Bob-the-Kuhn
60471b7592
minor improvements
...
Configuration_store.cpp - changed a couple of print statements so the
values were printed. The old method resulted in the formula being
printed.
ubl_G29
1) added support for R option to P4. Now probes all points unless R is
present and the number is greater than 0.
2) P2 - moved map print statement so it showed the point that was
currently being probed, The old location did this only for the first
point.
3) P4 - Moved the map print for the same reason.
ultralcd.cpp - changed "Mesh Editor :" to "Mesh Editor" because the LCD
draw routine puts a ":" in automatically so you end up with an extra ":"
using the old message.
2017-04-15 09:31:55 -05:00
Scott Lahteine
25a61e9061
Improve motion-based endstop triggering code
2017-04-15 06:16:50 -05:00
Scott Lahteine
a2356c2825
Fix compiler warning about z-offset callback
2017-04-15 02:50:27 -05:00
Scott Lahteine
037c964d26
Reverse bools on prepare_move sub-functions
2017-04-15 01:08:19 -05:00
Scott Lahteine
d9c4333806
Extra logging of Dual X modes
2017-04-15 01:08:19 -05:00
Scott Lahteine
4067d15c92
Cleanup, extend TMC2130 implementation
2017-04-14 23:00:00 -05:00
Scott Lahteine
d60c02c5b1
Cleanup, extend TMC2130 configuration
2017-04-14 22:43:56 -05:00
Scott Lahteine
0e97b3d6d0
Fix some configuration spacing
2017-04-14 22:36:10 -05:00
Scott Lahteine
cf6f483378
Merge pull request #6187 from thinkyhead/rc_flsun_delta_autocal
...
Delta: DELTA_HEIGHT, G33 Auto-Calibrate, drop M206/M428, add M665 H
2017-04-14 22:32:12 -05:00
Scott Lahteine
24882adfbf
Allow NO_WORKSPACE_OFFSETS with DELTA_AUTO_CALIBRATION
...
- On `DELTA` the `M665 H` option supplants `M206`
- On `DELTA` `NO_WORKSPACE_OFFSETS` only reverts `G92` behavior
- Spawn 4 conditionals based on `NO_WORKSPACE_OFFSETS`
- Optimize coordinate space conversion for `DELTA` workspace
- To keep EEPROM version, retain `home_offset[XYZ]`, just ignore XY
2017-04-14 21:56:49 -05:00
Bob-the-Kuhn
1acb84ba02
fix 1 bug, add error messages
...
===============================================
make changes requested by reviewers
===============================================
add M43 test to Travis, fix EOL, remove trailing spaces
2017-04-14 20:57:45 -05:00
LVD-AC
8821963873
Implement delta auto-calibration and delta_height
2017-04-14 19:46:31 -05:00
Scott Lahteine
b305699046
Merge pull request #6341 from benlye/benlye-lcd_babystep_zoffset
...
Fix lcd_babystep_zoffset()
2017-04-14 19:11:46 -05:00
LVD-AC
03bda24d19
Add delta auto-calibration and configuration for Flsun AC
2017-04-14 19:08:14 -05:00
Scott Lahteine
1bd25fd2b3
Clean up config spacing, section headings, etc.
2017-04-14 19:06:31 -05:00
Scott Lahteine
153b0ae967
Tweak Delta Printer configuration note
2017-04-14 19:06:06 -05:00
Scott Lahteine
81ffd98dd9
Allow faux leveling
2017-04-14 19:06:06 -05:00
Scott Lahteine
2355d87e11
Merge pull request #6346 from thinkyhead/rc_broken_abl_test
...
Add support for SOLENOID_PROBE
2017-04-14 18:36:32 -05:00
Scott Lahteine
f4685c28b7
Reorder Conditionals_post.h and add comments
2017-04-14 18:18:21 -05:00
Scott Lahteine
0ac2b5c045
Additional 5 extruders support (solenoids, microstepping)
2017-04-14 18:18:20 -05:00
Scott Lahteine
fd2a0784ba
Add support for SOLENOID_PROBE
2017-04-14 17:24:36 -05:00
Scott Lahteine
5803ba43a9
Expose EXT_SOLENOID as an advanced option
2017-04-14 17:24:36 -05:00
Scott Lahteine
ea734f910b
Use direct pin manipulation whenever possible
2017-04-14 16:55:35 -05:00
Scott Lahteine
19d0c6a0c0
Patch to init W with RGBW_LED
2017-04-14 16:55:23 -05:00
Scott Lahteine
3e079660b0
Never define SLED_PIN
2017-04-14 16:36:32 -05:00
benlye
1a447d0047
Fix variant conditional for 1284p
2017-04-14 18:46:09 +01:00
benlye
1f9ee42750
Fix lcd_babystep_zoffset()
...
Resolve 'steps_to_mm was not declared in this scope' compilation error after recent changes to merge babystepping with M851
2017-04-14 18:38:35 +01:00
Bob-the-Kuhn
445d39e95a
CORExx endstop detection fixes
...
1. The CORExx printers were checking more endstop axis than needed.
2. Removed all the CORE_xx_NOT logic. The motor_direction(xx) routine
always returns the correct data so it is not needed. It was actually
cause the wrong direction to be checked in some cases.
3. Made the logic/defines for X, Y & Z axis all the same. The old logic
checked inappropriate configurations for Y and didn't check all the
correct configurations on Z.
4. Added a check for zero steps before the X, Y & Z axis. Previously
would check the they axis even if there were no movement.
2017-04-13 21:43:37 -05:00
Roxy-3D
28fec61f92
M100 Fixes and Features
...
All the memory accesses need to be unsigned char in order to avoid
false errors being detected. Two new features are available for
developers to call into the M100 functionality to look for data
corruption.
2017-04-13 18:20:53 -05:00
Scott Lahteine
52c3ace102
Add BABYSTEP_ZPROBE_OFFSET as an optional feature
2017-04-13 16:29:43 -05:00
Scott Lahteine
cd4e6abec8
Group BABYSTEPPING options together
2017-04-13 16:26:45 -05:00
Scott Lahteine
60ac41a32c
Add code to handle changes to zprobe_zoffset
2017-04-13 15:46:35 -05:00
Scott Lahteine
8fa4209916
Movement/adjustment should be reverse of probe offset change
2017-04-13 15:46:05 -05:00
Thomas Moore
361655828f
Use babystepping to adjust bed probe z-offset
2017-04-13 15:46:05 -05:00
Scott Lahteine
36e5c7c389
Merge pull request #6330 from thinkyhead/rc_improvements
...
Sanity check per-axis options' array sizes
2017-04-13 13:08:44 -05:00
Scott Lahteine
02fca543bb
Merge pull request #6272 from thinkyhead/rc_adc_variable_rate
...
Make ADC sensor reading frequency adjustable
2017-04-13 12:49:31 -05:00
Scott Lahteine
34308368c0
Sanity check per-axis settings for size
2017-04-13 11:35:20 -05:00
Scott Lahteine
ac96ae89f9
Apply const in Stepper::isr
2017-04-13 06:20:36 -05:00
Scott Lahteine
2fa1e882d0
Merge pull request #6325 from thinkyhead/rc_M20_with_size
...
Simplified M20 with size
2017-04-13 05:06:52 -05:00
Bob-the-Kuhn
1b12fea0fa
simplified M20 with size
2017-04-13 04:56:58 -05:00
Scott Lahteine
4022b971db
Merge pull request #6315 from thinkyhead/rc_unify_M421
...
Unify M421
2017-04-12 19:43:28 -05:00
Scott Lahteine
b236562354
Merge pull request #6306 from thinkyhead/cleanup_after_6302
...
Adjustments to M100
2017-04-12 19:12:27 -05:00
Scott Lahteine
5e4f4d387f
Swap MBL z_values dimensions to [X][Y]
2017-04-12 17:24:05 -05:00
Scott Lahteine
063f641651
Unify M421
2017-04-11 15:46:13 -05:00
Scott Lahteine
6d5400dc31
Merge pull request #6240 from thinkyhead/rebuild_rgb_led
...
Extend RGB LED with Printer Events
2017-04-11 15:16:57 -05:00
Scott Lahteine
dac21ec680
Add support for an RGBW LED
2017-04-11 12:58:55 -05:00
Scott Lahteine
e7746ffee4
Extend RGB LED support, adding Printer Events
2017-04-11 12:15:41 -05:00
Scott Lahteine
c7063eb55c
theTarget => target_temp
2017-04-11 12:15:41 -05:00
Scott Lahteine
36bda2bade
Add HAS_RESUME_CONTINUE shorthand macro
2017-04-11 12:15:40 -05:00
Scott Lahteine
53e6c33c37
2 is DXC_DUPLICATION_MODE
2017-04-11 12:15:40 -05:00
Scott Lahteine
a2cb0a3d54
Use multiply for delta probe constraint
2017-04-11 12:15:40 -05:00
Scott Lahteine
6487c96a4a
Merge pull request #6313 from Kaibob2/patch-10
...
Allow 10mm Movements for Z-Axis
2017-04-11 12:04:10 -05:00
Kai
001bc14255
Allow 10mm Movements for Z-Axis
...
I use the movement options via LCD quite often. Especially to get the nozzle out of the way. I see no reason, why the 10mm option is disabled for the Z-Axis, this is why i always delete this line when i compile a new version.
If this is unwanted, please just close this PR
2017-04-11 18:39:26 +02:00
Scott Lahteine
6a9b008044
Fix MINIMUM_STEPPER_PULSE maths
2017-04-11 11:11:17 -05:00
Scott Lahteine
68773f4486
Simplify stepper macros by renaming enable/disable macros
2017-04-11 11:10:26 -05:00
Scott Lahteine
e02a5a6371
Add macros for delays by machine cycle
2017-04-11 09:18:32 -05:00
Scott Lahteine
ecc537015a
Have M109 / M190 do nothing with no parameters
2017-04-11 05:06:25 -05:00
Scott Lahteine
03aa9a390e
Apply coding standards to M100, break up into functions
2017-04-10 21:09:43 -05:00
Scott Lahteine
48c16fc6ef
Merge pull request #6307 from thinkyhead/rc_less_no_reentrance
...
Only lcd_synchronize needs no_reentry
2017-04-10 20:58:32 -05:00
Scott Lahteine
4fcfe926d6
Only lcd_synchronize needs no_reentry
2017-04-10 20:13:23 -05:00
Scott Lahteine
67fb7f82ac
Merge pull request #6283 from thinkyhead/rc_eeprom_z_fade
...
Save / restore z_fade_height in EEPROM
2017-04-10 20:05:20 -05:00
Scott Lahteine
eff5af569b
Merge pull request #6300 from MagoKimbra/rc_fix_mesh_report
...
Fix mbl_mesh_report
2017-04-10 19:37:19 -05:00
Scott Lahteine
4a18968c10
Merge pull request #6297 from Kaibob2/patch-9
...
Fix EPROM -> EEPROM
2017-04-10 19:35:30 -05:00
Roxy-3D
ba85faabc0
Fix M100 Free Memory Checker
...
M100 had numerious changes and quit working. Part of the problem is
the overloading of the SERIAL_PROTOCOL functions. Also, some of the
address arithmatic was changed to use char *ptr and passing ptr into the
SERIAL_PROTOCOL functions caused them to try to print a string instead
of a number. M100 is working again. Let's keep it that way!
M100 has been expanded to now have a function int
free_memory_is_corrupted() that can be called from other code to see if
the free space is still contiguous. It may make sense to add a flag to
control its verbose nature but right now, the extra chit chat is very
helpful to know int free_memory_is_corrupted() is doing the right thing
and what it found at various points when it was called. A 'Show &
Tell' is coming up with int free_memory_is_corrupted().
2017-04-10 15:33:55 -05:00
Kai
3b82db5fe9
Missing semicolon in ultralcd.cpp
...
When PARK_HEAD_ON_PAUSE is defined Marlin won't compile because of two missing semicolon.
2017-04-10 14:45:51 -05:00
MagoKimbra
7d2e637867
Fix mbl_mesh_report
2017-04-10 20:50:19 +02:00
Kai
afeb0452ef
Fix EPROM -> EEPROM
...
These fixes are neede because before it showed the englisch text even if language = de was selected
2017-04-10 18:37:00 +02:00
Scott Lahteine
7f950a80c0
Make ADC sensor reading frequency adjustable
2017-04-09 22:18:21 -05:00
Scott Lahteine
786af73e24
Convert config code to a static class
2017-04-09 22:06:41 -05:00
james94jeans2
5b9476fe78
Added z_fade_height to EEPROM-Settings
...
Firmware was forgetting the z_fade_height in Planner, set by M420 Z<f>,
after each reset or loading settings from EEPROM. Added the float
z_fade_height to EEPROM-Storage, now remembers the value.
2017-04-09 21:16:58 -05:00
Scott Lahteine
9343f6a95f
Put TOSHIBA with other stepper driver options
2017-04-09 20:52:49 -05:00
Scott Lahteine
7a704af5e6
Merge pull request #6284 from thinkyhead/rc_wt150_rebase
...
wt150 (Mightyboard Rev E) & RRD Full Graphic Smart Controller
2017-04-09 20:27:44 -05:00
Max Matveev
2031fb913b
Fixed comparison of float values to NaN
2017-04-09 20:28:46 +02:00
Scott Lahteine
e48a52a530
Patch a display issue with LCD_DECIMAL_SMALL_XY
...
The `ftostr4sign` function got munged by the `WITHIN` patch
2017-04-09 10:25:35 -05:00
Scott Lahteine
1a3cd6a090
Merge pull request #6213 from thinkyhead/rc_gitattributes
...
Init bed_level_virt_interpolate on EEPROM load
2017-04-09 08:13:11 -05:00
Scott Lahteine
314a02e2d5
Toggle with XOR
2017-04-09 07:58:47 -05:00
Scott Lahteine
8bc0d90b00
Init bed_level_virt_interpolate on EEPROM load
2017-04-09 07:04:20 -05:00
MD
20dd5376b8
Cheaptronic V2
...
Add support for new electronics
www.reprapobchod.cz
2017-04-09 06:57:43 -05:00
Scott Lahteine
4cdda5615b
Bring other configs up to date with wt150 changes
2017-04-09 06:45:42 -05:00
Paweł Stawicki
9b0885f4f6
Allow boards without a thermistor
2017-04-09 06:45:41 -05:00
Paweł Stawicki
64cfcebe66
Update SlowSoftI2CMaster link. MightyBoard digipots I2C bus has no resistors.
2017-04-09 06:45:03 -05:00
Paweł Stawicki
0eb16d9ff7
Add example config for the wt150 printer with RepRapDiscount Full Graphic Smart Controller
2017-04-09 06:44:54 -05:00
Paweł Stawicki
652bedfa18
Add RepRapDiscount Full Graphic Smart Controller support to MIGHTYBOARD REVE
2017-04-09 06:44:53 -05:00
Paweł Stawicki
44cdebb8f1
Add software spi support for max6675
2017-04-09 06:44:53 -05:00
Paweł Stawicki
191fec009f
Add digipot i2c control for MCP4018
2017-04-09 06:44:53 -05:00
Scott Lahteine
e5b16081cb
Update TinyBoy2 configurations
2017-04-09 06:44:53 -05:00
Scott Lahteine
1855534f20
Config files cleanup
2017-04-09 06:44:52 -05:00
Scott Lahteine
c26a315d0b
Additional missed patches
2017-04-09 04:24:23 -05:00
Scott Lahteine
39617e10b8
Patch configs comment formatting
2017-04-09 03:49:16 -05:00
Scott Lahteine
c54f6cf23d
Updates to support 5 extruders
2017-04-09 03:49:16 -05:00
Scott Lahteine
2b88ccd0aa
Apply UBL mesh bounds to remaining configs
2017-04-09 03:49:15 -05:00
Scott Lahteine
60be3d264b
Macros to print floats, hiding imprecision
2017-04-09 03:48:40 -05:00
Scott Lahteine
b356d73239
Merge pull request #6278 from thinkyhead/pr_delta_angles
...
Followup to additional delta trim options
2017-04-08 22:25:57 -05:00
Jimmy Envall
f78d44e91a
Added support for delta tower angle corrections.
2017-04-08 21:13:44 -05:00
Scott Lahteine
d3b4d84586
Merge pull request #6277 from thinkyhead/pr_roxy3d_rcbugfix
...
Unify UBL Command Parsing
2017-04-08 20:17:46 -05:00
Scott Lahteine
d4ce839351
Cleanup following Pins Debug update
2017-04-08 18:59:57 -05:00
Scott Lahteine
c7a8f7970b
Formatting / cleanup
2017-04-08 18:59:57 -05:00
Scott Lahteine
29d4ec8257
Support 5 extruder auto fans
2017-04-08 18:59:57 -05:00
Scott Lahteine
824f3c1c0d
Fix up configuration comments
2017-04-08 18:59:56 -05:00
Scott Lahteine
995ed90248
Clean up Filament Width Sensor comments
2017-04-08 18:59:56 -05:00
Scott Lahteine
5a7b810fdd
General comment cleanup
2017-04-08 18:58:33 -05:00
Scott Lahteine
0027c22839
Drop extraneous calls to lcd_update
2017-04-08 18:58:33 -05:00
Scott Lahteine
d6db7a9b03
patch "step_remaining"
2017-04-08 18:13:20 -05:00
Scott Lahteine
cbc2331187
Use LCD_MESSAGEPGM over lcd_setstatuspgm
2017-04-08 18:04:39 -05:00
Scott Lahteine
3729510b1e
Set and check main parameter values, report all errors
2017-04-08 17:15:55 -05:00
Roxy-3D
34d3ed9ab1
These items were removed from the UBL Command Parsing
...
Having these items randomly (and errorniously) disappear cost me several
hours of work yesterday.
2017-04-08 15:30:20 -05:00
Scott Lahteine
15edb41cee
Patches to UBL
2017-04-08 14:59:14 -05:00
Roxy-3D
14cf527bb8
Getting setup for debugging
2017-04-08 14:59:14 -05:00
Scott Lahteine
f8408036f2
Merge pull request #6264 from thinkyhead/rc_five_extruders
...
Support up to 5 extruders in Marlin
2017-04-07 12:48:56 -05:00
Bob-the-Kuhn
f7fc49c3a3
Finish name change
...
DAC_STEPPER_DFLT wasn't changed to DAC_MOTOR_CURRENT_DEFAULT in all
places on PR #6124
2017-04-07 11:05:24 -05:00
Scott Lahteine
832064e4f2
Implementation changes to support 5 extruders
2017-04-07 10:46:37 -05:00
Scott Lahteine
04050237f0
Header and pins changes to support 5 extruders
2017-04-07 10:46:36 -05:00
Scott Lahteine
2a84122edd
Configuration changes to support 5 extruders
2017-04-07 10:46:35 -05:00
Scott Lahteine
edf18977c1
Patch pins files hotends/e-steppers sanity check
2017-04-07 10:46:33 -05:00
Scott Lahteine
dc84678fc1
Fix HOTEND_STATUS_ITEM for graphical display
2017-04-06 23:07:30 -05:00
Scott Lahteine
a0de5d94e2
Merge pull request #6258 from benlye/benlye-bilinearfix2
...
Better fix for bilinear Z offset and G29 Z (update to #6251 )
2017-04-06 20:51:57 -05:00
Scott Lahteine
b23aef5b8d
Merge pull request #6190 from Bob-the-Kuhn/Stop-and-Kill-prints---round-2
...
Message for every KILL and STOP (also need delays)
2017-04-06 20:40:12 -05:00
Roxy-3D
945303c0d5
eleminate bootscreen.h
2017-04-06 19:55:41 -05:00
Roxy-3D
ef3da3971e
Update ubl.h
2017-04-06 19:55:41 -05:00
Roxy-3D
8644dc170b
get synchronized to current file names
2017-04-06 19:55:41 -05:00
Roxy-3D
1451b7eacf
UBL's Grid Based Leveling code
...
Pretty much... The code is in place. Still more work to do. But it
has a lot of hooks and variables in other code, so commit and merge
before I pick up a million 'Conflicts'.
2017-04-06 19:55:41 -05:00
Bob-the-Kuhn
549055f20c
Merge pull request #6124 from Bob-the-Kuhn/MCP4728-consistency
...
MCP4728 consistency & fix ultralcd.cpp (PRINTRBOARD Rev F and RIGIDBOARD V2)
2017-04-06 16:35:50 -05:00
Bob-the-Kuhn
a77875c9d2
Merge pull request #6114 from Bob-the-Kuhn/try2-add-BLTouch-retry
...
Another BLTouch retry place (replaces PR #6108 )
2017-04-06 16:25:55 -05:00
Bob-the-Kuhn
3b9ff2cb12
Merge pull request #5676 from Bob-the-Kuhn/configuration.h
...
Configuration.h - reword Z PROBE section
2017-04-06 16:18:34 -05:00
Bob-the-Kuhn
6643d553f6
# This is a combination of 2 commits.
...
# This is the 1st commit message:
MCP4728 consistency & fix ultralcd.cpp
The MCP4728 DAC controls the stepper motor current strenth on the
PRINTRBOARD Rev F and RIGIDBOARD V2 boards.
PR #5792 on 9 FEB 2017 implemented default drive percentages but only on
the RIGIDBOARD V2.
This change moves the default settings to Configuration_adv.h.
Also, ultralcd.cpp won't compile because of a type def conflict.
Changed it to match the one in stepper_dac.cpp
===========================================================
reword stepper curent section for clarity
===========================================================
change name & improve comments
===========================================================
changed name from A4JP to SCOOVO_X9H per PR #6139
# This is the commit message #2 :
fix typo
2017-04-06 16:16:27 -05:00
Bob-the-Kuhn
a44b3432c1
add BLTouch retry to a second place & add/update delays
...
=================================================
implement requested changes
=================================================
remove delays (they're in another PR) & move return
2017-04-06 16:13:07 -05:00
Bob-the-Kuhn
a5abc61fb9
Merge pull request #6219 from Bob-the-Kuhn/Servo-probe-and-toggle-pins
...
M43 - add Toggle utility and Z servo utility (replaces PR #5864 )
2017-04-06 16:10:50 -05:00
Bob-the-Kuhn
3b8926bd09
improved wording, consolidation of info, BLTouch warning
...
==============================================
clarified BLTouch calculation & changed comment delimitters/flags
I found it hard to pickout the various sections in this area so I
changed most comments from // style to /** ... */
Made the BLTouch calculation simpler and clarified the units of measure
for the result.
============================================
add changes to example configurations
============================================
add TinyBoy2 to this PR & add BLTouch Delay
2017-04-06 16:06:01 -05:00
Scott Lahteine
55d296aaf0
pinsDebug with more features, uses less RAM
...
I've just uploaded a major change to pinsDebug.
The big change was creating an array in FLASH that contained every
active pin definition. That reduced the RAM memory usage considerably
but increased the FLASH usage.
Creating the array requires going through the pin list twice. Rather
than having two copies of it in the code I moved the list out to another
file (pinsDebug_list.h) and then just did two #includes.
From the user’s view they’ll see the following changes:
1. Now reports all the names assigned to a pin
2. The port is now reported in addition to the pin number.
3. When PWM0A & PWM1C share a pin, both PWMs are reported
4. More PWM/Timer info is reported
One new item that may cause some concern is the usage of the LINE
predefined preprocessor macro. It may not be available if the Arduino
IDE goes to a different compiler.
Includes support for 1284 & 1286 families.
Memory usage changes when enabling PINS_DEBUGGING:
ATmega2560
FLASH
. without 52576
. with new 64592
. with old 62826
. new-out 12016
. old-out 10250
. new-old 1766
.
RAM
. without 2807
. with new 2875
. with old 3545
. new-out 68
. old-out 738
. new-old -670
==================================================================
minor changes - mostly formatting
1) added newline to end of teensyduino file
2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings
about redefining TEENSYDUINO
3) removed some trailing spaces
reduce PROGMEM size & update pin list
Reduced PROGMEM usage by
1) converting often used macro to a function
2) moved as much as possible into the function
This required creating two arrays of address pointers for the PWM
registers.
==================================================================
update with new M3, M4, M5 pin names
==================================================================
report I/O status for unused/unknown pins
2017-04-06 16:06:01 -05:00
Scott Lahteine
e116723b8b
Adjust indentation in ubl.h
2017-04-06 16:06:00 -05:00
Scott Lahteine
1b3a26f2f5
Rename all UBL files with a ubl_ prefix
2017-04-06 16:06:00 -05:00
Scott Lahteine
d13991ae18
Use same config name for all mesh dimensions
2017-04-06 16:05:59 -05:00
Bob-the-Kuhn
f9686a108c
add Z servo test and toggle pins to M43
2017-04-06 15:59:38 -05:00
Scott Lahteine
62cbaa302e
Z_DUAL_ENDSTOP - make offset a configuration item
...
The offset for Z_DUAL_ENDSTOP (z_endstop_adj) is already in Marlin.
This PR just makes it a configuration item.
z_endstop_adj is initialized in two places so both had to be modified.
2017-04-06 15:57:10 -05:00
Scott Lahteine
c9e35004e7
pinsDebug with more features, uses less RAM
...
I've just uploaded a major change to pinsDebug.
The big change was creating an array in FLASH that contained every
active pin definition. That reduced the RAM memory usage considerably
but increased the FLASH usage.
Creating the array requires going through the pin list twice. Rather
than having two copies of it in the code I moved the list out to another
file (pinsDebug_list.h) and then just did two #includes.
From the user’s view they’ll see the following changes:
1. Now reports all the names assigned to a pin
2. The port is now reported in addition to the pin number.
3. When PWM0A & PWM1C share a pin, both PWMs are reported
4. More PWM/Timer info is reported
One new item that may cause some concern is the usage of the LINE
predefined preprocessor macro. It may not be available if the Arduino
IDE goes to a different compiler.
Includes support for 1284 & 1286 families.
Memory usage changes when enabling PINS_DEBUGGING:
ATmega2560
FLASH
. without 52576
. with new 64592
. with old 62826
. new-out 12016
. old-out 10250
. new-old 1766
.
RAM
. without 2807
. with new 2875
. with old 3545
. new-out 68
. old-out 738
. new-old -670
==================================================================
minor changes - mostly formatting
1) added newline to end of teensyduino file
2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings
about redefining TEENSYDUINO
3) removed some trailing spaces
reduce PROGMEM size & update pin list
Reduced PROGMEM usage by
1) converting often used macro to a function
2) moved as much as possible into the function
This required creating two arrays of address pointers for the PWM
registers.
==================================================================
update with new M3, M4, M5 pin names
==================================================================
report I/O status for unused/unknown pins
2017-04-06 14:46:28 -05:00
Scott Lahteine
4abd53f65a
Adjust indentation in ubl.h
2017-04-06 05:36:16 -05:00
Scott Lahteine
f5c5c1f771
Rename all UBL files with a ubl_ prefix
2017-04-06 05:33:27 -05:00
benlye
f1d50ac1dc
Fixing bilinear Z offset and G29 Z
...
The fix in #6251 for bilinear Z offset was flawed and broke the Z parameter of G29 for bilinear levelling. This is reverted and a different fix is used for the double-addition of the Z-probe offset to the bilinear correction grid.
2017-04-06 07:41:46 +01:00
Scott Lahteine
eb1e6aa29b
Use same config name for all mesh dimensions
2017-04-06 00:42:52 -05:00
Scott Lahteine
c961dd084d
Add hidden option to output Bilinear grids in JSON
2017-04-05 23:43:17 -05:00
Scott Lahteine
df7b4252fd
Reduce M420 code for UBL slightly
2017-04-05 22:30:29 -05:00
Scott Lahteine
8866158d03
Add LEVELING_DATA as a capability
2017-04-05 22:30:28 -05:00
benlye
0a2b4f3486
Fix bilinear levelling z offset
...
Since run_probe was altered to return the probe Z position rather than the nozzle Z position bilinear levelling has been broken because the Z-offset has been applied twice - once in the run_probe function, and then again in the G29 code for bilinear levelling.
2017-04-05 22:01:40 -05:00
Scott Lahteine
44a849bdce
Fix broken M206/M428/G92 offsets
2017-04-05 22:01:37 -05:00
Roxy-3D
52978e5ba5
Fix spelling mistake when UBL's mesh is Inactive
2017-04-02 20:07:09 -05:00
Roxy-3D
0423e93c42
Fix M421 AUTO_BED_LEVELING_BILINEAR and AUTO_BED_LEVELING_UBL
...
M421 was not connected up for AUTO_BED_LEVELING_BILINEAR.
M421 needed to migrate mesh data to new UBL EEPROM layout.
2017-04-02 16:46:37 -05:00
Scott Lahteine
3412950abc
Merge pull request #6209 from thinkyhead/rc_psu_zero
...
Power Supply 0 as "General"
2017-04-02 16:44:42 -05:00
Roxy-3D
3e9e94801f
Fix problem described in issue # 6175
...
As it turns out... an unsigned int can not go to less than 0, so the
loop never terminates.
2017-04-02 13:00:27 -05:00
Scott Lahteine
289e3d6844
Merge pull request #6215 from thinkyhead/rc_bed_false_alarm
...
Fix thermal runaway when nonexistent bed temp is set
2017-04-02 11:59:58 -05:00
Scott Lahteine
948728e63b
Fix line-endings in UBL_G29
2017-04-02 11:48:26 -05:00
Scott Lahteine
699310d1d2
Fix: Thermal runaway if nonexistent bed's temp is set
2017-04-02 11:48:10 -05:00
Scott Lahteine
c56eec29f0
Configurable delay for BLTouch servo emulation
2017-04-02 11:14:53 -05:00
Scott Lahteine
deaad78df9
Merge pull request #5678 from Bob-the-Kuhn/G38-optional-double-tap
...
G38 bug fix, made double touch optional & reverted to Z_MIN_PROBE
2017-04-02 10:32:04 -05:00
Scott Lahteine
5bce731962
Fix LCD preheat menus
2017-04-02 09:32:22 -05:00
Scott Lahteine
4c72167af3
Prevent a warning on echo_command
2017-04-02 08:36:58 -05:00
Scott Lahteine
9b5fd9522e
Fix formatting, order for a UBL change
2017-04-02 07:15:40 -05:00
Tannoo
54173c80ad
Power Supply 0 as "General"
2017-04-02 06:21:34 -05:00
Scott Lahteine
a2775d0c70
can wstring be removed?
2017-04-02 04:43:33 -05:00
Scott Lahteine
de4e19f17e
Patch MarlinSerial to match up with 32-bit version
2017-04-02 04:39:18 -05:00
Scott Lahteine
2cbc7b4b73
Relocate serial macros and functions
2017-04-02 01:05:25 -05:00
Scott Lahteine
eaa66f3c46
Indent MarlinSerial code
2017-04-02 01:05:25 -05:00
Scott Lahteine
7a7a80e6c5
status_printf => lcd_status_printf_P
2017-04-02 01:05:25 -05:00
Scott Lahteine
0e6ec34228
Use PSTR versions of lcd_status... to save SRAM
2017-04-02 00:45:39 -05:00
Scott Lahteine
34e2420b9b
Apply const args, clean up find_closest_circle_to_print
2017-04-01 23:15:41 -05:00
Scott Lahteine
e19fbd27ce
Minor spelling patch
2017-04-01 23:08:00 -05:00
Scott Lahteine
790a3e9a8c
Remove extraneous check of UBL_G26_MESH_EDITING
2017-04-01 23:03:40 -05:00
Scott Lahteine
7310110ec0
Fix logic of UBL::fade_scaling_factor_for_z
2017-04-01 22:52:48 -05:00
Scott Lahteine
1a775cecac
Revert behavior of enqueue_and_echo_commands_P
2017-04-01 21:53:46 -05:00
Scott Lahteine
79d42d87c1
Syntax cleanup
2017-04-01 21:53:46 -05:00
Scott Lahteine
b47fd31c37
Revert some changes to UBL
2017-04-01 21:53:45 -05:00
Bob-the-Kuhn
185337e787
add delays to allow stop & kill messages to get out
2017-04-01 00:23:14 -05:00
Scott Lahteine
63abb65146
Update description of PINS_DEBUGGING
2017-03-31 18:57:48 -05:00
Scott Lahteine
73e193da1d
Implement LCD_BED_LEVELING for PROBE_MANUALLY
2017-03-31 11:50:18 -05:00
Scott Lahteine
fcadc7bb1a
Implement the "manual" option for ABL
2017-03-31 11:50:18 -05:00
Scott Lahteine
9e22184936
Add a "manual" option for ABL
2017-03-31 11:50:18 -05:00
Scott Lahteine
541165e878
Merge pull request #6181 from thinkyhead/rc_ubl_further_fixes
...
Further adjustments to UBL code
2017-03-31 11:35:02 -05:00
Scott Lahteine
b19a15fa7f
Within applied to UBL
2017-03-31 11:12:57 -05:00
Scott Lahteine
342ee458ae
Additional UBL fixes, optimizations
2017-03-31 11:12:57 -05:00
Scott Lahteine
a5e085cbea
Have run_probe() return probe Z, not nozzle Z
2017-03-31 09:27:49 -05:00
Scott Lahteine
4487d22d56
Apply FIXFLOAT macro
2017-03-31 09:27:48 -05:00
Scott Lahteine
6cac0f43eb
MBL fiddle
2017-03-31 09:27:48 -05:00
Scott Lahteine
25a6bfa7ed
Add and apply WITHIN macro
2017-03-31 09:27:48 -05:00
Scott Lahteine
81136c1e82
Merge pull request #6177 from thinkyhead/rc_tinyboy
...
Support for TinyBoy 2 3D printer (and its OLED display)
2017-03-31 04:31:47 -05:00
Scott Lahteine
93aad54dc1
Clean up code, remove _now command function
2017-03-31 04:17:31 -05:00
Stefan Brüns
6ba6c92a81
Add example configuration for TinyBoy L10/L16
...
The TB2 is a Indiegogo funded 3d printer. It uses a MKS SMELZI V1.0
main board (based on MELZI, i.e. Sanguinololu). I comes as a complete kit,
including display and panel.
Two variants exists, L10 and L16, with a height of 100 and 160 mm.
The heating function of the provided bed can enabled by soldering a
thermistor and some wires to it.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-31 04:05:35 -05:00
Stefan Brüns
0fe57ad4f5
Add Support TinyBoy2 OLED/Encoder panel
...
The OLED is driven by an SSD1306, connected to the board via
I2C, the rotary encoder is connected to 3 GPIO pins.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-31 04:05:34 -05:00
Scott Lahteine
65ca6472ba
Make G26 compatible with G92 and M206
2017-03-31 02:20:20 -05:00
Scott Lahteine
4902fd4e95
More data in UBL class, make it a static class
...
- Make all `unified_bed_leveling` data/methods static
- Move some UBL-related variables into the class
- Replace `map_[xy]_index_to_bed_location` with `mesh_index_to_[xy]pos`
2017-03-31 02:20:20 -05:00
Scott Lahteine
edbc024d76
Disable UBL_G26_MESH_EDITING by default
2017-03-31 02:20:20 -05:00
Scott Lahteine
9e4bd6b3b5
Further repairs to UBL, comments, spacing
2017-03-31 02:20:20 -05:00
Bob-the-Kuhn
f3618c3337
Reduce UBL RAM usage by making G26/G29 optional
2017-03-31 02:20:19 -05:00
Scott Lahteine
c9eb1d6ab7
Make MBL a static class, use lookup for index-to-point conversion
2017-03-31 01:28:07 -05:00
Scott Lahteine
de9d2cddc3
Merge pull request #6152 from thinkyhead/rc_cleanup_6150_etc
...
UBL cleanup, optimization
2017-03-30 17:40:29 -05:00
Scott Lahteine
9217e4b8ec
Various UBL cleanups and bug fixes
2017-03-30 17:09:49 -05:00
Scott Lahteine
9924199802
Merge pull request #5908 from thinkyhead/rc_fix_slowdown
...
General minor cleanup
2017-03-29 21:43:33 -05:00
Scott Lahteine
0e71e7b2fb
Cleanup to planner.cpp
2017-03-29 06:48:07 -05:00
Scott Lahteine
f105cad43c
Marlin: Slight cleanup to Marlin_main.cpp
2017-03-29 06:40:29 -05:00
Scott Lahteine
499f9e04e1
Marlin: Temperature soft-PWM cleanup
2017-03-29 06:37:27 -05:00
Scott Lahteine
7ddd94dc61
Merge pull request #5994 from StefanBruens/fix_Makefile_errors
...
Fix makefile errors, cleanup
2017-03-29 06:32:08 -05:00
Scott Lahteine
af09095f03
Merge pull request #6154 from thinkyhead/rc_fil_sensor_vs_sd
...
Show Filament Width on LCD when SD is disabled
2017-03-29 05:24:48 -05:00
Remo Kallio
d38b1bc4b1
Show filament width sensor values in LCD constantly if SD card support is not enabled.
2017-03-29 04:03:08 -05:00
Scott Lahteine
e3459ec178
Merge pull request #5989 from MagoKimbra/rc_fix_delta_angles
...
Fix delta_angles
2017-03-29 03:35:18 -05:00
Scott Lahteine
f49aec057f
Tweak "can not" => "can't" in RUMBA pins
2017-03-29 01:04:50 -05:00
Scott Lahteine
0a23a1bb3b
Dynamic feedrate on SCARA, converting target mm/s to deg/s
2017-03-28 17:21:07 -05:00
Roxy-3D
d8724bb546
Get G29's P1 (Automated Probing) working again.
...
Incorrect optimizations of data types and ternary operators caused some
issues.
2017-03-28 17:11:02 -05:00
Scott Lahteine
c7f6ee9c93
Board A4JP should be SCOOVO_X9H
2017-03-27 22:22:13 -05:00
Scott Lahteine
a9fc30ae2e
Use safe_delay to ensure watchdog reset
2017-03-26 23:49:56 -05:00
Roxy-3D
171904b6c7
Make G29 What command print reliably and fix G29 P1 bug Waldo found
2017-03-26 17:05:58 -05:00
Roxy-3D
9d3ac66f73
Map clean up of UBL
...
UBL's maps are cleaner. And with a 1 value, G29 O 1 will generate a
map suitable to be Cut & Pasted into Excel so a Suface Map can be
generated.
2017-03-25 18:55:05 -05:00
Roxy-3D
9a1949a91e
Cleaned up G26 ready to replace existing one at MarlinFirmware/Marlin
2017-03-25 10:15:40 -05:00
Roxy-3D
aec85ad45a
Start of process to get UBL running again.
...
The wait_for_user change totally broke UBL. But there is stuff wrong
now in the thermal code and/or LCD Panel code.
2017-03-24 18:38:27 -05:00
Scott Lahteine
b47eaf14ae
Merge pull request #6109 from thinkyhead/rc_soft_pwm_dither
...
PWM dithering followup
2017-03-24 18:21:07 -05:00
Scott Lahteine
34d1c41b5f
Merge pull request #6111 from benlye/benlye-patch-echo_command
...
Fix type conversion issue with echo_command
2017-03-24 17:57:28 -05:00
benlye
6a601aca35
Fix type conversion issue with echo_command
...
With the the current definition of echo_command I cannot compile RCBugFix (Arduino IDE 1.8.1) with the error "invalid conversion from 'const char*' to 'char*'". This change resolves that.
2017-03-24 17:23:02 +00:00
Scott Lahteine
009a6ddd39
Adjust bilinear grid in M851
2017-03-24 06:28:59 -05:00
Scott Lahteine
eab7854a73
Merge pull request #6074 from thinkyhead/rc_immediate_shove
...
Immediate commands take precedence
2017-03-24 05:52:27 -05:00
Stefan Brüns
5699e2b881
Add SOFT_PWM_DITHER to other configurations
2017-03-24 05:02:24 -05:00
Scott Lahteine
5a2abeca78
Merge pull request #6100 from thinkyhead/rc_soft_pwm_dither
...
Enhancement of PWM, with dithering
2017-03-24 04:57:40 -05:00
Scott Lahteine
043be2856b
Use "& 0x3F" instead of "% 64"
2017-03-24 04:13:50 -05:00
Stefan Brüns
6a040a6967
SOFT_PWM: Do not switch off heaters twice on pwm_count wraparound
...
After wraparound, pwm_count <= pwm_mask holds, thus soft_pwm_X <= pwm_count
guarantees soft_pwm_X < pwm_mask is true, and the heater will be switched
off in the first branch.
Do not evaluate the pwm conditions a second time, this reduces the
instruction count (4 instructions per PWM) and text size (6 byte).
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-24 04:13:50 -05:00
Stefan Brüns
0a74774af1
soft_pwm: avoid useless refetches of pwm_count
...
The compiler is not able to reuse the value of pwm_count, but reloads it
on every evaluation, if is stored in a static variable, as it cannot prove
it will be unchanged. A variable with local scope may not be modified from
the outside, so its value can be reused.
Doing so reduces text size and instruction count.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-24 04:13:50 -05:00
Stefan Brüns
35a55d5757
SOFT_PWM: Implement dithering if SOFT_PWM_SCALE is 1 or more
...
If dithering is enabled, the remainder of the soft_pwm_X duty value at
turnoff time is added to the next cycle. If e.g. the duty is set to 9 and
SCALE is set to 2, the PWM will be active for 8 counts for 3 cycles and
12 counts on each fourth cycle, i.e. the average is 9 cycles.
This compensates the resolution loss at higher scales and allows running
fans with SOFT_PWM with significantly reduced noise.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-24 04:13:36 -05:00
Stefan Brüns
2aed66a955
temperature: Fix SOFT_PWM off by one
...
A 128 step PWM has 127 intervals (0/127 ... 127/127 duty). Currently, a
PWM setting of 1/127 is active for 2/128, i.e. double the expected time,
or, in general n+1/128 instead of n/127.
Fixes issue#6003.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-24 04:13:36 -05:00
Scott Lahteine
b5711a99a2
Patches to bring UBL closer to compliance
2017-03-24 01:37:52 -05:00
Scott Lahteine
d076c1b604
Apply some general cleanup to code
2017-03-24 01:37:51 -05:00
Scott Lahteine
d1e6b0e21a
Reduce STEP_PULSE_CYCLES code slightly
2017-03-24 00:50:05 -05:00
Scott Lahteine
783338a0b8
Add UBL_MESH_EDIT_ENABLED to configs
2017-03-24 00:44:55 -05:00
Scott Lahteine
8d54ffbf05
Adjust vector_3 code with const, some optimization
2017-03-23 19:41:42 -05:00
Roxy-3D
8ee2612ebb
The hex nibble routine can print again!
...
The code to print a hex nibble got broke. SERIAL_ECHO( (char) ) isn't
suitable for its use.
2017-03-23 16:08:37 -05:00
Roxy-3D
b8e4a6970b
Get UBL up and running again
...
All the changes to get the code into compliance with Marlin coding
standards made UBL sick. This pretty much gets UBL back up and
running.
2017-03-23 16:08:37 -05:00
Roxy-3D
5de1da2b3c
Make UBL honor the #define ENABLE_LEVELING_FADE_HEIGHT option
2017-03-23 16:08:37 -05:00
Scott Lahteine
8f9face956
Merge pull request #6088 from rafaljot/patch-3
...
Update Marlin_main.cpp
2017-03-23 01:51:51 -05:00
Scott Lahteine
782634b6c9
Merge pull request #6081 from Sebastianv650/MIN_STEPPER_PULSE_for_Babystepping
...
Add MINIMUM_STEPPER_PULSE ability to babystepping
2017-03-22 21:57:36 -05:00
Scott Lahteine
af2ea23e9c
EXTRUDER_RUNOUT_PREVENT uses buffer_line_kinematic
2017-03-22 20:51:12 -05:00
Scott Lahteine
cd882b88db
#if defined => #ifdef / PIN_EXISTS
2017-03-22 20:51:11 -05:00
Scott Lahteine
e244399766
Additional cleanup of UBL code
2017-03-22 20:51:10 -05:00
Bob-the-Kuhn
0934563b97
G38 optional double touch
...
Made the double touch portion a conditional compile based on the
PROBE_DOUBLE_TOUCH flag.
==============================================
Bugfix
The current G38 only stopped a move if it involved the Z axis.
Moved all the G38 code to it's own section and put it where it would
always be executed no matter what axis was moving or if the endstop was
enabled.
Also added a comment to configuration_adv to alert the user the double
tap had to be turned on.
==============================================
Change G38 back to using Z_MIN_PROBE
There's no Z_MIN endstop if Z_DUAL_ENDSTOPS is enabled and you have them
set to the top of the gantry.
G38 started out as using the Z_MIN_PROBE pin. I don't remember why we
changed it to the Z_MIN endstop.
2017-03-22 15:08:49 -05:00
Scott Lahteine
cc3204509c
UBL patch from Bob-the-Kuhn
2017-03-22 07:54:20 -05:00
Scott Lahteine
b904b5ae8d
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
Sebastianv650
bf57eb2447
Protect Babystepping against other ISRs
...
Especialy against stepper ISR.
This is even more important when a minimum pulse width is set,
increasing the runtime of a babystep.
2017-03-21 18:05:44 +01:00
Sebastianv650
80830919dc
Add MINIMUM_STEPPER_PULSE ability to babystepping
2017-03-21 17:50:38 +01:00
rafaljot
6da949bbf0
Update Marlin_main.cpp
...
Sometimes after killing heaters are still on.
2017-03-21 15:06:01 +01:00
Roxy-3D
72f7b14e66
Make G29's Interactive Mesh Editor Work
2017-03-20 12:52:51 -05:00
Roxy-3D
3fd74b121f
Get G29's Interactive Mesh Editor running
...
G29 P4 R O should work now.
2017-03-20 12:52:51 -05:00
Roxy-3D
1d58558bec
Spelling fix
2017-03-20 12:52:51 -05:00
Scott Lahteine
2573f4dd05
Merge pull request #6052 from thinkyhead/rc_lift_on_pause
...
Add PARK_HEAD_ON_PAUSE feature / M125
2017-03-20 03:36:31 -05:00
Scott Lahteine
48c6284c91
Immediate commands take precedence
2017-03-19 21:50:48 -05:00
Roxy-3D
76c270fdf2
Allow FWRETRACT with UBL Enabled
...
The retraction flag in UBL's G26 was conflicting with the FWRETRACT option.
All fixed!
2017-03-19 15:43:12 -06:00
Roxy-3D
c377c59d47
Allow G29 P1 R to generate the mesh
...
Fix the logic change that happened when UBL got merged.
2017-03-19 15:13:33 -06:00
Scott Lahteine
ff0dd162b7
PARK_HEAD_ON_PAUSE implementation
2017-03-19 07:27:35 -05:00
Scott Lahteine
26473cab6d
Add PARK_HEAD_ON_PAUSE feature
2017-03-19 05:06:55 -05:00
Scott Lahteine
4cf51157b3
Use XYZE rather than NUM_AXIS
2017-03-19 01:14:39 -05:00
Scott Lahteine
4c7f14752a
Add disable_e_steppers function
2017-03-19 01:14:39 -05:00
Scott Lahteine
8eb29f91e6
Patch filament change options and beep code
2017-03-19 01:14:39 -05:00
Scott Lahteine
56c9dfc83b
Merge pull request #6066 from thinkyhead/rc_felix_fix
...
Update Felix config for UBL
2017-03-19 01:11:02 -05:00
Scott Lahteine
9b2b53f63a
Merge pull request #6042 from thinkyhead/rc_fix_toolchange_z
...
Move Z last in tool-change for SWITCHING_EXTRUDER
2017-03-19 00:34:41 -05:00
Scott Lahteine
f98fb6b38e
Update Felix config for UBL
2017-03-19 00:28:48 -05:00
Scott Lahteine
7cabe81373
Merge pull request #6057 from thinkyhead/rc_followup_6054
...
Followup 6054 with some cleanup
2017-03-18 13:49:20 -05:00
Scott Lahteine
4bca27ab89
Fix Kelvin conversion
...
Thanks to @ospalh -- #6056
2017-03-18 13:23:08 -05:00
Scott Lahteine
143ab8f329
Remove Roxy's personal configurations
2017-03-18 12:35:02 -05:00
Scott Lahteine
2512871a36
Patch configs UBL followup
2017-03-18 12:32:03 -05:00
Scott Lahteine
27b5666e15
Move Allen Key probe definition to the top
2017-03-18 12:27:37 -05:00
Scott Lahteine
77cf648ed3
Move menu selection past static items in 1 screen
2017-03-18 12:26:21 -05:00
Scott Lahteine
2c630a1b5c
Merge pull request #6054 from thinkyhead/rc_ubl_renewal
...
UBL for RCBugFix — cleanup, rebase, patch
2017-03-18 12:07:57 -05:00
Scott Lahteine
0492a3a8f1
Merge pull request #6027 from Bob-the-Kuhn/add_kill_info
...
Message for every KILL and STOP
2017-03-18 11:49:35 -05:00
Scott Lahteine
6618346148
Patches to work around "register spill" compiler bug
2017-03-18 11:35:21 -05:00
Scott Lahteine
be7dd90382
Add Thermistor 75: MGB18 silicon pad
2017-03-18 11:35:20 -05:00
Scott Lahteine
b0a9c82c31
Fix single-char echo and pinMode usage
2017-03-18 11:35:20 -05:00
Scott Lahteine
fb60aa3736
UBL implementation
2017-03-18 11:35:20 -05:00
Scott Lahteine
238b8fd2a3
UBL core and support files
2017-03-18 11:35:19 -05:00
Scott Lahteine
cf94688925
Univeral Bed Leveling - configuration
2017-03-18 11:35:19 -05:00
Scott Lahteine
03aa424ccb
Merge pull request #6053 from thinkyhead/rc_clean
...
Remove extraneous whitespace
2017-03-18 03:26:45 -05:00
Scott Lahteine
af644871bf
Merge pull request #6045 from thinkyhead/rc_remove_raw_kinematics
...
Remove delta optimization concepts… for now
2017-03-18 03:26:24 -05:00
Scott Lahteine
77491dd924
Remove extraneous whitespace
2017-03-18 03:17:39 -05:00
Scott Lahteine
b865b21d32
Can't use Z fade height with DELTA
2017-03-17 08:34:47 -05:00
Scott Lahteine
1e57b0c269
Remove delta interpolation concept
2017-03-17 06:32:11 -05:00
Scott Lahteine
e46898f8e5
Remove kinematic optimizations
2017-03-17 06:30:22 -05:00
Scott Lahteine
11f1fdfab4
_lcd_level_bed_position => manual_probe_index
2017-03-17 06:05:17 -05:00
Scott Lahteine
0e410c9dfd
Software endstop options as simple switches
2017-03-17 06:05:17 -05:00
Scott Lahteine
d01b915085
Implement soft_endstops_enabled for clamping
2017-03-17 06:05:17 -05:00
Scott Lahteine
e4649c9044
Add HAS_SOFTWARE_ENDSTOPS macro
2017-03-17 06:05:17 -05:00
Scott Lahteine
3e927ff204
Replace MBL Z hacking
2017-03-17 06:05:17 -05:00
Scott Lahteine
4e53124681
Merge pull request #6039 from Bob-the-Kuhn/M114-sync-with-stepper
...
M114 - wait for move completion before reporting position
2017-03-17 05:22:46 -05:00
Scott Lahteine
734f9ea133
Merge pull request #6040 from thinkyhead/rc_sanity_use_assert
...
Simplify some sanity checks with static_assert
2017-03-17 05:22:17 -05:00
Scott Lahteine
f02af83d42
Remove some extraneous spaces
2017-03-16 23:59:11 -05:00
Scott Lahteine
672e45652e
Improved solution to tool-change bug
2017-03-16 23:59:10 -05:00
Scott Lahteine
23f1cfb46f
Fix stuck CHDK pin as suggested in #6041
2017-03-16 21:49:39 -05:00
Scott Lahteine
0b22069e82
Merge pull request #6021 from Bob-the-Kuhn/BUG-FIX--Switching-extruder-tool-change-Z-height
...
Bug Fix: Switching extruder tool change leaves Z in wrong position
2017-03-16 21:15:20 -05:00
Scott Lahteine
e7e4500629
Simplify some sanity checks with static_assert
2017-03-16 16:31:34 -05:00
Bob-the-Kuhn
34ff0c3439
M114 - wait for move completion before reporting position
2017-03-16 15:10:45 -05:00
Bob-the-Kuhn
b31604a492
Message for every KILL and STOP
...
No more mystery halts & resets
Moved messages to language.h
Added current command to inactive timeout message
2017-03-15 21:05:11 -05:00
Kai
13b44d019b
Update language_de.h
...
Addition of missing strings to match language_en.h
2017-03-15 16:06:52 +01:00
Bob-the-Kuhn
685ed5393a
Bug Fix: Switching extruder tool change leaves Z in wrong position
...
The tool_change function saves the current_position to the destination
array soon after starting. Later in the switching extruder section, the
destination array is modified when moving the Z axis up & down. A later
section of tool_change moves the head back to the “original location”
using the destination array. This later section assumes that the
destination array hasn’t been modified.
The fix is to save the destination Z position and then restore it after
the Z movements have completed.
Going back to using the current_position array for the switching
extruder Z axis moves (and leaving the destination array untouched)
doesn’t fix the problem.
This bug was introduced by the “Make tool_change kinematic compatible”
commit # 847429eff4
2017-03-14 02:36:24 -05:00
Scott Lahteine
51353f8fea
Merge pull request #6000 from trivalik/NoWorkspaceWarning
...
prevent warning with define of NO_WORKSPACE_OFFSETS
2017-03-12 00:00:51 -06:00
MagoKimbra
a4a9bd8bc9
Fix BUG set_position_mm
...
Set postion must have axis and not E_AXIS + active_extruder.
2017-03-11 14:13:39 +01:00
Trivalik
71ac6f9d42
prevent warning with define of NO_WORKSPACE_OFFSETS
2017-03-09 23:49:57 +01:00
Stefan Brüns
9ba6c051a1
Makefile: add nozzle.cpp too CXXSRC list
...
The file is required by the optional NOZZLE_PARK_FEATURE.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-09 03:08:49 +01:00
Stefan Brüns
9cc8d495b8
Makefile: remove no longer existing search paths
...
ArduinoAddons has been removed from Marlin, remove any references to it.
Replace HARDWARE_SRC and HARDWARE_DIR with its expanded equivalents.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-09 01:46:47 +01:00
Stefan Brüns
bf563e62c1
Makefile: add printcounter.cpp too CXXSRC list
...
The file is required by the optional PRINTCOUNTER feature.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-09 01:45:54 +01:00
Stefan Brüns
ddecc1441d
Makefile: Fix linker error
...
Instantiation of the static singleton instance thermalManager in general
requires locking, but we know its safe to do without.
Add -fno-threadsafe-statics to avoid using locking primitives, which
result in linking errors:
undefined reference to `__cxa_guard_acquire'
undefined reference to `__cxa_guard_release'
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-09 01:45:38 +01:00
MagoKimbra
37a26dfc09
Fix delta_angles
2017-03-08 09:23:30 +01:00
Scott Lahteine
2defb1d748
Use SET_INPUT_PULLUP where appropriate
2017-03-07 23:43:33 -06:00
Scott Lahteine
58b3e98878
Use arrays for delta tower parameters
2017-03-07 19:00:22 -06:00
Scott Lahteine
47242a40bb
Apply updated changes for delta_tower_angle_trim
2017-03-07 18:15:11 -06:00
Jimmy Envall
00b6b3da79
Added support for delta tower angle corrections.
2017-03-07 16:35:58 -06:00
Scott Lahteine
5a456c832a
Apply TMC2130 to example configurations
2017-03-07 04:22:06 -06:00
Scott Lahteine
45f949d833
TMC2130 Library: @teemuatlut replaces @makertum
2017-03-07 04:22:06 -06:00
Scott Lahteine
33f8a8a344
Merge pull request #5973 from thinkyhead/rc_circle_pattern
...
Add circle pattern to nozzle clean
2017-03-06 04:47:01 -06:00
Scott Lahteine
94b3e0a483
Merge pull request #5959 from benlye/benlye-fixm48
...
Remove extra carriage return in M48 V1 output
2017-03-06 04:24:28 -06:00
Scott Lahteine
a9a1971295
Merge pull request #5972 from thinkyhead/rc_cooldown_before
...
Fix preheat menu formatting
2017-03-06 03:21:29 -06:00
Scott Lahteine
6aa81255a9
Patch and clean up "flsun" kossel. Followup to #5911 .
2017-03-06 03:15:00 -06:00
Scott Lahteine
b2270b3f3e
Apply prior nozzle clean update
2017-03-06 03:14:59 -06:00
Marek Pikuła
7698c5617a
Added circle nozzle cleaning parameters to example configurations
2017-03-06 03:04:58 -06:00
Marek Pikuła
6836b94eea
Added circle pattern for nozzle cleaning feature
2017-03-06 03:03:00 -06:00
Scott Lahteine
3b75518ef6
Merge pull request #5911 from aphex3k/flsun_kossel_mini
...
Configuration.h and Configuration_adv.h for the kossel mini by flsun
2017-03-06 02:26:01 -06:00
Scott Lahteine
3830778852
Apply NO_WORKSPACE_OFFSETS to lcd menu
2017-03-06 02:21:42 -06:00
Scott Lahteine
7e3aab889d
Fix preheat menu formatting
2017-03-06 02:07:07 -06:00
Scott Lahteine
fea0d3f20f
Endstop and temp-isr general cleanup
2017-03-06 02:07:07 -06:00
Scott Lahteine
aef08e8780
Compact some macro substitutions
2017-03-06 02:07:07 -06:00
Scott Lahteine
2f620f86d9
Merge pull request #5970 from thinkyhead/rc_cooldown_before
...
Preheat Hotend Only menu items
2017-03-06 01:56:05 -06:00
Scott Lahteine
02de8e6f18
Merge pull request #5957 from MagoKimbra/rc_stepper_indirection_fix
...
Stepper indirection fix tmc driver
2017-03-06 01:16:40 -06:00
Scott Lahteine
6c5312559c
Menu item to preheat only the hotend
2017-03-06 01:14:54 -06:00
Scott Lahteine
9d0142e8ae
Move Change Filament above Cooldown
2017-03-06 01:13:12 -06:00
Scott Lahteine
0c55095c5e
Move Cooldown above Preheat
2017-03-06 01:13:12 -06:00
Scott Lahteine
c15c65f18a
Merge pull request #5971 from thinkyhead/rc_fix_e_factors
...
Patch DISTINCT_E_FACTORS bug
2017-03-06 01:11:17 -06:00
Scott Lahteine
bfb0007573
Patch DISTINCT_E_FACTORS bug
2017-03-05 23:19:31 -06:00
Scott Lahteine
be98016674
Merge pull request #5963 from thinkyhead/rc_no_offsets_optim
...
New option: NO_WORKSPACE_OFFSETS
2017-03-05 21:46:49 -06:00
Scott Lahteine
8e89a802f7
Document PROTOCOL_VERSION
2017-03-05 04:43:46 -06:00
Scott Lahteine
87b03b16bd
Use a macro for array copies
2017-03-05 04:43:46 -06:00
Scott Lahteine
e141f3a03f
Optimize coordinate transformation
...
Pre-compute the combined position shift and home offset to save a
single float fetch-and-add per conversion. Great for delta/scara and
bed leveling.
2017-03-05 04:43:16 -06:00
Scott Lahteine
5f7e85398b
Implement NO_WORKSPACE_OFFSETS
2017-03-05 04:43:15 -06:00
Scott Lahteine
05abe853f9
New option: NO_WORKSPACE_OFFSETS
2017-03-05 04:43:15 -06:00
Scott Lahteine
20addc6e32
Merge pull request #5955 from thinkyhead/rc_eeprom_fail_better
...
Display a message for EEPROM version mismatch
2017-03-04 17:15:07 -06:00
benlye
dead89062a
Update Marlin_main.cpp
...
Remove unnecessary line break from M48 V1 output.
2017-03-04 17:58:10 +00:00
MagoKimbra
ae277aebc6
Stepper indirection fix tmc driver
2017-03-04 12:17:39 +01:00
Scott Lahteine
8f4e4b1995
Display a message for EEPROM version mismatch
2017-03-04 01:20:36 -06:00
Scott Lahteine
177ad245f6
Merge pull request #5953 from thinkyhead/fix_fc_e_index
...
Fix submenu hotend status display
2017-03-04 00:12:29 -06:00
Scott Lahteine
cea3ea772c
Fix submenu hotend status display
2017-03-03 22:12:22 -06:00
Scott Lahteine
b27f69ba51
Merge pull request #5813 from thinkyhead/rc_fix_makrpanel
...
Fix MAKRPANEL assignments
2017-03-03 21:40:49 -06:00
Scott Lahteine
1ef6ccd919
Merge pull request #5951 from thinkyhead/rc_print_2d_array
...
Reduce code size (40b, or 166b with bilinear subdivision)
2017-03-03 21:27:44 -06:00
Scott Lahteine
53f5086905
Fix MAKRPANEL assignments
...
MAKRPANEL is a DOGLCD+ULTRA_LCD+NEWPANEL so customize its pins within
that block.
2017-03-03 21:22:21 -06:00
Scott Lahteine
98c7b682ca
General cleanup, const usage, var naming
2017-03-03 20:57:49 -06:00
jes
369bfc8a1e
Reduce code size (40b, or 166b with bilinear subdivision)
2017-03-03 20:36:32 -06:00
Scott Lahteine
0d13412105
Fix "Heating..." message
2017-03-03 12:12:51 -06:00
Scott Lahteine
5065636023
Merge pull request #5934 from thinkyhead/rc_advance_ed_ratio
...
LIN_ADVANCE: Fixed E/D ratio option
2017-03-03 03:24:41 -06:00
divendres
75ad82baab
Update Catalan language
2017-03-02 20:40:06 -06:00
Scott Lahteine
34253497d4
Babysteps code tweak
...
As suggested by https://github.com/MarlinFirmware/Marlin/pull/5887#issuecomment-283832163
2017-03-02 20:35:45 -06:00
Scott Lahteine
fb4aead2b1
Clean up and finish #5887
2017-03-02 20:16:29 -06:00
Scott Lahteine
b3e2bd6f29
Reduce E_D_ratio code
2017-03-02 01:00:37 -06:00
Sebastianv650
de6c40ed8f
Add option to fix E/D ratio
...
Work around for slicers producing buggy gcode.
2017-03-02 01:00:37 -06:00
Scott Lahteine
eeb490221f
Remove BEEPER_PIN override in pins_RIGIDBOARD.h
...
Resolves #5926 . This override is no longer needed since the RAMPS LCD controller pins were fixed.
2017-03-01 18:26:29 -06:00
Roxy-3D
11e892bd84
Merge pull request #5887 from Roxy-3D/RCBugFix
...
Double Click of Encoder Wheel Jumps to Z-BabyStepping
2017-03-01 17:15:02 -07:00
Scott Lahteine
cbeff12f8a
Merge pull request #5933 from teemuatlut/lcd_days_hours
...
Fix formatting of SD print time hours above one day
2017-03-01 15:44:10 -06:00
Scott Lahteine
8a4e9d08a3
Merge pull request #5931 from thinkyhead/rc_core_endstop_fix
...
Fix CoreYX / YZ / ZX endstop logic
2017-03-01 15:32:11 -06:00
teemuatlut
9175d16660
Fix formatting of print time hours above one day
2017-03-01 18:55:25 +02:00
Scott Lahteine
b6d9eb229f
Extend Core endstop commentary
2017-03-01 10:01:50 -06:00
Bob-the-Kuhn
c5e08e8761
CoreYX/YZ/ZX needs different endstop logic than CoreXY/YZ/XZ
...
In the endstop testing section, add the "reverse" logic in addition to "normal" core handling.
In CoreXY/YZ/XZ steppers rotating the same direction gives X movement. Opposing directions produces Y movement.
In CoreYX/ZY/ZX this is reversed. Same = Y, Opposite = X.
----
Fixes the issue where the Y endstop was being checked when moving in the X direction, etc.
2017-03-01 09:40:24 -06:00
Scott Lahteine
c759c26cca
Make LCD_TIMEOUT_TO_STATUS configurable
...
As suggested in
https://github.com/MarlinFirmware/Marlin/issues/5570#issuecomment-283059
065
2017-02-28 19:02:50 -06:00
Michael Henke
47729918fc
enable ENSURE_SMOOTH_MOVES
2017-02-27 20:42:49 -08:00
Michael Henke
330b981912
created Configuration.h and Configuration_adv.h for the kossel mini sold by flsun
2017-02-25 21:31:37 -08:00
Colin Gilgenbach
48b7e0f8d8
Nozzle Wipe Vertical Zig-Zag
...
- Add configuration support for zigzags in either the X or Y axis, for
wipe pads significantly longer in one dimension.
- Add configuration for default number of zig-zag triangles, vs. a
magic number in `Marlin_main.cpp`.
- Update description of auto nozzle wiping to match functionality
2017-02-25 21:52:43 -06:00
Scott Lahteine
f17b81b765
Add MAPPER_C2C3 to French language
2017-02-25 18:49:00 -06:00
Roxy-3D
7e607b06eb
Better comments on DOUBLE_CLICK_TIME_WINDOW
2017-02-23 13:13:57 -07:00
Scott Lahteine
34cba42104
Use PSTR for MSG_HEATING
2017-02-22 11:30:19 -06:00
Roxy-3D
584d147a02
fixup the indentation
2017-02-22 07:23:54 -07:00
Roxy-3D
e443e0e2a9
Fix scoping issues for double click to Z-Babystepping
2017-02-21 18:15:28 -07:00
Roxy-3D
17d1cd7c09
Double Click of Encoder Wheel Jumps to Z-BabyStepping
2017-02-21 18:08:19 -07:00
Roxy-3D
48d862377a
Double Click of Encoder Wheel Jumps to Z-BabyStepping
2017-02-21 18:04:31 -07:00
Scott Lahteine
cfdc189796
Merge pull request #5856 from thinkyhead/rc_fix_bad_comment
...
Remove non-applicable comment on MANUAL_Z_HOME_POS
2017-02-20 17:54:30 -06:00
dot-bob
cd68380ce6
Add status_printf to print messages to the lcd status line.
...
Also add a hotend indicator to the heating message displayed on the lcd status line.
2017-02-20 15:26:54 -06:00
Scott Lahteine
012aff6823
Merge pull request #5862 from thinkyhead/rc_fix_a_thing
...
Finish reducing of ABL_BILINEAR_SUBDIVISION
2017-02-18 21:36:28 -06:00
Scott Lahteine
b9187020c4
Finish reducing of ABL_BILINEAR_SUBDIVISION
2017-02-18 20:01:19 -06:00
Scott Lahteine
e282b72151
Remove non-applicable comment on MANUAL_Z_HOME_POS
2017-02-18 05:14:43 -06:00
Scott Lahteine
57f92a4632
Apply DISTINCT_E_FACTORS to sync_from_steppers
...
Followup to #5840
2017-02-18 04:36:41 -06:00
Scott Lahteine
4da8b1494b
Merge pull request #5854 from thinkyhead/rc_fixup_m600
...
M600 cleanup and bugfix
2017-02-18 04:27:13 -06:00
Scott Lahteine
dd02dba6e6
Merge pull request #5840 from MagoKimbra/rc_fix_lin_advanced_step_to_mm
...
Fix steps_to_mm for active extruders
2017-02-18 04:25:53 -06:00
Scott Lahteine
6e0b3fcc08
Optimize M600 heater status LCD items
2017-02-18 04:08:00 -06:00
Scott Lahteine
44b4e116bd
Commentary / style in gcode_M600
2017-02-18 04:08:00 -06:00
Scott Lahteine
561904345f
Tweak config ordering for M600
2017-02-18 00:01:31 -06:00
Scott Lahteine
284d6de9da
Remove some old code comments
2017-02-17 15:25:56 -06:00
MagoKimbra
3685224c1a
Fix steps_to_mm for active extruders
2017-02-15 21:45:39 +01:00
Scott Lahteine
4578c573fe
Pause the print job timer while in M600
2017-02-15 05:29:34 -06:00
Scott Lahteine
bfe6f71794
Simplify filament_change_beep function
2017-02-15 05:29:34 -06:00
Scott Lahteine
8289ea1316
Use a short name for the filament "endstop"
2017-02-15 05:29:34 -06:00
Scott Lahteine
d9dcef8a87
Spacing, coding standards
2017-02-15 05:29:34 -06:00
Scott Lahteine
931914e679
Apply M600 updates to all configs
2017-02-15 05:29:34 -06:00
Roxy-3D
8bf0b496b9
Improve M600 with timeout, wait for heatup.
2017-02-15 05:29:34 -06:00
Tannoo
c40fe2113c
Fix for broken MBL
...
LCD call was waiting forever, causing the system to hang.
2017-02-15 04:39:22 -06:00
Scott Lahteine
4d4745c0eb
Parenthesize some menu defines for safety
2017-02-14 23:12:27 -06:00
Scott Lahteine
47f9883b0f
Dynamic allocation for SDCARD_SORT_ALPHA
2017-02-14 21:37:25 -06:00
Scott Lahteine
a561bd5e3a
New feature: SDCARD_SORT_ALPHA
2017-02-14 21:37:24 -06:00
Scott Lahteine
c04d6b5aa6
Merge pull request #5829 from thinkyhead/rc_fix_isr_reentry
...
Combine fixes for LIN_ADVANCE and temperature ISR
2017-02-14 20:36:58 -06:00
Scott Lahteine
467f01435f
Merge pull request #5816 from thinkyhead/rc_abl_virt_reduce
...
Reduce memory use by ABL_BILINEAR_SUBDIVISION slightly
2017-02-14 08:41:44 -06:00
Scott Lahteine
97b6fb6381
Reduce / optimize LIN_ADVANCE code
2017-02-14 07:52:03 -06:00
Sebastianv650
271ced7341
Prevent re-entering of temperature ISR
...
If Marlin is inside the temperature ISR, the stepper ISR is enabled. If
a stepper event is now happening Marlin will proceed with the stepper
ISR. Now, at the end of the stepper ISR, the temperatre ISR gets enabled
again. While Marlin proceed the rest of the temperature ISR, it's now
vulnerable to a second ISR call.
2017-02-14 07:52:03 -06:00
Sebastianv650
1b59766fcb
Cleanup position_float
...
Hopefully fixes Marlin #5481
2017-02-12 13:09:06 +01:00
Scott Lahteine
a950c31e2d
Merge pull request #5815 from thinkyhead/rc_pulses_per_step
...
Give encoder pulse/steps conditionals their own block
2017-02-12 04:14:00 -06:00
Scott Lahteine
7176de8605
Merge pull request #5814 from thinkyhead/hotend_loop_always
...
Make HOTEND_LOOP more consistent, let compiler optimize it
2017-02-12 04:13:14 -06:00
Scott Lahteine
adec219ca5
Merge pull request #5811 from thinkyhead/fix_two_strings
...
No space after X: or A: in M114 output
2017-02-12 04:11:51 -06:00
jes
eaa829b58c
Reduce memory use by ABL_BILINEAR_SUBDIVISION slightly
2017-02-12 04:09:48 -06:00
Scott Lahteine
1c99ca82d8
Give encoder pulse/steps conditionals their own block
2017-02-12 03:57:57 -06:00
Scott Lahteine
e44294bb4d
Make HOTEND_LOOP more consistent, let compiler optimize it
2017-02-12 02:50:38 -06:00
Scott Lahteine
701f4a6d9d
Merge pull request #5729 from Bob-the-Kuhn/guaranteed-BLTouch-detection
...
guaranteed BLTouch detection
2017-02-12 01:13:35 -06:00
Scott Lahteine
c15b9a6a06
No space after X: or A: in M114 output
2017-02-12 00:10:03 -06:00
Scott Lahteine
e1702816f6
Fix SD_CHECK_AND_RETRY condition
...
Addressing #5806
2017-02-11 23:55:56 -06:00
Scott Lahteine
1bc5be3bdf
Cast DELTA_PRINTABLE_RADIUS to float in sq()
...
Addressing #5625
2017-02-11 23:28:39 -06:00
Bob-the-Kuhn
0369f97ec1
guaranteed BLTouch detection
...
To guarantee that the 5mS pulse from a BLTouch is recognized you need to
have the endstops.update() routine run twice in that 5mS period.
At 200 steps per mm, my system has problems below a feedrate of 120 mm
per minute.
Two things were done to guarantee the two updates within 5mS:
1) In interrupt mode, a check was added to the temperature ISR. If the
endstop interrupt flag/counter is active then it'll kick off the endstop
update routine every 1mS until the flag/counter is zero. This
flag/counter is decremented by the temperature ISR AND by the stepper
ISR.
2) In poling mode, code was added to the stepper ISR that will make sure
the ISR runs about every 1.5mS. The "extra" ISR runs only check the
endstops. This was done by grabbing the intended ISR delay and, if it's
over 2.0mS, splitting the intended delay into multiple smaller delays.
The first delay can be up to 2.0mS, the next ones 1.5mS (as needed) and
the last no less than 0.5mS.
=========================================
BLTouch error state recovery
If BLTouch already active when deploying the probe then try to reset it
& clear the probe.
If that doesn't fix it then declare an error.
Also added BLTouch init routine to startup section
2017-02-11 12:01:34 -06:00
Scott Lahteine
1e4d4e5915
Fix typo in language_uk
...
Thanks to @pavlus for this one
2017-02-10 15:34:31 -06:00
Scott Lahteine
7fe7a0c8be
Merge pull request #5793 from thinkyhead/rc_adjust_probe_output
...
Adjust probe_pt() terminal output to respect probe z-offset
2017-02-09 23:05:02 -06:00
Scott Lahteine
633c253bc1
Merge pull request #5792 from thinkyhead/rc_default_dac_vals
...
Default DAC values for RigidBoard V2
2017-02-09 22:56:03 -06:00
Florian Heilmann
7bbc31704c
Adjust probe_pt() terminal output to respect probe z-offset
2017-02-09 22:54:22 -06:00
Scott Lahteine
a245656db3
Merge pull request #5713 from gege2b/RCBF-French
...
French translation : Added missing strings as well as missing accents
2017-02-09 22:43:56 -06:00
jaysonkelly
713931338a
Default DAC values for RigidBoard V2
2017-02-09 22:39:00 -06:00
Bob-the-Kuhn
ae706233a8
pinsDebug for 644/1284 & USB646/1286 families
...
added conditional compilation for PWMs 1C & 3C
add Teensyduino compatibility
==========================================
changes per review - minor formatting changes
1) remove non-printable character at the end of line 687
2) split a really long comment into two lines
3) got rid of some trailing spaces
============================================
Made pinsDebug_Teensyduino.h the same between this PR and PR 5668 which
is for a re-written pinsDebug.h file.
The changes were:
1) added copyright @ GNU license header
2) a blank line crept in.
2017-02-09 07:24:02 -06:00
Gege2B
22dfcc9a71
French translation : Added missing strings as well as missing accents
2017-01-17 23:29:23 +01:00
Scott Lahteine
9b5515926a
Merge pull request #5696 from thinkyhead/rc_volumetric_default
...
Allow enabling volumetric filament on config load
2017-01-14 05:48:51 -08:00
Robert Kirk
0d147ead66
Allow enabling volumetric filament on config load
2017-01-14 04:37:49 -08:00
AnHardt
fa26767efe
Replace all remaining 'boolean' with 'bool'
2017-01-13 13:03:52 +01:00
AnHardt
f6858d9974
Fix M110 without leading N
...
Store N in the right variable.
This is too rarely used.
"mea culpa, mea culpa, mea maxima culpa"
2017-01-13 12:33:50 +01:00
Scott Lahteine
0c0c840ba8
Merge pull request #5683 from emartinez167/EMartinez-Changes
...
Updates to some incorrectly ended strings in the Spanish translation
2017-01-12 07:49:15 -08:00
Kai
25dae3bccc
Update language_de.h
...
Small corrections
2017-01-12 16:06:58 +01:00
emartinez167
7292145f4e
Fix for some wrong strings
...
On last commit, some strings were ended with the incorrect character.
This fixes it.
2017-01-12 22:35:04 +08:00
Scott Lahteine
93a9aa6b76
Merge pull request #5682 from thinkyhead/rc_spanish_jan
...
Updates to Spanish language
2017-01-12 06:14:10 -08:00
Scott Lahteine
7a9c1a279b
Merge pull request #5681 from thinkyhead/rc_prevent_boot_loop
...
Reset watchdog in SD init to prevent reboot
2017-01-12 06:13:56 -08:00
Scott Lahteine
e409c7f9e8
Merge pull request #5645 from esenapaj/From-microseconds-to-milliseconds
...
From "microseconds" to "milliseconds"
2017-01-12 06:02:55 -08:00
emartinez167
020c6af7b0
Updates to Spanish language
...
Add missing Spanish language definitions.
2017-01-12 05:53:39 -08:00
Hans Raaf
d29cc8f7bc
Reset watchdog in SD init to prevent reboot
...
If the watchdog is enabled and bootscreen + SD card checks take too long, Marlin may hang at boot time because of the reset loop. We have this happen all the time with the Anet board if no SD card is inserted.
2017-01-12 05:33:38 -08:00
Scott Lahteine
7743849608
Merge pull request #5680 from thinkyhead/rc_configs_puhlease
...
code_value_float tweak
2017-01-12 05:22:47 -08:00
Scott Lahteine
16357fbfdf
Merge pull request #5619 from Ocarthon/RCBugFix
...
Disable SD Detect for K8400
2017-01-12 05:22:03 -08:00
Scott Lahteine
e57c0fce66
Move MOSFET changes above #include for RIGIDBOARD
...
Correction to #5629
2017-01-12 04:46:49 -08:00
Scott Lahteine
c376f6a2cb
code_value_float tweak
2017-01-12 04:38:09 -08:00
Scott Lahteine
fb3c30e24c
Fix lcd_wait_for_homing causing menu to block
...
As a showcase function for how to do waiting in the lcd menu, this function should be preserved.
2017-01-12 04:37:23 -08:00
Scott Lahteine
f8ae0fd29f
Merge pull request #5647 from manianac/RCBugFix-PrepareMenuFix
...
Fix empty Prepare menu
2017-01-12 04:20:18 -08:00
Robert Kirk
aab5118c6a
Remove error causing break command
...
Use index macro instead of e
2017-01-01 17:47:01 -05:00
esenapaj
d38e335272
From "microseconds" to "milliseconds"
...
delay() is milliseconds
2017-01-02 01:19:33 +09:00
Philip Standt
8ae2bc7e2e
Disable SD Detect for K8400
2016-12-28 23:21:18 +01:00
Scott Lahteine
4061fca1ad
Sanity checks for FILAMENT_CHANGE_FEATURE and FILAMENT_RUNOUT_SCRIPT
2016-12-23 19:55:12 -08:00
Scott Lahteine
5ab7b91615
Comment on filament runout sensor config
2016-12-23 19:50:27 -08:00
Scott Lahteine
922c67f17d
Merge pull request #5588 from thinkyhead/rc_remove_biv25
...
Drop biv2.5 delta configurations
2016-12-23 19:14:50 -08:00
Scott Lahteine
8c6c048551
drop biv2.5 delta configurations
2016-12-23 18:56:07 -08:00
Scott Lahteine
92dbeebf40
Define ADV_NEVER, ADV_RATE
2016-12-23 18:43:23 -08:00
Robert Kirk
306c184b1a
Allow M600 when dryrun debugging
2016-12-21 20:30:51 -05:00
Scott Lahteine
fe2ea2906f
Merge pull request #5573 from thinkyhead/rc_unify_stepper_isr
...
LIN_ADVANCE with unified stepper ISR
2016-12-21 02:53:32 -08:00
Sebastianv650
84c685f8b5
First draft of Unified Stepper / E Advance ISR
2016-12-21 01:34:39 -08:00
Scott Lahteine
83021d82c6
Merge pull request #5502 from AnHardt/symbol-strings
...
Add symbol-strings
2016-12-21 00:51:59 -08:00
Scott Lahteine
036eccfd6e
Merge pull request #5572 from Kaibob2/patch-5
...
Update language_de.h
2016-12-21 00:50:40 -08:00
Scott Lahteine
b794b76836
Merge pull request #5567 from AnHardt/fix5194
...
Fix 5194
2016-12-21 00:49:52 -08:00
Scott Lahteine
451ba5df01
Merge pull request #5516 from esenapaj/Suppress-warning
...
Suppress warning
2016-12-21 00:00:35 -08:00
Scott Lahteine
92dbc63949
Merge pull request #5571 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
2016-12-20 23:59:55 -08:00
Kai
ade72535c4
Update language_de.h
...
Added tarnslation for
```
#define MSG_DEBUG_MENU
#define MSG_PROGRESS_BAR_TEST
```
2016-12-21 08:57:39 +01:00
esenapaj
ab6b005867
Suppress warning
2016-12-21 09:13:03 +09:00
AnHardt
61f15ef7e7
Fix 5194
...
I have been a bit too radical in cleaning up this section.
2016-12-21 00:45:29 +01:00
esenapaj
60515ff700
Update Japanese translation
...
・Add new translation
2016-12-21 08:44:07 +09:00
Scott Lahteine
1e419655f3
Followup to #5550 - spacing before "mm"
2016-12-20 02:27:54 -08:00
Scott Lahteine
1a26ce1cdc
Merge pull request #5550 from FHeilmann/patch-2
...
Allow negative retract values in the LCD
2016-12-20 02:10:22 -08:00
Scott Lahteine
bec30c89e7
Merge pull request #5522 from esenapaj/Add-description-for-dual-x
...
Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE
2016-12-20 01:31:53 -08:00
Scott Lahteine
7739c0affa
Change "+mm" to "mm" in most languages
...
- Japanese and Chinese still need update
2016-12-20 01:16:51 -08:00
Scott Lahteine
1cba425308
Allow negative recover-swap length from LCD
2016-12-20 01:16:08 -08:00
Scott Lahteine
298a8c6a3c
Merge pull request #5561 from thinkyhead/rc_no_case_light
...
Support for M335 case light "no case light"
2016-12-20 01:06:59 -08:00
Scott Lahteine
644f45cbd8
Merge pull request #5563 from akaJes/m600
...
FILAMENT_CHANGE_FEATURE allowed in idle mode
2016-12-20 01:06:10 -08:00
Scott Lahteine
0d2fc13516
Place "Level Bed" closer to "Auto Home"
2016-12-20 00:51:03 -08:00
Scott Lahteine
b031d28ebf
Encoder events should not skip stripes
2016-12-20 00:21:51 -08:00
Scott Lahteine
22881f38b9
Fix updating of "bool" menu items
2016-12-20 00:21:51 -08:00
Scott Lahteine
eb68715b94
No "Cooldown" menu if heaters are off
2016-12-20 00:21:51 -08:00
Jesus
4ed976b5ff
m600 fixes
2016-12-20 09:47:46 +02:00
Damien
4e2639942b
Support for M335 case light "no case light"
2016-12-19 23:23:08 -08:00
Scott Lahteine
18ba31e9b5
Add Debug Menu with LCD_PROGRESS_BAR_TEST as an example
2016-12-19 22:57:14 -08:00
Scott Lahteine
03af5961b0
Hide (or remove) custom character change on boot screen
2016-12-19 22:27:28 -08:00
Scott Lahteine
1642f5ed31
Add macro to some en strings
2016-12-19 22:27:28 -08:00
Scott Lahteine
dbb2d56c89
Correct comment on watchdog timer
2016-12-19 22:27:28 -08:00
Scott Lahteine
41a30923f3
Merge pull request #5559 from thinkyhead/rc_minimum_gcc_version
...
Throw an error for gcc before 4.7
2016-12-19 19:50:44 -08:00
Scott Lahteine
6d6a1db6ec
Apply const to _EEPROM_writeData value param
2016-12-19 18:50:43 -08:00
Robert Kirk
f724ef5820
Have bed leveling status output current status, not requested.
2016-12-19 18:47:45 -08:00
Scott Lahteine
20218e553d
Merge pull request #5527 from MagoKimbra/rc_configuration_store_fix_size
...
Fix size
2016-12-19 18:47:28 -08:00
Scott Lahteine
dcfbe2bd3c
Throw an error for gcc before 4.7
2016-12-19 18:30:51 -08:00
Scott Lahteine
82fde7df2e
Merge pull request #5512 from AnHardt/speed-compare-bbr
...
Optimize handling of block_buffer_runtime()
2016-12-19 18:21:06 -08:00
Scott Lahteine
8986225752
Spacing, cleanup in speed_lookuptable.h
2016-12-19 14:52:45 -08:00
Scott Lahteine
e12c8e5cac
Split up thermistor tables
2016-12-19 14:47:54 -08:00
Florian Heilmann
a7334fd2a0
Allow negative retract values in the LCD
...
This can already be done via G-Code, so adding the capability to the LCD should be straight forward.
2016-12-19 14:19:06 +01:00
AnHardt
292eb365c6
Optimize handling of block_buffer_runtime()
...
millis_t is long - divisions take for ever.
Return a kind of millisecond instead of microsecond -
divided by 1024 instead of 1000 for speed. (2.4% error)
That does not matter because block_buffer_runtime is
already a too short estimation.
Shrink the return-type.
2016-12-19 11:47:28 +01:00
esenapaj
6854f44bf2
Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE
2016-12-19 02:21:10 +09:00
Scott Lahteine
3f6f036f7c
Merge pull request #5524 from thinkyhead/rc_optional_dogm_splitup
...
Report EEPROM data size, not final index
2016-12-16 18:55:48 -08:00
MagoKimbra
86ba7e4542
Fix size
...
Fix size for writeData and readData.
For bilinear grid 11 x 11 for example, size is 4 (float) x 11 x 11 = 484. uint8_t max is 255.
2016-12-16 14:49:33 +01:00
Scott Lahteine
f9f75c8016
Fix USE_RAW_KINEMATICS in prepare_kinematic_move_to
2016-12-15 23:15:38 -08:00
Scott Lahteine
87921f390a
Clarify what are "logical" positions in the planner
2016-12-15 23:15:38 -08:00
Scott Lahteine
a4f10f59c3
Write the E parameter length correctly
2016-12-15 23:15:38 -08:00
Scott Lahteine
2e904cb4f9
Merge pull request #5514 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
2016-12-15 21:38:40 -08:00
Scott Lahteine
0b6817e0f9
Merge pull request #5505 from android444/patch-4
...
Update for translations language_pl.h
2016-12-15 21:38:18 -08:00
Scott Lahteine
3bd76f60e4
Report EEPROM data size, not final index
2016-12-15 20:26:28 -08:00
Scott Lahteine
78d6d6e076
Merge pull request #5452 from thinkyhead/rc_save_your_mesh
...
Save Bed Leveling to EEPROM
2016-12-15 20:23:01 -08:00
Scott Lahteine
0d0aa6c20d
Patch type for max_acceleration_mm_per_s2 save/restore
2016-12-15 20:05:42 -08:00
Scott Lahteine
d4f5418802
Merge pull request #5517 from esenapaj/Fix-for-PR-#5255
...
Fix for the PR #5255 (Case light menu (3rd attempt))
2016-12-15 20:01:22 -08:00
Scott Lahteine
fa7010b0a1
Merge pull request #5515 from esenapaj/Remove-unnecessary-tabs-and-spaces
...
Remove unnecessary tabs and spaces
2016-12-15 19:58:32 -08:00
Scott Lahteine
6d7b1cdf6c
Add M421 for ABL Bilinear
2016-12-15 19:39:11 -08:00
Scott Lahteine
32e65dc429
Extend M420 to print state and, with V, the matrix / mesh
2016-12-15 19:39:11 -08:00
Scott Lahteine
d04258753b
Don't throw away the bed level matrix on G28
2016-12-15 19:21:18 -08:00
Scott Lahteine
8f0f225d10
Save ABL Planar Matrix to EEPROM
2016-12-15 19:21:15 -08:00
Scott Lahteine
e2429a9da1
Generalize Bed Leveling flag in EEPROM
2016-12-15 19:20:52 -08:00
Scott Lahteine
e42fd7813a
Save ABL Bilinear Grid to EEPROM
2016-12-15 19:20:48 -08:00
Scott Lahteine
492b68f8e3
Better EEPROM read/write error handling
2016-12-15 19:08:44 -08:00
Scott Lahteine
55722c09da
Use "UNPROBED" for un-probed bed_level_grid points
2016-12-15 19:08:44 -08:00
Scott Lahteine
2643404ac8
Throw an error in M420 if can't enable
2016-12-15 19:08:43 -08:00
Scott Lahteine
b1539394fd
Use planner.unapply_leveling to undo tilt in G29
2016-12-15 19:08:43 -08:00
Scott Lahteine
04636f78eb
Re-enable MBL/ABL after M48
2016-12-15 19:08:43 -08:00
Scott Lahteine
9b41638672
Minor tweak to G29 grid points
2016-12-15 19:08:42 -08:00
Scott Lahteine
daa2cad21f
Fix comment on G29 to include 'Z'
2016-12-15 19:08:42 -08:00
Scott Lahteine
8244fefcc2
Tweak call to reset_bed_level in G29
2016-12-15 19:08:42 -08:00
Scott Lahteine
0995a5d734
Fixup reset_bed_level
2016-12-15 19:08:42 -08:00
Scott Lahteine
1b2fb2bdc7
ABL_GRID_POINTS_* => ABL_GRID_MAX_POINTS_*
2016-12-15 19:08:41 -08:00
esenapaj
d486361c69
Fix for commented section of Config_RetrieveSettings()
2016-12-16 04:34:47 +09:00
esenapaj
88157ba529
Fix for the PR #5255 (Case light menu (3rd attempt))
2016-12-16 00:57:32 +09:00
esenapaj
069c6b38dd
Remove unnecessary tabs and spaces
2016-12-16 00:21:32 +09:00
esenapaj
9c8116aedf
Update Japanese translation
...
・Add new translation
2016-12-16 00:06:58 +09:00
AnHardt
57b1275cde
Add symbol-string to _de
...
Add symbol-string for _de
to reduce the frquencey of regenerating 'mappers' and 'fonts'
with the new utf-system.
2016-12-15 14:37:18 +01:00
android444
3363d2c937
Update for translations language_pl.h
2016-12-14 17:32:33 +01:00
Scott Lahteine
06af3b62ba
Move HOLLOW_FRAME options to config_adv
2016-12-14 04:31:27 -08:00
Scott Lahteine
67ca6c7bfe
Codestyle tweaks to ultralcd.cpp
2016-12-14 04:20:33 -08:00
Scott Lahteine
8d9fcd8e6f
Merge pull request #5495 from AnHardt/autoadjusting_display-updates
...
Adaptive screen updates for all kinds of displays
2016-12-14 04:16:26 -08:00
Scott Lahteine
77a360912d
Merge pull request #5491 from yhfudev/devel-rcbugfix-language-headers
...
UTF-8 language header files
2016-12-14 02:23:09 -08:00
AnHardt
d0e24e0876
Adaptive screen updates for all kinds of displays
...
The target here is to update the screens of graphical and char base
displays as fast as possible, without draining the planner buffer too much.
For that measure the time it takes to draw and transfer one
(partial) screen to the display. Build a max. value from that.
Because ther can be large differences, depending on how much the display
updates are interrupted, the max value is decreased by one ms/s. This way
it can shrink again.
On the other side we keep track on how much time it takes to empty the
planner buffer.
Now we draw the next (partial) display update only then, when we do not
drain the planner buffer to much. We draw only when the time in the
buffer is two times larger than a update takes, or the buffer is empty anyway.
When we have begun to draw a screen we do not wait until the next 100ms
time slot comes. We draw the next partial screen as fast as possible, but
give the system a chance to refill the buffers a bit.
When we see, during drawing a screen, the screen contend has changed,
we stop the current draw and begin to draw the new content from the top.
2016-12-13 18:44:34 +01:00
yhfudev
2dbd38ce16
tag the utf-8 strings
2016-12-13 11:54:35 -05:00
Scott Lahteine
94ffb58da7
Prevent retract un-hop at wrong height
2016-12-13 08:24:12 -08:00
Scott Lahteine
0772c8e55f
Merge pull request #5487 from thinkyhead/rc_easier_move_axis
...
Rearrange Move Menu, Fix up Delta Calibration
2016-12-13 07:07:05 -08:00
Scott Lahteine
b2c8de856b
Merge pull request #5478 from AnHardt/stepspermm
...
Replace ftostr62sign with ftostr62rj
2016-12-13 07:05:42 -08:00
Scott Lahteine
1fd8185d37
Merge pull request #5492 from thinkyhead/rc_fix_language_es
...
Fix multiple definitions of message macros in the language-es.h
2016-12-13 06:57:52 -08:00
yhfudev
1cdffdede7
fix multiple definitions of message macros in the language-es.h
2016-12-13 06:48:38 -08:00
Scott Lahteine
b67f8cb499
Merge pull request #5490 from jbrazio/update-bqhp2
...
Update the bq Hephestos 2 example configuration
2016-12-13 05:04:24 -08:00
Scott Lahteine
93b2833347
Move Menu: Select axis first, resolution after
2016-12-13 03:11:14 -08:00
Scott Lahteine
48aa0f6475
Merge pull request #5475 from AnHardt/utf-mapper-tr
...
utf8-mapper for Turkish
2016-12-13 03:03:22 -08:00
Scott Lahteine
b9ee0d7bd3
Merge pull request #5488 from thinkyhead/rc_fade_compiler_warn
...
Patch fade_factor compiler warning
2016-12-13 03:00:47 -08:00
Scott Lahteine
641e0936d4
Patch up Delta Calibration Menu
2016-12-13 02:42:28 -08:00
Scott Lahteine
b4dbf4d18a
Non-reentrant "Moving..." screen to safely wait in LCD
2016-12-13 02:42:27 -08:00
Scott Lahteine
7b625e0048
Patch fade_factor compiler warning
2016-12-13 02:29:01 -08:00
Scott Lahteine
6fa8fd15e2
Add negative temperatures for Thermistor 1
...
Changes from #5485 by @AndKe
2016-12-13 02:06:16 -08:00
Scott Lahteine
2b5d424394
Use handle_reprapworld_keypad for keypad handling
2016-12-13 01:41:08 -08:00
Scott Lahteine
887ed73c9b
Expose delta_clip_start_height for use by others
2016-12-13 01:41:08 -08:00
João Brázio
3f75edb1d6
Updated bq Hephestos 2 example configuration
2016-12-13 09:26:07 +00:00
Daniel Martinez
b796e7031d
Update Aragonese translation
2016-12-12 17:36:33 -08:00
AnHardt
cd2b74e88d
Replace ftostr62sign with ftostr62rj
...
`ftostr62sign()` is used only when displaing/editing
Steps/mm. A sign is not needed - the value is always positive.
Because the number part is long there is no't much place for the values name.
With this PR the is one more char for the name possible.
2016-12-12 20:25:20 +01:00
AnHardt
795541f87e
utf8-mapper for Turkish
...
The non utf8 version of turkish is a bit unhandy.
Delete `language_tr.h`
Rename `language_tr_utf.h` to `language_tr.h`
Provide a propper utf8-mapper for Turkish and use it.
2016-12-12 15:56:59 +01:00
Scott Lahteine
7c71bb2900
Merge pull request #5471 from thinkyhead/rc_planner_report_m503
...
Patch to show E factors in M503
2016-12-11 17:47:41 -08:00
Scott Lahteine
39401b7472
Patch to show E factors in M503
2016-12-11 17:37:29 -08:00
Scott Lahteine
6b50230022
Merge pull request #5447 from thinkyhead/rc_update_dutch
...
Dutch cleanup, ordering, placeholders
2016-12-10 22:13:20 -08:00
Scott Lahteine
2c97c11731
Merge pull request #5454 from thinkyhead/rc_fix_delta_g29
...
Fix G29 starting height on DELTA
2016-12-10 22:10:33 -08:00
Scott Lahteine
8239c45b30
Merge pull request #5448 from thinkyhead/rc_eeprom_bump
...
EEPROM: Prolong life. Better support for `DISTINCT_E_FACTORS`.
2016-12-10 22:06:00 -08:00
Scott Lahteine
21ed43df5f
New Dutch terms
2016-12-10 21:59:45 -08:00
Scott Lahteine
4bc6536f54
Move to safe zone on DELTA if using do_blocking_move_to*
2016-12-10 21:28:24 -08:00
Scott Lahteine
6f389158d7
Compile less code with EEPROM off
2016-12-09 06:05:32 -08:00
Scott Lahteine
f2301a2a04
Add e-stepper count to EEPROM (for planner vars)
2016-12-09 06:05:31 -08:00
Scott Lahteine
53c9fca0f6
Only write to EEPROM when a byte changes
2016-12-09 06:05:31 -08:00
AnHardt
13eebd11cf
volatile_block_buffer_runtime_us
...
`block_buffer_runtime_us` is mangled in the planner and in the stepper-ISR.
So it needs to be volatile and interrupt protected.
2016-12-09 14:49:02 +01:00
Scott Lahteine
8383f35b40
Merge pull request #5445 from thinkyhead/rc_reduce_jerk_code
...
Slightly shrink jerk and advance code
2016-12-09 02:54:03 -08:00
Gege2B
40453c1b9a
Update french translation (LIGHTS str)
2016-12-09 11:18:29 +01:00
Scott Lahteine
fc2fc828b3
Prettify LIN_ADVANCE code with the positive condition
2016-12-09 00:29:07 -08:00
Scott Lahteine
1929502e15
Add const to some variables
2016-12-09 00:29:06 -08:00
Scott Lahteine
2da4d22520
Pretty up ADVANCE code
2016-12-08 22:51:28 -08:00
Scott Lahteine
af024e1d7c
Pretty up coast / reverse jerk code
2016-12-08 22:50:25 -08:00
Scott Lahteine
3f3b5c86d8
Slightly shrink code for jerk-based reduction of safe_speed
2016-12-08 22:24:29 -08:00
AnHardt
87fe20b5f5
Simplify long_move()
...
We are not really interested in, if there are blocks.
All information we need is in `block_buffer_runtime_us`.
2016-12-09 00:13:35 +01:00
Scott Lahteine
574d9c7d3d
Merge pull request #5432 from Kaibob2/patch-2
...
Update language_de.h
2016-12-08 13:14:04 -08:00
Scott Lahteine
f089279263
Merge pull request #5431 from esenapaj/Suppress-warnings,-etc
...
Suppress warnings, etc
2016-12-08 13:10:12 -08:00
Scott Lahteine
d92ccb230c
Merge pull request #5438 from AnHardt/patch-long_move
...
Patch long_move()
2016-12-08 13:08:36 -08:00
AnHardt
706b240251
Patch long_move()
...
While the last move in the planner_buffer is running
it's duration is already subtracted from block_buffer_runtime_us.
2016-12-08 21:03:26 +01:00
esenapaj
a298a58684
Remove redundant "E"
2016-12-09 02:27:34 +09:00
Kai
390a6d976a
Update language_de.h
...
#define MSG_ENDSTOP_ABORT doesn't fit in Display
See https://github.com/MarlinFirmware/Marlin/issues/5401#issuecomment-265714487
2016-12-08 12:18:19 +01:00
esenapaj
e9393c3634
Suppress warnings, etc
...
・Suppress warnings
・Remove unused variable "did_update"
2016-12-08 17:47:59 +09:00
Scott Lahteine
da6a094424
Sanity-check inverting and pullups for Z probe and Z endstop
...
`Z_MIN_ENDSTOP_INVERTING` must match `Z_MIN_PROBE_ENDSTOP_INVERTING`
when using `Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN`.
This is easy to overlook.
2016-12-08 00:12:19 -08:00
Scott Lahteine
3fb43c11fc
Fix compile error with LCD_I2C_VIKI
2016-12-07 23:29:45 -06:00
Scott Lahteine
aa241c63b3
Include M205 note in configurations
2016-12-07 14:45:44 -06:00
Scott Lahteine
c8a95ec514
Merge pull request #5413 from MagoKimbra/rc_fix_mesh
...
Fix Mesh without Fade Height
2016-12-07 03:16:02 -06:00
Scott Lahteine
35ad9626f1
Merge pull request #5410 from thinkyhead/rc_polish_update
...
Update Polish language, reduce filament change messages
2016-12-07 03:15:53 -06:00
Scott Lahteine
01e5d46ea7
Patch some planner compile errors
2016-12-07 02:26:24 -06:00
MagoKimbra
5383212a28
Fix Mesh without Fade Height
2016-12-07 09:23:42 +01:00
Scott Lahteine
dbe1dc1452
Merge pull request #5406 from Rigid3D/RCBugFix
...
Turkish Translation Update
2016-12-07 00:56:08 -06:00
Scott Lahteine
4783a59249
Remove filament-change empty lines from languages
2016-12-07 00:53:03 -06:00
Scott Lahteine
1705099c3e
Save space by not defining unused filament change message lines
2016-12-07 00:53:03 -06:00
android444
9b1f4b514b
Update Polish language
...
Translation of messages in English to Polish.
2016-12-06 22:28:33 -06:00
Robert Marko
84f7e1de04
Updates to Croatian language
2016-12-06 22:24:12 -06:00
esenapaj
08cdaaf19b
README and Version for 1.1.0-RCBugFix
...
Sync with RC8
2016-12-07 10:43:58 +09:00
Mehmet Sutas
f4663cb677
Update language_tr_utf8.h
2016-12-07 00:21:56 +03:00
Mehmet Sutas
b4fd115d4e
Update language_tr.h
2016-12-07 00:20:07 +03:00
Scott Lahteine
83c5026db1
Ignore homing button when SD printing
...
As suggested in #5404 by @android444
2016-12-06 14:22:34 -06:00
Scott Lahteine
312caef472
Merge pull request #5398 from thinkyhead/rc_croatian_cleanup
...
Fix Croatian spacing, extra #endif
2016-12-06 03:22:19 -06:00
Scott Lahteine
46b65773ea
Fix Croatian spacing, extra #endif
2016-12-06 03:10:37 -06:00
Scott Lahteine
3f2faac9d1
Merge pull request #5388 from thinkyhead/rc_subdivide_bilinear
...
Subdivide Bilinear Grid with Catmull Rom Splines
2016-12-05 20:28:50 -06:00
Scott Lahteine
b5b5edd9ad
Merge pull request #5394 from thinkyhead/rc_drop_board_99
...
Remove mystery-board 99
2016-12-05 20:28:35 -06:00
Scott Lahteine
c48901f355
Remove mystery-board 99
2016-12-05 20:16:50 -06:00
akaJes
d7b948610a
Experimental bilinear subdivision option
2016-12-05 20:11:24 -06:00
Scott Lahteine
6253b765aa
Merge pull request #5389 from thinkyhead/distribute_screen_updates
...
Distribute GLCD screen updates in time
2016-12-05 20:08:33 -06:00
Scott Lahteine
b203901143
Merge pull request #5393 from AnHardt/Fix-auto_report_temperatures
...
Fix auto_report_temperatures()
2016-12-05 19:38:23 -06:00
AnHardt
59a27ed27d
Fix auto_report_temperatures()
...
The `auto_report_temperatures` needs a linefeed to be recognized by Repetier Host.
2016-12-06 01:26:44 +01:00
AnHardt
a6fbd4a5d8
Distribute GLCD screen updates in time
...
Currently we draw and send the screens for a graphical LCD all at once.
We draw in two or four parts but draw them directly behind each other.
For the tested status screen this takes 59-62ms in a single block.
During this time nothing else (except the interrupts) can be done.
When printing a sequence of very short moves the buffer drains - sometimes until it's empty.
This PR splits the screen update into parts.
Currently we have 10 time slots. During the first one the complete screen is drawn. (60,0,0,0,0,0,0,0,0,0,0)
Here i introduce pauses for doing other things. (30,30,0,0,0,0,0,0) or (15,15,15,15,0,0,0,0,0,0)
Drawing in consecutive time slots prevents from lagging too much. Even with a 4 stripe display all the drawing is done after 400ms.
Previous experiments with a even better distribution of the time slots like
(30,0,0,0,0,30,0,0,0,0) and (15,0,15,0,15,0,15,0,0,0) did not feel good when using the menu, because of too much lag.
Because of the previous PRs to speed up the display updates and especially reducing the difference between drawing 2 or 4 stripes,
it now makes sense for the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER to go from 2 to 4 stripes. This costs about 1-2ms per complete
screen update, but is payed back by having partial updates lasting only the half time and two additional brakes. Also ~256 byte of
framebuffer are saved in RAM.
13:45:59.213 : echo: #:17 >:13 s:30; #:16 >:13 s:29; S#:33 S>:26 S:59
13:46:00.213 : echo: #:16 >:14 s:30; #:17 >:13 s:30; S#:33 S>:27 S:60
13:46:01.215 : echo: #:17 >:13 s:30; #:16 >:13 s:29; S#:33 S>:26 S:59
13:46:02.215 : echo: #:16 >:13 s:29; #:16 >:14 s:30; S#:32 S>:27 S:59
13:46:03.214 : echo: #:17 >:13 s:30; #:17 >:13 s:30; S#:34 S>:26 S:60
13:46:04.214 : echo: #:16 >:13 s:29; #:16 >:14 s:30; S#:32 S>:27 S:59
13:46:05.212 : echo: #:16 >:14 s:30; #:17 >:13 s:30; S#:33 S>:27 S:60
13:46:06.212 : echo: #:17 >:13 s:30; #:16 >:13 s:29; S#:33 S>:26 S:59
03:30:36.779 : echo: #:8 >:7 s:15; #:10 >:7 s:17; #:8 >:6 s:14; #:8 >:7 s:15; S#:34 S>:27 S:61
03:30:37.778 : echo: #:8 >:6 s:14; #:10 >:7 s:17; #:9 >:7 s:16; #:8 >:6 s:14; S#:35 S>:26 S:61
03:30:38.778 : echo: #:8 >:6 s:14; #:11 >:7 s:18; #:8 >:6 s:14; #:8 >:7 s:15; S#:35 S>:26 S:61
03:30:39.777 : echo: #:8 >:6 s:14; #:10 >:7 s:17; #:8 >:8 s:16; #:8 >:6 s:14; S#:34 S>:27 S:61
03:30:40.780 : echo: #:8 >:6 s:14; #:11 >:7 s:18; #:8 >:6 s:14; #:8 >:6 s:14; S#:35 S>:25 S:60
03:30:41.780 : echo: #:9 >:6 s:15; #:10 >:7 s:17; #:8 >:6 s:14; #:9 >:6 s:15; S#:36 S>:25 S:61
03:30:42.779 : echo: #:8 >:6 s:14; #:10 >:8 s:18; #:8 >:6 s:14; #:8 >:6 s:14; S#:34 S>:26 S:60
03:30:43.778 : echo: #:9 >:6 s:15; #:10 >:7 s:17; #:8 >:7 s:15; #:9 >:6 s:15; S#:36 S>:26 S:62
#: draw a stripe
>: transfer a stripe
s: sum of of draw and transfer for one stripe
S#: sum of draws for a complete screen
S>: sum of transfers for a complete screen
S: time to draw and transfer a complete screen
2016-12-05 12:22:54 -06:00
Scott Lahteine
f882355994
Merge pull request #5318 from Sebastianv650/Account_for_LCD_improvements
...
Account for LCD improvements in ENSURE_SMOOTH_MOVES
2016-12-05 11:23:58 -06:00
Scott Lahteine
20e834461d
Merge pull request #5385 from thinkyhead/rc_ftostr4sign_decimal
...
Show decimal for small numbers in ftostr4sign
2016-12-05 11:22:45 -06:00
Scott Lahteine
b6b100c471
Merge pull request #5371 from thinkyhead/rc_extruders_can_differ
...
Allow distinct factors for multiple extruders
2016-12-05 11:22:31 -06:00
Scott Lahteine
449d9cbf60
Add placeholders for Polish translatable strings
2016-12-05 10:37:00 -06:00
c64pl
643dc4b64e
Update language_pl.h
...
Fixed translations
2016-12-05 10:37:00 -06:00
Scott Lahteine
0974b75fb6
Merge pull request #5386 from thinkyhead/rc_galician_update
...
Galician language update.
2016-12-05 10:36:26 -06:00
Rafa Couto
2b9115330d
Galician language update.
2016-12-05 10:11:28 -06:00
Scott Lahteine
1f3e2440bc
Merge pull request #5175 from thinkyhead/rc_dualx_homing
...
Unpark when using Z_SAFE_HOMING with Dual X
2016-12-05 10:02:56 -06:00
Scott Lahteine
d5bf1684fe
Implement as optional feature LCD_DECIMAL_SMALL_XY
...
And reduce the function size to simplify
2016-12-05 09:26:05 -06:00
Guthenberg
bfb8d3b53e
Show more decimals in Display, if possible
...
_123, -123, _-12, __-1 plus 1234, 12.3, -1.2
2016-12-05 09:05:46 -06:00
Scott Lahteine
1e30d1da47
Simplify itostr4sign
...
- This function becomes obsolete if ftostr4sign is re-written.
2016-12-05 09:05:46 -06:00
Scott Lahteine
82a187acae
Merge pull request #5359 from AnHardt/update-de
...
Add missing translations to lang-de
2016-12-05 07:31:28 -06:00
Scott Lahteine
4bafdf4b66
Support DISTINCT_E_FACTORS in LCD Motion Menu
2016-12-05 07:26:18 -06:00
Scott Lahteine
3391c785c6
Support for distinct E factors
2016-12-05 07:26:18 -06:00
Scott Lahteine
0dfe95eaba
Adjust formatting in Planner
2016-12-05 07:26:17 -06:00
Scott Lahteine
09587f7c0d
Fix rows error in DOGM
2016-12-05 07:14:11 -06:00
Scott Lahteine
c47e07d129
Fix Dual X software endstops
2016-12-05 06:51:41 -06:00
Scott Lahteine
4217e9653e
Adjust park code in tool_change
2016-12-05 06:51:41 -06:00
Scott Lahteine
b20405db31
Only DXC_AUTO_PARK_MODE should auto-move in tool_change
2016-12-05 06:48:43 -06:00
Scott Lahteine
ca24af7d5d
Dual X with home_z_safely is not parked
2016-12-05 06:43:26 -06:00
Scott Lahteine
0e15b4f434
Dual X set_axis_is_at_home can use x_home_pos for both
2016-12-05 06:43:26 -06:00
Scott Lahteine
54109dfaec
Reduce code size for Dual X un-park
2016-12-05 06:43:26 -06:00
Scott Lahteine
fe96f74db1
Use const arguments in Dual X helper functions
2016-12-05 06:43:26 -06:00
Scott Lahteine
41278c1e8b
Apply LOGICAL_POSITION to home positions on Dual X
2016-12-05 06:43:26 -06:00
Scott Lahteine
053fb55af6
Fix modes ordering in prepare_move_to_destination_dualx
2016-12-05 06:43:26 -06:00
Scott Lahteine
ee50928eee
Make LOGICAL and RAW position macros ternary-compatible
2016-12-05 06:43:26 -06:00
Scott Lahteine
56dd15c0ad
Use SET_INPUT for PS_ON_PIN in kill
2016-12-05 06:43:26 -06:00
Scott Lahteine
200cf3e9f9
Merge pull request #5381 from thinkyhead/rc_fix_fade_factor
...
Properly apply fade_factor to MBL
2016-12-05 06:06:13 -06:00
Scott Lahteine
84ff78c1e3
Pass the fade factor to mbl.get_z
2016-12-05 03:01:51 -06:00
Scott Lahteine
85c2b96685
Apply const to MBL class methods
2016-12-05 02:50:59 -06:00
Scott Lahteine
c06161b773
Use apply_leveling, not MBL directly
2016-12-05 01:53:36 -06:00
Scott Lahteine
818f8b93d3
Merge pull request #5378 from thinkyhead/rc_duration_rj
...
Better alignment of elapsed print time
2016-12-04 22:42:23 -06:00
Scott Lahteine
9d88a61d52
Better alignment of elapsed print time
2016-12-04 21:30:49 -06:00
Scott Lahteine
0b53d78046
Tweak editable items for debugging
2016-12-04 03:51:10 -06:00
Scott Lahteine
fccc97de6d
Save PROGMEM with string changes
...
Unlike RAM-based strings, PROGMEM strings aren’t consolidated by the
compiler.
2016-12-03 19:21:46 -06:00
AnHardt
e7fc353f08
Add missing translations to lang-de
2016-12-03 20:51:49 +01:00
Scott Lahteine
3f2cb376e0
Add placeholders for Bulgarian translation
2016-12-03 12:14:02 -06:00
Scott Lahteine
b22d37ba52
Merge pull request #5364 from thinkyhead/rc_croatian_update
...
Update Croatian to include missing strings
2016-12-03 11:37:42 -06:00
Robert Marko
b796a687ca
Update Croatian to include missing strings
...
Added all missing strings according to English
2016-12-03 11:15:41 -06:00
Scott Lahteine
255ed80164
Fix hotend offset report in M503
2016-12-03 10:17:35 -06:00
Petr Zahradník
c66f3ed34b
Update Czech
2016-12-03 10:32:34 +01:00
Scott Lahteine
cbf208ea1f
Merge pull request #5348 from Kaibob2/patch-1
...
Update language_de.h
2016-12-03 01:53:24 -06:00
Scott Lahteine
a2660cf688
Merge pull request #5347 from tnw513/fix-italian
...
Added missing translations
2016-12-03 01:52:45 -06:00
Scott Lahteine
27dd5acc22
Fix set_led_color for BLINKM
...
Follow-up to #5330
2016-12-03 01:51:11 -06:00
Kai
8530c32309
Update language_de.h
...
Grammar corrections
2016-12-02 19:40:36 +01:00
Silvio Didonna
f1d5ffa211
Added missing translations
2016-12-02 18:49:39 +01:00
Scott Lahteine
b0361ebe4f
Merge pull request #5343 from thinkyhead/rc_invert_case_light
...
Allow case light pin to be active low
2016-12-02 01:17:11 -06:00
Scott Lahteine
f60b4f8659
Allow case light pin to be active low
2016-12-01 23:32:34 -06:00
Scott Lahteine
3f4c02e42f
Merge pull request #5259 from Sebastianv650/Allow_UART-ISR_inside_Stepper
...
Allow UART ISRs inside the stepper ISR
2016-12-01 23:17:42 -06:00
Scott Lahteine
d07229f185
Fix redraw in SD Card menus
2016-12-01 18:15:58 -06:00
Scott Lahteine
47b4b21308
Merge pull request #5331 from esenapaj/Fix-for-the-PR-#5072
...
