conditionals.h into two files	2016-07-26 13:16:52 -07:00
Scott Lahteine	4be635ec6e	Remove MSG_PRINT_TIME from languages	2016-07-26 12:47:45 -07:00
Scott Lahteine	3be49881c0	Make SanityCheck.h a catch-all for obsolete configs	2016-07-26 12:41:40 -07:00
Scott Lahteine	fa647cca23	Do the sanity check just once per build	2016-07-26 12:37:14 -07:00
Scott Lahteine	24a1a16e5d	Move versioning to MarlinConfig.h	2016-07-26 12:37:14 -07:00
Scott Lahteine	7e70a0b05d	Move pins / Arduino includes to MarlinConfig.h	2016-07-26 12:37:14 -07:00
Scott Lahteine	d9f7ed9a3c	Move some macros from Marlin.h to macros.h	2016-07-26 12:37:13 -07:00
Scott Lahteine	277899c175	Move include _Bootscreen.h where needed	2016-07-26 12:37:13 -07:00
Scott Lahteine	83c4653c71	Include boards and macros ahead of configs	2016-07-26 12:19:50 -07:00
Scott Lahteine	5f4702ecb2	Make Conditionals.h a catch-all for old configs	2016-07-26 12:19:50 -07:00
Scott Lahteine	8a44928df3	Make Conditionals.h a catch-all for old configs	2016-07-26 12:19:50 -07:00
Petr Zahradník junior	3d9b878cf0	Czech update	2016-07-26 13:48:27 +02:00
Scott Lahteine	c6226bb0aa	Unify config in a single include without nested includes	2016-07-25 23:04:19 -07:00
Scott Lahteine	2d378fac1b	No need to include thermistortables.h in Configuration.h	2016-07-25 22:43:50 -07:00
Scott Lahteine	df27d01cd9	Arrange needed includes in Marlin.h	2016-07-25 20:53:36 -07:00
Scott Lahteine	93ea281061	Split up Conditionals.h into two files ... Rather than include twice, which is tricky but may confuse	2016-07-25 20:30:45 -07:00
Scott Lahteine	8684570f68	Merge pull request #4412 from thinkyhead/rc_followup_4402 ... Followup #4402 fixing 3-point leveling	2016-07-25 16:10:50 -07:00
Scott Lahteine	c55b7d0750	Merge pull request #4405 from thinkyhead/rc_theres_always_something ... Move HAS_DIGIPOTSS to Conditionals.h	2016-07-25 15:58:42 -07:00
Scott Lahteine	42eebcd518	Merge pull request #4409 from thinkyhead/rc_cleanup_comment ... Clean up Transfer Buffer Size comment	2016-07-25 15:58:34 -07:00
Scott Lahteine	5272147f7c	Followup #4402 fixing 3-point leveling	2016-07-25 15:56:34 -07:00
Scott Lahteine	fcc39e2b5f	Clean up Transfer Buffer Size comment	2016-07-25 12:54:55 -07:00
Scott Lahteine	0c0a63322b	Patches to prepare REPRAPWORLD_GRAPHICAL_LCD	2016-07-25 12:10:25 -07:00
brupje	a60a668f6b	Support for REPRAPWORLD_GRAPHICAL_LCD	2016-07-25 12:10:25 -07:00
Scott Lahteine	4f2ff46ab9	Move HAS_DIGIPOTSS to conditionals	2016-07-25 00:10:46 -07:00
Scott Lahteine	54f4f80077	Merge pull request #4404 from thinkyhead/rc_better_stepper_indirection ... Arrange stepper_indirection by axis	2016-07-24 19:26:39 -07:00
Scott Lahteine	169c21b477	Merge pull request #4402 from thinkyhead/rc_consistent_positioning ... Account for coordinate space offsets	2016-07-24 19:23:20 -07:00
Scott Lahteine	750a1e5116	Arrange stepper_indirection by axis	2016-07-24 19:00:51 -07:00
Scott Lahteine	7c27f34996	Merge pull request #4397 from thinkyhead/rc_tweak_eeprom ... Neaten up EEPROM read/write functions	2016-07-24 18:45:54 -07:00
Scott Lahteine	2595a40a61	Account for coordinate space more in G28 / G29 / M48	2016-07-24 18:34:05 -07:00
Scott Lahteine	060dc6d95a	Neaten up EEPROM read/write functions	2016-07-24 18:19:39 -07:00
Scott Lahteine	b7b7c90477	Merge pull request #4389 from thinkyhead/rc_optimize_planner ... Optimize planner with precalculation, etc.	2016-07-24 17:48:23 -07:00
Scott Lahteine	6900bb2286	Merge pull request #4395 from tnw513/italian_fix ... Update Italian translations. Remove trailing spaces.	2016-07-24 17:47:48 -07:00
Scott Lahteine	e4816293a8	serial_echopair_P for uint16_t	2016-07-24 17:46:37 -07:00
Scott Lahteine	d8e5af6834	Use RAW_POSITION for MBL in planner.set_position_mm	2016-07-24 17:20:36 -07:00
Scott Lahteine	b183442c61	Fix inactive_extruder_x_pos for coordinate space	2016-07-24 17:20:36 -07:00
Scott Lahteine	f75b0c2ee1	Make POSITION macros global	2016-07-24 17:20:36 -07:00
Scott Lahteine	101b60ef42	Tweak Dual X Carriage data spacing	2016-07-24 17:20:35 -07:00
Scott Lahteine	1fe60b723f	Merge pull request #4400 from thinkyhead/rc_sanity_check_temp_sensor ... Sanity check for too many temp sensors	2016-07-24 15:38:41 -07:00
Scott Lahteine	bedda3be61	Patch generic delta error caught by sanity check	2016-07-24 15:24:40 -07:00
Scott Lahteine	a5212bf277	Sanity check for too many temp sensors	2016-07-24 13:47:27 -07:00
Scott Lahteine	d8f2876753	Replace some float division with multiplication	2016-07-24 13:27:50 -07:00
Scott Lahteine	ddde785b37	Code formatting in planner.cpp	2016-07-24 13:27:50 -07:00
Scott Lahteine	f8b5749235	Replace division in planner with multiplication	2016-07-24 13:27:49 -07:00
Scott Lahteine	b921f6b69d	Optimize calculation of block->millimeters for DELTA	2016-07-24 13:27:49 -07:00
Scott Lahteine	db5df9500b	Move sync_plan_position closer to the top	2016-07-24 13:27:49 -07:00
Scott Lahteine	2839c56f5a	Merge pull request #4390 from jbrazio/duration_t ... Renamed timestamp_t to duration_t	2016-07-24 13:24:05 -07:00
Scott Lahteine	d6c50671d3	Sanitycheck: Z_SAFE_HOMING points are reachable	2016-07-24 10:54:47 -07:00
Scott Lahteine	a6203366b6	Sanitycheck: Z_SAFE_HOMING requires a probe	2016-07-24 10:54:25 -07:00
Scott Lahteine	bbe5b80492	Always define probe limits if there is a probe	2016-07-24 10:53:58 -07:00
Silvio Didonna	950397f2a0	Added missing translations. Removed trailing spaces for consistency (#4376)	2016-07-24 17:22:30 +02:00
João Brázio	50fb0f7cec	M31 serial output is now always in EN	2016-07-24 15:52:03 +01:00
João Brázio	62d96d72f3	Renamed timestamp_t to duration_t	2016-07-24 03:16:02 +01:00
Scott Lahteine	3e2b3353b0	Fix axis indices for COREYZ	2016-07-23 19:02:14 -07:00
Scott Lahteine	c287846f46	Merge pull request #4387 from thinkyhead/rc_anhardt_more_4370 ... Update Z in a unified way in run_z_probe	2016-07-23 16:47:10 -07:00
Scott Lahteine	22d0654fe6	Merge pull request #4382 from esenapaj/Update-Japanese-translation ... Update Japanese translation	2016-07-23 16:31:38 -07:00
Scott Lahteine	bb93b6822a	Use set_current_from_steppers_for_axis	2016-07-23 15:25:54 -07:00