Fix for the PR #5072 (Add predefined AUTO_FAN_PINs to pins files), etc
2016-12-01 13:37:02 -06:00
Scott Lahteine
8d14420331
Fix compile without ENABLE_LEVELING_FADE_HEIGHT
2016-12-01 11:37:24 -06:00
Scott Lahteine
415294801f
Merge pull request #5330 from thinkyhead/rc_rgb_led
...
Support for an RGB LED using 3 pins
2016-11-30 14:14:00 -06:00
esenapaj
0909cf3d46
Adjust spacing
2016-11-30 19:39:39 +09:00
esenapaj
8e9e9c17b0
Follow-up the PR #5323 (Adding ukrainian language support)
...
・Update forgotten Configuration_adv.h of Felix\DUAL and K8400\Dual-head
2016-11-30 19:39:39 +09:00
esenapaj
d92ce8849b
Fix for the PR #5072 (Add predefined AUTO_FAN_PINs to pins files), etc
...
・Make descriptions the same as others
2016-11-30 19:39:38 +09:00
Scott Lahteine
e00b380489
Merge pull request #5323 from akaJes/lang-ua
...
Adding ukrainian language support
2016-11-30 01:10:40 -06:00
Scott Lahteine
65c50e062e
Support for an RGB LED using 3 pins
2016-11-30 00:02:31 -06:00
esenapaj
3047f3c85c
Suppress warning
2016-11-30 00:32:56 +09:00
jes
f674246397
extend Configurations files
2016-11-29 15:04:36 +02:00
jes
c90191faaf
adding ukrainian laguage support
2016-11-29 14:49:45 +02:00
Sebastianv650
912704a0d8
Enable ISRs inside temperature ISR
...
to capture chars at UART at 250000 baud.
2016-11-28 20:08:50 +01:00
Sebastianv650
f62f4006af
Account for LCD improvements in ENSURE_SMOOTH_MOVES
...
.. and give the hint to try lower values if possible.
2016-11-28 17:44:19 +01:00
Scott Lahteine
092e949b58
Merge pull request #5169 from thinkyhead/rc_core_inverted
...
Support for COREYX, COREZX, COREZY
2016-11-28 02:26:41 -06:00
Scott Lahteine
e9e4208ff1
Merge pull request #5274 from Sebastianv650/improve_smooth_moves
...
Improvement for ENSURE_SMOOTH_MOVES
2016-11-28 02:22:08 -06:00
Scott Lahteine
c7935bb0d2
Merge pull request #5299 from thinkyhead/rc_bed_correction_fade
...
Add a fade factor for mesh leveling
2016-11-28 02:07:51 -06:00
Scott Lahteine
a69b1ee691
Merge pull request #5313 from thinkyhead/rc_fix_menu_actions
...
Keep drawing menu unless screen changes
2016-11-28 02:01:39 -06:00
Scott Lahteine
32ee3acf86
Merge pull request #5315 from thinkyhead/rc_fixup_material_menus
...
Refine material heatup menu items
2016-11-28 01:46:51 -06:00
Scott Lahteine
c70a06daf1
lcd_save_previous_menu => lcd_save_previous_screen
2016-11-28 01:46:18 -06:00
Scott Lahteine
13ea43cc8d
Only exit menu handler when the screen changes
2016-11-28 01:46:18 -06:00
Scott Lahteine
f45b6a7762
Merge pull request #5314 from thinkyhead/case_light_menu_fix
...
Fix and optimize case-light code
2016-11-28 01:45:27 -06:00
Scott Lahteine
59fafb93b2
Merge pull request #5304 from AnHardt/pixel-shifting
...
MENU_HOLLOW_FRAME for the menu screens
2016-11-28 01:41:47 -06:00
Scott Lahteine
0951d385ce
Don't set heater temperature above its maximum
2016-11-28 01:37:24 -06:00
Scott Lahteine
c9193e856d
Limit preheat parameters based on all nozzles
2016-11-28 01:37:24 -06:00
Scott Lahteine
bb4529f7d2
PLA / ABS => Material 1 / 2
2016-11-28 01:37:24 -06:00
Scott Lahteine
61437d988a
Fix and optimize case-light code
2016-11-28 01:34:52 -06:00
AnHardt
7a9fa78822
MENU_HOLLOW_FRAME for the menu screens
...
MENU_HOLLOW_FRAME for the menu screens and
some pixel shifting to optimize the look with tall fonts. (cn)
2016-11-27 22:59:05 +01:00
AnHardt
24ca1a6289
Not more then 4 stripes for u8g-devices
...
To optimise speed.
Costs well invested 128Byte of RAM.
2016-11-26 19:08:33 +01:00
Scott Lahteine
aee71c543e
Minor formatting in language.h
2016-11-26 06:53:52 -06:00
Scott Lahteine
05d8d189f6
Adjust spacing in utf_mapper.h
2016-11-26 06:53:52 -06:00
Scott Lahteine
5460a529da
Add option DOGM_SPI_DELAY_US
2016-11-26 06:53:52 -06:00
Scott Lahteine
71842b6a17
Apply const to LCD arguments and locals
2016-11-26 06:53:52 -06:00
Scott Lahteine
b1abd7edef
Optimize graphical display with selective rendering
2016-11-26 06:53:52 -06:00
AnHardt
b91fab2d7d
Fix USE_BIG_EDIT_FONT
2016-11-26 13:50:25 +01:00
Scott Lahteine
4cd73e183d
Hide hidden files and folders
2016-11-26 06:26:28 -06:00
Scott Lahteine
f6f77d34a1
Add a fade factor for mesh leveling
2016-11-26 03:41:26 -06:00
AnHardt
75fdcc14b7
Activate font and mapper for el-gr
2016-11-26 02:30:37 +01:00
AnHardt
a0004e7cd3
Change font decent to -1 for tt and gr
...
For speeding up font drawing unify font decent.
Tr and Gr have ben the only fonts with a font decent of -2.
Sorry for some, a bit compressd, but hopefully still readeble symbols.
2016-11-26 02:29:23 +01:00
Scott Lahteine
307f263f89
Merge pull request #5292 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
2016-11-25 16:56:49 -06:00
esenapaj
7070143042
Update Japanese translation
...
・Add new translation
2016-11-24 21:10:40 +09:00
esenapaj
ef97645002
Follow-up the PR #5255 (Case light menu (3rd attempt))
2016-11-24 19:42:05 +09:00
Scott Lahteine
2a9b3376a9
Merge pull request #5289 from thinkyhead/rc_which_menu_actions
...
Drop "static" keyword in ultralcd.cpp function declarations
2016-11-23 23:04:05 -06:00
Scott Lahteine
b97dafe4b8
Drop "static" keyword in ultralcd.cpp function declarations
2016-11-23 20:43:01 -06:00
Scott Lahteine
2e966f8e5b
Patch Capabilities Report for "PROGRESS"
2016-11-23 19:31:46 -06:00
Scott Lahteine
f60321d3e3
Merge pull request #5284 from thinkyhead/rc_turkish_update
...
Turkish update (squashed)
2016-11-23 14:57:52 -06:00
Mehmet Sutas
a26668b10c
Add UTF8 Turkish Translation
2016-11-23 14:19:16 -06:00
Mehmet Sutas
61aa796307
Added Human Readable Comments
2016-11-23 14:19:16 -06:00
Mehmet Sutas
6fb9c6fe07
Follow-up for #5167 Turkish Language
...
Add check for Turkish Font before setting better font for graphic displays
2016-11-23 14:19:15 -06:00
Scott Lahteine
d891324830
Merge pull request #5258 from mosh1/mbl_speed_fix
...
Fix z feedrate value when doing mesh bed leveling. probe feedrate use…
2016-11-23 14:15:01 -06:00
Scott Lahteine
7f8133a51f
Merge pull request #5255 from Kaibob2/CaseLightMenu
...
Case light menu (3rd attempt)
2016-11-23 13:46:33 -06:00
Kai
e9b42f4f47
Update language_de.h
2016-11-23 19:29:19 +01:00
Kai
0c341f0c50
Added Menu entry for Case light
2016-11-23 19:29:15 +01:00
Scott Lahteine
3bc2273ac9
Comment M540
2016-11-21 18:08:00 -06:00
Scott Lahteine
14b74181f5
Merge pull request #5179 from thinkyhead/rc_TMC2130
...
TMC2130 "Silent StepStick" support
2016-11-21 14:10:52 -06:00
Scott Lahteine
bb2114a060
Merge pull request #5264 from thinkyhead/rc_delta_safe_zone
...
Add an option for delta to home to the top
2016-11-21 13:56:44 -06:00
Scott Lahteine
38466b1d2f
Merge pull request #5271 from esenapaj/Fix-for-the-PR-#5267
...
Fix for thePR #5267 (Introduce a +1234.56 format for over 999 steps/mm)
2016-11-21 13:55:56 -06:00
Scott Lahteine
9b96a4a53b
Merge pull request #5246 from thinkyhead/rc_some_cleanup
...
Minor stepper cleanup
2016-11-21 13:55:25 -06:00
Sebastianv650
8190483eeb
Improvement for ENSURE_SMOOTH_MOVES
...
Instead of waiting for a single long block, compare the complete block
buffer runtime for the long_move() check.
2016-11-21 17:58:24 +01:00
esenapaj
da67037550
Fix for thePR #5267 (Introduce a +1234.56 format for over 999 steps/mm)
...
・Fix memory leak
2016-11-21 22:31:01 +09:00
Scott Lahteine
0f891e848b
Merge pull request #5268 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
2016-11-21 03:18:36 -06:00
esenapaj
190a04c467
Update Japanese translation
...
・Change translation for 16 width LCD
2016-11-21 17:51:43 +09:00
esenapaj
7b836a4000
Introduce a +1234.56 format for over 999 steps/mm
2016-11-21 17:45:07 +09:00
Scott Lahteine
3e0376b45e
Reorder M114 and M119 gcode cases
2016-11-21 00:52:19 -06:00
Scott Lahteine
644fac5d34
Reduce all stepper_indirection init code with macros
2016-11-21 00:52:18 -06:00
Scott Lahteine
4e4f37b6c2
Code formatting for TMC and L6470 config options
2016-11-21 00:52:18 -06:00
Scott Lahteine
127e21ae00
Extend M122 for all steppers
2016-11-21 00:52:18 -06:00
Scott Lahteine
bf5f5f44cc
Make TMC2130 init code auto-configure
...
Simply apply enabled settings instead of requiring users to edit
stepper_indirection.cpp
2016-11-21 00:52:17 -06:00
Moritz
d67c1d825f
Add TMC2130 support
2016-11-21 00:17:45 -06:00
Scott Lahteine
11effeee2c
Add an option for delta to home to the top
2016-11-20 23:12:07 -06:00
Sebastianv650
50059690e0
Allow UART ISRs inside the stepper ISR
...
If the stepper ISR takes too long, chars are lost which leads to serial
communication errors like "Line number not +1" or "Wrong checksum". In
worst case, the printer can even do crazy moves.
With this changes, UART interrupts are handled inside the stepper ISR.
This way, no chars should be lost.
2016-11-20 13:09:12 +01:00
Moshen Chan
29b174bfb9
Fix z feedrate value when doing mesh bed leveling. probe feedrate uses XY_PROBE_SPEED
2016-11-19 16:34:41 -08:00
AnHardt
88b38eafd8
Endstop interrupt refinement
...
At the start of a move, check if the endstops are already triggered.
The 'change' interrupts will not see a change if already triggered.
2016-11-19 13:30:49 +01:00
Scott Lahteine
79c8591192
Merge pull request #5253 from thinkyhead/rc_smooth_move_ex-lax
...
Ensure smooth print moves even with LCD enabled
2016-11-19 01:38:41 -06:00
Scott Lahteine
0215cacb30
Merge pull request #5247 from esenapaj/Re-follow-the-PR-#4634
...
Re-follow the PR #4634 (Set language display charset in language.h)
2016-11-19 01:32:40 -06:00
Scott Lahteine
2cc32d85a3
Adjust ENSURE_SMOOTH_MOVES coding style
2016-11-19 01:28:48 -06:00
Scott Lahteine
072541f286
Update ENSURE_SMOOTH_MOVES in all configs
2016-11-19 01:28:47 -06:00
Sebastianv650
de89dc9f04
Ensure smooth print moves even with LCD enabled
...
lcd_update can take so much time that the block buffer gets drained if
there are only short segments. This leads to jerky printer movements for
example in circles and a bad print quality.
This change implements a simple check: Only if the block currently
executed is long enough, run lcd_update.
This also means the printer will not show actual values on the LCD nor
will it respond to buttons pressed. A option that keeps the menu
accessible is also available.
Aditionaly, slow down if a block would be so fast that adding a new
block to the buffer would take more time. In this case, the buffer would
drain until it's empty in worst case.
2016-11-19 01:28:47 -06:00
Scott Lahteine
87b6b19256
Patch CASE_LIGHT typo
2016-11-18 23:49:12 -06:00
Scott Lahteine
0be6167f14
Merge pull request #5250 from CONSULitAS/RCBugFix_K8200_backinsync_2016-11-18
...
K8200: Example configuration back in sync
2016-11-18 22:49:18 -06:00
Scott Lahteine
eb714ee873
Move dummy thermistor opts, fix redundant sensor comment
2016-11-18 22:24:48 -06:00
Scott Lahteine
7a99c6ce4f
Reformat temp sensor listing
2016-11-18 22:24:47 -06:00
Scott Lahteine
181cdb3cfe
Move GCode list above include lines
2016-11-18 22:24:46 -06:00
Scott Lahteine
25d0c167bd
More detailed static_assert messages
2016-11-18 22:24:46 -06:00
Scott Lahteine
eb120e518c
Followup to new endstop interrupts feature
...
- Fix typos, verbiage
- Fix naming of `setup_endstop_interrupts`
- Some formatting, indentation, spacing
2016-11-18 21:53:45 -06:00
Scott Lahteine
832fe284b4
Merge pull request #5184 from AnHardt/endstop_interrupts
...
Introduce endstop interrupts
2016-11-18 20:50:24 -06:00
CONSULitAS
cbae44df64
K8200: Example configuration back in sync
...
Configuration.h: back in sync, new features configured
Configuration_adv.h: back in sync, new features configured
README.md: text updated
2016-11-18 22:55:02 +01:00
esenapaj
5db3738fe7
Re-follow the PR #4634 (Set language display charset in language.h)
2016-11-18 17:44:49 +09:00
Scott Lahteine
6eb6f12c64
Patch up some language formatting
2016-11-18 01:16:58 -06:00
Bo Herrmannsen
8cffa60cc5
Update to Danish language 10/11-2016
2016-11-18 01:16:57 -06:00
Scott Lahteine
98600e1433
Minor stepper cleanup
2016-11-18 01:15:57 -06:00
Florian Heilmann
d08867986e
Add autotemp capabilities to M104
...
This allows M104 to pass the F and B parameters to enable autotemp as well
2016-11-17 11:28:19 -06:00
Sebastianv650
c11b2bb777
Bugfix LIN_ADV
...
Advance has nothing todo with Z_AXIS, strange copy&paste error?
2016-11-17 11:28:19 -06:00
Scott Lahteine
ee0765e872
Merge pull request #5233 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
2016-11-17 03:38:19 -06:00
Scott Lahteine
2330619da0
Merge pull request #5191 from petrzjunior/const
...
Replace const bool with #define for consistency
2016-11-17 03:37:32 -06:00
esenapaj
b278b7a395
Update Japanese translation
...
Only adjust spacing
2016-11-17 09:05:51 +09:00
Petr Zahradník junior
d7ce5d271b
Replace const bool with #define for consistency
2016-11-16 18:55:21 +01:00
Scott Lahteine
d63230d73e
Merge pull request #5192 from Kaibob2/patch-7
...
Printer Stats / Completed prints line doesn't fit in display (when german)
2016-11-16 00:16:36 -06:00
Scott Lahteine
548b45026d
Merge pull request #5214 from Sebastianv650/RCBugFix_planner_opt
...
Save some cycle inside the planner
2016-11-16 00:06:55 -06:00
Scott Lahteine
5d23e52d75
Merge pull request #5228 from thinkyhead/rc_keep_last_mix
...
Fix DIRECT_MIXING_IN_G1 to preserve the previous mix
2016-11-15 19:12:01 -06:00
Scott Lahteine
db47aa983d
Merge pull request #5226 from mtowara/RCBugFix
...
bump -std in Makefile to c++11
2016-11-15 16:13:32 -06:00
Scott Lahteine
99b0c1fe56
Fix DIRECT_MIXING_IN_G1 to preserve the previous mix
2016-11-15 16:12:26 -06:00
Markus Towara
23a675f621
reduce binary size of .hex
...
still a few bytes bigger than with arduino but nothing major
2016-11-15 21:57:15 +01:00
Markus Towara
5b6e2cecf5
bump c/c++ standard to gnu11
...
needed for constexpr
2016-11-15 21:54:12 +01:00
Scott Lahteine
410657b050
Fix G30 with limits, print correct probe XY
2016-11-15 14:10:28 -06:00
AnHardt
f3eee02596
Introduce endstop interrupts
...
If ENDSTOP_INTERRUPTS_FEATURE is enabled this tries to set up interrupt routines
for all used endstop pins. If this worked without errors, `endstops.update()` is called
only if one of the endstops changed its state.
The new interrupt routines do not really check the endstops and react upon them. All what they
do, is to set a flag if it makes sense to call the endstop test we are used to.
This can be used on:
* ARM (DUE) based boards - all pins can raise interrupts,
* RAMPS - all 6 endstop pins plus some other on EXT-2 can raise interrupts,
* RAMPS based boards - as long the designers did not change the pins for the endstops or at least left enough,
* all boards, if there are enough pins that can raise interrupts, and you are willing/able to swap with pins dedicated to other purpose.
2016-11-15 12:07:41 +01:00
Sebastianv650
e3ffb58fbd
Save some cycle inside the planner
...
planner.h:
fan speed is used to set integer variables, so no need for long.
Basicaly a byte should be enough for all the fan things, as it's 0-255?
planner.cpp:
Save some float multiplications.
We could squeeze out even more by defining feedrate_percentage,
saved_feedrate_percentage and flow_percentage as float instead of int.
Everytime they are used in the time-critical planner, they are casted to
float and multiplied by 0.01. Not done jet, as they are used in LCD menu
functions I don't know well enough.
2016-11-13 13:34:12 +01:00
Scott Lahteine
665b7f3893
Merge pull request #5212 from thinkyhead/rc_mixing_faster
...
Store mix factors as reciprocals and multiply
2016-11-12 18:47:11 -06:00
Scott Lahteine
60cc9342a4
Merge pull request #5188 from thinkyhead/rc_extended_host_support
...
Extended host support: M155 Auto temp report, M115 capabilities
2016-11-12 15:38:06 -06:00
Scott Lahteine
f663220e87
Store Mix factors as reciprocals and multiply
2016-11-12 15:19:18 -06:00
Scott Lahteine
ea3c08d249
Merge pull request #5186 from esenapaj/Follow-up-the-PR-#5167-etc
...
Follow up the PR #5167 (Add Turkish Language) again, etc
2016-11-12 13:11:54 -06:00
Scott Lahteine
c488378532
Merge pull request #5205 from Sebastianv650/RCBugFix_stepperpatch
...
Remove useless line from stepper ISR
2016-11-12 12:43:07 -06:00
Michael Neumann
8bdf303da0
Update pins_MEGATRONICS_3.h
2016-11-12 12:26:07 +01:00
Michael Neumann
3890366c83
Update pins.h
2016-11-12 12:25:45 +01:00
Michael Neumann
c0d45ca7f2
Update boards.h
2016-11-12 12:24:47 +01:00
Sebastianv650
cdc18f8c22
Remove useless line from stepper ISR
...
The flag is already set inside planner.get_current_block(). Doing it
twice isn't making it better..
2016-11-11 19:35:03 +01:00
Kai
8e8b4398f3
Printer Stats / Completed prints line doesn't fit in display (when german)
2016-11-09 22:03:25 +01:00
Scott Lahteine
b31a07e261
Stateful M355 with separate P parameter
2016-11-09 03:28:18 -06:00
Scott Lahteine
3c9a838651
Extended capabilities report in M115
2016-11-09 02:32:58 -06:00
Scott Lahteine
68b866b5dd
Add M155 - Auto-report temperature with interval
2016-11-09 02:32:58 -06:00
Scott Lahteine
68b46fb2c9
Allow send to i2c address 0 (broadcast)
2016-11-08 17:54:55 -06:00
Scott Lahteine
75bfde9945
M155=>M260, M156=>M261
2016-11-08 17:54:54 -06:00
esenapaj
2ae72b0491
Follow up the PR #5167 (Add Turkish Language) again, etc
...
・Update forgotten K8400\Dual-head\Configuration.h
・Adjust spacing
2016-11-09 06:31:21 +09:00
Scott Lahteine
06f2282f82
Merge pull request #5176 from thinkyhead/rc_filchange_feedback
...
Give instant feedback for filament change
2016-11-07 12:11:54 -06:00
Scott Lahteine
dcfd7c69e8
Merge pull request #5163 from nzinov/RCBugFix
...
Improve G30 probing command - add optional arguments
2016-11-07 11:37:13 -06:00
Scott Lahteine
e765eebfb0
Patch spacing in bilinear grid report
2016-11-07 04:08:25 -06:00
Scott Lahteine
7780052fb3
Give instant feedback for filament change
2016-11-07 03:48:16 -06:00
esenapaj
24e3f7abe7
Update Turkish translation
...
・Add new translation
2016-11-07 04:59:18 +09:00
esenapaj
be48792e9c
Follow up the PR #5167 (Add Turkish Language), etc
...
・Remove all the #ifndef
・Follow the PR #4603 (Strip never-translated strings from language
files)
・Follow the PR #4634 (Set language display charset in language.h)
・Follow the PR #4936 (Put max_jerk vars in array, clean up jerk code)
・Adjust spacing
2016-11-06 23:59:02 +09:00
Scott Lahteine
1864b282c5
Implement reversed CORE options
2016-11-05 23:47:51 -05:00
Scott Lahteine
e3c8318504
Add reversed CORE options
2016-11-05 23:47:46 -05:00
Rigid3D
2327764980
Add Turkish Language
2016-11-05 21:06:16 -05:00
Nikolay Zinov
dea00bbcf1
improve G30 probing
...
Add optional parameters
X, Y for probe point
S sets stowing on and off
2016-11-05 13:22:45 +03:00
Scott Lahteine
00662b8635
Minor babystep cleanup patches
2016-11-03 23:31:45 -05:00
Scott Lahteine
cad792e702
Reduce code for invariant lcd_detected
2016-11-03 23:31:45 -05:00
Scott Lahteine
b23d255491
Move macros above Stepper::babystep
2016-11-03 23:31:45 -05:00
Scott Lahteine
cc57d46158
Fix set_position for CoreYZ
2016-11-03 23:31:45 -05:00
Scott Lahteine
0269347682
Merge pull request #5141 from thinkyhead/rc_old_slowdown_what
...
OLD_SLOWDOWN does nothing, so remove it
2016-11-03 23:30:43 -05:00
Scott Lahteine
e92e2b2446
Merge pull request #5144 from Sebastianv650/RCBugFix_LIN_ADV_wipe
...
Account for wipe moves
2016-11-03 23:19:25 -05:00
Scott Lahteine
176aeafc19
Don't define bilinear_line_to_destination on kinematic setups
2016-11-03 14:10:07 -05:00
Sebastianv650
d448500643
Account for moves with negative E movements
...
Added a rule so that LIN_ADVANCE isn't used for moves with negative E movements (de_float will be negative in this cases).
I also added a more detailed comment to make it more clear what the if statement does.
2016-11-03 17:01:17 +01:00
Scott Lahteine
236853df22
Corrections to bilinear_line_to_destination
...
- Allow more than 9x9 probe points
- Account for the probe starting position
2016-11-03 04:43:59 -05:00
Scott Lahteine
0115e495fe
Fix up Dual X switch blocks
2016-11-02 21:38:50 -05:00
Scott Lahteine
2495ab7af2
Make dual_x_carriage_mode an enumeration
2016-11-02 21:38:49 -05:00
Scott Lahteine
d6c36f5bb9
Fix Z raise with DXC_AUTO_PARK_MODE
2016-11-02 21:36:50 -05:00
Scott Lahteine
0c79553fc5
Cast int to AxisEnum for some accessors
2016-11-02 17:42:24 -05:00
Scott Lahteine
adbf1f7dca
Add M355 to the GCodes list.
2016-11-02 16:43:52 -05:00
Scott Lahteine
63efc10599
Merge pull request #5134 from thinkyhead/rc_bilinear_split_lines
...
Split cartesian moves on grid boundaries with bilinear ABL
2016-11-02 16:14:55 -05:00
Scott Lahteine
12167bc8f3
OLD_SLOWDOWN does nothing, so remove it
2016-11-02 01:28:19 -05:00
esenapaj
c8c1a28f6f
Follow-up the PR #5089 (Centralize click-handling in the LCD loop)
...
bool feedback is no longer used
2016-11-02 08:36:02 +09:00
esenapaj
c3a105186d
Follow-up the PR #5133 (M355 Case light)
...
・Add CASE_LIGHT_PIN into pinsDebug.h
2016-11-02 00:31:50 +09:00
Scott Lahteine
ee5b8d6dc8
Split moves on grid boundaries with bilinear ABL on cartesian
2016-11-01 08:25:47 -05:00
Scott Lahteine
66744a6076
Merge pull request #5133 from thinkyhead/rc_M355_case_light
...
M355 Case light
2016-11-01 07:51:27 -05:00
Scott Lahteine
955d14acb0
Patch photo pin code style
2016-11-01 06:30:14 -05:00
Stanley
ab3f966f5f
Case light G-code M355
...
implemented G-Code M355 into Marlin
2016-11-01 06:30:14 -05:00
Scott Lahteine
8b44413498
Merge pull request #5124 from Sebastianv650/RCBugFix_LIN_ADV-Patch
...
BugFix for incorrect E-speed calculation
2016-11-01 05:13:17 -05:00
Scott Lahteine
f418e82b15
Remove redundant definition of EN_C
2016-11-01 05:10:07 -05:00
Sebastianv650
f9bea7968f
BugFix for incorrect E-speed calculation
...
The extrusion speed was wrong due to a not high enough precision of
esteps to XY steps, therefore now the target float values are used to
calculate the ratio between XY movement and extrusion speed.
The e_speed_multiplier8 was replaced by an absolute multiplier called
abs_adv_steps_multiplier8, therefore one multiplication and bitshift can
be saved inside the stepper ISR. Due to this, also extruder_advance_k is
better suited inside the planner and not the stepper files any more.
2016-11-01 08:08:47 +01:00
Bob-the-Kuhn
c20b4098be
2 bug fixes & some minor changes
...
see detailed description in PR #5118
2016-11-01 01:29:41 -05:00
Scott Lahteine
fa6bf12697
Merge pull request #5118 from thinkyhead/rc_expanded_M43
...
Enhancements to M43 pins debugging
2016-10-31 08:29:53 -05:00
Scott Lahteine
3a107e280d
Developer note in pins_MIGHTYBOARD_REVE.h
2016-10-31 08:22:39 -05:00
Scott Lahteine
85e307dcd8
No FAN0_PIN
2016-10-31 08:08:03 -05:00
Scott Lahteine
ff3a8ca0d1
Use NUM_DIGITAL_PINS instead of custom DIO_COUNT
2016-10-31 08:08:03 -05:00
Scott Lahteine
04a1fac029
Some cleanup to M43
2016-10-31 08:08:03 -05:00
Scott Lahteine
24f6612551
Reduce and optimize endstop_monitor code
2016-10-31 08:08:03 -05:00
Scott Lahteine
b4444e91ae
Reduce code and build size of PWM_details
2016-10-31 08:08:02 -05:00
Scott Lahteine
dbe414ef03
Squash redundant code in PWM_status
2016-10-31 08:08:02 -05:00
Scott Lahteine
af26d22741
Clean up some spacing and semantics
2016-10-31 08:08:02 -05:00
Bob-the-Kuhn
81397d7a9a
EXTRUDER_x_AUTO_FAN name change to Ex_AUTO_FAN
...
I stumbled across a name change that'll be used a lot so I'm updateing
the name list.
2016-10-31 08:08:02 -05:00
Bob-the-Kuhn
c7f1f0dae6
Add endstop monitor & make pins report pretty
2016-10-31 08:08:02 -05:00
Scott Lahteine
d567b426d5
Merge pull request #4894 from thinkyhead/rc_mightyboard_rev_e
...
Mightyboard Revision E preliminary support
2016-10-31 08:01:41 -05:00
Scott Lahteine
43df9ace4e
Merge pull request #5110 from thinkyhead/rc_z2_min_allowed
...
Support Z2 min in M119 report
2016-10-31 07:59:45 -05:00
Scott Lahteine
23f05f8be7
Use bit-length types in block_t
2016-10-30 16:16:29 -05:00
Scott Lahteine
8dc7807d85
Add support for CoreYZ to planner.buffer_line
2016-10-30 16:16:28 -05:00
Scott Lahteine
1cf878fdb1
Calculate dm and e-steps earlier in planner
2016-10-30 16:16:28 -05:00
Scott Lahteine
75dbb71dd7
Replace block.busy with a block.flag bit
2016-10-30 16:16:28 -05:00
Scott Lahteine
c7f22f688f
buffer_line can calculate while it's waiting
2016-10-29 17:08:42 -05:00
Scott Lahteine
f3720f4e81
const arguments to test_dual_z_endstops
2016-10-29 16:01:27 -05:00
Scott Lahteine
8cebd2a7db
Arrange Z2 min before Z2 max
2016-10-29 01:54:19 -05:00
Scott Lahteine
accabf088a
Add support for Z2 min endstop to M119
2016-10-29 01:54:02 -05:00
Scott Lahteine
396434a445
Fix compiler warning in M145
2016-10-28 20:57:36 -05:00
Scott Lahteine
8e787304c9
const float ref args in planner.h
2016-10-28 20:57:36 -05:00
Scott Lahteine
07bfc45df8
Adjust spacing in gcode_M149
2016-10-28 20:57:36 -05:00
Scott Lahteine
1a2310c494
Make LCD preheat vars an array to reduce code size
2016-10-28 20:57:36 -05:00
Scott Lahteine
1226ae1912
Some cleanup in ultralcd.h
2016-10-28 20:57:21 -05:00
Scott Lahteine
50ee749082
Centralize click-handling in the LCD loop
2016-10-28 20:57:21 -05:00
Scott Lahteine
47ad97c35e
Merge pull request #5109 from thinkyhead/rc_eeprom_M218_tool_offset
...
Save hotend_offset array (M218) in EEPROM
2016-10-28 20:08:29 -05:00
Scott Lahteine
bff6bbdb12
Indentation in configuration_store.cpp
2016-10-28 18:55:42 -05:00
Scott Lahteine
97115d56f9
Print error for M500 with disabled EEPROM
2016-10-28 18:53:48 -05:00
Scott Lahteine
67ab54185b
Save hotend_offset array (M218) in EEPROM
2016-10-28 18:45:23 -05:00
MagoKimbra
dfcdbb437b
Fix Command M420
2016-10-28 20:53:48 +02:00
Scott Lahteine
c34dbfb248
Merge pull request #5072 from thinkyhead/rc_preset_auto_fans
...
Add predefined AUTO_FAN_PINs to pins files
2016-10-27 17:12:11 -05:00
Scott Lahteine
9a23f73765
Don't trigger endstops that are actually Z2 or probe
2016-10-27 08:12:17 -05:00
Scott Lahteine
c07cc9e3f1
Revert changes made to z dual endstop test
...
#3631 broke z dual endstops. Solved by @Nocturnal42 in https://github.com/MarlinFirmware/Marlin/issues/5078#issuecomment-256572248
2016-10-27 07:41:39 -05:00
Scott Lahteine
c4c53856a4
Merge pull request #5094 from esenapaj/Fix-for-the-PR-#5088
...
Fix for the PR #5088 (Handle M108 in M1 also with ULTIPANEL)
2016-10-26 21:51:18 -05:00
Scott Lahteine
2e3110539b
Merge pull request #5095 from thinkyhead/rc_fix_bilinear_math
...
Fix bilinear grid constraints
2016-10-26 21:48:19 -05:00
esenapaj
d5a5042d23
Fix for the PR #5088 (Handle M108 in M1 also with ULTIPANEL)
2016-10-27 10:32:20 +09:00
Scott Lahteine
9cbedab91b
Use DPM where possible
2016-10-26 18:38:32 -05:00
Scott Lahteine
ad38d91692
Sanity check that auto fan pins can do PWM
2016-10-26 18:38:32 -05:00
Scott Lahteine
95275eb9b3
Predefine auto fan pins in some pins files
2016-10-26 18:38:32 -05:00
Scott Lahteine
3f94b15cef
Fix bilinear grid constraints
...
Followup to #5090
2016-10-26 18:11:26 -05:00
Scott Lahteine
d439fb95f7
Sanity check for the renamed options
2016-10-26 17:51:26 -05:00
Scott Lahteine
b6aa894893
Rename auto fan pins and add auto fan flags
2016-10-26 17:51:26 -05:00
Scott Lahteine
ada935de87
Allow TEMP_STAT_LEDS with only one LED defined
2016-10-26 17:51:26 -05:00
Scott Lahteine
4b056d8184
Fix warning in ultralcd.cpp
2016-10-26 17:51:26 -05:00
Scott Lahteine
9dfd029911
Fix bug in fastio.h _GET_TIMER
2016-10-26 17:51:25 -05:00
esenapaj
8b1d90e281
Follow-up the PR #5087 (Fixed SERVO pins on Azteeg X3), etc
...
・Add header
・Adjust spacing
2016-10-27 06:46:03 +09:00
Scott Lahteine
bfd3b3c604
Merge pull request #5087 from Fulg/azteeg-x3-pins
...
Fixed SERVO pins on Azteeg X3
2016-10-26 06:01:16 -05:00
Scott Lahteine
208d720614
Merge pull request #5082 from Fulg/RCBugFix
...
Only issue MAXTEMP when heating
2016-10-26 05:55:33 -05:00
Scott Lahteine
f0d673561f
Fix for bilinear grid outside bounds
2016-10-26 05:00:03 -05:00
Scott Lahteine
24bcea6c02
Merge pull request #5088 from thinkyhead/rc_break_m1_fix
...
Handle M108 in M1 also with ULTIPANEL
2016-10-26 00:44:01 -05:00
Scott Lahteine
1ba1ec0db9
Handle M108 in M1 also with ULTIPANEL
2016-10-25 23:25:47 -05:00
Scott Lahteine
7ad33422e3
Clear dir_t size, not pointer size
2016-10-25 22:59:40 -05:00
Benoit Miller
1c716034ec
Fixed SERVO pins on Azteeg X3
2016-10-25 17:11:26 -04:00
Benoit Miller
2aa12d78dc
Only issue MAXTEMP when heating
2016-10-24 17:09:29 -04:00
Scott Lahteine
3fcf915808
Fix uninitialized var in reset_acceleration_rates
2016-10-24 11:55:41 -05:00
Scott Lahteine
14f824c3de
Merge pull request #5071 from esenapaj/Extend-measuring-range-of-thermocouple
...
Extend measuring range of thermocouple for MAX31855
2016-10-24 02:00:12 -05:00
Scott Lahteine
1097a50694
Merge pull request #5070 from gcormier/rcbugfix
...
Fix #4995 - M48/G29 on CoreXY maybe others?
2016-10-24 00:56:36 -05:00
Sebastianv650
c397b9d60a
Planner acceleration bugfix and speedup v2
...
.) Use already existing inverse_millimeters instead of /
block->millimeters.
.) Prevent overflow during acceleration calculation by checking if float
is necessary. Idea modified from Sailfish.
.) Save two uint32_t or even float multiplications by checking if
step[AXIS] has steps and if max acceleration is lower than accel. If
not, there is no need to check this axis.
2016-10-23 12:47:46 +02:00
esenapaj
70e287ca8c
Extend measuring range of thermocouple for MAX31855
2016-10-23 10:22:39 +09:00
Greg Cormier
f0aed9dac7
Fix #4995 - M48/G29 on CoreXY maybe others?
2016-10-22 20:45:13 -04:00
esenapaj
e50992694f
Fix for the PR #5066 (Updated french translation)
...
MSG_INFO_PRINT_TIME is still being used
2016-10-23 06:09:56 +09:00
Scott Lahteine
483082387c
Merge pull request #5022 from esenapaj/Fix-for-the-PR-#4553
...
Fix for the PR #4553 (Save bytes for custom chars (Hitachi LCD))
2016-10-22 13:54:09 -05:00
Scott Lahteine
8b967a9ff0
Merge pull request #5058 from thinkyhead/rc_reverse_arrow_buttons
...
Apply encoder reverse options to keypad arrows
2016-10-22 13:52:35 -05:00
esenapaj
523c7eaa6c
Fix for the PR #4553 (Save bytes for custom chars (Hitachi LCD))
2016-10-23 03:29:00 +09:00
Scott Lahteine
ca48a49fdb
Merge pull request #5065 from petrzjunior/transl
...
[LANGUAGE] Update Czech (BLTOUCH and DAC strings)
2016-10-22 12:46:10 -05:00
Scott Lahteine
f0744fc815
Merge pull request #5066 from thinkyhead/rc_french_update
...
Updated french translation
2016-10-22 12:45:51 -05:00
Gege2B
88b7f6eb46
Updated french translation
2016-10-22 12:30:22 -05:00
Scott Lahteine
3544c3632f
Merge pull request #5062 from thinkyhead/rc_warnings_fix
...
Warnings fixed redux
2016-10-22 12:21:36 -05:00
Petr Zahradník junior
8323d78ed7
Translated BLTOUCH and DAC strings
2016-10-22 19:12:21 +02:00
Scott Lahteine
e151f952a3
Apply encoder reverse options to keypad arrows
2016-10-22 11:51:33 -05:00
Scott Lahteine
cfb47929ca
Merge pull request #5060 from thinkyhead/rc_fix_ugly_code
...
Reduce, clean up MINTEMP / MAXTEMP test code
2016-10-22 11:27:30 -05:00
Josef Pavlik
dca50737f5
fixed warning: ISO C++ forbids compound-literals
2016-10-22 11:23:16 -05:00
Josef Pavlik
0bd66807b2
fixed warning: extra ;
2016-10-22 11:12:29 -05:00
Josef Pavlik
d35dc407a8
fixed warning: ISO C99 requires rest arguments to be used
2016-10-22 11:12:29 -05:00
Josef Pavlik
c2b51af3ba
fixed warning: ISO C does not permit named variadic macros
2016-10-22 11:12:29 -05:00
Scott Lahteine
0d3fc7dd89
Merge pull request #5059 from gcormier/fixbaby
...
Set defer delay back to false when exiting babystepping.
2016-10-22 10:59:17 -05:00
Scott Lahteine
f888597197
Reduce, clean up code for mintemp/maxtemp tests
2016-10-22 10:31:03 -05:00
Scott Lahteine
ad64723354
Move MAX_EXTRUDERS to pins.h
2016-10-22 10:07:51 -05:00
Scott Lahteine
5f5a55a0de
Add a ZERO macro to clear arrays
2016-10-22 10:07:18 -05:00
Greg Cormier
0009725637
Set defer delay back to false when exiting babystepping.
2016-10-22 09:43:30 -04:00
Scott Lahteine
627f9d5285
Merge pull request #5056 from thinkyhead/rc_lin_adv_opt
...
LIN_ADVANCE optimizations
2016-10-22 07:06:39 -05:00
Scott Lahteine
0908329d96
Merge pull request #5057 from thinkyhead/rc_mbl_lcd_logical
...
Fix manual leveling coordinates
2016-10-22 06:31:02 -05:00
Scott Lahteine
14e60f0d3b
Correct typo in configs
...
As pointed out by #5044
2016-10-22 05:56:32 -05:00
Scott Lahteine
1165e83263
MBL coordinates are logical
2016-10-22 05:55:44 -05:00
Scott Lahteine
dbfabb4c0a
Merge pull request #5043 from Kaibob2/patch-5
...
Correct grammar and translation in language_de.h
2016-10-22 05:52:54 -05:00
Scott Lahteine
b19bba275f
No LCD timeout during babystepping
...
As requested in #5031
2016-10-22 05:26:07 -05:00
Scott Lahteine
b9109b2875
Improve LIN_ADVANCE commentary (all configs)
2016-10-22 05:03:09 -05:00
Sebastianv650
9818d97587
Fix Z-hops during retract/prime lead to blobs
...
We don't want to have retract/prime movements done with LIN_ADVANCE, that's also true with simultaneously executed Z-hops.
2016-10-22 04:54:59 -05:00
Sebastianv650
599649e45d
Add formula for LIN_ADVANCE_K
...
With this formula, a start value for K for further fine-calibration can be calculated.
2016-10-22 04:54:59 -05:00
Scott Lahteine
be7d245eff
Merge pull request #5008 from thinkyhead/test_endstop_hits
...
Save some PROGMEM in MBL G28
2016-10-22 03:35:52 -05:00
Scott Lahteine
7c0e52256d
Merge pull request #5053 from thinkyhead/rc_fix_baud_config
...
Patch BAUDRATE line in configs
2016-10-22 03:27:45 -05:00
Scott Lahteine
2783dcb4cc
Save some RAM in MBL's G29
2016-10-22 02:52:56 -05:00
Scott Lahteine
4f5a8c05d5
Tweaks to endstops macros
2016-10-22 02:52:56 -05:00
Scott Lahteine
083d41a2c2
Remove redundant estep rate code from LIN_ADVANCE
...
As noted by https://github.com/MarlinFirmware/Marlin/pull/4971#issuecomment-252503295
2016-10-22 02:19:14 -05:00
Scott Lahteine
4f6bfabaad
Patch BAUDRATE line in configs
2016-10-22 00:48:52 -05:00
Kai
2bfedb74d5
Correct grammar and translation in language_de.h
...
Made Filament change Text sound like correct german.
2016-10-19 14:56:46 +02:00
esenapaj
1e1edeadd3
Fix for the commit dc2cb84 (Revert acceleration limiting to avoid overflow)
...
・Add forgotten '\'
2016-10-18 18:07:20 +09:00
Scott Lahteine
dc2cb8454c
Revert acceleration limiting to avoid overflow
2016-10-17 17:08:41 -05:00
Scott Lahteine
6ae5cf17a9
Merge pull request #5033 from esenapaj/Fix-freezing-with-MAX31855
...
Fix freezing and MINTEMP Error with MAX31855 thermocouple
2016-10-17 16:22:20 -05:00
Scott Lahteine
f257c4bcae
Merge pull request #5036 from thinkyhead/rc_dac_code_deps
...
Fix DAC current code
2016-10-17 16:19:00 -05:00
Scott Lahteine
b80cc0cbb5
Fix DAC current code
2016-10-17 15:17:57 -05:00
esenapaj
385bd8a4a3
Fix freezing and MINTEMP Error with MAX31855 thermocouple
2016-10-16 07:33:14 +09:00
Scott Lahteine
ca7275a67a
Disable EXTRAPOLATE_FROM_EDGE by default
2016-10-14 14:44:28 -05:00
Scott Lahteine
0921c7da84
Merge pull request #4997 from thinkyhead/rc_jerk_from_mk2
...
Adapt Jerk / Speed code from Prusa MK2
2016-10-12 06:38:50 -05:00
Scott Lahteine
4d89652bc2
Apply minor optimizations to planner.cpp
2016-10-12 04:42:15 -05:00
Scott Lahteine
1092319b19
Adapt speed/jerk code based on Prusa MK2 branch
2016-10-12 04:42:14 -05:00
Scott Lahteine
37643fef63
Merge pull request #4972 from bgort/platformio-improvements
...
Move platformio directories out of source tree
2016-10-12 03:42:33 -05:00
Scott Lahteine
8e1cc9332a
Replace block flag bools with flag bits
...
…and apply const to some method parameters
2016-10-10 23:17:49 -05:00
Scott Lahteine
d41f2bdbd8
Merge pull request #4991 from thinkyhead/rc_max31855_fix
...
Patches for Stepper DAC and MAX31855
2016-10-10 20:12:06 -05:00
Scott Lahteine
e7cf566fc5
Do kinematic segments with buffer_line_kinematic
...
This breaks the raw option, but in the future perhaps all planner moves
will be sent in raw form instead of logical.
2016-10-10 17:14:03 -05:00
Scott Lahteine
a10e81dc2a
Minor cleanup of set_bed_leveling_enabled
2016-10-10 17:14:03 -05:00
Scott Lahteine
029824bc49
Patch ADJUST_DELTA macro for SCARA
2016-10-10 17:14:03 -05:00
Scott Lahteine
5ce5a9c822
Marlin: planner.h tweak
2016-10-10 17:14:03 -05:00
Scott Lahteine
d963020532
Sort out some header dependencies
2016-10-10 17:14:03 -05:00
Scott Lahteine
e17f9b8b99
DAC patches
...
As suggested by #4985
2016-10-10 14:08:04 -05:00
Scott Lahteine
2cb5df8a56
Merge pull request #4984 from esenapaj/Small-fix-for-PR-#4980
...
Small fix for the PR #4980 (LIN_ADVANCE bug fix and optimization)
2016-10-10 13:30:47 -05:00
Scott Lahteine
b6221df3f3
Merge pull request #4983 from MarlinFirmware/revert-4933-rc_drop_pid_func_range
...
Revert "Removal of PID functional range"
2016-10-10 13:29:54 -05:00
Scott Lahteine
a07033a6c1
Merge pull request #4974 from esenapaj/Follow-up-the-PR-#4955
...
Fix and follow-up the PR #4955 (PINS_DEBUGGING and M43: Read pin states), etc
2016-10-10 13:27:52 -05:00
Scott Lahteine
f8199b2cc1
Merge pull request #4982 from thinkyhead/rc_abl_bugfix
...
Fix planner with kinematics, delta ABL
2016-10-10 13:24:22 -05:00
esenapaj
f41c60d4a4
Follow-up the PR #4955 , etc
...
・More ANALOG NUMBERING to Analog Input
・Add comment header to all the section of all the pins files
・Sort sections as follows:
1. Some special definitions (USBCON, LARGE_FLASH, etc)
2. Servos
3. Limit Switches
4. Z Probe
5. Steppers
6. Temperature Sensors
7. Heaters / Fans
8. Misc. Functions
9. LCD / Controller
・Move MAX6675_SS into "Temperature Sensors" section
・Adjust spacing
2016-10-10 14:22:43 +09:00
esenapaj
00456b0cb3
Fix compilation errors
2016-10-10 14:22:43 +09:00
esenapaj
cfb5c24bc9
Small fix for the PR #4980 (LIN_ADVANCE bug fix and optimization)
...
・Fix a comment about timer
2016-10-10 07:48:42 +09:00
Scott Lahteine
149b8d9e4b
Handle MAX31855 error conditions
2016-10-09 17:12:50 -05:00
Scott Lahteine
f4ec265363
Fix a typo
2016-10-09 16:45:29 -05:00
Scott Lahteine
4ec2d459e6
Fix mcp4728_setVref_all as followup to #4967
2016-10-09 16:45:00 -05:00
Scott Lahteine
1e551c0688
Revert "Squashed - Removal of PID functional range"
2016-10-09 16:27:45 -05:00
Scott Lahteine
4037df82b0
Merge pull request #4981 from esenapaj/Update-Japanese-language
...
Update Japanese translation, etc
2016-10-09 16:11:53 -05:00
Scott Lahteine
e4e290d957
Make EXTRUDER_RUNOUT_PREVENT kinematic compatible
2016-10-09 15:58:33 -05:00
Scott Lahteine
847429eff4
Make tool_change kinematic compatible
2016-10-09 15:58:32 -05:00
Scott Lahteine
a4a7ca10ca
Make USE_DELTA_IK_INTERPOLATION compatible with ABL
2016-10-09 15:58:32 -05:00
Scott Lahteine
c5cac486f5
Use a, b, c instead of lx, ly, lz
2016-10-09 14:34:24 -05:00
Josef Pavlik
f8c2473a71
Improve planner kinematics, fix delta ABL
2016-10-09 13:32:46 -05:00
Scott Lahteine
48761f2021
Patch delta endstop adjustment config
2016-10-09 13:32:45 -05:00
Josef Pavlik
28d41b48e3
delta endstop adjustment configurable
2016-10-09 13:09:34 -05:00
Scott Lahteine
ff6b23cb0f
Fix an issue with shifted LCD lines
2016-10-09 13:00:00 -05:00
Scott Lahteine
e4d2662d81
Use some macros in M48
2016-10-09 12:21:05 -05:00
Scott Lahteine
3752d9aca8
Fix timer comments
2016-10-09 12:11:00 -05:00
Sebastianv650
a448cedbc5
LIN_ADVANCE bug fix and optimization
...
.) long to int: Extruder stalls at 10kHz / 20kHz step limits with long.
.) Take the delta_adv_steps calculation out of the step_loops loop. Wasted calculation performance if done inside.
.) >> 2 replaced by 3: Is divide by 8. Reason: Timer 0 runs at 16/8=2MHz, Timer 1 at 16/64=0.25MHz. ==> 2/0.25=8.
2016-10-09 11:55:02 -05:00
esenapaj
b27080c1dd
Update Japanese translation
...
・Add new translation
2016-10-10 01:52:51 +09:00
esenapaj
0780146034
Move DAC section from inside of the changing filament section
2016-10-10 01:17:46 +09:00
Brian
9c0404eae4
Move platformio directories out of source tree
2016-10-08 13:45:26 -04:00
Scott Lahteine
a1b50f1102
Cleanup of code style
2016-10-07 15:57:24 -05:00
jaysonkelly
13c9dcc600
Add LCD menu for DAC
2016-10-07 15:13:03 -05:00
Scott Lahteine
00261cbfcb
Merge pull request #4933 from thinkyhead/rc_drop_pid_func_range
...
Squashed - Removal of PID functional range
2016-10-07 15:07:55 -05:00
Scott Lahteine
ee01def16d
Merge pull request #4955 from thinkyhead/rc_debug_pins
...
PINS_DEBUGGING and M43: Read pin states
2016-10-07 14:47:34 -05:00
Scott Lahteine
a0df34fd4c
Add PINS_DEBUGGING advanced config option
2016-10-07 14:20:13 -05:00
Scott Lahteine
e21bab5243
PINS_DEBUGGING and M43 Read Pins
2016-10-07 14:11:48 -05:00
Scott Lahteine
3c97fa6e29
Merge pull request #4963 from esenapaj/Fix-for-advance-algorithm
...
Move routine of direction signal of ADVANCE and LIN_ADVANCE from Stepper::isr() to Stepper::advance_isr()
2016-10-07 00:33:42 -05:00
Scott Lahteine
48e63c4730
Comment some globals
2016-10-06 22:06:33 -05:00
Scott Lahteine
9a6c66602f
Fix formatting of extrapolate debug output
2016-10-06 17:04:22 -05:00
Scott Lahteine
cd77eb5c40
Clear grid for bilinear G29
2016-10-06 17:00:53 -05:00
Scott Lahteine
53a0856f5c
Print Y as int in print_bed_level
2016-10-06 16:46:54 -05:00
esenapaj
f8df88f271
Move routine of direction signal of ADVANCE and LIN_ADVANCE from Stepper::isr() to Stepper::advance_isr()
2016-10-07 02:01:29 +09:00
Brian
357854a7ef
tweak variables;
2016-10-05 19:49:05 -04:00
Brian
48cf19151a
Improve M48 output; Add min, max, range, etc.
2016-10-05 16:09:39 -04:00
Scott Lahteine
c63cb45268
Fix thermal runaway timeout
2016-10-05 08:42:39 -05:00
Scott Lahteine
e6164d254d
Clean up GCode command short comments
2016-10-05 06:13:30 -05:00
Scott Lahteine
47bd142b29
Should marlinAnalogInputToDigitalPin use analogInputToDigitalPin?
2016-10-05 06:13:30 -05:00
Scott Lahteine
bd8520e61d
Label analog pins in a similar way
...
Some other pins formatting also
2016-10-05 06:13:30 -05:00
Scott Lahteine
0c0deb5194
Common pin_is_protected function
2016-10-05 04:41:27 -05:00
Scott Lahteine
49d77720d5
More support for 4th extruder or heater
2016-10-05 04:40:22 -05:00
Scott Lahteine
46839c222a
Comment and clean up some vars
2016-10-04 23:40:45 -05:00
Scott Lahteine
8910bb7c97
Fix buzzer conditional compile
2016-10-04 21:38:41 -05:00
Scott Lahteine
de7e798e6f
Replace single-char S_ECHOs with S_CHAR
2016-10-04 21:38:41 -05:00
Scott Lahteine
0e83f34174
Tweak debugging of probe_pt
2016-10-04 21:38:00 -05:00
Scott Lahteine
cc02f6edf8
Merge pull request #4943 from esenapaj/Small-update-of-language_kana_h
...
Small update of language_kana.h
2016-10-04 03:21:57 -05:00
Scott Lahteine
ca26011e3c
Merge pull request #4941 from MagoKimbra/rc_fix_M205
...
Add note for M205
2016-10-04 03:21:20 -05:00
Scott Lahteine
9485aa8f13
Include negative Z probe offset in clearance move
2016-10-03 16:18:04 -05:00
Scott Lahteine
5c1eb595e6
Fix for G2/G3 negative radius
...
As suggested in #4940
2016-10-03 14:48:44 -05:00
esenapaj
f09ae96f28
Small update of language_kana.h
2016-10-03 23:41:39 +09:00
MagoKimbra
7b37539fe7
Add note for M205
2016-10-03 08:54:15 +02:00
Scott Lahteine
d5f598cd82
Tweak probe debug, add newline
2016-10-02 17:35:40 -05:00
Scott Lahteine
c592ccb6f5
Patch max_jerk[Z] menu item
2016-10-02 10:12:47 -05:00
Scott Lahteine
d80a79eb77
Use right-shift instead of / 2, why not?
2016-10-02 07:01:40 -05:00
Rerouter
02fe9cf558
Removal of functional range constraint
...
Also lined up the >> 1 and / 2 mentioned earlier in the unconstrained I term issue,
2016-10-02 07:01:40 -05:00
Rerouter
5f5d87cad3
Update Configuration.h
2016-10-02 07:01:40 -05:00
Scott Lahteine
761593b74b
Cleanup some vars, use of min/max
2016-10-02 06:34:56 -05:00
Scott Lahteine
d19cfcfc1d
max_jerk array, DEFAULT_XYJERK => DEFAULT_[XY]JERK
2016-10-02 06:34:56 -05:00
Scott Lahteine
e7dc174f30
More detailed debugging of G28 delta
2016-10-02 02:18:57 -05:00
Scott Lahteine
473f4a17a8
Merge pull request #4914 from Rerouter/PID-Unconstrained-Itemp
...
Pid unconstrained itemp
2016-10-01 06:58:07 -05:00
Scott Lahteine
bad8899ebc
Merge pull request #4900 from thinkyhead/rc_g38_changes
...
Cleanup of G38.2 / G38.3
2016-10-01 06:57:17 -05:00
Scott Lahteine
73ce3a61c7
Cleanup, comment zigzag
2016-10-01 05:21:52 -05:00
Scott Lahteine
0d538f3db6
Add to all configurations
2016-10-01 05:00:53 -05:00
Scott Lahteine
919fe3e4b8
Rename feature to G38_PROBE_TARGET
2016-10-01 05:00:53 -05:00
Scott Lahteine
a2864ab7fe
Patched up, cleaned up
2016-10-01 05:00:53 -05:00
Bob-the-Kuhn
2911aa7ffa
code changes to implement G38 commands
...
1) modified 3 code files
Marlin.h
Marlin_main.cpp
endstops.cpp
2) modified config files so I could test on my machine
Testing was done on an AzteegX3pro based machine.
The probe was hooked to the Z_MIN endstop.
My controller doesn't have a dedicated Z_PROBE input so I couldn't test
that functionality.
Verified that a large file (without any G38 commands) executed the same
before and after the changes.
Verified that the head moves as expected when G38.2 and G38.3 commands
are issued. Single & multiple axis moves were tested along with + and -
directions.
Code was added to the main ISR. In normal operation only one extra IF
statement is evaluated. I didn't notice any performance degradation
because of the added code.
The G38 commands are expected to be issued manually by the operator
during machine setup. The G38 commands wait until the machine is idle
before proceeding. That way the other commands are minimally impacted
by the extra ISR overhead when a G38 command is in the queue.
The G38 commands are very similar to the G28 commands except 1) only the
Z_PROBE is used and movement can be in the + or - direction.
See issue 4677 for a discussion on adding G38 commands to Marlin.
Feature request: add ability to use G38.2 command (CNC)
MarlinFirmware/Marlin#4677
2016-10-01 05:00:53 -05:00
Scott Lahteine
74d048e77e
Merge pull request #4927 from thinkyhead/rc_bltouch_noraise
...
Don't check Z_MAX on raise when the probe pwns the pin
2016-10-01 04:52:56 -05:00
Scott Lahteine
4afa293289
Say "BLTOUCH" in machine info report
2016-09-30 17:13:27 -05:00
Scott Lahteine
ed7d2694fc
Don't check Z_MAX on raise when the probe pwns the pin
2016-09-30 16:41:30 -05:00
Scott Lahteine
3bbdd48a4d
Merge pull request #4918 from thinkyhead/rc_abl_patchups
...
Fix up ABL - Add PROBE_Y_FIRST option. Arduino 1.6.8 required.
2016-09-29 15:29:01 -05:00
Scott Lahteine
fffc9fefa8
Apply changes to all configs
2016-09-29 02:17:33 -05:00
Scott Lahteine
587cb6c283
K8400 has 1xXY an 2xZ endstop plugs
2016-09-29 02:07:22 -05:00
Scott Lahteine
d234bc160e
Require Arduino 1.6.8 to compile
2016-09-29 02:00:27 -05:00
Scott Lahteine
2d2c9bdf92
Add PROBE_Y_FIRST option for probe order
2016-09-29 02:00:27 -05:00
Scott Lahteine
c8c57e59fc
Patch the end of G29 to sync plan position
2016-09-29 02:00:27 -05:00
Scott Lahteine
81b8c9f8ec
Add XY parameters to G29 for mesh dimensions
2016-09-29 02:00:27 -05:00
Scott Lahteine
56cf674150
M420 can now enable/disable ABL
2016-09-29 02:00:26 -05:00
Scott Lahteine
06790977c4
Use updated position methods
2016-09-29 01:31:05 -05:00
Scott Lahteine
e8f2604a6f
Patch print_bed_level numbering
2016-09-29 01:31:05 -05:00
Scott Lahteine
d066610514
Patch up bilinear_z_offset
2016-09-29 01:31:05 -05:00
Scott Lahteine
850e38d013
G30 will only disable bed leveling
2016-09-29 01:31:04 -05:00
Scott Lahteine
510ef5d14a
Standard function to turn bed leveling on/off
2016-09-29 01:27:37 -05:00
Scott Lahteine
ecf7cdde65
Augment planner/stepper getters/setters
2016-09-29 01:27:37 -05:00
Scott Lahteine
2febd8ec82
Double-touch debugging
2016-09-29 01:27:37 -05:00
Scott Lahteine
b331077c32
Use stepper.get_axis_position_degrees
2016-09-29 01:27:37 -05:00
Scott Lahteine
0d9efb24f3
Fix up bilinear_z_offset
2016-09-29 01:26:22 -05:00
jaysonkelly
3b3d282f8e
Adjusted values for Rigidboard Configuration
...
Rigidboard differs a little in configuration from the PrinterBoardRevF we modeled the code after.
2016-09-28 14:14:04 -05:00
Scott Lahteine
850259bb25
Watch bed temp also for Control menu item
2016-09-28 14:14:04 -05:00
esenapaj
92c03a44a9
Fix the PR #4899 (ABL: Enable by type. Bilinear for all.) etc.
...
About Configuration.h:
・Fix the PR #4899 (ABL: Enable by type. Bilinear for all.)
Remove Duplicated contents
・Fix the PR #4305 (Custom boot screen feature improvement)
Revert from "during boot" to "during bootup" in all the example
Configuration.h
・Fix the PR #4207 (Clean up, simplify and generalize the Allen-key-probe
code.)
Resolve and relocate the duplicated definitions in Z_PROBE_ALLEN_KEY
section
・Follow-up the PR #4805 (Additional documentation of Configuration.h)
Add forgotten changes to all the example Configuration.h
Adjust spacing
About Configuration_adv.h:
Add missing description of SLOWDOWN for DELTA
Adjust spacing
2016-09-28 14:14:04 -05:00
Rerouter
50e5ee4de4
Update Configuration.h
2016-09-28 17:38:09 +10:00
Rerouter
1a2f1d4974
Update temperature.cpp
2016-09-28 17:36:53 +10:00
Rerouter
a765c98850
Removal of the constraints of the Iterm
2016-09-28 17:26:49 +10:00
Scott Lahteine
8b46eb3766
Fix bilinear interpolation
2016-09-27 03:18:49 -05:00
Scott Lahteine
5100bdac81
Improve Bilinear Grid
...
- Extrapolate properly for even numbered grid points
- Extrapolate using average, not median
- Improve bilinear grid report output
- Add debug output for bilinear extrapolation
- Add option to extrapolate from edge, not center
2016-09-27 00:03:19 -05:00
Scott Lahteine
a3e91ec65e
Add 'Q' option to G29 when debug leveling is on
2016-09-27 00:03:19 -05:00
Scott Lahteine
1fceda4fb0
Add leveling type and details to machine_info
2016-09-27 00:03:19 -05:00
Scott Lahteine
e0e0166075
Fix auto bed leveling - turn on after successful G29
2016-09-27 00:03:19 -05:00
Scott Lahteine
18e40de39c
Adjust final Z after bilinear G29
2016-09-26 00:22:22 -05:00
Scott Lahteine
ea0dbee3c9
Enable ABL by type, support bilinear on cartesian
2016-09-25 23:35:37 -05:00
Scott Lahteine
9cebbabd05
Merge pull request #4893 from thinkyhead/rc_stat_led_check
...
Define status LED pins without condition
2016-09-25 18:50:47 -05:00
Scott Lahteine
5fff8d148b
Clean up digital pots and microsteps
2016-09-25 11:16:22 -05:00
Scott Lahteine
570676d265
Include requirements in "Implemented Codes"
2016-09-25 07:50:33 -05:00
Scott Lahteine
cb48292338
Use fastio for literal pins
2016-09-25 06:33:38 -05:00
Scott Lahteine
07703d2bd6
Use _PIN suffix on some pins
2016-09-25 06:33:38 -05:00
Scott Lahteine
203e519bf4
Sanity check for status LED pins
2016-09-25 06:33:38 -05:00
Scott Lahteine
ba43277429
Always define status LED pins
2016-09-25 06:33:37 -05:00
Scott Lahteine
ad691022d7
Fix up spacing in A4JP pins
2016-09-25 06:33:37 -05:00
Scott Lahteine
fba0b67f7d
Rename status led pins
2016-09-25 06:33:37 -05:00
Scott Lahteine
9d86c07702
Clean up some fastio.h spacing
2016-09-25 06:33:37 -05:00
Scott Lahteine
ab84ed22ca
No such thing as G6 and G7 pins
2016-09-25 05:28:22 -05:00
Scott Lahteine
c2f13be750
Mightyboard Revision E
2016-09-25 05:28:04 -05:00
Scott Lahteine
041d127cd3
Match bltouch test in do_homing_move with new code
2016-09-24 23:58:08 -05:00
Scott Lahteine
16461900c2
Fix for HEATERS_PARALLEL
2016-09-24 05:34:40 -05:00
Scott Lahteine
1583d37edd
Comment on M851 case
2016-09-24 05:34:36 -05:00
Scott Lahteine
076f3a8284
unsigned char => uint8_t
2016-09-24 05:23:40 -05:00
Scott Lahteine
8935bed594
MIDDLE_DEAD_ZONE => MIDDLE_DEAD_ZONE_R
2016-09-24 05:18:36 -05:00
Scott Lahteine
6cf0952bf9
Merge pull request #4887 from thinkyhead/rc_autumn_fixups
...
Improve MINIMUM_STEPPER_PULSE
2016-09-24 03:23:42 -05:00
Scott Lahteine
8061f1fac9
Merge pull request #4888 from thinkyhead/fix_warnings_etc
...
Suppress warnings, fix nonlinear_z_offset
2016-09-24 03:22:49 -05:00
esenapaj
7bdc58a818
Suppress warnings, fix nonlinear_z_offset
2016-09-24 03:06:08 -05:00
Scott Lahteine
eabff30e75
Improve MINIMUM_STEPPER_PULSE
2016-09-24 02:23:43 -05:00
esenapaj
3ed8f8331c
Update Japanese translation
...
・Add new translation
2016-09-24 09:24:38 +09:00
Scott Lahteine
da1644313d
Merge pull request #4883 from esenapaj/Follow-up-the-PR-#4860
...
Follow-up the PR #4860 (Fix BLTOUCH string and SERVO_DELAY)
2016-09-23 16:39:37 -05:00
Scott Lahteine
903b8bb60c
No need for auto_bed_leveling_was_enabled
2016-09-23 16:38:22 -05:00
esenapaj
ee60225c07
Follow-up the PR #4860 (Fix BLTOUCH string and SERVO_DELAY)
2016-09-24 06:18:27 +09:00
Scott Lahteine
0951bffcc0
Sanity check homing bumps
2016-09-23 15:39:02 -05:00
Scott Lahteine
a9a21db39f
No homing bump if bump distance is 0 (or less)
2016-09-23 15:39:02 -05:00
Scott Lahteine
2b4da57ea7
Patch Z safe homing for probe Z homing
2016-09-23 15:39:02 -05:00
Scott Lahteine
c6dd539c84
Print error for M42 bad pin
2016-09-23 15:39:02 -05:00
Scott Lahteine
8b399610fb
Skip raw moves to current position
2016-09-23 15:39:02 -05:00
Scott Lahteine
22ece0081e
Pass array pointer to unapply_leveling
2016-09-23 15:39:01 -05:00
Scott Lahteine
cbc158eb62
Add a proper flag for ABL enabled
2016-09-23 15:39:01 -05:00
Scott Lahteine
666e944336
Init xProbe/yProbe for compiler
2016-09-23 15:39:01 -05:00
Scott Lahteine
2c52e6ecf4
Clean up G28 MBL code
2016-09-23 15:39:01 -05:00
Scott Lahteine
0bf1054bb2
Patch do_homing_move for SCARA
2016-09-23 15:39:00 -05:00
Scott Lahteine
6ad0da661c
Report position in G92
2016-09-23 15:39:00 -05:00
Scott Lahteine
199a7b5dd5
Tweak SCARA debugging
2016-09-23 15:39:00 -05:00
Scott Lahteine
865ad25781
Fix prepare_kinematic_move_to precision
2016-09-23 15:39:00 -05:00
Scott Lahteine
85e607153b
Improve kinematic optimization options
2016-09-23 03:03:15 -05:00
Scott Lahteine
2846531f0b
const argument in do_homing_move
2016-09-23 03:03:15 -05:00
Scott Lahteine
cc639d7d9c
Less indentation in Stepper::isr
2016-09-23 03:03:14 -05:00
Scott Lahteine
7dec8071b2
Always synchronize in Stepper::set_position
2016-09-23 03:03:14 -05:00
Scott Lahteine
c6142aa2a1
Minor cleanups in Marlin_main.cpp
2016-09-23 03:03:14 -05:00
Scott Lahteine
0427f3cc3b
Use memcpy/memset in planner
2016-09-23 03:03:14 -05:00
Scott Lahteine
6b9bf8e8fe
Add Planner::sync_from_steppers
...
Use to sync the planner after an interrupted move (when not overriding
the logical position).
2016-09-23 03:03:14 -05:00
Scott Lahteine
be11a8a938
Fix debug in Planner::buffer_line
2016-09-23 03:03:13 -05:00
Scott Lahteine
b211df818e
Make movement functions more available
2016-09-23 03:03:13 -05:00
Scott Lahteine
6335acbf5c
Patch bug in linear unapply_leveling
2016-09-23 03:03:13 -05:00
Scott Lahteine
e8d5073a90
Use probe clearance for bump when homing Z with probe
2016-09-22 15:41:28 -05:00
Scott Lahteine
dbe41245f1
Merge pull request #4821 from thinkyhead/rc_revert_to_raises
...
Z Raise/Clearance rather than Height
2016-09-22 15:30:07 -05:00
Scott Lahteine
747a2257dd
Only deploy/stow BLTOUCH on downward move
2016-09-22 15:26:19 -05:00
Scott Lahteine
e242946ac3
Patch G29 for linear leveling, reachable with probe
2016-09-22 15:26:19 -05:00
Scott Lahteine
b800eb0fed
Add probe option to position_is_reachable
2016-09-22 15:26:19 -05:00
Scott Lahteine
fafafcf9d1
Use unapply_leveling in set_current_from_steppers_for_axis
2016-09-22 15:26:18 -05:00
Scott Lahteine
e69d1e2879
Homing/probing feedrate, comments
2016-09-22 15:26:18 -05:00
Scott Lahteine
7d72ed688c
Revert motor_current_setting to constexpr
...
We should use `constexpr` wherever it makes sense, for its added benefits. See http://stackoverflow.com/questions/13346879/const-vs-constexpr-on-variables
2016-09-22 15:26:18 -05:00
Scott Lahteine
145d9005d1
Fix BLTOUCH string and SERVO_DELAY
2016-09-21 01:45:23 -05:00
Scott Lahteine
2b7cc27c37
Merge pull request #4840 from thinkyhead/rc_G2_G3_arc_r_method
...
Add support for G2/G3 with R parameter
2016-09-21 01:30:37 -05:00
Scott Lahteine
e0e10e0e45
Merge pull request #4859 from thinkyhead/rc_kinematic_and_scara
...
Kinematic and SCARA patches
2016-09-21 01:21:49 -05:00
Scott Lahteine
31f03c838a
Only deploy/stow BLTouch for Z axis
2016-09-21 00:54:54 -05:00
Scott Lahteine
3913e04ac7
Add Delta kinematic optimization options
2016-09-20 18:48:06 -05:00
Scott Lahteine
8e31640229
Optimize prepare_kinematic_move_to
2016-09-20 18:48:06 -05:00
Scott Lahteine
fd9b8ae4d4
Use position_is_reachable in G29, M48
2016-09-20 18:48:06 -05:00
Scott Lahteine
7194e4434f
SCARA support in position_is_reachable
2016-09-20 18:48:06 -05:00
Scott Lahteine
1c5f9821c4
SCARA support in homeaxis
2016-09-20 18:48:05 -05:00
Scott Lahteine
92b4459f6c
Simpler G92 for SCARA
2016-09-20 18:48:05 -05:00
Scott Lahteine
46cc2e3f6a
Fix get_cartesian_from_steppers
2016-09-20 18:31:36 -05:00
Scott Lahteine
435c3ed404
Patch SCARA_move_to_cal for coordinate space
2016-09-20 18:31:36 -05:00
Scott Lahteine
5efb12e889
Simpler report_current_position for SCARA
2016-09-20 18:31:36 -05:00
Scott Lahteine
83fc5e1540
No line_to_* functions with IS_KINEMATIC
2016-09-20 18:31:36 -05:00
Scott Lahteine
59d39d7655
G0 direct move for SCARA
2016-09-20 18:31:36 -05:00
Scott Lahteine
ad9d6870ed
SCARA support in do_blocking_move_to
2016-09-20 18:31:36 -05:00
Scott Lahteine
8542ebcecd
prepare_move_to_destination_raw => prepare_uninterpolated_move_to_destination
2016-09-20 18:31:36 -05:00
Scott Lahteine
f900f97611
Update sw endstops in set_axis_is_at_home
2016-09-20 18:31:36 -05:00
Scott Lahteine
0d43cef1de
M206 for MORGAN_SCARA
2016-09-20 18:31:36 -05:00
Scott Lahteine
e94cb7a380
MORGAN_SCARA kinematics
2016-09-20 18:31:36 -05:00
Scott Lahteine
890bade2fa
Additions, mods to SCARA config
2016-09-20 18:31:36 -05:00
Scott Lahteine
01f1028510
Try on "CLEARANCE" for size
2016-09-20 18:29:49 -05:00
Scott Lahteine
0e7d638a7a
Revert to Probe Raise rather than Probe Height
2016-09-20 18:29:49 -05:00
Scott Lahteine
51e42a2d77
Adjust BLTouch probe behavior
...
Addressing #4855
- Have the pin deploy only immediately before probing
- Have the pin retract immediately after every probe
2016-09-20 16:20:36 -05:00
Scott Lahteine
13523cbf29
Fix and extend BLTouch support
2016-09-20 16:20:36 -05:00
Scott Lahteine
5cbed13f41
'constexpr' => 'const' for PWM_MOTOR_CURRENT
2016-09-20 15:57:48 -05:00
Scott Lahteine
7ae351c92f
Merge pull request #4842 from thinkyhead/rc_DISABLE_Z_MIN_PROBE_ENDSTOP_whassup
...
Drop DISABLE_Z_MIN_PROBE_ENDSTOP, clean up probe config
2016-09-20 12:16:51 -05:00
Scott Lahteine
ba94c89e21
Merge pull request #4852 from esenapaj/Fix-for-advance-extrusion-algorithms
...
Fix for advance extrusion algorithms
2016-09-20 11:33:14 -05:00
esenapaj
954563d603
Adjust spacing
2016-09-20 19:35:44 +09:00
esenapaj
7e9576dc5b
Extend the e_steps[] from int to long for allowing more than 32,767 E steps
...
Probably needed for long straight lines when using high microstepping
2016-09-20 19:35:44 +09:00
esenapaj
b04ed8f9c3
Fix inverted stepper signal of ADVANCED and LIN_ADVANCED
2016-09-20 19:35:44 +09:00
esenapaj
8692748ecd
Fix broken direction signal of ADVANCED and LIN_ADVANCED
...
Remove a setting proccess of E direction in advance_isr()
2016-09-20 19:35:44 +09:00
Scott Lahteine
e9ce42353e
Patch G29 for 3-point leveling
2016-09-20 04:46:41 -05:00
Scott Lahteine
c2744d8a8b
Add support for G2/G3 with R parameter
2016-09-19 00:35:09 -05:00
Scott Lahteine
e05af606a8
Clean up probe config options
2016-09-19 00:26:16 -05:00
Scott Lahteine
153e240cdd
Probe conditionals to Conditionals_LCD.h
2016-09-19 00:25:53 -05:00
Scott Lahteine
ff38a3c3b1
Use SD Detect Pin 53 for 3DRAG, K8200, and K8400
...
See #4316
2016-09-18 23:46:09 -05:00
Scott Lahteine
f38a33a5d8
Add handling of BLTouch error state
2016-09-18 22:00:32 -05:00
Scott Lahteine
c4dcfa254e
Allow override of Z_ENDSTOP_SERVO_NR with BLTOUCH
2016-09-18 22:00:32 -05:00
Scott Lahteine
7d9ebda478
Remove redundant servo probe sanity check
2016-09-18 21:46:18 -05:00
Scott Lahteine
f0beae7641
Fix stupid, stupid, stupid oversight in G29 update
...
Mea culpa!
2016-09-18 16:24:47 -05:00
Scott Lahteine
77639672d7
Move NONLINEAR bed leveling to planner
...
This is in advance of moving non-linear bed leveling to the planner
class.
2016-09-18 13:50:38 -05:00
Scott Lahteine
9429c7db89
Use ABC indices in delta[]
2016-09-18 13:50:38 -05:00
Scott Lahteine
5f2f991192
Use 'logical' rather than 'target' or 'cartesian'
2016-09-18 13:50:38 -05:00
Scott Lahteine
40d3e854f6
Remove redundant extern delta[]
2016-09-18 13:39:47 -05:00
Scott Lahteine
2ebfbc4c8d
Merge pull request #4836 from thinkyhead/rc_some_comments
...
Some comments, const args, debug output tweaks
2016-09-18 13:38:07 -05:00
Scott Lahteine
e5505e3b33
Allow non-square leveling grid
2016-09-18 13:11:20 -05:00
Scott Lahteine
2fc9ad6657
Use const ref args in probe_pt
2016-09-18 12:58:43 -05:00
Scott Lahteine
2c2688d7ad
Adjust comments, spacing
2016-09-18 12:58:42 -05:00
Scott Lahteine
b9d19b0008
Tweak extrapolate_one_point
2016-09-18 12:58:42 -05:00
Scott Lahteine
3c0b591935
Fix nozzle position description
2016-09-18 12:58:42 -05:00
Scott Lahteine
18d8dd4c0f
set_current_from_steppers_for_axis const arg
2016-09-18 12:58:42 -05:00
Scott Lahteine
edfaf1c582
Stepper::report_positions patch
2016-09-18 12:58:42 -05:00
Scott Lahteine
d1f4c3d73b
Patch sync_plan_position comment
2016-09-18 12:58:41 -05:00
Scott Lahteine
0c25af30d4
Document homeaxis
2016-09-18 12:58:41 -05:00
Scott Lahteine
e7882e45e3
Document set_axis_is_at_home
2016-09-18 12:58:40 -05:00
Scott Lahteine
fef959c31a
Merge pull request #4834 from thinkyhead/rc_code_bool
...
Standardize code_value_bool
2016-09-18 12:44:20 -05:00
Scott Lahteine
07ac9a1152
Merge pull request #4822 from blubbfish/patch-3
...
Tweak some german language strings
2016-09-18 11:38:22 -05:00
Scott Lahteine
661fe09ce7
Standardize code_value_bool
2016-09-18 11:32:32 -05:00
Scott Lahteine
20e5140e75
Merge pull request #4833 from thinkyhead/rc_no_scara_axis_scaling
...
Remove SCARA axis_scaling
2016-09-18 11:31:50 -05:00
Scott Lahteine
a501f430eb
Enable M0/M1 with Emergency Parser
2016-09-18 11:14:10 -05:00
Philip Schell
cd8b22b527
Tweak some german language strings
...
Change some string to get a better wording in german
2016-09-16 22:29:39 +02:00
Scott Lahteine
83a41c7ceb
Remove SCARA axis_scaling
2016-09-16 15:21:18 -05:00
Scott Lahteine
d41eeb62af
Merge pull request #4781 from thinkyhead/rc_final_z_correction
...
Use simplified Z correction in G29 when possible
2016-09-16 15:14:19 -05:00
Scott Lahteine
502150046c
Merge pull request #4805 from thinkyhead/rc_config_adjustment
...
Additional documentation of Configuration.h
2016-09-16 15:13:20 -05:00
Scott Lahteine
a1812b55f6
Space out array values
2016-09-16 14:41:05 -05:00
Scott Lahteine
d4599fd8ed
Comment patches to Configuration.h
2016-09-16 14:41:05 -05:00
Scott Lahteine
723e983073
Default EXTRUDE_MAXLENGTH to 200mm
2016-09-16 14:41:04 -05:00
Scott Lahteine
b08bd84f8e
Merge pull request #4806 from blubbfish/patch-2
...
Update language_de.h
2016-09-16 14:39:20 -05:00
darrelhunt
7b8bfa4358
Update pins_TEENSYLU.h
2016-09-16 11:26:37 -07:00
darrelhunt
829c8592f2
Update pins_TEENSY2.h
2016-09-16 11:26:09 -07:00
darrelhunt
e0aee20327
Update pins_SAV_MKI.h
2016-09-16 11:25:42 -07:00
darrelhunt
88d3fc0bcf
Update pins_PRINTRBOARD.h
2016-09-16 11:25:14 -07:00
darrelhunt
4277221abb
Update pins_BRAINWAVE_PRO.h
2016-09-16 11:24:32 -07:00
darrelhunt
b8ecbe9116
Update pins_BRAINWAVE.h
2016-09-16 11:23:52 -07:00
darrelhunt
60f757077e
Update pins_5DPRINT.h
2016-09-16 11:22:52 -07:00
Silvio Didonna
ff2b2d5939
Added missing translations
2016-09-16 01:17:58 +02:00
Philip Schell
2b11c3274c
Update language_de.h
2016-09-15 15:16:11 +02:00
Philip Schell
54e6d12382
Update language_de.h
...
@MarlinFirmware/language-team updated german languagefile to the latest english version
2016-09-14 14:17:21 +02:00
Scott Lahteine
57564ae576
Use last probe point to correct Z when possible
2016-09-14 02:03:43 -05:00
Scott Lahteine
e40646de42
Merge pull request #4803 from thinkyhead/rc_lcd_button_fix
...
Clear LCD button state, apply timer to all
2016-09-13 18:03:39 -05:00
Scott Lahteine
29f224594c
Fix some regressive typos in G29
2016-09-13 17:31:02 -05:00
Scott Lahteine
5ecc7d9f25
Clear LCD button state, apply timer to all
...
Addressing #3007
2016-09-13 16:10:27 -05:00
Scott Lahteine
9b0931ef74
Apply fixed EXTRUDER_RUNOUT_PREVENT
2016-09-13 03:33:04 -05:00
Scott Lahteine
b1a60e8954
Reformat, rearrange, tweak, and document
...
- Add comments to several functions
- Add an option to use Fast SQRT for Delta IK
- Group related functions together
- Outdent some leveling-related functions
2016-09-13 03:33:04 -05:00
Scott Lahteine
61284cbd8c
Various code style adjustments
2016-09-13 03:33:04 -05:00
Scott Lahteine
788a16fc46
Clean up serial out code
2016-09-13 03:33:03 -05:00
Scott Lahteine
0e38bea79d
Shrink 3-point leveling code
2016-09-13 03:33:03 -05:00
Scott Lahteine
4f75ce6957
Unify reset_bed_level for linear/non-linear
2016-09-13 03:33:03 -05:00
Scott Lahteine
41d8149bce
Sanity check for more than 1 controller
2016-09-13 03:33:02 -05:00
Scott Lahteine
40785ce8ac
Use count method for kinematic sanity check
2016-09-13 03:33:02 -05:00
Scott Lahteine
3236762e07
Clean up sanity check for LCD_PROGRESS_BAR
2016-09-13 03:33:02 -05:00
Scott Lahteine
a9ed23225f
bed_level => bed_level_grid
2016-09-13 03:33:02 -05:00
Scott Lahteine
82be65065c
Fix up untilted_stepper_position and set_current_from_steppers_for_axis
2016-09-13 03:33:01 -05:00
Scott Lahteine
d65f5d816f
Patch to fix kinematics
2016-09-13 03:33:01 -05:00
Scott Lahteine
e529c6407e
Rename set_cartesian_from_steppers, cartesian_position
2016-09-13 03:33:01 -05:00
Scott Lahteine
c109399bf6
Fix planner leveling and rename arguments
...
Use lx, ly, lz for “logical” positions
2016-09-13 03:33:01 -05:00
Scott Lahteine
d4f21af6b3
sync_plan_position_delta => sync_plan_position_kinematic
2016-09-13 03:33:01 -05:00
Scott Lahteine
acd1b6e9c0
Rename delta_grid spacing for general nonlinear
2016-09-13 03:33:00 -05:00
Scott Lahteine
c5fa70809b
Implement M0/M1 for EMERGENCY_PARSER
2016-09-13 03:33:00 -05:00
Scott Lahteine
786d1afb72
Add position_is_reachable, use in home_z_safely
2016-09-13 03:33:00 -05:00
Scott Lahteine
b4034915f8
Move z safe homing to its own function
2016-09-13 03:33:00 -05:00
Scott Lahteine
c84b14c77a
Move delta homing to its own function
2016-09-13 03:32:59 -05:00
Scott Lahteine
f9a192c7e3
Move setup() and loop() to the end
2016-09-13 03:32:59 -05:00
Scott Lahteine
8ff338c2b9
Patch stepper.h for SCARA
2016-09-13 03:32:59 -05:00
Scott Lahteine
74d7f5e57b
Patch SCARA example config
2016-09-13 03:32:59 -05:00
Scott Lahteine
6ab54c60b1
Add conditionals for kinematics, leveling
2016-09-13 03:32:59 -05:00
Scott Lahteine
21514568fd
Add enum for ALL_AXES
2016-09-13 03:32:58 -05:00
Scott Lahteine
413b61e64a
Add HYPOT2 and float comparison macros
2016-09-13 03:32:58 -05:00
Scott Lahteine
a6f6ed352b
Fix comment on FILAMENT_RUNOUT_SENSOR
2016-09-13 02:14:34 -05:00
Scott Lahteine
48e14d049a
Merge pull request #4710 from thinkyhead/rc_fix_leveling_maths
...
Bed leveling that accounts for home XYZ
2016-09-10 15:47:39 -05:00
Scott Lahteine
416821a71c
Merge pull request #4765 from thinkyhead/rc_endstop_direction
...
Sanitycheck endstop plugs based on homing direction
2016-09-10 14:49:50 -05:00
Scott Lahteine
9248cfb0ad
Bed leveling that accounts for home XYZ
2016-09-10 13:47:21 -05:00
Scott Lahteine
6ac9d895ca
Tweak Filament Width variables
2016-09-10 13:29:25 -05:00
Scott Lahteine
68ba45572e
Don't say "heating complete" unless done
2016-09-10 13:29:25 -05:00
Scott Lahteine
2bfc6fe1b0
Move XYZ constants closer to the top
2016-09-10 13:25:44 -05:00
Scott Lahteine
12b94e419f
Sanitycheck endstop plugs based on homing direction
2016-09-08 13:56:32 -05:00
Scott Lahteine
29c4f67a29
Additional path - followup to #4743
2016-09-07 15:08:12 -05:00
Robert Bartl
494d5770b8
makefile fix for arduino 1.6.9 unzipped
2016-09-03 19:45:27 -05:00
Scott Lahteine
6f71bd7372
Merge pull request #4754 from thinkyhead/rc_mixing_regression
...
Unify counter_m and counter_M
2016-09-02 12:27:43 -05:00
Scott Lahteine
9bf78ef465
Fix capitalization of counter_m
2016-09-02 11:31:45 -05:00
Scott Lahteine
42b5616327
Try bool for direction instead of long
2016-09-02 11:28:48 -05:00
Scott Lahteine
cbe9ab902c
Merge pull request #4747 from thinkyhead/rc_sd_show_percent
...
Option to show SD percent on Graphical LCD
2016-09-02 07:44:42 -05:00
Scott Lahteine
f20b2b21eb
Optimize LCD string/char printing
2016-09-02 06:41:24 -05:00
Scott Lahteine
3b2f7ba225
Merge pull request #4748 from thinkyhead/rc_sd_print_timer
...
Patch duration_t toDigital method
2016-09-02 04:41:11 -05:00
Kai
445d8215e4
Option to show SD percent on Graphical LCD
2016-09-02 02:17:36 -05:00
Scott Lahteine
d07a913f21
Tweak to stepper advance e_steps update
2016-09-02 02:06:17 -05:00
Scott Lahteine
aaef7c6b89
Fix a misspelling of minimum
2016-09-02 01:42:38 -05:00
Scott Lahteine
ad659b5f91
Merge pull request #4725 from thinkyhead/rc_log_machine_info
...
Log machine info in G28 and G29
2016-09-01 23:58:59 -05:00
Scott Lahteine
c6859a1e54
Handle hours >= 100
2016-09-01 23:54:48 -05:00
Kai
9f706a9635
Patch duration_t toDigital method
2016-09-01 23:34:15 -05:00
Scott Lahteine
c3caa42630
Merge pull request #4738 from thinkyhead/rc_ensure_floats
...
Optimize stepper ISRs, plus cleanup, shorthand
2016-09-01 14:36:22 -05:00
Scott Lahteine
426f662586
Apply MINIMUM_STEPPER_PULSE in stepper advance_isr
2016-08-30 14:31:48 -05:00
Scott Lahteine
8c7ee4599e
Optimize stepper advance_isr
2016-08-30 14:31:48 -05:00
Scott Lahteine
9725bcd099
Minor "optimizations" in stepper ISR
2016-08-30 14:21:43 -05:00
Scott Lahteine
4ec3d1ea58
Add some commentary to stepper ISR
2016-08-30 14:21:15 -05:00
Scott Lahteine
d9bcc7bb45
Set a bool when a stepper block is done
2016-08-30 14:20:48 -05:00
Scott Lahteine
08f717e5f7
Use bit-size typedefs for some stepper vars
2016-08-30 14:19:49 -05:00
Scott Lahteine
d554c1dda8
Clean up planner kernel pass methods
2016-08-30 14:16:13 -05:00
Scott Lahteine
b2e5ec85d7
Add [XYZ]_CENTER conditionals
2016-08-30 14:15:41 -05:00
Scott Lahteine
7e20448a2d
Add HOMING_Z_WITH_PROBE conditional
2016-08-30 13:29:26 -05:00
Scott Lahteine
0e4107da34
Minor cleanup of homeaxis, etc.
2016-08-30 13:29:26 -05:00
Scott Lahteine
f1201e11c7
Improve the Jerk description
2016-08-29 12:39:21 -05:00
Scott Lahteine
3f038bef00
Heading for movement settings
2016-08-29 02:01:34 -05:00
Scott Lahteine
fd2269f489
Log machine info in G28 and G29
2016-08-28 20:48:28 -05:00
Scott Lahteine
6eaf4f4909
Fix spacing of debug output in homeaxis
2016-08-28 19:43:33 -05:00
Scott Lahteine
1e6d1c39ea
Improve verbiage of dropsegments sanity error
2016-08-28 19:40:32 -05:00
Scott Lahteine
0729a8f08d
Use the probe travel height for pre-probe move
...
Instead of using the home_bump for Z to move close to the bed before doing a slow probe, use the probe travel height.
2016-08-28 19:13:08 -05:00
Scott Lahteine
dd94d0b9d5
Fix bed probing bug without PROBE_DOUBLE_TOUCH
...
If `PROBE_DOUBLE_TOUCH` wasn't enabled, the probe move could be way too short! See #4701 for example.
2016-08-28 19:00:25 -05:00
Scott Lahteine
35a0c46f16
Tweak debug output for probe in G29
2016-08-28 18:44:44 -05:00
Scott Lahteine
a82a89bc58
Merge pull request #4722 from thinkyhead/rc_minimum_stepper_pulse
...
MINIMUM_STEPPER_PULSE option
2016-08-28 10:03:32 -05:00
Scott Lahteine
a2572d2854
Fix Danish encoding and an error message
2016-08-28 09:51:06 -05:00
Scott Lahteine
759234af60
MINIMUM_STEPPER_PULSE option
2016-08-27 23:58:40 -05:00
Scott Lahteine
2cb63f0bf7
Merge pull request #4719 from thinkyhead/rc_delta_homing_patch
...
Marlin patches for homing, esp. Delta
2016-08-27 20:46:50 -05:00
Scott Lahteine
8241cf9901
Merge pull request #4720 from thinkyhead/rc_allow_stepper_omission
...
Patch stepper.cpp to allow omitting steppers
2016-08-27 20:36:22 -05:00
Scott Lahteine
7e893f4309
Merge pull request #4721 from thinkyhead/rc_temperature_isr_comments
...
Rc temperature isr comments
2016-08-27 20:36:03 -05:00
Scott Lahteine
73d86098b7
Marlin patches for homing, esp. Delta
2016-08-27 20:32:05 -05:00
Scott Lahteine
338bc768b1
Merge pull request #4717 from thinkyhead/rc_log_the_probe
...
Debug logging of nozzle type and offsets
2016-08-27 20:24:19 -05:00
Scott Lahteine
fae92e3f3c
Merge pull request #4718 from thinkyhead/rc_twibus_patch_20160827
...
TWIBus patch for proper use of Wire.requestFrom
2016-08-27 20:22:53 -05:00
Scott Lahteine
a485a19052
Added optional planner logging
2016-08-27 20:12:22 -05:00
Scott Lahteine
e9bfca5870
Additional comments for Temperature::isr
2016-08-27 20:12:22 -05:00
Scott Lahteine
a255945f29
Add DEBUG_ALL enum
2016-08-27 20:12:22 -05:00
Scott Lahteine
a28e15399f
Patch stepper.cpp to allow omitting steppers
2016-08-27 20:11:17 -05:00
Scott Lahteine
2b226bc5c2
TWIBus patch for proper use of Wire.requestFrom
2016-08-27 20:09:28 -05:00
Scott Lahteine
d641344d3a
Remove redundant probe offset in homing
2016-08-27 19:58:56 -05:00
Scott Lahteine
fb19a3cdec
Merge pull request #4649 from thinkyhead/rc_boelle_danish_update
...
Danish update (18 Aug 2016)
2016-08-27 19:06:05 -05:00
Scott Lahteine
00638131e5
Debug logging of nozzle type and offsets
2016-08-27 15:21:01 -05:00
Scott Lahteine
8e9ac72191
Merge pull request #4709 from thinkyhead/rc_log_the_reason
...
Log whether homing with probe or endstop
2016-08-26 17:05:55 -05:00
Scott Lahteine
991a34aff2
Log whether homing with probe or endstop
2016-08-26 15:50:10 -05:00
Scott Lahteine
3b93b79f5c
Merge pull request #4703 from bgort/RCBugFix
...
Add note suggesting RAMBo users use the RAMBo board type or platformio environment
2016-08-26 14:53:56 -05:00
Scott Lahteine
00cdb15cec
Move invariant LCD strings to language.h
2016-08-26 02:48:57 -05:00
Bo Herrmannsen
d2ae5b00d9
Danish up to date (18 Aug 2016)
2016-08-26 02:48:57 -05:00
Scott Lahteine
e78274a7f4
Consistent order/formatting of pins files
2016-08-25 20:59:45 -05:00
Scott Lahteine
11e9530111
Properly handle probe pin for BQ printers
2016-08-25 20:59:44 -05:00
Scott Lahteine
1968983f35
Move PROBE_SELECTED to an earlier point
2016-08-25 20:59:44 -05:00
Brian
2fae32f35f
Add note suggesting RAMBo users use the RAMBo board type or platformio environment;
...
Add note that Viki 2.0 wiring diagram v1.2 has a mistake in it;
2016-08-25 15:05:29 -04:00
esenapaj
1749a7fae3
Suppress warning
2016-08-24 00:18:06 +09:00
Scott Lahteine
d07d85ac9f
Ensure probe points at the delta edge are kept
2016-08-23 05:09:56 -05:00
AnHardt
7e36b76af2
Repair MarlinSerial with TX-buffer
...
These '{' are important to avoid the redefinition of `unsigned char _sreg = SREG;`
at the same level.
Used in
```
#define CRITICAL_SECTION_START unsigned char _sreg = SREG; cli();
```
2016-08-22 23:40:09 +02:00
Gege2B
1e65f1a1d8
Update french language
2016-08-22 12:46:58 -05:00
Scott Lahteine
ab59280075
MIN_SEGMENTS_FOR_MOVE => MIN_STEPS_PER_SEGMENT
...
Follow-up to #4666
2016-08-21 08:56:03 -05:00
Scott Lahteine
27b80b1dd1
Merge pull request #4667 from thinkyhead/rc_M211_sw_endstop_switch
...
M211: Enable/Disable Software Endstops
2016-08-21 06:44:00 -05:00
Scott Lahteine
14a03727e1
Tweak serialprintPGM
2016-08-21 00:10:09 -05:00
Scott Lahteine
2f223b8c79
Use ABC and XYZ for "3"
2016-08-21 00:10:08 -05:00
Scott Lahteine
4cd1ad8f28
Adjustments to M209, G28, M605
2016-08-21 00:10:08 -05:00
Scott Lahteine
e354cf5884
Apply sw_endstops_enabled to manual move
2016-08-21 00:10:08 -05:00
Scott Lahteine
280534c06f
Add M211: Enable/Disable Software Endstops
2016-08-21 00:10:08 -05:00
Scott Lahteine
01d4703429
PREVENT_DANGEROUS_EXTRUDE => PREVENT_COLD_EXTRUSION
...
Also improve the documentation of this and related options, and set
EXTRUDE_MINTEMP to 170 everywhere.
2016-08-20 23:35:27 -05:00
Scott Lahteine
a1f6cf1e5d
Merge pull request #4665 from thinkyhead/rc_lcd_not_ultipanel
...
Clean up ultralcd code, dependencies on ULTIPANEL
2016-08-20 22:43:17 -05:00
Scott Lahteine
1a255afa36
Merge pull request #4666 from thinkyhead/rc_dropsegments_adj
...
dropsegments => MIN_SEGMENTS_FOR_MOVE
2016-08-20 22:42:16 -05:00
Scott Lahteine
374f8d2014
dropsegments => MIN_SEGMENTS_FOR_MOVE
2016-08-20 18:52:15 -05:00
Scott Lahteine
76c3f326ff
Clean up DOGM code, comments
2016-08-20 18:33:12 -05:00
Scott Lahteine
71319adbb8
Wrap ULTIPANEL-dependent code
2016-08-20 18:33:11 -05:00
Scott Lahteine
305913545e
Move number-to-string function to utility.*
2016-08-20 18:33:11 -05:00
Scott Lahteine
394c80c87b
Merge pull request #4655 from thinkyhead/rc_serial_static
...
Optimize, reduce size of MarlinSerial
2016-08-20 15:51:57 -05:00
MagoKimbra
28d1e5a946
Fix_Zig_Zag
2016-08-20 11:28:08 +02:00
Scott Lahteine
14395a1a96
Optimize, reduce size of MarlinSerial
2016-08-19 16:53:20 -05:00
Scott Lahteine
4d4c00d69c
Merge pull request #4651 from thinkyhead/rc_homing_vs_leveling_z
...
Improvements to homing / leveling
2016-08-19 15:45:49 -05:00
Brian Gortney
8fae3e1f9f
Add Rambo support/env to platformio.ini; properly maps extended pins
2016-08-19 07:11:23 -04:00
Scott Lahteine
12d72363cb
Do Delta radius check without sqrt
2016-08-19 05:05:48 -05:00
Scott Lahteine
044f800be9
Use SERIAL_PROTOCOLLNPGM in G28
2016-08-19 04:45:33 -05:00
Scott Lahteine
d309a9647d
Include probe offset for moving "close to the bed"
2016-08-19 04:45:33 -05:00
Scott Lahteine
35a08eeaeb
Use Z_HOME_DIR over axis_home_dir where we can
2016-08-19 04:45:32 -05:00
Scott Lahteine
99b22d5785
Default AUTO_BED_LEVELING_GRID_POINTS to 3
2016-08-19 04:45:32 -05:00
Scott Lahteine
9b1f3f7d12
Sanity-check DELTA + AUTO_BED_LEVELING_GRID_POINTS
2016-08-19 04:45:32 -05:00
Scott Lahteine
733453569b
Merge pull request #4650 from thinkyhead/rc_percent_is_percent
...
extruder_multiplier => flow_percentage
2016-08-19 04:38:18 -05:00
Scott Lahteine
55355a4fb8
Make probed points more symmetrical
2016-08-19 04:32:03 -05:00
Scott Lahteine
1f776f6034
Tweak some code comments
2016-08-19 04:32:02 -05:00
Scott Lahteine
748228cf40
Use named indices for delta_grid_spacing
2016-08-19 04:32:02 -05:00
Scott Lahteine
ead333e7da
line_to_axis_pos => do_homing_move
2016-08-19 04:32:02 -05:00
Scott Lahteine
7a4ccd7967
Add do_probe_move with Z fixes
2016-08-19 04:32:02 -05:00
Scott Lahteine
a1bad589c9
Augment debug/homing logging
2016-08-19 04:32:02 -05:00
Scott Lahteine
41b5c48129
Update software endstops if EEPROM is loaded
2016-08-19 04:32:01 -05:00
Scott Lahteine
628dcbc764
extruder_multiplier => flow_percentage
2016-08-18 22:13:47 -05:00
Jason Westervelt
d222ee4de2
Update language_ru.h
...
Updated missing translations. Caught up on change to MSG_HOME.
2016-08-17 13:55:44 -07:00
Scott Lahteine
d63b8e2b2b
Additional details for I2C_SLAVE_ADDRESS
2016-08-15 19:27:53 -07:00
Scott Lahteine
7427290d3a
Merge pull request #4634 from thinkyhead/rc_lang_disp_char
...
Set language display charset in language.h
2016-08-15 19:25:56 -07:00
Scott Lahteine
aa30550b21
Keep SIMULATE_ROMFONT only language.h
2016-08-15 19:11:31 -07:00
Scott Lahteine
cec61c350d
Set language display charset in language.h
2016-08-15 19:01:12 -07:00
Scott Lahteine
165d7abb1b
Merge pull request #4625 from thinkyhead/rc_i2c_request_capture_flush
...
Add request, capture, flush to TWIBus
2016-08-15 18:15:43 -07:00
RicardoGA
507784b846
Fix Messages length
2016-08-15 10:30:51 -05:00
Scott Lahteine
bd928a69ec
Add request, capture, flush to TWIBus
2016-08-15 00:04:20 -07:00
RicardoGA
7b7f319ed5
Update Spanish Lenguage
...
Adds missing messages
2016-08-14 23:30:43 -05:00
Scott Lahteine
132322e4d9
Fix #4614 : currentScreen only defined with ULTIPANEL
2016-08-14 00:29:46 -07:00
Scott Lahteine
dcd26b0403
Merge pull request #4621 from thinkyhead/rc_fan_set_output
...
Init PWM-able AUTO_FAN pins with SET_OUTPUT
2016-08-13 21:22:27 -07:00
Scott Lahteine
79ba983782
Allow reply() to use const string with no warning
2016-08-13 21:05:44 -07:00
Scott Lahteine
3a0a94b21a
Always init configured fan pins
2016-08-13 20:38:40 -07:00
Scott Lahteine
c63003ed3e
Use matching auto-fan flags
2016-08-13 20:38:40 -07:00
Scott Lahteine
3475fd7b0f
Init PWM-able auto fan pins with SET_OUTPUT
2016-08-13 20:38:40 -07:00
Scott Lahteine
abf9696db1
Loop fan-pins based on array size
2016-08-13 20:05:32 -07:00
Scott Lahteine
e88575c8ec
Init next_auto_fan_check_ms to zero
2016-08-13 20:05:32 -07:00
Scott Lahteine
7272ec5608
Update HAS_FAN flags for 4 auto fans
2016-08-13 20:05:32 -07:00
Scott Lahteine
7b21811a9a
Flags for matching auto-fans
2016-08-13 20:05:32 -07:00
Scott Lahteine
97e0aed304
Further refinements of TWIBus
2016-08-13 18:32:41 -07:00
Scott Lahteine
38fa1b1939
Merge pull request #4196 from cimbalo/Platformio_support
...
Add working PlatformIO support
2016-08-12 17:32:09 -07:00
Scott Lahteine
d7edc039af
Merge pull request #4605 from thinkyhead/rc_3drag_fan_is_8
...
Fixup 3DRAG pins based on updated RAMPS pins
2016-08-12 17:30:27 -07:00
Silvio
923388e0c7
Fix acceleration and feedrate following bq/Marlin
2016-08-12 15:42:20 +02:00
Scott Lahteine
405afec393
Include decimeters in filamentUsed display
2016-08-12 05:16:43 -07:00
Scott Lahteine
fef0e8ba86
Merge pull request #4610 from thinkyhead/rc_sd_pause_and_stop
...
Fix stopSDPrint so it works when paused
2016-08-12 04:09:22 -07:00
Scott Lahteine
192ac2dfd7
Squish some CardReader code
2016-08-12 03:32:42 -07:00
Scott Lahteine
61932b859e
Fix bug in CardReader::stopSDPrint
...
If the SD print is paused, it cannot be stopped
2016-08-12 03:21:10 -07:00
Scott Lahteine
9e5d5a3b7c
Merge pull request #4597 from tnw513/italian_fix
...
Added hyphenated strings for full graphic display
2016-08-12 02:37:53 -07:00
Silvio Didonna
f999292eea
added hyphenated letters for full graphic display and fixed some strings
2016-08-12 08:57:22 +02:00
Scott Lahteine
67f119d18b
Add an i2c request handler
2016-08-11 18:09:18 -07:00
Scott Lahteine
2d3db5b5bd
Fixup pins_3DRAG based on updated RAMPS pins
2016-08-11 15:49:47 -07:00
Scott Lahteine
d29a64d4b3
Merge pull request #4603 from thinkyhead/rc_less_MSG_MOVE
...
Strip never-translated strings from language files
2016-08-11 14:21:58 -07:00
Scott Lahteine
d6a7ca6553
Merge pull request #4584 from thinkyhead/rc_delta_cal_more
...
Use configured feedrates, center in DELTA_CALIBRATION_MENU
2016-08-11 14:04:05 -07:00
Scott Lahteine
d3b432adca
Strip never-translated strings from language files
2016-08-11 13:41:07 -07:00
Scott Lahteine
1a558ef486
Tweak MarlinSerial precursor
2016-08-11 12:47:06 -07:00
Scott Lahteine
802818f7ab
Cleanup SdFatUtil.h
2016-08-11 12:47:06 -07:00
Scott Lahteine
52560e257f
Merge pull request #4595 from thinkyhead/rc_i2c_slave
...
Add support for i2c slave address
2016-08-11 12:39:26 -07:00
Scott Lahteine
432e9a1f50
Use configured feedrates, center for DELTA_CALIBRATION_MENU
2016-08-11 12:05:55 -07:00
Scott Lahteine
cd496dd9bd
do_blocking_move_to can't be 'inline', takes const ref args
2016-08-11 12:05:55 -07:00
Scott Lahteine
dd75fca4d9
Make M155 / M156 a bit more flexible
2016-08-11 00:52:01 -07:00
Scott Lahteine
a99ecf71d8
Add support for i2c slave address
2016-08-10 23:30:35 -07:00
Scott Lahteine
b63d70b186
Fix serial output for MBL, M303
2016-08-10 18:49:52 -07:00
Scott Lahteine
a36a168af2
Use the truly configured middle on Delta
2016-08-10 00:03:22 -07:00
Scott Lahteine
58c8e6cef2
Fixes #4576 : Convert filamentUsed to long for display
2016-08-09 23:57:28 -07:00
Scott Lahteine
01f1f779a5
Followup to #4574 , specify L for long
2016-08-09 23:43:37 -07:00
Kaibob2
1c7bd17e60
Update language_de.h with MSG_MOVE_E1 - E4
...
MSG_MOVE_E1 was missing
MSG_MOVE_E2 was missing
MSG_MOVE_E3 was missing
MSG_MOVE_E4 was missing
I assigned "0" to "MSG_MOVE_E1", "1" to "MSG_MOVE_E2" and so on, as this is what i assume to be the standard naming for the first (E0) and second (E1) extruder. This would have to be changed inthe other languages too :(
2016-08-09 20:49:26 +02:00
Scott Lahteine
880cdb553b
Include days in Graphical LCD print timer
2016-08-08 23:21:36 -07:00
Scott Lahteine
f4ac8c15e3
Merge pull request #4573 from thinkyhead/rc_mintemp_bed_later
...
Throw MINTEMP BED error only if heating
2016-08-08 23:02:42 -07:00
Scott Lahteine
b7b5b50a84
Throw bed min temp error only if heating
2016-08-08 22:49:22 -07:00
Scott Lahteine
d3ba878f70
Drop intermediate float in HEATER_0_USES_MAX6675 test
2016-08-08 22:49:22 -07:00
Scott Lahteine
3e8f9ecd1c
Extend min/max_temp_error for the bed
2016-08-08 22:49:21 -07:00
Scott Lahteine
1f15f0df5f
Merge pull request #4572 from thinkyhead/rc_digital_clock_100h
...
Show up to 99:59 in digital time
2016-08-08 22:28:29 -07:00
Scott Lahteine
8100a4dace
Fix a compile error in EMERGENCY_PARSER sanity check
2016-08-08 21:49:57 -07:00
Scott Lahteine
45f67164b6
Simplify the delay in kill()
2016-08-08 21:49:34 -07:00
Scott Lahteine
30b1c731b5
Show up to 99:59 in digital time
2016-08-08 21:26:34 -07:00
Scott Lahteine
3be4511230
Patch command order in delta calibration menu
2016-08-08 21:15:25 -07:00
Scott Lahteine
9afa060ed6
Merge pull request #4570 from thinkyhead/rc_proper_delta_calibration
...
Make DELTA_CALIBRATION_MENU more universal
2016-08-08 21:11:40 -07:00
Scott Lahteine
46c8862635
Merge pull request #4564 from AnHardt/max-spi-setup
...
MISO is an input
2016-08-08 21:01:15 -07:00
Scott Lahteine
88540d8ecf
Fix: LCD displays SD status at startup
2016-08-08 20:53:18 -07:00
Scott Lahteine
b16ea09498
Make DELTA_CALIBRATION_MENU more universal
2016-08-08 20:42:58 -07:00
Scott Lahteine
3a56836ead
Always disable SLOWDOWN for DELTA/SCARA
2016-08-08 18:06:46 -07:00
AnHardt
aa9b52b2e7
MISO is an input
2016-08-08 20:09:57 +02:00
Scott Lahteine
67c4acf750
Merge pull request #4562 from thinkyhead/rc_fix_z_dual_endstops
...
Fix Z_DUAL_ENDSTOPS with Z MIN Homing
2016-08-07 19:23:09 -07:00
Scott Lahteine
e113740fa3
Specify that Z_PROBE_*_HEIGHT is nozzle-relative
2016-08-07 17:54:17 -07:00
Scott Lahteine
462e189edd
Move pullups after Z_DUAL_ENDSTOPS block
2016-08-07 17:43:02 -07:00
Scott Lahteine
367dad5902
Sanity check Z_DUAL_ENDSTOPS with DELTA
2016-08-07 17:08:41 -07:00
Scott Lahteine
5fca110e0d
Fix Z_DUAL_ENDSTOPS with MIN homing
2016-08-07 17:08:41 -07:00
Scott Lahteine
fc11f05c11
Merge pull request #4556 from thinkyhead/rc_all_feedrates_mm_s
...
Within Marlin, maintain most feed rates in mm/s
2016-08-07 16:14:16 -07:00
Scott Lahteine
7b2abe6fc8
Use steps_to_mm in extruder runout prevent
2016-08-07 00:28:52 -07:00
Scott Lahteine
d320065320
Within Marlin, maintain most feed rates in mm/s
2016-08-07 00:28:52 -07:00
Scott Lahteine
ed0b50ebee
Merge pull request #4555 from thinkyhead/rc_mbl_index_rounding
...
Remove premature int-cast from MBL cell index methods
2016-08-06 23:34:01 -07:00
Scott Lahteine
bad286d52f
Save CPU by multiplying by pre-compiled values
2016-08-06 23:24:07 -07:00
Scott Lahteine
dce6026e0e
Remove premature cast to int
2016-08-06 23:01:29 -07:00
Scott Lahteine
cffe77c537
Merge pull request #4553 from thinkyhead/rc_lcd_chars_save_ram
...
Save bytes for custom chars (Hitachi LCD)
2016-08-06 18:29:16 -07:00
Scott Lahteine
42927530fe
Explicitly clear the screen in lcd_goto_screen
2016-08-06 18:10:39 -07:00
Scott Lahteine
a6d2c2479f
Minor cleanup of lcd_goto_screen calls
2016-08-06 18:10:39 -07:00
Scott Lahteine
e47c8b9829
Save bytes for custom chars (Hitachi LCD)
2016-08-06 18:10:39 -07:00
Scott Lahteine
0ff5005c9b
Allow connector flexibility for BQ ZUM Mega
2016-08-06 17:19:12 -07:00
Scott Lahteine
98437bd488
Allow override of CONTROLLERFAN_PIN with RAMPS EFF
2016-08-06 17:19:12 -07:00
Scott Lahteine
93eafa1785
Use DISABLED to check TEENSY pin option
2016-08-06 17:19:12 -07:00
AnHardt
98392abb78
Clean warnings for pins_BQ_ZUM_MEGA_3D.h
2016-08-06 17:19:12 -07:00
AnHardt
98e96feee9
Repair SPI-pins
...
SCK_PIN can't be defined as DIO[number] they mus be defined as pure number.
So rebuilding the structure of fastio.h in pins.h.
2016-08-06 17:19:11 -07:00
Scott Lahteine
a00783c41f
Format probe stowed test code
2016-08-06 14:31:07 -07:00
AnHardt
f37e8a31d7
Make Allen Key Probe stow
...
by switching off the tests for the probe before the stow move.
2016-08-06 14:30:38 -07:00
Scott Lahteine
5347f39fce
Merge pull request #4542 from AnHardt/rep-de
...
Repair-language.de
2016-08-05 23:50:35 -07:00
Scott Lahteine
5ef4a5577c
Merge pull request #4537 from thinkyhead/rc_fix_some_flaws
...
Patch up some flaws here and there
2016-08-05 23:49:57 -07:00
AnHardt
0d3b67a580
Repair-language.de
2016-08-06 01:00:40 +02:00
Scott Lahteine
938e6d15c4
Patch up some flaws, here and there
2016-08-05 08:17:37 -07:00
Scott Lahteine
3a3984e67a
Merge pull request #4535 from thinkyhead/rc_old_symbols_first
...
Move tests for old symbols to the top of sanity check
2016-08-04 21:24:02 -07:00
Scott Lahteine
d7b882e430
Move tests for old symbols to the top of sanity check
2016-08-04 21:03:55 -07:00
Scott Lahteine
479107d04f
Merge pull request #4530 from Kaibob2/patch-1
...
Added / Update language_de.h
2016-08-04 16:58:50 -07:00
Kaibob2
1abd7fa670
Update language_de.h
...
Added german translation for MSG_INFO_PRINT_LONGEST and MSG_INFO_PRINT_FILAMENT.
MSG_HEATING_COMPLETE changed from "Aufgeheizt" to "Extr. aufgeheizt"
MSG_HEATING changed from "Aufheizen" to "Extr. aufheizen"
2016-08-04 09:40:38 +02:00
Scott Lahteine
7e2bd9a233
Z_RAISE_PROBE_* => Z_PROBE_*_HEIGHT
2016-08-03 21:18:38 -07:00
Scott Lahteine
445458c221
Don't include zprobe_zoffset in do_probe_raise
2016-08-03 21:12:02 -07:00
Rafa Couto
0114676953
Update of Galician language 2016-08-03
2016-08-03 15:00:18 +02:00
Scott Lahteine
bd7a96ed42
Merge pull request #4517 from thinkyhead/rc_min_probe_pin
...
Define Z_MIN_PROBE_PIN always, allowing override
2016-08-02 21:35:59 -07:00
Scott Lahteine
704ae1b737
Merge pull request #4516 from thinkyhead/rc_short_prints_quiet
...