AnHardt	96a162beda	Use implications from #4370 in run_z_probe() ... See also https://github.com/MarlinFirmware/Marlin/pull/4370#issuecomment-234713680	2016-07-23 13:09:28 -07:00
Scott Lahteine	4e67a85a5d	Macros to loop over axes	2016-07-23 13:09:28 -07:00
esenapaj	784be56e99	Follow-up the PR #4353 (General cleanup: enum) ... ・Update description of M111	2016-07-24 00:53:35 +09:00
esenapaj	3c11977558	Update Japanese translation ... ・Add translation ・Change translation ・Remove translation	2016-07-23 22:07:20 +09:00
Scott Lahteine	08459a003f	Undo the self-sabotage that is do_blocking_move_to_axis_pos	2016-07-23 00:59:11 -07:00
esenapaj	d32c4056ad	Fix for the PR #4379 (Additional logging of do_blocking_move_to) ... ・Remove unneeded PSTR()	2016-07-23 16:38:57 +09:00
Scott Lahteine	8099ee51a5	Merge pull request #4379 from thinkyhead/rc_blocking_move_logging ... Additional logging of do_blocking_move_to	2016-07-23 00:10:55 -07:00
Scott Lahteine	8633b644cf	Merge pull request #4378 from thinkyhead/rc_debug_leveling_docs ... Document DEBUG_LEVELING_FEATURE	2016-07-22 23:57:01 -07:00
Scott Lahteine	ad16d5019e	Additional logging of do_blocking_move_to	2016-07-22 23:53:08 -07:00
Scott Lahteine	bb9da6ebdd	Document DEBUG_LEVELING_FEATURE	2016-07-22 23:37:41 -07:00
Scott Lahteine	652fd8a826	Merge pull request #4362 from thinkyhead/rc_duplication_mode ... DUAL_NOZZLE_DUPLICATION_MODE	2016-07-22 21:17:59 -07:00
Scott Lahteine	1766b990b8	Merge pull request #4376 from jbrazio/timestamp_t-short ... Adds short format to timestamp_t	2016-07-22 21:17:17 -07:00
Scott Lahteine	6da3729531	Merge pull request #4370 from thinkyhead/rc_delta_fwd_kinematics ... Delta Forward Kinematics (and LOGICAL_POSITION)	2016-07-22 21:16:00 -07:00
João Brázio	9e5dbf67e8	Update the stats menu to include longest job and extruded filament	2016-07-23 03:05:45 +01:00
João Brázio	86d9311495	Rework LCD implementation to use timestamp_t	2016-07-23 03:05:36 +01:00
Scott Lahteine	b3eb0c8569	Add LOGICAL_POSITION macro, apply to kinematics	2016-07-22 18:38:13 -07:00
Scott Lahteine	35a610abf9	const arg to inverse_kinematics	2016-07-22 17:42:48 -07:00
João Brázio	b4aad85c9a	Rework stats menu to use timestamp_t	2016-07-23 01:42:21 +01:00
João Brázio	ecd48027fa	Adds short timestamp format to timestamp_t	2016-07-23 01:41:25 +01:00
Scott Lahteine	b6afa028f4	Don't call adjust_delta on SCARA	2016-07-22 16:36:34 -07:00
Scott Lahteine	d5e2d523c7	Generalize kinematics function names	2016-07-22 16:36:34 -07:00
Scott Lahteine	9c4ad7d7ef	Clean up delta declarations in Marlin_main.cpp	2016-07-22 16:36:33 -07:00
Scott Lahteine	4b1725628b	Move kinematic functions to "private" scope	2016-07-22 16:36:33 -07:00
Scott Lahteine	cde068ea42	Use set_current_from_steppers in quickstop_stepper	2016-07-22 16:36:33 -07:00
Scott Lahteine	9f30cc84ce	Use set_current_from_steppers for other kinematics	2016-07-22 16:36:33 -07:00
AnHardt	5db9b940ee	Use forwardKinematics in DELTA run_z_probe()	2016-07-22 16:36:33 -07:00
Scott Lahteine	b5a9647fec	Use ENABLED in stepper_indirection.h	2016-07-22 16:26:06 -07:00
Scott Lahteine	cbc7f22ad9	Implement DUAL_NOZZLE_DUPLICATION_MODE	2016-07-22 16:23:58 -07:00
Scott Lahteine	91777dd76c	Add DUAL_NOZZLE_DUPLICATION_MODE option	2016-07-22 16:22:56 -07:00
Scott Lahteine	260bbb3109	Fix a couple of simple typos	2016-07-22 16:22:56 -07:00
Scott Lahteine	179e091473	Merge pull request #4374 from thinkyhead/rc_jbrazio_timestamp_t ... Implements timestamp_t structure	2016-07-22 16:08:10 -07:00
AnHardt	499e404fbf	forwardKinematics for Delta printers	2016-07-22 16:01:51 -07:00
João Brázio	23043a1e05	Rework some code to use timestamp_t struct (saves 72 bytes)	2016-07-22 15:53:31 -07:00
João Brázio	9388dcfa49	Implements timestamp_t structure	2016-07-22 15:53:31 -07:00
Scott Lahteine	0b2c608d2f	Merge pull request #4372 from jbrazio/gcc-bark ... Fix minor gcc warning	2016-07-22 15:18:53 -07:00
Scott Lahteine	311c7dadb6	Cleanup do_blocking_move_to for DELTA	2016-07-22 14:18:45 -07:00
Scott Lahteine	b78590e63d	Patch and cleanup run_z_probe	2016-07-22 14:18:45 -07:00
João Brázio	2f7716987d	Fix minor gcc warning	2016-07-22 16:08:56 +01:00
João Brázio	efd3aabda8	Adds missing documentation to the point_t structure	2016-07-22 15:19:20 +01:00
Scott Lahteine	39caef4279	Merge pull request #4361 from AnHardt/imp-dbmt-for-delta ... DELTA do_blocking_move_to() more like the Chartesian one	2016-07-21 20:05:04 -07:00
Scott Lahteine	7d869ad98b	Merge pull request #4365 from thinkyhead/rc_shrink_planner_accel ... Adjustments to planner acceleration limit	2016-07-21 18:18:15 -07:00
AnHardt	376a57232e	DELTA do_blocking_move_to() more like the Chartesian one	2016-07-22 03:12:46 +02:00
Scott Lahteine	824c6859e2	Merge pull request #4369 from thinkyhead/rc_no_static_moves ... inline to fix warnings, smaller build size (sometimes)	2016-07-21 14:46:09 -07:00
Scott Lahteine	976c31235d	inline to fix warnings, smaller build size (sometimes)	2016-07-21 13:49:37 -07:00
AnHardt	6ef26a85d8	Back to the differences method in run_z_probe()	2016-07-21 18:16:38 +02:00
Scott Lahteine	4226f56f53	Revert the planner acceleration logic somewhat	2016-07-20 19:19:47 -07:00
Scott Lahteine	16e5348659	Merge pull request #4360 from thinkyhead/rc_toolchange_for_G28 ... Always switch to tool 0 for G28	2016-07-20 19:07:35 -07:00
Scott Lahteine	209f5c03d0	Fewer temporary vars in planner accel limit	2016-07-20 18:29:29 -07:00
Scott Lahteine	62ecd107ba	Patch ultralcd_impl header conditional names	2016-07-20 09:36:55 -07:00
Scott Lahteine	d2e9a9c188	Always switch to tool 0 for G28	2016-07-20 09:36:55 -07:00
Scott Lahteine	194d9521c3	Merge pull request #4356 from thinkyhead/rc_simpler_run_z_probe ... Unify run_z_probe	2016-07-19 19:02:39 -07:00
Scott Lahteine	4a6ed5e221	Use HOMING_FEEDRATE_Z for Z_PROBE_SPEED_FAST	2016-07-19 18:42:48 -07:00
AnHardt	09a3cc33e6	Unify run_z_probe ... Unify run_z_probe Add double touch for DELTAs. Introduce Z_PROBE_SPEED_FAST and Z_PROBE_SPEED_SLOW defaulting to homing_feedrate_mm_m[Z_AXIS] and homing_feedrate_mm_m[Z_AXIS]/2	2016-07-19 18:42:48 -07:00
Scott Lahteine	6137a1d934	Merge pull request #4359 from thinkyhead/rc_wrangle_movement_etc ... Use ENABLED(MAPPER_NON)	2016-07-19 18:22:55 -07:00