Only report finished prints longer than 1 min
2016-08-02 21:14:30 -07:00
Scott Lahteine
7ed70305df
Merge pull request #4515 from thinkyhead/rc_fix_speaker_tone
...
Prevent the 'tone(f,d)' function from being interrupted
2016-08-02 21:13:47 -07:00
Scott Lahteine
f1be87a85c
Move probe pin sanity checks out of ABL block
2016-08-02 20:55:17 -07:00
Scott Lahteine
9cb596e88c
Define Z_MIN_PROBE_PIN always, allowing override
2016-08-02 20:31:44 -07:00
Scott Lahteine
229f70f194
Only report finished prints longer than 1 min
2016-08-02 19:58:12 -07:00
Scott Lahteine
e040e00ae9
Merge pull request #4514 from thinkyhead/rc_cleanup_circularqueue
...
Patch up CircularQueue
2016-08-02 19:42:38 -07:00
Scott Lahteine
6110d57c16
Prevent the 'tone(f,d)' function from being interrupted
2016-08-02 19:37:47 -07:00
Scott Lahteine
b73203a0b7
Move some includes around to uncover missing deps
2016-08-02 19:37:46 -07:00
Scott Lahteine
f26d5425bf
Patch up CircularQueue
...
- Use `size` and `count` instead of `length` and `size`
- Fix bug: `peek` should return the item
- Clean up comments, spacing, spelling
2016-08-02 18:57:15 -07:00
Scott Lahteine
c9123adc59
Improved SCREEN / MENU macros
2016-08-02 18:05:34 -07:00
Scott Lahteine
cebeb48005
Merge pull request #4511 from thinkyhead/rc_encoder_flex
...
Allow encoder pulse/step override for more LCDs
2016-08-02 16:50:50 -07:00
Scott Lahteine
3cccaa9885
Allow encoder pulse/step override for more LCDs
2016-08-02 15:57:26 -07:00
Scott Lahteine
14c5a46ee9
Use multiplication for MMM_SCALED
2016-08-02 15:05:17 -07:00
Scott Lahteine
d8945e8464
Fix Z_HEAD index for COREYZ
2016-08-02 15:05:17 -07:00
Scott Lahteine
0f030aface
Merge pull request #4503 from AnHardt/fix-retract
...
Correct typo in retract()
2016-08-02 15:04:55 -07:00
Scott Lahteine
fbd8f06951
Merge pull request #4506 from thinkyhead/rc_buzzer_needs_beeper
...
Buzzer requires BEEPER_PIN
2016-08-02 14:40:43 -07:00
Scott Lahteine
330f82971b
Buzzer requires BEEPER_PIN
2016-08-02 14:05:37 -07:00
Scott Lahteine
e0d7b8bf27
Fix Azteeg X3 servo pin / Viki i2c
2016-08-02 14:05:37 -07:00
Scott Lahteine
7cceb15925
Merge pull request #4505 from thinkyhead/rc_auto_select_dplugs
...
Auto-select power plugs for RAMPS derivatives
2016-08-02 12:56:52 -07:00
Scott Lahteine
593b37519a
Boards with 4 power outputs are EFBF or EFBE
2016-08-02 12:34:28 -07:00
AnHardt
9ab94bd2c1
fix-babysrepping
2016-08-02 21:06:42 +02:00
AnHardt
39c4603598
Correct typo in retract.
2016-08-02 21:06:08 +02:00
Scott Lahteine
cebd2bfff0
Auto-select power plugs for RAMPS derivatives
2016-08-02 11:59:25 -07:00
Scott Lahteine
34c60f1b55
Merge pull request #4491 from thinkyhead/rc_fix_lcd_move_e
...
Use a default argument in _lcd_move_e
2016-08-01 16:45:25 -07:00
Scott Lahteine
38af251b91
Use a default argument in _lcd_move_e
2016-08-01 16:09:26 -07:00
Scott Lahteine
374ae6c099
Fix pins for RAMBO plus VIKI
2016-08-01 16:09:26 -07:00
Scott Lahteine
7594138740
Merge pull request #4493 from jbrazio/buildroot-cleanup
...
Move font folder
2016-08-01 15:57:23 -07:00
Scott Lahteine
6eed37aafb
Merge pull request #4486 from thinkyhead/rc_pid_add_extrusion_rate_off
...
PID_EXTRUSION_SCALING, disabled by default
2016-07-31 18:23:51 -07:00
Scott Lahteine
4bf3526d00
Merge pull request #4463 from thinkyhead/rc_azteeg_x3_eeb
...
Wrangle RAMPS variants and derivatives
2016-07-31 18:22:49 -07:00
Scott Lahteine
1993c45759
Merge pull request #4487 from thinkyhead/rc_refresh_pos_fix
...
Update refresh_positioning - no need for obj ref
2016-07-31 18:22:38 -07:00
Scott Lahteine
f83369b79c
Update refresh_positioning - no need for obj ref
2016-07-31 18:01:13 -07:00
Scott Lahteine
63fd1f49a6
PID_EXTRUSION_SCALING, disabled by default
2016-07-31 17:49:34 -07:00
Scott Lahteine
49997e2e22
HI_VOLT_PIN => "RAMPS_Dn_PIN"
2016-07-31 15:42:52 -07:00
AnHardt
60ad365e21
repair-software-spi
2016-07-31 15:50:42 +02:00
Scott Lahteine
f388beafa1
Merge pull request #4476 from otvald/RCBugFix
...
FIX for endstop adjustemt on delta is offset
2016-07-31 01:09:54 -07:00
Scott Lahteine
3633d4978b
Merge pull request #4475 from esenapaj/Fix-for-PR-#4452
...
Fix for PR #4452 (Additional heater-state output changes)
2016-07-31 01:08:27 -07:00
Thomas Otvald Jensen
fe059f1221
During homing, line_to_axis_pos will make a path which moves across the
...
endstop trigger point. The move is stopped at endstop, so current_position
should also be adjusted to reflect this!
Caused error in subsequent call in endstop adjustment, since the movement
would assume a wrong starting position.
2016-07-30 16:50:31 +02:00
esenapaj
bd73e6d3c8
Fix for PR #4452 (Additional heater-state output changes)
...
・Add missing ';'
2016-07-30 22:49:30 +09:00
esenapaj
cd5b03d88f
Update distribution date and readme
2016-07-30 21:27:29 +09:00
Scott Lahteine
f575e92f2e
Merge pull request #4473 from esenapaj/Follow-up-the-PR-#4408-etc
...
Follow-up the PR #4408 (Add support for reprapworld LCD), etc
2016-07-30 04:45:27 -07:00
esenapaj
657ef8aded
Follow-up the PR #4408 (Add support for reprapworld LCD), etc
...
・Put #define REPRAPWORLD_GRAPHICAL_LCD into all the example
configuration files
・Adjust spacing
2016-07-30 20:32:57 +09:00
Scott Lahteine
83d341c394
Make Conditionals.h a catch-all for old configs
2016-07-30 04:25:30 -07:00
Scott Lahteine
de951c64f1
Make pins for EFF a consistent order
2016-07-30 04:17:21 -07:00
Scott Lahteine
49f75b7891
pins_RAMPS_14.h => pins_RAMPS.h
2016-07-30 04:17:21 -07:00
Scott Lahteine
d3b713cebc
Set flags for RAMPS "type" in pins.h
2016-07-30 04:17:21 -07:00
Scott Lahteine
223b7e473f
RAMPS assignment for derivatives
2016-07-30 04:17:21 -07:00
Scott Lahteine
3865843283
Consolidate setting of RAMPS High Voltage PWM outputs
2016-07-30 04:17:21 -07:00
Scott Lahteine
bdac2eb13a
Don't set non-existent SLED_PIN
2016-07-30 04:17:21 -07:00
Scott Lahteine
bfbd01e29a
Merge pull request #4470 from thinkyhead/rc_fix_manual_move
...
Followup to #4468
2016-07-30 04:17:05 -07:00
Scott Lahteine
802d873fc1
Merge pull request #4469 from esenapaj/Fix-for-PR-#4453
...
Fix for PR #4453 (Improved MANUAL_[XYZ]_HOME_POS)
2016-07-30 04:08:54 -07:00
Scott Lahteine
8e2f095dde
Merge pull request #4456 from jbrazio/speaker-type3
...
Improvement to non-blocking speaker
2016-07-30 04:07:08 -07:00
Scott Lahteine
ad68b4cb8b
Followup to #4468
2016-07-30 03:49:42 -07:00
esenapaj
b8c112c490
Fix for PR #4453 (Improved MANUAL_[XYZ]_HOME_POS)
2016-07-30 19:37:43 +09:00
Scott Lahteine
2f76138645
Merge pull request #4468 from thinkyhead/rc_fix_manual_move
...
Specify manual-movable E axes by extruder type
2016-07-30 03:21:43 -07:00
Scott Lahteine
696b63e300
Specify manual-movable E axes by extruder type
2016-07-30 00:36:48 -07:00
Scott Lahteine
46c33f1cfa
Merge pull request #4467 from jbrazio/safe_delay-millis_t
...
Makes safe_delay() to be fully compatible with delay()
2016-07-29 20:23:44 -07:00
Scott Lahteine
9e21b2e51d
Merge pull request #4455 from AnHardt/double-bump-feature
...
double bump probing as a feature
2016-07-29 20:00:10 -07:00
Scott Lahteine
db4d03bc81
Merge pull request #4452 from thinkyhead/rc_fix_heaterstates_part_2
...
Additional heater-state output changes
2016-07-29 19:58:00 -07:00
Scott Lahteine
c68ca95345
Merge pull request #4464 from thinkyhead/rc_fix_steps_per_mm_handling
...
Account for DELTA in Planner::refresh_positioning
2016-07-29 19:34:59 -07:00
João Brázio
226e74a438
Fixes safe_delay() to be fully compatible with delay()
2016-07-30 02:56:26 +01:00
João Brázio
8e79e8cdb3
Adds types.h
2016-07-30 02:55:52 +01:00
Scott Lahteine
844a4e799e
Account for DELTA in Planner::refresh_positioning
2016-07-29 18:41:11 -07:00
AnHardt
7188ce0ad6
double bump probing as a feature
...
Why double touch probing is not a good thing.
It's widely believed we can get better __probing__ results when using a double touch when probing.
Let's compare to double touch __homing__.
Or better let's begin with single touch __homing__.
We home to find out out position, so our position is unknown.
To find the endstop we have to move into the direction of the endstop.
The maximum way we have to move is a bit longer than the axis length.
When we arrive at the endstop - when it triggers, the stepper pulses are stopped immediately.
It's a sudden stop. No smooth deacceleration is possible.
Depending on the speed and the moving mass we lose steps here.
Only if we approached slow enough (below jerk speed?) we will not lose steps.
Moving a complete axis length, that slow, takes for ever.
To speed up homing, we now make the first approach faster, get a guess about our position,
back up a bit and make a second slower approach to get a exact result without losing steps.
What we do in double touch probing is the same. But the difference here is:
a. we already know where we are
b. if the first approach is to fast we will lose steps here to.
But this time there is no second approach to set the position to 0. We are measuring only.
The lost steps are permanent until we home the next time.
So if you experienced permanently rising values in M48 you now know why. (Too fast, suddenly stopped, first approach)
What can we do to improve probing?
We can use the information about our current position.
We can make a really fast, but deaccelerated, move to a place we know it is a bit before the trigger point.
And then move the rest of the way really slow.
2016-07-30 03:00:49 +02:00
Scott Lahteine
c31f56a38c
Deprecate EXTRUDER_WATTS and BED_WATTS
2016-07-29 17:34:14 -07:00
Scott Lahteine
e1970b4b28
Show power output in same order as temp output
2016-07-29 14:55:22 -07:00
Scott Lahteine
74df828acc
Show ADC values inline rather than after
2016-07-29 14:55:18 -07:00
João Brázio
2b5faa61e2
Consolidates Buzzer and Speaker into a single object
2016-07-29 19:25:39 +01:00
João Brázio
8093c5f534
Non-blocking speaker now uses arduino's tone()
2016-07-29 18:45:50 +01:00
João Brázio
8896f08074
Fixes a compilation error introduced by #4448
2016-07-29 18:33:42 +01:00
Scott Lahteine
ea5ac94804
Improved MANUAL_[XYZ]_HOME_POS
...
No need for `MANUAL_HOME_POSITIONS`. Just set each one as-needed to
override the automatic behavior.
2016-07-28 19:51:48 -07:00
Scott Lahteine
b40661cb18
Fix output of heater states
2016-07-28 17:40:01 -07:00
Scott Lahteine
9083e5420a
Merge pull request #4419 from AnHardt/sd2pinmap
...
Switch Sd2CardLib to fastio
2016-07-28 17:38:46 -07:00
Scott Lahteine
6f59560526
Merge pull request #4448 from jbrazio/speaker-followup
...
A little cleanup at speaker.h
2016-07-28 17:37:36 -07:00
Scott Lahteine
c94b6dd3e7
Revert to SanityCheck on every .cpp file
2016-07-28 17:17:50 -07:00
Scott Lahteine
256b03598d
Merge pull request #4450 from thinkyhead/rc_fix_delta_optimization
...
Fix DELTA speed calculation
2016-07-28 16:50:04 -07:00
Scott Lahteine
753283e020
inverse_second => inverse_mm_s
2016-07-28 16:35:18 -07:00
Scott Lahteine
83e1d90ca3
Undo errant optimization of block->millimeters
2016-07-28 16:26:52 -07:00
João Brázio
909e98b1af
A little cleanup at speaker.h
2016-07-29 00:03:25 +01:00
Scott Lahteine
ae1c7bca1b
Merge pull request #4445 from thinkyhead/rc_fix_rdfgsc_mega3
...
Fix for R.D.F.G.S.C. with MEGATRONICS 3 board
2016-07-28 15:55:30 -07:00
Scott Lahteine
03fdb26cd2
Wrangle encoder bits, LCD_CLICKED
2016-07-28 14:44:37 -07:00
Scott Lahteine
155def24c6
BLEN_A, B, C are defined in ultralcd headers
2016-07-28 14:38:50 -07:00
Scott Lahteine
42dcc3bf50
Remove "the click" comments
2016-07-28 14:38:50 -07:00
Scott Lahteine
0eba65f96b
Fix for R.D.F.G.S.C. with MINITRONICS board
2016-07-28 14:38:50 -07:00
fabtopia
83d0d59303
Fix for R.D.F.G.S.C. with MEGATRONICS 3 board
...
The support for reprapworld LCD boke the code for the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER. See Full Grapics Display does not work any more after #4408 #4439
2016-07-28 13:12:19 -07:00
João Brázio
4f191a384b
Moves the font folder into the buildroot
2016-07-28 19:56:41 +01:00
Scott Lahteine
5367d56f87
Merge pull request #4434 from thinkyhead/rc_delta_safe_homing
...
DELTA should ignore Z_SAFE_HOMING
2016-07-27 23:41:52 -07:00
Scott Lahteine
2525528fb2
DELTA should ignore Z_SAFE_HOMING
2016-07-27 23:25:56 -07:00
Scott Lahteine
ab4b2a66ff
Allow zero Z_RAISE_BETWEEN_PROBINGS
2016-07-27 05:00:58 -07:00
Scott Lahteine
8953e3e984
Allow Z_SAFE_HOMING without a probe
2016-07-27 04:33:56 -07:00
AnHardt
e4942d2163
Switch SD2cadrLib to fastio
...
Replace all fastDigitalRead/Write() with READ/WRITE()
Define SCK_PIN, MISO_PIN, MOSI_PIN in pins.h if not already defined in the pins_*.h files.
Remove these conditional pin definitions from the pin-files. They are now always defined.
Define separate sets of SPI-pins for AT90USB with and without Teensy support in fastio.h.
Likely this was the main reason for all that confusion about the AT90USB-SPI pins.
2016-07-27 12:40:44 +02:00
Scott Lahteine
21e744c454
Allow zero raise for deploy/stow
2016-07-26 17:19:25 -07:00
Scott Lahteine
54084612fd
Merge pull request #4415 from petrzjunior/transl
...
[LANGUAGE] Update Czech (Info screen strings)
2016-07-26 13:20:20 -07:00
Scott Lahteine
5597400cda
Merge pull request #4414 from thinkyhead/rc_split_conditionals
...
Split up Conditionals.h into two files
2016-07-26 13:16:52 -07:00
Scott Lahteine
4be635ec6e
Remove MSG_PRINT_TIME from languages
2016-07-26 12:47:45 -07:00
Scott Lahteine
3be49881c0
Make SanityCheck.h a catch-all for obsolete configs
2016-07-26 12:41:40 -07:00
Scott Lahteine
fa647cca23
Do the sanity check just once per build
2016-07-26 12:37:14 -07:00
Scott Lahteine
24a1a16e5d
Move versioning to MarlinConfig.h
2016-07-26 12:37:14 -07:00
Scott Lahteine
7e70a0b05d
Move pins / Arduino includes to MarlinConfig.h
2016-07-26 12:37:14 -07:00
Scott Lahteine
d9f7ed9a3c
Move some macros from Marlin.h to macros.h
2016-07-26 12:37:13 -07:00
Scott Lahteine
277899c175
Move include _Bootscreen.h where needed
2016-07-26 12:37:13 -07:00
Scott Lahteine
83c4653c71
Include boards and macros ahead of configs
2016-07-26 12:19:50 -07:00
Scott Lahteine
5f4702ecb2
Make Conditionals.h a catch-all for old configs
2016-07-26 12:19:50 -07:00
Scott Lahteine
8a44928df3
Make Conditionals.h a catch-all for old configs
2016-07-26 12:19:50 -07:00
Petr Zahradník junior
3d9b878cf0
Czech update
2016-07-26 13:48:27 +02:00
Scott Lahteine
c6226bb0aa
Unify config in a single include without nested includes
2016-07-25 23:04:19 -07:00
Scott Lahteine
2d378fac1b
No need to include thermistortables.h in Configuration.h
2016-07-25 22:43:50 -07:00
Scott Lahteine
df27d01cd9
Arrange needed includes in Marlin.h
2016-07-25 20:53:36 -07:00
Scott Lahteine
93ea281061
Split up Conditionals.h into two files
...
Rather than include twice, which is tricky but may confuse
2016-07-25 20:30:45 -07:00
Scott Lahteine
8684570f68
Merge pull request #4412 from thinkyhead/rc_followup_4402
...
Followup #4402 fixing 3-point leveling
2016-07-25 16:10:50 -07:00
Scott Lahteine
c55b7d0750
Merge pull request #4405 from thinkyhead/rc_theres_always_something
...
Move HAS_DIGIPOTSS to Conditionals.h
2016-07-25 15:58:42 -07:00
Scott Lahteine
42eebcd518
Merge pull request #4409 from thinkyhead/rc_cleanup_comment
...
Clean up Transfer Buffer Size comment
2016-07-25 15:58:34 -07:00
Scott Lahteine
5272147f7c
Followup #4402 fixing 3-point leveling
2016-07-25 15:56:34 -07:00
Scott Lahteine
fcc39e2b5f
Clean up Transfer Buffer Size comment
2016-07-25 12:54:55 -07:00
Scott Lahteine
0c0a63322b
Patches to prepare REPRAPWORLD_GRAPHICAL_LCD
2016-07-25 12:10:25 -07:00
brupje
a60a668f6b
Support for REPRAPWORLD_GRAPHICAL_LCD
2016-07-25 12:10:25 -07:00
Scott Lahteine
4f2ff46ab9
Move HAS_DIGIPOTSS to conditionals
2016-07-25 00:10:46 -07:00
Scott Lahteine
54f4f80077
Merge pull request #4404 from thinkyhead/rc_better_stepper_indirection
...
Arrange stepper_indirection by axis
2016-07-24 19:26:39 -07:00
Scott Lahteine
169c21b477
Merge pull request #4402 from thinkyhead/rc_consistent_positioning
...
Account for coordinate space offsets
2016-07-24 19:23:20 -07:00
Scott Lahteine
750a1e5116
Arrange stepper_indirection by axis
2016-07-24 19:00:51 -07:00
Scott Lahteine
7c27f34996
Merge pull request #4397 from thinkyhead/rc_tweak_eeprom
...
Neaten up EEPROM read/write functions
2016-07-24 18:45:54 -07:00
Scott Lahteine
2595a40a61
Account for coordinate space more in G28 / G29 / M48
2016-07-24 18:34:05 -07:00
Scott Lahteine
060dc6d95a
Neaten up EEPROM read/write functions
2016-07-24 18:19:39 -07:00
Scott Lahteine
b7b7c90477
Merge pull request #4389 from thinkyhead/rc_optimize_planner
...
Optimize planner with precalculation, etc.
2016-07-24 17:48:23 -07:00
Scott Lahteine
6900bb2286
Merge pull request #4395 from tnw513/italian_fix
...
Update Italian translations. Remove trailing spaces.
2016-07-24 17:47:48 -07:00
Scott Lahteine
e4816293a8
serial_echopair_P for uint16_t
2016-07-24 17:46:37 -07:00
Scott Lahteine
d8e5af6834
Use RAW_POSITION for MBL in planner.set_position_mm
2016-07-24 17:20:36 -07:00
Scott Lahteine
b183442c61
Fix inactive_extruder_x_pos for coordinate space
2016-07-24 17:20:36 -07:00
Scott Lahteine
f75b0c2ee1
Make POSITION macros global
2016-07-24 17:20:36 -07:00
Scott Lahteine
101b60ef42
Tweak Dual X Carriage data spacing
2016-07-24 17:20:35 -07:00
Scott Lahteine
1fe60b723f
Merge pull request #4400 from thinkyhead/rc_sanity_check_temp_sensor
...
Sanity check for too many temp sensors
2016-07-24 15:38:41 -07:00
Scott Lahteine
bedda3be61
Patch generic delta error caught by sanity check
2016-07-24 15:24:40 -07:00
Scott Lahteine
a5212bf277
Sanity check for too many temp sensors
2016-07-24 13:47:27 -07:00
Scott Lahteine
d8f2876753
Replace some float division with multiplication
2016-07-24 13:27:50 -07:00
Scott Lahteine
ddde785b37
Code formatting in planner.cpp
2016-07-24 13:27:50 -07:00
Scott Lahteine
f8b5749235
Replace division in planner with multiplication
2016-07-24 13:27:49 -07:00
Scott Lahteine
b921f6b69d
Optimize calculation of block->millimeters for DELTA
2016-07-24 13:27:49 -07:00
Scott Lahteine
db5df9500b
Move sync_plan_position closer to the top
2016-07-24 13:27:49 -07:00
Scott Lahteine
2839c56f5a
Merge pull request #4390 from jbrazio/duration_t
...
Renamed timestamp_t to duration_t
2016-07-24 13:24:05 -07:00
Scott Lahteine
d6c50671d3
Sanitycheck: Z_SAFE_HOMING points are reachable
2016-07-24 10:54:47 -07:00
Scott Lahteine
a6203366b6
Sanitycheck: Z_SAFE_HOMING requires a probe
2016-07-24 10:54:25 -07:00
Scott Lahteine
bbe5b80492
Always define probe limits if there is a probe
2016-07-24 10:53:58 -07:00
Silvio Didonna
950397f2a0
Added missing translations. Removed trailing spaces for consistency ( #4376 )
2016-07-24 17:22:30 +02:00
João Brázio
50fb0f7cec
M31 serial output is now always in EN
2016-07-24 15:52:03 +01:00
João Brázio
62d96d72f3
Renamed timestamp_t to duration_t
2016-07-24 03:16:02 +01:00
Scott Lahteine
3e2b3353b0
Fix axis indices for COREYZ
2016-07-23 19:02:14 -07:00
Scott Lahteine
c287846f46
Merge pull request #4387 from thinkyhead/rc_anhardt_more_4370
...
Update Z in a unified way in run_z_probe
2016-07-23 16:47:10 -07:00
Scott Lahteine
22d0654fe6
Merge pull request #4382 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
2016-07-23 16:31:38 -07:00
Scott Lahteine
bb93b6822a
Use set_current_from_steppers_for_axis
2016-07-23 15:25:54 -07:00
AnHardt
96a162beda
Use implications from #4370 in run_z_probe()
...
See also https://github.com/MarlinFirmware/Marlin/pull/4370#issuecomment-234713680
2016-07-23 13:09:28 -07:00
Scott Lahteine
4e67a85a5d
Macros to loop over axes
2016-07-23 13:09:28 -07:00
esenapaj
784be56e99
Follow-up the PR #4353 (General cleanup: enum)
...
・Update description of M111
2016-07-24 00:53:35 +09:00
esenapaj
3c11977558
Update Japanese translation
...
・Add translation
・Change translation
・Remove translation
2016-07-23 22:07:20 +09:00
Scott Lahteine
08459a003f
Undo the self-sabotage that is do_blocking_move_to_axis_pos
2016-07-23 00:59:11 -07:00
esenapaj
d32c4056ad
Fix for the PR #4379 (Additional logging of do_blocking_move_to)
...
・Remove unneeded PSTR()
2016-07-23 16:38:57 +09:00
Scott Lahteine
8099ee51a5
Merge pull request #4379 from thinkyhead/rc_blocking_move_logging
...
Additional logging of do_blocking_move_to
2016-07-23 00:10:55 -07:00
Scott Lahteine
8633b644cf
Merge pull request #4378 from thinkyhead/rc_debug_leveling_docs
...
Document DEBUG_LEVELING_FEATURE
2016-07-22 23:57:01 -07:00
Scott Lahteine
ad16d5019e
Additional logging of do_blocking_move_to
2016-07-22 23:53:08 -07:00
Scott Lahteine
bb9da6ebdd
Document DEBUG_LEVELING_FEATURE
2016-07-22 23:37:41 -07:00
Scott Lahteine
652fd8a826
Merge pull request #4362 from thinkyhead/rc_duplication_mode
...
DUAL_NOZZLE_DUPLICATION_MODE
2016-07-22 21:17:59 -07:00
Scott Lahteine
1766b990b8
Merge pull request #4376 from jbrazio/timestamp_t-short
...
Adds short format to timestamp_t
2016-07-22 21:17:17 -07:00
Scott Lahteine
6da3729531
Merge pull request #4370 from thinkyhead/rc_delta_fwd_kinematics
...
Delta Forward Kinematics (and LOGICAL_POSITION)
2016-07-22 21:16:00 -07:00
João Brázio
9e5dbf67e8
Update the stats menu to include longest job and extruded filament
2016-07-23 03:05:45 +01:00
João Brázio
86d9311495
Rework LCD implementation to use timestamp_t
2016-07-23 03:05:36 +01:00
Scott Lahteine
b3eb0c8569
Add LOGICAL_POSITION macro, apply to kinematics
2016-07-22 18:38:13 -07:00
Scott Lahteine
35a610abf9
const arg to inverse_kinematics
2016-07-22 17:42:48 -07:00
João Brázio
b4aad85c9a
Rework stats menu to use timestamp_t
2016-07-23 01:42:21 +01:00
João Brázio
ecd48027fa
Adds short timestamp format to timestamp_t
2016-07-23 01:41:25 +01:00
Scott Lahteine
b6afa028f4
Don't call adjust_delta on SCARA
2016-07-22 16:36:34 -07:00
Scott Lahteine
d5e2d523c7
Generalize kinematics function names
2016-07-22 16:36:34 -07:00
Scott Lahteine
9c4ad7d7ef
Clean up delta declarations in Marlin_main.cpp
2016-07-22 16:36:33 -07:00
Scott Lahteine
4b1725628b
Move kinematic functions to "private" scope
2016-07-22 16:36:33 -07:00
Scott Lahteine
cde068ea42
Use set_current_from_steppers in quickstop_stepper
2016-07-22 16:36:33 -07:00
Scott Lahteine
9f30cc84ce
Use set_current_from_steppers for other kinematics
2016-07-22 16:36:33 -07:00
AnHardt
5db9b940ee
Use forwardKinematics in DELTA run_z_probe()
2016-07-22 16:36:33 -07:00
Scott Lahteine
b5a9647fec
Use ENABLED in stepper_indirection.h
2016-07-22 16:26:06 -07:00
Scott Lahteine
cbc7f22ad9
Implement DUAL_NOZZLE_DUPLICATION_MODE
2016-07-22 16:23:58 -07:00
Scott Lahteine
91777dd76c
Add DUAL_NOZZLE_DUPLICATION_MODE option
2016-07-22 16:22:56 -07:00
Scott Lahteine
260bbb3109
Fix a couple of simple typos
2016-07-22 16:22:56 -07:00
Scott Lahteine
179e091473
Merge pull request #4374 from thinkyhead/rc_jbrazio_timestamp_t
...
Implements timestamp_t structure
2016-07-22 16:08:10 -07:00
AnHardt
499e404fbf
forwardKinematics for Delta printers
2016-07-22 16:01:51 -07:00
João Brázio
23043a1e05
Rework some code to use timestamp_t struct (saves 72 bytes)
2016-07-22 15:53:31 -07:00
João Brázio
9388dcfa49
Implements timestamp_t structure
2016-07-22 15:53:31 -07:00
Scott Lahteine
0b2c608d2f
Merge pull request #4372 from jbrazio/gcc-bark
...
Fix minor gcc warning
2016-07-22 15:18:53 -07:00
Scott Lahteine
311c7dadb6
Cleanup do_blocking_move_to for DELTA
2016-07-22 14:18:45 -07:00
Scott Lahteine
b78590e63d
Patch and cleanup run_z_probe
2016-07-22 14:18:45 -07:00
João Brázio
2f7716987d
Fix minor gcc warning
2016-07-22 16:08:56 +01:00
João Brázio
efd3aabda8
Adds missing documentation to the point_t structure
2016-07-22 15:19:20 +01:00
Scott Lahteine
39caef4279
Merge pull request #4361 from AnHardt/imp-dbmt-for-delta
...
DELTA do_blocking_move_to() more like the Chartesian one
2016-07-21 20:05:04 -07:00
Scott Lahteine
7d869ad98b
Merge pull request #4365 from thinkyhead/rc_shrink_planner_accel
...
Adjustments to planner acceleration limit
2016-07-21 18:18:15 -07:00
AnHardt
376a57232e
DELTA do_blocking_move_to() more like the Chartesian one
2016-07-22 03:12:46 +02:00
Scott Lahteine
824c6859e2
Merge pull request #4369 from thinkyhead/rc_no_static_moves
...
inline to fix warnings, smaller build size (sometimes)
2016-07-21 14:46:09 -07:00
Scott Lahteine
976c31235d
inline to fix warnings, smaller build size (sometimes)
2016-07-21 13:49:37 -07:00
AnHardt
6ef26a85d8
Back to the differences method in run_z_probe()
2016-07-21 18:16:38 +02:00
Scott Lahteine
4226f56f53
Revert the planner acceleration logic somewhat
2016-07-20 19:19:47 -07:00
Scott Lahteine
16e5348659
Merge pull request #4360 from thinkyhead/rc_toolchange_for_G28
...
Always switch to tool 0 for G28
2016-07-20 19:07:35 -07:00
Scott Lahteine
209f5c03d0
Fewer temporary vars in planner accel limit
2016-07-20 18:29:29 -07:00
Scott Lahteine
62ecd107ba
Patch ultralcd_impl header conditional names
2016-07-20 09:36:55 -07:00
Scott Lahteine
d2e9a9c188
Always switch to tool 0 for G28
2016-07-20 09:36:55 -07:00
Scott Lahteine
194d9521c3
Merge pull request #4356 from thinkyhead/rc_simpler_run_z_probe
...
Unify run_z_probe
2016-07-19 19:02:39 -07:00
Scott Lahteine
4a6ed5e221
Use HOMING_FEEDRATE_Z for Z_PROBE_SPEED_FAST
2016-07-19 18:42:48 -07:00
AnHardt
09a3cc33e6
Unify run_z_probe
...
Unify run_z_probe
Add double touch for DELTAs.
Introduce Z_PROBE_SPEED_FAST and Z_PROBE_SPEED_SLOW
defaulting to homing_feedrate_mm_m[Z_AXIS] and homing_feedrate_mm_m[Z_AXIS]/2
2016-07-19 18:42:48 -07:00
Scott Lahteine
6137a1d934
Merge pull request #4359 from thinkyhead/rc_wrangle_movement_etc
...
Use ENABLED(MAPPER_NON)
2016-07-19 18:22:55 -07:00
Scott Lahteine
0432613ad7
use enabled macro for mapper setting
2016-07-19 18:08:56 -07:00
Scott Lahteine
e44b37cdc2
motion section marker below homing speeds
2016-07-19 17:31:58 -07:00
Scott Lahteine
204fd6ec44
Set homing feedrates individually
2016-07-19 17:31:58 -07:00
Scott Lahteine
2bad02e60d
Reprapworld Keypad: F1 opens the Move Axis menu
2016-07-19 16:40:39 -07:00
Scott Lahteine
eaa6f568ee
Prevent re-entrant call of Reprapworld Keypad handler
2016-07-19 16:40:39 -07:00
Scott Lahteine
6abf916575
Reprapworld Keypad move step is 1mm
2016-07-19 16:40:39 -07:00
Scott Lahteine
06ac1f3bcf
Reduce Reprapworld Keypad move code size
2016-07-19 16:40:39 -07:00
Scott Lahteine
5d5affdfca
Merge pull request #4355 from thinkyhead/rc_rename_ultralcd_files
...
Rename ultralcd implementation files for consistency
2016-07-19 16:14:27 -07:00
Scott Lahteine
bb225dedc6
Merge pull request #4354 from thinkyhead/rc_jbrazio_rework_g12
...
NOZZLE_CLEAN_FEATURE with no dependency on HAS_BED_PROBE
2016-07-19 15:26:59 -07:00
Scott Lahteine
8a2efd1155
Rename ultralcd implementation files for consistency
2016-07-19 15:26:14 -07:00
João Brázio
b869fbc05e
Update all config files with the new G12 options
2016-07-19 15:07:03 -07:00
João Brázio
47fef80848
Nozzle::clean() no longer requires HAS_BED_PROBE
2016-07-19 15:07:02 -07:00
Scott Lahteine
f1f1bac0e1
Merge pull request #4341 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
2016-07-19 15:04:22 -07:00
Scott Lahteine
6c899bb520
Merge pull request #4349 from jbrazio/gcc-bark-bark
...
Removes some minor GCC warnings
2016-07-19 13:42:33 -07:00
Scott Lahteine
ef0a22871e
Merge pull request #4350 from jbrazio/followup-a875861
...
Adds utility.h
2016-07-19 13:40:52 -07:00
Scott Lahteine
9eba58a031
Merge pull request #4351 from jbrazio/u8glib-converter
...
Updates u8glib's bmp2hex converter
2016-07-19 13:39:33 -07:00
Scott Lahteine
c502018eab
Merge pull request #4353 from jbrazio/global-enum-file
...
General cleanup: enum
2016-07-19 13:37:56 -07:00
Scott Lahteine
0f9953b031
Merge pull request #4342 from AnHardt/rep-cons-g28
...
Introduce line_to_axis_pos() for use in homeaxis()
2016-07-19 12:56:58 -07:00
AnHardt
11c075c6b2
Introduce line_to_axis_pos(axis_codes axis, float where, float feed_rate = 0.0)
...
and use it in `homeaxis()` instead of `do_blocking_move_to_axis_pos()`.
`do_blocking_move_to_axis_pos` was wrong because it performed subdivided, delta-corrected moves for x- and y-axis.
The first common move for delta homing is like quick_home but for 3 towers.
Fix two warnings.
2016-07-19 17:24:44 +02:00
João Brázio
3ebad4e020
Moves all global enums to a central file
2016-07-19 14:31:09 +01:00
João Brázio
238fefcb00
Updates Stopwatch class to use internal state enum
2016-07-19 14:30:44 +01:00
João Brázio
30ac0782a9
Comment section style correction
2016-07-19 03:27:42 +01:00
João Brázio
8ecee431c4
Updates u8glib's bmp2hex converter
2016-07-19 03:16:30 +01:00
João Brázio
79e7721b76
Removes some minor GCC warnings
2016-07-19 03:03:11 +01:00
João Brázio
f4d63796b2
Adds utility.h
2016-07-19 02:55:23 +01:00
esenapaj
361307831e
Follow-up the PR #4335 (Debug char, fix compile errors for lcd pins)
...
・Solve a flickering when SD card is inserted or removed at using a ASCII
LCD + language_kana.h
2016-07-18 20:09:24 +09:00
esenapaj
ff48bbb86a
Update Japanese translation
...
・Add new translation
2016-07-18 17:01:56 +09:00
Scott Lahteine
46117593b9
Merge pull request #4185 from esenapaj/Update-Japanese-translation
...
Update Japanese translation (work in progress)
2016-07-17 18:36:34 -07:00
Scott Lahteine
3422103863
Merge pull request #4310 from thinkyhead/rc_mbl_position_shift
...
Fix position shift with MBL
2016-07-17 18:31:25 -07:00
Scott Lahteine
92757bd7b3
Merge pull request #4339 from esenapaj/Follow-up-the-PR-#4163
...
Follow-up the PR #4163 (Mixing and Switching Extruders)
2016-07-17 18:15:23 -07:00
Scott Lahteine
493d30cd97
Drop intermediate nx, ny, and set destination directly
2016-07-17 17:59:52 -07:00
Scott Lahteine
07a735ad22
We always use destination so modify mesh_buffer_line
2016-07-17 17:57:33 -07:00
Scott Lahteine
04a5b7b257
A macro to normalize positions
2016-07-17 17:57:32 -07:00
esenapaj
5c8e87a866
Follow-up the PR #4163 (Mixing and Switching Extruders)
...
・Update forgotten K8400 files
2016-07-18 09:48:13 +09:00
Scott Lahteine
86eb5251c5
Fix some debug messages
2016-07-17 17:10:02 -07:00
Scott Lahteine
1e57a6af73
Use blocking_move, current_position in G28 homing
2016-07-17 16:56:13 -07:00
Scott Lahteine
f6a3a1da09
nz and ne are always set, so drop them down
2016-07-17 14:12:39 -07:00
Scott Lahteine
d0009e013b
Rename cell index vars
2016-07-17 14:12:39 -07:00
Scott Lahteine
697373b071
Reduce code size of mesh_buffer_line
2016-07-17 14:11:25 -07:00
Scott Lahteine
103d312f6d
MBL can actually do up to 9 x 9
2016-07-17 14:11:25 -07:00
Scott Lahteine
f4a69281fc
Only call mesh_buffer_line when MBL is active
2016-07-17 14:11:25 -07:00
Scott Lahteine
799a31cd30
Include the position_shift when splitting mesh lines
2016-07-17 14:08:20 -07:00
Scott Lahteine
f242aea032
Merge pull request #4319 from thinkyhead/rc_feedrates_to_mess_with_you
...
Wrangle feed rate variables
2016-07-17 14:07:52 -07:00
Scott Lahteine
0342661b3f
Merge pull request #4335 from thinkyhead/rc_status_pad_jp
...
Debug char, fix compile errors for lcd pins
2016-07-17 14:07:08 -07:00
Scott Lahteine
81e01152bb
Merge pull request #4336 from thinkyhead/rc_bltouch_sensor
...
BLTouch probe sensor
2016-07-17 14:06:32 -07:00
Scott Lahteine
1583177ef4
BLTOUCH probe config option
2016-07-17 13:55:38 -07:00
Scott Lahteine
176b9627c7
Some cleanup ahead of BLTOUCH support
2016-07-17 13:55:38 -07:00
Scott Lahteine
39706f3e57
Endstop invert flags as macros instead of const bool
2016-07-17 13:51:02 -07:00
Scott Lahteine
7242d44810
Endstops vars already initialized
2016-07-17 13:38:48 -07:00
Scott Lahteine
5ed1e7a464
codenum => dwell_ms
2016-07-17 13:35:21 -07:00
Scott Lahteine
69d6016941
Revert default state of endstops in M502
2016-07-17 13:35:21 -07:00
Scott Lahteine
0fcd3706dd
Replace ENDSTOPS_ONLY_FOR_HOMING with ENDSTOPS_ALWAYS_ON_DEFAULT
2016-07-17 13:35:21 -07:00
Scott Lahteine
671634bf11
Fix spacing after section header
2016-07-17 13:35:21 -07:00
Scott Lahteine
f38553b482
fix a debug message
2016-07-17 13:29:42 -07:00
Scott Lahteine
3d78b8f929
Use HYPOT macro instead of hypot function
2016-07-17 13:29:42 -07:00
Scott Lahteine
9f9fe043ba
Apply sq macro throughout
2016-07-17 13:29:41 -07:00
Scott Lahteine
93ba5bddd7
Append units to feedrate variables
2016-07-17 13:29:41 -07:00
Scott Lahteine
5e3d3918b6
Patch compile error for RAMPS LCD pins
2016-07-17 12:27:37 -07:00
Scott Lahteine
94955a8bf7
pad string in lcd_finishstatus
2016-07-17 12:27:37 -07:00
Scott Lahteine
21ee0612e3
Debug char
2016-07-17 12:27:36 -07:00
Scott Lahteine
8f24e0a556
Debugging of MBL in G28
2016-07-17 11:08:30 -07:00
Scott Lahteine
05da02f0a2
Implement MIXING_EXTRUDER and SWITCHING_EXTRUDER
2016-07-17 10:53:10 -07:00
Scott Lahteine
22b4cff423
New extruder type configuration options
2016-07-17 00:13:56 -07:00
esenapaj
601015b73e
Update Japanese translation
2016-07-17 16:04:12 +09:00
Scott Lahteine
9766e24504
Merge pull request #4277 from thinkyhead/rc_mks_13_viki2
...
Support for VIKI2 with MKS 1.3 / 1.4
2016-07-16 23:49:33 -07:00
Scott Lahteine
02285662f5
Merge pull request #4298 from jbrazio/feature/filament-counter
...
Adds filamentUsed and longestPrint stats to PrintCounter
2016-07-16 23:48:46 -07:00
Scott Lahteine
bf16ae5a70
Merge pull request #4299 from jbrazio/feature/g27-park-nozzle
...
Implements park nozzle feature
2016-07-16 23:47:12 -07:00
Scott Lahteine
aaa0d298b9
Merge pull request #4326 from thinkyhead/rc_no_static_items_fix
...
Suppress compiler warnings in ultralcd.cpp
2016-07-16 23:38:08 -07:00
Scott Lahteine
cc3ef73583
Merge pull request #4327 from thinkyhead/rc_petrzjr_long_print
...
LCD Longer print
2016-07-16 23:37:34 -07:00
Scott Lahteine
77c8fb627f
Merge pull request #4329 from thinkyhead/rc_italian_fix
...
Added missing Italian translations
2016-07-16 23:37:15 -07:00
Scott Lahteine
b14888501b
Merge pull request #4301 from Ingramz/RCBugFix
...
Add Cartesio CN Controls V11
2016-07-16 22:35:07 -07:00
Silvio Didonna
32e0d71729
Added missing translations
2016-07-16 22:26:46 -07:00
Scott Lahteine
0f3232065e
Merge pull request #4305 from jbrazio/feature/splash-improvement
...
Custom boot screen feature improvement
2016-07-16 21:59:39 -07:00
Petr Zahradník junior
2d7fe9dc78
LCD Longer print
2016-07-16 18:21:06 -07:00
Scott Lahteine
eee903bd4b
Format some DAC lines
2016-07-16 17:59:13 -07:00
Scott Lahteine
d53dcaa796
Suppress some compiler warnings
2016-07-16 17:59:01 -07:00
João Brázio
fa4274cf4c
Improves the custom bootscreen logo feature
2016-07-17 01:31:44 +01:00
João Brázio
1f3283e3a5
Adds custom boot logos for bq Hephestos 2 and Cartesio
2016-07-17 01:31:36 +01:00
João Brázio
dfa1c45075
Adds a notice to vendors about the SHOW_CUSTOM_BOOTSCREEN directive
2016-07-17 01:15:17 +01:00
Scott Lahteine
ed468e848f
Merge pull request #4321 from esenapaj/Follow-up-the-PR-#4287
...
Follow-up and fix the PR #4287 (Allow stopwatch and printcounter to go over 18:12:15)
2016-07-16 17:14:21 -07:00
João Brázio
a8758619ec
The safe_delay() is now globaly accessible
2016-07-16 12:28:06 +01:00
João Brázio
9a00108cb6
Adds the WEBSITE_URL as the boot screen line 2
2016-07-16 12:24:37 +01:00
João Brázio
f5234b0695
Adds a customizable screen timeout for the default boot screen
2016-07-16 12:24:36 +01:00
João Brázio
2f26bc2153
Adds filamentUsed and longestPrint stats to PrintCounter
2016-07-16 12:12:27 +01:00
João Brázio
336481ea81
Added G27 configuration options to all configs
2016-07-16 12:07:59 +01:00
João Brázio
c711701626
Implements a nozzle parking command (G27)
2016-07-16 12:07:59 +01:00
João Brázio
5f368d1bc3
Followup for #4320
2016-07-16 11:57:35 +01:00
João Brázio
d7c51bc4b9
Merge pull request #4320 from jbrazio/followup/4307
...
Moves do_blocking_move_to_xy() out of the HAS_BED_PROBE define
2016-07-16 11:48:00 +01:00
esenapaj
af9b1d79b1
Follow-up and fix the PR #4287 (Allow stopwatch and printcounter to go over 18:12:15)
...
・Remove MSG_END_HOUR and MSG_END_MINUTE from all the language files
・Change from MSG_INFO_TOTAL_PRINTS to MSG_INFO_PRINT_COUNT in German
file
2016-07-16 18:39:22 +09:00
Scott Lahteine
e563634a25
Merge pull request #4314 from AnHardt/use-d_b_m_t-in-g28
...
Use do_blicking_move_to*() in G28
2016-07-15 20:22:02 -07:00
Scott Lahteine
59ae1811c2
Merge pull request #4303 from AnHardt/delta-g28
...
DELTA: Move out of the clip-zone after G28
2016-07-15 20:20:22 -07:00
João Brázio
fdea8b6e6a
Moves do_blocking_move_to_xy() out of the HAS_BED_PROBE define
2016-07-16 03:59:49 +01:00
AnHardt
d2a49c016d
DELTA: Move out of the clip-zone after G28
...
Move down to a safe height after G28 for DELTAs.
2016-07-15 15:22:44 +02:00
AnHardt
46994fd17d
Use do_blicking_move_to*() in G28
2016-07-15 15:02:15 +02:00
João Brázio
ffbb31b235
Fixes an PSTR overflow with print_xyz()
2016-07-15 11:25:34 +01:00
Indrek Ardel
ecb23c1b65
Add Cartesio CN Controls V11 board
2016-07-15 12:55:47 +03:00
Indrek Ardel
c8f2dd7cd5
Fix CN Controls 12 styling
2016-07-15 09:54:09 +03:00
Scott Lahteine
cec7110409
Merge pull request #4308 from thinkyhead/rc_debug_gcode_t
...
Added logging related to gcode_T
2016-07-14 19:46:33 -07:00
Scott Lahteine
6446d3939a
Merge pull request #4309 from thinkyhead/rc_static_item_fix_77
...
Fix skipping of static items
2016-07-14 19:28:49 -07:00
Scott Lahteine
95ab2fd3ae
Fix skipping of static items
2016-07-14 19:16:16 -07:00
Scott Lahteine
166f19251e
Add more debugging for leveling
...
- Especially in `gcode_T`
- In `update_software_endstops`
- Some tweaks to observe
2016-07-14 19:04:13 -07:00
Scott Lahteine
7ac0b91a45
Collapsible long comment in gcode_T
2016-07-14 18:28:41 -07:00
João Brázio
e71a631f8f
do_blocking_move_*() no longer depend on HAS_BED_PROBE
2016-07-15 01:54:14 +01:00
Scott Lahteine
8bf6861af8
Merge pull request #4054 from jbrazio/feature/g12-clean-tool
...
Implements clean nozzle feature (Lulzbot's REWIPE)
2016-07-14 14:38:38 -07:00
Scott Lahteine
c5e51f6b96
finished => completed
2016-07-14 11:46:35 -07:00
Scott Lahteine
1618870c84
card.printingHasFinished does print_job_timer.stop
2016-07-14 11:39:58 -07:00
Scott Lahteine
34da77dad3
Simply run M31 at the end of an SD print
2016-07-14 11:39:58 -07:00
Scott Lahteine
23d2bc5ab0
Patch Greek for new strings
2016-07-14 11:39:58 -07:00
Scott Lahteine
a8d71f0ac6
Support longer print times in M31
2016-07-14 11:39:58 -07:00
Scott Lahteine
e481b79af1
Allow stopwatch and printcounter to go over 18 hours
2016-07-14 11:39:57 -07:00
João Brázio
68c343a09a
Added G12 configuration options to all configs
2016-07-14 00:38:42 +01:00
João Brázio
4937f9ada4
Minor G12 tweaks and point_t struct extension
2016-07-14 00:07:36 +01:00
Scott Lahteine
6080924589
Merge pull request #4296 from jbrazio/feature/bqh2-update
...
Update the bq Hephestos 2 configuration
2016-07-13 13:18:09 -07:00
Scott Lahteine
ed89c71e53
Merge pull request #4291 from esenapaj/Follow-up-the-PR-#4278
...
Follow-up the PR #4278 (Fixups for PID_ADD_EXTRUSION_RATE and HOTENDS==1)
2016-07-13 13:17:03 -07:00
João Brázio
021544f572
Improves G12 zig-zag pattern
2016-07-13 21:14:56 +01:00
João Brázio
b05a75655a
Implements a nozzle cleaning pattern generator (G12)
2016-07-13 21:14:19 +01:00
João Brázio
005af84140
Update the bq Hephestos 2 configuration
2016-07-13 21:06:31 +01:00
esenapaj
8f03f0be9b
Follow-up the PR #4252 (Replace PLA/ABS preheating with generic)
2016-07-13 22:42:16 +09:00
esenapaj
c2c8ab4698
Follow-up the PR #4278 (Fixups for PID_ADD_EXTRUSION_RATE and HOTENDS==1)
2016-07-13 22:24:31 +09:00
Scott Lahteine
4f77adddbe
Merge pull request #4286 from thinkyhead/rc_debug_clean
...
Prefix and suffix in debug output
2016-07-12 20:49:15 -07:00
Scott Lahteine
e5c7af5ddc
Merge pull request #4222 from thinkyhead/rc_allow_cold_extrude
...
M302: Add "P" parameter, status output
2016-07-12 20:40:14 -07:00
Scott Lahteine
2224032568
Merge pull request #4285 from thinkyhead/rc_manual_move_fast_fine
...
No delay for the smallest LCD moves
2016-07-12 20:16:38 -07:00
Scott Lahteine
cdd77d23bb
Neaten up temperature member data
2016-07-12 20:04:15 -07:00
Scott Lahteine
d4c68279c8
Add "P" parameter to M302
2016-07-12 20:04:15 -07:00
Scott Lahteine
a5bae3c7d5
Merge pull request #4229 from blubbfish/patch-1
...
Update language_de.h for German translation
2016-07-12 20:01:46 -07:00
Scott Lahteine
a8b6b6a128
Merge pull request #4252 from thinkyhead/rc_rename_hpb
...
Replace PLA/ABS preheating with generic
2016-07-12 20:00:33 -07:00
Scott Lahteine
1e14df876d
Use varname as prefix in DEBUG_POS, string as suffix
2016-07-12 19:58:09 -07:00
Scott Lahteine
9e8b3e5ee6
Homing direction is irrelevant in probe raise!
2016-07-12 18:09:02 -07:00
Scott Lahteine
ecd5e810ac
No delay for the smallest LCD moves
2016-07-12 18:09:01 -07:00
Scott Lahteine
2b9515d60f
Merge pull request #4281 from AnHardt/lang-system
...
Don't use UTF-strlen() if the text is not UTF
2016-07-12 17:21:28 -07:00
Scott Lahteine
973a669aa3
Merge pull request #4264 from thinkyhead/rc_ultralcd_encoder_pos
...
Remove extraneous conditions for encoder position
2016-07-12 16:54:13 -07:00
Scott Lahteine
e9f62d8fdb
Remove extraneous conditions for encoder position
2016-07-12 16:41:00 -07:00
Scott Lahteine
7c81398f95
Merge pull request #4279 from esenapaj/Follow-up-the-PR-#4271
...
Follow-up the PR #4271 (X_DUAL_STEPPER_DRIVERS)
2016-07-12 16:39:37 -07:00
Scott Lahteine
0554b65d22
Merge pull request #4284 from thinkyhead/rc_serial_ln_macros
...
Sled-probe sanity fix, conditionals for remaining types of leveling
2016-07-12 16:36:33 -07:00
Scott Lahteine
655c3fd55f
Move delta ABL sanity checks up
2016-07-12 16:10:16 -07:00
Scott Lahteine
db0882d068
AUTO_BED_LEVELING_3POINT and DELTA_BED_LEVELING_GRID
2016-07-12 16:10:11 -07:00
Scott Lahteine
e974ac63ef
Init matrix in planner.init
2016-07-12 15:55:27 -07:00
Scott Lahteine
47d55513ec
Merge pull request #4280 from AnHardt/msg-file-upload
...
Finalalize MSG_SD_WRITE_TO_FILE message with a \n
2016-07-12 13:02:52 -07:00
AnHardt
b273736962
Make MAPPER_NON the fall back mapper
...
Make MAPPER_NON the fall back mapper - if no other is defined.
One list less to maintain.
2016-07-12 19:59:14 +02:00
AnHardt
54d35230df
Don't use UTF-strlen() if the text is not UTF
2016-07-12 19:59:03 +02:00
Scott Lahteine
a1de96d152
Merge pull request #4278 from thinkyhead/rc_more_hotends_1
...
Fixups for PID_ADD_EXTRUSION_RATE and HOTENDS==1
2016-07-12 10:36:13 -07:00
AnHardt
87957c7b44
Finalalize MSG_SD_WRITE_TO_FILE message with a \n
...
Finalalize MSG_SD_WRITE_TO_FILE message with a \n
else RH hangs.
2016-07-12 13:13:04 +02:00
esenapaj
9b5cbf2423
Follow-up the PR #4271 (X_DUAL_STEPPER_DRIVERS)
...
・Update a forgotten Configuration_adv.h of K8400
2016-07-12 17:50:49 +09:00
Scott Lahteine
809da999dc
Apply HOTEND_INDEX in preheat methods
2016-07-11 22:27:25 -07:00
Scott Lahteine
3d78b690e5
Single PID dataset with HOTENDS == 1
2016-07-11 22:27:24 -07:00
Scott Lahteine
bf9967c65d
Apply HOTEND_INDEX in MILLISECONDS_PREHEAT_TIME
2016-07-11 22:27:24 -07:00
Scott Lahteine
11dcbae7a2
Only a single E axis. Can tool-change reseed position[E_AXIS]?
2016-07-11 22:27:24 -07:00
Scott Lahteine
4865447830
Merge pull request #4276 from esenapaj/Suppress-warnings
...
Suppress warnings
2016-07-11 19:08:59 -07:00
Scott Lahteine
815df28b0b
Merge pull request #4274 from esenapaj/Follow-up-the-PR-#4024
...
Follow-up the PR #4024 (Greek Language by @psavva)
2016-07-11 19:04:44 -07:00
Scott Lahteine
44f739a5eb
Merge pull request #4273 from esenapaj/Fix-for-the-PR-#4256
...
Fix for the PR #4256 (Additional tweaks for HOTENDS == 1)
2016-07-11 19:02:45 -07:00
Scott Lahteine
02f711fe00
Merge pull request #4275 from AnHardt/dont-deploy
...
Don't deploy/stow the probe if z-min-endstop is used for homing
2016-07-11 18:46:23 -07:00
Scott Lahteine
6a45aad893
Merge pull request #4272 from AnHardt/m100-rep
...
Repair M100
2016-07-11 18:45:13 -07:00
Scott Lahteine
243ad4312a
Merge pull request #4271 from thinkyhead/rc_X_DUAL_STEPPER_DRIVERS
...
X_DUAL_STEPPER_DRIVERS
2016-07-11 18:38:45 -07:00
Scott Lahteine
6e68dd292b
Merge pull request #4243 from thinkyhead/rc_fix_static_scrolling
...
Improve STATIC_ITEM implementation
2016-07-11 18:25:00 -07:00
Scott Lahteine
d17b161832
Don't draw current screen if simply changing screens
2016-07-11 18:14:04 -07:00
Scott Lahteine
096f9981d1
Scroll to the top when changing screens
2016-07-11 18:14:04 -07:00
Scott Lahteine
7ae84d768e
Tweak conditionals for REPRAPWORLD_KEYPAD
2016-07-11 18:14:04 -07:00
Scott Lahteine
155af6b861
Rename vars, add comments for menu macros
2016-07-11 18:14:04 -07:00
Scott Lahteine
31f2cf5f6f
Make encoderLine signed for proper compares
2016-07-11 18:14:03 -07:00
Scott Lahteine
d9f75f62c0
START_ROW => START_COL
2016-07-11 18:14:03 -07:00
Scott Lahteine
d2099fef0d
Left-justify thermistor info
2016-07-11 18:14:03 -07:00
Scott Lahteine
85aeb02aa6
Invert headings on Graphical LCD
2016-07-11 18:14:03 -07:00
Scott Lahteine
3a67fb77b0
Concatenate LCD static strings
2016-07-11 18:14:02 -07:00
Scott Lahteine
13dc619f43
Scroll static screens more simply
2016-07-11 18:14:02 -07:00
Scott Lahteine
5051723c2e
Redraw after cursor correction in STATIC_ITEM
2016-07-11 18:14:02 -07:00
esenapaj
58177a1602
Suppress warnings
2016-07-12 08:22:24 +09:00
Scott Lahteine
10ebf28ee3
Allow override of ENCODER_FEEDRATE_DEADZONE, lower default for Viki
2016-07-11 15:43:08 -07:00
Scott Lahteine
9b1ba1012a
Support for VIKI2 with MKS Gen 1.3 / 1.4
2016-07-11 15:43:08 -07:00
Scott Lahteine
55dc8051d8
Cleanup of RAMPS LCD pins
2016-07-11 15:38:55 -07:00
AnHardt
7bcab26f2a
Don't deploy/stow the probe if z-min-endstop is used for homing
...
Don't deploy/stow the probe if z-min-endstop is used for homing.
Don't apply `zprobe_zoffset` if probe was not used.
2016-07-11 22:01:44 +02:00
esenapaj
84ded1f659
Follow-up the PR #4024 (Greek Language by @psavva)
...
・Update forgotten Configuration.h of K8400
2016-07-12 04:19:09 +09:00
esenapaj
6af525e252
Fix for the PR #4256 (Additional tweaks for HOTENDS == 1)
2016-07-12 03:51:29 +09:00
AnHardt
23e0134596
Repair M100
...
M100 D was running too long - caused watchdog resets.
M100 I showed more free memory than a Arduino Mega has RAM.
2016-07-11 20:44:30 +02:00
Scott Lahteine
4b4a582c4f
X_DUAL_STEPPER_DRIVERS implementation
2016-07-11 10:22:19 -07:00
Scott Lahteine
91bd6eade7
X_DUAL_STEPPER_DRIVERS configuration option
2016-07-11 10:22:19 -07:00
Scott Lahteine
6121c9018a
Merge pull request #4265 from thinkyhead/rc_buzzer_patchup
...
Two strategies to address a stuck buzzer
2016-07-10 19:46:15 -07:00
Scott Lahteine
4a100c6832
Merge pull request #4250 from AnHardt/wait-for-cooling-slope
...
Adjust wait_for_cooling slope
2016-07-10 19:45:23 -07:00
Scott Lahteine
ed018c98d5
Merge pull request #4024 from thinkyhead/rc_greek_language
...
Greek Language by @psavva
2016-07-10 19:42:09 -07:00
Scott Lahteine
d1dffc7ad1
timestamp => endtime
2016-07-10 19:36:46 -07:00
Scott Lahteine
71674059c3
Two strategies to address a stuck buzzer
2016-07-10 19:25:23 -07:00
Scott Lahteine
928ff6487a
Greek language pack from @psavva
2016-07-10 18:59:04 -07:00
AnHardt
e92e58df1f
Adjust wait_for_cooling slope
...
Adjust wait_for_cooling slope
and drop mintemp for cooling.
See
https://github.com/MarlinFirmware/Marlin/pull/4169#issuecomment-231544532
2016-07-11 03:36:23 +02:00
Scott Lahteine
167f4aa0cc
Merge pull request #4259 from clexpert/patch-3
...
Update language_cz.h
2016-07-10 18:26:23 -07:00
Scott Lahteine
8dda05e92a
Merge pull request #4258 from clexpert/patch-2
...
Total print time for LCD correction (hours:minutes format)
2016-07-10 18:25:18 -07:00
Scott Lahteine
182c8d7f8f
Dyze High Temp Thermistor Support
2016-07-10 17:59:05 -07:00
Scott Lahteine
5b0e46c986
Merge pull request #4256 from thinkyhead/rc_fix_singlenozzle_temp
...
Additional tweaks for HOTENDS == 1
2016-07-10 17:57:00 -07:00
Scott Lahteine
ee0983ab57
Further reduction when HOTENDS == 1
2016-07-10 16:54:30 -07:00
Scott Lahteine
3e1bbd5e27
Indentation in gcode_M100
2016-07-10 16:33:51 -07:00
Scott Lahteine
b72238f406
Invariant get_pid_output with HOTENDS < 2
2016-07-10 16:33:51 -07:00
Petr Zahradnik
66602f4af6
Update language_cz.h
...
New strings:
#define MSG_HALTED
#define MSG_PLEASE_RESET
Some texts shortened for smaller displays.
2016-07-10 13:25:50 +02:00
Petr Zahradnik
eaf9e615ce
Total print time for LCD correction (hours:minutes format)
2016-07-10 13:08:05 +02:00
esenapaj
9e56d5825e
Adjust spacing
2016-07-10 14:25:29 +09:00
esenapaj
5832f4b848
Follow-up the PR #4253 (Runout Sensor without SD Card, Print Timer support in M104)
...
・Update forgotten example configuration files
2016-07-10 14:24:57 +09:00
Scott Lahteine
77283f5bf0
Merge pull request #4245 from thinkyhead/rc_simpler_therm_check
...
Simpler/extensible thermistor test in thermistortables.h
2016-07-09 21:13:42 -07:00
Scott Lahteine
f9e08b1fcd
Merge pull request #4254 from AnHardt/killscreen
...
Add a kill-screen
2016-07-09 20:44:42 -07:00
AnHardt
faac2bcfdb
Add a kill-screen
2016-07-10 04:50:45 +02:00
Scott Lahteine
3b3e52616c
Merge pull request #4253 from thinkyhead/rc_clexpert_runout
...
Runout Sensor without SD Card, Print Timer support in M104
2016-07-09 19:10:36 -07:00
Scott Lahteine
aa3ab93971
Merge pull request #4240 from AnHardt/sampler-8-7-16
...
Today's fix and cleanup collection
2016-07-09 19:09:45 -07:00
Scott Lahteine
4cd045791c
Reduce code size by trusting the compiler
2016-07-09 18:17:44 -07:00
Scott Lahteine
a8538bd7ce
General cleanup, code reduction in Marlin_main.cpp
2016-07-09 18:17:44 -07:00
Scott Lahteine
1026e5b071
Replace PLA/ABS preheating with generic
2016-07-09 18:06:51 -07:00
Petr Zahradnik
e282d69f63
Print job timer comment changed
2016-07-09 17:57:54 -07:00
Petr Zahradnik
a2159cfbc3
Error message change in SanityCheck.h
2016-07-09 17:57:54 -07:00
Petr Zahradník junior
315b4c2153
Runout sensor without SD Card
2016-07-09 17:57:53 -07:00
Scott Lahteine
51c9c3fe2c
Indentation in MarlinSerial.cpp
2016-07-09 17:57:53 -07:00
Scott Lahteine
e03414b2dd
Simpler/extensible thermistor test in thermistortables.h
2016-07-08 19:54:45 -07:00
AnHardt
4b44a23a36
Add TX-buffer for MarlinSerial
...
Similar to the current Arduino HardwareSerial
but with max. 256 byte buffer-size.
Deactivated by default.
The boards with AT90USB processor (USBCON) already use a TX-buffer.
2016-07-08 17:25:21 +02:00
AnHardt
468f7f03a2
homeaxis() can leave early
...
when no known axis needs to be homed.
Most changes are only caused from altering the indentation.
```
if (axis == X_AXIS ? HOMEAXIS_DO(X) : axis == Y_AXIS ? HOMEAXIS_DO(Y) : axis == Z_AXIS ? HOMEAXIS_DO(Z) : 0) {
...
}
to
if (!(axis == X_AXIS ? HOMEAXIS_DO(X) : axis == Y_AXIS ? HOMEAXIS_DO(Y) : axis == Z_AXIS ? HOMEAXIS_DO(Z) : 0)) return;
...
```
2016-07-08 15:59:33 +02:00
AnHardt
eff7912243
Ensble/disable hardware endstops in G28 globally.
...
For moving away from the endstops we do not have to disable them.
They are not tested anyway.
2016-07-08 15:49:10 +02:00
AnHardt
f69434d81c
Eliminate void setup_for_endstop_move()
2016-07-08 15:23:20 +02:00
AnHardt
0ea6247fc2
Use logic in Z_SAFE_HOMING
...
Use logic in Z_SAFE_HOMING
From
```
if (home_all_axis || homeZ) {
if (home_all_axis) {
...
home z
}
else if (homeZ) { // Don't need to Home Z twice
home z
}
}
```
to
```
if (home_all_axis || homeZ) {
if (home_all_axis) {
...
}
home z
}
```
2016-07-08 15:08:50 +02:00
AnHardt
de3a169336
Always define MIN_Z_HEIGHT_FOR_HOMING even if 0
...
Always define MIN_Z_HEIGHT_FOR_HOMING even if 0
Always make a potential rise to `home_offset[Z_AXIS]` possible in G28.
Get rid of some very ugly constructs in MBL (ultralcd.cpp).
2016-07-08 15:08:32 +02:00
AnHardt
88ed232f53
Remove HAS_BED_PROBE case in first raise in G28
...
Differentiating made sense here when we could save a dozen lines of code,
but not for one line.
2016-07-08 14:59:44 +02:00
AnHardt
653eff3b31
Clean up quick_home_xy()
...
Since we do the actual homing now in the 'normal' routines `quick_home_xy()`
can be simplified to a relative simple diagonal move.
2016-07-08 14:59:27 +02:00
Scott Lahteine
98d0167a57
Merge pull request #4226 from thinkyhead/rc_emergency_command_parser
...
MarlinSerial emergency-command parser (with M108)
2016-07-07 16:53:55 -07:00
Scott Lahteine
2ee4e4f791
Make wait_for_heatup volatile
2016-07-07 16:37:23 -07:00
Scott Lahteine
bd5a825b8b
Wait for end of line before invoking action
2016-07-07 16:37:23 -07:00
Scott Lahteine
ea47803ae2
Simplify emergency parser (only parse initial command)
2016-07-07 16:37:22 -07:00
Scott Lahteine
834ad14c8d
Add quickstop_stepper to update current position with stepper.quick_stop()
2016-07-07 16:37:22 -07:00
Scott Lahteine
ecffe92e20
Group EMERGENCY_PARSER commands
2016-07-07 16:37:22 -07:00
AnHardt
a129078927
Add an emergency-command parser to MarlinSerial (supporting M108)
...
Add an emergency-command parser to MarlinSerial's RX interrupt.
The parser tries to find and execute M108,M112,M410 before the commands disappear in the RX-buffer.
To avoid false positives for M117, comments and commands followed by filenames (M23, M28, M30, M32, M33) are filtered.
This enables Marlin to receive and react on the Emergency command at all times - regardless of whether the buffers are full or not. It remains to convince hosts to send the commands. To inform the hosts about the new feature a new entry in the M115-report was made. "`EMERGENCY_CODES:M112,M108,M410;`".
The parser is fast. It only ever needs two switch decisions and one assignment of the new state for every character.
One problem remains. If the host has sent an incomplete line before sending an emergency command the emergency command could be omitted when the parser is in `state_IGNORE`.
In that case the host should send "\ncommand\n"
Also introduces M108 to break the waiting for the heaters in M109, M190 and M303.
Rename `cancel_heatup` to `wait_for_heatup` to better see the purpose.
2016-07-07 16:37:22 -07:00
Scott Lahteine
9f42b1a075
Merge pull request #4235 from thinkyhead/rc_revert_quickhome_test
...
Fix quick homing, tweak MIN_Z_HEIGHT_FOR_HOMING
2016-07-07 13:37:14 -07:00
Scott Lahteine
ad968f2325
Merge pull request #4234 from thinkyhead/rc_better_position_logging
...
Move XYZ in print_xyz and DEBUG_POS to the front
2016-07-07 12:31:15 -07:00
Scott Lahteine
4036c73cdd
Don't raise Z if only homing Z
2016-07-07 12:28:37 -07:00
Scott Lahteine
0b6f8f8244
Apply MIN_Z_HEIGHT_FOR_HOMING raise literally
2016-07-07 12:25:02 -07:00
Scott Lahteine
177ec20bf0
Revert quick-home changes
2016-07-07 12:17:34 -07:00
Scott Lahteine
9c5b462ef2
Move XYZ in print_xyz and DEBUG_POS to the front
2016-07-07 11:42:19 -07:00
Scott Lahteine
4e84c803a3
Merge pull request #4232 from thinkyhead/rc_no_axis_codes_needed
...
Don't use axis_codes if a literal will do
2016-07-06 20:05:16 -07:00
Scott Lahteine
e2f7cb0905
Don't use axis_codes if a literal will do
2016-07-06 18:37:21 -07:00
Scott Lahteine
6559f7359f
Fix comment on Z raise for homing, save a few bytes
2016-07-06 16:21:51 -07:00
Scott Lahteine
799c60cadc
Merge pull request #4217 from thinkyhead/rc_fix_homing_raise
...
Don't do_probe_raise with MIN_Z_HEIGHT_FOR_HOMING
2016-07-06 14:39:37 -07:00
Scott Lahteine
d7e9647505
Sanity Check for probe raises
2016-07-06 13:46:06 -07:00
Scott Lahteine
d0b29cabf3
Don't re-home X and Y if you quick homed
2016-07-06 13:46:06 -07:00
Scott Lahteine
e0a6b978f5
Don't do_probe_raise with MIN_Z_HEIGHT_FOR_HOMING
2016-07-06 13:46:05 -07:00
Philip Schell
cf8ec1216a
Update language_de.h for German translation
...
@MarlinFirmware/language-team my changes for the German language. Feel free to improve :)
2016-07-06 21:44:16 +02:00
petrzjunior
b81b77111b
Update language_cz.h
2016-07-06 21:04:34 +02:00
Scott Lahteine
7735ec5e7a
Merge pull request #4223 from thinkyhead/rc_rename_heatup
...
Change cancel_heatup to wait_for_heatup
2016-07-06 11:25:44 -07:00
Scott Lahteine
160a2be117
Change cancel_heatup to wait_for_heatup
2016-07-06 09:17:50 -07:00
AnHardt
16c83d203b
Make use of the good features of a sled probe for all probes.
...
Move and extend axis_unhomed test to deploy/stow_z_probe().
Move and extend position store/restore to deploy/stow_z_probe().
Now all kinds of probes can use the 'E' parameter in G29/M48.
Allen key probes can be used now for grid and 3-point levelling.
Deploying the Allen Key probe uses big moves in z direction.
Too dangerous for an unhomed z-axis.
Throw a compile time error when we try to configure an
Allen Key probe homing to z-min and having no other z-min-endstop.
2016-07-06 04:11:04 +02:00
AnHardt
8555816a11
Generalize and simplify 'triggered when stowed test`
...
The `PROBE_IS_TRIGGERED_WHEN_STOWED_TEST` is able to detect if a probe is
successfully deployed/stowed.
It was part of the Allen Key probes code only.
Now the function is generally available.
Currently this test is compulsory for Allen Key probes to not alter the used behaviour
If you want to add the test for an other type of probe simply add
```
#define PROBE_IS_TRIGGERED_WHEN_STOWED_TEST
```
to your config.
2016-07-06 03:56:17 +02:00
AnHardt
5126cce7fd
Move Allen Key probe move scripts to their own functions
...
There was an hidden extra move after the scripts. This is configurable now.
Added the extra moves to the relevant configs.
2016-07-06 03:46:40 +02:00
AnHardt
7d063c111c
Add a optional feedrate parameter to do_blocking_move()
...
Add a optional feedrate parameter to `do_blocking_move()` and its companions.
2016-07-06 03:46:34 +02:00
Scott Lahteine
b114b6a0b3
Save 152 bytes using uint8_t for command indices
2016-07-05 16:29:28 -07:00
Scott Lahteine
0d4ff0c48b
Allow the queue to be cleared from within commands
2016-07-05 16:25:20 -07:00
Scott Lahteine
c450851401
Merge pull request #4209 from AnHardt/too-high-G28
...
Make raise for probe deploy relative in homeaxis()
2016-07-05 11:07:42 -07:00
AnHardt
f799f18388
MBL typo
2016-07-05 18:19:53 +02:00
AnHardt
8b02e68cb6
Make raise for probe deploy relative in homeaxis()
...
Make raise for probe deploy relative in homeaxis()
by setting `current_position[axis]` to zero later.
2016-07-05 10:42:33 +02:00
Scott Lahteine
e48502866b
Merge pull request #3611 from alephobjects/M108_cancel_heatup
...
Introduce M108 cancel wait for heatup/cooldown of the hotend and bed
2016-07-04 01:19:31 -07:00
Scott Lahteine
d70197f514
Merge pull request #4204 from thinkyhead/rc_fix_gcode_t_position
...
Additional patches for gcode_T position change
2016-07-04 01:16:22 -07:00
Scott Lahteine
869b517589
Merge pull request #4205 from thinkyhead/rc_fixup_unit_references
...
References to millimeters in code comments need an update
2016-07-04 01:15:34 -07:00
Scott Lahteine
e104b91ea6
References to millimeters in code comments need an update
2016-07-03 20:13:29 -07:00
AnHardt
ff91d28a3a
Remove wants_to_cool warning
...
Remove wants_to_cool warning
2016-07-04 03:12:11 +02:00
Scott Lahteine
c9e536cf87
Additional patches for gcode_T position change
2016-07-03 18:11:02 -07:00
Scott Lahteine
60865fc45b
Merge pull request #4202 from thinkyhead/rc_fix_gcode_t_position
...
Fix position adjustment with gcode_T and MBL
2016-07-03 17:55:43 -07:00
Scott Lahteine
f841038313
Merge pull request #4201 from thinkyhead/rc_info_fit
...
Shorter labels for Print Stats info
2016-07-03 17:47:00 -07:00
Scott Lahteine
f31af61ee2
Fix position adjustment with gcode_T and MBL
2016-07-03 17:44:04 -07:00
Scott Lahteine
a8f5c2bf96
Merge pull request #4192 from birkett/k8400
...
Add Velleman K8400 board support.
2016-07-03 17:41:13 -07:00
Scott Lahteine
ef8980bfa0
Shorter labels for Print Stats info
2016-07-03 16:00:24 -07:00
Scott Lahteine
2ed625dafa
Fix compiler warnings for static screens
2016-07-03 15:26:17 -07:00
Anthony Birkett
e77844594d
readme.md -> README.md
2016-07-03 22:15:24 +01:00
Anthony Birkett
a0b00d29e3
Add a ported example configuration for the Velleman K8400 (Vertex) printer.
...
Supports both dual and single head printers (with the correct config).
Includes community sourced feed rate fix.
Rename / move files.
Remove redundant definitions.
2016-07-03 22:09:08 +01:00
lrpirlet
9b42c6b44b
apply correction when swtiching from MBL to physical in G28 X
2016-07-03 21:43:42 +02:00
Andrea Cimbalo
46196e9ee5
Add working PlatformIO support
2016-07-03 15:33:24 +02:00
esenapaj
95347fc650
Follow-up the PR #3662 (Rewritten FILAMENT_CHANGE_ENABLE feature)
...
・Update a forgotten Configuration_adv.h of Cartesio
2016-07-03 09:04:29 +09:00
Scott Lahteine
a06c5165a7
Shorter strings for smaller LCDs
2016-07-02 15:47:16 -07:00
Scott Lahteine
982f10e6a0
Use STATIC_ITEM for LCD message display
2016-07-02 15:47:15 -07:00
Petr Zahradnik
43ff0ce35f
Rewritten FILAMENT_CHANGE_ENABLE feature
2016-07-02 15:34:33 -07:00
Scott Lahteine
51b7820686
Patch up About Printer sub-menus
2016-07-02 15:22:34 -07:00
Scott Lahteine
439e78147d
Static menu items take an optional string, LJ by default
2016-07-02 15:22:34 -07:00
Scott Lahteine
fa9b2a925d
Tweak spacing in printcounter.cpp
2016-07-02 15:22:33 -07:00
Scott Lahteine
dbfc87cdcf
Squish sanity check for build info
2016-07-02 15:22:33 -07:00
Anthony Birkett
7a377c1d75
Add "About Printer" information menu.
...
Includes:
*firmware version / branch / date.
*extruder count
*board information (name, serial details, power supply type)
*thermistors (names, min/max temperatures)
*printer statistics (PRINTCOUNTER details)
Thanks to @thinkyhead for contributions.
2016-07-02 15:22:26 -07:00
Scott Lahteine
77a923d8ce
Merge pull request #4186 from thinkyhead/rc_array_macros
...
Simplified variable-size array macros
2016-07-01 20:48:12 -07:00
Scott Lahteine
e650a75b88
Simplified variable-size array macros
2016-07-01 20:36:05 -07:00
Scott Lahteine
ac4f235912
Merge pull request #4167 from thinkyhead/rc_eeprom_checksum
...
EEPROM Checksum
2016-07-01 19:22:49 -07:00
esenapaj
03b8f88092
Tab to Space
2016-07-02 08:07:33 +09:00
AnHardt
cb1b31f69b
Unconditional do_probe_raise() in probe_pt()
...
If Z_RAISE_BETWEEN_PROBINGS is null or undefined the probe is currently not raised by home_offset[Z_AXIS] and zprobe_zoffset.
But when different from 0 is.
If an undefined Z_RAISE_BETWEEN_PROBINGS expands to 0 (and it does) this is the solution.
A similar asymmetry exists with the newly introduced 'short-cut' in G28 - but its the rise before anything is probed - so should not make a difference.
2016-07-01 15:28:41 +02:00
Scott Lahteine
7ef7843fd4
Merge pull request #4181 from thinkyhead/rc_rename_a_move_func
...
Do interpolated moves for Allen Key deploy/stow
2016-06-30 16:30:09 -07:00
Scott Lahteine
6b2a7b30af
Extra comments to clarify EEPROM code
2016-06-30 16:28:01 -07:00
Scott Lahteine
787f394676
MAX_EXTRUDERS replaces mysterious "4"
2016-06-30 16:27:37 -07:00
Scott Lahteine
bc3748b7bc
Add shared Config_Postprocess for Read and Reset
2016-06-30 16:25:29 -07:00
Scott Lahteine
adcd0f5de3
Some formatting in configuration_store.cpp
2016-06-30 16:25:29 -07:00
Scott Lahteine
5e370006fc
EEPROM Checksum
2016-06-30 16:20:25 -07:00
Scott Lahteine
725fde8b26
Merge pull request #4169 from thinkyhead/rc_wait_but_break
...
Allow wait-for-cooling, break at threshold or if cooling stalls
2016-06-30 16:13:51 -07:00
Scott Lahteine
da6b0dab5f
Use prepare_move_to_destination for Allen Key deploy/stow
2016-06-30 16:09:43 -07:00
Scott Lahteine
c42f8fb8dd
Rename some movement sub-functions
2016-06-30 15:50:00 -07:00
Scott Lahteine
b6b3a4afbf
Merge pull request #4168 from thinkyhead/rc_viki2_for_ramps
...
Support for VIKI2 in RAMPS and derivatives
2016-06-30 01:48:50 -07:00
Scott Lahteine
f84d85f761
Cleanup extruder runout configs
2016-06-30 01:40:41 -07:00
Scott Lahteine
5e14a528dd
Always wait for cooling in M109/M190, break at low temp or if cooling stalls
2016-06-29 14:07:54 -07:00
Scott Lahteine
0b0b7aac6e
Support for VIKI2 in RAMPS and derivatives
2016-06-28 18:19:18 -07:00
Scott Lahteine
abda4ab427
Clean up CNControls pins
2016-06-28 16:56:48 -07:00
Scott Lahteine
683975cf90
Fix spelling in a config comment
2016-06-28 16:49:13 -07:00
Scott Lahteine
8268c0a9a0
Always define temp sensor, heater pins for RUMBA
2016-06-28 16:28:05 -07:00
Scott Lahteine
db19959735
Merge pull request #4161 from thinkyhead/rc_general_cleanup
...
Reduce storage requirements for strings, make some PGM
2016-06-27 20:46:26 -07:00
Scott Lahteine
2e96276bf4
More debug message cleanup
2016-06-27 20:36:19 -07:00
Scott Lahteine
dc2c0e5e24
Simpler debug output for deploy/stow
2016-06-27 20:36:18 -07:00
Scott Lahteine
bd491818d6
Reduce storage requirements for strings, make some PGM
2016-06-27 20:36:18 -07:00
Scott Lahteine
ee876dcd7a
Merge pull request #4159 from thinkyhead/rc_rigidbot_diff
...
Rigidbot V2 support - has MCP4728 digipot
2016-06-27 20:35:22 -07:00
Scott Lahteine
0c24e0e445
Support for newer Wire library
2016-06-27 20:25:03 -07:00
Scott Lahteine
ddb386c139
Init DAC_DISABLE_PIN in dac_init
2016-06-27 20:25:03 -07:00
AnHardt
e480ee0054
Further cleanup of G28 for probes
2016-06-27 20:19:51 -07:00
AnHardt
39883d03fc
universalize axis_unhomed_error()
2016-06-27 20:19:51 -07:00
AnHardt
e616093d4c
Simplify dock_sled()
...
`dock_sled()` is never called with offset parameter - remove it.
We move x only - so only that needs to be homed. Consequence is - we can home to z-min now with a sled probe!
Feedrates are set and restored in `do_blocking_move()`.
We already checked if the probe is deployed/stowed in deploy/stow_probe.
```
if (z_loc < _Z_RAISE_PROBE_DEPLOY_STOW + 5) z_loc = _Z_RAISE_PROBE_DEPLOY_STOW;
```
makes no sense - remove.
Now the raise is the same for deploy/stow -> move before the if.
Replace the if with a ternary.
Instead writing LOW/HIGH use the boolean `stow` we already have.
There is no reason for not using the sled probe in G29/M48 with 'E'.
It takes a while but works. (tested!)
2016-06-27 20:19:51 -07:00
Scott Lahteine
6c60869409
Support DAC_OR_ADDRESS in Printrboard too
2016-06-27 12:36:21 -07:00
Scott Lahteine
593c8bf286
Support for Rigidbot V2
2016-06-27 12:35:20 -07:00
Scott Lahteine
511503ede9
CARTESIO_UI has lcd contrast
2016-06-27 12:04:49 -07:00
Scott Lahteine
829c92f1ba
Use Z_RAISE_BETWEEN_PROBINGS with MBL
2016-06-26 15:39:11 -07:00
Scott Lahteine
eb1755208f
Merge pull request #4153 from thinkyhead/rc_probe_raise_options
...
Combine Z raise before/after options
2016-06-26 15:30:08 -07:00
Scott Lahteine
10da7ac86c
Combine Z raise before/after options
2016-06-26 13:56:30 -07:00
Scott Lahteine
9caa8941e2
Merge pull request #4149 from thinkyhead/rc_minimum_raise_in_probe_pt
...
Ensure a minimum height before XY move in probe_pt
2016-06-25 19:35:58 -07:00
Scott Lahteine
3fa631130f
Ensure a minimum height before XY move in probe_pt
2016-06-25 19:19:31 -07:00
Scott Lahteine
a7684eef7a
Squish code in ST7920
2016-06-25 18:35:15 -07:00
AnHardt
b4076883cc
Set testet delays for K8200, RAMBO, MINIRAMBO and ST7920
2016-06-25 18:35:15 -07:00
AnHardt
4454d80276
Decrease the needed nops to 1
...
by shitfing the left shift into the high phase.
```
2 cbi 0x2,1 ;set CLK //
1 in r18,__SREG__ //1
1-3 sbrc r24,7 //2-4
2 rjmp .L19 //4
1 cli .L19: //5
2 lds r25,258 lds r25,258 //7
1 andi r25,lo8(-2) ori r25,lo8(1) //8
2 sts 258,r25 sts 258,r25 //10
1 out __SREG__,r18 out __SREG__,r18 //11
2 .L3: rjmp .L3 //13 //2
2 sbi 0x2,1 ;reset CLK // //13-15 //2-4
1 lsl r24 ; val //1
1 nop //2
2 cbi 0x2,1 ;set CLK //4
...
```
2016-06-25 18:35:15 -07:00
AnHardt
56c42b572c
3 ms speedup for ST7920 and delay for BOARD_3DRAG
...
and saving ~1k memory
by limiting the `#pragma GCC optimize (3)` optimisation to `ultralcd_st7920_u8glib_rrd.h`. These optimisation was and is not done for all the other displays, is the reason for the big additionally use of memory, because the complete 'ultralcd.cpp' and 'dogm_lcd_implementation.h' was optimised (sadly i did not observe a change in speed).
Unrolling the loop in `ST7920_SWSPI_SND_8BIT()`, what i expected the optimiser to do, by hand, saved some speed by eliminating the loop variable (i) compares and increases. Every CPU cycle in this loop costs at least 0.5ms per display update because it's executed more than 1k times/s.
The delays are now pre-filled with the calculated values for 4.5V driven ST7920.
A way to simply add __your__ timing into the configuration was made.
At 4.5V
1.) The CLK signal needs to be at least 200ns high and 200ns low.
2.) The DAT pin needs to be set at least 40ns before CLK goes high and must stay at this value until 40ns after CLK went high.
A nop takes one processor cycle.
For 16MHz one nop lasts 62.5ns.
For 20MHz one not lasts 50ns.
To fulfill condition 1.) we need 200/62.5 = 3.2 => 4 cycles (200/50 = 4 => 4). For the low phase, setting the pin takes much longer. For the high phase we (theoretically) have to throw in 2 nops, because changing the CLK takes only 2 cycles.
Condition 2.) is always fulfilled because the processor needs two cycles (100 - 125ns) for switching the CLK pin.
Needs tests and feedback.
Especially i cant test 20MHz, 3DRAG and displays supplied wit less than 5V.
Are the delays right? Please experiment with longer or shorter delays. And give feedback.
Already tested are 5 displays with 4.9V - 5.1V at 16MHz where no delays are needed.
2016-06-25 18:35:15 -07:00
Scott Lahteine
ca184d3d72
Merge pull request #4147 from thinkyhead/rc_fix_M48_raise
...
Fix debug output in probe_pt
2016-06-25 18:15:33 -07:00
Scott Lahteine
b4161cbd98
Fix debug output in probe_pt
2016-06-25 17:59:03 -07:00
Edward Patel
da88b00585
MBL: Add support for max z endstop
...
See https://github.com/MarlinFirmware/Marlin/issues/4088
2016-06-25 21:58:02 +02:00
Scott Lahteine
74878d1f16
Always do a brief delay in lcd_quick_feedback
2016-06-24 14:46:10 -07:00
Scott Lahteine
7de7552069
Merge pull request #4133 from MagoKimbra/Single_home_axis_delta
...
Single home Axis Delta need simple sync_plan_position
2016-06-23 21:14:22 -07:00
Scott Lahteine
15a6b49f37
Simplified probe_pt (in G30)
2016-06-23 20:25:46 -07:00
Scott Lahteine
6a7045b9bf
Remove clean_up_after_endstop_move
2016-06-23 20:23:19 -07:00
Scott Lahteine
2a4f866561
Simplified probe_pt (in G29)
2016-06-23 20:22:28 -07:00
Scott Lahteine
89a2aa026b
Simplified probe_pt (in M48)
2016-06-23 19:22:45 -07:00
Scott Lahteine
f8530c5d1f
Simplified probe_pt function (G28 grid)
2016-06-23 19:09:32 -07:00
Scott Lahteine
c376c08042
Simplified probe_pt function (part 1)
2016-06-23 19:00:29 -07:00
Scott Lahteine
9a71b7f8ad
Fix debug message for 3-point leveling
2016-06-23 18:17:31 -07:00
Scott Lahteine
550c03a5a9
Drop raise_z_after_probing function
2016-06-23 18:11:54 -07:00
Scott Lahteine
bb38c816af
Always raise in deploy_z_probe / stow_z_probe
2016-06-23 18:00:20 -07:00
Scott Lahteine
68f3350050
Cleanup M401 / M402
2016-06-23 17:04:41 -07:00
Scott Lahteine
3afda99adf
Regular handlers for G31 / G32
2016-06-23 17:04:13 -07:00
Scott Lahteine
6803c8e37e
Move Z up before, or down after XY, for "blocking move"
2016-06-23 15:50:13 -07:00
Scott Lahteine
03c70c1990
SERVO_DEACTIVATION_DELAY => SERVO_DELAY
2016-06-23 14:33:29 -07:00
MagoKimbra
570f3bbc07
Single home Axis Delta need simple sync_plan_position
2016-06-23 23:09:47 +02:00
Scott Lahteine
61f34eec03
Merge pull request #4125 from jbrazio/bugfix/planner-warning
...
Fixes some compiler warnings
2016-06-22 19:34:37 -07:00
Scott Lahteine
bdcd628896
Merge pull request #4126 from thinkyhead/rc_lin_timing_patch
...
Patch LIN_ADVANCE timing issue
2016-06-22 19:24:44 -07:00
João Brázio
664232140d
Fixes somes compiler warnings
2016-06-23 03:12:55 +01:00
Sebastianv650
0c5192b288
Patch LIN_ADVANCE timing issue
...
Also the extruder stepper ISR has to keep an eye on step_loops count.
2016-06-22 19:05:14 -07:00
Scott Lahteine
d4134e6901
Define Z_SAFE_HOMING point when Z_PROBE_SLED is activated alone
2016-06-22 17:51:32 -07:00
Scott Lahteine
7b2fadd598
Apply some fixes from Andreas
...
Derived from
https://github.com/AnHardt/Marlin/commit/6e8ede8c694fa4d9e3c769840b09d56
7f8d8e0dd
2016-06-22 17:35:59 -07:00
Scott Lahteine
bd01592816
Goodbye MECHANICAL_PROBE
2016-06-22 17:13:33 -07:00
Scott Lahteine
2640d13a9f
Simplify initial raise in M48
2016-06-22 16:53:04 -07:00
Scott Lahteine
3763d45656
Return Z position in run_z_probe
2016-06-22 16:52:32 -07:00
Scott Lahteine
1f48b5c30f
Pass a raise to probe_pt, not a Z position
2016-06-22 16:40:21 -07:00
Scott Lahteine
6fdd5ba246
Save and restore feedrate in more places
2016-06-22 16:40:20 -07:00
Scott Lahteine
fe173c2bc6
Generalized probe raise, use for after probing
2016-06-22 14:44:30 -07:00
Scott Lahteine
7da3080761
Simpler cleanup in G28 / G29
2016-06-22 14:44:30 -07:00
Scott Lahteine
15229d988b
Fix compile error for bed matrix in M48
2016-06-22 14:04:46 -07:00
Scott Lahteine
c01352cbd5
Add a dependency for z servo macros
2016-06-22 14:04:23 -07:00
Scott Lahteine
c3794bd695
Add HAS_PROBING_PROCEDURE conditional
2016-06-22 14:03:22 -07:00
Scott Lahteine
42ce60c5cc
Make sure NUM_SERVOS is set for Z servo endstop
2016-06-22 14:01:19 -07:00
Scott Lahteine
b590a7dee0
Make Z_RAISE_BETWEEN_PROBINGS a more general option
2016-06-22 14:00:44 -07:00
Scott Lahteine
bb9c67b4b5
Tweak some feedrate vars
2016-06-22 03:27:31 -07:00
Scott Lahteine
5158bd6e93
Screen out G29 E for sled and allen key, allow single probe
2016-06-22 03:20:33 -07:00
Scott Lahteine
ccae92588d
Cleanup debug in G28 and G29
2016-06-22 03:20:33 -07:00
Scott Lahteine
b4a9d2366c
Use a macro for kinematic sync_plan_position
2016-06-22 03:20:33 -07:00
Scott Lahteine
bfccf26294
Use sync_plan_position_delta where needed
2016-06-22 03:20:33 -07:00
Scott Lahteine
a6b8c67df4
Move probe deploy after setup call in G29
2016-06-22 03:20:33 -07:00
Scott Lahteine
e69916d1bd
Split up endstop_move functions
2016-06-22 03:20:33 -07:00
Scott Lahteine
0e18a4897b
Simpler handling of sled/allen-key in probe_pt
2016-06-22 03:20:33 -07:00
Scott Lahteine
1a92e2ef18
Comment on run_z_probe
2016-06-22 03:20:33 -07:00
Scott Lahteine
68e0e5855e
For all probes, at the end of G29 simply raise and stow
2016-06-22 03:20:33 -07:00
Scott Lahteine
c3023f8cc5
Make M401/M402 available with HAS_BED_PROBE
2016-06-22 03:20:33 -07:00
Scott Lahteine
9f0c255c69
Show uncorrected position in set_bed_level_equation_3pts
2016-06-22 03:20:33 -07:00
Scott Lahteine
07298ac992
Initialize current_position to home_offset on boot
2016-06-22 03:20:33 -07:00
Scott Lahteine
d50539583a
Make XY_PROBE_SPEED a general probe option
2016-06-22 03:04:47 -07:00
Scott Lahteine
2798499b71
XY_TRAVEL_SPEED => XY_PROBE_SPEED
2016-06-22 02:45:25 -07:00
Scott Lahteine
88dc543584
Add a macro for XY_TRAVEL_FEEDRATE
2016-06-22 02:23:50 -07:00
Scott Lahteine
117db77c55
make motor_current_setting static and constexpr
2016-06-21 19:50:08 -07:00
João Brázio
19fb04d761
Update bq Hephestos 2 config
2016-06-21 18:15:51 -07:00
Scott Lahteine
b0e47608e6
Merge pull request #4108 from esenapaj/Fix-for-PR-#4093
...
Fix for PR #4093 (Make Z Probe options independent of ABL), etc
2016-06-21 18:12:08 -07:00
Scott Lahteine
c84732e605
Merge pull request #4111 from esenapaj/Cosmetic-changes-and-small-fix-for-thermistortables.h
...
Cosmetic changes and small fix for thermistortables.h
2016-06-21 18:05:32 -07:00
Scott Lahteine
cdc661ea5e
Merge pull request #4110 from esenapaj/Small-cosmetic-changes-for-language-files
...
Small cosmetic changes for language files
2016-06-21 18:04:12 -07:00
Scott Lahteine
c8186e9423
Merge pull request #4109 from esenapaj/Enclose-#error-string-by-double-quotes
...
Enclose #error string by double-quotes
2016-06-21 18:03:30 -07:00
Scott Lahteine
40cd20a236
Fix comments on EXPERIMENTAL_I2CBUS
2016-06-21 17:58:44 -07:00
esenapaj
385945ca31
Cosmetic changes and small fix for thermistortables.h
...
・Adjust spacing
・Standardize comments position
・Remove ',' at the tail of array
2016-06-21 21:19:47 +09:00
esenapaj
fac58f0291
Cosmetic changes for language files
2016-06-21 21:13:25 +09:00
esenapaj
14b661b9e5
Enclose #error string by double-quotes
2016-06-21 21:06:14 +09:00
esenapaj
d583ea852d
Standardize format description of Panel
2016-06-21 20:51:27 +09:00
esenapaj
aa6d35bd49
Move code block of probe to appropriate position
2016-06-21 20:36:46 +09:00
esenapaj
740fb2ce39
Adjust spacing
2016-06-21 19:37:45 +09:00
esenapaj
f77f3ffa70
Remove duplicated Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX
2016-06-21 19:33:45 +09:00
Scott Lahteine
19fe93a5a9
Clean up configs for Z_MIN_PROBE_REPEATABILITY_TEST
2016-06-21 03:10:46 -07:00
Scott Lahteine
71a7408012
Merge pull request #4106 from thinkyhead/rc_temp_compile_err
...
Fix compile error with watch_bed_next_ms
2016-06-21 02:48:46 -07:00
Scott Lahteine
dcb8ec32ee
Fix compile error with watch_bed_next_ms
2016-06-21 02:13:41 -07:00
Scott Lahteine
3996242e9d
Allow Z_MIN_PROBE_REPEATABILITY_TEST solo
2016-06-21 01:56:40 -07:00
Scott Lahteine
26a9cd0b08
Move run_z_probe to earlier block
2016-06-21 01:25:23 -07:00
Scott Lahteine
7f8a2025af
Move raise_z_after_probing into earlier block
2016-06-21 01:03:40 -07:00
Scott Lahteine
2530371516
Always disable probe at the end of G29
2016-06-20 16:40:44 -07:00
Scott Lahteine
6aba98e470
Comment on setup_for_endstop_move
2016-06-20 16:40:44 -07:00
Scott Lahteine
04e88d008e
Clear up ordering in G30
2016-06-20 16:40:44 -07:00
Scott Lahteine
ed75b0ea11
Make clean_up function available for probes
2016-06-20 16:28:45 -07:00
Scott Lahteine
51d52cb52a
Make run_z_probe available for any bed probe
2016-06-20 16:02:36 -07:00
Scott Lahteine
f6b09cf465
Always use deploy/stow for dock_sled
2016-06-20 15:51:01 -07:00
Scott Lahteine
3b457c2dd3
Use deploy/stow with FIX_MOUNTED_PROBE too
2016-06-20 15:25:01 -07:00
Scott Lahteine
7e9d4a68d4
Always raise Z (if needed) for servo deploy/stow
2016-06-19 20:17:13 -07:00
Scott Lahteine
9beb3f2f5e
Merge pull request #4097 from thinkyhead/rc_fil_runout_cleanup
...
FIL_RUNOUT_INVERTING false by default
2016-06-19 19:46:14 -07:00
Scott Lahteine
f215b30932
Merge pull request #4093 from thinkyhead/rc_probe_without_abl
...
Make Z Probe options independent of ABL
2016-06-19 19:44:25 -07:00
Scott Lahteine
2fd2301928
FILRUNOUT => FIL_RUNOUT
2016-06-19 19:25:26 -07:00
Scott Lahteine
dfbf8b3c2c
FIL_RUNOUT_INVERTING false by default
2016-06-19 19:25:26 -07:00
Scott Lahteine
7b5cd314a5
Merge pull request #4095 from thinkyhead/rc_fil_runout_cleanup
...
Improve FILAMENT_RUNOUT_SENSOR, FILRUNOUT_PIN
2016-06-19 18:48:18 -07:00
Scott Lahteine
de12228758
Make Z Probe options independent of ABL
2016-06-19 18:47:27 -07:00
Scott Lahteine
add0032820
Improve FILAMENT_RUNOUT_SENSOR, FILRUNOUT_PIN
2016-06-19 18:13:33 -07:00
Scott Lahteine
f8c278ce4d
Cartesio UI display option in all configs
2016-06-19 17:39:46 -07:00
Scott Lahteine
400e13d136
Output a message for SD read errors
2016-06-19 17:14:56 -07:00
Roxy-3D
96b8bcca84
Merge pull request #4081 from thinkyhead/rc_tweaky_m48_tweaks
...
Cleanup of M48
2016-06-18 22:21:16 -05:00
Scott Lahteine
b7e3c1bbc4
Tweak M48 output conditions
2016-06-18 16:17:53 -07:00
Scott Lahteine
1dad912b03
Adjust M48 raise / move handling
2016-06-18 15:38:24 -07:00
Scott Lahteine
46d3ef2223
Simplify sample_set probe_pt call in M48
2016-06-18 15:38:23 -07:00
Scott Lahteine
a647b05f82
Shrink some debug code in G28
2016-06-18 15:38:23 -07:00
Scott Lahteine
4edf813bde
Just-in-time declaration style in M48
2016-06-18 15:38:23 -07:00
Juan Ricardo Gomez Anaya
c475291e19
Fix M851
...
Minor change missing in the process of standardize the gcode M851
2016-06-18 15:19:07 -07:00
Scott Lahteine
e35583888c
Merge pull request #4082 from esenapaj/Follow-up-the-PR-#4065
...
Follow-up the PR #4065 (Remove support for XY servo endstops)
2016-06-18 03:31:12 -07:00
Scott Lahteine
6dff52d920
Merge pull request #4078 from RicardoGA/Language_Spanish
...
Update Spanish Language
2016-06-18 03:28:46 -07:00
esenapaj
d55b94d606
Follow-up the PR #4065 (Remove support for XY servo endstops)
...
・Update a forgotten Configuration.h of Cartesio
2016-06-18 18:01:58 +09:00
Scott Lahteine
4e860babbc
Allow setting xy_travel_speed for delta leveling also
2016-06-18 01:40:49 -07:00
Scott Lahteine
d36d4edd80
Tweak partial homing code
2016-06-18 01:16:50 -07:00
Scott Lahteine
d3a05de96e
Save and restore feedrate in probe functions
2016-06-18 01:16:26 -07:00
Juan Ricardo Gomez Anaya
5991eb428f
Update Spanish Language
...
Spanish language update and also add missing messages
2016-06-18 00:27:04 -05:00
Scott Lahteine
f33bd0bb10
Merge pull request #4077 from thinkyhead/rc_delete_old_macros
...
Delete some obsolete Z servo macros
2016-06-17 18:59:16 -07:00
Scott Lahteine
defcacc1a9
Delete some obsolete Z servo macros
2016-06-17 18:49:17 -07:00
Scott Lahteine
bbf5b486c3
Add an SD Card stop function, use in ultralcd
2016-06-17 18:27:14 -07:00
Scott Lahteine
3a150f07c2
Merge pull request #4073 from thinkyhead/rc_temp_mystery
...
Minor tweaks to M109 / M190
2016-06-17 17:49:50 -07:00
Scott Lahteine
bd4ec727e7
Merge pull request #4066 from thinkyhead/rc_M851_with_probe
...
Make M851 standard with a bed probe
2016-06-17 17:32:55 -07:00
Scott Lahteine
692a6e7c91
Merge pull request #4065 from thinkyhead/rc_goodbye_xy_servos
...
Remove support for XY servo endstops
2016-06-17 17:32:08 -07:00
Scott Lahteine
de177ba6c9
Minor tweaks to M109 / M190
2016-06-17 17:26:21 -07:00
Scott Lahteine
eab44b30d4
Safety and serial sections
2016-06-17 15:19:43 -07:00
Scott Lahteine
fc56a547d1
Rename movement section to motion
2016-06-17 15:19:43 -07:00
Scott Lahteine
a8b8796cd7
Define probe offsets when a probe exists
2016-06-17 15:19:42 -07:00
Scott Lahteine
1000563d80
Make M851 standard with a bed probe
2016-06-17 15:19:42 -07:00
Scott Lahteine
f66a194159
Merge pull request #4062 from jbrazio/bugfix/compiler-warnings
...
Fixes misc gcc warnings
2016-06-17 14:23:28 -07:00
Scott Lahteine
1bed392c68
HAS_Z_ENDSTOP_SERVO => HAS_Z_SERVO_ENDSTOP
2016-06-17 14:20:17 -07:00
Scott Lahteine
47ce810f52
Remove support for XY servo endstops
2016-06-17 14:19:17 -07:00
João Brázio
d1e5dc6319
Fixes misc gcc warnings
2016-06-17 20:24:24 +01:00
esenapaj
c5eecb11b2
Follow-up the PR #4055 (Croatian language support)
...
・Update a forgotten Configuration.h of Cartesio
2016-06-17 21:20:15 +09:00
Scott Lahteine
d991a4c24a
Merge pull request #4063 from thinkyhead/rc_remove_swp_files
...
Delete mysterious .swp files from #3609
2016-06-16 17:22:48 -07:00
Scott Lahteine
8d8cbef1de
Merge pull request #4055 from thinkyhead/rc_croatian_language
...
Croatian language support
2016-06-16 17:22:25 -07:00
Scott Lahteine
ebbed2975e
Delete mysterious .swp files from #3609
2016-06-16 16:42:03 -07:00
Scott Lahteine
02e5dad29a
Include Croatian in language listings
2016-06-16 16:18:26 -07:00
Scott Lahteine
2015aad867
Tweak Croatian language file heading
2016-06-16 16:09:57 -07:00
Robert Marko
884bc63fbe
Add Croatian language
2016-06-16 16:09:57 -07:00
Scott Lahteine
ef3bef6b9e
Fix feedrate in gcode_T (max_feedrate is mm/s)
2016-06-16 16:03:14 -07:00
Scott Lahteine
4640974e1b
Merge pull request #4060 from esenapaj/Follow-up-the-PR-#4053
...
Follow-up and improvement the PR #4053 (CNControls Cartesio UI Support)
2016-06-16 15:44:00 -07:00
esenapaj
106227540e
Follow-up and improvement the PR #4053 (CNControls Cartesio UI Support)
...
・Add implimantation of PR #3609 to configuration files of Cartesio
・Standardize macro names
2016-06-16 19:22:31 +09:00
MagoKimbra
008d0637dd
Fix gcode_T
2016-06-16 09:05:36 +02:00
edwilliams16
114d9db7d0
Show babysteps on the LCD in mm, not steps
2016-06-15 23:03:24 -07:00
Scott Lahteine
b410bf933b
Merge pull request #4053 from thinkyhead/rc_cartesio_redo
...
CNControls Cartesio UI Support
2016-06-15 22:33:45 -07:00
Scott Lahteine
f639044c24
Merge pull request #3609 from jbrazio/feature/config-version
...
Adds versioning for Configuration.h & Configuration_adv.h
2016-06-15 22:09:47 -07:00
Scott Lahteine
4d2cb70152
Cartesio UI Support
2016-06-15 21:46:54 -07:00
Scott Lahteine
da90bbe0eb
Merge pull request #4010 from thinkyhead/rc_toolchange_adjust
...
Fixup position adjustment on toolchange
2016-06-15 21:10:33 -07:00
Scott Lahteine
948c467e16
Merge pull request #4043 from AnHardt/save_delay
...
Introduce save_delay()
2016-06-15 21:06:43 -07:00
Scott Lahteine
4b93989a77
MBL Z adjustment on toolchange
2016-06-15 20:49:36 -07:00
Scott Lahteine
9c800d1f8c
Position adjustment for bed leveling
2016-06-15 20:49:36 -07:00
Scott Lahteine
8c7babb70f
Merge pull request #4049 from esenapaj/Fix-for-the-PR-#4023
...
Fix for the PR #4023(Add macros to move servos)
2016-06-15 20:39:46 -07:00
AnHardt
1219310622
Introduce save_delay()
...
Introduce save_delay() for long delays what otherwise would cause
watchdog resets
Explizit lcd_set_custom_characters(false) at the end of bootscreen().
Else the charset is not proper set in case of LCD_PROGRESS_BAR.
2016-06-15 18:11:55 +02:00
esenapaj
44f091a413
Fix for the PR #4023(Add macros to move servos)
...
・Add missing ')'
2016-06-15 22:34:55 +09:00
Alexander Leisentritt
c2b7ef1e7e
"e" was renamed to "eindex" in a previous commit
2016-06-15 11:11:16 +02:00
Scott Lahteine
52ac2a62ee
Merge pull request #4013 from thinkyhead/rc_toolchange_no_move
...
Use "Tn S1" to change tools without moving
2016-06-14 20:13:01 -07:00
Scott Lahteine
d2a00b74e3
Merge pull request #4004 from thinkyhead/rc_feedrate_in_gcode_T
...
Use linear feedrate in gcode_T, not volumetric
2016-06-14 20:10:08 -07:00
Scott Lahteine
0ad26d0de8
Merge pull request #4034 from AnHardt/custom-splash-screen
...
Custom Splash Screen
2016-06-14 18:51:39 -07:00
esenapaj
741cda0e47
Follow-up the PR #3676(Advance extrusion algorithm – LIN_ADVANCE)
...
・Update forgotten example configurations
2016-06-15 00:10:15 +09:00
AnHardt
02b3d6b8d3
Custom Splash Screen
...
Custom Splash Screen for full graphic displays.
Too complicated for the hitachis without knowing what exactly to display.
On top of #4032
Realisation of an idea from #3996
2016-06-14 09:39:28 +02:00
Scott Lahteine
78a48d7e3c
Merge pull request #4038 from thinkyhead/rc_fix_heater_off
...
Fix broken DISABLE_HEATER macro
2016-06-13 20:58:34 -07:00
Scott Lahteine
ee5be92206
Fix broken DISABLE_HEATER macro
2016-06-13 20:57:58 -07:00
Scott Lahteine
8d8180e028
Parse M905 args in Marlin_main.cpp
2016-06-13 19:25:28 -07:00
Scott Lahteine
2b340f5acb
patch LIN_ADVANCE to use code_value_float
2016-06-13 18:54:25 -07:00
Scott Lahteine
b708196770
Merge pull request #4032 from AnHardt/bootscreen-delay
...
Show bootscreen later
2016-06-13 18:27:05 -07:00
Scott Lahteine
587de1b6b6
Merge pull request #3676 from thinkyhead/rc_lin_advance_feature
...
Advance extrusion algorithm – LIN_ADVANCE
2016-06-13 18:04:58 -07:00
AnHardt
b4fedec0d1
Show bootscreen later
...
Init display and show bootscreen later, but init display in `kill()`
to init outputs before the bootscreen delays but being able to display
kill errors.
2016-06-14 01:59:50 +02:00
Silvio Didonna
08e2c5a6ea
Added and translated some strings from language_en
2016-06-13 13:04:09 +02:00
Scott Lahteine
4d2119f83a
_lcd_move => _lcd_move_xyz
2016-06-12 17:14:19 -07:00
Scott Lahteine
811967923a
Fix manual_move to move the correct E stepper
2016-06-12 17:14:19 -07:00
Scott Lahteine
0d0b751498
Merge pull request #4023 from thinkyhead/rc_servo_macros
...
Add macros to move servos
2016-06-12 15:45:39 -07:00
Scott Lahteine
4fbe818163
Add macros to move servos
2016-06-12 15:38:30 -07:00
Scott Lahteine
b322ac4417
No need to check ULTIPANEL with DOGLCD
2016-06-11 16:50:06 -07:00
João Brázio
8ccd97e7cc
Updated all example configuration files
2016-06-12 00:36:15 +01:00
Scott Lahteine
c7eeb09e8f
Merge pull request #4012 from Blue-Marlin/watchdoghealing
...
Heal the watchdog
2016-06-11 16:18:22 -07:00
Scott Lahteine
7fb69e24fb
Use "Tn S1" to change tools without moving
2016-06-11 15:58:45 -07:00
Scott Lahteine
2f1bf8373b
Merge pull request #4005 from thinkyhead/rc_prepare_move_destination
...
Clarify names of prepare_move functions
2016-06-11 15:51:58 -07:00
João Brázio
de8108648f
Added a versioning system to the config files
2016-06-11 23:48:10 +01:00
Blue-Marlin
efe719f898
Heal the watchgog
2016-06-12 00:34:31 +02:00
Scott Lahteine
b75e648f2c
Clarify names of prepare_move functions
2016-06-11 15:32:49 -07:00
Scott Lahteine
ae9b09fe94
menu => screen
2016-06-11 14:53:39 -07:00
Scott Lahteine
45ea8749d3
Wrap all items depending on ULTIPANEL
2016-06-11 14:27:34 -07:00
Scott Lahteine
0e2bfd0769
Use linear feedrate in gcode_T, not volumetric
2016-06-10 18:27:01 -07:00
Scott Lahteine
bf8710d522
Merge pull request #4001 from Blue-Marlin/manage_manual_move-ULTIPANEL
...
manage_manual_move(); -> ULTIPANEL
2016-06-10 17:17:57 -07:00
João Brázio
2c34ec2bac
Closes #3999 : Compilation error with BEEPER_PIN -1
2016-06-11 00:12:49 +01:00
Blue-Marlin
378ff92e98
manage_manual_move(); -> ULTIPANEL
...
Makr the call of `manage_manual_move() ` depandent of `ULTIPANEL`
2016-06-10 23:36:57 +02:00
Scott Lahteine
aad9c0ed8d
Apply updated ISR timing code
2016-06-09 21:03:27 -07:00
Scott Lahteine
506d78b2f8
Run the advance_isr faster instead of doing multiple e-steps per interrupt
2016-06-09 21:03:27 -07:00
Scott Lahteine
6d62a4ffc8
Patch LIN_ADVANCE for style and forward-compatibility
2016-06-09 21:03:27 -07:00
Sebastianv650
fb8e880734
Add LIN_ADVANCE
2016-06-09 21:03:27 -07:00
Scott Lahteine
e2d4919c01
Merge pull request #3991 from thinkyhead/rc_axis_units
...
Rename some vars to clarify their relationship to acceleration
2016-06-09 20:57:01 -07:00
Scott Lahteine
74060f17b7
Merge pull request #3995 from thinkyhead/rc_nonblocking_buzzer
...
New feature: Non blocking tone queue
2016-06-09 20:55:29 -07:00
Scott Lahteine
a82c755a35
Fix BQ_LCD_SMART_CONTROLLER pin compiler warnings
2016-06-09 20:38:23 -07:00
João Brázio
5b5aa1572b
Non-blocking buzzer
2016-06-09 20:20:05 -07:00
Scott Lahteine
72c6f2923f
axis_steps_per_unit => axis_steps_per_mm
2016-06-09 17:04:51 -07:00
Scott Lahteine
446515ab79
Adjust spacing in block_t
2016-06-09 17:04:51 -07:00
Scott Lahteine
80ab749563
Rename acceleration locals for clarity
2016-06-09 17:04:51 -07:00
Scott Lahteine
3b08eb1eeb
acceleration_st => acceleration_steps_per_s2
2016-06-09 17:04:51 -07:00
Scott Lahteine
cb4704e07a
Rename some planner acceleration vars
...