Scott Lahteine	0432613ad7	use enabled macro for mapper setting	2016-07-19 18:08:56 -07:00
Scott Lahteine	e44b37cdc2	motion section marker below homing speeds	2016-07-19 17:31:58 -07:00
Scott Lahteine	204fd6ec44	Set homing feedrates individually	2016-07-19 17:31:58 -07:00
Scott Lahteine	2bad02e60d	Reprapworld Keypad: F1 opens the Move Axis menu	2016-07-19 16:40:39 -07:00
Scott Lahteine	eaa6f568ee	Prevent re-entrant call of Reprapworld Keypad handler	2016-07-19 16:40:39 -07:00
Scott Lahteine	6abf916575	Reprapworld Keypad move step is 1mm	2016-07-19 16:40:39 -07:00
Scott Lahteine	06ac1f3bcf	Reduce Reprapworld Keypad move code size	2016-07-19 16:40:39 -07:00
Scott Lahteine	5d5affdfca	Merge pull request #4355 from thinkyhead/rc_rename_ultralcd_files ... Rename ultralcd implementation files for consistency	2016-07-19 16:14:27 -07:00
Scott Lahteine	bb225dedc6	Merge pull request #4354 from thinkyhead/rc_jbrazio_rework_g12 ... NOZZLE_CLEAN_FEATURE with no dependency on HAS_BED_PROBE	2016-07-19 15:26:59 -07:00
Scott Lahteine	8a2efd1155	Rename ultralcd implementation files for consistency	2016-07-19 15:26:14 -07:00
João Brázio	b869fbc05e	Update all config files with the new G12 options	2016-07-19 15:07:03 -07:00
João Brázio	47fef80848	Nozzle::clean() no longer requires HAS_BED_PROBE	2016-07-19 15:07:02 -07:00
Scott Lahteine	f1f1bac0e1	Merge pull request #4341 from esenapaj/Update-Japanese-translation ... Update Japanese translation	2016-07-19 15:04:22 -07:00
Scott Lahteine	6c899bb520	Merge pull request #4349 from jbrazio/gcc-bark-bark ... Removes some minor GCC warnings	2016-07-19 13:42:33 -07:00
Scott Lahteine	ef0a22871e	Merge pull request #4350 from jbrazio/followup-a875861 ... Adds utility.h	2016-07-19 13:40:52 -07:00
Scott Lahteine	9eba58a031	Merge pull request #4351 from jbrazio/u8glib-converter ... Updates u8glib's bmp2hex converter	2016-07-19 13:39:33 -07:00
Scott Lahteine	c502018eab	Merge pull request #4353 from jbrazio/global-enum-file ... General cleanup: enum	2016-07-19 13:37:56 -07:00
Scott Lahteine	0f9953b031	Merge pull request #4342 from AnHardt/rep-cons-g28 ... Introduce line_to_axis_pos() for use in homeaxis()	2016-07-19 12:56:58 -07:00
AnHardt	11c075c6b2	Introduce line_to_axis_pos(axis_codes axis, float where, float feed_rate = 0.0) ... and use it in `homeaxis()` instead of `do_blocking_move_to_axis_pos()`. `do_blocking_move_to_axis_pos` was wrong because it performed subdivided, delta-corrected moves for x- and y-axis. The first common move for delta homing is like quick_home but for 3 towers. Fix two warnings.	2016-07-19 17:24:44 +02:00
João Brázio	3ebad4e020	Moves all global enums to a central file	2016-07-19 14:31:09 +01:00
João Brázio	238fefcb00	Updates Stopwatch class to use internal state enum	2016-07-19 14:30:44 +01:00
João Brázio	30ac0782a9	Comment section style correction	2016-07-19 03:27:42 +01:00
João Brázio	8ecee431c4	Updates u8glib's bmp2hex converter	2016-07-19 03:16:30 +01:00
João Brázio	79e7721b76	Removes some minor GCC warnings	2016-07-19 03:03:11 +01:00
João Brázio	f4d63796b2	Adds utility.h	2016-07-19 02:55:23 +01:00