- `per_sq_second` => `per_s2`
- `per_sqr_second` => `per_s2`
- `axis_steps_per_sqr_second` => `max_acceleration_steps_per_s2`
2016-06-09 17:04:50 -07:00
Scott Lahteine
3c68be79dc
Throw an error in PID_autotune for E < -1
2016-06-09 16:41:53 -07:00
Scott Lahteine
26f8f54c56
Merge pull request #3985 from thinkyhead/rc_inch_fahrenheit_kelvin
...
Support inches, fahrenheit, and kelvin
2016-06-08 20:10:33 -07:00
Scott Lahteine
f0a5b7f0bc
Merge pull request #3986 from thinkyhead/rc_mbl_forward_iteration
...
Use memset in mbl.reset to save 58 bytes
2016-06-08 17:33:41 -07:00
Scott Lahteine
0b3142b45b
Remove redundant declarations from M100 code
2016-06-08 17:09:34 -07:00
Scott Lahteine
4980ecc1f7
Smaller binary using inline gcode argument getters
2016-06-08 17:03:28 -07:00
Reid Rankin
16212432c9
G20/21 and M149 support, and code_value() refactor
...
This is an update of MarlinDev PR #196 .
G20/21: support for switching input units between millimeters and
inches.
M149: support for changing input temperature units.
In support of these changes, code_value() and code_value_short() are
replaced with an array of functions which handle converting to the
proper types and/or units.
2016-06-08 16:51:10 -07:00
Scott Lahteine
a569e89775
Merge pull request #3978 from thinkyhead/rc_planner_local_rename
...
Rename some auto/locals to avoid name conflict
2016-06-08 16:41:57 -07:00
Scott Lahteine
2d55862499
Use memset in mbl.reset to save 58 bytes
2016-06-08 16:05:18 -07:00
Scott Lahteine
b23f710034
Cleanup and naming for num-to-string functions
2016-06-08 13:12:27 -07:00
Scott Lahteine
3d56b9d127
Merge pull request #3979 from thinkyhead/mbl_cell
...
MBL: cel => cell
2016-06-07 19:12:46 -07:00
Scott Lahteine
cca047424d
MBL: cel => cell
2016-06-07 19:10:39 -07:00
Scott Lahteine
49ecaf774d
Rename some auto/locals to avoid name conflict
2016-06-07 15:38:45 -07:00
petrzjunior
9171a3d94f
Update Czech language 2016/06/07
2016-06-07 19:25:15 +02:00
Scott Lahteine
5e6fdbb4cb
Merge pull request #3963 from thinkyhead/rc_advance_steppers
...
Use e_steps[EXTRUDERS] instead of e_steps[4]
2016-06-05 02:46:06 -07:00
Scott Lahteine
47b5c55c29
Implement the delayed-move technique
2016-06-05 02:29:49 -07:00
Scott Lahteine
a3e25a0fca
Instead of trying to move now, set a flag to move asap
2016-06-05 02:29:48 -07:00
Scott Lahteine
e2a8961635
Use e_steps[EXTRUDERS] instead of e_steps[4]
2016-06-05 01:44:53 -07:00
Scott Lahteine
43947072d5
Merge pull request #3895 from thinkyhead/rc_singlenozzle_part_2
...
SINGLENOZZLE: EXTRUDERS versus HOTENDS
2016-06-04 15:23:17 -07:00
Scott Lahteine
d7e4e8e9be
Fix a typo in #3955
2016-06-04 02:09:58 -07:00
Scott Lahteine
c2362c1b3c
Apply Marlin coding standards to MBL class
2016-06-03 21:43:32 -07:00
Edward Patel
c06de0f097
MBL: Added keeping MBL active when homing single axises for #3750
2016-06-03 21:42:29 -07:00
Scott Lahteine
f2fb66c00d
With SINGLENOZZLE only set temperature for the active tool
2016-06-03 17:38:03 -07:00
Scott Lahteine
cd441ce652
SINGLENOZZLE: EXTRUDERS versus HOTENDS
2016-06-03 17:38:03 -07:00
Scott Lahteine
32f8300cc6
Merge pull request #3944 from thinkyhead/rc_eboston_lcd_contrast
...
Improved LCD contrast handling
2016-06-03 17:08:41 -07:00
Scott Lahteine
9c87bf835c
Merge pull request #3947 from thinkyhead/rc_statics_stepper
...
Apply static to remaining Stepper methods
2016-06-03 17:08:15 -07:00
Scott Lahteine
08871d4d6e
Merge pull request #3950 from boelle/patch-3
...
last of missing defines added
2016-06-03 17:07:02 -07:00
Scott Lahteine
4e13cd3f35
Merge pull request #3955 from MagoKimbra/RCBugFix
...
Fix M428 width DELTA & SCARA
2016-06-03 15:50:37 -07:00
Scott Lahteine
2403a1cf9c
Merge pull request #3952 from rafacouto/RCBugFix
...
Galician language update.
2016-06-03 15:46:03 -07:00
Scott Lahteine
8529122af1
Merge pull request #3946 from thinkyhead/rc_g28_servo_raise_before_stow
...
Raise the servo probe before stow outside ABL context
2016-06-03 15:45:36 -07:00
MagoKimbra
f499be084a
Fix M428 width DELTA & SCARA
2016-06-03 23:23:23 +02:00
Rafa Couto
5f8db3f574
Galician language update.
2016-06-03 18:24:53 +02:00
Bo Herrmannsen
8532bf4087
last of missing defines added
...
need to check line 101-103
2016-06-03 11:20:46 +02:00
Scott Lahteine
81384dfd36
Apply static to remaining stepper methods
2016-06-02 18:00:31 -07:00
Scott Lahteine
664b299a51
This fix is not DELTA compatible
2016-06-02 17:16:19 -07:00
Scott Lahteine
064efb20e0
Also call clear_command_queue for lcd_sdcard_stop
2016-06-02 17:16:19 -07:00
Scott Lahteine
6277395e1e
set_current_position_from_planner() after stepper.quick_stop()
2016-06-02 17:16:19 -07:00
Scott Lahteine
381bc6f0b0
set_position => set_position_mm
2016-06-02 17:16:19 -07:00
Scott Lahteine
663d2463dc
Merge pull request #3922 from thinkyhead/rc_statics_stepper
...
Apply static to Stepper class
2016-06-02 17:14:24 -07:00
Scott Lahteine
194185539d
Merge pull request #3925 from thinkyhead/rc_statics_planner
...
Apply static to Planner class
2016-06-02 17:14:04 -07:00
Scott Lahteine
3fd9b331f0
Merge pull request #3924 from thinkyhead/rc_statics_temperature
...
Apply static to Temperature class
2016-06-02 17:13:17 -07:00
Scott Lahteine
db0fd021d0
Z raise options independent of ABL so G28 can use them
2016-06-02 16:56:49 -07:00
Scott Lahteine
9eecb4404b
Make raise_z_after_probing null sometimes
2016-06-02 16:56:49 -07:00
Scott Lahteine
28fb1f8994
Tweak #endif comment for ABL GRID
2016-06-02 16:56:49 -07:00
Scott Lahteine
b3a37b493d
Patch G28 servo stow to use Conditionals, raise_z_after_probing
2016-06-02 16:56:49 -07:00
Scott Lahteine
5390c846a5
Positive conditions for HAS_LCD_CONTRAST
2016-06-02 16:17:34 -07:00
Scott Lahteine
efa7209acf
Improved LCD contrast handling
...
Based on MarlinFirmware/MarlinDev#200 from @eboston
2016-06-02 16:17:34 -07:00
Scott Lahteine
b703fa9538
Add sanity check for SAV_3DGLCD display types
2016-06-02 15:21:17 -07:00
lrpirlet
3aefa04386
Raise the servo probe before stow outside ABL context
2016-06-01 21:53:45 +02:00
Scott Lahteine
9729e9c450
Combine ST7565 / U8GLIB_NHD_C12864 items in dogm
2016-06-01 01:42:14 -07:00
Scott Lahteine
f331763eca
Merge pull request #3829 from thinkyhead/rc_fix_T_command
...
Fix bad movement in gcode_T when switching extruders
2016-05-31 19:36:18 -07:00
Scott Lahteine
67f816ff79
Merge pull request #3926 from thinkyhead/rc_statics_endstops
...
Drop FORCE_INLINE from endstops.h
2016-05-31 19:35:41 -07:00
Scott Lahteine
2bd4f33369
Merge pull request #3928 from thinkyhead/rc_allen_key_cleanup
...
Remove excess allen key probe examples from configs
2016-05-31 19:18:21 -07:00
Scott Lahteine
d698c89971
Fix bad movement in gcode_T when switching
2016-05-31 19:14:33 -07:00
Scott Lahteine
1a01a44a94
Merge pull request #3936 from thinkyhead/rc_sav_mk1
...
Support for SAV_3DGLCD OLED LCD controller
2016-05-31 18:46:25 -07:00
Scott Lahteine
4770d7c346
Merge pull request #3933 from boelle/patch-2
...
added defines present in en but not in da
2016-05-31 18:42:38 -07:00
Scott Lahteine
c6c01eaaac
Merge pull request #3888 from thinkyhead/rc_slower_max31855
...
Slower SPI speed for MAX31855
2016-05-31 18:40:38 -07:00
Scott Lahteine
a0b000d752
Support for SAV_3DGLCD OLED LCD controller
2016-05-31 14:41:16 -07:00
Scott Lahteine
bd97bbc52a
Make HAS_LCD_CONTRAST a boolean flag
2016-05-31 11:47:02 -07:00
Scott Lahteine
bc77670673
Merge pull request #3929 from thinkyhead/rc_fix_printrboard_dac
...
Need to call dac_init() in setup() for DAC_STEPPER_CURRENT
2016-05-31 10:29:37 -07:00
Bo Herrmannsen
a1a8240606
added defines present in en but not in da
2016-05-31 14:57:52 +02:00
Bo Herrmannsen
5eb7a79d93
initial changes to DA
2016-05-31 14:24:33 +02:00
Scott Lahteine
55ef04a566
Need to call dac_init() in setup() for DAC_STEPPER_CURRENT
...
As reported by https://github.com/MarlinFirmware/Marlin/pull/3182#issuecomment-222595488
2016-05-30 23:35:06 -07:00
Scott Lahteine
43a71ef226
Remove excess allen key probe examples from configs
2016-05-30 18:26:53 -07:00
Scott Lahteine
1582ed43bf
Merge pull request #3918 from epatel/marlin/mbl_negative_xy_adv
...
MBL: Move border macros to Configuration_adv.h
2016-05-30 18:15:50 -07:00
Scott Lahteine
ff53819856
Drop FORCE_INLINE in planner.h
...
This change actually does increase the binary size by about 12 bytes,
but how does it affect performance?
2016-05-30 17:18:28 -07:00
Scott Lahteine
e60224a943
Drop FORCE_INLINE from endstops.h
...
`FORCE_INLINE` seems to have no effect with standard optimization.
2016-05-30 17:08:56 -07:00
Scott Lahteine
85512e9372
Drop FORCE_INLINE from temperature.h
...
`FORCE_INLINE` seems to have no effect on code generation with standard
optimization.
2016-05-30 17:06:50 -07:00
Scott Lahteine
78fb02a5ad
Apply static to Temperature class
2016-05-30 16:50:51 -07:00
Scott Lahteine
c3df293fc6
Merge pull request #3923 from thinkyhead/rc_statics_endstops
...
Apply static to Endstops class
2016-05-30 16:48:23 -07:00
Scott Lahteine
02735fd500
Merge pull request #3921 from thinkyhead/rc_calc_timer_tweak
...
Tiny calc_timer speedup
2016-05-30 16:47:03 -07:00
Scott Lahteine
668d50f68e
Keep Stepper encapsulation, use static data and methods
2016-05-30 16:24:04 -07:00
Scott Lahteine
26f866b908
Apply static to Endstops class
2016-05-30 16:23:43 -07:00
Scott Lahteine
470d5ac09f
Apply static to Planner class
2016-05-30 16:22:41 -07:00
Scott Lahteine
ecfdcf7250
Tiny calc_timer speedup
2016-05-30 16:17:02 -07:00
Edward Patel
06593833ff
MBL: Move border macros to Configuration_adv.h
2016-05-30 20:50:16 +02:00
Scott Lahteine
ffe55c230d
Merge pull request #3914 from thinkyhead/rc_fix_lcd_contrast
...
Patch conditionals for DEFAULT_LCD_CONTRAST, MINIPANEL
2016-05-30 11:20:14 -07:00
Scott Lahteine
d3efc96289
Patch conditionals for DEFAULT_LCD_CONTRAST, MINIPANEL
...
- `DEFAULT_LCD_CONTRAST` was incorrectly overriding all `DOGLCD`
- `MINIPANEL` conditionals are identical to `MAKRPANEL`
2016-05-30 01:10:47 -07:00
Edward Patel
92a27c37b3
MBL: Apply https://github.com/MarlinFirmware/Marlin/pull/3903 to example_configurations
2016-05-30 09:50:11 +02:00
Scott Lahteine
3861f1e0da
Merge pull request #3908 from jbrazio/bugfix/3826
...
Closes #3826 : SD printing will now pause and stop the print counter
2016-05-30 00:08:57 -07:00
Scott Lahteine
8806c7bbcc
Merge pull request #3903 from epatel/marlin/mbl_negative_xy
...
MBL: Fix for negative x/y positions
2016-05-29 22:07:35 -07:00
Scott Lahteine
dc22097b3a
Fix some of array initializations
...
- In `stepper.h` init `count_direction` array
- In `ultralcd.cpp` init `autotune_temp` array
2016-05-29 20:55:13 -07:00
João Brázio
40e64b36de
Closes #3826 : SD printing will now pause and stop the print counter
...
The LCD menu items for SD printing pause/stop have been updated to control
also the print job timer. This commit also fixes a small output bug with
M78, the failed print counter was displaying the wrong value.
2016-05-30 00:56:39 +01:00
Edward Patel
eb2746a34f
MBL: Fix for negative x/y positions
2016-05-28 21:05:43 +02:00
Scott Lahteine
fe3122774a
Merge pull request #3806 from thinkyhead/rc_coreyz_support
...
Support for COREYZ. Fixes for COREXY, COREXZ
2016-05-26 18:50:43 -07:00
Scott Lahteine
fad7680605
Slower SPI speed for MAX31855
2016-05-25 18:15:36 -07:00
Scott Lahteine
30f6b84561
Merge pull request #3812 from thinkyhead/rc_mbl_index_finders
...
Two index finding functions for MBL
2016-05-23 15:54:37 -07:00
Scott Lahteine
89e630b2fb
Merge pull request #3808 from thinkyhead/rc_singlenozzle
...
SINGLENOZZLE
2016-05-23 15:52:19 -07:00
Scott Lahteine
827738a790
set_z parameters marked const
2016-05-23 14:25:43 -07:00
Scott Lahteine
9049f4084b
EEPROM report uses G29 S3
2016-05-23 14:25:43 -07:00
Scott Lahteine
4955163959
Propose simpler probe index methods
2016-05-23 14:25:43 -07:00
Scott Lahteine
a1a5cb5393
Propose simpler cel index methods
2016-05-23 14:25:42 -07:00
Scott Lahteine
360adc6a3b
Small reduction in M421 code
2016-05-23 14:25:42 -07:00
Scott Lahteine
a4ed988c60
Two index finding functions for MBL
2016-05-23 14:25:42 -07:00
Scott Lahteine
0e55c06f7d
Rename CORE_AXIS_3 to NORMAL_AXIS
2016-05-23 13:58:40 -07:00
Scott Lahteine
5172d4ba40
COREYZ stepper, planner, endstop, babysteps
2016-05-23 13:58:40 -07:00
Scott Lahteine
6c7f4909b1
COREYZ Conditionals, SanityCheck for only a single kinematic
2016-05-23 13:58:40 -07:00
Scott Lahteine
95fee8ca81
Add option for CoreYZ kinematics
2016-05-23 13:58:40 -07:00
Scott Lahteine
678cbad76a
Merge pull request #3819 from jbrazio/bugfix/followup-3813
...
Followup for #3813
2016-05-23 13:56:11 -07:00
AnHardt
bb66ffb2ae
Correct hardware endstops default
...
All credits to RicardoGA
2016-05-23 10:54:22 +02:00
João Brázio
75221fa673
Followup for #3813
2016-05-22 13:14:58 +01:00
Scott Lahteine
f9b4b90058
Merge pull request #3813 from jbrazio/bugfix/3809
...
Stopwatch and PrintCounter improvements
2016-05-21 18:33:57 -07:00
João Brázio
8c0edb2de4
Fixes #3809 and adds several improvements to the Stopwatch and
...
PrintCounter classes
2016-05-22 01:59:59 +01:00
Scott Lahteine
c5130fd23b
Additional instructions for controller reverse options
2016-05-20 18:14:50 -07:00
Scott Lahteine
cadf441059
Merge pull request #3798 from AnHardt/extend-M421
...
Extend M421 with I and J parameters
2016-05-20 16:17:23 -07:00
Scott Lahteine
0c7c45063b
PID_ADD_EXTRUSION_RATE based on MarlinKimbra
2016-05-20 16:15:05 -07:00
Scott Lahteine
92ac133f2b
Conditionals and Sanity Check for SINGLENOZZLE
2016-05-20 15:48:27 -07:00
Scott Lahteine
69abfef82e
Add "SINGLENOZZLE" extruder option
2016-05-20 15:45:11 -07:00
AnHardt
f5a036510f
Extend M421 with I and J parameters
...
Extend M421 with I and J parameters
2016-05-21 00:18:09 +02:00
Scott Lahteine
2f6e7b7b9b
Merge pull request #3805 from MatixYo/patch-7
...
Update language_pl.h to the latest strings
2016-05-20 14:50:49 -07:00
Scott Lahteine
1a6c72cb57
Apply to the rest of the configs
2016-05-20 11:52:27 -07:00
Scott Lahteine
37c6d0f4ed
Reword MESH_G28_REST_ORIGIN comment
2016-05-20 11:52:27 -07:00
Edward Patel
c7d90dc5ec
Add option to configure G28 all axis resting position for MBL
2016-05-20 11:52:27 -07:00
Mateusz Juszczyk
bbe4c20ef6
Update language_pl.h
2016-05-20 13:24:34 +02:00
Scott Lahteine
319d184999
Merge pull request #3803 from jbrazio/feature/buildroot-cleanup
...
Buildroot cleanup
2016-05-19 21:34:11 -07:00
Scott Lahteine
a469341555
Merge pull request #3800 from jbrazio/feature/move-felix-cfg
...
Moves Felix's dual configuration to a folder
2016-05-19 18:53:39 -07:00
João Brázio
14652bb141
Moves shared helper scripts to the buildroot
2016-05-20 02:25:13 +01:00
João Brázio
80f05920c5
Moves Felix's dual configuration to a folder
2016-05-20 00:49:16 +01:00
Scott Lahteine
8218558953
Update comments, rename next_ping_ms, followup to #3797
2016-05-19 16:44:57 -07:00
Scott Lahteine
6d68b12e28
Merge pull request #3797 from AnHardt/fix-screen-updatedelay
...
Rework intermediate idle() and manage_heater() calls in G2/G3 and G5
2016-05-19 16:29:27 -07:00
AnHardt
e761bdbb4b
Remove SF_ARC_FIX from G5 (Cubic B-spline)
...
Remove SF_ARC_FIX from G5 (Cubic B-spline).
SF_ARC_FIX is a fix for G2/G3 (arcs) where Skeinforge always produced relative instead of absolute coordinates for the endpoint of an arc.
It's very unlikely this is also a problem with Cubic B-splines. More likely is copying from the G2/G3 code.
2016-05-19 21:00:12 +02:00
AnHardt
2207001333
No compromises for the manage_heater()
...
No compromises for the manage_heater(). manage_heater() will return immediately when there is nothing to do, but needs a constant detaT to work proper.
Calling idle() only every 200ms results in a display update every ~2 seconds - that should be enough.
For the other functionalities in idle() and manage_inactivity() 200ms is a lot but hopefully works.
2016-05-19 20:52:11 +02:00
AnHardt
0c4d885d5b
Speedup sreen update delay
...
Speedup sreen update delay
and correct a comment.
A module division by 10 is slooooow. (powers of 2 are fast - but then you can AND a bitmask with the same result)
2016-05-19 15:41:09 +02:00
Rafa Couto
9d416289cc
Update Galician language to 1.1.0-RCBugFix.
2016-05-19 19:33:40 +09:00
Scott Lahteine
07c9a11c3c
Automatically set X2 stepper pins
2016-05-18 19:09:09 -07:00
Scott Lahteine
8aa591ca09
Merge pull request #3789 from jbrazio/feature/m999-s-arg
...
Implements S1 argument in M999
2016-05-18 16:58:09 -07:00
Scott Lahteine
138c5c8378
Merge pull request #3788 from thinkyhead/rc_dual_x_compile_fix
...
DUAL_X_CARRIAGE fixes, improvements, Travis test
2016-05-18 16:56:54 -07:00
João Brázio
e6effb8f35
Implements S1 argument in M999
2016-05-19 00:13:33 +01:00
Scott Lahteine
2a7b1a85f7
Improve DUAL_X_CARRIAGE sanity check errors
2016-05-18 15:59:28 -07:00
Scott Lahteine
516e79bbda
Declare extruder_duplication_enabled in Marlin.h
2016-05-18 15:51:44 -07:00
esenapaj
56d5ae596c
Update Japanese trasration
...
・Add new translation
・Change translation
2016-05-18 20:42:50 +09:00
Scott Lahteine
4041508ffb
Function decl. in headers don't need "extern"
2016-05-17 18:35:01 -07:00
Scott Lahteine
82c2d308dc
Merge pull request #3783 from thinkyhead/rc_bezier_delta_fix
...
Bezier style and DELTA patch
2016-05-17 18:27:48 -07:00
Scott Lahteine
ecec5c5e58
Bezier style and DELTA patch
2016-05-17 18:06:10 -07:00
Scott Lahteine
d66e53c42b
Merge pull request #3782 from thinkyhead/rc_home_z_before_g29
...
Require homing of Z before G29
2016-05-17 17:53:56 -07:00
Scott Lahteine
552516ddf5
Merge pull request #3781 from AnHardt/minor-delta-segmenting-speedup
...
Minor DELTA segmentation speedup
2016-05-17 17:17:38 -07:00
Scott Lahteine
a28970784c
XYZ unhomed
2016-05-17 17:02:53 -07:00
Scott Lahteine
a9926b71a4
Require homing of Z before G29
2016-05-17 16:57:12 -07:00
AnHardt
41e9569dbc
Minor DELTA segmentation speedup
...
Minor DELTA segmentation speedup by pulling calculations out of the loop.
2016-05-18 01:49:30 +02:00
Scott Lahteine
3016dfe484
Merge pull request #3744 from thinkyhead/rc_bezier_curves
...
Add BEZIER_CURVE_SUPPORT — G5 command
2016-05-17 13:57:38 -07:00
Scott Lahteine
d0ac4541d3
Merge pull request #3775 from jbrazio/bugfix/followup-3770
...
G29: Report final position back to host when using MBL
2016-05-17 13:55:26 -07:00
João Brázio
b6a3aef297
G29: Report final position back to host when using MBL
2016-05-17 01:27:59 +01:00
esenapaj
95f30529a6
Add stowing process for MECHANICAL_PROBE
2016-05-16 18:12:10 +09:00
esenapaj
e2b87f6c85
Separate Z_PROBE_ALLEN_KEY from MECHANICAL_PROBE
2016-05-16 18:12:10 +09:00
Scott Lahteine
58339aea5f
Merge pull request #3769 from jbrazio/bugfix/iteration-invokes-undef-behavior
...
Bugfix: iteration invokes undefined behavior
2016-05-15 20:36:25 -07:00
Scott Lahteine
26b4cb5b42
Merge pull request #3771 from thinkyhead/rc_auto_fans_again
...
Fix checkExtruderAutoFans
2016-05-15 20:32:31 -07:00
Scott Lahteine
c9271e610b
Merge pull request #3762 from jbrazio/bugfix/lcd-hide-bed-icon
...
Remove the hotbed icon from the status screen
2016-05-15 19:11:05 -07:00
Scott Lahteine
2f14934c65
Fix checkExtruderAutoFans
...
Make sure to only set the fan state once when extruders share a fan
2016-05-15 18:54:37 -07:00
João Brázio
ecd490ed49
Bugfix: iteration invokes undefined behavior
2016-05-15 22:45:08 +01:00
Scott Lahteine
abdfd914f8
Merge pull request #3763 from esenapaj/patch-4
...
Follow-up for #3720 and #3759
2016-05-15 12:37:51 -07:00
Scott Lahteine
754b0152f5
Fix MBL zigzag calls
2016-05-15 12:35:01 -07:00
esenapaj
6d722716f7
Follow-up the PR #3720 and #3759
...
Update forgotten Configuration_DUAL.h
2016-05-15 14:08:45 +09:00
João Brázio
451000387d
Remove the hotbed icon when HAS_TEMP_BED is false
2016-05-15 03:00:05 +01:00
Scott Lahteine
a058226799
Prevent watchdog timeout in bezier moves
2016-05-14 17:41:16 -07:00
Scott Lahteine
13175ce7da
Fix error checking in M421
2016-05-14 17:12:44 -07:00
Scott Lahteine
bc5a547d55
More robust MBL index / point conversion
2016-05-14 16:45:56 -07:00
Scott Lahteine
a3520b6f01
More precision in M503 output for MBL's M421
2016-05-14 16:19:37 -07:00
Scott Lahteine
1b90682617
Merge pull request #3702 from thinkyhead/rc_sensitive_fan_pins
...
Remove need to define unused pins as -1 in pins files
2016-05-14 15:49:22 -07:00
Scott Lahteine
c8a40f06a6
Merge pull request #3759 from thinkyhead/rc_more_printcounter
...
Printcounter bugfix and some new features
2016-05-14 15:36:31 -07:00
Scott Lahteine
585c8a918f
Merge pull request #3758 from thinkyhead/rc_verbiage
...
Tweaks to some verbiage
2016-05-14 15:27:11 -07:00
João Brázio
f9a62f6a8e
Added PRINTJOB_TIMER_AUTOSTART section to example config files
2016-05-14 15:22:45 -07:00
João Brázio
8a18c52002
Adds an option to disable print job timer auto start
2016-05-14 15:22:44 -07:00
João Brázio
a79267217b
M78 now allows stats reset using the S78 argument
2016-05-14 15:22:44 -07:00
João Brázio
b660f1bdb8
Bugfix: Multiple M77 no longer increment the print counter
2016-05-14 15:22:43 -07:00
Scott Lahteine
c63f95f2fe
Merge pull request #3748 from clexpert/patch-1
...
Lastest changes in Czech translate
2016-05-14 15:12:39 -07:00
Scott Lahteine
e01e52969e
Merge pull request #3757 from thinkyhead/rc_fix_auto_fans
...
Don't try to enable unused auto fans
2016-05-14 15:09:24 -07:00
Scott Lahteine
ddf3e1e22d
Tweaks to some verbiage
2016-05-14 15:06:09 -07:00
Scott Lahteine
a713043acd
Merge pull request #3749 from esenapaj/patch-3
...
Enclose all #error strings by double-quotes
2016-05-14 15:01:56 -07:00
Scott Lahteine
3cfea3ff12
Merge pull request #3752 from AnHardt/fix-FIX_MOUNTED_PROBE
...
G29 missing FIX_MOUNTED_PROBE condition
2016-05-14 15:00:42 -07:00
Scott Lahteine
08dfe08f9a
Merge pull request #3754 from jbrazio/feature/update-pt_PT
...
Updated pt_PT language pack
2016-05-14 15:00:12 -07:00
Scott Lahteine
596ebccd54
Merge pull request #3753 from jbrazio/feature/followup-3740
...
Warn user about useless of individual axis homing and DELTA kinematics
2016-05-14 14:59:49 -07:00
Scott Lahteine
6e3556cb75
Merge pull request #3746 from esenapaj/patch-2
...
Update Japanese translation
2016-05-14 14:57:43 -07:00
Scott Lahteine
ddac17a195
Add BEZIER_CURVE_SUPPORT (G5 XYZEFIJPQ)
2016-05-14 14:52:08 -07:00
Scott Lahteine
b4c891dfd2
Remove obsolete reference to prepare_arc_move
2016-05-14 14:51:09 -07:00
Scott Lahteine
9f6b8f7d5b
Remove extra @section directive from configs
2016-05-14 14:51:09 -07:00
Scott Lahteine
4d6bb52b26
Don't try to enable unused auto fans
...
Addressing #3743
2016-05-14 14:46:14 -07:00
Scott Lahteine
f13c4a9ec4
Merge pull request #3720 from jbrazio/feature/host-keepalive
...
Removes the DISABLE from HOST_KEEPALIVE
2016-05-14 14:39:31 -07:00
João Brázio
596f15348d
Updated pt_PT language pack
2016-05-14 01:45:15 +01:00
João Brázio
d7522152e1
Warn user about useless of individual axis homing and DELTA kinematics
2016-05-14 01:35:05 +01:00
AnHardt
8a4376d51f
Idle during long arcs
...
Idle during long arcs
to prevent from watchdog resets during high segmented fast arcs.
2016-05-14 00:29:13 +02:00
esenapaj
888443ca1e
Enclose all #error strings with apostrophes
2016-05-13 21:10:23 +09:00
Petr Zahradnik
50b1a6bb2b
Lastest changes in Czech translate
2016-05-13 13:51:13 +02:00
AnHardt
b74af78736
Make arc support (G2/G3) configurable
...
Saves about 2669 bytes when deactivated. (About 1% for a AT2560, about __4%__ for a AT644!)
2016-05-13 13:27:45 +02:00
AnHardt
aef2559bd8
fix-FIX_MOUNTED_PROBE
...
Add a forgotten condition
2016-05-13 12:07:17 +02:00
esenapaj
e9d851137d
Update Japanese translation
...
・Add new translation
2016-05-13 18:52:35 +09:00
Scott Lahteine
14cd0f4c92
Merge pull request #3740 from thinkyhead/rc_lcd_home_options
...
Individual Axis Homing LCD menu items
2016-05-12 11:59:46 -07:00
esenapaj
69511b5e5e
Follow-up the PR #3719(Harmonize LCD comment section)
...
It update forgotten Configuration_DUAL.h.
2016-05-12 19:16:36 +09:00
Scott Lahteine
675e92ab1f
Merge pull request #3738 from thinkyhead/rc_limit_i2c_request
...
Print an error on bad i2c request
2016-05-11 19:36:49 -07:00
João Brázio
09150cae79
Individual Axis Homing LCD menu items
2016-05-11 19:28:19 -07:00
Scott Lahteine
4dc4e2063f
Add REVERSE_ENCODER_DIRECTION option
2016-05-11 15:39:28 -07:00
Scott Lahteine
aaeadf0cbd
If no "B" parameter given, get 1 byte
2016-05-11 15:30:08 -07:00
Scott Lahteine
a6d594665b
Print an error on bad i2c request
...
Reference: https://github.com/MarlinFirmware/Marlin/pull/3713#issuecomment-218333678
2016-05-11 15:30:02 -07:00
João Brázio
85b2c80838
Updated example configurations
2016-05-11 01:45:49 +01:00
João Brázio
ac7f634956
Removed the DISABLE from HOST_KEEPALIVE_FEATURE option
2016-05-11 01:45:49 +01:00
Scott Lahteine
a454a88f9c
Merge pull request #3722 from jbrazio/bugfix/printcounter
...
Minor #warning fix for PrintCounter
2016-05-10 17:17:04 -07:00
Scott Lahteine
03bda5c141
Merge pull request #3719 from jbrazio/feature/update-configs
...
Harmonize LCD comment section
2016-05-10 17:16:23 -07:00
Scott Lahteine
c827671299
Mention Z_PROBE_ALLEN_KEY in probe sanity checks
2016-05-10 13:50:20 -07:00
Scott Lahteine
be5d17de17
Merge pull request #3713 from thinkyhead/rc_file_offset_long
...
Use code_value_long for potentially large values
2016-05-10 09:15:53 -07:00
Scott Lahteine
56dd31ea3c
Use code_value_long for potentially large values
...
Addressing #3711
2016-05-10 09:15:31 -07:00
João Brázio
eafa16a781
Minor #warning fix for PrintCounter
2016-05-10 14:14:54 +01:00
João Brázio
5373ac6373
Updated example configurations
2016-05-10 13:42:00 +01:00
João Brázio
aa5a4716cf
Update default config
2016-05-10 13:37:21 +01:00
esenapaj
1a75509a3c
Cleanup for Danish file
...
・Arrange the strings in unified order
・Remove "#ifdef DELTA_CALIBRATION_MENU" directive
・Adjust spacing
2016-05-10 02:43:25 +09:00
esenapaj
cf6c607425
Update Japanese translation
...
・Add new translation
・Add translation for 16 width ASCII LCD
・Change translation
・Revert translation from Japanese to English
・Fix typo
2016-05-10 02:43:24 +09:00
Scott Lahteine
6f36b7c1cd
Merge pull request #3224 from yarda/fix-melzi2-arduino-1.6.x
...
Fixed Makefile to work with Melzi2 boards on arduino-1.6.x
2016-05-08 19:33:37 -07:00
Scott Lahteine
050e0bd2af
Merge pull request #3705 from thinkyhead/rc_runaway_logic
...
Fallthru in thermal runaway test when TRState changes
2016-05-08 19:00:24 -07:00
Scott Lahteine
5f7ad16b19
Merge pull request #3707 from thinkyhead/rc_fix_delta_blocking_move
...
Fix dipping on DELTA robots during G29
2016-05-08 18:42:57 -07:00
Scott Lahteine
96b71e62c0
Fix dipping on DELTA robots during G29
...
- Addressing #3689 , et. al.
2016-05-08 18:28:46 -07:00
Scott Lahteine
ea1dd31851
Enclose #error strings with apostrophes in quotes
2016-05-08 18:08:39 -07:00
Scott Lahteine
9b92bb8f31
Set the initial state based on target temperature
2016-05-08 17:25:44 -07:00
Scott Lahteine
6b13c430ae
The TRReset state is not needed with fall-through
2016-05-08 17:01:46 -07:00
Scott Lahteine
c2522ce1f5
Fallthru in thermal runaway test when TRState changes
2016-05-08 16:51:33 -07:00
Scott Lahteine
d32d9a3c5c
Merge pull request #3672 from thinkyhead/rc_consolidate_probe_flags
...
Cleanup and consolidate probe conditionals for clarity
2016-05-08 16:42:22 -07:00
Scott Lahteine
15fc93d742
Cleanup and consolidate probe conditionals for clarity
2016-05-08 12:59:43 -07:00
Scott Lahteine
5ca6334fd2
Cleanup pins files, fixup analogtodigitalpin, etc.
2016-05-08 12:38:00 -07:00
esenapaj
9186be7b83
Fix compilation error in debugging code
...
Fix compilation error in Thermal Runaway debugging code
2016-05-09 01:57:21 +09:00
Scott Lahteine
51109d4af7
Use AxisEnum with _lcd_babystep()
2016-05-05 21:04:30 -07:00
Scott Lahteine
b65ea98d6b
Localize babystepping in the Temperature class
...
So that `ultralcd.cpp` doesn’t need to worry about the details.
2016-05-05 15:00:31 -07:00
Scott Lahteine
0c7beb832c
Merge pull request #3681 from esenapaj/patch-1
...
Follow-up the PR #3643(Temperature singleton)
2016-05-05 12:47:06 -07:00
Scott Lahteine
fc5fe2cc22
Merge pull request #3678 from jbrazio/rework/delta-diagonal-rod-timmers
...
Moved DELTA radius/rod default trimmer values to Conditionals.h
2016-05-05 11:38:14 -07:00
esenapaj
1a97442d19
Follow-up the PR #3643(Temperature singleton)
...
Follow-up the PR #3643(Temperature singleton)
・Change from fanSpeedSoftPwm[0] to thermalManager.fanSpeedSoftPwm[0] in planner.cpp
It fix compilation error when FAN_SOFT_PWM is enabled.
・Remove declaration of setExtruderAutoFanState() in temperature.h
Because that function was abolished.
・Change from babystepsTodo to thermalManager.babystepsTodo in ultralcd.cpp
It fix compilation errors when BABYSTEPPING is enabled.
2016-05-05 18:01:39 +09:00
Scott Lahteine
4f6120f70f
Merge pull request #3643 from thinkyhead/rc_singletons_plus_temperature
...
Temperature singleton
2016-05-04 20:41:46 -07:00
Scott Lahteine
084f6b5b44
Temperature singleton class
2016-05-04 19:42:12 -07:00
Scott Lahteine
142bd3f3e7
Disable THERMAL_PROTECTION_BED with no sensor
2016-05-04 19:36:51 -07:00
Scott Lahteine
13f85a2b50
Can't use the ENABLED macro as a boolean
2016-05-04 16:33:57 -07:00
João Brázio
23567a1d8b
Moved DELTA radius/rod default trimmer values to Conditionals.h
2016-05-05 00:18:32 +01:00
Scott Lahteine
b4b5c7a6b7
Merge pull request #3670 from thinkyhead/rc_scoovo_controller
...
Use directional buttons when defined
2016-05-03 17:42:18 -07:00
Scott Lahteine
6398d497b3
Ultimate followup to Stepper/Planner patch
...
- Search all symbols and apply prefixes where needed
- Encapsulate some private methods
- Inline some setters
- Make `microstep_mode` a public method
2016-05-03 17:07:37 -07:00
Scott Lahteine
ddafb859e2
Use directional buttons when defined
2016-05-03 12:50:49 -07:00
Scott Lahteine
b959020532
Merge pull request #3667 from esenapaj/patch-1
...
Additional follow-up the PR #3631(Encapsulate S...
2016-05-03 09:36:09 -07:00
esenapaj
212b17d510
Fix for PR #3526(Configuration.h LCD & SDCard s...
...
Fix for PR #3526(Configuration.h LCD & SDCard section rewrite)
It removes duplicated BQ_LCD_SMART_CONTROLLER.
2016-05-03 21:35:02 +09:00
esenapaj
605808fe37
Additional follow-up the PR #3631(Encapsulate S...
...
Additional follow-up the PR #3631(Encapsulate Stepper, Planner, Endstops in singleton classes)
・Change from abort_on_endstop_hit to stepper.abort_on_endstop_hit in endstop.cpp, Marlin_main.cpp, and ultralcd.cpp
・Add include path to cardreader.h and temperature.h in endstop.cpp(for CardReader class and disable_all_heaters())
It fix compilation error when ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED and SDSUPPORT are enabled.
・Change from digipot_current() to stepper.digipot_current() in Marlin_main.cpp
・Change from digitalPotWrite() to stepper.digitalPotWrite() in Marlin_main.cpp
It fix compilation errors when HAS_DIGIPOTSS is enabled.
・Change from microstep_mode() to stepper.microstep_mode() in Marlin_main.cpp
・Change attribute of microstep_mode() from private to public in stepper.h
・Change from microstep_readings() to stepper.microstep_readings() in Marlin_main.cpp
・Change from microstep_ms() to stepper.microstep_ms() in Marlin_main.
It fix compilation errors when HAS_MICROSTEPS is enabled.
2016-05-03 18:28:37 +09:00
Scott Lahteine
7fd0243048
Cleanup, debug strings in Planner::adjusted_position
2016-05-02 20:11:27 -07:00
Scott Lahteine
85e732d5fd
Fix BABYSTEPPING, add it to Travis test
2016-05-02 20:01:00 -07:00
Scott Lahteine
37c4970d87
Merge pull request #3660 from esenapaj/patch-2
...
Follow-up the PR #3631(Encapsulate Stepper, ...
2016-05-02 15:23:38 -07:00
Scott Lahteine
ad27d3c523
Merge pull request #3659 from esenapaj/patch-1
...
Some clean-up for example configuration files
2016-05-02 15:22:29 -07:00
Scott Lahteine
f1c1a8dc59
Merge pull request #3661 from Blue-Marlin/83filen2
...
8.3-filenames second try
2016-05-02 14:47:26 -07:00
Jochen Groppe
0bae00c1ed
Merge pull request #3644 from tkurbad/german_translation
...
Revisited German translation
2016-05-02 16:46:19 +02:00
Blue-Marlin
5ad7d263e9
8.3-filenames second try
...
Fix for #6 3593, #3648
this time excludung 'DEL' instead of accidently '~'.
2016-05-02 15:58:04 +02:00
Torsten Kurbad
aae2f502e0
Revisited German translation
2016-05-02 15:18:12 +02:00
esenapaj
a82cfcff2d
Follow-up the PR #3631(Encapsulate Stepper, ...
...
Follow-up the PR #3631(Encapsulate Stepper, Planner, Endstops in singleton classes)
plan_bed_level_matrix -> planner.bed_level_matrix in multi extruders section of Marlin_main.cpp
It probably fix the Issue #3658(plan_bed_level_matrix not declarate).
movesplanned() -> planner.movesplanned() in ADVANCED_OK section of Marlin_main.cpp
It fix compilation error when ADVANCED_OK is enabled
2016-05-02 22:04:26 +09:00
esenapaj
2fa4bc344c
Some clean-up for example configuration files
...
Some clean-up for example configuration files
Follow-up and fix the PR #3253(Make the Autotune item(s) in the LCD menu optional):
・Update forgotten file(Felix/Configuration_DUAL.h)
Follow-up the PR #3526(Configuration.h LCD & SDCard section rewrite):
・Add section of RigidBot Panel to RepRapWorld/Megatronics/Configuration.h
Follow-up the PR #3576(Z Safe Homing for all):
・Adjust spacing
Follow-up and fix the PR #3625(Print job statistics):
・Update forgotten file(Felix/Configuration_DUAL.h)
・Remove ambiguous character "f" in top of RigidBot/Configuration.h
2016-05-02 21:16:00 +09:00
Scott Lahteine
da47b83b3d
Revert PR 3648 to fix SD printing
...
The character 0x7E is common in 8.3 filenames. Maybe the last condition
should be removed completely instead.
2016-05-01 18:04:04 -07:00
Scott Lahteine
60c6efb75c
Merge pull request #3653 from thinkyhead/rc_bed_temp_watch_merge
...
Introduce temp watch protection for the bed
2016-05-01 13:58:28 -07:00
Scott Lahteine
5b7a6c217a
Include more fans in sensitive pins list
2016-05-01 13:49:32 -07:00
Scott Lahteine
f508c54c6c
Use #undef in AZTEEG_X3_PRO for RAMPS overrides
2016-05-01 13:49:32 -07:00
Scott Lahteine
c6f1337f5c
NOOP macro for do-nothing macros
2016-05-01 13:49:32 -07:00
Scott Lahteine
c2145566c7
Merge pull request #3631 from thinkyhead/rc_singletons
...
Encapsulate Stepper, Planner, Endstops in singleton classes
2016-05-01 13:47:47 -07:00
Scott Lahteine
fbf69081b4
Updated comment for THERMAL_PROTECTION_BED
2016-05-01 13:12:51 -07:00
gralco
908229dbb3
Introduce temp watch protection for the bed
...
When setting the bed temp via M140/M190 if the thermistor does not read an increase of WATCH_BED_TEMP_INCREASE degrees by WATCH_BED_TEMP_PERIOD seconds then it will throw "Error:Heating failed, system stopped! Heater_ID: bed" and call the kill() function.
Conflicts:
Marlin/Configuration_adv.h
2016-05-01 13:12:51 -07:00
Scott Lahteine
77d6e5283b
Merge pull request #3648 from Blue-Marlin/83filenames
...
Don't reject 8.3-filenames with chars > 0x7f
2016-04-30 17:48:03 -07:00
Scott Lahteine
24a15332b3
Encapsulate dual Z endstop handling
2016-04-30 17:26:50 -07:00
Scott Lahteine
462a8a951e
A little extra gcode_T spacing
2016-04-30 17:26:50 -07:00
Scott Lahteine
96f51f400f
Planner singleton class
2016-04-30 17:26:50 -07:00
Scott Lahteine
5076d12344
Localize M119 in Endstops class
2016-04-30 17:26:50 -07:00
Scott Lahteine
5e4e535ce8
Stepper and Endstops as singleton objects
2016-04-30 17:26:50 -07:00
Scott Lahteine
6d3e4e1f8f
Prevent stuck M109/M190 when target is changed
2016-04-30 17:03:54 -07:00
Blue-Marlin
ac4caab8f1
Don't mangel 8.3-filenames with chars > 0x7f
...
Don't mangel 8.3-filenames with chars > 0x7f
Windows produces 8.3filenames wit chars > 0x7f. Those have been rejected
by Marlin until now.
With these 'malformed' filenames can now be worked with:
In the LCD menue
With RepetierHost (V1.6.1 tested) - full support. Characters are
displayed as '?'
With Octoprint (1.2.10 tested) the files do not appear in the files
area. At the console, listed with M20 they appear with a '�'.
With Pronterface the files appear in the sd-window but you can't start
them. They are mangled by pronterface. The names are altered and than
recected by Marlin. In the console they apper with differen but not the
correct characters.
All in all a little step forward.
Fix for #3593
2016-04-30 17:37:22 +02:00
Scott Lahteine
eeef571be2
Merge pull request #3613 from thinkyhead/rc_acceleration_fix1
...
Fix an acceleration anomaly by making locals signed
2016-04-29 16:39:31 -07:00
Scott Lahteine
c3ef9993b9
Merge pull request #3625 from jbrazio/feature/print-counter
...
Print job statistics
2016-04-29 15:31:14 -07:00
Scott Lahteine
96b2b3f4fe
Merge pull request #3642 from thinkyhead/rc_quieter_wait_for_temps
...
Keepalive not needed while waiting for temperatures
2016-04-29 15:20:12 -07:00
João Brázio
e34f4653ef
Fixed a typo on the configuration files
2016-04-29 23:13:59 +01:00
João Brázio
1491d682fb
Miscellaneous tweaks on PrintCounter
2016-04-29 23:13:59 +01:00
João Brázio
27088e356f
Updated example configuration files
2016-04-29 23:13:59 +01:00
João Brázio
8fb23e899f
PrintCounter EEPROM read/write optimizations
2016-04-29 23:13:59 +01:00
João Brázio
9589e51810
Disable DEBUG_PRINTCOUNTER
2016-04-29 23:13:59 +01:00
João Brázio
e2da7e5000
Updated the default configuration and fixed a printcounter.h typo
2016-04-29 23:13:58 +01:00
João Brázio
d6cfcc9c8b
Added new G-Code: M78
2016-04-29 23:13:58 +01:00
João Brázio
4f541c5bb5
Added a new object: PrintCounter
2016-04-29 23:13:58 +01:00
João Brázio
26b166d7cf
Made all stopwatch::debug() calls static
2016-04-29 23:13:58 +01:00
Scott Lahteine
5897b58a70
Merge pull request #3634 from esenapaj/patch-2
...
Update distribution date and readme again
2016-04-28 21:19:08 -07:00
Scott Lahteine
f4706bb90e
Keepalive not needed while waiting for temperatures
2016-04-28 21:11:15 -07:00
Scott Lahteine
924285afa6
Merge pull request #3641 from thinkyhead/rc_reverse_menu_doc
...
Correct the REVERSE_MENU_DIRECTION comment
2016-04-28 20:28:46 -07:00
Scott Lahteine
f1b00eb12b
Correct the REVERSE_MENU_DIRECTION comment
2016-04-28 20:27:17 -07:00
Scott Lahteine
8905908081
Merge pull request #3632 from thinkyhead/i3_millie_language_fun
...
Simplified LCD Language settings
2016-04-28 19:52:10 -07:00
Scott Lahteine
6c48852b20
Update distribution date
2016-04-28 18:06:53 +09:00
Scott Lahteine
2142d5a62e
Merge pull request #3627 from Blue-Marlin/German-again-and-again-and-agin
...
Correct an error in lang_de
2016-04-27 20:14:15 -07:00
Scott Lahteine
0c11566f42
Replace LANGUAGE_INCLUDE with LCD_LANGUAGE
2016-04-27 20:06:40 -07:00
Scott Lahteine
259794c0be
Make DISPLAY_CHARSET_HD44780 a single setting
2016-04-27 20:06:40 -07:00
Blue-Marlin
e89f01d044
Correct an error in lang_de
...
There is no way to translate "A-travel" to "A Rückzug". Thats simply
wrong.
2016-04-27 12:59:48 +02:00
esenapaj
ee2f37f3cc
Update distribution date and readme
...
It sync with the RC.
2016-04-27 11:21:51 +09:00
Scott Lahteine
ad0f70f2f3
Merge pull request #3620 from Blue-Marlin/feedrate_atfer_toolchange
2016-04-26 17:33:15 -07:00
Scott Lahteine
d58c5ac446
Merge pull request #3618 from esenapaj/patch-1
2016-04-26 17:20:04 -07:00
Scott Lahteine
2bb5cf5291
Merge pull request #3622 from floyd871/patch-1
2016-04-26 17:14:36 -07:00
Blue-Marlin
e58e281473
Fix feedrate after toolchange
...
The fix is simple. Most changes are because of changed indendation,
bacause of leaving early for wrong tool number
2016-04-27 00:57:45 +02:00
João Brázio
32d798fcc7
Converted all files on src to Unix file format
2016-04-26 21:23:39 +01:00
Michael Neumann
59cfc84dad
German "Umlaute"
...
We don't have to avoid German "Umlaute" any more.
2016-04-26 21:52:05 +02:00
Matt Keveney
4dfc496965
added recalc_delta_settings() call in Config_RetrieveSettings. Appears to be necessary any time delta-related parameters (M665) are modified
2016-04-26 20:01:53 +09:00
Scott Lahteine
ec82e1e05d
Merge pull request #3616 from thinkyhead/rc_fixup_some_movement
...
General cleanup around high level move functions
2016-04-25 20:23:38 -07:00
Scott Lahteine
abeab792cb
General cleanup around high level move functions
...
- Use new `DEBUG_POS` macro for `DELTA` debug
- Neaten up `prepare_move` a smidgen
- Remove an old commented `prepare_move()` line
2016-04-25 20:02:24 -07:00
Scott Lahteine
66540f8b84
Merge pull request #3615 from thinkyhead/rc_whats_up_with_M112
...
Report current position to host after M206 / M428
2016-04-25 18:58:41 -07:00
Scott Lahteine
68d0347e67
Call report_current_position after M206 / M428
2016-04-25 18:43:28 -07:00
Scott Lahteine
dcb4cdaa9e
Call report_current_position instead of gcode_M114 directly
2016-04-25 18:43:27 -07:00
Scott Lahteine
e38baaa23e
Fix an acceleration anomaly by making locals signed
2016-04-25 14:17:20 -07:00
João Brázio
739dcda0f1
Renamed stopwatch::status to stopwatch::state
2016-04-25 17:40:43 +01:00
gralco
840e13f664
Introduce M108 cancel heatup for the hotend and bed
...
This G-code is asynchronously handled in the get_serial_commands() parser.
2016-04-25 08:33:33 -06:00
Scott Lahteine
fce1e843b9
Patch steps rate comment in trapezoid function
2016-04-24 19:38:58 -07:00
João Brázio
7de0161204
Updated example config files
2016-04-24 05:21:17 +01:00
João Brázio
3b6f75511f
Updated multiple pins files
2016-04-24 05:21:17 +01:00
João Brázio
170f7e8a45
Rework Marlin's versioning system
2016-04-24 05:21:17 +01:00
esenapaj
8d0b2f358a
Cleanup for language files
...
・Remove abolished strings (MSG_NOZZLE1, MSG_NOZZLE2)
・Remove duplicated strings
・Arrange the strings in unified order
・Adjust spacing
・Remove some comments in Japanese files(follow-up the PR #3560 )
The most part of these changes were salvaged from closed my PR#3550.
2016-04-23 13:27:05 +09:00
Scott Lahteine
2bb56ef6de
Merge pull request #3597 from thinkyhead/rc_fix_g29_debug
...
Move G29 debug output before matrix.set_to_identity()
2016-04-22 21:21:00 -07:00
João Brázio
a901555da4
Moved G29 debug output before matrix.set_to_identity()
2016-04-22 20:57:22 -07:00
Scott Lahteine
88c6693b9e
Fix a typo in #3586 to fix MBL
2016-04-22 20:04:08 -07:00
Scott Lahteine
aaf9d19954
Allow Z_SAFE_HOMING to compile without a probe
2016-04-21 15:55:49 -07:00
Scott Lahteine
92ab2c7dd8
Merge pull request #3587 from thinkyhead/rc_z_safe_homing_deps
...
Define dependencies for Z_SAFE_HOMING if left out
2016-04-21 15:46:24 -07:00
Scott Lahteine
63142eef40
Define dependencies for Z_SAFE_HOMING if left out
2016-04-21 15:22:19 -07:00
Scott Lahteine
173334e535
Merge pull request #3418 from jbrazio/translate/danish
...
Missing Danish translation
2016-04-21 14:56:43 -07:00
João Brázio
fe4fc88494
Closes #3351 : missing Danish translation
2016-04-21 21:31:47 +01:00
Scott Lahteine
003aab6dfd
Revert MBL menus to "known" working point
2016-04-21 12:59:55 -07:00
Scott Lahteine
6fac4d9211
Merge pull request #3579 from thinkyhead/rc_fix_dogm_and_mbl_menus
...
Fix menu redraw for DOGLCD, improve MBL
2016-04-20 20:52:56 -07:00
Scott Lahteine
7ddaa79ffe
Merge pull request #3578 from thinkyhead/rc_fix_twibus_less_debug_code
...
Reduce PROGMEM usage by TWIBus, stopwatch
2016-04-20 20:52:16 -07:00
Scott Lahteine
cfd10fcba1
Merge pull request #3577 from thinkyhead/rc_fix_G92_set_e_twice
...
Fix G92 setting E twice
2016-04-20 20:52:09 -07:00
Scott Lahteine
dc2281d2f4
Add nextMenu, nextEncoderPosition to change menus after handler loop
2016-04-20 20:19:12 -07:00
Scott Lahteine
7fa2bda1b9
Give the "alive dot" its own blink
2016-04-20 18:57:17 -07:00
Scott Lahteine
9d5e1f32fd
Use axis_homed in _lcd_level_bed_homing, item in Prepare before homing
2016-04-20 18:53:33 -07:00
Scott Lahteine
0c2aa92b07
Z Safe Homing for all
...
The `Z_SAFE_HOMING` feature is coupled with probes and not leveling, so
make it available for general use.
2016-04-20 17:04:52 -07:00
Scott Lahteine
9bcb72e7f8
Further patches to MBL - break up into more handlers
2016-04-20 16:37:35 -07:00
Scott Lahteine
3f6ae85748
Fix some MBL display issues for DOGLCD
2016-04-20 16:36:45 -07:00
Scott Lahteine
71b4f189bf
lcd_implementation_drawedit can take 1 arg
2016-04-20 16:36:45 -07:00
Scott Lahteine
1caa2628da
Use sync_plan_position_e function elsewhere
2016-04-20 13:02:19 -07:00
Scott Lahteine
c7df961144
Fix G92 so it only sets the plan position once
2016-04-20 13:01:58 -07:00
Scott Lahteine
1addb50b62
Shrink debug code in TWIBus and disable by default
2016-04-20 12:44:30 -07:00
Scott Lahteine
21a6b66807
Shrink debug code in Stopwatch and disable by default
2016-04-20 12:44:30 -07:00
Scott Lahteine
e523a0dc61
Fix bug in TWIBus ctor declaration
2016-04-20 12:37:46 -07:00
Scott Lahteine
ee9bd66a68
Add comments to debug bit flags
2016-04-20 12:37:22 -07:00
Scott Lahteine
3db5a75f30
Merge pull request #3568 from thinkyhead/rc_various_fixes
...
General code cleanup, improved naming, etc.
2016-04-19 20:53:38 -07:00
Scott Lahteine
8a2587f017
Read size for MAX6675 from sizeof(max6675_temp)
2016-04-19 19:57:32 -07:00
Scott Lahteine
ac69fad96d
lowercase "stop" function
2016-04-19 19:43:54 -07:00
Scott Lahteine
39ee9c526b
setTargetedHotend => get_target_extruder_from_command
2016-04-19 19:43:54 -07:00
Scott Lahteine
cafa8b8ce3
Rename filament runout items
2016-04-19 19:43:39 -07:00
Scott Lahteine
27b2e2e786
Document some variables
2016-04-19 19:43:39 -07:00
Scott Lahteine
a4062a47ac
Rename baricuda variables
2016-04-19 19:43:38 -07:00
Scott Lahteine
78747b1328
min_pos/max_pos => sw_endstop_min/sw_endstop_max
2016-04-19 19:43:38 -07:00
Scott Lahteine
ba84d8d091
Allow setting PIDTEMP and PIDTEMPBED together or apart
2016-04-19 18:09:29 -07:00
Scott Lahteine
5cb8ec68ae
Merge pull request #3566 from thinkyhead/rc_babystep_show_steps
...
Show steps done in the babystep display
2016-04-18 21:52:55 -07:00
Scott Lahteine
3083ee49f3
Merge pull request #3567 from thinkyhead/rc_mf_bash_scripts
...
Git helper shell scripts for MarlinFirmware
2016-04-18 21:41:24 -07:00
Scott Lahteine
00d36d10e2
Merge pull request #3560 from thinkyhead/rc_better_graphical_lcd
...
Aesthetic, functional improvements for Graphical Display
2016-04-18 21:38:02 -07:00
Scott Lahteine
dd94ce5bd5
Merge pull request #3565 from thinkyhead/rc_look_at_3563
...
Output error message for M303 if PIDTEMP is disabled
2016-04-18 21:22:50 -07:00
Scott Lahteine
9a12054e0e
Git helper shell scripts for MarlinFirmware
2016-04-18 21:18:35 -07:00
Scott Lahteine
4f04bf7fe8
Show steps done in the babystep display
2016-04-18 20:52:38 -07:00
Scott Lahteine
d988708ceb
Merge pull request #3559 from esenapaj/patch-1
...
Update and change Japanese translation
2016-04-18 20:17:54 -07:00
Scott Lahteine
026ae8f2f0
Call lcd_setFont only when needed
2016-04-18 20:09:04 -07:00
Scott Lahteine
90c97c8185
Add _draw_axis_label function to reduce source
2016-04-18 20:09:04 -07:00
Scott Lahteine
34b17d4a8a
Reduce heater status code if no bed
2016-04-18 20:09:04 -07:00
Scott Lahteine
fc30aa9d88
Aesthetic and functional improvements for graphical LCD
2016-04-18 20:09:04 -07:00
Scott Lahteine
b281001329
Use MSG_X, etc., on Hitachi LCD
2016-04-18 20:09:04 -07:00
Scott Lahteine
f90a8661cb
Uppercase XYZE on Graphical LCD
2016-04-18 20:09:03 -07:00
Scott Lahteine
3613c550fa
Rename README file for fonts
2016-04-18 20:09:03 -07:00
esenapaj
1110814ecf
Update and change Japanese translation
...
Update and change Japanese translation
・Follow-up the PR #3411(Update Readme.fonts about Kana), Remove "who really..." strings. I had forgotten it.
・Add readable translated strings in comment
・Add Japanese translation.
MSG_LCD_ENDSTOPS "エンドストップ"
(utf8 version only. Because non-utf8 version ("ｴﾝﾄﾞｽﾄｯﾌﾟ") over 8 characters)
・Change translation.
MSG_ACC "カソクド mm/s2"
MSG_ACC "\xb6\xbf\xb8\xc4\xde mm/s2" ("ｶｿｸﾄﾞ mm/s2")
2016-04-19 11:28:26 +09:00
Scott Lahteine
a26d70e932
Apply indentation to gcode_M303, PID_autotune
2016-04-18 19:04:45 -07:00
Scott Lahteine
ba66336503
Output error for disabled M303
2016-04-18 19:03:45 -07:00
Scott Lahteine
eda821ca1c
Merge pull request #3556 from philfifi/fix_pullup
...
Fix bug in pullups handling for Z_MIN_PROBE
2016-04-18 18:04:26 -07:00
Scott Lahteine
25b1556a94
Merge pull request #3552 from tnw513/fix_endstops_witbox
...
Endstop settings modified (witbox). Issue #3547
2016-04-18 18:03:22 -07:00
Scott Lahteine
2bc2485313
Update font remarks in Conditionals.h
2016-04-18 17:33:41 -07:00
Philippe LUC
86c868771b
Fix bug in pullups handling for Z_MIN_PROBE
2016-04-18 21:16:23 +02:00
Silvio Didonna
91de69bb6e
Endstop settings modified. Witbox have max endstops for X and Y.
2016-04-18 16:46:19 +02:00
Scott Lahteine
f2558b1f2c
Additional delta config updates
2016-04-17 20:04:52 -07:00
Marc Urben
9a661bdd59
Updated Kossel XL config files for the latest Marlin
2016-04-17 20:04:19 -07:00
Scott Lahteine
09c6323b68
Merge pull request #3543 from thinkyhead/rc_better_bootscreen
...
Better splash screen consolidation
2016-04-17 17:20:13 -07:00
Scott Lahteine
5905ec5ba8
Merge pull request #3541 from thinkyhead/rc_mbl_one_last_lift
...
Add a final lift, if configured, in Manual Bed Leveling
2016-04-17 17:20:02 -07:00
Scott Lahteine
af1711365b
Merge pull request #3538 from jbrazio/bugfix/endtop-hit-redeclared
...
_ENDSTOP_HIT redeclared
2016-04-17 17:12:56 -07:00
Scott Lahteine
ed622ac796
Better splash screen consolidator
2016-04-17 17:06:07 -07:00
Jeff K
90c49f5a14
Fixed invalid addressing (overflow) of position_shift / software endstops
...
Signed-off-by: Jeff K
2016-04-17 19:28:50 -04:00
João Brázio
bcf1e027bb
Fix the redeclaration of _ENDSTOP_HIT
2016-04-17 18:37:37 +01:00
Scott Lahteine
c242bee449
Add a final lift, if configured, in Manual Bed Leveling
2016-04-17 00:12:46 -07:00
Scott Lahteine
b6227932f5
Merge pull request #3530 from thinkyhead/rc_set_rcbugfix_for_now
...
Set version for RCBugFix
2016-04-16 21:40:55 -07:00
Scott Lahteine
19741a0ba6
Merge pull request #3503 from thinkyhead/rc_lcd_endstop_msg
...
Show all endstops on LCD in checkHitEndstops
2016-04-16 21:32:25 -07:00
Scott Lahteine
7aaff371b0
Set version for RCBugFix
2016-04-16 21:30:52 -07:00
Scott Lahteine
db86aaf385
Merge pull request #3528 from thinkyhead/rc_fix_bed_level_equation_oopsie
...
Fix borked set_bed_level_equation_lsq
2016-04-16 21:01:06 -07:00
Scott Lahteine
837df6108c
Fix borked set_bed_level_equation_lsq
2016-04-16 20:35:42 -07:00
Scott Lahteine
7c16e774ca
Show all endstops on LCD in checkHitEndstops
2016-04-16 20:08:42 -07:00
Scott Lahteine
40050db210
Improve code in Sd2Card::readBlock
2016-04-16 20:03:39 -07:00
Scott Lahteine
8429ae6beb
Merge pull request #3525 from thinkyhead/rc_fix_pid_params_per_extruder
...
Fix broken PID_PARAMS_PER_EXTRUDER
2016-04-16 19:49:42 -07:00
Scott Lahteine
339b5b3e34
Patch more configs with new changes
2016-04-16 19:35:02 -07:00
Scott Lahteine
ef2fd620e9
Suggested fixups for LCD/SD config comments
2016-04-16 19:35:02 -07:00
João Brázio
7b5d6ba315
Rebase & feedback
2016-04-16 19:35:02 -07:00
João Brázio
d7cc2c0847
Moved some conditionals to Conditionals.h
2016-04-16 19:32:41 -07:00
João Brázio
36a49eab1c
Improved the LCD and SD comments blocks in Configuration.h
2016-04-16 19:32:41 -07:00
Scott Lahteine
d4a848c72a
Fix broken PID_PARAMS_PER_EXTRUDER
...
As noted by @FalloutBe in #3519
2016-04-16 19:19:40 -07:00
Scott Lahteine
0fc84b75f4
Merge pull request #3522 from esenapaj/patch-1
...
Follow-up and fix for the PR #3453(ELAPSED / PENDING for rollover-safe time checking)
2016-04-16 19:03:27 -07:00
Scott Lahteine
4b75b11a53
Wrap defines in parentheses in configs, M48
2016-04-16 18:21:09 -07:00
esenapaj
832e1c1f2a
Follow-up and fix for the PR #3453(ELAPSED / PENDING for rollover-safe time checking)
...
・Add more "UL" suffix
・Restore removed "UL" suffix
2016-04-17 07:50:02 +09:00
Scott Lahteine
234987ee2f
Fix MBL lift
2016-04-16 14:17:06 -07:00
Scott Lahteine
e0830bf8f1
Don't use LCD alert unless error or alert level is reset later
2016-04-15 18:48:49 -07:00
Scott Lahteine
773229b020
Merge pull request #3515 from thinkyhead/rc_wider_splash
...
On wider screens show a wider splash page, if possible
2016-04-15 17:26:01 -07:00
Scott Lahteine
86467c24be
On wider screens show a wider splash page, if possible
2016-04-15 16:42:29 -07:00
Scott Lahteine
a8e4d7c135
Merge pull request #3477 from alephobjects/BedTempHysteresis
...
Implementation of M190 bed temp hysteresis
2016-04-15 16:20:58 -07:00
esenapaj
5ecd75eeb3
Fix for PR #3502(General cleanup of arc code)
2016-04-16 07:22:07 +09:00
gralco
8ec8d59df8
Use #if TEMP_RESIDENCY_TIME > 0 rather than #ifdef TEMP_RESIDENCY_TIME
2016-04-15 11:20:32 -06:00
Scott Lahteine
1cc622b167
Fix minor spelling in comments
2016-04-14 20:06:59 -07:00
Scott Lahteine
866c5be395
Merge pull request #3500 from thinkyhead/rc_shrink_menu_macros
...
Reduce redundancy in MENU_ITEM code
2016-04-14 19:09:14 -07:00
Scott Lahteine
6e52b0b723
Merge pull request #3504 from thinkyhead/rc_fix_debugging
...
Fix debugging of vector_3
2016-04-14 19:08:30 -07:00
Scott Lahteine
88367a37f7
Merge pull request #3227 from thinkyhead/rc_home_offsets_and_limits
...
Relating current_position, min_pos, max_pos, and home_offset
2016-04-14 18:50:43 -07:00
Scott Lahteine
b20bf1826d
Fix debugging of vector_3
2016-04-14 18:45:26 -07:00
Scott Lahteine
4fb8013be1
Reduce redundancy in MENU_ITEM code
2016-04-14 18:42:06 -07:00
Scott Lahteine
b243844690
Merge pull request #3502 from thinkyhead/rc_fix_arcs_bugs
...
General cleanup of arc code
2016-04-14 18:19:44 -07:00
Scott Lahteine
f2abfd6d48
Merge pull request #3501 from thinkyhead/rc_config_comment_cleanup
...
Update some comments in Configuration.h
2016-04-14 18:19:29 -07:00
Scott Lahteine
2129db581e
Simplify MBL movement, zigzag
2016-04-14 16:58:42 -07:00
Scott Lahteine
0493fccc0b
mbl.active is a bool now
2016-04-14 16:58:42 -07:00
Scott Lahteine
b05f448317
Comments on MBL menu items
2016-04-14 16:58:42 -07:00
Scott Lahteine
e08dd0d831
Merge pull request #3498 from thinkyhead/rc_preheat_abs_both_3489
...
Fix bug in lcd_preheat_pla0123 and lcd_preheat_abs0123
2016-04-14 16:57:38 -07:00
Scott Lahteine
9e95f30de0
Merge pull request #3495 from jbrazio/bugfix/followup-3485
...
Throw an error if ENCODER_PULSES_PER_STEP < -1
2016-04-14 16:56:36 -07:00
Scott Lahteine
8e5099fa0c
Update software endstop positions with M206, M428, G92, etc.
2016-04-14 16:47:22 -07:00
Scott Lahteine
5cfb2533d6
Initial cleaning up of arc code
2016-04-14 16:43:49 -07:00
Scott Lahteine
de8c0baf8b
Update some comments in Configuration.h
2016-04-14 16:41:20 -07:00
Scott Lahteine
fda8f96f00
Fix bug in lcd_preheat_pla0123 and lcd_preheat_abs0123
...
Trying to preheat a non-existent extruder causes a crash.
2016-04-14 15:48:43 -07:00
João Brázio
9a3f676709
Throw an error if ENCODER_PULSES_PER_STEP < -1
2016-04-14 16:20:17 +01:00
gralco
69c00aea4c
Include bed hysteresis setting in the example configs
2016-04-14 08:03:38 -06:00
Scott Lahteine
9ce4264fda
Merge pull request #3490 from thinkyhead/rc_mbl_adjustments
...
Document some movement functions, rename a local
2016-04-13 20:55:20 -07:00
Scott Lahteine
f8e10ff1d8
Merge pull request #3491 from thinkyhead/rc_mechanical_probe
...
Support for "mechanical probe" with Allen Key as a special case
2016-04-13 20:55:14 -07:00
Scott Lahteine
7eb476597f
Update some comments in Configuration.h
2016-04-13 20:34:42 -07:00
esenapaj
2eb1b102f8
Support for "mechanical probe" with Allen Key as a special case
2016-04-13 20:34:12 -07:00
Scott Lahteine
cfcd3d7b3e
Rename z_offset local to zoffset
2016-04-13 20:09:20 -07:00
Scott Lahteine
5fd20ecac3
Comments on some movement functions
2016-04-13 20:09:20 -07:00
Scott Lahteine
c1b953d38f
Merge pull request #3487 from thinkyhead/rc_redo_esenpaj_3479
...
Apply esenapaj 3479 and delta/scara position bugfix
2016-04-13 18:11:33 -07:00
Scott Lahteine
a781a6f955
Apply esenapaj 3479 and delta/scara position bugfix
2016-04-13 17:41:20 -07:00
Scott Lahteine
2ae7394640
More fine-grained control of LCD redraw
2016-04-12 21:34:34 -07:00
Scott Lahteine
525d8256d4
Merge pull request #3481 from thinkyhead/rc_extruder_offset_array
...
Fix: gcode_T using non-existent Z offset
2016-04-12 18:23:08 -07:00
Scott Lahteine
b9301e6c62
Merge pull request #3482 from thinkyhead/rc_fix_HAS_Z_MIN_PROBE
...
Patch conditions for HAS_Z_MIN_PROBE
2016-04-12 18:23:02 -07:00
Scott Lahteine
dc0a3e37be
Patch conditions for HAS_Z_MIN_PROBE
2016-04-12 18:11:36 -07:00
Scott Lahteine
46881c846c
Add comments for extruder offset options
2016-04-12 17:16:58 -07:00
Scott Lahteine
edf376ce0d
Fix: gcode_T using non-existent Z offset
...
As noted by @snowzach in #3461
2016-04-12 17:15:10 -07:00
gralco
178aeb79c8
Implementation of M190 bed temp hysteresis
2016-04-12 08:56:14 -06:00
Scott Lahteine
0439483bc8
Merge pull request #3476 from thinkyhead/rc_debug_leveling_gcode_t
...
Add DEBUG_LEVELING output for gcode_T
2016-04-11 21:03:15 -07:00
Scott Lahteine
c03e5f5efd
Merge pull request #3475 from thinkyhead/rc_language_cleanup
...
General cleanup of language files
2016-04-11 20:50:57 -07:00
Scott Lahteine
910d3648bb
Merge pull request #3474 from thinkyhead/rc_russian_apr2016
...
Additional Russian translations
2016-04-11 20:50:50 -07:00
Scott Lahteine
63d8893f5d
Add DEBUG_LEVELING output for gcode_T
2016-04-11 20:45:10 -07:00
Scott Lahteine
081cfc5cf3
Merge pull request #3472 from thinkyhead/fix_issue_3375
...
Initialize stepper counts for Delta/SCARA
2016-04-11 19:59:12 -07:00
Scott Lahteine
fe0fe184aa
Replace some tabs with spaces
2016-04-11 19:42:20 -07:00
Scott Lahteine
e773d081c0
General language file cleanup
2016-04-11 19:42:09 -07:00
Scott Lahteine
b63c79b5ff
Merge pull request #3473 from thinkyhead/rc_one_more_elapse
...
Fix a messed up ELAPSED instance
2016-04-11 19:30:59 -07:00
Scott Lahteine
068bc980ce
Additional Russian translations
...
Thanks to @gans-AD – #3363
2016-04-11 19:30:14 -07:00
Scott Lahteine
f840c7de4d
Initialize stepper counts for Delta/SCARA
2016-04-11 19:02:35 -07:00
Scott Lahteine
c5a8755cc0
Fix a messed up ELAPSED instance
2016-04-11 18:48:27 -07:00
Scott Lahteine
81918657f4
Fix Deutsch string errors, redundancies
2016-04-11 18:12:32 -07:00
Scott Lahteine
56acaf3594
Merge pull request #3469 from thinkyhead/rc_aleph_cooldownfix
...
Fix for M109 and M190 cooldown
2016-04-11 18:01:01 -07:00
gralco
c218db136a
Fix for M109 and M190 cooldown
...
Also removes the re-definition of now inside M190's while loop
2016-04-11 17:12:23 -07:00
Scott Lahteine
e2a197ab71
Merge pull request #3467 from AnHardt/Fix-Servo-without-endstop-probe
...
Fix-Servo-without-endstop/probe
2016-04-11 17:04:54 -07:00
Scott Lahteine
3a1ac14bbc
Merge pull request #3437 from thinkyhead/rc_lcd_encoder_movement
...
More bits when encoderPosition is cast as signed
2016-04-11 17:03:23 -07:00
Scott Lahteine
c5a2ce4366
Merge pull request #3446 from thinkyhead/rc_fixup_M206_and_mesh
...
Fix home_offset handling and account for it in G29
2016-04-11 16:49:01 -07:00
Scott Lahteine
b1bb1c7989
Merge pull request #3466 from thinkyhead/rc_look_for_leveling_bug
...
Add CORE support to st_set_position and plan_set_position
2016-04-11 16:45:00 -07:00
AnHardt
9cc571b312
Fix-Servo-without-endstop-probe
...
Sorry for not having realized someone (me) redefined not existing servo pinns to -1, some lines above.
This is a simple error - not a feature.
2016-04-12 01:01:11 +02:00
Scott Lahteine
3e5312f116
CORE support for st_set_position & plan_set_position
2016-04-11 15:13:42 -07:00
Scott Lahteine
e087a99a10
Some cleanup of st_get_pos functions
2016-04-11 15:13:42 -07:00
João Brázio
ca6c6ec4ca
Versions of Arduino IDE prior to 1.6.0 are no longer supported
2016-04-11 19:03:06 +01:00
Scott Lahteine
fdee2be49c
More logging of matrix behavior
2016-04-11 00:06:33 -07:00
Scott Lahteine
7f265db3ef
Move sync_plan_position after DEBUG_LEVELING
2016-04-10 23:40:11 -07:00
Scott Lahteine
02550af7c3
Merge pull request #3453 from thinkyhead/rc_jbrazio_m190
...
ELAPSED / PENDING for rollover-safe time checking
2016-04-10 20:25:02 -07:00
Scott Lahteine
7c770f039c
Merge pull request #3456 from thinkyhead/rc_MSG_ERR_REDUNDANT_TEMP
...
Remove redundant text from MSG_ERR_REDUNDANT_TEMP
2016-04-10 20:23:55 -07:00
Scott Lahteine
925cc305ce
Merge pull request #3455 from michos-conradt/RCBugFix
...
Add missing translations for German
2016-04-10 19:18:42 -07:00
Scott Lahteine
011f4736f1
Remove redundant text from MSG_ERR_REDUNDANT_TEMP
2016-04-10 19:14:46 -07:00
Scott Lahteine
906c1c066f
Merge pull request #3423 from jbrazio/translate/pt_BR
...
Added missing pt_BR translation
2016-04-10 19:13:52 -07:00
Scott Lahteine
803845ec18
Add a case for M113 to process_next_command
2016-04-10 18:53:03 -07:00
Michael Conradt
f3a7a5c99b
Merge branch 'RCBugFix' into translations
2016-04-11 03:50:23 +02:00
Michael Conradt
8b923039e2
Add missing german translations.
2016-04-11 03:20:21 +02:00
Scott Lahteine
386140f361
Test time difference in safe way
2016-04-10 18:09:31 -07:00
Scott Lahteine
1b7356b3a1
Account for home_offset in G29 handler
2016-04-10 15:35:02 -07:00
Scott Lahteine
f3562dd895
Have M206 alter current_position, M428 use new function
2016-04-10 15:35:01 -07:00
Scott Lahteine
562e281c73
Merge pull request #3443 from thinkyhead/rc_host_timeout_tweak
...
Adjust timeout code in host_keepalive
2016-04-09 17:45:36 -07:00
Scott Lahteine
6d465321b5
Adjust timeout code in host_keepalive
2016-04-09 16:58:17 -07:00
Scott Lahteine
8198cc30b5
More bits when encoderPosition is cast as signed
2016-04-09 14:22:12 -07:00
Michael Neumann
95acba2cfa
Wrong Pin Assignment Megatronics 3
...
SERVO2 is doubled defined and causes compiler errors
2016-04-09 11:23:22 +02:00
Scott Lahteine
50c3140040
Merge pull request #3414 from thinkyhead/rc_host_timeout_mods
...
Host Keepalive configurable timeout with 2s default
2016-04-08 21:45:45 -07:00
Scott Lahteine
6bd20371f0
Merge pull request #3438 from thinkyhead/rc_M109_residency_loop_fix
...
Fix bug which can cause an infinite M109 loop
2016-04-08 21:36:30 -07:00
Scott Lahteine
96e37bb70a
Merge pull request #3419 from DavidBjerreBjoerklund/patch-2
...
Update language_da.h
2016-04-08 21:35:58 -07:00
Scott Lahteine
13d758c651
Merge pull request #3420 from DavidBjerreBjoerklund/patch-3
...
Update language_da.h
2016-04-08 21:31:14 -07:00
Scott Lahteine
518068a5a8
Merge pull request #3425 from tnw513/FixLangIt
...
Optimized Italian strings to fit in 16 character display
2016-04-08 21:29:28 -07:00
Scott Lahteine
1b81e5adc7
Merge pull request #3431 from AnHardt/lang-de
...
de-language additions
2016-04-08 21:25:00 -07:00
Scott Lahteine
1acf901b63
Adjustments to residency_start_ms handling
2016-04-08 21:20:23 -07:00
gralco
907aed57db
Fix bug which can cause an infinite M109 loop
...
Since residency_start_ms is -1 when entering the heatup while loop whilst the hotend temp is close to the target them already then it may not escape.
Hence "Start the TEMP_RESIDENCY_TIME timer when we reach target temp for the first time."
2016-04-08 21:20:23 -07:00
jbrazio
dd3a06a95a
Implemented M155 and M156, a generic TWI/I2C interface for Marlin
2016-04-08 20:14:37 -07:00
Scott Lahteine
843aa90b5a
Merge pull request #3434 from thinkyhead/rc_more_debug_leveling
...
Additional debug leveling output
2016-04-08 18:57:18 -07:00
Scott Lahteine
a644ab1de4
Minor patch ups to G29
...
This may fix a subtle bug caused by doing `G29` more than once without
`G28` between.
2016-04-08 17:53:15 -07:00
Scott Lahteine
cba2698871
Additional DEBUG_LEVELING output
2016-04-08 17:53:15 -07:00
AnHardt
c3d1b7db2d
de-language additions
2016-04-08 22:51:04 +02:00
Scott Lahteine
4e17187c96
Merge pull request #3426 from thinkyhead/rc_no_unhomed_lcd_move_on_delta_scara
...
No LCD Move for unhomed Delta/SCARA
2016-04-07 19:29:45 -07:00
Scott Lahteine
5e18d650c4
Merge pull request #3427 from thinkyhead/rc_better_SERIAL_ECHOPAIR
...
No casting needed for SERIAL_ECHOPAIR
2016-04-07 19:29:18 -07:00
Scott Lahteine
e0b0d1eb6b
Add M113 to get/set Host Keepalive
2016-04-07 19:25:56 -07:00
Scott Lahteine
85883da90c
Implement basic HOST_KEEPALIVE_INTERVAL
2016-04-07 19:25:56 -07:00
Scott Lahteine
2eca8d63b3
Add DEFAULT_KEEPALIVE_INTERVAL setting
2016-04-07 19:25:56 -07:00
Scott Lahteine
098fb8f8c9
Merge pull request #3413 from thinkyhead/rc_probe_G30_position
...
Report the probe position in G30
2016-04-07 19:25:33 -07:00
Scott Lahteine
3460d01441
Merge pull request #3422 from jbrazio/translate/pt_PT
...
Update pt_PT translation
2016-04-07 19:18:56 -07:00
Scott Lahteine
c9c7c66b95
Merge pull request #3421 from jbrazio/bugfix/m109-EXTRUDE_MINTEMP-expansion
...
M109: Protect against EXTRUDE_MINTEMP expansion
2016-04-07 19:18:34 -07:00
Scott Lahteine
d7cbb2eec9
Merge pull request #3403 from jbrazio/feature/stopwatch
...
Print job timer rework
2016-04-07 19:18:03 -07:00
Scott Lahteine
f834bcd43a
Merge pull request #3415 from thinkyhead/rc_filwidth_issue
...
Fix FILAMENT_WIDTH_SENSOR measurement
2016-04-07 19:08:42 -07:00
Scott Lahteine
5fc6daba2b
Disallow REPRAPWORLD_KEYPAD moves on Delta/SCARA until homed
2016-04-07 18:40:54 -07:00
Scott Lahteine
7bb15a1c57
Consolidate REPRAPWORLD_KEYPAD definitions
2016-04-07 18:40:54 -07:00
Scott Lahteine
dc19b69697
No casting needed for SERIAL_ECHOPAIR
2016-04-07 16:33:21 -07:00
Scott Lahteine
165e73794a
Tweak encoderPosition non-zero test
2016-04-07 16:09:42 -07:00
Scott Lahteine
479d307a44
Disable LCD Move XYZ for unhomed Delta/SCARA
2016-04-07 16:09:42 -07:00
Silvio Didonna
9088802da1
Optimized Italian strings to fit in 16 character display
2016-04-07 19:18:22 +02:00
João Brázio
801cd48a72
Added missing pt_BR translation
2016-04-07 13:07:57 +01:00
João Brázio
013f19054b
Update pt_PT translation
2016-04-07 13:00:08 +01:00
João Brázio
471d30cc1c
M109: Protected against EXTRUDE_MINTEMP expansion
2016-04-07 12:50:57 +01:00
DavidBjerreBjoerklund
5f840d2e30
Update language_da.h
...
Corrected:
MSG_KILLED
MSG_NO_MOVE
MSG_STOPPED
MSG_PRINT_ABORTED
MSG_ON
MSG_OFF
2016-04-07 13:42:27 +02:00
João Brázio
7c7e30f4cc
Adherence to the new OOP coding standards
2016-04-07 12:41:09 +01:00
DavidBjerreBjoerklund
b80b40a578
Update language_da.h
...
Added translation mentioned in issue #3351 :
Homing would be best tranlated homing, or "Kører til udgangsposition".
#define MSG_SET_HOME_OFFSETS
#define MSG_LEVEL_BED_HOMING
#define MSG_LEVEL_BED_WAITING
#define MSG_LEVEL_BED_DONE
#define MSG_LEVEL_BED_CANCEL
#define MSG_HOME_OFFSETS_APPLIED
2016-04-07 12:52:31 +02:00
Scott Lahteine
573d772c92
Merge pull request #3416 from paulusjacobus/RCBugFix
...
Optimised Ducth messages to fit in 16 Char display Update language_nl.h
2016-04-06 20:41:14 -07:00
paulusjacobus
3f7ae9a7ce
Update language_nl.h
...
Optimised all added messages to fit within 16 Characters
2016-04-07 13:15:00 +10:00
Scott Lahteine
865dcf3fb4
Fix FILAMENT_WIDTH_SENSOR measurement
...
Only measure and store filament width when E is going forward.
2016-04-06 19:48:04 -07:00
Scott Lahteine
2f6c5fe2da
Report the probe position in G30
2016-04-06 16:55:21 -07:00
Scott Lahteine
74effedbf5
Merge pull request #3412 from paulusjacobus/RCBugFix
...
rebased my fork with RCBugFix release in order to push language_nl.h
2016-04-06 16:53:35 -07:00
Scott Lahteine
bba1f16589
Merge pull request #3411 from esenapaj/patch-1
...
Update Readme.fonts about Kana
2016-04-06 16:19:19 -07:00
Paul de Groot
48a4410f02
rebased my fork with RCBugFix release in order to push language_nl.h
2016-04-07 08:17:59 +10:00
esenapaj
ff9511b870
Update Readme.fonts about Kana
...
I think that that sentence has been completed its part.
Because Kana fonts were revised by me the other day(PR #3289 ), who am a native Japanese.
And for @AnHardt,
I'd like to take this opportunity to express one's heartfelt gratitude as a far eastern person,
about you has been maintaining the resource of Japanese despite you are a far western person.
2016-04-07 07:13:46 +09:00
Silvio Didonna
e215c7100d
fixed mistranslations and minor changes for consistency between "it" and "en" files.
2016-04-06 16:45:04 +02:00
Silvio Didonna
6208db3b00
fixed mistranslations and minor changes for consistency between "it" and "en" files.
2016-04-06 16:40:01 +02:00
João Brázio
e48d0263bf
Bugfix: M32 was still using the old print timer
2016-04-06 04:41:36 +01:00
João Brázio
e8b80d8c20
Implemented M75, M76, M77 to control the print timer
2016-04-06 04:38:42 +01:00
João Brázio
eb61051556
Rework the print job timer to use the stopwatch class
2016-04-06 04:34:03 +01:00
João Brázio
399101fff3
Implemented the stopwatch class and methods
2016-04-06 04:23:45 +01:00
Scott Lahteine
98f2e9fc83
Reduce string storage required for DEBUG_LEVELING
2016-04-05 19:04:42 -07:00
Scott Lahteine
1af5d7b35f
Add more leveling-debug output
2016-04-05 18:31:10 -07:00
Scott Lahteine
d5b19a49f6
Merge pull request #3384 from thinkyhead/rc_adjust_M111_output
...
Final tweaks to M111 output
2016-04-05 16:48:59 -07:00
Scott Lahteine
da2ff4a6d3
Catch a TEMP_SENSOR error before a pins issue
2016-04-05 16:17:28 -07:00
Scott Lahteine
90f6f02aca
Merge pull request #3397 from thinkyhead/rc_menu_issues_fixer
...
Revert #3388 , clean up lcd_move code
2016-04-05 15:45:35 -07:00
Scott Lahteine
fb38d698db
Add feedback after "Click to Begin"
2016-04-05 15:35:05 -07:00
Scott Lahteine
d5f0db26dc
Merge pull request #3390 from jbrazio/docs/update-source-url
...
Update DEFAULT_SOURCE_URL comment
2016-04-05 15:17:07 -07:00
Scott Lahteine
ce58d1d4d5
Merge pull request #3392 from barus93/patch-2
...
Update language_it.h
2016-04-05 15:16:24 -07:00
Scott Lahteine
582b58e660
Add audio feedback to edit items
2016-04-05 14:51:11 -07:00
Scott Lahteine
a70c3ffc21
Minor syntax tweak with encoderPosition
2016-04-05 14:51:11 -07:00
Scott Lahteine
0f247187b8
Drop extra setting of currentMenu
2016-04-05 14:51:11 -07:00
Scott Lahteine
24cde86a4f
Fix syntax highlighting of menu_edit_type lines
2016-04-05 14:51:11 -07:00
Scott Lahteine
86372cd394
Add underscore to internal lcd move function names
2016-04-05 14:51:11 -07:00
Scott Lahteine
aa97328cd3
Use min_pos/max_pos for _lcd_move
2016-04-05 14:51:10 -07:00
Scott Lahteine
f936df9507
Small cleanup of feedrate dead-zone
2016-04-05 14:51:10 -07:00
Scott Lahteine
f5c2fb27cd
Handle defer_return_to_status in lcd_goto_menu
2016-04-05 14:51:10 -07:00
Scott Lahteine
8459f7fa5c
Use ms where possible.
2016-04-05 14:51:10 -07:00
Scott Lahteine
34ce9c4c1c
Restore save previous for menu edit items
2016-04-05 14:26:36 -07:00
Gege2B
03d5c9a482
Merge remote-tracking branch 'upstream/RCBugFix' into RCBugFix
2016-04-05 12:14:15 +02:00
Gege2B
4ea45d5c56
Some omitted french translation
2016-04-05 12:04:29 +02:00
barus93
f43e37bb0c
Update language_it.h
...
New messages translated:
#define MSG_LEVEL_BED_HOMING "Homing XYZ"
#define MSG_LEVEL_BED_WAITING "Click to Begin"
#define MSG_LEVEL_BED_DONE "Leveling Done!"
#define MSG_LEVEL_BED_CANCEL "Cancel"
. . .
#define MSG_HOME_OFFSETS_APPLIED "Offsets applied"
2016-04-05 07:24:07 +02:00
João Brázio
9240682630
Followup #3326 : Update DEFAULT_SOURCE_URL comment
2016-04-05 02:21:23 +01:00
Scott Lahteine
4b8a71055e
Merge pull request #3388 from thinkyhead/rc_fix_move_menu_bug
...
Fix: menu edit items saving position twice
2016-04-04 17:05:15 -07:00
Scott Lahteine
1220dfd5d6
Fix: menu edit items saving position twice
2016-04-04 16:36:04 -07:00
Scott Lahteine
b5920837ea
Merge pull request #3370 from esenapaj/patch-1
...
Drop DISABLE_M(IN|AX)_ENDSTOPS, replace with individual endstop flags
2016-04-04 16:12:50 -07:00
Scott Lahteine
53b397ab14
Merge pull request #3364 from jbrazio/script/find-missing-translations
...
Added a script to check all language files for missing translations
2016-04-04 16:10:36 -07:00
Scott Lahteine
d6fe454a13
Merge pull request #3386 from thinkyhead/rc_spanish_rebase
...
Add Missing Spanish translation
2016-04-04 16:07:34 -07:00
Scott Lahteine
2abea41c41
Merge pull request #3385 from thinkyhead/rc_dutch_translation
...
Update language_nl.h
2016-04-04 16:02:11 -07:00
RicardoGA
1bfaf57ee5
Add Missing Spanish translation
...
Add the missing translation (Spanish) issue #3353
2016-04-04 15:55:59 -07:00
paulusjacobus
4a4b797dca
Update language_nl.h
...
Added these messages with Dutch translation
#define MSG_BED_Z
#define MSG_A_TRAVEL
#define MSG_HEATING_FAILED_LCD
#define MSG_ERR_REDUNDANT_TEMP
#define MSG_THERMAL_RUNAWAY
#define MSG_ERR_MAXTEMP
#define MSG_ERR_MINTEMP
#define MSG_ERR_MAXTEMP_BED
#define MSG_ERR_MINTEMP_BED
#define MSG_HEATING
#define MSG_HEATING_COMPLETE
#define MSG_BED_HEATING
#define MSG_BED_DONE
2016-04-04 15:46:50 -07:00
Scott Lahteine
1ee903f30d
Merge pull request #3376 from gege2b/RCBugFix
...
French translation
2016-04-04 15:40:00 -07:00
Scott Lahteine
c5ff2c7d32
Merge pull request #3377 from clexpert/patch-1
...
Update language_cz.h
2016-04-04 15:39:44 -07:00
Scott Lahteine
99898ea652
Merge pull request #3379 from barus93/patch-2
...
Update language_it.h
2016-04-04 15:39:15 -07:00
Scott Lahteine
56e8e2b0eb
Final tweaks to M111 output
2016-04-04 15:36:07 -07:00
barus93
040a0c49db
Update language_it.h
...
ADD missing translation
2016-04-04 20:22:34 +02:00
Petr Zahradnik
8b843e997a
Update language_cz.h
2016-04-04 17:26:19 +02:00
Petr Zahradnik
3cd2beb750
Update language_cz.h
2016-04-04 16:54:26 +02:00
Gege2B
34bf9530c0
French translation
2016-04-04 16:45:06 +02:00
João Brázio
d819a4aff9
Fixes #3346 , followup #3343 : variables must defined with the static keyword to work with PROGMEM when defined inside functions
2016-04-04 15:02:18 +01:00
esenapaj
1326dc7258
Drop DISABLE_M(IN|AX)_ENDSTOPS, replace with individual endstop flags
...
This is follow-up the commit e5771346a4
2016-04-04 17:49:25 +09:00
Scott Lahteine
0433df3835
Merge pull request #3366 from jbrazio/translate/pt_PT
...
Added missing translations for pt_PT
2016-04-03 21:02:13 -07:00
João Brázio
dff6adfbca
Fixes #3361 : Added missing translations for pt_PT
2016-04-04 04:57:32 +01:00
Scott Lahteine
c0e7257932
Fix bug in new endstop pullups handling
2016-04-03 20:52:32 -07:00
João Brázio
f94900ee79
Added a script to check all language files for missing translations
2016-04-04 04:46:04 +01:00
Scott Lahteine
de39056f68
Merge pull request #3343 from thinkyhead/rc_fix_m111_output
...
Fix M111 output using pgm_read_word, as required
2016-04-03 17:44:38 -07:00
Scott Lahteine
fd0ac371b0
Fix M111 output using pgm_read_word as required
...
As noted by @taratata2016 in https://github.com/MarlinFirmware/Marlin/issues/3300#issuecomment-204687275
2016-04-03 17:33:06 -07:00
esenapaj
c4d7e0307c
Update Japanese translation
2016-04-04 09:11:23 +09:00
Scott Lahteine
c045ec8cb3
Merge pull request #3065 from thinkyhead/rc_doc_tweaks
...
Simplified endstop configuration
2016-04-03 17:05:47 -07:00
Scott Lahteine
d771174797
Merge pull request #3337 from esenapaj/patch-2
...
suppress warnings
2016-04-03 17:01:22 -07:00
Scott Lahteine
f2032cfcf6
Merge pull request #3341 from thinkyhead/rc_english_patch
...
Fix English definition for MSG_LEVEL_BED_CANCEL
2016-04-03 16:58:51 -07:00
Scott Lahteine
09c6f80c1e
Fix MSG_LEVEL_BED_CANCEL english
2016-04-03 16:41:27 -07:00
esenapaj
afe7d26543
Update Japanese translation
2016-04-03 16:39:37 -07:00
Scott Lahteine
3aee89b93a
Merge pull request #3338 from thinkyhead/rc_patches_april_3
...
Add history to LCD Menus, fix up Manual Bed Leveling
2016-04-03 16:37:39 -07:00
Scott Lahteine
7a2f73c6db
Remove extra comma from LCDHandlerAction
2016-04-03 16:27:30 -07:00
Scott Lahteine
3fbf67e5ce
Patch MBL feedback and event handling
2016-04-03 16:27:30 -07:00
Scott Lahteine
ef2fbaec98
Headings for menu sub-items, actions, etc.
2016-04-03 16:27:29 -07:00
Scott Lahteine
dc109ac4e2
Move MBL code to its logical place
2016-04-03 16:27:29 -07:00
Scott Lahteine
6730408ec1
Move lcd_autostart_sd to its logical place
2016-04-03 16:27:29 -07:00
Scott Lahteine
056b80dc53
Have "back" menu items go to the previous item
2016-04-03 16:27:29 -07:00
Scott Lahteine
c94482168b
Add MSG_LEVEL_BED_CANCEL for MBL
2016-04-03 16:27:29 -07:00
Scott Lahteine
877fb1f588
Account for MAX31855 in conditionals
2016-04-03 16:19:17 -07:00
Scott Lahteine
d24f14a799
Add HAS_TEMP_HOTEND define
2016-04-03 16:18:49 -07:00
esenapaj
f9e1a0ee6c
suppress warnings
2016-04-04 06:48:53 +09:00
Scott Lahteine
cf9a171aa9
Merge pull request #3330 from thinkyhead/rc_mbl_lcdDrawUpdate
...
Improvements to MBL, general LCD menu handling
2016-04-02 19:20:23 -07:00
Scott Lahteine
2b01649533
Move default machine info to pins files
2016-04-02 18:53:05 -07:00
Scott Lahteine
4f24323817
Split DEFAULT_MACHINE_NAME from DEFAULT_SOURCE_URL
...
Addressing #3325 – Avoid undefined symbol errors in the compiler.
2016-04-02 18:41:01 -07:00
Scott Lahteine
771ee1c1a9
Update MBL menu sub-function names
2016-04-02 18:20:47 -07:00
Scott Lahteine
d659777e70
Fix MBL to handle re-entrant calls
2016-04-02 18:14:49 -07:00
Scott Lahteine
5719fcba51
Add MSG_LEVEL_BED_DONE and MSG_LEVEL_BED_WAITING
2016-04-02 18:14:49 -07:00
Scott Lahteine
80b8fd1cad
Add MSG_HOME_OFFSETS_APPLIED
2016-04-02 18:14:49 -07:00
Scott Lahteine
d1c45ff80b
More user interaction in MBL
2016-04-02 18:14:49 -07:00
Scott Lahteine
240b71ee1c
Give names to lcdDrawUpdate values
2016-04-02 18:14:48 -07:00
Scott Lahteine
b0a3c7a91c
Add feedback sounds to MBL items
2016-04-02 17:08:43 -07:00
Scott Lahteine
782c598e66
Use ftostr43 with '+' option in MBL Z adjuster
2016-04-02 17:08:43 -07:00
Scott Lahteine
f08b0d034f
Merge pull request #3328 from RicardoGA/RC_Babystepping_fix
...
Babystepping Fix
2016-04-02 16:48:45 -07:00
Scott Lahteine
09437466b1
Merge pull request #3324 from tnw513/fix_filament_dia
...
changed DEFAULT_NOMINAL_FILAMENT_DIA for consistency between example config files
2016-04-02 16:40:24 -07:00
Scott Lahteine
2b4c42610c
Adjust SanityCheck messages
2016-04-02 16:39:23 -07:00
Scott Lahteine
a617d12f70
Account for Z_DUAL_ENDSTOPS in sanity checking of endstops
2016-04-02 16:39:23 -07:00
Scott Lahteine
868eebfdee
Simplify configuration of Z2 endstops
2016-04-02 16:39:23 -07:00
Scott Lahteine
e5771346a4
Drop DISABLE_M(IN|AX)_ENDSTOPS, replace with individual endstop flags
2016-04-02 16:39:23 -07:00
Scott Lahteine
071c742b8a
Move STRINGIFY to macros.h, use in language.h
2016-04-02 16:38:43 -07:00
Scott Lahteine
2ee599d873
Merge pull request #3321 from tnw513/fix_max_endstop
...
Max endstops disabled for stock Prusa i3 Hephestos.
2016-04-02 16:38:10 -07:00
Scott Lahteine
4e1bbdb89f
Merge pull request #3320 from alhirzel/RCBugFix
...
Fix manual Y movement on delta (regression).
2016-04-02 16:37:14 -07:00
Scott Lahteine
5fb88a2754
Merge pull request #3314 from jbrazio/bugfix/followup-3235
...
Fixes missing icons from status screen
2016-04-02 16:36:18 -07:00
Scott Lahteine
3c14c01a3a
Merge pull request #3310 from esenapaj/patch-2
...
Follow-up the commit a393941
2016-04-02 16:35:31 -07:00
RicardoGA
6b1d2263a2
Babystepping Fix
2016-04-02 14:53:57 -06:00
Silvio Didonna
dfe891fe11
changed filament diameter for consistency between all example config files.
2016-04-02 21:05:25 +02:00
Alexander Hirzel
6e0d627c8c
Unbreak the Delta radius clipping
2016-04-02 12:58:39 -04:00
Silvio Didonna
6c528e63eb
max endstops disabled. Stock Prusa i3 Hephestos have min endstops.
2016-04-02 16:54:59 +02:00
Alexander Hirzel
949172606f
Fix manual Y movement on delta (regression).
2016-04-02 10:48:13 -04:00
João Brázio
55a248d6b4
Fixes #3313 : Wrong board def in pins.h
2016-04-02 09:28:58 +01:00
João Brázio
04b2abb6aa
Fixes #3312 : Missing all icons from status screen
2016-04-02 06:50:02 +01:00
esenapaj
81593cb3cb
Follow-up the commit a393941
2016-04-02 11:23:33 +09:00
Scott Lahteine
6a245fe4f7
Release 1.1.0-RC5
2016-04-01 19:14:49 -07:00
Scott Lahteine
e8f8a46ef5
Merge pull request #3303 from thinkyhead/rc_various_fixes
...
Various patches for LCD menu issues
2016-04-01 18:02:25 -07:00
Scott Lahteine
b98f72b483
Small optimization for ftostr43
2016-04-01 17:54:16 -07:00
Scott Lahteine
a393941d2d
Combine "XYZ" with MSG_LEVEL_BED_HOMING
2016-04-01 17:51:03 -07:00
Scott Lahteine
097cc75ba8
Patch _lcd_level_bed draw to fix flicker, show proper offset
2016-04-01 17:51:03 -07:00
Scott Lahteine
1e1a18e091
Remove extra semicolon in ultralcd.cpp
2016-04-01 17:51:03 -07:00
Scott Lahteine
0b4f65dca8
Always limit blink to ~1 second intervals
2016-04-01 17:51:03 -07:00
Scott Lahteine
ffe054c129
Fix comment about host keepalive interval
2016-04-01 17:28:08 -07:00
Scott Lahteine
0d6609c3c5
lcd_goto_menu should set lcdDrawUpdate to 2
2016-04-01 17:07:40 -07:00
Scott Lahteine
af89ccf96a
Use flag to defer lcd return-to-status
2016-04-01 17:07:39 -07:00
Scott Lahteine
641b30217e
Patch prevEncoderPosition compile issue
...
Thanks to @jbrazio #3301
2016-04-01 17:07:39 -07:00
Scott Lahteine
41aa4bdf1f
Use XYZ translated strings in dogm
2016-04-01 17:07:39 -07:00
Scott Lahteine
92882fcc51
Allow lcd_implementation_drawedit to draw a message
2016-04-01 17:04:33 -07:00
Scott Lahteine
0114cf1101
RCBugFix version string
2016-04-01 17:04:33 -07:00
Scott Lahteine
9c43369ebb
Merge pull request #3306 from thinkyhead/rc_fix_num2str
...
Clean up num2str functions, extend ftostr43
2016-04-01 17:04:03 -07:00
Scott Lahteine
1da9d10173
Support for MKS v1.3/1.4 and Sainsmart RAMPS 1.4 variants
2016-04-01 16:54:35 -07:00
Scott Lahteine
fcedfd6e99
Clean up num2str functions, extend ftostr43
2016-04-01 16:52:59 -07:00
Scott Lahteine
2512d8fd5e
Merge pull request #3304 from thinkyhead/rc_slow_buttons
...
Macros for buttons, some cleanup for slow buttons
2016-04-01 15:31:54 -07:00
Scott Lahteine
f543aaa54e
Apply standard pin test to buttons
...
This is the easiest way to make button pin testing consistent without
renaming all the button pins. Just make a macro especially for testing
if button pins are set, since they are named consistently in the pins
files.
2016-04-01 15:12:12 -07:00
Scott Lahteine
f2ffc8b28b
Rename local slow_buttons for clarity
2016-04-01 15:06:33 -07:00
Scott Lahteine
26279fa43c
Merge pull request #3289 from esenapaj/patch-1
...
Update Kana font
2016-04-01 14:31:32 -07:00
Scott Lahteine
0bee67e5f1
Merge pull request #3294 from jbrazio/bugfix/mandatory-extrude-mintemp
...
Fix an error when EXTRUDE_MINTEMP is not defined
2016-04-01 14:23:32 -07:00
João Brázio
709dd5aa4d
Fix an error when EXTRUDE_MINTEMP is not defined
2016-03-31 16:25:48 +01:00
Scott Lahteine
bc86ee0271
Simplify homeaxis with some macros
2016-03-30 18:44:05 -07:00
esenapaj
cc5059478a
Update Kana font
2016-03-31 10:02:47 +09:00
Scott Lahteine
82ef101ed5
Deploy & Stow in G29 for Delta + Z Servo Endstop
2016-03-30 16:41:16 -07:00
Scott Lahteine
33a9d32800
Merge pull request #3285 from thinkyhead/rc_fix_drawedit
...
Fix string issues in ultralcd.cpp
2016-03-30 13:01:07 -07:00
Scott Lahteine
6a4d394fff
Fix pointer-to-string issues with set_home_offsets and _lcd_level_bed_homing
2016-03-30 12:32:25 -07:00
Scott Lahteine
de333c4fea
Merge pull request #3279 from thinkyhead/rc_filament_width_sensor
...
FILAMENT_SENSOR -> FILAMENT_WIDTH_SENSOR
2016-03-30 12:16:27 -07:00
Scott Lahteine
0f835c0c4e
Merge pull request #3259 from jbrazio/bugfix/old-ide-warning
...
Show a warning message when Arduino IDE is prior to 1.5
2016-03-30 12:15:51 -07:00
Scott Lahteine
8def2c31db
Merge pull request #3284 from thinkyhead/rc_stop_watchheat_lcdset0
...
Fix temperature checking conditions (backwards!)
2016-03-30 12:10:39 -07:00
Scott Lahteine
b919a6f182
Merge pull request #3280 from esenapaj/patch-1
...
Update U8glib URL
2016-03-30 12:06:53 -07:00
Scott Lahteine
8bf5f7c676
Merge pull request #3282 from jbrazio/bugfix/m104-timer-wont-start
...
M104 not starting the print timer
2016-03-30 11:54:16 -07:00
Scott Lahteine
31450ad498
Fix temperature checking conditions (backwards!)
2016-03-30 11:52:03 -07:00
João Brázio
187c183c20
M104 was not starting the print timer
2016-03-30 11:33:24 +01:00
esenapaj
352294b5f5
Update U8glib URL
2016-03-30 14:26:28 +09:00
Scott Lahteine
507aef055f
Patch broken M404
2016-03-29 20:54:31 -07:00
Scott Lahteine
1a79b13b7a
FILAMENT_SENSOR -> FILAMENT_WIDTH_SENSOR
2016-03-29 20:54:31 -07:00
Scott Lahteine
7f81aa7ff3
Pins should always be defined (even for disabled features)
2016-03-29 20:44:14 -07:00
Scott Lahteine
5f32184254
Merge pull request #3278 from thinkyhead/rc_cleanup_m111_redo
...
Echo all debug levels in M111, default to DEBUG_NONE
2016-03-29 20:34:31 -07:00
Scott Lahteine
05765fb570
Add DEBUGGING macro
2016-03-29 19:50:01 -07:00
Scott Lahteine
4402760739
Echo all debug levels in M111, default to DEBUG_NONE
...
Redo of #3268 by @jbrazio
2016-03-29 19:18:45 -07:00
Scott Lahteine
f0b96f5cae
Merge pull request #3276 from thinkyhead/rc_sdprint_and_lcd_sleuth
...
Refinements, fixes, reduced stack usage in CardReader
2016-03-29 18:30:18 -07:00
Scott Lahteine
12c0bf9521
Merge pull request #3277 from jbrazio/bugfix/m190-temp-never-reached
...
M190 bed temp is never reached
2016-03-29 18:28:51 -07:00
João Brázio
c6577aea60
M190 bed temp was never reached
2016-03-30 01:03:20 +01:00
Scott Lahteine
ce0a9d3dc6
A picky fix of indentation in cardreader.cpp
2016-03-29 16:23:12 -07:00
Scott Lahteine
4ed8351e3d
Revert use of enqueue_and_echo_command_now
2016-03-29 16:23:12 -07:00
Scott Lahteine
70d1d4de5f
Small code spacing adjustments
2016-03-29 03:19:27 -07:00
Scott Lahteine
0385acea7a
Fix workDirParents -> getAbsFilename relationship
2016-03-29 03:18:53 -07:00
Scott Lahteine
27d70599d4
Change openFile default to "not-push" instead of "do-replace"
2016-03-29 03:16:35 -07:00
Scott Lahteine
372f93cc7a
Rename "filenames" to "proc_filenames"
2016-03-29 03:15:01 -07:00
Scott Lahteine
6b01cf07c2
Use only as much stack as needed for the M23 command
2016-03-29 02:34:33 -07:00
Scott Lahteine
9e520ae319
Merge pull request #3272 from thinkyhead/rc_filament_sensor_scope
...
Minor cleanup to filament sensor code
2016-03-28 20:51:46 -07:00
Scott Lahteine
3252df7998
Minor cleanup to filament sensor code
2016-03-28 20:04:34 -07:00
Scott Lahteine
b60ea95adf
Keep blinking limited to LCD_UPDATE_INTERVAL
2016-03-28 19:41:13 -07:00
Scott Lahteine
e0ab06cfae
Merge pull request #3267 from thinkyhead/rc_command_args_null_oooops
...
Cleanup, simplification of command dispatcher code
2016-03-28 18:54:00 -07:00
Scott Lahteine
0b8ef5eba6
Split get_command into units, rename to get_available_commands
2016-03-28 06:00:04 -07:00
Scott Lahteine
545f7997ea
Continue on empty lines instead of returning
2016-03-28 05:37:36 -07:00
Scott Lahteine
3dcf6d42ff
Don't store escaped serial characters if comment_mode
2016-03-28 05:37:36 -07:00
Scott Lahteine
5f8e52aefb
Minor cleanup to command dispatcher
2016-03-28 05:37:36 -07:00
jbrazio
0880fecbd4
Show a warning message when Arduino IDE is prior to 1.5
2016-03-28 11:55:42 +01:00
Scott Lahteine
f1ed310322
Add NUMERIC compare macros to simplify code
2016-03-28 03:52:49 -07:00
Scott Lahteine
3b2d159abd
Relax the test for "Heating failed" errors
2016-03-27 07:02:10 -07:00
Scott Lahteine
2e4ddd5c22
Merge pull request #3260 from jbrazio/cleanup/standardize-comment-style
...
Formatted multi-line comments
2016-03-26 21:42:33 -07:00
jbrazio
443e6d26fe
Formatted multi-line comments
2016-03-27 04:36:36 +01:00
esenapaj
7950b5268a
Use SBI macro
2016-03-26 20:17:52 +09:00
Scott Lahteine
e4039a9b5b
Merge pull request #3250 from esenapaj/patch-1
...
Fix typo
2016-03-26 00:41:31 -07:00
Scott Lahteine
1d987cd280
Merge pull request #3253 from thinkyhead/rc_autotune_menu_optional
...
Make the Autotune option(s) in the LCD menu optional
2016-03-26 00:32:05 -07:00
Scott Lahteine
d6f92f9efe
Remove Tonokip remnant from recent PR
2016-03-25 23:50:29 -07:00
Scott Lahteine
ab412a2153
PIDTEMPBED on #endif
2016-03-25 23:50:28 -07:00
Scott Lahteine
53cc6cca46
Formalize some dependencies on PIDTEMPBED
2016-03-25 23:50:28 -07:00
Scott Lahteine
5955a3063f
Sanity check PIDTEMPBED plus BED_LIMIT_SWITCHING
2016-03-25 23:50:28 -07:00
Scott Lahteine
67fabb6044
Merge pull request #3252 from thinkyhead/rc_keepalive_less
...
Host Keepalive: Reduce frequency of "busy" messages
2016-03-25 23:37:02 -07:00
Scott Lahteine
d1bdd25b84
Merge pull request #3249 from esenapaj/patch-2
...
Update Japanese translation
2016-03-25 22:53:00 -07:00
Scott Lahteine
0d554c10ac
Merge pull request #3244 from ch100/RCBugFix
...
Fixed backlight for PCF8575.
2016-03-25 22:50:20 -07:00
Scott Lahteine
cd4c3e90bc
Send a busy signal every 10 seconds instead of every 2
2016-03-25 22:15:40 -07:00
Scott Lahteine
8cb04816b5
Apply PID_AUTOTUNE_MENU option to ultralcd.cpp
2016-03-25 19:31:56 -07:00
Scott Lahteine
4b31c67dce
Add PID_AUTOTUNE_MENU option
2016-03-25 19:31:56 -07:00
Scott Lahteine
e08915a723
Fix comments in Configuration_adv.h
2016-03-25 19:31:31 -07:00
Scott Lahteine
26168676e7
Merge pull request #3246 from thinkyhead/rc_fix_numeric_filenames
...
Fix: current_command_args skips digits at the front
2016-03-25 16:38:36 -07:00
esenapaj
f54315c728
Fix typo
...
These are salvaged from closed-PR #3216 .
2016-03-26 08:37:17 +09:00
esenapaj
37a0806420
Update Japanese trasration
...
Follow the PR #3242 .
2016-03-26 08:21:17 +09:00
Scott Lahteine
f423716c6a
Fix: current_command_args skips digits at the front
...
Closes #3245
2016-03-25 16:12:41 -07:00
Christian Inci
627f39e1e3
Fixed backlight for PCF8575.
...
Fixed backlight for PCF8575.
Signed-off-by: Christian Inci <chris.pcguy.inci@gmail.com>
2016-03-25 14:49:55 +01:00
Scott Lahteine
fc0baec991
Merge pull request #3240 from esenapaj/patch-1
...
Fix distribution date
2016-03-25 06:49:42 -07:00
Scott Lahteine
18de9f55ac
Merge pull request #3242 from thinkyhead/rc_epatel_mesh_fixes
...
Updated Mesh Bed Leveling
2016-03-25 06:48:12 -07:00
Scott Lahteine
3a1e6b1752
Merge pull request #3243 from AnHardt/homed
...
axis_known_position -> axis_homed
2016-03-25 06:36:46 -07:00
AnHardt
94962ee678
axis_known_position -> axis_homed
...
In all these cases we want the axis to be homed. If we could have lost
some steps is secondary.
Reenables homing seperate axis with DISABLE_X / DISABLE_Y true.
2016-03-25 14:05:20 +01:00
Edward Patel
14afe1a017
Move to Z=0 for G28 when using Manual Bed Leveling
...
copy of 406992f9dd
2016-03-25 04:58:44 -07:00
Edward Patel
c606ed447a
Add "G29 S4" to fine tune Z level for Mesh Bed Leveling.
...
Also add mbl.z_offset to the EEPROM, bumping the version to V23.
2016-03-25 04:58:43 -07:00
Scott Lahteine
5d8036e554
Code cleanup around MOTOR_CURRENT_PWM options
2016-03-25 04:23:46 -07:00
esenapaj
bec112de87
Fix distribution date
2016-03-25 18:56:16 +09:00
Scott Lahteine
f394c0639e
Merge pull request #3230 from jbrazio/bugfix/ultra-lcd-warning
...
Fix a compiler warning in ultralcd.cpp
2016-03-25 01:14:54 -07:00
João Brázio
f077c7abbf
Fix dogm lcd error when FAN_PIN is defined as -1
2016-03-25 01:09:09 -07:00
Scott Lahteine
0da744b7b0
Further cleanup of comments, partial Doxygen-style
...
Following up on #3231
2016-03-25 00:45:56 -07:00
Scott Lahteine
4823791eb0
Merge pull request #3228 from esenapaj/patch-1
...
Fix spelling
2016-03-25 00:40:51 -07:00
jbrazio
80f221ed11
Fixed: warning: extra tokens at end of #endif directive
2016-03-24 19:33:25 +00:00
jbrazio
5e5d250832
Added gplv3 header to all Marlin files
2016-03-24 18:01:20 +00:00
esenapaj
89a845659a
Fix spelling
...
PROBABLE ->PROBEABLE
This is follow-up to #3069 ?
2016-03-25 02:13:37 +09:00
Scott Lahteine
a6e39c1005
Release 1.1.0-RC4
2016-03-24 05:32:33 -07:00
Scott Lahteine
42ec1f39e7
Merge pull request #3207 from jbrazio/bugfix/toshiba-sdhc-flashair
...
Toshiba Flash Air Wifi SD card support
2016-03-24 05:28:48 -07:00
Scott Lahteine
b6ca86b974
Merge pull request #3197 from PheiPheiPhei/RCBugFix
...
Enabling servo usage on boards with PWM current control
2016-03-24 05:27:57 -07:00
Scott Lahteine
a6805ddf30
Merge pull request #3225 from yarda/fix-melzi-makr3d
...
Fix MELZI_MAKR3D to use correct motherboard
2016-03-24 05:24:57 -07:00
Scott Lahteine
af32a7d5d6
M120/M121 also set endstops non-homing state
2016-03-24 03:24:23 -07:00
Scott Lahteine
04fa9d4f47
Make Autotune options into Menu Edit Items
2016-03-24 02:00:08 -07:00
WPBack
e3f583a3be
Fixes for PID AutoTune from menu
...
Fixes for #3189
Setting a temp is still missing
2016-03-24 01:47:30 -07:00
WPBack
3b3e8a02b5
Initial implementation of PID Autotune Menu Items
...
Adds the parameter U to M303. If U1 is included , it will use the
PID-values from the auto-tune.
2016-03-24 01:46:37 -07:00
Scott Lahteine
da9d4c4caf
Merge pull request #3206 from esenapaj/patch-5
...
Follow-up the PR #3082 , etc
2016-03-24 00:20:25 -07:00
Scott Lahteine
c5857f96c8
Merge pull request #3182 from thinkyhead/rcbugfix_printrboard_revf
...
Add support for Printrboard RevF
2016-03-24 00:12:06 -07:00
Scott Lahteine
f774420488
Merge pull request #3196 from thinkyhead/rc_controllerfan_bug
...
Make DISABLE_INACTIVE_X, etc., true if missing
2016-03-24 00:11:46 -07:00
Scott Lahteine
7d55d86081
Merge pull request #3219 from AnHardt/RH-pos-update
...
Send position updates to RH
2016-03-23 23:20:24 -07:00
Scott Lahteine
7ea4e095ad
Merge pull request #3220 from thinkyhead/rc_tori_spelling
...
Patch minor spelling error in cn, en, gl language file headings
2016-03-23 22:43:11 -07:00
Scott Lahteine
bcbac698f2
Patch minor spelling issue in cn, en, gl language file headings
2016-03-23 22:30:07 -07:00
Scott Lahteine
49ed4696ea
Merge pull request #3218 from AnHardt/lost-pin-undef
...
Fix lost undef Y_MAX_PIN in pins.h
2016-03-23 21:37:51 -07:00
Scott Lahteine
7112f2e41a
Merge pull request #3204 from esenapaj/patch-3
...
Change link to the document
2016-03-23 20:56:52 -07:00
AnHardt
1c6a16d5bb
Send position updates to RH
...
Send position updates to RH where RH can not know the end position.
For example after G28 RepetierHost assumes to be at the homing-point,
but with a servo probe we are much higher. Now the RH-software-endstops
will prevent us from going down (if activated). With this patch the
internal position of RH is updated with `current_position[]`.
2016-03-23 13:30:50 +01:00
AnHardt
1b336971ae
Fix lost undef Y_MAX_PIN in pins.h
2016-03-23 12:48:06 +01:00
AnHardt
ba4eebad2f
Fix Fan KICKSTART
...
Sorting ot what else belongs to what if was not so hard.
But the static `ms = ms = millis();` was a bit surpising.
2016-03-23 12:08:02 +01:00
Scott Lahteine
cbce025248
Merge pull request #3217 from thinkyhead/rc_updated_kana
...
Patch-up to commits for Kana #3203 .
Closes #3203 .
2016-03-23 02:46:26 -07:00
esenapaj
665338bb69
Update Japanese translation
2016-03-23 02:43:53 -07:00
AnHardt
6486e8b74a
Call buzz() directly from M428
2016-03-22 15:05:04 +01:00
jbrazio
757661b299
Toshiba Flash Air Wifi SD card support
2016-03-22 11:42:11 +00:00
esenapaj
fc75e6f92d
Follow-up the PR #3082 , etc
...
Follow-up the PR #3082
Follow-up the commit 143ad74b0f5ba0
2016-03-22 20:22:01 +09:00
esenapaj
22299c13c1
Change link to the document
...
documentation/LCDLanguageFont.md moved to http://www.marlinfirmware.org/ at commit 12d0983757http://www.marlinfirmware.org/ isn't working.
2016-03-22 19:58:41 +09:00
PheiPheiPhei
adb5375a09
Enabling servo usage on boards with PWM current control
...
Enabling servo usage on boards with PWM current control
timer5 is used by some boards like the Mini Rambo for controlling motor current via PWM, see stepper.cpp.
```cpp
#ifdef MOTOR_CURRENT_PWM_XY_PIN
pinMode(MOTOR_CURRENT_PWM_XY_PIN, OUTPUT);
pinMode(MOTOR_CURRENT_PWM_Z_PIN, OUTPUT);
pinMode(MOTOR_CURRENT_PWM_E_PIN, OUTPUT);
digipot_current(0, motor_current_setting[0]);
digipot_current(1, motor_current_setting[1]);
digipot_current(2, motor_current_setting[2]);
//Set timer5 to 31khz so the PWM of the motor power is as constant as possible. (removes a buzzing noise)
TCCR5B = (TCCR5B & ~(_BV(CS50) | _BV(CS51) | _BV(CS52))) | _BV(CS50);
#endif
}
```
Using the same timer for controlling servos results in loss of motor control. So use timer4/3 for those boards instead.
[See discussion here.](http://shop.prusa3d.com/forum/software-f13/enabling-auto-leveling-in-firmware-t416-s40.html )
2016-03-22 00:56:31 +01:00
jbrazio
04e57e2b5e
Update the Hephestos 2 default config
2016-03-21 18:20:29 +00:00
esenapaj
f260e00a72
fix spelling
...
Thermister -> Thermistor
2016-03-21 20:57:03 +09:00
Scott Lahteine
b1a3a95ad4
Tweak controllerFan to save a cycle or two
2016-03-20 22:11:09 -07:00
Scott Lahteine
04a6924633
Make DISABLE_INACTIVE_X, etc., the same as DISABLE_X (etc.) if missing
2016-03-20 22:10:52 -07:00
Scott Lahteine
15fccd43ee
Fix spacing of an #endif
2016-03-20 20:32:55 -07:00
Scott Lahteine
be08eb6153
Merge pull request #3194 from jbrazio/feature/add-pt_pt-utf8
...
Add pt_pt-utf8 language pack and fix some minor compiler warnings
2016-03-20 17:42:45 -07:00
Scott Lahteine
d1ff7959b7
Merge pull request #3188 from esenapaj/patch-1
...
follow-up the commit b82d91e
2016-03-20 17:39:52 -07:00
Scott Lahteine
10caee2b7c
Merge pull request #3187 from AnHardt/target_extruder_number
...
Fix extrudernum in MSG_INVALID_EXTRUDER
2016-03-20 17:15:22 -07:00
Scott Lahteine
1cc316f1fd
Merge pull request #3082 from thinkyhead/updated_2820
...
This is quite comprehensive. If probes are disabled in any case when they shouldn't be, I'm sure we will hear about it soon.
2016-03-20 17:10:38 -07:00
Scott Lahteine
7bf5d117e7
Merge pull request #3069 from thinkyhead/rc_delta_compat_m48
...
Delta-compatible extensions to M48
2016-03-20 17:09:18 -07:00
Scott Lahteine
db8ab50c66
Merge pull request #3192 from tnw513/fix_lang
...
Added missing translations.
2016-03-20 17:07:00 -07:00
Scott Lahteine
06332f20be
Merge pull request #3113 from jbrazio/bugfix/3061-stop-print-time-counter
...
Stop print timer with M105/M109
2016-03-20 17:05:07 -07:00
jbrazio
92a7d4515a
Missing coma comment correction for the default cofig file
2016-03-20 23:23:11 +00:00
jbrazio
1aa531a3db
Missing coma comment correction for all config files
2016-03-20 23:21:45 +00:00
jbrazio
68dda08fff
Added pt_pt-utf8 language pack; Fixed some minor compiler warnings; Harmonize file suffix for the current existing UTF8 language packs; Updated all configuration files to reflect the new language packs
2016-03-20 23:14:24 +00:00
Silvio Didonna
f8c10d6b0e
Added missing translations.
2016-03-20 22:34:00 +01:00
esenapaj
468df96b0f
follow-up the commit b82d91e
...
follow-up the commit b82d91eca6
2016-03-20 20:57:14 +09:00
AnHardt
338b69c24b
Fix extrudernum in MSG_INVALID_EXTRUDER
...
SERIAL_ECHO is not very good in printing uint8_t - so cast. to int.
2016-03-20 11:39:06 +01:00
AnHardt
b39b54031b
Fix KEEPALIVE_STATE
...
Add return to NOT_BUSY for M105
Replace WAIT_FOR_USER with PAUSED_FOR_USER
Add Travis test for FILAMENTCHANGEENABLE
2016-03-20 10:41:56 +01:00
Scott Lahteine
32f75749e4
Merge pull request #3117 from Blue-Marlin/thermal-protection
...
Improve the descriptions for THERMAL_PROTECTION
2016-03-19 23:41:05 -07:00
esenapaj
37eaa1406b
follow-up the PR #3180
2016-03-20 15:33:02 +09:00
esenapaj
198d5d56fd
follow-up the PR #3183
2016-03-20 13:58:05 +09:00
Scott Lahteine
4119cef32f
Merge pull request #3180 from clexpert/RCBugFix
...
Czech language specific changes
2016-03-19 20:18:05 -07:00
Scott Lahteine
da94bcfebb
Merge pull request #3184 from thinkyhead/fix_command_injection
...
Patch drain_queued_commands_P
2016-03-19 20:12:16 -07:00
Scott Lahteine
41145e6e81
Patch drain_queued_commands_P
...
Fix a SNAFU that should have been caught in #3012
2016-03-19 20:10:41 -07:00
Scott Lahteine
3ce0c5063f
Merge pull request #3183 from thinkyhead/rc_lcm1602_support
...
Also closes #3181 .
2016-03-19 19:28:50 -07:00
CoderSquirrel
eda95d8bed
Add support for LCM1602 16x2 I2C LCD adapter
2016-03-19 19:26:44 -07:00
Scott Lahteine
59483221d5
Move stepper DAC to a separate file
2016-03-19 19:24:26 -07:00
Scott Lahteine
5d0570cea0
Make digitalPotWrite depend on HAS_DIGIPOTSS
2016-03-19 19:24:26 -07:00
Scott Lahteine
f96bc03081
Add M907-M910 g-codes support for Printrbot Rev. F
2016-03-19 19:24:26 -07:00
Stephanie
6843b78f99
Add support for Printrboard RevF
...
The PrintrBoard Rev F utilizes a mcp4728 DAC to set motor current. Printrbot's implementation utilizes 2 new M-codes to set and write the DAC settings to the DAC EEPROM: `M909` (Read DAC) and `M910` (Write DAC). `M907` is re-used to set value, `M908` for direct control.
The Pins file for the RevF board is included.
2016-03-19 16:43:37 -07:00
Petr Zahradnik
98392782ea
Update Configuration.h
2016-03-19 20:45:13 +01:00
Petr Zahradnik
daa52124b0
Update language_cz.h
2016-03-19 20:43:28 +01:00
Blue-Marlin
3166aed087
Improve the descriptions for THERMAL_PROTECTION
2016-03-19 14:08:59 +01:00
Scott Lahteine
a02ae36ae8
Include M65 "ABC" parameters in EEPROM
...
Addressing #2773
2016-03-19 05:52:20 -07:00
Scott Lahteine
cf7c444aff
Apply unknown_position_error elsewhere
2016-03-19 05:13:40 -07:00
Scott Lahteine
eda5190581
Check for known position in M48
2016-03-19 05:13:40 -07:00
Scott Lahteine
68085ca855
Updated M48 friendly for DELTA
...
Partial implementation with reference to MarlinFirmware/Marlin#3011
2016-03-19 05:13:40 -07:00
Scott Lahteine
6a3529247f
"Homing" as a translatable string
2016-03-19 04:41:03 -07:00
Scott Lahteine
c97c2dcaf7
Use const parameters instead of static casting
...
Alternative fix to #3149
2016-03-19 03:36:53 -07:00
Scott Lahteine
38b0082bf2
Additional tweaks to M42 exit conditions
2016-03-19 03:10:18 -07:00
Scott Lahteine
4bbea5124d
Support for multiple PWM fans
2016-03-19 03:10:18 -07:00
Scott Lahteine
637cc03686
Fix M109 so it won't wait for cooling
...
Addressing issue #2767
2016-03-19 03:00:58 -07:00
AnHardt
3f45a1acf9
Check probes only when deployed
...
Aim: Test probes in update_endstops only when activated
Changes:
Configurations
Add define for FIX_MOUNTED_PROBE to handle the situation where formerly ENDSTOPS_ONLY_FOR_HOMING had to be set, or lowering the nozzle below Z_PROBE_OFFSET_FROM_EXTRUDER could give an "endstop hit" message.
Add define for Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN to indicate a common situation, that we have a probe but it is connected to an endstop pin
Add some comments
Shift some entries to have related things together.
Conditionals.h
We have a probe (HAS_Z_MIN_PROBE) if one of the pins is defined AND one of the probes is defined.
SanityCheck.h
Add some tests if the probe is connected and if we have defined a probe.
stepper.cpp
Changes to test the probe only when it is deployed (z_probe_is_active).
Test update_endstops() when the probe is deployed.
MarlinMain.cpp
a. set and reset z_probe_is_active in deploy_z_probe(), stow_z_probe() and dock_sled()
b. set and reset z_probe_is_active in the case a z-servo is moved to a defined position. The only remaining unhandled servo move is in M280 where we do not end in a defined position. If you want to handle a probe use M401/402
c. skip deploying/stowing when already deployed/stowed in the dedicated deploy/stow functions.
d. Handle the new FIX_MOUNTED_PROBE in parallel to a servo driven probe/endstop.
To do: In another PR. handle all probes in deploy/stow_z_probe.
Sort out SERVO_LEVELING vs. HAS_SERVO_ENDSTOPS.
2016-03-19 02:00:08 -07:00
Scott Lahteine
4634feaeab
Merge pull request #3012 from thinkyhead/fix_command_injection
...
Use a serial line buffer to prevent queue corruption
2016-03-19 01:43:54 -07:00
Scott Lahteine
9bf87aac6a
Merge pull request #3127 from thinkyhead/rc_core_babystepping
...
Implement BABYSTEPPING for COREXY and COREXZ
2016-03-18 23:25:26 -07:00
Scott Lahteine
4ae03df5c2
Merge pull request #3109 from thinkyhead/rc_host_keepalive
...
Provide feedback to hosts when busy
2016-03-18 23:22:29 -07:00
Scott Lahteine
963a92ceda
Patch idle forevermore
2016-03-18 22:38:35 -07:00
Scott Lahteine
7ec7bb31c4
Send a Busy signal to hosts during long processes, wait for input, etc
...
If Marlin is blocking the serial input or command queue for any length
of time (for example more than 2 seconds), it needs to send a message
to serial out to inform the host that it is busy. Marlin should only
send these messages out when busy, and preferably not when trying to
print formatted output.
2016-03-18 22:38:35 -07:00
esenapaj
8d580ea7e8
follow-up the PR #3114
...
follow-up the commit d56c6af24e
2016-03-19 13:17:34 +09:00
Scott Lahteine
d9e1f22682
BABYSTEPPING requires ULTRA_LCD
2016-03-18 18:22:53 -07:00
Scott Lahteine
e5fd43f343
Implement BABYSTEPPING for COREXY and COREXZ
2016-03-18 18:22:53 -07:00
Scott Lahteine
80277cc9c8
drain_queued_commands_P now returns true if there are more
2016-03-18 17:56:48 -07:00
Scott Lahteine
8fe7420310
Use a separate serial line buffer
2016-03-18 16:46:20 -07:00
Scott Lahteine
7d25c107a8
Merge pull request #3149 from esenapaj/patch-1
...
suppress warnings
2016-03-18 15:40:14 -07:00
Scott Lahteine
d56c6af24e
Merge pull request #3114 from thinkyhead/rc_reverse_lcd_menu
...
Option to reverse the click-wheel direction in menus
2016-03-18 15:39:29 -07:00
Scott Lahteine
cc291aeb3c
Move definition of "blink" to main ultralcd file
2016-03-17 18:19:05 -07:00
Scott Lahteine
e7e1866589
Merge pull request #3161 from Alex9779/fix_InitialExtruderDirection
...
Fix initial extruder direction for second/third/fourth extruder if they run inverted to the first
2016-03-16 12:58:10 -07:00
Scott Lahteine
57e82cacc9
Merge pull request #3156 from esenapaj/patch-3
...
Fix CardReader::lsDive()
2016-03-16 12:48:22 -07:00
Alexander Leisentritt
4338813814
save last extruder and set stepper directions too in case the extruder changed
...
fixes MarlinFirmware/Marlin#3144 and MarlinFirmware/Marlin#3083
2016-03-16 20:20:34 +01:00
Scott Lahteine
8f24475e02
Simplify limiting encoderLine in END_MENU
2016-03-16 04:05:41 -07:00
Scott Lahteine
fbef2f5b61
Implement reverse menu direction in ultralcd.cpp
2016-03-16 04:03:49 -07:00
Scott Lahteine
b8b51d8da8
Add the REVERSE_MENU_DIRECTION option
2016-03-16 04:02:40 -07:00
Scott Lahteine
999a76dbdf
Merge pull request #3157 from esenapaj/patch-4
...
Use variable in lcd_erase_line()
2016-03-16 02:46:42 -07:00
Scott Lahteine
e8fa843c2d
Merge pull request #3164 from epatel/epatel/RCBugFix
...
Fix for #3160 MESH_BED_LEVELING broke correct G1 movement in Z
2016-03-16 02:40:54 -07:00
Scott Lahteine
fc04b587cf
Merge pull request #3147 from thinkyhead/rc_stringify_macro
...
Promote STRINGIFY to macros.h
2016-03-15 17:37:03 -07:00
Scott Lahteine
d7c6fd5c2f
Merge pull request #3146 from thinkyhead/rc_enabled_true_false
...
Support "true" and "false" in the ENABLED macro
2016-03-15 17:35:55 -07:00
Edward Patel
cb0dbfa3b5
Fix for #3160 MESH_BED_LEVELING broke correct G1 movement in Z
2016-03-16 01:26:00 +01:00
esenapaj
a15c5d222a
Use variable in lcd_erase_line()
...
lcd_erase_line() is called with argument, but the argument is ignored by lcd_erase_line().
2016-03-16 02:59:06 +09:00
esenapaj
609c0d46d9
Fix CardReader::lsDive()
...
If comparison between signed char(-128 ~ +127) and DIR_NAME_DELETED(uint8_t const 0XE5, it's +229),
it makes incorrect result.
2016-03-16 02:47:58 +09:00
Scott Lahteine
2ef49a9d53
Wrap DEFAULT_Ki, DEFAULT_Kd, PID_dT
...
Addition to #3140
2016-03-15 03:49:44 -07:00
Scott Lahteine
eb8cf29464
Merge pull request #3151 from hydrocat/RCBugFix
...
Uptades the pt-br translation
2016-03-15 02:46:46 -07:00
Scott Lahteine
6e1bc03d3b
Additional wrapping for #3140
2016-03-15 01:18:58 -07:00
Scott Lahteine
cc9968f893
Patch spacing in #3140
2016-03-15 01:18:58 -07:00
Scott Lahteine
1c384930f3
Merge pull request #3140 from thinkyhead/rc_fix_macro_expansion
...
Wrap macros to prevent bad expansions
2016-03-15 00:25:34 -07:00
VITORIO MIGUEL PRIETO CILIA
de2cca73ac
Uptades the pt-br translation
2016-03-14 21:16:57 -03:00
esenapaj
a4314c4907
Use local variable in recalc_delta_settings()
...
diagonal_rod hadn't been used anywhere.
2016-03-15 06:47:27 +09:00
esenapaj
8de7a6f9b1
suppress warnings
2016-03-15 06:34:02 +09:00
Scott Lahteine
9418b4f2f3
Promote STRINGIFY to macros.h
2016-03-13 23:15:17 -07:00
Scott Lahteine
4b648793f2
Use ENABLED with DISABLE_[INACTIVE_][XYZ]
2016-03-13 22:15:45 -07:00
Scott Lahteine
73a59a4e45
Allow ENABLED(b) to work with "true" and "false"
2016-03-13 22:15:01 -07:00
Blue-Marlin
c73f1b2471
Extend stack_overflow_protection for lcd_move_e and _lcd_level_bed
...
Extend stack_overflow_protection for lcd_move_e() and _lcd_level_bed() with
a refined method of 3050.
2016-03-13 13:59:44 +01:00
Scott Lahteine
f4a3efd35e
Merge pull request #3116 from thinkyhead/rc_fix_value_edit_bug
...
Fix value edit click bug
2016-03-13 04:08:43 -07:00
Scott Lahteine
3f5fbbd398
Merge pull request #3124 from jbrazio/bugfix/update-g29-auto-level-bed-topography
...
Update the bed topography output done by G29
2016-03-13 03:51:43 -07:00
Scott Lahteine
c16c47954c
Merge pull request #3141 from esenapaj2/RCBugFix
...
follow-up the PR #3131
2016-03-13 03:37:39 -07:00
Scott Lahteine
30c3a21d1f
Merge pull request #3112 from thinkyhead/rc_support_MAX31855
2016-03-13 03:30:48 -07:00
Scott Lahteine
81d759efb6
Merge pull request #3138 from jbrazio/bugfix/m109-r-could-wait-forever
2016-03-13 03:26:34 -07:00
Scott Lahteine
2179f598bf
Merge pull request #3122 from thinkyhead/rc_group_filament_change
2016-03-13 03:25:38 -07:00
Scott Lahteine
62a9b9902d
Merge pull request #3133 from thinkyhead/rc_machine_uuid_in_m115
2016-03-13 03:23:54 -07:00
Scott Lahteine
f928894c38
Merge pull request #3132 from thinkyhead/rc_heating_failed_err
2016-03-13 03:23:14 -07:00
esenapaj2
236a44c83b
follow-up the PR #3131
...
follow-up the commit 7326d63ce0
2016-03-13 19:12:39 +09:00
Scott Lahteine
f9ded2a7c4
Wrap macros to prevent bad expansions
2016-03-12 22:38:55 -08:00
jbrazio
a645860431
All print timer related activity now uses print_job_start(), print_job_timer() or print_job_stop()
2016-03-12 07:16:39 +00:00
jbrazio
1981e53d68
M109 R option if misused could cause a wait-forever situation
2016-03-12 06:24:24 +00:00
Scott Lahteine
7976e29399
Use MACHINE_UUID in M115
...
Addressing #2879 . The M115 report should display `MACHINE_UUID` but it
always displays `UUID`.
2016-03-11 05:34:48 -08:00
Scott Lahteine
81aab828e2
Fix a "Heating failed" error
...
Addressing #3085 . If the target_temperature is set directly it never invokes or disables the timer set in `start_watching_heater`, so after _stopping a print_ or turning off _all heaters_ you could get a “Heating failed” error.
2016-03-11 05:07:48 -08:00
Scott Lahteine
0c48eaf3de
Expose motor current in more configs, disable by default
2016-03-11 02:25:36 -08:00
Elijah Snyder
e8b10d2836
Adding PWM_MOTOR_CURRENT flag to help expose PWM_MOTOR_CURRENTS in Configuration_adv.h similar to DIGIPOT_MOTOR_CURRENT
2016-03-11 02:25:36 -08:00
João Brázio
4d4a842cfb
Update the bed topography output done by G29
2016-03-10 13:24:17 +00:00
Scott Lahteine
89838cdb10
Move step macros to stepper_indirection.h
2016-03-10 04:34:55 -08:00
João Brázio
793cd0ae3b
Clean up the code a bit
2016-03-10 11:52:43 +00:00
Scott Lahteine
27f244ba2c
Support MAX31855 as Temperature Sensor -3
2016-03-10 02:49:54 -08:00
Scott Lahteine
ce639b8b03
Group FILAMENT_SENSOR options together
2016-03-10 02:41:37 -08:00
Scott Lahteine
3fd31976c3
Reduce code in stepper.cpp with macros
2016-03-10 01:42:58 -08:00
Scott Lahteine
b45a0c4c60
Fix bugs in edit submenus so they return to origin
...
Expected behavior: After editing a value the menu should return to the
previous place with the edited item selected.
Actual behavior: Either the top (back) item from the previous screen is
selected, or the menu jumps up another level.
Solution: Pass the correct arguments to `lcd_goto_menu` on click when
editing a value.
2016-03-09 21:06:56 -08:00
jbrazio
986b508ff7
Print timer now stops when it sees the last extruder temperature being shutdown
2016-03-08 18:11:02 +00:00
AnHardt
fd5414c6ea
Z_RAISE_BEFORE_HOMING -> MIN_Z_HEIGHT_FOR_HOMING
...
rebased
corrected spelling
changed to #elif for error
Still with MIN_Z_HEIGHT_FOR_HOMING but con be done with (folder wide) search-replace when we have a better name.
2016-03-08 17:50:23 +01:00
Scott Lahteine
b7928a000a
Merge pull request #3108 from AnHardt/M110+
...
M110 and M29 rework
2016-03-08 03:54:07 -08:00
Scott Lahteine
5cba0b4187
Merge pull request #3111 from thinkyhead/rc_drop_old_condition
...
Drop obsolete test for leading "N"
2016-03-08 03:07:25 -08:00
Scott Lahteine
302d1bfbc4
Drop obsolete test for leading "N"
2016-03-08 02:25:11 -08:00
AnHardt
37b857e8ec
M110 ang M29 rework
...
Add 'ok' output for G29 actually closing the file.
Handle M110 when received without linenumber/checksumm.
2016-03-07 22:27:01 +01:00
esenapaj2
29e09c7c3e
update example configurations
...
update old comments
update or delete deprecated definitions
complement forgotten updates
adjust spacing
some cosmetic changes
2016-03-07 22:03:33 +09:00
Scott Lahteine
fac85f6fa1
Merge pull request #3102 from jbrazio/bugfix-g28-multiple-z-movements
...
Bugfix: G28 was lifting Z-axis multiple times
2016-03-07 03:52:00 -08:00
jbrazio
642e3699ce
Z-axis was being lift multiple times if Z_SAFE_HOMING was enabled and Z_RAISE_BEFORE_HOMING was greater than zero
2016-03-07 03:49:11 +00:00
Scott Lahteine
501f63802a
Merge pull request #3077 from Blue-Marlin/watchdogreset-in-kill
...
Add Watchdog timer reset in kill()
2016-03-06 16:21:39 -08:00
Scott Lahteine
1002eb67c8
Update name of st_get_axis_position_mm in stepper.h
2016-03-06 15:46:39 -08:00
Jaroslav Škarvada
d229c58df6
Fixed Makefile to work with Melzi2 boards on arduino-1.6.x
...
- also by default use ${HOME}/Arduino as install directory which may be more
sane, especially with arduino packages provided by distributions
- bump arduino version to 106 (this seems to be useless)
- program firmware through the USB serial which is more comfortable way how
to program the firmware
- use 57600 programing speed by default which seems to be more reliable
with arduino bootloaders (at least with those shipped with the Melzi2 boards)
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
2016-03-06 20:12:01 +01:00
Jaroslav Škarvada
7dde761aa6
Fix MELZI_MAKR3D to use correct motherboard
...
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
2016-03-06 19:33:33 +01:00
Scott Lahteine
eafbc5e0cc
Add AJ4P pins and fix RAMBO pins
2016-03-06 05:52:01 -08:00
Scott Lahteine
cf792fd8d8
Update configurations to use RAMPS 1.4
2016-03-06 05:52:01 -08:00
Scott Lahteine
cacf04f8a7
Base RAMPS-like boards on RAMPS 1.4
2016-03-06 05:52:00 -08:00
Scott Lahteine
50e3482e0a
Handle RAMPS 1.3 as the special case
2016-03-06 05:52:00 -08:00
Scott Lahteine
679be3294f
Rename RAMPS 1.3 pins for RAMPS 1.4
2016-03-06 05:52:00 -08:00
Scott Lahteine
f18d3f451a
Limit LCD move_to_x/y coordinates for deltas
...
Related to MarlinFirmware/MarlinDev#270
2016-03-06 05:52:00 -08:00
Scott Lahteine
988332c67a
Cosmetic tweaks from dev
2016-03-06 05:52:00 -08:00
Scott Lahteine
2690d8568e
DOGLCD width/height in Conditionals.h
2016-03-06 05:51:59 -08:00
Scott Lahteine
614febaaf3
Fix acceleration limits
...
See: https://github.com/Ultimaker/Marlin/pull/7
2016-03-06 05:51:59 -08:00
Scott Lahteine
13ef12ad3f
Fix power calculations
...
As suggested by @max-pau in #3073 - #3074
2016-03-06 05:51:59 -08:00
Scott Lahteine
e2b022cce2
Include #3053
2016-03-06 05:51:59 -08:00
Scott Lahteine
5cba0210f2
Small patch to Z_SAFE_HOMING comment
2016-03-06 05:51:58 -08:00
Scott Lahteine
6165fd41a5
Fix Hephestos 2 and other configs
2016-03-06 05:51:58 -08:00
Scott Lahteine
71718d888a
Fix typos in check_axes_activity
2016-03-06 05:51:58 -08:00
Lukas Abfalterer
83795d3e63
deleted double used comments
2016-03-06 05:51:58 -08:00
jbrazio
143ad74db7
Update PROBE_OFFSET_FROM_EXTRUDER comment section in all example config
...
files.
2016-03-06 05:51:58 -08:00
jbrazio
b0f5ba0232
Update the PROBE_OFFSET_FROM_EXTRUDE comment section
...
This changes have being discussed at MarlinFirmware/Marlin#2849 .
2016-03-06 05:51:57 -08:00
jbrazio
02b131b552
Replaced stock BQ PID values with fine tuned ones generated using M303
2016-03-06 05:51:57 -08:00
jbrazio
45dc8a51f3
Added readme file for bqh2 and disabled the SLOWDOWN config flag
2016-03-06 05:51:57 -08:00
Scott Lahteine
6a21180bd4
Implemented BQ ZUM Mega 3D board layout as an override to RAMPS 1.3
2016-03-06 05:51:57 -08:00
jbrazio
b18816fcbf
Fine tuned XYJERK.
...
Disallowed the Z_PROBE_OFFSET_RANGE_MAX to be greater than zero.
2016-03-06 05:51:57 -08:00
jbrazio
be83036212
Applying suggestions by @thinkyhead at MarlinFirmware/Marlin#3049 .
...
- Remove the forced activation of SDSUPPORT, I guess people may use the ZUM
3D board and not the LCD module.
- Fixed the tab issue within boards.h file.
2016-03-06 05:51:56 -08:00
jbrazio
b82d91eca6
Added configuration example for the BQ Hephestos 2 3D printer.
...
Added support for BQ ZUM Mega 3D board and stock Hephestos 2 thermistor.
2016-03-06 05:51:56 -08:00
Scott Lahteine
45bcc43e48
Don't override SOURCE_CODE_URL in Default_Version.h
...
- Defining `SOURCE_CODE_URL` in `Default_Version.h` overrides it
elsewhere. So don’t define it there.
- Also fix up `language.h` so no `#undef` will be needed.
2016-03-06 05:51:56 -08:00
Scott Lahteine
ef68c1910c
Check that the temperature is close to target
2016-03-06 05:51:56 -08:00
Scott Lahteine
ea9fd1200b
Fix M109 so it won't wait for cooling
...
Addressing issue #2767
2016-03-06 05:51:56 -08:00
Scott Lahteine
e4945b30d2
sbi and cbi are deprecated
2016-03-06 05:51:55 -08:00
Scott Lahteine
ff13070b59
Use _BV macros, patch up others
2016-03-06 05:51:55 -08:00
Scott Lahteine
209f5f21e0
Use macros where possible
...
Apply `constrain`, `NOMORE`, `NOLESS` and `CRITICAL_SECTION` macros
wherever possible.
2016-03-06 05:51:55 -08:00
Scott Lahteine
c8f76bb8aa
Create BITSET/BITCLR macros
2016-03-06 05:51:55 -08:00
Scott Lahteine
adc25db8c4
Merge pull request #3005 from thinkyhead/rcbugfix_eeprom
...
Fix layout descr. in configuration_store.cpp
2016-03-06 00:31:44 -08:00
Scott Lahteine
e7cf85b922
Merge pull request #3013 from thinkyhead/esenapaj-patch-1
...
Enhanced #3010 - formal Mesh/Manual dependency
2016-03-06 00:30:02 -08:00
Scott Lahteine
6e64895c30
Merge pull request #3001 from AlwaysTinkering/RCBugFix
...
Rc bug fix - Fix for issue #2931
2016-03-06 00:20:29 -08:00
Scott Lahteine
34b8b9f0f5
Merge pull request #2995 from thinkyhead/rcbugfix_corexy_corexz
...
Add CORE support to st_get_position_mm (and elsewhere)
2016-03-06 00:17:03 -08:00
Scott Lahteine
1e20949afb
Merge pull request #3092 from thinkyhead/rc_2860_printrbot_lcd
...
Fix Printrboard with LCD (redo)
2016-03-06 00:14:29 -08:00
Scott Lahteine
f5972c4d2c
Merge pull request #2994 from AnHardt/Inerrup-save-serial
...
Interrupt safe serial --- Guard against non-atomic variable changes from interrupt routines
2016-03-05 22:25:12 -08:00
Scott Lahteine
3a3d358df9
Fix Printrboard with LCD (redo)
...
Based on #2860 - rebased for RCBugFix
2016-03-05 22:13:00 -08:00
Scott Lahteine
eb85342fd9
Merge pull request #2989 from AnHardt/fix2661
...
Pre home display - Stepper release
2016-03-05 21:30:17 -08:00
Scott Lahteine
14f3ca1b2e
Merge pull request #2978 from thinkyhead/tool_offset_abl_rcbugfix
...
Apply bed leveling matrix when switching extruders
2016-03-05 21:23:25 -08:00
Scott Lahteine
91fcdc2b99
Merge pull request #3090 from thinkyhead/rc_spelling
...
Various minor spelling corrections
2016-03-05 20:50:34 -08:00
Scott Lahteine
772460a7b8
Various minor spelling corrections
...
Redo of #2939 rebased against RCBugFix
2016-03-05 20:41:15 -08:00
lrpirlet
0fb507a75d
correct raise_z_for_servo
2016-03-05 20:19:53 -08:00
Scott Lahteine
04a0d45c22
Merge pull request #2821 from MarlinFirmware/ReinitializeDisplay
...
Fix status LEDs update when reinitializing the display
2016-03-05 15:31:49 -08:00
Blue-Marlin
b4e5e0f11d
Add Watchdog reset in kill()
...
Add watchdog reset in the kill loop to simplify recovering.
2016-03-04 00:35:18 +01:00
Scott Lahteine
547d35a921
Merge pull request #3067 from Blue-Marlin/ALARM_PIN
...
Remove unused ALARM_PIN
2016-03-02 20:20:26 -08:00
Scott Lahteine
79778d46d9
Merge pull request #3066 from Blue-Marlin/Fix-disable_all_heaters()
...
Fix disable_all_heaters() for MAX6675
2016-03-02 17:35:08 -08:00
Blue-Marlin
a68228bf55
Remove unused ALARM_PIN
...
Remove unused ALARM_PIN from all the Configuration.h's
2016-03-02 14:29:49 +01:00
Scott Lahteine
9eb4aceee4
Merge pull request #2986 from thinkyhead/enable_watchdog
...
Enable USE_WATCHDOG by default
2016-03-02 05:29:42 -08:00
Blue-Marlin
0631541166
Fix disable_all_heaters() for MAX6675
2016-03-02 14:17:23 +01:00
Scott Lahteine
222d13d5ed
Merge pull request #3051 from thinkyhead/rcbugfix_dual_axis_offset
...
Code cleanup in gcode_T
2016-03-02 03:45:40 -08:00
Scott Lahteine
186629aee8
Merge pull request #3057 from jbrazio/3034-z_raise_after_probing_fix
...
Fix Z_RAISE_AFTER_PROBING for non DELTA printers
2016-03-02 03:14:27 -08:00
Scott Lahteine
a42fb35c56
Merge pull request #3050 from Blue-Marlin/fix-1166
...
Temporary workaround for stack overflow
2016-03-01 11:33:19 -08:00
jbrazio
67e15aac3d
As pointed out by @Blue-Marlin the previous code would raise the Z axis
...
twice for a servo based probe.
2016-03-01 00:22:48 +00:00
jbrazio
17cc2a9663
Z_RAISE_AFTER_PROBING value was being ignored by Marlin because
...
raise_z_after_probing() was only called if the printer type was set to a
DELTA or if the printer had a docking sled for the probe.
2016-02-29 15:48:26 +00:00
Scott Lahteine
252f4a75cd
Merge pull request #3043 from oxivanisher/RCBugFix
...
Example configuration for Kossel XL
2016-02-28 23:57:13 -08:00
Scott Lahteine
fd1243c184
Merge pull request #3052 from thinkyhead/rc_fix_m145_eeprom_output
...
Fix "M145" output in M503 report
2016-02-28 23:43:08 -08:00
Scott Lahteine
0bc648353f
Merge pull request #3031 from tnw513/RCBugFix
...
Fix board type for Hephestos: RAMPS 1.4
2016-02-28 23:23:01 -08:00
AnHardt
f27c2b6b4b
Reimplement #2892
...
Include #2892 to fix the isHeating symbol in the extruder graphics
2016-02-28 23:20:30 +01:00
AnHardt
615bec2329
Activate warning about possible reduced accuracy by default
...
Renamed `WARN_REDUCED_ACCURACY` to `DISABLE_REDUCED_ACCURACY_WARNING`
Changed the condition for blinking from
```
#if ENABLED(WARN_REDUCED_ACCURACY)
```
to
```
#if DISABLED(DISABLE_REDUCED_ACCURACY_WARNING)
```
2016-02-28 23:20:21 +01:00
AnHardt
1c889cd303
Refresh previous_cmd_ms during run_z_probe()
...
Refresh previous_cmd_ms during run_z_probe() to prevent:
stepper shutdown for expired DEFAULT_STEPPER_DEACTIVE_TIME
and extrudes for expired EXTRUDER_RUNOUT_SECONDS
(https://github.com/MarlinFirmware/MarlinDev/issues/238 )
2016-02-28 23:20:12 +01:00
AnHardt
4b02f33e69
Distribute config-changes to the other configurations
2016-02-28 23:20:04 +01:00
AnHardt
be24fdacea
The same changes to the axis-letters now for the char-displays
...
Exactly the same - copy/paste.
2016-02-28 23:19:54 +01:00
AnHardt
5b0f659355
Changes for graphics displays
...
Replaced displaying "---" instead of the value of a coordinate when
unhomed or with reduced precision
with blinking the coordinate-prefix-character ('X','Y','Z').
For "unhomed" a '?' is shown every second second - until that axis is
homed. The value displayed is, as before the "---" where displayed, the
relative to the reset position coordinate value.
When the axis stepper was disabled, now we can display a hint on that,
by showing a blinking ' ' instead of the axis letter, when
WARN_REDUCED_ACCURACY is defined.
I suppose the code itself is here the better documentation.
A '+/-' character is in non of our charsets so i decided for a '?' for
now to reduce the work.
There is no additional space on the displays one could use to display
the information, so replacing something is the only option. As the axis
letters are totally redundant with their positions on the display they
contain the least information.
So my decision was to overwrite them.
2016-02-28 23:19:32 +01:00
AnHardt
32ae9f9ab7
Fix stepper shutdown during waiting for temperatures
...
In the wait loops of M109 M190 idle() is called, what checks
stepper_inactive_time against previous_cmd_ms.
Because we can be several minutes inside the loop, resetting
previous_cmd_ms only outside the loop caused stepper shutdowns.
The name of previous_cmd_ms does not really reflect its use. It's set
not only when a new command was received or executed but also in many of
the movement routines. For that the little extension of using it during
the wait will (hopefully) not hurt.
# Conflicts:
# Marlin/Configuration_adv.h
2016-02-28 16:58:50 +01:00
AnHardt
b6e69e71ce
Make stepper shutdown after inactivity dependent
...
Make stepper shutdown after inactivity dependent on a new set of
#defines.
DISABLE_INACTIV_X
DISABLE_INACTIV_Y
DISABLE_INACTIV_Z
DISABLE_INACTIV_E
And make exemplaric Configuration.
Names can be discussed.
This makes the disabling of the steppers independent from the DISABLE_?
settings witch shut down the steppers immediately.
2016-02-28 16:58:42 +01:00
AnHardt
051325ccd7
Introduce axis_homed
...
Introduce additional variable axis_homed to replace axix_known_position
when the coordinate display should indicate the axis is not homed.
This is to distinguish between "not homed" and "inexact position possible
because stepper was disabled".
# Conflicts:
# Marlin/ultralcd_implementation_hitachi_HD44780.h
solved
2016-02-28 16:58:28 +01:00
AnHardt
e736779d7e
blink for char-lcds
...
Implement and test blinking for char-lcds
# Conflicts:
# Marlin/ultralcd_implementation_hitachi_HD44780.h
solved
2016-02-28 16:58:19 +01:00
Scott Lahteine
7253a1971d
Fix "M145" output in M503 report
2016-02-27 22:28:08 -08:00
Scott Lahteine
d118e3f985
Merge pull request #3044 from thinkyhead/rc_gcode_spaces
...
Fix GCode handling of spaces between command letter and first digit
2016-02-27 22:21:28 -08:00
Scott Lahteine
100271e6ac
minor cleanup in gcode_T
2016-02-27 19:56:56 -08:00
Blue-Marlin
fd9e94e5a4
Fix crashes when the Z axis is moved via LCD
...
Fix crashes when the Z axis is moved via LCD
by calling `plan_buffer_line` only when there is enough room in the
planner buffer, to avoid endless recursion.
A brief description about what went wrong is in #1166
2016-02-28 00:59:47 +01:00
Scott Lahteine
8dccd5a7ea
Merge pull request #3018 from CONSULitAS/RCBugFix_K8200_backinsync
...
K8200: sample config back in sync
2016-02-27 05:22:12 -08:00
Scott Lahteine
6a4f06d35d
Fix GCode handling of spaces between command letter and first digit
2016-02-26 18:42:59 -08:00
Marc Urben
68eae2b5a8
added kossel xl example configuration
2016-02-27 01:48:45 +01:00
Silvio Didonna
eb5817675d
Fix board type: RAMPS 1.4
2016-02-25 15:52:41 +01:00
AnHardt
cb88fdd242
Protect MarlinSerial against interrupts
...
Protect MarlinSerial against interrupts
by shielding the CRITICAL_SECTIONs
Now with a test if RX_BUFFER_SIZE is in the required range.
Code in peek() and read() is now optimized for readability and showing the similarity between the two.
Maybe a bit overprotected in checkRx() and store_char(), but now some days without detected errors from this source.
2016-02-24 17:18:12 +01:00
AnHardt
dc0f41868e
Make rx tail/head atomic
2016-02-24 15:51:34 +01:00
CONSULitAS
ea8409ad5d
Fix: current_command_args contains command
...
@thinkyhead
Hi Scott,
your code from a0f362c@thinkyhead is great, but you forgot to skip the
command.
Symptom `M117 Test`shows `M117 Test` on LCD instead of `Test`.
see also
https://github.com/MarlinFirmware/Marlin/commit/a0f362c735401ebbcd95de3f
6f8e3c2f17ecc770 lines 941, 2851 and so on
Greetings and welcome back
Jochen
2016-02-24 09:35:04 +01:00
Scott Lahteine
9a3408e58f
Merge pull request #3024 from thinkyhead/rc_remove_steps_mm_e
...
Remove obsolete STEPS_MM_E setting
2016-02-23 23:37:09 -08:00
Scott Lahteine
1093c780c8
Remove obsolete STEPS_MM_E setting
2016-02-23 01:11:58 -08:00
CONSULitAS
a4fe6a45ae
K8200: sample config back in sync
...
* Configuration.h:
* updated header comment
* new UUID feature used
* sync to default config
* typos fixed
* changes better documented
* reflect change in SDSUPPORT feature
* Configuration_adv.h
* updated header comment
* thermal protection tuned to work with K8200
* homing tuned
* sync to default config
* typos fixed
* changes better documented
* reflect change in LCD features
* use long filenames
* use Watchdog
* use Babystepping
* use Auto Filament Change
2016-02-21 16:06:25 +01:00
Scott Lahteine
c2e5c6c12c
Nest Manual Bed Leveling options
...
This formalizes the dependency of MANUAL_BED_LEVELING on
MESH_BED_LEVELING
2016-02-20 20:35:10 -08:00
Scott Lahteine
042a6a0a37
Extend existing MESH_BED_LEVELING test
2016-02-20 20:35:10 -08:00
esenapaj
08b3147791
sanity check for MANUAL_BED_LEVELING
2016-02-20 20:35:10 -08:00
Scott Lahteine
9f8e6dce20
Merge pull request #2942 from esenapaj/esenapaj-patch-2
...
more suitable display format for delta printer
2016-02-18 17:59:35 -08:00
Scott Lahteine
e1beaf61eb
Merge pull request #2985 from AnHardt/adv-ok
...
Repair N in ADVANCED_OK
2016-02-18 17:06:26 -08:00
esenapaj
34cde1b77c
Merge pull request #14 from MarlinFirmware/RCBugFix
...
Rc bug fix
2016-02-19 09:19:23 +09:00
Scott Lahteine
f00ca3fd89
Fix layout descr. in configuration_store.cpp
2016-02-17 19:44:04 -08:00
Scott Lahteine
0c9db67273
Merge pull request #2983 from AnHardt/ok-echo
...
Replace the "ok" in M280, M301, M304, M851 with output not including …
2016-02-17 19:09:41 -08:00
Scott Lahteine
fbfbc5e330
Enable USE_WATCHDOG by default
2016-02-17 17:14:57 -08:00
Scott Lahteine
d4e7c2d694
Merge pull request #2976 from thinkyhead/drop_configurator
...
Drop the experimental Configurator
2016-02-17 17:08:08 -08:00
Scott Lahteine
9df0e0e0cc
Merge pull request #2974 from thinkyhead/sanitycheck_spi_speed
...
Sanity-check deprecated options replaced by SPI_SPEED
2016-02-17 17:07:58 -08:00
Scott Lahteine
3e2473e695
Merge pull request #2988 from thinkyhead/z2_more_extruders
...
Use next open E connector for Y2/Z2
2016-02-17 17:07:07 -08:00
Scott Lahteine
8eaba020fb
Merge pull request #2973 from thinkyhead/fix_splash_url
...
Remove references to marlinfirmware.org
2016-02-17 17:05:06 -08:00
Scott Lahteine
438a87eba8
Sanity check deprecated SDSLOW, SDEXTRASLOW
2016-02-17 14:54:10 -08:00
Scott Lahteine
b19b272172
Update configurations with SPI_SPEED
...
- Include aligned comment about new SDSUPPORT behavior
2016-02-17 14:54:09 -08:00
Scott Lahteine
7f30f85602
Merge pull request #2987 from thinkyhead/gcode_allow_no_initial_space
...
Fix handling of spaces in GCode
2016-02-17 14:51:19 -08:00
Scott Lahteine
b81d3b83cf
Drop the experimental Configurator
...
Development moved to https://github.com/thinkyhead/MarlinConfigurator
2016-02-17 14:49:37 -08:00
Scott Lahteine
be691b51f1
Remove references to marlinfirmware.org
...
The domain is gone and doesn’t redirect, so for now show no URL on the boot screen.
2016-02-17 14:41:46 -08:00
Scott Lahteine
f3f58bd619
Merge pull request #2992 from thinkyhead/rc_rename_fpos_t
...
Rename fpos_t to avoid libc conflict
2016-02-17 14:40:33 -08:00
Scott Lahteine
83ffc9eb4f
Show raw steps in M114
...
This is a proposed change. This section of M114 output is a debug
extension according to RepRap wiki.
2016-02-15 15:59:24 -08:00
Scott Lahteine
373e8a1ad4
Fixes for COREXY and COREXZ coordinates
2016-02-15 15:59:24 -08:00
unknown
31656e68bc
Fix for homing X and Y before raising Z when Z_SAFE_HOMING is set.
2016-02-15 15:53:40 -06:00
unknown
8ea55323d8
Fix for not raising Z before homing X and Y
2016-02-15 14:52:04 -06:00
Scott Lahteine
b83e472bd3
Rename fpos_t to avoid libc conflict
2016-02-10 20:49:25 -08:00
Scott Lahteine
68457ee903
For Dual Y/Z use the next available extruder pins
2016-02-09 21:59:09 -08:00
Scott Lahteine
711e5db19a
Tweak comment in process_next_command
2016-02-09 18:16:35 -08:00
Scott Lahteine
400e9329be
Allow spaces after a code letter
2016-02-09 18:03:13 -08:00
Scott Lahteine
cdcb80f3c5
Allow no-space after initial command
...
Addresses issue #2715
2016-02-09 18:00:35 -08:00
AnHardt
6f473f7fc6
Repair N in ADVANCED_OK
...
Send the correct line number.
If no N was in the command - non't send an N.
2016-02-09 19:23:26 +01:00
AnHardt
efbd705eda
Replace the "ok" in M280, M301, M304, M851 with output not including an "ok"
...
Replace the "ok" in M280, M301, M304, M851 with output not including an "ok"
to avoid senting two "ok"s for a single g-code.
Doing the same for M105 would break the input filters of the hosts.
For M105 the other "ok" is omitted.
2016-02-09 13:36:03 +01:00
Scott Lahteine
8e66028d25
Apply the ABL rotation matrix to the extruder offset.
2016-02-08 14:22:18 -08:00
esenapaj
ab5aa3fc92
Merge pull request #5 from MarlinFirmware/RCBugFix
...
Rc bug fix
2016-02-08 05:42:11 +09:00
esenapaj
27d918d836
Merge pull request #4 from MarlinFirmware/RCBugFix
...
Rc bug fix
2016-02-08 05:35:32 +09:00
Scott Lahteine
159ff94afd
Remove obsolete HEATER_BED_DUTY_CYCLE_DIVIDER #2977
2016-02-07 08:02:11 -06:00
Ruwan J Egoda Gamage
1270fbfd38
Using SET_INPUT instead of pinMode
2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage
b58083b0fa
Getting rid of SDEXTRASLOW, SDSLOW variables.
2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage
1833049b8a
reusing millis()
2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage
1b7c443628
Adding SDULTRASLOW variable.
...
Instead of changing SDEXTRASLOW variable to a slower speed, the new
SDULTRASLOW is used for rigidbot panel.
2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage
6f9e9c0e4f
Cleaning up, getting rid of the fake encoder count variable.
2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage
becbfe1065
Fixing Rigidbot LCD Panel Support
2016-02-07 07:58:52 -06:00
esenapaj
4882a7eded
more suitable display format for delta printer
2016-01-29 18:38:25 +09:00
esenapaj
d7272e3f36
Merge pull request #3 from MarlinFirmware/RCBugFix
...
Rc bug fix
2016-01-29 05:43:22 +09:00
Scott Lahteine
62bad1b60f
Merge pull request #2848 from japzi/RCBugFix
...
Fixing Rigidbot LCD Panel Support
2016-01-26 17:30:12 -08:00
esenapaj
59d345a3dd
Update Configuration.h
2016-01-22 07:27:11 -06:00
esenapaj
b8f0c8a4c7
Update Configuration.h
2016-01-22 07:27:11 -06:00
esenapaj
df0d599c79
Update Configuration.h
2016-01-22 07:27:11 -06:00
esenapaj
a366697649
Update Configuration.h
2016-01-22 07:27:11 -06:00
Richard Wackerbarth
7c94c83765
Repair formula mangled by PR#1319 in Jan 2015
2016-01-15 10:06:27 -06:00
Naruto-kyun
2932602643
Update stepper.cpp
...
Forgot Z2_MIN_PIN
2016-01-15 16:50:43 +01:00
Ruwan J Egoda Gamage
06555febdd
Using SET_INPUT instead of pinMode
2015-12-24 12:12:25 -05:00
esenapaj
8d2aa2368d
Update Configuration_adv.h
2015-12-23 08:16:36 +09:00
esenapaj
0de5fcad0a
Update Configuration_adv.h
2015-12-23 08:16:06 +09:00
esenapaj
1403b9acc0
Update Configuration_adv.h
2015-12-23 08:15:20 +09:00
esenapaj
5cf1c38ea1
Update Configuration_adv.h
2015-12-23 08:12:54 +09:00
esenapaj
04ab61bf40
Update Configuration_adv.h
2015-12-23 08:12:28 +09:00
esenapaj
39c62fbd6f
Update Configuration_adv.h
2015-12-23 08:12:04 +09:00
esenapaj
efcb769003
Update Configuration_adv.h
2015-12-23 08:09:57 +09:00
esenapaj
992fbb831d
Update Configuration_adv.h
2015-12-23 08:08:45 +09:00
esenapaj
5ee6fe6385
Update Configuration_adv.h
2015-12-23 08:07:12 +09:00
esenapaj
056daf00fc
Update Configuration_adv.h
2015-12-23 08:06:15 +09:00
esenapaj
71aafb79a0
Update Configuration_adv.h
2015-12-23 08:03:54 +09:00
Ruwan J Egoda Gamage
2c9e0415c7
Getting rid of SDEXTRASLOW, SDSLOW variables.
2015-12-13 23:23:01 -05:00
Ruwan J Egoda Gamage
a64bcd53e9
reusing millis()
2015-12-13 22:06:03 -05:00
Ruwan J Egoda Gamage
e6cc232184
Adding SDULTRASLOW variable.
...
Instead of changing SDEXTRASLOW variable to a slower speed, the new
SDULTRASLOW is used for rigidbot panel.
2015-12-13 15:47:10 -05:00
Ruwan J Egoda Gamage
83c4131ba3
Cleaning up, getting rid of the fake encoder count variable.
2015-12-13 15:28:40 -05:00
Ruwan J Egoda Gamage
5eeea2f611
Fixing Rigidbot LCD Panel Support
2015-12-13 15:28:40 -05:00
Richard Wackerbarth
f6950acb8e
Residual unused variable — Backport
2015-12-10 19:48:08 -06:00
Richard Wackerbarth
7a670e3911
Improve planner & stepper PR #263
2015-12-10 07:24:37 -06:00
Richard Wackerbarth
58658c9279
Call the probe pin a probe pin and not a min endstop
2015-12-10 07:20:52 -06:00
Richard Wackerbarth
0fa3bac8ee
If unused, just don’t define it.
2015-12-10 07:20:52 -06:00
Richard Wackerbarth
3b2973da6a
Prepare Ramps for user redefinition
2015-12-10 07:20:52 -06:00
Richard Wackerbarth
1635613c25
Backport cosmetic
2015-12-10 07:20:52 -06:00
Richard Wackerbarth
0b429461d5
Back port Cosmetic changes
2015-12-10 07:20:52 -06:00
Richard Wackerbarth
0cebe85e65
Clean up spacing and duplicate entries
...
• Removing trailing whitespace
• Adjusting indention for better readability
• Removing duplicated entries
2015-12-10 07:20:52 -06:00
Richard Wackerbarth
e7b40bbe98
Change link to U8glib source
2015-12-10 06:33:29 -06:00
Richard Wackerbarth
e2da2b4105
Back port language translation
2015-12-10 06:31:41 -06:00
Richard Wackerbarth
4f314afaf0
Allow Thermistor #12 to be used on hotends also
...
//100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
Caveat Emptor —-
I’m not sure that this really makes sense,
but why keep someone from using it?
2015-12-10 06:31:31 -06:00
Scott Lahteine
60d5658da8
Revert nozzle_bed_fan_menu_items
...
For some reason that I cannot determine, using a sub-function causes
the Tune sub-menu to act strangely, yet replacing the function call
with its code content works perfectly.
2015-12-09 20:33:52 -06:00
AnHardt
57da1b8497
Host parseble output for M109, M190 and M303
...
Make the output of M105 more similar to Repetier.
Make the text-print pert of M105 an extra function to make it reusable. `print_heaterstates()`
Use `print_heaterstates()` in M019, M190 and M303
2015-12-07 15:37:53 -06:00
AnHardt
fcceb98191
Unglobalize no_wait_for_cooling
2015-12-07 15:34:26 -06:00
Wurstnase
78a347a01a
change nx, ny, nz and ne from float to long
...
st_set_position takes long
```void st_set_position(const long& x, const long& y, const long& z, const long& e)```
2015-12-07 08:22:44 -06:00
Wurstnase
6d691aceee
change dx, dy, dz and de from float to long
...
anything is long, we don't need float there
2015-12-07 08:22:24 -06:00
Richard Wackerbarth
6bfcb74c25
The probe stowing coordinates have changed
2015-12-05 19:31:59 -06:00
Wurstnase
0fbfb22506
Renaming delta speeds (PR2824)
...
dx -> dsx
dy -> dsy
dz -> dsz
de -> dse
2015-12-04 07:55:45 -06:00
AnHardt
8d1eeff021
Fix status LEDs update when reinitializing the display
...
Fix status LEDs update when reinitializing the display
By using the regular update function during init.
Fixing #2683
2015-12-03 07:18:35 -06:00
Richard Wackerbarth
5a54204f72
Marlin 1.1.0 Release Candidate 3 - 01 December 2015
2015-12-01 07:24:45 -06:00
AnHardt
bb4efcf603
Handle temp callbacks when THERMAL_PROTECTION_HOTENDS is not defined
...
by alternate definition for the callback macros
2015-12-01 07:21:52 -06:00
AnHardt
96d0d04b8f
Update LCD buttons less frequently
...
Move slow_buttons_update into the LCD_UPDATE_INTERVAL block
lcd_implementation_read_slow_buttons() will then be executed ~10 times a
second.
2015-11-30 05:44:32 -06:00
Richard Wackerbarth
e293ea57f0
Unbalanced brackets in setPwmFrequency
...
This is a back port of the correct in issue #248
2015-11-30 05:44:32 -06:00
AnHardt
c956b52c4a
Babystep Multiplier
...
Analog to https://github.com/MarlinFirmware/MarlinDev/pull/250 by
@RicardoGA
Restore the Babystep Multiplicator functionality and now it's available
for X/Y/Z
2015-11-30 05:43:10 -06:00
Richard Wackerbarth
956418c674
Kc is also a multi-PID parameter
2015-11-23 06:08:01 -06:00
AnHardt
33addc52a1
Suppress Z_MIN_PROBE_REPEATABILITY_TEST for DELTA and SCARA configurations (PR#2747)
...
For now Z_MIN_PROBE_REPEATABILITY_TEST is not possible for DELTA or SCARA
configurations.
This PR comments the feature out, where it is commented in by default.
2015-11-13 07:33:33 -06:00
AnHardt
8da2e98985
Split RAMPS 1.3 an 1.4 (PR#2741)
...
because of hardware differences on the SERVO0_PIN
2015-11-13 07:13:48 -06:00
AnHardt
be7167ed97
Change XY formatting on LCD (PR#2740)
...
According to #123 negative values for XY at or below -100 are displaying incorrectly, dropping the first digit. Deltas can easily have XY values in this range. This PR adds a function to display floats/ints formatted like `_123`, `-123`, `_-12`, or `__-1` as appropriate and applies it to the XY coordinates on Hitachi displays. It also moves the Z value to the right to be consistent with the XY formatting.
2015-11-13 06:46:11 -06:00
Luis Correia
e7099ea597
Fix Portuguese (Portugal) strings (PR#2700)
...
Align strings with release
2015-11-12 00:08:42 -06:00
Scott Lahteine
754b13d8fe
Patch issue #2315
2015-11-12 00:03:22 -06:00
Scott Lahteine
dbd4c17096
Init Kp, Ki, Kd to 0
2015-11-12 00:03:22 -06:00
Scott Lahteine
644c376e84
Use binary OR with endstop bits
2015-11-12 00:03:22 -06:00
Scott Lahteine
54a39d8c1a
Use a ternary in qr_solve.cpp
2015-11-12 00:03:22 -06:00
Scott Lahteine
17c23bbaf3
Shorten gcode_M221 yet function the same
2015-11-12 00:03:22 -06:00
Scott Lahteine
c0e791dbe9
Only look for "N" line number as first parameter
2015-11-12 00:03:22 -06:00
Scott Lahteine
b4af4441c5
Clean up watchdog impl.
2015-11-12 00:03:22 -06:00
Scott Lahteine
8f16563bbd
Use "defined" with LCD_PIN_BL and LCD_PIN_RESET
2015-11-12 00:03:22 -06:00
Scott Lahteine
6fa7e24af3
Use "UNUSED" to squash compiler warnings
2015-11-12 00:03:22 -06:00
Scott Lahteine
d5b7c595ae
Use static locals in utf_mapper.h
2015-11-12 00:03:21 -06:00
Scott Lahteine
9bdab4f3a8
Clean up "else" and other spacing
2015-11-12 00:03:21 -06:00
Scott Lahteine
9b23490f01
Clean up spacing in configs
2015-11-12 00:03:21 -06:00
esenapaj
c6c37abd41
Update language_kana.h
2015-11-12 00:00:51 -06:00
esenapaj
c24045475a
Update language_kana_utf8.h
2015-11-12 00:00:32 -06:00
Richard Wackerbarth
25d636c9e0
Compiler issues (PR#2696)
2015-11-11 23:52:11 -06:00
AnHardt
47401ec97b
MSG_EXTRUDER_SWITCHED_OFF was renamed to MSG_REDUNDANCY
...
in language.h, but was not renamed here. If TEMP_SENSOR_1 is enabled as redundant then
an error is thrown that MSG_EXTRUDER_SWITCHED_OFF is not defined.
Originaly by @12dstring
2015-10-08 10:45:11 -05:00
Scott Lahteine
ba6a243197
DEBUG message has no parameter (PR#2671)
2015-10-03 22:03:03 -05:00
Scott Lahteine
0c7f7ebcfb
Styling adjustments (PR#2668 & PR#2670)
...
Keep "astyled" reformatting
2015-10-03 22:02:45 -05:00
Rafa Couto
b5fb7075b9
Galician (gl) language.
2015-09-30 14:46:01 -05:00
Richard Wackerbarth
7b4bdc0203
DUAL_X_CARRIAGE motor enabling
...
As noted by @darkjavi et.al. in #103 , the E1 motor was not being enabled in planner.cpp when using DUAL_X_CARRIAGE. This patch enables and disables E1 as it should.
2015-09-30 04:31:19 -05:00
Richard Wackerbarth
91b5156b3e
Marlin 1.1.0 Release Candidate 2 - 29 September 2015
2015-09-29 20:28:41 -05:00
Richard Wackerbarth
03f0edb57e
Fix high LCD status screen update frequency (PR#2655)
2015-09-28 11:07:33 -05:00
KiteLab
0ad25c6665
Hint for changed behaviour of SDSUPPORT
2015-09-28 11:07:33 -05:00
Richard Wackerbarth
e01f5e1ef7
Cleanup
2015-09-17 10:44:23 -05:00
Mike Cochrane
5e36b64635
SDEXTRASLOW for some SD card readers (PR#176)
...
Add SDEXTRASLOW which runs the SD card at SPI_QUARTER_SPEED. Quarter speed is needed for RIGIDBOT_PANEL
2015-09-14 07:58:08 -05:00
Scott Lahteine
5d65a36dee
Give lcd_sd_status an UNKNOWN state (PR#180)
2015-09-14 06:32:27 -05:00
fmalpartida
0f149ea0c6
LCD home button causes repeated homing (PR#175)
...
Fix: increased debounce delay.
2015-09-14 06:31:49 -05:00
Scott Lahteine
b825567e0f
Drop www. from marlinfirmware.org (PR#175)
2015-09-14 06:28:53 -05:00
Scott Lahteine
db27e67580
Apply PID_ADD_EXTRUSION_RATE to extras
2015-09-12 07:53:20 -05:00
Scott Lahteine
bc50db9cf6
Implement PID_ADD_EXTRUSION_RATE
2015-09-12 07:53:20 -05:00
Scott Lahteine
cffb2d457e
Cleanup file formatting
2015-09-12 07:48:27 -05:00
Scott Lahteine
7ac7ddbf20
Show nozzles, heaters, and extruders numbered 1-4
2015-09-12 07:40:18 -05:00
Scott Lahteine
5bc480fee8
Fix Move E menu items
2015-09-12 07:33:49 -05:00
Scott Lahteine
fc882c34a3
Init lcd_sd_status as false to force lcd_update test
...
Replaces #145 which is way out of date
2015-09-12 07:32:20 -05:00
Scott Lahteine
e27dd5c22d
Conditionalize functions that rely on SDSUPPORT
2015-09-12 07:30:09 -05:00
Scott Lahteine
fabf3ae4a0
Add final Z raise after Delta probe
2015-09-12 07:23:24 -05:00
Petr Zahradnik
8c768a76a2
Create language_cz.h
...
Czech language translation.
2015-09-12 07:18:05 -05:00
Petr Zahradnik
5b9010965d
Update language.h
...
Added comment for Czech language (associated with file language_cz.h).
2015-09-11 04:43:54 +02:00
Scott Lahteine
89fb778684
Fix up probe pin define and test
2015-09-10 10:54:03 -05:00
Scott Lahteine
558665cd90
Constrain Tune > Nozzle/Flow menu items
2015-09-10 08:47:11 -05:00
Scott Lahteine
9f462f0cf5
Hack to address stuttering caused by ISR not finishing in time
...
(PR #138 )
When the ISR does not finish in time, the timer will
wrap in the computation of the next interrupt time.
This hack replaces the correct (past) time with a time not far in the future.
2015-09-10 08:26:17 -05:00
Scott Lahteine
8b3d63c423
Unify Delta XYZ homing rates
...
As noted in #130 allen key probe stow rate is based on homing rates,
but homing rates were left out of most delta configs. This unifies the
XYZ homing rates and applies the unified rates to allen key movements.
2015-09-08 13:11:55 -05:00
Scott Lahteine
7c72b57313
Unify manual feedrate and Fix LCD MANUAL_FEEDRATE (PR#128)
...
As noted by @o-lampe at https://github.com/MarlinFirmware/MarlinDev/issues/114#issuecomment-136757614 the `MANUAL_FEEDRATE` for Delta Z should be the same as XY.
2015-09-08 13:11:55 -05:00
Scott Lahteine
f690b82343
Remove extra MAX_FREQ_TIME define (PR#148)
2015-09-08 13:11:12 -05:00
Scott Lahteine
a4c78ae786
Add E1 pins to SENSITIVE_PINS for Dual Y or Dual Z
2015-09-07 09:41:06 -05:00
Scott Lahteine
a39fadf876
Update kossel-pro example config (again?)
2015-09-07 09:41:06 -05:00
Scott Lahteine
34e0a8d848
Move Y2 and Z2 pins defines to pins.h
2015-09-07 09:41:06 -05:00
Scott Lahteine
28599c51c7
Wrap Dual Y options in a conditional
2015-09-07 09:41:05 -05:00
Scott Lahteine
11a065c0ca
Remove Z2 pins overrides from Configuration_adv.h
2015-09-07 09:41:05 -05:00
Scott Lahteine
f7f6b5faae
Fix lcd_move_e compile error (PR#143)
...
Fix a compile error introduced in #98
2015-09-07 09:36:05 -05:00
Scott Lahteine
2b30e8ac99
Conditionals for ULTIPANEL without SDSUPPORT
2015-09-06 02:04:49 -05:00
Scott Lahteine
7c7a4051fe
Disable SDSUPPORT by default
...
As noted in #133 you can’t disable `SDSUPPORT` with `MAKRPANEL`,
`PANEL_ONE`, `MINIPANEL`, or `ULTIPANEL`. This patch makes it possible
to disable `SDSUPPORT` on these controllers and then disables it by
default.
Users of these controllers will now need to enable `SDSUPPORT` in their
configurations as others currently do.
2015-09-06 02:04:49 -05:00
Eric Kuzmenko
b23d765991
Added Extrude From Multiple Extruders from LCD feature
2015-09-05 05:33:18 -05:00
Christian Lefrançois
8347a9d6e4
Fix HOMING_BUMP_DIVISOR for deltas configuration
...
* Re-bump speed divisor should be the same for delta printer.
2015-09-03 09:26:28 -05:00
Scott Lahteine
703df2cb6c
Fix error message for probe region sanity check
2015-09-03 03:27:47 -05:00
Shane Francis
4c8330c15c
Trim Adjustments for Delta Configurations
2015-09-03 01:05:33 -05:00
Scott Lahteine
962120d1d2
Fix spacing in some conditional blocks
2015-08-27 20:59:09 -05:00
Richard Wackerbarth
20b4772155
Create DEBUG_LEVELING_FEATURE
2015-08-27 20:52:08 -05:00
Scott Lahteine
194f98ff95
Debug messages for homing and leveling
2015-08-27 20:52:08 -05:00
Richard Wackerbarth
6292d9e815
Rename ENABLE_AUTO_BED_LEVELING
...
With the introduction of the #if ENABLED(…)
reads better than
2015-08-27 20:52:08 -05:00
Richard Marko
91fd66ffba
add Lulzbot TAZ4 example configuration (PR#104)
2015-08-27 08:36:43 -05:00
Wurstnase
7a275773ee
remove colon in utf_mapper.h (PR#106)
2015-08-27 07:15:23 -05:00
Chris Bruner
6b4b6fa315
update for newest version of U8glib_Arduino
2015-08-26 19:52:59 -05:00
Christian Lefrançois
9897a9147c
Update ABL comments (PR#95)
...
* Updates the auto bed leveling comments ONLY.
* Renames "Z probe" word usage in //comments and #errors properly.
2015-08-26 05:51:38 -05:00
Christian Lefrançois
a7822e3ff7
Some renaming of Z_PROBE to Z_MIN_PROBE (PR#91)
...
* Fix a couple of renames omission and macro expansion errors.
2015-08-20 06:04:46 -05:00
Richard Wackerbarth
ad90e851b3
Use a small unsigned integer type
2015-08-16 06:56:47 -05:00
Richard Wackerbarth
29b456ae07
Suppress some compiler warnings
2015-08-16 06:56:47 -05:00
Scott Lahteine
23d742bf06
Don't free the stack array plane_equation_coefficients (PR#83)
2015-08-16 06:53:24 -05:00
Scott Lahteine
e3b1e08777
Patch G30 to use raise_z_for_servo (PR#73)
2015-08-15 21:47:04 -05:00
Scott Lahteine
a1eb90d5c0
Save another 30 bytes in gcode_SET_Z_PROBE_OFFSET
2015-08-12 21:26:32 -05:00
Scott Lahteine
91122277f4
Reduce gcode_SET_Z_PROBE_OFFSET by 88 bytes
2015-08-12 21:26:25 -05:00
AnHardt
5707a2c3d5
indexindexIntoAB is only vald for !DELTA
2015-08-11 17:32:11 -05:00
AnHardt
d8860f9ad9
Alway end at the same point
...
Always end at [RIGHT_PROBE_BED_POSITION, BACK_PROBE_BED_POSITION]
Regardles the evennes of auto_bed_leveling_grid_points.
2015-08-11 17:32:11 -05:00
AnHardt
4ca8f4a9a7
Always zigzag
...
Use the shortest way between probing-points.
2015-08-11 17:32:11 -05:00
AnHardt
3d23424121
Add array indexIntoAB[xx][yy]
...
and use it.
2015-08-11 17:32:11 -05:00
AnHardt
e2d69f66b2
Make Z_PROBE a Z_MIN_PROBE (PR#65)
...
Currently we use the probe exclusively as a device to find the build platform(bed).
For the currently supported setups this means, we use it as a additional min-endstop.
A triggered when not deployed probe disturbs the homing process for max-endstops.
Rename ENDSTOPPULLUP_ZPROBE to ENDSTOPPULLUP_ZMIN_PROBE
Rename Z_PROBE_ENDSTOP_INVERTING to Z_MIN_PROBE_ENDSTOP_INVERTING
Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP
Rename DISABLE_Z_PROBE_ENDSTOP to DISABLE_Z_MIN_PROBE_ENDSTOP
Rename Z_PROBE_REPEATABILITY_TEST to Z_MIN_PROBE_REPEATABILITY_TEST
Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP
Adjust comments accordingly
Remove Z_MAX check for the probe in update_endstops().
Using an delta related idea of @clefranc from #61 ,
extended to the general change for all setups.
Tested with Prusa i3, max-z-endstop and permanently triggered z-probe.
Worked for @clefranc's delta.
2015-08-11 14:41:36 -05:00
AnHardt
6a6e863a47
Resolve #2581 by adding a missed ';' (PR#67)
2015-08-10 12:51:59 -05:00
RicardoGA
e09ff79635
Update pins_RAMPS_13.h (PR#64)
...
Now all ramps configuration can enable Filament sensor not only EEB
2015-08-10 05:53:01 -05:00
Fourmi
e6aed7bb4e
Update thermistortables for Hisens Thermistor (PR#2588)
2015-08-09 18:11:14 -05:00
Richard Wackerbarth
9d8cc24abf
Continue from the line following the M999 (PR#60)
...
If the printer is going to accept the M999,
then it should continue from that line number.
2015-08-08 08:08:02 -05:00
wurstnase
f3ab1dba54
Z babystepping for coreXY (PR#47)
...
only X and Y were not implemented
2015-08-04 20:10:09 -05:00
Richard Wackerbarth
35afea1c0e
Restore test
...
PR#2572 Changed this because of faulty Boolean Logic
NOT(A OR (NOT B) OR (NOT C)) !=
(NOT A) AND ((NOT B) OR C))
Besides, the compiler should be smart enough to
optimize this without help from the programmer
2015-08-04 15:22:56 -05:00
Scott Lahteine
6af75f4b5d
Squish down deprecated tests in sanity check
2015-08-03 16:04:48 -05:00
Scott Lahteine
edeb58288e
Use PIN_EXISTS in sanity check
2015-08-03 16:04:48 -05:00
Scott Lahteine
c30b7693e0
Clean up RUMBA pins conditions
2015-08-03 16:04:48 -05:00
Scott Lahteine
46453905d6
Apply remaining ENABLED/DISABLED conditionals
2015-08-03 16:04:48 -05:00
Richard Wackerbarth
b227d8c128
Supply a VERSION in a short form for displays
...
The long descriptor will still be available in M115
2015-08-03 08:21:09 -05:00
Richard Wackerbarth
cd7828a928
This will be the 1.1.0 Release rather than 1.0.3
2015-08-03 08:08:38 -05:00
Richard Wackerbarth
4e2f5618c1
Pick up Default_version when needed
2015-08-03 08:08:37 -05:00
Richard Wackerbarth
329acc852e
Canonize Option flag USE_AUTOMATIC_VERSION
2015-08-03 08:08:37 -05:00
Richard Wackerbarth
5a11d32a85
Move deprecation test to SanityCheck.h
2015-08-03 08:08:37 -05:00
Richard Wackerbarth
7bb7a52940
Bring config up-to-date
2015-08-03 07:35:33 -05:00
AnHardt
244ea2014a
Boot-screen for text-displays improvements
...
Centred the logo for 16x4 and 20 x4.
Moved version to the bottom line
Code shrink to 704 bytes.
2015-08-03 07:13:00 -05:00
AnHardt
80f2a20842
Enable bootscreen in all Configurations
2015-08-03 07:13:00 -05:00
AnHardt
2684d061ed
Scroll too long strings on bootscreen
2015-08-03 07:13:00 -05:00
AnHardt
4f46df5dab
Make bootscreen configurable for the graphic displays
...
Saves about 473 byte of progmem and 28 bytes of RAM.
2015-08-03 07:13:00 -05:00
AnHardt
09571b7753
Boot-screen for the character displays
...
Uses about 488 byte of progmem and 32 byte of RAM.
For that configurable.
2015-08-03 07:13:00 -05:00
Richard Wackerbarth
866efc14fe
Add Danish translations
2015-08-03 07:06:17 -05:00
Scott Lahteine
267f3479d7
Adjust spacing in pins_RAMPS_13.h
2015-08-02 23:26:58 -05:00
Scott Lahteine
56702e7bb9
Define servo pins just like other pins
2015-08-02 23:26:58 -05:00
Richard Wackerbarth
4b9d5cd352
Use lowercase names for serial instances
2015-08-02 23:01:39 -05:00
Scott Lahteine
1e2deff4fd
Rename BTENABLED to BLUETOOTH
...
- For some reason it’s easy to forget what BT stands for, but it
doesn’t need an abbreviation.
2015-08-02 22:56:50 -05:00
Scott Lahteine
68055a5959
Include RIGIDBOT_PANEL in Conditionals
2015-08-02 22:26:41 -05:00
George Djabarov
f8ed3a835d
Added comment with the RigidBot Big bed size
2015-08-02 22:13:37 -05:00
George Djabarov
7deae6b6be
Updated RigidBot example configuration
...
- The default serial baud rate of 115200
- The regular RigitBot bed size 254mm/248mm/254mm
- Single stock extruder
- Stock termistors for extruder and hotbed
- Stock Min X/Y/Z stops. Max stops not connected
- Stock 32 teth tooleys (stock axis steps)
- No auto bed leveling
- No screen
2015-08-02 22:13:37 -05:00
Scott Lahteine
5418faa1f9
Add sanity checks for old names
2015-08-02 22:09:08 -05:00
Scott Lahteine
f03e063750
Rename BEEPER to BEEPER_PIN
...
For consistency with other pins, allowing use of `PIN_EXISTS` macro.
2015-08-02 22:09:08 -05:00
Scott Lahteine
270c766de2
SDCARDDETECT -> SD_DETECT, added docs
...
- `SD_DETECT_PIN` replaces `SDCARDDETECT`
- `SD_DETECT_INVERTED` replaces `SDCARDDETECTINVERTED`
- Revise the description of `SD_DETECT_INVERTED`
- Add a note about the override of `SD_DETECT_INVERTED` in
`Conditionals.h`
2015-08-02 21:59:41 -05:00
Scott Lahteine
496fc28dc3
Tweaks to pins comments
2015-08-02 21:34:13 -05:00
Scott Lahteine
8d3b74cc6e
Rename SDCARDDETECT to SDCARDDETECT_PIN
...
- Rename the pin so it can be tested with `PIN_EXISTS`
- Fix some incorrect tests for `SDCARDDETECT`
2015-08-02 21:34:13 -05:00
Scott Lahteine
0f5ada8cbd
Group the fail case in one negation (PR#2572)
2015-08-01 18:55:50 -05:00
AnHardt
7ddf1cda1d
Improve condition for SERVO_LEVELING (PR#2570)
2015-07-31 22:41:34 -05:00
Richard Wackerbarth
f32048b8f5
In for a penny, in for a pound
2015-07-31 17:13:53 -05:00
Scott Lahteine
e944f960de
Add a sanity check for old name "BEEPER"
2015-07-31 17:13:53 -05:00
Scott Lahteine
8ebf0b92be
Spacing adjustments in some pins files
2015-07-31 17:13:53 -05:00
Scott Lahteine
94a796c8cc
Rename BEEPER to BEEPER_PIN
...
For consistency with other pins, allowing use of `PIN_EXISTS` macro.
2015-07-31 17:13:53 -05:00
Richard Wackerbarth
b217474eab
Compiler Complaints about concatenated tokens (PR#2566)
2015-07-31 17:08:44 -05:00
Scott Lahteine
2460f82d8b
Make proper distinction between BEEPER and HAS_BUZZER
2015-07-31 01:24:33 -05:00
Scott Lahteine
58cfcd4239
Overridable Options - Part 5
...
Apply `ENABLED` / `DISABLED` macros to files needing only a small
number of changes.
2015-07-31 01:24:20 -05:00
Scott Lahteine
5e834352a9
Overridable Options - Part 11 (PR#2563)
...
Apply `ENABLED` / `DISABLED` macros to EEPROM-related files.
2015-07-31 01:07:04 -05:00
Scott Lahteine
bf6eb93c61
Overridable Options - Part 10 (PR#2562)
...
Apply `ENABLED` / `DISABLED` macros to planner files.
2015-07-31 01:06:29 -05:00
Scott Lahteine
51e89a269c
Overridable Options - Part 9 (PR#2561)
...
Apply `ENABLED` / `DISABLED` macros to temperature-related files.
2015-07-31 01:05:55 -05:00
Scott Lahteine
c35fb88094
Overridable Options - Part 8 (PR#2560)
...
Apply `ENABLED` / `DISABLED` macros to stepper-related files.
2015-07-31 01:05:22 -05:00
Scott Lahteine
0d8989fc14
Overridable Options - Part 7 (PR#2559)
...
Apply `ENABLED` / `DISABLED` macros to LCD-related files.
2015-07-31 01:04:37 -05:00
Scott Lahteine
b4abb0ae7f
Apply ENABLED / DISABLED to Marlin core files (PR#2558)
2015-07-31 01:03:58 -05:00
Scott Lahteine
c0d7ea3e7e
Overridable Options - Part 4 (PR#2556)
...
Apply `ENABLED` / `DISABLED` / `HAS_SERVOS` macros to pins files.
2015-07-31 00:44:53 -05:00
Scott Lahteine
4b40964064
Overridable Options - Part 3 (PR#2555)
...
Apply `ENABLED` / `DISABLED` macros to language-related files.
2015-07-31 00:19:13 -05:00
Scott Lahteine
32683b282b
Include configurator copies of configs
2015-07-31 00:03:36 -05:00
Scott Lahteine
37d1879386
Apply overridables to Configuration files
2015-07-31 00:03:36 -05:00
Scott Lahteine
9d151bb61b
servo_endstop_angles -> servo_endstop_angle
2015-07-30 23:35:57 -05:00
Scott Lahteine
9334479aeb
Minor cleanup of Conditionals.h
2015-07-30 23:35:57 -05:00
Scott Lahteine
1f63293624
servo_endstops -> servo_endstop_id
2015-07-30 23:35:57 -05:00
Scott Lahteine
edaaead7e0
Fix comment about SERVO_ENDSTOP_ANGLES
2015-07-30 23:35:57 -05:00
Scott Lahteine
ed4a6371ad
Add HAS_SERVO_ENDSTOPS to simplify conditonals
2015-07-30 23:35:57 -05:00
Scott Lahteine
70be61d416
Reset filament_size with a loop
2015-07-30 23:31:58 -05:00
Scott Lahteine
ae9274be05
Fix minor compiler warnings in for loops
2015-07-30 23:31:58 -05:00
Scott Lahteine
c7c8cfed6f
Complete M200 output with M503
...
- The contents of EEPROM include filament diameters even with
Volumetric disabled. This change makes `M503` display the full
volumetric settings so that playing back the output of `M503 S0` will
fully restore them.
2015-07-30 23:31:58 -05:00
Scott Lahteine
4a58e447a1
Add array size to servo_endstop_angles (PR#2553)
2015-07-30 23:27:38 -05:00
Andrew Lenharth
a0ae9e30df
don't pass integer by reference, inefficient. (PR#2547)
2015-07-30 17:51:12 -05:00
AnHardt
d03f037a92
Get rid of malloc() and free() (PR#2549)
...
Just the minimal changes to qr_solve.cpp and .h to get rid of malloc() and free().
Saves about 656 bytes of progmem (library-code)
and 22 bytes for static variables.
Should use exactly the same amount of stack as it did before on the heap.
2015-07-30 17:50:31 -05:00
Scott Lahteine
3b2b2313ff
Combine if block related to SERVO_ENDSTOPS
2015-07-30 16:39:05 -05:00
Scott Lahteine
0af2a80e06
Make SERVO_ENDSTOP_ANGLES 2-dimensional
2015-07-30 16:38:56 -05:00
Richard Wackerbarth
525d0dc239
Configurator is out-of-date AGAIN (PR#2550)
2015-07-30 16:36:01 -05:00
Richard Marko
dd22cbbfb8
makefile: add buzzer.cpp (PR#2479)
2015-07-30 07:56:44 -05:00
Scott Lahteine
9f48798ffd
Replace ENABLED with DEFINED for SERVO_ENDSTOPS (PR#2542)
2015-07-30 07:55:29 -05:00
Richard Wackerbarth
ae00fad75b
Rename as M100
2015-07-27 20:31:59 -05:00
Richard Wackerbarth
a401d738df
There is an echo in here
2015-07-27 20:31:59 -05:00
Richard Wackerbarth
ed7d45e8f5
Memory watcher
2015-07-27 20:31:59 -05:00
AnHardt
d17f7ebc8a
Multiply WATCH_TEMP_PERIOD by 1000UL (PR#2535)
...
instead of 1000. Else we get errors with times over 32 seconds.
2015-07-27 20:30:53 -05:00
Scott Lahteine
bea6739774
Don't include Z_RAISE_AFTER_PROBING if not used (PR#2527)
2015-07-27 20:24:33 -05:00
Scott Lahteine
81bba7ed88
More sanity checking for extruder requirements (PR#2531)
2015-07-27 10:14:43 -05:00
AnHardt
87a97f3724
Fix conditions for display strings
2015-07-26 20:41:21 -05:00
AnHardt
aaccea0260
Shift some display only strings from language.h to lenguage_en.h
...
and translate them to German.
2015-07-26 20:41:15 -05:00
Scott Lahteine
e4c01f1c7e
Simplify init with ARRAY_BY_EXTRUDERS1 macro (PR#2507)
2015-07-26 20:40:27 -05:00
Scott Lahteine
ab6f1fdf8b
Move & document ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED (PR#2528)
...
As suggested in #2521
- Move `ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED` because `SDSUPPORT` is
also required.
- Add a note that endstops must be enabled for the feature to have any
effect
2015-07-26 20:36:37 -05:00
Richard Marko
1183c10a2e
makefile: drop -q -q (much quiet) from avrdude flags
...
Annoying when trying to figure out if uploading
actually does something.
2015-07-26 20:31:31 -05:00
Richard Marko
0e064357f4
makefile: use /etc/avrdude/avrdude.conf on linux
...
No need to look for arduino specific avrdude configuration
as distributions ship their own avrdude.conf file that
is compatible with arduino.
2015-07-26 20:31:31 -05:00
Scott Lahteine
bcb7d5a149
Improve sanitycheck for TEMP_SENSOR_1
2015-07-25 21:17:36 -05:00
Scott Lahteine
5b24f59401
Add sanity checks for temp sensors
2015-07-25 21:17:36 -05:00
AnHardt
fd0e81b0c7
Distinguish between BUZZER and SPEAKER (PR#2513)
...
A speaker needs a AC or a pulsed DC to make a sound, a buzzer only needs a DC.
A buzzer has it's own resonator. It works in most cases to feed the buzzer with a pulsed DC, but the sound will not be as loud as with pure DC.
There seem to be boards where the BEEPER-pin is not able to handle a PWM. Obviously intended for a buzzer.
To make these board able to handle a speaker
* replace the PWM based tone()-function again with a on-delay-off-delay loop.
Hopefully the last time I touch the beeper code.
2015-07-24 22:10:04 -05:00
Scott Lahteine
e2957df05c
Shorthand for do_blocking_move_to
2015-07-24 22:07:41 -05:00
Scott Lahteine
819c5b9b50
Adjust comment on Z adjustment
2015-07-24 22:07:41 -05:00
Scott Lahteine
5a7356b6fc
Patch for G29 final Z position
...
Include all the necessary pieces to get the final Z position after
probing the bed, and add commentary about other possible changes.
2015-07-24 22:07:41 -05:00
AnHardt
088e09e052
Add forgotten Marlin_main.cpp
2015-07-24 22:04:49 -05:00
AnHardt
8b876241bd
Some more servo code tweaks
...
Just set up the pin. Don't move to a random position.
Simplify servo::move()
* servo::move() does not need the pin parameter - The pin is set during servo_init() with attach().
* servo::move() does not need a return value.
SERVO_LEVELING is the wrong condition to deactivate the servos.
Remove some temporary (Servo *) variables.
SanityCheck for the servo indexes.
2015-07-24 22:04:49 -05:00
Scott Lahteine
b116c096bd
Reduce set_homing_bump_feedrate, save 42 bytes (PR#2512)
...
Updates to `set_homing_bump_feedrate`:
- Move the string into Program Memory, reduce length by 31 bytes
- Use an auto to get the divisor, adjust it on error
- Set feedrate once, at the end
2015-07-24 22:00:25 -05:00
Scott Lahteine
f7e7862588
Better Sanguinololu & Graphical Controller (PR#2504)
...
- Change suggested at
https://github.com/MarlinFirmware/Marlin/issues/2482#issuecomment-123553
266
2015-07-23 23:47:07 -05:00
Scott Lahteine
a1154d4a20
Enable Y and sanity-check CoreXZ (PR#2509)
2015-07-23 23:46:27 -05:00
Scott Lahteine
932f1c109e
Move servos to the top in pins_MEGACONTROLLER.h
2015-07-23 22:51:41 -05:00
Scott Lahteine
90f8ddfc1e
Apply MINIPANEL to other configs
2015-07-23 22:51:41 -05:00
AndySze
00dbf69b6d
add MINIPANEL defines
2015-07-23 22:51:40 -05:00
AndySze
8ac5e56934
fixed some format problems and cleaned code
2015-07-23 22:51:40 -05:00
AndySze
eef595aa64
add makerlab mega controller pin configs
2015-07-23 22:51:40 -05:00
AnHardt
4e14e152fa
Add Travis tests for CORXY and COREXZ
2015-07-23 19:52:48 -05:00
AnHardt
27d7d2ccab
Correct bracketing for COREXY-XZ
2015-07-23 19:52:21 -05:00
Scott Lahteine
469843427d
Reduce code in gcode_M81 (PR#2497)
2015-07-23 08:14:00 -05:00
Scott Lahteine
c66955aaf9
Mark unchanging arrays as const (PR#2494)
...
The compiler may be able to optimize if it knows an array won’t be
changing.
2015-07-22 21:37:37 -05:00
Scott Lahteine
278aa15301
Add COUNT macro and apply
2015-07-22 18:16:05 -05:00
Scott Lahteine
d85861d296
Move macros, add ENABLED/DISABLED, add includes
2015-07-22 18:16:05 -05:00
Scott Lahteine
17960fd2b0
Neaten up pins_MEGATRONICS.h (PR#2493)
2015-07-22 17:23:22 -05:00
Scott Lahteine
aac2b9aa9d
Reduce code in gcode_M84 (PR#2492)
...
`gcode_M84` only needs to call `finishAndDisableSteppers`, which calls
all the other functions.
2015-07-22 17:22:01 -05:00
Scott Lahteine
4971fa73f9
Add a sanitycheck error for old servo settings (PR#2491)
...
- Documentation solution for #2476
2015-07-22 16:35:10 -05:00
Scott Lahteine
96ace72ddc
Servos attach/detach based only on servo config
...
Assuming #2470 fixed up the main issue.
2015-07-22 16:34:26 -05:00
Richard Wackerbarth
b80a6a8d31
Correct Kossel Pro Configuration_adv (PR#2473)
2015-07-22 16:32:08 -05:00
Scott Lahteine
000a6fce46
Extract update_endstops from stepper ISR (PR#2474)
2015-07-19 18:33:18 -05:00
Scott Lahteine
e83eac312e
Move plan_arc next to prepare_move
2015-07-19 16:18:46 -05:00
Scott Lahteine
5c5936508d
G2/G3 Arcs for Delta
...
- Update prepare_move_delta to take a target argument
- Add Delta support to plan_arc
2015-07-19 16:18:46 -05:00
Scott Lahteine
9f53e2f0c9
Implement COREXZ in stepper.cpp and planner.cpp
2015-07-19 16:17:03 -05:00
Scott Lahteine
fa00e1d97f
Explode conditions common to corexy and cartesian
2015-07-19 16:17:03 -05:00
Scott Lahteine
c7dd5527b4
Add a C_AXIS and Z_HEAD to support COREXZ
2015-07-19 16:17:03 -05:00
Scott Lahteine
129f986ccf
Add COREXZ option to configurations
2015-07-19 16:17:03 -05:00
Scott Lahteine
69b0490b77
Show minimal preheat options in menus (PR#2471)
2015-07-19 16:14:59 -05:00
Scott Lahteine
eacfe132aa
Change the name of servos[] and servo_t
2015-07-19 11:35:48 -07:00
Scott Lahteine
3b23ccd366
Patch servos code for move
...
- Have `Servo::attach` explicitly return -1 if it fails
- Check for -1 in `Servo::move` because `servoIndex` might be 0
- Make `attach` / `detach` calls conditional on `SERVO_LEVELING`
- Move `SERVO_LEVELING` define to `Conditionals.h`
2015-07-19 11:24:23 -07:00
Richard Wackerbarth
54ddc1d417
Simplify DRY RUN (PR#2358)
...
Elsewhere DRYRUN turns off the heating elements
and ignores constraints on them.
Here, whenever motion is entered into the planner,
if DRY RUN is set, we instantly act as if the E_AXIS
is in the desired final position.
2015-07-19 10:15:53 -05:00
Scott Lahteine
944090c19c
Optimize lsDive logic
2015-07-19 10:13:40 -05:00
Scott Lahteine
417706e578
Include space for the terminating nul in lsDive
2015-07-19 10:13:39 -05:00
Scott Lahteine
f3c1a6b19c
Reduce lsDive stack usage to the minimum
2015-07-19 10:13:39 -05:00
Patrick Bogen
fba4e6241b
Specify print format for reporting invalid tmp_extruder (PR#2465)
2015-07-18 16:40:01 -05:00
AnHardt
d15d869267
Rename axis_is_at_home() to set_axis_is_at_home() (PR#2464)
...
to make clear - it's not a question but an order.
2015-07-18 10:27:21 -05:00
Scott Lahteine
f209b755a5
Move the Z probe as far as needed to trigger the switch (PR#2461)
2015-07-16 20:02:44 -05:00
Scott Lahteine
0f1df62389
Fixup comments in code_seen
2015-07-16 16:40:52 -05:00
Scott Lahteine
2945eb6650
Call code_seen only once per parameter
2015-07-16 16:40:52 -05:00
Scott Lahteine
b742af2e2a
Move Y_STOP_PIN for Printrboard with SD (PR#2420)
2015-07-16 16:39:55 -05:00
Scott Lahteine
baa9199973
Define extern delta only for delta
2015-07-16 16:36:30 -05:00
Scott Lahteine
77e80ef367
Require extruders for thermal code
2015-07-16 16:36:30 -05:00
Scott Lahteine
3bde4f4855
Require temp sensor for bed thermal protection
2015-07-16 16:36:30 -05:00
Scott Lahteine
82a3ed2f9a
Cleanup and dev notes in Marlin.h
2015-07-16 16:36:30 -05:00
Scott Lahteine
db23b9b184
Minor tweak to M204 code (PR#2457)
2015-07-16 16:35:13 -05:00
Scott Lahteine
81d42406b7
Move braces in homeaxis to prevent a hanging else (PR#2451)
2015-07-16 10:25:54 -05:00
Scott Lahteine
552a327df8
Fix lsDive filename stack overrun (PR#2449)
2015-07-16 10:23:56 -05:00
AnHardt
a6628f12cc
Eliminate the further use of the pin-parameter
2015-07-15 20:50:58 -05:00
AnHardt
8504992e9f
Remove the additional pin variable in Servo.cpp
...
as sugested by @c-born
inhttps://github.com/MarlinFirmware/Marlin/issues/1885#issuecomment-92618240
2015-07-15 20:50:58 -05:00
AnHardt
ed6598adf5
Corrected Bed Height vs. Bed Topology for verbosity > 3
...
and cleaned out some tabs.
Everything else is a rebased PR#2017 as proposed by @CptanPanic
2015-07-15 19:51:40 -05:00
brian
62302ceb9e
Add calculation of difference between auto-correct bed level plane, and measured topo map.
2015-07-15 19:51:40 -05:00
Scott Lahteine
de25a48dec
Remove PID examples from preconfigured configs
2015-07-15 19:13:53 -05:00
Scott Lahteine
7456710a1f
Update configs formatting
2015-07-15 19:13:47 -05:00
Scott Lahteine
391386dd94
Update configs for new servo deactivation
2015-07-15 19:13:40 -05:00
AnHardt
5243d8b523
Deactivate DEACTIVATE_SERVOS_AFTER_MOVE by default
2015-07-15 17:39:43 -05:00
AnHardt
49609f6c14
Activate the new servo.move() function
...
by replacing the sequences (attach, write, delay, detach), and their conditions with the new function in Marlin.main.cpp
and removing the old configuration in the ABL part of Configuration.h
2015-07-15 17:39:43 -05:00
AnHardt
40b6edcad7
Introduce DEACTIVATE_SERVOS_AFTER_MOVE in Configuration.h
...
DEACTIVATE_SERVOS_AFTER_MOVE is ought to replace PROBE_SERVO_DEACTIVATION_DELAY.
But it will work on all servo moves, not only the probe servo moves.
2015-07-15 17:39:43 -05:00
AnHardt
2ddb2a2be9
Add Servo::move() to servo.cpp
...
move(pin, angel) - Sequence of attach(pin), write(angel),
if DEACTIVATE_SERVOS_AFTER_MOVE is defined waits SERVO_DEACTIVATION_DELAY, than detaches.
As we have jitter on the servos during moves of the steppers, and detaching them improves this behaviour,
the usual sequence to handle a servo movement is:
attach(pin)
write(angel)
delay(until the servo finished the move)
detache()
Here a function to handle the complete sequence.
2015-07-15 17:39:43 -05:00
mkile
8a01e5fb7a
Update Russian translation (PR#2443)
...
Slightly updated translation.
2015-07-15 10:35:36 -05:00
Richard Wackerbarth
e83575537a
Compiler defines USBCON for USB devices (PR#2433)
2015-07-15 10:32:11 -05:00
ayberkozgur
7268d46508
Always calculate extruder temperature PID d term (PR#2432)
2015-07-13 13:22:26 -05:00
Scott Lahteine
87a872e103
Use st_get_position_mm where possible (PR#2411)
2015-07-12 22:15:54 -05:00
Scott Lahteine
2e0da8abdc
Allow N to take a negative argument (PR@2402)
2015-07-12 22:14:25 -05:00
Scott Lahteine
447dbd6fa5
Add STEPPER_RESET_PIN support
2015-07-11 16:04:11 -05:00
Scott Lahteine
a0351bdb73
Remove STEPPER_RESET_FIX option
2015-07-11 16:04:11 -05:00
Scott Lahteine
6b1b8cb2b3
Also nullify spaces before the checksum asterisk (PR#2409)
2015-07-10 09:03:07 -05:00
Scott Lahteine
8e61314323
Use RIGIDBOT_PANEL for consistency with online docs
2015-07-09 11:36:46 -05:00
Scott Lahteine
4b204da3c1
Cleanup of pins_RAMPS_13.h
2015-07-09 11:36:46 -05:00
Scott Lahteine
536f86e896
RigidBot CONTROLLERFAN_PIN in Configuration_adv.h
2015-07-09 11:36:46 -05:00
Scott Lahteine
f068e46661
RigidBoard include for pins.h
2015-07-09 11:36:46 -05:00
Scott Lahteine
9ebcae496d
RIGIDBOARD / RIGIDPANEL
2015-07-09 11:36:46 -05:00
Scott Lahteine
c3c605c658
Move note about LiquidTWI2 to Configuration.h (PR#2406)
2015-07-09 05:33:17 -05:00
Scott Lahteine
4e9d658141
Prevent a hanging SERIAL_ECHO_START in M111
2015-07-07 06:59:10 -05:00
Scott Lahteine
bc0fdbe88e
Use SERIAL_EOL in SERIAL_PROTOCOLLN macros
2015-07-07 06:59:10 -05:00
Scott Lahteine
d78ebbc0e9
Remove unused MSG_OK_B and MSG_OK_T
2015-07-07 06:59:10 -05:00
Scott Lahteine
6b494c1535
Use disable_all_heaters in M111
2015-07-07 06:59:10 -05:00
Scott Lahteine
15190d40df
Add extra EOL after M111
2015-07-07 06:59:10 -05:00
AnHardt
0e1cf78f5c
Remove code for testing if probing range is too small (PR#2390)
...
becaue it is over-restrictive and superseeded by the now working tests
if the probe-recktangle can be reached. See iss#2366
2015-07-07 06:58:01 -05:00
AnHardt
d421f5250d
Correct the sign of zprobe_zoffset for G29 (PR#@391)
...
Sign flipped with #2167 .
See also comments
https://github.com/MarlinFirmware/Marlin/issues/2040#issuecomment-118568355
and following.
2015-07-07 06:55:33 -05:00
Scott Lahteine
52fcc743ab
Replace "target" with "destination" in M600 (PR#2374)
...
- Also fix a bug in `M600` where `Z_MAX_ENDSTOP_INVERTING` is being
used as the index into the `destination[AxisEnum]` array.
2015-07-04 05:55:25 -05:00
Scott Lahteine
a5033c3652
Enable LCD_PIN_RESET if it exists (PR#2375)
2015-07-04 05:53:22 -05:00
AnHardt
23c8c5348f
Z-height fix V2b (PR#2351)
...
here the other two occurences of `Z_PROBE_OFFSET_FROM_EXTRUDER` are
replaced with `zprobe_zoffset`.
2015-07-02 20:30:40 -05:00
Todd Swindoll
a111fbbd0a
z-probe offset fix (PR#2361)
...
verified via 1.0.2 tag that compiles by multiple people,
credit for the fix goes to paulusjacobus for the initial find and
sniffle for the correction so M851 works.
2015-07-02 20:28:07 -05:00
Scott Lahteine
42465ee444
Cleanup of comments & spacing
2015-06-28 08:20:28 -05:00
Scott Lahteine
9682ed455e
Fix comment on M83, add comment to prepare_move
2015-06-28 08:20:19 -05:00
Scott Lahteine
bb44fe17cf
Fix typo in buzzer.h endif (PR#2337)
2015-06-27 06:10:19 -05:00
AnHardt
36746143a1
Correct output of M48 (PR#2336)
...
n_samples is an uint8_t .
Got printouts like:
50 of 2 ...
2015-06-27 06:08:40 -05:00
Scott Lahteine
f6ca5a8da8
Allow "M110 N123" without a checksum
2015-06-26 18:13:54 -05:00
Scott Lahteine
aaad65ff5d
Include a comment documenting M110
2015-06-26 18:13:54 -05:00
Scott Lahteine
862c72b030
Put the mandatory test of gcode_N first
2015-06-26 18:13:54 -05:00
Scott Lahteine
30976f9773
Allow M110 to handle a second N argument
2015-06-26 18:13:53 -05:00
Scott Lahteine
d135b15bb8
Init all endstop bits to 0 (PR#2332)
2015-06-26 07:10:22 -05:00
Scott Lahteine
5ccb1c9e7d
Use millis for M600 audio feedback interval
2015-06-25 20:45:03 -05:00
Scott Lahteine
fb16a83b8a
Cleanup M600 documentation comments
2015-06-25 20:45:03 -05:00
Scott Lahteine
97ec224d72
Replace target with destination in M600
2015-06-25 20:45:03 -05:00
Scott Lahteine
4ce9ddbb74
Check the temperature before filament change
2015-06-25 20:45:03 -05:00
Jaime van Kessel
b8b5762e55
Update Ultimaker URL
2015-06-25 09:12:44 -05:00
Jaime van Kessel
d5bfbf5a59
Added correct dutch translation for calibrate.
2015-06-25 09:12:44 -05:00
Scott Lahteine
149c474e55
Updated Russian language (PR#2325)
...
Gleaned from
https://github.com/MarlinFirmware/Marlin/commit/4ac14a7e5fa8e6e395436664
8976eafd1ae220ae
2015-06-22 23:07:19 -04:00
AnHardt
722829b058
Move buzzing code to buzzr.h & buzzer.cpp (PR#2307)
...
at least the lcd independent part from Marlin_main.cpp.
2015-06-22 22:31:48 -04:00
AnHardt
c461975140
Rename and repair MELZI_1284 (PR#2301)
...
to MELZI_MAKR3D.
Fix for #2288
As the normal MELZI also can have a 1284.
2015-06-22 22:30:07 -04:00
schlotzz
1e9cf905c7
Enable ZigZag AutoBedLeveling on Deltas (PR#2273)
...
ZigZag has been disabled by fault due to do_topography_map
2015-06-15 20:26:25 -05:00
Scott Lahteine
ec93383ec8
Add SanityCheck for bed probe position settings (PR#2282)
2015-06-15 20:22:44 -05:00
Scott Lahteine
dc40a5f6e0
Patch up more outdated config lines
2015-06-15 20:20:32 -05:00
Scott Lahteine
98c9111a7d
Update delta configs with latest settings
2015-06-15 20:20:32 -05:00
Scott Lahteine
e6baf8afd9
Fix up allen key settings in delta configs
2015-06-15 20:20:31 -05:00
Scott Lahteine
3b293fc5d1
Move Delta settings lower in delta files
2015-06-15 20:20:31 -05:00
Scott Lahteine
df21857583
Move extruder offset settings next to extruders setting
2015-06-15 20:20:31 -05:00
Scott Lahteine
2dd1859247
Cleanup spaces and comments in configs and conditionals
2015-06-15 20:20:31 -05:00
Scott Lahteine
a274769f4f
Clean up spacing and comments
...
Also clean up some trailing spaces in a few other sources
2015-06-15 20:20:31 -05:00
Scott Lahteine
d3bce05d54
Fix up spacing for filament sensor values
2015-06-15 20:20:31 -05:00
Scott Lahteine
b4b10a57fe
Fix configurator section directives and values lists
2015-06-15 20:20:31 -05:00
Scott Lahteine
bba14dcbe6
Move Z Safe Homing point to the middle of the movement range
2015-06-15 20:20:31 -05:00
Scott Lahteine
318318b02f
Add pins_RAMPS_13_EFB.h to reduce redundancy
2015-06-15 20:17:09 -05:00
Scott Lahteine
346c8b339b
Remove a test from pins_RAMPS_13.h
...
- Add 3 new lines to `pins.h` to remove 2 redundant tests in
`pins_RAMPS_13.h`
2015-06-15 20:15:38 -05:00
AnHardt
b93cddfcc9
Add lost MKS_BASE to pins.h (PR#2297)
2015-06-15 10:23:46 -05:00
AnHardt
6ab7b560af
Rework buzzing (PR#2296)
...
by:
Moving HAS_LCD_BUZZ macro to Coditionals.h
Renaming HAS_LCD_BUZZ to HAS_BUZZER to make clear is has nothing to do with the lcd.
Removing the ULTRALCD condition.
Moving declaration of lcd_buzz() out of the ULTRA_LCD block in ultralcd.h
Moving definition of lcd_buzz() out of the ULTIPANEL block in ultralcd.cpp
Renaming lcd_buzz() to buzz() to make clear is has nothing to do with the lcd.
All buzzing code is now only dependent on the existence of a BEEPER-pin or the definition of a LCD_USE_I2C_BUZZER.
To do: Check the conditions for the BEEPER-pin in all pin-files.
2015-06-15 06:13:26 -05:00
Scott Lahteine
29122db2fa
Fix ULTRA_LCD spelling in HAS_LCD_BUZZ
2015-06-15 06:12:34 -05:00
Scott Lahteine
1d94d098bf
Formatting tweaks as part of fixing issue 1497
2015-06-14 19:57:27 -05:00
Scott Lahteine
e602c28ad9
Set auto fan pins to OUTPUT during init
...
Fixes the problem of these pins being left in INPUT state, as described
in #1497
2015-06-14 19:57:27 -05:00
Scott Lahteine
90f858aa85
Use translated strings for axis movement (PR#2280)
...
Suggest we use the translated strings here. They use (except for
German) the phrasing “Move X” instead of just the axis letter, but they
should fit the available space. The “Extruder” string would be the
same, except it will be translated.
2015-06-14 08:16:00 -05:00
Scott Lahteine
e2a4a83586
Don't re-apply Z_RAISE_BETWEEN_PROBINGS in probe_pt (PR #2281 )
2015-06-12 22:39:35 -05:00
Scott Lahteine
6b1b3adaf0
Consistent punctuation in SanityCheck errors (PR#2283)
2015-06-12 09:31:02 -05:00
MagoKimbra
eb81982fcd
Fix error next command in autotune (PR#2274)
...
Now send only temperature for T or B, but not send OK.
Host interprets the line to show the right temperature, but not in
response to M105 then stop and send commands until it ends the autotune.
2015-06-12 07:10:38 -05:00
AnHardt
55b23c896a
Optimise out_of_range_error() (PR#2265)
...
by avoiding the strncopy()
2015-06-12 02:20:40 -05:00
filipmu
b0860adab6
Fix volumetric multiplier display for filament sensor (PR#2264)
...
The volumetric multiplier display needs to be multiplied by 100 in order to make it an integer for display purposes.
2015-06-12 02:19:27 -05:00
AnHardt
45642b7fe8
Respect DISABLE_AXIS settings (PR#2216)
...
when DEFAULT_STEPPER_DEACTIVE_TIME is over
instead of simply turn off all.
2015-06-11 11:35:05 -05:00
wurstnase
c85a486445
make the dual z-endstop optional (PR#2277)
...
it's disabled by default
2015-06-10 15:45:59 -05:00
Scott Lahteine
962b107341
Prevent current_command_args from bypassing nul (PR#2270)
2015-06-09 16:07:10 -05:00
Richard Wackerbarth
06ae832276
Deprecate Support for Arduino IDE < 1.0.5
...
Note that newer versions of the IDE can still
be made to support compilation for the older boards.
2015-06-08 17:15:28 -05:00
Scott Lahteine
ff6081be3a
Parse N[0-9]+[ ]* differently (PR #2263 )
...
More general solution to skip N[0-9]+[ ]* in the parser as in #2218
2015-06-08 17:06:49 -05:00
Scott Lahteine
aad121864e
Include "Z" in M851 report
2015-06-08 05:09:27 -05:00
Scott Lahteine
96a3fba8ac
Reverse the sign of zprobe_zoffset
...
- When editing on the LCD, minus now means below the nozzle
- Stores the opposite sign in EEPROM, so bumped to “V20”
2015-06-08 05:09:27 -05:00
fmalpartida
f92907183c
Updated SAV MkI pin header.
2015-06-08 05:07:11 -05:00
Richard Wackerbarth
58941e543e
ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED removed
...
#defining something just to define something else doesn’t
make sense
If you want SDCARDDETECTINVERTED, just define it yourself.
If the previous code was intended to define, undefined and then again define the term, that code is improper.
2015-06-06 21:44:59 -05:00
CONSULitAS
788eb6e647
planner.cpp: remove tab
...
planner.cpp: single evil and hidden tab removed ♻️ 😏
2015-06-06 20:13:56 -05:00
CONSULitAS
3a5963c0e7
Configuration_adv.h: Add FAN_MIN_PWM for slow fan stopping issue …
...
* all Configuration_adv.h: Add #define FAN_MIN_PWM for slow fan stopping
issue
* for K8200: uncommented with tested (and working) values
2015-06-06 20:13:56 -05:00
CONSULitAS
e55e65d1e4
planner.cpp: Add FAN_MIN_PWM for slow fan stopping issue …
...
@CONSULitAS
planner.cpp: Add FAN_MIN_PWM for slow fan stopping issue (V2.1 with
macro and linear scaling)
@thinkyhead thanks for idea on linear scaling
2015-06-06 20:13:56 -05:00
paclema
8d295547be
* Auto filament change on CHANGEFILAMENT feature. Now you can activate this option that extrude filament until you press the button.
2015-06-06 19:45:45 -05:00
atfield90
6d0e91328d
Renamed Board_megatronics_1 to Board_minitronics
2015-06-06 18:59:04 -05:00
atfield90
c4a2e5ac23
Renamed Pins_megatronics_1 to Pins_minitronics
2015-06-06 18:59:04 -05:00
atfield90
2076906aaa
Renamed Pins_megatronics_1 to Pins_minitronics
2015-06-06 18:59:04 -05:00
tonokip
10733a2bb0
added minirambo pin definitions. V2
2015-06-06 18:37:58 -05:00
Richard Wackerbarth
303d47228e
Define Probe Path in new format
2015-06-06 17:48:27 -05:00
Richard Wackerbarth
ad09d6a60f
3 Step Allen Key Probe
2015-06-06 17:48:27 -05:00
Richard Wackerbarth
8359cdf01d
Check compatibility for Teensy-based processor
...
The instruction say to set a #define in fastio.h
However, that value is not included before this test.
2015-06-06 17:24:34 -05:00
Ed Boston
08968c29bb
Adding ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED to Examples
2015-06-06 16:40:32 -05:00
Ed Boston
fed18bcc20
Removed SDSLOW for ELB_FULL_GRAPHIC_CONTROLLER
...