esenapaj	361307831e	Follow-up the PR #4335 (Debug char, fix compile errors for lcd pins) ... ・Solve a flickering when SD card is inserted or removed at using a ASCII LCD + language_kana.h	2016-07-18 20:09:24 +09:00
esenapaj	ff48bbb86a	Update Japanese translation ... ・Add new translation	2016-07-18 17:01:56 +09:00
Scott Lahteine	46117593b9	Merge pull request #4185 from esenapaj/Update-Japanese-translation ... Update Japanese translation (work in progress)	2016-07-17 18:36:34 -07:00
Scott Lahteine	3422103863	Merge pull request #4310 from thinkyhead/rc_mbl_position_shift ... Fix position shift with MBL	2016-07-17 18:31:25 -07:00
Scott Lahteine	92757bd7b3	Merge pull request #4339 from esenapaj/Follow-up-the-PR-#4163 ... Follow-up the PR #4163 (Mixing and Switching Extruders)	2016-07-17 18:15:23 -07:00
Scott Lahteine	493d30cd97	Drop intermediate nx, ny, and set destination directly	2016-07-17 17:59:52 -07:00
Scott Lahteine	07a735ad22	We always use destination so modify mesh_buffer_line	2016-07-17 17:57:33 -07:00
Scott Lahteine	04a5b7b257	A macro to normalize positions	2016-07-17 17:57:32 -07:00
esenapaj	5c8e87a866	Follow-up the PR #4163 (Mixing and Switching Extruders) ... ・Update forgotten K8400 files	2016-07-18 09:48:13 +09:00
Scott Lahteine	86eb5251c5	Fix some debug messages	2016-07-17 17:10:02 -07:00
Scott Lahteine	1e57a6af73	Use blocking_move, current_position in G28 homing	2016-07-17 16:56:13 -07:00
Scott Lahteine	f6a3a1da09	nz and ne are always set, so drop them down	2016-07-17 14:12:39 -07:00
Scott Lahteine	d0009e013b	Rename cell index vars	2016-07-17 14:12:39 -07:00
Scott Lahteine	697373b071	Reduce code size of mesh_buffer_line	2016-07-17 14:11:25 -07:00
Scott Lahteine	103d312f6d	MBL can actually do up to 9 x 9	2016-07-17 14:11:25 -07:00
Scott Lahteine	f4a69281fc	Only call mesh_buffer_line when MBL is active	2016-07-17 14:11:25 -07:00
Scott Lahteine	799a31cd30	Include the position_shift when splitting mesh lines	2016-07-17 14:08:20 -07:00
Scott Lahteine	f242aea032	Merge pull request #4319 from thinkyhead/rc_feedrates_to_mess_with_you ... Wrangle feed rate variables	2016-07-17 14:07:52 -07:00
Scott Lahteine	0342661b3f	Merge pull request #4335 from thinkyhead/rc_status_pad_jp ... Debug char, fix compile errors for lcd pins	2016-07-17 14:07:08 -07:00
Scott Lahteine	81e01152bb	Merge pull request #4336 from thinkyhead/rc_bltouch_sensor ... BLTouch probe sensor	2016-07-17 14:06:32 -07:00
Scott Lahteine	1583177ef4	BLTOUCH probe config option	2016-07-17 13:55:38 -07:00
Scott Lahteine	176b9627c7	Some cleanup ahead of BLTOUCH support	2016-07-17 13:55:38 -07:00
Scott Lahteine	39706f3e57	Endstop invert flags as macros instead of const bool	2016-07-17 13:51:02 -07:00
Scott Lahteine	7242d44810	Endstops vars already initialized	2016-07-17 13:38:48 -07:00
Scott Lahteine	5ed1e7a464	codenum => dwell_ms	2016-07-17 13:35:21 -07:00
Scott Lahteine	69d6016941	Revert default state of endstops in M502	2016-07-17 13:35:21 -07:00
Scott Lahteine	0fcd3706dd	Replace ENDSTOPS_ONLY_FOR_HOMING with ENDSTOPS_ALWAYS_ON_DEFAULT	2016-07-17 13:35:21 -07:00