Hardware changes has removed the need for this option.
2015-06-06 16:40:32 -05:00
Ed Boston
b94a0e1501
Added ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED
...
The new define allows the sd card detect to be inverted or not from
Configuration.h
2015-06-06 16:40:31 -05:00
Ed Boston
bc205c76a3
SDCARDDETECTINVERTED problems
...
Fixed an error where SDCARDDETECTINVERTED was being defined/undefined
improperly
2015-06-06 16:40:31 -05:00
AnHardt
e400fce271
Merge pull request #2221 from MagoKimbra/Dryrun
...
Insert Debug DRYRUN Repetier Host compatible
2015-06-03 12:30:48 +02:00
AnHardt
163a9ff58e
Merge pull request #2230 from AnHardt/psm
...
Fix thermal protection state machine target temp. V2
2015-06-03 09:46:53 +02:00
AnHardt
c3fe6e61ae
Merge pull request #2229 from AnHardt/position-out-of-range
...
Fix out_of_range_error()
2015-06-03 09:46:22 +02:00
MagoKimbra
4db8d2def4
Moved MSG_DEBUG in language.h
2015-06-03 08:18:27 +02:00
AnHardt
b7e9ba7591
Back to 1.0.3 dev - for now
2015-06-03 00:47:11 +02:00
AnHardt
d1f4471000
Merge pull request #2146 from Wackerbarth/Versioning
...
Versioning
2015-06-02 18:31:21 +02:00
AnHardt
b1404a0743
fix thermal protection state machine target temp. V2
...
If the target temperature is changed then it would always stay in the reset state.
Thanks to @tonokip.
Replaces #2119
2015-06-02 12:26:21 +02:00
AnHardt
17b0ec84ed
Fix out_of_range_error()
...
For sprintf_P() the first parameter has to be a `char*` not `const char*`.
2015-06-02 11:50:32 +02:00
AnHardt
35af5ef23e
Merge pull request #2225 from Wurstnase/naming
...
consistency name for multiplier
2015-06-02 10:18:22 +02:00
wurstnase
e7e964432b
consistency name for multiplier
...
replace extruder_multiply with extruder_multiplier
like feedrate_multiplier or volumetric_multiplier
2015-06-01 22:33:22 +02:00
AnHardt
d4c6fc5d0a
Merge pull request #2223 from AnHardt/dualz-semicolon
...
Add a semicolon to make Z_DUAL_STEPPER_DRIVERS compile again.
2015-06-01 20:15:55 +02:00
AnHardt
0d9d21d15f
Add a semicolon to make Z_DUAL_STEPPER_DRIVERS compile again.
2015-06-01 19:51:43 +02:00
MagoKimbra
76306f9073
Insert Debug DRYRUN Repetier Host compatible
2015-06-01 18:34:45 +02:00
MagoKimbra
881146bc22
Fix problem Width Cura
2015-06-01 17:25:32 +02:00
fmalpartida
11e3f3375d
Merge commit '764e61708b8e73410c7819d59c4970d7089ca6f5' into bugFixing
...
Updated LCD wiki location.
2015-05-31 21:20:26 +02:00
Alexey Shvetsov
a8670b66a7
Update ru translation
...
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
2015-05-31 20:09:10 +03:00
fmalpartida
93da52d011
Added support for OLED SSD1306 I2C based LCDs.
2015-05-31 18:53:29 +02:00
Wurstnase
9c09967803
Merge pull request #2149 from Wurstnase/enstop_bits
...
faster compare
2015-05-31 16:02:55 +03:00
wurstnase
0f3f7d6835
clean up double endstops
2015-05-31 14:06:13 +02:00
AnHardt
9d2a980bcf
Merge pull request #2170 from thinkyhead/beep_M600_elsewise
...
Slight size reduction by adding idle()
2015-05-30 12:42:32 +02:00
AnHardt
2728dc0606
Merge pull request #2194 from thinkyhead/reduce_strings
...
Redo "invalid extruder" to save 304 bytes
2015-05-30 11:05:08 +02:00
Scott Lahteine
be5236e839
Reduce setTargetedHotend by removing the switch
2015-05-29 18:03:58 -07:00
Scott Lahteine
06f401e7e5
Redo "invalid extruder" to save 264 bytes
...
- Use `setTargetedHotend` in `M200`, as with other commands that use
`T` for the extruder
- Synthesize the "invalid extruder" message, obviating several long
strings
2015-05-28 22:25:28 -07:00
Scott Lahteine
1a882bcc2e
Merge pull request #2193 from thinkyhead/ignore_unrecognized_commands
...
Ignore unknown commands if they start with G, M, or T
2015-05-28 22:03:48 -07:00
Scott Lahteine
a672872717
Merge pull request #2187 from AnHardt/MAX6675M105
...
Print active extruder with M105 for MAX6675
2015-05-28 18:12:48 -07:00
Scott Lahteine
9beed830eb
Drop commented code_is_good lines
2015-05-28 17:53:47 -07:00
Scott Lahteine
068d4a1eb2
Ignore unknown commands if they start with G, M, or T
2015-05-28 17:44:09 -07:00
Scott Lahteine
5824f613ff
Merge pull request #2185 from jothan/bed_integral
...
Separate the maximum integral power for the bed from PID_INTEGRAL_DRI…
2015-05-28 16:32:02 -07:00
Scott Lahteine
c5c9d12630
Merge pull request #2183 from AnHardt/displayinit
...
Initialize the display earlier
2015-05-28 16:29:18 -07:00
Scott Lahteine
ef4becc413
Merge pull request #2188 from AnHardt/FtoN
...
Replace MSG_F? with MSG_N?
2015-05-28 16:18:50 -07:00
Scott Lahteine
0564625757
Update M33 for new gcode parser
2015-05-28 14:17:39 -07:00
AnHardt
f18f689c01
Replace MSG_F? with MSG_N?
...
To avoid double definitions.
I prefer to read N for Number not for Nozzle.
2015-05-28 20:30:23 +02:00
AnHardt
af7e3f5076
Print active extruder with M105 for MAX6675
...
Was omitted when T0 is a MAX6675.
2015-05-28 19:03:16 +02:00
Jonathan Bastien-Filiatrault
d46d9d998e
Add maximum bed integral term in example configurations.
2015-05-28 12:51:37 -04:00
Jonathan Bastien-Filiatrault
e86f2342c0
Separate the maximum integral power for the bed from PID_INTEGRAL_DRIVE_MAX / PID_MAX.
...
My PID_INTEGRAL_DRIVE_MAX was at 96, which was insufficient for my bed
to reach its intended temperature. The head requires a low maximum power since
I run on 24 volts and it has a somewhat low thermal mass.
2015-05-28 11:48:04 -04:00
AnHardt
f0523b5816
Initialize the display earlier
...
to have it ready to display errors during (temperature)-setup.
2015-05-28 16:08:17 +02:00
Scott Lahteine
790c697c19
Fix DEGREES macro
2015-05-28 00:19:48 -07:00
Scott Lahteine
76b4678f99
Merge pull request #2171 from thinkyhead/gcode_110_is_good
...
M110 is a known command
2015-05-26 21:17:58 -07:00
Scott Lahteine
03d5709b09
M110 is a known command
...
- The command parser now displays “unknown command” in more cases.
Known commands must be added to the `switch` inside `process_commands`
to suppress the error.
2015-05-26 20:31:18 -07:00
Scott Lahteine
d76a01194d
Slight size reduction by adding idle()
2015-05-26 20:08:21 -07:00
Richard Wackerbarth
2deb5a8ac5
Temporary Hack
...
REVERT THIS CHANGE
In proper use, we want to force the vendor to update this file to reflect distribution parameters
However, until most users have converted to automatic versioning,
we “grant them a pass”
2015-05-25 15:54:08 -05:00
Richard Wackerbarth
b5743d6927
Use SOURCE_CODE_URL rather than FIRMWARE_URL
2015-05-25 15:53:34 -05:00
Richard Wackerbarth
5ea139fd79
Revised Versioning mechanism
2015-05-25 15:53:14 -05:00
AnHardt
da246f5cb1
Activate BED_MINTEMP error.
...
And call _temp_error() directly for ERR_MAXTEMP_BED to avoid the only one time use of bed_max_temp_error().
Includes #2156 .
2015-05-25 13:23:19 +02:00
AnHardt
959da98d8e
Call kill() only once when triggered by a temperature error
...
to avoid stack overflow when called from interrupt.
Some clean up for calls of disable_all_heaters().
'disable_all_heaters()' is called in kill() and again when 'killed' is already set inside _temp_error().
2015-05-25 12:44:03 +02:00
Scott Lahteine
68f6f149d0
Reduce code size with out_of_range_error function
...
- Affects code size when automatic bed leveling is enabled
2015-05-24 20:18:02 -07:00
wurstnase
94120740d8
faster compare
...
!(~(ab)&0x3) and ab == 0x3 are equal
2015-05-23 07:55:15 +02:00
Scott Lahteine
c9141e604a
Merge pull request #2145 from thinkyhead/gcode_folding
...
Indentation in process_commands
2015-05-22 18:47:37 -07:00
Scott Lahteine
b55f8718c3
Indent G90/G91, G92
2015-05-22 17:34:08 -07:00
Scott Lahteine
b0d520b109
Indent G30, G31/G32
2015-05-22 17:33:17 -07:00
Scott Lahteine
ffe27a6225
Indent G29
2015-05-22 17:32:46 -07:00
Scott Lahteine
86083badc2
Indent G4, G10/G11, G28
2015-05-22 17:32:27 -07:00
Scott Lahteine
47d7a9cb5e
Indent G2/G3
2015-05-22 17:31:38 -07:00
Scott Lahteine
350f239d84
Indent G0/G1
2015-05-22 17:31:24 -07:00
Scott Lahteine
672b0c1fd3
Cleanup pins in RAMPS_13_EFB boards
2015-05-22 16:20:54 -07:00
Scott Lahteine
15a2351675
No need for +1 on initial seen_pointer
2015-05-22 15:31:30 -07:00
Scott Lahteine
550dd87b2a
Set seen_pointer before calling code_value
2015-05-22 15:11:48 -07:00
Scott Lahteine
38cc0b93c6
Merge pull request #1874 from AnHardt/Bulgarian
...
Introduction of Bulgarian - language_bg.h
2015-05-22 13:59:50 -07:00
Scott Lahteine
04a1622172
Merge pull request #2127 from Wackerbarth/Kossel_Pro
...
Kossel Pro
2015-05-21 18:43:26 -07:00
Scott Lahteine
81c2ca3e10
Merge pull request #2131 from thinkyhead/bq_is_ramps_13_efb
...
Witbox and Hephestos are RAMPS EFB
2015-05-21 18:39:02 -07:00
Scott Lahteine
f919a2fed1
Merge pull request #2134 from AnHardt/preheat-all
...
Shift call of start_watching_heater() into setTargetHotend()
2015-05-21 18:36:28 -07:00
Scott Lahteine
063881b5bd
Fix a couple of doubled semicolons
2015-05-21 18:15:29 -07:00
AnHardt
94dff5b36a
Merge pull request #2137 from thinkyhead/tweak_swh
...
Move millis call in start_watching_heater
2015-05-22 02:02:07 +02:00
Scott Lahteine
70d2f48d4e
Merge pull request #2136 from thinkyhead/M303_suppress_error
...
Suppress the line mismatch error after M303
2015-05-21 16:46:30 -07:00
AnHardt
0c0ace2a04
Remove start_watching_heater() fom M104 and M109
2015-05-22 01:44:50 +02:00
Scott Lahteine
00716d0ca0
Small start_watching_heater adjustment
2015-05-21 16:44:49 -07:00
Scott Lahteine
834747deb7
Merge pull request #2135 from Wurstnase/new_endstop_bits
...
new endstop bits
2015-05-21 16:35:54 -07:00
Scott Lahteine
bde9c70d42
Suppress the line mismatch error after M303
2015-05-21 16:27:22 -07:00
Scott Lahteine
50bd7493cc
Merge pull request #2108 from thinkyhead/m33_long_filename_host_support
...
M33 LONG_FILENAME_HOST_SUPPORT
2015-05-21 16:22:47 -07:00
Scott Lahteine
4d11b29959
Merge pull request #2113 from thinkyhead/command_sanitizer
...
Command sanitizer
2015-05-21 16:21:58 -07:00
wurstnase
ff98b8632b
new endstop bits
2015-05-21 23:16:43 +02:00
AnHardt
9b0fa9c309
Changed dependency of start_watching_heater() in setTargetHotend() to THERMAL_PROTECTION_HOTENDS
2015-05-21 21:07:37 +02:00
AnHardt
bc0764894a
Shift call of start_watching_heater() into setTargetHotend()
...
to warrant watching is set or reset.
Make setTargetBed() in _lcd_preheat() dependant of TEMP_SENSOR_BED.
Use disable_all_heaters() in lcd_cooldown() and abort_on_endstop_hit.
2015-05-21 20:36:11 +02:00
Richard Wackerbarth
b878bc5620
Introducing the Kossel Pro Build Configuration
2015-05-21 11:47:34 -05:00
Richard Wackerbarth
1d8f61ca8a
AT90USB is defined in pins.h
2015-05-21 11:46:54 -05:00
Richard Wackerbarth
735bf2d35f
Describe Custom M Code
2015-05-21 08:06:33 -05:00
Scott Lahteine
f39658c822
M120 and M121 are reversed
2015-05-21 00:17:44 -07:00
Scott Lahteine
6eb4f90ce7
Also synchronize configurator copies of configs
2015-05-20 21:34:00 -07:00
Scott Lahteine
9d1961ebe3
Witbox and Hephestos are just RAMPS_13_EFB
2015-05-20 21:33:23 -07:00
AnHardt
4422365a53
Merge branch 'Development' of https://github.com/MarlinFirmware/Marlin into _temp_error
2015-05-20 23:34:39 +02:00
AnHardt
4113762062
Merge pull request #2130 from AnHardt/kill2
...
Add a string parameter to kill()
2015-05-20 23:32:51 +02:00
AnHardt
89d2ee6f13
Make output on display dependant of ULTRA_LCD
2015-05-20 22:03:16 +02:00
AnHardt
120d4c7a8c
Merge remote-tracking branch 'origin/kill2' into _temp_error
2015-05-20 21:25:32 +02:00
AnHardt
cb6e82dc60
Change from kill() to kill(const char *)
...
in temperature.cpp
2015-05-20 21:22:48 +02:00
AnHardt
9d13942278
Use new kill() with parameter.
2015-05-20 21:18:52 +02:00
AnHardt
6398c5e28d
Merge remote-tracking branch 'origin/kill2' into _temp_error
2015-05-20 21:08:19 +02:00
AnHardt
f4a93ed997
Add a string parameter to kill()
...
Makes the output on the LCD adjustable.
2015-05-20 20:53:48 +02:00
AnHardt
2990c6c45f
Use new kill_() for _temp_error()
...
instead of stop(). We really want to require a reset and no chance to set a new temperature.
2015-05-20 14:03:14 +02:00
AnHardt
9b8c6ed254
Merge pull request #2120 from chris-bo/dogm_config
...
move dogm font selection to configuration_adv.h
2015-05-20 10:11:34 +02:00
AnHardt
06513565e9
Merge pull request #2105 from eboston/Development
...
Add ELB_FULL_GRAPHIC_CONTROLLER with ADAFRUIT_ST7565 display.
2015-05-20 09:56:21 +02:00
Ed Boston
082ed3beed
Propagate Configuration.h changes
...
Updated all the example Configuration.h files for the new display type.
2015-05-19 14:04:57 -07:00
Ed Boston
152b681bb5
Added link to controller github
...
Added the link to the github information about the
ELB_FULL_GRAPHIC_CONTROLLER
2015-05-19 04:14:55 -07:00
AnHardt
995b84944b
Merge pull request #1982 from CONSULitAS/Development_Update_language.h
...
language.h: update documentation / URL für K8200
2015-05-19 12:13:35 +02:00
Scott Lahteine
7bc5fd8193
Merge pull request #2123 from AnHardt/Duemilanove
...
Remove Duemilanove
2015-05-18 20:36:05 -07:00
Scott Lahteine
94de1e0d93
Merge pull request #2116 from AnHardt/wording
...
transpire -> expire
2015-05-18 20:34:46 -07:00
AnHardt
4d4fa3607b
Remove Duemilanove
...
No way to fit Marlin into 32K.
2015-05-19 02:46:37 +02:00
AnHardt
e353d27430
Merge branch 'Development' of https://github.com/MarlinFirmware/Marlin into Bulgarian
2015-05-18 23:56:53 +02:00
Ed Boston
ca8d1756d5
Define fixes
...
Fixed a couple defines that were not changed or commented out.
2015-05-18 14:23:31 -07:00
CONSULitAS
b96b28b7cc
language.h: update documentation for LANGUAGE_INCLUDE
...
language.h: update documentation for LANGUAGE_INCLUDE
@thinkyhead What do you think? I think there should be a warning like
this.
2015-05-18 23:11:26 +02:00
Christian Bohn
258bcdefe0
move dogm font selection to configuration_adv.h
2015-05-18 22:54:53 +02:00
AnHardt
7750180c93
transpire -> expire
...
Minor wording correction.
2015-05-18 21:48:10 +02:00
AnHardt
70163dafb9
Use _temp_error() for all errors thrown by different mechanisms
...
Now ending in an endless loop.
Tidy up the output format.
We now get:
ERRORTEXT ", system stopped! Heater_ID: " HEATERID
Where ERRORTEXT can be:
"Heating failed"
"Thermal Runaway"
"MAXTEMP triggered"
"MINTEMP triggered"
and soon
"Thermal Jump"
HEATERID can be
0, 1, 2 ,3 , "bed"
This messages are always followed by the common:
"Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
2015-05-18 20:26:25 +02:00
Scott Lahteine
a0f362c735
Simplify & optimize with current_command_args
2015-05-18 07:08:04 -07:00
Scott Lahteine
adc8fcb77f
More parser comments, optimize code_seen, save with goto
2015-05-18 07:08:04 -07:00
Scott Lahteine
c6d8dd19d9
use fetched value
2015-05-18 07:08:04 -07:00
Scott Lahteine
1116e13f5a
Further optimization of command parser
2015-05-18 07:08:03 -07:00
Scott Lahteine
3a4c3ab76e
Pre-sanitize the command before handling
...
- Use a global pointer for the current sanitized command
- Pre-sanitize the current command to bypass `N` and nullify `*`,
removing the need for handlers to bypass, ignore, or nullify these
parts, and reducing overhead for `code_seen`, etc.
- Pre-skip leading whitespace.
- Only look for G, M, T codes at the start of the command.
- Verify that G, M, T codes are followed by command codes.
2015-05-18 07:06:51 -07:00
Ed Boston
a83bf18ee1
More functional seperation
...
Moved SDCARDDETECTINVERTED and SDSLOW to Conditionals.h.
Added U8GLIB_LM6059_AF to define display specific actions.
Added reminder to compile in u8glib
2015-05-18 05:37:46 -07:00
AnHardt
97ca1b3f4d
Name magic value 20 to MAX_OVERSHOOT_PID_AUTOTUNE
...
to make it better findable.
2015-05-18 14:15:29 +02:00
Scott Lahteine
0f2c9bacfd
M33 LONG_FILENAME_HOST_SUPPORT
2015-05-17 17:36:32 -07:00
Scott Lahteine
3feaef6526
Have G92 set the nozzle position on Delta and SCARA
2015-05-17 17:08:05 -07:00
Ed Boston
047e688e93
Changed ADAFRUIT_ST7565 to ELB_FULL_GRAPHIC_CONTROLLER
...
Rename of define to avoid confusion between the controller and the
display which had similar names.
2015-05-17 15:23:17 -07:00
Ed Boston
1999ac415c
Formatting Changes
...
Fixes for some code formatting changes and commenting out the
ADAFRUIT_ST7565 define that was left defined.
2015-05-17 13:39:24 -07:00
Ed Boston
41f8cdb3a6
ADAFRUIT_ST7565
...
Added support for new display type
2015-05-17 12:47:41 -07:00
wurstnase
21ff773832
rework out_bits
2015-05-17 14:33:09 +02:00
Scott Lahteine
6c27eaf864
Merge pull request #2101 from thinkyhead/code_style
...
Code style and a dangling "else"
2015-05-17 03:39:08 -07:00
Scott Lahteine
d580a0d186
Use "+=" in plane rotation
2015-05-17 01:51:14 -07:00
Scott Lahteine
2f3a410cb0
Fix a potential hanging "else" bug
2015-05-17 01:50:30 -07:00
Scott Lahteine
b83e3f0905
Combine "Bed X: " strings
2015-05-17 01:49:52 -07:00
Scott Lahteine
7dfb8becdb
Adjust some names and types in Marlin_main.cpp
2015-05-17 01:48:51 -07:00
Scott Lahteine
c966aa26ff
Comments in Marlin_main.cpp
2015-05-17 01:47:53 -07:00
Scott Lahteine
c54a2ea042
Adjust spacing in Marlin_main.cpp and stepper.*
2015-05-17 01:47:02 -07:00
Scott Lahteine
072625ccad
Update headings in Marlin_main.cpp and stepper.cpp
2015-05-17 01:44:53 -07:00
Scott Lahteine
16032f149f
Rename to codenum as a consistency
2015-05-16 23:17:35 -07:00
Scott Lahteine
273a4a253f
Merge pull request #2096 from thinkyhead/cherry_picking3
...
Hide M117 with no LCD
2015-05-16 21:10:28 -07:00
Scott Lahteine
64825a3d1e
Merge pull request #2095 from thinkyhead/cherry_picking2
...
Add gcode_line_error to reduce code size
2015-05-16 21:09:15 -07:00
Scott Lahteine
ca79282eaf
Hide M117 with no LCD
2015-05-16 20:59:04 -07:00
Scott Lahteine
ce218cafdb
Add gcode_line_error to reduce code size
2015-05-16 20:54:58 -07:00
Scott Lahteine
46d59784ad
Rename preocess_command to process_next_command
2015-05-16 20:47:40 -07:00
Scott Lahteine
513077c317
Minor change to fan kick
2015-05-16 19:42:28 -07:00
Scott Lahteine
76438195f0
NO_TIMEOUTS and ADVANCED_OK off by default
2015-05-16 02:47:20 -07:00
Scott Lahteine
d2563804c8
Add LF to file errors
2015-05-15 04:37:22 -07:00
Scott Lahteine
e114662cfa
Adjust SdBaseFile spacing
2015-05-15 03:23:49 -07:00
Scott Lahteine
98e91f5253
Allow lsDive to recurse with minimal stack usage
2015-05-15 03:19:07 -07:00
Scott Lahteine
19166a92e4
Merge pull request #2057 from Wurstnase/serial_wait
...
add plan buffer remaining for 'P' and block buffer remaining 'B'
2015-05-14 04:57:08 -07:00
Scott Lahteine
95f5a68006
Merge pull request #2074 from thinkyhead/lcd_xyz_unknown
...
Display unknown XYZ on the LCD as "---"
2015-05-14 04:56:38 -07:00
Scott Lahteine
e97fcafd0e
Merge pull request #2076 from thinkyhead/mendel_inverting
...
Use MSG_OK in M105
2015-05-14 04:54:11 -07:00
Scott Lahteine
0f6cd3640b
Drop extraneous ok_to_send
2015-05-14 04:38:09 -07:00
Scott Lahteine
0ce355d9e7
Use MSG_OK in M105
2015-05-14 03:33:38 -07:00
Scott Lahteine
a366e57385
Merge pull request #2075 from thinkyhead/mendel_inverting
...
Use Mendel default for INVERT_Y_DIR
2015-05-14 03:29:24 -07:00
Scott Lahteine
7b3acfbb6f
Merge pull request #2072 from thinkyhead/better_arc_code
...
Consolidate arc code, remove motion_control.*
2015-05-14 00:27:22 -07:00
Scott Lahteine
78beef2d73
Use Mendel default for INVERT_Y_DIR
2015-05-14 00:25:47 -07:00
Scott Lahteine
1a4a09c26f
Display unknown XYZ on the LCD as "---"
...
- Also show 2 digits past decimal for Z on DOGM
2015-05-13 22:45:58 -07:00
Scott Lahteine
68ce419147
Note on segment size
2015-05-13 19:11:36 -07:00
Scott Lahteine
8b92249f18
Bring arc_offset into auto scope
2015-05-13 19:00:46 -07:00
Scott Lahteine
80807b2d71
Consolidate arc code, remove motion_control.*
2015-05-13 18:52:41 -07:00
Scott Lahteine
f65833931d
Formatting tweaks
2015-05-13 02:02:19 -07:00
Scott Lahteine
fcfd99c1ae
Add comments to lcd_control_temperature_menu
2015-05-12 18:46:16 -07:00
Scott Lahteine
d693e0f378
Use WATCH_TEMP_INCREASE + TEMP_HYSTERESIS + 1 as difference limit
2015-05-12 18:30:38 -07:00
Scott Lahteine
6697a8f375
Watch the heater a little longer
2015-05-12 18:22:47 -07:00
Scott Lahteine
5693a6e3c9
Fix heating error message
2015-05-12 18:17:13 -07:00
Scott Lahteine
747fd5801c
Merge pull request #2055 from thinkyhead/thermal_unified
...
Combine thermal runaway and watch-period
2015-05-12 08:04:29 -07:00
Scott Lahteine
6e5572228d
Merge pull request #2064 from thinkyhead/wait_before_g28
...
Split up prepare_move by type
2015-05-12 07:53:11 -07:00
Scott Lahteine
27ad381e25
Allow fractional seconds in G4 and M0
2015-05-12 07:52:08 -07:00
Scott Lahteine
5146694452
Merge pull request #1884 from shaggythesheep/feature_new_board_ramps_cnc_controller
...
Feature: Add RAMPS CNC Controller Board
2015-05-12 04:31:49 -07:00
Scott Lahteine
b2bd9aae7c
SCARA_SEGMENTS_PER_SECOND
2015-05-12 04:18:15 -07:00
Scott Lahteine
bd20bd5444
Merge pull request #2063 from chris-bo/autobed_sled
...
improve sled handling
2015-05-12 03:29:21 -07:00
Scott Lahteine
9e95ceb3fc
Split up prepare_move by type
...
- For better encapsulation add inlines for each prepare_move type
- Move controllerFan vars inside the function as statics
- Some formatting cleanup
- Rename `ClearToSend` as `ok_to_send`
2015-05-12 02:08:20 -07:00
Scott Lahteine
9ba8cf5fe3
Merge pull request #2061 from thinkyhead/wait_before_g28
...
Always do st_synchronize() before G28
2015-05-12 02:05:30 -07:00
Scott Lahteine
873f7d6f2a
Check that configs are up-to-date
2015-05-12 01:33:51 -07:00
Christian Bohn
f48599f172
add pin definition to some motherboards
2015-05-12 10:02:23 +02:00
Scott Lahteine
b5200e184c
Remove extra setup_for_endstop_move
2015-05-12 01:01:53 -07:00
Scott Lahteine
8d814de558
Return void in prevent_dangerous_extrude
2015-05-12 00:55:00 -07:00
Scott Lahteine
367e2eb9f4
Global setup_for_endstop_move
2015-05-12 00:51:22 -07:00
Wurstnase
1d5677cc3b
add missing Z-bits
2015-05-12 09:36:19 +02:00
Wurstnase
df12e68e7d
add missing Z_PROBE-bit
2015-05-12 09:33:24 +02:00
Scott Lahteine
fa951f8a0b
Always do st_synchronize() before G28
2015-05-12 00:31:51 -07:00
Christian Bohn
27a3b1d895
disable sled pin by default
2015-05-12 08:51:01 +02:00
Christian Bohn
fb44b53ae3
sled improvements
...
- create sled pin definition
- G28 Works with sled
2015-05-11 23:22:19 +02:00
Wurstnase
46d1932380
add plan buffer remaining for 'P' and block buffer remaining 'B'
2015-05-11 13:04:00 +02:00
Scott Lahteine
429c6ccad2
Neaten config formatting
2015-05-10 23:27:00 -07:00
Scott Lahteine
8a0dc4d54a
Merge pull request #1922 from Wurstnase/serial_wait
...
Serial wait
2015-05-10 23:10:25 -07:00
Scott Lahteine
8332a15899
Fix testing of runaway options in temperature.cpp
2015-05-10 23:03:24 -07:00
Wurstnase
526ad82d20
activate advanced_ok and no_timeout
2015-05-11 08:01:51 +02:00
Scott Lahteine
2b92b01afc
Fix typo in SanityCheck.h
2015-05-10 22:58:37 -07:00
Scott Lahteine
2445ae3d3a
Combine thermal runaway and watch-period
...
- Make thermal protection for all hotends and/or bed into simple
switches
- Now enable `WATCH_TEMP_PERIOD` when `THERMAL_PROTECTION_HOTENDS` is
enabled
- Move detailed thermal parameters to `Configuration_adv.h`
- Add sanity checks to warn about old configurations
- Change `WATCH_TEMP_PERIOD` to seconds instead of milliseconds
2015-05-10 22:52:01 -07:00
Scott Lahteine
4097207c75
Merge pull request #2041 from thinkyhead/watch_temp
...
More thermal protection
2015-05-10 21:39:05 -07:00
Scott Lahteine
45d64040fe
Merge pull request #2048 from Wurstnase/hit_bits
...
replace some bools
2015-05-10 20:37:17 -07:00
Scott Lahteine
9b3d4380d3
Only watch the heater that was set
2015-05-10 20:26:45 -07:00
Scott Lahteine
52c0696e44
Merge pull request #2044 from thinkyhead/fix_servos_too
...
Make some z probe and servo code tweaks
2015-05-10 20:10:42 -07:00
Wurstnase
b55f32f8a1
replace some bools
...
this PR replaces some bools with one char. this will safe 3 bytes and should also be sometimes a little bit faster.
2015-05-10 21:37:39 +02:00
Laurent DELAGE
e70e6e2b48
Correction traductions
2015-05-10 15:38:50 +02:00
Scott Lahteine
f73f4ce555
Make some z probe and servo code tweaks
2015-05-09 19:11:19 -07:00
Scott Lahteine
28c87ec81b
Disable all heaters on temp error
2015-05-08 23:17:25 -07:00
Scott Lahteine
79106638a8
Fix documentation of heating sanity check
2015-05-08 22:50:08 -07:00
Scott Lahteine
6110494a56
Change default to 4°C in 16s
2015-05-08 22:41:12 -07:00
Scott Lahteine
54deb9eea3
Enable WATCH_TEMP_PERIOD by default
2015-05-08 22:36:02 -07:00
Scott Lahteine
deedb00c18
Document WATCH_TEMP_PERIOD
2015-05-08 22:25:51 -07:00
Scott Lahteine
be77cfd895
Merge pull request #2032 from Wurstnase/toshiba_for_all_stepper
...
We don't need the old standard one. The STEP_ADD and STEP_IF_COUNTER …
2015-05-08 20:32:30 -07:00
Scott Lahteine
cb4ea75fab
Support for MKS BASE 1.0 board
2015-05-08 19:07:37 -07:00
Scott Lahteine
0e70511381
Merge pull request #2036 from brupje/mainline
...
Fixes for reprapworld's keypad
2015-05-08 18:19:31 -07:00
Wurstnase
0cb87795a3
advanced 'ok'
...
ok N(linenumber) P(bufferremaining)
the host can use this to send the data much faster.
Some pseudo code:
If (bufferremaining > 0) send command
## as long there is free buffer send command
Also
if (linenumber > lastsend - bufferremaining) send command
## as long last linenumber received is bigger than lastsend (host) - last bufferremaining received
2015-05-08 22:28:51 +02:00
Wurstnase
182e0d99c9
Merge remote-tracking branch 'Marlin8bit/Development' into serial_wait
2015-05-08 21:27:18 +02:00
brupje
d1148a0198
Rename Configuration_megatronics.h to Configuration.h
2015-05-08 14:36:23 +02:00
Scott Lahteine
7f3252eea9
Merge pull request #1999 from paclema/Filrunout_configurable_script
...
Added configurable script for filrunout from configuration.h
2015-05-08 04:39:59 -07:00
Scott Lahteine
181ccc884c
Edit thermal runaway description
2015-05-07 20:46:03 -07:00
Wurstnase
073e4af7e2
We don't need the old standard one. The STEP_ADD and STEP_IF_COUNTER are also good for non-Toshiba stepper driver.
2015-05-07 18:55:47 +02:00
brupje
b7fcb11580
Added example configuration for Megatronics
2015-05-07 13:18:05 +02:00
brupje
8f8174dc93
Revert "Default configuration for megatronics."
...
This reverts commit 22e0d2afcb
2015-05-07 13:12:17 +02:00
Scott Lahteine
79633a74ab
Fix MBL compile error
2015-05-06 14:25:13 -07:00
brupje
ba9741139e
Clean up pins file for megatronics
2015-05-05 14:01:52 +02:00
brupje
22e0d2afcb
Default configuration for megatronics.
2015-05-05 14:01:20 +02:00
brupje
816aa19861
Up/down buttons were reversed, swapped the assignments
2015-05-05 13:04:46 +02:00
brupje
df4d50579a
This is conflicting with the settings in ultralcd.h. Not sure why it' s redefined here anyway.
2015-05-05 12:47:24 +02:00
brupje
8f8bf3a897
Make Marlin actually compile when #define REPRAPWORLD_KEYPAD is uncommented
2015-05-05 11:03:20 +02:00
Scott Lahteine
777f2d3820
Merge pull request #2018 from fmalpartida/bugFixing
...
Bug corrected: persistent HOMING message when HOME button pressed for homing.
2015-05-05 00:12:32 -07:00
Scott Lahteine
ecb46de349
Merge pull request #2013 from bq/Fix_lowercase
...
Fixed lowercase change missing on commit a22a228b
2015-05-04 23:50:56 -07:00
fmalpartida
150a35eff8
Bug corrected:
...
Persistent homing message.
Message was declared as an alert, therefore it was persistent.
Updated to message.
2015-05-04 19:48:49 +02:00
Gina Häußge
ab246ab032
Reverting changes to error messages on serial console
...
This reverts the changes done to the error message for line number mismatches done in commit d43cc2dd5f
2015-05-04 15:03:00 +02:00
Ivan Galvez Junquera
59529b755d
Fixed lowercase change missing on commit a22a228b.
...
Servo.cpp and Servo.h were changed to lowercase in Makefile but not their actual filenames.
2015-05-04 09:44:34 +02:00
Scott Lahteine
df4c104637
Merge pull request #2012 from BrianGilbert/Development
...
Add example configuration for Boots Industries V2.5 Delta Printer
2015-05-03 20:42:32 -07:00
Scott Lahteine
1f039cde61
Merge pull request #1992 from thinkyhead/too_many_probes
...
Stow Z probe on M402 without extra raise
2015-05-03 20:40:26 -07:00
Brian Gilbert
1285784a49
Add Boots Industries V2.5 example configuration
2015-05-04 09:10:42 +10:00
Scott Lahteine
35493e1af9
Tweak to planner.cpp position.debug
2015-05-03 16:03:05 -07:00
paclema
26015b02d8
Fixed typo and updated Configuration.h of configurator
2015-05-03 02:39:34 +02:00
paclema
aedd580911
Updated all configuration.h examples
2015-05-03 02:28:43 +02:00
Scott Lahteine
2c892fca6a
Cleanup of language.h
2015-05-01 21:38:32 -07:00
Scott Lahteine
2db384a21d
Fix compile error in configuration_store.cpp
2015-05-01 21:15:26 -07:00
Scott Lahteine
ca8cec8e8a
Merge pull request #1998 from paclema/Filament_runout_fix
...
Fixed sintaxis error of filament runout
2015-04-29 19:53:25 -07:00
Scott Lahteine
425cd46c12
Merge pull request #1993 from AnHardt/TRP-bed
...
Enable TRP for the bed
2015-04-29 19:44:50 -07:00
Scott Lahteine
d4c74b8f8c
Don't apply M428 if an error occurs
...
- Also move audio feedback into the command
- Added shorthand for `lcd_buzz` availability
2015-04-29 19:05:48 -07:00
Scott Lahteine
d065d37822
Add M428 to set home_offset logically
2015-04-29 18:26:16 -07:00
paclema
013a09dbe6
Added configurable script for filrunout form configuration.h
2015-04-29 21:38:40 +02:00
paclema
4dcc0fd55a
Fixed sintaxis error of filament runout
2015-04-29 21:32:27 +02:00
AnHardt
514d8ac460
Enable TRP for the bed
...
in all Configurations.
2015-04-29 08:47:01 +02:00
Scott Lahteine
ce3caf447b
Tweak how homeaxis deploys and stows
2015-04-28 19:17:48 -07:00
Scott Lahteine
a235dca79c
Stow z on M402 without extra raise
2015-04-28 19:10:07 -07:00
Scott Lahteine
2610b8d047
Enable thermal runaway protection by default
2015-04-28 17:40:29 -07:00
AnHardt
b4b19a6cbd
Merge https://github.com/MarlinFirmware/Marlin into Bulgarian
...
Conflicts:
Marlin/Configuration.h
Marlin/configurator/config/Configuration.h
Marlin/example_configurations/Felix/Configuration.h
Marlin/example_configurations/Felix/Configuration_DUAL.h
Marlin/example_configurations/Hephestos/Configuration.h
Marlin/example_configurations/K8200/Configuration.h
Marlin/example_configurations/SCARA/Configuration.h
Marlin/example_configurations/WITBOX/Configuration.h
Marlin/example_configurations/delta/generic/Configuration.h
Marlin/example_configurations/delta/kossel_mini/Configuration.h
Marlin/example_configurations/makibox/Configuration.h
Marlin/example_configurations/tvrrug/Round2/Configuration.h
Conflicts with my Chinese implementation resolved.
2015-04-28 09:24:32 +02:00
Scott Lahteine
7548a56f64
Merge pull request #1886 from ex-nerd/pins_BRAINWAVE_PRO
...
Add pin configuration for Brainwave Pro
2015-04-27 23:13:26 -07:00
Scott Lahteine
02acf0641a
Merge pull request #1983 from CONSULitAS/Development_Update_language_de.h
...
language_de.h: updated translation and minor typos
2015-04-27 22:45:24 -07:00
Scott Lahteine
a120bf3fe4
Latest upstream commits
2015-04-27 22:40:19 -07:00
Scott Lahteine
3688256f86
Merge pull request #1974 from thinkyhead/eeprom_in_gcode
...
Make EEPROM reproducible in GCode
2015-04-27 22:35:41 -07:00
Scott Lahteine
ae53b3cdc3
Fix the M303 S-1 report text
2015-04-27 22:25:00 -07:00
Scott Lahteine
c1fbef1722
Merge pull request #1988 from thinkyhead/bye_string_url
...
Remove obsolete STRING_URL
2015-04-27 22:12:05 -07:00
Scott Lahteine
31516e2a3b
Merge pull request #1985 from Arengorn/Development
...
Update of servo.h
2015-04-27 22:10:02 -07:00
Scott Lahteine
185f8a0a66
Merge pull request #1917 from CONSULitAS/Development_Update_K8200_Config
...
Example Configuration for K8200: comments/URL/readme
2015-04-27 21:59:56 -07:00
Scott Lahteine
0970102950
Remove obsolete STRING_URL
2015-04-27 21:59:14 -07:00
Scott Lahteine
0f687b5dda
Merge branch 'Development' into eeprom_in_gcode
...
Latest upstream commits
2015-04-27 21:47:47 -07:00
Scott Lahteine
28aef684b4
Merge pull request #1957 from Voxel8/sjk/home_y_before_x
...
Allow Y to home before X with option in Configuration_adv.h.
2015-04-27 21:41:14 -07:00
Scott Lahteine
c1dd9bda7f
Merge pull request #1987 from thinkyhead/fix_homing_zpos
...
Disable endstops between homing bumps
2015-04-27 21:16:47 -07:00
Scott Lahteine
71a0b1a5bb
Disable endstops between homing bumps
2015-04-27 21:14:30 -07:00
Scott Lahteine
8c28e36e75
Merge pull request #1986 from thinkyhead/fix_homing_zpos
...
Fix homing Z position
2015-04-27 20:58:14 -07:00
Scott Lahteine
c36226c4dc
Fix homing Z position
...
Add `sync_plan_position()` after `axis_is_at_home(axis)` to keep the
planner position in sync when homing.
2015-04-27 20:55:19 -07:00
Scott Lahteine
2bc1d70a31
Merge pull request #1977 from AnHardt/Cinese2
...
We mark this historic day, when Marlin went to China.
2015-04-27 20:37:00 -07:00
Scott Lahteine
ff178d8cf7
Change M421 to take coordinates
...
This makes `M421` more amenable for irregular matrices
2015-04-27 19:48:34 -07:00
Bernardo
e449659338
Update Servo.cpp
...
Updated "servo.h" to "Servo.h"
2015-04-27 23:30:11 -03:00
Bernardo
ff67ee73fc
Update Marlin_main.cpp
...
Corrected "servo.h" to "Servo.h" because of the updated filename.
2015-04-27 23:29:16 -03:00
Scott Lahteine
5b248757c7
Level Bed in Prepare submenu
...
- Add “Level Bed” menu item for auto bed leveling
- Hide the option if homing has not been done yet
- Arrange the Prepare submenu more logically (?)
- Add documentation comments, some white-space
- Apply some coding standards here and there
- Move old encoder multiplier debug option to `ultralcd.cpp`
2015-04-27 19:11:25 -07:00
CONSULitAS
c5dfb35597
language_de.h: updated translation and minor typos
...
language_de.h: updated translation and minor typos
2015-04-28 01:03:54 +02:00
CONSULitAS
6423fe7601
language.h: update documentation / URL für K8200
...
language.h: update documentation for LANGUAGE_INCLUDE
language.h: URL für K8200 github repository
2015-04-28 01:01:57 +02:00
CONSULitAS
6af40e9dc0
K8200 example Configuration.h: STRING_URL removed
...
K8200 example Configuration.h:
* STRING_URL removed: like proposed by thinkyhead in #1917
2015-04-27 23:59:10 +02:00
CONSULitAS
d1c1f766d5
Merge remote-tracking branch 'upstream/Development' into K8200_2015-04-23_TEST
...
Conflicts:
Marlin/example_configurations/K8200/Configuration.h
2015-04-27 23:54:47 +02:00
Steve Kelly
98ca46006c
Allow Y to home before X with option in Configuration_adv.h.
...
This addresses comments in #1956 and #1079 . In particular, this is useful
when both endstops are stationary on a CoreXY system, and the Y axis needs
to be homed before the X so the flags are aligned.
2015-04-27 16:17:30 -04:00
AnHardt
6cba6bcd82
Add 'cn' to the other 'Configuration.h's
2015-04-27 13:24:51 +02:00
AnHardt
1d9699be0f
Add some doku
2015-04-27 13:16:20 +02:00
AnHardt
76b12edecf
Give TALL_FONT_CORRECTION a default
2015-04-27 12:47:11 +02:00
AnHardt
6b1b71837c
Intit. commit for Chinese
...
Edited the European part of 'ISO10646_CN.fon' to match the existing fonts.
Added Chinese font to make_fonts.bat
Created 'dogm_font_data_ISO10646_CN.h'
Added Chinese to 'language.h'
Added 'language_cn.h' with some minor edits.
Added Chinese font in 'language_en.h' to not fall back to European font.
Added cn to 'Configuration.h'
Changed WIDTH to LCD_PIXEL_WIDTH and HEIGHT to LCD_PIXEL_HEIGHT to have more descriptive names.
In 'dogm_lcd_implementation.h'
Added Chinese Font
Made 1 pixel more room for the larger Chinese font on the status line.
Changed geometry of the 'select bar' by one pixel.
Changed the way the position for values and postcars are set.
2015-04-27 12:15:36 +02:00
Scott Lahteine
fb379384ee
Reduce MBL eeprom read code
2015-04-26 21:06:04 -07:00
Scott Lahteine
0fca084ea6
Make EEPROM reproducible in GCode
...
With these changes the output of `M503 S0` is all you need to restore
the EEPROM. Building on this it is straightforward to save and restore
the EEPROM state using the SD card or external GCode file.
- Added `M145` to set “heatup states” for the LCD menu
- Added `M420` to toggle Mesh Bed Leveling
- Added `M421` to set a single Mesh coordinate
- Extended `Config_PrintSettings` with added M codes
- Cleaned up some comments here and there
2015-04-26 20:56:33 -07:00
Scott Lahteine
d43cc2dd5f
M111 - Debug Level
...
- Add `M111` as a standard option to set the debug level
- Implement `DEBUG_ECHO` in `process_commands`
- Other debug levels (e.g., `DEBUG_DRYRUN`) need more work
2015-04-26 20:08:45 -07:00
Scott Lahteine
0ec444720f
Rename blinkm files
2015-04-25 21:06:19 -07:00
Scott Lahteine
a22a228bcc
Rename files to move them in the IDE
2015-04-25 21:04:54 -07:00
Scott Lahteine
a932e7490f
No noTone needed, but delay is
2015-04-25 03:25:30 -07:00
Scott Lahteine
9c5d14ea68
Fix BEEPER duration
2015-04-25 03:12:49 -07:00
Scott Lahteine
5c29fda167
Add a warning for DISABLE_[XYZ] options
2015-04-25 00:46:33 -07:00
Scott Lahteine
0438f0d835
Merge pull request #1924 from thinkyhead/raise_z_for_m401_m402
...
Raise Z for M401 and M402
2015-04-24 22:41:12 -07:00
Scott Lahteine
a640cad139
Merge pull request #1967 from thinkyhead/g4_dwell_message
...
Use millis_t for progress_bar_ms and expire_status_ms
2015-04-24 22:17:28 -07:00
Scott Lahteine
c92b59952a
Use millis_t for progress_bar_ms and expire_status_ms
2015-04-24 22:16:09 -07:00
Scott Lahteine
b275946a52
Merge pull request #1966 from thinkyhead/g4_dwell_message
...
G4 shows status message only if no message is set already
2015-04-24 22:02:37 -07:00
Scott Lahteine
97dfa0365d
Rename expireStatusMillis to expire_status_ms
2015-04-24 21:51:10 -07:00
Scott Lahteine
7295640f44
Remove extraneous ;
2015-04-24 21:37:27 -07:00
Scott Lahteine
0d8c00d3f6
Define lcd_hasstatus for no lcd also
2015-04-24 21:36:04 -07:00
Scott Lahteine
182f2cda35
Minor cleanup of M48
2015-04-24 21:26:36 -07:00
Scott Lahteine
3a6fd912cd
Latest upstream commits, merged
2015-04-24 21:14:13 -07:00
Scott Lahteine
3c9e94e035
Merge pull request #1964 from AnHardt/Max6675again
...
Add variant for MAX6675 in M104
2015-04-24 20:44:45 -07:00
Scott Lahteine
56ff46eb8b
Improve code_has_value test
2015-04-24 20:43:16 -07:00
Scott Lahteine
ce142afdda
G4 shows status message only if no message is set already
...
- Address issue raised in #1961
2015-04-24 20:13:01 -07:00
Scott Lahteine
35e79d56a5
Remove set-coordinate extension of G28
2015-04-24 19:23:12 -07:00
Scott Lahteine
3a74bb5039
Merge pull request #1945 from Wurstnase/max_endstopp
...
Max endstopp
2015-04-24 19:17:38 -07:00
AnHardt
0fed46360c
Add variant for MAX6675 in M104
...
Else will throw error:
@:0 B@:0
Error:No thermistors - no temperature
[ERROR] Error:No thermistors - no temperature
when no bed is defined
2015-04-24 16:43:19 +02:00
Wurstnase
79a44a9de3
stepper.cpp macros rework
...
delete some tabs
2015-04-24 08:03:17 +02:00
Scott Lahteine
588ed70d4a
Latest upstream commits, merged
2015-04-23 21:18:48 -07:00
Scott Lahteine
0165560333
Apply zprobe_zoffset in axis_is_at_home
...
Ensure the probe offset will always be included when homing Z.
2015-04-23 21:12:38 -07:00
Scott Lahteine
075386e7fe
Merge pull request #1959 from thinkyhead/lcd_move_rate
...
Include axis parameter to ultralcd's line_to_current
2015-04-23 21:06:57 -07:00
Scott Lahteine
2558c10c6c
Use the slower feedrate for XY axes
2015-04-23 20:06:17 -07:00
Scott Lahteine
31932912dd
Use AxisEnum instead of int for _lcd_move
2015-04-23 19:32:37 -07:00
Scott Lahteine
c2e11daf66
Merge pull request #1958 from thinkyhead/redo_1937
...
Fix homing of YZ with DUAL_X_CARRIAGE
2015-04-23 19:12:51 -07:00
Scott Lahteine
c3560e0288
Include axis parameter to ultralcd's line_to_current
2015-04-23 19:10:09 -07:00
Scott Lahteine
a0a5ff61c4
Merge pull request #1951 from AnHardt/Azteeg_x3
...
Fix for #1946
2015-04-23 18:40:00 -07:00
Scott Lahteine
0094481e55
Merge pull request #1955 from AnHardt/langlang
...
Add DISPLAY_CHARSET_HD44780_CYRILLIC as alternative in SanityCheck.h
2015-04-23 18:36:06 -07:00
Scott Lahteine
64268f3312
Fixup axis_is_at_home a little
2015-04-23 18:16:44 -07:00
Scott Lahteine
996d0a9185
Squish the code down a little
2015-04-23 18:06:36 -07:00
Scott Lahteine
8534bc376c
Fix homing of YZ with DUAL_X_CARRIAGE
2015-04-23 17:56:37 -07:00
Scott Lahteine
3b97a7d446
Merge pull request #1944 from AnHardt/beep2
...
More Beeper clean up
2015-04-23 17:50:02 -07:00
Wurstnase
be9e4ceddc
fix typo
...
c'n'p ftw :/
2015-04-23 10:35:14 +02:00
unknown
c26d816839
filter any 0
2015-04-22 12:09:57 +02:00
AnHardt
f2c94b3298
tone will end automaticly
2015-04-22 01:49:55 +02:00
AnHardt
c5e0e29d23
Add DISPLAY_CHARSET_HD44780_CYRILLIC as alternative in SanityCheck.h
...
and add some documentation - how to integrate a new font.
2015-04-21 21:42:00 +02:00
AnHardt
b59e92ab99
Fix for #1946
...
Syntax error.
2015-04-21 13:50:28 +02:00
Wurstnase
61ae43f35e
v <-> code_value
2015-04-20 23:31:10 +02:00
Wurstnase
da0d91a79b
max endstopp
...
no user will home to 0 with a max endstopp
2015-04-20 23:28:46 +02:00
AnHardt
3a27a78f9e
Commented REPRAP_DISCOUNT_SMART_CONTROLLER again
...
and removed some tabs.
2015-04-20 15:01:43 +02:00
AnHardt
064f2b37d0
More Beeper clean up.
...
Centralised beep code to lcd_buzz().
From gcode_M300() and lcd_quick_feedback().
Enforced max. duration for M300 to 5 seconds.
Corrected description in 'Configuration.h'
LCD_FEEDBACK_FREQUENCY_HZ 0 gives now a silent delay of
LCD_FEEDBACK_FREQUENCY_DURATION_MS.
2015-04-20 11:11:13 +02:00
Wurstnase
92575cecca
new timout/add adv_ok
2015-04-20 00:22:40 +02:00
AnHardt
671aaf2dc9
Minor fix for M300
...
Corrected wrong order of parameters.
2015-04-19 13:25:20 +02:00
Scott Lahteine
d931220a65
Tweak comments
2015-04-18 23:12:29 -07:00
Scott Lahteine
47847765e2
Add M410 QuickStop command
2015-04-18 23:07:48 -07:00
Scott Lahteine
a4ca87ba99
Merge pull request #1933 from bq/Fix_stray_in_configuration
...
Fixed compilation error "error: stray ‘\357’ in program"
2015-04-18 03:56:31 -07:00
Scott Lahteine
5e3bb4bdf3
Merge pull request #1931 from paclema/M303_echo
...
Added new PID autotune info, to make easy copy & paste results to marlin
2015-04-18 03:49:31 -07:00
Ivan Galvez Junquera
b99e63a7bf
Fixed compilation error "error: stray ‘\357’ in program" in several configuration files.
...
Introduced in commit 697ee2dc
2015-04-17 16:10:58 +02:00
paclema
581685a231
Added new PID autotune info, to make easy copy & paste results to marlin
2015-04-17 11:15:09 +02:00
Chris Palmer
483384aaa4
Fixed faulty comment merge
2015-04-17 09:31:53 +01:00
Chris Palmer
cc6b7cf3ce
Fixed some comment spellings.
2015-04-17 09:28:08 +01:00
Chris Palmer
e4595fa24a
Fixed jump in speed when using high accelerations on axes with lots of steps.
...
I.e., when acceleration * steps per mm > 2,000,000.
This was done by changing MultiU24X24toH16 to take a 32b bit operand.
Removed the claim that stepper.cpp uses the Leib algorithm.
2015-04-16 23:04:38 +01:00
Wurstnase
b09a957fce
make 'wait' optional and mark as workaround
2015-04-16 21:42:54 +02:00
Scott Lahteine
63b98b8280
Raise Z for M401 and M402
2015-04-16 07:24:33 -07:00
wurstnase
d69da22f7c
last_command_time inside get_command()
2015-04-16 16:20:23 +02:00
Scott Lahteine
53be0f3399
Babystep delay 2us
2015-04-16 04:16:36 -07:00
wurstnase
574e2d856e
remove config
2015-04-16 13:07:20 +02:00
paclema
cde5eee2a5
Removed unnecessary comments
2015-04-15 19:01:09 +02:00
paclema
e1b69db6d1
Fixed M48 mismatch between n and P parameter on documentation
2015-04-15 18:17:58 +02:00
CONSULitAS
1de9b568db
Example Configuration for K8200: comments/URL/readme
...
Example Configuration for K8200 : comments/URL/readme
example_configurations\K8200\Configuration.h:
* add machine specific header
* change STRING_URL to K8200 fork (@thinkyhead: What do you think?)
example_configurations\K8200\readme.md:
* updated documentation
* added URLs and links
2015-04-15 10:02:13 +02:00
CONSULitAS
0af5e3a04f
Example Configuration for K8200: comments/URL/readme
...
Example Configuration for K8200 : comments/URL/readme
example_configurations\K8200\Configuration.h:
* add machine specific header
* change STRING_URL to K8200 fork (@thinkyhead: What do you think?)
example_configurations\K8200\readme.md:
* updated documentation
* added URLs and links
2015-04-15 10:00:41 +02:00
Scott Lahteine
637babb99b
Merge pull request #1915 from elgambitero/Development
...
Some minor translations to spanish
2015-04-14 19:59:39 -07:00
elgambitero
cb9ac490d4
Some minor translations to spanish
2015-04-14 23:14:52 +02:00
CONSULitAS
3851ac6226
Example Configuration for K8200 back in sync
...
example_configurations\K8200\Configuration.h:
* merge upstream changes from default Configuration.h manually
* add some machine specific comments
2015-04-14 17:12:42 +02:00
CONSULitAS
b447a4ffab
Merge remote-tracking branch 'upstream/Development' into Development
2015-04-14 15:35:08 +02:00
Scott Lahteine
7336e6df07
Always define old_z, not always z2
2015-04-14 04:55:20 -07:00
Scott Lahteine
5dd87d2e74
Enable all old_z_*_endstop vars for Z_DUAL_ENDSTOPS
...
- Potentially addressing #1911
2015-04-14 04:05:51 -07:00
Scott Lahteine
3f02da646c
Make sure axis_active is cleared for #1908
2015-04-14 03:41:37 -07:00
Scott Lahteine
e0e68c5cbc
Rename servos[] array in Marlin to servo[]
2015-04-14 03:13:25 -07:00
Chris Petersen
ffaf1b4f22
Add pin configuration for Brainwave Pro
...
Copied from jcrocholl's contributions to the OpenBeamUSA Marlin fork
2015-04-13 23:46:57 -07:00
Scott Lahteine
642f6a92bc
fix type of code_has_value
2015-04-13 18:02:17 -07:00
Scott Lahteine
17ad80c1e1
Spacing in XYZ_CONSTS
2015-04-13 17:58:47 -07:00
Scott Lahteine
09d60e0128
Naming and code comments
2015-04-13 17:17:36 -07:00
Mehmet Sutas
5a9e45cc4a
Fix Syntax Error Filament Runout Statement
2015-04-13 22:37:18 +03:00
Scott Lahteine
257a907456
Fix typo in next_bed_check_ms
2015-04-12 23:17:28 -07:00
Scott Lahteine
e4b1e8651b
next_ vars faster than previous_
...
- Change some `previous_` time vars to `next_` so an add only happens
at intervals
- Fix `HEATER_0_USES_MAX6675` polling too frequently, or not at all
2015-04-12 23:06:50 -07:00
Scott Lahteine
ccddc280be
Apply three more commits
2015-04-12 22:47:44 -07:00
Scott Lahteine
74e4b42f7e
Default MACHINE_NAME to "3D Printer"
2015-04-12 17:17:41 -07:00
Scott Lahteine
8857b9e921
Use the extruder argument in plan_buffer_line
2015-04-12 16:57:00 -07:00
Scott Lahteine
ac2b23f574
Homing fixes
...
- Prevent `Z_SAFE_HOMING` from homing Z twice in some cases
- Allow `G28` with XYZ values of 0 to explicitly set the position
- Don’t add `home_offset` when setting XYZ explicitly in `G28`
- Add `code_has_value` function to check for the presence of a numeric
value (could just test for space or nul to allow other types of values)
2015-04-11 20:06:48 -07:00
Scott Lahteine
055b11814a
Additional cleanup of ultralcd.cpp
2015-04-11 04:56:08 -07:00
Scott Lahteine
388dd0cfa5
Fix doubled lcd_quick_feedback
...
- MENU_ITEM causes lcd_quick_feedback to be called, so only those calls
to `lcd_goto_menu` outside of the `MENU_ITEM` macro need to set the
`feedback` flag when calling `lcd_goto_menu`.
2015-04-11 04:45:04 -07:00
Scott Lahteine
c6bb98abad
machine name for hephestos too
2015-04-11 01:36:24 -07:00
Scott Lahteine
ccbe2c4ea3
Apply CUSTOM_MACHINE_NAME to configurations
...
- Replace “Mendel” with “RepRap”
2015-04-10 21:29:42 -07:00
Scott Lahteine
5fe382949b
Some G-Codes comment cleanup
2015-04-10 16:16:13 -07:00
Scott Lahteine
8b16ebe705
Break out prevent_dangerous_extrude feature
...
- It’s inline here, but could be a macro and duplicated for
`planner.cpp`
2015-04-09 22:40:37 -07:00
Scott Lahteine
740152ee70
Merge branch 'Development' into cold_extrude
...
Latest upstream commits
2015-04-09 20:23:47 -07:00
Scott Lahteine
5914d9d7de
Shuffling declarations..
2015-04-09 20:21:30 -07:00
Scott Lahteine
b328c6e6b6
Shuffling declarations.
2015-04-09 20:05:10 -07:00
Scott Lahteine
fb4cefc91d
Define lcd_move_[xyz] ahead of lcd_move_menu_axis
2015-04-09 19:33:16 -07:00
Richard Miles
4c3736ed43
Feature: Add RAMPS CNC Controller Board
...
Created a new board to make using RAMPS as a CNC machine controller
easier. It maps pin 8 to the spindle and pin 9 to the controller fan.
2015-04-09 16:32:56 +01:00
Scott Lahteine
9189cc66ab
Fix moves for DELTA for MANUAL_BED_LEVELING
...
- Use `line_to_current` in place of `plan_buffer_line`
2015-04-09 04:32:14 -07:00
AnHardt
56fc3a4835
bgr -> bg
...
+ update in documentation
2015-04-09 13:09:18 +02:00
Scott Lahteine
7a1aef1450
Merge pull request #1877 from AnHardt/display-only
...
Made encoderPosition and quick_feedback dependant on NEWPANEL
2015-04-09 03:54:05 -07:00
Scott Lahteine
6096164d79
Merge pull request #1878 from thinkyhead/cold_extrude
...
Cold extrude
2015-04-09 03:41:54 -07:00
Scott Lahteine
a488445cbe
Fix spelling of "too"
2015-04-09 03:41:31 -07:00
Scott Lahteine
b1950a7f25
Merge pull request #1875 from Natealus/Development
...
Z Probe inverting not present in example configs, causes error
2015-04-09 03:37:24 -07:00
AnHardt
df50523605
Made encoderPosition and quick_feedback dependant on NEWPANEL
...
where the hardware is available.
Fix for #1873
2015-04-09 12:26:45 +02:00
Scott Lahteine
2ca099d1e7
Merge pull request #1876 from thinkyhead/cold_extrude
...
Catch dangerous extrude before trying several
2015-04-09 03:21:19 -07:00
Scott Lahteine
837ceb9abb
Merge pull request #1867 from epatel/Development
...
Added sanity check for MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS
2015-04-09 02:29:47 -07:00
Scott Lahteine
a95544f92a
Spell adjustment
2015-04-09 02:04:06 -07:00
Scott Lahteine
a00ebf03d4
Merge pull request #1868 from AnHardt/LCD_STR
...
Moved the definitions of the LCD_STR_* to Conditionals.h
2015-04-09 01:56:23 -07:00
Scott Lahteine
1269c445ab
Catch dangerous extrude before trying several
2015-04-09 01:40:48 -07:00
Natealus
585eee6549
Z Probe inverting not present in example configs, causes error
...
The line const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to
invert the logic of the endstop is in the main configuration.h but
wasn't present in the example configuration.h's. Causes a compiling
error with Z Probe enabled. Just added it to all the configs. :)
2015-04-08 18:57:30 -06:00
AnHardt
c5961892e3
Bulgarian for all the Configuration.h's
2015-04-09 01:52:13 +02:00
AnHardt
6248c93f37
Introduction of Bulgarian - language_bgr.h
...
Thank you @Nprod!
2015-04-09 01:26:48 +02:00
AnHardt
540dbb35e2
And an other MSG_BED in Marlin_main.cpp
2015-04-09 01:16:06 +02:00
AnHardt
14d4419e16
Replaced SERIAL_PROTOCOLPGM(MSG_BED) with SERIAL_PROTOCOLPGM("Bed")
...
Resolved some warnings in Marlin_main.cpp regarding compares of signed and unsigned integers by replacing 'int' or 'uint16_t' with 'uint8_t'.
2015-04-08 23:59:01 +02:00
AnHardt
ea897654a4
Moved the definitions of the LCD_STR_* to Conditionals.h
...
to avoid errors in Marlin_main.cpp. #1860
In the include tree of Marlin_main.cpp the decision between the display types is not made.
To include the right LCD_STR_* ether 'dogm_lcd_implementation.h' or 'ultralcd_implementation_hitachi_HD44780.h' with all their code.
A 'dogm_lcd_implementation.h.h' would be a curiosity.
So i moved both of the definition blocks to conditionals.h
On the long term it could make sense to use the same numbering for the u8glib and the hitachi symbols.
2015-04-08 21:53:58 +02:00
Edward Patel
7dc64efe67
Added sanity check for MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS
2015-04-08 20:52:48 +02:00
AnHardt
6a514f3dc9
Aplied HAS_LCD_CONTRAST also to Marlin_main.cpp
...
and cleaned typo.
2015-04-08 13:26:29 +02:00
AnHardt
a76fb42ca6
Merge https://github.com/MarlinFirmware/Marlin into contrast
2015-04-08 13:05:21 +02:00
AnHardt
bcc04192fc
Remove Contrast Menu for U8GLIB_ST7920
...
The other two devices we use in u8glib have more than only dummy code.
Checked this in the library code.
2015-04-08 12:56:38 +02:00
Scott Lahteine
4788b59300
Thermistor values for configurator
2015-04-08 03:12:21 -07:00
Scott Lahteine
bb917ecda8
Merge pull request #1853 from thinkyhead/dev_version
...
Set version to "1.0.3 dev"
2015-04-08 01:57:51 -07:00
Scott Lahteine
caa7734402
Merge pull request #1864 from thinkyhead/is_running
...
IsStopped / IsRunning inline
2015-04-08 01:10:36 -07:00
Scott Lahteine
3162971cd6
current_position not static
2015-04-08 01:05:39 -07:00
Scott Lahteine
27cb90da8b
IsStopped / IsRunning inline
2015-04-08 00:56:19 -07:00
Max
07fc2b5b70
Update language_ru.h
2015-04-08 13:18:45 +06:00
Scott Lahteine
756bb5e268
Cleanup formatting in hitachi & dogm lcd
2015-04-07 22:04:10 -07:00
Scott Lahteine
7431ef7e2d
Merge branch 'Development' into dev_version
...
Latest upstream commits
2015-04-07 21:14:00 -07:00
Scott Lahteine
43773ff735
Formatting and lcd contrast masking
2015-04-07 21:11:03 -07:00
Scott Lahteine
eb6e3886f4
Set version to "1.0.3 dev"
2015-04-07 20:38:43 -07:00
Scott Lahteine
cf9b58452c
Minimum delay in menu click feedback
...
Squished #1849
2015-04-07 20:20:30 -07:00
Scott Lahteine
1d291be2ba
Fix de after PREVENT_DANGEROUS_EXTRUDE
...
- Set `de` to 0 when `position[E] = target[E]`
- Address regression mention in #1846
2015-04-07 20:01:08 -07:00
Scott Lahteine
e03da4805b
Merge pull request #1774 from epatel/Development
...
Mesh bed leveling: Added G29 S3 + finer display steps during manual input + bug fix
2015-04-07 19:24:46 -07:00
Scott Lahteine
f7c4e7e19f
Fix G29 not deploying in some instances
2015-04-07 15:38:29 -07:00
Edward Patel
a9ed39b12d
Moved checks into SanityCheck.h + removed previous added checks.
2015-04-07 22:58:08 +02:00
Edward Patel
002340f32c
Merge branch 'Development-Marlin' into Development
2015-04-07 22:49:12 +02:00
Scott Lahteine
c379f17117
Encapsulate setting of homing_bump_feedrate
2015-04-06 23:21:33 -07:00
Scott Lahteine
7d2c2f1790
Updates for the configurator
...
- Sections in all `Configuration_adv.h`
- Recognize JAPANESE/WESTERN/CYRILLIC options
- Better capturing of comments for tooltips
2015-04-06 23:16:01 -07:00
Scott Lahteine
967db181d0
Latest upstream commits
2015-04-06 21:46:18 -07:00
Scott Lahteine
e502144eda
Fixup formatting of last commit
2015-04-06 21:28:14 -07:00
Scott Lahteine
d05efa008d
Merge pull request #1825 from shaggythesheep/bugfix_no_heaters
...
Bugfix: Temperature checks when no heaters in use
2015-04-06 21:25:22 -07:00
Scott Lahteine
d20f42c883
Don't stow the probe until the last grid point!
...
- Address Issue #1682 at hash #issuecomment-89756858
2015-04-06 20:58:09 -07:00
Scott Lahteine
5c2bb05af3
Merge pull request #1839 from AnHardt/fix-statusmessage
...
Fix lcd_status_message
2015-04-06 19:08:25 -07:00
Scott Lahteine
d70a4a3847
Merge pull request #1823 from AnHardt/splashscreen
...
Disable splash-screen when done once
2015-04-06 18:48:48 -07:00
Scott Lahteine
56aea5f8e5
Merge pull request #1829 from Natealus/Development
...
Azteeg X3 Pro Pin fix ups
2015-04-06 18:19:33 -07:00
Scott Lahteine
6a860b99dc
Merge pull request #1828 from Wackerbarth/Configurator
...
Update Configurator Files
2015-04-06 18:09:26 -07:00
AnHardt
ac843fbf3b
Fix lcd_status_message
...
Because we now can use utf8 with up to 3 bytes per symbol,
lcd_status_message[] must be 3*LCD_WIDTH wide.
Filling up the message, or cutting to length, are fixed to.
Fix for #1832 about at the end.
2015-04-07 02:33:34 +02:00
Scott Lahteine
6d084c017f
Fix typo in FWRETRACT handler
...
Should be `retracting` and not `retract`
2015-04-06 17:04:22 -07:00
Edward Patel
d27c82a450
Added check for Delta printers in Mesh, #error not yet supported.
2015-04-06 23:03:06 +02:00
Edward Patel
9a093b2e8f
Added #error + mention not to enable ABL and Mesh at the same time
2015-04-06 19:38:59 +02:00
AnHardt
6ae714894e
Now the simplycistic solution.
...
Just and only display splashscreen only once.
2015-04-06 12:43:38 +02:00
AnHardt
d521693641
Revert "Draw content in display loop only when needed"
...
This reverts commit bf04a92cc0
2015-04-06 12:31:31 +02:00
Natealus
b6f2bff461
Azteeg X3 Pro Pin fix ups
2015-04-05 23:34:56 -06:00
Scott Lahteine
d867c18535
Fix compile error with Z_DUAL_ENDSTOPS
2015-04-05 20:48:08 -07:00
Richard Wackerbarth
46474cf2f2
Incorporate @section headers from configurator
2015-04-05 22:39:40 -05:00
Richard Wackerbarth
cf66cb8808
Bring configurator up-to-date
2015-04-05 22:38:15 -05:00
Richard Miles
1a5293c2ce
Prevents MINTEMP / MAXTEMP when no heaters present
...
This commit checks whether or not HEATER_0 is in use, and if not, skips
the MIN / MAX temperature checks.
2015-04-05 22:27:14 +01:00
Edward Patel
5360158545
Merge branch 'Development-Marlin' into Development
2015-04-05 20:28:44 +02:00
AnHardt
bf04a92cc0
Draw content in display loop only when needed
...
Example for splash screen.
2015-04-05 12:53:20 +02:00
AnHardt
9865318f1c
Disable splash-screen when done once
...
Splash screen was shown with every display init.
That means every time the menus where entered.
Note the 2 in the initialisation.
The buffer is already written in two steps a 512 byte.
Without the 2 only the upper half is shown.
2015-04-05 12:24:01 +02:00
Scott Lahteine
53eb662908
Have the configurator read from MarlinFirmware repo
2015-04-04 20:19:17 -07:00
Edward Patel
d24ea7c03f
Added Comment in hope of github seeing these updates
2015-04-05 05:14:06 +02:00
Edward Patel
61de6ecd54
Added change to example Configuration.h's
2015-04-05 04:26:35 +02:00
Edward Patel
2f0081bbb5
Compile error fix! Fix for merge artifacts.
2015-04-05 04:16:16 +02:00
Edward Patel
0e6514e7bd
Bug fix! Missed putting z value back in right slot after zigzag mod.
2015-04-05 04:13:34 +02:00
Edward Patel
ea10601406
Merge branch 'Development-Marlin' into Development
...
Conflicts:
Marlin/Configuration.h
Marlin/Marlin_main.cpp
2015-04-05 04:06:02 +02:00
Scott Lahteine
cb02bc6db4
Merge pull request #1817 from AnHardt/dogm_looptest
...
Execute DOGM display-loop less often
2015-04-04 17:29:56 -07:00
quillford
b02a55e60f
Fixed scara directions
...
Config said for a delta instead of for a scara
2015-04-04 15:26:35 -07:00
Scott Lahteine
6c5f07c5cb
Merge pull request #1813 from thinkyhead/fixup_probing
...
Fix bad thermal runaway trigger
2015-04-04 14:41:43 -07:00
AnHardt
340d165a9c
Reduce display updates for dogm displays
...
In 'if (encoderPastThreshold || LCD_CLICKED)' lcdDrawUpdate was not set.
'lcd_status_update_delay'-loop was not effective in function
lcd_status_screen().
The loop prevented the update of the status screen but not the displays
update.
Shifted the loop into lcd_update().
2015-04-04 22:02:24 +02:00
AnHardt
418d22d7b3
Revert "Testloop cleanup"
...
This reverts commit 6361404b91
2015-04-04 18:33:36 +02:00
AnHardt
6361404b91
Testloop cleanup
...
Shifted condition should still be in.
2015-04-04 17:56:13 +02:00
AnHardt
6d4b3f0d6a
Move the condition before the loop
...
Result see: https://youtu.be/AEnBzdu9_tk
Dot is moving not so fast -> less executed loops.
2015-04-04 17:49:39 +02:00
AnHardt
4cb7dfc546
Move the 'alive dot' in every displayloop
...
Result see: https://www.youtube.com/watch?v=tdu7J0i-c4g
Loop is executed several times per display update.
2015-04-04 17:34:28 +02:00
Scott Lahteine
b0f198c153
heater_index above its use
2015-04-04 06:18:08 -07:00
Scott Lahteine
60f8e0386f
More thermal runaway states
2015-04-04 05:45:36 -07:00
Scott Lahteine
f9dbd73652
Fix tr_target_temperature type - float!
2015-04-04 05:25:53 -07:00
Scott Lahteine
c83faa9c5e
Merge pull request #1811 from thinkyhead/fixup_probing
...
Compare indices instead of floats for probe actions
2015-04-04 05:14:59 -07:00
Scott Lahteine
61f8394361
Compare indices instead of floats for probe actions
2015-04-04 05:01:16 -07:00
Scott Lahteine
a98183b463
Merge pull request #1809 from Wackerbarth/LanguageCleanup
...
Deferring default definition made #undef unnecessary
2015-04-04 04:37:20 -07:00
Scott Lahteine
41ded7e996
Merge pull request #1805 from thinkyhead/fixup_probing
...
Optimize coordinate copying, fix EXTRUDER_RUNOUT_PREVENT
2015-04-04 03:49:54 -07:00
Richard Wackerbarth
4119738e69
Deferring default definition made #undef unnecessary
2015-04-04 05:48:07 -05:00
Scott Lahteine
6f06d33be5
Fix missing refresh_cmd_timeout function
2015-04-04 03:47:25 -07:00
Scott Lahteine
2d099a2c70
Fix missing backslash in macro
2015-04-04 03:35:16 -07:00
Scott Lahteine
0f9b29e6c5
Merge pull request #1803 from Natealus/Development
...
Z_PROBE_ENDSTOP Pin for Azteeg X3 Pro
2015-04-03 23:45:05 -07:00
Scott Lahteine
0935084141
Fix manage_inactivity
...
- Document `manage_inactivity` function
- Allow `EXTRUDER_RUNOUT_PREVENT` to work with all extruders
- Use faster `memcpy` for copying coordinates
2015-04-03 23:42:50 -07:00
Scott Lahteine
c065da52ec
Spacing and spelling
2015-04-03 22:54:48 -07:00
Scott Lahteine
a3e129e091
Merge pull request #1801 from thinkyhead/fixup_probing
...
Minor optimizations
2015-04-03 22:30:01 -07:00
Natealus
ab11f90da0
Z_PROBE_ENDSTOP Pin for Azteeg X3 Pro
...
Just a simple #ifdef Z_PROBE_ENDSTOP to define the pin for it. Also has
a couple commented lines for switching Z_MIN_PIN if needed.
2015-04-03 23:14:03 -06:00
Scott Lahteine
8680b515b0
Fix missing tmp_extruder -> target_extruder
2015-04-03 22:12:49 -07:00
Natealus
a6ba40ae48
Compiling error temperature.cpp with multiple extruders defined
...
It wouldn't compile because of this line in temperature.cpp it turns out
it was just a stray ( that didn't line up with the previous lines so I
just made it in line with the rest and it compiled fine.
2015-04-03 23:09:31 -06:00
Scott Lahteine
fc3c76fc16
Fix #1800
2015-04-03 22:04:42 -07:00
Scott Lahteine
c185912c19
Latest upstream commits, mostly
2015-04-03 21:58:48 -07:00
Scott Lahteine
1e5c18bb14
Add code_value_short and SERIAL_CHAR
2015-04-03 21:43:30 -07:00
Scott Lahteine
e0d4368cb5
Minor code cleanup, move NUM_AXIS out of config
2015-04-03 20:45:24 -07:00
Scott Lahteine
4c7af484f8
Merge pull request #1787 from thinkyhead/fixup_tr
...
Fix: thermal_runaway_protection triggered by target temperature increase
2015-04-03 20:06:56 -07:00
Scott Lahteine
c747becec1
Merge pull request #1796 from thinkyhead/pidbed_temp_eeprom
...
Add PIDTEMPBED to EEPROM
2015-04-03 20:03:38 -07:00
Scott Lahteine
84e4edaea7
Add M48 comment for #1794
2015-04-03 19:52:00 -07:00
Scott Lahteine
9ba55baa5b
Track target temperature separately for each heater
2015-04-03 19:42:40 -07:00
Scott Lahteine
528e32a1d4
Fix timeout in thermal_runaway when temperature is set higher
2015-04-03 19:34:55 -07:00
Scott Lahteine
b98ebd517e
disable / enable_all_steppers functions
2015-04-03 19:25:22 -07:00
Scott Lahteine
713953d8c1
Upstream commits, allow no extruder in M105
2015-04-03 19:16:38 -07:00
Scott Lahteine
8f893eb8df
Merge pull request #1798 from thinkyhead/fixup_probing
...
Fix probe height at G28 start
2015-04-03 19:03:00 -07:00
Scott Lahteine
dde7e11f8e
Merge branch 'Development' into fixup_tr
...
Latest upstream commits
2015-04-03 18:56:52 -07:00
Scott Lahteine
abd7fc36b6
Fix probe height at G28 start
2015-04-03 18:54:55 -07:00
Scott Lahteine
610c8c5471
Merge pull request #1795 from thinkyhead/fixup_probing
...
Finish pin tests
2015-04-03 18:44:44 -07:00
Scott Lahteine
e4934164e4
Merge pull request #1790 from Wurstnase/fix_home_z
...
fix feedrate for homing z
2015-04-03 18:35:09 -07:00
Scott Lahteine
a469d796e1
Add cleanups needed for #1772
2015-04-03 18:14:57 -07:00
Scott Lahteine
c0ca26cd50
Merge branch 'Development' into fixup_probing
...
Latest upstream commits
2015-04-03 18:05:17 -07:00
Scott Lahteine
5c1f08a35f
Merge pull request #1772 from croadfeldt/Merge_cleanup
...
Z_PROBE_ENDSTOP
2015-04-03 18:04:31 -07:00
Scott Lahteine
db7b0ea0cf
Merge pull request #1569 from Wackerbarth/Development
...
Incorporating Build Numbers
2015-04-03 16:56:31 -07:00
Scott Lahteine
92119d0f7d
Static delta[] for SCARA
2015-04-03 16:46:56 -07:00
Scott Lahteine
007a4bd421
Adjust spacing in view function
2015-04-03 16:41:58 -07:00
Scott Lahteine
424d5495e4
Add PIDTEMPBED to EEPROM
2015-04-03 16:38:05 -07:00
Scott Lahteine
6b919e14c1
Group all universal variables
2015-04-03 15:45:41 -07:00
Scott Lahteine
21cd2e4fae
Merge branch 'Development' into fixup_probing
...
Latest upstream commits
2015-04-03 15:32:15 -07:00
Scott Lahteine
0e8182bbf2
Additional pin tests, cleanup
2015-04-03 15:31:35 -07:00
Wurstnase
45565b680d
second wrong feedrate
2015-04-03 18:01:28 +02:00
Wurstnase
581b2aae04
fix feedrate for homing z
...
max_feedrate is in mm/s. line_to_destination needs a feedrate in mm/min because there is feedrate/60.
2015-04-03 16:11:32 +02:00
Edward Patel
48b1c3822f
Merge branch 'Development-Marlin' into Development
2015-04-03 00:46:30 +02:00
Richard Wackerbarth
ccdaea51ba
Add KosselPro
2015-04-02 09:20:24 -05:00
Richard Wackerbarth
f4599143eb
Allow M115 to better reflect the build
2015-04-02 09:20:24 -05:00
Richard Wackerbarth
34c7d45879
Hook for Auto-generated Build Version
...
The automatic versioning system extracts a
build version number from the SCM system
That versioning information is written to the file
_Version.h, a file that is NOT preserved in the SCM.
If such a file will be present,
we include it here to utilize the parameters
that are defined therein.
2015-04-02 09:20:24 -05:00
Scott Lahteine
c756b4cf07
Comment tweak
2015-04-02 06:11:03 -07:00
AnHardt
23cd54755f
Fix typo in Marlin_main.cpp
...
related to current_position[Z_AXIS] and retract_zlift.
'+ =' -> '+='
Fix for #1786
2015-04-02 14:50:31 +02:00
Scott Lahteine
e96df67630
Clarify thermal_runaway_protection
...
- Add comments documenting `thermal_runaway_protection`
- Add an enum for the thermal runaway states
- Add macros for temperature helper functions
- Fix a glitch with the z probe sled in homeaxis
2015-04-02 05:10:14 -07:00
Chris Roadfeldt
0afe6696f0
Merge remote-tracking branch 'MarlinFirmware/Development' into Merge_cleanup
2015-04-01 19:31:20 -05:00
Chris Roadfeldt
59994bd519
Not doing network admin work, pin not ping... :)
2015-04-01 19:24:42 -05:00
Chris Roadfeldt
916f59e35f
Spaces not tabs in language.h.
...
Catch unlikely but possible error and head crash when using
Z_PROBE_REPEATABILITY_TEST
2015-04-01 19:22:05 -05:00
Scott Lahteine
66b3b53e76
Merge pull request #1762 from AnHardt/MiMa
...
Fix MIN&MAX temperatures again
2015-04-01 16:52:07 -07:00
Edward Patel
6b91b7b411
Mesh bed leveling: Added G29 S3 + finer steps in manual probing.
...
* Use "G29 S3 Xn Yn Zn.nn" to modify bad probed point manually
* Changed manual Z steps from 0.05 to 0.025 and made brought it to Configuration.h
2015-04-01 21:18:51 +02:00
Chris Roadfeldt
26dc80bf2d
Typo fixed...
2015-04-01 13:47:17 -05:00
Chris Roadfeldt
2966ae2022
Fix Z_PROBE_PING not declared, allows code to compile if Z_PROBE_ENDSTOP
...
is not used.
2015-04-01 13:32:25 -05:00
Wurstnase
67d5e7973e
old bump_divisor for cartesian/corexy-printer
...
some people are starting to ask why homing is so slow. this is the old standard hard-coded value.
2015-04-01 20:17:49 +02:00
Chris Roadfeldt
bb41edc2ef
Fixed extra #endif
2015-04-01 12:13:25 -05:00
Chris Roadfeldt
a57862e29f
Cleaning up code in prep for merge with upstream.
2015-04-01 11:40:24 -05:00
Chris Roadfeldt
745d9fe1a4
Merge remote-tracking branch 'MarlinFirmware/Development' into Merge_cleanup
...
Conflicts:
Marlin/Marlin_main.cpp
2015-04-01 10:31:02 -05:00
AnHardt
488666832b
Remove the previously introduced ()
2015-04-01 13:40:05 +02:00
Scott Lahteine
443468df8d
Merge pull request #1771 from AnHardt/iss1770
...
Added new - changed entries from Fix up LCD_PROGRESS_BAR
2015-04-01 02:13:30 -07:00
Scott Lahteine
9593f09b99
Merge pull request #1764 from thinkyhead/probe_leveling
...
Fix homing and leveling
2015-04-01 02:00:39 -07:00
Scott Lahteine
72c7de3570
Cleanup M48
2015-04-01 01:48:45 -07:00
Scott Lahteine
97a258b0b0
Clean up, document home_axis
2015-04-01 01:44:13 -07:00
AnHardt
831016b09f
Added new - changed entries from Fix up LCD_PROGRESS_BAR
...
for when no LCD is defined.
Fix for #1770 .
2015-04-01 10:17:17 +02:00
Chris Roadfeldt
a508d835db
Changed Z_PROBE_AND_ENDSTOP to Z_PROBE_ENDSTOP.
...
Updated documentation in Configuration.h.
Cleaned up and commented some code relating to Z_PROBE_ENDSTOP.
Separated Z_MIN_ENDSTOP and Z_PROBE_ENDSTOP completely.
2015-04-01 02:14:55 -05:00
Chris Roadfeldt
fdb4ddbdea
Merge remote-tracking branch 'MarlinFirmware/Development' into Development
2015-04-01 00:52:08 -05:00
atfield90
d273c90d53
Added support for Atmega 1281 chip
2015-04-01 05:15:27 +02:00
Scott Lahteine
1c7391717e
Include sync_plan_position_delta for SCARA also
2015-03-31 19:58:03 -07:00
Scott Lahteine
8231fb166d
Merge pull request #1758 from AnHardt/MENU_MULTIPLIER_ITEM
...
Fix: Audio feedback for MENU_MILTIPLIER_ITEM click
2015-03-31 19:29:48 -07:00
Scott Lahteine
0b57a2ab8b
Merge pull request #1757 from bq/Translation-strings
...
Added new trasnslatable labels.
2015-03-31 18:56:25 -07:00
Scott Lahteine
18bb6be80e
Fix homing and leveling
...
- Include the current Z when raising the axis after and between probing
- Add `sync_plan_position_delta` for parity with `sync_plan_position`
- Clean up and clarify `M48`, `dock_sled`, and others
2015-03-31 18:52:19 -07:00
AnHardt
3f2e863206
Improve conditions for HAS_TEMP
...
and use them in temperuture.h
Flattened the if structure - the preprocessor is doing the work - not the Arduino. Arduino.
2015-04-01 02:56:14 +02:00
AnHardt
85f8a26ba4
Fix MIN&MAX temperatures again
...
replaced GE0 with th matching GEX in the second row.
added some ()
2015-04-01 00:48:04 +02:00
AnHardt
19b11dfdd7
Fix can't enter MENU_MULTIPLIER_ITEM
2015-03-31 18:29:16 +02:00
Chris Roadfeldt
c89b8368ee
Merge remote-tracking branch 'MarlinFirmware/Development' into Development
...
Conflicts:
Marlin/Marlin_main.cpp
2015-03-31 11:08:36 -05:00
Ivan Galvez Junquera
d08782386b
Added new trasnslatable labels.
...
* Added MSG_END_HOUR and MSG_END_MINUTE labels to all language files.
* Available translations:
EN, FR, DE, ES, IT, PT, PT-BR.
2015-03-31 16:59:43 +02:00
Scott Lahteine
97a69d9b1c
Correct XYZ after obtaining plan_bed_level_matrix
...
The current position needs to be updated by using the inverse
`plan_bed_level_matrix` on X, Y, and Z. All moves in the planner are
transformed by the `plan_bed_level_matrix` from this point forward.
2015-03-31 04:24:13 -07:00
Scott Lahteine
5f6962dd90
Merge pull request #1755 from thinkyhead/fixup_config
...
Raise when not retracting
2015-03-31 03:47:01 -07:00
Scott Lahteine
ae89ccd2c7
Use Z_RAISE_BETWEEN_PROBINGS
2015-03-31 03:45:21 -07:00
Scott Lahteine
9a5a7a3f68
Raise when not retracting
...
Code to raise the probe before retraction is good, but the code should
always raise the probe, not just when retracting
2015-03-31 03:38:03 -07:00
Scott Lahteine
6ff1620fcb
Merge pull request #1753 from thinkyhead/fix_extruder_offset
...
Fix EXTRUDER_OFFSET compiler error
2015-03-31 03:21:45 -07:00
Scott Lahteine
cda4bd4ad9
Correct the comment about M206
2015-03-31 03:20:15 -07:00
Scott Lahteine
935592cf6a
offsets off by default
2015-03-31 02:50:52 -07:00
Scott Lahteine
2a45922afe
Restore extruder_offset, init more simply
2015-03-31 02:49:47 -07:00
Scott Lahteine
28792e5731
Fix typo in assignment
2015-03-31 02:10:49 -07:00
Scott Lahteine
bb6174524f
Fix EXTRUDER_OFFSET compiler error
...
- Addressing issue #1741
2015-03-31 02:08:57 -07:00
Scott Lahteine
571652c49b
Fix LCD click
...
- Make the default LCD click sound more pleasant
- Fix warnings about bed temperature runaway
2015-03-31 01:41:24 -07:00
Chris Roadfeldt
45ece5afb1
Merge remote-tracking branch 'MarlinFirmware/Development' into Development
2015-03-31 03:07:57 -05:00
Chris Roadfeldt
17707e7479
Fixed Z_PROBE_PIN pullup bug.
...
Documented some additional areas that should be addressed if Z_PROBE is
fully separated from Z_MIN or Z_MAX.
Fixed a documentation error in sanity checks. Servos start at 0 not 1.
2015-03-31 02:56:41 -05:00
Scott Lahteine
21ab44cfa7
Merge pull request #1750 from thinkyhead/fixup_config
...
Bring all configs up to date
2015-03-30 23:49:04 -07:00
Scott Lahteine
50145266cd
Merge pull request #1748 from thinkyhead/raise_before_homing
...
Apply Z_RAISE_BEFORE_HOMING before homing XY
2015-03-30 23:37:41 -07:00
Scott Lahteine
a117b6bff6
Merge pull request #1747 from thinkyhead/progress_bar_tweak
...
Fix up LCD_PROGRESS_BAR
2015-03-30 23:37:28 -07:00
Scott Lahteine
3348b3bf0c
Allow SD_FINISHED_RELEASECOMMAND to be undefined
2015-03-30 23:31:48 -07:00
Scott Lahteine
82794fa5f7
Add delta generic not renaming
2015-03-30 23:25:04 -07:00
Scott Lahteine
ba2c7cb467
Update configs with all the latest
2015-03-30 23:24:33 -07:00
Chris Roadfeldt
ec1d9c0b8f
Use Z_PROBE_ENDSTOP_INVERTING when checking pin status.
2015-03-31 01:06:01 -05:00
Chris Roadfeldt
3175c70c79
Manually synching back up with MarlinFirmware/Development.
2015-03-31 00:11:11 -05:00
Chris Roadfeldt
faac2af4af
Merge remote-tracking branch 'origin/Development' into Development
2015-03-31 00:03:07 -05:00
Chris Roadfeldt
3be00cce6f
Merge remote-tracking branch 'MarlinFirmware/Development' into Development
...
Conflicts:
Marlin/Configuration.h
2015-03-30 23:59:01 -05:00
Chris Roadfeldt
e08f8eed05
Revert 06f767d..cba5692
...
This rolls back to commit 06f767d608
2015-03-30 23:51:36 -05:00
Scott Lahteine
5e82ed4f30
Restore ENDSTOPPULLUPS in Configuration.h
2015-03-30 21:15:16 -07:00
Chris Roadfeldt
992b07ca57
Don't disable Z_RAISE_BEFORE_HOMING when Z_PROBE_AND_ENDSTOP is enabled.
2015-03-30 22:58:10 -05:00
Chris Roadfeldt
cba5692673
Merge remote-tracking branch 'MarlinFirmware/Development' into Development
...
Conflicts:
Marlin/Marlin_main.cpp
Marlin/stepper.cpp
2015-03-30 22:33:05 -05:00
Scott Lahteine
8500c80b33
Apply Z_RAISE_BEFORE_HOMING before homing XY
2015-03-30 20:22:21 -07:00
Scott Lahteine
92b54aa27e
#define HAS_POWER_SWITCH
2015-03-30 19:44:53 -07:00
Scott Lahteine
5519882eea
Fix up LCD_PROGRESS_BAR
...
- Some messages should not expire with `PROGRESS_MSG_EXPIRE`.
- Simplify conditional for progress bar with sanity checks.
- Rename `messageTick` to `expireStatusMillis` and make it the expire
time.
2015-03-30 18:00:54 -07:00
Scott Lahteine
6864280803
Use elif and parentheses in conditionals
2015-03-30 16:52:27 -07:00
Scott Lahteine
8c136a5ab5
Conditionals and comments for PS = 0
2015-03-30 16:50:05 -07:00
Scott Lahteine
2faed961ce
Allow POWER_SUPPLY 0 for no power switch
2015-03-30 16:39:47 -07:00
Scott Lahteine
baa6787393
Merge pull request #1740 from thinkyhead/fixup_homing
...
Apply leveling for DELTA
2015-03-30 15:45:33 -07:00
AnHardt
9ac7dc675e
Make filament display on dogm_... same as hitachi...
...
Thanks @MagoKimbra.
2015-03-30 16:56:21 +02:00
AnHardt
50a732360a
Replace extrudemultiply by extruder_multiply[active_extruder]
...
Fix for #1460 .
Seems to work with only one extruder. Can't test this myself with more.
2015-03-30 13:35:03 +02:00
Scott Lahteine
e63076504d
Merge pull request #1733 from AnHardt/c20
...
Get back folder symbols on Hitachi displays
2015-03-30 01:57:00 -07:00
Scott Lahteine
41d258697a
Pass the z for after probing to retract_z_probe
...
A `z_before` value is passed to probe_pt, but the `retract_z_probe`
function assumes that Z is 0, doesn’t add `current_position[Z_AXIS]` as
other cases do. This may be superfluous, so this is a test, and will be
reverted if it has no effect.
2015-03-30 00:45:02 -07:00
croadfeldt
06f767d608
Merge remote-tracking branch 'upstream/development' into development
2015-03-30 02:10:49 -05:00
Scott Lahteine
b47fa8c064
Merge pull request #1735 from AnHardt/compilerCandy
...
Remove some further warnings
2015-03-29 23:55:19 -07:00
Scott Lahteine
e96db1cd6c
Make G29 shared function inline
2015-03-29 23:21:39 -07:00
Scott Lahteine
d73b169de3
Apply leveling for DELTA,
...
- Fix `prepare_move` function not calling `adjust_delta`
- Add more shorthand for plan_buffer_line.
- Fix wrong `federate` usage, assuming they are all mm/m
- Minor `stepper.cpp` cleanup
2015-03-29 23:16:12 -07:00
Scott Lahteine
85b67e5223
Merge pull request #1738 from thinkyhead/fixup_homing
...
Fix G29 E and M48 n
2015-03-29 20:08:19 -07:00
Scott Lahteine
ce44bee28b
Small code reduction
2015-03-29 19:45:14 -07:00
Scott Lahteine
0213f7f016
Cleanup case for M666
2015-03-29 19:39:43 -07:00
Scott Lahteine
803425e12c
Fix G29 E and M48 n
...
- Users prefer `G29 E` to work like `M48 E` so fixed that
- `M48 n` replaced with `M48 P` (or `p`). `n` legacy support
- Shorten some strings to save precious bytes
- Smaller code for 3-point probing
2015-03-29 18:56:09 -07:00
Scott Lahteine
1e9999711c
Merge pull request #1736 from thinkyhead/fixup_homing
...
Fix G28 homing Y with X
2015-03-29 18:27:17 -07:00
Scott Lahteine
d738b7acdd
Merge pull request #1724 from Natealus/Development
...
Viki 2 Pins from Manual and Azteeg X3 Pro Endstop Reswap
2015-03-29 18:26:32 -07:00
Scott Lahteine
e8ae51bfe3
Fix G28 homing Y with X
...
- Fixed a typo causing G28 to home incorrectly
- Added documentation to G28
- Added homeXYZ bools to neaten the code
- Added a note about home_offsets being questionable
2015-03-29 18:06:59 -07:00
AnHardt
7b2550a604
Times can't be negative.
...
cardreader.cpp needs temperature.h for autotempShutdown() when
AUTOTEMP is defined but warns about unused variables.
Unpublished variables by putting them in to temperature.cpp.
2015-03-30 01:58:46 +02:00
AnHardt
507efa771b
Remove unused variable fan_rot
...
and satisfy the compiler about the implicit compare.
2015-03-30 01:46:38 +02:00
AnHardt
2b959a7752
Some additional {} to make the compiler happy.
2015-03-30 01:42:35 +02:00
AnHardt
0f1bd6e4a7
In ST7920_SWSPI_SND_8BIT(uint8_t val) parameter is unsigned
...
therefor in macro ST7920_WRITE_BYTE(a) cast a to uint8_t
to make the compiler happy.
2015-03-30 01:40:58 +02:00
AnHardt
81bab8739d
Get back folder symbols on Hitachi displays
...
and make use of column 20.
2015-03-29 17:29:48 +02:00
Chris Roadfeldt
a9802c95b3
Ensure Z_PROBE_PIN is defined if Z_PROBE_AND_ENDSTOP is.
2015-03-29 04:18:37 -05:00
Chris Roadfeldt
62834a1c43
Don't deploy probe on Z Axis homing if Z_PROBE_AND_ENDSTOP is enabled,
...
unless Z_SAFE_HOMING is.
2015-03-29 03:55:41 -05:00
Chris Roadfeldt
666fad3494
Typo fixed in sanity check.
2015-03-29 03:25:03 -05:00
Chris Roadfeldt
08a7aa16c5
Don't deploy Z Probe on Z homing if Z_PROBE_AND_ENDSTOP is defined.
2015-03-29 03:21:48 -05:00
Chris Roadfeldt
80285251cc
More config cleanup work for Z_PROBE_AND_ENDSTOP.
2015-03-29 03:06:20 -05:00
Chris Roadfeldt
fe4549cd83
Config file Z_PROBE_AND_ENDSTOP description clean up.
2015-03-29 03:04:59 -05:00
Chris Roadfeldt
82d2f11129
More additional sanity checks for Z_PROBE_AND_ENDSTOP
2015-03-29 02:53:55 -05:00
Chris Roadfeldt
05134f0807
Additional Sanity Checks for Z_PROBE_AND_ENDSTOP
2015-03-29 02:51:51 -05:00
Chris Roadfeldt
c75a5e8c55
Fixed typo for Z_PROBE_AND_ENDSTOP support in pins_RAMPS.h.
...
Confirmed Sanity checks are working.....
2015-03-29 02:38:08 -05:00
Chris Roadfeldt
a98ac4033b
Added Z_PROBE_PIN to #define for Z_PROBE_AND_ENDSTOP support.
2015-03-29 02:36:26 -05:00
Chris Roadfeldt
6125124d6c
Config file cleanup for Z_PROBE_AND_ENDSTOP support.
2015-03-29 02:29:16 -05:00
Chris Roadfeldt
324c14943b
Bug fixes for Z_PROBE_AND_ENDSTOP.
...
Code cleanup for Z_PROBE_AND_ENDSTOP.
Added Z_PROBE_PIN to pins_RAMPS_13.h
2015-03-29 02:16:09 -05:00
Natealus
ca5821aa57
Made #ifdef DELTA branch instead
...
Another fellow here gave me the idea to do it this way
2015-03-29 01:08:00 -06:00
Natealus
04fda6b3e9
Undesired behavior with endstops swapped
...
Made my swap commented out so its the option not the default.
2015-03-29 00:55:47 -06:00
Natealus
ca1477d830
Revert "Undesired behavior with endstops swapped"
...
This reverts commit 15028e9b08
2015-03-29 00:52:53 -06:00
Natealus
15028e9b08
Undesired behavior with endstops swapped
...
I made my changes to swap MIN and MAX endstops on the Azteeg X3 Pro the
option rather than the default to fix unexpected reversal.
2015-03-29 00:42:40 -06:00
Nate Stokes
18245c6cd2
Update pins_RAMBO.h
...
Updated for the changes that Thinkyhead made before I submitted mine.
2015-03-28 22:29:54 -06:00
Natealus
234a9d0b12
Viki 2 Pins from Manual
...
I added in the pins into the new board files for the Azteeg X3, X3 Pro,
Printrboard, and Rambo. I'm sure it can be added for others too but
these are the manual specified pins. Just like many things here though,
I can't test for the boards other than the Azteeg X3 Pro. Hopefully it
works smoothly for everyone who happens on this nifty display. :)
2015-03-28 22:11:12 -06:00
Scott Lahteine
a22efc5f11
Merge pull request #1597 from Wurstnase/g29_auto_script
...
G29 auto script
2015-03-28 20:54:17 -07:00
Scott Lahteine
62a3da9618
Merge pull request #1723 from thinkyhead/tweak_g92
...
Tweak G92
2015-03-28 20:53:37 -07:00
Scott Lahteine
afff968e88
ARRAY_BY_EXTRUDERS, shorthand to sync planner
...
- Add some documentation to planner and stepper headers
- Patch up RAMBO pins with undefs
- Add `sync_plan_position` inline to set current XYZE
- Swap indices in `extruder_offset` to fix initialization values
2015-03-28 20:33:21 -07:00
Scott Lahteine
2b0c25a091
Tweak G92 to call plan_set_position only once, yes?
2015-03-28 19:18:24 -07:00
Natealus
22bea37393
Azteeg X3 Pro Pin Revisions
...
I added the fan pins in here and left them at -1 in configuration_adv.h
and it works fine. Pinned for a 4 extruder from 1-4 and HE5 being the
controller fan, HE6 being the Extruder Auto Fan/Water pump in the Kraken
case, and HE7 being for part cooling fan. Added in descriptions for the
MIN MAX pin swap and for servo motor additions.
2015-03-28 20:14:42 -06:00
Scott Lahteine
93dc0d0518
Merge pull request #1718 from AnHardt/blink
...
Move variable blink from ultralcd.h to dogm_lcd_implementation.h
2015-03-28 16:20:33 -07:00
Scott Lahteine
edb67ea165
Patch generic delta config
...
- Addressing issue mentioned at #1699
2015-03-28 14:13:25 -07:00
AnHardt
c481c3b180
Move variable blink from ultralcd.h to dogm_lcd_implementation.h
...
to avoid warnings about unused blink.
Concentrate definitions of variables in dogm_lcd_implementation.h to one place.
Make only local used variable currentfont static.
2015-03-28 13:14:38 +01:00
Chris Roadfeldt
059052889f
Further Sanity Checks for Z_PROBE_AND_ENDSTOP.
2015-03-28 06:08:04 -05:00
Chris Roadfeldt
8b81f20c61
Filling in more places where Z_PROBE_PIN and Z_PROBE_AND_ENDSTOP need to
...
be.
Added Sanity Check for it.
Added hook so it's enabled.
2015-03-28 05:55:42 -05:00
Chris Roadfeldt
fd823449ad
Added serial message for Z Probe trigger.
2015-03-28 05:42:38 -05:00
Chris Roadfeldt
92eb8109ab
Fix declaration of old_z_probe_endstop.
2015-03-28 05:09:48 -05:00
Chris Roadfeldt
44b88b41a2
Added credit for code.
2015-03-28 05:01:04 -05:00
Chris Roadfeldt
2979b40a7a
Fixed typo in Z Probe and Endstop section.
2015-03-28 04:41:03 -05:00
Chris Roadfeldt
9f3ff14008
Enabled separate Z Probe and Z Axis endstop use at same time.
...
Typo fixes in comments in existing code.
2015-03-28 04:31:51 -05:00
Scott Lahteine
b14be7235e
Merge pull request #1585 from galexander1/strtod_e_fix
...
Fix `code_value` (so `G1X1E2` isn't evaluated as `G1 X100 E2`)
2015-03-27 20:49:03 -07:00
Scott Lahteine
ba871e46bf
Fix compiler warnings
...
- Patched up for most included configurations
2015-03-27 20:29:05 -07:00
Scott Lahteine
ffe0df4b36
Latest upstream commits
2015-03-27 18:30:56 -07:00
Scott Lahteine
bc2f249cc6
Merge pull request #1622 from AnHardt/tm-utf-minus-kanji
...
The big Language Pack
2015-03-27 18:24:19 -07:00
Scott Lahteine
abfcbd793f
Merge pull request #1693 from chris-bo/rework_lcd_beeper
...
use only one implementation for beeper feedback
2015-03-27 17:03:38 -07:00
Scott Lahteine
55739a4efe
Fix Z_APPLY_STEP
2015-03-27 17:02:11 -07:00
Scott Lahteine
df02b992b0
Fix redundant_temperatrure_raw setting
2015-03-27 16:37:22 -07:00
Scott Lahteine
fe29bdd72b
Also fix temperature externs
2015-03-27 16:26:07 -07:00
Scott Lahteine
578f93bc26
Fixup temp arrays and leveling equation, prepare for merge
2015-03-27 16:20:23 -07:00
Scott Lahteine
7d472367e2
Merge pull request #1713 from epatel/Development
...
Parentheses need here otherwise sanitycheck.h does wrong thing on line 222
2015-03-27 16:14:55 -07:00
Scott Lahteine
ce485175eb
Give all temp arrays 4 indices
2015-03-27 16:11:28 -07:00
Edward Patel
782464ea4d
Parentheses need here otherwise sanitycheck.h does wrong thing on line 222
2015-03-27 20:22:59 +01:00
Scott Lahteine
460f73056b
Fix ECHOPAIR ambiguity
...
- Also patch up some warnings
2015-03-27 00:46:39 -07:00
Scott Lahteine
19d418cd6a
Fix up the code to eliminate warnings
2015-03-27 00:32:58 -07:00
Scott Lahteine
b2496533c6
Put " M" into pmem
2015-03-26 20:30:14 -07:00
Scott Lahteine
267d6bef15
Eliminate most warnings
...
- Fix a bug reading `code_value` for `M503 Sn`
- Hide and remove unused variables
2015-03-26 20:07:17 -07:00
Scott Lahteine
3fd7790a15
Merge branch 'Development' into fixup_leveling
...
Latest upstream commits
2015-03-26 19:56:58 -07:00
Scott Lahteine
b76a352d41
Fix the planeNormal calculation
2015-03-26 17:14:07 -07:00
Scott Lahteine
410f64782a
Always 4 temp sensors
2015-03-26 16:22:21 -07:00
Scott Lahteine
0b32431551
Remove abs() from planeNormal.z
2015-03-26 16:20:23 -07:00
Scott Lahteine
53169d96e8
Set temp_meas_ready in set_current_temp_raw
2015-03-26 16:02:15 -07:00
Scott Lahteine
06eb7f5b3c
Latest upstream commits
2015-03-26 15:30:51 -07:00
Scott Lahteine
04328d7537
Add zprobe_zoffset in set_bed_level_equation_*
...
- Also a small tweak to SanityCheck.h
2015-03-26 15:29:16 -07:00
Scott Lahteine
d2e73545ba
Merge pull request #1705 from AnHardt/ddt
...
Avoid warnings in SanitiCheck.h
2015-03-26 15:16:37 -07:00
Scott Lahteine
78090275a9
Fix probe range editing
...
- Increase the probe offset range to -20…20
- Apply the range limits to the menu item
2015-03-26 13:52:48 -07:00
AnHardt
1ff6df8f9e
Avoid warnings in SanitiCheck.h
...
/SanityCheck.h:107:53: warning: missing terminating ' character
...
2015-03-26 21:30:53 +01:00
AnHardt
ebe5b87c2c
< like in the oher compareble loops
...
to avoid:
Marlin_main.cpp:1790: warning: array subscript is above array bounds.
2015-03-26 21:18:19 +01:00
AnHardt
20f909567a
Merge https://github.com/MarlinFirmware/Marlin into tm-utf-minus-kanji
...
Conflicts:
README.md
Solved
2015-03-26 10:05:00 +01:00
Christian Bohn
eab5fad539
code formatting
2015-03-26 09:00:34 +01:00
Scott Lahteine
abadeac08d
Group zprobe_zoffset with bed leveling
2015-03-25 23:06:33 -07:00
Scott Lahteine
9e8427f253
Merge pull request #1698 from zeuseye/Development
...
Clean "fromsd" array if not SDSUPPORT
2015-03-25 22:21:57 -07:00
Scott Lahteine
32331faee4
Prettify Bed Level Correction Matrix
...
- Put + in front of positive values in the output
2015-03-25 22:13:59 -07:00
Scott Lahteine
f5f4c2b366
Merge branch 'Development' into fixup_leveling
...
Latest upstream commits
2015-03-25 21:30:49 -07:00
Scott Lahteine
7667023817
Merge pull request #1694 from Wurstnase/fix_z_config
...
comment #define Z_DUAL_STEPPER_DRIVERS
2015-03-25 21:28:17 -07:00
Scott Lahteine
5eff15c409
Merge branch 'Development' into fixup_leveling
...
Latest upstream commits
2015-03-25 21:24:38 -07:00
Scott Lahteine
ad05a726c1
Merge pull request #1691 from AnHardt/PID_dt
...
Move definition of PIDdT back to temperature.h
2015-03-25 21:22:39 -07:00
Scott Lahteine
5261d35737
Fix custom m-code behavior
...
Don’t set CUSTOM_M_CODE_SET_Z_PROBE_OFFSET if there’s no Z probe
2015-03-25 21:20:50 -07:00
Scott Lahteine
fbf9b21e0c
Merge plus fixup zprobe_zoffset
...
- Make `zprobe_zoffset` conditional
- Fix ConfigurationStore for `zprobe_zoffset`
2015-03-25 21:14:00 -07:00
Scott Lahteine
96b5da7198
Fix up bed leveling code
...
- Init `zprobe_zoffset`
- Remove `current_position[Z_AXIS] = zprobe_zoffset` lines from the
`set_bed_level_equation_*` functions
- Apply standards to `mesh_bed_leveling` files
- Document `MESH_BED_LEVELING`
2015-03-25 20:36:24 -07:00
Scott Lahteine
02b4f5f9cd
Merge pull request #1689 from AnHardt/MAXand161
...
Fix MAX6675 again and introduce set_current_temp_raw()
2015-03-25 20:23:51 -07:00
AnHardt
f680e509c4
Enclosed error-messages for TEMP_SENSOR_1_AS_REDUNDANT in PSTR()
2015-03-25 23:26:06 +01:00
Victor Torre
d43d47da14
Clean "fromsd" array is not SDSUPPORT
...
if not have SDSUPPORT the fromsd array is not necessary
2015-03-25 22:05:18 +01:00
AnHardt
ac81b4084f
Make variables and function static.
2015-03-25 21:37:15 +01:00
alexborro
55025558dc
Implement Dry-Run mode in G29
...
It just probe all the bed without appliying the matrix.
Useful after a first G29 to check the topology.
2015-03-25 11:12:30 -03:00
wurstnase
a4ad9117dd
comment #define Z_DUAL_STEPPER_DRIVERS
2015-03-25 13:46:29 +01:00
chris-bo
2dfd0e5ce7
Update Configuration.h
...
documentation how to disable buzzer feedback
2015-03-25 12:44:29 +01:00
Christian Bohn
4c3cbc0961
use only one implementation for beeper feedback
2015-03-25 12:23:50 +01:00
AnHardt
01cc97a3c3
Corected condition for PIDdT
2015-03-25 12:08:23 +01:00
AnHardt
94330705c7
Move definition of PIDdT back to temperature.h
...
make it unconditional
remove all definitions in the 'Configuration.h's
remove form 'Conditionals.h'
2015-03-25 11:51:41 +01:00
AnHardt
dd0067afa6
Fix MAX6675 again and introduce set_current_temp_raw()
...
to make the temperature-code work again with Arduino 1.0.6.
Sorry could not make an extra block on base level.
2015-03-25 11:08:24 +01:00
AnHardt
8848b7e9ef
Add the missed {} to END_MENU in ultralcd.cpp
...
what caused an extra update of encoderLine most of the time.
2015-03-25 09:48:21 +01:00
AnHardt
4beffbca69
Make SMALL_INFOFONT configurable.
...
Tweak the documentation
2015-03-24 23:40:04 +01:00
CONSULitAS
045ea42cc8
Merge remote-tracking branch 'upstream/Development' into Development
2015-03-24 22:52:02 +01:00
alexborro
c2ba5d0c09
Fix ZigZag and Topograph table
...
ZigZag: Inverted Behavior.. If T supplied, it does not zigzag.
Topograph table: The table was rotated 90º clockwise.
2015-03-24 15:50:31 -03:00
alexborro
0ce3576685
New Feature: Z_DUAL_ENDSTOPS
...
Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z
steppers - Let's call them Z stepper and Z2 stepper.
That way the machine is capable to align the bed during home, since both
Z steppers are homed.
There is also an implementation of M666 (software endstops adjustment)
to this feature.
After Z homing, this adjustment is applied to just one of the steppers
in order to align the bed.
One just need to home the Z axis and measure the distance difference
between both Z axis and apply the math: Z adjust = Z - Z2.
If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it
is.. think about it) and the Z adjust would be positive.
Play a little bit with small adjustments (0.5mm) and check the
behaviour.
The M119 (endstops report) will start reporting the Z2 Endstop as well.
2015-03-24 14:06:44 -03:00
AnHardt
c686069ccd
Revert "Remove 6x9 font"
...
This reverts commit e6cb8ee188
2015-03-24 17:13:05 +01:00
AnHardt
b00a531df8
Revert "Removed now unneded FONT_STATUSMENU"
...
This reverts commit 8c5bb38748
2015-03-24 17:01:56 +01:00
AnHardt
9d589cbb2a
Merge https://github.com/MarlinFirmware/Marlin into tm3-utf-minus-kanji
...
Conflicts:
Marlin/example_configurations/delta/generic/Configuration.h
Marlin/example_configurations/delta/kossel_mini/Configuration.h
Marlin/language.h
Conflicts solved
2015-03-24 16:59:15 +01:00
Scott Lahteine
8db4fd7177
Merge branch 'Development' into planner_oh_planner
...
Latest upstream commits
2015-03-23 22:08:50 -07:00
Scott Lahteine
0d81abe1c9
Merge branch 'Development' into config_testing
...
Latest upstream commits
2015-03-23 21:13:04 -07:00
Scott Lahteine
01740fd9c6
Merge branch 'Development' into planner_oh_planner
...
Latest upstream commits
2015-03-23 21:12:36 -07:00
Scott Lahteine
fc53e43de6
Don't test raw temp for MAX6675
...
- Remove test of raw temp for thermistor 0 when using MAX6675
- Longer `raw_temp_value` array for `TEMP_SENSOR_1_AS_REDUNDANT`
2015-03-23 20:55:48 -07:00
Scott Lahteine
03fa9fae9f
Merge branch 'Development' into fix_temperature_minmax
...
Latest upstream commits
2015-03-23 20:42:48 -07:00
Scott Lahteine
1fac388664
Revert measurement loop
2015-03-23 15:18:22 -07:00
CONSULitAS
703f3b38c4
Merge remote-tracking branch 'upstream/Development' into Development
2015-03-23 17:40:49 +01:00
nicolas-rambaud
37cde8a191
Report changes from previous PR from old code base including :
...
I've updated the minimum values from the LCD.
It has been a while that i want to at least fix this.
I have an inductive probe and often i need to set my zOffset to something lower than 0.5.
With the current implementation, the default LCD value is set to 0.5 for some reason.
On my case i need to be able to set it down to 0.0 as my inductive probe can be lower than 0.5.
Before with the LCD we couldn't change this value below 0.5. We had to flash the firmware every time which was painful.
Now we are able to change this value down to 0.0 if needed.
I've also changed the minimum value for Z min acceleration.
In the default configuration it's set to 25 but on the LCD the minimum was 100 which is not coherent.
I've changes the minimum to 10. On this axis, depending on the mechanics/motor drivers we might require very low acceleration, so i guess 10 is somehow realistic.
2015-03-23 12:29:12 +01:00
Scott Lahteine
b26a3ea02c
Merge pull request #1662 from josla972/refactor_scara
...
Refactor SCARA calibration. Save some lines of code and possibly ROM.
2015-03-23 00:51:18 -07:00
wurstnase
e6f6c6e3a1
fix bad insertion config again
2015-03-23 08:32:48 +01:00
Scott Lahteine
6bdee87be3
Cleanup temperature code
...
- Get rid of unused temp states in the ISR, resulting in more frequent
temperature reading with fewer sensors
- Shrink code slightly in min/max testing
2015-03-23 00:27:29 -07:00
Scott Lahteine
34a41648ab
Merge branch 'Development' into planner_oh_planner
...
Latest upstream commits
2015-03-22 23:40:29 -07:00
Scott Lahteine
4fbb80567e
Get upstream commits
2015-03-22 23:07:22 -07:00
Scott Lahteine
7717e1ce33
Fix bad insert in configuration
2015-03-22 21:48:46 -07:00
Scott Lahteine
146501215f
Fix mangled probe_pt calls
...
- Address issue #1669
- Remove the TOPO_ORIGIN configuration setting
2015-03-22 21:45:20 -07:00
maverikou
15345cc249
Corrected Z_PROBE_ALLEN_KEY behaviour.
2015-03-22 13:54:51 +02:00
maverikou
0f034dd97e
Clean up Z_RAISE_AFTER_PROBING to work the same in all code paths except Z_PROBE_SLED.
2015-03-22 13:54:45 +02:00
maverikou
6c96f32069
Blind fix for #1507
2015-03-22 13:54:21 +02:00
Josef Larsson
379348487e
Removed malplaced comment.
2015-03-22 12:21:31 +01:00
Scott Lahteine
8bd6e37b21
Merge pull request #1661 from thinkyhead/G92_no_offset
...
Don't add home offsets in G29
2015-03-21 16:49:06 -07:00
Scott Lahteine
582cd780cd
Fix compile error with *_DUAL_STEPPER_DRIVERS
...
- Patch up macros in stepper.cpp
2015-03-21 16:43:47 -07:00
Josef Larsson
9b3462f73f
Refactor SCARA calibration. Save some lines of code and possibly ROM.
2015-03-22 00:37:24 +01:00
Scott Lahteine
691e753cc3
Don't add home offsets in G29
...
- Address #1262 by leaving values as set
- Rename `add_homing` to `home_offset`
2015-03-21 16:30:02 -07:00
Scott Lahteine
88e81a4804
Latest upstream commits, plus fixes
...
- Also add Manual Bed Leveling to the rest of the configs
2015-03-21 16:12:57 -07:00
Scott Lahteine
15eb5d35a2
Merge branch 'Development' into config_testing
...
Latest upstream commits
2015-03-21 15:42:45 -07:00
Scott Lahteine
19df90622b
Include Conditionals.h file in update
2015-03-21 15:40:20 -07:00
Scott Lahteine
9b639b4135
Merge pull request #1619 from epatel/manual-bed-leveling+mesh-bed-level
...
Manual bed leveling + mesh bed leveling
2015-03-21 15:39:42 -07:00
Scott Lahteine
2c9bd15625
Move LCD items to Conditionals.h
...
- `Conditionals.h` is included twice, setting LCD values the first time
2015-03-21 15:24:57 -07:00
Scott Lahteine
63abeaff38
Merge branch 'Development' into config_testing
...
Latest upstream commits
2015-03-21 15:03:06 -07:00
Scott Lahteine
3703694e30
Fix temperature min/max test
...
- Base tests on all thermistors/thermocouples, not just heater 0
2015-03-21 14:23:43 -07:00
Edward Patel
3d0a060a7a
Added G29 command
2015-03-21 14:50:47 +01:00
Edward Patel
c516747847
Merge branch 'Development' into manual-bed-leveling+mesh-bed-level
2015-03-21 14:49:52 +01:00
Scott Lahteine
af14c684b5
Minor optimizations to planner code
...
- Prefetch values used more than once
2015-03-20 20:57:06 -07:00
Scott Lahteine
13fbf42d95
Cleanup of planner code
...
- Use named axis indexes, `X_AXIS` etc.
- Replace `block.steps_A` with block.steps[A]`
- Replace `A_segment_time` with `segment_time[A]`
- Add `A_AXIS`, `B_AXIS` for `COREXY` axes
- Conditional compile based on `EXTRUDERS`
- Add BLOCK_MOD macro for planner block indexes
- Apply coding standards to `planner.h` and `planner.cpp`
- Small optimizations of planner code
- Update `stepper.cpp` for new `block` struct
- Replace `memcpy` with loops, let the compiler unroll them
- Make `movesplanned` into an inline function
2015-03-20 20:42:49 -07:00
AnHardt
64e3d33893
Fix shrinked menucode
...
by updating 'encoderPosition' in END_MENU() line 1.
2015-03-20 23:36:14 +01:00
Edward Patel
a7e89d4cfa
Merge branch 'Development' into manual-bed-leveling+mesh-bed-level
2015-03-20 15:46:01 +01:00
AnHardt
8c5bb38748
Removed now unneded FONT_STATUSMENU
2015-03-20 14:12:12 +01:00
Scott Lahteine
2176a22d42
Fix count_direction initializer
...
- Addressing #1625
2015-03-20 05:45:05 -07:00
AnHardt
e72cb3e45d
Merge https://github.com/MarlinFirmware/Marlin into tm2-utf-minus-kanji
...
Conflicts:
Marlin/dogm_lcd_implementation.h
Marlin/ultralcd_implementation_hitachi_HD44780.h
Fix merge conflicts 2
2015-03-20 13:35:47 +01:00
Scott Lahteine
cb6942d4a7
Merge branch 'Development' into config_testing
...
Get upstream commits
2015-03-20 05:30:36 -07:00
AnHardt
6bfccaf99e
Merge https://github.com/MarlinFirmware/Marlin into tm2-utf-minus-kanji
...
Conflicts:
Marlin/dogm_lcd_implementation.h
Marlin/ultralcd_implementation_hitachi_HD44780.h
Fixed conflicts 1
2015-03-20 13:08:18 +01:00
Scott Lahteine
5644ad6809
Fix hiliting of edit items
2015-03-20 04:29:35 -07:00
Scott Lahteine
63d5d28085
Merge branch 'Development' into config_testing
...
Latest upstream changes
2015-03-20 04:15:18 -07:00
Scott Lahteine
526a755a66
Merge pull request #1652 from AnHardt/PIDdebug
...
PID debug
2015-03-20 04:14:08 -07:00
Scott Lahteine
a1c240b0a4
Delta supports some auto bed leveling options
2015-03-20 04:04:45 -07:00
Edward Patel
5112cf8422
Added comment for the EEPROM storage
2015-03-20 11:46:47 +01:00
Edward Patel
4619d80524
Merge branch 'Development' into manual-bed-leveling+mesh-bed-level
2015-03-20 11:45:06 +01:00
Scott Lahteine
199151a4ed
Merge pull request #1650 from AnHardt/beautify
...
Beautivy statusscreen
2015-03-20 03:38:02 -07:00
Scott Lahteine
2424713a8f
Merge pull request #1640 from AnHardt/warning6
...
codepos not used in gcode_M28()
2015-03-20 02:58:00 -07:00
Scott Lahteine
b6d381f863
Divide up Conditionals to get LCD items early
2015-03-20 02:50:28 -07:00
AnHardt
e85061d20d
Added changes to the 'new' Configuration.h s
2015-03-20 10:36:29 +01:00
Scott Lahteine
33c7c6e11d
Conditionals.h requires Arduino.h
2015-03-20 01:27:14 -07:00
Scott Lahteine
8ade04b78e
Felix and Hephestos configs
...
- Not sure why these are showing as all new
2015-03-19 22:25:05 -07:00
Scott Lahteine
670006b919
Remove invariant code from Configurations
...
- Add `Conditionals.h` with calculated configuration values
- Add `SanityCheck.h` with checks for configuration errors
- Remove equivalent code from all configurations
- Move error checks from some sources to `SanityCheck.h` also
- Fix initialization of count_direction in stepper.cpp
2015-03-19 22:22:23 -07:00
Edward Patel
a61f679568
Merge branch 'Development' into manual-bed-leveling+mesh-bed-level
2015-03-20 02:28:35 +01:00
Edward Patel
c87faa69ed
Shortened mesh_plan_buffer_line()
2015-03-20 02:18:49 +01:00
AnHardt
47c1ea72af
Merge https://github.com/kieranc/Marlin into PIDdebug
...
Conflicts:
Marlin/temperature.cpp
Cleaned merge conflict.
Codeposition had changed.
Variable pid_input had vanished.
Signed-off-by: AnHardt <github@kitelab.de>
2015-03-20 00:07:36 +01:00
AnHardt
f1d3d1524d
Merge branch 'optimize_menu_code' of https://github.com/thinkyhead/Marlin into beautify
...
Conflicts:
Marlin/dogm_lcd_implementation.h
solved merge conflict.
2015-03-19 22:51:22 +01:00
AnHardt
fa889cd6e1
Beautivy statusscreen
...
by shifting things some pixels around
2015-03-19 22:13:37 +01:00
Scott Lahteine
7279e4f82f
Small code tweaks re lcd.print
2015-03-19 14:01:33 -07:00
Scott Lahteine
90ba61b9b8
Include indicator for new drawmenu_generic
...
In the new method we pass the character that should be used for
selected state, not the character to print always.
2015-03-19 13:49:06 -07:00
Scott Lahteine
15d29efad5
Pass sel to lcd_implementation_mark_as_selected
...
- Pass selected state directly to lcd_implementation_mark_as_selected
- Rename sel function parameter
- Include a minor fix for SdBaseFile.h
2015-03-19 13:40:36 -07:00
Scott Lahteine
a547dc2148
Merge branch 'Development' into optimize_menu_code
...
Get upstream changes
2015-03-19 13:31:37 -07:00
CONSULitAS
9c1f6e7ac7
Merge remote-tracking branch 'upstream/Development' into Development
2015-03-19 18:49:34 +01:00
alexborro
e650d4044e
Fix "Stop Print" function in the LCD menu
...
When one hit "Stop Print" option in LCD menu, the command buffer was not
cleared. The printer keep moving until the buffer has been emptied.
Actually I could not clear the command buffer as well.. I don't know
why, it doesnt work as expected.
I need to implement a routine inside Stepper ISR to handle such
situation.
2015-03-19 14:16:18 -03:00
AnHardt
e917477fec
Merge https://github.com/MarlinFirmware/Marlin into tm-utf-minus-kanji
...
Conflicts:
Marlin/dogm_lcd_implementation.h
Marlin/fonts/make_fonts.bat
Claerd conflicts with my own #1621 . (His was easy. :-) )
corrected typo in fonts/README.fonts
Applied changes to the new delta-configurations
and deletet there some extra whitespace at the line-endings.
2015-03-19 12:35:43 +01:00
AnHardt
ae01a6b5f2
Make use of codepos.
...
Saves one addition.
Needs one pointer on the stack.
Don't know if this is a go trade.
2015-03-19 09:45:16 +01:00
Scott Lahteine
a534ac197a
Merge pull request #1621 from AnHardt/remove--6x9-font
...
Remove 6x9 font
2015-03-18 23:10:42 -07:00
Scott Lahteine
80e0ee10ca
Merge pull request #1631 from AnHardt/iss1593
...
Decrease KILL_DELAY
2015-03-18 19:10:38 -07:00
Scott Lahteine
4ce79920e5
Merge pull request #1635 from AnHardt/warnings1
...
Negative times are unlikly
2015-03-18 19:10:12 -07:00
Scott Lahteine
76127b8a55
Merge pull request #1630 from Wurstnase/fix_g29
...
optional parameters must be named when ignoring order
2015-03-18 19:09:40 -07:00
Scott Lahteine
be3f2dc1d9
Merge pull request #1636 from AnHardt/warning2
...
lcd_control_retract_menu() is conditional.
2015-03-18 19:09:05 -07:00
Scott Lahteine
8d396584bf
Merge pull request #1637 from AnHardt/warning3
...
lcd_autostart_sd() has two conditions.
2015-03-18 19:08:33 -07:00
Scott Lahteine
8664c6d465
Merge pull request #1638 from AnHardt/warning4
...
delta[3] not used when DELTA not defined.
2015-03-18 19:07:55 -07:00
Scott Lahteine
10711ccc6a
Merge pull request #1639 from AnHardt/warning5
...
G4 could wait for an undefined time
2015-03-18 19:07:14 -07:00
Edward Patel
28c91deb5c
EEPROM saving of z_values.
...
Tried to make it a little intelligent.
2015-03-18 21:07:07 +01:00
Edward Patel
240b5cfe04
Merge branch 'Development' into manual-bed-leveling+mesh-bed-level
2015-03-18 19:19:46 +01:00
alexborro
4521f6655b
Restore "S" parameter of M204 for retrocompatibility.
2015-03-18 12:19:30 -03:00
alexborro
5ddb8d94e2
Update Documentation related to M204
2015-03-18 11:09:10 -03:00
AnHardt
f8c4d43886
delta[3] is used with SCARA
...
Shoot in the dark.
2015-03-18 12:14:49 +01:00
AnHardt
72a9fed4fb
codepos not used in gcode_M28()
...
Got:
Marlin_main.cpp:2567: warning: unused variable 'codepos'
Needs revision.
Don't now how this should look like.
2015-03-18 11:41:14 +01:00
AnHardt
b94dd33641
G4 could wait for an undefined time
...
Got:
Marlin_main.cpp:1689: warning: 'codenum' may be used uninitialized in this function
And indeed codenum is undefined when no parameter is given.
2015-03-18 11:23:41 +01:00
AnHardt
e90985a4e8
delta[3] not used when DELTA not defined.
...
got:
Marlin_main.cpp:387: warning: 'delta' defined but not used
Compiles cleaner when definition is removed.
2015-03-18 11:11:49 +01:00
AnHardt
5099b86ad4
lcd_autostart_sd() has two conditions.
...
got:
ultralcd.cpp:408: warning: 'void lcd_autostart_sd()' defined but not used
2015-03-18 10:51:13 +01:00
AnHardt
5d81c779cc
lcd_control_retract_menu() is conditional.
...
Got:
ultralcd.cpp:64: warning: 'void lcd_control_retract_menu()' declared 'static' but never defined
2015-03-18 10:39:59 +01:00
AnHardt
450b89e63c
Negative times are unlikly
...
While bunting an other bug I stumbled across:
ultralcd.cpp:1250: warning: comparison between signed and unsigned
integer expressions
Changed to the type of lcd_next_update_millis.
2015-03-18 10:31:34 +01:00
AnHardt
d1658eebfc
Decrease KILL_DELAY
...
Users hat to press kill-button for unexpexted lon times.
See #1593
2015-03-18 01:45:42 +01:00
Wurstnase
00adb2a6c1
optional parameters must be named when ignoring order
2015-03-18 01:02:29 +01:00
Edward Patel
0d43898a22
Remove of mesh_plan_buffer_line parameter reference (e)
2015-03-17 22:55:29 +01:00
Edward Patel
8067a985ce
Merge branch 'Development' into manual-bed-leveling+mesh-bed-level
...
Fixed conflicts:
Marlin/planner.h
2015-03-17 22:48:08 +01:00
wurstnase
05333f61b7
fix macro
2015-03-17 12:50:44 +01:00
AnHardt
1883e1bb60
Applied thinkyheads corrections from 2015-03-17
2015-03-17 11:23:44 +01:00
AnHardt
be79235ef2
Add new (cleaner) Marlin font
...
with sources in /fonts
2015-03-17 10:33:02 +01:00
Scott Lahteine
89fe77468d
Merge pull request #1586 from maverikou/delta_auto_bed_level
...
Delta auto bed level (Updated PR)
2015-03-16 18:17:11 -07:00
CONSULitAS
2b1ddc0413
Merge remote-tracking branch 'upstream/Development' into Development
2015-03-16 22:12:17 +01:00
alexborro
cb676cdf39
Fix CoreXY homing bug introduced by PR #1606
...
The Check Endstop logic must be:
if (current_block->steps_x != current_block->steps_y || (TEST(out_bits,
X_AXIS) == TEST(out_bits, Y_AXIS)))
if (TEST(out_bits, X_HEAD))
not
if (TEST(out_bits, X_HEAD) && (current_block->steps_x !=
current_block->steps_y || (TEST(out_bits, X_AXIS) == TEST(out_bits,
Y_AXIS))))
Same applies for Y axis.
2015-03-16 16:31:25 -03:00
AnHardt
8a29dd4839
Cleaned typo in dogm_lcd_implementation.h
2015-03-16 20:18:48 +01:00
AnHardt
7e69f72db6
Moved font directory. Updated README.fonts
2015-03-16 17:27:27 +01:00
AnHardt
00b162a993
Merge remote-tracking branch 'origin/utf-kanji' into tm-utf-minus-kanji
...
Conflicts:
Marlin/language.h
Conflict cleaned
2015-03-16 17:13:49 +01:00
AnHardt
e38dd5f030
Merge remote-tracking branch 'origin/utf' into utf-kanji
2015-03-16 17:00:54 +01:00
AnHardt
08e4651ece
Corrected cyrillic font again
...
Thank you @Nprod.
2015-03-16 16:59:14 +01:00
Wurstnase
752c804677
remove offset, add minimum scan area
2015-03-16 15:13:16 +01:00
Wurstnase
14f0250853
allow negative values
...
and some more comments
2015-03-16 14:26:59 +01:00
AnHardt
e6cb8ee188
Remove 6x9 font
...
in dogm_lcd_implementation.h
by using standard font and
shifting down temperature displays by one pixel
Saves 2300 bytes.
2015-03-16 11:18:27 +01:00
maverikou
e93eb3e8d3
Update test
2015-03-16 09:16:00 +02:00
maverikou
b8ae3feb9e
Update test
2015-03-16 09:03:15 +02:00
maverikou
3570447ded
Fix Z_RAISE_AFTER_PROBING
2015-03-16 08:35:49 +02:00
maverikou
8a739b6fba
Merge branch 'Development' into delta_auto_bed_level
...
Conflicts:
Marlin/Marlin_main.cpp
2015-03-16 08:24:26 +02:00
Scott Lahteine
7629c4f05c
Cleanup for menu optimization
...
- Compare pr_char to space
- Fewer calls to lcd_strlen
2015-03-15 22:54:54 -07:00
Scott Lahteine
3405f85a6a
Reduce size of menu code
...
- Get rid of _selected functions, passing selected state instead
2015-03-15 22:02:33 -07:00
Edward Patel
e983a5ab92
Disable option. Enable for use/test.
2015-03-16 02:50:11 +01:00
Edward Patel
f34b9c83d1
Added comment about MESH_NUM axis points.
2015-03-16 01:48:46 +01:00
Scott Lahteine
a686c9878f
Move TOPO_ORIGIN define to Configuration.h
...
- Addressing issue #1608
2015-03-15 15:49:36 -07:00
Edward Patel
8005d22c81
Added menu option for bed leveling.
2015-03-15 23:24:32 +01:00
Edward Patel
0e51e53813
WIP. Adding bed leveling code.
2015-03-15 23:24:32 +01:00
Scott Lahteine
d0d12962e0
Merge pull request #1615 from AnHardt/fix-1611
...
Fix #1611
2015-03-15 15:19:02 -07:00
AnHardt
f0dcea7e14
Fix #1611
...
Warning: suggest parentheses around comparison in operand of &
pretty much helped.
2015-03-15 22:52:50 +01:00
AnHardt
28b1c37dea
Fix for #1612
2015-03-15 21:35:33 +01:00
CONSULitAS
a8c1bdabd2
Update: readme.md for K8200 example
...
* readme.md: updated typo and URLs
2015-03-15 17:25:31 +01:00
AnHardt
2f374f1465
Removed Kanji.
2015-03-15 16:44:37 +01:00
Scott Lahteine
5efc798642
Merge pull request #1546 from apollo-ng/pr-felix
...
Added support for Felix 2.0/3.0 printers
2015-03-15 07:52:22 -07:00
Scott Lahteine
b83e52e50f
Merge pull request #1467 from thinkyhead/marlin_configurator
...
Configurator utility
2015-03-15 07:49:19 -07:00
Scott Lahteine
7bc77dc134
Merge pull request #1583 from galexander1/m404fix
...
M404 should not use 'N' address as parameter because 'N' is reserved
2015-03-15 07:47:30 -07:00
Scott Lahteine
b80ed51fcc
Fix controllerFan() code
...
- Add support for 4th extruder
- Fix parentheses matching
- Apply coding standards
- Address issue mentioned at #1575
2015-03-15 06:55:31 -07:00
Scott Lahteine
4b50205f11
Merge branch 'Development' into marlin_configurator
...
Latest upstream changes
2015-03-15 06:37:32 -07:00
Scott Lahteine
bb4cb1b15a
Merge pull request #1606 from thinkyhead/cleanup_stepper
...
Cleanup of stepper.cpp
2015-03-15 06:05:08 -07:00
Scott Lahteine
63f41f56f8
Merge pull request #1607 from chris-bo/Development
...
Update ultralcd_st7920_u8glib_rrd.h
2015-03-15 01:04:40 -07:00
Scott Lahteine
4eabd80025
Fix babystep for extruder_duplication
2015-03-14 18:31:25 -07:00
alexborro
d3259d0dba
Merge pull request #1581 from msutas/Development
...
Filament Runout Sensor Feature
2015-03-14 18:35:20 -03:00
AnHardt
25c4f17e5d
Corrected Cyrillic fonts. Round II.
2015-03-14 15:10:45 +01:00
chris-bo
b73ba26b23
Update ultralcd_st7920_u8glib_rrd.h
2015-03-14 14:31:00 +01:00
Scott Lahteine
c37f7d15c9
- Rename WRITE_E_STEP for consistency
...
- Add BIT and TEST macros
- Add _APPLY_ macros to stepper.cpp to help with consolidation
- Consolidate code in stepper.cpp using macros
- Apply standards in stepper.cpp
- Use >= 0 instead of > -1 as a better semantic
- Replace DUAL_Y_CARRIAGE with Y_DUAL_STEPPER_DRIVERS
2015-03-14 04:28:22 -07:00
AnHardt
44a205d9d9
Corrected Cyrillic fonts.
...
Cleaned typo in language_test.h Cyrillic part.
2015-03-14 12:27:47 +01:00
chrono
4d878b9bac
Fixed path typos in README
2015-03-14 10:18:12 +00:00
chrono
12ec557a75
Added DEFAULT_TRAVEL_ACCELERATION
2015-03-14 10:14:13 +00:00
chrono
1d25d510bc
Upstream Merge Fixes
2015-03-14 09:48:30 +00:00
chrono
a89d690b77
Merge remote-tracking branch 'upstream/Development' into pr-felix
2015-03-14 09:25:43 +00:00
Scott Lahteine
cb57fc727d
Declare pid_output for PIDBEDTEMP
2015-03-13 20:19:51 -07:00
Scott Lahteine
3d6deb9bdf
Simplify manage_heater
...
- Make separate get_pid_output(e) and get_pid_output_bed() function
- Reduce size of manage_heater function
- Hopefully work around linker errors
2015-03-13 19:49:41 -07:00
AnHardt
730497aaa1
Make use of ligatures in language_kana_utf8.h
2015-03-13 19:47:40 +01:00
AnHardt
3240d89f7d
Logic cleanup in utf_mapper.
2015-03-13 19:45:10 +01:00
alexborro
2f3c77b751
Fix decimal places in G29 Bed Equation Coeficients
2015-03-13 14:39:41 -03:00
AnHardt
96f8d20f2f
Change selection logic another time
...
Automatic selection was to unflexible.
Updated documentation
Updated language files to new logic and documentation.
Updated bdf2u8g.exe
2015-03-13 14:26:58 +01:00
Wurstnase
76da32b567
add hash-bang for python3
2015-03-13 07:44:20 +01:00
Wurstnase
2e7ba44633
some renaming for readability
2015-03-13 07:31:27 +01:00
Scott Lahteine
352aa3f4c5
Merge branch 'Development' into marlin_configurator
...
Latest upstream
2015-03-12 17:12:51 -07:00
Scott Lahteine
e3ca9137b5
Fix missing temp_error declarations
...
- Fix for #1591 replacing #1595
2015-03-11 16:38:42 -07:00
Wurstnase
0620267ebb
g29 auto-mode for the new G29 LRFB
...
short:
this script scans the first few lines from a gcode. If the line between 2 different z are greater than min_g1 this is our first layer. On this layer we search the min and max values of X and Y. With an offset we write that in a new file.
2015-03-11 23:53:28 +01:00
Scott Lahteine
08694339eb
Merge branch 'Development' into marlin_configurator
...
Conflicts:
Marlin/Configuration.h
2015-03-11 15:47:32 -07:00
Scott Lahteine
e4d77a6313
Merge pull request #1554 from 2PrintBeta/Development
...
Macro indirection for stepper drivers + Support for TMC26X and L6470 Stepper Drivers
2015-03-11 15:31:57 -07:00
Mehmet Sutas
b373826428
Merge pull request #2 from MarlinFirmware/Development
...
update
2015-03-12 00:07:39 +02:00
AnHardt
5bafb1fe1f
Add user test to language_test.h and make it default.
...
Improve description in Configuration.h
2015-03-11 20:46:52 +01:00
alexborro
c0b6075f77
Fix max acceleration limits in planner
...
The max acceleration limiting was in wrong place.
2015-03-11 15:08:11 -03:00
alexborro
9157cbd8f3
Add Travel Acceleration and change the M204 options
...
Added option to set Travel Acceleration (non printing moves).
The M204 options was a non sense (S for printing moves and T for retract
moves).
It has been changed to:
P = Printing moves
R = Retract only (no X, Y, Z) moves
T = Travel (non
printing) moves
I will add this info o G-Code wiki in reprap.org. I also advise to put
this info in Marlin next version changelog.
2015-03-11 13:19:02 -03:00
alexborro
888cf161bd
fix travel speed option for G29
...
I forgot to enclousure the variable with #ifdef
2015-03-11 10:03:32 -03:00
alexborro
af63b54562
Add travel speed option to G29 command line
2015-03-11 09:51:56 -03:00
AnHardt
817751d4b9
Added new languages, the Cyrillic display and a test language to find out your hardware.
2015-03-11 11:10:35 +01:00
AnHardt
c4b0087f7a
Insert utf_mapper.h
...
Top -> down
- Decide what output function is to use.
- Precautions. If non of the DISPLAY_CHARSET_HD44780's is selected fall back to Japanese.
- When we are not on the dogms setup a mapping table depending on display type and mapper.
- If we are on dogm we use ONE To ONE mapping - except kanji.
- select and define one of the mapping functions.
2015-03-11 10:55:16 +01:00
AnHardt
b60761bcff
Removed some messages that shouldn't be translated in the Japanese files.
...
And made falback to kana work.
2015-03-11 10:30:38 +01:00
AnHardt
97ae3c5c6a
Corected some errors inrtoduced by a faild global replacement.
2015-03-11 10:26:36 +01:00
AnHardt
ae76b1e8a8
Changes in dogm_lcd_implementation.h in detail.
...
Top -> down
- We don't need the old Marlion_font package any more - we made new.
- But we need information about configured fonts and the mappers.
- We support Cyrillic now.
- LCD_CLASS is not used in this file. LiquidCrystalRus.h is deleted anyway.
- define some fonts
- BIG_EDIT_FONT works only together with western languages.
- Select a matching FONT for the MENUE depending on the defined language.
- Number the different font-types. Wanted to avoid to store complete font-structures when changing fonts back and forth.
- Marlin special symbols are now at the lower end - like in 'ultralcd_implementation_hitachi_HD44780.h'
- insert the new remembering setFont function.
- insert the new counting lcd_print functions.
- make use of the new setFont and lcd_print functions.
- On some places redefined one character long strings with chars to avoid overhead and reduce warnings.
2015-03-10 22:34:56 +01:00
alexborro
5bf42066fa
Fix typo in configuration.h
2015-03-10 15:06:34 -03:00
alexborro
8a4b62d081
Set more regular setup in configuration.h
2015-03-10 14:41:21 -03:00
AnHardt
255ca68123
Changes in ultralcd_implementation_hitachi_HD44780.h in detail
...
Top -> down:
We don't need LiquidCrystalRus.cpp and LiquidCrystalRus.h any more. Functionality is now in utf_mapper.h
Comment on LCD_STR_BEDTEMP about behaviour in strings.
Change LCD_STR_ARROW_RIGHT from "\x7E" to ">" because "\x7E" is only ARROW_RIGHT on displays with DISPLAY_CHARSET_HD44780_JAPAN.
Introduce the counting UTF8 enabled lcd_print functions.
Replace the old lcd.print functions and make use of them.
A bit of reformatting around the changes.
2015-03-10 18:30:09 +01:00
alexborro
60ceca1bc1
Add speed configuration for home-bumping movement
2015-03-10 14:08:32 -03:00
AnHardt
6fc2ccd568
Make use of new remenbering fontswitch.
2015-03-10 18:04:03 +01:00
AnHardt
0f26f3abf2
Add a test_language.
...
Will show the compleet utf8 or ASCII charset
To se the second half of ASCII click on "01234..."
2015-03-10 17:59:28 +01:00
AnHardt
901cf203fe
Add legal stuff to marlin_kanji.h
2015-03-10 17:49:16 +01:00
AnHardt
2d5134b0ed
Introduce - clean - prepae language files
2015-03-10 17:46:25 +01:00
domonoky
d813090d90
Merge remote-tracking branch 'remotes/upstream/Development' into Development
...
Conflicts:
Marlin/Marlin_main.cpp
Marlin/stepper.cpp
2015-03-10 10:46:37 +01:00
Scott Lahteine
c321c97f35
Merge pull request #1584 from galexander1/stringcleanup
...
fix a handful of cases where strtod() was cast to int, instead of just using strtol()
2015-03-10 01:48:30 -07:00
maverikou
53abc5e2f1
Merge branch 'Development' into delta_auto_bed_level
2015-03-09 22:28:57 +02:00
Mehmet Sutas
956fb2d278
Merge pull request #1 from MarlinFirmware/Development
...
update
2015-03-09 11:05:49 +02:00
Scott Lahteine
978dadf806
Base64 decode AJAX-fetched text properly
2015-03-08 21:54:17 -07:00
Scott Lahteine
0eae9c24bc
Merge pull request #1582 from galexander1/deltaconftypo
...
fix typo in delta example config introduced in commit 697ee2d
2015-03-08 21:13:14 -07:00
Scott Lahteine
624f23f550
Merge pull request #1575 from Wurstnase/fix-controllerFan
...
Fix controller fan
2015-03-08 20:36:38 -07:00
maverikou
424c747fb3
Enable M401 and M402 for deltas with allen key z-probes.
2015-03-08 09:57:38 +02:00
maverikou
0d593ab7c1
Fix debug message
2015-03-08 09:41:31 +02:00
Greg Alexander
3e8c5678f5
fix bug where, i.e., "G1X1E1" would be interpretted as "G1 X10 E1",
...
because strtod() will read the E address value as if it was a base 10
exponent.
2015-03-07 21:14:34 -05:00
Greg Alexander
ed7874b4e0
M404 should not use 'N' address as parameter because 'N' is reserved for the line number
2015-03-07 17:35:06 -05:00
Greg Alexander
b9dfa5cad4
use code_value_long() instead of (int)code_value()
2015-03-07 17:33:15 -05:00
Greg Alexander
901b03d020
use strtol() instead of strtod() when an integer value is desired
2015-03-07 17:24:26 -05:00
Greg Alexander
4fba7b084f
fix typo in delta example config introduced in
...
commit 697ee2dc50
2015-03-07 16:43:41 -05:00
Mehmet Sutas
cfc6a3a87a
Filament Runout Sensor Feature
...
With this change a mechanical or optical switch may be used to check the
availability of the filament and when the filament runs out an M600
(filament change) command is issued. This is only done while printing
with an SD card.
This feature was requested several times (issue #679 ), but the requests
were not accepted since it was believed that this situation should be
handled at host side. However during an SD print the control is totally
on firmware and I think that during an SD print it should be handled by
the firmware.
The original code was posted at reprap forum
(http://forums.reprap.org/read.php?1,297350 ) by Lazymonk. I have only
corrected some bugs of the code and improved it by adding definitions to
the configuration.h in order to make it more standardized.
2015-03-07 22:43:15 +02:00
maverikou
e6862700af
Add Z_RAISE_AFTER_PROBING to all config files
2015-03-07 20:55:30 +02:00
maverikou
39d255608d
Test an extra delta configuration with auto bed leveling code paths
2015-03-07 20:53:23 +02:00
maverikou
7c24b97958
Ported over Johann Rocholl's improvements for delta printers:
...
- Nonlinear auto bed leveling code (includes G29, G30, Z_RAISE_AFTER_PROBING). Cleaned it up to be a delta-specific AUTO_BED_LEVELING_GRID code path.
- Allen key z-probe deployment and retraction code. Cleaned it up and added safety checks.
2015-03-07 20:36:21 +02:00
Wurstnase
a5342c942e
Update Marlin_main.cpp
2015-03-07 16:47:53 +01:00
Scott Lahteine
0f3b7d5575
Update annotated configurations
...
- Also update base configs
2015-03-07 01:07:40 -08:00
Scott Lahteine
c5aa56bc4d
Merge branch 'Development' into marlin_configurator
...
Latest upstream commits
2015-03-06 23:00:03 -08:00
Scott Lahteine
d085725c86
More sanity-checking for ABL
...
- Moved sanity-checks to Marlin_main.cpp
- Applied to other configuration files
- Fixed formatting of ABL output
- Passing verbose level to probe_pt
- Miscellaneous cleanup
- Put CONFIG_STEPPERS_TOSHIBA into Configuration.h
2015-03-06 22:14:34 -08:00
Scott Lahteine
8b6766b37b
Merge branch 'Development' into marlin_configurator
...
Latest upstream changes
2015-03-06 16:32:57 -08:00
Scott Lahteine
9eed8c8cf0
Make sure a ROM is selected for ULTRA_LCD
2015-03-06 15:37:54 -08:00
AnHardt
7136268273
Added 'dogm_font_data_6x10_marlin_Kanji.h'
...
This is copied from http://www.thingiverse.com/thing:664397
// Japanese Original font
// Version 0.1 by ichibey
//
// 営利目的で利用する際は、かならず許可を得てください。非営利の場合は、CCライセンスに従い使用ください。
// http://creativecommons.org/licenses/by-nc/2.1/jp/legalcode
This font is very special. It uses a mixture of katakana an kanji symbols, uses multi character symbols and is only addressable by '\xxx' sequences.
2015-03-07 00:26:28 +01:00
AnHardt
16e173e167
Added 5 new font.h files to main directory.
...
The former place of 'dogm_font_data_6x9_marlin.h' was in 'dogm_font_data_m0arlin.h'.
Deleted 'dogm_font_data_marlin.h'.
2015-03-07 00:09:49 +01:00
Scott Lahteine
254970c92a
Merge pull request #1570 from C-o-r-E/escape_fix
...
Fixes gCode handling of comments and escaped characters
2015-03-06 15:09:35 -08:00
Scott Lahteine
25dc79f124
Remove M48 credits also
2015-03-06 14:54:30 -08:00
Scott Lahteine
34e51f576f
Fix compile error in gcode_G29
...
- A redo of #1576 , which missed topo_flag
- Always set verbose_level
2015-03-06 14:52:05 -08:00
AnHardt
b14270b029
Added font tools
2015-03-06 23:48:55 +01:00
AnHardt
fe2bd237d5
Add font sources.
...
Fonts have been created with fony.exe (http://hukka.ncn.fi/?fony )
The HD44760_? fonts simulate the fonts of the character based displays.
The ISO10646 fonts provide the right size of the standard fonts.
Marlin_symbols contains only the the special symbols of the original marlin font.
2015-03-06 23:36:56 +01:00
Scott Lahteine
344a12bd10
Merge pull request #1571 from AnHardt/Undubble
...
Undubble MSG_MIN & MSG MAX
2015-03-06 10:08:19 -08:00
Scott Lahteine
1149c24b86
More grouping, cleanup, start on overrides
2015-03-06 08:48:53 -08:00
Wurstnase
62bd734612
fix controllerFan() for inverted enable pins
...
add ```^ !(n_ENABLE_ON)``` for each stepper
2015-03-06 12:01:17 +01:00
AnHardt
3024f6c706
Undubble MSG_MIN &MSG MAX
2015-03-06 00:25:44 +01:00
Gina Häußge
63b62d8d4e
Fixed in-line comments and escaping
...
* "G1 X1 ; test" was not executing "G1 X1" due to never leaving comment mode.
* "M117 Hello \;)" printed "Hello \" to the display due to not replacing serial_char properly.
Tested with the following commands:
* M117 Hello ; test => displays "Hello" on display, ignores "test"
* G1 X1 ; foo => moves 1mm in X, ignores "foo"
* ; test => completely ignored, not even acknowledged
* M117 Hello \;) => displays "Hello ;)" on display
* M117 Hello \\;) => displays "Hello \" on display, ignores ")"
2015-03-05 23:30:34 +01:00
C-o-r-E
99fb1bc3e8
Attempt to resolve #1568 and add basic escape character support
2015-03-05 15:22:37 -05:00
Scott Lahteine
fad14ae7eb
Merge branch 'Development' into marlin_configurator
...
Latest upstream changes
2015-03-05 05:32:31 -08:00
Scott Lahteine
cdc38aa783
Move gcode handlers into inline functions
2015-03-05 04:27:24 -08:00
Scott Lahteine
6d9e9a6bef
Merge branch 'Development' into enhanced_g29
...
Latest upstream changes
2015-03-05 02:49:18 -08:00
Scott Lahteine
4db2179f5c
Include 4th extruder support
2015-03-05 02:37:36 -08:00
OhmEye
f90a947e65
Fix autoretract
...
Autoretract was broken, looks like it was overlooked when the retracted flag was updated for multi extruders.
2015-03-04 20:28:08 -10:00
Scott Lahteine
2ef6b3d57a
Fix wrong defines, broken syntax
2015-03-04 22:24:44 -08:00
Scott Lahteine
08b722b635
Merge pull request #1555 from C-o-r-E/solenoids
...
Add support for solenoid articulated extruders
2015-03-04 21:36:29 -08:00
Scott Lahteine
32744d41a9
Do sanity checking on LRFB values
...
- Setting boundaries based on configured limits, contrasting with G28
(which forgets these limits?)
2015-03-04 21:32:11 -08:00
chrono
0a7d85c20e
Minor fixes
2015-03-04 12:35:32 +00:00
chrono
48e3a97a18
Removed extra encoder definitions from pins_FELIX2.h
2015-03-04 12:21:18 +00:00
Scott Lahteine
d052a3c6aa
Merge pull request #1551 from thinkyhead/redundant_encrot
...
Cleanup rotary encoder encrot* defines
2015-03-04 03:22:24 -08:00
chrono
d8eeddfb93
Updated DUAL Extruder config, added README and enabled NEWPANEL by default
2015-03-04 09:59:58 +00:00
chrono
b423b90c77
Added Configuration_adv.h to examples for LCD/SD Support
2015-03-03 19:09:25 +01:00
domonoky
075507fb9a
missed one X_ENABLE_PIN
2015-03-03 11:09:56 +01:00
Scott Lahteine
dfb38874f8
Some suggested changes for #1555
2015-03-03 00:48:20 -08:00
Scott Lahteine
7f8ea7105f
Arrange ProbeAction values bitwise
2015-03-02 20:14:37 -08:00
Scott Lahteine
7684721977
Enhanced G29
...
- Adapted “Enhanced G29” code referred to in #1499 and posted at
[3dprintboard.com](http://3dprintboard.com/showthread.php?3105-Auto_Bed_
Leveling-Enhanced-G29-command)
- Compatible with current G29 while adding some new arguments
- `V` sets the verbose level for serial out
- `T` (or `V` > 2) send a Topology report to serial out
- `E` works the same way as before
- `P` works as before (source used `n` or `U`/`u`)
- `L`, `R`, `B`, `F` work as before
- Still needs sanity checking for `LRBF`
2015-03-02 20:00:17 -08:00
C-o-r-E
874d3d3fc5
Add support for solenoid articulated extruders
2015-03-02 20:07:12 -05:00
chrono
7540a81106
Minor fixes
2015-03-02 22:55:00 +01:00
chrono
a375d648c7
Merge remote-tracking branch 'upstream/Development' into Development
2015-03-02 17:21:05 +00:00
domonoky
4a7aca2736
Merge remote-tracking branch 'remotes/upstream/Development' into Development
2015-03-02 17:52:12 +01:00
alexborro
715104e477
Fix Endstop check for CoreXY bots.
...
The X_Axis could not home to min while Y_Max endstop was trigged.
2015-03-02 13:36:58 -03:00
Scott Lahteine
e428e8da75
Merge pull request #1552 from thinkyhead/cleanup_cardreader
...
Cleanup of cardreader.*
2015-03-02 07:57:26 -08:00
Scott Lahteine
20e59dc61e
Don't skip files starting with underscores
2015-03-02 07:56:11 -08:00
Scott Lahteine
f171656f8e
Cleanup of cardreader.*
...
- Apply standards to cardreader.*
- Fix minor issues with cardreader.cpp
- Apply standards to some other stale regions
2015-03-02 07:06:01 -08:00
Scott Lahteine
f379edca78
Cleanup rotary encoder encrot* defines
...
The encrot values are used in only one place, and don’t vary, so remove
redundant references.
2015-03-02 06:42:48 -08:00
Scott Lahteine
c7cdb176c8
Merge branch 'Development' into marlin_configurator
...
Latest upstream changes
2015-03-02 06:13:10 -08:00
Scott Lahteine
49f471a5fc
Merge pull request #1541 from thinkyhead/fixup_temperature
...
Cleanup of temperature code
2015-03-02 05:38:10 -08:00
Scott Lahteine
f2710e11d1
Optimize initial loading, code cleanup
2015-03-02 05:23:36 -08:00
chrono
558c6313f7
Merge branch 'pr-felix' into Marlix
2015-03-02 10:27:58 +00:00
chrono
08bc723a3c
Enable PIDBED
2015-03-02 10:26:42 +00:00
chrono
e487bd642b
Updated PR to streamline integration
2015-03-02 09:49:45 +00:00
Scott Lahteine
2eeb241b42
Find fields that group together
...
- Do field grouping
- Tweak configurations for better grouping
2015-03-02 01:45:53 -08:00
Scott Lahteine
e30bfedce4
Fix undefined *_PROBE_BED_POSITION error
2015-03-01 19:57:35 -08:00
chrono
3eafea840d
Minor fixes in Configuration.h
2015-03-01 11:04:02 +01:00
chrono
c7fb1b70f2
Initial Configuration.h for Felix 2.0/3.0
2015-03-01 09:54:36 +00:00
chrono
2e172f38bd
Added support for Felix 2.0/3.0 printers
2015-03-01 09:16:55 +00:00
Scott Lahteine
f994729999
Parse and use dependent groups
...
- Parse #if, #ifdef, etc. for rules to enable fields
2015-02-28 22:40:20 -08:00
maverikou
9b50ec6512
Panel One encoder pins
2015-02-28 10:52:15 +02:00
Scott Lahteine
838a22de64
Fix switch value method, make app global
2015-02-27 21:08:09 -08:00
Scott Lahteine
8d5839151b
Merge branch 'Development' into marlin_configurator
...
Latest upstream changes
2015-02-27 20:40:23 -08:00
domonoky
443e7edef4
- Add support for L6470 Drivers.
...
- Both TMC, L6470 and pin-driven drivers work.
- All can be mixed and matched as needed.
2015-02-27 12:43:23 +01:00
Scott Lahteine
1db02c2891
Merge branch 'Development' into fixup_temperature
...
Merge upstream changes
2015-02-26 17:25:28 -08:00
Scott Lahteine
a99470fbb0
Merge pull request #1527 from maverikou/panel_one
...
Added support for PanelOne from T3P3.
2015-02-26 16:01:13 -08:00
domonoky
5727cb3ed4
Cleanup TMC Stepper a bit.
2015-02-26 12:57:46 +01:00
Scott Lahteine
a5bbd402bf
Merge pull request #1539 from AnHardt/dummysensor
...
Extend the idea of dummy temperature sensors.
2015-02-26 01:29:14 -08:00
Scott Lahteine
1a7b0d9a37
Redo HAS_* macros to fix define error
2015-02-26 01:14:59 -08:00
Scott Lahteine
864dddc878
Macros to the top, a few HAS_* macros
2015-02-26 00:33:30 -08:00
alexborro
227ab8c665
Merge pull request #1503 from MarcelMo/patch-2
...
Support for simple customisable AutoZProbing area
2015-02-25 13:22:42 -03:00
Scott Lahteine
fd1ea9d56f
Move literal strings to language files
2015-02-24 23:03:08 -08:00
maverikou
8742b6bd56
Merge branch 'Development' into panel_one
2015-02-24 22:24:57 +02:00
Scott Lahteine
aa9c1f1bed
Better name for ADC macro
2015-02-24 05:38:10 -08:00
Scott Lahteine
9c9726d469
Cleanup of temperature code
...
- Reduce calls to millis()
- General cleanup of manage_heaters
- General cleanup of pid autotune
- Formatting here & there
- Macros to clean up and shrink ISR code (reduced by ~364 lines)
2015-02-24 04:46:11 -08:00
AnHardt
c6d2ebe452
Extend the idea of dummy temperature sensors.
...
Added a second sensor and made them configurable.
2015-02-24 11:02:16 +01:00
Scott Lahteine
c9a3eb0c1a
Spacing in calculate_volumetric_multiplier(s)
2015-02-23 20:35:18 -08:00
Scott Lahteine
2af559cca3
Shared function for menu_edit_* and menu_edit_callback_*
2015-02-23 20:31:28 -08:00
Scott Lahteine
df8c51528f
Merge branch 'Development' into cleanup_ultralcd
...
Latest upstream changes
2015-02-23 20:13:08 -08:00
Scott Lahteine
517f411999
Spacing adjustment to menu_edit* macro
2015-02-23 20:11:52 -08:00
Scott Lahteine
4938ae5caf
Add required backslash for macro expansion
2015-02-23 20:10:49 -08:00
Scott Lahteine
e182cdebf9
Add required backslash for macro expansion
2015-02-23 19:54:07 -08:00
Scott Lahteine
fa4c36df68
Fix menu callback issue wrt LCD_CLICKED
2015-02-23 19:40:57 -08:00
Scott Lahteine
0cf0c20532
Optimize calculate_volumetric_multiplier
2015-02-23 18:10:35 -08:00
domonoky
38500165ea
First attempt at adding TMC Driver support. May need some cleanup.
2015-02-23 17:45:29 +01:00
domonoky
b55995aae8
Introduce a layer of macro indirection to all stepper pins. This allows other stepper drivers to redefine them, so they can use SPI/I2C instead of direct pin manipulation.
2015-02-23 16:12:35 +01:00
kieranc
8ccdac9898
Enable PID debugging for heated bed
2015-02-23 09:42:01 +01:00
kieranc
29097b0ab2
Enable PID debugging for heated bed
2015-02-23 09:41:25 +01:00
kieranc
21bd4fd6db
Enable PID debugging for heated bed
2015-02-23 09:40:53 +01:00
kieranc
fb56aad898
Enable PID debugging for heated bed
2015-02-23 09:40:29 +01:00
kieranc
08c543f8fb
Enable PID debugging for heated bed
2015-02-23 09:40:06 +01:00
kieranc
c89413db1e
Enable PID debugging for heated bed
2015-02-23 09:39:39 +01:00
kieranc
1c71e4751a
Enable PID debugging for heated bed
2015-02-23 09:39:07 +01:00
maverikou
a9e15aa503
Updated example configurations
2015-02-22 20:15:05 +02:00
Scott Lahteine
3ba47ea277
Remove test/demo multi=line code menu items
2015-02-22 10:10:37 -08:00
Scott Lahteine
c1240f23dd
Merge branch 'Development' into marlin_configurator
...
Latest upstream changes
2015-02-22 10:02:25 -08:00
alexborro
a57869ba49
Dummy Thermistor Table for testing purposes
...
Am I the only one who always need to change the thermistortable.h to add
a dummy table??
Ok, it is done. Just set the thermistor to 999 and it will always read
25C. Great for Testing or Development purposes.
2015-02-22 11:02:04 -03:00
Maverikou
2e166f5337
Added support for PanelOne from T3P3.
2015-02-22 09:14:43 +02:00
Scott Lahteine
40ef472a25
Merge in encoder multiplier
2015-02-21 20:18:49 -08:00
Scott Lahteine
1c13cd604b
Formatting in babysteps defines
2015-02-21 18:45:10 -08:00
Scott Lahteine
3a26804d80
Adapt to latest PID code and fix typos
2015-02-21 18:41:04 -08:00
Scott Lahteine
422582da71
Prep formatting for upcoming PR
2015-02-21 18:24:16 -08:00
Scott Lahteine
27ac3e985d
Add options to example_configurations
2015-02-21 18:17:37 -08:00
Scott Lahteine
0d6a7a2df0
Merge with latest upstream changes
2015-02-21 18:13:31 -08:00
Scott Lahteine
c7a97e18b7
Merge branch 'Development' into cleanup_ultralcd
...
Latest upstream changes
2015-02-21 18:04:08 -08:00
Scott Lahteine
6d5c13df74
Merge pull request #1520 from thinkyhead/fixup_temperature
...
Fix typos in checkExtruderAutoFans
2015-02-21 17:53:26 -08:00
Scott Lahteine
5b9e341222
Merge pull request #1516 from thinkyhead/fixup_ramps
...
Cleanup ramps boards
2015-02-21 17:51:57 -08:00
Scott Lahteine
57bc28b42c
Cleanup and fix ultralcd.cpp
...
- Fix bug in lcd_control_temperature_menu
- Remove test menu-item left in from multi-line command feature
- Replace literals with translatable strings
- Reduce lcd_preheat code redundancy
- Reduce menu macro redundancy
- Clean up formatting
2015-02-21 17:38:56 -08:00
Scott Lahteine
4fcd4b444e
Merge pull request #1519 from thinkyhead/fix_recent_issues
...
Fix implementation of PID menu items
2015-02-21 16:43:11 -08:00
Scott Lahteine
9c35ed149d
Merge pull request #1508 from AnHardt/iss1492
...
Fix iss#1492
2015-02-21 16:26:37 -08:00
Scott Lahteine
430c4b6538
Replace missing backslash
2015-02-20 02:17:16 -08:00
Scott Lahteine
3aa5f98b64
Download all as ZIP, adjust layout on resize
2015-02-20 02:12:00 -08:00
Scott Lahteine
a8939eec28
Readability of MENU_MULTIPLIER_ITEM
...
Last commit before bed.
2015-02-20 02:08:41 -08:00
Scott Lahteine
09e09b308e
Tweaky spacing adjustments
2015-02-20 01:22:56 -08:00
Scott Lahteine
e3fd3e8fa4
Fix typos in checkExtruderAutoFans
2015-02-20 00:08:59 -08:00
Scott Lahteine
c610471b0c
Add PID_PARAMS_PER_EXTRUDER conditional
2015-02-20 00:00:19 -08:00
Scott Lahteine
2d6fa9ce80
Proper implementation of PID menu items
...
- Make this work per #1344
2015-02-19 23:54:06 -08:00
wgm4321
b8e79dce89
Fix compilation errors when encoder multiplier is disabled
2015-02-19 21:51:23 -05:00
wgm4321
65e1fc71be
Add encoder rate multiplier
2015-02-19 21:42:57 -05:00
Scott Lahteine
859c8d3fef
Azteeg X3 overrides too
2015-02-19 17:28:38 -08:00
Scott Lahteine
7891eacf21
Merge branch 'Development' into fixup_ramps_boards
...
- Also apply cleanup for #1514
2015-02-19 17:26:22 -08:00
Scott Lahteine
1600506545
Merge remote-tracking branch 'upstream/Development' into marlin_configurator
2015-02-19 15:15:55 -08:00
Scott Lahteine
5d0c93ae10
Keep config boxes in view on wide screen
2015-02-19 03:41:41 -08:00
Scott Lahteine
335b7680c9
Tooltip code, widescreen layout, hide auto-expands
...
Slightly better layout for wide screens.
2015-02-19 03:11:16 -08:00
domonoky
15b73386b5
Add pin definitions for the Boards BAM&DICE + BAM&DICE Due
2015-02-19 11:53:31 +01:00
Scott Lahteine
08c236059e
Merge pull request #1505 from thinkyhead/issue_1499
...
Bed leveling probe behavior issue?
2015-02-19 01:24:17 -08:00
Scott Lahteine
f238c7428d
Merge branch 'Development' into marlin_configurator
...
Latest upstream changes
2015-02-18 21:56:17 -08:00
Scott Lahteine
da275c72ab
Cleanup Github reply.data.content before atob()
2015-02-18 21:45:38 -08:00
MagoKimbra
159196d1e9
Reset Alert message when finish M600 command
2015-02-18 21:33:38 +01:00
daid
266ff227cf
Merge pull request #1510 from docdawning/Development
...
Trivial spelling correction
2015-02-17 20:59:32 +01:00
DocDawning
dfd4e74a5c
Trivial spelling correction
2015-02-17 12:37:05 -07:00
AnHardt
6cdcd6c6d1
Fix iss#1492
...
Introduced lcd_strlen() and lcd_strlen_P().
Replaced the old functions where necessary.
Reworked language_ru.h.
Speeded up test for zero length string in cardreader.cpp
2015-02-16 13:53:58 +01:00
Scott Lahteine
c033904693
Updated config file section markers
2015-02-15 23:25:57 -08:00
Scott Lahteine
84a87a5b1c
Fix up configs a little
2015-02-15 23:19:22 -08:00
Scott Lahteine
63a5ff7ab9
Merge pull request #1489 from tommil/Development
...
Updated Finnish language file
2015-02-15 23:02:11 -08:00
Scott Lahteine
efb0491d40
Merge branch 'Development' into issue_1499
...
Merging latest upstream changes
2015-02-15 22:59:07 -08:00
Scott Lahteine
8309b4f408
Merge branch 'Development' into marlin_configurator
...
Merging latest upstream changes
2015-02-15 22:58:04 -08:00
Scott Lahteine
961998cf91
Merge pull request #1496 from thinkyhead/issue_1493
...
Megatronics 3 servo pins
2015-02-15 22:00:14 -08:00
Scott Lahteine
b71322e793
Issue #1504 – K8200 Z_ENABLE_PIN
...
- K8200 uses a non-standard RAMPS with Z_ENABLE=63 ??
- Assuming from previous input that 3DRAG is the same.
2015-02-15 21:56:23 -08:00
Scott Lahteine
978d114c73
Bed leveling probe behavior issue?
...
The `float` keyword should not be on these vars because they conceal
the outer vars, preventing them from obtaining known values before
being passed in `set_bed_level_equation_3pts`. Possibly related to
`Z_RAISE_BETWEEN_PROBING` not functioning.
2015-02-15 20:51:27 -08:00
Scott Lahteine
7c6236761a
Merge branch 'Development' into issue_1493
...
Merging latest upstream changes
2015-02-15 20:45:35 -08:00
Scott Lahteine
9875352dd8
Merge branch 'Development' into marlin_configurator
...
Merging latest upstream changes
2015-02-15 20:44:21 -08:00
MarcelMo
d28f5b9e82
Support for simple customisable AutoZProbing area
...
When probing PCB´s I had the problem that i needed auto-leveling for specific areas (it´s never the same size).
Not much code, but very useful.
Now I use simply G29 L5 R55 F5 B35 P3 to probe a 4x6cm PCB before milling.
I used int for values... might be wrong...
I hope this time I got the right development tree. (tried first with https://github.com/MarlinFirmware/Marlin/pull/1130/commits )
2015-02-15 15:58:29 +01:00
Tommi Lamberg
513ff94b89
Merge remote-tracking branch 'upstream/Development' into Development
2015-02-15 12:21:45 +02:00
Scott Lahteine
83cb702e72
Config sections, multi-field values, toggles, etc
...
- Auto-detect “switchable” items where possible
- Handle switchable multi-value fields
- Add standard sections to config form
- Add section markers to configurations
- Add value options to configurations
- Remove and re-add fields for loaded configs
- Preserve sections across configs
- Preserve non-added fields
- Style added fields wider & newline by default
2015-02-14 23:44:01 -08:00
alexborro
afc737ca0c
Fix CoreXY Homing Routine.
...
Fixed how stepper ISR figure it out when the head (extruder) is going to
Min or Max direction.
Added Homing to Max Endstops.
2015-02-13 14:38:05 -02:00
Scott Lahteine
ec53c6309a
More fields, options in config, fix tooltips
2015-02-13 03:02:56 -08:00
Scott Lahteine
68184af57b
Merge branch 'Development' into marlin_configurator
...
Latest upstream commits
2015-02-12 21:59:26 -08:00
Scott Lahteine
7866fa161f
Merge pull request #1476 from Natealus/Development
...
Compiling errors with 4 Extruders defined and Viki 2 Implementation
2015-02-12 16:56:55 -08:00
Natealus
ea9e49b20d
ARRAY_BY_EXTRUDERS 4th hotend PID parameters
2015-02-12 00:56:47 -07:00
Scott Lahteine
d0ad8a978c
Megatronics 3 servo pins
...
- Naive implementation, assuming the data sheet pin numbers correspond
to Arduino pin numbers.
2015-02-11 23:46:27 -08:00
Scott Lahteine
e74138b2be
More robust fetch code, download buttons
...
- Fetch code now handles github, local, or http: access
- Download button creates a time-stamped inline download
- More complete error messages
- Show warnings when approaching the hourly fetch quota (limit
reloading!)
- Added my test domain (where the _htaccess is deployed)
- `_htaccess` file added to set Access-Control-Allow-Origin “*”
- Marlin logo with css
- Limit selectable areas to avoid annoying selections
- Messages now persist until dismissed
- Default repo for files set to thinkyhead, ‘marlin_configurator’ branch
- Cosmetic changes
2015-02-11 04:59:07 -08:00
Tommi Lamberg
622a531d9c
Fixed error in translation
2015-02-11 08:50:48 +02:00
Tommi Lamberg
290ab42d22
Updated Finnish translations
2015-02-11 08:37:07 +02:00
Jérémie FRANCOIS
22a7985445
reverted to upstream
2015-02-11 07:12:55 +01:00
Jérémie FRANCOIS
b3bda57ca2
reverted to upstream
2015-02-11 07:12:02 +01:00
Jérémie FRANCOIS
9d75a56b56
Merge remote-tracking branch 'upstream/Development' into Development
...
Conflicts:
Marlin/Configuration.h
Marlin/Marlin_main.cpp
2015-02-11 06:38:36 +01:00
Tommi Lamberg
0a59fee763
Merge remote-tracking branch 'upstream/Development' into Development
2015-02-11 06:53:43 +02:00
Scott Lahteine
eb5889b3da
Merge pull request #1479 from AnHardt/en_first
...
#include "language_en.h" before the national language in language.h
2015-02-10 15:33:45 -08:00
kieranc
b9ed873827
Enable PID debugging for heated bed
2015-02-10 14:13:06 +01:00
kieranc
0a19109476
Enable PID debugging for heated bed
2015-02-10 14:11:44 +01:00
Tommi Lamberg
a4f939cc27
Updated Finnish language file
2015-02-10 10:48:33 +02:00
Scott Lahteine
32d4dd073f
Merge pull request #1487 from AnHardt/iss1485
...
Fix for #1485
2015-02-09 21:41:07 -08:00
AnHardt
c246026bda
Sorry.
2015-02-10 00:23:39 +01:00
AnHardt
07e488cfae
Fix for #1485
2015-02-10 00:13:46 +01:00
Souko
e7ecf14d0c
Update ultralcd_st7920_u8glib_rrd.h
...
Fixed delay-times during Init. REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER won't get initialized on some Boards because delay was to short.
2015-02-09 21:46:06 +01:00
Scott Lahteine
52c3cf6d34
Fix a logging error
2015-02-09 05:07:05 -08:00
Scott Lahteine
ba24a09f24
Use api.github to get Configurations
...
- Make api.github the default source for configurations
- Remove configurations from the configurator
- Continuation and enhancements
2015-02-09 04:34:57 -08:00
Natealus
f4b0a40abb
Additional fixes to temperature.cpp and found another missing line
...
Looks like INVERT_E3_DIR was missing in the configuration.h also as I
did a test compile with 4 extruders and Azteeg X3 Pro defined. So I also
added those lines too. Additional formatting to make the comments line
up better in that section.
2015-02-08 15:43:58 -07:00
AnHardt
3aac2df057
Now the oter way around.
...
Include of language_en.h now behind national language.
All "#define MSG_STR_*" now surrounded by #ifndef and #endif.
2015-02-08 20:41:20 +01:00
AnHardt
488633bf44
#include "language_en.h" before the national language in language.h
...
+ May decrease the workload for feature developers. They may omit to
update all the language files but "language_en.h". When loading _en
first, all new features give some display, but the new in English.
- May throw some additional warnings about redefinition during compile.
2015-02-08 14:26:24 +01:00
AnHardt
8e92729141
Make display language configurable in Configuration.h
2015-02-08 13:45:22 +01:00
Natealus
38a500d05c
Viki 2 Implementation
...
I've insert the define and pointer entries for the Viki 2 and miniViki
from Panucatt in all of the example configs and main config. With these
additions and with pins done in the old single pin.h style...I was able
to get the display working fine save for needing to turn Delta Segments
per Second down. But that's a common graphics lcd issue being looked
into right now.
I need assistance in understanding how the new divided pins files fit
together because my previous attempts at trying to get it to work
appropriately didn't seem successful. This originally came from trying
to find out how to swap the XYZ Min and Max Endstop pins in the Azteeg
X3 Pro. It only comes with one set of connectors and they're Min
Endstops. My previous experience didn't turn out well trying to tell the
firmware to home to the Min Endstops so the best solution I found was to
swap the pins in the firmware. If I'm missing a conflict with a setup
other than delta please let me know, but it makes sense in my setup.
2015-02-08 03:14:59 -07:00
Natealus
697ee2dc50
Compiling errors with 4 Extruders defined
...
Here were a few changes that I had to make/add lines for the 4th hotend.
A compiling problem in the Temperature.cpp and missing lines in
configuration.h and configuration_adv.h. I added these lines in all of
the example configs too.
2015-02-08 01:05:05 -07:00
Jérémie FRANCOIS
85e5aa4011
Generalized enqueue_commands_P, and moved them to Marlin_main as they should
2015-02-07 23:24:20 +01:00
Scott Lahteine
4228758f1d
Clean up and improve tooltips, show the name
2015-02-07 11:58:19 -08:00
Scott Lahteine
0116320d2c
Strip slashes off the front of tooltips
2015-02-07 11:04:10 -08:00
Scott Lahteine
69240d41b0
Offset the timing of the pulsing animation
2015-02-07 10:45:56 -08:00
Scott Lahteine
78b9428f4e
Avoid capturing disabled items in comments
2015-02-07 10:34:16 -08:00
Scott Lahteine
5d159851e5
Fix positioning of tooltip
2015-02-07 09:03:00 -08:00
Scott Lahteine
c99f1de9f3
Fix tooltips blocking clicks
2015-02-07 07:39:10 -08:00
Scott Lahteine
1a548c1bc1
Find nearby comments and make them into tooltips
2015-02-07 06:20:04 -08:00
Scott Lahteine
90fa1345b0
Fix purge + refresh of define info
2015-02-07 03:02:26 -08:00
Scott Lahteine
aa67b38a44
Fan speed and 4th extruder on graphical LCD
...
- Display fan speed 0-1 as “—“ and 254-255 as “100%”.
- Display 4th extruder instead of the heated bed
2015-02-07 02:44:35 -08:00
Scott Lahteine
7850ae2f4f
Merge branch 'Development' into marlin_configurator
...
Merge latest Development
2015-02-07 02:20:25 -08:00
Scott Lahteine
2647402095
Use info.repl in updateDefineFromField, fix regex
2015-02-07 02:04:44 -08:00
Scott Lahteine
12a3975341
Close section tag, add String.prototype.lineCount
2015-02-07 00:46:14 -08:00
Scott Lahteine
4bb72f9480
Highlight the edited line
...
- Add a span to the edited text line to provide a highlight
- Scroll and highlight for switch checkboxes also
- Clean up initialization
- More API documentation
- Smarter handling of asynchronous file loading during init
2015-02-06 23:46:16 -08:00
Scott Lahteine
37c43a7ab3
Scroll to reveal on switches as well
2015-02-06 18:09:14 -08:00
Scott Lahteine
9c0adae3cd
Scroll to setting position in file when edited
...
- Animate scrolling to the edited item’s position
- Sanity check file drops and show warnings
- Fix form init / refresh on new configuration drop
- Document the API methods that get/set defines
2015-02-06 17:57:31 -08:00
Scott Lahteine
4d341bb758
Copy configs into subfolder
...
Browsers may not want to load files outside the folder, but they may be
okay with these relative references within the folder.
2015-02-06 14:58:47 -08:00
Scott Lahteine
72856166a9
Fix bad typo in ConfigurationStore.cpp
2015-02-06 14:43:58 -08:00
Scott Lahteine
b51204cc1c
Add fieldsets and make them into tabs
2015-02-05 20:28:39 -08:00
Scott Lahteine
56769ba4f8
Make comment/uncomment a little neater
2015-02-05 19:39:42 -08:00
Scott Lahteine
94bebf31ac
Pre-collect info about options on field init
...
- When initializing fields use the configuration to determine the format
- Cache the line for each option for fastest string compare / replace
- Add logging levels for debugging
2015-02-05 19:30:11 -08:00
Scott Lahteine
32aaadc301
Include minimized jQuery 2.1.3
2015-02-05 11:50:42 -08:00
Scott Lahteine
53f6bbdfe0
Try a stepper for the serial port
2015-02-05 11:44:43 -08:00
Scott Lahteine
ac7a4358d6
Add a responsive file uploader
...
- Specify HTML5
- Allow drag and drop for loading configurations
2015-02-05 11:14:31 -08:00
Scott Lahteine
09a385d9b0
Add "use strict" to the top.
2015-02-05 08:22:51 -08:00
Scott Lahteine
b2627200ea
Get thermistors from config, add temp sensors
2015-02-05 08:19:09 -08:00
Scott Lahteine
ef18bfdd3f
An in-place browser-based configurator utility
...
- A web form with fields for configuration values
- Reads and parses standard config files
- Modifies configurations dynamically in-place
2015-02-05 07:05:29 -08:00
Scott Lahteine
3490a19103
Merge pull request #1466 from CONSULitAS/Development_K8200_de
...
K8200: Example Configuration.h fixed
2015-02-04 17:28:04 -08:00
CONSULitAS
cfbb94a2a8
K8200: Example Configuration.h fixed
...
Example Configuration.h: fixed strange white characters preventing
compilation in lines 1 and 3 - oops
2015-02-04 10:35:10 +01:00
Scott Lahteine
b65c5d8ec6
Merge pull request #1464 from AnHardt/iss1448-Menu
...
Unified menu selection - by hilighting - made first column avilable
2015-02-03 22:43:29 -08:00
CONSULitAS
0de5083aff
K8200: Example Configurations readme.md updated
...
Example Configurations for K8200 readme.md updated
* readme.md: added description for german umlaut support on LCD
2015-02-04 00:24:51 +01:00
CONSULitAS
c421ffd520
K8200: Example Configuration_adv.h back in sync
...
Example Configuration_adv.h for K8200 back in sync
* Configuration_adv.h: rebased and added missing changes for 4th
extruder
2015-02-04 00:19:18 +01:00
CONSULitAS
0575dd10de
K8200: Example Configuration.h back in sync
...
Example Configuration.h for K8200 back in sync
* Configuration.h: rebased and added missing changes
* Configuration.h: updated comments for K8200
2015-02-04 00:15:50 +01:00
AnHardt
f708884808
Introduced new function lcd_implementation_mark_as_selected()
...
New function now drops the prechar (select character) and makes the first
column usable for text.
Marking the line is now constantly made by highlighting (reverse).
Replaced selection code in:
lcd_implementation_drawmenu_generic()
_drawmenu_setting_edit_generic()
_drawmenu_sd()
with new function.
2015-02-03 23:35:33 +01:00
Scott Lahteine
b6ca50a2cc
Merge pull request #1463 from thinkyhead/cleanup_recent_merge
...
Apply some cleanup for recent merge
2015-02-03 12:06:47 -08:00
Scott Lahteine
cc56f36870
Merge pull request #1461 from thinkyhead/issue_1453_redo
...
Apply fix for M600 filament change
2015-02-03 11:52:09 -08:00
Scott Lahteine
8663f4bbaf
Apply some cleanup for recent merge
...
Combine 1/(rows+1) with u8g.getHeight() to get rowHeight and just use
that.
2015-02-03 11:48:49 -08:00
Scott Lahteine
0cb1029311
remove extra plan_buffer_line
2015-02-03 11:26:36 -08:00
AnHardt
9381bfe7f9
Fixes issue #1447 - Overlapping of long descriptions with values.
2015-02-03 20:15:16 +01:00
Scott Lahteine
b97a950f53
Apply fix for M600 filament change
...
- Patch from #1453 for delta movement plan
- Fix: Set X with code X instead of adding to X
2015-02-03 09:57:16 -08:00
AnHardt
2abf1ad940
Distribute recent changes in Configuration.h to the examples.
2015-02-03 17:59:04 +01:00
AnHardt
33f8580255
Merge branch 'lcd-width' into b-
2015-02-03 14:45:58 +01:00
AnHardt
0c24bb6cfc
Adjust LCD_WIDTH to make better use of DOGM LCDs
2015-02-03 14:21:43 +01:00
AnHardt
b1dbd765c6
Centralise definition of fonts for DOGM displays
...
Prework for issue #1448 and #1447
Will merge in when pull request #1457 is in.
2015-02-03 13:10:09 +01:00
AnHardt
65642592ee
Added dualline version.
2015-02-03 12:25:36 +01:00
AnHardt
f9cc1df00b
Droped URL from bootsplash.
2015-02-03 11:14:27 +01:00
AnHardt
c20606b8d7
Replaced some literal constants with defines
...
Replaced calculation to centre bitmap with fixed values.
Saved 20 bytes.
2015-02-03 09:52:29 +01:00
AnHardt
3602474c25
Replace solitaire use of u8g_font_5x8 font and replace with u8g_font_6x10_marlin
...
and win another 1694 bytes.
2015-02-03 09:07:57 +01:00
AnHardt
f5fd94d62a
Kick suspicious loop an win 72 bytes.
...
No visible impact.
2015-02-03 08:56:00 +01:00
Scott Lahteine
b3973ed224
Fix HD44780 misspelled as HD44870
2015-02-02 22:33:58 -08:00
Scott Lahteine
d8b7f29fa2
Merge pull request #1452 from thinkyhead/fix_M200_bug
...
M200 cleanup, normalization of EXTRUDER loops
2015-02-02 21:58:15 -08:00
Scott Lahteine
6d81968db5
Merge pull request #1450 from docdawning/Development
...
Normalized section headers, added some headers, added help URLs for newb...
2015-02-02 21:17:06 -08:00
DocDawning
5bb3933b21
Fixed n00bsauce
2015-02-02 14:18:53 -07:00
DocDawning
d109cd940b
Normalized all configuration files to include my new section headers and the like.
2015-02-02 14:11:21 -07:00
DocDawning
055c4beaf9
Normalized section headers, added some headers, added help URLs for newbies
2015-02-02 14:11:09 -07:00
Scott Lahteine
9dc5de6166
Hide code that makes veteran geeks go "aha!"
2015-02-02 05:55:55 -08:00
Scott Lahteine
bd387068bb
Apply loops for extruders elsewhere also
2015-02-02 05:27:27 -08:00
Scott Lahteine
4a146d584b
Loop, since the pending feature can use an array
2015-02-02 05:16:17 -08:00
Scott Lahteine
bca884bf72
Realized it's not a bug, but cleanup code anyway
2015-02-02 04:41:31 -08:00
AnHardt
2dd43a82b1
Ups. #else added
2015-02-01 14:16:35 +01:00
AnHardt
26e55471f8
Update example configurations.
2015-02-01 13:46:32 +01:00
AnHardt
85385be132
Removed now automatic define of DISPLAY_CHARSET_DOGM + improved description.
2015-02-01 13:33:25 +01:00
AnHardt
0e40408ee5
Make exemplaric use of new display charsets in language_en.h and languag_de.h
2015-02-01 13:20:58 +01:00
AnHardt
8dce5a6644
Improve new charset featur.
...
Select DOGM-displays automaticly.
Give hint where to find charsets.
Add '²' and '³' characters.
2015-02-01 13:09:59 +01:00
Scott Lahteine
c009c81e65
make marlin-main the default
2015-01-31 23:11:28 -08:00
Scott Lahteine
f4ebc02555
marlin url
2015-01-31 23:09:12 -08:00
Scott Lahteine
0af9a0bf57
url to firmware downloads
2015-01-31 22:19:45 -08:00
Scott Lahteine
5f8dd92905
toss in a fix for .ru
2015-01-31 21:58:38 -08:00
Scott Lahteine
3f3ad9b3ad
typo
2015-01-31 21:42:53 -08:00
Scott Lahteine
07639053fb
Add support for BQ Prusa i3 "Hephestos"
2015-01-31 21:38:30 -08:00
Philip Schell
fb7c636ecf
Avoid compiling error
...
Only a missing ","... now it will compile again
2015-02-01 01:33:04 +01:00
alexborro
787d6fb61a
Update RUMBA pins file
...
Add FAN1_PIN and SERVO0_PIN
2015-01-31 18:03:28 -02:00
Scott Lahteine
5fd5105d44
Merge pull request #1439 from clefranc/Development
...
Fix nozzle in temperature menu
2015-01-30 19:05:45 -08:00
AnHardt
76bf93efcb
Revert "get STR_THERMOMETER from ultralcd_implementation_hitachi_HD44780.h"
...
This reverts commit 4d5b0e2037
2015-01-30 22:42:44 +01:00
AnHardt
4d5b0e2037
get STR_THERMOMETER from ultralcd_implementation_hitachi_HD44780.h
2015-01-30 22:20:10 +01:00
Christian Lefrançois
33408a4dfc
Update ultralcd.cpp
...
Fix number of nozzle displayed in temperature menu.
2015-01-30 11:16:13 -05:00
AnHardt
6e6e3cf443
merged https://github.com/MarlinFirmware/Marlin.git
2015-01-30 11:05:29 +01:00
AnHardt
b3ca430a20
Inducted the defined placeholders in the translation table.
2015-01-30 10:35:14 +01:00
AnHardt
e045034c3f
Included Configuration.h to read the defined charsets.
...
Defined the charsets plus a default.
2015-01-30 10:31:58 +01:00
AnHardt
27c638803e
Defined three charsets.
2015-01-30 10:28:22 +01:00
Scott Lahteine
073c59c50a
Clean up some formatting
...
- Also partial cleanup of Marlin_main.cpp with a smidgen of Doxygen.
2015-01-29 18:52:21 -08:00
AnHardt
9a4d4b3a2f
translated Deltamenu
2015-01-29 13:19:32 +01:00
AnHardt
8aa6487b4b
MSG_ENDSTOP_ABORT = 'Endstop abort' > 'Endstop Abbr. Ein'
2015-01-29 13:12:55 +01:00
AnHardt
666ad7106b
Translated redundand: define MSG_INIT_SDCARD and MSG_CNG_SDCARD
2015-01-29 13:09:12 +01:00
AnHardt
e5c45fbe8c
Infoscreen messages end with a '.' if not to long.
...
MSG_NO_MOVE = 'Kein Zug.' > 'Motoren Eingesch.' hat mich grau Haare gekostet.
Die englisch Meldung will sagen - Du kannst jetz am Extruder arbeiten, die
Achsen sind bockiert, die Motoren sperren die Achsen weil sie unter Strom
stehen, weil sie eingeschaltet sind.
2015-01-29 13:02:21 +01:00
AnHardt
1e22137e27
MSG_STOP_PRINT = 'Druck stoppen' > 'SD-Druck Abbruch'
...
to work out that this can't be resumed.
2015-01-29 12:41:46 +01:00
AnHardt
05d2ebd118
MSG_WATCH > 'Beobachten' > 'Info'
2015-01-29 12:29:31 +01:00
AnHardt
06cba91c39
eye candy 2
2015-01-29 12:26:21 +01:00
AnHardt
9352c9547f
MSG_SPEED = 'Geschw' > 'Geschw.'
2015-01-29 12:13:44 +01:00
AnHardt
0dfb0162f3
eye candy.
2015-01-29 12:07:01 +01:00
AnHardt
7222b27501
MSG_MOVE_AXIS = 'Achsen bewegen' > 'Bewegen'. Is Extruder an axis?
2015-01-29 12:02:58 +01:00
AnHardt
a6f808c9b1
remove unused #define MSG_RETRACT
2015-01-29 11:58:50 +01:00
AnHardt
152fa579f5
MSG_SWITCH_PS_OFF = 'Switch Power Off' -> 'Netzteil Aus'
2015-01-29 11:55:36 +01:00
AnHardt
7a32b742f3
MSG_SWITCH_PS_ON = 'Switch Power On' ->'Netzteil Ein'
2015-01-29 11:50:51 +01:00
AnHardt
4e176d2ce8
MSG_SET_ORIGIN = 'Setze Nullpunkt' ->'Setze Null hier'
2015-01-29 11:45:18 +01:00
AnHardt
1f8c8ad3ed
MSG_SET_HOME_OFFSETS = 'Set home offsets' ->'Setze Home hier'
2015-01-29 11:39:35 +01:00
AnHardt
0e8836ce5e
MSG_AUTO_HOME = 'Auto Nullpunkt' ->'Home'
2015-01-29 11:36:07 +01:00
AnHardt
56d3e6615d
MSG_DISABLE_STEPPERS = 'Stepper abschalt.' -> 'Motoren Aus'#
2015-01-29 11:19:10 +01:00
Scott Lahteine
1258980832
Merge pull request #1429 from bq/Development
...
Add bq Witbox 3D printer
2015-01-29 01:14:18 -08:00
Victor Andueza
766762a4dc
Change url link
2015-01-29 09:28:50 +01:00
Scott Lahteine
7df9ca051c
Merge pull request #1428 from thinkyhead/issue_1388_eeprom
...
Make EEPROM storage consistent
2015-01-28 22:58:04 -08:00
Scott Lahteine
fe3810f073
yeah, what he said
2015-01-28 22:27:15 -08:00
Scott Lahteine
6137bbd484
use eeprom read correctly
2015-01-28 22:10:31 -08:00
Scott Lahteine
9bc9051405
Flag EEPROM write errors on serial output
...
- Also adds a language string for the error.
- Also adds SERIAL_EOL as an alias for SERIAL_ECHOLN(“”)
2015-01-28 21:19:51 -08:00
Scott Lahteine
ff99ca3040
Fix alignment of Restore following PIDTEMP
...
Should be reading 4 x 4 PID values instead of 4 x 3
2015-01-28 20:48:32 -08:00
Philip Schell
6c285930cb
Fixing wrong pin to heater extruder 2 <-> 3
...
Extruder 2 and 3 was swapped
2015-01-28 23:57:22 +01:00
Victor Andueza
0d4ce27b79
Add pins_WITBOX file
2015-01-28 17:26:50 +01:00
Victor Andueza
13118cde33
Add bq Witbox 3D printer
2015-01-28 16:52:36 +01:00
Scott Lahteine
093fedfde8
Make EEPROM storage consistent
...
Update ConfigurationStore to always write dummy values for disabled
options, including FWRETRACT, DELTA, and SCARA. Update the EEPROM
version to “V15.” Also fixes a buffer overrun with axis_scaling in
Config_ResetDefault.
2015-01-28 01:08:48 -08:00
Scott Lahteine
34377ee512
Merge pull request #1427 from thinkyhead/fewer_preheat_strings
...
Remove language strings that only add a number
2015-01-27 22:10:08 -08:00
Scott Lahteine
7378a7fef4
Merge pull request #1408 from thinkyhead/cleanup_servo
...
Formatting cleanup of quiet sources
2015-01-27 22:09:04 -08:00
Scott Lahteine
5fbef6bed2
Merge pull request #1409 from thinkyhead/rename_lastnr
...
Rename lastnr to autostart_index and...
2015-01-27 22:07:23 -08:00
Scott Lahteine
53eea611b8
Fix MSG_NOZZLE
2015-01-27 22:00:32 -08:00
Scott Lahteine
d7211a5324
Changes for Portuguese too
2015-01-27 21:53:08 -08:00
Scott Lahteine
0a21727c0a
Portuguese (pt) and Brazilian Portuguese (pt-br)
2015-01-27 21:45:21 -08:00
Scott Lahteine
c90f2e77d8
Remove language strings that only add a number
...
This won’t reduce the string storage in the end, but it makes the
language files smaller. Also removed remaining unused strings.
2015-01-27 21:36:58 -08:00
Scott Lahteine
2ce4a102ee
Add support for Megatronics 3 a la #1426
2015-01-27 15:54:46 -08:00
Scott Lahteine
ae4b348d77
Make sure _Ex_PINS is defined
...
Also fix analogInputToDigitalPin so it uses proper C hex notation
2015-01-27 15:36:47 -08:00
Scott Lahteine
80be6f3f91
tweak tweak
2015-01-27 15:36:47 -08:00
Scott Lahteine
ebe78cb36f
tweak
2015-01-27 15:36:47 -08:00
Scott Lahteine
82474fef8a
Max endstop pins disabled by configuration
...
There’s no need to ask users to uncomment Max Endstop pins when they
have them. These will be set to -1 later if the endstop option is
disabled.
2015-01-27 15:33:21 -08:00
Scott Lahteine
8045e4d60d
Add support for 4th extruder
...
#1405 includes some changes to pins.h for a 4th extruder. This commit
applies those changes. It also deals with a possible problem with
SENSITIVE_PINS.
2015-01-27 15:33:21 -08:00
Scott Lahteine
df4f3e7712
cleanup
2015-01-27 15:32:34 -08:00
Scott Lahteine
b6ecbd8cc4
cleanup
2015-01-27 15:32:34 -08:00
Scott Lahteine
4e573134de
Cleanup heading
2015-01-27 15:32:34 -08:00
Scott Lahteine
574a5ab72a
Split up pins to make it more manageable
...
Hopefully this is helpful to organization and future expansion….
2015-01-27 15:32:34 -08:00
clefranc
d55c62bf9f
Update ConfigurationStore.cpp
...
Moved #endif to allow filament settings to print.
2015-01-27 13:28:37 -05:00
clefranc
e779641c73
Update ConfigurationStore.cpp
...
Added PIDTEMP dummy write to align EEPROM read/write operation.
2015-01-27 13:25:47 -05:00
Scott Lahteine
baac6e242d
Merge pull request #1419 from AnHardt/bootsplash
...
repair Bootsplash
2015-01-27 00:30:29 -08:00
AnHardt
75cf302da3
example configurations changed to meet Configuration.h
2015-01-27 00:01:33 +01:00
Philip Schell
61fd45a0c2
Add 4th extruder
2015-01-26 21:22:00 +01:00
Philip Schell
2650be4921
Add 4th extruder
2015-01-26 21:21:31 +01:00
Philip Schell
a9763d894e
Add 4th extruder
2015-01-26 21:20:56 +01:00
Philip Schell
4949088302
Add 4th extruder
2015-01-26 21:20:04 +01:00
Philip Schell
fc5204bd42
Add 4th extruder
2015-01-26 21:17:35 +01:00
Philip Schell
9834818ef7
Add 4th extruder
2015-01-26 21:16:23 +01:00
Philip Schell
8696963154
Add 4th extruder
2015-01-26 21:15:24 +01:00
Philip Schell
ee8a7419f4
Add 4th extruder
2015-01-26 21:14:18 +01:00
Philip Schell
e18403235d
Add 4th extruder
2015-01-26 21:12:55 +01:00
Philip Schell
7baee555f4
Add 4th extruder
2015-01-26 21:11:49 +01:00
Philip Schell
cebc7daf2a
Add 4th extruder
2015-01-26 21:10:42 +01:00
Philip Schell
ef4c7abb21
Update language_es.h
...
Add 4th extruder
2015-01-26 21:09:24 +01:00
Philip Schell
22e591518a
Update language_de.h
...
Add 4th extruder
2015-01-26 21:08:13 +01:00
Philip Schell
a20c35bb38
Update language_ca.h
...
Add 4th extruder
2015-01-26 21:04:31 +01:00
Jérémie FRANCOIS
dd301be52d
Added suport for multiline G-code commands in the LCD menus
2015-01-26 18:50:29 +01:00
AnHardt
aa48056c03
Made centering of bootlogo work and removed contraproductiv setScale2x2() in dogm_lcd_implementation.h
2015-01-26 17:26:22 +01:00
AnHardt
0d219b3e14
Make centering of STRING_SPLASH work
2015-01-26 16:00:10 +01:00
AnHardt
59315330dd
Remove definition of VERSION_STRING and replace where usend with STRING_VERSION
2015-01-26 15:52:01 +01:00
AnHardt
8c792c7b22
Make STRING_VERSION and VERSION_STRING the same
2015-01-26 15:40:44 +01:00
Scott Lahteine
865ca0ef04
Merge pull request #1405 from MagoKimbra/4th-extruders
...
All the additions look proper. I can't think of any other extruder-count-related items that you might have missed. So, with some optimism, I will merge this for testing.
2015-01-25 19:30:51 -08:00
MagoKimbra
3021f7f743
Fix PID_dT
...
Add PID_dT in temeprature.cpp
2015-01-25 17:56:14 +01:00
Scott Lahteine
a7b02975b7
No TEMP1 or TEMP2 pins for TEENSYLU || PRINTRBOARD
...
Pins 2 and 3 are probably general-use pins, since the filament sensor
uses pin 2.
2015-01-24 05:10:48 -08:00
Scott Lahteine
6723388f7f
Proposed fix to #1379 . Printrboard I2C LCD support
2015-01-24 05:01:02 -08:00
Scott Lahteine
03c9cb60e8
Rename lastnr to autostart_index and...
...
Replace instances of the number 13 with FILENAME_LENGTH where
appropriate.
2015-01-24 04:57:44 -08:00
MagoKimbra
ef5959a705
Fix Temperature
...
Githun insert this line when i merge with actual Branch development...
2015-01-24 13:49:29 +01:00
MagoKimbra
3d4ee6c868
Merge branch '4th-extruders' of https://github.com/MagoKimbra/Marlin into 4th-extruders
...
Conflicts:
Marlin/temperature.cpp
2015-01-24 13:41:15 +01:00
MagoKimbra
986e723eeb
Add 4th extruder
2015-01-24 13:37:58 +01:00
Scott Lahteine
f16bdd2ff2
Borrow from Ultimaker to fix MAX6675 SPI conflict
...
Changes to temperature.cpp from Ultimaker fork, intended to address
#1226 and #1227
2015-01-24 03:49:15 -08:00
Scott Lahteine
06c3b37933
Formatting cleanup of quiet sources
...
Formatting for code-folding plus minor style changes to less active
code.
2015-01-23 22:26:52 -08:00
Scott Lahteine
23fcd1ecb2
Merge pull request #1407 from thinkyhead/cleanup_marlinserial
...
Formatting cleanup of quiet sources
2015-01-23 21:33:43 -08:00
Scott Lahteine
fd78902194
Formatting cleanup of quiet sources
2015-01-23 21:11:50 -08:00
Scott Lahteine
5c1814383a
Merge pull request #1390 from floyd871/Development
...
Show Custom M_Code for Z-Probe Offset when entering M503
2015-01-23 20:08:23 -08:00
MagoKimbra
0ebf896070
Add 4th extruder
2015-01-23 23:13:06 +01:00
Michael Neumann
a9d7ab9530
Update ConfigurationStore.cpp
...
Done
2015-01-23 21:05:27 +01:00
Scott Lahteine
3a9a3e5ed8
Fix Issue #1356 – remove EXTRUDER1_Z_OFFSET
...
This define is not used.
2015-01-23 10:51:06 -08:00
Scott Lahteine
54d5b52a2e
Merge pull request #1399 from beanz/use-bed-defines-not-extruder-ones
...
Code wont compile with extruder but without bed runaway protection defined.
2015-01-23 08:36:25 -08:00
Mark Hindess
0ce252ba7a
This ifdef is for bed code so should use bed constants for testing.
...
Without this fix, the code wont compile with extruder but without bed
runaway protection defined.
2015-01-23 16:30:13 +00:00
Scott Lahteine
9040446780
Merge pull request #1395 from AnHardt/iss1394
...
removed function step_wait() from stepper.cpp
2015-01-23 06:58:10 -08:00
Scott Lahteine
25f79c5010
Merge pull request #1391 from CONSULitAS/Development-newBoard_K8200
...
Add: Board for Vellemann K8200 (derived from 3Drag)
2015-01-23 06:08:38 -08:00
Scott Lahteine
9ce75ab7de
Merge pull request #1386 from roglio/Development
...
Fixing a build error for melzi and gfx display
2015-01-23 06:00:24 -08:00
Scott Lahteine
15a00a5a7c
Add 1µs delay in other appropriate spots
2015-01-23 03:24:45 -08:00
AnHardt
23cb899c5a
removed function step_wait() from stepper.cpp
...
removed function step_wait() from stepper.cpp because its used nowhere.
2015-01-21 16:30:45 +01:00
Scott Lahteine
d9d4a78e0f
Add proper delay in stepper.cpp
...
Issue #1385 describes a delay that the compiler is optimizing out and
this solution.
2015-01-21 01:51:29 -08:00
CONSULitAS
d1322dafc9
Add: Example Configuration for Vellemann K8200 - based on new BOARD_K8200 #1391
...
# Add: Example Configuration for Vellemann K8200 - based on new
BOARD_K8200 #1391
* K8200: new folder in example_configurations for Vellemann K8200 (3Drag
clone - should work with 3Drag http://reprap.org/wiki/3drag , too. Please
report)
* K8200/Configuration.h/Configuration_adv.h: updated manually with
parameters form genuine Vellemann Firmware "firmware_k8200_marlinv2"
based on the recent development branch
I tested the changes on my K8200 with 20x4-LCD and Arduino 1.0.5 for
Windows (SD library added to IDE manually) - everything works well
2015-01-20 23:13:44 +01:00
CONSULitAS
3b50a5e2e6
Add: Board for Vellemann K8200 (derived from 3Drag)
...
## Add: Board for Vellemann K8200 (derived from 3Drag)
* Boards.h: updated comment for board 3Drag - K8200 removed
* Boards.h: added `BOARD_K8200` with ID 78
* language.h.: machine name and firmware URL for new board
* pins.h: added `K8200` to any `#if` with `3Drag` and corresponding
comments
2015-01-20 20:46:20 +01:00
Michael Neumann
2d454da3af
Update ConfigurationStore.cpp
...
Show Custom M Code when entering M503
2015-01-20 16:21:44 +01:00
Scott Lahteine
4f35de991a
Merge pull request #1383 from CONSULitAS/Development
...
Update Boards.h for Vellemann K8200 - comment only
2015-01-19 15:59:38 -08:00
roglio
22571ca13d
Revert "Configuration for Aurora Z605"
...
This reverts commit 935ee968a7
2015-01-19 15:02:11 +01:00
roglio
935ee968a7
Configuration for Aurora Z605
...
Still not fine tuned but working.
2015-01-19 11:18:52 +01:00
roglio
ccdbeda526
Fixing a build error for melzi and gfx display
...
When a melzi board and a full gfx are both selected, the build fails
blaming for some missing defines.
This is a fix for the issue: now my configuration works.
2015-01-19 10:43:26 +01:00
CONSULitAS
e13f159343
Update Boards.h for Vellemann K8200 - comment only
...
## Update Boards.h for Vellemann K8200 - comment only
* Boards.h: updated comment for board 3Drag - K8200 uses same board
2015-01-19 00:53:17 +01:00
CONSULitAS
51c7f2fd5a
Revert "## Add: Example Configuration for Vellemann K8200"
...
This reverts commit 5333590ac2
2015-01-19 00:37:57 +01:00
CONSULitAS
5333590ac2
## Add: Example Configuration for Vellemann K8200
...
* K8200: new folder in example_configurations for Vellemann K8200 (3Drag
clone - should work with 3Drag too, please report)
* K8200/language.h: updated machine name and URL for K8200
* K8200/Configuration.h/Configuration_adv.h: updated manually with
parameters
form genuine Vellemann Firmware "firmware_k8200_marlinv2" based on the
recent development branch
* K8200/files by Vellemann: added folder with original files from
Vellemann homepage, since there is no GitHub fork you could link to by
them
I tested the changes on my K8200 with 20x4-LCD and Arduino 1.0.5 for
Windows - everything works well
2015-01-19 00:28:55 +01:00
Denis Chertykov
ba3ac40b9d
Remove hardcoded programmer option (-cwiring). Use variable AVRDUDE_PROGRAMMER.
...
Change default value of AVRDUDE_PROGRAMMER to 'wiring'.
2015-01-18 20:18:43 +03:00
daid
53f971095d
Revert "Reduce PROGMEM warnings"
2015-01-16 16:48:22 +01:00
PxT
67b597ad46
Update printrboard pin assignments
...
Backported from Printrbot branch, allows the fan to work correctly.
2015-01-15 19:48:40 -08:00
galexander1
d4880a9e60
Revert "Move Sd library out into library"
2015-01-15 18:52:10 -05:00
Bo Herrmannsen
ccdb086fc8
Merge pull request #1363 from PxT/patch-1
...
Fixes #1361
2015-01-15 10:57:44 +01:00
Bo Herrmannsen
5151db5c2f
Merge pull request #1349 from msutas/patch-2
...
Improvement - G29 Option for Not Retracting Servo
2015-01-15 10:56:31 +01:00
Bo Herrmannsen
1746b2582b
Merge pull request #1332 from Sniffle/Development
...
Rambo FAN_PIN documentation and servo support
2015-01-15 10:56:17 +01:00
Bo Herrmannsen
4b51b5a46d
Merge pull request #1357 from odewdney/SDlib
...
Move Sd library out into library
2015-01-15 10:56:07 +01:00
Bo Herrmannsen
f2cb4a3655
Merge pull request #1353 from thawkins/Development
...
fix avrdude upload in makefile
2015-01-15 10:55:33 +01:00
PxT
9fd4292923
Fixes #1361
2015-01-13 10:59:50 -08:00
odewdney
f84ff4ba7d
Move SD Fat library out of main src
2015-01-13 13:31:55 +00:00
Bo Herrmannsen
ab074dac17
Merge pull request #1344 from grob6000/independent_pid
...
Independent PID parameters for each extruder
2015-01-13 12:10:37 +01:00
Bo Herrmannsen
d4a665694a
Merge pull request #1350 from odewdney/Development
...
Reduce PROGMEM warnings
2015-01-13 11:26:50 +01:00
odewdney
9d9c859ac1
First move of SdFat library
2015-01-13 08:04:32 +00:00
Tim Hawkins
5045d17a39
fix avrdude upload in makefile
2015-01-13 13:01:43 +08:00
msutas
3a5a6f42fb
Corrected the ABL grid option
...
G29 E was not retracting the probe on the last probe point when used with ABL grid. Corrected.
2015-01-12 11:07:46 +02:00
odewdney
cd55a93a13
re-add blank line
2015-01-11 19:22:35 +00:00
odewdney
23bfe30036
moved include themister to temperature.c
2015-01-11 18:18:32 +00:00
odewdney
538859669d
Removing compiler warnings for progmem
2015-01-11 18:14:21 +00:00
grob6000
bf2c923db5
Make multiple PID parameters a config option
...
* Adds config parameter `PID_PARAMS_PER_EXTRUDER` - allows single PID
parameters to be used where this would be preferable (e.g. dual
identical extruders)
* When disabled, will use `float Kp, Ki, Kd, Kc;` as before.
Preprocessor macros used to switch between.
* ultralcd.cpp defines extra menus for extra parameters only where
required
* M301 reports `e:xx` only if independent pid parameters enabled
* EEPROM structure still leaves space for 3 extruders worth, when undef
will save single parameter to all extruder positions, but only read the
first
* Switching off saves approx 330 B with no LCD enabled, 2634B with LCD
(RRD) enabled: this is significant.
* LCD modifications should be tested.
2015-01-11 13:50:17 +11:00
grob6000
0877aa0fe0
Merge remote-tracking branch 'upstream/Development' into independent_pid
2015-01-11 11:32:58 +11:00
msutas
e0beb98fd3
Improvement - G29 Option for Not Retracting Servo
...
This change introduces an improvement to G29 command on Marlin.
Auto bed leveling operation's reliability is based on the repeatability of the Z-probe switch and the servo. This change introduces an option to G29 command. When the G29 command is sent with an "e" option, during auto bed levelling the servo is not retracted between probes which decreases the bias on auto bed levelling resulting from servo.
G29 command does the auto bed probing as it is.
G29 E command engages the servo on first probing point, probes all points and retracts the servo after probing the last point.
Please comment your opinions, test on your printer and check the code on a programmer's perspective. (I am not a good programmer.)
2015-01-10 17:25:39 +02:00
grob6000
7d32c7f36d
Multiple PID parameter edit for ultralcd
...
* Depending on extruder count, will add menu items for ultralcd to edit
individual PID parameters for each extruder
* Added menu items to each language_xx.h
* Builds OK, but recommend testing with typical LCD
2015-01-11 01:14:02 +11:00
Steffen Vogel
69dc411ae0
Merge branch 'Development' of github.com:MarlinFirmware/Marlin into LogoLCD
...
Conflicts:
Marlin/dogm_lcd_implementation.h
2015-01-10 14:57:11 +01:00
grob6000
3e2af67ce3
Fix R-H compatibility
...
* R-H reads incorrect M301 line from EEPROM output if more than one is
present. Reverted to original output format, using only E0 value.
2015-01-10 16:44:28 +11:00
grob6000
37c7e8300f
Independent PID parameters for each extruder
...
* Variables Kp, Ki, Kd, Kc now arrays of size EXTRUDERS
* M301 gains (optional, default=0) E parameter to define which
extruder's settings to modify. Tested, works with Repetier Host's EEPROM
config window, albeit only reads/updates settings for E0.
* All Kp, Ki, Kd, Kc parameters saved in EEPROM (version now v14), up to
3 extruders supported (same as Marlin in general)
2015-01-10 16:35:12 +11:00
Scott Lahteine
326b925557
DOGLCD and LCD_PROGRESS_BAR to coexist
...
Small changes (and formatting to confuse the diff’er) which first
allows DOGLCD and LCD_PROGRESS_BAR to be enabled in tandem, then a
#warning (rather than error) that the extra progress bar / message
options don’t apply to graphical displays at this time. This leaves
open perhaps combining the progress bar and message area in some future
(or forked custom) graphical LCD display arrangement (at which time the
relevant variables may be moved into ultralcd.cpp with externs in
ultralcd.h). I also added a conditional error that the progress bar and
the filament display may not work well together.
2015-01-09 18:16:56 -08:00
Erik van der Zalm
1aade4a8e2
Merge branch 'Development' of https://github.com/MarlinFirmware/Marlin into Development
2015-01-09 21:33:29 +01:00
Erik van der Zalm
8a2e84e3f1
Possible fix for FWRETRACT with 0 zlift.
2015-01-09 21:33:02 +01:00
Steffen Vogel
905aab3b85
added missing #endif
2015-01-09 20:23:38 +01:00
Steffen Vogel
b9cf1465a7
updated LCD bouts with new strings and bitmaps
...
new version is pretty generic and should work in most scenarios
2015-01-09 18:49:59 +01:00
Steffen Vogel
c7632be5cc
added high and low resolutions version of splash screen logo (saving code size)
2015-01-09 18:49:24 +01:00
Steffen Vogel
8f0dba7cbf
adding string for bouts splash string to config
2015-01-09 18:48:30 +01:00
Bo Herrmannsen
d94109e886
updated logo post and ver info
2015-01-09 15:51:15 +01:00
Bo Herrmannsen
cd33b5b062
changed logo and ver info
...
logo is now 110 pixels wide and starts 9 pixels in from top left corner and also 9 pixels down from same corner... this will give a 9 pixel border all way round
ver info is placed centered and there is a 9 pixel from bottom of display to ver info
2015-01-09 15:44:47 +01:00
Bo Herrmannsen
9b6c1cfda6
removed unneeded lines in welcome msg
2015-01-09 15:20:41 +01:00
Bo Herrmannsen
ffa09f86f4
moved ver info 5 spaces to the right
2015-01-09 13:31:23 +01:00
Alex Borro
2bbb68be8a
Fix calculation of BAL grid fitting into the bed
...
The previous calc was wrong. Between N points there are only N-1 gaps,
not N.
So changing AUTO_BED_LEVELING_GRID_POINTS to
(AUTO_BED_LEVELING_GRID_POINTS-1)
2015-01-09 10:17:33 -02:00
Bo Herrmannsen
590caafa2d
changed ver info
2015-01-09 13:17:08 +01:00
Bo Herrmannsen
3bb9b31515
changed boot logo a bit to test if fat wall goes away
2015-01-09 12:51:21 +01:00
Steffen Vogel
da192c521f
Merge pull request #1333 from andrewsil1/development
...
Fix grammar/typos in new Configuration.h option
2015-01-08 00:34:01 +01:00
Erik van der Zalm
3a30d45c2e
Revert "issue 968 for dev branch"
2015-01-07 23:40:17 +01:00
andrewsil1
269ec9f87f
Fix grammar/typos in new Configuration.h option
...
(For the SLOW_PWM_HEATERS option)
2015-01-07 12:41:09 -08:00
Todd Swindoll
506353892e
Rambo Pin documentation and servo support
...
Updated pins reference and servo support.
cross referenced between Rambo 1.1, 1.2, and 1.3
2015-01-07 11:02:05 -06:00
Steffen Vogel
8d7bfd03d8
moved/renamed documentation stuff to top-level directory
2015-01-07 15:33:50 +01:00
Bo Herrmannsen
3c9e6b7b62
added link for pic to hex converter
2015-01-07 14:28:51 +01:00
Bo Herrmannsen
0e760274bd
changed reprap logo to marlin logo
2015-01-07 14:27:51 +01:00
Bo Herrmannsen
b291a422e9
added square png version of logo
...
406*406 pixels
2015-01-07 13:00:37 +01:00
Luis E Alvarado
7ae548cf34
Update Marlin Firmware URL
2015-01-07 05:26:47 -06:00
Erik van der Zalm
8f9067faa6
Added marlin logos. (Designed by Ahmet Cem TURAN)
2015-01-07 12:21:16 +01:00
Bo Herrmannsen
addf52fd4a
Merge pull request #1328 from DinoMesina/development
...
Some corrections and new features
2015-01-06 23:52:32 +01:00
Dino Del Favero
5cfe13f240
Correct some mistakes
2015-01-06 21:55:08 +01:00
Dino Del Favero
c7e2d73039
Merge branch 'development'
...
ok
2015-01-06 20:18:03 +01:00
Alex Borro
422a958a34
Fix CoreXY speed calculation
...
For cartesian bots, the X_AXIS is the real X movement and same for
Y_AXIS.
But for corexy bots, that is not true. The "X_AXIS" and "Y_AXIS" motors
(that should be named to A_AXIS
and B_AXIS) cannot be used for X and Y length, because A=X+Y and B=X-Y.
So we need to create other 2 "AXIS", named X_HEAD and Y_HEAD, meaning
the real displacement of the Head.
Having the real displacement of the head, we can calculate the total
movement length and apply the desired speed.
2015-01-06 16:39:48 -02:00
Dino Del Favero
038fccd7a1
I have added some code in the "temperature.cpp" for have the possibility of control the time of the states with the heater drived by relays, with this feature now it is possible use PID function in conjunction with relay to control the temperature. I have made some tests and the temperature stay always in the range of +-1°C from the setted temp.
...
There is the possibility of turn on this features adding "#define SLOW_PWM_HEATERS" in Configuration.h
2015-01-06 18:32:17 +01:00
DinoMesina
6730335657
Update Configuration.h
2015-01-06 18:06:02 +01:00
Bo Herrmannsen
4ffecdbf7d
Merge pull request #1313 from wgm4321/Development
...
Re-enable filament menu with recalc fix when enabling/disabling mm3
2015-01-06 13:47:49 +01:00
Steffen Vogel
672f764b4d
replaced ASCII GPL v3 license by markdown version
...
moved new COPYING file to top-level directory to make it more visible and remove clutter from Marlin subduer
2015-01-06 11:49:05 +01:00
Steffen Vogel
f25e793cff
rename stepper lookup table scipt to be consistent with termistor lookup table script
2015-01-06 10:30:20 +01:00
Steffen Vogel
df17a6a1b4
fix #1305 by proposed workaround (thanks gaby64)
2015-01-06 10:29:26 +01:00
Steffen Vogel
f7e65935fb
make use of power operator
2015-01-06 10:28:43 +01:00
Steffen Vogel
4e02aff9b5
automatically determine min/max temp for terminator
2015-01-06 10:28:19 +01:00
Steffen Vogel
81363bc441
more cleanups
2015-01-06 10:27:40 +01:00
Steffen Vogel
95f4a55820
refactored termistor table calculation to be in line with wikipedia's article about Steinhart-Hart coefficients
2015-01-06 08:24:59 +01:00
Steffen Vogel
21205cc3d8
more cleanups in the termistorTable generation script
2015-01-06 08:23:51 +01:00
Steffen Vogel
fb0996b5db
improved output aligment and precision
2015-01-06 08:20:52 +01:00
Steffen Vogel
538231edfd
cosmetic whitespace cleanup and comments added/updated
2015-01-06 08:20:20 +01:00
wgm4321
067b509479
Re-enable filament menu with recalc fix when enabling/disabling mm3
2015-01-05 22:29:29 -05:00
wgm4321
a19f2f8ae7
Disable volumetric menu item due to missing recalc of of multipliers when enabled/disabled
2015-01-04 22:15:16 -05:00
wgm4321
f24dda9700
Revert "Make sure volumetric multipliers are recalc'ed during menu enable/disable of mm3"
...
This reverts commit dd7e4ee97f
2015-01-04 22:08:41 -05:00
wgm4321
ec4681ab6b
Revert "Add "Detailed Z Probe" menu item with ABL is defined."
...
This reverts commit 2b9722f387
2015-01-04 21:53:37 -05:00
wgm4321
dd7e4ee97f
Make sure volumetric multipliers are recalc'ed during menu enable/disable of mm3
2015-01-04 21:44:55 -05:00
wgm4321
2b9722f387
Add "Detailed Z Probe" menu item with ABL is defined.
2015-01-04 21:42:16 -05:00
Dan Royer
9472bbe51d
issue 968 for dev branch
...
try, try again.
If 'OK' is garbled on sending PC won't receive it. Both machines will
wait on each other forever. This resends OK if nothing is heard from PC
for a while to avoid this bad case.
2015-01-04 12:17:46 -08:00
alexborro
d2b6e62996
Merge pull request #1309 from philfifi/fix_temp_runaway
...
temp runaway: proper cast to prevent any overflow.
2015-01-04 12:55:58 -02:00
Philippe L
30248214c7
temp runaway: proper cast to prevent any overflow.
2015-01-04 14:23:31 +01:00
Bo Herrmannsen
c5f138ea07
Merge pull request #1291 from alhirzel/Development
...
Define analogInputToDigitalPin only if needed
2015-01-04 12:53:41 +01:00
odewdney
652895d656
try different proproc for CI failure
2015-01-04 11:15:23 +00:00
Bo Herrmannsen
3d9f4ac757
Merge pull request #1303 from wgm4321/Development
...
Fix for cant compile when REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER ...
2015-01-04 01:29:26 +01:00
wgm4321
04fb34c7ff
Add English defines for filament menu to non-English to prevent compile errors until translated
2015-01-03 17:28:05 -05:00
wgm4321
f8aa5ff771
Fix for cant compile when REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER defined
2015-01-03 17:10:13 -05:00
odewdney
39fae9e3a3
Fix progmem warning
...
Borrow code from https://github.com/arduino/Arduino/issues/1793
2015-01-03 21:30:16 +00:00
Alexander Hirzel
f36fd3ddec
Merge branch 'Development' of https://github.com/ErikZalm/Marlin into Development
2015-01-02 12:39:39 -05:00
Scott Lahteine
b5e50cdd4e
Move scripts and documentation to subfolders
2015-01-02 08:53:09 -08:00
Alexander Hirzel
eed451e034
rework analogInputToDigitalPin definition
2015-01-02 11:14:20 -05:00
Lane Roberts
1f520a5a8c
Due to the fix for #1248 , X and Y probe offsets must not be floats.
...
The compiler does not support comparing float values: "error: floating constant in preprocessor expression"
The loss in X/Y precision shouldn't matter for Z probes, as most microswitches or inductive sensors are larger than 1mm square anyway.
2015-01-02 11:12:16 -05:00
wgm4321
b32be2dc64
Fix syntax error caused by previous changes.
2015-01-02 11:12:16 -05:00
wgm4321
edac64e7d2
Add Filament menu and add Filament/Retract settings to config store.
2015-01-02 11:12:15 -05:00
Alexander Hirzel
ecda6cdc0a
Fix typo, PID_BED_POWER -> MAX_BED_POWER
2015-01-02 11:12:15 -05:00
David Forrest
f3e503e725
temperature.cpp: Fix typo of PID_MAX to MAX_BED_POWER for the bed.
2015-01-02 11:12:15 -05:00
David Forrest
1d5d853c9a
temperature.cpp: Fix typo of MAX_BED_PID to MAX_BED_POWER.
2015-01-02 11:12:15 -05:00
Bo Herrmannsen
63da6900b0
Merge pull request #1282 from vandarin/Development
...
Due to the fix for #1248 , X and Y probe offsets must not be floats.
2015-01-02 15:35:40 +01:00
Bo Herrmannsen
a18b625534
Merge pull request #1261 from wgm4321/Development
...
Add Filament menu and add Filament/Retract settings to config store.
2015-01-02 15:35:29 +01:00
Alexander Hirzel
ae12ad0d6c
Fix typo, PID_BED_POWER -> MAX_BED_POWER
2015-01-02 01:38:03 -05:00
alexborro
80b17ab573
Merge pull request #1285 from drf5n/PID_CI_v2
...
temperature.cpp: Fix typo of MAX_BED_PID to MAX_BED_POWER.
2015-01-01 22:56:21 -02:00
David Forrest
625860f086
temperature.cpp: Fix typo of PID_MAX to MAX_BED_POWER for the bed.
2015-01-01 19:24:42 -05:00
David Forrest
6583bb781d
temperature.cpp: Fix typo of MAX_BED_PID to MAX_BED_POWER.
2015-01-01 19:11:42 -05:00
Lane Roberts
2701dd8a17
Due to the fix for #1248 , X and Y probe offsets must not be floats.
...
The compiler does not support comparing float values: "error: floating constant in preprocessor expression"
The loss in X/Y precision shouldn't matter for Z probes, as most microswitches or inductive sensors are larger than 1mm square anyway.
2014-12-31 12:34:59 -06:00
Grogyan
6b82415c81
Update pins.h
...
Somehow the pin definitions for the MAX6675 Slave Select/Chip Select got changed back to the hardware SPI SS/CS.
Pin 49 cannot be used as that is used by the SD card socket to detect if an SD card is present.
Pin 53 is the Hardware SPI SS, which is dedicated, nicely, to the SD card SS and therefore cannot be used as the MAX6675 SS
Pin 66 is in Aux2 port adjacent to the Hardware SPI interface port on RAMPS 1.4, and is currently not used for anything.
2014-12-31 13:04:16 +13:00
Bo Herrmannsen
692a01b1c7
Merge pull request #1277 from thinkyhead/fix_regressions
...
Fix regressions affecting compilation
2014-12-30 16:49:08 +01:00
Scott Lahteine
2ec2bf1564
Fix regressions affecting compilation
...
This fixes two regressions, caused by #1167 and #1191 .
2014-12-30 07:36:18 -08:00
Scott Lahteine
e7db8ee9e5
ftostr32np > ftostr32sp
...
sp=space-padded, similar to: ns=no-sign
2014-12-30 07:26:25 -08:00
Scott Lahteine
10e1b6ef8b
Least stack-usage self-contained ftostr32np()
...
This is the optimal code for a self-contained formatter, although the
original code is crafty in being smaller and simpler, and can be
evaluated as using the original output as a scratch pad for state,
making the final formatter more straightforward. While this code is
longer, all code-paths are minimal.
2014-12-30 07:26:25 -08:00
Scott Lahteine
d1f21d1189
As it should be
2014-12-30 07:26:25 -08:00
Scott Lahteine
449dad71f2
Least stack-usage self-contained ftostr32np()
...
This is the optimal code for a self-contained formatter, although the
original code is crafty in being smaller and simpler, and can be
evaluated as using the original output as a scratch pad for state,
making the final formatter more straightforward. While this code is
longer, all code-paths are minimal.
2014-12-30 07:26:24 -08:00
Scott Lahteine
a2109cb492
Patch to make Z look more like X and Y on UltraLCD
2014-12-30 07:26:24 -08:00
Bernhard Kubicek
3d1da45f3e
Update Marlin.h
2014-12-30 08:30:37 +01:00
bkubicek
d02daec08f
fixed compilation
2014-12-30 08:04:06 +01:00
Caleb Anderson
991a74b75b
Move delta calibration menu to sample delta configuration.
...
Turn off by default.
2014-12-29 18:03:56 -07:00
Bo Herrmannsen
67fd8f0727
Merge pull request #1267 from RobotCaleb/LanguageFix
...
Language Fix - Using the new language implementation wasn't behaving as expected.
2014-12-29 19:49:11 +01:00
Caleb Anderson
236db44669
Fix spacing
2014-12-29 10:44:55 -07:00
Caleb Anderson
e6774fb7d2
Using the new language implementation wasn't behaving as expected.
...