Scott Lahteine	671634bf11	Fix spacing after section header	2016-07-17 13:35:21 -07:00
Scott Lahteine	f38553b482	fix a debug message	2016-07-17 13:29:42 -07:00
Scott Lahteine	3d78b8f929	Use HYPOT macro instead of hypot function	2016-07-17 13:29:42 -07:00
Scott Lahteine	9f9fe043ba	Apply sq macro throughout	2016-07-17 13:29:41 -07:00
Scott Lahteine	93ba5bddd7	Append units to feedrate variables	2016-07-17 13:29:41 -07:00
Scott Lahteine	5e3d3918b6	Patch compile error for RAMPS LCD pins	2016-07-17 12:27:37 -07:00
Scott Lahteine	94955a8bf7	pad string in lcd_finishstatus	2016-07-17 12:27:37 -07:00
Scott Lahteine	21ee0612e3	Debug char	2016-07-17 12:27:36 -07:00
Scott Lahteine	8f24e0a556	Debugging of MBL in G28	2016-07-17 11:08:30 -07:00
Scott Lahteine	05da02f0a2	Implement MIXING_EXTRUDER and SWITCHING_EXTRUDER	2016-07-17 10:53:10 -07:00
Scott Lahteine	22b4cff423	New extruder type configuration options	2016-07-17 00:13:56 -07:00
esenapaj	601015b73e	Update Japanese translation	2016-07-17 16:04:12 +09:00
Scott Lahteine	9766e24504	Merge pull request #4277 from thinkyhead/rc_mks_13_viki2 ... Support for VIKI2 with MKS 1.3 / 1.4	2016-07-16 23:49:33 -07:00
Scott Lahteine	02285662f5	Merge pull request #4298 from jbrazio/feature/filament-counter ... Adds filamentUsed and longestPrint stats to PrintCounter	2016-07-16 23:48:46 -07:00
Scott Lahteine	bf16ae5a70	Merge pull request #4299 from jbrazio/feature/g27-park-nozzle ... Implements park nozzle feature	2016-07-16 23:47:12 -07:00
Scott Lahteine	aaa0d298b9	Merge pull request #4326 from thinkyhead/rc_no_static_items_fix ... Suppress compiler warnings in ultralcd.cpp	2016-07-16 23:38:08 -07:00
Scott Lahteine	cc3ef73583	Merge pull request #4327 from thinkyhead/rc_petrzjr_long_print ... LCD Longer print	2016-07-16 23:37:34 -07:00
Scott Lahteine	77c8fb627f	Merge pull request #4329 from thinkyhead/rc_italian_fix ... Added missing Italian translations	2016-07-16 23:37:15 -07:00
Scott Lahteine	b14888501b	Merge pull request #4301 from Ingramz/RCBugFix ... Add Cartesio CN Controls V11	2016-07-16 22:35:07 -07:00
Silvio Didonna	32e0d71729	Added missing translations	2016-07-16 22:26:46 -07:00
Scott Lahteine	0f3232065e	Merge pull request #4305 from jbrazio/feature/splash-improvement ... Custom boot screen feature improvement	2016-07-16 21:59:39 -07:00
Petr Zahradník junior	2d7fe9dc78	LCD Longer print	2016-07-16 18:21:06 -07:00
Scott Lahteine	eee903bd4b	Format some DAC lines	2016-07-16 17:59:13 -07:00
Scott Lahteine	d53dcaa796	Suppress some compiler warnings	2016-07-16 17:59:01 -07:00
João Brázio	fa4274cf4c	Improves the custom bootscreen logo feature	2016-07-17 01:31:44 +01:00
João Brázio	1f3283e3a5	Adds custom boot logos for bq Hephestos 2 and Cartesio	2016-07-17 01:31:36 +01:00
João Brázio	dfa1c45075	Adds a notice to vendors about the SHOW_CUSTOM_BOOTSCREEN directive	2016-07-17 01:15:17 +01:00
Scott Lahteine	ed468e848f	Merge pull request #4321 from esenapaj/Follow-up-the-PR-#4287 ... Follow-up and fix the PR #4287 (Allow stopwatch and printcounter to go over 18:12:15)	2016-07-16 17:14:21 -07:00