No matter what LANGUAGE_CHOICE was set to it would always take the en branch.
I revamped it a bit to use a macro to create the language include file name. This required a slight tweak to the RU declaration since it's special-cased in a couple places in code.
This is an attempt to pull my changes from #1222 over.
2014-12-29 10:43:19 -07:00
Caleb Anderson
cb047e9070
Actual menu change. Moved menu logic to not be shown unless not currently printing. (untested but straight-forward, printer in a bad state currently)
2014-12-29 10:19:25 -07:00
Caleb Anderson
5b336a4cdb
Delta calibration menu based on http://minow.blogspot.com/index.html#4918805519571907051
...
To test/enable, uncomment the #define DELTA_CALIBRATION_MENU in Configuration.h
2014-12-29 10:13:00 -07:00
Bernhard Kubicek
10ad9f1062
Addes servo0 pin ultimaker
2014-12-29 17:27:14 +01:00
Bernhard Kubicek
f24c5d82e3
Update Marlin_main.cpp
...
fixed minor typo
2014-12-29 17:17:30 +01:00
Wurstnase
8a6f098cc6
Expand manage_inactivity #1264
...
void manage_inactivity(bool ignore_stepper_queue=false)
standard is false so it is not necessary to change additional code. this
change should be better, hopefully nophead like this :)
2014-12-29 17:07:22 +01:00
Wurstnase
d1995aec7a
Rename ignore_blocks_queued
...
more speaking name
2014-12-29 16:47:08 +01:00
Wurstnase
4122de9d17
change filament issue
...
make a more general solution
2014-12-29 16:31:00 +01:00
wgm4321
d60efc3b5d
Fix syntax error caused by previous changes.
2014-12-28 20:47:59 -05:00
wgm4321
cb12161191
Add Filament menu and add Filament/Retract settings to config store.
2014-12-28 20:43:14 -05:00
fmalpartida
ec33df0554
Merge branch 'SAV-MkI_merge' into Development
...
Tested for SAV MKI and SAV 3D LCD on lewihe.
2014-12-28 19:54:06 +01:00
Matthew Schick
0468f81950
Update for pull request #837
2014-12-28 11:22:44 -05:00
Matthew Schick
6e42c9e305
Add fwretract settings to M503 output
2014-12-28 11:22:44 -05:00
alexborro
3afe66bb0c
Fix issues #1248 , #1240
...
- Fixed issue when BAL area probing is shorter than it should be for
grid probing
- Warning when BAL activated with Delta Kinematics
- Fix XY_TRAVEL_SPEED when homing Z axis
2014-12-28 13:27:39 -02:00
Lukas Obermann
9eb6df17a7
Consider negative Z Offsets when auto bed leveling is active
2014-12-28 12:46:35 +01:00
Bo Herrmannsen
c9f60183a9
Merge pull request #1233 from NarimaanV/Development
...
Fixed BABYSTEPPING feature
2014-12-28 10:13:21 +01:00
Bo Herrmannsen
0d957872a0
Merge pull request #1234 from gregrebholz/issue_1069
...
Fixes #1069 . Added "auto fan" checks to PID_autotune.
2014-12-28 10:12:08 +01:00
Bo Herrmannsen
9c07d28bd6
Merge pull request #1249 from drf5n/PID_CI_v2
...
temperature.cpp: Add Conditional Integration to prevent excessive integral windup
2014-12-28 10:09:25 +01:00
Bo Herrmannsen
23e768dffa
Merge pull request #1250 from chertykov/Development
...
Move initialization of errormagic[] and echomagic[] to Marlin_main.cpp
2014-12-28 10:09:08 +01:00
Scott Lahteine
2f467e2797
LCD Progress Bar
2014-12-27 22:26:14 -08:00
Denis Chertykov
050ca9ca13
Move initialization of errormagic[] and echomagic[] to Marlin_main.cpp
2014-12-28 09:09:42 +03:00
David Forrest
cf52c48d19
Configuration.m: Set PID_INTEGRAL_DRIVE_MAX from PID_MAX from BANG_MAX.
...
Current defaults are all 255. If it makes sense to reduce them, they should come down together, and
be in a PID_INTEGRAL_DRIVE_MAX <= PID_MAX <- BANG_MAX relationship.
2014-12-27 15:26:09 -05:00
David Forrest
984177c40c
temperature.cpp:Add PID Conditional integration on heated bed.
2014-12-27 15:26:09 -05:00
David Forrest
c9b8435749
heater.c: Limit PID I term with conditional integration.
2014-12-27 15:26:09 -05:00
Greg Rebholz
7ecb7cbd46
Added "auto fan" checks to PID_autotune
2014-12-23 23:50:00 -05:00
NarimaanV
7667949aca
Fixed BABYSTEPPING feature
...
Moved PSTR() macro to correct place which was causing the " initializer fails to determine size of '__c' " when attempting to compile with BABYSTEPPING enabled.
2014-12-23 12:49:54 -05:00
alexborro
d74aabf259
Revert "Change Auto_Bed_Leveling to Auto_Bed_Compensation"
2014-12-21 10:06:05 -02:00
Bo Herrmannsen
60628864ca
Merge pull request #1167 from thinkyhead/sd_freemem
...
Use SdFatUtil::FreeRam() for freeMemory() if there
2014-12-20 18:31:21 +01:00
Bo Herrmannsen
889d7ba218
Merge pull request #1177 from martin-pr/probing_z_speed
...
Split do_blocking_move() to XY and Z sections
2014-12-20 18:30:35 +01:00
Bo Herrmannsen
5e7bd2dc87
Merge pull request #1200 from chertykov/Marlin_v1
...
Fix syntax errors in #ifdef
2014-12-20 18:29:39 +01:00
Denis Chertykov
b086394178
Fix syntax errors in #ifdef.
2014-12-20 19:33:43 +03:00
John Davis
39d28a9bbf
Update qr_solve.h
...
Changed level to compensation
2014-12-19 17:53:55 -05:00
John Davis
6325968a39
Update qr_solve.cpp
...
Changed leveling to compensation
2014-12-19 17:52:13 -05:00
John Davis
e99f24ff2f
Update planner.h
...
Changed level and leveling to compensation.
2014-12-19 17:51:14 -05:00
John Davis
ac204028e7
Update planner.cpp
...
Changed level and leveling to compensation
2014-12-19 17:49:22 -05:00
John Davis
4315c2547a
Update Marlin_main.cpp
...
Changed level and leveling to compensation (except with "verbose_level" and "lcd_reset_alert_level").
2014-12-19 17:41:29 -05:00
John Davis
f21c65918f
Update Servo.h
...
Changed AUTO_BED_LEVELING to AUTO_BED_COMPENSATION
2014-12-19 17:20:09 -05:00
John Davis
58c4473bea
Update Servo.cpp
...
Changed AUTO_BED_LEVELING to AUTO_BED_COMPENSATION
2014-12-19 17:18:55 -05:00
John Davis
825c46024d
Update vector_3.cpp
...
Changed AUTO_BED_LEVEL to AUTO_BED_COMPENSATION
2014-12-19 17:16:31 -05:00
John Davis
cfe80e1def
Update vector_3.h
2014-12-19 17:14:35 -05:00
John Davis
7464d3c96a
Update ConfigurationStore.cpp
...
Changed AUTO_BED_LEVEL to AUTO_BED_COMPENSATION
2014-12-19 17:08:43 -05:00
John Davis
81568c3c6d
Update Configuration.h
...
Changed Auto Bed Level to Auto Bed Compensation
2014-12-19 17:06:56 -05:00
Bo Herrmannsen
03e489aaad
Merge pull request #1197 from foosel/fix/issue_1147
...
Fixes commands not being acknowledged in the same order they are received in
2014-12-19 14:39:05 +01:00
Gina Häußge
acc0e75279
Fixes commands not being acknowledged in the same order they are received
...
in
G0 to G3 were previously acknowledged in the get_command method, causing
them to be possibly acknowledged before commands coming after them that
were acknowledged in process_commands.
This patch fixes this, moving the acknowledgement of G0 to G3 to the
process_commands method as well. These commands are therefore no
longer acknowledged when the enter the cmd_buffer but instead only
acknowledged when the enter the plan_buffer.
Guaranteeing that commands are acknowledged in the same order in which
they were received by the firmware allows host software to be able to
track the life cycle of commands and such a better management of the
firmware's serial buffers as well as better internal command processing
and response parsing without having to depend on throwing an epic
amount of regular expressions against each line received back from the
firmware.
Fixes ErikZalm/Marlin#1147
2014-12-19 14:20:36 +01:00
daid
17de96ace7
Merge branch 'Marlin_v1' into revert-1154-sd_sorting
...
Conflicts:
Marlin/cardreader.cpp
Marlin/cardreader.h
2014-12-18 23:13:50 +01:00
Scott Lahteine
6880e93b75
Happy configs
2014-12-18 14:02:47 -08:00
Scott Lahteine
3b1f186c0c
Clean up configs
2014-12-18 13:59:31 -08:00
Scott Lahteine
f83d0f2a68
Defines for electronics boards
...
Added boards.h which contains defines for all the board numbers, plus
some shorthand macros for less typing.
2014-12-18 13:59:31 -08:00
Bo Herrmannsen
bd25e7393b
Merge pull request #1192 from thinkyhead/split_language
...
Split up languages.h. Use ISO language codes.
2014-12-18 22:26:55 +01:00
Bo Herrmannsen
174f8d3631
Added example configs for printers from http://tvrrug.org.uk/
2014-12-18 20:34:24 +01:00
Scott Lahteine
e970461adb
Clean up, move unused to the bottom, add headings
2014-12-18 10:33:00 -08:00
Scott Lahteine
0c06e97e98
Split up languages.h, use ISO codes
...
Breaking up languages.h makes it easier to translate. Using language
codes makes it easier to select a language and sets the naming standard.
2014-12-18 09:31:19 -08:00
Bo Herrmannsen
a9c334e8bc
Merge pull request #1191 from thinkyhead/code_shrink
...
Shrink and Optimize
2014-12-18 17:23:11 +01:00
Bo Herrmannsen
842da54e68
Merge pull request #1187 from thinkyhead/fix_constants
...
A few constants where they belong
2014-12-18 17:21:46 +01:00
Scott Lahteine
07c6b5ab71
Using axis constants
2014-12-18 08:13:08 -08:00
Scott Lahteine
1857e611d3
Other small tweaks
2014-12-18 07:49:16 -08:00
Scott Lahteine
63e1665fa9
Reduce ultralcd.cpp redundancies
2014-12-18 07:30:05 -08:00
Scott Lahteine
e69313fc2b
Reduce dogm lcd code
2014-12-18 07:03:40 -08:00
Bo Herrmannsen
bd22405412
Merge pull request #1190 from thinkyhead/sd_sorting
...
Wrap call to flush_presort
2014-12-18 12:50:55 +01:00
Scott Lahteine
49791949af
Wrap call to flush_presort
2014-12-18 03:47:12 -08:00
Scott Lahteine
0450e83fa5
Use SdFatUtil::FreeRam() for freeMemory() if there
2014-12-17 23:26:52 -08:00
Scott Lahteine
f21cce0b28
Rebase to Marlin_v1
2014-12-17 23:07:36 -08:00
Scott Lahteine
e4b98011cf
And one more...
2014-12-17 23:01:24 -08:00
Scott Lahteine
60598b4cdd
A few constants where they belong
2014-12-17 23:01:24 -08:00
Bo Herrmannsen
280504e2e0
Merge pull request #908 from alromh87/Marlin_v1
...
Support for Gen3 Monolithic electronics
2014-12-17 22:28:07 +01:00
Bo Herrmannsen
31ca3de72f
Merge pull request #819 from neildarlow/Marlin_v1
...
Activate LiquidTWI2 device detection and space-pad LCD status line.
2014-12-17 21:42:53 +01:00
Bo Herrmannsen
e83cfc0a62
Merge pull request #1163 from thinkyhead/lcd_abort_message
...
LCD "Abort" Message
2014-12-17 21:30:19 +01:00
Bo Herrmannsen
0b310ab6c5
Merge pull request #1153 from xinfab/negative_values_in_menu
...
Negative values in menu
2014-12-17 20:58:01 +01:00
Bo Herrmannsen
91d740e128
Merge pull request #1141 from filipmu/Filament-Sensor
...
Display filament sensor data on a 20x4 LCD or Graphical LCD
2014-12-17 20:38:30 +01:00
alexborro
ab355a90d3
Revert "SD Sort and Buffer"
2014-12-17 14:50:59 -02:00
Scott Lahteine
d088b5f30f
Remove debug echo
2014-12-13 06:33:12 -08:00
Scott Lahteine
1fad8e6a81
Proper long file name var
2014-12-13 06:17:00 -08:00
Scott Lahteine
29e854c535
Disable SDCARD_SORT_ALPHA by default
...
For legacy boards it’s better if this option is disabled.
2014-12-13 06:12:34 -08:00
Scott Lahteine
6599adc184
Polish up a little...
2014-12-13 06:12:34 -08:00
Scott Lahteine
a12eec33e2
Completed SORT_USES_MORE_RAM implementation
...
For the MORE_RAM option we need to buffer both the short and long
names, even though long names are sometimes redundant. Worst case, all
the names are max length. We can save some RAM by not storing these. We
could save more RAM by only storing the visible part of the long name.
2014-12-13 06:12:34 -08:00
Scott Lahteine
c9486ebb85
Improvements, more SORT_USES_MORE_RAM
...
With this option, always keeps the dir in RAM, doubling as a cache for
getfilename. A board with only 8K of SRAM is cutting it very close.
2014-12-13 06:12:33 -08:00
Scott Lahteine
b6ffea612a
Expand on More RAM concept, address minor bugs
2014-12-13 06:10:44 -08:00
Scott Lahteine
8196b36ad9
SD Card Alpha Sorting
...
First iteration of alphabetical sorting for SD cards, both
slow+efficient and fast+rammy. Option for folders to sort first, last,
or not at all.
2014-12-13 06:07:52 -08:00
Scott Lahteine
cf749dbeda
Completed SORT_USES_MORE_RAM implementation
...
For the MORE_RAM option we need to buffer both the short and long
names, even though long names are sometimes redundant. Worst case, all
the names are max length. We can save some RAM by not storing these. We
could save more RAM by only storing the visible part of the long name.
2014-12-13 06:03:39 -08:00
Scott Lahteine
ae081d0fe0
Improvements, more SORT_USES_MORE_RAM
...
With this option, always keeps the dir in RAM, doubling as a cache for
getfilename. A board with only 8K of SRAM is cutting it very close.
2014-12-13 06:03:39 -08:00
Scott Lahteine
785143a013
Expand on More RAM concept, address minor bugs
2014-12-13 06:03:39 -08:00
Scott Lahteine
0cbbba08bd
SD Card Alpha Sorting
...
First iteration of alphabetical sorting for SD cards, both
slow+efficient and fast+rammy. Option for folders to sort first, last,
or not at all.
2014-12-13 06:03:39 -08:00
Scott Lahteine
3ebfd29312
Print a message when printing is aborted
...
Messages in gcode files like “M117 Printing…” were not being cleared on
Stop Print.
2014-12-13 06:01:46 -08:00
Martin Prazak
2ef0669b19
Split do_blocking_move() to XY and Z sections to make sure that the Z homing feedrate is not exceeded
2014-12-07 15:31:46 +00:00
Neil Darlow
64139f5e5a
Merge https://github.com/ErikZalm/Marlin into Marlin_v1
2014-12-04 21:09:03 +00:00
Bo Herrmannsen
edfcf3b527
Toshiba Stepper Driver support
...
Tosh stepper drivers need to be driven slower, so the stepper code
was interleaved to separate the pin HIGH from the pin LOW. This adds
enough instructions to make it work, without needing nops.
2014-12-03 15:01:52 +01:00
Bo Herrmannsen
c429a4b3ec
Toshiba Stepper Driver support
...
Tosh stepper drivers need to be driven slower, so the stepper code
was interleaved to separate the pin HIGH from the pin LOW. This adds
enough instructions to make it work, without needing nops.
2014-12-03 14:37:16 +01:00
nothinman
1977b4490f
Merge pull request #1159 from thinkyhead/lcd_wait_better
...
M0/M1 Message Fix
2014-11-28 16:44:29 +00:00
Scott Lahteine
7562183efc
Skip over spaces first
2014-11-28 08:09:28 -08:00
nothinman
5a8b3a84ae
Merge pull request #1155 from thinkyhead/lcd_wait_better
...
M0-M1 Enhancements
2014-11-28 11:01:24 +00:00
elgambitero
433ac29d31
Updated a bit of spanish language
2014-11-27 22:02:49 +01:00
Scott Lahteine
12b51d6060
Ignore S and P if no value >0 is included.
2014-11-26 21:05:11 -08:00
Scott Lahteine
d12b24758a
Clear LCD to welcome_msg if not printing
...
The welcome message is more appropriate than “resuming print” if
nothing is printing.
2014-11-26 21:05:11 -08:00
Scott Lahteine
3f54c9ba33
Relocate click ignore code into info screen
2014-11-26 21:05:10 -08:00
Scott Lahteine
92e21d3ee2
M0-M1 Enhancements
...
Allow M0 and M1 to include a message string. Ignore clicks on “Wait for
user” so that the Info Screen stays up.
2014-11-26 21:05:10 -08:00
Lionello Lunesu
0d35b1d0b8
Allow negative values in menus
2014-11-25 18:34:02 +08:00
Jonas
0d97dec434
Adaption of LCD info screen
...
Here comes a compile-time operation to match the extruder symbols on the
info screen to the set number of extruders in configuration.h.
When only one extruder is selected, the "1" on the symbol will not be
displayed.
2014-11-12 17:10:48 +01:00
Filip Mulier
3b1ab84536
Display Filament Sensor data on graphic LCD
...
Added support to show the filament width on the status line of the
graphic LCD. The status will show for 5 sec and then switch over to
data. Status can be seen by clicking the button.
2014-11-10 21:46:37 -06:00
Filip Mulier
d84934d8c5
Display Filament Sensor data on 20x4 LCD
...
Changes to support displaying the real-time filament width and the
volume factor on a 20x4 LCD. The data is displayed on the 4th line.
First the status message is displayed for 5 seconds, and then the
filament data is displayed. The status message can be seen by
re-selecting the info screen in the menu.
2014-11-10 21:43:58 -06:00
Filip Mulier
5c8107bcdd
Commented out FILAMENT_SENSOR #define
...
Commented out the FILAMENT_SENSOR define so that it is not enabled by
default. Code does not work on all hardware variants.
2014-11-09 13:26:02 -06:00
David
377dfb182f
Updated example configurations for Delta printers
2014-11-02 21:04:54 +00:00
Neil Darlow
b81021f475
Merge https://github.com/ErikZalm/Marlin into Marlin_v1
2014-10-21 12:06:56 +01:00
Erik van der Zalm
724197454c
Merge pull request #1104 from ch100/Marlin_v1
...
Fixed typo.
2014-10-11 23:10:00 +02:00
Erik van der Zalm
058e446531
Merge pull request #1037 from filipmu/Filament-Sensor
...
Support for a filament diameter sensor
2014-10-11 22:56:01 +02:00
Christian Inci
110c5dcf23
Fixed typo.
...
Signed-off-by: Christian Inci <chris.pcguy.inci@gmail.com>
2014-10-11 00:25:36 +02:00
Matt Stultz
ca30aee903
Fix "add_homeing" to "add_homing" to match changes
2014-10-07 00:16:27 -04:00
Erik van der Zalm
0733825fb1
Merge pull request #1099 from Fourmi/Marlin_v1
...
Update line 627 ,wrong number on thermistortables
2014-10-06 14:36:00 +02:00
Fourmi
af3e4d7510
Update line 627 ,wrong number on thermistortables
...
Wrong number on line 627 > i change number "12" by the correct number "13"
Soory
2014-10-06 14:21:44 +02:00
Erik van der Zalm
aaaf8fe8dd
Merge pull request #1068 from darkjavi/Marlin_v1
...
Added profile for RAMPS with 2 extruders and 1 fan, no heated bed
2014-10-06 13:41:38 +02:00
Erik van der Zalm
b360306881
Merge pull request #1073 from WingTangWong/wing-fix-float-delta
...
Wing fix float delta
2014-10-06 13:41:01 +02:00
Erik van der Zalm
ce85515428
Merge pull request #1082 from Fourmi/Marlin_v1
...
Add thermistor table
2014-10-06 13:39:36 +02:00
Erik van der Zalm
764921bdbf
Merge pull request #1091 from Aldert/patch-1
...
Update motion_control.cpp
2014-10-06 13:37:19 +02:00
Erik van der Zalm
c40c7b589b
Merge pull request #1095 from thinkyhead/codeclean
...
Simple code cleanup. Rename "homeing" to homing.
2014-10-06 13:36:48 +02:00
Erik van der Zalm
0f2e0525df
Merge pull request #1096 from thinkyhead/set-home
...
Proposed feature: Set Home Offsets
2014-10-06 13:36:11 +02:00
Erik van der Zalm
5ae02a361b
Merge pull request #1097 from thinkyhead/round-up-xyz
...
Adjust the Z display to hide float rounding errors
2014-10-06 13:35:00 +02:00
Matthew Schick
fb34265d75
Make hotend optional when compiling with lcd support
...
Signed-off-by: Matthew Schick <matthew.schick@gmail.com>
2014-10-06 00:19:07 -04:00
Scott Lahteine
6e343ef2f0
Adjust the Z display to hide float rounding errors
2014-10-05 18:34:54 -07:00
Scott Lahteine
2f6c57eadc
Proposed feature: Set Home Offsets
...
Add an item to the LCD menu that applies the current axis position to
the “add_homeing” offset.
2014-10-05 13:35:45 -07:00
Scott Lahteine
f989bd5435
Simple code cleanup. Rename "homeing" to homing.
2014-10-05 13:20:53 -07:00
Neil Darlow
6c5a460e65
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2014-10-05 12:54:54 +01:00
Aldert
d1e4237e1d
Update motion_control.cpp
...
G03 Full circle did not work (G02 is working correct)
2014-10-04 09:24:09 +02:00
Fourmi
a664763e6f
Update thermistortables.h
...
Add another thermistor table (13),it's a cartridge thermistor up to +300°C,use with Hotend "Simple ONE" & "All In ONE"
Thx
2014-09-27 09:05:10 +02:00
Fourmi
b5dc228a7a
Update configuration.h
...
Add another comment for thermistor 13 ,use with Hotend "Simple ONE & All In ONE"
2014-09-27 09:02:58 +02:00
Fourmi
3cbb2f56c6
Update configuration.h
...
Add another comment on configuration.h for the value of thermistor.
I make a pull request on thermistortables.h with my thermistor (12),but y see there is a comment on configuration with number 12 but it's not present on thermistortables.h ?
Thx
2014-09-26 22:01:06 +02:00
Fourmi
c35736a140
Update thermistortables.h
...
Add another thermistor table,use with hotend "Simple ONE" & "All in ONE"
2014-09-26 21:49:07 +02:00
galexander1
cb4a6dd2dc
Merge pull request #1065 from oliasmage/Marlin_v1
...
Corrected retract() call for use of auto probe without sled enabled.
2014-09-19 15:12:09 -04:00
Bracken Dawson
01e9b536cb
Fix build for non-sled bed auto levelling
...
This function should only be used with sled, not all bed auto
levelling.
2014-09-19 19:42:32 +01:00
Wing Tang Wong
58eabd21fb
Added ifndef
2014-09-16 14:31:58 -07:00
Wing Tang Wong
88d12a762a
Added #ifndef DELTA wrapper to float delta
2014-09-16 14:29:44 -07:00
alexborro
bf0ecedf60
Merge pull request #1051 from fsantini/EZ_fix935
...
Fix issue 935: error in matrix calculation
2014-09-14 21:49:15 -03:00
Javi
40ba644bb4
Added profile for RAMPS with 2 extruders and 1 fan.
...
modified: Marlin/Configuration.h
modified: Marlin/pins.h
2014-09-06 02:53:36 +02:00
Charles Bell
3b8216bdd1
Corrected #endif and ifdef for Z_PROBE_SLED code.
2014-09-04 16:40:22 -04:00
Charles Bell
37799f70ba
Corrected retract() call for use of auto probe without sled enabled.
2014-09-04 14:36:39 -04:00
Neil Darlow
1632e5e38a
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2014-09-04 12:21:35 +01:00
Filip Mulier
fe3a09bbcf
Correct analog sampling time for additional A to D sample
...
Adjusted the #define PID_dT to reflect 10 A to D sample steps, vs
original 8.
2014-09-01 06:26:19 -05:00
Gina Häußge
1e9dc85148
Do not use translations for the serial console messages
...
The serial protocol has to stay machine readable, without having
to cope with a ton of different human language variants. So
just leave it at the original english version.
Should fix ErikZalm/Marlin#1052
2014-08-29 18:02:59 +02:00
fsantini
cf325ba240
Fix issue 935: error in matrix calculation
2014-08-28 21:10:50 +02:00
Erik van der Zalm
018b68a5c4
Merge pull request #976 from cocktailyogi/SCARA_by_Yogi
...
Implemented SCARA-Maths
2014-08-28 16:32:52 +02:00
Erik van der Zalm
dde61d8886
Merge pull request #977 from OskarLinde/Marlin_v1
...
Fix lcd itostr3() to handle negative numbers
2014-08-28 16:31:53 +02:00
Erik van der Zalm
0fbfb1bf82
Merge pull request #991 from bonm014/patch-1
...
Leapfrog controller board support
2014-08-28 16:27:52 +02:00
Erik van der Zalm
8340ca6e05
Merge pull request #992 from Grogyan/patch-1
...
temperature.cpp fixes for SD card and MAX6675
2014-08-28 16:27:14 +02:00
Erik van der Zalm
9887555192
Merge pull request #998 from darconeous/pull-requests/fwretract
...
FWRETRACT fixes
2014-08-28 16:24:51 +02:00
Erik van der Zalm
105571ec68
Merge pull request #1005 from midopple/Marlin_v1
...
With option DISABLE_INACTIVE_EXTRUDER the extruder is disable to early
2014-08-28 16:24:14 +02:00
Erik van der Zalm
68dd5e635e
Merge pull request #1024 from oliasmage/Marlin_v1
...
Adding Z Probe via sled mounted endstop
2014-08-28 16:15:54 +02:00
Erik van der Zalm
25069ed4e9
Merge pull request #1031 from Roxy-3DPrintBoard/Z_PROBE_REPEATABILITY-with-correct-Defaults
...
Z probe repeatability with correct defaults
2014-08-28 16:14:10 +02:00
Filip Mulier
75b3a68b65
Revert "Change pinMode to SET_INPUT or SET_OUTPUT"
...
This reverts commit 1d0fe035f3
2014-08-16 13:26:48 -05:00
Filip Mulier
e3c88a5120
Filament sensor changes to config file
...
Update the config file for improvements and clarifying what diameter to
use in the slicer software.
2014-08-16 07:08:09 -05:00
Filip Mulier
62db9848d3
Improvements and bug fixes in sensor delay buffer for filament sensor code
...
Improvement to avoid reinitializing delay buffer with every print. Fixed
issues in buffer indexing and memory out of bounds due to floating point
imprecision. Simplified the code by avoiding conversion to standard
diameter and 1cu mm extrusion, which caused complications in determining
mm extruded.
2014-08-16 06:50:13 -05:00
Florian Baumann
5908fd5cec
Fix reseting CHDK pin to LOW
...
chdkActive was set to false regardless of (millis() - chdkHigh) being bigger than the CHDK_DELAY or not. So if (millis() - chdkHigh) wasn't bigger than the delay the first time, the CHDK would never be set back to LOW.
Also, don't return from the function, as there might be other stuff to do, after the CHDK check.
2014-08-11 14:12:32 +02:00
Roxy-3DPrintBoard
0adbc79571
Fix Default Configuration so Auto Bed Leveling is off
...
This snapshot has the Auto Bed Leveling turned off because most Marlin
users do not have that feature.
2014-08-10 10:18:54 -05:00
Roxy-3DPrintBoard
0091865583
Z_PROBE_REPEATABILITY test
...
Z_PROBE_REPEATABILITY test for Auto Bed Leveling.
Implemented as M48 with extra user specified options.
Full support at
http://3dprintboard.com/showthread.php?2802-Auto_Bed_Leveling-Z-Probe-Repeatability-code
2014-08-09 15:37:23 -05:00
Filip Mulier
85649a4549
Real-time filament diameter measurement and control
...
This feature allows the printer to read the filament diameter
automatically and adjust the printer in real time. Added code to read
an analog voltage that represents a filament diameter measurement. This
measurement is delayed in a ring buffer to compensate for sensors that
are a distance away from the extruder. The measurement is used to
adjust the volumetric_multiplier for the extruder. Some additional g
codes (M404, M405, M406, M407) are used to set parameters and turn
on/off the control. g code M221 is updated. Pins for RAMPS1.4, RAMBO,
and Printrboard are identified for analog input. The configuration file
is updated with relevant user parameters.
2014-08-06 19:30:57 -05:00
Filip Mulier
1d0fe035f3
Change pinMode to SET_INPUT or SET_OUTPUT
...
Original code is using WRITE from fastio, but original used pinMode to
set pin direction and did not use the fastio SET_INPUT or SET_OUTPUT.
This caused an issue with the rotary encoder interface to boards based
on teensyduino, since for teensyduino pin numbers for fastio and the
usual Arduino IO are different.
2014-08-04 21:44:04 -05:00
Charles Bell
e7707aedbc
Commented out new #defines in Configuration.h.
2014-08-04 10:18:25 -04:00
Charles Bell
0a8dc0e96b
Added documentation to the README.md for the sled Z probe option. CAB
2014-08-04 10:07:43 -04:00
Charles Bell
d2fcb3ee56
CAB: Added code for Z-probe with Z endstop mounted on a sled.
2014-08-01 11:29:59 -04:00
Neil Darlow
3cd7dbcc45
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2014-07-30 13:01:52 +01:00
daid
c13a831ea1
Merge pull request #1017 from foosel/fix/checksum_truncation_bug
...
Fix for a wrong checksum truncation for certain commands
2014-07-24 19:41:34 +02:00
Gina Häußge
2d22902d08
Fix for a wrong checksum truncation for certain commands
...
Positioning of string terminator to truncate checksum from the commands
M23, M28, M30, M32, M928 and M117 was off by one, causing the last
letter of the actual command to be truncated instead of just the
checksum.
In case of the SD commands this caused checksummed commands targeting
existing files to fail since the last letter of the filename was
truncated.
In case of M117 this caused the last given letter not to be displayed.
This patch fixes the off-by-one error and sets the null terminator
on the exact position of the * starting the checksum instead of the
character before that.
2014-07-24 12:04:02 +02:00
cocktailyogi
ad3b770c1a
updated examples
2014-07-20 13:55:13 +02:00
cocktailyogi
2f4a20257c
imported last Marlin changes
2014-07-20 13:49:26 +02:00
daid
aacff0d361
Merge pull request #948 from Dim3nsioneer/Marlin_v1
...
Implementation of FW extruder change retract
2014-07-18 16:10:15 +02:00
midopple
17aa67e4ea
If the option DISABLE_INACTIVE_EXTRUDER ist active the extruder switch to early to inactive because there are some moves in the buffer. So the planner wait 32 moves to disable the unused extruder.
2014-07-13 21:52:32 +02:00
Robert Quattlebaum
1fd9a7d476
Fix for FWRETRACT on DELTA printers.
...
Fixes #817
2014-07-09 09:24:26 -07:00
Neil Darlow
3f2c771d90
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2014-07-07 18:17:15 +01:00
Grogyan
bcd039aa81
Update pins.h
2014-07-05 17:55:03 +12:00
Grogyan
82606354dd
Update temperature.cpp
...
Enables both SD card and MAX6675 to talk with each other
Fixes also issue #750
2014-07-05 17:17:17 +12:00
bonm014
32a6451ad8
Add leapfrog and dual Y/Z
...
I have added the pin set for the leapfrog and the support of dual Y and Z
2014-07-03 21:15:03 +02:00
bonm014
b5417be109
Update Configuration.h
...
Leapfrog added to the board list
2014-07-03 21:03:22 +02:00
bonm014
f244045245
Update pins.h
...
Leapfrog board added to the pin list
2014-07-03 21:01:41 +02:00
Pablo Clemente
2242a84218
Changed the declaration of the variable to Marlin_main.cpp to fix issue on commit #965
2014-07-01 16:45:03 +02:00
Neil Darlow
6e3406d228
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2014-07-01 10:27:39 +01:00
alexborro
43c298a7a9
Add "Thermal Runaway Protection" feature
...
This is a feature to protect your printer from burn up in flames if it
has a thermistor coming off place (this happened to a friend of mine
recently and motivated me writing this feature).
The issue: If a thermistor come off, it will read a lower temperature
than actual. The system will turn the heater on forever, burning up the
filament and anything
else around.
After the temperature reaches the target for the first time, this
feature will start measuring for how long the current temperature stays
below the target minus _HYSTERESIS (set_temperature -
THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).
If it stays longer than _PERIOD, it means the thermistor temperature
cannot catch up with the target, so something *may be* wrong. Then, to
be on the safe side, the system will he halt.
Bear in mind the count down will just start AFTER the first time the
thermistor temperature is over the target, so you will have no problem
if your extruder heater takes 2 minutes to hit the target on heating.
2014-06-30 15:22:49 -03:00
Pablo Clemente
d86c3cf43c
Changed the type of variable to bool, the name to "cancel_heatup", flags implementation and added this fix to M190 gcode too.
2014-06-30 15:12:13 +02:00
cocktailyogi
f0cab611db
optimised some math-code
2014-06-24 18:43:36 +02:00
Oskar Linde
269a068032
Fix lcd itostr3() to handle negative numbers
2014-06-24 14:31:15 +02:00
cocktailyogi
fae7d08698
fixed wrong compiler-option
2014-06-23 18:16:42 +02:00
cocktailyogi
512f2a3136
restore Branch from Backup
...
sorry for that
2014-06-23 17:09:57 +02:00
Pablo Clemente
cd3220d055
Inverted state logic for forced_heating_stop variable
2014-06-13 08:39:58 +02:00
Pablo Clemente
86b4b805d2
Fixed stop print LCD function on M104
2014-06-12 18:43:16 +02:00
Greg Tan
6e6e4e2143
Added thermistor table for the 500C thermistor shipped with the Pico hot end.
2014-06-08 09:35:04 +08:00
Neil Darlow
9d11b70436
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2014-06-07 20:48:25 +01:00
Gina Häußge
0de826160e
M30 response is missing linefeed, "ok" therefore not on own line
...
This leads to the command not being acknowledged properly
by the firmware, leading to consecutive issues in host software
waiting for an acknowledgement.
2014-06-02 17:11:32 +02:00
Dim3nsioneer
3c927901a4
Implementation of FW extruder change retract
...
FW retraction is extended onto swap retraction invoked by 'G10 S1'.
Bookkeeping of the retract state of all extruders allows for having one
extruder fw standard retracted while another extruder is swap retracted.
An LCD menu item for the swap retract and recover length was added.
2014-06-02 17:02:10 +02:00
Dim3nsioneer
8a32c5395b
renaming the disable inactive extruder feature
2014-06-02 14:07:02 +02:00
Dim3nsioneer
29e7639933
Add switch unused feeder(s) off
...
Having the non-active feeder motors powered on all the time is not
necessary. A feature to deactivate the unused feeder motors has been
implemented. The feature is enabled on default but can be switched off
in the configuration.
2014-06-02 08:13:09 +02:00
Justin Nesselrotte
07c0eeee99
Fixed a comment in the planner
2014-06-01 19:04:41 -05:00
David Forrest
09b84faa00
Configuration.h, pins.h: Add MOTHERBOARD 84 for Teensy++2.0
2014-05-29 17:19:16 -04:00
neildarlow
efb6d61413
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2014-05-24 13:08:58 +01:00
nothinman
38192cb5f3
Add M112 description to Marlin_main
2014-05-20 15:20:19 +01:00
nothinman
aed5ec008a
Merge pull request #851 from DanNixon/estop
...
Implemented M112
2014-05-19 17:55:34 +01:00
Erik van der Zalm
cfb98ef682
More coverity fixes
2014-05-15 22:09:50 +02:00
zaubara
92e14298b0
Fixes typo for lcd backlighting on I2C PCF8575
...
When using LCD_I2C_TYPE_PCF8575T (like Sainsmart I2C), the backlight
won't come on; the incorrect ifdef blocks the evocation of the backlight
functions.
2014-05-15 01:37:23 +02:00
Erik van der Zalm
9db9842aea
Fixed error found by the free coverity tool ( https://scan.coverity.com/ )
...
===================================================
Hi,
Please find the latest report on new defect(s) introduced to ErikZalm/Marlin found with Coverity Scan.
Defect(s) Reported-by: Coverity Scan
Showing 15 of 15 defect(s)
** CID 59629: Unchecked return value (CHECKED_RETURN)
/Marlin_main.cpp: 2154 in process_commands()()
** CID 59630: Operands don't affect result (CONSTANT_EXPRESSION_RESULT)
/Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Tone.cpp: 319 in tone(unsigned char, unsigned int, unsigned long)()
** CID 59631: Missing break in switch (MISSING_BREAK)
/Marlin_main.cpp: 1187 in process_commands()()
** CID 59632: Missing break in switch (MISSING_BREAK)
/Marlin_main.cpp: 1193 in process_commands()()
** CID 59633: Out-of-bounds write (OVERRUN)
/temperature.cpp: 914 in disable_heater()()
** CID 59634: Out-of-bounds write (OVERRUN)
/temperature.cpp: 913 in disable_heater()()
** CID 59635: Out-of-bounds read (OVERRUN)
/temperature.cpp: 626 in analog2temp(int, unsigned char)()
** CID 59636: Out-of-bounds read (OVERRUN)
/temperature.cpp: 620 in analog2temp(int, unsigned char)()
** CID 59637: Out-of-bounds write (OVERRUN)
/temperature.cpp: 202 in PID_autotune(float, int, int)()
** CID 59638: Out-of-bounds read (OVERRUN)
/temperature.cpp: 214 in PID_autotune(float, int, int)()
** CID 59639: Out-of-bounds write (OVERRUN)
/Marlin_main.cpp: 2278 in process_commands()()
** CID 59640: Out-of-bounds read (OVERRUN)
/Marlin_main.cpp: 1802 in process_commands()()
** CID 59641: Uninitialized scalar field (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 51 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()
** CID 59642: Uninitialized scalar field (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 45 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()
** CID 59643: Uninitialized scalar field (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 32 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()
________________________________________________________________________________________________________
*** CID 59629: Unchecked return value (CHECKED_RETURN)
/Marlin_main.cpp: 2154 in process_commands()()
2148 }
2149 #endif
2150 }
2151 }
2152 break;
2153 case 85: // M85
CID 59629: Unchecked return value (CHECKED_RETURN)
Calling "code_seen" without checking return value (as is done elsewhere 66 out of 67 times).
2154 code_seen('S');
2155 max_inactive_time = code_value() * 1000;
2156 break;
2157 case 92: // M92
2158 for(int8_t i=0; i < NUM_AXIS; i++)
2159 {
________________________________________________________________________________________________________
*** CID 59630: Operands don't affect result (CONSTANT_EXPRESSION_RESULT)
/Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Tone.cpp: 319 in tone(unsigned char, unsigned int, unsigned long)()
313 else
314 {
315 // two choices for the 16 bit timers: ck/1 or ck/64
316 ocr = F_CPU / frequency / 2 - 1;
317
318 prescalarbits = 0b001;
CID 59630: Operands don't affect result (CONSTANT_EXPRESSION_RESULT)
"ocr > 65535U" is always false regardless of the values of its operands. This occurs as the logical operand of if.
319 if (ocr > 0xffff)
320 {
321 ocr = F_CPU / frequency / 2 / 64 - 1;
322 prescalarbits = 0b011;
323 }
324
________________________________________________________________________________________________________
*** CID 59631: Missing break in switch (MISSING_BREAK)
/Marlin_main.cpp: 1187 in process_commands()()
1181 case 2: // G2 - CW ARC
1182 if(Stopped == false) {
1183 get_arc_coordinates();
1184 prepare_arc_move(true);
1185 return;
1186 }
CID 59631: Missing break in switch (MISSING_BREAK)
The above case falls through to this one.
1187 case 3: // G3 - CCW ARC
1188 if(Stopped == false) {
1189 get_arc_coordinates();
1190 prepare_arc_move(false);
1191 return;
1192 }
________________________________________________________________________________________________________
*** CID 59632: Missing break in switch (MISSING_BREAK)
/Marlin_main.cpp: 1193 in process_commands()()
1187 case 3: // G3 - CCW ARC
1188 if(Stopped == false) {
1189 get_arc_coordinates();
1190 prepare_arc_move(false);
1191 return;
1192 }
CID 59632: Missing break in switch (MISSING_BREAK)
The above case falls through to this one.
1193 case 4: // G4 dwell
1194 LCD_MESSAGEPGM(MSG_DWELL);
1195 codenum = 0;
1196 if(code_seen('P')) codenum = code_value(); // milliseconds to wait
1197 if(code_seen('S')) codenum = code_value() * 1000; // seconds to wait
1198
________________________________________________________________________________________________________
*** CID 59633: Out-of-bounds write (OVERRUN)
/temperature.cpp: 914 in disable_heater()()
908 WRITE(HEATER_0_PIN,LOW);
909 #endif
910 #endif
911
912 #if defined(TEMP_1_PIN) && TEMP_1_PIN > -1
913 target_temperature[1]=0;
CID 59633: Out-of-bounds write (OVERRUN)
Overrunning array "soft_pwm" of 1 bytes at byte offset 1 using index "1".
914 soft_pwm[1]=0;
915 #if defined(HEATER_1_PIN) && HEATER_1_PIN > -1
916 WRITE(HEATER_1_PIN,LOW);
917 #endif
918 #endif
919
________________________________________________________________________________________________________
*** CID 59634: Out-of-bounds write (OVERRUN)
/temperature.cpp: 913 in disable_heater()()
907 #if defined(HEATER_0_PIN) && HEATER_0_PIN > -1
908 WRITE(HEATER_0_PIN,LOW);
909 #endif
910 #endif
911
912 #if defined(TEMP_1_PIN) && TEMP_1_PIN > -1
CID 59634: Out-of-bounds write (OVERRUN)
Overrunning array "target_temperature" of 1 2-byte elements at element index 1 (byte offset 2) using index "1".
913 target_temperature[1]=0;
914 soft_pwm[1]=0;
915 #if defined(HEATER_1_PIN) && HEATER_1_PIN > -1
916 WRITE(HEATER_1_PIN,LOW);
917 #endif
918 #endif
________________________________________________________________________________________________________
*** CID 59635: Out-of-bounds read (OVERRUN)
/temperature.cpp: 626 in analog2temp(int, unsigned char)()
620 if(heater_ttbl_map[e] != NULL)
621 {
622 float celsius = 0;
623 uint8_t i;
624 short (*tt)[][2] = (short (*)[][2])(heater_ttbl_map[e]);
625
CID 59635: Out-of-bounds read (OVERRUN)
Overrunning array "heater_ttbllen_map" of 1 bytes at byte offset 1 using index "e" (which evaluates to 1).
626 for (i=1; i<heater_ttbllen_map[e]; i++)
627 {
628 if (PGM_RD_W((*tt)[i][0]) > raw)
629 {
630 celsius = PGM_RD_W((*tt)[i-1][1]) +
631 (raw - PGM_RD_W((*tt)[i-1][0])) *
________________________________________________________________________________________________________
*** CID 59636: Out-of-bounds read (OVERRUN)
/temperature.cpp: 620 in analog2temp(int, unsigned char)()
614 if (e == 0)
615 {
616 return 0.25 * raw;
617 }
618 #endif
619
CID 59636: Out-of-bounds read (OVERRUN)
Overrunning array "heater_ttbl_map" of 1 2-byte elements at element index 1 (byte offset 2) using index "e" (which evaluates to 1).
620 if(heater_ttbl_map[e] != NULL)
621 {
622 float celsius = 0;
623 uint8_t i;
624 short (*tt)[][2] = (short (*)[][2])(heater_ttbl_map[e]);
625
________________________________________________________________________________________________________
*** CID 59637: Out-of-bounds write (OVERRUN)
/temperature.cpp: 202 in PID_autotune(float, int, int)()
196 {
197 soft_pwm_bed = (MAX_BED_POWER)/2;
198 bias = d = (MAX_BED_POWER)/2;
199 }
200 else
201 {
CID 59637: Out-of-bounds write (OVERRUN)
Overrunning array "soft_pwm" of 1 bytes at byte offset 1 using index "extruder" (which evaluates to 1).
202 soft_pwm[extruder] = (PID_MAX)/2;
203 bias = d = (PID_MAX)/2;
204 }
205
206
207
________________________________________________________________________________________________________
*** CID 59638: Out-of-bounds read (OVERRUN)
/temperature.cpp: 214 in PID_autotune(float, int, int)()
208
209 for(;;) {
210
211 if(temp_meas_ready == true) { // temp sample ready
212 updateTemperaturesFromRawValues();
213
CID 59638: Out-of-bounds read (OVERRUN)
Overrunning array "current_temperature" of 1 4-byte elements at element index 1 (byte offset 4) using index "extruder" (which evaluates to 1).
214 input = (extruder<0)?current_temperature_bed:current_temperature[extruder];
215
216 max=max(max,input);
217 min=min(min,input);
218 if(heating == true && input > temp) {
219 if(millis() - t2 > 5000) {
________________________________________________________________________________________________________
*** CID 59639: Out-of-bounds write (OVERRUN)
/Marlin_main.cpp: 2278 in process_commands()()
2272 tmp_extruder = code_value();
2273 if(tmp_extruder >= EXTRUDERS) {
2274 SERIAL_ECHO_START;
2275 SERIAL_ECHO(MSG_M200_INVALID_EXTRUDER);
2276 }
2277 }
CID 59639: Out-of-bounds write (OVERRUN)
Overrunning array "volumetric_multiplier" of 1 4-byte elements at element index 1 (byte offset 4) using index "tmp_extruder" (which evaluates to 1).
2278 volumetric_multiplier[tmp_extruder] = 1 / area;
2279 }
2280 break;
2281 case 201: // M201
2282 for(int8_t i=0; i < NUM_AXIS; i++)
2283 {
________________________________________________________________________________________________________
*** CID 59640: Out-of-bounds read (OVERRUN)
/Marlin_main.cpp: 1802 in process_commands()()
1796 int pin_status = code_value();
1797 int pin_number = LED_PIN;
1798 if (code_seen('P') && pin_status >= 0 && pin_status <= 255)
1799 pin_number = code_value();
1800 for(int8_t i = 0; i < (int8_t)sizeof(sensitive_pins); i++)
1801 {
CID 59640: Out-of-bounds read (OVERRUN)
Overrunning array "sensitive_pins" of 28 2-byte elements at element index 55 (byte offset 110) using index "i" (which evaluates to 55).
1802 if (sensitive_pins[i] == pin_number)
1803 {
1804 pin_number = -1;
1805 break;
1806 }
1807 }
________________________________________________________________________________________________________
*** CID 59641: Uninitialized scalar field (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 51 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()
45 }
46
47 LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t enable,
48 uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3)
49 {
50 init(1, rs, 255, enable, d0, d1, d2, d3, 0, 0, 0, 0);
CID 59641: Uninitialized scalar field (UNINIT_CTOR)
Non-static class member "_initialized" is not initialized in this constructor nor in any functions that it calls.
51 }
52
53 void LiquidCrystal::init(uint8_t fourbitmode, uint8_t rs, uint8_t rw, uint8_t enable,
54 uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
55 uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
56 {
________________________________________________________________________________________________________
*** CID 59642: Uninitialized scalar field (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 45 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()
39 }
40
41 LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable,
42 uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3)
43 {
44 init(1, rs, rw, enable, d0, d1, d2, d3, 0, 0, 0, 0);
CID 59642: Uninitialized scalar field (UNINIT_CTOR)
Non-static class member "_initialized" is not initialized in this constructor nor in any functions that it calls.
45 }
46
47 LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t enable,
48 uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3)
49 {
50 init(1, rs, 255, enable, d0, d1, d2, d3, 0, 0, 0, 0);
________________________________________________________________________________________________________
*** CID 59643: Uninitialized scalar field (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 32 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()
26
27 LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable,
28 uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
29 uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
30 {
31 init(0, rs, rw, enable, d0, d1, d2, d3, d4, d5, d6, d7);
CID 59643: Uninitialized scalar field (UNINIT_CTOR)
Non-static class member "_initialized" is not initialized in this constructor nor in any functions that it calls.
32 }
33
34 LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t enable,
35 uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
36 uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
37 {
________________________________________________________________________________________________________
To view the defects in Coverity Scan visit, http://scan.coverity.com/projects/2224?tab=overview
2014-05-14 21:59:48 +02:00
Neil Darlow
e541323741
Merge https://github.com/ErikZalm/Marlin into Marlin_v1
2014-05-09 15:02:50 +01:00
Alejandro Romero
1c9a70cee9
Support for Gen3 Monolithic electronics
...
Techzone Monotronics support, ignoring the tip manager and using fan connector as on Sprinter FW
TODO: Add support for tipmanager
2014-05-06 19:24:20 -05:00
daid
2acd3792fc
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2014-05-01 12:03:47 +02:00
daid
8b4c4aa5c3
Add feature to check&retry CRC read errors on SD.
2014-05-01 12:03:41 +02:00
nothinman
ce76843dc3
Merge pull request #897 from Makible/5DPrint_D8_Board_Support
...
5DPrint D8 Controller Board Support
2014-04-28 22:11:28 +01:00
Cameron Lai
ad5c8cbba9
Add safety limit for hot bed power in example configuration
2014-04-25 17:04:24 +08:00
Cameron Lai
6460709d92
Fix bug in PID Autotune report
2014-04-25 16:05:05 +08:00
Cameron Lai
105bebb466
Fix for pin mapping for SDSS pin and Fan pin, so Arduino library can be used
2014-04-25 12:57:47 +08:00
Cameron Lai
97ead2eccb
Fix for microstepping pin mapping, not using Teensy pin mapping, but Arduino's default pin mapping so Arduino library can be used
2014-04-25 12:57:11 +08:00
Cameron Lai
d85411f13a
Revert "Fix for stepper microstepping"
...
This reverts commit eea3ba5588
2014-04-25 12:41:56 +08:00
Cameron Lai
7c7f2d094e
Revert "Fix for reading microstepping resolution"
...
This reverts commit 2715f6ddbf
2014-04-25 12:41:48 +08:00
Cameron Lai
e2d703377a
Enable EEPROM by default for 5DPrint D8 Controller Board in example configuration
2014-04-24 19:15:35 +08:00
Cameron Lai
2715f6ddbf
Fix for reading microstepping resolution
2014-04-24 17:48:33 +08:00
Cameron Lai
39e9b133f3
Add example configuration for Makibox printer, which uses the 5DPrint D8 Driver Board
2014-04-24 17:06:07 +08:00
Cameron Lai
da6b536182
Add 5DPrint D8 Driver Board info and temperature table for Makibox hot bed
2014-04-24 16:49:42 +08:00
Cameron Lai
3a8e36f19e
Add Digipot config for 5DPrint D8 Driver Board
2014-04-24 12:56:46 +08:00
Cameron Lai
eea3ba5588
Fix for stepper microstepping
2014-04-24 12:56:06 +08:00
Cameron Lai
1cbcbb0971
Add makibox machine information
2014-04-24 12:55:21 +08:00
Cameron Lai
2fa514e88a
Add port for 5DPrint D8 Driver board
2014-04-24 12:55:00 +08:00
nothinman
b9126ab497
Merge pull request #894 from MyMakibox/Marlin_v1
...
Update Marlin_main.cpp
2014-04-23 16:23:56 +01:00
MyMakibox
21ec6b88c3
Update Marlin_main.cpp
...
Added description of autotemp flags to M109
2014-04-23 17:33:26 +08:00
MyMakibox
e4dc80d3d3
Update Configuration_adv.h
...
Corrected error in AUTOTEMP instructions
2014-04-23 17:30:07 +08:00
Neil Darlow
6adbdf42e0
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2014-04-21 15:10:57 +01:00
whosawhatsis
27d544ac25
Speed up QUICK_HOME feedrate for diagonal move
...
Speed up the diagonal move while still keeping each individual axis at
or below its homing feedrate.
2014-04-19 17:29:20 -07:00
nothinman
013793bbe9
Merge pull request #878 from koldoartola/Marlin_v1
...
Added new language (Basque-Euskera)
2014-04-13 22:37:39 +01:00
koldo artola
e5b70237c7
Added new language (Basque-Euskera)
...
Added:
* new language (Basque-Euskera)
* some minor corrections for Spanish
* added 2 new constants for every language (required for a minor change
I am preparing to ultralcd.cpp)
2014-04-13 22:19:38 +02:00
Nutz95
ed6f4a71c5
fix wrong temptable index
2014-04-13 18:00:55 +02:00
Nutz95
3161740df9
This table is made for thermistor 3950 (can be found on ebay for cheap)
...
it's caracteristics are :
R25℃ ;100KΩ±1%
B Value(R25/50℃)：3990K 1%
Dissipation Factor(mW/℃)：1.1~1.6 In still Air
Thermal Time Constant(S)：10~17 In Still Air
Operating temperature range： (-50~+260°C)
Dimension： 1.8mm Dia X4.1mm
Lead Length ：30mm
This table was found on the following blogs:
http://cae2100.wordpress.com/2014/03/08/beta3950-thermistor-table-for-marlin/
and
http://microfabricator.com/articles/view/id/531ad7e59aad9d3131000000/beta-3950-thermistor-table-for-marlin
2014-04-13 17:03:20 +02:00
nothinman
086ff1644f
Merge pull request #852 from pixatintes/patch-1
...
Update language.h
2014-04-13 00:46:17 +01:00
nothinman
3ffc9651b1
Merge pull request #845 from DerSchultze/Sanguinololu-servo
...
Added servo pin assignments to Sanguinololu
2014-04-13 00:37:28 +01:00
nothinman
357b87b498
Merge pull request #826 from paciotti/patch-1
...
Configuration_adv.h
2014-04-13 00:22:25 +01:00
neildarlow
95ad6ec9a1
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2014-04-12 22:20:45 +01:00
Gabe Rosenhouse
27a7cf9fcf
use existing strings
2014-04-07 05:01:48 -05:00
Gabe Rosenhouse
d3f305332a
Allowable range now includes default value
2014-04-06 19:45:56 -05:00
Gabe Rosenhouse
b0aeac117f
Adjustable Z probe offset, via custom M-code
2014-04-06 19:45:56 -05:00
Neil Darlow
73b380d8d2
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2014-04-06 19:15:29 +01:00
nothinman
c23376f2e7
Merge pull request #837 from whosawhatsis/fwretract
...
FWRETRACT in mm/s
2014-04-04 11:47:58 +01:00
nothinman
dfb98101e4
Change CONTROLLERFAN_PIN for board 35 to -1, as it would conflict with board's 33 extruder pin, causing burnout (it's the same board, just different number of fans/extruders, therefore should be pin-compatible)
2014-04-03 18:05:48 +01:00
nothinman
f1501317ca
Merge pull request #860 from drf5n/therm3950
...
thermistortables.h: Add comments that table 60 uses beta=3950.
2014-04-02 18:29:57 +01:00
nothinman
9a5d23d96f
Merge pull request #866 from sakunamary/Marlin_v1
...
fix bug for dual extruders not working
2014-04-02 18:27:42 +01:00
nothinman
303ee67896
Merge pull request #864 from whosawhatsis/M200
...
fix bug in M200 with multiple extruders
2014-04-02 18:26:15 +01:00
Tim
8759508319
fix bug for dual extruders not working
...
some guy find that marlin not working good for dual extruders delta .
when type T0 or T1 to active extruder and E0 or E1 move causing XYZ
motion . so i locales the bugs and fix it , I have dry run the fix.
2014-04-01 09:26:19 +08:00
whosawhatsis
a65564eef6
fix bug in M200 with multiple extruders
2014-03-30 11:42:22 -07:00
whosawhatsis
aeaf9b9312
fix bug in M200 with multiple extruders
2014-03-30 11:41:57 -07:00
Neil Darlow
89f78b0b80
Allow use of either SD Card slot when LCD Panel is configured.
...
Preference is for Controller SD slot before LCD Panel slot when both are occupied.
2014-03-27 17:02:17 +00:00
David Forrest
b0093a1513
thermistortables.h: Add comments that table 60 uses beta=3950.
2014-03-26 23:41:10 -04:00
pixatintes
a3530d1141
Update language.h
...
Updated to latest version.
2014-03-23 18:06:48 +01:00
pixatintes
990e770e15
Update language.h
...
Added catalan language
2014-03-23 10:30:08 +01:00
Dan Nixon
f643f4d674
Test and refactor
2014-03-21 20:42:00 +00:00
neildarlow
bbe8fbe13d
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2014-03-21 18:27:14 +00:00
Dim3nsioneer
c8cdd1fc6f
Bugfixes for language option 6 (russian)
2014-03-19 14:27:38 +01:00
Dim3nsioneer
7395dafc1e
semantic changes in language.h
2014-03-19 12:30:50 +01:00
Dim3nsioneer
fad2a60ce6
Corrections for preheat extension in language.h
2014-03-19 12:23:35 +01:00
Ralf Schultz
eecda434fb
Sanguinololu servo pins set default disabled
2014-03-18 08:25:20 +01:00
Dim3nsioneer
944ced87c5
Extended Preheat options
...
Preheat LCD menus base on code by D-Base
2014-03-17 18:37:46 +01:00
Ralf Schultz
06709ad60e
Added servo pin assignments to Sanguinololu
2014-03-17 15:45:13 +01:00
Dim3nsioneer
3906f27c46
Individual extruder flow rate
...
Extension of M221, Tune menu
2014-03-15 18:09:46 +01:00
Dan Nixon
a38c90ee84
Added estop handling
2014-03-15 15:56:15 +00:00
ErikZalm
a00cec8b71
Merge pull request #833 from mattsch/optional_feedrate_multiplier
...
Add support for disabling encoder control for feedrate multiplier
2014-03-15 15:41:45 +01:00
neildarlow
af8be9013b
Merge branch 'lcd_detected' of https://github.com/whosawhatsis/Marlin into Marlin_v1
2014-03-15 07:24:47 +00:00
whosawhatsis
0ddee3c7db
Prevent SD card insertion from causing a hang when using LiquidTWI2 device detection
2014-03-14 18:46:25 -07:00
Dan Nixon
272072fa20
Added M112
2014-03-14 23:19:43 +00:00
whosawhatsis
aab61e63c3
FWRETRACT in mm/s
...
Firmware retraction now stores the retract and recover speeds in mm/s
instead of mm/min. This makes it match the units of the maximum
feedrate, and fixes problems with modifying the value via LCD control
panel. From gcode, the values are still taken in mm/min to match the
units of G1 and similar, and they are converted to mm/s before they are
stored.
I also lowered the default retract feedrate to make it less likely to
cause problems for geared extruders when the user hasn’t bothered to
set a reasonable maximum feedrate, though users should be setting both
of these values to suit their hardware.
2014-03-14 15:17:28 -07:00
Matthew Schick
6cd85e6008
Add support for disabling encoder control for feedrate multiplier
...
Signed-off-by: Matthew Schick <matthew.schick@gmail.com>
2014-03-12 18:13:50 -04:00
blddk
09af1b90b8
Added CHDK support
...
Added CHDK support to take pictures instead of doing an IR command, see more about how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
2014-03-10 21:57:08 +01:00
blddk
765b2da3d4
Added CHDK support
...
Added so M240 can be used to trigger CHDK instead of sending an IR signal, see more about CHDK here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
2014-03-10 21:52:33 +01:00
paciotti
881e348eed
Update Configuration_adv.h
...
Increase Z_HOME_RETRACT_MM to 2mm default to avoid end stop not switching during retract.
2014-03-08 22:35:05 +01:00
neildarlow
5a332df47e
Merge https://github.com/ErikZalm/Marlin into Marlin_v1
2014-03-06 20:56:44 +00:00
Tommi Lamberg
15d1b8d719
Fixed finnish translation
...
- Fixed Few finnish transalations
- Removed duplicate contrast define
2014-03-05 14:02:52 +02:00
neildarlow
7325d7102e
Activate LiquidTWI2 device detection and space-pad LCD status line.
2014-03-03 21:01:27 +00:00
ErikZalm
7f76a0e064
Merge pull request #813 from drf5n/PID_DEBUG
...
temperature.cpp: Fix PID_DEBUG compile error.
2014-02-26 17:31:48 +01:00
Erik van der Zalm
fcd8524b6e
Only increase EEPROM version for DELTA printers.
2014-02-26 17:29:27 +01:00
Jim Morris
8ea5665ee2
Merge remote-tracking branch 'origin/Marlin_v1' into add/M665-set-delta-configuration
...
Conflicts:
Marlin/Marlin_main.cpp
2014-02-26 00:19:28 -08:00
David Forrest
8c4377dd63
temperature.cpp: Fix PID_DEBUG compile error.
2014-02-26 00:44:22 -05:00
ErikZalm
fde8c2c310
Merge pull request #807 from Cylindric3D/typofixes_upstream5
...
Various typo fixes #5 - only in comments, no code changes.
2014-02-25 18:49:41 +01:00
Cylindric
fdce91192e
Various typo fixes - only in comments, no code changes.
2014-02-25 10:01:15 +00:00
Cylindric
d819c55395
Various typo fixes - only in comments, no code changes.
2014-02-25 09:52:58 +00:00
ErikZalm
fd4542f33a
Merge pull request #805 from whosawhatsis/M200
...
autretract fix
2014-02-24 22:35:08 +01:00
ErikZalm
e8291ed728
Merge pull request #802 from Makers-Tool-Works/Marlin_v1
...
Clarify which PID values to enter
2014-02-24 22:31:13 +01:00
ErikZalm
465b654d24
Merge pull request #797 from Cylindric3D/update_menu_plan
...
Update menu plan
2014-02-24 22:30:19 +01:00
ErikZalm
88506a80c3
Merge pull request #789 from smiler/Marlin_v1
...
Fixed typo.
2014-02-24 22:26:31 +01:00
ErikZalm
b514d3c87f
Merge pull request #781 from Cylindric3D/typofixes_upstream
...
Various typo fixes #3 - only in comments, no code changes.
2014-02-24 22:25:38 +01:00
whosawhatsis
77df0d689a
autretract fix
...
I made these changes previously, but I can’t find the commit now. This
reapplies the changes to get auto retract working again.
Conflicts:
Marlin/Configuration_adv.h
Marlin/Marlin_main.cpp
2014-02-24 13:24:38 -08:00
ErikZalm
cc5f1d475c
Merge pull request #772 from ellensp/Marlin_v1
...
Updated gen3+ board pins names to current convention
2014-02-24 22:22:15 +01:00
Cylindric
91759dede6
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into typofixes_upstream
2014-02-24 17:29:37 +00:00
Cylindric
557217fc05
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into update_menu_plan
2014-02-24 17:29:24 +00:00
RoyOnWheels
aee63afccd
Clarify which PID values to enter
...
Users can be confused as to which values to enter after a PID tune. Updating the message to help clarity it.
New message: "PID Autotune finished! Put the last Kp, Ki and Kd constants from above into Configuration.h"
Old message: "PID Autotune finished! Put the Kp, Ki and Kd constants into Configuration.h"
2014-02-23 14:36:50 -08:00
Gabe Rosenhouse
99f6326544
Remove unnecessary dependency on time.h from qr_solve.cpp
...
Fixed compiler errors on Ubuntu using arduino-core
2014-02-20 16:43:37 -08:00
Cylindric
ea669cb504
Fix some extra and some missing tabs, to make the file consistent.
2014-02-20 14:28:29 +00:00
Cylindric
b46a1b6360
Update the menu plan document with the current menu as per ultralcd.cpp.
2014-02-20 14:20:27 +00:00
Cylindric
3cc7626d1f
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into update_menu_plan
2014-02-20 14:12:10 +00:00
Gabe Rosenhouse
174b8d99d5
Simplify 3-point probing using new code only
2014-02-19 21:48:05 -08:00
Gabe Rosenhouse
3b718b816c
better documentation
2014-02-19 14:04:37 -08:00
Gabe Rosenhouse
34fd59c370
ABL at any points
2014-02-19 13:18:21 -08:00
Cylindric
541155ea87
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into typofixes_upstream
2014-02-19 15:52:18 +00:00
alexborro
9fa328e5c8
Merge pull request #793 from MissionSt/use_axis_enums
...
Use constants instead of numeric literals
2014-02-19 10:15:57 -03:00
Gabe Rosenhouse
f308a8af91
update comment
2014-02-19 01:06:24 -08:00
Gabe Rosenhouse
357e31270a
Prevent G29 without first homing in X and Y
...
If position is unknown, then G29 can be dangerous.
2014-02-19 00:51:43 -08:00
Gabe Rosenhouse
d2d7d186b5
Use descriptive constants, more
2014-02-19 00:10:17 -08:00
Gabe Rosenhouse
2ccdf4f36d
Use descriptive constants instead of numeric literals
2014-02-19 00:02:59 -08:00
Christian Axelsson
c00383f286
Fixed typo.
2014-02-18 18:50:12 +01:00
Cylindric
60f72a78a9
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into typofixes_upstream
2014-02-18 17:31:58 +00:00
nothinman
abba7a0003
Merge pull request #782 from marcovannoord/Marlin_v1
...
Added dutch to language.h
2014-02-18 16:19:50 +00:00
Cylindric
b868d668fa
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into typofixes_upstream
2014-02-18 12:11:01 +00:00
Marco
8212d8d543
Revert "Fixed small typo that would prevent compiling"
...
This reverts commit 51ae4881ab
2014-02-18 10:40:25 +01:00
daid
46bae30573
Merge pull request #776 from whosawhatsis/fwretract
...
Fwretract fixes, cleanup
2014-02-18 10:39:28 +01:00
Marco
51ae4881ab
Fixed small typo that would prevent compiling
2014-02-18 09:47:36 +01:00
Marco
498d76fd79
Fixed some messages where the text shown on the screen was more than 17 characters
2014-02-18 09:40:10 +01:00
Jim Morris
af9395ac2e
Add M605 to dynamically set delta configuration
...
Save above configs in eeprom
fix docs in createTemperatureLookupMarlin.py
add missing azteegX3pro digipot settings in delta example config
2014-02-17 20:50:59 -08:00
nothinman
fd42f0d226
Merge pull request #783 from MissionSt/fix/syntax-error
...
Fix compile error
2014-02-17 20:59:43 +00:00
nothinman
96217bf36a
Merge pull request #777 from PxT/M114
...
Add whitespace to M114 output
2014-02-17 18:07:47 +00:00
Marco
cf5c3b6610
Added dutch to language.h
2014-02-17 17:00:50 +01:00
Gabe Rosenhouse
d1c64b9dc4
Fix syntax error introduced in 477b6fa1d
2014-02-17 07:56:19 -08:00
Cylindric
5d50819791
Various typo fixes - only in comments, no code changes.
2014-02-17 13:04:44 +00:00
nothinman
3f455889d0
Merge pull request #769 from Cylindric3D/typofixes_1
...
Various typo fixes - only in comments, no code changes.
2014-02-17 11:30:01 +00:00
nothinman
4ddedb3b27
Merge pull request #780 from Cylindric3D/typofixes_2
...
Various typo fixes #2 - only in comments, no code changes.
2014-02-17 11:29:18 +00:00
nothinman
d4ba23bc28
Merge pull request #770 from josefpavlik/Marlin_v1
...
Marlin v1
2014-02-17 11:27:05 +00:00
nothinman
bbb424bd2f
Merge pull request #779 from MissionSt/makefile-fix-abl
...
Makefile fixes
2014-02-17 11:22:34 +00:00
Cylindric
8f0cee2a14
Various typo fixes - only in comments, no code changes.
2014-02-17 10:58:36 +00:00
Cylindric
08263ae66e
Merge branch 'Marlin_v1' into typofixes_1
2014-02-17 10:28:20 +00:00
Gabe Rosenhouse
5bd09d26e2
Makefile works with auto bed leveling
2014-02-16 23:23:29 -08:00
Gabe Rosenhouse
b45beeffd6
typo fix in Makefile
2014-02-16 23:23:29 -08:00
Paul Telford
306588925d
Add whitespace to M114 output
2014-02-16 21:01:19 -08:00
whosawhatsis
c43838bb1e
disable auto retract by default
...
This should make it safe to enable FWRETRACT by default, with
autoretract (which should now be fixed) only enabled by M209. FWRETRACT
should probably now default to enabled (to make G10/G11 and M207-209
available, without changing functionality when they are not used), but
I’ll save that for another pull request/discussion.
2014-02-16 19:04:54 -08:00
whosawhatsis
99f0e44864
Move FWRETRACT defaults to configuration_adv.h
2014-02-16 19:00:28 -08:00
whosawhatsis
66e3869138
Fix autoretract
...
This takes the (now working) G10/G11 code and moves it to a function,
which is called by G10 and G11, and also called by G1 if autoretract is
enabled and a retract/recover move is detected.
2014-02-16 18:59:04 -08:00
whosawhatsis
2f2459c0db
Fix G10/G11 Z-lift
2014-02-16 18:15:34 -08:00
Gabe Rosenhouse
8c5675c290
Use language.h instead of English literals for "bed"
2014-02-16 17:16:00 -08:00
Gabe Rosenhouse
0f7393a13e
Refactor 'accurate' auto bed leveling to use probe_pt()
2014-02-16 10:44:15 -08:00
Gabe Rosenhouse
c4fbb44d6d
Refactor 3-point auto bed leveling to use probe_pt()
2014-02-16 10:44:08 -08:00
Gabe Rosenhouse
ad2c6488c7
Add probe_pt(), useful for auto bed leveling
2014-02-16 10:38:29 -08:00
Peter
c9c83a4560
Updated gen3+ board pins names to current convention
2014-02-16 00:47:06 +13:00
Mark Hanford
ab0d3c4fb3
Various typo fixes - only in comments, no code changes.
2014-02-14 11:48:24 +00:00
Josef Pavlik
477b6fa1df
move engaged from lcd console refreshes power off timeout
2014-02-14 12:37:21 +01:00
Josef Pavlik
831fc2a952
Pt100 and Pt1000 temperature sensors handling
2014-02-14 12:26:27 +01:00
nothinman
7dcd350941
A few changes to Russian, changed LCD strings to be <=17 characters.
2014-02-13 11:58:14 +00:00
daid
c31bb2b7ad
Only show the ZProbe offset when auto-bed-leveling is enabled.
2014-02-13 11:48:55 +01:00
daid
46f5bea19f
Add configurable beep for UltiPanel.
2014-02-13 11:17:33 +01:00
daid
d16a770855
Ultimainboard 2.x does not has a PS_ON pin.
2014-02-13 10:57:03 +01:00
daid
71bb3a8133
Add comments for Ultimainboard 2.0 configuration.
2014-02-13 10:53:46 +01:00
daid
9b7d87e885
Remove duplicate contrast define.
2014-02-13 10:50:17 +01:00
daid
816f0a678a
Merge pull request #768 from whosawhatsis/Marlin_v1
...
multiple FWretract fixes
2014-02-13 09:14:57 +01:00
whosawhatsis
6e43398509
G10/G11 bugfixes
...
Previous version was broken by using G92 E0 between retract and recover.
2014-02-12 13:03:00 -08:00
whosawhatsis
d6c5c503d4
correct feedrate units in comments for M207/M208
2014-02-12 13:02:47 -08:00
nothinman
15d6116188
Merge pull request #689 from cajun-rat/tidy
...
Use C++ initialization list
2014-02-12 16:38:11 +00:00
Martin Lukasik
0b9ecf3824
Language cleanup, part 1.
2014-02-12 13:21:26 +00:00
whosawhatsis
b5ba5c1465
Merge branch 'Marlin_v1' of https://github.com/whosawhatsis/Marlin into Marlin_v1
2014-02-11 19:06:03 -08:00
whosawhatsis
78e7654601
Keep FWRETRACT values in terms of millimeters when using M200
...
for volumetric E units
2014-02-11 19:05:35 -08:00
whosawhatsis
3f6d44d40b
Keep FWRETRACT values in terms of millimeters when using M200 for volumetric E units
2014-02-11 18:50:11 -08:00
Cylindric
363dc2f0e8
Merge branch 'Marlin_v1' into update_menu_plan
2014-02-12 00:51:16 +00:00
nothinman
5f797ca29f
Updated Polish, changed default firmware URL to Marlin.
2014-02-11 22:38:01 +00:00
Mark Hanford
0778f5f028
Add missing entries to the new Aragonian language.
2014-02-11 14:40:53 +00:00
Mark Hanford
54bab3e0d0
Merge branch 'Marlin_v1' into localisation
...
Conflicts:
Marlin/language.h
2014-02-11 14:35:28 +00:00
Mark Hanford
bdd0211aeb
Move strings in ultralcd.cpp into language.h.
2014-02-11 13:54:43 +00:00
Daniel Martinez
c8e5a82d49
keep English as default lang.
2014-02-09 18:24:24 +01:00
Daniel Martinez
f64592e362
Add Aragonese translation
2014-02-09 18:19:37 +01:00
ErikZalm
ac74f45dc0
Merge pull request #752 from MatixYo/patch-3
...
Update language.h
2014-02-09 17:52:26 +01:00
MatixYo
36086d3ca4
Update language.h
...
Updated Polish translations.
2014-02-07 19:15:51 +01:00
Cylindric
1781031f2d
Update LCD Menu Tree with current options, based on ultralcd.cpp and language.h.
2014-02-07 01:52:44 +00:00
Jim Morris
d485988bec
fix typo
2014-02-05 14:39:45 -08:00
Jim Morris
8a1fd25363
Default is to not define digipot_i2c
2014-02-05 14:28:23 -08:00
Jim Morris
5097c57d3a
Added pins for Azteeg X3 Pro under motherboard 68
2014-02-05 14:25:42 -08:00
Jim Morris
b819fc53ca
Add Azteeg X3 Pro as motherboard 68
...
Add digipot i2c control for MCP4451
Allow M907 to set i2c digipot currents in amps
Fix Makefile to allow Azteeg motherboards
Fix Makefile to allow Wire libraries only
Add beeper pin for Azteeg X3 Pro
2014-02-05 01:47:12 -08:00
ErikZalm
e1ae7952eb
Merge pull request #743 from Opticalworm/Marlin_v1
...
Improved support for panelolu2 encoder and buzzer
2014-02-03 12:33:10 -08:00
David Forrest
a5f53f0cf3
Heater wattage reporting for M105 using EXTRUDER_WATTS and BED_WATTS
2014-02-03 14:50:28 -05:00
Ronald
8d162e5bd7
Improved support for panelolu2 encoder and buzzer
...
I added #define for LCD_FEEDBACK_FREQUENCY_HZ and
LCD_FEEDBACK_FREQUENCY_DURATION_MS which is used to alter the default
buzzer sound.
When selecting Panelolu2 in configuration.h:
- it automatically sets the correct ENCODER_PULSES_PER_STEP and
ENCODER_STEPS_PER_MENU_ITEM.
- if LCD_USE_I2C_BUZZER is defined it will also set the default
LCD_FEEDBACK_FREQUENCY_HZ and LCD_FEEDBACK_FREQUENCY_DURATION_MS
When selecting the sanguinololu 1284p the following is true:
- its now enables LARGE_FLASH
- It enables the gcode M300 when the panelolu2 LCD_USE_I2C_BUZZER is
defined
2014-02-03 07:45:03 +00:00
whosawhatsis
b2c11ba980
Change diameter code to 'D'
...
For some reason that I can’t figure out, the decimal is dropped when
using ’S’ for the code.
Also some minor code improvements to M200.
2014-02-01 18:49:25 -08:00
ErikZalm
61059385a3
Merge pull request #737 from whosawhatsis/M200
...
M200 implementation
2014-02-01 10:37:49 -08:00
whosawhatsis
856edfcc0d
Fixed math
...
This is why I wanted to sleep on the code I wrote while falling asleep
rather than immediately submitting a pull request.
2014-01-31 08:43:11 -08:00
ErikZalm
0d81ae77bc
Merge pull request #727 from drf5n/oversampling
...
temperature.cpp: Actually use OVERSAMPLENR in the oversampling calculation.
2014-01-31 07:09:10 -08:00
ErikZalm
84df13f7d1
Merge pull request #721 from drf5n/lcdOnly
...
Enable basic ULTRA_LCD screen w/o encoders and menus.
2014-01-31 07:07:12 -08:00
ErikZalm
4c7e9502ad
Merge pull request #718 from drf5n/temptableRes
...
createTemperatureLookupMarlin.py: Add resolution comments and format for...
2014-01-31 07:06:02 -08:00
ErikZalm
652a0f6b5a
Merge pull request #717 from drf5n/tpins2
...
fastio.h: Add AT90USBxx_TEENSYPP_ASSIGNMENTS for teensyduino/Lincomatic/...
2014-01-31 07:05:20 -08:00
ErikZalm
96a0cdc541
Merge pull request #716 from drf5n/maketeensy
...
Makefile: Update for Arduino 1.0.5 and Teensyduino dependent boards (HAR...
2014-01-31 07:04:29 -08:00
whosawhatsis
d24df7af2c
M200 implementation
2014-01-31 00:54:19 -08:00
David Forrest
f0b8d5ba3d
createTemperatureLookupMarlin.py: Change comment to refer to actual program name.
2014-01-29 23:34:22 -05:00
David Forrest
50f44d9249
createTemperatureLookupMarlin.py: Truncate to short after application of OVERSAMPLENR for improved resolution.
2014-01-29 23:24:07 -05:00
David Forrest
f5b5dd8038
createTemperatureLookupMarlin.py: Add output of Steinhart-Hart coefficients.
2014-01-29 22:59:47 -05:00
David Forrest
76cf07c3f7
Configuration.h: Use OVERSAMPLENR in dT_PID definition.
2014-01-21 23:25:51 -05:00
David Forrest
476c7193d8
temperature.cpp: Use OVERSAMPLENR in oversampling calculation.
2014-01-21 16:49:03 -05:00
whosawhatsis
f08bb8bb6a
Previous commit borked.
2014-01-19 22:06:45 -08:00
whosawhatsis
b1f8f492c6
Remove previous_millis_cmd update from extruder runout prevention code
...
This seems to defeat the purpose of previous_millis_cmd, preventing the
time elapsed from previous_millis_cmd from ever reaching
max_inactive_time or stepper_inactive_time while the heat was on.
2014-01-19 19:22:08 -08:00
whosawhatsis
8a5eaa3c9b
Fix crash after home bug
...
Fixes a bug in the Extruder Runout Prevention feature that caused the
extruder to move back to “current_position” after a move if it was
activated while the move was in progress. For long home moves (which
are longer than the dimensions of the machine’s working area), this
would cause the machine to crash into the far end of its travel after
homing. This usually occurred on the Z axis, which could result in
damage to the machine if you don’t hit the reset button in time.
2014-01-19 19:11:51 -08:00
David Forrest
61a7256d42
Enable basic ULTRA_LCD screen w/o encoders and menus.
2014-01-17 17:00:47 -05:00
l.lefebvre
fdac8f6cec
Update ConfigurationStore.cpp
...
Unable to compile if ENABLE_AUTO_BED_LEVELING is not set (not set by default).
2014-01-17 16:09:58 +01:00
Alex Borro
05932e4458
Add Z Probe Offset to EEPROM and Ultra LCD
2014-01-16 18:13:46 -02:00
David Forrest
7216583b8b
createTemperatureLookupMarlin.py: Add resolution comments and format for Marlin.
2014-01-16 12:40:15 -05:00
David Forrest
e8e0697e48
fastio.h: Add AT90USBxx_TEENSYPP_ASSIGNMENTS for teensyduino/Lincomatic/Printrboard compatibility.
2014-01-16 11:23:29 -05:00
David Forrest
75f39fadfc
Makefile: Update for Arduino 1.0.5 and Teensyduino dependent boards (HARDWARE_MOTHERBOARD=={8,81,82,83,84})
2014-01-16 10:58:35 -05:00
daid
df194f75e1
Added PT100 support for Ultiboard2
2014-01-06 11:20:03 +01:00
daid
380144c20f
Add Ultiboard2 electronics. With PWM current settings. For the few people that have this new board as experiment in their UM-Original.
2014-01-06 11:05:02 +01:00
fsantini
6ae7f7870d
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into ErikZalm
...
Conflicts:
Marlin/Configuration.h
Marlin/Marlin_main.cpp
2013-12-23 12:20:32 +01:00
Phil Wise
17d6d965dc
Use C++ initialization list
...
This is the recommended approach for object initialization. The change
doesn't affect binary size (although in theory it could make it smaller).
2013-12-19 21:21:46 +00:00
Joseivaldo Benito Junior
ce8b9c4fc5
Correct missing parameter from last upmerge
...
Signed-off-by: Joseivaldo Benito Junior <jrbenito@benito.qsl.br>
2013-12-19 00:50:44 -02:00
Joseivaldo Benito Junior
8e48e24c7f
Update Delta example files
...
Signed-off-by: Joseivaldo Benito Junior <jrbenito@benito.qsl.br>
2013-12-18 00:04:36 -02:00
ErikZalm
46d2443c7d
Merge pull request #676 from IVI053/Marlin_v1
...
Minor improvements for encoder configuration, LCD entry for PSU controll and thermistor pins on RAMPS
2013-12-17 02:28:28 -08:00
-
eed053dffb
Revert "Made numbering of heat bed thermistor more logical as D8 is bed, D9 is Extruder 2 and D10 is Extruder 1, so T0 should be E1, T1 E1 and T2 bed to be sequential as MOSFET-Outputs"
...
This reverts commit b7eadb9f37
2013-12-16 12:22:06 +01:00
Erik van der Zalm
8349fc89a4
Fixed planner bug
2013-12-16 11:40:23 +01:00
Francesco Santini
da2a6f9a31
Accurate bed leveling: x loop inside y and zigzag motion
2013-12-13 10:31:19 +01:00
RicardoGA
d29615dc0c
Z and Y dual stepper drivers error
...
if you try to enable Z_DUAL_STEPPER_DRIVERS the error "You cannot have dual drivers for both Y and Z" shows even if you don't have defined Y_DUAL_STEPPER_DRIVERS and don't let you compile the firmware
to solve this problem i change this line:
#ifdef Z_DUAL_STEPPER_DRIVERS && Y_DUAL_STEPPER_DRIVERS
to:
#if defined (Z_DUAL_STEPPER_DRIVERS) && defined (Y_DUAL_STEPPER_DRIVERS)
now the error only show if you define both Z_DUAL_STEPPER_DRIVERS and Y_DUAL_STEPPER_DRIVERS
2013-12-11 14:37:43 -06:00
fsantini
5bde7fcb28
Minor code and comment polishing
2013-12-11 21:27:43 +01:00
-
20faff5935
Incorporate PS_DEFAULT_OFF for starting state on LCD menu entry
2013-12-08 21:35:57 +01:00
-
e5d3044801
Added posibility to set ENCODER_STEPS_PER_MENU_ITEM in Configuration.h like ENCODER_PULSES_PER_STEP as it depends on it for usability
2013-12-08 21:34:56 +01:00
-
b7eadb9f37
Made numbering of heat bed thermistor more logical as D8 is bed, D9 is Extruder 2 and D10 is Extruder 1, so T0 should be E1, T1 E1 and T2 bed to be sequential as MOSFET-Outputs
2013-12-08 21:30:42 +01:00
Michal Dyntar
e8786bf110
Added support for Cheaptronic v1 electronic
2013-12-07 13:29:47 +01:00
fsantini
cc2925b705
Implemented a least squares fit of the bed equation for auto bed leveling.
...
The code for the LSQ solver (qr_solve) is copyrighted by John Burkardt and released under LGPL here:
http://people.sc.fsu.edu/~%20jburkardt/c_src/qr_solve/qr_solve.html
(see qr_solve.cpp for further copyright information)
2013-12-06 21:46:25 +01:00
fsantini
b64661070e
Fixed the plane vector equation to a simpler one (only dependent on the normal)
...
Removed the calculation of the inverse matrix since the rotation matrix is orthogonal, therefore inverted == transposed.
Much simpler and mathematically robust.
2013-12-06 21:32:21 +01:00
Alex Borro
5c44f6c434
Bed Heater monitoring in Controller Fan
...
In some cases the Bed Heater FET heats up more then stepper drivers, so
this change add the bed monitoring to the controller fan. As soon as the
bed heater is turned on, the controller fan will run as well.
2013-11-27 23:23:06 -02:00
Alex Borro
b33375d438
Z Axis Safe Homing when using Z Probe
...
Recommended for those who are using the Z Probe for Z Homing (as
Z-Endstop)
This feature has two changes:
1) Allow user to choose where the Z Probe will touch the bed when homing
all axis together (G28) by setting below defines:
Z_SAFE_HOMING_X_POINT
Z_SAFE_HOMING_Y_POINT
2) Prevents the user to perform Z Axis Homing when the Z Probe is
outsite bed.
2013-11-27 22:37:35 -02:00
Alex Borro
35905ea4f9
Allow heaters to stay full On when PWM=127
...
In previous version, even with PWM = 127, the system turns the FET off
and then on in the next cycle. This bevavior may increase the FET heat
dissipation.
It was fixed keeping the FET always On when PWM=127.
2013-11-27 18:13:38 -02:00
Erik van der Zalm
a94e588765
Changed slow buttons behavior.
2013-11-17 17:41:30 +01:00
Erik van der Zalm
69af392554
Added HEATERS_PARALLEL (Request from reifsnyderb)
...
This allows a hot end with two heaters and a FET for each heater. This is useful if the FET is not capable of heating two heaters.
2013-11-17 13:29:02 +01:00
Erik van der Zalm
48a185d004
Fixed compile errors from bad commits.
2013-11-10 16:36:37 +01:00
ErikZalm
24d1f480b6
Merge pull request #647 from shaggythesheep/newfeature-M226
...
Implement M226 - GCode Initiated Pause
2013-11-10 07:27:01 -08:00
ErikZalm
95b41413e6
Merge pull request #641 from hugokernel/master
...
M80 - ATX Power On related modification
2013-11-10 07:26:35 -08:00
ErikZalm
59b96e323e
Merge pull request #640 from fmalpartida/SAV-MkI
...
Added support for BT on AT90USB devices, corrected LCD bug, added new board and LCD
2013-11-10 07:26:08 -08:00
ErikZalm
2433ee6fc8
Merge pull request #637 from justuswilhelm/Marlin_v1
...
Fix servo control for Melzi v2.0
2013-11-10 07:22:12 -08:00
ErikZalm
3455a2bac2
Merge pull request #636 from PrintToPeer/Marlin_v1
...
Add UUID support to M115 responses.
2013-11-10 07:21:46 -08:00
Richard Miles
dc887ef99b
Implement M226 - GCode Initiated Pause
...
Implemented M226 as described here:
http://reprap.org/wiki/G-code#M226:_Gcode_Initiated_Pause
Waits for pin to be become either HIGH, LOW or the inverse of what it
was before. Allows printing to pause until user interaction
2013-11-09 15:11:58 +00:00
Charles R
c244eb860c
If you have a switch on suicide pin, this is useful if you want to
...
start another print with suicide feature after a print without
suicide...
2013-11-04 12:04:04 +01:00
fmalpartida
7b556d2e96
Added BT support on AT90USB devices
...
Added AT90USB device BT connectivity support using second UART.
2013-11-03 19:57:06 +01:00
Kaz Walker
a5e8575829
Add UUID support to M115 responses.
2013-11-01 14:51:50 -06:00
Daniel Benamy
cab84e0e5b
Add (correct) missing pin definitions for Y2
...
I tested this and it works.
2013-10-30 22:44:20 -04:00
fmalpartida
5b3f60ea2e
Corrected LCD only error
...
If only an LCD is defined and no menu or keyboard defined, there is a
compilation error.
Added conditional compilation.
2013-10-30 21:52:46 +01:00
Justus Perlwitz
62d0b79023
Fix servo control for Melzi
2013-10-30 20:59:58 +01:00
fmalpartida
b5a964fcc5
Initial SAV MkI (RepRap CloneWars board) integration.
...
Included support for BT dongle on AT90USB boards.
Added LCD Shift Register LCD control
Included support for RepRap Clone Wars project board (SAV MKI).
2013-10-30 11:45:32 +01:00
dumle29
f941203172
PS_ON configurable boot state
...
Allows the user to select wheter or not the PSU should be turned on or
kept in standby when marlin boots
2013-10-29 18:44:56 +01:00
whosawhatsis
c79e3967b3
Make G11 not horribly broken
2013-10-24 18:58:42 -07:00
bkubicek
d69822ed51
Fix '#'
...
since it can occure in comments.
2013-10-22 10:34:51 +02:00
bkubicek
2fb2a0a119
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2013-10-22 10:08:21 +02:00
bkubicek
39d88bcccb
preparation for hibernation
...
If a print is stopped, it would be nice in the future to write a file with the printer state, the filename of the print, and the position within the print.
this file could be read, to continue a previously stopped print.
not finished yet.
2013-10-22 10:04:08 +02:00
bkubicek
ab965376ff
Sub-file calls.
...
by overloading M32 it is now possible to execute gcode files from other gcode files, with a fixed recursion level.
This can be used e.g. for having a real start.g and end.g somewhere on the sd card, which are then called from the normal print file.
Another usecase would be to have macro-files for nozzle-change and layerchange.
I have not tested the speedwise performance. The testing was done with pronterface.
syntax:
normal call from sd card will open the new file and continue executing there.
M32 !/path/filename#
this however will call the new file and return to the caller file.
M32 P !/path/filename#
with the optional "S<position>" the file starting position can be set.
this is for continuing prints from a previous location.
2013-10-22 10:02:18 +02:00
bkubicek
b2cc27e5ea
Added a magic character for sd buffering.
...
if a '#' is read now the buffer will be emptied before reading ahead.
This is so one can execute files from within gcode files, without messing the buffer with preread characters from the caller file.
# can not occure in sd files imho, because it should only occure within checksums in ther serial communication.
Yes, thats a lame argument. If you have a better idea please tell me. It has to be a character that one can type
on a keyboard manually.
2013-10-22 09:54:13 +02:00
Erik van der Zalm
8a08cca0f2
Added temperature status less.
...
Hopefully fixed viky button handling without braking other boards
2013-10-20 12:12:35 +02:00
Erik van der Zalm
667d278f54
Revert "Fix for Viki display"
...
This reverts commit 314fd13c39
2013-10-20 10:16:46 +02:00
Erik van der Zalm
bf27e79e74
Small BlinkM fix
2013-10-20 10:06:02 +02:00
Erik van der Zalm
87e28c0599
Added ifdefs to blinkm
2013-10-20 09:55:15 +02:00
Erik van der Zalm
24c6b2ab35
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2013-10-20 09:51:58 +02:00
ErikZalm
6a803ba9c5
Merge pull request #590 from timkoster/Marlin_v1
...
Added BlinkM support over i2c
2013-10-20 00:51:35 -07:00
Erik van der Zalm
457d8a0acb
Fixed merge conflicts
2013-10-20 09:50:27 +02:00
Alex Borro
6f85a8c7aa
Bed auto Leveling change: Raise Z before homing
...
- Added "Z_RAISE_BEFORE_HOMING" for raising Z the defined distance
before homing. This is useful to avoid Z-Probe collision when hotend is
near bed.
- Fixed the issue of Z not going bellow Z_PROBE_OFFSET when
"min_software_endstops" is true.
Now the Z_PROBE_OFFSET is not set in Z_MIN_POS, it is added after
homing.
2013-10-12 17:28:11 -03:00
Alex Borro
dd3086d3f2
Show Temperature ADC values
...
If "SHOW_TEMP_ADC_VALUES" is defined in Configuration_adv.h, the M105
command will present, after tradicional temperatures, the ADC value read
from temp sensors. This is great for adjusting thermistor tables with
thermocouple.
From Pronterface you can see the ADC value and compare with a
thermocouple reading.. then you just need to create your own thermistor
table.
Since this merge doesnt change the original information, it doesnt mess
with PC software parsing (tested under Pronterface and Repetier-Host).
2013-10-12 10:41:23 -03:00
bkubicek
7fad13a1e2
Reverse SD card file name order.
...
This is _not_ automatically the cronological, since deleting a file will free
the filesystem descriptor for it, which then will be used by the next file copied on it.
Since this makes the auto0.g file very inaccessible, I put the option back, to have it in the prepare menu.
this should satisfy https://github.com/ErikZalm/Marlin/pull/373
as a reminder, auto0.g will be executed every time after a boot with sd card present and file present.
thereafter, if there is a file auto1.g this will be done. Thats IMHO the best place to put settings, and prepare heating.
I also execute again after each (now again via the prepare menu) before starting a new print/ after a failed one.
It for me 100% replaces any start.gcode form the slicers.
2013-10-12 13:24:55 +02:00
bkubicek
b832f5b9f6
added delta tower babystepping. Its untested, but hopefully florian horsch will be able to try.
...
also, removed some trouble for compilation with corexy.
I think that babystepping is only possible in z for a delta tower.
not sure if it would be usefull to step individual motors on a delta, i don't own one
2013-10-07 09:14:04 +02:00
bkubicek
c38b0855c8
I think that filament change is ready for the masses. I have tested very often with my ultimaker.
...
I strongly vote for it being a single gcode, because otherwise the triggering from the menu is terrible.
2013-10-06 21:20:26 +02:00
bkubicek
d147a057ac
Add the socalled "Babystepping" feature.
...
It is a realtime control over the head position via the LCD menu system that works _while_ printing.
Using it, one can e.g. tune the z-position in realtime, while printing the first layer.
Also, lost steps can be manually added/removed, but thats not the prime feature.
Stuff is placed into the Tune->Babystep *
It is not possible to have realtime control via gcode sending due to the buffering, so I did not include a gcode yet. However, it could be added, but it movements will not be realtime then.
Historically, a very similar thing was implemented for the "Kaamermaker" project, while Joris was babysitting his offspring, hence the name.
say goodby to fuddling around with the z-axis.
2013-10-06 21:14:51 +02:00
Erik van der Zalm
bca353cc12
Fixed duplicate define in fastio.h
2013-10-03 19:24:53 +02:00
Alex Borro
253dfc4bc1
Bed Auto Leveling feature
...
Check the Readme for instruction how to enable and configure the feature
2013-09-29 13:20:06 -03:00
ErikZalm
1bda6bf862
Merge pull request #609 from phq1910/patch-1
...
Update Configuration.h
2013-09-26 11:47:58 -07:00
ErikZalm
c80aac1518
Merge pull request #610 from phq1910/patch-2
...
Update pins.h
2013-09-26 11:47:47 -07:00
Erik van der Zalm
314fd13c39
Fix for Viki display
2013-09-26 20:32:19 +02:00
phq1910
4f7c6dfe35
Update pins.h
...
Include Pins cpu Sethi 3D
2013-09-26 11:40:54 -03:00
phq1910
57173739a1
Update Configuration.h
...
Include CPU Sethi 3D
2013-09-26 11:29:44 -03:00
Erik van der Zalm
0dca49a7c0
Added Azteeg X3 board.
2013-09-24 17:31:16 +02:00
Erik van der Zalm
d8c2c810b4
Added info to the delta configuration files in the configuration.h file
2013-09-23 23:29:46 +02:00
Erik van der Zalm
9bc88f8bab
Placed optional ENCODER_PULSES_PER_STEP in the configuration.h file
2013-09-23 23:25:11 +02:00
Erik van der Zalm
3ca1ca6869
Fixed missing ENCODER_PULSES_PER_STEP
2013-09-23 23:18:35 +02:00
Tim Koster
97b0da0c2e
Removed #ifndef BLINKM
2013-09-22 10:43:27 +03:00
Tim Koster
61db046b32
Added #ifdef BLINKM around new code. Also refined BlinkM.h.
2013-09-20 10:57:42 +03:00
Richard Miles
77df2ab0e7
Make Y_DUAL_STEPPER_DRIVERS disabled by default
2013-09-17 21:49:44 +01:00
Richard Miles
ed1ab42186
Added Y_DUAL_STEPPER_DRIVERS
...
Enables two stepper drivers to be used for the Y axis (useful for
Shapeoko style machines)
Each Y driver can be stepped in either the same way or in opposite
directions, accounting for different hardware setups (leadscrew vs. belt
driven)
2013-09-17 19:19:20 +01:00
Richard Miles
f4a59e4ce5
Revert "Added Y_DUAL_STEPPER_DRIVERS"
...
This reverts commit 7ee275b620
2013-09-17 19:05:49 +01:00
Richard Miles
7ee275b620
Added Y_DUAL_STEPPER_DRIVERS
...
Enables two stepper drivers to be used for the Y axis (useful for
Shapeoko style machines)
Each Y driver can be stepped either the same way or in opposite
directions, accounting for different hardware setups (leadscrew vs. belt
driven)
2013-09-17 19:02:00 +01:00
ErikZalm
6a1e980c6d
Merge pull request #600 from xoan/Encoder_Pulses_Per_Step
...
add ENCODER_PULSES_PER_STEP
2013-09-14 04:56:45 -07:00
ErikZalm
20076a8bd3
Merge pull request #598 from GDV0/Marlin_v1
...
FIx compilation error when enabling SERVO_ENDSTOPS (#591 )
2013-09-14 04:54:19 -07:00
Erik van der Zalm
3626b5ad8b
Removed Delta from the default config file.
...
Changed EEPROM CHITCHAT behavior. M503 is always enabled.
2013-09-14 13:50:09 +02:00
Xoan Sampaiño
bf7007d02f
add ENCODER_PULSES_PER_STEP
2013-09-13 04:12:51 +02:00
GDV0
f17506c504
FIx compilation error when enabling SERVO_ENDSTOPS ( #591 )
2013-09-11 23:09:37 +02:00
Martin Lukasik
acd8619809
Fan fix for Panelolu2+Sanguinololu.
2013-09-10 22:10:58 +01:00
George Roberts
595580556c
Fixed bug that makes ulticontroller knob backwards introduced Feb 28 2013 by Robert.
...
Bug introduced in version 6beb42cdf6839bef6d5d
2013-09-10 09:56:19 -04:00
Tim Koster
88dfeefca3
Define BlinkM default disabled
2013-09-10 12:32:21 +03:00
Tim Koster
5350faf2a2
Merge https://github.com/timkoster/MarlinBlinkM into Marlin_v1
2013-09-10 12:27:26 +03:00
Tim Koster
7016cc9511
Added BlinkM support over i2c
2013-09-10 12:18:29 +03:00
Tim Koster
3b315b3da0
Added BlinkM support over i2c
2013-09-06 22:25:39 +03:00
Jim Morris
f26f26b7bd
Fix the example delta configuration as someone forgot to do it.
2013-09-05 16:36:55 -07:00
Peter Hercek
9aa2229077
add command M666 for adjusting delta printer endstop position
2013-08-28 01:15:20 +02:00
Robert F-C
9547fb9dfb
Add duplication and auto-park mode for dual x-carriage support.
2013-08-08 00:10:26 +10:00
Steve Kelly
53614e5144
add pins for rambo lcd
2013-08-03 11:45:53 -05:00
Steve Kelly
b42d24e31e
add additional pins to avr2560 for rambo lcd
2013-08-03 11:37:12 -05:00
Nicolas Rossi
b0c8120fcc
Added feedrate setting in exemple config for manual moves from panel
2013-08-03 13:09:53 +02:00
Nicolas Rossi
a54fe2d73c
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin.git into Marlin_v1
...
Conflicts:
Marlin/Marlin_main.cpp
2013-08-03 13:05:56 +02:00
ErikZalm
7ea63d08df
Merge pull request #565 from iXce/avrdudeconfpath
...
Detect OS in Makefile to use the correct avrdude.conf path
2013-08-02 13:16:07 -07:00
ErikZalm
4187b637a5
Merge pull request #570 from hg42/separate-INVERTING-macros-for-MIN-and-MAX-endstops
...
separate INVERTING for MIN and MAX endstops (6 #defines instead of 3)
2013-08-02 13:15:30 -07:00
ErikZalm
07e7de3600
Merge pull request #569 from hg42/convert-PROTOCOL-macros-from-statements-to-expressions
...
convert PROTOCOL macros from statements to (multiple, comma separated) expressions
2013-08-02 13:13:29 -07:00
Guillaume Seguin
c0c4c97db6
Detect OS in Makefile to use the correct avrdude.conf path
2013-08-01 19:20:27 +02:00
hg42@gmx.net
2ca983568d
separate INVERTING for MIN and MAX endstops (6 #defines instead of 3)
2013-08-01 15:06:39 +02:00
hg42@gmx.net
3700f688f5
convert PROTOCOL macros from statements to (multiple, comma separated) expressions
2013-08-01 14:56:39 +02:00
daid
a504c88346
Fix a bug where the PID controllers D action kicks in hard as soon as the PID controller starts.
2013-08-01 14:12:30 +02:00
Nicolas Rossi
394ed08f88
Added feedrate setting for manual moves from panel
2013-07-30 14:33:30 +02:00
Nicolas Rossi
9bf1cf1b22
Pre-calculate diagonal rod length squared
2013-07-30 14:09:21 +02:00
Nicolas Rossi
4623e78ce0
Added Honeywell thermistor 135-104LAF-J01
2013-07-30 14:02:18 +02:00
Brendan-csel
d7f384f680
Skip SD menu refresh if nothing has changed
2013-07-30 14:02:15 +02:00
Brendan-csel
abc8320a68
Save LCD_CLICKED before it is cleared
...
The SD card menu was refreshing so slowly that the button interrupt was clearing LCD_CLICKED before the menu items could check it.
2013-07-30 14:02:13 +02:00
Guillaume Seguin
f4c3135c6d
Add Panelolu2 pins for RAMPS1.3
2013-07-30 14:02:11 +02:00
Guillaume Seguin
aae42c68f9
Update French translation in language.h
2013-07-30 14:02:08 +02:00
Guillaume Seguin
4d435c38a6
Add support of LiquidTWI2-based panels to Makefile
...
Use LIQUID_TWI2=1 as make argument to enable this support
2013-07-30 14:02:06 +02:00
Guillaume Seguin
6c42a3a339
Woops, fix logic
2013-07-30 14:02:04 +02:00
Guillaume Seguin
376d8af2c8
Report temperatures for all extruders
2013-07-30 14:02:01 +02:00
ErikZalm
434b6a05c1
Merge pull request #552 from iXce/Marlin_v1
...
Report temperatures for all extruders in reply to M105
2013-07-29 10:39:21 -07:00
ErikZalm
bdc2621119
Merge pull request #561 from Brendan-csel/Marlin_v1
...
Fix for Viki LCD issues printing from SD card
2013-07-29 10:38:17 -07:00
ErikZalm
6965bd4e15
Merge pull request #560 from njprossi/Marlin_v1
...
Fixed move from panel for delta bot #557
2013-07-29 10:37:40 -07:00
ErikZalm
a55b33e613
Merge pull request #559 from iXce/panelolupinsramps13
...
Add Panelolu2 pins for RAMPS1.3
2013-07-29 10:37:03 -07:00
ErikZalm
8b34351537
Merge pull request #558 from iXce/frenchupdate
...
Update French translation in language.h
2013-07-29 10:36:43 -07:00
ErikZalm
735e556724
Merge pull request #555 from iXce/liquidtwi2_makefile
...
Add support of LiquidTWI2-based panels to Makefile
2013-07-29 10:33:54 -07:00
Brendan-csel
d80aecda0a
Skip SD menu refresh if nothing has changed
2013-07-29 21:00:29 +12:00
Brendan-csel
be2dea1dc6
Save LCD_CLICKED before it is cleared
...
The SD card menu was refreshing so slowly that the button interrupt was clearing LCD_CLICKED before the menu items could check it.
2013-07-29 20:58:09 +12:00
Nicolas Rossi
55c287a69e
Fixed move from panel for delta bot #557
2013-07-28 22:54:37 +02:00
Guillaume Seguin
1902d339b0
Add Panelolu2 pins for RAMPS1.3
2013-07-28 19:19:57 +02:00
Guillaume Seguin
eb23a68e92
Update French translation in language.h
2013-07-28 18:50:47 +02:00
ErikZalm
1561c6df51
Merge pull request #547 from wolfmanjm/delta-configuration
...
Setup Default configuration for Deltas if DELTA is defined
2013-07-24 03:11:36 -07:00
Guillaume Seguin
374bc99fa3
Add support of LiquidTWI2-based panels to Makefile
...
Use LIQUID_TWI2=1 as make argument to enable this support
2013-07-24 12:09:53 +02:00
Jim Morris
ab624eac2a
revert COnfiguratiuon to the same as head
2013-07-24 02:57:46 -07:00
Jim Morris
52f79ffeca
add an example default configuration for delta style bots
2013-07-24 02:55:52 -07:00
Jim Morris
b9d7ccf1cd
Merge remote-tracking branch 'upstream/Marlin_v1' into delta-configuration
...
Conflicts:
Marlin/Marlin_main.cpp
2013-07-24 02:49:25 -07:00
Guillaume Seguin
d4d1540727
Use -fno-use-cxa-atexit to override gcc --enable-cxa_atexit
2013-07-24 11:19:38 +02:00
Guillaume Seguin
01ed99143c
Woops, fix logic
2013-07-23 23:34:42 +02:00
Guillaume Seguin
76841450c8
Only display poweron/poweroff if PS_ON_PIN > -1
2013-07-23 22:28:30 +02:00
Guillaume Seguin
44f327d738
Uniformly reindent language.h
2013-07-23 22:13:40 +02:00
Guillaume Seguin
326d2db025
Update language.h so that all languages compile
...
Some strings still need translation, but at least everything compiles.
2013-07-23 22:11:54 +02:00
Guillaume Seguin
2cb716f513
Run Marlin/language.h through dos2unix
2013-07-23 21:49:37 +02:00
Guillaume Seguin
34da3a0a3f
Merge github.com:ErikZalm/Marlin into Marlin_v1
...
Conflicts:
Marlin/language.h
2013-07-23 21:46:41 +02:00
Guillaume Seguin
18199ff960
Merge github.com:ErikZalm/Marlin into Marlin_v1
2013-07-23 21:33:52 +02:00
Robert F-C
fb5334f428
Fixed compile error when QUICK_HOME is defined.
...
As well a couple of minor changes to handling of extruder offset for
dual x-carriage mode.
2013-07-22 22:46:14 +10:00
Robert F-C
c3568398b5
Disable DUAL_X_CARRIAGE by default
2013-07-20 23:50:30 +10:00
Robert F-C
39cd3dbdbe
Remove dual x-carriage functionality that could/should be implemented in slicer
...
Also added a couple of missed merge lines in homeaxis() from previous
commit.
2013-07-20 13:07:50 +10:00
Jim Morris
fb20ceabce
enable soft endstops for delta
...
disable delta by default
2013-07-17 16:21:51 -07:00
Jim Morris
d01ee7e7b5
fix zjerk being the same for delta as xy jerk
...
add more delta defaults
on delta make second home even slower
2013-07-17 16:14:07 -07:00
Robert F-C
d7390e13d9
Support dual x-carriage printers
...
Dual x-carriage designs offer some substantial improvements for dual
extruder printing.
2013-07-17 22:44:45 +10:00
Jim Morris
f3aa2a48e7
update max pos
2013-07-17 01:29:51 -07:00
Jim Morris
460751503e
Added default configurations for deltas when DELTA is defined
2013-07-17 01:17:27 -07:00
Maik Stohn
9da94c247a
fixed bad lcd commit from makr3d
...
#elsif does not exist #elif is correct
2013-07-15 17:34:21 +02:00
Erik van der Zalm
59004023fd
Fixed typo
2013-07-15 17:22:56 +02:00
Erik van der Zalm
461dad6e05
Added : M32 - Select file and start SD print (Can be used when printing from SD card)
...
Untested
2013-07-14 22:39:59 +02:00
Erik van der Zalm
c4a2077951
M109 and M190 now wait when cooling down if R is used instead of S.
...
M109 S180 waits only when heating.
M109 R180 also waits when cooling.
2013-07-14 21:10:24 +02:00
ErikZalm
8a2a3ef91d
Merge pull request #531 from iXce/Marlin_v1_lcd
...
Only clamp panel movements if software endstops are enabled
2013-07-14 06:50:23 -07:00
Erik van der Zalm
6397b3339c
restored configuration.h defaults
2013-07-14 15:49:03 +02:00
Erik van der Zalm
cdaaad3df1
Merge branch 'Marlin_v1' of https://github.com/makr3d/Marlin into makr3d-Marlin_v1
2013-07-14 15:45:49 +02:00
Erik van der Zalm
e3bdefd873
fixed missing #endif
2013-07-14 15:42:53 +02:00
Erik van der Zalm
a5be0c52c6
no message
2013-07-14 15:35:54 +02:00
Michael Mayer
e509cdbeb0
added contrast control function for gLCDs
2013-07-14 15:28:26 +07:00
Michael Mayer
99b7e926e7
added MaKr3d Melzi board
2013-07-14 15:17:55 +07:00
Gabino Lopez
68be33b1fc
Update language.h
...
I update the spanish Messages, now this compile for spanish language.
2013-07-04 10:23:00 +02:00
daid
acb3271c9a
Merge pull request #534 from xifle/Marlin_v1
...
Fixes compiler warning for feedrate deadzone
2013-07-01 23:41:51 -07:00
xifle
61fe430d4f
Should fix compiler warning for feedrate deadzone
2013-07-01 11:10:02 +02:00
Gord Christmas
fde17d5720
Fix for ugly code compilation errors in SERVO_ENDSTOP checks
2013-06-28 08:02:04 -07:00
Guillaume Seguin
aa65c20d1f
Only clamp panel movements if software endstops are enabled
2013-06-28 14:18:00 +02:00
Erik van der Zalm
ecf3ab5de4
Added thermistor 60 to configuration.h
2013-06-27 23:25:51 +02:00
Nicolas Rossi
2daa85918e
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin.git into Marlin_v1
...
Conflicts:
Marlin/Configuration.h
Marlin/Marlin_main.cpp
Marlin/language.h
Marlin/pins.h
Marlin/ultralcd.cpp
2013-06-20 23:59:56 +02:00
Erik van der Zalm
2015989f84
Added DISABLE_MIN_ENDSTOPS
2013-06-18 19:20:26 +02:00
Christian Inci
648d45cfb2
Fix Pin Description Typo
...
Reverse 'Bed' and 'Fan' at the RAMPS 33 Description.
Signed-off-by: Christian Inci <chris.pcguy.inci@gmail.com>
2013-06-16 23:35:33 +02:00
ErikZalm
171719f18c
Merge pull request #525 from lajos/ultralcd_pid
...
ultralcd.cpp compile errors when !defined(PIDTEMP)
2013-06-16 00:02:54 -07:00
lajos
b519af4f05
fixed another !defined(PIDTEMP) compile in ultralcd.cpp
2013-06-15 20:49:18 -04:00
lajos
7d03c52511
fixed compile error in ultralcd.cpp when PIDTEMP undefined
2013-06-15 18:09:52 -04:00
lajos
02dee80fa5
added Azteeg X1 motherboard
2013-06-15 16:58:17 -04:00
Henrik Brix Andersen
47dc70e3ec
Fix location of avrdude.conf
2013-06-15 09:50:25 +02:00
Henrik Brix Andersen
1d258903bb
Allow command line compilation when using BEEPER.
2013-06-15 09:36:55 +02:00
Erik van der Zalm
e34c9981ab
Delta disabled by default
2013-06-11 22:33:58 +02:00
Erik van der Zalm
26a441fc7d
More 3Drag controller patches.
2013-06-10 18:26:15 +02:00
Erik van der Zalm
ac975ed8c2
Merge branch 'deltabot' into Marlin_v1
2013-06-10 18:20:29 +02:00
Jim Morris
caa848f943
fix homing for deltas
2013-06-09 21:10:00 -07:00
Erik van der Zalm
7ad12be763
Merge branch 'Marlin_v1' of https://github.com/codexmas/Marlin into codexmas-Marlin_v1
...
Conflicts:
Marlin/Configuration.h
README.md
2013-06-09 23:10:41 +02:00
Erik van der Zalm
408169aef4
Merge branch 'Marlin_v1' of https://github.com/BorisLandoni/Marlin into BorisLandoni-Marlin_v1
...
Conflicts:
Marlin/Configuration.h
Marlin/language.h
Marlin/pins.h
2013-06-09 22:57:40 +02:00
Erik van der Zalm
bd96d22bfb
Merge branch 'Marlin_v1' into thinkyhead
...
Conflicts:
Marlin/Configuration.h
Marlin/Configuration_adv.h
Marlin/Marlin.h
Marlin/Marlin_main.cpp
Marlin/Servo.cpp
Marlin/language.h
Marlin/pins.h
Marlin/planner.cpp
Marlin/ultralcd_implementation_hitachi_HD44780.h
README.md
2013-06-09 22:26:47 +02:00
Erik van der Zalm
73f21cd5d6
Spanish updated so far.
2013-06-09 21:40:35 +02:00
Erik van der Zalm
6f4a6e531c
Merge branch 'deltabot' into Marlin_v1
2013-06-09 13:55:18 +02:00
Erik van der Zalm
01edf22a10
Fix home_all_axis to make QUICK_HOME work with Repetier-Host which sends G28 X0 Y0 Z0 instead of G28. Thanks to Matt Schoenholz for reporting this issue.
2013-06-09 13:54:19 +02:00
Erik van der Zalm
ff6fa09ecf
Moved corexy implementation from stepper to planner
...
(Thanks iquizzle)
2013-06-09 13:10:06 +02:00
Erik van der Zalm
c8dcc7c208
Allow increasing the software PWM frequency.
2013-06-09 12:52:49 +02:00
Erik van der Zalm
8b0d82e9db
Removed "awaiting translation" for french
2013-06-09 12:24:06 +02:00
Erik van der Zalm
1e05d192ab
Make the beep tone less offensive
2013-06-09 12:21:16 +02:00
Erik van der Zalm
373f3ecab3
Merge branch 'deltabot' of https://github.com/jcrocholl/Marlin into deltabot
...
Conflicts:
Marlin/Configuration.h
Marlin/Marlin_main.cpp
Marlin/pins.h
2013-06-09 00:51:58 +02:00