João Brázio	a8758619ec	The safe_delay() is now globaly accessible	2016-07-16 12:28:06 +01:00
João Brázio	9a00108cb6	Adds the WEBSITE_URL as the boot screen line 2	2016-07-16 12:24:37 +01:00
João Brázio	f5234b0695	Adds a customizable screen timeout for the default boot screen	2016-07-16 12:24:36 +01:00
João Brázio	2f26bc2153	Adds filamentUsed and longestPrint stats to PrintCounter	2016-07-16 12:12:27 +01:00
João Brázio	336481ea81	Added G27 configuration options to all configs	2016-07-16 12:07:59 +01:00
João Brázio	c711701626	Implements a nozzle parking command (G27)	2016-07-16 12:07:59 +01:00
João Brázio	5f368d1bc3	Followup for #4320	2016-07-16 11:57:35 +01:00
João Brázio	d7c51bc4b9	Merge pull request #4320 from jbrazio/followup/4307 ... Moves do_blocking_move_to_xy() out of the HAS_BED_PROBE define	2016-07-16 11:48:00 +01:00
esenapaj	af9b1d79b1	Follow-up and fix the PR #4287 (Allow stopwatch and printcounter to go over 18:12:15) ... ・Remove MSG_END_HOUR and MSG_END_MINUTE from all the language files ・Change from MSG_INFO_TOTAL_PRINTS to MSG_INFO_PRINT_COUNT in German file	2016-07-16 18:39:22 +09:00
Scott Lahteine	e563634a25	Merge pull request #4314 from AnHardt/use-d_b_m_t-in-g28 ... Use do_blicking_move_to*() in G28	2016-07-15 20:22:02 -07:00
Scott Lahteine	59ae1811c2	Merge pull request #4303 from AnHardt/delta-g28 ... DELTA: Move out of the clip-zone after G28	2016-07-15 20:20:22 -07:00
João Brázio	fdea8b6e6a	Moves do_blocking_move_to_xy() out of the HAS_BED_PROBE define	2016-07-16 03:59:49 +01:00
AnHardt	d2a49c016d	DELTA: Move out of the clip-zone after G28 ... Move down to a safe height after G28 for DELTAs.	2016-07-15 15:22:44 +02:00
AnHardt	46994fd17d	Use do_blicking_move_to*() in G28	2016-07-15 15:02:15 +02:00
João Brázio	ffbb31b235	Fixes an PSTR overflow with print_xyz()	2016-07-15 11:25:34 +01:00
Indrek Ardel	ecb23c1b65	Add Cartesio CN Controls V11 board	2016-07-15 12:55:47 +03:00
Indrek Ardel	c8f2dd7cd5	Fix CN Controls 12 styling	2016-07-15 09:54:09 +03:00
Scott Lahteine	cec7110409	Merge pull request #4308 from thinkyhead/rc_debug_gcode_t ... Added logging related to gcode_T	2016-07-14 19:46:33 -07:00
Scott Lahteine	6446d3939a	Merge pull request #4309 from thinkyhead/rc_static_item_fix_77 ... Fix skipping of static items	2016-07-14 19:28:49 -07:00
Scott Lahteine	95ab2fd3ae	Fix skipping of static items	2016-07-14 19:16:16 -07:00
Scott Lahteine	166f19251e	Add more debugging for leveling ... - Especially in `gcode_T` - In `update_software_endstops` - Some tweaks to observe	2016-07-14 19:04:13 -07:00
Scott Lahteine	7ac0b91a45	Collapsible long comment in gcode_T	2016-07-14 18:28:41 -07:00
João Brázio	e71a631f8f	do_blocking_move_*() no longer depend on HAS_BED_PROBE	2016-07-15 01:54:14 +01:00
Scott Lahteine	8bf6861af8	Merge pull request #4054 from jbrazio/feature/g12-clean-tool ... Implements clean nozzle feature (Lulzbot's REWIPE)	2016-07-14 14:38:38 -07:00
Scott Lahteine	c5e51f6b96	finished => completed	2016-07-14 11:46:35 -07:00
Scott Lahteine	1618870c84	card.printingHasFinished does print_job_timer.stop	2016-07-14 11:39:58 -07:00